diff options
| -rw-r--r-- | drivers/hwmon/w83792d.c | 61 |
1 files changed, 18 insertions, 43 deletions
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 2be16194ddf3..38978851333f 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -1273,58 +1273,33 @@ w83792d_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) return -ENODEV; } - /* The w83792d may be stuck in some other bank than bank 0. This may - make reading other information impossible. Specify a force=... or - force_*=... parameter, and the Winbond will be reset to the right - bank. */ - if (kind < 0) { - if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) { - return -ENODEV; - } - val1 = w83792d_read_value(client, W83792D_REG_BANK); - val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); - /* Check for Winbond ID if in bank 0 */ - if (!(val1 & 0x07)) { /* is Bank0 */ - if (((!(val1 & 0x80)) && (val2 != 0xa3)) || - ((val1 & 0x80) && (val2 != 0x5c))) { - return -ENODEV; - } - } - /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR - should match */ - if (w83792d_read_value(client, - W83792D_REG_I2C_ADDR) != address) { + if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) + return -ENODEV; + + val1 = w83792d_read_value(client, W83792D_REG_BANK); + val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); + /* Check for Winbond ID if in bank 0 */ + if (!(val1 & 0x07)) { /* is Bank0 */ + if ((!(val1 & 0x80) && val2 != 0xa3) || + ( (val1 & 0x80) && val2 != 0x5c)) return -ENODEV; - } } + /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR + should match */ + if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address) + return -ENODEV; - /* We have either had a force parameter, or we have already detected the - Winbond. Put it now into bank 0 and Vendor ID High Byte */ + /* Put it now into bank 0 and Vendor ID High Byte */ w83792d_write_value(client, W83792D_REG_BANK, (w83792d_read_value(client, W83792D_REG_BANK) & 0x78) | 0x80); /* Determine the chip type. */ - if (kind <= 0) { - /* get vendor ID */ - val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); - if (val2 != 0x5c) { /* the vendor is NOT Winbond */ - return -ENODEV; - } - val1 = w83792d_read_value(client, W83792D_REG_WCHIPID); - if (val1 == 0x7a) { - kind = w83792d; - } else { - if (kind == 0) - dev_warn(&adapter->dev, - "w83792d: Ignoring 'force' parameter for" - " unknown chip at adapter %d, address" - " 0x%02x\n", i2c_adapter_id(adapter), - address); - return -ENODEV; - } - } + val1 = w83792d_read_value(client, W83792D_REG_WCHIPID); + val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); + if (val1 != 0x7a || val2 != 0x5c) + return -ENODEV; strlcpy(info->type, "w83792d", I2C_NAME_SIZE); |
