summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-omap2/omap-wakeupgen.c131
-rw-r--r--arch/arm/mach-omap2/omap4-sar-layout.h15
2 files changed, 146 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 701dfecad64b..d3d8971d7f30 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -22,10 +22,16 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/cpu.h>
+#include <linux/notifier.h>
+#include <linux/cpu_pm.h>
#include <asm/hardware/gic.h>
#include <mach/omap-wakeupgen.h>
+#include <mach/omap-secure.h>
+
+#include "omap4-sar-layout.h"
+#include "common.h"
#define NR_REG_BANKS 4
#define MAX_IRQS 128
@@ -36,6 +42,7 @@
#define CPU1_ID 0x1
static void __iomem *wakeupgen_base;
+static void __iomem *sar_base;
static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks);
static DEFINE_SPINLOCK(wakeupgen_lock);
static unsigned int irq_target_cpu[NR_IRQS];
@@ -55,6 +62,11 @@ static inline void wakeupgen_writel(u32 val, u8 idx, u32 cpu)
(cpu * CPU_ENA_OFFSET) + (idx * 4));
}
+static inline void sar_writel(u32 val, u32 offset, u8 idx)
+{
+ __raw_writel(val, sar_base + offset + (idx * 4));
+}
+
static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg)
{
u8 i;
@@ -180,6 +192,93 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set)
spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
+#ifdef CONFIG_CPU_PM
+/*
+ * Save WakeupGen interrupt context in SAR BANK3. Restore is done by
+ * ROM code. WakeupGen IP is integrated along with GIC to manage the
+ * interrupt wakeups from CPU low power states. It manages
+ * masking/unmasking of Shared peripheral interrupts(SPI). So the
+ * interrupt enable/disable control should be in sync and consistent
+ * at WakeupGen and GIC so that interrupts are not lost.
+ */
+static void irq_save_context(void)
+{
+ u32 i, val;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0)
+ return;
+
+ if (!sar_base)
+ sar_base = omap4_get_sar_ram_base();
+
+ for (i = 0; i < NR_REG_BANKS; i++) {
+ /* Save the CPUx interrupt mask for IRQ 0 to 127 */
+ val = wakeupgen_readl(i, 0);
+ sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i);
+ val = wakeupgen_readl(i, 1);
+ sar_writel(val, WAKEUPGENENB_OFFSET_CPU1, i);
+
+ /*
+ * Disable the secure interrupts for CPUx. The restore
+ * code blindly restores secure and non-secure interrupt
+ * masks from SAR RAM. Secure interrupts are not suppose
+ * to be enabled from HLOS. So overwrite the SAR location
+ * so that the secure interrupt remains disabled.
+ */
+ sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
+ sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
+ }
+
+ /* Save AuxBoot* registers */
+ val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+ __raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
+ val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+ __raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
+
+ /* Save SyncReq generation logic */
+ val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+ __raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
+ val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+ __raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
+
+ /* Save SyncReq generation logic */
+ val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_MASK);
+ __raw_writel(val, sar_base + PTMSYNCREQ_MASK_OFFSET);
+ val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_EN);
+ __raw_writel(val, sar_base + PTMSYNCREQ_EN_OFFSET);
+
+ /* Set the Backup Bit Mask status */
+ val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
+ val |= SAR_BACKUP_STATUS_WAKEUPGEN;
+ __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+}
+
+/*
+ * Clear WakeupGen SAR backup status.
+ */
+void irq_sar_clear(void)
+{
+ u32 val;
+ val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
+ val &= ~SAR_BACKUP_STATUS_WAKEUPGEN;
+ __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+}
+
+/*
+ * Save GIC and Wakeupgen interrupt context using secure API
+ * for HS/EMU devices.
+ */
+static void irq_save_secure_context(void)
+{
+ u32 ret;
+ ret = omap_secure_dispatcher(OMAP4_HAL_SAVEGIC_INDEX,
+ FLAG_START_CRITICAL,
+ 0, 0, 0, 0, 0);
+ if (ret != API_HAL_RET_VALUE_OK)
+ pr_err("GIC and Wakeupgen context save failed\n");
+}
+#endif
+
#ifdef CONFIG_HOTPLUG_CPU
static int __cpuinit irq_cpu_hotplug_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
@@ -210,6 +309,37 @@ static void __init irq_hotplug_init(void)
{}
#endif
+#ifdef CONFIG_CPU_PM
+static int irq_notifier(struct notifier_block *self, unsigned long cmd, void *v)
+{
+ switch (cmd) {
+ case CPU_CLUSTER_PM_ENTER:
+ if (omap_type() == OMAP2_DEVICE_TYPE_GP)
+ irq_save_context();
+ else
+ irq_save_secure_context();
+ break;
+ case CPU_CLUSTER_PM_EXIT:
+ if (omap_type() == OMAP2_DEVICE_TYPE_GP)
+ irq_sar_clear();
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block irq_notifier_block = {
+ .notifier_call = irq_notifier,
+};
+
+static void __init irq_pm_init(void)
+{
+ cpu_pm_register_notifier(&irq_notifier_block);
+}
+#else
+static void __init irq_pm_init(void)
+{}
+#endif
+
/*
* Initialise the wakeupgen module.
*/
@@ -253,6 +383,7 @@ int __init omap_wakeupgen_init(void)
irq_target_cpu[i] = boot_cpu;
irq_hotplug_init();
+ irq_pm_init();
return 0;
}
diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h
index 970a2eef3ab9..aa14a8dd2505 100644
--- a/arch/arm/mach-omap2/omap4-sar-layout.h
+++ b/arch/arm/mach-omap2/omap4-sar-layout.h
@@ -28,4 +28,19 @@
#define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04
#define CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xa08
+#define SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x500)
+#define SAR_SECURE_RAM_SIZE_OFFSET (SAR_BANK3_OFFSET + 0x504)
+#define SAR_SECRAM_SAVED_AT_OFFSET (SAR_BANK3_OFFSET + 0x508)
+
+/* WakeUpGen save restore offset from OMAP44XX_SAR_RAM_BASE */
+#define WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x684)
+#define WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x694)
+#define WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x6a4)
+#define WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x6b4)
+#define AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x6c4)
+#define AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x6c8)
+#define PTMSYNCREQ_MASK_OFFSET (SAR_BANK3_OFFSET + 0x6cc)
+#define PTMSYNCREQ_EN_OFFSET (SAR_BANK3_OFFSET + 0x6d0)
+#define SAR_BACKUP_STATUS_WAKEUPGEN 0x10
+
#endif
OpenPOWER on IntegriCloud