summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/configs/csb637_defconfig2
-rw-r--r--arch/arm/configs/kb9202_defconfig2
-rw-r--r--arch/arm/mach-at91rm9200/Kconfig30
-rw-r--r--drivers/mmc/Kconfig8
-rw-r--r--drivers/mmc/Makefile2
-rw-r--r--drivers/usb/Kconfig2
-rw-r--r--drivers/usb/gadget/Kconfig2
-rw-r--r--drivers/usb/host/ohci-hcd.c5
9 files changed, 42 insertions, 13 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ce00c570459d..43bd17bfc381 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -583,7 +583,7 @@ config LEDS
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91RM9200 || MACH_TRIZEPS4
+ ARCH_AT91 || MACH_TRIZEPS4
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index df8595ac031f..abf33520b709 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -623,7 +623,7 @@ CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
-# CONFIG_AT91_RTC is not set
+# CONFIG_AT91RM9200_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index b4cd4b414836..9ab0e0a66fd5 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -437,7 +437,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
-# CONFIG_AT91_RTC is not set
+# CONFIG_AT91RM9200_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig
index 8d4432647894..9f11db8af233 100644
--- a/arch/arm/mach-at91rm9200/Kconfig
+++ b/arch/arm/mach-at91rm9200/Kconfig
@@ -92,6 +92,13 @@ if ARCH_AT91SAM9260
comment "AT91SAM9260 Board Type"
+config MACH_AT91SAM9260EK
+ bool "Atmel AT91SAM9260-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9260
+ help
+ Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
endif
# ----------------------------------------------------------
@@ -100,8 +107,31 @@ if ARCH_AT91SAM9261
comment "AT91SAM9261 Board Type"
+config MACH_AT91SAM9261EK
+ bool "Atmel AT91SAM9261-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9261
+ help
+ Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
endif
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+ bool "Enable DataFlash Card support"
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+ help
+ Enable support for the DataFlash card.
+
+config MTD_NAND_AT91_BUSWIDTH_16
+ bool "Enable 16-bit data bus interface to NAND flash"
+ depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+ help
+ On AT91SAM926x boards both types of NAND flash can be present
+ (8 and 16 bit data bus width).
# ----------------------------------------------------------
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index ea41852ec8cd..fbef8da60043 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -91,11 +91,11 @@ config MMC_AU1X
If unsure, say N.
-config MMC_AT91RM9200
- tristate "AT91RM9200 SD/MMC Card Interface support"
- depends on ARCH_AT91RM9200 && MMC
+config MMC_AT91
+ tristate "AT91 SD/MMC Card Interface support"
+ depends on ARCH_AT91 && MMC
help
- This selects the AT91RM9200 MCI controller.
+ This selects the AT91 MCI controller.
If unsure, say N.
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index acfd4de0aba5..83ffb9326a54 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
-obj-$(CONFIG_MMC_AT91RM9200) += at91_mci.o
+obj-$(CONFIG_MMC_AT91) += at91_mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
mmc_core-y := mmc.o mmc_sysfs.o
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index f9b1719b9a37..9980a4ddfed9 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -24,7 +24,7 @@ config USB_ARCH_HAS_OHCI
default y if ARCH_S3C2410
default y if PXA27x
default y if ARCH_EP93XX
- default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
+ default y if ARCH_AT91
default y if ARCH_PNX4008
# PPC:
default y if STB03xxx
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bbbc82a8336a..4097a86c4b5e 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -189,7 +189,7 @@ config USB_OTG
config USB_GADGET_AT91
boolean "AT91 USB Device Port"
- depends on ARCH_AT91RM9200
+ depends on ARCH_AT91
select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index ea4714e557e4..4776b3bdf9c8 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -935,7 +935,7 @@ MODULE_LICENSE ("GPL");
#include "ohci-ppc-soc.c"
#endif
-#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261)
+#ifdef CONFIG_ARCH_AT91
#include "ohci-at91.c"
#endif
@@ -952,8 +952,7 @@ MODULE_LICENSE ("GPL");
|| defined (CONFIG_ARCH_EP93XX) \
|| defined (CONFIG_SOC_AU1X00) \
|| defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
- || defined (CONFIG_ARCH_AT91RM9200) \
- || defined (CONFIG_ARCH_AT91SAM9261) \
+ || defined (CONFIG_ARCH_AT91) \
|| defined (CONFIG_ARCH_PNX4008) \
)
#error "missing bus glue for ohci-hcd"
OpenPOWER on IntegriCloud