diff options
26 files changed, 390 insertions, 169 deletions
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index 09a8743143f3..d3e5e9bc8f94 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -55,6 +55,8 @@ struct device_node; #define EEH_PE_RECOVERING (1 << 1) /* Recovering PE */ #define EEH_PE_PHB_DEAD (1 << 2) /* Dead PHB */ +#define EEH_PE_KEEP (1 << 8) /* Keep PE on hotplug */ + struct eeh_pe { int type; /* PE type: PHB/Bus/Device */ int state; /* PE EEH dependent mode */ @@ -72,8 +74,8 @@ struct eeh_pe { struct list_head child; /* Child PEs */ }; -#define eeh_pe_for_each_dev(pe, edev) \ - list_for_each_entry(edev, &pe->edevs, list) +#define eeh_pe_for_each_dev(pe, edev, tmp) \ + list_for_each_entry_safe(edev, tmp, &pe->edevs, list) /* * The struct is used to trace EEH state for the associated @@ -82,7 +84,13 @@ struct eeh_pe { * another tree except the currently existing tree of PCI * buses and PCI devices */ -#define EEH_DEV_IRQ_DISABLED (1<<0) /* Interrupt disabled */ +#define EEH_DEV_BRIDGE (1 << 0) /* PCI bridge */ +#define EEH_DEV_ROOT_PORT (1 << 1) /* PCIe root port */ +#define EEH_DEV_DS_PORT (1 << 2) /* Downstream port */ +#define EEH_DEV_IRQ_DISABLED (1 << 3) /* Interrupt disabled */ +#define EEH_DEV_DISCONNECTED (1 << 4) /* Removing from PE */ + +#define EEH_DEV_SYSFS (1 << 8) /* Sysfs created */ struct eeh_dev { int mode; /* EEH mode */ @@ -90,11 +98,13 @@ struct eeh_dev { int config_addr; /* Config address */ int pe_config_addr; /* PE config address */ u32 config_space[16]; /* Saved PCI config space */ + u8 pcie_cap; /* Saved PCIe capability */ struct eeh_pe *pe; /* Associated PE */ struct list_head list; /* Form link list in the PE */ struct pci_controller *phb; /* Associated PHB */ struct device_node *dn; /* Associated device node */ struct pci_dev *pdev; /* Associated PCI device */ + struct pci_bus *bus; /* PCI bus for partial hotplug */ }; static inline struct device_node *eeh_dev_to_of_node(struct eeh_dev *edev) @@ -193,8 +203,10 @@ int eeh_phb_pe_create(struct pci_controller *phb); struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb); struct eeh_pe *eeh_pe_get(struct eeh_dev *edev); int eeh_add_to_parent_pe(struct eeh_dev *edev); -int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe); +int eeh_rmv_from_parent_pe(struct eeh_dev *edev); void eeh_pe_update_time_stamp(struct eeh_pe *pe); +void *eeh_pe_traverse(struct eeh_pe *root, + eeh_traverse_func fn, void *flag); void *eeh_pe_dev_traverse(struct eeh_pe *root, eeh_traverse_func fn, void *flag); void eeh_pe_restore_bars(struct eeh_pe *pe); @@ -209,10 +221,12 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val); int eeh_dev_check_failure(struct eeh_dev *edev); void eeh_addr_cache_build(void); +void eeh_add_device_early(struct device_node *); void eeh_add_device_tree_early(struct device_node *); +void eeh_add_device_late(struct pci_dev *); void eeh_add_device_tree_late(struct pci_bus *); void eeh_add_sysfs_files(struct pci_bus *); -void eeh_remove_bus_device(struct pci_dev *, int); +void eeh_remove_device(struct pci_dev *); /** * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure. @@ -252,13 +266,17 @@ static inline unsigned long eeh_check_failure(const volatile void __iomem *token static inline void eeh_addr_cache_build(void) { } +static inline void eeh_add_device_early(struct device_node *dn) { } + static inline void eeh_add_device_tree_early(struct device_node *dn) { } +static inline void eeh_add_device_late(struct pci_dev *dev) { } + static inline void eeh_add_device_tree_late(struct pci_bus *bus) { } static inline void eeh_add_sysfs_files(struct pci_bus *bus) { } -static inline void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe) { } +static inline void eeh_remove_device(struct pci_dev *dev) { } #define EEH_POSSIBLE_ERROR(val, type) (0) #define EEH_IO_ERROR_VALUE(size) (-1UL) diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index ba713f166fa5..10be1dd01c6b 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -96,10 +96,11 @@ static inline bool arch_irqs_disabled(void) #endif #define hard_irq_disable() do { \ - u8 _was_enabled = get_paca()->soft_enabled; \ + u8 _was_enabled; \ __hard_irq_disable(); \ - get_paca()->soft_enabled = 0; \ - get_paca()->irq_happened |= PACA_IRQ_HARD_DIS; \ + _was_enabled = local_paca->soft_enabled; \ + local_paca->soft_enabled = 0; \ + local_paca->irq_happened |= PACA_IRQ_HARD_DIS; \ if (_was_enabled) \ trace_hardirqs_off(); \ } while(0) diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h index c1df590ec444..49fa55bfbac4 100644 --- a/arch/powerpc/include/asm/module.h +++ b/arch/powerpc/include/asm/module.h @@ -82,10 +82,9 @@ struct exception_table_entry; void sort_ex_table(struct exception_table_entry *start, struct exception_table_entry *finish); -#ifdef CONFIG_MODVERSIONS +#if defined(CONFIG_MODVERSIONS) && defined(CONFIG_PPC64) #define ARCH_RELOCATES_KCRCTAB - -extern const unsigned long reloc_start[]; +#define reloc_start PHYSICAL_START #endif #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_MODULE_H */ diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 2c1d8cb9b265..32d0d2018faf 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -209,7 +209,6 @@ static inline struct eeh_dev *of_node_to_eeh_dev(struct device_node *dn) extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn); /** Remove all of the PCI devices under this bus */ -extern void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe); extern void pcibios_remove_pci_devices(struct pci_bus *bus); /** Discover new pci devices under this bus, and add them */ diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 5d7d9c2a5473..a6840e4e24f7 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1088,7 +1088,8 @@ #define PVR_970MP 0x0044 #define PVR_970GX 0x0045 #define PVR_POWER7p 0x004A -#define PVR_POWER8 0x004B +#define PVR_POWER8E 0x004B +#define PVR_POWER8 0x004D #define PVR_BE 0x0070 #define PVR_PA6T 0x0090 diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 2a45d0f04385..22973a74df73 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -494,9 +494,27 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_restore = __restore_cpu_power7, .platform = "power7+", }, - { /* Power8 */ + { /* Power8E */ .pvr_mask = 0xffff0000, .pvr_value = 0x004b0000, + .cpu_name = "POWER8E (raw)", + .cpu_features = CPU_FTRS_POWER8, + .cpu_user_features = COMMON_USER_POWER8, + .cpu_user_features2 = COMMON_USER2_POWER8, + .mmu_features = MMU_FTRS_POWER8, + .icache_bsize = 128, + .dcache_bsize = 128, + .num_pmcs = 6, + .pmc_type = PPC_PMC_IBM, + .oprofile_cpu_type = "ppc64/power8", + .oprofile_type = PPC_OPROFILE_INVALID, + .cpu_setup = __setup_cpu_power8, + .cpu_restore = __restore_cpu_power8, + .platform = "power8", + }, + { /* Power8 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x004d0000, .cpu_name = "POWER8 (raw)", .cpu_features = CPU_FTRS_POWER8, .cpu_user_features = COMMON_USER_POWER8, diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 39954fe941b8..ea9414c8088d 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -231,7 +231,7 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len) void eeh_slot_error_detail(struct eeh_pe *pe, int severity) { size_t loglen = 0; - struct eeh_dev *edev; + struct eeh_dev *edev, *tmp; bool valid_cfg_log = true; /* @@ -251,7 +251,7 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity) eeh_pe_restore_bars(pe); pci_regs_buf[0] = 0; - eeh_pe_for_each_dev(pe, edev) { + eeh_pe_for_each_dev(pe, edev, tmp) { loglen += eeh_gather_pci_data(edev, pci_regs_buf + loglen, EEH_PCI_REGS_LOG_LEN - loglen); } @@ -499,8 +499,6 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon } eeh_dev_check_failure(edev); - - pci_dev_put(eeh_dev_to_pci_dev(edev)); return val; } @@ -838,7 +836,7 @@ core_initcall_sync(eeh_init); * on the CEC architecture, type of the device, on earlier boot * command-line arguments & etc. */ -static void eeh_add_device_early(struct device_node *dn) +void eeh_add_device_early(struct device_node *dn) { struct pci_controller *phb; @@ -886,7 +884,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_early); * This routine must be used to complete EEH initialization for PCI * devices that were added after system boot (e.g. hotplug, dlpar). */ -static void eeh_add_device_late(struct pci_dev *dev) +void eeh_add_device_late(struct pci_dev *dev) { struct device_node *dn; struct eeh_dev *edev; @@ -902,9 +900,23 @@ static void eeh_add_device_late(struct pci_dev *dev) pr_debug("EEH: Already referenced !\n"); return; } - WARN_ON(edev->pdev); - pci_dev_get(dev); + /* + * The EEH cache might not be removed correctly because of + * unbalanced kref to the device during unplug time, which + * relies on pcibios_release_device(). So we have to remove + * that here explicitly. + */ + if (edev->pdev) { + eeh_rmv_from_parent_pe(edev); + eeh_addr_cache_rmv_dev(edev->pdev); + eeh_sysfs_remove_device(edev->pdev); + edev->mode &= ~EEH_DEV_SYSFS; + + edev->pdev = NULL; + dev->dev.archdata.edev = NULL; + } + edev->pdev = dev; dev->dev.archdata.edev = edev; @@ -967,7 +979,6 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files); /** * eeh_remove_device - Undo EEH setup for the indicated pci device * @dev: pci device to be removed - * @purge_pe: remove the PE or not * * This routine should be called when a device is removed from * a running system (e.g. by hotplug or dlpar). It unregisters @@ -975,7 +986,7 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files); * this device will no longer be detected after this call; thus, * i/o errors affecting this slot may leave this device unusable. */ -static void eeh_remove_device(struct pci_dev *dev, int purge_pe) +void eeh_remove_device(struct pci_dev *dev) { struct eeh_dev *edev; @@ -986,42 +997,29 @@ static void eeh_remove_device(struct pci_dev *dev, int purge_pe) /* Unregister the device with the EEH/PCI address search system */ pr_debug("EEH: Removing device %s\n", pci_name(dev)); - if (!edev || !edev->pdev) { + if (!edev || !edev->pdev || !edev->pe) { pr_debug("EEH: Not referenced !\n"); return; } + + /* + * During the hotplug for EEH error recovery, we need the EEH + * device attached to the parent PE in order for BAR restore + * a bit later. So we keep it for BAR restore and remove it + * from the parent PE during the BAR resotre. + */ edev->pdev = NULL; dev->dev.archdata.edev = NULL; - pci_dev_put(dev); + if (!(edev->pe->state & EEH_PE_KEEP)) + eeh_rmv_from_parent_pe(edev); + else + edev->mode |= EEH_DEV_DISCONNECTED; - eeh_rmv_from_parent_pe(edev, purge_pe); eeh_addr_cache_rmv_dev(dev); eeh_sysfs_remove_device(dev); + edev->mode &= ~EEH_DEV_SYSFS; } -/** - * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device - * @dev: PCI device - * @purge_pe: remove the corresponding PE or not - * - * This routine must be called when a device is removed from the - * running system through hotplug or dlpar. The corresponding - * PCI address cache will be removed. - */ -void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe) -{ - struct pci_bus *bus = dev->subordinate; - struct pci_dev *child, *tmp; - - eeh_remove_device(dev, purge_pe); - - if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { - list_for_each_entry_safe(child, tmp, &bus->devices, bus_list) - eeh_remove_bus_device(child, purge_pe); - } -} -EXPORT_SYMBOL_GPL(eeh_remove_bus_device); - static int proc_eeh_show(struct seq_file *m, void *v) { if (0 == eeh_subsystem_enabled) { diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c index f9ac1232a746..e8c9fd546a5c 100644 --- a/arch/powerpc/kernel/eeh_cache.c +++ b/arch/powerpc/kernel/eeh_cache.c @@ -68,16 +68,12 @@ static inline struct eeh_dev *__eeh_addr_cache_get_device(unsigned long addr) struct pci_io_addr_range *piar; piar = rb_entry(n, struct pci_io_addr_range, rb_node); - if (addr < piar->addr_lo) { + if (addr < piar->addr_lo) n = n->rb_left; - } else { - if (addr > piar->addr_hi) { - n = n->rb_right; - } else { - pci_dev_get(piar->pcidev); - return piar->edev; - } - } + else if (addr > piar->addr_hi) + n = n->rb_right; + else + return piar->edev; } return NULL; @@ -156,7 +152,6 @@ eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo, if (!piar) return NULL; - pci_dev_get(dev); piar->addr_lo = alo; piar->addr_hi = ahi; piar->edev = pci_dev_to_eeh_dev(dev); @@ -250,7 +245,6 @@ restart: if (piar->pcidev == dev) { rb_erase(n, &pci_io_addr_cache_root.rb_root); - pci_dev_put(piar->pcidev); kfree(piar); goto restart; } @@ -302,12 +296,10 @@ void eeh_addr_cache_build(void) if (!edev) continue; - pci_dev_get(dev); /* matching put is in eeh_remove_device() */ dev->dev.archdata.edev = edev; edev->pdev = dev; eeh_addr_cache_insert_dev(dev); - eeh_sysfs_add_device(dev); } diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 2b1ce17cae50..36bed5a12750 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -143,10 +143,14 @@ static void eeh_disable_irq(struct pci_dev *dev) static void eeh_enable_irq(struct pci_dev *dev) { struct eeh_dev *edev = pci_dev_to_eeh_dev(dev); + struct irq_desc *desc; if ((edev->mode) & EEH_DEV_IRQ_DISABLED) { edev->mode &= ~EEH_DEV_IRQ_DISABLED; - enable_irq(dev->irq); + + desc = irq_to_desc(dev->irq); + if (desc && desc->depth > 0) + enable_irq(dev->irq); } } @@ -338,6 +342,54 @@ static void *eeh_report_failure(void *data, void *userdata) return NULL; } +static void *eeh_rmv_device(void *data, void *userdata) +{ + struct pci_driver *driver; + struct eeh_dev *edev = (struct eeh_dev *)data; + struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + int *removed = (int *)userdata; + + /* + * Actually, we should remove the PCI bridges as well. + * However, that's lots of complexity to do that, + * particularly some of devices under the bridge might + * support EEH. So we just care about PCI devices for + * simplicity here. + */ + if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE)) + return NULL; + driver = eeh_pcid_get(dev); + if (driver && driver->err_handler) + return NULL; + + /* Remove it from PCI subsystem */ + pr_debug("EEH: Removing %s without EEH sensitive driver\n", + pci_name(dev)); + edev->bus = dev->bus; + edev->mode |= EEH_DEV_DISCONNECTED; + (*removed)++; + + pci_stop_and_remove_bus_device(dev); + + return NULL; +} + +static void *eeh_pe_detach_dev(void *data, void *userdata) +{ + struct eeh_pe *pe = (struct eeh_pe *)data; + struct eeh_dev *edev, *tmp; + + eeh_pe_for_each_dev(pe, edev, tmp) { + if (!(edev->mode & EEH_DEV_DISCONNECTED)) + continue; + + edev->mode &= ~(EEH_DEV_DISCONNECTED | EEH_DEV_IRQ_DISABLED); + eeh_rmv_from_parent_pe(edev); + } + + return NULL; +} + /** * eeh_reset_device - Perform actual reset of a pci slot * @pe: EEH PE @@ -349,8 +401,9 @@ static void *eeh_report_failure(void *data, void *userdata) */ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) { + struct pci_bus *frozen_bus = eeh_pe_bus_get(pe); struct timeval tstamp; - int cnt, rc; + int cnt, rc, removed = 0; /* pcibios will clear the counter; save the value */ cnt = pe->freeze_count; @@ -362,8 +415,11 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) * devices are expected to be attached soon when calling * into pcibios_add_pci_devices(). */ + eeh_pe_state_mark(pe, EEH_PE_KEEP); if (bus) - __pcibios_remove_pci_devices(bus, 0); + pcibios_remove_pci_devices(bus); + else if (frozen_bus) + eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed); /* Reset the pci controller. (Asserts RST#; resets config space). * Reconfigure bridges and devices. Don't try to bring the system @@ -384,9 +440,24 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) * potentially weird things happen. */ if (bus) { + pr_info("EEH: Sleep 5s ahead of complete hotplug\n"); ssleep(5); + + /* + * The EEH device is still connected with its parent + * PE. We should disconnect it so the binding can be + * rebuilt when adding PCI devices. + */ + eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL); pcibios_add_pci_devices(bus); + } else if (frozen_bus && removed) { + pr_info("EEH: Sleep 5s ahead of partial hotplug\n"); + ssleep(5); + + eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL); + pcibios_add_pci_devices(frozen_bus); } + eeh_pe_state_clear(pe, EEH_PE_KEEP); pe->tstamp = tstamp; pe->freeze_count = cnt; diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c index 016588a6f5ed..f9450537e335 100644 --- a/arch/powerpc/kernel/eeh_pe.c +++ b/arch/powerpc/kernel/eeh_pe.c @@ -149,8 +149,8 @@ static struct eeh_pe *eeh_pe_next(struct eeh_pe *pe, * callback returns something other than NULL, or no more PEs * to be traversed. */ -static void *eeh_pe_traverse(struct eeh_pe *root, - eeh_traverse_func fn, void *flag) +void *eeh_pe_traverse(struct eeh_pe *root, + eeh_traverse_func fn, void *flag) { struct eeh_pe *pe; void *ret; @@ -176,7 +176,7 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root, eeh_traverse_func fn, void *flag) { struct eeh_pe *pe; - struct eeh_dev *edev; + struct eeh_dev *edev, *tmp; void *ret; if (!root) { @@ -186,7 +186,7 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root, /* Traverse root PE */ for (pe = root; pe; pe = eeh_pe_next(pe, root)) { - eeh_pe_for_each_dev(pe, edev) { + eeh_pe_for_each_dev(pe, edev, tmp) { ret = fn(edev, flag); if (ret) return ret; @@ -333,7 +333,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev) while (parent) { if (!(parent->type & EEH_PE_INVALID)) break; - parent->type &= ~EEH_PE_INVALID; + parent->type &= ~(EEH_PE_INVALID | EEH_PE_KEEP); parent = parent->parent; } pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n", @@ -397,21 +397,20 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev) /** * eeh_rmv_from_parent_pe - Remove one EEH device from the associated PE * @edev: EEH device - * @purge_pe: remove PE or not * * The PE hierarchy tree might be changed when doing PCI hotplug. * Also, the PCI devices or buses could be removed from the system * during EEH recovery. So we have to call the function remove the * corresponding PE accordingly if necessary. */ -int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe) +int eeh_rmv_from_parent_pe(struct eeh_dev *edev) { struct eeh_pe *pe, *parent, *child; int cnt; if (!edev->pe) { - pr_warning("%s: No PE found for EEH device %s\n", - __func__, edev->dn->full_name); + pr_debug("%s: No PE found for EEH device %s\n", + __func__, edev->dn->full_name); return -EEXIST; } @@ -431,7 +430,7 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe) if (pe->type & EEH_PE_PHB) break; - if (purge_pe) { + if (!(pe->state & EEH_PE_KEEP)) { if (list_empty(&pe->edevs) && list_empty(&pe->child_list)) { list_del(&pe->child); @@ -502,7 +501,7 @@ static void *__eeh_pe_state_mark(void *data, void *flag) { struct eeh_pe *pe = (struct eeh_pe *)data; int state = *((int *)flag); - struct eeh_dev *tmp; + struct eeh_dev *edev, *tmp; struct pci_dev *pdev; /* @@ -512,8 +511,8 @@ static void *__eeh_pe_state_mark(void *data, void *flag) * the PCI device driver. */ pe->state |= state; - eeh_pe_for_each_dev(pe, tmp) { - pdev = eeh_dev_to_pci_dev(tmp); + eeh_pe_for_each_dev(pe, edev, tmp) { + pdev = eeh_dev_to_pci_dev(edev); if (pdev) pdev->error_state = pci_channel_io_frozen; } @@ -579,7 +578,7 @@ void eeh_pe_state_clear(struct eeh_pe *pe, int state) * blocked on normal path during the stage. So we need utilize * eeh operations, which is always permitted. */ -static void eeh_bridge_check_link(struct pci_dev *pdev, +static void eeh_bridge_check_link(struct eeh_dev *edev, struct device_node *dn) { int cap; @@ -590,16 +589,17 @@ static void eeh_bridge_check_link(struct pci_dev *pdev, * We only check root port and downstream ports of * PCIe switches */ - if (!pci_is_pcie(pdev) || - (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT && - pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM)) + if (!(edev->mode & (EEH_DEV_ROOT_PORT | EEH_DEV_DS_PORT))) return; - pr_debug("%s: Check PCIe link for %s ...\n", - __func__, pci_name(pdev)); + pr_debug("%s: Check PCIe link for %04x:%02x:%02x.%01x ...\n", + __func__, edev->phb->global_number, + edev->config_addr >> 8, + PCI_SLOT(edev->config_addr & 0xFF), + PCI_FUNC(edev->config_addr & 0xFF)); /* Check slot status */ - cap = pdev->pcie_cap; + cap = edev->pcie_cap; eeh_ops->read_config(dn, cap + PCI_EXP_SLTSTA, 2, &val); if (!(val & PCI_EXP_SLTSTA_PDS)) { pr_debug(" No card in the slot (0x%04x) !\n", val); @@ -653,8 +653,7 @@ static void eeh_bridge_check_link(struct pci_dev *pdev, #define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF)) #define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)]) -static void eeh_restore_bridge_bars(struct pci_dev *pdev, - struct eeh_dev *edev, +static void eeh_restore_bridge_bars(struct eeh_dev *edev, struct device_node *dn) { int i; @@ -680,7 +679,7 @@ static void eeh_restore_bridge_bars(struct pci_dev *pdev, eeh_ops->write_config(dn, PCI_COMMAND, 4, edev->config_space[1]); /* Check the PCIe link is ready */ - eeh_bridge_check_link(pdev, dn); + eeh_bridge_check_link(edev, dn); } static void eeh_restore_device_bars(struct eeh_dev *edev, @@ -729,19 +728,12 @@ static void eeh_restore_device_bars(struct eeh_dev *edev, */ static void *eeh_restore_one_device_bars(void *data, void *flag) { - struct pci_dev *pdev = NULL; struct eeh_dev *edev = (struct eeh_dev *)data; struct device_node *dn = eeh_dev_to_of_node(edev); - /* Trace the PCI bridge */ - if (eeh_probe_mode_dev()) { - pdev = eeh_dev_to_pci_dev(edev); - if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) - pdev = NULL; - } - - if (pdev) - eeh_restore_bridge_bars(pdev, edev, dn); + /* Do special restore for bridges */ + if (edev->mode & EEH_DEV_BRIDGE) + eeh_restore_bridge_bars(edev, dn); else eeh_restore_device_bars(edev, dn); diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c index e7ae3484918c..5d753d4f2c75 100644 --- a/arch/powerpc/kernel/eeh_sysfs.c +++ b/arch/powerpc/kernel/eeh_sysfs.c @@ -56,19 +56,40 @@ EEH_SHOW_ATTR(eeh_pe_config_addr, pe_config_addr, "0x%x"); void eeh_sysfs_add_device(struct pci_dev *pdev) { + struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev); int rc=0; + if (edev && (edev->mode & EEH_DEV_SYSFS)) + return; + rc += device_create_file(&pdev->dev, &dev_attr_eeh_mode); rc += device_create_file(&pdev->dev, &dev_attr_eeh_config_addr); rc += device_create_file(&pdev->dev, &dev_attr_eeh_pe_config_addr); if (rc) printk(KERN_WARNING "EEH: Unable to create sysfs entries\n"); + else if (edev) + edev->mode |= EEH_DEV_SYSFS; } void eeh_sysfs_remove_device(struct pci_dev *pdev) { + struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev); + + /* + * The parent directory might have been removed. We needn't + * continue for that case. + */ + if (!pdev->dev.kobj.sd) { + if (edev) + edev->mode &= ~EEH_DEV_SYSFS; + return; + } + device_remove_file(&pdev->dev, &dev_attr_eeh_mode); device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr); device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr); + + if (edev) + edev->mode &= ~EEH_DEV_SYSFS; } diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index f46914a0f33e..7d22a675fe1a 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1462,6 +1462,8 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus) /* Allocate bus and devices resources */ pcibios_allocate_bus_resources(bus); pcibios_claim_one_bus(bus); + if (!pci_has_flag(PCI_PROBE_ONLY)) + pci_assign_unassigned_bus_resources(bus); /* Fixup EEH */ eeh_add_device_tree_late(bus); diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c index 3f608800c06b..c1e17ae68a08 100644 --- a/arch/powerpc/kernel/pci-hotplug.c +++ b/arch/powerpc/kernel/pci-hotplug.c @@ -22,45 +22,40 @@ #include <asm/eeh.h> /** - * __pcibios_remove_pci_devices - remove all devices under this bus + * pcibios_release_device - release PCI device + * @dev: PCI device + * + * The function is called before releasing the indicated PCI device. + */ +void pcibios_release_device(struct pci_dev *dev) +{ + eeh_remove_device(dev); +} + +/** + * pcibios_remove_pci_devices - remove all devices under this bus * @bus: the indicated PCI bus - * @purge_pe: destroy the PE on removal of PCI devices * * Remove all of the PCI devices under this bus both from the * linux pci device tree, and from the powerpc EEH address cache. - * By default, the corresponding PE will be destroied during the - * normal PCI hotplug path. For PCI hotplug during EEH recovery, - * the corresponding PE won't be destroied and deallocated. */ -void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe) +void pcibios_remove_pci_devices(struct pci_bus *bus) { struct pci_dev *dev, *tmp; struct pci_bus *child_bus; /* First go down child busses */ list_for_each_entry(child_bus, &bus->children, node) - __pcibios_remove_pci_devices(child_bus, purge_pe); + pcibios_remove_pci_devices(child_bus); pr_debug("PCI: Removing devices on bus %04x:%02x\n", pci_domain_nr(bus), bus->number); list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) { - pr_debug(" * Removing %s...\n", pci_name(dev)); - eeh_remove_bus_device(dev, purge_pe); + pr_debug(" Removing %s...\n", pci_name(dev)); pci_stop_and_remove_bus_device(dev); } } -/** - * pcibios_remove_pci_devices - remove all devices under this bus - * @bus: the indicated PCI bus - * - * Remove all of the PCI devices under this bus both from the - * linux pci device tree, and from the powerpc EEH address cache. - */ -void pcibios_remove_pci_devices(struct pci_bus *bus) -{ - __pcibios_remove_pci_devices(bus, 1); -} EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices); /** @@ -76,7 +71,7 @@ EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices); */ void pcibios_add_pci_devices(struct pci_bus * bus) { - int slotno, num, mode, pass, max; + int slotno, mode, pass, max; struct pci_dev *dev; struct device_node *dn = pci_bus_to_OF_node(bus); @@ -90,11 +85,15 @@ void pcibios_add_pci_devices(struct pci_bus * bus) /* use ofdt-based probe */ of_rescan_bus(dn, bus); } else if (mode == PCI_PROBE_NORMAL) { - /* use legacy probe */ + /* + * Use legacy probe. In the partial hotplug case, we + * probably have grandchildren devices unplugged. So + * we don't check the return value from pci_scan_slot() in + * order for fully rescan all the way down to pick them up. + * They can have been removed during partial hotplug. + */ slotno = PCI_SLOT(PCI_DN(dn->child)->devfn); - num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0)); - if (!num) - return; + pci_scan_slot(bus, PCI_DEVFN(slotno, 0)); pcibios_setup_bus_devices(bus); max = bus->busn_res.start; for (pass = 0; pass < 2; pass++) { diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index 6b0ba5854d99..15d9105323bf 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -230,11 +230,14 @@ void of_scan_pci_bridge(struct pci_dev *dev) return; } - bus = pci_add_new_bus(dev->bus, dev, busrange[0]); + bus = pci_find_bus(pci_domain_nr(dev->bus), busrange[0]); if (!bus) { - printk(KERN_ERR "Failed to create pci bus for %s\n", - node->full_name); - return; + bus = pci_add_new_bus(dev->bus, dev, busrange[0]); + if (!bus) { + printk(KERN_ERR "Failed to create pci bus for %s\n", + node->full_name); + return; + } } bus->primary = dev->bus->number; @@ -292,6 +295,38 @@ void of_scan_pci_bridge(struct pci_dev *dev) } EXPORT_SYMBOL(of_scan_pci_bridge); +static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus, + struct device_node *dn) +{ + struct pci_dev *dev = NULL; + const u32 *reg; + int reglen, devfn; + + pr_debug(" * %s\n", dn->full_name); + if (!of_device_is_available(dn)) + return NULL; + + reg = of_get_property(dn, "reg", ®len); + if (reg == NULL || reglen < 20) + return NULL; + devfn = (reg[0] >> 8) & 0xff; + + /* Check if the PCI device is already there */ + dev = pci_get_slot(bus, devfn); + if (dev) { + pci_dev_put(dev); + return dev; + } + + /* create a new pci_dev for this device */ + dev = of_create_pci_dev(dn, bus, devfn); + if (!dev) + return NULL; + + pr_debug(" dev header type: %x\n", dev->hdr_type); + return dev; +} + /** * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices * @node: device tree node for the PCI bus @@ -302,8 +337,6 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus, int rescan_existing) { struct device_node *child; - const u32 *reg; - int reglen, devfn; struct pci_dev *dev; pr_debug("of_scan_bus(%s) bus no %d...\n", @@ -311,16 +344,7 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus, /* Scan direct children */ for_each_child_of_node(node, child) { - pr_debug(" * %s\n", child->full_name); - if (!of_device_is_available(child)) - continue; - reg = of_get_property(child, "reg", ®len); - if (reg == NULL || reglen < 20) - continue; - devfn = (reg[0] >> 8) & 0xff; - - /* create a new pci_dev for this device */ - dev = of_create_pci_dev(child, bus, devfn); + dev = of_scan_pci_dev(bus, child); if (!dev) continue; pr_debug(" dev header type: %x\n", dev->hdr_type); diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 5eccda9fd33f..607902424e73 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -644,7 +644,8 @@ unsigned char ibm_architecture_vec[] = { W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */ W(0xffff0000), W(0x003e0000), /* POWER6 */ W(0xffff0000), W(0x003f0000), /* POWER7 */ - W(0xffff0000), W(0x004b0000), /* POWER8 */ + W(0xffff0000), W(0x004b0000), /* POWER8E */ + W(0xffff0000), W(0x004d0000), /* POWER8 */ W(0xffffffff), W(0x0f000004), /* all 2.07-compliant */ W(0xffffffff), W(0x0f000003), /* all 2.06-compliant */ W(0xffffffff), W(0x0f000002), /* all 2.05-compliant */ @@ -706,7 +707,7 @@ unsigned char ibm_architecture_vec[] = { * must match by the macro below. Update the definition if * the structure layout changes. */ -#define IBM_ARCH_VEC_NRCORES_OFFSET 117 +#define IBM_ARCH_VEC_NRCORES_OFFSET 125 W(NR_CPUS), /* number of cores supported */ 0, 0, diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 654e479802f2..f096e72262f4 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -38,9 +38,6 @@ jiffies = jiffies_64 + 4; #endif SECTIONS { - . = 0; - reloc_start = .; - . = KERNELBASE; /* diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index 3f0c30ae4791..c33d939120c9 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -43,6 +43,7 @@ static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize) { unsigned long va; unsigned int penc; + unsigned long sllp; /* * We need 14 to 65 bits of va for a tlibe of 4K page @@ -64,7 +65,9 @@ static inline void __tlbie(unsigned long vpn, int psize, int apsize, int ssize) /* clear out bits after (52) [0....52.....63] */ va &= ~((1ul << (64 - 52)) - 1); va |= ssize << 8; - va |= mmu_psize_defs[apsize].sllp << 6; + sllp = ((mmu_psize_defs[apsize].sllp & SLB_VSID_L) >> 6) | + ((mmu_psize_defs[apsize].sllp & SLB_VSID_LP) >> 4); + va |= sllp << 5; asm volatile(ASM_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0), %2) : : "r" (va), "r"(0), "i" (CPU_FTR_ARCH_206) : "memory"); @@ -98,6 +101,7 @@ static inline void __tlbiel(unsigned long vpn, int psize, int apsize, int ssize) { unsigned long va; unsigned int penc; + unsigned long sllp; /* VPN_SHIFT can be atmost 12 */ va = vpn << VPN_SHIFT; @@ -113,7 +117,9 @@ static inline void __tlbiel(unsigned long vpn, int psize, int apsize, int ssize) /* clear out bits after(52) [0....52.....63] */ va &= ~((1ul << (64 - 52)) - 1); va |= ssize << 8; - va |= mmu_psize_defs[apsize].sllp << 6; + sllp = ((mmu_psize_defs[apsize].sllp & SLB_VSID_L) >> 6) | + ((mmu_psize_defs[apsize].sllp & SLB_VSID_LP) >> 4); + va |= sllp << 5; asm volatile(".long 0x7c000224 | (%0 << 11) | (0 << 21)" : : "r"(va) : "memory"); break; @@ -554,6 +560,7 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot, seg_off |= vpi << shift; } *vpn = vsid << (SID_SHIFT - VPN_SHIFT) | seg_off >> VPN_SHIFT; + break; case MMU_SEGSIZE_1T: /* We only have 40 - 23 bits of seg_off in avpn */ seg_off = (avpn & 0x1ffff) << 23; @@ -563,6 +570,7 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot, seg_off |= vpi << shift; } *vpn = vsid << (SID_SHIFT_1T - VPN_SHIFT) | seg_off >> VPN_SHIFT; + break; default: *vpn = size = 0; } diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index a3985aee77fe..24a45f91c65f 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1252,8 +1252,11 @@ nocheck: ret = 0; out: - if (has_branch_stack(event)) + if (has_branch_stack(event)) { power_pmu_bhrb_enable(event); + cpuhw->bhrb_filter = ppmu->bhrb_filter_map( + event->attr.branch_sample_type); + } perf_pmu_enable(event->pmu); local_irq_restore(flags); diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c index 96a64d6a8bdf..7466374d2787 100644 --- a/arch/powerpc/perf/power8-pmu.c +++ b/arch/powerpc/perf/power8-pmu.c @@ -561,18 +561,13 @@ static int power8_generic_events[] = { static u64 power8_bhrb_filter_map(u64 branch_sample_type) { u64 pmu_bhrb_filter = 0; - u64 br_privilege = branch_sample_type & ONLY_PLM; - /* BHRB and regular PMU events share the same prvillege state + /* BHRB and regular PMU events share the same privilege state * filter configuration. BHRB is always recorded along with a - * regular PMU event. So privilege state filter criteria for BHRB - * and the companion PMU events has to be the same. As a default - * "perf record" tool sets all privillege bits ON when no filter - * criteria is provided in the command line. So as along as all - * privillege bits are ON or they are OFF, we are good to go. + * regular PMU event. As the privilege state filter is handled + * in the basic PMC configuration of the accompanying regular + * PMU event, we ignore any separate BHRB specific request. */ - if ((br_privilege != 7) && (br_privilege != 0)) - return -1; /* No branch filter requested */ if (branch_sample_type & PERF_SAMPLE_BRANCH_ANY) @@ -621,10 +616,19 @@ static struct power_pmu power8_pmu = { static int __init init_power8_pmu(void) { + int rc; + if (!cur_cpu_spec->oprofile_cpu_type || strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power8")) return -ENODEV; - return register_power_pmu(&power8_pmu); + rc = register_power_pmu(&power8_pmu); + if (rc) + return rc; + + /* Tell userspace that EBB is supported */ + cur_cpu_spec->cpu_user_features2 |= PPC_FEATURE2_EBB; + + return 0; } early_initcall(init_power8_pmu); diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index 969cce73055a..79663d26e6ea 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -114,7 +114,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag) * the root bridge. So it's not reasonable to continue * the probing. */ - if (!dn || !edev) + if (!dn || !edev || edev->pe) return 0; /* Skip for PCI-ISA bridge */ @@ -122,8 +122,19 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag) return 0; /* Initialize eeh device */ - edev->class_code = dev->class; - edev->mode = 0; + edev->class_code = dev->class; + edev->mode &= 0xFFFFFF00; + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + edev->mode |= EEH_DEV_BRIDGE; + if (pci_is_pcie(dev)) { + edev->pcie_cap = pci_pcie_cap(dev); + + if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) + edev->mode |= EEH_DEV_ROOT_PORT; + else if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM) + edev->mode |= EEH_DEV_DS_PORT; + } + edev->config_addr = ((dev->bus->number << 8) | dev->devfn); edev->pe_config_addr = phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff); diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 49b57b9f835d..d8140b125e62 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -1266,7 +1266,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE); } -void pnv_pci_init_ioda2_phb(struct device_node *np) +void __init pnv_pci_init_ioda2_phb(struct device_node *np) { pnv_pci_init_ioda_phb(np, 0, PNV_PHB_IODA2); } diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 1bd3399146ed..62b4f8025de0 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -19,7 +19,6 @@ config PPC_PSERIES select ZLIB_DEFLATE select PPC_DOORBELL select HAVE_CONTEXT_TRACKING - select HOTPLUG if SMP select HOTPLUG_CPU if SMP default y diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index b456b157d33d..7fbc25b1813f 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -133,6 +133,48 @@ static int pseries_eeh_init(void) return 0; } +static int pseries_eeh_cap_start(struct device_node *dn) +{ + struct pci_dn *pdn = PCI_DN(dn); + u32 status; + + if (!pdn) + return 0; + + rtas_read_config(pdn, PCI_STATUS, 2, &status); + if (!(status & PCI_STATUS_CAP_LIST)) + return 0; + + return PCI_CAPABILITY_LIST; +} + + +static int pseries_eeh_find_cap(struct device_node *dn, int cap) +{ + struct pci_dn *pdn = PCI_DN(dn); + int pos = pseries_eeh_cap_start(dn); + int cnt = 48; /* Maximal number of capabilities */ + u32 id; + + if (!pos) + return 0; + + while (cnt--) { + rtas_read_config(pdn, pos, 1, &pos); + if (pos < 0x40) + break; + pos &= ~3; + rtas_read_config(pdn, pos + PCI_CAP_LIST_ID, 1, &id); + if (id == 0xff) + break; + if (id == cap) + return pos; + pos += PCI_CAP_LIST_NEXT; + } + + return 0; +} + /** * pseries_eeh_of_probe - EEH probe on the given device * @dn: OF node @@ -146,14 +188,16 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag) { struct eeh_dev *edev; struct eeh_pe pe; + struct pci_dn *pdn = PCI_DN(dn); const u32 *class_code, *vendor_id, *device_id; const u32 *regs; + u32 pcie_flags; int enable = 0; int ret; /* Retrieve OF node and eeh device */ edev = of_node_to_eeh_dev(dn); - if (!of_device_is_available(dn)) + if (edev->pe || !of_device_is_available(dn)) return NULL; /* Retrieve class/vendor/device IDs */ @@ -167,9 +211,26 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag) if (dn->type && !strcmp(dn->type, "isa")) return NULL; - /* Update class code and mode of eeh device */ + /* + * Update class code and mode of eeh device. We need + * correctly reflects that current device is root port + * or PCIe switch downstream port. + */ edev->class_code = *class_code; - edev->mode = 0; + edev->pcie_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_EXP); + edev->mode &= 0xFFFFFF00; + if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) { + edev->mode |= EEH_DEV_BRIDGE; + if (edev->pcie_cap) { + rtas_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS, + 2, &pcie_flags); + pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4; + if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT) + edev->mode |= EEH_DEV_ROOT_PORT; + else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM) + edev->mode |= EEH_DEV_DS_PORT; + } + } /* Retrieve the device address */ regs = of_get_property(dn, "reg", NULL); diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 02d6e21619bb..8bad880bd177 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -146,7 +146,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, flags = 0; /* Make pHyp happy */ - if ((rflags & _PAGE_NO_CACHE) & !(rflags & _PAGE_WRITETHRU)) + if ((rflags & _PAGE_NO_CACHE) && !(rflags & _PAGE_WRITETHRU)) hpte_r &= ~_PAGE_COHERENT; if (firmware_has_feature(FW_FEATURE_XCMO) && !(hpte_r & HPTE_R_N)) flags |= H_COALESCE_CAND; diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 7b3cbde8c783..721c0586b284 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -287,6 +287,9 @@ static struct rtas_error_log *fwnmi_get_errinfo(struct pt_regs *regs) unsigned long *savep; struct rtas_error_log *h, *errhdr = NULL; + /* Mask top two bits */ + regs->gpr[3] &= ~(0x3UL << 62); + if (!VALID_FWNMI_BUFFER(regs->gpr[3])) { printk(KERN_ERR "FWNMI: corrupt r3 0x%016lx\n", regs->gpr[3]); return NULL; diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c index b29e20b7862f..bb7af78e4eed 100644 --- a/drivers/pci/hotplug/rpadlpar_core.c +++ b/drivers/pci/hotplug/rpadlpar_core.c @@ -388,7 +388,6 @@ int dlpar_remove_pci_slot(char *drc_name, struct device_node *dn) /* Remove the EADS bridge device itself */ BUG_ON(!bus->self); pr_debug("PCI: Now removing bridge device %s\n", pci_name(bus->self)); - eeh_remove_bus_device(bus->self, true); pci_stop_and_remove_bus_device(bus->self); return 0; |
