diff options
| -rw-r--r-- | arch/m68k/include/asm/entry.h | 255 | ||||
| -rw-r--r-- | arch/m68k/include/asm/entry_mm.h | 128 | ||||
| -rw-r--r-- | arch/m68k/include/asm/entry_no.h | 181 | ||||
| -rw-r--r-- | arch/m68k/kernel/entry_no.S | 6 | ||||
| -rw-r--r-- | arch/m68k/platform/68328/entry.S | 18 | ||||
| -rw-r--r-- | arch/m68k/platform/68360/entry.S | 4 | ||||
| -rw-r--r-- | arch/m68k/platform/coldfire/entry.S | 6 |
7 files changed, 268 insertions, 330 deletions
diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h index 876eec6f2b52..c3c5a8643e15 100644 --- a/arch/m68k/include/asm/entry.h +++ b/arch/m68k/include/asm/entry.h @@ -1,5 +1,254 @@ -#ifdef __uClinux__ -#include "entry_no.h" +#ifndef __M68K_ENTRY_H +#define __M68K_ENTRY_H + +#include <asm/setup.h> +#include <asm/page.h> +#ifdef __ASSEMBLY__ +#include <asm/thread_info.h> +#endif + +/* + * Stack layout in 'ret_from_exception': + * + * This allows access to the syscall arguments in registers d1-d5 + * + * 0(sp) - d1 + * 4(sp) - d2 + * 8(sp) - d3 + * C(sp) - d4 + * 10(sp) - d5 + * 14(sp) - a0 + * 18(sp) - a1 + * 1C(sp) - a2 + * 20(sp) - d0 + * 24(sp) - orig_d0 + * 28(sp) - stack adjustment + * 2C(sp) - [ sr ] [ format & vector ] + * 2E(sp) - [ pc-hiword ] [ sr ] + * 30(sp) - [ pc-loword ] [ pc-hiword ] + * 32(sp) - [ format & vector ] [ pc-loword ] + * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^ + * M68K COLDFIRE + */ + +/* the following macro is used when enabling interrupts */ +#if defined(MACH_ATARI_ONLY) + /* block out HSYNC on the atari */ +#define ALLOWINT (~0x400) +#define MAX_NOINT_IPL 3 #else -#include "entry_mm.h" + /* portable version */ +#define ALLOWINT (~0x700) +#define MAX_NOINT_IPL 0 +#endif /* machine compilation types */ + +#ifdef __ASSEMBLY__ +/* + * This defines the normal kernel pt-regs layout. + * + * regs a3-a6 and d6-d7 are preserved by C code + * the kernel doesn't mess with usp unless it needs to + */ +#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */ + +#ifdef CONFIG_COLDFIRE +#ifdef CONFIG_COLDFIRE_SW_A7 +/* + * This is made a little more tricky on older ColdFires. There is no + * separate supervisor and user stack pointers. Need to artificially + * construct a usp in software... When doing this we need to disable + * interrupts, otherwise bad things will happen. + */ +.globl sw_usp +.globl sw_ksp + +.macro SAVE_ALL_SYS + move #0x2700,%sr /* disable intrs */ + btst #5,%sp@(2) /* from user? */ + bnes 6f /* no, skip */ + movel %sp,sw_usp /* save user sp */ + addql #8,sw_usp /* remove exception */ + movel sw_ksp,%sp /* kernel sp */ + subql #8,%sp /* room for exception */ + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ + movel sw_usp,%a0 /* get usp */ + movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */ + movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */ + bra 7f + 6: + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ + 7: +.endm + +.macro SAVE_ALL_INT + SAVE_ALL_SYS + moveq #-1,%d0 /* not system call entry */ + movel %d0,%sp@(PT_OFF_ORIG_D0) +.endm + +.macro RESTORE_USER + move #0x2700,%sr /* disable intrs */ + movel sw_usp,%a0 /* get usp */ + movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */ + movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */ + moveml %sp@,%d1-%d5/%a0-%a2 + lea %sp@(32),%sp /* space for 8 regs */ + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + addql #8,%sp /* remove exception */ + movel %sp,sw_ksp /* save ksp */ + subql #8,sw_usp /* set exception */ + movel sw_usp,%sp /* restore usp */ + rte +.endm + +.macro RDUSP + movel sw_usp,%a3 +.endm + +.macro WRUSP + movel %a3,sw_usp +.endm + +#else /* !CONFIG_COLDFIRE_SW_A7 */ +/* + * Modern ColdFire parts have separate supervisor and user stack + * pointers. Simple load and restore macros for this case. + */ +.macro SAVE_ALL_SYS + move #0x2700,%sr /* disable intrs */ + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ +.endm + +.macro SAVE_ALL_INT + move #0x2700,%sr /* disable intrs */ + clrl %sp@- /* stkadj */ + pea -1:w /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ +.endm + +.macro RESTORE_USER + moveml %sp@,%d1-%d5/%a0-%a2 + lea %sp@(32),%sp /* space for 8 regs */ + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + rte +.endm + +.macro RDUSP + /*move %usp,%a3*/ + .word 0x4e6b +.endm + +.macro WRUSP + /*move %a3,%usp*/ + .word 0x4e63 +.endm + +#endif /* !CONFIG_COLDFIRE_SW_A7 */ + +.macro SAVE_SWITCH_STACK + lea %sp@(-24),%sp /* 6 regs */ + moveml %a3-%a6/%d6-%d7,%sp@ +.endm + +.macro RESTORE_SWITCH_STACK + moveml %sp@,%a3-%a6/%d6-%d7 + lea %sp@(24),%sp /* 6 regs */ +.endm + +#else /* !CONFIG_COLDFIRE */ + +/* + * All other types of m68k parts (68000, 680x0, CPU32) have the same + * entry and exit code. + */ + +/* + * a -1 in the orig_d0 field signifies + * that the stack frame is NOT for syscall + */ +.macro SAVE_ALL_INT + clrl %sp@- /* stk_adj */ + pea -1:w /* orig d0 */ + movel %d0,%sp@- /* d0 */ + moveml %d1-%d5/%a0-%a2,%sp@- +.endm + +.macro SAVE_ALL_SYS + clrl %sp@- /* stk_adj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + moveml %d1-%d5/%a0-%a2,%sp@- +.endm + +.macro RESTORE_ALL + moveml %sp@+,%a0-%a2/%d1-%d5 + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stk adj */ + rte +.endm + + +.macro SAVE_SWITCH_STACK + moveml %a3-%a6/%d6-%d7,%sp@- +.endm + +.macro RESTORE_SWITCH_STACK + moveml %sp@+,%a3-%a6/%d6-%d7 +.endm + +#endif /* !CONFIG_COLDFIRE */ + +/* + * Register %a2 is reserved and set to current task on MMU enabled systems. + * Non-MMU systems do not reserve %a2 in this way, and this definition is + * not used for them. + */ +#define curptr a2 + +#define GET_CURRENT(tmp) get_current tmp +.macro get_current reg=%d0 + movel %sp,\reg + andw #-THREAD_SIZE,\reg + movel \reg,%curptr + movel %curptr@,%curptr +.endm + +#else /* C source */ + +#define STR(X) STR1(X) +#define STR1(X) #X + +#define SAVE_ALL_INT \ + "clrl %%sp@-;" /* stk_adj */ \ + "pea -1:w;" /* orig d0 = -1 */ \ + "movel %%d0,%%sp@-;" /* d0 */ \ + "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-" + +#define GET_CURRENT(tmp) \ + "movel %%sp,"#tmp"\n\t" \ + "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \ + "movel "#tmp",%%a2\n\t" \ + "movel %%a2@,%%a2" + #endif + +#endif /* __M68K_ENTRY_H */ diff --git a/arch/m68k/include/asm/entry_mm.h b/arch/m68k/include/asm/entry_mm.h deleted file mode 100644 index 73b8c8fbed9c..000000000000 --- a/arch/m68k/include/asm/entry_mm.h +++ /dev/null @@ -1,128 +0,0 @@ -#ifndef __M68K_ENTRY_H -#define __M68K_ENTRY_H - -#include <asm/setup.h> -#include <asm/page.h> -#ifdef __ASSEMBLY__ -#include <asm/thread_info.h> -#endif - -/* - * Stack layout in 'ret_from_exception': - * - * This allows access to the syscall arguments in registers d1-d5 - * - * 0(sp) - d1 - * 4(sp) - d2 - * 8(sp) - d3 - * C(sp) - d4 - * 10(sp) - d5 - * 14(sp) - a0 - * 18(sp) - a1 - * 1C(sp) - a2 - * 20(sp) - d0 - * 24(sp) - orig_d0 - * 28(sp) - stack adjustment - * 2C(sp) - sr - * 2E(sp) - pc - * 32(sp) - format & vector - */ - -/* - * 97/05/14 Andreas: Register %a2 is now set to the current task throughout - * the whole kernel. - */ - -/* the following macro is used when enabling interrupts */ -#if defined(MACH_ATARI_ONLY) - /* block out HSYNC on the atari */ -#define ALLOWINT (~0x400) -#define MAX_NOINT_IPL 3 -#else - /* portable version */ -#define ALLOWINT (~0x700) -#define MAX_NOINT_IPL 0 -#endif /* machine compilation types */ - -#ifdef __ASSEMBLY__ - -#define curptr a2 - -LFLUSH_I_AND_D = 0x00000808 - -#define SAVE_ALL_INT save_all_int -#define SAVE_ALL_SYS save_all_sys -#define RESTORE_ALL restore_all -/* - * This defines the normal kernel pt-regs layout. - * - * regs a3-a6 and d6-d7 are preserved by C code - * the kernel doesn't mess with usp unless it needs to - */ - -/* - * a -1 in the orig_d0 field signifies - * that the stack frame is NOT for syscall - */ -.macro save_all_int - clrl %sp@- | stk_adj - pea -1:w | orig d0 - movel %d0,%sp@- | d0 - moveml %d1-%d5/%a0-%a1/%curptr,%sp@- -.endm - -.macro save_all_sys - clrl %sp@- | stk_adj - movel %d0,%sp@- | orig d0 - movel %d0,%sp@- | d0 - moveml %d1-%d5/%a0-%a1/%curptr,%sp@- -.endm - -.macro restore_all - moveml %sp@+,%a0-%a1/%curptr/%d1-%d5 - movel %sp@+,%d0 - addql #4,%sp | orig d0 - addl %sp@+,%sp | stk adj - rte -.endm - -#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */ - -#define SAVE_SWITCH_STACK save_switch_stack -#define RESTORE_SWITCH_STACK restore_switch_stack -#define GET_CURRENT(tmp) get_current tmp - -.macro save_switch_stack - moveml %a3-%a6/%d6-%d7,%sp@- -.endm - -.macro restore_switch_stack - moveml %sp@+,%a3-%a6/%d6-%d7 -.endm - -.macro get_current reg=%d0 - movel %sp,\reg - andw #-THREAD_SIZE,\reg - movel \reg,%curptr - movel %curptr@,%curptr -.endm - -#else /* C source */ - -#define STR(X) STR1(X) -#define STR1(X) #X - -#define SAVE_ALL_INT \ - "clrl %%sp@-;" /* stk_adj */ \ - "pea -1:w;" /* orig d0 = -1 */ \ - "movel %%d0,%%sp@-;" /* d0 */ \ - "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-" -#define GET_CURRENT(tmp) \ - "movel %%sp,"#tmp"\n\t" \ - "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \ - "movel "#tmp",%%a2\n\t" \ - "movel %%a2@,%%a2" - -#endif - -#endif /* __M68K_ENTRY_H */ diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h deleted file mode 100644 index 68611e3dbb1d..000000000000 --- a/arch/m68k/include/asm/entry_no.h +++ /dev/null @@ -1,181 +0,0 @@ -#ifndef __M68KNOMMU_ENTRY_H -#define __M68KNOMMU_ENTRY_H - -#include <asm/setup.h> -#include <asm/page.h> - -/* - * Stack layout in 'ret_from_exception': - * - * This allows access to the syscall arguments in registers d1-d5 - * - * 0(sp) - d1 - * 4(sp) - d2 - * 8(sp) - d3 - * C(sp) - d4 - * 10(sp) - d5 - * 14(sp) - a0 - * 18(sp) - a1 - * 1C(sp) - a2 - * 20(sp) - d0 - * 24(sp) - orig_d0 - * 28(sp) - stack adjustment - * 2C(sp) - [ sr ] [ format & vector ] - * 2E(sp) - [ pc-hiword ] [ sr ] - * 30(sp) - [ pc-loword ] [ pc-hiword ] - * 32(sp) - [ format & vector ] [ pc-loword ] - * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^ - * M68K COLDFIRE - */ - -#define ALLOWINT (~0x700) - -#ifdef __ASSEMBLY__ - -#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */ - -/* - * This defines the normal kernel pt-regs layout. - * - * regs are a2-a6 and d6-d7 preserved by C code - * the kernel doesn't mess with usp unless it needs to - */ - -#ifdef CONFIG_COLDFIRE -#ifdef CONFIG_COLDFIRE_SW_A7 -/* - * This is made a little more tricky on older ColdFires. There is no - * separate supervisor and user stack pointers. Need to artificially - * construct a usp in software... When doing this we need to disable - * interrupts, otherwise bad things will happen. - */ -.globl sw_usp -.globl sw_ksp - -.macro SAVE_ALL - move #0x2700,%sr /* disable intrs */ - btst #5,%sp@(2) /* from user? */ - bnes 6f /* no, skip */ - movel %sp,sw_usp /* save user sp */ - addql #8,sw_usp /* remove exception */ - movel sw_ksp,%sp /* kernel sp */ - subql #8,%sp /* room for exception */ - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ - movel sw_usp,%a0 /* get usp */ - movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */ - movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */ - bra 7f - 6: - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ - 7: -.endm - -.macro RESTORE_USER - move #0x2700,%sr /* disable intrs */ - movel sw_usp,%a0 /* get usp */ - movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */ - movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */ - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - addql #8,%sp /* remove exception */ - movel %sp,sw_ksp /* save ksp */ - subql #8,sw_usp /* set exception */ - movel sw_usp,%sp /* restore usp */ - rte -.endm - -.macro RDUSP - movel sw_usp,%a3 -.endm - -.macro WRUSP - movel %a3,sw_usp -.endm - -#else /* !CONFIG_COLDFIRE_SW_A7 */ -/* - * Modern ColdFire parts have separate supervisor and user stack - * pointers. Simple load and restore macros for this case. - */ -.macro SAVE_ALL - move #0x2700,%sr /* disable intrs */ - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ -.endm - -.macro RESTORE_USER - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -.macro RDUSP - /*move %usp,%a3*/ - .word 0x4e6b -.endm - -.macro WRUSP - /*move %a3,%usp*/ - .word 0x4e63 -.endm - -#endif /* !CONFIG_COLDFIRE_SW_A7 */ - -.macro SAVE_SWITCH_STACK - lea %sp@(-24),%sp /* 6 regs */ - moveml %a3-%a6/%d6-%d7,%sp@ -.endm - -.macro RESTORE_SWITCH_STACK - moveml %sp@,%a3-%a6/%d6-%d7 - lea %sp@(24),%sp /* 6 regs */ -.endm - -#else /* !CONFIG_COLDFIRE */ - -/* - * Standard 68k interrupt entry and exit macros. - */ -.macro SAVE_ALL - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - moveml %d1-%d5/%a0-%a2,%sp@- -.endm - -.macro RESTORE_ALL - moveml %sp@+,%a0-%a2/%d1-%d5 - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -.macro SAVE_SWITCH_STACK - moveml %a3-%a6/%d6-%d7,%sp@- -.endm - -.macro RESTORE_SWITCH_STACK - moveml %sp@+,%a3-%a6/%d6-%d7 -.endm - -#endif /* !COLDFIRE_SW_A7 */ -#endif /* __ASSEMBLY__ */ -#endif /* __M68KNOMMU_ENTRY_H */ diff --git a/arch/m68k/kernel/entry_no.S b/arch/m68k/kernel/entry_no.S index 5f0f6b598b5a..1b4289061a64 100644 --- a/arch/m68k/kernel/entry_no.S +++ b/arch/m68k/kernel/entry_no.S @@ -43,7 +43,7 @@ .globl sys_vfork ENTRY(buserr) - SAVE_ALL + SAVE_ALL_INT moveq #-1,%d0 movel %d0,%sp@(PT_OFF_ORIG_D0) movel %sp,%sp@- /* stack frame pointer argument */ @@ -52,7 +52,7 @@ ENTRY(buserr) jra ret_from_exception ENTRY(trap) - SAVE_ALL + SAVE_ALL_INT moveq #-1,%d0 movel %d0,%sp@(PT_OFF_ORIG_D0) movel %sp,%sp@- /* stack frame pointer argument */ @@ -64,7 +64,7 @@ ENTRY(trap) .globl dbginterrupt ENTRY(dbginterrupt) - SAVE_ALL + SAVE_ALL_INT moveq #-1,%d0 movel %d0,%sp@(PT_OFF_ORIG_D0) movel %sp,%sp@- /* stack frame pointer argument */ diff --git a/arch/m68k/platform/68328/entry.S b/arch/m68k/platform/68328/entry.S index 293e1eba9acc..5c39b80ed7de 100644 --- a/arch/m68k/platform/68328/entry.S +++ b/arch/m68k/platform/68328/entry.S @@ -67,7 +67,7 @@ ret_from_signal: jra ret_from_exception ENTRY(system_call) - SAVE_ALL + SAVE_ALL_SYS /* save top of frame*/ pea %sp@ @@ -129,7 +129,7 @@ Lsignal_return: * This is the main interrupt handler, responsible for calling process_int() */ inthandler1: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -140,7 +140,7 @@ inthandler1: bra ret_from_interrupt inthandler2: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -151,7 +151,7 @@ inthandler2: bra ret_from_interrupt inthandler3: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -162,7 +162,7 @@ inthandler3: bra ret_from_interrupt inthandler4: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -173,7 +173,7 @@ inthandler4: bra ret_from_interrupt inthandler5: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -184,7 +184,7 @@ inthandler5: bra ret_from_interrupt inthandler6: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -195,7 +195,7 @@ inthandler6: bra ret_from_interrupt inthandler7: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -206,7 +206,7 @@ inthandler7: bra ret_from_interrupt inthandler: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 diff --git a/arch/m68k/platform/68360/entry.S b/arch/m68k/platform/68360/entry.S index abbb89672ea0..aa47d1d49929 100644 --- a/arch/m68k/platform/68360/entry.S +++ b/arch/m68k/platform/68360/entry.S @@ -63,7 +63,7 @@ ret_from_signal: jra ret_from_exception ENTRY(system_call) - SAVE_ALL + SAVE_ALL_SYS /* save top of frame*/ pea %sp@ @@ -125,7 +125,7 @@ Lsignal_return: * This is the main interrupt handler, responsible for calling do_IRQ() */ inthandler: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and.l #0x3ff, %d0 lsr.l #0x02, %d0 diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S index bd27242c2f43..3157461a8d1d 100644 --- a/arch/m68k/platform/coldfire/entry.S +++ b/arch/m68k/platform/coldfire/entry.S @@ -61,7 +61,7 @@ enosys: bra 1f ENTRY(system_call) - SAVE_ALL + SAVE_ALL_SYS move #0x2000,%sr /* enable intrs again */ cmpl #NR_syscalls,%d0 @@ -165,9 +165,7 @@ Lsignal_return: * sources). Calls up to high level code to do all the work. */ ENTRY(inthandler) - SAVE_ALL - moveq #-1,%d0 - movel %d0,%sp@(PT_OFF_ORIG_D0) + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */ andl #0x03fc,%d0 /* mask out vector only */ |
