diff options
23 files changed, 2164 insertions, 141 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 33994271cb3b..3b514672b80e 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1334,6 +1334,9 @@ platforms are moved over to use the flattened-device-tree model. fsl-usb2-mph compatible controllers. Either this property or "port0" (or both) must be defined for "fsl-usb2-mph" compatible controllers. + - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible + controllers. Can be "host", "peripheral", or "otg". Default to + "host" if not defined for backward compatibility. Recommended properties : - interrupts : <a b> where a is the interrupt number and b is a @@ -1367,6 +1370,7 @@ platforms are moved over to use the flattened-device-tree model. #size-cells = <0>; interrupt-parent = <700>; interrupts = <26 1>; + dr_mode = "otg"; phy = "ulpi"; }; diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts new file mode 100644 index 000000000000..096e94ac415f --- /dev/null +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -0,0 +1,148 @@ +/* + * Device Tree Souce for Buffalo KuroboxHD + * + * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use + * the default configuration linkstation_defconfig. + * + * Based on sandpoint.dts + * + * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de> + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + +XXXX add flash parts, rtc, ?? + +build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" + + + */ + +/ { + linux,phandle = <1000>; + model = "KuroboxHD"; + compatible = "linkstation"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + linux,phandle = <2000>; + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,603e { /* Really 8241 */ + linux,phandle = <2100>; + linux,boot-cpu; + device_type = "cpu"; + reg = <0>; + clock-frequency = <bebc200>; /* Fixed by bootwrapper */ + timebase-frequency = <1743000>; /* Fixed by bootwrapper */ + bus-frequency = <0>; /* From bootloader */ + /* Following required by dtc but not used */ + i-cache-line-size = <0>; + d-cache-line-size = <0>; + i-cache-size = <4000>; + d-cache-size = <4000>; + }; + }; + + memory { + linux,phandle = <3000>; + device_type = "memory"; + reg = <00000000 04000000>; + }; + + soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ + linux,phandle = <4000>; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + compatible = "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + reg = <80000000 00100000>; + ranges = <80000000 80000000 70000000 /* pci mem space */ + fc000000 fc000000 00100000 /* EUMB */ + fe000000 fe000000 00c00000 /* pci i/o space */ + fec00000 fec00000 00300000 /* pci cfg regs */ + fef00000 fef00000 00100000>; /* pci iack */ + + i2c@80003000 { + linux,phandle = <4300>; + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <80003000 1000>; + interrupts = <5 2>; + interrupt-parent = <4400>; + }; + + serial@80004500 { + linux,phandle = <4511>; + device_type = "serial"; + compatible = "ns16550"; + reg = <80004500 8>; + clock-frequency = <5d08d88>; + current-speed = <2580>; + interrupts = <9 2>; + interrupt-parent = <4400>; + }; + + serial@80004600 { + linux,phandle = <4512>; + device_type = "serial"; + compatible = "ns16550"; + reg = <80004600 8>; + clock-frequency = <5d08d88>; + current-speed = <e100>; + interrupts = <a 0>; + interrupt-parent = <4400>; + }; + + pic@80040000 { + linux,phandle = <4400>; + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <80040000 40000>; + built-in; + }; + + pci@fec00000 { + linux,phandle = <4500>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = <fec00000 400000>; + ranges = <01000000 0 0 fe000000 0 00c00000 + 02000000 0 80000000 80000000 0 70000000>; + bus-range = <0 ff>; + clock-frequency = <7f28155>; + interrupt-parent = <4400>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x11 - IRQ0 ETH */ + 5800 0 0 1 4400 0 1 + 5800 0 0 2 4400 1 1 + 5800 0 0 3 4400 2 1 + 5800 0 0 4 4400 3 1 + /* IDSEL 0x12 - IRQ1 IDE0 */ + 6000 0 0 1 4400 1 1 + 6000 0 0 2 4400 2 1 + 6000 0 0 3 4400 3 1 + 6000 0 0 4 4400 0 1 + /* IDSEL 0x14 - IRQ3 USB2.0 */ + 7000 0 0 1 4400 3 1 + 7000 0 0 2 4400 3 1 + 7000 0 0 3 4400 3 1 + 7000 0 0 4 4400 3 1 + >; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts new file mode 100644 index 000000000000..3d2f5a06df3f --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -0,0 +1,219 @@ +/* + * MPC8313E RDB Device Tree Source + * + * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8313ERDB"; + compatible = "MPC83xx"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8313@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 08000000>; // 128MB at 0 + }; + + soc8313@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <e 8>; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <f 8>; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <700>; + interrupts = <13 2>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@4 { + linux,phandle = <2452004>; + interrupt-parent = <700>; + interrupts = <14 2>; + reg = <4>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <25 8 24 8 23 8>; + interrupt-parent = <700>; + phy-handle = <2452001>; + }; + + ethernet@25000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <22 8 21 8 20 8>; + interrupt-parent = <700>; + phy-handle = <2452004>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <a 8>; + interrupt-parent = <700>; + }; + + pci@8500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x0E -mini PCI */ + 7000 0 0 1 700 12 8 + 7000 0 0 2 700 12 8 + 7000 0 0 3 700 12 8 + 7000 0 0 4 700 12 8 + + /* IDSEL 0x0F - PCI slot */ + 7800 0 0 1 700 11 8 + 7800 0 0 2 700 12 8 + 7800 0 0 3 700 11 8 + 7800 0 0 4 700 12 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 7000>; + interrupts = <b 8>; + interrupt-parent = <700>; + /* Rev. 2.2 */ + num-channels = <1>; + channel-fifo-len = <18>; + exec-units-mask = <0000004c>; + descriptor-types-mask = <0122003f>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index efceb3432653..dc121b3cb4a9 100644 --- a/arch/powerpc/boot/dts/mpc8349emds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -39,6 +39,11 @@ reg = <00000000 10000000>; // 256MB at 0 }; + bcsr@e2400000 { + device_type = "board-control"; + reg = <e2400000 8000>; + }; + soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -103,6 +108,7 @@ #size-cells = <0>; interrupt-parent = <700>; interrupts = <26 2>; + dr_mode = "otg"; phy_type = "ulpi"; }; diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 405c1c908213..dde66a597a8d 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Mon Jan 22 22:17:58 2007 +# Linux kernel version: 2.6.20-rc6 +# Sun Jan 28 23:13:56 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -58,7 +58,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # -CONFIG_LOCALVERSION="-kuroboxHG" +CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y @@ -206,7 +206,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -# CONFIG_SECCOMP is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # @@ -312,39 +312,40 @@ CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set # CONFIG_NF_CONNTRACK_MARK is not set # CONFIG_NF_CONNTRACK_EVENTS is not set -# CONFIG_NF_CT_PROTO_SCTP is not set -# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m -# CONFIG_NF_CONNTRACK_H323 is not set +CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -# CONFIG_NF_CONNTRACK_PPTP is not set -# CONFIG_NF_CONNTRACK_SIP is not set +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set -CONFIG_NETFILTER_XT_TARGET_MARK=m +# CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATE is not set +CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set @@ -359,12 +360,12 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m # CONFIG_IP_NF_MATCH_TOS is not set -# CONFIG_IP_NF_MATCH_RECENT is not set +CONFIG_IP_NF_MATCH_RECENT=m # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_OWNER is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m # CONFIG_IP_NF_TARGET_LOG is not set @@ -374,16 +375,17 @@ CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set # CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_TFTP=m -# CONFIG_NF_NAT_AMANDA is not set -# CONFIG_NF_NAT_PPTP is not set -# CONFIG_NF_NAT_H323 is not set -# CONFIG_NF_NAT_SIP is not set +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -472,6 +474,7 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -518,6 +521,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0xffc00000 CONFIG_MTD_PHYSMAP_LEN=0x400000 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_OF is not set # CONFIG_MTD_PLATRAM is not set # @@ -540,6 +544,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set # # OneNAND Flash Device Drivers @@ -696,7 +701,7 @@ CONFIG_ATA=y # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set +CONFIG_PATA_IT821X=y # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -763,11 +768,33 @@ CONFIG_TUN=m # # PHY device support # +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # -# CONFIG_NET_ETHERNET is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=y +# CONFIG_TULIP_MWI is not set +CONFIG_TULIP_MMIO=y +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set # # Ethernet (1000 Mbit) @@ -829,7 +856,8 @@ CONFIG_NET_RADIO=y # CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set # CONFIG_BCM43XX is not set -# CONFIG_ZD1211RW is not set +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set CONFIG_NET_WIRELESS=y # @@ -1098,7 +1126,7 @@ CONFIG_DUMMY_CONSOLE=y # # HID Devices # -CONFIG_HID=y +CONFIG_HID=m # # USB support @@ -1115,7 +1143,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -1136,7 +1163,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # USB Device Class drivers # # CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set +CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1371,7 +1398,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set @@ -1461,7 +1492,12 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1495,7 +1531,7 @@ CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set +CONFIG_NLS_CODEPAGE_932=m # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set @@ -1526,12 +1562,14 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m CONFIG_PLIST=y CONFIG_IOMAP_COPY=y diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/mpc8313_rdb_defconfig new file mode 100644 index 000000000000..f87523716c44 --- /dev/null +++ b/arch/powerpc/configs/mpc8313_rdb_defconfig @@ -0,0 +1,1409 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Wed Feb 7 22:08:04 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +CONFIG_MPC8313_RDB=y +# CONFIG_MPC832x_MDS is not set +# CONFIG_MPC834x_SYS is not set +# CONFIG_MPC834x_ITX is not set +# CONFIG_MPC8360E_PB is not set +CONFIG_PPC_MPC831x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xfe000000 +CONFIG_MTD_PHYSMAP_LEN=0x1000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_MPC83xx=y + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_NET2280=y +CONFIG_USB_NET2280=y +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y + +# +# DMA Devices +# +CONFIG_INTEL_IOATDMA=y + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig index 9eaed3a36983..2e3f8efb6ab1 100644 --- a/arch/powerpc/configs/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Fri Jan 26 00:19:27 2007 +# Linux kernel version: 2.6.20 +# Thu Feb 8 01:00:48 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_PPC_83xx=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set -# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_83xx=y @@ -128,8 +128,9 @@ CONFIG_PPC_GEN550=y # # Platform support # +# CONFIG_MPC8313_RDB is not set # CONFIG_MPC832x_MDS is not set -CONFIG_MPC834x_SYS=y +CONFIG_MPC834x_MDS=y # CONFIG_MPC834x_ITX is not set # CONFIG_MPC8360E_PB is not set CONFIG_MPC834x=y diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index bd02272bcb0f..c284bdac9947 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -295,7 +295,7 @@ void __init mapin_ram(void) } /* is x a power of 4? */ -#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)) +#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1) /* * Set up a mapping for a block of I/O. diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index edcd5b875b66..1aea1e69ff31 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -3,7 +3,13 @@ menu "Platform support" choice prompt "Machine Type" - default MPC834x_SYS + default MPC834x_MDS + +config MPC8313_RDB + bool "Freescale MPC8313 RDB" + select DEFAULT_UIMAGE + help + This option enables support for the MPC8313 RDB board. config MPC832x_MDS bool "Freescale MPC832x MDS" @@ -12,13 +18,13 @@ config MPC832x_MDS help This option enables support for the MPC832x MDS evaluation board. -config MPC834x_SYS - bool "Freescale MPC834x SYS" +config MPC834x_MDS + bool "Freescale MPC834x MDS" select DEFAULT_UIMAGE help - This option enables support for the MPC 834x SYS evaluation board. + This option enables support for the MPC 834x MDS evaluation board. - Be aware that PCI buses can only function when SYS board is plugged + Be aware that PCI buses can only function when MDS board is plugged into the PIB (Platform IO Board) board from Freescale which provide 3 PCI slots. The PIBs PCI initialization is the bootloader's responsibility. @@ -41,6 +47,12 @@ config MPC8360E_PB endchoice +config PPC_MPC831x + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8313_RDB + config PPC_MPC832x bool select PPC_UDBG_16550 @@ -51,7 +63,7 @@ config MPC834x bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC834x_SYS || MPC834x_ITX + default y if MPC834x_MDS || MPC834x_ITX config PPC_MPC836x bool diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index f1aa7e24a938..6c8199c4c382 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -3,7 +3,8 @@ # obj-y := misc.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o +obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o +obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c new file mode 100644 index 000000000000..c3b98c34eb6b --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c @@ -0,0 +1,99 @@ +/* + * arch/powerpc/platforms/83xx/mpc8313_rdb.c + * + * Description: MPC8313x RDB board specific routines. + * This file is based on mpc834x_sys.c + * Author: Lo Wlison <r43300@freescale.com> + * + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/pci.h> + +#include <asm/time.h> +#include <asm/ipic.h> +#include <asm/udbg.h> + +#include "mpc83xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc8313_rdb_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc8313_rdb_setup_arch()", 0); + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif +} + +void __init mpc8313_rdb_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc8313_rdb_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC8313ERDB")) + return 0; + + DBG("MPC8313 RDB found\n"); + + return 1; +} + +define_machine(mpc8313_rdb) { + .name = "MPC8313 RDB", + .probe = mpc8313_rdb_probe, + .setup_arch = mpc8313_rdb_setup_arch, + .init_IRQ = mpc8313_rdb_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 2446dea9407e..443a3172f370 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -38,8 +38,6 @@ #include "mpc83xx.h" -#include <platforms/83xx/mpc834x_sys.h> - #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index f30393f0b832..d2736da76c46 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -1,7 +1,7 @@ /* - * arch/powerpc/platforms/83xx/mpc834x_sys.c + * arch/powerpc/platforms/83xx/mpc834x_mds.c * - * MPC834x SYS board specific routines + * MPC834x MDS board specific routines * * Maintainer: Kumar Gala <galak@kernel.crashing.org> * @@ -43,17 +43,87 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif +#define BCSR5_INT_USB 0x02 +/* Note: This is only for PB, not for PB+PIB + * On PB only port0 is connected using ULPI */ +static int mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl; + void __iomem *immap; + void __iomem *bcsr_regs = NULL; + u8 bcsr5; + struct device_node *np = NULL; + int port0_is_dr = 0; + + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) + port0_is_dr = 1; + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ + if (port0_is_dr) { + printk(KERN_WARNING + "There is only one USB port on PB board! \n"); + return -1; + } else if (!port0_is_dr) + /* No usb port enabled */ + return -1; + } + + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) + return -1; + + /* Configure clock */ + sccr = in_be32(immap + MPC83XX_SCCR_OFFS); + if (port0_is_dr) + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + else + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + out_be32(immap + MPC83XX_SCCR_OFFS, sccr); + + /* Configure Pin */ + sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); + /* set port0 only */ + if (port0_is_dr) + sicrl |= MPC83XX_SICRL_USB0; + else + sicrl &= ~(MPC83XX_SICRL_USB0); + out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); + + iounmap(immap); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != 0) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start + 1); + of_node_put(np); + } + if (!bcsr_regs) + return -1; + + /* + * if MDS board is plug into PIB board, + * force to use the PHY on MDS board + */ + bcsr5 = in_8(bcsr_regs + 5); + if (!(bcsr5 & BCSR5_INT_USB)) + out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); + iounmap(bcsr_regs); + return 0; +} + /* ************************************************************************ * * Setup the architecture * */ -static void __init mpc834x_sys_setup_arch(void) +static void __init mpc834x_mds_setup_arch(void) { struct device_node *np; if (ppc_md.progress) - ppc_md.progress("mpc834x_sys_setup_arch()", 0); + ppc_md.progress("mpc834x_mds_setup_arch()", 0); np = of_find_node_by_type(NULL, "cpu"); if (np != 0) { @@ -65,6 +135,7 @@ static void __init mpc834x_sys_setup_arch(void) loops_per_jiffy = 50000000 / HZ; of_node_put(np); } + #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); @@ -72,6 +143,8 @@ static void __init mpc834x_sys_setup_arch(void) ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif + mpc834x_usb_cfg(); + #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else @@ -79,7 +152,7 @@ static void __init mpc834x_sys_setup_arch(void) #endif } -static void __init mpc834x_sys_init_IRQ(void) +static void __init mpc834x_mds_init_IRQ(void) { struct device_node *np; @@ -119,7 +192,7 @@ late_initcall(mpc834x_rtc_hookup); /* * Called very early, MMU is off, device-tree isn't unflattened */ -static int __init mpc834x_sys_probe(void) +static int __init mpc834x_mds_probe(void) { /* We always match for now, eventually we should look at the flat dev tree to ensure this is the board we are suppose to run on @@ -127,11 +200,11 @@ static int __init mpc834x_sys_probe(void) return 1; } -define_machine(mpc834x_sys) { - .name = "MPC834x SYS", - .probe = mpc834x_sys_probe, - .setup_arch = mpc834x_sys_setup_arch, - .init_IRQ = mpc834x_sys_init_IRQ, +define_machine(mpc834x_mds) { + .name = "MPC834x MDS", + .probe = mpc834x_mds_probe, + .setup_arch = mpc834x_mds_setup_arch, + .init_IRQ = mpc834x_mds_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.h b/arch/powerpc/platforms/83xx/mpc834x_sys.h deleted file mode 100644 index 7d5bbef084e7..000000000000 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/powerpc/platforms/83xx/mpc834x_sys.h - * - * MPC834X SYS common board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC83XX_SYS_H__ -#define __MACH_MPC83XX_SYS_H__ - -#define PIRQA MPC83xx_IRQ_EXT4 -#define PIRQB MPC83xx_IRQ_EXT5 -#define PIRQC MPC83xx_IRQ_EXT6 -#define PIRQD MPC83xx_IRQ_EXT7 - -#endif /* __MACH_MPC83XX_SYS_H__ */ diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 01cae106912b..9cd03b59c8f4 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -4,6 +4,24 @@ #include <linux/init.h> #include <linux/device.h> +/* System Clock Control Register */ +#define MPC83XX_SCCR_OFFS 0xA08 +#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000 +#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000 +#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000 +#define MPC83XX_SCCR_USB_DRCM_11 0x00300000 +#define MPC83XX_SCCR_USB_DRCM_01 0x00100000 +#define MPC83XX_SCCR_USB_DRCM_10 0x00200000 + +/* system i/o configuration register low */ +#define MPC83XX_SICRL_OFFS 0x114 +#define MPC83XX_SICRL_USB0 0x40000000 +#define MPC83XX_SICRL_USB1 0x20000000 + +/* system i/o configuration register high */ +#define MPC83XX_SICRH_OFFS 0x118 +#define MPC83XX_SICRH_USB_UTMI 0x00020000 + /* * Declaration for the various functions exported by the * mpc83xx_* files. Mostly for use by mpc83xx_setup diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index bda2e55e6c4c..c56fce57621c 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -45,8 +45,7 @@ unsigned long isa_mem_base = 0; #endif #ifdef CONFIG_PCI -int -mpc85xx_exclude_device(u_char bus, u_char devfn) +static int mpc85xx_exclude_device(u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; @@ -69,7 +68,7 @@ static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) #endif /* CONFIG_CPM2 */ -void __init mpc85xx_ads_pic_init(void) +static void __init mpc85xx_ads_pic_init(void) { struct mpic *mpic; struct resource r; @@ -254,7 +253,7 @@ static void __init mpc85xx_ads_setup_arch(void) #endif } -void mpc85xx_ads_show_cpuinfo(struct seq_file *m) +static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; uint memsize = total_memory; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 953cd5dd3f54..abc0aca6de40 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -56,7 +56,6 @@ unsigned long isa_mem_base = 0; static int cds_pci_slot = 2; static volatile u8 *cadmus; - #ifdef CONFIG_PCI #define ARCADIA_HOST_BRIDGE_IDSEL 17 @@ -64,8 +63,7 @@ static volatile u8 *cadmus; extern int mpc85xx_pci2_busno; -int -mpc85xx_exclude_device(u_char bus, u_char devfn) +static int mpc85xx_exclude_device(u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; @@ -81,8 +79,7 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } -void __init -mpc85xx_cds_pcibios_fixup(void) +static void __init mpc85xx_cds_pcibios_fixup(void) { struct pci_dev *dev; u_char c; @@ -144,7 +141,7 @@ static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc) #endif /* PPC_I8259 */ #endif /* CONFIG_PCI */ -void __init mpc85xx_cds_pic_init(void) +static void __init mpc85xx_cds_pic_init(void) { struct mpic *mpic; struct resource r; @@ -224,12 +221,10 @@ void __init mpc85xx_cds_pic_init(void) #endif /* CONFIG_PPC_I8259 */ } - /* * Setup the architecture */ -static void __init -mpc85xx_cds_setup_arch(void) +static void __init mpc85xx_cds_setup_arch(void) { struct device_node *cpu; #ifdef CONFIG_PCI @@ -276,9 +271,7 @@ mpc85xx_cds_setup_arch(void) #endif } - -void -mpc85xx_cds_show_cpuinfo(struct seq_file *m) +static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; uint memsize = total_memory; diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index 61599d919ea8..3f6c4114f908 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/initrd.h> -#include <linux/root_dev.h> #include <linux/mtd/physmap.h> #include <asm/time.h> @@ -91,17 +90,6 @@ static void __init linkstation_setup_arch(void) ARRAY_SIZE(linkstation_physmap_partitions)); #endif -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif - /* Lookup PCI host bridges */ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 9f2a9a444bfb..34161bc5a02f 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -441,7 +441,8 @@ static int __init fsl_usb_of_init(void) { struct device_node *np; unsigned int i; - struct platform_device *usb_dev_mph = NULL, *usb_dev_dr = NULL; + struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL, + *usb_dev_dr_client = NULL; int ret; for (np = NULL, i = 0; @@ -507,33 +508,72 @@ static int __init fsl_usb_of_init(void) of_irq_to_resource(np, 0, &r[1]); - usb_dev_dr = - platform_device_register_simple("fsl-ehci", i, r, 2); - if (IS_ERR(usb_dev_dr)) { - ret = PTR_ERR(usb_dev_dr); + prop = get_property(np, "dr_mode", NULL); + + if (!prop || !strcmp(prop, "host")) { + usb_data.operating_mode = FSL_USB2_DR_HOST; + usb_dev_dr_host = platform_device_register_simple( + "fsl-ehci", i, r, 2); + if (IS_ERR(usb_dev_dr_host)) { + ret = PTR_ERR(usb_dev_dr_host); + goto err; + } + } else if (prop && !strcmp(prop, "peripheral")) { + usb_data.operating_mode = FSL_USB2_DR_DEVICE; + usb_dev_dr_client = platform_device_register_simple( + "fsl-usb2-udc", i, r, 2); + if (IS_ERR(usb_dev_dr_client)) { + ret = PTR_ERR(usb_dev_dr_client); + goto err; + } + } else if (prop && !strcmp(prop, "otg")) { + usb_data.operating_mode = FSL_USB2_DR_OTG; + usb_dev_dr_host = platform_device_register_simple( + "fsl-ehci", i, r, 2); + if (IS_ERR(usb_dev_dr_host)) { + ret = PTR_ERR(usb_dev_dr_host); + goto err; + } + usb_dev_dr_client = platform_device_register_simple( + "fsl-usb2-udc", i, r, 2); + if (IS_ERR(usb_dev_dr_client)) { + ret = PTR_ERR(usb_dev_dr_client); + goto err; + } + } else { + ret = -EINVAL; goto err; } - usb_dev_dr->dev.coherent_dma_mask = 0xffffffffUL; - usb_dev_dr->dev.dma_mask = &usb_dev_dr->dev.coherent_dma_mask; - - usb_data.operating_mode = FSL_USB2_DR_HOST; - prop = get_property(np, "phy_type", NULL); usb_data.phy_mode = determine_usb_phy(prop); - ret = - platform_device_add_data(usb_dev_dr, &usb_data, - sizeof(struct - fsl_usb2_platform_data)); - if (ret) - goto unreg_dr; + if (usb_dev_dr_host) { + usb_dev_dr_host->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev_dr_host->dev.dma_mask = &usb_dev_dr_host-> + dev.coherent_dma_mask; + if ((ret = platform_device_add_data(usb_dev_dr_host, + &usb_data, sizeof(struct + fsl_usb2_platform_data)))) + goto unreg_dr; + } + if (usb_dev_dr_client) { + usb_dev_dr_client->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev_dr_client->dev.dma_mask = &usb_dev_dr_client-> + dev.coherent_dma_mask; + if ((ret = platform_device_add_data(usb_dev_dr_client, + &usb_data, sizeof(struct + fsl_usb2_platform_data)))) + goto unreg_dr; + } } return 0; unreg_dr: - if (usb_dev_dr) - platform_device_unregister(usb_dev_dr); + if (usb_dev_dr_host) + platform_device_unregister(usb_dev_dr_host); + if (usb_dev_dr_client) + platform_device_unregister(usb_dev_dr_client); unreg_mph: if (usb_dev_mph) platform_device_unregister(usb_dev_mph); @@ -699,7 +739,7 @@ static int __init fs_enet_of_init(void) if (ret) goto unreg; } - + of_node_put(phy); of_node_put(mdio); diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 47b56203f47e..0e97e5c94f8a 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -179,7 +179,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_info = us_info; uccs->saved_uccm = 0; uccs->p_rx_frame = 0; - uccs->us_regs = us_info->us_regs; + uccs->us_regs = us_info->regs; us_regs = uccs->us_regs; uccs->p_ucce = (u16 *) & (us_regs->ucce); uccs->p_uccm = (u16 *) & (us_regs->uccm); @@ -206,7 +206,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); /* Init Guemr register */ - if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) { + if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) { uccs_err("ucc_slow_init: Could not init the guemr register."); ucc_slow_free(uccs); return ret; @@ -214,7 +214,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Set UCC to slow type */ if ((ret = ucc_set_type(us_info->ucc_num, - (struct ucc_common *) (us_info->us_regs), + (struct ucc_common *) (us_info->regs), UCC_SPEED_TYPE_SLOW))) { uccs_err("ucc_slow_init: Could not init the guemr register."); ucc_slow_free(uccs); diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 1f49503317cb..1318b6f4c3df 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -271,7 +271,7 @@ EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */ extern long *intercept_table; EXPORT_SYMBOL(intercept_table); #endif /* CONFIG_PPC_STD_MMU */ -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_DCR_NATIVE EXPORT_SYMBOL(__mtdcr); EXPORT_SYMBOL(__mfdcr); #endif diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 82b06a1ef95d..c023b7298809 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -314,7 +314,7 @@ void __init mapin_ram(void) } /* is x a power of 4? */ -#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)) +#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1) /* * Set up a mapping for a block of I/O. diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h index ca93bc99237e..1babad99c719 100644 --- a/include/asm-powerpc/ucc_slow.h +++ b/include/asm-powerpc/ucc_slow.h @@ -150,7 +150,7 @@ struct ucc_slow_info { int ucc_num; enum qe_clock rx_clock; enum qe_clock tx_clock; - struct ucc_slow *us_regs; + struct ucc_slow *regs; int irq; u16 uccm_mask; int data_mem_part; |
