diff options
| -rw-r--r-- | arch/sh/Makefile | 1 | ||||
| -rw-r--r-- | arch/sh/boards/renesas/rts7751r2d/irq.c | 4 | ||||
| -rw-r--r-- | arch/sh/boards/renesas/rts7751r2d/setup.c | 73 | ||||
| -rw-r--r-- | arch/sh/cchips/voyagergx/Makefile | 9 | ||||
| -rw-r--r-- | arch/sh/cchips/voyagergx/consistent.c | 121 | ||||
| -rw-r--r-- | arch/sh/cchips/voyagergx/irq.c | 101 | ||||
| -rw-r--r-- | arch/sh/cchips/voyagergx/setup.c | 37 | ||||
| -rw-r--r-- | include/asm-sh/voyagergx.h | 341 |
8 files changed, 39 insertions, 648 deletions
diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 292d8618248d..e04b19293652 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -138,7 +138,6 @@ endif # Companion chips core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/ -core-$(CONFIG_MFD_SM501) += arch/sh/cchips/voyagergx/ cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2 cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index 3fecd49e0d2a..8e49f6e51247 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -13,7 +13,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <asm/voyagergx.h> #include <asm/rts7751r2d.h> #define R2D_NR_IRL 13 @@ -153,7 +152,4 @@ void __init init_rts7751r2d_IRQ(void) } register_intc_controller(d); -#ifdef CONFIG_MFD_SM501 - setup_voyagergx_irq(); -#endif } diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index dc143c10cd18..8cb496617073 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -13,36 +13,13 @@ #include <linux/pata_platform.h> #include <linux/serial_8250.h> #include <linux/sm501.h> +#include <linux/sm501-regs.h> #include <linux/pm.h> #include <linux/fb.h> #include <asm/machvec.h> #include <asm/rts7751r2d.h> -#include <asm/voyagergx.h> #include <asm/io.h> -static void __init voyagergx_serial_init(void) -{ - unsigned long val; - - /* - * GPIO Control - */ - val = readl((void __iomem *)GPIO_MUX_HIGH); - val |= 0x00001fe0; - writel(val, (void __iomem *)GPIO_MUX_HIGH); - - /* - * Power Mode Gate - */ - val = readl((void __iomem *)POWER_MODE0_GATE); - val |= (POWER_MODE0_GATE_U0 | POWER_MODE0_GATE_U1); - writel(val, (void __iomem *)POWER_MODE0_GATE); - - val = readl((void __iomem *)POWER_MODE1_GATE); - val |= (POWER_MODE1_GATE_U0 | POWER_MODE1_GATE_U1); - writel(val, (void __iomem *)POWER_MODE1_GATE); -} - static struct resource cf_ide_resources[] = { [0] = { .start = PA_AREA5_IO + 0x1000, @@ -94,11 +71,11 @@ static struct platform_device heartbeat_device = { #ifdef CONFIG_MFD_SM501 static struct plat_serial8250_port uart_platform_data[] = { { - .membase = (void __iomem *)VOYAGER_UART_BASE, - .mapbase = VOYAGER_UART_BASE, + .membase = (void __iomem *)0xb3e30000, + .mapbase = 0xb3e30000, .iotype = UPIO_MEM, - .irq = IRQ_SM501_U0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .irq = IRQ_VOYAGER, + .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, .regshift = 2, .uartclk = (9600 * 16), }, @@ -125,7 +102,7 @@ static struct resource sm501_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = IRQ_SM501_CV, + .start = IRQ_VOYAGER, .flags = IORESOURCE_IRQ, }, }; @@ -167,7 +144,15 @@ static struct sm501_platdata_fb sm501_fb_pdata = { .flags = SM501_FBPD_SWAP_FB_ENDIAN, }; +static struct sm501_initdata sm501_initdata = { + .gpio_high = { + .set = 0x00001fe0, + .mask = 0x0, + }, +}; + static struct sm501_platdata sm501_platform_data = { + .init = &sm501_initdata, .fb = &sm501_fb_pdata, }; @@ -237,6 +222,7 @@ u8 rts7751r2d_readb(void __iomem *addr) */ static void __init rts7751r2d_setup(char **cmdline_p) { + void __iomem *sm501_reg; u16 ver = ctrl_inw(PA_VERREG); printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); @@ -247,7 +233,30 @@ static void __init rts7751r2d_setup(char **cmdline_p) ctrl_outw(0x0000, PA_OUTPORT); pm_power_off = rts7751r2d_power_off; - voyagergx_serial_init(); + /* sm501 dram configuration: + * ColSizeX = 11 - External Memory Column Size: 256 words. + * APX = 1 - External Memory Active to Pre-Charge Delay: 7 clocks. + * RstX = 1 - External Memory Reset: Normal. + * Rfsh = 1 - Local Memory Refresh to Command Delay: 12 clocks. + * BwC = 1 - Local Memory Block Write Cycle Time: 2 clocks. + * BwP = 1 - Local Memory Block Write to Pre-Charge Delay: 1 clock. + * AP = 1 - Internal Memory Active to Pre-Charge Delay: 7 clocks. + * Rst = 1 - Internal Memory Reset: Normal. + * RA = 1 - Internal Memory Remain in Active State: Do not remain. + */ + + sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL; + writel(readl(sm501_reg) | 0x00f107c0, sm501_reg); + + /* + * Power Mode Gate - Enable UART0 + */ + + sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_0_GATE; + writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg); + + sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_1_GATE; + writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg); } /* @@ -260,8 +269,4 @@ static struct sh_machine_vector mv_rts7751r2d __initmv = { .mv_irq_demux = rts7751r2d_irq_demux, .mv_writeb = rts7751r2d_writeb, .mv_readb = rts7751r2d_readb, -#if defined(CONFIG_MFD_SM501) && defined(CONFIG_USB_OHCI_HCD) - .mv_consistent_alloc = voyagergx_consistent_alloc, - .mv_consistent_free = voyagergx_consistent_free, -#endif }; diff --git a/arch/sh/cchips/voyagergx/Makefile b/arch/sh/cchips/voyagergx/Makefile deleted file mode 100644 index f73963cb3744..000000000000 --- a/arch/sh/cchips/voyagergx/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for VoyagerGX -# - -obj-y := irq.o setup.o - -obj-$(CONFIG_USB_OHCI_HCD) += consistent.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/sh/cchips/voyagergx/consistent.c b/arch/sh/cchips/voyagergx/consistent.c deleted file mode 100644 index 07e8b9c5a531..000000000000 --- a/arch/sh/cchips/voyagergx/consistent.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * arch/sh/cchips/voyagergx/consistent.c - * - * Copyright (C) 2004 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/mm.h> -#include <linux/dma-mapping.h> -#include <linux/slab.h> -#include <linux/list.h> -#include <linux/types.h> -#include <linux/module.h> -#include <linux/device.h> -#include <asm/io.h> - - -struct voya_alloc_entry { - struct list_head list; - unsigned long ofs; - unsigned long len; -}; - -static DEFINE_SPINLOCK(voya_list_lock); -static LIST_HEAD(voya_alloc_list); - -#define OHCI_SRAM_START 0xb0000000 -#define OHCI_HCCA_SIZE 0x100 -#define OHCI_SRAM_SIZE 0x10000 - -#define VOYAGER_OHCI_NAME "voyager-ohci" - -void *voyagergx_consistent_alloc(struct device *dev, size_t size, - dma_addr_t *handle, gfp_t flag) -{ - struct list_head *list = &voya_alloc_list; - struct voya_alloc_entry *entry; - unsigned long start, end; - unsigned long flags; - - /* - * The SM501 contains an integrated 8051 with its own SRAM. - * Devices within the cchip can all hook into the 8051 SRAM. - * We presently use this for the OHCI. - * - * Everything else goes through consistent_alloc(). - */ - if (!dev || strcmp(dev->driver->name, VOYAGER_OHCI_NAME)) - return NULL; - - start = OHCI_SRAM_START + OHCI_HCCA_SIZE; - - entry = kmalloc(sizeof(struct voya_alloc_entry), GFP_ATOMIC); - if (!entry) - return ERR_PTR(-ENOMEM); - - entry->len = (size + 15) & ~15; - - /* - * The basis for this allocator is dwmw2's malloc.. the - * Matrox allocator :-) - */ - spin_lock_irqsave(&voya_list_lock, flags); - list_for_each(list, &voya_alloc_list) { - struct voya_alloc_entry *p; - - p = list_entry(list, struct voya_alloc_entry, list); - - if (p->ofs - start >= size) - goto out; - - start = p->ofs + p->len; - } - - end = start + (OHCI_SRAM_SIZE - OHCI_HCCA_SIZE); - list = &voya_alloc_list; - - if (end - start >= size) { -out: - entry->ofs = start; - list_add_tail(&entry->list, list); - spin_unlock_irqrestore(&voya_list_lock, flags); - - *handle = start; - return (void *)start; - } - - kfree(entry); - spin_unlock_irqrestore(&voya_list_lock, flags); - - return ERR_PTR(-EINVAL); -} - -int voyagergx_consistent_free(struct device *dev, size_t size, - void *vaddr, dma_addr_t handle) -{ - struct voya_alloc_entry *entry; - unsigned long flags; - - if (!dev || strcmp(dev->driver->name, VOYAGER_OHCI_NAME)) - return -EINVAL; - - spin_lock_irqsave(&voya_list_lock, flags); - list_for_each_entry(entry, &voya_alloc_list, list) { - if (entry->ofs != handle) - continue; - - list_del(&entry->list); - kfree(entry); - - break; - } - spin_unlock_irqrestore(&voya_list_lock, flags); - - return 0; -} - -EXPORT_SYMBOL(voyagergx_consistent_alloc); -EXPORT_SYMBOL(voyagergx_consistent_free); diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c deleted file mode 100644 index e7e78c612fad..000000000000 --- a/arch/sh/cchips/voyagergx/irq.c +++ /dev/null @@ -1,101 +0,0 @@ -/* -------------------------------------------------------------------- */ -/* setup_voyagergx.c: */ -/* -------------------------------------------------------------------- */ -/* This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Copyright 2003 (c) Lineo uSolutions,Inc. -*/ -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/io.h> -#include <asm/voyagergx.h> -#include <asm/rts7751r2d.h> - -enum { - UNUSED = 0, - - /* voyager specific interrupt sources */ - UP, G54, G53, G52, G51, G50, G49, G48, - I2C, PW, DMA, PCI, I2S, AC, US, - U1, U0, CV, MC, S1, S0, - UH, TWOD, ZD, PV, CI, -}; - -static struct intc_vect vectors[] __initdata = { - INTC_IRQ(UP, IRQ_SM501_UP), INTC_IRQ(G54, IRQ_SM501_G54), - INTC_IRQ(G53, IRQ_SM501_G53), INTC_IRQ(G52, IRQ_SM501_G52), - INTC_IRQ(G51, IRQ_SM501_G51), INTC_IRQ(G50, IRQ_SM501_G50), - INTC_IRQ(G49, IRQ_SM501_G49), INTC_IRQ(G48, IRQ_SM501_G48), - INTC_IRQ(I2C, IRQ_SM501_I2C), INTC_IRQ(PW, IRQ_SM501_PW), - INTC_IRQ(DMA, IRQ_SM501_DMA), INTC_IRQ(PCI, IRQ_SM501_PCI), - INTC_IRQ(I2S, IRQ_SM501_I2S), INTC_IRQ(AC, IRQ_SM501_AC), - INTC_IRQ(US, IRQ_SM501_US), INTC_IRQ(U1, IRQ_SM501_U1), - INTC_IRQ(U0, IRQ_SM501_U0), INTC_IRQ(CV, IRQ_SM501_CV), - INTC_IRQ(MC, IRQ_SM501_MC), INTC_IRQ(S1, IRQ_SM501_S1), - INTC_IRQ(S0, IRQ_SM501_S0), INTC_IRQ(UH, IRQ_SM501_UH), - INTC_IRQ(TWOD, IRQ_SM501_2D), INTC_IRQ(ZD, IRQ_SM501_ZD), - INTC_IRQ(PV, IRQ_SM501_PV), INTC_IRQ(CI, IRQ_SM501_CI), -}; - -static struct intc_mask_reg mask_registers[] __initdata = { - { VOYAGER_INT_MASK, 0, 32, /* "Interrupt Mask", MMIO_base + 0x30 */ - { UP, G54, G53, G52, G51, G50, G49, G48, - I2C, PW, 0, DMA, PCI, I2S, AC, US, - 0, 0, U1, U0, CV, MC, S1, S0, - 0, UH, 0, 0, TWOD, ZD, PV, CI } }, -}; - -static DECLARE_INTC_DESC(intc_desc, "voyagergx", vectors, - NULL, mask_registers, NULL, NULL); - -static unsigned int voyagergx_stat2irq[32] = { - IRQ_SM501_CI, IRQ_SM501_PV, IRQ_SM501_ZD, IRQ_SM501_2D, - 0, 0, IRQ_SM501_UH, 0, - IRQ_SM501_S0, IRQ_SM501_S1, IRQ_SM501_MC, IRQ_SM501_CV, - IRQ_SM501_U0, IRQ_SM501_U1, 0, 0, - IRQ_SM501_US, IRQ_SM501_AC, IRQ_SM501_I2S, IRQ_SM501_PCI, - IRQ_SM501_DMA, 0, IRQ_SM501_PW, IRQ_SM501_I2C, - IRQ_SM501_G48, IRQ_SM501_G49, IRQ_SM501_G50, IRQ_SM501_G51, - IRQ_SM501_G52, IRQ_SM501_G53, IRQ_SM501_G54, IRQ_SM501_UP -}; - -static void voyagergx_irq_demux(unsigned int irq, struct irq_desc *desc) -{ - unsigned long intv = ctrl_inl(INT_STATUS); - struct irq_desc *ext_desc; - unsigned int ext_irq; - unsigned int k = 0; - - while (intv) { - ext_irq = voyagergx_stat2irq[k]; - if (ext_irq && (intv & 1)) { - ext_desc = irq_desc + ext_irq; - handle_level_irq(ext_irq, ext_desc); - } - intv >>= 1; - k++; - } -} - -void __init setup_voyagergx_irq(void) -{ - printk(KERN_INFO "VoyagerGX on irq %d (mapped into %d to %d)\n", - IRQ_VOYAGER, - VOYAGER_IRQ_BASE, - VOYAGER_IRQ_BASE + VOYAGER_IRQ_NUM - 1); - - register_intc_controller(&intc_desc); - set_irq_chained_handler(IRQ_VOYAGER, voyagergx_irq_demux); -} diff --git a/arch/sh/cchips/voyagergx/setup.c b/arch/sh/cchips/voyagergx/setup.c deleted file mode 100644 index 33f03027c193..000000000000 --- a/arch/sh/cchips/voyagergx/setup.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/sh/cchips/voyagergx/setup.c - * - * Setup routines for VoyagerGX cchip. - * - * Copyright (C) 2003 Lineo uSolutions, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/init.h> -#include <linux/module.h> -#include <asm/io.h> -#include <asm/voyagergx.h> - -static int __init setup_voyagergx(void) -{ - unsigned long val; - - val = readl((void __iomem *)DRAM_CTRL); - val |= (DRAM_CTRL_CPU_COLUMN_SIZE_256 | - DRAM_CTRL_CPU_ACTIVE_PRECHARGE | - DRAM_CTRL_CPU_RESET | - DRAM_CTRL_REFRESH_COMMAND | - DRAM_CTRL_BLOCK_WRITE_TIME | - DRAM_CTRL_BLOCK_WRITE_PRECHARGE | - DRAM_CTRL_ACTIVE_PRECHARGE | - DRAM_CTRL_RESET | - DRAM_CTRL_REMAIN_ACTIVE); - writel(val, (void __iomem *)DRAM_CTRL); - - return 0; -} - -module_init(setup_voyagergx); diff --git a/include/asm-sh/voyagergx.h b/include/asm-sh/voyagergx.h deleted file mode 100644 index 45b4547c74ac..000000000000 --- a/include/asm-sh/voyagergx.h +++ /dev/null @@ -1,341 +0,0 @@ -/* -------------------------------------------------------------------- */ -/* voyagergx.h */ -/* -------------------------------------------------------------------- */ -/* This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Copyright 2003 (c) Lineo uSolutions,Inc. -*/ -/* -------------------------------------------------------------------- */ - -#ifndef _VOYAGER_GX_REG_H -#define _VOYAGER_GX_REG_H - -#define VOYAGER_BASE 0xb3e00000 -#define VOYAGER_USBH_BASE (0x40000 + VOYAGER_BASE) -#define VOYAGER_UART_BASE (0x30000 + VOYAGER_BASE) -#define VOYAGER_AC97_BASE (0xa0000 + VOYAGER_BASE) - -#define VOYAGER_IRQ_NUM 26 -#define VOYAGER_IRQ_BASE 200 - -#define IRQ_SM501_UP (VOYAGER_IRQ_BASE + 0) -#define IRQ_SM501_G54 (VOYAGER_IRQ_BASE + 1) -#define IRQ_SM501_G53 (VOYAGER_IRQ_BASE + 2) -#define IRQ_SM501_G52 (VOYAGER_IRQ_BASE + 3) -#define IRQ_SM501_G51 (VOYAGER_IRQ_BASE + 4) -#define IRQ_SM501_G50 (VOYAGER_IRQ_BASE + 5) -#define IRQ_SM501_G49 (VOYAGER_IRQ_BASE + 6) -#define IRQ_SM501_G48 (VOYAGER_IRQ_BASE + 7) -#define IRQ_SM501_I2C (VOYAGER_IRQ_BASE + 8) -#define IRQ_SM501_PW (VOYAGER_IRQ_BASE + 9) -#define IRQ_SM501_DMA (VOYAGER_IRQ_BASE + 10) -#define IRQ_SM501_PCI (VOYAGER_IRQ_BASE + 11) -#define IRQ_SM501_I2S (VOYAGER_IRQ_BASE + 12) -#define IRQ_SM501_AC (VOYAGER_IRQ_BASE + 13) -#define IRQ_SM501_US (VOYAGER_IRQ_BASE + 14) -#define IRQ_SM501_U1 (VOYAGER_IRQ_BASE + 15) -#define IRQ_SM501_U0 (VOYAGER_IRQ_BASE + 16) -#define IRQ_SM501_CV (VOYAGER_IRQ_BASE + 17) -#define IRQ_SM501_MC (VOYAGER_IRQ_BASE + 18) -#define IRQ_SM501_S1 (VOYAGER_IRQ_BASE + 19) -#define IRQ_SM501_S0 (VOYAGER_IRQ_BASE + 20) -#define IRQ_SM501_UH (VOYAGER_IRQ_BASE + 21) -#define IRQ_SM501_2D (VOYAGER_IRQ_BASE + 22) -#define IRQ_SM501_ZD (VOYAGER_IRQ_BASE + 23) -#define IRQ_SM501_PV (VOYAGER_IRQ_BASE + 24) -#define IRQ_SM501_CI (VOYAGER_IRQ_BASE + 25) - -/* ----- MISC controle register ------------------------------ */ -#define MISC_CTRL (0x000004 + VOYAGER_BASE) -#define MISC_CTRL_USBCLK_48 (3 << 28) -#define MISC_CTRL_USBCLK_96 (2 << 28) -#define MISC_CTRL_USBCLK_CRYSTAL (1 << 28) - -/* ----- GPIO[31:0] register --------------------------------- */ -#define GPIO_MUX_LOW (0x000008 + VOYAGER_BASE) -#define GPIO_MUX_LOW_AC97 0x1F000000 -#define GPIO_MUX_LOW_8051 0x0000ffff -#define GPIO_MUX_LOW_PWM (1 << 29) - -/* ----- GPIO[63:32] register --------------------------------- */ -#define GPIO_MUX_HIGH (0x00000C + VOYAGER_BASE) - -/* ----- DRAM controle register ------------------------------- */ -#define DRAM_CTRL (0x000010 + VOYAGER_BASE) -#define DRAM_CTRL_EMBEDDED (1 << 31) -#define DRAM_CTRL_CPU_BURST_1 (0 << 28) -#define DRAM_CTRL_CPU_BURST_2 (1 << 28) -#define DRAM_CTRL_CPU_BURST_4 (2 << 28) -#define DRAM_CTRL_CPU_BURST_8 (3 << 28) -#define DRAM_CTRL_CPU_CAS_LATENCY (1 << 27) -#define DRAM_CTRL_CPU_SIZE_2 (0 << 24) -#define DRAM_CTRL_CPU_SIZE_4 (1 << 24) -#define DRAM_CTRL_CPU_SIZE_64 (4 << 24) -#define DRAM_CTRL_CPU_SIZE_32 (5 << 24) -#define DRAM_CTRL_CPU_SIZE_16 (6 << 24) -#define DRAM_CTRL_CPU_SIZE_8 (7 << 24) -#define DRAM_CTRL_CPU_COLUMN_SIZE_1024 (0 << 22) -#define DRAM_CTRL_CPU_COLUMN_SIZE_512 (2 << 22) -#define DRAM_CTRL_CPU_COLUMN_SIZE_256 (3 << 22) -#define DRAM_CTRL_CPU_ACTIVE_PRECHARGE (1 << 21) -#define DRAM_CTRL_CPU_RESET (1 << 20) -#define DRAM_CTRL_CPU_BANKS (1 << 19) -#define DRAM_CTRL_CPU_WRITE_PRECHARGE (1 << 18) -#define DRAM_CTRL_BLOCK_WRITE (1 << 17) -#define DRAM_CTRL_REFRESH_COMMAND (1 << 16) -#define DRAM_CTRL_SIZE_4 (0 << 13) -#define DRAM_CTRL_SIZE_8 (1 << 13) -#define DRAM_CTRL_SIZE_16 (2 << 13) -#define DRAM_CTRL_SIZE_32 (3 << 13) -#define DRAM_CTRL_SIZE_64 (4 << 13) -#define DRAM_CTRL_SIZE_2 (5 << 13) -#define DRAM_CTRL_COLUMN_SIZE_256 (0 << 11) -#define DRAM_CTRL_COLUMN_SIZE_512 (2 << 11) -#define DRAM_CTRL_COLUMN_SIZE_1024 (3 << 11) -#define DRAM_CTRL_BLOCK_WRITE_TIME (1 << 10) -#define DRAM_CTRL_BLOCK_WRITE_PRECHARGE (1 << 9) -#define DRAM_CTRL_ACTIVE_PRECHARGE (1 << 8) -#define DRAM_CTRL_RESET (1 << 7) -#define DRAM_CTRL_REMAIN_ACTIVE (1 << 6) -#define DRAM_CTRL_BANKS (1 << 1) -#define DRAM_CTRL_WRITE_PRECHARGE (1 << 0) - -/* ----- Arvitration control register -------------------------- */ -#define ARBITRATION_CTRL (0x000014 + VOYAGER_BASE) -#define ARBITRATION_CTRL_CPUMEM (1 << 29) -#define ARBITRATION_CTRL_INTMEM (1 << 28) -#define ARBITRATION_CTRL_USB_OFF (0 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_1 (1 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_2 (2 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_3 (3 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_4 (4 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_5 (5 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_6 (6 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_7 (7 << 24) -#define ARBITRATION_CTRL_PANEL_OFF (0 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_1 (1 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_2 (2 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_3 (3 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_4 (4 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_5 (5 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_6 (6 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_7 (7 << 20) -#define ARBITRATION_CTRL_ZVPORT_OFF (0 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_1 (1 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_2 (2 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_3 (3 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_4 (4 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_5 (5 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_6 (6 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_7 (7 << 16) -#define ARBITRATION_CTRL_CMD_INTPR_OFF (0 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_1 (1 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_2 (2 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_3 (3 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_4 (4 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_5 (5 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_6 (6 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_7 (7 << 12) -#define ARBITRATION_CTRL_DMA_OFF (0 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_1 (1 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_2 (2 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_3 (3 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_4 (4 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_5 (5 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_6 (6 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_7 (7 << 8) -#define ARBITRATION_CTRL_VIDEO_OFF (0 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_1 (1 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_2 (2 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_3 (3 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_4 (4 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_5 (5 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_6 (6 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_7 (7 << 4) -#define ARBITRATION_CTRL_CRT_OFF (0 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_1 (1 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_2 (2 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_3 (3 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_4 (4 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_5 (5 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_6 (6 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_7 (7 << 0) - -/* ----- Command list status register -------------------------- */ -#define CMD_INTPR_STATUS (0x000024 + VOYAGER_BASE) - -/* ----- Interrupt status register ----------------------------- */ -#define INT_STATUS (0x00002c + VOYAGER_BASE) -#define INT_STATUS_UH (1 << 6) -#define INT_STATUS_MC (1 << 10) -#define INT_STATUS_U0 (1 << 12) -#define INT_STATUS_U1 (1 << 13) -#define INT_STATUS_AC (1 << 17) - -/* ----- Interrupt mask register ------------------------------ */ -#define VOYAGER_INT_MASK (0x000030 + VOYAGER_BASE) -#define VOYAGER_INT_MASK_AC (1 << 17) - -/* ----- Current Gate register ---------------------------------*/ -#define CURRENT_GATE (0x000038 + VOYAGER_BASE) - -/* ----- Power mode 0 gate register --------------------------- */ -#define POWER_MODE0_GATE (0x000040 + VOYAGER_BASE) -#define POWER_MODE0_GATE_G (1 << 6) -#define POWER_MODE0_GATE_U0 (1 << 7) -#define POWER_MODE0_GATE_U1 (1 << 8) -#define POWER_MODE0_GATE_UH (1 << 11) -#define POWER_MODE0_GATE_AC (1 << 18) - -/* ----- Power mode 1 gate register --------------------------- */ -#define POWER_MODE1_GATE (0x000048 + VOYAGER_BASE) -#define POWER_MODE1_GATE_G (1 << 6) -#define POWER_MODE1_GATE_U0 (1 << 7) -#define POWER_MODE1_GATE_U1 (1 << 8) -#define POWER_MODE1_GATE_UH (1 << 11) -#define POWER_MODE1_GATE_AC (1 << 18) - -/* ----- Power mode 0 clock register -------------------------- */ -#define POWER_MODE0_CLOCK (0x000044 + VOYAGER_BASE) - -/* ----- Power mode 1 clock register -------------------------- */ -#define POWER_MODE1_CLOCK (0x00004C + VOYAGER_BASE) - -/* ----- Power mode control register ------------------------- */ -#define POWER_MODE_CTRL (0x000054 + VOYAGER_BASE) - -/* ----- Miscellaneous Timing register ------------------------ */ -#define SYSTEM_DRAM_CTRL (0x000068 + VOYAGER_BASE) - -/* ----- PWM register ------------------------------------------*/ -#define PWM_0 (0x010020 + VOYAGER_BASE) -#define PWM_0_HC(x) (((x)&0x0fff)<<20) -#define PWM_0_LC(x) (((x)&0x0fff)<<8 ) -#define PWM_0_CLK_DEV(x) (((x)&0x000f)<<4 ) -#define PWM_0_EN (1<<0) - -/* ----- I2C register ----------------------------------------- */ -#define I2C_BYTECOUNT (0x010040 + VOYAGER_BASE) -#define I2C_CONTROL (0x010041 + VOYAGER_BASE) -#define I2C_STATUS (0x010042 + VOYAGER_BASE) -#define I2C_RESET (0x010042 + VOYAGER_BASE) -#define I2C_SADDRESS (0x010043 + VOYAGER_BASE) -#define I2C_DATA (0x010044 + VOYAGER_BASE) - -/* ----- Controle register bits ----------------------------------------- */ -#define I2C_CONTROL_E (1 << 0) -#define I2C_CONTROL_MODE (1 << 1) -#define I2C_CONTROL_STATUS (1 << 2) -#define I2C_CONTROL_INT (1 << 4) -#define I2C_CONTROL_INTACK (1 << 5) -#define I2C_CONTROL_REPEAT (1 << 6) - -/* ----- Status register bits ----------------------------------------- */ -#define I2C_STATUS_BUSY (1 << 0) -#define I2C_STATUS_ACK (1 << 1) -#define I2C_STATUS_ERROR (1 << 2) -#define I2C_STATUS_COMPLETE (1 << 3) - -/* ----- Reset register ---------------------------------------------- */ -#define I2C_RESET_ERROR (1 << 2) - -/* ----- transmission frequencies ------------------------------------- */ -#define I2C_SADDRESS_SELECT (1 << 0) - -/* ----- Display Controll register ----------------------------------------- */ -#define PANEL_DISPLAY_CTRL (0x080000 + VOYAGER_BASE) -#define PANEL_DISPLAY_CTRL_BIAS (1<<26) -#define PANEL_PAN_CTRL (0x080004 + VOYAGER_BASE) -#define PANEL_COLOR_KEY (0x080008 + VOYAGER_BASE) -#define PANEL_FB_ADDRESS (0x08000C + VOYAGER_BASE) -#define PANEL_FB_WIDTH (0x080010 + VOYAGER_BASE) -#define PANEL_WINDOW_WIDTH (0x080014 + VOYAGER_BASE) -#define PANEL_WINDOW_HEIGHT (0x080018 + VOYAGER_BASE) -#define PANEL_PLANE_TL (0x08001C + VOYAGER_BASE) -#define PANEL_PLANE_BR (0x080020 + VOYAGER_BASE) -#define PANEL_HORIZONTAL_TOTAL (0x080024 + VOYAGER_BASE) -#define PANEL_HORIZONTAL_SYNC (0x080028 + VOYAGER_BASE) -#define PANEL_VERTICAL_TOTAL (0x08002C + VOYAGER_BASE) -#define PANEL_VERTICAL_SYNC (0x080030 + VOYAGER_BASE) -#define PANEL_CURRENT_LINE (0x080034 + VOYAGER_BASE) -#define VIDEO_DISPLAY_CTRL (0x080040 + VOYAGER_BASE) -#define VIDEO_FB_0_ADDRESS (0x080044 + VOYAGER_BASE) -#define VIDEO_FB_WIDTH (0x080048 + VOYAGER_BASE) -#define VIDEO_FB_0_LAST_ADDRESS (0x08004C + VOYAGER_BASE) -#define VIDEO_PLANE_TL (0x080050 + VOYAGER_BASE) -#define VIDEO_PLANE_BR (0x080054 + VOYAGER_BASE) -#define VIDEO_SCALE (0x080058 + VOYAGER_BASE) -#define VIDEO_INITIAL_SCALE (0x08005C + VOYAGER_BASE) -#define VIDEO_YUV_CONSTANTS (0x080060 + VOYAGER_BASE) -#define VIDEO_FB_1_ADDRESS (0x080064 + VOYAGER_BASE) -#define VIDEO_FB_1_LAST_ADDRESS (0x080068 + VOYAGER_BASE) -#define VIDEO_ALPHA_DISPLAY_CTRL (0x080080 + VOYAGER_BASE) -#define VIDEO_ALPHA_FB_ADDRESS (0x080084 + VOYAGER_BASE) -#define VIDEO_ALPHA_FB_WIDTH (0x080088 + VOYAGER_BASE) -#define VIDEO_ALPHA_FB_LAST_ADDRESS (0x08008C + VOYAGER_BASE) -#define VIDEO_ALPHA_PLANE_TL (0x080090 + VOYAGER_BASE) -#define VIDEO_ALPHA_PLANE_BR (0x080094 + VOYAGER_BASE) -#define VIDEO_ALPHA_SCALE (0x080098 + VOYAGER_BASE) -#define VIDEO_ALPHA_INITIAL_SCALE (0x08009C + VOYAGER_BASE) -#define VIDEO_ALPHA_CHROMA_KEY (0x0800A0 + VOYAGER_BASE) -#define PANEL_HWC_ADDRESS (0x0800F0 + VOYAGER_BASE) -#define PANEL_HWC_LOCATION (0x0800F4 + VOYAGER_BASE) -#define PANEL_HWC_COLOR_12 (0x0800F8 + VOYAGER_BASE) -#define PANEL_HWC_COLOR_3 (0x0800FC + VOYAGER_BASE) -#define ALPHA_DISPLAY_CTRL (0x080100 + VOYAGER_BASE) -#define ALPHA_FB_ADDRESS (0x080104 + VOYAGER_BASE) -#define ALPHA_FB_WIDTH (0x080108 + VOYAGER_BASE) -#define ALPHA_PLANE_TL (0x08010C + VOYAGER_BASE) -#define ALPHA_PLANE_BR (0x080110 + VOYAGER_BASE) -#define ALPHA_CHROMA_KEY (0x080114 + VOYAGER_BASE) -#define CRT_DISPLAY_CTRL (0x080200 + VOYAGER_BASE) -#define CRT_FB_ADDRESS (0x080204 + VOYAGER_BASE) -#define CRT_FB_WIDTH (0x080208 + VOYAGER_BASE) -#define CRT_HORIZONTAL_TOTAL (0x08020C + VOYAGER_BASE) -#define CRT_HORIZONTAL_SYNC (0x080210 + VOYAGER_BASE) -#define CRT_VERTICAL_TOTAL (0x080214 + VOYAGER_BASE) -#define CRT_VERTICAL_SYNC (0x080218 + VOYAGER_BASE) -#define CRT_SIGNATURE_ANALYZER (0x08021C + VOYAGER_BASE) -#define CRT_CURRENT_LINE (0x080220 + VOYAGER_BASE) -#define CRT_MONITOR_DETECT (0x080224 + VOYAGER_BASE) -#define CRT_HWC_ADDRESS (0x080230 + VOYAGER_BASE) -#define CRT_HWC_LOCATION (0x080234 + VOYAGER_BASE) -#define CRT_HWC_COLOR_12 (0x080238 + VOYAGER_BASE) -#define CRT_HWC_COLOR_3 (0x08023C + VOYAGER_BASE) -#define CRT_PALETTE_RAM (0x080400 + VOYAGER_BASE) -#define PANEL_PALETTE_RAM (0x080800 + VOYAGER_BASE) -#define VIDEO_PALETTE_RAM (0x080C00 + VOYAGER_BASE) - -/* ----- 8051 Controle register ----------------------------------------- */ -#define VOYAGER_8051_BASE (0x000c0000 + VOYAGER_BASE) -#define VOYAGER_8051_RESET (0x000b0000 + VOYAGER_BASE) -#define VOYAGER_8051_SELECT (0x000b0004 + VOYAGER_BASE) -#define VOYAGER_8051_CPU_INT (0x000b000c + VOYAGER_BASE) - -/* ----- AC97 Controle register ----------------------------------------- */ -#define AC97_TX_SLOT0 (0x00000000 + VOYAGER_AC97_BASE) -#define AC97_CONTROL_STATUS (0x00000080 + VOYAGER_AC97_BASE) -#define AC97C_READ (1 << 19) -#define AC97C_WD_BIT (1 << 2) -#define AC97C_INDEX_MASK 0x7f - -/* arch/sh/cchips/voyagergx/consistent.c */ -void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); -int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); - -/* arch/sh/cchips/voyagergx/irq.c */ -void setup_voyagergx_irq(void); - -#endif /* _VOYAGER_GX_REG_H */ |
