diff options
253 files changed, 16905 insertions, 7306 deletions
diff --git a/Documentation/devicetree/bindings/bus/ti-gpmc.txt b/Documentation/devicetree/bindings/bus/ti-gpmc.txt index 5ddb2e9efaaa..4b87ea1194e3 100644 --- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt +++ b/Documentation/devicetree/bindings/bus/ti-gpmc.txt @@ -35,36 +35,83 @@ Required properties: Timing properties for child nodes. All are optional and default to 0. - - gpmc,sync-clk: Minimum clock period for synchronous mode, in picoseconds - - Chip-select signal timings corresponding to GPMC_CONFIG2: - - gpmc,cs-on: Assertion time - - gpmc,cs-rd-off: Read deassertion time - - gpmc,cs-wr-off: Write deassertion time - - ADV signal timings corresponding to GPMC_CONFIG3: - - gpmc,adv-on: Assertion time - - gpmc,adv-rd-off: Read deassertion time - - gpmc,adv-wr-off: Write deassertion time - - WE signals timings corresponding to GPMC_CONFIG4: - - gpmc,we-on: Assertion time - - gpmc,we-off: Deassertion time - - OE signals timings corresponding to GPMC_CONFIG4: - - gpmc,oe-on: Assertion time - - gpmc,oe-off: Deassertion time - - Access time and cycle time timings corresponding to GPMC_CONFIG5: - - gpmc,page-burst-access: Multiple access word delay - - gpmc,access: Start-cycle to first data valid delay - - gpmc,rd-cycle: Total read cycle time - - gpmc,wr-cycle: Total write cycle time + - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds + + Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2: + - gpmc,cs-on-ns: Assertion time + - gpmc,cs-rd-off-ns: Read deassertion time + - gpmc,cs-wr-off-ns: Write deassertion time + + ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3: + - gpmc,adv-on-ns: Assertion time + - gpmc,adv-rd-off-ns: Read deassertion time + - gpmc,adv-wr-off-ns: Write deassertion time + + WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: + - gpmc,we-on-ns Assertion time + - gpmc,we-off-ns: Deassertion time + + OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: + - gpmc,oe-on-ns: Assertion time + - gpmc,oe-off-ns: Deassertion time + + Access time and cycle time timings (in nanoseconds) corresponding to + GPMC_CONFIG5: + - gpmc,page-burst-access-ns: Multiple access word delay + - gpmc,access-ns: Start-cycle to first data valid delay + - gpmc,rd-cycle-ns: Total read cycle time + - gpmc,wr-cycle-ns: Total write cycle time + - gpmc,bus-turnaround-ns: Turn-around time between successive accesses + - gpmc,cycle2cycle-delay-ns: Delay between chip-select pulses + - gpmc,clk-activation-ns: GPMC clock activation time + - gpmc,wait-monitoring-ns: Start of wait monitoring with regard to valid + data + +Boolean timing parameters. If property is present parameter enabled and +disabled if omitted: + - gpmc,adv-extra-delay: ADV signal is delayed by half GPMC clock + - gpmc,cs-extra-delay: CS signal is delayed by half GPMC clock + - gpmc,cycle2cycle-diffcsen: Add "cycle2cycle-delay" between successive + accesses to a different CS + - gpmc,cycle2cycle-samecsen: Add "cycle2cycle-delay" between successive + accesses to the same CS + - gpmc,oe-extra-delay: OE signal is delayed by half GPMC clock + - gpmc,we-extra-delay: WE signal is delayed by half GPMC clock + - gpmc,time-para-granularity: Multiply all access times by 2 The following are only applicable to OMAP3+ and AM335x: - - gpmc,wr-access - - gpmc,wr-data-mux-bus - + - gpmc,wr-access-ns: In synchronous write mode, for single or + burst accesses, defines the number of + GPMC_FCLK cycles from start access time + to the GPMC_CLK rising edge used by the + memory device for the first data capture. + - gpmc,wr-data-mux-bus-ns: In address-data multiplex mode, specifies + the time when the first data is driven on + the address-data bus. + +GPMC chip-select settings properties for child nodes. All are optional. + +- gpmc,burst-length Page/burst length. Must be 4, 8 or 16. +- gpmc,burst-wrap Enables wrap bursting +- gpmc,burst-read Enables read page/burst mode +- gpmc,burst-write Enables write page/burst mode +- gpmc,device-nand Device is NAND +- gpmc,device-width Total width of device(s) connected to a GPMC + chip-select in bytes. The GPMC supports 8-bit + and 16-bit devices and so this property must be + 1 or 2. +- gpmc,mux-add-data Address and data multiplexing configuration. + Valid values are 1 for address-address-data + multiplexing mode and 2 for address-data + multiplexing mode. +- gpmc,sync-read Enables synchronous read. Defaults to asynchronous + is this is not set. +- gpmc,sync-write Enables synchronous writes. Defaults to asynchronous + is this is not set. +- gpmc,wait-pin Wait-pin used by client. Must be less than + "gpmc,num-waitpins". +- gpmc,wait-on-read Enables wait monitoring on reads. +- gpmc,wait-on-write Enables wait monitoring on writes. Example for an AM33xx board: diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt new file mode 100644 index 000000000000..ea5e26f16aec --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -0,0 +1,288 @@ +* Samsung Exynos4 Clock Controller + +The Exynos4 clock controller generates and supplies clock to various controllers +within the Exynos4 SoC. The clock binding described here is applicable to all +SoC's in the Exynos4 family. + +Required Properties: + +- comptible: should be one of the following. + - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC. + - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +The following is the list of clocks generated by the controller. Each clock is +assigned an identifier and client nodes use this identifier to specify the +clock which they consume. Some of the clocks are available only on a particular +Exynos4 SoC and this is specified where applicable. + + + [Core Clocks] + + Clock ID SoC (if specific) + ----------------------------------------------- + + xxti 1 + xusbxti 2 + fin_pll 3 + fout_apll 4 + fout_mpll 5 + fout_epll 6 + fout_vpll 7 + sclk_apll 8 + sclk_mpll 9 + sclk_epll 10 + sclk_vpll 11 + arm_clk 12 + aclk200 13 + aclk100 14 + aclk160 15 + aclk133 16 + mout_mpll_user_t 17 Exynos4x12 + mout_mpll_user_c 18 Exynos4x12 + mout_core 19 + mout_apll 20 + + + [Clock Gate for Special Clocks] + + Clock ID SoC (if specific) + ----------------------------------------------- + + sclk_fimc0 128 + sclk_fimc1 129 + sclk_fimc2 130 + sclk_fimc3 131 + sclk_cam0 132 + sclk_cam1 133 + sclk_csis0 134 + sclk_csis1 135 + sclk_hdmi 136 + sclk_mixer 137 + sclk_dac 138 + sclk_pixel 139 + sclk_fimd0 140 + sclk_mdnie0 141 Exynos4412 + sclk_mdnie_pwm0 12 142 Exynos4412 + sclk_mipi0 143 + sclk_audio0 144 + sclk_mmc0 145 + sclk_mmc1 146 + sclk_mmc2 147 + sclk_mmc3 148 + sclk_mmc4 149 + sclk_sata 150 Exynos4210 + sclk_uart0 151 + sclk_uart1 152 + sclk_uart2 153 + sclk_uart3 154 + sclk_uart4 155 + sclk_audio1 156 + sclk_audio2 157 + sclk_spdif 158 + sclk_spi0 159 + sclk_spi1 160 + sclk_spi2 161 + sclk_slimbus 162 + sclk_fimd1 163 Exynos4210 + sclk_mipi1 164 Exynos4210 + sclk_pcm1 165 + sclk_pcm2 166 + sclk_i2s1 167 + sclk_i2s2 168 + sclk_mipihsi 169 Exynos4412 + sclk_mfc 170 + sclk_pcm0 171 + sclk_g3d 172 + sclk_pwm_isp 173 Exynos4x12 + sclk_spi0_isp 174 Exynos4x12 + sclk_spi1_isp 175 Exynos4x12 + sclk_uart_isp 176 Exynos4x12 + + [Peripheral Clock Gates] + + Clock ID SoC (if specific) + ----------------------------------------------- + + fimc0 256 + fimc1 257 + fimc2 258 + fimc3 259 + csis0 260 + csis1 261 + jpeg 262 + smmu_fimc0 263 + smmu_fimc1 264 + smmu_fimc2 265 + smmu_fimc3 266 + smmu_jpeg 267 + vp 268 + mixer 269 + tvenc 270 Exynos4210 + hdmi 271 + smmu_tv 272 + mfc 273 + smmu_mfcl 274 + smmu_mfcr 275 + g3d 276 + g2d 277 Exynos4210 + rotator 278 Exynos4210 + mdma 279 Exynos4210 + smmu_g2d 280 Exynos4210 + smmu_rotator 281 Exynos4210 + smmu_mdma 282 Exynos4210 + fimd0 283 + mie0 284 + mdnie0 285 Exynos4412 + dsim0 286 + smmu_fimd0 287 + fimd1 288 Exynos4210 + mie1 289 Exynos4210 + dsim1 290 Exynos4210 + smmu_fimd1 291 Exynos4210 + pdma0 292 + pdma1 293 + pcie_phy 294 + sata_phy 295 Exynos4210 + tsi 296 + sdmmc0 297 + sdmmc1 298 + sdmmc2 299 + sdmmc3 300 + sdmmc4 301 + sata 302 Exynos4210 + sromc 303 + usb_host 304 + usb_device 305 + pcie 306 + onenand 307 + nfcon 308 + smmu_pcie 309 + gps 310 + smmu_gps 311 + uart0 312 + uart1 313 + uart2 314 + uart3 315 + uart4 316 + i2c0 317 + i2c1 318 + i2c2 319 + i2c3 320 + i2c4 321 + i2c5 322 + i2c6 323 + i2c7 324 + i2c_hdmi 325 + tsadc 326 + spi0 327 + spi1 328 + spi2 329 + i2s1 330 + i2s2 331 + pcm0 332 + i2s0 333 + pcm1 334 + pcm2 335 + pwm 336 + slimbus 337 + spdif 338 + ac97 339 + modemif 340 + chipid 341 + sysreg 342 + hdmi_cec 343 + mct 344 + wdt 345 + rtc 346 + keyif 347 + audss 348 + mipi_hsi 349 Exynos4210 + mdma2 350 Exynos4210 + pixelasyncm0 351 + pixelasyncm1 352 + fimc_lite0 353 Exynos4x12 + fimc_lite1 354 Exynos4x12 + ppmuispx 355 Exynos4x12 + ppmuispmx 356 Exynos4x12 + fimc_isp 357 Exynos4x12 + fimc_drc 358 Exynos4x12 + fimc_fd 359 Exynos4x12 + mcuisp 360 Exynos4x12 + gicisp 361 Exynos4x12 + smmu_isp 362 Exynos4x12 + smmu_drc 363 Exynos4x12 + smmu_fd 364 Exynos4x12 + smmu_lite0 365 Exynos4x12 + smmu_lite1 366 Exynos4x12 + mcuctl_isp 367 Exynos4x12 + mpwm_isp 368 Exynos4x12 + i2c0_isp 369 Exynos4x12 + i2c1_isp 370 Exynos4x12 + mtcadc_isp 371 Exynos4x12 + pwm_isp 372 Exynos4x12 + wdt_isp 373 Exynos4x12 + uart_isp 374 Exynos4x12 + asyncaxim 375 Exynos4x12 + smmu_ispcx 376 Exynos4x12 + spi0_isp 377 Exynos4x12 + spi1_isp 378 Exynos4x12 + pwm_isp_sclk 379 Exynos4x12 + spi0_isp_sclk 380 Exynos4x12 + spi1_isp_sclk 381 Exynos4x12 + uart_isp_sclk 382 Exynos4x12 + + [Mux Clocks] + + Clock ID SoC (if specific) + ----------------------------------------------- + + mout_fimc0 384 + mout_fimc1 385 + mout_fimc2 386 + mout_fimc3 387 + mout_cam0 388 + mout_cam1 389 + mout_csis0 390 + mout_csis1 391 + mout_g3d0 392 + mout_g3d1 393 + mout_g3d 394 + aclk400_mcuisp 395 Exynos4x12 + + [Div Clocks] + + Clock ID SoC (if specific) + ----------------------------------------------- + + div_isp0 450 Exynos4x12 + div_isp1 451 Exynos4x12 + div_mcuisp0 452 Exynos4x12 + div_mcuisp1 453 Exynos4x12 + div_aclk200 454 Exynos4x12 + div_aclk400_mcuisp 455 Exynos4x12 + + +Example 1: An example of a clock controller node is listed below. + + clock: clock-controller@0x10030000 { + compatible = "samsung,exynos4210-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + +Example 2: UART controller node that consumes the clock generated by the clock + controller. Refer to the standard clock bindings for information + about 'clocks' and 'clock-names' property. + + serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 54 0>; + clocks = <&clock 314>, <&clock 153>; + clock-names = "uart", "clk_uart_baud0"; + }; diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt new file mode 100644 index 000000000000..781a6276adf7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt @@ -0,0 +1,177 @@ +* Samsung Exynos5250 Clock Controller + +The Exynos5250 clock controller generates and supplies clock to various +controllers within the Exynos5250 SoC. + +Required Properties: + +- comptible: should be one of the following. + - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +The following is the list of clocks generated by the controller. Each clock is +assigned an identifier and client nodes use this identifier to specify the +clock which they consume. + + + [Core Clocks] + + Clock ID + ---------------------------- + + fin_pll 1 + + [Clock Gate for Special Clocks] + + Clock ID + ---------------------------- + + sclk_cam_bayer 128 + sclk_cam0 129 + sclk_cam1 130 + sclk_gscl_wa 131 + sclk_gscl_wb 132 + sclk_fimd1 133 + sclk_mipi1 134 + sclk_dp 135 + sclk_hdmi 136 + sclk_pixel 137 + sclk_audio0 138 + sclk_mmc0 139 + sclk_mmc1 140 + sclk_mmc2 141 + sclk_mmc3 142 + sclk_sata 143 + sclk_usb3 144 + sclk_jpeg 145 + sclk_uart0 146 + sclk_uart1 147 + sclk_uart2 148 + sclk_uart3 149 + sclk_pwm 150 + sclk_audio1 151 + sclk_audio2 152 + sclk_spdif 153 + sclk_spi0 154 + sclk_spi1 155 + sclk_spi2 156 + + + [Peripheral Clock Gates] + + Clock ID + ---------------------------- + + gscl0 256 + gscl1 257 + gscl2 258 + gscl3 259 + gscl_wa 260 + gscl_wb 261 + smmu_gscl0 262 + smmu_gscl1 263 + smmu_gscl2 264 + smmu_gscl3 265 + mfc 266 + smmu_mfcl 267 + smmu_mfcr 268 + rotator 269 + jpeg 270 + mdma1 271 + smmu_rotator 272 + smmu_jpeg 273 + smmu_mdma1 274 + pdma0 275 + pdma1 276 + sata 277 + usbotg 278 + mipi_hsi 279 + sdmmc0 280 + sdmmc1 281 + sdmmc2 282 + sdmmc3 283 + sromc 284 + usb2 285 + usb3 286 + sata_phyctrl 287 + sata_phyi2c 288 + uart0 289 + uart1 290 + uart2 291 + uart3 292 + uart4 293 + i2c0 294 + i2c1 295 + i2c2 296 + i2c3 297 + i2c4 298 + i2c5 299 + i2c6 300 + i2c7 301 + i2c_hdmi 302 + adc 303 + spi0 304 + spi1 305 + spi2 306 + i2s1 307 + i2s2 308 + pcm1 309 + pcm2 310 + pwm 311 + spdif 312 + ac97 313 + hsi2c0 314 + hsi2c1 315 + hs12c2 316 + hs12c3 317 + chipid 318 + sysreg 319 + pmu 320 + cmu_top 321 + cmu_core 322 + cmu_mem 323 + tzpc0 324 + tzpc1 325 + tzpc2 326 + tzpc3 327 + tzpc4 328 + tzpc5 329 + tzpc6 330 + tzpc7 331 + tzpc8 332 + tzpc9 333 + hdmi_cec 334 + mct 335 + wdt 336 + rtc 337 + tmu 338 + fimd1 339 + mie1 340 + dsim0 341 + dp 342 + mixer 343 + hdmi 345 + +Example 1: An example of a clock controller node is listed below. + + clock: clock-controller@0x10010000 { + compatible = "samsung,exynos5250-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + +Example 2: UART controller node that consumes the clock generated by the clock + controller. Refer to the standard clock bindings for information + about 'clocks' and 'clock-names' property. + + serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 54 0>; + clocks = <&clock 314>, <&clock 153>; + clock-names = "uart", "clk_uart_baud0"; + }; diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt new file mode 100644 index 000000000000..4499e9966bc9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt @@ -0,0 +1,61 @@ +* Samsung Exynos5440 Clock Controller + +The Exynos5440 clock controller generates and supplies clock to various +controllers within the Exynos5440 SoC. + +Required Properties: + +- comptible: should be "samsung,exynos5440-clock". + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +The following is the list of clocks generated by the controller. Each clock is +assigned an identifier and client nodes use this identifier to specify the +clock which they consume. + + + [Core Clocks] + + Clock ID + ---------------------------- + + xtal 1 + arm_clk 2 + + [Peripheral Clock Gates] + + Clock ID + ---------------------------- + + spi_baud 16 + pb0_250 17 + pr0_250 18 + pr1_250 19 + b_250 20 + b_125 21 + b_200 22 + sata 23 + usb 24 + gmac0 25 + cs250 26 + pb0_250_o 27 + pr0_250_o 28 + pr1_250_o 29 + b_250_o 30 + b_125_o 31 + b_200_o 32 + sata_o 33 + usb_o 34 + gmac0_o 35 + cs250_o 36 + +Example: An example of a clock controller node is listed below. + + clock: clock-controller@0x10010000 { + compatible = "samsung,exynos5440-clock"; + reg = <0x160000 0x10000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt new file mode 100644 index 000000000000..d6cb083b90a2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt @@ -0,0 +1,303 @@ +NVIDIA Tegra114 Clock And Reset Controller + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +The CAR (Clock And Reset) Controller on Tegra is the HW module responsible +for muxing and gating Tegra's clocks, and setting their rates. + +Required properties : +- compatible : Should be "nvidia,tegra114-car" +- reg : Should contain CAR registers location and length +- clocks : Should contain phandle and clock specifiers for two clocks: + the 32 KHz "32k_in", and the board-specific oscillator "osc". +- #clock-cells : Should be 1. + In clock consumers, this cell represents the clock ID exposed by the CAR. + + The first 160 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB + registers. These IDs often match those in the CAR's RST_DEVICES registers, + but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In + this case, those clocks are assigned IDs above 160 in order to highlight + this issue. Implementations that interpret these clock IDs as bit values + within the CLK_OUT_ENB or RST_DEVICES registers should be careful to + explicitly handle these special cases. + + The balance of the clocks controlled by the CAR are assigned IDs of 160 and + above. + + 0 unassigned + 1 unassigned + 2 unassigned + 3 unassigned + 4 rtc + 5 timer + 6 uarta + 7 unassigned (register bit affects uartb and vfir) + 8 unassigned + 9 sdmmc2 + 10 unassigned (register bit affects spdif_in and spdif_out) + 11 i2s1 + 12 i2c1 + 13 ndflash + 14 sdmmc1 + 15 sdmmc4 + 16 unassigned + 17 pwm + 18 i2s2 + 19 epp + 20 unassigned (register bit affects vi and vi_sensor) + 21 2d + 22 usbd + 23 isp + 24 3d + 25 unassigned + 26 disp2 + 27 disp1 + 28 host1x + 29 vcp + 30 i2s0 + 31 unassigned + + 32 unassigned + 33 unassigned + 34 apbdma + 35 unassigned + 36 kbc + 37 unassigned + 38 unassigned + 39 unassigned (register bit affects fuse and fuse_burn) + 40 kfuse + 41 sbc1 + 42 nor + 43 unassigned + 44 sbc2 + 45 unassigned + 46 sbc3 + 47 i2c5 + 48 dsia + 49 unassigned + 50 mipi + 51 hdmi + 52 csi + 53 unassigned + 54 i2c2 + 55 uartc + 56 mipi-cal + 57 emc + 58 usb2 + 59 usb3 + 60 msenc + 61 vde + 62 bsea + 63 bsev + + 64 unassigned + 65 uartd + 66 unassigned + 67 i2c3 + 68 sbc4 + 69 sdmmc3 + 70 unassigned + 71 owr + 72 afi + 73 csite + 74 unassigned + 75 unassigned + 76 la + 77 trace + 78 soc_therm + 79 dtv + 80 ndspeed + 81 i2cslow + 82 dsib + 83 tsec + 84 unassigned + 85 unassigned + 86 unassigned + 87 unassigned + 88 unassigned + 89 xusb_host + 90 unassigned + 91 msenc + 92 csus + 93 unassigned + 94 unassigned + 95 unassigned (bit affects xusb_dev and xusb_dev_src) + + 96 unassigned + 97 unassigned + 98 unassigned + 99 mselect + 100 tsensor + 101 i2s3 + 102 i2s4 + 103 i2c4 + 104 sbc5 + 105 sbc6 + 106 d_audio + 107 apbif + 108 dam0 + 109 dam1 + 110 dam2 + 111 hda2codec_2x + 112 unassigned + 113 audio0_2x + 114 audio1_2x + 115 audio2_2x + 116 audio3_2x + 117 audio4_2x + 118 spdif_2x + 119 actmon + 120 extern1 + 121 extern2 + 122 extern3 + 123 unassigned + 124 unassigned + 125 hda + 126 unassigned + 127 se + + 128 hda2hdmi + 129 unassigned + 130 unassigned + 131 unassigned + 132 unassigned + 133 unassigned + 134 unassigned + 135 unassigned + 136 unassigned + 137 unassigned + 138 unassigned + 139 unassigned + 140 unassigned + 141 unassigned + 142 unassigned + 143 unassigned (bit affects xusb_falcon_src, xusb_fs_src, + xusb_host_src and xusb_ss_src) + 144 cilab + 145 cilcd + 146 cile + 147 dsialp + 148 dsiblp + 149 unassigned + 150 dds + 151 unassigned + 152 dp2 + 153 amx + 154 adx + 155 unassigned (bit affects dfll_ref and dfll_soc) + 156 xusb_ss + + 192 uartb + 193 vfir + 194 spdif_in + 195 spdif_out + 196 vi + 197 vi_sensor + 198 fuse + 199 fuse_burn + 200 clk_32k + 201 clk_m + 202 clk_m_div2 + 203 clk_m_div4 + 204 pll_ref + 205 pll_c + 206 pll_c_out1 + 207 pll_c2 + 208 pll_c3 + 209 pll_m + 210 pll_m_out1 + 211 pll_p + 212 pll_p_out1 + 213 pll_p_out2 + 214 pll_p_out3 + 215 pll_p_out4 + 216 pll_a + 217 pll_a_out0 + 218 pll_d + 219 pll_d_out0 + 220 pll_d2 + 221 pll_d2_out0 + 222 pll_u + 223 pll_u_480M + 224 pll_u_60M + 225 pll_u_48M + 226 pll_u_12M + 227 pll_x + 228 pll_x_out0 + 229 pll_re_vco + 230 pll_re_out + 231 pll_e_out0 + 232 spdif_in_sync + 233 i2s0_sync + 234 i2s1_sync + 235 i2s2_sync + 236 i2s3_sync + 237 i2s4_sync + 238 vimclk_sync + 239 audio0 + 240 audio1 + 241 audio2 + 242 audio3 + 243 audio4 + 244 spdif + 245 clk_out_1 + 246 clk_out_2 + 247 clk_out_3 + 248 blink + 252 xusb_host_src + 253 xusb_falcon_src + 254 xusb_fs_src + 255 xusb_ss_src + 256 xusb_dev_src + 257 xusb_dev + 258 xusb_hs_src + 259 sclk + 260 hclk + 261 pclk + 262 cclk_g + 263 cclk_lp + 264 dfll_ref + 265 dfll_soc + +Example SoC include file: + +/ { + tegra_car: clock { + compatible = "nvidia,tegra114-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + }; + + usb@c5004000 { + clocks = <&tegra_car 58>; /* usb2 */ + }; +}; + +Example board file: + +/ { + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + osc: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + clk_32k: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + &tegra_car { + clocks = <&clk_32k> <&osc>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt index 0921fac73528..e885680f6b45 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt @@ -120,8 +120,8 @@ Required properties : 90 clk_d 91 unassigned 92 sus - 93 cdev1 - 94 cdev2 + 93 cdev2 + 94 cdev1 95 unassigned 96 uart2 diff --git a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt deleted file mode 100644 index f4dc5233167e..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt +++ /dev/null @@ -1,24 +0,0 @@ -VIA/Wondermedia VT8500 GPIO Controller ------------------------------------------------------ - -Required properties: -- compatible : "via,vt8500-gpio", "wm,wm8505-gpio" - or "wm,wm8650-gpio" depending on your SoC -- reg : Should contain 1 register range (address and length) -- #gpio-cells : should be <3>. - 1) bank - 2) pin number - 3) flags - should be 0 - -Example: - - gpio: gpio-controller@d8110000 { - compatible = "via,vt8500-gpio"; - gpio-controller; - reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; - }; - - vibrate { - gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */ - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt new file mode 100644 index 000000000000..c54c5a9a2a90 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt @@ -0,0 +1,53 @@ +Samsung S3C24XX Interrupt Controllers + +The S3C24XX SoCs contain a custom set of interrupt controllers providing a +varying number of interrupt sources. The set consists of a main- and sub- +controller and on newer SoCs even a second main controller. + +Required properties: +- compatible: Compatible property value should be "samsung,s3c2410-irq" + for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later. + +- reg: Physical base address of the controller and length of memory mapped + region. + +- interrupt-controller : Identifies the node as an interrupt controller + +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 4 and interrupt descriptor shall + have the following format: + <ctrl_num parent_irq ctrl_irq type> + + ctrl_num contains the controller to use: + - 0 ... main controller + - 1 ... sub controller + - 2 ... second main controller on s3c2416 and s3c2450 + parent_irq contains the parent bit in the main controller and will be + ignored in main controllers + ctrl_irq contains the interrupt bit of the controller + type contains the trigger type to use + +Example: + + interrupt-controller@4a000000 { + compatible = "samsung,s3c2410-irq"; + reg = <0x4a000000 0x100>; + interrupt-controller; + #interrupt-cells=<4>; + }; + + [...] + + serial@50000000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50000000 0x4000>; + interrupt-parent = <&subintc>; + interrupts = <1 28 0 4>, <1 28 1 4>; + }; + + rtc@57000000 { + compatible = "samsung,s3c2410-rtc"; + reg = <0x57000000 0x100>; + interrupt-parent = <&intc>; + interrupts = <0 30 0 3>, <0 8 0 3>; + }; diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt index 67ec3d4ccc7f..bf0182d8da25 100644 --- a/Documentation/devicetree/bindings/media/s5p-mfc.txt +++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt @@ -21,3 +21,24 @@ Required properties: - samsung,mfc-l : Base address of the second memory bank used by MFC for DMA contiguous memory allocation and its size. + +Optional properties: + - samsung,power-domain : power-domain property defined with a phandle + to respective power domain. + +Example: +SoC specific DT entry: + +mfc: codec@13400000 { + compatible = "samsung,mfc-v5"; + reg = <0x13400000 0x10000>; + interrupts = <0 94 0>; + samsung,power-domain = <&pd_mfc>; +}; + +Board specific DT entry: + +codec@13400000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt new file mode 100644 index 000000000000..420b3ab18890 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt @@ -0,0 +1,98 @@ +Device tree bindings for NOR flash connect to TI GPMC + +NOR flash connected to the TI GPMC (found on OMAP boards) are represented as +child nodes of the GPMC controller with a name of "nor". + +All timing relevant properties as well as generic GPMC child properties are +explained in a separate documents. Please refer to +Documentation/devicetree/bindings/bus/ti-gpmc.txt + +Required properties: +- bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and + 16-bit devices and so must be either 1 or 2 bytes. +- compatible: Documentation/devicetree/bindings/mtd/mtd-physmap.txt +- gpmc,cs-on-ns: Chip-select assertion time +- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads +- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes +- gpmc,oe-on-ns: Output-enable assertion time +- gpmc,oe-off-ns: Output-enable de-assertion time +- gpmc,we-on-ns Write-enable assertion time +- gpmc,we-off-ns: Write-enable de-assertion time +- gpmc,access-ns: Start cycle to first data capture (read access) +- gpmc,rd-cycle-ns: Total read cycle time +- gpmc,wr-cycle-ns: Total write cycle time +- linux,mtd-name: Documentation/devicetree/bindings/mtd/mtd-physmap.txt +- reg: Chip-select, base address (relative to chip-select) + and size of NOR flash. Note that base address will be + typically 0 as this is the start of the chip-select. + +Optional properties: +- gpmc,XXX Additional GPMC timings and settings parameters. See + Documentation/devicetree/bindings/bus/ti-gpmc.txt + +Optional properties for partiton table parsing: +- #address-cells: should be set to 1 +- #size-cells: should be set to 1 + +Example: + +gpmc: gpmc@6e000000 { + compatible = "ti,omap3430-gpmc", "simple-bus"; + ti,hwmods = "gpmc"; + reg = <0x6e000000 0x1000>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0x10000000 0x08000000>; + + nor@0,0 { + compatible = "cfi-flash"; + linux,mtd-name= "intel,pf48f6000m0y1be"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x08000000>; + bank-width = <2>; + + gpmc,mux-add-data; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <186>; + gpmc,cs-wr-off-ns = <186>; + gpmc,adv-on-ns = <12>; + gpmc,adv-rd-off-ns = <48>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <114>; + gpmc,page-burst-access-ns = <6>; + gpmc,bus-turnaround-ns = <12>; + gpmc,cycle2cycle-delay-ns = <18>; + gpmc,wr-data-mux-bus-ns = <90>; + gpmc,wr-access-ns = <186>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + + partition@0 { + label = "bootloader-nor"; + reg = <0 0x40000>; + }; + partition@0x40000 { + label = "params-nor"; + reg = <0x40000 0x40000>; + }; + partition@0x80000 { + label = "kernel-nor"; + reg = <0x80000 0x200000>; + }; + partition@0x280000 { + label = "filesystem-nor"; + reg = <0x240000 0x7d80000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt index deec9da224a2..b7529424ac88 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt @@ -10,6 +10,8 @@ Documentation/devicetree/bindings/bus/ti-gpmc.txt Required properties: - reg: The CS line the peripheral is connected to + - gpmc,device-width Width of the ONENAND device connected to the GPMC + in bytes. Must be 1 or 2. Optional properties: @@ -34,6 +36,7 @@ Example for an OMAP3430 board: onenand@0 { reg = <0 0 0>; /* CS0, offset 0 */ + gpmc,device-width = <2>; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt new file mode 100644 index 000000000000..24cb4e46f675 --- /dev/null +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt @@ -0,0 +1,97 @@ +Device tree bindings for Ethernet chip connected to TI GPMC + +Besides being used to interface with external memory devices, the +General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices +such as ethernet controllers to processors using the TI GPMC as a data bus. + +Ethernet controllers connected to TI GPMC are represented as child nodes of +the GPMC controller with an "ethernet" name. + +All timing relevant properties as well as generic GPMC child properties are +explained in a separate documents. Please refer to +Documentation/devicetree/bindings/bus/ti-gpmc.txt + +For the properties relevant to the ethernet controller connected to the GPMC +refer to the binding documentation of the device. For example, the documentation +for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt + +Child nodes need to specify the GPMC bus address width using the "bank-width" +property but is possible that an ethernet controller also has a property to +specify the I/O registers address width. Even when the GPMC has a maximum 16-bit +address width, it supports devices with 32-bit word registers. +For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an +OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;". + +Required properties: +- bank-width: Address width of the device in bytes. GPMC supports 8-bit + and 16-bit devices and so must be either 1 or 2 bytes. +- compatible: Compatible string property for the ethernet child device. +- gpmc,cs-on: Chip-select assertion time +- gpmc,cs-rd-off: Chip-select de-assertion time for reads +- gpmc,cs-wr-off: Chip-select de-assertion time for writes +- gpmc,oe-on: Output-enable assertion time +- gpmc,oe-off Output-enable de-assertion time +- gpmc,we-on: Write-enable assertion time +- gpmc,we-off: Write-enable de-assertion time +- gpmc,access: Start cycle to first data capture (read access) +- gpmc,rd-cycle: Total read cycle time +- gpmc,wr-cycle: Total write cycle time +- reg: Chip-select, base address (relative to chip-select) + and size of the memory mapped for the device. + Note that base address will be typically 0 as this + is the start of the chip-select. + +Optional properties: +- gpmc,XXX Additional GPMC timings and settings parameters. See + Documentation/devicetree/bindings/bus/ti-gpmc.txt + +Example: + +gpmc: gpmc@6e000000 { + compatible = "ti,omap3430-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x6e000000 0x1000>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <5 0 0x2c000000 0x1000000>; + + ethernet@5,0 { + compatible = "smsc,lan9221", "smsc,lan9115"; + reg = <5 0 0xff>; + bank-width = <2>; + + gpmc,mux-add-data; + gpmc,cs-on = <0>; + gpmc,cs-rd-off = <186>; + gpmc,cs-wr-off = <186>; + gpmc,adv-on = <12>; + gpmc,adv-rd-off = <48>; + gpmc,adv-wr-off = <48>; + gpmc,oe-on = <54>; + gpmc,oe-off = <168>; + gpmc,we-on = <54>; + gpmc,we-off = <168>; + gpmc,rd-cycle = <186>; + gpmc,wr-cycle = <186>; + gpmc,access = <114>; + gpmc,page-burst-access = <6>; + gpmc,bus-turnaround = <12>; + gpmc,cycle2cycle-delay = <18>; + gpmc,wr-data-mux-bus = <90>; + gpmc,wr-access = <186>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + + interrupt-parent = <&gpio6>; + interrupts = <16>; + vmmc-supply = <&vddvario>; + vmmc_aux-supply = <&vdd33a>; + reg-io-width = <4>; + + smsc,save-mac-address; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt new file mode 100644 index 000000000000..b3aa90f0ce44 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt @@ -0,0 +1,57 @@ +VIA VT8500 and Wondermedia WM8xxx-series pinmux/gpio controller + +These SoCs contain a combined Pinmux/GPIO module. Each pin may operate as +either a GPIO in, GPIO out or as an alternate function (I2C, SPI etc). + +Required properties: +- compatible: "via,vt8500-pinctrl", "wm,wm8505-pinctrl", "wm,wm8650-pinctrl", + "wm8750-pinctrl" or "wm,wm8850-pinctrl" +- reg: Should contain the physical address of the module's registers. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Should be two. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters. + bit 0 - active low + +Please refer to ../gpio/gpio.txt for a general description of GPIO bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Each pin configuration node lists the pin(s) to which it applies, and one or +more of the mux functions to select on those pin(s), and pull-up/down +configuration. Each subnode only affects those parameters that are explicitly +listed. In other words, a subnode that lists only a mux function implies no +information about any pull configuration. Similarly, a subnode that lists only +a pull parameter implies no information about the mux function. + +Required subnode-properties: +- wm,pins: An array of cells. Each cell contains the ID of a pin. + +Optional subnode-properties: +- wm,function: Integer, containing the function to mux to the pin(s): + 0: GPIO in + 1: GPIO out + 2: alternate + +- wm,pull: Integer, representing the pull-down/up to apply to the pin(s): + 0: none + 1: down + 2: up + +Each of wm,function and wm,pull may contain either a single value which +will be applied to all pins in wm,pins, or one value for each entry in +wm,pins. + +Example: + + pinctrl: pinctrl { + compatible = "wm,wm8505-pinctrl"; + reg = <0xD8110000 0x10000>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/reset/reset.txt b/Documentation/devicetree/bindings/reset/reset.txt new file mode 100644 index 000000000000..31db6ff84908 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/reset.txt @@ -0,0 +1,75 @@ += Reset Signal Device Tree Bindings = + +This binding is intended to represent the hardware reset signals present +internally in most IC (SoC, FPGA, ...) designs. Reset signals for whole +standalone chips are most likely better represented as GPIOs, although there +are likely to be exceptions to this rule. + +Hardware blocks typically receive a reset signal. This signal is generated by +a reset provider (e.g. power management or clock module) and received by a +reset consumer (the module being reset, or a module managing when a sub- +ordinate module is reset). This binding exists to represent the provider and +consumer, and provide a way to couple the two together. + +A reset signal is represented by the phandle of the provider, plus a reset +specifier - a list of DT cells that represents the reset signal within the +provider. The length (number of cells) and semantics of the reset specifier +are dictated by the binding of the reset provider, although common schemes +are described below. + +A word on where to place reset signal consumers in device tree: It is possible +in hardware for a reset signal to affect multiple logically separate HW blocks +at once. In this case, it would be unwise to represent this reset signal in +the DT node of each affected HW block, since if activated, an unrelated block +may be reset. Instead, reset signals should be represented in the DT node +where it makes most sense to control it; this may be a bus node if all +children of the bus are affected by the reset signal, or an individual HW +block node for dedicated reset signals. The intent of this binding is to give +appropriate software access to the reset signals in order to manage the HW, +rather than to slavishly enumerate the reset signal that affects each HW +block. + += Reset providers = + +Required properties: +#reset-cells: Number of cells in a reset specifier; Typically 0 for nodes + with a single reset output and 1 for nodes with multiple + reset outputs. + +For example: + + rst: reset-controller { + #reset-cells = <1>; + }; + += Reset consumers = + +Required properties: +resets: List of phandle and reset specifier pairs, one pair + for each reset signal that affects the device, or that the + device manages. Note: if the reset provider specifies '0' for + #reset-cells, then only the phandle portion of the pair will + appear. + +Optional properties: +reset-names: List of reset signal name strings sorted in the same order as + the resets property. Consumers drivers will use reset-names to + match reset signal names with reset specifiers. + +For example: + + device { + resets = <&rst 20>; + reset-names = "reset"; + }; + +This represents a device with a single reset signal named "reset". + + bus { + resets = <&rst 10> <&rst 11> <&rst 12> <&rst 11>; + reset-names = "i2s1", "i2s2", "dma", "mixer"; + }; + +This represents a bus that controls the reset signal of each of four sub- +ordinate devices. Consider for example a bus that fails to operate unless no +child device has reset asserted. diff --git a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt new file mode 100644 index 000000000000..993695c659e1 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt @@ -0,0 +1,17 @@ +Cadence TTC - Triple Timer Counter + +Required properties: +- compatible : Should be "cdns,ttc". +- reg : Specifies base physical address and size of the registers. +- interrupts : A list of 3 interrupts; one per timer channel. +- clocks: phandle to the source clock + +Example: + +ttc0: ttc0@f8001000 { + interrupt-parent = <&intc>; + interrupts = < 0 10 4 0 11 4 0 12 4 >; + compatible = "cdns,ttc"; + reg = <0xF8001000 0x1000>; + clocks = <&cpu_clk 3>; +}; diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt new file mode 100644 index 000000000000..cb47bfbcaeea --- /dev/null +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt @@ -0,0 +1,68 @@ +Samsung's Multi Core Timer (MCT) + +The Samsung's Multi Core Timer (MCT) module includes two main blocks, the +global timer and CPU local timers. The global timer is a 64-bit free running +up-counter and can generate 4 interrupts when the counter reaches one of the +four preset counter values. The CPU local timers are 32-bit free running +down-counters and generate an interrupt when the counter expires. There is +one CPU local timer instantiated in MCT for every CPU in the system. + +Required properties: + +- compatible: should be "samsung,exynos4210-mct". + (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct. + (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct. + +- reg: base address of the mct controller and length of the address space + it occupies. + +- interrupts: the list of interrupts generated by the controller. The following + should be the order of the interrupts specified. The local timer interrupts + should be specified after the four global timer interrupts have been + specified. + + 0: Global Timer Interrupt 0 + 1: Global Timer Interrupt 1 + 2: Global Timer Interrupt 2 + 3: Global Timer Interrupt 3 + 4: Local Timer Interrupt 0 + 5: Local Timer Interrupt 1 + 6: .. + 7: .. + i: Local Timer Interrupt n + +Example 1: In this example, the system uses only the first global timer + interrupt generated by MCT and the remaining three global timer + interrupts are unused. Two local timer interrupts have been + specified. + + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>, + <0 42 0>, <0 48 0>; + }; + +Example 2: In this example, the MCT global and local timer interrupts are + connected to two seperate interrupt controllers. Hence, an + interrupt-map is created to map the interrupts to the respective + interrupt controllers. + + mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &combiner 23 3>, + <0x4 0 &gic 0 120 0>, + <0x5 0 &gic 0 121 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt new file mode 100644 index 000000000000..f66fcddba46f --- /dev/null +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -0,0 +1,40 @@ +Samsung Exynos SoC USB controller + +The USB devices interface with USB controllers on Exynos SOCs. +The device node has following properties. + +EHCI +Required properties: + - compatible: should be "samsung,exynos4210-ehci" for USB 2.0 + EHCI controller in host mode. + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: interrupt number to the cpu. + +Optional properties: + - samsung,vbus-gpio: if present, specifies the GPIO that + needs to be pulled up for the bus to be powered. + +Example: + + usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <0 71 0>; + samsung,vbus-gpio = <&gpx2 6 1 3 3>; + }; + +OHCI +Required properties: + - compatible: should be "samsung,exynos4210-ohci" for USB 2.0 + OHCI companion controller in host mode. + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: interrupt number to the cpu. + +Example: + usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <0 71 0>; + }; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 62079d434581..1e31dac36a5f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -689,12 +689,15 @@ config ARCH_SA1100 config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" select ARCH_HAS_CPUFREQ - select ARCH_USES_GETTIMEOFFSET + select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS + select MULTI_IRQ_HANDLER select NEED_MACH_GPIO_H select NEED_MACH_IO_H help @@ -707,10 +710,11 @@ config ARCH_S3C64XX bool "Samsung S3C64XX" select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB - select ARCH_USES_GETTIMEOFFSET select ARM_VIC select CLKDEV_LOOKUP + select CLKSRC_MMIO select CPU_V6 + select GENERIC_CLOCKEVENTS select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -744,9 +748,11 @@ config ARCH_S5P64X0 config ARCH_S5PC100 bool "Samsung S5PC100" - select ARCH_USES_GETTIMEOFFSET + select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select CLKSRC_MMIO select CPU_V7 + select GENERIC_CLOCKEVENTS select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -779,6 +785,7 @@ config ARCH_EXYNOS select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SPARSEMEM_ENABLE select CLKDEV_LOOKUP + select COMMON_CLK select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_CLK @@ -1552,7 +1559,8 @@ config ARCH_NR_GPIO default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 512 if SOC_OMAP5 default 392 if ARCH_U8500 - default 288 if ARCH_VT8500 || ARCH_SUNXI + default 352 if ARCH_VT8500 + default 288 if ARCH_SUNXI default 264 if MACH_H4700 default 0 help diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 20358fb43450..55196639211d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -49,7 +49,10 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ + exynos4412-odroidx.dtb \ exynos4412-smdk4412.dtb \ + exynos4412-origen.dtb \ + exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ exynos5440-ssdk5440.dtb diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index 46c098017036..62eceb4f0d3f 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -24,6 +24,144 @@ samsung,i2c-max-bus-freq = <378000>; gpios = <&gpb3 0 2 3 0>, <&gpb3 1 2 3 0>; + + max77686@09 { + compatible = "maxim,max77686"; + reg = <0x09>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "P1.0V_LDO_OUT1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "P1.8V_LDO_OUT2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "P1.8V_LDO_OUT3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.35V_BUCK_OUT6"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "P2.0V_BUCK_OUT7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "P2.85V_BUCK_OUT8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + }; + }; }; i2c@12C70000 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 1a62bcf18aa3..9ac47d51c407 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -86,6 +86,8 @@ compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; interrupts = <0 43 0>; + clocks = <&clock 345>; + clock-names = "watchdog"; status = "disabled"; }; @@ -93,6 +95,8 @@ compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupts = <0 44 0>, <0 45 0>; + clocks = <&clock 346>; + clock-names = "rtc"; status = "disabled"; }; @@ -100,6 +104,8 @@ compatible = "samsung,s5pv210-keypad"; reg = <0x100A0000 0x100>; interrupts = <0 109 0>; + clocks = <&clock 347>; + clock-names = "keypad"; status = "disabled"; }; @@ -107,6 +113,8 @@ compatible = "samsung,exynos4210-sdhci"; reg = <0x12510000 0x100>; interrupts = <0 73 0>; + clocks = <&clock 297>, <&clock 145>; + clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; }; @@ -114,6 +122,8 @@ compatible = "samsung,exynos4210-sdhci"; reg = <0x12520000 0x100>; interrupts = <0 74 0>; + clocks = <&clock 298>, <&clock 146>; + clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; }; @@ -121,6 +131,8 @@ compatible = "samsung,exynos4210-sdhci"; reg = <0x12530000 0x100>; interrupts = <0 75 0>; + clocks = <&clock 299>, <&clock 147>; + clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; }; @@ -128,6 +140,16 @@ compatible = "samsung,exynos4210-sdhci"; reg = <0x12540000 0x100>; interrupts = <0 76 0>; + clocks = <&clock 300>, <&clock 148>; + clock-names = "hsmmc", "mmc_busclk.2"; + status = "disabled"; + }; + + mfc: codec@13400000 { + compatible = "samsung,mfc-v5"; + reg = <0x13400000 0x10000>; + interrupts = <0 94 0>; + samsung,power-domain = <&pd_mfc>; status = "disabled"; }; @@ -135,6 +157,8 @@ compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; interrupts = <0 52 0>; + clocks = <&clock 312>, <&clock 151>; + clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -142,6 +166,8 @@ compatible = "samsung,exynos4210-uart"; reg = <0x13810000 0x100>; interrupts = <0 53 0>; + clocks = <&clock 313>, <&clock 152>; + clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -149,6 +175,8 @@ compatible = "samsung,exynos4210-uart"; reg = <0x13820000 0x100>; interrupts = <0 54 0>; + clocks = <&clock 314>, <&clock 153>; + clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -156,6 +184,8 @@ compatible = "samsung,exynos4210-uart"; reg = <0x13830000 0x100>; interrupts = <0 55 0>; + clocks = <&clock 315>, <&clock 154>; + clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -165,6 +195,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x13860000 0x100>; interrupts = <0 58 0>; + clocks = <&clock 317>; + clock-names = "i2c"; status = "disabled"; }; @@ -174,6 +206,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x13870000 0x100>; interrupts = <0 59 0>; + clocks = <&clock 318>; + clock-names = "i2c"; status = "disabled"; }; @@ -183,6 +217,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x13880000 0x100>; interrupts = <0 60 0>; + clocks = <&clock 319>; + clock-names = "i2c"; status = "disabled"; }; @@ -192,6 +228,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x13890000 0x100>; interrupts = <0 61 0>; + clocks = <&clock 320>; + clock-names = "i2c"; status = "disabled"; }; @@ -201,6 +239,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x138A0000 0x100>; interrupts = <0 62 0>; + clocks = <&clock 321>; + clock-names = "i2c"; status = "disabled"; }; @@ -210,6 +250,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x138B0000 0x100>; interrupts = <0 63 0>; + clocks = <&clock 322>; + clock-names = "i2c"; status = "disabled"; }; @@ -219,6 +261,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x138C0000 0x100>; interrupts = <0 64 0>; + clocks = <&clock 323>; + clock-names = "i2c"; status = "disabled"; }; @@ -228,6 +272,8 @@ compatible = "samsung,s3c2440-i2c"; reg = <0x138D0000 0x100>; interrupts = <0 65 0>; + clocks = <&clock 324>; + clock-names = "i2c"; status = "disabled"; }; @@ -239,6 +285,8 @@ rx-dma-channel = <&pdma0 6>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 327>, <&clock 159>; + clock-names = "spi", "spi_busclk0"; status = "disabled"; }; @@ -250,6 +298,8 @@ rx-dma-channel = <&pdma1 6>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 328>, <&clock 160>; + clock-names = "spi", "spi_busclk0"; status = "disabled"; }; @@ -261,6 +311,8 @@ rx-dma-channel = <&pdma0 8>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 329>, <&clock 161>; + clock-names = "spi", "spi_busclk0"; status = "disabled"; }; @@ -275,6 +327,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x12680000 0x1000>; interrupts = <0 35 0>; + clocks = <&clock 292>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -284,6 +338,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x12690000 0x1000>; interrupts = <0 36 0>; + clocks = <&clock 293>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -293,6 +349,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x12850000 0x1000>; interrupts = <0 34 0>; + clocks = <&clock 279>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <1>; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index f2710018e84e..1b30bc8e2654 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -57,6 +57,12 @@ status = "okay"; }; + codec@13400000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; + }; + serial@13800000 { status = "okay"; }; @@ -121,4 +127,16 @@ linux,default-trigger = "heartbeat"; }; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index f63490707f3a..f52c86e2d424 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -43,6 +43,12 @@ status = "okay"; }; + codec@13400000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; + }; + serial@13800000 { status = "okay"; }; @@ -189,4 +195,16 @@ }; }; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <12000000>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index c346b64dff55..9a14484c7bb1 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -289,4 +289,16 @@ }; }; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 2feffc70814c..15143bdbafb8 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -47,6 +47,42 @@ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; }; + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + clocks = <&clock 3>, <&clock 344>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &gic 0 57 0>, + <0x1 0 &gic 0 69 0>, + <0x2 0 &combiner 12 6>, + <0x3 0 &combiner 12 7>, + <0x4 0 &gic 0 42 0>, + <0x5 0 &gic 0 48 0>; + }; + }; + + clock: clock-controller@0x10030000 { + compatible = "samsung,exynos4210-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&combiner>; + interrupts = <2 2>, <3 2>; + }; + pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos4210-pinctrl"; reg = <0x11400000 0x1000>; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index c6ae2005961f..36d4299789ef 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -25,4 +25,26 @@ gic:interrupt-controller@10490000 { cpu-offset = <0x8000>; }; + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &gic 0 57 0>, + <0x1 0 &combiner 12 5>, + <0x2 0 &combiner 12 6>, + <0x3 0 &combiner 12 7>, + <0x4 0 &gic 1 12 0>, + <0x5 0 &gic 1 12 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts new file mode 100644 index 000000000000..53bc8bf77984 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -0,0 +1,111 @@ +/* + * Hardkernel's Exynos4412 based ODROID-X board device tree source + * + * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com> + * + * Device tree source file for Hardkernel's ODROID-X board which is based on + * Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4412.dtsi" + +/ { + model = "Hardkernel ODROID-X board based on Exynos4412"; + compatible = "hardkernel,odroid-x", "samsung,exynos4412"; + + memory { + reg = <0x40000000 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + led1 { + label = "led1:heart"; + gpios = <&gpc1 0 1>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + led2 { + label = "led2:mmc0"; + gpios = <&gpc1 2 1>; + default-state = "on"; + linux,default-trigger = "mmc0"; + }; + }; + + mshc@12550000 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + status = "okay"; + + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + regulator_p3v3 { + compatible = "regulator-fixed"; + regulator-name = "p3v3_en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpa1 1 1>; + enable-active-high; + regulator-boot-on; + }; + + rtc@10070000 { + status = "okay"; + }; + + sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts new file mode 100644 index 000000000000..1fecf7666dc0 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -0,0 +1,432 @@ +/* + * Insignal's Exynos4412 based Origen board device tree source + * + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Insignal's Origen board which is based on + * Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4412.dtsi" + +/ { + model = "Insignal Origen evaluation board based on Exynos4412"; + compatible = "insignal,origen4412", "samsung,exynos4412"; + + memory { + reg = <0x40000000 0x40000000>; + }; + + chosen { + bootargs ="console=ttySAC2,115200"; + }; + + mmc_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 0>; + enable-active-high; + }; + + sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; + }; + + mshc@12550000 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + status = "okay"; + + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + codec@13400000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + + i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck-default-dvs-idx = <3>; + + s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>, + <&gpx2 4 0>, + <&gpx2 5 0>; + + s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>, + <&gpm3 6 0>, + <&gpm3 7 0>; + + s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo3_reg: LDO3 { + regulator-name = "VDDIOAP_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo4_reg: LDO4 { + regulator-name = "VDDQ_PRE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD18_2M"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD10_MIPI"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD33_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD18_MIPI"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD33_UOTG"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDIOPERI_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB02"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_USH"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo17_reg: LDO17 { + regulator-name = "VDDIOAP_MMC012_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo18_reg: LDO18 { + regulator-name = "VDDIOPERI_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo19_reg: LDO19 { + regulator-name = "DVDD25"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo20_reg: LDO20 { + regulator-name = "VDD28_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD28_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo22_reg: LDO22 { + regulator-name = "VDDA28_2M"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo23_reg: LDO23 { + regulator-name = "VDD28_TF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo24_reg: LDO24 { + regulator-name = "VDD33_A31"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo25_reg: LDO25 { + regulator-name = "VDD18_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo26_reg: LDO26 { + regulator-name = "VDD18_A31"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo27_reg: LDO27 { + regulator-name = "GPS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo28_reg: LDO28 { + regulator-name = "DVDD12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_m12"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd12_5m"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck9_reg: BUCK9 { + regulator-name = "vddf28_emmc"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + }; + }; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index f05bf575cc45..874beeaef99d 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -27,6 +27,19 @@ bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; }; + sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + status = "okay"; + }; + + codec@13400000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; + }; + serial@13800000 { status = "okay"; }; @@ -42,4 +55,16 @@ serial@13830000 { status = "okay"; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index d7dfe312772a..d75c047e80a9 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -25,4 +25,30 @@ gic:interrupt-controller@10490000 { cpu-offset = <0x4000>; }; + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>, <6 0>, <7 0>; + clocks = <&clock 3>, <&clock 344>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &gic 0 57 0>, + <0x1 0 &combiner 12 5>, + <0x2 0 &combiner 12 6>, + <0x3 0 &combiner 12 7>, + <0x4 0 &gic 1 12 0>, + <0x5 0 &gic 1 12 0>, + <0x6 0 &gic 1 12 0>, + <0x7 0 &gic 1 12 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 9a8780694909..7496b8d633ea 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -36,6 +36,12 @@ <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>; }; + clock: clock-controller@0x10030000 { + compatible = "samsung,exynos4412-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos4x12-pinctrl"; reg = <0x11400000 0x1000>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts new file mode 100644 index 000000000000..5de019cb0e58 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -0,0 +1,129 @@ +/* + * Samsung's Exynos5250 based Arndale board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos5250.dtsi" + +/ { + model = "Insignal Arndale evaluation board based on EXYNOS5250"; + compatible = "insignal,arndale", "samsung,exynos5250"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200"; + }; + + i2c@12C60000 { + status = "disabled"; + }; + + i2c@12C70000 { + status = "disabled"; + }; + + i2c@12C80000 { + status = "disabled"; + }; + + i2c@12C90000 { + status = "disabled"; + }; + + i2c@12CA0000 { + status = "disabled"; + }; + + i2c@12CB0000 { + status = "disabled"; + }; + + i2c@12CC0000 { + status = "disabled"; + }; + + i2c@12CD0000 { + status = "disabled"; + }; + + i2c@121D0000 { + status = "disabled"; + }; + + dwmmc_0: dwmmc0@12200000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, + <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, + <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>, + <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, + <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>; + }; + }; + + dwmmc_1: dwmmc1@12210000 { + status = "disabled"; + }; + + dwmmc_2: dwmmc2@12220000 { + num-slots = <1>; + supports-highspeed; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <4>; + samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; + gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, + <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, + <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>; + }; + }; + + dwmmc_3: dwmmc3@12230000 { + status = "disabled"; + }; + + spi_0: spi@12d20000 { + status = "disabled"; + }; + + spi_1: spi@12d30000 { + status = "disabled"; + }; + + spi_2: spi@12d40000 { + status = "disabled"; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 1b8d4106d338..872ae1f93c75 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -231,4 +231,24 @@ samsung,i2s-controller = <&i2s0>; samsung,audio-codec = <&wm8994>; }; + + usb@12110000 { + samsung,vbus-gpio = <&gpx2 6 1 3 3>; + }; + + dp-controller { + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 17dd951c1cd2..babd9f9b1bf9 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -40,4 +40,15 @@ <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>; }; }; + + usb@12110000 { + samsung,vbus-gpio = <&gpx1 1 1 3 3>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index b1ac73e21c80..28758e5dd15c 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -46,6 +46,22 @@ i2c8 = &i2c_8; }; + pd_gsc: gsc-power-domain@0x10044000 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044000 0x20>; + }; + + pd_mfc: mfc-power-domain@0x10044040 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044040 0x20>; + }; + + clock: clock-controller@0x10010000 { + compatible = "samsung,exynos5250-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + gic:interrupt-controller@10481000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -69,58 +85,106 @@ <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; }; + mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0x800>; + interrupt-controller; + #interrups-cells = <2>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + clocks = <&clock 1>, <&clock 335>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &combiner 23 3>, + <0x1 0 &combiner 23 4>, + <0x2 0 &combiner 25 2>, + <0x3 0 &combiner 25 3>, + <0x4 0 &gic 0 120 0>, + <0x5 0 &gic 0 121 0>; + }; + }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupt-parent = <&combiner>; + interrupts = <1 2>, <22 4>; + }; + watchdog { compatible = "samsung,s3c2410-wdt"; reg = <0x101D0000 0x100>; interrupts = <0 42 0>; + clocks = <&clock 336>; + clock-names = "watchdog"; }; codec@11000000 { compatible = "samsung,mfc-v6"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; + samsung,power-domain = <&pd_mfc>; }; rtc { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; interrupts = <0 43 0>, <0 44 0>; + clocks = <&clock 337>; + clock-names = "rtc"; + status = "disabled"; }; tmu@10060000 { compatible = "samsung,exynos5250-tmu"; reg = <0x10060000 0x100>; interrupts = <0 65 0>; + clocks = <&clock 338>; + clock-names = "tmu_apbif"; }; serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; interrupts = <0 51 0>; + clocks = <&clock 289>, <&clock 146>; + clock-names = "uart", "clk_uart_baud0"; }; serial@12C10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; interrupts = <0 52 0>; + clocks = <&clock 290>, <&clock 147>; + clock-names = "uart", "clk_uart_baud0"; }; serial@12C20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; interrupts = <0 53 0>; + clocks = <&clock 291>, <&clock 148>; + clock-names = "uart", "clk_uart_baud0"; }; serial@12C30000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; interrupts = <0 54 0>; + clocks = <&clock 292>, <&clock 149>; + clock-names = "uart", "clk_uart_baud0"; }; sata@122F0000 { compatible = "samsung,exynos5-sata-ahci"; reg = <0x122F0000 0x1ff>; interrupts = <0 115 0>; + clocks = <&clock 277>, <&clock 143>; + clock-names = "sata", "sclk_sata"; }; sata-phy@12170000 { @@ -134,6 +198,8 @@ interrupts = <0 56 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 294>; + clock-names = "i2c"; }; i2c_1: i2c@12C70000 { @@ -142,6 +208,8 @@ interrupts = <0 57 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 295>; + clock-names = "i2c"; }; i2c_2: i2c@12C80000 { @@ -150,6 +218,8 @@ interrupts = <0 58 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 296>; + clock-names = "i2c"; }; i2c_3: i2c@12C90000 { @@ -158,6 +228,8 @@ interrupts = <0 59 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 297>; + clock-names = "i2c"; }; i2c_4: i2c@12CA0000 { @@ -166,6 +238,8 @@ interrupts = <0 60 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 298>; + clock-names = "i2c"; }; i2c_5: i2c@12CB0000 { @@ -174,6 +248,8 @@ interrupts = <0 61 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 299>; + clock-names = "i2c"; }; i2c_6: i2c@12CC0000 { @@ -182,6 +258,8 @@ interrupts = <0 62 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 300>; + clock-names = "i2c"; }; i2c_7: i2c@12CD0000 { @@ -190,6 +268,8 @@ interrupts = <0 63 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 301>; + clock-names = "i2c"; }; i2c_8: i2c@12CE0000 { @@ -198,6 +278,8 @@ interrupts = <0 64 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 302>; + clock-names = "i2c"; }; i2c@121D0000 { @@ -205,6 +287,8 @@ reg = <0x121D0000 0x100>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 288>; + clock-names = "i2c"; }; spi_0: spi@12d20000 { @@ -216,6 +300,8 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 304>, <&clock 154>; + clock-names = "spi", "spi_busclk0"; }; spi_1: spi@12d30000 { @@ -227,6 +313,8 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 305>, <&clock 155>; + clock-names = "spi", "spi_busclk0"; }; spi_2: spi@12d40000 { @@ -238,6 +326,8 @@ dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 306>, <&clock 156>; + clock-names = "spi", "spi_busclk0"; }; dwmmc_0: dwmmc0@12200000 { @@ -246,6 +336,8 @@ interrupts = <0 75 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 280>, <&clock 139>; + clock-names = "biu", "ciu"; }; dwmmc_1: dwmmc1@12210000 { @@ -254,6 +346,8 @@ interrupts = <0 76 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 281>, <&clock 140>; + clock-names = "biu", "ciu"; }; dwmmc_2: dwmmc2@12220000 { @@ -262,6 +356,8 @@ interrupts = <0 77 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 282>, <&clock 141>; + clock-names = "biu", "ciu"; }; dwmmc_3: dwmmc3@12230000 { @@ -270,6 +366,8 @@ interrupts = <0 78 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 283>, <&clock 142>; + clock-names = "biu", "ciu"; }; i2s0: i2s@03830000 { @@ -301,6 +399,18 @@ dma-names = "tx", "rx"; }; + usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <0 71 0>; + }; + + usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <0 71 0>; + }; + amba { #address-cells = <1>; #size-cells = <1>; @@ -312,6 +422,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; interrupts = <0 34 0>; + clocks = <&clock 275>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -321,6 +433,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; interrupts = <0 35 0>; + clocks = <&clock 276>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -330,6 +444,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x10800000 0x1000>; interrupts = <0 33 0>; + clocks = <&clock 271>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <1>; @@ -339,6 +455,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; interrupts = <0 124 0>; + clocks = <&clock 271>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <1>; @@ -592,34 +710,51 @@ }; }; + gsc_0: gsc@0x13e00000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; interrupts = <0 85 0>; + samsung,power-domain = <&pd_gsc>; + clocks = <&clock 256>; + clock-names = "gscl"; }; gsc_1: gsc@0x13e10000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; interrupts = <0 86 0>; + samsung,power-domain = <&pd_gsc>; + clocks = <&clock 257>; + clock-names = "gscl"; }; gsc_2: gsc@0x13e20000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e20000 0x1000>; interrupts = <0 87 0>; + samsung,power-domain = <&pd_gsc>; + clocks = <&clock 258>; + clock-names = "gscl"; }; gsc_3: gsc@0x13e30000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e30000 0x1000>; interrupts = <0 88 0>; + samsung,power-domain = <&pd_gsc>; + clocks = <&clock 259>; + clock-names = "gscl"; }; hdmi { compatible = "samsung,exynos5-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; + clocks = <&clock 333>, <&clock 136>, <&clock 137>, + <&clock 333>, <&clock 333>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", + "sclk_hdmiphy", "hdmiphy"; }; mixer { @@ -627,4 +762,18 @@ reg = <0x14450000 0x10000>; interrupts = <0 94 0>; }; + + dp-controller { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x1000>; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + #address-cells = <1>; + #size-cells = <0>; + + dptx-phy { + reg = <0x10040720>; + samsung,enable-mask = <1>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index 81e2c964a900..a21eb4cbe893 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -28,19 +28,10 @@ status = "disabled"; }; - i2c@F0000 { - status = "disabled"; - }; - - i2c@100000 { - status = "disabled"; - }; - - watchdog { - status = "disabled"; - }; - - rtc { - status = "disabled"; + fixed-rate-clocks { + xtal { + compatible = "samsung,clock-xtal"; + clock-frequency = <50000000>; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 9a99755920c0..48cc96aa0b5f 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -16,6 +16,12 @@ interrupt-parent = <&gic>; + clock: clock-controller@0x160000 { + compatible = "samsung,exynos5440-clock"; + reg = <0x160000 0x1000>; + #clock-cells = <1>; + }; + gic:interrupt-controller@2E0000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; @@ -24,55 +30,51 @@ }; cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>; - clock-frequency = <1000000>; - }; + reg = <0>; }; cpu@1 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 14 0xf08>; - clock-frequency = <1000000>; - }; + reg = <1>; }; cpu@2 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 14 0xf08>; - clock-frequency = <1000000>; - }; + reg = <2>; }; cpu@3 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 14 0xf08>; - clock-frequency = <1000000>; - }; + reg = <3>; }; }; - common { - compatible = "samsung,exynos5440"; - + timer { + compatible = "arm,cortex-a15-timer", + "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + clock-frequency = <50000000>; }; serial@B0000 { compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; interrupts = <0 2 0>; + clocks = <&clock 21>, <&clock 21>; + clock-names = "uart", "clk_uart_baud0"; }; serial@C0000 { compatible = "samsung,exynos4210-uart"; reg = <0xC0000 0x1000>; interrupts = <0 3 0>; + clocks = <&clock 21>, <&clock 21>; + clock-names = "uart", "clk_uart_baud0"; }; spi { @@ -83,6 +85,8 @@ rx-dma-channel = <&pdma0 4>; /* preliminary */ #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 21>, <&clock 16>; + clock-names = "spi", "spi_busclk0"; }; pinctrl { @@ -110,25 +114,31 @@ }; i2c@F0000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos5440-i2c"; reg = <0xF0000 0x1000>; interrupts = <0 5 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 21>; + clock-names = "i2c"; }; i2c@100000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos5440-i2c"; reg = <0x100000 0x1000>; interrupts = <0 6 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clock 21>; + clock-names = "i2c"; }; watchdog { compatible = "samsung,s3c2410-wdt"; reg = <0x110000 0x1000>; interrupts = <0 1 0>; + clocks = <&clock 21>; + clock-names = "watchdog"; }; amba { @@ -142,6 +152,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x120000 0x1000>; interrupts = <0 34 0>; + clocks = <&clock 21>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -151,6 +163,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x121000 0x1000>; interrupts = <0 35 0>; + clocks = <&clock 21>; + clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -161,5 +175,8 @@ compatible = "samsung,s3c6410-rtc"; reg = <0x130000 0x1000>; interrupts = <0 17 0>, <0 16 0>; + clocks = <&clock 21>; + clock-names = "rtc"; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index f624dc85d441..02d23f15fd86 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -38,6 +38,57 @@ }; }; + /* HS USB Port 2 RESET */ + hsusb2_reset: hsusb2_reset_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_reset"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 19 0>; /* gpio_147 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-supply = <&hsusb2_reset>; + vcc-supply = <&hsusb2_power>; + }; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + >; + + hsusbb2_pins: pinmux_hsusbb2_pins { + pinctrl-single,pins = < + 0x5c0 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */ + 0x5c2 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */ + 0x5c4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */ + 0x5c6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */ + 0x5c8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */ + 0x5cA 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */ + 0x1a4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */ + 0x1a6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */ + 0x1a8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */ + 0x1aa 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */ + 0x1ac 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */ + 0x1ae 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */ + >; + }; }; &i2c1 { @@ -65,3 +116,23 @@ &mmc3 { status = "disabled"; }; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 1acc26148ffc..a14f74bbce7c 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -397,5 +397,36 @@ ti,timer-alwon; ti,timer-secure; }; + + usbhstll: usbhstll@48062000 { + compatible = "ti,usbhs-tll"; + reg = <0x48062000 0x1000>; + interrupts = <78>; + ti,hwmods = "usb_tll_hs"; + }; + + usbhshost: usbhshost@48064000 { + compatible = "ti,usbhs-host"; + reg = <0x48064000 0x400>; + ti,hwmods = "usb_host_hs"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbhsohci: ohci@48064400 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x48064400 0x400>; + interrupt-parent = <&intc>; + interrupts = <76>; + }; + + usbhsehci: ehci@48064800 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x48064800 0x400>; + interrupt-parent = <&intc>; + interrupts = <77>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 739bb79e410e..b7db1a2b6ca7 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -529,5 +529,35 @@ ti,hwmods = "timer11"; ti,timer-pwm; }; + + usbhstll: usbhstll@4a062000 { + compatible = "ti,usbhs-tll"; + reg = <0x4a062000 0x1000>; + interrupts = <0 78 0x4>; + ti,hwmods = "usb_tll_hs"; + }; + + usbhshost: usbhshost@4a064000 { + compatible = "ti,usbhs-host"; + reg = <0x4a064000 0x800>; + ti,hwmods = "usb_host_hs"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbhsohci: ohci@4a064800 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x4a064800 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 76 0x4>; + }; + + usbhsehci: ehci@4a064c00 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x4a064c00 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 77 0x4>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 6ebc1b704190..616990dc92db 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -12,7 +12,6 @@ serial@70006300 { status = "okay"; - clock-frequency = <408000000>; }; pmc { diff --git a/arch/arm/boot/dts/tegra114-pluto.dts b/arch/arm/boot/dts/tegra114-pluto.dts index 5deb8692b350..6bbc8efae9c0 100644 --- a/arch/arm/boot/dts/tegra114-pluto.dts +++ b/arch/arm/boot/dts/tegra114-pluto.dts @@ -12,7 +12,6 @@ serial@70006300 { status = "okay"; - clock-frequency = <408000000>; }; pmc { diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index c0b527d15fda..c1110a9b2a91 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -24,10 +24,11 @@ 0 42 0x04 0 121 0x04 0 122 0x04>; + clocks = <&tegra_car 5>; }; tegra_car: clock { - compatible = "nvidia,tegra114-car, nvidia,tegra30-car"; + compatible = "nvidia,tegra114-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; }; @@ -66,6 +67,7 @@ reg-shift = <2>; interrupts = <0 36 0x04>; status = "disabled"; + clocks = <&tegra_car 6>; }; serial@70006040 { @@ -74,6 +76,7 @@ reg-shift = <2>; interrupts = <0 37 0x04>; status = "disabled"; + clocks = <&tegra_car 192>; }; serial@70006200 { @@ -82,6 +85,7 @@ reg-shift = <2>; interrupts = <0 46 0x04>; status = "disabled"; + clocks = <&tegra_car 55>; }; serial@70006300 { @@ -90,12 +94,14 @@ reg-shift = <2>; interrupts = <0 90 0x04>; status = "disabled"; + clocks = <&tegra_car 65>; }; rtc { compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <0 2 0x04>; + clocks = <&tegra_car 4>; }; pmc { diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi index 68c8dc644383..4a4b96f6827e 100644 --- a/arch/arm/boot/dts/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -25,11 +25,13 @@ #interrupt-cells = <1>; }; - gpio: gpio-controller@d8110000 { - compatible = "via,vt8500-gpio"; - gpio-controller; + pinctrl: pinctrl@d8110000 { + compatible = "via,vt8500-pinctrl"; reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; pmc@d8130000 { diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index 398b8bca791e..b2bf359e852f 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -40,11 +40,13 @@ interrupts = <56 57 58 59 60 61 62 63>; }; - gpio: gpio-controller@d8110000 { - compatible = "wm,wm8505-gpio"; - gpio-controller; + pinctrl: pinctrl@d8110000 { + compatible = "wm,wm8505-pinctrl"; reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; pmc@d8130000 { diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index 9313407bbc30..dd8464eeb40d 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -34,11 +34,13 @@ interrupts = <56 57 58 59 60 61 62 63>; }; - gpio: gpio-controller@d8110000 { - compatible = "wm,wm8650-gpio"; - gpio-controller; + pinctrl: pinctrl@d8110000 { + compatible = "wm,wm8650-pinctrl"; reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; pmc@d8130000 { diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi index 7149cd13e3b9..fc790d0aee66 100644 --- a/arch/arm/boot/dts/wm8850.dtsi +++ b/arch/arm/boot/dts/wm8850.dtsi @@ -41,11 +41,13 @@ interrupts = <56 57 58 59 60 61 62 63>; }; - gpio: gpio-controller@d8110000 { - compatible = "wm,wm8650-gpio"; - gpio-controller; + pinctrl: pinctrl@d8110000 { + compatible = "wm,wm8850-pinctrl"; reg = <0xd8110000 0x10000>; - #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; }; pmc@d8130000 { diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 9e1c339c4491..748fc347ed18 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -118,56 +118,23 @@ }; ttc0: ttc0@f8001000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "xlnx,ttc"; + interrupt-parent = <&intc>; + interrupts = < 0 10 4 0 11 4 0 12 4 >; + compatible = "cdns,ttc"; reg = <0xF8001000 0x1000>; clocks = <&cpu_clk 3>; clock-names = "cpu_1x"; clock-ranges; - - ttc0_0: ttc0.0 { - status = "disabled"; - reg = <0>; - interrupts = <0 10 4>; - }; - ttc0_1: ttc0.1 { - status = "disabled"; - reg = <1>; - interrupts = <0 11 4>; - }; - ttc0_2: ttc0.2 { - status = "disabled"; - reg = <2>; - interrupts = <0 12 4>; - }; }; ttc1: ttc1@f8002000 { - #interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <0>; - compatible = "xlnx,ttc"; + interrupt-parent = <&intc>; + interrupts = < 0 37 4 0 38 4 0 39 4 >; + compatible = "cdns,ttc"; reg = <0xF8002000 0x1000>; clocks = <&cpu_clk 3>; clock-names = "cpu_1x"; clock-ranges; - - ttc1_0: ttc1.0 { - status = "disabled"; - reg = <0>; - interrupts = <0 37 4>; - }; - ttc1_1: ttc1.1 { - status = "disabled"; - reg = <1>; - interrupts = <0 38 4>; - }; - ttc1_2: ttc1.2 { - status = "disabled"; - reg = <2>; - interrupts = <0 39 4>; - }; }; }; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index c772942a399a..86f44d5b0265 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -32,13 +32,3 @@ &ps_clk { clock-frequency = <33333330>; }; - -&ttc0_0 { - status = "ok"; - compatible = "xlnx,ttc-counter-clocksource"; -}; - -&ttc0_1 { - status = "ok"; - compatible = "xlnx,ttc-counter-clockevent"; -}; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index ac7a341bd0ff..25efb5ac30f1 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -169,6 +169,8 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "at91sam9261-lcdfb.0", &hck1), + CLKDEV_CON_DEV_ID("hclk", "at91sam9g10-lcdfb.0", &hck1), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 92e0f861084a..629ea5fc95cf 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -488,7 +488,6 @@ static struct resource lcdc_resources[] = { }; static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", .id = 0, .dev = { .dma_mask = &lcdc_dmamask, @@ -505,6 +504,11 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) return; } + if (cpu_is_at91sam9g10()) + at91_lcdc_device.name = "at91sam9g10-lcdfb"; + else + at91_lcdc_device.name = "at91sam9261-lcdfb"; + #if defined(CONFIG_FB_ATMEL_STN) at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 8e2d9f4a9a45..f44ffd2105a7 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -190,6 +190,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk), + CLKDEV_CON_DEV_ID("hclk", "at91sam9263-lcdfb.0", &lcdc_clk), CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ed666f5cb01d..858c8aac2daf 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -848,7 +848,7 @@ static struct resource lcdc_resources[] = { }; static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", + .name = "at91sam9263-lcdfb", .id = 0, .dev = { .dma_mask = &lcdc_dmamask, diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index a6c224fc9542..8b7fce067652 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -228,6 +228,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("hclk", &macb_clk), /* One additional fake clock for ohci */ CLKDEV_CON_ID("ohci_clk", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "at91sam9g45-lcdfb.0", &lcdc_clk), + CLKDEV_CON_DEV_ID("hclk", "at91sam9g45es-lcdfb.0", &lcdc_clk), CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk), CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index f0bf68268ca2..acb703e13331 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -981,7 +981,6 @@ static struct resource lcdc_resources[] = { }; static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", .id = 0, .dev = { .dma_mask = &lcdc_dmamask, @@ -997,6 +996,11 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) if (!data) return; + if (cpu_is_at91sam9g45es()) + at91_lcdc_device.name = "at91sam9g45es-lcdfb"; + else + at91_lcdc_device.name = "at91sam9g45-lcdfb"; + at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */ diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index c39600764236..f77fae5591bc 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -179,6 +179,7 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "at91sam9rl-lcdfb.0", &lcdc_clk), CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index ddf223ff35c4..352468f265a9 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -514,7 +514,7 @@ static struct resource lcdc_resources[] = { }; static struct platform_device at91_lcdc_device = { - .name = "atmel_lcdfb", + .name = "at91sam9rl-lcdfb", .id = 0, .dev = { .dma_mask = &lcdc_dmamask, diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index f22f69e2d081..d19edff0ea6e 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -63,6 +63,7 @@ config SOC_EXYNOS5250 bool "SAMSUNG EXYNOS5250" default y depends on ARCH_EXYNOS5 + select PM_GENERIC_DOMAINS if PM select S5P_PM if PM select S5P_SLEEP if PM select S5P_DEV_MFC @@ -83,12 +84,6 @@ config SOC_EXYNOS5440 help Enable EXYNOS5440 SoC support -config EXYNOS4_MCT - bool - default y - help - Use MCT (Multi Core Timer) as kernel timers - config EXYNOS_ATAGS bool "ATAGS based boot for EXYNOS (deprecated)" depends on !ARCH_MULTIPLATFORM @@ -285,8 +280,8 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_ONENAND select S5P_DEV_TV select S5P_GPIO_INT - select S5P_HRT select S5P_SETUP_MIPIPHY + select SAMSUNG_HRT help Machine support for Samsung Mobile Universal S5PC210 Reference Board. @@ -414,10 +409,12 @@ config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" depends on ARCH_EXYNOS4 select ARM_AMBA + select CLKSRC_OF select CPU_EXYNOS4210 select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select PINCTRL select PINCTRL_EXYNOS + select S5P_DEV_MFC select USE_OF help Machine support for Samsung Exynos4 machine with device tree enabled. @@ -430,6 +427,7 @@ config MACH_EXYNOS5_DT default y depends on ARCH_EXYNOS5 select ARM_AMBA + select CLKSRC_OF select USE_OF help Machine support for Samsung EXYNOS5 machine with device tree enabled. diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 435757e57bb4..d2f6b362b6dd 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -13,10 +13,6 @@ obj- := # Core obj-$(CONFIG_ARCH_EXYNOS) += common.o -obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o -obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o -obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o -obj-$(CONFIG_SOC_EXYNOS5250) += clock-exynos5.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o @@ -26,8 +22,6 @@ obj-$(CONFIG_ARCH_EXYNOS) += pmu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_EXYNOS4_MCT) += mct.o - obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o # machine support diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c deleted file mode 100644 index 8a8468d83c8c..000000000000 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ /dev/null @@ -1,1601 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pm.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include "common.h" -#include "clock-exynos4.h" - -#ifdef CONFIG_PM_SLEEP -static struct sleep_save exynos4_clock_save[] = { - SAVE_ITEM(EXYNOS4_CLKDIV_LEFTBUS), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_LEFTBUS), - SAVE_ITEM(EXYNOS4_CLKDIV_RIGHTBUS), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_RIGHTBUS), - SAVE_ITEM(EXYNOS4_CLKSRC_TOP0), - SAVE_ITEM(EXYNOS4_CLKSRC_TOP1), - SAVE_ITEM(EXYNOS4_CLKSRC_CAM), - SAVE_ITEM(EXYNOS4_CLKSRC_TV), - SAVE_ITEM(EXYNOS4_CLKSRC_MFC), - SAVE_ITEM(EXYNOS4_CLKSRC_G3D), - SAVE_ITEM(EXYNOS4_CLKSRC_LCD0), - SAVE_ITEM(EXYNOS4_CLKSRC_MAUDIO), - SAVE_ITEM(EXYNOS4_CLKSRC_FSYS), - SAVE_ITEM(EXYNOS4_CLKSRC_PERIL0), - SAVE_ITEM(EXYNOS4_CLKSRC_PERIL1), - SAVE_ITEM(EXYNOS4_CLKDIV_CAM), - SAVE_ITEM(EXYNOS4_CLKDIV_TV), - SAVE_ITEM(EXYNOS4_CLKDIV_MFC), - SAVE_ITEM(EXYNOS4_CLKDIV_G3D), - SAVE_ITEM(EXYNOS4_CLKDIV_LCD0), - SAVE_ITEM(EXYNOS4_CLKDIV_MAUDIO), - SAVE_ITEM(EXYNOS4_CLKDIV_FSYS0), - SAVE_ITEM(EXYNOS4_CLKDIV_FSYS1), - SAVE_ITEM(EXYNOS4_CLKDIV_FSYS2), - SAVE_ITEM(EXYNOS4_CLKDIV_FSYS3), - SAVE_ITEM(EXYNOS4_CLKDIV_PERIL0), - SAVE_ITEM(EXYNOS4_CLKDIV_PERIL1), - SAVE_ITEM(EXYNOS4_CLKDIV_PERIL2), - SAVE_ITEM(EXYNOS4_CLKDIV_PERIL3), - SAVE_ITEM(EXYNOS4_CLKDIV_PERIL4), - SAVE_ITEM(EXYNOS4_CLKDIV_PERIL5), - SAVE_ITEM(EXYNOS4_CLKDIV_TOP), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TOP), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_CAM), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TV), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_LCD0), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_MAUDIO), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_FSYS), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL0), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL1), - SAVE_ITEM(EXYNOS4_CLKDIV2_RATIO), - SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCAM), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_CAM), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_TV), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_MFC), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_G3D), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_LCD0), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_FSYS), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_GPS), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_PERIL), - SAVE_ITEM(EXYNOS4_CLKGATE_BLOCK), - SAVE_ITEM(EXYNOS4_CLKSRC_MASK_DMC), - SAVE_ITEM(EXYNOS4_CLKSRC_DMC), - SAVE_ITEM(EXYNOS4_CLKDIV_DMC0), - SAVE_ITEM(EXYNOS4_CLKDIV_DMC1), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_DMC), - SAVE_ITEM(EXYNOS4_CLKSRC_CPU), - SAVE_ITEM(EXYNOS4_CLKDIV_CPU), - SAVE_ITEM(EXYNOS4_CLKDIV_CPU + 0x4), - SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCPU), - SAVE_ITEM(EXYNOS4_CLKGATE_IP_CPU), -}; -#endif - -static struct clk exynos4_clk_sclk_hdmi27m = { - .name = "sclk_hdmi27m", - .rate = 27000000, -}; - -static struct clk exynos4_clk_sclk_hdmiphy = { - .name = "sclk_hdmiphy", -}; - -static struct clk exynos4_clk_sclk_usbphy0 = { - .name = "sclk_usbphy0", - .rate = 27000000, -}; - -static struct clk exynos4_clk_sclk_usbphy1 = { - .name = "sclk_usbphy1", -}; - -static struct clk dummy_apb_pclk = { - .name = "apb_pclk", - .id = -1, -}; - -static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TOP, clk, enable); -} - -static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_CAM, clk, enable); -} - -static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_LCD0, clk, enable); -} - -int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_FSYS, clk, enable); -} - -static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL0, clk, enable); -} - -static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL1, clk, enable); -} - -static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_MFC, clk, enable); -} - -static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TV, clk, enable); -} - -static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_CAM, clk, enable); -} - -static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable); -} - -int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable); -} - -static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_LCD0, clk, enable); -} - -int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4210_CLKGATE_IP_LCD1, clk, enable); -} - -int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_FSYS, clk, enable); -} - -static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIL, clk, enable); -} - -static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable); -} - -int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_DMC, clk, enable); -} - -static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); -} - -static int exynos4_clk_dac_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable); -} - -/* Core list of CMU_CPU side */ - -static struct clksrc_clk exynos4_clk_mout_apll = { - .clk = { - .name = "mout_apll", - }, - .sources = &clk_src_apll, - .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_apll = { - .clk = { - .name = "sclk_apll", - .parent = &exynos4_clk_mout_apll.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 24, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_mout_epll = { - .clk = { - .name = "mout_epll", - }, - .sources = &clk_src_epll, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 4, .size = 1 }, -}; - -struct clksrc_clk exynos4_clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - }, - .sources = &clk_src_mpll, - - /* reg_src will be added in each SoCs' clock */ -}; - -static struct clk *exynos4_clkset_moutcore_list[] = { - [0] = &exynos4_clk_mout_apll.clk, - [1] = &exynos4_clk_mout_mpll.clk, -}; - -static struct clksrc_sources exynos4_clkset_moutcore = { - .sources = exynos4_clkset_moutcore_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_moutcore_list), -}; - -static struct clksrc_clk exynos4_clk_moutcore = { - .clk = { - .name = "moutcore", - }, - .sources = &exynos4_clkset_moutcore, - .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 16, .size = 1 }, -}; - -static struct clksrc_clk exynos4_clk_coreclk = { - .clk = { - .name = "core_clk", - .parent = &exynos4_clk_moutcore.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_armclk = { - .clk = { - .name = "armclk", - .parent = &exynos4_clk_coreclk.clk, - }, -}; - -static struct clksrc_clk exynos4_clk_aclk_corem0 = { - .clk = { - .name = "aclk_corem0", - .parent = &exynos4_clk_coreclk.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_cores = { - .clk = { - .name = "aclk_cores", - .parent = &exynos4_clk_coreclk.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_corem1 = { - .clk = { - .name = "aclk_corem1", - .parent = &exynos4_clk_coreclk.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 8, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_periphclk = { - .clk = { - .name = "periphclk", - .parent = &exynos4_clk_coreclk.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 12, .size = 3 }, -}; - -/* Core list of CMU_CORE side */ - -static struct clk *exynos4_clkset_corebus_list[] = { - [0] = &exynos4_clk_mout_mpll.clk, - [1] = &exynos4_clk_sclk_apll.clk, -}; - -struct clksrc_sources exynos4_clkset_mout_corebus = { - .sources = exynos4_clkset_corebus_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_corebus_list), -}; - -static struct clksrc_clk exynos4_clk_mout_corebus = { - .clk = { - .name = "mout_corebus", - }, - .sources = &exynos4_clkset_mout_corebus, - .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_dmc = { - .clk = { - .name = "sclk_dmc", - .parent = &exynos4_clk_mout_corebus.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 12, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_cored = { - .clk = { - .name = "aclk_cored", - .parent = &exynos4_clk_sclk_dmc.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 16, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_corep = { - .clk = { - .name = "aclk_corep", - .parent = &exynos4_clk_aclk_cored.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 20, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_acp = { - .clk = { - .name = "aclk_acp", - .parent = &exynos4_clk_mout_corebus.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_pclk_acp = { - .clk = { - .name = "pclk_acp", - .parent = &exynos4_clk_aclk_acp.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 4, .size = 3 }, -}; - -/* Core list of CMU_TOP side */ - -struct clk *exynos4_clkset_aclk_top_list[] = { - [0] = &exynos4_clk_mout_mpll.clk, - [1] = &exynos4_clk_sclk_apll.clk, -}; - -static struct clksrc_sources exynos4_clkset_aclk = { - .sources = exynos4_clkset_aclk_top_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_aclk_top_list), -}; - -static struct clksrc_clk exynos4_clk_aclk_200 = { - .clk = { - .name = "aclk_200", - }, - .sources = &exynos4_clkset_aclk, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 12, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_100 = { - .clk = { - .name = "aclk_100", - }, - .sources = &exynos4_clkset_aclk, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 16, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_aclk_160 = { - .clk = { - .name = "aclk_160", - }, - .sources = &exynos4_clkset_aclk, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 20, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 8, .size = 3 }, -}; - -struct clksrc_clk exynos4_clk_aclk_133 = { - .clk = { - .name = "aclk_133", - }, - .sources = &exynos4_clkset_aclk, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 24, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 12, .size = 3 }, -}; - -static struct clk *exynos4_clkset_vpllsrc_list[] = { - [0] = &clk_fin_vpll, - [1] = &exynos4_clk_sclk_hdmi27m, -}; - -static struct clksrc_sources exynos4_clkset_vpllsrc = { - .sources = exynos4_clkset_vpllsrc_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_vpllsrc_list), -}; - -static struct clksrc_clk exynos4_clk_vpllsrc = { - .clk = { - .name = "vpll_src", - .enable = exynos4_clksrc_mask_top_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos4_clkset_vpllsrc, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP1, .shift = 0, .size = 1 }, -}; - -static struct clk *exynos4_clkset_sclk_vpll_list[] = { - [0] = &exynos4_clk_vpllsrc.clk, - [1] = &clk_fout_vpll, -}; - -static struct clksrc_sources exynos4_clkset_sclk_vpll = { - .sources = exynos4_clkset_sclk_vpll_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_vpll_list), -}; - -static struct clksrc_clk exynos4_clk_sclk_vpll = { - .clk = { - .name = "sclk_vpll", - }, - .sources = &exynos4_clkset_sclk_vpll, - .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 8, .size = 1 }, -}; - -static struct clk exynos4_init_clocks_off[] = { - { - .name = "timers", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1<<24), - }, { - .name = "csis", - .devname = "s5p-mipi-csis.0", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "csis", - .devname = "s5p-mipi-csis.1", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "jpeg", - .id = 0, - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "fimc", - .devname = "exynos4-fimc.0", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "fimc", - .devname = "exynos4-fimc.1", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "fimc", - .devname = "exynos4-fimc.2", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "fimc", - .devname = "exynos4-fimc.3", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "tsi", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "hsmmc", - .devname = "exynos4-sdhci.0", - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "hsmmc", - .devname = "exynos4-sdhci.1", - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "hsmmc", - .devname = "exynos4-sdhci.2", - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "hsmmc", - .devname = "exynos4-sdhci.3", - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "biu", - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "onenand", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "nfcon", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "dac", - .devname = "s5p-sdo", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "mixer", - .devname = "s5p-mixer", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "vp", - .devname = "s5p-mixer", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "hdmi", - .devname = "exynos4-hdmi", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "hdmiphy", - .devname = "exynos4-hdmi", - .enable = exynos4_clk_hdmiphy_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "dacphy", - .devname = "s5p-sdo", - .enable = exynos4_clk_dac_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "adc", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "tmu_apbif", - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "keypad", - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "rtc", - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "watchdog", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_perir_ctrl, - .ctrlbit = (1 << 14), - }, { - .name = "usbhost", - .enable = exynos4_clk_ip_fsys_ctrl , - .ctrlbit = (1 << 12), - }, { - .name = "otg", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "spi", - .devname = "exynos4210-spi.0", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "spi", - .devname = "exynos4210-spi.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "spi", - .devname = "exynos4210-spi.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "iis", - .devname = "samsung-i2s.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 20), - }, { - .name = "iis", - .devname = "samsung-i2s.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "pcm", - .devname = "samsung-pcm.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "pcm", - .devname = "samsung-pcm.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 23), - }, { - .name = "slimbus", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "spdif", - .devname = "samsung-spdif", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 26), - }, { - .name = "ac97", - .devname = "samsung-ac97", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 27), - }, { - .name = "mfc", - .devname = "s5p-mfc", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.2", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.3", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.4", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.5", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.6", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.7", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "i2c", - .devname = "s3c2440-hdmiphy-i2c", - .parent = &exynos4_clk_aclk_100.clk, - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 14), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.0", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.1", - .enable = exynos4_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.2", - .enable = exynos4_clk_ip_tv_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.3", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.4", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.5", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.6", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.7", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.8", - .enable = exynos4_clk_ip_cam_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.10", - .enable = exynos4_clk_ip_lcd0_ctrl, - .ctrlbit = (1 << 4), - } -}; - -static struct clk exynos4_init_clocks_on[] = { - { - .name = "uart", - .devname = "s5pv210-uart.0", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "uart", - .devname = "s5pv210-uart.1", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "uart", - .devname = "s5pv210-uart.2", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "uart", - .devname = "s5pv210-uart.3", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "uart", - .devname = "s5pv210-uart.4", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "uart", - .devname = "s5pv210-uart.5", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 5), - } -}; - -static struct clk exynos4_clk_pdma0 = { - .name = "dma", - .devname = "dma-pl330.0", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 0), -}; - -static struct clk exynos4_clk_pdma1 = { - .name = "dma", - .devname = "dma-pl330.1", - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 1), -}; - -static struct clk exynos4_clk_mdma1 = { - .name = "dma", - .devname = "dma-pl330.2", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = ((1 << 8) | (1 << 5) | (1 << 2)), -}; - -static struct clk exynos4_clk_fimd0 = { - .name = "fimd", - .devname = "exynos4-fb.0", - .enable = exynos4_clk_ip_lcd0_ctrl, - .ctrlbit = (1 << 0), -}; - -struct clk *exynos4_clkset_group_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = &clk_xusbxti, - [2] = &exynos4_clk_sclk_hdmi27m, - [3] = &exynos4_clk_sclk_usbphy0, - [4] = &exynos4_clk_sclk_usbphy1, - [5] = &exynos4_clk_sclk_hdmiphy, - [6] = &exynos4_clk_mout_mpll.clk, - [7] = &exynos4_clk_mout_epll.clk, - [8] = &exynos4_clk_sclk_vpll.clk, -}; - -struct clksrc_sources exynos4_clkset_group = { - .sources = exynos4_clkset_group_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_group_list), -}; - -static struct clk *exynos4_clkset_mout_g2d0_list[] = { - [0] = &exynos4_clk_mout_mpll.clk, - [1] = &exynos4_clk_sclk_apll.clk, -}; - -struct clksrc_sources exynos4_clkset_mout_g2d0 = { - .sources = exynos4_clkset_mout_g2d0_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d0_list), -}; - -static struct clk *exynos4_clkset_mout_g2d1_list[] = { - [0] = &exynos4_clk_mout_epll.clk, - [1] = &exynos4_clk_sclk_vpll.clk, -}; - -struct clksrc_sources exynos4_clkset_mout_g2d1 = { - .sources = exynos4_clkset_mout_g2d1_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d1_list), -}; - -static struct clk *exynos4_clkset_mout_mfc0_list[] = { - [0] = &exynos4_clk_mout_mpll.clk, - [1] = &exynos4_clk_sclk_apll.clk, -}; - -static struct clksrc_sources exynos4_clkset_mout_mfc0 = { - .sources = exynos4_clkset_mout_mfc0_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc0_list), -}; - -static struct clksrc_clk exynos4_clk_mout_mfc0 = { - .clk = { - .name = "mout_mfc0", - }, - .sources = &exynos4_clkset_mout_mfc0, - .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 0, .size = 1 }, -}; - -static struct clk *exynos4_clkset_mout_mfc1_list[] = { - [0] = &exynos4_clk_mout_epll.clk, - [1] = &exynos4_clk_sclk_vpll.clk, -}; - -static struct clksrc_sources exynos4_clkset_mout_mfc1 = { - .sources = exynos4_clkset_mout_mfc1_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc1_list), -}; - -static struct clksrc_clk exynos4_clk_mout_mfc1 = { - .clk = { - .name = "mout_mfc1", - }, - .sources = &exynos4_clkset_mout_mfc1, - .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 4, .size = 1 }, -}; - -static struct clk *exynos4_clkset_mout_mfc_list[] = { - [0] = &exynos4_clk_mout_mfc0.clk, - [1] = &exynos4_clk_mout_mfc1.clk, -}; - -static struct clksrc_sources exynos4_clkset_mout_mfc = { - .sources = exynos4_clkset_mout_mfc_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc_list), -}; - -static struct clk *exynos4_clkset_sclk_dac_list[] = { - [0] = &exynos4_clk_sclk_vpll.clk, - [1] = &exynos4_clk_sclk_hdmiphy, -}; - -static struct clksrc_sources exynos4_clkset_sclk_dac = { - .sources = exynos4_clkset_sclk_dac_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_dac_list), -}; - -static struct clksrc_clk exynos4_clk_sclk_dac = { - .clk = { - .name = "sclk_dac", - .enable = exynos4_clksrc_mask_tv_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &exynos4_clkset_sclk_dac, - .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 8, .size = 1 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_pixel = { - .clk = { - .name = "sclk_pixel", - .parent = &exynos4_clk_sclk_vpll.clk, - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_TV, .shift = 0, .size = 4 }, -}; - -static struct clk *exynos4_clkset_sclk_hdmi_list[] = { - [0] = &exynos4_clk_sclk_pixel.clk, - [1] = &exynos4_clk_sclk_hdmiphy, -}; - -static struct clksrc_sources exynos4_clkset_sclk_hdmi = { - .sources = exynos4_clkset_sclk_hdmi_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_hdmi_list), -}; - -static struct clksrc_clk exynos4_clk_sclk_hdmi = { - .clk = { - .name = "sclk_hdmi", - .enable = exynos4_clksrc_mask_tv_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos4_clkset_sclk_hdmi, - .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 0, .size = 1 }, -}; - -static struct clk *exynos4_clkset_sclk_mixer_list[] = { - [0] = &exynos4_clk_sclk_dac.clk, - [1] = &exynos4_clk_sclk_hdmi.clk, -}; - -static struct clksrc_sources exynos4_clkset_sclk_mixer = { - .sources = exynos4_clkset_sclk_mixer_list, - .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_mixer_list), -}; - -static struct clksrc_clk exynos4_clk_sclk_mixer = { - .clk = { - .name = "sclk_mixer", - .enable = exynos4_clksrc_mask_tv_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &exynos4_clkset_sclk_mixer, - .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk *exynos4_sclk_tv[] = { - &exynos4_clk_sclk_dac, - &exynos4_clk_sclk_pixel, - &exynos4_clk_sclk_hdmi, - &exynos4_clk_sclk_mixer, -}; - -static struct clksrc_clk exynos4_clk_dout_mmc0 = { - .clk = { - .name = "dout_mmc0", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_dout_mmc1 = { - .clk = { - .name = "dout_mmc1", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 4, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_dout_mmc2 = { - .clk = { - .name = "dout_mmc2", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 8, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_dout_mmc3 = { - .clk = { - .name = "dout_mmc3", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 12, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_dout_mmc4 = { - .clk = { - .name = "dout_mmc4", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clksrcs[] = { - { - .clk = { - .name = "sclk_pwm", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 24, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL3, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_csis", - .devname = "s5p-mipi-csis.0", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 24, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "sclk_csis", - .devname = "s5p-mipi-csis.1", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 28), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 28, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 28, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam0", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam1", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 20, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.0", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.1", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 4, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 4, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.2", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 8, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 8, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimc", - .devname = "exynos4-fimc.3", - .enable = exynos4_clksrc_mask_cam_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 12, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 12, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimd", - .devname = "exynos4-fb.0", - .enable = exynos4_clksrc_mask_lcd0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_LCD0, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_mfc", - .devname = "s5p-mfc", - }, - .sources = &exynos4_clkset_mout_mfc, - .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 8, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_MFC, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "ciu", - .parent = &exynos4_clk_dout_mmc4.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 16), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 8, .size = 8 }, - } -}; - -static struct clksrc_clk exynos4_clk_sclk_uart0 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.0", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_uart1 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.1", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 4, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_uart2 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.2", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 8, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_uart3 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.3", - .enable = exynos4_clksrc_mask_peril0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 12, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 12, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_mmc0 = { - .clk = { - .name = "sclk_mmc", - .devname = "exynos4-sdhci.0", - .parent = &exynos4_clk_dout_mmc0.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 0), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_mmc1 = { - .clk = { - .name = "sclk_mmc", - .devname = "exynos4-sdhci.1", - .parent = &exynos4_clk_dout_mmc1.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 4), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_mmc2 = { - .clk = { - .name = "sclk_mmc", - .devname = "exynos4-sdhci.2", - .parent = &exynos4_clk_dout_mmc2.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 8), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_mmc3 = { - .clk = { - .name = "sclk_mmc", - .devname = "exynos4-sdhci.3", - .parent = &exynos4_clk_dout_mmc3.clk, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 12), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk exynos4_clk_mdout_spi0 = { - .clk = { - .name = "mdout_spi", - .devname = "exynos4210-spi.0", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_mdout_spi1 = { - .clk = { - .name = "mdout_spi", - .devname = "exynos4210-spi.1", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_mdout_spi2 = { - .clk = { - .name = "mdout_spi", - .devname = "exynos4210-spi.2", - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_spi0 = { - .clk = { - .name = "sclk_spi", - .devname = "exynos4210-spi.0", - .parent = &exynos4_clk_mdout_spi0.clk, - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 16), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_spi1 = { - .clk = { - .name = "sclk_spi", - .devname = "exynos4210-spi.1", - .parent = &exynos4_clk_mdout_spi1.clk, - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 20), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk exynos4_clk_sclk_spi2 = { - .clk = { - .name = "sclk_spi", - .devname = "exynos4210-spi.2", - .parent = &exynos4_clk_mdout_spi2.clk, - .enable = exynos4_clksrc_mask_peril1_ctrl, - .ctrlbit = (1 << 24), - }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 8, .size = 8 }, -}; - -/* Clock initialization code */ -static struct clksrc_clk *exynos4_sysclks[] = { - &exynos4_clk_mout_apll, - &exynos4_clk_sclk_apll, - &exynos4_clk_mout_epll, - &exynos4_clk_mout_mpll, - &exynos4_clk_moutcore, - &exynos4_clk_coreclk, - &exynos4_clk_armclk, - &exynos4_clk_aclk_corem0, - &exynos4_clk_aclk_cores, - &exynos4_clk_aclk_corem1, - &exynos4_clk_periphclk, - &exynos4_clk_mout_corebus, - &exynos4_clk_sclk_dmc, - &exynos4_clk_aclk_cored, - &exynos4_clk_aclk_corep, - &exynos4_clk_aclk_acp, - &exynos4_clk_pclk_acp, - &exynos4_clk_vpllsrc, - &exynos4_clk_sclk_vpll, - &exynos4_clk_aclk_200, - &exynos4_clk_aclk_100, - &exynos4_clk_aclk_160, - &exynos4_clk_aclk_133, - &exynos4_clk_dout_mmc0, - &exynos4_clk_dout_mmc1, - &exynos4_clk_dout_mmc2, - &exynos4_clk_dout_mmc3, - &exynos4_clk_dout_mmc4, - &exynos4_clk_mout_mfc0, - &exynos4_clk_mout_mfc1, -}; - -static struct clk *exynos4_clk_cdev[] = { - &exynos4_clk_pdma0, - &exynos4_clk_pdma1, - &exynos4_clk_mdma1, - &exynos4_clk_fimd0, -}; - -static struct clksrc_clk *exynos4_clksrc_cdev[] = { - &exynos4_clk_sclk_uart0, - &exynos4_clk_sclk_uart1, - &exynos4_clk_sclk_uart2, - &exynos4_clk_sclk_uart3, - &exynos4_clk_sclk_mmc0, - &exynos4_clk_sclk_mmc1, - &exynos4_clk_sclk_mmc2, - &exynos4_clk_sclk_mmc3, - &exynos4_clk_sclk_spi0, - &exynos4_clk_sclk_spi1, - &exynos4_clk_sclk_spi2, - &exynos4_clk_mdout_spi0, - &exynos4_clk_mdout_spi1, - &exynos4_clk_mdout_spi2, -}; - -static struct clk_lookup exynos4_clk_lookup[] = { - CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos4_clk_sclk_uart0.clk), - CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk), - CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk), - CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk), - CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), - CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), - CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), - CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), - CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0), - CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0), - CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1), - CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1), - CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk), - CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk), - CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk), -}; - -static int xtal_rate; - -static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) -{ - if (soc_is_exynos4210()) - return s5p_get_pll45xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0), - pll_4508); - else if (soc_is_exynos4212() || soc_is_exynos4412()) - return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0)); - else - return 0; -} - -static struct clk_ops exynos4_fout_apll_ops = { - .get_rate = exynos4_fout_apll_get_rate, -}; - -static u32 exynos4_vpll_div[][8] = { - { 54000000, 3, 53, 3, 1024, 0, 17, 0 }, - { 108000000, 3, 53, 2, 1024, 0, 17, 0 }, -}; - -static unsigned long exynos4_vpll_get_rate(struct clk *clk) -{ - return clk->rate; -} - -static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int vpll_con0, vpll_con1 = 0; - unsigned int i; - - /* Return if nothing changed */ - if (clk->rate == rate) - return 0; - - vpll_con0 = __raw_readl(EXYNOS4_VPLL_CON0); - vpll_con0 &= ~(0x1 << 27 | \ - PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \ - PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \ - PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); - - vpll_con1 = __raw_readl(EXYNOS4_VPLL_CON1); - vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \ - PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \ - PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT); - - for (i = 0; i < ARRAY_SIZE(exynos4_vpll_div); i++) { - if (exynos4_vpll_div[i][0] == rate) { - vpll_con0 |= exynos4_vpll_div[i][1] << PLL46XX_PDIV_SHIFT; - vpll_con0 |= exynos4_vpll_div[i][2] << PLL46XX_MDIV_SHIFT; - vpll_con0 |= exynos4_vpll_div[i][3] << PLL46XX_SDIV_SHIFT; - vpll_con1 |= exynos4_vpll_div[i][4] << PLL46XX_KDIV_SHIFT; - vpll_con1 |= exynos4_vpll_div[i][5] << PLL46XX_MFR_SHIFT; - vpll_con1 |= exynos4_vpll_div[i][6] << PLL46XX_MRR_SHIFT; - vpll_con0 |= exynos4_vpll_div[i][7] << 27; - break; - } - } - - if (i == ARRAY_SIZE(exynos4_vpll_div)) { - printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n", - __func__); - return -EINVAL; - } - - __raw_writel(vpll_con0, EXYNOS4_VPLL_CON0); - __raw_writel(vpll_con1, EXYNOS4_VPLL_CON1); - - /* Wait for VPLL lock */ - while (!(__raw_readl(EXYNOS4_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT))) - continue; - - clk->rate = rate; - return 0; -} - -static struct clk_ops exynos4_vpll_ops = { - .get_rate = exynos4_vpll_get_rate, - .set_rate = exynos4_vpll_set_rate, -}; - -void __init_or_cpufreq exynos4_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long apll = 0; - unsigned long mpll = 0; - unsigned long epll = 0; - unsigned long vpll = 0; - unsigned long vpllsrc; - unsigned long xtal; - unsigned long armclk; - unsigned long sclk_dmc; - unsigned long aclk_200; - unsigned long aclk_100; - unsigned long aclk_160; - unsigned long aclk_133; - unsigned int ptr; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - - xtal_rate = xtal; - - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - if (soc_is_exynos4210()) { - apll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_APLL_CON0), - pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0), - pll_4508); - epll = s5p_get_pll46xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0), - __raw_readl(EXYNOS4_EPLL_CON1), pll_4600); - - vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk); - vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0), - __raw_readl(EXYNOS4_VPLL_CON1), pll_4650c); - } else if (soc_is_exynos4212() || soc_is_exynos4412()) { - apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_APLL_CON0)); - mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0)); - epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0), - __raw_readl(EXYNOS4_EPLL_CON1)); - - vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk); - vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0), - __raw_readl(EXYNOS4_VPLL_CON1)); - } else { - /* nothing */ - } - - clk_fout_apll.ops = &exynos4_fout_apll_ops; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - clk_fout_vpll.ops = &exynos4_vpll_ops; - clk_fout_vpll.rate = vpll; - - printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", - apll, mpll, epll, vpll); - - armclk = clk_get_rate(&exynos4_clk_armclk.clk); - sclk_dmc = clk_get_rate(&exynos4_clk_sclk_dmc.clk); - - aclk_200 = clk_get_rate(&exynos4_clk_aclk_200.clk); - aclk_100 = clk_get_rate(&exynos4_clk_aclk_100.clk); - aclk_160 = clk_get_rate(&exynos4_clk_aclk_160.clk); - aclk_133 = clk_get_rate(&exynos4_clk_aclk_133.clk); - - printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" - "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n", - armclk, sclk_dmc, aclk_200, - aclk_100, aclk_160, aclk_133); - - clk_f.rate = armclk; - clk_h.rate = sclk_dmc; - clk_p.rate = aclk_100; - - for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrcs); ptr++) - s3c_set_clksrc(&exynos4_clksrcs[ptr], true); -} - -static struct clk *exynos4_clks[] __initdata = { - &exynos4_clk_sclk_hdmi27m, - &exynos4_clk_sclk_hdmiphy, - &exynos4_clk_sclk_usbphy0, - &exynos4_clk_sclk_usbphy1, -}; - -#ifdef CONFIG_PM_SLEEP -static int exynos4_clock_suspend(void) -{ - s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); - return 0; -} - -static void exynos4_clock_resume(void) -{ - s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save)); -} - -#else -#define exynos4_clock_suspend NULL -#define exynos4_clock_resume NULL -#endif - -static struct syscore_ops exynos4_clock_syscore_ops = { - .suspend = exynos4_clock_suspend, - .resume = exynos4_clock_resume, -}; - -void __init exynos4_register_clocks(void) -{ - int ptr; - - s3c24xx_register_clocks(exynos4_clks, ARRAY_SIZE(exynos4_clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sysclks); ptr++) - s3c_register_clksrc(exynos4_sysclks[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sclk_tv); ptr++) - s3c_register_clksrc(exynos4_sclk_tv[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrc_cdev); ptr++) - s3c_register_clksrc(exynos4_clksrc_cdev[ptr], 1); - - s3c_register_clksrc(exynos4_clksrcs, ARRAY_SIZE(exynos4_clksrcs)); - s3c_register_clocks(exynos4_init_clocks_on, ARRAY_SIZE(exynos4_init_clocks_on)); - - s3c24xx_register_clocks(exynos4_clk_cdev, ARRAY_SIZE(exynos4_clk_cdev)); - for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clk_cdev); ptr++) - s3c_disable_clocks(exynos4_clk_cdev[ptr], 1); - - s3c_register_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off)); - s3c_disable_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off)); - clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup)); - - register_syscore_ops(&exynos4_clock_syscore_ops); - s3c24xx_register_clock(&dummy_apb_pclk); - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-exynos/clock-exynos4.h b/arch/arm/mach-exynos/clock-exynos4.h deleted file mode 100644 index bd12d5f8b63d..000000000000 --- a/arch/arm/mach-exynos/clock-exynos4.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for exynos4 clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_CLOCK_H -#define __ASM_ARCH_CLOCK_H __FILE__ - -#include <linux/clk.h> - -extern struct clksrc_clk exynos4_clk_aclk_133; -extern struct clksrc_clk exynos4_clk_mout_mpll; - -extern struct clksrc_sources exynos4_clkset_mout_corebus; -extern struct clksrc_sources exynos4_clkset_group; - -extern struct clk *exynos4_clkset_aclk_top_list[]; -extern struct clk *exynos4_clkset_group_list[]; - -extern struct clksrc_sources exynos4_clkset_mout_g2d0; -extern struct clksrc_sources exynos4_clkset_mout_g2d1; - -extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable); -extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable); -extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable); -extern int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable); -extern int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable); - -#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c deleted file mode 100644 index 19af9f783c56..000000000000 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4210 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pm.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include "common.h" -#include "clock-exynos4.h" - -#ifdef CONFIG_PM_SLEEP -static struct sleep_save exynos4210_clock_save[] = { - SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE), - SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE), - SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1), - SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1), - SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1), - SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE), - SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1), - SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR), -}; -#endif - -static struct clksrc_clk *sysclks[] = { - /* nothing here yet */ -}; - -static struct clksrc_clk exynos4210_clk_mout_g2d0 = { - .clk = { - .name = "mout_g2d0", - }, - .sources = &exynos4_clkset_mout_g2d0, - .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk exynos4210_clk_mout_g2d1 = { - .clk = { - .name = "mout_g2d1", - }, - .sources = &exynos4_clkset_mout_g2d1, - .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 }, -}; - -static struct clk *exynos4210_clkset_mout_g2d_list[] = { - [0] = &exynos4210_clk_mout_g2d0.clk, - [1] = &exynos4210_clk_mout_g2d1.clk, -}; - -static struct clksrc_sources exynos4210_clkset_mout_g2d = { - .sources = exynos4210_clkset_mout_g2d_list, - .nr_sources = ARRAY_SIZE(exynos4210_clkset_mout_g2d_list), -}; - -static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable); -} - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "sclk_sata", - .id = -1, - .enable = exynos4_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &exynos4_clkset_mout_corebus, - .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimd", - .devname = "exynos4-fb.1", - .enable = exynos4_clksrc_mask_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 }, - }, { - .clk = { - .name = "sclk_fimg2d", - }, - .sources = &exynos4210_clkset_mout_g2d, - .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 }, - }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "sataphy", - .id = -1, - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "sata", - .id = -1, - .parent = &exynos4_clk_aclk_133.clk, - .enable = exynos4_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "fimd", - .devname = "exynos4-fb.1", - .enable = exynos4_clk_ip_lcd1_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.9", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.11", - .enable = exynos4_clk_ip_lcd1_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "fimg2d", - .enable = exynos4_clk_ip_image_ctrl, - .ctrlbit = (1 << 0), - }, -}; - -#ifdef CONFIG_PM_SLEEP -static int exynos4210_clock_suspend(void) -{ - s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save)); - - return 0; -} - -static void exynos4210_clock_resume(void) -{ - s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save)); -} - -#else -#define exynos4210_clock_suspend NULL -#define exynos4210_clock_resume NULL -#endif - -static struct syscore_ops exynos4210_clock_syscore_ops = { - .suspend = exynos4210_clock_suspend, - .resume = exynos4210_clock_resume, -}; - -void __init exynos4210_register_clocks(void) -{ - int ptr; - - exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU; - exynos4_clk_mout_mpll.reg_src.shift = 8; - exynos4_clk_mout_mpll.reg_src.size = 1; - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - register_syscore_ops(&exynos4210_clock_syscore_ops); -} diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c deleted file mode 100644 index 529476f8ec71..000000000000 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4212 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pm.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include "common.h" -#include "clock-exynos4.h" - -#ifdef CONFIG_PM_SLEEP -static struct sleep_save exynos4212_clock_save[] = { - SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE), - SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE), - SAVE_ITEM(EXYNOS4212_CLKGATE_IP_IMAGE), - SAVE_ITEM(EXYNOS4212_CLKGATE_IP_PERIR), -}; -#endif - -static int exynos4212_clk_ip_isp0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP0, clk, enable); -} - -static int exynos4212_clk_ip_isp1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP1, clk, enable); -} - -static struct clk *clk_src_mpll_user_list[] = { - [0] = &clk_fin_mpll, - [1] = &exynos4_clk_mout_mpll.clk, -}; - -static struct clksrc_sources clk_src_mpll_user = { - .sources = clk_src_mpll_user_list, - .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list), -}; - -static struct clksrc_clk clk_mout_mpll_user = { - .clk = { - .name = "mout_mpll_user", - }, - .sources = &clk_src_mpll_user, - .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 }, -}; - -static struct clksrc_clk exynos4x12_clk_mout_g2d0 = { - .clk = { - .name = "mout_g2d0", - }, - .sources = &exynos4_clkset_mout_g2d0, - .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 20, .size = 1 }, -}; - -static struct clksrc_clk exynos4x12_clk_mout_g2d1 = { - .clk = { - .name = "mout_g2d1", - }, - .sources = &exynos4_clkset_mout_g2d1, - .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 24, .size = 1 }, -}; - -static struct clk *exynos4x12_clkset_mout_g2d_list[] = { - [0] = &exynos4x12_clk_mout_g2d0.clk, - [1] = &exynos4x12_clk_mout_g2d1.clk, -}; - -static struct clksrc_sources exynos4x12_clkset_mout_g2d = { - .sources = exynos4x12_clkset_mout_g2d_list, - .nr_sources = ARRAY_SIZE(exynos4x12_clkset_mout_g2d_list), -}; - -static struct clksrc_clk *sysclks[] = { - &clk_mout_mpll_user, -}; - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "sclk_fimg2d", - }, - .sources = &exynos4x12_clkset_mout_g2d, - .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 28, .size = 1 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_DMC1, .shift = 0, .size = 4 }, - }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "sysmmu", - .devname = "exynos-sysmmu.9", - .enable = exynos4_clk_ip_dmc_ctrl, - .ctrlbit = (1 << 24), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.12", - .enable = exynos4212_clk_ip_isp0_ctrl, - .ctrlbit = (7 << 8), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.13", - .enable = exynos4212_clk_ip_isp1_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.14", - .enable = exynos4212_clk_ip_isp0_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.15", - .enable = exynos4212_clk_ip_isp0_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "flite", - .devname = "exynos-fimc-lite.0", - .enable = exynos4212_clk_ip_isp0_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "flite", - .devname = "exynos-fimc-lite.1", - .enable = exynos4212_clk_ip_isp0_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "fimg2d", - .enable = exynos4_clk_ip_dmc_ctrl, - .ctrlbit = (1 << 23), - }, -}; - -#ifdef CONFIG_PM_SLEEP -static int exynos4212_clock_suspend(void) -{ - s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save)); - - return 0; -} - -static void exynos4212_clock_resume(void) -{ - s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save)); -} - -#else -#define exynos4212_clock_suspend NULL -#define exynos4212_clock_resume NULL -#endif - -static struct syscore_ops exynos4212_clock_syscore_ops = { - .suspend = exynos4212_clock_suspend, - .resume = exynos4212_clock_resume, -}; - -void __init exynos4212_register_clocks(void) -{ - int ptr; - - /* usbphy1 is removed */ - exynos4_clkset_group_list[4] = NULL; - - /* mout_mpll_user is used */ - exynos4_clkset_group_list[6] = &clk_mout_mpll_user.clk; - exynos4_clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk; - - exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_DMC; - exynos4_clk_mout_mpll.reg_src.shift = 12; - exynos4_clk_mout_mpll.reg_src.size = 1; - - for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) - s3c_register_clksrc(sysclks[ptr], 1); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - register_syscore_ops(&exynos4212_clock_syscore_ops); -} diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c deleted file mode 100644 index b0ea31fc9fb8..000000000000 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ /dev/null @@ -1,1645 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Clock support for EXYNOS5 SoCs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <plat/cpu-freq.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> -#include <plat/pm.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include "common.h" - -#ifdef CONFIG_PM_SLEEP -static struct sleep_save exynos5_clock_save[] = { - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_TOP), - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_GSCL), - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_DISP1_0), - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_FSYS), - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_MAUDIO), - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC0), - SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC1), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_GSCL), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_DISP1), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_MFC), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_G3D), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_GEN), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_FSYS), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIC), - SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIS), - SAVE_ITEM(EXYNOS5_CLKGATE_BLOCK), - SAVE_ITEM(EXYNOS5_CLKDIV_TOP0), - SAVE_ITEM(EXYNOS5_CLKDIV_TOP1), - SAVE_ITEM(EXYNOS5_CLKDIV_GSCL), - SAVE_ITEM(EXYNOS5_CLKDIV_DISP1_0), - SAVE_ITEM(EXYNOS5_CLKDIV_GEN), - SAVE_ITEM(EXYNOS5_CLKDIV_MAUDIO), - SAVE_ITEM(EXYNOS5_CLKDIV_FSYS0), - SAVE_ITEM(EXYNOS5_CLKDIV_FSYS1), - SAVE_ITEM(EXYNOS5_CLKDIV_FSYS2), - SAVE_ITEM(EXYNOS5_CLKDIV_FSYS3), - SAVE_ITEM(EXYNOS5_CLKDIV_PERIC0), - SAVE_ITEM(EXYNOS5_CLKDIV_PERIC1), - SAVE_ITEM(EXYNOS5_CLKDIV_PERIC2), - SAVE_ITEM(EXYNOS5_CLKDIV_PERIC3), - SAVE_ITEM(EXYNOS5_CLKDIV_PERIC4), - SAVE_ITEM(EXYNOS5_CLKDIV_PERIC5), - SAVE_ITEM(EXYNOS5_SCLK_DIV_ISP), - SAVE_ITEM(EXYNOS5_CLKSRC_TOP0), - SAVE_ITEM(EXYNOS5_CLKSRC_TOP1), - SAVE_ITEM(EXYNOS5_CLKSRC_TOP2), - SAVE_ITEM(EXYNOS5_CLKSRC_TOP3), - SAVE_ITEM(EXYNOS5_CLKSRC_GSCL), - SAVE_ITEM(EXYNOS5_CLKSRC_DISP1_0), - SAVE_ITEM(EXYNOS5_CLKSRC_MAUDIO), - SAVE_ITEM(EXYNOS5_CLKSRC_FSYS), - SAVE_ITEM(EXYNOS5_CLKSRC_PERIC0), - SAVE_ITEM(EXYNOS5_CLKSRC_PERIC1), - SAVE_ITEM(EXYNOS5_SCLK_SRC_ISP), - SAVE_ITEM(EXYNOS5_EPLL_CON0), - SAVE_ITEM(EXYNOS5_EPLL_CON1), - SAVE_ITEM(EXYNOS5_EPLL_CON2), - SAVE_ITEM(EXYNOS5_VPLL_CON0), - SAVE_ITEM(EXYNOS5_VPLL_CON1), - SAVE_ITEM(EXYNOS5_VPLL_CON2), - SAVE_ITEM(EXYNOS5_PWR_CTRL1), - SAVE_ITEM(EXYNOS5_PWR_CTRL2), -}; -#endif - -static struct clk exynos5_clk_sclk_dptxphy = { - .name = "sclk_dptx", -}; - -static struct clk exynos5_clk_sclk_hdmi24m = { - .name = "sclk_hdmi24m", - .rate = 24000000, -}; - -static struct clk exynos5_clk_sclk_hdmi27m = { - .name = "sclk_hdmi27m", - .rate = 27000000, -}; - -static struct clk exynos5_clk_sclk_hdmiphy = { - .name = "sclk_hdmiphy", -}; - -static struct clk exynos5_clk_sclk_usbphy = { - .name = "sclk_usbphy", - .rate = 48000000, -}; - -static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable); -} - -static int exynos5_clksrc_mask_disp1_0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_DISP1_0, clk, enable); -} - -static int exynos5_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_FSYS, clk, enable); -} - -static int exynos5_clksrc_mask_gscl_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_GSCL, clk, enable); -} - -static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable); -} - -static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable); -} - -static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable); -} - -static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable); -} - -static int exynos5_clk_ip_disp1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_DISP1, clk, enable); -} - -static int exynos5_clk_ip_fsys_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_FSYS, clk, enable); -} - -static int exynos5_clk_block_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_BLOCK, clk, enable); -} - -static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable); -} - -static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable); -} - -static int exynos5_clk_ip_peric_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIC, clk, enable); -} - -static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable); -} - -static int exynos5_clk_ip_gscl_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GSCL, clk, enable); -} - -static int exynos5_clk_ip_isp0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP0, clk, enable); -} - -static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable); -} - -static int exynos5_clk_hdmiphy_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); -} - -/* Core list of CMU_CPU side */ - -static struct clksrc_clk exynos5_clk_mout_apll = { - .clk = { - .name = "mout_apll", - }, - .sources = &clk_src_apll, - .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_apll = { - .clk = { - .name = "sclk_apll", - .parent = &exynos5_clk_mout_apll.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_mout_bpll_fout = { - .clk = { - .name = "mout_bpll_fout", - }, - .sources = &clk_src_bpll_fout, - .reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 0, .size = 1 }, -}; - -static struct clk *exynos5_clk_src_bpll_list[] = { - [0] = &clk_fin_bpll, - [1] = &exynos5_clk_mout_bpll_fout.clk, -}; - -static struct clksrc_sources exynos5_clk_src_bpll = { - .sources = exynos5_clk_src_bpll_list, - .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_list), -}; - -static struct clksrc_clk exynos5_clk_mout_bpll = { - .clk = { - .name = "mout_bpll", - }, - .sources = &exynos5_clk_src_bpll, - .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 }, -}; - -static struct clk *exynos5_clk_src_bpll_user_list[] = { - [0] = &clk_fin_mpll, - [1] = &exynos5_clk_mout_bpll.clk, -}; - -static struct clksrc_sources exynos5_clk_src_bpll_user = { - .sources = exynos5_clk_src_bpll_user_list, - .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_user_list), -}; - -static struct clksrc_clk exynos5_clk_mout_bpll_user = { - .clk = { - .name = "mout_bpll_user", - }, - .sources = &exynos5_clk_src_bpll_user, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 24, .size = 1 }, -}; - -static struct clksrc_clk exynos5_clk_mout_cpll = { - .clk = { - .name = "mout_cpll", - }, - .sources = &clk_src_cpll, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 8, .size = 1 }, -}; - -static struct clksrc_clk exynos5_clk_mout_epll = { - .clk = { - .name = "mout_epll", - }, - .sources = &clk_src_epll, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 }, -}; - -static struct clksrc_clk exynos5_clk_mout_mpll_fout = { - .clk = { - .name = "mout_mpll_fout", - }, - .sources = &clk_src_mpll_fout, - .reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 4, .size = 1 }, -}; - -static struct clk *exynos5_clk_src_mpll_list[] = { - [0] = &clk_fin_mpll, - [1] = &exynos5_clk_mout_mpll_fout.clk, -}; - -static struct clksrc_sources exynos5_clk_src_mpll = { - .sources = exynos5_clk_src_mpll_list, - .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_list), -}; - -static struct clksrc_clk exynos5_clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - }, - .sources = &exynos5_clk_src_mpll, - .reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 }, -}; - -static struct clk *exynos_clkset_vpllsrc_list[] = { - [0] = &clk_fin_vpll, - [1] = &exynos5_clk_sclk_hdmi27m, -}; - -static struct clksrc_sources exynos5_clkset_vpllsrc = { - .sources = exynos_clkset_vpllsrc_list, - .nr_sources = ARRAY_SIZE(exynos_clkset_vpllsrc_list), -}; - -static struct clksrc_clk exynos5_clk_vpllsrc = { - .clk = { - .name = "vpll_src", - .enable = exynos5_clksrc_mask_top_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos5_clkset_vpllsrc, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 0, .size = 1 }, -}; - -static struct clk *exynos5_clkset_sclk_vpll_list[] = { - [0] = &exynos5_clk_vpllsrc.clk, - [1] = &clk_fout_vpll, -}; - -static struct clksrc_sources exynos5_clkset_sclk_vpll = { - .sources = exynos5_clkset_sclk_vpll_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_vpll_list), -}; - -static struct clksrc_clk exynos5_clk_sclk_vpll = { - .clk = { - .name = "sclk_vpll", - }, - .sources = &exynos5_clkset_sclk_vpll, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 16, .size = 1 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_pixel = { - .clk = { - .name = "sclk_pixel", - .parent = &exynos5_clk_sclk_vpll.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 28, .size = 4 }, -}; - -static struct clk *exynos5_clkset_sclk_hdmi_list[] = { - [0] = &exynos5_clk_sclk_pixel.clk, - [1] = &exynos5_clk_sclk_hdmiphy, -}; - -static struct clksrc_sources exynos5_clkset_sclk_hdmi = { - .sources = exynos5_clkset_sclk_hdmi_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_hdmi_list), -}; - -static struct clksrc_clk exynos5_clk_sclk_hdmi = { - .clk = { - .name = "sclk_hdmi", - .enable = exynos5_clksrc_mask_disp1_0_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &exynos5_clkset_sclk_hdmi, - .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 20, .size = 1 }, -}; - -static struct clksrc_clk *exynos5_sclk_tv[] = { - &exynos5_clk_sclk_pixel, - &exynos5_clk_sclk_hdmi, -}; - -static struct clk *exynos5_clk_src_mpll_user_list[] = { - [0] = &clk_fin_mpll, - [1] = &exynos5_clk_mout_mpll.clk, -}; - -static struct clksrc_sources exynos5_clk_src_mpll_user = { - .sources = exynos5_clk_src_mpll_user_list, - .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_user_list), -}; - -static struct clksrc_clk exynos5_clk_mout_mpll_user = { - .clk = { - .name = "mout_mpll_user", - }, - .sources = &exynos5_clk_src_mpll_user, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 20, .size = 1 }, -}; - -static struct clk *exynos5_clkset_mout_cpu_list[] = { - [0] = &exynos5_clk_mout_apll.clk, - [1] = &exynos5_clk_mout_mpll.clk, -}; - -static struct clksrc_sources exynos5_clkset_mout_cpu = { - .sources = exynos5_clkset_mout_cpu_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_mout_cpu_list), -}; - -static struct clksrc_clk exynos5_clk_mout_cpu = { - .clk = { - .name = "mout_cpu", - }, - .sources = &exynos5_clkset_mout_cpu, - .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 16, .size = 1 }, -}; - -static struct clksrc_clk exynos5_clk_dout_armclk = { - .clk = { - .name = "dout_armclk", - .parent = &exynos5_clk_mout_cpu.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_dout_arm2clk = { - .clk = { - .name = "dout_arm2clk", - .parent = &exynos5_clk_dout_armclk.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 28, .size = 3 }, -}; - -static struct clk exynos5_clk_armclk = { - .name = "armclk", - .parent = &exynos5_clk_dout_arm2clk.clk, -}; - -/* Core list of CMU_CDREX side */ - -static struct clk *exynos5_clkset_cdrex_list[] = { - [0] = &exynos5_clk_mout_mpll.clk, - [1] = &exynos5_clk_mout_bpll.clk, -}; - -static struct clksrc_sources exynos5_clkset_cdrex = { - .sources = exynos5_clkset_cdrex_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_cdrex_list), -}; - -static struct clksrc_clk exynos5_clk_cdrex = { - .clk = { - .name = "clk_cdrex", - }, - .sources = &exynos5_clkset_cdrex, - .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 4, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_CDREX, .shift = 16, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_aclk_acp = { - .clk = { - .name = "aclk_acp", - .parent = &exynos5_clk_mout_mpll.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_pclk_acp = { - .clk = { - .name = "pclk_acp", - .parent = &exynos5_clk_aclk_acp.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 4, .size = 3 }, -}; - -/* Core list of CMU_TOP side */ - -static struct clk *exynos5_clkset_aclk_top_list[] = { - [0] = &exynos5_clk_mout_mpll_user.clk, - [1] = &exynos5_clk_mout_bpll_user.clk, -}; - -static struct clksrc_sources exynos5_clkset_aclk = { - .sources = exynos5_clkset_aclk_top_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list), -}; - -static struct clksrc_clk exynos5_clk_aclk_400 = { - .clk = { - .name = "aclk_400", - }, - .sources = &exynos5_clkset_aclk, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 }, -}; - -static struct clk *exynos5_clkset_aclk_333_166_list[] = { - [0] = &exynos5_clk_mout_cpll.clk, - [1] = &exynos5_clk_mout_mpll_user.clk, -}; - -static struct clksrc_sources exynos5_clkset_aclk_333_166 = { - .sources = exynos5_clkset_aclk_333_166_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list), -}; - -static struct clksrc_clk exynos5_clk_aclk_333 = { - .clk = { - .name = "aclk_333", - }, - .sources = &exynos5_clkset_aclk_333_166, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 16, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 20, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_aclk_166 = { - .clk = { - .name = "aclk_166", - }, - .sources = &exynos5_clkset_aclk_333_166, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 8, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 8, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_aclk_266 = { - .clk = { - .name = "aclk_266", - .parent = &exynos5_clk_mout_mpll_user.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 16, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_aclk_200 = { - .clk = { - .name = "aclk_200", - }, - .sources = &exynos5_clkset_aclk, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 12, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 12, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_aclk_66_pre = { - .clk = { - .name = "aclk_66_pre", - .parent = &exynos5_clk_mout_mpll_user.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP1, .shift = 24, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_aclk_66 = { - .clk = { - .name = "aclk_66", - .parent = &exynos5_clk_aclk_66_pre.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 }, -}; - -static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid = { - .clk = { - .name = "mout_aclk_300_gscl_mid", - }, - .sources = &exynos5_clkset_aclk, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 24, .size = 1 }, -}; - -static struct clk *exynos5_clkset_aclk_300_mid1_list[] = { - [0] = &exynos5_clk_sclk_vpll.clk, - [1] = &exynos5_clk_mout_cpll.clk, -}; - -static struct clksrc_sources exynos5_clkset_aclk_300_gscl_mid1 = { - .sources = exynos5_clkset_aclk_300_mid1_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_mid1_list), -}; - -static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid1 = { - .clk = { - .name = "mout_aclk_300_gscl_mid1", - }, - .sources = &exynos5_clkset_aclk_300_gscl_mid1, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP1, .shift = 12, .size = 1 }, -}; - -static struct clk *exynos5_clkset_aclk_300_gscl_list[] = { - [0] = &exynos5_clk_mout_aclk_300_gscl_mid.clk, - [1] = &exynos5_clk_mout_aclk_300_gscl_mid1.clk, -}; - -static struct clksrc_sources exynos5_clkset_aclk_300_gscl = { - .sources = exynos5_clkset_aclk_300_gscl_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_gscl_list), -}; - -static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl = { - .clk = { - .name = "mout_aclk_300_gscl", - }, - .sources = &exynos5_clkset_aclk_300_gscl, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 25, .size = 1 }, -}; - -static struct clk *exynos5_clk_src_gscl_300_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = &exynos5_clk_mout_aclk_300_gscl.clk, -}; - -static struct clksrc_sources exynos5_clk_src_gscl_300 = { - .sources = exynos5_clk_src_gscl_300_list, - .nr_sources = ARRAY_SIZE(exynos5_clk_src_gscl_300_list), -}; - -static struct clksrc_clk exynos5_clk_aclk_300_gscl = { - .clk = { - .name = "aclk_300_gscl", - }, - .sources = &exynos5_clk_src_gscl_300, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 10, .size = 1 }, -}; - -static struct clk exynos5_init_clocks_off[] = { - { - .name = "timers", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 24), - }, { - .name = "tmu_apbif", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peris_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "rtc", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peris_ctrl, - .ctrlbit = (1 << 20), - }, { - .name = "watchdog", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peris_ctrl, - .ctrlbit = (1 << 19), - }, { - .name = "biu", /* bus interface unit clock */ - .devname = "dw_mmc.0", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "biu", - .devname = "dw_mmc.1", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "biu", - .devname = "dw_mmc.2", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 14), - }, { - .name = "biu", - .devname = "dw_mmc.3", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 15), - }, { - .name = "sata", - .devname = "exynos5-sata", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "sata-phy", - .devname = "exynos5-sata-phy", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 24), - }, { - .name = "i2c", - .devname = "exynos5-sata-phy-i2c", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 25), - }, { - .name = "mfc", - .devname = "s5p-mfc-v6", - .enable = exynos5_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "hdmi", - .devname = "exynos5-hdmi", - .enable = exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "hdmiphy", - .devname = "exynos5-hdmi", - .enable = exynos5_clk_hdmiphy_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "mixer", - .devname = "exynos5-mixer", - .enable = exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 5), - }, { - .name = "dp", - .devname = "exynos-dp", - .enable = exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "jpeg", - .enable = exynos5_clk_ip_gen_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "dsim0", - .enable = exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "iis", - .devname = "samsung-i2s.1", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 20), - }, { - .name = "iis", - .devname = "samsung-i2s.2", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 21), - }, { - .name = "pcm", - .devname = "samsung-pcm.1", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "pcm", - .devname = "samsung-pcm.2", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 23), - }, { - .name = "spdif", - .devname = "samsung-spdif", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 26), - }, { - .name = "ac97", - .devname = "samsung-ac97", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 27), - }, { - .name = "usbhost", - .enable = exynos5_clk_ip_fsys_ctrl , - .ctrlbit = (1 << 18), - }, { - .name = "usbotg", - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "nfcon", - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "iop", - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = ((1 << 30) | (1 << 26) | (1 << 23)), - }, { - .name = "core_iop", - .enable = exynos5_clk_ip_core_ctrl, - .ctrlbit = ((1 << 21) | (1 << 3)), - }, { - .name = "mcu_iop", - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.0", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 6), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.1", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.2", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.3", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.4", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.5", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.6", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "i2c", - .devname = "s3c2440-i2c.7", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 13), - }, { - .name = "i2c", - .devname = "s3c2440-hdmiphy-i2c", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 14), - }, { - .name = "spi", - .devname = "exynos4210-spi.0", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 16), - }, { - .name = "spi", - .devname = "exynos4210-spi.1", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 17), - }, { - .name = "spi", - .devname = "exynos4210-spi.2", - .parent = &exynos5_clk_aclk_66.clk, - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 18), - }, { - .name = "gscl", - .devname = "exynos-gsc.0", - .enable = exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "gscl", - .devname = "exynos-gsc.1", - .enable = exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "gscl", - .devname = "exynos-gsc.2", - .enable = exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "gscl", - .devname = "exynos-gsc.3", - .enable = exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.1", - .enable = &exynos5_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.0", - .enable = &exynos5_clk_ip_mfc_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.2", - .enable = &exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 9) - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.3", - .enable = &exynos5_clk_ip_gen_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.4", - .enable = &exynos5_clk_ip_gen_ctrl, - .ctrlbit = (1 << 6) - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.5", - .enable = &exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 7), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.6", - .enable = &exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 8), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.7", - .enable = &exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 9), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.8", - .enable = &exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 10), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.9", - .enable = &exynos5_clk_ip_isp0_ctrl, - .ctrlbit = (0x3F << 8), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.10", - .enable = &exynos5_clk_ip_isp1_ctrl, - .ctrlbit = (0xF << 4), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.11", - .enable = &exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 8) - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.12", - .enable = &exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 11), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.13", - .enable = &exynos5_clk_ip_gscl_ctrl, - .ctrlbit = (1 << 12), - }, { - .name = "sysmmu", - .devname = "exynos-sysmmu.14", - .enable = &exynos5_clk_ip_acp_ctrl, - .ctrlbit = (1 << 7) - } -}; - -static struct clk exynos5_init_clocks_on[] = { - { - .name = "uart", - .devname = "s5pv210-uart.0", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 0), - }, { - .name = "uart", - .devname = "s5pv210-uart.1", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 1), - }, { - .name = "uart", - .devname = "s5pv210-uart.2", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 2), - }, { - .name = "uart", - .devname = "s5pv210-uart.3", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 3), - }, { - .name = "uart", - .devname = "s5pv210-uart.4", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 4), - }, { - .name = "uart", - .devname = "s5pv210-uart.5", - .enable = exynos5_clk_ip_peric_ctrl, - .ctrlbit = (1 << 5), - } -}; - -static struct clk exynos5_clk_pdma0 = { - .name = "dma", - .devname = "dma-pl330.0", - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 1), -}; - -static struct clk exynos5_clk_pdma1 = { - .name = "dma", - .devname = "dma-pl330.1", - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 2), -}; - -static struct clk exynos5_clk_mdma1 = { - .name = "dma", - .devname = "dma-pl330.2", - .enable = exynos5_clk_ip_gen_ctrl, - .ctrlbit = (1 << 4), -}; - -static struct clk exynos5_clk_fimd1 = { - .name = "fimd", - .devname = "exynos5-fb.1", - .enable = exynos5_clk_ip_disp1_ctrl, - .ctrlbit = (1 << 0), -}; - -static struct clk *exynos5_clkset_group_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = NULL, - [2] = &exynos5_clk_sclk_hdmi24m, - [3] = &exynos5_clk_sclk_dptxphy, - [4] = &exynos5_clk_sclk_usbphy, - [5] = &exynos5_clk_sclk_hdmiphy, - [6] = &exynos5_clk_mout_mpll_user.clk, - [7] = &exynos5_clk_mout_epll.clk, - [8] = &exynos5_clk_sclk_vpll.clk, - [9] = &exynos5_clk_mout_cpll.clk, -}; - -static struct clksrc_sources exynos5_clkset_group = { - .sources = exynos5_clkset_group_list, - .nr_sources = ARRAY_SIZE(exynos5_clkset_group_list), -}; - -/* Possible clock sources for aclk_266_gscl_sub Mux */ -static struct clk *clk_src_gscl_266_list[] = { - [0] = &clk_ext_xtal_mux, - [1] = &exynos5_clk_aclk_266.clk, -}; - -static struct clksrc_sources clk_src_gscl_266 = { - .sources = clk_src_gscl_266_list, - .nr_sources = ARRAY_SIZE(clk_src_gscl_266_list), -}; - -static struct clksrc_clk exynos5_clk_dout_mmc0 = { - .clk = { - .name = "dout_mmc0", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_dout_mmc1 = { - .clk = { - .name = "dout_mmc1", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 4, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_dout_mmc2 = { - .clk = { - .name = "dout_mmc2", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 8, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_dout_mmc3 = { - .clk = { - .name = "dout_mmc3", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 12, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_dout_mmc4 = { - .clk = { - .name = "dout_mmc4", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_uart0 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.0", - .enable = exynos5_clksrc_mask_peric0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_uart1 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.1", - .enable = exynos5_clksrc_mask_peric0_ctrl, - .ctrlbit = (1 << 4), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 4, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 4, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_uart2 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.2", - .enable = exynos5_clksrc_mask_peric0_ctrl, - .ctrlbit = (1 << 8), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 8, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 8, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_uart3 = { - .clk = { - .name = "uclk1", - .devname = "exynos4210-uart.3", - .enable = exynos5_clksrc_mask_peric0_ctrl, - .ctrlbit = (1 << 12), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 12, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 12, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_mmc0 = { - .clk = { - .name = "ciu", /* card interface unit clock */ - .devname = "dw_mmc.0", - .parent = &exynos5_clk_dout_mmc0.clk, - .enable = exynos5_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 0), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_mmc1 = { - .clk = { - .name = "ciu", - .devname = "dw_mmc.1", - .parent = &exynos5_clk_dout_mmc1.clk, - .enable = exynos5_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 4), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_mmc2 = { - .clk = { - .name = "ciu", - .devname = "dw_mmc.2", - .parent = &exynos5_clk_dout_mmc2.clk, - .enable = exynos5_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 8), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_mmc3 = { - .clk = { - .name = "ciu", - .devname = "dw_mmc.3", - .parent = &exynos5_clk_dout_mmc3.clk, - .enable = exynos5_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 12), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_mdout_spi0 = { - .clk = { - .name = "mdout_spi", - .devname = "exynos4210-spi.0", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_mdout_spi1 = { - .clk = { - .name = "mdout_spi", - .devname = "exynos4210-spi.1", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_mdout_spi2 = { - .clk = { - .name = "mdout_spi", - .devname = "exynos4210-spi.2", - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_spi0 = { - .clk = { - .name = "sclk_spi", - .devname = "exynos4210-spi.0", - .parent = &exynos5_clk_mdout_spi0.clk, - .enable = exynos5_clksrc_mask_peric1_ctrl, - .ctrlbit = (1 << 16), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_spi1 = { - .clk = { - .name = "sclk_spi", - .devname = "exynos4210-spi.1", - .parent = &exynos5_clk_mdout_spi1.clk, - .enable = exynos5_clksrc_mask_peric1_ctrl, - .ctrlbit = (1 << 20), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_spi2 = { - .clk = { - .name = "sclk_spi", - .devname = "exynos4210-spi.2", - .parent = &exynos5_clk_mdout_spi2.clk, - .enable = exynos5_clksrc_mask_peric1_ctrl, - .ctrlbit = (1 << 24), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 }, -}; - -static struct clksrc_clk exynos5_clk_sclk_fimd1 = { - .clk = { - .name = "sclk_fimd", - .devname = "exynos5-fb.1", - .enable = exynos5_clksrc_mask_disp1_0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 }, -}; - -static struct clksrc_clk exynos5_clksrcs[] = { - { - .clk = { - .name = "aclk_266_gscl", - }, - .sources = &clk_src_gscl_266, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 8, .size = 1 }, - }, { - .clk = { - .name = "sclk_g3d", - .devname = "mali-t604.0", - .enable = exynos5_clk_block_ctrl, - .ctrlbit = (1 << 1), - }, - .sources = &exynos5_clkset_aclk, - .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 }, - }, { - .clk = { - .name = "sclk_sata", - .devname = "exynos5-sata", - .enable = exynos5_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &exynos5_clkset_aclk, - .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 24, .size = 1 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS0, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_gscl_wrap", - .devname = "s5p-mipi-csis.0", - .enable = exynos5_clksrc_mask_gscl_ctrl, - .ctrlbit = (1 << 24), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 24, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "sclk_gscl_wrap", - .devname = "s5p-mipi-csis.1", - .enable = exynos5_clksrc_mask_gscl_ctrl, - .ctrlbit = (1 << 28), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 28, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 28, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam0", - .enable = exynos5_clksrc_mask_gscl_ctrl, - .ctrlbit = (1 << 16), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "sclk_cam1", - .enable = exynos5_clksrc_mask_gscl_ctrl, - .ctrlbit = (1 << 20), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 20, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 20, .size = 4 }, - }, { - .clk = { - .name = "sclk_jpeg", - .parent = &exynos5_clk_mout_cpll.clk, - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_GEN, .shift = 4, .size = 3 }, - }, -}; - -/* Clock initialization code */ -static struct clksrc_clk *exynos5_sysclks[] = { - &exynos5_clk_mout_apll, - &exynos5_clk_sclk_apll, - &exynos5_clk_mout_bpll, - &exynos5_clk_mout_bpll_fout, - &exynos5_clk_mout_bpll_user, - &exynos5_clk_mout_cpll, - &exynos5_clk_mout_epll, - &exynos5_clk_mout_mpll, - &exynos5_clk_mout_mpll_fout, - &exynos5_clk_mout_mpll_user, - &exynos5_clk_vpllsrc, - &exynos5_clk_sclk_vpll, - &exynos5_clk_mout_cpu, - &exynos5_clk_dout_armclk, - &exynos5_clk_dout_arm2clk, - &exynos5_clk_cdrex, - &exynos5_clk_aclk_400, - &exynos5_clk_aclk_333, - &exynos5_clk_aclk_266, - &exynos5_clk_aclk_200, - &exynos5_clk_aclk_166, - &exynos5_clk_aclk_300_gscl, - &exynos5_clk_mout_aclk_300_gscl, - &exynos5_clk_mout_aclk_300_gscl_mid, - &exynos5_clk_mout_aclk_300_gscl_mid1, - &exynos5_clk_aclk_66_pre, - &exynos5_clk_aclk_66, - &exynos5_clk_dout_mmc0, - &exynos5_clk_dout_mmc1, - &exynos5_clk_dout_mmc2, - &exynos5_clk_dout_mmc3, - &exynos5_clk_dout_mmc4, - &exynos5_clk_aclk_acp, - &exynos5_clk_pclk_acp, - &exynos5_clk_sclk_spi0, - &exynos5_clk_sclk_spi1, - &exynos5_clk_sclk_spi2, - &exynos5_clk_mdout_spi0, - &exynos5_clk_mdout_spi1, - &exynos5_clk_mdout_spi2, - &exynos5_clk_sclk_fimd1, -}; - -static struct clk *exynos5_clk_cdev[] = { - &exynos5_clk_pdma0, - &exynos5_clk_pdma1, - &exynos5_clk_mdma1, - &exynos5_clk_fimd1, -}; - -static struct clksrc_clk *exynos5_clksrc_cdev[] = { - &exynos5_clk_sclk_uart0, - &exynos5_clk_sclk_uart1, - &exynos5_clk_sclk_uart2, - &exynos5_clk_sclk_uart3, - &exynos5_clk_sclk_mmc0, - &exynos5_clk_sclk_mmc1, - &exynos5_clk_sclk_mmc2, - &exynos5_clk_sclk_mmc3, -}; - -static struct clk_lookup exynos5_clk_lookup[] = { - CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos5_clk_sclk_uart0.clk), - CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk), - CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk), - CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk), - CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), - CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), - CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), - CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), - CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos5_clk_sclk_spi0.clk), - CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos5_clk_sclk_spi1.clk), - CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos5_clk_sclk_spi2.clk), - CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0), - CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1), - CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1), - CLKDEV_INIT("exynos5-fb.1", "lcd", &exynos5_clk_fimd1), -}; - -static unsigned long exynos5_epll_get_rate(struct clk *clk) -{ - return clk->rate; -} - -static struct clk *exynos5_clks[] __initdata = { - &exynos5_clk_sclk_hdmi27m, - &exynos5_clk_sclk_hdmiphy, - &clk_fout_bpll, - &clk_fout_bpll_div2, - &clk_fout_cpll, - &clk_fout_mpll_div2, - &exynos5_clk_armclk, -}; - -static u32 epll_div[][6] = { - { 192000000, 0, 48, 3, 1, 0 }, - { 180000000, 0, 45, 3, 1, 0 }, - { 73728000, 1, 73, 3, 3, 47710 }, - { 67737600, 1, 90, 4, 3, 20762 }, - { 49152000, 0, 49, 3, 3, 9961 }, - { 45158400, 0, 45, 3, 3, 10381 }, - { 180633600, 0, 45, 3, 1, 10381 }, -}; - -static int exynos5_epll_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int epll_con, epll_con_k; - unsigned int i; - unsigned int tmp; - unsigned int epll_rate; - unsigned int locktime; - unsigned int lockcnt; - - /* Return if nothing changed */ - if (clk->rate == rate) - return 0; - - if (clk->parent) - epll_rate = clk_get_rate(clk->parent); - else - epll_rate = clk_ext_xtal_mux.rate; - - if (epll_rate != 24000000) { - pr_err("Invalid Clock : recommended clock is 24MHz.\n"); - return -EINVAL; - } - - epll_con = __raw_readl(EXYNOS5_EPLL_CON0); - epll_con &= ~(0x1 << 27 | \ - PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \ - PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \ - PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); - - for (i = 0; i < ARRAY_SIZE(epll_div); i++) { - if (epll_div[i][0] == rate) { - epll_con_k = epll_div[i][5] << 0; - epll_con |= epll_div[i][1] << 27; - epll_con |= epll_div[i][2] << PLL46XX_MDIV_SHIFT; - epll_con |= epll_div[i][3] << PLL46XX_PDIV_SHIFT; - epll_con |= epll_div[i][4] << PLL46XX_SDIV_SHIFT; - break; - } - } - - if (i == ARRAY_SIZE(epll_div)) { - printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", - __func__); - return -EINVAL; - } - - epll_rate /= 1000000; - - /* 3000 max_cycls : specification data */ - locktime = 3000 / epll_rate * epll_div[i][3]; - lockcnt = locktime * 10000 / (10000 / epll_rate); - - __raw_writel(lockcnt, EXYNOS5_EPLL_LOCK); - - __raw_writel(epll_con, EXYNOS5_EPLL_CON0); - __raw_writel(epll_con_k, EXYNOS5_EPLL_CON1); - - do { - tmp = __raw_readl(EXYNOS5_EPLL_CON0); - } while (!(tmp & 0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT)); - - clk->rate = rate; - - return 0; -} - -static struct clk_ops exynos5_epll_ops = { - .get_rate = exynos5_epll_get_rate, - .set_rate = exynos5_epll_set_rate, -}; - -static int xtal_rate; - -static unsigned long exynos5_fout_apll_get_rate(struct clk *clk) -{ - return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS5_APLL_CON0)); -} - -static struct clk_ops exynos5_fout_apll_ops = { - .get_rate = exynos5_fout_apll_get_rate, -}; - -#ifdef CONFIG_PM -static int exynos5_clock_suspend(void) -{ - s3c_pm_do_save(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save)); - - return 0; -} - -static void exynos5_clock_resume(void) -{ - s3c_pm_do_restore_core(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save)); -} -#else -#define exynos5_clock_suspend NULL -#define exynos5_clock_resume NULL -#endif - -static struct syscore_ops exynos5_clock_syscore_ops = { - .suspend = exynos5_clock_suspend, - .resume = exynos5_clock_resume, -}; - -void __init_or_cpufreq exynos5_setup_clocks(void) -{ - struct clk *xtal_clk; - unsigned long apll; - unsigned long bpll; - unsigned long cpll; - unsigned long mpll; - unsigned long epll; - unsigned long vpll; - unsigned long vpllsrc; - unsigned long xtal; - unsigned long armclk; - unsigned long mout_cdrex; - unsigned long aclk_400; - unsigned long aclk_333; - unsigned long aclk_266; - unsigned long aclk_200; - unsigned long aclk_166; - unsigned long aclk_66; - unsigned int ptr; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - xtal_clk = clk_get(NULL, "xtal"); - BUG_ON(IS_ERR(xtal_clk)); - - xtal = clk_get_rate(xtal_clk); - - xtal_rate = xtal; - - clk_put(xtal_clk); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_APLL_CON0)); - bpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_BPLL_CON0)); - cpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_CPLL_CON0)); - mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_MPLL_CON0)); - epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS5_EPLL_CON0), - __raw_readl(EXYNOS5_EPLL_CON1)); - - vpllsrc = clk_get_rate(&exynos5_clk_vpllsrc.clk); - vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS5_VPLL_CON0), - __raw_readl(EXYNOS5_VPLL_CON1)); - - clk_fout_apll.ops = &exynos5_fout_apll_ops; - clk_fout_bpll.rate = bpll; - clk_fout_bpll_div2.rate = bpll >> 1; - clk_fout_cpll.rate = cpll; - clk_fout_mpll.rate = mpll; - clk_fout_mpll_div2.rate = mpll >> 1; - clk_fout_epll.rate = epll; - clk_fout_vpll.rate = vpll; - - printk(KERN_INFO "EXYNOS5: PLL settings, A=%ld, B=%ld, C=%ld\n" - "M=%ld, E=%ld V=%ld", - apll, bpll, cpll, mpll, epll, vpll); - - armclk = clk_get_rate(&exynos5_clk_armclk); - mout_cdrex = clk_get_rate(&exynos5_clk_cdrex.clk); - - aclk_400 = clk_get_rate(&exynos5_clk_aclk_400.clk); - aclk_333 = clk_get_rate(&exynos5_clk_aclk_333.clk); - aclk_266 = clk_get_rate(&exynos5_clk_aclk_266.clk); - aclk_200 = clk_get_rate(&exynos5_clk_aclk_200.clk); - aclk_166 = clk_get_rate(&exynos5_clk_aclk_166.clk); - aclk_66 = clk_get_rate(&exynos5_clk_aclk_66.clk); - - printk(KERN_INFO "EXYNOS5: ARMCLK=%ld, CDREX=%ld, ACLK400=%ld\n" - "ACLK333=%ld, ACLK266=%ld, ACLK200=%ld\n" - "ACLK166=%ld, ACLK66=%ld\n", - armclk, mout_cdrex, aclk_400, - aclk_333, aclk_266, aclk_200, - aclk_166, aclk_66); - - - clk_fout_epll.ops = &exynos5_epll_ops; - - if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll)) - printk(KERN_ERR "Unable to set parent %s of clock %s.\n", - clk_fout_epll.name, exynos5_clk_mout_epll.clk.name); - - clk_set_rate(&exynos5_clk_sclk_apll.clk, 100000000); - clk_set_rate(&exynos5_clk_aclk_266.clk, 300000000); - - clk_set_rate(&exynos5_clk_aclk_acp.clk, 267000000); - clk_set_rate(&exynos5_clk_pclk_acp.clk, 134000000); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrcs); ptr++) - s3c_set_clksrc(&exynos5_clksrcs[ptr], true); -} - -void __init exynos5_register_clocks(void) -{ - int ptr; - - s3c24xx_register_clocks(exynos5_clks, ARRAY_SIZE(exynos5_clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sysclks); ptr++) - s3c_register_clksrc(exynos5_sysclks[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sclk_tv); ptr++) - s3c_register_clksrc(exynos5_sclk_tv[ptr], 1); - - for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrc_cdev); ptr++) - s3c_register_clksrc(exynos5_clksrc_cdev[ptr], 1); - - s3c_register_clksrc(exynos5_clksrcs, ARRAY_SIZE(exynos5_clksrcs)); - s3c_register_clocks(exynos5_init_clocks_on, ARRAY_SIZE(exynos5_init_clocks_on)); - - s3c24xx_register_clocks(exynos5_clk_cdev, ARRAY_SIZE(exynos5_clk_cdev)); - for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clk_cdev); ptr++) - s3c_disable_clocks(exynos5_clk_cdev[ptr], 1); - - s3c_register_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off)); - s3c_disable_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off)); - clkdev_add_table(exynos5_clk_lookup, ARRAY_SIZE(exynos5_clk_lookup)); - - register_syscore_ops(&exynos5_clock_syscore_ops); - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 15718da30c45..b35c60059bb8 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -24,6 +24,8 @@ #include <linux/export.h> #include <linux/irqdomain.h> #include <linux/of_address.h> +#include <linux/clocksource.h> +#include <linux/clk-provider.h> #include <linux/irqchip/arm-gic.h> #include <linux/irqchip/chained_irq.h> @@ -37,9 +39,9 @@ #include <mach/regs-irq.h> #include <mach/regs-pmu.h> #include <mach/regs-gpio.h> +#include <mach/irqs.h> #include <plat/cpu.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/pm.h> #include <plat/sdhci.h> @@ -65,17 +67,16 @@ static const char name_exynos5440[] = "EXYNOS5440"; static void exynos4_map_io(void); static void exynos5_map_io(void); static void exynos5440_map_io(void); -static void exynos4_init_clocks(int xtal); -static void exynos5_init_clocks(int xtal); static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no); static int exynos_init(void); +unsigned long xxti_f = 0, xusbxti_f = 0; + static struct cpu_table cpu_ids[] __initdata = { { .idcode = EXYNOS4210_CPU_ID, .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, - .init_clocks = exynos4_init_clocks, .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4210, @@ -83,7 +84,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = EXYNOS4212_CPU_ID, .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, - .init_clocks = exynos4_init_clocks, .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4212, @@ -91,7 +91,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = EXYNOS4412_CPU_ID, .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, - .init_clocks = exynos4_init_clocks, .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4412, @@ -99,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = EXYNOS5250_SOC_ID, .idmask = EXYNOS5_SOC_MASK, .map_io = exynos5_map_io, - .init_clocks = exynos5_init_clocks, .init = exynos_init, .name = name_exynos5250, }, { @@ -257,11 +255,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSTIMER, - .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_SYSRAM, .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), .length = SZ_4K, @@ -402,43 +395,26 @@ static void __init exynos5_map_io(void) iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); } -static void __init exynos4_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - - if (soc_is_exynos4210()) - exynos4210_register_clocks(); - else if (soc_is_exynos4212() || soc_is_exynos4412()) - exynos4212_register_clocks(); - - exynos4_register_clocks(); - exynos4_setup_clocks(); -} - static void __init exynos5440_map_io(void) { iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); } -static void __init exynos5_init_clocks(int xtal) +void __init exynos_init_time(void) { - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - /* EXYNOS5440 can support only common clock framework */ - - if (soc_is_exynos5440()) - return; - -#ifdef CONFIG_SOC_EXYNOS5250 - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - - exynos5_register_clocks(); - exynos5_setup_clocks(); + if (of_have_populated_dt()) { +#ifdef CONFIG_OF + of_clk_init(NULL); + clocksource_of_init(); +#endif + } else { + /* todo: remove after migrating legacy E4 platforms to dt */ +#ifdef CONFIG_ARCH_EXYNOS4 + exynos4_clk_init(NULL); + exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f); #endif + mct_init(); + } } void __init exynos4_init_irq(void) @@ -824,6 +800,7 @@ static int __init exynos_init_irq_eint(void) static const struct of_device_id exynos_pinctrl_ids[] = { { .compatible = "samsung,exynos4210-pinctrl", }, { .compatible = "samsung,exynos4x12-pinctrl", }, + { .compatible = "samsung,exynos5250-pinctrl", }, }; struct device_node *pctrl_np, *wkup_np; const char *wkup_compat = "samsung,exynos4210-wakeup-eint"; @@ -877,3 +854,30 @@ static int __init exynos_init_irq_eint(void) return 0; } arch_initcall(exynos_init_irq_eint); + +static struct resource exynos4_pmu_resource[] = { + DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU), + DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU1), +#if defined(CONFIG_SOC_EXYNOS4412) + DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU2), + DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU3), +#endif +}; + +static struct platform_device exynos4_device_pmu = { + .name = "arm-pmu", + .num_resources = ARRAY_SIZE(exynos4_pmu_resource), + .resource = exynos4_pmu_resource, +}; + +static int __init exynos_armpmu_init(void) +{ + if (!of_have_populated_dt()) { + if (soc_is_exynos4210() || soc_is_exynos4212()) + exynos4_device_pmu.num_resources = 2; + platform_device_register(&exynos4_device_pmu); + } + + return 0; +} +arch_initcall(exynos_armpmu_init); diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 9339bb8954be..cb89ab886950 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -12,7 +12,11 @@ #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H #define __ARCH_ARM_MACH_EXYNOS_COMMON_H -extern void exynos4_timer_init(void); +#include <linux/of.h> + +extern void mct_init(void); +void exynos_init_time(void); +extern unsigned long xxti_f, xusbxti_f; struct map_desc; void exynos_init_io(struct map_desc *mach_desc, int size); @@ -22,6 +26,10 @@ void exynos4_restart(char mode, const char *cmd); void exynos5_restart(char mode, const char *cmd); void exynos_init_late(void); +/* ToDo: remove these after migrating legacy exynos4 platforms to dt */ +void exynos4_clk_init(struct device_node *np); +void exynos4_clk_register_fixed_ext(unsigned long, unsigned long); + #ifdef CONFIG_PM_GENERIC_DOMAINS int exynos_pm_late_initcall(void); #else diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 8bd5dde5fc78..c72f59d91fce 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -30,8 +30,6 @@ /* For EXYNOS4 and EXYNOS5 */ -#define EXYNOS_IRQ_MCT_LOCALTIMER IRQ_PPI(12) - #define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32) /* For EXYNOS4 SoCs */ @@ -128,7 +126,7 @@ #define EXYNOS4_IRQ_ADC1 IRQ_SPI(107) #define EXYNOS4_IRQ_PEN1 IRQ_SPI(108) #define EXYNOS4_IRQ_KEYPAD IRQ_SPI(109) -#define EXYNOS4_IRQ_PMU IRQ_SPI(110) +#define EXYNOS4_IRQ_POWER_PMU IRQ_SPI(110) #define EXYNOS4_IRQ_GPS IRQ_SPI(111) #define EXYNOS4_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) #define EXYNOS4_IRQ_SLIMBUS IRQ_SPI(113) @@ -136,6 +134,11 @@ #define EXYNOS4_IRQ_TSI IRQ_SPI(115) #define EXYNOS4_IRQ_SATA IRQ_SPI(116) +#define EXYNOS4_IRQ_PMU COMBINER_IRQ(2, 2) +#define EXYNOS4_IRQ_PMU_CPU1 COMBINER_IRQ(3, 2) +#define EXYNOS4_IRQ_PMU_CPU2 COMBINER_IRQ(18, 2) +#define EXYNOS4_IRQ_PMU_CPU3 COMBINER_IRQ(19, 2) + #define EXYNOS4_IRQ_TMU_TRIG0 COMBINER_IRQ(2, 4) #define EXYNOS4_IRQ_TMU_TRIG1 COMBINER_IRQ(3, 4) @@ -168,7 +171,10 @@ #define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1) #define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2) -#define EXYNOS4_MAX_COMBINER_NR 16 +#define EXYNOS4210_MAX_COMBINER_NR 16 +#define EXYNOS4212_MAX_COMBINER_NR 18 +#define EXYNOS4412_MAX_COMBINER_NR 20 +#define EXYNOS4_MAX_COMBINER_NR EXYNOS4412_MAX_COMBINER_NR #define EXYNOS4_IRQ_GPIO1_NR_GROUPS 16 #define EXYNOS4_IRQ_GPIO2_NR_GROUPS 9 @@ -233,7 +239,6 @@ #define IRQ_TC EXYNOS4_IRQ_PEN0 #define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD -#define IRQ_PMU EXYNOS4_IRQ_PMU #define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO #define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC @@ -323,8 +328,6 @@ #define EXYNOS5_IRQ_CEC IRQ_SPI(114) #define EXYNOS5_IRQ_SATA IRQ_SPI(115) -#define EXYNOS5_IRQ_MCT_L0 IRQ_SPI(120) -#define EXYNOS5_IRQ_MCT_L1 IRQ_SPI(121) #define EXYNOS5_IRQ_MMC44 IRQ_SPI(123) #define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124) #define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125) @@ -419,8 +422,6 @@ #define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4) #define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0) -#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3) -#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4) #define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0) #define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1) diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 1df6abbf53b8..7f99b7b187d6 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -65,7 +65,6 @@ #define EXYNOS5_PA_CMU 0x10010000 #define EXYNOS4_PA_SYSTIMER 0x10050000 -#define EXYNOS5_PA_SYSTIMER 0x101C0000 #define EXYNOS4_PA_WATCHDOG 0x10060000 #define EXYNOS5_PA_WATCHDOG 0x101D0000 diff --git a/arch/arm/mach-exynos/include/mach/regs-mct.h b/arch/arm/mach-exynos/include/mach/regs-mct.h deleted file mode 100644 index 80dd02ad6d61..000000000000 --- a/arch/arm/mach-exynos/include/mach/regs-mct.h +++ /dev/null @@ -1,53 +0,0 @@ -/* arch/arm/mach-exynos4/include/mach/regs-mct.h - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 MCT configutation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_MCT_H -#define __ASM_ARCH_REGS_MCT_H __FILE__ - -#include <mach/map.h> - -#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x)) - -#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100) -#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104) -#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110) - -#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200) -#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204) -#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208) - -#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240) - -#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244) -#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248) -#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C) - -#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300) -#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x)) -#define EXYNOS4_MCT_L_MASK (0xffffff00) - -#define MCT_L_TCNTB_OFFSET (0x00) -#define MCT_L_ICNTB_OFFSET (0x08) -#define MCT_L_TCON_OFFSET (0x20) -#define MCT_L_INT_CSTAT_OFFSET (0x30) -#define MCT_L_INT_ENB_OFFSET (0x34) -#define MCT_L_WSTAT_OFFSET (0x40) - -#define MCT_G_TCON_START (1 << 8) -#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1) -#define MCT_G_TCON_COMP0_ENABLE (1 << 0) - -#define MCT_L_TCON_INTERVAL_MODE (1 << 2) -#define MCT_L_TCON_INT_START (1 << 1) -#define MCT_L_TCON_TIMER_START (1 << 0) - -#endif /* __ASM_ARCH_REGS_MCT_H */ diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c index 2126f3503a3f..5f0f55701374 100644 --- a/arch/arm/mach-exynos/mach-armlex4210.c +++ b/arch/arm/mach-exynos/mach-armlex4210.c @@ -178,7 +178,6 @@ static void __init armlex4210_smsc911x_init(void) static void __init armlex4210_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(armlex4210_uartcfgs, ARRAY_SIZE(armlex4210_uartcfgs)); } @@ -203,6 +202,6 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210") .map_io = armlex4210_map_io, .init_machine = armlex4210_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index 3358088c822a..ac27f3cd121f 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -11,121 +11,26 @@ * published by the Free Software Foundation. */ +#include <linux/kernel.h> #include <linux/of_platform.h> +#include <linux/of_fdt.h> #include <linux/serial_core.h> +#include <linux/memblock.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> -#include <mach/map.h> - -#include <plat/cpu.h> -#include <plat/regs-serial.h> +#include <plat/mfc.h> #include "common.h" -/* - * The following lookup table is used to override device names when devices - * are registered from device tree. This is temporarily added to enable - * device tree support addition for the Exynos4 architecture. - * - * For drivers that require platform data to be provided from the machine - * file, a platform data pointer can also be supplied along with the - * devices names. Usually, the platform data elements that cannot be parsed - * from the device tree by the drivers (example: function pointers) are - * supplied. But it should be noted that this is a temporary mechanism and - * at some point, the drivers should be capable of parsing all the platform - * data from the device tree. - */ -static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0, - "exynos4210-uart.0", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1, - "exynos4210-uart.1", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART2, - "exynos4210-uart.2", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART3, - "exynos4210-uart.3", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0), - "exynos4-sdhci.0", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1), - "exynos4-sdhci.1", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2), - "exynos4-sdhci.2", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3), - "exynos4-sdhci.3", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0), - "s3c2440-i2c.0", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1), - "s3c2440-i2c.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(2), - "s3c2440-i2c.2", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(3), - "s3c2440-i2c.3", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(4), - "s3c2440-i2c.4", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(5), - "s3c2440-i2c.5", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(6), - "s3c2440-i2c.6", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(7), - "s3c2440-i2c.7", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0, - "exynos4210-spi.0", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1, - "exynos4210-spi.1", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2, - "exynos4210-spi.2", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_MDMA1, "dma-pl330.2", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU, - "exynos-tmu", NULL), - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13620000, - "exynos-sysmmu.0", NULL), /* MFC_L */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13630000, - "exynos-sysmmu.1", NULL), /* MFC_R */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E20000, - "exynos-sysmmu.2", NULL), /* TV */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A60000, - "exynos-sysmmu.3", NULL), /* JPEG */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A30000, - "exynos-sysmmu.4", NULL), /* ROTATOR */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A20000, - "exynos-sysmmu.5", NULL), /* FIMC0 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A30000, - "exynos-sysmmu.6", NULL), /* FIMC1 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A40000, - "exynos-sysmmu.7", NULL), /* FIMC2 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A50000, - "exynos-sysmmu.8", NULL), /* FIMC3 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A20000, - "exynos-sysmmu.9", NULL), /* G2D(4210) */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A40000, - "exynos-sysmmu.9", NULL), /* G2D(4x12) */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11E20000, - "exynos-sysmmu.10", NULL), /* FIMD0 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12220000, - "exynos-sysmmu.11", NULL), /* FIMD1(4210) */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12260000, - "exynos-sysmmu.12", NULL), /* IS0(4x12) */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x122B0000, - "exynos-sysmmu.13", NULL), /* IS1(4x12) */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123B0000, - "exynos-sysmmu.14", NULL), /* FIMC-LITE0(4x12) */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123C0000, - "exynos-sysmmu.15", NULL), /* FIMC-LITE1(4x12) */ - {}, -}; - static void __init exynos4_dt_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); } static void __init exynos4_dt_machine_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - exynos4_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static char const *exynos4_dt_compat[] __initdata = { @@ -135,6 +40,18 @@ static char const *exynos4_dt_compat[] __initdata = { NULL }; +static void __init exynos4_reserve(void) +{ +#ifdef CONFIG_S5P_DEV_MFC + struct s5p_mfc_dt_meminfo mfc_mem; + + /* Reserve memory for MFC only if it's available */ + mfc_mem.compatible = "samsung,mfc-v5"; + if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem)) + s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff, + mfc_mem.lsize); +#endif +} DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ .smp = smp_ops(exynos_smp_ops), @@ -142,7 +59,8 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") .map_io = exynos4_dt_map_io, .init_machine = exynos4_dt_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .dt_compat = exynos4_dt_compat, .restart = exynos4_restart, + .reserve = exynos4_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index acaeb14db54b..753b94f3fca7 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -11,151 +11,21 @@ #include <linux/of_platform.h> #include <linux/of_fdt.h> -#include <linux/serial_core.h> #include <linux/memblock.h> #include <linux/io.h> +#include <linux/clocksource.h> #include <asm/mach/arch.h> -#include <mach/map.h> #include <mach/regs-pmu.h> #include <plat/cpu.h> -#include <plat/regs-serial.h> #include <plat/mfc.h> #include "common.h" -/* - * The following lookup table is used to override device names when devices - * are registered from device tree. This is temporarily added to enable - * device tree support addition for the EXYNOS5 architecture. - * - * For drivers that require platform data to be provided from the machine - * file, a platform data pointer can also be supplied along with the - * devices names. Usually, the platform data elements that cannot be parsed - * from the device tree by the drivers (example: function pointers) are - * supplied. But it should be noted that this is a temporary mechanism and - * at some point, the drivers should be capable of parsing all the platform - * data from the device tree. - */ -static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0, - "exynos4210-uart.0", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1, - "exynos4210-uart.1", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2, - "exynos4210-uart.2", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3, - "exynos4210-uart.3", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0), - "s3c2440-i2c.0", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1), - "s3c2440-i2c.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(2), - "s3c2440-i2c.2", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(3), - "s3c2440-i2c.3", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(4), - "s3c2440-i2c.4", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(5), - "s3c2440-i2c.5", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(6), - "s3c2440-i2c.6", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(7), - "s3c2440-i2c.7", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-hdmiphy-i2c", EXYNOS5_PA_IIC(8), - "s3c2440-hdmiphy-i2c", NULL), - OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0, - "dw_mmc.0", NULL), - OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1, - "dw_mmc.1", NULL), - OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI2, - "dw_mmc.2", NULL), - OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI3, - "dw_mmc.3", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0, - "exynos4210-spi.0", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1, - "exynos4210-spi.1", NULL), - OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2, - "exynos4210-spi.2", NULL), - OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000, - "exynos5-sata", NULL), - OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000, - "exynos5-sata-phy", NULL), - OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000, - "exynos5-sata-phy-i2c", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), - OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0, - "exynos-gsc.0", NULL), - OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1, - "exynos-gsc.1", NULL), - OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2, - "exynos-gsc.2", NULL), - OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3, - "exynos-gsc.3", NULL), - OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000, - "exynos5-hdmi", NULL), - OF_DEV_AUXDATA("samsung,exynos5-mixer", 0x14450000, - "exynos5-mixer", NULL), - OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL), - OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000, - "exynos-tmu", NULL), - OF_DEV_AUXDATA("samsung,i2s-v5", 0x03830000, - "samsung-i2s.0", NULL), - OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D60000, - "samsung-i2s.1", NULL), - OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D70000, - "samsung-i2s.2", NULL), - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11210000, - "exynos-sysmmu.0", "mfc"), /* MFC_L */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11200000, - "exynos-sysmmu.1", "mfc"), /* MFC_R */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14650000, - "exynos-sysmmu.2", NULL), /* TV */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11F20000, - "exynos-sysmmu.3", "jpeg"), /* JPEG */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11D40000, - "exynos-sysmmu.4", NULL), /* ROTATOR */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E80000, - "exynos-sysmmu.5", "gscl"), /* GSCL0 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E90000, - "exynos-sysmmu.6", "gscl"), /* GSCL1 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EA0000, - "exynos-sysmmu.7", "gscl"), /* GSCL2 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EB0000, - "exynos-sysmmu.8", "gscl"), /* GSCL3 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13260000, - "exynos-sysmmu.9", NULL), /* FIMC-IS0 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x132C0000, - "exynos-sysmmu.10", NULL), /* FIMC-IS1 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14640000, - "exynos-sysmmu.11", NULL), /* FIMD1 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C40000, - "exynos-sysmmu.12", NULL), /* FIMC-LITE0 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C50000, - "exynos-sysmmu.13", NULL), /* FIMC-LITE1 */ - OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A60000, - "exynos-sysmmu.14", NULL), /* G2D */ - {}, -}; - -static const struct of_dev_auxdata exynos5440_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5440_PA_UART0, - "exynos4210-uart.0", NULL), - {}, -}; - static void __init exynos5_dt_map_io(void) { - unsigned long root = of_get_flat_dt_root(); - exynos_init_io(NULL, 0); - - if (of_flat_dt_is_compatible(root, "samsung,exynos5250")) - s3c24xx_init_clocks(24000000); } static void __init exynos5_dt_machine_init(void) @@ -182,12 +52,7 @@ static void __init exynos5_dt_machine_init(void) } } - if (of_machine_is_compatible("samsung,exynos5250")) - of_platform_populate(NULL, of_default_bus_match_table, - exynos5250_auxdata_lookup, NULL); - else if (of_machine_is_compatible("samsung,exynos5440")) - of_platform_populate(NULL, of_default_bus_match_table, - exynos5440_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static char const *exynos5_dt_compat[] __initdata = { @@ -216,7 +81,7 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") .map_io = exynos5_dt_map_io, .init_machine = exynos5_dt_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .dt_compat = exynos5_dt_compat, .restart = exynos5_restart, .reserve = exynos5_reserve, diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 2517406e7f56..5c8b2878dbbd 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -1331,8 +1331,9 @@ static struct platform_device *nuri_devices[] __initdata = { static void __init nuri_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); + xxti_f = 0; + xusbxti_f = 24000000; } static void __init nuri_reserve(void) @@ -1381,7 +1382,7 @@ MACHINE_START(NURI, "NURI") .map_io = nuri_map_io, .init_machine = nuri_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .reserve = &nuri_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index ec42024dd13f..27f03ed5d067 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -755,8 +755,9 @@ static void s5p_tv_setup(void) static void __init origen_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs)); + xxti_f = 0; + xusbxti_f = 24000000; } static void __init origen_power_init(void) @@ -816,7 +817,7 @@ MACHINE_START(ORIGEN, "ORIGEN") .map_io = origen_map_io, .init_machine = origen_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .reserve = &origen_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index 5df91236dbb4..2c8af9617920 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -323,7 +323,6 @@ static struct platform_device *smdk4x12_devices[] __initdata = { static void __init smdk4x12_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs)); } @@ -377,7 +376,7 @@ MACHINE_START(SMDK4212, "SMDK4212") .init_irq = exynos4_init_irq, .map_io = smdk4x12_map_io, .init_machine = smdk4x12_machine_init, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .restart = exynos4_restart, .reserve = &smdk4x12_reserve, MACHINE_END @@ -391,7 +390,7 @@ MACHINE_START(SMDK4412, "SMDK4412") .map_io = smdk4x12_map_io, .init_machine = smdk4x12_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .restart = exynos4_restart, .reserve = &smdk4x12_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 9680e1291065..d95b8cf85253 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -372,8 +372,9 @@ static void s5p_tv_setup(void) static void __init smdkv310_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); + xxti_f = 12000000; + xusbxti_f = 24000000; } static void __init smdkv310_reserve(void) @@ -424,7 +425,7 @@ MACHINE_START(SMDKV310, "SMDKV310") .init_irq = exynos4_init_irq, .map_io = smdkv310_map_io, .init_machine = smdkv310_machine_init, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .reserve = &smdkv310_reserve, .restart = exynos4_restart, MACHINE_END @@ -437,7 +438,7 @@ MACHINE_START(SMDKC210, "SMDKC210") .map_io = smdkv310_map_io, .init_machine = smdkv310_machine_init, .init_late = exynos_init_late, - .init_time = exynos4_timer_init, + .init_time = exynos_init_time, .reserve = &smdkv310_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index d28c7fbaba2d..327d50d4681d 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -41,7 +41,7 @@ #include <plat/mfc.h> #include <plat/sdhci.h> #include <plat/fimc-core.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include <plat/camport.h> #include <mach/map.h> @@ -1093,9 +1093,10 @@ static struct platform_device *universal_devices[] __initdata = { static void __init universal_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); - s5p_set_timer_source(S5P_PWM2, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); + xxti_f = 0; + xusbxti_f = 24000000; } static void s5p_tv_setup(void) @@ -1153,7 +1154,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .init_machine = universal_machine_init, .init_late = exynos_init_late, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 2612eeaa5889..a4d4664894e1 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -445,16 +445,23 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 57, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = 61, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 57, - .reset_gpio_port[1] = 61, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -606,6 +613,8 @@ static void __init omap_3430sdp_init(void) board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); sdp3430_display_init(); enable_board_wakeup_source(); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 67447bd4564f..20d6d8189240 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -53,16 +53,23 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 126, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = 61, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 126, - .reset_gpio_port[1] = 61, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -199,6 +206,8 @@ static void __init omap_sdp_init(void) board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16); enable_board_wakeup_source(); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 7d3358b2e593..fc53911d0d13 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -47,15 +47,17 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = GPIO_USB_NRESET, + .vcc_gpio = GPIO_USB_POWER, + .vcc_polarity = 1, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = GPIO_USB_NRESET, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; static struct mtd_partition crane_nand_partitions[] = { @@ -131,13 +133,7 @@ static void __init am3517_crane_init(void) return; } - ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH, - "usb_ehci_enable"); - if (ret < 0) { - pr_err("Can not request GPIO %d\n", GPIO_USB_POWER); - return; - } - + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 1d6c28872505..c29d2e743688 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -273,6 +273,14 @@ static __init void am3517_evm_mcbsp1_init(void) omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 57, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ @@ -281,12 +289,6 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = { #else .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, #endif - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 57, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -348,7 +350,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; - static void __init am3517_evm_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -360,6 +361,8 @@ static void __init am3517_evm_init(void) /* Configure GPIO for EHCI port */ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); am3517_evm_hecc_init(&am3517_evm_hecc_pdata); /* DSS */ diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index bccd3e51fecb..e0ed8c07fc54 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -418,15 +418,22 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = OMAP_MAX_GPIO_LINES + 6, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = OMAP_MAX_GPIO_LINES + 7, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6, - .reset_gpio_port[1] = OMAP_MAX_GPIO_LINES + 7, - .reset_gpio_port[2] = -EINVAL }; static void __init cm_t35_init_usbh(void) @@ -443,6 +450,7 @@ static void __init cm_t35_init_usbh(void) msleep(1); } + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index a66da808cc4a..4eb5e6f2f7f5 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -188,15 +188,22 @@ static inline void cm_t3517_init_rtc(void) {} #define HSUSB2_RESET_GPIO (147) #define USB_HUB_RESET_GPIO (152) +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = HSUSB1_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = HSUSB2_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = HSUSB1_RESET_GPIO, - .reset_gpio_port[1] = HSUSB2_RESET_GPIO, - .reset_gpio_port[2] = -EINVAL, }; static int __init cm_t3517_init_usbh(void) @@ -213,6 +220,7 @@ static int __init cm_t3517_init_usbh(void) msleep(1); } + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&cm_t3517_ehci_pdata); return 0; @@ -324,6 +332,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3517_init, .init_late = am35xx_init_late, - .init_time = omap3_gp_gptimer_timer_init, + .init_time = omap3_gptimer_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 12d2126a2382..e44b804f75ae 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -436,15 +436,7 @@ static struct platform_device *devkit8000_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index e54a48060198..78813b397209 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -140,7 +140,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, - .init_time = omap3_am33xx_gptimer_timer_init, + .init_time = omap3_gptimer_timer_init, .dt_compat = am33xx_boards_compat, .restart = am33xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index e979d48270c9..b54562d1235e 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -527,26 +527,28 @@ static void __init igep_i2c_init(void) omap3_pmic_init("twl4030", &igep_twldata); } +static struct usbhs_phy_data igep2_phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = IGEP2_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + +static struct usbhs_phy_data igep3_phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = IGEP3_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL, }; static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL, }; #ifdef CONFIG_OMAP_MUX @@ -642,8 +644,10 @@ static void __init igep_init(void) if (machine_is_igep0020()) { omap_display_init(&igep2_dss_data); igep2_init_smsc911x(); + usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data)); usbhs_init(&igep2_usbhs_bdata); } else { + usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data)); usbhs_init(&igep3_usbhs_bdata); } } diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index fff141330a63..6de78605c0af 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,6 +33,7 @@ #include <linux/mtd/nand.h> #include <linux/mmc/host.h> #include <linux/usb/phy.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -277,6 +278,21 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = { static struct gpio_led gpio_leds[]; +/* PHY's VCC regulator might be added later, so flag that we need it */ +static struct nop_usb_xceiv_platform_data hsusb2_phy_data = { + .needs_vcc = true, +}; + +static struct usbhs_phy_data phy_data[] = { + { + .port = 2, + .reset_gpio = 147, + .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */ + .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */ + .platform_data = &hsusb2_phy_data, + }, +}; + static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -318,9 +334,11 @@ static int beagle_twl_gpio_setup(struct device *dev, } dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; - gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, - "nEN_USB_PWR"); + /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */ + phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX; + phy_data[0].vcc_polarity = beagle_config.usb_pwr_level; + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); return 0; } @@ -453,15 +471,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -543,7 +553,9 @@ static void __init omap3_beagle_init(void) usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + usbhs_init(&usbhs_bdata); + board_nand_init(omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, NAND_BUSWIDTH_16, NULL); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 233a0d528fcf..4f1bbc3cc29b 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -496,7 +496,7 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ - REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ REGULATOR_SUPPLY("vaux2", NULL), }; @@ -539,17 +539,16 @@ static int __init omap3_evm_i2c_init(void) return 0; } -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = -1, /* set at runtime */ + .vcc_gpio = -EINVAL, + }, +}; - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - /* PHY reset GPIO will be runtime programmed based on EVM version */ - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -725,7 +724,7 @@ static void __init omap3_evm_init(void) /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); - usbhs_bdata.reset_gpio_port[1] = 21; + phy_data[0].reset_gpio = 21; /* EVM REV >= E can supply 500mA with EXTVBUS programming */ musb_board_data.power = 500; @@ -733,10 +732,12 @@ static void __init omap3_evm_init(void) } else { /* setup EHCI phy reset on MDC */ omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); - usbhs_bdata.reset_gpio_port[1] = 135; + phy_data[0].reset_gpio = 135; } usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(&musb_board_data); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); board_nand_init(omap3evm_nand_partitions, ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2bba362148a0..1004d2aaa68f 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -346,7 +346,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { }; static struct regulator_consumer_supply pandora_usb_phy_supply[] = { - REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ }; /* ads7846 on SPI and 2 nub controllers on I2C */ @@ -561,6 +561,14 @@ fail: printk(KERN_ERR "wl1251 board initialisation failed\n"); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 16, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_leds_gpio, &pandora_keys_gpio, @@ -569,15 +577,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 16, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -601,7 +601,10 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); gpmc_nand_init(&pandora_nand_data, NULL); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 495b989f9040..8afbba0923d6 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -357,19 +357,20 @@ static int __init omap3_stalker_i2c_init(void) #define OMAP3_STALKER_TS_GPIO 175 +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 21, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 21, - .reset_gpio_port[2] = -EINVAL, }; #ifdef CONFIG_OMAP_MUX @@ -406,6 +407,8 @@ static void __init omap3_stalker_init(void) omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index bcd44fbcd877..7da48bc42bbf 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -305,21 +305,22 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 147, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3_touchbook_devices[] __initdata = { &leds_gpio, &keys_gpio, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, - .reset_gpio_port[2] = -EINVAL }; static void omap3_touchbook_poweroff(void) @@ -368,6 +369,8 @@ static void __init omap3_touchbook_init(void) omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); board_nand_init(omap3touchbook_nand_partitions, ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index b02c2f00609b..a71ad345f20d 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -31,6 +31,7 @@ #include <linux/ti_wilink_st.h> #include <linux/usb/musb.h> #include <linux/usb/phy.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/wl12xx.h> #include <linux/irqchip/arm-gic.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -132,6 +133,22 @@ static struct platform_device btwilink_device = { .id = -1, }; +/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */ +static struct nop_usb_xceiv_platform_data hsusb1_phy_data = { + /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */ + .clk_rate = 19200000, +}; + +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = GPIO_HUB_NRESET, + .vcc_gpio = GPIO_HUB_POWER, + .vcc_polarity = 1, + .platform_data = &hsusb1_phy_data, + }, +}; + static struct platform_device *panda_devices[] __initdata = { &leds_gpio, &wl1271_device, @@ -142,49 +159,19 @@ static struct platform_device *panda_devices[] __initdata = { static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = false, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL -}; - -static struct gpio panda_ehci_gpios[] __initdata = { - { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" }, - { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" }, }; static void __init omap4_ehci_init(void) { int ret; - struct clk *phy_ref_clk; /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */ - phy_ref_clk = clk_get(NULL, "auxclk3_ck"); - if (IS_ERR(phy_ref_clk)) { - pr_err("Cannot request auxclk3\n"); - return; - } - clk_set_rate(phy_ref_clk, 19200000); - clk_prepare_enable(phy_ref_clk); - - /* disable the power to the usb hub prior to init and reset phy+hub */ - ret = gpio_request_array(panda_ehci_gpios, - ARRAY_SIZE(panda_ehci_gpios)); - if (ret) { - pr_err("Unable to initialize EHCI power/reset\n"); - return; - } - - gpio_export(GPIO_HUB_POWER, 0); - gpio_export(GPIO_HUB_NRESET, 0); - gpio_set_value(GPIO_HUB_NRESET, 1); + ret = clk_add_alias("main_clk", "nop_usb_xceiv.1", "auxclk3_ck", NULL); + if (ret) + pr_err("Failed to add main_clk alias to auxclk3_ck\n"); + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); - - /* enable power to hub */ - gpio_set_value(GPIO_HUB_POWER, 1); } static struct omap_musb_board_data musb_board_data = { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 630833235cbc..f9101407cd56 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -457,14 +457,16 @@ static int __init overo_spi_init(void) return 0; } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = OVERO_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -501,6 +503,8 @@ static void __init overo_init(void) ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); overo_spi_init(); overo_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 5e4d4c9fe61a..1a3dd865d8eb 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -92,14 +92,16 @@ static struct mtd_partition zoom_nand_partitions[] = { }, }; +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = ZOOM3_EHCI_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO, - .reset_gpio_port[2] = -EINVAL, }; static void __init omap_zoom_init(void) @@ -109,6 +111,8 @@ static void __init omap_zoom_init(void) } else if (machine_is_omap_zoom3()) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index df00e7580aa7..d555cf2459e1 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -82,8 +82,7 @@ extern void omap2_init_common_infrastructure(void); extern void omap2_sync32k_timer_init(void); extern void omap3_sync32k_timer_init(void); extern void omap3_secure_sync32k_timer_init(void); -extern void omap3_gp_gptimer_timer_init(void); -extern void omap3_am33xx_gptimer_timer_init(void); +extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); extern void omap5_realtime_timer_init(void); diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index afc1e8c32d6c..d9c27195caf0 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -74,14 +74,6 @@ static int omap2_nand_gpmc_retime( t.cs_wr_off = gpmc_t->cs_wr_off; t.wr_cycle = gpmc_t->wr_cycle; - /* Configure GPMC */ - if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1); - else - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0); - gpmc_cs_configure(gpmc_nand_data->cs, - GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND); - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0); err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t); if (err) return err; @@ -115,14 +107,18 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, struct gpmc_timings *gpmc_t) { int err = 0; + struct gpmc_settings s; struct device *dev = &gpmc_nand_device.dev; + memset(&s, 0, sizeof(struct gpmc_settings)); + gpmc_nand_device.dev.platform_data = gpmc_nand_data; err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE, (unsigned long *)&gpmc_nand_resource[0].start); if (err < 0) { - dev_err(dev, "Cannot request GPMC CS\n"); + dev_err(dev, "Cannot request GPMC CS %d, error %d\n", + gpmc_nand_data->cs, err); return err; } @@ -140,11 +136,31 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, dev_err(dev, "Unable to set gpmc timings: %d\n", err); return err; } - } - /* Enable RD PIN Monitoring Reg */ - if (gpmc_nand_data->dev_ready) { - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1); + if (gpmc_nand_data->of_node) { + gpmc_read_settings_dt(gpmc_nand_data->of_node, &s); + } else { + s.device_nand = true; + + /* Enable RD PIN Monitoring Reg */ + if (gpmc_nand_data->dev_ready) { + s.wait_on_read = true; + s.wait_on_write = true; + } + } + + if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) + s.device_width = GPMC_DEVWIDTH_16BIT; + else + s.device_width = GPMC_DEVWIDTH_8BIT; + + err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s); + if (err < 0) + goto out_free_cs; + + err = gpmc_configure(GPMC_CONFIG_WP, 0); + if (err < 0) + goto out_free_cs; } gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 0d75889c0a6f..64b5a8346982 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -47,11 +47,23 @@ static struct platform_device gpmc_onenand_device = { .resource = &gpmc_onenand_resource, }; -static struct gpmc_timings omap2_onenand_calc_async_timings(void) +static struct gpmc_settings onenand_async = { + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, +}; + +static struct gpmc_settings onenand_sync = { + .burst_read = true, + .burst_wrap = true, + .burst_len = GPMC_BURST_16, + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, + .wait_pin = 0, +}; + +static void omap2_onenand_calc_async_timings(struct gpmc_timings *t) { struct gpmc_device_timings dev_t; - struct gpmc_timings t; - const int t_cer = 15; const int t_avdp = 12; const int t_aavdh = 7; @@ -64,7 +76,6 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void) memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; dev_t.t_avdp_r = max_t(int, t_avdp, t_cer) * 1000; dev_t.t_avdp_w = dev_t.t_avdp_r; dev_t.t_aavdh = t_aavdh * 1000; @@ -76,19 +87,7 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void) dev_t.t_wpl = t_wpl * 1000; dev_t.t_wph = t_wph * 1000; - gpmc_calc_timings(&t, &dev_t); - - return t; -} - -static int gpmc_set_async_mode(int cs, struct gpmc_timings *t) -{ - /* Configure GPMC for asynchronous read */ - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, - GPMC_CONFIG1_DEVICESIZE_16 | - GPMC_CONFIG1_MUXADDDATA); - - return gpmc_cs_set_timings(cs, t); + gpmc_calc_timings(t, &onenand_async, &dev_t); } static void omap2_onenand_set_async_mode(void __iomem *onenand_base) @@ -158,12 +157,11 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, return freq; } -static struct gpmc_timings -omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, - int freq) +static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t, + unsigned int flags, + int freq) { struct gpmc_device_timings dev_t; - struct gpmc_timings t; const int t_cer = 15; const int t_avdp = 12; const int t_cez = 20; /* max of t_cez, t_oez */ @@ -172,9 +170,9 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; int div, gpmc_clk_ns; - if (cfg->flags & ONENAND_SYNC_READ) + if (flags & ONENAND_SYNC_READ) onenand_flags = ONENAND_FLAG_SYNCREAD; - else if (cfg->flags & ONENAND_SYNC_READWRITE) + else if (flags & ONENAND_SYNC_READWRITE) onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE; switch (freq) { @@ -239,10 +237,11 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, /* Set synchronous read timings */ memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; - dev_t.sync_read = true; + if (onenand_flags & ONENAND_FLAG_SYNCREAD) + onenand_sync.sync_read = true; if (onenand_flags & ONENAND_FLAG_SYNCWRITE) { - dev_t.sync_write = true; + onenand_sync.sync_write = true; + onenand_sync.burst_write = true; } else { dev_t.t_avdp_w = max(t_avdp, t_cer) * 1000; dev_t.t_wpl = t_wpl * 1000; @@ -265,32 +264,7 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, dev_t.cyc_aavdh_oe = 1; dev_t.t_rdyo = t_rdyo * 1000 + min_gpmc_clk_period; - gpmc_calc_timings(&t, &dev_t); - - return t; -} - -static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t) -{ - unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD; - unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE; - - /* Configure GPMC for synchronous read */ - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, - GPMC_CONFIG1_WRAPBURST_SUPP | - GPMC_CONFIG1_READMULTIPLE_SUPP | - (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) | - (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) | - (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) | - GPMC_CONFIG1_PAGE_LEN(2) | - (cpu_is_omap34xx() ? 0 : - (GPMC_CONFIG1_WAIT_READ_MON | - GPMC_CONFIG1_WAIT_PIN_SEL(0))) | - GPMC_CONFIG1_DEVICESIZE_16 | - GPMC_CONFIG1_DEVICETYPE_NOR | - GPMC_CONFIG1_MUXADDDATA); - - return gpmc_cs_set_timings(cs, t); + gpmc_calc_timings(t, &onenand_sync, &dev_t); } static int omap2_onenand_setup_async(void __iomem *onenand_base) @@ -298,11 +272,19 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) struct gpmc_timings t; int ret; + if (gpmc_onenand_data->of_node) + gpmc_read_settings_dt(gpmc_onenand_data->of_node, + &onenand_async); + omap2_onenand_set_async_mode(onenand_base); - t = omap2_onenand_calc_async_timings(); + omap2_onenand_calc_async_timings(&t); + + ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async); + if (ret < 0) + return ret; - ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t); + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t); if (ret < 0) return ret; @@ -322,9 +304,25 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) set_onenand_cfg(onenand_base); } - t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq); + if (gpmc_onenand_data->of_node) { + gpmc_read_settings_dt(gpmc_onenand_data->of_node, + &onenand_sync); + } else { + /* + * FIXME: Appears to be legacy code from initial ONENAND commit. + * Unclear what boards this is for and if this can be removed. + */ + if (!cpu_is_omap34xx()) + onenand_sync.wait_on_read = true; + } - ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t); + omap2_onenand_calc_sync_timings(&t, gpmc_onenand_data->flags, freq); + + ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_sync); + if (ret < 0) + return ret; + + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t); if (ret < 0) return ret; @@ -359,6 +357,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) { int err; + struct device *dev = &gpmc_onenand_device.dev; gpmc_onenand_data = _onenand_data; gpmc_onenand_data->onenand_setup = gpmc_onenand_setup; @@ -366,7 +365,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) if (cpu_is_omap24xx() && (gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) { - printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n"); + dev_warn(dev, "OneNAND using only SYNC_READ on 24xx\n"); gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE; gpmc_onenand_data->flags |= ONENAND_SYNC_READ; } @@ -379,7 +378,8 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, (unsigned long *)&gpmc_onenand_resource.start); if (err < 0) { - pr_err("%s: Cannot request GPMC CS\n", __func__); + dev_err(dev, "Cannot request GPMC CS %d, error %d\n", + gpmc_onenand_data->cs, err); return; } @@ -387,7 +387,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) ONENAND_IO_SIZE - 1; if (platform_device_register(&gpmc_onenand_device) < 0) { - pr_err("%s: Unable to register OneNAND device\n", __func__); + dev_err(dev, "Unable to register OneNAND device\n"); gpmc_cs_free(gpmc_onenand_data->cs); return; } diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 11d0b756f098..61a063595e66 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -49,6 +49,10 @@ static struct platform_device gpmc_smc91x_device = { .resource = gpmc_smc91x_resources, }; +static struct gpmc_settings smc91x_settings = { + .device_width = GPMC_DEVWIDTH_16BIT, +}; + /* * Set the gpmc timings for smc91c96. The timings are taken * from the data sheet available at: @@ -67,18 +71,6 @@ static int smc91c96_gpmc_retime(void) const int t7 = 5; /* Figure 12.4 write */ const int t8 = 5; /* Figure 12.4 write */ const int t20 = 185; /* Figure 12.2 read and 12.4 write */ - u32 l; - - l = GPMC_CONFIG1_DEVICESIZE_16; - if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) - l |= GPMC_CONFIG1_MUXADDDATA; - if (gpmc_cfg->flags & GPMC_READ_MON) - l |= GPMC_CONFIG1_WAIT_READ_MON; - if (gpmc_cfg->flags & GPMC_WRITE_MON) - l |= GPMC_CONFIG1_WAIT_WRITE_MON; - if (gpmc_cfg->wait_pin) - l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin); - gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l); /* * FIXME: Calculate the address and data bus muxed timings. @@ -104,7 +96,7 @@ static int smc91c96_gpmc_retime(void) dev_t.t_cez_w = t4_w * 1000; dev_t.t_wr_cycle = (t20 - t3) * 1000; - gpmc_calc_timings(&t, &dev_t); + gpmc_calc_timings(&t, &smc91x_settings, &dev_t); return gpmc_cs_set_timings(gpmc_cfg->cs, &t); } @@ -133,6 +125,18 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f; gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK); + if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) + smc91x_settings.mux_add_data = GPMC_MUX_AD; + if (gpmc_cfg->flags & GPMC_READ_MON) + smc91x_settings.wait_on_read = true; + if (gpmc_cfg->flags & GPMC_WRITE_MON) + smc91x_settings.wait_on_write = true; + if (gpmc_cfg->wait_pin) + smc91x_settings.wait_pin = gpmc_cfg->wait_pin; + ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings); + if (ret < 0) + goto free1; + if (gpmc_cfg->retime) { ret = gpmc_cfg->retime(); if (ret != 0) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 6de31739b45c..ed946df5ad8a 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -26,6 +26,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_mtd.h> #include <linux/of_device.h> #include <linux/mtd/nand.h> @@ -91,9 +92,7 @@ #define GPMC_CS_SIZE 0x30 #define GPMC_BCH_SIZE 0x10 -#define GPMC_MEM_START 0x00000000 #define GPMC_MEM_END 0x3FFFFFFF -#define BOOT_ROM_SPACE 0x100000 /* 1MB */ #define GPMC_CHUNK_SHIFT 24 /* 16 MB */ #define GPMC_SECTION_SHIFT 28 /* 128 MB */ @@ -107,6 +106,9 @@ #define GPMC_HAS_WR_ACCESS 0x1 #define GPMC_HAS_WR_DATA_MUX_BUS 0x2 +#define GPMC_HAS_MUX_AAD 0x4 + +#define GPMC_NR_WAITPINS 4 /* XXX: Only NAND irq has been considered,currently these are the only ones used */ @@ -153,6 +155,7 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); /* Define chip-selects as reserved by default until probe completes */ static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1); +static unsigned int gpmc_nr_waitpins; static struct device *gpmc_dev; static int gpmc_irq; static resource_size_t phys_base, mem_size; @@ -181,7 +184,7 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val) __raw_writel(val, reg_addr); } -u32 gpmc_cs_read_reg(int cs, int idx) +static u32 gpmc_cs_read_reg(int cs, int idx) { void __iomem *reg_addr; @@ -190,7 +193,7 @@ u32 gpmc_cs_read_reg(int cs, int idx) } /* TODO: Add support for gpmc_fck to clock framework and use it */ -unsigned long gpmc_get_fclk_period(void) +static unsigned long gpmc_get_fclk_period(void) { unsigned long rate = clk_get_rate(gpmc_l3_clk); @@ -205,7 +208,7 @@ unsigned long gpmc_get_fclk_period(void) return rate; } -unsigned int gpmc_ns_to_ticks(unsigned int time_ns) +static unsigned int gpmc_ns_to_ticks(unsigned int time_ns) { unsigned long tick_ps; @@ -215,7 +218,7 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns) return (time_ns * 1000 + tick_ps - 1) / tick_ps; } -unsigned int gpmc_ps_to_ticks(unsigned int time_ps) +static unsigned int gpmc_ps_to_ticks(unsigned int time_ps) { unsigned long tick_ps; @@ -230,13 +233,6 @@ unsigned int gpmc_ticks_to_ns(unsigned int ticks) return ticks * gpmc_get_fclk_period() / 1000; } -unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns) -{ - unsigned long ticks = gpmc_ns_to_ticks(time_ns); - - return ticks * gpmc_get_fclk_period() / 1000; -} - static unsigned int gpmc_ticks_to_ps(unsigned int ticks) { return ticks * gpmc_get_fclk_period(); @@ -405,11 +401,18 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) return 0; } -static void gpmc_cs_enable_mem(int cs, u32 base, u32 size) +static int gpmc_cs_enable_mem(int cs, u32 base, u32 size) { u32 l; u32 mask; + /* + * Ensure that base address is aligned on a + * boundary equal to or greater than size. + */ + if (base & (size - 1)) + return -EINVAL; + mask = (1 << GPMC_SECTION_SHIFT) - size; l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); l &= ~0x3f; @@ -418,6 +421,8 @@ static void gpmc_cs_enable_mem(int cs, u32 base, u32 size) l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8; l |= GPMC_CONFIG7_CSVALID; gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); + + return 0; } static void gpmc_cs_disable_mem(int cs) @@ -448,22 +453,14 @@ static int gpmc_cs_mem_enabled(int cs) return l & GPMC_CONFIG7_CSVALID; } -int gpmc_cs_set_reserved(int cs, int reserved) +static void gpmc_cs_set_reserved(int cs, int reserved) { - if (cs > GPMC_CS_NUM) - return -ENODEV; - gpmc_cs_map &= ~(1 << cs); gpmc_cs_map |= (reserved ? 1 : 0) << cs; - - return 0; } -int gpmc_cs_reserved(int cs) +static bool gpmc_cs_reserved(int cs) { - if (cs > GPMC_CS_NUM) - return -ENODEV; - return gpmc_cs_map & (1 << cs); } @@ -510,6 +507,39 @@ static int gpmc_cs_delete_mem(int cs) return r; } +/** + * gpmc_cs_remap - remaps a chip-select physical base address + * @cs: chip-select to remap + * @base: physical base address to re-map chip-select to + * + * Re-maps a chip-select to a new physical base address specified by + * "base". Returns 0 on success and appropriate negative error code + * on failure. + */ +static int gpmc_cs_remap(int cs, u32 base) +{ + int ret; + u32 old_base, size; + + if (cs > GPMC_CS_NUM) + return -ENODEV; + gpmc_cs_get_memconf(cs, &old_base, &size); + if (base == old_base) + return 0; + gpmc_cs_disable_mem(cs); + ret = gpmc_cs_delete_mem(cs); + if (ret < 0) + return ret; + ret = gpmc_cs_insert_mem(cs, base, size); + if (ret < 0) + return ret; + ret = gpmc_cs_enable_mem(cs, base, size); + if (ret < 0) + return ret; + + return 0; +} + int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) { struct resource *res = &gpmc_cs_mem[cs]; @@ -535,7 +565,12 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) if (r < 0) goto out; - gpmc_cs_enable_mem(cs, res->start, resource_size(res)); + r = gpmc_cs_enable_mem(cs, res->start, resource_size(res)); + if (r < 0) { + release_resource(res); + goto out; + } + *base = res->start; gpmc_cs_set_reserved(cs, 1); out: @@ -561,16 +596,14 @@ void gpmc_cs_free(int cs) EXPORT_SYMBOL(gpmc_cs_free); /** - * gpmc_cs_configure - write request to configure gpmc - * @cs: chip select number + * gpmc_configure - write request to configure gpmc * @cmd: command type * @wval: value to write * @return status of the operation */ -int gpmc_cs_configure(int cs, int cmd, int wval) +int gpmc_configure(int cmd, int wval) { - int err = 0; - u32 regval = 0; + u32 regval; switch (cmd) { case GPMC_ENABLE_IRQ: @@ -590,43 +623,14 @@ int gpmc_cs_configure(int cs, int cmd, int wval) gpmc_write_reg(GPMC_CONFIG, regval); break; - case GPMC_CONFIG_RDY_BSY: - regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - if (wval) - regval |= WR_RD_PIN_MONITORING; - else - regval &= ~WR_RD_PIN_MONITORING; - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); - break; - - case GPMC_CONFIG_DEV_SIZE: - regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - /* clear 2 target bits */ - regval &= ~GPMC_CONFIG1_DEVICESIZE(3); - - /* set the proper value */ - regval |= GPMC_CONFIG1_DEVICESIZE(wval); - - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); - break; - - case GPMC_CONFIG_DEV_TYPE: - regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - regval |= GPMC_CONFIG1_DEVICETYPE(wval); - if (wval == GPMC_DEVICETYPE_NOR) - regval |= GPMC_CONFIG1_MUXADDDATA; - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); - break; - default: - printk(KERN_ERR "gpmc_configure_cs: Not supported\n"); - err = -EINVAL; + pr_err("%s: command not supported\n", __func__); + return -EINVAL; } - return err; + return 0; } -EXPORT_SYMBOL(gpmc_cs_configure); +EXPORT_SYMBOL(gpmc_configure); void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) { @@ -781,16 +785,16 @@ static void gpmc_mem_exit(void) } -static int gpmc_mem_init(void) +static void gpmc_mem_init(void) { - int cs, rc; - unsigned long boot_rom_space = 0; + int cs; - /* never allocate the first page, to facilitate bug detection; - * even if we didn't boot from ROM. + /* + * The first 1MB of GPMC address space is typically mapped to + * the internal ROM. Never allocate the first page, to + * facilitate bug detection; even if we didn't boot from ROM. */ - boot_rom_space = BOOT_ROM_SPACE; - gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space; + gpmc_mem_root.start = SZ_1M; gpmc_mem_root.end = GPMC_MEM_END; /* Reserve all regions that has been set up by bootloader */ @@ -800,16 +804,12 @@ static int gpmc_mem_init(void) if (!gpmc_cs_mem_enabled(cs)) continue; gpmc_cs_get_memconf(cs, &base, &size); - rc = gpmc_cs_insert_mem(cs, base, size); - if (rc < 0) { - while (--cs >= 0) - if (gpmc_cs_mem_enabled(cs)) - gpmc_cs_delete_mem(cs); - return rc; + if (gpmc_cs_insert_mem(cs, base, size)) { + pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n", + __func__, cs, base, base + size); + gpmc_cs_disable_mem(cs); } } - - return 0; } static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk) @@ -825,9 +825,9 @@ static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk) /* XXX: can the cycles be avoided ? */ static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_rd_off */ @@ -880,9 +880,9 @@ static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_wr_off */ @@ -942,9 +942,9 @@ static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_rd_off */ @@ -982,9 +982,9 @@ static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_wr_off */ @@ -1054,7 +1054,8 @@ static int gpmc_calc_sync_common_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool sync) { u32 temp; @@ -1068,7 +1069,7 @@ static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t, gpmc_t->cs_on + dev_t->t_ce_avd); gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp); - if (dev_t->sync_write || dev_t->sync_read) + if (sync) gpmc_calc_sync_common_timings(gpmc_t, dev_t); return 0; @@ -1103,21 +1104,29 @@ static void gpmc_convert_ps_to_ns(struct gpmc_timings *t) } int gpmc_calc_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_settings *gpmc_s, + struct gpmc_device_timings *dev_t) { + bool mux = false, sync = false; + + if (gpmc_s) { + mux = gpmc_s->mux_add_data ? true : false; + sync = (gpmc_s->sync_read || gpmc_s->sync_write); + } + memset(gpmc_t, 0, sizeof(*gpmc_t)); - gpmc_calc_common_timings(gpmc_t, dev_t); + gpmc_calc_common_timings(gpmc_t, dev_t, sync); - if (dev_t->sync_read) - gpmc_calc_sync_read_timings(gpmc_t, dev_t); + if (gpmc_s && gpmc_s->sync_read) + gpmc_calc_sync_read_timings(gpmc_t, dev_t, mux); else - gpmc_calc_async_read_timings(gpmc_t, dev_t); + gpmc_calc_async_read_timings(gpmc_t, dev_t, mux); - if (dev_t->sync_write) - gpmc_calc_sync_write_timings(gpmc_t, dev_t); + if (gpmc_s && gpmc_s->sync_write) + gpmc_calc_sync_write_timings(gpmc_t, dev_t, mux); else - gpmc_calc_async_write_timings(gpmc_t, dev_t); + gpmc_calc_async_write_timings(gpmc_t, dev_t, mux); /* TODO: remove, see function definition */ gpmc_convert_ps_to_ns(gpmc_t); @@ -1125,6 +1134,90 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t, return 0; } +/** + * gpmc_cs_program_settings - programs non-timing related settings + * @cs: GPMC chip-select to program + * @p: pointer to GPMC settings structure + * + * Programs non-timing related settings for a GPMC chip-select, such as + * bus-width, burst configuration, etc. Function should be called once + * for each chip-select that is being used and must be called before + * calling gpmc_cs_set_timings() as timing parameters in the CONFIG1 + * register will be initialised to zero by this function. Returns 0 on + * success and appropriate negative error code on failure. + */ +int gpmc_cs_program_settings(int cs, struct gpmc_settings *p) +{ + u32 config1; + + if ((!p->device_width) || (p->device_width > GPMC_DEVWIDTH_16BIT)) { + pr_err("%s: invalid width %d!", __func__, p->device_width); + return -EINVAL; + } + + /* Address-data multiplexing not supported for NAND devices */ + if (p->device_nand && p->mux_add_data) { + pr_err("%s: invalid configuration!\n", __func__); + return -EINVAL; + } + + if ((p->mux_add_data > GPMC_MUX_AD) || + ((p->mux_add_data == GPMC_MUX_AAD) && + !(gpmc_capability & GPMC_HAS_MUX_AAD))) { + pr_err("%s: invalid multiplex configuration!\n", __func__); + return -EINVAL; + } + + /* Page/burst mode supports lengths of 4, 8 and 16 bytes */ + if (p->burst_read || p->burst_write) { + switch (p->burst_len) { + case GPMC_BURST_4: + case GPMC_BURST_8: + case GPMC_BURST_16: + break; + default: + pr_err("%s: invalid page/burst-length (%d)\n", + __func__, p->burst_len); + return -EINVAL; + } + } + + if ((p->wait_on_read || p->wait_on_write) && + (p->wait_pin > gpmc_nr_waitpins)) { + pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin); + return -EINVAL; + } + + config1 = GPMC_CONFIG1_DEVICESIZE((p->device_width - 1)); + + if (p->sync_read) + config1 |= GPMC_CONFIG1_READTYPE_SYNC; + if (p->sync_write) + config1 |= GPMC_CONFIG1_WRITETYPE_SYNC; + if (p->wait_on_read) + config1 |= GPMC_CONFIG1_WAIT_READ_MON; + if (p->wait_on_write) + config1 |= GPMC_CONFIG1_WAIT_WRITE_MON; + if (p->wait_on_read || p->wait_on_write) + config1 |= GPMC_CONFIG1_WAIT_PIN_SEL(p->wait_pin); + if (p->device_nand) + config1 |= GPMC_CONFIG1_DEVICETYPE(GPMC_DEVICETYPE_NAND); + if (p->mux_add_data) + config1 |= GPMC_CONFIG1_MUXTYPE(p->mux_add_data); + if (p->burst_read) + config1 |= GPMC_CONFIG1_READMULTIPLE_SUPP; + if (p->burst_write) + config1 |= GPMC_CONFIG1_WRITEMULTIPLE_SUPP; + if (p->burst_read || p->burst_write) { + config1 |= GPMC_CONFIG1_PAGE_LEN(p->burst_len >> 3); + config1 |= p->burst_wrap ? GPMC_CONFIG1_WRAPBURST_SUPP : 0; + } + + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1); + + return 0; +} + #ifdef CONFIG_OF static struct of_device_id gpmc_dt_ids[] = { { .compatible = "ti,omap2420-gpmc" }, @@ -1136,70 +1229,110 @@ static struct of_device_id gpmc_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, gpmc_dt_ids); +/** + * gpmc_read_settings_dt - read gpmc settings from device-tree + * @np: pointer to device-tree node for a gpmc child device + * @p: pointer to gpmc settings structure + * + * Reads the GPMC settings for a GPMC child device from device-tree and + * stores them in the GPMC settings structure passed. The GPMC settings + * structure is initialised to zero by this function and so any + * previously stored settings will be cleared. + */ +void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p) +{ + memset(p, 0, sizeof(struct gpmc_settings)); + + p->sync_read = of_property_read_bool(np, "gpmc,sync-read"); + p->sync_write = of_property_read_bool(np, "gpmc,sync-write"); + p->device_nand = of_property_read_bool(np, "gpmc,device-nand"); + of_property_read_u32(np, "gpmc,device-width", &p->device_width); + of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data); + + if (!of_property_read_u32(np, "gpmc,burst-length", &p->burst_len)) { + p->burst_wrap = of_property_read_bool(np, "gpmc,burst-wrap"); + p->burst_read = of_property_read_bool(np, "gpmc,burst-read"); + p->burst_write = of_property_read_bool(np, "gpmc,burst-write"); + if (!p->burst_read && !p->burst_write) + pr_warn("%s: page/burst-length set but not used!\n", + __func__); + } + + if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) { + p->wait_on_read = of_property_read_bool(np, + "gpmc,wait-on-read"); + p->wait_on_write = of_property_read_bool(np, + "gpmc,wait-on-write"); + if (!p->wait_on_read && !p->wait_on_write) + pr_warn("%s: read/write wait monitoring not enabled!\n", + __func__); + } +} + static void __maybe_unused gpmc_read_timings_dt(struct device_node *np, struct gpmc_timings *gpmc_t) { - u32 val; + struct gpmc_bool_timings *p; + + if (!np || !gpmc_t) + return; memset(gpmc_t, 0, sizeof(*gpmc_t)); /* minimum clock period for syncronous mode */ - if (!of_property_read_u32(np, "gpmc,sync-clk", &val)) - gpmc_t->sync_clk = val; + of_property_read_u32(np, "gpmc,sync-clk-ps", &gpmc_t->sync_clk); /* chip select timtings */ - if (!of_property_read_u32(np, "gpmc,cs-on", &val)) - gpmc_t->cs_on = val; - - if (!of_property_read_u32(np, "gpmc,cs-rd-off", &val)) - gpmc_t->cs_rd_off = val; - - if (!of_property_read_u32(np, "gpmc,cs-wr-off", &val)) - gpmc_t->cs_wr_off = val; + of_property_read_u32(np, "gpmc,cs-on-ns", &gpmc_t->cs_on); + of_property_read_u32(np, "gpmc,cs-rd-off-ns", &gpmc_t->cs_rd_off); + of_property_read_u32(np, "gpmc,cs-wr-off-ns", &gpmc_t->cs_wr_off); /* ADV signal timings */ - if (!of_property_read_u32(np, "gpmc,adv-on", &val)) - gpmc_t->adv_on = val; - - if (!of_property_read_u32(np, "gpmc,adv-rd-off", &val)) - gpmc_t->adv_rd_off = val; - - if (!of_property_read_u32(np, "gpmc,adv-wr-off", &val)) - gpmc_t->adv_wr_off = val; + of_property_read_u32(np, "gpmc,adv-on-ns", &gpmc_t->adv_on); + of_property_read_u32(np, "gpmc,adv-rd-off-ns", &gpmc_t->adv_rd_off); + of_property_read_u32(np, "gpmc,adv-wr-off-ns", &gpmc_t->adv_wr_off); /* WE signal timings */ - if (!of_property_read_u32(np, "gpmc,we-on", &val)) - gpmc_t->we_on = val; - - if (!of_property_read_u32(np, "gpmc,we-off", &val)) - gpmc_t->we_off = val; + of_property_read_u32(np, "gpmc,we-on-ns", &gpmc_t->we_on); + of_property_read_u32(np, "gpmc,we-off-ns", &gpmc_t->we_off); /* OE signal timings */ - if (!of_property_read_u32(np, "gpmc,oe-on", &val)) - gpmc_t->oe_on = val; - - if (!of_property_read_u32(np, "gpmc,oe-off", &val)) - gpmc_t->oe_off = val; + of_property_read_u32(np, "gpmc,oe-on-ns", &gpmc_t->oe_on); + of_property_read_u32(np, "gpmc,oe-off-ns", &gpmc_t->oe_off); /* access and cycle timings */ - if (!of_property_read_u32(np, "gpmc,page-burst-access", &val)) - gpmc_t->page_burst_access = val; - - if (!of_property_read_u32(np, "gpmc,access", &val)) - gpmc_t->access = val; - - if (!of_property_read_u32(np, "gpmc,rd-cycle", &val)) - gpmc_t->rd_cycle = val; - - if (!of_property_read_u32(np, "gpmc,wr-cycle", &val)) - gpmc_t->wr_cycle = val; - - /* only for OMAP3430 */ - if (!of_property_read_u32(np, "gpmc,wr-access", &val)) - gpmc_t->wr_access = val; - - if (!of_property_read_u32(np, "gpmc,wr-data-mux-bus", &val)) - gpmc_t->wr_data_mux_bus = val; + of_property_read_u32(np, "gpmc,page-burst-access-ns", + &gpmc_t->page_burst_access); + of_property_read_u32(np, "gpmc,access-ns", &gpmc_t->access); + of_property_read_u32(np, "gpmc,rd-cycle-ns", &gpmc_t->rd_cycle); + of_property_read_u32(np, "gpmc,wr-cycle-ns", &gpmc_t->wr_cycle); + of_property_read_u32(np, "gpmc,bus-turnaround-ns", + &gpmc_t->bus_turnaround); + of_property_read_u32(np, "gpmc,cycle2cycle-delay-ns", + &gpmc_t->cycle2cycle_delay); + of_property_read_u32(np, "gpmc,wait-monitoring-ns", + &gpmc_t->wait_monitoring); + of_property_read_u32(np, "gpmc,clk-activation-ns", + &gpmc_t->clk_activation); + + /* only applicable to OMAP3+ */ + of_property_read_u32(np, "gpmc,wr-access-ns", &gpmc_t->wr_access); + of_property_read_u32(np, "gpmc,wr-data-mux-bus-ns", + &gpmc_t->wr_data_mux_bus); + + /* bool timing parameters */ + p = &gpmc_t->bool_timings; + + p->cycle2cyclediffcsen = + of_property_read_bool(np, "gpmc,cycle2cycle-diffcsen"); + p->cycle2cyclesamecsen = + of_property_read_bool(np, "gpmc,cycle2cycle-samecsen"); + p->we_extra_delay = of_property_read_bool(np, "gpmc,we-extra-delay"); + p->oe_extra_delay = of_property_read_bool(np, "gpmc,oe-extra-delay"); + p->adv_extra_delay = of_property_read_bool(np, "gpmc,adv-extra-delay"); + p->cs_extra_delay = of_property_read_bool(np, "gpmc,cs-extra-delay"); + p->time_para_granularity = + of_property_read_bool(np, "gpmc,time-para-granularity"); } #ifdef CONFIG_MTD_NAND @@ -1295,6 +1428,81 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev, } #endif +/** + * gpmc_probe_generic_child - configures the gpmc for a child device + * @pdev: pointer to gpmc platform device + * @child: pointer to device-tree node for child device + * + * Allocates and configures a GPMC chip-select for a child device. + * Returns 0 on success and appropriate negative error code on failure. + */ +static int gpmc_probe_generic_child(struct platform_device *pdev, + struct device_node *child) +{ + struct gpmc_settings gpmc_s; + struct gpmc_timings gpmc_t; + struct resource res; + unsigned long base; + int ret, cs; + + if (of_property_read_u32(child, "reg", &cs) < 0) { + dev_err(&pdev->dev, "%s has no 'reg' property\n", + child->full_name); + return -ENODEV; + } + + if (of_address_to_resource(child, 0, &res) < 0) { + dev_err(&pdev->dev, "%s has malformed 'reg' property\n", + child->full_name); + return -ENODEV; + } + + ret = gpmc_cs_request(cs, resource_size(&res), &base); + if (ret < 0) { + dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs); + return ret; + } + + /* + * FIXME: gpmc_cs_request() will map the CS to an arbitary + * location in the gpmc address space. When booting with + * device-tree we want the NOR flash to be mapped to the + * location specified in the device-tree blob. So remap the + * CS to this location. Once DT migration is complete should + * just make gpmc_cs_request() map a specific address. + */ + ret = gpmc_cs_remap(cs, res.start); + if (ret < 0) { + dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n", + cs, res.start); + goto err; + } + + gpmc_read_settings_dt(child, &gpmc_s); + + ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width); + if (ret < 0) + goto err; + + ret = gpmc_cs_program_settings(cs, &gpmc_s); + if (ret < 0) + goto err; + + gpmc_read_timings_dt(child, &gpmc_t); + gpmc_cs_set_timings(cs, &gpmc_t); + + if (of_platform_device_create(child, NULL, &pdev->dev)) + return 0; + + dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name); + ret = -ENODEV; + +err: + gpmc_cs_free(cs); + + return ret; +} + static int gpmc_probe_dt(struct platform_device *pdev) { int ret; @@ -1305,6 +1513,13 @@ static int gpmc_probe_dt(struct platform_device *pdev) if (!of_id) return 0; + ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins", + &gpmc_nr_waitpins); + if (ret < 0) { + pr_err("%s: number of wait pins not found!\n", __func__); + return ret; + } + for_each_node_by_name(child, "nand") { ret = gpmc_probe_nand_child(pdev, child); if (ret < 0) { @@ -1320,6 +1535,23 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } } + + for_each_node_by_name(child, "nor") { + ret = gpmc_probe_generic_child(pdev, child); + if (ret < 0) { + of_node_put(child); + return ret; + } + } + + for_each_node_by_name(child, "ethernet") { + ret = gpmc_probe_generic_child(pdev, child); + if (ret < 0) { + of_node_put(child); + return ret; + } + } + return 0; } #else @@ -1364,18 +1596,27 @@ static int gpmc_probe(struct platform_device *pdev) gpmc_dev = &pdev->dev; l = gpmc_read_reg(GPMC_REVISION); + + /* + * FIXME: Once device-tree migration is complete the below flags + * should be populated based upon the device-tree compatible + * string. For now just use the IP revision. OMAP3+ devices have + * the wr_access and wr_data_mux_bus register fields. OMAP4+ + * devices support the addr-addr-data multiplex protocol. + * + * GPMC IP revisions: + * - OMAP24xx = 2.0 + * - OMAP3xxx = 5.0 + * - OMAP44xx/54xx/AM335x = 6.0 + */ if (GPMC_REVISION_MAJOR(l) > 0x4) gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS; + if (GPMC_REVISION_MAJOR(l) > 0x5) + gpmc_capability |= GPMC_HAS_MUX_AAD; dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l), GPMC_REVISION_MINOR(l)); - rc = gpmc_mem_init(); - if (rc < 0) { - clk_disable_unprepare(gpmc_l3_clk); - clk_put(gpmc_l3_clk); - dev_err(gpmc_dev, "failed to reserve memory\n"); - return rc; - } + gpmc_mem_init(); if (gpmc_setup_irq() < 0) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); @@ -1383,6 +1624,9 @@ static int gpmc_probe(struct platform_device *pdev) /* Now the GPMC is initialised, unreserve the chip-selects */ gpmc_cs_map = 0; + if (!pdev->dev.of_node) + gpmc_nr_waitpins = GPMC_NR_WAITPINS; + rc = gpmc_probe_dt(pdev); if (rc < 0) { clk_disable_unprepare(gpmc_l3_clk); diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h index fe0a844d5007..707f6d58edd5 100644 --- a/arch/arm/mach-omap2/gpmc.h +++ b/arch/arm/mach-omap2/gpmc.h @@ -58,7 +58,7 @@ #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) #define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) #define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_MUXADDDATA (1 << 9) +#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8) #define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) #define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) #define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) @@ -73,6 +73,13 @@ #define GPMC_IRQ_FIFOEVENTENABLE 0x01 #define GPMC_IRQ_COUNT_EVENT 0x02 +#define GPMC_BURST_4 4 /* 4 word burst */ +#define GPMC_BURST_8 8 /* 8 word burst */ +#define GPMC_BURST_16 16 /* 16 word burst */ +#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */ +#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */ +#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */ +#define GPMC_MUX_AD 2 /* Addr-Data multiplex */ /* bool type time settings */ struct gpmc_bool_timings { @@ -178,10 +185,6 @@ struct gpmc_device_timings { u8 cyc_wpl; /* write deassertion time in cycles */ u32 cyc_iaa; /* initial access time in cycles */ - bool mux; /* address & data muxed */ - bool sync_write;/* synchronous write */ - bool sync_read; /* synchronous read */ - /* extra delays */ bool ce_xdelay; bool avd_xdelay; @@ -189,28 +192,40 @@ struct gpmc_device_timings { bool we_xdelay; }; +struct gpmc_settings { + bool burst_wrap; /* enables wrap bursting */ + bool burst_read; /* enables read page/burst mode */ + bool burst_write; /* enables write page/burst mode */ + bool device_nand; /* device is NAND */ + bool sync_read; /* enables synchronous reads */ + bool sync_write; /* enables synchronous writes */ + bool wait_on_read; /* monitor wait on reads */ + bool wait_on_write; /* monitor wait on writes */ + u32 burst_len; /* page/burst length */ + u32 device_width; /* device bus width (8 or 16 bit) */ + u32 mux_add_data; /* multiplex address & data */ + u32 wait_pin; /* wait-pin to be used */ +}; + extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t); + struct gpmc_settings *gpmc_s, + struct gpmc_device_timings *dev_t); extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); extern int gpmc_get_client_irq(unsigned irq_config); -extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); -extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps); extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); -extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); -extern unsigned long gpmc_get_fclk_period(void); extern void gpmc_cs_write_reg(int cs, int idx, u32 val); -extern u32 gpmc_cs_read_reg(int cs, int idx); extern int gpmc_calc_divider(unsigned int sync_clk); extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); +extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p); extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); -extern int gpmc_cs_set_reserved(int cs, int reserved); -extern int gpmc_cs_reserved(int cs); extern void omap3_gpmc_save_context(void); extern void omap3_gpmc_restore_context(void); -extern int gpmc_cs_configure(int cs, int cmd, int wval); +extern int gpmc_configure(int cmd, int wval); +extern void gpmc_read_settings_dt(struct device_node *np, + struct gpmc_settings *p); #endif diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 63e6384fa72e..f12aa6c15da4 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -57,16 +57,6 @@ #include "common.h" #include "powerdomain.h" -/* Parent clocks, eventually these will come from the clock framework */ - -#define OMAP2_MPU_SOURCE "sys_ck" -#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE -#define OMAP4_MPU_SOURCE "sys_clkin_ck" -#define OMAP5_MPU_SOURCE "sys_clkin" -#define OMAP2_32K_SOURCE "func_32k_ck" -#define OMAP3_32K_SOURCE "omap_32k_fck" -#define OMAP4_32K_SOURCE "sys_32k_ck" - #define REALTIME_COUNTER_BASE 0x48243200 #define INCREMENTER_NUMERATOR_OFFSET 0x10 #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14 @@ -130,7 +120,6 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, } static struct clock_event_device clockevent_gpt = { - .name = "gp_timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .rating = 300, .set_next_event = omap2_gp_timer_set_next_event, @@ -171,6 +160,12 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, if (property && !of_get_property(np, property, NULL)) continue; + if (!property && (of_get_property(np, "ti,timer-alwon", NULL) || + of_get_property(np, "ti,timer-dsp", NULL) || + of_get_property(np, "ti,timer-pwm", NULL) || + of_get_property(np, "ti,timer-secure", NULL))) + continue; + of_add_property(np, &device_disabled); return np; } @@ -215,16 +210,17 @@ static u32 __init omap_dm_timer_get_errata(void) } static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, - int gptimer_id, - const char *fck_source, - const char *property, - int posted) + const char *fck_source, + const char *property, + const char **timer_name, + int posted) { char name[10]; /* 10 = sizeof("gptXX_Xck0") */ const char *oh_name; struct device_node *np; struct omap_hwmod *oh; struct resource irq, mem; + struct clk *src; int r = 0; if (of_have_populated_dt()) { @@ -244,10 +240,10 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, of_node_put(np); } else { - if (omap_dm_timer_reserve_systimer(gptimer_id)) + if (omap_dm_timer_reserve_systimer(timer->id)) return -ENODEV; - sprintf(name, "timer%d", gptimer_id); + sprintf(name, "timer%d", timer->id); oh_name = name; } @@ -255,6 +251,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (!oh) return -ENODEV; + *timer_name = oh->name; + if (!of_have_populated_dt()) { r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq); @@ -277,24 +275,24 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, /* After the dmtimer is using hwmod these clocks won't be needed */ timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh)); if (IS_ERR(timer->fclk)) - return -ENODEV; + return PTR_ERR(timer->fclk); - /* FIXME: Need to remove hard-coded test on timer ID */ - if (gptimer_id != 12) { - struct clk *src; - - src = clk_get(NULL, fck_source); - if (IS_ERR(src)) { - r = -EINVAL; - } else { - r = clk_set_parent(timer->fclk, src); - if (r < 0) - pr_warn("%s: %s cannot set source\n", - __func__, oh->name); + src = clk_get(NULL, fck_source); + if (IS_ERR(src)) + return PTR_ERR(src); + + if (clk_get_parent(timer->fclk) != src) { + r = clk_set_parent(timer->fclk, src); + if (r < 0) { + pr_warn("%s: %s cannot set source\n", __func__, + oh->name); clk_put(src); + return r; } } + clk_put(src); + omap_hwmod_setup_one(oh_name); omap_hwmod_enable(oh); __omap_dm_timer_init_regs(timer); @@ -318,6 +316,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, { int res; + clkev.id = gptimer_id; clkev.errata = omap_dm_timer_get_errata(); /* @@ -327,8 +326,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, */ __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767); - res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property, - OMAP_TIMER_POSTED); + res = omap_dm_timer_init_one(&clkev, fck_source, property, + &clockevent_gpt.name, OMAP_TIMER_POSTED); BUG_ON(res); omap2_gp_timer_irq.dev_id = &clkev; @@ -342,8 +341,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, 3, /* Timer internal resynch latency */ 0xffffffff); - pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", - gptimer_id, clkev.rate); + pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name, + clkev.rate); } /* Clocksource code */ @@ -360,7 +359,6 @@ static cycle_t clocksource_read_cycles(struct clocksource *cs) } static struct clocksource clocksource_gpt = { - .name = "gp_timer", .rating = 300, .read = clocksource_read_cycles, .mask = CLOCKSOURCE_MASK(32), @@ -443,13 +441,16 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) } static void __init omap2_gptimer_clocksource_init(int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property) { int res; + clksrc.id = gptimer_id; clksrc.errata = omap_dm_timer_get_errata(); - res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL, + res = omap_dm_timer_init_one(&clksrc, fck_source, property, + &clocksource_gpt.name, OMAP_TIMER_NONPOSTED); BUG_ON(res); @@ -462,8 +463,8 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, pr_err("Could not register clocksource %s\n", clocksource_gpt.name); else - pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", - gptimer_id, clksrc.rate); + pr_info("OMAP clocksource: %s at %lu Hz\n", + clocksource_gpt.name, clksrc.rate); } #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER @@ -488,7 +489,7 @@ static void __init realtime_counter_init(void) pr_err("%s: ioremap failed\n", __func__); return; } - sys_clk = clk_get(NULL, OMAP5_MPU_SOURCE); + sys_clk = clk_get(NULL, "sys_clkin"); if (IS_ERR(sys_clk)) { pr_err("%s: failed to get system clock handle\n", __func__); iounmap(base); @@ -545,53 +546,52 @@ static inline void __init realtime_counter_init(void) #endif #define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src) \ + clksrc_nr, clksrc_src, clksrc_prop) \ void __init omap##name##_gptimer_timer_init(void) \ { \ - if (omap_clk_init) \ - omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ + clksrc_prop); \ } #define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src) \ + clksrc_nr, clksrc_src, clksrc_prop) \ void __init omap##name##_sync32k_timer_init(void) \ { \ - if (omap_clk_init) \ - omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ /* Enable the use of clocksource="gp_timer" kernel parameter */ \ if (use_gptimer_clksrc) \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);\ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ + clksrc_prop); \ else \ omap2_sync32k_clocksource_init(); \ } #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon", - 2, OMAP2_MPU_SOURCE); +OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon", + 2, "timer_sys_ck", NULL); #endif /* CONFIG_ARCH_OMAP2 */ #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon", - 2, OMAP3_MPU_SOURCE); -OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure", - 2, OMAP3_MPU_SOURCE); -OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon", - 2, OMAP3_MPU_SOURCE); +OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon", + 2, "timer_sys_ck", NULL); +OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure", + 2, "timer_sys_ck", NULL); #endif /* CONFIG_ARCH_OMAP3 */ -#ifdef CONFIG_SOC_AM33XX -OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon", - 2, OMAP4_MPU_SOURCE); -#endif /* CONFIG_SOC_AM33XX */ +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) +OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL, + 1, "timer_sys_ck", "ti,timer-alwon"); +#endif + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon", + 2, "sys_clkin_ck", NULL); +#endif #ifdef CONFIG_ARCH_OMAP4 -OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", - 2, OMAP4_MPU_SOURCE); #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29); void __init omap4_local_timer_init(void) @@ -620,13 +620,11 @@ void __init omap4_local_timer_init(void) #endif /* CONFIG_ARCH_OMAP4 */ #ifdef CONFIG_SOC_OMAP5 -OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", - 2, OMAP5_MPU_SOURCE); void __init omap5_realtime_timer_init(void) { int err; - omap5_sync32k_timer_init(); + omap4_sync32k_timer_init(); realtime_counter_init(); err = arch_timer_of_register(); diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 5706bdccf45e..aa27d7f5cbb7 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -22,8 +22,12 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/dma-mapping.h> - -#include <asm/io.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/string.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/usb/phy.h> #include "soc.h" #include "omap_device.h" @@ -526,3 +530,155 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata) } #endif + +/* Template for PHY regulators */ +static struct fixed_voltage_config hsusb_reg_config = { + /* .supply_name filled later */ + .microvolts = 3300000, + .gpio = -1, /* updated later */ + .startup_delay = 70000, /* 70msec */ + .enable_high = 1, /* updated later */ + .enabled_at_boot = 0, /* keep in RESET */ + /* .init_data filled later */ +}; + +static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */ +static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */ + +/** + * usbhs_add_regulator - Add a gpio based fixed voltage regulator device + * @name: name for the regulator + * @dev_id: device id of the device this regulator supplies power to + * @dev_supply: supply name that the device expects + * @gpio: GPIO number + * @polarity: 1 - Active high, 0 - Active low + */ +static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply, + int gpio, int polarity) +{ + struct regulator_consumer_supply *supplies; + struct regulator_init_data *reg_data; + struct fixed_voltage_config *config; + struct platform_device *pdev; + int ret; + + supplies = kzalloc(sizeof(*supplies), GFP_KERNEL); + if (!supplies) + return -ENOMEM; + + supplies->supply = dev_supply; + supplies->dev_name = dev_id; + + reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL); + if (!reg_data) + return -ENOMEM; + + reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; + reg_data->consumer_supplies = supplies; + reg_data->num_consumer_supplies = 1; + + config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config), + GFP_KERNEL); + if (!config) + return -ENOMEM; + + config->supply_name = name; + config->gpio = gpio; + config->enable_high = polarity; + config->init_data = reg_data; + + /* create a regulator device */ + pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + + pdev->id = PLATFORM_DEVID_AUTO; + pdev->name = reg_name; + pdev->dev.platform_data = config; + + ret = platform_device_register(pdev); + if (ret) + pr_err("%s: Failed registering regulator %s for %s\n", + __func__, name, dev_id); + + return ret; +} + +int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) +{ + char *rail_name; + int i, len; + struct platform_device *pdev; + char *phy_id; + + /* the phy_id will be something like "nop_usb_xceiv.1" */ + len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */ + + for (i = 0; i < num_phys; i++) { + + if (!phy->port) { + pr_err("%s: Invalid port 0. Must start from 1\n", + __func__); + continue; + } + + /* do we need a NOP PHY device ? */ + if (!gpio_is_valid(phy->reset_gpio) && + !gpio_is_valid(phy->vcc_gpio)) + continue; + + /* create a NOP PHY device */ + pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + + pdev->id = phy->port; + pdev->name = nop_name; + pdev->dev.platform_data = phy->platform_data; + + phy_id = kmalloc(len, GFP_KERNEL); + if (!phy_id) + return -ENOMEM; + + scnprintf(phy_id, len, "nop_usb_xceiv.%d\n", + pdev->id); + + if (platform_device_register(pdev)) { + pr_err("%s: Failed to register device %s\n", + __func__, phy_id); + continue; + } + + usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id); + + /* Do we need RESET regulator ? */ + if (gpio_is_valid(phy->reset_gpio)) { + + rail_name = kmalloc(13, GFP_KERNEL); + if (!rail_name) + return -ENOMEM; + + scnprintf(rail_name, 13, "hsusb%d_reset", phy->port); + + usbhs_add_regulator(rail_name, phy_id, "reset", + phy->reset_gpio, 1); + } + + /* Do we need VCC regulator ? */ + if (gpio_is_valid(phy->vcc_gpio)) { + + rail_name = kmalloc(13, GFP_KERNEL); + if (!rail_name) + return -ENOMEM; + + scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port); + + usbhs_add_regulator(rail_name, phy_id, "vcc", + phy->vcc_gpio, phy->vcc_polarity); + } + + phy++; + } + + return 0; +} diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index c5a3c6f9504e..e832bc7b8e2d 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <linux/err.h> #include <linux/string.h> #include <linux/types.h> #include <linux/errno.h> @@ -26,6 +27,24 @@ static u8 async_cs, sync_cs; static unsigned refclk_psec; +static struct gpmc_settings tusb_async = { + .wait_on_read = true, + .wait_on_write = true, + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, +}; + +static struct gpmc_settings tusb_sync = { + .burst_read = true, + .burst_write = true, + .sync_read = true, + .sync_write = true, + .wait_on_read = true, + .wait_on_write = true, + .burst_len = GPMC_BURST_16, + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, +}; /* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */ @@ -37,8 +56,6 @@ static int tusb_set_async_mode(unsigned sysclk_ps) memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; - dev_t.t_ceasu = 8 * 1000; dev_t.t_avdasu = t_acsnh_advnh - 7000; dev_t.t_ce_avd = 1000; @@ -52,7 +69,7 @@ static int tusb_set_async_mode(unsigned sysclk_ps) dev_t.t_wpl = 300; dev_t.cyc_aavdh_we = 1; - gpmc_calc_timings(&t, &dev_t); + gpmc_calc_timings(&t, &tusb_async, &dev_t); return gpmc_cs_set_timings(async_cs, &t); } @@ -65,10 +82,6 @@ static int tusb_set_sync_mode(unsigned sysclk_ps) memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; - dev_t.sync_read = true; - dev_t.sync_write = true; - dev_t.clk = 11100; dev_t.t_bacc = 1000; dev_t.t_ces = 1000; @@ -84,7 +97,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps) dev_t.cyc_wpl = 6; dev_t.t_ce_rdyz = 7000; - gpmc_calc_timings(&t, &dev_t); + gpmc_calc_timings(&t, &tusb_sync, &dev_t); return gpmc_cs_set_timings(sync_cs, &t); } @@ -165,18 +178,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, return status; } tusb_resources[0].end = tusb_resources[0].start + 0x9ff; + tusb_async.wait_pin = waitpin; async_cs = async; - gpmc_cs_write_reg(async, GPMC_CS_CONFIG1, - GPMC_CONFIG1_PAGE_LEN(2) - | GPMC_CONFIG1_WAIT_READ_MON - | GPMC_CONFIG1_WAIT_WRITE_MON - | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) - | GPMC_CONFIG1_READTYPE_ASYNC - | GPMC_CONFIG1_WRITETYPE_ASYNC - | GPMC_CONFIG1_DEVICESIZE_16 - | GPMC_CONFIG1_DEVICETYPE_NOR - | GPMC_CONFIG1_MUXADDDATA); + status = gpmc_cs_program_settings(async_cs, &tusb_async); + if (status < 0) + return status; /* SYNC region, primarily for DMA */ status = gpmc_cs_request(sync, SZ_16M, (unsigned long *) @@ -186,21 +193,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, return status; } tusb_resources[1].end = tusb_resources[1].start + 0x9ff; + tusb_sync.wait_pin = waitpin; sync_cs = sync; - gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1, - GPMC_CONFIG1_READMULTIPLE_SUPP - | GPMC_CONFIG1_READTYPE_SYNC - | GPMC_CONFIG1_WRITEMULTIPLE_SUPP - | GPMC_CONFIG1_WRITETYPE_SYNC - | GPMC_CONFIG1_PAGE_LEN(2) - | GPMC_CONFIG1_WAIT_READ_MON - | GPMC_CONFIG1_WAIT_WRITE_MON - | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) - | GPMC_CONFIG1_DEVICESIZE_16 - | GPMC_CONFIG1_DEVICETYPE_NOR - | GPMC_CONFIG1_MUXADDDATA - /* fclk divider gets set later */ - ); + + status = gpmc_cs_program_settings(sync_cs, &tusb_sync); + if (status < 0) + return status; /* IRQ */ status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq"); diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h index 3319f5cf47a3..e7261ebcf7b0 100644 --- a/arch/arm/mach-omap2/usb.h +++ b/arch/arm/mach-omap2/usb.h @@ -53,8 +53,17 @@ #define USBPHY_OTGSESSEND_EN (1 << 20) #define USBPHY_DATA_POLARITY (1 << 23) +struct usbhs_phy_data { + int port; /* 1 indexed port number */ + int reset_gpio; + int vcc_gpio; + bool vcc_polarity; /* 1 active high, 0 active low */ + void *platform_data; +}; + extern void usb_musb_init(struct omap_musb_board_data *board_data); extern void usbhs_init(struct usbhs_omap_platform_data *pdata); +extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys); extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 8d5fa6ece014..f2f7088bfd22 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -30,6 +30,7 @@ config CPU_S3C2410 select S3C2410_CLOCK select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX select S3C2410_PM if PM + select SAMSUNG_HRT help Support for S3C2410 and S3C2410A family from the S3C24XX line of Samsung Mobile CPUs. @@ -40,6 +41,7 @@ config CPU_S3C2412 select CPU_LLSERIAL_S3C2440 select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM + select SAMSUNG_HRT help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line @@ -51,6 +53,7 @@ config CPU_S3C2416 select S3C2443_COMMON select S3C2443_DMA if S3C24XX_DMA select SAMSUNG_CLKSRC + select SAMSUNG_HRT help Support for the S3C2416 SoC from the S3C24XX line @@ -61,6 +64,7 @@ config CPU_S3C2440 select S3C2410_CLOCK select S3C2410_PM if PM select S3C2440_DMA if S3C24XX_DMA + select SAMSUNG_HRT help Support for S3C2440 Samsung Mobile CPU based systems. @@ -70,6 +74,7 @@ config CPU_S3C2442 select CPU_LLSERIAL_S3C2440 select S3C2410_CLOCK select S3C2410_PM if PM + select SAMSUNG_HRT help Support for S3C2442 Samsung Mobile CPU based systems. @@ -84,6 +89,7 @@ config CPU_S3C2443 select S3C2443_COMMON select S3C2443_DMA if S3C24XX_DMA select SAMSUNG_CLKSRC + select SAMSUNG_HRT help Support for the S3C2443 SoC from the S3C24XX line @@ -395,6 +401,7 @@ config S3C2412_DMA config S3C2412_PM bool select S3C2412_PM_SLEEP + select SAMSUNG_WAKEMASK help Internal config node to apply S3C2412 power management diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index af53d27d5c36..6f46ecfc8396 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -14,7 +14,7 @@ obj- := # core -obj-y += common.o irq.o +obj-y += common.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o @@ -22,7 +22,7 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o @@ -31,9 +31,9 @@ obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index 8a2b4137ddb6..307c3714be55 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -21,6 +21,7 @@ extern void s3c2410_map_io(void); extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2410_init_clocks(int xtal); extern void s3c2410_restart(char mode, const char *cmd); +extern void s3c2410_init_irq(void); #else #define s3c2410_init_clocks NULL #define s3c2410_init_uarts NULL @@ -36,6 +37,7 @@ extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2412_init_clocks(int xtal); extern int s3c2412_baseclk_add(void); extern void s3c2412_restart(char mode, const char *cmd); +extern void s3c2412_init_irq(void); #else #define s3c2412_init_clocks NULL #define s3c2412_init_uarts NULL @@ -73,6 +75,7 @@ extern void s3c244x_restart(char mode, const char *cmd); #ifdef CONFIG_CPU_S3C2440 extern int s3c2440_init(void); extern void s3c2440_map_io(void); +extern void s3c2440_init_irq(void); #else #define s3c2440_init NULL #define s3c2440_map_io NULL @@ -81,6 +84,7 @@ extern void s3c2440_map_io(void); #ifdef CONFIG_CPU_S3C2442 extern int s3c2442_init(void); extern void s3c2442_map_io(void); +extern void s3c2442_init_irq(void); #else #define s3c2442_init NULL #define s3c2442_map_io NULL diff --git a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S deleted file mode 100644 index 6a21beeba1da..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S +++ /dev/null @@ -1,70 +0,0 @@ -/* - * arch/arm/mach-s3c2410/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for S3C2410-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -/* We have a problem that the INTOFFSET register does not always - * show one interrupt. Occasionally we get two interrupts through - * the prioritiser, and this causes the INTOFFSET register to show - * what looks like the logical-or of the two interrupt numbers. - * - * Thanks to Klaus, Shannon, et al for helping to debug this problem -*/ - -#define INTPND (0x10) -#define INTOFFSET (0x14) - -#include <mach/hardware.h> -#include <asm/irq.h> - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \base, #S3C24XX_VA_IRQ - - @@ try the interrupt offset register, since it is there - - ldr \irqstat, [\base, #INTPND ] - teq \irqstat, #0 - beq 1002f - ldr \irqnr, [\base, #INTOFFSET ] - mov \tmp, #1 - tst \irqstat, \tmp, lsl \irqnr - bne 1001f - - @@ the number specified is not a valid irq, so try - @@ and work it out for ourselves - - mov \irqnr, #0 @@ start here - - @@ work out which irq (if any) we got - - movs \tmp, \irqstat, lsl#16 - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr#16 - tst \irqstat, #0xff - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr#8 - tst \irqstat, #0xf - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr#4 - tst \irqstat, #0x3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr#2 - tst \irqstat, #0x1 - addeq \irqnr, \irqnr, #1 - - @@ we have the value -1001: - adds \irqnr, \irqnr, #IRQ_EINT0 -1002: - @@ exit here, Z flag unset if IRQ - - .endm diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h index 1e73f5fa8659..b6dd4cb5a2ec 100644 --- a/arch/arm/mach-s3c24xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h @@ -59,49 +59,53 @@ #define IRQ_ADCPARENT S3C2410_IRQ(31) /* interrupts generated from the external interrupts sources */ -#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */ -#define IRQ_EINT5 S3C2410_IRQ(33) -#define IRQ_EINT6 S3C2410_IRQ(34) -#define IRQ_EINT7 S3C2410_IRQ(35) -#define IRQ_EINT8 S3C2410_IRQ(36) -#define IRQ_EINT9 S3C2410_IRQ(37) -#define IRQ_EINT10 S3C2410_IRQ(38) -#define IRQ_EINT11 S3C2410_IRQ(39) -#define IRQ_EINT12 S3C2410_IRQ(40) -#define IRQ_EINT13 S3C2410_IRQ(41) -#define IRQ_EINT14 S3C2410_IRQ(42) -#define IRQ_EINT15 S3C2410_IRQ(43) -#define IRQ_EINT16 S3C2410_IRQ(44) -#define IRQ_EINT17 S3C2410_IRQ(45) -#define IRQ_EINT18 S3C2410_IRQ(46) -#define IRQ_EINT19 S3C2410_IRQ(47) -#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */ -#define IRQ_EINT21 S3C2410_IRQ(49) -#define IRQ_EINT22 S3C2410_IRQ(50) -#define IRQ_EINT23 S3C2410_IRQ(51) +#define IRQ_EINT0_2412 S3C2410_IRQ(32) +#define IRQ_EINT1_2412 S3C2410_IRQ(33) +#define IRQ_EINT2_2412 S3C2410_IRQ(34) +#define IRQ_EINT3_2412 S3C2410_IRQ(35) +#define IRQ_EINT4 S3C2410_IRQ(36) /* 52 */ +#define IRQ_EINT5 S3C2410_IRQ(37) +#define IRQ_EINT6 S3C2410_IRQ(38) +#define IRQ_EINT7 S3C2410_IRQ(39) +#define IRQ_EINT8 S3C2410_IRQ(40) +#define IRQ_EINT9 S3C2410_IRQ(41) +#define IRQ_EINT10 S3C2410_IRQ(42) +#define IRQ_EINT11 S3C2410_IRQ(43) +#define IRQ_EINT12 S3C2410_IRQ(44) +#define IRQ_EINT13 S3C2410_IRQ(45) +#define IRQ_EINT14 S3C2410_IRQ(46) +#define IRQ_EINT15 S3C2410_IRQ(47) +#define IRQ_EINT16 S3C2410_IRQ(48) +#define IRQ_EINT17 S3C2410_IRQ(49) +#define IRQ_EINT18 S3C2410_IRQ(50) +#define IRQ_EINT19 S3C2410_IRQ(51) +#define IRQ_EINT20 S3C2410_IRQ(52) /* 68 */ +#define IRQ_EINT21 S3C2410_IRQ(53) +#define IRQ_EINT22 S3C2410_IRQ(54) +#define IRQ_EINT23 S3C2410_IRQ(55) #define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4) #define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) -#define IRQ_LCD_FIFO S3C2410_IRQ(52) -#define IRQ_LCD_FRAME S3C2410_IRQ(53) +#define IRQ_LCD_FIFO S3C2410_IRQ(56) +#define IRQ_LCD_FRAME S3C2410_IRQ(57) /* IRQs for the interal UARTs, and ADC * these need to be ordered in number of appearance in the * SUBSRC mask register */ -#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54) +#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+58) -#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */ +#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 74 */ #define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1) #define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2) -#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */ +#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 77 */ #define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4) #define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5) -#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */ +#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 80 */ #define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7) #define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8) @@ -136,7 +140,7 @@ /* second interrupt-register of s3c2416/s3c2450 */ -#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 54 + 29) +#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 58 + 29) #define IRQ_S3C2416_2D S3C2416_IRQ(0) #define IRQ_S3C2416_IIC1 S3C2416_IRQ(1) #define IRQ_S3C2416_RESERVED2 S3C2416_IRQ(2) diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c deleted file mode 100644 index 67d763178d3f..000000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2412.c +++ /dev/null @@ -1,215 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/irq.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/irq.h> -#include <plat/pm.h> - -#include "s3c2412-power.h" - -#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) -#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0)))) - -/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by - * having them turn up in both the INT* and the EINT* registers. Whilst - * both show the status, they both now need to be acked when the IRQs - * go off. -*/ - -static void -s3c2412_irq_mask(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask | bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); -} - -static inline void -s3c2412_irq_ack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static inline void -s3c2412_irq_maskack(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask|bitval, S3C2410_INTMSK); - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask | bitval, S3C2412_EINTMASK); - - __raw_writel(bitval, S3C2412_EINTPEND); - __raw_writel(bitval, S3C2410_SRCPND); - __raw_writel(bitval, S3C2410_INTPND); -} - -static void -s3c2412_irq_unmask(struct irq_data *data) -{ - unsigned long bitval = 1UL << (data->irq - IRQ_EINT0); - unsigned long mask; - - mask = __raw_readl(S3C2412_EINTMASK); - __raw_writel(mask & ~bitval, S3C2412_EINTMASK); - - mask = __raw_readl(S3C2410_INTMSK); - __raw_writel(mask & ~bitval, S3C2410_INTMSK); -} - -static struct irq_chip s3c2412_irq_eint0t4 = { - .irq_ack = s3c2412_irq_ack, - .irq_mask = s3c2412_irq_mask, - .irq_unmask = s3c2412_irq_unmask, - .irq_set_wake = s3c_irq_wake, - .irq_set_type = s3c_irqext_type, -}; - -#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0))) - -/* CF and SDI sub interrupts */ - -static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - - if (subsrc & INTBIT(IRQ_S3C2412_SDI)) - generic_handle_irq(IRQ_S3C2412_SDI); - - if (subsrc & INTBIT(IRQ_S3C2412_CF)) - generic_handle_irq(IRQ_S3C2412_CF); -} - -#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0)) -#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF) - -static void s3c2412_irq_cfsdi_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI); -} - -static void s3c2412_irq_cfsdi_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CFSDI); -} - -static void s3c2412_irq_cfsdi_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI); -} - -static struct irq_chip s3c2412_irq_cfsdi = { - .name = "s3c2412-cfsdi", - .irq_ack = s3c2412_irq_cfsdi_ack, - .irq_mask = s3c2412_irq_cfsdi_mask, - .irq_unmask = s3c2412_irq_cfsdi_unmask, -}; - -static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state) -{ - unsigned long pwrcfg; - - pwrcfg = __raw_readl(S3C2412_PWRCFG); - if (state) - pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ; - else - pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ; - __raw_writel(pwrcfg, S3C2412_PWRCFG); - - return s3c_irq_chip.irq_set_wake(data, state); -} - -static struct irq_chip s3c2412_irq_rtc_chip; - -static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) { - irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4, - handle_edge_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* add demux support for CF/SDI */ - - irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi); - - for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) { - irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - /* change RTC IRQ's set wake method */ - - s3c2412_irq_rtc_chip = s3c_irq_chip; - s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake; - - irq_set_chip(IRQ_RTC, &s3c2412_irq_rtc_chip); - - return 0; -} - -static struct subsys_interface s3c2412_irq_interface = { - .name = "s3c2412_irq", - .subsys = &s3c2412_subsys, - .add_dev = s3c2412_irq_add, -}; - -static int s3c2412_irq_init(void) -{ - return subsys_interface_register(&s3c2412_irq_interface); -} - -arch_initcall(s3c2412_irq_init); diff --git a/arch/arm/mach-s3c24xx/irq-s3c2440.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c deleted file mode 100644 index 4a18cde439cc..000000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c2440.c +++ /dev/null @@ -1,128 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -/* WDT/AC97 */ - -static void s3c_irq_demux_wdtac97(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 13; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_WDT); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_AC97); - } - } -} - - -#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0)) - -static void -s3c_irq_wdtac97_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13); -} - -static void -s3c_irq_wdtac97_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_WDT); -} - -static void -s3c_irq_wdtac97_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13); -} - -static struct irq_chip s3c_irq_wdtac97 = { - .irq_mask = s3c_irq_wdtac97_mask, - .irq_unmask = s3c_irq_wdtac97_unmask, - .irq_ack = s3c_irq_wdtac97_ack, -}; - -static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - printk("S3C2440: IRQ Support\n"); - - /* add new chained handler for wdt, ac7 */ - - irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97); - - for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - diff --git a/arch/arm/mach-s3c24xx/irq-s3c244x.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c deleted file mode 100644 index 5fe8e58d3afd..000000000000 --- a/arch/arm/mach-s3c24xx/irq-s3c244x.c +++ /dev/null @@ -1,142 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -#include <plat/cpu.h> -#include <plat/pm.h> -#include <plat/irq.h> - -/* camera irq */ - -static void s3c_irq_demux_cam(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int subsrc, submsk; - - /* read the current pending interrupts, and the mask - * for what it is available */ - - subsrc = __raw_readl(S3C2410_SUBSRCPND); - submsk = __raw_readl(S3C2410_INTSUBMSK); - - subsrc &= ~submsk; - subsrc >>= 11; - subsrc &= 3; - - if (subsrc != 0) { - if (subsrc & 1) { - generic_handle_irq(IRQ_S3C2440_CAM_C); - } - if (subsrc & 2) { - generic_handle_irq(IRQ_S3C2440_CAM_P); - } - } -} - -#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0)) - -static void -s3c_irq_cam_mask(struct irq_data *data) -{ - s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11); -} - -static void -s3c_irq_cam_unmask(struct irq_data *data) -{ - s3c_irqsub_unmask(data->irq, INTMSK_CAM); -} - -static void -s3c_irq_cam_ack(struct irq_data *data) -{ - s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11); -} - -static struct irq_chip s3c_irq_cam = { - .irq_mask = s3c_irq_cam_mask, - .irq_unmask = s3c_irq_cam_unmask, - .irq_ack = s3c_irq_cam_ack, -}; - -static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned int irqno; - - irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip, - handle_level_irq); - set_irq_flags(IRQ_NFCON, IRQF_VALID); - - /* add chained handler for camera */ - - irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip, - handle_level_irq); - irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam); - - for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) { - irq_set_chip_and_handler(irqno, &s3c_irq_cam, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - - return 0; -} - -static struct subsys_interface s3c2440_irq_interface = { - .name = "s3c2440_irq", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_irq_add, -}; - -static int s3c2440_irq_init(void) -{ - return subsys_interface_register(&s3c2440_irq_interface); -} - -arch_initcall(s3c2440_irq_init); - -static struct subsys_interface s3c2442_irq_interface = { - .name = "s3c2442_irq", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_irq_add, -}; - - -static int s3c2442_irq_init(void) -{ - return subsys_interface_register(&s3c2442_irq_interface); -} - -arch_initcall(s3c2442_irq_init); diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 0e0279e79150..e27b5c91b3db 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -63,6 +63,8 @@ #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include <plat/samsung-time.h> + #include "common.h" static struct resource amlm5900_nor_resource = @@ -160,6 +162,7 @@ static void __init amlm5900_map_io(void) s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } #ifdef CONFIG_FB_S3C2410 @@ -235,8 +238,8 @@ static void __init amlm5900_init(void) MACHINE_START(AML_M5900, "AML_M5900") .atag_offset = 0x100, .map_io = amlm5900_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index bb595f15ce36..c1fb6c37867f 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> +#include <plat/samsung-time.h> #include "anubis.h" #include "common.h" @@ -410,6 +411,7 @@ static void __init anubis_map_io(void) s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* check for the newer revision boards with large page nand */ @@ -443,7 +445,7 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .atag_offset = 0x100, .map_io = anubis_map_io, .init_machine = anubis_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index b4bc60c78ebb..6dfeeb7ef469 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -48,6 +48,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/mmc-s3cmci.h> +#include <plat/samsung-time.h> #include "common.h" @@ -192,6 +193,7 @@ static void __init at2440evb_map_io(void) s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init at2440evb_init(void) @@ -209,7 +211,7 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .atag_offset = 0x100, .map_io = at2440evb_map_io, .init_machine = at2440evb_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index ca6618081041..22d6ae926d91 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -55,6 +55,7 @@ #include <plat/devs.h> #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "bast.h" #include "common.h" @@ -576,6 +577,7 @@ static void __init bast_map_io(void) s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init bast_init(void) @@ -603,8 +605,8 @@ MACHINE_START(BAST, "Simtec-BAST") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = bast_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = bast_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index a25e8c5a7b4c..13d8d073675a 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -81,6 +81,7 @@ #include <plat/gpio-cfg.h> #include <plat/pm.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "gta02.h" @@ -501,6 +502,7 @@ static void __init gta02_map_io(void) s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -587,8 +589,8 @@ MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ .atag_offset = 0x100, .map_io = gta02_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 79bc0830d740..af4334d6b4d5 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -62,7 +62,7 @@ #include <plat/pll.h> #include <plat/pm.h> #include <plat/regs-serial.h> - +#include <plat/samsung-time.h> #include "common.h" #include "h1940.h" @@ -646,6 +646,7 @@ static void __init h1940_map_io(void) s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* setup PM */ @@ -666,11 +667,6 @@ static void __init h1940_reserve(void) memblock_reserve(0x30081000, 0x1000); } -static void __init h1940_init_irq(void) -{ - s3c24xx_init_irq(); -} - static void __init h1940_init(void) { u32 tmp; @@ -739,8 +735,8 @@ MACHINE_START(H1940, "IPAQ-H1940") .atag_offset = 0x100, .map_io = h1940_map_io, .reserve = h1940_reserve, - .init_irq = h1940_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = h1940_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index ca08d7df07f7..a45fcd8ccf79 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -52,6 +52,7 @@ #include <plat/cpu.h> #include <plat/pm.h> #include <linux/platform_data/usb-s3c2410_udc.h> +#include <plat/samsung-time.h> #include "common.h" #include "s3c2412-power.h" @@ -506,6 +507,7 @@ static void __init jive_map_io(void) s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void jive_power_off(void) @@ -658,9 +660,9 @@ MACHINE_START(JIVE, "JIVE") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 2865e5919f2c..a83db46320bc 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -56,6 +56,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include <sound/s3c24xx_uda134x.h> @@ -525,6 +526,7 @@ static void __init mini2440_map_io(void) s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } /* @@ -686,7 +688,7 @@ MACHINE_START(MINI2440, "MINI2440") .atag_offset = 0x100, .map_io = mini2440_map_io, .init_machine = mini2440_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 8017c0fc1729..2cb46c37c920 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <linux/platform_data/mmc-s3cmci.h> #include <linux/platform_data/usb-s3c2410_udc.h> +#include <plat/samsung-time.h> #include "common.h" @@ -535,6 +536,7 @@ static void __init n30_map_io(void) n30_hwinit(); s3c24xx_init_clocks(0); s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } /* GPB3 is the line that controls the pull-up for the USB D+ line */ @@ -588,9 +590,9 @@ MACHINE_START(N30, "Acer-N30") Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END @@ -599,9 +601,9 @@ MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ .atag_offset = 0x100, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .init_machine = n30_init, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .map_io = n30_map_io, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 144b9f80c4a5..01f4354206f9 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -44,6 +44,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" @@ -135,6 +136,7 @@ static void __init nexcoder_map_io(void) s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); nexcoder_sensorboard_init(); } @@ -150,7 +152,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .atag_offset = 0x100, .map_io = nexcoder_map_io, .init_machine = nexcoder_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2440_init_irq, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index ae2cbdf3e3ca..58d6fbe5bf1f 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -45,6 +45,7 @@ #include <plat/devs.h> #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include <mach/hardware.h> #include <mach/regs-gpio.h> @@ -384,6 +385,7 @@ static void __init osiris_map_io(void) s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* check for the newer revision boards with large page nand */ @@ -424,8 +426,8 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = osiris_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .init_machine = osiris_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index deb0ace585b0..7e16b0740ec1 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -33,6 +33,7 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "otom.h" @@ -101,6 +102,7 @@ static void __init otom11_map_io(void) s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init otom11_init(void) @@ -114,7 +116,7 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .atag_offset = 0x100, .map_io = otom11_map_io, .init_machine = otom11_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2410_init_irq, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 84c541602661..f8feaeadb55a 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -59,6 +59,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/samsung-time.h> #include "common.h" #include "common-smdk.h" @@ -304,6 +305,7 @@ static void __init qt2410_map_io(void) s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); s3c24xx_init_clocks(12*1000*1000); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init qt2410_machine_init(void) @@ -341,8 +343,8 @@ static void __init qt2410_machine_init(void) MACHINE_START(QT2410, "QT2410") .atag_offset = 0x100, .map_io = qt2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 43f3ac5a1c7a..44ca018e1f96 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -57,6 +57,7 @@ #include <plat/devs.h> #include <plat/pm.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "h1940.h" @@ -740,6 +741,7 @@ static void __init rx1950_map_io(void) s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* setup PM */ @@ -810,8 +812,8 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .atag_offset = 0x100, .map_io = rx1950_map_io, .reserve = rx1950_reserve, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2442_init_irq, .init_machine = rx1950_init_machine, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index f20418a2fb1b..3bc6231d0a1f 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <plat/pm.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "common.h" #include "h1940.h" @@ -179,6 +180,7 @@ static void __init rx3715_map_io(void) s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } /* H1940 and RX3715 need to reserve this for suspend */ @@ -188,11 +190,6 @@ static void __init rx3715_reserve(void) memblock_reserve(0x30081000, 0x1000); } -static void __init rx3715_init_irq(void) -{ - s3c24xx_init_irq(); -} - static void __init rx3715_init_machine(void) { #ifdef CONFIG_PM_H1940 @@ -210,8 +207,8 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .atag_offset = 0x100, .map_io = rx3715_map_io, .reserve = rx3715_reserve, - .init_irq = rx3715_init_irq, + .init_irq = s3c2440_init_irq, .init_machine = rx3715_init_machine, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index cd0b1635c47e..a773789e4f38 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -51,6 +51,7 @@ #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" #include "common-smdk.h" @@ -100,6 +101,7 @@ static void __init smdk2410_map_io(void) s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2410_init(void) @@ -114,8 +116,8 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc /* Maintainer: Jonas Dietsche */ .atag_offset = 0x100, .map_io = smdk2410_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 79485907950f..8146e920f10d 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -44,6 +44,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" #include "common-smdk.h" @@ -105,6 +106,7 @@ static void __init smdk2413_map_io(void) s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2413_machine_init(void) @@ -128,10 +130,10 @@ MACHINE_START(S3C2413, "S3C2413") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END @@ -140,10 +142,10 @@ MACHINE_START(SMDK2412, "SMDK2412") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END @@ -152,9 +154,9 @@ MACHINE_START(SMDK2413, "SMDK2413") .atag_offset = 0x100, .fixup = smdk2413_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index 037a5da343bd..cb46847c66b4 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -50,6 +50,7 @@ #include <plat/sdhci.h> #include <linux/platform_data/usb-s3c2410_udc.h> #include <linux/platform_data/s3c-hsudc.h> +#include <plat/samsung-time.h> #include <plat/fb.h> @@ -221,6 +222,7 @@ static void __init smdk2416_map_io(void) s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2416_machine_init(void) @@ -253,6 +255,6 @@ MACHINE_START(SMDK2416, "SMDK2416") .init_irq = s3c2416_init_irq, .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index 29d31314e23c..de2e5d39a847 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -41,6 +41,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" #include "common-smdk.h" @@ -160,6 +161,7 @@ static void __init smdk2440_map_io(void) s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2440_machine_init(void) @@ -175,9 +177,9 @@ MACHINE_START(S3C2440, "SMDK2440") /* Maintainer: Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2440_init_irq, .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index b3be4c4dc7bc..9435c3bef18a 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -41,6 +41,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" #include "common-smdk.h" @@ -121,6 +122,7 @@ static void __init smdk2443_map_io(void) s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdk2443_machine_init(void) @@ -142,6 +144,6 @@ MACHINE_START(SMDK2443, "SMDK2443") .init_irq = s3c2443_init_irq, .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2443_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 24b3d79e7b2c..7fad8f055cab 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -53,6 +53,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/map.h> #include <linux/mtd/physmap.h> +#include <plat/samsung-time.h> #include "common.h" @@ -136,6 +137,7 @@ static void __init tct_hammer_map_io(void) s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init tct_hammer_init(void) @@ -147,8 +149,8 @@ static void __init tct_hammer_init(void) MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .atag_offset = 0x100, .map_io = tct_hammer_map_io, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index ec42d1e4e465..42e7187fed60 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -45,6 +45,7 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/regs-serial.h> +#include <plat/samsung-time.h> #include "bast.h" #include "common.h" @@ -332,6 +333,7 @@ static void __init vr1000_map_io(void) s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init vr1000_init(void) @@ -353,7 +355,7 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .atag_offset = 0x100, .map_io = vr1000_map_io, .init_machine = vr1000_init, - .init_irq = s3c24xx_init_irq, - .init_time = s3c24xx_timer_init, + .init_irq = s3c2410_init_irq, + .init_time = samsung_timer_init, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index 239129c2d8bc..b66588428ec9 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -44,6 +44,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" @@ -142,6 +143,7 @@ static void __init vstms_map_io(void) s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init vstms_init(void) @@ -156,9 +158,9 @@ MACHINE_START(VSTMS, "VSTMS") .atag_offset = 0x100, .fixup = vstms_fixup, - .init_irq = s3c24xx_init_irq, + .init_irq = s3c2412_init_irq, .init_machine = vstms_init, .map_io = vstms_map_io, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c index 4c4bc1c83b77..d75f95e487ee 100644 --- a/arch/arm/mach-s3c24xx/pm-s3c2412.c +++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c @@ -29,6 +29,7 @@ #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/wakeup-mask.h> #include "regs-dsc.h" #include "s3c2412-power.h" @@ -51,8 +52,15 @@ static int s3c2412_cpu_suspend(unsigned long arg) return 1; /* Aborting suspend */ } +/* mapping of interrupts to parts of the wakeup mask */ +static struct samsung_wakeup_mask wake_irqs[] = { + { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, }, +}; + static void s3c2412_pm_prepare(void) { + samsung_sync_wakemask(S3C2412_PWRCFG, + wake_irqs, ARRAY_SIZE(wake_irqs)); } static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif) diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 131c86284711..283cb77d4721 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -17,11 +17,13 @@ config PLAT_S3C64XX # Configuration options for the S3C6410 CPU config CPU_S3C6400 + select SAMSUNG_HRT bool help Enable S3C6400 CPU support config CPU_S3C6410 + select SAMSUNG_HRT bool help Enable S3C6410 CPU support diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 728eef3296b2..35e3f54574ef 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -49,6 +49,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <mach/regs-gpio.h> +#include <plat/samsung-time.h> #include "common.h" #include "regs-modem.h" @@ -208,6 +209,7 @@ static void __init anw6410_map_io(void) s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); anw6410_lcd_mode_set(); } @@ -232,6 +234,6 @@ MACHINE_START(ANW6410, "A&W6410") .map_io = anw6410_map_io, .init_machine = anw6410_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 1acf02bace57..8ad88ace795a 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -64,6 +64,7 @@ #include <plat/adc.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/pm.h> +#include <plat/samsung-time.h> #include "common.h" #include "crag6410.h" @@ -744,6 +745,7 @@ static void __init crag6410_map_io(void) s3c64xx_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* LCD type and Bypass set by bootloader */ } @@ -868,6 +870,6 @@ MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410") .map_io = crag6410_map_io, .init_machine = crag6410_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 7212eb9cfeb9..5b7f357d8c22 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -41,6 +41,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" @@ -248,6 +249,7 @@ static void __init hmt_map_io(void) s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init hmt_machine_init(void) @@ -275,6 +277,6 @@ MACHINE_START(HMT, "Airgoo-HMT") .map_io = hmt_map_io, .init_machine = hmt_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 4b41fcdaa7b6..fc043e3ecdf8 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -41,6 +41,7 @@ #include <video/platform_lcd.h> #include <video/samsung_fimd.h> +#include <plat/samsung-time.h> #include "common.h" #include "regs-modem.h" @@ -232,6 +233,7 @@ static void __init mini6410_map_io(void) s3c64xx_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* set the LCD type */ tmp = __raw_readl(S3C64XX_SPCON); @@ -354,6 +356,6 @@ MACHINE_START(MINI6410, "MINI6410") .map_io = mini6410_map_io, .init_machine = mini6410_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 8d3cedd995ff..7e2c3908f1f8 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -43,6 +43,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/samsung-time.h> #include "common.h" @@ -87,6 +88,7 @@ static void __init ncp_map_io(void) s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init ncp_machine_init(void) @@ -103,6 +105,6 @@ MACHINE_START(NCP, "NCP") .map_io = ncp_map_io, .init_machine = ncp_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index fa12bd21ad82..8bed37b3d5ac 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -42,6 +42,7 @@ #include <video/platform_lcd.h> #include <video/samsung_fimd.h> +#include <plat/samsung-time.h> #include "common.h" #include "regs-modem.h" @@ -211,6 +212,7 @@ static void __init real6410_map_io(void) s3c64xx_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* set the LCD type */ tmp = __raw_readl(S3C64XX_SPCON); @@ -333,6 +335,6 @@ MACHINE_START(REAL6410, "REAL6410") .map_io = real6410_map_io, .init_machine = real6410_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index fc3e9b32e26f..58ac99041274 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -38,6 +38,7 @@ #include <linux/platform_data/touchscreen-s3c2410.h> #include <video/platform_lcd.h> +#include <plat/samsung-time.h> #include "common.h" #include "regs-modem.h" @@ -378,6 +379,7 @@ void __init smartq_map_io(void) s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); smartq_lcd_mode_set(); } diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index ca2afcfce573..8aca5daf3d05 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -28,6 +28,7 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> +#include <plat/samsung-time.h> #include "common.h" #include "mach-smartq.h" @@ -155,6 +156,6 @@ MACHINE_START(SMARTQ5, "SmartQ 5") .map_io = smartq_map_io, .init_machine = smartq5_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index 37bb0c632a5e..a052e107c0b4 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -28,6 +28,7 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> +#include <plat/samsung-time.h> #include "common.h" #include "mach-smartq.h" @@ -171,6 +172,6 @@ MACHINE_START(SMARTQ7, "SmartQ 7") .map_io = smartq_map_io, .init_machine = smartq7_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index a392869c8342..d70c0843aea2 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -35,6 +35,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/i2c-s3c2410.h> +#include <plat/samsung-time.h> #include "common.h" @@ -66,6 +67,7 @@ static void __init smdk6400_map_io(void) s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static struct platform_device *smdk6400_devices[] __initdata = { @@ -92,6 +94,6 @@ MACHINE_START(SMDK6400, "SMDK6400") .map_io = smdk6400_map_io, .init_machine = smdk6400_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index ba7544e2d04d..bd3295a19ad7 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -69,6 +69,7 @@ #include <linux/platform_data/touchscreen-s3c2410.h> #include <plat/keypad.h> #include <plat/backlight.h> +#include <plat/samsung-time.h> #include "common.h" #include "regs-modem.h" @@ -634,6 +635,7 @@ static void __init smdk6410_map_io(void) s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* set the LCD type */ @@ -702,6 +704,6 @@ MACHINE_START(SMDK6410, "SMDK6410") .map_io = smdk6410_map_io, .init_machine = smdk6410_machine_init, .init_late = s3c64xx_init_late, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s3c64xx_restart, MACHINE_END diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index e8742cb7ddd9..5a707bdb9ea0 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -9,16 +9,16 @@ if ARCH_S5P64X0 config CPU_S5P6440 bool - select S5P_HRT select S5P_SLEEP if PM select SAMSUNG_DMADEV + select SAMSUNG_HRT select SAMSUNG_WAKEMASK if PM help Enable S5P6440 CPU support config CPU_S5P6450 bool - select S5P_HRT + select SAMSUNG_HRT select S5P_SLEEP if PM select SAMSUNG_DMADEV select SAMSUNG_WAKEMASK if PM diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index e23723a5a214..73f71a698a34 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -48,7 +48,7 @@ #include <plat/pll.h> #include <plat/adc.h> #include <linux/platform_data/touchscreen-s3c2410.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include <plat/backlight.h> #include <plat/fb.h> #include <plat/sdhci.h> @@ -229,7 +229,7 @@ static void __init smdk6440_map_io(void) s5p64x0_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void s5p6440_set_lcd_interface(void) @@ -273,6 +273,6 @@ MACHINE_START(SMDK6440, "SMDK6440") .init_irq = s5p6440_init_irq, .map_io = smdk6440_map_io, .init_machine = smdk6440_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .restart = s5p64x0_restart, MACHINE_END diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index ca10963a959e..18303e12019f 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -48,7 +48,7 @@ #include <plat/pll.h> #include <plat/adc.h> #include <linux/platform_data/touchscreen-s3c2410.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include <plat/backlight.h> #include <plat/fb.h> #include <plat/sdhci.h> @@ -248,7 +248,7 @@ static void __init smdk6450_map_io(void) s5p64x0_init_io(NULL, 0); s3c24xx_init_clocks(19200000); s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void s5p6450_set_lcd_interface(void) @@ -292,6 +292,6 @@ MACHINE_START(SMDK6450, "SMDK6450") .init_irq = s5p6450_init_irq, .map_io = smdk6450_map_io, .init_machine = smdk6450_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .restart = s5p64x0_restart, MACHINE_END diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 15170be97a74..2f456a4533ba 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -11,6 +11,7 @@ config CPU_S5PC100 bool select S5P_EXT_INT select SAMSUNG_DMADEV + select SAMSUNG_HRT help Enable S5PC100 CPU support diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 185a19583898..8c880f76f274 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -51,6 +51,7 @@ #include <linux/platform_data/touchscreen-s3c2410.h> #include <linux/platform_data/asoc-s3c.h> #include <plat/backlight.h> +#include <plat/samsung-time.h> #include "common.h" @@ -221,6 +222,7 @@ static void __init smdkc100_map_io(void) s5pc100_init_io(NULL, 0); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs)); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdkc100_machine_init(void) @@ -255,6 +257,6 @@ MACHINE_START(SMDKC100, "SMDKC100") .init_irq = s5pc100_init_irq, .map_io = smdkc100_map_io, .init_machine = smdkc100_machine_init, - .init_time = s3c24xx_timer_init, + .init_time = samsung_timer_init, .restart = s5pc100_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 92ad72f0ef98..0963283a7c5d 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -12,10 +12,10 @@ if ARCH_S5PV210 config CPU_S5PV210 bool select S5P_EXT_INT - select S5P_HRT select S5P_PM if PM select S5P_SLEEP if PM select SAMSUNG_DMADEV + select SAMSUNG_HRT help Enable S5PV210 CPU support diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 11900a8e88a3..ed2b85485b9d 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -38,7 +38,7 @@ #include <plat/fb.h> #include <plat/fimc-core.h> #include <plat/sdhci.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include "common.h" @@ -651,7 +651,7 @@ static void __init aquila_map_io(void) s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init aquila_machine_init(void) @@ -686,6 +686,6 @@ MACHINE_START(AQUILA, "Aquila") .init_irq = s5pv210_init_irq, .map_io = aquila_map_io, .init_machine = aquila_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index e373de44a8b6..30b24ad84f49 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -47,7 +47,7 @@ #include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/clock.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include <plat/mfc.h> #include <plat/camport.h> @@ -908,7 +908,7 @@ static void __init goni_map_io(void) s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init goni_reserve(void) @@ -973,7 +973,7 @@ MACHINE_START(GONI, "GONI") .init_irq = s5pv210_init_irq, .map_io = goni_map_io, .init_machine = goni_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .reserve = &goni_reserve, .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 28bd0248a3e2..7c0ed07a78a3 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -29,7 +29,7 @@ #include <linux/platform_data/ata-samsung_cf.h> #include <linux/platform_data/i2c-s3c2410.h> #include <plat/pm.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include <plat/mfc.h> #include "common.h" @@ -120,7 +120,7 @@ static void __init smdkc110_map_io(void) s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init smdkc110_reserve(void) @@ -153,7 +153,7 @@ MACHINE_START(SMDKC110, "SMDKC110") .init_irq = s5pv210_init_irq, .map_io = smdkc110_map_io, .init_machine = smdkc110_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .restart = s5pv210_restart, .reserve = &smdkc110_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 3c73f36869bb..d50b6f124465 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -44,7 +44,7 @@ #include <plat/keypad.h> #include <plat/pm.h> #include <plat/fb.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include <plat/backlight.h> #include <plat/mfc.h> #include <plat/clock.h> @@ -285,7 +285,7 @@ static void __init smdkv210_map_io(void) s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); - s5p_set_timer_source(S5P_PWM2, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); } static void __init smdkv210_reserve(void) @@ -329,7 +329,7 @@ MACHINE_START(SMDKV210, "SMDKV210") .init_irq = s5pv210_init_irq, .map_io = smdkv210_map_io, .init_machine = smdkv210_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .restart = s5pv210_restart, .reserve = &smdkv210_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c index 2d4c5531819c..579afe89842a 100644 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -26,7 +26,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> #include "common.h" @@ -106,7 +106,7 @@ static void __init torbreck_map_io(void) s5pv210_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs)); - s5p_set_timer_source(S5P_PWM3, S5P_PWM4); + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } static void __init torbreck_machine_init(void) @@ -130,6 +130,6 @@ MACHINE_START(TORBRECK, "TORBRECK") .init_irq = s5pv210_init_irq, .map_io = torbreck_map_io, .init_machine = torbreck_machine_init, - .init_time = s5p_timer_init, + .init_time = samsung_timer_init, .restart = s5pv210_restart, MACHINE_END diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 9255546e7bf6..75d413c004b6 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -16,6 +16,7 @@ config ARCH_SH73A0 select CPU_V7 select I2C select SH_CLK_CPG + select RENESAS_INTC_IRQPIN config ARCH_R8A7740 bool "R-Mobile A1 (R8A77400)" @@ -31,6 +32,7 @@ config ARCH_R8A7779 select SH_CLK_CPG select USB_ARCH_HAS_EHCI select USB_ARCH_HAS_OHCI + select RENESAS_INTC_IRQPIN config ARCH_EMEV2 bool "Emma Mobile EV2" diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index a385f570bbfc..95fe396f9604 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -81,7 +81,7 @@ static struct resource smsc9221_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x260), /* IRQ3 */ + .start = irq_pin(3), /* IRQ3 */ .flags = IORESOURCE_IRQ, }, }; @@ -115,7 +115,7 @@ static struct resource usb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x220), /* IRQ1 */ + .start = irq_pin(1), /* IRQ1 */ .flags = IORESOURCE_IRQ, }, }; @@ -138,7 +138,7 @@ struct usbhs_private { struct renesas_usbhs_platform_info info; }; -#define IRQ15 intcs_evt2irq(0x03e0) +#define IRQ15 irq_pin(15) #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -567,25 +567,25 @@ static struct i2c_board_info i2c0_devices[] = { }, { I2C_BOARD_INFO("ak8975", 0x0c), - .irq = intcs_evt2irq(0x3380), /* IRQ28 */ + .irq = irq_pin(28), /* IRQ28 */ }, { I2C_BOARD_INFO("adxl34x", 0x1d), - .irq = intcs_evt2irq(0x3340), /* IRQ26 */ + .irq = irq_pin(26), /* IRQ26 */ }, }; static struct i2c_board_info i2c1_devices[] = { { I2C_BOARD_INFO("st1232-ts", 0x55), - .irq = intcs_evt2irq(0x300), /* IRQ8 */ + .irq = irq_pin(8), /* IRQ8 */ }, }; static struct i2c_board_info i2c3_devices[] = { { I2C_BOARD_INFO("pcf8575", 0x20), - .irq = intcs_evt2irq(0x3260), /* IRQ19 */ + .irq = irq_pin(19), /* IRQ19 */ .platform_data = &pcf8575_pdata, }, }; diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 62c04c252418..1fef737a4c1a 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -58,6 +58,7 @@ extern void r8a7740_pm_init(void); extern void r8a7779_init_delay(void); extern void r8a7779_init_irq(void); +extern void r8a7779_init_irq_extpin(int irlm); extern void r8a7779_init_irq_dt(void); extern void r8a7779_map_io(void); extern void r8a7779_earlytimer_init(void); diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index 992ed213cec1..b2074e2acb15 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -12,4 +12,8 @@ #define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) #define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt)) +/* External IRQ pins */ +#define IRQPIN_BASE 2000 +#define irq_pin(nr) ((nr) + IRQPIN_BASE) + #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c index f9cc4bc9c798..b86dc8908724 100644 --- a/arch/arm/mach-shmobile/intc-r8a7779.c +++ b/arch/arm/mach-shmobile/intc-r8a7779.c @@ -19,13 +19,16 @@ */ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/irqchip/arm-gic.h> -#include <mach/common.h> +#include <linux/platform_data/irq-renesas-intc-irqpin.h> #include <linux/irqchip.h> +#include <mach/common.h> #include <mach/intc.h> +#include <mach/irqs.h> #include <mach/r8a7779.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,6 +42,54 @@ #define INT2NTSR0 IOMEM(0xfe700060) #define INT2NTSR1 IOMEM(0xfe700064) +static struct renesas_intc_irqpin_config irqpin0_platform_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ + .sense_bitfield_width = 2, +}; + +static struct resource irqpin0_resources[] = { + DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */ + DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */ + DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */ + DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */ + DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */ + DEFINE_RES_IRQ(gic_spi(27)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_spi(28)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_spi(29)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */ +}; + +static struct platform_device irqpin0_device = { + .name = "renesas_intc_irqpin", + .id = 0, + .resource = irqpin0_resources, + .num_resources = ARRAY_SIZE(irqpin0_resources), + .dev = { + .platform_data = &irqpin0_platform_data, + }, +}; + +void __init r8a7779_init_irq_extpin(int irlm) +{ + void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE); + unsigned long tmp; + + if (icr0) { + tmp = ioread32(icr0); + if (irlm) + tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */ + else + tmp &= ~(1 << 23); /* IRL mode - not supported */ + tmp |= (1 << 21); /* LVLMODE = 1 */ + iowrite32(tmp, icr0); + iounmap(icr0); + + if (irlm) + platform_device_register(&irqpin0_device); + } else + pr_warn("r8a7779: unable to setup external irq pin mode\n"); +} + static int r8a7779_set_wake(struct irq_data *data, unsigned int on) { return 0; /* always allow wakeup */ diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index a81a1d804e2e..19a26f4579b3 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -260,108 +260,6 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on) return 0; /* always allow wakeup */ } -#define RELOC_BASE 0x1200 - -/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */ -#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE) - -INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, - INTCS_VECT_RELOC, "sh73a0-intca-irq-pins"); - -static int to_gic_irq(struct irq_data *data) -{ - unsigned int vect = irq2evt(data->irq) - INTCS_VECT_BASE; - - if (vect >= 0x3200) - vect -= 0x3000; - else - vect -= 0x0200; - - return gic_spi((vect >> 5) + 1); -} - -static int to_intca_reloc_irq(struct irq_data *data) -{ - return data->irq + (RELOC_BASE >> 5); -} - -#define irq_cb(cb, irq) irq_get_chip(irq)->cb(irq_get_irq_data(irq)) -#define irq_cbp(cb, irq, p...) irq_get_chip(irq)->cb(irq_get_irq_data(irq), p) - -static void intca_gic_enable(struct irq_data *data) -{ - irq_cb(irq_unmask, to_intca_reloc_irq(data)); - irq_cb(irq_unmask, to_gic_irq(data)); -} - -static void intca_gic_disable(struct irq_data *data) -{ - irq_cb(irq_mask, to_gic_irq(data)); - irq_cb(irq_mask, to_intca_reloc_irq(data)); -} - -static void intca_gic_mask_ack(struct irq_data *data) -{ - irq_cb(irq_mask, to_gic_irq(data)); - irq_cb(irq_mask_ack, to_intca_reloc_irq(data)); -} - -static void intca_gic_eoi(struct irq_data *data) -{ - irq_cb(irq_eoi, to_gic_irq(data)); -} - -static int intca_gic_set_type(struct irq_data *data, unsigned int type) -{ - return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type); -} - -#ifdef CONFIG_SMP -static int intca_gic_set_affinity(struct irq_data *data, - const struct cpumask *cpumask, - bool force) -{ - return irq_cbp(irq_set_affinity, to_gic_irq(data), cpumask, force); -} -#endif - -struct irq_chip intca_gic_irq_chip = { - .name = "INTCA-GIC", - .irq_mask = intca_gic_disable, - .irq_unmask = intca_gic_enable, - .irq_mask_ack = intca_gic_mask_ack, - .irq_eoi = intca_gic_eoi, - .irq_enable = intca_gic_enable, - .irq_disable = intca_gic_disable, - .irq_shutdown = intca_gic_disable, - .irq_set_type = intca_gic_set_type, - .irq_set_wake = sh73a0_set_wake, -#ifdef CONFIG_SMP - .irq_set_affinity = intca_gic_set_affinity, -#endif -}; - -static int to_intc_vect(int irq) -{ - unsigned int irq_pin = irq - gic_spi(1); - unsigned int offs; - - if (irq_pin < 16) - offs = 0x0200; - else - offs = 0x3000; - - return offs + (irq_pin << 5); -} - -static irqreturn_t sh73a0_irq_pin_demux(int irq, void *dev_id) -{ - generic_handle_irq(intcs_evt2irq(to_intc_vect(irq))); - return IRQ_HANDLED; -} - -static struct irqaction sh73a0_irq_pin_cascade[32]; - #define PINTER0_PHYS 0xe69000a0 #define PINTER1_PHYS 0xe69000a4 #define PINTER0_VIRT IOMEM(0xe69000a0) @@ -422,13 +320,11 @@ void __init sh73a0_init_irq(void) void __iomem *gic_dist_base = IOMEM(0xf0001000); void __iomem *gic_cpu_base = IOMEM(0xf0000100); void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); - int k, n; gic_init(0, 29, gic_dist_base, gic_cpu_base); gic_arch_extn.irq_set_wake = sh73a0_set_wake; register_intc_controller(&intcs_desc); - register_intc_controller(&intca_irq_pins_desc); register_intc_controller(&intc_pint0_desc); register_intc_controller(&intc_pint1_desc); @@ -438,19 +334,6 @@ void __init sh73a0_init_irq(void) sh73a0_intcs_cascade.dev_id = intevtsa; setup_irq(gic_spi(50), &sh73a0_intcs_cascade); - /* IRQ pins require special handling through INTCA and GIC */ - for (k = 0; k < 32; k++) { - sh73a0_irq_pin_cascade[k].name = "INTCA-GIC cascade"; - sh73a0_irq_pin_cascade[k].handler = sh73a0_irq_pin_demux; - setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); - - n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); - WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); - irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, - handle_level_irq, "level"); - set_irq_flags(n, IRQF_VALID); /* yuck */ - } - /* PINT pins are sanely tied to the GIC as SPI */ sh73a0_pint0_cascade.name = "PINT0 cascade"; sh73a0_pint0_cascade.handler = sh73a0_pint0_demux; diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 2257a915746d..e8cd93a5c550 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -33,6 +33,7 @@ #include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <linux/platform_data/sh_ipmmu.h> +#include <linux/platform_data/irq-renesas-intc-irqpin.h> #include <mach/dma-register.h> #include <mach/hardware.h> #include <mach/irqs.h> @@ -811,6 +812,127 @@ static struct platform_device ipmmu_device = { .num_resources = ARRAY_SIZE(ipmmu_resources), }; +static struct renesas_intc_irqpin_config irqpin0_platform_data = { + .irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */ +}; + +static struct resource irqpin0_resources[] = { + DEFINE_RES_MEM(0xe6900000, 4), /* ICR1A */ + DEFINE_RES_MEM(0xe6900010, 4), /* INTPRI00A */ + DEFINE_RES_MEM(0xe6900020, 1), /* INTREQ00A */ + DEFINE_RES_MEM(0xe6900040, 1), /* INTMSK00A */ + DEFINE_RES_MEM(0xe6900060, 1), /* INTMSKCLR00A */ + DEFINE_RES_IRQ(gic_spi(1)), /* IRQ0 */ + DEFINE_RES_IRQ(gic_spi(2)), /* IRQ1 */ + DEFINE_RES_IRQ(gic_spi(3)), /* IRQ2 */ + DEFINE_RES_IRQ(gic_spi(4)), /* IRQ3 */ + DEFINE_RES_IRQ(gic_spi(5)), /* IRQ4 */ + DEFINE_RES_IRQ(gic_spi(6)), /* IRQ5 */ + DEFINE_RES_IRQ(gic_spi(7)), /* IRQ6 */ + DEFINE_RES_IRQ(gic_spi(8)), /* IRQ7 */ +}; + +static struct platform_device irqpin0_device = { + .name = "renesas_intc_irqpin", + .id = 0, + .resource = irqpin0_resources, + .num_resources = ARRAY_SIZE(irqpin0_resources), + .dev = { + .platform_data = &irqpin0_platform_data, + }, +}; + +static struct renesas_intc_irqpin_config irqpin1_platform_data = { + .irq_base = irq_pin(8), /* IRQ8 -> IRQ15 */ + .control_parent = true, /* Disable spurious IRQ10 */ +}; + +static struct resource irqpin1_resources[] = { + DEFINE_RES_MEM(0xe6900004, 4), /* ICR2A */ + DEFINE_RES_MEM(0xe6900014, 4), /* INTPRI10A */ + DEFINE_RES_MEM(0xe6900024, 1), /* INTREQ10A */ + DEFINE_RES_MEM(0xe6900044, 1), /* INTMSK10A */ + DEFINE_RES_MEM(0xe6900064, 1), /* INTMSKCLR10A */ + DEFINE_RES_IRQ(gic_spi(9)), /* IRQ8 */ + DEFINE_RES_IRQ(gic_spi(10)), /* IRQ9 */ + DEFINE_RES_IRQ(gic_spi(11)), /* IRQ10 */ + DEFINE_RES_IRQ(gic_spi(12)), /* IRQ11 */ + DEFINE_RES_IRQ(gic_spi(13)), /* IRQ12 */ + DEFINE_RES_IRQ(gic_spi(14)), /* IRQ13 */ + DEFINE_RES_IRQ(gic_spi(15)), /* IRQ14 */ + DEFINE_RES_IRQ(gic_spi(16)), /* IRQ15 */ +}; + +static struct platform_device irqpin1_device = { + .name = "renesas_intc_irqpin", + .id = 1, + .resource = irqpin1_resources, + .num_resources = ARRAY_SIZE(irqpin1_resources), + .dev = { + .platform_data = &irqpin1_platform_data, + }, +}; + +static struct renesas_intc_irqpin_config irqpin2_platform_data = { + .irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */ +}; + +static struct resource irqpin2_resources[] = { + DEFINE_RES_MEM(0xe6900008, 4), /* ICR3A */ + DEFINE_RES_MEM(0xe6900018, 4), /* INTPRI20A */ + DEFINE_RES_MEM(0xe6900028, 1), /* INTREQ20A */ + DEFINE_RES_MEM(0xe6900048, 1), /* INTMSK20A */ + DEFINE_RES_MEM(0xe6900068, 1), /* INTMSKCLR20A */ + DEFINE_RES_IRQ(gic_spi(17)), /* IRQ16 */ + DEFINE_RES_IRQ(gic_spi(18)), /* IRQ17 */ + DEFINE_RES_IRQ(gic_spi(19)), /* IRQ18 */ + DEFINE_RES_IRQ(gic_spi(20)), /* IRQ19 */ + DEFINE_RES_IRQ(gic_spi(21)), /* IRQ20 */ + DEFINE_RES_IRQ(gic_spi(22)), /* IRQ21 */ + DEFINE_RES_IRQ(gic_spi(23)), /* IRQ22 */ + DEFINE_RES_IRQ(gic_spi(24)), /* IRQ23 */ +}; + +static struct platform_device irqpin2_device = { + .name = "renesas_intc_irqpin", + .id = 2, + .resource = irqpin2_resources, + .num_resources = ARRAY_SIZE(irqpin2_resources), + .dev = { + .platform_data = &irqpin2_platform_data, + }, +}; + +static struct renesas_intc_irqpin_config irqpin3_platform_data = { + .irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */ +}; + +static struct resource irqpin3_resources[] = { + DEFINE_RES_MEM(0xe690000c, 4), /* ICR4A */ + DEFINE_RES_MEM(0xe690001c, 4), /* INTPRI30A */ + DEFINE_RES_MEM(0xe690002c, 1), /* INTREQ30A */ + DEFINE_RES_MEM(0xe690004c, 1), /* INTMSK30A */ + DEFINE_RES_MEM(0xe690006c, 1), /* INTMSKCLR30A */ + DEFINE_RES_IRQ(gic_spi(25)), /* IRQ24 */ + DEFINE_RES_IRQ(gic_spi(26)), /* IRQ25 */ + DEFINE_RES_IRQ(gic_spi(27)), /* IRQ26 */ + DEFINE_RES_IRQ(gic_spi(28)), /* IRQ27 */ + DEFINE_RES_IRQ(gic_spi(29)), /* IRQ28 */ + DEFINE_RES_IRQ(gic_spi(30)), /* IRQ29 */ + DEFINE_RES_IRQ(gic_spi(31)), /* IRQ30 */ + DEFINE_RES_IRQ(gic_spi(32)), /* IRQ31 */ +}; + +static struct platform_device irqpin3_device = { + .name = "renesas_intc_irqpin", + .id = 3, + .resource = irqpin3_resources, + .num_resources = ARRAY_SIZE(irqpin3_resources), + .dev = { + .platform_data = &irqpin3_platform_data, + }, +}; + static struct platform_device *sh73a0_devices_dt[] __initdata = { &scif0_device, &scif1_device, @@ -839,6 +961,10 @@ static struct platform_device *sh73a0_late_devices[] __initdata = { &dma0_device, &mpdma0_device, &pmu_device, + &irqpin0_device, + &irqpin1_device, + &irqpin2_device, + &irqpin3_device, }; #define SRCR2 IOMEM(0xe61580b0) diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 9cf1ab17afeb..0d1e4128d460 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -34,6 +34,7 @@ #include <linux/slab.h> #include <linux/sys_soc.h> #include <linux/usb/tegra_usb_phy.h> +#include <linux/clk/tegra.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -85,6 +86,8 @@ static void __init tegra_dt_init(void) struct soc_device *soc_dev; struct device *parent = NULL; + tegra_clocks_apply_init_table(); + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); if (!soc_dev_attr) goto out; diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index f3976f9c404a..947bd9eca079 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -46,8 +46,12 @@ BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED| PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE); BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); +BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| + PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED| PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED); BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED| @@ -76,9 +80,6 @@ BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE| PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func) #define DB8500_PIN_HOG(pin,conf) \ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf) -#define DB8500_PIN_SLEEP(pin, conf, dev) \ - PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ - pin, conf) /* These are default states associated with device and changed runtime */ #define DB8500_MUX(group,func,dev) \ @@ -307,8 +308,23 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */ /* Mux in USB pins, drive STP high */ - DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"), - DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */ + /* USB default state */ + DB8500_MUX("usb_a_1", "usb", "ab8500-usb.0"), + DB8500_PIN("GPIO257_AE29", out_hi, "ab8500-usb.0"), /* STP */ + /* USB sleep state */ + DB8500_PIN_SLEEP("GPIO256_AF28", slpm_wkup_pdis_en, "ab8500-usb.0"), /* NXT */ + DB8500_PIN_SLEEP("GPIO257_AE29", slpm_out_hi_wkup_pdis, "ab8500-usb.0"), /* STP */ + DB8500_PIN_SLEEP("GPIO258_AD29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* XCLK */ + DB8500_PIN_SLEEP("GPIO259_AC29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* DIR */ + DB8500_PIN_SLEEP("GPIO260_AD28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT7 */ + DB8500_PIN_SLEEP("GPIO261_AD26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT6 */ + DB8500_PIN_SLEEP("GPIO262_AE26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT5 */ + DB8500_PIN_SLEEP("GPIO263_AG29", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT4 */ + DB8500_PIN_SLEEP("GPIO264_AE27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT3 */ + DB8500_PIN_SLEEP("GPIO265_AD27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT2 */ + DB8500_PIN_SLEEP("GPIO266_AC28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT1 */ + DB8500_PIN_SLEEP("GPIO267_AC27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT0 */ + /* Mux in SPI2 pins on the "other C1" altfunction */ DB8500_MUX("spi2_oc1_2", "spi2", "spi2"), DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */ @@ -316,9 +332,9 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = { DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */ DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */ /* SPI2 idle state */ - DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ - DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ - DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ + DB8500_PIN_IDLE("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ + DB8500_PIN_IDLE("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ + DB8500_PIN_IDLE("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ /* SPI2 sleep state */ DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */ DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ @@ -745,6 +761,8 @@ static struct pinctrl_map __initdata snowball_pinmap[] = { DB8500_PIN_HOG("GPIO21_AB3", out_hi), /* Mux in "SM" which is used for the SMSC911x Ethernet adapter */ DB8500_MUX_HOG("sm_b_1", "sm"), + /* User LED */ + DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi), /* Drive RSTn_LAN high */ DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi), /* Accelerometer/Magnetometer */ diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index e3e94b2fa145..9b252934b206 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -7,6 +7,7 @@ config ARCH_VT8500 select GENERIC_CLOCKEVENTS select HAVE_CLK select VT8500_TIMER + select PINCTRL help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile index 92ceb2436b60..4c8a84637594 100644 --- a/arch/arm/mach-vt8500/Makefile +++ b/arch/arm/mach-vt8500/Makefile @@ -1 +1 @@ -obj-$(CONFIG_ARCH_VT8500) += irq.o vt8500.o +obj-$(CONFIG_ARCH_VT8500) += vt8500.o diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h index 77611a6968d6..087787af62f1 100644 --- a/arch/arm/mach-vt8500/common.h +++ b/arch/arm/mach-vt8500/common.h @@ -18,13 +18,7 @@ #include <linux/of.h> -int __init vt8500_irq_init(struct device_node *node, - struct device_node *parent); - /* defined in drivers/clk/clk-vt8500.c */ void __init vtwm_clk_init(void __iomem *pmc_base); -/* defined in irq.c */ -asmlinkage void vt8500_handle_irq(struct pt_regs *regs); - #endif diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 49e80053d828..1dd281efc020 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -20,6 +20,7 @@ #include <linux/clocksource.h> #include <linux/io.h> +#include <linux/irqchip.h> #include <linux/pm.h> #include <asm/mach-types.h> @@ -166,16 +167,6 @@ void __init vt8500_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const struct of_device_id vt8500_irq_match[] __initconst = { - { .compatible = "via,vt8500-intc", .data = vt8500_irq_init, }, - { /* sentinel */ }, -}; - -static void __init vt8500_init_irq(void) -{ - of_irq_init(vt8500_irq_match); -}; - static const char * const vt8500_dt_compat[] = { "via,vt8500", "wm,wm8650", @@ -187,10 +178,9 @@ static const char * const vt8500_dt_compat[] = { DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") .dt_compat = vt8500_dt_compat, .map_io = vt8500_map_io, - .init_irq = vt8500_init_irq, + .init_irq = irqchip_init, .init_machine = vt8500_init, .init_time = clocksource_of_init, .restart = vt8500_restart, - .handle_irq = vt8500_handle_irq, MACHINE_END diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 138b5891f4ef..cf3226b041f5 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -11,5 +11,6 @@ config ARCH_ZYNQ select MIGHT_HAVE_CACHE_L2X0 select USE_OF select SPARSE_IRQ + select CADENCE_TTC_TIMER help Support for Xilinx Zynq ARM Cortex A9 Platform diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile index 397268c1b250..320faedeb484 100644 --- a/arch/arm/mach-zynq/Makefile +++ b/arch/arm/mach-zynq/Makefile @@ -3,4 +3,4 @@ # # Common support -obj-y := common.o timer.o +obj-y := common.o diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 5c8983218183..68e0907de5d0 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/clk/zynq.h> +#include <linux/clocksource.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> @@ -77,7 +78,7 @@ static void __init xilinx_zynq_timer_init(void) xilinx_zynq_clocks_init(slcr); - xttcps_timer_init(); + clocksource_of_init(); } /** diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index 8b4dbbaa01cf..5050bb10bb12 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -17,6 +17,4 @@ #ifndef __MACH_ZYNQ_COMMON_H__ #define __MACH_ZYNQ_COMMON_H__ -void __init xttcps_timer_init(void); - #endif diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c deleted file mode 100644 index f9fbc9c1e7a6..000000000000 --- a/arch/arm/mach-zynq/timer.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * This file contains driver for the Xilinx PS Timer Counter IP. - * - * Copyright (C) 2011 Xilinx - * - * based on arch/mips/kernel/time.c timer driver - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/interrupt.h> -#include <linux/clockchips.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/slab.h> -#include <linux/clk-provider.h> -#include "common.h" - -/* - * Timer Register Offset Definitions of Timer 1, Increment base address by 4 - * and use same offsets for Timer 2 - */ -#define XTTCPS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */ -#define XTTCPS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */ -#define XTTCPS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */ -#define XTTCPS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */ -#define XTTCPS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */ -#define XTTCPS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */ - -#define XTTCPS_CNT_CNTRL_DISABLE_MASK 0x1 - -/* - * Setup the timers to use pre-scaling, using a fixed value for now that will - * work across most input frequency, but it may need to be more dynamic - */ -#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */ -#define PRESCALE 2048 /* The exponent must match this */ -#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1) -#define CLK_CNTRL_PRESCALE_EN 1 -#define CNT_CNTRL_RESET (1<<4) - -/** - * struct xttcps_timer - This definition defines local timer structure - * - * @base_addr: Base address of timer - **/ -struct xttcps_timer { - void __iomem *base_addr; -}; - -struct xttcps_timer_clocksource { - struct xttcps_timer xttc; - struct clocksource cs; -}; - -#define to_xttcps_timer_clksrc(x) \ - container_of(x, struct xttcps_timer_clocksource, cs) - -struct xttcps_timer_clockevent { - struct xttcps_timer xttc; - struct clock_event_device ce; - struct clk *clk; -}; - -#define to_xttcps_timer_clkevent(x) \ - container_of(x, struct xttcps_timer_clockevent, ce) - -/** - * xttcps_set_interval - Set the timer interval value - * - * @timer: Pointer to the timer instance - * @cycles: Timer interval ticks - **/ -static void xttcps_set_interval(struct xttcps_timer *timer, - unsigned long cycles) -{ - u32 ctrl_reg; - - /* Disable the counter, set the counter value and re-enable counter */ - ctrl_reg = __raw_readl(timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - - __raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET); - - /* - * Reset the counter (0x10) so that it starts from 0, one-shot - * mode makes this needed for timing to be right. - */ - ctrl_reg |= CNT_CNTRL_RESET; - ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); -} - -/** - * xttcps_clock_event_interrupt - Clock event timer interrupt handler - * - * @irq: IRQ number of the Timer - * @dev_id: void pointer to the xttcps_timer instance - * - * returns: Always IRQ_HANDLED - success - **/ -static irqreturn_t xttcps_clock_event_interrupt(int irq, void *dev_id) -{ - struct xttcps_timer_clockevent *xttce = dev_id; - struct xttcps_timer *timer = &xttce->xttc; - - /* Acknowledge the interrupt and call event handler */ - __raw_readl(timer->base_addr + XTTCPS_ISR_OFFSET); - - xttce->ce.event_handler(&xttce->ce); - - return IRQ_HANDLED; -} - -/** - * __xttc_clocksource_read - Reads the timer counter register - * - * returns: Current timer counter register value - **/ -static cycle_t __xttc_clocksource_read(struct clocksource *cs) -{ - struct xttcps_timer *timer = &to_xttcps_timer_clksrc(cs)->xttc; - - return (cycle_t)__raw_readl(timer->base_addr + - XTTCPS_COUNT_VAL_OFFSET); -} - -/** - * xttcps_set_next_event - Sets the time interval for next event - * - * @cycles: Timer interval ticks - * @evt: Address of clock event instance - * - * returns: Always 0 - success - **/ -static int xttcps_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt); - struct xttcps_timer *timer = &xttce->xttc; - - xttcps_set_interval(timer, cycles); - return 0; -} - -/** - * xttcps_set_mode - Sets the mode of timer - * - * @mode: Mode to be set - * @evt: Address of clock event instance - **/ -static void xttcps_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt); - struct xttcps_timer *timer = &xttce->xttc; - u32 ctrl_reg; - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - xttcps_set_interval(timer, - DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk), - PRESCALE * HZ)); - break; - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - ctrl_reg = __raw_readl(timer->base_addr + - XTTCPS_CNT_CNTRL_OFFSET); - ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, - timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - break; - case CLOCK_EVT_MODE_RESUME: - ctrl_reg = __raw_readl(timer->base_addr + - XTTCPS_CNT_CNTRL_OFFSET); - ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK; - __raw_writel(ctrl_reg, - timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); - break; - } -} - -static void __init zynq_ttc_setup_clocksource(struct device_node *np, - void __iomem *base) -{ - struct xttcps_timer_clocksource *ttccs; - struct clk *clk; - int err; - u32 reg; - - ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL); - if (WARN_ON(!ttccs)) - return; - - err = of_property_read_u32(np, "reg", ®); - if (WARN_ON(err)) - return; - - clk = of_clk_get_by_name(np, "cpu_1x"); - if (WARN_ON(IS_ERR(clk))) - return; - - err = clk_prepare_enable(clk); - if (WARN_ON(err)) - return; - - ttccs->xttc.base_addr = base + reg * 4; - - ttccs->cs.name = np->name; - ttccs->cs.rating = 200; - ttccs->cs.read = __xttc_clocksource_read; - ttccs->cs.mask = CLOCKSOURCE_MASK(16); - ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS; - - __raw_writel(0x0, ttccs->xttc.base_addr + XTTCPS_IER_OFFSET); - __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, - ttccs->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET); - __raw_writel(CNT_CNTRL_RESET, - ttccs->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET); - - err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE); - if (WARN_ON(err)) - return; -} - -static void __init zynq_ttc_setup_clockevent(struct device_node *np, - void __iomem *base) -{ - struct xttcps_timer_clockevent *ttcce; - int err, irq; - u32 reg; - - ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL); - if (WARN_ON(!ttcce)) - return; - - err = of_property_read_u32(np, "reg", ®); - if (WARN_ON(err)) - return; - - ttcce->xttc.base_addr = base + reg * 4; - - ttcce->clk = of_clk_get_by_name(np, "cpu_1x"); - if (WARN_ON(IS_ERR(ttcce->clk))) - return; - - err = clk_prepare_enable(ttcce->clk); - if (WARN_ON(err)) - return; - - irq = irq_of_parse_and_map(np, 0); - if (WARN_ON(!irq)) - return; - - ttcce->ce.name = np->name; - ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; - ttcce->ce.set_next_event = xttcps_set_next_event; - ttcce->ce.set_mode = xttcps_set_mode; - ttcce->ce.rating = 200; - ttcce->ce.irq = irq; - ttcce->ce.cpumask = cpu_possible_mask; - - __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET); - __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, - ttcce->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET); - __raw_writel(0x1, ttcce->xttc.base_addr + XTTCPS_IER_OFFSET); - - err = request_irq(irq, xttcps_clock_event_interrupt, IRQF_TIMER, - np->name, ttcce); - if (WARN_ON(err)) - return; - - clockevents_config_and_register(&ttcce->ce, - clk_get_rate(ttcce->clk) / PRESCALE, - 1, 0xfffe); -} - -static const __initconst struct of_device_id zynq_ttc_match[] = { - { .compatible = "xlnx,ttc-counter-clocksource", - .data = zynq_ttc_setup_clocksource, }, - { .compatible = "xlnx,ttc-counter-clockevent", - .data = zynq_ttc_setup_clockevent, }, - {} -}; - -/** - * xttcps_timer_init - Initialize the timer - * - * Initializes the timer hardware and register the clock source and clock event - * timers with Linux kernal timer framework - **/ -void __init xttcps_timer_init(void) -{ - struct device_node *np; - - for_each_compatible_node(np, NULL, "xlnx,ttc") { - struct device_node *np_chld; - void __iomem *base; - - base = of_iomap(np, 0); - if (WARN_ON(!base)) - return; - - for_each_available_child_of_node(np, np_chld) { - int (*cb)(struct device_node *np, void __iomem *base); - const struct of_device_id *match; - - match = of_match_node(zynq_ttc_match, np_chld); - if (match) { - cb = match->data; - cb(np_chld, base); - } - } - } -} diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 91c2d72e689b..54d186106f9f 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -25,7 +25,7 @@ config PLAT_S5P select PLAT_SAMSUNG select S3C_GPIO_TRACK select S5P_GPIO_DRVSTR - select SAMSUNG_CLKSRC + select SAMSUNG_CLKSRC if !COMMON_CLK select SAMSUNG_GPIOLIB_4BIT select SAMSUNG_IRQ_VIC_TIMER help @@ -62,7 +62,7 @@ config S3C_LOWLEVEL_UART_PORT # timer options -config S5P_HRT +config SAMSUNG_HRT bool select SAMSUNG_DEV_PWM help @@ -81,7 +81,7 @@ config SAMSUNG_CLKSRC used by newer systems such as the S3C64XX. config S5P_CLOCK - def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) + def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) help Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 3a7c64d1814a..a23c460299a1 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -12,8 +12,7 @@ obj- := # Objects we always build independent of SoC choice obj-y += init.o cpu.o -obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o -obj-$(CONFIG_S5P_HRT) += s5p-time.o +obj-$(CONFIG_SAMSUNG_HRT) += samsung-time.o obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o obj-$(CONFIG_SAMSUNG_CLOCK) += pwm-clock.o diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 33ad3f32c2b9..30c2fe243f76 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1074,7 +1074,7 @@ struct platform_device s5p_device_onenand = { /* PMU */ -#ifdef CONFIG_PLAT_S5P +#if defined(CONFIG_PLAT_S5P) && !defined(CONFIG_ARCH_EXYNOS) static struct resource s5p_pmu_resource[] = { DEFINE_RES_IRQ(IRQ_PMU) }; diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 37703ef6dfc7..989fefe18be6 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -23,6 +23,9 @@ extern unsigned long samsung_cpu_id; #define S3C24XX_CPU_ID 0x32400000 #define S3C24XX_CPU_MASK 0xFFF00000 +#define S3C2412_CPU_ID 0x32412000 +#define S3C2412_CPU_MASK 0xFFFFF000 + #define S3C6400_CPU_ID 0x36400000 #define S3C6410_CPU_ID 0x36410000 #define S3C64XX_CPU_MASK 0xFFFFF000 @@ -53,6 +56,7 @@ static inline int is_samsung_##name(void) \ } IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK) +IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK) IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK) IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK) IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK) @@ -74,6 +78,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_s3c24xx() 0 #endif +#if defined(CONFIG_CPU_S3C2412) +# define soc_is_s3c2412() is_samsung_s3c2412() +#else +# define soc_is_s3c2412() 0 +#endif + #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) # define soc_is_s3c64xx() (is_samsung_s3c6400() || is_samsung_s3c6410()) #else @@ -173,7 +183,6 @@ extern void s3c_init_cpu(unsigned long idcode, /* core initialisation functions */ -extern void s3c24xx_init_irq(void); extern void s5p_init_irq(u32 *vic, u32 num_vic); extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); @@ -192,10 +201,6 @@ extern void s3c24xx_init_uartdevs(char *name, struct s3c24xx_uart_resources *res, struct s3c2410_uartcfg *cfg, int no); -/* timer for 2410/2440 */ - -extern void s3c24xx_timer_init(void); - extern struct syscore_ops s3c2410_pm_syscore_ops; extern struct syscore_ops s3c2412_pm_syscore_ops; extern struct syscore_ops s3c2416_pm_syscore_ops; diff --git a/arch/arm/plat-samsung/include/plat/s5p-time.h b/arch/arm/plat-samsung/include/plat/s5p-time.h deleted file mode 100644 index 9c96f3586ce0..000000000000 --- a/arch/arm/plat-samsung/include/plat/s5p-time.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h - * - * Copyright 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5p time support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_TIME_H -#define __ASM_PLAT_S5P_TIME_H __FILE__ - -/* S5P HR-Timer Clock mode */ -enum s5p_timer_mode { - S5P_PWM0, - S5P_PWM1, - S5P_PWM2, - S5P_PWM3, - S5P_PWM4, -}; - -struct s5p_timer_source { - unsigned int event_id; - unsigned int source_id; -}; - -/* Be able to sleep for atleast 4 seconds (usually more) */ -#define S5PTIMER_MIN_RANGE 4 - -#define TCNT_MAX 0xffffffff -#define NON_PERIODIC 0 -#define PERIODIC 1 - -extern void __init s5p_set_timer_source(enum s5p_timer_mode event, - enum s5p_timer_mode source); -extern void s5p_timer_init(void); -#endif /* __ASM_PLAT_S5P_TIME_H */ diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h b/arch/arm/plat-samsung/include/plat/samsung-time.h new file mode 100644 index 000000000000..4cc99bb1f176 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/samsung-time.h @@ -0,0 +1,53 @@ +/* linux/arch/arm/plat-samsung/include/plat/samsung-time.h + * + * Copyright 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for samsung s3c and s5p time support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_SAMSUNG_TIME_H +#define __ASM_PLAT_SAMSUNG_TIME_H __FILE__ + +/* SAMSUNG HR-Timer Clock mode */ +enum samsung_timer_mode { + SAMSUNG_PWM0, + SAMSUNG_PWM1, + SAMSUNG_PWM2, + SAMSUNG_PWM3, + SAMSUNG_PWM4, +}; + +struct samsung_timer_source { + unsigned int event_id; + unsigned int source_id; +}; + +/* Be able to sleep for atleast 4 seconds (usually more) */ +#define SAMSUNG_TIMER_MIN_RANGE 4 + +#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S5PC100) +#define TCNT_MAX 0xffff +#define TSCALER_DIV 25 +#define TDIV 50 +#define TSIZE 16 +#else +#define TCNT_MAX 0xffffffff +#define TSCALER_DIV 2 +#define TDIV 2 +#define TSIZE 32 +#endif + +#define NON_PERIODIC 0 +#define PERIODIC 1 + +extern void __init samsung_set_timer_source(enum samsung_timer_mode event, + enum samsung_timer_mode source); + +extern void __init samsung_timer_init(void); + +#endif /* __ASM_PLAT_SAMSUNG_TIME_H */ diff --git a/arch/arm/plat-samsung/s5p-time.c b/arch/arm/plat-samsung/samsung-time.c index e92510cf82ee..f899cbc9b288 100644 --- a/arch/arm/plat-samsung/s5p-time.c +++ b/arch/arm/plat-samsung/samsung-time.c @@ -2,7 +2,7 @@ * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * - * S5P - Common hr-timer support + * samsung - Common hr-timer support (s3c and s5p) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -25,41 +25,41 @@ #include <mach/map.h> #include <plat/devs.h> #include <plat/regs-timer.h> -#include <plat/s5p-time.h> +#include <plat/samsung-time.h> static struct clk *tin_event; static struct clk *tin_source; static struct clk *tdiv_event; static struct clk *tdiv_source; static struct clk *timerclk; -static struct s5p_timer_source timer_source; +static struct samsung_timer_source timer_source; static unsigned long clock_count_per_tick; -static void s5p_timer_resume(void); +static void samsung_timer_resume(void); -static void s5p_time_stop(enum s5p_timer_mode mode) +static void samsung_time_stop(enum samsung_timer_mode mode) { unsigned long tcon; tcon = __raw_readl(S3C2410_TCON); switch (mode) { - case S5P_PWM0: + case SAMSUNG_PWM0: tcon &= ~S3C2410_TCON_T0START; break; - case S5P_PWM1: + case SAMSUNG_PWM1: tcon &= ~S3C2410_TCON_T1START; break; - case S5P_PWM2: + case SAMSUNG_PWM2: tcon &= ~S3C2410_TCON_T2START; break; - case S5P_PWM3: + case SAMSUNG_PWM3: tcon &= ~S3C2410_TCON_T3START; break; - case S5P_PWM4: + case SAMSUNG_PWM4: tcon &= ~S3C2410_TCON_T4START; break; @@ -70,7 +70,7 @@ static void s5p_time_stop(enum s5p_timer_mode mode) __raw_writel(tcon, S3C2410_TCON); } -static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt) +static void samsung_time_setup(enum samsung_timer_mode mode, unsigned long tcnt) { unsigned long tcon; @@ -79,27 +79,27 @@ static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt) tcnt--; switch (mode) { - case S5P_PWM0: + case SAMSUNG_PWM0: tcon &= ~(0x0f << 0); tcon |= S3C2410_TCON_T0MANUALUPD; break; - case S5P_PWM1: + case SAMSUNG_PWM1: tcon &= ~(0x0f << 8); tcon |= S3C2410_TCON_T1MANUALUPD; break; - case S5P_PWM2: + case SAMSUNG_PWM2: tcon &= ~(0x0f << 12); tcon |= S3C2410_TCON_T2MANUALUPD; break; - case S5P_PWM3: + case SAMSUNG_PWM3: tcon &= ~(0x0f << 16); tcon |= S3C2410_TCON_T3MANUALUPD; break; - case S5P_PWM4: + case SAMSUNG_PWM4: tcon &= ~(0x07 << 20); tcon |= S3C2410_TCON_T4MANUALUPD; break; @@ -114,14 +114,14 @@ static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt) __raw_writel(tcon, S3C2410_TCON); } -static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) +static void samsung_time_start(enum samsung_timer_mode mode, bool periodic) { unsigned long tcon; tcon = __raw_readl(S3C2410_TCON); switch (mode) { - case S5P_PWM0: + case SAMSUNG_PWM0: tcon |= S3C2410_TCON_T0START; tcon &= ~S3C2410_TCON_T0MANUALUPD; @@ -131,7 +131,7 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) tcon &= ~S3C2410_TCON_T0RELOAD; break; - case S5P_PWM1: + case SAMSUNG_PWM1: tcon |= S3C2410_TCON_T1START; tcon &= ~S3C2410_TCON_T1MANUALUPD; @@ -141,7 +141,7 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) tcon &= ~S3C2410_TCON_T1RELOAD; break; - case S5P_PWM2: + case SAMSUNG_PWM2: tcon |= S3C2410_TCON_T2START; tcon &= ~S3C2410_TCON_T2MANUALUPD; @@ -151,7 +151,7 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) tcon &= ~S3C2410_TCON_T2RELOAD; break; - case S5P_PWM3: + case SAMSUNG_PWM3: tcon |= S3C2410_TCON_T3START; tcon &= ~S3C2410_TCON_T3MANUALUPD; @@ -161,7 +161,7 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) tcon &= ~S3C2410_TCON_T3RELOAD; break; - case S5P_PWM4: + case SAMSUNG_PWM4: tcon |= S3C2410_TCON_T4START; tcon &= ~S3C2410_TCON_T4MANUALUPD; @@ -178,24 +178,24 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) __raw_writel(tcon, S3C2410_TCON); } -static int s5p_set_next_event(unsigned long cycles, +static int samsung_set_next_event(unsigned long cycles, struct clock_event_device *evt) { - s5p_time_setup(timer_source.event_id, cycles); - s5p_time_start(timer_source.event_id, NON_PERIODIC); + samsung_time_setup(timer_source.event_id, cycles); + samsung_time_start(timer_source.event_id, NON_PERIODIC); return 0; } -static void s5p_set_mode(enum clock_event_mode mode, +static void samsung_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - s5p_time_stop(timer_source.event_id); + samsung_time_stop(timer_source.event_id); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - s5p_time_setup(timer_source.event_id, clock_count_per_tick); - s5p_time_start(timer_source.event_id, PERIODIC); + samsung_time_setup(timer_source.event_id, clock_count_per_tick); + samsung_time_start(timer_source.event_id, PERIODIC); break; case CLOCK_EVT_MODE_ONESHOT: @@ -206,24 +206,24 @@ static void s5p_set_mode(enum clock_event_mode mode, break; case CLOCK_EVT_MODE_RESUME: - s5p_timer_resume(); + samsung_timer_resume(); break; } } -static void s5p_timer_resume(void) +static void samsung_timer_resume(void) { /* event timer restart */ - s5p_time_setup(timer_source.event_id, clock_count_per_tick); - s5p_time_start(timer_source.event_id, PERIODIC); + samsung_time_setup(timer_source.event_id, clock_count_per_tick); + samsung_time_start(timer_source.event_id, PERIODIC); /* source timer restart */ - s5p_time_setup(timer_source.source_id, TCNT_MAX); - s5p_time_start(timer_source.source_id, PERIODIC); + samsung_time_setup(timer_source.source_id, TCNT_MAX); + samsung_time_start(timer_source.source_id, PERIODIC); } -void __init s5p_set_timer_source(enum s5p_timer_mode event, - enum s5p_timer_mode source) +void __init samsung_set_timer_source(enum samsung_timer_mode event, + enum samsung_timer_mode source) { s3c_device_timer[event].dev.bus = &platform_bus_type; s3c_device_timer[source].dev.bus = &platform_bus_type; @@ -233,14 +233,14 @@ void __init s5p_set_timer_source(enum s5p_timer_mode event, } static struct clock_event_device time_event_device = { - .name = "s5p_event_timer", + .name = "samsung_event_timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .rating = 200, - .set_next_event = s5p_set_next_event, - .set_mode = s5p_set_mode, + .set_next_event = samsung_set_next_event, + .set_mode = samsung_set_mode, }; -static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id) +static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id) { struct clock_event_device *evt = dev_id; @@ -249,14 +249,14 @@ static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction s5p_clock_event_irq = { - .name = "s5p_time_irq", +static struct irqaction samsung_clock_event_irq = { + .name = "samsung_time_irq", .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = s5p_clock_event_isr, + .handler = samsung_clock_event_isr, .dev_id = &time_event_device, }; -static void __init s5p_clockevent_init(void) +static void __init samsung_clockevent_init(void) { unsigned long pclk; unsigned long clock_rate; @@ -267,8 +267,8 @@ static void __init s5p_clockevent_init(void) tscaler = clk_get_parent(tdiv_event); - clk_set_rate(tscaler, pclk / 2); - clk_set_rate(tdiv_event, pclk / 2); + clk_set_rate(tscaler, pclk / TSCALER_DIV); + clk_set_rate(tdiv_event, pclk / TDIV); clk_set_parent(tin_event, tdiv_event); clock_rate = clk_get_rate(tin_event); @@ -278,22 +278,22 @@ static void __init s5p_clockevent_init(void) clockevents_config_and_register(&time_event_device, clock_rate, 1, -1); irq_number = timer_source.event_id + IRQ_TIMER0; - setup_irq(irq_number, &s5p_clock_event_irq); + setup_irq(irq_number, &samsung_clock_event_irq); } -static void __iomem *s5p_timer_reg(void) +static void __iomem *samsung_timer_reg(void) { unsigned long offset = 0; switch (timer_source.source_id) { - case S5P_PWM0: - case S5P_PWM1: - case S5P_PWM2: - case S5P_PWM3: + case SAMSUNG_PWM0: + case SAMSUNG_PWM1: + case SAMSUNG_PWM2: + case SAMSUNG_PWM3: offset = (timer_source.source_id * 0x0c) + 0x14; break; - case S5P_PWM4: + case SAMSUNG_PWM4: offset = 0x40; break; @@ -312,9 +312,9 @@ static void __iomem *s5p_timer_reg(void) * this wraps around for now, since it is just a relative time * stamp. (Inspired by U300 implementation.) */ -static u32 notrace s5p_read_sched_clock(void) +static u32 notrace samsung_read_sched_clock(void) { - void __iomem *reg = s5p_timer_reg(); + void __iomem *reg = samsung_timer_reg(); if (!reg) return 0; @@ -322,29 +322,29 @@ static u32 notrace s5p_read_sched_clock(void) return ~__raw_readl(reg); } -static void __init s5p_clocksource_init(void) +static void __init samsung_clocksource_init(void) { unsigned long pclk; unsigned long clock_rate; pclk = clk_get_rate(timerclk); - clk_set_rate(tdiv_source, pclk / 2); + clk_set_rate(tdiv_source, pclk / TDIV); clk_set_parent(tin_source, tdiv_source); clock_rate = clk_get_rate(tin_source); - s5p_time_setup(timer_source.source_id, TCNT_MAX); - s5p_time_start(timer_source.source_id, PERIODIC); + samsung_time_setup(timer_source.source_id, TCNT_MAX); + samsung_time_start(timer_source.source_id, PERIODIC); - setup_sched_clock(s5p_read_sched_clock, 32, clock_rate); + setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate); - if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer", - clock_rate, 250, 32, clocksource_mmio_readl_down)) - panic("s5p_clocksource_timer: can't register clocksource\n"); + if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer", + clock_rate, 250, TSIZE, clocksource_mmio_readl_down)) + panic("samsung_clocksource_timer: can't register clocksource\n"); } -static void __init s5p_timer_resources(void) +static void __init samsung_timer_resources(void) { unsigned long event_id = timer_source.event_id; @@ -386,9 +386,9 @@ static void __init s5p_timer_resources(void) clk_enable(tin_source); } -void __init s5p_timer_init(void) +void __init samsung_timer_init(void) { - s5p_timer_resources(); - s5p_clockevent_init(); - s5p_clocksource_init(); + samsung_timer_resources(); + samsung_clockevent_init(); + samsung_clocksource_init(); } diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c deleted file mode 100644 index 73defd00c3e4..000000000000 --- a/arch/arm/plat-samsung/time.c +++ /dev/null @@ -1,287 +0,0 @@ -/* linux/arch/arm/plat-samsung/time.c - * - * Copyright (C) 2003-2005 Simtec Electronics - * Ben Dooks, <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/syscore_ops.h> - -#include <asm/mach-types.h> - -#include <asm/irq.h> -#include <mach/map.h> -#include <plat/regs-timer.h> -#include <mach/regs-irq.h> -#include <asm/mach/time.h> -#include <mach/tick.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -static unsigned long timer_startval; -static unsigned long timer_usec_ticks; - -#ifndef TICK_MAX -#define TICK_MAX (0xffff) -#endif - -#define TIMER_USEC_SHIFT 16 - -/* we use the shifted arithmetic to work out the ratio of timer ticks - * to usecs, as often the peripheral clock is not a nice even multiple - * of 1MHz. - * - * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok - * for the current HZ value of 200 without producing overflows. - * - * Original patch by Dimitry Andric, updated by Ben Dooks -*/ - - -/* timer_mask_usec_ticks - * - * given a clock and divisor, make the value to pass into timer_ticks_to_usec - * to scale the ticks into usecs -*/ - -static inline unsigned long -timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk) -{ - unsigned long den = pclk / 1000; - - return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den; -} - -/* timer_ticks_to_usec - * - * convert timer ticks to usec. -*/ - -static inline unsigned long timer_ticks_to_usec(unsigned long ticks) -{ - unsigned long res; - - res = ticks * timer_usec_ticks; - res += 1 << (TIMER_USEC_SHIFT - 4); /* round up slightly */ - - return res >> TIMER_USEC_SHIFT; -} - -/*** - * Returns microsecond since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - * IRQs are disabled before entering here from do_gettimeofday() - */ - -static u32 s3c2410_gettimeoffset(void) -{ - unsigned long tdone; - unsigned long tval; - - /* work out how many ticks have gone since last timer interrupt */ - - tval = __raw_readl(S3C2410_TCNTO(4)); - tdone = timer_startval - tval; - - /* check to see if there is an interrupt pending */ - - if (s3c24xx_ostimer_pending()) { - /* re-read the timer, and try and fix up for the missed - * interrupt. Note, the interrupt may go off before the - * timer has re-loaded from wrapping. - */ - - tval = __raw_readl(S3C2410_TCNTO(4)); - tdone = timer_startval - tval; - - if (tval != 0) - tdone += timer_startval; - } - - return timer_ticks_to_usec(tdone) * 1000; -} - - -/* - * IRQ handler for the timer - */ -static irqreturn_t -s3c2410_timer_interrupt(int irq, void *dev_id) -{ - timer_tick(); - return IRQ_HANDLED; -} - -static struct irqaction s3c2410_timer_irq = { - .name = "S3C2410 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = s3c2410_timer_interrupt, -}; - -#define use_tclk1_12() ( \ - machine_is_bast() || \ - machine_is_vr1000() || \ - machine_is_anubis() || \ - machine_is_osiris()) - -static struct clk *tin; -static struct clk *tdiv; -static struct clk *timerclk; - -/* - * Set up timer interrupt, and return the current time in seconds. - * - * Currently we only use timer4, as it is the only timer which has no - * other function that can be exploited externally - */ -static void s3c2410_timer_setup (void) -{ - unsigned long tcon; - unsigned long tcnt; - unsigned long tcfg1; - unsigned long tcfg0; - - tcnt = TICK_MAX; /* default value for tcnt */ - - /* configure the system for whichever machine is in use */ - - if (use_tclk1_12()) { - /* timer is at 12MHz, scaler is 1 */ - timer_usec_ticks = timer_mask_usec_ticks(1, 12000000); - tcnt = 12000000 / HZ; - - tcfg1 = __raw_readl(S3C2410_TCFG1); - tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK; - tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1; - __raw_writel(tcfg1, S3C2410_TCFG1); - } else { - unsigned long pclk; - struct clk *tscaler; - - /* for the h1940 (and others), we use the pclk from the core - * to generate the timer values. since values around 50 to - * 70MHz are not values we can directly generate the timer - * value from, we need to pre-scale and divide before using it. - * - * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz - * (8.45 ticks per usec) - */ - - pclk = clk_get_rate(timerclk); - - /* configure clock tick */ - - timer_usec_ticks = timer_mask_usec_ticks(6, pclk); - - tscaler = clk_get_parent(tdiv); - - clk_set_rate(tscaler, pclk / 3); - clk_set_rate(tdiv, pclk / 6); - clk_set_parent(tin, tdiv); - - tcnt = clk_get_rate(tin) / HZ; - } - - tcon = __raw_readl(S3C2410_TCON); - tcfg0 = __raw_readl(S3C2410_TCFG0); - tcfg1 = __raw_readl(S3C2410_TCFG1); - - /* timers reload after counting zero, so reduce the count by 1 */ - - tcnt--; - - printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n", - tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks); - - /* check to see if timer is within 16bit range... */ - if (tcnt > TICK_MAX) { - panic("setup_timer: HZ is too small, cannot configure timer!"); - return; - } - - __raw_writel(tcfg1, S3C2410_TCFG1); - __raw_writel(tcfg0, S3C2410_TCFG0); - - timer_startval = tcnt; - __raw_writel(tcnt, S3C2410_TCNTB(4)); - - /* ensure timer is stopped... */ - - tcon &= ~(7<<20); - tcon |= S3C2410_TCON_T4RELOAD; - tcon |= S3C2410_TCON_T4MANUALUPD; - - __raw_writel(tcon, S3C2410_TCON); - __raw_writel(tcnt, S3C2410_TCNTB(4)); - __raw_writel(tcnt, S3C2410_TCMPB(4)); - - /* start the timer running */ - tcon |= S3C2410_TCON_T4START; - tcon &= ~S3C2410_TCON_T4MANUALUPD; - __raw_writel(tcon, S3C2410_TCON); -} - -static void __init s3c2410_timer_resources(void) -{ - struct platform_device tmpdev; - - tmpdev.dev.bus = &platform_bus_type; - tmpdev.id = 4; - - timerclk = clk_get(NULL, "timers"); - if (IS_ERR(timerclk)) - panic("failed to get clock for system timer"); - - clk_enable(timerclk); - - if (!use_tclk1_12()) { - tmpdev.id = 4; - tmpdev.dev.init_name = "s3c24xx-pwm.4"; - tin = clk_get(&tmpdev.dev, "pwm-tin"); - if (IS_ERR(tin)) - panic("failed to get pwm-tin clock for system timer"); - - tdiv = clk_get(&tmpdev.dev, "pwm-tdiv"); - if (IS_ERR(tdiv)) - panic("failed to get pwm-tdiv clock for system timer"); - } - - clk_enable(tin); -} - -static struct syscore_ops s3c24xx_syscore_ops = { - .resume = s3c2410_timer_setup, -}; - -void __init s3c24xx_timer_init(void) -{ - arch_gettimeoffset = s3c2410_gettimeoffset; - - s3c2410_timer_resources(); - s3c2410_timer_setup(); - setup_irq(IRQ_TIMER4, &s3c2410_timer_irq); - register_syscore_ops(&s3c24xx_syscore_ops); -} diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index b323d8d3185b..7c2f6685bf43 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1453,7 +1453,7 @@ static struct resource atmel_lcdfb0_resource[] = { }, }; DEFINE_DEV_DATA(atmel_lcdfb, 0); -DEV_CLK(hck1, atmel_lcdfb0, hsb, 7); +DEV_CLK(hclk, atmel_lcdfb0, hsb, 7); static struct clk atmel_lcdfb0_pixclk = { .name = "lcdc_clk", .dev = &atmel_lcdfb0_device.dev, @@ -1530,6 +1530,8 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, memcpy(info, data, sizeof(struct atmel_lcdfb_info)); info->default_monspecs = monspecs; + pdev->name = "at32ap-lcdfb"; + platform_device_register(pdev); return pdev; @@ -2246,7 +2248,7 @@ static __initdata struct clk *init_clocks[] = { &atmel_twi0_pclk, &atmel_mci0_pclk, #if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002) - &atmel_lcdfb0_hck1, + &atmel_lcdfb0_hclk, &atmel_lcdfb0_pixclk, #endif &ssc0_pclk, diff --git a/drivers/Kconfig b/drivers/Kconfig index 8d96238549fa..9953a42809ec 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -164,4 +164,6 @@ source "drivers/irqchip/Kconfig" source "drivers/ipack/Kconfig" +source "drivers/reset/Kconfig" + endmenu diff --git a/drivers/Makefile b/drivers/Makefile index 8e57688ebd95..130abc1dfd65 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -37,6 +37,9 @@ obj-$(CONFIG_XEN) += xen/ # regulators early, since some subsystems rely on them to initialize obj-$(CONFIG_REGULATOR) += regulator/ +# reset controllers early, since gpu drivers might rely on them to initialize +obj-$(CONFIG_RESET_CONTROLLER) += reset/ + # tty/ comes before char/ so that the VT console is the boot-time # default. obj-y += tty/ diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index e7f7fe9b2f09..137d3e730f86 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o obj-$(CONFIG_ARCH_TEGRA) += tegra/ +obj-$(CONFIG_PLAT_SAMSUNG) += samsung/ obj-$(CONFIG_X86) += x86/ diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile new file mode 100644 index 000000000000..b7c232e67425 --- /dev/null +++ b/drivers/clk/samsung/Makefile @@ -0,0 +1,8 @@ +# +# Samsung Clock specific Makefile +# + +obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o +obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o +obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o +obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c new file mode 100644 index 000000000000..71046694d9dd --- /dev/null +++ b/drivers/clk/samsung/clk-exynos4.c @@ -0,0 +1,1091 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * Copyright (c) 2013 Linaro Ltd. + * Author: Thomas Abraham <thomas.ab@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for all Exynos4 SoCs. +*/ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <plat/cpu.h> +#include "clk.h" +#include "clk-pll.h" + +/* Exynos4 clock controller register offsets */ +#define SRC_LEFTBUS 0x4200 +#define DIV_LEFTBUS 0x4500 +#define GATE_IP_LEFTBUS 0x4800 +#define E4X12_GATE_IP_IMAGE 0x4930 +#define SRC_RIGHTBUS 0x8200 +#define DIV_RIGHTBUS 0x8500 +#define GATE_IP_RIGHTBUS 0x8800 +#define E4X12_GATE_IP_PERIR 0x8960 +#define EPLL_LOCK 0xc010 +#define VPLL_LOCK 0xc020 +#define EPLL_CON0 0xc110 +#define EPLL_CON1 0xc114 +#define EPLL_CON2 0xc118 +#define VPLL_CON0 0xc120 +#define VPLL_CON1 0xc124 +#define VPLL_CON2 0xc128 +#define SRC_TOP0 0xc210 +#define SRC_TOP1 0xc214 +#define SRC_CAM 0xc220 +#define SRC_TV 0xc224 +#define SRC_MFC 0xcc28 +#define SRC_G3D 0xc22c +#define E4210_SRC_IMAGE 0xc230 +#define SRC_LCD0 0xc234 +#define E4210_SRC_LCD1 0xc238 +#define E4X12_SRC_ISP 0xc238 +#define SRC_MAUDIO 0xc23c +#define SRC_FSYS 0xc240 +#define SRC_PERIL0 0xc250 +#define SRC_PERIL1 0xc254 +#define E4X12_SRC_CAM1 0xc258 +#define SRC_MASK_TOP 0xc310 +#define SRC_MASK_CAM 0xc320 +#define SRC_MASK_TV 0xc324 +#define SRC_MASK_LCD0 0xc334 +#define E4210_SRC_MASK_LCD1 0xc338 +#define E4X12_SRC_MASK_ISP 0xc338 +#define SRC_MASK_MAUDIO 0xc33c +#define SRC_MASK_FSYS 0xc340 +#define SRC_MASK_PERIL0 0xc350 +#define SRC_MASK_PERIL1 0xc354 +#define DIV_TOP 0xc510 +#define DIV_CAM 0xc520 +#define DIV_TV 0xc524 +#define DIV_MFC 0xc528 +#define DIV_G3D 0xc52c +#define DIV_IMAGE 0xc530 +#define DIV_LCD0 0xc534 +#define E4210_DIV_LCD1 0xc538 +#define E4X12_DIV_ISP 0xc538 +#define DIV_MAUDIO 0xc53c +#define DIV_FSYS0 0xc540 +#define DIV_FSYS1 0xc544 +#define DIV_FSYS2 0xc548 +#define DIV_FSYS3 0xc54c +#define DIV_PERIL0 0xc550 +#define DIV_PERIL1 0xc554 +#define DIV_PERIL2 0xc558 +#define DIV_PERIL3 0xc55c +#define DIV_PERIL4 0xc560 +#define DIV_PERIL5 0xc564 +#define E4X12_DIV_CAM1 0xc568 +#define GATE_SCLK_CAM 0xc820 +#define GATE_IP_CAM 0xc920 +#define GATE_IP_TV 0xc924 +#define GATE_IP_MFC 0xc928 +#define GATE_IP_G3D 0xc92c +#define E4210_GATE_IP_IMAGE 0xc930 +#define GATE_IP_LCD0 0xc934 +#define E4210_GATE_IP_LCD1 0xc938 +#define E4X12_GATE_IP_ISP 0xc938 +#define E4X12_GATE_IP_MAUDIO 0xc93c +#define GATE_IP_FSYS 0xc940 +#define GATE_IP_GPS 0xc94c +#define GATE_IP_PERIL 0xc950 +#define E4210_GATE_IP_PERIR 0xc960 +#define GATE_BLOCK 0xc970 +#define E4X12_MPLL_CON0 0x10108 +#define SRC_DMC 0x10200 +#define SRC_MASK_DMC 0x10300 +#define DIV_DMC0 0x10500 +#define DIV_DMC1 0x10504 +#define GATE_IP_DMC 0x10900 +#define APLL_CON0 0x14100 +#define E4210_MPLL_CON0 0x14108 +#define SRC_CPU 0x14200 +#define DIV_CPU0 0x14500 +#define DIV_CPU1 0x14504 +#define GATE_SCLK_CPU 0x14800 +#define GATE_IP_CPU 0x14900 +#define E4X12_DIV_ISP0 0x18300 +#define E4X12_DIV_ISP1 0x18304 +#define E4X12_GATE_ISP0 0x18800 +#define E4X12_GATE_ISP1 0x18804 + +/* the exynos4 soc type */ +enum exynos4_soc { + EXYNOS4210, + EXYNOS4X12, +}; + +/* + * Let each supported clock get a unique id. This id is used to lookup the clock + * for device tree based platforms. The clocks are categorized into three + * sections: core, sclk gate and bus interface gate clocks. + * + * When adding a new clock to this list, it is advised to choose a clock + * category and add it to the end of that category. That is because the the + * device tree source file is referring to these ids and any change in the + * sequence number of existing clocks will require corresponding change in the + * device tree files. This limitation would go away when pre-processor support + * for dtc would be available. + */ +enum exynos4_clks { + none, + + /* core clocks */ + xxti, xusbxti, fin_pll, fout_apll, fout_mpll, fout_epll, fout_vpll, + sclk_apll, sclk_mpll, sclk_epll, sclk_vpll, arm_clk, aclk200, aclk100, + aclk160, aclk133, mout_mpll_user_t, mout_mpll_user_c, mout_core, + mout_apll, /* 20 */ + + /* gate for special clocks (sclk) */ + sclk_fimc0 = 128, sclk_fimc1, sclk_fimc2, sclk_fimc3, sclk_cam0, + sclk_cam1, sclk_csis0, sclk_csis1, sclk_hdmi, sclk_mixer, sclk_dac, + sclk_pixel, sclk_fimd0, sclk_mdnie0, sclk_mdnie_pwm0, sclk_mipi0, + sclk_audio0, sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_mmc4, + sclk_sata, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_uart4, + sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2, + sclk_slimbus, sclk_fimd1, sclk_mipi1, sclk_pcm1, sclk_pcm2, sclk_i2s1, + sclk_i2s2, sclk_mipihsi, sclk_mfc, sclk_pcm0, sclk_g3d, sclk_pwm_isp, + sclk_spi0_isp, sclk_spi1_isp, sclk_uart_isp, + + /* gate clocks */ + fimc0 = 256, fimc1, fimc2, fimc3, csis0, csis1, jpeg, smmu_fimc0, + smmu_fimc1, smmu_fimc2, smmu_fimc3, smmu_jpeg, vp, mixer, tvenc, hdmi, + smmu_tv, mfc, smmu_mfcl, smmu_mfcr, g3d, g2d, rotator, mdma, smmu_g2d, + smmu_rotator, smmu_mdma, fimd0, mie0, mdnie0, dsim0, smmu_fimd0, fimd1, + mie1, dsim1, smmu_fimd1, pdma0, pdma1, pcie_phy, sata_phy, tsi, sdmmc0, + sdmmc1, sdmmc2, sdmmc3, sdmmc4, sata, sromc, usb_host, usb_device, pcie, + onenand, nfcon, smmu_pcie, gps, smmu_gps, uart0, uart1, uart2, uart3, + uart4, i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c_hdmi, tsadc, + spi0, spi1, spi2, i2s1, i2s2, pcm0, i2s0, pcm1, pcm2, pwm, slimbus, + spdif, ac97, modemif, chipid, sysreg, hdmi_cec, mct, wdt, rtc, keyif, + audss, mipi_hsi, mdma2, pixelasyncm0, pixelasyncm1, fimc_lite0, + fimc_lite1, ppmuispx, ppmuispmx, fimc_isp, fimc_drc, fimc_fd, mcuisp, + gicisp, smmu_isp, smmu_drc, smmu_fd, smmu_lite0, smmu_lite1, mcuctl_isp, + mpwm_isp, i2c0_isp, i2c1_isp, mtcadc_isp, pwm_isp, wdt_isp, uart_isp, + asyncaxim, smmu_ispcx, spi0_isp, spi1_isp, pwm_isp_sclk, spi0_isp_sclk, + spi1_isp_sclk, uart_isp_sclk, + + /* mux clocks */ + mout_fimc0 = 384, mout_fimc1, mout_fimc2, mout_fimc3, mout_cam0, + mout_cam1, mout_csis0, mout_csis1, mout_g3d0, mout_g3d1, mout_g3d, + aclk400_mcuisp, + + /* div clocks */ + div_isp0 = 450, div_isp1, div_mcuisp0, div_mcuisp1, div_aclk200, + div_aclk400_mcuisp, + + nr_clks, +}; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static __initdata unsigned long exynos4210_clk_save[] = { + E4210_SRC_IMAGE, + E4210_SRC_LCD1, + E4210_SRC_MASK_LCD1, + E4210_DIV_LCD1, + E4210_GATE_IP_IMAGE, + E4210_GATE_IP_LCD1, + E4210_GATE_IP_PERIR, + E4210_MPLL_CON0, +}; + +static __initdata unsigned long exynos4x12_clk_save[] = { + E4X12_GATE_IP_IMAGE, + E4X12_GATE_IP_PERIR, + E4X12_SRC_CAM1, + E4X12_DIV_ISP, + E4X12_DIV_CAM1, + E4X12_MPLL_CON0, +}; + +static __initdata unsigned long exynos4_clk_regs[] = { + SRC_LEFTBUS, + DIV_LEFTBUS, + GATE_IP_LEFTBUS, + SRC_RIGHTBUS, + DIV_RIGHTBUS, + GATE_IP_RIGHTBUS, + EPLL_CON0, + EPLL_CON1, + EPLL_CON2, + VPLL_CON0, + VPLL_CON1, + VPLL_CON2, + SRC_TOP0, + SRC_TOP1, + SRC_CAM, + SRC_TV, + SRC_MFC, + SRC_G3D, + SRC_LCD0, + SRC_MAUDIO, + SRC_FSYS, + SRC_PERIL0, + SRC_PERIL1, + SRC_MASK_TOP, + SRC_MASK_CAM, + SRC_MASK_TV, + SRC_MASK_LCD0, + SRC_MASK_MAUDIO, + SRC_MASK_FSYS, + SRC_MASK_PERIL0, + SRC_MASK_PERIL1, + DIV_TOP, + DIV_CAM, + DIV_TV, + DIV_MFC, + DIV_G3D, + DIV_IMAGE, + DIV_LCD0, + DIV_MAUDIO, + DIV_FSYS0, + DIV_FSYS1, + DIV_FSYS2, + DIV_FSYS3, + DIV_PERIL0, + DIV_PERIL1, + DIV_PERIL2, + DIV_PERIL3, + DIV_PERIL4, + DIV_PERIL5, + GATE_SCLK_CAM, + GATE_IP_CAM, + GATE_IP_TV, + GATE_IP_MFC, + GATE_IP_G3D, + GATE_IP_LCD0, + GATE_IP_FSYS, + GATE_IP_GPS, + GATE_IP_PERIL, + GATE_BLOCK, + SRC_MASK_DMC, + SRC_DMC, + DIV_DMC0, + DIV_DMC1, + GATE_IP_DMC, + APLL_CON0, + SRC_CPU, + DIV_CPU0, + DIV_CPU1, + GATE_SCLK_CPU, + GATE_IP_CPU, +}; + +/* list of all parent clock list */ +PNAME(mout_apll_p) = { "fin_pll", "fout_apll", }; +PNAME(mout_mpll_p) = { "fin_pll", "fout_mpll", }; +PNAME(mout_epll_p) = { "fin_pll", "fout_epll", }; +PNAME(mout_vpllsrc_p) = { "fin_pll", "sclk_hdmi24m", }; +PNAME(mout_vpll_p) = { "fin_pll", "fout_vpll", }; +PNAME(sclk_evpll_p) = { "sclk_epll", "sclk_vpll", }; +PNAME(mout_mfc_p) = { "mout_mfc0", "mout_mfc1", }; +PNAME(mout_g3d_p) = { "mout_g3d0", "mout_g3d1", }; +PNAME(mout_g2d_p) = { "mout_g2d0", "mout_g2d1", }; +PNAME(mout_hdmi_p) = { "sclk_pixel", "sclk_hdmiphy", }; +PNAME(mout_jpeg_p) = { "mout_jpeg0", "mout_jpeg1", }; +PNAME(mout_spdif_p) = { "sclk_audio0", "sclk_audio1", "sclk_audio2", + "spdif_extclk", }; +PNAME(mout_onenand_p) = {"aclk133", "aclk160", }; +PNAME(mout_onenand1_p) = {"mout_onenand", "sclk_vpll", }; + +/* Exynos 4210-specific parent groups */ +PNAME(sclk_vpll_p4210) = { "mout_vpllsrc", "fout_vpll", }; +PNAME(mout_core_p4210) = { "mout_apll", "sclk_mpll", }; +PNAME(sclk_ampll_p4210) = { "sclk_mpll", "sclk_apll", }; +PNAME(group1_p4210) = { "xxti", "xusbxti", "sclk_hdmi24m", + "sclk_usbphy0", "none", "sclk_hdmiphy", + "sclk_mpll", "sclk_epll", "sclk_vpll", }; +PNAME(mout_audio0_p4210) = { "cdclk0", "none", "sclk_hdmi24m", + "sclk_usbphy0", "xxti", "xusbxti", "sclk_mpll", + "sclk_epll", "sclk_vpll" }; +PNAME(mout_audio1_p4210) = { "cdclk1", "none", "sclk_hdmi24m", + "sclk_usbphy0", "xxti", "xusbxti", "sclk_mpll", + "sclk_epll", "sclk_vpll", }; +PNAME(mout_audio2_p4210) = { "cdclk2", "none", "sclk_hdmi24m", + "sclk_usbphy0", "xxti", "xusbxti", "sclk_mpll", + "sclk_epll", "sclk_vpll", }; +PNAME(mout_mixer_p4210) = { "sclk_dac", "sclk_hdmi", }; +PNAME(mout_dac_p4210) = { "sclk_vpll", "sclk_hdmiphy", }; + +/* Exynos 4x12-specific parent groups */ +PNAME(mout_mpll_user_p4x12) = { "fin_pll", "sclk_mpll", }; +PNAME(mout_core_p4x12) = { "mout_apll", "mout_mpll_user_c", }; +PNAME(sclk_ampll_p4x12) = { "mout_mpll_user_t", "sclk_apll", }; +PNAME(group1_p4x12) = { "xxti", "xusbxti", "sclk_hdmi24m", "sclk_usbphy0", + "none", "sclk_hdmiphy", "mout_mpll_user_t", + "sclk_epll", "sclk_vpll", }; +PNAME(mout_audio0_p4x12) = { "cdclk0", "none", "sclk_hdmi24m", + "sclk_usbphy0", "xxti", "xusbxti", + "mout_mpll_user_t", "sclk_epll", "sclk_vpll" }; +PNAME(mout_audio1_p4x12) = { "cdclk1", "none", "sclk_hdmi24m", + "sclk_usbphy0", "xxti", "xusbxti", + "mout_mpll_user_t", "sclk_epll", "sclk_vpll", }; +PNAME(mout_audio2_p4x12) = { "cdclk2", "none", "sclk_hdmi24m", + "sclk_usbphy0", "xxti", "xusbxti", + "mout_mpll_user_t", "sclk_epll", "sclk_vpll", }; +PNAME(aclk_p4412) = { "mout_mpll_user_t", "sclk_apll", }; +PNAME(mout_user_aclk400_mcuisp_p4x12) = {"fin_pll", "div_aclk400_mcuisp", }; +PNAME(mout_user_aclk200_p4x12) = {"fin_pll", "div_aclk200", }; +PNAME(mout_user_aclk266_gps_p4x12) = {"fin_pll", "div_aclk266_gps", }; + +/* fixed rate clocks generated outside the soc */ +struct samsung_fixed_rate_clock exynos4_fixed_rate_ext_clks[] __initdata = { + FRATE(xxti, "xxti", NULL, CLK_IS_ROOT, 0), + FRATE(xusbxti, "xusbxti", NULL, CLK_IS_ROOT, 0), +}; + +/* fixed rate clocks generated inside the soc */ +struct samsung_fixed_rate_clock exynos4_fixed_rate_clks[] __initdata = { + FRATE(none, "sclk_hdmi24m", NULL, CLK_IS_ROOT, 24000000), + FRATE(none, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000), + FRATE(none, "sclk_usbphy0", NULL, CLK_IS_ROOT, 48000000), +}; + +struct samsung_fixed_rate_clock exynos4210_fixed_rate_clks[] __initdata = { + FRATE(none, "sclk_usbphy1", NULL, CLK_IS_ROOT, 48000000), +}; + +/* list of mux clocks supported in all exynos4 soc's */ +struct samsung_mux_clock exynos4_mux_clks[] __initdata = { + MUX_F(mout_apll, "mout_apll", mout_apll_p, SRC_CPU, 0, 1, + CLK_SET_RATE_PARENT, 0), + MUX(none, "mout_hdmi", mout_hdmi_p, SRC_TV, 0, 1), + MUX(none, "mout_mfc1", sclk_evpll_p, SRC_MFC, 4, 1), + MUX(none, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1), + MUX_F(mout_g3d1, "mout_g3d1", sclk_evpll_p, SRC_G3D, 4, 1, + CLK_SET_RATE_PARENT, 0), + MUX_F(mout_g3d, "mout_g3d", mout_g3d_p, SRC_G3D, 8, 1, + CLK_SET_RATE_PARENT, 0), + MUX(none, "mout_spdif", mout_spdif_p, SRC_PERIL1, 8, 2), + MUX(none, "mout_onenand1", mout_onenand1_p, SRC_TOP0, 0, 1), + MUX_A(sclk_epll, "sclk_epll", mout_epll_p, SRC_TOP0, 4, 1, "sclk_epll"), + MUX(none, "mout_onenand", mout_onenand_p, SRC_TOP0, 28, 1), +}; + +/* list of mux clocks supported in exynos4210 soc */ +struct samsung_mux_clock exynos4210_mux_clks[] __initdata = { + MUX(none, "mout_aclk200", sclk_ampll_p4210, SRC_TOP0, 12, 1), + MUX(none, "mout_aclk100", sclk_ampll_p4210, SRC_TOP0, 16, 1), + MUX(none, "mout_aclk160", sclk_ampll_p4210, SRC_TOP0, 20, 1), + MUX(none, "mout_aclk133", sclk_ampll_p4210, SRC_TOP0, 24, 1), + MUX(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP1, 0, 1), + MUX(none, "mout_mixer", mout_mixer_p4210, SRC_TV, 4, 1), + MUX(none, "mout_dac", mout_dac_p4210, SRC_TV, 8, 1), + MUX(none, "mout_g2d0", sclk_ampll_p4210, E4210_SRC_IMAGE, 0, 1), + MUX(none, "mout_g2d1", sclk_evpll_p, E4210_SRC_IMAGE, 4, 1), + MUX(none, "mout_g2d", mout_g2d_p, E4210_SRC_IMAGE, 8, 1), + MUX(none, "mout_fimd1", group1_p4210, E4210_SRC_LCD1, 0, 4), + MUX(none, "mout_mipi1", group1_p4210, E4210_SRC_LCD1, 12, 4), + MUX_A(sclk_mpll, "sclk_mpll", mout_mpll_p, SRC_CPU, 8, 1, "sclk_mpll"), + MUX_A(mout_core, "mout_core", mout_core_p4210, + SRC_CPU, 16, 1, "mout_core"), + MUX_A(sclk_vpll, "sclk_vpll", sclk_vpll_p4210, + SRC_TOP0, 8, 1, "sclk_vpll"), + MUX(mout_fimc0, "mout_fimc0", group1_p4210, SRC_CAM, 0, 4), + MUX(mout_fimc1, "mout_fimc1", group1_p4210, SRC_CAM, 4, 4), + MUX(mout_fimc2, "mout_fimc2", group1_p4210, SRC_CAM, 8, 4), + MUX(mout_fimc3, "mout_fimc3", group1_p4210, SRC_CAM, 12, 4), + MUX(mout_cam0, "mout_cam0", group1_p4210, SRC_CAM, 16, 4), + MUX(mout_cam1, "mout_cam1", group1_p4210, SRC_CAM, 20, 4), + MUX(mout_csis0, "mout_csis0", group1_p4210, SRC_CAM, 24, 4), + MUX(mout_csis1, "mout_csis1", group1_p4210, SRC_CAM, 28, 4), + MUX(none, "mout_mfc0", sclk_ampll_p4210, SRC_MFC, 0, 1), + MUX_F(mout_g3d0, "mout_g3d0", sclk_ampll_p4210, SRC_G3D, 0, 1, + CLK_SET_RATE_PARENT, 0), + MUX(none, "mout_fimd0", group1_p4210, SRC_LCD0, 0, 4), + MUX(none, "mout_mipi0", group1_p4210, SRC_LCD0, 12, 4), + MUX(none, "mout_audio0", mout_audio0_p4210, SRC_MAUDIO, 0, 4), + MUX(none, "mout_mmc0", group1_p4210, SRC_FSYS, 0, 4), + MUX(none, "mout_mmc1", group1_p4210, SRC_FSYS, 4, 4), + MUX(none, "mout_mmc2", group1_p4210, SRC_FSYS, 8, 4), + MUX(none, "mout_mmc3", group1_p4210, SRC_FSYS, 12, 4), + MUX(none, "mout_mmc4", group1_p4210, SRC_FSYS, 16, 4), + MUX(none, "mout_sata", sclk_ampll_p4210, SRC_FSYS, 24, 1), + MUX(none, "mout_uart0", group1_p4210, SRC_PERIL0, 0, 4), + MUX(none, "mout_uart1", group1_p4210, SRC_PERIL0, 4, 4), + MUX(none, "mout_uart2", group1_p4210, SRC_PERIL0, 8, 4), + MUX(none, "mout_uart3", group1_p4210, SRC_PERIL0, 12, 4), + MUX(none, "mout_uart4", group1_p4210, SRC_PERIL0, 16, 4), + MUX(none, "mout_audio1", mout_audio1_p4210, SRC_PERIL1, 0, 4), + MUX(none, "mout_audio2", mout_audio2_p4210, SRC_PERIL1, 4, 4), + MUX(none, "mout_spi0", group1_p4210, SRC_PERIL1, 16, 4), + MUX(none, "mout_spi1", group1_p4210, SRC_PERIL1, 20, 4), + MUX(none, "mout_spi2", group1_p4210, SRC_PERIL1, 24, 4), +}; + +/* list of mux clocks supported in exynos4x12 soc */ +struct samsung_mux_clock exynos4x12_mux_clks[] __initdata = { + MUX(mout_mpll_user_c, "mout_mpll_user_c", mout_mpll_user_p4x12, + SRC_CPU, 24, 1), + MUX(none, "mout_aclk266_gps", aclk_p4412, SRC_TOP1, 4, 1), + MUX(none, "mout_aclk400_mcuisp", aclk_p4412, SRC_TOP1, 8, 1), + MUX(mout_mpll_user_t, "mout_mpll_user_t", mout_mpll_user_p4x12, + SRC_TOP1, 12, 1), + MUX(none, "mout_user_aclk266_gps", mout_user_aclk266_gps_p4x12, + SRC_TOP1, 16, 1), + MUX(aclk200, "aclk200", mout_user_aclk200_p4x12, SRC_TOP1, 20, 1), + MUX(aclk400_mcuisp, "aclk400_mcuisp", mout_user_aclk400_mcuisp_p4x12, + SRC_TOP1, 24, 1), + MUX(none, "mout_aclk200", aclk_p4412, SRC_TOP0, 12, 1), + MUX(none, "mout_aclk100", aclk_p4412, SRC_TOP0, 16, 1), + MUX(none, "mout_aclk160", aclk_p4412, SRC_TOP0, 20, 1), + MUX(none, "mout_aclk133", aclk_p4412, SRC_TOP0, 24, 1), + MUX(none, "mout_mdnie0", group1_p4x12, SRC_LCD0, 4, 4), + MUX(none, "mout_mdnie_pwm0", group1_p4x12, SRC_LCD0, 8, 4), + MUX(none, "mout_sata", sclk_ampll_p4x12, SRC_FSYS, 24, 1), + MUX(none, "mout_jpeg0", sclk_ampll_p4x12, E4X12_SRC_CAM1, 0, 1), + MUX(none, "mout_jpeg1", sclk_evpll_p, E4X12_SRC_CAM1, 4, 1), + MUX(none, "mout_jpeg", mout_jpeg_p, E4X12_SRC_CAM1, 8, 1), + MUX_A(sclk_mpll, "sclk_mpll", mout_mpll_p, + SRC_DMC, 12, 1, "sclk_mpll"), + MUX_A(sclk_vpll, "sclk_vpll", mout_vpll_p, + SRC_TOP0, 8, 1, "sclk_vpll"), + MUX(mout_core, "mout_core", mout_core_p4x12, SRC_CPU, 16, 1), + MUX(mout_fimc0, "mout_fimc0", group1_p4x12, SRC_CAM, 0, 4), + MUX(mout_fimc1, "mout_fimc1", group1_p4x12, SRC_CAM, 4, 4), + MUX(mout_fimc2, "mout_fimc2", group1_p4x12, SRC_CAM, 8, 4), + MUX(mout_fimc3, "mout_fimc3", group1_p4x12, SRC_CAM, 12, 4), + MUX(mout_cam0, "mout_cam0", group1_p4x12, SRC_CAM, 16, 4), + MUX(mout_cam1, "mout_cam1", group1_p4x12, SRC_CAM, 20, 4), + MUX(mout_csis0, "mout_csis0", group1_p4x12, SRC_CAM, 24, 4), + MUX(mout_csis1, "mout_csis1", group1_p4x12, SRC_CAM, 28, 4), + MUX(none, "mout_mfc0", sclk_ampll_p4x12, SRC_MFC, 0, 1), + MUX_F(mout_g3d0, "mout_g3d0", sclk_ampll_p4x12, SRC_G3D, 0, 1, + CLK_SET_RATE_PARENT, 0), + MUX(none, "mout_fimd0", group1_p4x12, SRC_LCD0, 0, 4), + MUX(none, "mout_mipi0", group1_p4x12, SRC_LCD0, 12, 4), + MUX(none, "mout_audio0", mout_audio0_p4x12, SRC_MAUDIO, 0, 4), + MUX(none, "mout_mmc0", group1_p4x12, SRC_FSYS, 0, 4), + MUX(none, "mout_mmc1", group1_p4x12, SRC_FSYS, 4, 4), + MUX(none, "mout_mmc2", group1_p4x12, SRC_FSYS, 8, 4), + MUX(none, "mout_mmc3", group1_p4x12, SRC_FSYS, 12, 4), + MUX(none, "mout_mmc4", group1_p4x12, SRC_FSYS, 16, 4), + MUX(none, "mout_mipihsi", aclk_p4412, SRC_FSYS, 24, 1), + MUX(none, "mout_uart0", group1_p4x12, SRC_PERIL0, 0, 4), + MUX(none, "mout_uart1", group1_p4x12, SRC_PERIL0, 4, 4), + MUX(none, "mout_uart2", group1_p4x12, SRC_PERIL0, 8, 4), + MUX(none, "mout_uart3", group1_p4x12, SRC_PERIL0, 12, 4), + MUX(none, "mout_uart4", group1_p4x12, SRC_PERIL0, 16, 4), + MUX(none, "mout_audio1", mout_audio1_p4x12, SRC_PERIL1, 0, 4), + MUX(none, "mout_audio2", mout_audio2_p4x12, SRC_PERIL1, 4, 4), + MUX(none, "mout_spi0", group1_p4x12, SRC_PERIL1, 16, 4), + MUX(none, "mout_spi1", group1_p4x12, SRC_PERIL1, 20, 4), + MUX(none, "mout_spi2", group1_p4x12, SRC_PERIL1, 24, 4), + MUX(none, "mout_pwm_isp", group1_p4x12, E4X12_SRC_ISP, 0, 4), + MUX(none, "mout_spi0_isp", group1_p4x12, E4X12_SRC_ISP, 4, 4), + MUX(none, "mout_spi1_isp", group1_p4x12, E4X12_SRC_ISP, 8, 4), + MUX(none, "mout_uart_isp", group1_p4x12, E4X12_SRC_ISP, 12, 4), +}; + +/* list of divider clocks supported in all exynos4 soc's */ +struct samsung_div_clock exynos4_div_clks[] __initdata = { + DIV(none, "div_core", "mout_core", DIV_CPU0, 0, 3), + DIV(none, "div_core2", "div_core", DIV_CPU0, 28, 3), + DIV(none, "div_fimc0", "mout_fimc0", DIV_CAM, 0, 4), + DIV(none, "div_fimc1", "mout_fimc1", DIV_CAM, 4, 4), + DIV(none, "div_fimc2", "mout_fimc2", DIV_CAM, 8, 4), + DIV(none, "div_fimc3", "mout_fimc3", DIV_CAM, 12, 4), + DIV(none, "div_cam0", "mout_cam0", DIV_CAM, 16, 4), + DIV(none, "div_cam1", "mout_cam1", DIV_CAM, 20, 4), + DIV(none, "div_csis0", "mout_csis0", DIV_CAM, 24, 4), + DIV(none, "div_csis1", "mout_csis1", DIV_CAM, 28, 4), + DIV(sclk_mfc, "sclk_mfc", "mout_mfc", DIV_MFC, 0, 4), + DIV_F(none, "div_g3d", "mout_g3d", DIV_G3D, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV(none, "div_fimd0", "mout_fimd0", DIV_LCD0, 0, 4), + DIV(none, "div_mipi0", "mout_mipi0", DIV_LCD0, 16, 4), + DIV(none, "div_audio0", "mout_audio0", DIV_MAUDIO, 0, 4), + DIV(sclk_pcm0, "sclk_pcm0", "sclk_audio0", DIV_MAUDIO, 4, 8), + DIV(none, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4), + DIV(none, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4), + DIV(none, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4), + DIV(none, "div_mmc3", "mout_mmc3", DIV_FSYS2, 16, 4), + DIV(sclk_pixel, "sclk_pixel", "sclk_vpll", DIV_TV, 0, 4), + DIV(aclk100, "aclk100", "mout_aclk100", DIV_TOP, 4, 4), + DIV(aclk160, "aclk160", "mout_aclk160", DIV_TOP, 8, 3), + DIV(aclk133, "aclk133", "mout_aclk133", DIV_TOP, 12, 3), + DIV(none, "div_onenand", "mout_onenand1", DIV_TOP, 16, 3), + DIV(sclk_slimbus, "sclk_slimbus", "sclk_epll", DIV_PERIL3, 4, 4), + DIV(sclk_pcm1, "sclk_pcm1", "sclk_audio1", DIV_PERIL4, 4, 8), + DIV(sclk_pcm2, "sclk_pcm2", "sclk_audio2", DIV_PERIL4, 20, 8), + DIV(sclk_i2s1, "sclk_i2s1", "sclk_audio1", DIV_PERIL5, 0, 6), + DIV(sclk_i2s2, "sclk_i2s2", "sclk_audio2", DIV_PERIL5, 8, 6), + DIV(none, "div_mmc4", "mout_mmc4", DIV_FSYS3, 0, 4), + DIV(none, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8), + DIV(none, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4), + DIV(none, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4), + DIV(none, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4), + DIV(none, "div_uart3", "mout_uart3", DIV_PERIL0, 12, 4), + DIV(none, "div_uart4", "mout_uart4", DIV_PERIL0, 16, 4), + DIV(none, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4), + DIV(none, "div_spi_pre0", "div_spi0", DIV_PERIL1, 8, 8), + DIV(none, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4), + DIV(none, "div_spi_pre1", "div_spi1", DIV_PERIL1, 24, 8), + DIV(none, "div_spi2", "mout_spi2", DIV_PERIL2, 0, 4), + DIV(none, "div_spi_pre2", "div_spi2", DIV_PERIL2, 8, 8), + DIV(none, "div_audio1", "mout_audio1", DIV_PERIL4, 0, 4), + DIV(none, "div_audio2", "mout_audio2", DIV_PERIL4, 16, 4), + DIV_A(arm_clk, "arm_clk", "div_core2", DIV_CPU0, 28, 3, "arm_clk"), + DIV_A(sclk_apll, "sclk_apll", "mout_apll", + DIV_CPU0, 24, 3, "sclk_apll"), + DIV_F(none, "div_mipi_pre0", "div_mipi0", DIV_LCD0, 20, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(none, "div_mmc_pre0", "div_mmc0", DIV_FSYS1, 8, 8, + CLK_SET_RATE_PARENT, 0), + DIV_F(none, "div_mmc_pre1", "div_mmc1", DIV_FSYS1, 24, 8, + CLK_SET_RATE_PARENT, 0), + DIV_F(none, "div_mmc_pre2", "div_mmc2", DIV_FSYS2, 8, 8, + CLK_SET_RATE_PARENT, 0), + DIV_F(none, "div_mmc_pre3", "div_mmc3", DIV_FSYS2, 24, 8, + CLK_SET_RATE_PARENT, 0), +}; + +/* list of divider clocks supported in exynos4210 soc */ +struct samsung_div_clock exynos4210_div_clks[] __initdata = { + DIV(aclk200, "aclk200", "mout_aclk200", DIV_TOP, 0, 3), + DIV(none, "div_g2d", "mout_g2d", DIV_IMAGE, 0, 4), + DIV(none, "div_fimd1", "mout_fimd1", E4210_DIV_LCD1, 0, 4), + DIV(none, "div_mipi1", "mout_mipi1", E4210_DIV_LCD1, 16, 4), + DIV(none, "div_sata", "mout_sata", DIV_FSYS0, 20, 4), + DIV_F(none, "div_mipi_pre1", "div_mipi1", E4210_DIV_LCD1, 20, 4, + CLK_SET_RATE_PARENT, 0), +}; + +/* list of divider clocks supported in exynos4x12 soc */ +struct samsung_div_clock exynos4x12_div_clks[] __initdata = { + DIV(none, "div_mdnie0", "mout_mdnie0", DIV_LCD0, 4, 4), + DIV(none, "div_mdnie_pwm0", "mout_mdnie_pwm0", DIV_LCD0, 8, 4), + DIV(none, "div_mdnie_pwm_pre0", "div_mdnie_pwm0", DIV_LCD0, 12, 4), + DIV(none, "div_mipihsi", "mout_mipihsi", DIV_FSYS0, 20, 4), + DIV(none, "div_jpeg", "mout_jpeg", E4X12_DIV_CAM1, 0, 4), + DIV(div_aclk200, "div_aclk200", "mout_aclk200", DIV_TOP, 0, 3), + DIV(none, "div_aclk266_gps", "mout_aclk266_gps", DIV_TOP, 20, 3), + DIV(div_aclk400_mcuisp, "div_aclk400_mcuisp", "mout_aclk400_mcuisp", + DIV_TOP, 24, 3), + DIV(none, "div_pwm_isp", "mout_pwm_isp", E4X12_DIV_ISP, 0, 4), + DIV(none, "div_spi0_isp", "mout_spi0_isp", E4X12_DIV_ISP, 4, 4), + DIV(none, "div_spi0_isp_pre", "div_spi0_isp", E4X12_DIV_ISP, 8, 8), + DIV(none, "div_spi1_isp", "mout_spi1_isp", E4X12_DIV_ISP, 16, 4), + DIV(none, "div_spi1_isp_pre", "div_spi1_isp", E4X12_DIV_ISP, 20, 8), + DIV(none, "div_uart_isp", "mout_uart_isp", E4X12_DIV_ISP, 28, 4), + DIV(div_isp0, "div_isp0", "aclk200", E4X12_DIV_ISP0, 0, 3), + DIV(div_isp1, "div_isp1", "aclk200", E4X12_DIV_ISP0, 4, 3), + DIV(none, "div_mpwm", "div_isp1", E4X12_DIV_ISP1, 0, 3), + DIV(div_mcuisp0, "div_mcuisp0", "aclk400_mcuisp", E4X12_DIV_ISP1, 4, 3), + DIV(div_mcuisp1, "div_mcuisp1", "div_mcuisp0", E4X12_DIV_ISP1, 8, 3), +}; + +/* list of gate clocks supported in all exynos4 soc's */ +struct samsung_gate_clock exynos4_gate_clks[] __initdata = { + /* + * After all Exynos4 based platforms are migrated to use device tree, + * the device name and clock alias names specified below for some + * of the clocks can be removed. + */ + GATE(sclk_hdmi, "sclk_hdmi", "mout_hdmi", SRC_MASK_TV, 0, 0, 0), + GATE(sclk_spdif, "sclk_spdif", "mout_spdif", SRC_MASK_PERIL1, 8, 0, 0), + GATE(jpeg, "jpeg", "aclk160", GATE_IP_CAM, 6, 0, 0), + GATE(mie0, "mie0", "aclk160", GATE_IP_LCD0, 1, 0, 0), + GATE(dsim0, "dsim0", "aclk160", GATE_IP_LCD0, 3, 0, 0), + GATE(fimd1, "fimd1", "aclk160", E4210_GATE_IP_LCD1, 0, 0, 0), + GATE(mie1, "mie1", "aclk160", E4210_GATE_IP_LCD1, 1, 0, 0), + GATE(dsim1, "dsim1", "aclk160", E4210_GATE_IP_LCD1, 3, 0, 0), + GATE(smmu_fimd1, "smmu_fimd1", "aclk160", E4210_GATE_IP_LCD1, 4, 0, 0), + GATE(tsi, "tsi", "aclk133", GATE_IP_FSYS, 4, 0, 0), + GATE(sromc, "sromc", "aclk133", GATE_IP_FSYS, 11, 0, 0), + GATE(sclk_g3d, "sclk_g3d", "div_g3d", GATE_IP_G3D, 0, + CLK_SET_RATE_PARENT, 0), + GATE(usb_device, "usb_device", "aclk133", GATE_IP_FSYS, 13, 0, 0), + GATE(onenand, "onenand", "aclk133", GATE_IP_FSYS, 15, 0, 0), + GATE(nfcon, "nfcon", "aclk133", GATE_IP_FSYS, 16, 0, 0), + GATE(gps, "gps", "aclk133", GATE_IP_GPS, 0, 0, 0), + GATE(smmu_gps, "smmu_gps", "aclk133", GATE_IP_GPS, 1, 0, 0), + GATE(slimbus, "slimbus", "aclk100", GATE_IP_PERIL, 25, 0, 0), + GATE(sclk_cam0, "sclk_cam0", "div_cam0", GATE_SCLK_CAM, 4, + CLK_SET_RATE_PARENT, 0), + GATE(sclk_cam1, "sclk_cam1", "div_cam1", GATE_SCLK_CAM, 5, + CLK_SET_RATE_PARENT, 0), + GATE(sclk_mipi0, "sclk_mipi0", "div_mipi_pre0", + SRC_MASK_LCD0, 12, CLK_SET_RATE_PARENT, 0), + GATE(sclk_audio0, "sclk_audio0", "div_audio0", SRC_MASK_MAUDIO, 0, + CLK_SET_RATE_PARENT, 0), + GATE(sclk_audio1, "sclk_audio1", "div_audio1", SRC_MASK_PERIL1, 0, + CLK_SET_RATE_PARENT, 0), + GATE_D(vp, "s5p-mixer", "vp", "aclk160", GATE_IP_TV, 0, 0, 0), + GATE_D(mixer, "s5p-mixer", "mixer", "aclk160", GATE_IP_TV, 1, 0, 0), + GATE_D(hdmi, "exynos4-hdmi", "hdmi", "aclk160", GATE_IP_TV, 3, 0, 0), + GATE_A(pwm, "pwm", "aclk100", GATE_IP_PERIL, 24, 0, 0, "timers"), + GATE_A(sdmmc4, "sdmmc4", "aclk133", GATE_IP_FSYS, 9, 0, 0, "biu"), + GATE_A(usb_host, "usb_host", "aclk133", + GATE_IP_FSYS, 12, 0, 0, "usbhost"), + GATE_DA(sclk_fimc0, "exynos4-fimc.0", "sclk_fimc0", "div_fimc0", + SRC_MASK_CAM, 0, CLK_SET_RATE_PARENT, 0, "sclk_fimc"), + GATE_DA(sclk_fimc1, "exynos4-fimc.1", "sclk_fimc1", "div_fimc1", + SRC_MASK_CAM, 4, CLK_SET_RATE_PARENT, 0, "sclk_fimc"), + GATE_DA(sclk_fimc2, "exynos4-fimc.2", "sclk_fimc2", "div_fimc2", + SRC_MASK_CAM, 8, CLK_SET_RATE_PARENT, 0, "sclk_fimc"), + GATE_DA(sclk_fimc3, "exynos4-fimc.3", "sclk_fimc3", "div_fimc3", + SRC_MASK_CAM, 12, CLK_SET_RATE_PARENT, 0, "sclk_fimc"), + GATE_DA(sclk_csis0, "s5p-mipi-csis.0", "sclk_csis0", "div_csis0", + SRC_MASK_CAM, 24, CLK_SET_RATE_PARENT, 0, "sclk_csis"), + GATE_DA(sclk_csis1, "s5p-mipi-csis.1", "sclk_csis1", "div_csis1", + SRC_MASK_CAM, 28, CLK_SET_RATE_PARENT, 0, "sclk_csis"), + GATE_DA(sclk_fimd0, "exynos4-fb.0", "sclk_fimd0", "div_fimd0", + SRC_MASK_LCD0, 0, CLK_SET_RATE_PARENT, 0, "sclk_fimd"), + GATE_DA(sclk_mmc0, "exynos4-sdhci.0", "sclk_mmc0", "div_mmc_pre0", + SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0, + "mmc_busclk.2"), + GATE_DA(sclk_mmc1, "exynos4-sdhci.1", "sclk_mmc1", "div_mmc_pre1", + SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0, + "mmc_busclk.2"), + GATE_DA(sclk_mmc2, "exynos4-sdhci.2", "sclk_mmc2", "div_mmc_pre2", + SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0, + "mmc_busclk.2"), + GATE_DA(sclk_mmc3, "exynos4-sdhci.3", "sclk_mmc3", "div_mmc_pre3", + SRC_MASK_FSYS, 12, CLK_SET_RATE_PARENT, 0, + "mmc_busclk.2"), + GATE_DA(sclk_mmc4, NULL, "sclk_mmc4", "div_mmc_pre4", + SRC_MASK_FSYS, 16, CLK_SET_RATE_PARENT, 0, "ciu"), + GATE_DA(sclk_uart0, "exynos4210-uart.0", "uclk0", "div_uart0", + SRC_MASK_PERIL0, 0, CLK_SET_RATE_PARENT, + 0, "clk_uart_baud0"), + GATE_DA(sclk_uart1, "exynos4210-uart.1", "uclk1", "div_uart1", + SRC_MASK_PERIL0, 4, CLK_SET_RATE_PARENT, + 0, "clk_uart_baud0"), + GATE_DA(sclk_uart2, "exynos4210-uart.2", "uclk2", "div_uart2", + SRC_MASK_PERIL0, 8, CLK_SET_RATE_PARENT, + 0, "clk_uart_baud0"), + GATE_DA(sclk_uart3, "exynos4210-uart.3", "uclk3", "div_uart3", + SRC_MASK_PERIL0, 12, CLK_SET_RATE_PARENT, + 0, "clk_uart_baud0"), + GATE_DA(sclk_uart4, "exynos4210-uart.4", "uclk4", "div_uart4", + SRC_MASK_PERIL0, 16, CLK_SET_RATE_PARENT, + 0, "clk_uart_baud0"), + GATE(sclk_audio2, "sclk_audio2", "div_audio2", SRC_MASK_PERIL1, 4, + CLK_SET_RATE_PARENT, 0), + GATE_DA(sclk_spi0, "exynos4210-spi.0", "sclk_spi0", "div_spi_pre0", + SRC_MASK_PERIL1, 16, CLK_SET_RATE_PARENT, + 0, "spi_busclk0"), + GATE_DA(sclk_spi1, "exynos4210-spi.1", "sclk_spi1", "div_spi_pre1", + SRC_MASK_PERIL1, 20, CLK_SET_RATE_PARENT, + 0, "spi_busclk0"), + GATE_DA(sclk_spi2, "exynos4210-spi.2", "sclk_spi2", "div_spi_pre2", + SRC_MASK_PERIL1, 24, CLK_SET_RATE_PARENT, + 0, "spi_busclk0"), + GATE_DA(fimc0, "exynos4-fimc.0", "fimc0", "aclk160", + GATE_IP_CAM, 0, 0, 0, "fimc"), + GATE_DA(fimc1, "exynos4-fimc.1", "fimc1", "aclk160", + GATE_IP_CAM, 1, 0, 0, "fimc"), + GATE_DA(fimc2, "exynos4-fimc.2", "fimc2", "aclk160", + GATE_IP_CAM, 2, 0, 0, "fimc"), + GATE_DA(fimc3, "exynos4-fimc.3", "fimc3", "aclk160", + GATE_IP_CAM, 3, 0, 0, "fimc"), + GATE_DA(csis0, "s5p-mipi-csis.0", "csis0", "aclk160", + GATE_IP_CAM, 4, 0, 0, "fimc"), + GATE_DA(csis1, "s5p-mipi-csis.1", "csis1", "aclk160", + GATE_IP_CAM, 5, 0, 0, "fimc"), + GATE_DA(smmu_fimc0, "exynos-sysmmu.5", "smmu_fimc0", "aclk160", + GATE_IP_CAM, 7, 0, 0, "sysmmu"), + GATE_DA(smmu_fimc1, "exynos-sysmmu.6", "smmu_fimc1", "aclk160", + GATE_IP_CAM, 8, 0, 0, "sysmmu"), + GATE_DA(smmu_fimc2, "exynos-sysmmu.7", "smmu_fimc2", "aclk160", + GATE_IP_CAM, 9, 0, 0, "sysmmu"), + GATE_DA(smmu_fimc3, "exynos-sysmmu.8", "smmu_fimc3", "aclk160", + GATE_IP_CAM, 10, 0, 0, "sysmmu"), + GATE_DA(smmu_jpeg, "exynos-sysmmu.3", "smmu_jpeg", "aclk160", + GATE_IP_CAM, 11, 0, 0, "sysmmu"), + GATE(pixelasyncm0, "pxl_async0", "aclk160", GATE_IP_CAM, 17, 0, 0), + GATE(pixelasyncm1, "pxl_async1", "aclk160", GATE_IP_CAM, 18, 0, 0), + GATE_DA(smmu_tv, "exynos-sysmmu.2", "smmu_tv", "aclk160", + GATE_IP_TV, 4, 0, 0, "sysmmu"), + GATE_DA(mfc, "s5p-mfc", "mfc", "aclk100", GATE_IP_MFC, 0, 0, 0, "mfc"), + GATE_DA(smmu_mfcl, "exynos-sysmmu.0", "smmu_mfcl", "aclk100", + GATE_IP_MFC, 1, 0, 0, "sysmmu"), + GATE_DA(smmu_mfcr, "exynos-sysmmu.1", "smmu_mfcr", "aclk100", + GATE_IP_MFC, 2, 0, 0, "sysmmu"), + GATE_DA(fimd0, "exynos4-fb.0", "fimd0", "aclk160", + GATE_IP_LCD0, 0, 0, 0, "fimd"), + GATE_DA(smmu_fimd0, "exynos-sysmmu.10", "smmu_fimd0", "aclk160", + GATE_IP_LCD0, 4, 0, 0, "sysmmu"), + GATE_DA(pdma0, "dma-pl330.0", "pdma0", "aclk133", + GATE_IP_FSYS, 0, 0, 0, "dma"), + GATE_DA(pdma1, "dma-pl330.1", "pdma1", "aclk133", + GATE_IP_FSYS, 1, 0, 0, "dma"), + GATE_DA(sdmmc0, "exynos4-sdhci.0", "sdmmc0", "aclk133", + GATE_IP_FSYS, 5, 0, 0, "hsmmc"), + GATE_DA(sdmmc1, "exynos4-sdhci.1", "sdmmc1", "aclk133", + GATE_IP_FSYS, 6, 0, 0, "hsmmc"), + GATE_DA(sdmmc2, "exynos4-sdhci.2", "sdmmc2", "aclk133", + GATE_IP_FSYS, 7, 0, 0, "hsmmc"), + GATE_DA(sdmmc3, "exynos4-sdhci.3", "sdmmc3", "aclk133", + GATE_IP_FSYS, 8, 0, 0, "hsmmc"), + GATE_DA(uart0, "exynos4210-uart.0", "uart0", "aclk100", + GATE_IP_PERIL, 0, 0, 0, "uart"), + GATE_DA(uart1, "exynos4210-uart.1", "uart1", "aclk100", + GATE_IP_PERIL, 1, 0, 0, "uart"), + GATE_DA(uart2, "exynos4210-uart.2", "uart2", "aclk100", + GATE_IP_PERIL, 2, 0, 0, "uart"), + GATE_DA(uart3, "exynos4210-uart.3", "uart3", "aclk100", + GATE_IP_PERIL, 3, 0, 0, "uart"), + GATE_DA(uart4, "exynos4210-uart.4", "uart4", "aclk100", + GATE_IP_PERIL, 4, 0, 0, "uart"), + GATE_DA(i2c0, "s3c2440-i2c.0", "i2c0", "aclk100", + GATE_IP_PERIL, 6, 0, 0, "i2c"), + GATE_DA(i2c1, "s3c2440-i2c.1", "i2c1", "aclk100", + GATE_IP_PERIL, 7, 0, 0, "i2c"), + GATE_DA(i2c2, "s3c2440-i2c.2", "i2c2", "aclk100", + GATE_IP_PERIL, 8, 0, 0, "i2c"), + GATE_DA(i2c3, "s3c2440-i2c.3", "i2c3", "aclk100", + GATE_IP_PERIL, 9, 0, 0, "i2c"), + GATE_DA(i2c4, "s3c2440-i2c.4", "i2c4", "aclk100", + GATE_IP_PERIL, 10, 0, 0, "i2c"), + GATE_DA(i2c5, "s3c2440-i2c.5", "i2c5", "aclk100", + GATE_IP_PERIL, 11, 0, 0, "i2c"), + GATE_DA(i2c6, "s3c2440-i2c.6", "i2c6", "aclk100", + GATE_IP_PERIL, 12, 0, 0, "i2c"), + GATE_DA(i2c7, "s3c2440-i2c.7", "i2c7", "aclk100", + GATE_IP_PERIL, 13, 0, 0, "i2c"), + GATE_DA(i2c_hdmi, "s3c2440-hdmiphy-i2c", "i2c-hdmi", "aclk100", + GATE_IP_PERIL, 14, 0, 0, "i2c"), + GATE_DA(spi0, "exynos4210-spi.0", "spi0", "aclk100", + GATE_IP_PERIL, 16, 0, 0, "spi"), + GATE_DA(spi1, "exynos4210-spi.1", "spi1", "aclk100", + GATE_IP_PERIL, 17, 0, 0, "spi"), + GATE_DA(spi2, "exynos4210-spi.2", "spi2", "aclk100", + GATE_IP_PERIL, 18, 0, 0, "spi"), + GATE_DA(i2s1, "samsung-i2s.1", "i2s1", "aclk100", + GATE_IP_PERIL, 20, 0, 0, "iis"), + GATE_DA(i2s2, "samsung-i2s.2", "i2s2", "aclk100", + GATE_IP_PERIL, 21, 0, 0, "iis"), + GATE_DA(pcm1, "samsung-pcm.1", "pcm1", "aclk100", + GATE_IP_PERIL, 22, 0, 0, "pcm"), + GATE_DA(pcm2, "samsung-pcm.2", "pcm2", "aclk100", + GATE_IP_PERIL, 23, 0, 0, "pcm"), + GATE_DA(spdif, "samsung-spdif", "spdif", "aclk100", + GATE_IP_PERIL, 26, 0, 0, "spdif"), + GATE_DA(ac97, "samsung-ac97", "ac97", "aclk100", + GATE_IP_PERIL, 27, 0, 0, "ac97"), +}; + +/* list of gate clocks supported in exynos4210 soc */ +struct samsung_gate_clock exynos4210_gate_clks[] __initdata = { + GATE(tvenc, "tvenc", "aclk160", GATE_IP_TV, 2, 0, 0), + GATE(g2d, "g2d", "aclk200", E4210_GATE_IP_IMAGE, 0, 0, 0), + GATE(rotator, "rotator", "aclk200", E4210_GATE_IP_IMAGE, 1, 0, 0), + GATE(mdma, "mdma", "aclk200", E4210_GATE_IP_IMAGE, 2, 0, 0), + GATE(smmu_g2d, "smmu_g2d", "aclk200", E4210_GATE_IP_IMAGE, 3, 0, 0), + GATE(smmu_mdma, "smmu_mdma", "aclk200", E4210_GATE_IP_IMAGE, 5, 0, 0), + GATE(pcie_phy, "pcie_phy", "aclk133", GATE_IP_FSYS, 2, 0, 0), + GATE(sata_phy, "sata_phy", "aclk133", GATE_IP_FSYS, 3, 0, 0), + GATE(sata, "sata", "aclk133", GATE_IP_FSYS, 10, 0, 0), + GATE(pcie, "pcie", "aclk133", GATE_IP_FSYS, 14, 0, 0), + GATE(smmu_pcie, "smmu_pcie", "aclk133", GATE_IP_FSYS, 18, 0, 0), + GATE(modemif, "modemif", "aclk100", GATE_IP_PERIL, 28, 0, 0), + GATE(chipid, "chipid", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0), + GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0), + GATE(hdmi_cec, "hdmi_cec", "aclk100", E4210_GATE_IP_PERIR, 11, 0, 0), + GATE(smmu_rotator, "smmu_rotator", "aclk200", + E4210_GATE_IP_IMAGE, 4, 0, 0), + GATE(sclk_mipi1, "sclk_mipi1", "div_mipi_pre1", + E4210_SRC_MASK_LCD1, 12, CLK_SET_RATE_PARENT, 0), + GATE(sclk_sata, "sclk_sata", "div_sata", + SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), + GATE(sclk_mixer, "sclk_mixer", "mout_mixer", SRC_MASK_TV, 4, 0, 0), + GATE(sclk_dac, "sclk_dac", "mout_dac", SRC_MASK_TV, 8, 0, 0), + GATE_A(tsadc, "tsadc", "aclk100", GATE_IP_PERIL, 15, 0, 0, "adc"), + GATE_A(mct, "mct", "aclk100", E4210_GATE_IP_PERIR, 13, 0, 0, "mct"), + GATE_A(wdt, "watchdog", "aclk100", E4210_GATE_IP_PERIR, 14, 0, 0, "watchdog"), + GATE_A(rtc, "rtc", "aclk100", E4210_GATE_IP_PERIR, 15, 0, 0, "rtc"), + GATE_A(keyif, "keyif", "aclk100", E4210_GATE_IP_PERIR, 16, 0, 0, "keypad"), + GATE_DA(sclk_fimd1, "exynos4-fb.1", "sclk_fimd1", "div_fimd1", + E4210_SRC_MASK_LCD1, 0, CLK_SET_RATE_PARENT, 0, "sclk_fimd"), +}; + +/* list of gate clocks supported in exynos4x12 soc */ +struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = { + GATE(audss, "audss", "sclk_epll", E4X12_GATE_IP_MAUDIO, 0, 0, 0), + GATE(mdnie0, "mdnie0", "aclk160", GATE_IP_LCD0, 2, 0, 0), + GATE(rotator, "rotator", "aclk200", E4X12_GATE_IP_IMAGE, 1, 0, 0), + GATE(mdma2, "mdma2", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0), + GATE(smmu_mdma, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0, 0), + GATE(mipi_hsi, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0), + GATE(chipid, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, 0, 0), + GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, 0, 0), + GATE(hdmi_cec, "hdmi_cec", "aclk100", E4X12_GATE_IP_PERIR, 11, 0, 0), + GATE(sclk_mdnie0, "sclk_mdnie0", "div_mdnie0", + SRC_MASK_LCD0, 4, CLK_SET_RATE_PARENT, 0), + GATE(sclk_mdnie_pwm0, "sclk_mdnie_pwm0", "div_mdnie_pwm_pre0", + SRC_MASK_LCD0, 8, CLK_SET_RATE_PARENT, 0), + GATE(sclk_mipihsi, "sclk_mipihsi", "div_mipihsi", + SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), + GATE(smmu_rotator, "smmu_rotator", "aclk200", + E4X12_GATE_IP_IMAGE, 4, 0, 0), + GATE_A(mct, "mct", "aclk100", E4X12_GATE_IP_PERIR, 13, 0, 0, "mct"), + GATE_A(rtc, "rtc", "aclk100", E4X12_GATE_IP_PERIR, 15, 0, 0, "rtc"), + GATE_A(keyif, "keyif", "aclk100", + E4X12_GATE_IP_PERIR, 16, 0, 0, "keypad"), + GATE(sclk_pwm_isp, "sclk_pwm_isp", "div_pwm_isp", + E4X12_SRC_MASK_ISP, 0, CLK_SET_RATE_PARENT, 0), + GATE(sclk_spi0_isp, "sclk_spi0_isp", "div_spi0_isp_pre", + E4X12_SRC_MASK_ISP, 4, CLK_SET_RATE_PARENT, 0), + GATE(sclk_spi1_isp, "sclk_spi1_isp", "div_spi1_isp_pre", + E4X12_SRC_MASK_ISP, 8, CLK_SET_RATE_PARENT, 0), + GATE(sclk_uart_isp, "sclk_uart_isp", "div_uart_isp", + E4X12_SRC_MASK_ISP, 12, CLK_SET_RATE_PARENT, 0), + GATE(pwm_isp_sclk, "pwm_isp_sclk", "sclk_pwm_isp", + E4X12_GATE_IP_ISP, 0, 0, 0), + GATE(spi0_isp_sclk, "spi0_isp_sclk", "sclk_spi0_isp", + E4X12_GATE_IP_ISP, 1, 0, 0), + GATE(spi1_isp_sclk, "spi1_isp_sclk", "sclk_spi1_isp", + E4X12_GATE_IP_ISP, 2, 0, 0), + GATE(uart_isp_sclk, "uart_isp_sclk", "sclk_uart_isp", + E4X12_GATE_IP_ISP, 3, 0, 0), + GATE_A(wdt, "watchdog", "aclk100", + E4X12_GATE_IP_PERIR, 14, 0, 0, "watchdog"), + GATE_DA(pcm0, "samsung-pcm.0", "pcm0", "aclk100", + E4X12_GATE_IP_MAUDIO, 2, 0, 0, "pcm"), + GATE_DA(i2s0, "samsung-i2s.0", "i2s0", "aclk100", + E4X12_GATE_IP_MAUDIO, 3, 0, 0, "iis"), + GATE(fimc_isp, "isp", "aclk200", E4X12_GATE_ISP0, 0, + CLK_IGNORE_UNUSED, 0), + GATE(fimc_drc, "drc", "aclk200", E4X12_GATE_ISP0, 1, + CLK_IGNORE_UNUSED, 0), + GATE(fimc_fd, "fd", "aclk200", E4X12_GATE_ISP0, 2, + CLK_IGNORE_UNUSED, 0), + GATE(fimc_lite0, "lite0", "aclk200", E4X12_GATE_ISP0, 3, + CLK_IGNORE_UNUSED, 0), + GATE(fimc_lite1, "lite1", "aclk200", E4X12_GATE_ISP0, 4, + CLK_IGNORE_UNUSED, 0), + GATE(mcuisp, "mcuisp", "aclk200", E4X12_GATE_ISP0, 5, + CLK_IGNORE_UNUSED, 0), + GATE(gicisp, "gicisp", "aclk200", E4X12_GATE_ISP0, 7, + CLK_IGNORE_UNUSED, 0), + GATE(smmu_isp, "smmu_isp", "aclk200", E4X12_GATE_ISP0, 8, + CLK_IGNORE_UNUSED, 0), + GATE(smmu_drc, "smmu_drc", "aclk200", E4X12_GATE_ISP0, 9, + CLK_IGNORE_UNUSED, 0), + GATE(smmu_fd, "smmu_fd", "aclk200", E4X12_GATE_ISP0, 10, + CLK_IGNORE_UNUSED, 0), + GATE(smmu_lite0, "smmu_lite0", "aclk200", E4X12_GATE_ISP0, 11, + CLK_IGNORE_UNUSED, 0), + GATE(smmu_lite1, "smmu_lite1", "aclk200", E4X12_GATE_ISP0, 12, + CLK_IGNORE_UNUSED, 0), + GATE(ppmuispmx, "ppmuispmx", "aclk200", E4X12_GATE_ISP0, 20, + CLK_IGNORE_UNUSED, 0), + GATE(ppmuispx, "ppmuispx", "aclk200", E4X12_GATE_ISP0, 21, + CLK_IGNORE_UNUSED, 0), + GATE(mcuctl_isp, "mcuctl_isp", "aclk200", E4X12_GATE_ISP0, 23, + CLK_IGNORE_UNUSED, 0), + GATE(mpwm_isp, "mpwm_isp", "aclk200", E4X12_GATE_ISP0, 24, + CLK_IGNORE_UNUSED, 0), + GATE(i2c0_isp, "i2c0_isp", "aclk200", E4X12_GATE_ISP0, 25, + CLK_IGNORE_UNUSED, 0), + GATE(i2c1_isp, "i2c1_isp", "aclk200", E4X12_GATE_ISP0, 26, + CLK_IGNORE_UNUSED, 0), + GATE(mtcadc_isp, "mtcadc_isp", "aclk200", E4X12_GATE_ISP0, 27, + CLK_IGNORE_UNUSED, 0), + GATE(pwm_isp, "pwm_isp", "aclk200", E4X12_GATE_ISP0, 28, + CLK_IGNORE_UNUSED, 0), + GATE(wdt_isp, "wdt_isp", "aclk200", E4X12_GATE_ISP0, 30, + CLK_IGNORE_UNUSED, 0), + GATE(uart_isp, "uart_isp", "aclk200", E4X12_GATE_ISP0, 31, + CLK_IGNORE_UNUSED, 0), + GATE(asyncaxim, "asyncaxim", "aclk200", E4X12_GATE_ISP1, 0, + CLK_IGNORE_UNUSED, 0), + GATE(smmu_ispcx, "smmu_ispcx", "aclk200", E4X12_GATE_ISP1, 4, + CLK_IGNORE_UNUSED, 0), + GATE(spi0_isp, "spi0_isp", "aclk200", E4X12_GATE_ISP1, 12, + CLK_IGNORE_UNUSED, 0), + GATE(spi1_isp, "spi1_isp", "aclk200", E4X12_GATE_ISP1, 13, + CLK_IGNORE_UNUSED, 0), +}; + +#ifdef CONFIG_OF +static struct of_device_id exynos4_clk_ids[] __initdata = { + { .compatible = "samsung,exynos4210-clock", + .data = (void *)EXYNOS4210, }, + { .compatible = "samsung,exynos4412-clock", + .data = (void *)EXYNOS4X12, }, + { }, +}; +#endif + +/* + * The parent of the fin_pll clock is selected by the XOM[0] bit. This bit + * resides in chipid register space, outside of the clock controller memory + * mapped space. So to determine the parent of fin_pll clock, the chipid + * controller is first remapped and the value of XOM[0] bit is read to + * determine the parent clock. + */ +static void __init exynos4_clk_register_finpll(void) +{ + struct samsung_fixed_rate_clock fclk; + struct device_node *np; + struct clk *clk; + void __iomem *chipid_base = S5P_VA_CHIPID; + unsigned long xom, finpll_f = 24000000; + char *parent_name; + + np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-chipid"); + if (np) + chipid_base = of_iomap(np, 0); + + if (chipid_base) { + xom = readl(chipid_base + 8); + parent_name = xom & 1 ? "xusbxti" : "xxti"; + clk = clk_get(NULL, parent_name); + if (IS_ERR(clk)) { + pr_err("%s: failed to lookup parent clock %s, assuming " + "fin_pll clock frequency is 24MHz\n", __func__, + parent_name); + } else { + finpll_f = clk_get_rate(clk); + } + } else { + pr_err("%s: failed to map chipid registers, assuming " + "fin_pll clock frequency is 24MHz\n", __func__); + } + + fclk.id = fin_pll; + fclk.name = "fin_pll"; + fclk.parent_name = NULL; + fclk.flags = CLK_IS_ROOT; + fclk.fixed_rate = finpll_f; + samsung_clk_register_fixed_rate(&fclk, 1); + + if (np) + iounmap(chipid_base); +} + +/* + * This function allows non-dt platforms to specify the clock speed of the + * xxti and xusbxti clocks. These clocks are then registered with the specified + * clock speed. + */ +void __init exynos4_clk_register_fixed_ext(unsigned long xxti_f, + unsigned long xusbxti_f) +{ + exynos4_fixed_rate_ext_clks[0].fixed_rate = xxti_f; + exynos4_fixed_rate_ext_clks[1].fixed_rate = xusbxti_f; + samsung_clk_register_fixed_rate(exynos4_fixed_rate_ext_clks, + ARRAY_SIZE(exynos4_fixed_rate_ext_clks)); +} + +static __initdata struct of_device_id ext_clk_match[] = { + { .compatible = "samsung,clock-xxti", .data = (void *)0, }, + { .compatible = "samsung,clock-xusbxti", .data = (void *)1, }, + {}, +}; + +/* register exynos4 clocks */ +void __init exynos4_clk_init(struct device_node *np) +{ + void __iomem *reg_base; + struct clk *apll, *mpll, *epll, *vpll; + u32 exynos4_soc; + + if (np) { + const struct of_device_id *match; + match = of_match_node(exynos4_clk_ids, np); + exynos4_soc = (u32)match->data; + + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } else { + reg_base = S5P_VA_CMU; + if (soc_is_exynos4210()) + exynos4_soc = EXYNOS4210; + else if (soc_is_exynos4212() || soc_is_exynos4412()) + exynos4_soc = EXYNOS4X12; + else + panic("%s: unable to determine soc\n", __func__); + } + + if (exynos4_soc == EXYNOS4210) + samsung_clk_init(np, reg_base, nr_clks, + exynos4_clk_regs, ARRAY_SIZE(exynos4_clk_regs), + exynos4210_clk_save, ARRAY_SIZE(exynos4210_clk_save)); + else + samsung_clk_init(np, reg_base, nr_clks, + exynos4_clk_regs, ARRAY_SIZE(exynos4_clk_regs), + exynos4x12_clk_save, ARRAY_SIZE(exynos4x12_clk_save)); + + if (np) + samsung_clk_of_register_fixed_ext(exynos4_fixed_rate_ext_clks, + ARRAY_SIZE(exynos4_fixed_rate_ext_clks), + ext_clk_match); + + exynos4_clk_register_finpll(); + + if (exynos4_soc == EXYNOS4210) { + apll = samsung_clk_register_pll45xx("fout_apll", "fin_pll", + reg_base + APLL_CON0, pll_4508); + mpll = samsung_clk_register_pll45xx("fout_mpll", "fin_pll", + reg_base + E4210_MPLL_CON0, pll_4508); + epll = samsung_clk_register_pll46xx("fout_epll", "fin_pll", + reg_base + EPLL_CON0, pll_4600); + vpll = samsung_clk_register_pll46xx("fout_vpll", "mout_vpllsrc", + reg_base + VPLL_CON0, pll_4650c); + } else { + apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll", + reg_base + APLL_CON0); + mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll", + reg_base + E4X12_MPLL_CON0); + epll = samsung_clk_register_pll36xx("fout_epll", "fin_pll", + reg_base + EPLL_CON0); + vpll = samsung_clk_register_pll36xx("fout_vpll", "fin_pll", + reg_base + VPLL_CON0); + } + + samsung_clk_add_lookup(apll, fout_apll); + samsung_clk_add_lookup(mpll, fout_mpll); + samsung_clk_add_lookup(epll, fout_epll); + samsung_clk_add_lookup(vpll, fout_vpll); + + samsung_clk_register_fixed_rate(exynos4_fixed_rate_clks, + ARRAY_SIZE(exynos4_fixed_rate_clks)); + samsung_clk_register_mux(exynos4_mux_clks, + ARRAY_SIZE(exynos4_mux_clks)); + samsung_clk_register_div(exynos4_div_clks, + ARRAY_SIZE(exynos4_div_clks)); + samsung_clk_register_gate(exynos4_gate_clks, + ARRAY_SIZE(exynos4_gate_clks)); + + if (exynos4_soc == EXYNOS4210) { + samsung_clk_register_fixed_rate(exynos4210_fixed_rate_clks, + ARRAY_SIZE(exynos4210_fixed_rate_clks)); + samsung_clk_register_mux(exynos4210_mux_clks, + ARRAY_SIZE(exynos4210_mux_clks)); + samsung_clk_register_div(exynos4210_div_clks, + ARRAY_SIZE(exynos4210_div_clks)); + samsung_clk_register_gate(exynos4210_gate_clks, + ARRAY_SIZE(exynos4210_gate_clks)); + } else { + samsung_clk_register_mux(exynos4x12_mux_clks, + ARRAY_SIZE(exynos4x12_mux_clks)); + samsung_clk_register_div(exynos4x12_div_clks, + ARRAY_SIZE(exynos4x12_div_clks)); + samsung_clk_register_gate(exynos4x12_gate_clks, + ARRAY_SIZE(exynos4x12_gate_clks)); + } + + pr_info("%s clocks: sclk_apll = %ld, sclk_mpll = %ld\n" + "\tsclk_epll = %ld, sclk_vpll = %ld, arm_clk = %ld\n", + exynos4_soc == EXYNOS4210 ? "Exynos4210" : "Exynos4x12", + _get_rate("sclk_apll"), _get_rate("sclk_mpll"), + _get_rate("sclk_epll"), _get_rate("sclk_vpll"), + _get_rate("arm_clk")); +} +CLK_OF_DECLARE(exynos4210_clk, "samsung,exynos4210-clock", exynos4_clk_init); +CLK_OF_DECLARE(exynos4412_clk, "samsung,exynos4412-clock", exynos4_clk_init); diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c new file mode 100644 index 000000000000..bb54606ff035 --- /dev/null +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -0,0 +1,523 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * Copyright (c) 2013 Linaro Ltd. + * Author: Thomas Abraham <thomas.ab@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for Exynos5250 SoC. +*/ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <plat/cpu.h> +#include "clk.h" +#include "clk-pll.h" + +#define SRC_CPU 0x200 +#define DIV_CPU0 0x500 +#define SRC_CORE1 0x4204 +#define SRC_TOP0 0x10210 +#define SRC_TOP2 0x10218 +#define SRC_GSCL 0x10220 +#define SRC_DISP1_0 0x1022c +#define SRC_MAU 0x10240 +#define SRC_FSYS 0x10244 +#define SRC_GEN 0x10248 +#define SRC_PERIC0 0x10250 +#define SRC_PERIC1 0x10254 +#define SRC_MASK_GSCL 0x10320 +#define SRC_MASK_DISP1_0 0x1032c +#define SRC_MASK_MAU 0x10334 +#define SRC_MASK_FSYS 0x10340 +#define SRC_MASK_GEN 0x10344 +#define SRC_MASK_PERIC0 0x10350 +#define SRC_MASK_PERIC1 0x10354 +#define DIV_TOP0 0x10510 +#define DIV_TOP1 0x10514 +#define DIV_GSCL 0x10520 +#define DIV_DISP1_0 0x1052c +#define DIV_GEN 0x1053c +#define DIV_MAU 0x10544 +#define DIV_FSYS0 0x10548 +#define DIV_FSYS1 0x1054c +#define DIV_FSYS2 0x10550 +#define DIV_PERIC0 0x10558 +#define DIV_PERIC1 0x1055c +#define DIV_PERIC2 0x10560 +#define DIV_PERIC3 0x10564 +#define DIV_PERIC4 0x10568 +#define DIV_PERIC5 0x1056c +#define GATE_IP_GSCL 0x10920 +#define GATE_IP_MFC 0x1092c +#define GATE_IP_GEN 0x10934 +#define GATE_IP_FSYS 0x10944 +#define GATE_IP_PERIC 0x10950 +#define GATE_IP_PERIS 0x10960 +#define SRC_CDREX 0x20200 +#define PLL_DIV2_SEL 0x20a24 +#define GATE_IP_DISP1 0x10928 + +/* + * Let each supported clock get a unique id. This id is used to lookup the clock + * for device tree based platforms. The clocks are categorized into three + * sections: core, sclk gate and bus interface gate clocks. + * + * When adding a new clock to this list, it is advised to choose a clock + * category and add it to the end of that category. That is because the the + * device tree source file is referring to these ids and any change in the + * sequence number of existing clocks will require corresponding change in the + * device tree files. This limitation would go away when pre-processor support + * for dtc would be available. + */ +enum exynos5250_clks { + none, + + /* core clocks */ + fin_pll, + + /* gate for special clocks (sclk) */ + sclk_cam_bayer = 128, sclk_cam0, sclk_cam1, sclk_gscl_wa, sclk_gscl_wb, + sclk_fimd1, sclk_mipi1, sclk_dp, sclk_hdmi, sclk_pixel, sclk_audio0, + sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_sata, sclk_usb3, + sclk_jpeg, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_pwm, + sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2, + + /* gate clocks */ + gscl0 = 256, gscl1, gscl2, gscl3, gscl_wa, gscl_wb, smmu_gscl0, + smmu_gscl1, smmu_gscl2, smmu_gscl3, mfc, smmu_mfcl, smmu_mfcr, rotator, + jpeg, mdma1, smmu_rotator, smmu_jpeg, smmu_mdma1, pdma0, pdma1, sata, + usbotg, mipi_hsi, sdmmc0, sdmmc1, sdmmc2, sdmmc3, sromc, usb2, usb3, + sata_phyctrl, sata_phyi2c, uart0, uart1, uart2, uart3, uart4, i2c0, + i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c_hdmi, adc, spi0, spi1, + spi2, i2s1, i2s2, pcm1, pcm2, pwm, spdif, ac97, hsi2c0, hsi2c1, hsi2c2, + hsi2c3, chipid, sysreg, pmu, cmu_top, cmu_core, cmu_mem, tzpc0, tzpc1, + tzpc2, tzpc3, tzpc4, tzpc5, tzpc6, tzpc7, tzpc8, tzpc9, hdmi_cec, mct, + wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi, + + nr_clks, +}; + +/* + * list of controller registers to be saved and restored during a + * suspend/resume cycle. + */ +static __initdata unsigned long exynos5250_clk_regs[] = { + SRC_CPU, + DIV_CPU0, + SRC_CORE1, + SRC_TOP0, + SRC_TOP2, + SRC_GSCL, + SRC_DISP1_0, + SRC_MAU, + SRC_FSYS, + SRC_GEN, + SRC_PERIC0, + SRC_PERIC1, + SRC_MASK_GSCL, + SRC_MASK_DISP1_0, + SRC_MASK_MAU, + SRC_MASK_FSYS, + SRC_MASK_GEN, + SRC_MASK_PERIC0, + SRC_MASK_PERIC1, + DIV_TOP0, + DIV_TOP1, + DIV_GSCL, + DIV_DISP1_0, + DIV_GEN, + DIV_MAU, + DIV_FSYS0, + DIV_FSYS1, + DIV_FSYS2, + DIV_PERIC0, + DIV_PERIC1, + DIV_PERIC2, + DIV_PERIC3, + DIV_PERIC4, + DIV_PERIC5, + GATE_IP_GSCL, + GATE_IP_MFC, + GATE_IP_GEN, + GATE_IP_FSYS, + GATE_IP_PERIC, + GATE_IP_PERIS, + SRC_CDREX, + PLL_DIV2_SEL, + GATE_IP_DISP1, +}; + +/* list of all parent clock list */ +PNAME(mout_apll_p) = { "fin_pll", "fout_apll", }; +PNAME(mout_cpu_p) = { "mout_apll", "mout_mpll", }; +PNAME(mout_mpll_fout_p) = { "fout_mplldiv2", "fout_mpll" }; +PNAME(mout_mpll_p) = { "fin_pll", "mout_mpll_fout" }; +PNAME(mout_bpll_fout_p) = { "fout_bplldiv2", "fout_bpll" }; +PNAME(mout_bpll_p) = { "fin_pll", "mout_bpll_fout" }; +PNAME(mout_vpllsrc_p) = { "fin_pll", "sclk_hdmi27m" }; +PNAME(mout_vpll_p) = { "mout_vpllsrc", "fout_vpll" }; +PNAME(mout_cpll_p) = { "fin_pll", "fout_cpll" }; +PNAME(mout_epll_p) = { "fin_pll", "fout_epll" }; +PNAME(mout_mpll_user_p) = { "fin_pll", "sclk_mpll" }; +PNAME(mout_bpll_user_p) = { "fin_pll", "sclk_bpll" }; +PNAME(mout_aclk166_p) = { "sclk_cpll", "sclk_mpll_user" }; +PNAME(mout_aclk200_p) = { "sclk_mpll_user", "sclk_bpll_user" }; +PNAME(mout_hdmi_p) = { "div_hdmi_pixel", "sclk_hdmiphy" }; +PNAME(mout_usb3_p) = { "sclk_mpll_user", "sclk_cpll" }; +PNAME(mout_group1_p) = { "fin_pll", "fin_pll", "sclk_hdmi27m", + "sclk_dptxphy", "sclk_uhostphy", "sclk_hdmiphy", + "sclk_mpll_user", "sclk_epll", "sclk_vpll", + "sclk_cpll" }; +PNAME(mout_audio0_p) = { "cdclk0", "fin_pll", "sclk_hdmi27m", "sclk_dptxphy", + "sclk_uhostphy", "sclk_hdmiphy", + "sclk_mpll_user", "sclk_epll", "sclk_vpll", + "sclk_cpll" }; +PNAME(mout_audio1_p) = { "cdclk1", "fin_pll", "sclk_hdmi27m", "sclk_dptxphy", + "sclk_uhostphy", "sclk_hdmiphy", + "sclk_mpll_user", "sclk_epll", "sclk_vpll", + "sclk_cpll" }; +PNAME(mout_audio2_p) = { "cdclk2", "fin_pll", "sclk_hdmi27m", "sclk_dptxphy", + "sclk_uhostphy", "sclk_hdmiphy", + "sclk_mpll_user", "sclk_epll", "sclk_vpll", + "sclk_cpll" }; +PNAME(mout_spdif_p) = { "sclk_audio0", "sclk_audio1", "sclk_audio2", + "spdif_extclk" }; + +/* fixed rate clocks generated outside the soc */ +struct samsung_fixed_rate_clock exynos5250_fixed_rate_ext_clks[] __initdata = { + FRATE(fin_pll, "fin_pll", NULL, CLK_IS_ROOT, 0), +}; + +/* fixed rate clocks generated inside the soc */ +struct samsung_fixed_rate_clock exynos5250_fixed_rate_clks[] __initdata = { + FRATE(none, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 24000000), + FRATE(none, "sclk_hdmi27m", NULL, CLK_IS_ROOT, 27000000), + FRATE(none, "sclk_dptxphy", NULL, CLK_IS_ROOT, 24000000), + FRATE(none, "sclk_uhostphy", NULL, CLK_IS_ROOT, 48000000), +}; + +struct samsung_fixed_factor_clock exynos5250_fixed_factor_clks[] __initdata = { + FFACTOR(none, "fout_mplldiv2", "fout_mpll", 1, 2, 0), + FFACTOR(none, "fout_bplldiv2", "fout_bpll", 1, 2, 0), +}; + +struct samsung_mux_clock exynos5250_mux_clks[] __initdata = { + MUX(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1), + MUX(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1), + MUX(none, "mout_mpll_fout", mout_mpll_fout_p, PLL_DIV2_SEL, 4, 1), + MUX(none, "sclk_mpll", mout_mpll_p, SRC_CORE1, 8, 1), + MUX(none, "mout_bpll_fout", mout_bpll_fout_p, PLL_DIV2_SEL, 0, 1), + MUX(none, "sclk_bpll", mout_bpll_p, SRC_CDREX, 0, 1), + MUX(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP2, 0, 1), + MUX(none, "sclk_vpll", mout_vpll_p, SRC_TOP2, 16, 1), + MUX(none, "sclk_epll", mout_epll_p, SRC_TOP2, 12, 1), + MUX(none, "sclk_cpll", mout_cpll_p, SRC_TOP2, 8, 1), + MUX(none, "sclk_mpll_user", mout_mpll_user_p, SRC_TOP2, 20, 1), + MUX(none, "sclk_bpll_user", mout_bpll_user_p, SRC_TOP2, 24, 1), + MUX(none, "mout_aclk166", mout_aclk166_p, SRC_TOP0, 8, 1), + MUX(none, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1), + MUX(none, "mout_aclk200", mout_aclk200_p, SRC_TOP0, 12, 1), + MUX(none, "mout_cam_bayer", mout_group1_p, SRC_GSCL, 12, 4), + MUX(none, "mout_cam0", mout_group1_p, SRC_GSCL, 16, 4), + MUX(none, "mout_cam1", mout_group1_p, SRC_GSCL, 20, 4), + MUX(none, "mout_gscl_wa", mout_group1_p, SRC_GSCL, 24, 4), + MUX(none, "mout_gscl_wb", mout_group1_p, SRC_GSCL, 28, 4), + MUX(none, "mout_fimd1", mout_group1_p, SRC_DISP1_0, 0, 4), + MUX(none, "mout_mipi1", mout_group1_p, SRC_DISP1_0, 12, 4), + MUX(none, "mout_dp", mout_group1_p, SRC_DISP1_0, 16, 4), + MUX(none, "mout_hdmi", mout_hdmi_p, SRC_DISP1_0, 20, 1), + MUX(none, "mout_audio0", mout_audio0_p, SRC_MAU, 0, 4), + MUX(none, "mout_mmc0", mout_group1_p, SRC_FSYS, 0, 4), + MUX(none, "mout_mmc1", mout_group1_p, SRC_FSYS, 4, 4), + MUX(none, "mout_mmc2", mout_group1_p, SRC_FSYS, 8, 4), + MUX(none, "mout_mmc3", mout_group1_p, SRC_FSYS, 12, 4), + MUX(none, "mout_sata", mout_aclk200_p, SRC_FSYS, 24, 1), + MUX(none, "mout_usb3", mout_usb3_p, SRC_FSYS, 28, 1), + MUX(none, "mout_jpeg", mout_group1_p, SRC_GEN, 0, 4), + MUX(none, "mout_uart0", mout_group1_p, SRC_PERIC0, 0, 4), + MUX(none, "mout_uart1", mout_group1_p, SRC_PERIC0, 4, 4), + MUX(none, "mout_uart2", mout_group1_p, SRC_PERIC0, 8, 4), + MUX(none, "mout_uart3", mout_group1_p, SRC_PERIC0, 12, 4), + MUX(none, "mout_pwm", mout_group1_p, SRC_PERIC0, 24, 4), + MUX(none, "mout_audio1", mout_audio1_p, SRC_PERIC1, 0, 4), + MUX(none, "mout_audio2", mout_audio2_p, SRC_PERIC1, 4, 4), + MUX(none, "mout_spdif", mout_spdif_p, SRC_PERIC1, 8, 2), + MUX(none, "mout_spi0", mout_group1_p, SRC_PERIC1, 16, 4), + MUX(none, "mout_spi1", mout_group1_p, SRC_PERIC1, 20, 4), + MUX(none, "mout_spi2", mout_group1_p, SRC_PERIC1, 24, 4), +}; + +struct samsung_div_clock exynos5250_div_clks[] __initdata = { + DIV(none, "div_arm", "mout_cpu", DIV_CPU0, 0, 3), + DIV(none, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3), + DIV(none, "aclk66_pre", "sclk_mpll_user", DIV_TOP1, 24, 3), + DIV(none, "aclk66", "aclk66_pre", DIV_TOP0, 0, 3), + DIV(none, "aclk266", "sclk_mpll_user", DIV_TOP0, 16, 3), + DIV(none, "aclk166", "mout_aclk166", DIV_TOP0, 8, 3), + DIV(none, "aclk333", "mout_aclk333", DIV_TOP0, 20, 3), + DIV(none, "aclk200", "mout_aclk200", DIV_TOP0, 12, 3), + DIV(none, "div_cam_bayer", "mout_cam_bayer", DIV_GSCL, 12, 4), + DIV(none, "div_cam0", "mout_cam0", DIV_GSCL, 16, 4), + DIV(none, "div_cam1", "mout_cam1", DIV_GSCL, 20, 4), + DIV(none, "div_gscl_wa", "mout_gscl_wa", DIV_GSCL, 24, 4), + DIV(none, "div_gscl_wb", "mout_gscl_wb", DIV_GSCL, 28, 4), + DIV(none, "div_fimd1", "mout_fimd1", DIV_DISP1_0, 0, 4), + DIV(none, "div_mipi1", "mout_mipi1", DIV_DISP1_0, 16, 4), + DIV(none, "div_dp", "mout_dp", DIV_DISP1_0, 24, 4), + DIV(none, "div_jpeg", "mout_jpeg", DIV_GEN, 4, 4), + DIV(none, "div_audio0", "mout_audio0", DIV_MAU, 0, 4), + DIV(none, "div_pcm0", "sclk_audio0", DIV_MAU, 4, 8), + DIV(none, "div_sata", "mout_sata", DIV_FSYS0, 20, 4), + DIV(none, "div_usb3", "mout_usb3", DIV_FSYS0, 24, 4), + DIV(none, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4), + DIV(none, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4), + DIV(none, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4), + DIV(none, "div_mmc3", "mout_mmc3", DIV_FSYS2, 16, 4), + DIV(none, "div_uart0", "mout_uart0", DIV_PERIC0, 0, 4), + DIV(none, "div_uart1", "mout_uart1", DIV_PERIC0, 4, 4), + DIV(none, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4), + DIV(none, "div_uart3", "mout_uart3", DIV_PERIC0, 12, 4), + DIV(none, "div_spi0", "mout_spi0", DIV_PERIC1, 0, 4), + DIV(none, "div_spi1", "mout_spi1", DIV_PERIC1, 16, 4), + DIV(none, "div_spi2", "mout_spi2", DIV_PERIC2, 0, 4), + DIV(none, "div_pwm", "mout_pwm", DIV_PERIC3, 0, 4), + DIV(none, "div_audio1", "mout_audio1", DIV_PERIC4, 0, 4), + DIV(none, "div_pcm1", "sclk_audio1", DIV_PERIC4, 4, 8), + DIV(none, "div_audio2", "mout_audio2", DIV_PERIC4, 16, 4), + DIV(none, "div_pcm2", "sclk_audio2", DIV_PERIC4, 20, 8), + DIV(none, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6), + DIV(none, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6), + DIV(sclk_pixel, "div_hdmi_pixel", "sclk_vpll", DIV_DISP1_0, 28, 4), + DIV_A(none, "armclk", "div_arm", DIV_CPU0, 28, 3, "armclk"), + DIV_F(none, "div_mipi1_pre", "div_mipi1", + DIV_DISP1_0, 20, 4, CLK_SET_RATE_PARENT, 0), + DIV_F(none, "div_mmc_pre0", "div_mmc0", + DIV_FSYS1, 8, 8, CLK_SET_RATE_PARENT, 0), + DIV_F(none, "div_mmc_pre1", "div_mmc1", + DIV_FSYS1, 24, 8, CLK_SET_RATE_PARENT, 0), + DIV_F(none, "div_mmc_pre2", "div_mmc2", + DIV_FSYS2, 8, 8, CLK_SET_RATE_PARENT, 0), + DIV_F(none, "div_mmc_pre3", "div_mmc3", + DIV_FSYS2, 24, 8, CLK_SET_RATE_PARENT, 0), + DIV_F(none, "div_spi_pre0", "div_spi0", + DIV_PERIC1, 8, 8, CLK_SET_RATE_PARENT, 0), + DIV_F(none, "div_spi_pre1", "div_spi1", + DIV_PERIC1, 24, 8, CLK_SET_RATE_PARENT, 0), + DIV_F(none, "div_spi_pre2", "div_spi2", + DIV_PERIC2, 8, 8, CLK_SET_RATE_PARENT, 0), +}; + +struct samsung_gate_clock exynos5250_gate_clks[] __initdata = { + GATE(gscl0, "gscl0", "none", GATE_IP_GSCL, 0, 0, 0), + GATE(gscl1, "gscl1", "none", GATE_IP_GSCL, 1, 0, 0), + GATE(gscl2, "gscl2", "aclk266", GATE_IP_GSCL, 2, 0, 0), + GATE(gscl3, "gscl3", "aclk266", GATE_IP_GSCL, 3, 0, 0), + GATE(gscl_wa, "gscl_wa", "div_gscl_wa", GATE_IP_GSCL, 5, 0, 0), + GATE(gscl_wb, "gscl_wb", "div_gscl_wb", GATE_IP_GSCL, 6, 0, 0), + GATE(smmu_gscl0, "smmu_gscl0", "aclk266", GATE_IP_GSCL, 7, 0, 0), + GATE(smmu_gscl1, "smmu_gscl1", "aclk266", GATE_IP_GSCL, 8, 0, 0), + GATE(smmu_gscl2, "smmu_gscl2", "aclk266", GATE_IP_GSCL, 9, 0, 0), + GATE(smmu_gscl3, "smmu_gscl3", "aclk266", GATE_IP_GSCL, 10, 0, 0), + GATE(mfc, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0), + GATE(smmu_mfcl, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0), + GATE(smmu_mfcr, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0), + GATE(rotator, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0), + GATE(jpeg, "jpeg", "aclk166", GATE_IP_GEN, 2, 0, 0), + GATE(mdma1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0), + GATE(smmu_rotator, "smmu_rotator", "aclk266", GATE_IP_GEN, 6, 0, 0), + GATE(smmu_jpeg, "smmu_jpeg", "aclk166", GATE_IP_GEN, 7, 0, 0), + GATE(smmu_mdma1, "smmu_mdma1", "aclk266", GATE_IP_GEN, 9, 0, 0), + GATE(pdma0, "pdma0", "aclk200", GATE_IP_FSYS, 1, 0, 0), + GATE(pdma1, "pdma1", "aclk200", GATE_IP_FSYS, 2, 0, 0), + GATE(sata, "sata", "aclk200", GATE_IP_FSYS, 6, 0, 0), + GATE(usbotg, "usbotg", "aclk200", GATE_IP_FSYS, 7, 0, 0), + GATE(mipi_hsi, "mipi_hsi", "aclk200", GATE_IP_FSYS, 8, 0, 0), + GATE(sdmmc0, "sdmmc0", "aclk200", GATE_IP_FSYS, 12, 0, 0), + GATE(sdmmc1, "sdmmc1", "aclk200", GATE_IP_FSYS, 13, 0, 0), + GATE(sdmmc2, "sdmmc2", "aclk200", GATE_IP_FSYS, 14, 0, 0), + GATE(sdmmc3, "sdmmc3", "aclk200", GATE_IP_FSYS, 15, 0, 0), + GATE(sromc, "sromc", "aclk200", GATE_IP_FSYS, 17, 0, 0), + GATE(usb2, "usb2", "aclk200", GATE_IP_FSYS, 18, 0, 0), + GATE(usb3, "usb3", "aclk200", GATE_IP_FSYS, 19, 0, 0), + GATE(sata_phyctrl, "sata_phyctrl", "aclk200", GATE_IP_FSYS, 24, 0, 0), + GATE(sata_phyi2c, "sata_phyi2c", "aclk200", GATE_IP_FSYS, 25, 0, 0), + GATE(uart0, "uart0", "aclk66", GATE_IP_PERIC, 0, 0, 0), + GATE(uart1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0), + GATE(uart2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0), + GATE(uart3, "uart3", "aclk66", GATE_IP_PERIC, 3, 0, 0), + GATE(uart4, "uart4", "aclk66", GATE_IP_PERIC, 4, 0, 0), + GATE(i2c0, "i2c0", "aclk66", GATE_IP_PERIC, 6, 0, 0), + GATE(i2c1, "i2c1", "aclk66", GATE_IP_PERIC, 7, 0, 0), + GATE(i2c2, "i2c2", "aclk66", GATE_IP_PERIC, 8, 0, 0), + GATE(i2c3, "i2c3", "aclk66", GATE_IP_PERIC, 9, 0, 0), + GATE(i2c4, "i2c4", "aclk66", GATE_IP_PERIC, 10, 0, 0), + GATE(i2c5, "i2c5", "aclk66", GATE_IP_PERIC, 11, 0, 0), + GATE(i2c6, "i2c6", "aclk66", GATE_IP_PERIC, 12, 0, 0), + GATE(i2c7, "i2c7", "aclk66", GATE_IP_PERIC, 13, 0, 0), + GATE(i2c_hdmi, "i2c_hdmi", "aclk66", GATE_IP_PERIC, 14, 0, 0), + GATE(adc, "adc", "aclk66", GATE_IP_PERIC, 15, 0, 0), + GATE(spi0, "spi0", "aclk66", GATE_IP_PERIC, 16, 0, 0), + GATE(spi1, "spi1", "aclk66", GATE_IP_PERIC, 17, 0, 0), + GATE(spi2, "spi2", "aclk66", GATE_IP_PERIC, 18, 0, 0), + GATE(i2s1, "i2s1", "aclk66", GATE_IP_PERIC, 20, 0, 0), + GATE(i2s2, "i2s2", "aclk66", GATE_IP_PERIC, 21, 0, 0), + GATE(pcm1, "pcm1", "aclk66", GATE_IP_PERIC, 22, 0, 0), + GATE(pcm2, "pcm2", "aclk66", GATE_IP_PERIC, 23, 0, 0), + GATE(pwm, "pwm", "aclk66", GATE_IP_PERIC, 24, 0, 0), + GATE(spdif, "spdif", "aclk66", GATE_IP_PERIC, 26, 0, 0), + GATE(ac97, "ac97", "aclk66", GATE_IP_PERIC, 27, 0, 0), + GATE(hsi2c0, "hsi2c0", "aclk66", GATE_IP_PERIC, 28, 0, 0), + GATE(hsi2c1, "hsi2c1", "aclk66", GATE_IP_PERIC, 29, 0, 0), + GATE(hsi2c2, "hsi2c2", "aclk66", GATE_IP_PERIC, 30, 0, 0), + GATE(hsi2c3, "hsi2c3", "aclk66", GATE_IP_PERIC, 31, 0, 0), + GATE(chipid, "chipid", "aclk66", GATE_IP_PERIS, 0, 0, 0), + GATE(sysreg, "sysreg", "aclk66", GATE_IP_PERIS, 1, 0, 0), + GATE(pmu, "pmu", "aclk66", GATE_IP_PERIS, 2, 0, 0), + GATE(tzpc0, "tzpc0", "aclk66", GATE_IP_PERIS, 6, 0, 0), + GATE(tzpc1, "tzpc1", "aclk66", GATE_IP_PERIS, 7, 0, 0), + GATE(tzpc2, "tzpc2", "aclk66", GATE_IP_PERIS, 8, 0, 0), + GATE(tzpc3, "tzpc3", "aclk66", GATE_IP_PERIS, 9, 0, 0), + GATE(tzpc4, "tzpc4", "aclk66", GATE_IP_PERIS, 10, 0, 0), + GATE(tzpc5, "tzpc5", "aclk66", GATE_IP_PERIS, 11, 0, 0), + GATE(tzpc6, "tzpc6", "aclk66", GATE_IP_PERIS, 12, 0, 0), + GATE(tzpc7, "tzpc7", "aclk66", GATE_IP_PERIS, 13, 0, 0), + GATE(tzpc8, "tzpc8", "aclk66", GATE_IP_PERIS, 14, 0, 0), + GATE(tzpc9, "tzpc9", "aclk66", GATE_IP_PERIS, 15, 0, 0), + GATE(hdmi_cec, "hdmi_cec", "aclk66", GATE_IP_PERIS, 16, 0, 0), + GATE(mct, "mct", "aclk66", GATE_IP_PERIS, 18, 0, 0), + GATE(wdt, "wdt", "aclk66", GATE_IP_PERIS, 19, 0, 0), + GATE(rtc, "rtc", "aclk66", GATE_IP_PERIS, 20, 0, 0), + GATE(tmu, "tmu", "aclk66", GATE_IP_PERIS, 21, 0, 0), + GATE(cmu_top, "cmu_top", "aclk66", + GATE_IP_PERIS, 3, CLK_IGNORE_UNUSED, 0), + GATE(cmu_core, "cmu_core", "aclk66", + GATE_IP_PERIS, 4, CLK_IGNORE_UNUSED, 0), + GATE(cmu_mem, "cmu_mem", "aclk66", + GATE_IP_PERIS, 5, CLK_IGNORE_UNUSED, 0), + GATE(sclk_cam_bayer, "sclk_cam_bayer", "div_cam_bayer", + SRC_MASK_GSCL, 12, CLK_SET_RATE_PARENT, 0), + GATE(sclk_cam0, "sclk_cam0", "div_cam0", + SRC_MASK_GSCL, 16, CLK_SET_RATE_PARENT, 0), + GATE(sclk_cam1, "sclk_cam1", "div_cam1", + SRC_MASK_GSCL, 20, CLK_SET_RATE_PARENT, 0), + GATE(sclk_gscl_wa, "sclk_gscl_wa", "div_gscl_wa", + SRC_MASK_GSCL, 24, CLK_SET_RATE_PARENT, 0), + GATE(sclk_gscl_wb, "sclk_gscl_wb", "div_gscl_wb", + SRC_MASK_GSCL, 28, CLK_SET_RATE_PARENT, 0), + GATE(sclk_fimd1, "sclk_fimd1", "div_fimd1", + SRC_MASK_DISP1_0, 0, CLK_SET_RATE_PARENT, 0), + GATE(sclk_mipi1, "sclk_mipi1", "div_mipi1", + SRC_MASK_DISP1_0, 12, CLK_SET_RATE_PARENT, 0), + GATE(sclk_dp, "sclk_dp", "div_dp", + SRC_MASK_DISP1_0, 16, CLK_SET_RATE_PARENT, 0), + GATE(sclk_hdmi, "sclk_hdmi", "mout_hdmi", + SRC_MASK_DISP1_0, 20, 0, 0), + GATE(sclk_audio0, "sclk_audio0", "div_audio0", + SRC_MASK_MAU, 0, CLK_SET_RATE_PARENT, 0), + GATE(sclk_mmc0, "sclk_mmc0", "div_mmc_pre0", + SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0), + GATE(sclk_mmc1, "sclk_mmc1", "div_mmc_pre1", + SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0), + GATE(sclk_mmc2, "sclk_mmc2", "div_mmc_pre2", + SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0), + GATE(sclk_mmc3, "sclk_mmc3", "div_mmc_pre3", + SRC_MASK_FSYS, 12, CLK_SET_RATE_PARENT, 0), + GATE(sclk_sata, "sclk_sata", "div_sata", + SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0), + GATE(sclk_usb3, "sclk_usb3", "div_usb3", + SRC_MASK_FSYS, 28, CLK_SET_RATE_PARENT, 0), + GATE(sclk_jpeg, "sclk_jpeg", "div_jpeg", + SRC_MASK_GEN, 0, CLK_SET_RATE_PARENT, 0), + GATE(sclk_uart0, "sclk_uart0", "div_uart0", + SRC_MASK_PERIC0, 0, CLK_SET_RATE_PARENT, 0), + GATE(sclk_uart1, "sclk_uart1", "div_uart1", + SRC_MASK_PERIC0, 4, CLK_SET_RATE_PARENT, 0), + GATE(sclk_uart2, "sclk_uart2", "div_uart2", + SRC_MASK_PERIC0, 8, CLK_SET_RATE_PARENT, 0), + GATE(sclk_uart3, "sclk_uart3", "div_uart3", + SRC_MASK_PERIC0, 12, CLK_SET_RATE_PARENT, 0), + GATE(sclk_pwm, "sclk_pwm", "div_pwm", + SRC_MASK_PERIC0, 24, CLK_SET_RATE_PARENT, 0), + GATE(sclk_audio1, "sclk_audio1", "div_audio1", + SRC_MASK_PERIC1, 0, CLK_SET_RATE_PARENT, 0), + GATE(sclk_audio2, "sclk_audio2", "div_audio2", + SRC_MASK_PERIC1, 4, CLK_SET_RATE_PARENT, 0), + GATE(sclk_spdif, "sclk_spdif", "mout_spdif", + SRC_MASK_PERIC1, 4, 0, 0), + GATE(sclk_spi0, "sclk_spi0", "div_spi_pre0", + SRC_MASK_PERIC1, 16, CLK_SET_RATE_PARENT, 0), + GATE(sclk_spi1, "sclk_spi1", "div_spi_pre1", + SRC_MASK_PERIC1, 20, CLK_SET_RATE_PARENT, 0), + GATE(sclk_spi2, "sclk_spi2", "div_spi_pre2", + SRC_MASK_PERIC1, 24, CLK_SET_RATE_PARENT, 0), + GATE(fimd1, "fimd1", "aclk200", GATE_IP_DISP1, 0, 0, 0), + GATE(mie1, "mie1", "aclk200", GATE_IP_DISP1, 1, 0, 0), + GATE(dsim0, "dsim0", "aclk200", GATE_IP_DISP1, 3, 0, 0), + GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0), + GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0), + GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0), +}; + +static __initdata struct of_device_id ext_clk_match[] = { + { .compatible = "samsung,clock-xxti", .data = (void *)0, }, + { }, +}; + +/* register exynox5250 clocks */ +void __init exynos5250_clk_init(struct device_node *np) +{ + void __iomem *reg_base; + struct clk *apll, *mpll, *epll, *vpll, *bpll, *gpll, *cpll; + + if (np) { + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + } else { + panic("%s: unable to determine soc\n", __func__); + } + + samsung_clk_init(np, reg_base, nr_clks, + exynos5250_clk_regs, ARRAY_SIZE(exynos5250_clk_regs), + NULL, 0); + samsung_clk_of_register_fixed_ext(exynos5250_fixed_rate_ext_clks, + ARRAY_SIZE(exynos5250_fixed_rate_ext_clks), + ext_clk_match); + + apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll", + reg_base + 0x100); + mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll", + reg_base + 0x4100); + bpll = samsung_clk_register_pll35xx("fout_bpll", "fin_pll", + reg_base + 0x20110); + gpll = samsung_clk_register_pll35xx("fout_gpll", "fin_pll", + reg_base + 0x10150); + cpll = samsung_clk_register_pll35xx("fout_cpll", "fin_pll", + reg_base + 0x10120); + epll = samsung_clk_register_pll36xx("fout_epll", "fin_pll", + reg_base + 0x10130); + vpll = samsung_clk_register_pll36xx("fout_vpll", "mout_vpllsrc", + reg_base + 0x10140); + + samsung_clk_register_fixed_rate(exynos5250_fixed_rate_clks, + ARRAY_SIZE(exynos5250_fixed_rate_clks)); + samsung_clk_register_fixed_factor(exynos5250_fixed_factor_clks, + ARRAY_SIZE(exynos5250_fixed_factor_clks)); + samsung_clk_register_mux(exynos5250_mux_clks, + ARRAY_SIZE(exynos5250_mux_clks)); + samsung_clk_register_div(exynos5250_div_clks, + ARRAY_SIZE(exynos5250_div_clks)); + samsung_clk_register_gate(exynos5250_gate_clks, + ARRAY_SIZE(exynos5250_gate_clks)); + + pr_info("Exynos5250: clock setup completed, armclk=%ld\n", + _get_rate("armclk")); +} +CLK_OF_DECLARE(exynos5250_clk, "samsung,exynos5250-clock", exynos5250_clk_init); diff --git a/drivers/clk/samsung/clk-exynos5440.c b/drivers/clk/samsung/clk-exynos5440.c new file mode 100644 index 000000000000..a0a094c06f19 --- /dev/null +++ b/drivers/clk/samsung/clk-exynos5440.c @@ -0,0 +1,139 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * Author: Thomas Abraham <thomas.ab@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for Exynos5440 SoC. +*/ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <plat/cpu.h> +#include "clk.h" +#include "clk-pll.h" + +#define CLKEN_OV_VAL 0xf8 +#define CPU_CLK_STATUS 0xfc +#define MISC_DOUT1 0x558 + +/* + * Let each supported clock get a unique id. This id is used to lookup the clock + * for device tree based platforms. + */ +enum exynos5440_clks { + none, xtal, arm_clk, + + spi_baud = 16, pb0_250, pr0_250, pr1_250, b_250, b_125, b_200, sata, + usb, gmac0, cs250, pb0_250_o, pr0_250_o, pr1_250_o, b_250_o, b_125_o, + b_200_o, sata_o, usb_o, gmac0_o, cs250_o, + + nr_clks, +}; + +/* parent clock name list */ +PNAME(mout_armclk_p) = { "cplla", "cpllb" }; +PNAME(mout_spi_p) = { "div125", "div200" }; + +/* fixed rate clocks generated outside the soc */ +struct samsung_fixed_rate_clock exynos5440_fixed_rate_ext_clks[] __initdata = { + FRATE(none, "xtal", NULL, CLK_IS_ROOT, 0), +}; + +/* fixed rate clocks */ +struct samsung_fixed_rate_clock exynos5440_fixed_rate_clks[] __initdata = { + FRATE(none, "ppll", NULL, CLK_IS_ROOT, 1000000000), + FRATE(none, "usb_phy0", NULL, CLK_IS_ROOT, 60000000), + FRATE(none, "usb_phy1", NULL, CLK_IS_ROOT, 60000000), + FRATE(none, "usb_ohci12", NULL, CLK_IS_ROOT, 12000000), + FRATE(none, "usb_ohci48", NULL, CLK_IS_ROOT, 48000000), +}; + +/* fixed factor clocks */ +struct samsung_fixed_factor_clock exynos5440_fixed_factor_clks[] __initdata = { + FFACTOR(none, "div250", "ppll", 1, 4, 0), + FFACTOR(none, "div200", "ppll", 1, 5, 0), + FFACTOR(none, "div125", "div250", 1, 2, 0), +}; + +/* mux clocks */ +struct samsung_mux_clock exynos5440_mux_clks[] __initdata = { + MUX(none, "mout_spi", mout_spi_p, MISC_DOUT1, 5, 1), + MUX_A(arm_clk, "arm_clk", mout_armclk_p, + CPU_CLK_STATUS, 0, 1, "armclk"), +}; + +/* divider clocks */ +struct samsung_div_clock exynos5440_div_clks[] __initdata = { + DIV(spi_baud, "div_spi", "mout_spi", MISC_DOUT1, 3, 2), +}; + +/* gate clocks */ +struct samsung_gate_clock exynos5440_gate_clks[] __initdata = { + GATE(pb0_250, "pb0_250", "div250", CLKEN_OV_VAL, 3, 0, 0), + GATE(pr0_250, "pr0_250", "div250", CLKEN_OV_VAL, 4, 0, 0), + GATE(pr1_250, "pr1_250", "div250", CLKEN_OV_VAL, 5, 0, 0), + GATE(b_250, "b_250", "div250", CLKEN_OV_VAL, 9, 0, 0), + GATE(b_125, "b_125", "div125", CLKEN_OV_VAL, 10, 0, 0), + GATE(b_200, "b_200", "div200", CLKEN_OV_VAL, 11, 0, 0), + GATE(sata, "sata", "div200", CLKEN_OV_VAL, 12, 0, 0), + GATE(usb, "usb", "div200", CLKEN_OV_VAL, 13, 0, 0), + GATE(gmac0, "gmac0", "div200", CLKEN_OV_VAL, 14, 0, 0), + GATE(cs250, "cs250", "div250", CLKEN_OV_VAL, 19, 0, 0), + GATE(pb0_250_o, "pb0_250_o", "pb0_250", CLKEN_OV_VAL, 3, 0, 0), + GATE(pr0_250_o, "pr0_250_o", "pr0_250", CLKEN_OV_VAL, 4, 0, 0), + GATE(pr1_250_o, "pr1_250_o", "pr1_250", CLKEN_OV_VAL, 5, 0, 0), + GATE(b_250_o, "b_250_o", "b_250", CLKEN_OV_VAL, 9, 0, 0), + GATE(b_125_o, "b_125_o", "b_125", CLKEN_OV_VAL, 10, 0, 0), + GATE(b_200_o, "b_200_o", "b_200", CLKEN_OV_VAL, 11, 0, 0), + GATE(sata_o, "sata_o", "sata", CLKEN_OV_VAL, 12, 0, 0), + GATE(usb_o, "usb_o", "usb", CLKEN_OV_VAL, 13, 0, 0), + GATE(gmac0_o, "gmac0_o", "gmac", CLKEN_OV_VAL, 14, 0, 0), + GATE(cs250_o, "cs250_o", "cs250", CLKEN_OV_VAL, 19, 0, 0), +}; + +static __initdata struct of_device_id ext_clk_match[] = { + { .compatible = "samsung,clock-xtal", .data = (void *)0, }, + {}, +}; + +/* register exynos5440 clocks */ +void __init exynos5440_clk_init(struct device_node *np) +{ + void __iomem *reg_base; + + reg_base = of_iomap(np, 0); + if (!reg_base) { + pr_err("%s: failed to map clock controller registers," + " aborting clock initialization\n", __func__); + return; + } + + samsung_clk_init(np, reg_base, nr_clks, NULL, 0, NULL, 0); + samsung_clk_of_register_fixed_ext(exynos5440_fixed_rate_ext_clks, + ARRAY_SIZE(exynos5440_fixed_rate_ext_clks), ext_clk_match); + + samsung_clk_register_pll2550x("cplla", "xtal", reg_base + 0x1c, 0x10); + samsung_clk_register_pll2550x("cpllb", "xtal", reg_base + 0x20, 0x10); + + samsung_clk_register_fixed_rate(exynos5440_fixed_rate_clks, + ARRAY_SIZE(exynos5440_fixed_rate_clks)); + samsung_clk_register_fixed_factor(exynos5440_fixed_factor_clks, + ARRAY_SIZE(exynos5440_fixed_factor_clks)); + samsung_clk_register_mux(exynos5440_mux_clks, + ARRAY_SIZE(exynos5440_mux_clks)); + samsung_clk_register_div(exynos5440_div_clks, + ARRAY_SIZE(exynos5440_div_clks)); + samsung_clk_register_gate(exynos5440_gate_clks, + ARRAY_SIZE(exynos5440_gate_clks)); + + pr_info("Exynos5440: arm_clk = %ldHz\n", _get_rate("armclk")); + pr_info("exynos5440 clock initialization complete\n"); +} +CLK_OF_DECLARE(exynos5440_clk, "samsung,exynos5440-clock", exynos5440_clk_init); diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c new file mode 100644 index 000000000000..89135f6be116 --- /dev/null +++ b/drivers/clk/samsung/clk-pll.c @@ -0,0 +1,419 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * Copyright (c) 2013 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains the utility functions to register the pll clocks. +*/ + +#include <linux/errno.h> +#include "clk.h" +#include "clk-pll.h" + +/* + * PLL35xx Clock Type + */ + +#define PLL35XX_MDIV_MASK (0x3FF) +#define PLL35XX_PDIV_MASK (0x3F) +#define PLL35XX_SDIV_MASK (0x7) +#define PLL35XX_MDIV_SHIFT (16) +#define PLL35XX_PDIV_SHIFT (8) +#define PLL35XX_SDIV_SHIFT (0) + +struct samsung_clk_pll35xx { + struct clk_hw hw; + const void __iomem *con_reg; +}; + +#define to_clk_pll35xx(_hw) container_of(_hw, struct samsung_clk_pll35xx, hw) + +static unsigned long samsung_pll35xx_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll35xx *pll = to_clk_pll35xx(hw); + u32 mdiv, pdiv, sdiv, pll_con; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK; + pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK; + sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +static const struct clk_ops samsung_pll35xx_clk_ops = { + .recalc_rate = samsung_pll35xx_recalc_rate, +}; + +struct clk * __init samsung_clk_register_pll35xx(const char *name, + const char *pname, const void __iomem *con_reg) +{ + struct samsung_clk_pll35xx *pll; + struct clk *clk; + struct clk_init_data init; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) { + pr_err("%s: could not allocate pll clk %s\n", __func__, name); + return NULL; + } + + init.name = name; + init.ops = &samsung_pll35xx_clk_ops; + init.flags = CLK_GET_RATE_NOCACHE; + init.parent_names = &pname; + init.num_parents = 1; + + pll->hw.init = &init; + pll->con_reg = con_reg; + + clk = clk_register(NULL, &pll->hw); + if (IS_ERR(clk)) { + pr_err("%s: failed to register pll clock %s\n", __func__, + name); + kfree(pll); + } + + if (clk_register_clkdev(clk, name, NULL)) + pr_err("%s: failed to register lookup for %s", __func__, name); + + return clk; +} + +/* + * PLL36xx Clock Type + */ + +#define PLL36XX_KDIV_MASK (0xFFFF) +#define PLL36XX_MDIV_MASK (0x1FF) +#define PLL36XX_PDIV_MASK (0x3F) +#define PLL36XX_SDIV_MASK (0x7) +#define PLL36XX_MDIV_SHIFT (16) +#define PLL36XX_PDIV_SHIFT (8) +#define PLL36XX_SDIV_SHIFT (0) + +struct samsung_clk_pll36xx { + struct clk_hw hw; + const void __iomem *con_reg; +}; + +#define to_clk_pll36xx(_hw) container_of(_hw, struct samsung_clk_pll36xx, hw) + +static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll36xx *pll = to_clk_pll36xx(hw); + u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1; + u64 fvco = parent_rate; + + pll_con0 = __raw_readl(pll->con_reg); + pll_con1 = __raw_readl(pll->con_reg + 4); + mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; + pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; + sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK; + kdiv = pll_con1 & PLL36XX_KDIV_MASK; + + fvco *= (mdiv << 16) + kdiv; + do_div(fvco, (pdiv << sdiv)); + fvco >>= 16; + + return (unsigned long)fvco; +} + +static const struct clk_ops samsung_pll36xx_clk_ops = { + .recalc_rate = samsung_pll36xx_recalc_rate, +}; + +struct clk * __init samsung_clk_register_pll36xx(const char *name, + const char *pname, const void __iomem *con_reg) +{ + struct samsung_clk_pll36xx *pll; + struct clk *clk; + struct clk_init_data init; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) { + pr_err("%s: could not allocate pll clk %s\n", __func__, name); + return NULL; + } + + init.name = name; + init.ops = &samsung_pll36xx_clk_ops; + init.flags = CLK_GET_RATE_NOCACHE; + init.parent_names = &pname; + init.num_parents = 1; + + pll->hw.init = &init; + pll->con_reg = con_reg; + + clk = clk_register(NULL, &pll->hw); + if (IS_ERR(clk)) { + pr_err("%s: failed to register pll clock %s\n", __func__, + name); + kfree(pll); + } + + if (clk_register_clkdev(clk, name, NULL)) + pr_err("%s: failed to register lookup for %s", __func__, name); + + return clk; +} + +/* + * PLL45xx Clock Type + */ + +#define PLL45XX_MDIV_MASK (0x3FF) +#define PLL45XX_PDIV_MASK (0x3F) +#define PLL45XX_SDIV_MASK (0x7) +#define PLL45XX_MDIV_SHIFT (16) +#define PLL45XX_PDIV_SHIFT (8) +#define PLL45XX_SDIV_SHIFT (0) + +struct samsung_clk_pll45xx { + struct clk_hw hw; + enum pll45xx_type type; + const void __iomem *con_reg; +}; + +#define to_clk_pll45xx(_hw) container_of(_hw, struct samsung_clk_pll45xx, hw) + +static unsigned long samsung_pll45xx_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll45xx *pll = to_clk_pll45xx(hw); + u32 mdiv, pdiv, sdiv, pll_con; + u64 fvco = parent_rate; + + pll_con = __raw_readl(pll->con_reg); + mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK; + pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK; + sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK; + + if (pll->type == pll_4508) + sdiv = sdiv - 1; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +static const struct clk_ops samsung_pll45xx_clk_ops = { + .recalc_rate = samsung_pll45xx_recalc_rate, +}; + +struct clk * __init samsung_clk_register_pll45xx(const char *name, + const char *pname, const void __iomem *con_reg, + enum pll45xx_type type) +{ + struct samsung_clk_pll45xx *pll; + struct clk *clk; + struct clk_init_data init; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) { + pr_err("%s: could not allocate pll clk %s\n", __func__, name); + return NULL; + } + + init.name = name; + init.ops = &samsung_pll45xx_clk_ops; + init.flags = CLK_GET_RATE_NOCACHE; + init.parent_names = &pname; + init.num_parents = 1; + + pll->hw.init = &init; + pll->con_reg = con_reg; + pll->type = type; + + clk = clk_register(NULL, &pll->hw); + if (IS_ERR(clk)) { + pr_err("%s: failed to register pll clock %s\n", __func__, + name); + kfree(pll); + } + + if (clk_register_clkdev(clk, name, NULL)) + pr_err("%s: failed to register lookup for %s", __func__, name); + + return clk; +} + +/* + * PLL46xx Clock Type + */ + +#define PLL46XX_MDIV_MASK (0x1FF) +#define PLL46XX_PDIV_MASK (0x3F) +#define PLL46XX_SDIV_MASK (0x7) +#define PLL46XX_MDIV_SHIFT (16) +#define PLL46XX_PDIV_SHIFT (8) +#define PLL46XX_SDIV_SHIFT (0) + +#define PLL46XX_KDIV_MASK (0xFFFF) +#define PLL4650C_KDIV_MASK (0xFFF) +#define PLL46XX_KDIV_SHIFT (0) + +struct samsung_clk_pll46xx { + struct clk_hw hw; + enum pll46xx_type type; + const void __iomem *con_reg; +}; + +#define to_clk_pll46xx(_hw) container_of(_hw, struct samsung_clk_pll46xx, hw) + +static unsigned long samsung_pll46xx_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll46xx *pll = to_clk_pll46xx(hw); + u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1, shift; + u64 fvco = parent_rate; + + pll_con0 = __raw_readl(pll->con_reg); + pll_con1 = __raw_readl(pll->con_reg + 4); + mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK; + pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; + sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; + kdiv = pll->type == pll_4650c ? pll_con1 & PLL4650C_KDIV_MASK : + pll_con1 & PLL46XX_KDIV_MASK; + + shift = pll->type == pll_4600 ? 16 : 10; + fvco *= (mdiv << shift) + kdiv; + do_div(fvco, (pdiv << sdiv)); + fvco >>= shift; + + return (unsigned long)fvco; +} + +static const struct clk_ops samsung_pll46xx_clk_ops = { + .recalc_rate = samsung_pll46xx_recalc_rate, +}; + +struct clk * __init samsung_clk_register_pll46xx(const char *name, + const char *pname, const void __iomem *con_reg, + enum pll46xx_type type) +{ + struct samsung_clk_pll46xx *pll; + struct clk *clk; + struct clk_init_data init; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) { + pr_err("%s: could not allocate pll clk %s\n", __func__, name); + return NULL; + } + + init.name = name; + init.ops = &samsung_pll46xx_clk_ops; + init.flags = CLK_GET_RATE_NOCACHE; + init.parent_names = &pname; + init.num_parents = 1; + + pll->hw.init = &init; + pll->con_reg = con_reg; + pll->type = type; + + clk = clk_register(NULL, &pll->hw); + if (IS_ERR(clk)) { + pr_err("%s: failed to register pll clock %s\n", __func__, + name); + kfree(pll); + } + + if (clk_register_clkdev(clk, name, NULL)) + pr_err("%s: failed to register lookup for %s", __func__, name); + + return clk; +} + +/* + * PLL2550x Clock Type + */ + +#define PLL2550X_R_MASK (0x1) +#define PLL2550X_P_MASK (0x3F) +#define PLL2550X_M_MASK (0x3FF) +#define PLL2550X_S_MASK (0x7) +#define PLL2550X_R_SHIFT (20) +#define PLL2550X_P_SHIFT (14) +#define PLL2550X_M_SHIFT (4) +#define PLL2550X_S_SHIFT (0) + +struct samsung_clk_pll2550x { + struct clk_hw hw; + const void __iomem *reg_base; + unsigned long offset; +}; + +#define to_clk_pll2550x(_hw) container_of(_hw, struct samsung_clk_pll2550x, hw) + +static unsigned long samsung_pll2550x_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct samsung_clk_pll2550x *pll = to_clk_pll2550x(hw); + u32 r, p, m, s, pll_stat; + u64 fvco = parent_rate; + + pll_stat = __raw_readl(pll->reg_base + pll->offset * 3); + r = (pll_stat >> PLL2550X_R_SHIFT) & PLL2550X_R_MASK; + if (!r) + return 0; + p = (pll_stat >> PLL2550X_P_SHIFT) & PLL2550X_P_MASK; + m = (pll_stat >> PLL2550X_M_SHIFT) & PLL2550X_M_MASK; + s = (pll_stat >> PLL2550X_S_SHIFT) & PLL2550X_S_MASK; + + fvco *= m; + do_div(fvco, (p << s)); + + return (unsigned long)fvco; +} + +static const struct clk_ops samsung_pll2550x_clk_ops = { + .recalc_rate = samsung_pll2550x_recalc_rate, +}; + +struct clk * __init samsung_clk_register_pll2550x(const char *name, + const char *pname, const void __iomem *reg_base, + const unsigned long offset) +{ + struct samsung_clk_pll2550x *pll; + struct clk *clk; + struct clk_init_data init; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) { + pr_err("%s: could not allocate pll clk %s\n", __func__, name); + return NULL; + } + + init.name = name; + init.ops = &samsung_pll2550x_clk_ops; + init.flags = CLK_GET_RATE_NOCACHE; + init.parent_names = &pname; + init.num_parents = 1; + + pll->hw.init = &init; + pll->reg_base = reg_base; + pll->offset = offset; + + clk = clk_register(NULL, &pll->hw); + if (IS_ERR(clk)) { + pr_err("%s: failed to register pll clock %s\n", __func__, + name); + kfree(pll); + } + + if (clk_register_clkdev(clk, name, NULL)) + pr_err("%s: failed to register lookup for %s", __func__, name); + + return clk; +} diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h new file mode 100644 index 000000000000..f33786e9a78b --- /dev/null +++ b/drivers/clk/samsung/clk-pll.h @@ -0,0 +1,41 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * Copyright (c) 2013 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for all PLL's in Samsung platforms +*/ + +#ifndef __SAMSUNG_CLK_PLL_H +#define __SAMSUNG_CLK_PLL_H + +enum pll45xx_type { + pll_4500, + pll_4502, + pll_4508 +}; + +enum pll46xx_type { + pll_4600, + pll_4650, + pll_4650c, +}; + +extern struct clk * __init samsung_clk_register_pll35xx(const char *name, + const char *pname, const void __iomem *con_reg); +extern struct clk * __init samsung_clk_register_pll36xx(const char *name, + const char *pname, const void __iomem *con_reg); +extern struct clk * __init samsung_clk_register_pll45xx(const char *name, + const char *pname, const void __iomem *con_reg, + enum pll45xx_type type); +extern struct clk * __init samsung_clk_register_pll46xx(const char *name, + const char *pname, const void __iomem *con_reg, + enum pll46xx_type type); +extern struct clk * __init samsung_clk_register_pll2550x(const char *name, + const char *pname, const void __iomem *reg_base, + const unsigned long offset); + +#endif /* __SAMSUNG_CLK_PLL_H */ diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c new file mode 100644 index 000000000000..cd3c40ab50f3 --- /dev/null +++ b/drivers/clk/samsung/clk.c @@ -0,0 +1,320 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * Copyright (c) 2013 Linaro Ltd. + * Author: Thomas Abraham <thomas.ab@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file includes utility functions to register clocks to common + * clock framework for Samsung platforms. +*/ + +#include <linux/syscore_ops.h> +#include "clk.h" + +static DEFINE_SPINLOCK(lock); +static struct clk **clk_table; +static void __iomem *reg_base; +#ifdef CONFIG_OF +static struct clk_onecell_data clk_data; +#endif + +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *reg_dump; +static unsigned long nr_reg_dump; + +static int samsung_clk_suspend(void) +{ + struct samsung_clk_reg_dump *rd = reg_dump; + unsigned long i; + + for (i = 0; i < nr_reg_dump; i++, rd++) + rd->value = __raw_readl(reg_base + rd->offset); + + return 0; +} + +static void samsung_clk_resume(void) +{ + struct samsung_clk_reg_dump *rd = reg_dump; + unsigned long i; + + for (i = 0; i < nr_reg_dump; i++, rd++) + __raw_writel(rd->value, reg_base + rd->offset); +} + +static struct syscore_ops samsung_clk_syscore_ops = { + .suspend = samsung_clk_suspend, + .resume = samsung_clk_resume, +}; +#endif /* CONFIG_PM_SLEEP */ + +/* setup the essentials required to support clock lookup using ccf */ +void __init samsung_clk_init(struct device_node *np, void __iomem *base, + unsigned long nr_clks, unsigned long *rdump, + unsigned long nr_rdump, unsigned long *soc_rdump, + unsigned long nr_soc_rdump) +{ + reg_base = base; + +#ifdef CONFIG_PM_SLEEP + if (rdump && nr_rdump) { + unsigned int idx; + reg_dump = kzalloc(sizeof(struct samsung_clk_reg_dump) + * (nr_rdump + nr_soc_rdump), GFP_KERNEL); + if (!reg_dump) { + pr_err("%s: memory alloc for register dump failed\n", + __func__); + return; + } + + for (idx = 0; idx < nr_rdump; idx++) + reg_dump[idx].offset = rdump[idx]; + for (idx = 0; idx < nr_soc_rdump; idx++) + reg_dump[nr_rdump + idx].offset = soc_rdump[idx]; + nr_reg_dump = nr_rdump + nr_soc_rdump; + register_syscore_ops(&samsung_clk_syscore_ops); + } +#endif + + clk_table = kzalloc(sizeof(struct clk *) * nr_clks, GFP_KERNEL); + if (!clk_table) + panic("could not allocate clock lookup table\n"); + + if (!np) + return; + +#ifdef CONFIG_OF + clk_data.clks = clk_table; + clk_data.clk_num = nr_clks; + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +#endif +} + +/* add a clock instance to the clock lookup table used for dt based lookup */ +void samsung_clk_add_lookup(struct clk *clk, unsigned int id) +{ + if (clk_table && id) + clk_table[id] = clk; +} + +/* register a list of aliases */ +void __init samsung_clk_register_alias(struct samsung_clock_alias *list, + unsigned int nr_clk) +{ + struct clk *clk; + unsigned int idx, ret; + + if (!clk_table) { + pr_err("%s: clock table missing\n", __func__); + return; + } + + for (idx = 0; idx < nr_clk; idx++, list++) { + if (!list->id) { + pr_err("%s: clock id missing for index %d\n", __func__, + idx); + continue; + } + + clk = clk_table[list->id]; + if (!clk) { + pr_err("%s: failed to find clock %d\n", __func__, + list->id); + continue; + } + + ret = clk_register_clkdev(clk, list->alias, list->dev_name); + if (ret) + pr_err("%s: failed to register lookup %s\n", + __func__, list->alias); + } +} + +/* register a list of fixed clocks */ +void __init samsung_clk_register_fixed_rate( + struct samsung_fixed_rate_clock *list, unsigned int nr_clk) +{ + struct clk *clk; + unsigned int idx, ret; + + for (idx = 0; idx < nr_clk; idx++, list++) { + clk = clk_register_fixed_rate(NULL, list->name, + list->parent_name, list->flags, list->fixed_rate); + if (IS_ERR(clk)) { + pr_err("%s: failed to register clock %s\n", __func__, + list->name); + continue; + } + + samsung_clk_add_lookup(clk, list->id); + + /* + * Unconditionally add a clock lookup for the fixed rate clocks. + * There are not many of these on any of Samsung platforms. + */ + ret = clk_register_clkdev(clk, list->name, NULL); + if (ret) + pr_err("%s: failed to register clock lookup for %s", + __func__, list->name); + } +} + +/* register a list of fixed factor clocks */ +void __init samsung_clk_register_fixed_factor( + struct samsung_fixed_factor_clock *list, unsigned int nr_clk) +{ + struct clk *clk; + unsigned int idx; + + for (idx = 0; idx < nr_clk; idx++, list++) { + clk = clk_register_fixed_factor(NULL, list->name, + list->parent_name, list->flags, list->mult, list->div); + if (IS_ERR(clk)) { + pr_err("%s: failed to register clock %s\n", __func__, + list->name); + continue; + } + + samsung_clk_add_lookup(clk, list->id); + } +} + +/* register a list of mux clocks */ +void __init samsung_clk_register_mux(struct samsung_mux_clock *list, + unsigned int nr_clk) +{ + struct clk *clk; + unsigned int idx, ret; + + for (idx = 0; idx < nr_clk; idx++, list++) { + clk = clk_register_mux(NULL, list->name, list->parent_names, + list->num_parents, list->flags, reg_base + list->offset, + list->shift, list->width, list->mux_flags, &lock); + if (IS_ERR(clk)) { + pr_err("%s: failed to register clock %s\n", __func__, + list->name); + continue; + } + + samsung_clk_add_lookup(clk, list->id); + + /* register a clock lookup only if a clock alias is specified */ + if (list->alias) { + ret = clk_register_clkdev(clk, list->alias, + list->dev_name); + if (ret) + pr_err("%s: failed to register lookup %s\n", + __func__, list->alias); + } + } +} + +/* register a list of div clocks */ +void __init samsung_clk_register_div(struct samsung_div_clock *list, + unsigned int nr_clk) +{ + struct clk *clk; + unsigned int idx, ret; + + for (idx = 0; idx < nr_clk; idx++, list++) { + if (list->table) + clk = clk_register_divider_table(NULL, list->name, + list->parent_name, list->flags, + reg_base + list->offset, list->shift, + list->width, list->div_flags, + list->table, &lock); + else + clk = clk_register_divider(NULL, list->name, + list->parent_name, list->flags, + reg_base + list->offset, list->shift, + list->width, list->div_flags, &lock); + if (IS_ERR(clk)) { + pr_err("%s: failed to register clock %s\n", __func__, + list->name); + continue; + } + + samsung_clk_add_lookup(clk, list->id); + + /* register a clock lookup only if a clock alias is specified */ + if (list->alias) { + ret = clk_register_clkdev(clk, list->alias, + list->dev_name); + if (ret) + pr_err("%s: failed to register lookup %s\n", + __func__, list->alias); + } + } +} + +/* register a list of gate clocks */ +void __init samsung_clk_register_gate(struct samsung_gate_clock *list, + unsigned int nr_clk) +{ + struct clk *clk; + unsigned int idx, ret; + + for (idx = 0; idx < nr_clk; idx++, list++) { + clk = clk_register_gate(NULL, list->name, list->parent_name, + list->flags, reg_base + list->offset, + list->bit_idx, list->gate_flags, &lock); + if (IS_ERR(clk)) { + pr_err("%s: failed to register clock %s\n", __func__, + list->name); + continue; + } + + /* register a clock lookup only if a clock alias is specified */ + if (list->alias) { + ret = clk_register_clkdev(clk, list->alias, + list->dev_name); + if (ret) + pr_err("%s: failed to register lookup %s\n", + __func__, list->alias); + } + + samsung_clk_add_lookup(clk, list->id); + } +} + +/* + * obtain the clock speed of all external fixed clock sources from device + * tree and register it + */ +#ifdef CONFIG_OF +void __init samsung_clk_of_register_fixed_ext( + struct samsung_fixed_rate_clock *fixed_rate_clk, + unsigned int nr_fixed_rate_clk, + struct of_device_id *clk_matches) +{ + const struct of_device_id *match; + struct device_node *np; + u32 freq; + + for_each_matching_node_and_match(np, clk_matches, &match) { + if (of_property_read_u32(np, "clock-frequency", &freq)) + continue; + fixed_rate_clk[(u32)match->data].fixed_rate = freq; + } + samsung_clk_register_fixed_rate(fixed_rate_clk, nr_fixed_rate_clk); +} +#endif + +/* utility function to get the rate of a specified clock */ +unsigned long _get_rate(const char *clk_name) +{ + struct clk *clk; + unsigned long rate; + + clk = clk_get(NULL, clk_name); + if (IS_ERR(clk)) { + pr_err("%s: could not find clock %s\n", __func__, clk_name); + return 0; + } + rate = clk_get_rate(clk); + clk_put(clk); + return rate; +} diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h new file mode 100644 index 000000000000..10b2111f0c0f --- /dev/null +++ b/drivers/clk/samsung/clk.h @@ -0,0 +1,289 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * Copyright (c) 2013 Linaro Ltd. + * Author: Thomas Abraham <thomas.ab@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for all Samsung platforms +*/ + +#ifndef __SAMSUNG_CLK_H +#define __SAMSUNG_CLK_H + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/io.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <mach/map.h> + +/** + * struct samsung_clock_alias: information about mux clock + * @id: platform specific id of the clock. + * @dev_name: name of the device to which this clock belongs. + * @alias: optional clock alias name to be assigned to this clock. + */ +struct samsung_clock_alias { + unsigned int id; + const char *dev_name; + const char *alias; +}; + +#define ALIAS(_id, dname, a) \ + { \ + .id = _id, \ + .dev_name = dname, \ + .alias = a, \ + } + +/** + * struct samsung_fixed_rate_clock: information about fixed-rate clock + * @id: platform specific id of the clock. + * @name: name of this fixed-rate clock. + * @parent_name: optional parent clock name. + * @flags: optional fixed-rate clock flags. + * @fixed-rate: fixed clock rate of this clock. + */ +struct samsung_fixed_rate_clock { + unsigned int id; + char *name; + const char *parent_name; + unsigned long flags; + unsigned long fixed_rate; +}; + +#define FRATE(_id, cname, pname, f, frate) \ + { \ + .id = _id, \ + .name = cname, \ + .parent_name = pname, \ + .flags = f, \ + .fixed_rate = frate, \ + } + +/* + * struct samsung_fixed_factor_clock: information about fixed-factor clock + * @id: platform specific id of the clock. + * @name: name of this fixed-factor clock. + * @parent_name: parent clock name. + * @mult: fixed multiplication factor. + * @div: fixed division factor. + * @flags: optional fixed-factor clock flags. + */ +struct samsung_fixed_factor_clock { + unsigned int id; + char *name; + const char *parent_name; + unsigned long mult; + unsigned long div; + unsigned long flags; +}; + +#define FFACTOR(_id, cname, pname, m, d, f) \ + { \ + .id = _id, \ + .name = cname, \ + .parent_name = pname, \ + .mult = m, \ + .div = d, \ + .flags = f, \ + } + +/** + * struct samsung_mux_clock: information about mux clock + * @id: platform specific id of the clock. + * @dev_name: name of the device to which this clock belongs. + * @name: name of this mux clock. + * @parent_names: array of pointer to parent clock names. + * @num_parents: number of parents listed in @parent_names. + * @flags: optional flags for basic clock. + * @offset: offset of the register for configuring the mux. + * @shift: starting bit location of the mux control bit-field in @reg. + * @width: width of the mux control bit-field in @reg. + * @mux_flags: flags for mux-type clock. + * @alias: optional clock alias name to be assigned to this clock. + */ +struct samsung_mux_clock { + unsigned int id; + const char *dev_name; + const char *name; + const char **parent_names; + u8 num_parents; + unsigned long flags; + unsigned long offset; + u8 shift; + u8 width; + u8 mux_flags; + const char *alias; +}; + +#define __MUX(_id, dname, cname, pnames, o, s, w, f, mf, a) \ + { \ + .id = _id, \ + .dev_name = dname, \ + .name = cname, \ + .parent_names = pnames, \ + .num_parents = ARRAY_SIZE(pnames), \ + .flags = f, \ + .offset = o, \ + .shift = s, \ + .width = w, \ + .mux_flags = mf, \ + .alias = a, \ + } + +#define MUX(_id, cname, pnames, o, s, w) \ + __MUX(_id, NULL, cname, pnames, o, s, w, 0, 0, NULL) + +#define MUX_A(_id, cname, pnames, o, s, w, a) \ + __MUX(_id, NULL, cname, pnames, o, s, w, 0, 0, a) + +#define MUX_F(_id, cname, pnames, o, s, w, f, mf) \ + __MUX(_id, NULL, cname, pnames, o, s, w, f, mf, NULL) + +/** + * @id: platform specific id of the clock. + * struct samsung_div_clock: information about div clock + * @dev_name: name of the device to which this clock belongs. + * @name: name of this div clock. + * @parent_name: name of the parent clock. + * @flags: optional flags for basic clock. + * @offset: offset of the register for configuring the div. + * @shift: starting bit location of the div control bit-field in @reg. + * @div_flags: flags for div-type clock. + * @alias: optional clock alias name to be assigned to this clock. + */ +struct samsung_div_clock { + unsigned int id; + const char *dev_name; + const char *name; + const char *parent_name; + unsigned long flags; + unsigned long offset; + u8 shift; + u8 width; + u8 div_flags; + const char *alias; + struct clk_div_table *table; +}; + +#define __DIV(_id, dname, cname, pname, o, s, w, f, df, a, t) \ + { \ + .id = _id, \ + .dev_name = dname, \ + .name = cname, \ + .parent_name = pname, \ + .flags = f, \ + .offset = o, \ + .shift = s, \ + .width = w, \ + .div_flags = df, \ + .alias = a, \ + .table = t, \ + } + +#define DIV(_id, cname, pname, o, s, w) \ + __DIV(_id, NULL, cname, pname, o, s, w, 0, 0, NULL, NULL) + +#define DIV_A(_id, cname, pname, o, s, w, a) \ + __DIV(_id, NULL, cname, pname, o, s, w, 0, 0, a, NULL) + +#define DIV_F(_id, cname, pname, o, s, w, f, df) \ + __DIV(_id, NULL, cname, pname, o, s, w, f, df, NULL, NULL) + +#define DIV_T(_id, cname, pname, o, s, w, t) \ + __DIV(_id, NULL, cname, pname, o, s, w, 0, 0, NULL, t) + +/** + * struct samsung_gate_clock: information about gate clock + * @id: platform specific id of the clock. + * @dev_name: name of the device to which this clock belongs. + * @name: name of this gate clock. + * @parent_name: name of the parent clock. + * @flags: optional flags for basic clock. + * @offset: offset of the register for configuring the gate. + * @bit_idx: bit index of the gate control bit-field in @reg. + * @gate_flags: flags for gate-type clock. + * @alias: optional clock alias name to be assigned to this clock. + */ +struct samsung_gate_clock { + unsigned int id; + const char *dev_name; + const char *name; + const char *parent_name; + unsigned long flags; + unsigned long offset; + u8 bit_idx; + u8 gate_flags; + const char *alias; +}; + +#define __GATE(_id, dname, cname, pname, o, b, f, gf, a) \ + { \ + .id = _id, \ + .dev_name = dname, \ + .name = cname, \ + .parent_name = pname, \ + .flags = f, \ + .offset = o, \ + .bit_idx = b, \ + .gate_flags = gf, \ + .alias = a, \ + } + +#define GATE(_id, cname, pname, o, b, f, gf) \ + __GATE(_id, NULL, cname, pname, o, b, f, gf, NULL) + +#define GATE_A(_id, cname, pname, o, b, f, gf, a) \ + __GATE(_id, NULL, cname, pname, o, b, f, gf, a) + +#define GATE_D(_id, dname, cname, pname, o, b, f, gf) \ + __GATE(_id, dname, cname, pname, o, b, f, gf, NULL) + +#define GATE_DA(_id, dname, cname, pname, o, b, f, gf, a) \ + __GATE(_id, dname, cname, pname, o, b, f, gf, a) + +#define PNAME(x) static const char *x[] __initdata + +/** + * struct samsung_clk_reg_dump: register dump of clock controller registers. + * @offset: clock register offset from the controller base address. + * @value: the value to be register at offset. + */ +struct samsung_clk_reg_dump { + u32 offset; + u32 value; +}; + +extern void __init samsung_clk_init(struct device_node *np, void __iomem *base, + unsigned long nr_clks, unsigned long *rdump, + unsigned long nr_rdump, unsigned long *soc_rdump, + unsigned long nr_soc_rdump); +extern void __init samsung_clk_of_register_fixed_ext( + struct samsung_fixed_rate_clock *fixed_rate_clk, + unsigned int nr_fixed_rate_clk, + struct of_device_id *clk_matches); + +extern void samsung_clk_add_lookup(struct clk *clk, unsigned int id); + +extern void samsung_clk_register_alias(struct samsung_clock_alias *list, + unsigned int nr_clk); +extern void __init samsung_clk_register_fixed_rate( + struct samsung_fixed_rate_clock *clk_list, unsigned int nr_clk); +extern void __init samsung_clk_register_fixed_factor( + struct samsung_fixed_factor_clock *list, unsigned int nr_clk); +extern void __init samsung_clk_register_mux(struct samsung_mux_clock *clk_list, + unsigned int nr_clk); +extern void __init samsung_clk_register_div(struct samsung_div_clock *clk_list, + unsigned int nr_clk); +extern void __init samsung_clk_register_gate( + struct samsung_gate_clock *clk_list, unsigned int nr_clk); + +extern unsigned long _get_rate(const char *clk_name); + +#endif /* __SAMSUNG_CLK_H */ diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile index 2b41b0f4f731..f49fac2d193a 100644 --- a/drivers/clk/tegra/Makefile +++ b/drivers/clk/tegra/Makefile @@ -9,3 +9,4 @@ obj-y += clk-super.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clk-tegra20.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += clk-tegra30.o +obj-$(CONFIG_ARCH_TEGRA_114_SOC) += clk-tegra114.o diff --git a/drivers/clk/tegra/clk-periph-gate.c b/drivers/clk/tegra/clk-periph-gate.c index 6dd533251e7b..bafee9895a24 100644 --- a/drivers/clk/tegra/clk-periph-gate.c +++ b/drivers/clk/tegra/clk-periph-gate.c @@ -41,7 +41,9 @@ static DEFINE_SPINLOCK(periph_ref_lock); #define write_rst_clr(val, gate) \ writel_relaxed(val, gate->clk_base + (gate->regs->rst_clr_reg)) -#define periph_clk_to_bit(periph) (1 << (gate->clk_num % 32)) +#define periph_clk_to_bit(gate) (1 << (gate->clk_num % 32)) + +#define LVL2_CLK_GATE_OVRE 0x554 /* Peripheral gate clock ops */ static int clk_periph_is_enabled(struct clk_hw *hw) @@ -83,6 +85,13 @@ static int clk_periph_enable(struct clk_hw *hw) } } + if (gate->flags & TEGRA_PERIPH_WAR_1005168) { + writel_relaxed(0, gate->clk_base + LVL2_CLK_GATE_OVRE); + writel_relaxed(BIT(22), gate->clk_base + LVL2_CLK_GATE_OVRE); + udelay(1); + writel_relaxed(0, gate->clk_base + LVL2_CLK_GATE_OVRE); + } + spin_unlock_irqrestore(&periph_ref_lock, flags); return 0; diff --git a/drivers/clk/tegra/clk-periph.c b/drivers/clk/tegra/clk-periph.c index 788486e6331a..b2309d37a963 100644 --- a/drivers/clk/tegra/clk-periph.c +++ b/drivers/clk/tegra/clk-periph.c @@ -16,6 +16,7 @@ #include <linux/clk.h> #include <linux/clk-provider.h> +#include <linux/export.h> #include <linux/slab.h> #include <linux/err.h> @@ -128,6 +129,7 @@ void tegra_periph_reset_deassert(struct clk *c) tegra_periph_reset(gate, 0); } +EXPORT_SYMBOL(tegra_periph_reset_deassert); void tegra_periph_reset_assert(struct clk *c) { @@ -147,6 +149,7 @@ void tegra_periph_reset_assert(struct clk *c) tegra_periph_reset(gate, 1); } +EXPORT_SYMBOL(tegra_periph_reset_assert); const struct clk_ops tegra_clk_periph_ops = { .get_parent = clk_periph_get_parent, @@ -170,14 +173,15 @@ const struct clk_ops tegra_clk_periph_nodiv_ops = { static struct clk *_tegra_clk_register_periph(const char *name, const char **parent_names, int num_parents, struct tegra_clk_periph *periph, - void __iomem *clk_base, u32 offset, bool div) + void __iomem *clk_base, u32 offset, bool div, + unsigned long flags) { struct clk *clk; struct clk_init_data init; init.name = name; init.ops = div ? &tegra_clk_periph_ops : &tegra_clk_periph_nodiv_ops; - init.flags = div ? 0 : CLK_SET_RATE_PARENT; + init.flags = flags; init.parent_names = parent_names; init.num_parents = num_parents; @@ -202,10 +206,10 @@ static struct clk *_tegra_clk_register_periph(const char *name, struct clk *tegra_clk_register_periph(const char *name, const char **parent_names, int num_parents, struct tegra_clk_periph *periph, void __iomem *clk_base, - u32 offset) + u32 offset, unsigned long flags) { return _tegra_clk_register_periph(name, parent_names, num_parents, - periph, clk_base, offset, true); + periph, clk_base, offset, true, flags); } struct clk *tegra_clk_register_periph_nodiv(const char *name, @@ -214,5 +218,5 @@ struct clk *tegra_clk_register_periph_nodiv(const char *name, u32 offset) { return _tegra_clk_register_periph(name, parent_names, num_parents, - periph, clk_base, offset, false); + periph, clk_base, offset, false, CLK_SET_RATE_PARENT); } diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index 165f24734c1b..17c2cc086eb4 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -79,6 +79,48 @@ #define PLLE_SS_CTRL 0x68 #define PLLE_SS_DISABLE (7 << 10) +#define PLLE_AUX_PLLP_SEL BIT(2) +#define PLLE_AUX_ENABLE_SWCTL BIT(4) +#define PLLE_AUX_SEQ_ENABLE BIT(24) +#define PLLE_AUX_PLLRE_SEL BIT(28) + +#define PLLE_MISC_PLLE_PTS BIT(8) +#define PLLE_MISC_IDDQ_SW_VALUE BIT(13) +#define PLLE_MISC_IDDQ_SW_CTRL BIT(14) +#define PLLE_MISC_VREG_BG_CTRL_SHIFT 4 +#define PLLE_MISC_VREG_BG_CTRL_MASK (3 << PLLE_MISC_VREG_BG_CTRL_SHIFT) +#define PLLE_MISC_VREG_CTRL_SHIFT 2 +#define PLLE_MISC_VREG_CTRL_MASK (2 << PLLE_MISC_VREG_CTRL_SHIFT) + +#define PLLCX_MISC_STROBE BIT(31) +#define PLLCX_MISC_RESET BIT(30) +#define PLLCX_MISC_SDM_DIV_SHIFT 28 +#define PLLCX_MISC_SDM_DIV_MASK (0x3 << PLLCX_MISC_SDM_DIV_SHIFT) +#define PLLCX_MISC_FILT_DIV_SHIFT 26 +#define PLLCX_MISC_FILT_DIV_MASK (0x3 << PLLCX_MISC_FILT_DIV_SHIFT) +#define PLLCX_MISC_ALPHA_SHIFT 18 +#define PLLCX_MISC_DIV_LOW_RANGE \ + ((0x1 << PLLCX_MISC_SDM_DIV_SHIFT) | \ + (0x1 << PLLCX_MISC_FILT_DIV_SHIFT)) +#define PLLCX_MISC_DIV_HIGH_RANGE \ + ((0x2 << PLLCX_MISC_SDM_DIV_SHIFT) | \ + (0x2 << PLLCX_MISC_FILT_DIV_SHIFT)) +#define PLLCX_MISC_COEF_LOW_RANGE \ + ((0x14 << PLLCX_MISC_KA_SHIFT) | (0x38 << PLLCX_MISC_KB_SHIFT)) +#define PLLCX_MISC_KA_SHIFT 2 +#define PLLCX_MISC_KB_SHIFT 9 +#define PLLCX_MISC_DEFAULT (PLLCX_MISC_COEF_LOW_RANGE | \ + (0x19 << PLLCX_MISC_ALPHA_SHIFT) | \ + PLLCX_MISC_DIV_LOW_RANGE | \ + PLLCX_MISC_RESET) +#define PLLCX_MISC1_DEFAULT 0x000d2308 +#define PLLCX_MISC2_DEFAULT 0x30211200 +#define PLLCX_MISC3_DEFAULT 0x200 + +#define PMC_PLLM_WB0_OVERRIDE 0x1dc +#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0 +#define PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK BIT(27) + #define PMC_SATA_PWRGT 0x1ac #define PMC_SATA_PWRGT_PLLE_IDDQ_VALUE BIT(5) #define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL BIT(4) @@ -101,6 +143,24 @@ #define divn_max(p) (divn_mask(p)) #define divp_max(p) (1 << (divp_mask(p))) + +#ifdef CONFIG_ARCH_TEGRA_114_SOC +/* PLLXC has 4-bit PDIV, but entry 15 is not allowed in h/w */ +#define PLLXC_PDIV_MAX 14 + +/* non-monotonic mapping below is not a typo */ +static u8 pllxc_p[PLLXC_PDIV_MAX + 1] = { + /* PDIV: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 */ + /* p: */ 1, 2, 3, 4, 5, 6, 8, 10, 12, 16, 12, 16, 20, 24, 32 +}; + +#define PLLCX_PDIV_MAX 7 +static u8 pllcx_p[PLLCX_PDIV_MAX + 1] = { + /* PDIV: 0, 1, 2, 3, 4, 5, 6, 7 */ + /* p: */ 1, 2, 3, 4, 6, 8, 12, 16 +}; +#endif + static void clk_pll_enable_lock(struct tegra_clk_pll *pll) { u32 val; @@ -108,25 +168,36 @@ static void clk_pll_enable_lock(struct tegra_clk_pll *pll) if (!(pll->flags & TEGRA_PLL_USE_LOCK)) return; + if (!(pll->flags & TEGRA_PLL_HAS_LOCK_ENABLE)) + return; + val = pll_readl_misc(pll); val |= BIT(pll->params->lock_enable_bit_idx); pll_writel_misc(val, pll); } -static int clk_pll_wait_for_lock(struct tegra_clk_pll *pll, - void __iomem *lock_addr, u32 lock_bit_idx) +static int clk_pll_wait_for_lock(struct tegra_clk_pll *pll) { int i; - u32 val; + u32 val, lock_mask; + void __iomem *lock_addr; if (!(pll->flags & TEGRA_PLL_USE_LOCK)) { udelay(pll->params->lock_delay); return 0; } + lock_addr = pll->clk_base; + if (pll->flags & TEGRA_PLL_LOCK_MISC) + lock_addr += pll->params->misc_reg; + else + lock_addr += pll->params->base_reg; + + lock_mask = pll->params->lock_mask; + for (i = 0; i < pll->params->lock_delay; i++) { val = readl_relaxed(lock_addr); - if (val & BIT(lock_bit_idx)) { + if ((val & lock_mask) == lock_mask) { udelay(PLL_POST_LOCK_DELAY); return 0; } @@ -155,7 +226,7 @@ static int clk_pll_is_enabled(struct clk_hw *hw) return val & PLL_BASE_ENABLE ? 1 : 0; } -static int _clk_pll_enable(struct clk_hw *hw) +static void _clk_pll_enable(struct clk_hw *hw) { struct tegra_clk_pll *pll = to_clk_pll(hw); u32 val; @@ -163,7 +234,8 @@ static int _clk_pll_enable(struct clk_hw *hw) clk_pll_enable_lock(pll); val = pll_readl_base(pll); - val &= ~PLL_BASE_BYPASS; + if (pll->flags & TEGRA_PLL_BYPASS) + val &= ~PLL_BASE_BYPASS; val |= PLL_BASE_ENABLE; pll_writel_base(val, pll); @@ -172,11 +244,6 @@ static int _clk_pll_enable(struct clk_hw *hw) val |= PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE; writel_relaxed(val, pll->pmc + PMC_PLLP_WB0_OVERRIDE); } - - clk_pll_wait_for_lock(pll, pll->clk_base + pll->params->base_reg, - pll->params->lock_bit_idx); - - return 0; } static void _clk_pll_disable(struct clk_hw *hw) @@ -185,7 +252,9 @@ static void _clk_pll_disable(struct clk_hw *hw) u32 val; val = pll_readl_base(pll); - val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE); + if (pll->flags & TEGRA_PLL_BYPASS) + val &= ~PLL_BASE_BYPASS; + val &= ~PLL_BASE_ENABLE; pll_writel_base(val, pll); if (pll->flags & TEGRA_PLLM) { @@ -204,7 +273,9 @@ static int clk_pll_enable(struct clk_hw *hw) if (pll->lock) spin_lock_irqsave(pll->lock, flags); - ret = _clk_pll_enable(hw); + _clk_pll_enable(hw); + + ret = clk_pll_wait_for_lock(pll); if (pll->lock) spin_unlock_irqrestore(pll->lock, flags); @@ -241,8 +312,6 @@ static int _get_table_rate(struct clk_hw *hw, if (sel->input_rate == 0) return -EINVAL; - BUG_ON(sel->p < 1); - cfg->input_rate = sel->input_rate; cfg->output_rate = sel->output_rate; cfg->m = sel->m; @@ -257,6 +326,7 @@ static int _calc_rate(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, unsigned long rate, unsigned long parent_rate) { struct tegra_clk_pll *pll = to_clk_pll(hw); + struct pdiv_map *p_tohw = pll->params->pdiv_tohw; unsigned long cfreq; u32 p_div = 0; @@ -290,88 +360,119 @@ static int _calc_rate(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, cfg->output_rate <<= 1) p_div++; - cfg->p = 1 << p_div; cfg->m = parent_rate / cfreq; cfg->n = cfg->output_rate / cfreq; cfg->cpcon = OUT_OF_TABLE_CPCON; if (cfg->m > divm_max(pll) || cfg->n > divn_max(pll) || - cfg->p > divp_max(pll) || cfg->output_rate > pll->params->vco_max) { + (1 << p_div) > divp_max(pll) + || cfg->output_rate > pll->params->vco_max) { pr_err("%s: Failed to set %s rate %lu\n", __func__, __clk_get_name(hw->clk), rate); return -EINVAL; } + if (p_tohw) { + p_div = 1 << p_div; + while (p_tohw->pdiv) { + if (p_div <= p_tohw->pdiv) { + cfg->p = p_tohw->hw_val; + break; + } + p_tohw++; + } + if (!p_tohw->pdiv) + return -EINVAL; + } else + cfg->p = p_div; + return 0; } -static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, - unsigned long rate) +static void _update_pll_mnp(struct tegra_clk_pll *pll, + struct tegra_clk_pll_freq_table *cfg) { - struct tegra_clk_pll *pll = to_clk_pll(hw); - unsigned long flags = 0; - u32 divp, val, old_base; - int state; - - divp = __ffs(cfg->p); - - if (pll->flags & TEGRA_PLLU) - divp ^= 1; + u32 val; - if (pll->lock) - spin_lock_irqsave(pll->lock, flags); + val = pll_readl_base(pll); - old_base = val = pll_readl_base(pll); val &= ~((divm_mask(pll) << pll->divm_shift) | (divn_mask(pll) << pll->divn_shift) | (divp_mask(pll) << pll->divp_shift)); val |= ((cfg->m << pll->divm_shift) | (cfg->n << pll->divn_shift) | - (divp << pll->divp_shift)); - if (val == old_base) { - if (pll->lock) - spin_unlock_irqrestore(pll->lock, flags); - return 0; + (cfg->p << pll->divp_shift)); + + pll_writel_base(val, pll); +} + +static void _get_pll_mnp(struct tegra_clk_pll *pll, + struct tegra_clk_pll_freq_table *cfg) +{ + u32 val; + + val = pll_readl_base(pll); + + cfg->m = (val >> pll->divm_shift) & (divm_mask(pll)); + cfg->n = (val >> pll->divn_shift) & (divn_mask(pll)); + cfg->p = (val >> pll->divp_shift) & (divp_mask(pll)); +} + +static void _update_pll_cpcon(struct tegra_clk_pll *pll, + struct tegra_clk_pll_freq_table *cfg, + unsigned long rate) +{ + u32 val; + + val = pll_readl_misc(pll); + + val &= ~(PLL_MISC_CPCON_MASK << PLL_MISC_CPCON_SHIFT); + val |= cfg->cpcon << PLL_MISC_CPCON_SHIFT; + + if (pll->flags & TEGRA_PLL_SET_LFCON) { + val &= ~(PLL_MISC_LFCON_MASK << PLL_MISC_LFCON_SHIFT); + if (cfg->n >= PLLDU_LFCON_SET_DIVN) + val |= 1 << PLL_MISC_LFCON_SHIFT; + } else if (pll->flags & TEGRA_PLL_SET_DCCON) { + val &= ~(1 << PLL_MISC_DCCON_SHIFT); + if (rate >= (pll->params->vco_max >> 1)) + val |= 1 << PLL_MISC_DCCON_SHIFT; } + pll_writel_misc(val, pll); +} + +static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg, + unsigned long rate) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + int state, ret = 0; + state = clk_pll_is_enabled(hw); - if (state) { + if (state) _clk_pll_disable(hw); - val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE); - } - pll_writel_base(val, pll); - if (pll->flags & TEGRA_PLL_HAS_CPCON) { - val = pll_readl_misc(pll); - val &= ~(PLL_MISC_CPCON_MASK << PLL_MISC_CPCON_SHIFT); - val |= cfg->cpcon << PLL_MISC_CPCON_SHIFT; - if (pll->flags & TEGRA_PLL_SET_LFCON) { - val &= ~(PLL_MISC_LFCON_MASK << PLL_MISC_LFCON_SHIFT); - if (cfg->n >= PLLDU_LFCON_SET_DIVN) - val |= 0x1 << PLL_MISC_LFCON_SHIFT; - } else if (pll->flags & TEGRA_PLL_SET_DCCON) { - val &= ~(0x1 << PLL_MISC_DCCON_SHIFT); - if (rate >= (pll->params->vco_max >> 1)) - val |= 0x1 << PLL_MISC_DCCON_SHIFT; - } - pll_writel_misc(val, pll); - } + _update_pll_mnp(pll, cfg); - if (pll->lock) - spin_unlock_irqrestore(pll->lock, flags); + if (pll->flags & TEGRA_PLL_HAS_CPCON) + _update_pll_cpcon(pll, cfg, rate); - if (state) - clk_pll_enable(hw); + if (state) { + _clk_pll_enable(hw); + ret = clk_pll_wait_for_lock(pll); + } - return 0; + return ret; } static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct tegra_clk_pll *pll = to_clk_pll(hw); - struct tegra_clk_pll_freq_table cfg; + struct tegra_clk_pll_freq_table cfg, old_cfg; + unsigned long flags = 0; + int ret = 0; if (pll->flags & TEGRA_PLL_FIXED) { if (rate != pll->fixed_rate) { @@ -387,7 +488,18 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, _calc_rate(hw, &cfg, rate, parent_rate)) return -EINVAL; - return _program_pll(hw, &cfg, rate); + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _get_pll_mnp(pll, &old_cfg); + + if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_cfg.p != cfg.p) + ret = _program_pll(hw, &cfg, rate); + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; } static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate, @@ -409,7 +521,7 @@ static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate, return -EINVAL; output_rate *= cfg.n; - do_div(output_rate, cfg.m * cfg.p); + do_div(output_rate, cfg.m * (1 << cfg.p)); return output_rate; } @@ -418,11 +530,15 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct tegra_clk_pll *pll = to_clk_pll(hw); - u32 val = pll_readl_base(pll); - u32 divn = 0, divm = 0, divp = 0; + struct tegra_clk_pll_freq_table cfg; + struct pdiv_map *p_tohw = pll->params->pdiv_tohw; + u32 val; u64 rate = parent_rate; + int pdiv; + + val = pll_readl_base(pll); - if (val & PLL_BASE_BYPASS) + if ((pll->flags & TEGRA_PLL_BYPASS) && (val & PLL_BASE_BYPASS)) return parent_rate; if ((pll->flags & TEGRA_PLL_FIXED) && !(val & PLL_BASE_OVERRIDE)) { @@ -435,16 +551,29 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, return pll->fixed_rate; } - divp = (val >> pll->divp_shift) & (divp_mask(pll)); - if (pll->flags & TEGRA_PLLU) - divp ^= 1; + _get_pll_mnp(pll, &cfg); - divn = (val >> pll->divn_shift) & (divn_mask(pll)); - divm = (val >> pll->divm_shift) & (divm_mask(pll)); - divm *= (1 << divp); + if (p_tohw) { + while (p_tohw->pdiv) { + if (cfg.p == p_tohw->hw_val) { + pdiv = p_tohw->pdiv; + break; + } + p_tohw++; + } + + if (!p_tohw->pdiv) { + WARN_ON(1); + pdiv = 1; + } + } else + pdiv = 1 << cfg.p; + + cfg.m *= pdiv; + + rate *= cfg.n; + do_div(rate, cfg.m); - rate *= divn; - do_div(rate, divm); return rate; } @@ -538,8 +667,8 @@ static int clk_plle_enable(struct clk_hw *hw) val |= (PLL_BASE_BYPASS | PLL_BASE_ENABLE); pll_writel_base(val, pll); - clk_pll_wait_for_lock(pll, pll->clk_base + pll->params->misc_reg, - pll->params->lock_bit_idx); + clk_pll_wait_for_lock(pll); + return 0; } @@ -577,28 +706,531 @@ const struct clk_ops tegra_clk_plle_ops = { .enable = clk_plle_enable, }; -static struct clk *_tegra_clk_register_pll(const char *name, - const char *parent_name, void __iomem *clk_base, - void __iomem *pmc, unsigned long flags, - unsigned long fixed_rate, - struct tegra_clk_pll_params *pll_params, u8 pll_flags, - struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock, - const struct clk_ops *ops) +#ifdef CONFIG_ARCH_TEGRA_114_SOC + +static int _pll_fixed_mdiv(struct tegra_clk_pll_params *pll_params, + unsigned long parent_rate) +{ + if (parent_rate > pll_params->cf_max) + return 2; + else + return 1; +} + +static int clk_pll_iddq_enable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + + u32 val; + int ret; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + val = pll_readl(pll->params->iddq_reg, pll); + val &= ~BIT(pll->params->iddq_bit_idx); + pll_writel(val, pll->params->iddq_reg, pll); + udelay(2); + + _clk_pll_enable(hw); + + ret = clk_pll_wait_for_lock(pll); + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return 0; +} + +static void clk_pll_iddq_disable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + u32 val; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _clk_pll_disable(hw); + + val = pll_readl(pll->params->iddq_reg, pll); + val |= BIT(pll->params->iddq_bit_idx); + pll_writel(val, pll->params->iddq_reg, pll); + udelay(2); + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); +} + +static int _calc_dynamic_ramp_rate(struct clk_hw *hw, + struct tegra_clk_pll_freq_table *cfg, + unsigned long rate, unsigned long parent_rate) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned int p; + + if (!rate) + return -EINVAL; + + p = DIV_ROUND_UP(pll->params->vco_min, rate); + cfg->m = _pll_fixed_mdiv(pll->params, parent_rate); + cfg->p = p; + cfg->output_rate = rate * cfg->p; + cfg->n = cfg->output_rate * cfg->m / parent_rate; + + if (cfg->n > divn_max(pll) || cfg->output_rate > pll->params->vco_max) + return -EINVAL; + + return 0; +} + +static int _pll_ramp_calc_pll(struct clk_hw *hw, + struct tegra_clk_pll_freq_table *cfg, + unsigned long rate, unsigned long parent_rate) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + int err = 0; + + err = _get_table_rate(hw, cfg, rate, parent_rate); + if (err < 0) + err = _calc_dynamic_ramp_rate(hw, cfg, rate, parent_rate); + else if (cfg->m != _pll_fixed_mdiv(pll->params, parent_rate)) { + WARN_ON(1); + err = -EINVAL; + goto out; + } + + if (!cfg->p || (cfg->p > pll->params->max_p)) + err = -EINVAL; + +out: + return err; +} + +static int clk_pllxc_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + struct tegra_clk_pll_freq_table cfg, old_cfg; + unsigned long flags = 0; + int ret = 0; + u8 old_p; + + ret = _pll_ramp_calc_pll(hw, &cfg, rate, parent_rate); + if (ret < 0) + return ret; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _get_pll_mnp(pll, &old_cfg); + + old_p = pllxc_p[old_cfg.p]; + if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_p != cfg.p) { + cfg.p -= 1; + ret = _program_pll(hw, &cfg, rate); + } + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + +static long clk_pll_ramp_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct tegra_clk_pll_freq_table cfg; + int ret = 0; + u64 output_rate = *prate; + + ret = _pll_ramp_calc_pll(hw, &cfg, rate, *prate); + if (ret < 0) + return ret; + + output_rate *= cfg.n; + do_div(output_rate, cfg.m * cfg.p); + + return output_rate; +} + +static int clk_pllm_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct tegra_clk_pll_freq_table cfg; + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + int state, ret = 0; + u32 val; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + state = clk_pll_is_enabled(hw); + if (state) { + if (rate != clk_get_rate(hw->clk)) { + pr_err("%s: Cannot change active PLLM\n", __func__); + ret = -EINVAL; + goto out; + } + goto out; + } + + ret = _pll_ramp_calc_pll(hw, &cfg, rate, parent_rate); + if (ret < 0) + goto out; + + cfg.p -= 1; + + val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE); + if (val & PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE) { + val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE_2); + val = cfg.p ? (val | PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK) : + (val & ~PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK); + writel_relaxed(val, pll->pmc + PMC_PLLM_WB0_OVERRIDE_2); + + val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE); + val &= ~(divn_mask(pll) | divm_mask(pll)); + val |= (cfg.m << pll->divm_shift) | (cfg.n << pll->divn_shift); + writel_relaxed(val, pll->pmc + PMC_PLLM_WB0_OVERRIDE); + } else + _update_pll_mnp(pll, &cfg); + + +out: + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + +static void _pllcx_strobe(struct tegra_clk_pll *pll) +{ + u32 val; + + val = pll_readl_misc(pll); + val |= PLLCX_MISC_STROBE; + pll_writel_misc(val, pll); + udelay(2); + + val &= ~PLLCX_MISC_STROBE; + pll_writel_misc(val, pll); +} + +static int clk_pllc_enable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + u32 val; + int ret = 0; + unsigned long flags = 0; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _clk_pll_enable(hw); + udelay(2); + + val = pll_readl_misc(pll); + val &= ~PLLCX_MISC_RESET; + pll_writel_misc(val, pll); + udelay(2); + + _pllcx_strobe(pll); + + ret = clk_pll_wait_for_lock(pll); + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + +static void _clk_pllc_disable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + u32 val; + + _clk_pll_disable(hw); + + val = pll_readl_misc(pll); + val |= PLLCX_MISC_RESET; + pll_writel_misc(val, pll); + udelay(2); +} + +static void clk_pllc_disable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _clk_pllc_disable(hw); + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); +} + +static int _pllcx_update_dynamic_coef(struct tegra_clk_pll *pll, + unsigned long input_rate, u32 n) +{ + u32 val, n_threshold; + + switch (input_rate) { + case 12000000: + n_threshold = 70; + break; + case 13000000: + case 26000000: + n_threshold = 71; + break; + case 16800000: + n_threshold = 55; + break; + case 19200000: + n_threshold = 48; + break; + default: + pr_err("%s: Unexpected reference rate %lu\n", + __func__, input_rate); + return -EINVAL; + } + + val = pll_readl_misc(pll); + val &= ~(PLLCX_MISC_SDM_DIV_MASK | PLLCX_MISC_FILT_DIV_MASK); + val |= n <= n_threshold ? + PLLCX_MISC_DIV_LOW_RANGE : PLLCX_MISC_DIV_HIGH_RANGE; + pll_writel_misc(val, pll); + + return 0; +} + +static int clk_pllc_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct tegra_clk_pll_freq_table cfg; + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + int state, ret = 0; + u32 val; + u16 old_m, old_n; + u8 old_p; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + ret = _pll_ramp_calc_pll(hw, &cfg, rate, parent_rate); + if (ret < 0) + goto out; + + val = pll_readl_base(pll); + old_m = (val >> pll->divm_shift) & (divm_mask(pll)); + old_n = (val >> pll->divn_shift) & (divn_mask(pll)); + old_p = pllcx_p[(val >> pll->divp_shift) & (divp_mask(pll))]; + + if (cfg.m != old_m) { + WARN_ON(1); + goto out; + } + + if (old_n == cfg.n && old_p == cfg.p) + goto out; + + cfg.p -= 1; + + state = clk_pll_is_enabled(hw); + if (state) + _clk_pllc_disable(hw); + + ret = _pllcx_update_dynamic_coef(pll, parent_rate, cfg.n); + if (ret < 0) + goto out; + + _update_pll_mnp(pll, &cfg); + + if (state) + ret = clk_pllc_enable(hw); + +out: + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + +static long _pllre_calc_rate(struct tegra_clk_pll *pll, + struct tegra_clk_pll_freq_table *cfg, + unsigned long rate, unsigned long parent_rate) +{ + u16 m, n; + u64 output_rate = parent_rate; + + m = _pll_fixed_mdiv(pll->params, parent_rate); + n = rate * m / parent_rate; + + output_rate *= n; + do_div(output_rate, m); + + if (cfg) { + cfg->m = m; + cfg->n = n; + } + + return output_rate; +} +static int clk_pllre_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct tegra_clk_pll_freq_table cfg, old_cfg; + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + int state, ret = 0; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _pllre_calc_rate(pll, &cfg, rate, parent_rate); + _get_pll_mnp(pll, &old_cfg); + cfg.p = old_cfg.p; + + if (cfg.m != old_cfg.m || cfg.n != old_cfg.n) { + state = clk_pll_is_enabled(hw); + if (state) + _clk_pll_disable(hw); + + _update_pll_mnp(pll, &cfg); + + if (state) { + _clk_pll_enable(hw); + ret = clk_pll_wait_for_lock(pll); + } + } + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + +static unsigned long clk_pllre_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct tegra_clk_pll_freq_table cfg; + struct tegra_clk_pll *pll = to_clk_pll(hw); + u64 rate = parent_rate; + + _get_pll_mnp(pll, &cfg); + + rate *= cfg.n; + do_div(rate, cfg.m); + + return rate; +} + +static long clk_pllre_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + + return _pllre_calc_rate(pll, NULL, rate, *prate); +} + +static int clk_plle_tegra114_enable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + struct tegra_clk_pll_freq_table sel; + u32 val; + int ret; + unsigned long flags = 0; + unsigned long input_rate = clk_get_rate(clk_get_parent(hw->clk)); + + if (_get_table_rate(hw, &sel, pll->fixed_rate, input_rate)) + return -EINVAL; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + val = pll_readl_base(pll); + val &= ~BIT(29); /* Disable lock override */ + pll_writel_base(val, pll); + + val = pll_readl(pll->params->aux_reg, pll); + val |= PLLE_AUX_ENABLE_SWCTL; + val &= ~PLLE_AUX_SEQ_ENABLE; + pll_writel(val, pll->params->aux_reg, pll); + udelay(1); + + val = pll_readl_misc(pll); + val |= PLLE_MISC_LOCK_ENABLE; + val |= PLLE_MISC_IDDQ_SW_CTRL; + val &= ~PLLE_MISC_IDDQ_SW_VALUE; + val |= PLLE_MISC_PLLE_PTS; + val |= PLLE_MISC_VREG_BG_CTRL_MASK | PLLE_MISC_VREG_CTRL_MASK; + pll_writel_misc(val, pll); + udelay(5); + + val = pll_readl(PLLE_SS_CTRL, pll); + val |= PLLE_SS_DISABLE; + pll_writel(val, PLLE_SS_CTRL, pll); + + val = pll_readl_base(pll); + val &= ~(divm_mask(pll) | divn_mask(pll) | divp_mask(pll)); + val &= ~(PLLE_BASE_DIVCML_WIDTH << PLLE_BASE_DIVCML_SHIFT); + val |= sel.m << pll->divm_shift; + val |= sel.n << pll->divn_shift; + val |= sel.cpcon << PLLE_BASE_DIVCML_SHIFT; + pll_writel_base(val, pll); + udelay(1); + + _clk_pll_enable(hw); + ret = clk_pll_wait_for_lock(pll); + + if (ret < 0) + goto out; + + /* TODO: enable hw control of xusb brick pll */ + +out: + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); + + return ret; +} + +static void clk_plle_tegra114_disable(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + u32 val; + + if (pll->lock) + spin_lock_irqsave(pll->lock, flags); + + _clk_pll_disable(hw); + + val = pll_readl_misc(pll); + val |= PLLE_MISC_IDDQ_SW_CTRL | PLLE_MISC_IDDQ_SW_VALUE; + pll_writel_misc(val, pll); + udelay(1); + + if (pll->lock) + spin_unlock_irqrestore(pll->lock, flags); +} +#endif + +static struct tegra_clk_pll *_tegra_init_pll(void __iomem *clk_base, + void __iomem *pmc, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock) { struct tegra_clk_pll *pll; - struct clk *clk; - struct clk_init_data init; pll = kzalloc(sizeof(*pll), GFP_KERNEL); if (!pll) return ERR_PTR(-ENOMEM); - init.name = name; - init.ops = ops; - init.flags = flags; - init.parent_names = (parent_name ? &parent_name : NULL); - init.num_parents = (parent_name ? 1 : 0); - pll->clk_base = clk_base; pll->pmc = pmc; @@ -615,34 +1247,336 @@ static struct clk *_tegra_clk_register_pll(const char *name, pll->divm_shift = PLL_BASE_DIVM_SHIFT; pll->divm_width = PLL_BASE_DIVM_WIDTH; + return pll; +} + +static struct clk *_tegra_clk_register_pll(struct tegra_clk_pll *pll, + const char *name, const char *parent_name, unsigned long flags, + const struct clk_ops *ops) +{ + struct clk_init_data init; + + init.name = name; + init.ops = ops; + init.flags = flags; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + /* Data in .init is copied by clk_register(), so stack variable OK */ pll->hw.init = &init; - clk = clk_register(NULL, &pll->hw); - if (IS_ERR(clk)) - kfree(pll); - - return clk; + return clk_register(NULL, &pll->hw); } struct clk *tegra_clk_register_pll(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, unsigned long fixed_rate, - struct tegra_clk_pll_params *pll_params, u8 pll_flags, + struct tegra_clk_pll_params *pll_params, u32 pll_flags, struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock) { - return _tegra_clk_register_pll(name, parent_name, clk_base, pmc, - flags, fixed_rate, pll_params, pll_flags, freq_table, - lock, &tegra_clk_pll_ops); + struct tegra_clk_pll *pll; + struct clk *clk; + + pll_flags |= TEGRA_PLL_BYPASS; + pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE; + pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, + freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_pll_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; } struct clk *tegra_clk_register_plle(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, unsigned long fixed_rate, - struct tegra_clk_pll_params *pll_params, u8 pll_flags, + struct tegra_clk_pll_params *pll_params, u32 pll_flags, struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock) { - return _tegra_clk_register_pll(name, parent_name, clk_base, pmc, - flags, fixed_rate, pll_params, pll_flags, freq_table, - lock, &tegra_clk_plle_ops); + struct tegra_clk_pll *pll; + struct clk *clk; + + pll_flags |= TEGRA_PLL_LOCK_MISC | TEGRA_PLL_BYPASS; + pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE; + pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, + freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_plle_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} + +#ifdef CONFIG_ARCH_TEGRA_114_SOC +const struct clk_ops tegra_clk_pllxc_ops = { + .is_enabled = clk_pll_is_enabled, + .enable = clk_pll_iddq_enable, + .disable = clk_pll_iddq_disable, + .recalc_rate = clk_pll_recalc_rate, + .round_rate = clk_pll_ramp_round_rate, + .set_rate = clk_pllxc_set_rate, +}; + +const struct clk_ops tegra_clk_pllm_ops = { + .is_enabled = clk_pll_is_enabled, + .enable = clk_pll_iddq_enable, + .disable = clk_pll_iddq_disable, + .recalc_rate = clk_pll_recalc_rate, + .round_rate = clk_pll_ramp_round_rate, + .set_rate = clk_pllm_set_rate, +}; + +const struct clk_ops tegra_clk_pllc_ops = { + .is_enabled = clk_pll_is_enabled, + .enable = clk_pllc_enable, + .disable = clk_pllc_disable, + .recalc_rate = clk_pll_recalc_rate, + .round_rate = clk_pll_ramp_round_rate, + .set_rate = clk_pllc_set_rate, +}; + +const struct clk_ops tegra_clk_pllre_ops = { + .is_enabled = clk_pll_is_enabled, + .enable = clk_pll_iddq_enable, + .disable = clk_pll_iddq_disable, + .recalc_rate = clk_pllre_recalc_rate, + .round_rate = clk_pllre_round_rate, + .set_rate = clk_pllre_set_rate, +}; + +const struct clk_ops tegra_clk_plle_tegra114_ops = { + .is_enabled = clk_pll_is_enabled, + .enable = clk_plle_tegra114_enable, + .disable = clk_plle_tegra114_disable, + .recalc_rate = clk_pll_recalc_rate, +}; + + +struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock) +{ + struct tegra_clk_pll *pll; + struct clk *clk; + + if (!pll_params->pdiv_tohw) + return ERR_PTR(-EINVAL); + + pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE; + pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, + freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_pllxc_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} + +struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock, unsigned long parent_rate) +{ + u32 val; + struct tegra_clk_pll *pll; + struct clk *clk; + + pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE; + pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, + freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + /* program minimum rate by default */ + + val = pll_readl_base(pll); + if (val & PLL_BASE_ENABLE) + WARN_ON(val & pll_params->iddq_bit_idx); + else { + int m; + + m = _pll_fixed_mdiv(pll_params, parent_rate); + val = m << PLL_BASE_DIVM_SHIFT; + val |= (pll_params->vco_min / parent_rate) + << PLL_BASE_DIVN_SHIFT; + pll_writel_base(val, pll); + } + + /* disable lock override */ + + val = pll_readl_misc(pll); + val &= ~BIT(29); + pll_writel_misc(val, pll); + + pll_flags |= TEGRA_PLL_LOCK_MISC; + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_pllre_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} + +struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock) +{ + struct tegra_clk_pll *pll; + struct clk *clk; + + if (!pll_params->pdiv_tohw) + return ERR_PTR(-EINVAL); + + pll_flags |= TEGRA_PLL_BYPASS; + pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE; + pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, + freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_pllm_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} + +struct clk *tegra_clk_register_pllc(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock) +{ + struct clk *parent, *clk; + struct pdiv_map *p_tohw = pll_params->pdiv_tohw; + struct tegra_clk_pll *pll; + struct tegra_clk_pll_freq_table cfg; + unsigned long parent_rate; + + if (!p_tohw) + return ERR_PTR(-EINVAL); + + parent = __clk_lookup(parent_name); + if (IS_ERR(parent)) { + WARN(1, "parent clk %s of %s must be registered first\n", + name, parent_name); + return ERR_PTR(-EINVAL); + } + + pll_flags |= TEGRA_PLL_BYPASS; + pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags, + freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + parent_rate = __clk_get_rate(parent); + + /* + * Most of PLLC register fields are shadowed, and can not be read + * directly from PLL h/w. Hence, actual PLLC boot state is unknown. + * Initialize PLL to default state: disabled, reset; shadow registers + * loaded with default parameters; dividers are preset for half of + * minimum VCO rate (the latter assured that shadowed divider settings + * are within supported range). + */ + + cfg.m = _pll_fixed_mdiv(pll_params, parent_rate); + cfg.n = cfg.m * pll_params->vco_min / parent_rate; + + while (p_tohw->pdiv) { + if (p_tohw->pdiv == 2) { + cfg.p = p_tohw->hw_val; + break; + } + p_tohw++; + } + + if (!p_tohw->pdiv) { + WARN_ON(1); + return ERR_PTR(-EINVAL); + } + + pll_writel_base(0, pll); + _update_pll_mnp(pll, &cfg); + + pll_writel_misc(PLLCX_MISC_DEFAULT, pll); + pll_writel(PLLCX_MISC1_DEFAULT, pll_params->ext_misc_reg[0], pll); + pll_writel(PLLCX_MISC2_DEFAULT, pll_params->ext_misc_reg[1], pll); + pll_writel(PLLCX_MISC3_DEFAULT, pll_params->ext_misc_reg[2], pll); + + _pllcx_update_dynamic_coef(pll, parent_rate, cfg.n); + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_pllc_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} + +struct clk *tegra_clk_register_plle_tegra114(const char *name, + const char *parent_name, + void __iomem *clk_base, unsigned long flags, + unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock) +{ + struct tegra_clk_pll *pll; + struct clk *clk; + u32 val, val_aux; + + pll = _tegra_init_pll(clk_base, NULL, fixed_rate, pll_params, + TEGRA_PLL_HAS_LOCK_ENABLE, freq_table, lock); + if (IS_ERR(pll)) + return ERR_CAST(pll); + + /* ensure parent is set to pll_re_vco */ + + val = pll_readl_base(pll); + val_aux = pll_readl(pll_params->aux_reg, pll); + + if (val & PLL_BASE_ENABLE) { + if (!(val_aux & PLLE_AUX_PLLRE_SEL)) + WARN(1, "pll_e enabled with unsupported parent %s\n", + (val & PLLE_AUX_PLLP_SEL) ? "pllp_out0" : "pll_ref"); + } else { + val_aux |= PLLE_AUX_PLLRE_SEL; + pll_writel(val, pll_params->aux_reg, pll); + } + + clk = _tegra_clk_register_pll(pll, name, parent_name, flags, + &tegra_clk_plle_tegra114_ops); + if (IS_ERR(clk)) + kfree(pll); + + return clk; } +#endif diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c new file mode 100644 index 000000000000..d78e16ee161c --- /dev/null +++ b/drivers/clk/tegra/clk-tegra114.c @@ -0,0 +1,2085 @@ +/* + * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/delay.h> +#include <linux/clk/tegra.h> + +#include "clk.h" + +#define RST_DEVICES_L 0x004 +#define RST_DEVICES_H 0x008 +#define RST_DEVICES_U 0x00C +#define RST_DEVICES_V 0x358 +#define RST_DEVICES_W 0x35C +#define RST_DEVICES_X 0x28C +#define RST_DEVICES_SET_L 0x300 +#define RST_DEVICES_CLR_L 0x304 +#define RST_DEVICES_SET_H 0x308 +#define RST_DEVICES_CLR_H 0x30c +#define RST_DEVICES_SET_U 0x310 +#define RST_DEVICES_CLR_U 0x314 +#define RST_DEVICES_SET_V 0x430 +#define RST_DEVICES_CLR_V 0x434 +#define RST_DEVICES_SET_W 0x438 +#define RST_DEVICES_CLR_W 0x43c +#define RST_DEVICES_NUM 5 + +#define CLK_OUT_ENB_L 0x010 +#define CLK_OUT_ENB_H 0x014 +#define CLK_OUT_ENB_U 0x018 +#define CLK_OUT_ENB_V 0x360 +#define CLK_OUT_ENB_W 0x364 +#define CLK_OUT_ENB_X 0x280 +#define CLK_OUT_ENB_SET_L 0x320 +#define CLK_OUT_ENB_CLR_L 0x324 +#define CLK_OUT_ENB_SET_H 0x328 +#define CLK_OUT_ENB_CLR_H 0x32c +#define CLK_OUT_ENB_SET_U 0x330 +#define CLK_OUT_ENB_CLR_U 0x334 +#define CLK_OUT_ENB_SET_V 0x440 +#define CLK_OUT_ENB_CLR_V 0x444 +#define CLK_OUT_ENB_SET_W 0x448 +#define CLK_OUT_ENB_CLR_W 0x44c +#define CLK_OUT_ENB_SET_X 0x284 +#define CLK_OUT_ENB_CLR_X 0x288 +#define CLK_OUT_ENB_NUM 6 + +#define PLLC_BASE 0x80 +#define PLLC_MISC2 0x88 +#define PLLC_MISC 0x8c +#define PLLC2_BASE 0x4e8 +#define PLLC2_MISC 0x4ec +#define PLLC3_BASE 0x4fc +#define PLLC3_MISC 0x500 +#define PLLM_BASE 0x90 +#define PLLM_MISC 0x9c +#define PLLP_BASE 0xa0 +#define PLLP_MISC 0xac +#define PLLX_BASE 0xe0 +#define PLLX_MISC 0xe4 +#define PLLX_MISC2 0x514 +#define PLLX_MISC3 0x518 +#define PLLD_BASE 0xd0 +#define PLLD_MISC 0xdc +#define PLLD2_BASE 0x4b8 +#define PLLD2_MISC 0x4bc +#define PLLE_BASE 0xe8 +#define PLLE_MISC 0xec +#define PLLA_BASE 0xb0 +#define PLLA_MISC 0xbc +#define PLLU_BASE 0xc0 +#define PLLU_MISC 0xcc +#define PLLRE_BASE 0x4c4 +#define PLLRE_MISC 0x4c8 + +#define PLL_MISC_LOCK_ENABLE 18 +#define PLLC_MISC_LOCK_ENABLE 24 +#define PLLDU_MISC_LOCK_ENABLE 22 +#define PLLE_MISC_LOCK_ENABLE 9 +#define PLLRE_MISC_LOCK_ENABLE 30 + +#define PLLC_IDDQ_BIT 26 +#define PLLX_IDDQ_BIT 3 +#define PLLRE_IDDQ_BIT 16 + +#define PLL_BASE_LOCK BIT(27) +#define PLLE_MISC_LOCK BIT(11) +#define PLLRE_MISC_LOCK BIT(24) +#define PLLCX_BASE_LOCK (BIT(26)|BIT(27)) + +#define PLLE_AUX 0x48c +#define PLLC_OUT 0x84 +#define PLLM_OUT 0x94 +#define PLLP_OUTA 0xa4 +#define PLLP_OUTB 0xa8 +#define PLLA_OUT 0xb4 + +#define AUDIO_SYNC_CLK_I2S0 0x4a0 +#define AUDIO_SYNC_CLK_I2S1 0x4a4 +#define AUDIO_SYNC_CLK_I2S2 0x4a8 +#define AUDIO_SYNC_CLK_I2S3 0x4ac +#define AUDIO_SYNC_CLK_I2S4 0x4b0 +#define AUDIO_SYNC_CLK_SPDIF 0x4b4 + +#define AUDIO_SYNC_DOUBLER 0x49c + +#define PMC_CLK_OUT_CNTRL 0x1a8 +#define PMC_DPD_PADS_ORIDE 0x1c +#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20 +#define PMC_CTRL 0 +#define PMC_CTRL_BLINK_ENB 7 + +#define OSC_CTRL 0x50 +#define OSC_CTRL_OSC_FREQ_SHIFT 28 +#define OSC_CTRL_PLL_REF_DIV_SHIFT 26 + +#define PLLXC_SW_MAX_P 6 + +#define CCLKG_BURST_POLICY 0x368 +#define CCLKLP_BURST_POLICY 0x370 +#define SCLK_BURST_POLICY 0x028 +#define SYSTEM_CLK_RATE 0x030 + +#define UTMIP_PLL_CFG2 0x488 +#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6) +#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2) +#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4) + +#define UTMIP_PLL_CFG1 0x484 +#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6) +#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) +#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17) +#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16) +#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15) +#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14) +#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12) + +#define UTMIPLL_HW_PWRDN_CFG0 0x52c +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25) +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24) +#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6) +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5) +#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4) +#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2) +#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1) +#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0) + +#define CLK_SOURCE_I2S0 0x1d8 +#define CLK_SOURCE_I2S1 0x100 +#define CLK_SOURCE_I2S2 0x104 +#define CLK_SOURCE_NDFLASH 0x160 +#define CLK_SOURCE_I2S3 0x3bc +#define CLK_SOURCE_I2S4 0x3c0 +#define CLK_SOURCE_SPDIF_OUT 0x108 +#define CLK_SOURCE_SPDIF_IN 0x10c +#define CLK_SOURCE_PWM 0x110 +#define CLK_SOURCE_ADX 0x638 +#define CLK_SOURCE_AMX 0x63c +#define CLK_SOURCE_HDA 0x428 +#define CLK_SOURCE_HDA2CODEC_2X 0x3e4 +#define CLK_SOURCE_SBC1 0x134 +#define CLK_SOURCE_SBC2 0x118 +#define CLK_SOURCE_SBC3 0x11c +#define CLK_SOURCE_SBC4 0x1b4 +#define CLK_SOURCE_SBC5 0x3c8 +#define CLK_SOURCE_SBC6 0x3cc +#define CLK_SOURCE_SATA_OOB 0x420 +#define CLK_SOURCE_SATA 0x424 +#define CLK_SOURCE_NDSPEED 0x3f8 +#define CLK_SOURCE_VFIR 0x168 +#define CLK_SOURCE_SDMMC1 0x150 +#define CLK_SOURCE_SDMMC2 0x154 +#define CLK_SOURCE_SDMMC3 0x1bc +#define CLK_SOURCE_SDMMC4 0x164 +#define CLK_SOURCE_VDE 0x1c8 +#define CLK_SOURCE_CSITE 0x1d4 +#define CLK_SOURCE_LA 0x1f8 +#define CLK_SOURCE_TRACE 0x634 +#define CLK_SOURCE_OWR 0x1cc +#define CLK_SOURCE_NOR 0x1d0 +#define CLK_SOURCE_MIPI 0x174 +#define CLK_SOURCE_I2C1 0x124 +#define CLK_SOURCE_I2C2 0x198 +#define CLK_SOURCE_I2C3 0x1b8 +#define CLK_SOURCE_I2C4 0x3c4 +#define CLK_SOURCE_I2C5 0x128 +#define CLK_SOURCE_UARTA 0x178 +#define CLK_SOURCE_UARTB 0x17c +#define CLK_SOURCE_UARTC 0x1a0 +#define CLK_SOURCE_UARTD 0x1c0 +#define CLK_SOURCE_UARTE 0x1c4 +#define CLK_SOURCE_UARTA_DBG 0x178 +#define CLK_SOURCE_UARTB_DBG 0x17c +#define CLK_SOURCE_UARTC_DBG 0x1a0 +#define CLK_SOURCE_UARTD_DBG 0x1c0 +#define CLK_SOURCE_UARTE_DBG 0x1c4 +#define CLK_SOURCE_3D 0x158 +#define CLK_SOURCE_2D 0x15c +#define CLK_SOURCE_VI_SENSOR 0x1a8 +#define CLK_SOURCE_VI 0x148 +#define CLK_SOURCE_EPP 0x16c +#define CLK_SOURCE_MSENC 0x1f0 +#define CLK_SOURCE_TSEC 0x1f4 +#define CLK_SOURCE_HOST1X 0x180 +#define CLK_SOURCE_HDMI 0x18c +#define CLK_SOURCE_DISP1 0x138 +#define CLK_SOURCE_DISP2 0x13c +#define CLK_SOURCE_CILAB 0x614 +#define CLK_SOURCE_CILCD 0x618 +#define CLK_SOURCE_CILE 0x61c +#define CLK_SOURCE_DSIALP 0x620 +#define CLK_SOURCE_DSIBLP 0x624 +#define CLK_SOURCE_TSENSOR 0x3b8 +#define CLK_SOURCE_D_AUDIO 0x3d0 +#define CLK_SOURCE_DAM0 0x3d8 +#define CLK_SOURCE_DAM1 0x3dc +#define CLK_SOURCE_DAM2 0x3e0 +#define CLK_SOURCE_ACTMON 0x3e8 +#define CLK_SOURCE_EXTERN1 0x3ec +#define CLK_SOURCE_EXTERN2 0x3f0 +#define CLK_SOURCE_EXTERN3 0x3f4 +#define CLK_SOURCE_I2CSLOW 0x3fc +#define CLK_SOURCE_SE 0x42c +#define CLK_SOURCE_MSELECT 0x3b4 +#define CLK_SOURCE_SOC_THERM 0x644 +#define CLK_SOURCE_XUSB_HOST_SRC 0x600 +#define CLK_SOURCE_XUSB_FALCON_SRC 0x604 +#define CLK_SOURCE_XUSB_FS_SRC 0x608 +#define CLK_SOURCE_XUSB_SS_SRC 0x610 +#define CLK_SOURCE_XUSB_DEV_SRC 0x60c +#define CLK_SOURCE_EMC 0x19c + +static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32]; + +static void __iomem *clk_base; +static void __iomem *pmc_base; + +static DEFINE_SPINLOCK(pll_d_lock); +static DEFINE_SPINLOCK(pll_d2_lock); +static DEFINE_SPINLOCK(pll_u_lock); +static DEFINE_SPINLOCK(pll_div_lock); +static DEFINE_SPINLOCK(pll_re_lock); +static DEFINE_SPINLOCK(clk_doubler_lock); +static DEFINE_SPINLOCK(clk_out_lock); +static DEFINE_SPINLOCK(sysrate_lock); + +static struct pdiv_map pllxc_p[] = { + { .pdiv = 1, .hw_val = 0 }, + { .pdiv = 2, .hw_val = 1 }, + { .pdiv = 3, .hw_val = 2 }, + { .pdiv = 4, .hw_val = 3 }, + { .pdiv = 5, .hw_val = 4 }, + { .pdiv = 6, .hw_val = 5 }, + { .pdiv = 8, .hw_val = 6 }, + { .pdiv = 10, .hw_val = 7 }, + { .pdiv = 12, .hw_val = 8 }, + { .pdiv = 16, .hw_val = 9 }, + { .pdiv = 12, .hw_val = 10 }, + { .pdiv = 16, .hw_val = 11 }, + { .pdiv = 20, .hw_val = 12 }, + { .pdiv = 24, .hw_val = 13 }, + { .pdiv = 32, .hw_val = 14 }, + { .pdiv = 0, .hw_val = 0 }, +}; + +static struct tegra_clk_pll_freq_table pll_c_freq_table[] = { + { 12000000, 624000000, 104, 0, 2}, + { 12000000, 600000000, 100, 0, 2}, + { 13000000, 600000000, 92, 0, 2}, /* actual: 598.0 MHz */ + { 16800000, 600000000, 71, 0, 2}, /* actual: 596.4 MHz */ + { 19200000, 600000000, 62, 0, 2}, /* actual: 595.2 MHz */ + { 26000000, 600000000, 92, 1, 2}, /* actual: 598.0 MHz */ + { 0, 0, 0, 0, 0, 0 }, +}; + +static struct tegra_clk_pll_params pll_c_params = { + .input_min = 12000000, + .input_max = 800000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */ + .vco_min = 600000000, + .vco_max = 1400000000, + .base_reg = PLLC_BASE, + .misc_reg = PLLC_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLC_MISC_LOCK_ENABLE, + .lock_delay = 300, + .iddq_reg = PLLC_MISC, + .iddq_bit_idx = PLLC_IDDQ_BIT, + .max_p = PLLXC_SW_MAX_P, + .dyn_ramp_reg = PLLC_MISC2, + .stepa_shift = 17, + .stepb_shift = 9, + .pdiv_tohw = pllxc_p, +}; + +static struct pdiv_map pllc_p[] = { + { .pdiv = 1, .hw_val = 0 }, + { .pdiv = 2, .hw_val = 1 }, + { .pdiv = 4, .hw_val = 3 }, + { .pdiv = 8, .hw_val = 5 }, + { .pdiv = 16, .hw_val = 7 }, + { .pdiv = 0, .hw_val = 0 }, +}; + +static struct tegra_clk_pll_freq_table pll_cx_freq_table[] = { + {12000000, 600000000, 100, 0, 2}, + {13000000, 600000000, 92, 0, 2}, /* actual: 598.0 MHz */ + {16800000, 600000000, 71, 0, 2}, /* actual: 596.4 MHz */ + {19200000, 600000000, 62, 0, 2}, /* actual: 595.2 MHz */ + {26000000, 600000000, 92, 1, 2}, /* actual: 598.0 MHz */ + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_c2_params = { + .input_min = 12000000, + .input_max = 48000000, + .cf_min = 12000000, + .cf_max = 19200000, + .vco_min = 600000000, + .vco_max = 1200000000, + .base_reg = PLLC2_BASE, + .misc_reg = PLLC2_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .pdiv_tohw = pllc_p, + .ext_misc_reg[0] = 0x4f0, + .ext_misc_reg[1] = 0x4f4, + .ext_misc_reg[2] = 0x4f8, +}; + +static struct tegra_clk_pll_params pll_c3_params = { + .input_min = 12000000, + .input_max = 48000000, + .cf_min = 12000000, + .cf_max = 19200000, + .vco_min = 600000000, + .vco_max = 1200000000, + .base_reg = PLLC3_BASE, + .misc_reg = PLLC3_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .pdiv_tohw = pllc_p, + .ext_misc_reg[0] = 0x504, + .ext_misc_reg[1] = 0x508, + .ext_misc_reg[2] = 0x50c, +}; + +static struct pdiv_map pllm_p[] = { + { .pdiv = 1, .hw_val = 0 }, + { .pdiv = 2, .hw_val = 1 }, + { .pdiv = 0, .hw_val = 0 }, +}; + +static struct tegra_clk_pll_freq_table pll_m_freq_table[] = { + {12000000, 800000000, 66, 0, 1}, /* actual: 792.0 MHz */ + {13000000, 800000000, 61, 0, 1}, /* actual: 793.0 MHz */ + {16800000, 800000000, 47, 0, 1}, /* actual: 789.6 MHz */ + {19200000, 800000000, 41, 0, 1}, /* actual: 787.2 MHz */ + {26000000, 800000000, 61, 1, 1}, /* actual: 793.0 MHz */ + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_m_params = { + .input_min = 12000000, + .input_max = 500000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */ + .vco_min = 400000000, + .vco_max = 1066000000, + .base_reg = PLLM_BASE, + .misc_reg = PLLM_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .max_p = 2, + .pdiv_tohw = pllm_p, +}; + +static struct tegra_clk_pll_freq_table pll_p_freq_table[] = { + {12000000, 216000000, 432, 12, 1, 8}, + {13000000, 216000000, 432, 13, 1, 8}, + {16800000, 216000000, 360, 14, 1, 8}, + {19200000, 216000000, 360, 16, 1, 8}, + {26000000, 216000000, 432, 26, 1, 8}, + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_p_params = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 200000000, + .vco_max = 700000000, + .base_reg = PLLP_BASE, + .misc_reg = PLLP_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, +}; + +static struct tegra_clk_pll_freq_table pll_a_freq_table[] = { + {9600000, 282240000, 147, 5, 0, 4}, + {9600000, 368640000, 192, 5, 0, 4}, + {9600000, 240000000, 200, 8, 0, 8}, + + {28800000, 282240000, 245, 25, 0, 8}, + {28800000, 368640000, 320, 25, 0, 8}, + {28800000, 240000000, 200, 24, 0, 8}, + {0, 0, 0, 0, 0, 0}, +}; + + +static struct tegra_clk_pll_params pll_a_params = { + .input_min = 2000000, + .input_max = 31000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 200000000, + .vco_max = 700000000, + .base_reg = PLLA_BASE, + .misc_reg = PLLA_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, +}; + +static struct tegra_clk_pll_freq_table pll_d_freq_table[] = { + {12000000, 216000000, 864, 12, 2, 12}, + {13000000, 216000000, 864, 13, 2, 12}, + {16800000, 216000000, 720, 14, 2, 12}, + {19200000, 216000000, 720, 16, 2, 12}, + {26000000, 216000000, 864, 26, 2, 12}, + + {12000000, 594000000, 594, 12, 0, 12}, + {13000000, 594000000, 594, 13, 0, 12}, + {16800000, 594000000, 495, 14, 0, 12}, + {19200000, 594000000, 495, 16, 0, 12}, + {26000000, 594000000, 594, 26, 0, 12}, + + {12000000, 1000000000, 1000, 12, 0, 12}, + {13000000, 1000000000, 1000, 13, 0, 12}, + {19200000, 1000000000, 625, 12, 0, 12}, + {26000000, 1000000000, 1000, 26, 0, 12}, + + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_d_params = { + .input_min = 2000000, + .input_max = 40000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 500000000, + .vco_max = 1000000000, + .base_reg = PLLD_BASE, + .misc_reg = PLLD_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, + .lock_delay = 1000, +}; + +static struct tegra_clk_pll_params pll_d2_params = { + .input_min = 2000000, + .input_max = 40000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 500000000, + .vco_max = 1000000000, + .base_reg = PLLD2_BASE, + .misc_reg = PLLD2_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, + .lock_delay = 1000, +}; + +static struct pdiv_map pllu_p[] = { + { .pdiv = 1, .hw_val = 1 }, + { .pdiv = 2, .hw_val = 0 }, + { .pdiv = 0, .hw_val = 0 }, +}; + +static struct tegra_clk_pll_freq_table pll_u_freq_table[] = { + {12000000, 480000000, 960, 12, 0, 12}, + {13000000, 480000000, 960, 13, 0, 12}, + {16800000, 480000000, 400, 7, 0, 5}, + {19200000, 480000000, 200, 4, 0, 3}, + {26000000, 480000000, 960, 26, 0, 12}, + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_u_params = { + .input_min = 2000000, + .input_max = 40000000, + .cf_min = 1000000, + .cf_max = 6000000, + .vco_min = 480000000, + .vco_max = 960000000, + .base_reg = PLLU_BASE, + .misc_reg = PLLU_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, + .lock_delay = 1000, + .pdiv_tohw = pllu_p, +}; + +static struct tegra_clk_pll_freq_table pll_x_freq_table[] = { + /* 1 GHz */ + {12000000, 1000000000, 83, 0, 1}, /* actual: 996.0 MHz */ + {13000000, 1000000000, 76, 0, 1}, /* actual: 988.0 MHz */ + {16800000, 1000000000, 59, 0, 1}, /* actual: 991.2 MHz */ + {19200000, 1000000000, 52, 0, 1}, /* actual: 998.4 MHz */ + {26000000, 1000000000, 76, 1, 1}, /* actual: 988.0 MHz */ + + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_x_params = { + .input_min = 12000000, + .input_max = 800000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */ + .vco_min = 700000000, + .vco_max = 2400000000U, + .base_reg = PLLX_BASE, + .misc_reg = PLLX_MISC, + .lock_mask = PLL_BASE_LOCK, + .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, + .lock_delay = 300, + .iddq_reg = PLLX_MISC3, + .iddq_bit_idx = PLLX_IDDQ_BIT, + .max_p = PLLXC_SW_MAX_P, + .dyn_ramp_reg = PLLX_MISC2, + .stepa_shift = 16, + .stepb_shift = 24, + .pdiv_tohw = pllxc_p, +}; + +static struct tegra_clk_pll_freq_table pll_e_freq_table[] = { + /* PLLE special case: use cpcon field to store cml divider value */ + {336000000, 100000000, 100, 21, 16, 11}, + {312000000, 100000000, 200, 26, 24, 13}, + {0, 0, 0, 0, 0, 0}, +}; + +static struct tegra_clk_pll_params pll_e_params = { + .input_min = 12000000, + .input_max = 1000000000, + .cf_min = 12000000, + .cf_max = 75000000, + .vco_min = 1600000000, + .vco_max = 2400000000U, + .base_reg = PLLE_BASE, + .misc_reg = PLLE_MISC, + .aux_reg = PLLE_AUX, + .lock_mask = PLLE_MISC_LOCK, + .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE, + .lock_delay = 300, +}; + +static struct tegra_clk_pll_params pll_re_vco_params = { + .input_min = 12000000, + .input_max = 1000000000, + .cf_min = 12000000, + .cf_max = 19200000, /* s/w policy, h/w capability 38 MHz */ + .vco_min = 300000000, + .vco_max = 600000000, + .base_reg = PLLRE_BASE, + .misc_reg = PLLRE_MISC, + .lock_mask = PLLRE_MISC_LOCK, + .lock_enable_bit_idx = PLLRE_MISC_LOCK_ENABLE, + .lock_delay = 300, + .iddq_reg = PLLRE_MISC, + .iddq_bit_idx = PLLRE_IDDQ_BIT, +}; + +/* Peripheral clock registers */ + +static struct tegra_clk_periph_regs periph_l_regs = { + .enb_reg = CLK_OUT_ENB_L, + .enb_set_reg = CLK_OUT_ENB_SET_L, + .enb_clr_reg = CLK_OUT_ENB_CLR_L, + .rst_reg = RST_DEVICES_L, + .rst_set_reg = RST_DEVICES_SET_L, + .rst_clr_reg = RST_DEVICES_CLR_L, +}; + +static struct tegra_clk_periph_regs periph_h_regs = { + .enb_reg = CLK_OUT_ENB_H, + .enb_set_reg = CLK_OUT_ENB_SET_H, + .enb_clr_reg = CLK_OUT_ENB_CLR_H, + .rst_reg = RST_DEVICES_H, + .rst_set_reg = RST_DEVICES_SET_H, + .rst_clr_reg = RST_DEVICES_CLR_H, +}; + +static struct tegra_clk_periph_regs periph_u_regs = { + .enb_reg = CLK_OUT_ENB_U, + .enb_set_reg = CLK_OUT_ENB_SET_U, + .enb_clr_reg = CLK_OUT_ENB_CLR_U, + .rst_reg = RST_DEVICES_U, + .rst_set_reg = RST_DEVICES_SET_U, + .rst_clr_reg = RST_DEVICES_CLR_U, +}; + +static struct tegra_clk_periph_regs periph_v_regs = { + .enb_reg = CLK_OUT_ENB_V, + .enb_set_reg = CLK_OUT_ENB_SET_V, + .enb_clr_reg = CLK_OUT_ENB_CLR_V, + .rst_reg = RST_DEVICES_V, + .rst_set_reg = RST_DEVICES_SET_V, + .rst_clr_reg = RST_DEVICES_CLR_V, +}; + +static struct tegra_clk_periph_regs periph_w_regs = { + .enb_reg = CLK_OUT_ENB_W, + .enb_set_reg = CLK_OUT_ENB_SET_W, + .enb_clr_reg = CLK_OUT_ENB_CLR_W, + .rst_reg = RST_DEVICES_W, + .rst_set_reg = RST_DEVICES_SET_W, + .rst_clr_reg = RST_DEVICES_CLR_W, +}; + +/* possible OSC frequencies in Hz */ +static unsigned long tegra114_input_freq[] = { + [0] = 13000000, + [1] = 16800000, + [4] = 19200000, + [5] = 38400000, + [8] = 12000000, + [9] = 48000000, + [12] = 260000000, +}; + +#define MASK(x) (BIT(x) - 1) + +#define TEGRA_INIT_DATA_MUX(_name, _con_id, _dev_id, _parents, _offset, \ + _clk_num, _regs, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 30, MASK(2), 0, 0, 8, 1, 0, _regs, _clk_num, \ + periph_clk_enb_refcnt, _gate_flags, _clk_id, \ + _parents##_idx, 0) + +#define TEGRA_INIT_DATA_MUX_FLAGS(_name, _con_id, _dev_id, _parents, _offset,\ + _clk_num, _regs, _gate_flags, _clk_id, flags)\ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 30, MASK(2), 0, 0, 8, 1, 0, _regs, _clk_num, \ + periph_clk_enb_refcnt, _gate_flags, _clk_id, \ + _parents##_idx, flags) + +#define TEGRA_INIT_DATA_MUX8(_name, _con_id, _dev_id, _parents, _offset, \ + _clk_num, _regs, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 29, MASK(3), 0, 0, 8, 1, 0, _regs, _clk_num, \ + periph_clk_enb_refcnt, _gate_flags, _clk_id, \ + _parents##_idx, 0) + +#define TEGRA_INIT_DATA_INT(_name, _con_id, _dev_id, _parents, _offset, \ + _clk_num, _regs, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\ + _clk_num, periph_clk_enb_refcnt, _gate_flags, \ + _clk_id, _parents##_idx, 0) + +#define TEGRA_INIT_DATA_INT_FLAGS(_name, _con_id, _dev_id, _parents, _offset,\ + _clk_num, _regs, _gate_flags, _clk_id, flags)\ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\ + _clk_num, periph_clk_enb_refcnt, _gate_flags, \ + _clk_id, _parents##_idx, flags) + +#define TEGRA_INIT_DATA_INT8(_name, _con_id, _dev_id, _parents, _offset,\ + _clk_num, _regs, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\ + _clk_num, periph_clk_enb_refcnt, _gate_flags, \ + _clk_id, _parents##_idx, 0) + +#define TEGRA_INIT_DATA_UART(_name, _con_id, _dev_id, _parents, _offset,\ + _clk_num, _regs, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 30, MASK(2), 0, 0, 16, 1, TEGRA_DIVIDER_UART, _regs,\ + _clk_num, periph_clk_enb_refcnt, 0, _clk_id, \ + _parents##_idx, 0) + +#define TEGRA_INIT_DATA_I2C(_name, _con_id, _dev_id, _parents, _offset,\ + _clk_num, _regs, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + 30, MASK(2), 0, 0, 16, 0, 0, _regs, _clk_num, \ + periph_clk_enb_refcnt, 0, _clk_id, _parents##_idx, 0) + +#define TEGRA_INIT_DATA_NODIV(_name, _con_id, _dev_id, _parents, _offset, \ + _mux_shift, _mux_mask, _clk_num, _regs, \ + _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\ + _mux_shift, _mux_mask, 0, 0, 0, 0, 0, _regs, \ + _clk_num, periph_clk_enb_refcnt, _gate_flags, \ + _clk_id, _parents##_idx, 0) + +#define TEGRA_INIT_DATA_XUSB(_name, _con_id, _dev_id, _parents, _offset, \ + _clk_num, _regs, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset, \ + 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs, \ + _clk_num, periph_clk_enb_refcnt, _gate_flags, \ + _clk_id, _parents##_idx, 0) + +#define TEGRA_INIT_DATA_AUDIO(_name, _con_id, _dev_id, _offset, _clk_num,\ + _regs, _gate_flags, _clk_id) \ + TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, mux_d_audio_clk, \ + _offset, 16, 0xE01F, 0, 0, 8, 1, 0, _regs, _clk_num, \ + periph_clk_enb_refcnt, _gate_flags , _clk_id, \ + mux_d_audio_clk_idx, 0) + +enum tegra114_clk { + rtc = 4, timer = 5, uarta = 6, sdmmc2 = 9, i2s1 = 11, i2c1 = 12, + ndflash = 13, sdmmc1 = 14, sdmmc4 = 15, pwm = 17, i2s2 = 18, epp = 19, + gr_2d = 21, usbd = 22, isp = 23, gr_3d = 24, disp2 = 26, disp1 = 27, + host1x = 28, vcp = 29, i2s0 = 30, apbdma = 34, kbc = 36, kfuse = 40, + sbc1 = 41, nor = 42, sbc2 = 44, sbc3 = 46, i2c5 = 47, dsia = 48, + mipi = 50, hdmi = 51, csi = 52, i2c2 = 54, uartc = 55, mipi_cal = 56, + emc, usb2, usb3, vde = 61, bsea = 62, bsev = 63, uartd = 65, + i2c3 = 67, sbc4 = 68, sdmmc3 = 69, owr = 71, csite = 73, + la = 76, trace = 77, soc_therm = 78, dtv = 79, ndspeed = 80, + i2cslow = 81, dsib = 82, tsec = 83, xusb_host = 89, msenc = 91, + csus = 92, mselect = 99, tsensor = 100, i2s3 = 101, i2s4 = 102, + i2c4 = 103, sbc5 = 104, sbc6 = 105, d_audio, apbif = 107, dam0, dam1, + dam2, hda2codec_2x = 111, audio0_2x = 113, audio1_2x, audio2_2x, + audio3_2x, audio4_2x, spdif_2x, actmon = 119, extern1 = 120, + extern2 = 121, extern3 = 122, hda = 125, se = 127, hda2hdmi = 128, + cilab = 144, cilcd = 145, cile = 146, dsialp = 147, dsiblp = 148, + dds = 150, dp2 = 152, amx = 153, adx = 154, xusb_ss = 156, uartb = 192, + vfir, spdif_in, spdif_out, vi, vi_sensor, fuse, fuse_burn, clk_32k, + clk_m, clk_m_div2, clk_m_div4, pll_ref, pll_c, pll_c_out1, pll_c2, + pll_c3, pll_m, pll_m_out1, pll_p, pll_p_out1, pll_p_out2, pll_p_out3, + pll_p_out4, pll_a, pll_a_out0, pll_d, pll_d_out0, pll_d2, pll_d2_out0, + pll_u, pll_u_480M, pll_u_60M, pll_u_48M, pll_u_12M, pll_x, pll_x_out0, + pll_re_vco, pll_re_out, pll_e_out0, spdif_in_sync, i2s0_sync, + i2s1_sync, i2s2_sync, i2s3_sync, i2s4_sync, vimclk_sync, audio0, + audio1, audio2, audio3, audio4, spdif, clk_out_1, clk_out_2, clk_out_3, + blink, xusb_host_src = 252, xusb_falcon_src, xusb_fs_src, xusb_ss_src, + xusb_dev_src, xusb_dev, xusb_hs_src, sclk, hclk, pclk, cclk_g, cclk_lp, + + /* Mux clocks */ + + audio0_mux = 300, audio1_mux, audio2_mux, audio3_mux, audio4_mux, + spdif_mux, clk_out_1_mux, clk_out_2_mux, clk_out_3_mux, dsia_mux, + dsib_mux, clk_max, +}; + +struct utmi_clk_param { + /* Oscillator Frequency in KHz */ + u32 osc_frequency; + /* UTMIP PLL Enable Delay Count */ + u8 enable_delay_count; + /* UTMIP PLL Stable count */ + u8 stable_count; + /* UTMIP PLL Active delay count */ + u8 active_delay_count; + /* UTMIP PLL Xtal frequency count */ + u8 xtal_freq_count; +}; + +static const struct utmi_clk_param utmi_parameters[] = { + {.osc_frequency = 13000000, .enable_delay_count = 0x02, + .stable_count = 0x33, .active_delay_count = 0x05, + .xtal_freq_count = 0x7F}, + {.osc_frequency = 19200000, .enable_delay_count = 0x03, + .stable_count = 0x4B, .active_delay_count = 0x06, + .xtal_freq_count = 0xBB}, + {.osc_frequency = 12000000, .enable_delay_count = 0x02, + .stable_count = 0x2F, .active_delay_count = 0x04, + .xtal_freq_count = 0x76}, + {.osc_frequency = 26000000, .enable_delay_count = 0x04, + .stable_count = 0x66, .active_delay_count = 0x09, + .xtal_freq_count = 0xFE}, + {.osc_frequency = 16800000, .enable_delay_count = 0x03, + .stable_count = 0x41, .active_delay_count = 0x0A, + .xtal_freq_count = 0xA4}, +}; + +/* peripheral mux definitions */ + +#define MUX_I2S_SPDIF(_id) \ +static const char *mux_pllaout0_##_id##_2x_pllp_clkm[] = { "pll_a_out0", \ + #_id, "pll_p",\ + "clk_m"}; +MUX_I2S_SPDIF(audio0) +MUX_I2S_SPDIF(audio1) +MUX_I2S_SPDIF(audio2) +MUX_I2S_SPDIF(audio3) +MUX_I2S_SPDIF(audio4) +MUX_I2S_SPDIF(audio) + +#define mux_pllaout0_audio0_2x_pllp_clkm_idx NULL +#define mux_pllaout0_audio1_2x_pllp_clkm_idx NULL +#define mux_pllaout0_audio2_2x_pllp_clkm_idx NULL +#define mux_pllaout0_audio3_2x_pllp_clkm_idx NULL +#define mux_pllaout0_audio4_2x_pllp_clkm_idx NULL +#define mux_pllaout0_audio_2x_pllp_clkm_idx NULL + +static const char *mux_pllp_pllc_pllm_clkm[] = { + "pll_p", "pll_c", "pll_m", "clk_m" +}; +#define mux_pllp_pllc_pllm_clkm_idx NULL + +static const char *mux_pllp_pllc_pllm[] = { "pll_p", "pll_c", "pll_m" }; +#define mux_pllp_pllc_pllm_idx NULL + +static const char *mux_pllp_pllc_clk32_clkm[] = { + "pll_p", "pll_c", "clk_32k", "clk_m" +}; +#define mux_pllp_pllc_clk32_clkm_idx NULL + +static const char *mux_plla_pllc_pllp_clkm[] = { + "pll_a_out0", "pll_c", "pll_p", "clk_m" +}; +#define mux_plla_pllc_pllp_clkm_idx mux_pllp_pllc_pllm_clkm_idx + +static const char *mux_pllp_pllc2_c_c3_pllm_clkm[] = { + "pll_p", "pll_c2", "pll_c", "pll_c3", "pll_m", "clk_m" +}; +static u32 mux_pllp_pllc2_c_c3_pllm_clkm_idx[] = { + [0] = 0, [1] = 1, [2] = 2, [3] = 3, [4] = 4, [5] = 6, +}; + +static const char *mux_pllp_clkm[] = { + "pll_p", "clk_m" +}; +static u32 mux_pllp_clkm_idx[] = { + [0] = 0, [1] = 3, +}; + +static const char *mux_pllm_pllc2_c_c3_pllp_plla[] = { + "pll_m", "pll_c2", "pll_c", "pll_c3", "pll_p", "pll_a_out0" +}; +#define mux_pllm_pllc2_c_c3_pllp_plla_idx mux_pllp_pllc2_c_c3_pllm_clkm_idx + +static const char *mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = { + "pll_p", "pll_m", "pll_d_out0", "pll_a_out0", "pll_c", + "pll_d2_out0", "clk_m" +}; +#define mux_pllp_pllm_plld_plla_pllc_plld2_clkm_idx NULL + +static const char *mux_pllm_pllc_pllp_plla[] = { + "pll_m", "pll_c", "pll_p", "pll_a_out0" +}; +#define mux_pllm_pllc_pllp_plla_idx mux_pllp_pllc_pllm_clkm_idx + +static const char *mux_pllp_pllc_clkm[] = { + "pll_p", "pll_c", "pll_m" +}; +static u32 mux_pllp_pllc_clkm_idx[] = { + [0] = 0, [1] = 1, [2] = 3, +}; + +static const char *mux_pllp_pllc_clkm_clk32[] = { + "pll_p", "pll_c", "clk_m", "clk_32k" +}; +#define mux_pllp_pllc_clkm_clk32_idx NULL + +static const char *mux_plla_clk32_pllp_clkm_plle[] = { + "pll_a_out0", "clk_32k", "pll_p", "clk_m", "pll_e_out0" +}; +#define mux_plla_clk32_pllp_clkm_plle_idx NULL + +static const char *mux_clkm_pllp_pllc_pllre[] = { + "clk_m", "pll_p", "pll_c", "pll_re_out" +}; +static u32 mux_clkm_pllp_pllc_pllre_idx[] = { + [0] = 0, [1] = 1, [2] = 3, [3] = 5, +}; + +static const char *mux_clkm_48M_pllp_480M[] = { + "clk_m", "pll_u_48M", "pll_p", "pll_u_480M" +}; +#define mux_clkm_48M_pllp_480M_idx NULL + +static const char *mux_clkm_pllre_clk32_480M_pllc_ref[] = { + "clk_m", "pll_re_out", "clk_32k", "pll_u_480M", "pll_c", "pll_ref" +}; +static u32 mux_clkm_pllre_clk32_480M_pllc_ref_idx[] = { + [0] = 0, [1] = 1, [2] = 3, [3] = 3, [4] = 4, [5] = 7, +}; + +static const char *mux_plld_out0_plld2_out0[] = { + "pll_d_out0", "pll_d2_out0", +}; +#define mux_plld_out0_plld2_out0_idx NULL + +static const char *mux_d_audio_clk[] = { + "pll_a_out0", "pll_p", "clk_m", "spdif_in_sync", "i2s0_sync", + "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync", +}; +static u32 mux_d_audio_clk_idx[] = { + [0] = 0, [1] = 0x8000, [2] = 0xc000, [3] = 0xE000, [4] = 0xE001, + [5] = 0xE002, [6] = 0xE003, [7] = 0xE004, [8] = 0xE005, [9] = 0xE007, +}; + +static const char *mux_pllmcp_clkm[] = { + "pll_m_out0", "pll_c_out0", "pll_p_out0", "clk_m", "pll_m_ud", +}; + +static const struct clk_div_table pll_re_div_table[] = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 3 }, + { .val = 3, .div = 4 }, + { .val = 4, .div = 5 }, + { .val = 5, .div = 6 }, + { .val = 0, .div = 0 }, +}; + +static struct clk *clks[clk_max]; +static struct clk_onecell_data clk_data; + +static unsigned long osc_freq; +static unsigned long pll_ref_freq; + +static int __init tegra114_osc_clk_init(void __iomem *clk_base) +{ + struct clk *clk; + u32 val, pll_ref_div; + + val = readl_relaxed(clk_base + OSC_CTRL); + + osc_freq = tegra114_input_freq[val >> OSC_CTRL_OSC_FREQ_SHIFT]; + if (!osc_freq) { + WARN_ON(1); + return -EINVAL; + } + + /* clk_m */ + clk = clk_register_fixed_rate(NULL, "clk_m", NULL, CLK_IS_ROOT, + osc_freq); + clk_register_clkdev(clk, "clk_m", NULL); + clks[clk_m] = clk; + + /* pll_ref */ + val = (val >> OSC_CTRL_PLL_REF_DIV_SHIFT) & 3; + pll_ref_div = 1 << val; + clk = clk_register_fixed_factor(NULL, "pll_ref", "clk_m", + CLK_SET_RATE_PARENT, 1, pll_ref_div); + clk_register_clkdev(clk, "pll_ref", NULL); + clks[pll_ref] = clk; + + pll_ref_freq = osc_freq / pll_ref_div; + + return 0; +} + +static void __init tegra114_fixed_clk_init(void __iomem *clk_base) +{ + struct clk *clk; + + /* clk_32k */ + clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, CLK_IS_ROOT, + 32768); + clk_register_clkdev(clk, "clk_32k", NULL); + clks[clk_32k] = clk; + + /* clk_m_div2 */ + clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "clk_m_div2", NULL); + clks[clk_m_div2] = clk; + + /* clk_m_div4 */ + clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m", + CLK_SET_RATE_PARENT, 1, 4); + clk_register_clkdev(clk, "clk_m_div4", NULL); + clks[clk_m_div4] = clk; + +} + +static __init void tegra114_utmi_param_configure(void __iomem *clk_base) +{ + u32 reg; + int i; + + for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { + if (osc_freq == utmi_parameters[i].osc_frequency) + break; + } + + if (i >= ARRAY_SIZE(utmi_parameters)) { + pr_err("%s: Unexpected oscillator freq %lu\n", __func__, + osc_freq); + return; + } + + reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); + + /* Program UTMIP PLL stable and active counts */ + /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */ + reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); + reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count); + + reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); + + reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i]. + active_delay_count); + + /* Remove power downs from UTMIP PLL control bits */ + reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; + reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; + reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN; + + writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); + + /* Program UTMIP PLL delay and oscillator frequency counts */ + reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); + reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); + + reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i]. + enable_delay_count); + + reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); + reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i]. + xtal_freq_count); + + /* Remove power downs from UTMIP PLL control bits */ + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; + writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); + + /* Setup HW control of UTMIPLL */ + reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); + reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET; + reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL; + reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE; + writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); + + reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; + reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; + writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); + + udelay(1); + + /* Setup SW override of UTMIPLL assuming USB2.0 + ports are assigned to USB2 */ + reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); + reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL; + reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE; + writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); + + udelay(1); + + /* Enable HW control UTMIPLL */ + reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); + reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE; + writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); +} + +static void __init _clip_vco_min(struct tegra_clk_pll_params *pll_params) +{ + pll_params->vco_min = + DIV_ROUND_UP(pll_params->vco_min, pll_ref_freq) * pll_ref_freq; +} + +static int __init _setup_dynamic_ramp(struct tegra_clk_pll_params *pll_params, + void __iomem *clk_base) +{ + u32 val; + u32 step_a, step_b; + + switch (pll_ref_freq) { + case 12000000: + case 13000000: + case 26000000: + step_a = 0x2B; + step_b = 0x0B; + break; + case 16800000: + step_a = 0x1A; + step_b = 0x09; + break; + case 19200000: + step_a = 0x12; + step_b = 0x08; + break; + default: + pr_err("%s: Unexpected reference rate %lu\n", + __func__, pll_ref_freq); + WARN_ON(1); + return -EINVAL; + } + + val = step_a << pll_params->stepa_shift; + val |= step_b << pll_params->stepb_shift; + writel_relaxed(val, clk_base + pll_params->dyn_ramp_reg); + + return 0; +} + +static void __init _init_iddq(struct tegra_clk_pll_params *pll_params, + void __iomem *clk_base) +{ + u32 val, val_iddq; + + val = readl_relaxed(clk_base + pll_params->base_reg); + val_iddq = readl_relaxed(clk_base + pll_params->iddq_reg); + + if (val & BIT(30)) + WARN_ON(val_iddq & BIT(pll_params->iddq_bit_idx)); + else { + val_iddq |= BIT(pll_params->iddq_bit_idx); + writel_relaxed(val_iddq, clk_base + pll_params->iddq_reg); + } +} + +static void __init tegra114_pll_init(void __iomem *clk_base, + void __iomem *pmc) +{ + u32 val; + struct clk *clk; + + /* PLLC */ + _clip_vco_min(&pll_c_params); + if (_setup_dynamic_ramp(&pll_c_params, clk_base) >= 0) { + _init_iddq(&pll_c_params, clk_base); + clk = tegra_clk_register_pllxc("pll_c", "pll_ref", clk_base, + pmc, 0, 0, &pll_c_params, TEGRA_PLL_USE_LOCK, + pll_c_freq_table, NULL); + clk_register_clkdev(clk, "pll_c", NULL); + clks[pll_c] = clk; + + /* PLLC_OUT1 */ + clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c", + clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP, + 8, 8, 1, NULL); + clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div", + clk_base + PLLC_OUT, 1, 0, + CLK_SET_RATE_PARENT, 0, NULL); + clk_register_clkdev(clk, "pll_c_out1", NULL); + clks[pll_c_out1] = clk; + } + + /* PLLC2 */ + _clip_vco_min(&pll_c2_params); + clk = tegra_clk_register_pllc("pll_c2", "pll_ref", clk_base, pmc, 0, 0, + &pll_c2_params, TEGRA_PLL_USE_LOCK, + pll_cx_freq_table, NULL); + clk_register_clkdev(clk, "pll_c2", NULL); + clks[pll_c2] = clk; + + /* PLLC3 */ + _clip_vco_min(&pll_c3_params); + clk = tegra_clk_register_pllc("pll_c3", "pll_ref", clk_base, pmc, 0, 0, + &pll_c3_params, TEGRA_PLL_USE_LOCK, + pll_cx_freq_table, NULL); + clk_register_clkdev(clk, "pll_c3", NULL); + clks[pll_c3] = clk; + + /* PLLP */ + clk = tegra_clk_register_pll("pll_p", "pll_ref", clk_base, pmc, 0, + 408000000, &pll_p_params, + TEGRA_PLL_FIXED | TEGRA_PLL_USE_LOCK, + pll_p_freq_table, NULL); + clk_register_clkdev(clk, "pll_p", NULL); + clks[pll_p] = clk; + + /* PLLP_OUT1 */ + clk = tegra_clk_register_divider("pll_p_out1_div", "pll_p", + clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED | + TEGRA_DIVIDER_ROUND_UP, 8, 8, 1, &pll_div_lock); + clk = tegra_clk_register_pll_out("pll_p_out1", "pll_p_out1_div", + clk_base + PLLP_OUTA, 1, 0, + CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0, + &pll_div_lock); + clk_register_clkdev(clk, "pll_p_out1", NULL); + clks[pll_p_out1] = clk; + + /* PLLP_OUT2 */ + clk = tegra_clk_register_divider("pll_p_out2_div", "pll_p", + clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED | + TEGRA_DIVIDER_ROUND_UP, 24, 8, 1, + &pll_div_lock); + clk = tegra_clk_register_pll_out("pll_p_out2", "pll_p_out2_div", + clk_base + PLLP_OUTA, 17, 16, + CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0, + &pll_div_lock); + clk_register_clkdev(clk, "pll_p_out2", NULL); + clks[pll_p_out2] = clk; + + /* PLLP_OUT3 */ + clk = tegra_clk_register_divider("pll_p_out3_div", "pll_p", + clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED | + TEGRA_DIVIDER_ROUND_UP, 8, 8, 1, &pll_div_lock); + clk = tegra_clk_register_pll_out("pll_p_out3", "pll_p_out3_div", + clk_base + PLLP_OUTB, 1, 0, + CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0, + &pll_div_lock); + clk_register_clkdev(clk, "pll_p_out3", NULL); + clks[pll_p_out3] = clk; + + /* PLLP_OUT4 */ + clk = tegra_clk_register_divider("pll_p_out4_div", "pll_p", + clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED | + TEGRA_DIVIDER_ROUND_UP, 24, 8, 1, + &pll_div_lock); + clk = tegra_clk_register_pll_out("pll_p_out4", "pll_p_out4_div", + clk_base + PLLP_OUTB, 17, 16, + CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0, + &pll_div_lock); + clk_register_clkdev(clk, "pll_p_out4", NULL); + clks[pll_p_out4] = clk; + + /* PLLM */ + _clip_vco_min(&pll_m_params); + clk = tegra_clk_register_pllm("pll_m", "pll_ref", clk_base, pmc, + CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE, 0, + &pll_m_params, TEGRA_PLL_USE_LOCK, + pll_m_freq_table, NULL); + clk_register_clkdev(clk, "pll_m", NULL); + clks[pll_m] = clk; + + /* PLLM_OUT1 */ + clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m", + clk_base + PLLM_OUT, 0, TEGRA_DIVIDER_ROUND_UP, + 8, 8, 1, NULL); + clk = tegra_clk_register_pll_out("pll_m_out1", "pll_m_out1_div", + clk_base + PLLM_OUT, 1, 0, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0, NULL); + clk_register_clkdev(clk, "pll_m_out1", NULL); + clks[pll_m_out1] = clk; + + /* PLLM_UD */ + clk = clk_register_fixed_factor(NULL, "pll_m_ud", "pll_m", + CLK_SET_RATE_PARENT, 1, 1); + + /* PLLX */ + _clip_vco_min(&pll_x_params); + if (_setup_dynamic_ramp(&pll_x_params, clk_base) >= 0) { + _init_iddq(&pll_x_params, clk_base); + clk = tegra_clk_register_pllxc("pll_x", "pll_ref", clk_base, + pmc, CLK_IGNORE_UNUSED, 0, &pll_x_params, + TEGRA_PLL_USE_LOCK, pll_x_freq_table, NULL); + clk_register_clkdev(clk, "pll_x", NULL); + clks[pll_x] = clk; + } + + /* PLLX_OUT0 */ + clk = clk_register_fixed_factor(NULL, "pll_x_out0", "pll_x", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll_x_out0", NULL); + clks[pll_x_out0] = clk; + + /* PLLU */ + val = readl(clk_base + pll_u_params.base_reg); + val &= ~BIT(24); /* disable PLLU_OVERRIDE */ + writel(val, clk_base + pll_u_params.base_reg); + + clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0, + 0, &pll_u_params, TEGRA_PLLU | + TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON | + TEGRA_PLL_USE_LOCK, pll_u_freq_table, &pll_u_lock); + clk_register_clkdev(clk, "pll_u", NULL); + clks[pll_u] = clk; + + tegra114_utmi_param_configure(clk_base); + + /* PLLU_480M */ + clk = clk_register_gate(NULL, "pll_u_480M", "pll_u", + CLK_SET_RATE_PARENT, clk_base + PLLU_BASE, + 22, 0, &pll_u_lock); + clk_register_clkdev(clk, "pll_u_480M", NULL); + clks[pll_u_480M] = clk; + + /* PLLU_60M */ + clk = clk_register_fixed_factor(NULL, "pll_u_60M", "pll_u", + CLK_SET_RATE_PARENT, 1, 8); + clk_register_clkdev(clk, "pll_u_60M", NULL); + clks[pll_u_60M] = clk; + + /* PLLU_48M */ + clk = clk_register_fixed_factor(NULL, "pll_u_48M", "pll_u", + CLK_SET_RATE_PARENT, 1, 10); + clk_register_clkdev(clk, "pll_u_48M", NULL); + clks[pll_u_48M] = clk; + + /* PLLU_12M */ + clk = clk_register_fixed_factor(NULL, "pll_u_12M", "pll_u", + CLK_SET_RATE_PARENT, 1, 40); + clk_register_clkdev(clk, "pll_u_12M", NULL); + clks[pll_u_12M] = clk; + + /* PLLD */ + clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc, 0, + 0, &pll_d_params, + TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON | + TEGRA_PLL_USE_LOCK, pll_d_freq_table, &pll_d_lock); + clk_register_clkdev(clk, "pll_d", NULL); + clks[pll_d] = clk; + + /* PLLD_OUT0 */ + clk = clk_register_fixed_factor(NULL, "pll_d_out0", "pll_d", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll_d_out0", NULL); + clks[pll_d_out0] = clk; + + /* PLLD2 */ + clk = tegra_clk_register_pll("pll_d2", "pll_ref", clk_base, pmc, 0, + 0, &pll_d2_params, + TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON | + TEGRA_PLL_USE_LOCK, pll_d_freq_table, &pll_d2_lock); + clk_register_clkdev(clk, "pll_d2", NULL); + clks[pll_d2] = clk; + + /* PLLD2_OUT0 */ + clk = clk_register_fixed_factor(NULL, "pll_d2_out0", "pll_d2", + CLK_SET_RATE_PARENT, 1, 2); + clk_register_clkdev(clk, "pll_d2_out0", NULL); + clks[pll_d2_out0] = clk; + + /* PLLA */ + clk = tegra_clk_register_pll("pll_a", "pll_p_out1", clk_base, pmc, 0, + 0, &pll_a_params, TEGRA_PLL_HAS_CPCON | + TEGRA_PLL_USE_LOCK, pll_a_freq_table, NULL); + clk_register_clkdev(clk, "pll_a", NULL); + clks[pll_a] = clk; + + /* PLLA_OUT0 */ + clk = tegra_clk_register_divider("pll_a_out0_div", "pll_a", + clk_base + PLLA_OUT, 0, TEGRA_DIVIDER_ROUND_UP, + 8, 8, 1, NULL); + clk = tegra_clk_register_pll_out("pll_a_out0", "pll_a_out0_div", + clk_base + PLLA_OUT, 1, 0, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0, NULL); + clk_register_clkdev(clk, "pll_a_out0", NULL); + clks[pll_a_out0] = clk; + + /* PLLRE */ + _clip_vco_min(&pll_re_vco_params); + clk = tegra_clk_register_pllre("pll_re_vco", "pll_ref", clk_base, pmc, + 0, 0, &pll_re_vco_params, TEGRA_PLL_USE_LOCK, + NULL, &pll_re_lock, pll_ref_freq); + clk_register_clkdev(clk, "pll_re_vco", NULL); + clks[pll_re_vco] = clk; + + clk = clk_register_divider_table(NULL, "pll_re_out", "pll_re_vco", 0, + clk_base + PLLRE_BASE, 16, 4, 0, + pll_re_div_table, &pll_re_lock); + clk_register_clkdev(clk, "pll_re_out", NULL); + clks[pll_re_out] = clk; + + /* PLLE */ + clk = tegra_clk_register_plle_tegra114("pll_e_out0", "pll_re_vco", + clk_base, 0, 100000000, &pll_e_params, + pll_e_freq_table, NULL); + clk_register_clkdev(clk, "pll_e_out0", NULL); + clks[pll_e_out0] = clk; +} + +static const char *mux_audio_sync_clk[] = { "spdif_in_sync", "i2s0_sync", + "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync", +}; + +static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2", + "clk_m_div4", "extern1", +}; + +static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2", + "clk_m_div4", "extern2", +}; + +static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2", + "clk_m_div4", "extern3", +}; + +static void __init tegra114_audio_clk_init(void __iomem *clk_base) +{ + struct clk *clk; + + /* spdif_in_sync */ + clk = tegra_clk_register_sync_source("spdif_in_sync", 24000000, + 24000000); + clk_register_clkdev(clk, "spdif_in_sync", NULL); + clks[spdif_in_sync] = clk; + + /* i2s0_sync */ + clk = tegra_clk_register_sync_source("i2s0_sync", 24000000, 24000000); + clk_register_clkdev(clk, "i2s0_sync", NULL); + clks[i2s0_sync] = clk; + + /* i2s1_sync */ + clk = tegra_clk_register_sync_source("i2s1_sync", 24000000, 24000000); + clk_register_clkdev(clk, "i2s1_sync", NULL); + clks[i2s1_sync] = clk; + + /* i2s2_sync */ + clk = tegra_clk_register_sync_source("i2s2_sync", 24000000, 24000000); + clk_register_clkdev(clk, "i2s2_sync", NULL); + clks[i2s2_sync] = clk; + + /* i2s3_sync */ + clk = tegra_clk_register_sync_source("i2s3_sync", 24000000, 24000000); + clk_register_clkdev(clk, "i2s3_sync", NULL); + clks[i2s3_sync] = clk; + + /* i2s4_sync */ + clk = tegra_clk_register_sync_source("i2s4_sync", 24000000, 24000000); + clk_register_clkdev(clk, "i2s4_sync", NULL); + clks[i2s4_sync] = clk; + + /* vimclk_sync */ + clk = tegra_clk_register_sync_source("vimclk_sync", 24000000, 24000000); + clk_register_clkdev(clk, "vimclk_sync", NULL); + clks[vimclk_sync] = clk; + + /* audio0 */ + clk = clk_register_mux(NULL, "audio0_mux", mux_audio_sync_clk, + ARRAY_SIZE(mux_audio_sync_clk), 0, + clk_base + AUDIO_SYNC_CLK_I2S0, 0, 3, 0, + NULL); + clks[audio0_mux] = clk; + clk = clk_register_gate(NULL, "audio0", "audio0_mux", 0, + clk_base + AUDIO_SYNC_CLK_I2S0, 4, + CLK_GATE_SET_TO_DISABLE, NULL); + clk_register_clkdev(clk, "audio0", NULL); + clks[audio0] = clk; + + /* audio1 */ + clk = clk_register_mux(NULL, "audio1_mux", mux_audio_sync_clk, + ARRAY_SIZE(mux_audio_sync_clk), 0, + clk_base + AUDIO_SYNC_CLK_I2S1, 0, 3, 0, + NULL); + clks[audio1_mux] = clk; + clk = clk_register_gate(NULL, "audio1", "audio1_mux", 0, + clk_base + AUDIO_SYNC_CLK_I2S1, 4, + CLK_GATE_SET_TO_DISABLE, NULL); + clk_register_clkdev(clk, "audio1", NULL); + clks[audio1] = clk; + + /* audio2 */ + clk = clk_register_mux(NULL, "audio2_mux", mux_audio_sync_clk, + ARRAY_SIZE(mux_audio_sync_clk), 0, + clk_base + AUDIO_SYNC_CLK_I2S2, 0, 3, 0, + NULL); + clks[audio2_mux] = clk; + clk = clk_register_gate(NULL, "audio2", "audio2_mux", 0, + clk_base + AUDIO_SYNC_CLK_I2S2, 4, + CLK_GATE_SET_TO_DISABLE, NULL); + clk_register_clkdev(clk, "audio2", NULL); + clks[audio2] = clk; + + /* audio3 */ + clk = clk_register_mux(NULL, "audio3_mux", mux_audio_sync_clk, + ARRAY_SIZE(mux_audio_sync_clk), 0, + clk_base + AUDIO_SYNC_CLK_I2S3, 0, 3, 0, + NULL); + clks[audio3_mux] = clk; + clk = clk_register_gate(NULL, "audio3", "audio3_mux", 0, + clk_base + AUDIO_SYNC_CLK_I2S3, 4, + CLK_GATE_SET_TO_DISABLE, NULL); + clk_register_clkdev(clk, "audio3", NULL); + clks[audio3] = clk; + + /* audio4 */ + clk = clk_register_mux(NULL, "audio4_mux", mux_audio_sync_clk, + ARRAY_SIZE(mux_audio_sync_clk), 0, + clk_base + AUDIO_SYNC_CLK_I2S4, 0, 3, 0, + NULL); + clks[audio4_mux] = clk; + clk = clk_register_gate(NULL, "audio4", "audio4_mux", 0, + clk_base + AUDIO_SYNC_CLK_I2S4, 4, + CLK_GATE_SET_TO_DISABLE, NULL); + clk_register_clkdev(clk, "audio4", NULL); + clks[audio4] = clk; + + /* spdif */ + clk = clk_register_mux(NULL, "spdif_mux", mux_audio_sync_clk, + ARRAY_SIZE(mux_audio_sync_clk), 0, + clk_base + AUDIO_SYNC_CLK_SPDIF, 0, 3, 0, + NULL); + clks[spdif_mux] = clk; + clk = clk_register_gate(NULL, "spdif", "spdif_mux", 0, + clk_base + AUDIO_SYNC_CLK_SPDIF, 4, + CLK_GATE_SET_TO_DISABLE, NULL); + clk_register_clkdev(clk, "spdif", NULL); + clks[spdif] = clk; + + /* audio0_2x */ + clk = clk_register_fixed_factor(NULL, "audio0_doubler", "audio0", + CLK_SET_RATE_PARENT, 2, 1); + clk = tegra_clk_register_divider("audio0_div", "audio0_doubler", + clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 24, 1, + 0, &clk_doubler_lock); + clk = tegra_clk_register_periph_gate("audio0_2x", "audio0_div", + TEGRA_PERIPH_NO_RESET, clk_base, + CLK_SET_RATE_PARENT, 113, &periph_v_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, "audio0_2x", NULL); + clks[audio0_2x] = clk; + + /* audio1_2x */ + clk = clk_register_fixed_factor(NULL, "audio1_doubler", "audio1", + CLK_SET_RATE_PARENT, 2, 1); + clk = tegra_clk_register_divider("audio1_div", "audio1_doubler", + clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 25, 1, + 0, &clk_doubler_lock); + clk = tegra_clk_register_periph_gate("audio1_2x", "audio1_div", + TEGRA_PERIPH_NO_RESET, clk_base, + CLK_SET_RATE_PARENT, 114, &periph_v_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, "audio1_2x", NULL); + clks[audio1_2x] = clk; + + /* audio2_2x */ + clk = clk_register_fixed_factor(NULL, "audio2_doubler", "audio2", + CLK_SET_RATE_PARENT, 2, 1); + clk = tegra_clk_register_divider("audio2_div", "audio2_doubler", + clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 26, 1, + 0, &clk_doubler_lock); + clk = tegra_clk_register_periph_gate("audio2_2x", "audio2_div", + TEGRA_PERIPH_NO_RESET, clk_base, + CLK_SET_RATE_PARENT, 115, &periph_v_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, "audio2_2x", NULL); + clks[audio2_2x] = clk; + + /* audio3_2x */ + clk = clk_register_fixed_factor(NULL, "audio3_doubler", "audio3", + CLK_SET_RATE_PARENT, 2, 1); + clk = tegra_clk_register_divider("audio3_div", "audio3_doubler", + clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 27, 1, + 0, &clk_doubler_lock); + clk = tegra_clk_register_periph_gate("audio3_2x", "audio3_div", + TEGRA_PERIPH_NO_RESET, clk_base, + CLK_SET_RATE_PARENT, 116, &periph_v_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, "audio3_2x", NULL); + clks[audio3_2x] = clk; + + /* audio4_2x */ + clk = clk_register_fixed_factor(NULL, "audio4_doubler", "audio4", + CLK_SET_RATE_PARENT, 2, 1); + clk = tegra_clk_register_divider("audio4_div", "audio4_doubler", + clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 28, 1, + 0, &clk_doubler_lock); + clk = tegra_clk_register_periph_gate("audio4_2x", "audio4_div", + TEGRA_PERIPH_NO_RESET, clk_base, + CLK_SET_RATE_PARENT, 117, &periph_v_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, "audio4_2x", NULL); + clks[audio4_2x] = clk; + + /* spdif_2x */ + clk = clk_register_fixed_factor(NULL, "spdif_doubler", "spdif", + CLK_SET_RATE_PARENT, 2, 1); + clk = tegra_clk_register_divider("spdif_div", "spdif_doubler", + clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 29, 1, + 0, &clk_doubler_lock); + clk = tegra_clk_register_periph_gate("spdif_2x", "spdif_div", + TEGRA_PERIPH_NO_RESET, clk_base, + CLK_SET_RATE_PARENT, 118, + &periph_v_regs, periph_clk_enb_refcnt); + clk_register_clkdev(clk, "spdif_2x", NULL); + clks[spdif_2x] = clk; +} + +static void __init tegra114_pmc_clk_init(void __iomem *pmc_base) +{ + struct clk *clk; + + /* clk_out_1 */ + clk = clk_register_mux(NULL, "clk_out_1_mux", clk_out1_parents, + ARRAY_SIZE(clk_out1_parents), 0, + pmc_base + PMC_CLK_OUT_CNTRL, 6, 3, 0, + &clk_out_lock); + clks[clk_out_1_mux] = clk; + clk = clk_register_gate(NULL, "clk_out_1", "clk_out_1_mux", 0, + pmc_base + PMC_CLK_OUT_CNTRL, 2, 0, + &clk_out_lock); + clk_register_clkdev(clk, "extern1", "clk_out_1"); + clks[clk_out_1] = clk; + + /* clk_out_2 */ + clk = clk_register_mux(NULL, "clk_out_2_mux", clk_out2_parents, + ARRAY_SIZE(clk_out1_parents), 0, + pmc_base + PMC_CLK_OUT_CNTRL, 14, 3, 0, + &clk_out_lock); + clks[clk_out_2_mux] = clk; + clk = clk_register_gate(NULL, "clk_out_2", "clk_out_2_mux", 0, + pmc_base + PMC_CLK_OUT_CNTRL, 10, 0, + &clk_out_lock); + clk_register_clkdev(clk, "extern2", "clk_out_2"); + clks[clk_out_2] = clk; + + /* clk_out_3 */ + clk = clk_register_mux(NULL, "clk_out_3_mux", clk_out3_parents, + ARRAY_SIZE(clk_out1_parents), 0, + pmc_base + PMC_CLK_OUT_CNTRL, 22, 3, 0, + &clk_out_lock); + clks[clk_out_3_mux] = clk; + clk = clk_register_gate(NULL, "clk_out_3", "clk_out_3_mux", 0, + pmc_base + PMC_CLK_OUT_CNTRL, 18, 0, + &clk_out_lock); + clk_register_clkdev(clk, "extern3", "clk_out_3"); + clks[clk_out_3] = clk; + + /* blink */ + clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0, + pmc_base + PMC_DPD_PADS_ORIDE, + PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL); + clk = clk_register_gate(NULL, "blink", "blink_override", 0, + pmc_base + PMC_CTRL, + PMC_CTRL_BLINK_ENB, 0, NULL); + clk_register_clkdev(clk, "blink", NULL); + clks[blink] = clk; + +} + +static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4", + "pll_p_out3", "pll_p_out2", "unused", + "clk_32k", "pll_m_out1" }; + +static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m", + "pll_p", "pll_p_out4", "unused", + "unused", "pll_x" }; + +static const char *cclk_lp_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m", + "pll_p", "pll_p_out4", "unused", + "unused", "pll_x", "pll_x_out0" }; + +static void __init tegra114_super_clk_init(void __iomem *clk_base) +{ + struct clk *clk; + + /* CCLKG */ + clk = tegra_clk_register_super_mux("cclk_g", cclk_g_parents, + ARRAY_SIZE(cclk_g_parents), + CLK_SET_RATE_PARENT, + clk_base + CCLKG_BURST_POLICY, + 0, 4, 0, 0, NULL); + clk_register_clkdev(clk, "cclk_g", NULL); + clks[cclk_g] = clk; + + /* CCLKLP */ + clk = tegra_clk_register_super_mux("cclk_lp", cclk_lp_parents, + ARRAY_SIZE(cclk_lp_parents), + CLK_SET_RATE_PARENT, + clk_base + CCLKLP_BURST_POLICY, + 0, 4, 8, 9, NULL); + clk_register_clkdev(clk, "cclk_lp", NULL); + clks[cclk_lp] = clk; + + /* SCLK */ + clk = tegra_clk_register_super_mux("sclk", sclk_parents, + ARRAY_SIZE(sclk_parents), + CLK_SET_RATE_PARENT, + clk_base + SCLK_BURST_POLICY, + 0, 4, 0, 0, NULL); + clk_register_clkdev(clk, "sclk", NULL); + clks[sclk] = clk; + + /* HCLK */ + clk = clk_register_divider(NULL, "hclk_div", "sclk", 0, + clk_base + SYSTEM_CLK_RATE, 4, 2, 0, + &sysrate_lock); + clk = clk_register_gate(NULL, "hclk", "hclk_div", CLK_SET_RATE_PARENT | + CLK_IGNORE_UNUSED, clk_base + SYSTEM_CLK_RATE, + 7, CLK_GATE_SET_TO_DISABLE, &sysrate_lock); + clk_register_clkdev(clk, "hclk", NULL); + clks[hclk] = clk; + + /* PCLK */ + clk = clk_register_divider(NULL, "pclk_div", "hclk", 0, + clk_base + SYSTEM_CLK_RATE, 0, 2, 0, + &sysrate_lock); + clk = clk_register_gate(NULL, "pclk", "pclk_div", CLK_SET_RATE_PARENT | + CLK_IGNORE_UNUSED, clk_base + SYSTEM_CLK_RATE, + 3, CLK_GATE_SET_TO_DISABLE, &sysrate_lock); + clk_register_clkdev(clk, "pclk", NULL); + clks[pclk] = clk; +} + +static struct tegra_periph_init_data tegra_periph_clk_list[] = { + TEGRA_INIT_DATA_MUX("i2s0", NULL, "tegra30-i2s.0", mux_pllaout0_audio0_2x_pllp_clkm, CLK_SOURCE_I2S0, 30, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s0), + TEGRA_INIT_DATA_MUX("i2s1", NULL, "tegra30-i2s.1", mux_pllaout0_audio1_2x_pllp_clkm, CLK_SOURCE_I2S1, 11, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s1), + TEGRA_INIT_DATA_MUX("i2s2", NULL, "tegra30-i2s.2", mux_pllaout0_audio2_2x_pllp_clkm, CLK_SOURCE_I2S2, 18, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s2), + TEGRA_INIT_DATA_MUX("i2s3", NULL, "tegra30-i2s.3", mux_pllaout0_audio3_2x_pllp_clkm, CLK_SOURCE_I2S3, 101, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s3), + TEGRA_INIT_DATA_MUX("i2s4", NULL, "tegra30-i2s.4", mux_pllaout0_audio4_2x_pllp_clkm, CLK_SOURCE_I2S4, 102, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s4), + TEGRA_INIT_DATA_MUX("spdif_out", "spdif_out", "tegra30-spdif", mux_pllaout0_audio_2x_pllp_clkm, CLK_SOURCE_SPDIF_OUT, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_out), + TEGRA_INIT_DATA_MUX("spdif_in", "spdif_in", "tegra30-spdif", mux_pllp_pllc_pllm, CLK_SOURCE_SPDIF_IN, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_in), + TEGRA_INIT_DATA_MUX("pwm", NULL, "pwm", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_PWM, 17, &periph_l_regs, TEGRA_PERIPH_ON_APB, pwm), + TEGRA_INIT_DATA_MUX("adx", NULL, "adx", mux_plla_pllc_pllp_clkm, CLK_SOURCE_ADX, 154, &periph_w_regs, TEGRA_PERIPH_ON_APB, adx), + TEGRA_INIT_DATA_MUX("amx", NULL, "amx", mux_plla_pllc_pllp_clkm, CLK_SOURCE_AMX, 153, &periph_w_regs, TEGRA_PERIPH_ON_APB, amx), + TEGRA_INIT_DATA_MUX("hda", "hda", "tegra30-hda", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_HDA, 125, &periph_v_regs, TEGRA_PERIPH_ON_APB, hda), + TEGRA_INIT_DATA_MUX("hda2codec_2x", "hda2codec", "tegra30-hda", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_HDA2CODEC_2X, 111, &periph_v_regs, TEGRA_PERIPH_ON_APB, hda2codec_2x), + TEGRA_INIT_DATA_MUX("sbc1", NULL, "tegra11-spi.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC1, 41, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc1), + TEGRA_INIT_DATA_MUX("sbc2", NULL, "tegra11-spi.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC2, 44, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc2), + TEGRA_INIT_DATA_MUX("sbc3", NULL, "tegra11-spi.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC3, 46, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc3), + TEGRA_INIT_DATA_MUX("sbc4", NULL, "tegra11-spi.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC4, 68, &periph_u_regs, TEGRA_PERIPH_ON_APB, sbc4), + TEGRA_INIT_DATA_MUX("sbc5", NULL, "tegra11-spi.4", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC5, 104, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc5), + TEGRA_INIT_DATA_MUX("sbc6", NULL, "tegra11-spi.5", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC6, 105, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc6), + TEGRA_INIT_DATA_MUX8("ndflash", NULL, "tegra_nand", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDFLASH, 13, &periph_u_regs, TEGRA_PERIPH_ON_APB, ndspeed), + TEGRA_INIT_DATA_MUX8("ndspeed", NULL, "tegra_nand_speed", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDSPEED, 80, &periph_u_regs, TEGRA_PERIPH_ON_APB, ndspeed), + TEGRA_INIT_DATA_MUX("vfir", NULL, "vfir", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_VFIR, 7, &periph_l_regs, TEGRA_PERIPH_ON_APB, vfir), + TEGRA_INIT_DATA_MUX("sdmmc1", NULL, "sdhci-tegra.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC1, 14, &periph_l_regs, 0, sdmmc1), + TEGRA_INIT_DATA_MUX("sdmmc2", NULL, "sdhci-tegra.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC2, 9, &periph_l_regs, 0, sdmmc2), + TEGRA_INIT_DATA_MUX("sdmmc3", NULL, "sdhci-tegra.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC3, 69, &periph_u_regs, 0, sdmmc3), + TEGRA_INIT_DATA_MUX("sdmmc4", NULL, "sdhci-tegra.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC4, 15, &periph_l_regs, 0, sdmmc4), + TEGRA_INIT_DATA_INT("vde", NULL, "vde", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_VDE, 61, &periph_h_regs, 0, vde), + TEGRA_INIT_DATA_MUX_FLAGS("csite", NULL, "csite", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_CSITE, 73, &periph_u_regs, TEGRA_PERIPH_ON_APB, csite, CLK_IGNORE_UNUSED), + TEGRA_INIT_DATA_MUX("la", NULL, "la", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_LA, 76, &periph_u_regs, TEGRA_PERIPH_ON_APB, la), + TEGRA_INIT_DATA_MUX("trace", NULL, "trace", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_TRACE, 77, &periph_u_regs, TEGRA_PERIPH_ON_APB, trace), + TEGRA_INIT_DATA_MUX("owr", NULL, "tegra_w1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_OWR, 71, &periph_u_regs, TEGRA_PERIPH_ON_APB, owr), + TEGRA_INIT_DATA_MUX("nor", NULL, "tegra-nor", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_NOR, 42, &periph_h_regs, 0, nor), + TEGRA_INIT_DATA_MUX("mipi", NULL, "mipi", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_MIPI, 50, &periph_h_regs, TEGRA_PERIPH_ON_APB, mipi), + TEGRA_INIT_DATA_I2C("i2c1", "div-clk", "tegra11-i2c.0", mux_pllp_clkm, CLK_SOURCE_I2C1, 12, &periph_l_regs, i2c1), + TEGRA_INIT_DATA_I2C("i2c2", "div-clk", "tegra11-i2c.1", mux_pllp_clkm, CLK_SOURCE_I2C2, 54, &periph_h_regs, i2c2), + TEGRA_INIT_DATA_I2C("i2c3", "div-clk", "tegra11-i2c.2", mux_pllp_clkm, CLK_SOURCE_I2C3, 67, &periph_u_regs, i2c3), + TEGRA_INIT_DATA_I2C("i2c4", "div-clk", "tegra11-i2c.3", mux_pllp_clkm, CLK_SOURCE_I2C4, 103, &periph_v_regs, i2c4), + TEGRA_INIT_DATA_I2C("i2c5", "div-clk", "tegra11-i2c.4", mux_pllp_clkm, CLK_SOURCE_I2C5, 47, &periph_h_regs, i2c5), + TEGRA_INIT_DATA_UART("uarta", NULL, "tegra_uart.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTA, 6, &periph_l_regs, uarta), + TEGRA_INIT_DATA_UART("uartb", NULL, "tegra_uart.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTB, 7, &periph_l_regs, uartb), + TEGRA_INIT_DATA_UART("uartc", NULL, "tegra_uart.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTC, 55, &periph_h_regs, uartc), + TEGRA_INIT_DATA_UART("uartd", NULL, "tegra_uart.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTD, 65, &periph_u_regs, uartd), + TEGRA_INIT_DATA_INT("3d", NULL, "3d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_3D, 24, &periph_l_regs, 0, gr_3d), + TEGRA_INIT_DATA_INT("2d", NULL, "2d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_2D, 21, &periph_l_regs, 0, gr_2d), + TEGRA_INIT_DATA_MUX("vi_sensor", "vi_sensor", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR, 20, &periph_l_regs, TEGRA_PERIPH_NO_RESET, vi_sensor), + TEGRA_INIT_DATA_INT8("vi", "vi", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI, 20, &periph_l_regs, 0, vi), + TEGRA_INIT_DATA_INT8("epp", NULL, "epp", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_EPP, 19, &periph_l_regs, 0, epp), + TEGRA_INIT_DATA_INT8("msenc", NULL, "msenc", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_MSENC, 91, &periph_h_regs, TEGRA_PERIPH_WAR_1005168, msenc), + TEGRA_INIT_DATA_INT8("tsec", NULL, "tsec", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_TSEC, 83, &periph_u_regs, 0, tsec), + TEGRA_INIT_DATA_INT8("host1x", NULL, "host1x", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_HOST1X, 28, &periph_l_regs, 0, host1x), + TEGRA_INIT_DATA_MUX8("hdmi", NULL, "hdmi", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_HDMI, 51, &periph_h_regs, 0, hdmi), + TEGRA_INIT_DATA_MUX("cilab", "cilab", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILAB, 144, &periph_w_regs, 0, cilab), + TEGRA_INIT_DATA_MUX("cilcd", "cilcd", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILCD, 145, &periph_w_regs, 0, cilcd), + TEGRA_INIT_DATA_MUX("cile", "cile", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILE, 146, &periph_w_regs, 0, cile), + TEGRA_INIT_DATA_MUX("dsialp", "dsialp", "tegradc.0", mux_pllp_pllc_clkm, CLK_SOURCE_DSIALP, 147, &periph_w_regs, 0, dsialp), + TEGRA_INIT_DATA_MUX("dsiblp", "dsiblp", "tegradc.1", mux_pllp_pllc_clkm, CLK_SOURCE_DSIBLP, 148, &periph_w_regs, 0, dsiblp), + TEGRA_INIT_DATA_MUX("tsensor", NULL, "tegra-tsensor", mux_pllp_pllc_clkm_clk32, CLK_SOURCE_TSENSOR, 100, &periph_v_regs, TEGRA_PERIPH_ON_APB, tsensor), + TEGRA_INIT_DATA_MUX("actmon", NULL, "actmon", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_ACTMON, 119, &periph_v_regs, 0, actmon), + TEGRA_INIT_DATA_MUX8("extern1", NULL, "extern1", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN1, 120, &periph_v_regs, 0, extern1), + TEGRA_INIT_DATA_MUX8("extern2", NULL, "extern2", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN2, 121, &periph_v_regs, 0, extern2), + TEGRA_INIT_DATA_MUX8("extern3", NULL, "extern3", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN3, 122, &periph_v_regs, 0, extern3), + TEGRA_INIT_DATA_MUX("i2cslow", NULL, "i2cslow", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_I2CSLOW, 81, &periph_u_regs, TEGRA_PERIPH_ON_APB, i2cslow), + TEGRA_INIT_DATA_INT8("se", NULL, "se", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SE, 127, &periph_v_regs, TEGRA_PERIPH_ON_APB, se), + TEGRA_INIT_DATA_INT_FLAGS("mselect", NULL, "mselect", mux_pllp_clkm, CLK_SOURCE_MSELECT, 99, &periph_v_regs, 0, mselect, CLK_IGNORE_UNUSED), + TEGRA_INIT_DATA_MUX8("soc_therm", NULL, "soc_therm", mux_pllm_pllc_pllp_plla, CLK_SOURCE_SOC_THERM, 78, &periph_u_regs, TEGRA_PERIPH_ON_APB, soc_therm), + TEGRA_INIT_DATA_XUSB("xusb_host_src", "host_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_HOST_SRC, 143, &periph_w_regs, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, xusb_host_src), + TEGRA_INIT_DATA_XUSB("xusb_falcon_src", "falcon_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_FALCON_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_falcon_src), + TEGRA_INIT_DATA_XUSB("xusb_fs_src", "fs_src", "tegra_xhci", mux_clkm_48M_pllp_480M, CLK_SOURCE_XUSB_FS_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_fs_src), + TEGRA_INIT_DATA_XUSB("xusb_ss_src", "ss_src", "tegra_xhci", mux_clkm_pllre_clk32_480M_pllc_ref, CLK_SOURCE_XUSB_SS_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_ss_src), + TEGRA_INIT_DATA_XUSB("xusb_dev_src", "dev_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_DEV_SRC, 95, &periph_u_regs, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, xusb_dev_src), + TEGRA_INIT_DATA_AUDIO("d_audio", "d_audio", "tegra30-ahub", CLK_SOURCE_D_AUDIO, 106, &periph_v_regs, TEGRA_PERIPH_ON_APB, d_audio), + TEGRA_INIT_DATA_AUDIO("dam0", NULL, "tegra30-dam.0", CLK_SOURCE_DAM0, 108, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam0), + TEGRA_INIT_DATA_AUDIO("dam1", NULL, "tegra30-dam.1", CLK_SOURCE_DAM1, 109, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam1), + TEGRA_INIT_DATA_AUDIO("dam2", NULL, "tegra30-dam.2", CLK_SOURCE_DAM2, 110, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam2), +}; + +static struct tegra_periph_init_data tegra_periph_nodiv_clk_list[] = { + TEGRA_INIT_DATA_NODIV("disp1", NULL, "tegradc.0", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_DISP1, 29, 7, 27, &periph_l_regs, 0, disp1), + TEGRA_INIT_DATA_NODIV("disp2", NULL, "tegradc.1", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_DISP2, 29, 7, 26, &periph_l_regs, 0, disp2), +}; + +static __init void tegra114_periph_clk_init(void __iomem *clk_base) +{ + struct tegra_periph_init_data *data; + struct clk *clk; + int i; + u32 val; + + /* apbdma */ + clk = tegra_clk_register_periph_gate("apbdma", "clk_m", 0, clk_base, + 0, 34, &periph_h_regs, + periph_clk_enb_refcnt); + clks[apbdma] = clk; + + /* rtc */ + clk = tegra_clk_register_periph_gate("rtc", "clk_32k", + TEGRA_PERIPH_ON_APB | + TEGRA_PERIPH_NO_RESET, clk_base, + 0, 4, &periph_l_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, NULL, "rtc-tegra"); + clks[rtc] = clk; + + /* kbc */ + clk = tegra_clk_register_periph_gate("kbc", "clk_32k", + TEGRA_PERIPH_ON_APB | + TEGRA_PERIPH_NO_RESET, clk_base, + 0, 36, &periph_h_regs, + periph_clk_enb_refcnt); + clks[kbc] = clk; + + /* timer */ + clk = tegra_clk_register_periph_gate("timer", "clk_m", 0, clk_base, + 0, 5, &periph_l_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, NULL, "timer"); + clks[timer] = clk; + + /* kfuse */ + clk = tegra_clk_register_periph_gate("kfuse", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 40, + &periph_h_regs, periph_clk_enb_refcnt); + clks[kfuse] = clk; + + /* fuse */ + clk = tegra_clk_register_periph_gate("fuse", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 39, + &periph_h_regs, periph_clk_enb_refcnt); + clks[fuse] = clk; + + /* fuse_burn */ + clk = tegra_clk_register_periph_gate("fuse_burn", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 39, + &periph_h_regs, periph_clk_enb_refcnt); + clks[fuse_burn] = clk; + + /* apbif */ + clk = tegra_clk_register_periph_gate("apbif", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 107, + &periph_v_regs, periph_clk_enb_refcnt); + clks[apbif] = clk; + + /* hda2hdmi */ + clk = tegra_clk_register_periph_gate("hda2hdmi", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 128, + &periph_w_regs, periph_clk_enb_refcnt); + clks[hda2hdmi] = clk; + + /* vcp */ + clk = tegra_clk_register_periph_gate("vcp", "clk_m", 0, clk_base, 0, + 29, &periph_l_regs, + periph_clk_enb_refcnt); + clks[vcp] = clk; + + /* bsea */ + clk = tegra_clk_register_periph_gate("bsea", "clk_m", 0, clk_base, + 0, 62, &periph_h_regs, + periph_clk_enb_refcnt); + clks[bsea] = clk; + + /* bsev */ + clk = tegra_clk_register_periph_gate("bsev", "clk_m", 0, clk_base, + 0, 63, &periph_h_regs, + periph_clk_enb_refcnt); + clks[bsev] = clk; + + /* mipi-cal */ + clk = tegra_clk_register_periph_gate("mipi-cal", "clk_m", 0, clk_base, + 0, 56, &periph_h_regs, + periph_clk_enb_refcnt); + clks[mipi_cal] = clk; + + /* usbd */ + clk = tegra_clk_register_periph_gate("usbd", "clk_m", 0, clk_base, + 0, 22, &periph_l_regs, + periph_clk_enb_refcnt); + clks[usbd] = clk; + + /* usb2 */ + clk = tegra_clk_register_periph_gate("usb2", "clk_m", 0, clk_base, + 0, 58, &periph_h_regs, + periph_clk_enb_refcnt); + clks[usb2] = clk; + + /* usb3 */ + clk = tegra_clk_register_periph_gate("usb3", "clk_m", 0, clk_base, + 0, 59, &periph_h_regs, + periph_clk_enb_refcnt); + clks[usb3] = clk; + + /* csi */ + clk = tegra_clk_register_periph_gate("csi", "pll_p_out3", 0, clk_base, + 0, 52, &periph_h_regs, + periph_clk_enb_refcnt); + clks[csi] = clk; + + /* isp */ + clk = tegra_clk_register_periph_gate("isp", "clk_m", 0, clk_base, 0, + 23, &periph_l_regs, + periph_clk_enb_refcnt); + clks[isp] = clk; + + /* csus */ + clk = tegra_clk_register_periph_gate("csus", "clk_m", + TEGRA_PERIPH_NO_RESET, clk_base, 0, 92, + &periph_u_regs, periph_clk_enb_refcnt); + clks[csus] = clk; + + /* dds */ + clk = tegra_clk_register_periph_gate("dds", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 150, + &periph_w_regs, periph_clk_enb_refcnt); + clks[dds] = clk; + + /* dp2 */ + clk = tegra_clk_register_periph_gate("dp2", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 152, + &periph_w_regs, periph_clk_enb_refcnt); + clks[dp2] = clk; + + /* dtv */ + clk = tegra_clk_register_periph_gate("dtv", "clk_m", + TEGRA_PERIPH_ON_APB, clk_base, 0, 79, + &periph_u_regs, periph_clk_enb_refcnt); + clks[dtv] = clk; + + /* dsia */ + clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0, + ARRAY_SIZE(mux_plld_out0_plld2_out0), 0, + clk_base + PLLD_BASE, 25, 1, 0, &pll_d_lock); + clks[dsia_mux] = clk; + clk = tegra_clk_register_periph_gate("dsia", "dsia_mux", 0, clk_base, + 0, 48, &periph_h_regs, + periph_clk_enb_refcnt); + clks[dsia] = clk; + + /* dsib */ + clk = clk_register_mux(NULL, "dsib_mux", mux_plld_out0_plld2_out0, + ARRAY_SIZE(mux_plld_out0_plld2_out0), 0, + clk_base + PLLD2_BASE, 25, 1, 0, &pll_d2_lock); + clks[dsib_mux] = clk; + clk = tegra_clk_register_periph_gate("dsib", "dsib_mux", 0, clk_base, + 0, 82, &periph_u_regs, + periph_clk_enb_refcnt); + clks[dsib] = clk; + + /* xusb_hs_src */ + val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC); + val |= BIT(25); /* always select PLLU_60M */ + writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC); + + clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0, + 1, 1); + clks[xusb_hs_src] = clk; + + /* xusb_host */ + clk = tegra_clk_register_periph_gate("xusb_host", "xusb_host_src", 0, + clk_base, 0, 89, &periph_u_regs, + periph_clk_enb_refcnt); + clks[xusb_host] = clk; + + /* xusb_ss */ + clk = tegra_clk_register_periph_gate("xusb_ss", "xusb_ss_src", 0, + clk_base, 0, 156, &periph_w_regs, + periph_clk_enb_refcnt); + clks[xusb_host] = clk; + + /* xusb_dev */ + clk = tegra_clk_register_periph_gate("xusb_dev", "xusb_dev_src", 0, + clk_base, 0, 95, &periph_u_regs, + periph_clk_enb_refcnt); + clks[xusb_dev] = clk; + + /* emc */ + clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm, + ARRAY_SIZE(mux_pllmcp_clkm), 0, + clk_base + CLK_SOURCE_EMC, + 29, 3, 0, NULL); + clk = tegra_clk_register_periph_gate("emc", "emc_mux", 0, clk_base, + CLK_IGNORE_UNUSED, 57, &periph_h_regs, + periph_clk_enb_refcnt); + clks[emc] = clk; + + for (i = 0; i < ARRAY_SIZE(tegra_periph_clk_list); i++) { + data = &tegra_periph_clk_list[i]; + clk = tegra_clk_register_periph(data->name, data->parent_names, + data->num_parents, &data->periph, + clk_base, data->offset, data->flags); + clks[data->clk_id] = clk; + } + + for (i = 0; i < ARRAY_SIZE(tegra_periph_nodiv_clk_list); i++) { + data = &tegra_periph_nodiv_clk_list[i]; + clk = tegra_clk_register_periph_nodiv(data->name, + data->parent_names, data->num_parents, + &data->periph, clk_base, data->offset); + clks[data->clk_id] = clk; + } +} + +static struct tegra_cpu_car_ops tegra114_cpu_car_ops; + +static const struct of_device_id pmc_match[] __initconst = { + { .compatible = "nvidia,tegra114-pmc" }, + {}, +}; + +static __initdata struct tegra_clk_init_table init_table[] = { + {uarta, pll_p, 408000000, 0}, + {uartb, pll_p, 408000000, 0}, + {uartc, pll_p, 408000000, 0}, + {uartd, pll_p, 408000000, 0}, + {pll_a, clk_max, 564480000, 1}, + {pll_a_out0, clk_max, 11289600, 1}, + {extern1, pll_a_out0, 0, 1}, + {clk_out_1_mux, extern1, 0, 1}, + {clk_out_1, clk_max, 0, 1}, + {i2s0, pll_a_out0, 11289600, 0}, + {i2s1, pll_a_out0, 11289600, 0}, + {i2s2, pll_a_out0, 11289600, 0}, + {i2s3, pll_a_out0, 11289600, 0}, + {i2s4, pll_a_out0, 11289600, 0}, + {clk_max, clk_max, 0, 0}, /* This MUST be the last entry. */ +}; + +static void __init tegra114_clock_apply_init_table(void) +{ + tegra_init_from_table(init_table, clks, clk_max); +} + +void __init tegra114_clock_init(struct device_node *np) +{ + struct device_node *node; + int i; + + clk_base = of_iomap(np, 0); + if (!clk_base) { + pr_err("ioremap tegra114 CAR failed\n"); + return; + } + + node = of_find_matching_node(NULL, pmc_match); + if (!node) { + pr_err("Failed to find pmc node\n"); + WARN_ON(1); + return; + } + + pmc_base = of_iomap(node, 0); + if (!pmc_base) { + pr_err("Can't map pmc registers\n"); + WARN_ON(1); + return; + } + + if (tegra114_osc_clk_init(clk_base) < 0) + return; + + tegra114_fixed_clk_init(clk_base); + tegra114_pll_init(clk_base, pmc_base); + tegra114_periph_clk_init(clk_base); + tegra114_audio_clk_init(clk_base); + tegra114_pmc_clk_init(pmc_base); + tegra114_super_clk_init(clk_base); + + for (i = 0; i < ARRAY_SIZE(clks); i++) { + if (IS_ERR(clks[i])) { + pr_err + ("Tegra114 clk %d: register failed with %ld\n", + i, PTR_ERR(clks[i])); + } + if (!clks[i]) + clks[i] = ERR_PTR(-EINVAL); + } + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + tegra_clk_apply_init_table = tegra114_clock_apply_init_table; + + tegra_cpu_car_ops = &tegra114_cpu_car_ops; +} diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index bf194009e20f..8292a00c3de9 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -86,8 +86,8 @@ #define PLLE_BASE 0xe8 #define PLLE_MISC 0xec -#define PLL_BASE_LOCK 27 -#define PLLE_MISC_LOCK 11 +#define PLL_BASE_LOCK BIT(27) +#define PLLE_MISC_LOCK BIT(11) #define PLL_MISC_LOCK_ENABLE 18 #define PLLDU_MISC_LOCK_ENABLE 22 @@ -236,7 +236,7 @@ enum tegra20_clk { dvc, dsi, mipi = 50, hdmi, csi, tvdac, i2c2, uartc, emc = 57, usb2, usb3, mpe, vde, bsea, bsev, speedo, uartd, uarte, i2c3, sbc4, sdmmc3, pex, owr, afi, csite, pcie_xclk, avpucq = 75, la, irama = 84, iramb, - iramc, iramd, cram2, audio_2x, clk_d, csus = 92, cdev1, cdev2, + iramc, iramd, cram2, audio_2x, clk_d, csus = 92, cdev2, cdev1, uartb = 96, vfir, spdif_in, spdif_out, vi, vi_sensor, tvo, cve, osc, clk_32k, clk_m, sclk, cclk, hclk, pclk, blink, pll_a, pll_a_out0, pll_c, pll_c_out1, pll_d, pll_d_out0, pll_e, pll_m, pll_m_out1, @@ -248,125 +248,125 @@ static struct clk *clks[clk_max]; static struct clk_onecell_data clk_data; static struct tegra_clk_pll_freq_table pll_c_freq_table[] = { - { 12000000, 600000000, 600, 12, 1, 8 }, - { 13000000, 600000000, 600, 13, 1, 8 }, - { 19200000, 600000000, 500, 16, 1, 6 }, - { 26000000, 600000000, 600, 26, 1, 8 }, + { 12000000, 600000000, 600, 12, 0, 8 }, + { 13000000, 600000000, 600, 13, 0, 8 }, + { 19200000, 600000000, 500, 16, 0, 6 }, + { 26000000, 600000000, 600, 26, 0, 8 }, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_m_freq_table[] = { - { 12000000, 666000000, 666, 12, 1, 8}, - { 13000000, 666000000, 666, 13, 1, 8}, - { 19200000, 666000000, 555, 16, 1, 8}, - { 26000000, 666000000, 666, 26, 1, 8}, - { 12000000, 600000000, 600, 12, 1, 8}, - { 13000000, 600000000, 600, 13, 1, 8}, - { 19200000, 600000000, 375, 12, 1, 6}, - { 26000000, 600000000, 600, 26, 1, 8}, + { 12000000, 666000000, 666, 12, 0, 8}, + { 13000000, 666000000, 666, 13, 0, 8}, + { 19200000, 666000000, 555, 16, 0, 8}, + { 26000000, 666000000, 666, 26, 0, 8}, + { 12000000, 600000000, 600, 12, 0, 8}, + { 13000000, 600000000, 600, 13, 0, 8}, + { 19200000, 600000000, 375, 12, 0, 6}, + { 26000000, 600000000, 600, 26, 0, 8}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_p_freq_table[] = { - { 12000000, 216000000, 432, 12, 2, 8}, - { 13000000, 216000000, 432, 13, 2, 8}, - { 19200000, 216000000, 90, 4, 2, 1}, - { 26000000, 216000000, 432, 26, 2, 8}, - { 12000000, 432000000, 432, 12, 1, 8}, - { 13000000, 432000000, 432, 13, 1, 8}, - { 19200000, 432000000, 90, 4, 1, 1}, - { 26000000, 432000000, 432, 26, 1, 8}, + { 12000000, 216000000, 432, 12, 1, 8}, + { 13000000, 216000000, 432, 13, 1, 8}, + { 19200000, 216000000, 90, 4, 1, 1}, + { 26000000, 216000000, 432, 26, 1, 8}, + { 12000000, 432000000, 432, 12, 0, 8}, + { 13000000, 432000000, 432, 13, 0, 8}, + { 19200000, 432000000, 90, 4, 0, 1}, + { 26000000, 432000000, 432, 26, 0, 8}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_a_freq_table[] = { - { 28800000, 56448000, 49, 25, 1, 1}, - { 28800000, 73728000, 64, 25, 1, 1}, - { 28800000, 24000000, 5, 6, 1, 1}, + { 28800000, 56448000, 49, 25, 0, 1}, + { 28800000, 73728000, 64, 25, 0, 1}, + { 28800000, 24000000, 5, 6, 0, 1}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_d_freq_table[] = { - { 12000000, 216000000, 216, 12, 1, 4}, - { 13000000, 216000000, 216, 13, 1, 4}, - { 19200000, 216000000, 135, 12, 1, 3}, - { 26000000, 216000000, 216, 26, 1, 4}, + { 12000000, 216000000, 216, 12, 0, 4}, + { 13000000, 216000000, 216, 13, 0, 4}, + { 19200000, 216000000, 135, 12, 0, 3}, + { 26000000, 216000000, 216, 26, 0, 4}, - { 12000000, 594000000, 594, 12, 1, 8}, - { 13000000, 594000000, 594, 13, 1, 8}, - { 19200000, 594000000, 495, 16, 1, 8}, - { 26000000, 594000000, 594, 26, 1, 8}, + { 12000000, 594000000, 594, 12, 0, 8}, + { 13000000, 594000000, 594, 13, 0, 8}, + { 19200000, 594000000, 495, 16, 0, 8}, + { 26000000, 594000000, 594, 26, 0, 8}, - { 12000000, 1000000000, 1000, 12, 1, 12}, - { 13000000, 1000000000, 1000, 13, 1, 12}, - { 19200000, 1000000000, 625, 12, 1, 8}, - { 26000000, 1000000000, 1000, 26, 1, 12}, + { 12000000, 1000000000, 1000, 12, 0, 12}, + { 13000000, 1000000000, 1000, 13, 0, 12}, + { 19200000, 1000000000, 625, 12, 0, 8}, + { 26000000, 1000000000, 1000, 26, 0, 12}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_u_freq_table[] = { - { 12000000, 480000000, 960, 12, 2, 0}, - { 13000000, 480000000, 960, 13, 2, 0}, - { 19200000, 480000000, 200, 4, 2, 0}, - { 26000000, 480000000, 960, 26, 2, 0}, + { 12000000, 480000000, 960, 12, 0, 0}, + { 13000000, 480000000, 960, 13, 0, 0}, + { 19200000, 480000000, 200, 4, 0, 0}, + { 26000000, 480000000, 960, 26, 0, 0}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_x_freq_table[] = { /* 1 GHz */ - { 12000000, 1000000000, 1000, 12, 1, 12}, - { 13000000, 1000000000, 1000, 13, 1, 12}, - { 19200000, 1000000000, 625, 12, 1, 8}, - { 26000000, 1000000000, 1000, 26, 1, 12}, + { 12000000, 1000000000, 1000, 12, 0, 12}, + { 13000000, 1000000000, 1000, 13, 0, 12}, + { 19200000, 1000000000, 625, 12, 0, 8}, + { 26000000, 1000000000, 1000, 26, 0, 12}, /* 912 MHz */ - { 12000000, 912000000, 912, 12, 1, 12}, - { 13000000, 912000000, 912, 13, 1, 12}, - { 19200000, 912000000, 760, 16, 1, 8}, - { 26000000, 912000000, 912, 26, 1, 12}, + { 12000000, 912000000, 912, 12, 0, 12}, + { 13000000, 912000000, 912, 13, 0, 12}, + { 19200000, 912000000, 760, 16, 0, 8}, + { 26000000, 912000000, 912, 26, 0, 12}, /* 816 MHz */ - { 12000000, 816000000, 816, 12, 1, 12}, - { 13000000, 816000000, 816, 13, 1, 12}, - { 19200000, 816000000, 680, 16, 1, 8}, - { 26000000, 816000000, 816, 26, 1, 12}, + { 12000000, 816000000, 816, 12, 0, 12}, + { 13000000, 816000000, 816, 13, 0, 12}, + { 19200000, 816000000, 680, 16, 0, 8}, + { 26000000, 816000000, 816, 26, 0, 12}, /* 760 MHz */ - { 12000000, 760000000, 760, 12, 1, 12}, - { 13000000, 760000000, 760, 13, 1, 12}, - { 19200000, 760000000, 950, 24, 1, 8}, - { 26000000, 760000000, 760, 26, 1, 12}, + { 12000000, 760000000, 760, 12, 0, 12}, + { 13000000, 760000000, 760, 13, 0, 12}, + { 19200000, 760000000, 950, 24, 0, 8}, + { 26000000, 760000000, 760, 26, 0, 12}, /* 750 MHz */ - { 12000000, 750000000, 750, 12, 1, 12}, - { 13000000, 750000000, 750, 13, 1, 12}, - { 19200000, 750000000, 625, 16, 1, 8}, - { 26000000, 750000000, 750, 26, 1, 12}, + { 12000000, 750000000, 750, 12, 0, 12}, + { 13000000, 750000000, 750, 13, 0, 12}, + { 19200000, 750000000, 625, 16, 0, 8}, + { 26000000, 750000000, 750, 26, 0, 12}, /* 608 MHz */ - { 12000000, 608000000, 608, 12, 1, 12}, - { 13000000, 608000000, 608, 13, 1, 12}, - { 19200000, 608000000, 380, 12, 1, 8}, - { 26000000, 608000000, 608, 26, 1, 12}, + { 12000000, 608000000, 608, 12, 0, 12}, + { 13000000, 608000000, 608, 13, 0, 12}, + { 19200000, 608000000, 380, 12, 0, 8}, + { 26000000, 608000000, 608, 26, 0, 12}, /* 456 MHz */ - { 12000000, 456000000, 456, 12, 1, 12}, - { 13000000, 456000000, 456, 13, 1, 12}, - { 19200000, 456000000, 380, 16, 1, 8}, - { 26000000, 456000000, 456, 26, 1, 12}, + { 12000000, 456000000, 456, 12, 0, 12}, + { 13000000, 456000000, 456, 13, 0, 12}, + { 19200000, 456000000, 380, 16, 0, 8}, + { 26000000, 456000000, 456, 26, 0, 12}, /* 312 MHz */ - { 12000000, 312000000, 312, 12, 1, 12}, - { 13000000, 312000000, 312, 13, 1, 12}, - { 19200000, 312000000, 260, 16, 1, 8}, - { 26000000, 312000000, 312, 26, 1, 12}, + { 12000000, 312000000, 312, 12, 0, 12}, + { 13000000, 312000000, 312, 13, 0, 12}, + { 19200000, 312000000, 260, 16, 0, 8}, + { 26000000, 312000000, 312, 26, 0, 12}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_e_freq_table[] = { - { 12000000, 100000000, 200, 24, 1, 0 }, + { 12000000, 100000000, 200, 24, 0, 0 }, { 0, 0, 0, 0, 0, 0 }, }; @@ -380,7 +380,7 @@ static struct tegra_clk_pll_params pll_c_params = { .vco_max = 1400000000, .base_reg = PLLC_BASE, .misc_reg = PLLC_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -394,7 +394,7 @@ static struct tegra_clk_pll_params pll_m_params = { .vco_max = 1200000000, .base_reg = PLLM_BASE, .misc_reg = PLLM_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -408,7 +408,7 @@ static struct tegra_clk_pll_params pll_p_params = { .vco_max = 1400000000, .base_reg = PLLP_BASE, .misc_reg = PLLP_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -422,7 +422,7 @@ static struct tegra_clk_pll_params pll_a_params = { .vco_max = 1400000000, .base_reg = PLLA_BASE, .misc_reg = PLLA_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -436,11 +436,17 @@ static struct tegra_clk_pll_params pll_d_params = { .vco_max = 1000000000, .base_reg = PLLD_BASE, .misc_reg = PLLD_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, .lock_delay = 1000, }; +static struct pdiv_map pllu_p[] = { + { .pdiv = 1, .hw_val = 1 }, + { .pdiv = 2, .hw_val = 0 }, + { .pdiv = 0, .hw_val = 0 }, +}; + static struct tegra_clk_pll_params pll_u_params = { .input_min = 2000000, .input_max = 40000000, @@ -450,9 +456,10 @@ static struct tegra_clk_pll_params pll_u_params = { .vco_max = 960000000, .base_reg = PLLU_BASE, .misc_reg = PLLU_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, .lock_delay = 1000, + .pdiv_tohw = pllu_p, }; static struct tegra_clk_pll_params pll_x_params = { @@ -464,7 +471,7 @@ static struct tegra_clk_pll_params pll_x_params = { .vco_max = 1200000000, .base_reg = PLLX_BASE, .misc_reg = PLLX_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -478,7 +485,7 @@ static struct tegra_clk_pll_params pll_e_params = { .vco_max = 0, .base_reg = PLLE_BASE, .misc_reg = PLLE_MISC, - .lock_bit_idx = PLLE_MISC_LOCK, + .lock_mask = PLLE_MISC_LOCK, .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE, .lock_delay = 0, }; @@ -1012,7 +1019,7 @@ static void __init tegra20_periph_clk_init(void) data = &tegra_periph_clk_list[i]; clk = tegra_clk_register_periph(data->name, data->parent_names, data->num_parents, &data->periph, - clk_base, data->offset); + clk_base, data->offset, data->flags); clk_register_clkdev(clk, data->con_id, data->dev_id); clks[data->clk_id] = clk; } @@ -1247,9 +1254,16 @@ static __initdata struct tegra_clk_init_table init_table[] = { {host1x, pll_c, 150000000, 0}, {disp1, pll_p, 600000000, 0}, {disp2, pll_p, 600000000, 0}, + {gr2d, pll_c, 300000000, 0}, + {gr3d, pll_c, 300000000, 0}, {clk_max, clk_max, 0, 0}, /* This MUST be the last entry */ }; +static void __init tegra20_clock_apply_init_table(void) +{ + tegra_init_from_table(init_table, clks, clk_max); +} + /* * Some clocks may be used by different drivers depending on the board * configuration. List those here to register them twice in the clock lookup @@ -1316,7 +1330,7 @@ void __init tegra20_clock_init(struct device_node *np) clk_data.clk_num = ARRAY_SIZE(clks); of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - tegra_init_from_table(init_table, clks, clk_max); + tegra_clk_apply_init_table = tegra20_clock_apply_init_table; tegra_cpu_car_ops = &tegra20_cpu_car_ops; } diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c index f15f147d473c..c6921f538e28 100644 --- a/drivers/clk/tegra/clk-tegra30.c +++ b/drivers/clk/tegra/clk-tegra30.c @@ -115,8 +115,8 @@ #define PLLDU_MISC_LOCK_ENABLE 22 #define PLLE_MISC_LOCK_ENABLE 9 -#define PLL_BASE_LOCK 27 -#define PLLE_MISC_LOCK 11 +#define PLL_BASE_LOCK BIT(27) +#define PLLE_MISC_LOCK BIT(11) #define PLLE_AUX 0x48c #define PLLC_OUT 0x84 @@ -329,7 +329,7 @@ enum tegra30_clk { usb3, mpe, vde, bsea, bsev, speedo, uartd, uarte, i2c3, sbc4, sdmmc3, pcie, owr, afi, csite, pciex, avpucq, la, dtv = 79, ndspeed, i2cslow, dsib, irama = 84, iramb, iramc, iramd, cram2, audio_2x = 90, csus = 92, - cdev1, cdev2, cpu_g = 96, cpu_lp, gr3d2, mselect, tsensor, i2s3, i2s4, + cdev2, cdev1, cpu_g = 96, cpu_lp, gr3d2, mselect, tsensor, i2s3, i2s4, i2c4, sbc5, sbc6, d_audio, apbif, dam0, dam1, dam2, hda2codec_2x, atomics, audio0_2x, audio1_2x, audio2_2x, audio3_2x, audio4_2x, spdif_2x, actmon, extern1, extern2, extern3, sata_oob, sata, hda, @@ -373,164 +373,170 @@ static const struct utmi_clk_param utmi_parameters[] = { }; static struct tegra_clk_pll_freq_table pll_c_freq_table[] = { - { 12000000, 1040000000, 520, 6, 1, 8}, - { 13000000, 1040000000, 480, 6, 1, 8}, - { 16800000, 1040000000, 495, 8, 1, 8}, /* actual: 1039.5 MHz */ - { 19200000, 1040000000, 325, 6, 1, 6}, - { 26000000, 1040000000, 520, 13, 1, 8}, - - { 12000000, 832000000, 416, 6, 1, 8}, - { 13000000, 832000000, 832, 13, 1, 8}, - { 16800000, 832000000, 396, 8, 1, 8}, /* actual: 831.6 MHz */ - { 19200000, 832000000, 260, 6, 1, 8}, - { 26000000, 832000000, 416, 13, 1, 8}, - - { 12000000, 624000000, 624, 12, 1, 8}, - { 13000000, 624000000, 624, 13, 1, 8}, - { 16800000, 600000000, 520, 14, 1, 8}, - { 19200000, 624000000, 520, 16, 1, 8}, - { 26000000, 624000000, 624, 26, 1, 8}, - - { 12000000, 600000000, 600, 12, 1, 8}, - { 13000000, 600000000, 600, 13, 1, 8}, - { 16800000, 600000000, 500, 14, 1, 8}, - { 19200000, 600000000, 375, 12, 1, 6}, - { 26000000, 600000000, 600, 26, 1, 8}, - - { 12000000, 520000000, 520, 12, 1, 8}, - { 13000000, 520000000, 520, 13, 1, 8}, - { 16800000, 520000000, 495, 16, 1, 8}, /* actual: 519.75 MHz */ - { 19200000, 520000000, 325, 12, 1, 6}, - { 26000000, 520000000, 520, 26, 1, 8}, - - { 12000000, 416000000, 416, 12, 1, 8}, - { 13000000, 416000000, 416, 13, 1, 8}, - { 16800000, 416000000, 396, 16, 1, 8}, /* actual: 415.8 MHz */ - { 19200000, 416000000, 260, 12, 1, 6}, - { 26000000, 416000000, 416, 26, 1, 8}, + { 12000000, 1040000000, 520, 6, 0, 8}, + { 13000000, 1040000000, 480, 6, 0, 8}, + { 16800000, 1040000000, 495, 8, 0, 8}, /* actual: 1039.5 MHz */ + { 19200000, 1040000000, 325, 6, 0, 6}, + { 26000000, 1040000000, 520, 13, 0, 8}, + + { 12000000, 832000000, 416, 6, 0, 8}, + { 13000000, 832000000, 832, 13, 0, 8}, + { 16800000, 832000000, 396, 8, 0, 8}, /* actual: 831.6 MHz */ + { 19200000, 832000000, 260, 6, 0, 8}, + { 26000000, 832000000, 416, 13, 0, 8}, + + { 12000000, 624000000, 624, 12, 0, 8}, + { 13000000, 624000000, 624, 13, 0, 8}, + { 16800000, 600000000, 520, 14, 0, 8}, + { 19200000, 624000000, 520, 16, 0, 8}, + { 26000000, 624000000, 624, 26, 0, 8}, + + { 12000000, 600000000, 600, 12, 0, 8}, + { 13000000, 600000000, 600, 13, 0, 8}, + { 16800000, 600000000, 500, 14, 0, 8}, + { 19200000, 600000000, 375, 12, 0, 6}, + { 26000000, 600000000, 600, 26, 0, 8}, + + { 12000000, 520000000, 520, 12, 0, 8}, + { 13000000, 520000000, 520, 13, 0, 8}, + { 16800000, 520000000, 495, 16, 0, 8}, /* actual: 519.75 MHz */ + { 19200000, 520000000, 325, 12, 0, 6}, + { 26000000, 520000000, 520, 26, 0, 8}, + + { 12000000, 416000000, 416, 12, 0, 8}, + { 13000000, 416000000, 416, 13, 0, 8}, + { 16800000, 416000000, 396, 16, 0, 8}, /* actual: 415.8 MHz */ + { 19200000, 416000000, 260, 12, 0, 6}, + { 26000000, 416000000, 416, 26, 0, 8}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_m_freq_table[] = { - { 12000000, 666000000, 666, 12, 1, 8}, - { 13000000, 666000000, 666, 13, 1, 8}, - { 16800000, 666000000, 555, 14, 1, 8}, - { 19200000, 666000000, 555, 16, 1, 8}, - { 26000000, 666000000, 666, 26, 1, 8}, - { 12000000, 600000000, 600, 12, 1, 8}, - { 13000000, 600000000, 600, 13, 1, 8}, - { 16800000, 600000000, 500, 14, 1, 8}, - { 19200000, 600000000, 375, 12, 1, 6}, - { 26000000, 600000000, 600, 26, 1, 8}, + { 12000000, 666000000, 666, 12, 0, 8}, + { 13000000, 666000000, 666, 13, 0, 8}, + { 16800000, 666000000, 555, 14, 0, 8}, + { 19200000, 666000000, 555, 16, 0, 8}, + { 26000000, 666000000, 666, 26, 0, 8}, + { 12000000, 600000000, 600, 12, 0, 8}, + { 13000000, 600000000, 600, 13, 0, 8}, + { 16800000, 600000000, 500, 14, 0, 8}, + { 19200000, 600000000, 375, 12, 0, 6}, + { 26000000, 600000000, 600, 26, 0, 8}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_p_freq_table[] = { - { 12000000, 216000000, 432, 12, 2, 8}, - { 13000000, 216000000, 432, 13, 2, 8}, - { 16800000, 216000000, 360, 14, 2, 8}, - { 19200000, 216000000, 360, 16, 2, 8}, - { 26000000, 216000000, 432, 26, 2, 8}, + { 12000000, 216000000, 432, 12, 1, 8}, + { 13000000, 216000000, 432, 13, 1, 8}, + { 16800000, 216000000, 360, 14, 1, 8}, + { 19200000, 216000000, 360, 16, 1, 8}, + { 26000000, 216000000, 432, 26, 1, 8}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_a_freq_table[] = { - { 9600000, 564480000, 294, 5, 1, 4}, - { 9600000, 552960000, 288, 5, 1, 4}, - { 9600000, 24000000, 5, 2, 1, 1}, + { 9600000, 564480000, 294, 5, 0, 4}, + { 9600000, 552960000, 288, 5, 0, 4}, + { 9600000, 24000000, 5, 2, 0, 1}, - { 28800000, 56448000, 49, 25, 1, 1}, - { 28800000, 73728000, 64, 25, 1, 1}, - { 28800000, 24000000, 5, 6, 1, 1}, + { 28800000, 56448000, 49, 25, 0, 1}, + { 28800000, 73728000, 64, 25, 0, 1}, + { 28800000, 24000000, 5, 6, 0, 1}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_d_freq_table[] = { - { 12000000, 216000000, 216, 12, 1, 4}, - { 13000000, 216000000, 216, 13, 1, 4}, - { 16800000, 216000000, 180, 14, 1, 4}, - { 19200000, 216000000, 180, 16, 1, 4}, - { 26000000, 216000000, 216, 26, 1, 4}, - - { 12000000, 594000000, 594, 12, 1, 8}, - { 13000000, 594000000, 594, 13, 1, 8}, - { 16800000, 594000000, 495, 14, 1, 8}, - { 19200000, 594000000, 495, 16, 1, 8}, - { 26000000, 594000000, 594, 26, 1, 8}, - - { 12000000, 1000000000, 1000, 12, 1, 12}, - { 13000000, 1000000000, 1000, 13, 1, 12}, - { 19200000, 1000000000, 625, 12, 1, 8}, - { 26000000, 1000000000, 1000, 26, 1, 12}, + { 12000000, 216000000, 216, 12, 0, 4}, + { 13000000, 216000000, 216, 13, 0, 4}, + { 16800000, 216000000, 180, 14, 0, 4}, + { 19200000, 216000000, 180, 16, 0, 4}, + { 26000000, 216000000, 216, 26, 0, 4}, + + { 12000000, 594000000, 594, 12, 0, 8}, + { 13000000, 594000000, 594, 13, 0, 8}, + { 16800000, 594000000, 495, 14, 0, 8}, + { 19200000, 594000000, 495, 16, 0, 8}, + { 26000000, 594000000, 594, 26, 0, 8}, + + { 12000000, 1000000000, 1000, 12, 0, 12}, + { 13000000, 1000000000, 1000, 13, 0, 12}, + { 19200000, 1000000000, 625, 12, 0, 8}, + { 26000000, 1000000000, 1000, 26, 0, 12}, { 0, 0, 0, 0, 0, 0 }, }; +static struct pdiv_map pllu_p[] = { + { .pdiv = 1, .hw_val = 1 }, + { .pdiv = 2, .hw_val = 0 }, + { .pdiv = 0, .hw_val = 0 }, +}; + static struct tegra_clk_pll_freq_table pll_u_freq_table[] = { - { 12000000, 480000000, 960, 12, 2, 12}, - { 13000000, 480000000, 960, 13, 2, 12}, - { 16800000, 480000000, 400, 7, 2, 5}, - { 19200000, 480000000, 200, 4, 2, 3}, - { 26000000, 480000000, 960, 26, 2, 12}, + { 12000000, 480000000, 960, 12, 0, 12}, + { 13000000, 480000000, 960, 13, 0, 12}, + { 16800000, 480000000, 400, 7, 0, 5}, + { 19200000, 480000000, 200, 4, 0, 3}, + { 26000000, 480000000, 960, 26, 0, 12}, { 0, 0, 0, 0, 0, 0 }, }; static struct tegra_clk_pll_freq_table pll_x_freq_table[] = { /* 1.7 GHz */ - { 12000000, 1700000000, 850, 6, 1, 8}, - { 13000000, 1700000000, 915, 7, 1, 8}, /* actual: 1699.2 MHz */ - { 16800000, 1700000000, 708, 7, 1, 8}, /* actual: 1699.2 MHz */ - { 19200000, 1700000000, 885, 10, 1, 8}, /* actual: 1699.2 MHz */ - { 26000000, 1700000000, 850, 13, 1, 8}, + { 12000000, 1700000000, 850, 6, 0, 8}, + { 13000000, 1700000000, 915, 7, 0, 8}, /* actual: 1699.2 MHz */ + { 16800000, 1700000000, 708, 7, 0, 8}, /* actual: 1699.2 MHz */ + { 19200000, 1700000000, 885, 10, 0, 8}, /* actual: 1699.2 MHz */ + { 26000000, 1700000000, 850, 13, 0, 8}, /* 1.6 GHz */ - { 12000000, 1600000000, 800, 6, 1, 8}, - { 13000000, 1600000000, 738, 6, 1, 8}, /* actual: 1599.0 MHz */ - { 16800000, 1600000000, 857, 9, 1, 8}, /* actual: 1599.7 MHz */ - { 19200000, 1600000000, 500, 6, 1, 8}, - { 26000000, 1600000000, 800, 13, 1, 8}, + { 12000000, 1600000000, 800, 6, 0, 8}, + { 13000000, 1600000000, 738, 6, 0, 8}, /* actual: 1599.0 MHz */ + { 16800000, 1600000000, 857, 9, 0, 8}, /* actual: 1599.7 MHz */ + { 19200000, 1600000000, 500, 6, 0, 8}, + { 26000000, 1600000000, 800, 13, 0, 8}, /* 1.5 GHz */ - { 12000000, 1500000000, 750, 6, 1, 8}, - { 13000000, 1500000000, 923, 8, 1, 8}, /* actual: 1499.8 MHz */ - { 16800000, 1500000000, 625, 7, 1, 8}, - { 19200000, 1500000000, 625, 8, 1, 8}, - { 26000000, 1500000000, 750, 13, 1, 8}, + { 12000000, 1500000000, 750, 6, 0, 8}, + { 13000000, 1500000000, 923, 8, 0, 8}, /* actual: 1499.8 MHz */ + { 16800000, 1500000000, 625, 7, 0, 8}, + { 19200000, 1500000000, 625, 8, 0, 8}, + { 26000000, 1500000000, 750, 13, 0, 8}, /* 1.4 GHz */ - { 12000000, 1400000000, 700, 6, 1, 8}, - { 13000000, 1400000000, 969, 9, 1, 8}, /* actual: 1399.7 MHz */ - { 16800000, 1400000000, 1000, 12, 1, 8}, - { 19200000, 1400000000, 875, 12, 1, 8}, - { 26000000, 1400000000, 700, 13, 1, 8}, + { 12000000, 1400000000, 700, 6, 0, 8}, + { 13000000, 1400000000, 969, 9, 0, 8}, /* actual: 1399.7 MHz */ + { 16800000, 1400000000, 1000, 12, 0, 8}, + { 19200000, 1400000000, 875, 12, 0, 8}, + { 26000000, 1400000000, 700, 13, 0, 8}, /* 1.3 GHz */ - { 12000000, 1300000000, 975, 9, 1, 8}, - { 13000000, 1300000000, 1000, 10, 1, 8}, - { 16800000, 1300000000, 928, 12, 1, 8}, /* actual: 1299.2 MHz */ - { 19200000, 1300000000, 812, 12, 1, 8}, /* actual: 1299.2 MHz */ - { 26000000, 1300000000, 650, 13, 1, 8}, + { 12000000, 1300000000, 975, 9, 0, 8}, + { 13000000, 1300000000, 1000, 10, 0, 8}, + { 16800000, 1300000000, 928, 12, 0, 8}, /* actual: 1299.2 MHz */ + { 19200000, 1300000000, 812, 12, 0, 8}, /* actual: 1299.2 MHz */ + { 26000000, 1300000000, 650, 13, 0, 8}, /* 1.2 GHz */ - { 12000000, 1200000000, 1000, 10, 1, 8}, - { 13000000, 1200000000, 923, 10, 1, 8}, /* actual: 1199.9 MHz */ - { 16800000, 1200000000, 1000, 14, 1, 8}, - { 19200000, 1200000000, 1000, 16, 1, 8}, - { 26000000, 1200000000, 600, 13, 1, 8}, + { 12000000, 1200000000, 1000, 10, 0, 8}, + { 13000000, 1200000000, 923, 10, 0, 8}, /* actual: 1199.9 MHz */ + { 16800000, 1200000000, 1000, 14, 0, 8}, + { 19200000, 1200000000, 1000, 16, 0, 8}, + { 26000000, 1200000000, 600, 13, 0, 8}, /* 1.1 GHz */ - { 12000000, 1100000000, 825, 9, 1, 8}, - { 13000000, 1100000000, 846, 10, 1, 8}, /* actual: 1099.8 MHz */ - { 16800000, 1100000000, 982, 15, 1, 8}, /* actual: 1099.8 MHz */ - { 19200000, 1100000000, 859, 15, 1, 8}, /* actual: 1099.5 MHz */ - { 26000000, 1100000000, 550, 13, 1, 8}, + { 12000000, 1100000000, 825, 9, 0, 8}, + { 13000000, 1100000000, 846, 10, 0, 8}, /* actual: 1099.8 MHz */ + { 16800000, 1100000000, 982, 15, 0, 8}, /* actual: 1099.8 MHz */ + { 19200000, 1100000000, 859, 15, 0, 8}, /* actual: 1099.5 MHz */ + { 26000000, 1100000000, 550, 13, 0, 8}, /* 1 GHz */ - { 12000000, 1000000000, 1000, 12, 1, 8}, - { 13000000, 1000000000, 1000, 13, 1, 8}, - { 16800000, 1000000000, 833, 14, 1, 8}, /* actual: 999.6 MHz */ - { 19200000, 1000000000, 625, 12, 1, 8}, - { 26000000, 1000000000, 1000, 26, 1, 8}, + { 12000000, 1000000000, 1000, 12, 0, 8}, + { 13000000, 1000000000, 1000, 13, 0, 8}, + { 16800000, 1000000000, 833, 14, 0, 8}, /* actual: 999.6 MHz */ + { 19200000, 1000000000, 625, 12, 0, 8}, + { 26000000, 1000000000, 1000, 26, 0, 8}, { 0, 0, 0, 0, 0, 0 }, }; @@ -552,7 +558,7 @@ static struct tegra_clk_pll_params pll_c_params = { .vco_max = 1400000000, .base_reg = PLLC_BASE, .misc_reg = PLLC_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -566,7 +572,7 @@ static struct tegra_clk_pll_params pll_m_params = { .vco_max = 1200000000, .base_reg = PLLM_BASE, .misc_reg = PLLM_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -580,7 +586,7 @@ static struct tegra_clk_pll_params pll_p_params = { .vco_max = 1400000000, .base_reg = PLLP_BASE, .misc_reg = PLLP_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -594,7 +600,7 @@ static struct tegra_clk_pll_params pll_a_params = { .vco_max = 1400000000, .base_reg = PLLA_BASE, .misc_reg = PLLA_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -608,7 +614,7 @@ static struct tegra_clk_pll_params pll_d_params = { .vco_max = 1000000000, .base_reg = PLLD_BASE, .misc_reg = PLLD_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, .lock_delay = 1000, }; @@ -622,7 +628,7 @@ static struct tegra_clk_pll_params pll_d2_params = { .vco_max = 1000000000, .base_reg = PLLD2_BASE, .misc_reg = PLLD2_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, .lock_delay = 1000, }; @@ -636,9 +642,10 @@ static struct tegra_clk_pll_params pll_u_params = { .vco_max = 960000000, .base_reg = PLLU_BASE, .misc_reg = PLLU_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE, .lock_delay = 1000, + .pdiv_tohw = pllu_p, }; static struct tegra_clk_pll_params pll_x_params = { @@ -650,7 +657,7 @@ static struct tegra_clk_pll_params pll_x_params = { .vco_max = 1700000000, .base_reg = PLLX_BASE, .misc_reg = PLLX_MISC, - .lock_bit_idx = PLL_BASE_LOCK, + .lock_mask = PLL_BASE_LOCK, .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -664,7 +671,7 @@ static struct tegra_clk_pll_params pll_e_params = { .vco_max = 2400000000U, .base_reg = PLLE_BASE, .misc_reg = PLLE_MISC, - .lock_bit_idx = PLLE_MISC_LOCK, + .lock_mask = PLLE_MISC_LOCK, .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE, .lock_delay = 300, }; @@ -1660,7 +1667,7 @@ static void __init tegra30_periph_clk_init(void) data = &tegra_periph_clk_list[i]; clk = tegra_clk_register_periph(data->name, data->parent_names, data->num_parents, &data->periph, - clk_base, data->offset); + clk_base, data->offset, data->flags); clk_register_clkdev(clk, data->con_id, data->dev_id); clks[data->clk_id] = clk; } @@ -1910,9 +1917,16 @@ static __initdata struct tegra_clk_init_table init_table[] = { {disp1, pll_p, 600000000, 0}, {disp2, pll_p, 600000000, 0}, {twd, clk_max, 0, 1}, + {gr2d, pll_c, 300000000, 0}, + {gr3d, pll_c, 300000000, 0}, {clk_max, clk_max, 0, 0}, /* This MUST be the last entry. */ }; +static void __init tegra30_clock_apply_init_table(void) +{ + tegra_init_from_table(init_table, clks, clk_max); +} + /* * Some clocks may be used by different drivers depending on the board * configuration. List those here to register them twice in the clock lookup @@ -1986,7 +2000,7 @@ void __init tegra30_clock_init(struct device_node *np) clk_data.clk_num = ARRAY_SIZE(clks); of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - tegra_init_from_table(init_table, clks, clk_max); + tegra_clk_apply_init_table = tegra30_clock_apply_init_table; tegra_cpu_car_ops = &tegra30_cpu_car_ops; } diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c index a603b9af0ad3..923ca7ee4694 100644 --- a/drivers/clk/tegra/clk.c +++ b/drivers/clk/tegra/clk.c @@ -22,7 +22,8 @@ #include "clk.h" /* Global data of Tegra CPU CAR ops */ -struct tegra_cpu_car_ops *tegra_cpu_car_ops; +static struct tegra_cpu_car_ops dummy_car_ops; +struct tegra_cpu_car_ops *tegra_cpu_car_ops = &dummy_car_ops; void __init tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list, struct clk *clks[], int clk_max) @@ -76,6 +77,7 @@ void __init tegra_init_from_table(struct tegra_clk_init_table *tbl, static const struct of_device_id tegra_dt_clk_match[] = { { .compatible = "nvidia,tegra20-car", .data = tegra20_clock_init }, { .compatible = "nvidia,tegra30-car", .data = tegra30_clock_init }, + { .compatible = "nvidia,tegra114-car", .data = tegra114_clock_init }, { } }; @@ -83,3 +85,13 @@ void __init tegra_clocks_init(void) { of_clk_init(tegra_dt_clk_match); } + +tegra_clk_apply_init_table_func tegra_clk_apply_init_table; + +void __init tegra_clocks_apply_init_table(void) +{ + if (!tegra_clk_apply_init_table) + return; + + tegra_clk_apply_init_table(); +} diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h index a09d7dcaf183..e0565620d68e 100644 --- a/drivers/clk/tegra/clk.h +++ b/drivers/clk/tegra/clk.h @@ -1,4 +1,4 @@ -/* + /* * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -117,6 +117,17 @@ struct tegra_clk_pll_freq_table { }; /** + * struct pdiv_map - map post divider to hw value + * + * @pdiv: post divider + * @hw_val: value to be written to the PLL hw + */ +struct pdiv_map { + u8 pdiv; + u8 hw_val; +}; + +/** * struct clk_pll_params - PLL parameters * * @input_min: Minimum input frequency @@ -143,9 +154,18 @@ struct tegra_clk_pll_params { u32 base_reg; u32 misc_reg; u32 lock_reg; - u32 lock_bit_idx; + u32 lock_mask; u32 lock_enable_bit_idx; + u32 iddq_reg; + u32 iddq_bit_idx; + u32 aux_reg; + u32 dyn_ramp_reg; + u32 ext_misc_reg[3]; + int stepa_shift; + int stepb_shift; int lock_delay; + int max_p; + struct pdiv_map *pdiv_tohw; }; /** @@ -182,12 +202,16 @@ struct tegra_clk_pll_params { * TEGRA_PLL_FIXED - We are not supposed to change output frequency * of some plls. * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling. + * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the + * base register. + * TEGRA_PLL_BYPASS - PLL has bypass bit + * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring */ struct tegra_clk_pll { struct clk_hw hw; void __iomem *clk_base; void __iomem *pmc; - u8 flags; + u32 flags; unsigned long fixed_rate; spinlock_t *lock; u8 divn_shift; @@ -210,20 +234,64 @@ struct tegra_clk_pll { #define TEGRA_PLLM BIT(5) #define TEGRA_PLL_FIXED BIT(6) #define TEGRA_PLLE_CONFIGURE BIT(7) +#define TEGRA_PLL_LOCK_MISC BIT(8) +#define TEGRA_PLL_BYPASS BIT(9) +#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10) extern const struct clk_ops tegra_clk_pll_ops; extern const struct clk_ops tegra_clk_plle_ops; struct clk *tegra_clk_register_pll(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, unsigned long fixed_rate, - struct tegra_clk_pll_params *pll_params, u8 pll_flags, + struct tegra_clk_pll_params *pll_params, u32 pll_flags, struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock); + struct clk *tegra_clk_register_plle(const char *name, const char *parent_name, void __iomem *clk_base, void __iomem *pmc, unsigned long flags, unsigned long fixed_rate, - struct tegra_clk_pll_params *pll_params, u8 pll_flags, + struct tegra_clk_pll_params *pll_params, u32 pll_flags, struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock); +struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock); + +struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock); + +struct clk *tegra_clk_register_pllc(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock); + +struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name, + void __iomem *clk_base, void __iomem *pmc, + unsigned long flags, unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + u32 pll_flags, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock, unsigned long parent_rate); + +struct clk *tegra_clk_register_plle_tegra114(const char *name, + const char *parent_name, + void __iomem *clk_base, unsigned long flags, + unsigned long fixed_rate, + struct tegra_clk_pll_params *pll_params, + struct tegra_clk_pll_freq_table *freq_table, + spinlock_t *lock); + /** * struct tegra_clk_pll_out - PLL divider down clock * @@ -290,6 +358,7 @@ struct tegra_clk_periph_regs { * TEGRA_PERIPH_ON_APB - If peripheral is in the APB bus then read the * bus to flush the write operation in apb bus. This flag indicates * that this peripheral is in apb bus. + * TEGRA_PERIPH_WAR_1005168 - Apply workaround for Tegra114 MSENC bug */ struct tegra_clk_periph_gate { u32 magic; @@ -309,6 +378,7 @@ struct tegra_clk_periph_gate { #define TEGRA_PERIPH_NO_RESET BIT(0) #define TEGRA_PERIPH_MANUAL_RESET BIT(1) #define TEGRA_PERIPH_ON_APB BIT(2) +#define TEGRA_PERIPH_WAR_1005168 BIT(3) void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert); extern const struct clk_ops tegra_clk_periph_gate_ops; @@ -349,7 +419,7 @@ extern const struct clk_ops tegra_clk_periph_ops; struct clk *tegra_clk_register_periph(const char *name, const char **parent_names, int num_parents, struct tegra_clk_periph *periph, void __iomem *clk_base, - u32 offset); + u32 offset, unsigned long flags); struct clk *tegra_clk_register_periph_nodiv(const char *name, const char **parent_names, int num_parents, struct tegra_clk_periph *periph, void __iomem *clk_base, @@ -392,12 +462,14 @@ struct tegra_periph_init_data { u32 offset; const char *con_id; const char *dev_id; + unsigned long flags; }; #define TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\ _mux_shift, _mux_mask, _mux_flags, _div_shift, \ _div_width, _div_frac_width, _div_flags, _regs, \ - _clk_num, _enb_refcnt, _gate_flags, _clk_id, _table) \ + _clk_num, _enb_refcnt, _gate_flags, _clk_id, _table,\ + _flags) \ { \ .name = _name, \ .clk_id = _clk_id, \ @@ -412,6 +484,7 @@ struct tegra_periph_init_data { .offset = _offset, \ .con_id = _con_id, \ .dev_id = _dev_id, \ + .flags = _flags \ } #define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset,\ @@ -422,7 +495,7 @@ struct tegra_periph_init_data { _mux_shift, BIT(_mux_width) - 1, _mux_flags, \ _div_shift, _div_width, _div_frac_width, _div_flags, \ _regs, _clk_num, _enb_refcnt, _gate_flags, _clk_id,\ - NULL) + NULL, 0) /** * struct clk_super_mux - super clock @@ -510,4 +583,13 @@ void tegra30_clock_init(struct device_node *np); static inline void tegra30_clock_init(struct device_node *np) {} #endif /* CONFIG_ARCH_TEGRA_3x_SOC */ +#ifdef CONFIG_ARCH_TEGRA_114_SOC +void tegra114_clock_init(struct device_node *np); +#else +static inline void tegra114_clock_init(struct device_node *np) {} +#endif /* CONFIG_ARCH_TEGRA114_SOC */ + +typedef void (*tegra_clk_apply_init_table_func)(void); +extern tegra_clk_apply_init_table_func tegra_clk_apply_init_table; + #endif /* TEGRA_CLK_H */ diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 9002185a0a1a..7bc6e51757ee 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -31,6 +31,9 @@ config SUN4I_TIMER config VT8500_TIMER bool +config CADENCE_TTC_TIMER + bool + config CLKSRC_NOMADIK_MTU bool depends on (ARCH_NOMADIK || ARCH_U8500) @@ -67,3 +70,8 @@ config CLKSRC_METAG_GENERIC def_bool y if METAG help This option enables support for the Meta per-thread timers. + +config CLKSRC_EXYNOS_MCT + def_bool y if ARCH_EXYNOS + help + Support for Multi Core Timer controller on Exynos SoCs. diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 682d48d08164..caacdb63aff9 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -23,6 +23,8 @@ obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o obj-$(CONFIG_ARCH_BCM) += bcm_kona_timer.o +obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o +obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c new file mode 100644 index 000000000000..685bc60e210a --- /dev/null +++ b/drivers/clocksource/cadence_ttc_timer.c @@ -0,0 +1,436 @@ +/* + * This file contains driver for the Cadence Triple Timer Counter Rev 06 + * + * Copyright (C) 2011-2013 Xilinx + * + * based on arch/mips/kernel/time.c timer driver + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/clockchips.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/slab.h> +#include <linux/clk-provider.h> + +/* + * This driver configures the 2 16-bit count-up timers as follows: + * + * T1: Timer 1, clocksource for generic timekeeping + * T2: Timer 2, clockevent source for hrtimers + * T3: Timer 3, <unused> + * + * The input frequency to the timer module for emulation is 2.5MHz which is + * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32, + * the timers are clocked at 78.125KHz (12.8 us resolution). + + * The input frequency to the timer module in silicon is configurable and + * obtained from device tree. The pre-scaler of 32 is used. + */ + +/* + * Timer Register Offset Definitions of Timer 1, Increment base address by 4 + * and use same offsets for Timer 2 + */ +#define TTC_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */ +#define TTC_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */ +#define TTC_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */ +#define TTC_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */ +#define TTC_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */ +#define TTC_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */ + +#define TTC_CNT_CNTRL_DISABLE_MASK 0x1 + +/* + * Setup the timers to use pre-scaling, using a fixed value for now that will + * work across most input frequency, but it may need to be more dynamic + */ +#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */ +#define PRESCALE 2048 /* The exponent must match this */ +#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1) +#define CLK_CNTRL_PRESCALE_EN 1 +#define CNT_CNTRL_RESET (1 << 4) + +/** + * struct ttc_timer - This definition defines local timer structure + * + * @base_addr: Base address of timer + * @clk: Associated clock source + * @clk_rate_change_nb Notifier block for clock rate changes + */ +struct ttc_timer { + void __iomem *base_addr; + struct clk *clk; + struct notifier_block clk_rate_change_nb; +}; + +#define to_ttc_timer(x) \ + container_of(x, struct ttc_timer, clk_rate_change_nb) + +struct ttc_timer_clocksource { + struct ttc_timer ttc; + struct clocksource cs; +}; + +#define to_ttc_timer_clksrc(x) \ + container_of(x, struct ttc_timer_clocksource, cs) + +struct ttc_timer_clockevent { + struct ttc_timer ttc; + struct clock_event_device ce; +}; + +#define to_ttc_timer_clkevent(x) \ + container_of(x, struct ttc_timer_clockevent, ce) + +/** + * ttc_set_interval - Set the timer interval value + * + * @timer: Pointer to the timer instance + * @cycles: Timer interval ticks + **/ +static void ttc_set_interval(struct ttc_timer *timer, + unsigned long cycles) +{ + u32 ctrl_reg; + + /* Disable the counter, set the counter value and re-enable counter */ + ctrl_reg = __raw_readl(timer->base_addr + TTC_CNT_CNTRL_OFFSET); + ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET); + + __raw_writel(cycles, timer->base_addr + TTC_INTR_VAL_OFFSET); + + /* + * Reset the counter (0x10) so that it starts from 0, one-shot + * mode makes this needed for timing to be right. + */ + ctrl_reg |= CNT_CNTRL_RESET; + ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET); +} + +/** + * ttc_clock_event_interrupt - Clock event timer interrupt handler + * + * @irq: IRQ number of the Timer + * @dev_id: void pointer to the ttc_timer instance + * + * returns: Always IRQ_HANDLED - success + **/ +static irqreturn_t ttc_clock_event_interrupt(int irq, void *dev_id) +{ + struct ttc_timer_clockevent *ttce = dev_id; + struct ttc_timer *timer = &ttce->ttc; + + /* Acknowledge the interrupt and call event handler */ + __raw_readl(timer->base_addr + TTC_ISR_OFFSET); + + ttce->ce.event_handler(&ttce->ce); + + return IRQ_HANDLED; +} + +/** + * __ttc_clocksource_read - Reads the timer counter register + * + * returns: Current timer counter register value + **/ +static cycle_t __ttc_clocksource_read(struct clocksource *cs) +{ + struct ttc_timer *timer = &to_ttc_timer_clksrc(cs)->ttc; + + return (cycle_t)__raw_readl(timer->base_addr + + TTC_COUNT_VAL_OFFSET); +} + +/** + * ttc_set_next_event - Sets the time interval for next event + * + * @cycles: Timer interval ticks + * @evt: Address of clock event instance + * + * returns: Always 0 - success + **/ +static int ttc_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt); + struct ttc_timer *timer = &ttce->ttc; + + ttc_set_interval(timer, cycles); + return 0; +} + +/** + * ttc_set_mode - Sets the mode of timer + * + * @mode: Mode to be set + * @evt: Address of clock event instance + **/ +static void ttc_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt); + struct ttc_timer *timer = &ttce->ttc; + u32 ctrl_reg; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + ttc_set_interval(timer, + DIV_ROUND_CLOSEST(clk_get_rate(ttce->ttc.clk), + PRESCALE * HZ)); + break; + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + ctrl_reg = __raw_readl(timer->base_addr + + TTC_CNT_CNTRL_OFFSET); + ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, + timer->base_addr + TTC_CNT_CNTRL_OFFSET); + break; + case CLOCK_EVT_MODE_RESUME: + ctrl_reg = __raw_readl(timer->base_addr + + TTC_CNT_CNTRL_OFFSET); + ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, + timer->base_addr + TTC_CNT_CNTRL_OFFSET); + break; + } +} + +static int ttc_rate_change_clocksource_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct clk_notifier_data *ndata = data; + struct ttc_timer *ttc = to_ttc_timer(nb); + struct ttc_timer_clocksource *ttccs = container_of(ttc, + struct ttc_timer_clocksource, ttc); + + switch (event) { + case POST_RATE_CHANGE: + /* + * Do whatever is necessary to maintain a proper time base + * + * I cannot find a way to adjust the currently used clocksource + * to the new frequency. __clocksource_updatefreq_hz() sounds + * good, but does not work. Not sure what's that missing. + * + * This approach works, but triggers two clocksource switches. + * The first after unregister to clocksource jiffies. And + * another one after the register to the newly registered timer. + * + * Alternatively we could 'waste' another HW timer to ping pong + * between clock sources. That would also use one register and + * one unregister call, but only trigger one clocksource switch + * for the cost of another HW timer used by the OS. + */ + clocksource_unregister(&ttccs->cs); + clocksource_register_hz(&ttccs->cs, + ndata->new_rate / PRESCALE); + /* fall through */ + case PRE_RATE_CHANGE: + case ABORT_RATE_CHANGE: + default: + return NOTIFY_DONE; + } +} + +static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base) +{ + struct ttc_timer_clocksource *ttccs; + int err; + + ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL); + if (WARN_ON(!ttccs)) + return; + + ttccs->ttc.clk = clk; + + err = clk_prepare_enable(ttccs->ttc.clk); + if (WARN_ON(err)) { + kfree(ttccs); + return; + } + + ttccs->ttc.clk_rate_change_nb.notifier_call = + ttc_rate_change_clocksource_cb; + ttccs->ttc.clk_rate_change_nb.next = NULL; + if (clk_notifier_register(ttccs->ttc.clk, + &ttccs->ttc.clk_rate_change_nb)) + pr_warn("Unable to register clock notifier.\n"); + + ttccs->ttc.base_addr = base; + ttccs->cs.name = "ttc_clocksource"; + ttccs->cs.rating = 200; + ttccs->cs.read = __ttc_clocksource_read; + ttccs->cs.mask = CLOCKSOURCE_MASK(16); + ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS; + + /* + * Setup the clock source counter to be an incrementing counter + * with no interrupt and it rolls over at 0xFFFF. Pre-scale + * it by 32 also. Let it start running now. + */ + __raw_writel(0x0, ttccs->ttc.base_addr + TTC_IER_OFFSET); + __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, + ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET); + __raw_writel(CNT_CNTRL_RESET, + ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET); + + err = clocksource_register_hz(&ttccs->cs, + clk_get_rate(ttccs->ttc.clk) / PRESCALE); + if (WARN_ON(err)) { + kfree(ttccs); + return; + } +} + +static int ttc_rate_change_clockevent_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct clk_notifier_data *ndata = data; + struct ttc_timer *ttc = to_ttc_timer(nb); + struct ttc_timer_clockevent *ttcce = container_of(ttc, + struct ttc_timer_clockevent, ttc); + + switch (event) { + case POST_RATE_CHANGE: + { + unsigned long flags; + + /* + * clockevents_update_freq should be called with IRQ disabled on + * the CPU the timer provides events for. The timer we use is + * common to both CPUs, not sure if we need to run on both + * cores. + */ + local_irq_save(flags); + clockevents_update_freq(&ttcce->ce, + ndata->new_rate / PRESCALE); + local_irq_restore(flags); + + /* fall through */ + } + case PRE_RATE_CHANGE: + case ABORT_RATE_CHANGE: + default: + return NOTIFY_DONE; + } +} + +static void __init ttc_setup_clockevent(struct clk *clk, + void __iomem *base, u32 irq) +{ + struct ttc_timer_clockevent *ttcce; + int err; + + ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL); + if (WARN_ON(!ttcce)) + return; + + ttcce->ttc.clk = clk; + + err = clk_prepare_enable(ttcce->ttc.clk); + if (WARN_ON(err)) { + kfree(ttcce); + return; + } + + ttcce->ttc.clk_rate_change_nb.notifier_call = + ttc_rate_change_clockevent_cb; + ttcce->ttc.clk_rate_change_nb.next = NULL; + if (clk_notifier_register(ttcce->ttc.clk, + &ttcce->ttc.clk_rate_change_nb)) + pr_warn("Unable to register clock notifier.\n"); + + ttcce->ttc.base_addr = base; + ttcce->ce.name = "ttc_clockevent"; + ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + ttcce->ce.set_next_event = ttc_set_next_event; + ttcce->ce.set_mode = ttc_set_mode; + ttcce->ce.rating = 200; + ttcce->ce.irq = irq; + ttcce->ce.cpumask = cpu_possible_mask; + + /* + * Setup the clock event timer to be an interval timer which + * is prescaled by 32 using the interval interrupt. Leave it + * disabled for now. + */ + __raw_writel(0x23, ttcce->ttc.base_addr + TTC_CNT_CNTRL_OFFSET); + __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, + ttcce->ttc.base_addr + TTC_CLK_CNTRL_OFFSET); + __raw_writel(0x1, ttcce->ttc.base_addr + TTC_IER_OFFSET); + + err = request_irq(irq, ttc_clock_event_interrupt, + IRQF_DISABLED | IRQF_TIMER, + ttcce->ce.name, ttcce); + if (WARN_ON(err)) { + kfree(ttcce); + return; + } + + clockevents_config_and_register(&ttcce->ce, + clk_get_rate(ttcce->ttc.clk) / PRESCALE, 1, 0xfffe); +} + +/** + * ttc_timer_init - Initialize the timer + * + * Initializes the timer hardware and register the clock source and clock event + * timers with Linux kernal timer framework + */ +static void __init ttc_timer_init(struct device_node *timer) +{ + unsigned int irq; + void __iomem *timer_baseaddr; + struct clk *clk; + static int initialized; + + if (initialized) + return; + + initialized = 1; + + /* + * Get the 1st Triple Timer Counter (TTC) block from the device tree + * and use it. Note that the event timer uses the interrupt and it's the + * 2nd TTC hence the irq_of_parse_and_map(,1) + */ + timer_baseaddr = of_iomap(timer, 0); + if (!timer_baseaddr) { + pr_err("ERROR: invalid timer base address\n"); + BUG(); + } + + irq = irq_of_parse_and_map(timer, 1); + if (irq <= 0) { + pr_err("ERROR: invalid interrupt number\n"); + BUG(); + } + + clk = of_clk_get_by_name(timer, "cpu_1x"); + if (IS_ERR(clk)) { + pr_err("ERROR: timer input clock not found\n"); + BUG(); + } + + ttc_setup_clocksource(clk, timer_baseaddr); + ttc_setup_clockevent(clk, timer_baseaddr + 4, irq); + + pr_info("%s #0 at %p, irq=%d\n", timer->name, timer_baseaddr, irq); +} + +CLOCKSOURCE_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init); diff --git a/drivers/clocksource/em_sti.c b/drivers/clocksource/em_sti.c index e6a553cb73e8..4329a29a5310 100644 --- a/drivers/clocksource/em_sti.c +++ b/drivers/clocksource/em_sti.c @@ -399,7 +399,18 @@ static struct platform_driver em_sti_device_driver = { } }; -module_platform_driver(em_sti_device_driver); +static int __init em_sti_init(void) +{ + return platform_driver_register(&em_sti_device_driver); +} + +static void __exit em_sti_exit(void) +{ + platform_driver_unregister(&em_sti_device_driver); +} + +subsys_initcall(em_sti_init); +module_exit(em_sti_exit); MODULE_AUTHOR("Magnus Damm"); MODULE_DESCRIPTION("Renesas Emma Mobile STI Timer Driver"); diff --git a/arch/arm/mach-exynos/mct.c b/drivers/clocksource/exynos_mct.c index c9d6650f9b5d..661026834b23 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -20,6 +20,9 @@ #include <linux/delay.h> #include <linux/percpu.h> #include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/clocksource.h> #include <asm/arch_timer.h> #include <asm/localtimer.h> @@ -28,9 +31,36 @@ #include <mach/map.h> #include <mach/irqs.h> -#include <mach/regs-mct.h> #include <asm/mach/time.h> +#define EXYNOS4_MCTREG(x) (x) +#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100) +#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104) +#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110) +#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200) +#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204) +#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208) +#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240) +#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244) +#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248) +#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C) +#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300) +#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x)) +#define EXYNOS4_MCT_L_MASK (0xffffff00) + +#define MCT_L_TCNTB_OFFSET (0x00) +#define MCT_L_ICNTB_OFFSET (0x08) +#define MCT_L_TCON_OFFSET (0x20) +#define MCT_L_INT_CSTAT_OFFSET (0x30) +#define MCT_L_INT_ENB_OFFSET (0x34) +#define MCT_L_WSTAT_OFFSET (0x40) +#define MCT_G_TCON_START (1 << 8) +#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1) +#define MCT_G_TCON_COMP0_ENABLE (1 << 0) +#define MCT_L_TCON_INTERVAL_MODE (1 << 2) +#define MCT_L_TCON_INT_START (1 << 1) +#define MCT_L_TCON_TIMER_START (1 << 0) + #define TICK_BASE_CNT 1 enum { @@ -38,64 +68,75 @@ enum { MCT_INT_PPI }; +enum { + MCT_G0_IRQ, + MCT_G1_IRQ, + MCT_G2_IRQ, + MCT_G3_IRQ, + MCT_L0_IRQ, + MCT_L1_IRQ, + MCT_L2_IRQ, + MCT_L3_IRQ, + MCT_NR_IRQS, +}; + +static void __iomem *reg_base; static unsigned long clk_rate; static unsigned int mct_int_type; +static int mct_irqs[MCT_NR_IRQS]; struct mct_clock_event_device { struct clock_event_device *evt; - void __iomem *base; + unsigned long base; char name[10]; }; -static void exynos4_mct_write(unsigned int value, void *addr) +static void exynos4_mct_write(unsigned int value, unsigned long offset) { - void __iomem *stat_addr; + unsigned long stat_addr; u32 mask; u32 i; - __raw_writel(value, addr); + __raw_writel(value, reg_base + offset); - if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) { - u32 base = (u32) addr & EXYNOS4_MCT_L_MASK; - switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) { - case (u32) MCT_L_TCON_OFFSET: - stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) { + stat_addr = (offset & ~EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET; + switch (offset & EXYNOS4_MCT_L_MASK) { + case MCT_L_TCON_OFFSET: mask = 1 << 3; /* L_TCON write status */ break; - case (u32) MCT_L_ICNTB_OFFSET: - stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + case MCT_L_ICNTB_OFFSET: mask = 1 << 1; /* L_ICNTB write status */ break; - case (u32) MCT_L_TCNTB_OFFSET: - stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET; + case MCT_L_TCNTB_OFFSET: mask = 1 << 0; /* L_TCNTB write status */ break; default: return; } } else { - switch ((u32) addr) { - case (u32) EXYNOS4_MCT_G_TCON: + switch (offset) { + case EXYNOS4_MCT_G_TCON: stat_addr = EXYNOS4_MCT_G_WSTAT; mask = 1 << 16; /* G_TCON write status */ break; - case (u32) EXYNOS4_MCT_G_COMP0_L: + case EXYNOS4_MCT_G_COMP0_L: stat_addr = EXYNOS4_MCT_G_WSTAT; mask = 1 << 0; /* G_COMP0_L write status */ break; - case (u32) EXYNOS4_MCT_G_COMP0_U: + case EXYNOS4_MCT_G_COMP0_U: stat_addr = EXYNOS4_MCT_G_WSTAT; mask = 1 << 1; /* G_COMP0_U write status */ break; - case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR: + case EXYNOS4_MCT_G_COMP0_ADD_INCR: stat_addr = EXYNOS4_MCT_G_WSTAT; mask = 1 << 2; /* G_COMP0_ADD_INCR w status */ break; - case (u32) EXYNOS4_MCT_G_CNT_L: + case EXYNOS4_MCT_G_CNT_L: stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; mask = 1 << 0; /* G_CNT_L write status */ break; - case (u32) EXYNOS4_MCT_G_CNT_U: + case EXYNOS4_MCT_G_CNT_U: stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; mask = 1 << 1; /* G_CNT_U write status */ break; @@ -106,12 +147,12 @@ static void exynos4_mct_write(unsigned int value, void *addr) /* Wait maximum 1 ms until written values are applied */ for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++) - if (__raw_readl(stat_addr) & mask) { - __raw_writel(mask, stat_addr); + if (__raw_readl(reg_base + stat_addr) & mask) { + __raw_writel(mask, reg_base + stat_addr); return; } - panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr); + panic("MCT hangs after writing %d (offset:0x%lx)\n", value, offset); } /* Clocksource handling */ @@ -122,7 +163,7 @@ static void exynos4_mct_frc_start(u32 hi, u32 lo) exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L); exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U); - reg = __raw_readl(EXYNOS4_MCT_G_TCON); + reg = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON); reg |= MCT_G_TCON_START; exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON); } @@ -130,12 +171,12 @@ static void exynos4_mct_frc_start(u32 hi, u32 lo) static cycle_t exynos4_frc_read(struct clocksource *cs) { unsigned int lo, hi; - u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U); + u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U); do { hi = hi2; - lo = __raw_readl(EXYNOS4_MCT_G_CNT_L); - hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U); + lo = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_L); + hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U); } while (hi != hi2); return ((cycle_t)hi << 32) | lo; @@ -167,7 +208,7 @@ static void exynos4_mct_comp0_stop(void) { unsigned int tcon; - tcon = __raw_readl(EXYNOS4_MCT_G_TCON); + tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON); tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC); exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON); @@ -180,7 +221,7 @@ static void exynos4_mct_comp0_start(enum clock_event_mode mode, unsigned int tcon; cycle_t comp_cycle; - tcon = __raw_readl(EXYNOS4_MCT_G_TCON); + tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON); if (mode == CLOCK_EVT_MODE_PERIODIC) { tcon |= MCT_G_TCON_COMP0_AUTO_INC; @@ -257,11 +298,7 @@ static void exynos4_clockevent_init(void) mct_comp_device.cpumask = cpumask_of(0); clockevents_config_and_register(&mct_comp_device, clk_rate, 0xf, 0xffffffff); - - if (soc_is_exynos5250()) - setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq); - else - setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq); + setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq); } #ifdef CONFIG_LOCAL_TIMERS @@ -273,12 +310,12 @@ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt) { unsigned long tmp; unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START; - void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET; + unsigned long offset = mevt->base + MCT_L_TCON_OFFSET; - tmp = __raw_readl(addr); + tmp = __raw_readl(reg_base + offset); if (tmp & mask) { tmp &= ~mask; - exynos4_mct_write(tmp, addr); + exynos4_mct_write(tmp, offset); } } @@ -297,7 +334,7 @@ static void exynos4_mct_tick_start(unsigned long cycles, /* enable MCT tick interrupt */ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET); - tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET); + tmp = __raw_readl(reg_base + mevt->base + MCT_L_TCON_OFFSET); tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START | MCT_L_TCON_INTERVAL_MODE; exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET); @@ -349,7 +386,7 @@ static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt) exynos4_mct_tick_stop(mevt); /* Clear the MCT tick interrupt */ - if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) { + if (__raw_readl(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) { exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); return 1; } else { @@ -385,7 +422,6 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt) { struct mct_clock_event_device *mevt; unsigned int cpu = smp_processor_id(); - int mct_lx_irq; mevt = this_cpu_ptr(&percpu_mct_tick); mevt->evt = evt; @@ -406,21 +442,17 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt) if (mct_int_type == MCT_INT_SPI) { if (cpu == 0) { - mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 : - EXYNOS5_IRQ_MCT_L0; mct_tick0_event_irq.dev_id = mevt; - evt->irq = mct_lx_irq; - setup_irq(mct_lx_irq, &mct_tick0_event_irq); + evt->irq = mct_irqs[MCT_L0_IRQ]; + setup_irq(evt->irq, &mct_tick0_event_irq); } else { - mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 : - EXYNOS5_IRQ_MCT_L1; mct_tick1_event_irq.dev_id = mevt; - evt->irq = mct_lx_irq; - setup_irq(mct_lx_irq, &mct_tick1_event_irq); - irq_set_affinity(mct_lx_irq, cpumask_of(1)); + evt->irq = mct_irqs[MCT_L1_IRQ]; + setup_irq(evt->irq, &mct_tick1_event_irq); + irq_set_affinity(evt->irq, cpumask_of(1)); } } else { - enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0); + enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0); } return 0; @@ -436,7 +468,7 @@ static void exynos4_local_timer_stop(struct clock_event_device *evt) else remove_irq(evt->irq, &mct_tick1_event_irq); else - disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER); + disable_percpu_irq(mct_irqs[MCT_L0_IRQ]); } static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = { @@ -445,41 +477,92 @@ static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = { }; #endif /* CONFIG_LOCAL_TIMERS */ -static void __init exynos4_timer_resources(void) +static void __init exynos4_timer_resources(struct device_node *np, void __iomem *base) { - struct clk *mct_clk; - mct_clk = clk_get(NULL, "xtal"); + struct clk *mct_clk, *tick_clk; + + tick_clk = np ? of_clk_get_by_name(np, "fin_pll") : + clk_get(NULL, "fin_pll"); + if (IS_ERR(tick_clk)) + panic("%s: unable to determine tick clock rate\n", __func__); + clk_rate = clk_get_rate(tick_clk); - clk_rate = clk_get_rate(mct_clk); + mct_clk = np ? of_clk_get_by_name(np, "mct") : clk_get(NULL, "mct"); + if (IS_ERR(mct_clk)) + panic("%s: unable to retrieve mct clock instance\n", __func__); + clk_prepare_enable(mct_clk); + + reg_base = base; + if (!reg_base) + panic("%s: unable to ioremap mct address space\n", __func__); #ifdef CONFIG_LOCAL_TIMERS if (mct_int_type == MCT_INT_PPI) { int err; - err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, + err = request_percpu_irq(mct_irqs[MCT_L0_IRQ], exynos4_mct_tick_isr, "MCT", &percpu_mct_tick); WARN(err, "MCT: can't request IRQ %d (%d)\n", - EXYNOS_IRQ_MCT_LOCALTIMER, err); + mct_irqs[MCT_L0_IRQ], err); } local_timer_register(&exynos4_mct_tick_ops); #endif /* CONFIG_LOCAL_TIMERS */ } -void __init exynos4_timer_init(void) +void __init mct_init(void) { - if (soc_is_exynos5440()) { - arch_timer_of_register(); - return; + if (soc_is_exynos4210()) { + mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0; + mct_irqs[MCT_L0_IRQ] = EXYNOS4_IRQ_MCT_L0; + mct_irqs[MCT_L1_IRQ] = EXYNOS4_IRQ_MCT_L1; + mct_int_type = MCT_INT_SPI; + } else { + panic("unable to determine mct controller type\n"); } - if ((soc_is_exynos4210()) || (soc_is_exynos5250())) - mct_int_type = MCT_INT_SPI; - else - mct_int_type = MCT_INT_PPI; + exynos4_timer_resources(NULL, S5P_VA_SYSTIMER); + exynos4_clocksource_init(); + exynos4_clockevent_init(); +} + +static void __init mct_init_dt(struct device_node *np, unsigned int int_type) +{ + u32 nr_irqs, i; + + mct_int_type = int_type; - exynos4_timer_resources(); + /* This driver uses only one global timer interrupt */ + mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ); + + /* + * Find out the number of local irqs specified. The local + * timer irqs are specified after the four global timer + * irqs are specified. + */ +#ifdef CONFIG_OF + nr_irqs = of_irq_count(np); +#else + nr_irqs = 0; +#endif + for (i = MCT_L0_IRQ; i < nr_irqs; i++) + mct_irqs[i] = irq_of_parse_and_map(np, i); + + exynos4_timer_resources(np, of_iomap(np, 0)); exynos4_clocksource_init(); exynos4_clockevent_init(); } + + +static void __init mct_init_spi(struct device_node *np) +{ + return mct_init_dt(np, MCT_INT_SPI); +} + +static void __init mct_init_ppi(struct device_node *np) +{ + return mct_init_dt(np, MCT_INT_PPI); +} +CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi); +CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi); diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 488c14cc8dbf..08d0c418c94a 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -54,62 +54,100 @@ struct sh_cmt_priv { struct clocksource cs; unsigned long total_cycles; bool cs_enabled; + + /* callbacks for CMSTR and CMCSR access */ + unsigned long (*read_control)(void __iomem *base, unsigned long offs); + void (*write_control)(void __iomem *base, unsigned long offs, + unsigned long value); + + /* callbacks for CMCNT and CMCOR access */ + unsigned long (*read_count)(void __iomem *base, unsigned long offs); + void (*write_count)(void __iomem *base, unsigned long offs, + unsigned long value); }; -static DEFINE_RAW_SPINLOCK(sh_cmt_lock); +/* Examples of supported CMT timer register layouts and I/O access widths: + * + * "16-bit counter and 16-bit control" as found on sh7263: + * CMSTR 0xfffec000 16-bit + * CMCSR 0xfffec002 16-bit + * CMCNT 0xfffec004 16-bit + * CMCOR 0xfffec006 16-bit + * + * "32-bit counter and 16-bit control" as found on sh7372, sh73a0, r8a7740: + * CMSTR 0xffca0000 16-bit + * CMCSR 0xffca0060 16-bit + * CMCNT 0xffca0064 32-bit + * CMCOR 0xffca0068 32-bit + */ + +static unsigned long sh_cmt_read16(void __iomem *base, unsigned long offs) +{ + return ioread16(base + (offs << 1)); +} + +static unsigned long sh_cmt_read32(void __iomem *base, unsigned long offs) +{ + return ioread32(base + (offs << 2)); +} + +static void sh_cmt_write16(void __iomem *base, unsigned long offs, + unsigned long value) +{ + iowrite16(value, base + (offs << 1)); +} + +static void sh_cmt_write32(void __iomem *base, unsigned long offs, + unsigned long value) +{ + iowrite32(value, base + (offs << 2)); +} -#define CMSTR -1 /* shared register */ #define CMCSR 0 /* channel register */ #define CMCNT 1 /* channel register */ #define CMCOR 2 /* channel register */ -static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr) +static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_priv *p) { struct sh_timer_config *cfg = p->pdev->dev.platform_data; - void __iomem *base = p->mapbase; - unsigned long offs; - - if (reg_nr == CMSTR) { - offs = 0; - base -= cfg->channel_offset; - } else - offs = reg_nr; - - if (p->width == 16) - offs <<= 1; - else { - offs <<= 2; - if ((reg_nr == CMCNT) || (reg_nr == CMCOR)) - return ioread32(base + offs); - } - return ioread16(base + offs); + return p->read_control(p->mapbase - cfg->channel_offset, 0); } -static inline void sh_cmt_write(struct sh_cmt_priv *p, int reg_nr, - unsigned long value) +static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_priv *p) +{ + return p->read_control(p->mapbase, CMCSR); +} + +static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_priv *p) +{ + return p->read_count(p->mapbase, CMCNT); +} + +static inline void sh_cmt_write_cmstr(struct sh_cmt_priv *p, + unsigned long value) { struct sh_timer_config *cfg = p->pdev->dev.platform_data; - void __iomem *base = p->mapbase; - unsigned long offs; - - if (reg_nr == CMSTR) { - offs = 0; - base -= cfg->channel_offset; - } else - offs = reg_nr; - - if (p->width == 16) - offs <<= 1; - else { - offs <<= 2; - if ((reg_nr == CMCNT) || (reg_nr == CMCOR)) { - iowrite32(value, base + offs); - return; - } - } - iowrite16(value, base + offs); + p->write_control(p->mapbase - cfg->channel_offset, 0, value); +} + +static inline void sh_cmt_write_cmcsr(struct sh_cmt_priv *p, + unsigned long value) +{ + p->write_control(p->mapbase, CMCSR, value); +} + +static inline void sh_cmt_write_cmcnt(struct sh_cmt_priv *p, + unsigned long value) +{ + p->write_count(p->mapbase, CMCNT, value); +} + +static inline void sh_cmt_write_cmcor(struct sh_cmt_priv *p, + unsigned long value) +{ + p->write_count(p->mapbase, CMCOR, value); } static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p, @@ -118,15 +156,15 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p, unsigned long v1, v2, v3; int o1, o2; - o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit; + o1 = sh_cmt_read_cmcsr(p) & p->overflow_bit; /* Make sure the timer value is stable. Stolen from acpi_pm.c */ do { o2 = o1; - v1 = sh_cmt_read(p, CMCNT); - v2 = sh_cmt_read(p, CMCNT); - v3 = sh_cmt_read(p, CMCNT); - o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit; + v1 = sh_cmt_read_cmcnt(p); + v2 = sh_cmt_read_cmcnt(p); + v3 = sh_cmt_read_cmcnt(p); + o1 = sh_cmt_read_cmcsr(p) & p->overflow_bit; } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2))); @@ -134,6 +172,7 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p, return v2; } +static DEFINE_RAW_SPINLOCK(sh_cmt_lock); static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) { @@ -142,14 +181,14 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) /* start stop register shared by multiple timer channels */ raw_spin_lock_irqsave(&sh_cmt_lock, flags); - value = sh_cmt_read(p, CMSTR); + value = sh_cmt_read_cmstr(p); if (start) value |= 1 << cfg->timer_bit; else value &= ~(1 << cfg->timer_bit); - sh_cmt_write(p, CMSTR, value); + sh_cmt_write_cmstr(p, value); raw_spin_unlock_irqrestore(&sh_cmt_lock, flags); } @@ -173,14 +212,14 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) /* configure channel, periodic mode and maximum timeout */ if (p->width == 16) { *rate = clk_get_rate(p->clk) / 512; - sh_cmt_write(p, CMCSR, 0x43); + sh_cmt_write_cmcsr(p, 0x43); } else { *rate = clk_get_rate(p->clk) / 8; - sh_cmt_write(p, CMCSR, 0x01a4); + sh_cmt_write_cmcsr(p, 0x01a4); } - sh_cmt_write(p, CMCOR, 0xffffffff); - sh_cmt_write(p, CMCNT, 0); + sh_cmt_write_cmcor(p, 0xffffffff); + sh_cmt_write_cmcnt(p, 0); /* * According to the sh73a0 user's manual, as CMCNT can be operated @@ -194,12 +233,12 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) * take RCLKx2 at maximum. */ for (k = 0; k < 100; k++) { - if (!sh_cmt_read(p, CMCNT)) + if (!sh_cmt_read_cmcnt(p)) break; udelay(1); } - if (sh_cmt_read(p, CMCNT)) { + if (sh_cmt_read_cmcnt(p)) { dev_err(&p->pdev->dev, "cannot clear CMCNT\n"); ret = -ETIMEDOUT; goto err1; @@ -222,7 +261,7 @@ static void sh_cmt_disable(struct sh_cmt_priv *p) sh_cmt_start_stop_ch(p, 0); /* disable interrupts in CMT block */ - sh_cmt_write(p, CMCSR, 0); + sh_cmt_write_cmcsr(p, 0); /* stop clock */ clk_disable(p->clk); @@ -270,7 +309,7 @@ static void sh_cmt_clock_event_program_verify(struct sh_cmt_priv *p, if (new_match > p->max_match_value) new_match = p->max_match_value; - sh_cmt_write(p, CMCOR, new_match); + sh_cmt_write_cmcor(p, new_match); now = sh_cmt_get_counter(p, &has_wrapped); if (has_wrapped && (new_match > p->match_value)) { @@ -346,7 +385,7 @@ static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id) struct sh_cmt_priv *p = dev_id; /* clear flags */ - sh_cmt_write(p, CMCSR, sh_cmt_read(p, CMCSR) & p->clear_bits); + sh_cmt_write_cmcsr(p, sh_cmt_read_cmcsr(p) & p->clear_bits); /* update clock source counter to begin with if enabled * the wrap flag should be cleared by the timer specific @@ -625,14 +664,6 @@ static int sh_cmt_register(struct sh_cmt_priv *p, char *name, unsigned long clockevent_rating, unsigned long clocksource_rating) { - if (p->width == (sizeof(p->max_match_value) * 8)) - p->max_match_value = ~0; - else - p->max_match_value = (1 << p->width) - 1; - - p->match_value = p->max_match_value; - raw_spin_lock_init(&p->lock); - if (clockevent_rating) sh_cmt_register_clockevent(p, name, clockevent_rating); @@ -657,8 +688,6 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) goto err0; } - platform_set_drvdata(pdev, p); - res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&p->pdev->dev, "failed to get I/O memory\n"); @@ -693,32 +722,51 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) goto err1; } + p->read_control = sh_cmt_read16; + p->write_control = sh_cmt_write16; + if (resource_size(res) == 6) { p->width = 16; + p->read_count = sh_cmt_read16; + p->write_count = sh_cmt_write16; p->overflow_bit = 0x80; p->clear_bits = ~0x80; } else { p->width = 32; + p->read_count = sh_cmt_read32; + p->write_count = sh_cmt_write32; p->overflow_bit = 0x8000; p->clear_bits = ~0xc000; } + if (p->width == (sizeof(p->max_match_value) * 8)) + p->max_match_value = ~0; + else + p->max_match_value = (1 << p->width) - 1; + + p->match_value = p->max_match_value; + raw_spin_lock_init(&p->lock); + ret = sh_cmt_register(p, (char *)dev_name(&p->pdev->dev), cfg->clockevent_rating, cfg->clocksource_rating); if (ret) { dev_err(&p->pdev->dev, "registration failed\n"); - goto err1; + goto err2; } p->cs_enabled = false; ret = setup_irq(irq, &p->irqaction); if (ret) { dev_err(&p->pdev->dev, "failed to request irq %d\n", irq); - goto err1; + goto err2; } + platform_set_drvdata(pdev, p); + return 0; +err2: + clk_put(p->clk); err1: iounmap(p->mapbase); @@ -751,7 +799,6 @@ static int sh_cmt_probe(struct platform_device *pdev) ret = sh_cmt_setup(p, pdev); if (ret) { kfree(p); - platform_set_drvdata(pdev, NULL); pm_runtime_idle(&pdev->dev); return ret; } @@ -791,7 +838,7 @@ static void __exit sh_cmt_exit(void) } early_platform_init("earlytimer", &sh_cmt_device_driver); -module_init(sh_cmt_init); +subsys_initcall(sh_cmt_init); module_exit(sh_cmt_exit); MODULE_AUTHOR("Magnus Damm"); diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index 83943e27cfac..4aac9ee0d0c0 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -386,7 +386,7 @@ static void __exit sh_mtu2_exit(void) } early_platform_init("earlytimer", &sh_mtu2_device_driver); -module_init(sh_mtu2_init); +subsys_initcall(sh_mtu2_init); module_exit(sh_mtu2_exit); MODULE_AUTHOR("Magnus Damm"); diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index b4502edce2a1..78b8dae49628 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -549,7 +549,7 @@ static void __exit sh_tmu_exit(void) } early_platform_init("earlytimer", &sh_tmu_device_driver); -module_init(sh_tmu_init); +subsys_initcall(sh_tmu_init); module_exit(sh_tmu_exit); MODULE_AUTHOR("Magnus Damm"); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 93aaadf99f28..b166e30b3bc4 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -227,12 +227,6 @@ config GPIO_TS5500 blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 LCD port. -config GPIO_VT8500 - bool "VIA/Wondermedia SoC GPIO Support" - depends on ARCH_VT8500 - help - Say yes here to support the VT8500/WM8505/WM8650 GPIO controller. - config GPIO_XILINX bool "Xilinx GPIO support" depends on PPC_OF || MICROBLAZE diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 22e07bc9fcb5..a274d7df3c8c 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -80,7 +80,6 @@ obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o obj-$(CONFIG_GPIO_VIPERBOARD) += gpio-viperboard.o obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o -obj-$(CONFIG_GPIO_VT8500) += gpio-vt8500.o obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index b3643ff007e4..99e0fa49fcbd 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -1122,8 +1122,12 @@ int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) #ifdef CONFIG_PLAT_S3C24XX static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset) { - if (offset < 4) - return IRQ_EINT0 + offset; + if (offset < 4) { + if (soc_is_s3c2412()) + return IRQ_EINT0_2412 + offset; + else + return IRQ_EINT0 + offset; + } if (offset < 8) return IRQ_EINT4 + offset - 4; @@ -3024,6 +3028,7 @@ static __init int samsung_gpiolib_init(void) static const struct of_device_id exynos_pinctrl_ids[] = { { .compatible = "samsung,exynos4210-pinctrl", }, { .compatible = "samsung,exynos4x12-pinctrl", }, + { .compatible = "samsung,exynos5250-pinctrl", }, { .compatible = "samsung,exynos5440-pinctrl", }, }; for_each_matching_node(pctrl_np, exynos_pinctrl_ids) diff --git a/drivers/gpio/gpio-vt8500.c b/drivers/gpio/gpio-vt8500.c deleted file mode 100644 index 81683ca35ac1..000000000000 --- a/drivers/gpio/gpio-vt8500.c +++ /dev/null @@ -1,355 +0,0 @@ -/* drivers/gpio/gpio-vt8500.c - * - * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * Based on arch/arm/mach-vt8500/gpio.c: - * - Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/module.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/bitops.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_device.h> - -/* - We handle GPIOs by bank, each bank containing up to 32 GPIOs covered - by one set of registers (although not all may be valid). - - Because different SoC's have different register offsets, we pass the - register offsets as data in vt8500_gpio_dt_ids[]. - - A value of NO_REG is used to indicate that this register is not - supported. Only used for ->en at the moment. -*/ - -#define NO_REG 0xFFFF - -/* - * struct vt8500_gpio_bank_regoffsets - * @en: offset to enable register of the bank - * @dir: offset to direction register of the bank - * @data_out: offset to the data out register of the bank - * @data_in: offset to the data in register of the bank - * @ngpio: highest valid pin in this bank - */ - -struct vt8500_gpio_bank_regoffsets { - unsigned int en; - unsigned int dir; - unsigned int data_out; - unsigned int data_in; - unsigned char ngpio; -}; - -struct vt8500_gpio_data { - unsigned int num_banks; - struct vt8500_gpio_bank_regoffsets banks[]; -}; - -#define VT8500_BANK(__en, __dir, __out, __in, __ngpio) \ -{ \ - .en = __en, \ - .dir = __dir, \ - .data_out = __out, \ - .data_in = __in, \ - .ngpio = __ngpio, \ -} - -static struct vt8500_gpio_data vt8500_data = { - .num_banks = 7, - .banks = { - VT8500_BANK(NO_REG, 0x3C, 0x5C, 0x7C, 9), - VT8500_BANK(0x00, 0x20, 0x40, 0x60, 26), - VT8500_BANK(0x04, 0x24, 0x44, 0x64, 28), - VT8500_BANK(0x08, 0x28, 0x48, 0x68, 31), - VT8500_BANK(0x0C, 0x2C, 0x4C, 0x6C, 19), - VT8500_BANK(0x10, 0x30, 0x50, 0x70, 19), - VT8500_BANK(0x14, 0x34, 0x54, 0x74, 23), - }, -}; - -static struct vt8500_gpio_data wm8505_data = { - .num_banks = 10, - .banks = { - VT8500_BANK(0x64, 0x8C, 0xB4, 0xDC, 22), - VT8500_BANK(0x40, 0x68, 0x90, 0xB8, 8), - VT8500_BANK(0x44, 0x6C, 0x94, 0xBC, 32), - VT8500_BANK(0x48, 0x70, 0x98, 0xC0, 6), - VT8500_BANK(0x4C, 0x74, 0x9C, 0xC4, 16), - VT8500_BANK(0x50, 0x78, 0xA0, 0xC8, 25), - VT8500_BANK(0x54, 0x7C, 0xA4, 0xCC, 5), - VT8500_BANK(0x58, 0x80, 0xA8, 0xD0, 5), - VT8500_BANK(0x5C, 0x84, 0xAC, 0xD4, 12), - VT8500_BANK(0x60, 0x88, 0xB0, 0xD8, 16), - VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6), - }, -}; - -/* - * No information about which bits are valid so we just make - * them all available until its figured out. - */ -static struct vt8500_gpio_data wm8650_data = { - .num_banks = 9, - .banks = { - VT8500_BANK(0x40, 0x80, 0xC0, 0x00, 32), - VT8500_BANK(0x44, 0x84, 0xC4, 0x04, 32), - VT8500_BANK(0x48, 0x88, 0xC8, 0x08, 32), - VT8500_BANK(0x4C, 0x8C, 0xCC, 0x0C, 32), - VT8500_BANK(0x50, 0x90, 0xD0, 0x10, 32), - VT8500_BANK(0x54, 0x94, 0xD4, 0x14, 32), - VT8500_BANK(0x58, 0x98, 0xD8, 0x18, 32), - VT8500_BANK(0x5C, 0x9C, 0xDC, 0x1C, 32), - VT8500_BANK(0x7C, 0xBC, 0xFC, 0x3C, 32), - VT8500_BANK(0x500, 0x504, 0x508, 0x50C, 6), - }, -}; - -struct vt8500_gpio_chip { - struct gpio_chip chip; - - const struct vt8500_gpio_bank_regoffsets *regs; - void __iomem *base; -}; - -struct vt8500_data { - struct vt8500_gpio_chip *chip; - void __iomem *iobase; - int num_banks; -}; - - -#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip) - -static int vt8500_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - u32 val; - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - - if (vt8500_chip->regs->en == NO_REG) - return 0; - - val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en); - val |= BIT(offset); - writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en); - - return 0; -} - -static void vt8500_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - u32 val; - - if (vt8500_chip->regs->en == NO_REG) - return; - - val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en); - val &= ~BIT(offset); - writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en); -} - -static int vt8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - - u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir); - val &= ~BIT(offset); - writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir); - - return 0; -} - -static int vt8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - - u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir); - val |= BIT(offset); - writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir); - - if (value) { - val = readl_relaxed(vt8500_chip->base + - vt8500_chip->regs->data_out); - val |= BIT(offset); - writel_relaxed(val, vt8500_chip->base + - vt8500_chip->regs->data_out); - } - return 0; -} - -static int vt8500_gpio_get_value(struct gpio_chip *chip, unsigned offset) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - - return (readl_relaxed(vt8500_chip->base + vt8500_chip->regs->data_in) >> - offset) & 1; -} - -static void vt8500_gpio_set_value(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - - u32 val = readl_relaxed(vt8500_chip->base + - vt8500_chip->regs->data_out); - if (value) - val |= BIT(offset); - else - val &= ~BIT(offset); - - writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->data_out); -} - -static int vt8500_of_xlate(struct gpio_chip *gc, - const struct of_phandle_args *gpiospec, u32 *flags) -{ - /* bank if specificed in gpiospec->args[0] */ - if (flags) - *flags = gpiospec->args[2]; - - return gpiospec->args[1]; -} - -static int vt8500_add_chips(struct platform_device *pdev, void __iomem *base, - const struct vt8500_gpio_data *data) -{ - struct vt8500_data *priv; - struct vt8500_gpio_chip *vtchip; - struct gpio_chip *chip; - int i; - int pin_cnt = 0; - - priv = devm_kzalloc(&pdev->dev, sizeof(struct vt8500_data), GFP_KERNEL); - if (!priv) { - dev_err(&pdev->dev, "failed to allocate memory\n"); - return -ENOMEM; - } - - priv->chip = devm_kzalloc(&pdev->dev, - sizeof(struct vt8500_gpio_chip) * data->num_banks, - GFP_KERNEL); - if (!priv->chip) { - dev_err(&pdev->dev, "failed to allocate chip memory\n"); - return -ENOMEM; - } - - priv->iobase = base; - priv->num_banks = data->num_banks; - platform_set_drvdata(pdev, priv); - - vtchip = priv->chip; - - for (i = 0; i < data->num_banks; i++) { - vtchip[i].base = base; - vtchip[i].regs = &data->banks[i]; - - chip = &vtchip[i].chip; - - chip->of_xlate = vt8500_of_xlate; - chip->of_gpio_n_cells = 3; - chip->of_node = pdev->dev.of_node; - - chip->request = vt8500_gpio_request; - chip->free = vt8500_gpio_free; - chip->direction_input = vt8500_gpio_direction_input; - chip->direction_output = vt8500_gpio_direction_output; - chip->get = vt8500_gpio_get_value; - chip->set = vt8500_gpio_set_value; - chip->can_sleep = 0; - chip->base = pin_cnt; - chip->ngpio = data->banks[i].ngpio; - - pin_cnt += data->banks[i].ngpio; - - gpiochip_add(chip); - } - return 0; -} - -static struct of_device_id vt8500_gpio_dt_ids[] = { - { .compatible = "via,vt8500-gpio", .data = &vt8500_data, }, - { .compatible = "wm,wm8505-gpio", .data = &wm8505_data, }, - { .compatible = "wm,wm8650-gpio", .data = &wm8650_data, }, - { /* Sentinel */ }, -}; - -static int vt8500_gpio_probe(struct platform_device *pdev) -{ - int ret; - void __iomem *gpio_base; - struct resource *res; - const struct of_device_id *of_id = - of_match_device(vt8500_gpio_dt_ids, &pdev->dev); - - if (!of_id) { - dev_err(&pdev->dev, "No matching driver data\n"); - return -ENODEV; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Unable to get IO resource\n"); - return -ENODEV; - } - - gpio_base = devm_request_and_ioremap(&pdev->dev, res); - if (!gpio_base) { - dev_err(&pdev->dev, "Unable to map GPIO registers\n"); - return -ENOMEM; - } - - ret = vt8500_add_chips(pdev, gpio_base, of_id->data); - - return ret; -} - -static int vt8500_gpio_remove(struct platform_device *pdev) -{ - int i; - int ret; - struct vt8500_data *priv = platform_get_drvdata(pdev); - struct vt8500_gpio_chip *vtchip = priv->chip; - - for (i = 0; i < priv->num_banks; i++) { - ret = gpiochip_remove(&vtchip[i].chip); - if (ret) - dev_warn(&pdev->dev, "gpiochip_remove returned %d\n", - ret); - } - - return 0; -} - -static struct platform_driver vt8500_gpio_driver = { - .probe = vt8500_gpio_probe, - .remove = vt8500_gpio_remove, - .driver = { - .name = "vt8500-gpio", - .owner = THIS_MODULE, - .of_match_table = vt8500_gpio_dt_ids, - }, -}; - -module_platform_driver(vt8500_gpio_driver); - -MODULE_DESCRIPTION("VT8500 GPIO Driver"); -MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); -MODULE_LICENSE("GPL v2"); -MODULE_DEVICE_TABLE(of, vt8500_gpio_dt_ids); diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index a350969e5efe..4a33351c25dc 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -25,6 +25,14 @@ config ARM_VIC_NR The maximum number of VICs available in the system, for power management. +config RENESAS_INTC_IRQPIN + bool + select IRQ_DOMAIN + +config RENESAS_IRQC + bool + select IRQ_DOMAIN + config VERSATILE_FPGA_IRQ bool select IRQ_DOMAIN diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 10ef57f35a6e..c28fcccf4a0d 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o obj-$(CONFIG_ARCH_MXS) += irq-mxs.o +obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o obj-$(CONFIG_METAG) += irq-metag-ext.o obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o obj-$(CONFIG_ARCH_SUNXI) += irq-sun4i.o @@ -10,4 +11,7 @@ obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o obj-$(CONFIG_ARM_GIC) += irq-gic.o obj-$(CONFIG_ARM_VIC) += irq-vic.o obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o +obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o +obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o +obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-combiner.c index 6a5201351507..02492ab20d22 100644 --- a/drivers/irqchip/exynos-combiner.c +++ b/drivers/irqchip/exynos-combiner.c @@ -32,6 +32,7 @@ struct combiner_chip_data { unsigned int irq_offset; unsigned int irq_mask; void __iomem *base; + unsigned int parent_irq; }; static struct irq_domain *combiner_irq_domain; @@ -88,22 +89,46 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) chained_irq_exit(chip, desc); } +#ifdef CONFIG_SMP +static int combiner_set_affinity(struct irq_data *d, + const struct cpumask *mask_val, bool force) +{ + struct combiner_chip_data *chip_data = irq_data_get_irq_chip_data(d); + struct irq_chip *chip = irq_get_chip(chip_data->parent_irq); + struct irq_data *data = irq_get_irq_data(chip_data->parent_irq); + + if (chip && chip->irq_set_affinity) + return chip->irq_set_affinity(data, mask_val, force); + else + return -EINVAL; +} +#endif + static struct irq_chip combiner_chip = { - .name = "COMBINER", - .irq_mask = combiner_mask_irq, - .irq_unmask = combiner_unmask_irq, + .name = "COMBINER", + .irq_mask = combiner_mask_irq, + .irq_unmask = combiner_unmask_irq, +#ifdef CONFIG_SMP + .irq_set_affinity = combiner_set_affinity, +#endif }; -static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq) +static unsigned int max_combiner_nr(void) { - unsigned int max_nr; - if (soc_is_exynos5250()) - max_nr = EXYNOS5_MAX_COMBINER_NR; + return EXYNOS5_MAX_COMBINER_NR; + else if (soc_is_exynos4412()) + return EXYNOS4412_MAX_COMBINER_NR; + else if (soc_is_exynos4212()) + return EXYNOS4212_MAX_COMBINER_NR; else - max_nr = EXYNOS4_MAX_COMBINER_NR; + return EXYNOS4210_MAX_COMBINER_NR; +} - if (combiner_nr >= max_nr) +static void __init combiner_cascade_irq(unsigned int combiner_nr, + unsigned int irq) +{ + if (combiner_nr >= max_combiner_nr()) BUG(); if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0) BUG(); @@ -111,12 +136,13 @@ static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int i } static void __init combiner_init_one(unsigned int combiner_nr, - void __iomem *base) + void __iomem *base, unsigned int irq) { combiner_data[combiner_nr].base = base; combiner_data[combiner_nr].irq_offset = irq_find_mapping( combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER); combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3); + combiner_data[combiner_nr].parent_irq = irq; /* Disable all interrupts */ __raw_writel(combiner_data[combiner_nr].irq_mask, @@ -167,23 +193,38 @@ static struct irq_domain_ops combiner_irq_domain_ops = { .map = combiner_irq_domain_map, }; +static unsigned int exynos4x12_combiner_extra_irq(int group) +{ + switch (group) { + case 16: + return IRQ_SPI(107); + case 17: + return IRQ_SPI(108); + case 18: + return IRQ_SPI(48); + case 19: + return IRQ_SPI(42); + default: + return 0; + } +} + void __init combiner_init(void __iomem *combiner_base, struct device_node *np) { int i, irq, irq_base; unsigned int max_nr, nr_irq; + max_nr = max_combiner_nr(); + if (np) { if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) { - pr_warning("%s: number of combiners not specified, " + pr_info("%s: number of combiners not specified, " "setting default as %d.\n", - __func__, EXYNOS4_MAX_COMBINER_NR); - max_nr = EXYNOS4_MAX_COMBINER_NR; + __func__, max_nr); } - } else { - max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR : - EXYNOS4_MAX_COMBINER_NR; } + nr_irq = max_nr * MAX_IRQ_IN_COMBINER; irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0); @@ -200,12 +241,15 @@ void __init combiner_init(void __iomem *combiner_base, } for (i = 0; i < max_nr; i++) { - combiner_init_one(i, combiner_base + (i >> 2) * 0x10); - irq = IRQ_SPI(i); + if (i < EXYNOS4210_MAX_COMBINER_NR || soc_is_exynos5250()) + irq = IRQ_SPI(i); + else + irq = exynos4x12_combiner_extra_irq(i); #ifdef CONFIG_OF if (np) irq = irq_of_parse_and_map(np, i); #endif + combiner_init_one(i, combiner_base + (i >> 2) * 0x10, irq); combiner_cascade_irq(i, irq); } } diff --git a/drivers/irqchip/irq-renesas-intc-irqpin.c b/drivers/irqchip/irq-renesas-intc-irqpin.c new file mode 100644 index 000000000000..5a68e5accec1 --- /dev/null +++ b/drivers/irqchip/irq-renesas-intc-irqpin.c @@ -0,0 +1,547 @@ +/* + * Renesas INTC External IRQ Pin Driver + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/platform_data/irq-renesas-intc-irqpin.h> + +#define INTC_IRQPIN_MAX 8 /* maximum 8 interrupts per driver instance */ + +#define INTC_IRQPIN_REG_SENSE 0 /* ICRn */ +#define INTC_IRQPIN_REG_PRIO 1 /* INTPRInn */ +#define INTC_IRQPIN_REG_SOURCE 2 /* INTREQnn */ +#define INTC_IRQPIN_REG_MASK 3 /* INTMSKnn */ +#define INTC_IRQPIN_REG_CLEAR 4 /* INTMSKCLRnn */ +#define INTC_IRQPIN_REG_NR 5 + +/* INTC external IRQ PIN hardware register access: + * + * SENSE is read-write 32-bit with 2-bits or 4-bits per IRQ (*) + * PRIO is read-write 32-bit with 4-bits per IRQ (**) + * SOURCE is read-only 32-bit or 8-bit with 1-bit per IRQ (***) + * MASK is write-only 32-bit or 8-bit with 1-bit per IRQ (***) + * CLEAR is write-only 32-bit or 8-bit with 1-bit per IRQ (***) + * + * (*) May be accessed by more than one driver instance - lock needed + * (**) Read-modify-write access by one driver instance - lock needed + * (***) Accessed by one driver instance only - no locking needed + */ + +struct intc_irqpin_iomem { + void __iomem *iomem; + unsigned long (*read)(void __iomem *iomem); + void (*write)(void __iomem *iomem, unsigned long data); + int width; +}; + +struct intc_irqpin_irq { + int hw_irq; + int requested_irq; + int domain_irq; + struct intc_irqpin_priv *p; +}; + +struct intc_irqpin_priv { + struct intc_irqpin_iomem iomem[INTC_IRQPIN_REG_NR]; + struct intc_irqpin_irq irq[INTC_IRQPIN_MAX]; + struct renesas_intc_irqpin_config config; + unsigned int number_of_irqs; + struct platform_device *pdev; + struct irq_chip irq_chip; + struct irq_domain *irq_domain; + bool shared_irqs; + u8 shared_irq_mask; +}; + +static unsigned long intc_irqpin_read32(void __iomem *iomem) +{ + return ioread32(iomem); +} + +static unsigned long intc_irqpin_read8(void __iomem *iomem) +{ + return ioread8(iomem); +} + +static void intc_irqpin_write32(void __iomem *iomem, unsigned long data) +{ + iowrite32(data, iomem); +} + +static void intc_irqpin_write8(void __iomem *iomem, unsigned long data) +{ + iowrite8(data, iomem); +} + +static inline unsigned long intc_irqpin_read(struct intc_irqpin_priv *p, + int reg) +{ + struct intc_irqpin_iomem *i = &p->iomem[reg]; + + return i->read(i->iomem); +} + +static inline void intc_irqpin_write(struct intc_irqpin_priv *p, + int reg, unsigned long data) +{ + struct intc_irqpin_iomem *i = &p->iomem[reg]; + + i->write(i->iomem, data); +} + +static inline unsigned long intc_irqpin_hwirq_mask(struct intc_irqpin_priv *p, + int reg, int hw_irq) +{ + return BIT((p->iomem[reg].width - 1) - hw_irq); +} + +static inline void intc_irqpin_irq_write_hwirq(struct intc_irqpin_priv *p, + int reg, int hw_irq) +{ + intc_irqpin_write(p, reg, intc_irqpin_hwirq_mask(p, reg, hw_irq)); +} + +static DEFINE_RAW_SPINLOCK(intc_irqpin_lock); /* only used by slow path */ + +static void intc_irqpin_read_modify_write(struct intc_irqpin_priv *p, + int reg, int shift, + int width, int value) +{ + unsigned long flags; + unsigned long tmp; + + raw_spin_lock_irqsave(&intc_irqpin_lock, flags); + + tmp = intc_irqpin_read(p, reg); + tmp &= ~(((1 << width) - 1) << shift); + tmp |= value << shift; + intc_irqpin_write(p, reg, tmp); + + raw_spin_unlock_irqrestore(&intc_irqpin_lock, flags); +} + +static void intc_irqpin_mask_unmask_prio(struct intc_irqpin_priv *p, + int irq, int do_mask) +{ + int bitfield_width = 4; /* PRIO assumed to have fixed bitfield width */ + int shift = (7 - irq) * bitfield_width; /* PRIO assumed to be 32-bit */ + + intc_irqpin_read_modify_write(p, INTC_IRQPIN_REG_PRIO, + shift, bitfield_width, + do_mask ? 0 : (1 << bitfield_width) - 1); +} + +static int intc_irqpin_set_sense(struct intc_irqpin_priv *p, int irq, int value) +{ + int bitfield_width = p->config.sense_bitfield_width; + int shift = (7 - irq) * bitfield_width; /* SENSE assumed to be 32-bit */ + + dev_dbg(&p->pdev->dev, "sense irq = %d, mode = %d\n", irq, value); + + if (value >= (1 << bitfield_width)) + return -EINVAL; + + intc_irqpin_read_modify_write(p, INTC_IRQPIN_REG_SENSE, shift, + bitfield_width, value); + return 0; +} + +static void intc_irqpin_dbg(struct intc_irqpin_irq *i, char *str) +{ + dev_dbg(&i->p->pdev->dev, "%s (%d:%d:%d)\n", + str, i->requested_irq, i->hw_irq, i->domain_irq); +} + +static void intc_irqpin_irq_enable(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + intc_irqpin_dbg(&p->irq[hw_irq], "enable"); + intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_CLEAR, hw_irq); +} + +static void intc_irqpin_irq_disable(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + intc_irqpin_dbg(&p->irq[hw_irq], "disable"); + intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_MASK, hw_irq); +} + +static void intc_irqpin_shared_irq_enable(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + intc_irqpin_dbg(&p->irq[hw_irq], "shared enable"); + intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_CLEAR, hw_irq); + + p->shared_irq_mask &= ~BIT(hw_irq); +} + +static void intc_irqpin_shared_irq_disable(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + intc_irqpin_dbg(&p->irq[hw_irq], "shared disable"); + intc_irqpin_irq_write_hwirq(p, INTC_IRQPIN_REG_MASK, hw_irq); + + p->shared_irq_mask |= BIT(hw_irq); +} + +static void intc_irqpin_irq_enable_force(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int irq = p->irq[irqd_to_hwirq(d)].requested_irq; + + intc_irqpin_irq_enable(d); + + /* enable interrupt through parent interrupt controller, + * assumes non-shared interrupt with 1:1 mapping + * needed for busted IRQs on some SoCs like sh73a0 + */ + irq_get_chip(irq)->irq_unmask(irq_get_irq_data(irq)); +} + +static void intc_irqpin_irq_disable_force(struct irq_data *d) +{ + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + int irq = p->irq[irqd_to_hwirq(d)].requested_irq; + + /* disable interrupt through parent interrupt controller, + * assumes non-shared interrupt with 1:1 mapping + * needed for busted IRQs on some SoCs like sh73a0 + */ + irq_get_chip(irq)->irq_mask(irq_get_irq_data(irq)); + intc_irqpin_irq_disable(d); +} + +#define INTC_IRQ_SENSE_VALID 0x10 +#define INTC_IRQ_SENSE(x) (x + INTC_IRQ_SENSE_VALID) + +static unsigned char intc_irqpin_sense[IRQ_TYPE_SENSE_MASK + 1] = { + [IRQ_TYPE_EDGE_FALLING] = INTC_IRQ_SENSE(0x00), + [IRQ_TYPE_EDGE_RISING] = INTC_IRQ_SENSE(0x01), + [IRQ_TYPE_LEVEL_LOW] = INTC_IRQ_SENSE(0x02), + [IRQ_TYPE_LEVEL_HIGH] = INTC_IRQ_SENSE(0x03), + [IRQ_TYPE_EDGE_BOTH] = INTC_IRQ_SENSE(0x04), +}; + +static int intc_irqpin_irq_set_type(struct irq_data *d, unsigned int type) +{ + unsigned char value = intc_irqpin_sense[type & IRQ_TYPE_SENSE_MASK]; + struct intc_irqpin_priv *p = irq_data_get_irq_chip_data(d); + + if (!(value & INTC_IRQ_SENSE_VALID)) + return -EINVAL; + + return intc_irqpin_set_sense(p, irqd_to_hwirq(d), + value ^ INTC_IRQ_SENSE_VALID); +} + +static irqreturn_t intc_irqpin_irq_handler(int irq, void *dev_id) +{ + struct intc_irqpin_irq *i = dev_id; + struct intc_irqpin_priv *p = i->p; + unsigned long bit; + + intc_irqpin_dbg(i, "demux1"); + bit = intc_irqpin_hwirq_mask(p, INTC_IRQPIN_REG_SOURCE, i->hw_irq); + + if (intc_irqpin_read(p, INTC_IRQPIN_REG_SOURCE) & bit) { + intc_irqpin_write(p, INTC_IRQPIN_REG_SOURCE, ~bit); + intc_irqpin_dbg(i, "demux2"); + generic_handle_irq(i->domain_irq); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static irqreturn_t intc_irqpin_shared_irq_handler(int irq, void *dev_id) +{ + struct intc_irqpin_priv *p = dev_id; + unsigned int reg_source = intc_irqpin_read(p, INTC_IRQPIN_REG_SOURCE); + irqreturn_t status = IRQ_NONE; + int k; + + for (k = 0; k < 8; k++) { + if (reg_source & BIT(7 - k)) { + if (BIT(k) & p->shared_irq_mask) + continue; + + status |= intc_irqpin_irq_handler(irq, &p->irq[k]); + } + } + + return status; +} + +static int intc_irqpin_irq_domain_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct intc_irqpin_priv *p = h->host_data; + + p->irq[hw].domain_irq = virq; + p->irq[hw].hw_irq = hw; + + intc_irqpin_dbg(&p->irq[hw], "map"); + irq_set_chip_data(virq, h->host_data); + irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq); + set_irq_flags(virq, IRQF_VALID); /* kill me now */ + return 0; +} + +static struct irq_domain_ops intc_irqpin_irq_domain_ops = { + .map = intc_irqpin_irq_domain_map, + .xlate = irq_domain_xlate_twocell, +}; + +static int intc_irqpin_probe(struct platform_device *pdev) +{ + struct renesas_intc_irqpin_config *pdata = pdev->dev.platform_data; + struct intc_irqpin_priv *p; + struct intc_irqpin_iomem *i; + struct resource *io[INTC_IRQPIN_REG_NR]; + struct resource *irq; + struct irq_chip *irq_chip; + void (*enable_fn)(struct irq_data *d); + void (*disable_fn)(struct irq_data *d); + const char *name = dev_name(&pdev->dev); + int ref_irq; + int ret; + int k; + + p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); + if (!p) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + ret = -ENOMEM; + goto err0; + } + + /* deal with driver instance configuration */ + if (pdata) + memcpy(&p->config, pdata, sizeof(*pdata)); + if (!p->config.sense_bitfield_width) + p->config.sense_bitfield_width = 4; /* default to 4 bits */ + + p->pdev = pdev; + platform_set_drvdata(pdev, p); + + /* get hold of manadatory IOMEM */ + for (k = 0; k < INTC_IRQPIN_REG_NR; k++) { + io[k] = platform_get_resource(pdev, IORESOURCE_MEM, k); + if (!io[k]) { + dev_err(&pdev->dev, "not enough IOMEM resources\n"); + ret = -EINVAL; + goto err0; + } + } + + /* allow any number of IRQs between 1 and INTC_IRQPIN_MAX */ + for (k = 0; k < INTC_IRQPIN_MAX; k++) { + irq = platform_get_resource(pdev, IORESOURCE_IRQ, k); + if (!irq) + break; + + p->irq[k].p = p; + p->irq[k].requested_irq = irq->start; + } + + p->number_of_irqs = k; + if (p->number_of_irqs < 1) { + dev_err(&pdev->dev, "not enough IRQ resources\n"); + ret = -EINVAL; + goto err0; + } + + /* ioremap IOMEM and setup read/write callbacks */ + for (k = 0; k < INTC_IRQPIN_REG_NR; k++) { + i = &p->iomem[k]; + + switch (resource_size(io[k])) { + case 1: + i->width = 8; + i->read = intc_irqpin_read8; + i->write = intc_irqpin_write8; + break; + case 4: + i->width = 32; + i->read = intc_irqpin_read32; + i->write = intc_irqpin_write32; + break; + default: + dev_err(&pdev->dev, "IOMEM size mismatch\n"); + ret = -EINVAL; + goto err0; + } + + i->iomem = devm_ioremap_nocache(&pdev->dev, io[k]->start, + resource_size(io[k])); + if (!i->iomem) { + dev_err(&pdev->dev, "failed to remap IOMEM\n"); + ret = -ENXIO; + goto err0; + } + } + + /* mask all interrupts using priority */ + for (k = 0; k < p->number_of_irqs; k++) + intc_irqpin_mask_unmask_prio(p, k, 1); + + /* clear all pending interrupts */ + intc_irqpin_write(p, INTC_IRQPIN_REG_SOURCE, 0x0); + + /* scan for shared interrupt lines */ + ref_irq = p->irq[0].requested_irq; + p->shared_irqs = true; + for (k = 1; k < p->number_of_irqs; k++) { + if (ref_irq != p->irq[k].requested_irq) { + p->shared_irqs = false; + break; + } + } + + /* use more severe masking method if requested */ + if (p->config.control_parent) { + enable_fn = intc_irqpin_irq_enable_force; + disable_fn = intc_irqpin_irq_disable_force; + } else if (!p->shared_irqs) { + enable_fn = intc_irqpin_irq_enable; + disable_fn = intc_irqpin_irq_disable; + } else { + enable_fn = intc_irqpin_shared_irq_enable; + disable_fn = intc_irqpin_shared_irq_disable; + } + + irq_chip = &p->irq_chip; + irq_chip->name = name; + irq_chip->irq_mask = disable_fn; + irq_chip->irq_unmask = enable_fn; + irq_chip->irq_enable = enable_fn; + irq_chip->irq_disable = disable_fn; + irq_chip->irq_set_type = intc_irqpin_irq_set_type; + irq_chip->flags = IRQCHIP_SKIP_SET_WAKE; + + p->irq_domain = irq_domain_add_simple(pdev->dev.of_node, + p->number_of_irqs, + p->config.irq_base, + &intc_irqpin_irq_domain_ops, p); + if (!p->irq_domain) { + ret = -ENXIO; + dev_err(&pdev->dev, "cannot initialize irq domain\n"); + goto err0; + } + + if (p->shared_irqs) { + /* request one shared interrupt */ + if (devm_request_irq(&pdev->dev, p->irq[0].requested_irq, + intc_irqpin_shared_irq_handler, + IRQF_SHARED, name, p)) { + dev_err(&pdev->dev, "failed to request low IRQ\n"); + ret = -ENOENT; + goto err1; + } + } else { + /* request interrupts one by one */ + for (k = 0; k < p->number_of_irqs; k++) { + if (devm_request_irq(&pdev->dev, + p->irq[k].requested_irq, + intc_irqpin_irq_handler, + 0, name, &p->irq[k])) { + dev_err(&pdev->dev, + "failed to request low IRQ\n"); + ret = -ENOENT; + goto err1; + } + } + } + + /* unmask all interrupts on prio level */ + for (k = 0; k < p->number_of_irqs; k++) + intc_irqpin_mask_unmask_prio(p, k, 0); + + dev_info(&pdev->dev, "driving %d irqs\n", p->number_of_irqs); + + /* warn in case of mismatch if irq base is specified */ + if (p->config.irq_base) { + if (p->config.irq_base != p->irq[0].domain_irq) + dev_warn(&pdev->dev, "irq base mismatch (%d/%d)\n", + p->config.irq_base, p->irq[0].domain_irq); + } + + return 0; + +err1: + irq_domain_remove(p->irq_domain); +err0: + return ret; +} + +static int intc_irqpin_remove(struct platform_device *pdev) +{ + struct intc_irqpin_priv *p = platform_get_drvdata(pdev); + + irq_domain_remove(p->irq_domain); + + return 0; +} + +static const struct of_device_id intc_irqpin_dt_ids[] = { + { .compatible = "renesas,intc-irqpin", }, + {}, +}; +MODULE_DEVICE_TABLE(of, intc_irqpin_dt_ids); + +static struct platform_driver intc_irqpin_device_driver = { + .probe = intc_irqpin_probe, + .remove = intc_irqpin_remove, + .driver = { + .name = "renesas_intc_irqpin", + .of_match_table = intc_irqpin_dt_ids, + .owner = THIS_MODULE, + } +}; + +static int __init intc_irqpin_init(void) +{ + return platform_driver_register(&intc_irqpin_device_driver); +} +postcore_initcall(intc_irqpin_init); + +static void __exit intc_irqpin_exit(void) +{ + platform_driver_unregister(&intc_irqpin_device_driver); +} +module_exit(intc_irqpin_exit); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("Renesas INTC External IRQ Pin Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/irqchip/irq-renesas-irqc.c b/drivers/irqchip/irq-renesas-irqc.c new file mode 100644 index 000000000000..927bff373aac --- /dev/null +++ b/drivers/irqchip/irq-renesas-irqc.c @@ -0,0 +1,307 @@ +/* + * Renesas IRQC Driver + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/platform_data/irq-renesas-irqc.h> + +#define IRQC_IRQ_MAX 32 /* maximum 32 interrupts per driver instance */ + +#define IRQC_REQ_STS 0x00 +#define IRQC_EN_STS 0x04 +#define IRQC_EN_SET 0x08 +#define IRQC_INT_CPU_BASE(n) (0x000 + ((n) * 0x10)) +#define DETECT_STATUS 0x100 +#define IRQC_CONFIG(n) (0x180 + ((n) * 0x04)) + +struct irqc_irq { + int hw_irq; + int requested_irq; + int domain_irq; + struct irqc_priv *p; +}; + +struct irqc_priv { + void __iomem *iomem; + void __iomem *cpu_int_base; + struct irqc_irq irq[IRQC_IRQ_MAX]; + struct renesas_irqc_config config; + unsigned int number_of_irqs; + struct platform_device *pdev; + struct irq_chip irq_chip; + struct irq_domain *irq_domain; +}; + +static void irqc_dbg(struct irqc_irq *i, char *str) +{ + dev_dbg(&i->p->pdev->dev, "%s (%d:%d:%d)\n", + str, i->requested_irq, i->hw_irq, i->domain_irq); +} + +static void irqc_irq_enable(struct irq_data *d) +{ + struct irqc_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + irqc_dbg(&p->irq[hw_irq], "enable"); + iowrite32(BIT(hw_irq), p->cpu_int_base + IRQC_EN_SET); +} + +static void irqc_irq_disable(struct irq_data *d) +{ + struct irqc_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + + irqc_dbg(&p->irq[hw_irq], "disable"); + iowrite32(BIT(hw_irq), p->cpu_int_base + IRQC_EN_STS); +} + +#define INTC_IRQ_SENSE_VALID 0x10 +#define INTC_IRQ_SENSE(x) (x + INTC_IRQ_SENSE_VALID) + +static unsigned char irqc_sense[IRQ_TYPE_SENSE_MASK + 1] = { + [IRQ_TYPE_LEVEL_LOW] = INTC_IRQ_SENSE(0x01), + [IRQ_TYPE_LEVEL_HIGH] = INTC_IRQ_SENSE(0x02), + [IRQ_TYPE_EDGE_FALLING] = INTC_IRQ_SENSE(0x04), /* Synchronous */ + [IRQ_TYPE_EDGE_RISING] = INTC_IRQ_SENSE(0x08), /* Synchronous */ + [IRQ_TYPE_EDGE_BOTH] = INTC_IRQ_SENSE(0x0c), /* Synchronous */ +}; + +static int irqc_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct irqc_priv *p = irq_data_get_irq_chip_data(d); + int hw_irq = irqd_to_hwirq(d); + unsigned char value = irqc_sense[type & IRQ_TYPE_SENSE_MASK]; + unsigned long tmp; + + irqc_dbg(&p->irq[hw_irq], "sense"); + + if (!(value & INTC_IRQ_SENSE_VALID)) + return -EINVAL; + + tmp = ioread32(p->iomem + IRQC_CONFIG(hw_irq)); + tmp &= ~0x3f; + tmp |= value ^ INTC_IRQ_SENSE_VALID; + iowrite32(tmp, p->iomem + IRQC_CONFIG(hw_irq)); + return 0; +} + +static irqreturn_t irqc_irq_handler(int irq, void *dev_id) +{ + struct irqc_irq *i = dev_id; + struct irqc_priv *p = i->p; + unsigned long bit = BIT(i->hw_irq); + + irqc_dbg(i, "demux1"); + + if (ioread32(p->iomem + DETECT_STATUS) & bit) { + iowrite32(bit, p->iomem + DETECT_STATUS); + irqc_dbg(i, "demux2"); + generic_handle_irq(i->domain_irq); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static int irqc_irq_domain_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct irqc_priv *p = h->host_data; + + p->irq[hw].domain_irq = virq; + p->irq[hw].hw_irq = hw; + + irqc_dbg(&p->irq[hw], "map"); + irq_set_chip_data(virq, h->host_data); + irq_set_chip_and_handler(virq, &p->irq_chip, handle_level_irq); + set_irq_flags(virq, IRQF_VALID); /* kill me now */ + return 0; +} + +static struct irq_domain_ops irqc_irq_domain_ops = { + .map = irqc_irq_domain_map, + .xlate = irq_domain_xlate_twocell, +}; + +static int irqc_probe(struct platform_device *pdev) +{ + struct renesas_irqc_config *pdata = pdev->dev.platform_data; + struct irqc_priv *p; + struct resource *io; + struct resource *irq; + struct irq_chip *irq_chip; + const char *name = dev_name(&pdev->dev); + int ret; + int k; + + p = kzalloc(sizeof(*p), GFP_KERNEL); + if (!p) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + ret = -ENOMEM; + goto err0; + } + + /* deal with driver instance configuration */ + if (pdata) + memcpy(&p->config, pdata, sizeof(*pdata)); + + p->pdev = pdev; + platform_set_drvdata(pdev, p); + + /* get hold of manadatory IOMEM */ + io = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!io) { + dev_err(&pdev->dev, "not enough IOMEM resources\n"); + ret = -EINVAL; + goto err1; + } + + /* allow any number of IRQs between 1 and IRQC_IRQ_MAX */ + for (k = 0; k < IRQC_IRQ_MAX; k++) { + irq = platform_get_resource(pdev, IORESOURCE_IRQ, k); + if (!irq) + break; + + p->irq[k].p = p; + p->irq[k].requested_irq = irq->start; + } + + p->number_of_irqs = k; + if (p->number_of_irqs < 1) { + dev_err(&pdev->dev, "not enough IRQ resources\n"); + ret = -EINVAL; + goto err1; + } + + /* ioremap IOMEM and setup read/write callbacks */ + p->iomem = ioremap_nocache(io->start, resource_size(io)); + if (!p->iomem) { + dev_err(&pdev->dev, "failed to remap IOMEM\n"); + ret = -ENXIO; + goto err2; + } + + p->cpu_int_base = p->iomem + IRQC_INT_CPU_BASE(0); /* SYS-SPI */ + + irq_chip = &p->irq_chip; + irq_chip->name = name; + irq_chip->irq_mask = irqc_irq_disable; + irq_chip->irq_unmask = irqc_irq_enable; + irq_chip->irq_enable = irqc_irq_enable; + irq_chip->irq_disable = irqc_irq_disable; + irq_chip->irq_set_type = irqc_irq_set_type; + irq_chip->flags = IRQCHIP_SKIP_SET_WAKE; + + p->irq_domain = irq_domain_add_simple(pdev->dev.of_node, + p->number_of_irqs, + p->config.irq_base, + &irqc_irq_domain_ops, p); + if (!p->irq_domain) { + ret = -ENXIO; + dev_err(&pdev->dev, "cannot initialize irq domain\n"); + goto err2; + } + + /* request interrupts one by one */ + for (k = 0; k < p->number_of_irqs; k++) { + if (request_irq(p->irq[k].requested_irq, irqc_irq_handler, + 0, name, &p->irq[k])) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + ret = -ENOENT; + goto err3; + } + } + + dev_info(&pdev->dev, "driving %d irqs\n", p->number_of_irqs); + + /* warn in case of mismatch if irq base is specified */ + if (p->config.irq_base) { + if (p->config.irq_base != p->irq[0].domain_irq) + dev_warn(&pdev->dev, "irq base mismatch (%d/%d)\n", + p->config.irq_base, p->irq[0].domain_irq); + } + + return 0; +err3: + for (; k >= 0; k--) + free_irq(p->irq[k - 1].requested_irq, &p->irq[k - 1]); + + irq_domain_remove(p->irq_domain); +err2: + iounmap(p->iomem); +err1: + kfree(p); +err0: + return ret; +} + +static int irqc_remove(struct platform_device *pdev) +{ + struct irqc_priv *p = platform_get_drvdata(pdev); + int k; + + for (k = 0; k < p->number_of_irqs; k++) + free_irq(p->irq[k].requested_irq, &p->irq[k]); + + irq_domain_remove(p->irq_domain); + iounmap(p->iomem); + kfree(p); + return 0; +} + +static const struct of_device_id irqc_dt_ids[] = { + { .compatible = "renesas,irqc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, irqc_dt_ids); + +static struct platform_driver irqc_device_driver = { + .probe = irqc_probe, + .remove = irqc_remove, + .driver = { + .name = "renesas_irqc", + .of_match_table = irqc_dt_ids, + .owner = THIS_MODULE, + } +}; + +static int __init irqc_init(void) +{ + return platform_driver_register(&irqc_device_driver); +} +postcore_initcall(irqc_init); + +static void __exit irqc_exit(void) +{ + platform_driver_unregister(&irqc_device_driver); +} +module_exit(irqc_exit); + +MODULE_AUTHOR("Magnus Damm"); +MODULE_DESCRIPTION("Renesas IRQC Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-s3c24xx/irq.c b/drivers/irqchip/irq-s3c24xx.c index b41c2cb7af4a..bbcc944ed94f 100644 --- a/arch/arm/mach-s3c24xx/irq.c +++ b/drivers/irqchip/irq-s3c24xx.c @@ -26,7 +26,11 @@ #include <linux/device.h> #include <linux/irqdomain.h> #include <linux/irqchip/chained_irq.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <asm/exception.h> #include <asm/mach/irq.h> #include <mach/regs-irq.h> @@ -36,6 +40,8 @@ #include <plat/regs-irqtype.h> #include <plat/pm.h> +#include "irqchip.h" + #define S3C_IRQTYPE_NONE 0 #define S3C_IRQTYPE_EINT 1 #define S3C_IRQTYPE_EDGE 2 @@ -43,6 +49,7 @@ struct s3c_irq_data { unsigned int type; + unsigned long offset; unsigned long parent_irq; /* data gets filled during init */ @@ -69,23 +76,34 @@ struct s3c_irq_intc { struct s3c_irq_data *irqs; }; +/* + * Array holding pointers to the global controller structs + * [0] ... main_intc + * [1] ... sub_intc + * [2] ... main_intc2 on s3c2416 + */ +static struct s3c_irq_intc *s3c_intc[3]; + static void s3c_irq_mask(struct irq_data *data) { - struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); + struct s3c_irq_intc *intc = irq_data->intc; struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; struct s3c_irq_data *parent_data; unsigned long mask; unsigned int irqno; mask = __raw_readl(intc->reg_mask); - mask |= (1UL << data->hwirq); + mask |= (1UL << irq_data->offset); __raw_writel(mask, intc->reg_mask); - if (parent_intc && irq_data->parent_irq) { + if (parent_intc) { parent_data = &parent_intc->irqs[irq_data->parent_irq]; - /* check to see if we need to mask the parent IRQ */ + /* check to see if we need to mask the parent IRQ + * The parent_irq is always in main_intc, so the hwirq + * for find_mapping does not need an offset in any case. + */ if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { irqno = irq_find_mapping(parent_intc->domain, irq_data->parent_irq); @@ -96,17 +114,17 @@ static void s3c_irq_mask(struct irq_data *data) static void s3c_irq_unmask(struct irq_data *data) { - struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); + struct s3c_irq_intc *intc = irq_data->intc; struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; unsigned long mask; unsigned int irqno; mask = __raw_readl(intc->reg_mask); - mask &= ~(1UL << data->hwirq); + mask &= ~(1UL << irq_data->offset); __raw_writel(mask, intc->reg_mask); - if (parent_intc && irq_data->parent_irq) { + if (parent_intc) { irqno = irq_find_mapping(parent_intc->domain, irq_data->parent_irq); s3c_irq_unmask(irq_get_irq_data(irqno)); @@ -115,14 +133,37 @@ static void s3c_irq_unmask(struct irq_data *data) static inline void s3c_irq_ack(struct irq_data *data) { - struct s3c_irq_intc *intc = data->domain->host_data; - unsigned long bitval = 1UL << data->hwirq; + struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); + struct s3c_irq_intc *intc = irq_data->intc; + unsigned long bitval = 1UL << irq_data->offset; __raw_writel(bitval, intc->reg_pending); if (intc->reg_intpnd) __raw_writel(bitval, intc->reg_intpnd); } +static int s3c_irq_type(struct irq_data *data, unsigned int type) +{ + switch (type) { + case IRQ_TYPE_NONE: + break; + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_BOTH: + irq_set_handler(data->irq, handle_edge_irq); + break; + case IRQ_TYPE_LEVEL_LOW: + case IRQ_TYPE_LEVEL_HIGH: + irq_set_handler(data->irq, handle_level_irq); + break; + default: + pr_err("No such irq type %d", type); + return -EINVAL; + } + + return 0; +} + static int s3c_irqext_type_set(void __iomem *gpcon_reg, void __iomem *extint_reg, unsigned long gpcon_offset, @@ -228,6 +269,7 @@ static struct irq_chip s3c_irq_chip = { .irq_ack = s3c_irq_ack, .irq_mask = s3c_irq_mask, .irq_unmask = s3c_irq_unmask, + .irq_set_type = s3c_irq_type, .irq_set_wake = s3c_irq_wake }; @@ -236,6 +278,7 @@ static struct irq_chip s3c_irq_level_chip = { .irq_mask = s3c_irq_mask, .irq_unmask = s3c_irq_unmask, .irq_ack = s3c_irq_ack, + .irq_set_type = s3c_irq_type, }; static struct irq_chip s3c_irqext_chip = { @@ -259,12 +302,19 @@ static struct irq_chip s3c_irq_eint0t4 = { static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_desc_get_chip(desc); - struct s3c_irq_intc *intc = desc->irq_data.domain->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq]; + struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc); + struct s3c_irq_intc *intc = irq_data->intc; struct s3c_irq_intc *sub_intc = irq_data->sub_intc; unsigned long src; unsigned long msk; unsigned int n; + unsigned int offset; + + /* we're using individual domains for the non-dt case + * and one big domain for the dt case where the subintc + * starts at hwirq number 32. + */ + offset = (intc->domain->of_node) ? 32 : 0; chained_irq_enter(chip, desc); @@ -277,12 +327,64 @@ static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) while (src) { n = __ffs(src); src &= ~(1 << n); - generic_handle_irq(irq_find_mapping(sub_intc->domain, n)); + irq = irq_find_mapping(sub_intc->domain, offset + n); + generic_handle_irq(irq); } chained_irq_exit(chip, desc); } +static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, + struct pt_regs *regs, int intc_offset) +{ + int pnd; + int offset; + int irq; + + pnd = __raw_readl(intc->reg_intpnd); + if (!pnd) + return false; + + /* non-dt machines use individual domains */ + if (!intc->domain->of_node) + intc_offset = 0; + + /* We have a problem that the INTOFFSET register does not always + * show one interrupt. Occasionally we get two interrupts through + * the prioritiser, and this causes the INTOFFSET register to show + * what looks like the logical-or of the two interrupt numbers. + * + * Thanks to Klaus, Shannon, et al for helping to debug this problem + */ + offset = __raw_readl(intc->reg_intpnd + 4); + + /* Find the bit manually, when the offset is wrong. + * The pending register only ever contains the one bit of the next + * interrupt to handle. + */ + if (!(pnd & (1 << offset))) + offset = __ffs(pnd); + + irq = irq_find_mapping(intc->domain, intc_offset + offset); + handle_IRQ(irq, regs); + return true; +} + +asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs) +{ + do { + if (likely(s3c_intc[0])) + if (s3c24xx_handle_intc(s3c_intc[0], regs, 0)) + continue; + + if (s3c_intc[2]) + if (s3c24xx_handle_intc(s3c_intc[2], regs, 64)) + continue; + + break; + } while (1); +} + #ifdef CONFIG_FIQ /** * s3c24xx_set_fiq - set the FIQ routing @@ -325,25 +427,21 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, struct s3c_irq_data *parent_irq_data; unsigned int irqno; - if (!intc) { - pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw); - return -EINVAL; - } - - if (!irq_data) { - pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw); - return -EINVAL; - } - /* attach controller pointer to irq_data */ irq_data->intc = intc; + irq_data->offset = hw; + + parent_intc = intc->parent; /* set handler and flags */ switch (irq_data->type) { case S3C_IRQTYPE_NONE: return 0; case S3C_IRQTYPE_EINT: - if (irq_data->parent_irq) + /* On the S3C2412, the EINT0to3 have a parent irq + * but need the s3c_irq_eint0t4 chip + */ + if (parent_intc && (!soc_is_s3c2412() || hw >= 4)) irq_set_chip_and_handler(virq, &s3c_irqext_chip, handle_edge_irq); else @@ -351,8 +449,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, handle_edge_irq); break; case S3C_IRQTYPE_EDGE: - if (irq_data->parent_irq || - intc->reg_pending == S3C2416_SRCPND2) + if (parent_intc || intc->reg_pending == S3C2416_SRCPND2) irq_set_chip_and_handler(virq, &s3c_irq_level_chip, handle_edge_irq); else @@ -360,7 +457,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, handle_edge_irq); break; case S3C_IRQTYPE_LEVEL: - if (irq_data->parent_irq) + if (parent_intc) irq_set_chip_and_handler(virq, &s3c_irq_level_chip, handle_level_irq); else @@ -371,23 +468,19 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); return -EINVAL; } + + irq_set_chip_data(virq, irq_data); + set_irq_flags(virq, IRQF_VALID); - if (irq_data->parent_irq) { - parent_intc = intc->parent; - if (!parent_intc) { - pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n", - hw); + if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) { + if (irq_data->parent_irq > 31) { + pr_err("irq-s3c24xx: parent irq %lu is out of range\n", + irq_data->parent_irq); goto err; } parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; - if (!irq_data) { - pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", - hw); - goto err; - } - parent_irq_data->sub_intc = intc; parent_irq_data->sub_bits |= (1UL << hw); @@ -442,7 +535,7 @@ static void s3c24xx_clear_intc(struct s3c_irq_intc *intc) } } -struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, +static struct s3c_irq_intc * __init s3c24xx_init_intc(struct device_node *np, struct s3c_irq_data *irq_data, struct s3c_irq_intc *parent, unsigned long address) @@ -451,7 +544,6 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, void __iomem *base = (void *)0xf6000000; /* static mapping */ int irq_num; int irq_start; - int irq_offset; int ret; intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); @@ -475,7 +567,6 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, intc->reg_intpnd = base + 0x10; irq_num = 32; irq_start = S3C2410_IRQ(0); - irq_offset = 0; break; case 0x4a000018: pr_debug("irq: found subintc\n"); @@ -483,7 +574,6 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, intc->reg_mask = base + 0x1c; irq_num = 29; irq_start = S3C2410_IRQSUB(0); - irq_offset = 0; break; case 0x4a000040: pr_debug("irq: found intc2\n"); @@ -492,7 +582,6 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, intc->reg_intpnd = base + 0x50; irq_num = 8; irq_start = S3C2416_IRQ(0); - irq_offset = 0; break; case 0x560000a4: pr_debug("irq: found eintc\n"); @@ -500,9 +589,8 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, intc->reg_mask = base + 0xa4; intc->reg_pending = base + 0xa8; - irq_num = 20; + irq_num = 24; irq_start = S3C2410_IRQ(32); - irq_offset = 4; break; default: pr_err("irq: unsupported controller address\n"); @@ -513,7 +601,7 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, /* now that all the data is complete, init the irq-domain */ s3c24xx_clear_intc(intc); intc->domain = irq_domain_add_legacy(np, irq_num, irq_start, - irq_offset, &s3c24xx_irq_ops, + 0, &s3c24xx_irq_ops, intc); if (!intc->domain) { pr_err("irq: could not create irq-domain\n"); @@ -521,6 +609,8 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, goto err; } + set_handle_irq(s3c24xx_handle_irq); + return intc; err: @@ -528,12 +618,35 @@ err: return ERR_PTR(ret); } -/* s3c24xx_init_irq - * - * Initialise S3C2410 IRQ system -*/ +static struct s3c_irq_data init_eint[32] = { + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ +}; -static struct s3c_irq_data init_base[32] = { +#ifdef CONFIG_CPU_S3C2410 +static struct s3c_irq_data init_s3c2410base[32] = { { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ @@ -568,11 +681,80 @@ static struct s3c_irq_data init_base[32] = { { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ }; -static struct s3c_irq_data init_eint[32] = { - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ - { .type = S3C_IRQTYPE_NONE, }, /* reserved */ +static struct s3c_irq_data init_s3c2410subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ +}; + +void __init s3c2410_init_irq(void) +{ +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0], + s3c_intc[0], 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); +} +#endif + +#ifdef CONFIG_CPU_S3C2412 +static struct s3c_irq_data init_s3c2412base[32] = { + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2412eint[32] = { + { .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ @@ -595,7 +777,7 @@ static struct s3c_irq_data init_eint[32] = { { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ }; -static struct s3c_irq_data init_subint[32] = { +static struct s3c_irq_data init_s3c2412subint[32] = { { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ @@ -607,25 +789,32 @@ static struct s3c_irq_data init_subint[32] = { { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_NONE, }, + { .type = S3C_IRQTYPE_NONE, }, + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */ }; -void __init s3c24xx_init_irq(void) +void __init s3c2412_init_irq(void) { - struct s3c_irq_intc *main_intc; + pr_info("S3C2412: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018); - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0], + s3c_intc[0], 0x4a000018); } +#endif #ifdef CONFIG_CPU_S3C2416 static struct s3c_irq_data init_s3c2416base[32] = { @@ -697,37 +886,185 @@ static struct s3c_irq_data init_s3c2416subint[32] = { static struct s3c_irq_data init_s3c2416_second[32] = { { .type = S3C_IRQTYPE_EDGE }, /* 2D */ - { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */ }; void __init s3c2416_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2416: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0], + s3c_intc[0], 0x4a000018); + + s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0], + NULL, 0x4a000040); +} + +#endif + +#ifdef CONFIG_CPU_S3C2440 +static struct s3c_irq_data init_s3c2440base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2440subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ +}; + +void __init s3c2440_init_irq(void) +{ + pr_info("S3C2440: IRQ Support\n"); - s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040); +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0], + s3c_intc[0], 0x4a000018); } +#endif +#ifdef CONFIG_CPU_S3C2442 +static struct s3c_irq_data init_s3c2442base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2442subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ +}; + +void __init s3c2442_init_irq(void) +{ + pr_info("S3C2442: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0], + s3c_intc[0], 0x4a000018); +} #endif #ifdef CONFIG_CPU_S3C2443 @@ -801,21 +1138,219 @@ static struct s3c_irq_data init_s3c2443subint[32] = { void __init s3c2443_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2443: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0], + s3c_intc[0], 0x4a000018); +} +#endif + +#ifdef CONFIG_OF +static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + unsigned int ctrl_num = hw / 32; + unsigned int intc_hw = hw % 32; + struct s3c_irq_intc *intc = s3c_intc[ctrl_num]; + struct s3c_irq_intc *parent_intc = intc->parent; + struct s3c_irq_data *irq_data = &intc->irqs[intc_hw]; + + /* attach controller pointer to irq_data */ + irq_data->intc = intc; + irq_data->offset = intc_hw; + + if (!parent_intc) + irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_level_chip, + handle_edge_irq); + + irq_set_chip_data(virq, irq_data); + + set_irq_flags(virq, IRQF_VALID); + + return 0; +} + +/* Translate our of irq notation + * format: <ctrl_num ctrl_irq parent_irq type> + */ +static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_type) +{ + struct s3c_irq_intc *intc; + struct s3c_irq_intc *parent_intc; + struct s3c_irq_data *irq_data; + struct s3c_irq_data *parent_irq_data; + int irqno; + + if (WARN_ON(intsize < 4)) + return -EINVAL; + + if (intspec[0] > 2 || !s3c_intc[intspec[0]]) { + pr_err("controller number %d invalid\n", intspec[0]); + return -EINVAL; + } + intc = s3c_intc[intspec[0]]; + + *out_hwirq = intspec[0] * 32 + intspec[2]; + *out_type = intspec[3] & IRQ_TYPE_SENSE_MASK; + + parent_intc = intc->parent; + if (parent_intc) { + irq_data = &intc->irqs[intspec[2]]; + irq_data->parent_irq = intspec[1]; + parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; + parent_irq_data->sub_intc = intc; + parent_irq_data->sub_bits |= (1UL << intspec[2]); + + /* parent_intc is always s3c_intc[0], so no offset */ + irqno = irq_create_mapping(parent_intc->domain, intspec[1]); + if (irqno < 0) { + pr_err("irq: could not map parent interrupt\n"); + return irqno; + } + + irq_set_chained_handler(irqno, s3c_irq_demux); + } + + return 0; +} + +static struct irq_domain_ops s3c24xx_irq_ops_of = { + .map = s3c24xx_irq_map_of, + .xlate = s3c24xx_irq_xlate_of, +}; + +struct s3c24xx_irq_of_ctrl { + char *name; + unsigned long offset; + struct s3c_irq_intc **handle; + struct s3c_irq_intc **parent; + struct irq_domain_ops *ops; +}; + +static int __init s3c_init_intc_of(struct device_node *np, + struct device_node *interrupt_parent, + struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl) +{ + struct s3c_irq_intc *intc; + struct s3c24xx_irq_of_ctrl *ctrl; + struct irq_domain *domain; + void __iomem *reg_base; + int i; + + reg_base = of_iomap(np, 0); + if (!reg_base) { + pr_err("irq-s3c24xx: could not map irq registers\n"); + return -EINVAL; + } + + domain = irq_domain_add_linear(np, num_ctrl * 32, + &s3c24xx_irq_ops_of, NULL); + if (!domain) { + pr_err("irq: could not create irq-domain\n"); + return -EINVAL; + } + + for (i = 0; i < num_ctrl; i++) { + ctrl = &s3c_ctrl[i]; + + pr_debug("irq: found controller %s\n", ctrl->name); + + intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); + if (!intc) + return -ENOMEM; + + intc->domain = domain; + intc->irqs = kzalloc(sizeof(struct s3c_irq_data) * 32, + GFP_KERNEL); + if (!intc->irqs) { + kfree(intc); + return -ENOMEM; + } + + if (ctrl->parent) { + intc->reg_pending = reg_base + ctrl->offset; + intc->reg_mask = reg_base + ctrl->offset + 0x4; + + if (*(ctrl->parent)) { + intc->parent = *(ctrl->parent); + } else { + pr_warn("irq: parent of %s missing\n", + ctrl->name); + kfree(intc->irqs); + kfree(intc); + continue; + } + } else { + intc->reg_pending = reg_base + ctrl->offset; + intc->reg_mask = reg_base + ctrl->offset + 0x08; + intc->reg_intpnd = reg_base + ctrl->offset + 0x10; + } + + s3c24xx_clear_intc(intc); + s3c_intc[i] = intc; + } + + set_handle_irq(s3c24xx_handle_irq); + + return 0; +} + +static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = { + { + .name = "intc", + .offset = 0, + }, { + .name = "subintc", + .offset = 0x18, + .parent = &s3c_intc[0], + } +}; + +int __init s3c2410_init_intc_of(struct device_node *np, + struct device_node *interrupt_parent, + struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl) +{ + return s3c_init_intc_of(np, interrupt_parent, + s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl)); +} +IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of); + +static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = { + { + .name = "intc", + .offset = 0, + }, { + .name = "subintc", + .offset = 0x18, + .parent = &s3c_intc[0], + }, { + .name = "intc2", + .offset = 0x40, + } +}; + +int __init s3c2416_init_intc_of(struct device_node *np, + struct device_node *interrupt_parent, + struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl) +{ + return s3c_init_intc_of(np, interrupt_parent, + s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl)); } +IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of); #endif diff --git a/arch/arm/mach-vt8500/irq.c b/drivers/irqchip/irq-vt8500.c index b9cf5ce9efbb..d97059550a2c 100644 --- a/arch/arm/mach-vt8500/irq.c +++ b/drivers/irqchip/irq-vt8500.c @@ -37,6 +37,9 @@ #include <asm/irq.h> #include <asm/exception.h> +#include <asm/mach/irq.h> + +#include "irqchip.h" #define VT8500_ICPC_IRQ 0x20 #define VT8500_ICPC_FIQ 0x24 @@ -225,6 +228,8 @@ int __init vt8500_irq_init(struct device_node *node, struct device_node *parent) goto out; } + set_handle_irq(vt8500_handle_irq); + vt8500_init_irq_hw(intc[active_cnt].base); pr_info("vt8500-irq: Added interrupt controller\n"); @@ -251,3 +256,4 @@ out: return 0; } +IRQCHIP_DECLARE(vt8500_irq, "via,vt8500-intc", vt8500_irq_init); diff --git a/drivers/of/base.c b/drivers/of/base.c index 0a2bdd106b23..c76d16c972cc 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -747,6 +747,64 @@ struct device_node *of_find_node_by_phandle(phandle handle) EXPORT_SYMBOL(of_find_node_by_phandle); /** + * of_find_property_value_of_size + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @len: requested length of property value + * + * Search for a property in a device node and valid the requested size. + * Returns the property value on success, -EINVAL if the property does not + * exist, -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + */ +static void *of_find_property_value_of_size(const struct device_node *np, + const char *propname, u32 len) +{ + struct property *prop = of_find_property(np, propname, NULL); + + if (!prop) + return ERR_PTR(-EINVAL); + if (!prop->value) + return ERR_PTR(-ENODATA); + if (len > prop->length) + return ERR_PTR(-EOVERFLOW); + + return prop->value; +} + +/** + * of_property_read_u32_index - Find and read a u32 from a multi-value property. + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @index: index of the u32 in the list of values + * @out_value: pointer to return value, modified only if no error. + * + * Search for a property in a device node and read nth 32-bit value from + * it. Returns 0 on success, -EINVAL if the property does not exist, + * -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + * The out_value is modified only if a valid u32 value can be decoded. + */ +int of_property_read_u32_index(const struct device_node *np, + const char *propname, + u32 index, u32 *out_value) +{ + const u32 *val = of_find_property_value_of_size(np, propname, + ((index + 1) * sizeof(*out_value))); + + if (IS_ERR(val)) + return PTR_ERR(val); + + *out_value = be32_to_cpup(((__be32 *)val) + index); + return 0; +} +EXPORT_SYMBOL_GPL(of_property_read_u32_index); + +/** * of_property_read_u8_array - Find and read an array of u8 from a property. * * @np: device node from which the property value is to be read. @@ -767,17 +825,12 @@ EXPORT_SYMBOL(of_find_node_by_phandle); int of_property_read_u8_array(const struct device_node *np, const char *propname, u8 *out_values, size_t sz) { - struct property *prop = of_find_property(np, propname, NULL); - const u8 *val; + const u8 *val = of_find_property_value_of_size(np, propname, + (sz * sizeof(*out_values))); - if (!prop) - return -EINVAL; - if (!prop->value) - return -ENODATA; - if ((sz * sizeof(*out_values)) > prop->length) - return -EOVERFLOW; + if (IS_ERR(val)) + return PTR_ERR(val); - val = prop->value; while (sz--) *out_values++ = *val++; return 0; @@ -805,17 +858,12 @@ EXPORT_SYMBOL_GPL(of_property_read_u8_array); int of_property_read_u16_array(const struct device_node *np, const char *propname, u16 *out_values, size_t sz) { - struct property *prop = of_find_property(np, propname, NULL); - const __be16 *val; + const __be16 *val = of_find_property_value_of_size(np, propname, + (sz * sizeof(*out_values))); - if (!prop) - return -EINVAL; - if (!prop->value) - return -ENODATA; - if ((sz * sizeof(*out_values)) > prop->length) - return -EOVERFLOW; + if (IS_ERR(val)) + return PTR_ERR(val); - val = prop->value; while (sz--) *out_values++ = be16_to_cpup(val++); return 0; @@ -842,17 +890,12 @@ int of_property_read_u32_array(const struct device_node *np, const char *propname, u32 *out_values, size_t sz) { - struct property *prop = of_find_property(np, propname, NULL); - const __be32 *val; + const __be32 *val = of_find_property_value_of_size(np, propname, + (sz * sizeof(*out_values))); - if (!prop) - return -EINVAL; - if (!prop->value) - return -ENODATA; - if ((sz * sizeof(*out_values)) > prop->length) - return -EOVERFLOW; + if (IS_ERR(val)) + return PTR_ERR(val); - val = prop->value; while (sz--) *out_values++ = be32_to_cpup(val++); return 0; @@ -875,15 +918,13 @@ EXPORT_SYMBOL_GPL(of_property_read_u32_array); int of_property_read_u64(const struct device_node *np, const char *propname, u64 *out_value) { - struct property *prop = of_find_property(np, propname, NULL); + const __be32 *val = of_find_property_value_of_size(np, propname, + sizeof(*out_value)); - if (!prop) - return -EINVAL; - if (!prop->value) - return -ENODATA; - if (sizeof(*out_value) > prop->length) - return -EOVERFLOW; - *out_value = of_read_number(prop->value, 2); + if (IS_ERR(val)) + return PTR_ERR(val); + + *out_value = of_read_number(val, 2); return 0; } EXPORT_SYMBOL_GPL(of_property_read_u64); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 51336b2aedc9..8f6692438149 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -224,6 +224,7 @@ config PINCTRL_S3C64XX source "drivers/pinctrl/mvebu/Kconfig" source "drivers/pinctrl/sh-pfc/Kconfig" source "drivers/pinctrl/spear/Kconfig" +source "drivers/pinctrl/vt8500/Kconfig" config PINCTRL_XWAY bool diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index b9aaa61facd1..9bdaeb8785ce 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -50,3 +50,4 @@ obj-$(CONFIG_PLAT_ORION) += mvebu/ obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/ obj-$(CONFIG_SUPERH) += sh-pfc/ obj-$(CONFIG_PLAT_SPEAR) += spear/ +obj-$(CONFIG_ARCH_VT8500) += vt8500/ diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c index f28d4b08771a..c8f20a3d8f88 100644 --- a/drivers/pinctrl/pinctrl-bcm2835.c +++ b/drivers/pinctrl/pinctrl-bcm2835.c @@ -699,11 +699,6 @@ static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc, return 0; } -static inline u32 prop_u32(struct property *p, int i) -{ - return be32_to_cpup(((__be32 *)p->value) + i); -} - static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, struct device_node *np, struct pinctrl_map **map, unsigned *num_maps) @@ -761,7 +756,9 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, return -ENOMEM; for (i = 0; i < num_pins; i++) { - pin = prop_u32(pins, i); + err = of_property_read_u32_index(np, "brcm,pins", i, &pin); + if (err) + goto out; if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) { dev_err(pc->dev, "%s: invalid brcm,pins value %d\n", of_node_full_name(np), pin); @@ -770,14 +767,20 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, } if (num_funcs) { - func = prop_u32(funcs, (num_funcs > 1) ? i : 0); + err = of_property_read_u32_index(np, "brcm,function", + (num_funcs > 1) ? i : 0, &func); + if (err) + goto out; err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin, func, &cur_map); if (err) goto out; } if (num_pulls) { - pull = prop_u32(pulls, (num_pulls > 1) ? i : 0); + err = of_property_read_u32_index(np, "brcm,pull", + (num_funcs > 1) ? i : 0, &pull); + if (err) + goto out; err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin, pull, &cur_map); if (err) diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index ec1567842a7e..ac742817ebce 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -700,3 +700,111 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .label = "exynos4x12-gpio-ctrl3", }, }; + +/* pin banks of exynos5250 pin-controller 0 */ +static struct samsung_pin_bank exynos5250_pin_banks0[] = { + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), + EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08), + EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c), + EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10), + EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14), + EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpb3", 0x18), + EXYNOS_PIN_BANK_EINTG(7, 0x0E0, "gpc0", 0x1c), + EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc1", 0x20), + EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc2", 0x24), + EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc3", 0x28), + EXYNOS_PIN_BANK_EINTG(4, 0x160, "gpd0", 0x2c), + EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x30), + EXYNOS_PIN_BANK_EINTG(7, 0x2E0, "gpc4", 0x34), + EXYNOS_PIN_BANK_EINTN(6, 0x1A0, "gpy0"), + EXYNOS_PIN_BANK_EINTN(4, 0x1C0, "gpy1"), + EXYNOS_PIN_BANK_EINTN(6, 0x1E0, "gpy2"), + EXYNOS_PIN_BANK_EINTN(8, 0x200, "gpy3"), + EXYNOS_PIN_BANK_EINTN(8, 0x220, "gpy4"), + EXYNOS_PIN_BANK_EINTN(8, 0x240, "gpy5"), + EXYNOS_PIN_BANK_EINTN(8, 0x260, "gpy6"), + EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), + EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04), + EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08), + EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c), +}; + +/* pin banks of exynos5250 pin-controller 1 */ +static struct samsung_pin_bank exynos5250_pin_banks1[] = { + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00), + EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04), + EXYNOS_PIN_BANK_EINTG(4, 0x040, "gpf0", 0x08), + EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf1", 0x0c), + EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpg0", 0x10), + EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpg1", 0x14), + EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpg2", 0x18), + EXYNOS_PIN_BANK_EINTG(4, 0x0E0, "gph0", 0x1c), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gph1", 0x20), +}; + +/* pin banks of exynos5250 pin-controller 2 */ +static struct samsung_pin_bank exynos5250_pin_banks2[] = { + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00), + EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08), + EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpv3", 0x0c), + EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpv4", 0x10), +}; + +/* pin banks of exynos5250 pin-controller 3 */ +static struct samsung_pin_bank exynos5250_pin_banks3[] = { + EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00), +}; + +/* + * Samsung pinctrl driver data for Exynos5250 SoC. Exynos5250 SoC includes + * four gpio/pin-mux/pinconfig controllers. + */ +struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { + { + /* pin-controller instance 0 data */ + .pin_banks = exynos5250_pin_banks0, + .nr_banks = ARRAY_SIZE(exynos5250_pin_banks0), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .weint_con = EXYNOS_WKUP_ECON_OFFSET, + .weint_mask = EXYNOS_WKUP_EMASK_OFFSET, + .weint_pend = EXYNOS_WKUP_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .eint_wkup_init = exynos_eint_wkup_init, + .label = "exynos5250-gpio-ctrl0", + }, { + /* pin-controller instance 1 data */ + .pin_banks = exynos5250_pin_banks1, + .nr_banks = ARRAY_SIZE(exynos5250_pin_banks1), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos5250-gpio-ctrl1", + }, { + /* pin-controller instance 2 data */ + .pin_banks = exynos5250_pin_banks2, + .nr_banks = ARRAY_SIZE(exynos5250_pin_banks2), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos5250-gpio-ctrl2", + }, { + /* pin-controller instance 3 data */ + .pin_banks = exynos5250_pin_banks3, + .nr_banks = ARRAY_SIZE(exynos5250_pin_banks3), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos5250-gpio-ctrl3", + }, +}; diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 4f54faf2971f..976366899f68 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -970,6 +970,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = { .data = (void *)exynos4210_pin_ctrl }, { .compatible = "samsung,exynos4x12-pinctrl", .data = (void *)exynos4x12_pin_ctrl }, + { .compatible = "samsung,exynos5250-pinctrl", + .data = (void *)exynos5250_pin_ctrl }, #endif #ifdef CONFIG_PINCTRL_S3C64XX { .compatible = "samsung,s3c64xx-pinctrl", diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index 45f27b41e30c..7c7f9ebcd05b 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -244,6 +244,7 @@ struct samsung_pmx_func { /* list of all exported SoC specific data */ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[]; extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[]; +extern struct samsung_pin_ctrl exynos5250_pin_ctrl[]; extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[]; #endif /* __PINCTRL_SAMSUNG_H */ diff --git a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c index 709008e94124..6f15c03077a0 100644 --- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c +++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c @@ -2733,9 +2733,9 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; -/* IRQ pins through INTCS with IRQ0->15 from 0x200 and IRQ16-31 from 0x3200 */ -#define EXT_IRQ16L(n) intcs_evt2irq(0x200 + ((n) << 5)) -#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5)) +/* External IRQ pins mapped at IRQPIN_BASE */ +#define EXT_IRQ16L(n) irq_pin(n) +#define EXT_IRQ16H(n) irq_pin(n) static struct pinmux_irq pinmux_irqs[] = { PINMUX_IRQ(EXT_IRQ16H(19), PORT9_FN0), diff --git a/drivers/pinctrl/vt8500/Kconfig b/drivers/pinctrl/vt8500/Kconfig new file mode 100644 index 000000000000..55724a73d94a --- /dev/null +++ b/drivers/pinctrl/vt8500/Kconfig @@ -0,0 +1,52 @@ +# +# VIA/Wondermedia PINCTRL drivers +# + +if ARCH_VT8500 + +config PINCTRL_WMT + bool + select PINMUX + select GENERIC_PINCONF + +config PINCTRL_VT8500 + bool "VIA VT8500 pin controller driver" + depends on ARCH_WM8505 + select PINCTRL_WMT + help + Say yes here to support the gpio/pin control module on + VIA VT8500 SoCs. + +config PINCTRL_WM8505 + bool "Wondermedia WM8505 pin controller driver" + depends on ARCH_WM8505 + select PINCTRL_WMT + help + Say yes here to support the gpio/pin control module on + Wondermedia WM8505 SoCs. + +config PINCTRL_WM8650 + bool "Wondermedia WM8650 pin controller driver" + depends on ARCH_WM8505 + select PINCTRL_WMT + help + Say yes here to support the gpio/pin control module on + Wondermedia WM8650 SoCs. + +config PINCTRL_WM8750 + bool "Wondermedia WM8750 pin controller driver" + depends on ARCH_WM8750 + select PINCTRL_WMT + help + Say yes here to support the gpio/pin control module on + Wondermedia WM8750 SoCs. + +config PINCTRL_WM8850 + bool "Wondermedia WM8850 pin controller driver" + depends on ARCH_WM8850 + select PINCTRL_WMT + help + Say yes here to support the gpio/pin control module on + Wondermedia WM8850 SoCs. + +endif diff --git a/drivers/pinctrl/vt8500/Makefile b/drivers/pinctrl/vt8500/Makefile new file mode 100644 index 000000000000..24ec45dd0d80 --- /dev/null +++ b/drivers/pinctrl/vt8500/Makefile @@ -0,0 +1,8 @@ +# VIA/Wondermedia pinctrl support + +obj-$(CONFIG_PINCTRL_WMT) += pinctrl-wmt.o +obj-$(CONFIG_PINCTRL_VT8500) += pinctrl-vt8500.o +obj-$(CONFIG_PINCTRL_WM8505) += pinctrl-wm8505.o +obj-$(CONFIG_PINCTRL_WM8650) += pinctrl-wm8650.o +obj-$(CONFIG_PINCTRL_WM8750) += pinctrl-wm8750.o +obj-$(CONFIG_PINCTRL_WM8850) += pinctrl-wm8850.o diff --git a/drivers/pinctrl/vt8500/pinctrl-vt8500.c b/drivers/pinctrl/vt8500/pinctrl-vt8500.c new file mode 100644 index 000000000000..f2fe9f85cfa6 --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-vt8500.c @@ -0,0 +1,501 @@ +/* + * Pinctrl data for VIA VT8500 SoC + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "pinctrl-wmt.h" + +/* + * Describe the register offsets within the GPIO memory space + * The dedicated external GPIO's should always be listed in bank 0 + * so they are exported in the 0..31 range which is what users + * expect. + * + * Do not reorder these banks as it will change the pin numbering + */ +static const struct wmt_pinctrl_bank_registers vt8500_banks[] = { + WMT_PINCTRL_BANK(NO_REG, 0x3C, 0x5C, 0x7C, NO_REG, NO_REG), /* 0 */ + WMT_PINCTRL_BANK(0x00, 0x20, 0x40, 0x60, NO_REG, NO_REG), /* 1 */ + WMT_PINCTRL_BANK(0x04, 0x24, 0x44, 0x64, NO_REG, NO_REG), /* 2 */ + WMT_PINCTRL_BANK(0x08, 0x28, 0x48, 0x68, NO_REG, NO_REG), /* 3 */ + WMT_PINCTRL_BANK(0x0C, 0x2C, 0x4C, 0x6C, NO_REG, NO_REG), /* 4 */ + WMT_PINCTRL_BANK(0x10, 0x30, 0x50, 0x70, NO_REG, NO_REG), /* 5 */ + WMT_PINCTRL_BANK(0x14, 0x34, 0x54, 0x74, NO_REG, NO_REG), /* 6 */ +}; + +/* Please keep sorted by bank/bit */ +#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0) +#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1) +#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2) +#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3) +#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4) +#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5) +#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6) +#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7) +#define WMT_PIN_EXTGPIO8 WMT_PIN(0, 8) +#define WMT_PIN_UART0RTS WMT_PIN(1, 0) +#define WMT_PIN_UART0TXD WMT_PIN(1, 1) +#define WMT_PIN_UART0CTS WMT_PIN(1, 2) +#define WMT_PIN_UART0RXD WMT_PIN(1, 3) +#define WMT_PIN_UART1RTS WMT_PIN(1, 4) +#define WMT_PIN_UART1TXD WMT_PIN(1, 5) +#define WMT_PIN_UART1CTS WMT_PIN(1, 6) +#define WMT_PIN_UART1RXD WMT_PIN(1, 7) +#define WMT_PIN_SPI0CLK WMT_PIN(1, 8) +#define WMT_PIN_SPI0SS WMT_PIN(1, 9) +#define WMT_PIN_SPI0MISO WMT_PIN(1, 10) +#define WMT_PIN_SPI0MOSI WMT_PIN(1, 11) +#define WMT_PIN_SPI1CLK WMT_PIN(1, 12) +#define WMT_PIN_SPI1SS WMT_PIN(1, 13) +#define WMT_PIN_SPI1MISO WMT_PIN(1, 14) +#define WMT_PIN_SPI1MOSI WMT_PIN(1, 15) +#define WMT_PIN_SPI2CLK WMT_PIN(1, 16) +#define WMT_PIN_SPI2SS WMT_PIN(1, 17) +#define WMT_PIN_SPI2MISO WMT_PIN(1, 18) +#define WMT_PIN_SPI2MOSI WMT_PIN(1, 19) +#define WMT_PIN_SDDATA0 WMT_PIN(2, 0) +#define WMT_PIN_SDDATA1 WMT_PIN(2, 1) +#define WMT_PIN_SDDATA2 WMT_PIN(2, 2) +#define WMT_PIN_SDDATA3 WMT_PIN(2, 3) +#define WMT_PIN_MMCDATA0 WMT_PIN(2, 4) +#define WMT_PIN_MMCDATA1 WMT_PIN(2, 5) +#define WMT_PIN_MMCDATA2 WMT_PIN(2, 6) +#define WMT_PIN_MMCDATA3 WMT_PIN(2, 7) +#define WMT_PIN_SDCLK WMT_PIN(2, 8) +#define WMT_PIN_SDWP WMT_PIN(2, 9) +#define WMT_PIN_SDCMD WMT_PIN(2, 10) +#define WMT_PIN_MSDATA0 WMT_PIN(2, 16) +#define WMT_PIN_MSDATA1 WMT_PIN(2, 17) +#define WMT_PIN_MSDATA2 WMT_PIN(2, 18) +#define WMT_PIN_MSDATA3 WMT_PIN(2, 19) +#define WMT_PIN_MSCLK WMT_PIN(2, 20) +#define WMT_PIN_MSBS WMT_PIN(2, 21) +#define WMT_PIN_MSINS WMT_PIN(2, 22) +#define WMT_PIN_I2C0SCL WMT_PIN(2, 24) +#define WMT_PIN_I2C0SDA WMT_PIN(2, 25) +#define WMT_PIN_I2C1SCL WMT_PIN(2, 26) +#define WMT_PIN_I2C1SDA WMT_PIN(2, 27) +#define WMT_PIN_MII0RXD0 WMT_PIN(3, 0) +#define WMT_PIN_MII0RXD1 WMT_PIN(3, 1) +#define WMT_PIN_MII0RXD2 WMT_PIN(3, 2) +#define WMT_PIN_MII0RXD3 WMT_PIN(3, 3) +#define WMT_PIN_MII0RXCLK WMT_PIN(3, 4) +#define WMT_PIN_MII0RXDV WMT_PIN(3, 5) +#define WMT_PIN_MII0RXERR WMT_PIN(3, 6) +#define WMT_PIN_MII0PHYRST WMT_PIN(3, 7) +#define WMT_PIN_MII0TXD0 WMT_PIN(3, 8) +#define WMT_PIN_MII0TXD1 WMT_PIN(3, 9) +#define WMT_PIN_MII0TXD2 WMT_PIN(3, 10) +#define WMT_PIN_MII0TXD3 WMT_PIN(3, 11) +#define WMT_PIN_MII0TXCLK WMT_PIN(3, 12) +#define WMT_PIN_MII0TXEN WMT_PIN(3, 13) +#define WMT_PIN_MII0TXERR WMT_PIN(3, 14) +#define WMT_PIN_MII0PHYPD WMT_PIN(3, 15) +#define WMT_PIN_MII0COL WMT_PIN(3, 16) +#define WMT_PIN_MII0CRS WMT_PIN(3, 17) +#define WMT_PIN_MII0MDIO WMT_PIN(3, 18) +#define WMT_PIN_MII0MDC WMT_PIN(3, 19) +#define WMT_PIN_SEECS WMT_PIN(3, 20) +#define WMT_PIN_SEECK WMT_PIN(3, 21) +#define WMT_PIN_SEEDI WMT_PIN(3, 22) +#define WMT_PIN_SEEDO WMT_PIN(3, 23) +#define WMT_PIN_IDEDREQ0 WMT_PIN(3, 24) +#define WMT_PIN_IDEDREQ1 WMT_PIN(3, 25) +#define WMT_PIN_IDEIOW WMT_PIN(3, 26) +#define WMT_PIN_IDEIOR WMT_PIN(3, 27) +#define WMT_PIN_IDEDACK WMT_PIN(3, 28) +#define WMT_PIN_IDEIORDY WMT_PIN(3, 29) +#define WMT_PIN_IDEINTRQ WMT_PIN(3, 30) +#define WMT_PIN_VDIN0 WMT_PIN(4, 0) +#define WMT_PIN_VDIN1 WMT_PIN(4, 1) +#define WMT_PIN_VDIN2 WMT_PIN(4, 2) +#define WMT_PIN_VDIN3 WMT_PIN(4, 3) +#define WMT_PIN_VDIN4 WMT_PIN(4, 4) +#define WMT_PIN_VDIN5 WMT_PIN(4, 5) +#define WMT_PIN_VDIN6 WMT_PIN(4, 6) +#define WMT_PIN_VDIN7 WMT_PIN(4, 7) +#define WMT_PIN_VDOUT0 WMT_PIN(4, 8) +#define WMT_PIN_VDOUT1 WMT_PIN(4, 9) +#define WMT_PIN_VDOUT2 WMT_PIN(4, 10) +#define WMT_PIN_VDOUT3 WMT_PIN(4, 11) +#define WMT_PIN_VDOUT4 WMT_PIN(4, 12) +#define WMT_PIN_VDOUT5 WMT_PIN(4, 13) +#define WMT_PIN_NANDCLE0 WMT_PIN(4, 14) +#define WMT_PIN_NANDCLE1 WMT_PIN(4, 15) +#define WMT_PIN_VDOUT6_7 WMT_PIN(4, 16) +#define WMT_PIN_VHSYNC WMT_PIN(4, 17) +#define WMT_PIN_VVSYNC WMT_PIN(4, 18) +#define WMT_PIN_TSDIN0 WMT_PIN(5, 8) +#define WMT_PIN_TSDIN1 WMT_PIN(5, 9) +#define WMT_PIN_TSDIN2 WMT_PIN(5, 10) +#define WMT_PIN_TSDIN3 WMT_PIN(5, 11) +#define WMT_PIN_TSDIN4 WMT_PIN(5, 12) +#define WMT_PIN_TSDIN5 WMT_PIN(5, 13) +#define WMT_PIN_TSDIN6 WMT_PIN(5, 14) +#define WMT_PIN_TSDIN7 WMT_PIN(5, 15) +#define WMT_PIN_TSSYNC WMT_PIN(5, 16) +#define WMT_PIN_TSVALID WMT_PIN(5, 17) +#define WMT_PIN_TSCLK WMT_PIN(5, 18) +#define WMT_PIN_LCDD0 WMT_PIN(6, 0) +#define WMT_PIN_LCDD1 WMT_PIN(6, 1) +#define WMT_PIN_LCDD2 WMT_PIN(6, 2) +#define WMT_PIN_LCDD3 WMT_PIN(6, 3) +#define WMT_PIN_LCDD4 WMT_PIN(6, 4) +#define WMT_PIN_LCDD5 WMT_PIN(6, 5) +#define WMT_PIN_LCDD6 WMT_PIN(6, 6) +#define WMT_PIN_LCDD7 WMT_PIN(6, 7) +#define WMT_PIN_LCDD8 WMT_PIN(6, 8) +#define WMT_PIN_LCDD9 WMT_PIN(6, 9) +#define WMT_PIN_LCDD10 WMT_PIN(6, 10) +#define WMT_PIN_LCDD11 WMT_PIN(6, 11) +#define WMT_PIN_LCDD12 WMT_PIN(6, 12) +#define WMT_PIN_LCDD13 WMT_PIN(6, 13) +#define WMT_PIN_LCDD14 WMT_PIN(6, 14) +#define WMT_PIN_LCDD15 WMT_PIN(6, 15) +#define WMT_PIN_LCDD16 WMT_PIN(6, 16) +#define WMT_PIN_LCDD17 WMT_PIN(6, 17) +#define WMT_PIN_LCDCLK WMT_PIN(6, 18) +#define WMT_PIN_LCDDEN WMT_PIN(6, 19) +#define WMT_PIN_LCDLINE WMT_PIN(6, 20) +#define WMT_PIN_LCDFRM WMT_PIN(6, 21) +#define WMT_PIN_LCDBIAS WMT_PIN(6, 22) + +static const struct pinctrl_pin_desc vt8500_pins[] = { + PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"), + PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"), + PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"), + PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"), + PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"), + PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"), + PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"), + PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"), + PINCTRL_PIN(WMT_PIN_EXTGPIO8, "extgpio8"), + PINCTRL_PIN(WMT_PIN_UART0RTS, "uart0_rts"), + PINCTRL_PIN(WMT_PIN_UART0TXD, "uart0_txd"), + PINCTRL_PIN(WMT_PIN_UART0CTS, "uart0_cts"), + PINCTRL_PIN(WMT_PIN_UART0RXD, "uart0_rxd"), + PINCTRL_PIN(WMT_PIN_UART1RTS, "uart1_rts"), + PINCTRL_PIN(WMT_PIN_UART1TXD, "uart1_txd"), + PINCTRL_PIN(WMT_PIN_UART1CTS, "uart1_cts"), + PINCTRL_PIN(WMT_PIN_UART1RXD, "uart1_rxd"), + PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"), + PINCTRL_PIN(WMT_PIN_SPI0SS, "spi0_ss"), + PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"), + PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"), + PINCTRL_PIN(WMT_PIN_SPI1CLK, "spi1_clk"), + PINCTRL_PIN(WMT_PIN_SPI1SS, "spi1_ss"), + PINCTRL_PIN(WMT_PIN_SPI1MISO, "spi1_miso"), + PINCTRL_PIN(WMT_PIN_SPI1MOSI, "spi1_mosi"), + PINCTRL_PIN(WMT_PIN_SPI2CLK, "spi2_clk"), + PINCTRL_PIN(WMT_PIN_SPI2SS, "spi2_ss"), + PINCTRL_PIN(WMT_PIN_SPI2MISO, "spi2_miso"), + PINCTRL_PIN(WMT_PIN_SPI2MOSI, "spi2_mosi"), + PINCTRL_PIN(WMT_PIN_SDDATA0, "sd_data0"), + PINCTRL_PIN(WMT_PIN_SDDATA1, "sd_data1"), + PINCTRL_PIN(WMT_PIN_SDDATA2, "sd_data2"), + PINCTRL_PIN(WMT_PIN_SDDATA3, "sd_data3"), + PINCTRL_PIN(WMT_PIN_MMCDATA0, "mmc_data0"), + PINCTRL_PIN(WMT_PIN_MMCDATA1, "mmc_data1"), + PINCTRL_PIN(WMT_PIN_MMCDATA2, "mmc_data2"), + PINCTRL_PIN(WMT_PIN_MMCDATA3, "mmc_data3"), + PINCTRL_PIN(WMT_PIN_SDCLK, "sd_clk"), + PINCTRL_PIN(WMT_PIN_SDWP, "sd_wp"), + PINCTRL_PIN(WMT_PIN_SDCMD, "sd_cmd"), + PINCTRL_PIN(WMT_PIN_MSDATA0, "ms_data0"), + PINCTRL_PIN(WMT_PIN_MSDATA1, "ms_data1"), + PINCTRL_PIN(WMT_PIN_MSDATA2, "ms_data2"), + PINCTRL_PIN(WMT_PIN_MSDATA3, "ms_data3"), + PINCTRL_PIN(WMT_PIN_MSCLK, "ms_clk"), + PINCTRL_PIN(WMT_PIN_MSBS, "ms_bs"), + PINCTRL_PIN(WMT_PIN_MSINS, "ms_ins"), + PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"), + PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"), + PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"), + PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"), + PINCTRL_PIN(WMT_PIN_MII0RXD0, "mii0_rxd0"), + PINCTRL_PIN(WMT_PIN_MII0RXD1, "mii0_rxd1"), + PINCTRL_PIN(WMT_PIN_MII0RXD2, "mii0_rxd2"), + PINCTRL_PIN(WMT_PIN_MII0RXD3, "mii0_rxd3"), + PINCTRL_PIN(WMT_PIN_MII0RXCLK, "mii0_rxclk"), + PINCTRL_PIN(WMT_PIN_MII0RXDV, "mii0_rxdv"), + PINCTRL_PIN(WMT_PIN_MII0RXERR, "mii0_rxerr"), + PINCTRL_PIN(WMT_PIN_MII0PHYRST, "mii0_phyrst"), + PINCTRL_PIN(WMT_PIN_MII0TXD0, "mii0_txd0"), + PINCTRL_PIN(WMT_PIN_MII0TXD1, "mii0_txd1"), + PINCTRL_PIN(WMT_PIN_MII0TXD2, "mii0_txd2"), + PINCTRL_PIN(WMT_PIN_MII0TXD3, "mii0_txd3"), + PINCTRL_PIN(WMT_PIN_MII0TXCLK, "mii0_txclk"), + PINCTRL_PIN(WMT_PIN_MII0TXEN, "mii0_txen"), + PINCTRL_PIN(WMT_PIN_MII0TXERR, "mii0_txerr"), + PINCTRL_PIN(WMT_PIN_MII0PHYPD, "mii0_phypd"), + PINCTRL_PIN(WMT_PIN_MII0COL, "mii0_col"), + PINCTRL_PIN(WMT_PIN_MII0CRS, "mii0_crs"), + PINCTRL_PIN(WMT_PIN_MII0MDIO, "mii0_mdio"), + PINCTRL_PIN(WMT_PIN_MII0MDC, "mii0_mdc"), + PINCTRL_PIN(WMT_PIN_SEECS, "see_cs"), + PINCTRL_PIN(WMT_PIN_SEECK, "see_ck"), + PINCTRL_PIN(WMT_PIN_SEEDI, "see_di"), + PINCTRL_PIN(WMT_PIN_SEEDO, "see_do"), + PINCTRL_PIN(WMT_PIN_IDEDREQ0, "ide_dreq0"), + PINCTRL_PIN(WMT_PIN_IDEDREQ1, "ide_dreq1"), + PINCTRL_PIN(WMT_PIN_IDEIOW, "ide_iow"), + PINCTRL_PIN(WMT_PIN_IDEIOR, "ide_ior"), + PINCTRL_PIN(WMT_PIN_IDEDACK, "ide_dack"), + PINCTRL_PIN(WMT_PIN_IDEIORDY, "ide_iordy"), + PINCTRL_PIN(WMT_PIN_IDEINTRQ, "ide_intrq"), + PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"), + PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"), + PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"), + PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"), + PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"), + PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"), + PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"), + PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"), + PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"), + PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"), + PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"), + PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"), + PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"), + PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"), + PINCTRL_PIN(WMT_PIN_NANDCLE0, "nand_cle0"), + PINCTRL_PIN(WMT_PIN_NANDCLE1, "nand_cle1"), + PINCTRL_PIN(WMT_PIN_VDOUT6_7, "vdout6_7"), + PINCTRL_PIN(WMT_PIN_VHSYNC, "vhsync"), + PINCTRL_PIN(WMT_PIN_VVSYNC, "vvsync"), + PINCTRL_PIN(WMT_PIN_TSDIN0, "tsdin0"), + PINCTRL_PIN(WMT_PIN_TSDIN1, "tsdin1"), + PINCTRL_PIN(WMT_PIN_TSDIN2, "tsdin2"), + PINCTRL_PIN(WMT_PIN_TSDIN3, "tsdin3"), + PINCTRL_PIN(WMT_PIN_TSDIN4, "tsdin4"), + PINCTRL_PIN(WMT_PIN_TSDIN5, "tsdin5"), + PINCTRL_PIN(WMT_PIN_TSDIN6, "tsdin6"), + PINCTRL_PIN(WMT_PIN_TSDIN7, "tsdin7"), + PINCTRL_PIN(WMT_PIN_TSSYNC, "tssync"), + PINCTRL_PIN(WMT_PIN_TSVALID, "tsvalid"), + PINCTRL_PIN(WMT_PIN_TSCLK, "tsclk"), + PINCTRL_PIN(WMT_PIN_LCDD0, "lcd_d0"), + PINCTRL_PIN(WMT_PIN_LCDD1, "lcd_d1"), + PINCTRL_PIN(WMT_PIN_LCDD2, "lcd_d2"), + PINCTRL_PIN(WMT_PIN_LCDD3, "lcd_d3"), + PINCTRL_PIN(WMT_PIN_LCDD4, "lcd_d4"), + PINCTRL_PIN(WMT_PIN_LCDD5, "lcd_d5"), + PINCTRL_PIN(WMT_PIN_LCDD6, "lcd_d6"), + PINCTRL_PIN(WMT_PIN_LCDD7, "lcd_d7"), + PINCTRL_PIN(WMT_PIN_LCDD8, "lcd_d8"), + PINCTRL_PIN(WMT_PIN_LCDD9, "lcd_d9"), + PINCTRL_PIN(WMT_PIN_LCDD10, "lcd_d10"), + PINCTRL_PIN(WMT_PIN_LCDD11, "lcd_d11"), + PINCTRL_PIN(WMT_PIN_LCDD12, "lcd_d12"), + PINCTRL_PIN(WMT_PIN_LCDD13, "lcd_d13"), + PINCTRL_PIN(WMT_PIN_LCDD14, "lcd_d14"), + PINCTRL_PIN(WMT_PIN_LCDD15, "lcd_d15"), + PINCTRL_PIN(WMT_PIN_LCDD16, "lcd_d16"), + PINCTRL_PIN(WMT_PIN_LCDD17, "lcd_d17"), + PINCTRL_PIN(WMT_PIN_LCDCLK, "lcd_clk"), + PINCTRL_PIN(WMT_PIN_LCDDEN, "lcd_den"), + PINCTRL_PIN(WMT_PIN_LCDLINE, "lcd_line"), + PINCTRL_PIN(WMT_PIN_LCDFRM, "lcd_frm"), + PINCTRL_PIN(WMT_PIN_LCDBIAS, "lcd_bias"), +}; + +/* Order of these names must match the above list */ +static const char * const vt8500_groups[] = { + "extgpio0", + "extgpio1", + "extgpio2", + "extgpio3", + "extgpio4", + "extgpio5", + "extgpio6", + "extgpio7", + "extgpio8", + "uart0_rts", + "uart0_txd", + "uart0_cts", + "uart0_rxd", + "uart1_rts", + "uart1_txd", + "uart1_cts", + "uart1_rxd", + "spi0_clk", + "spi0_ss", + "spi0_miso", + "spi0_mosi", + "spi1_clk", + "spi1_ss", + "spi1_miso", + "spi1_mosi", + "spi2_clk", + "spi2_ss", + "spi2_miso", + "spi2_mosi", + "sd_data0", + "sd_data1", + "sd_data2", + "sd_data3", + "mmc_data0", + "mmc_data1", + "mmc_data2", + "mmc_data3", + "sd_clk", + "sd_wp", + "sd_cmd", + "ms_data0", + "ms_data1", + "ms_data2", + "ms_data3", + "ms_clk", + "ms_bs", + "ms_ins", + "i2c0_scl", + "i2c0_sda", + "i2c1_scl", + "i2c1_sda", + "mii0_rxd0", + "mii0_rxd1", + "mii0_rxd2", + "mii0_rxd3", + "mii0_rxclk", + "mii0_rxdv", + "mii0_rxerr", + "mii0_phyrst", + "mii0_txd0", + "mii0_txd1", + "mii0_txd2", + "mii0_txd3", + "mii0_txclk", + "mii0_txen", + "mii0_txerr", + "mii0_phypd", + "mii0_col", + "mii0_crs", + "mii0_mdio", + "mii0_mdc", + "see_cs", + "see_ck", + "see_di", + "see_do", + "ide_dreq0", + "ide_dreq1", + "ide_iow", + "ide_ior", + "ide_dack", + "ide_iordy", + "ide_intrq", + "vdin0", + "vdin1", + "vdin2", + "vdin3", + "vdin4", + "vdin5", + "vdin6", + "vdin7", + "vdout0", + "vdout1", + "vdout2", + "vdout3", + "vdout4", + "vdout5", + "nand_cle0", + "nand_cle1", + "vdout6_7", + "vhsync", + "vvsync", + "tsdin0", + "tsdin1", + "tsdin2", + "tsdin3", + "tsdin4", + "tsdin5", + "tsdin6", + "tsdin7", + "tssync", + "tsvalid", + "tsclk", + "lcd_d0", + "lcd_d1", + "lcd_d2", + "lcd_d3", + "lcd_d4", + "lcd_d5", + "lcd_d6", + "lcd_d7", + "lcd_d8", + "lcd_d9", + "lcd_d10", + "lcd_d11", + "lcd_d12", + "lcd_d13", + "lcd_d14", + "lcd_d15", + "lcd_d16", + "lcd_d17", + "lcd_clk", + "lcd_den", + "lcd_line", + "lcd_frm", + "lcd_bias", +}; + +static int vt8500_pinctrl_probe(struct platform_device *pdev) +{ + struct wmt_pinctrl_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "failed to allocate data\n"); + return -ENOMEM; + } + + data->banks = vt8500_banks; + data->nbanks = ARRAY_SIZE(vt8500_banks); + data->pins = vt8500_pins; + data->npins = ARRAY_SIZE(vt8500_pins); + data->groups = vt8500_groups; + data->ngroups = ARRAY_SIZE(vt8500_groups); + + return wmt_pinctrl_probe(pdev, data); +} + +static int vt8500_pinctrl_remove(struct platform_device *pdev) +{ + return wmt_pinctrl_remove(pdev); +} + +static struct of_device_id wmt_pinctrl_of_match[] = { + { .compatible = "via,vt8500-pinctrl" }, + { /* sentinel */ }, +}; + +static struct platform_driver wmt_pinctrl_driver = { + .probe = vt8500_pinctrl_probe, + .remove = vt8500_pinctrl_remove, + .driver = { + .name = "pinctrl-vt8500", + .owner = THIS_MODULE, + .of_match_table = wmt_pinctrl_of_match, + }, +}; + +module_platform_driver(wmt_pinctrl_driver); + +MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); +MODULE_DESCRIPTION("VIA VT8500 Pincontrol driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match); diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8505.c b/drivers/pinctrl/vt8500/pinctrl-wm8505.c new file mode 100644 index 000000000000..483ba732694e --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-wm8505.c @@ -0,0 +1,532 @@ +/* + * Pinctrl data for Wondermedia WM8505 SoC + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "pinctrl-wmt.h" + +/* + * Describe the register offsets within the GPIO memory space + * The dedicated external GPIO's should always be listed in bank 0 + * so they are exported in the 0..31 range which is what users + * expect. + * + * Do not reorder these banks as it will change the pin numbering + */ +static const struct wmt_pinctrl_bank_registers wm8505_banks[] = { + WMT_PINCTRL_BANK(0x64, 0x8C, 0xB4, 0xDC, NO_REG, NO_REG), /* 0 */ + WMT_PINCTRL_BANK(0x40, 0x68, 0x90, 0xB8, NO_REG, NO_REG), /* 1 */ + WMT_PINCTRL_BANK(0x44, 0x6C, 0x94, 0xBC, NO_REG, NO_REG), /* 2 */ + WMT_PINCTRL_BANK(0x48, 0x70, 0x98, 0xC0, NO_REG, NO_REG), /* 3 */ + WMT_PINCTRL_BANK(0x4C, 0x74, 0x9C, 0xC4, NO_REG, NO_REG), /* 4 */ + WMT_PINCTRL_BANK(0x50, 0x78, 0xA0, 0xC8, NO_REG, NO_REG), /* 5 */ + WMT_PINCTRL_BANK(0x54, 0x7C, 0xA4, 0xD0, NO_REG, NO_REG), /* 6 */ + WMT_PINCTRL_BANK(0x58, 0x80, 0xA8, 0xD4, NO_REG, NO_REG), /* 7 */ + WMT_PINCTRL_BANK(0x5C, 0x84, 0xAC, 0xD8, NO_REG, NO_REG), /* 8 */ + WMT_PINCTRL_BANK(0x60, 0x88, 0xB0, 0xDC, NO_REG, NO_REG), /* 9 */ + WMT_PINCTRL_BANK(0x500, 0x504, 0x508, 0x50C, NO_REG, NO_REG), /* 10 */ +}; + +/* Please keep sorted by bank/bit */ +#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0) +#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1) +#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2) +#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3) +#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4) +#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5) +#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6) +#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7) +#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16) +#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17) +#define WMT_PIN_WAKEUP2 WMT_PIN(0, 18) +#define WMT_PIN_WAKEUP3 WMT_PIN(0, 19) +#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21) +#define WMT_PIN_SDDATA0 WMT_PIN(1, 0) +#define WMT_PIN_SDDATA1 WMT_PIN(1, 1) +#define WMT_PIN_SDDATA2 WMT_PIN(1, 2) +#define WMT_PIN_SDDATA3 WMT_PIN(1, 3) +#define WMT_PIN_MMCDATA0 WMT_PIN(1, 4) +#define WMT_PIN_MMCDATA1 WMT_PIN(1, 5) +#define WMT_PIN_MMCDATA2 WMT_PIN(1, 6) +#define WMT_PIN_MMCDATA3 WMT_PIN(1, 7) +#define WMT_PIN_VDIN0 WMT_PIN(2, 0) +#define WMT_PIN_VDIN1 WMT_PIN(2, 1) +#define WMT_PIN_VDIN2 WMT_PIN(2, 2) +#define WMT_PIN_VDIN3 WMT_PIN(2, 3) +#define WMT_PIN_VDIN4 WMT_PIN(2, 4) +#define WMT_PIN_VDIN5 WMT_PIN(2, 5) +#define WMT_PIN_VDIN6 WMT_PIN(2, 6) +#define WMT_PIN_VDIN7 WMT_PIN(2, 7) +#define WMT_PIN_VDOUT0 WMT_PIN(2, 8) +#define WMT_PIN_VDOUT1 WMT_PIN(2, 9) +#define WMT_PIN_VDOUT2 WMT_PIN(2, 10) +#define WMT_PIN_VDOUT3 WMT_PIN(2, 11) +#define WMT_PIN_VDOUT4 WMT_PIN(2, 12) +#define WMT_PIN_VDOUT5 WMT_PIN(2, 13) +#define WMT_PIN_VDOUT6 WMT_PIN(2, 14) +#define WMT_PIN_VDOUT7 WMT_PIN(2, 15) +#define WMT_PIN_VDOUT8 WMT_PIN(2, 16) +#define WMT_PIN_VDOUT9 WMT_PIN(2, 17) +#define WMT_PIN_VDOUT10 WMT_PIN(2, 18) +#define WMT_PIN_VDOUT11 WMT_PIN(2, 19) +#define WMT_PIN_VDOUT12 WMT_PIN(2, 20) +#define WMT_PIN_VDOUT13 WMT_PIN(2, 21) +#define WMT_PIN_VDOUT14 WMT_PIN(2, 22) +#define WMT_PIN_VDOUT15 WMT_PIN(2, 23) +#define WMT_PIN_VDOUT16 WMT_PIN(2, 24) +#define WMT_PIN_VDOUT17 WMT_PIN(2, 25) +#define WMT_PIN_VDOUT18 WMT_PIN(2, 26) +#define WMT_PIN_VDOUT19 WMT_PIN(2, 27) +#define WMT_PIN_VDOUT20 WMT_PIN(2, 28) +#define WMT_PIN_VDOUT21 WMT_PIN(2, 29) +#define WMT_PIN_VDOUT22 WMT_PIN(2, 30) +#define WMT_PIN_VDOUT23 WMT_PIN(2, 31) +#define WMT_PIN_VHSYNC WMT_PIN(3, 0) +#define WMT_PIN_VVSYNC WMT_PIN(3, 1) +#define WMT_PIN_VGAHSYNC WMT_PIN(3, 2) +#define WMT_PIN_VGAVSYNC WMT_PIN(3, 3) +#define WMT_PIN_VDHSYNC WMT_PIN(3, 4) +#define WMT_PIN_VDVSYNC WMT_PIN(3, 5) +#define WMT_PIN_NORD0 WMT_PIN(4, 0) +#define WMT_PIN_NORD1 WMT_PIN(4, 1) +#define WMT_PIN_NORD2 WMT_PIN(4, 2) +#define WMT_PIN_NORD3 WMT_PIN(4, 3) +#define WMT_PIN_NORD4 WMT_PIN(4, 4) +#define WMT_PIN_NORD5 WMT_PIN(4, 5) +#define WMT_PIN_NORD6 WMT_PIN(4, 6) +#define WMT_PIN_NORD7 WMT_PIN(4, 7) +#define WMT_PIN_NORD8 WMT_PIN(4, 8) +#define WMT_PIN_NORD9 WMT_PIN(4, 9) +#define WMT_PIN_NORD10 WMT_PIN(4, 10) +#define WMT_PIN_NORD11 WMT_PIN(4, 11) +#define WMT_PIN_NORD12 WMT_PIN(4, 12) +#define WMT_PIN_NORD13 WMT_PIN(4, 13) +#define WMT_PIN_NORD14 WMT_PIN(4, 14) +#define WMT_PIN_NORD15 WMT_PIN(4, 15) +#define WMT_PIN_NORA0 WMT_PIN(5, 0) +#define WMT_PIN_NORA1 WMT_PIN(5, 1) +#define WMT_PIN_NORA2 WMT_PIN(5, 2) +#define WMT_PIN_NORA3 WMT_PIN(5, 3) +#define WMT_PIN_NORA4 WMT_PIN(5, 4) +#define WMT_PIN_NORA5 WMT_PIN(5, 5) +#define WMT_PIN_NORA6 WMT_PIN(5, 6) +#define WMT_PIN_NORA7 WMT_PIN(5, 7) +#define WMT_PIN_NORA8 WMT_PIN(5, 8) +#define WMT_PIN_NORA9 WMT_PIN(5, 9) +#define WMT_PIN_NORA10 WMT_PIN(5, 10) +#define WMT_PIN_NORA11 WMT_PIN(5, 11) +#define WMT_PIN_NORA12 WMT_PIN(5, 12) +#define WMT_PIN_NORA13 WMT_PIN(5, 13) +#define WMT_PIN_NORA14 WMT_PIN(5, 14) +#define WMT_PIN_NORA15 WMT_PIN(5, 15) +#define WMT_PIN_NORA16 WMT_PIN(5, 16) +#define WMT_PIN_NORA17 WMT_PIN(5, 17) +#define WMT_PIN_NORA18 WMT_PIN(5, 18) +#define WMT_PIN_NORA19 WMT_PIN(5, 19) +#define WMT_PIN_NORA20 WMT_PIN(5, 20) +#define WMT_PIN_NORA21 WMT_PIN(5, 21) +#define WMT_PIN_NORA22 WMT_PIN(5, 22) +#define WMT_PIN_NORA23 WMT_PIN(5, 23) +#define WMT_PIN_NORA24 WMT_PIN(5, 24) +#define WMT_PIN_AC97SDI WMT_PIN(6, 0) +#define WMT_PIN_AC97SYNC WMT_PIN(6, 1) +#define WMT_PIN_AC97SDO WMT_PIN(6, 2) +#define WMT_PIN_AC97BCLK WMT_PIN(6, 3) +#define WMT_PIN_AC97RST WMT_PIN(6, 4) +#define WMT_PIN_SFDO WMT_PIN(7, 0) +#define WMT_PIN_SFCS0 WMT_PIN(7, 1) +#define WMT_PIN_SFCS1 WMT_PIN(7, 2) +#define WMT_PIN_SFCLK WMT_PIN(7, 3) +#define WMT_PIN_SFDI WMT_PIN(7, 4) +#define WMT_PIN_SPI0CLK WMT_PIN(8, 0) +#define WMT_PIN_SPI0MISO WMT_PIN(8, 1) +#define WMT_PIN_SPI0MOSI WMT_PIN(8, 2) +#define WMT_PIN_SPI0SS WMT_PIN(8, 3) +#define WMT_PIN_SPI1CLK WMT_PIN(8, 4) +#define WMT_PIN_SPI1MISO WMT_PIN(8, 5) +#define WMT_PIN_SPI1MOSI WMT_PIN(8, 6) +#define WMT_PIN_SPI1SS WMT_PIN(8, 7) +#define WMT_PIN_SPI2CLK WMT_PIN(8, 8) +#define WMT_PIN_SPI2MISO WMT_PIN(8, 9) +#define WMT_PIN_SPI2MOSI WMT_PIN(8, 10) +#define WMT_PIN_SPI2SS WMT_PIN(8, 11) +#define WMT_PIN_UART0_RTS WMT_PIN(9, 0) +#define WMT_PIN_UART0_TXD WMT_PIN(9, 1) +#define WMT_PIN_UART0_CTS WMT_PIN(9, 2) +#define WMT_PIN_UART0_RXD WMT_PIN(9, 3) +#define WMT_PIN_UART1_RTS WMT_PIN(9, 4) +#define WMT_PIN_UART1_TXD WMT_PIN(9, 5) +#define WMT_PIN_UART1_CTS WMT_PIN(9, 6) +#define WMT_PIN_UART1_RXD WMT_PIN(9, 7) +#define WMT_PIN_UART2_RTS WMT_PIN(9, 8) +#define WMT_PIN_UART2_TXD WMT_PIN(9, 9) +#define WMT_PIN_UART2_CTS WMT_PIN(9, 10) +#define WMT_PIN_UART2_RXD WMT_PIN(9, 11) +#define WMT_PIN_UART3_RTS WMT_PIN(9, 12) +#define WMT_PIN_UART3_TXD WMT_PIN(9, 13) +#define WMT_PIN_UART3_CTS WMT_PIN(9, 14) +#define WMT_PIN_UART3_RXD WMT_PIN(9, 15) +#define WMT_PIN_I2C0SCL WMT_PIN(10, 0) +#define WMT_PIN_I2C0SDA WMT_PIN(10, 1) +#define WMT_PIN_I2C1SCL WMT_PIN(10, 2) +#define WMT_PIN_I2C1SDA WMT_PIN(10, 3) +#define WMT_PIN_I2C2SCL WMT_PIN(10, 4) +#define WMT_PIN_I2C2SDA WMT_PIN(10, 5) + +static const struct pinctrl_pin_desc wm8505_pins[] = { + PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"), + PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"), + PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"), + PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"), + PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"), + PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"), + PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"), + PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"), + PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"), + PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"), + PINCTRL_PIN(WMT_PIN_WAKEUP2, "wakeup2"), + PINCTRL_PIN(WMT_PIN_WAKEUP3, "wakeup3"), + PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"), + PINCTRL_PIN(WMT_PIN_SDDATA0, "sd_data0"), + PINCTRL_PIN(WMT_PIN_SDDATA1, "sd_data1"), + PINCTRL_PIN(WMT_PIN_SDDATA2, "sd_data2"), + PINCTRL_PIN(WMT_PIN_SDDATA3, "sd_data3"), + PINCTRL_PIN(WMT_PIN_MMCDATA0, "mmc_data0"), + PINCTRL_PIN(WMT_PIN_MMCDATA1, "mmc_data1"), + PINCTRL_PIN(WMT_PIN_MMCDATA2, "mmc_data2"), + PINCTRL_PIN(WMT_PIN_MMCDATA3, "mmc_data3"), + PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"), + PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"), + PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"), + PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"), + PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"), + PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"), + PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"), + PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"), + PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"), + PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"), + PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"), + PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"), + PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"), + PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"), + PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"), + PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"), + PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"), + PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"), + PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"), + PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"), + PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"), + PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"), + PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"), + PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"), + PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"), + PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"), + PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"), + PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"), + PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"), + PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"), + PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"), + PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"), + PINCTRL_PIN(WMT_PIN_VHSYNC, "v_hsync"), + PINCTRL_PIN(WMT_PIN_VVSYNC, "v_vsync"), + PINCTRL_PIN(WMT_PIN_VGAHSYNC, "vga_hsync"), + PINCTRL_PIN(WMT_PIN_VGAVSYNC, "vga_vsync"), + PINCTRL_PIN(WMT_PIN_VDHSYNC, "vd_hsync"), + PINCTRL_PIN(WMT_PIN_VDVSYNC, "vd_vsync"), + PINCTRL_PIN(WMT_PIN_NORD0, "nor_d0"), + PINCTRL_PIN(WMT_PIN_NORD1, "nor_d1"), + PINCTRL_PIN(WMT_PIN_NORD2, "nor_d2"), + PINCTRL_PIN(WMT_PIN_NORD3, "nor_d3"), + PINCTRL_PIN(WMT_PIN_NORD4, "nor_d4"), + PINCTRL_PIN(WMT_PIN_NORD5, "nor_d5"), + PINCTRL_PIN(WMT_PIN_NORD6, "nor_d6"), + PINCTRL_PIN(WMT_PIN_NORD7, "nor_d7"), + PINCTRL_PIN(WMT_PIN_NORD8, "nor_d8"), + PINCTRL_PIN(WMT_PIN_NORD9, "nor_d9"), + PINCTRL_PIN(WMT_PIN_NORD10, "nor_d10"), + PINCTRL_PIN(WMT_PIN_NORD11, "nor_d11"), + PINCTRL_PIN(WMT_PIN_NORD12, "nor_d12"), + PINCTRL_PIN(WMT_PIN_NORD13, "nor_d13"), + PINCTRL_PIN(WMT_PIN_NORD14, "nor_d14"), + PINCTRL_PIN(WMT_PIN_NORD15, "nor_d15"), + PINCTRL_PIN(WMT_PIN_NORA0, "nor_a0"), + PINCTRL_PIN(WMT_PIN_NORA1, "nor_a1"), + PINCTRL_PIN(WMT_PIN_NORA2, "nor_a2"), + PINCTRL_PIN(WMT_PIN_NORA3, "nor_a3"), + PINCTRL_PIN(WMT_PIN_NORA4, "nor_a4"), + PINCTRL_PIN(WMT_PIN_NORA5, "nor_a5"), + PINCTRL_PIN(WMT_PIN_NORA6, "nor_a6"), + PINCTRL_PIN(WMT_PIN_NORA7, "nor_a7"), + PINCTRL_PIN(WMT_PIN_NORA8, "nor_a8"), + PINCTRL_PIN(WMT_PIN_NORA9, "nor_a9"), + PINCTRL_PIN(WMT_PIN_NORA10, "nor_a10"), + PINCTRL_PIN(WMT_PIN_NORA11, "nor_a11"), + PINCTRL_PIN(WMT_PIN_NORA12, "nor_a12"), + PINCTRL_PIN(WMT_PIN_NORA13, "nor_a13"), + PINCTRL_PIN(WMT_PIN_NORA14, "nor_a14"), + PINCTRL_PIN(WMT_PIN_NORA15, "nor_a15"), + PINCTRL_PIN(WMT_PIN_NORA16, "nor_a16"), + PINCTRL_PIN(WMT_PIN_NORA17, "nor_a17"), + PINCTRL_PIN(WMT_PIN_NORA18, "nor_a18"), + PINCTRL_PIN(WMT_PIN_NORA19, "nor_a19"), + PINCTRL_PIN(WMT_PIN_NORA20, "nor_a20"), + PINCTRL_PIN(WMT_PIN_NORA21, "nor_a21"), + PINCTRL_PIN(WMT_PIN_NORA22, "nor_a22"), + PINCTRL_PIN(WMT_PIN_NORA23, "nor_a23"), + PINCTRL_PIN(WMT_PIN_NORA24, "nor_a24"), + PINCTRL_PIN(WMT_PIN_AC97SDI, "ac97_sdi"), + PINCTRL_PIN(WMT_PIN_AC97SYNC, "ac97_sync"), + PINCTRL_PIN(WMT_PIN_AC97SDO, "ac97_sdo"), + PINCTRL_PIN(WMT_PIN_AC97BCLK, "ac97_bclk"), + PINCTRL_PIN(WMT_PIN_AC97RST, "ac97_rst"), + PINCTRL_PIN(WMT_PIN_SFDO, "sf_do"), + PINCTRL_PIN(WMT_PIN_SFCS0, "sf_cs0"), + PINCTRL_PIN(WMT_PIN_SFCS1, "sf_cs1"), + PINCTRL_PIN(WMT_PIN_SFCLK, "sf_clk"), + PINCTRL_PIN(WMT_PIN_SFDI, "sf_di"), + PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"), + PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"), + PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"), + PINCTRL_PIN(WMT_PIN_SPI0SS, "spi0_ss"), + PINCTRL_PIN(WMT_PIN_SPI1CLK, "spi1_clk"), + PINCTRL_PIN(WMT_PIN_SPI1MISO, "spi1_miso"), + PINCTRL_PIN(WMT_PIN_SPI1MOSI, "spi1_mosi"), + PINCTRL_PIN(WMT_PIN_SPI1SS, "spi1_ss"), + PINCTRL_PIN(WMT_PIN_SPI2CLK, "spi2_clk"), + PINCTRL_PIN(WMT_PIN_SPI2MISO, "spi2_miso"), + PINCTRL_PIN(WMT_PIN_SPI2MOSI, "spi2_mosi"), + PINCTRL_PIN(WMT_PIN_SPI2SS, "spi2_ss"), + PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"), + PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"), + PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"), + PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"), + PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"), + PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"), + PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"), + PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"), + PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"), + PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"), + PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"), + PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"), + PINCTRL_PIN(WMT_PIN_UART3_RTS, "uart3_rts"), + PINCTRL_PIN(WMT_PIN_UART3_TXD, "uart3_txd"), + PINCTRL_PIN(WMT_PIN_UART3_CTS, "uart3_cts"), + PINCTRL_PIN(WMT_PIN_UART3_RXD, "uart3_rxd"), + PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"), + PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"), + PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"), + PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"), + PINCTRL_PIN(WMT_PIN_I2C2SCL, "i2c2_scl"), + PINCTRL_PIN(WMT_PIN_I2C2SDA, "i2c2_sda"), +}; + +/* Order of these names must match the above list */ +static const char * const wm8505_groups[] = { + "extgpio0", + "extgpio1", + "extgpio2", + "extgpio3", + "extgpio4", + "extgpio5", + "extgpio6", + "extgpio7", + "wakeup0", + "wakeup1", + "wakeup2", + "wakeup3", + "susgpio0", + "sd_data0", + "sd_data1", + "sd_data2", + "sd_data3", + "mmc_data0", + "mmc_data1", + "mmc_data2", + "mmc_data3", + "vdin0", + "vdin1", + "vdin2", + "vdin3", + "vdin4", + "vdin5", + "vdin6", + "vdin7", + "vdout0", + "vdout1", + "vdout2", + "vdout3", + "vdout4", + "vdout5", + "vdout6", + "vdout7", + "vdout8", + "vdout9", + "vdout10", + "vdout11", + "vdout12", + "vdout13", + "vdout14", + "vdout15", + "vdout16", + "vdout17", + "vdout18", + "vdout19", + "vdout20", + "vdout21", + "vdout22", + "vdout23", + "v_hsync", + "v_vsync", + "vga_hsync", + "vga_vsync", + "vd_hsync", + "vd_vsync", + "nor_d0", + "nor_d1", + "nor_d2", + "nor_d3", + "nor_d4", + "nor_d5", + "nor_d6", + "nor_d7", + "nor_d8", + "nor_d9", + "nor_d10", + "nor_d11", + "nor_d12", + "nor_d13", + "nor_d14", + "nor_d15", + "nor_a0", + "nor_a1", + "nor_a2", + "nor_a3", + "nor_a4", + "nor_a5", + "nor_a6", + "nor_a7", + "nor_a8", + "nor_a9", + "nor_a10", + "nor_a11", + "nor_a12", + "nor_a13", + "nor_a14", + "nor_a15", + "nor_a16", + "nor_a17", + "nor_a18", + "nor_a19", + "nor_a20", + "nor_a21", + "nor_a22", + "nor_a23", + "nor_a24", + "ac97_sdi", + "ac97_sync", + "ac97_sdo", + "ac97_bclk", + "ac97_rst", + "sf_do", + "sf_cs0", + "sf_cs1", + "sf_clk", + "sf_di", + "spi0_clk", + "spi0_miso", + "spi0_mosi", + "spi0_ss", + "spi1_clk", + "spi1_miso", + "spi1_mosi", + "spi1_ss", + "spi2_clk", + "spi2_miso", + "spi2_mosi", + "spi2_ss", + "uart0_rts", + "uart0_txd", + "uart0_cts", + "uart0_rxd", + "uart1_rts", + "uart1_txd", + "uart1_cts", + "uart1_rxd", + "uart2_rts", + "uart2_txd", + "uart2_cts", + "uart2_rxd", + "uart3_rts", + "uart3_txd", + "uart3_cts", + "uart3_rxd", + "i2c0_scl", + "i2c0_sda", + "i2c1_scl", + "i2c1_sda", + "i2c2_scl", + "i2c2_sda", +}; + +static int wm8505_pinctrl_probe(struct platform_device *pdev) +{ + struct wmt_pinctrl_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "failed to allocate data\n"); + return -ENOMEM; + } + + data->banks = wm8505_banks; + data->nbanks = ARRAY_SIZE(wm8505_banks); + data->pins = wm8505_pins; + data->npins = ARRAY_SIZE(wm8505_pins); + data->groups = wm8505_groups; + data->ngroups = ARRAY_SIZE(wm8505_groups); + + return wmt_pinctrl_probe(pdev, data); +} + +static int wm8505_pinctrl_remove(struct platform_device *pdev) +{ + return wmt_pinctrl_remove(pdev); +} + +static struct of_device_id wmt_pinctrl_of_match[] = { + { .compatible = "wm,wm8505-pinctrl" }, + { /* sentinel */ }, +}; + +static struct platform_driver wmt_pinctrl_driver = { + .probe = wm8505_pinctrl_probe, + .remove = wm8505_pinctrl_remove, + .driver = { + .name = "pinctrl-wm8505", + .owner = THIS_MODULE, + .of_match_table = wmt_pinctrl_of_match, + }, +}; + +module_platform_driver(wmt_pinctrl_driver); + +MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); +MODULE_DESCRIPTION("Wondermedia WM8505 Pincontrol driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match); diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8650.c b/drivers/pinctrl/vt8500/pinctrl-wm8650.c new file mode 100644 index 000000000000..7de57f063153 --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-wm8650.c @@ -0,0 +1,370 @@ +/* + * Pinctrl data for Wondermedia WM8650 SoC + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "pinctrl-wmt.h" + +/* + * Describe the register offsets within the GPIO memory space + * The dedicated external GPIO's should always be listed in bank 0 + * so they are exported in the 0..31 range which is what users + * expect. + * + * Do not reorder these banks as it will change the pin numbering + */ +static const struct wmt_pinctrl_bank_registers wm8650_banks[] = { + WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */ + WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */ + WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */ + WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */ + WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */ + WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */ + WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */ + WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */ +}; + +/* Please keep sorted by bank/bit */ +#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0) +#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1) +#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2) +#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3) +#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4) +#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5) +#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6) +#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7) +#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16) +#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17) +#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21) +#define WMT_PIN_SD0CD WMT_PIN(0, 28) +#define WMT_PIN_SD1CD WMT_PIN(0, 29) +#define WMT_PIN_VDOUT0 WMT_PIN(1, 0) +#define WMT_PIN_VDOUT1 WMT_PIN(1, 1) +#define WMT_PIN_VDOUT2 WMT_PIN(1, 2) +#define WMT_PIN_VDOUT3 WMT_PIN(1, 3) +#define WMT_PIN_VDOUT4 WMT_PIN(1, 4) +#define WMT_PIN_VDOUT5 WMT_PIN(1, 5) +#define WMT_PIN_VDOUT6 WMT_PIN(1, 6) +#define WMT_PIN_VDOUT7 WMT_PIN(1, 7) +#define WMT_PIN_VDOUT8 WMT_PIN(1, 8) +#define WMT_PIN_VDOUT9 WMT_PIN(1, 9) +#define WMT_PIN_VDOUT10 WMT_PIN(1, 10) +#define WMT_PIN_VDOUT11 WMT_PIN(1, 11) +#define WMT_PIN_VDOUT12 WMT_PIN(1, 12) +#define WMT_PIN_VDOUT13 WMT_PIN(1, 13) +#define WMT_PIN_VDOUT14 WMT_PIN(1, 14) +#define WMT_PIN_VDOUT15 WMT_PIN(1, 15) +#define WMT_PIN_VDOUT16 WMT_PIN(1, 16) +#define WMT_PIN_VDOUT17 WMT_PIN(1, 17) +#define WMT_PIN_VDOUT18 WMT_PIN(1, 18) +#define WMT_PIN_VDOUT19 WMT_PIN(1, 19) +#define WMT_PIN_VDOUT20 WMT_PIN(1, 20) +#define WMT_PIN_VDOUT21 WMT_PIN(1, 21) +#define WMT_PIN_VDOUT22 WMT_PIN(1, 22) +#define WMT_PIN_VDOUT23 WMT_PIN(1, 23) +#define WMT_PIN_VDIN0 WMT_PIN(2, 0) +#define WMT_PIN_VDIN1 WMT_PIN(2, 1) +#define WMT_PIN_VDIN2 WMT_PIN(2, 2) +#define WMT_PIN_VDIN3 WMT_PIN(2, 3) +#define WMT_PIN_VDIN4 WMT_PIN(2, 4) +#define WMT_PIN_VDIN5 WMT_PIN(2, 5) +#define WMT_PIN_VDIN6 WMT_PIN(2, 6) +#define WMT_PIN_VDIN7 WMT_PIN(2, 7) +#define WMT_PIN_I2C1SCL WMT_PIN(2, 12) +#define WMT_PIN_I2C1SDA WMT_PIN(2, 13) +#define WMT_PIN_SPI0MOSI WMT_PIN(2, 24) +#define WMT_PIN_SPI0MISO WMT_PIN(2, 25) +#define WMT_PIN_SPI0SS0 WMT_PIN(2, 26) +#define WMT_PIN_SPI0CLK WMT_PIN(2, 27) +#define WMT_PIN_SD0DATA0 WMT_PIN(3, 8) +#define WMT_PIN_SD0DATA1 WMT_PIN(3, 9) +#define WMT_PIN_SD0DATA2 WMT_PIN(3, 10) +#define WMT_PIN_SD0DATA3 WMT_PIN(3, 11) +#define WMT_PIN_SD0CLK WMT_PIN(3, 12) +#define WMT_PIN_SD0WP WMT_PIN(3, 13) +#define WMT_PIN_SD0CMD WMT_PIN(3, 14) +#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24) +#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25) +#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26) +#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27) +#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28) +#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29) +#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30) +#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31) +#define WMT_PIN_I2C0SCL WMT_PIN(5, 8) +#define WMT_PIN_I2C0SDA WMT_PIN(5, 9) +#define WMT_PIN_UART0RTS WMT_PIN(5, 16) +#define WMT_PIN_UART0TXD WMT_PIN(5, 17) +#define WMT_PIN_UART0CTS WMT_PIN(5, 18) +#define WMT_PIN_UART0RXD WMT_PIN(5, 19) +#define WMT_PIN_UART1RTS WMT_PIN(5, 20) +#define WMT_PIN_UART1TXD WMT_PIN(5, 21) +#define WMT_PIN_UART1CTS WMT_PIN(5, 22) +#define WMT_PIN_UART1RXD WMT_PIN(5, 23) +#define WMT_PIN_UART2RTS WMT_PIN(5, 24) +#define WMT_PIN_UART2TXD WMT_PIN(5, 25) +#define WMT_PIN_UART2CTS WMT_PIN(5, 26) +#define WMT_PIN_UART2RXD WMT_PIN(5, 27) +#define WMT_PIN_UART3RTS WMT_PIN(5, 28) +#define WMT_PIN_UART3TXD WMT_PIN(5, 29) +#define WMT_PIN_UART3CTS WMT_PIN(5, 30) +#define WMT_PIN_UART3RXD WMT_PIN(5, 31) +#define WMT_PIN_KPADROW0 WMT_PIN(6, 16) +#define WMT_PIN_KPADROW1 WMT_PIN(6, 17) +#define WMT_PIN_KPADCOL0 WMT_PIN(6, 18) +#define WMT_PIN_KPADCOL1 WMT_PIN(6, 19) +#define WMT_PIN_SD1CLK WMT_PIN(7, 0) +#define WMT_PIN_SD1CMD WMT_PIN(7, 1) +#define WMT_PIN_SD1WP WMT_PIN(7, 13) + +static const struct pinctrl_pin_desc wm8650_pins[] = { + PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"), + PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"), + PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"), + PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"), + PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"), + PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"), + PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"), + PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"), + PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"), + PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"), + PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"), + PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"), + PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"), + PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"), + PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"), + PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"), + PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"), + PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"), + PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"), + PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"), + PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"), + PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"), + PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"), + PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"), + PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"), + PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"), + PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"), + PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"), + PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"), + PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"), + PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"), + PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"), + PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"), + PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"), + PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"), + PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"), + PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"), + PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"), + PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"), + PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"), + PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"), + PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"), + PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"), + PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"), + PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"), + PINCTRL_PIN(WMT_PIN_I2C1SCL, "i2c1_scl"), + PINCTRL_PIN(WMT_PIN_I2C1SDA, "i2c1_sda"), + PINCTRL_PIN(WMT_PIN_SPI0MOSI, "spi0_mosi"), + PINCTRL_PIN(WMT_PIN_SPI0MISO, "spi0_miso"), + PINCTRL_PIN(WMT_PIN_SPI0SS0, "spi0_ss0"), + PINCTRL_PIN(WMT_PIN_SPI0CLK, "spi0_clk"), + PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"), + PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"), + PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"), + PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"), + PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"), + PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"), + PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"), + PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"), + PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"), + PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"), + PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"), + PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"), + PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"), + PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"), + PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"), + PINCTRL_PIN(WMT_PIN_I2C0SCL, "i2c0_scl"), + PINCTRL_PIN(WMT_PIN_I2C0SDA, "i2c0_sda"), + PINCTRL_PIN(WMT_PIN_UART0RTS, "uart0_rts"), + PINCTRL_PIN(WMT_PIN_UART0TXD, "uart0_txd"), + PINCTRL_PIN(WMT_PIN_UART0CTS, "uart0_cts"), + PINCTRL_PIN(WMT_PIN_UART0RXD, "uart0_rxd"), + PINCTRL_PIN(WMT_PIN_UART1RTS, "uart1_rts"), + PINCTRL_PIN(WMT_PIN_UART1TXD, "uart1_txd"), + PINCTRL_PIN(WMT_PIN_UART1CTS, "uart1_cts"), + PINCTRL_PIN(WMT_PIN_UART1RXD, "uart1_rxd"), + PINCTRL_PIN(WMT_PIN_UART2RTS, "uart2_rts"), + PINCTRL_PIN(WMT_PIN_UART2TXD, "uart2_txd"), + PINCTRL_PIN(WMT_PIN_UART2CTS, "uart2_cts"), + PINCTRL_PIN(WMT_PIN_UART2RXD, "uart2_rxd"), + PINCTRL_PIN(WMT_PIN_UART3RTS, "uart3_rts"), + PINCTRL_PIN(WMT_PIN_UART3TXD, "uart3_txd"), + PINCTRL_PIN(WMT_PIN_UART3CTS, "uart3_cts"), + PINCTRL_PIN(WMT_PIN_UART3RXD, "uart3_rxd"), + PINCTRL_PIN(WMT_PIN_KPADROW0, "kpadrow0"), + PINCTRL_PIN(WMT_PIN_KPADROW1, "kpadrow1"), + PINCTRL_PIN(WMT_PIN_KPADCOL0, "kpadcol0"), + PINCTRL_PIN(WMT_PIN_KPADCOL1, "kpadcol1"), + PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"), + PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"), + PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"), +}; + +/* Order of these names must match the above list */ +static const char * const wm8650_groups[] = { + "extgpio0", + "extgpio1", + "extgpio2", + "extgpio3", + "extgpio4", + "extgpio5", + "extgpio6", + "extgpio7", + "wakeup0", + "wakeup1", + "susgpio0", + "sd0_cd", + "sd1_cd", + "vdout0", + "vdout1", + "vdout2", + "vdout3", + "vdout4", + "vdout5", + "vdout6", + "vdout7", + "vdout8", + "vdout9", + "vdout10", + "vdout11", + "vdout12", + "vdout13", + "vdout14", + "vdout15", + "vdout16", + "vdout17", + "vdout18", + "vdout19", + "vdout20", + "vdout21", + "vdout22", + "vdout23", + "vdin0", + "vdin1", + "vdin2", + "vdin3", + "vdin4", + "vdin5", + "vdin6", + "vdin7", + "i2c1_scl", + "i2c1_sda", + "spi0_mosi", + "spi0_miso", + "spi0_ss0", + "spi0_clk", + "sd0_data0", + "sd0_data1", + "sd0_data2", + "sd0_data3", + "sd0_clk", + "sd0_wp", + "sd0_cmd", + "sd1_data0", + "sd1_data1", + "sd1_data2", + "sd1_data3", + "sd1_data4", + "sd1_data5", + "sd1_data6", + "sd1_data7", + "i2c0_scl", + "i2c0_sda", + "uart0_rts", + "uart0_txd", + "uart0_cts", + "uart0_rxd", + "uart1_rts", + "uart1_txd", + "uart1_cts", + "uart1_rxd", + "uart2_rts", + "uart2_txd", + "uart2_cts", + "uart2_rxd", + "uart3_rts", + "uart3_txd", + "uart3_cts", + "uart3_rxd", + "kpadrow0", + "kpadrow1", + "kpadcol0", + "kpadcol1", + "sd1_clk", + "sd1_cmd", + "sd1_wp", +}; + +static int wm8650_pinctrl_probe(struct platform_device *pdev) +{ + struct wmt_pinctrl_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "failed to allocate data\n"); + return -ENOMEM; + } + + data->banks = wm8650_banks; + data->nbanks = ARRAY_SIZE(wm8650_banks); + data->pins = wm8650_pins; + data->npins = ARRAY_SIZE(wm8650_pins); + data->groups = wm8650_groups; + data->ngroups = ARRAY_SIZE(wm8650_groups); + + return wmt_pinctrl_probe(pdev, data); +} + +static int wm8650_pinctrl_remove(struct platform_device *pdev) +{ + return wmt_pinctrl_remove(pdev); +} + +static struct of_device_id wmt_pinctrl_of_match[] = { + { .compatible = "wm,wm8650-pinctrl" }, + { /* sentinel */ }, +}; + +static struct platform_driver wmt_pinctrl_driver = { + .probe = wm8650_pinctrl_probe, + .remove = wm8650_pinctrl_remove, + .driver = { + .name = "pinctrl-wm8650", + .owner = THIS_MODULE, + .of_match_table = wmt_pinctrl_of_match, + }, +}; + +module_platform_driver(wmt_pinctrl_driver); + +MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); +MODULE_DESCRIPTION("Wondermedia WM8650 Pincontrol driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match); diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8750.c b/drivers/pinctrl/vt8500/pinctrl-wm8750.c new file mode 100644 index 000000000000..b964cc550568 --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-wm8750.c @@ -0,0 +1,409 @@ +/* + * Pinctrl data for Wondermedia WM8750 SoC + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "pinctrl-wmt.h" + +/* + * Describe the register offsets within the GPIO memory space + * The dedicated external GPIO's should always be listed in bank 0 + * so they are exported in the 0..31 range which is what users + * expect. + * + * Do not reorder these banks as it will change the pin numbering + */ +static const struct wmt_pinctrl_bank_registers wm8750_banks[] = { + WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */ + WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */ + WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */ + WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */ + WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */ + WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */ + WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */ + WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */ + WMT_PINCTRL_BANK(0x60, 0xA0, 0xE0, 0x20, 0x4A0, 0x4E0), /* 8 */ + WMT_PINCTRL_BANK(0x70, 0xB0, 0xF0, 0x30, 0x4B0, 0x4F0), /* 9 */ + WMT_PINCTRL_BANK(0x7C, 0xBC, 0xDC, 0x3C, 0x4BC, 0x4FC), /* 10 */ +}; + +/* Please keep sorted by bank/bit */ +#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0) +#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1) +#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2) +#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3) +#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4) +#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5) +#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6) +#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7) +#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16) +#define WMT_PIN_WAKEUP1 WMT_PIN(0, 16) +#define WMT_PIN_SD0CD WMT_PIN(0, 28) +#define WMT_PIN_VDOUT0 WMT_PIN(1, 0) +#define WMT_PIN_VDOUT1 WMT_PIN(1, 1) +#define WMT_PIN_VDOUT2 WMT_PIN(1, 2) +#define WMT_PIN_VDOUT3 WMT_PIN(1, 3) +#define WMT_PIN_VDOUT4 WMT_PIN(1, 4) +#define WMT_PIN_VDOUT5 WMT_PIN(1, 5) +#define WMT_PIN_VDOUT6 WMT_PIN(1, 6) +#define WMT_PIN_VDOUT7 WMT_PIN(1, 7) +#define WMT_PIN_VDOUT8 WMT_PIN(1, 8) +#define WMT_PIN_VDOUT9 WMT_PIN(1, 9) +#define WMT_PIN_VDOUT10 WMT_PIN(1, 10) +#define WMT_PIN_VDOUT11 WMT_PIN(1, 11) +#define WMT_PIN_VDOUT12 WMT_PIN(1, 12) +#define WMT_PIN_VDOUT13 WMT_PIN(1, 13) +#define WMT_PIN_VDOUT14 WMT_PIN(1, 14) +#define WMT_PIN_VDOUT15 WMT_PIN(1, 15) +#define WMT_PIN_VDOUT16 WMT_PIN(1, 16) +#define WMT_PIN_VDOUT17 WMT_PIN(1, 17) +#define WMT_PIN_VDOUT18 WMT_PIN(1, 18) +#define WMT_PIN_VDOUT19 WMT_PIN(1, 19) +#define WMT_PIN_VDOUT20 WMT_PIN(1, 20) +#define WMT_PIN_VDOUT21 WMT_PIN(1, 21) +#define WMT_PIN_VDOUT22 WMT_PIN(1, 22) +#define WMT_PIN_VDOUT23 WMT_PIN(1, 23) +#define WMT_PIN_VDIN0 WMT_PIN(2, 0) +#define WMT_PIN_VDIN1 WMT_PIN(2, 1) +#define WMT_PIN_VDIN2 WMT_PIN(2, 2) +#define WMT_PIN_VDIN3 WMT_PIN(2, 3) +#define WMT_PIN_VDIN4 WMT_PIN(2, 4) +#define WMT_PIN_VDIN5 WMT_PIN(2, 5) +#define WMT_PIN_VDIN6 WMT_PIN(2, 6) +#define WMT_PIN_VDIN7 WMT_PIN(2, 7) +#define WMT_PIN_SPI0_MOSI WMT_PIN(2, 24) +#define WMT_PIN_SPI0_MISO WMT_PIN(2, 25) +#define WMT_PIN_SPI0_SS WMT_PIN(2, 26) +#define WMT_PIN_SPI0_CLK WMT_PIN(2, 27) +#define WMT_PIN_SPI0_SSB WMT_PIN(2, 28) +#define WMT_PIN_SD0CLK WMT_PIN(3, 17) +#define WMT_PIN_SD0CMD WMT_PIN(3, 18) +#define WMT_PIN_SD0WP WMT_PIN(3, 19) +#define WMT_PIN_SD0DATA0 WMT_PIN(3, 20) +#define WMT_PIN_SD0DATA1 WMT_PIN(3, 21) +#define WMT_PIN_SD0DATA2 WMT_PIN(3, 22) +#define WMT_PIN_SD0DATA3 WMT_PIN(3, 23) +#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24) +#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25) +#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26) +#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27) +#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28) +#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29) +#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30) +#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31) +#define WMT_PIN_I2C0_SCL WMT_PIN(5, 8) +#define WMT_PIN_I2C0_SDA WMT_PIN(5, 9) +#define WMT_PIN_I2C1_SCL WMT_PIN(5, 10) +#define WMT_PIN_I2C1_SDA WMT_PIN(5, 11) +#define WMT_PIN_I2C2_SCL WMT_PIN(5, 12) +#define WMT_PIN_I2C2_SDA WMT_PIN(5, 13) +#define WMT_PIN_UART0_RTS WMT_PIN(5, 16) +#define WMT_PIN_UART0_TXD WMT_PIN(5, 17) +#define WMT_PIN_UART0_CTS WMT_PIN(5, 18) +#define WMT_PIN_UART0_RXD WMT_PIN(5, 19) +#define WMT_PIN_UART1_RTS WMT_PIN(5, 20) +#define WMT_PIN_UART1_TXD WMT_PIN(5, 21) +#define WMT_PIN_UART1_CTS WMT_PIN(5, 22) +#define WMT_PIN_UART1_RXD WMT_PIN(5, 23) +#define WMT_PIN_UART2_RTS WMT_PIN(5, 24) +#define WMT_PIN_UART2_TXD WMT_PIN(5, 25) +#define WMT_PIN_UART2_CTS WMT_PIN(5, 26) +#define WMT_PIN_UART2_RXD WMT_PIN(5, 27) +#define WMT_PIN_UART3_RTS WMT_PIN(5, 28) +#define WMT_PIN_UART3_TXD WMT_PIN(5, 29) +#define WMT_PIN_UART3_CTS WMT_PIN(5, 30) +#define WMT_PIN_UART3_RXD WMT_PIN(5, 31) +#define WMT_PIN_SD2CD WMT_PIN(6, 0) +#define WMT_PIN_SD2DATA3 WMT_PIN(6, 1) +#define WMT_PIN_SD2DATA0 WMT_PIN(6, 2) +#define WMT_PIN_SD2WP WMT_PIN(6, 3) +#define WMT_PIN_SD2DATA1 WMT_PIN(6, 4) +#define WMT_PIN_SD2DATA2 WMT_PIN(6, 5) +#define WMT_PIN_SD2CMD WMT_PIN(6, 6) +#define WMT_PIN_SD2CLK WMT_PIN(6, 7) +#define WMT_PIN_SD2PWR WMT_PIN(6, 9) +#define WMT_PIN_SD1CLK WMT_PIN(7, 0) +#define WMT_PIN_SD1CMD WMT_PIN(7, 1) +#define WMT_PIN_SD1PWR WMT_PIN(7, 10) +#define WMT_PIN_SD1WP WMT_PIN(7, 11) +#define WMT_PIN_SD1CD WMT_PIN(7, 12) +#define WMT_PIN_SPI0SS3 WMT_PIN(7, 24) +#define WMT_PIN_SPI0SS2 WMT_PIN(7, 25) +#define WMT_PIN_PWMOUT1 WMT_PIN(7, 26) +#define WMT_PIN_PWMOUT0 WMT_PIN(7, 27) + +static const struct pinctrl_pin_desc wm8750_pins[] = { + PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"), + PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"), + PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"), + PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"), + PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"), + PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"), + PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"), + PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"), + PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"), + PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"), + PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"), + PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"), + PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"), + PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"), + PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"), + PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"), + PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"), + PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"), + PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"), + PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"), + PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"), + PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"), + PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"), + PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"), + PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"), + PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"), + PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"), + PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"), + PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"), + PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"), + PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"), + PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"), + PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"), + PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"), + PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"), + PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"), + PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"), + PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"), + PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"), + PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"), + PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"), + PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"), + PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"), + PINCTRL_PIN(WMT_PIN_SPI0_MOSI, "spi0_mosi"), + PINCTRL_PIN(WMT_PIN_SPI0_MISO, "spi0_miso"), + PINCTRL_PIN(WMT_PIN_SPI0_SS, "spi0_ss"), + PINCTRL_PIN(WMT_PIN_SPI0_CLK, "spi0_clk"), + PINCTRL_PIN(WMT_PIN_SPI0_SSB, "spi0_ssb"), + PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"), + PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"), + PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"), + PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"), + PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"), + PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"), + PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"), + PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"), + PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"), + PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"), + PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"), + PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"), + PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"), + PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"), + PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"), + PINCTRL_PIN(WMT_PIN_I2C0_SCL, "i2c0_scl"), + PINCTRL_PIN(WMT_PIN_I2C0_SDA, "i2c0_sda"), + PINCTRL_PIN(WMT_PIN_I2C1_SCL, "i2c1_scl"), + PINCTRL_PIN(WMT_PIN_I2C1_SDA, "i2c1_sda"), + PINCTRL_PIN(WMT_PIN_I2C2_SCL, "i2c2_scl"), + PINCTRL_PIN(WMT_PIN_I2C2_SDA, "i2c2_sda"), + PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"), + PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"), + PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"), + PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"), + PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"), + PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"), + PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"), + PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"), + PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"), + PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"), + PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"), + PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"), + PINCTRL_PIN(WMT_PIN_UART3_RTS, "uart3_rts"), + PINCTRL_PIN(WMT_PIN_UART3_TXD, "uart3_txd"), + PINCTRL_PIN(WMT_PIN_UART3_CTS, "uart3_cts"), + PINCTRL_PIN(WMT_PIN_UART3_RXD, "uart3_rxd"), + PINCTRL_PIN(WMT_PIN_SD2CD, "sd2_cd"), + PINCTRL_PIN(WMT_PIN_SD2DATA3, "sd2_data3"), + PINCTRL_PIN(WMT_PIN_SD2DATA0, "sd2_data0"), + PINCTRL_PIN(WMT_PIN_SD2WP, "sd2_wp"), + PINCTRL_PIN(WMT_PIN_SD2DATA1, "sd2_data1"), + PINCTRL_PIN(WMT_PIN_SD2DATA2, "sd2_data2"), + PINCTRL_PIN(WMT_PIN_SD2CMD, "sd2_cmd"), + PINCTRL_PIN(WMT_PIN_SD2CLK, "sd2_clk"), + PINCTRL_PIN(WMT_PIN_SD2PWR, "sd2_pwr"), + PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"), + PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"), + PINCTRL_PIN(WMT_PIN_SD1PWR, "sd1_pwr"), + PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"), + PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"), + PINCTRL_PIN(WMT_PIN_SPI0SS3, "spi0_ss3"), + PINCTRL_PIN(WMT_PIN_SPI0SS2, "spi0_ss2"), + PINCTRL_PIN(WMT_PIN_PWMOUT1, "pwmout1"), + PINCTRL_PIN(WMT_PIN_PWMOUT0, "pwmout0"), +}; + +/* Order of these names must match the above list */ +static const char * const wm8750_groups[] = { + "extgpio0", + "extgpio1", + "extgpio2", + "extgpio3", + "extgpio4", + "extgpio5", + "extgpio6", + "extgpio7", + "wakeup0", + "wakeup1", + "sd0_cd", + "vdout0", + "vdout1", + "vdout2", + "vdout3", + "vdout4", + "vdout5", + "vdout6", + "vdout7", + "vdout8", + "vdout9", + "vdout10", + "vdout11", + "vdout12", + "vdout13", + "vdout14", + "vdout15", + "vdout16", + "vdout17", + "vdout18", + "vdout19", + "vdout20", + "vdout21", + "vdout22", + "vdout23", + "vdin0", + "vdin1", + "vdin2", + "vdin3", + "vdin4", + "vdin5", + "vdin6", + "vdin7", + "spi0_mosi", + "spi0_miso", + "spi0_ss", + "spi0_clk", + "spi0_ssb", + "sd0_clk", + "sd0_cmd", + "sd0_wp", + "sd0_data0", + "sd0_data1", + "sd0_data2", + "sd0_data3", + "sd1_data0", + "sd1_data1", + "sd1_data2", + "sd1_data3", + "sd1_data4", + "sd1_data5", + "sd1_data6", + "sd1_data7", + "i2c0_scl", + "i2c0_sda", + "i2c1_scl", + "i2c1_sda", + "i2c2_scl", + "i2c2_sda", + "uart0_rts", + "uart0_txd", + "uart0_cts", + "uart0_rxd", + "uart1_rts", + "uart1_txd", + "uart1_cts", + "uart1_rxd", + "uart2_rts", + "uart2_txd", + "uart2_cts", + "uart2_rxd", + "uart3_rts", + "uart3_txd", + "uart3_cts", + "uart3_rxd", + "sd2_cd", + "sd2_data3", + "sd2_data0", + "sd2_wp", + "sd2_data1", + "sd2_data2", + "sd2_cmd", + "sd2_clk", + "sd2_pwr", + "sd1_clk", + "sd1_cmd", + "sd1_pwr", + "sd1_wp", + "sd1_cd", + "spi0_ss3", + "spi0_ss2", + "pwmout1", + "pwmout0", +}; + +static int wm8750_pinctrl_probe(struct platform_device *pdev) +{ + struct wmt_pinctrl_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "failed to allocate data\n"); + return -ENOMEM; + } + + data->banks = wm8750_banks; + data->nbanks = ARRAY_SIZE(wm8750_banks); + data->pins = wm8750_pins; + data->npins = ARRAY_SIZE(wm8750_pins); + data->groups = wm8750_groups; + data->ngroups = ARRAY_SIZE(wm8750_groups); + + return wmt_pinctrl_probe(pdev, data); +} + +static int wm8750_pinctrl_remove(struct platform_device *pdev) +{ + return wmt_pinctrl_remove(pdev); +} + +static struct of_device_id wmt_pinctrl_of_match[] = { + { .compatible = "wm,wm8750-pinctrl" }, + { /* sentinel */ }, +}; + +static struct platform_driver wmt_pinctrl_driver = { + .probe = wm8750_pinctrl_probe, + .remove = wm8750_pinctrl_remove, + .driver = { + .name = "pinctrl-wm8750", + .owner = THIS_MODULE, + .of_match_table = wmt_pinctrl_of_match, + }, +}; + +module_platform_driver(wmt_pinctrl_driver); + +MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); +MODULE_DESCRIPTION("Wondermedia WM8750 Pincontrol driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match); diff --git a/drivers/pinctrl/vt8500/pinctrl-wm8850.c b/drivers/pinctrl/vt8500/pinctrl-wm8850.c new file mode 100644 index 000000000000..ecadce9c91d5 --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-wm8850.c @@ -0,0 +1,388 @@ +/* + * Pinctrl data for Wondermedia WM8850 SoC + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "pinctrl-wmt.h" + +/* + * Describe the register offsets within the GPIO memory space + * The dedicated external GPIO's should always be listed in bank 0 + * so they are exported in the 0..31 range which is what users + * expect. + * + * Do not reorder these banks as it will change the pin numbering + */ +static const struct wmt_pinctrl_bank_registers wm8850_banks[] = { + WMT_PINCTRL_BANK(0x40, 0x80, 0xC0, 0x00, 0x480, 0x4C0), /* 0 */ + WMT_PINCTRL_BANK(0x44, 0x84, 0xC4, 0x04, 0x484, 0x4C4), /* 1 */ + WMT_PINCTRL_BANK(0x48, 0x88, 0xC8, 0x08, 0x488, 0x4C8), /* 2 */ + WMT_PINCTRL_BANK(0x4C, 0x8C, 0xCC, 0x0C, 0x48C, 0x4CC), /* 3 */ + WMT_PINCTRL_BANK(0x50, 0x90, 0xD0, 0x10, 0x490, 0x4D0), /* 4 */ + WMT_PINCTRL_BANK(0x54, 0x94, 0xD4, 0x14, 0x494, 0x4D4), /* 5 */ + WMT_PINCTRL_BANK(0x58, 0x98, 0xD8, 0x18, 0x498, 0x4D8), /* 6 */ + WMT_PINCTRL_BANK(0x5C, 0x9C, 0xDC, 0x1C, 0x49C, 0x4DC), /* 7 */ + WMT_PINCTRL_BANK(0x60, 0xA0, 0xE0, 0x20, 0x4A0, 0x4E0), /* 8 */ + WMT_PINCTRL_BANK(0x70, 0xB0, 0xF0, 0x30, 0x4B0, 0x4F0), /* 9 */ + WMT_PINCTRL_BANK(0x7C, 0xBC, 0xDC, 0x3C, 0x4BC, 0x4FC), /* 10 */ +}; + +/* Please keep sorted by bank/bit */ +#define WMT_PIN_EXTGPIO0 WMT_PIN(0, 0) +#define WMT_PIN_EXTGPIO1 WMT_PIN(0, 1) +#define WMT_PIN_EXTGPIO2 WMT_PIN(0, 2) +#define WMT_PIN_EXTGPIO3 WMT_PIN(0, 3) +#define WMT_PIN_EXTGPIO4 WMT_PIN(0, 4) +#define WMT_PIN_EXTGPIO5 WMT_PIN(0, 5) +#define WMT_PIN_EXTGPIO6 WMT_PIN(0, 6) +#define WMT_PIN_EXTGPIO7 WMT_PIN(0, 7) +#define WMT_PIN_WAKEUP0 WMT_PIN(0, 16) +#define WMT_PIN_WAKEUP1 WMT_PIN(0, 17) +#define WMT_PIN_WAKEUP2 WMT_PIN(0, 18) +#define WMT_PIN_WAKEUP3 WMT_PIN(0, 19) +#define WMT_PIN_SUSGPIO0 WMT_PIN(0, 21) +#define WMT_PIN_SUSGPIO1 WMT_PIN(0, 22) +#define WMT_PIN_SD0CD WMT_PIN(0, 28) +#define WMT_PIN_VDOUT0 WMT_PIN(1, 0) +#define WMT_PIN_VDOUT1 WMT_PIN(1, 1) +#define WMT_PIN_VDOUT2 WMT_PIN(1, 2) +#define WMT_PIN_VDOUT3 WMT_PIN(1, 3) +#define WMT_PIN_VDOUT4 WMT_PIN(1, 4) +#define WMT_PIN_VDOUT5 WMT_PIN(1, 5) +#define WMT_PIN_VDOUT6 WMT_PIN(1, 6) +#define WMT_PIN_VDOUT7 WMT_PIN(1, 7) +#define WMT_PIN_VDOUT8 WMT_PIN(1, 8) +#define WMT_PIN_VDOUT9 WMT_PIN(1, 9) +#define WMT_PIN_VDOUT10 WMT_PIN(1, 10) +#define WMT_PIN_VDOUT11 WMT_PIN(1, 11) +#define WMT_PIN_VDOUT12 WMT_PIN(1, 12) +#define WMT_PIN_VDOUT13 WMT_PIN(1, 13) +#define WMT_PIN_VDOUT14 WMT_PIN(1, 14) +#define WMT_PIN_VDOUT15 WMT_PIN(1, 15) +#define WMT_PIN_VDOUT16 WMT_PIN(1, 16) +#define WMT_PIN_VDOUT17 WMT_PIN(1, 17) +#define WMT_PIN_VDOUT18 WMT_PIN(1, 18) +#define WMT_PIN_VDOUT19 WMT_PIN(1, 19) +#define WMT_PIN_VDOUT20 WMT_PIN(1, 20) +#define WMT_PIN_VDOUT21 WMT_PIN(1, 21) +#define WMT_PIN_VDOUT22 WMT_PIN(1, 22) +#define WMT_PIN_VDOUT23 WMT_PIN(1, 23) +#define WMT_PIN_VDIN0 WMT_PIN(2, 0) +#define WMT_PIN_VDIN1 WMT_PIN(2, 1) +#define WMT_PIN_VDIN2 WMT_PIN(2, 2) +#define WMT_PIN_VDIN3 WMT_PIN(2, 3) +#define WMT_PIN_VDIN4 WMT_PIN(2, 4) +#define WMT_PIN_VDIN5 WMT_PIN(2, 5) +#define WMT_PIN_VDIN6 WMT_PIN(2, 6) +#define WMT_PIN_VDIN7 WMT_PIN(2, 7) +#define WMT_PIN_SPI0_MOSI WMT_PIN(2, 24) +#define WMT_PIN_SPI0_MISO WMT_PIN(2, 25) +#define WMT_PIN_SPI0_SS WMT_PIN(2, 26) +#define WMT_PIN_SPI0_CLK WMT_PIN(2, 27) +#define WMT_PIN_SPI0_SSB WMT_PIN(2, 28) +#define WMT_PIN_SD0CLK WMT_PIN(3, 17) +#define WMT_PIN_SD0CMD WMT_PIN(3, 18) +#define WMT_PIN_SD0WP WMT_PIN(3, 19) +#define WMT_PIN_SD0DATA0 WMT_PIN(3, 20) +#define WMT_PIN_SD0DATA1 WMT_PIN(3, 21) +#define WMT_PIN_SD0DATA2 WMT_PIN(3, 22) +#define WMT_PIN_SD0DATA3 WMT_PIN(3, 23) +#define WMT_PIN_SD1DATA0 WMT_PIN(3, 24) +#define WMT_PIN_SD1DATA1 WMT_PIN(3, 25) +#define WMT_PIN_SD1DATA2 WMT_PIN(3, 26) +#define WMT_PIN_SD1DATA3 WMT_PIN(3, 27) +#define WMT_PIN_SD1DATA4 WMT_PIN(3, 28) +#define WMT_PIN_SD1DATA5 WMT_PIN(3, 29) +#define WMT_PIN_SD1DATA6 WMT_PIN(3, 30) +#define WMT_PIN_SD1DATA7 WMT_PIN(3, 31) +#define WMT_PIN_I2C0_SCL WMT_PIN(5, 8) +#define WMT_PIN_I2C0_SDA WMT_PIN(5, 9) +#define WMT_PIN_I2C1_SCL WMT_PIN(5, 10) +#define WMT_PIN_I2C1_SDA WMT_PIN(5, 11) +#define WMT_PIN_I2C2_SCL WMT_PIN(5, 12) +#define WMT_PIN_I2C2_SDA WMT_PIN(5, 13) +#define WMT_PIN_UART0_RTS WMT_PIN(5, 16) +#define WMT_PIN_UART0_TXD WMT_PIN(5, 17) +#define WMT_PIN_UART0_CTS WMT_PIN(5, 18) +#define WMT_PIN_UART0_RXD WMT_PIN(5, 19) +#define WMT_PIN_UART1_RTS WMT_PIN(5, 20) +#define WMT_PIN_UART1_TXD WMT_PIN(5, 21) +#define WMT_PIN_UART1_CTS WMT_PIN(5, 22) +#define WMT_PIN_UART1_RXD WMT_PIN(5, 23) +#define WMT_PIN_UART2_RTS WMT_PIN(5, 24) +#define WMT_PIN_UART2_TXD WMT_PIN(5, 25) +#define WMT_PIN_UART2_CTS WMT_PIN(5, 26) +#define WMT_PIN_UART2_RXD WMT_PIN(5, 27) +#define WMT_PIN_SD2WP WMT_PIN(6, 3) +#define WMT_PIN_SD2CMD WMT_PIN(6, 6) +#define WMT_PIN_SD2CLK WMT_PIN(6, 7) +#define WMT_PIN_SD2PWR WMT_PIN(6, 9) +#define WMT_PIN_SD1CLK WMT_PIN(7, 0) +#define WMT_PIN_SD1CMD WMT_PIN(7, 1) +#define WMT_PIN_SD1PWR WMT_PIN(7, 10) +#define WMT_PIN_SD1WP WMT_PIN(7, 11) +#define WMT_PIN_SD1CD WMT_PIN(7, 12) +#define WMT_PIN_PWMOUT1 WMT_PIN(7, 26) +#define WMT_PIN_PWMOUT0 WMT_PIN(7, 27) + +static const struct pinctrl_pin_desc wm8850_pins[] = { + PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"), + PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"), + PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"), + PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"), + PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"), + PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"), + PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"), + PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"), + PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"), + PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"), + PINCTRL_PIN(WMT_PIN_WAKEUP2, "wakeup2"), + PINCTRL_PIN(WMT_PIN_WAKEUP3, "wakeup3"), + PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"), + PINCTRL_PIN(WMT_PIN_SUSGPIO1, "susgpio1"), + PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"), + PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"), + PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"), + PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"), + PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"), + PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"), + PINCTRL_PIN(WMT_PIN_VDOUT5, "vdout5"), + PINCTRL_PIN(WMT_PIN_VDOUT6, "vdout6"), + PINCTRL_PIN(WMT_PIN_VDOUT7, "vdout7"), + PINCTRL_PIN(WMT_PIN_VDOUT8, "vdout8"), + PINCTRL_PIN(WMT_PIN_VDOUT9, "vdout9"), + PINCTRL_PIN(WMT_PIN_VDOUT10, "vdout10"), + PINCTRL_PIN(WMT_PIN_VDOUT11, "vdout11"), + PINCTRL_PIN(WMT_PIN_VDOUT12, "vdout12"), + PINCTRL_PIN(WMT_PIN_VDOUT13, "vdout13"), + PINCTRL_PIN(WMT_PIN_VDOUT14, "vdout14"), + PINCTRL_PIN(WMT_PIN_VDOUT15, "vdout15"), + PINCTRL_PIN(WMT_PIN_VDOUT16, "vdout16"), + PINCTRL_PIN(WMT_PIN_VDOUT17, "vdout17"), + PINCTRL_PIN(WMT_PIN_VDOUT18, "vdout18"), + PINCTRL_PIN(WMT_PIN_VDOUT19, "vdout19"), + PINCTRL_PIN(WMT_PIN_VDOUT20, "vdout20"), + PINCTRL_PIN(WMT_PIN_VDOUT21, "vdout21"), + PINCTRL_PIN(WMT_PIN_VDOUT22, "vdout22"), + PINCTRL_PIN(WMT_PIN_VDOUT23, "vdout23"), + PINCTRL_PIN(WMT_PIN_VDIN0, "vdin0"), + PINCTRL_PIN(WMT_PIN_VDIN1, "vdin1"), + PINCTRL_PIN(WMT_PIN_VDIN2, "vdin2"), + PINCTRL_PIN(WMT_PIN_VDIN3, "vdin3"), + PINCTRL_PIN(WMT_PIN_VDIN4, "vdin4"), + PINCTRL_PIN(WMT_PIN_VDIN5, "vdin5"), + PINCTRL_PIN(WMT_PIN_VDIN6, "vdin6"), + PINCTRL_PIN(WMT_PIN_VDIN7, "vdin7"), + PINCTRL_PIN(WMT_PIN_SPI0_MOSI, "spi0_mosi"), + PINCTRL_PIN(WMT_PIN_SPI0_MISO, "spi0_miso"), + PINCTRL_PIN(WMT_PIN_SPI0_SS, "spi0_ss"), + PINCTRL_PIN(WMT_PIN_SPI0_CLK, "spi0_clk"), + PINCTRL_PIN(WMT_PIN_SPI0_SSB, "spi0_ssb"), + PINCTRL_PIN(WMT_PIN_SD0CLK, "sd0_clk"), + PINCTRL_PIN(WMT_PIN_SD0CMD, "sd0_cmd"), + PINCTRL_PIN(WMT_PIN_SD0WP, "sd0_wp"), + PINCTRL_PIN(WMT_PIN_SD0DATA0, "sd0_data0"), + PINCTRL_PIN(WMT_PIN_SD0DATA1, "sd0_data1"), + PINCTRL_PIN(WMT_PIN_SD0DATA2, "sd0_data2"), + PINCTRL_PIN(WMT_PIN_SD0DATA3, "sd0_data3"), + PINCTRL_PIN(WMT_PIN_SD1DATA0, "sd1_data0"), + PINCTRL_PIN(WMT_PIN_SD1DATA1, "sd1_data1"), + PINCTRL_PIN(WMT_PIN_SD1DATA2, "sd1_data2"), + PINCTRL_PIN(WMT_PIN_SD1DATA3, "sd1_data3"), + PINCTRL_PIN(WMT_PIN_SD1DATA4, "sd1_data4"), + PINCTRL_PIN(WMT_PIN_SD1DATA5, "sd1_data5"), + PINCTRL_PIN(WMT_PIN_SD1DATA6, "sd1_data6"), + PINCTRL_PIN(WMT_PIN_SD1DATA7, "sd1_data7"), + PINCTRL_PIN(WMT_PIN_I2C0_SCL, "i2c0_scl"), + PINCTRL_PIN(WMT_PIN_I2C0_SDA, "i2c0_sda"), + PINCTRL_PIN(WMT_PIN_I2C1_SCL, "i2c1_scl"), + PINCTRL_PIN(WMT_PIN_I2C1_SDA, "i2c1_sda"), + PINCTRL_PIN(WMT_PIN_I2C2_SCL, "i2c2_scl"), + PINCTRL_PIN(WMT_PIN_I2C2_SDA, "i2c2_sda"), + PINCTRL_PIN(WMT_PIN_UART0_RTS, "uart0_rts"), + PINCTRL_PIN(WMT_PIN_UART0_TXD, "uart0_txd"), + PINCTRL_PIN(WMT_PIN_UART0_CTS, "uart0_cts"), + PINCTRL_PIN(WMT_PIN_UART0_RXD, "uart0_rxd"), + PINCTRL_PIN(WMT_PIN_UART1_RTS, "uart1_rts"), + PINCTRL_PIN(WMT_PIN_UART1_TXD, "uart1_txd"), + PINCTRL_PIN(WMT_PIN_UART1_CTS, "uart1_cts"), + PINCTRL_PIN(WMT_PIN_UART1_RXD, "uart1_rxd"), + PINCTRL_PIN(WMT_PIN_UART2_RTS, "uart2_rts"), + PINCTRL_PIN(WMT_PIN_UART2_TXD, "uart2_txd"), + PINCTRL_PIN(WMT_PIN_UART2_CTS, "uart2_cts"), + PINCTRL_PIN(WMT_PIN_UART2_RXD, "uart2_rxd"), + PINCTRL_PIN(WMT_PIN_SD2WP, "sd2_wp"), + PINCTRL_PIN(WMT_PIN_SD2CMD, "sd2_cmd"), + PINCTRL_PIN(WMT_PIN_SD2CLK, "sd2_clk"), + PINCTRL_PIN(WMT_PIN_SD2PWR, "sd2_pwr"), + PINCTRL_PIN(WMT_PIN_SD1CLK, "sd1_clk"), + PINCTRL_PIN(WMT_PIN_SD1CMD, "sd1_cmd"), + PINCTRL_PIN(WMT_PIN_SD1PWR, "sd1_pwr"), + PINCTRL_PIN(WMT_PIN_SD1WP, "sd1_wp"), + PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"), + PINCTRL_PIN(WMT_PIN_PWMOUT1, "pwmout1"), + PINCTRL_PIN(WMT_PIN_PWMOUT0, "pwmout0"), +}; + +/* Order of these names must match the above list */ +static const char * const wm8850_groups[] = { + "extgpio0", + "extgpio1", + "extgpio2", + "extgpio3", + "extgpio4", + "extgpio5", + "extgpio6", + "extgpio7", + "wakeup0", + "wakeup1", + "wakeup2", + "wakeup3", + "susgpio0", + "susgpio1", + "sd0_cd", + "vdout0", + "vdout1", + "vdout2", + "vdout3", + "vdout4", + "vdout5", + "vdout6", + "vdout7", + "vdout8", + "vdout9", + "vdout10", + "vdout11", + "vdout12", + "vdout13", + "vdout14", + "vdout15", + "vdout16", + "vdout17", + "vdout18", + "vdout19", + "vdout20", + "vdout21", + "vdout22", + "vdout23", + "vdin0", + "vdin1", + "vdin2", + "vdin3", + "vdin4", + "vdin5", + "vdin6", + "vdin7", + "spi0_mosi", + "spi0_miso", + "spi0_ss", + "spi0_clk", + "spi0_ssb", + "sd0_clk", + "sd0_cmd", + "sd0_wp", + "sd0_data0", + "sd0_data1", + "sd0_data2", + "sd0_data3", + "sd1_data0", + "sd1_data1", + "sd1_data2", + "sd1_data3", + "sd1_data4", + "sd1_data5", + "sd1_data6", + "sd1_data7", + "i2c0_scl", + "i2c0_sda", + "i2c1_scl", + "i2c1_sda", + "i2c2_scl", + "i2c2_sda", + "uart0_rts", + "uart0_txd", + "uart0_cts", + "uart0_rxd", + "uart1_rts", + "uart1_txd", + "uart1_cts", + "uart1_rxd", + "uart2_rts", + "uart2_txd", + "uart2_cts", + "uart2_rxd", + "sd2_wp", + "sd2_cmd", + "sd2_clk", + "sd2_pwr", + "sd1_clk", + "sd1_cmd", + "sd1_pwr", + "sd1_wp", + "sd1_cd", + "pwmout1", + "pwmout0", +}; + +static int wm8850_pinctrl_probe(struct platform_device *pdev) +{ + struct wmt_pinctrl_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "failed to allocate data\n"); + return -ENOMEM; + } + + data->banks = wm8850_banks; + data->nbanks = ARRAY_SIZE(wm8850_banks); + data->pins = wm8850_pins; + data->npins = ARRAY_SIZE(wm8850_pins); + data->groups = wm8850_groups; + data->ngroups = ARRAY_SIZE(wm8850_groups); + + return wmt_pinctrl_probe(pdev, data); +} + +static int wm8850_pinctrl_remove(struct platform_device *pdev) +{ + return wmt_pinctrl_remove(pdev); +} + +static struct of_device_id wmt_pinctrl_of_match[] = { + { .compatible = "wm,wm8850-pinctrl" }, + { /* sentinel */ }, +}; + +static struct platform_driver wmt_pinctrl_driver = { + .probe = wm8850_pinctrl_probe, + .remove = wm8850_pinctrl_remove, + .driver = { + .name = "pinctrl-wm8850", + .owner = THIS_MODULE, + .of_match_table = wmt_pinctrl_of_match, + }, +}; + +module_platform_driver(wmt_pinctrl_driver); + +MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); +MODULE_DESCRIPTION("Wondermedia WM8850 Pincontrol driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, wmt_pinctrl_of_match); diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c new file mode 100644 index 000000000000..ab63104e8dc9 --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c @@ -0,0 +1,632 @@ +/* + * Pinctrl driver for the Wondermedia SoC's + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "pinctrl-wmt.h" + +static inline void wmt_setbits(struct wmt_pinctrl_data *data, u32 reg, + u32 mask) +{ + u32 val; + + val = readl_relaxed(data->base + reg); + val |= mask; + writel_relaxed(val, data->base + reg); +} + +static inline void wmt_clearbits(struct wmt_pinctrl_data *data, u32 reg, + u32 mask) +{ + u32 val; + + val = readl_relaxed(data->base + reg); + val &= ~mask; + writel_relaxed(val, data->base + reg); +} + +enum wmt_func_sel { + WMT_FSEL_GPIO_IN = 0, + WMT_FSEL_GPIO_OUT = 1, + WMT_FSEL_ALT = 2, + WMT_FSEL_COUNT = 3, +}; + +static const char * const wmt_functions[WMT_FSEL_COUNT] = { + [WMT_FSEL_GPIO_IN] = "gpio_in", + [WMT_FSEL_GPIO_OUT] = "gpio_out", + [WMT_FSEL_ALT] = "alt", +}; + +static int wmt_pmx_get_functions_count(struct pinctrl_dev *pctldev) +{ + return WMT_FSEL_COUNT; +} + +static const char *wmt_pmx_get_function_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + return wmt_functions[selector]; +} + +static int wmt_pmx_get_function_groups(struct pinctrl_dev *pctldev, + unsigned selector, + const char * const **groups, + unsigned * const num_groups) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + /* every pin does every function */ + *groups = data->groups; + *num_groups = data->ngroups; + + return 0; +} + +static int wmt_set_pinmux(struct wmt_pinctrl_data *data, unsigned func, + unsigned pin) +{ + u32 bank = WMT_BANK_FROM_PIN(pin); + u32 bit = WMT_BIT_FROM_PIN(pin); + u32 reg_en = data->banks[bank].reg_en; + u32 reg_dir = data->banks[bank].reg_dir; + + if (reg_dir == NO_REG) { + dev_err(data->dev, "pin:%d no direction register defined\n", + pin); + return -EINVAL; + } + + /* + * If reg_en == NO_REG, we assume it is a dedicated GPIO and cannot be + * disabled (as on VT8500) and that no alternate function is available. + */ + switch (func) { + case WMT_FSEL_GPIO_IN: + if (reg_en != NO_REG) + wmt_setbits(data, reg_en, BIT(bit)); + wmt_clearbits(data, reg_dir, BIT(bit)); + break; + case WMT_FSEL_GPIO_OUT: + if (reg_en != NO_REG) + wmt_setbits(data, reg_en, BIT(bit)); + wmt_setbits(data, reg_dir, BIT(bit)); + break; + case WMT_FSEL_ALT: + if (reg_en == NO_REG) { + dev_err(data->dev, "pin:%d no alt function available\n", + pin); + return -EINVAL; + } + wmt_clearbits(data, reg_en, BIT(bit)); + } + + return 0; +} + +static int wmt_pmx_enable(struct pinctrl_dev *pctldev, + unsigned func_selector, + unsigned group_selector) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + u32 pinnum = data->pins[group_selector].number; + + return wmt_set_pinmux(data, func_selector, pinnum); +} + +static void wmt_pmx_disable(struct pinctrl_dev *pctldev, + unsigned func_selector, + unsigned group_selector) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + u32 pinnum = data->pins[group_selector].number; + + /* disable by setting GPIO_IN */ + wmt_set_pinmux(data, WMT_FSEL_GPIO_IN, pinnum); +} + +static void wmt_pmx_gpio_disable_free(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + /* disable by setting GPIO_IN */ + wmt_set_pinmux(data, WMT_FSEL_GPIO_IN, offset); +} + +static int wmt_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset, + bool input) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + wmt_set_pinmux(data, (input ? WMT_FSEL_GPIO_IN : WMT_FSEL_GPIO_OUT), + offset); + + return 0; +} + +static struct pinmux_ops wmt_pinmux_ops = { + .get_functions_count = wmt_pmx_get_functions_count, + .get_function_name = wmt_pmx_get_function_name, + .get_function_groups = wmt_pmx_get_function_groups, + .enable = wmt_pmx_enable, + .disable = wmt_pmx_disable, + .gpio_disable_free = wmt_pmx_gpio_disable_free, + .gpio_set_direction = wmt_pmx_gpio_set_direction, +}; + +static int wmt_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + return data->ngroups; +} + +static const char *wmt_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + return data->groups[selector]; +} + +static int wmt_get_group_pins(struct pinctrl_dev *pctldev, + unsigned selector, + const unsigned **pins, + unsigned *num_pins) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + *pins = &data->pins[selector].number; + *num_pins = 1; + + return 0; +} + +static int wmt_pctl_find_group_by_pin(struct wmt_pinctrl_data *data, u32 pin) +{ + int i; + + for (i = 0; i < data->npins; i++) { + if (data->pins[i].number == pin) + return i; + } + + return -EINVAL; +} + +static int wmt_pctl_dt_node_to_map_func(struct wmt_pinctrl_data *data, + struct device_node *np, + u32 pin, u32 fnum, + struct pinctrl_map **maps) +{ + int group; + struct pinctrl_map *map = *maps; + + if (fnum >= ARRAY_SIZE(wmt_functions)) { + dev_err(data->dev, "invalid wm,function %d\n", fnum); + return -EINVAL; + } + + group = wmt_pctl_find_group_by_pin(data, pin); + if (group < 0) { + dev_err(data->dev, "unable to match pin %d to group\n", pin); + return group; + } + + map->type = PIN_MAP_TYPE_MUX_GROUP; + map->data.mux.group = data->groups[group]; + map->data.mux.function = wmt_functions[fnum]; + (*maps)++; + + return 0; +} + +static int wmt_pctl_dt_node_to_map_pull(struct wmt_pinctrl_data *data, + struct device_node *np, + u32 pin, u32 pull, + struct pinctrl_map **maps) +{ + int group; + unsigned long *configs; + struct pinctrl_map *map = *maps; + + if (pull > 2) { + dev_err(data->dev, "invalid wm,pull %d\n", pull); + return -EINVAL; + } + + group = wmt_pctl_find_group_by_pin(data, pin); + if (group < 0) { + dev_err(data->dev, "unable to match pin %d to group\n", pin); + return group; + } + + configs = kzalloc(sizeof(*configs), GFP_KERNEL); + if (!configs) + return -ENOMEM; + + configs[0] = pull; + + map->type = PIN_MAP_TYPE_CONFIGS_PIN; + map->data.configs.group_or_pin = data->groups[group]; + map->data.configs.configs = configs; + map->data.configs.num_configs = 1; + (*maps)++; + + return 0; +} + +static void wmt_pctl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *maps, + unsigned num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) + if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN) + kfree(maps[i].data.configs.configs); + + kfree(maps); +} + +static int wmt_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, + unsigned *num_maps) +{ + struct pinctrl_map *maps, *cur_map; + struct property *pins, *funcs, *pulls; + u32 pin, func, pull; + int num_pins, num_funcs, num_pulls, maps_per_pin; + int i, err; + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + + pins = of_find_property(np, "wm,pins", NULL); + if (!pins) { + dev_err(data->dev, "missing wmt,pins property\n"); + return -EINVAL; + } + + funcs = of_find_property(np, "wm,function", NULL); + pulls = of_find_property(np, "wm,pull", NULL); + + if (!funcs && !pulls) { + dev_err(data->dev, "neither wm,function nor wm,pull specified\n"); + return -EINVAL; + } + + /* + * The following lines calculate how many values are defined for each + * of the properties. + */ + num_pins = pins->length / sizeof(u32); + num_funcs = funcs ? (funcs->length / sizeof(u32)) : 0; + num_pulls = pulls ? (pulls->length / sizeof(u32)) : 0; + + if (num_funcs > 1 && num_funcs != num_pins) { + dev_err(data->dev, "wm,function must have 1 or %d entries\n", + num_pins); + return -EINVAL; + } + + if (num_pulls > 1 && num_pulls != num_pins) { + dev_err(data->dev, "wm,pull must have 1 or %d entries\n", + num_pins); + return -EINVAL; + } + + maps_per_pin = 0; + if (num_funcs) + maps_per_pin++; + if (num_pulls) + maps_per_pin++; + + cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps), + GFP_KERNEL); + if (!maps) + return -ENOMEM; + + for (i = 0; i < num_pins; i++) { + err = of_property_read_u32_index(np, "wm,pins", i, &pin); + if (err) + goto fail; + + if (pin >= (data->nbanks * 32)) { + dev_err(data->dev, "invalid wm,pins value\n"); + err = -EINVAL; + goto fail; + } + + if (num_funcs) { + err = of_property_read_u32_index(np, "wm,function", + (num_funcs > 1 ? i : 0), &func); + if (err) + goto fail; + + err = wmt_pctl_dt_node_to_map_func(data, np, pin, func, + &cur_map); + if (err) + goto fail; + } + + if (num_pulls) { + err = of_property_read_u32_index(np, "wm,pull", + (num_pulls > 1 ? i : 0), &pull); + if (err) + goto fail; + + err = wmt_pctl_dt_node_to_map_pull(data, np, pin, pull, + &cur_map); + if (err) + goto fail; + } + } + *map = maps; + *num_maps = num_pins * maps_per_pin; + return 0; + +/* + * The fail path removes any maps that have been allocated. The fail path is + * only called from code after maps has been kzalloc'd. It is also safe to + * pass 'num_pins * maps_per_pin' as the map count even though we probably + * failed before all the mappings were read as all maps are allocated at once, + * and configs are only allocated for .type = PIN_MAP_TYPE_CONFIGS_PIN - there + * is no failpath where a config can be allocated without .type being set. + */ +fail: + wmt_pctl_dt_free_map(pctldev, maps, num_pins * maps_per_pin); + return err; +} + +static struct pinctrl_ops wmt_pctl_ops = { + .get_groups_count = wmt_get_groups_count, + .get_group_name = wmt_get_group_name, + .get_group_pins = wmt_get_group_pins, + .dt_node_to_map = wmt_pctl_dt_node_to_map, + .dt_free_map = wmt_pctl_dt_free_map, +}; + +static int wmt_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin, + unsigned long *config) +{ + return -ENOTSUPP; +} + +static int wmt_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin, + unsigned long config) +{ + struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param = pinconf_to_config_param(config); + u16 arg = pinconf_to_config_argument(config); + u32 bank = WMT_BANK_FROM_PIN(pin); + u32 bit = WMT_BIT_FROM_PIN(pin); + u32 reg_pull_en = data->banks[bank].reg_pull_en; + u32 reg_pull_cfg = data->banks[bank].reg_pull_cfg; + + if ((reg_pull_en == NO_REG) || (reg_pull_cfg == NO_REG)) { + dev_err(data->dev, "bias functions not supported on pin %d\n", + pin); + return -EINVAL; + } + + if ((param == PIN_CONFIG_BIAS_PULL_DOWN) || + (param == PIN_CONFIG_BIAS_PULL_UP)) { + if (arg == 0) + param = PIN_CONFIG_BIAS_DISABLE; + } + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + wmt_clearbits(data, reg_pull_en, BIT(bit)); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + wmt_clearbits(data, reg_pull_cfg, BIT(bit)); + wmt_setbits(data, reg_pull_en, BIT(bit)); + break; + case PIN_CONFIG_BIAS_PULL_UP: + wmt_setbits(data, reg_pull_cfg, BIT(bit)); + wmt_setbits(data, reg_pull_en, BIT(bit)); + break; + default: + dev_err(data->dev, "unknown pinconf param\n"); + return -EINVAL; + } + + return 0; +} + +static struct pinconf_ops wmt_pinconf_ops = { + .pin_config_get = wmt_pinconf_get, + .pin_config_set = wmt_pinconf_set, +}; + +static struct pinctrl_desc wmt_desc = { + .owner = THIS_MODULE, + .name = "pinctrl-wmt", + .pctlops = &wmt_pctl_ops, + .pmxops = &wmt_pinmux_ops, + .confops = &wmt_pinconf_ops, +}; + +static int wmt_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + return pinctrl_request_gpio(chip->base + offset); +} + +static void wmt_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + pinctrl_free_gpio(chip->base + offset); +} + +static int wmt_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev); + u32 bank = WMT_BANK_FROM_PIN(offset); + u32 bit = WMT_BIT_FROM_PIN(offset); + u32 reg_dir = data->banks[bank].reg_dir; + u32 val; + + val = readl_relaxed(data->base + reg_dir); + if (val & BIT(bit)) + return GPIOF_DIR_OUT; + else + return GPIOF_DIR_IN; +} + +static int wmt_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + return pinctrl_gpio_direction_input(chip->base + offset); +} + +static int wmt_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + return pinctrl_gpio_direction_output(chip->base + offset); +} + +static int wmt_gpio_get_value(struct gpio_chip *chip, unsigned offset) +{ + struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev); + u32 bank = WMT_BANK_FROM_PIN(offset); + u32 bit = WMT_BIT_FROM_PIN(offset); + u32 reg_data_in = data->banks[bank].reg_data_in; + + if (reg_data_in == NO_REG) { + dev_err(data->dev, "no data in register defined\n"); + return -EINVAL; + } + + return !!(readl_relaxed(data->base + reg_data_in) & BIT(bit)); +} + +static void wmt_gpio_set_value(struct gpio_chip *chip, unsigned offset, + int val) +{ + struct wmt_pinctrl_data *data = dev_get_drvdata(chip->dev); + u32 bank = WMT_BANK_FROM_PIN(offset); + u32 bit = WMT_BIT_FROM_PIN(offset); + u32 reg_data_out = data->banks[bank].reg_data_out; + + if (reg_data_out == NO_REG) { + dev_err(data->dev, "no data out register defined\n"); + return; + } + + if (val) + wmt_setbits(data, reg_data_out, BIT(bit)); + else + wmt_clearbits(data, reg_data_out, BIT(bit)); +} + +static struct gpio_chip wmt_gpio_chip = { + .label = "gpio-wmt", + .owner = THIS_MODULE, + .request = wmt_gpio_request, + .free = wmt_gpio_free, + .get_direction = wmt_gpio_get_direction, + .direction_input = wmt_gpio_direction_input, + .direction_output = wmt_gpio_direction_output, + .get = wmt_gpio_get_value, + .set = wmt_gpio_set_value, + .can_sleep = 0, +}; + +int wmt_pinctrl_probe(struct platform_device *pdev, + struct wmt_pinctrl_data *data) +{ + int err; + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->base = devm_request_and_ioremap(&pdev->dev, res); + if (!data->base) { + dev_err(&pdev->dev, "failed to map memory resource\n"); + return -EBUSY; + } + + wmt_desc.pins = data->pins; + wmt_desc.npins = data->npins; + + data->gpio_chip = wmt_gpio_chip; + data->gpio_chip.dev = &pdev->dev; + data->gpio_chip.of_node = pdev->dev.of_node; + data->gpio_chip.ngpio = data->nbanks * 32; + + platform_set_drvdata(pdev, data); + + data->dev = &pdev->dev; + + data->pctl_dev = pinctrl_register(&wmt_desc, &pdev->dev, data); + if (!data->pctl_dev) { + dev_err(&pdev->dev, "Failed to register pinctrl\n"); + return -EINVAL; + } + + err = gpiochip_add(&data->gpio_chip); + if (err) { + dev_err(&pdev->dev, "could not add GPIO chip\n"); + goto fail_gpio; + } + + err = gpiochip_add_pin_range(&data->gpio_chip, dev_name(data->dev), + 0, 0, data->nbanks * 32); + if (err) + goto fail_range; + + dev_info(&pdev->dev, "Pin controller initialized\n"); + + return 0; + +fail_range: + err = gpiochip_remove(&data->gpio_chip); + if (err) + dev_err(&pdev->dev, "failed to remove gpio chip\n"); +fail_gpio: + pinctrl_unregister(data->pctl_dev); + return err; +} + +int wmt_pinctrl_remove(struct platform_device *pdev) +{ + struct wmt_pinctrl_data *data = platform_get_drvdata(pdev); + int err; + + err = gpiochip_remove(&data->gpio_chip); + if (err) + dev_err(&pdev->dev, "failed to remove gpio chip\n"); + + pinctrl_unregister(data->pctl_dev); + + return 0; +} diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.h b/drivers/pinctrl/vt8500/pinctrl-wmt.h new file mode 100644 index 000000000000..41f5f2deb5d6 --- /dev/null +++ b/drivers/pinctrl/vt8500/pinctrl-wmt.h @@ -0,0 +1,79 @@ +/* + * Pinctrl driver for the Wondermedia SoC's + * + * Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/gpio.h> + +/* VT8500 has no enable register in the extgpio bank. */ +#define NO_REG 0xFFFF + +#define WMT_PINCTRL_BANK(__en, __dir, __dout, __din, __pen, __pcfg) \ +{ \ + .reg_en = __en, \ + .reg_dir = __dir, \ + .reg_data_out = __dout, \ + .reg_data_in = __din, \ + .reg_pull_en = __pen, \ + .reg_pull_cfg = __pcfg, \ +} + +/* Encode/decode the bank/bit pairs into a pin value */ +#define WMT_PIN(__bank, __offset) ((__bank << 5) | __offset) +#define WMT_BANK_FROM_PIN(__pin) (__pin >> 5) +#define WMT_BIT_FROM_PIN(__pin) (__pin & 0x1f) + +#define WMT_GROUP(__name, __data) \ +{ \ + .name = __name, \ + .pins = __data, \ + .npins = ARRAY_SIZE(__data), \ +} + +struct wmt_pinctrl_bank_registers { + u32 reg_en; + u32 reg_dir; + u32 reg_data_out; + u32 reg_data_in; + + u32 reg_pull_en; + u32 reg_pull_cfg; +}; + +struct wmt_pinctrl_group { + const char *name; + const unsigned int *pins; + const unsigned npins; +}; + +struct wmt_pinctrl_data { + struct device *dev; + struct pinctrl_dev *pctl_dev; + + /* must be initialized before calling wmt_pinctrl_probe */ + void __iomem *base; + const struct wmt_pinctrl_bank_registers *banks; + const struct pinctrl_pin_desc *pins; + const char * const *groups; + + u32 nbanks; + u32 npins; + u32 ngroups; + + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range gpio_range; +}; + +int wmt_pinctrl_probe(struct platform_device *pdev, + struct wmt_pinctrl_data *data); +int wmt_pinctrl_remove(struct platform_device *pdev); diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig new file mode 100644 index 000000000000..c9d04f797862 --- /dev/null +++ b/drivers/reset/Kconfig @@ -0,0 +1,13 @@ +config ARCH_HAS_RESET_CONTROLLER + bool + +menuconfig RESET_CONTROLLER + bool "Reset Controller Support" + default y if ARCH_HAS_RESET_CONTROLLER + help + Generic Reset Controller support. + + This framework is designed to abstract reset handling of devices + via GPIOs or SoC-internal reset controller modules. + + If unsure, say no. diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile new file mode 100644 index 000000000000..1e2d83f2b995 --- /dev/null +++ b/drivers/reset/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_RESET_CONTROLLER) += core.o diff --git a/drivers/reset/core.c b/drivers/reset/core.c new file mode 100644 index 000000000000..d1b6089a0ef8 --- /dev/null +++ b/drivers/reset/core.c @@ -0,0 +1,297 @@ +/* + * Reset Controller framework + * + * Copyright 2013 Philipp Zabel, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/device.h> +#include <linux/err.h> +#include <linux/export.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/reset.h> +#include <linux/reset-controller.h> +#include <linux/slab.h> + +static DEFINE_MUTEX(reset_controller_list_mutex); +static LIST_HEAD(reset_controller_list); + +/** + * struct reset_control - a reset control + * @rcdev: a pointer to the reset controller device + * this reset control belongs to + * @id: ID of the reset controller in the reset + * controller device + */ +struct reset_control { + struct reset_controller_dev *rcdev; + struct device *dev; + unsigned int id; +}; + +/** + * of_reset_simple_xlate - translate reset_spec to the reset line number + * @rcdev: a pointer to the reset controller device + * @reset_spec: reset line specifier as found in the device tree + * @flags: a flags pointer to fill in (optional) + * + * This simple translation function should be used for reset controllers + * with 1:1 mapping, where reset lines can be indexed by number without gaps. + */ +int of_reset_simple_xlate(struct reset_controller_dev *rcdev, + const struct of_phandle_args *reset_spec) +{ + if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells)) + return -EINVAL; + + if (reset_spec->args[0] >= rcdev->nr_resets) + return -EINVAL; + + return reset_spec->args[0]; +} +EXPORT_SYMBOL_GPL(of_reset_simple_xlate); + +/** + * reset_controller_register - register a reset controller device + * @rcdev: a pointer to the initialized reset controller device + */ +int reset_controller_register(struct reset_controller_dev *rcdev) +{ + if (!rcdev->of_xlate) { + rcdev->of_reset_n_cells = 1; + rcdev->of_xlate = of_reset_simple_xlate; + } + + mutex_lock(&reset_controller_list_mutex); + list_add(&rcdev->list, &reset_controller_list); + mutex_unlock(&reset_controller_list_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(reset_controller_register); + +/** + * reset_controller_unregister - unregister a reset controller device + * @rcdev: a pointer to the reset controller device + */ +void reset_controller_unregister(struct reset_controller_dev *rcdev) +{ + mutex_lock(&reset_controller_list_mutex); + list_del(&rcdev->list); + mutex_unlock(&reset_controller_list_mutex); +} +EXPORT_SYMBOL_GPL(reset_controller_unregister); + +/** + * reset_control_reset - reset the controlled device + * @rstc: reset controller + */ +int reset_control_reset(struct reset_control *rstc) +{ + if (rstc->rcdev->ops->reset) + return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id); + + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(reset_control_reset); + +/** + * reset_control_assert - asserts the reset line + * @rstc: reset controller + */ +int reset_control_assert(struct reset_control *rstc) +{ + if (rstc->rcdev->ops->assert) + return rstc->rcdev->ops->assert(rstc->rcdev, rstc->id); + + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(reset_control_assert); + +/** + * reset_control_deassert - deasserts the reset line + * @rstc: reset controller + */ +int reset_control_deassert(struct reset_control *rstc) +{ + if (rstc->rcdev->ops->deassert) + return rstc->rcdev->ops->deassert(rstc->rcdev, rstc->id); + + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(reset_control_deassert); + +/** + * reset_control_get - Lookup and obtain a reference to a reset controller. + * @dev: device to be reset by the controller + * @id: reset line name + * + * Returns a struct reset_control or IS_ERR() condition containing errno. + * + * Use of id names is optional. + */ +struct reset_control *reset_control_get(struct device *dev, const char *id) +{ + struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER); + struct reset_controller_dev *r, *rcdev; + struct of_phandle_args args; + int index = 0; + int rstc_id; + int ret; + + if (!dev) + return ERR_PTR(-EINVAL); + + if (id) + index = of_property_match_string(dev->of_node, + "reset-names", id); + ret = of_parse_phandle_with_args(dev->of_node, "resets", "#reset-cells", + index, &args); + if (ret) + return ERR_PTR(ret); + + mutex_lock(&reset_controller_list_mutex); + rcdev = NULL; + list_for_each_entry(r, &reset_controller_list, list) { + if (args.np == r->of_node) { + rcdev = r; + break; + } + } + of_node_put(args.np); + + if (!rcdev) { + mutex_unlock(&reset_controller_list_mutex); + return ERR_PTR(-ENODEV); + } + + rstc_id = rcdev->of_xlate(rcdev, &args); + if (rstc_id < 0) { + mutex_unlock(&reset_controller_list_mutex); + return ERR_PTR(rstc_id); + } + + try_module_get(rcdev->owner); + mutex_unlock(&reset_controller_list_mutex); + + rstc = kzalloc(sizeof(*rstc), GFP_KERNEL); + if (!rstc) { + module_put(rcdev->owner); + return ERR_PTR(-ENOMEM); + } + + rstc->dev = dev; + rstc->rcdev = rcdev; + rstc->id = rstc_id; + + return rstc; +} +EXPORT_SYMBOL_GPL(reset_control_get); + +/** + * reset_control_put - free the reset controller + * @rstc: reset controller + */ + +void reset_control_put(struct reset_control *rstc) +{ + if (IS_ERR(rstc)) + return; + + module_put(rstc->rcdev->owner); + kfree(rstc); +} +EXPORT_SYMBOL_GPL(reset_control_put); + +static void devm_reset_control_release(struct device *dev, void *res) +{ + reset_control_put(*(struct reset_control **)res); +} + +/** + * devm_reset_control_get - resource managed reset_control_get() + * @dev: device to be reset by the controller + * @id: reset line name + * + * Managed reset_control_get(). For reset controllers returned from this + * function, reset_control_put() is called automatically on driver detach. + * See reset_control_get() for more information. + */ +struct reset_control *devm_reset_control_get(struct device *dev, const char *id) +{ + struct reset_control **ptr, *rstc; + + ptr = devres_alloc(devm_reset_control_release, sizeof(*ptr), + GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + rstc = reset_control_get(dev, id); + if (!IS_ERR(rstc)) { + *ptr = rstc; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return rstc; +} +EXPORT_SYMBOL_GPL(devm_reset_control_get); + +static int devm_reset_control_match(struct device *dev, void *res, void *data) +{ + struct reset_control **rstc = res; + if (WARN_ON(!rstc || !*rstc)) + return 0; + return *rstc == data; +} + +/** + * devm_reset_control_put - resource managed reset_control_put() + * @rstc: reset controller to free + * + * Deallocate a reset control allocated withd devm_reset_control_get(). + * This function will not need to be called normally, as devres will take + * care of freeing the resource. + */ +void devm_reset_control_put(struct reset_control *rstc) +{ + int ret; + + ret = devres_release(rstc->dev, devm_reset_control_release, + devm_reset_control_match, rstc); + if (ret) + WARN_ON(ret); +} +EXPORT_SYMBOL_GPL(devm_reset_control_put); + +/** + * device_reset - find reset controller associated with the device + * and perform reset + * @dev: device to be reset by the controller + * + * Convenience wrapper for reset_control_get() and reset_control_reset(). + * This is useful for the common case of devices with single, dedicated reset + * lines. + */ +int device_reset(struct device *dev) +{ + struct reset_control *rstc; + int ret; + + rstc = reset_control_get(dev, NULL); + if (IS_ERR(rstc)) + return PTR_ERR(rstc); + + ret = reset_control_reset(rstc); + + reset_control_put(rstc); + + return ret; +} +EXPORT_SYMBOL_GPL(device_reset); diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 98348ec0b3ce..540909de6247 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -34,6 +34,77 @@ #define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */ #define ATMEL_LCDC_FIFO_SIZE 512 /* words */ +struct atmel_lcdfb_config { + bool have_alt_pixclock; + bool have_hozval; + bool have_intensity_bit; +}; + +static struct atmel_lcdfb_config at91sam9261_config = { + .have_hozval = true, + .have_intensity_bit = true, +}; + +static struct atmel_lcdfb_config at91sam9263_config = { + .have_intensity_bit = true, +}; + +static struct atmel_lcdfb_config at91sam9g10_config = { + .have_hozval = true, +}; + +static struct atmel_lcdfb_config at91sam9g45_config = { + .have_alt_pixclock = true, +}; + +static struct atmel_lcdfb_config at91sam9g45es_config = { +}; + +static struct atmel_lcdfb_config at91sam9rl_config = { + .have_intensity_bit = true, +}; + +static struct atmel_lcdfb_config at32ap_config = { + .have_hozval = true, +}; + +static const struct platform_device_id atmel_lcdfb_devtypes[] = { + { + .name = "at91sam9261-lcdfb", + .driver_data = (unsigned long)&at91sam9261_config, + }, { + .name = "at91sam9263-lcdfb", + .driver_data = (unsigned long)&at91sam9263_config, + }, { + .name = "at91sam9g10-lcdfb", + .driver_data = (unsigned long)&at91sam9g10_config, + }, { + .name = "at91sam9g45-lcdfb", + .driver_data = (unsigned long)&at91sam9g45_config, + }, { + .name = "at91sam9g45es-lcdfb", + .driver_data = (unsigned long)&at91sam9g45es_config, + }, { + .name = "at91sam9rl-lcdfb", + .driver_data = (unsigned long)&at91sam9rl_config, + }, { + .name = "at32ap-lcdfb", + .driver_data = (unsigned long)&at32ap_config, + }, { + /* terminator */ + } +}; + +static struct atmel_lcdfb_config * +atmel_lcdfb_get_config(struct platform_device *pdev) +{ + unsigned long data; + + data = platform_get_device_id(pdev)->driver_data; + + return (struct atmel_lcdfb_config *)data; +} + #if defined(CONFIG_ARCH_AT91) #define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \ | FBINFO_PARTIAL_PAN_OK \ @@ -193,14 +264,16 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = { .accel = FB_ACCEL_NONE, }; -static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2) +static unsigned long compute_hozval(struct atmel_lcdfb_info *sinfo, + unsigned long xres) { + unsigned long lcdcon2; unsigned long value; - if (!(cpu_is_at91sam9261() || cpu_is_at91sam9g10() - || cpu_is_at32ap7000())) + if (!sinfo->config->have_hozval) return xres; + lcdcon2 = lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2); value = xres; if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) { /* STN display */ @@ -423,7 +496,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, break; case 16: /* Older SOCs use IBGR:555 rather than BGR:565. */ - if (sinfo->have_intensity_bit) + if (sinfo->config->have_intensity_bit) var->green.length = 5; else var->green.length = 6; @@ -531,7 +604,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info) /* Now, the LCDC core... */ /* Set pixel clock */ - if (cpu_is_at91sam9g45() && !cpu_is_at91sam9g45es()) + if (sinfo->config->have_alt_pixclock) pix_factor = 1; clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; @@ -591,8 +664,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info) lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value); /* Horizontal value (aka line size) */ - hozval_linesz = compute_hozval(info->var.xres, - lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2)); + hozval_linesz = compute_hozval(sinfo, info->var.xres); /* Display size */ value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET; @@ -684,7 +756,7 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red, case FB_VISUAL_PSEUDOCOLOR: if (regno < 256) { - if (sinfo->have_intensity_bit) { + if (sinfo->config->have_intensity_bit) { /* old style I+BGR:555 */ val = ((red >> 11) & 0x001f); val |= ((green >> 6) & 0x03e0); @@ -821,15 +893,13 @@ static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo) static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo) { - if (sinfo->bus_clk) - clk_enable(sinfo->bus_clk); + clk_enable(sinfo->bus_clk); clk_enable(sinfo->lcdc_clk); } static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo) { - if (sinfo->bus_clk) - clk_disable(sinfo->bus_clk); + clk_disable(sinfo->bus_clk); clk_disable(sinfo->lcdc_clk); } @@ -874,10 +944,9 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) } sinfo->info = info; sinfo->pdev = pdev; - if (cpu_is_at91sam9261() || cpu_is_at91sam9263() || - cpu_is_at91sam9rl()) { - sinfo->have_intensity_bit = true; - } + sinfo->config = atmel_lcdfb_get_config(pdev); + if (!sinfo->config) + goto free_info; strcpy(info->fix.id, sinfo->pdev->name); info->flags = ATMEL_LCDFB_FBINFO_DEFAULT; @@ -888,13 +957,10 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) info->fix = atmel_lcdfb_fix; /* Enable LCDC Clocks */ - if (cpu_is_at91sam9261() || cpu_is_at91sam9g10() - || cpu_is_at32ap7000()) { - sinfo->bus_clk = clk_get(dev, "hck1"); - if (IS_ERR(sinfo->bus_clk)) { - ret = PTR_ERR(sinfo->bus_clk); - goto free_info; - } + sinfo->bus_clk = clk_get(dev, "hclk"); + if (IS_ERR(sinfo->bus_clk)) { + ret = PTR_ERR(sinfo->bus_clk); + goto free_info; } sinfo->lcdc_clk = clk_get(dev, "lcdc_clk"); if (IS_ERR(sinfo->lcdc_clk)) { @@ -1055,8 +1121,7 @@ stop_clk: atmel_lcdfb_stop_clock(sinfo); clk_put(sinfo->lcdc_clk); put_bus_clk: - if (sinfo->bus_clk) - clk_put(sinfo->bus_clk); + clk_put(sinfo->bus_clk); free_info: framebuffer_release(info); out: @@ -1081,8 +1146,7 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev) unregister_framebuffer(info); atmel_lcdfb_stop_clock(sinfo); clk_put(sinfo->lcdc_clk); - if (sinfo->bus_clk) - clk_put(sinfo->bus_clk); + clk_put(sinfo->bus_clk); fb_dealloc_cmap(&info->cmap); free_irq(sinfo->irq_base, info); iounmap(sinfo->mmio); @@ -1151,7 +1215,7 @@ static struct platform_driver atmel_lcdfb_driver = { .remove = __exit_p(atmel_lcdfb_remove), .suspend = atmel_lcdfb_suspend, .resume = atmel_lcdfb_resume, - + .id_table = atmel_lcdfb_devtypes, .driver = { .name = "atmel_lcdfb", .owner = THIS_MODULE, diff --git a/include/linux/clk/tegra.h b/include/linux/clk/tegra.h index 404d6f940872..642789baec74 100644 --- a/include/linux/clk/tegra.h +++ b/include/linux/clk/tegra.h @@ -123,5 +123,6 @@ static inline void tegra_cpu_clock_resume(void) void tegra_periph_reset_deassert(struct clk *c); void tegra_periph_reset_assert(struct clk *c); void tegra_clocks_init(void); +void tegra_clocks_apply_init_table(void); #endif /* __LINUX_CLK_TEGRA_H_ */ diff --git a/include/linux/of.h b/include/linux/of.h index 2d25ff8fe39a..fb2002f3c7dc 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -235,6 +235,9 @@ extern struct device_node *of_find_node_with_property( extern struct property *of_find_property(const struct device_node *np, const char *name, int *lenp); +extern int of_property_read_u32_index(const struct device_node *np, + const char *propname, + u32 index, u32 *out_value); extern int of_property_read_u8_array(const struct device_node *np, const char *propname, u8 *out_values, size_t sz); extern int of_property_read_u16_array(const struct device_node *np, @@ -394,6 +397,12 @@ static inline struct device_node *of_find_compatible_node( return NULL; } +static inline int of_property_read_u32_index(const struct device_node *np, + const char *propname, u32 index, u32 *out_value) +{ + return -ENOSYS; +} + static inline int of_property_read_u8_array(const struct device_node *np, const char *propname, u8 *out_values, size_t sz) { diff --git a/include/linux/platform_data/irq-renesas-intc-irqpin.h b/include/linux/platform_data/irq-renesas-intc-irqpin.h new file mode 100644 index 000000000000..e4cb911066a6 --- /dev/null +++ b/include/linux/platform_data/irq-renesas-intc-irqpin.h @@ -0,0 +1,29 @@ +/* + * Renesas INTC External IRQ Pin Driver + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __IRQ_RENESAS_INTC_IRQPIN_H__ +#define __IRQ_RENESAS_INTC_IRQPIN_H__ + +struct renesas_intc_irqpin_config { + unsigned int sense_bitfield_width; + unsigned int irq_base; + bool control_parent; +}; + +#endif /* __IRQ_RENESAS_INTC_IRQPIN_H__ */ diff --git a/include/linux/platform_data/irq-renesas-irqc.h b/include/linux/platform_data/irq-renesas-irqc.h new file mode 100644 index 000000000000..3ae17b3e00ed --- /dev/null +++ b/include/linux/platform_data/irq-renesas-irqc.h @@ -0,0 +1,27 @@ +/* + * Renesas IRQC Driver + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __IRQ_RENESAS_IRQC_H__ +#define __IRQ_RENESAS_IRQC_H__ + +struct renesas_irqc_config { + unsigned int irq_base; +}; + +#endif /* __IRQ_RENESAS_IRQC_H__ */ diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h new file mode 100644 index 000000000000..2f61311ae3e0 --- /dev/null +++ b/include/linux/reset-controller.h @@ -0,0 +1,51 @@ +#ifndef _LINUX_RESET_CONTROLLER_H_ +#define _LINUX_RESET_CONTROLLER_H_ + +#include <linux/list.h> + +struct reset_controller_dev; + +/** + * struct reset_control_ops + * + * @reset: for self-deasserting resets, does all necessary + * things to reset the device + * @assert: manually assert the reset line, if supported + * @deassert: manually deassert the reset line, if supported + */ +struct reset_control_ops { + int (*reset)(struct reset_controller_dev *rcdev, unsigned long id); + int (*assert)(struct reset_controller_dev *rcdev, unsigned long id); + int (*deassert)(struct reset_controller_dev *rcdev, unsigned long id); +}; + +struct module; +struct device_node; + +/** + * struct reset_controller_dev - reset controller entity that might + * provide multiple reset controls + * @ops: a pointer to device specific struct reset_control_ops + * @owner: kernel module of the reset controller driver + * @list: internal list of reset controller devices + * @of_node: corresponding device tree node as phandle target + * @of_reset_n_cells: number of cells in reset line specifiers + * @of_xlate: translation function to translate from specifier as found in the + * device tree to id as given to the reset control ops + * @nr_resets: number of reset controls in this reset controller device + */ +struct reset_controller_dev { + struct reset_control_ops *ops; + struct module *owner; + struct list_head list; + struct device_node *of_node; + int of_reset_n_cells; + int (*of_xlate)(struct reset_controller_dev *rcdev, + const struct of_phandle_args *reset_spec); + unsigned int nr_resets; +}; + +int reset_controller_register(struct reset_controller_dev *rcdev); +void reset_controller_unregister(struct reset_controller_dev *rcdev); + +#endif diff --git a/include/linux/reset.h b/include/linux/reset.h new file mode 100644 index 000000000000..6082247feab1 --- /dev/null +++ b/include/linux/reset.h @@ -0,0 +1,17 @@ +#ifndef _LINUX_RESET_H_ +#define _LINUX_RESET_H_ + +struct device; +struct reset_control; + +int reset_control_reset(struct reset_control *rstc); +int reset_control_assert(struct reset_control *rstc); +int reset_control_deassert(struct reset_control *rstc); + +struct reset_control *reset_control_get(struct device *dev, const char *id); +void reset_control_put(struct reset_control *rstc); +struct reset_control *devm_reset_control_get(struct device *dev, const char *id); + +int device_reset(struct device *dev); + +#endif diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h index 8deb22672ada..0f5a2fc69af9 100644 --- a/include/video/atmel_lcdc.h +++ b/include/video/atmel_lcdc.h @@ -31,6 +31,7 @@ #define ATMEL_LCDC_WIRING_BGR 0 #define ATMEL_LCDC_WIRING_RGB 1 +struct atmel_lcdfb_config; /* LCD Controller info data structure, stored in device platform_data */ struct atmel_lcdfb_info { @@ -61,7 +62,8 @@ struct atmel_lcdfb_info { void (*atmel_lcdfb_power_control)(int on); struct fb_monspecs *default_monspecs; u32 pseudo_palette[16]; - bool have_intensity_bit; + + struct atmel_lcdfb_config *config; }; #define ATMEL_LCDC_DMABADDR1 0x00 |
