diff options
205 files changed, 6897 insertions, 1772 deletions
diff --git a/Documentation/ABI/stable/sysfs-devices-system-cpu b/Documentation/ABI/stable/sysfs-devices-system-cpu new file mode 100644 index 000000000000..33c133e2a631 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-devices-system-cpu @@ -0,0 +1,25 @@ +What: /sys/devices/system/cpu/dscr_default +Date: 13-May-2014 +KernelVersion: v3.15.0 +Contact: +Description: Writes are equivalent to writing to + /sys/devices/system/cpu/cpuN/dscr on all CPUs. + Reads return the last written value or 0. + This value is not a global default: it is a way to set + all per-CPU defaults at the same time. +Values: 64 bit unsigned integer (bit field) + +What: /sys/devices/system/cpu/cpu[0-9]+/dscr +Date: 13-May-2014 +KernelVersion: v3.15.0 +Contact: +Description: Default value for the Data Stream Control Register (DSCR) on + a CPU. + This default value is used when the kernel is executing and + for any process that has not set the DSCR itself. + If a process ever sets the DSCR (via direct access to the + SPR) that value will be persisted for that process and used + on any CPU where it executes (overriding the value described + here). + If set by a process it will be inherited by child processes. +Values: 64 bit unsigned integer (bit field) diff --git a/Documentation/devicetree/bindings/clock/corenet-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index 24711af48e30..5666812fc42b 100644 --- a/Documentation/devicetree/bindings/clock/corenet-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -7,6 +7,14 @@ which can then be passed to a variety of internal logic, including cores and peripheral IP blocks. Please refer to the Reference Manual for details. +All references to "1.0" and "2.0" refer to the QorIQ chassis version to +which the chip complies. + +Chassis Version Example Chips +--------------- ------------- +1.0 p4080, p5020, p5040 +2.0 t4240, b4860, t1040 + 1. Clock Block Binding Required properties: @@ -85,7 +93,7 @@ Example for clock block and clock provider: #clock-cells = <0>; compatible = "fsl,qoriq-sysclk-1.0"; clock-output-names = "sysclk"; - } + }; pll0: pll0@800 { #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/mfd/bfticu.txt b/Documentation/devicetree/bindings/mfd/bfticu.txt new file mode 100644 index 000000000000..65c90776c620 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/bfticu.txt @@ -0,0 +1,25 @@ +KEYMILE bfticu Chassis Management FPGA + +The bfticu is a multifunction device that manages the whole chassis. +Its main functionality is to collect IRQs from the whole chassis and signals +them to a single controller. + +Required properties: +- compatible: "keymile,bfticu" +- interrupt-controller: the bfticu FPGA is an interrupt controller +- interrupts: the main IRQ line to signal the collected IRQs +- #interrupt-cells : is 2 and their usage is compliant to the 2 cells variant + of Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +- interrupt-parent: the parent IRQ ctrl the main IRQ is connected to +- reg: access on the parent local bus (chip select, offset in chip select, size) + +Example: + + chassis-mgmt@3,0 { + compatible = "keymile,bfticu"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <3 0 0x100>; + interrupt-parent = <&mpic>; + interrupts = <6 1 0 0>; + }; diff --git a/Documentation/devicetree/bindings/mfd/qriox.txt b/Documentation/devicetree/bindings/mfd/qriox.txt new file mode 100644 index 000000000000..f301e2d4ce76 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qriox.txt @@ -0,0 +1,17 @@ +KEYMILE qrio Board Control CPLD + +The qrio is a multifunction device that controls the KEYMILE boards based on +the kmp204x design. +It is consists of a reset controller, watchdog timer, LEDs, and 2 IRQ capable +GPIO blocks. + +Required properties: +- compatible: "keymile,qriox" +- reg: access on the parent local bus (chip select, offset in chip select, size) + +Example: + + board-control@1,0 { + compatible = "keymile,qriox"; + reg = <1 0 0x80>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt new file mode 100644 index 000000000000..db939210e29d --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt @@ -0,0 +1,54 @@ + +IBM Akebono board device tree +============================= + +The IBM Akebono board is a development board for the PPC476GTR SoC. + +0) The root node + + Required properties: + + - model : "ibm,akebono". + - compatible : "ibm,akebono" , "ibm,476gtr". + +1.a) The Secure Digital Host Controller Interface (SDHCI) node + + Represent the Secure Digital Host Controller Interfaces. + + Required properties: + + - compatible : should be "ibm,476gtr-sdhci","generic-sdhci". + - reg : should contain the SDHCI registers location and length. + - interrupt-parent : a phandle for the interrupt controller. + - interrupts : should contain the SDHCI interrupt. + +1.b) The Advanced Host Controller Interface (AHCI) SATA node + + Represents the advanced host controller SATA interface. + + Required properties: + + - compatible : should be "ibm,476gtr-ahci". + - reg : should contain the AHCI registers location and length. + - interrupt-parent : a phandle for the interrupt controller. + - interrupts : should contain the AHCI interrupt. + +1.c) The FPGA node + + The Akebono board stores some board information such as the revision + number in an FPGA which is represented by this node. + + Required properties: + + - compatible : should be "ibm,akebono-fpga". + - reg : should contain the FPGA registers location and length. + +1.d) The AVR node + + The Akebono board has an Atmel AVR microprocessor attached to the I2C + bus as a power controller for the board. + + Required properties: + + - compatible : should be "ibm,akebono-avr". + - reg : should contain the I2C bus address for the AVR. diff --git a/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt new file mode 100644 index 000000000000..c737c8338705 --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt @@ -0,0 +1,19 @@ + +ppc476gtr High Speed Serial Assist (HSTA) node +============================================== + +The 476gtr SoC contains a high speed serial assist module attached +between the plb4 and plb6 system buses to provide high speed data +transfer between memory and system peripherals as well as support for +PCI message signalled interrupts. + +Currently only the MSI support is used by Linux using the following +device tree entries: + +Require properties: +- compatible : "ibm,476gtr-hsta-msi", "ibm,hsta-msi" +- reg : register mapping for the HSTA MSI space +- interrupt-parent : parent controller for mapping interrupts +- interrupts : ordered interrupt mapping for each MSI in the register + space. The first interrupt should be associated with a + register offset of 0x00, the second to 0x10, etc. diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt index 380914e965e0..700dec4774fa 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt @@ -67,3 +67,20 @@ Example: gpio-controller; }; }; + +* Freescale on-board FPGA connected on I2C bus + +Some Freescale boards like BSC9132QDS have on board FPGA connected on +the i2c bus. + +Required properties: +- compatible: Should be a board-specific string followed by a string + indicating the type of FPGA. Example: + "fsl,<board>-fpga", "fsl,fpga-qixis-i2c" +- reg: Should contain the address of the FPGA + +Example: + fpga: fpga@66 { + compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c"; + reg = <0x66>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt b/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt new file mode 100644 index 000000000000..454da7e08acd --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt @@ -0,0 +1,46 @@ +Freescale CoreNet Coherency Fabric(CCF) Device Tree Binding + +DESCRIPTION + +The CoreNet coherency fabric is a fabric-oriented, connectivity infrastructure +that enables the implementation of coherent, multicore systems. + +Required properties: + +- compatible: <string list> + fsl,corenet1-cf - CoreNet coherency fabric version 1. + Example chips: T4240, B4860 + + fsl,corenet2-cf - CoreNet coherency fabric version 2. + Example chips: P5040, P5020, P4080, P3041, P2041 + + fsl,corenet-cf - Used to represent the common registers + between CCF version 1 and CCF version 2. This compatible + is retained for compatibility reasons, as it was already + used for both CCF version 1 chips and CCF version 2 + chips. It should be specified after either + "fsl,corenet1-cf" or "fsl,corenet2-cf". + +- reg: <prop-encoded-array> + A standard property. Represents the CCF registers. + +- interrupts: <prop-encoded-array> + Interrupt mapping for CCF error interrupt. + +- fsl,ccf-num-csdids: <u32> + Specifies the number of Coherency Subdomain ID Port Mapping + Registers that are supported by the CCF. + +- fsl,ccf-num-snoopids: <u32> + Specifies the number of Snoop ID Port Mapping Registers that + are supported by CCF. + +Example: + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt index 922c30ad90d1..f8cd2397aa04 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt @@ -20,3 +20,14 @@ PROPERTIES a property named fsl,eref-[CAT], where [CAT] is the abbreviated category name with all uppercase letters converted to lowercase, indicates that the category is supported by the implementation. + + - fsl,portid-mapping + Usage: optional + Value type: <u32> + Definition: The Coherency Subdomain ID Port Mapping Registers and + Snoop ID Port Mapping registers, which are part of the CoreNet + Coherency fabric (CCF), provide a CoreNet Coherency Subdomain + ID/CoreNet Snoop ID to cpu mapping functions. Certain bits from + these registers should be set if the coresponding CPU should be + snooped. This property defines a bitmask which selects the bit + that should be set if this cpu should be snooped. diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt index 1f5e329f756c..c2b2899885f2 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt @@ -34,6 +34,15 @@ Optional properties: for legacy drivers. - interrupt-parent : <phandle> Phandle to interrupt controller +- fsl,portid-mapping : <u32> + The Coherency Subdomain ID Port Mapping Registers and + Snoop ID Port Mapping registers, which are part of the + CoreNet Coherency fabric (CCF), provide a CoreNet + Coherency Subdomain ID/CoreNet Snoop ID to pamu mapping + functions. Certain bits from these registers should be + set if PAMUs should be snooped. This property defines + a bitmask which selects the bits that should be set if + PAMUs should be snooped. Child nodes: @@ -88,6 +97,7 @@ Example: compatible = "fsl,pamu-v1.0", "fsl,pamu"; reg = <0x20000 0x5000>; ranges = <0 0x20000 0x5000>; + fsl,portid-mapping = <0xf80000>; #address-cells = <1>; #size-cells = <1>; interrupts = < diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 5261271046ce..4d7f3758d1b4 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -142,3 +142,4 @@ wm Wondermedia Technologies, Inc. xes Extreme Engineering Solutions (X-ES) xlnx Xilinx zyxel ZyXEL Communications Corp. +zarlink Zarlink Semiconductor diff --git a/Documentation/powerpc/cpu_families.txt b/Documentation/powerpc/cpu_families.txt new file mode 100644 index 000000000000..fc08e22feb1a --- /dev/null +++ b/Documentation/powerpc/cpu_families.txt @@ -0,0 +1,221 @@ +CPU Families +============ + +This document tries to summarise some of the different cpu families that exist +and are supported by arch/powerpc. + + +Book3S (aka sPAPR) +------------------ + + - Hash MMU + - Mix of 32 & 64 bit + + +--------------+ +----------------+ + | Old POWER | --------------> | RS64 (threads) | + +--------------+ +----------------+ + | + | + v + +--------------+ +----------------+ +------+ + | 601 | --------------> | 603 | ---> | e300 | + +--------------+ +----------------+ +------+ + | | + | | + v v + +--------------+ +----------------+ +-------+ + | 604 | | 750 (G3) | ---> | 750CX | + +--------------+ +----------------+ +-------+ + | | | + | | | + v v v + +--------------+ +----------------+ +-------+ + | 620 (64 bit) | | 7400 | | 750CL | + +--------------+ +----------------+ +-------+ + | | | + | | | + v v v + +--------------+ +----------------+ +-------+ + | POWER3/630 | | 7410 | | 750FX | + +--------------+ +----------------+ +-------+ + | | + | | + v v + +--------------+ +----------------+ + | POWER3+ | | 7450 | + +--------------+ +----------------+ + | | + | | + v v + +--------------+ +----------------+ + | POWER4 | | 7455 | + +--------------+ +----------------+ + | | + | | + v v + +--------------+ +-------+ +----------------+ + | POWER4+ | --> | 970 | | 7447 | + +--------------+ +-------+ +----------------+ + | | | + | | | + v v v + +--------------+ +-------+ +----------------+ + | POWER5 | | 970FX | | 7448 | + +--------------+ +-------+ +----------------+ + | | | + | | | + v v v + +--------------+ +-------+ +----------------+ + | POWER5+ | | 970MP | | e600 | + +--------------+ +-------+ +----------------+ + | + | + v + +--------------+ + | POWER5++ | + +--------------+ + | + | + v + +--------------+ +-------+ + | POWER6 | <-?-> | Cell | + +--------------+ +-------+ + | + | + v + +--------------+ + | POWER7 | + +--------------+ + | + | + v + +--------------+ + | POWER7+ | + +--------------+ + | + | + v + +--------------+ + | POWER8 | + +--------------+ + + + +---------------+ + | PA6T (64 bit) | + +---------------+ + + +IBM BookE +--------- + + - Software loaded TLB. + - All 32 bit + + +--------------+ + | 401 | + +--------------+ + | + | + v + +--------------+ + | 403 | + +--------------+ + | + | + v + +--------------+ + | 405 | + +--------------+ + | + | + v + +--------------+ + | 440 | + +--------------+ + | + | + v + +--------------+ +----------------+ + | 450 | --> | BG/P | + +--------------+ +----------------+ + | + | + v + +--------------+ + | 460 | + +--------------+ + | + | + v + +--------------+ + | 476 | + +--------------+ + + +Motorola/Freescale 8xx +---------------------- + + - Software loaded with hardware assist. + - All 32 bit + + +-------------+ + | MPC8xx Core | + +-------------+ + + +Freescale BookE +--------------- + + - Software loaded TLB. + - e6500 adds HW loaded indirect TLB entries. + - Mix of 32 & 64 bit + + +--------------+ + | e200 | + +--------------+ + + + +--------------------------------+ + | e500 | + +--------------------------------+ + | + | + v + +--------------------------------+ + | e500v2 | + +--------------------------------+ + | + | + v + +--------------------------------+ + | e500mc (Book3e) | + +--------------------------------+ + | + | + v + +--------------------------------+ + | e5500 (64 bit) | + +--------------------------------+ + | + | + v + +--------------------------------+ + | e6500 (HW TLB) (Multithreaded) | + +--------------------------------+ + + +IBM A2 core +----------- + + - Book3E, software loaded TLB + HW loaded indirect TLB entries. + - 64 bit + + +--------------+ +----------------+ + | A2 core | --> | WSP | + +--------------+ +----------------+ + | + | + v + +--------------+ + | BG/Q | + +--------------+ diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index e0998997943b..bd6dd6ed3a9f 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -453,6 +453,14 @@ config NODES_SHIFT default "4" depends on NEED_MULTIPLE_NODES +config USE_PERCPU_NUMA_NODE_ID + def_bool y + depends on NUMA + +config HAVE_MEMORYLESS_NODES + def_bool y + depends on NUMA + config ARCH_SELECT_MEMORY_MODEL def_bool y depends on PPC64 diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index ce4c68a4a823..5687e299d0a5 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -113,8 +113,13 @@ else endif endif -CFLAGS-$(CONFIG_PPC64) := -mtraceback=no -mcall-aixdesc -CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv1) +CFLAGS-$(CONFIG_PPC64) := -mtraceback=no +ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y) +CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2,-mcall-aixdesc) +AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2) +else +CFLAGS-$(CONFIG_PPC64) += -mcall-aixdesc +endif CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcmodel=medium,-mminimal-toc) CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions) CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 $(MULTIPLEWORD) @@ -153,7 +158,7 @@ CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell) asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1) KBUILD_CPPFLAGS += -Iarch/$(ARCH) $(asinstr) -KBUILD_AFLAGS += -Iarch/$(ARCH) +KBUILD_AFLAGS += -Iarch/$(ARCH) $(AFLAGS-y) KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y) CPP = $(CC) -E $(KBUILD_CFLAGS) @@ -161,6 +166,11 @@ CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE) KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o +ifeq ($(CONFIG_476FPE_ERR46),y) + KBUILD_LDFLAGS_MODULE += --ppc476-workaround \ + -T $(srctree)/arch/powerpc/platforms/44x/ppc476_modules.lds +endif + # No AltiVec or VSX instructions when building kernel KBUILD_CFLAGS += $(call cc-option,-mno-altivec) KBUILD_CFLAGS += $(call cc-option,-mno-vsx) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index a1f8c7f1ec60..426dce7ae7c4 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -22,8 +22,14 @@ all: $(obj)/zImage BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -fno-strict-aliasing -Os -msoft-float -pipe \ -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ - -isystem $(shell $(CROSS32CC) -print-file-name=include) \ - -mbig-endian + -isystem $(shell $(CROSS32CC) -print-file-name=include) +ifdef CONFIG_PPC64_BOOT_WRAPPER +BOOTCFLAGS += -m64 +endif +ifdef CONFIG_CPU_BIG_ENDIAN +BOOTCFLAGS += -mbig-endian +endif + BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc ifdef CONFIG_DEBUG_INFO @@ -47,6 +53,7 @@ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 +$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 @@ -86,6 +93,7 @@ src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ cuboot-taishan.c cuboot-katmai.c \ cuboot-warp.c cuboot-yosemite.c \ treeboot-iss4xx.c treeboot-currituck.c \ + treeboot-akebono.c \ simpleboot.c fixed-head.S virtex.c src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c @@ -99,6 +107,11 @@ src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \ src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c +src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S +src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S +src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S +src-plat-$(CONFIG_PPC_CELLEB) += pseries-head.S +src-plat-$(CONFIG_PPC_CELL_QPACE) += pseries-head.S src-wlib := $(sort $(src-wlib-y)) src-plat := $(sort $(src-plat-y)) @@ -137,7 +150,11 @@ $(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc $(obj)/empty.c: @touch $@ -$(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srctree)/$(src)/%.S +$(obj)/zImage.lds: $(obj)/%: $(srctree)/$(src)/%.S + $(CROSS32CC) $(cpp_flags) -E -Wp,-MD,$(depfile) -P -Upowerpc \ + -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $< + +$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S @cp $< $@ clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \ @@ -235,6 +252,7 @@ image-$(CONFIG_YOSEMITE) += cuImage.yosemite image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ treeImage.iss4xx-mpic image-$(CONFIG_CURRITUCK) += treeImage.currituck +image-$(CONFIG_AKEBONO) += treeImage.akebono # Board ports in arch/powerpc/platform/8xx/Kconfig image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c index 349b5530d2c4..9d9f6f334d3c 100644 --- a/arch/powerpc/boot/addnote.c +++ b/arch/powerpc/boot/addnote.c @@ -6,6 +6,8 @@ * * Copyright 2000 Paul Mackerras. * + * Adapted for 64 bit little endian images by Andrew Tauferner. + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -55,36 +57,61 @@ unsigned int rpanote[N_RPA_DESCR] = { #define ROUNDUP(len) (((len) + 3) & ~3) -unsigned char buf[512]; +unsigned char buf[1024]; +#define ELFDATA2LSB 1 +#define ELFDATA2MSB 2 +static int e_data = ELFDATA2MSB; +#define ELFCLASS32 1 +#define ELFCLASS64 2 +static int e_class = ELFCLASS32; #define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1])) -#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2)) - -#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \ - buf[(off) + 1] = (v) & 0xff) -#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \ - PUT_16BE((off) + 2, (v))) +#define GET_32BE(off) ((GET_16BE(off) << 16U) + GET_16BE((off)+2U)) +#define GET_64BE(off) ((((unsigned long long)GET_32BE(off)) << 32ULL) + \ + ((unsigned long long)GET_32BE((off)+4ULL))) +#define PUT_16BE(off, v)(buf[off] = ((v) >> 8) & 0xff, \ + buf[(off) + 1] = (v) & 0xff) +#define PUT_32BE(off, v)(PUT_16BE((off), (v) >> 16L), PUT_16BE((off) + 2, (v))) +#define PUT_64BE(off, v)((PUT_32BE((off), (v) >> 32L), \ + PUT_32BE((off) + 4, (v)))) + +#define GET_16LE(off) ((buf[off]) + (buf[(off)+1] << 8)) +#define GET_32LE(off) (GET_16LE(off) + (GET_16LE((off)+2U) << 16U)) +#define GET_64LE(off) ((unsigned long long)GET_32LE(off) + \ + (((unsigned long long)GET_32LE((off)+4ULL)) << 32ULL)) +#define PUT_16LE(off, v) (buf[off] = (v) & 0xff, \ + buf[(off) + 1] = ((v) >> 8) & 0xff) +#define PUT_32LE(off, v) (PUT_16LE((off), (v)), PUT_16LE((off) + 2, (v) >> 16L)) +#define PUT_64LE(off, v) (PUT_32LE((off), (v)), PUT_32LE((off) + 4, (v) >> 32L)) + +#define GET_16(off) (e_data == ELFDATA2MSB ? GET_16BE(off) : GET_16LE(off)) +#define GET_32(off) (e_data == ELFDATA2MSB ? GET_32BE(off) : GET_32LE(off)) +#define GET_64(off) (e_data == ELFDATA2MSB ? GET_64BE(off) : GET_64LE(off)) +#define PUT_16(off, v) (e_data == ELFDATA2MSB ? PUT_16BE(off, v) : \ + PUT_16LE(off, v)) +#define PUT_32(off, v) (e_data == ELFDATA2MSB ? PUT_32BE(off, v) : \ + PUT_32LE(off, v)) +#define PUT_64(off, v) (e_data == ELFDATA2MSB ? PUT_64BE(off, v) : \ + PUT_64LE(off, v)) /* Structure of an ELF file */ #define E_IDENT 0 /* ELF header */ -#define E_PHOFF 28 -#define E_PHENTSIZE 42 -#define E_PHNUM 44 -#define E_HSIZE 52 /* size of ELF header */ +#define E_PHOFF (e_class == ELFCLASS32 ? 28 : 32) +#define E_PHENTSIZE (e_class == ELFCLASS32 ? 42 : 54) +#define E_PHNUM (e_class == ELFCLASS32 ? 44 : 56) +#define E_HSIZE (e_class == ELFCLASS32 ? 52 : 64) #define EI_MAGIC 0 /* offsets in E_IDENT area */ #define EI_CLASS 4 #define EI_DATA 5 #define PH_TYPE 0 /* ELF program header */ -#define PH_OFFSET 4 -#define PH_FILESZ 16 -#define PH_HSIZE 32 /* size of program header */ +#define PH_OFFSET (e_class == ELFCLASS32 ? 4 : 8) +#define PH_FILESZ (e_class == ELFCLASS32 ? 16 : 32) +#define PH_HSIZE (e_class == ELFCLASS32 ? 32 : 56) #define PT_NOTE 4 /* Program header type = note */ -#define ELFCLASS32 1 -#define ELFDATA2MSB 2 unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' }; @@ -92,8 +119,8 @@ int main(int ac, char **av) { int fd, n, i; - int ph, ps, np; - int nnote, nnote2, ns; + unsigned long ph, ps, np; + long nnote, nnote2, ns; if (ac != 2) { fprintf(stderr, "Usage: %s elf-file\n", av[0]); @@ -114,26 +141,27 @@ main(int ac, char **av) exit(1); } - if (n < E_HSIZE || memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0) + if (memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0) + goto notelf; + e_class = buf[E_IDENT+EI_CLASS]; + if (e_class != ELFCLASS32 && e_class != ELFCLASS64) + goto notelf; + e_data = buf[E_IDENT+EI_DATA]; + if (e_data != ELFDATA2MSB && e_data != ELFDATA2LSB) + goto notelf; + if (n < E_HSIZE) goto notelf; - if (buf[E_IDENT+EI_CLASS] != ELFCLASS32 - || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) { - fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", - av[1]); - exit(1); - } - - ph = GET_32BE(E_PHOFF); - ps = GET_16BE(E_PHENTSIZE); - np = GET_16BE(E_PHNUM); + ph = (e_class == ELFCLASS32 ? GET_32(E_PHOFF) : GET_64(E_PHOFF)); + ps = GET_16(E_PHENTSIZE); + np = GET_16(E_PHNUM); if (ph < E_HSIZE || ps < PH_HSIZE || np < 1) goto notelf; if (ph + (np + 2) * ps + nnote + nnote2 > n) goto nospace; for (i = 0; i < np; ++i) { - if (GET_32BE(ph + PH_TYPE) == PT_NOTE) { + if (GET_32(ph + PH_TYPE) == PT_NOTE) { fprintf(stderr, "%s already has a note entry\n", av[1]); exit(0); @@ -148,15 +176,22 @@ main(int ac, char **av) /* fill in the program header entry */ ns = ph + 2 * ps; - PUT_32BE(ph + PH_TYPE, PT_NOTE); - PUT_32BE(ph + PH_OFFSET, ns); - PUT_32BE(ph + PH_FILESZ, nnote); + PUT_32(ph + PH_TYPE, PT_NOTE); + if (e_class == ELFCLASS32) + PUT_32(ph + PH_OFFSET, ns); + else + PUT_64(ph + PH_OFFSET, ns); + + if (e_class == ELFCLASS32) + PUT_32(ph + PH_FILESZ, nnote); + else + PUT_64(ph + PH_FILESZ, nnote); /* fill in the note area we point to */ /* XXX we should probably make this a proper section */ - PUT_32BE(ns, strlen(arch) + 1); - PUT_32BE(ns + 4, N_DESCR * 4); - PUT_32BE(ns + 8, 0x1275); + PUT_32(ns, strlen(arch) + 1); + PUT_32(ns + 4, N_DESCR * 4); + PUT_32(ns + 8, 0x1275); strcpy((char *) &buf[ns + 12], arch); ns += 12 + strlen(arch) + 1; for (i = 0; i < N_DESCR; ++i, ns += 4) @@ -164,21 +199,28 @@ main(int ac, char **av) /* fill in the second program header entry and the RPA note area */ ph += ps; - PUT_32BE(ph + PH_TYPE, PT_NOTE); - PUT_32BE(ph + PH_OFFSET, ns); - PUT_32BE(ph + PH_FILESZ, nnote2); + PUT_32(ph + PH_TYPE, PT_NOTE); + if (e_class == ELFCLASS32) + PUT_32(ph + PH_OFFSET, ns); + else + PUT_64(ph + PH_OFFSET, ns); + + if (e_class == ELFCLASS32) + PUT_32(ph + PH_FILESZ, nnote); + else + PUT_64(ph + PH_FILESZ, nnote2); /* fill in the note area we point to */ - PUT_32BE(ns, strlen(rpaname) + 1); - PUT_32BE(ns + 4, sizeof(rpanote)); - PUT_32BE(ns + 8, 0x12759999); + PUT_32(ns, strlen(rpaname) + 1); + PUT_32(ns + 4, sizeof(rpanote)); + PUT_32(ns + 8, 0x12759999); strcpy((char *) &buf[ns + 12], rpaname); ns += 12 + ROUNDUP(strlen(rpaname) + 1); for (i = 0; i < N_RPA_DESCR; ++i, ns += 4) PUT_32BE(ns, rpanote[i]); /* Update the number of program headers */ - PUT_16BE(E_PHNUM, np + 2); + PUT_16(E_PHNUM, np + 2); /* write back */ lseek(fd, (long) 0, SEEK_SET); diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S index 0f7428a37efb..14de4f8778a7 100644 --- a/arch/powerpc/boot/crt0.S +++ b/arch/powerpc/boot/crt0.S @@ -1,17 +1,20 @@ /* * Copyright (C) Paul Mackerras 1997. * + * Adapted for 64 bit LE PowerPC by Andrew Tauferner + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * NOTE: this code runs in 32 bit mode, is position-independent, - * and is packaged as ELF32. */ #include "ppc_asm.h" +RELA = 7 +RELACOUNT = 0x6ffffff9 + .text /* A procedure descriptor used when booting this as a COFF file. * When making COFF, this comes first in the link and we're @@ -21,6 +24,20 @@ _zimage_start_opd: .long 0x500000, 0, 0, 0 +#ifdef __powerpc64__ +.balign 8 +p_start: .llong _start +p_etext: .llong _etext +p_bss_start: .llong __bss_start +p_end: .llong _end + +p_toc: .llong __toc_start + 0x8000 - p_base +p_dyn: .llong __dynamic_start - p_base +p_rela: .llong __rela_dyn_start - p_base +p_prom: .llong 0 + .weak _platform_stack_top +p_pstack: .llong _platform_stack_top +#else p_start: .long _start p_etext: .long _etext p_bss_start: .long __bss_start @@ -28,6 +45,7 @@ p_end: .long _end .weak _platform_stack_top p_pstack: .long _platform_stack_top +#endif .weak _zimage_start .globl _zimage_start @@ -38,6 +56,7 @@ _zimage_start_lib: and the address where we're running. */ bl .+4 p_base: mflr r10 /* r10 now points to runtime addr of p_base */ +#ifndef __powerpc64__ /* grab the link address of the dynamic section in r11 */ addis r11,r10,(_GLOBAL_OFFSET_TABLE_-p_base)@ha lwz r11,(_GLOBAL_OFFSET_TABLE_-p_base)@l(r11) @@ -51,8 +70,6 @@ p_base: mflr r10 /* r10 now points to runtime addr of p_base */ /* The dynamic section contains a series of tagged entries. * We need the RELA and RELACOUNT entries. */ -RELA = 7 -RELACOUNT = 0x6ffffff9 li r9,0 li r0,0 9: lwz r8,0(r12) /* get tag */ @@ -120,9 +137,164 @@ RELACOUNT = 0x6ffffff9 li r0,0 stwu r0,-16(r1) /* establish a stack frame */ 6: +#else /* __powerpc64__ */ + /* Save the prom pointer at p_prom. */ + std r5,(p_prom-p_base)(r10) + + /* Set r2 to the TOC. */ + ld r2,(p_toc-p_base)(r10) + add r2,r2,r10 + + /* Grab the link address of the dynamic section in r11. */ + ld r11,-32768(r2) + cmpwi r11,0 + beq 3f /* if not linked -pie then no dynamic section */ + + ld r11,(p_dyn-p_base)(r10) + add r11,r11,r10 + ld r9,(p_rela-p_base)(r10) + add r9,r9,r10 + li r7,0 + li r8,0 +9: ld r6,0(r11) /* get tag */ + cmpdi r6,0 + beq 12f /* end of list */ + cmpdi r6,RELA + bne 10f + ld r7,8(r11) /* get RELA pointer in r7 */ + b 11f +10: addis r6,r6,(-RELACOUNT)@ha + cmpdi r6,RELACOUNT@l + bne 11f + ld r8,8(r11) /* get RELACOUNT value in r8 */ +11: addi r11,r11,16 + b 9b +12: + cmpdi r7,0 /* check we have both RELA and RELACOUNT */ + cmpdi cr1,r8,0 + beq 3f + beq cr1,3f + + /* Calcuate the runtime offset. */ + subf r7,r7,r9 + + /* Run through the list of relocations and process the + * R_PPC64_RELATIVE ones. */ + mtctr r8 +13: ld r0,8(r9) /* ELF64_R_TYPE(reloc->r_info) */ + cmpdi r0,22 /* R_PPC64_RELATIVE */ + bne 3f + ld r6,0(r9) /* reloc->r_offset */ + ld r0,16(r9) /* reloc->r_addend */ + add r0,r0,r7 + stdx r0,r7,r6 + addi r9,r9,24 + bdnz 13b + + /* Do a cache flush for our text, in case the loader didn't */ +3: ld r9,p_start-p_base(r10) /* note: these are relocated now */ + ld r8,p_etext-p_base(r10) +4: dcbf r0,r9 + icbi r0,r9 + addi r9,r9,0x20 + cmpld cr0,r9,r8 + blt 4b + sync + isync + + /* Clear the BSS */ + ld r9,p_bss_start-p_base(r10) + ld r8,p_end-p_base(r10) + li r0,0 +5: std r0,0(r9) + addi r9,r9,8 + cmpld cr0,r9,r8 + blt 5b + + /* Possibly set up a custom stack */ + ld r8,p_pstack-p_base(r10) + cmpdi r8,0 + beq 6f + ld r1,0(r8) + li r0,0 + stdu r0,-16(r1) /* establish a stack frame */ +6: +#endif /* __powerpc64__ */ /* Call platform_init() */ bl platform_init /* Call start */ b start + +#ifdef __powerpc64__ + +#define PROM_FRAME_SIZE 512 +#define SAVE_GPR(n, base) std n,8*(n)(base) +#define REST_GPR(n, base) ld n,8*(n)(base) +#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base) +#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base) +#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base) +#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base) +#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base) +#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base) +#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base) +#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base) + +/* prom handles the jump into and return from firmware. The prom args pointer + is loaded in r3. */ +.globl prom +prom: + mflr r0 + std r0,16(r1) + stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */ + + SAVE_GPR(2, r1) + SAVE_GPR(13, r1) + SAVE_8GPRS(14, r1) + SAVE_10GPRS(22, r1) + mfcr r10 + std r10,8*32(r1) + mfmsr r10 + std r10,8*33(r1) + + /* remove MSR_LE from msr but keep MSR_SF */ + mfmsr r10 + rldicr r10,r10,0,62 + mtsrr1 r10 + + /* Load FW address, set LR to label 1, and jump to FW */ + bl 0f +0: mflr r10 + addi r11,r10,(1f-0b) + mtlr r11 + + ld r10,(p_prom-0b)(r10) + mtsrr0 r10 + + rfid + +1: /* Return from OF */ + FIXUP_ENDIAN + + /* Restore registers and return. */ + rldicl r1,r1,0,32 + + /* Restore the MSR (back to 64 bits) */ + ld r10,8*(33)(r1) + mtmsr r10 + isync + + /* Restore other registers */ + REST_GPR(2, r1) + REST_GPR(13, r1) + REST_8GPRS(14, r1) + REST_10GPRS(22, r1) + ld r10,8*32(r1) + mtcr r10 + + addi r1,r1,PROM_FRAME_SIZE + ld r0,16(r1) + mtlr r0 + blr +#endif diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index cc73f7a95e26..bf8f4ede1928 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -15,6 +15,10 @@ asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \ rval; \ }) +#define mtdcrx(rn, val) \ + ({ \ + asm volatile("mtdcrx %0,%1" : : "r"(rn), "r" (val)); \ + }) /* 440GP/440GX SDRAM controller DCRs */ #define DCRN_SDRAM0_CFGADDR 0x010 diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts new file mode 100644 index 000000000000..f92ecfed3d2f --- /dev/null +++ b/arch/powerpc/boot/dts/akebono.dts @@ -0,0 +1,415 @@ +/* + * Device Tree Source for IBM Embedded PPC 476 Platform + * + * Copyright © 2013 Tony Breeds IBM Corporation + * Copyright © 2013 Alistair Popple IBM Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/memreserve/ 0x01f00000 0x00100000; // spin table + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "ibm,akebono"; + compatible = "ibm,akebono", "ibm,476gtr"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <0>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "ok"; + }; + cpu@1 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <1>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x01f00000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // filled in by zImage + }; + + MPIC: interrupt-controller { + compatible = "chrp,open-pic"; + interrupt-controller; + dcr-reg = <0xffc00000 0x00040000>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + single-cpu-affinity; + }; + + plb { + compatible = "ibm,plb6"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-frequency = <200000000>; // 200Mhz + + HSTA0: hsta@310000e0000 { + compatible = "ibm,476gtr-hsta-msi", "ibm,hsta-msi"; + reg = <0x310 0x000e0000 0x0 0xf0>; + interrupt-parent = <&MPIC>; + interrupts = <108 0 + 109 0 + 110 0 + 111 0 + 112 0 + 113 0 + 114 0 + 115 0 + 116 0 + 117 0 + 118 0 + 119 0 + 120 0 + 121 0 + 122 0 + 123 0>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-476gtr", "ibm,mcmal2"; + dcr-reg = <0xc0000000 0x062>; + num-tx-chans = <1>; + num-rx-chans = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&MPIC>; + interrupts = < /*TXEOB*/ 77 0x4 + /*RXEOB*/ 78 0x4 + /*SERR*/ 76 0x4 + /*TXDE*/ 79 0x4 + /*RXDE*/ 80 0x4>; + }; + + SATA0: sata@30000010000 { + compatible = "ibm,476gtr-ahci"; + reg = <0x300 0x00010000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <93 2>; + }; + + EHCI0: ehci@30010000000 { + compatible = "ibm,476gtr-ehci", "generic-ehci"; + reg = <0x300 0x10000000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <85 2>; + }; + + SD0: sd@30000000000 { + compatible = "ibm,476gtr-sdhci", "generic-sdhci"; + reg = <0x300 0x00000000 0x0 0x10000>; + interrupts = <91 2>; + interrupt-parent = <&MPIC>; + }; + + OHCI0: ohci@30010010000 { + compatible = "ibm,476gtr-ohci", "generic-ohci"; + reg = <0x300 0x10010000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <89 1>; + }; + + OHCI1: ohci@30010020000 { + compatible = "ibm,476gtr-ohci", "generic-ohci"; + reg = <0x300 0x10020000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <88 1>; + }; + + POB0: opb { + compatible = "ibm,opb-4xx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full + * 32-bit range + */ + ranges = <0x00000000 0x0000033f 0x00000000 0x80000000 + 0x80000000 0x0000033f 0x80000000 0x80000000>; + clock-frequency = <100000000>; + + RGMII0: emac-rgmii-wol@50004 { + compatible = "ibm,rgmii-wol-476gtr", "ibm,rgmii-wol"; + reg = <0x50004 0x00000008>; + has-mdio; + }; + + EMAC0: ethernet@30000 { + device_type = "network"; + compatible = "ibm,emac-476gtr", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &MPIC 81 0x4 + /*Wake*/ 0x1 &MPIC 82 0x4>; + reg = <0x30000 0x78>; + + /* local-mac-address will normally be added by + * the wrapper. If your device doesn't support + * passing data to the wrapper (in the form + * local-mac-addr=<hwaddr>) then you will need + * to set it manually here. */ + //local-mac-address = [000000000000]; + + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-wol-device = <&RGMII0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + UART0: serial@10000 { + device_type = "serial"; + compatible = "ns16750", "ns16550"; + reg = <0x10000 0x00000008>; + virtual-reg = <0xe8010000>; + clock-frequency = <1851851>; + current-speed = <38400>; + interrupt-parent = <&MPIC>; + interrupts = <39 2>; + }; + + IIC0: i2c@00000000 { + compatible = "ibm,iic-476gtr", "ibm,iic"; + reg = <0x0 0x00000020>; + interrupt-parent = <&MPIC>; + interrupts = <37 2>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80", "m41st85"; + reg = <0x68>; + }; + }; + + IIC1: i2c@00000100 { + compatible = "ibm,iic-476gtr", "ibm,iic"; + reg = <0x100 0x00000020>; + interrupt-parent = <&MPIC>; + interrupts = <38 2>; + #address-cells = <1>; + #size-cells = <0>; + avr@58 { + compatible = "ibm,akebono-avr"; + reg = <0x58>; + }; + }; + + FPGA0: fpga@ebc00000 { + compatible = "ibm,akebono-fpga"; + reg = <0xebc00000 0x8>; + }; + }; + + PCIE0: pciex@10100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0xc0 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>; + + /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI + * PCI devices must be able to write to the HSTA module. + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 45 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 46 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 47 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>; + }; + + PCIE1: pciex@20100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x00000201 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000200 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x100 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000210 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000240 0x0 0x0 0x00010000>; + + /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI + * PCI devices must be able to write to the HSTA module. + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 53 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 54 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 55 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>; + }; + + PCIE2: pciex@18100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x00000181 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000180 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0xe0 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000190 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x000001c0 0x0 0x0 0x00010000>; + + /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI + * PCI devices must be able to write to the HSTA module. + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 61 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 62 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 63 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>; + }; + + PCIE3: pciex@28100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x3>; /* port number */ + reg = <0x00000281 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000280 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x120 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000290 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x000002c0 0x0 0x0 0x00010000>; + + /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI + * PCI devices must be able to write to the HSTA module. + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 69 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 70 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 71 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 72 0x2 /* int D */>; + }; + }; + + chosen { + linux,stdout-path = &UART0; + }; +}; diff --git a/arch/powerpc/boot/dts/b4860emu.dts b/arch/powerpc/boot/dts/b4860emu.dts index 7290021f2dfc..85646b4f96e1 100644 --- a/arch/powerpc/boot/dts/b4860emu.dts +++ b/arch/powerpc/boot/dts/b4860emu.dts @@ -61,21 +61,25 @@ device_type = "cpu"; reg = <0 1>; next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; }; cpu2: PowerPC,e6500@4 { device_type = "cpu"; reg = <4 5>; next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; }; cpu3: PowerPC,e6500@6 { device_type = "cpu"; reg = <6 7>; next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; }; }; }; @@ -157,7 +161,7 @@ }; corenet-cf@18000 { - compatible = "fsl,b4-corenet-cf"; + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; reg = <0x18000 0x1000>; interrupts = <16 2 1 0>; fsl,ccf-num-csdids = <32>; @@ -167,6 +171,7 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; reg = <0x20000 0x4000>; + fsl,portid-mapping = <0x8000>; #address-cells = <1>; #size-cells = <1>; interrupts = < diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts b/arch/powerpc/boot/dts/bsc9132qds.dts new file mode 100644 index 000000000000..6cab1062bc74 --- /dev/null +++ b/arch/powerpc/boot/dts/bsc9132qds.dts @@ -0,0 +1,35 @@ +/* + * BSC9132 QDS Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/bsc9132si-pre.dtsi" + +/ { + model = "fsl,bsc9132qds"; + compatible = "fsl,bsc9132qds"; + + memory { + device_type = "memory"; + }; + + ifc: ifc@ff71e000 { + /* NOR, NAND Flash on board */ + ranges = <0x0 0x0 0x0 0x88000000 0x08000000 + 0x1 0x0 0x0 0xff800000 0x00010000>; + reg = <0x0 0xff71e000 0x0 0x2000>; + }; + + soc: soc@ff700000 { + ranges = <0x0 0x0 0xff700000 0x100000>; + }; +}; + +/include/ "bsc9132qds.dtsi" +/include/ "fsl/bsc9132si-post.dtsi" diff --git a/arch/powerpc/boot/dts/bsc9132qds.dtsi b/arch/powerpc/boot/dts/bsc9132qds.dtsi new file mode 100644 index 000000000000..af8e88830221 --- /dev/null +++ b/arch/powerpc/boot/dts/bsc9132qds.dtsi @@ -0,0 +1,101 @@ +/* + * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x4000>; + }; +}; + +&soc { + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <30000000>; + }; + }; + + i2c@3000 { + fpga: fpga@66 { + compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c"; + reg = <0x66>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x1f>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi index 60566f9927be..d67894459ac8 100644 --- a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi @@ -76,10 +76,6 @@ compatible = "fsl,b4420-l3-cache-controller", "cache"; }; - corenet-cf@18000 { - compatible = "fsl,b4420-corenet-cf"; - }; - guts: global-utilities@e0000 { compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0"; }; diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi index 2419731c2c54..338af7e39dd9 100644 --- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi @@ -66,12 +66,14 @@ reg = <0 1>; clocks = <&mux0>; next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; clocks = <&mux0>; next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi index cbc354b05117..582381dba1d7 100644 --- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi @@ -120,10 +120,6 @@ compatible = "fsl,b4860-l3-cache-controller", "cache"; }; - corenet-cf@18000 { - compatible = "fsl,b4860-corenet-cf"; - }; - guts: global-utilities@e0000 { compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0"; }; diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi index 142ac862cacf..1948f73fd26b 100644 --- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi @@ -66,24 +66,28 @@ reg = <0 1>; clocks = <&mux0>; next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; clocks = <&mux0>; next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; }; cpu2: PowerPC,e6500@4 { device_type = "cpu"; reg = <4 5>; clocks = <&mux0>; next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; }; cpu3: PowerPC,e6500@6 { device_type = "cpu"; reg = <6 7>; clocks = <&mux0>; next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi index 4f6e48277c46..1a54ba71f685 100644 --- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi @@ -158,7 +158,7 @@ }; corenet-cf@18000 { - compatible = "fsl,b4-corenet-cf"; + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; reg = <0x18000 0x1000>; interrupts = <16 2 1 0>; fsl,ccf-num-csdids = <32>; @@ -168,6 +168,7 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; reg = <0x20000 0x4000>; + fsl,portid-mapping = <0x8000>; #address-cells = <1>; #size-cells = <1>; interrupts = < diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi new file mode 100644 index 000000000000..c72307198140 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi @@ -0,0 +1,185 @@ +/* + * BSC9132 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + /* FIXME: Test whether interrupts are split */ + interrupts = <16 2 0 0 20 2 0 0>; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,bsc9132-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,bsc9132-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,bsc9132-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 1 8>; + }; + +/include/ "pq3-i2c-0.dtsi" + i2c@3000 { + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-i2c-1.dtsi" + i2c@3100 { + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-duart-0.dtsi" + serial0: serial@4500 { + interrupts = <18 2 0 0>; + }; + + serial1: serial@4600 { + interrupts = <18 2 0 0 >; + }; +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <1>; + interrupts = <22 0x2 0 0>; + }; + +/include/ "pq3-gpio-0.dtsi" + gpio-controller@f000 { + interrupts = <19 0x2 0 0>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,bsc9132-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 1 0>; + }; + +/include/ "pq3-dma-0.dtsi" + +dma@21300 { + + dma-channel@0 { + interrupts = <62 2 0 0>; + }; + + dma-channel@80 { + interrupts = <63 2 0 0>; + }; + + dma-channel@100 { + interrupts = <64 2 0 0>; + }; + + dma-channel@180 { + interrupts = <65 2 0 0>; + }; +}; + +/include/ "pq3-usb2-dr-0.dtsi" +usb@22000 { + compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2"; + interrupts = <40 0x2 0 0>; +}; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + fsl,sdhci-auto-cmd12; + interrupts = <41 0x2 0 0>; + }; + +/include/ "pq3-sec4.4-0.dtsi" +crypto@30000 { + interrupts = <57 2 0 0>; + + sec_jr0: jr@1000 { + interrupts = <58 2 0 0>; + }; + + sec_jr1: jr@2000 { + interrupts = <59 2 0 0>; + }; + + sec_jr2: jr@3000 { + interrupts = <60 2 0 0>; + }; + + sec_jr3: jr@4000 { + interrupts = <61 2 0 0>; + }; +}; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" +enet0: ethernet@b0000 { + queue-group@b0000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>; + }; +}; + +/include/ "pq3-etsec2-1.dtsi" +enet1: ethernet@b1000 { + queue-group@b1000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>; + }; +}; + +global-utilities@e0000 { + compatible = "fsl,bsc9132-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi new file mode 100644 index 000000000000..301a9dba5790 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi @@ -0,0 +1,66 @@ +/* + * BSC9132 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + ethernet0 = &enet0; + ethernet1 = &enet1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500v2@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + cpu1: PowerPC,e500v2@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index e2987a33083c..5290df83ff30 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -246,7 +246,7 @@ }; corenet-cf@18000 { - compatible = "fsl,corenet-cf"; + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; reg = <0x18000 0x1000>; interrupts = <16 2 1 31>; fsl,ccf-num-csdids = <32>; @@ -262,6 +262,7 @@ interrupts = < 24 2 0 0 16 2 1 30>; + fsl,portid-mapping = <0x0f000000>; pamu0: pamu@0 { reg = <0 0x1000>; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi index 22f3b14517de..b1ea147f2995 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi @@ -83,6 +83,7 @@ reg = <0>; clocks = <&mux0>; next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; L2_0: l2-cache { next-level-cache = <&cpc>; }; @@ -92,6 +93,7 @@ reg = <1>; clocks = <&mux1>; next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; L2_1: l2-cache { next-level-cache = <&cpc>; }; @@ -101,6 +103,7 @@ reg = <2>; clocks = <&mux2>; next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x20000000>; L2_2: l2-cache { next-level-cache = <&cpc>; }; @@ -110,6 +113,7 @@ reg = <3>; clocks = <&mux3>; next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x10000000>; L2_3: l2-cache { next-level-cache = <&cpc>; }; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi index 7af6d45fd998..cd63cb1b1042 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -273,7 +273,7 @@ }; corenet-cf@18000 { - compatible = "fsl,corenet-cf"; + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; reg = <0x18000 0x1000>; interrupts = <16 2 1 31>; fsl,ccf-num-csdids = <32>; @@ -289,6 +289,7 @@ interrupts = < 24 2 0 0 16 2 1 30>; + fsl,portid-mapping = <0x0f000000>; pamu0: pamu@0 { reg = <0 0x1000>; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi index 468e8be8ac6f..dc5f4b362c24 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi @@ -84,6 +84,7 @@ reg = <0>; clocks = <&mux0>; next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; L2_0: l2-cache { next-level-cache = <&cpc>; }; @@ -93,6 +94,7 @@ reg = <1>; clocks = <&mux1>; next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; L2_1: l2-cache { next-level-cache = <&cpc>; }; @@ -102,6 +104,7 @@ reg = <2>; clocks = <&mux2>; next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x20000000>; L2_2: l2-cache { next-level-cache = <&cpc>; }; @@ -111,6 +114,7 @@ reg = <3>; clocks = <&mux3>; next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x10000000>; L2_3: l2-cache { next-level-cache = <&cpc>; }; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 2415e1f1d3fa..12947ccddf25 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -281,7 +281,7 @@ }; corenet-cf@18000 { - compatible = "fsl,corenet-cf"; + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; reg = <0x18000 0x1000>; interrupts = <16 2 1 31>; fsl,ccf-num-csdids = <32>; @@ -297,6 +297,7 @@ interrupts = < 24 2 0 0 16 2 1 30>; + fsl,portid-mapping = <0x00f80000>; pamu0: pamu@0 { reg = <0 0x1000>; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi index 0040b5a5379e..38bde0958672 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi @@ -83,6 +83,7 @@ reg = <0>; clocks = <&mux0>; next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; L2_0: l2-cache { next-level-cache = <&cpc>; }; @@ -92,6 +93,7 @@ reg = <1>; clocks = <&mux1>; next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; L2_1: l2-cache { next-level-cache = <&cpc>; }; @@ -101,6 +103,7 @@ reg = <2>; clocks = <&mux2>; next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x20000000>; L2_2: l2-cache { next-level-cache = <&cpc>; }; @@ -110,6 +113,7 @@ reg = <3>; clocks = <&mux3>; next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x10000000>; L2_3: l2-cache { next-level-cache = <&cpc>; }; @@ -119,6 +123,7 @@ reg = <4>; clocks = <&mux4>; next-level-cache = <&L2_4>; + fsl,portid-mapping = <0x08000000>; L2_4: l2-cache { next-level-cache = <&cpc>; }; @@ -128,6 +133,7 @@ reg = <5>; clocks = <&mux5>; next-level-cache = <&L2_5>; + fsl,portid-mapping = <0x04000000>; L2_5: l2-cache { next-level-cache = <&cpc>; }; @@ -137,6 +143,7 @@ reg = <6>; clocks = <&mux6>; next-level-cache = <&L2_6>; + fsl,portid-mapping = <0x02000000>; L2_6: l2-cache { next-level-cache = <&cpc>; }; @@ -146,6 +153,7 @@ reg = <7>; clocks = <&mux7>; next-level-cache = <&L2_7>; + fsl,portid-mapping = <0x01000000>; L2_7: l2-cache { next-level-cache = <&cpc>; }; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index 2985de4ad6be..4c4a2b0436b2 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -278,7 +278,7 @@ }; corenet-cf@18000 { - compatible = "fsl,corenet-cf"; + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; reg = <0x18000 0x1000>; interrupts = <16 2 1 31>; fsl,ccf-num-csdids = <32>; @@ -294,6 +294,7 @@ interrupts = < 24 2 0 0 16 2 1 30>; + fsl,portid-mapping = <0x3c000000>; pamu0: pamu@0 { reg = <0 0x1000>; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi index fe1a2e6613b4..1cc61e126e4c 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi @@ -90,6 +90,7 @@ reg = <0>; clocks = <&mux0>; next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; L2_0: l2-cache { next-level-cache = <&cpc>; }; @@ -99,6 +100,7 @@ reg = <1>; clocks = <&mux1>; next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; L2_1: l2-cache { next-level-cache = <&cpc>; }; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi index 546a899efe20..67296fdd9698 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi @@ -233,7 +233,7 @@ }; corenet-cf@18000 { - compatible = "fsl,corenet-cf"; + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; reg = <0x18000 0x1000>; interrupts = <16 2 1 31>; fsl,ccf-num-csdids = <32>; @@ -248,6 +248,7 @@ #size-cells = <1>; interrupts = <24 2 0 0 16 2 1 30>; + fsl,portid-mapping = <0x0f800000>; pamu0: pamu@0 { reg = <0 0x1000>; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi index 3674686687cb..b048a2be05a8 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi @@ -83,6 +83,7 @@ reg = <0>; clocks = <&mux0>; next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; L2_0: l2-cache { next-level-cache = <&cpc>; }; @@ -92,6 +93,7 @@ reg = <1>; clocks = <&mux1>; next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; L2_1: l2-cache { next-level-cache = <&cpc>; }; @@ -101,6 +103,7 @@ reg = <2>; clocks = <&mux2>; next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x20000000>; L2_2: l2-cache { next-level-cache = <&cpc>; }; @@ -110,6 +113,7 @@ reg = <3>; clocks = <&mux3>; next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x10000000>; L2_3: l2-cache { next-level-cache = <&cpc>; }; diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi new file mode 100644 index 000000000000..12e597eea3c8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -0,0 +1,430 @@ +/* + * T1040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <25 2 0 0>; +}; + +&pci0 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <20 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <20 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +&pci1 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + interrupts = <21 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <21 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +&pci2 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <22 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <22 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&pci3 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <23 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <23 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc"; + reg = <0x1000 0x1000 0x1002000 0x10000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0x1A000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-snpc@30000 { + compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x30000 0x1000 0x1022000 0x10000>; + }; + dcsr-snpc@31000 { + compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x31000 0x1000 0x1042000 0x10000>; + }; + dcsr-cpu-sb-proxy@100000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x100000 0x1000 0x101000 0x1000>; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; + dcsr-cpu-sb-proxy@110000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x110000 0x1000 0x111000 0x1000>; + }; + dcsr-cpu-sb-proxy@118000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x118000 0x1000 0x119000 0x1000>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <16>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v5.0", + "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,t1040-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x1000>; + ranges = <0 0x20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <128 1>; + fsl,secondary-cache-geometry = <16 2>; + }; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + fsl,liodn-bits = <12>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0"; + ranges = <0x0 0xe1000 0x1000>; + reg = <0xe1000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-2.0"; + clock-output-names = "sysclk", "fixed-clock"; + }; + + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0_0", "pll0_1", "pll0_2", + "pll1_0", "pll1_1", "pll1_2"; + clock-output-names = "cmux3"; + }; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,t1040-sfp"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,t1040-serdes"; + reg = <0xea000 0x4000>; + }; + +/include/ "elo3-dma-0.dtsi" +/include/ "elo3-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,t1040-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + sdhci,auto-cmd12; + }; +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; + + display@180000 { + compatible = "fsl,t1040-diu", "fsl,diu"; + reg = <0x180000 1000>; + interrupts = <74 2 0 0>; + }; + +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; +/include/ "qoriq-sec5.0-0.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi new file mode 100644 index 000000000000..319b74f29724 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi @@ -0,0 +1,37 @@ +/* + * T1042 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t1040si-post.dtsi" + +/* Place holder for ethernet related device tree nodes */ diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi new file mode 100644 index 000000000000..bbb7025ca9c2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi @@ -0,0 +1,104 @@ +/* + * T1040/T1042 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e5500_power_isa.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + sdhc = &sdhc; + + crypto = &crypto; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e5500@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e5500@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&mux1>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e5500@2 { + device_type = "cpu"; + reg = <2>; + clocks = <&mux2>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e5500@3 { + device_type = "cpu"; + reg = <3>; + clocks = <&mux3>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi index f99d74ff11b4..793669baa13e 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -343,7 +343,7 @@ }; corenet-cf@18000 { - compatible = "fsl,corenet-cf"; + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; reg = <0x18000 0x1000>; interrupts = <16 2 1 31>; fsl,ccf-num-csdids = <32>; @@ -353,6 +353,7 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; reg = <0x20000 0x6000>; + fsl,portid-mapping = <0x8000>; interrupts = < 24 2 0 0 16 2 1 30>; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi index 0b8ccc5b4a46..d2f157edbe81 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi @@ -69,72 +69,84 @@ reg = <0 1>; clocks = <&mux0>; next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; clocks = <&mux0>; next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; }; cpu2: PowerPC,e6500@4 { device_type = "cpu"; reg = <4 5>; clocks = <&mux0>; next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; }; cpu3: PowerPC,e6500@6 { device_type = "cpu"; reg = <6 7>; clocks = <&mux0>; next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; }; cpu4: PowerPC,e6500@8 { device_type = "cpu"; reg = <8 9>; clocks = <&mux1>; next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; }; cpu5: PowerPC,e6500@10 { device_type = "cpu"; reg = <10 11>; clocks = <&mux1>; next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; }; cpu6: PowerPC,e6500@12 { device_type = "cpu"; reg = <12 13>; clocks = <&mux1>; next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; }; cpu7: PowerPC,e6500@14 { device_type = "cpu"; reg = <14 15>; clocks = <&mux1>; next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; }; cpu8: PowerPC,e6500@16 { device_type = "cpu"; reg = <16 17>; clocks = <&mux2>; next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; }; cpu9: PowerPC,e6500@18 { device_type = "cpu"; reg = <18 19>; clocks = <&mux2>; next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; }; cpu10: PowerPC,e6500@20 { device_type = "cpu"; reg = <20 21>; clocks = <&mux2>; next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; }; cpu11: PowerPC,e6500@22 { device_type = "cpu"; reg = <22 23>; clocks = <&mux2>; next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; }; }; }; diff --git a/arch/powerpc/boot/dts/kmcoge4.dts b/arch/powerpc/boot/dts/kmcoge4.dts new file mode 100644 index 000000000000..89b4119f3b19 --- /dev/null +++ b/arch/powerpc/boot/dts/kmcoge4.dts @@ -0,0 +1,152 @@ +/* + * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS + * + * (C) Copyright 2014 + * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p2041si-pre.dtsi" + +/ { + model = "keymile,kmcoge4"; + compatible = "keymile,kmcoge4", "keymile,kmp204x"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl256s1"; + reg = <0>; + spi-max-frequency = <20000000>; /* input clock */ + }; + + network_clock@1 { + compatible = "zarlink,zl30343"; + reg = <1>; + spi-max-frequency = <8000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,m25p32"; + reg = <2>; + spi-max-frequency = <15000000>; + }; + }; + + i2c@119000 { + status = "disabled"; + }; + + i2c@119100 { + status = "disabled"; + }; + + usb0: usb@210000 { + status = "disabled"; + }; + + usb1: usb@211000 { + status = "disabled"; + }; + + sata@220000 { + status = "disabled"; + }; + + sata@221000 { + status = "disabled"; + }; + }; + + rio: rapidio@ffe0c0000 { + status = "disabled"; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xffa00000 0x00040000 /* LB 0 */ + 1 0 0xf 0xfb000000 0x00010000 /* LB 1 */ + 2 0 0xf 0xd0000000 0x10000000 /* LB 2 */ + 3 0 0xf 0xe0000000 0x10000000>; /* LB 3 */ + + nand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0 0 0x40000>; + }; + + board-control@1,0 { + compatible = "keymile,qriox"; + reg = <1 0 0x80>; + }; + + chassis-mgmt@3,0 { + compatible = "keymile,bfticu"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <3 0 0x100>; + interrupt-parent = <&mpic>; + interrupts = <6 1 0 0>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + status = "disabled"; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "fsl/p2041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/oca4080.dts b/arch/powerpc/boot/dts/oca4080.dts new file mode 100644 index 000000000000..3d4c751d1608 --- /dev/null +++ b/arch/powerpc/boot/dts/oca4080.dts @@ -0,0 +1,118 @@ +/* + * OCA4080 Device Tree Source + * + * Copyright 2014 Prodrive Technologies B.V. + * + * Based on: + * P4080DS Device Tree Source + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p4080si-pre.dtsi" + +/ { + model = "fsl,OCA4080"; + compatible = "fsl,OCA4080"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + i2c@118000 { + status = "disabled"; + }; + + i2c@118100 { + status = "disabled"; + }; + + i2c@119000 { + status = "disabled"; + }; + + i2c@119100 { + status = "disabled"; + }; + + usb0: usb@210000 { + status = "disabled"; + }; + + usb1: usb@211000 { + status = "disabled"; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xef800000 0x800000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + pci0: pcie@ffe200000 { + status = "disabled"; + }; + + pci1: pcie@ffe201000 { + status = "disabled"; + }; + + pci2: pcie@ffe202000 { + status = "disabled"; + }; +}; + +/include/ "fsl/p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts deleted file mode 100644 index beb6cb12e59d..000000000000 --- a/arch/powerpc/boot/dts/p1023rds.dts +++ /dev/null @@ -1,219 +0,0 @@ -/* - * P1023 RDS Device Tree Source - * - * Copyright 2010-2011 Freescale Semiconductor Inc. - * - * Author: Roy Zang <tie-fei.zang@freescale.com> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/include/ "fsl/p1023si-pre.dtsi" - -/ { - model = "fsl,P1023"; - compatible = "fsl,P1023RDS"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - memory { - device_type = "memory"; - }; - - soc: soc@ff600000 { - ranges = <0x0 0x0 0xff600000 0x200000>; - - i2c@3000 { - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; - }; - }; - - spi@7000 { - fsl_dataflash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "atmel,at45db081d"; - reg = <0>; - spi-max-frequency = <40000000>; /* input clock */ - partition@u-boot { - /* 512KB for u-boot Bootloader Image */ - label = "u-boot-spi"; - reg = <0x00000000 0x00080000>; - read-only; - }; - partition@dtb { - /* 512KB for DTB Image */ - label = "dtb-spi"; - reg = <0x00080000 0x00080000>; - read-only; - }; - }; - }; - - usb@22000 { - dr_mode = "host"; - phy_type = "ulpi"; - }; - }; - - lbc: localbus@ff605000 { - reg = <0 0xff605000 0 0x1000>; - - /* NOR Flash, BCSR */ - ranges = <0x0 0x0 0x0 0xee000000 0x02000000 - 0x1 0x0 0x0 0xe0000000 0x00008000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x02000000>; - bank-width = <2>; - device-width = <1>; - partition@0 { - label = "ramdisk"; - reg = <0x00000000 0x01c00000>; - }; - partition@1c00000 { - label = "kernel"; - reg = <0x01c00000 0x002e0000>; - }; - partiton@1ee0000 { - label = "dtb"; - reg = <0x01ee0000 0x00020000>; - }; - partition@1f00000 { - label = "firmware"; - reg = <0x01f00000 0x00080000>; - read-only; - }; - partition@1f80000 { - label = "u-boot"; - reg = <0x01f80000 0x00080000>; - read-only; - }; - }; - - fpga@1,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,p1023rds-fpga"; - reg = <1 0 0x8000>; - ranges = <0 1 0 0x8000>; - - bcsr@20 { - compatible = "fsl,p1023rds-bcsr"; - reg = <0x20 0x20>; - }; - }; - }; - - pci0: pcie@ff60a000 { - reg = <0 0xff60a000 0 0x1000>; - ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; - pcie@0 { - /* IRQ[0:3] are pulled up on board, set to active-low */ - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 0 0 - 0000 0 0 2 &mpic 1 1 0 0 - 0000 0 0 3 &mpic 2 1 0 0 - 0000 0 0 4 &mpic 3 1 0 0 - >; - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - board_pci1: pci1: pcie@ff609000 { - reg = <0 0xff609000 0 0x1000>; - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - pcie@0 { - /* - * IRQ[4:6] only for PCIe, set to active-high, - * IRQ[7] is pulled up on board, set to active-low - */ - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 2 0 0 - 0000 0 0 2 &mpic 5 2 0 0 - 0000 0 0 3 &mpic 6 2 0 0 - 0000 0 0 4 &mpic 7 1 0 0 - >; - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci2: pcie@ff60b000 { - reg = <0 0xff60b000 0 0x1000>; - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - pcie@0 { - /* - * IRQ[8:10] are pulled up on board, set to active-low - * IRQ[11] only for PCIe, set to active-high, - */ - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 8 1 0 0 - 0000 0 0 2 &mpic 9 1 0 0 - 0000 0 0 3 &mpic 10 1 0 0 - 0000 0 0 4 &mpic 11 2 0 0 - >; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; -}; - -/include/ "fsl/p1023si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1040qds.dts b/arch/powerpc/boot/dts/t1040qds.dts new file mode 100644 index 000000000000..973c29c2f56e --- /dev/null +++ b/arch/powerpc/boot/dts/t1040qds.dts @@ -0,0 +1,46 @@ +/* + * T1040QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xqds.dtsi" + +/ { + model = "fsl,T1040QDS"; + compatible = "fsl,T1040QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +/include/ "fsl/t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1042qds.dts b/arch/powerpc/boot/dts/t1042qds.dts new file mode 100644 index 000000000000..45bd03752154 --- /dev/null +++ b/arch/powerpc/boot/dts/t1042qds.dts @@ -0,0 +1,46 @@ +/* + * T1042QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xqds.dtsi" + +/ { + model = "fsl,T1042QDS"; + compatible = "fsl,T1042QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +/include/ "fsl/t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t104xqds.dtsi b/arch/powerpc/boot/dts/t104xqds.dtsi new file mode 100644 index 000000000000..234f4b596c5b --- /dev/null +++ b/arch/powerpc/boot/dts/t104xqds.dtsi @@ -0,0 +1,166 @@ +/* + * T104xQDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T1040QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,fpga-qixis"; + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clock */ + }; + }; + + i2c@118000 { + pca9547@77 { + compatible = "philips,pca9547"; + reg = <0x77>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/t4240emu.dts b/arch/powerpc/boot/dts/t4240emu.dts index ee24ab335598..bc12127a03fb 100644 --- a/arch/powerpc/boot/dts/t4240emu.dts +++ b/arch/powerpc/boot/dts/t4240emu.dts @@ -60,63 +60,75 @@ device_type = "cpu"; reg = <0 1>; next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; }; cpu2: PowerPC,e6500@4 { device_type = "cpu"; reg = <4 5>; next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; }; cpu3: PowerPC,e6500@6 { device_type = "cpu"; reg = <6 7>; next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; }; cpu4: PowerPC,e6500@8 { device_type = "cpu"; reg = <8 9>; next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; }; cpu5: PowerPC,e6500@10 { device_type = "cpu"; reg = <10 11>; next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; }; cpu6: PowerPC,e6500@12 { device_type = "cpu"; reg = <12 13>; next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; }; cpu7: PowerPC,e6500@14 { device_type = "cpu"; reg = <14 15>; next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; }; cpu8: PowerPC,e6500@16 { device_type = "cpu"; reg = <16 17>; next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; }; cpu9: PowerPC,e6500@18 { device_type = "cpu"; reg = <18 19>; next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; }; cpu10: PowerPC,e6500@20 { device_type = "cpu"; reg = <20 21>; next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; }; cpu11: PowerPC,e6500@22 { device_type = "cpu"; reg = <22 23>; next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; }; }; }; @@ -213,7 +225,7 @@ }; corenet-cf@18000 { - compatible = "fsl,corenet-cf"; + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; reg = <0x18000 0x1000>; interrupts = <16 2 1 31>; fsl,ccf-num-csdids = <32>; @@ -223,6 +235,7 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; reg = <0x20000 0x6000>; + fsl,portid-mapping = <0x8000>; interrupts = < 24 2 0 0 16 2 1 30>; diff --git a/arch/powerpc/boot/elf_util.c b/arch/powerpc/boot/elf_util.c index 1567a0c0f05c..316552dea4d8 100644 --- a/arch/powerpc/boot/elf_util.c +++ b/arch/powerpc/boot/elf_util.c @@ -26,7 +26,11 @@ int parse_elf64(void *hdr, struct elf_info *info) elf64->e_ident[EI_MAG2] == ELFMAG2 && elf64->e_ident[EI_MAG3] == ELFMAG3 && elf64->e_ident[EI_CLASS] == ELFCLASS64 && +#ifdef __LITTLE_ENDIAN__ + elf64->e_ident[EI_DATA] == ELFDATA2LSB && +#else elf64->e_ident[EI_DATA] == ELFDATA2MSB && +#endif (elf64->e_type == ET_EXEC || elf64->e_type == ET_DYN) && elf64->e_machine == EM_PPC64)) diff --git a/arch/powerpc/boot/of.c b/arch/powerpc/boot/of.c index 62e2f43ec1df..7ca910cb2fc6 100644 --- a/arch/powerpc/boot/of.c +++ b/arch/powerpc/boot/of.c @@ -40,8 +40,8 @@ static void *of_try_claim(unsigned long size) #ifdef DEBUG printf(" trying: 0x%08lx\n\r", claim_base); #endif - addr = (unsigned long)of_claim(claim_base, size, 0); - if ((void *)addr != (void *)-1) + addr = (unsigned long) of_claim(claim_base, size, 0); + if (addr != PROM_ERROR) break; } if (addr == 0) diff --git a/arch/powerpc/boot/of.h b/arch/powerpc/boot/of.h index e4c68f7391c5..c8c1750aba0c 100644 --- a/arch/powerpc/boot/of.h +++ b/arch/powerpc/boot/of.h @@ -1,12 +1,15 @@ #ifndef _PPC_BOOT_OF_H_ #define _PPC_BOOT_OF_H_ +#include "swab.h" + typedef void *phandle; -typedef void *ihandle; +typedef u32 ihandle; void of_init(void *promptr); int of_call_prom(const char *service, int nargs, int nret, ...); -void *of_claim(unsigned long virt, unsigned long size, unsigned long align); +unsigned int of_claim(unsigned long virt, unsigned long size, + unsigned long align); void *of_vmlinux_alloc(unsigned long size); void of_exit(void); void *of_finddevice(const char *name); @@ -18,4 +21,16 @@ int of_setprop(const void *phandle, const char *name, const void *buf, /* Console functions */ void of_console_init(void); +typedef u32 __be32; + +#ifdef __LITTLE_ENDIAN__ +#define cpu_to_be32(x) swab32(x) +#define be32_to_cpu(x) swab32(x) +#else +#define cpu_to_be32(x) (x) +#define be32_to_cpu(x) (x) +#endif + +#define PROM_ERROR (-1u) + #endif /* _PPC_BOOT_OF_H_ */ diff --git a/arch/powerpc/boot/ofconsole.c b/arch/powerpc/boot/ofconsole.c index ce0e02424453..8b754702460a 100644 --- a/arch/powerpc/boot/ofconsole.c +++ b/arch/powerpc/boot/ofconsole.c @@ -18,7 +18,7 @@ #include "of.h" -static void *of_stdout_handle; +static unsigned int of_stdout_handle; static int of_console_open(void) { @@ -27,8 +27,10 @@ static int of_console_open(void) if (((devp = of_finddevice("/chosen")) != NULL) && (of_getprop(devp, "stdout", &of_stdout_handle, sizeof(of_stdout_handle)) - == sizeof(of_stdout_handle))) + == sizeof(of_stdout_handle))) { + of_stdout_handle = be32_to_cpu(of_stdout_handle); return 0; + } return -1; } diff --git a/arch/powerpc/boot/oflib.c b/arch/powerpc/boot/oflib.c index b0ec9cf3eaaf..46c98a47d949 100644 --- a/arch/powerpc/boot/oflib.c +++ b/arch/powerpc/boot/oflib.c @@ -16,74 +16,83 @@ #include "of.h" +typedef u32 prom_arg_t; + +/* The following structure is used to communicate with open firmware. + * All arguments in and out are in big endian format. */ +struct prom_args { + __be32 service; /* Address of service name string. */ + __be32 nargs; /* Number of input arguments. */ + __be32 nret; /* Number of output arguments. */ + __be32 args[10]; /* Input/output arguments. */ +}; + +#ifdef __powerpc64__ +extern int prom(void *); +#else static int (*prom) (void *); +#endif void of_init(void *promptr) { +#ifndef __powerpc64__ prom = (int (*)(void *))promptr; +#endif } +#define ADDR(x) (u32)(unsigned long)(x) + int of_call_prom(const char *service, int nargs, int nret, ...) { int i; - struct prom_args { - const char *service; - int nargs; - int nret; - unsigned int args[12]; - } args; + struct prom_args args; va_list list; - args.service = service; - args.nargs = nargs; - args.nret = nret; + args.service = cpu_to_be32(ADDR(service)); + args.nargs = cpu_to_be32(nargs); + args.nret = cpu_to_be32(nret); va_start(list, nret); for (i = 0; i < nargs; i++) - args.args[i] = va_arg(list, unsigned int); + args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t)); va_end(list); for (i = 0; i < nret; i++) args.args[nargs+i] = 0; if (prom(&args) < 0) - return -1; + return PROM_ERROR; - return (nret > 0)? args.args[nargs]: 0; + return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0; } static int of_call_prom_ret(const char *service, int nargs, int nret, - unsigned int *rets, ...) + prom_arg_t *rets, ...) { int i; - struct prom_args { - const char *service; - int nargs; - int nret; - unsigned int args[12]; - } args; + struct prom_args args; va_list list; - args.service = service; - args.nargs = nargs; - args.nret = nret; + args.service = cpu_to_be32(ADDR(service)); + args.nargs = cpu_to_be32(nargs); + args.nret = cpu_to_be32(nret); va_start(list, rets); for (i = 0; i < nargs; i++) - args.args[i] = va_arg(list, unsigned int); + args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t)); va_end(list); for (i = 0; i < nret; i++) args.args[nargs+i] = 0; if (prom(&args) < 0) - return -1; + return PROM_ERROR; - if (rets != (void *) 0) + if (rets != NULL) for (i = 1; i < nret; ++i) - rets[i-1] = args.args[nargs+i]; + rets[i-1] = be32_to_cpu(args.args[nargs+i]); - return (nret > 0)? args.args[nargs]: 0; + return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0; } /* returns true if s2 is a prefix of s1 */ @@ -103,7 +112,7 @@ static int string_match(const char *s1, const char *s2) */ static int need_map = -1; static ihandle chosen_mmu; -static phandle memory; +static ihandle memory; static int check_of_version(void) { @@ -132,10 +141,10 @@ static int check_of_version(void) printf("no mmu\n"); return 0; } - memory = (ihandle) of_call_prom("open", 1, 1, "/memory"); - if (memory == (ihandle) -1) { - memory = (ihandle) of_call_prom("open", 1, 1, "/memory@0"); - if (memory == (ihandle) -1) { + memory = of_call_prom("open", 1, 1, "/memory"); + if (memory == PROM_ERROR) { + memory = of_call_prom("open", 1, 1, "/memory@0"); + if (memory == PROM_ERROR) { printf("no memory node\n"); return 0; } @@ -144,40 +153,41 @@ static int check_of_version(void) return 1; } -void *of_claim(unsigned long virt, unsigned long size, unsigned long align) +unsigned int of_claim(unsigned long virt, unsigned long size, + unsigned long align) { int ret; - unsigned int result; + prom_arg_t result; if (need_map < 0) need_map = check_of_version(); if (align || !need_map) - return (void *) of_call_prom("claim", 3, 1, virt, size, align); + return of_call_prom("claim", 3, 1, virt, size, align); ret = of_call_prom_ret("call-method", 5, 2, &result, "claim", memory, align, size, virt); if (ret != 0 || result == -1) - return (void *) -1; + return -1; ret = of_call_prom_ret("call-method", 5, 2, &result, "claim", chosen_mmu, align, size, virt); /* 0x12 == coherent + read/write */ ret = of_call_prom("call-method", 6, 1, "map", chosen_mmu, 0x12, size, virt, virt); - return (void *) virt; + return virt; } void *of_vmlinux_alloc(unsigned long size) { unsigned long start = (unsigned long)_start, end = (unsigned long)_end; - void *addr; + unsigned long addr; void *p; /* With some older POWER4 firmware we need to claim the area the kernel * will reside in. Newer firmwares don't need this so we just ignore * the return value. */ - addr = of_claim(start, end - start, 0); - printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %p\r\n", + addr = (unsigned long) of_claim(start, end - start, 0); + printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %lx\r\n", start, end, end - start, addr); p = malloc(size); @@ -197,7 +207,7 @@ void of_exit(void) */ void *of_finddevice(const char *name) { - return (phandle) of_call_prom("finddevice", 1, 1, name); + return (void *) (unsigned long) of_call_prom("finddevice", 1, 1, name); } int of_getprop(const void *phandle, const char *name, void *buf, diff --git a/arch/powerpc/boot/ppc_asm.h b/arch/powerpc/boot/ppc_asm.h index eb0e98be69e0..35ea60c1f070 100644 --- a/arch/powerpc/boot/ppc_asm.h +++ b/arch/powerpc/boot/ppc_asm.h @@ -62,4 +62,16 @@ #define SPRN_TBRL 268 #define SPRN_TBRU 269 +#define FIXUP_ENDIAN \ + tdi 0, 0, 0x48; /* Reverse endian of b . + 8 */ \ + b $+36; /* Skip trampoline if endian is good */ \ + .long 0x05009f42; /* bcl 20,31,$+4 */ \ + .long 0xa602487d; /* mflr r10 */ \ + .long 0x1c004a39; /* addi r10,r10,28 */ \ + .long 0xa600607d; /* mfmsr r11 */ \ + .long 0x01006b69; /* xori r11,r11,1 */ \ + .long 0xa6035a7d; /* mtsrr0 r10 */ \ + .long 0xa6037b7d; /* mtsrr1 r11 */ \ + .long 0x2400004c /* rfid */ + #endif /* _PPC64_PPC_ASM_H */ diff --git a/arch/powerpc/boot/pseries-head.S b/arch/powerpc/boot/pseries-head.S new file mode 100644 index 000000000000..6ef6e02e80f9 --- /dev/null +++ b/arch/powerpc/boot/pseries-head.S @@ -0,0 +1,8 @@ +#include "ppc_asm.h" + + .text + + .globl _zimage_start +_zimage_start: + FIXUP_ENDIAN + b _zimage_start_lib diff --git a/arch/powerpc/boot/stdio.c b/arch/powerpc/boot/stdio.c index 5b57800bbc67..a701261b1781 100644 --- a/arch/powerpc/boot/stdio.c +++ b/arch/powerpc/boot/stdio.c @@ -21,6 +21,18 @@ size_t strnlen(const char * s, size_t count) return sc - s; } +#ifdef __powerpc64__ + +# define do_div(n, base) ({ \ + unsigned int __base = (base); \ + unsigned int __rem; \ + __rem = ((unsigned long long)(n)) % __base; \ + (n) = ((unsigned long long)(n)) / __base; \ + __rem; \ +}) + +#else + extern unsigned int __div64_32(unsigned long long *dividend, unsigned int divisor); @@ -39,6 +51,8 @@ extern unsigned int __div64_32(unsigned long long *dividend, __rem; \ }) +#endif /* __powerpc64__ */ + static int skip_atoi(const char **s) { int i, c; diff --git a/arch/powerpc/boot/swab.h b/arch/powerpc/boot/swab.h new file mode 100644 index 000000000000..d0e1431084ca --- /dev/null +++ b/arch/powerpc/boot/swab.h @@ -0,0 +1,29 @@ +#ifndef _PPC_BOOT_SWAB_H_ +#define _PPC_BOOT_SWAB_H_ + +static inline u16 swab16(u16 x) +{ + return ((x & (u16)0x00ffU) << 8) | + ((x & (u16)0xff00U) >> 8); +} + +static inline u32 swab32(u32 x) +{ + return ((x & (u32)0x000000ffUL) << 24) | + ((x & (u32)0x0000ff00UL) << 8) | + ((x & (u32)0x00ff0000UL) >> 8) | + ((x & (u32)0xff000000UL) >> 24); +} + +static inline u64 swab64(u64 x) +{ + return (u64)((x & (u64)0x00000000000000ffULL) << 56) | + (u64)((x & (u64)0x000000000000ff00ULL) << 40) | + (u64)((x & (u64)0x0000000000ff0000ULL) << 24) | + (u64)((x & (u64)0x00000000ff000000ULL) << 8) | + (u64)((x & (u64)0x000000ff00000000ULL) >> 8) | + (u64)((x & (u64)0x0000ff0000000000ULL) >> 24) | + (u64)((x & (u64)0x00ff000000000000ULL) >> 40) | + (u64)((x & (u64)0xff00000000000000ULL) >> 56); +} +#endif /* _PPC_BOOT_SWAB_H_ */ diff --git a/arch/powerpc/boot/treeboot-akebono.c b/arch/powerpc/boot/treeboot-akebono.c new file mode 100644 index 000000000000..b73174c34fe4 --- /dev/null +++ b/arch/powerpc/boot/treeboot-akebono.c @@ -0,0 +1,163 @@ +/* + * Copyright © 2013 Tony Breeds IBM Corporation + * Copyright © 2013 Alistair Popple IBM Corporation + * + * Based on earlier code: + * Copyright (C) Paul Mackerras 1997. + * + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003, 2004 Zultys Technologies + * + * Copyright 2007 David Gibson, IBM Corporation. + * Copyright 2010 Ben. Herrenschmidt, IBM Corporation. + * Copyright © 2011 David Kleikamp IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <stdarg.h> +#include <stddef.h> +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdlib.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "reg.h" +#include "io.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "libfdt.h" + +BSS_STACK(4096); + +#define SPRN_PIR 0x11E /* Processor Indentification Register */ +#define USERDATA_LEN 256 /* Length of userdata passed in by PIBS */ +#define MAX_RANKS 0x4 +#define DDR3_MR0CF 0x80010011U +#define CCTL0_MCO2 0x8000080FU +#define CCTL0_MCO3 0x80000810U +#define CCTL0_MCO4 0x80000811U +#define CCTL0_MCO5 0x80000812U +#define CCTL0_MCO6 0x80000813U + +static unsigned long long ibm_akebono_memsize; +static long long unsigned mac_addr; + +static unsigned long long ibm_akebono_detect_memsize(void) +{ + u32 reg; + unsigned i; + unsigned long long memsize = 0; + + for (i = 0; i < MAX_RANKS; i++) { + reg = mfdcrx(DDR3_MR0CF + i); + + if (!(reg & 1)) + continue; + + reg &= 0x0000f000; + reg >>= 12; + memsize += (0x800000ULL << reg); + } + + return memsize; +} + +static void ibm_akebono_fixups(void) +{ + void *emac; + u32 reg; + + dt_fixup_memory(0x0ULL, ibm_akebono_memsize); + + /* Fixup the SD timeout frequency */ + mtdcrx(CCTL0_MCO4, 0x1); + + /* Disable SD high-speed mode (which seems to be broken) */ + reg = mfdcrx(CCTL0_MCO2) & ~0x2; + mtdcrx(CCTL0_MCO2, reg); + + /* Set the MAC address */ + emac = finddevice("/plb/opb/ethernet"); + if (emac > 0) { + if (mac_addr) + setprop(emac, "local-mac-address", + ((u8 *) &mac_addr) + 2 , 6); + } +} + +void platform_init(char *userdata) +{ + unsigned long end_of_ram, avail_ram; + u32 pir_reg; + int node, size; + const u32 *timebase; + int len, i, userdata_len; + char *end; + + userdata[USERDATA_LEN - 1] = '\0'; + userdata_len = strlen(userdata); + for (i = 0; i < userdata_len - 15; i++) { + if (strncmp(&userdata[i], "local-mac-addr=", 15) == 0) { + if (i > 0 && userdata[i - 1] != ' ') { + /* We've only found a substring ending + * with local-mac-addr so this isn't + * our mac address. */ + continue; + } + + mac_addr = strtoull(&userdata[i + 15], &end, 16); + + /* Remove the "local-mac-addr=<...>" from the kernel + * command line, including the tailing space if + * present. */ + if (*end == ' ') + end++; + + len = ((int) end) - ((int) &userdata[i]); + memmove(&userdata[i], end, + userdata_len - (len + i) + 1); + break; + } + } + + loader_info.cmdline = userdata; + loader_info.cmdline_len = 256; + + ibm_akebono_memsize = ibm_akebono_detect_memsize(); + if (ibm_akebono_memsize >> 32) + end_of_ram = ~0UL; + else + end_of_ram = ibm_akebono_memsize; + avail_ram = end_of_ram - (unsigned long)_end; + + simple_alloc_init(_end, avail_ram, 128, 64); + platform_ops.fixups = ibm_akebono_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + pir_reg = mfspr(SPRN_PIR); + + /* Make sure FDT blob is sane */ + if (fdt_check_header(_dtb_start) != 0) + fatal("Invalid device tree blob\n"); + + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "cpu", sizeof("cpu")); + if (!node) + fatal("Cannot find cpu node\n"); + timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size); + if (timebase && (size == 4)) + timebase_period_ns = 1000000000 / *timebase; + + fdt_set_boot_cpuid_phys(_dtb_start, pir_reg); + fdt_init(_dtb_start); + + serial_console_init(); +} diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S index 6636b1d7821b..243b8497d58b 100644 --- a/arch/powerpc/boot/util.S +++ b/arch/powerpc/boot/util.S @@ -45,7 +45,7 @@ udelay: mfspr r4,SPRN_PVR srwi r4,r4,16 cmpwi 0,r4,1 /* 601 ? */ - bne .udelay_not_601 + bne .Ludelay_not_601 00: li r0,86 /* Instructions / microsecond? */ mtctr r0 10: addi r0,r0,0 /* NOP */ @@ -54,7 +54,7 @@ udelay: bne 00b blr -.udelay_not_601: +.Ludelay_not_601: mulli r4,r3,1000 /* nanoseconds */ /* Change r4 to be the number of ticks using: * (nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index d27a25518b01..ae0f88ec4a32 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -40,6 +40,7 @@ cacheit= binary= gzip=.gz pie= +format= # cross-compilation prefix CROSS= @@ -136,6 +137,14 @@ if [ -z "$kernel" ]; then kernel=vmlinux fi +elfformat="`${CROSS}objdump -p "$kernel" | grep 'file format' | awk '{print $4}'`" +case "$elfformat" in + elf64-powerpcle) format=elf64lppc ;; + elf64-powerpc) format=elf32ppc ;; + elf32-powerpc) format=elf32ppc ;; +esac + + platformo=$object/"$platform".o lds=$object/zImage.lds ext=strip @@ -152,8 +161,12 @@ of) make_space=n ;; pseries) - platformo="$object/of.o $object/epapr.o" + platformo="$object/pseries-head.o $object/of.o $object/epapr.o" link_address='0x4000000' + if [ "$format" != "elf32ppc" ]; then + link_address= + pie=-pie + fi make_space=n ;; maple) @@ -257,6 +270,9 @@ gamecube|wii) treeboot-currituck) link_address='0x1000000' ;; +treeboot-akebono) + link_address='0x1000000' + ;; treeboot-iss4xx-mpic) platformo="$object/treeboot-iss4xx.o" ;; @@ -379,7 +395,7 @@ if [ "$platform" != "miboot" ]; then if [ -n "$link_address" ] ; then text_start="-Ttext $link_address" fi - ${CROSS}ld -m elf32ppc -T $lds $text_start $pie -o "$ofile" \ + ${CROSS}ld -m $format -T $lds $text_start $pie -o "$ofile" \ $platformo $tmp $object/wrapper.a rm $tmp fi diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S index 2bd8731f1365..861e72109df2 100644 --- a/arch/powerpc/boot/zImage.lds.S +++ b/arch/powerpc/boot/zImage.lds.S @@ -1,4 +1,10 @@ +#include <asm-generic/vmlinux.lds.h> + +#ifdef CONFIG_PPC64_BOOT_WRAPPER +OUTPUT_ARCH(powerpc:common64) +#else OUTPUT_ARCH(powerpc:common) +#endif ENTRY(_zimage_start) EXTERN(_zimage_start) SECTIONS @@ -16,7 +22,9 @@ SECTIONS *(.rodata*) *(.data*) *(.sdata*) +#ifndef CONFIG_PPC64_BOOT_WRAPPER *(.got2) +#endif } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } @@ -27,7 +35,13 @@ SECTIONS } .hash : { *(.hash) } .interp : { *(.interp) } - .rela.dyn : { *(.rela*) } + .rela.dyn : + { +#ifdef CONFIG_PPC64_BOOT_WRAPPER + __rela_dyn_start = .; +#endif + *(.rela*) + } . = ALIGN(8); .kernel:dtb : @@ -53,6 +67,15 @@ SECTIONS _initrd_end = .; } +#ifdef CONFIG_PPC64_BOOT_WRAPPER + .got : + { + __toc_start = .; + *(.got) + *(.toc) + } +#endif + . = ALIGN(4096); .bss : { diff --git a/arch/powerpc/configs/44x/akebono_defconfig b/arch/powerpc/configs/44x/akebono_defconfig new file mode 100644 index 000000000000..7e2530cd9d30 --- /dev/null +++ b/arch/powerpc/configs/44x/akebono_defconfig @@ -0,0 +1,148 @@ +CONFIG_44x=y +CONFIG_SMP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_EXPERT=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_SLUB_CPU_PARTIAL is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_POWERNV_MSI is not set +CONFIG_PPC_47x=y +# CONFIG_EBONY is not set +CONFIG_AKEBONO=y +CONFIG_HIGHMEM=y +CONFIG_HZ_100=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_COMPACTION is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +# CONFIG_SUSPEND is not set +CONFIG_PCI_MSI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SATA_PMP is not set +# CONFIG_ATA_SFF is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_ATHEROS is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CISCO is not set +# CONFIG_NET_VENDOR_DEC is not set +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EXAR is not set +# CONFIG_NET_VENDOR_HP is not set +CONFIG_IBM_EMAC=y +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MELLANOX is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MYRI is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +# CONFIG_NET_VENDOR_OKI is not set +# CONFIG_NET_VENDOR_QLOGIC is not set +# CONFIG_NET_VENDOR_REALTEK is not set +# CONFIG_NET_VENDOR_RDC is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_NET_VENDOR_XILINX is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C_CHARDEV=y +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_USB_DEFAULT_PERSIST is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PCI is not set +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_M41T80=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +CONFIG_VFAT_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_CRAMFS=y +# CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_NLS_DEFAULT="n" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +CONFIG_PPC_EARLY_DEBUG=y +CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x00010000 +CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x33f +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1_PPC=y +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set diff --git a/arch/powerpc/configs/85xx/kmp204x_defconfig b/arch/powerpc/configs/85xx/kmp204x_defconfig new file mode 100644 index 000000000000..e9a81e5ba273 --- /dev/null +++ b/arch/powerpc/configs/85xx/kmp204x_defconfig @@ -0,0 +1,225 @@ +CONFIG_PPC_85xx=y +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_AUDIT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +CONFIG_CGROUP_SCHED=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y +CONFIG_CORENET_GENERIC=y +CONFIG_MPIC_MSGR=y +CONFIG_HIGHMEM=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=m +CONFIG_KEXEC=y +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +# CONFIG_PCIEASPM is not set +CONFIG_PCI_MSI=y +CONFIG_ADVANCED_OPTIONS=y +CONFIG_LOWMEM_SIZE_BOOL=y +CONFIG_LOWMEM_SIZE=0x20000000 +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_STATISTICS=y +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +# CONFIG_INET_LRO is not set +CONFIG_IPV6=y +CONFIG_IP_SCTP=m +CONFIG_TIPC=y +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=y +CONFIG_NET_SCH_HTB=y +CONFIG_NET_SCH_HFSC=y +CONFIG_NET_SCH_PRIO=y +CONFIG_NET_SCH_MULTIQ=y +CONFIG_NET_SCH_RED=y +CONFIG_NET_SCH_SFQ=y +CONFIG_NET_SCH_TEQL=y +CONFIG_NET_SCH_TBF=y +CONFIG_NET_SCH_GRED=y +CONFIG_NET_CLS_BASIC=y +CONFIG_NET_CLS_TCINDEX=y +CONFIG_NET_CLS_U32=y +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_FLOW=y +CONFIG_NET_CLS_CGROUP=y +CONFIG_UEVENT_HELPER_PATH="/sbin/mdev" +CONFIG_DEVTMPFS=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_PHRAM=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC_BCH=y +CONFIG_MTD_NAND_FSL_ELBC=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=2048 +CONFIG_EEPROM_AT24=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +CONFIG_BLK_DEV_SR=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_ATHEROS is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CISCO is not set +# CONFIG_NET_VENDOR_DEC is not set +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EXAR is not set +CONFIG_FSL_PQ_MDIO=y +CONFIG_FSL_XGMAC_MDIO=y +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MELLANOX is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_MYRI is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +# CONFIG_NET_VENDOR_OKI is not set +# CONFIG_NET_PACKET_ENGINE is not set +# CONFIG_NET_VENDOR_QLOGIC is not set +# CONFIG_NET_VENDOR_REALTEK is not set +# CONFIG_NET_VENDOR_RDC is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_NET_VENDOR_XILINX is not set +CONFIG_MARVELL_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_FIXED_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_PPC_EPAPR_HV_BYTECHAN=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_NVRAM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_I2C_MPC=y +CONFIG_SPI=y +CONFIG_SPI_FSL_SPI=y +CONFIG_SPI_FSL_ESPI=y +CONFIG_SPI_SPIDEV=m +CONFIG_PTP_1588_CLOCK=y +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_MPC85XX=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS3232=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_UIO=y +CONFIG_STAGING=y +# CONFIG_NET_VENDOR_SILICOM is not set +CONFIG_CLK_PPC_CORENET=y +CONFIG_EXT2_FS=y +CONFIG_NTFS_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y +CONFIG_CRAMFS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_NFS_FS=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=m +CONFIG_CRC_ITU_T=m +CONFIG_DEBUG_INFO=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_SCHEDSTATS=y +CONFIG_RCU_TRACE=y +CONFIG_UPROBE_EVENT=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_FSL_CAAM=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index bbd794deb6eb..c19ff057d0f9 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -72,6 +72,7 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_M25P80=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 19f0fbe5ba4b..55765c8cb08f 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -32,7 +32,6 @@ CONFIG_P1010_RDB=y CONFIG_P1022_DS=y CONFIG_P1022_RDK=y CONFIG_P1023_RDB=y -CONFIG_P1023_RDS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y CONFIG_XES_MPC85xx=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 062312e1fe1a..5c6ecdc0f70e 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -35,7 +35,6 @@ CONFIG_P1010_RDB=y CONFIG_P1022_DS=y CONFIG_P1022_RDK=y CONFIG_P1023_RDB=y -CONFIG_P1023_RDS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y CONFIG_XES_MPC85xx=y diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h index 97e02f985df8..37991e154ef8 100644 --- a/arch/powerpc/include/asm/code-patching.h +++ b/arch/powerpc/include/asm/code-patching.h @@ -42,15 +42,47 @@ void __patch_exception(int exc, unsigned long addr); } while (0) #endif +#define OP_RT_RA_MASK 0xffff0000UL +#define LIS_R2 0x3c020000UL +#define ADDIS_R2_R12 0x3c4c0000UL +#define ADDI_R2_R2 0x38420000UL + static inline unsigned long ppc_function_entry(void *func) { -#ifdef CONFIG_PPC64 +#if defined(CONFIG_PPC64) +#if defined(_CALL_ELF) && _CALL_ELF == 2 + u32 *insn = func; + + /* + * A PPC64 ABIv2 function may have a local and a global entry + * point. We need to use the local entry point when patching + * functions, so identify and step over the global entry point + * sequence. + * + * The global entry point sequence is always of the form: + * + * addis r2,r12,XXXX + * addi r2,r2,XXXX + * + * A linker optimisation may convert the addis to lis: + * + * lis r2,XXXX + * addi r2,r2,XXXX + */ + if ((((*insn & OP_RT_RA_MASK) == ADDIS_R2_R12) || + ((*insn & OP_RT_RA_MASK) == LIS_R2)) && + ((*(insn+1) & OP_RT_RA_MASK) == ADDI_R2_R2)) + return (unsigned long)(insn + 2); + else + return (unsigned long)func; +#else /* - * On PPC64 the function pointer actually points to the function's - * descriptor. The first entry in the descriptor is the address - * of the function text. + * On PPC64 ABIv1 the function pointer actually points to the + * function's descriptor. The first entry in the descriptor is the + * address of the function text. */ return ((func_descr_t *)func)->entry; +#endif #else return (unsigned long)func; #endif diff --git a/arch/powerpc/include/asm/context_tracking.h b/arch/powerpc/include/asm/context_tracking.h index b6f5a33b8ee2..40014921ffff 100644 --- a/arch/powerpc/include/asm/context_tracking.h +++ b/arch/powerpc/include/asm/context_tracking.h @@ -2,9 +2,9 @@ #define _ASM_POWERPC_CONTEXT_TRACKING_H #ifdef CONFIG_CONTEXT_TRACKING -#define SCHEDULE_USER bl .schedule_user +#define SCHEDULE_USER bl schedule_user #else -#define SCHEDULE_USER bl .schedule +#define SCHEDULE_USER bl schedule #endif #endif diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h index ac3eedb9b74a..2bf8e9307be9 100644 --- a/arch/powerpc/include/asm/cputhreads.h +++ b/arch/powerpc/include/asm/cputhreads.h @@ -18,10 +18,12 @@ #ifdef CONFIG_SMP extern int threads_per_core; +extern int threads_per_subcore; extern int threads_shift; extern cpumask_t threads_core_mask; #else #define threads_per_core 1 +#define threads_per_subcore 1 #define threads_shift 0 #define threads_core_mask (CPU_MASK_CPU0) #endif @@ -74,6 +76,11 @@ static inline int cpu_thread_in_core(int cpu) return cpu & (threads_per_core - 1); } +static inline int cpu_thread_in_subcore(int cpu) +{ + return cpu & (threads_per_subcore - 1); +} + static inline int cpu_first_thread_sibling(int cpu) { return cpu & ~(threads_per_core - 1); diff --git a/arch/powerpc/include/asm/debug.h b/arch/powerpc/include/asm/debug.h index d2516308ed1e..a954e4975049 100644 --- a/arch/powerpc/include/asm/debug.h +++ b/arch/powerpc/include/asm/debug.h @@ -46,7 +46,8 @@ static inline int debugger_break_match(struct pt_regs *regs) { return 0; } static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; } #endif -int set_breakpoint(struct arch_hw_breakpoint *brk); +void set_breakpoint(struct arch_hw_breakpoint *brk); +void __set_breakpoint(struct arch_hw_breakpoint *brk); #ifdef CONFIG_PPC_ADV_DEBUG_REGS extern void do_send_trap(struct pt_regs *regs, unsigned long address, unsigned long error_code, int signal_code, int brkpt); diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index d4dd41fb951b..b76f58c124ca 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -32,6 +32,22 @@ struct device_node; #ifdef CONFIG_EEH +/* EEH subsystem flags */ +#define EEH_ENABLED 0x1 /* EEH enabled */ +#define EEH_FORCE_DISABLED 0x2 /* EEH disabled */ +#define EEH_PROBE_MODE_DEV 0x4 /* From PCI device */ +#define EEH_PROBE_MODE_DEVTREE 0x8 /* From device tree */ + +/* + * Delay for PE reset, all in ms + * + * PCI specification has reset hold time of 100 milliseconds. + * We have 250 milliseconds here. The PCI bus settlement time + * is specified as 1.5 seconds and we have 1.8 seconds. + */ +#define EEH_PE_RST_HOLD_TIME 250 +#define EEH_PE_RST_SETTLE_TIME 1800 + /* * The struct is used to trace PE related EEH functionality. * In theory, there will have one instance of the struct to @@ -53,7 +69,7 @@ struct device_node; #define EEH_PE_ISOLATED (1 << 0) /* Isolated PE */ #define EEH_PE_RECOVERING (1 << 1) /* Recovering PE */ -#define EEH_PE_PHB_DEAD (1 << 2) /* Dead PHB */ +#define EEH_PE_RESET (1 << 2) /* PE reset in progress */ #define EEH_PE_KEEP (1 << 8) /* Keep PE on hotplug */ @@ -92,6 +108,7 @@ struct eeh_pe { #define EEH_DEV_NO_HANDLER (1 << 8) /* No error handler */ #define EEH_DEV_SYSFS (1 << 9) /* Sysfs created */ +#define EEH_DEV_REMOVED (1 << 10) /* Removed permanently */ struct eeh_dev { int mode; /* EEH mode */ @@ -99,7 +116,9 @@ struct eeh_dev { int config_addr; /* Config address */ int pe_config_addr; /* PE config address */ u32 config_space[16]; /* Saved PCI config space */ - u8 pcie_cap; /* Saved PCIe capability */ + int pcix_cap; /* Saved PCIx capability */ + int pcie_cap; /* Saved PCIe capability */ + int aer_cap; /* Saved AER capability */ struct eeh_pe *pe; /* Associated PE */ struct list_head list; /* Form link list in the PE */ struct pci_controller *phb; /* Associated PHB */ @@ -171,37 +190,40 @@ struct eeh_ops { int (*restore_config)(struct device_node *dn); }; +extern int eeh_subsystem_flags; extern struct eeh_ops *eeh_ops; -extern bool eeh_subsystem_enabled; extern raw_spinlock_t confirm_error_lock; -extern int eeh_probe_mode; static inline bool eeh_enabled(void) { - return eeh_subsystem_enabled; + if ((eeh_subsystem_flags & EEH_FORCE_DISABLED) || + !(eeh_subsystem_flags & EEH_ENABLED)) + return false; + + return true; } static inline void eeh_set_enable(bool mode) { - eeh_subsystem_enabled = mode; + if (mode) + eeh_subsystem_flags |= EEH_ENABLED; + else + eeh_subsystem_flags &= ~EEH_ENABLED; } -#define EEH_PROBE_MODE_DEV (1<<0) /* From PCI device */ -#define EEH_PROBE_MODE_DEVTREE (1<<1) /* From device tree */ - static inline void eeh_probe_mode_set(int flag) { - eeh_probe_mode = flag; + eeh_subsystem_flags |= flag; } static inline int eeh_probe_mode_devtree(void) { - return (eeh_probe_mode == EEH_PROBE_MODE_DEVTREE); + return (eeh_subsystem_flags & EEH_PROBE_MODE_DEVTREE); } static inline int eeh_probe_mode_dev(void) { - return (eeh_probe_mode == EEH_PROBE_MODE_DEV); + return (eeh_subsystem_flags & EEH_PROBE_MODE_DEV); } static inline void eeh_serialize_lock(unsigned long *flags) diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index 935b5e7a1436..888d8f3f2524 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -90,6 +90,8 @@ typedef elf_vrregset_t elf_fpxregset_t; do { \ if (((ex).e_flags & 0x3) == 2) \ set_thread_flag(TIF_ELF2ABI); \ + else \ + clear_thread_flag(TIF_ELF2ABI); \ if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ set_thread_flag(TIF_32BIT); \ else \ diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h index a563d9afd179..a8b52b61043f 100644 --- a/arch/powerpc/include/asm/exception-64e.h +++ b/arch/powerpc/include/asm/exception-64e.h @@ -174,10 +174,10 @@ exc_##label##_book3e: mtlr r16; #define TLB_MISS_STATS_D(name) \ addi r9,r13,MMSTAT_DSTATS+name; \ - bl .tlb_stat_inc; + bl tlb_stat_inc; #define TLB_MISS_STATS_I(name) \ addi r9,r13,MMSTAT_ISTATS+name; \ - bl .tlb_stat_inc; + bl tlb_stat_inc; #define TLB_MISS_STATS_X(name) \ ld r8,PACA_EXTLB+EX_TLB_ESR(r13); \ cmpdi cr2,r8,-1; \ @@ -185,7 +185,7 @@ exc_##label##_book3e: addi r9,r13,MMSTAT_DSTATS+name; \ b 62f; \ 61: addi r9,r13,MMSTAT_ISTATS+name; \ -62: bl .tlb_stat_inc; +62: bl tlb_stat_inc; #define TLB_MISS_STATS_SAVE_INFO \ std r14,EX_TLB_ESR(r12); /* save ESR */ #define TLB_MISS_STATS_SAVE_INFO_BOLTED \ diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index aeaa56cd9b54..8f35cd7d59cc 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -517,7 +517,7 @@ label##_relon_hv: \ #define DISABLE_INTS RECONCILE_IRQ_STATE(r10,r11) #define ADD_NVGPRS \ - bl .save_nvgprs + bl save_nvgprs #define RUNLATCH_ON \ BEGIN_FTR_SECTION \ diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h index 169d039ed402..e3661872fbea 100644 --- a/arch/powerpc/include/asm/ftrace.h +++ b/arch/powerpc/include/asm/ftrace.h @@ -61,6 +61,7 @@ struct dyn_arch_ftrace { #endif #if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64) && !defined(__ASSEMBLY__) +#if !defined(_CALL_ELF) || _CALL_ELF != 2 #define ARCH_HAS_SYSCALL_MATCH_SYM_NAME static inline bool arch_syscall_match_sym_name(const char *sym, const char *name) { @@ -72,6 +73,7 @@ static inline bool arch_syscall_match_sym_name(const char *sym, const char *name */ return !strcmp(sym + 4, name + 3); } +#endif #endif /* CONFIG_FTRACE_SYSCALLS && CONFIG_PPC64 && !__ASSEMBLY__ */ #endif /* _ASM_POWERPC_FTRACE */ diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h index eb0f4ac75c4c..ac6432d9be46 100644 --- a/arch/powerpc/include/asm/hw_breakpoint.h +++ b/arch/powerpc/include/asm/hw_breakpoint.h @@ -79,7 +79,7 @@ static inline void hw_breakpoint_disable(void) brk.address = 0; brk.type = 0; brk.len = 0; - set_breakpoint(&brk); + __set_breakpoint(&brk); } extern void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs); diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h index f51a5580bfd0..e20eb95429a8 100644 --- a/arch/powerpc/include/asm/irqflags.h +++ b/arch/powerpc/include/asm/irqflags.h @@ -20,9 +20,9 @@ */ #define TRACE_WITH_FRAME_BUFFER(func) \ mflr r0; \ - stdu r1, -32(r1); \ + stdu r1, -STACK_FRAME_OVERHEAD(r1); \ std r0, 16(r1); \ - stdu r1, -32(r1); \ + stdu r1, -STACK_FRAME_OVERHEAD(r1); \ bl func; \ ld r1, 0(r1); \ ld r1, 0(r1); @@ -36,8 +36,8 @@ * have to call a C function so call a wrapper that saves all the * C-clobbered registers. */ -#define TRACE_ENABLE_INTS TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_on) -#define TRACE_DISABLE_INTS TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off) +#define TRACE_ENABLE_INTS TRACE_WITH_FRAME_BUFFER(trace_hardirqs_on) +#define TRACE_DISABLE_INTS TRACE_WITH_FRAME_BUFFER(trace_hardirqs_off) /* * This is used by assembly code to soft-disable interrupts first and diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h index 7b6feab6fd26..af15d4d8d604 100644 --- a/arch/powerpc/include/asm/kprobes.h +++ b/arch/powerpc/include/asm/kprobes.h @@ -30,6 +30,7 @@ #include <linux/ptrace.h> #include <linux/percpu.h> #include <asm/probes.h> +#include <asm/code-patching.h> #define __ARCH_WANT_KPROBES_INSN_SLOT @@ -56,9 +57,9 @@ typedef ppc_opcode_t kprobe_opcode_t; if ((colon = strchr(name, ':')) != NULL) { \ colon++; \ if (*colon != '\0' && *colon != '.') \ - addr = *(kprobe_opcode_t **)addr; \ + addr = (kprobe_opcode_t *)ppc_function_entry(addr); \ } else if (name[0] != '.') \ - addr = *(kprobe_opcode_t **)addr; \ + addr = (kprobe_opcode_t *)ppc_function_entry(addr); \ } else { \ char dot_name[KSYM_NAME_LEN]; \ dot_name[0] = '.'; \ diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index 4a7cc453be0b..9c89cdd067a6 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -337,6 +337,10 @@ static inline void kvmppc_fast_vcpu_kick(struct kvm_vcpu *vcpu) vcpu->kvm->arch.kvm_ops->fast_vcpu_kick(vcpu); } +extern void kvm_hv_vm_activated(void); +extern void kvm_hv_vm_deactivated(void); +extern bool kvm_hv_mode_active(void); + #else static inline void __init kvm_cma_reserve(void) {} @@ -356,6 +360,9 @@ static inline void kvmppc_fast_vcpu_kick(struct kvm_vcpu *vcpu) { kvm_vcpu_kick(vcpu); } + +static inline bool kvm_hv_mode_active(void) { return false; } + #endif #ifdef CONFIG_KVM_XICS diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h index b36f650a13ff..e3ad5c72724a 100644 --- a/arch/powerpc/include/asm/linkage.h +++ b/arch/powerpc/include/asm/linkage.h @@ -2,6 +2,7 @@ #define _ASM_POWERPC_LINKAGE_H #ifdef CONFIG_PPC64 +#if !defined(_CALL_ELF) || _CALL_ELF != 2 #define cond_syscall(x) \ asm ("\t.weak " #x "\n\t.set " #x ", sys_ni_syscall\n" \ "\t.weak ." #x "\n\t.set ." #x ", .sys_ni_syscall\n") @@ -9,5 +10,6 @@ asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \ "\t.globl ." #alias "\n\t.set ." #alias ", ." #name) #endif +#endif #endif /* _ASM_POWERPC_LINKAGE_H */ diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 5b6c03f1058f..f92b0b54e921 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -98,6 +98,9 @@ struct machdep_calls { void (*iommu_save)(void); void (*iommu_restore)(void); #endif +#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE + unsigned long (*memory_block_size)(void); +#endif #endif /* CONFIG_PPC64 */ void (*pci_dma_dev_setup)(struct pci_dev *dev); @@ -113,6 +116,8 @@ struct machdep_calls { /* Optional, may be NULL. */ void (*show_cpuinfo)(struct seq_file *m); void (*show_percpuinfo)(struct seq_file *m, int i); + /* Returns the current operating frequency of "cpu" in Hz */ + unsigned long (*get_proc_freq)(unsigned int cpu); void (*init_IRQ)(void); @@ -241,6 +246,9 @@ struct machdep_calls { /* Called during PCI resource reassignment */ resource_size_t (*pcibios_window_alignment)(struct pci_bus *, unsigned long type); + /* Reset the secondary bus of bridge */ + void (*pcibios_reset_secondary_bus)(struct pci_dev *dev); + /* Called to shutdown machine specific hardware not already controlled * by other drivers. */ diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h index 49fa55bfbac4..dcfcad139bcc 100644 --- a/arch/powerpc/include/asm/module.h +++ b/arch/powerpc/include/asm/module.h @@ -35,6 +35,7 @@ struct mod_arch_specific { #ifdef __powerpc64__ unsigned int stubs_section; /* Index of stubs section in module */ unsigned int toc_section; /* What section is the TOC? */ + bool toc_fixed; /* Have we fixed up .TOC.? */ #ifdef CONFIG_DYNAMIC_FTRACE unsigned long toc; unsigned long tramp; @@ -77,6 +78,9 @@ struct mod_arch_specific { # endif /* MODULE */ #endif +bool is_module_trampoline(u32 *insns); +int module_trampoline_target(struct module *mod, u32 *trampoline, + unsigned long *target); struct exception_table_entry; void sort_ex_table(struct exception_table_entry *start, diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 66ad7a74116f..cb15cbb51600 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -154,6 +154,7 @@ extern int opal_enter_rtas(struct rtas_args *args, #define OPAL_LPC_READ 67 #define OPAL_LPC_WRITE 68 #define OPAL_RETURN_CPU 69 +#define OPAL_REINIT_CPUS 70 #define OPAL_ELOG_READ 71 #define OPAL_ELOG_WRITE 72 #define OPAL_ELOG_ACK 73 @@ -509,7 +510,7 @@ enum OpalMemErr_DynErrType { struct OpalMemoryErrorData { enum OpalMemErr_Version version:8; /* 0x00 */ enum OpalMemErrType type:8; /* 0x01 */ - uint16_t flags; /* 0x02 */ + __be16 flags; /* 0x02 */ uint8_t reserved_1[4]; /* 0x04 */ union { @@ -517,15 +518,15 @@ struct OpalMemoryErrorData { struct { enum OpalMemErr_ResilErrType resil_err_type:8; uint8_t reserved_1[7]; - uint64_t physical_address_start; - uint64_t physical_address_end; + __be64 physical_address_start; + __be64 physical_address_end; } resilience; /* Dynamic memory deallocation error info */ struct { enum OpalMemErr_DynErrType dyn_err_type:8; uint8_t reserved_1[7]; - uint64_t physical_address_start; - uint64_t physical_address_end; + __be64 physical_address_start; + __be64 physical_address_end; } dyn_dealloc; } u; }; @@ -725,6 +726,11 @@ struct OpalIoPhb3ErrorData { uint64_t pestB[OPAL_PHB3_NUM_PEST_REGS]; }; +enum { + OPAL_REINIT_CPUS_HILE_BE = (1 << 0), + OPAL_REINIT_CPUS_HILE_LE = (1 << 1), +}; + typedef struct oppanel_line { const char * line; uint64_t line_len; @@ -849,6 +855,7 @@ int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe, uint16_t *pci_error_type, uint16_t *severity); int64_t opal_pci_poll(uint64_t phb_id); int64_t opal_return_cpu(void); +int64_t opal_reinit_cpus(uint64_t flags); int64_t opal_xscom_read(uint32_t gcid, uint64_t pcb_addr, __be64 *val); int64_t opal_xscom_write(uint32_t gcid, uint64_t pcb_addr, uint64_t val); @@ -916,6 +923,7 @@ extern void opal_get_rtc_time(struct rtc_time *tm); extern unsigned long opal_get_boot_time(void); extern void opal_nvram_init(void); extern void opal_flash_init(void); +extern void opal_flash_term_callback(void); extern int opal_elog_init(void); extern void opal_platform_dump_init(void); extern void opal_sys_param_init(void); diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index 8e956a0b6e85..bb0bd25f20d0 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -92,7 +92,10 @@ struct paca_struct { struct slb_shadow *slb_shadow_ptr; struct dtl_entry *dispatch_log; struct dtl_entry *dispatch_log_end; +#endif /* CONFIG_PPC_STD_MMU_64 */ + u64 dscr_default; /* per-CPU default DSCR */ +#ifdef CONFIG_PPC_STD_MMU_64 /* * Now, starting in cacheline 2, the exception save areas */ diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h index ed57fa7920c8..db1e2b8eff3c 100644 --- a/arch/powerpc/include/asm/ppc-pci.h +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -58,6 +58,7 @@ int rtas_write_config(struct pci_dn *, int where, int size, u32 val); int rtas_read_config(struct pci_dn *, int where, int size, u32 *val); void eeh_pe_state_mark(struct eeh_pe *pe, int state); void eeh_pe_state_clear(struct eeh_pe *pe, int state); +void eeh_pe_dev_mode_mark(struct eeh_pe *pe, int mode); void eeh_sysfs_add_device(struct pci_dev *pdev); void eeh_sysfs_remove_device(struct pci_dev *pdev); diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index cded7c1278ef..9ea266eae33e 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -57,7 +57,7 @@ BEGIN_FW_FTR_SECTION; \ LDX_BE r10,0,r10; /* get log write index */ \ cmpd cr1,r11,r10; \ beq+ cr1,33f; \ - bl .accumulate_stolen_time; \ + bl accumulate_stolen_time; \ ld r12,_MSR(r1); \ andi. r10,r12,MSR_PR; /* Restore cr0 (coming from user) */ \ 33: \ @@ -189,57 +189,53 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) #define __STK_REG(i) (112 + ((i)-14)*8) #define STK_REG(i) __STK_REG(__REG_##i) +#if defined(_CALL_ELF) && _CALL_ELF == 2 +#define STK_GOT 24 +#define __STK_PARAM(i) (32 + ((i)-3)*8) +#else +#define STK_GOT 40 #define __STK_PARAM(i) (48 + ((i)-3)*8) +#endif #define STK_PARAM(i) __STK_PARAM(__REG_##i) -#define XGLUE(a,b) a##b -#define GLUE(a,b) XGLUE(a,b) +#if defined(_CALL_ELF) && _CALL_ELF == 2 #define _GLOBAL(name) \ .section ".text"; \ .align 2 ; \ + .type name,@function; \ .globl name; \ - .globl GLUE(.,name); \ - .section ".opd","aw"; \ -name: \ - .quad GLUE(.,name); \ - .quad .TOC.@tocbase; \ - .quad 0; \ - .previous; \ - .type GLUE(.,name),@function; \ -GLUE(.,name): +name: -#define _INIT_GLOBAL(name) \ - __REF; \ +#define _GLOBAL_TOC(name) \ + .section ".text"; \ .align 2 ; \ + .type name,@function; \ .globl name; \ - .globl GLUE(.,name); \ - .section ".opd","aw"; \ name: \ - .quad GLUE(.,name); \ - .quad .TOC.@tocbase; \ - .quad 0; \ - .previous; \ - .type GLUE(.,name),@function; \ -GLUE(.,name): +0: addis r2,r12,(.TOC.-0b)@ha; \ + addi r2,r2,(.TOC.-0b)@l; \ + .localentry name,.-name #define _KPROBE(name) \ .section ".kprobes.text","a"; \ .align 2 ; \ + .type name,@function; \ .globl name; \ - .globl GLUE(.,name); \ - .section ".opd","aw"; \ -name: \ - .quad GLUE(.,name); \ - .quad .TOC.@tocbase; \ - .quad 0; \ - .previous; \ - .type GLUE(.,name),@function; \ -GLUE(.,name): +name: + +#define DOTSYM(a) a + +#else + +#define XGLUE(a,b) a##b +#define GLUE(a,b) XGLUE(a,b) -#define _STATIC(name) \ +#define _GLOBAL(name) \ .section ".text"; \ .align 2 ; \ + .globl name; \ + .globl GLUE(.,name); \ .section ".opd","aw"; \ name: \ .quad GLUE(.,name); \ @@ -249,9 +245,13 @@ name: \ .type GLUE(.,name),@function; \ GLUE(.,name): -#define _INIT_STATIC(name) \ - __REF; \ +#define _GLOBAL_TOC(name) _GLOBAL(name) + +#define _KPROBE(name) \ + .section ".kprobes.text","a"; \ .align 2 ; \ + .globl name; \ + .globl GLUE(.,name); \ .section ".opd","aw"; \ name: \ .quad GLUE(.,name); \ @@ -261,6 +261,10 @@ name: \ .type GLUE(.,name),@function; \ GLUE(.,name): +#define DOTSYM(a) GLUE(.,a) + +#endif + #else /* 32-bit */ #define _ENTRY(n) \ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index d660dc36831a..6d59072e13a7 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -449,7 +449,7 @@ extern unsigned long cpuidle_disable; enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF}; extern int powersave_nap; /* set if nap mode can be used in idle loop */ -extern void power7_nap(void); +extern void power7_nap(int check_irq); extern void power7_sleep(void); extern void flush_instruction_cache(void); extern void hard_reset_now(void); diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 4852bcf270f3..bffd89d27301 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -215,6 +215,7 @@ #define SPRN_TEXASR 0x82 /* Transaction EXception & Summary */ #define TEXASR_FS __MASK(63-36) /* Transaction Failure Summary */ #define SPRN_TEXASRU 0x83 /* '' '' '' Upper 32 */ +#define TEXASR_FS __MASK(63-36) /* TEXASR Failure Summary */ #define SPRN_TFHAR 0x80 /* Transaction Failure Handler Addr */ #define SPRN_CTRLF 0x088 #define SPRN_CTRLT 0x098 @@ -224,6 +225,7 @@ #define CTRL_TE 0x00c00000 /* thread enable */ #define CTRL_RUNLATCH 0x1 #define SPRN_DAWR 0xB4 +#define SPRN_RPR 0xBA /* Relative Priority Register */ #define SPRN_CIABR 0xBB #define CIABR_PRIV 0x3 #define CIABR_PRIV_USER 1 @@ -272,8 +274,10 @@ #define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */ #define SPRN_IC 0x350 /* Virtual Instruction Count */ #define SPRN_VTB 0x351 /* Virtual Time Base */ +#define SPRN_LDBAR 0x352 /* LD Base Address Register */ #define SPRN_PMICR 0x354 /* Power Management Idle Control Reg */ #define SPRN_PMSR 0x355 /* Power Management Status Reg */ +#define SPRN_PMMAR 0x356 /* Power Management Memory Activity Register */ #define SPRN_PMCR 0x374 /* Power Management Control Register */ /* HFSCR and FSCR bit numbers are the same */ @@ -433,6 +437,12 @@ #define HID0_BTCD (1<<1) /* Branch target cache disable */ #define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */ #define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */ +/* POWER8 HID0 bits */ +#define HID0_POWER8_4LPARMODE __MASK(61) +#define HID0_POWER8_2LPARMODE __MASK(57) +#define HID0_POWER8_1TO2LPAR __MASK(52) +#define HID0_POWER8_1TO4LPAR __MASK(51) +#define HID0_POWER8_DYNLPARDIS __MASK(48) #define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */ #ifdef CONFIG_6xx diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index 521790330672..a5e930aca804 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -50,6 +50,7 @@ static inline int overlaps_kvm_tmp(unsigned long start, unsigned long end) #endif } +#if !defined(_CALL_ELF) || _CALL_ELF != 2 #undef dereference_function_descriptor static inline void *dereference_function_descriptor(void *ptr) { @@ -60,6 +61,7 @@ static inline void *dereference_function_descriptor(void *ptr) ptr = p; return ptr; } +#endif #endif diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h index ff51046b6466..5a6614a7f0b2 100644 --- a/arch/powerpc/include/asm/smp.h +++ b/arch/powerpc/include/asm/smp.h @@ -68,14 +68,6 @@ void generic_mach_cpu_die(void); void generic_set_cpu_dead(unsigned int cpu); void generic_set_cpu_up(unsigned int cpu); int generic_check_cpu_restart(unsigned int cpu); - -extern void inhibit_secondary_onlining(void); -extern void uninhibit_secondary_onlining(void); - -#else /* HOTPLUG_CPU */ -static inline void inhibit_secondary_onlining(void) {} -static inline void uninhibit_secondary_onlining(void) {} - #endif #ifdef CONFIG_PPC64 diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h index 0dffad6bcc84..e40010abcaf1 100644 --- a/arch/powerpc/include/asm/string.h +++ b/arch/powerpc/include/asm/string.h @@ -10,9 +10,7 @@ #define __HAVE_ARCH_STRNCMP #define __HAVE_ARCH_STRCAT #define __HAVE_ARCH_MEMSET -#ifdef __BIG_ENDIAN__ #define __HAVE_ARCH_MEMCPY -#endif #define __HAVE_ARCH_MEMMOVE #define __HAVE_ARCH_MEMCMP #define __HAVE_ARCH_MEMCHR @@ -24,9 +22,7 @@ extern int strcmp(const char *,const char *); extern int strncmp(const char *, const char *, __kernel_size_t); extern char * strcat(char *, const char *); extern void * memset(void *,int,__kernel_size_t); -#ifdef __BIG_ENDIAN__ extern void * memcpy(void *,const void *,__kernel_size_t); -#endif extern void * memmove(void *,const void *,__kernel_size_t); extern int memcmp(const void *,const void *,__kernel_size_t); extern void * memchr(const void *,int,__kernel_size_t); diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index ea4dc3a89c1f..babbeca6850f 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -62,7 +62,7 @@ COMPAT_SYS_SPU(fcntl) SYSCALL(ni_syscall) SYSCALL_SPU(setpgid) SYSCALL(ni_syscall) -SYSX(sys_ni_syscall,sys_olduname, sys_olduname) +SYSX(sys_ni_syscall,sys_olduname,sys_olduname) SYSCALL_SPU(umask) SYSCALL_SPU(chroot) COMPAT_SYS(ustat) @@ -190,7 +190,7 @@ SYSCALL_SPU(getcwd) SYSCALL_SPU(capget) SYSCALL_SPU(capset) COMPAT_SYS(sigaltstack) -COMPAT_SYS_SPU(sendfile) +SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile) SYSCALL(ni_syscall) SYSCALL(ni_syscall) PPC_SYS(vfork) @@ -258,7 +258,7 @@ SYSCALL_SPU(tgkill) COMPAT_SYS_SPU(utimes) COMPAT_SYS_SPU(statfs64) COMPAT_SYS_SPU(fstatfs64) -SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64) +SYSX(sys_ni_syscall,ppc_fadvise64_64,ppc_fadvise64_64) PPC_SYS_SPU(rtas) OLDSYS(debug_setcontext) SYSCALL(ni_syscall) @@ -295,7 +295,7 @@ SYSCALL_SPU(mkdirat) SYSCALL_SPU(mknodat) SYSCALL_SPU(fchownat) COMPAT_SYS_SPU(futimesat) -SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64) +SYSX_SPU(sys_newfstatat,sys_fstatat64,sys_fstatat64) SYSCALL_SPU(unlinkat) SYSCALL_SPU(renameat) SYSCALL_SPU(linkat) diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 6c8a8c5a37a1..5f1048eaa5b6 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -16,19 +16,6 @@ struct device_node; #include <asm/mmzone.h> -static inline int cpu_to_node(int cpu) -{ - int nid; - - nid = numa_cpu_lookup_table[cpu]; - - /* - * During early boot, the numa-cpu lookup table might not have been - * setup for all CPUs yet. In such cases, default to node 0. - */ - return (nid < 0) ? 0 : nid; -} - #define parent_node(node) (node) #define cpumask_of_node(node) ((node) == -1 ? \ diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild index 48be855ef37b..7a3f795ac218 100644 --- a/arch/powerpc/include/uapi/asm/Kbuild +++ b/arch/powerpc/include/uapi/asm/Kbuild @@ -15,7 +15,6 @@ header-y += ioctls.h header-y += ipcbuf.h header-y += kvm.h header-y += kvm_para.h -header-y += linkage.h header-y += mman.h header-y += msgbuf.h header-y += nvram.h diff --git a/arch/powerpc/include/uapi/asm/elf.h b/arch/powerpc/include/uapi/asm/elf.h index 7e39c9146a71..59dad113897b 100644 --- a/arch/powerpc/include/uapi/asm/elf.h +++ b/arch/powerpc/include/uapi/asm/elf.h @@ -291,9 +291,17 @@ do { \ #define R_PPC64_DTPREL16_HIGHERA 104 /* half16 (sym+add)@dtprel@highera */ #define R_PPC64_DTPREL16_HIGHEST 105 /* half16 (sym+add)@dtprel@highest */ #define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */ +#define R_PPC64_TLSGD 107 +#define R_PPC64_TLSLD 108 +#define R_PPC64_TOCSAVE 109 + +#define R_PPC64_REL16 249 +#define R_PPC64_REL16_LO 250 +#define R_PPC64_REL16_HI 251 +#define R_PPC64_REL16_HA 252 /* Keep this the last entry. */ -#define R_PPC64_NUM 107 +#define R_PPC64_NUM 253 /* There's actually a third entry here, but it's unused */ struct ppc64_opd_entry diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 93e1465c8496..f5995a912213 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -248,6 +248,7 @@ int main(void) #endif DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id)); DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state)); + DEFINE(PACA_DSCR, offsetof(struct paca_struct, dscr_default)); DEFINE(PACA_STARTTIME, offsetof(struct paca_struct, starttime)); DEFINE(PACA_STARTTIME_USER, offsetof(struct paca_struct, starttime_user)); DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time)); diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S index cc2d8962e090..4f1393d20079 100644 --- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S @@ -94,12 +94,12 @@ _GLOBAL(setup_altivec_idle) _GLOBAL(__setup_cpu_e6500) mflr r6 #ifdef CONFIG_PPC64 - bl .setup_altivec_ivors + bl setup_altivec_ivors /* Touch IVOR42 only if the CPU supports E.HV category */ mfspr r10,SPRN_MMUCFG rlwinm. r10,r10,0,MMUCFG_LPIDSIZE beq 1f - bl .setup_lrat_ivor + bl setup_lrat_ivor 1: #endif bl setup_pw20_idle @@ -164,15 +164,15 @@ _GLOBAL(__setup_cpu_e5500) #ifdef CONFIG_PPC_BOOK3E_64 _GLOBAL(__restore_cpu_e6500) mflr r5 - bl .setup_altivec_ivors + bl setup_altivec_ivors /* Touch IVOR42 only if the CPU supports E.HV category */ mfspr r10,SPRN_MMUCFG rlwinm. r10,r10,0,MMUCFG_LPIDSIZE beq 1f - bl .setup_lrat_ivor + bl setup_lrat_ivor 1: - bl .setup_pw20_idle - bl .setup_altivec_idle + bl setup_pw20_idle + bl setup_altivec_idle bl __restore_cpu_e5500 mtlr r5 blr @@ -181,9 +181,9 @@ _GLOBAL(__restore_cpu_e5500) mflr r4 bl __e500_icache_setup bl __e500_dcache_setup - bl .__setup_base_ivors - bl .setup_perfmon_ivor - bl .setup_doorbell_ivors + bl __setup_base_ivors + bl setup_perfmon_ivor + bl setup_doorbell_ivors /* * We only want to touch IVOR38-41 if we're running on hardware * that supports category E.HV. The architectural way to determine @@ -192,7 +192,7 @@ _GLOBAL(__restore_cpu_e5500) mfspr r10,SPRN_MMUCFG rlwinm. r10,r10,0,MMUCFG_LPIDSIZE beq 1f - bl .setup_ehv_ivors + bl setup_ehv_ivors 1: mtlr r4 blr @@ -201,9 +201,9 @@ _GLOBAL(__setup_cpu_e5500) mflr r5 bl __e500_icache_setup bl __e500_dcache_setup - bl .__setup_base_ivors - bl .setup_perfmon_ivor - bl .setup_doorbell_ivors + bl __setup_base_ivors + bl setup_perfmon_ivor + bl setup_doorbell_ivors /* * We only want to touch IVOR38-41 if we're running on hardware * that supports category E.HV. The architectural way to determine @@ -212,7 +212,7 @@ _GLOBAL(__setup_cpu_e5500) mfspr r10,SPRN_MMUCFG rlwinm. r10,r10,0,MMUCFG_LPIDSIZE beq 1f - bl .setup_ehv_ivors + bl setup_ehv_ivors b 2f 1: ld r10,CPU_SPEC_FEATURES(r4) diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index e7b76a6bf150..7051ea3101b9 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -22,6 +22,7 @@ */ #include <linux/delay.h> +#include <linux/debugfs.h> #include <linux/sched.h> #include <linux/init.h> #include <linux/list.h> @@ -35,6 +36,7 @@ #include <linux/of.h> #include <linux/atomic.h> +#include <asm/debug.h> #include <asm/eeh.h> #include <asm/eeh_event.h> #include <asm/io.h> @@ -87,22 +89,21 @@ /* Time to wait for a PCI slot to report status, in milliseconds */ #define PCI_BUS_RESET_WAIT_MSEC (5*60*1000) -/* Platform dependent EEH operations */ -struct eeh_ops *eeh_ops = NULL; - -bool eeh_subsystem_enabled = false; -EXPORT_SYMBOL(eeh_subsystem_enabled); - /* - * EEH probe mode support. The intention is to support multiple - * platforms for EEH. Some platforms like pSeries do PCI emunation - * based on device tree. However, other platforms like powernv probe - * PCI devices from hardware. The flag is used to distinguish that. - * In addition, struct eeh_ops::probe would be invoked for particular - * OF node or PCI device so that the corresponding PE would be created - * there. + * EEH probe mode support, which is part of the flags, + * is to support multiple platforms for EEH. Some platforms + * like pSeries do PCI emunation based on device tree. + * However, other platforms like powernv probe PCI devices + * from hardware. The flag is used to distinguish that. + * In addition, struct eeh_ops::probe would be invoked for + * particular OF node or PCI device so that the corresponding + * PE would be created there. */ -int eeh_probe_mode; +int eeh_subsystem_flags; +EXPORT_SYMBOL(eeh_subsystem_flags); + +/* Platform dependent EEH operations */ +struct eeh_ops *eeh_ops = NULL; /* Lock to avoid races due to multiple reports of an error */ DEFINE_RAW_SPINLOCK(confirm_error_lock); @@ -133,6 +134,15 @@ static struct eeh_stats eeh_stats; #define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE) +static int __init eeh_setup(char *str) +{ + if (!strcmp(str, "off")) + eeh_subsystem_flags |= EEH_FORCE_DISABLED; + + return 1; +} +__setup("eeh=", eeh_setup); + /** * eeh_gather_pci_data - Copy assorted PCI config space registers to buff * @edev: device to report data for @@ -145,73 +155,67 @@ static struct eeh_stats eeh_stats; static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len) { struct device_node *dn = eeh_dev_to_of_node(edev); - struct pci_dev *dev = eeh_dev_to_pci_dev(edev); u32 cfg; int cap, i; int n = 0; n += scnprintf(buf+n, len-n, "%s\n", dn->full_name); - printk(KERN_WARNING "EEH: of node=%s\n", dn->full_name); + pr_warn("EEH: of node=%s\n", dn->full_name); eeh_ops->read_config(dn, PCI_VENDOR_ID, 4, &cfg); n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg); - printk(KERN_WARNING "EEH: PCI device/vendor: %08x\n", cfg); + pr_warn("EEH: PCI device/vendor: %08x\n", cfg); eeh_ops->read_config(dn, PCI_COMMAND, 4, &cfg); n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg); - printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg); - - if (!dev) { - printk(KERN_WARNING "EEH: no PCI device for this of node\n"); - return n; - } + pr_warn("EEH: PCI cmd/status register: %08x\n", cfg); /* Gather bridge-specific registers */ - if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) { + if (edev->mode & EEH_DEV_BRIDGE) { eeh_ops->read_config(dn, PCI_SEC_STATUS, 2, &cfg); n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg); - printk(KERN_WARNING "EEH: Bridge secondary status: %04x\n", cfg); + pr_warn("EEH: Bridge secondary status: %04x\n", cfg); eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &cfg); n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg); - printk(KERN_WARNING "EEH: Bridge control: %04x\n", cfg); + pr_warn("EEH: Bridge control: %04x\n", cfg); } /* Dump out the PCI-X command and status regs */ - cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); + cap = edev->pcix_cap; if (cap) { eeh_ops->read_config(dn, cap, 4, &cfg); n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg); - printk(KERN_WARNING "EEH: PCI-X cmd: %08x\n", cfg); + pr_warn("EEH: PCI-X cmd: %08x\n", cfg); eeh_ops->read_config(dn, cap+4, 4, &cfg); n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg); - printk(KERN_WARNING "EEH: PCI-X status: %08x\n", cfg); + pr_warn("EEH: PCI-X status: %08x\n", cfg); } - /* If PCI-E capable, dump PCI-E cap 10, and the AER */ - if (pci_is_pcie(dev)) { + /* If PCI-E capable, dump PCI-E cap 10 */ + cap = edev->pcie_cap; + if (cap) { n += scnprintf(buf+n, len-n, "pci-e cap10:\n"); - printk(KERN_WARNING - "EEH: PCI-E capabilities and status follow:\n"); + pr_warn("EEH: PCI-E capabilities and status follow:\n"); for (i=0; i<=8; i++) { - eeh_ops->read_config(dn, dev->pcie_cap+4*i, 4, &cfg); + eeh_ops->read_config(dn, cap+4*i, 4, &cfg); n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg); - printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg); + pr_warn("EEH: PCI-E %02x: %08x\n", i, cfg); } + } - cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); - if (cap) { - n += scnprintf(buf+n, len-n, "pci-e AER:\n"); - printk(KERN_WARNING - "EEH: PCI-E AER capability register set follows:\n"); - - for (i=0; i<14; i++) { - eeh_ops->read_config(dn, cap+4*i, 4, &cfg); - n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg); - printk(KERN_WARNING "EEH: PCI-E AER %02x: %08x\n", i, cfg); - } + /* If AER capable, dump it */ + cap = edev->aer_cap; + if (cap) { + n += scnprintf(buf+n, len-n, "pci-e AER:\n"); + pr_warn("EEH: PCI-E AER capability register set follows:\n"); + + for (i=0; i<14; i++) { + eeh_ops->read_config(dn, cap+4*i, 4, &cfg); + n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg); + pr_warn("EEH: PCI-E AER %02x: %08x\n", i, cfg); } } @@ -232,21 +236,19 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity) { size_t loglen = 0; struct eeh_dev *edev, *tmp; - bool valid_cfg_log = true; /* * When the PHB is fenced or dead, it's pointless to collect * the data from PCI config space because it should return * 0xFF's. For ER, we still retrieve the data from the PCI * config space. + * + * For pHyp, we have to enable IO for log retrieval. Otherwise, + * 0xFF's is always returned from PCI config space. */ - if (eeh_probe_mode_dev() && - (pe->type & EEH_PE_PHB) && - (pe->state & (EEH_PE_ISOLATED | EEH_PE_PHB_DEAD))) - valid_cfg_log = false; - - if (valid_cfg_log) { - eeh_pci_enable(pe, EEH_OPT_THAW_MMIO); + if (!(pe->type & EEH_PE_PHB)) { + if (eeh_probe_mode_devtree()) + eeh_pci_enable(pe, EEH_OPT_THAW_MMIO); eeh_ops->configure_bridge(pe); eeh_pe_restore_bars(pe); @@ -309,7 +311,7 @@ static int eeh_phb_check_failure(struct eeh_pe *pe) /* If the PHB has been in problematic state */ eeh_serialize_lock(&flags); - if (phb_pe->state & (EEH_PE_ISOLATED | EEH_PE_PHB_DEAD)) { + if (phb_pe->state & EEH_PE_ISOLATED) { ret = 0; goto out; } @@ -515,16 +517,42 @@ EXPORT_SYMBOL(eeh_check_failure); */ int eeh_pci_enable(struct eeh_pe *pe, int function) { - int rc; + int rc, flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE); + + /* + * pHyp doesn't allow to enable IO or DMA on unfrozen PE. + * Also, it's pointless to enable them on unfrozen PE. So + * we have the check here. + */ + if (function == EEH_OPT_THAW_MMIO || + function == EEH_OPT_THAW_DMA) { + rc = eeh_ops->get_state(pe, NULL); + if (rc < 0) + return rc; + + /* Needn't to enable or already enabled */ + if ((rc == EEH_STATE_NOT_SUPPORT) || + ((rc & flags) == flags)) + return 0; + } rc = eeh_ops->set_option(pe, function); if (rc) - pr_warning("%s: Unexpected state change %d on PHB#%d-PE#%x, err=%d\n", - __func__, function, pe->phb->global_number, pe->addr, rc); + pr_warn("%s: Unexpected state change %d on " + "PHB#%d-PE#%x, err=%d\n", + __func__, function, pe->phb->global_number, + pe->addr, rc); rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC); - if (rc > 0 && (rc & EEH_STATE_MMIO_ENABLED) && - (function == EEH_OPT_THAW_MMIO)) + if (rc <= 0) + return rc; + + if ((function == EEH_OPT_THAW_MMIO) && + (rc & EEH_STATE_MMIO_ENABLED)) + return 0; + + if ((function == EEH_OPT_THAW_DMA) && + (rc & EEH_STATE_DMA_ENABLED)) return 0; return rc; @@ -612,26 +640,7 @@ static void eeh_reset_pe_once(struct eeh_pe *pe) else eeh_ops->reset(pe, EEH_RESET_HOT); - /* The PCI bus requires that the reset be held high for at least - * a 100 milliseconds. We wait a bit longer 'just in case'. - */ -#define PCI_BUS_RST_HOLD_TIME_MSEC 250 - msleep(PCI_BUS_RST_HOLD_TIME_MSEC); - - /* We might get hit with another EEH freeze as soon as the - * pci slot reset line is dropped. Make sure we don't miss - * these, and clear the flag now. - */ - eeh_pe_state_clear(pe, EEH_PE_ISOLATED); - eeh_ops->reset(pe, EEH_RESET_DEACTIVATE); - - /* After a PCI slot has been reset, the PCI Express spec requires - * a 1.5 second idle time for the bus to stabilize, before starting - * up traffic. - */ -#define PCI_BUS_SETTLE_TIME_MSEC 1800 - msleep(PCI_BUS_SETTLE_TIME_MSEC); } /** @@ -651,6 +660,10 @@ int eeh_reset_pe(struct eeh_pe *pe) for (i=0; i<3; i++) { eeh_reset_pe_once(pe); + /* + * EEH_PE_ISOLATED is expected to be removed after + * BAR restore. + */ rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC); if ((rc & flags) == flags) return 0; @@ -826,8 +839,8 @@ int eeh_init(void) &hose_list, list_node) pci_walk_bus(hose->bus, eeh_ops->dev_probe, NULL); } else { - pr_warning("%s: Invalid probe mode %d\n", - __func__, eeh_probe_mode); + pr_warn("%s: Invalid probe mode %x", + __func__, eeh_subsystem_flags); return -EINVAL; } @@ -1102,10 +1115,45 @@ static const struct file_operations proc_eeh_operations = { .release = single_release, }; +#ifdef CONFIG_DEBUG_FS +static int eeh_enable_dbgfs_set(void *data, u64 val) +{ + if (val) + eeh_subsystem_flags &= ~EEH_FORCE_DISABLED; + else + eeh_subsystem_flags |= EEH_FORCE_DISABLED; + + /* Notify the backend */ + if (eeh_ops->post_init) + eeh_ops->post_init(); + + return 0; +} + +static int eeh_enable_dbgfs_get(void *data, u64 *val) +{ + if (eeh_enabled()) + *val = 0x1ul; + else + *val = 0x0ul; + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(eeh_enable_dbgfs_ops, eeh_enable_dbgfs_get, + eeh_enable_dbgfs_set, "0x%llx\n"); +#endif + static int __init eeh_init_proc(void) { - if (machine_is(pseries) || machine_is(powernv)) + if (machine_is(pseries) || machine_is(powernv)) { proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations); +#ifdef CONFIG_DEBUG_FS + debugfs_create_file("eeh_enable", 0600, + powerpc_debugfs_root, NULL, + &eeh_enable_dbgfs_ops); +#endif + } + return 0; } __initcall(eeh_init_proc); diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index bb61ca58ca6d..7100a5b96e70 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -171,6 +171,15 @@ static void eeh_enable_irq(struct pci_dev *dev) } } +static bool eeh_dev_removed(struct eeh_dev *edev) +{ + /* EEH device removed ? */ + if (!edev || (edev->mode & EEH_DEV_REMOVED)) + return true; + + return false; +} + /** * eeh_report_error - Report pci error to each device driver * @data: eeh device @@ -187,10 +196,8 @@ static void *eeh_report_error(void *data, void *userdata) enum pci_ers_result rc, *res = userdata; struct pci_driver *driver; - /* We might not have the associated PCI device, - * then we should continue for next one. - */ - if (!dev) return NULL; + if (!dev || eeh_dev_removed(edev)) + return NULL; dev->error_state = pci_channel_io_frozen; driver = eeh_pcid_get(dev); @@ -230,6 +237,9 @@ static void *eeh_report_mmio_enabled(void *data, void *userdata) enum pci_ers_result rc, *res = userdata; struct pci_driver *driver; + if (!dev || eeh_dev_removed(edev)) + return NULL; + driver = eeh_pcid_get(dev); if (!driver) return NULL; @@ -267,7 +277,8 @@ static void *eeh_report_reset(void *data, void *userdata) enum pci_ers_result rc, *res = userdata; struct pci_driver *driver; - if (!dev) return NULL; + if (!dev || eeh_dev_removed(edev)) + return NULL; dev->error_state = pci_channel_io_normal; driver = eeh_pcid_get(dev); @@ -307,7 +318,8 @@ static void *eeh_report_resume(void *data, void *userdata) struct pci_dev *dev = eeh_dev_to_pci_dev(edev); struct pci_driver *driver; - if (!dev) return NULL; + if (!dev || eeh_dev_removed(edev)) + return NULL; dev->error_state = pci_channel_io_normal; driver = eeh_pcid_get(dev); @@ -343,7 +355,8 @@ static void *eeh_report_failure(void *data, void *userdata) struct pci_dev *dev = eeh_dev_to_pci_dev(edev); struct pci_driver *driver; - if (!dev) return NULL; + if (!dev || eeh_dev_removed(edev)) + return NULL; dev->error_state = pci_channel_io_perm_failure; driver = eeh_pcid_get(dev); @@ -380,6 +393,16 @@ static void *eeh_rmv_device(void *data, void *userdata) if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE)) return NULL; + /* + * We rely on count-based pcibios_release_device() to + * detach permanently offlined PEs. Unfortunately, that's + * not reliable enough. We might have the permanently + * offlined PEs attached, but we needn't take care of + * them and their child devices. + */ + if (eeh_dev_removed(edev)) + return NULL; + driver = eeh_pcid_get(dev); if (driver) { eeh_pcid_put(dev); @@ -417,6 +440,36 @@ static void *eeh_pe_detach_dev(void *data, void *userdata) return NULL; } +/* + * Explicitly clear PE's frozen state for PowerNV where + * we have frozen PE until BAR restore is completed. It's + * harmless to clear it for pSeries. To be consistent with + * PE reset (for 3 times), we try to clear the frozen state + * for 3 times as well. + */ +static int eeh_clear_pe_frozen_state(struct eeh_pe *pe) +{ + int i, rc; + + for (i = 0; i < 3; i++) { + rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO); + if (rc) + continue; + rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA); + if (!rc) + break; + } + + /* The PE has been isolated, clear it */ + if (rc) + pr_warn("%s: Can't clear frozen PHB#%x-PE#%x (%d)\n", + __func__, pe->phb->global_number, pe->addr, rc); + else + eeh_pe_state_clear(pe, EEH_PE_ISOLATED); + + return rc; +} + /** * eeh_reset_device - Perform actual reset of a pci slot * @pe: EEH PE @@ -451,19 +504,33 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed); } - /* Reset the pci controller. (Asserts RST#; resets config space). + /* + * Reset the pci controller. (Asserts RST#; resets config space). * Reconfigure bridges and devices. Don't try to bring the system * up if the reset failed for some reason. + * + * During the reset, it's very dangerous to have uncontrolled PCI + * config accesses. So we prefer to block them. However, controlled + * PCI config accesses initiated from EEH itself are allowed. */ + eeh_pe_state_mark(pe, EEH_PE_RESET); rc = eeh_reset_pe(pe); - if (rc) + if (rc) { + eeh_pe_state_clear(pe, EEH_PE_RESET); return rc; + } pci_lock_rescan_remove(); /* Restore PE */ eeh_ops->configure_bridge(pe); eeh_pe_restore_bars(pe); + eeh_pe_state_clear(pe, EEH_PE_RESET); + + /* Clear frozen state */ + rc = eeh_clear_pe_frozen_state(pe); + if (rc) + return rc; /* Give the system 5 seconds to finish running the user-space * hotplug shutdown scripts, e.g. ifdown for ethernet. Yes, @@ -573,7 +640,6 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) result = PCI_ERS_RESULT_NEED_RESET; } else { pr_info("EEH: Notify device drivers to resume I/O\n"); - result = PCI_ERS_RESULT_NONE; eeh_pe_dev_traverse(pe, eeh_report_mmio_enabled, &result); } } @@ -585,10 +651,17 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) if (rc < 0) goto hard_fail; - if (rc) + if (rc) { result = PCI_ERS_RESULT_NEED_RESET; - else + } else { + /* + * We didn't do PE reset for the case. The PE + * is still in frozen state. Clear it before + * resuming the PE. + */ + eeh_pe_state_clear(pe, EEH_PE_ISOLATED); result = PCI_ERS_RESULT_RECOVERED; + } } /* If any device has a hard failure, then shut off everything. */ @@ -650,8 +723,17 @@ perm_error: /* Notify all devices that they're about to go down. */ eeh_pe_dev_traverse(pe, eeh_report_failure, NULL); - /* Shut down the device drivers for good. */ + /* Mark the PE to be removed permanently */ + pe->freeze_count = EEH_MAX_ALLOWED_FREEZES + 1; + + /* + * Shut down the device drivers for good. We mark + * all removed devices correctly to avoid access + * the their PCI config any more. + */ if (frozen_bus) { + eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); + pci_lock_rescan_remove(); pcibios_remove_pci_devices(frozen_bus); pci_unlock_rescan_remove(); @@ -682,8 +764,7 @@ static void eeh_handle_special_event(void) phb_pe = eeh_phb_pe_get(hose); if (!phb_pe) continue; - eeh_pe_state_mark(phb_pe, - EEH_PE_ISOLATED | EEH_PE_PHB_DEAD); + eeh_pe_state_mark(phb_pe, EEH_PE_ISOLATED); } eeh_serialize_unlock(flags); @@ -699,8 +780,7 @@ static void eeh_handle_special_event(void) eeh_remove_event(pe); if (rc == EEH_NEXT_ERR_DEAD_PHB) - eeh_pe_state_mark(pe, - EEH_PE_ISOLATED | EEH_PE_PHB_DEAD); + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); else eeh_pe_state_mark(pe, EEH_PE_ISOLATED | EEH_PE_RECOVERING); @@ -724,12 +804,14 @@ static void eeh_handle_special_event(void) if (rc == EEH_NEXT_ERR_FROZEN_PE || rc == EEH_NEXT_ERR_FENCED_PHB) { eeh_handle_normal_event(pe); + eeh_pe_state_clear(pe, EEH_PE_RECOVERING); } else { pci_lock_rescan_remove(); list_for_each_entry(hose, &hose_list, list_node) { phb_pe = eeh_phb_pe_get(hose); if (!phb_pe || - !(phb_pe->state & EEH_PE_PHB_DEAD)) + !(phb_pe->state & EEH_PE_ISOLATED) || + (phb_pe->state & EEH_PE_RECOVERING)) continue; /* Notify all devices to be down */ diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c index f0c353fa655a..995c2a284630 100644 --- a/arch/powerpc/kernel/eeh_pe.c +++ b/arch/powerpc/kernel/eeh_pe.c @@ -503,13 +503,17 @@ static void *__eeh_pe_state_mark(void *data, void *flag) struct eeh_dev *edev, *tmp; struct pci_dev *pdev; - /* - * Mark the PE with the indicated state. Also, - * the associated PCI device will be put into - * I/O frozen state to avoid I/O accesses from - * the PCI device driver. - */ + /* Keep the state of permanently removed PE intact */ + if ((pe->freeze_count > EEH_MAX_ALLOWED_FREEZES) && + (state & (EEH_PE_ISOLATED | EEH_PE_RECOVERING))) + return NULL; + pe->state |= state; + + /* Offline PCI devices if applicable */ + if (state != EEH_PE_ISOLATED) + return NULL; + eeh_pe_for_each_dev(pe, edev, tmp) { pdev = eeh_dev_to_pci_dev(edev); if (pdev) @@ -532,6 +536,27 @@ void eeh_pe_state_mark(struct eeh_pe *pe, int state) eeh_pe_traverse(pe, __eeh_pe_state_mark, &state); } +static void *__eeh_pe_dev_mode_mark(void *data, void *flag) +{ + struct eeh_dev *edev = data; + int mode = *((int *)flag); + + edev->mode |= mode; + + return NULL; +} + +/** + * eeh_pe_dev_state_mark - Mark state for all device under the PE + * @pe: EEH PE + * + * Mark specific state for all child devices of the PE. + */ +void eeh_pe_dev_mode_mark(struct eeh_pe *pe, int mode) +{ + eeh_pe_dev_traverse(pe, __eeh_pe_dev_mode_mark, &mode); +} + /** * __eeh_pe_state_clear - Clear state for the PE * @data: EEH PE @@ -546,8 +571,16 @@ static void *__eeh_pe_state_clear(void *data, void *flag) struct eeh_pe *pe = (struct eeh_pe *)data; int state = *((int *)flag); + /* Keep the state of permanently removed PE intact */ + if ((pe->freeze_count > EEH_MAX_ALLOWED_FREEZES) && + (state & EEH_PE_ISOLATED)) + return NULL; + pe->state &= ~state; - pe->check_count = 0; + + /* Clear check count since last isolation */ + if (state & EEH_PE_ISOLATED) + pe->check_count = 0; return NULL; } diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c index 5d753d4f2c75..e2595ba4b720 100644 --- a/arch/powerpc/kernel/eeh_sysfs.c +++ b/arch/powerpc/kernel/eeh_sysfs.c @@ -59,6 +59,9 @@ void eeh_sysfs_add_device(struct pci_dev *pdev) struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev); int rc=0; + if (!eeh_enabled()) + return; + if (edev && (edev->mode & EEH_DEV_SYSFS)) return; diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 662c6dd98072..911d45366f59 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -39,8 +39,8 @@ * System calls. */ .section ".toc","aw" -.SYS_CALL_TABLE: - .tc .sys_call_table[TC],.sys_call_table +SYS_CALL_TABLE: + .tc sys_call_table[TC],sys_call_table /* This value is used to mark exception frames on the stack. */ exception_marker: @@ -106,7 +106,7 @@ BEGIN_FW_FTR_SECTION LDX_BE r10,0,r10 /* get log write index */ cmpd cr1,r11,r10 beq+ cr1,33f - bl .accumulate_stolen_time + bl accumulate_stolen_time REST_GPR(0,r1) REST_4GPRS(3,r1) REST_2GPRS(7,r1) @@ -143,7 +143,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) std r10,SOFTE(r1) #ifdef SHOW_SYSCALLS - bl .do_show_syscall + bl do_show_syscall REST_GPR(0,r1) REST_4GPRS(3,r1) REST_2GPRS(7,r1) @@ -162,7 +162,7 @@ system_call: /* label this so stack traces look sane */ * Need to vector to 32 Bit or default sys_call_table here, * based on caller's run-mode / personality. */ - ld r11,.SYS_CALL_TABLE@toc(2) + ld r11,SYS_CALL_TABLE@toc(2) andi. r10,r10,_TIF_32BIT beq 15f addi r11,r11,8 /* use 32-bit syscall entries */ @@ -174,14 +174,14 @@ system_call: /* label this so stack traces look sane */ clrldi r8,r8,32 15: slwi r0,r0,4 - ldx r10,r11,r0 /* Fetch system call handler [ptr] */ - mtctr r10 + ldx r12,r11,r0 /* Fetch system call handler [ptr] */ + mtctr r12 bctrl /* Call handler */ syscall_exit: std r3,RESULT(r1) #ifdef SHOW_SYSCALLS - bl .do_show_syscall_exit + bl do_show_syscall_exit ld r3,RESULT(r1) #endif CURRENT_THREAD_INFO(r12, r1) @@ -248,9 +248,9 @@ syscall_error: /* Traced system call support */ syscall_dotrace: - bl .save_nvgprs + bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_syscall_trace_enter + bl do_syscall_trace_enter /* * Restore argument registers possibly just changed. * We use the return value of do_syscall_trace_enter @@ -308,7 +308,7 @@ syscall_exit_work: 4: /* Anything else left to do? */ SET_DEFAULT_THREAD_PPR(r3, r10) /* Set thread.ppr = 3 */ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) - beq .ret_from_except_lite + beq ret_from_except_lite /* Re-enable interrupts */ #ifdef CONFIG_PPC_BOOK3E @@ -319,10 +319,10 @@ syscall_exit_work: mtmsrd r10,1 #endif /* CONFIG_PPC_BOOK3E */ - bl .save_nvgprs + bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_syscall_trace_leave - b .ret_from_except + bl do_syscall_trace_leave + b ret_from_except /* Save non-volatile GPRs, if not already saved. */ _GLOBAL(save_nvgprs) @@ -345,52 +345,48 @@ _GLOBAL(save_nvgprs) */ _GLOBAL(ppc_fork) - bl .save_nvgprs - bl .sys_fork + bl save_nvgprs + bl sys_fork b syscall_exit _GLOBAL(ppc_vfork) - bl .save_nvgprs - bl .sys_vfork + bl save_nvgprs + bl sys_vfork b syscall_exit _GLOBAL(ppc_clone) - bl .save_nvgprs - bl .sys_clone + bl save_nvgprs + bl sys_clone b syscall_exit _GLOBAL(ppc32_swapcontext) - bl .save_nvgprs - bl .compat_sys_swapcontext + bl save_nvgprs + bl compat_sys_swapcontext b syscall_exit _GLOBAL(ppc64_swapcontext) - bl .save_nvgprs - bl .sys_swapcontext + bl save_nvgprs + bl sys_swapcontext b syscall_exit _GLOBAL(ret_from_fork) - bl .schedule_tail + bl schedule_tail REST_NVGPRS(r1) li r3,0 b syscall_exit _GLOBAL(ret_from_kernel_thread) - bl .schedule_tail + bl schedule_tail REST_NVGPRS(r1) - ld r14, 0(r14) mtlr r14 mr r3,r15 +#if defined(_CALL_ELF) && _CALL_ELF == 2 + mr r12,r14 +#endif blrl li r3,0 b syscall_exit - .section ".toc","aw" -DSCR_DEFAULT: - .tc dscr_default[TC],dscr_default - - .section ".text" - /* * This routine switches between two different tasks. The process * state of one is saved on its kernel stack. Then the state @@ -575,11 +571,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #ifdef CONFIG_PPC64 BEGIN_FTR_SECTION lwz r6,THREAD_DSCR_INHERIT(r4) - ld r7,DSCR_DEFAULT@toc(2) ld r0,THREAD_DSCR(r4) cmpwi r6,0 bne 1f - ld r0,0(r7) + ld r0,PACA_DSCR(r13) 1: BEGIN_FTR_SECTION_NESTED(70) mfspr r8, SPRN_FSCR @@ -611,7 +606,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_DSCR) _GLOBAL(ret_from_except) ld r11,_TRAP(r1) andi. r0,r11,1 - bne .ret_from_except_lite + bne ret_from_except_lite REST_NVGPRS(r1) _GLOBAL(ret_from_except_lite) @@ -661,23 +656,23 @@ _GLOBAL(ret_from_except_lite) #endif 1: andi. r0,r4,_TIF_NEED_RESCHED beq 2f - bl .restore_interrupts + bl restore_interrupts SCHEDULE_USER - b .ret_from_except_lite + b ret_from_except_lite 2: #ifdef CONFIG_PPC_TRANSACTIONAL_MEM andi. r0,r4,_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM bne 3f /* only restore TM if nothing else to do */ addi r3,r1,STACK_FRAME_OVERHEAD - bl .restore_tm_state + bl restore_tm_state b restore 3: #endif - bl .save_nvgprs - bl .restore_interrupts + bl save_nvgprs + bl restore_interrupts addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_notify_resume - b .ret_from_except + bl do_notify_resume + b ret_from_except resume_kernel: /* check current_thread_info, _TIF_EMULATE_STACK_STORE */ @@ -730,7 +725,7 @@ resume_kernel: * sure we are soft-disabled first and reconcile irq state. */ RECONCILE_IRQ_STATE(r3,r4) -1: bl .preempt_schedule_irq +1: bl preempt_schedule_irq /* Re-test flags and eventually loop */ CURRENT_THREAD_INFO(r9, r1) @@ -792,7 +787,7 @@ restore_no_replay: */ do_restore: #ifdef CONFIG_PPC_BOOK3E - b .exception_return_book3e + b exception_return_book3e #else /* * Clear the reservation. If we know the CPU tracks the address of @@ -907,7 +902,7 @@ restore_check_irq_replay: * * Still, this might be useful for things like hash_page */ - bl .__check_irq_replay + bl __check_irq_replay cmpwi cr0,r3,0 beq restore_no_replay @@ -928,13 +923,13 @@ restore_check_irq_replay: cmpwi cr0,r3,0x500 bne 1f addi r3,r1,STACK_FRAME_OVERHEAD; - bl .do_IRQ - b .ret_from_except + bl do_IRQ + b ret_from_except 1: cmpwi cr0,r3,0x900 bne 1f addi r3,r1,STACK_FRAME_OVERHEAD; - bl .timer_interrupt - b .ret_from_except + bl timer_interrupt + b ret_from_except #ifdef CONFIG_PPC_DOORBELL 1: #ifdef CONFIG_PPC_BOOK3E @@ -948,14 +943,14 @@ restore_check_irq_replay: #endif /* CONFIG_PPC_BOOK3E */ bne 1f addi r3,r1,STACK_FRAME_OVERHEAD; - bl .doorbell_exception - b .ret_from_except + bl doorbell_exception + b ret_from_except #endif /* CONFIG_PPC_DOORBELL */ -1: b .ret_from_except /* What else to do here ? */ +1: b ret_from_except /* What else to do here ? */ unrecov_restore: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception + bl unrecoverable_exception b unrecov_restore #ifdef CONFIG_PPC_RTAS @@ -1021,7 +1016,7 @@ _GLOBAL(enter_rtas) std r6,PACASAVEDMSR(r13) /* Setup our real return addr */ - LOAD_REG_ADDR(r4,.rtas_return_loc) + LOAD_REG_ADDR(r4,rtas_return_loc) clrldi r4,r4,2 /* convert to realmode address */ mtlr r4 @@ -1045,7 +1040,7 @@ _GLOBAL(enter_rtas) rfid b . /* prevent speculative execution */ -_STATIC(rtas_return_loc) +rtas_return_loc: FIXUP_ENDIAN /* relocation is off at this point */ @@ -1054,7 +1049,7 @@ _STATIC(rtas_return_loc) bcl 20,31,$+4 0: mflr r3 - ld r3,(1f-0b)(r3) /* get &.rtas_restore_regs */ + ld r3,(1f-0b)(r3) /* get &rtas_restore_regs */ mfmsr r6 li r0,MSR_RI @@ -1071,9 +1066,9 @@ _STATIC(rtas_return_loc) b . /* prevent speculative execution */ .align 3 -1: .llong .rtas_restore_regs +1: .llong rtas_restore_regs -_STATIC(rtas_restore_regs) +rtas_restore_regs: /* relocation is on at this point */ REST_GPR(2, r1) /* Restore the TOC */ REST_GPR(13, r1) /* Restore paca */ @@ -1173,7 +1168,7 @@ _GLOBAL(mcount) _GLOBAL(_mcount) blr -_GLOBAL(ftrace_caller) +_GLOBAL_TOC(ftrace_caller) /* Taken from output of objdump from lib64/glibc */ mflr r3 ld r11, 0(r1) @@ -1197,10 +1192,7 @@ _GLOBAL(ftrace_graph_stub) _GLOBAL(ftrace_stub) blr #else -_GLOBAL(mcount) - blr - -_GLOBAL(_mcount) +_GLOBAL_TOC(_mcount) /* Taken from output of objdump from lib64/glibc */ mflr r3 ld r11, 0(r1) @@ -1238,7 +1230,7 @@ _GLOBAL(ftrace_graph_caller) ld r11, 112(r1) addi r3, r11, 16 - bl .prepare_ftrace_return + bl prepare_ftrace_return nop ld r0, 128(r1) @@ -1254,7 +1246,7 @@ _GLOBAL(return_to_handler) mr r31, r1 stdu r1, -112(r1) - bl .ftrace_return_to_handler + bl ftrace_return_to_handler nop /* return value has real return address */ @@ -1284,7 +1276,7 @@ _GLOBAL(mod_return_to_handler) */ ld r2, PACATOC(r13) - bl .ftrace_return_to_handler + bl ftrace_return_to_handler nop /* return value has real return address */ diff --git a/arch/powerpc/kernel/epapr_paravirt.c b/arch/powerpc/kernel/epapr_paravirt.c index 60d1a2259dbe..59e4ba74975d 100644 --- a/arch/powerpc/kernel/epapr_paravirt.c +++ b/arch/powerpc/kernel/epapr_paravirt.c @@ -30,6 +30,7 @@ extern u32 epapr_ev_idle_start[]; #endif bool epapr_paravirt_enabled; +static bool __maybe_unused epapr_has_idle; static int __init early_init_dt_scan_epapr(unsigned long node, const char *uname, @@ -56,7 +57,7 @@ static int __init early_init_dt_scan_epapr(unsigned long node, #if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64) if (of_get_flat_dt_prop(node, "has-idle", NULL)) - ppc_md.power_save = epapr_ev_idle; + epapr_has_idle = true; #endif epapr_paravirt_enabled = true; @@ -71,3 +72,14 @@ int __init epapr_paravirt_early_init(void) return 0; } +static int __init epapr_idle_init(void) +{ +#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64) + if (epapr_has_idle) + ppc_md.power_save = epapr_ev_idle; +#endif + + return 0; +} + +postcore_initcall(epapr_idle_init); diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index c1bee3ce9d1f..771b4e92e5d9 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -499,7 +499,7 @@ exc_##n##_bad_stack: \ CHECK_NAPPING(); \ addi r3,r1,STACK_FRAME_OVERHEAD; \ bl hdlr; \ - b .ret_from_except_lite; + b ret_from_except_lite; /* This value is used to mark exception frames on the stack. */ .section ".toc","aw" @@ -550,11 +550,11 @@ interrupt_end_book3e: CRIT_EXCEPTION_PROLOG(0x100, BOOKE_INTERRUPT_CRITICAL, PROLOG_ADDITION_NONE) EXCEPTION_COMMON_CRIT(0x100) - bl .save_nvgprs + bl save_nvgprs bl special_reg_save CHECK_NAPPING(); addi r3,r1,STACK_FRAME_OVERHEAD - bl .unknown_exception + bl unknown_exception b ret_from_crit_except /* Machine Check Interrupt */ @@ -562,11 +562,11 @@ interrupt_end_book3e: MC_EXCEPTION_PROLOG(0x000, BOOKE_INTERRUPT_MACHINE_CHECK, PROLOG_ADDITION_NONE) EXCEPTION_COMMON_MC(0x000) - bl .save_nvgprs + bl save_nvgprs bl special_reg_save CHECK_NAPPING(); addi r3,r1,STACK_FRAME_OVERHEAD - bl .machine_check_exception + bl machine_check_exception b ret_from_mc_except /* Data Storage Interrupt */ @@ -591,7 +591,7 @@ interrupt_end_book3e: /* External Input Interrupt */ MASKABLE_EXCEPTION(0x500, BOOKE_INTERRUPT_EXTERNAL, - external_input, .do_IRQ, ACK_NONE) + external_input, do_IRQ, ACK_NONE) /* Alignment */ START_EXCEPTION(alignment); @@ -612,9 +612,9 @@ interrupt_end_book3e: std r14,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD ld r14,PACA_EXGEN+EX_R14(r13) - bl .save_nvgprs - bl .program_check_exception - b .ret_from_except + bl save_nvgprs + bl program_check_exception + b ret_from_except /* Floating Point Unavailable Interrupt */ START_EXCEPTION(fp_unavailable); @@ -625,13 +625,13 @@ interrupt_end_book3e: ld r12,_MSR(r1) andi. r0,r12,MSR_PR; beq- 1f - bl .load_up_fpu + bl load_up_fpu b fast_exception_return 1: INTS_DISABLE - bl .save_nvgprs + bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD - bl .kernel_fp_unavailable_exception - b .ret_from_except + bl kernel_fp_unavailable_exception + b ret_from_except /* Altivec Unavailable Interrupt */ START_EXCEPTION(altivec_unavailable); @@ -644,16 +644,16 @@ BEGIN_FTR_SECTION ld r12,_MSR(r1) andi. r0,r12,MSR_PR; beq- 1f - bl .load_up_altivec + bl load_up_altivec b fast_exception_return 1: END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif INTS_DISABLE - bl .save_nvgprs + bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD - bl .altivec_unavailable_exception - b .ret_from_except + bl altivec_unavailable_exception + b ret_from_except /* AltiVec Assist */ START_EXCEPTION(altivec_assist); @@ -662,39 +662,39 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) PROLOG_ADDITION_NONE) EXCEPTION_COMMON(0x220) INTS_DISABLE - bl .save_nvgprs + bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION - bl .altivec_assist_exception + bl altivec_assist_exception END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #else - bl .unknown_exception + bl unknown_exception #endif - b .ret_from_except + b ret_from_except /* Decrementer Interrupt */ MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER, - decrementer, .timer_interrupt, ACK_DEC) + decrementer, timer_interrupt, ACK_DEC) /* Fixed Interval Timer Interrupt */ MASKABLE_EXCEPTION(0x980, BOOKE_INTERRUPT_FIT, - fixed_interval, .unknown_exception, ACK_FIT) + fixed_interval, unknown_exception, ACK_FIT) /* Watchdog Timer Interrupt */ START_EXCEPTION(watchdog); CRIT_EXCEPTION_PROLOG(0x9f0, BOOKE_INTERRUPT_WATCHDOG, PROLOG_ADDITION_NONE) EXCEPTION_COMMON_CRIT(0x9f0) - bl .save_nvgprs + bl save_nvgprs bl special_reg_save CHECK_NAPPING(); addi r3,r1,STACK_FRAME_OVERHEAD #ifdef CONFIG_BOOKE_WDT - bl .WatchdogException + bl WatchdogException #else - bl .unknown_exception + bl unknown_exception #endif b ret_from_crit_except @@ -712,10 +712,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) PROLOG_ADDITION_NONE) EXCEPTION_COMMON(0xf20) INTS_DISABLE - bl .save_nvgprs + bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD - bl .unknown_exception - b .ret_from_except + bl unknown_exception + b ret_from_except /* Debug exception as a critical interrupt*/ START_EXCEPTION(debug_crit); @@ -774,9 +774,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) mr r4,r14 ld r14,PACA_EXCRIT+EX_R14(r13) ld r15,PACA_EXCRIT+EX_R15(r13) - bl .save_nvgprs - bl .DebugException - b .ret_from_except + bl save_nvgprs + bl DebugException + b ret_from_except kernel_dbg_exc: b . /* NYI */ @@ -839,9 +839,9 @@ kernel_dbg_exc: mr r4,r14 ld r14,PACA_EXDBG+EX_R14(r13) ld r15,PACA_EXDBG+EX_R15(r13) - bl .save_nvgprs - bl .DebugException - b .ret_from_except + bl save_nvgprs + bl DebugException + b ret_from_except START_EXCEPTION(perfmon); NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR, @@ -850,23 +850,23 @@ kernel_dbg_exc: INTS_DISABLE CHECK_NAPPING() addi r3,r1,STACK_FRAME_OVERHEAD - bl .performance_monitor_exception - b .ret_from_except_lite + bl performance_monitor_exception + b ret_from_except_lite /* Doorbell interrupt */ MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL, - doorbell, .doorbell_exception, ACK_NONE) + doorbell, doorbell_exception, ACK_NONE) /* Doorbell critical Interrupt */ START_EXCEPTION(doorbell_crit); CRIT_EXCEPTION_PROLOG(0x2a0, BOOKE_INTERRUPT_DOORBELL_CRITICAL, PROLOG_ADDITION_NONE) EXCEPTION_COMMON_CRIT(0x2a0) - bl .save_nvgprs + bl save_nvgprs bl special_reg_save CHECK_NAPPING(); addi r3,r1,STACK_FRAME_OVERHEAD - bl .unknown_exception + bl unknown_exception b ret_from_crit_except /* @@ -878,21 +878,21 @@ kernel_dbg_exc: PROLOG_ADDITION_NONE) EXCEPTION_COMMON(0x2c0) addi r3,r1,STACK_FRAME_OVERHEAD - bl .save_nvgprs + bl save_nvgprs INTS_RESTORE_HARD - bl .unknown_exception - b .ret_from_except + bl unknown_exception + b ret_from_except /* Guest Doorbell critical Interrupt */ START_EXCEPTION(guest_doorbell_crit); CRIT_EXCEPTION_PROLOG(0x2e0, BOOKE_INTERRUPT_GUEST_DBELL_CRIT, PROLOG_ADDITION_NONE) EXCEPTION_COMMON_CRIT(0x2e0) - bl .save_nvgprs + bl save_nvgprs bl special_reg_save CHECK_NAPPING(); addi r3,r1,STACK_FRAME_OVERHEAD - bl .unknown_exception + bl unknown_exception b ret_from_crit_except /* Hypervisor call */ @@ -901,10 +901,10 @@ kernel_dbg_exc: PROLOG_ADDITION_NONE) EXCEPTION_COMMON(0x310) addi r3,r1,STACK_FRAME_OVERHEAD - bl .save_nvgprs + bl save_nvgprs INTS_RESTORE_HARD - bl .unknown_exception - b .ret_from_except + bl unknown_exception + b ret_from_except /* Embedded Hypervisor priviledged */ START_EXCEPTION(ehpriv); @@ -912,10 +912,10 @@ kernel_dbg_exc: PROLOG_ADDITION_NONE) EXCEPTION_COMMON(0x320) addi r3,r1,STACK_FRAME_OVERHEAD - bl .save_nvgprs + bl save_nvgprs INTS_RESTORE_HARD - bl .unknown_exception - b .ret_from_except + bl unknown_exception + b ret_from_except /* LRAT Error interrupt */ START_EXCEPTION(lrat_error); @@ -1014,16 +1014,16 @@ storage_fault_common: mr r5,r15 ld r14,PACA_EXGEN+EX_R14(r13) ld r15,PACA_EXGEN+EX_R15(r13) - bl .do_page_fault + bl do_page_fault cmpdi r3,0 bne- 1f - b .ret_from_except_lite -1: bl .save_nvgprs + b ret_from_except_lite +1: bl save_nvgprs mr r5,r3 addi r3,r1,STACK_FRAME_OVERHEAD ld r4,_DAR(r1) - bl .bad_page_fault - b .ret_from_except + bl bad_page_fault + b ret_from_except /* * Alignment exception doesn't fit entirely in the 0x100 bytes so it @@ -1035,10 +1035,10 @@ alignment_more: addi r3,r1,STACK_FRAME_OVERHEAD ld r14,PACA_EXGEN+EX_R14(r13) ld r15,PACA_EXGEN+EX_R15(r13) - bl .save_nvgprs + bl save_nvgprs INTS_RESTORE_HARD - bl .alignment_exception - b .ret_from_except + bl alignment_exception + b ret_from_except /* * We branch here from entry_64.S for the last stage of the exception @@ -1172,7 +1172,7 @@ bad_stack_book3e: std r12,0(r11) ld r2,PACATOC(r13) 1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .kernel_bad_stack + bl kernel_bad_stack b 1b /* @@ -1521,13 +1521,13 @@ _GLOBAL(start_initialization_book3e) * and always use AS 0, so we just set it up to match our link * address and never use 0 based addresses. */ - bl .initial_tlb_book3e + bl initial_tlb_book3e /* Init global core bits */ - bl .init_core_book3e + bl init_core_book3e /* Init per-thread bits */ - bl .init_thread_book3e + bl init_thread_book3e /* Return to common init code */ tovirt(r28,r28) @@ -1548,7 +1548,7 @@ _GLOBAL(start_initialization_book3e) */ _GLOBAL(book3e_secondary_core_init_tlb_set) li r4,1 - b .generic_secondary_smp_init + b generic_secondary_smp_init _GLOBAL(book3e_secondary_core_init) mflr r28 @@ -1558,18 +1558,18 @@ _GLOBAL(book3e_secondary_core_init) bne 2f /* Setup TLB for this core */ - bl .initial_tlb_book3e + bl initial_tlb_book3e /* We can return from the above running at a different * address, so recalculate r2 (TOC) */ - bl .relative_toc + bl relative_toc /* Init global core bits */ -2: bl .init_core_book3e +2: bl init_core_book3e /* Init per-thread bits */ -3: bl .init_thread_book3e +3: bl init_thread_book3e /* Return to common init code at proper virtual address. * @@ -1596,14 +1596,14 @@ _GLOBAL(book3e_secondary_thread_init) mflr r28 b 3b -_STATIC(init_core_book3e) +init_core_book3e: /* Establish the interrupt vector base */ LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e) mtspr SPRN_IVPR,r3 sync blr -_STATIC(init_thread_book3e) +init_thread_book3e: lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h mtspr SPRN_EPCR,r3 diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 3afd3915921a..20f11eb4dff7 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -132,12 +132,12 @@ BEGIN_FTR_SECTION #endif beq cr1,2f - b .power7_wakeup_noloss -2: b .power7_wakeup_loss + b power7_wakeup_noloss +2: b power7_wakeup_loss /* Fast Sleep wakeup on PowerNV */ 8: GET_PACA(r13) - b .power7_wakeup_tb_loss + b power7_wakeup_tb_loss 9: END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) @@ -211,16 +211,16 @@ data_access_slb_pSeries: #endif /* __DISABLED__ */ mfspr r12,SPRN_SRR1 #ifndef CONFIG_RELOCATABLE - b .slb_miss_realmode + b slb_miss_realmode #else /* - * We can't just use a direct branch to .slb_miss_realmode + * We can't just use a direct branch to slb_miss_realmode * because the distance from here to there depends on where * the kernel ends up being put. */ mfctr r11 ld r10,PACAKBASE(r13) - LOAD_HANDLER(r10, .slb_miss_realmode) + LOAD_HANDLER(r10, slb_miss_realmode) mtctr r10 bctr #endif @@ -243,11 +243,11 @@ instruction_access_slb_pSeries: #endif /* __DISABLED__ */ mfspr r12,SPRN_SRR1 #ifndef CONFIG_RELOCATABLE - b .slb_miss_realmode + b slb_miss_realmode #else mfctr r11 ld r10,PACAKBASE(r13) - LOAD_HANDLER(r10, .slb_miss_realmode) + LOAD_HANDLER(r10, slb_miss_realmode) mtctr r10 bctr #endif @@ -524,7 +524,7 @@ do_stab_bolted_pSeries: std r12,PACA_EXSLB+EX_R12(r13) GET_SCRATCH0(r10) std r10,PACA_EXSLB+EX_R13(r13) - EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted, EXC_STD) + EXCEPTION_PROLOG_PSERIES_1(do_stab_bolted, EXC_STD) KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300) KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380) @@ -769,38 +769,38 @@ kvmppc_skip_Hinterrupt: /*** Common interrupt handlers ***/ - STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) + STD_EXCEPTION_COMMON(0x100, system_reset, system_reset_exception) STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) - STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt) - STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt) + STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, timer_interrupt) + STD_EXCEPTION_COMMON(0x980, hdecrementer, hdec_interrupt) #ifdef CONFIG_PPC_DOORBELL - STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .doorbell_exception) + STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, doorbell_exception) #else - STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .unknown_exception) + STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, unknown_exception) #endif - STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) - STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) - STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) - STD_EXCEPTION_COMMON(0xe40, emulation_assist, .emulation_assist_interrupt) - STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception) + STD_EXCEPTION_COMMON(0xb00, trap_0b, unknown_exception) + STD_EXCEPTION_COMMON(0xd00, single_step, single_step_exception) + STD_EXCEPTION_COMMON(0xe00, trap_0e, unknown_exception) + STD_EXCEPTION_COMMON(0xe40, emulation_assist, emulation_assist_interrupt) + STD_EXCEPTION_COMMON(0xe60, hmi_exception, unknown_exception) #ifdef CONFIG_PPC_DOORBELL - STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .doorbell_exception) + STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, doorbell_exception) #else - STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .unknown_exception) + STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, unknown_exception) #endif - STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception) - STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) - STD_EXCEPTION_COMMON(0x1502, denorm, .unknown_exception) + STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, performance_monitor_exception) + STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, instruction_breakpoint_exception) + STD_EXCEPTION_COMMON(0x1502, denorm, unknown_exception) #ifdef CONFIG_ALTIVEC - STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception) + STD_EXCEPTION_COMMON(0x1700, altivec_assist, altivec_assist_exception) #else - STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception) + STD_EXCEPTION_COMMON(0x1700, altivec_assist, unknown_exception) #endif #ifdef CONFIG_CBE_RAS - STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception) - STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception) - STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception) + STD_EXCEPTION_COMMON(0x1200, cbe_system_error, cbe_system_error_exception) + STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, cbe_maintenance_exception) + STD_EXCEPTION_COMMON(0x1800, cbe_thermal, cbe_thermal_exception) #endif /* CONFIG_CBE_RAS */ /* @@ -829,16 +829,16 @@ data_access_slb_relon_pSeries: mfspr r3,SPRN_DAR mfspr r12,SPRN_SRR1 #ifndef CONFIG_RELOCATABLE - b .slb_miss_realmode + b slb_miss_realmode #else /* - * We can't just use a direct branch to .slb_miss_realmode + * We can't just use a direct branch to slb_miss_realmode * because the distance from here to there depends on where * the kernel ends up being put. */ mfctr r11 ld r10,PACAKBASE(r13) - LOAD_HANDLER(r10, .slb_miss_realmode) + LOAD_HANDLER(r10, slb_miss_realmode) mtctr r10 bctr #endif @@ -854,11 +854,11 @@ instruction_access_slb_relon_pSeries: mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ mfspr r12,SPRN_SRR1 #ifndef CONFIG_RELOCATABLE - b .slb_miss_realmode + b slb_miss_realmode #else mfctr r11 ld r10,PACAKBASE(r13) - LOAD_HANDLER(r10, .slb_miss_realmode) + LOAD_HANDLER(r10, slb_miss_realmode) mtctr r10 bctr #endif @@ -966,7 +966,7 @@ system_call_entry: b system_call_common ppc64_runlatch_on_trampoline: - b .__ppc64_runlatch_on + b __ppc64_runlatch_on /* * Here we have detected that the kernel stack pointer is bad. @@ -1025,7 +1025,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) std r12,RESULT(r1) std r11,STACK_FRAME_OVERHEAD-16(r1) 1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .kernel_bad_stack + bl kernel_bad_stack b 1b /* @@ -1046,7 +1046,7 @@ data_access_common: ld r3,PACA_EXGEN+EX_DAR(r13) lwz r4,PACA_EXGEN+EX_DSISR(r13) li r5,0x300 - b .do_hash_page /* Try to handle as hpte fault */ + b do_hash_page /* Try to handle as hpte fault */ .align 7 .globl h_data_storage_common @@ -1056,11 +1056,11 @@ h_data_storage_common: mfspr r10,SPRN_HDSISR stw r10,PACA_EXGEN+EX_DSISR(r13) EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN) - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .unknown_exception - b .ret_from_except + bl unknown_exception + b ret_from_except .align 7 .globl instruction_access_common @@ -1071,9 +1071,9 @@ instruction_access_common: ld r3,_NIP(r1) andis. r4,r12,0x5820 li r5,0x400 - b .do_hash_page /* Try to handle as hpte fault */ + b do_hash_page /* Try to handle as hpte fault */ - STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception) + STD_EXCEPTION_COMMON(0xe20, h_instr_storage, unknown_exception) /* * Here is the common SLB miss user that is used when going to virtual @@ -1088,7 +1088,7 @@ slb_miss_user_common: stw r9,PACA_EXGEN+EX_CCR(r13) std r10,PACA_EXGEN+EX_LR(r13) std r11,PACA_EXGEN+EX_SRR0(r13) - bl .slb_allocate_user + bl slb_allocate_user ld r10,PACA_EXGEN+EX_LR(r13) ld r3,PACA_EXGEN+EX_R3(r13) @@ -1131,9 +1131,9 @@ slb_miss_fault: unrecov_user_slb: EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN) DISABLE_INTS - bl .save_nvgprs + bl save_nvgprs 1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception + bl unrecoverable_exception b 1b #endif /* __DISABLED__ */ @@ -1158,10 +1158,10 @@ machine_check_common: lwz r4,PACA_EXGEN+EX_DSISR(r13) std r3,_DAR(r1) std r4,_DSISR(r1) - bl .save_nvgprs + bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD - bl .machine_check_exception - b .ret_from_except + bl machine_check_exception + b ret_from_except .align 7 .globl alignment_common @@ -1175,31 +1175,31 @@ alignment_common: lwz r4,PACA_EXGEN+EX_DSISR(r13) std r3,_DAR(r1) std r4,_DSISR(r1) - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .alignment_exception - b .ret_from_except + bl alignment_exception + b ret_from_except .align 7 .globl program_check_common program_check_common: EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .program_check_exception - b .ret_from_except + bl program_check_exception + b ret_from_except .align 7 .globl fp_unavailable_common fp_unavailable_common: EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) bne 1f /* if from user, just load it up */ - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .kernel_fp_unavailable_exception + bl kernel_fp_unavailable_exception BUG_OPCODE 1: #ifdef CONFIG_PPC_TRANSACTIONAL_MEM @@ -1211,15 +1211,15 @@ BEGIN_FTR_SECTION bne- 2f END_FTR_SECTION_IFSET(CPU_FTR_TM) #endif - bl .load_up_fpu + bl load_up_fpu b fast_exception_return #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 2: /* User process was in a transaction */ - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .fp_unavailable_tm - b .ret_from_except + bl fp_unavailable_tm + b ret_from_except #endif .align 7 .globl altivec_unavailable_common @@ -1237,24 +1237,24 @@ BEGIN_FTR_SECTION bne- 2f END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69) #endif - bl .load_up_altivec + bl load_up_altivec b fast_exception_return #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 2: /* User process was in a transaction */ - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .altivec_unavailable_tm - b .ret_from_except + bl altivec_unavailable_tm + b ret_from_except #endif 1: END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .altivec_unavailable_exception - b .ret_from_except + bl altivec_unavailable_exception + b ret_from_except .align 7 .globl vsx_unavailable_common @@ -1272,26 +1272,26 @@ BEGIN_FTR_SECTION bne- 2f END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69) #endif - b .load_up_vsx + b load_up_vsx #ifdef CONFIG_PPC_TRANSACTIONAL_MEM 2: /* User process was in a transaction */ - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .vsx_unavailable_tm - b .ret_from_except + bl vsx_unavailable_tm + b ret_from_except #endif 1: END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif - bl .save_nvgprs + bl save_nvgprs DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - bl .vsx_unavailable_exception - b .ret_from_except + bl vsx_unavailable_exception + b ret_from_except - STD_EXCEPTION_COMMON(0xf60, facility_unavailable, .facility_unavailable_exception) - STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, .facility_unavailable_exception) + STD_EXCEPTION_COMMON(0xf60, facility_unavailable, facility_unavailable_exception) + STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, facility_unavailable_exception) .align 7 .globl __end_handlers @@ -1386,9 +1386,9 @@ _GLOBAL(opal_mc_secondary_handler) machine_check_handle_early: std r0,GPR0(r1) /* Save r0 */ EXCEPTION_PROLOG_COMMON_3(0x200) - bl .save_nvgprs + bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD - bl .machine_check_early + bl machine_check_early ld r12,_MSR(r1) #ifdef CONFIG_PPC_P7_NAP /* @@ -1408,11 +1408,11 @@ machine_check_handle_early: /* Supervisor state loss */ li r0,1 stb r0,PACA_NAPSTATELOST(r13) -3: bl .machine_check_queue_event +3: bl machine_check_queue_event MACHINE_CHECK_HANDLER_WINDUP GET_PACA(r13) ld r1,PACAR1(r13) - b .power7_enter_nap_mode + b power7_enter_nap_mode 4: #endif /* @@ -1444,7 +1444,7 @@ machine_check_handle_early: andi. r11,r12,MSR_RI bne 2f 1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception + bl unrecoverable_exception b 1b 2: /* @@ -1452,7 +1452,7 @@ machine_check_handle_early: * Queue up the MCE event so that we can log it later, while * returning from kernel or opal call. */ - bl .machine_check_queue_event + bl machine_check_queue_event MACHINE_CHECK_HANDLER_WINDUP rfid 9: @@ -1468,7 +1468,7 @@ machine_check_handle_early: * r3 is saved in paca->slb_r3 * We assume we aren't going to take any exceptions during this procedure. */ -_GLOBAL(slb_miss_realmode) +slb_miss_realmode: mflr r10 #ifdef CONFIG_RELOCATABLE mtctr r11 @@ -1477,7 +1477,7 @@ _GLOBAL(slb_miss_realmode) stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ - bl .slb_allocate_realmode + bl slb_allocate_realmode /* All done -- return from exception. */ @@ -1517,9 +1517,9 @@ _GLOBAL(slb_miss_realmode) unrecov_slb: EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) DISABLE_INTS - bl .save_nvgprs + bl save_nvgprs 1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception + bl unrecoverable_exception b 1b @@ -1536,7 +1536,7 @@ power4_fixup_nap: * Hash table stuff */ .align 7 -_STATIC(do_hash_page) +do_hash_page: std r3,_DAR(r1) std r4,_DSISR(r1) @@ -1573,7 +1573,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB) * * at return r3 = 0 for success, 1 for page fault, negative for error */ - bl .hash_page /* build HPTE if possible */ + bl hash_page /* build HPTE if possible */ cmpdi r3,0 /* see if hash_page succeeded */ /* Success */ @@ -1587,35 +1587,35 @@ handle_page_fault: 11: ld r4,_DAR(r1) ld r5,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_page_fault + bl do_page_fault cmpdi r3,0 beq+ 12f - bl .save_nvgprs + bl save_nvgprs mr r5,r3 addi r3,r1,STACK_FRAME_OVERHEAD lwz r4,_DAR(r1) - bl .bad_page_fault - b .ret_from_except + bl bad_page_fault + b ret_from_except /* We have a data breakpoint exception - handle it */ handle_dabr_fault: - bl .save_nvgprs + bl save_nvgprs ld r4,_DAR(r1) ld r5,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_break -12: b .ret_from_except_lite + bl do_break +12: b ret_from_except_lite /* We have a page fault that hash_page could handle but HV refused * the PTE insertion */ -13: bl .save_nvgprs +13: bl save_nvgprs mr r5,r3 addi r3,r1,STACK_FRAME_OVERHEAD ld r4,_DAR(r1) - bl .low_hash_fault - b .ret_from_except + bl low_hash_fault + b ret_from_except /* * We come here as a result of a DSI at a point where we don't want @@ -1624,16 +1624,16 @@ handle_dabr_fault: * were soft-disabled. We want to invoke the exception handler for * the access, or panic if there isn't a handler. */ -77: bl .save_nvgprs +77: bl save_nvgprs mr r4,r3 addi r3,r1,STACK_FRAME_OVERHEAD li r5,SIGSEGV - bl .bad_page_fault - b .ret_from_except + bl bad_page_fault + b ret_from_except /* here we have a segment miss */ do_ste_alloc: - bl .ste_allocate /* try to insert stab entry */ + bl ste_allocate /* try to insert stab entry */ cmpdi r3,0 bne- handle_page_fault b fast_exception_return @@ -1646,7 +1646,7 @@ do_ste_alloc: * We assume (DAR >> 60) == 0xc. */ .align 7 -_GLOBAL(do_stab_bolted) +do_stab_bolted: stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */ mfspr r11,SPRN_DAR /* ea */ diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c index 7213d930918d..742694c1d852 100644 --- a/arch/powerpc/kernel/fadump.c +++ b/arch/powerpc/kernel/fadump.c @@ -69,7 +69,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node, */ token = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL); if (!token) - return 0; + return 1; fw_dump.fadump_supported = 1; fw_dump.ibm_configure_kernel_dump = *token; @@ -92,7 +92,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node, &size); if (!sections) - return 0; + return 1; num_sections = size / (3 * sizeof(u32)); @@ -110,6 +110,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node, break; } } + return 1; } @@ -645,7 +646,7 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm) } /* Lower 4 bytes of reg_value contains logical cpu id */ cpu = reg_entry->reg_value & FADUMP_CPU_ID_MASK; - if (!cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) { + if (fdh && !cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) { SKIP_TO_NEXT_CPU(reg_entry); continue; } @@ -662,9 +663,11 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm) } fadump_final_note(note_buf); - pr_debug("Updating elfcore header (%llx) with cpu notes\n", + if (fdh) { + pr_debug("Updating elfcore header (%llx) with cpu notes\n", fdh->elfcorehdr_addr); - fadump_update_elfcore_header((char *)__va(fdh->elfcorehdr_addr)); + fadump_update_elfcore_header((char *)__va(fdh->elfcorehdr_addr)); + } return 0; error_out: diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 6a014c763cc7..f202d0731b06 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -105,11 +105,9 @@ __ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr) { unsigned int op; - unsigned int jmp[5]; unsigned long ptr; unsigned long ip = rec->ip; - unsigned long tramp; - int offset; + void *tramp; /* read where this goes */ if (probe_kernel_read(&op, (void *)ip, sizeof(int))) @@ -122,96 +120,41 @@ __ftrace_make_nop(struct module *mod, } /* lets find where the pointer goes */ - tramp = find_bl_target(ip, op); - - /* - * On PPC64 the trampoline looks like: - * 0x3d, 0x82, 0x00, 0x00, addis r12,r2, <high> - * 0x39, 0x8c, 0x00, 0x00, addi r12,r12, <low> - * Where the bytes 2,3,6 and 7 make up the 32bit offset - * to the TOC that holds the pointer. - * to jump to. - * 0xf8, 0x41, 0x00, 0x28, std r2,40(r1) - * 0xe9, 0x6c, 0x00, 0x20, ld r11,32(r12) - * The actually address is 32 bytes from the offset - * into the TOC. - * 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12) - */ - - pr_devel("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc); - - /* Find where the trampoline jumps to */ - if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) { - printk(KERN_ERR "Failed to read %lx\n", tramp); - return -EFAULT; - } + tramp = (void *)find_bl_target(ip, op); - pr_devel(" %08x %08x", jmp[0], jmp[1]); + pr_devel("ip:%lx jumps to %p", ip, tramp); - /* verify that this is what we expect it to be */ - if (((jmp[0] & 0xffff0000) != 0x3d820000) || - ((jmp[1] & 0xffff0000) != 0x398c0000) || - (jmp[2] != 0xf8410028) || - (jmp[3] != 0xe96c0020) || - (jmp[4] != 0xe84c0028)) { + if (!is_module_trampoline(tramp)) { printk(KERN_ERR "Not a trampoline\n"); return -EINVAL; } - /* The bottom half is signed extended */ - offset = ((unsigned)((unsigned short)jmp[0]) << 16) + - (int)((short)jmp[1]); - - pr_devel(" %x ", offset); - - /* get the address this jumps too */ - tramp = mod->arch.toc + offset + 32; - pr_devel("toc: %lx", tramp); - - if (probe_kernel_read(jmp, (void *)tramp, 8)) { - printk(KERN_ERR "Failed to read %lx\n", tramp); + if (module_trampoline_target(mod, tramp, &ptr)) { + printk(KERN_ERR "Failed to get trampoline target\n"); return -EFAULT; } - pr_devel(" %08x %08x\n", jmp[0], jmp[1]); - -#ifdef __LITTLE_ENDIAN__ - ptr = ((unsigned long)jmp[1] << 32) + jmp[0]; -#else - ptr = ((unsigned long)jmp[0] << 32) + jmp[1]; -#endif + pr_devel("trampoline target %lx", ptr); /* This should match what was called */ if (ptr != ppc_function_entry((void *)addr)) { - printk(KERN_ERR "addr does not match %lx\n", ptr); + printk(KERN_ERR "addr %lx does not match expected %lx\n", + ptr, ppc_function_entry((void *)addr)); return -EINVAL; } /* - * We want to nop the line, but the next line is - * 0xe8, 0x41, 0x00, 0x28 ld r2,40(r1) - * This needs to be turned to a nop too. - */ - if (probe_kernel_read(&op, (void *)(ip+4), MCOUNT_INSN_SIZE)) - return -EFAULT; - - if (op != 0xe8410028) { - printk(KERN_ERR "Next line is not ld! (%08x)\n", op); - return -EINVAL; - } - - /* - * Milton Miller pointed out that we can not blindly do nops. - * If a task was preempted when calling a trace function, - * the nops will remove the way to restore the TOC in r2 - * and the r2 TOC will get corrupted. - */ - - /* - * Replace: - * bl <tramp> <==== will be replaced with "b 1f" - * ld r2,40(r1) - * 1: + * Our original call site looks like: + * + * bl <tramp> + * ld r2,XX(r1) + * + * Milton Miller pointed out that we can not simply nop the branch. + * If a task was preempted when calling a trace function, the nops + * will remove the way to restore the TOC in r2 and the r2 TOC will + * get corrupted. + * + * Use a b +8 to jump over the load. */ op = 0x48000008; /* b +8 */ @@ -349,19 +292,24 @@ static int __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) { unsigned int op[2]; - unsigned long ip = rec->ip; + void *ip = (void *)rec->ip; /* read where this goes */ - if (probe_kernel_read(op, (void *)ip, MCOUNT_INSN_SIZE * 2)) + if (probe_kernel_read(op, ip, sizeof(op))) return -EFAULT; /* - * It should be pointing to two nops or - * b +8; ld r2,40(r1) + * We expect to see: + * + * b +8 + * ld r2,XX(r1) + * + * The load offset is different depending on the ABI. For simplicity + * just mask it out when doing the compare. */ - if (((op[0] != 0x48000008) || (op[1] != 0xe8410028)) && - ((op[0] != PPC_INST_NOP) || (op[1] != PPC_INST_NOP))) { - printk(KERN_ERR "Expected NOPs but have %x %x\n", op[0], op[1]); + if ((op[0] != 0x48000008) || ((op[1] & 0xffff00000) != 0xe8410000)) { + printk(KERN_ERR "Unexpected call sequence: %x %x\n", + op[0], op[1]); return -EINVAL; } @@ -371,23 +319,16 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return -EINVAL; } - /* create the branch to the trampoline */ - op[0] = create_branch((unsigned int *)ip, - rec->arch.mod->arch.tramp, BRANCH_SET_LINK); - if (!op[0]) { - printk(KERN_ERR "REL24 out of range!\n"); + /* Ensure branch is within 24 bits */ + if (create_branch(ip, rec->arch.mod->arch.tramp, BRANCH_SET_LINK)) { + printk(KERN_ERR "Branch out of range"); return -EINVAL; } - /* ld r2,40(r1) */ - op[1] = 0xe8410028; - - pr_devel("write to %lx\n", rec->ip); - - if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2)) - return -EPERM; - - flush_icache_range(ip, ip + 8); + if (patch_branch(ip, rec->arch.mod->arch.tramp, BRANCH_SET_LINK)) { + printk(KERN_ERR "REL24 out of range!\n"); + return -EINVAL; + } return 0; } diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index b7363bd42452..a95145d7f61b 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -70,16 +70,15 @@ _GLOBAL(__start) /* NOP this out unconditionally */ BEGIN_FTR_SECTION FIXUP_ENDIAN - b .__start_initialization_multiplatform + b __start_initialization_multiplatform END_FTR_SECTION(0, 1) /* Catch branch to 0 in real mode */ trap - /* Secondary processors spin on this value until it becomes nonzero. - * When it does it contains the real address of the descriptor - * of the function that the cpu should jump to to continue - * initialization. + /* Secondary processors spin on this value until it becomes non-zero. + * When non-zero, it contains the real address of the function the cpu + * should jump to. */ .balign 8 .globl __secondary_hold_spinloop @@ -140,16 +139,15 @@ __secondary_hold: tovirt(r26,r26) #endif /* All secondary cpus wait here until told to start. */ -100: ld r4,__secondary_hold_spinloop-_stext(r26) - cmpdi 0,r4,0 +100: ld r12,__secondary_hold_spinloop-_stext(r26) + cmpdi 0,r12,0 beq 100b #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) #ifdef CONFIG_PPC_BOOK3E - tovirt(r4,r4) + tovirt(r12,r12) #endif - ld r4,0(r4) /* deref function descriptor */ - mtctr r4 + mtctr r12 mr r3,r24 /* * it may be the case that other platforms have r4 right to @@ -186,16 +184,16 @@ _GLOBAL(generic_secondary_thread_init) mr r24,r3 /* turn on 64-bit mode */ - bl .enable_64b_mode + bl enable_64b_mode /* get a valid TOC pointer, wherever we're mapped at */ - bl .relative_toc + bl relative_toc tovirt(r2,r2) #ifdef CONFIG_PPC_BOOK3E /* Book3E initialization */ mr r3,r24 - bl .book3e_secondary_thread_init + bl book3e_secondary_thread_init #endif b generic_secondary_common_init @@ -214,17 +212,17 @@ _GLOBAL(generic_secondary_smp_init) mr r25,r4 /* turn on 64-bit mode */ - bl .enable_64b_mode + bl enable_64b_mode /* get a valid TOC pointer, wherever we're mapped at */ - bl .relative_toc + bl relative_toc tovirt(r2,r2) #ifdef CONFIG_PPC_BOOK3E /* Book3E initialization */ mr r3,r24 mr r4,r25 - bl .book3e_secondary_core_init + bl book3e_secondary_core_init #endif generic_secondary_common_init: @@ -236,7 +234,7 @@ generic_secondary_common_init: ld r13,0(r13) /* Get base vaddr of paca array */ #ifndef CONFIG_SMP addi r13,r13,PACA_SIZE /* know r13 if used accidentally */ - b .kexec_wait /* wait for next kernel if !SMP */ + b kexec_wait /* wait for next kernel if !SMP */ #else LOAD_REG_ADDR(r7, nr_cpu_ids) /* Load nr_cpu_ids address */ lwz r7,0(r7) /* also the max paca allocated */ @@ -250,7 +248,7 @@ generic_secondary_common_init: blt 1b mr r3,r24 /* not found, copy phys to r3 */ - b .kexec_wait /* next kernel might do better */ + b kexec_wait /* next kernel might do better */ 2: SET_PACA(r13) #ifdef CONFIG_PPC_BOOK3E @@ -264,11 +262,13 @@ generic_secondary_common_init: /* See if we need to call a cpu state restore handler */ LOAD_REG_ADDR(r23, cur_cpu_spec) ld r23,0(r23) - ld r23,CPU_SPEC_RESTORE(r23) - cmpdi 0,r23,0 + ld r12,CPU_SPEC_RESTORE(r23) + cmpdi 0,r12,0 beq 3f - ld r23,0(r23) - mtctr r23 +#if !defined(_CALL_ELF) || _CALL_ELF != 2 + ld r12,0(r12) +#endif + mtctr r12 bctrl 3: LOAD_REG_ADDR(r3, spinning_secondaries) /* Decrement spinning_secondaries */ @@ -299,7 +299,7 @@ generic_secondary_common_init: * Assumes we're mapped EA == RA if the MMU is on. */ #ifdef CONFIG_PPC_BOOK3S -_STATIC(__mmu_off) +__mmu_off: mfmsr r3 andi. r0,r3,MSR_IR|MSR_DR beqlr @@ -324,12 +324,12 @@ _STATIC(__mmu_off) * DT block, r4 is a physical pointer to the kernel itself * */ -_GLOBAL(__start_initialization_multiplatform) +__start_initialization_multiplatform: /* Make sure we are running in 64 bits mode */ - bl .enable_64b_mode + bl enable_64b_mode /* Get TOC pointer (current runtime address) */ - bl .relative_toc + bl relative_toc /* find out where we are now */ bcl 20,31,$+4 @@ -342,7 +342,7 @@ _GLOBAL(__start_initialization_multiplatform) */ cmpldi cr0,r5,0 beq 1f - b .__boot_from_prom /* yes -> prom */ + b __boot_from_prom /* yes -> prom */ 1: /* Save parameters */ mr r31,r3 @@ -354,8 +354,8 @@ _GLOBAL(__start_initialization_multiplatform) #endif #ifdef CONFIG_PPC_BOOK3E - bl .start_initialization_book3e - b .__after_prom_start + bl start_initialization_book3e + b __after_prom_start #else /* Setup some critical 970 SPRs before switching MMU off */ mfspr r0,SPRN_PVR @@ -368,15 +368,15 @@ _GLOBAL(__start_initialization_multiplatform) beq 1f cmpwi r0,0x45 /* 970GX */ bne 2f -1: bl .__cpu_preinit_ppc970 +1: bl __cpu_preinit_ppc970 2: /* Switch off MMU if not already off */ - bl .__mmu_off - b .__after_prom_start + bl __mmu_off + b __after_prom_start #endif /* CONFIG_PPC_BOOK3E */ -_INIT_STATIC(__boot_from_prom) +__boot_from_prom: #ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE /* Save parameters */ mr r31,r3 @@ -395,7 +395,7 @@ _INIT_STATIC(__boot_from_prom) #ifdef CONFIG_RELOCATABLE /* Relocate code for where we are now */ mr r3,r26 - bl .relocate + bl relocate #endif /* Restore parameters */ @@ -407,14 +407,14 @@ _INIT_STATIC(__boot_from_prom) /* Do all of the interaction with OF client interface */ mr r8,r26 - bl .prom_init + bl prom_init #endif /* #CONFIG_PPC_OF_BOOT_TRAMPOLINE */ /* We never return. We also hit that trap if trying to boot * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */ trap -_STATIC(__after_prom_start) +__after_prom_start: #ifdef CONFIG_RELOCATABLE /* process relocations for the final address of the kernel */ lis r25,PAGE_OFFSET@highest /* compute virtual base of kernel */ @@ -424,7 +424,7 @@ _STATIC(__after_prom_start) bne 1f add r25,r25,r26 1: mr r3,r25 - bl .relocate + bl relocate #endif /* @@ -464,12 +464,12 @@ _STATIC(__after_prom_start) lis r5,(copy_to_here - _stext)@ha addi r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */ - bl .copy_and_flush /* copy the first n bytes */ + bl copy_and_flush /* copy the first n bytes */ /* this includes the code being */ /* executed here. */ addis r8,r3,(4f - _stext)@ha /* Jump to the copy of this code */ - addi r8,r8,(4f - _stext)@l /* that we just made */ - mtctr r8 + addi r12,r8,(4f - _stext)@l /* that we just made */ + mtctr r12 bctr .balign 8 @@ -478,9 +478,9 @@ p_end: .llong _end - _stext 4: /* Now copy the rest of the kernel up to _end */ addis r5,r26,(p_end - _stext)@ha ld r5,(p_end - _stext)@l(r5) /* get _end */ -5: bl .copy_and_flush /* copy the rest */ +5: bl copy_and_flush /* copy the rest */ -9: b .start_here_multiplatform +9: b start_here_multiplatform /* * Copy routine used to copy the kernel to start at physical address 0 @@ -544,7 +544,7 @@ __secondary_start_pmac_0: _GLOBAL(pmac_secondary_start) /* turn on 64-bit mode */ - bl .enable_64b_mode + bl enable_64b_mode li r0,0 mfspr r3,SPRN_HID4 @@ -556,11 +556,11 @@ _GLOBAL(pmac_secondary_start) slbia /* get TOC pointer (real address) */ - bl .relative_toc + bl relative_toc tovirt(r2,r2) /* Copy some CPU settings from CPU 0 */ - bl .__restore_cpu_ppc970 + bl __restore_cpu_ppc970 /* pSeries do that early though I don't think we really need it */ mfmsr r3 @@ -619,7 +619,7 @@ __secondary_start: std r14,PACAKSAVE(r13) /* Do early setup for that CPU (stab, slb, hash table pointer) */ - bl .early_setup_secondary + bl early_setup_secondary /* * setup the new stack pointer, but *don't* use this until @@ -639,7 +639,7 @@ __secondary_start: stb r0,PACAIRQHAPPENED(r13) /* enable MMU and jump to start_secondary */ - LOAD_REG_ADDR(r3, .start_secondary_prolog) + LOAD_REG_ADDR(r3, start_secondary_prolog) LOAD_REG_IMMEDIATE(r4, MSR_KERNEL) mtspr SPRN_SRR0,r3 @@ -652,11 +652,11 @@ __secondary_start: * zero the stack back-chain pointer and get the TOC virtual address * before going into C code. */ -_GLOBAL(start_secondary_prolog) +start_secondary_prolog: ld r2,PACATOC(r13) li r3,0 std r3,0(r1) /* Zero the stack frame pointer */ - bl .start_secondary + bl start_secondary b . /* * Reset stack pointer and call start_secondary @@ -667,14 +667,14 @@ _GLOBAL(start_secondary_resume) ld r1,PACAKSAVE(r13) /* Reload kernel stack pointer */ li r3,0 std r3,0(r1) /* Zero the stack frame pointer */ - bl .start_secondary + bl start_secondary b . #endif /* * This subroutine clobbers r11 and r12 */ -_GLOBAL(enable_64b_mode) +enable_64b_mode: mfmsr r11 /* grab the current MSR */ #ifdef CONFIG_PPC_BOOK3E oris r11,r11,0x8000 /* CM bit set, we'll set ICM later */ @@ -715,9 +715,9 @@ p_toc: .llong __toc_start + 0x8000 - 0b /* * This is where the main kernel code starts. */ -_INIT_STATIC(start_here_multiplatform) +start_here_multiplatform: /* set up the TOC */ - bl .relative_toc + bl relative_toc tovirt(r2,r2) /* Clear out the BSS. It may have been done in prom_init, @@ -776,9 +776,9 @@ _INIT_STATIC(start_here_multiplatform) /* Restore parameters passed from prom_init/kexec */ mr r3,r31 - bl .early_setup /* also sets r13 and SPRG_PACA */ + bl early_setup /* also sets r13 and SPRG_PACA */ - LOAD_REG_ADDR(r3, .start_here_common) + LOAD_REG_ADDR(r3, start_here_common) ld r4,PACAKMSR(r13) mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 @@ -786,7 +786,8 @@ _INIT_STATIC(start_here_multiplatform) b . /* prevent speculative execution */ /* This is where all platforms converge execution */ -_INIT_GLOBAL(start_here_common) + +start_here_common: /* relocation is on at this point */ std r1,PACAKSAVE(r13) @@ -794,7 +795,7 @@ _INIT_GLOBAL(start_here_common) ld r2,PACATOC(r13) /* Do more system initializations in virtual mode */ - bl .setup_system + bl setup_system /* Mark interrupts soft and hard disabled (they might be enabled * in the PACA when doing hotplug) @@ -805,7 +806,7 @@ _INIT_GLOBAL(start_here_common) stb r0,PACAIRQHAPPENED(r13) /* Generic kernel entry */ - bl .start_kernel + bl start_kernel /* Not reached */ BUG_OPCODE diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index b0a1792279bb..0bb5918faaaf 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -72,7 +72,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp) * If so, DABR will be populated in single_step_dabr_instruction(). */ if (current->thread.last_hit_ubp != bp) - set_breakpoint(info); + __set_breakpoint(info); return 0; } @@ -198,7 +198,7 @@ void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs) info = counter_arch_bp(tsk->thread.last_hit_ubp); regs->msr &= ~MSR_SE; - set_breakpoint(info); + __set_breakpoint(info); tsk->thread.last_hit_ubp = NULL; } @@ -284,7 +284,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) if (!(info->type & HW_BRK_TYPE_EXTRANEOUS_IRQ)) perf_bp_event(bp, regs); - set_breakpoint(info); + __set_breakpoint(info); out: rcu_read_unlock(); return rc; @@ -316,7 +316,7 @@ int __kprobes single_step_dabr_instruction(struct die_args *args) if (!(info->type & HW_BRK_TYPE_EXTRANEOUS_IRQ)) perf_bp_event(bp, regs); - set_breakpoint(info); + __set_breakpoint(info); current->thread.last_hit_ubp = NULL; /* diff --git a/arch/powerpc/kernel/idle_book3e.S b/arch/powerpc/kernel/idle_book3e.S index bfb73cc209ce..48c21acef915 100644 --- a/arch/powerpc/kernel/idle_book3e.S +++ b/arch/powerpc/kernel/idle_book3e.S @@ -43,7 +43,7 @@ _GLOBAL(\name) */ #ifdef CONFIG_TRACE_IRQFLAGS stdu r1,-128(r1) - bl .trace_hardirqs_on + bl trace_hardirqs_on addi r1,r1,128 #endif li r0,1 diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S index e3edaa189911..f57a19348bdd 100644 --- a/arch/powerpc/kernel/idle_power4.S +++ b/arch/powerpc/kernel/idle_power4.S @@ -46,7 +46,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP) mflr r0 std r0,16(r1) stdu r1,-128(r1) - bl .trace_hardirqs_on + bl trace_hardirqs_on addi r1,r1,128 ld r0,16(r1) mtlr r0 diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index c3ab86975614..2480256272d4 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -39,6 +39,10 @@ * Pass requested state in r3: * 0 - nap * 1 - sleep + * + * To check IRQ_HAPPENED in r4 + * 0 - don't check + * 1 - check */ _GLOBAL(power7_powersave_common) /* Use r3 to pass state nap/sleep/winkle */ @@ -58,7 +62,7 @@ _GLOBAL(power7_powersave_common) /* Make sure FPU, VSX etc... are flushed as we may lose * state when going to nap mode */ - bl .discard_lazy_cpu_state + bl discard_lazy_cpu_state #endif /* CONFIG_SMP */ /* Hard disable interrupts */ @@ -71,6 +75,8 @@ _GLOBAL(power7_powersave_common) lbz r0,PACAIRQHAPPENED(r13) cmpwi cr0,r0,0 beq 1f + cmpwi cr0,r4,0 + beq 1f addi r1,r1,INT_FRAME_SIZE ld r0,16(r1) mtlr r0 @@ -114,15 +120,18 @@ _GLOBAL(power7_idle) lwz r4,ADDROFF(powersave_nap)(r3) cmpwi 0,r4,0 beqlr + li r3, 1 /* fall through */ _GLOBAL(power7_nap) + mr r4,r3 li r3,0 b power7_powersave_common /* No return */ _GLOBAL(power7_sleep) li r3,1 + li r4,0 b power7_powersave_common /* No return */ @@ -168,7 +177,7 @@ _GLOBAL(power7_wakeup_loss) _GLOBAL(power7_wakeup_noloss) lbz r0,PACA_NAPSTATELOST(r13) cmpwi r0,0 - bne .power7_wakeup_loss + bne power7_wakeup_loss ld r1,PACAR1(r13) ld r4,_MSR(r1) ld r5,_NIP(r1) diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 40bd7bd4e19a..936258881c98 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -48,6 +48,9 @@ static struct of_device_id legacy_serial_parents[] __initdata = { static unsigned int legacy_serial_count; static int legacy_serial_console = -1; +static const upf_t legacy_port_flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_SHARE_IRQ | UPF_FIXED_PORT; + static unsigned int tsi_serial_in(struct uart_port *p, int offset) { unsigned int tmp; @@ -71,8 +74,9 @@ static int __init add_legacy_port(struct device_node *np, int want_index, phys_addr_t taddr, unsigned long irq, upf_t flags, int irq_check_parent) { - const __be32 *clk, *spd; + const __be32 *clk, *spd, *rs; u32 clock = BASE_BAUD * 16; + u32 shift = 0; int index; /* get clock freq. if present */ @@ -83,6 +87,11 @@ static int __init add_legacy_port(struct device_node *np, int want_index, /* get default speed if present */ spd = of_get_property(np, "current-speed", NULL); + /* get register shift if present */ + rs = of_get_property(np, "reg-shift", NULL); + if (rs && *rs) + shift = be32_to_cpup(rs); + /* If we have a location index, then try to use it */ if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS) index = want_index; @@ -126,6 +135,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index, legacy_serial_ports[index].uartclk = clock; legacy_serial_ports[index].irq = irq; legacy_serial_ports[index].flags = flags; + legacy_serial_ports[index].regshift = shift; legacy_serial_infos[index].taddr = taddr; legacy_serial_infos[index].np = of_node_get(np); legacy_serial_infos[index].clock = clock; @@ -153,8 +163,6 @@ static int __init add_legacy_soc_port(struct device_node *np, { u64 addr; const __be32 *addrp; - upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ - | UPF_FIXED_PORT; struct device_node *tsi = of_get_parent(np); /* We only support ports that have a clock frequency properly @@ -163,9 +171,8 @@ static int __init add_legacy_soc_port(struct device_node *np, if (of_get_property(np, "clock-frequency", NULL) == NULL) return -1; - /* if reg-shift or offset, don't try to use it */ - if ((of_get_property(np, "reg-shift", NULL) != NULL) || - (of_get_property(np, "reg-offset", NULL) != NULL)) + /* if reg-offset don't try to use it */ + if ((of_get_property(np, "reg-offset", NULL) != NULL)) return -1; /* if rtas uses this device, don't try to use it as well */ @@ -185,9 +192,11 @@ static int __init add_legacy_soc_port(struct device_node *np, * IO port value. It will be fixed up later along with the irq */ if (tsi && !strcmp(tsi->type, "tsi-bridge")) - return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0); + return add_legacy_port(np, -1, UPIO_TSI, addr, addr, + NO_IRQ, legacy_port_flags, 0); else - return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0); + return add_legacy_port(np, -1, UPIO_MEM, addr, addr, + NO_IRQ, legacy_port_flags, 0); } static int __init add_legacy_isa_port(struct device_node *np, @@ -233,7 +242,7 @@ static int __init add_legacy_isa_port(struct device_node *np, /* Add port, irq will be dealt with later */ return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]), - taddr, NO_IRQ, UPF_BOOT_AUTOCONF, 0); + taddr, NO_IRQ, legacy_port_flags, 0); } @@ -306,7 +315,7 @@ static int __init add_legacy_pci_port(struct device_node *np, * IO port value. It will be fixed up later along with the irq */ return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, - UPF_BOOT_AUTOCONF, np != pci_dev); + legacy_port_flags, np != pci_dev); } #endif @@ -315,17 +324,20 @@ static void __init setup_legacy_serial_console(int console) struct legacy_serial_info *info = &legacy_serial_infos[console]; struct plat_serial8250_port *port = &legacy_serial_ports[console]; void __iomem *addr; + unsigned int stride; + + stride = 1 << port->regshift; /* Check if a translated MMIO address has been found */ if (info->taddr) { addr = ioremap(info->taddr, 0x1000); if (addr == NULL) return; - udbg_uart_init_mmio(addr, 1); + udbg_uart_init_mmio(addr, stride); } else { /* Check if it's PIO and we support untranslated PIO */ if (port->iotype == UPIO_PORT && isa_io_special) - udbg_uart_init_pio(port->iobase, 1); + udbg_uart_init_pio(port->iobase, stride); else return; } diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 3d0249599d52..4e314b90c75d 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -34,7 +34,7 @@ _GLOBAL(call_do_softirq) std r0,16(r1) stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3) mr r1,r3 - bl .__do_softirq + bl __do_softirq ld r1,0(r1) ld r0,16(r1) mtlr r0 @@ -45,7 +45,7 @@ _GLOBAL(call_do_irq) std r0,16(r1) stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4) mr r1,r4 - bl .__do_irq + bl __do_irq ld r1,0(r1) ld r0,16(r1) mtlr r0 @@ -506,7 +506,7 @@ _GLOBAL(kexec_smp_wait) stb r4,PACAKEXECSTATE(r13) SYNC - b .kexec_wait + b kexec_wait /* * switch to real mode (turn mmu off) @@ -576,7 +576,7 @@ _GLOBAL(kexec_sequence) /* copy dest pages, flush whole dest image */ mr r3,r29 - bl .kexec_copy_flush /* (image) */ + bl kexec_copy_flush /* (image) */ /* turn off mmu */ bl real_mode @@ -586,7 +586,7 @@ _GLOBAL(kexec_sequence) mr r4,r30 /* start, aka phys mem offset */ li r5,0x100 li r6,0 - bl .copy_and_flush /* (dest, src, copy limit, start offset) */ + bl copy_and_flush /* (dest, src, copy limit, start offset) */ 1: /* assume normal blr return */ /* release other cpus to the new kernel secondary start at 0x60 */ @@ -595,8 +595,12 @@ _GLOBAL(kexec_sequence) stw r6,kexec_flag-1b(5) /* clear out hardware hash page table and tlb */ - ld r5,0(r27) /* deref function descriptor */ - mtctr r5 +#if !defined(_CALL_ELF) || _CALL_ELF != 2 + ld r12,0(r27) /* deref function descriptor */ +#else + mr r12,r27 +#endif + mtctr r12 bctrl /* ppc_md.hpte_clear_all(void); */ /* @@ -630,3 +634,31 @@ _GLOBAL(kexec_sequence) li r5,0 blr /* image->start(physid, image->start, 0); */ #endif /* CONFIG_KEXEC */ + +#ifdef CONFIG_MODULES +#if defined(_CALL_ELF) && _CALL_ELF == 2 + +#ifdef CONFIG_MODVERSIONS +.weak __crc_TOC. +.section "___kcrctab+TOC.","a" +.globl __kcrctab_TOC. +__kcrctab_TOC.: + .llong __crc_TOC. +#endif + +/* + * Export a fake .TOC. since both modpost and depmod will complain otherwise. + * Both modpost and depmod strip the leading . so we do the same here. + */ +.section "__ksymtab_strings","a" +__kstrtab_TOC.: + .asciz "TOC." + +.section "___ksymtab+TOC.","a" +/* This symbol name is important: it's used by modpost to find exported syms */ +.globl __ksymtab_TOC. +__ksymtab_TOC.: + .llong 0 /* .value */ + .llong __kstrtab_TOC. +#endif /* ELFv2 */ +#endif /* MODULES */ diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index 12664c130d73..077d2ce6c5a7 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -22,6 +22,7 @@ #include <linux/vmalloc.h> #include <linux/ftrace.h> #include <linux/bug.h> +#include <linux/uaccess.h> #include <asm/module.h> #include <asm/firmware.h> #include <asm/code-patching.h> @@ -41,46 +42,170 @@ #define DEBUGP(fmt , ...) #endif +#if defined(_CALL_ELF) && _CALL_ELF == 2 +#define R2_STACK_OFFSET 24 + +/* An address is simply the address of the function. */ +typedef unsigned long func_desc_t; + +static func_desc_t func_desc(unsigned long addr) +{ + return addr; +} +static unsigned long func_addr(unsigned long addr) +{ + return addr; +} +static unsigned long stub_func_addr(func_desc_t func) +{ + return func; +} + +/* PowerPC64 specific values for the Elf64_Sym st_other field. */ +#define STO_PPC64_LOCAL_BIT 5 +#define STO_PPC64_LOCAL_MASK (7 << STO_PPC64_LOCAL_BIT) +#define PPC64_LOCAL_ENTRY_OFFSET(other) \ + (((1 << (((other) & STO_PPC64_LOCAL_MASK) >> STO_PPC64_LOCAL_BIT)) >> 2) << 2) + +static unsigned int local_entry_offset(const Elf64_Sym *sym) +{ + /* sym->st_other indicates offset to local entry point + * (otherwise it will assume r12 is the address of the start + * of function and try to derive r2 from it). */ + return PPC64_LOCAL_ENTRY_OFFSET(sym->st_other); +} +#else +#define R2_STACK_OFFSET 40 + +/* An address is address of the OPD entry, which contains address of fn. */ +typedef struct ppc64_opd_entry func_desc_t; + +static func_desc_t func_desc(unsigned long addr) +{ + return *(struct ppc64_opd_entry *)addr; +} +static unsigned long func_addr(unsigned long addr) +{ + return func_desc(addr).funcaddr; +} +static unsigned long stub_func_addr(func_desc_t func) +{ + return func.funcaddr; +} +static unsigned int local_entry_offset(const Elf64_Sym *sym) +{ + return 0; +} +#endif + /* Like PPC32, we need little trampolines to do > 24-bit jumps (into the kernel itself). But on PPC64, these need to be used for every jump, actually, to reset r2 (TOC+0x8000). */ struct ppc64_stub_entry { - /* 28 byte jump instruction sequence (7 instructions) */ - unsigned char jump[28]; - unsigned char unused[4]; + /* 28 byte jump instruction sequence (7 instructions). We only + * need 6 instructions on ABIv2 but we always allocate 7 so + * so we don't have to modify the trampoline load instruction. */ + u32 jump[7]; + u32 unused; /* Data for the above code */ - struct ppc64_opd_entry opd; + func_desc_t funcdata; }; -/* We use a stub to fix up r2 (TOC ptr) and to jump to the (external) - function which may be more than 24-bits away. We could simply - patch the new r2 value and function pointer into the stub, but it's - significantly shorter to put these values at the end of the stub - code, and patch the stub address (32-bits relative to the TOC ptr, - r2) into the stub. */ -static struct ppc64_stub_entry ppc64_stub = -{ .jump = { -#ifdef __LITTLE_ENDIAN__ - 0x00, 0x00, 0x82, 0x3d, /* addis r12,r2, <high> */ - 0x00, 0x00, 0x8c, 0x39, /* addi r12,r12, <low> */ - /* Save current r2 value in magic place on the stack. */ - 0x28, 0x00, 0x41, 0xf8, /* std r2,40(r1) */ - 0x20, 0x00, 0x6c, 0xe9, /* ld r11,32(r12) */ - 0x28, 0x00, 0x4c, 0xe8, /* ld r2,40(r12) */ - 0xa6, 0x03, 0x69, 0x7d, /* mtctr r11 */ - 0x20, 0x04, 0x80, 0x4e /* bctr */ -#else - 0x3d, 0x82, 0x00, 0x00, /* addis r12,r2, <high> */ - 0x39, 0x8c, 0x00, 0x00, /* addi r12,r12, <low> */ +/* + * PPC64 uses 24 bit jumps, but we need to jump into other modules or + * the kernel which may be further. So we jump to a stub. + * + * For ELFv1 we need to use this to set up the new r2 value (aka TOC + * pointer). For ELFv2 it's the callee's responsibility to set up the + * new r2, but for both we need to save the old r2. + * + * We could simply patch the new r2 value and function pointer into + * the stub, but it's significantly shorter to put these values at the + * end of the stub code, and patch the stub address (32-bits relative + * to the TOC ptr, r2) into the stub. + */ + +static u32 ppc64_stub_insns[] = { + 0x3d620000, /* addis r11,r2, <high> */ + 0x396b0000, /* addi r11,r11, <low> */ /* Save current r2 value in magic place on the stack. */ - 0xf8, 0x41, 0x00, 0x28, /* std r2,40(r1) */ - 0xe9, 0x6c, 0x00, 0x20, /* ld r11,32(r12) */ - 0xe8, 0x4c, 0x00, 0x28, /* ld r2,40(r12) */ - 0x7d, 0x69, 0x03, 0xa6, /* mtctr r11 */ - 0x4e, 0x80, 0x04, 0x20 /* bctr */ + 0xf8410000|R2_STACK_OFFSET, /* std r2,R2_STACK_OFFSET(r1) */ + 0xe98b0020, /* ld r12,32(r11) */ +#if !defined(_CALL_ELF) || _CALL_ELF != 2 + /* Set up new r2 from function descriptor */ + 0xe84b0028, /* ld r2,40(r11) */ +#endif + 0x7d8903a6, /* mtctr r12 */ + 0x4e800420 /* bctr */ +}; + +#ifdef CONFIG_DYNAMIC_FTRACE + +static u32 ppc64_stub_mask[] = { + 0xffff0000, + 0xffff0000, + 0xffffffff, + 0xffffffff, +#if !defined(_CALL_ELF) || _CALL_ELF != 2 + 0xffffffff, +#endif + 0xffffffff, + 0xffffffff +}; + +bool is_module_trampoline(u32 *p) +{ + unsigned int i; + u32 insns[ARRAY_SIZE(ppc64_stub_insns)]; + + BUILD_BUG_ON(sizeof(ppc64_stub_insns) != sizeof(ppc64_stub_mask)); + + if (probe_kernel_read(insns, p, sizeof(insns))) + return -EFAULT; + + for (i = 0; i < ARRAY_SIZE(ppc64_stub_insns); i++) { + u32 insna = insns[i]; + u32 insnb = ppc64_stub_insns[i]; + u32 mask = ppc64_stub_mask[i]; + + if ((insna & mask) != (insnb & mask)) + return false; + } + + return true; +} + +int module_trampoline_target(struct module *mod, u32 *trampoline, + unsigned long *target) +{ + u32 buf[2]; + u16 upper, lower; + long offset; + void *toc_entry; + + if (probe_kernel_read(buf, trampoline, sizeof(buf))) + return -EFAULT; + + upper = buf[0] & 0xffff; + lower = buf[1] & 0xffff; + + /* perform the addis/addi, both signed */ + offset = ((short)upper << 16) + (short)lower; + + /* + * Now get the address this trampoline jumps to. This + * is always 32 bytes into our trampoline stub. + */ + toc_entry = (void *)mod->arch.toc + offset + 32; + + if (probe_kernel_read(target, toc_entry, sizeof(*target))) + return -EFAULT; + + return 0; +} + #endif -} }; /* Count how many different 24-bit relocations (different symbol, different addend) */ @@ -183,6 +308,7 @@ static unsigned long get_stubs_size(const Elf64_Ehdr *hdr, return relocs * sizeof(struct ppc64_stub_entry); } +/* Still needed for ELFv2, for .TOC. */ static void dedotify_versions(struct modversion_info *vers, unsigned long size) { @@ -193,7 +319,7 @@ static void dedotify_versions(struct modversion_info *vers, memmove(vers->name, vers->name+1, strlen(vers->name)); } -/* Undefined symbols which refer to .funcname, hack to funcname */ +/* Undefined symbols which refer to .funcname, hack to funcname (or .TOC.) */ static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab) { unsigned int i; @@ -207,6 +333,24 @@ static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab) } } +static Elf64_Sym *find_dot_toc(Elf64_Shdr *sechdrs, + const char *strtab, + unsigned int symindex) +{ + unsigned int i, numsyms; + Elf64_Sym *syms; + + syms = (Elf64_Sym *)sechdrs[symindex].sh_addr; + numsyms = sechdrs[symindex].sh_size / sizeof(Elf64_Sym); + + for (i = 1; i < numsyms; i++) { + if (syms[i].st_shndx == SHN_UNDEF + && strcmp(strtab + syms[i].st_name, "TOC.") == 0) + return &syms[i]; + } + return NULL; +} + int module_frob_arch_sections(Elf64_Ehdr *hdr, Elf64_Shdr *sechdrs, char *secstrings, @@ -271,21 +415,12 @@ static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me) /* Patch stub to reference function and correct r2 value. */ static inline int create_stub(Elf64_Shdr *sechdrs, struct ppc64_stub_entry *entry, - struct ppc64_opd_entry *opd, + unsigned long addr, struct module *me) { - Elf64_Half *loc1, *loc2; long reladdr; - *entry = ppc64_stub; - -#ifdef __LITTLE_ENDIAN__ - loc1 = (Elf64_Half *)&entry->jump[0]; - loc2 = (Elf64_Half *)&entry->jump[4]; -#else - loc1 = (Elf64_Half *)&entry->jump[2]; - loc2 = (Elf64_Half *)&entry->jump[6]; -#endif + memcpy(entry->jump, ppc64_stub_insns, sizeof(ppc64_stub_insns)); /* Stub uses address relative to r2. */ reladdr = (unsigned long)entry - my_r2(sechdrs, me); @@ -296,35 +431,33 @@ static inline int create_stub(Elf64_Shdr *sechdrs, } DEBUGP("Stub %p get data from reladdr %li\n", entry, reladdr); - *loc1 = PPC_HA(reladdr); - *loc2 = PPC_LO(reladdr); - entry->opd.funcaddr = opd->funcaddr; - entry->opd.r2 = opd->r2; + entry->jump[0] |= PPC_HA(reladdr); + entry->jump[1] |= PPC_LO(reladdr); + entry->funcdata = func_desc(addr); return 1; } -/* Create stub to jump to function described in this OPD: we need the +/* Create stub to jump to function described in this OPD/ptr: we need the stub to set up the TOC ptr (r2) for the function. */ static unsigned long stub_for_addr(Elf64_Shdr *sechdrs, - unsigned long opdaddr, + unsigned long addr, struct module *me) { struct ppc64_stub_entry *stubs; - struct ppc64_opd_entry *opd = (void *)opdaddr; unsigned int i, num_stubs; num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*stubs); /* Find this stub, or if that fails, the next avail. entry */ stubs = (void *)sechdrs[me->arch.stubs_section].sh_addr; - for (i = 0; stubs[i].opd.funcaddr; i++) { + for (i = 0; stub_func_addr(stubs[i].funcdata); i++) { BUG_ON(i >= num_stubs); - if (stubs[i].opd.funcaddr == opd->funcaddr) + if (stub_func_addr(stubs[i].funcdata) == func_addr(addr)) return (unsigned long)&stubs[i]; } - if (!create_stub(sechdrs, &stubs[i], opd, me)) + if (!create_stub(sechdrs, &stubs[i], addr, me)) return 0; return (unsigned long)&stubs[i]; @@ -339,7 +472,8 @@ static int restore_r2(u32 *instruction, struct module *me) me->name, *instruction); return 0; } - *instruction = 0xe8410028; /* ld r2,40(r1) */ + /* ld r2,R2_STACK_OFFSET(r1) */ + *instruction = 0xe8410000 | R2_STACK_OFFSET; return 1; } @@ -357,6 +491,17 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, DEBUGP("Applying ADD relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); + + /* First time we're called, we can fix up .TOC. */ + if (!me->arch.toc_fixed) { + sym = find_dot_toc(sechdrs, strtab, symindex); + /* It's theoretically possible that a module doesn't want a + * .TOC. so don't fail it just for that. */ + if (sym) + sym->st_value = my_r2(sechdrs, me); + me->arch.toc_fixed = true; + } + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) { /* This is where to make the change */ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr @@ -453,7 +598,8 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, return -ENOENT; if (!restore_r2((u32 *)location + 1, me)) return -ENOEXEC; - } + } else + value += local_entry_offset(sym); /* Convert value to relative */ value -= (unsigned long)location; @@ -474,6 +620,31 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, *location = value - (unsigned long)location; break; + case R_PPC64_TOCSAVE: + /* + * Marker reloc indicates we don't have to save r2. + * That would only save us one instruction, so ignore + * it. + */ + break; + + case R_PPC64_REL16_HA: + /* Subtract location pointer */ + value -= (unsigned long)location; + value = ((value + 0x8000) >> 16); + *((uint16_t *) location) + = (*((uint16_t *) location) & ~0xffff) + | (value & 0xffff); + break; + + case R_PPC64_REL16_LO: + /* Subtract location pointer */ + value -= (unsigned long)location; + *((uint16_t *) location) + = (*((uint16_t *) location) & ~0xffff) + | (value & 0xffff); + break; + default: printk("%s: Unknown ADD relocation: %lu\n", me->name, diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 24d342e91790..b49c72fd7f16 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -21,6 +21,7 @@ #include <linux/string.h> #include <linux/init.h> #include <linux/bootmem.h> +#include <linux/delay.h> #include <linux/export.h> #include <linux/of_address.h> #include <linux/of_pci.h> @@ -120,6 +121,25 @@ resource_size_t pcibios_window_alignment(struct pci_bus *bus, return 1; } +void pcibios_reset_secondary_bus(struct pci_dev *dev) +{ + u16 ctrl; + + if (ppc_md.pcibios_reset_secondary_bus) { + ppc_md.pcibios_reset_secondary_bus(dev); + return; + } + + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl); + ctrl |= PCI_BRIDGE_CTL_BUS_RESET; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl); + msleep(2); + + ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl); + ssleep(1); +} + static resource_size_t pcibios_io_size(const struct pci_controller *hose) { #ifdef CONFIG_PPC64 @@ -646,60 +666,36 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, void pci_process_bridge_OF_ranges(struct pci_controller *hose, struct device_node *dev, int primary) { - const __be32 *ranges; - int rlen; - int pna = of_n_addr_cells(dev); - int np = pna + 5; int memno = 0; - u32 pci_space; - unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size; struct resource *res; + struct of_pci_range range; + struct of_pci_range_parser parser; printk(KERN_INFO "PCI host bridge %s %s ranges:\n", dev->full_name, primary ? "(primary)" : ""); - /* Get ranges property */ - ranges = of_get_property(dev, "ranges", &rlen); - if (ranges == NULL) + /* Check for ranges property */ + if (of_pci_range_parser_init(&parser, dev)) return; /* Parse it */ - while ((rlen -= np * 4) >= 0) { - /* Read next ranges element */ - pci_space = of_read_number(ranges, 1); - pci_addr = of_read_number(ranges + 1, 2); - cpu_addr = of_translate_address(dev, ranges + 3); - size = of_read_number(ranges + pna + 3, 2); - ranges += np; - + for_each_of_pci_range(&parser, &range) { /* If we failed translation or got a zero-sized region * (some FW try to feed us with non sensical zero sized regions * such as power3 which look like some kind of attempt at exposing * the VGA memory hole) */ - if (cpu_addr == OF_BAD_ADDR || size == 0) + if (range.cpu_addr == OF_BAD_ADDR || range.size == 0) continue; - /* Now consume following elements while they are contiguous */ - for (; rlen >= np * sizeof(u32); - ranges += np, rlen -= np * 4) { - if (of_read_number(ranges, 1) != pci_space) - break; - pci_next = of_read_number(ranges + 1, 2); - cpu_next = of_translate_address(dev, ranges + 3); - if (pci_next != pci_addr + size || - cpu_next != cpu_addr + size) - break; - size += of_read_number(ranges + pna + 3, 2); - } - /* Act based on address space type */ res = NULL; - switch ((pci_space >> 24) & 0x3) { - case 1: /* PCI IO space */ + switch (range.flags & IORESOURCE_TYPE_BITS) { + case IORESOURCE_IO: printk(KERN_INFO " IO 0x%016llx..0x%016llx -> 0x%016llx\n", - cpu_addr, cpu_addr + size - 1, pci_addr); + range.cpu_addr, range.cpu_addr + range.size - 1, + range.pci_addr); /* We support only one IO range */ if (hose->pci_io_size) { @@ -709,11 +705,12 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose, } #ifdef CONFIG_PPC32 /* On 32 bits, limit I/O space to 16MB */ - if (size > 0x01000000) - size = 0x01000000; + if (range.size > 0x01000000) + range.size = 0x01000000; /* 32 bits needs to map IOs here */ - hose->io_base_virt = ioremap(cpu_addr, size); + hose->io_base_virt = ioremap(range.cpu_addr, + range.size); /* Expect trouble if pci_addr is not 0 */ if (primary) @@ -723,20 +720,20 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose, /* pci_io_size and io_base_phys always represent IO * space starting at 0 so we factor in pci_addr */ - hose->pci_io_size = pci_addr + size; - hose->io_base_phys = cpu_addr - pci_addr; + hose->pci_io_size = range.pci_addr + range.size; + hose->io_base_phys = range.cpu_addr - range.pci_addr; /* Build resource */ res = &hose->io_resource; - res->flags = IORESOURCE_IO; - res->start = pci_addr; + range.cpu_addr = range.pci_addr; break; - case 2: /* PCI Memory space */ - case 3: /* PCI 64 bits Memory space */ + case IORESOURCE_MEM: printk(KERN_INFO " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n", - cpu_addr, cpu_addr + size - 1, pci_addr, - (pci_space & 0x40000000) ? "Prefetch" : ""); + range.cpu_addr, range.cpu_addr + range.size - 1, + range.pci_addr, + (range.pci_space & 0x40000000) ? + "Prefetch" : ""); /* We support only 3 memory ranges */ if (memno >= 3) { @@ -745,28 +742,21 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose, continue; } /* Handles ISA memory hole space here */ - if (pci_addr == 0) { + if (range.pci_addr == 0) { if (primary || isa_mem_base == 0) - isa_mem_base = cpu_addr; - hose->isa_mem_phys = cpu_addr; - hose->isa_mem_size = size; + isa_mem_base = range.cpu_addr; + hose->isa_mem_phys = range.cpu_addr; + hose->isa_mem_size = range.size; } /* Build resource */ - hose->mem_offset[memno] = cpu_addr - pci_addr; + hose->mem_offset[memno] = range.cpu_addr - + range.pci_addr; res = &hose->mem_resources[memno++]; - res->flags = IORESOURCE_MEM; - if (pci_space & 0x40000000) - res->flags |= IORESOURCE_PREFETCH; - res->start = cpu_addr; break; } if (res != NULL) { - res->name = dev->full_name; - res->end = res->start + size - 1; - res->parent = NULL; - res->sibling = NULL; - res->child = NULL; + of_pci_range_to_resource(&range, dev, res); } } } diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index 059e244484fe..44562aa97f16 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -304,6 +304,9 @@ static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus, struct pci_dev *dev = NULL; const __be32 *reg; int reglen, devfn; +#ifdef CONFIG_EEH + struct eeh_dev *edev = of_node_to_eeh_dev(dn); +#endif pr_debug(" * %s\n", dn->full_name); if (!of_device_is_available(dn)) @@ -321,6 +324,12 @@ static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus, return dev; } + /* Device removed permanently ? */ +#ifdef CONFIG_EEH + if (edev && (edev->mode & EEH_DEV_REMOVED)) + return NULL; +#endif + /* create a new pci_dev for this device */ dev = of_create_pci_dev(dn, bus, devfn); if (!dev) diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 450850a49dce..48d17d6fca5b 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -155,9 +155,7 @@ EXPORT_SYMBOL(__cmpdi2); #endif long long __bswapdi2(long long); EXPORT_SYMBOL(__bswapdi2); -#ifdef __BIG_ENDIAN__ EXPORT_SYMBOL(memcpy); -#endif EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(memcmp); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 31d021506d21..8a1edbe26b8f 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -54,6 +54,7 @@ #ifdef CONFIG_PPC64 #include <asm/firmware.h> #endif +#include <asm/code-patching.h> #include <linux/kprobes.h> #include <linux/kdebug.h> @@ -495,14 +496,21 @@ static inline int set_dawr(struct arch_hw_breakpoint *brk) return 0; } -int set_breakpoint(struct arch_hw_breakpoint *brk) +void __set_breakpoint(struct arch_hw_breakpoint *brk) { __get_cpu_var(current_brk) = *brk; if (cpu_has_feature(CPU_FTR_DAWR)) - return set_dawr(brk); + set_dawr(brk); + else + set_dabr(brk); +} - return set_dabr(brk); +void set_breakpoint(struct arch_hw_breakpoint *brk) +{ + preempt_disable(); + __set_breakpoint(brk); + preempt_enable(); } #ifdef CONFIG_PPC64 @@ -834,7 +842,7 @@ struct task_struct *__switch_to(struct task_struct *prev, */ #ifndef CONFIG_HAVE_HW_BREAKPOINT if (unlikely(!hw_brk_match(&__get_cpu_var(current_brk), &new->thread.hw_brk))) - set_breakpoint(&new->thread.hw_brk); + __set_breakpoint(&new->thread.hw_brk); #endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif @@ -1108,7 +1116,9 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, struct thread_info *ti = (void *)task_stack_page(p); memset(childregs, 0, sizeof(struct pt_regs)); childregs->gpr[1] = sp + sizeof(struct pt_regs); - childregs->gpr[14] = usp; /* function */ + /* function */ + if (usp) + childregs->gpr[14] = ppc_function_entry((void *)usp); #ifdef CONFIG_PPC64 clear_tsk_thread_flag(p, TIF_32BIT); childregs->softe = 1; @@ -1187,17 +1197,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, if (cpu_has_feature(CPU_FTR_HAS_PPR)) p->thread.ppr = INIT_PPR; #endif - /* - * The PPC64 ABI makes use of a TOC to contain function - * pointers. The function (ret_from_except) is actually a pointer - * to the TOC entry. The first entry is a pointer to the actual - * function. - */ -#ifdef CONFIG_PPC64 - kregs->nip = *((unsigned long *)f); -#else - kregs->nip = (unsigned long)f; -#endif + kregs->nip = ppc_function_entry(f); return 0; } diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh index b0c263da219a..77aa1e95e904 100644 --- a/arch/powerpc/kernel/prom_init_check.sh +++ b/arch/powerpc/kernel/prom_init_check.sh @@ -23,7 +23,7 @@ strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224 reloc_got2 kernstart_addr memstart_addr linux_banner _stext opal_query_takeover opal_do_takeover opal_enter_rtas opal_secondary_entry boot_command_line __prom_init_toc_start __prom_init_toc_end -btext_setup_display" +btext_setup_display TOC." NM="$1" OBJ="$2" diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 7d4c7172f38e..c168337aef9d 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -80,10 +80,6 @@ int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val) if (ret) return PCIBIOS_DEVICE_NOT_FOUND; - if (returnval == EEH_IO_ERROR_VALUE(size) && - eeh_dev_check_failure(of_node_to_eeh_dev(pdn->node))) - return PCIBIOS_DEVICE_NOT_FOUND; - return PCIBIOS_SUCCESSFUL; } @@ -92,18 +88,39 @@ static int rtas_pci_read_config(struct pci_bus *bus, int where, int size, u32 *val) { struct device_node *busdn, *dn; - - busdn = pci_bus_to_OF_node(bus); + struct pci_dn *pdn; + bool found = false; +#ifdef CONFIG_EEH + struct eeh_dev *edev; +#endif + int ret; /* Search only direct children of the bus */ + *val = 0xFFFFFFFF; + busdn = pci_bus_to_OF_node(bus); for (dn = busdn->child; dn; dn = dn->sibling) { - struct pci_dn *pdn = PCI_DN(dn); + pdn = PCI_DN(dn); if (pdn && pdn->devfn == devfn - && of_device_is_available(dn)) - return rtas_read_config(pdn, where, size, val); + && of_device_is_available(dn)) { + found = true; + break; + } } - return PCIBIOS_DEVICE_NOT_FOUND; + if (!found) + return PCIBIOS_DEVICE_NOT_FOUND; +#ifdef CONFIG_EEH + edev = of_node_to_eeh_dev(dn); + if (edev && edev->pe && edev->pe->state & EEH_PE_RESET) + return PCIBIOS_DEVICE_NOT_FOUND; +#endif + + ret = rtas_read_config(pdn, where, size, val); + if (*val == EEH_IO_ERROR_VALUE(size) && + eeh_dev_check_failure(of_node_to_eeh_dev(dn))) + return PCIBIOS_DEVICE_NOT_FOUND; + + return ret; } int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val) @@ -136,17 +153,34 @@ static int rtas_pci_write_config(struct pci_bus *bus, int where, int size, u32 val) { struct device_node *busdn, *dn; - - busdn = pci_bus_to_OF_node(bus); + struct pci_dn *pdn; + bool found = false; +#ifdef CONFIG_EEH + struct eeh_dev *edev; +#endif + int ret; /* Search only direct children of the bus */ + busdn = pci_bus_to_OF_node(bus); for (dn = busdn->child; dn; dn = dn->sibling) { - struct pci_dn *pdn = PCI_DN(dn); + pdn = PCI_DN(dn); if (pdn && pdn->devfn == devfn - && of_device_is_available(dn)) - return rtas_write_config(pdn, where, size, val); + && of_device_is_available(dn)) { + found = true; + break; + } } - return PCIBIOS_DEVICE_NOT_FOUND; + + if (!found) + return PCIBIOS_DEVICE_NOT_FOUND; +#ifdef CONFIG_EEH + edev = of_node_to_eeh_dev(dn); + if (edev && edev->pe && (edev->pe->state & EEH_PE_RESET)) + return PCIBIOS_DEVICE_NOT_FOUND; +#endif + ret = rtas_write_config(pdn, where, size, val); + + return ret; } static struct pci_ops rtas_pci_ops = { diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 79b7612ac6fa..aa0f5edd8570 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -212,6 +212,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) { unsigned long cpu_id = (unsigned long)v - 1; unsigned int pvr; + unsigned long proc_freq; unsigned short maj; unsigned short min; @@ -263,12 +264,19 @@ static int show_cpuinfo(struct seq_file *m, void *v) #endif /* CONFIG_TAU */ /* - * Assume here that all clock rates are the same in a - * smp system. -- Cort + * Platforms that have variable clock rates, should implement + * the method ppc_md.get_proc_freq() that reports the clock + * rate of a given cpu. The rest can use ppc_proc_freq to + * report the clock rate that is same across all cpus. */ - if (ppc_proc_freq) + if (ppc_md.get_proc_freq) + proc_freq = ppc_md.get_proc_freq(cpu_id); + else + proc_freq = ppc_proc_freq; + + if (proc_freq) seq_printf(m, "clock\t\t: %lu.%06luMHz\n", - ppc_proc_freq / 1000000, ppc_proc_freq % 1000000); + proc_freq / 1000000, proc_freq % 1000000); if (ppc_md.show_percpuinfo != NULL) ppc_md.show_percpuinfo(m, cpu_id); @@ -382,9 +390,10 @@ void __init check_for_initrd(void) #ifdef CONFIG_SMP -int threads_per_core, threads_shift; +int threads_per_core, threads_per_subcore, threads_shift; cpumask_t threads_core_mask; EXPORT_SYMBOL_GPL(threads_per_core); +EXPORT_SYMBOL_GPL(threads_per_subcore); EXPORT_SYMBOL_GPL(threads_shift); EXPORT_SYMBOL_GPL(threads_core_mask); @@ -393,6 +402,7 @@ static void __init cpu_init_thread_core_maps(int tpc) int i; threads_per_core = tpc; + threads_per_subcore = tpc; cpumask_clear(&threads_core_mask); /* This implementation only supports power of 2 number of threads diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index fbe24377eda3..ee082d771178 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -36,6 +36,7 @@ #include <linux/lockdep.h> #include <linux/memblock.h> #include <linux/hugetlb.h> +#include <linux/memory.h> #include <asm/io.h> #include <asm/kdump.h> @@ -341,7 +342,7 @@ void smp_release_cpus(void) ptr = (unsigned long *)((unsigned long)&__secondary_hold_spinloop - PHYSICAL_START); - *ptr = __pa(generic_secondary_smp_init); + *ptr = ppc_function_entry(generic_secondary_smp_init); /* And wait a bit for them to catch up */ for (i = 0; i < 100000; i++) { @@ -780,6 +781,15 @@ void __init setup_per_cpu_areas(void) } #endif +#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE +unsigned long memory_block_size_bytes(void) +{ + if (ppc_md.memory_block_size) + return ppc_md.memory_block_size(); + + return MIN_MEMORY_BLOCK_SIZE; +} +#endif #if defined(CONFIG_PPC_INDIRECT_PIO) || defined(CONFIG_PPC_INDIRECT_MMIO) struct ppc_pci_io ppc_pci_io; diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 8fc4177ed65a..1c794cef2883 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -134,7 +134,7 @@ static int do_signal(struct pt_regs *regs) */ if (current->thread.hw_brk.address && current->thread.hw_brk.type) - set_breakpoint(¤t->thread.hw_brk); + __set_breakpoint(¤t->thread.hw_brk); #endif /* Re-enable the breakpoints for the signal stack */ thread_change_pc(current, regs); diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 10ffffef0414..7753af2d2613 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -36,6 +36,7 @@ #include <linux/atomic.h> #include <asm/irq.h> #include <asm/hw_irq.h> +#include <asm/kvm_ppc.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/prom.h> @@ -390,6 +391,7 @@ void smp_prepare_boot_cpu(void) #ifdef CONFIG_PPC64 paca[boot_cpuid].__current = current; #endif + set_numa_node(numa_cpu_lookup_table[boot_cpuid]); current_set[boot_cpuid] = task_thread_info(current); } @@ -457,38 +459,9 @@ int generic_check_cpu_restart(unsigned int cpu) return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE; } -static atomic_t secondary_inhibit_count; - -/* - * Don't allow secondary CPU threads to come online - */ -void inhibit_secondary_onlining(void) +static bool secondaries_inhibited(void) { - /* - * This makes secondary_inhibit_count stable during cpu - * online/offline operations. - */ - get_online_cpus(); - - atomic_inc(&secondary_inhibit_count); - put_online_cpus(); -} -EXPORT_SYMBOL_GPL(inhibit_secondary_onlining); - -/* - * Allow secondary CPU threads to come online again - */ -void uninhibit_secondary_onlining(void) -{ - get_online_cpus(); - atomic_dec(&secondary_inhibit_count); - put_online_cpus(); -} -EXPORT_SYMBOL_GPL(uninhibit_secondary_onlining); - -static int secondaries_inhibited(void) -{ - return atomic_read(&secondary_inhibit_count); + return kvm_hv_mode_active(); } #else /* HOTPLUG_CPU */ @@ -517,7 +490,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle) * Don't allow secondary threads to come online if inhibited */ if (threads_per_core > 1 && secondaries_inhibited() && - cpu % threads_per_core != 0) + cpu_thread_in_subcore(cpu)) return -EBUSY; if (smp_ops == NULL || @@ -750,6 +723,12 @@ void start_secondary(void *unused) } traverse_core_siblings(cpu, true); + /* + * numa_node_id() works after this. + */ + set_numa_node(numa_cpu_lookup_table[cpu]); + set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu])); + smp_wmb(); notify_cpu_starting(cpu); set_cpu_online(cpu, true); diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index d90d4b7810d6..67fd2fd2620a 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -404,7 +404,7 @@ void ppc_enable_pmcs(void) } EXPORT_SYMBOL(ppc_enable_pmcs); -#define __SYSFS_SPRSETUP(NAME, ADDRESS, EXTRA) \ +#define __SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, EXTRA) \ static void read_##NAME(void *val) \ { \ *(unsigned long *)val = mfspr(ADDRESS); \ @@ -413,7 +413,9 @@ static void write_##NAME(void *val) \ { \ EXTRA; \ mtspr(ADDRESS, *(unsigned long *)val); \ -} \ +} + +#define __SYSFS_SPRSETUP_SHOW_STORE(NAME) \ static ssize_t show_##NAME(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ @@ -436,10 +438,15 @@ static ssize_t __used \ return count; \ } -#define SYSFS_PMCSETUP(NAME, ADDRESS) \ - __SYSFS_SPRSETUP(NAME, ADDRESS, ppc_enable_pmcs()) -#define SYSFS_SPRSETUP(NAME, ADDRESS) \ - __SYSFS_SPRSETUP(NAME, ADDRESS, ) +#define SYSFS_PMCSETUP(NAME, ADDRESS) \ + __SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, ppc_enable_pmcs()) \ + __SYSFS_SPRSETUP_SHOW_STORE(NAME) +#define SYSFS_SPRSETUP(NAME, ADDRESS) \ + __SYSFS_SPRSETUP_READ_WRITE(NAME, ADDRESS, ) \ + __SYSFS_SPRSETUP_SHOW_STORE(NAME) + +#define SYSFS_SPRSETUP_SHOW_STORE(NAME) \ + __SYSFS_SPRSETUP_SHOW_STORE(NAME) /* Let's define all possible registers, we'll only hook up the ones * that are implemented on the current processor @@ -477,7 +484,6 @@ SYSFS_PMCSETUP(pmc8, SPRN_PMC8); SYSFS_PMCSETUP(mmcra, SPRN_MMCRA); SYSFS_SPRSETUP(purr, SPRN_PURR); SYSFS_SPRSETUP(spurr, SPRN_SPURR); -SYSFS_SPRSETUP(dscr, SPRN_DSCR); SYSFS_SPRSETUP(pir, SPRN_PIR); /* @@ -487,12 +493,27 @@ SYSFS_SPRSETUP(pir, SPRN_PIR); */ static DEVICE_ATTR(mmcra, 0600, show_mmcra, store_mmcra); static DEVICE_ATTR(spurr, 0400, show_spurr, NULL); -static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr); static DEVICE_ATTR(purr, 0400, show_purr, store_purr); static DEVICE_ATTR(pir, 0400, show_pir, NULL); -unsigned long dscr_default = 0; -EXPORT_SYMBOL(dscr_default); +static unsigned long dscr_default; + +static void read_dscr(void *val) +{ + *(unsigned long *)val = get_paca()->dscr_default; +} + +static void write_dscr(void *val) +{ + get_paca()->dscr_default = *(unsigned long *)val; + if (!current->thread.dscr_inherit) { + current->thread.dscr = *(unsigned long *)val; + mtspr(SPRN_DSCR, *(unsigned long *)val); + } +} + +SYSFS_SPRSETUP_SHOW_STORE(dscr); +static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr); static void add_write_permission_dev_attr(struct device_attribute *attr) { @@ -505,14 +526,6 @@ static ssize_t show_dscr_default(struct device *dev, return sprintf(buf, "%lx\n", dscr_default); } -static void update_dscr(void *dummy) -{ - if (!current->thread.dscr_inherit) { - current->thread.dscr = dscr_default; - mtspr(SPRN_DSCR, dscr_default); - } -} - static ssize_t __used store_dscr_default(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -525,7 +538,7 @@ static ssize_t __used store_dscr_default(struct device *dev, return -EINVAL; dscr_default = val; - on_each_cpu(update_dscr, NULL, 1); + on_each_cpu(write_dscr, &val, 1); return count; } diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S index 93219c34af32..895c50ca943c 100644 --- a/arch/powerpc/kernel/systbl.S +++ b/arch/powerpc/kernel/systbl.S @@ -17,12 +17,12 @@ #include <asm/ppc_asm.h> #ifdef CONFIG_PPC64 -#define SYSCALL(func) .llong .sys_##func,.sys_##func -#define COMPAT_SYS(func) .llong .sys_##func,.compat_sys_##func -#define PPC_SYS(func) .llong .ppc_##func,.ppc_##func -#define OLDSYS(func) .llong .sys_ni_syscall,.sys_ni_syscall -#define SYS32ONLY(func) .llong .sys_ni_syscall,.compat_sys_##func -#define SYSX(f, f3264, f32) .llong .f,.f3264 +#define SYSCALL(func) .llong DOTSYM(sys_##func),DOTSYM(sys_##func) +#define COMPAT_SYS(func) .llong DOTSYM(sys_##func),DOTSYM(compat_sys_##func) +#define PPC_SYS(func) .llong DOTSYM(ppc_##func),DOTSYM(ppc_##func) +#define OLDSYS(func) .llong DOTSYM(sys_ni_syscall),DOTSYM(sys_ni_syscall) +#define SYS32ONLY(func) .llong DOTSYM(sys_ni_syscall),DOTSYM(compat_sys_##func) +#define SYSX(f, f3264, f32) .llong DOTSYM(f),DOTSYM(f3264) #else #define SYSCALL(func) .long sys_##func #define COMPAT_SYS(func) .long sys_##func @@ -36,6 +36,8 @@ #define PPC_SYS_SPU(func) PPC_SYS(func) #define SYSX_SPU(f, f3264, f32) SYSX(f, f3264, f32) +.section .rodata,"a" + #ifdef CONFIG_PPC64 #define sys_sigpending sys_ni_syscall #define sys_old_getrlimit sys_ni_syscall @@ -43,5 +45,7 @@ .p2align 3 #endif -_GLOBAL(sys_call_table) +.globl sys_call_table +sys_call_table: + #include <asm/systbl.h> diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S index 03567c05950a..2a324f4cb1b9 100644 --- a/arch/powerpc/kernel/tm.S +++ b/arch/powerpc/kernel/tm.S @@ -10,6 +10,7 @@ #include <asm/ppc-opcode.h> #include <asm/ptrace.h> #include <asm/reg.h> +#include <asm/bug.h> #ifdef CONFIG_VSX /* See fpu.S, this is borrowed from there */ @@ -41,7 +42,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX); \ /* Stack frame offsets for local variables. */ #define TM_FRAME_L0 TM_FRAME_SIZE-16 #define TM_FRAME_L1 TM_FRAME_SIZE-8 -#define STACK_PARAM(x) (48+((x)*8)) /* In order to access the TM SPRs, TM must be enabled. So, do so: */ @@ -78,12 +78,6 @@ _GLOBAL(tm_abort) TABORT(R3) blr - .section ".toc","aw" -DSCR_DEFAULT: - .tc dscr_default[TC],dscr_default - - .section ".text" - /* void tm_reclaim(struct thread_struct *thread, * unsigned long orig_msr, * uint8_t cause) @@ -108,12 +102,12 @@ _GLOBAL(tm_reclaim) mflr r0 stw r6, 8(r1) std r0, 16(r1) - std r2, 40(r1) + std r2, STK_GOT(r1) stdu r1, -TM_FRAME_SIZE(r1) /* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD]. */ - std r3, STACK_PARAM(0)(r1) + std r3, STK_PARAM(R3)(r1) SAVE_NVGPRS(r1) /* We need to setup MSR for VSX register save instructions. Here we @@ -175,6 +169,13 @@ dont_backup_vec: stfd fr0,FPSTATE_FPSCR(r7) dont_backup_fp: + /* Do sanity check on MSR to make sure we are suspended */ + li r7, (MSR_TS_S)@higher + srdi r6, r14, 32 + and r6, r6, r7 +1: tdeqi r6, 0 + EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0 + /* The moment we treclaim, ALL of our GPRs will switch * to user register state. (FPRs, CCR etc. also!) * Use an sprg and a tm_scratch in the PACA to shuffle. @@ -202,7 +203,7 @@ dont_backup_fp: /* Now get some more GPRS free */ std r7, GPR7(r1) /* Temporary stash */ std r12, GPR12(r1) /* '' '' '' */ - ld r12, STACK_PARAM(0)(r1) /* Param 0, thread_struct * */ + ld r12, STK_PARAM(R3)(r1) /* Param 0, thread_struct * */ std r11, THREAD_TM_PPR(r12) /* Store PPR and free r11 */ @@ -289,11 +290,10 @@ dont_backup_fp: ld r0, 16(r1) mtcr r4 mtlr r0 - ld r2, 40(r1) + ld r2, STK_GOT(r1) - /* Load system default DSCR */ - ld r4, DSCR_DEFAULT@toc(r2) - ld r0, 0(r4) + /* Load CPU's default DSCR */ + ld r0, PACA_DSCR(r13) mtspr SPRN_DSCR, r0 blr @@ -312,7 +312,7 @@ _GLOBAL(__tm_recheckpoint) mflr r0 stw r5, 8(r1) std r0, 16(r1) - std r2, 40(r1) + std r2, STK_GOT(r1) stdu r1, -TM_FRAME_SIZE(r1) /* We've a struct pt_regs at [r1+STACK_FRAME_OVERHEAD]. @@ -320,8 +320,6 @@ _GLOBAL(__tm_recheckpoint) */ SAVE_NVGPRS(r1) - std r1, PACAR1(r13) - /* Load complete register state from ts_ckpt* registers */ addi r7, r3, PT_CKPT_REGS /* Thread's ckpt_regs */ @@ -385,12 +383,10 @@ restore_gprs: /* ******************** CR,LR,CCR,MSR ********** */ ld r4, _CTR(r7) ld r5, _LINK(r7) - ld r6, _CCR(r7) ld r8, _XER(r7) mtctr r4 mtlr r5 - mtcr r6 mtxer r8 /* ******************** TAR ******************** */ @@ -406,7 +402,8 @@ restore_gprs: li r4, 0 mtmsrd r4, 1 - REST_4GPRS(0, r7) /* GPR0-3 */ + REST_GPR(0, r7) /* GPR0 */ + REST_2GPRS(2, r7) /* GPR2-3 */ REST_GPR(4, r7) /* GPR4 */ REST_4GPRS(8, r7) /* GPR8-11 */ REST_2GPRS(12, r7) /* GPR12-13 */ @@ -418,6 +415,31 @@ restore_gprs: mtspr SPRN_DSCR, r5 mtspr SPRN_PPR, r6 + /* Do final sanity check on TEXASR to make sure FS is set. Do this + * here before we load up the userspace r1 so any bugs we hit will get + * a call chain */ + mfspr r5, SPRN_TEXASR + srdi r5, r5, 16 + li r6, (TEXASR_FS)@h + and r6, r6, r5 +1: tdeqi r6, 0 + EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0 + + /* Do final sanity check on MSR to make sure we are not transactional + * or suspended + */ + mfmsr r6 + li r5, (MSR_TS_MASK)@higher + srdi r6, r6, 32 + and r6, r6, r5 +1: tdnei r6, 0 + EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0 + + /* Restore CR */ + ld r6, _CCR(r7) + mtcr r6 + + REST_GPR(1, r7) /* GPR1 */ REST_GPR(5, r7) /* GPR5-7 */ REST_GPR(6, r7) ld r7, GPR7(r7) @@ -448,11 +470,10 @@ restore_gprs: ld r0, 16(r1) mtcr r4 mtlr r0 - ld r2, 40(r1) + ld r2, STK_GOT(r1) - /* Load system default DSCR */ - ld r4, DSCR_DEFAULT@toc(r2) - ld r0, 0(r4) + /* Load CPU's default DSCR */ + ld r0, PACA_DSCR(r13) mtspr SPRN_DSCR, r0 blr diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index aba05bbb3e74..7a12edbb61e7 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -1236,7 +1236,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm, int core; struct kvmppc_vcore *vcore; - core = id / threads_per_core; + core = id / threads_per_subcore; if (core >= KVM_MAX_VCORES) goto out; @@ -1286,7 +1286,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm, init_waitqueue_head(&vcore->wq); vcore->preempt_tb = TB_NIL; vcore->lpcr = kvm->arch.lpcr; - vcore->first_vcpuid = core * threads_per_core; + vcore->first_vcpuid = core * threads_per_subcore; vcore->kvm = kvm; } kvm->arch.vcores[core] = vcore; @@ -1476,16 +1476,19 @@ static void kvmppc_wait_for_nap(struct kvmppc_vcore *vc) static int on_primary_thread(void) { int cpu = smp_processor_id(); - int thr = cpu_thread_in_core(cpu); + int thr; - if (thr) + /* Are we on a primary subcore? */ + if (cpu_thread_in_subcore(cpu)) return 0; - while (++thr < threads_per_core) + + thr = 0; + while (++thr < threads_per_subcore) if (cpu_online(cpu + thr)) return 0; /* Grab all hw threads so they can't go into the kernel */ - for (thr = 1; thr < threads_per_core; ++thr) { + for (thr = 1; thr < threads_per_subcore; ++thr) { if (kvmppc_grab_hwthread(cpu + thr)) { /* Couldn't grab one; let the others go */ do { @@ -1544,15 +1547,18 @@ static void kvmppc_run_core(struct kvmppc_vcore *vc) } /* - * Make sure we are running on thread 0, and that - * secondary threads are offline. + * Make sure we are running on primary threads, and that secondary + * threads are offline. Also check if the number of threads in this + * guest are greater than the current system threads per guest. */ - if (threads_per_core > 1 && !on_primary_thread()) { + if ((threads_per_core > 1) && + ((vc->num_threads > threads_per_subcore) || !on_primary_thread())) { list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) vcpu->arch.ret = -EBUSY; goto out; } + vc->pcpu = smp_processor_id(); list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) { kvmppc_start_thread(vcpu); @@ -1580,7 +1586,7 @@ static void kvmppc_run_core(struct kvmppc_vcore *vc) /* wait for secondary threads to finish writing their state to memory */ if (vc->nap_count < vc->n_woken) kvmppc_wait_for_nap(vc); - for (i = 0; i < threads_per_core; ++i) + for (i = 0; i < threads_per_subcore; ++i) kvmppc_release_hwthread(vc->pcpu + i); /* prevent other vcpu threads from doing kvmppc_start_thread() now */ vc->vcore_state = VCORE_EXITING; @@ -2305,10 +2311,10 @@ static int kvmppc_core_init_vm_hv(struct kvm *kvm) spin_lock_init(&kvm->arch.slot_phys_lock); /* - * Don't allow secondary CPU threads to come online - * while any KVM VMs exist. + * Track that we now have a HV mode VM active. This blocks secondary + * CPU threads from coming online. */ - inhibit_secondary_onlining(); + kvm_hv_vm_activated(); return 0; } @@ -2324,7 +2330,7 @@ static void kvmppc_free_vcores(struct kvm *kvm) static void kvmppc_core_destroy_vm_hv(struct kvm *kvm) { - uninhibit_secondary_onlining(); + kvm_hv_vm_deactivated(); kvmppc_free_vcores(kvm); if (kvm->arch.rma) { diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c index 8cd0daebb82d..7cde8a665205 100644 --- a/arch/powerpc/kvm/book3s_hv_builtin.c +++ b/arch/powerpc/kvm/book3s_hv_builtin.c @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ +#include <linux/cpu.h> #include <linux/kvm_host.h> #include <linux/preempt.h> #include <linux/export.h> @@ -181,3 +182,33 @@ void __init kvm_cma_reserve(void) kvm_cma_declare_contiguous(selected_size, align_size); } } + +/* + * When running HV mode KVM we need to block certain operations while KVM VMs + * exist in the system. We use a counter of VMs to track this. + * + * One of the operations we need to block is onlining of secondaries, so we + * protect hv_vm_count with get/put_online_cpus(). + */ +static atomic_t hv_vm_count; + +void kvm_hv_vm_activated(void) +{ + get_online_cpus(); + atomic_inc(&hv_vm_count); + put_online_cpus(); +} +EXPORT_SYMBOL_GPL(kvm_hv_vm_activated); + +void kvm_hv_vm_deactivated(void) +{ + get_online_cpus(); + atomic_dec(&hv_vm_count); + put_online_cpus(); +} +EXPORT_SYMBOL_GPL(kvm_hv_vm_deactivated); + +bool kvm_hv_mode_active(void) +{ + return atomic_read(&hv_vm_count) != 0; +} diff --git a/arch/powerpc/kvm/book3s_hv_interrupts.S b/arch/powerpc/kvm/book3s_hv_interrupts.S index e18e3cfc32de..8c86422a1e37 100644 --- a/arch/powerpc/kvm/book3s_hv_interrupts.S +++ b/arch/powerpc/kvm/book3s_hv_interrupts.S @@ -171,7 +171,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201) #endif /* CONFIG_SMP */ /* Jump to partition switch code */ - bl .kvmppc_hv_entry_trampoline + bl kvmppc_hv_entry_trampoline nop /* diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 974793435a2e..77356fd25ccc 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -292,8 +292,7 @@ kvm_start_guest: beq kvm_no_guest /* Set HSTATE_DSCR(r13) to something sensible */ - LOAD_REG_ADDR(r6, dscr_default) - ld r6, 0(r6) + ld r6, PACA_DSCR(r13) std r6, HSTATE_DSCR(r13) bl kvmppc_hv_entry @@ -1799,7 +1798,7 @@ kvmppc_hdsi: /* Search the hash table. */ mr r3, r9 /* vcpu pointer */ li r7, 1 /* data fault */ - bl .kvmppc_hpte_hv_fault + bl kvmppc_hpte_hv_fault ld r9, HSTATE_KVM_VCPU(r13) ld r10, VCPU_PC(r9) ld r11, VCPU_MSR(r9) @@ -1873,7 +1872,7 @@ kvmppc_hisi: mr r4, r10 mr r6, r11 li r7, 0 /* instruction fault */ - bl .kvmppc_hpte_hv_fault + bl kvmppc_hpte_hv_fault ld r9, HSTATE_KVM_VCPU(r13) ld r10, VCPU_PC(r9) ld r11, VCPU_MSR(r9) @@ -1947,16 +1946,16 @@ hcall_real_fallback: .globl hcall_real_table hcall_real_table: .long 0 /* 0 - unused */ - .long .kvmppc_h_remove - hcall_real_table - .long .kvmppc_h_enter - hcall_real_table - .long .kvmppc_h_read - hcall_real_table + .long DOTSYM(kvmppc_h_remove) - hcall_real_table + .long DOTSYM(kvmppc_h_enter) - hcall_real_table + .long DOTSYM(kvmppc_h_read) - hcall_real_table .long 0 /* 0x10 - H_CLEAR_MOD */ .long 0 /* 0x14 - H_CLEAR_REF */ - .long .kvmppc_h_protect - hcall_real_table - .long .kvmppc_h_get_tce - hcall_real_table - .long .kvmppc_h_put_tce - hcall_real_table + .long DOTSYM(kvmppc_h_protect) - hcall_real_table + .long DOTSYM(kvmppc_h_get_tce) - hcall_real_table + .long DOTSYM(kvmppc_h_put_tce) - hcall_real_table .long 0 /* 0x24 - H_SET_SPRG0 */ - .long .kvmppc_h_set_dabr - hcall_real_table + .long DOTSYM(kvmppc_h_set_dabr) - hcall_real_table .long 0 /* 0x2c */ .long 0 /* 0x30 */ .long 0 /* 0x34 */ @@ -1972,11 +1971,11 @@ hcall_real_table: .long 0 /* 0x5c */ .long 0 /* 0x60 */ #ifdef CONFIG_KVM_XICS - .long .kvmppc_rm_h_eoi - hcall_real_table - .long .kvmppc_rm_h_cppr - hcall_real_table - .long .kvmppc_rm_h_ipi - hcall_real_table + .long DOTSYM(kvmppc_rm_h_eoi) - hcall_real_table + .long DOTSYM(kvmppc_rm_h_cppr) - hcall_real_table + .long DOTSYM(kvmppc_rm_h_ipi) - hcall_real_table .long 0 /* 0x70 - H_IPOLL */ - .long .kvmppc_rm_h_xirr - hcall_real_table + .long DOTSYM(kvmppc_rm_h_xirr) - hcall_real_table #else .long 0 /* 0x64 - H_EOI */ .long 0 /* 0x68 - H_CPPR */ @@ -2010,7 +2009,7 @@ hcall_real_table: .long 0 /* 0xd4 */ .long 0 /* 0xd8 */ .long 0 /* 0xdc */ - .long .kvmppc_h_cede - hcall_real_table + .long DOTSYM(kvmppc_h_cede) - hcall_real_table .long 0 /* 0xe4 */ .long 0 /* 0xe8 */ .long 0 /* 0xec */ @@ -2027,11 +2026,11 @@ hcall_real_table: .long 0 /* 0x118 */ .long 0 /* 0x11c */ .long 0 /* 0x120 */ - .long .kvmppc_h_bulk_remove - hcall_real_table + .long DOTSYM(kvmppc_h_bulk_remove) - hcall_real_table .long 0 /* 0x128 */ .long 0 /* 0x12c */ .long 0 /* 0x130 */ - .long .kvmppc_h_set_xdabr - hcall_real_table + .long DOTSYM(kvmppc_h_set_xdabr) - hcall_real_table hcall_real_table_end: ignore_hdec: @@ -2256,7 +2255,7 @@ kvm_cede_exit: /* Try to handle a machine check in real mode */ machine_check_realmode: mr r3, r9 /* get vcpu pointer */ - bl .kvmppc_realmode_machine_check + bl kvmppc_realmode_machine_check nop cmpdi r3, 0 /* continue exiting from guest? */ ld r9, HSTATE_KVM_VCPU(r13) diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index bab20f410443..61c738ab1283 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -426,7 +426,7 @@ int kvm_dev_ioctl_check_extension(long ext) #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE case KVM_CAP_PPC_SMT: if (hv_enabled) - r = threads_per_core; + r = threads_per_subcore; else r = 0; break; diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 95a20e17dbff..59fa2de9546d 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -23,9 +23,7 @@ obj-y += checksum_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_PPC64) += checksum_wrappers_64.o endif -ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),) obj-$(CONFIG_PPC64) += memcpy_power7.o memcpy_64.o -endif obj-$(CONFIG_PPC_EMULATE_SSTEP) += sstep.o ldstfp.o diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S index 9f9434a85264..a3c4dc4defdd 100644 --- a/arch/powerpc/lib/copypage_64.S +++ b/arch/powerpc/lib/copypage_64.S @@ -16,11 +16,11 @@ PPC64_CACHES: .tc ppc64_caches[TC],ppc64_caches .section ".text" -_GLOBAL(copy_page) +_GLOBAL_TOC(copy_page) BEGIN_FTR_SECTION lis r5,PAGE_SIZE@h FTR_SECTION_ELSE - b .copypage_power7 + b copypage_power7 ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY) ori r5,r5,PAGE_SIZE@l BEGIN_FTR_SECTION diff --git a/arch/powerpc/lib/copypage_power7.S b/arch/powerpc/lib/copypage_power7.S index 395c594722a2..d7dafb3777ac 100644 --- a/arch/powerpc/lib/copypage_power7.S +++ b/arch/powerpc/lib/copypage_power7.S @@ -56,15 +56,15 @@ _GLOBAL(copypage_power7) #ifdef CONFIG_ALTIVEC mflr r0 - std r3,48(r1) - std r4,56(r1) + std r3,-STACKFRAMESIZE+STK_REG(R31)(r1) + std r4,-STACKFRAMESIZE+STK_REG(R30)(r1) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) - bl .enter_vmx_copy + bl enter_vmx_copy cmpwi r3,0 ld r0,STACKFRAMESIZE+16(r1) - ld r3,STACKFRAMESIZE+48(r1) - ld r4,STACKFRAMESIZE+56(r1) + ld r3,STK_REG(R31)(r1) + ld r4,STK_REG(R30)(r1) mtlr r0 li r0,(PAGE_SIZE/128) @@ -103,7 +103,7 @@ _GLOBAL(copypage_power7) addi r3,r3,128 bdnz 1b - b .exit_vmx_copy /* tail call optimise */ + b exit_vmx_copy /* tail call optimise */ #else li r0,(PAGE_SIZE/128) diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S index 596a285c0755..0860ee46013c 100644 --- a/arch/powerpc/lib/copyuser_64.S +++ b/arch/powerpc/lib/copyuser_64.S @@ -18,7 +18,7 @@ #endif .align 7 -_GLOBAL(__copy_tofrom_user) +_GLOBAL_TOC(__copy_tofrom_user) BEGIN_FTR_SECTION nop FTR_SECTION_ELSE diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index e8e9c36dc784..c46c876ac96a 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -66,7 +66,7 @@ ld r15,STK_REG(R15)(r1) ld r14,STK_REG(R14)(r1) .Ldo_err3: - bl .exit_vmx_usercopy + bl exit_vmx_usercopy ld r0,STACKFRAMESIZE+16(r1) mtlr r0 b .Lexit @@ -85,9 +85,9 @@ .Lexit: addi r1,r1,STACKFRAMESIZE .Ldo_err1: - ld r3,48(r1) - ld r4,56(r1) - ld r5,64(r1) + ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) + ld r4,-STACKFRAMESIZE+STK_REG(R30)(r1) + ld r5,-STACKFRAMESIZE+STK_REG(R29)(r1) b __copy_tofrom_user_base @@ -96,18 +96,18 @@ _GLOBAL(__copy_tofrom_user_power7) cmpldi r5,16 cmpldi cr1,r5,4096 - std r3,48(r1) - std r4,56(r1) - std r5,64(r1) + std r3,-STACKFRAMESIZE+STK_REG(R31)(r1) + std r4,-STACKFRAMESIZE+STK_REG(R30)(r1) + std r5,-STACKFRAMESIZE+STK_REG(R29)(r1) blt .Lshort_copy bgt cr1,.Lvmx_copy #else cmpldi r5,16 - std r3,48(r1) - std r4,56(r1) - std r5,64(r1) + std r3,-STACKFRAMESIZE+STK_REG(R31)(r1) + std r4,-STACKFRAMESIZE+STK_REG(R30)(r1) + std r5,-STACKFRAMESIZE+STK_REG(R29)(r1) blt .Lshort_copy #endif @@ -295,12 +295,12 @@ err1; stb r0,0(r3) mflr r0 std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) - bl .enter_vmx_usercopy + bl enter_vmx_usercopy cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) - ld r3,STACKFRAMESIZE+48(r1) - ld r4,STACKFRAMESIZE+56(r1) - ld r5,STACKFRAMESIZE+64(r1) + ld r3,STK_REG(R31)(r1) + ld r4,STK_REG(R30)(r1) + ld r5,STK_REG(R29)(r1) mtlr r0 /* @@ -514,7 +514,7 @@ err3; lbz r0,0(r4) err3; stb r0,0(r3) 15: addi r1,r1,STACKFRAMESIZE - b .exit_vmx_usercopy /* tail call optimise */ + b exit_vmx_usercopy /* tail call optimise */ .Lvmx_unaligned_copy: /* Get the destination 16B aligned */ @@ -717,5 +717,5 @@ err3; lbz r0,0(r4) err3; stb r0,0(r3) 15: addi r1,r1,STACKFRAMESIZE - b .exit_vmx_usercopy /* tail call optimise */ + b exit_vmx_usercopy /* tail call optimise */ #endif /* CONFiG_ALTIVEC */ diff --git a/arch/powerpc/lib/hweight_64.S b/arch/powerpc/lib/hweight_64.S index 9b96ff2ecd4d..19e66001a4f9 100644 --- a/arch/powerpc/lib/hweight_64.S +++ b/arch/powerpc/lib/hweight_64.S @@ -24,7 +24,7 @@ _GLOBAL(__arch_hweight8) BEGIN_FTR_SECTION - b .__sw_hweight8 + b __sw_hweight8 nop nop FTR_SECTION_ELSE @@ -35,7 +35,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB) _GLOBAL(__arch_hweight16) BEGIN_FTR_SECTION - b .__sw_hweight16 + b __sw_hweight16 nop nop nop @@ -57,7 +57,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB) _GLOBAL(__arch_hweight32) BEGIN_FTR_SECTION - b .__sw_hweight32 + b __sw_hweight32 nop nop nop @@ -82,7 +82,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_POPCNTB) _GLOBAL(__arch_hweight64) BEGIN_FTR_SECTION - b .__sw_hweight64 + b __sw_hweight64 nop nop nop diff --git a/arch/powerpc/lib/mem_64.S b/arch/powerpc/lib/mem_64.S index f4fcb0bc6563..0738f96befbf 100644 --- a/arch/powerpc/lib/mem_64.S +++ b/arch/powerpc/lib/mem_64.S @@ -79,8 +79,8 @@ _GLOBAL(memset) _GLOBAL(memmove) cmplw 0,r3,r4 - bgt .backwards_memcpy - b .memcpy + bgt backwards_memcpy + b memcpy _GLOBAL(backwards_memcpy) rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */ diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S index 72ad055168a3..32a06ec395d2 100644 --- a/arch/powerpc/lib/memcpy_64.S +++ b/arch/powerpc/lib/memcpy_64.S @@ -10,14 +10,29 @@ #include <asm/ppc_asm.h> .align 7 -_GLOBAL(memcpy) +_GLOBAL_TOC(memcpy) BEGIN_FTR_SECTION - std r3,48(r1) /* save destination pointer for return value */ +#ifdef __LITTLE_ENDIAN__ + cmpdi cr7,r5,0 +#else + std r3,-STACKFRAMESIZE+STK_REG(R31)(r1) /* save destination pointer for return value */ +#endif FTR_SECTION_ELSE #ifndef SELFTEST b memcpy_power7 #endif ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY) +#ifdef __LITTLE_ENDIAN__ + /* dumb little-endian memcpy that will get replaced at runtime */ + addi r9,r3,-1 + addi r4,r4,-1 + beqlr cr7 + mtctr r5 +1: lbzu r10,1(r4) + stbu r10,1(r9) + bdnz 1b + blr +#else PPC_MTOCRF(0x01,r5) cmpldi cr1,r5,16 neg r6,r3 # LS 3 bits = # bytes to 8-byte dest bdry @@ -73,7 +88,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 2: bf cr7*4+3,3f lbz r9,8(r4) stb r9,0(r3) -3: ld r3,48(r1) /* return dest pointer */ +3: ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) /* return dest pointer */ blr .Lsrc_unaligned: @@ -156,7 +171,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 2: bf cr7*4+3,3f rotldi r9,r9,8 stb r9,0(r3) -3: ld r3,48(r1) /* return dest pointer */ +3: ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) /* return dest pointer */ blr .Ldst_unaligned: @@ -201,5 +216,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 3: bf cr7*4+3,4f lbz r0,0(r4) stb r0,0(r3) -4: ld r3,48(r1) /* return dest pointer */ +4: ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) /* return dest pointer */ blr +#endif diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S index e4177dbea6bd..2ff5c142f87b 100644 --- a/arch/powerpc/lib/memcpy_power7.S +++ b/arch/powerpc/lib/memcpy_power7.S @@ -33,14 +33,14 @@ _GLOBAL(memcpy_power7) cmpldi r5,16 cmpldi cr1,r5,4096 - std r3,48(r1) + std r3,-STACKFRAMESIZE+STK_REG(R31)(r1) blt .Lshort_copy bgt cr1,.Lvmx_copy #else cmpldi r5,16 - std r3,48(r1) + std r3,-STACKFRAMESIZE+STK_REG(R31)(r1) blt .Lshort_copy #endif @@ -216,7 +216,7 @@ _GLOBAL(memcpy_power7) lbz r0,0(r4) stb r0,0(r3) -15: ld r3,48(r1) +15: ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) blr .Lunwind_stack_nonvmx_copy: @@ -226,16 +226,16 @@ _GLOBAL(memcpy_power7) #ifdef CONFIG_ALTIVEC .Lvmx_copy: mflr r0 - std r4,56(r1) - std r5,64(r1) + std r4,-STACKFRAMESIZE+STK_REG(R30)(r1) + std r5,-STACKFRAMESIZE+STK_REG(R29)(r1) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) - bl .enter_vmx_copy + bl enter_vmx_copy cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) - ld r3,STACKFRAMESIZE+48(r1) - ld r4,STACKFRAMESIZE+56(r1) - ld r5,STACKFRAMESIZE+64(r1) + ld r3,STK_REG(R31)(r1) + ld r4,STK_REG(R30)(r1) + ld r5,STK_REG(R29)(r1) mtlr r0 /* @@ -447,8 +447,8 @@ _GLOBAL(memcpy_power7) stb r0,0(r3) 15: addi r1,r1,STACKFRAMESIZE - ld r3,48(r1) - b .exit_vmx_copy /* tail call optimise */ + ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) + b exit_vmx_copy /* tail call optimise */ .Lvmx_unaligned_copy: /* Get the destination 16B aligned */ @@ -651,6 +651,6 @@ _GLOBAL(memcpy_power7) stb r0,0(r3) 15: addi r1,r1,STACKFRAMESIZE - ld r3,48(r1) - b .exit_vmx_copy /* tail call optimise */ + ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) + b exit_vmx_copy /* tail call optimise */ #endif /* CONFiG_ALTIVEC */ diff --git a/arch/powerpc/lib/string_64.S b/arch/powerpc/lib/string_64.S index 3b1e48049faf..7bd9549a90a2 100644 --- a/arch/powerpc/lib/string_64.S +++ b/arch/powerpc/lib/string_64.S @@ -77,7 +77,7 @@ err3; stb r0,0(r3) mr r3,r4 blr -_GLOBAL(__clear_user) +_GLOBAL_TOC(__clear_user) cmpdi r4,32 neg r6,r3 li r0,0 diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index 1136d26a95ae..057cbbb4c576 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -159,7 +159,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) BEGIN_FTR_SECTION mr r4,r30 mr r5,r7 - bl .hash_page_do_lazy_icache + bl hash_page_do_lazy_icache END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE) /* At this point, r3 contains new PP bits, save them in @@ -201,7 +201,8 @@ htab_insert_pte: li r8,MMU_PAGE_4K /* page size */ li r9,MMU_PAGE_4K /* actual page size */ ld r10,STK_PARAM(R9)(r1) /* segment size */ -_GLOBAL(htab_call_hpte_insert1) +.globl htab_call_hpte_insert1 +htab_call_hpte_insert1: bl . /* Patched by htab_finish_init() */ cmpdi 0,r3,0 bge htab_pte_insert_ok /* Insertion successful */ @@ -225,7 +226,8 @@ _GLOBAL(htab_call_hpte_insert1) li r8,MMU_PAGE_4K /* page size */ li r9,MMU_PAGE_4K /* actual page size */ ld r10,STK_PARAM(R9)(r1) /* segment size */ -_GLOBAL(htab_call_hpte_insert2) +.globl htab_call_hpte_insert2 +htab_call_hpte_insert2: bl . /* Patched by htab_finish_init() */ cmpdi 0,r3,0 bge+ htab_pte_insert_ok /* Insertion successful */ @@ -242,7 +244,8 @@ _GLOBAL(htab_call_hpte_insert2) 2: and r0,r5,r27 rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */ /* Call ppc_md.hpte_remove */ -_GLOBAL(htab_call_hpte_remove) +.globl htab_call_hpte_remove +htab_call_hpte_remove: bl . /* Patched by htab_finish_init() */ /* Try all again */ @@ -296,7 +299,8 @@ htab_modify_pte: li r7,MMU_PAGE_4K /* actual page size */ ld r8,STK_PARAM(R9)(r1) /* segment size */ ld r9,STK_PARAM(R8)(r1) /* get "local" param */ -_GLOBAL(htab_call_hpte_updatepp) +.globl htab_call_hpte_updatepp +htab_call_hpte_updatepp: bl . /* Patched by htab_finish_init() */ /* if we failed because typically the HPTE wasn't really here @@ -471,7 +475,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) BEGIN_FTR_SECTION mr r4,r30 mr r5,r7 - bl .hash_page_do_lazy_icache + bl hash_page_do_lazy_icache END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE) /* At this point, r3 contains new PP bits, save them in @@ -526,7 +530,8 @@ htab_special_pfn: li r8,MMU_PAGE_4K /* page size */ li r9,MMU_PAGE_4K /* actual page size */ ld r10,STK_PARAM(R9)(r1) /* segment size */ -_GLOBAL(htab_call_hpte_insert1) +.globl htab_call_hpte_insert1 +htab_call_hpte_insert1: bl . /* patched by htab_finish_init() */ cmpdi 0,r3,0 bge htab_pte_insert_ok /* Insertion successful */ @@ -554,7 +559,8 @@ _GLOBAL(htab_call_hpte_insert1) li r8,MMU_PAGE_4K /* page size */ li r9,MMU_PAGE_4K /* actual page size */ ld r10,STK_PARAM(R9)(r1) /* segment size */ -_GLOBAL(htab_call_hpte_insert2) +.globl htab_call_hpte_insert2 +htab_call_hpte_insert2: bl . /* patched by htab_finish_init() */ cmpdi 0,r3,0 bge+ htab_pte_insert_ok /* Insertion successful */ @@ -571,7 +577,8 @@ _GLOBAL(htab_call_hpte_insert2) 2: and r0,r5,r27 rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */ /* Call ppc_md.hpte_remove */ -_GLOBAL(htab_call_hpte_remove) +.globl htab_call_hpte_remove +htab_call_hpte_remove: bl . /* patched by htab_finish_init() */ /* Try all again */ @@ -588,7 +595,7 @@ htab_inval_old_hpte: li r6,MMU_PAGE_64K /* psize */ ld r7,STK_PARAM(R9)(r1) /* ssize */ ld r8,STK_PARAM(R8)(r1) /* local */ - bl .flush_hash_page + bl flush_hash_page /* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */ lis r0,_PAGE_HPTE_SUB@h ori r0,r0,_PAGE_HPTE_SUB@l @@ -660,7 +667,8 @@ htab_modify_pte: li r7,MMU_PAGE_4K /* actual page size */ ld r8,STK_PARAM(R9)(r1) /* segment size */ ld r9,STK_PARAM(R8)(r1) /* get "local" param */ -_GLOBAL(htab_call_hpte_updatepp) +.globl htab_call_hpte_updatepp +htab_call_hpte_updatepp: bl . /* patched by htab_finish_init() */ /* if we failed because typically the HPTE wasn't really here @@ -812,7 +820,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) BEGIN_FTR_SECTION mr r4,r30 mr r5,r7 - bl .hash_page_do_lazy_icache + bl hash_page_do_lazy_icache END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE) /* At this point, r3 contains new PP bits, save them in @@ -857,7 +865,8 @@ ht64_insert_pte: li r8,MMU_PAGE_64K li r9,MMU_PAGE_64K /* actual page size */ ld r10,STK_PARAM(R9)(r1) /* segment size */ -_GLOBAL(ht64_call_hpte_insert1) +.globl ht64_call_hpte_insert1 +ht64_call_hpte_insert1: bl . /* patched by htab_finish_init() */ cmpdi 0,r3,0 bge ht64_pte_insert_ok /* Insertion successful */ @@ -881,7 +890,8 @@ _GLOBAL(ht64_call_hpte_insert1) li r8,MMU_PAGE_64K li r9,MMU_PAGE_64K /* actual page size */ ld r10,STK_PARAM(R9)(r1) /* segment size */ -_GLOBAL(ht64_call_hpte_insert2) +.globl ht64_call_hpte_insert2 +ht64_call_hpte_insert2: bl . /* patched by htab_finish_init() */ cmpdi 0,r3,0 bge+ ht64_pte_insert_ok /* Insertion successful */ @@ -898,7 +908,8 @@ _GLOBAL(ht64_call_hpte_insert2) 2: and r0,r5,r27 rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */ /* Call ppc_md.hpte_remove */ -_GLOBAL(ht64_call_hpte_remove) +.globl ht64_call_hpte_remove +ht64_call_hpte_remove: bl . /* patched by htab_finish_init() */ /* Try all again */ @@ -952,7 +963,8 @@ ht64_modify_pte: li r7,MMU_PAGE_64K /* actual page size */ ld r8,STK_PARAM(R9)(r1) /* segment size */ ld r9,STK_PARAM(R8)(r1) /* get "local" param */ -_GLOBAL(ht64_call_hpte_updatepp) +.globl ht64_call_hpte_updatepp +ht64_call_hpte_updatepp: bl . /* patched by htab_finish_init() */ /* if we failed because typically the HPTE wasn't really here diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 350aa58a6f95..88fdd9d25077 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -449,6 +449,24 @@ static void mmu_psize_set_default_penc(void) mmu_psize_defs[bpsize].penc[apsize] = -1; } +#ifdef CONFIG_PPC_64K_PAGES + +static bool might_have_hea(void) +{ + /* + * The HEA ethernet adapter requires awareness of the + * GX bus. Without that awareness we can easily assume + * we will never see an HEA ethernet device. + */ +#ifdef CONFIG_IBMEBUS + return !cpu_has_feature(CPU_FTR_ARCH_207S); +#else + return false; +#endif +} + +#endif /* #ifdef CONFIG_PPC_64K_PAGES */ + static void __init htab_init_page_sizes(void) { int rc; @@ -503,10 +521,11 @@ static void __init htab_init_page_sizes(void) mmu_linear_psize = MMU_PAGE_64K; if (mmu_has_feature(MMU_FTR_CI_LARGE_PAGE)) { /* - * Don't use 64k pages for ioremap on pSeries, since - * that would stop us accessing the HEA ethernet. + * When running on pSeries using 64k pages for ioremap + * would stop us accessing the HEA ethernet. So if we + * have the chance of ever seeing one, stay at 4k. */ - if (!machine_is(pseries)) + if (!might_have_hea() || !machine_is(pseries)) mmu_io_psize = MMU_PAGE_64K; } else mmu_ci_restrictions = 1; @@ -607,47 +626,43 @@ int remove_section_mapping(unsigned long start, unsigned long end) } #endif /* CONFIG_MEMORY_HOTPLUG */ -#define FUNCTION_TEXT(A) ((*(unsigned long *)(A))) +extern u32 htab_call_hpte_insert1[]; +extern u32 htab_call_hpte_insert2[]; +extern u32 htab_call_hpte_remove[]; +extern u32 htab_call_hpte_updatepp[]; +extern u32 ht64_call_hpte_insert1[]; +extern u32 ht64_call_hpte_insert2[]; +extern u32 ht64_call_hpte_remove[]; +extern u32 ht64_call_hpte_updatepp[]; static void __init htab_finish_init(void) { - extern unsigned int *htab_call_hpte_insert1; - extern unsigned int *htab_call_hpte_insert2; - extern unsigned int *htab_call_hpte_remove; - extern unsigned int *htab_call_hpte_updatepp; - #ifdef CONFIG_PPC_HAS_HASH_64K - extern unsigned int *ht64_call_hpte_insert1; - extern unsigned int *ht64_call_hpte_insert2; - extern unsigned int *ht64_call_hpte_remove; - extern unsigned int *ht64_call_hpte_updatepp; - patch_branch(ht64_call_hpte_insert1, - FUNCTION_TEXT(ppc_md.hpte_insert), + ppc_function_entry(ppc_md.hpte_insert), BRANCH_SET_LINK); patch_branch(ht64_call_hpte_insert2, - FUNCTION_TEXT(ppc_md.hpte_insert), + ppc_function_entry(ppc_md.hpte_insert), BRANCH_SET_LINK); patch_branch(ht64_call_hpte_remove, - FUNCTION_TEXT(ppc_md.hpte_remove), + ppc_function_entry(ppc_md.hpte_remove), BRANCH_SET_LINK); patch_branch(ht64_call_hpte_updatepp, - FUNCTION_TEXT(ppc_md.hpte_updatepp), + ppc_function_entry(ppc_md.hpte_updatepp), BRANCH_SET_LINK); - #endif /* CONFIG_PPC_HAS_HASH_64K */ patch_branch(htab_call_hpte_insert1, - FUNCTION_TEXT(ppc_md.hpte_insert), + ppc_function_entry(ppc_md.hpte_insert), BRANCH_SET_LINK); patch_branch(htab_call_hpte_insert2, - FUNCTION_TEXT(ppc_md.hpte_insert), + ppc_function_entry(ppc_md.hpte_insert), BRANCH_SET_LINK); patch_branch(htab_call_hpte_remove, - FUNCTION_TEXT(ppc_md.hpte_remove), + ppc_function_entry(ppc_md.hpte_remove), BRANCH_SET_LINK); patch_branch(htab_call_hpte_updatepp, - FUNCTION_TEXT(ppc_md.hpte_updatepp), + ppc_function_entry(ppc_md.hpte_updatepp), BRANCH_SET_LINK); } @@ -964,6 +979,22 @@ void hash_failure_debug(unsigned long ea, unsigned long access, trap, vsid, ssize, psize, lpsize, pte); } +static void check_paca_psize(unsigned long ea, struct mm_struct *mm, + int psize, bool user_region) +{ + if (user_region) { + if (psize != get_paca_psize(ea)) { + get_paca()->context = mm->context; + slb_flush_and_rebolt(); + } + } else if (get_paca()->vmalloc_sllp != + mmu_psize_defs[mmu_vmalloc_psize].sllp) { + get_paca()->vmalloc_sllp = + mmu_psize_defs[mmu_vmalloc_psize].sllp; + slb_vmalloc_update(); + } +} + /* Result code is: * 0 - handled * 1 - normal page fault @@ -1085,6 +1116,8 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) WARN_ON(1); } #endif + check_paca_psize(ea, mm, psize, user_region); + goto bail; } @@ -1125,17 +1158,8 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) #endif } } - if (user_region) { - if (psize != get_paca_psize(ea)) { - get_paca()->context = mm->context; - slb_flush_and_rebolt(); - } - } else if (get_paca()->vmalloc_sllp != - mmu_psize_defs[mmu_vmalloc_psize].sllp) { - get_paca()->vmalloc_sllp = - mmu_psize_defs[mmu_vmalloc_psize].sllp; - slb_vmalloc_update(); - } + + check_paca_psize(ea, mm, psize, user_region); #endif /* CONFIG_PPC_64K_PAGES */ #ifdef CONFIG_PPC_HAS_HASH_64K diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 964a5f61488a..0399a6702958 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -256,10 +256,14 @@ static inline void patch_slb_encoding(unsigned int *insn_addr, patch_instruction(insn_addr, insn); } +extern u32 slb_compare_rr_to_size[]; +extern u32 slb_miss_kernel_load_linear[]; +extern u32 slb_miss_kernel_load_io[]; +extern u32 slb_compare_rr_to_size[]; +extern u32 slb_miss_kernel_load_vmemmap[]; + void slb_set_size(u16 size) { - extern unsigned int *slb_compare_rr_to_size; - if (mmu_slb_size == size) return; @@ -272,11 +276,7 @@ void slb_initialize(void) unsigned long linear_llp, vmalloc_llp, io_llp; unsigned long lflags, vflags; static int slb_encoding_inited; - extern unsigned int *slb_miss_kernel_load_linear; - extern unsigned int *slb_miss_kernel_load_io; - extern unsigned int *slb_compare_rr_to_size; #ifdef CONFIG_SPARSEMEM_VMEMMAP - extern unsigned int *slb_miss_kernel_load_vmemmap; unsigned long vmemmap_llp; #endif diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index 17aa6dfceb34..736d18b3cefd 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -35,7 +35,7 @@ _GLOBAL(slb_allocate_realmode) * check for bad kernel/user address * (ea & ~REGION_MASK) >= PGTABLE_RANGE */ - rldicr. r9,r3,4,(63 - 46 - 4) + rldicr. r9,r3,4,(63 - PGTABLE_EADDR_SIZE - 4) bne- 8f srdi r9,r3,60 /* get region */ @@ -59,7 +59,8 @@ _GLOBAL(slb_allocate_realmode) /* Linear mapping encoding bits, the "li" instruction below will * be patched by the kernel at boot */ -_GLOBAL(slb_miss_kernel_load_linear) +.globl slb_miss_kernel_load_linear +slb_miss_kernel_load_linear: li r11,0 /* * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1 @@ -79,7 +80,8 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT) /* Check virtual memmap region. To be patches at kernel boot */ cmpldi cr0,r9,0xf bne 1f -_GLOBAL(slb_miss_kernel_load_vmemmap) +.globl slb_miss_kernel_load_vmemmap +slb_miss_kernel_load_vmemmap: li r11,0 b 6f 1: @@ -95,7 +97,8 @@ _GLOBAL(slb_miss_kernel_load_vmemmap) b 6f 5: /* IO mapping */ - _GLOBAL(slb_miss_kernel_load_io) +.globl slb_miss_kernel_load_io +slb_miss_kernel_load_io: li r11,0 6: /* @@ -250,7 +253,8 @@ slb_finish_load: 7: ld r10,PACASTABRR(r13) addi r10,r10,1 /* This gets soft patched on boot. */ -_GLOBAL(slb_compare_rr_to_size) +.globl slb_compare_rr_to_size +slb_compare_rr_to_size: cmpldi r10,0 blt+ 4f diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index ae3d5b799b90..92cb18d52ea8 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -596,8 +596,13 @@ static void __early_init_mmu(int boot_cpu) /* XXX This should be decided at runtime based on supported * page sizes in the TLB, but for now let's assume 16M is * always there and a good fit (which it probably is) + * + * Freescale booke only supports 4K pages in TLB0, so use that. */ - mmu_vmemmap_psize = MMU_PAGE_16M; + if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) + mmu_vmemmap_psize = MMU_PAGE_4K; + else + mmu_vmemmap_psize = MMU_PAGE_16M; /* XXX This code only checks for TLB 0 capabilities and doesn't * check what page size combos are supported by the HW. It diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index dc1a264ec6e6..4d88f6a19058 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -199,6 +199,34 @@ config CURRITUCK help This option enables support for the IBM Currituck (476fpe) evaluation board +config AKEBONO + bool "IBM Akebono (476gtr) Support" + depends on PPC_47x + default n + select SWIOTLB + select 476FPE + select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_HSTA_MSI + select I2C + select I2C_IBM_IIC + select NETDEVICES + select ETHERNET + select NET_VENDOR_IBM + select IBM_EMAC_EMAC4 + select IBM_EMAC_RGMII_WOL + select USB + select USB_OHCI_HCD_PLATFORM + select USB_EHCI_HCD_PLATFORM + select MMC_SDHCI + select MMC_SDHCI_PLTFM + select MMC_SDHCI_OF_476GTR + select ATA + select SATA_AHCI_PLATFORM + help + This option enables support for the IBM Akebono (476gtr) evaluation board + + config ICON bool "Icon" depends on 44x @@ -323,6 +351,20 @@ config APM821xx select IBM_EMAC_EMAC4 select IBM_EMAC_TAH +config 476FPE_ERR46 + depends on 476FPE + bool "Enable linker work around for PPC476FPE errata #46" + help + This option enables a work around for an icache bug on 476 + that can cause execution of stale instructions when falling + through pages (IBM errata #46). It requires a recent version + of binutils which supports the --ppc476-workaround option. + + The work around enables the appropriate linker options and + ensures that all module output sections are aligned to 4K + page boundaries. The work around is only required when + building modules. + # 44x errata/workaround config symbols, selected by the CPU models above config IBM440EP_ERR42 bool diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index d03833abec09..26d35b5941f7 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -10,4 +10,5 @@ obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o obj-$(CONFIG_ISS4xx) += iss4xx.o obj-$(CONFIG_CANYONLANDS)+= canyonlands.o -obj-$(CONFIG_CURRITUCK) += currituck.o +obj-$(CONFIG_CURRITUCK) += ppc476.o +obj-$(CONFIG_AKEBONO) += ppc476.o diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/ppc476.c index 7f1b71a01c6a..33986c1a05da 100644 --- a/arch/powerpc/platforms/44x/currituck.c +++ b/arch/powerpc/platforms/44x/ppc476.c @@ -1,7 +1,8 @@ /* - * Currituck board specific routines + * PowerPC 476FPE board specific routines * - * Copyright © 2011 Tony Breeds IBM Corporation + * Copyright © 2013 Tony Breeds IBM Corporation + * Copyright © 2013 Alistair Popple IBM Corporation * * Based on earlier code: * Matt Porter <mporter@kernel.crashing.org> @@ -35,8 +36,9 @@ #include <asm/mmu.h> #include <linux/pci.h> +#include <linux/i2c.h> -static __initdata struct of_device_id ppc47x_of_bus[] = { +static struct of_device_id ppc47x_of_bus[] __initdata = { { .compatible = "ibm,plb4", }, { .compatible = "ibm,plb6", }, { .compatible = "ibm,opb", }, @@ -55,15 +57,69 @@ static void quirk_ppc_currituck_usb_fixup(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup); +/* Akebono has an AVR microcontroller attached to the I2C bus + * which is used to power off/reset the system. */ + +/* AVR I2C Commands */ +#define AVR_PWRCTL_CMD (0x26) + +/* Flags for the power control I2C commands */ +#define AVR_PWRCTL_PWROFF (0x01) +#define AVR_PWRCTL_RESET (0x02) + +static struct i2c_client *avr_i2c_client; +static void avr_halt_system(int pwrctl_flags) +{ + /* Request the AVR to reset the system */ + i2c_smbus_write_byte_data(avr_i2c_client, + AVR_PWRCTL_CMD, pwrctl_flags); + + /* Wait for system to be reset */ + while (1) + ; +} + +static void avr_power_off_system(void) +{ + avr_halt_system(AVR_PWRCTL_PWROFF); +} + +static void avr_reset_system(char *cmd) +{ + avr_halt_system(AVR_PWRCTL_RESET); +} + +static int avr_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + avr_i2c_client = client; + ppc_md.restart = avr_reset_system; + ppc_md.power_off = avr_power_off_system; + return 0; +} + +static const struct i2c_device_id avr_id[] = { + { "akebono-avr", 0 }, + { } +}; + +static struct i2c_driver avr_driver = { + .driver = { + .name = "akebono-avr", + }, + .probe = avr_probe, + .id_table = avr_id, +}; + static int __init ppc47x_device_probe(void) { + i2c_add_driver(&avr_driver); of_platform_bus_probe(NULL, ppc47x_of_bus, NULL); return 0; } machine_device_initcall(ppc47x, ppc47x_device_probe); -/* We can have either UICs or MPICs */ static void __init ppc47x_init_irq(void) { struct device_node *np; @@ -157,43 +213,36 @@ static void __init ppc47x_setup_arch(void) { /* No need to check the DMA config as we /know/ our windows are all of - * RAM. Lets hope that doesn't change */ + * RAM. Lets hope that doesn't change */ swiotlb_detect_4g(); ppc47x_smp_init(); } -/* - * Called very early, MMU is off, device-tree isn't unflattened - */ -static int __init ppc47x_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "ibm,currituck")) - return 0; - - return 1; -} - static int board_rev = -1; static int __init ppc47x_get_board_rev(void) { - u8 fpga_reg0; - void *fpga; - struct device_node *np; + int reg; + u8 *fpga; + struct device_node *np = NULL; + + if (of_machine_is_compatible("ibm,currituck")) { + np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga"); + reg = 0; + } else if (of_machine_is_compatible("ibm,akebono")) { + np = of_find_compatible_node(NULL, NULL, "ibm,akebono-fpga"); + reg = 2; + } - np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga"); if (!np) goto fail; - fpga = of_iomap(np, 0); + fpga = (u8 *) of_iomap(np, 0); of_node_put(np); if (!fpga) goto fail; - fpga_reg0 = ioread8(fpga); - board_rev = fpga_reg0 & 0x03; + board_rev = ioread8(fpga + reg) & 0x03; pr_info("%s: Found board revision %d\n", __func__, board_rev); iounmap(fpga); return 0; @@ -208,7 +257,7 @@ machine_arch_initcall(ppc47x, ppc47x_get_board_rev); static void ppc47x_pci_irq_fixup(struct pci_dev *dev) { if (dev->vendor == 0x1033 && (dev->device == 0x0035 || - dev->device == 0x00e0)) { + dev->device == 0x00e0)) { if (board_rev == 0) { dev->irq = irq_create_mapping(NULL, 47); pr_info("%s: Mapping irq %d\n", __func__, dev->irq); @@ -221,13 +270,30 @@ static void ppc47x_pci_irq_fixup(struct pci_dev *dev) } } +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init ppc47x_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "ibm,akebono")) + return 1; + + if (of_flat_dt_is_compatible(root, "ibm,currituck")) { + ppc_md.pci_irq_fixup = ppc47x_pci_irq_fixup; + return 1; + } + + return 0; +} + define_machine(ppc47x) { .name = "PowerPC 47x", .probe = ppc47x_probe, .progress = udbg_progress, .init_IRQ = ppc47x_init_irq, .setup_arch = ppc47x_setup_arch, - .pci_irq_fixup = ppc47x_pci_irq_fixup, .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/ppc476_modules.lds b/arch/powerpc/platforms/44x/ppc476_modules.lds new file mode 100644 index 000000000000..9fec5d34ba8e --- /dev/null +++ b/arch/powerpc/platforms/44x/ppc476_modules.lds @@ -0,0 +1,15 @@ +SECTIONS +{ + .text : ALIGN(4096) + { + *(.text .text.* .fixup) + } + .init.text : ALIGN(4096) + { + *(.init.text .init.text.*) + } + .exit.text : ALIGN(4096) + { + *(.exit.text .exit.text.*) + } +} diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index c17aae80e7ff..f442120e0033 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -38,6 +38,15 @@ config C293_PCIE help This option enables support for the C293PCIE board +config BSC9132_QDS + bool "Freescale BSC9132QDS" + select DEFAULT_UIMAGE + help + This option enables support for the Freescale BSC9132 QDS board. + BSC9132 is a heterogeneous SoC containing dual e500v2 powerpc cores + and dual StarCore SC3850 DSP cores. + Manufacturer : Freescale Semiconductor, Inc + config MPC8540_ADS bool "Freescale MPC8540 ADS" select DEFAULT_UIMAGE @@ -117,11 +126,11 @@ config P1022_RDK This option enables support for the Freescale / iVeia P1022RDK reference board. -config P1023_RDS - bool "Freescale P1023 RDS/RDB" +config P1023_RDB + bool "Freescale P1023 RDB" select DEFAULT_UIMAGE help - This option enables support for the P1023 RDS and RDB boards + This option enables support for the P1023 RDB board. config TWR_P102x bool "Freescale TWR-P102x" @@ -263,11 +272,11 @@ config CORENET_GENERIC help This option enables support for the FSL CoreNet based boards. For 32bit kernel, the following boards are supported: - P2041 RDB, P3041 DS and P4080 DS + P2041 RDB, P3041 DS, P4080 DS, kmcoge4, and OCA4080 For 64bit kernel, the following boards are supported: T4240 QDS and B4 QDS The following boards are supported for both 32bit and 64bit kernel: - P5020 DS and P5040 DS + P5020 DS, P5040 DS and T104xQDS endif # FSL_SOC_BOOKE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 25cebe74ac46..730326046625 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_SMP) += smp.o obj-y += common.o obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o +obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o obj-$(CONFIG_C293_PCIE) += c293pcie.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o @@ -17,7 +18,7 @@ obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o obj-$(CONFIG_P1010_RDB) += p1010rdb.o obj-$(CONFIG_P1022_DS) += p1022_ds.o obj-$(CONFIG_P1022_RDK) += p1022_rdk.o -obj-$(CONFIG_P1023_RDS) += p1023_rds.o +obj-$(CONFIG_P1023_RDB) += p1023_rdb.o obj-$(CONFIG_TWR_P102x) += twr_p102x.o obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o obj-$(CONFIG_STX_GP3) += stx_gp3.o diff --git a/arch/powerpc/platforms/85xx/bsc913x_qds.c b/arch/powerpc/platforms/85xx/bsc913x_qds.c new file mode 100644 index 000000000000..f0927e58af25 --- /dev/null +++ b/arch/powerpc/platforms/85xx/bsc913x_qds.c @@ -0,0 +1,74 @@ +/* + * BSC913xQDS Board Setup + * + * Author: + * Harninder Rai <harninder.rai@freescale.com> + * Priyanka Jain <Priyanka.Jain@freescale.com> + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/of_platform.h> +#include <linux/pci.h> +#include <asm/mpic.h> +#include <sysdev/fsl_soc.h> +#include <asm/udbg.h> + +#include "mpc85xx.h" +#include "smp.h" + +void __init bsc913x_qds_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + if (!mpic) + pr_err("bsc913x: Failed to allocate MPIC structure\n"); + else + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init bsc913x_qds_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("bsc913x_qds_setup_arch()", 0); + +#if defined(CONFIG_SMP) + mpc85xx_smp_init(); +#endif + + pr_info("bsc913x board from Freescale Semiconductor\n"); +} + +machine_device_initcall(bsc9132_qds, mpc85xx_common_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ + +static int __init bsc9132_qds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,bsc9132qds"); +} + +define_machine(bsc9132_qds) { + .name = "BSC9132 QDS", + .probe = bsc9132_qds_probe, + .setup_arch = bsc913x_qds_setup_arch, + .init_IRQ = bsc913x_qds_pic_init, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c index 8e4b1e1a4911..5db1e117fdde 100644 --- a/arch/powerpc/platforms/85xx/corenet_generic.c +++ b/arch/powerpc/platforms/85xx/corenet_generic.c @@ -67,7 +67,7 @@ void __init corenet_gen_setup_arch(void) swiotlb_detect_4g(); - pr_info("%s board from Freescale Semiconductor\n", ppc_md.name); + pr_info("%s board\n", ppc_md.name); mpc85xx_qe_init(); } @@ -115,6 +115,7 @@ int __init corenet_gen_publish_devices(void) static const char * const boards[] __initconst = { "fsl,P2041RDB", "fsl,P3041DS", + "fsl,OCA4080", "fsl,P4080DS", "fsl,P5020DS", "fsl,P5040DS", @@ -122,12 +123,16 @@ static const char * const boards[] __initconst = { "fsl,B4860QDS", "fsl,B4420QDS", "fsl,B4220QDS", + "fsl,T1040QDS", + "fsl,T1042QDS", + "keymile,kmcoge4", NULL }; static const char * const hv_boards[] __initconst = { "fsl,P2041RDB-hv", "fsl,P3041DS-hv", + "fsl,OCA4080-hv", "fsl,P4080DS-hv", "fsl,P5020DS-hv", "fsl,P5040DS-hv", @@ -135,6 +140,8 @@ static const char * const hv_boards[] __initconst = { "fsl,B4860QDS-hv", "fsl,B4420QDS-hv", "fsl,B4220QDS-hv", + "fsl,T1040QDS-hv", + "fsl,T1042QDS-hv", NULL }; diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rdb.c index 0e614007acfb..d5b7509825de 100644 --- a/arch/powerpc/platforms/85xx/p1023_rds.c +++ b/arch/powerpc/platforms/85xx/p1023_rdb.c @@ -4,7 +4,7 @@ * Author: Roy Zang <tie-fei.zang@freescale.com> * * Description: - * P1023 RDS Board Setup + * P1023 RDB Board Setup * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -41,12 +41,12 @@ * Setup the architecture * */ -static void __init mpc85xx_rds_setup_arch(void) +static void __init mpc85xx_rdb_setup_arch(void) { struct device_node *np; if (ppc_md.progress) - ppc_md.progress("p1023_rds_setup_arch()", 0); + ppc_md.progress("p1023_rdb_setup_arch()", 0); /* Map BCSR area */ np = of_find_node_by_name(NULL, "bcsr"); @@ -85,10 +85,9 @@ static void __init mpc85xx_rds_setup_arch(void) fsl_pci_assign_primary(); } -machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices); machine_arch_initcall(p1023_rdb, mpc85xx_common_publish_devices); -static void __init mpc85xx_rds_pic_init(void) +static void __init mpc85xx_rdb_pic_init(void) { struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, @@ -99,14 +98,6 @@ static void __init mpc85xx_rds_pic_init(void) mpic_init(mpic); } -static int __init p1023_rds_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - return of_flat_dt_is_compatible(root, "fsl,P1023RDS"); - -} - static int __init p1023_rdb_probe(void) { unsigned long root = of_get_flat_dt_root(); @@ -115,26 +106,11 @@ static int __init p1023_rdb_probe(void) } -define_machine(p1023_rds) { - .name = "P1023 RDS", - .probe = p1023_rds_probe, - .setup_arch = mpc85xx_rds_setup_arch, - .init_IRQ = mpc85xx_rds_pic_init, - .get_irq = mpic_get_irq, - .restart = fsl_rstcr_restart, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -#ifdef CONFIG_PCI - .pcibios_fixup_bus = fsl_pcibios_fixup_bus, - .pcibios_fixup_phb = fsl_pcibios_fixup_phb, -#endif -}; - define_machine(p1023_rdb) { .name = "P1023 RDB", .probe = p1023_rdb_probe, - .setup_arch = mpc85xx_rds_setup_arch, - .init_IRQ = mpc85xx_rds_pic_init, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, .calibrate_decr = generic_calibrate_decr, diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 6382098d6f8d..ba093f553678 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -27,6 +27,7 @@ #include <asm/cacheflush.h> #include <asm/dbell.h> #include <asm/fsl_guts.h> +#include <asm/code-patching.h> #include <sysdev/fsl_soc.h> #include <sysdev/mpic.h> @@ -267,7 +268,7 @@ out: flush_spin_table(spin_table); out_be32(&spin_table->pir, hw_cpu); out_be64((u64 *)(&spin_table->addr_h), - __pa((u64)*((unsigned long long *)generic_secondary_smp_init))); + __pa(ppc_function_entry(generic_secondary_smp_init))); flush_spin_table(spin_table); #endif diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index d9e2b19b7c8d..43b65ad1970a 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -422,6 +422,7 @@ config CPU_BIG_ENDIAN config CPU_LITTLE_ENDIAN bool "Build little endian kernel" + select PPC64_BOOT_WRAPPER help Build a little endian kernel. @@ -430,3 +431,7 @@ config CPU_LITTLE_ENDIAN little endian powerpc. endchoice + +config PPC64_BOOT_WRAPPER + def_bool n + depends on CPU_LITTLE_ENDIAN diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index 90745eaa45fe..c8017a7bcabd 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -40,6 +40,7 @@ #include <asm/firmware.h> #include <asm/rtas.h> #include <asm/cputhreads.h> +#include <asm/code-patching.h> #include "interrupt.h" #include <asm/udbg.h> @@ -70,8 +71,8 @@ static cpumask_t of_spin_map; static inline int smp_startup_cpu(unsigned int lcpu) { int status; - unsigned long start_here = __pa((u32)*((unsigned long *) - generic_secondary_smp_init)); + unsigned long start_here = + __pa(ppc_function_entry(generic_secondary_smp_init)); unsigned int pcpu; int start_cpu; diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 2a7024d8d8b1..a25f496c2ef9 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -65,6 +65,7 @@ config MVME5100 select PPC_INDIRECT_PCI select PPC_I8259 select PPC_NATIVE + select PPC_UDBG_16550 help This option enables support for the Motorola (now Emerson) MVME5100 board. diff --git a/arch/powerpc/platforms/pasemi/powersave.S b/arch/powerpc/platforms/pasemi/powersave.S index 56f45adcd089..81ab555aa491 100644 --- a/arch/powerpc/platforms/pasemi/powersave.S +++ b/arch/powerpc/platforms/pasemi/powersave.S @@ -66,7 +66,7 @@ sleep_common: std r3, 48(r1) /* Only do power savings when in astate 0 */ - bl .check_astate + bl check_astate cmpwi r3,0 bne 1f diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index 63cebb9b4d45..4ad0d345bc96 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -1,7 +1,7 @@ obj-y += setup.o opal-takeover.o opal-wrappers.o opal.o opal-async.o obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o -obj-y += opal-msglog.o +obj-y += opal-msglog.o subcore.o subcore-asm.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c index 5b51079f3e3b..753f08e36dfa 100644 --- a/arch/powerpc/platforms/powernv/eeh-ioda.c +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -42,11 +42,19 @@ static int ioda_eeh_event(struct notifier_block *nb, { uint64_t changed_evts = (uint64_t)change; - /* We simply send special EEH event */ - if ((changed_evts & OPAL_EVENT_PCI_ERROR) && - (events & OPAL_EVENT_PCI_ERROR) && - eeh_enabled()) + /* + * We simply send special EEH event if EEH has + * been enabled, or clear pending events in + * case that we enable EEH soon + */ + if (!(changed_evts & OPAL_EVENT_PCI_ERROR) || + !(events & OPAL_EVENT_PCI_ERROR)) + return 0; + + if (eeh_enabled()) eeh_send_failure_event(NULL); + else + opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul); return 0; } @@ -141,7 +149,9 @@ static int ioda_eeh_post_init(struct pci_controller *hose) } #ifdef CONFIG_DEBUG_FS - if (phb->dbgfs) { + if (!phb->has_dbgfs && phb->dbgfs) { + phb->has_dbgfs = 1; + debugfs_create_file("err_injct_outbound", 0600, phb->dbgfs, hose, &ioda_eeh_outb_dbgfs_ops); @@ -154,7 +164,14 @@ static int ioda_eeh_post_init(struct pci_controller *hose) } #endif - phb->eeh_state |= PNV_EEH_STATE_ENABLED; + /* If EEH is enabled, we're going to rely on that. + * Otherwise, we restore to conventional mechanism + * to clear frozen PE during PCI config access. + */ + if (eeh_enabled()) + phb->flags |= PNV_PHB_FLAG_EEH; + else + phb->flags &= ~PNV_PHB_FLAG_EEH; return 0; } @@ -268,6 +285,21 @@ static int ioda_eeh_get_state(struct eeh_pe *pe) return EEH_STATE_NOT_SUPPORT; } + /* + * If we're in middle of PE reset, return normal + * state to keep EEH core going. For PHB reset, we + * still expect to have fenced PHB cleared with + * PHB reset. + */ + if (!(pe->type & EEH_PE_PHB) && + (pe->state & EEH_PE_RESET)) { + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE | + EEH_STATE_MMIO_ENABLED | + EEH_STATE_DMA_ENABLED); + return result; + } + /* Retrieve PE status through OPAL */ pe_no = pe->addr; ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, @@ -347,52 +379,6 @@ static int ioda_eeh_get_state(struct eeh_pe *pe) return result; } -static int ioda_eeh_pe_clear(struct eeh_pe *pe) -{ - struct pci_controller *hose; - struct pnv_phb *phb; - u32 pe_no; - u8 fstate; - u16 pcierr; - s64 ret; - - pe_no = pe->addr; - hose = pe->phb; - phb = pe->phb->private_data; - - /* Clear the EEH error on the PE */ - ret = opal_pci_eeh_freeze_clear(phb->opal_id, - pe_no, OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); - if (ret) { - pr_err("%s: Failed to clear EEH error for " - "PHB#%x-PE#%x, err=%lld\n", - __func__, hose->global_number, pe_no, ret); - return -EIO; - } - - /* - * Read the PE state back and verify that the frozen - * state has been removed. - */ - ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, - &fstate, &pcierr, NULL); - if (ret) { - pr_err("%s: Failed to get EEH status on " - "PHB#%x-PE#%x\n, err=%lld\n", - __func__, hose->global_number, pe_no, ret); - return -EIO; - } - - if (fstate != OPAL_EEH_STOPPED_NOT_FROZEN) { - pr_err("%s: Frozen state not cleared on " - "PHB#%x-PE#%x, sts=%x\n", - __func__, hose->global_number, pe_no, fstate); - return -EIO; - } - - return 0; -} - static s64 ioda_eeh_phb_poll(struct pnv_phb *phb) { s64 rc = OPAL_HARDWARE; @@ -402,13 +388,16 @@ static s64 ioda_eeh_phb_poll(struct pnv_phb *phb) if (rc <= 0) break; - msleep(rc); + if (system_state < SYSTEM_RUNNING) + udelay(1000 * rc); + else + msleep(rc); } return rc; } -static int ioda_eeh_phb_reset(struct pci_controller *hose, int option) +int ioda_eeh_phb_reset(struct pci_controller *hose, int option) { struct pnv_phb *phb = hose->private_data; s64 rc = OPAL_HARDWARE; @@ -431,9 +420,17 @@ static int ioda_eeh_phb_reset(struct pci_controller *hose, int option) /* * Poll state of the PHB until the request is done - * successfully. + * successfully. The PHB reset is usually PHB complete + * reset followed by hot reset on root bus. So we also + * need the PCI bus settlement delay. */ rc = ioda_eeh_phb_poll(phb); + if (option == EEH_RESET_DEACTIVATE) { + if (system_state < SYSTEM_RUNNING) + udelay(1000 * EEH_PE_RST_SETTLE_TIME); + else + msleep(EEH_PE_RST_SETTLE_TIME); + } out: if (rc != OPAL_SUCCESS) return -EIO; @@ -471,6 +468,8 @@ static int ioda_eeh_root_reset(struct pci_controller *hose, int option) /* Poll state of the PHB until the request is done */ rc = ioda_eeh_phb_poll(phb); + if (option == EEH_RESET_DEACTIVATE) + msleep(EEH_PE_RST_SETTLE_TIME); out: if (rc != OPAL_SUCCESS) return -EIO; @@ -478,32 +477,71 @@ out: return 0; } -static int ioda_eeh_bridge_reset(struct pci_controller *hose, - struct pci_dev *dev, int option) +static int ioda_eeh_bridge_reset(struct pci_dev *dev, int option) + { - u16 ctrl; + struct device_node *dn = pci_device_to_OF_node(dev); + struct eeh_dev *edev = of_node_to_eeh_dev(dn); + int aer = edev ? edev->aer_cap : 0; + u32 ctrl; - pr_debug("%s: Reset device %04x:%02x:%02x.%01x with option %d\n", - __func__, hose->global_number, dev->bus->number, - PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), option); + pr_debug("%s: Reset PCI bus %04x:%02x with option %d\n", + __func__, pci_domain_nr(dev->bus), + dev->bus->number, option); switch (option) { case EEH_RESET_FUNDAMENTAL: case EEH_RESET_HOT: - pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl); + /* Don't report linkDown event */ + if (aer) { + eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK, + 4, &ctrl); + ctrl |= PCI_ERR_UNC_SURPDN; + eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK, + 4, ctrl); + } + + eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl); ctrl |= PCI_BRIDGE_CTL_BUS_RESET; - pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl); + eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl); + msleep(EEH_PE_RST_HOLD_TIME); + break; case EEH_RESET_DEACTIVATE: - pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl); + eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl); ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; - pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl); + eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl); + msleep(EEH_PE_RST_SETTLE_TIME); + + /* Continue reporting linkDown event */ + if (aer) { + eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK, + 4, &ctrl); + ctrl &= ~PCI_ERR_UNC_SURPDN; + eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK, + 4, ctrl); + } + break; } return 0; } +void pnv_pci_reset_secondary_bus(struct pci_dev *dev) +{ + struct pci_controller *hose; + + if (pci_is_root_bus(dev->bus)) { + hose = pci_bus_to_host(dev->bus); + ioda_eeh_root_reset(hose, EEH_RESET_HOT); + ioda_eeh_root_reset(hose, EEH_RESET_DEACTIVATE); + } else { + ioda_eeh_bridge_reset(dev, EEH_RESET_HOT); + ioda_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE); + } +} + /** * ioda_eeh_reset - Reset the indicated PE * @pe: EEH PE @@ -523,27 +561,18 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option) int ret; /* - * Anyway, we have to clear the problematic state for the - * corresponding PE. However, we needn't do it if the PE - * is PHB associated. That means the PHB is having fatal - * errors and it needs reset. Further more, the AIB interface - * isn't reliable any more. - */ - if (!(pe->type & EEH_PE_PHB) && - (option == EEH_RESET_HOT || - option == EEH_RESET_FUNDAMENTAL)) { - ret = ioda_eeh_pe_clear(pe); - if (ret) - return -EIO; - } - - /* - * The rules applied to reset, either fundamental or hot reset: + * For PHB reset, we always have complete reset. For those PEs whose + * primary bus derived from root complex (root bus) or root port + * (usually bus#1), we apply hot or fundamental reset on the root port. + * For other PEs, we always have hot reset on the PE primary bus. * - * We always reset the direct upstream bridge of the PE. If the - * direct upstream bridge isn't root bridge, we always take hot - * reset no matter what option (fundamental or hot) is. Otherwise, - * we should do the reset according to the required option. + * Here, we have different design to pHyp, which always clear the + * frozen state during PE reset. However, the good idea here from + * benh is to keep frozen state before we get PE reset done completely + * (until BAR restore). With the frozen state, HW drops illegal IO + * or MMIO access, which can incur recrusive frozen PE during PE + * reset. The side effect is that EEH core has to clear the frozen + * state explicitly after BAR restore. */ if (pe->type & EEH_PE_PHB) { ret = ioda_eeh_phb_reset(hose, option); @@ -553,7 +582,7 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option) pci_is_root_bus(bus->parent)) ret = ioda_eeh_root_reset(hose, option); else - ret = ioda_eeh_bridge_reset(hose, bus->self, option); + ret = ioda_eeh_bridge_reset(bus->self, option); } return ret; @@ -640,22 +669,6 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose) } } -static int ioda_eeh_get_phb_pe(struct pci_controller *hose, - struct eeh_pe **pe) -{ - struct eeh_pe *phb_pe; - - phb_pe = eeh_phb_pe_get(hose); - if (!phb_pe) { - pr_warning("%s Can't find PE for PHB#%d\n", - __func__, hose->global_number); - return -EEXIST; - } - - *pe = phb_pe; - return 0; -} - static int ioda_eeh_get_pe(struct pci_controller *hose, u16 pe_no, struct eeh_pe **pe) { @@ -663,7 +676,8 @@ static int ioda_eeh_get_pe(struct pci_controller *hose, struct eeh_dev dev; /* Find the PHB PE */ - if (ioda_eeh_get_phb_pe(hose, &phb_pe)) + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe) return -EEXIST; /* Find the PE according to PE# */ @@ -691,6 +705,7 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) { struct pci_controller *hose; struct pnv_phb *phb; + struct eeh_pe *phb_pe; u64 frozen_pe_no; u16 err_type, severity; long rc; @@ -707,10 +722,12 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) list_for_each_entry(hose, &hose_list, list_node) { /* * If the subordinate PCI buses of the PHB has been - * removed, we needn't take care of it any more. + * removed or is exactly under error recovery, we + * needn't take care of it any more. */ phb = hose->private_data; - if (phb->eeh_state & PNV_EEH_STATE_REMOVED) + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe || (phb_pe->state & EEH_PE_ISOLATED)) continue; rc = opal_pci_next_error(phb->opal_id, @@ -743,12 +760,6 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) switch (err_type) { case OPAL_EEH_IOC_ERROR: if (severity == OPAL_EEH_SEV_IOC_DEAD) { - list_for_each_entry(hose, &hose_list, - list_node) { - phb = hose->private_data; - phb->eeh_state |= PNV_EEH_STATE_REMOVED; - } - pr_err("EEH: dead IOC detected\n"); ret = EEH_NEXT_ERR_DEAD_IOC; } else if (severity == OPAL_EEH_SEV_INF) { @@ -761,17 +772,12 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) break; case OPAL_EEH_PHB_ERROR: if (severity == OPAL_EEH_SEV_PHB_DEAD) { - if (ioda_eeh_get_phb_pe(hose, pe)) - break; - + *pe = phb_pe; pr_err("EEH: dead PHB#%x detected\n", hose->global_number); - phb->eeh_state |= PNV_EEH_STATE_REMOVED; ret = EEH_NEXT_ERR_DEAD_PHB; } else if (severity == OPAL_EEH_SEV_PHB_FENCED) { - if (ioda_eeh_get_phb_pe(hose, pe)) - break; - + *pe = phb_pe; pr_err("EEH: fenced PHB#%x detected\n", hose->global_number); ret = EEH_NEXT_ERR_FENCED_PHB; @@ -789,17 +795,21 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) * If we can't find the corresponding PE, the * PEEV / PEST would be messy. So we force an * fenced PHB so that it can be recovered. + * + * If the PE has been marked as isolated, that + * should have been removed permanently or in + * progress with recovery. We needn't report + * it again. */ if (ioda_eeh_get_pe(hose, frozen_pe_no, pe)) { - if (!ioda_eeh_get_phb_pe(hose, pe)) { - pr_err("EEH: Escalated fenced PHB#%x " - "detected for PE#%llx\n", - hose->global_number, - frozen_pe_no); - ret = EEH_NEXT_ERR_FENCED_PHB; - } else { - ret = EEH_NEXT_ERR_NONE; - } + *pe = phb_pe; + pr_err("EEH: Escalated fenced PHB#%x " + "detected for PE#%llx\n", + hose->global_number, + frozen_pe_no); + ret = EEH_NEXT_ERR_FENCED_PHB; + } else if ((*pe)->state & EEH_PE_ISOLATED) { + ret = EEH_NEXT_ERR_NONE; } else { pr_err("EEH: Frozen PE#%x on PHB#%x detected\n", (*pe)->addr, (*pe)->phb->global_number); diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index a59788e83b8b..56a206f32f77 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -126,6 +126,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag) edev->mode &= 0xFFFFFF00; if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) edev->mode |= EEH_DEV_BRIDGE; + edev->pcix_cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (pci_is_pcie(dev)) { edev->pcie_cap = pci_pcie_cap(dev); @@ -133,6 +134,9 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag) edev->mode |= EEH_DEV_ROOT_PORT; else if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM) edev->mode |= EEH_DEV_DS_PORT; + + edev->aer_cap = pci_find_ext_capability(dev, + PCI_EXT_CAP_ID_ERR); } edev->config_addr = ((dev->bus->number << 8) | dev->devfn); diff --git a/arch/powerpc/platforms/powernv/opal-flash.c b/arch/powerpc/platforms/powernv/opal-flash.c index dc487ff04704..5c21d9c07f45 100644 --- a/arch/powerpc/platforms/powernv/opal-flash.c +++ b/arch/powerpc/platforms/powernv/opal-flash.c @@ -20,6 +20,7 @@ #include <linux/mm.h> #include <linux/vmalloc.h> #include <linux/pagemap.h> +#include <linux/delay.h> #include <asm/opal.h> @@ -130,7 +131,8 @@ static inline void opal_flash_validate(void) { long ret; void *buf = validate_flash_data.buf; - __be32 size, result; + __be32 size = cpu_to_be32(validate_flash_data.buf_size); + __be32 result; ret = opal_validate_flash(__pa(buf), &size, &result); @@ -290,11 +292,6 @@ static int opal_flash_update(int op) /* First entry address */ addr = __pa(list); - pr_alert("FLASH: Image is %u bytes\n", image_data.size); - pr_alert("FLASH: Image update requested\n"); - pr_alert("FLASH: Image will be updated during system reboot\n"); - pr_alert("FLASH: This will take several minutes. Do not power off!\n"); - flash: rc = opal_update_flash(addr); @@ -302,6 +299,47 @@ invalid_img: return rc; } +/* Return CPUs to OPAL before starting FW update */ +static void flash_return_cpu(void *info) +{ + int cpu = smp_processor_id(); + + if (!cpu_online(cpu)) + return; + + /* Disable IRQ */ + hard_irq_disable(); + + /* Return the CPU to OPAL */ + opal_return_cpu(); +} + +/* This gets called just before system reboots */ +void opal_flash_term_callback(void) +{ + struct cpumask mask; + + if (update_flash_data.status != FLASH_IMG_READY) + return; + + pr_alert("FLASH: Flashing new firmware\n"); + pr_alert("FLASH: Image is %u bytes\n", image_data.size); + pr_alert("FLASH: Performing flash and reboot/shutdown\n"); + pr_alert("FLASH: This will take several minutes. Do not power off!\n"); + + /* Small delay to help getting the above message out */ + msleep(500); + + /* Return secondary CPUs to firmware */ + cpumask_copy(&mask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &mask); + if (!cpumask_empty(&mask)) + smp_call_function_many(&mask, + flash_return_cpu, NULL, false); + /* Hard disable interrupts */ + hard_irq_disable(); +} + /* * Show candidate image status */ diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c index 79d83cad3d67..f04b4d8aca5a 100644 --- a/arch/powerpc/platforms/powernv/opal-lpc.c +++ b/arch/powerpc/platforms/powernv/opal-lpc.c @@ -12,12 +12,17 @@ #include <linux/kernel.h> #include <linux/of.h> #include <linux/bug.h> +#include <linux/debugfs.h> +#include <linux/io.h> +#include <linux/slab.h> #include <asm/machdep.h> #include <asm/firmware.h> #include <asm/xics.h> #include <asm/opal.h> #include <asm/prom.h> +#include <asm/uaccess.h> +#include <asm/debug.h> static int opal_lpc_chip_id = -1; @@ -176,6 +181,152 @@ static const struct ppc_pci_io opal_lpc_io = { .outsl = opal_lpc_outsl, }; +#ifdef CONFIG_DEBUG_FS +struct lpc_debugfs_entry { + enum OpalLPCAddressType lpc_type; +}; + +static ssize_t lpc_debug_read(struct file *filp, char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct lpc_debugfs_entry *lpc = filp->private_data; + u32 data, pos, len, todo; + int rc; + + if (!access_ok(VERIFY_WRITE, ubuf, count)) + return -EFAULT; + + todo = count; + while (todo) { + pos = *ppos; + + /* + * Select access size based on count and alignment and + * access type. IO and MEM only support byte acceses, + * FW supports all 3. + */ + len = 1; + if (lpc->lpc_type == OPAL_LPC_FW) { + if (todo > 3 && (pos & 3) == 0) + len = 4; + else if (todo > 1 && (pos & 1) == 0) + len = 2; + } + rc = opal_lpc_read(opal_lpc_chip_id, lpc->lpc_type, pos, + &data, len); + if (rc) + return -ENXIO; + switch(len) { + case 4: + rc = __put_user((u32)data, (u32 __user *)ubuf); + break; + case 2: + rc = __put_user((u16)data, (u16 __user *)ubuf); + break; + default: + rc = __put_user((u8)data, (u8 __user *)ubuf); + break; + } + if (rc) + return -EFAULT; + *ppos += len; + ubuf += len; + todo -= len; + } + + return count; +} + +static ssize_t lpc_debug_write(struct file *filp, const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct lpc_debugfs_entry *lpc = filp->private_data; + u32 data, pos, len, todo; + int rc; + + if (!access_ok(VERIFY_READ, ubuf, count)) + return -EFAULT; + + todo = count; + while (todo) { + pos = *ppos; + + /* + * Select access size based on count and alignment and + * access type. IO and MEM only support byte acceses, + * FW supports all 3. + */ + len = 1; + if (lpc->lpc_type == OPAL_LPC_FW) { + if (todo > 3 && (pos & 3) == 0) + len = 4; + else if (todo > 1 && (pos & 1) == 0) + len = 2; + } + switch(len) { + case 4: + rc = __get_user(data, (u32 __user *)ubuf); + break; + case 2: + rc = __get_user(data, (u16 __user *)ubuf); + break; + default: + rc = __get_user(data, (u8 __user *)ubuf); + break; + } + if (rc) + return -EFAULT; + + rc = opal_lpc_write(opal_lpc_chip_id, lpc->lpc_type, pos, + data, len); + if (rc) + return -ENXIO; + *ppos += len; + ubuf += len; + todo -= len; + } + + return count; +} + +static const struct file_operations lpc_fops = { + .read = lpc_debug_read, + .write = lpc_debug_write, + .open = simple_open, + .llseek = default_llseek, +}; + +static int opal_lpc_debugfs_create_type(struct dentry *folder, + const char *fname, + enum OpalLPCAddressType type) +{ + struct lpc_debugfs_entry *entry; + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + return -ENOMEM; + entry->lpc_type = type; + debugfs_create_file(fname, 0600, folder, entry, &lpc_fops); + return 0; +} + +static int opal_lpc_init_debugfs(void) +{ + struct dentry *root; + int rc = 0; + + if (opal_lpc_chip_id < 0) + return -ENODEV; + + root = debugfs_create_dir("lpc", powerpc_debugfs_root); + + rc |= opal_lpc_debugfs_create_type(root, "io", OPAL_LPC_IO); + rc |= opal_lpc_debugfs_create_type(root, "mem", OPAL_LPC_MEM); + rc |= opal_lpc_debugfs_create_type(root, "fw", OPAL_LPC_FW); + return rc; +} +device_initcall(opal_lpc_init_debugfs); +#endif /* CONFIG_DEBUG_FS */ + void opal_lpc_init(void) { struct device_node *np; diff --git a/arch/powerpc/platforms/powernv/opal-memory-errors.c b/arch/powerpc/platforms/powernv/opal-memory-errors.c index ec4132239cdf..b17a34b695ef 100644 --- a/arch/powerpc/platforms/powernv/opal-memory-errors.c +++ b/arch/powerpc/platforms/powernv/opal-memory-errors.c @@ -47,12 +47,12 @@ static void handle_memory_error_event(struct OpalMemoryErrorData *merr_evt) __func__, merr_evt->type); switch (merr_evt->type) { case OPAL_MEM_ERR_TYPE_RESILIENCE: - paddr_start = merr_evt->u.resilience.physical_address_start; - paddr_end = merr_evt->u.resilience.physical_address_end; + paddr_start = be64_to_cpu(merr_evt->u.resilience.physical_address_start); + paddr_end = be64_to_cpu(merr_evt->u.resilience.physical_address_end); break; case OPAL_MEM_ERR_TYPE_DYN_DALLOC: - paddr_start = merr_evt->u.dyn_dealloc.physical_address_start; - paddr_end = merr_evt->u.dyn_dealloc.physical_address_end; + paddr_start = be64_to_cpu(merr_evt->u.dyn_dealloc.physical_address_start); + paddr_end = be64_to_cpu(merr_evt->u.dyn_dealloc.physical_address_end); break; default: return; diff --git a/arch/powerpc/platforms/powernv/opal-takeover.S b/arch/powerpc/platforms/powernv/opal-takeover.S index 3cd262897c27..11a3169ee583 100644 --- a/arch/powerpc/platforms/powernv/opal-takeover.S +++ b/arch/powerpc/platforms/powernv/opal-takeover.S @@ -21,11 +21,13 @@ _GLOBAL(opal_query_takeover) mfcr r0 stw r0,8(r1) + stdu r1,-STACKFRAMESIZE(r1) std r3,STK_PARAM(R3)(r1) std r4,STK_PARAM(R4)(r1) li r3,H_HAL_TAKEOVER li r4,H_HAL_TAKEOVER_QUERY_MAGIC HVSC + addi r1,r1,STACKFRAMESIZE ld r10,STK_PARAM(R3)(r1) std r4,0(r10) ld r10,STK_PARAM(R4)(r1) diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S index f531ffe35b3e..4abbff22a61f 100644 --- a/arch/powerpc/platforms/powernv/opal-wrappers.S +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S @@ -32,7 +32,7 @@ std r12,PACASAVEDMSR(r13); \ andc r12,r12,r0; \ mtmsrd r12,1; \ - LOAD_REG_ADDR(r0,.opal_return); \ + LOAD_REG_ADDR(r0,opal_return); \ mtlr r0; \ li r0,MSR_DR|MSR_IR|MSR_LE;\ andc r12,r12,r0; \ @@ -44,7 +44,7 @@ mtspr SPRN_HSRR0,r12; \ hrfid -_STATIC(opal_return) +opal_return: /* * Fixup endian on OPAL return... we should be able to simplify * this by instead converting the below trampoline to a set of @@ -124,6 +124,7 @@ OPAL_CALL(opal_xscom_write, OPAL_XSCOM_WRITE); OPAL_CALL(opal_lpc_read, OPAL_LPC_READ); OPAL_CALL(opal_lpc_write, OPAL_LPC_WRITE); OPAL_CALL(opal_return_cpu, OPAL_RETURN_CPU); +OPAL_CALL(opal_reinit_cpus, OPAL_REINIT_CPUS); OPAL_CALL(opal_read_elog, OPAL_ELOG_READ); OPAL_CALL(opal_send_ack_elog, OPAL_ELOG_ACK); OPAL_CALL(opal_get_elog_size, OPAL_ELOG_SIZE); diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index f343183add07..199975613fe9 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -57,6 +57,21 @@ static DEFINE_SPINLOCK(opal_notifier_lock); static uint64_t last_notified_mask = 0x0ul; static atomic_t opal_notifier_hold = ATOMIC_INIT(0); +static void opal_reinit_cores(void) +{ + /* Do the actual re-init, This will clobber all FPRs, VRs, etc... + * + * It will preserve non volatile GPRs and HSPRG0/1. It will + * also restore HIDs and other SPRs to their original value + * but it might clobber a bunch. + */ +#ifdef __BIG_ENDIAN__ + opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_BE); +#else + opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_LE); +#endif +} + int __init early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data) { @@ -96,6 +111,13 @@ int __init early_init_dt_scan_opal(unsigned long node, printk("OPAL V1 detected !\n"); } + /* Reinit all cores with the right endian */ + opal_reinit_cores(); + + /* Restore some bits */ + if (cur_cpu_spec->cpu_restore) + cur_cpu_spec->cpu_restore(); + return 1; } diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 98824aa99173..de19edeaa7a7 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/crash_dump.h> #include <linux/debugfs.h> #include <linux/delay.h> #include <linux/string.h> @@ -663,15 +664,15 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, * errors, and on the first pass the data will be a relative * bus number, print that out instead. */ - tbl->it_busno = 0; pe->tce_inval_reg_phys = be64_to_cpup(swinvp); tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys, 8); - tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE | - TCE_PCI_SWINV_PAIR; + tbl->it_type |= (TCE_PCI_SWINV_CREATE | + TCE_PCI_SWINV_FREE | + TCE_PCI_SWINV_PAIR); } iommu_init_table(tbl, phb->hose->node); - iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number); + iommu_register_group(tbl, phb->hose->global_number, pe->pe_number); if (pe->pdev) set_iommu_table_base_and_group(&pe->pdev->dev, tbl); @@ -793,14 +794,13 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, * errors, and on the first pass the data will be a relative * bus number, print that out instead. */ - tbl->it_busno = 0; pe->tce_inval_reg_phys = be64_to_cpup(swinvp); tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys, 8); - tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE; + tbl->it_type |= (TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE); } iommu_init_table(tbl, phb->hose->node); - iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number); + iommu_register_group(tbl, phb->hose->global_number, pe->pe_number); if (pe->pdev) set_iommu_table_base_and_group(&pe->pdev->dev, tbl); @@ -1386,12 +1386,24 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, ppc_md.pcibios_fixup = pnv_pci_ioda_fixup; ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook; ppc_md.pcibios_window_alignment = pnv_pci_window_alignment; + ppc_md.pcibios_reset_secondary_bus = pnv_pci_reset_secondary_bus; pci_add_flags(PCI_REASSIGN_ALL_RSRC); /* Reset IODA tables to a clean state */ rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET); if (rc) pr_warning(" OPAL Error %ld performing IODA table reset !\n", rc); + + /* If we're running in kdump kerenl, the previous kerenl never + * shutdown PCI devices correctly. We already got IODA table + * cleaned out. So we have to issue PHB reset to stop all PCI + * transactions from previous kerenl. + */ + if (is_kdump_kernel()) { + pr_info(" Issue PHB reset ...\n"); + ioda_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL); + ioda_eeh_phb_reset(hose, OPAL_DEASSERT_RESET); + } } void __init pnv_pci_init_ioda2_phb(struct device_node *np) diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 8518817dcdfd..eefbfcc3fd8c 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -131,65 +131,60 @@ static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose, int i; data = (struct OpalIoP7IOCPhbErrorData *)common; - pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n\n", + pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n", hose->global_number, common->version); if (data->brdgCtl) - pr_info(" brdgCtl: %08x\n", + pr_info("brdgCtl: %08x\n", data->brdgCtl); if (data->portStatusReg || data->rootCmplxStatus || data->busAgentStatus) - pr_info(" UtlSts: %08x %08x %08x\n", + pr_info("UtlSts: %08x %08x %08x\n", data->portStatusReg, data->rootCmplxStatus, data->busAgentStatus); if (data->deviceStatus || data->slotStatus || data->linkStatus || data->devCmdStatus || data->devSecStatus) - pr_info(" RootSts: %08x %08x %08x %08x %08x\n", + pr_info("RootSts: %08x %08x %08x %08x %08x\n", data->deviceStatus, data->slotStatus, data->linkStatus, data->devCmdStatus, data->devSecStatus); if (data->rootErrorStatus || data->uncorrErrorStatus || data->corrErrorStatus) - pr_info(" RootErrSts: %08x %08x %08x\n", + pr_info("RootErrSts: %08x %08x %08x\n", data->rootErrorStatus, data->uncorrErrorStatus, data->corrErrorStatus); if (data->tlpHdr1 || data->tlpHdr2 || data->tlpHdr3 || data->tlpHdr4) - pr_info(" RootErrLog: %08x %08x %08x %08x\n", + pr_info("RootErrLog: %08x %08x %08x %08x\n", data->tlpHdr1, data->tlpHdr2, data->tlpHdr3, data->tlpHdr4); if (data->sourceId || data->errorClass || data->correlator) - pr_info(" RootErrLog1: %08x %016llx %016llx\n", + pr_info("RootErrLog1: %08x %016llx %016llx\n", data->sourceId, data->errorClass, data->correlator); if (data->p7iocPlssr || data->p7iocCsr) - pr_info(" PhbSts: %016llx %016llx\n", + pr_info("PhbSts: %016llx %016llx\n", data->p7iocPlssr, data->p7iocCsr); - if (data->lemFir || data->lemErrorMask || - data->lemWOF) - pr_info(" Lem: %016llx %016llx %016llx\n", + if (data->lemFir) + pr_info("Lem: %016llx %016llx %016llx\n", data->lemFir, data->lemErrorMask, data->lemWOF); - if (data->phbErrorStatus || data->phbFirstErrorStatus || - data->phbErrorLog0 || data->phbErrorLog1) - pr_info(" PhbErr: %016llx %016llx %016llx %016llx\n", + if (data->phbErrorStatus) + pr_info("PhbErr: %016llx %016llx %016llx %016llx\n", data->phbErrorStatus, data->phbFirstErrorStatus, data->phbErrorLog0, data->phbErrorLog1); - if (data->mmioErrorStatus || data->mmioFirstErrorStatus || - data->mmioErrorLog0 || data->mmioErrorLog1) - pr_info(" OutErr: %016llx %016llx %016llx %016llx\n", + if (data->mmioErrorStatus) + pr_info("OutErr: %016llx %016llx %016llx %016llx\n", data->mmioErrorStatus, data->mmioFirstErrorStatus, data->mmioErrorLog0, data->mmioErrorLog1); - if (data->dma0ErrorStatus || data->dma0FirstErrorStatus || - data->dma0ErrorLog0 || data->dma0ErrorLog1) - pr_info(" InAErr: %016llx %016llx %016llx %016llx\n", + if (data->dma0ErrorStatus) + pr_info("InAErr: %016llx %016llx %016llx %016llx\n", data->dma0ErrorStatus, data->dma0FirstErrorStatus, data->dma0ErrorLog0, data->dma0ErrorLog1); - if (data->dma1ErrorStatus || data->dma1FirstErrorStatus || - data->dma1ErrorLog0 || data->dma1ErrorLog1) - pr_info(" InBErr: %016llx %016llx %016llx %016llx\n", + if (data->dma1ErrorStatus) + pr_info("InBErr: %016llx %016llx %016llx %016llx\n", data->dma1ErrorStatus, data->dma1FirstErrorStatus, data->dma1ErrorLog0, data->dma1ErrorLog1); @@ -198,7 +193,7 @@ static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose, (data->pestB[i] >> 63) == 0) continue; - pr_info(" PE[%3d] A/B: %016llx %016llx\n", + pr_info("PE[%3d] A/B: %016llx %016llx\n", i, data->pestA[i], data->pestB[i]); } } @@ -210,69 +205,63 @@ static void pnv_pci_dump_phb3_diag_data(struct pci_controller *hose, int i; data = (struct OpalIoPhb3ErrorData*)common; - pr_info("PHB3 PHB#%d Diag-data (Version: %d)\n\n", + pr_info("PHB3 PHB#%d Diag-data (Version: %d)\n", hose->global_number, common->version); if (data->brdgCtl) - pr_info(" brdgCtl: %08x\n", + pr_info("brdgCtl: %08x\n", data->brdgCtl); if (data->portStatusReg || data->rootCmplxStatus || data->busAgentStatus) - pr_info(" UtlSts: %08x %08x %08x\n", + pr_info("UtlSts: %08x %08x %08x\n", data->portStatusReg, data->rootCmplxStatus, data->busAgentStatus); if (data->deviceStatus || data->slotStatus || data->linkStatus || data->devCmdStatus || data->devSecStatus) - pr_info(" RootSts: %08x %08x %08x %08x %08x\n", + pr_info("RootSts: %08x %08x %08x %08x %08x\n", data->deviceStatus, data->slotStatus, data->linkStatus, data->devCmdStatus, data->devSecStatus); if (data->rootErrorStatus || data->uncorrErrorStatus || data->corrErrorStatus) - pr_info(" RootErrSts: %08x %08x %08x\n", + pr_info("RootErrSts: %08x %08x %08x\n", data->rootErrorStatus, data->uncorrErrorStatus, data->corrErrorStatus); if (data->tlpHdr1 || data->tlpHdr2 || data->tlpHdr3 || data->tlpHdr4) - pr_info(" RootErrLog: %08x %08x %08x %08x\n", + pr_info("RootErrLog: %08x %08x %08x %08x\n", data->tlpHdr1, data->tlpHdr2, data->tlpHdr3, data->tlpHdr4); if (data->sourceId || data->errorClass || data->correlator) - pr_info(" RootErrLog1: %08x %016llx %016llx\n", + pr_info("RootErrLog1: %08x %016llx %016llx\n", data->sourceId, data->errorClass, data->correlator); - if (data->nFir || data->nFirMask || - data->nFirWOF) - pr_info(" nFir: %016llx %016llx %016llx\n", + if (data->nFir) + pr_info("nFir: %016llx %016llx %016llx\n", data->nFir, data->nFirMask, data->nFirWOF); if (data->phbPlssr || data->phbCsr) - pr_info(" PhbSts: %016llx %016llx\n", + pr_info("PhbSts: %016llx %016llx\n", data->phbPlssr, data->phbCsr); - if (data->lemFir || data->lemErrorMask || - data->lemWOF) - pr_info(" Lem: %016llx %016llx %016llx\n", + if (data->lemFir) + pr_info("Lem: %016llx %016llx %016llx\n", data->lemFir, data->lemErrorMask, data->lemWOF); - if (data->phbErrorStatus || data->phbFirstErrorStatus || - data->phbErrorLog0 || data->phbErrorLog1) - pr_info(" PhbErr: %016llx %016llx %016llx %016llx\n", + if (data->phbErrorStatus) + pr_info("PhbErr: %016llx %016llx %016llx %016llx\n", data->phbErrorStatus, data->phbFirstErrorStatus, data->phbErrorLog0, data->phbErrorLog1); - if (data->mmioErrorStatus || data->mmioFirstErrorStatus || - data->mmioErrorLog0 || data->mmioErrorLog1) - pr_info(" OutErr: %016llx %016llx %016llx %016llx\n", + if (data->mmioErrorStatus) + pr_info("OutErr: %016llx %016llx %016llx %016llx\n", data->mmioErrorStatus, data->mmioFirstErrorStatus, data->mmioErrorLog0, data->mmioErrorLog1); - if (data->dma0ErrorStatus || data->dma0FirstErrorStatus || - data->dma0ErrorLog0 || data->dma0ErrorLog1) - pr_info(" InAErr: %016llx %016llx %016llx %016llx\n", + if (data->dma0ErrorStatus) + pr_info("InAErr: %016llx %016llx %016llx %016llx\n", data->dma0ErrorStatus, data->dma0FirstErrorStatus, data->dma0ErrorLog0, data->dma0ErrorLog1); - if (data->dma1ErrorStatus || data->dma1FirstErrorStatus || - data->dma1ErrorLog0 || data->dma1ErrorLog1) - pr_info(" InBErr: %016llx %016llx %016llx %016llx\n", + if (data->dma1ErrorStatus) + pr_info("InBErr: %016llx %016llx %016llx %016llx\n", data->dma1ErrorStatus, data->dma1FirstErrorStatus, data->dma1ErrorLog0, data->dma1ErrorLog1); @@ -281,7 +270,7 @@ static void pnv_pci_dump_phb3_diag_data(struct pci_controller *hose, (data->pestB[i] >> 63) == 0) continue; - pr_info(" PE[%3d] A/B: %016llx %016llx\n", + pr_info("PE[%3d] A/B: %016llx %016llx\n", i, data->pestA[i], data->pestB[i]); } } @@ -384,9 +373,6 @@ int pnv_pci_cfg_read(struct device_node *dn, struct pci_dn *pdn = PCI_DN(dn); struct pnv_phb *phb = pdn->phb->private_data; u32 bdfn = (pdn->busno << 8) | pdn->devfn; -#ifdef CONFIG_EEH - struct eeh_pe *phb_pe = NULL; -#endif s64 rc; switch (size) { @@ -412,31 +398,9 @@ int pnv_pci_cfg_read(struct device_node *dn, default: return PCIBIOS_FUNC_NOT_SUPPORTED; } + cfg_dbg("%s: bus: %x devfn: %x +%x/%x -> %08x\n", __func__, pdn->busno, pdn->devfn, where, size, *val); - - /* - * Check if the specified PE has been put into frozen - * state. On the other hand, we needn't do that while - * the PHB has been put into frozen state because of - * PHB-fatal errors. - */ -#ifdef CONFIG_EEH - phb_pe = eeh_phb_pe_get(pdn->phb); - if (phb_pe && (phb_pe->state & EEH_PE_ISOLATED)) - return PCIBIOS_SUCCESSFUL; - - if (phb->eeh_state & PNV_EEH_STATE_ENABLED) { - if (*val == EEH_IO_ERROR_VALUE(size) && - eeh_dev_check_failure(of_node_to_eeh_dev(dn))) - return PCIBIOS_DEVICE_NOT_FOUND; - } else { - pnv_pci_config_check_eeh(phb, dn); - } -#else - pnv_pci_config_check_eeh(phb, dn); -#endif - return PCIBIOS_SUCCESSFUL; } @@ -463,33 +427,74 @@ int pnv_pci_cfg_write(struct device_node *dn, return PCIBIOS_FUNC_NOT_SUPPORTED; } - /* Check if the PHB got frozen due to an error (no response) */ -#ifdef CONFIG_EEH - if (!(phb->eeh_state & PNV_EEH_STATE_ENABLED)) - pnv_pci_config_check_eeh(phb, dn); -#else - pnv_pci_config_check_eeh(phb, dn); -#endif - return PCIBIOS_SUCCESSFUL; } +#if CONFIG_EEH +static bool pnv_pci_cfg_check(struct pci_controller *hose, + struct device_node *dn) +{ + struct eeh_dev *edev = NULL; + struct pnv_phb *phb = hose->private_data; + + /* EEH not enabled ? */ + if (!(phb->flags & PNV_PHB_FLAG_EEH)) + return true; + + /* PE reset or device removed ? */ + edev = of_node_to_eeh_dev(dn); + if (edev) { + if (edev->pe && + (edev->pe->state & EEH_PE_RESET)) + return false; + + if (edev->mode & EEH_DEV_REMOVED) + return false; + } + + return true; +} +#else +static inline pnv_pci_cfg_check(struct pci_controller *hose, + struct device_node *dn) +{ + return true; +} +#endif /* CONFIG_EEH */ + static int pnv_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { struct device_node *dn, *busdn = pci_bus_to_OF_node(bus); struct pci_dn *pdn; + struct pnv_phb *phb; + bool found = false; + int ret; + *val = 0xFFFFFFFF; for (dn = busdn->child; dn; dn = dn->sibling) { pdn = PCI_DN(dn); - if (pdn && pdn->devfn == devfn) - return pnv_pci_cfg_read(dn, where, size, val); + if (pdn && pdn->devfn == devfn) { + phb = pdn->phb->private_data; + found = true; + break; + } } - *val = 0xFFFFFFFF; - return PCIBIOS_DEVICE_NOT_FOUND; + if (!found || !pnv_pci_cfg_check(pdn->phb, dn)) + return PCIBIOS_DEVICE_NOT_FOUND; + ret = pnv_pci_cfg_read(dn, where, size, val); + if (phb->flags & PNV_PHB_FLAG_EEH) { + if (*val == EEH_IO_ERROR_VALUE(size) && + eeh_dev_check_failure(of_node_to_eeh_dev(dn))) + return PCIBIOS_DEVICE_NOT_FOUND; + } else { + pnv_pci_config_check_eeh(phb, dn); + } + + return ret; } static int pnv_pci_write_config(struct pci_bus *bus, @@ -498,14 +503,27 @@ static int pnv_pci_write_config(struct pci_bus *bus, { struct device_node *dn, *busdn = pci_bus_to_OF_node(bus); struct pci_dn *pdn; + struct pnv_phb *phb; + bool found = false; + int ret; for (dn = busdn->child; dn; dn = dn->sibling) { pdn = PCI_DN(dn); - if (pdn && pdn->devfn == devfn) - return pnv_pci_cfg_write(dn, where, size, val); + if (pdn && pdn->devfn == devfn) { + phb = pdn->phb->private_data; + found = true; + break; + } } - return PCIBIOS_DEVICE_NOT_FOUND; + if (!found || !pnv_pci_cfg_check(pdn->phb, dn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + ret = pnv_pci_cfg_write(dn, where, size, val); + if (!(phb->flags & PNV_PHB_FLAG_EEH)) + pnv_pci_config_check_eeh(phb, dn); + + return ret; } struct pci_ops pnv_pci_ops = { diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index cde169442775..676232c34328 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -81,28 +81,27 @@ struct pnv_eeh_ops { int (*configure_bridge)(struct eeh_pe *pe); int (*next_error)(struct eeh_pe **pe); }; - -#define PNV_EEH_STATE_ENABLED (1 << 0) /* EEH enabled */ -#define PNV_EEH_STATE_REMOVED (1 << 1) /* PHB removed */ - #endif /* CONFIG_EEH */ +#define PNV_PHB_FLAG_EEH (1 << 0) + struct pnv_phb { struct pci_controller *hose; enum pnv_phb_type type; enum pnv_phb_model model; u64 hub_id; u64 opal_id; + int flags; void __iomem *regs; int initialized; spinlock_t lock; #ifdef CONFIG_EEH struct pnv_eeh_ops *eeh_ops; - int eeh_state; #endif #ifdef CONFIG_DEBUG_FS + int has_dbgfs; struct dentry *dbgfs; #endif @@ -205,5 +204,7 @@ extern void pnv_pci_init_ioda_hub(struct device_node *np); extern void pnv_pci_init_ioda2_phb(struct device_node *np); extern void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl, __be64 *startp, __be64 *endp, bool rm); +extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev); +extern int ioda_eeh_phb_reset(struct pci_controller *hose, int option); #endif /* __POWERNV_PCI_H */ diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h index 0051e108ef0f..75501bfede7f 100644 --- a/arch/powerpc/platforms/powernv/powernv.h +++ b/arch/powerpc/platforms/powernv/powernv.h @@ -25,4 +25,6 @@ static inline int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask) extern void pnv_lpc_init(void); +bool cpu_core_split_required(void); + #endif /* _POWERNV_H */ diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 8723d32632f5..8c16a5f96728 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -27,6 +27,7 @@ #include <linux/interrupt.h> #include <linux/bug.h> #include <linux/pci.h> +#include <linux/cpufreq.h> #include <asm/machdep.h> #include <asm/firmware.h> @@ -98,11 +99,32 @@ static void pnv_show_cpuinfo(struct seq_file *m) of_node_put(root); } +static void pnv_prepare_going_down(void) +{ + /* + * Disable all notifiers from OPAL, we can't + * service interrupts anymore anyway + */ + opal_notifier_disable(); + + /* Soft disable interrupts */ + local_irq_disable(); + + /* + * Return secondary CPUs to firwmare if a flash update + * is pending otherwise we will get all sort of error + * messages about CPU being stuck etc.. This will also + * have the side effect of hard disabling interrupts so + * past this point, the kernel is effectively dead. + */ + opal_flash_term_callback(); +} + static void __noreturn pnv_restart(char *cmd) { long rc = OPAL_BUSY; - opal_notifier_disable(); + pnv_prepare_going_down(); while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { rc = opal_cec_reboot(); @@ -119,7 +141,7 @@ static void __noreturn pnv_power_off(void) { long rc = OPAL_BUSY; - opal_notifier_disable(); + pnv_prepare_going_down(); while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { rc = opal_cec_power_down(0); @@ -222,6 +244,13 @@ static void pnv_kexec_cpu_down(int crash_shutdown, int secondary) } #endif /* CONFIG_KEXEC */ +#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE +static unsigned long pnv_memory_block_size(void) +{ + return 256UL * 1024 * 1024; +} +#endif + static void __init pnv_setup_machdep_opal(void) { ppc_md.get_boot_time = opal_get_boot_time; @@ -269,6 +298,25 @@ static int __init pnv_probe(void) return 1; } +/* + * Returns the cpu frequency for 'cpu' in Hz. This is used by + * /proc/cpuinfo + */ +unsigned long pnv_get_proc_freq(unsigned int cpu) +{ + unsigned long ret_freq; + + ret_freq = cpufreq_quick_get(cpu) * 1000ul; + + /* + * If the backend cpufreq driver does not exist, + * then fallback to old way of reporting the clockrate. + */ + if (!ret_freq) + ret_freq = ppc_proc_freq; + return ret_freq; +} + define_machine(powernv) { .name = "PowerNV", .probe = pnv_probe, @@ -276,6 +324,7 @@ define_machine(powernv) { .setup_arch = pnv_setup_arch, .init_IRQ = pnv_init_IRQ, .show_cpuinfo = pnv_show_cpuinfo, + .get_proc_freq = pnv_get_proc_freq, .progress = pnv_progress, .machine_shutdown = pnv_shutdown, .power_save = power7_idle, @@ -284,4 +333,7 @@ define_machine(powernv) { #ifdef CONFIG_KEXEC .kexec_cpu_down = pnv_kexec_cpu_down, #endif +#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE + .memory_block_size = pnv_memory_block_size, +#endif }; diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index bf5fcd452168..0062a43a2e0d 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -31,6 +31,7 @@ #include <asm/xics.h> #include <asm/opal.h> #include <asm/runlatch.h> +#include <asm/code-patching.h> #include "powernv.h" @@ -50,8 +51,8 @@ static void pnv_smp_setup_cpu(int cpu) int pnv_smp_kick_cpu(int nr) { unsigned int pcpu = get_hard_smp_processor_id(nr); - unsigned long start_here = __pa(*((unsigned long *) - generic_secondary_smp_init)); + unsigned long start_here = + __pa(ppc_function_entry(generic_secondary_smp_init)); long rc; BUG_ON(nr < 0 || nr >= NR_CPUS); @@ -158,17 +159,19 @@ static void pnv_smp_cpu_kill_self(void) mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1); while (!generic_check_cpu_restart(cpu)) { ppc64_runlatch_off(); - power7_nap(); + power7_nap(1); ppc64_runlatch_on(); - if (!generic_check_cpu_restart(cpu)) { + + /* Reenable IRQs briefly to clear the IPI that woke us */ + local_irq_enable(); + local_irq_disable(); + mb(); + + if (cpu_core_split_required()) + continue; + + if (!generic_check_cpu_restart(cpu)) DBG("CPU%d Unexpected exit while offline !\n", cpu); - /* We may be getting an IPI, so we re-enable - * interrupts to process it, it will be ignored - * since we aren't online (hopefully) - */ - local_irq_enable(); - local_irq_disable(); - } } mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1); DBG("CPU%d coming online...\n", cpu); diff --git a/arch/powerpc/platforms/powernv/subcore-asm.S b/arch/powerpc/platforms/powernv/subcore-asm.S new file mode 100644 index 000000000000..39bb24aa8f34 --- /dev/null +++ b/arch/powerpc/platforms/powernv/subcore-asm.S @@ -0,0 +1,95 @@ +/* + * Copyright 2013, Michael (Ellerman|Neuling), IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/asm-offsets.h> +#include <asm/ppc_asm.h> +#include <asm/reg.h> + +#include "subcore.h" + + +_GLOBAL(split_core_secondary_loop) + /* + * r3 = u8 *state, used throughout the routine + * r4 = temp + * r5 = temp + * .. + * r12 = MSR + */ + mfmsr r12 + + /* Disable interrupts so SRR0/1 don't get trashed */ + li r4,0 + ori r4,r4,MSR_EE|MSR_SE|MSR_BE|MSR_RI + andc r4,r12,r4 + sync + mtmsrd r4 + + /* Switch to real mode and leave interrupts off */ + li r5, MSR_IR|MSR_DR + andc r5, r4, r5 + + LOAD_REG_ADDR(r4, real_mode) + + mtspr SPRN_SRR0,r4 + mtspr SPRN_SRR1,r5 + rfid + b . /* prevent speculative execution */ + +real_mode: + /* Grab values from unsplit SPRs */ + mfspr r6, SPRN_LDBAR + mfspr r7, SPRN_PMMAR + mfspr r8, SPRN_PMCR + mfspr r9, SPRN_RPR + mfspr r10, SPRN_SDR1 + + /* Order reading the SPRs vs telling the primary we are ready to split */ + sync + + /* Tell thread 0 we are in real mode */ + li r4, SYNC_STEP_REAL_MODE + stb r4, 0(r3) + + li r5, (HID0_POWER8_4LPARMODE | HID0_POWER8_2LPARMODE)@highest + sldi r5, r5, 48 + + /* Loop until we see the split happen in HID0 */ +1: mfspr r4, SPRN_HID0 + and. r4, r4, r5 + beq 1b + + /* + * We only need to initialise the below regs once for each subcore, + * but it's simpler and harmless to do it on each thread. + */ + + /* Make sure various SPRS have sane values */ + li r4, 0 + mtspr SPRN_LPID, r4 + mtspr SPRN_PCR, r4 + mtspr SPRN_HDEC, r4 + + /* Restore SPR values now we are split */ + mtspr SPRN_LDBAR, r6 + mtspr SPRN_PMMAR, r7 + mtspr SPRN_PMCR, r8 + mtspr SPRN_RPR, r9 + mtspr SPRN_SDR1, r10 + + LOAD_REG_ADDR(r5, virtual_mode) + + /* Get out of real mode */ + mtspr SPRN_SRR0,r5 + mtspr SPRN_SRR1,r12 + rfid + b . /* prevent speculative execution */ + +virtual_mode: + blr diff --git a/arch/powerpc/platforms/powernv/subcore.c b/arch/powerpc/platforms/powernv/subcore.c new file mode 100644 index 000000000000..894ecb3eb596 --- /dev/null +++ b/arch/powerpc/platforms/powernv/subcore.c @@ -0,0 +1,392 @@ +/* + * Copyright 2013, Michael (Ellerman|Neuling), IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define pr_fmt(fmt) "powernv: " fmt + +#include <linux/kernel.h> +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/device.h> +#include <linux/gfp.h> +#include <linux/smp.h> +#include <linux/stop_machine.h> + +#include <asm/cputhreads.h> +#include <asm/kvm_ppc.h> +#include <asm/machdep.h> +#include <asm/opal.h> +#include <asm/smp.h> + +#include "subcore.h" + + +/* + * Split/unsplit procedure: + * + * A core can be in one of three states, unsplit, 2-way split, and 4-way split. + * + * The mapping to subcores_per_core is simple: + * + * State | subcores_per_core + * ------------|------------------ + * Unsplit | 1 + * 2-way split | 2 + * 4-way split | 4 + * + * The core is split along thread boundaries, the mapping between subcores and + * threads is as follows: + * + * Unsplit: + * ---------------------------- + * Subcore | 0 | + * ---------------------------- + * Thread | 0 1 2 3 4 5 6 7 | + * ---------------------------- + * + * 2-way split: + * ------------------------------------- + * Subcore | 0 | 1 | + * ------------------------------------- + * Thread | 0 1 2 3 | 4 5 6 7 | + * ------------------------------------- + * + * 4-way split: + * ----------------------------------------- + * Subcore | 0 | 1 | 2 | 3 | + * ----------------------------------------- + * Thread | 0 1 | 2 3 | 4 5 | 6 7 | + * ----------------------------------------- + * + * + * Transitions + * ----------- + * + * It is not possible to transition between either of the split states, the + * core must first be unsplit. The legal transitions are: + * + * ----------- --------------- + * | | <----> | 2-way split | + * | | --------------- + * | Unsplit | + * | | --------------- + * | | <----> | 4-way split | + * ----------- --------------- + * + * Unsplitting + * ----------- + * + * Unsplitting is the simpler procedure. It requires thread 0 to request the + * unsplit while all other threads NAP. + * + * Thread 0 clears HID0_POWER8_DYNLPARDIS (Dynamic LPAR Disable). This tells + * the hardware that if all threads except 0 are napping, the hardware should + * unsplit the core. + * + * Non-zero threads are sent to a NAP loop, they don't exit the loop until they + * see the core unsplit. + * + * Core 0 spins waiting for the hardware to see all the other threads napping + * and perform the unsplit. + * + * Once thread 0 sees the unsplit, it IPIs the secondary threads to wake them + * out of NAP. They will then see the core unsplit and exit the NAP loop. + * + * Splitting + * --------- + * + * The basic splitting procedure is fairly straight forward. However it is + * complicated by the fact that after the split occurs, the newly created + * subcores are not in a fully initialised state. + * + * Most notably the subcores do not have the correct value for SDR1, which + * means they must not be running in virtual mode when the split occurs. The + * subcores have separate timebases SPRs but these are pre-synchronised by + * opal. + * + * To begin with secondary threads are sent to an assembly routine. There they + * switch to real mode, so they are immune to the uninitialised SDR1 value. + * Once in real mode they indicate that they are in real mode, and spin waiting + * to see the core split. + * + * Thread 0 waits to see that all secondaries are in real mode, and then begins + * the splitting procedure. It firstly sets HID0_POWER8_DYNLPARDIS, which + * prevents the hardware from unsplitting. Then it sets the appropriate HID bit + * to request the split, and spins waiting to see that the split has happened. + * + * Concurrently the secondaries will notice the split. When they do they set up + * their SPRs, notably SDR1, and then they can return to virtual mode and exit + * the procedure. + */ + +/* Initialised at boot by subcore_init() */ +static int subcores_per_core; + +/* + * Used to communicate to offline cpus that we want them to pop out of the + * offline loop and do a split or unsplit. + * + * 0 - no split happening + * 1 - unsplit in progress + * 2 - split to 2 in progress + * 4 - split to 4 in progress + */ +static int new_split_mode; + +static cpumask_var_t cpu_offline_mask; + +struct split_state { + u8 step; + u8 master; +}; + +static DEFINE_PER_CPU(struct split_state, split_state); + +static void wait_for_sync_step(int step) +{ + int i, cpu = smp_processor_id(); + + for (i = cpu + 1; i < cpu + threads_per_core; i++) + while(per_cpu(split_state, i).step < step) + barrier(); + + /* Order the wait loop vs any subsequent loads/stores. */ + mb(); +} + +static void unsplit_core(void) +{ + u64 hid0, mask; + int i, cpu; + + mask = HID0_POWER8_2LPARMODE | HID0_POWER8_4LPARMODE; + + cpu = smp_processor_id(); + if (cpu_thread_in_core(cpu) != 0) { + while (mfspr(SPRN_HID0) & mask) + power7_nap(0); + + per_cpu(split_state, cpu).step = SYNC_STEP_UNSPLIT; + return; + } + + hid0 = mfspr(SPRN_HID0); + hid0 &= ~HID0_POWER8_DYNLPARDIS; + mtspr(SPRN_HID0, hid0); + + while (mfspr(SPRN_HID0) & mask) + cpu_relax(); + + /* Wake secondaries out of NAP */ + for (i = cpu + 1; i < cpu + threads_per_core; i++) + smp_send_reschedule(i); + + wait_for_sync_step(SYNC_STEP_UNSPLIT); +} + +static void split_core(int new_mode) +{ + struct { u64 value; u64 mask; } split_parms[2] = { + { HID0_POWER8_1TO2LPAR, HID0_POWER8_2LPARMODE }, + { HID0_POWER8_1TO4LPAR, HID0_POWER8_4LPARMODE } + }; + int i, cpu; + u64 hid0; + + /* Convert new_mode (2 or 4) into an index into our parms array */ + i = (new_mode >> 1) - 1; + BUG_ON(i < 0 || i > 1); + + cpu = smp_processor_id(); + if (cpu_thread_in_core(cpu) != 0) { + split_core_secondary_loop(&per_cpu(split_state, cpu).step); + return; + } + + wait_for_sync_step(SYNC_STEP_REAL_MODE); + + /* Write new mode */ + hid0 = mfspr(SPRN_HID0); + hid0 |= HID0_POWER8_DYNLPARDIS | split_parms[i].value; + mtspr(SPRN_HID0, hid0); + + /* Wait for it to happen */ + while (!(mfspr(SPRN_HID0) & split_parms[i].mask)) + cpu_relax(); +} + +static void cpu_do_split(int new_mode) +{ + /* + * At boot subcores_per_core will be 0, so we will always unsplit at + * boot. In the usual case where the core is already unsplit it's a + * nop, and this just ensures the kernel's notion of the mode is + * consistent with the hardware. + */ + if (subcores_per_core != 1) + unsplit_core(); + + if (new_mode != 1) + split_core(new_mode); + + mb(); + per_cpu(split_state, smp_processor_id()).step = SYNC_STEP_FINISHED; +} + +bool cpu_core_split_required(void) +{ + smp_rmb(); + + if (!new_split_mode) + return false; + + cpu_do_split(new_split_mode); + + return true; +} + +static int cpu_update_split_mode(void *data) +{ + int cpu, new_mode = *(int *)data; + + if (this_cpu_ptr(&split_state)->master) { + new_split_mode = new_mode; + smp_wmb(); + + cpumask_andnot(cpu_offline_mask, cpu_present_mask, + cpu_online_mask); + + /* This should work even though the cpu is offline */ + for_each_cpu(cpu, cpu_offline_mask) + smp_send_reschedule(cpu); + } + + cpu_do_split(new_mode); + + if (this_cpu_ptr(&split_state)->master) { + /* Wait for all cpus to finish before we touch subcores_per_core */ + for_each_present_cpu(cpu) { + if (cpu >= setup_max_cpus) + break; + + while(per_cpu(split_state, cpu).step < SYNC_STEP_FINISHED) + barrier(); + } + + new_split_mode = 0; + + /* Make the new mode public */ + subcores_per_core = new_mode; + threads_per_subcore = threads_per_core / subcores_per_core; + + /* Make sure the new mode is written before we exit */ + mb(); + } + + return 0; +} + +static int set_subcores_per_core(int new_mode) +{ + struct split_state *state; + int cpu; + + if (kvm_hv_mode_active()) { + pr_err("Unable to change split core mode while KVM active.\n"); + return -EBUSY; + } + + /* + * We are only called at boot, or from the sysfs write. If that ever + * changes we'll need a lock here. + */ + BUG_ON(new_mode < 1 || new_mode > 4 || new_mode == 3); + + for_each_present_cpu(cpu) { + state = &per_cpu(split_state, cpu); + state->step = SYNC_STEP_INITIAL; + state->master = 0; + } + + get_online_cpus(); + + /* This cpu will update the globals before exiting stop machine */ + this_cpu_ptr(&split_state)->master = 1; + + /* Ensure state is consistent before we call the other cpus */ + mb(); + + stop_machine(cpu_update_split_mode, &new_mode, cpu_online_mask); + + put_online_cpus(); + + return 0; +} + +static ssize_t __used store_subcores_per_core(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + unsigned long val; + int rc; + + /* We are serialised by the attribute lock */ + + rc = sscanf(buf, "%lx", &val); + if (rc != 1) + return -EINVAL; + + switch (val) { + case 1: + case 2: + case 4: + if (subcores_per_core == val) + /* Nothing to do */ + goto out; + break; + default: + return -EINVAL; + } + + rc = set_subcores_per_core(val); + if (rc) + return rc; + +out: + return count; +} + +static ssize_t show_subcores_per_core(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%x\n", subcores_per_core); +} + +static DEVICE_ATTR(subcores_per_core, 0644, + show_subcores_per_core, store_subcores_per_core); + +static int subcore_init(void) +{ + if (!cpu_has_feature(CPU_FTR_ARCH_207S)) + return 0; + + /* + * We need all threads in a core to be present to split/unsplit so + * continue only if max_cpus are aligned to threads_per_core. + */ + if (setup_max_cpus % threads_per_core) + return 0; + + BUG_ON(!alloc_cpumask_var(&cpu_offline_mask, GFP_KERNEL)); + + set_subcores_per_core(1); + + return device_create_file(cpu_subsys.dev_root, + &dev_attr_subcores_per_core); +} +machine_device_initcall(powernv, subcore_init); diff --git a/arch/powerpc/platforms/powernv/subcore.h b/arch/powerpc/platforms/powernv/subcore.h new file mode 100644 index 000000000000..148abc91debf --- /dev/null +++ b/arch/powerpc/platforms/powernv/subcore.h @@ -0,0 +1,18 @@ +/* + * Copyright 2013, Michael Ellerman, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* These are ordered and tested with <= */ +#define SYNC_STEP_INITIAL 0 +#define SYNC_STEP_UNSPLIT 1 /* Set by secondary when it sees unsplit */ +#define SYNC_STEP_REAL_MODE 2 /* Set by secondary when in real mode */ +#define SYNC_STEP_FINISHED 3 /* Set by secondary when split/unsplit is done */ + +#ifndef __ASSEMBLY__ +void split_core_secondary_loop(u8 *state); +#endif diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index 8a8f0472d98f..0bec0c02c5e7 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -175,6 +175,36 @@ static int pseries_eeh_find_cap(struct device_node *dn, int cap) return 0; } +static int pseries_eeh_find_ecap(struct device_node *dn, int cap) +{ + struct pci_dn *pdn = PCI_DN(dn); + struct eeh_dev *edev = of_node_to_eeh_dev(dn); + u32 header; + int pos = 256; + int ttl = (4096 - 256) / 8; + + if (!edev || !edev->pcie_cap) + return 0; + if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL) + return 0; + else if (!header) + return 0; + + while (ttl-- > 0) { + if (PCI_EXT_CAP_ID(header) == cap && pos) + return pos; + + pos = PCI_EXT_CAP_NEXT(header); + if (pos < 256) + break; + + if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL) + break; + } + + return 0; +} + /** * pseries_eeh_of_probe - EEH probe on the given device * @dn: OF node @@ -220,7 +250,9 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag) * or PCIe switch downstream port. */ edev->class_code = class_code; + edev->pcix_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_PCIX); edev->pcie_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_EXP); + edev->aer_cap = pseries_eeh_find_ecap(dn, PCI_EXT_CAP_ID_ERR); edev->mode &= 0xFFFFFF00; if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) { edev->mode |= EEH_DEV_BRIDGE; @@ -464,6 +496,7 @@ static int pseries_eeh_get_state(struct eeh_pe *pe, int *state) } else { result = EEH_STATE_NOT_SUPPORT; } + break; default: result = EEH_STATE_NOT_SUPPORT; } @@ -499,11 +532,19 @@ static int pseries_eeh_reset(struct eeh_pe *pe, int option) /* If fundamental-reset not supported, try hot-reset */ if (option == EEH_RESET_FUNDAMENTAL && ret == -8) { + option = EEH_RESET_HOT; ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL, config_addr, BUID_HI(pe->phb->buid), - BUID_LO(pe->phb->buid), EEH_RESET_HOT); + BUID_LO(pe->phb->buid), option); } + /* We need reset hold or settlement delay */ + if (option == EEH_RESET_FUNDAMENTAL || + option == EEH_RESET_HOT) + msleep(EEH_PE_RST_HOLD_TIME); + else + msleep(EEH_PE_RST_SETTLE_TIME); + return ret; } diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index 7f75c94af822..7995135170a3 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -21,7 +21,7 @@ #include <asm/prom.h> #include <asm/sparsemem.h> -static unsigned long get_memblock_size(void) +unsigned long pseries_memory_block_size(void) { struct device_node *np; unsigned int memblock_size = MIN_MEMORY_BLOCK_SIZE; @@ -64,17 +64,6 @@ static unsigned long get_memblock_size(void) return memblock_size; } -/* WARNING: This is going to override the generic definition whenever - * pseries is built-in regardless of what platform is active at boot - * time. This is fine for now as this is the only "option" and it - * should work everywhere. If not, we'll have to turn this into a - * ppc_md. callback - */ -unsigned long memory_block_size_bytes(void) -{ - return get_memblock_size(); -} - #ifdef CONFIG_MEMORY_HOTREMOVE static int pseries_remove_memory(u64 start, u64 size) { @@ -105,7 +94,7 @@ static int pseries_remove_memblock(unsigned long base, unsigned int memblock_siz if (!pfn_valid(start_pfn)) goto out; - block_sz = memory_block_size_bytes(); + block_sz = pseries_memory_block_size(); sections_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE; nid = memory_add_physaddr_to_nid(base); @@ -201,7 +190,7 @@ static int pseries_update_drconf_memory(struct of_prop_reconfig *pr) u32 *p; int i, rc = -EINVAL; - memblock_size = get_memblock_size(); + memblock_size = pseries_memory_block_size(); if (!memblock_size) return -EINVAL; diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S index 444fe7759e55..99ecf0a5a929 100644 --- a/arch/powerpc/platforms/pseries/hvCall.S +++ b/arch/powerpc/platforms/pseries/hvCall.S @@ -49,7 +49,7 @@ END_FTR_SECTION(0, 1); \ std r0,16(r1); \ addi r4,r1,STK_PARAM(FIRST_REG); \ stdu r1,-STACK_FRAME_OVERHEAD(r1); \ - bl .__trace_hcall_entry; \ + bl __trace_hcall_entry; \ addi r1,r1,STACK_FRAME_OVERHEAD; \ ld r0,16(r1); \ ld r3,STK_PARAM(R3)(r1); \ @@ -83,7 +83,7 @@ END_FTR_SECTION(0, 1); \ mr r3,r6; \ std r0,16(r1); \ stdu r1,-STACK_FRAME_OVERHEAD(r1); \ - bl .__trace_hcall_exit; \ + bl __trace_hcall_exit; \ addi r1,r1,STACK_FRAME_OVERHEAD; \ ld r0,16(r1); \ ld r3,STK_PARAM(R3)(r1); \ @@ -106,7 +106,7 @@ END_FTR_SECTION(0, 1); \ .text -_GLOBAL(plpar_hcall_norets) +_GLOBAL_TOC(plpar_hcall_norets) HMT_MEDIUM mfcr r0 @@ -122,7 +122,7 @@ _GLOBAL(plpar_hcall_norets) mtcrf 0xff,r0 blr /* return r3 = status */ -_GLOBAL(plpar_hcall) +_GLOBAL_TOC(plpar_hcall) HMT_MEDIUM mfcr r0 @@ -188,7 +188,7 @@ _GLOBAL(plpar_hcall_raw) blr /* return r3 = status */ -_GLOBAL(plpar_hcall9) +_GLOBAL_TOC(plpar_hcall9) HMT_MEDIUM mfcr r0 diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 99219530ea4a..361add62abf1 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -64,4 +64,6 @@ extern int dlpar_detach_node(struct device_node *); struct pci_host_bridge; int pseries_root_bridge_prepare(struct pci_host_bridge *bridge); +unsigned long pseries_memory_block_size(void); + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 099d2df976a2..f2f40e64658f 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -510,7 +510,11 @@ static void __init pSeries_setup_arch(void) static int __init pSeries_init_panel(void) { /* Manually leave the kernel version on the panel. */ +#ifdef __BIG_ENDIAN__ ppc_md.progress("Linux ppc64\n", 0); +#else + ppc_md.progress("Linux ppc64le\n", 0); +#endif ppc_md.progress(init_utsname()->version, 0); return 0; @@ -806,4 +810,7 @@ define_machine(pseries) { #ifdef CONFIG_KEXEC .machine_kexec = pSeries_machine_kexec, #endif +#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE + .memory_block_size = pseries_memory_block_size, +#endif }; diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 24f58cb0a543..a3555b10c1a5 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -44,6 +44,7 @@ #include <asm/xics.h> #include <asm/dbell.h> #include <asm/plpar_wrappers.h> +#include <asm/code-patching.h> #include "pseries.h" #include "offline_states.h" @@ -96,8 +97,8 @@ int smp_query_cpu_stopped(unsigned int pcpu) static inline int smp_startup_cpu(unsigned int lcpu) { int status; - unsigned long start_here = __pa((u32)*((unsigned long *) - generic_secondary_smp_init)); + unsigned long start_here = + __pa(ppc_function_entry(generic_secondary_smp_init)); unsigned int pcpu; int start_cpu; diff --git a/arch/powerpc/platforms/wsp/scom_smp.c b/arch/powerpc/platforms/wsp/scom_smp.c index 268bc899c1f7..8c79ce016cf1 100644 --- a/arch/powerpc/platforms/wsp/scom_smp.c +++ b/arch/powerpc/platforms/wsp/scom_smp.c @@ -20,6 +20,7 @@ #include <asm/reg_a2.h> #include <asm/scom.h> #include <asm/udbg.h> +#include <asm/code-patching.h> #include "wsp.h" @@ -405,7 +406,7 @@ int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx, struct device_node *np) goto fail; } - start_here = *(unsigned long *)(core_setup ? generic_secondary_smp_init + start_here = ppc_function_entry(core_setup ? generic_secondary_smp_init : generic_secondary_thread_init); pr_devel("CPU%d entry point at 0x%lx...\n", lcpu, start_here); diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig index 7baa70d6dc01..a19332a38715 100644 --- a/arch/powerpc/sysdev/Kconfig +++ b/arch/powerpc/sysdev/Kconfig @@ -7,6 +7,12 @@ config PPC4xx_PCI_EXPRESS depends on PCI && 4xx default n +config PPC4xx_HSTA_MSI + bool + depends on PCI_MSI + depends on PCI && 4xx + default n + config PPC4xx_MSI bool depends on PCI_MSI diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index afbcc37aa094..f7cb2a1b01fa 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_4xx) += ppc4xx_pci.o endif +obj-$(CONFIG_PPC4xx_HSTA_MSI) += ppc4xx_hsta_msi.o obj-$(CONFIG_PPC4xx_MSI) += ppc4xx_msi.o obj-$(CONFIG_PPC4xx_CPM) += ppc4xx_cpm.o obj-$(CONFIG_PPC4xx_GPIO) += ppc4xx_gpio.o diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 3f415e252ea5..4bd091a05583 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -1150,8 +1150,7 @@ static int fsl_pci_pme_probe(struct pci_controller *hose) pci = hose->private_data; /* Enable PTOD, ENL23D & EXL23D */ - out_be32(&pci->pex_pme_mes_disr, 0); - setbits32(&pci->pex_pme_mes_disr, + clrbits32(&pci->pex_pme_mes_disr, PME_DISR_EN_PTOD | PME_DISR_EN_ENL23D | PME_DISR_EN_EXL23D); out_be32(&pci->pex_pme_mes_ier, 0); diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index cf2b0840a672..c04b718307c8 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -391,8 +391,10 @@ int fsl_rio_setup(struct platform_device *dev) ops->get_inb_message = fsl_get_inb_message; rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0); - if (!rmu_node) + if (!rmu_node) { + dev_err(&dev->dev, "No valid fsl,srio-rmu-handle property\n"); goto err_rmu; + } rc = of_address_to_resource(rmu_node, 0, &rmu_regs); if (rc) { dev_err(&dev->dev, "Can't get %s property 'reg'\n", @@ -413,6 +415,7 @@ int fsl_rio_setup(struct platform_device *dev) /*set up doobell node*/ np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit"); if (!np) { + dev_err(&dev->dev, "No fsl,srio-dbell-unit node\n"); rc = -ENODEV; goto err_dbell; } @@ -441,6 +444,7 @@ int fsl_rio_setup(struct platform_device *dev) /*set up port write node*/ np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit"); if (!np) { + dev_err(&dev->dev, "No fsl,srio-port-write-unit node\n"); rc = -ENODEV; goto err_pw; } @@ -633,14 +637,18 @@ int fsl_rio_setup(struct platform_device *dev) return 0; err: kfree(pw); + pw = NULL; err_pw: kfree(dbell); + dbell = NULL; err_dbell: iounmap(rmu_regs_win); + rmu_regs_win = NULL; err_rmu: kfree(ops); err_ops: iounmap(rio_regs_win); + rio_regs_win = NULL; err_rio_regs: return rc; } diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c index 00e224a1048c..b48197ae44d0 100644 --- a/arch/powerpc/sysdev/fsl_rmu.c +++ b/arch/powerpc/sysdev/fsl_rmu.c @@ -881,9 +881,9 @@ fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0, "msg_rx", (void *)mport); if (rc < 0) { - dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, - rmu->msg_tx_ring.virt_buffer[i], - rmu->msg_tx_ring.phys_buffer[i]); + dma_free_coherent(priv->dev, + rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE, + rmu->msg_rx_ring.virt, rmu->msg_rx_ring.phys); goto out; } diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 8209744b2829..be33c9768ea1 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1588,10 +1588,6 @@ void __init mpic_init(struct mpic *mpic) num_timers = 8; } - /* FSL mpic error interrupt intialization */ - if (mpic->flags & MPIC_FSL_HAS_EIMR) - mpic_err_int_init(mpic, MPIC_FSL_ERR_INT); - /* Initialize timers to our reserved vectors and mask them for now */ for (i = 0; i < num_timers; i++) { unsigned int offset = mpic_tm_offset(mpic, i); @@ -1675,6 +1671,10 @@ void __init mpic_init(struct mpic *mpic) irq_set_chained_handler(virq, &mpic_cascade); } } + + /* FSL mpic error interrupt intialization */ + if (mpic->flags & MPIC_FSL_HAS_EIMR) + mpic_err_int_init(mpic, MPIC_FSL_ERR_INT); } void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio) diff --git a/arch/powerpc/sysdev/ppc4xx_hsta_msi.c b/arch/powerpc/sysdev/ppc4xx_hsta_msi.c new file mode 100644 index 000000000000..11c888416f0a --- /dev/null +++ b/arch/powerpc/sysdev/ppc4xx_hsta_msi.c @@ -0,0 +1,215 @@ +/* + * MSI support for PPC4xx SoCs using High Speed Transfer Assist (HSTA) for + * generation of the interrupt. + * + * Copyright © 2013 Alistair Popple <alistair@popple.id.au> IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/msi.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/pci.h> +#include <linux/semaphore.h> +#include <asm/msi_bitmap.h> + +struct ppc4xx_hsta_msi { + struct device *dev; + + /* The ioremapped HSTA MSI IO space */ + u32 __iomem *data; + + /* Physical address of HSTA MSI IO space */ + u64 address; + struct msi_bitmap bmp; + + /* An array mapping offsets to hardware IRQs */ + int *irq_map; + + /* Number of hwirqs supported */ + int irq_count; +}; +static struct ppc4xx_hsta_msi ppc4xx_hsta_msi; + +static int hsta_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +{ + struct msi_msg msg; + struct msi_desc *entry; + int irq, hwirq; + u64 addr; + + list_for_each_entry(entry, &dev->msi_list, list) { + irq = msi_bitmap_alloc_hwirqs(&ppc4xx_hsta_msi.bmp, 1); + if (irq < 0) { + pr_debug("%s: Failed to allocate msi interrupt\n", + __func__); + return irq; + } + + hwirq = ppc4xx_hsta_msi.irq_map[irq]; + if (hwirq == NO_IRQ) { + pr_err("%s: Failed mapping irq %d\n", __func__, irq); + return -EINVAL; + } + + /* + * HSTA generates interrupts on writes to 128-bit aligned + * addresses. + */ + addr = ppc4xx_hsta_msi.address + irq*0x10; + msg.address_hi = upper_32_bits(addr); + msg.address_lo = lower_32_bits(addr); + + /* Data is not used by the HSTA. */ + msg.data = 0; + + pr_debug("%s: Setup irq %d (0x%0llx)\n", __func__, hwirq, + (((u64) msg.address_hi) << 32) | msg.address_lo); + + if (irq_set_msi_desc(hwirq, entry)) { + pr_err( + "%s: Invalid hwirq %d specified in device tree\n", + __func__, hwirq); + msi_bitmap_free_hwirqs(&ppc4xx_hsta_msi.bmp, irq, 1); + return -EINVAL; + } + write_msi_msg(hwirq, &msg); + } + + return 0; +} + +static int hsta_find_hwirq_offset(int hwirq) +{ + int irq; + + /* Find the offset given the hwirq */ + for (irq = 0; irq < ppc4xx_hsta_msi.irq_count; irq++) + if (ppc4xx_hsta_msi.irq_map[irq] == hwirq) + return irq; + + return -EINVAL; +} + +static void hsta_teardown_msi_irqs(struct pci_dev *dev) +{ + struct msi_desc *entry; + int irq; + + list_for_each_entry(entry, &dev->msi_list, list) { + if (entry->irq == NO_IRQ) + continue; + + irq = hsta_find_hwirq_offset(entry->irq); + + /* entry->irq should always be in irq_map */ + BUG_ON(irq < 0); + irq_set_msi_desc(entry->irq, NULL); + msi_bitmap_free_hwirqs(&ppc4xx_hsta_msi.bmp, irq, 1); + pr_debug("%s: Teardown IRQ %u (index %u)\n", __func__, + entry->irq, irq); + } +} + +static int hsta_msi_check_device(struct pci_dev *pdev, int nvec, int type) +{ + /* We don't support MSI-X */ + if (type == PCI_CAP_ID_MSIX) { + pr_debug("%s: MSI-X not supported.\n", __func__); + return -EINVAL; + } + + return 0; +} + +static int hsta_msi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *mem; + int irq, ret, irq_count; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (IS_ERR(mem)) { + dev_err(dev, "Unable to get mmio space\n"); + return -EINVAL; + } + + irq_count = of_irq_count(dev->of_node); + if (!irq_count) { + dev_err(dev, "Unable to find IRQ range\n"); + return -EINVAL; + } + + ppc4xx_hsta_msi.dev = dev; + ppc4xx_hsta_msi.address = mem->start; + ppc4xx_hsta_msi.data = ioremap(mem->start, resource_size(mem)); + ppc4xx_hsta_msi.irq_count = irq_count; + if (IS_ERR(ppc4xx_hsta_msi.data)) { + dev_err(dev, "Unable to map memory\n"); + return -ENOMEM; + } + + ret = msi_bitmap_alloc(&ppc4xx_hsta_msi.bmp, irq_count, dev->of_node); + if (ret) + goto out; + + ppc4xx_hsta_msi.irq_map = kmalloc(sizeof(int) * irq_count, GFP_KERNEL); + if (IS_ERR(ppc4xx_hsta_msi.irq_map)) { + ret = -ENOMEM; + goto out1; + } + + /* Setup a mapping from irq offsets to hardware irq numbers */ + for (irq = 0; irq < irq_count; irq++) { + ppc4xx_hsta_msi.irq_map[irq] = + irq_of_parse_and_map(dev->of_node, irq); + if (ppc4xx_hsta_msi.irq_map[irq] == NO_IRQ) { + dev_err(dev, "Unable to map IRQ\n"); + ret = -EINVAL; + goto out2; + } + } + + ppc_md.setup_msi_irqs = hsta_setup_msi_irqs; + ppc_md.teardown_msi_irqs = hsta_teardown_msi_irqs; + ppc_md.msi_check_device = hsta_msi_check_device; + return 0; + +out2: + kfree(ppc4xx_hsta_msi.irq_map); + +out1: + msi_bitmap_free(&ppc4xx_hsta_msi.bmp); + +out: + iounmap(ppc4xx_hsta_msi.data); + return ret; +} + +static const struct of_device_id hsta_msi_ids[] = { + { + .compatible = "ibm,hsta-msi", + }, + {} +}; + +static struct platform_driver hsta_msi_driver = { + .probe = hsta_msi_probe, + .driver = { + .name = "hsta-msi", + .owner = THIS_MODULE, + .of_match_table = hsta_msi_ids, + }, +}; + +static int hsta_msi_init(void) +{ + return platform_driver_register(&hsta_msi_driver); +} +subsys_initcall(hsta_msi_init); diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 4914fd3f41ec..df6e2fc4ff92 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -176,8 +176,12 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose, return -ENXIO; } - /* Check that we are fully contained within 32 bits space */ - if (res->end > 0xffffffff) { + /* Check that we are fully contained within 32 bits space if we are not + * running on a 460sx or 476fpe which have 64 bit bus addresses. + */ + if (res->end > 0xffffffff && + !(of_device_is_compatible(hose->dn, "ibm,plb-pciex-460sx") + || of_device_is_compatible(hose->dn, "ibm,plb-pciex-476fpe"))) { printk(KERN_ERR "%s: dma-ranges outside of 32 bits space\n", hose->dn->full_name); return -ENXIO; @@ -1440,7 +1444,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np) ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops; #endif #ifdef CONFIG_476FPE - if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe")) + if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe") + || of_device_is_compatible(np, "ibm,plb-pciex-476gtr")) ppc4xx_pciex_hwops = &ppc_476fpe_pcie_hwops; #endif if (ppc4xx_pciex_hwops == NULL) { @@ -1751,7 +1756,10 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port *port, dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT | DCRO_PEGPL_OMRxMSKL_VAL); - else if (of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe")) + else if (of_device_is_compatible( + port->node, "ibm,plb-pciex-476fpe") || + of_device_is_compatible( + port->node, "ibm,plb-pciex-476gtr")) dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | DCRO_PEGPL_476FPE_OMR1MSKL_UOT | DCRO_PEGPL_OMRxMSKL_VAL); @@ -1881,7 +1889,10 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port, sa |= PCI_BASE_ADDRESS_MEM_PREFETCH; if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") || - of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe")) + of_device_is_compatible( + port->node, "ibm,plb-pciex-476fpe") || + of_device_is_compatible( + port->node, "ibm,plb-pciex-476gtr")) sa |= PCI_BASE_ADDRESS_MEM_TYPE_64; out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa)); diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 08504e75b2c7..d199bfa2f1fa 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -419,7 +419,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi) get_output_lock(); excprint(regs); if (bp) { - printf("cpu 0x%x stopped at breakpoint 0x%x (", + printf("cpu 0x%x stopped at breakpoint 0x%lx (", cpu, BP_NUM(bp)); xmon_print_symbol(regs->nip, " ", ")\n"); } @@ -513,7 +513,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi) excprint(regs); bp = at_breakpoint(regs->nip); if (bp) { - printf("Stopped at breakpoint %x (", BP_NUM(bp)); + printf("Stopped at breakpoint %lx (", BP_NUM(bp)); xmon_print_symbol(regs->nip, " ", ")\n"); } if (unrecoverable_excp(regs)) @@ -759,7 +759,7 @@ static void insert_cpu_bpts(void) brk.address = dabr.address; brk.type = (dabr.enabled & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL; brk.len = 8; - set_breakpoint(&brk); + __set_breakpoint(&brk); } if (iabr && cpu_has_feature(CPU_FTR_IABR)) mtspr(SPRN_IABR, iabr->address @@ -997,14 +997,14 @@ static int cpu_cmd(void) last_cpu = cpu; } else { if (last_cpu != first_cpu) - printf("-%lx", last_cpu); + printf("-0x%lx", last_cpu); last_cpu = first_cpu = cpu; - printf(" %lx", cpu); + printf(" 0x%lx", cpu); } } } if (last_cpu != first_cpu) - printf("-%lx", last_cpu); + printf("-0x%lx", last_cpu); printf("\n"); return 0; } @@ -1024,7 +1024,7 @@ static int cpu_cmd(void) /* take control back */ mb(); xmon_owner = smp_processor_id(); - printf("cpu %u didn't take control\n", cpu); + printf("cpu 0x%x didn't take control\n", cpu); return 0; } barrier(); @@ -1086,7 +1086,7 @@ csum(void) fcs = 0xffff; for (i = 0; i < ncsum; ++i) { if (mread(adrs+i, &v, 1) == 0) { - printf("csum stopped at %x\n", adrs+i); + printf("csum stopped at "REG"\n", adrs+i); break; } fcs = FCS(fcs, v); @@ -1202,12 +1202,12 @@ bpt_cmds(void) /* assume a breakpoint address */ bp = at_breakpoint(a); if (bp == NULL) { - printf("No breakpoint at %x\n", a); + printf("No breakpoint at %lx\n", a); break; } } - printf("Cleared breakpoint %x (", BP_NUM(bp)); + printf("Cleared breakpoint %lx (", BP_NUM(bp)); xmon_print_symbol(bp->address, " ", ")\n"); bp->enabled = 0; break; @@ -1746,7 +1746,7 @@ mwrite(unsigned long adrs, void *buf, int size) __delay(200); n = size; } else { - printf("*** Error writing address %x\n", adrs + n); + printf("*** Error writing address "REG"\n", adrs + n); } catch_memory_errors = 0; return n; @@ -2435,7 +2435,7 @@ static void proccall(void) ret = func(args[0], args[1], args[2], args[3], args[4], args[5], args[6], args[7]); sync(); - printf("return value is %x\n", ret); + printf("return value is 0x%lx\n", ret); } else { printf("*** %x exception occurred\n", fault_except); } @@ -2700,7 +2700,7 @@ static void dump_slb(void) unsigned long esid,vsid,valid; unsigned long llp; - printf("SLB contents of cpu %x\n", smp_processor_id()); + printf("SLB contents of cpu 0x%x\n", smp_processor_id()); for (i = 0; i < mmu_slb_size; i++) { asm volatile("slbmfee %0,%1" : "=r" (esid) : "r" (i)); @@ -2732,7 +2732,7 @@ static void dump_stab(void) int i; unsigned long *tmp = (unsigned long *)local_paca->stab_addr; - printf("Segment table contents of cpu %x\n", smp_processor_id()); + printf("Segment table contents of cpu 0x%x\n", smp_processor_id()); for (i = 0; i < PAGE_SIZE/16; i++) { unsigned long a, b; diff --git a/drivers/macintosh/windfarm_pm121.c b/drivers/macintosh/windfarm_pm121.c index 7fe58b0ae8b4..b350fb86ff08 100644 --- a/drivers/macintosh/windfarm_pm121.c +++ b/drivers/macintosh/windfarm_pm121.c @@ -555,8 +555,18 @@ static void pm121_create_sys_fans(int loop_id) pid_param.interval = PM121_SYS_INTERVAL; pid_param.history_len = PM121_SYS_HISTORY_SIZE; pid_param.itarget = param->itarget; - pid_param.min = control->ops->get_min(control); - pid_param.max = control->ops->get_max(control); + if(control) + { + pid_param.min = control->ops->get_min(control); + pid_param.max = control->ops->get_max(control); + } else { + /* + * This is probably not the right!? + * Perhaps goto fail if control == NULL above? + */ + pid_param.min = 0; + pid_param.max = 0; + } wf_pid_init(&pm121_sys_state[loop_id]->pid, &pid_param); @@ -571,7 +581,7 @@ static void pm121_create_sys_fans(int loop_id) control the same control */ printk(KERN_WARNING "pm121: failed to set up %s loop " "setting \"%s\" to max speed.\n", - loop_names[loop_id], control->name); + loop_names[loop_id], control ? control->name : "uninitialized value"); if (control) wf_control_set_max(control); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 436a76ab4bb1..212c63d780e7 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3179,14 +3179,7 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) return 0; } -/** - * pci_reset_bridge_secondary_bus - Reset the secondary bus on a PCI bridge. - * @dev: Bridge device - * - * Use the bridge control register to assert reset on the secondary bus. - * Devices on the secondary bus are left in power-on state. - */ -void pci_reset_bridge_secondary_bus(struct pci_dev *dev) +void __weak pcibios_reset_secondary_bus(struct pci_dev *dev) { u16 ctrl; @@ -3211,6 +3204,18 @@ void pci_reset_bridge_secondary_bus(struct pci_dev *dev) */ ssleep(1); } + +/** + * pci_reset_bridge_secondary_bus - Reset the secondary bus on a PCI bridge. + * @dev: Bridge device + * + * Use the bridge control register to assert reset on the secondary bus. + * Devices on the secondary bus are left in power-on state. + */ +void pci_reset_bridge_secondary_bus(struct pci_dev *dev) +{ + pcibios_reset_secondary_bus(dev); +} EXPORT_SYMBOL_GPL(pci_reset_bridge_secondary_bus); static int pci_parent_bus_reset(struct pci_dev *dev, int probe) diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile index 316194f26ff4..b3dbe9ef1a40 100644 --- a/tools/testing/selftests/powerpc/Makefile +++ b/tools/testing/selftests/powerpc/Makefile @@ -13,7 +13,7 @@ CFLAGS := -Wall -O2 -flto -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CUR export CC CFLAGS -TARGETS = pmu copyloops +TARGETS = pmu copyloops mm endif diff --git a/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h b/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h index ccd9c84c4e3f..d1dc37425510 100644 --- a/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h +++ b/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h @@ -46,12 +46,15 @@ #define R20 r20 #define R21 r21 #define R22 r22 +#define R29 r29 +#define R30 r30 +#define R31 r31 #define STACKFRAMESIZE 256 -#define STK_PARAM(i) (48 + ((i)-3)*8) #define STK_REG(i) (112 + ((i)-14)*8) #define _GLOBAL(A) FUNC_START(test_ ## A) +#define _GLOBAL_TOC(A) _GLOBAL(A) #define PPC_MTOCRF(A, B) mtocrf A, B diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile new file mode 100644 index 000000000000..357ccbd6bad9 --- /dev/null +++ b/tools/testing/selftests/powerpc/mm/Makefile @@ -0,0 +1,18 @@ +noarg: + $(MAKE) -C ../ + +PROGS := hugetlb_vs_thp_test + +all: $(PROGS) + +$(PROGS): ../harness.c + +run_tests: all + @-for PROG in $(PROGS); do \ + ./$$PROG; \ + done; + +clean: + rm -f $(PROGS) + +.PHONY: all run_tests clean diff --git a/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c b/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c new file mode 100644 index 000000000000..3d8e5b033e1d --- /dev/null +++ b/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c @@ -0,0 +1,72 @@ +#include <stdio.h> +#include <sys/mman.h> +#include <unistd.h> + +#include "utils.h" + +/* This must match the huge page & THP size */ +#define SIZE (16 * 1024 * 1024) + +static int test_body(void) +{ + void *addr; + char *p; + + addr = (void *)0xa0000000; + + p = mmap(addr, SIZE, PROT_READ | PROT_WRITE, + MAP_HUGETLB | MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); + if (p != MAP_FAILED) { + /* + * Typically the mmap will fail because no huge pages are + * allocated on the system. But if there are huge pages + * allocated the mmap will succeed. That's fine too, we just + * munmap here before continuing. + */ + munmap(addr, SIZE); + } + + p = mmap(addr, SIZE, PROT_READ | PROT_WRITE, + MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); + if (p == MAP_FAILED) { + printf("Mapping failed @ %p\n", addr); + perror("mmap"); + return 1; + } + + /* + * Either a user or kernel access is sufficient to trigger the bug. + * A kernel access is easier to spot & debug, as it will trigger the + * softlockup or RCU stall detectors, and when the system is kicked + * into xmon we get a backtrace in the kernel. + * + * A good option is: + * getcwd(p, SIZE); + * + * For the purposes of this testcase it's preferable to spin in + * userspace, so the harness can kill us if we get stuck. That way we + * see a test failure rather than a dead system. + */ + *p = 0xf; + + munmap(addr, SIZE); + + return 0; +} + +static int test_main(void) +{ + int i; + + /* 10,000 because it's a "bunch", and completes reasonably quickly */ + for (i = 0; i < 10000; i++) + if (test_body()) + return 1; + + return 0; +} + +int main(void) +{ + return test_harness(test_main, "hugetlb_vs_thp"); +} |
