diff options
147 files changed, 8305 insertions, 9862 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 85f8bf4112c1..56dd6650c97a 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -16,118 +16,9 @@ menuconfig WLAN if WLAN -menuconfig WLAN_PRE80211 - bool "Wireless LAN (pre-802.11)" - depends on NETDEVICES - ---help--- - Say Y if you have any pre-802.11 wireless LAN hardware. - - This option does not affect the kernel build, it only - lets you choose drivers. - -config STRIP - tristate "STRIP (Metricom starmode radio IP)" - depends on INET && WLAN_PRE80211 - select WIRELESS_EXT - ---help--- - Say Y if you have a Metricom radio and intend to use Starmode Radio - IP. STRIP is a radio protocol developed for the MosquitoNet project - to send Internet traffic using Metricom radios. Metricom radios are - small, battery powered, 100kbit/sec packet radio transceivers, about - the size and weight of a cellular telephone. (You may also have heard - them called "Metricom modems" but we avoid the term "modem" because - it misleads many people into thinking that you can plug a Metricom - modem into a phone line and use it as a modem.) - - You can use STRIP on any Linux machine with a serial port, although - it is obviously most useful for people with laptop computers. If you - think you might get a Metricom radio in the future, there is no harm - in saying Y to STRIP now, except that it makes the kernel a bit - bigger. - - To compile this as a module, choose M here: the module will be - called strip. - -config ARLAN - tristate "Aironet Arlan 655 & IC2200 DS support" - depends on ISA && !64BIT && WLAN_PRE80211 - select WIRELESS_EXT - ---help--- - Aironet makes Arlan, a class of wireless LAN adapters. These use the - www.Telxon.com chip, which is also used on several similar cards. - This driver is tested on the 655 and IC2200 series cards. Look at - <http://www.ylenurme.ee/~elmer/655/> for the latest information. - - The driver is built as two modules, arlan and arlan-proc. The latter - is the /proc interface and is not needed most of time. - - On some computers the card ends up in non-valid state after some - time. Use a ping-reset script to clear it. - -config WAVELAN - tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support" - depends on ISA && WLAN_PRE80211 - select WIRELESS_EXT - select WEXT_SPY - select WEXT_PRIV - ---help--- - The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is - a Radio LAN (wireless Ethernet-like Local Area Network) using the - radio frequencies 900 MHz and 2.4 GHz. - - If you want to use an ISA WaveLAN card under Linux, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. Some more specific - information is contained in - <file:Documentation/networking/wavelan.txt> and in the source code - <file:drivers/net/wireless/wavelan.p.h>. - - You will also need the wireless tools package available from - <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. - Please read the man pages contained therein. - - To compile this driver as a module, choose M here: the module will be - called wavelan. - -config PCMCIA_WAVELAN - tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support" - depends on PCMCIA && WLAN_PRE80211 - select WIRELESS_EXT - select WEXT_SPY - select WEXT_PRIV - help - Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA - (PC-card) wireless Ethernet networking card to your computer. This - driver is for the non-IEEE-802.11 Wavelan cards. - - To compile this driver as a module, choose M here: the module will be - called wavelan_cs. If unsure, say N. - -config PCMCIA_NETWAVE - tristate "Xircom Netwave AirSurfer Pcmcia wireless support" - depends on PCMCIA && WLAN_PRE80211 - select WIRELESS_EXT - select WEXT_PRIV - help - Say Y here if you intend to attach this type of PCMCIA (PC-card) - wireless Ethernet networking card to your computer. - - To compile this driver as a module, choose M here: the module will be - called netwave_cs. If unsure, say N. - - -menuconfig WLAN_80211 - bool "Wireless LAN (IEEE 802.11)" - depends on NETDEVICES - ---help--- - Say Y if you have any 802.11 wireless LAN hardware. - - This option does not affect the kernel build, it only - lets you choose drivers. - config PCMCIA_RAYCS tristate "Aviator/Raytheon 2.4GHz wireless support" - depends on PCMCIA && WLAN_80211 + depends on PCMCIA select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV @@ -142,7 +33,7 @@ config PCMCIA_RAYCS config LIBERTAS_THINFIRM tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" - depends on WLAN_80211 && MAC80211 + depends on MAC80211 select FW_LOADER ---help--- A library for Marvell Libertas 8xxx devices using thinfirm. @@ -155,7 +46,7 @@ config LIBERTAS_THINFIRM_USB config AIRO tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" - depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN) + depends on ISA_DMA_API && (PCI || BROKEN) select WIRELESS_EXT select CRYPTO select WEXT_SPY @@ -175,7 +66,7 @@ config AIRO config ATMEL tristate "Atmel at76c50x chipset 802.11b support" - depends on (PCI || PCMCIA) && WLAN_80211 + depends on (PCI || PCMCIA) select WIRELESS_EXT select WEXT_PRIV select FW_LOADER @@ -210,7 +101,7 @@ config PCMCIA_ATMEL config AT76C50X_USB tristate "Atmel at76c503/at76c505/at76c505a USB cards" - depends on MAC80211 && WLAN_80211 && USB + depends on MAC80211 && USB select FW_LOADER ---help--- Enable support for USB Wireless devices using Atmel at76c503, @@ -218,8 +109,9 @@ config AT76C50X_USB config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" - depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211 + depends on PCMCIA && (BROKEN || !M32R) select WIRELESS_EXT + select WEXT_SPY select CRYPTO select CRYPTO_AES ---help--- @@ -238,7 +130,7 @@ config AIRO_CS config PCMCIA_WL3501 tristate "Planet WL3501 PCMCIA cards" - depends on EXPERIMENTAL && PCMCIA && WLAN_80211 + depends on EXPERIMENTAL && PCMCIA select WIRELESS_EXT select WEXT_SPY help @@ -248,7 +140,7 @@ config PCMCIA_WL3501 config PRISM54 tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)' - depends on PCI && EXPERIMENTAL && WLAN_80211 + depends on PCI && EXPERIMENTAL select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV @@ -272,7 +164,7 @@ config PRISM54 config USB_ZD1201 tristate "USB ZD1201 based Wireless device support" - depends on USB && WLAN_80211 + depends on USB select WIRELESS_EXT select WEXT_PRIV select FW_LOADER @@ -291,7 +183,7 @@ config USB_ZD1201 config USB_NET_RNDIS_WLAN tristate "Wireless RNDIS USB support" - depends on USB && WLAN_80211 && EXPERIMENTAL + depends on USB && EXPERIMENTAL depends on CFG80211 select USB_USBNET select USB_NET_CDCETHER @@ -319,7 +211,7 @@ config USB_NET_RNDIS_WLAN config RTL8180 tristate "Realtek 8180/8185 PCI support" - depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL + depends on MAC80211 && PCI && EXPERIMENTAL select EEPROM_93CX6 ---help--- This is a driver for RTL8180 and RTL8185 based cards. @@ -375,7 +267,7 @@ config RTL8180 config RTL8187 tristate "Realtek 8187 and 8187B USB support" - depends on MAC80211 && USB && WLAN_80211 + depends on MAC80211 && USB select EEPROM_93CX6 ---help--- This is a driver for RTL8187 and RTL8187B based cards. @@ -404,7 +296,7 @@ config RTL8187_LEDS config ADM8211 tristate "ADMtek ADM8211 support" - depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL + depends on MAC80211 && PCI && EXPERIMENTAL select CRC32 select EEPROM_93CX6 ---help--- @@ -431,7 +323,7 @@ config ADM8211 config MAC80211_HWSIM tristate "Simulated radio testing tool for mac80211" - depends on MAC80211 && WLAN_80211 + depends on MAC80211 ---help--- This driver is a developer testing tool that can be used to test IEEE 802.11 networking stack (mac80211) functionality. This is not @@ -444,7 +336,7 @@ config MAC80211_HWSIM config MWL8K tristate "Marvell 88W8xxx PCI/PCIe Wireless support" - depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL + depends on MAC80211 && PCI && EXPERIMENTAL ---help--- This driver supports Marvell TOPDOG 802.11 wireless cards. diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 7a4647e78fd3..5d4ce4d2b32b 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -5,16 +5,6 @@ obj-$(CONFIG_IPW2100) += ipw2x00/ obj-$(CONFIG_IPW2200) += ipw2x00/ -obj-$(CONFIG_STRIP) += strip.o -obj-$(CONFIG_ARLAN) += arlan.o - -arlan-objs := arlan-main.o arlan-proc.o - -# Obsolete cards -obj-$(CONFIG_WAVELAN) += wavelan.o -obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o -obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan_cs.o - obj-$(CONFIG_HERMES) += orinoco/ obj-$(CONFIG_AIRO) += airo.o diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig index 6ce86cb37654..4e7a7fd695c8 100644 --- a/drivers/net/wireless/ath/Kconfig +++ b/drivers/net/wireless/ath/Kconfig @@ -1,6 +1,5 @@ menuconfig ATH_COMMON tristate "Atheros Wireless Cards" - depends on WLAN_80211 depends on CFG80211 ---help--- This will enable the support for the Atheros wireless drivers. diff --git a/drivers/net/wireless/ath/ar9170/Kconfig b/drivers/net/wireless/ath/ar9170/Kconfig index 05918f1e685a..d7a4799d20fb 100644 --- a/drivers/net/wireless/ath/ar9170/Kconfig +++ b/drivers/net/wireless/ath/ar9170/Kconfig @@ -1,6 +1,6 @@ config AR9170_USB tristate "Atheros AR9170 802.11n USB support" - depends on USB && MAC80211 && WLAN_80211 + depends on USB && MAC80211 select FW_LOADER help This is a driver for the Atheros "otus" 802.11n USB devices. diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig index 06d006675d7d..eb83b7b4d0e3 100644 --- a/drivers/net/wireless/ath/ath5k/Kconfig +++ b/drivers/net/wireless/ath/ath5k/Kconfig @@ -1,6 +1,6 @@ config ATH5K tristate "Atheros 5xxx wireless cards support" - depends on PCI && MAC80211 && WLAN_80211 + depends on PCI && MAC80211 select MAC80211_LEDS select LEDS_CLASS select NEW_LEDS diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c index b767c3b67b24..7ce98bd7c749 100644 --- a/drivers/net/wireless/ath/ath5k/led.c +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -59,6 +59,8 @@ static const struct pci_device_id ath5k_led_devices[] = { { ATH_SDEVICE(PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID), ATH_LED(1, 1) }, /* Acer Aspire One A150 (maximlevitsky@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_FOXCONN, 0xe008), ATH_LED(3, 0) }, + /* Acer Aspire One AO531h AO751h (keng-yu.lin@canonical.com) */ + { ATH_SDEVICE(PCI_VENDOR_ID_FOXCONN, 0xe00d), ATH_LED(3, 0) }, /* Acer Ferrari 5000 (russ.dill@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) }, /* E-machines E510 (tuliom@gmail.com) */ diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 99ce066392a7..b735fb399fb1 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -3,7 +3,7 @@ config ATH9K_HW config ATH9K tristate "Atheros 802.11n wireless cards support" - depends on PCI && MAC80211 && WLAN_80211 + depends on PCI && MAC80211 select ATH9K_HW select MAC80211_LEDS select LEDS_CLASS diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c index 25531f231b67..329e6bc137ab 100644 --- a/drivers/net/wireless/ath/ath9k/ahb.c +++ b/drivers/net/wireless/ath/ath9k/ahb.c @@ -69,6 +69,7 @@ static int ath_ahb_probe(struct platform_device *pdev) int irq; int ret = 0; struct ath_hw *ah; + char hw_name[64]; if (!pdev->dev.platform_data) { dev_err(&pdev->dev, "no platform data specified\n"); @@ -133,14 +134,11 @@ static int ath_ahb_probe(struct platform_device *pdev) } ah = sc->sc_ah; + ath9k_hw_name(ah, hw_name, sizeof(hw_name)); printk(KERN_INFO - "%s: Atheros AR%s MAC/BB Rev:%x, " - "AR%s RF Rev:%x, mem=0x%lx, irq=%d\n", + "%s: %s mem=0x%lx, irq=%d\n", wiphy_name(hw->wiphy), - ath_mac_bb_name(ah->hw_version.macVersion), - ah->hw_version.macRev, - ath_rf_name((ah->hw_version.analog5GhzRev & AR_RADIO_SREV_MAJOR)), - ah->hw_version.phyRev, + hw_name, (unsigned long)mem, irq); return 0; diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index 551f8801459f..238a5744d8e9 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -877,7 +877,7 @@ static void ath9k_hw_9271_pa_cal(struct ath_hw *ah, bool is_reset) REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9271_AN_RF2G6_OFFS, 0); /* find off_6_1; */ - for (i = 6; i >= 0; i--) { + for (i = 6; i > 0; i--) { regVal = REG_READ(ah, 0x7834); regVal |= (1 << (20 + i)); REG_WRITE(ah, 0x7834, regVal); diff --git a/drivers/net/wireless/ath/ath9k/eeprom_4k.c b/drivers/net/wireless/ath/ath9k/eeprom_4k.c index 58167d861dc6..68db16690abf 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c @@ -1112,6 +1112,10 @@ static void ath9k_hw_4k_set_board_values(struct ath_hw *ah, REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON, pModal->txEndToRxOn); + + if (AR_SREV_9271_10(ah)) + REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON, + pModal->txEndToRxOn); REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62, pModal->thresh62); REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0, AR_PHY_EXT_CCA0_THRESH62, diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index cab17c6c8a37..111ff049f75d 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -30,8 +30,6 @@ static void ath9k_hw_set_regs(struct ath_hw *ah, struct ath9k_channel *chan); static u32 ath9k_hw_ini_fixup(struct ath_hw *ah, struct ar5416_eeprom_def *pEepData, u32 reg, u32 value); -static void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan); -static void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan); MODULE_AUTHOR("Atheros Communications"); MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards."); @@ -454,21 +452,6 @@ static void ath9k_hw_init_defaults(struct ath_hw *ah) ah->power_mode = ATH9K_PM_UNDEFINED; } -static int ath9k_hw_rfattach(struct ath_hw *ah) -{ - bool rfStatus = false; - int ecode = 0; - - rfStatus = ath9k_hw_init_rf(ah, &ecode); - if (!rfStatus) { - ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL, - "RF setup failed, status: %u\n", ecode); - return ecode; - } - - return 0; -} - static int ath9k_hw_rf_claim(struct ath_hw *ah) { u32 val; @@ -585,9 +568,15 @@ static int ath9k_hw_post_init(struct ath_hw *ah) ah->eep_ops->get_eeprom_ver(ah), ah->eep_ops->get_eeprom_rev(ah)); - ecode = ath9k_hw_rfattach(ah); - if (ecode != 0) - return ecode; + if (!AR_SREV_9280_10_OR_LATER(ah)) { + ecode = ath9k_hw_rf_alloc_ext_banks(ah); + if (ecode) { + ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL, + "Failed allocating banks for " + "external radio\n"); + return ecode; + } + } if (!AR_SREV_9100(ah)) { ath9k_hw_ani_setup(ah); @@ -662,10 +651,13 @@ static void ath9k_hw_init_cal_settings(struct ath_hw *ah) static void ath9k_hw_init_mode_regs(struct ath_hw *ah) { if (AR_SREV_9271(ah)) { - INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271_1_0, - ARRAY_SIZE(ar9271Modes_9271_1_0), 6); - INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271_1_0, - ARRAY_SIZE(ar9271Common_9271_1_0), 2); + INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271, + ARRAY_SIZE(ar9271Modes_9271), 6); + INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271, + ARRAY_SIZE(ar9271Common_9271), 2); + INIT_INI_ARRAY(&ah->iniModes_9271_1_0_only, + ar9271Modes_9271_1_0_only, + ARRAY_SIZE(ar9271Modes_9271_1_0_only), 6); return; } @@ -957,8 +949,14 @@ int ath9k_hw_init(struct ath_hw *ah) ath9k_hw_init_cal_settings(ah); ah->ani_function = ATH9K_ANI_ALL; - if (AR_SREV_9280_10_OR_LATER(ah)) + if (AR_SREV_9280_10_OR_LATER(ah)) { ah->ani_function &= ~ATH9K_ANI_NOISE_IMMUNITY_LEVEL; + ah->ath9k_hw_rf_set_freq = &ath9k_hw_ar9280_set_channel; + ah->ath9k_hw_spur_mitigate_freq = &ath9k_hw_9280_spur_mitigate; + } else { + ah->ath9k_hw_rf_set_freq = &ath9k_hw_set_channel; + ah->ath9k_hw_spur_mitigate_freq = &ath9k_hw_spur_mitigate; + } ath9k_hw_init_mode_regs(ah); @@ -1037,6 +1035,22 @@ static void ath9k_hw_init_qos(struct ath_hw *ah) REG_WRITE(ah, AR_TXOP_12_15, 0xFFFFFFFF); } +static void ath9k_hw_change_target_baud(struct ath_hw *ah, u32 freq, u32 baud) +{ + u32 lcr; + u32 baud_divider = freq * 1000 * 1000 / 16 / baud; + + lcr = REG_READ(ah , 0x5100c); + lcr |= 0x80; + + REG_WRITE(ah, 0x5100c, lcr); + REG_WRITE(ah, 0x51004, (baud_divider >> 8)); + REG_WRITE(ah, 0x51000, (baud_divider & 0xff)); + + lcr &= ~0x80; + REG_WRITE(ah, 0x5100c, lcr); +} + static void ath9k_hw_init_pll(struct ath_hw *ah, struct ath9k_channel *chan) { @@ -1100,6 +1114,26 @@ static void ath9k_hw_init_pll(struct ath_hw *ah, } REG_WRITE(ah, AR_RTC_PLL_CONTROL, pll); + /* Switch the core clock for ar9271 to 117Mhz */ + if (AR_SREV_9271(ah)) { + if ((pll == 0x142c) || (pll == 0x2850) ) { + udelay(500); + /* set CLKOBS to output AHB clock */ + REG_WRITE(ah, 0x7020, 0xe); + /* + * 0x304: 117Mhz, ahb_ratio: 1x1 + * 0x306: 40Mhz, ahb_ratio: 1x1 + */ + REG_WRITE(ah, 0x50040, 0x304); + /* + * makes adjustments for the baud dividor to keep the + * targetted baud rate based on the used core clock. + */ + ath9k_hw_change_target_baud(ah, AR9271_CORE_CLOCK, + AR9271_TARGET_BAUD_RATE); + } + } + udelay(RTC_PLL_SETTLE_DELAY); REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_FORCE_DERIVED_CLK); @@ -1252,7 +1286,8 @@ void ath9k_hw_detach(struct ath_hw *ah) ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP); free_hw: - ath9k_hw_rf_free(ah); + if (!AR_SREV_9280_10_OR_LATER(ah)) + ath9k_hw_rf_free_ext_banks(ah); kfree(ah); ah = NULL; } @@ -1274,7 +1309,8 @@ static void ath9k_hw_override_ini(struct ath_hw *ah, * AR9271 1.1 */ if (AR_SREV_9271_10(ah)) { - val = REG_READ(ah, AR_PHY_SPECTRAL_SCAN) | AR_PHY_SPECTRAL_SCAN_ENABLE; + val = REG_READ(ah, AR_PHY_SPECTRAL_SCAN) | + AR_PHY_SPECTRAL_SCAN_ENABLE; REG_WRITE(ah, AR_PHY_SPECTRAL_SCAN, val); } else if (AR_SREV_9271_11(ah)) @@ -1489,7 +1525,11 @@ static int ath9k_hw_process_ini(struct ath_hw *ah, DO_DELAY(regWrites); } - ath9k_hw_write_regs(ah, modesIndex, freqIndex, regWrites); + ath9k_hw_write_regs(ah, freqIndex, regWrites); + + if (AR_SREV_9271_10(ah)) + REG_WRITE_ARRAY(&ah->iniModes_9271_1_0_only, + modesIndex, regWrites); if (AR_SREV_9280_20(ah) && IS_CHAN_A_5MHZ_SPACED(chan)) { REG_WRITE_ARRAY(&ah->iniModesAdditional, modesIndex, @@ -1832,6 +1872,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah, struct ath_common *common = ath9k_hw_common(ah); struct ieee80211_channel *channel = chan->chan; u32 synthDelay, qnum; + int r; for (qnum = 0; qnum < AR_NUM_QCU; qnum++) { if (ath9k_hw_numtxpending(ah, qnum)) { @@ -1852,14 +1893,11 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah, ath9k_hw_set_regs(ah, chan); - if (AR_SREV_9280_10_OR_LATER(ah)) { - ath9k_hw_ar9280_set_channel(ah, chan); - } else { - if (!(ath9k_hw_set_channel(ah, chan))) { - ath_print(common, ATH_DBG_FATAL, - "Failed to set channel\n"); - return false; - } + r = ah->ath9k_hw_rf_set_freq(ah, chan); + if (r) { + ath_print(common, ATH_DBG_FATAL, + "Failed to set channel\n"); + return false; } ah->eep_ops->set_txpower(ah, chan, @@ -1882,10 +1920,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah, if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan)) ath9k_hw_set_delta_slope(ah, chan); - if (AR_SREV_9280_10_OR_LATER(ah)) - ath9k_hw_9280_spur_mitigate(ah, chan); - else - ath9k_hw_spur_mitigate(ah, chan); + ah->ath9k_hw_spur_mitigate_freq(ah, chan); if (!chan->oneTimeCalsDone) chan->oneTimeCalsDone = true; @@ -1893,457 +1928,6 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah, return true; } -static void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan) -{ - int bb_spur = AR_NO_SPUR; - int freq; - int bin, cur_bin; - int bb_spur_off, spur_subchannel_sd; - int spur_freq_sd; - int spur_delta_phase; - int denominator; - int upper, lower, cur_vit_mask; - int tmp, newVal; - int i; - int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, - AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 - }; - int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, - AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 - }; - int inc[4] = { 0, 100, 0, 0 }; - struct chan_centers centers; - - int8_t mask_m[123]; - int8_t mask_p[123]; - int8_t mask_amt; - int tmp_mask; - int cur_bb_spur; - bool is2GHz = IS_CHAN_2GHZ(chan); - - memset(&mask_m, 0, sizeof(int8_t) * 123); - memset(&mask_p, 0, sizeof(int8_t) * 123); - - ath9k_hw_get_channel_centers(ah, chan, ¢ers); - freq = centers.synth_center; - - ah->config.spurmode = SPUR_ENABLE_EEPROM; - for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) { - cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz); - - if (is2GHz) - cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ; - else - cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ; - - if (AR_NO_SPUR == cur_bb_spur) - break; - cur_bb_spur = cur_bb_spur - freq; - - if (IS_CHAN_HT40(chan)) { - if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) && - (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) { - bb_spur = cur_bb_spur; - break; - } - } else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) && - (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) { - bb_spur = cur_bb_spur; - break; - } - } - - if (AR_NO_SPUR == bb_spur) { - REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, - AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); - return; - } else { - REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, - AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); - } - - bin = bb_spur * 320; - - tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0)); - - newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | - AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | - AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | - AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); - REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal); - - newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | - AR_PHY_SPUR_REG_ENABLE_MASK_PPM | - AR_PHY_SPUR_REG_MASK_RATE_SELECT | - AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | - SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); - REG_WRITE(ah, AR_PHY_SPUR_REG, newVal); - - if (IS_CHAN_HT40(chan)) { - if (bb_spur < 0) { - spur_subchannel_sd = 1; - bb_spur_off = bb_spur + 10; - } else { - spur_subchannel_sd = 0; - bb_spur_off = bb_spur - 10; - } - } else { - spur_subchannel_sd = 0; - bb_spur_off = bb_spur; - } - - if (IS_CHAN_HT40(chan)) - spur_delta_phase = - ((bb_spur * 262144) / - 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; - else - spur_delta_phase = - ((bb_spur * 524288) / - 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; - - denominator = IS_CHAN_2GHZ(chan) ? 44 : 40; - spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff; - - newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | - SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | - SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); - REG_WRITE(ah, AR_PHY_TIMING11, newVal); - - newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S; - REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal); - - cur_bin = -6000; - upper = bin + 100; - lower = bin - 100; - - for (i = 0; i < 4; i++) { - int pilot_mask = 0; - int chan_mask = 0; - int bp = 0; - for (bp = 0; bp < 30; bp++) { - if ((cur_bin > lower) && (cur_bin < upper)) { - pilot_mask = pilot_mask | 0x1 << bp; - chan_mask = chan_mask | 0x1 << bp; - } - cur_bin += 100; - } - cur_bin += inc[i]; - REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); - REG_WRITE(ah, chan_mask_reg[i], chan_mask); - } - - cur_vit_mask = 6100; - upper = bin + 120; - lower = bin - 120; - - for (i = 0; i < 123; i++) { - if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { - - /* workaround for gcc bug #37014 */ - volatile int tmp_v = abs(cur_vit_mask - bin); - - if (tmp_v < 75) - mask_amt = 1; - else - mask_amt = 0; - if (cur_vit_mask < 0) - mask_m[abs(cur_vit_mask / 100)] = mask_amt; - else - mask_p[cur_vit_mask / 100] = mask_amt; - } - cur_vit_mask -= 100; - } - - tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) - | (mask_m[48] << 26) | (mask_m[49] << 24) - | (mask_m[50] << 22) | (mask_m[51] << 20) - | (mask_m[52] << 18) | (mask_m[53] << 16) - | (mask_m[54] << 14) | (mask_m[55] << 12) - | (mask_m[56] << 10) | (mask_m[57] << 8) - | (mask_m[58] << 6) | (mask_m[59] << 4) - | (mask_m[60] << 2) | (mask_m[61] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); - REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); - - tmp_mask = (mask_m[31] << 28) - | (mask_m[32] << 26) | (mask_m[33] << 24) - | (mask_m[34] << 22) | (mask_m[35] << 20) - | (mask_m[36] << 18) | (mask_m[37] << 16) - | (mask_m[48] << 14) | (mask_m[39] << 12) - | (mask_m[40] << 10) | (mask_m[41] << 8) - | (mask_m[42] << 6) | (mask_m[43] << 4) - | (mask_m[44] << 2) | (mask_m[45] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); - - tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) - | (mask_m[18] << 26) | (mask_m[18] << 24) - | (mask_m[20] << 22) | (mask_m[20] << 20) - | (mask_m[22] << 18) | (mask_m[22] << 16) - | (mask_m[24] << 14) | (mask_m[24] << 12) - | (mask_m[25] << 10) | (mask_m[26] << 8) - | (mask_m[27] << 6) | (mask_m[28] << 4) - | (mask_m[29] << 2) | (mask_m[30] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); - - tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28) - | (mask_m[2] << 26) | (mask_m[3] << 24) - | (mask_m[4] << 22) | (mask_m[5] << 20) - | (mask_m[6] << 18) | (mask_m[7] << 16) - | (mask_m[8] << 14) | (mask_m[9] << 12) - | (mask_m[10] << 10) | (mask_m[11] << 8) - | (mask_m[12] << 6) | (mask_m[13] << 4) - | (mask_m[14] << 2) | (mask_m[15] << 0); - REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); - - tmp_mask = (mask_p[15] << 28) - | (mask_p[14] << 26) | (mask_p[13] << 24) - | (mask_p[12] << 22) | (mask_p[11] << 20) - | (mask_p[10] << 18) | (mask_p[9] << 16) - | (mask_p[8] << 14) | (mask_p[7] << 12) - | (mask_p[6] << 10) | (mask_p[5] << 8) - | (mask_p[4] << 6) | (mask_p[3] << 4) - | (mask_p[2] << 2) | (mask_p[1] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); - - tmp_mask = (mask_p[30] << 28) - | (mask_p[29] << 26) | (mask_p[28] << 24) - | (mask_p[27] << 22) | (mask_p[26] << 20) - | (mask_p[25] << 18) | (mask_p[24] << 16) - | (mask_p[23] << 14) | (mask_p[22] << 12) - | (mask_p[21] << 10) | (mask_p[20] << 8) - | (mask_p[19] << 6) | (mask_p[18] << 4) - | (mask_p[17] << 2) | (mask_p[16] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); - - tmp_mask = (mask_p[45] << 28) - | (mask_p[44] << 26) | (mask_p[43] << 24) - | (mask_p[42] << 22) | (mask_p[41] << 20) - | (mask_p[40] << 18) | (mask_p[39] << 16) - | (mask_p[38] << 14) | (mask_p[37] << 12) - | (mask_p[36] << 10) | (mask_p[35] << 8) - | (mask_p[34] << 6) | (mask_p[33] << 4) - | (mask_p[32] << 2) | (mask_p[31] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); - - tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) - | (mask_p[59] << 26) | (mask_p[58] << 24) - | (mask_p[57] << 22) | (mask_p[56] << 20) - | (mask_p[55] << 18) | (mask_p[54] << 16) - | (mask_p[53] << 14) | (mask_p[52] << 12) - | (mask_p[51] << 10) | (mask_p[50] << 8) - | (mask_p[49] << 6) | (mask_p[48] << 4) - | (mask_p[47] << 2) | (mask_p[46] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); -} - -static void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan) -{ - int bb_spur = AR_NO_SPUR; - int bin, cur_bin; - int spur_freq_sd; - int spur_delta_phase; - int denominator; - int upper, lower, cur_vit_mask; - int tmp, new; - int i; - int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, - AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 - }; - int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, - AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 - }; - int inc[4] = { 0, 100, 0, 0 }; - - int8_t mask_m[123]; - int8_t mask_p[123]; - int8_t mask_amt; - int tmp_mask; - int cur_bb_spur; - bool is2GHz = IS_CHAN_2GHZ(chan); - - memset(&mask_m, 0, sizeof(int8_t) * 123); - memset(&mask_p, 0, sizeof(int8_t) * 123); - - for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) { - cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz); - if (AR_NO_SPUR == cur_bb_spur) - break; - cur_bb_spur = cur_bb_spur - (chan->channel * 10); - if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) { - bb_spur = cur_bb_spur; - break; - } - } - - if (AR_NO_SPUR == bb_spur) - return; - - bin = bb_spur * 32; - - tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0)); - new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | - AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | - AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | - AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); - - REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), new); - - new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | - AR_PHY_SPUR_REG_ENABLE_MASK_PPM | - AR_PHY_SPUR_REG_MASK_RATE_SELECT | - AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | - SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); - REG_WRITE(ah, AR_PHY_SPUR_REG, new); - - spur_delta_phase = ((bb_spur * 524288) / 100) & - AR_PHY_TIMING11_SPUR_DELTA_PHASE; - - denominator = IS_CHAN_2GHZ(chan) ? 440 : 400; - spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff; - - new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | - SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | - SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); - REG_WRITE(ah, AR_PHY_TIMING11, new); - - cur_bin = -6000; - upper = bin + 100; - lower = bin - 100; - - for (i = 0; i < 4; i++) { - int pilot_mask = 0; - int chan_mask = 0; - int bp = 0; - for (bp = 0; bp < 30; bp++) { - if ((cur_bin > lower) && (cur_bin < upper)) { - pilot_mask = pilot_mask | 0x1 << bp; - chan_mask = chan_mask | 0x1 << bp; - } - cur_bin += 100; - } - cur_bin += inc[i]; - REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); - REG_WRITE(ah, chan_mask_reg[i], chan_mask); - } - - cur_vit_mask = 6100; - upper = bin + 120; - lower = bin - 120; - - for (i = 0; i < 123; i++) { - if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { - - /* workaround for gcc bug #37014 */ - volatile int tmp_v = abs(cur_vit_mask - bin); - - if (tmp_v < 75) - mask_amt = 1; - else - mask_amt = 0; - if (cur_vit_mask < 0) - mask_m[abs(cur_vit_mask / 100)] = mask_amt; - else - mask_p[cur_vit_mask / 100] = mask_amt; - } - cur_vit_mask -= 100; - } - - tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) - | (mask_m[48] << 26) | (mask_m[49] << 24) - | (mask_m[50] << 22) | (mask_m[51] << 20) - | (mask_m[52] << 18) | (mask_m[53] << 16) - | (mask_m[54] << 14) | (mask_m[55] << 12) - | (mask_m[56] << 10) | (mask_m[57] << 8) - | (mask_m[58] << 6) | (mask_m[59] << 4) - | (mask_m[60] << 2) | (mask_m[61] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); - REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); - - tmp_mask = (mask_m[31] << 28) - | (mask_m[32] << 26) | (mask_m[33] << 24) - | (mask_m[34] << 22) | (mask_m[35] << 20) - | (mask_m[36] << 18) | (mask_m[37] << 16) - | (mask_m[48] << 14) | (mask_m[39] << 12) - | (mask_m[40] << 10) | (mask_m[41] << 8) - | (mask_m[42] << 6) | (mask_m[43] << 4) - | (mask_m[44] << 2) | (mask_m[45] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); - - tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) - | (mask_m[18] << 26) | (mask_m[18] << 24) - | (mask_m[20] << 22) | (mask_m[20] << 20) - | (mask_m[22] << 18) | (mask_m[22] << 16) - | (mask_m[24] << 14) | (mask_m[24] << 12) - | (mask_m[25] << 10) | (mask_m[26] << 8) - | (mask_m[27] << 6) | (mask_m[28] << 4) - | (mask_m[29] << 2) | (mask_m[30] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); - - tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28) - | (mask_m[2] << 26) | (mask_m[3] << 24) - | (mask_m[4] << 22) | (mask_m[5] << 20) - | (mask_m[6] << 18) | (mask_m[7] << 16) - | (mask_m[8] << 14) | (mask_m[9] << 12) - | (mask_m[10] << 10) | (mask_m[11] << 8) - | (mask_m[12] << 6) | (mask_m[13] << 4) - | (mask_m[14] << 2) | (mask_m[15] << 0); - REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); - - tmp_mask = (mask_p[15] << 28) - | (mask_p[14] << 26) | (mask_p[13] << 24) - | (mask_p[12] << 22) | (mask_p[11] << 20) - | (mask_p[10] << 18) | (mask_p[9] << 16) - | (mask_p[8] << 14) | (mask_p[7] << 12) - | (mask_p[6] << 10) | (mask_p[5] << 8) - | (mask_p[4] << 6) | (mask_p[3] << 4) - | (mask_p[2] << 2) | (mask_p[1] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); - - tmp_mask = (mask_p[30] << 28) - | (mask_p[29] << 26) | (mask_p[28] << 24) - | (mask_p[27] << 22) | (mask_p[26] << 20) - | (mask_p[25] << 18) | (mask_p[24] << 16) - | (mask_p[23] << 14) | (mask_p[22] << 12) - | (mask_p[21] << 10) | (mask_p[20] << 8) - | (mask_p[19] << 6) | (mask_p[18] << 4) - | (mask_p[17] << 2) | (mask_p[16] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); - - tmp_mask = (mask_p[45] << 28) - | (mask_p[44] << 26) | (mask_p[43] << 24) - | (mask_p[42] << 22) | (mask_p[41] << 20) - | (mask_p[40] << 18) | (mask_p[39] << 16) - | (mask_p[38] << 14) | (mask_p[37] << 12) - | (mask_p[36] << 10) | (mask_p[35] << 8) - | (mask_p[34] << 6) | (mask_p[33] << 4) - | (mask_p[32] << 2) | (mask_p[31] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); - - tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) - | (mask_p[59] << 26) | (mask_p[58] << 24) - | (mask_p[57] << 22) | (mask_p[56] << 20) - | (mask_p[55] << 18) | (mask_p[54] << 16) - | (mask_p[53] << 14) | (mask_p[52] << 12) - | (mask_p[51] << 10) | (mask_p[50] << 8) - | (mask_p[49] << 6) | (mask_p[48] << 4) - | (mask_p[47] << 2) | (mask_p[46] << 0); - REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); - REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); -} - static void ath9k_enable_rfkill(struct ath_hw *ah) { REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, @@ -2469,14 +2053,11 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan)) ath9k_hw_set_delta_slope(ah, chan); - if (AR_SREV_9280_10_OR_LATER(ah)) - ath9k_hw_9280_spur_mitigate(ah, chan); - else - ath9k_hw_spur_mitigate(ah, chan); - + ah->ath9k_hw_spur_mitigate_freq(ah, chan); ah->eep_ops->set_board_values(ah, chan); - ath9k_hw_decrease_chain_power(ah, chan); + if (AR_SREV_5416(ah)) + ath9k_hw_decrease_chain_power(ah, chan); REG_WRITE(ah, AR_STA_ID0, get_unaligned_le32(common->macaddr)); REG_WRITE(ah, AR_STA_ID1, get_unaligned_le16(common->macaddr + 4) @@ -2497,11 +2078,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR); - if (AR_SREV_9280_10_OR_LATER(ah)) - ath9k_hw_ar9280_set_channel(ah, chan); - else - if (!(ath9k_hw_set_channel(ah, chan))) - return -EIO; + r = ah->ath9k_hw_rf_set_freq(ah, chan); + if (r) + return r; for (i = 0; i < AR_NUM_DCU; i++) REG_WRITE(ah, AR_DQCUMASK(i), 1 << i); @@ -4350,3 +3929,89 @@ void ath_gen_timer_isr(struct ath_hw *ah) } } EXPORT_SYMBOL(ath_gen_timer_isr); + +static struct { + u32 version; + const char * name; +} ath_mac_bb_names[] = { + /* Devices with external radios */ + { AR_SREV_VERSION_5416_PCI, "5416" }, + { AR_SREV_VERSION_5416_PCIE, "5418" }, + { AR_SREV_VERSION_9100, "9100" }, + { AR_SREV_VERSION_9160, "9160" }, + /* Single-chip solutions */ + { AR_SREV_VERSION_9280, "9280" }, + { AR_SREV_VERSION_9285, "9285" }, + { AR_SREV_VERSION_9287, "9287" }, + { AR_SREV_VERSION_9271, "9271" }, +}; + +/* For devices with external radios */ +static struct { + u16 version; + const char * name; +} ath_rf_names[] = { + { 0, "5133" }, + { AR_RAD5133_SREV_MAJOR, "5133" }, + { AR_RAD5122_SREV_MAJOR, "5122" }, + { AR_RAD2133_SREV_MAJOR, "2133" }, + { AR_RAD2122_SREV_MAJOR, "2122" } +}; + +/* + * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown. + */ +static const char *ath9k_hw_mac_bb_name(u32 mac_bb_version) +{ + int i; + + for (i=0; i<ARRAY_SIZE(ath_mac_bb_names); i++) { + if (ath_mac_bb_names[i].version == mac_bb_version) { + return ath_mac_bb_names[i].name; + } + } + + return "????"; +} + +/* + * Return the RF name. "????" is returned if the RF is unknown. + * Used for devices with external radios. + */ +static const char *ath9k_hw_rf_name(u16 rf_version) +{ + int i; + + for (i=0; i<ARRAY_SIZE(ath_rf_names); i++) { + if (ath_rf_names[i].version == rf_version) { + return ath_rf_names[i].name; + } + } + + return "????"; +} + +void ath9k_hw_name(struct ath_hw *ah, char *hw_name, size_t len) +{ + int used; + + /* chipsets >= AR9280 are single-chip */ + if (AR_SREV_9280_10_OR_LATER(ah)) { + used = snprintf(hw_name, len, + "Atheros AR%s Rev:%x", + ath9k_hw_mac_bb_name(ah->hw_version.macVersion), + ah->hw_version.macRev); + } + else { + used = snprintf(hw_name, len, + "Atheros AR%s MAC/BB Rev:%x AR%s RF Rev:%x", + ath9k_hw_mac_bb_name(ah->hw_version.macVersion), + ah->hw_version.macRev, + ath9k_hw_rf_name((ah->hw_version.analog5GhzRev & + AR_RADIO_SREV_MAJOR)), + ah->hw_version.phyRev); + } + + hw_name[used] = '\0'; +} +EXPORT_SYMBOL(ath9k_hw_name); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index cdaec526db35..c7b0c4d5f75a 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -148,6 +148,15 @@ enum wireless_mode { ATH9K_MODE_MAX, }; +/** + * ath9k_ant_setting - transmit antenna settings + * + * Configures the antenna setting to use for transmit. + * + * @ATH9K_ANT_VARIABLE: this means transmit on all active antennas + * @ATH9K_ANT_FIXED_A: this means transmit on the first antenna only + * @ATH9K_ANT_FIXED_B: this means transmit on the second antenna only + */ enum ath9k_ant_setting { ATH9K_ANT_VARIABLE = 0, ATH9K_ANT_FIXED_A, @@ -539,7 +548,14 @@ struct ath_hw { DONT_USE_32KHZ, } enable_32kHz_clock; - /* RF */ + /* Callback for radio frequency change */ + int (*ath9k_hw_rf_set_freq)(struct ath_hw *ah, struct ath9k_channel *chan); + + /* Callback for baseband spur frequency */ + void (*ath9k_hw_spur_mitigate_freq)(struct ath_hw *ah, + struct ath9k_channel *chan); + + /* Used to program the radio on non single-chip devices */ u32 *analogBank0Data; u32 *analogBank1Data; u32 *analogBank2Data; @@ -596,6 +612,7 @@ struct ath_hw { struct ar5416IniArray iniModesAdditional; struct ar5416IniArray iniModesRxGain; struct ar5416IniArray iniModesTxGain; + struct ar5416IniArray iniModes_9271_1_0_only; struct ar5416IniArray iniCckfirNormal; struct ar5416IniArray iniCckfirJapan2484; @@ -618,7 +635,6 @@ static inline struct ath_regulatory *ath9k_hw_regulatory(struct ath_hw *ah) const char *ath9k_hw_probe(u16 vendorid, u16 devid); void ath9k_hw_detach(struct ath_hw *ah); int ath9k_hw_init(struct ath_hw *ah); -void ath9k_hw_rf_free(struct ath_hw *ah); int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, bool bChannelChange); void ath9k_hw_fill_cap_info(struct ath_hw *ah); @@ -704,6 +720,8 @@ void ath_gen_timer_free(struct ath_hw *ah, struct ath_gen_timer *timer); void ath_gen_timer_isr(struct ath_hw *hw); u32 ath9k_hw_gettsf32(struct ath_hw *ah); +void ath9k_hw_name(struct ath_hw *ah, char *hw_name, size_t len); + #define ATH_PCIE_CAP_LINK_CTRL 0x70 #define ATH_PCIE_CAP_LINK_L0S 1 #define ATH_PCIE_CAP_LINK_L1 2 diff --git a/drivers/net/wireless/ath/ath9k/initvals.h b/drivers/net/wireless/ath/ath9k/initvals.h index 3ee6658d809b..8a3bf3ab998d 100644 --- a/drivers/net/wireless/ath/ath9k/initvals.h +++ b/drivers/net/wireless/ath/ath9k/initvals.h @@ -6379,8 +6379,8 @@ static const u_int32_t ar9287PciePhy_clkreq_off_L1_9287_1_1[][2] = { }; -/* AR9271 initialization values automaticaly created: 03/23/09 */ -static const u_int32_t ar9271Modes_9271_1_0[][6] = { +/* AR9271 initialization values automaticaly created: 06/04/09 */ +static const u_int32_t ar9271Modes_9271[][6] = { { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 }, { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 }, { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 }, @@ -6390,8 +6390,8 @@ static const u_int32_t ar9271Modes_9271_1_0[][6] = { { 0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440, 0x00006880 }, { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 }, { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 }, - { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e }, - { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 }, + { 0x00009824, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e }, + { 0x00009828, 0x3a020001, 0x3a020001, 0x3a020001, 0x3a020001, 0x3a020001 }, { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e }, { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 }, { 0x00009840, 0x206a012e, 0x206a012e, 0x206a012e, 0x206a012e, 0x206a012e }, @@ -6405,6 +6405,7 @@ static const u_int32_t ar9271Modes_9271_1_0[][6] = { { 0x00009864, 0x0000fe00, 0x0000fe00, 0x0001ce00, 0x0001ce00, 0x0001ce00 }, { 0x00009868, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0 }, { 0x0000986c, 0x06903081, 0x06903081, 0x06903881, 0x06903881, 0x06903881 }, + { 0x00009910, 0x30002310, 0x30002310, 0x30002310, 0x30002310, 0x30002310 }, { 0x00009914, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898, 0x000007d0 }, { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 }, { 0x00009924, 0xd00a8007, 0xd00a8007, 0xd00a800d, 0xd00a800d, 0xd00a800d }, @@ -6415,7 +6416,7 @@ static const u_int32_t ar9271Modes_9271_1_0[][6] = { { 0x000099bc, 0x00000600, 0x00000600, 0x00000c00, 0x00000c00, 0x00000c00 }, { 0x000099c0, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4 }, { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 }, - { 0x000099c8, 0x6af65329, 0x6af65329, 0x6af65329, 0x6af65329, 0x6af65329 }, + { 0x000099c8, 0x6af6532f, 0x6af6532f, 0x6af6532f, 0x6af6532f, 0x6af6532f }, { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 }, { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 }, { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, @@ -6704,7 +6705,7 @@ static const u_int32_t ar9271Modes_9271_1_0[][6] = { { 0x0000a358, 0x7999aa02, 0x7999aa02, 0x7999aa0e, 0x7999aa0e, 0x7999aa0e }, }; -static const u_int32_t ar9271Common_9271_1_0[][2] = { +static const u_int32_t ar9271Common_9271[][2] = { { 0x0000000c, 0x00000000 }, { 0x00000030, 0x00020045 }, { 0x00000034, 0x00000005 }, @@ -6800,7 +6801,7 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = { { 0x0000803c, 0x00000000 }, { 0x00008048, 0x00000000 }, { 0x00008054, 0x00000000 }, - { 0x00008058, 0x02000000 }, + { 0x00008058, 0x00000000 }, { 0x0000805c, 0x000fc78f }, { 0x00008060, 0x0000000f }, { 0x00008064, 0x00000000 }, @@ -6831,7 +6832,7 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = { { 0x00008110, 0x00000168 }, { 0x00008118, 0x000100aa }, { 0x0000811c, 0x00003210 }, - { 0x00008120, 0x08f04814 }, + { 0x00008120, 0x08f04810 }, { 0x00008124, 0x00000000 }, { 0x00008128, 0x00000000 }, { 0x0000812c, 0x00000000 }, @@ -6878,7 +6879,7 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = { { 0x00008258, 0x00000000 }, { 0x0000825c, 0x400000ff }, { 0x00008260, 0x00080922 }, - { 0x00008264, 0xa8a00010 }, + { 0x00008264, 0x88a00010 }, { 0x00008270, 0x00000000 }, { 0x00008274, 0x40000000 }, { 0x00008278, 0x003e4180 }, @@ -6910,7 +6911,7 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = { { 0x00007814, 0x924934a8 }, { 0x0000781c, 0x00000000 }, { 0x00007820, 0x00000c04 }, - { 0x00007824, 0x00d86bff }, + { 0x00007824, 0x00d8abff }, { 0x00007828, 0x66964300 }, { 0x0000782c, 0x8db6d961 }, { 0x00007830, 0x8db6d96c }, @@ -6944,7 +6945,6 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = { { 0x00009904, 0x00000000 }, { 0x00009908, 0x00000000 }, { 0x0000990c, 0x00000000 }, - { 0x00009910, 0x30002310 }, { 0x0000991c, 0x10000fff }, { 0x00009920, 0x04900000 }, { 0x00009928, 0x00000001 }, @@ -6958,7 +6958,7 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = { { 0x00009954, 0x5f3ca3de }, { 0x00009958, 0x0108ecff }, { 0x00009968, 0x000003ce }, - { 0x00009970, 0x192bb515 }, + { 0x00009970, 0x192bb514 }, { 0x00009974, 0x00000000 }, { 0x00009978, 0x00000001 }, { 0x0000997c, 0x00000000 }, @@ -7045,3 +7045,8 @@ static const u_int32_t ar9271Common_9271_1_0[][2] = { { 0x0000d380, 0x7f3c7bba }, { 0x0000d384, 0xf3307ff0 }, }; + +static const u_int32_t ar9271Modes_9271_1_0_only[][6] = { + { 0x00009910, 0x30002311, 0x30002311, 0x30002311, 0x30002311, 0x30002311 }, + { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 }, +}; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 69cf702b18c2..9fefc51aec17 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -3191,64 +3191,6 @@ struct ieee80211_ops ath9k_ops = { .rfkill_poll = ath9k_rfkill_poll_state, }; -static struct { - u32 version; - const char * name; -} ath_mac_bb_names[] = { - { AR_SREV_VERSION_5416_PCI, "5416" }, - { AR_SREV_VERSION_5416_PCIE, "5418" }, - { AR_SREV_VERSION_9100, "9100" }, - { AR_SREV_VERSION_9160, "9160" }, - { AR_SREV_VERSION_9280, "9280" }, - { AR_SREV_VERSION_9285, "9285" }, - { AR_SREV_VERSION_9287, "9287" } -}; - -static struct { - u16 version; - const char * name; -} ath_rf_names[] = { - { 0, "5133" }, - { AR_RAD5133_SREV_MAJOR, "5133" }, - { AR_RAD5122_SREV_MAJOR, "5122" }, - { AR_RAD2133_SREV_MAJOR, "2133" }, - { AR_RAD2122_SREV_MAJOR, "2122" } -}; - -/* - * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown. - */ -const char * -ath_mac_bb_name(u32 mac_bb_version) -{ - int i; - - for (i=0; i<ARRAY_SIZE(ath_mac_bb_names); i++) { - if (ath_mac_bb_names[i].version == mac_bb_version) { - return ath_mac_bb_names[i].name; - } - } - - return "????"; -} - -/* - * Return the RF name. "????" is returned if the RF is unknown. - */ -const char * -ath_rf_name(u16 rf_version) -{ - int i; - - for (i=0; i<ARRAY_SIZE(ath_rf_names); i++) { - if (ath_rf_names[i].version == rf_version) { - return ath_rf_names[i].name; - } - } - - return "????"; -} - static int __init ath9k_init(void) { int error; diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 63059b6a90da..5321f735e5a0 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -114,6 +114,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) u32 val; int ret = 0; struct ath_hw *ah; + char hw_name[64]; if (pci_enable_device(pdev)) return -EIO; @@ -218,14 +219,11 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) sc->irq = pdev->irq; ah = sc->sc_ah; + ath9k_hw_name(ah, hw_name, sizeof(hw_name)); printk(KERN_INFO - "%s: Atheros AR%s MAC/BB Rev:%x " - "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n", + "%s: %s mem=0x%lx, irq=%d\n", wiphy_name(hw->wiphy), - ath_mac_bb_name(ah->hw_version.macVersion), - ah->hw_version.macRev, - ath_rf_name((ah->hw_version.analog5GhzRev & AR_RADIO_SREV_MAJOR)), - ah->hw_version.phyRev, + hw_name, (unsigned long)mem, pdev->irq); return 0; diff --git a/drivers/net/wireless/ath/ath9k/phy.c b/drivers/net/wireless/ath/ath9k/phy.c index 72a17c43a5a0..13ab4d7eb7aa 100644 --- a/drivers/net/wireless/ath/ath9k/phy.c +++ b/drivers/net/wireless/ath/ath9k/phy.c @@ -14,91 +14,70 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ +/** + * DOC: Programming Atheros 802.11n analog front end radios + * + * AR5416 MAC based PCI devices and AR518 MAC based PCI-Express + * devices have either an external AR2133 analog front end radio for single + * band 2.4 GHz communication or an AR5133 analog front end radio for dual + * band 2.4 GHz / 5 GHz communication. + * + * All devices after the AR5416 and AR5418 family starting with the AR9280 + * have their analog front radios, MAC/BB and host PCIe/USB interface embedded + * into a single-chip and require less programming. + * + * The following single-chips exist with a respective embedded radio: + * + * AR9280 - 11n dual-band 2x2 MIMO for PCIe + * AR9281 - 11n single-band 1x2 MIMO for PCIe + * AR9285 - 11n single-band 1x1 for PCIe + * AR9287 - 11n single-band 2x2 MIMO for PCIe + * + * AR9220 - 11n dual-band 2x2 MIMO for PCI + * AR9223 - 11n single-band 2x2 MIMO for PCI + * + * AR9287 - 11n single-band 1x1 MIMO for USB + */ + #include "hw.h" -void -ath9k_hw_write_regs(struct ath_hw *ah, u32 modesIndex, u32 freqIndex, - int regWrites) +/** + * ath9k_hw_write_regs - ?? + * + * @ah: atheros hardware structure + * @freqIndex: + * @regWrites: + * + * Used for both the chipsets with an external AR2133/AR5133 radios and + * single-chip devices. + */ +void ath9k_hw_write_regs(struct ath_hw *ah, u32 freqIndex, int regWrites) { REG_WRITE_ARRAY(&ah->iniBB_RfGain, freqIndex, regWrites); } -bool -ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) -{ - struct ath_common *common = ath9k_hw_common(ah); - u32 channelSel = 0; - u32 bModeSynth = 0; - u32 aModeRefSel = 0; - u32 reg32 = 0; - u16 freq; - struct chan_centers centers; - - ath9k_hw_get_channel_centers(ah, chan, ¢ers); - freq = centers.synth_center; - - if (freq < 4800) { - u32 txctl; - - if (((freq - 2192) % 5) == 0) { - channelSel = ((freq - 672) * 2 - 3040) / 10; - bModeSynth = 0; - } else if (((freq - 2224) % 5) == 0) { - channelSel = ((freq - 704) * 2 - 3040) / 10; - bModeSynth = 1; - } else { - ath_print(common, ATH_DBG_FATAL, - "Invalid channel %u MHz\n", freq); - return false; - } - - channelSel = (channelSel << 2) & 0xff; - channelSel = ath9k_hw_reverse_bits(channelSel, 8); - - txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL); - if (freq == 2484) { - - REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, - txctl | AR_PHY_CCK_TX_CTRL_JAPAN); - } else { - REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, - txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN); - } - - } else if ((freq % 20) == 0 && freq >= 5120) { - channelSel = - ath9k_hw_reverse_bits(((freq - 4800) / 20 << 2), 8); - aModeRefSel = ath9k_hw_reverse_bits(1, 2); - } else if ((freq % 10) == 0) { - channelSel = - ath9k_hw_reverse_bits(((freq - 4800) / 10 << 1), 8); - if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) - aModeRefSel = ath9k_hw_reverse_bits(2, 2); - else - aModeRefSel = ath9k_hw_reverse_bits(1, 2); - } else if ((freq % 5) == 0) { - channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8); - aModeRefSel = ath9k_hw_reverse_bits(1, 2); - } else { - ath_print(common, ATH_DBG_FATAL, - "Invalid channel %u MHz\n", freq); - return false; - } - - reg32 = - (channelSel << 8) | (aModeRefSel << 2) | (bModeSynth << 1) | - (1 << 5) | 0x1; - - REG_WRITE(ah, AR_PHY(0x37), reg32); - - ah->curchan = chan; - ah->curchan_rad_index = -1; - - return true; -} - -void ath9k_hw_ar9280_set_channel(struct ath_hw *ah, - struct ath9k_channel *chan) +/** + * ath9k_hw_ar9280_set_channel - set channel on single-chip device + * @ah: atheros hardware structure + * @chan: + * + * This is the function to change channel on single-chip devices, that is + * all devices after ar9280. + * + * This function takes the channel value in MHz and sets + * hardware channel value. Assumes writes have been enabled to analog bus. + * + * Actual Expression, + * + * For 2GHz channel, + * Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17) + * (freq_ref = 40MHz) + * + * For 5GHz channel, + * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10) + * (freq_ref = 40MHz/(24>>amodeRefSel)) + */ +int ath9k_hw_ar9280_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) { u16 bMode, fracMode, aModeRefSel = 0; u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0; @@ -111,7 +90,7 @@ void ath9k_hw_ar9280_set_channel(struct ath_hw *ah, reg32 = REG_READ(ah, AR_PHY_SYNTH_CONTROL); reg32 &= 0xc0000000; - if (freq < 4800) { + if (freq < 4800) { /* 2 GHz, fractional mode */ u32 txctl; int regWrites = 0; @@ -122,6 +101,7 @@ void ath9k_hw_ar9280_set_channel(struct ath_hw *ah, if (AR_SREV_9287_11_OR_LATER(ah)) { if (freq == 2484) { + /* Enable channel spreading for channel 14 */ REG_WRITE_ARRAY(&ah->iniCckfirJapan2484, 1, regWrites); } else { @@ -155,10 +135,15 @@ void ath9k_hw_ar9280_set_channel(struct ath_hw *ah, case 1: default: aModeRefSel = 0; + /* + * Enable 2G (fractional) mode for channels + * which are 5MHz spaced. + */ fracMode = 1; refDivA = 1; channelSel = (freq * 0x8000) / 15; + /* RefDivA setting */ REG_RMW_FIELD(ah, AR_AN_SYNTH9, AR_AN_SYNTH9_REFDIVA, refDivA); @@ -180,12 +165,284 @@ void ath9k_hw_ar9280_set_channel(struct ath_hw *ah, ah->curchan = chan; ah->curchan_rad_index = -1; + + return 0; +} + +/** + * ath9k_hw_9280_spur_mitigate - convert baseband spur frequency + * @ah: atheros hardware structure + * @chan: + * + * For single-chip solutions. Converts to baseband spur frequency given the + * input channel frequency and compute register settings below. + */ +void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan) +{ + int bb_spur = AR_NO_SPUR; + int freq; + int bin, cur_bin; + int bb_spur_off, spur_subchannel_sd; + int spur_freq_sd; + int spur_delta_phase; + int denominator; + int upper, lower, cur_vit_mask; + int tmp, newVal; + int i; + int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, + AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 + }; + int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, + AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 + }; + int inc[4] = { 0, 100, 0, 0 }; + struct chan_centers centers; + + int8_t mask_m[123]; + int8_t mask_p[123]; + int8_t mask_amt; + int tmp_mask; + int cur_bb_spur; + bool is2GHz = IS_CHAN_2GHZ(chan); + + memset(&mask_m, 0, sizeof(int8_t) * 123); + memset(&mask_p, 0, sizeof(int8_t) * 123); + + ath9k_hw_get_channel_centers(ah, chan, ¢ers); + freq = centers.synth_center; + + ah->config.spurmode = SPUR_ENABLE_EEPROM; + for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) { + cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz); + + if (is2GHz) + cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ; + else + cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ; + + if (AR_NO_SPUR == cur_bb_spur) + break; + cur_bb_spur = cur_bb_spur - freq; + + if (IS_CHAN_HT40(chan)) { + if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) && + (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) { + bb_spur = cur_bb_spur; + break; + } + } else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) && + (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) { + bb_spur = cur_bb_spur; + break; + } + } + + if (AR_NO_SPUR == bb_spur) { + REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, + AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); + return; + } else { + REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, + AR_PHY_FORCE_CLKEN_CCK_MRC_MUX); + } + + bin = bb_spur * 320; + + tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0)); + + newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | + AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | + AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | + AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); + REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal); + + newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | + AR_PHY_SPUR_REG_ENABLE_MASK_PPM | + AR_PHY_SPUR_REG_MASK_RATE_SELECT | + AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | + SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); + REG_WRITE(ah, AR_PHY_SPUR_REG, newVal); + + if (IS_CHAN_HT40(chan)) { + if (bb_spur < 0) { + spur_subchannel_sd = 1; + bb_spur_off = bb_spur + 10; + } else { + spur_subchannel_sd = 0; + bb_spur_off = bb_spur - 10; + } + } else { + spur_subchannel_sd = 0; + bb_spur_off = bb_spur; + } + + if (IS_CHAN_HT40(chan)) + spur_delta_phase = + ((bb_spur * 262144) / + 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; + else + spur_delta_phase = + ((bb_spur * 524288) / + 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE; + + denominator = IS_CHAN_2GHZ(chan) ? 44 : 40; + spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff; + + newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | + SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | + SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); + REG_WRITE(ah, AR_PHY_TIMING11, newVal); + + newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S; + REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal); + + cur_bin = -6000; + upper = bin + 100; + lower = bin - 100; + + for (i = 0; i < 4; i++) { + int pilot_mask = 0; + int chan_mask = 0; + int bp = 0; + for (bp = 0; bp < 30; bp++) { + if ((cur_bin > lower) && (cur_bin < upper)) { + pilot_mask = pilot_mask | 0x1 << bp; + chan_mask = chan_mask | 0x1 << bp; + } + cur_bin += 100; + } + cur_bin += inc[i]; + REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); + REG_WRITE(ah, chan_mask_reg[i], chan_mask); + } + + cur_vit_mask = 6100; + upper = bin + 120; + lower = bin - 120; + + for (i = 0; i < 123; i++) { + if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { + + /* workaround for gcc bug #37014 */ + volatile int tmp_v = abs(cur_vit_mask - bin); + + if (tmp_v < 75) + mask_amt = 1; + else + mask_amt = 0; + if (cur_vit_mask < 0) + mask_m[abs(cur_vit_mask / 100)] = mask_amt; + else + mask_p[cur_vit_mask / 100] = mask_amt; + } + cur_vit_mask -= 100; + } + + tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) + | (mask_m[48] << 26) | (mask_m[49] << 24) + | (mask_m[50] << 22) | (mask_m[51] << 20) + | (mask_m[52] << 18) | (mask_m[53] << 16) + | (mask_m[54] << 14) | (mask_m[55] << 12) + | (mask_m[56] << 10) | (mask_m[57] << 8) + | (mask_m[58] << 6) | (mask_m[59] << 4) + | (mask_m[60] << 2) | (mask_m[61] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); + REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); + + tmp_mask = (mask_m[31] << 28) + | (mask_m[32] << 26) | (mask_m[33] << 24) + | (mask_m[34] << 22) | (mask_m[35] << 20) + | (mask_m[36] << 18) | (mask_m[37] << 16) + | (mask_m[48] << 14) | (mask_m[39] << 12) + | (mask_m[40] << 10) | (mask_m[41] << 8) + | (mask_m[42] << 6) | (mask_m[43] << 4) + | (mask_m[44] << 2) | (mask_m[45] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); + + tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) + | (mask_m[18] << 26) | (mask_m[18] << 24) + | (mask_m[20] << 22) | (mask_m[20] << 20) + | (mask_m[22] << 18) | (mask_m[22] << 16) + | (mask_m[24] << 14) | (mask_m[24] << 12) + | (mask_m[25] << 10) | (mask_m[26] << 8) + | (mask_m[27] << 6) | (mask_m[28] << 4) + | (mask_m[29] << 2) | (mask_m[30] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); + + tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28) + | (mask_m[2] << 26) | (mask_m[3] << 24) + | (mask_m[4] << 22) | (mask_m[5] << 20) + | (mask_m[6] << 18) | (mask_m[7] << 16) + | (mask_m[8] << 14) | (mask_m[9] << 12) + | (mask_m[10] << 10) | (mask_m[11] << 8) + | (mask_m[12] << 6) | (mask_m[13] << 4) + | (mask_m[14] << 2) | (mask_m[15] << 0); + REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); + + tmp_mask = (mask_p[15] << 28) + | (mask_p[14] << 26) | (mask_p[13] << 24) + | (mask_p[12] << 22) | (mask_p[11] << 20) + | (mask_p[10] << 18) | (mask_p[9] << 16) + | (mask_p[8] << 14) | (mask_p[7] << 12) + | (mask_p[6] << 10) | (mask_p[5] << 8) + | (mask_p[4] << 6) | (mask_p[3] << 4) + | (mask_p[2] << 2) | (mask_p[1] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); + + tmp_mask = (mask_p[30] << 28) + | (mask_p[29] << 26) | (mask_p[28] << 24) + | (mask_p[27] << 22) | (mask_p[26] << 20) + | (mask_p[25] << 18) | (mask_p[24] << 16) + | (mask_p[23] << 14) | (mask_p[22] << 12) + | (mask_p[21] << 10) | (mask_p[20] << 8) + | (mask_p[19] << 6) | (mask_p[18] << 4) + | (mask_p[17] << 2) | (mask_p[16] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); + + tmp_mask = (mask_p[45] << 28) + | (mask_p[44] << 26) | (mask_p[43] << 24) + | (mask_p[42] << 22) | (mask_p[41] << 20) + | (mask_p[40] << 18) | (mask_p[39] << 16) + | (mask_p[38] << 14) | (mask_p[37] << 12) + | (mask_p[36] << 10) | (mask_p[35] << 8) + | (mask_p[34] << 6) | (mask_p[33] << 4) + | (mask_p[32] << 2) | (mask_p[31] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); + + tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) + | (mask_p[59] << 26) | (mask_p[58] << 24) + | (mask_p[57] << 22) | (mask_p[56] << 20) + | (mask_p[55] << 18) | (mask_p[54] << 16) + | (mask_p[53] << 14) | (mask_p[52] << 12) + | (mask_p[51] << 10) | (mask_p[50] << 8) + | (mask_p[49] << 6) | (mask_p[48] << 4) + | (mask_p[47] << 2) | (mask_p[46] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); } -static void -ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32, - u32 numBits, u32 firstBit, - u32 column) +/* All code below is for non single-chip solutions */ + +/** + * ath9k_phy_modify_rx_buffer() - perform analog swizzling of parameters + * @rfbuf: + * @reg32: + * @numBits: + * @firstBit: + * @column: + * + * Performs analog "swizzling" of parameters into their location. + * Used on external AR2133/AR5133 radios. + */ +static void ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32, + u32 numBits, u32 firstBit, + u32 column) { u32 tmp32, mask, arrayEntry, lastBit; int32_t bitPosition, bitsLeft; @@ -209,26 +466,556 @@ ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32, } } -bool -ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, - u16 modesIndex) +/* + * Fix on 2.4 GHz band for orientation sensitivity issue by increasing + * rf_pwd_icsyndiv. + * + * Theoretical Rules: + * if 2 GHz band + * if forceBiasAuto + * if synth_freq < 2412 + * bias = 0 + * else if 2412 <= synth_freq <= 2422 + * bias = 1 + * else // synth_freq > 2422 + * bias = 2 + * else if forceBias > 0 + * bias = forceBias & 7 + * else + * no change, use value from ini file + * else + * no change, invalid band + * + * 1st Mod: + * 2422 also uses value of 2 + * <approved> + * + * 2nd Mod: + * Less than 2412 uses value of 0, 2412 and above uses value of 2 + */ +static void ath9k_hw_force_bias(struct ath_hw *ah, u16 synth_freq) +{ + struct ath_common *common = ath9k_hw_common(ah); + u32 tmp_reg; + int reg_writes = 0; + u32 new_bias = 0; + + if (!AR_SREV_5416(ah) || synth_freq >= 3000) { + return; + } + + BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); + + if (synth_freq < 2412) + new_bias = 0; + else if (synth_freq < 2422) + new_bias = 1; + else + new_bias = 2; + + /* pre-reverse this field */ + tmp_reg = ath9k_hw_reverse_bits(new_bias, 3); + + ath_print(common, ATH_DBG_CONFIG, + "Force rf_pwd_icsyndiv to %1d on %4d\n", + new_bias, synth_freq); + + /* swizzle rf_pwd_icsyndiv */ + ath9k_phy_modify_rx_buffer(ah->analogBank6Data, tmp_reg, 3, 181, 3); + + /* write Bank 6 with new params */ + REG_WRITE_RF_ARRAY(&ah->iniBank6, ah->analogBank6Data, reg_writes); +} + +/** + * ath9k_hw_decrease_chain_power() + * + * @ah: atheros hardware structure + * @chan: + * + * Only used on the AR5416 and AR5418 with the external AR2133/AR5133 radios. + * + * Sets a chain internal RF path to the lowest output power. Any + * further writes to bank6 after this setting will override these + * changes. Thus this function must be the last function in the + * sequence to modify bank 6. + * + * This function must be called after ar5416SetRfRegs() which is + * called from ath9k_hw_process_ini() due to swizzling of bank 6. + * Depends on ah->analogBank6Data being initialized by + * ath9k_hw_set_rf_regs() + * + * Additional additive reduction in power - + * change chain's switch table so chain's tx state is actually the rx + * state value. May produce different results in 2GHz/5GHz as well as + * board to board but in general should be a reduction. + * + * Activated by #ifdef ALTER_SWITCH. Not tried yet. If so, must be + * called after ah->eep_ops->set_board_values() due to RMW of + * PHY_SWITCH_CHAIN_0. + */ +void ath9k_hw_decrease_chain_power(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + int i, regWrites = 0; + u32 bank6SelMask; + u32 *bank6Temp = ah->bank6Temp; + + BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); + + switch (ah->config.diversity_control) { + case ATH9K_ANT_FIXED_A: + bank6SelMask = + (ah->config.antenna_switch_swap & ANTSWAP_AB) ? + REDUCE_CHAIN_0 : /* swapped, reduce chain 0 */ + REDUCE_CHAIN_1; /* normal, select chain 1/2 to reduce */ + break; + case ATH9K_ANT_FIXED_B: + bank6SelMask = + (ah->config.antenna_switch_swap & ANTSWAP_AB) ? + REDUCE_CHAIN_1 : /* swapped, reduce chain 1/2 */ + REDUCE_CHAIN_0; /* normal, select chain 0 to reduce */ + break; + case ATH9K_ANT_VARIABLE: + return; /* do not change anything */ + break; + default: + return; /* do not change anything */ + break; + } + + for (i = 0; i < ah->iniBank6.ia_rows; i++) + bank6Temp[i] = ah->analogBank6Data[i]; + + /* Write Bank 5 to switch Bank 6 write to selected chain only */ + REG_WRITE(ah, AR_PHY_BASE + 0xD8, bank6SelMask); + + /* + * Modify Bank6 selected chain to use lowest amplification. + * Modifies the parameters to a value of 1. + * Depends on existing bank 6 values to be cached in + * ah->analogBank6Data + */ + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 189, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 190, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 191, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 192, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 193, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 222, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 245, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 246, 0); + ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 247, 0); + + REG_WRITE_RF_ARRAY(&ah->iniBank6, bank6Temp, regWrites); + + REG_WRITE(ah, AR_PHY_BASE + 0xD8, 0x00000053); +#ifdef ALTER_SWITCH + REG_WRITE(ah, PHY_SWITCH_CHAIN_0, + (REG_READ(ah, PHY_SWITCH_CHAIN_0) & ~0x38) + | ((REG_READ(ah, PHY_SWITCH_CHAIN_0) >> 3) & 0x38)); +#endif +} + +/** + * ath9k_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios + * @ah: atheros hardware stucture + * @chan: + * + * For the external AR2133/AR5133 radios, takes the MHz channel value and set + * the channel value. Assumes writes enabled to analog bus and bank6 register + * cache in ah->analogBank6Data. + */ +int ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) +{ + struct ath_common *common = ath9k_hw_common(ah); + u32 channelSel = 0; + u32 bModeSynth = 0; + u32 aModeRefSel = 0; + u32 reg32 = 0; + u16 freq; + struct chan_centers centers; + + ath9k_hw_get_channel_centers(ah, chan, ¢ers); + freq = centers.synth_center; + + if (freq < 4800) { + u32 txctl; + + if (((freq - 2192) % 5) == 0) { + channelSel = ((freq - 672) * 2 - 3040) / 10; + bModeSynth = 0; + } else if (((freq - 2224) % 5) == 0) { + channelSel = ((freq - 704) * 2 - 3040) / 10; + bModeSynth = 1; + } else { + ath_print(common, ATH_DBG_FATAL, + "Invalid channel %u MHz\n", freq); + return -EINVAL; + } + + channelSel = (channelSel << 2) & 0xff; + channelSel = ath9k_hw_reverse_bits(channelSel, 8); + + txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL); + if (freq == 2484) { + + REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, + txctl | AR_PHY_CCK_TX_CTRL_JAPAN); + } else { + REG_WRITE(ah, AR_PHY_CCK_TX_CTRL, + txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN); + } + + } else if ((freq % 20) == 0 && freq >= 5120) { + channelSel = + ath9k_hw_reverse_bits(((freq - 4800) / 20 << 2), 8); + aModeRefSel = ath9k_hw_reverse_bits(1, 2); + } else if ((freq % 10) == 0) { + channelSel = + ath9k_hw_reverse_bits(((freq - 4800) / 10 << 1), 8); + if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) + aModeRefSel = ath9k_hw_reverse_bits(2, 2); + else + aModeRefSel = ath9k_hw_reverse_bits(1, 2); + } else if ((freq % 5) == 0) { + channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8); + aModeRefSel = ath9k_hw_reverse_bits(1, 2); + } else { + ath_print(common, ATH_DBG_FATAL, + "Invalid channel %u MHz\n", freq); + return -EINVAL; + } + + ath9k_hw_force_bias(ah, freq); + ath9k_hw_decrease_chain_power(ah, chan); + + reg32 = + (channelSel << 8) | (aModeRefSel << 2) | (bModeSynth << 1) | + (1 << 5) | 0x1; + + REG_WRITE(ah, AR_PHY(0x37), reg32); + + ah->curchan = chan; + ah->curchan_rad_index = -1; + + return 0; +} + +/** + * ath9k_hw_spur_mitigate - convert baseband spur frequency for external radios + * @ah: atheros hardware structure + * @chan: + * + * For non single-chip solutions. Converts to baseband spur frequency given the + * input channel frequency and compute register settings below. + */ +void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan) +{ + int bb_spur = AR_NO_SPUR; + int bin, cur_bin; + int spur_freq_sd; + int spur_delta_phase; + int denominator; + int upper, lower, cur_vit_mask; + int tmp, new; + int i; + int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8, + AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 + }; + int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10, + AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 + }; + int inc[4] = { 0, 100, 0, 0 }; + + int8_t mask_m[123]; + int8_t mask_p[123]; + int8_t mask_amt; + int tmp_mask; + int cur_bb_spur; + bool is2GHz = IS_CHAN_2GHZ(chan); + + memset(&mask_m, 0, sizeof(int8_t) * 123); + memset(&mask_p, 0, sizeof(int8_t) * 123); + + for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) { + cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz); + if (AR_NO_SPUR == cur_bb_spur) + break; + cur_bb_spur = cur_bb_spur - (chan->channel * 10); + if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) { + bb_spur = cur_bb_spur; + break; + } + } + + if (AR_NO_SPUR == bb_spur) + return; + + bin = bb_spur * 32; + + tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0)); + new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI | + AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER | + AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK | + AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK); + + REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), new); + + new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL | + AR_PHY_SPUR_REG_ENABLE_MASK_PPM | + AR_PHY_SPUR_REG_MASK_RATE_SELECT | + AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI | + SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH)); + REG_WRITE(ah, AR_PHY_SPUR_REG, new); + + spur_delta_phase = ((bb_spur * 524288) / 100) & + AR_PHY_TIMING11_SPUR_DELTA_PHASE; + + denominator = IS_CHAN_2GHZ(chan) ? 440 : 400; + spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff; + + new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC | + SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) | + SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE)); + REG_WRITE(ah, AR_PHY_TIMING11, new); + + cur_bin = -6000; + upper = bin + 100; + lower = bin - 100; + + for (i = 0; i < 4; i++) { + int pilot_mask = 0; + int chan_mask = 0; + int bp = 0; + for (bp = 0; bp < 30; bp++) { + if ((cur_bin > lower) && (cur_bin < upper)) { + pilot_mask = pilot_mask | 0x1 << bp; + chan_mask = chan_mask | 0x1 << bp; + } + cur_bin += 100; + } + cur_bin += inc[i]; + REG_WRITE(ah, pilot_mask_reg[i], pilot_mask); + REG_WRITE(ah, chan_mask_reg[i], chan_mask); + } + + cur_vit_mask = 6100; + upper = bin + 120; + lower = bin - 120; + + for (i = 0; i < 123; i++) { + if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) { + + /* workaround for gcc bug #37014 */ + volatile int tmp_v = abs(cur_vit_mask - bin); + + if (tmp_v < 75) + mask_amt = 1; + else + mask_amt = 0; + if (cur_vit_mask < 0) + mask_m[abs(cur_vit_mask / 100)] = mask_amt; + else + mask_p[cur_vit_mask / 100] = mask_amt; + } + cur_vit_mask -= 100; + } + + tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28) + | (mask_m[48] << 26) | (mask_m[49] << 24) + | (mask_m[50] << 22) | (mask_m[51] << 20) + | (mask_m[52] << 18) | (mask_m[53] << 16) + | (mask_m[54] << 14) | (mask_m[55] << 12) + | (mask_m[56] << 10) | (mask_m[57] << 8) + | (mask_m[58] << 6) | (mask_m[59] << 4) + | (mask_m[60] << 2) | (mask_m[61] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask); + REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask); + + tmp_mask = (mask_m[31] << 28) + | (mask_m[32] << 26) | (mask_m[33] << 24) + | (mask_m[34] << 22) | (mask_m[35] << 20) + | (mask_m[36] << 18) | (mask_m[37] << 16) + | (mask_m[48] << 14) | (mask_m[39] << 12) + | (mask_m[40] << 10) | (mask_m[41] << 8) + | (mask_m[42] << 6) | (mask_m[43] << 4) + | (mask_m[44] << 2) | (mask_m[45] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask); + + tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28) + | (mask_m[18] << 26) | (mask_m[18] << 24) + | (mask_m[20] << 22) | (mask_m[20] << 20) + | (mask_m[22] << 18) | (mask_m[22] << 16) + | (mask_m[24] << 14) | (mask_m[24] << 12) + | (mask_m[25] << 10) | (mask_m[26] << 8) + | (mask_m[27] << 6) | (mask_m[28] << 4) + | (mask_m[29] << 2) | (mask_m[30] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask); + + tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28) + | (mask_m[2] << 26) | (mask_m[3] << 24) + | (mask_m[4] << 22) | (mask_m[5] << 20) + | (mask_m[6] << 18) | (mask_m[7] << 16) + | (mask_m[8] << 14) | (mask_m[9] << 12) + | (mask_m[10] << 10) | (mask_m[11] << 8) + | (mask_m[12] << 6) | (mask_m[13] << 4) + | (mask_m[14] << 2) | (mask_m[15] << 0); + REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask); + + tmp_mask = (mask_p[15] << 28) + | (mask_p[14] << 26) | (mask_p[13] << 24) + | (mask_p[12] << 22) | (mask_p[11] << 20) + | (mask_p[10] << 18) | (mask_p[9] << 16) + | (mask_p[8] << 14) | (mask_p[7] << 12) + | (mask_p[6] << 10) | (mask_p[5] << 8) + | (mask_p[4] << 6) | (mask_p[3] << 4) + | (mask_p[2] << 2) | (mask_p[1] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask); + + tmp_mask = (mask_p[30] << 28) + | (mask_p[29] << 26) | (mask_p[28] << 24) + | (mask_p[27] << 22) | (mask_p[26] << 20) + | (mask_p[25] << 18) | (mask_p[24] << 16) + | (mask_p[23] << 14) | (mask_p[22] << 12) + | (mask_p[21] << 10) | (mask_p[20] << 8) + | (mask_p[19] << 6) | (mask_p[18] << 4) + | (mask_p[17] << 2) | (mask_p[16] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask); + + tmp_mask = (mask_p[45] << 28) + | (mask_p[44] << 26) | (mask_p[43] << 24) + | (mask_p[42] << 22) | (mask_p[41] << 20) + | (mask_p[40] << 18) | (mask_p[39] << 16) + | (mask_p[38] << 14) | (mask_p[37] << 12) + | (mask_p[36] << 10) | (mask_p[35] << 8) + | (mask_p[34] << 6) | (mask_p[33] << 4) + | (mask_p[32] << 2) | (mask_p[31] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask); + + tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28) + | (mask_p[59] << 26) | (mask_p[58] << 24) + | (mask_p[57] << 22) | (mask_p[56] << 20) + | (mask_p[55] << 18) | (mask_p[54] << 16) + | (mask_p[53] << 14) | (mask_p[52] << 12) + | (mask_p[51] << 10) | (mask_p[50] << 8) + | (mask_p[49] << 6) | (mask_p[48] << 4) + | (mask_p[47] << 2) | (mask_p[46] << 0); + REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask); + REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask); +} + +/** + * ath9k_hw_rf_alloc_ext_banks - allocates banks for external radio programming + * @ah: atheros hardware structure + * + * Only required for older devices with external AR2133/AR5133 radios. + */ +int ath9k_hw_rf_alloc_ext_banks(struct ath_hw *ah) +{ +#define ATH_ALLOC_BANK(bank, size) do { \ + bank = kzalloc((sizeof(u32) * size), GFP_KERNEL); \ + if (!bank) { \ + ath_print(common, ATH_DBG_FATAL, \ + "Cannot allocate RF banks\n"); \ + return -ENOMEM; \ + } \ + } while (0); + + struct ath_common *common = ath9k_hw_common(ah); + + BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); + + ATH_ALLOC_BANK(ah->analogBank0Data, ah->iniBank0.ia_rows); + ATH_ALLOC_BANK(ah->analogBank1Data, ah->iniBank1.ia_rows); + ATH_ALLOC_BANK(ah->analogBank2Data, ah->iniBank2.ia_rows); + ATH_ALLOC_BANK(ah->analogBank3Data, ah->iniBank3.ia_rows); + ATH_ALLOC_BANK(ah->analogBank6Data, ah->iniBank6.ia_rows); + ATH_ALLOC_BANK(ah->analogBank6TPCData, ah->iniBank6TPC.ia_rows); + ATH_ALLOC_BANK(ah->analogBank7Data, ah->iniBank7.ia_rows); + ATH_ALLOC_BANK(ah->addac5416_21, + ah->iniAddac.ia_rows * ah->iniAddac.ia_columns); + ATH_ALLOC_BANK(ah->bank6Temp, ah->iniBank6.ia_rows); + + return 0; +#undef ATH_ALLOC_BANK +} + + +/** + * ath9k_hw_rf_free_ext_banks - Free memory for analog bank scratch buffers + * @ah: atheros hardware struture + * For the external AR2133/AR5133 radios banks. + */ +void +ath9k_hw_rf_free_ext_banks(struct ath_hw *ah) +{ +#define ATH_FREE_BANK(bank) do { \ + kfree(bank); \ + bank = NULL; \ + } while (0); + + BUG_ON(AR_SREV_9280_10_OR_LATER(ah)); + + ATH_FREE_BANK(ah->analogBank0Data); + ATH_FREE_BANK(ah->analogBank1Data); + ATH_FREE_BANK(ah->analogBank2Data); + ATH_FREE_BANK(ah->analogBank3Data); + ATH_FREE_BANK(ah->analogBank6Data); + ATH_FREE_BANK(ah->analogBank6TPCData); + ATH_FREE_BANK(ah->analogBank7Data); + ATH_FREE_BANK(ah->addac5416_21); + ATH_FREE_BANK(ah->bank6Temp); + +#undef ATH_FREE_BANK +} + +/* * + * ath9k_hw_set_rf_regs - programs rf registers based on EEPROM + * @ah: atheros hardware structure + * @chan: + * @modesIndex: + * + * Used for the external AR2133/AR5133 radios. + * + * Reads the EEPROM header info from the device structure and programs + * all rf registers. This routine requires access to the analog + * rf device. This is not required for single-chip devices. + */ +bool ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, + u16 modesIndex) { u32 eepMinorRev; u32 ob5GHz = 0, db5GHz = 0; u32 ob2GHz = 0, db2GHz = 0; int regWrites = 0; + /* + * Software does not need to program bank data + * for single chip devices, that is AR9280 or anything + * after that. + */ if (AR_SREV_9280_10_OR_LATER(ah)) return true; + /* Setup rf parameters */ eepMinorRev = ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV); + /* Setup Bank 0 Write */ RF_BANK_SETUP(ah->analogBank0Data, &ah->iniBank0, 1); + /* Setup Bank 1 Write */ RF_BANK_SETUP(ah->analogBank1Data, &ah->iniBank1, 1); + /* Setup Bank 2 Write */ RF_BANK_SETUP(ah->analogBank2Data, &ah->iniBank2, 1); + /* Setup Bank 6 Write */ RF_BANK_SETUP(ah->analogBank3Data, &ah->iniBank3, modesIndex); { @@ -239,6 +1026,7 @@ ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, } } + /* Only the 5 or 2 GHz OB/DB need to be set for a mode */ if (eepMinorRev >= 2) { if (IS_CHAN_2GHZ(chan)) { ob2GHz = ah->eep_ops->get_eeprom(ah, EEP_OB_2); @@ -257,8 +1045,10 @@ ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, } } + /* Setup Bank 7 Setup */ RF_BANK_SETUP(ah->analogBank7Data, &ah->iniBank7, 1); + /* Write Analog registers */ REG_WRITE_RF_ARRAY(&ah->iniBank0, ah->analogBank0Data, regWrites); REG_WRITE_RF_ARRAY(&ah->iniBank1, ah->analogBank1Data, @@ -274,139 +1064,3 @@ ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, return true; } - -void -ath9k_hw_rf_free(struct ath_hw *ah) -{ -#define ATH_FREE_BANK(bank) do { \ - kfree(bank); \ - bank = NULL; \ - } while (0); - - ATH_FREE_BANK(ah->analogBank0Data); - ATH_FREE_BANK(ah->analogBank1Data); - ATH_FREE_BANK(ah->analogBank2Data); - ATH_FREE_BANK(ah->analogBank3Data); - ATH_FREE_BANK(ah->analogBank6Data); - ATH_FREE_BANK(ah->analogBank6TPCData); - ATH_FREE_BANK(ah->analogBank7Data); - ATH_FREE_BANK(ah->addac5416_21); - ATH_FREE_BANK(ah->bank6Temp); -#undef ATH_FREE_BANK -} - -bool ath9k_hw_init_rf(struct ath_hw *ah, int *status) -{ - struct ath_common *common = ath9k_hw_common(ah); - - if (!AR_SREV_9280_10_OR_LATER(ah)) { - ah->analogBank0Data = - kzalloc((sizeof(u32) * - ah->iniBank0.ia_rows), GFP_KERNEL); - ah->analogBank1Data = - kzalloc((sizeof(u32) * - ah->iniBank1.ia_rows), GFP_KERNEL); - ah->analogBank2Data = - kzalloc((sizeof(u32) * - ah->iniBank2.ia_rows), GFP_KERNEL); - ah->analogBank3Data = - kzalloc((sizeof(u32) * - ah->iniBank3.ia_rows), GFP_KERNEL); - ah->analogBank6Data = - kzalloc((sizeof(u32) * - ah->iniBank6.ia_rows), GFP_KERNEL); - ah->analogBank6TPCData = - kzalloc((sizeof(u32) * - ah->iniBank6TPC.ia_rows), GFP_KERNEL); - ah->analogBank7Data = - kzalloc((sizeof(u32) * - ah->iniBank7.ia_rows), GFP_KERNEL); - - if (ah->analogBank0Data == NULL - || ah->analogBank1Data == NULL - || ah->analogBank2Data == NULL - || ah->analogBank3Data == NULL - || ah->analogBank6Data == NULL - || ah->analogBank6TPCData == NULL - || ah->analogBank7Data == NULL) { - ath_print(common, ATH_DBG_FATAL, - "Cannot allocate RF banks\n"); - *status = -ENOMEM; - return false; - } - - ah->addac5416_21 = - kzalloc((sizeof(u32) * - ah->iniAddac.ia_rows * - ah->iniAddac.ia_columns), GFP_KERNEL); - if (ah->addac5416_21 == NULL) { - ath_print(common, ATH_DBG_FATAL, - "Cannot allocate addac5416_21\n"); - *status = -ENOMEM; - return false; - } - - ah->bank6Temp = - kzalloc((sizeof(u32) * - ah->iniBank6.ia_rows), GFP_KERNEL); - if (ah->bank6Temp == NULL) { - ath_print(common, ATH_DBG_FATAL, - "Cannot allocate bank6Temp\n"); - *status = -ENOMEM; - return false; - } - } - - return true; -} - -void -ath9k_hw_decrease_chain_power(struct ath_hw *ah, struct ath9k_channel *chan) -{ - int i, regWrites = 0; - u32 bank6SelMask; - u32 *bank6Temp = ah->bank6Temp; - - switch (ah->config.diversity_control) { - case ATH9K_ANT_FIXED_A: - bank6SelMask = - (ah->config.antenna_switch_swap & ANTSWAP_AB) ? - REDUCE_CHAIN_0 : REDUCE_CHAIN_1; - break; - case ATH9K_ANT_FIXED_B: - bank6SelMask = - (ah->config.antenna_switch_swap & ANTSWAP_AB) ? - REDUCE_CHAIN_1 : REDUCE_CHAIN_0; - break; - case ATH9K_ANT_VARIABLE: - return; - break; - default: - return; - break; - } - - for (i = 0; i < ah->iniBank6.ia_rows; i++) - bank6Temp[i] = ah->analogBank6Data[i]; - - REG_WRITE(ah, AR_PHY_BASE + 0xD8, bank6SelMask); - - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 189, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 190, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 191, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 192, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 193, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 222, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 245, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 246, 0); - ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 247, 0); - - REG_WRITE_RF_ARRAY(&ah->iniBank6, bank6Temp, regWrites); - - REG_WRITE(ah, AR_PHY_BASE + 0xD8, 0x00000053); -#ifdef ALTER_SWITCH - REG_WRITE(ah, PHY_SWITCH_CHAIN_0, - (REG_READ(ah, PHY_SWITCH_CHAIN_0) & ~0x38) - | ((REG_READ(ah, PHY_SWITCH_CHAIN_0) >> 3) & 0x38)); -#endif -} diff --git a/drivers/net/wireless/ath/ath9k/phy.h b/drivers/net/wireless/ath/ath9k/phy.h index 140fef74c666..dc145a135dc7 100644 --- a/drivers/net/wireless/ath/ath9k/phy.h +++ b/drivers/net/wireless/ath/ath9k/phy.h @@ -17,20 +17,26 @@ #ifndef PHY_H #define PHY_H -void ath9k_hw_ar9280_set_channel(struct ath_hw *ah, - struct ath9k_channel - *chan); -bool ath9k_hw_set_channel(struct ath_hw *ah, - struct ath9k_channel *chan); -void ath9k_hw_write_regs(struct ath_hw *ah, u32 modesIndex, - u32 freqIndex, int regWrites); +/* Common between single chip and non single-chip solutions */ +void ath9k_hw_write_regs(struct ath_hw *ah, u32 freqIndex, int regWrites); + +/* Single chip radio settings */ +int ath9k_hw_ar9280_set_channel(struct ath_hw *ah, struct ath9k_channel *chan); +void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan); + +/* Routines below are for non single-chip solutions */ +int ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan); +void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan); + +int ath9k_hw_rf_alloc_ext_banks(struct ath_hw *ah); +void ath9k_hw_rf_free_ext_banks(struct ath_hw *ah); + bool ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, u16 modesIndex); + void ath9k_hw_decrease_chain_power(struct ath_hw *ah, struct ath9k_channel *chan); -bool ath9k_hw_init_rf(struct ath_hw *ah, - int *status); #define AR_PHY_BASE 0x9800 #define AR_PHY(_n) (AR_PHY_BASE + ((_n)<<2)) @@ -186,8 +192,20 @@ bool ath9k_hw_init_rf(struct ath_hw *ah, #define AR_PHY_PLL_CTL_44_2133 0xeb #define AR_PHY_PLL_CTL_40_2133 0xea -#define AR_PHY_SPECTRAL_SCAN 0x9912 -#define AR_PHY_SPECTRAL_SCAN_ENABLE 0x1 +#define AR_PHY_SPECTRAL_SCAN 0x9910 /* AR9280 spectral scan configuration register */ +#define AR_PHY_SPECTRAL_SCAN_ENABLE 0x1 +#define AR_PHY_SPECTRAL_SCAN_ENA 0x00000001 /* Enable spectral scan, reg 68, bit 0 */ +#define AR_PHY_SPECTRAL_SCAN_ENA_S 0 /* Enable spectral scan, reg 68, bit 0 */ +#define AR_PHY_SPECTRAL_SCAN_ACTIVE 0x00000002 /* Activate spectral scan reg 68, bit 1*/ +#define AR_PHY_SPECTRAL_SCAN_ACTIVE_S 1 /* Activate spectral scan reg 68, bit 1*/ +#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD 0x000000F0 /* Interval for FFT reports, reg 68, bits 4-7*/ +#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD_S 4 +#define AR_PHY_SPECTRAL_SCAN_PERIOD 0x0000FF00 /* Interval for FFT reports, reg 68, bits 8-15*/ +#define AR_PHY_SPECTRAL_SCAN_PERIOD_S 8 +#define AR_PHY_SPECTRAL_SCAN_COUNT 0x00FF0000 /* Number of reports, reg 68, bits 16-23*/ +#define AR_PHY_SPECTRAL_SCAN_COUNT_S 16 +#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT 0x01000000 /* Short repeat, reg 68, bit 24*/ +#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT_S 24 /* Short repeat, reg 68, bit 24*/ #define AR_PHY_RX_DELAY 0x9914 #define AR_PHY_SEARCH_START_DELAY 0x9918 diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index c880a55939bf..355dd1834e1d 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -202,7 +202,8 @@ static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds, } rcu_read_lock(); - sta = ieee80211_find_sta(sc->hw, hdr->addr2); + /* XXX: use ieee80211_find_sta! */ + sta = ieee80211_find_sta_by_hw(sc->hw, hdr->addr2); if (sta) { an = (struct ath_node *) sta->drv_priv; if (ds->ds_rxstat.rs_rssi != ATH9K_RSSI_BAD && diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index ceed0095efac..061e12ce0b24 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -1704,4 +1704,7 @@ enum { #define AR_KEYTABLE_MAC0(_n) (AR_KEYTABLE(_n) + 24) #define AR_KEYTABLE_MAC1(_n) (AR_KEYTABLE(_n) + 28) +#define AR9271_CORE_CLOCK 117 /* clock to 117Mhz */ +#define AR9271_TARGET_BAUD_RATE 19200 /* 115200 */ + #endif diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 2a4efcbced60..8e052f406c35 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -282,7 +282,8 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, rcu_read_lock(); - sta = ieee80211_find_sta(sc->hw, hdr->addr1); + /* XXX: use ieee80211_find_sta! */ + sta = ieee80211_find_sta_by_hw(sc->hw, hdr->addr1); if (!sta) { rcu_read_unlock(); return; diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 54ea61c15d8b..64c12e1bced3 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -1,6 +1,6 @@ config B43 tristate "Broadcom 43xx wireless support (mac80211 stack)" - depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA + depends on SSB_POSSIBLE && MAC80211 && HAS_DMA select SSB select FW_LOADER ---help--- diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 65b23f725a04..fe3bf9491997 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -26,8 +26,6 @@ # define B43_DEBUG 0 #endif -#define B43_RX_MAX_SSI 60 - /* MMIO offsets */ #define B43_MMIO_DMA0_REASON 0x20 #define B43_MMIO_DMA0_IRQ_MASK 0x24 diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index ed6e96a34743..c806924c7b5c 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3573,7 +3573,7 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed) if (conf->channel->hw_value != phy->channel) b43_switch_channel(dev, conf->channel->hw_value); - dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP); + dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR); /* Adjust the desired TX power level. */ if (conf->power_level != 0) { diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c index c6987b147af4..3e046ec1ff86 100644 --- a/drivers/net/wireless/b43/phy_lp.c +++ b/drivers/net/wireless/b43/phy_lp.c @@ -67,6 +67,7 @@ static void b43_lpphy_op_prepare_structs(struct b43_wldev *dev) struct b43_phy_lp *lpphy = phy->lp; memset(lpphy, 0, sizeof(*lpphy)); + lpphy->antenna = B43_ANTENNA_DEFAULT; //TODO } @@ -379,8 +380,6 @@ static void lpphy_save_dig_flt_state(struct b43_wldev *dev) } } -/* lpphy_restore_dig_flt_state is unused but kept as a reference */ -#if 0 static void lpphy_restore_dig_flt_state(struct b43_wldev *dev) { static const u16 addr[] = { @@ -401,7 +400,6 @@ static void lpphy_restore_dig_flt_state(struct b43_wldev *dev) for (i = 0; i < ARRAY_SIZE(addr); i++) b43_phy_write(dev, addr[i], lpphy->dig_flt_state[i]); } -#endif static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev) { @@ -754,11 +752,17 @@ static void lpphy_clear_deaf(struct b43_wldev *dev, bool user) } } +static void lpphy_set_trsw_over(struct b43_wldev *dev, bool tx, bool rx) +{ + u16 trsw = (tx << 1) | rx; + b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFC, trsw); + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x3); +} + static void lpphy_disable_crs(struct b43_wldev *dev, bool user) { lpphy_set_deaf(dev, user); - b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFC, 0x1); - b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x3); + lpphy_set_trsw_over(dev, false, true); b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFB); b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x4); b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFF7); @@ -793,6 +797,60 @@ static void lpphy_restore_crs(struct b43_wldev *dev, bool user) struct lpphy_tx_gains { u16 gm, pga, pad, dac; }; +static void lpphy_disable_rx_gain_override(struct b43_wldev *dev) +{ + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFFE); + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFEF); + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFBF); + if (dev->phy.rev >= 2) { + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF); + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFBFF); + b43_phy_mask(dev, B43_PHY_OFDM(0xE5), 0xFFF7); + } + } else { + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFDFF); + } +} + +static void lpphy_enable_rx_gain_override(struct b43_wldev *dev) +{ + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1); + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x10); + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x40); + if (dev->phy.rev >= 2) { + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x100); + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x400); + b43_phy_set(dev, B43_PHY_OFDM(0xE5), 0x8); + } + } else { + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x200); + } +} + +static void lpphy_disable_tx_gain_override(struct b43_wldev *dev) +{ + if (dev->phy.rev < 2) + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF); + else { + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFF7F); + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xBFFF); + } + b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFBF); +} + +static void lpphy_enable_tx_gain_override(struct b43_wldev *dev) +{ + if (dev->phy.rev < 2) + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x100); + else { + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x80); + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x4000); + } + b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 0x40); +} + static struct lpphy_tx_gains lpphy_get_tx_gains(struct b43_wldev *dev) { struct lpphy_tx_gains gains; @@ -822,6 +880,17 @@ static void lpphy_set_dac_gain(struct b43_wldev *dev, u16 dac) b43_phy_maskset(dev, B43_LPPHY_AFE_DAC_CTL, 0xF000, ctl); } +static u16 lpphy_get_pa_gain(struct b43_wldev *dev) +{ + return b43_phy_read(dev, B43_PHY_OFDM(0xFB)) & 0x7F; +} + +static void lpphy_set_pa_gain(struct b43_wldev *dev, u16 gain) +{ + b43_phy_maskset(dev, B43_PHY_OFDM(0xFB), 0xE03F, gain << 6); + b43_phy_maskset(dev, B43_PHY_OFDM(0xFD), 0x80FF, gain << 8); +} + static void lpphy_set_tx_gains(struct b43_wldev *dev, struct lpphy_tx_gains gains) { @@ -832,25 +901,22 @@ static void lpphy_set_tx_gains(struct b43_wldev *dev, b43_phy_maskset(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL, 0xF800, rf_gain); } else { - pa_gain = b43_phy_read(dev, B43_PHY_OFDM(0xFB)) & 0x1FC0; - pa_gain <<= 2; + pa_gain = lpphy_get_pa_gain(dev); b43_phy_write(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL, (gains.pga << 8) | gains.gm); + /* + * SPEC FIXME The spec calls for (pa_gain << 8) here, but that + * conflicts with the spec for set_pa_gain! Vendor driver bug? + */ b43_phy_maskset(dev, B43_PHY_OFDM(0xFB), - 0x8000, gains.pad | pa_gain); + 0x8000, gains.pad | (pa_gain << 6)); b43_phy_write(dev, B43_PHY_OFDM(0xFC), (gains.pga << 8) | gains.gm); b43_phy_maskset(dev, B43_PHY_OFDM(0xFD), - 0x8000, gains.pad | pa_gain); + 0x8000, gains.pad | (pa_gain << 8)); } lpphy_set_dac_gain(dev, gains.dac); - if (dev->phy.rev < 2) { - b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF, 1 << 8); - } else { - b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFF7F, 1 << 7); - b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xBFFF, 1 << 14); - } - b43_phy_maskset(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFBF, 1 << 6); + lpphy_enable_tx_gain_override(dev); } static void lpphy_rev0_1_set_rx_gain(struct b43_wldev *dev, u32 gain) @@ -890,41 +956,6 @@ static void lpphy_rev2plus_set_rx_gain(struct b43_wldev *dev, u32 gain) } } -/* lpphy_disable_rx_gain_override is unused but kept as a reference */ -#if 0 -static void lpphy_disable_rx_gain_override(struct b43_wldev *dev) -{ - b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFFE); - b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFEF); - b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFBF); - if (dev->phy.rev >= 2) { - b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF); - if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { - b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFBFF); - b43_phy_mask(dev, B43_PHY_OFDM(0xE5), 0xFFF7); - } - } else { - b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFDFF); - } -} -#endif - -static void lpphy_enable_rx_gain_override(struct b43_wldev *dev) -{ - b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1); - b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x10); - b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x40); - if (dev->phy.rev >= 2) { - b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x100); - if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { - b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x400); - b43_phy_set(dev, B43_PHY_OFDM(0xE5), 0x8); - } - } else { - b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x200); - } -} - static void lpphy_set_rx_gain(struct b43_wldev *dev, u32 gain) { if (dev->phy.rev < 2) @@ -1009,8 +1040,7 @@ static int lpphy_loopback(struct b43_wldev *dev) memset(&iq_est, 0, sizeof(iq_est)); - b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFC, 0x3); - b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x3); + lpphy_set_trsw_over(dev, true, true); b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 1); b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xFFFE); b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x800); @@ -1132,7 +1162,7 @@ static void lpphy_set_tx_power_control(struct b43_wldev *dev, b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM, 0x8FFF, ((u16)lpphy->tssi_npt << 16)); //TODO Set "TSSI Transmit Count" variable to total transmitted frame count - //TODO Disable TX gain override + lpphy_disable_tx_gain_override(dev); lpphy->tx_pwr_idx_over = -1; } } @@ -1318,15 +1348,73 @@ static void lpphy_calibrate_rc(struct b43_wldev *dev) } } +static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) +{ + if (dev->phy.rev >= 2) + return; // rev2+ doesn't support antenna diversity + + if (B43_WARN_ON(antenna > B43_ANTENNA_AUTO1)) + return; + + b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_ANTDIVHELP); + + b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFD, antenna & 0x2); + b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFE, antenna & 0x1); + + b43_hf_write(dev, b43_hf_read(dev) | B43_HF_ANTDIVHELP); + + dev->phy.lp->antenna = antenna; +} + +static void lpphy_set_tx_iqcc(struct b43_wldev *dev, u16 a, u16 b) +{ + u16 tmp[2]; + + tmp[0] = a; + tmp[1] = b; + b43_lptab_write_bulk(dev, B43_LPTAB16(0, 80), 2, tmp); +} + static void lpphy_set_tx_power_by_index(struct b43_wldev *dev, u8 index) { struct b43_phy_lp *lpphy = dev->phy.lp; + struct lpphy_tx_gains gains; + u32 iq_comp, tx_gain, coeff, rf_power; lpphy->tx_pwr_idx_over = index; + lpphy_read_tx_pctl_mode_from_hardware(dev); if (lpphy->txpctl_mode != B43_LPPHY_TXPCTL_OFF) lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_SW); - - //TODO + if (dev->phy.rev >= 2) { + iq_comp = b43_lptab_read(dev, B43_LPTAB32(7, index + 320)); + tx_gain = b43_lptab_read(dev, B43_LPTAB32(7, index + 192)); + gains.pad = (tx_gain >> 16) & 0xFF; + gains.gm = tx_gain & 0xFF; + gains.pga = (tx_gain >> 8) & 0xFF; + gains.dac = (iq_comp >> 28) & 0xFF; + lpphy_set_tx_gains(dev, gains); + } else { + iq_comp = b43_lptab_read(dev, B43_LPTAB32(10, index + 320)); + tx_gain = b43_lptab_read(dev, B43_LPTAB32(10, index + 192)); + b43_phy_maskset(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL, + 0xF800, (tx_gain >> 4) & 0x7FFF); + lpphy_set_dac_gain(dev, tx_gain & 0x7); + lpphy_set_pa_gain(dev, (tx_gain >> 24) & 0x7F); + } + lpphy_set_bb_mult(dev, (iq_comp >> 20) & 0xFF); + lpphy_set_tx_iqcc(dev, (iq_comp >> 10) & 0x3FF, iq_comp & 0x3FF); + if (dev->phy.rev >= 2) { + coeff = b43_lptab_read(dev, B43_LPTAB32(7, index + 448)); + } else { + coeff = b43_lptab_read(dev, B43_LPTAB32(10, index + 448)); + } + b43_lptab_write(dev, B43_LPTAB16(0, 85), coeff & 0xFFFF); + if (dev->phy.rev >= 2) { + rf_power = b43_lptab_read(dev, B43_LPTAB32(7, index + 576)); + b43_phy_maskset(dev, B43_LPPHY_RF_PWR_OVERRIDE, 0xFF00, + rf_power & 0xFFFF);//SPEC FIXME mask & set != 0 + } + lpphy_enable_tx_gain_override(dev); } static void lpphy_btcoex_override(struct b43_wldev *dev) @@ -1335,58 +1423,45 @@ static void lpphy_btcoex_override(struct b43_wldev *dev) b43_write16(dev, B43_MMIO_BTCOEX_TXCTL, 0xFF); } -static void lpphy_pr41573_workaround(struct b43_wldev *dev) +static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev, + bool blocked) { - struct b43_phy_lp *lpphy = dev->phy.lp; - u32 *saved_tab; - const unsigned int saved_tab_size = 256; - enum b43_lpphy_txpctl_mode txpctl_mode; - s8 tx_pwr_idx_over; - u16 tssi_npt, tssi_idx; - - saved_tab = kcalloc(saved_tab_size, sizeof(saved_tab[0]), GFP_KERNEL); - if (!saved_tab) { - b43err(dev->wl, "PR41573 failed. Out of memory!\n"); - return; - } - - lpphy_read_tx_pctl_mode_from_hardware(dev); - txpctl_mode = lpphy->txpctl_mode; - tx_pwr_idx_over = lpphy->tx_pwr_idx_over; - tssi_npt = lpphy->tssi_npt; - tssi_idx = lpphy->tssi_idx; - - if (dev->phy.rev < 2) { - b43_lptab_read_bulk(dev, B43_LPTAB32(10, 0x140), - saved_tab_size, saved_tab); + //TODO check MAC control register + if (blocked) { + if (dev->phy.rev >= 2) { + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x83FF); + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1F00); + b43_phy_mask(dev, B43_LPPHY_AFE_DDFS, 0x80FF); + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xDFFF); + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x0808); + } else { + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xE0FF); + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1F00); + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFCFF); + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x0018); + } } else { - b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140), - saved_tab_size, saved_tab); + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xE0FF); + if (dev->phy.rev >= 2) + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xF7F7); + else + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFFE7); } - //TODO - - kfree(saved_tab); } -static void lpphy_calibration(struct b43_wldev *dev) +/* This was previously called lpphy_japan_filter */ +static void lpphy_set_analog_filter(struct b43_wldev *dev, int channel) { struct b43_phy_lp *lpphy = dev->phy.lp; - enum b43_lpphy_txpctl_mode saved_pctl_mode; - - b43_mac_suspend(dev); - - lpphy_btcoex_override(dev); - lpphy_read_tx_pctl_mode_from_hardware(dev); - saved_pctl_mode = lpphy->txpctl_mode; - lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF); - //TODO Perform transmit power table I/Q LO calibration - if ((dev->phy.rev == 0) && (saved_pctl_mode != B43_LPPHY_TXPCTL_OFF)) - lpphy_pr41573_workaround(dev); - //TODO If a full calibration has not been performed on this channel yet, perform PAPD TX-power calibration - lpphy_set_tx_power_control(dev, saved_pctl_mode); - //TODO Perform I/Q calibration with a single control value set + u16 tmp = (channel == 14); //SPEC FIXME check japanwidefilter! - b43_mac_enable(dev); + if (dev->phy.rev < 2) { //SPEC FIXME Isn't this rev0/1-specific? + b43_phy_maskset(dev, B43_LPPHY_LP_PHY_CTL, 0xFCFF, tmp << 9); + if ((dev->phy.rev == 1) && (lpphy->rc_cap)) + lpphy_set_rc_cap(dev); + } else { + b43_radio_write(dev, B2063_TX_BB_SP3, 0x3F); + } } static void lpphy_set_tssi_mux(struct b43_wldev *dev, enum tssi_mux_mode mode) @@ -1495,6 +1570,473 @@ static void lpphy_tx_pctl_init(struct b43_wldev *dev) } } +static void lpphy_pr41573_workaround(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + u32 *saved_tab; + const unsigned int saved_tab_size = 256; + enum b43_lpphy_txpctl_mode txpctl_mode; + s8 tx_pwr_idx_over; + u16 tssi_npt, tssi_idx; + + saved_tab = kcalloc(saved_tab_size, sizeof(saved_tab[0]), GFP_KERNEL); + if (!saved_tab) { + b43err(dev->wl, "PR41573 failed. Out of memory!\n"); + return; + } + + lpphy_read_tx_pctl_mode_from_hardware(dev); + txpctl_mode = lpphy->txpctl_mode; + tx_pwr_idx_over = lpphy->tx_pwr_idx_over; + tssi_npt = lpphy->tssi_npt; + tssi_idx = lpphy->tssi_idx; + + if (dev->phy.rev < 2) { + b43_lptab_read_bulk(dev, B43_LPTAB32(10, 0x140), + saved_tab_size, saved_tab); + } else { + b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140), + saved_tab_size, saved_tab); + } + //FIXME PHY reset + lpphy_table_init(dev); //FIXME is table init needed? + lpphy_baseband_init(dev); + lpphy_tx_pctl_init(dev); + b43_lpphy_op_software_rfkill(dev, false); + lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF); + if (dev->phy.rev < 2) { + b43_lptab_write_bulk(dev, B43_LPTAB32(10, 0x140), + saved_tab_size, saved_tab); + } else { + b43_lptab_write_bulk(dev, B43_LPTAB32(7, 0x140), + saved_tab_size, saved_tab); + } + b43_write16(dev, B43_MMIO_CHANNEL, lpphy->channel); + lpphy->tssi_npt = tssi_npt; + lpphy->tssi_idx = tssi_idx; + lpphy_set_analog_filter(dev, lpphy->channel); + if (tx_pwr_idx_over != -1) + lpphy_set_tx_power_by_index(dev, tx_pwr_idx_over); + if (lpphy->rc_cap) + lpphy_set_rc_cap(dev); + b43_lpphy_op_set_rx_antenna(dev, lpphy->antenna); + lpphy_set_tx_power_control(dev, txpctl_mode); + kfree(saved_tab); +} + +struct lpphy_rx_iq_comp { u8 chan; s8 c1, c0; }; + +static const struct lpphy_rx_iq_comp lpphy_5354_iq_table[] = { + { .chan = 1, .c1 = -66, .c0 = 15, }, + { .chan = 2, .c1 = -66, .c0 = 15, }, + { .chan = 3, .c1 = -66, .c0 = 15, }, + { .chan = 4, .c1 = -66, .c0 = 15, }, + { .chan = 5, .c1 = -66, .c0 = 15, }, + { .chan = 6, .c1 = -66, .c0 = 15, }, + { .chan = 7, .c1 = -66, .c0 = 14, }, + { .chan = 8, .c1 = -66, .c0 = 14, }, + { .chan = 9, .c1 = -66, .c0 = 14, }, + { .chan = 10, .c1 = -66, .c0 = 14, }, + { .chan = 11, .c1 = -66, .c0 = 14, }, + { .chan = 12, .c1 = -66, .c0 = 13, }, + { .chan = 13, .c1 = -66, .c0 = 13, }, + { .chan = 14, .c1 = -66, .c0 = 13, }, +}; + +static const struct lpphy_rx_iq_comp lpphy_rev0_1_iq_table[] = { + { .chan = 1, .c1 = -64, .c0 = 13, }, + { .chan = 2, .c1 = -64, .c0 = 13, }, + { .chan = 3, .c1 = -64, .c0 = 13, }, + { .chan = 4, .c1 = -64, .c0 = 13, }, + { .chan = 5, .c1 = -64, .c0 = 12, }, + { .chan = 6, .c1 = -64, .c0 = 12, }, + { .chan = 7, .c1 = -64, .c0 = 12, }, + { .chan = 8, .c1 = -64, .c0 = 12, }, + { .chan = 9, .c1 = -64, .c0 = 12, }, + { .chan = 10, .c1 = -64, .c0 = 11, }, + { .chan = 11, .c1 = -64, .c0 = 11, }, + { .chan = 12, .c1 = -64, .c0 = 11, }, + { .chan = 13, .c1 = -64, .c0 = 11, }, + { .chan = 14, .c1 = -64, .c0 = 10, }, + { .chan = 34, .c1 = -62, .c0 = 24, }, + { .chan = 38, .c1 = -62, .c0 = 24, }, + { .chan = 42, .c1 = -62, .c0 = 24, }, + { .chan = 46, .c1 = -62, .c0 = 23, }, + { .chan = 36, .c1 = -62, .c0 = 24, }, + { .chan = 40, .c1 = -62, .c0 = 24, }, + { .chan = 44, .c1 = -62, .c0 = 23, }, + { .chan = 48, .c1 = -62, .c0 = 23, }, + { .chan = 52, .c1 = -62, .c0 = 23, }, + { .chan = 56, .c1 = -62, .c0 = 22, }, + { .chan = 60, .c1 = -62, .c0 = 22, }, + { .chan = 64, .c1 = -62, .c0 = 22, }, + { .chan = 100, .c1 = -62, .c0 = 16, }, + { .chan = 104, .c1 = -62, .c0 = 16, }, + { .chan = 108, .c1 = -62, .c0 = 15, }, + { .chan = 112, .c1 = -62, .c0 = 14, }, + { .chan = 116, .c1 = -62, .c0 = 14, }, + { .chan = 120, .c1 = -62, .c0 = 13, }, + { .chan = 124, .c1 = -62, .c0 = 12, }, + { .chan = 128, .c1 = -62, .c0 = 12, }, + { .chan = 132, .c1 = -62, .c0 = 12, }, + { .chan = 136, .c1 = -62, .c0 = 11, }, + { .chan = 140, .c1 = -62, .c0 = 10, }, + { .chan = 149, .c1 = -61, .c0 = 9, }, + { .chan = 153, .c1 = -61, .c0 = 9, }, + { .chan = 157, .c1 = -61, .c0 = 9, }, + { .chan = 161, .c1 = -61, .c0 = 8, }, + { .chan = 165, .c1 = -61, .c0 = 8, }, + { .chan = 184, .c1 = -62, .c0 = 25, }, + { .chan = 188, .c1 = -62, .c0 = 25, }, + { .chan = 192, .c1 = -62, .c0 = 25, }, + { .chan = 196, .c1 = -62, .c0 = 25, }, + { .chan = 200, .c1 = -62, .c0 = 25, }, + { .chan = 204, .c1 = -62, .c0 = 25, }, + { .chan = 208, .c1 = -62, .c0 = 25, }, + { .chan = 212, .c1 = -62, .c0 = 25, }, + { .chan = 216, .c1 = -62, .c0 = 26, }, +}; + +static const struct lpphy_rx_iq_comp lpphy_rev2plus_iq_comp = { + .chan = 0, + .c1 = -64, + .c0 = 0, +}; + +static u8 lpphy_nbits(s32 val) +{ + u32 tmp = abs(val); + u8 nbits = 0; + + while (tmp != 0) { + nbits++; + tmp >>= 1; + } + + return nbits; +} + +static int lpphy_calc_rx_iq_comp(struct b43_wldev *dev, u16 samples) +{ + struct lpphy_iq_est iq_est; + u16 c0, c1; + int prod, ipwr, qpwr, prod_msb, q_msb, tmp1, tmp2, tmp3, tmp4, ret; + + c1 = b43_phy_read(dev, B43_LPPHY_RX_COMP_COEFF_S); + c0 = c1 >> 8; + c1 |= 0xFF; + + b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S, 0xFF00, 0x00C0); + b43_phy_mask(dev, B43_LPPHY_RX_COMP_COEFF_S, 0x00FF); + + ret = lpphy_rx_iq_est(dev, samples, 32, &iq_est); + if (!ret) + goto out; + + prod = iq_est.iq_prod; + ipwr = iq_est.i_pwr; + qpwr = iq_est.q_pwr; + + if (ipwr + qpwr < 2) { + ret = 0; + goto out; + } + + prod_msb = lpphy_nbits(prod); + q_msb = lpphy_nbits(qpwr); + tmp1 = prod_msb - 20; + + if (tmp1 >= 0) { + tmp3 = ((prod << (30 - prod_msb)) + (ipwr >> (1 + tmp1))) / + (ipwr >> tmp1); + } else { + tmp3 = ((prod << (30 - prod_msb)) + (ipwr << (-1 - tmp1))) / + (ipwr << -tmp1); + } + + tmp2 = q_msb - 11; + + if (tmp2 >= 0) + tmp4 = (qpwr << (31 - q_msb)) / (ipwr >> tmp2); + else + tmp4 = (qpwr << (31 - q_msb)) / (ipwr << -tmp2); + + tmp4 -= tmp3 * tmp3; + tmp4 = -int_sqrt(tmp4); + + c0 = tmp3 >> 3; + c1 = tmp4 >> 4; + +out: + b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S, 0xFF00, c1); + b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S, 0x00FF, c0 << 8); + return ret; +} + +/* Complex number using 2 32-bit signed integers */ +typedef struct {s32 i, q;} lpphy_c32; + +static lpphy_c32 lpphy_cordic(int theta) +{ + u32 arctg[] = { 2949120, 1740967, 919879, 466945, 234379, 117304, + 58666, 29335, 14668, 7334, 3667, 1833, 917, 458, + 229, 115, 57, 29, }; + int i, tmp, signx = 1, angle = 0; + lpphy_c32 ret = { .i = 39797, .q = 0, }; + + theta = clamp_t(int, theta, -180, 180); + + if (theta > 90) { + theta -= 180; + signx = -1; + } else if (theta < -90) { + theta += 180; + signx = -1; + } + + for (i = 0; i <= 17; i++) { + if (theta > angle) { + tmp = ret.i - (ret.q >> i); + ret.q += ret.i >> i; + ret.i = tmp; + angle += arctg[i]; + } else { + tmp = ret.i + (ret.q >> i); + ret.q -= ret.i >> i; + ret.i = tmp; + angle -= arctg[i]; + } + } + + ret.i *= signx; + ret.q *= signx; + + return ret; +} + +static void lpphy_run_samples(struct b43_wldev *dev, u16 samples, u16 loops, + u16 wait) +{ + b43_phy_maskset(dev, B43_LPPHY_SMPL_PLAY_BUFFER_CTL, + 0xFFC0, samples - 1); + if (loops != 0xFFFF) + loops--; + b43_phy_maskset(dev, B43_LPPHY_SMPL_PLAY_COUNT, 0xF000, loops); + b43_phy_maskset(dev, B43_LPPHY_SMPL_PLAY_BUFFER_CTL, 0x3F, wait << 6); + b43_phy_set(dev, B43_LPPHY_A_PHY_CTL_ADDR, 0x1); +} + +//SPEC FIXME what does a negative freq mean? +static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + u16 buf[64]; + int i, samples = 0, angle = 0, rotation = (9 * freq) / 500; + lpphy_c32 sample; + + lpphy->tx_tone_freq = freq; + + if (freq) { + /* Find i for which abs(freq) integrally divides 20000 * i */ + for (i = 1; samples * abs(freq) != 20000 * i; i++) { + samples = (20000 * i) / abs(freq); + if(B43_WARN_ON(samples > 63)) + return; + } + } else { + samples = 2; + } + + for (i = 0; i < samples; i++) { + sample = lpphy_cordic(angle); + angle += rotation; + buf[i] = ((sample.i * max) & 0xFF) << 8; + buf[i] |= (sample.q * max) & 0xFF; + } + + b43_lptab_write_bulk(dev, B43_LPTAB16(5, 0), samples, buf); + + lpphy_run_samples(dev, samples, 0xFFFF, 0); +} + +static void lpphy_stop_tx_tone(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + int i; + + lpphy->tx_tone_freq = 0; + + b43_phy_mask(dev, B43_LPPHY_SMPL_PLAY_COUNT, 0xF000); + for (i = 0; i < 31; i++) { + if (!(b43_phy_read(dev, B43_LPPHY_A_PHY_CTL_ADDR) & 0x1)) + break; + udelay(100); + } +} + + +static void lpphy_papd_cal(struct b43_wldev *dev, struct lpphy_tx_gains gains, + int mode, bool useindex, u8 index) +{ + //TODO +} + +static void lpphy_papd_cal_txpwr(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + struct ssb_bus *bus = dev->dev->bus; + struct lpphy_tx_gains gains, oldgains; + int old_txpctl, old_afe_ovr, old_rf, old_bbmult; + + lpphy_read_tx_pctl_mode_from_hardware(dev); + old_txpctl = lpphy->txpctl_mode; + old_afe_ovr = b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR) & 0x40; + if (old_afe_ovr) + oldgains = lpphy_get_tx_gains(dev); + old_rf = b43_phy_read(dev, B43_LPPHY_RF_PWR_OVERRIDE) & 0xFF; + old_bbmult = lpphy_get_bb_mult(dev); + + lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF); + + if (bus->chip_id == 0x4325 && bus->chip_rev == 0) + lpphy_papd_cal(dev, gains, 0, 1, 30); + else + lpphy_papd_cal(dev, gains, 0, 1, 65); + + if (old_afe_ovr) + lpphy_set_tx_gains(dev, oldgains); + lpphy_set_bb_mult(dev, old_bbmult); + lpphy_set_tx_power_control(dev, old_txpctl); + b43_phy_maskset(dev, B43_LPPHY_RF_PWR_OVERRIDE, 0xFF00, old_rf); +} + +static int lpphy_rx_iq_cal(struct b43_wldev *dev, bool noise, bool tx, + bool rx, bool pa, struct lpphy_tx_gains *gains) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + struct ssb_bus *bus = dev->dev->bus; + const struct lpphy_rx_iq_comp *iqcomp = NULL; + struct lpphy_tx_gains nogains, oldgains; + u16 tmp; + int i, ret; + + memset(&nogains, 0, sizeof(nogains)); + memset(&oldgains, 0, sizeof(oldgains)); + + if (bus->chip_id == 0x5354) { + for (i = 0; i < ARRAY_SIZE(lpphy_5354_iq_table); i++) { + if (lpphy_5354_iq_table[i].chan == lpphy->channel) { + iqcomp = &lpphy_5354_iq_table[i]; + } + } + } else if (dev->phy.rev >= 2) { + iqcomp = &lpphy_rev2plus_iq_comp; + } else { + for (i = 0; i < ARRAY_SIZE(lpphy_rev0_1_iq_table); i++) { + if (lpphy_rev0_1_iq_table[i].chan == lpphy->channel) { + iqcomp = &lpphy_rev0_1_iq_table[i]; + } + } + } + + if (B43_WARN_ON(!iqcomp)) + return 0; + + b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S, 0xFF00, iqcomp->c1); + b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S, + 0x00FF, iqcomp->c0 << 8); + + if (noise) { + tx = true; + rx = false; + pa = false; + } + + lpphy_set_trsw_over(dev, tx, rx); + + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x8); + b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, + 0xFFF7, pa << 3); + } else { + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x20); + b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, + 0xFFDF, pa << 5); + } + + tmp = b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR) & 0x40; + + if (noise) + lpphy_set_rx_gain(dev, 0x2D5D); + else { + if (tmp) + oldgains = lpphy_get_tx_gains(dev); + if (!gains) + gains = &nogains; + lpphy_set_tx_gains(dev, *gains); + } + + b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFFE); + b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xFFFE); + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x800); + b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x800); + lpphy_set_deaf(dev, false); + if (noise) + ret = lpphy_calc_rx_iq_comp(dev, 0xFFF0); + else { + lpphy_start_tx_tone(dev, 4000, 100); + ret = lpphy_calc_rx_iq_comp(dev, 0x4000); + lpphy_stop_tx_tone(dev); + } + lpphy_clear_deaf(dev, false); + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFFC); + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFF7); + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFDF); + if (!noise) { + if (tmp) + lpphy_set_tx_gains(dev, oldgains); + else + lpphy_disable_tx_gain_override(dev); + } + lpphy_disable_rx_gain_override(dev); + b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFFE); + b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xF7FF); + return ret; +} + +static void lpphy_calibration(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + enum b43_lpphy_txpctl_mode saved_pctl_mode; + bool full_cal = false; + + if (lpphy->full_calib_chan != lpphy->channel) { + full_cal = true; + lpphy->full_calib_chan = lpphy->channel; + } + + b43_mac_suspend(dev); + + lpphy_btcoex_override(dev); + if (dev->phy.rev >= 2) + lpphy_save_dig_flt_state(dev); + lpphy_read_tx_pctl_mode_from_hardware(dev); + saved_pctl_mode = lpphy->txpctl_mode; + lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF); + //TODO Perform transmit power table I/Q LO calibration + if ((dev->phy.rev == 0) && (saved_pctl_mode != B43_LPPHY_TXPCTL_OFF)) + lpphy_pr41573_workaround(dev); + if ((dev->phy.rev >= 2) && full_cal) { + lpphy_papd_cal_txpwr(dev); + } + lpphy_set_tx_power_control(dev, saved_pctl_mode); + if (dev->phy.rev >= 2) + lpphy_restore_dig_flt_state(dev); + lpphy_rx_iq_cal(dev, true, true, false, false, NULL); + + b43_mac_enable(dev); +} + static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg) { b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); @@ -1539,12 +2081,6 @@ static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); } -static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev, - bool blocked) -{ - //TODO -} - struct b206x_channel { u8 channel; u16 freq; @@ -2010,22 +2546,6 @@ static int lpphy_b2062_tune(struct b43_wldev *dev, return err; } - -/* This was previously called lpphy_japan_filter */ -static void lpphy_set_analog_filter(struct b43_wldev *dev, int channel) -{ - struct b43_phy_lp *lpphy = dev->phy.lp; - u16 tmp = (channel == 14); //SPEC FIXME check japanwidefilter! - - if (dev->phy.rev < 2) { //SPEC FIXME Isn't this rev0/1-specific? - b43_phy_maskset(dev, B43_LPPHY_LP_PHY_CTL, 0xFCFF, tmp << 9); - if ((dev->phy.rev == 1) && (lpphy->rc_cap)) - lpphy_set_rc_cap(dev); - } else { - b43_radio_write(dev, B2063_TX_BB_SP3, 0x3F); - } -} - static void lpphy_b2063_vco_calib(struct b43_wldev *dev) { u16 tmp; @@ -2210,18 +2730,6 @@ static int b43_lpphy_op_init(struct b43_wldev *dev) return 0; } -static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) -{ - if (dev->phy.rev >= 2) - return; // rev2+ doesn't support antenna diversity - - if (B43_WARN_ON(antenna > B43_ANTENNA_AUTO1)) - return; - - b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFD, antenna & 0x2); - b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFE, antenna & 0x1); -} - static void b43_lpphy_op_adjust_txpower(struct b43_wldev *dev) { //TODO @@ -2244,6 +2752,11 @@ void b43_lpphy_op_switch_analog(struct b43_wldev *dev, bool on) } } +static void b43_lpphy_op_pwork_15sec(struct b43_wldev *dev) +{ + //TODO +} + const struct b43_phy_operations b43_phyops_lp = { .allocate = b43_lpphy_op_allocate, .free = b43_lpphy_op_free, @@ -2261,4 +2774,6 @@ const struct b43_phy_operations b43_phyops_lp = { .set_rx_antenna = b43_lpphy_op_set_rx_antenna, .recalc_txpower = b43_lpphy_op_recalc_txpower, .adjust_txpower = b43_lpphy_op_adjust_txpower, + .pwork_15sec = b43_lpphy_op_pwork_15sec, + .pwork_60sec = lpphy_calibration, }; diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h index c3232c17b60a..62737f700cbc 100644 --- a/drivers/net/wireless/b43/phy_lp.h +++ b/drivers/net/wireless/b43/phy_lp.h @@ -286,6 +286,7 @@ #define B43_LPPHY_TR_LOOKUP_6 B43_PHY_OFDM(0xC8) /* TR Lookup 6 */ #define B43_LPPHY_TR_LOOKUP_7 B43_PHY_OFDM(0xC9) /* TR Lookup 7 */ #define B43_LPPHY_TR_LOOKUP_8 B43_PHY_OFDM(0xCA) /* TR Lookup 8 */ +#define B43_LPPHY_RF_PWR_OVERRIDE B43_PHY_OFDM(0xD3) /* RF power override */ @@ -871,12 +872,12 @@ struct b43_phy_lp { u8 rssi_gs; /* RC cap */ - u8 rc_cap; /* FIXME initial value? */ + u8 rc_cap; /* BX arch */ u8 bx_arch; /* Full calibration channel */ - u8 full_calib_chan; /* FIXME initial value? */ + u8 full_calib_chan; /* Transmit iqlocal best coeffs */ bool tx_iqloc_best_coeffs_valid; @@ -891,6 +892,12 @@ struct b43_phy_lp { /* The channel we are tuned to */ u8 channel; + + /* The active antenna diversity mode */ + int antenna; + + /* Frequency of the active TX tone */ + int tx_tone_freq; }; enum tssi_mux_mode { diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 7a5e294be2bc..eda06529ef5f 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -621,7 +621,6 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) (phystat0 & B43_RX_PHYST0_OFDM), (phystat0 & B43_RX_PHYST0_GAINCTL), (phystat3 & B43_RX_PHYST3_TRSTATE)); - status.qual = (rxhdr->jssi * 100) / B43_RX_MAX_SSI; } if (phystat0 & B43_RX_PHYST0_OFDM) diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig index 94a463478053..1ffa28835c58 100644 --- a/drivers/net/wireless/b43legacy/Kconfig +++ b/drivers/net/wireless/b43legacy/Kconfig @@ -1,6 +1,6 @@ config B43LEGACY tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)" - depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA + depends on SSB_POSSIBLE && MAC80211 && HAS_DMA select SSB select FW_LOADER ---help--- diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h index 038baa8869e2..89fe2f972c72 100644 --- a/drivers/net/wireless/b43legacy/b43legacy.h +++ b/drivers/net/wireless/b43legacy/b43legacy.h @@ -29,8 +29,6 @@ #define B43legacy_IRQWAIT_MAX_RETRIES 20 -#define B43legacy_RX_MAX_SSI 60 /* best guess at max ssi */ - /* MMIO offsets */ #define B43legacy_MMIO_DMA0_REASON 0x20 #define B43legacy_MMIO_DMA0_IRQ_MASK 0x24 diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c index 866403415811..0a86bdf53154 100644 --- a/drivers/net/wireless/b43legacy/dma.c +++ b/drivers/net/wireless/b43legacy/dma.c @@ -1240,8 +1240,9 @@ struct b43legacy_dmaring *parse_cookie(struct b43legacy_wldev *dev, } static int dma_tx_fragment(struct b43legacy_dmaring *ring, - struct sk_buff *skb) + struct sk_buff **in_skb) { + struct sk_buff *skb = *in_skb; const struct b43legacy_dma_ops *ops = ring->ops; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); u8 *header; @@ -1305,8 +1306,14 @@ static int dma_tx_fragment(struct b43legacy_dmaring *ring, } memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len); + memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb)); + bounce_skb->dev = skb->dev; + skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb)); + info = IEEE80211_SKB_CB(bounce_skb); + dev_kfree_skb_any(skb); skb = bounce_skb; + *in_skb = bounce_skb; meta->skb = skb; meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1); if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) { @@ -1360,8 +1367,10 @@ int b43legacy_dma_tx(struct b43legacy_wldev *dev, struct sk_buff *skb) { struct b43legacy_dmaring *ring; + struct ieee80211_hdr *hdr; int err = 0; unsigned long flags; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); ring = priority_to_txring(dev, skb_get_queue_mapping(skb)); spin_lock_irqsave(&ring->lock, flags); @@ -1386,7 +1395,11 @@ int b43legacy_dma_tx(struct b43legacy_wldev *dev, goto out_unlock; } - err = dma_tx_fragment(ring, skb); + /* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing + * into the skb data or cb now. */ + hdr = NULL; + info = NULL; + err = dma_tx_fragment(ring, &skb); if (unlikely(err == -ENOKEY)) { /* Drop this packet, as we don't have the encryption key * anymore and must not transmit it unencrypted. */ diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 0983406f4630..d579bb9035c4 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2676,7 +2676,7 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw, if (conf->channel->hw_value != phy->channel) b43legacy_radio_selectchannel(dev, conf->channel->hw_value, 0); - dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP); + dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR); /* Adjust the desired TX power level. */ if (conf->power_level != 0) { diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c index 103f3c9e7f58..9c8882d9275e 100644 --- a/drivers/net/wireless/b43legacy/xmit.c +++ b/drivers/net/wireless/b43legacy/xmit.c @@ -549,7 +549,6 @@ void b43legacy_rx(struct b43legacy_wldev *dev, (phystat0 & B43legacy_RX_PHYST0_GAINCTL), (phystat3 & B43legacy_RX_PHYST3_TRSTATE)); status.noise = dev->stats.link_noise; - status.qual = (jssi * 100) / B43legacy_RX_MAX_SSI; /* change to support A PHY */ if (phystat0 & B43legacy_RX_PHYST0_OFDM) status.rate_idx = b43legacy_plcp_get_bitrate_idx_ofdm(plcp, false); diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig index 08f1e989653d..287d82728bc3 100644 --- a/drivers/net/wireless/hostap/Kconfig +++ b/drivers/net/wireless/hostap/Kconfig @@ -1,6 +1,5 @@ config HOSTAP tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)" - depends on WLAN_80211 select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig index 59ec9eec5024..2715b101aded 100644 --- a/drivers/net/wireless/ipw2x00/Kconfig +++ b/drivers/net/wireless/ipw2x00/Kconfig @@ -4,7 +4,7 @@ config IPW2100 tristate "Intel PRO/Wireless 2100 Network Connection" - depends on PCI && WLAN_80211 && CFG80211 + depends on PCI && CFG80211 select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV @@ -65,7 +65,7 @@ config IPW2100_DEBUG config IPW2200 tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" - depends on PCI && WLAN_80211 && CFG80211 && CFG80211_WEXT + depends on PCI && CFG80211 && CFG80211_WEXT select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV @@ -154,7 +154,7 @@ config IPW2200_DEBUG config LIBIPW tristate - depends on PCI && WLAN_80211 && CFG80211 + depends on PCI && CFG80211 select WIRELESS_EXT select WEXT_SPY select CRYPTO diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index c82c97be7bfa..b16b06c2031f 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -1,6 +1,6 @@ config IWLWIFI tristate "Intel Wireless Wifi" - depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL + depends on PCI && MAC80211 && EXPERIMENTAL select FW_LOADER config IWLWIFI_SPECTRUM_MEASUREMENT diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 3a645e485dda..1e387b9dce1e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -164,7 +164,7 @@ struct iwl_cfg iwl1000_bgn_cfg = { .valid_tx_ant = ANT_A, .valid_rx_ant = ANT_AB, .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, - .set_l0s = false, + .set_l0s = true, .use_bsm = false, .max_ll_items = OTP_MAX_LL_ITEMS_1000, .shadow_ram_support = false, @@ -190,7 +190,7 @@ struct iwl_cfg iwl1000_bg_cfg = { .valid_tx_ant = ANT_A, .valid_rx_ant = ANT_AB, .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, - .set_l0s = false, + .set_l0s = true, .use_bsm = false, .max_ll_items = OTP_MAX_LL_ITEMS_1000, .shadow_ram_support = false, diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index cbb0585083a9..dc81e19674f7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -42,38 +42,6 @@ #define RS_NAME "iwl-3945-rs" -struct iwl3945_rate_scale_data { - u64 data; - s32 success_counter; - s32 success_ratio; - s32 counter; - s32 average_tpt; - unsigned long stamp; -}; - -struct iwl3945_rs_sta { - spinlock_t lock; - struct iwl_priv *priv; - s32 *expected_tpt; - unsigned long last_partial_flush; - unsigned long last_flush; - u32 flush_time; - u32 last_tx_packets; - u32 tx_packets; - u8 tgg; - u8 flush_pending; - u8 start_rate; - u8 ibss_sta_added; - struct timer_list rate_scale_flush; - struct iwl3945_rate_scale_data win[IWL_RATE_COUNT_3945]; -#ifdef CONFIG_MAC80211_DEBUGFS - struct dentry *rs_sta_dbgfs_stats_table_file; -#endif - - /* used to be in sta_info */ - int last_txrate_idx; -}; - static s32 iwl3945_expected_tpt_g[IWL_RATE_COUNT_3945] = { 7, 13, 35, 58, 0, 0, 76, 104, 130, 168, 191, 202 }; @@ -370,6 +338,28 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband, IWL_DEBUG_RATE(priv, "enter\n"); + spin_lock_init(&rs_sta->lock); + + rs_sta->priv = priv; + + rs_sta->start_rate = IWL_RATE_INVALID; + + /* default to just 802.11b */ + rs_sta->expected_tpt = iwl3945_expected_tpt_b; + + rs_sta->last_partial_flush = jiffies; + rs_sta->last_flush = jiffies; + rs_sta->flush_time = IWL_RATE_FLUSH; + rs_sta->last_tx_packets = 0; + rs_sta->ibss_sta_added = 0; + + init_timer(&rs_sta->rate_scale_flush); + rs_sta->rate_scale_flush.data = (unsigned long)rs_sta; + rs_sta->rate_scale_flush.function = &iwl3945_bg_rate_scale_flush; + + for (i = 0; i < IWL_RATE_COUNT_3945; i++) + iwl3945_clear_window(&rs_sta->win[i]); + /* TODO: what is a good starting rate for STA? About middle? Maybe not * the lowest or the highest rate.. Could consider using RSSI from * previous packets? Need to have IEEE 802.1X auth succeed immediately @@ -409,45 +399,11 @@ static void *rs_alloc_sta(void *iwl_priv, struct ieee80211_sta *sta, gfp_t gfp) { struct iwl3945_rs_sta *rs_sta; struct iwl3945_sta_priv *psta = (void *) sta->drv_priv; - struct iwl_priv *priv = iwl_priv; - int i; - - /* - * XXX: If it's using sta->drv_priv anyway, it might - * as well just put all the information there. - */ + struct iwl_priv *priv __maybe_unused = iwl_priv; IWL_DEBUG_RATE(priv, "enter\n"); - rs_sta = kzalloc(sizeof(struct iwl3945_rs_sta), gfp); - if (!rs_sta) { - IWL_DEBUG_RATE(priv, "leave: ENOMEM\n"); - return NULL; - } - - psta->rs_sta = rs_sta; - - spin_lock_init(&rs_sta->lock); - - rs_sta->priv = priv; - - rs_sta->start_rate = IWL_RATE_INVALID; - - /* default to just 802.11b */ - rs_sta->expected_tpt = iwl3945_expected_tpt_b; - - rs_sta->last_partial_flush = jiffies; - rs_sta->last_flush = jiffies; - rs_sta->flush_time = IWL_RATE_FLUSH; - rs_sta->last_tx_packets = 0; - rs_sta->ibss_sta_added = 0; - - init_timer(&rs_sta->rate_scale_flush); - rs_sta->rate_scale_flush.data = (unsigned long)rs_sta; - rs_sta->rate_scale_flush.function = &iwl3945_bg_rate_scale_flush; - - for (i = 0; i < IWL_RATE_COUNT_3945; i++) - iwl3945_clear_window(&rs_sta->win[i]); + rs_sta = &psta->rs_sta; IWL_DEBUG_RATE(priv, "leave\n"); @@ -458,14 +414,11 @@ static void rs_free_sta(void *iwl_priv, struct ieee80211_sta *sta, void *priv_sta) { struct iwl3945_sta_priv *psta = (void *) sta->drv_priv; - struct iwl3945_rs_sta *rs_sta = priv_sta; + struct iwl3945_rs_sta *rs_sta = &psta->rs_sta; struct iwl_priv *priv __maybe_unused = rs_sta->priv; - psta->rs_sta = NULL; - IWL_DEBUG_RATE(priv, "enter\n"); del_timer_sync(&rs_sta->rate_scale_flush); - kfree(rs_sta); IWL_DEBUG_RATE(priv, "leave\n"); } @@ -960,14 +913,15 @@ void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id) rcu_read_lock(); - sta = ieee80211_find_sta(hw, priv->stations[sta_id].sta.sta.addr); + sta = ieee80211_find_sta(priv->vif, + priv->stations[sta_id].sta.sta.addr); if (!sta) { rcu_read_unlock(); return; } psta = (void *) sta->drv_priv; - rs_sta = psta->rs_sta; + rs_sta = &psta->rs_sta; spin_lock_irqsave(&rs_sta->lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index ebb999a51b58..2b0d65c5780a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -74,8 +74,41 @@ extern struct pci_device_id iwl3945_hw_card_ids[]; /* Module parameters accessible from iwl-*.c */ extern struct iwl_mod_params iwl3945_mod_params; +struct iwl3945_rate_scale_data { + u64 data; + s32 success_counter; + s32 success_ratio; + s32 counter; + s32 average_tpt; + unsigned long stamp; +}; + +struct iwl3945_rs_sta { + spinlock_t lock; + struct iwl_priv *priv; + s32 *expected_tpt; + unsigned long last_partial_flush; + unsigned long last_flush; + u32 flush_time; + u32 last_tx_packets; + u32 tx_packets; + u8 tgg; + u8 flush_pending; + u8 start_rate; + u8 ibss_sta_added; + struct timer_list rate_scale_flush; + struct iwl3945_rate_scale_data win[IWL_RATE_COUNT_3945]; +#ifdef CONFIG_MAC80211_DEBUGFS + struct dentry *rs_sta_dbgfs_stats_table_file; +#endif + + /* used to be in sta_info */ + int last_txrate_idx; +}; + + struct iwl3945_sta_priv { - struct iwl3945_rs_sta *rs_sta; + struct iwl3945_rs_sta rs_sta; }; enum iwl3945_antenna { diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index d256fecc6cda..910217f0ad8a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -591,16 +591,6 @@ static void iwl5000_tx_queue_set_status(struct iwl_priv *priv, scd_retry ? "BA" : "AC", txq_id, tx_fifo_id); } -static int iwl5000_send_wimax_coex(struct iwl_priv *priv) -{ - struct iwl_wimax_coex_cmd coex_cmd; - - memset(&coex_cmd, 0, sizeof(coex_cmd)); - - return iwl_send_cmd_pdu(priv, COEX_PRIORITY_TABLE_CMD, - sizeof(coex_cmd), &coex_cmd); -} - int iwl5000_alive_notify(struct iwl_priv *priv) { u32 a; @@ -681,7 +671,7 @@ int iwl5000_alive_notify(struct iwl_priv *priv) spin_unlock_irqrestore(&priv->lock, flags); - iwl5000_send_wimax_coex(priv); + iwl_send_wimax_coex(priv); iwl5000_set_Xtal_calib(priv); iwl_send_calib_results(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 32466d38d1ae..70e117f8d0c4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -299,7 +299,7 @@ struct iwl_cfg iwl6000h_2agn_cfg = { .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, - .set_l0s = false, + .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_HYBRID, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, @@ -329,7 +329,7 @@ struct iwl_cfg iwl6000h_2abg_cfg = { .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, - .set_l0s = false, + .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_HYBRID, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, @@ -358,7 +358,7 @@ struct iwl_cfg iwl6000h_2bg_cfg = { .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, - .set_l0s = false, + .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_HYBRID, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, @@ -390,7 +390,7 @@ struct iwl_cfg iwl6000i_2agn_cfg = { .valid_tx_ant = ANT_BC, .valid_rx_ant = ANT_BC, .pll_cfg_val = 0, - .set_l0s = false, + .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_INTERNAL, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, @@ -420,7 +420,7 @@ struct iwl_cfg iwl6000i_2abg_cfg = { .valid_tx_ant = ANT_BC, .valid_rx_ant = ANT_BC, .pll_cfg_val = 0, - .set_l0s = false, + .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_INTERNAL, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, @@ -449,7 +449,7 @@ struct iwl_cfg iwl6000i_2bg_cfg = { .valid_tx_ant = ANT_BC, .valid_rx_ant = ANT_BC, .pll_cfg_val = 0, - .set_l0s = false, + .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_INTERNAL, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, @@ -478,7 +478,7 @@ struct iwl_cfg iwl6050_2agn_cfg = { .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, - .set_l0s = false, + .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x50, @@ -490,6 +490,8 @@ struct iwl_cfg iwl6050_2agn_cfg = { .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, + .support_sm_ps = true, + .support_wimax_coexist = true, }; struct iwl_cfg iwl6050_2abg_cfg = { @@ -508,7 +510,7 @@ struct iwl_cfg iwl6050_2abg_cfg = { .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_AB, .pll_cfg_val = 0, - .set_l0s = false, + .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x50, @@ -519,6 +521,7 @@ struct iwl_cfg iwl6050_2abg_cfg = { .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, + .support_wimax_coexist = true, }; struct iwl_cfg iwl6000_3agn_cfg = { @@ -537,7 +540,7 @@ struct iwl_cfg iwl6000_3agn_cfg = { .valid_tx_ant = ANT_ABC, .valid_rx_ant = ANT_ABC, .pll_cfg_val = 0, - .set_l0s = false, + .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, @@ -567,7 +570,7 @@ struct iwl_cfg iwl6050_3agn_cfg = { .valid_tx_ant = ANT_ABC, .valid_rx_ant = ANT_ABC, .pll_cfg_val = 0, - .set_l0s = false, + .set_l0s = true, .use_bsm = false, .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x50, @@ -579,6 +582,8 @@ struct iwl_cfg iwl6050_3agn_cfg = { .supports_idle = true, .adv_thermal_throttle = true, .support_ct_kill_exit = true, + .support_sm_ps = true, + .support_wimax_coexist = true, }; MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX)); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 27d4ece4d467..43edd8fd4405 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -2477,19 +2477,12 @@ static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta, struct iwl_lq_sta *lq_sta; struct iwl_station_priv *sta_priv = (struct iwl_station_priv *) sta->drv_priv; struct iwl_priv *priv; - int i, j; priv = (struct iwl_priv *)priv_rate; IWL_DEBUG_RATE(priv, "create station rate scale window\n"); lq_sta = &sta_priv->lq_sta; - lq_sta->lq.sta_id = 0xff; - - for (j = 0; j < LQ_SIZE; j++) - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); - return lq_sta; } @@ -2502,6 +2495,12 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband, struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; struct iwl_lq_sta *lq_sta = priv_sta; + lq_sta->lq.sta_id = 0xff; + + for (j = 0; j < LQ_SIZE; j++) + for (i = 0; i < IWL_RATE_COUNT; i++) + rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); + lq_sta->flush_timer = 0; lq_sta->supp_rates = sta->supp_rates[sband->band]; for (j = 0; j < LQ_SIZE; j++) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index fa1672e99e4b..b5fe8f87aa7e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -190,11 +190,7 @@ int iwl_commit_rxon(struct iwl_priv *priv) priv->start_calib = 0; /* Add the broadcast address so we can send broadcast frames */ - if (iwl_rxon_add_station(priv, iwl_bcast_addr, 0) == - IWL_INVALID_STATION) { - IWL_ERR(priv, "Error adding BROADCAST address for transmit.\n"); - return -EIO; - } + iwl_add_bcast_station(priv); /* If we have set the ASSOC_MSK and we are in BSS mode then * add the IWL_AP_ID to the station rate table */ @@ -890,6 +886,7 @@ static void iwl_irq_tasklet_legacy(struct iwl_priv *priv) u32 inta, handled = 0; u32 inta_fh; unsigned long flags; + u32 i; #ifdef CONFIG_IWLWIFI_DEBUG u32 inta_mask; #endif @@ -1007,19 +1004,17 @@ static void iwl_irq_tasklet_legacy(struct iwl_priv *priv) handled |= CSR_INT_BIT_SW_ERR; } - /* uCode wakes up after power-down sleep */ + /* + * uCode wakes up after power-down sleep. + * Tell device about any new tx or host commands enqueued, + * and about any Rx buffers made available while asleep. + */ if (inta & CSR_INT_BIT_WAKEUP) { IWL_DEBUG_ISR(priv, "Wakeup interrupt\n"); iwl_rx_queue_update_write_ptr(priv, &priv->rxq); - iwl_txq_update_write_ptr(priv, &priv->txq[0]); - iwl_txq_update_write_ptr(priv, &priv->txq[1]); - iwl_txq_update_write_ptr(priv, &priv->txq[2]); - iwl_txq_update_write_ptr(priv, &priv->txq[3]); - iwl_txq_update_write_ptr(priv, &priv->txq[4]); - iwl_txq_update_write_ptr(priv, &priv->txq[5]); - + for (i = 0; i < priv->hw_params.max_txq_num; i++) + iwl_txq_update_write_ptr(priv, &priv->txq[i]); priv->isr_stats.wakeup++; - handled |= CSR_INT_BIT_WAKEUP; } @@ -1033,11 +1028,12 @@ static void iwl_irq_tasklet_legacy(struct iwl_priv *priv) handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); } + /* This "Tx" DMA channel is used only for loading uCode */ if (inta & CSR_INT_BIT_FH_TX) { - IWL_DEBUG_ISR(priv, "Tx interrupt\n"); + IWL_DEBUG_ISR(priv, "uCode load interrupt\n"); priv->isr_stats.tx++; handled |= CSR_INT_BIT_FH_TX; - /* FH finished to write, send event */ + /* Wake up uCode load routine, now that load is complete */ priv->ucode_write_complete = 1; wake_up_interruptible(&priv->wait_command_queue); } @@ -1234,12 +1230,13 @@ static void iwl_irq_tasklet(struct iwl_priv *priv) iwl_leds_background(priv); } + /* This "Tx" DMA channel is used only for loading uCode */ if (inta & CSR_INT_BIT_FH_TX) { iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK); - IWL_DEBUG_ISR(priv, "Tx interrupt\n"); + IWL_DEBUG_ISR(priv, "uCode load interrupt\n"); priv->isr_stats.tx++; handled |= CSR_INT_BIT_FH_TX; - /* FH finished to write, send event */ + /* Wake up uCode load routine, now that load is complete */ priv->ucode_write_complete = 1; wake_up_interruptible(&priv->wait_command_queue); } @@ -1377,6 +1374,14 @@ static int iwl_read_ucode(struct iwl_priv *priv) IWL_UCODE_API(priv->ucode_ver), IWL_UCODE_SERIAL(priv->ucode_ver)); + snprintf(priv->hw->wiphy->fw_version, + sizeof(priv->hw->wiphy->fw_version), + "%u.%u.%u.%u", + IWL_UCODE_MAJOR(priv->ucode_ver), + IWL_UCODE_MINOR(priv->ucode_ver), + IWL_UCODE_API(priv->ucode_ver), + IWL_UCODE_SERIAL(priv->ucode_ver)); + if (build) IWL_DEBUG_INFO(priv, "Build %u\n", build); @@ -2515,7 +2520,7 @@ void iwl_config_ap(struct iwl_priv *priv) spin_lock_irqsave(&priv->lock, flags); iwl_activate_qos(priv, 1); spin_unlock_irqrestore(&priv->lock, flags); - iwl_rxon_add_station(priv, iwl_bcast_addr, 0); + iwl_add_bcast_station(priv); } iwl_send_beacon_cmd(priv); @@ -2963,6 +2968,100 @@ static void iwl_cancel_deferred_work(struct iwl_priv *priv) del_timer_sync(&priv->statistics_periodic); } +static void iwl_init_hw_rates(struct iwl_priv *priv, + struct ieee80211_rate *rates) +{ + int i; + + for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) { + rates[i].bitrate = iwl_rates[i].ieee * 5; + rates[i].hw_value = i; /* Rate scaling will work on indexes */ + rates[i].hw_value_short = i; + rates[i].flags = 0; + if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) { + /* + * If CCK != 1M then set short preamble rate flag. + */ + rates[i].flags |= + (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ? + 0 : IEEE80211_RATE_SHORT_PREAMBLE; + } + } +} + +static int iwl_init_drv(struct iwl_priv *priv) +{ + int ret; + + priv->ibss_beacon = NULL; + + spin_lock_init(&priv->lock); + spin_lock_init(&priv->sta_lock); + spin_lock_init(&priv->hcmd_lock); + + INIT_LIST_HEAD(&priv->free_frames); + + mutex_init(&priv->mutex); + + /* Clear the driver's (not device's) station table */ + iwl_clear_stations_table(priv); + + priv->ieee_channels = NULL; + priv->ieee_rates = NULL; + priv->band = IEEE80211_BAND_2GHZ; + + priv->iw_mode = NL80211_IFTYPE_STATION; + if (priv->cfg->support_sm_ps) + priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DYNAMIC; + else + priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED; + + /* Choose which receivers/antennas to use */ + if (priv->cfg->ops->hcmd->set_rxon_chain) + priv->cfg->ops->hcmd->set_rxon_chain(priv); + + iwl_init_scan_params(priv); + + iwl_reset_qos(priv); + + priv->qos_data.qos_active = 0; + priv->qos_data.qos_cap.val = 0; + + priv->rates_mask = IWL_RATES_MASK; + /* Set the tx_power_user_lmt to the lowest power level + * this value will get overwritten by channel max power avg + * from eeprom */ + priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MIN; + + ret = iwl_init_channel_map(priv); + if (ret) { + IWL_ERR(priv, "initializing regulatory failed: %d\n", ret); + goto err; + } + + ret = iwlcore_init_geos(priv); + if (ret) { + IWL_ERR(priv, "initializing geos failed: %d\n", ret); + goto err_free_channel_map; + } + iwl_init_hw_rates(priv, priv->ieee_rates); + + return 0; + +err_free_channel_map: + iwl_free_channel_map(priv); +err: + return ret; +} + +static void iwl_uninit_drv(struct iwl_priv *priv) +{ + iwl_calib_free_results(priv); + iwlcore_free_geos(priv); + iwl_free_channel_map(priv); + kfree(priv->scan); +} + static struct attribute *iwl_sysfs_entries[] = { &dev_attr_flags.attr, &dev_attr_filter_flags.attr, @@ -3105,12 +3204,6 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto out_iounmap; } - /* amp init */ - err = priv->cfg->ops->lib->apm_ops.init(priv); - if (err < 0) { - IWL_ERR(priv, "Failed to init APMG\n"); - goto out_iounmap; - } /***************** * 4. Read EEPROM *****************/ diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c index 1f801eb9fbff..d994de7438d8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-calib.c +++ b/drivers/net/wireless/iwlwifi/iwl-calib.c @@ -132,6 +132,7 @@ void iwl_calib_free_results(struct iwl_priv *priv) priv->calib_results[i].buf_len = 0; } } +EXPORT_SYMBOL(iwl_calib_free_results); /***************************************************************************** * RUNTIME calibrations framework diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 954bad60355d..b62c90ec9e1e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -3503,30 +3503,134 @@ struct iwl_led_cmd { } __attribute__ ((packed)); /* - * Coexistence WIFI/WIMAX Command - * COEX_PRIORITY_TABLE_CMD = 0x5a - * + * station priority table entries + * also used as potential "events" value for both + * COEX_MEDIUM_NOTIFICATION and COEX_EVENT_CMD */ + +/* + * COEX events entry flag masks + * RP - Requested Priority + * WP - Win Medium Priority: priority assigned when the contention has been won + */ +#define COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG (0x1) +#define COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG (0x2) +#define COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG (0x4) + +#define COEX_CU_UNASSOC_IDLE_RP 4 +#define COEX_CU_UNASSOC_MANUAL_SCAN_RP 4 +#define COEX_CU_UNASSOC_AUTO_SCAN_RP 4 +#define COEX_CU_CALIBRATION_RP 4 +#define COEX_CU_PERIODIC_CALIBRATION_RP 4 +#define COEX_CU_CONNECTION_ESTAB_RP 4 +#define COEX_CU_ASSOCIATED_IDLE_RP 4 +#define COEX_CU_ASSOC_MANUAL_SCAN_RP 4 +#define COEX_CU_ASSOC_AUTO_SCAN_RP 4 +#define COEX_CU_ASSOC_ACTIVE_LEVEL_RP 4 +#define COEX_CU_RF_ON_RP 6 +#define COEX_CU_RF_OFF_RP 4 +#define COEX_CU_STAND_ALONE_DEBUG_RP 6 +#define COEX_CU_IPAN_ASSOC_LEVEL_RP 4 +#define COEX_CU_RSRVD1_RP 4 +#define COEX_CU_RSRVD2_RP 4 + +#define COEX_CU_UNASSOC_IDLE_WP 3 +#define COEX_CU_UNASSOC_MANUAL_SCAN_WP 3 +#define COEX_CU_UNASSOC_AUTO_SCAN_WP 3 +#define COEX_CU_CALIBRATION_WP 3 +#define COEX_CU_PERIODIC_CALIBRATION_WP 3 +#define COEX_CU_CONNECTION_ESTAB_WP 3 +#define COEX_CU_ASSOCIATED_IDLE_WP 3 +#define COEX_CU_ASSOC_MANUAL_SCAN_WP 3 +#define COEX_CU_ASSOC_AUTO_SCAN_WP 3 +#define COEX_CU_ASSOC_ACTIVE_LEVEL_WP 3 +#define COEX_CU_RF_ON_WP 3 +#define COEX_CU_RF_OFF_WP 3 +#define COEX_CU_STAND_ALONE_DEBUG_WP 6 +#define COEX_CU_IPAN_ASSOC_LEVEL_WP 3 +#define COEX_CU_RSRVD1_WP 3 +#define COEX_CU_RSRVD2_WP 3 + +#define COEX_UNASSOC_IDLE_FLAGS 0 +#define COEX_UNASSOC_MANUAL_SCAN_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) +#define COEX_UNASSOC_AUTO_SCAN_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) +#define COEX_CALIBRATION_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) +#define COEX_PERIODIC_CALIBRATION_FLAGS 0 +/* + * COEX_CONNECTION_ESTAB: + * we need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network. + */ +#define COEX_CONNECTION_ESTAB_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \ + COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG) +#define COEX_ASSOCIATED_IDLE_FLAGS 0 +#define COEX_ASSOC_MANUAL_SCAN_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) +#define COEX_ASSOC_AUTO_SCAN_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) +#define COEX_ASSOC_ACTIVE_LEVEL_FLAGS 0 +#define COEX_RF_ON_FLAGS 0 +#define COEX_RF_OFF_FLAGS 0 +#define COEX_STAND_ALONE_DEBUG_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) +#define COEX_IPAN_ASSOC_LEVEL_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \ + COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG) +#define COEX_RSRVD1_FLAGS 0 +#define COEX_RSRVD2_FLAGS 0 +/* + * COEX_CU_RF_ON is the event wrapping all radio ownership. + * We need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network. + */ +#define COEX_CU_RF_ON_FLAGS \ + (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ + COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \ + COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG) + + enum { + /* un-association part */ COEX_UNASSOC_IDLE = 0, COEX_UNASSOC_MANUAL_SCAN = 1, COEX_UNASSOC_AUTO_SCAN = 2, + /* calibration */ COEX_CALIBRATION = 3, COEX_PERIODIC_CALIBRATION = 4, + /* connection */ COEX_CONNECTION_ESTAB = 5, + /* association part */ COEX_ASSOCIATED_IDLE = 6, COEX_ASSOC_MANUAL_SCAN = 7, COEX_ASSOC_AUTO_SCAN = 8, COEX_ASSOC_ACTIVE_LEVEL = 9, + /* RF ON/OFF */ COEX_RF_ON = 10, COEX_RF_OFF = 11, COEX_STAND_ALONE_DEBUG = 12, + /* IPAN */ COEX_IPAN_ASSOC_LEVEL = 13, + /* reserved */ COEX_RSRVD1 = 14, COEX_RSRVD2 = 15, COEX_NUM_OF_EVENTS = 16 }; +/* + * Coexistence WIFI/WIMAX Command + * COEX_PRIORITY_TABLE_CMD = 0x5a + * + */ struct iwl_wimax_coex_event_entry { u8 request_prio; u8 win_medium_prio; @@ -3551,6 +3655,55 @@ struct iwl_wimax_coex_cmd { struct iwl_wimax_coex_event_entry sta_prio[COEX_NUM_OF_EVENTS]; } __attribute__ ((packed)); +/* + * Coexistence MEDIUM NOTIFICATION + * COEX_MEDIUM_NOTIFICATION = 0x5b + * + * notification from uCode to host to indicate medium changes + * + */ +/* + * status field + * bit 0 - 2: medium status + * bit 3: medium change indication + * bit 4 - 31: reserved + */ +/* status option values, (0 - 2 bits) */ +#define COEX_MEDIUM_BUSY (0x0) /* radio belongs to WiMAX */ +#define COEX_MEDIUM_ACTIVE (0x1) /* radio belongs to WiFi */ +#define COEX_MEDIUM_PRE_RELEASE (0x2) /* received radio release */ +#define COEX_MEDIUM_MSK (0x7) + +/* send notification status (1 bit) */ +#define COEX_MEDIUM_CHANGED (0x8) +#define COEX_MEDIUM_CHANGED_MSK (0x8) +#define COEX_MEDIUM_SHIFT (3) + +struct iwl_coex_medium_notification { + __le32 status; + __le32 events; +} __attribute__ ((packed)); + +/* + * Coexistence EVENT Command + * COEX_EVENT_CMD = 0x5c + * + * send from host to uCode for coex event request. + */ +/* flags options */ +#define COEX_EVENT_REQUEST_MSK (0x1) + +struct iwl_coex_event_cmd { + u8 flags; + u8 event; + __le16 reserved; +} __attribute__ ((packed)); + +struct iwl_coex_event_resp { + __le32 status; +} __attribute__ ((packed)); + + /****************************************************************************** * (13) * Union of all expected notifications/responses: @@ -3587,6 +3740,8 @@ struct iwl_rx_packet { struct iwl_notif_statistics stats; struct iwl_compressed_ba_resp compressed_ba; struct iwl_missed_beacon_notif missed_beacon; + struct iwl_coex_medium_notification coex_medium_notif; + struct iwl_coex_event_resp coex_event; __le32 status; u8 raw[0]; } u; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index d2b56baf98fb..e0b5b4aef41d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -46,6 +46,37 @@ MODULE_VERSION(IWLWIFI_VERSION); MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); MODULE_LICENSE("GPL"); +static struct iwl_wimax_coex_event_entry cu_priorities[COEX_NUM_OF_EVENTS] = { + {COEX_CU_UNASSOC_IDLE_RP, COEX_CU_UNASSOC_IDLE_WP, + 0, COEX_UNASSOC_IDLE_FLAGS}, + {COEX_CU_UNASSOC_MANUAL_SCAN_RP, COEX_CU_UNASSOC_MANUAL_SCAN_WP, + 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS}, + {COEX_CU_UNASSOC_AUTO_SCAN_RP, COEX_CU_UNASSOC_AUTO_SCAN_WP, + 0, COEX_UNASSOC_AUTO_SCAN_FLAGS}, + {COEX_CU_CALIBRATION_RP, COEX_CU_CALIBRATION_WP, + 0, COEX_CALIBRATION_FLAGS}, + {COEX_CU_PERIODIC_CALIBRATION_RP, COEX_CU_PERIODIC_CALIBRATION_WP, + 0, COEX_PERIODIC_CALIBRATION_FLAGS}, + {COEX_CU_CONNECTION_ESTAB_RP, COEX_CU_CONNECTION_ESTAB_WP, + 0, COEX_CONNECTION_ESTAB_FLAGS}, + {COEX_CU_ASSOCIATED_IDLE_RP, COEX_CU_ASSOCIATED_IDLE_WP, + 0, COEX_ASSOCIATED_IDLE_FLAGS}, + {COEX_CU_ASSOC_MANUAL_SCAN_RP, COEX_CU_ASSOC_MANUAL_SCAN_WP, + 0, COEX_ASSOC_MANUAL_SCAN_FLAGS}, + {COEX_CU_ASSOC_AUTO_SCAN_RP, COEX_CU_ASSOC_AUTO_SCAN_WP, + 0, COEX_ASSOC_AUTO_SCAN_FLAGS}, + {COEX_CU_ASSOC_ACTIVE_LEVEL_RP, COEX_CU_ASSOC_ACTIVE_LEVEL_WP, + 0, COEX_ASSOC_ACTIVE_LEVEL_FLAGS}, + {COEX_CU_RF_ON_RP, COEX_CU_RF_ON_WP, 0, COEX_CU_RF_ON_FLAGS}, + {COEX_CU_RF_OFF_RP, COEX_CU_RF_OFF_WP, 0, COEX_RF_OFF_FLAGS}, + {COEX_CU_STAND_ALONE_DEBUG_RP, COEX_CU_STAND_ALONE_DEBUG_WP, + 0, COEX_STAND_ALONE_DEBUG_FLAGS}, + {COEX_CU_IPAN_ASSOC_LEVEL_RP, COEX_CU_IPAN_ASSOC_LEVEL_WP, + 0, COEX_IPAN_ASSOC_LEVEL_FLAGS}, + {COEX_CU_RSRVD1_RP, COEX_CU_RSRVD1_WP, 0, COEX_RSRVD1_FLAGS}, + {COEX_CU_RSRVD2_RP, COEX_CU_RSRVD2_WP, 0, COEX_RSRVD2_FLAGS} +}; + #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \ [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ IWL_RATE_SISO_##s##M_PLCP, \ @@ -414,8 +445,12 @@ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, if (priv->cfg->ht_greenfield_support) ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD; ht_info->cap |= IEEE80211_HT_CAP_SGI_20; - ht_info->cap |= (IEEE80211_HT_CAP_SM_PS & - (WLAN_HT_CAP_SM_PS_DISABLED << 2)); + if (priv->cfg->support_sm_ps) + ht_info->cap |= (IEEE80211_HT_CAP_SM_PS & + (WLAN_HT_CAP_SM_PS_DYNAMIC << 2)); + else + ht_info->cap |= (IEEE80211_HT_CAP_SM_PS & + (WLAN_HT_CAP_SM_PS_DISABLED << 2)); max_bit_rate = MAX_BIT_RATE_20_MHZ; if (priv->hw_params.ht40_channel & BIT(band)) { @@ -451,28 +486,6 @@ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, } } -static void iwlcore_init_hw_rates(struct iwl_priv *priv, - struct ieee80211_rate *rates) -{ - int i; - - for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) { - rates[i].bitrate = iwl_rates[i].ieee * 5; - rates[i].hw_value = i; /* Rate scaling will work on indexes */ - rates[i].hw_value_short = i; - rates[i].flags = 0; - if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) { - /* - * If CCK != 1M then set short preamble rate flag. - */ - rates[i].flags |= - (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ? - 0 : IEEE80211_RATE_SHORT_PREAMBLE; - } - } -} - - /** * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom */ @@ -985,17 +998,35 @@ static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) } /* - * When we are in power saving, there's no difference between - * using multiple chains or just a single chain, but due to the - * lack of SM PS we lose a lot of throughput if we use just a - * single chain. - * - * Therefore, use the active count here (which will use multiple - * chains unless connected to a legacy AP). + * When we are in power saving mode, unless device support spatial + * multiplexing power save, use the active count for rx chain count. */ static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) { - return active_cnt; + int idle_cnt = active_cnt; + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); + + if (priv->cfg->support_sm_ps) { + /* # Rx chains when idling and maybe trying to save power */ + switch (priv->current_ht_config.sm_ps) { + case WLAN_HT_CAP_SM_PS_STATIC: + case WLAN_HT_CAP_SM_PS_DYNAMIC: + idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL : + IWL_NUM_IDLE_CHAINS_SINGLE; + break; + case WLAN_HT_CAP_SM_PS_DISABLED: + idle_cnt = (is_cam) ? active_cnt : + IWL_NUM_IDLE_CHAINS_SINGLE; + break; + case WLAN_HT_CAP_SM_PS_INVALID: + default: + IWL_ERR(priv, "invalid sm_ps mode %d\n", + priv->current_ht_config.sm_ps); + WARN_ON(1); + break; + } + } + return idle_cnt; } /* up to 4 chains */ @@ -1353,39 +1384,39 @@ EXPORT_SYMBOL(iwl_irq_handle_error); int iwl_apm_stop_master(struct iwl_priv *priv) { - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); + int ret = 0; - /* set stop master bit */ + /* stop device's busmaster DMA activity */ iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER); - iwl_poll_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED, + ret = iwl_poll_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED, CSR_RESET_REG_FLAG_MASTER_DISABLED, 100); + if (ret) + IWL_WARN(priv, "Master Disable Timed Out, 100 usec\n"); - spin_unlock_irqrestore(&priv->lock, flags); IWL_DEBUG_INFO(priv, "stop master\n"); - return 0; + return ret; } EXPORT_SYMBOL(iwl_apm_stop_master); void iwl_apm_stop(struct iwl_priv *priv) { - unsigned long flags; - IWL_DEBUG_INFO(priv, "Stop card, put in low power state\n"); + /* Stop device's DMA activity */ iwl_apm_stop_master(priv); - spin_lock_irqsave(&priv->lock, flags); - + /* Reset the entire device */ iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); udelay(10); - /* clear "init complete" move adapter D0A* --> D0U state */ + + /* + * Clear "initialization complete" bit to move adapter from + * D0A* (powered-up Active) --> D0U* (Uninitialized) state. + */ iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - spin_unlock_irqrestore(&priv->lock, flags); } EXPORT_SYMBOL(iwl_apm_stop); @@ -1430,8 +1461,12 @@ int iwl_apm_init(struct iwl_priv *priv) CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); /* - * HW bug W/A - costs negligible power consumption ... - * Check if BIOS (or OS) enabled L1-ASPM on this device + * HW bug W/A for instability in PCIe bus L0->L0S->L1 transition. + * Check if BIOS (or OS) enabled L1-ASPM on this device. + * If so (likely), disable L0S, so device moves directly L0->L1; + * costs negligible amount of power savings. + * If not (unlikely), enable L0S, so there is at least some + * power savings, even without L1. */ if (priv->cfg->set_l0s) { lctl = iwl_pcie_link_ctl(priv); @@ -1567,68 +1602,6 @@ int iwl_set_hw_params(struct iwl_priv *priv) } EXPORT_SYMBOL(iwl_set_hw_params); -int iwl_init_drv(struct iwl_priv *priv) -{ - int ret; - - priv->ibss_beacon = NULL; - - spin_lock_init(&priv->lock); - spin_lock_init(&priv->sta_lock); - spin_lock_init(&priv->hcmd_lock); - - INIT_LIST_HEAD(&priv->free_frames); - - mutex_init(&priv->mutex); - - /* Clear the driver's (not device's) station table */ - iwl_clear_stations_table(priv); - - priv->ieee_channels = NULL; - priv->ieee_rates = NULL; - priv->band = IEEE80211_BAND_2GHZ; - - priv->iw_mode = NL80211_IFTYPE_STATION; - - /* Choose which receivers/antennas to use */ - if (priv->cfg->ops->hcmd->set_rxon_chain) - priv->cfg->ops->hcmd->set_rxon_chain(priv); - - iwl_init_scan_params(priv); - - iwl_reset_qos(priv); - - priv->qos_data.qos_active = 0; - priv->qos_data.qos_cap.val = 0; - - priv->rates_mask = IWL_RATES_MASK; - /* Set the tx_power_user_lmt to the lowest power level - * this value will get overwritten by channel max power avg - * from eeprom */ - priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MIN; - - ret = iwl_init_channel_map(priv); - if (ret) { - IWL_ERR(priv, "initializing regulatory failed: %d\n", ret); - goto err; - } - - ret = iwlcore_init_geos(priv); - if (ret) { - IWL_ERR(priv, "initializing geos failed: %d\n", ret); - goto err_free_channel_map; - } - iwlcore_init_hw_rates(priv, priv->ieee_rates); - - return 0; - -err_free_channel_map: - iwl_free_channel_map(priv); -err: - return ret; -} -EXPORT_SYMBOL(iwl_init_drv); - int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) { int ret = 0; @@ -1676,15 +1649,6 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) } EXPORT_SYMBOL(iwl_set_tx_power); -void iwl_uninit_drv(struct iwl_priv *priv) -{ - iwl_calib_free_results(priv); - iwlcore_free_geos(priv); - iwl_free_channel_map(priv); - kfree(priv->scan); -} -EXPORT_SYMBOL(iwl_uninit_drv); - #define ICT_COUNT (PAGE_SIZE/sizeof(u32)) /* Free dram table */ @@ -2336,7 +2300,7 @@ static void iwl_ht_conf(struct iwl_priv *priv, switch (priv->iw_mode) { case NL80211_IFTYPE_STATION: rcu_read_lock(); - sta = ieee80211_find_sta(priv->hw, priv->bssid); + sta = ieee80211_find_sta(priv->vif, priv->bssid); if (sta) { struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; int maxstreams; @@ -2346,6 +2310,12 @@ static void iwl_ht_conf(struct iwl_priv *priv, >> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT; maxstreams += 1; + ht_conf->sm_ps = + (u8)((ht_cap->cap & IEEE80211_HT_CAP_SM_PS) + >> 2); + IWL_DEBUG_MAC80211(priv, "sm_ps: 0x%x\n", + ht_conf->sm_ps); + if ((ht_cap->mcs.rx_mask[1] == 0) && (ht_cap->mcs.rx_mask[2] == 0)) ht_conf->single_chain_sufficient = true; @@ -2926,6 +2896,34 @@ void iwl_free_txq_mem(struct iwl_priv *priv) } EXPORT_SYMBOL(iwl_free_txq_mem); +int iwl_send_wimax_coex(struct iwl_priv *priv) +{ + struct iwl_wimax_coex_cmd uninitialized_var(coex_cmd); + + if (priv->cfg->support_wimax_coexist) { + /* UnMask wake up src at associated sleep */ + coex_cmd.flags |= COEX_FLAGS_ASSOC_WA_UNMASK_MSK; + + /* UnMask wake up src at unassociated sleep */ + coex_cmd.flags |= COEX_FLAGS_UNASSOC_WA_UNMASK_MSK; + memcpy(coex_cmd.sta_prio, cu_priorities, + sizeof(struct iwl_wimax_coex_event_entry) * + COEX_NUM_OF_EVENTS); + + /* enabling the coexistence feature */ + coex_cmd.flags |= COEX_FLAGS_COEX_ENABLE_MSK; + + /* enabling the priorities tables */ + coex_cmd.flags |= COEX_FLAGS_STA_TABLE_VALID_MSK; + } else { + /* coexistence is disabled */ + memset(&coex_cmd, 0, sizeof(coex_cmd)); + } + return iwl_send_cmd_pdu(priv, COEX_PRIORITY_TABLE_CMD, + sizeof(coex_cmd), &coex_cmd); +} +EXPORT_SYMBOL(iwl_send_wimax_coex); + #ifdef CONFIG_IWLWIFI_DEBUGFS #define IWL_TRAFFIC_DUMP_SIZE (IWL_TRAFFIC_ENTRY_SIZE * IWL_TRAFFIC_ENTRIES) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index b875dcfca2d6..9574d8f33537 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -228,6 +228,8 @@ struct iwl_mod_params { * @chain_noise_num_beacons: number of beacons used to compute chain noise * @adv_thermal_throttle: support advance thermal throttle * @support_ct_kill_exit: support ct kill exit condition + * @support_sm_ps: support spatial multiplexing power save + * @support_wimax_coexist: support wimax/wifi co-exist * * We enable the driver to be backward compatible wrt API version. The * driver specifies which APIs it supports (with @ucode_api_max being the @@ -283,6 +285,8 @@ struct iwl_cfg { const bool supports_idle; bool adv_thermal_throttle; bool support_ct_kill_exit; + bool support_sm_ps; + const bool support_wimax_coexist; }; /*************************** @@ -316,8 +320,6 @@ void iwl_configure_filter(struct ieee80211_hw *hw, unsigned int *total_flags, u64 multicast); int iwl_hw_nic_init(struct iwl_priv *priv); int iwl_set_hw_params(struct iwl_priv *priv); -int iwl_init_drv(struct iwl_priv *priv); -void iwl_uninit_drv(struct iwl_priv *priv); bool iwl_is_monitor_mode(struct iwl_priv *priv); void iwl_post_associate(struct iwl_priv *priv); void iwl_bss_info_changed(struct ieee80211_hw *hw, @@ -340,6 +342,7 @@ int iwl_alloc_txq_mem(struct iwl_priv *priv); void iwl_free_txq_mem(struct iwl_priv *priv); void iwlcore_rts_tx_cmd_flag(struct ieee80211_tx_info *info, __le32 *tx_flags); +int iwl_send_wimax_coex(struct iwl_priv *priv); #ifdef CONFIG_IWLWIFI_DEBUGFS int iwl_alloc_traffic_mem(struct iwl_priv *priv); void iwl_free_traffic_mem(struct iwl_priv *priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index e7ce67387662..cb2642c18da4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -517,6 +517,7 @@ struct iwl_ht_config { bool is_ht; bool is_40mhz; bool single_chain_sufficient; + u8 sm_ps; /* BSS related data */ u8 extension_chan_offset; u8 ht_protection; diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 9429cb1c69bd..8a0709e81a9f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -533,6 +533,10 @@ int iwl_eeprom_init(struct iwl_priv *priv) goto err; } if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) { + + /* OTP reads require powered-up chip */ + priv->cfg->ops->lib->apm_ops.init(priv); + ret = iwl_init_otp_access(priv); if (ret) { IWL_ERR(priv, "Failed to initialize OTP access.\n"); @@ -563,6 +567,13 @@ int iwl_eeprom_init(struct iwl_priv *priv) e[cache_addr / 2] = eeprom_data; cache_addr += sizeof(u16); } + + /* + * Now that OTP reads are complete, reset chip to save + * power until we load uCode during "up". + */ + priv->cfg->ops->lib->apm_ops.stop(priv); + } else { /* eeprom is an array of 16bit values */ for (addr = 0; addr < sz; addr += sizeof(u16)) { diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index f2a60dc4109f..905645d15a9b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -55,6 +55,8 @@ const char *get_cmd_string(u8 cmd) IWL_CMD(REPLY_LEDS_CMD); IWL_CMD(REPLY_TX_LINK_QUALITY_CMD); IWL_CMD(COEX_PRIORITY_TABLE_CMD); + IWL_CMD(COEX_MEDIUM_NOTIFICATION); + IWL_CMD(COEX_EVENT_CMD); IWL_CMD(RADAR_NOTIFICATION); IWL_CMD(REPLY_QUIET_CMD); IWL_CMD(REPLY_CHANNEL_SWITCH); diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 4fca65a2fe9c..1eb0d0bf1fe4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -401,6 +401,7 @@ void iwl_init_scan_params(struct iwl_priv *priv) if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ]) priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx; } +EXPORT_SYMBOL(iwl_init_scan_params); static int iwl_scan_initiate(struct iwl_priv *priv) { diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index dc74c16d36a8..eba36f737388 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -182,6 +182,11 @@ static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index, goto done; mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2; + IWL_DEBUG_ASSOC(priv, "spatial multiplexing power save mode: %s\n", + (mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ? + "static" : + (mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ? + "dynamic" : "disabled"); sta_flags = priv->stations[index].sta.station_flags; @@ -1012,7 +1017,7 @@ int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap) */ if (priv->current_ht_config.is_ht) { rcu_read_lock(); - sta = ieee80211_find_sta(priv->hw, addr); + sta = ieee80211_find_sta(priv->vif, addr); if (sta) { memcpy(&ht_config, &sta->ht_cap, sizeof(ht_config)); cur_ht_config = &ht_config; @@ -1030,6 +1035,68 @@ int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap) EXPORT_SYMBOL(iwl_rxon_add_station); /** + * iwl_sta_init_bcast_lq - Initialize a bcast station's hardware rate table + * + * NOTE: Run REPLY_ADD_STA command to set up station table entry, before + * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD, + * which requires station table entry to exist). + */ +static void iwl_sta_init_bcast_lq(struct iwl_priv *priv) +{ + int i, r; + struct iwl_link_quality_cmd link_cmd = { + .reserved1 = 0, + }; + u32 rate_flags; + + /* Set up the rate scaling to start at selected rate, fall back + * all the way down to 1M in IEEE order, and then spin on 1M */ + if (priv->band == IEEE80211_BAND_5GHZ) + r = IWL_RATE_6M_INDEX; + else + r = IWL_RATE_1M_INDEX; + + for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { + rate_flags = 0; + if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE) + rate_flags |= RATE_MCS_CCK_MSK; + + rate_flags |= first_antenna(priv->hw_params.valid_tx_ant) << + RATE_MCS_ANT_POS; + + link_cmd.rs_table[i].rate_n_flags = + iwl_hw_set_rate_n_flags(iwl_rates[r].plcp, rate_flags); + r = iwl_get_prev_ieee_rate(r); + } + + link_cmd.general_params.single_stream_ant_msk = + first_antenna(priv->hw_params.valid_tx_ant); + link_cmd.general_params.dual_stream_ant_msk = 3; + link_cmd.agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; + link_cmd.agg_params.agg_time_limit = + cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); + + /* Update the rate scaling for control frame Tx to AP */ + link_cmd.sta_id = priv->hw_params.bcast_sta_id; + + iwl_send_cmd_pdu_async(priv, REPLY_TX_LINK_QUALITY_CMD, + sizeof(link_cmd), &link_cmd, NULL); +} + + +/** + * iwl_add_bcast_station - add broadcast station into station table. + */ +void iwl_add_bcast_station(struct iwl_priv *priv) +{ + iwl_add_station(priv, iwl_bcast_addr, false, CMD_SYNC, NULL); + + /* Set up default rate scaling table in device's station table */ + iwl_sta_init_bcast_lq(priv); +} +EXPORT_SYMBOL(iwl_add_bcast_station); + +/** * iwl_get_sta_id - Find station's index within station table * * If new IBSS station, create new entry in station table diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h index 6deebade6361..1c382de80d49 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.h +++ b/drivers/net/wireless/iwlwifi/iwl-sta.h @@ -52,6 +52,7 @@ void iwl_update_tkip_key(struct iwl_priv *priv, const u8 *addr, u32 iv32, u16 *phase1key); int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap); +void iwl_add_bcast_station(struct iwl_priv *priv); int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, bool is_ap); void iwl_clear_stations_table(struct iwl_priv *priv); int iwl_get_free_ucode_key_index(struct iwl_priv *priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 8ae4c9b614e7..05e75109d842 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -979,7 +979,8 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) !(cmd->flags & CMD_SIZE_HUGE)); if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) { - IWL_DEBUG_INFO(priv, "Not sending command - RF/CT KILL\n"); + IWL_WARN(priv, "Not sending command - %s KILL\n", + iwl_is_rfkill(priv) ? "RF" : "CT"); return -EIO; } @@ -1121,11 +1122,6 @@ static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id, return; } - pci_unmap_single(priv->pci_dev, - pci_unmap_addr(&txq->meta[cmd_idx], mapping), - pci_unmap_len(&txq->meta[cmd_idx], len), - PCI_DMA_BIDIRECTIONAL); - for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) { @@ -1173,6 +1169,11 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) cmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index]; meta = &priv->txq[IWL_CMD_QUEUE_NUM].meta[cmd_index]; + pci_unmap_single(priv->pci_dev, + pci_unmap_addr(meta, mapping), + pci_unmap_len(meta, len), + PCI_DMA_BIDIRECTIONAL); + /* Input error checking is done when commands are added to queue. */ if (meta->flags & CMD_WANT_SKB) { meta->source->reply_page = (unsigned long)rxb_addr(rxb); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index bfd7f497157f..23b31e6dcacd 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -2160,6 +2160,14 @@ static int iwl3945_read_ucode(struct iwl_priv *priv) IWL_UCODE_API(priv->ucode_ver), IWL_UCODE_SERIAL(priv->ucode_ver)); + snprintf(priv->hw->wiphy->fw_version, + sizeof(priv->hw->wiphy->fw_version), + "%u.%u.%u.%u", + IWL_UCODE_MAJOR(priv->ucode_ver), + IWL_UCODE_MINOR(priv->ucode_ver), + IWL_UCODE_API(priv->ucode_ver), + IWL_UCODE_SERIAL(priv->ucode_ver)); + IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n", priv->ucode_ver); IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n", @@ -3992,13 +4000,6 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e */ spin_lock_init(&priv->reg_lock); - /* amp init */ - err = priv->cfg->ops->lib->apm_ops.init(priv); - if (err < 0) { - IWL_DEBUG_INFO(priv, "Failed to init the card\n"); - goto out_iounmap; - } - /*********************** * 4. Read EEPROM * ********************/ diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig index 9606b3100fde..b9d34a766964 100644 --- a/drivers/net/wireless/iwmc3200wifi/Kconfig +++ b/drivers/net/wireless/iwmc3200wifi/Kconfig @@ -1,6 +1,6 @@ config IWM tristate "Intel Wireless Multicomm 3200 WiFi driver" - depends on MMC && WLAN_80211 && EXPERIMENTAL + depends on MMC && EXPERIMENTAL depends on CFG80211 select FW_LOADER select IWMC3200TOP diff --git a/drivers/net/wireless/libertas/Kconfig b/drivers/net/wireless/libertas/Kconfig index 8f8d75b61ea9..30aa9d48d67e 100644 --- a/drivers/net/wireless/libertas/Kconfig +++ b/drivers/net/wireless/libertas/Kconfig @@ -1,6 +1,6 @@ config LIBERTAS tristate "Marvell 8xxx Libertas WLAN driver support" - depends on WLAN_80211 && CFG80211 + depends on CFG80211 select WIRELESS_EXT select WEXT_SPY select LIB80211 diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index 30d9d0ea28eb..d6a48dd3652c 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -32,12 +32,6 @@ #include "dev.h" #include "if_spi.h" -struct if_spi_packet { - struct list_head list; - u16 blen; - u8 buffer[0] __attribute__((aligned(4))); -}; - struct if_spi_card { struct spi_device *spi; struct lbs_private *priv; @@ -66,33 +60,10 @@ struct if_spi_card { struct semaphore spi_thread_terminated; u8 cmd_buffer[IF_SPI_CMD_BUF_SIZE]; - - /* A buffer of incoming packets from libertas core. - * Since we can't sleep in hw_host_to_card, we have to buffer - * them. */ - struct list_head cmd_packet_list; - struct list_head data_packet_list; - - /* Protects cmd_packet_list and data_packet_list */ - spinlock_t buffer_lock; }; static void free_if_spi_card(struct if_spi_card *card) { - struct list_head *cursor, *next; - struct if_spi_packet *packet; - - BUG_ON(card->run_thread); - list_for_each_safe(cursor, next, &card->cmd_packet_list) { - packet = container_of(cursor, struct if_spi_packet, list); - list_del(&packet->list); - kfree(packet); - } - list_for_each_safe(cursor, next, &card->data_packet_list) { - packet = container_of(cursor, struct if_spi_packet, list); - list_del(&packet->list); - kfree(packet); - } spi_set_drvdata(card->spi, NULL); kfree(card); } @@ -774,40 +745,6 @@ out: return err; } -/* Move data or a command from the host to the card. */ -static void if_spi_h2c(struct if_spi_card *card, - struct if_spi_packet *packet, int type) -{ - int err = 0; - u16 int_type, port_reg; - - switch (type) { - case MVMS_DAT: - int_type = IF_SPI_CIC_TX_DOWNLOAD_OVER; - port_reg = IF_SPI_DATA_RDWRPORT_REG; - break; - case MVMS_CMD: - int_type = IF_SPI_CIC_CMD_DOWNLOAD_OVER; - port_reg = IF_SPI_CMD_RDWRPORT_REG; - break; - default: - lbs_pr_err("can't transfer buffer of type %d\n", type); - err = -EINVAL; - goto out; - } - - /* Write the data to the card */ - err = spu_write(card, port_reg, packet->buffer, packet->blen); - if (err) - goto out; - -out: - kfree(packet); - - if (err) - lbs_pr_err("%s: error %d\n", __func__, err); -} - /* Inform the host about a card event */ static void if_spi_e2h(struct if_spi_card *card) { @@ -837,8 +774,6 @@ static int lbs_spi_thread(void *data) int err; struct if_spi_card *card = data; u16 hiStatus; - unsigned long flags; - struct if_spi_packet *packet; while (1) { /* Wait to be woken up by one of two things. First, our ISR @@ -877,43 +812,9 @@ static int lbs_spi_thread(void *data) if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY || (card->priv->psstate != PS_STATE_FULL_POWER && (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) { - /* This means two things. First of all, - * if there was a previous command sent, the card has - * successfully received it. - * Secondly, it is now ready to download another - * command. - */ lbs_host_to_card_done(card->priv); - - /* Do we have any command packets from the host to - * send? */ - packet = NULL; - spin_lock_irqsave(&card->buffer_lock, flags); - if (!list_empty(&card->cmd_packet_list)) { - packet = (struct if_spi_packet *)(card-> - cmd_packet_list.next); - list_del(&packet->list); - } - spin_unlock_irqrestore(&card->buffer_lock, flags); - - if (packet) - if_spi_h2c(card, packet, MVMS_CMD); } - if (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY) { - /* Do we have any data packets from the host to - * send? */ - packet = NULL; - spin_lock_irqsave(&card->buffer_lock, flags); - if (!list_empty(&card->data_packet_list)) { - packet = (struct if_spi_packet *)(card-> - data_packet_list.next); - list_del(&packet->list); - } - spin_unlock_irqrestore(&card->buffer_lock, flags); - if (packet) - if_spi_h2c(card, packet, MVMS_DAT); - } if (hiStatus & IF_SPI_HIST_CARD_EVENT) if_spi_e2h(card); @@ -942,40 +843,18 @@ static int if_spi_host_to_card(struct lbs_private *priv, u8 type, u8 *buf, u16 nb) { int err = 0; - unsigned long flags; struct if_spi_card *card = priv->card; - struct if_spi_packet *packet; - u16 blen; lbs_deb_enter_args(LBS_DEB_SPI, "type %d, bytes %d", type, nb); - if (nb == 0) { - lbs_pr_err("%s: invalid size requested: %d\n", __func__, nb); - err = -EINVAL; - goto out; - } - blen = ALIGN(nb, 4); - packet = kzalloc(sizeof(struct if_spi_packet) + blen, GFP_ATOMIC); - if (!packet) { - err = -ENOMEM; - goto out; - } - packet->blen = blen; - memcpy(packet->buffer, buf, nb); - memset(packet->buffer + nb, 0, blen - nb); + nb = ALIGN(nb, 4); switch (type) { case MVMS_CMD: - priv->dnld_sent = DNLD_CMD_SENT; - spin_lock_irqsave(&card->buffer_lock, flags); - list_add_tail(&packet->list, &card->cmd_packet_list); - spin_unlock_irqrestore(&card->buffer_lock, flags); + err = spu_write(card, IF_SPI_CMD_RDWRPORT_REG, buf, nb); break; case MVMS_DAT: - priv->dnld_sent = DNLD_DATA_SENT; - spin_lock_irqsave(&card->buffer_lock, flags); - list_add_tail(&packet->list, &card->data_packet_list); - spin_unlock_irqrestore(&card->buffer_lock, flags); + err = spu_write(card, IF_SPI_DATA_RDWRPORT_REG, buf, nb); break; default: lbs_pr_err("can't transfer buffer of type %d", type); @@ -983,9 +862,6 @@ static int if_spi_host_to_card(struct lbs_private *priv, break; } - /* Wake up the spi thread */ - up(&card->spi_ready); -out: lbs_deb_leave_args(LBS_DEB_SPI, "err=%d", err); return err; } @@ -1062,9 +938,6 @@ static int __devinit if_spi_probe(struct spi_device *spi) sema_init(&card->spi_ready, 0); sema_init(&card->spi_thread_terminated, 0); - INIT_LIST_HEAD(&card->cmd_packet_list); - INIT_LIST_HEAD(&card->data_packet_list); - spin_lock_init(&card->buffer_lock); /* Initialize the SPI Interface Unit */ err = spu_init(card, pdata->use_dummy_writes); @@ -1141,6 +1014,9 @@ static int __devinit if_spi_probe(struct spi_device *spi) goto terminate_thread; } + /* poke the IRQ handler so that we don't miss the first interrupt */ + up(&card->spi_ready); + /* Start the card. * This will call register_netdev, and we'll start * getting interrupts... */ diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 38cfd79e0590..fc4ec48eda12 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -284,7 +284,7 @@ struct mac80211_hwsim_data { struct ieee80211_channel *channel; unsigned long beacon_int; /* in jiffies unit */ unsigned int rx_filter; - int started; + bool started, idle; struct timer_list beacon_timer; enum ps_mode { PS_DISABLED, PS_ENABLED, PS_AUTO_POLL, PS_MANUAL_POLL @@ -365,6 +365,49 @@ static void mac80211_hwsim_monitor_rx(struct ieee80211_hw *hw, } +static void mac80211_hwsim_monitor_ack(struct ieee80211_hw *hw, const u8 *addr) +{ + struct mac80211_hwsim_data *data = hw->priv; + struct sk_buff *skb; + struct hwsim_radiotap_hdr *hdr; + u16 flags; + struct ieee80211_hdr *hdr11; + + if (!netif_running(hwsim_mon)) + return; + + skb = dev_alloc_skb(100); + if (skb == NULL) + return; + + hdr = (struct hwsim_radiotap_hdr *) skb_put(skb, sizeof(*hdr)); + hdr->hdr.it_version = PKTHDR_RADIOTAP_VERSION; + hdr->hdr.it_pad = 0; + hdr->hdr.it_len = cpu_to_le16(sizeof(*hdr)); + hdr->hdr.it_present = cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) | + (1 << IEEE80211_RADIOTAP_CHANNEL)); + hdr->rt_flags = 0; + hdr->rt_rate = 0; + hdr->rt_channel = cpu_to_le16(data->channel->center_freq); + flags = IEEE80211_CHAN_2GHZ; + hdr->rt_chbitmask = cpu_to_le16(flags); + + hdr11 = (struct ieee80211_hdr *) skb_put(skb, 10); + hdr11->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL | + IEEE80211_STYPE_ACK); + hdr11->duration_id = cpu_to_le16(0); + memcpy(hdr11->addr1, addr, ETH_ALEN); + + skb->dev = hwsim_mon; + skb_set_mac_header(skb, 0); + skb->ip_summed = CHECKSUM_UNNECESSARY; + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = htons(ETH_P_802_2); + memset(skb->cb, 0, sizeof(skb->cb)); + netif_rx(skb); +} + + static bool hwsim_ps_rx_ok(struct mac80211_hwsim_data *data, struct sk_buff *skb) { @@ -402,6 +445,12 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_rx_status rx_status; + if (data->idle) { + printk(KERN_DEBUG "%s: Trying to TX when idle - reject\n", + wiphy_name(hw->wiphy)); + return false; + } + memset(&rx_status, 0, sizeof(rx_status)); /* TODO: set mactime */ rx_status.freq = data->channel->center_freq; @@ -428,7 +477,8 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, if (data == data2) continue; - if (!data2->started || !hwsim_ps_rx_ok(data2, skb) || + if (data2->idle || !data2->started || + !hwsim_ps_rx_ok(data2, skb) || !data->channel || !data2->channel || data->channel->center_freq != data2->channel->center_freq || !(data->group & data2->group)) @@ -464,6 +514,10 @@ static int mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb) } ack = mac80211_hwsim_tx_frame(hw, skb); + if (ack && skb->len >= 16) { + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + mac80211_hwsim_monitor_ack(hw, hdr->addr2); + } txi = IEEE80211_SKB_CB(skb); @@ -571,6 +625,8 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) !!(conf->flags & IEEE80211_CONF_IDLE), !!(conf->flags & IEEE80211_CONF_PS)); + data->idle = !!(conf->flags & IEEE80211_CONF_IDLE); + data->channel = conf->channel; if (!data->started || !data->beacon_int) del_timer(&data->beacon_timer); @@ -1045,19 +1101,20 @@ static int __init init_mac80211_hwsim(void) sband->channels = data->channels_2ghz; sband->n_channels = ARRAY_SIZE(hwsim_channels_2ghz); + sband->bitrates = data->rates; + sband->n_bitrates = ARRAY_SIZE(hwsim_rates); break; case IEEE80211_BAND_5GHZ: sband->channels = data->channels_5ghz; sband->n_channels = ARRAY_SIZE(hwsim_channels_5ghz); + sband->bitrates = data->rates + 4; + sband->n_bitrates = ARRAY_SIZE(hwsim_rates) - 4; break; default: break; } - sband->bitrates = data->rates; - sband->n_bitrates = ARRAY_SIZE(hwsim_rates); - sband->ht_cap.ht_supported = true; sband->ht_cap.cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_GRN_FLD | diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 746532ebe5a8..2ebfee4da3fa 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/spinlock.h> #include <linux/list.h> #include <linux/pci.h> @@ -27,18 +28,6 @@ #define MWL8K_NAME KBUILD_MODNAME #define MWL8K_VERSION "0.10" -MODULE_DESCRIPTION(MWL8K_DESC); -MODULE_VERSION(MWL8K_VERSION); -MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com>"); -MODULE_LICENSE("GPL"); - -static DEFINE_PCI_DEVICE_TABLE(mwl8k_table) = { - { PCI_VDEVICE(MARVELL, 0x2a2b), .driver_data = 8687, }, - { PCI_VDEVICE(MARVELL, 0x2a30), .driver_data = 8687, }, - { } -}; -MODULE_DEVICE_TABLE(pci, mwl8k_table); - /* Register definitions */ #define MWL8K_HIU_GEN_PTR 0x00000c10 #define MWL8K_MODE_STA 0x0000005a @@ -88,72 +77,89 @@ MODULE_DEVICE_TABLE(pci, mwl8k_table); MWL8K_A2H_INT_RX_READY | \ MWL8K_A2H_INT_TX_DONE) -/* WME stream classes */ -#define WME_AC_BE 0 /* best effort */ -#define WME_AC_BK 1 /* background */ -#define WME_AC_VI 2 /* video */ -#define WME_AC_VO 3 /* voice */ - #define MWL8K_RX_QUEUES 1 #define MWL8K_TX_QUEUES 4 +struct rxd_ops { + int rxd_size; + void (*rxd_init)(void *rxd, dma_addr_t next_dma_addr); + void (*rxd_refill)(void *rxd, dma_addr_t addr, int len); + int (*rxd_process)(void *rxd, struct ieee80211_rx_status *status); +}; + +struct mwl8k_device_info { + char *part_name; + char *helper_image; + char *fw_image; + struct rxd_ops *rxd_ops; + u16 modes; +}; + struct mwl8k_rx_queue { - int rx_desc_count; + int rxd_count; /* hw receives here */ - int rx_head; + int head; /* refill descs here */ - int rx_tail; + int tail; - struct mwl8k_rx_desc *rx_desc_area; - dma_addr_t rx_desc_dma; - struct sk_buff **rx_skb; + void *rxd; + dma_addr_t rxd_dma; + struct { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(dma) + } *buf; }; struct mwl8k_tx_queue { /* hw transmits here */ - int tx_head; + int head; /* sw appends here */ - int tx_tail; + int tail; - struct ieee80211_tx_queue_stats tx_stats; - struct mwl8k_tx_desc *tx_desc_area; - dma_addr_t tx_desc_dma; - struct sk_buff **tx_skb; + struct ieee80211_tx_queue_stats stats; + struct mwl8k_tx_desc *txd; + dma_addr_t txd_dma; + struct sk_buff **skb; }; /* Pointers to the firmware data and meta information about it. */ struct mwl8k_firmware { - /* Microcode */ - struct firmware *ucode; - /* Boot helper code */ struct firmware *helper; + + /* Microcode */ + struct firmware *ucode; }; struct mwl8k_priv { + void __iomem *sram; void __iomem *regs; struct ieee80211_hw *hw; struct pci_dev *pdev; - u8 name[16]; + + struct mwl8k_device_info *device_info; + bool ap_fw; + struct rxd_ops *rxd_ops; /* firmware files and meta data */ struct mwl8k_firmware fw; - u32 part_num; /* firmware access */ struct mutex fw_mutex; struct task_struct *fw_mutex_owner; int fw_mutex_depth; - struct completion *tx_wait; struct completion *hostcmd_wait; /* lock held over TX and TX reap */ spinlock_t tx_lock; + /* TX quiesce completion, protected by fw_mutex and tx_lock */ + struct completion *tx_wait; + struct ieee80211_vif *vif; struct ieee80211_channel *current_channel; @@ -178,10 +184,11 @@ struct mwl8k_priv { /* PHY parameters */ struct ieee80211_supported_band band; struct ieee80211_channel channels[14]; - struct ieee80211_rate rates[12]; + struct ieee80211_rate rates[13]; bool radio_on; bool radio_short_preamble; + bool sniffer_enabled; bool wmm_enabled; /* XXX need to convert this to handle multiple interfaces */ @@ -199,9 +206,6 @@ struct mwl8k_priv { /* Tasklet to reclaim TX descriptors and buffers after tx */ struct tasklet_struct tx_reclaim_task; - - /* Work thread to serialize configuration requests */ - struct workqueue_struct *config_wq; }; /* Per interface specific private data */ @@ -220,7 +224,7 @@ struct mwl8k_vif { * Subset of supported legacy rates. * Intersection of AP and STA supported rates. */ - struct ieee80211_rate legacy_rates[12]; + struct ieee80211_rate legacy_rates[13]; /* number of supported legacy rates */ u8 legacy_nrates; @@ -252,9 +256,10 @@ static const struct ieee80211_rate mwl8k_rates[] = { { .bitrate = 10, .hw_value = 2, }, { .bitrate = 20, .hw_value = 4, }, { .bitrate = 55, .hw_value = 11, }, + { .bitrate = 110, .hw_value = 22, }, + { .bitrate = 220, .hw_value = 44, }, { .bitrate = 60, .hw_value = 12, }, { .bitrate = 90, .hw_value = 18, }, - { .bitrate = 110, .hw_value = 22, }, { .bitrate = 120, .hw_value = 24, }, { .bitrate = 180, .hw_value = 36, }, { .bitrate = 240, .hw_value = 48, }, @@ -270,10 +275,12 @@ static const struct ieee80211_rate mwl8k_rates[] = { /* Firmware command codes */ #define MWL8K_CMD_CODE_DNLD 0x0001 #define MWL8K_CMD_GET_HW_SPEC 0x0003 +#define MWL8K_CMD_SET_HW_SPEC 0x0004 #define MWL8K_CMD_MAC_MULTICAST_ADR 0x0010 #define MWL8K_CMD_GET_STAT 0x0014 #define MWL8K_CMD_RADIO_CONTROL 0x001c #define MWL8K_CMD_RF_TX_POWER 0x001e +#define MWL8K_CMD_RF_ANTENNA 0x0020 #define MWL8K_CMD_SET_PRE_SCAN 0x0107 #define MWL8K_CMD_SET_POST_SCAN 0x0108 #define MWL8K_CMD_SET_RF_CHANNEL 0x010a @@ -287,6 +294,7 @@ static const struct ieee80211_rate mwl8k_rates[] = { #define MWL8K_CMD_MIMO_CONFIG 0x0125 #define MWL8K_CMD_USE_FIXED_RATE 0x0126 #define MWL8K_CMD_ENABLE_SNIFFER 0x0150 +#define MWL8K_CMD_SET_MAC_ADDR 0x0202 #define MWL8K_CMD_SET_RATEADAPT_MODE 0x0203 #define MWL8K_CMD_UPDATE_STADB 0x1123 @@ -299,10 +307,12 @@ static const char *mwl8k_cmd_name(u16 cmd, char *buf, int bufsize) switch (cmd & ~0x8000) { MWL8K_CMDNAME(CODE_DNLD); MWL8K_CMDNAME(GET_HW_SPEC); + MWL8K_CMDNAME(SET_HW_SPEC); MWL8K_CMDNAME(MAC_MULTICAST_ADR); MWL8K_CMDNAME(GET_STAT); MWL8K_CMDNAME(RADIO_CONTROL); MWL8K_CMDNAME(RF_TX_POWER); + MWL8K_CMDNAME(RF_ANTENNA); MWL8K_CMDNAME(SET_PRE_SCAN); MWL8K_CMDNAME(SET_POST_SCAN); MWL8K_CMDNAME(SET_RF_CHANNEL); @@ -316,6 +326,7 @@ static const char *mwl8k_cmd_name(u16 cmd, char *buf, int bufsize) MWL8K_CMDNAME(MIMO_CONFIG); MWL8K_CMDNAME(USE_FIXED_RATE); MWL8K_CMDNAME(ENABLE_SNIFFER); + MWL8K_CMDNAME(SET_MAC_ADDR); MWL8K_CMDNAME(SET_RATEADAPT_MODE); MWL8K_CMDNAME(UPDATE_STADB); default: @@ -353,41 +364,35 @@ static void mwl8k_release_firmware(struct mwl8k_priv *priv) /* Request fw image */ static int mwl8k_request_fw(struct mwl8k_priv *priv, - const char *fname, struct firmware **fw) + const char *fname, struct firmware **fw) { /* release current image */ if (*fw != NULL) mwl8k_release_fw(fw); return request_firmware((const struct firmware **)fw, - fname, &priv->pdev->dev); + fname, &priv->pdev->dev); } -static int mwl8k_request_firmware(struct mwl8k_priv *priv, u32 part_num) +static int mwl8k_request_firmware(struct mwl8k_priv *priv) { - u8 filename[64]; + struct mwl8k_device_info *di = priv->device_info; int rc; - priv->part_num = part_num; - - snprintf(filename, sizeof(filename), - "mwl8k/helper_%u.fw", priv->part_num); - - rc = mwl8k_request_fw(priv, filename, &priv->fw.helper); - if (rc) { - printk(KERN_ERR - "%s Error requesting helper firmware file %s\n", - pci_name(priv->pdev), filename); - return rc; + if (di->helper_image != NULL) { + rc = mwl8k_request_fw(priv, di->helper_image, &priv->fw.helper); + if (rc) { + printk(KERN_ERR "%s: Error requesting helper " + "firmware file %s\n", pci_name(priv->pdev), + di->helper_image); + return rc; + } } - snprintf(filename, sizeof(filename), - "mwl8k/fmimage_%u.fw", priv->part_num); - - rc = mwl8k_request_fw(priv, filename, &priv->fw.ucode); + rc = mwl8k_request_fw(priv, di->fw_image, &priv->fw.ucode); if (rc) { - printk(KERN_ERR "%s Error requesting firmware file %s\n", - pci_name(priv->pdev), filename); + printk(KERN_ERR "%s: Error requesting firmware file %s\n", + pci_name(priv->pdev), di->fw_image); mwl8k_release_fw(&priv->fw.helper); return rc; } @@ -434,6 +439,7 @@ mwl8k_send_fw_load_cmd(struct mwl8k_priv *priv, void *data, int length) break; } + cond_resched(); udelay(1); } while (--loops); @@ -542,43 +548,62 @@ static int mwl8k_feed_fw_image(struct mwl8k_priv *priv, return rc; } -static int mwl8k_load_firmware(struct mwl8k_priv *priv) +static int mwl8k_load_firmware(struct ieee80211_hw *hw) { - int loops, rc; + struct mwl8k_priv *priv = hw->priv; + struct firmware *fw = priv->fw.ucode; + struct mwl8k_device_info *di = priv->device_info; + int rc; + int loops; + + if (!memcmp(fw->data, "\x01\x00\x00\x00", 4)) { + struct firmware *helper = priv->fw.helper; - const u8 *ucode = priv->fw.ucode->data; - size_t ucode_len = priv->fw.ucode->size; - const u8 *helper = priv->fw.helper->data; - size_t helper_len = priv->fw.helper->size; + if (helper == NULL) { + printk(KERN_ERR "%s: helper image needed but none " + "given\n", pci_name(priv->pdev)); + return -EINVAL; + } - if (!memcmp(ucode, "\x01\x00\x00\x00", 4)) { - rc = mwl8k_load_fw_image(priv, helper, helper_len); + rc = mwl8k_load_fw_image(priv, helper->data, helper->size); if (rc) { printk(KERN_ERR "%s: unable to load firmware " - "helper image\n", pci_name(priv->pdev)); + "helper image\n", pci_name(priv->pdev)); return rc; } msleep(1); - rc = mwl8k_feed_fw_image(priv, ucode, ucode_len); + rc = mwl8k_feed_fw_image(priv, fw->data, fw->size); } else { - rc = mwl8k_load_fw_image(priv, ucode, ucode_len); + rc = mwl8k_load_fw_image(priv, fw->data, fw->size); } if (rc) { - printk(KERN_ERR "%s: unable to load firmware data\n", - pci_name(priv->pdev)); + printk(KERN_ERR "%s: unable to load firmware image\n", + pci_name(priv->pdev)); return rc; } - iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR); + if (di->modes & BIT(NL80211_IFTYPE_AP)) + iowrite32(MWL8K_MODE_AP, priv->regs + MWL8K_HIU_GEN_PTR); + else + iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR); msleep(1); loops = 200000; do { - if (ioread32(priv->regs + MWL8K_HIU_INT_CODE) - == MWL8K_FWSTA_READY) + u32 ready_code; + + ready_code = ioread32(priv->regs + MWL8K_HIU_INT_CODE); + if (ready_code == MWL8K_FWAP_READY) { + priv->ap_fw = 1; break; + } else if (ready_code == MWL8K_FWSTA_READY) { + priv->ap_fw = 0; + break; + } + + cond_resched(); udelay(1); } while (--loops); @@ -605,7 +630,7 @@ struct ewc_ht_info { /* Peer Entry flags - used to define the type of the peer node */ #define MWL8K_PEER_TYPE_ACCESSPOINT 2 -#define MWL8K_IEEE_LEGACY_DATA_RATES 12 +#define MWL8K_IEEE_LEGACY_DATA_RATES 13 #define MWL8K_MCS_BITMAP_SIZE 16 struct peer_capability_info { @@ -731,16 +756,96 @@ static inline void mwl8k_add_dma_header(struct sk_buff *skb) /* - * Packet reception. + * Packet reception for 88w8366. */ -#define MWL8K_RX_CTRL_OWNED_BY_HOST 0x02 +struct mwl8k_rxd_8366 { + __le16 pkt_len; + __u8 sq2; + __u8 rate; + __le32 pkt_phys_addr; + __le32 next_rxd_phys_addr; + __le16 qos_control; + __le16 htsig2; + __le32 hw_rssi_info; + __le32 hw_noise_floor_info; + __u8 noise_floor; + __u8 pad0[3]; + __u8 rssi; + __u8 rx_status; + __u8 channel; + __u8 rx_ctrl; +} __attribute__((packed)); -struct mwl8k_rx_desc { +#define MWL8K_8366_RX_CTRL_OWNED_BY_HOST 0x80 + +static void mwl8k_rxd_8366_init(void *_rxd, dma_addr_t next_dma_addr) +{ + struct mwl8k_rxd_8366 *rxd = _rxd; + + rxd->next_rxd_phys_addr = cpu_to_le32(next_dma_addr); + rxd->rx_ctrl = MWL8K_8366_RX_CTRL_OWNED_BY_HOST; +} + +static void mwl8k_rxd_8366_refill(void *_rxd, dma_addr_t addr, int len) +{ + struct mwl8k_rxd_8366 *rxd = _rxd; + + rxd->pkt_len = cpu_to_le16(len); + rxd->pkt_phys_addr = cpu_to_le32(addr); + wmb(); + rxd->rx_ctrl = 0; +} + +static int +mwl8k_rxd_8366_process(void *_rxd, struct ieee80211_rx_status *status) +{ + struct mwl8k_rxd_8366 *rxd = _rxd; + + if (!(rxd->rx_ctrl & MWL8K_8366_RX_CTRL_OWNED_BY_HOST)) + return -1; + rmb(); + + memset(status, 0, sizeof(*status)); + + status->signal = -rxd->rssi; + status->noise = -rxd->noise_floor; + + if (rxd->rate & 0x80) { + status->flag |= RX_FLAG_HT; + status->rate_idx = rxd->rate & 0x7f; + } else { + int i; + + for (i = 0; i < ARRAY_SIZE(mwl8k_rates); i++) { + if (mwl8k_rates[i].hw_value == rxd->rate) { + status->rate_idx = i; + break; + } + } + } + + status->band = IEEE80211_BAND_2GHZ; + status->freq = ieee80211_channel_to_frequency(rxd->channel); + + return le16_to_cpu(rxd->pkt_len); +} + +static struct rxd_ops rxd_8366_ops = { + .rxd_size = sizeof(struct mwl8k_rxd_8366), + .rxd_init = mwl8k_rxd_8366_init, + .rxd_refill = mwl8k_rxd_8366_refill, + .rxd_process = mwl8k_rxd_8366_process, +}; + +/* + * Packet reception for 88w8687. + */ +struct mwl8k_rxd_8687 { __le16 pkt_len; __u8 link_quality; __u8 noise_level; __le32 pkt_phys_addr; - __le32 next_rx_desc_phys_addr; + __le32 next_rxd_phys_addr; __le16 qos_control; __le16 rate_info; __le32 pad0[4]; @@ -752,6 +857,76 @@ struct mwl8k_rx_desc { __u8 pad2[2]; } __attribute__((packed)); +#define MWL8K_8687_RATE_INFO_SHORTPRE 0x8000 +#define MWL8K_8687_RATE_INFO_ANTSELECT(x) (((x) >> 11) & 0x3) +#define MWL8K_8687_RATE_INFO_RATEID(x) (((x) >> 3) & 0x3f) +#define MWL8K_8687_RATE_INFO_40MHZ 0x0004 +#define MWL8K_8687_RATE_INFO_SHORTGI 0x0002 +#define MWL8K_8687_RATE_INFO_MCS_FORMAT 0x0001 + +#define MWL8K_8687_RX_CTRL_OWNED_BY_HOST 0x02 + +static void mwl8k_rxd_8687_init(void *_rxd, dma_addr_t next_dma_addr) +{ + struct mwl8k_rxd_8687 *rxd = _rxd; + + rxd->next_rxd_phys_addr = cpu_to_le32(next_dma_addr); + rxd->rx_ctrl = MWL8K_8687_RX_CTRL_OWNED_BY_HOST; +} + +static void mwl8k_rxd_8687_refill(void *_rxd, dma_addr_t addr, int len) +{ + struct mwl8k_rxd_8687 *rxd = _rxd; + + rxd->pkt_len = cpu_to_le16(len); + rxd->pkt_phys_addr = cpu_to_le32(addr); + wmb(); + rxd->rx_ctrl = 0; +} + +static int +mwl8k_rxd_8687_process(void *_rxd, struct ieee80211_rx_status *status) +{ + struct mwl8k_rxd_8687 *rxd = _rxd; + u16 rate_info; + + if (!(rxd->rx_ctrl & MWL8K_8687_RX_CTRL_OWNED_BY_HOST)) + return -1; + rmb(); + + rate_info = le16_to_cpu(rxd->rate_info); + + memset(status, 0, sizeof(*status)); + + status->signal = -rxd->rssi; + status->noise = -rxd->noise_level; + status->qual = rxd->link_quality; + status->antenna = MWL8K_8687_RATE_INFO_ANTSELECT(rate_info); + status->rate_idx = MWL8K_8687_RATE_INFO_RATEID(rate_info); + + if (rate_info & MWL8K_8687_RATE_INFO_SHORTPRE) + status->flag |= RX_FLAG_SHORTPRE; + if (rate_info & MWL8K_8687_RATE_INFO_40MHZ) + status->flag |= RX_FLAG_40MHZ; + if (rate_info & MWL8K_8687_RATE_INFO_SHORTGI) + status->flag |= RX_FLAG_SHORT_GI; + if (rate_info & MWL8K_8687_RATE_INFO_MCS_FORMAT) + status->flag |= RX_FLAG_HT; + + status->band = IEEE80211_BAND_2GHZ; + status->freq = ieee80211_channel_to_frequency(rxd->channel); + + return le16_to_cpu(rxd->pkt_len); +} + +static struct rxd_ops rxd_8687_ops = { + .rxd_size = sizeof(struct mwl8k_rxd_8687), + .rxd_init = mwl8k_rxd_8687_init, + .rxd_refill = mwl8k_rxd_8687_refill, + .rxd_process = mwl8k_rxd_8687_process, +}; + + #define MWL8K_RX_DESCS 256 #define MWL8K_RX_MAXSZ 3800 @@ -762,43 +937,44 @@ static int mwl8k_rxq_init(struct ieee80211_hw *hw, int index) int size; int i; - rxq->rx_desc_count = 0; - rxq->rx_head = 0; - rxq->rx_tail = 0; + rxq->rxd_count = 0; + rxq->head = 0; + rxq->tail = 0; - size = MWL8K_RX_DESCS * sizeof(struct mwl8k_rx_desc); + size = MWL8K_RX_DESCS * priv->rxd_ops->rxd_size; - rxq->rx_desc_area = - pci_alloc_consistent(priv->pdev, size, &rxq->rx_desc_dma); - if (rxq->rx_desc_area == NULL) { + rxq->rxd = pci_alloc_consistent(priv->pdev, size, &rxq->rxd_dma); + if (rxq->rxd == NULL) { printk(KERN_ERR "%s: failed to alloc RX descriptors\n", - priv->name); + wiphy_name(hw->wiphy)); return -ENOMEM; } - memset(rxq->rx_desc_area, 0, size); + memset(rxq->rxd, 0, size); - rxq->rx_skb = kmalloc(MWL8K_RX_DESCS * - sizeof(*rxq->rx_skb), GFP_KERNEL); - if (rxq->rx_skb == NULL) { + rxq->buf = kmalloc(MWL8K_RX_DESCS * sizeof(*rxq->buf), GFP_KERNEL); + if (rxq->buf == NULL) { printk(KERN_ERR "%s: failed to alloc RX skbuff list\n", - priv->name); - pci_free_consistent(priv->pdev, size, - rxq->rx_desc_area, rxq->rx_desc_dma); + wiphy_name(hw->wiphy)); + pci_free_consistent(priv->pdev, size, rxq->rxd, rxq->rxd_dma); return -ENOMEM; } - memset(rxq->rx_skb, 0, MWL8K_RX_DESCS * sizeof(*rxq->rx_skb)); + memset(rxq->buf, 0, MWL8K_RX_DESCS * sizeof(*rxq->buf)); for (i = 0; i < MWL8K_RX_DESCS; i++) { - struct mwl8k_rx_desc *rx_desc; + int desc_size; + void *rxd; int nexti; + dma_addr_t next_dma_addr; - rx_desc = rxq->rx_desc_area + i; - nexti = (i + 1) % MWL8K_RX_DESCS; + desc_size = priv->rxd_ops->rxd_size; + rxd = rxq->rxd + (i * priv->rxd_ops->rxd_size); - rx_desc->next_rx_desc_phys_addr = - cpu_to_le32(rxq->rx_desc_dma - + nexti * sizeof(*rx_desc)); - rx_desc->rx_ctrl = MWL8K_RX_CTRL_OWNED_BY_HOST; + nexti = i + 1; + if (nexti == MWL8K_RX_DESCS) + nexti = 0; + next_dma_addr = rxq->rxd_dma + (nexti * desc_size); + + priv->rxd_ops->rxd_init(rxd, next_dma_addr); } return 0; @@ -811,27 +987,28 @@ static int rxq_refill(struct ieee80211_hw *hw, int index, int limit) int refilled; refilled = 0; - while (rxq->rx_desc_count < MWL8K_RX_DESCS && limit--) { + while (rxq->rxd_count < MWL8K_RX_DESCS && limit--) { struct sk_buff *skb; + dma_addr_t addr; int rx; + void *rxd; skb = dev_alloc_skb(MWL8K_RX_MAXSZ); if (skb == NULL) break; - rxq->rx_desc_count++; - - rx = rxq->rx_tail; - rxq->rx_tail = (rx + 1) % MWL8K_RX_DESCS; + addr = pci_map_single(priv->pdev, skb->data, + MWL8K_RX_MAXSZ, DMA_FROM_DEVICE); - rxq->rx_desc_area[rx].pkt_phys_addr = - cpu_to_le32(pci_map_single(priv->pdev, skb->data, - MWL8K_RX_MAXSZ, DMA_FROM_DEVICE)); + rxq->rxd_count++; + rx = rxq->tail++; + if (rxq->tail == MWL8K_RX_DESCS) + rxq->tail = 0; + rxq->buf[rx].skb = skb; + pci_unmap_addr_set(&rxq->buf[rx], dma, addr); - rxq->rx_desc_area[rx].pkt_len = cpu_to_le16(MWL8K_RX_MAXSZ); - rxq->rx_skb[rx] = skb; - wmb(); - rxq->rx_desc_area[rx].rx_ctrl = 0; + rxd = rxq->rxd + (rx * priv->rxd_ops->rxd_size); + priv->rxd_ops->rxd_refill(rxd, addr, MWL8K_RX_MAXSZ); refilled++; } @@ -847,24 +1024,24 @@ static void mwl8k_rxq_deinit(struct ieee80211_hw *hw, int index) int i; for (i = 0; i < MWL8K_RX_DESCS; i++) { - if (rxq->rx_skb[i] != NULL) { - unsigned long addr; - - addr = le32_to_cpu(rxq->rx_desc_area[i].pkt_phys_addr); - pci_unmap_single(priv->pdev, addr, MWL8K_RX_MAXSZ, - PCI_DMA_FROMDEVICE); - kfree_skb(rxq->rx_skb[i]); - rxq->rx_skb[i] = NULL; + if (rxq->buf[i].skb != NULL) { + pci_unmap_single(priv->pdev, + pci_unmap_addr(&rxq->buf[i], dma), + MWL8K_RX_MAXSZ, PCI_DMA_FROMDEVICE); + pci_unmap_addr_set(&rxq->buf[i], dma, 0); + + kfree_skb(rxq->buf[i].skb); + rxq->buf[i].skb = NULL; } } - kfree(rxq->rx_skb); - rxq->rx_skb = NULL; + kfree(rxq->buf); + rxq->buf = NULL; pci_free_consistent(priv->pdev, - MWL8K_RX_DESCS * sizeof(struct mwl8k_rx_desc), - rxq->rx_desc_area, rxq->rx_desc_dma); - rxq->rx_desc_area = NULL; + MWL8K_RX_DESCS * priv->rxd_ops->rxd_size, + rxq->rxd, rxq->rxd_dma); + rxq->rxd = NULL; } @@ -880,9 +1057,11 @@ mwl8k_capture_bssid(struct mwl8k_priv *priv, struct ieee80211_hdr *wh) !compare_ether_addr(wh->addr3, priv->capture_bssid); } -static inline void mwl8k_save_beacon(struct mwl8k_priv *priv, - struct sk_buff *skb) +static inline void mwl8k_save_beacon(struct ieee80211_hw *hw, + struct sk_buff *skb) { + struct mwl8k_priv *priv = hw->priv; + priv->capture_beacon = false; memset(priv->capture_bssid, 0, ETH_ALEN); @@ -893,8 +1072,7 @@ static inline void mwl8k_save_beacon(struct mwl8k_priv *priv, */ priv->beacon_skb = skb_copy(skb, GFP_ATOMIC); if (priv->beacon_skb != NULL) - queue_work(priv->config_wq, - &priv->finalize_join_worker); + ieee80211_queue_work(hw, &priv->finalize_join_worker); } static int rxq_process(struct ieee80211_hw *hw, int index, int limit) @@ -904,53 +1082,46 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit) int processed; processed = 0; - while (rxq->rx_desc_count && limit--) { - struct mwl8k_rx_desc *rx_desc; + while (rxq->rxd_count && limit--) { struct sk_buff *skb; + void *rxd; + int pkt_len; struct ieee80211_rx_status status; - unsigned long addr; - struct ieee80211_hdr *wh; - rx_desc = rxq->rx_desc_area + rxq->rx_head; - if (!(rx_desc->rx_ctrl & MWL8K_RX_CTRL_OWNED_BY_HOST)) + skb = rxq->buf[rxq->head].skb; + if (skb == NULL) break; - rmb(); - skb = rxq->rx_skb[rxq->rx_head]; - if (skb == NULL) + rxd = rxq->rxd + (rxq->head * priv->rxd_ops->rxd_size); + + pkt_len = priv->rxd_ops->rxd_process(rxd, &status); + if (pkt_len < 0) break; - rxq->rx_skb[rxq->rx_head] = NULL; - rxq->rx_head = (rxq->rx_head + 1) % MWL8K_RX_DESCS; - rxq->rx_desc_count--; + rxq->buf[rxq->head].skb = NULL; - addr = le32_to_cpu(rx_desc->pkt_phys_addr); - pci_unmap_single(priv->pdev, addr, - MWL8K_RX_MAXSZ, PCI_DMA_FROMDEVICE); + pci_unmap_single(priv->pdev, + pci_unmap_addr(&rxq->buf[rxq->head], dma), + MWL8K_RX_MAXSZ, PCI_DMA_FROMDEVICE); + pci_unmap_addr_set(&rxq->buf[rxq->head], dma, 0); - skb_put(skb, le16_to_cpu(rx_desc->pkt_len)); - mwl8k_remove_dma_header(skb); + rxq->head++; + if (rxq->head == MWL8K_RX_DESCS) + rxq->head = 0; + + rxq->rxd_count--; - wh = (struct ieee80211_hdr *)skb->data; + skb_put(skb, pkt_len); + mwl8k_remove_dma_header(skb); /* - * Check for pending join operation. save a copy of - * the beacon and schedule a tasklet to send finalize - * join command to the firmware. + * Check for a pending join operation. Save a + * copy of the beacon and schedule a tasklet to + * send a FINALIZE_JOIN command to the firmware. */ - if (mwl8k_capture_bssid(priv, wh)) - mwl8k_save_beacon(priv, skb); - - memset(&status, 0, sizeof(status)); - status.mactime = 0; - status.signal = -rx_desc->rssi; - status.noise = -rx_desc->noise_level; - status.qual = rx_desc->link_quality; - status.antenna = 1; - status.rate_idx = 1; - status.flag = 0; - status.band = IEEE80211_BAND_2GHZ; - status.freq = ieee80211_channel_to_frequency(rx_desc->channel); + if (mwl8k_capture_bssid(priv, (void *)skb->data)) + mwl8k_save_beacon(hw, skb); + memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status)); ieee80211_rx_irqsafe(hw, skb); @@ -965,24 +1136,10 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit) * Packet transmission. */ -/* Transmit queue assignment. */ -enum { - MWL8K_WME_AC_BK = 0, /* background access */ - MWL8K_WME_AC_BE = 1, /* best effort access */ - MWL8K_WME_AC_VI = 2, /* video access */ - MWL8K_WME_AC_VO = 3, /* voice access */ -}; - /* Transmit packet ACK policy */ #define MWL8K_TXD_ACK_POLICY_NORMAL 0 #define MWL8K_TXD_ACK_POLICY_BLOCKACK 3 -#define GET_TXQ(_ac) (\ - ((_ac) == WME_AC_VO) ? MWL8K_WME_AC_VO : \ - ((_ac) == WME_AC_VI) ? MWL8K_WME_AC_VI : \ - ((_ac) == WME_AC_BK) ? MWL8K_WME_AC_BK : \ - MWL8K_WME_AC_BE) - #define MWL8K_TXD_STATUS_OK 0x00000001 #define MWL8K_TXD_STATUS_OK_RETRY 0x00000002 #define MWL8K_TXD_STATUS_OK_MORE_RETRY 0x00000004 @@ -997,7 +1154,7 @@ struct mwl8k_tx_desc { __le32 pkt_phys_addr; __le16 pkt_len; __u8 dest_MAC_addr[ETH_ALEN]; - __le32 next_tx_desc_phys_addr; + __le32 next_txd_phys_addr; __le32 reserved; __le16 rate_info; __u8 peer_id; @@ -1013,44 +1170,40 @@ static int mwl8k_txq_init(struct ieee80211_hw *hw, int index) int size; int i; - memset(&txq->tx_stats, 0, sizeof(struct ieee80211_tx_queue_stats)); - txq->tx_stats.limit = MWL8K_TX_DESCS; - txq->tx_head = 0; - txq->tx_tail = 0; + memset(&txq->stats, 0, sizeof(struct ieee80211_tx_queue_stats)); + txq->stats.limit = MWL8K_TX_DESCS; + txq->head = 0; + txq->tail = 0; size = MWL8K_TX_DESCS * sizeof(struct mwl8k_tx_desc); - txq->tx_desc_area = - pci_alloc_consistent(priv->pdev, size, &txq->tx_desc_dma); - if (txq->tx_desc_area == NULL) { + txq->txd = pci_alloc_consistent(priv->pdev, size, &txq->txd_dma); + if (txq->txd == NULL) { printk(KERN_ERR "%s: failed to alloc TX descriptors\n", - priv->name); + wiphy_name(hw->wiphy)); return -ENOMEM; } - memset(txq->tx_desc_area, 0, size); + memset(txq->txd, 0, size); - txq->tx_skb = kmalloc(MWL8K_TX_DESCS * sizeof(*txq->tx_skb), - GFP_KERNEL); - if (txq->tx_skb == NULL) { + txq->skb = kmalloc(MWL8K_TX_DESCS * sizeof(*txq->skb), GFP_KERNEL); + if (txq->skb == NULL) { printk(KERN_ERR "%s: failed to alloc TX skbuff list\n", - priv->name); - pci_free_consistent(priv->pdev, size, - txq->tx_desc_area, txq->tx_desc_dma); + wiphy_name(hw->wiphy)); + pci_free_consistent(priv->pdev, size, txq->txd, txq->txd_dma); return -ENOMEM; } - memset(txq->tx_skb, 0, MWL8K_TX_DESCS * sizeof(*txq->tx_skb)); + memset(txq->skb, 0, MWL8K_TX_DESCS * sizeof(*txq->skb)); for (i = 0; i < MWL8K_TX_DESCS; i++) { struct mwl8k_tx_desc *tx_desc; int nexti; - tx_desc = txq->tx_desc_area + i; + tx_desc = txq->txd + i; nexti = (i + 1) % MWL8K_TX_DESCS; tx_desc->status = 0; - tx_desc->next_tx_desc_phys_addr = - cpu_to_le32(txq->tx_desc_dma + - nexti * sizeof(*tx_desc)); + tx_desc->next_txd_phys_addr = + cpu_to_le32(txq->txd_dma + nexti * sizeof(*tx_desc)); } return 0; @@ -1065,11 +1218,6 @@ static inline void mwl8k_tx_start(struct mwl8k_priv *priv) ioread32(priv->regs + MWL8K_HIU_INT_CODE); } -static inline int mwl8k_txq_busy(struct mwl8k_priv *priv) -{ - return priv->pending_tx_pkts; -} - struct mwl8k_txq_info { u32 fw_owned; u32 drv_owned; @@ -1089,14 +1237,13 @@ static int mwl8k_scan_tx_ring(struct mwl8k_priv *priv, memset(txinfo, 0, MWL8K_TX_QUEUES * sizeof(struct mwl8k_txq_info)); - spin_lock_bh(&priv->tx_lock); for (count = 0; count < MWL8K_TX_QUEUES; count++) { txq = priv->txq + count; - txinfo[count].len = txq->tx_stats.len; - txinfo[count].head = txq->tx_head; - txinfo[count].tail = txq->tx_tail; + txinfo[count].len = txq->stats.len; + txinfo[count].head = txq->head; + txinfo[count].tail = txq->tail; for (desc = 0; desc < MWL8K_TX_DESCS; desc++) { - tx_desc = txq->tx_desc_area + desc; + tx_desc = txq->txd + desc; status = le32_to_cpu(tx_desc->status); if (status & MWL8K_TXD_STATUS_FW_OWNED) @@ -1108,30 +1255,26 @@ static int mwl8k_scan_tx_ring(struct mwl8k_priv *priv, txinfo[count].unused++; } } - spin_unlock_bh(&priv->tx_lock); return ndescs; } /* - * Must be called with hw->fw_mutex held and tx queues stopped. + * Must be called with priv->fw_mutex held and tx queues stopped. */ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw) { struct mwl8k_priv *priv = hw->priv; - DECLARE_COMPLETION_ONSTACK(cmd_wait); + DECLARE_COMPLETION_ONSTACK(tx_wait); u32 count; unsigned long timeout; might_sleep(); spin_lock_bh(&priv->tx_lock); - count = mwl8k_txq_busy(priv); - if (count) { - priv->tx_wait = &cmd_wait; - if (priv->radio_on) - mwl8k_tx_start(priv); - } + count = priv->pending_tx_pkts; + if (count) + priv->tx_wait = &tx_wait; spin_unlock_bh(&priv->tx_lock); if (count) { @@ -1139,23 +1282,23 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw) int index; int newcount; - timeout = wait_for_completion_timeout(&cmd_wait, + timeout = wait_for_completion_timeout(&tx_wait, msecs_to_jiffies(5000)); if (timeout) return 0; spin_lock_bh(&priv->tx_lock); priv->tx_wait = NULL; - newcount = mwl8k_txq_busy(priv); + newcount = priv->pending_tx_pkts; + mwl8k_scan_tx_ring(priv, txinfo); spin_unlock_bh(&priv->tx_lock); printk(KERN_ERR "%s(%u) TIMEDOUT:5000ms Pend:%u-->%u\n", __func__, __LINE__, count, newcount); - mwl8k_scan_tx_ring(priv, txinfo); for (index = 0; index < MWL8K_TX_QUEUES; index++) - printk(KERN_ERR - "TXQ:%u L:%u H:%u T:%u FW:%u DRV:%u U:%u\n", + printk(KERN_ERR "TXQ:%u L:%u H:%u T:%u FW:%u " + "DRV:%u U:%u\n", index, txinfo[index].len, txinfo[index].head, @@ -1181,7 +1324,7 @@ static void mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int force) struct mwl8k_tx_queue *txq = priv->txq + index; int wake = 0; - while (txq->tx_stats.len > 0) { + while (txq->stats.len > 0) { int tx; struct mwl8k_tx_desc *tx_desc; unsigned long addr; @@ -1190,8 +1333,8 @@ static void mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int force) struct ieee80211_tx_info *info; u32 status; - tx = txq->tx_head; - tx_desc = txq->tx_desc_area + tx; + tx = txq->head; + tx_desc = txq->txd + tx; status = le32_to_cpu(tx_desc->status); @@ -1202,15 +1345,15 @@ static void mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int force) ~cpu_to_le32(MWL8K_TXD_STATUS_FW_OWNED); } - txq->tx_head = (tx + 1) % MWL8K_TX_DESCS; - BUG_ON(txq->tx_stats.len == 0); - txq->tx_stats.len--; + txq->head = (tx + 1) % MWL8K_TX_DESCS; + BUG_ON(txq->stats.len == 0); + txq->stats.len--; priv->pending_tx_pkts--; addr = le32_to_cpu(tx_desc->pkt_phys_addr); size = le16_to_cpu(tx_desc->pkt_len); - skb = txq->tx_skb[tx]; - txq->tx_skb[tx] = NULL; + skb = txq->skb[tx]; + txq->skb[tx] = NULL; BUG_ON(skb == NULL); pci_unmap_single(priv->pdev, addr, size, PCI_DMA_TODEVICE); @@ -1243,13 +1386,13 @@ static void mwl8k_txq_deinit(struct ieee80211_hw *hw, int index) mwl8k_txq_reclaim(hw, index, 1); - kfree(txq->tx_skb); - txq->tx_skb = NULL; + kfree(txq->skb); + txq->skb = NULL; pci_free_consistent(priv->pdev, MWL8K_TX_DESCS * sizeof(struct mwl8k_tx_desc), - txq->tx_desc_area, txq->tx_desc_dma); - txq->tx_desc_area = NULL; + txq->txd, txq->txd_dma); + txq->txd = NULL; } static int @@ -1317,7 +1460,7 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb) if (pci_dma_mapping_error(priv->pdev, dma)) { printk(KERN_DEBUG "%s: failed to dma map skb, " - "dropping TX frame.\n", priv->name); + "dropping TX frame.\n", wiphy_name(hw->wiphy)); dev_kfree_skb(skb); return NETDEV_TX_OK; } @@ -1326,10 +1469,10 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb) txq = priv->txq + index; - BUG_ON(txq->tx_skb[txq->tx_tail] != NULL); - txq->tx_skb[txq->tx_tail] = skb; + BUG_ON(txq->skb[txq->tail] != NULL); + txq->skb[txq->tail] = skb; - tx = txq->tx_desc_area + txq->tx_tail; + tx = txq->txd + txq->tail; tx->data_rate = txdatarate; tx->tx_priority = index; tx->qos_control = cpu_to_le16(qos); @@ -1340,15 +1483,15 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb) wmb(); tx->status = cpu_to_le32(MWL8K_TXD_STATUS_FW_OWNED | txstatus); - txq->tx_stats.count++; - txq->tx_stats.len++; + txq->stats.count++; + txq->stats.len++; priv->pending_tx_pkts++; - txq->tx_tail++; - if (txq->tx_tail == MWL8K_TX_DESCS) - txq->tx_tail = 0; + txq->tail++; + if (txq->tail == MWL8K_TX_DESCS) + txq->tail = 0; - if (txq->tx_head == txq->tx_tail) + if (txq->head == txq->tail) ieee80211_stop_queue(hw, index); mwl8k_tx_start(priv); @@ -1431,7 +1574,7 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) unsigned long timeout = 0; u8 buf[32]; - cmd->result = 0xFFFF; + cmd->result = 0xffff; dma_size = le16_to_cpu(cmd->length); dma_addr = pci_map_single(priv->pdev, cmd, dma_size, PCI_DMA_BIDIRECTIONAL); @@ -1464,7 +1607,7 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) if (!timeout) { printk(KERN_ERR "%s: Command %s timeout after %u ms\n", - priv->name, + wiphy_name(hw->wiphy), mwl8k_cmd_name(cmd->code, buf, sizeof(buf)), MWL8K_CMD_TIMEOUT_MS); rc = -ETIMEDOUT; @@ -1472,7 +1615,7 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) rc = cmd->result ? -EINVAL : 0; if (rc) printk(KERN_ERR "%s: Command %s error 0x%x\n", - priv->name, + wiphy_name(hw->wiphy), mwl8k_cmd_name(cmd->code, buf, sizeof(buf)), le16_to_cpu(cmd->result)); } @@ -1481,9 +1624,9 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) } /* - * GET_HW_SPEC. + * CMD_GET_HW_SPEC (STA version). */ -struct mwl8k_cmd_get_hw_spec { +struct mwl8k_cmd_get_hw_spec_sta { struct mwl8k_cmd_pkt header; __u8 hw_rev; __u8 host_interface; @@ -1499,13 +1642,13 @@ struct mwl8k_cmd_get_hw_spec { __le32 tx_queue_ptrs[MWL8K_TX_QUEUES]; __le32 caps2; __le32 num_tx_desc_per_queue; - __le32 total_rx_desc; + __le32 total_rxd; } __attribute__((packed)); -static int mwl8k_cmd_get_hw_spec(struct ieee80211_hw *hw) +static int mwl8k_cmd_get_hw_spec_sta(struct ieee80211_hw *hw) { struct mwl8k_priv *priv = hw->priv; - struct mwl8k_cmd_get_hw_spec *cmd; + struct mwl8k_cmd_get_hw_spec_sta *cmd; int rc; int i; @@ -1518,12 +1661,12 @@ static int mwl8k_cmd_get_hw_spec(struct ieee80211_hw *hw) memset(cmd->perm_addr, 0xff, sizeof(cmd->perm_addr)); cmd->ps_cookie = cpu_to_le32(priv->cookie_dma); - cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rx_desc_dma); + cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rxd_dma); cmd->num_tx_queues = cpu_to_le32(MWL8K_TX_QUEUES); for (i = 0; i < MWL8K_TX_QUEUES; i++) - cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].tx_desc_dma); + cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].txd_dma); cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS); - cmd->total_rx_desc = cpu_to_le32(MWL8K_RX_DESCS); + cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS); rc = mwl8k_post_cmd(hw, &cmd->header); @@ -1539,6 +1682,129 @@ static int mwl8k_cmd_get_hw_spec(struct ieee80211_hw *hw) } /* + * CMD_GET_HW_SPEC (AP version). + */ +struct mwl8k_cmd_get_hw_spec_ap { + struct mwl8k_cmd_pkt header; + __u8 hw_rev; + __u8 host_interface; + __le16 num_wcb; + __le16 num_mcaddrs; + __u8 perm_addr[ETH_ALEN]; + __le16 region_code; + __le16 num_antenna; + __le32 fw_rev; + __le32 wcbbase0; + __le32 rxwrptr; + __le32 rxrdptr; + __le32 ps_cookie; + __le32 wcbbase1; + __le32 wcbbase2; + __le32 wcbbase3; +} __attribute__((packed)); + +static int mwl8k_cmd_get_hw_spec_ap(struct ieee80211_hw *hw) +{ + struct mwl8k_priv *priv = hw->priv; + struct mwl8k_cmd_get_hw_spec_ap *cmd; + int rc; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + return -ENOMEM; + + cmd->header.code = cpu_to_le16(MWL8K_CMD_GET_HW_SPEC); + cmd->header.length = cpu_to_le16(sizeof(*cmd)); + + memset(cmd->perm_addr, 0xff, sizeof(cmd->perm_addr)); + cmd->ps_cookie = cpu_to_le32(priv->cookie_dma); + + rc = mwl8k_post_cmd(hw, &cmd->header); + + if (!rc) { + int off; + + SET_IEEE80211_PERM_ADDR(hw, cmd->perm_addr); + priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs); + priv->fw_rev = le32_to_cpu(cmd->fw_rev); + priv->hw_rev = cmd->hw_rev; + + off = le32_to_cpu(cmd->wcbbase0) & 0xffff; + iowrite32(cpu_to_le32(priv->txq[0].txd_dma), priv->sram + off); + + off = le32_to_cpu(cmd->rxwrptr) & 0xffff; + iowrite32(cpu_to_le32(priv->rxq[0].rxd_dma), priv->sram + off); + + off = le32_to_cpu(cmd->rxrdptr) & 0xffff; + iowrite32(cpu_to_le32(priv->rxq[0].rxd_dma), priv->sram + off); + + off = le32_to_cpu(cmd->wcbbase1) & 0xffff; + iowrite32(cpu_to_le32(priv->txq[1].txd_dma), priv->sram + off); + + off = le32_to_cpu(cmd->wcbbase2) & 0xffff; + iowrite32(cpu_to_le32(priv->txq[2].txd_dma), priv->sram + off); + + off = le32_to_cpu(cmd->wcbbase3) & 0xffff; + iowrite32(cpu_to_le32(priv->txq[3].txd_dma), priv->sram + off); + } + + kfree(cmd); + return rc; +} + +/* + * CMD_SET_HW_SPEC. + */ +struct mwl8k_cmd_set_hw_spec { + struct mwl8k_cmd_pkt header; + __u8 hw_rev; + __u8 host_interface; + __le16 num_mcaddrs; + __u8 perm_addr[ETH_ALEN]; + __le16 region_code; + __le32 fw_rev; + __le32 ps_cookie; + __le32 caps; + __le32 rx_queue_ptr; + __le32 num_tx_queues; + __le32 tx_queue_ptrs[MWL8K_TX_QUEUES]; + __le32 flags; + __le32 num_tx_desc_per_queue; + __le32 total_rxd; +} __attribute__((packed)); + +#define MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT 0x00000080 + +static int mwl8k_cmd_set_hw_spec(struct ieee80211_hw *hw) +{ + struct mwl8k_priv *priv = hw->priv; + struct mwl8k_cmd_set_hw_spec *cmd; + int rc; + int i; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + return -ENOMEM; + + cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_HW_SPEC); + cmd->header.length = cpu_to_le16(sizeof(*cmd)); + + cmd->ps_cookie = cpu_to_le32(priv->cookie_dma); + cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rxd_dma); + cmd->num_tx_queues = cpu_to_le32(MWL8K_TX_QUEUES); + for (i = 0; i < MWL8K_TX_QUEUES; i++) + cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].txd_dma); + cmd->flags = cpu_to_le32(MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT); + cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS); + cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS); + + rc = mwl8k_post_cmd(hw, &cmd->header); + kfree(cmd); + + return rc; +} + +/* * CMD_MAC_MULTICAST_ADR. */ struct mwl8k_cmd_mac_multicast_adr { @@ -1548,19 +1814,23 @@ struct mwl8k_cmd_mac_multicast_adr { __u8 addr[0][ETH_ALEN]; }; -#define MWL8K_ENABLE_RX_MULTICAST 0x000F +#define MWL8K_ENABLE_RX_DIRECTED 0x0001 +#define MWL8K_ENABLE_RX_MULTICAST 0x0002 +#define MWL8K_ENABLE_RX_ALL_MULTICAST 0x0004 +#define MWL8K_ENABLE_RX_BROADCAST 0x0008 static struct mwl8k_cmd_pkt * -__mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw, +__mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw, int allmulti, int mc_count, struct dev_addr_list *mclist) { struct mwl8k_priv *priv = hw->priv; struct mwl8k_cmd_mac_multicast_adr *cmd; int size; - int i; - if (mc_count > priv->num_mcaddrs) - mc_count = priv->num_mcaddrs; + if (allmulti || mc_count > priv->num_mcaddrs) { + allmulti = 1; + mc_count = 0; + } size = sizeof(*cmd) + mc_count * ETH_ALEN; @@ -1570,16 +1840,24 @@ __mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw, cmd->header.code = cpu_to_le16(MWL8K_CMD_MAC_MULTICAST_ADR); cmd->header.length = cpu_to_le16(size); - cmd->action = cpu_to_le16(MWL8K_ENABLE_RX_MULTICAST); - cmd->numaddr = cpu_to_le16(mc_count); - - for (i = 0; i < mc_count && mclist; i++) { - if (mclist->da_addrlen != ETH_ALEN) { - kfree(cmd); - return NULL; + cmd->action = cpu_to_le16(MWL8K_ENABLE_RX_DIRECTED | + MWL8K_ENABLE_RX_BROADCAST); + + if (allmulti) { + cmd->action |= cpu_to_le16(MWL8K_ENABLE_RX_ALL_MULTICAST); + } else if (mc_count) { + int i; + + cmd->action |= cpu_to_le16(MWL8K_ENABLE_RX_MULTICAST); + cmd->numaddr = cpu_to_le16(mc_count); + for (i = 0; i < mc_count && mclist; i++) { + if (mclist->da_addrlen != ETH_ALEN) { + kfree(cmd); + return NULL; + } + memcpy(cmd->addr[i], mclist->da_addr, ETH_ALEN); + mclist = mclist->next; } - memcpy(cmd->addr[i], mclist->da_addr, ETH_ALEN); - mclist = mclist->next; } return &cmd->header; @@ -1590,7 +1868,6 @@ __mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw, */ struct mwl8k_cmd_802_11_get_stat { struct mwl8k_cmd_pkt header; - __le16 action; __le32 stats[64]; } __attribute__((packed)); @@ -1611,7 +1888,6 @@ static int mwl8k_cmd_802_11_get_stat(struct ieee80211_hw *hw, cmd->header.code = cpu_to_le16(MWL8K_CMD_GET_STAT); cmd->header.length = cpu_to_le16(sizeof(*cmd)); - cmd->action = cpu_to_le16(MWL8K_CMD_GET); rc = mwl8k_post_cmd(hw, &cmd->header); if (!rc) { @@ -1727,6 +2003,39 @@ static int mwl8k_cmd_802_11_rf_tx_power(struct ieee80211_hw *hw, int dBm) } /* + * CMD_RF_ANTENNA. + */ +struct mwl8k_cmd_rf_antenna { + struct mwl8k_cmd_pkt header; + __le16 antenna; + __le16 mode; +} __attribute__((packed)); + +#define MWL8K_RF_ANTENNA_RX 1 +#define MWL8K_RF_ANTENNA_TX 2 + +static int +mwl8k_cmd_rf_antenna(struct ieee80211_hw *hw, int antenna, int mask) +{ + struct mwl8k_cmd_rf_antenna *cmd; + int rc; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + return -ENOMEM; + + cmd->header.code = cpu_to_le16(MWL8K_CMD_RF_ANTENNA); + cmd->header.length = cpu_to_le16(sizeof(*cmd)); + cmd->antenna = cpu_to_le16(antenna); + cmd->mode = cpu_to_le16(mask); + + rc = mwl8k_post_cmd(hw, &cmd->header); + kfree(cmd); + + return rc; +} + +/* * CMD_SET_PRE_SCAN. */ struct mwl8k_cmd_set_pre_scan { @@ -1904,6 +2213,46 @@ static int mwl8k_enable_sniffer(struct ieee80211_hw *hw, bool enable) } /* + * CMD_SET_MAC_ADDR. + */ +struct mwl8k_cmd_set_mac_addr { + struct mwl8k_cmd_pkt header; + union { + struct { + __le16 mac_type; + __u8 mac_addr[ETH_ALEN]; + } mbss; + __u8 mac_addr[ETH_ALEN]; + }; +} __attribute__((packed)); + +static int mwl8k_set_mac_addr(struct ieee80211_hw *hw, u8 *mac) +{ + struct mwl8k_priv *priv = hw->priv; + struct mwl8k_cmd_set_mac_addr *cmd; + int rc; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + return -ENOMEM; + + cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_MAC_ADDR); + cmd->header.length = cpu_to_le16(sizeof(*cmd)); + if (priv->ap_fw) { + cmd->mbss.mac_type = 0; + memcpy(cmd->mbss.mac_addr, mac, ETH_ALEN); + } else { + memcpy(cmd->mac_addr, mac, ETH_ALEN); + } + + rc = mwl8k_post_cmd(hw, &cmd->header); + kfree(cmd); + + return rc; +} + + +/* * CMD_SET_RATEADAPT_MODE. */ struct mwl8k_cmd_set_rate_adapt_mode { @@ -2005,17 +2354,34 @@ struct mwl8k_cmd_set_edca_params { /* TX opportunity in units of 32 us */ __le16 txop; - /* Log exponent of max contention period: 0...15*/ - __u8 log_cw_max; + union { + struct { + /* Log exponent of max contention period: 0...15 */ + __le32 log_cw_max; + + /* Log exponent of min contention period: 0...15 */ + __le32 log_cw_min; + + /* Adaptive interframe spacing in units of 32us */ + __u8 aifs; + + /* TX queue to configure */ + __u8 txq; + } ap; + struct { + /* Log exponent of max contention period: 0...15 */ + __u8 log_cw_max; - /* Log exponent of min contention period: 0...15 */ - __u8 log_cw_min; + /* Log exponent of min contention period: 0...15 */ + __u8 log_cw_min; - /* Adaptive interframe spacing in units of 32us */ - __u8 aifs; + /* Adaptive interframe spacing in units of 32us */ + __u8 aifs; - /* TX queue to configure */ - __u8 txq; + /* TX queue to configure */ + __u8 txq; + } sta; + }; } __attribute__((packed)); #define MWL8K_SET_EDCA_CW 0x01 @@ -2031,6 +2397,7 @@ mwl8k_set_edca_params(struct ieee80211_hw *hw, __u8 qnum, __u16 cw_min, __u16 cw_max, __u8 aifs, __u16 txop) { + struct mwl8k_priv *priv = hw->priv; struct mwl8k_cmd_set_edca_params *cmd; int rc; @@ -2038,14 +2405,27 @@ mwl8k_set_edca_params(struct ieee80211_hw *hw, __u8 qnum, if (cmd == NULL) return -ENOMEM; + /* + * Queues 0 (BE) and 1 (BK) are swapped in hardware for + * this call. + */ + qnum ^= !(qnum >> 1); + cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_EDCA_PARAMS); cmd->header.length = cpu_to_le16(sizeof(*cmd)); cmd->action = cpu_to_le16(MWL8K_SET_EDCA_ALL); cmd->txop = cpu_to_le16(txop); - cmd->log_cw_max = (u8)ilog2(cw_max + 1); - cmd->log_cw_min = (u8)ilog2(cw_min + 1); - cmd->aifs = aifs; - cmd->txq = qnum; + if (priv->ap_fw) { + cmd->ap.log_cw_max = cpu_to_le32(ilog2(cw_max + 1)); + cmd->ap.log_cw_min = cpu_to_le32(ilog2(cw_min + 1)); + cmd->ap.aifs = aifs; + cmd->ap.txq = qnum; + } else { + cmd->sta.log_cw_max = (u8)ilog2(cw_max + 1); + cmd->sta.log_cw_min = (u8)ilog2(cw_min + 1); + cmd->sta.aifs = aifs; + cmd->sta.txq = qnum; + } rc = mwl8k_post_cmd(hw, &cmd->header); kfree(cmd); @@ -2093,8 +2473,8 @@ static int mwl8k_finalize_join(struct ieee80211_hw *hw, void *frame, /* XXX TBD Might just have to abort and return an error */ if (payload_len > MWL8K_FJ_BEACON_MAXLEN) printk(KERN_ERR "%s(): WARNING: Incomplete beacon " - "sent to firmware. Sz=%u MAX=%u\n", __func__, - payload_len, MWL8K_FJ_BEACON_MAXLEN); + "sent to firmware. Sz=%u MAX=%u\n", __func__, + payload_len, MWL8K_FJ_BEACON_MAXLEN); if (payload_len > MWL8K_FJ_BEACON_MAXLEN) payload_len = MWL8K_FJ_BEACON_MAXLEN; @@ -2341,9 +2721,10 @@ static int mwl8k_cmd_use_fixed_rate(struct ieee80211_hw *hw, cmd->rate_type = cpu_to_le32(rate_type); if (rate_table != NULL) { - /* Copy over each field manually so - * that bitflipping can be done - */ + /* + * Copy over each field manually so that endian + * conversion can be done. + */ cmd->rate_table.allow_rate_drop = cpu_to_le32(rate_table->allow_rate_drop); cmd->rate_table.num_rates = @@ -2399,7 +2780,7 @@ static irqreturn_t mwl8k_interrupt(int irq, void *dev_id) if (status & MWL8K_A2H_INT_QUEUE_EMPTY) { if (!mutex_is_locked(&priv->fw_mutex) && - priv->radio_on && mwl8k_txq_busy(priv)) + priv->radio_on && priv->pending_tx_pkts) mwl8k_tx_start(priv); } @@ -2418,7 +2799,7 @@ static int mwl8k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) if (priv->current_channel == NULL) { printk(KERN_DEBUG "%s: dropped TX frame since radio " - "disabled\n", priv->name); + "disabled\n", wiphy_name(hw->wiphy)); dev_kfree_skb(skb); return NETDEV_TX_OK; } @@ -2437,7 +2818,7 @@ static int mwl8k_start(struct ieee80211_hw *hw) IRQF_SHARED, MWL8K_NAME, hw); if (rc) { printk(KERN_ERR "%s: failed to register IRQ handler\n", - priv->name); + wiphy_name(hw->wiphy)); return -EIO; } @@ -2451,12 +2832,17 @@ static int mwl8k_start(struct ieee80211_hw *hw) if (!rc) { rc = mwl8k_cmd_802_11_radio_enable(hw); - if (!rc) - rc = mwl8k_cmd_set_pre_scan(hw); + if (!priv->ap_fw) { + if (!rc) + rc = mwl8k_enable_sniffer(hw, 0); - if (!rc) - rc = mwl8k_cmd_set_post_scan(hw, - "\x00\x00\x00\x00\x00\x00"); + if (!rc) + rc = mwl8k_cmd_set_pre_scan(hw); + + if (!rc) + rc = mwl8k_cmd_set_post_scan(hw, + "\x00\x00\x00\x00\x00\x00"); + } if (!rc) rc = mwl8k_cmd_setrateadaptmode(hw, 0); @@ -2464,9 +2850,6 @@ static int mwl8k_start(struct ieee80211_hw *hw) if (!rc) rc = mwl8k_set_wmm(hw, 0); - if (!rc) - rc = mwl8k_enable_sniffer(hw, 0); - mwl8k_fw_unlock(hw); } @@ -2500,9 +2883,6 @@ static void mwl8k_stop(struct ieee80211_hw *hw) /* Stop tx reclaim tasklet */ tasklet_disable(&priv->tx_reclaim_task); - /* Stop config thread */ - flush_workqueue(priv->config_wq); - /* Return all skbs to mac80211 */ for (i = 0; i < MWL8K_TX_QUEUES; i++) mwl8k_txq_reclaim(hw, i, 1); @@ -2526,11 +2906,24 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw, if (conf->type != NL80211_IFTYPE_STATION) return -EINVAL; + /* + * Reject interface creation if sniffer mode is active, as + * STA operation is mutually exclusive with hardware sniffer + * mode. + */ + if (priv->sniffer_enabled) { + printk(KERN_INFO "%s: unable to create STA " + "interface due to sniffer mode being enabled\n", + wiphy_name(hw->wiphy)); + return -EINVAL; + } + /* Clean out driver private area */ mwl8k_vif = MWL8K_VIF(conf->vif); memset(mwl8k_vif, 0, sizeof(*mwl8k_vif)); - /* Save the mac address */ + /* Set and save the mac address */ + mwl8k_set_mac_addr(hw, conf->mac_addr); memcpy(mwl8k_vif->mac_addr, conf->mac_addr, ETH_ALEN); /* Back pointer to parent config block */ @@ -2558,6 +2951,8 @@ static void mwl8k_remove_interface(struct ieee80211_hw *hw, if (priv->vif == NULL) return; + mwl8k_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00"); + priv->vif = NULL; } @@ -2593,8 +2988,13 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed) if (rc) goto out; - if (mwl8k_cmd_mimo_config(hw, 0x7, 0x7)) - rc = -EINVAL; + if (priv->ap_fw) { + rc = mwl8k_cmd_rf_antenna(hw, MWL8K_RF_ANTENNA_RX, 0x7); + if (!rc) + rc = mwl8k_cmd_rf_antenna(hw, MWL8K_RF_ANTENNA_TX, 0x7); + } else { + rc = mwl8k_cmd_mimo_config(hw, 0x7, 0x7); + } out: mwl8k_fw_unlock(hw); @@ -2681,32 +3081,108 @@ static u64 mwl8k_prepare_multicast(struct ieee80211_hw *hw, { struct mwl8k_cmd_pkt *cmd; - cmd = __mwl8k_cmd_mac_multicast_adr(hw, mc_count, mclist); + /* + * Synthesize and return a command packet that programs the + * hardware multicast address filter. At this point we don't + * know whether FIF_ALLMULTI is being requested, but if it is, + * we'll end up throwing this packet away and creating a new + * one in mwl8k_configure_filter(). + */ + cmd = __mwl8k_cmd_mac_multicast_adr(hw, 0, mc_count, mclist); return (unsigned long)cmd; } +static int +mwl8k_configure_filter_sniffer(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags) +{ + struct mwl8k_priv *priv = hw->priv; + + /* + * Hardware sniffer mode is mutually exclusive with STA + * operation, so refuse to enable sniffer mode if a STA + * interface is active. + */ + if (priv->vif != NULL) { + if (net_ratelimit()) + printk(KERN_INFO "%s: not enabling sniffer " + "mode because STA interface is active\n", + wiphy_name(hw->wiphy)); + return 0; + } + + if (!priv->sniffer_enabled) { + if (mwl8k_enable_sniffer(hw, 1)) + return 0; + priv->sniffer_enabled = true; + } + + *total_flags &= FIF_PROMISC_IN_BSS | FIF_ALLMULTI | + FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL | + FIF_OTHER_BSS; + + return 1; +} + static void mwl8k_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *total_flags, u64 multicast) { struct mwl8k_priv *priv = hw->priv; - struct mwl8k_cmd_pkt *multicast_adr_cmd; + struct mwl8k_cmd_pkt *cmd = (void *)(unsigned long)multicast; + + /* + * AP firmware doesn't allow fine-grained control over + * the receive filter. + */ + if (priv->ap_fw) { + *total_flags &= FIF_ALLMULTI | FIF_BCN_PRBRESP_PROMISC; + kfree(cmd); + return; + } + + /* + * Enable hardware sniffer mode if FIF_CONTROL or + * FIF_OTHER_BSS is requested. + */ + if (*total_flags & (FIF_CONTROL | FIF_OTHER_BSS) && + mwl8k_configure_filter_sniffer(hw, changed_flags, total_flags)) { + kfree(cmd); + return; + } /* Clear unsupported feature flags */ - *total_flags &= FIF_BCN_PRBRESP_PROMISC; + *total_flags &= FIF_ALLMULTI | FIF_BCN_PRBRESP_PROMISC; if (mwl8k_fw_lock(hw)) return; + if (priv->sniffer_enabled) { + mwl8k_enable_sniffer(hw, 0); + priv->sniffer_enabled = false; + } + if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { - if (*total_flags & FIF_BCN_PRBRESP_PROMISC) + if (*total_flags & FIF_BCN_PRBRESP_PROMISC) { + /* + * Disable the BSS filter. + */ mwl8k_cmd_set_pre_scan(hw); - else { + } else { u8 *bssid; - bssid = "\x00\x00\x00\x00\x00\x00"; + /* + * Enable the BSS filter. + * + * If there is an active STA interface, use that + * interface's BSSID, otherwise use a dummy one + * (where the OUI part needs to be nonzero for + * the BSSID to be accepted by POST_SCAN). + */ + bssid = "\x01\x00\x00\x00\x00\x00"; if (priv->vif != NULL) bssid = MWL8K_VIF(priv->vif)->bssid; @@ -2714,10 +3190,20 @@ static void mwl8k_configure_filter(struct ieee80211_hw *hw, } } - multicast_adr_cmd = (void *)(unsigned long)multicast; - if (multicast_adr_cmd != NULL) { - mwl8k_post_cmd(hw, multicast_adr_cmd); - kfree(multicast_adr_cmd); + /* + * If FIF_ALLMULTI is being requested, throw away the command + * packet that ->prepare_multicast() built and replace it with + * a command packet that enables reception of all multicast + * packets. + */ + if (*total_flags & FIF_ALLMULTI) { + kfree(cmd); + cmd = __mwl8k_cmd_mac_multicast_adr(hw, 1, 0, NULL); + } + + if (cmd != NULL) { + mwl8k_post_cmd(hw, cmd); + kfree(cmd); } mwl8k_fw_unlock(hw); @@ -2762,7 +3248,7 @@ static int mwl8k_get_tx_stats(struct ieee80211_hw *hw, spin_lock_bh(&priv->tx_lock); for (index = 0; index < MWL8K_TX_QUEUES; index++) { txq = priv->txq + index; - memcpy(&stats[index], &txq->tx_stats, + memcpy(&stats[index], &txq->stats, sizeof(struct ieee80211_tx_queue_stats)); } spin_unlock_bh(&priv->tx_lock); @@ -2802,7 +3288,7 @@ static void mwl8k_tx_reclaim_handler(unsigned long data) for (i = 0; i < MWL8K_TX_QUEUES; i++) mwl8k_txq_reclaim(hw, i, 0); - if (priv->tx_wait != NULL && mwl8k_txq_busy(priv) == 0) { + if (priv->tx_wait != NULL && !priv->pending_tx_pkts) { complete(priv->tx_wait); priv->tx_wait = NULL; } @@ -2822,6 +3308,36 @@ static void mwl8k_finalize_join_worker(struct work_struct *work) priv->beacon_skb = NULL; } +enum { + MWL8687 = 0, + MWL8366, +}; + +static struct mwl8k_device_info mwl8k_info_tbl[] __devinitdata = { + { + .part_name = "88w8687", + .helper_image = "mwl8k/helper_8687.fw", + .fw_image = "mwl8k/fmimage_8687.fw", + .rxd_ops = &rxd_8687_ops, + .modes = BIT(NL80211_IFTYPE_STATION), + }, + { + .part_name = "88w8366", + .helper_image = "mwl8k/helper_8366.fw", + .fw_image = "mwl8k/fmimage_8366.fw", + .rxd_ops = &rxd_8366_ops, + .modes = 0, + }, +}; + +static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = { + { PCI_VDEVICE(MARVELL, 0x2a2b), .driver_data = MWL8687, }, + { PCI_VDEVICE(MARVELL, 0x2a30), .driver_data = MWL8687, }, + { PCI_VDEVICE(MARVELL, 0x2a40), .driver_data = MWL8366, }, + { }, +}; +MODULE_DEVICE_TABLE(pci, mwl8k_pci_id_table); + static int __devinit mwl8k_probe(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -2862,17 +3378,34 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, priv = hw->priv; priv->hw = hw; priv->pdev = pdev; + priv->device_info = &mwl8k_info_tbl[id->driver_data]; + priv->rxd_ops = priv->device_info->rxd_ops; + priv->sniffer_enabled = false; priv->wmm_enabled = false; priv->pending_tx_pkts = 0; - strncpy(priv->name, MWL8K_NAME, sizeof(priv->name)); SET_IEEE80211_DEV(hw, &pdev->dev); pci_set_drvdata(pdev, hw); + priv->sram = pci_iomap(pdev, 0, 0x10000); + if (priv->sram == NULL) { + printk(KERN_ERR "%s: Cannot map device SRAM\n", + wiphy_name(hw->wiphy)); + goto err_iounmap; + } + + /* + * If BAR0 is a 32 bit BAR, the register BAR will be BAR1. + * If BAR0 is a 64 bit BAR, the register BAR will be BAR2. + */ priv->regs = pci_iomap(pdev, 1, 0x10000); if (priv->regs == NULL) { - printk(KERN_ERR "%s: Cannot map device memory\n", priv->name); - goto err_iounmap; + priv->regs = pci_iomap(pdev, 2, 0x10000); + if (priv->regs == NULL) { + printk(KERN_ERR "%s: Cannot map device registers\n", + wiphy_name(hw->wiphy)); + goto err_iounmap; + } } memcpy(priv->channels, mwl8k_channels, sizeof(mwl8k_channels)); @@ -2897,7 +3430,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, hw->queues = MWL8K_TX_QUEUES; - hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + hw->wiphy->interface_modes = priv->device_info->modes; /* Set rssi and noise values to dBm */ hw->flags |= IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; @@ -2916,11 +3449,6 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, mwl8k_tx_reclaim_handler, (unsigned long)hw); tasklet_disable(&priv->tx_reclaim_task); - /* Config workthread */ - priv->config_wq = create_singlethread_workqueue("mwl8k_config"); - if (priv->config_wq == NULL) - goto err_iounmap; - /* Power management cookie */ priv->cookie = pci_alloc_consistent(priv->pdev, 4, &priv->cookie_dma); if (priv->cookie == NULL) @@ -2934,11 +3462,12 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, mutex_init(&priv->fw_mutex); priv->fw_mutex_owner = NULL; priv->fw_mutex_depth = 0; - priv->tx_wait = NULL; priv->hostcmd_wait = NULL; spin_lock_init(&priv->tx_lock); + priv->tx_wait = NULL; + for (i = 0; i < MWL8K_TX_QUEUES; i++) { rc = mwl8k_txq_init(hw, i); if (rc) @@ -2954,7 +3483,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, IRQF_SHARED, MWL8K_NAME, hw); if (rc) { printk(KERN_ERR "%s: failed to register IRQ handler\n", - priv->name); + wiphy_name(hw->wiphy)); goto err_free_queues; } @@ -2962,16 +3491,18 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, mwl8k_hw_reset(priv); /* Ask userland hotplug daemon for the device firmware */ - rc = mwl8k_request_firmware(priv, (u32)id->driver_data); + rc = mwl8k_request_firmware(priv); if (rc) { - printk(KERN_ERR "%s: Firmware files not found\n", priv->name); + printk(KERN_ERR "%s: Firmware files not found\n", + wiphy_name(hw->wiphy)); goto err_free_irq; } /* Load firmware into hardware */ - rc = mwl8k_load_firmware(priv); + rc = mwl8k_load_firmware(hw); if (rc) { - printk(KERN_ERR "%s: Cannot start firmware\n", priv->name); + printk(KERN_ERR "%s: Cannot start firmware\n", + wiphy_name(hw->wiphy)); goto err_stop_firmware; } @@ -2986,16 +3517,31 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, iowrite32(MWL8K_A2H_EVENTS, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK); /* Get config data, mac addrs etc */ - rc = mwl8k_cmd_get_hw_spec(hw); + if (priv->ap_fw) { + rc = mwl8k_cmd_get_hw_spec_ap(hw); + if (!rc) + rc = mwl8k_cmd_set_hw_spec(hw); + } else { + rc = mwl8k_cmd_get_hw_spec_sta(hw); + } if (rc) { - printk(KERN_ERR "%s: Cannot initialise firmware\n", priv->name); + printk(KERN_ERR "%s: Cannot initialise firmware\n", + wiphy_name(hw->wiphy)); goto err_stop_firmware; } /* Turn radio off */ rc = mwl8k_cmd_802_11_radio_disable(hw); if (rc) { - printk(KERN_ERR "%s: Cannot disable\n", priv->name); + printk(KERN_ERR "%s: Cannot disable\n", wiphy_name(hw->wiphy)); + goto err_stop_firmware; + } + + /* Clear MAC address */ + rc = mwl8k_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00"); + if (rc) { + printk(KERN_ERR "%s: Cannot clear MAC address\n", + wiphy_name(hw->wiphy)); goto err_stop_firmware; } @@ -3005,13 +3551,15 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, rc = ieee80211_register_hw(hw); if (rc) { - printk(KERN_ERR "%s: Cannot register device\n", priv->name); + printk(KERN_ERR "%s: Cannot register device\n", + wiphy_name(hw->wiphy)); goto err_stop_firmware; } - printk(KERN_INFO "%s: 88w%u v%d, %pM, firmware version %u.%u.%u.%u\n", - wiphy_name(hw->wiphy), priv->part_num, priv->hw_rev, - hw->wiphy->perm_addr, + printk(KERN_INFO "%s: %s v%d, %pM, %s firmware %u.%u.%u.%u\n", + wiphy_name(hw->wiphy), priv->device_info->part_name, + priv->hw_rev, hw->wiphy->perm_addr, + priv->ap_fw ? "AP" : "STA", (priv->fw_rev >> 24) & 0xff, (priv->fw_rev >> 16) & 0xff, (priv->fw_rev >> 8) & 0xff, priv->fw_rev & 0xff); @@ -3038,8 +3586,8 @@ err_iounmap: if (priv->regs != NULL) pci_iounmap(pdev, priv->regs); - if (priv->config_wq != NULL) - destroy_workqueue(priv->config_wq); + if (priv->sram != NULL) + pci_iounmap(pdev, priv->sram); pci_set_drvdata(pdev, NULL); ieee80211_free_hw(hw); @@ -3073,9 +3621,6 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev) /* Remove tx reclaim tasklet */ tasklet_kill(&priv->tx_reclaim_task); - /* Stop config thread */ - destroy_workqueue(priv->config_wq); - /* Stop hardware */ mwl8k_hw_reset(priv); @@ -3088,10 +3633,10 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev) mwl8k_rxq_deinit(hw, 0); - pci_free_consistent(priv->pdev, 4, - priv->cookie, priv->cookie_dma); + pci_free_consistent(priv->pdev, 4, priv->cookie, priv->cookie_dma); pci_iounmap(pdev, priv->regs); + pci_iounmap(pdev, priv->sram); pci_set_drvdata(pdev, NULL); ieee80211_free_hw(hw); pci_release_regions(pdev); @@ -3100,7 +3645,7 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev) static struct pci_driver mwl8k_driver = { .name = MWL8K_NAME, - .id_table = mwl8k_table, + .id_table = mwl8k_pci_id_table, .probe = mwl8k_probe, .remove = __devexit_p(mwl8k_remove), .shutdown = __devexit_p(mwl8k_shutdown), @@ -3118,3 +3663,8 @@ static void __exit mwl8k_exit(void) module_init(mwl8k_init); module_exit(mwl8k_exit); + +MODULE_DESCRIPTION(MWL8K_DESC); +MODULE_VERSION(MWL8K_VERSION); +MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig index dce652054afd..e2a2c18920aa 100644 --- a/drivers/net/wireless/orinoco/Kconfig +++ b/drivers/net/wireless/orinoco/Kconfig @@ -1,6 +1,6 @@ config HERMES tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" - depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211 + depends on (PPC_PMAC || PCI || PCMCIA) depends on CFG80211 && CFG80211_WEXT select WIRELESS_EXT select WEXT_SPY diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig index b45d6a4ed1e8..b0342a520bf1 100644 --- a/drivers/net/wireless/p54/Kconfig +++ b/drivers/net/wireless/p54/Kconfig @@ -1,6 +1,6 @@ config P54_COMMON tristate "Softmac Prism54 support" - depends on MAC80211 && WLAN_80211 && EXPERIMENTAL + depends on MAC80211 && EXPERIMENTAL select FW_LOADER ---help--- This is common code for isl38xx/stlc45xx based modules. diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c index 0efe67deedee..8e3818f6832e 100644 --- a/drivers/net/wireless/p54/eeprom.c +++ b/drivers/net/wireless/p54/eeprom.c @@ -126,7 +126,7 @@ static int p54_generate_band(struct ieee80211_hw *dev, int ret = -ENOMEM; if ((!list->entries) || (!list->band_channel_num[band])) - return 0; + return -EINVAL; tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); if (!tmp) @@ -158,6 +158,7 @@ static int p54_generate_band(struct ieee80211_hw *dev, (list->channels[i].data & CHAN_HAS_CURVE ? "" : " [curve data]"), list->channels[i].index, list->channels[i].freq); + continue; } tmp->channels[j].band = list->channels[i].band; @@ -165,7 +166,16 @@ static int p54_generate_band(struct ieee80211_hw *dev, j++; } - tmp->n_channels = list->band_channel_num[band]; + if (j == 0) { + printk(KERN_ERR "%s: Disabling totally damaged %s band.\n", + wiphy_name(dev->wiphy), (band == IEEE80211_BAND_2GHZ) ? + "2 GHz" : "5 GHz"); + + ret = -ENODATA; + goto err_out; + } + + tmp->n_channels = j; old = priv->band_table[band]; priv->band_table[band] = tmp; if (old) { @@ -228,13 +238,13 @@ static int p54_generate_channel_lists(struct ieee80211_hw *dev) struct p54_common *priv = dev->priv; struct p54_channel_list *list; unsigned int i, j, max_channel_num; - int ret = -ENOMEM; + int ret = 0; u16 freq; if ((priv->iq_autocal_len != priv->curve_data->entries) || (priv->iq_autocal_len != priv->output_limit->entries)) - printk(KERN_ERR "%s: EEPROM is damaged... you may not be able" - "to use all channels with this device.\n", + printk(KERN_ERR "%s: Unsupported or damaged EEPROM detected. " + "You may not be able to use all channels.\n", wiphy_name(dev->wiphy)); max_channel_num = max_t(unsigned int, priv->output_limit->entries, @@ -243,8 +253,10 @@ static int p54_generate_channel_lists(struct ieee80211_hw *dev) priv->curve_data->entries); list = kzalloc(sizeof(*list), GFP_KERNEL); - if (!list) + if (!list) { + ret = -ENOMEM; goto free; + } list->max_entries = max_channel_num; list->channels = kzalloc(sizeof(struct p54_channel_entry) * @@ -282,13 +294,8 @@ static int p54_generate_channel_lists(struct ieee80211_hw *dev) p54_compare_channels, NULL); for (i = 0, j = 0; i < IEEE80211_NUM_BANDS; i++) { - if (list->band_channel_num[i]) { - ret = p54_generate_band(dev, list, i); - if (ret) - goto free; - + if (p54_generate_band(dev, list, i) == 0) j++; - } } if (j == 0) { /* no useable band available. */ diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 390c0c7b3ac2..bf60689aaabb 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -1,6 +1,6 @@ menuconfig RT2X00 tristate "Ralink driver support" - depends on MAC80211 && WLAN_80211 + depends on MAC80211 ---help--- This will enable the support for the Ralink drivers, developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. @@ -64,8 +64,9 @@ config RT2800PCI_SOC default y config RT2800PCI - tristate "Ralink rt2800 (PCI/PCMCIA) support" + tristate "Ralink rt2800 (PCI/PCMCIA) support (VERY EXPERIMENTAL)" depends on (RT2800PCI_PCI || RT2800PCI_SOC) && EXPERIMENTAL + select RT2800_LIB select RT2X00_LIB_PCI if RT2800PCI_PCI select RT2X00_LIB_SOC if RT2800PCI_SOC select RT2X00_LIB_HT @@ -77,6 +78,9 @@ config RT2800PCI This adds support for rt2800 wireless chipset family. Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890 & RT3052 + This driver is non-functional at the moment and is intended for + developers. + When compiled as a module, this driver will be called "rt2800pci.ko". config RT2500USB @@ -104,8 +108,9 @@ config RT73USB When compiled as a module, this driver will be called rt73usb. config RT2800USB - tristate "Ralink rt2800 (USB) support" + tristate "Ralink rt2800 (USB) support (EXPERIMENTAL)" depends on USB && EXPERIMENTAL + select RT2800_LIB select RT2X00_LIB_USB select RT2X00_LIB_HT select RT2X00_LIB_FIRMWARE @@ -115,8 +120,15 @@ config RT2800USB This adds experimental support for rt2800 wireless chipset family. Supported chips: RT2770, RT2870 & RT3070. + Known issues: + - support for RT2870 chips doesn't work with 802.11n APs yet + - support for RT3070 chips is non-functional at the moment + When compiled as a module, this driver will be called "rt2800usb.ko". +config RT2800_LIB + tristate + config RT2X00_LIB_PCI tristate select RT2X00_LIB diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile index 912f5f67e159..971339858297 100644 --- a/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o +obj-$(CONFIG_RT2800_LIB) += rt2800lib.o obj-$(CONFIG_RT2400PCI) += rt2400pci.o obj-$(CONFIG_RT2500PCI) += rt2500pci.o obj-$(CONFIG_RT61PCI) += rt61pci.o diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h new file mode 100644 index 000000000000..d9b6a72e6d27 --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -0,0 +1,1816 @@ +/* + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2800 + Abstract: Data structures and registers for the rt2800 modules. + Supported chipsets: RT2800E, RT2800ED & RT2800U. + */ + +#ifndef RT2800_H +#define RT2800_H + +/* + * RF chip defines. + * + * RF2820 2.4G 2T3R + * RF2850 2.4G/5G 2T3R + * RF2720 2.4G 1T2R + * RF2750 2.4G/5G 1T2R + * RF3020 2.4G 1T1R + * RF2020 2.4G B/G + * RF3021 2.4G 1T2R + * RF3022 2.4G 2T2R + * RF3052 2.4G 2T2R + */ +#define RF2820 0x0001 +#define RF2850 0x0002 +#define RF2720 0x0003 +#define RF2750 0x0004 +#define RF3020 0x0005 +#define RF2020 0x0006 +#define RF3021 0x0007 +#define RF3022 0x0008 +#define RF3052 0x0009 + +/* + * Chipset version. + */ +#define RT2860C_VERSION 0x28600100 +#define RT2860D_VERSION 0x28600101 +#define RT2880E_VERSION 0x28720200 +#define RT2883_VERSION 0x28830300 +#define RT3070_VERSION 0x30700200 + +/* + * Signal information. + * Default offset is required for RSSI <-> dBm conversion. + */ +#define DEFAULT_RSSI_OFFSET 120 /* FIXME */ + +/* + * Register layout information. + */ +#define CSR_REG_BASE 0x1000 +#define CSR_REG_SIZE 0x0800 +#define EEPROM_BASE 0x0000 +#define EEPROM_SIZE 0x0110 +#define BBP_BASE 0x0000 +#define BBP_SIZE 0x0080 +#define RF_BASE 0x0004 +#define RF_SIZE 0x0010 + +/* + * Number of TX queues. + */ +#define NUM_TX_QUEUES 4 + +/* + * USB registers. + */ + +/* + * INT_SOURCE_CSR: Interrupt source register. + * Write one to clear corresponding bit. + * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c + */ +#define INT_SOURCE_CSR 0x0200 +#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001) +#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002) +#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004) +#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008) +#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010) +#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020) +#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040) +#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080) +#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100) +#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200) +#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400) +#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800) +#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000) +#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000) +#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000) +#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000) +#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000) +#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000) + +/* + * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. + */ +#define INT_MASK_CSR 0x0204 +#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001) +#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002) +#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004) +#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008) +#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010) +#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020) +#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040) +#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080) +#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100) +#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200) +#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400) +#define INT_MASK_CSR_TBTT FIELD32(0x00000800) +#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000) +#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000) +#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000) +#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000) +#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000) +#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000) + +/* + * WPDMA_GLO_CFG + */ +#define WPDMA_GLO_CFG 0x0208 +#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001) +#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002) +#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004) +#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008) +#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030) +#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040) +#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080) +#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00) +#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000) + +/* + * WPDMA_RST_IDX + */ +#define WPDMA_RST_IDX 0x020c +#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001) +#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002) +#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004) +#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008) +#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010) +#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020) +#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000) + +/* + * DELAY_INT_CFG + */ +#define DELAY_INT_CFG 0x0210 +#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff) +#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00) +#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000) +#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000) +#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000) +#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000) + +/* + * WMM_AIFSN_CFG: Aifsn for each EDCA AC + * AIFSN0: AC_BE + * AIFSN1: AC_BK + * AIFSN2: AC_VI + * AIFSN3: AC_VO + */ +#define WMM_AIFSN_CFG 0x0214 +#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f) +#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0) +#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00) +#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000) + +/* + * WMM_CWMIN_CSR: CWmin for each EDCA AC + * CWMIN0: AC_BE + * CWMIN1: AC_BK + * CWMIN2: AC_VI + * CWMIN3: AC_VO + */ +#define WMM_CWMIN_CFG 0x0218 +#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f) +#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0) +#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00) +#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000) + +/* + * WMM_CWMAX_CSR: CWmax for each EDCA AC + * CWMAX0: AC_BE + * CWMAX1: AC_BK + * CWMAX2: AC_VI + * CWMAX3: AC_VO + */ +#define WMM_CWMAX_CFG 0x021c +#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f) +#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0) +#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00) +#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000) + +/* + * AC_TXOP0: AC_BK/AC_BE TXOP register + * AC0TXOP: AC_BK in unit of 32us + * AC1TXOP: AC_BE in unit of 32us + */ +#define WMM_TXOP0_CFG 0x0220 +#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff) +#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000) + +/* + * AC_TXOP1: AC_VO/AC_VI TXOP register + * AC2TXOP: AC_VI in unit of 32us + * AC3TXOP: AC_VO in unit of 32us + */ +#define WMM_TXOP1_CFG 0x0224 +#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff) +#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000) + +/* + * GPIO_CTRL_CFG: + */ +#define GPIO_CTRL_CFG 0x0228 +#define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001) +#define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002) +#define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004) +#define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008) +#define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010) +#define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020) +#define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040) +#define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080) +#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00000100) + +/* + * MCU_CMD_CFG + */ +#define MCU_CMD_CFG 0x022c + +/* + * AC_BK register offsets + */ +#define TX_BASE_PTR0 0x0230 +#define TX_MAX_CNT0 0x0234 +#define TX_CTX_IDX0 0x0238 +#define TX_DTX_IDX0 0x023c + +/* + * AC_BE register offsets + */ +#define TX_BASE_PTR1 0x0240 +#define TX_MAX_CNT1 0x0244 +#define TX_CTX_IDX1 0x0248 +#define TX_DTX_IDX1 0x024c + +/* + * AC_VI register offsets + */ +#define TX_BASE_PTR2 0x0250 +#define TX_MAX_CNT2 0x0254 +#define TX_CTX_IDX2 0x0258 +#define TX_DTX_IDX2 0x025c + +/* + * AC_VO register offsets + */ +#define TX_BASE_PTR3 0x0260 +#define TX_MAX_CNT3 0x0264 +#define TX_CTX_IDX3 0x0268 +#define TX_DTX_IDX3 0x026c + +/* + * HCCA register offsets + */ +#define TX_BASE_PTR4 0x0270 +#define TX_MAX_CNT4 0x0274 +#define TX_CTX_IDX4 0x0278 +#define TX_DTX_IDX4 0x027c + +/* + * MGMT register offsets + */ +#define TX_BASE_PTR5 0x0280 +#define TX_MAX_CNT5 0x0284 +#define TX_CTX_IDX5 0x0288 +#define TX_DTX_IDX5 0x028c + +/* + * RX register offsets + */ +#define RX_BASE_PTR 0x0290 +#define RX_MAX_CNT 0x0294 +#define RX_CRX_IDX 0x0298 +#define RX_DRX_IDX 0x029c + +/* + * PBF_SYS_CTRL + * HOST_RAM_WRITE: enable Host program ram write selection + */ +#define PBF_SYS_CTRL 0x0400 +#define PBF_SYS_CTRL_READY FIELD32(0x00000080) +#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000) + +/* + * HOST-MCU shared memory + */ +#define HOST_CMD_CSR 0x0404 +#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff) + +/* + * PBF registers + * Most are for debug. Driver doesn't touch PBF register. + */ +#define PBF_CFG 0x0408 +#define PBF_MAX_PCNT 0x040c +#define PBF_CTRL 0x0410 +#define PBF_INT_STA 0x0414 +#define PBF_INT_ENA 0x0418 + +/* + * BCN_OFFSET0: + */ +#define BCN_OFFSET0 0x042c +#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff) +#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00) +#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000) +#define BCN_OFFSET0_BCN3 FIELD32(0xff000000) + +/* + * BCN_OFFSET1: + */ +#define BCN_OFFSET1 0x0430 +#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff) +#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00) +#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000) +#define BCN_OFFSET1_BCN7 FIELD32(0xff000000) + +/* + * PBF registers + * Most are for debug. Driver doesn't touch PBF register. + */ +#define TXRXQ_PCNT 0x0438 +#define PBF_DBG 0x043c + +/* + * RF registers + */ +#define RF_CSR_CFG 0x0500 +#define RF_CSR_CFG_DATA FIELD32(0x000000ff) +#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) +#define RF_CSR_CFG_WRITE FIELD32(0x00010000) +#define RF_CSR_CFG_BUSY FIELD32(0x00020000) + +/* + * MAC Control/Status Registers(CSR). + * Some values are set in TU, whereas 1 TU == 1024 us. + */ + +/* + * MAC_CSR0: ASIC revision number. + * ASIC_REV: 0 + * ASIC_VER: 2860 or 2870 + */ +#define MAC_CSR0 0x1000 +#define MAC_CSR0_ASIC_REV FIELD32(0x0000ffff) +#define MAC_CSR0_ASIC_VER FIELD32(0xffff0000) + +/* + * MAC_SYS_CTRL: + */ +#define MAC_SYS_CTRL 0x1004 +#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001) +#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002) +#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004) +#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008) +#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010) +#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020) +#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040) +#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080) + +/* + * MAC_ADDR_DW0: STA MAC register 0 + */ +#define MAC_ADDR_DW0 0x1008 +#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff) +#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00) +#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000) +#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000) + +/* + * MAC_ADDR_DW1: STA MAC register 1 + * UNICAST_TO_ME_MASK: + * Used to mask off bits from byte 5 of the MAC address + * to determine the UNICAST_TO_ME bit for RX frames. + * The full mask is complemented by BSS_ID_MASK: + * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK + */ +#define MAC_ADDR_DW1 0x100c +#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff) +#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00) +#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) + +/* + * MAC_BSSID_DW0: BSSID register 0 + */ +#define MAC_BSSID_DW0 0x1010 +#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff) +#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00) +#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000) +#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000) + +/* + * MAC_BSSID_DW1: BSSID register 1 + * BSS_ID_MASK: + * 0: 1-BSSID mode (BSS index = 0) + * 1: 2-BSSID mode (BSS index: Byte5, bit 0) + * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1) + * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2) + * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the + * BSSID. This will make sure that those bits will be ignored + * when determining the MY_BSS of RX frames. + */ +#define MAC_BSSID_DW1 0x1014 +#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff) +#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00) +#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000) +#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000) + +/* + * MAX_LEN_CFG: Maximum frame length register. + * MAX_MPDU: rt2860b max 16k bytes + * MAX_PSDU: Maximum PSDU length + * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 + */ +#define MAX_LEN_CFG 0x1018 +#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff) +#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000) +#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000) +#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000) + +/* + * BBP_CSR_CFG: BBP serial control register + * VALUE: Register value to program into BBP + * REG_NUM: Selected BBP register + * READ_CONTROL: 0 write BBP, 1 read BBP + * BUSY: ASIC is busy executing BBP commands + * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks + * BBP_RW_MODE: 0 serial, 1 paralell + */ +#define BBP_CSR_CFG 0x101c +#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff) +#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00) +#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000) +#define BBP_CSR_CFG_BUSY FIELD32(0x00020000) +#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000) +#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000) + +/* + * RF_CSR_CFG0: RF control register + * REGID_AND_VALUE: Register value to program into RF + * BITWIDTH: Selected RF register + * STANDBYMODE: 0 high when standby, 1 low when standby + * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate + * BUSY: ASIC is busy executing RF commands + */ +#define RF_CSR_CFG0 0x1020 +#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff) +#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000) +#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff) +#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000) +#define RF_CSR_CFG0_SEL FIELD32(0x40000000) +#define RF_CSR_CFG0_BUSY FIELD32(0x80000000) + +/* + * RF_CSR_CFG1: RF control register + * REGID_AND_VALUE: Register value to program into RF + * RFGAP: Gap between BB_CONTROL_RF and RF_LE + * 0: 3 system clock cycle (37.5usec) + * 1: 5 system clock cycle (62.5usec) + */ +#define RF_CSR_CFG1 0x1024 +#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff) +#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000) + +/* + * RF_CSR_CFG2: RF control register + * VALUE: Register value to program into RF + */ +#define RF_CSR_CFG2 0x1028 +#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff) + +/* + * LED_CFG: LED control + * color LED's: + * 0: off + * 1: blinking upon TX2 + * 2: periodic slow blinking + * 3: always on + * LED polarity: + * 0: active low + * 1: active high + */ +#define LED_CFG 0x102c +#define LED_CFG_ON_PERIOD FIELD32(0x000000ff) +#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00) +#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000) +#define LED_CFG_R_LED_MODE FIELD32(0x03000000) +#define LED_CFG_G_LED_MODE FIELD32(0x0c000000) +#define LED_CFG_Y_LED_MODE FIELD32(0x30000000) +#define LED_CFG_LED_POLAR FIELD32(0x40000000) + +/* + * XIFS_TIME_CFG: MAC timing + * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX + * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX + * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX + * when MAC doesn't reference BBP signal BBRXEND + * EIFS: unit 1us + * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer + * + */ +#define XIFS_TIME_CFG 0x1100 +#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff) +#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00) +#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000) +#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000) +#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000) + +/* + * BKOFF_SLOT_CFG: + */ +#define BKOFF_SLOT_CFG 0x1104 +#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff) +#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00) + +/* + * NAV_TIME_CFG: + */ +#define NAV_TIME_CFG 0x1108 +#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff) +#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00) +#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000) +#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000) + +/* + * CH_TIME_CFG: count as channel busy + */ +#define CH_TIME_CFG 0x110c + +/* + * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us + */ +#define PBF_LIFE_TIMER 0x1110 + +/* + * BCN_TIME_CFG: + * BEACON_INTERVAL: in unit of 1/16 TU + * TSF_TICKING: Enable TSF auto counting + * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode + * BEACON_GEN: Enable beacon generator + */ +#define BCN_TIME_CFG 0x1114 +#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff) +#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000) +#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000) +#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000) +#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000) +#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000) + +/* + * TBTT_SYNC_CFG: + */ +#define TBTT_SYNC_CFG 0x1118 + +/* + * TSF_TIMER_DW0: Local lsb TSF timer, read-only + */ +#define TSF_TIMER_DW0 0x111c +#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff) + +/* + * TSF_TIMER_DW1: Local msb TSF timer, read-only + */ +#define TSF_TIMER_DW1 0x1120 +#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff) + +/* + * TBTT_TIMER: TImer remains till next TBTT, read-only + */ +#define TBTT_TIMER 0x1124 + +/* + * INT_TIMER_CFG: + */ +#define INT_TIMER_CFG 0x1128 + +/* + * INT_TIMER_EN: GP-timer and pre-tbtt Int enable + */ +#define INT_TIMER_EN 0x112c + +/* + * CH_IDLE_STA: channel idle time + */ +#define CH_IDLE_STA 0x1130 + +/* + * CH_BUSY_STA: channel busy time + */ +#define CH_BUSY_STA 0x1134 + +/* + * MAC_STATUS_CFG: + * BBP_RF_BUSY: When set to 0, BBP and RF are stable. + * if 1 or higher one of the 2 registers is busy. + */ +#define MAC_STATUS_CFG 0x1200 +#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003) + +/* + * PWR_PIN_CFG: + */ +#define PWR_PIN_CFG 0x1204 + +/* + * AUTOWAKEUP_CFG: Manual power control / status register + * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set + * AUTOWAKE: 0:sleep, 1:awake + */ +#define AUTOWAKEUP_CFG 0x1208 +#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff) +#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00) +#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000) + +/* + * EDCA_AC0_CFG: + */ +#define EDCA_AC0_CFG 0x1300 +#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) + +/* + * EDCA_AC1_CFG: + */ +#define EDCA_AC1_CFG 0x1304 +#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) + +/* + * EDCA_AC2_CFG: + */ +#define EDCA_AC2_CFG 0x1308 +#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) + +/* + * EDCA_AC3_CFG: + */ +#define EDCA_AC3_CFG 0x130c +#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) +#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) +#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) +#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) + +/* + * EDCA_TID_AC_MAP: + */ +#define EDCA_TID_AC_MAP 0x1310 + +/* + * TX_PWR_CFG_0: + */ +#define TX_PWR_CFG_0 0x1314 +#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f) +#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0) +#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00) +#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000) +#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000) +#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000) +#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000) +#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000) + +/* + * TX_PWR_CFG_1: + */ +#define TX_PWR_CFG_1 0x1318 +#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f) +#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0) +#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00) +#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000) +#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000) +#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000) +#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000) +#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000) + +/* + * TX_PWR_CFG_2: + */ +#define TX_PWR_CFG_2 0x131c +#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f) +#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0) +#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00) +#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000) +#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000) +#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000) +#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000) +#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000) + +/* + * TX_PWR_CFG_3: + */ +#define TX_PWR_CFG_3 0x1320 +#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f) +#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0) +#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00) +#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000) +#define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000) +#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000) +#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000) +#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000) + +/* + * TX_PWR_CFG_4: + */ +#define TX_PWR_CFG_4 0x1324 +#define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f) +#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0) +#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00) +#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000) + +/* + * TX_PIN_CFG: + */ +#define TX_PIN_CFG 0x1328 +#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001) +#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002) +#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004) +#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008) +#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010) +#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020) +#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040) +#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080) +#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100) +#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200) +#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400) +#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800) +#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000) +#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000) +#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000) +#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000) +#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000) +#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000) +#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000) +#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000) + +/* + * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz + */ +#define TX_BAND_CFG 0x132c +#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001) +#define TX_BAND_CFG_A FIELD32(0x00000002) +#define TX_BAND_CFG_BG FIELD32(0x00000004) + +/* + * TX_SW_CFG0: + */ +#define TX_SW_CFG0 0x1330 + +/* + * TX_SW_CFG1: + */ +#define TX_SW_CFG1 0x1334 + +/* + * TX_SW_CFG2: + */ +#define TX_SW_CFG2 0x1338 + +/* + * TXOP_THRES_CFG: + */ +#define TXOP_THRES_CFG 0x133c + +/* + * TXOP_CTRL_CFG: + */ +#define TXOP_CTRL_CFG 0x1340 + +/* + * TX_RTS_CFG: + * RTS_THRES: unit:byte + * RTS_FBK_EN: enable rts rate fallback + */ +#define TX_RTS_CFG 0x1344 +#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff) +#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00) +#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000) + +/* + * TX_TIMEOUT_CFG: + * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us + * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure + * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation. + * it is recommended that: + * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) + */ +#define TX_TIMEOUT_CFG 0x1348 +#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0) +#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00) +#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000) + +/* + * TX_RTY_CFG: + * SHORT_RTY_LIMIT: short retry limit + * LONG_RTY_LIMIT: long retry limit + * LONG_RTY_THRE: Long retry threshoold + * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode + * 0:expired by retry limit, 1: expired by mpdu life timer + * AGG_RTY_MODE: Aggregate MPDU retry mode + * 0:expired by retry limit, 1: expired by mpdu life timer + * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable + */ +#define TX_RTY_CFG 0x134c +#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff) +#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00) +#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000) +#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000) +#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000) +#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000) + +/* + * TX_LINK_CFG: + * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us + * MFB_ENABLE: TX apply remote MFB 1:enable + * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable + * 0: not apply remote remote unsolicit (MFS=7) + * TX_MRQ_EN: MCS request TX enable + * TX_RDG_EN: RDG TX enable + * TX_CF_ACK_EN: Piggyback CF-ACK enable + * REMOTE_MFB: remote MCS feedback + * REMOTE_MFS: remote MCS feedback sequence number + */ +#define TX_LINK_CFG 0x1350 +#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff) +#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100) +#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200) +#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400) +#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800) +#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000) +#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000) +#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000) + +/* + * HT_FBK_CFG0: + */ +#define HT_FBK_CFG0 0x1354 +#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f) +#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0) +#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00) +#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000) +#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000) +#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000) +#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000) +#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000) + +/* + * HT_FBK_CFG1: + */ +#define HT_FBK_CFG1 0x1358 +#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f) +#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0) +#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00) +#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000) +#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000) +#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000) +#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000) +#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000) + +/* + * LG_FBK_CFG0: + */ +#define LG_FBK_CFG0 0x135c +#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f) +#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0) +#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00) +#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000) +#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000) +#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000) +#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000) +#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000) + +/* + * LG_FBK_CFG1: + */ +#define LG_FBK_CFG1 0x1360 +#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f) +#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0) +#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00) +#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000) + +/* + * CCK_PROT_CFG: CCK Protection + * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd) + * PROTECT_CTRL: Protection control frame type for CCK TX + * 0:none, 1:RTS/CTS, 2:CTS-to-self + * PROTECT_NAV: TXOP protection type for CCK TX + * 0:none, 1:ShortNAVprotect, 2:LongNAVProtect + * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow + * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow + * RTS_TH_EN: RTS threshold enable on CCK TX + */ +#define CCK_PROT_CFG 0x1364 +#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define CCK_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * OFDM_PROT_CFG: OFDM Protection + */ +#define OFDM_PROT_CFG 0x1368 +#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define OFDM_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * MM20_PROT_CFG: MM20 Protection + */ +#define MM20_PROT_CFG 0x136c +#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define MM20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * MM40_PROT_CFG: MM40 Protection + */ +#define MM40_PROT_CFG 0x1370 +#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define MM40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * GF20_PROT_CFG: GF20 Protection + */ +#define GF20_PROT_CFG 0x1374 +#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define GF20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * GF40_PROT_CFG: GF40 Protection + */ +#define GF40_PROT_CFG 0x1378 +#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) +#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) +#define GF40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) +#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) +#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) +#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) +#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) +#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) +#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) +#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) + +/* + * EXP_CTS_TIME: + */ +#define EXP_CTS_TIME 0x137c + +/* + * EXP_ACK_TIME: + */ +#define EXP_ACK_TIME 0x1380 + +/* + * RX_FILTER_CFG: RX configuration register. + */ +#define RX_FILTER_CFG 0x1400 +#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001) +#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002) +#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004) +#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008) +#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010) +#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020) +#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040) +#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080) +#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100) +#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200) +#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400) +#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800) +#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000) +#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000) +#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000) +#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000) +#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000) + +/* + * AUTO_RSP_CFG: + * AUTORESPONDER: 0: disable, 1: enable + * BAC_ACK_POLICY: 0:long, 1:short preamble + * CTS_40_MMODE: Response CTS 40MHz duplicate mode + * CTS_40_MREF: Response CTS 40MHz duplicate mode + * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble + * DUAL_CTS_EN: Power bit value in control frame + * ACK_CTS_PSM_BIT:Power bit value in control frame + */ +#define AUTO_RSP_CFG 0x1404 +#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001) +#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002) +#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004) +#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008) +#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010) +#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040) +#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080) + +/* + * LEGACY_BASIC_RATE: + */ +#define LEGACY_BASIC_RATE 0x1408 + +/* + * HT_BASIC_RATE: + */ +#define HT_BASIC_RATE 0x140c + +/* + * HT_CTRL_CFG: + */ +#define HT_CTRL_CFG 0x1410 + +/* + * SIFS_COST_CFG: + */ +#define SIFS_COST_CFG 0x1414 + +/* + * RX_PARSER_CFG: + * Set NAV for all received frames + */ +#define RX_PARSER_CFG 0x1418 + +/* + * TX_SEC_CNT0: + */ +#define TX_SEC_CNT0 0x1500 + +/* + * RX_SEC_CNT0: + */ +#define RX_SEC_CNT0 0x1504 + +/* + * CCMP_FC_MUTE: + */ +#define CCMP_FC_MUTE 0x1508 + +/* + * TXOP_HLDR_ADDR0: + */ +#define TXOP_HLDR_ADDR0 0x1600 + +/* + * TXOP_HLDR_ADDR1: + */ +#define TXOP_HLDR_ADDR1 0x1604 + +/* + * TXOP_HLDR_ET: + */ +#define TXOP_HLDR_ET 0x1608 + +/* + * QOS_CFPOLL_RA_DW0: + */ +#define QOS_CFPOLL_RA_DW0 0x160c + +/* + * QOS_CFPOLL_RA_DW1: + */ +#define QOS_CFPOLL_RA_DW1 0x1610 + +/* + * QOS_CFPOLL_QC: + */ +#define QOS_CFPOLL_QC 0x1614 + +/* + * RX_STA_CNT0: RX PLCP error count & RX CRC error count + */ +#define RX_STA_CNT0 0x1700 +#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff) +#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000) + +/* + * RX_STA_CNT1: RX False CCA count & RX LONG frame count + */ +#define RX_STA_CNT1 0x1704 +#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff) +#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000) + +/* + * RX_STA_CNT2: + */ +#define RX_STA_CNT2 0x1708 +#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff) +#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000) + +/* + * TX_STA_CNT0: TX Beacon count + */ +#define TX_STA_CNT0 0x170c +#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff) +#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000) + +/* + * TX_STA_CNT1: TX tx count + */ +#define TX_STA_CNT1 0x1710 +#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff) +#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000) + +/* + * TX_STA_CNT2: TX tx count + */ +#define TX_STA_CNT2 0x1714 +#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff) +#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000) + +/* + * TX_STA_FIFO: TX Result for specific PID status fifo register + */ +#define TX_STA_FIFO 0x1718 +#define TX_STA_FIFO_VALID FIELD32(0x00000001) +#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e) +#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020) +#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040) +#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080) +#define TX_STA_FIFO_WCID FIELD32(0x0000ff00) +#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000) +#define TX_STA_FIFO_MCS FIELD32(0x007f0000) +#define TX_STA_FIFO_PHYMODE FIELD32(0xc0000000) + +/* + * TX_AGG_CNT: Debug counter + */ +#define TX_AGG_CNT 0x171c +#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT0: + */ +#define TX_AGG_CNT0 0x1720 +#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT1: + */ +#define TX_AGG_CNT1 0x1724 +#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT2: + */ +#define TX_AGG_CNT2 0x1728 +#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT3: + */ +#define TX_AGG_CNT3 0x172c +#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT4: + */ +#define TX_AGG_CNT4 0x1730 +#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT5: + */ +#define TX_AGG_CNT5 0x1734 +#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT6: + */ +#define TX_AGG_CNT6 0x1738 +#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000) + +/* + * TX_AGG_CNT7: + */ +#define TX_AGG_CNT7 0x173c +#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff) +#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000) + +/* + * MPDU_DENSITY_CNT: + * TX_ZERO_DEL: TX zero length delimiter count + * RX_ZERO_DEL: RX zero length delimiter count + */ +#define MPDU_DENSITY_CNT 0x1740 +#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff) +#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000) + +/* + * Security key table memory. + * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry + * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry + * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry + * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry + * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry + * SHARED_KEY_MODE_BASE: 4-byte * 16-entry + */ +#define MAC_WCID_BASE 0x1800 +#define PAIRWISE_KEY_TABLE_BASE 0x4000 +#define MAC_IVEIV_TABLE_BASE 0x6000 +#define MAC_WCID_ATTRIBUTE_BASE 0x6800 +#define SHARED_KEY_TABLE_BASE 0x6c00 +#define SHARED_KEY_MODE_BASE 0x7000 + +#define MAC_WCID_ENTRY(__idx) \ + ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) ) +#define PAIRWISE_KEY_ENTRY(__idx) \ + ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) +#define MAC_IVEIV_ENTRY(__idx) \ + ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) ) +#define MAC_WCID_ATTR_ENTRY(__idx) \ + ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) +#define SHARED_KEY_ENTRY(__idx) \ + ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) +#define SHARED_KEY_MODE_ENTRY(__idx) \ + ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) ) + +struct mac_wcid_entry { + u8 mac[6]; + u8 reserved[2]; +} __attribute__ ((packed)); + +struct hw_key_entry { + u8 key[16]; + u8 tx_mic[8]; + u8 rx_mic[8]; +} __attribute__ ((packed)); + +struct mac_iveiv_entry { + u8 iv[8]; +} __attribute__ ((packed)); + +/* + * MAC_WCID_ATTRIBUTE: + */ +#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001) +#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e) +#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070) +#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380) + +/* + * SHARED_KEY_MODE: + */ +#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007) +#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070) +#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700) +#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000) +#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000) +#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000) +#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000) +#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000) + +/* + * HOST-MCU communication + */ + +/* + * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. + */ +#define H2M_MAILBOX_CSR 0x7010 +#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) +#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) +#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) +#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) + +/* + * H2M_MAILBOX_CID: + */ +#define H2M_MAILBOX_CID 0x7014 +#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff) +#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00) +#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000) +#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000) + +/* + * H2M_MAILBOX_STATUS: + */ +#define H2M_MAILBOX_STATUS 0x701c + +/* + * H2M_INT_SRC: + */ +#define H2M_INT_SRC 0x7024 + +/* + * H2M_BBP_AGENT: + */ +#define H2M_BBP_AGENT 0x7028 + +/* + * MCU_LEDCS: LED control for MCU Mailbox. + */ +#define MCU_LEDCS_LED_MODE FIELD8(0x1f) +#define MCU_LEDCS_POLARITY FIELD8(0x01) + +/* + * HW_CS_CTS_BASE: + * Carrier-sense CTS frame base address. + * It's where mac stores carrier-sense frame for carrier-sense function. + */ +#define HW_CS_CTS_BASE 0x7700 + +/* + * HW_DFS_CTS_BASE: + * DFS CTS frame base address. It's where mac stores CTS frame for DFS. + */ +#define HW_DFS_CTS_BASE 0x7780 + +/* + * TXRX control registers - base address 0x3000 + */ + +/* + * TXRX_CSR1: + * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. + */ +#define TXRX_CSR1 0x77d0 + +/* + * HW_DEBUG_SETTING_BASE: + * since NULL frame won't be that long (256 byte) + * We steal 16 tail bytes to save debugging settings + */ +#define HW_DEBUG_SETTING_BASE 0x77f0 +#define HW_DEBUG_SETTING_BASE2 0x7770 + +/* + * HW_BEACON_BASE + * In order to support maximum 8 MBSS and its maximum length + * is 512 bytes for each beacon + * Three section discontinue memory segments will be used. + * 1. The original region for BCN 0~3 + * 2. Extract memory from FCE table for BCN 4~5 + * 3. Extract memory from Pair-wise key table for BCN 6~7 + * It occupied those memory of wcid 238~253 for BCN 6 + * and wcid 222~237 for BCN 7 + * + * IMPORTANT NOTE: Not sure why legacy driver does this, + * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6. + */ +#define HW_BEACON_BASE0 0x7800 +#define HW_BEACON_BASE1 0x7a00 +#define HW_BEACON_BASE2 0x7c00 +#define HW_BEACON_BASE3 0x7e00 +#define HW_BEACON_BASE4 0x7200 +#define HW_BEACON_BASE5 0x7400 +#define HW_BEACON_BASE6 0x5dc0 +#define HW_BEACON_BASE7 0x5bc0 + +#define HW_BEACON_OFFSET(__index) \ + ( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \ + (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \ + (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) ) + +/* + * BBP registers. + * The wordsize of the BBP is 8 bits. + */ + +/* + * BBP 1: TX Antenna + */ +#define BBP1_TX_POWER FIELD8(0x07) +#define BBP1_TX_ANTENNA FIELD8(0x18) + +/* + * BBP 3: RX Antenna + */ +#define BBP3_RX_ANTENNA FIELD8(0x18) +#define BBP3_HT40_PLUS FIELD8(0x20) + +/* + * BBP 4: Bandwidth + */ +#define BBP4_TX_BF FIELD8(0x01) +#define BBP4_BANDWIDTH FIELD8(0x18) + +/* + * RFCSR registers + * The wordsize of the RFCSR is 8 bits. + */ + +/* + * RFCSR 6: + */ +#define RFCSR6_R FIELD8(0x03) + +/* + * RFCSR 7: + */ +#define RFCSR7_RF_TUNING FIELD8(0x01) + +/* + * RFCSR 12: + */ +#define RFCSR12_TX_POWER FIELD8(0x1f) + +/* + * RFCSR 22: + */ +#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) + +/* + * RFCSR 23: + */ +#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) + +/* + * RFCSR 30: + */ +#define RFCSR30_RF_CALIBRATION FIELD8(0x80) + +/* + * RF registers + */ + +/* + * RF 2 + */ +#define RF2_ANTENNA_RX2 FIELD32(0x00000040) +#define RF2_ANTENNA_TX1 FIELD32(0x00004000) +#define RF2_ANTENNA_RX1 FIELD32(0x00020000) + +/* + * RF 3 + */ +#define RF3_TXPOWER_G FIELD32(0x00003e00) +#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200) +#define RF3_TXPOWER_A FIELD32(0x00003c00) + +/* + * RF 4 + */ +#define RF4_TXPOWER_G FIELD32(0x000007c0) +#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040) +#define RF4_TXPOWER_A FIELD32(0x00000780) +#define RF4_FREQ_OFFSET FIELD32(0x001f8000) +#define RF4_HT40 FIELD32(0x00200000) + +/* + * EEPROM content. + * The wordsize of the EEPROM is 16 bits. + */ + +/* + * EEPROM Version + */ +#define EEPROM_VERSION 0x0001 +#define EEPROM_VERSION_FAE FIELD16(0x00ff) +#define EEPROM_VERSION_VERSION FIELD16(0xff00) + +/* + * HW MAC address. + */ +#define EEPROM_MAC_ADDR_0 0x0002 +#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) +#define EEPROM_MAC_ADDR_1 0x0003 +#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) +#define EEPROM_MAC_ADDR_2 0x0004 +#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) +#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) + +/* + * EEPROM ANTENNA config + * RXPATH: 1: 1R, 2: 2R, 3: 3R + * TXPATH: 1: 1T, 2: 2T + */ +#define EEPROM_ANTENNA 0x001a +#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f) +#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0) +#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00) + +/* + * EEPROM NIC config + * CARDBUS_ACCEL: 0 - enable, 1 - disable + */ +#define EEPROM_NIC 0x001b +#define EEPROM_NIC_HW_RADIO FIELD16(0x0001) +#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002) +#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004) +#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008) +#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010) +#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020) +#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040) +#define EEPROM_NIC_WPS_PBC FIELD16(0x0080) +#define EEPROM_NIC_BW40M_BG FIELD16(0x0100) +#define EEPROM_NIC_BW40M_A FIELD16(0x0200) + +/* + * EEPROM frequency + */ +#define EEPROM_FREQ 0x001d +#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) +#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00) +#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000) + +/* + * EEPROM LED + * POLARITY_RDY_G: Polarity RDY_G setting. + * POLARITY_RDY_A: Polarity RDY_A setting. + * POLARITY_ACT: Polarity ACT setting. + * POLARITY_GPIO_0: Polarity GPIO0 setting. + * POLARITY_GPIO_1: Polarity GPIO1 setting. + * POLARITY_GPIO_2: Polarity GPIO2 setting. + * POLARITY_GPIO_3: Polarity GPIO3 setting. + * POLARITY_GPIO_4: Polarity GPIO4 setting. + * LED_MODE: Led mode. + */ +#define EEPROM_LED1 0x001e +#define EEPROM_LED2 0x001f +#define EEPROM_LED3 0x0020 +#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001) +#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) +#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) +#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) +#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) +#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) +#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) +#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) +#define EEPROM_LED_LED_MODE FIELD16(0x1f00) + +/* + * EEPROM LNA + */ +#define EEPROM_LNA 0x0022 +#define EEPROM_LNA_BG FIELD16(0x00ff) +#define EEPROM_LNA_A0 FIELD16(0xff00) + +/* + * EEPROM RSSI BG offset + */ +#define EEPROM_RSSI_BG 0x0023 +#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff) +#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00) + +/* + * EEPROM RSSI BG2 offset + */ +#define EEPROM_RSSI_BG2 0x0024 +#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff) +#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00) + +/* + * EEPROM RSSI A offset + */ +#define EEPROM_RSSI_A 0x0025 +#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff) +#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00) + +/* + * EEPROM RSSI A2 offset + */ +#define EEPROM_RSSI_A2 0x0026 +#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff) +#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00) + +/* + * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power. + * This is delta in 40MHZ. + * VALUE: Tx Power dalta value (MAX=4) + * TYPE: 1: Plus the delta value, 0: minus the delta value + * TXPOWER: Enable: + */ +#define EEPROM_TXPOWER_DELTA 0x0028 +#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f) +#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040) +#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080) + +/* + * EEPROM TXPOWER 802.11BG + */ +#define EEPROM_TXPOWER_BG1 0x0029 +#define EEPROM_TXPOWER_BG2 0x0030 +#define EEPROM_TXPOWER_BG_SIZE 7 +#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff) +#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00) + +/* + * EEPROM TXPOWER 802.11A + */ +#define EEPROM_TXPOWER_A1 0x003c +#define EEPROM_TXPOWER_A2 0x0053 +#define EEPROM_TXPOWER_A_SIZE 6 +#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) +#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) + +/* + * EEPROM TXpower byrate: 20MHZ power + */ +#define EEPROM_TXPOWER_BYRATE 0x006f + +/* + * EEPROM BBP. + */ +#define EEPROM_BBP_START 0x0078 +#define EEPROM_BBP_SIZE 16 +#define EEPROM_BBP_VALUE FIELD16(0x00ff) +#define EEPROM_BBP_REG_ID FIELD16(0xff00) + +/* + * MCU mailbox commands. + */ +#define MCU_SLEEP 0x30 +#define MCU_WAKEUP 0x31 +#define MCU_RADIO_OFF 0x35 +#define MCU_CURRENT 0x36 +#define MCU_LED 0x50 +#define MCU_LED_STRENGTH 0x51 +#define MCU_LED_1 0x52 +#define MCU_LED_2 0x53 +#define MCU_LED_3 0x54 +#define MCU_RADAR 0x60 +#define MCU_BOOT_SIGNAL 0x72 +#define MCU_BBP_SIGNAL 0x80 +#define MCU_POWER_SAVE 0x83 + +/* + * MCU mailbox tokens + */ +#define TOKEN_WAKUP 3 + +/* + * DMA descriptor defines. + */ +#define TXWI_DESC_SIZE ( 4 * sizeof(__le32) ) +#define RXWI_DESC_SIZE ( 4 * sizeof(__le32) ) + +/* + * TX WI structure + */ + +/* + * Word0 + * FRAG: 1 To inform TKIP engine this is a fragment. + * MIMO_PS: The remote peer is in dynamic MIMO-PS mode + * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs + * BW: Channel bandwidth 20MHz or 40 MHz + * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED + */ +#define TXWI_W0_FRAG FIELD32(0x00000001) +#define TXWI_W0_MIMO_PS FIELD32(0x00000002) +#define TXWI_W0_CF_ACK FIELD32(0x00000004) +#define TXWI_W0_TS FIELD32(0x00000008) +#define TXWI_W0_AMPDU FIELD32(0x00000010) +#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0) +#define TXWI_W0_TX_OP FIELD32(0x00000300) +#define TXWI_W0_MCS FIELD32(0x007f0000) +#define TXWI_W0_BW FIELD32(0x00800000) +#define TXWI_W0_SHORT_GI FIELD32(0x01000000) +#define TXWI_W0_STBC FIELD32(0x06000000) +#define TXWI_W0_IFS FIELD32(0x08000000) +#define TXWI_W0_PHYMODE FIELD32(0xc0000000) + +/* + * Word1 + */ +#define TXWI_W1_ACK FIELD32(0x00000001) +#define TXWI_W1_NSEQ FIELD32(0x00000002) +#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc) +#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00) +#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) +#define TXWI_W1_PACKETID FIELD32(0xf0000000) + +/* + * Word2 + */ +#define TXWI_W2_IV FIELD32(0xffffffff) + +/* + * Word3 + */ +#define TXWI_W3_EIV FIELD32(0xffffffff) + +/* + * RX WI structure + */ + +/* + * Word0 + */ +#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff) +#define RXWI_W0_KEY_INDEX FIELD32(0x00000300) +#define RXWI_W0_BSSID FIELD32(0x00001c00) +#define RXWI_W0_UDF FIELD32(0x0000e000) +#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) +#define RXWI_W0_TID FIELD32(0xf0000000) + +/* + * Word1 + */ +#define RXWI_W1_FRAG FIELD32(0x0000000f) +#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0) +#define RXWI_W1_MCS FIELD32(0x007f0000) +#define RXWI_W1_BW FIELD32(0x00800000) +#define RXWI_W1_SHORT_GI FIELD32(0x01000000) +#define RXWI_W1_STBC FIELD32(0x06000000) +#define RXWI_W1_PHYMODE FIELD32(0xc0000000) + +/* + * Word2 + */ +#define RXWI_W2_RSSI0 FIELD32(0x000000ff) +#define RXWI_W2_RSSI1 FIELD32(0x0000ff00) +#define RXWI_W2_RSSI2 FIELD32(0x00ff0000) + +/* + * Word3 + */ +#define RXWI_W3_SNR0 FIELD32(0x000000ff) +#define RXWI_W3_SNR1 FIELD32(0x0000ff00) + +/* + * Macros for converting txpower from EEPROM to mac80211 value + * and from mac80211 value to register value. + */ +#define MIN_G_TXPOWER 0 +#define MIN_A_TXPOWER -7 +#define MAX_G_TXPOWER 31 +#define MAX_A_TXPOWER 15 +#define DEFAULT_TXPOWER 5 + +#define TXPOWER_G_FROM_DEV(__txpower) \ + ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_G_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER) + +#define TXPOWER_A_FROM_DEV(__txpower) \ + ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) + +#define TXPOWER_A_TO_DEV(__txpower) \ + clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER) + +#endif /* RT2800_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c new file mode 100644 index 000000000000..5c7d74a6f16e --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -0,0 +1,1817 @@ +/* + Copyright (C) 2009 Bartlomiej Zolnierkiewicz + + Based on the original rt2800pci.c and rt2800usb.c: + + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + <http://rt2x00.serialmonkey.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + Module: rt2800lib + Abstract: rt2800 generic device routines. + */ + +#include <linux/kernel.h> +#include <linux/module.h> + +#include "rt2x00.h" +#ifdef CONFIG_RT2800USB +#include "rt2x00usb.h" +#endif +#include "rt2800lib.h" +#include "rt2800.h" +#include "rt2800usb.h" + +MODULE_AUTHOR("Bartlomiej Zolnierkiewicz"); +MODULE_DESCRIPTION("rt2800 library"); +MODULE_LICENSE("GPL"); + +/* + * Register access. + * All access to the CSR registers will go through the methods + * rt2800_register_read and rt2800_register_write. + * BBP and RF register require indirect register access, + * and use the CSR registers BBPCSR and RFCSR to achieve this. + * These indirect registers work with busy bits, + * and we will try maximal REGISTER_BUSY_COUNT times to access + * the register while taking a REGISTER_BUSY_DELAY us delay + * between each attampt. When the busy bit is still set at that time, + * the access attempt is considered to have failed, + * and we will print an error. + * The _lock versions must be used if you already hold the csr_mutex + */ +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) +#define WAIT_FOR_RFCSR(__dev, __reg) \ + rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) +#define WAIT_FOR_MCU(__dev, __reg) \ + rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \ + H2M_MAILBOX_CSR_OWNER, (__reg)) + +static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value); + rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); + rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0); + if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); + + rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev, + const unsigned int word, u8 *value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. + */ + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); + rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1); + if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); + + rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); + + WAIT_FOR_BBP(rt2x00dev, ®); + } + + *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE); + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u8 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the RFCSR becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); + + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev, + const unsigned int word, u8 *value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the RFCSR becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. + */ + if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); + rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); + rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); + + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); + + WAIT_FOR_RFCSR(rt2x00dev, ®); + } + + *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev, + const unsigned int word, const u32 value) +{ + u32 reg; + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value); + rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0); + rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0); + rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1); + + rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg); + rt2x00_rf_write(rt2x00dev, word, value); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} + +void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, + const u8 command, const u8 token, + const u8 arg0, const u8 arg1) +{ + u32 reg; + + if (rt2x00_intf_is_pci(rt2x00dev)) { + /* + * RT2880 and RT3052 don't support MCU requests. + */ + if (rt2x00_rt(&rt2x00dev->chip, RT2880) || + rt2x00_rt(&rt2x00dev->chip, RT3052)) + return; + } + + mutex_lock(&rt2x00dev->csr_mutex); + + /* + * Wait until the MCU becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_MCU(rt2x00dev, ®)) { + rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); + rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg); + + reg = 0; + rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); + rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg); + } + + mutex_unlock(&rt2x00dev->csr_mutex); +} +EXPORT_SYMBOL_GPL(rt2800_mcu_request); + +#ifdef CONFIG_RT2X00_LIB_DEBUGFS +const struct rt2x00debug rt2800_rt2x00debug = { + .owner = THIS_MODULE, + .csr = { + .read = rt2800_register_read, + .write = rt2800_register_write, + .flags = RT2X00DEBUGFS_OFFSET, + .word_base = CSR_REG_BASE, + .word_size = sizeof(u32), + .word_count = CSR_REG_SIZE / sizeof(u32), + }, + .eeprom = { + .read = rt2x00_eeprom_read, + .write = rt2x00_eeprom_write, + .word_base = EEPROM_BASE, + .word_size = sizeof(u16), + .word_count = EEPROM_SIZE / sizeof(u16), + }, + .bbp = { + .read = rt2800_bbp_read, + .write = rt2800_bbp_write, + .word_base = BBP_BASE, + .word_size = sizeof(u8), + .word_count = BBP_SIZE / sizeof(u8), + }, + .rf = { + .read = rt2x00_rf_read, + .write = rt2800_rf_write, + .word_base = RF_BASE, + .word_size = sizeof(u32), + .word_count = RF_SIZE / sizeof(u32), + }, +}; +EXPORT_SYMBOL_GPL(rt2800_rt2x00debug); +#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ + +int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); + return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); +} +EXPORT_SYMBOL_GPL(rt2800_rfkill_poll); + +#ifdef CONFIG_RT2X00_LIB_LEDS +static void rt2800_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + unsigned int enabled = brightness != LED_OFF; + unsigned int bg_mode = + (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); + unsigned int polarity = + rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, + EEPROM_FREQ_LED_POLARITY); + unsigned int ledmode = + rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, + EEPROM_FREQ_LED_MODE); + + if (led->type == LED_TYPE_RADIO) { + rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, + enabled ? 0x20 : 0); + } else if (led->type == LED_TYPE_ASSOC) { + rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, + enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); + } else if (led->type == LED_TYPE_QUALITY) { + /* + * The brightness is divided into 6 levels (0 - 5), + * The specs tell us the following levels: + * 0, 1 ,3, 7, 15, 31 + * to determine the level in a simple way we can simply + * work with bitshifting: + * (1 << level) - 1 + */ + rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, + (1 << brightness / (LED_FULL / 6)) - 1, + polarity); + } +} + +static int rt2800_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) +{ + struct rt2x00_led *led = + container_of(led_cdev, struct rt2x00_led, led_dev); + u32 reg; + + rt2800_register_read(led->rt2x00dev, LED_CFG, ®); + rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on); + rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); + rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); + rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); + rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); + rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); + rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); + rt2800_register_write(led->rt2x00dev, LED_CFG, reg); + + return 0; +} + +void rt2800_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, enum led_type type) +{ + led->rt2x00dev = rt2x00dev; + led->type = type; + led->led_dev.brightness_set = rt2800_brightness_set; + led->led_dev.blink_set = rt2800_blink_set; + led->flags = LED_INITIALIZED; +} +EXPORT_SYMBOL_GPL(rt2800_init_led); +#endif /* CONFIG_RT2X00_LIB_LEDS */ + +/* + * Configuration handlers. + */ +static void rt2800_config_wcid_attr(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct mac_wcid_entry wcid_entry; + struct mac_iveiv_entry iveiv_entry; + u32 offset; + u32 reg; + + offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); + + rt2800_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, + !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, + (crypto->cmd == SET_KEY) * crypto->cipher); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, + (crypto->cmd == SET_KEY) * crypto->bssidx); + rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); + rt2800_register_write(rt2x00dev, offset, reg); + + offset = MAC_IVEIV_ENTRY(key->hw_key_idx); + + memset(&iveiv_entry, 0, sizeof(iveiv_entry)); + if ((crypto->cipher == CIPHER_TKIP) || + (crypto->cipher == CIPHER_TKIP_NO_MIC) || + (crypto->cipher == CIPHER_AES)) + iveiv_entry.iv[3] |= 0x20; + iveiv_entry.iv[3] |= key->keyidx << 6; + rt2800_register_multiwrite(rt2x00dev, offset, + &iveiv_entry, sizeof(iveiv_entry)); + + offset = MAC_WCID_ENTRY(key->hw_key_idx); + + memset(&wcid_entry, 0, sizeof(wcid_entry)); + if (crypto->cmd == SET_KEY) + memcpy(&wcid_entry, crypto->address, ETH_ALEN); + rt2800_register_multiwrite(rt2x00dev, offset, + &wcid_entry, sizeof(wcid_entry)); +} + +int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + struct rt2x00_field32 field; + u32 offset; + u32 reg; + + if (crypto->cmd == SET_KEY) { + key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; + + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + offset = SHARED_KEY_ENTRY(key->hw_key_idx); + rt2800_register_multiwrite(rt2x00dev, offset, + &key_entry, sizeof(key_entry)); + } + + /* + * The cipher types are stored over multiple registers + * starting with SHARED_KEY_MODE_BASE each word will have + * 32 bits and contains the cipher types for 2 bssidx each. + * Using the correct defines correctly will cause overhead, + * so just calculate the correct offset. + */ + field.bit_offset = 4 * (key->hw_key_idx % 8); + field.bit_mask = 0x7 << field.bit_offset; + + offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); + + rt2800_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, field, + (crypto->cmd == SET_KEY) * crypto->cipher); + rt2800_register_write(rt2x00dev, offset, reg); + + /* + * Update WCID information + */ + rt2800_config_wcid_attr(rt2x00dev, crypto, key); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_config_shared_key); + +int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key) +{ + struct hw_key_entry key_entry; + u32 offset; + + if (crypto->cmd == SET_KEY) { + /* + * 1 pairwise key is possible per AID, this means that the AID + * equals our hw_key_idx. Make sure the WCID starts _after_ the + * last possible shared key entry. + */ + if (crypto->aid > (256 - 32)) + return -ENOSPC; + + key->hw_key_idx = 32 + crypto->aid; + + memcpy(key_entry.key, crypto->key, + sizeof(key_entry.key)); + memcpy(key_entry.tx_mic, crypto->tx_mic, + sizeof(key_entry.tx_mic)); + memcpy(key_entry.rx_mic, crypto->rx_mic, + sizeof(key_entry.rx_mic)); + + offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); + rt2800_register_multiwrite(rt2x00dev, offset, + &key_entry, sizeof(key_entry)); + } + + /* + * Update WCID information + */ + rt2800_config_wcid_attr(rt2x00dev, crypto, key); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key); + +void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags) +{ + u32 reg; + + /* + * Start configuration steps. + * Note that the version error will always be dropped + * and broadcast frames will always be accepted since + * there is no filter for it at this time. + */ + rt2800_register_read(rt2x00dev, RX_FILTER_CFG, ®); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, + !(filter_flags & FIF_FCSFAIL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, + !(filter_flags & FIF_PLCPFAIL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, + !(filter_flags & FIF_PROMISC_IN_BSS)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, + !(filter_flags & FIF_ALLMULTI)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, + !(filter_flags & FIF_PSPOLL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, + !(filter_flags & FIF_CONTROL)); + rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg); +} +EXPORT_SYMBOL_GPL(rt2800_config_filter); + +void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, const unsigned int flags) +{ + unsigned int beacon_base; + u32 reg; + + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Clear current synchronisation setup. + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); + rt2800_register_write(rt2x00dev, beacon_base, 0); + + /* + * Enable synchronisation. + */ + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + } + + if (flags & CONFIG_UPDATE_MAC) { + reg = le32_to_cpu(conf->mac[1]); + rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); + conf->mac[1] = cpu_to_le32(reg); + + rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, + conf->mac, sizeof(conf->mac)); + } + + if (flags & CONFIG_UPDATE_BSSID) { + reg = le32_to_cpu(conf->bssid[1]); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); + conf->bssid[1] = cpu_to_le32(reg); + + rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, + conf->bssid, sizeof(conf->bssid)); + } +} +EXPORT_SYMBOL_GPL(rt2800_config_intf); + +void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20); + rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); + + rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®); + rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, + !!erp->short_preamble); + rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, + !!erp->short_preamble); + rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); + + rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, + erp->cts_protection ? 2 : 0); + rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, + erp->basic_rates); + rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); + + rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); + rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); + rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); + + rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, ®); + rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs); + rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs); + rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); + rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); + rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); + rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg); + + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, + erp->beacon_int * 16); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); +} +EXPORT_SYMBOL_GPL(rt2800_config_erp); + +void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant) +{ + u8 r1; + u8 r3; + + rt2800_bbp_read(rt2x00dev, 1, &r1); + rt2800_bbp_read(rt2x00dev, 3, &r3); + + /* + * Configure the TX antenna. + */ + switch ((int)ant->tx) { + case 1: + rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); + if (rt2x00_intf_is_pci(rt2x00dev)) + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); + break; + case 2: + rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); + break; + case 3: + /* Do nothing */ + break; + } + + /* + * Configure the RX antenna. + */ + switch ((int)ant->rx) { + case 1: + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); + break; + case 2: + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); + break; + case 3: + rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); + break; + } + + rt2800_bbp_write(rt2x00dev, 3, r3); + rt2800_bbp_write(rt2x00dev, 1, r1); +} +EXPORT_SYMBOL_GPL(rt2800_config_ant); + +static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u16 eeprom; + short lna_gain; + + if (libconf->rf.channel <= 14) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); + } else if (libconf->rf.channel <= 64) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); + } else if (libconf->rf.channel <= 128) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1); + } else { + rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); + lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2); + } + + rt2x00dev->lna_gain = lna_gain; +} + +static void rt2800_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); + + if (rt2x00dev->default_ant.tx == 1) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); + + if (rt2x00dev->default_ant.rx == 1) { + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); + } else if (rt2x00dev->default_ant.rx == 2) + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); + + if (rf->channel > 14) { + /* + * When TX power is below 0, we should increase it by 7 to + * make it a positive value (Minumum value is -7). + * However this means that values between 0 and 7 have + * double meaning, and we should set a 7DBm boost flag. + */ + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, + (info->tx_power1 >= 0)); + + if (info->tx_power1 < 0) + info->tx_power1 += 7; + + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, + TXPOWER_A_TO_DEV(info->tx_power1)); + + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, + (info->tx_power2 >= 0)); + + if (info->tx_power2 < 0) + info->tx_power2 += 7; + + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, + TXPOWER_A_TO_DEV(info->tx_power2)); + } else { + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, + TXPOWER_G_TO_DEV(info->tx_power1)); + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, + TXPOWER_G_TO_DEV(info->tx_power2)); + } + + rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); + + rt2800_rf_write(rt2x00dev, 1, rf->rf1); + rt2800_rf_write(rt2x00dev, 2, rf->rf2); + rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt2800_rf_write(rt2x00dev, 1, rf->rf1); + rt2800_rf_write(rt2x00dev, 2, rf->rf2); + rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); + rt2800_rf_write(rt2x00dev, 4, rf->rf4); + + udelay(200); + + rt2800_rf_write(rt2x00dev, 1, rf->rf1); + rt2800_rf_write(rt2x00dev, 2, rf->rf2); + rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800_rf_write(rt2x00dev, 4, rf->rf4); +} + +static void rt2800_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u8 rfcsr; + + rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1); + rt2800_rfcsr_write(rt2x00dev, 2, rf->rf3); + + rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); + rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); + + rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, + TXPOWER_G_TO_DEV(info->tx_power1)); + rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); + + rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); + rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); + + rt2800_rfcsr_write(rt2x00dev, 24, + rt2x00dev->calibration[conf_is_ht40(conf)]); + + rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); + rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); +} + +static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, + struct ieee80211_conf *conf, + struct rf_channel *rf, + struct channel_info *info) +{ + u32 reg; + unsigned int tx_pin; + u8 bbp; + + if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) + rt2800_config_channel_rt2x(rt2x00dev, conf, rf, info); + else + rt2800_config_channel_rt3x(rt2x00dev, conf, rf, info); + + /* + * Change BBP settings + */ + rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); + rt2800_bbp_write(rt2x00dev, 86, 0); + + if (rf->channel <= 14) { + if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { + rt2800_bbp_write(rt2x00dev, 82, 0x62); + rt2800_bbp_write(rt2x00dev, 75, 0x46); + } else { + rt2800_bbp_write(rt2x00dev, 82, 0x84); + rt2800_bbp_write(rt2x00dev, 75, 0x50); + } + } else { + rt2800_bbp_write(rt2x00dev, 82, 0xf2); + + if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) + rt2800_bbp_write(rt2x00dev, 75, 0x46); + else + rt2800_bbp_write(rt2x00dev, 75, 0x50); + } + + rt2800_register_read(rt2x00dev, TX_BAND_CFG, ®); + rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); + rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); + rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); + rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg); + + tx_pin = 0; + + /* Turn on unused PA or LNA when not using 1T or 1R */ + if (rt2x00dev->default_ant.tx != 1) { + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); + } + + /* Turn on unused PA or LNA when not using 1T or 1R */ + if (rt2x00dev->default_ant.rx != 1) { + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); + } + + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14); + rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); + + rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); + + rt2800_bbp_read(rt2x00dev, 4, &bbp); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); + rt2800_bbp_write(rt2x00dev, 4, bbp); + + rt2800_bbp_read(rt2x00dev, 3, &bbp); + rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); + rt2800_bbp_write(rt2x00dev, 3, bbp); + + if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { + if (conf_is_ht40(conf)) { + rt2800_bbp_write(rt2x00dev, 69, 0x1a); + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + rt2800_bbp_write(rt2x00dev, 73, 0x16); + } else { + rt2800_bbp_write(rt2x00dev, 69, 0x16); + rt2800_bbp_write(rt2x00dev, 70, 0x08); + rt2800_bbp_write(rt2x00dev, 73, 0x11); + } + } + + msleep(1); +} + +static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, + const int txpower) +{ + u32 reg; + u32 value = TXPOWER_G_TO_DEV(txpower); + u8 r1; + + rt2800_bbp_read(rt2x00dev, 1, &r1); + rt2x00_set_field8(®, BBP1_TX_POWER, 0); + rt2800_bbp_write(rt2x00dev, 1, r1); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, ®); + rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, ®); + rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value); + rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, ®); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value); + rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, ®); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value); + rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg); + + rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, ®); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value); + rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value); + rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg); +} + +static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, TX_RTY_CFG, ®); + rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, + libconf->conf->short_frame_max_tx_count); + rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, + libconf->conf->long_frame_max_tx_count); + rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); + rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); + rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); + rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); + rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg); +} + +static void rt2800_config_ps(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf) +{ + enum dev_state state = + (libconf->conf->flags & IEEE80211_CONF_PS) ? + STATE_SLEEP : STATE_AWAKE; + u32 reg; + + if (state == STATE_SLEEP) { + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); + + rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, + libconf->conf->listen_interval - 1); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); + + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); + } else { + rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); + + rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); + rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); + } +} + +void rt2800_config(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf, + const unsigned int flags) +{ + /* Always recalculate LNA gain before changing configuration */ + rt2800_config_lna_gain(rt2x00dev, libconf); + + if (flags & IEEE80211_CONF_CHANGE_CHANNEL) + rt2800_config_channel(rt2x00dev, libconf->conf, + &libconf->rf, &libconf->channel); + if (flags & IEEE80211_CONF_CHANGE_POWER) + rt2800_config_txpower(rt2x00dev, libconf->conf->power_level); + if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) + rt2800_config_retry_limit(rt2x00dev, libconf); + if (flags & IEEE80211_CONF_CHANGE_PS) + rt2800_config_ps(rt2x00dev, libconf); +} +EXPORT_SYMBOL_GPL(rt2800_config); + +/* + * Link tuning + */ +void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual) +{ + u32 reg; + + /* + * Update FCS error count from register. + */ + rt2800_register_read(rt2x00dev, RX_STA_CNT0, ®); + qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); +} +EXPORT_SYMBOL_GPL(rt2800_link_stats); + +static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev) +{ + if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { + if (rt2x00_intf_is_usb(rt2x00dev) && + rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) + return 0x1c + (2 * rt2x00dev->lna_gain); + else + return 0x2e + rt2x00dev->lna_gain; + } + + if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) + return 0x32 + (rt2x00dev->lna_gain * 5) / 3; + else + return 0x3a + (rt2x00dev->lna_gain * 5) / 3; +} + +static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev, + struct link_qual *qual, u8 vgc_level) +{ + if (qual->vgc_level != vgc_level) { + rt2800_bbp_write(rt2x00dev, 66, vgc_level); + qual->vgc_level = vgc_level; + qual->vgc_level_reg = vgc_level; + } +} + +void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual) +{ + rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev)); +} +EXPORT_SYMBOL_GPL(rt2800_reset_tuner); + +void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, + const u32 count) +{ + if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) + return; + + /* + * When RSSI is better then -80 increase VGC level with 0x10 + */ + rt2800_set_vgc(rt2x00dev, qual, + rt2800_get_default_vgc(rt2x00dev) + + ((qual->rssi > -80) * 0x10)); +} +EXPORT_SYMBOL_GPL(rt2800_link_tuner); + +/* + * Initialization functions. + */ +int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + unsigned int i; + + if (rt2x00_intf_is_usb(rt2x00dev)) { + /* + * Wait untill BBP and RF are ready. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); + if (reg && reg != ~0) + break; + msleep(1); + } + + if (i == REGISTER_BUSY_COUNT) { + ERROR(rt2x00dev, "Unstable hardware.\n"); + return -EBUSY; + } + + rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, + reg & ~0x00002000); + } else if (rt2x00_intf_is_pci(rt2x00dev)) + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); + + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + if (rt2x00_intf_is_usb(rt2x00dev)) { + rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000); +#ifdef CONFIG_RT2800USB + rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, + USB_MODE_RESET, REGISTER_TIMEOUT); +#endif + } + + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); + + rt2800_register_read(rt2x00dev, BCN_OFFSET0, ®); + rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */ + rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */ + rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */ + rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */ + rt2800_register_write(rt2x00dev, BCN_OFFSET0, reg); + + rt2800_register_read(rt2x00dev, BCN_OFFSET1, ®); + rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */ + rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */ + rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */ + rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */ + rt2800_register_write(rt2x00dev, BCN_OFFSET1, reg); + + rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); + rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); + + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); + + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); + rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); + + if (rt2x00_intf_is_usb(rt2x00dev) && + rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); + rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); + } else { + rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); + rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); + } + + rt2800_register_read(rt2x00dev, TX_LINK_CFG, ®); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); + rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0); + rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0); + rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0); + rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0); + rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0); + rt2800_register_write(rt2x00dev, TX_LINK_CFG, reg); + + rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9); + rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10); + rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); + + rt2800_register_read(rt2x00dev, MAX_LEN_CFG, ®); + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); + if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && + rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); + else + rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); + rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); + rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg); + + rt2800_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f); + + rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, ®); + rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1); + rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0); + rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0); + rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0); + rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0); + rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg); + + rt2800_register_read(rt2x00dev, CCK_PROT_CFG, ®); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, MM20_PROT_CFG, ®); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0); + rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, GF20_PROT_CFG, ®); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0); + rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, GF40_PROT_CFG, ®); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0); + rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1); + rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1); + rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg); + + if (rt2x00_intf_is_usb(rt2x00dev)) { + rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006); + + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + } + + rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f); + rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002); + + rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®); + rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, + IEEE80211_MAX_RTS_THRESHOLD); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0); + rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg); + + rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca); + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); + + /* + * ASIC will keep garbage value after boot, clear encryption keys. + */ + for (i = 0; i < 4; i++) + rt2800_register_write(rt2x00dev, + SHARED_KEY_MODE_ENTRY(i), 0); + + for (i = 0; i < 256; i++) { + u32 wcid[2] = { 0xffffffff, 0x00ffffff }; + rt2800_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), + wcid, sizeof(wcid)); + + rt2800_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1); + rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0); + } + + /* + * Clear all beacons + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + rt2800_register_write(rt2x00dev, HW_BEACON_BASE0, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE1, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE2, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE4, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE5, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE6, 0); + rt2800_register_write(rt2x00dev, HW_BEACON_BASE7, 0); + + if (rt2x00_intf_is_usb(rt2x00dev)) { + rt2800_register_read(rt2x00dev, USB_CYC_CFG, ®); + rt2x00_set_field32(®, USB_CYC_CFG_CLOCK_CYCLE, 30); + rt2800_register_write(rt2x00dev, USB_CYC_CFG, reg); + } + + rt2800_register_read(rt2x00dev, HT_FBK_CFG0, ®); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5); + rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6); + rt2800_register_write(rt2x00dev, HT_FBK_CFG0, reg); + + rt2800_register_read(rt2x00dev, HT_FBK_CFG1, ®); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13); + rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14); + rt2800_register_write(rt2x00dev, HT_FBK_CFG1, reg); + + rt2800_register_read(rt2x00dev, LG_FBK_CFG0, ®); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 9); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); + rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); + rt2800_register_write(rt2x00dev, LG_FBK_CFG0, reg); + + rt2800_register_read(rt2x00dev, LG_FBK_CFG1, ®); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1); + rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2); + rt2800_register_write(rt2x00dev, LG_FBK_CFG1, reg); + + /* + * We must clear the error counters. + * These registers are cleared on read, + * so we may pass a useless variable to store the value. + */ + rt2800_register_read(rt2x00dev, RX_STA_CNT0, ®); + rt2800_register_read(rt2x00dev, RX_STA_CNT1, ®); + rt2800_register_read(rt2x00dev, RX_STA_CNT2, ®); + rt2800_register_read(rt2x00dev, TX_STA_CNT0, ®); + rt2800_register_read(rt2x00dev, TX_STA_CNT1, ®); + rt2800_register_read(rt2x00dev, TX_STA_CNT2, ®); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_init_registers); + +static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u32 reg; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, ®); + if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY)) + return 0; + + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n"); + return -EACCES; +} + +static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u8 value; + + /* + * BBP was enabled after firmware was loaded, + * but we need to reactivate it now. + */ + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + msleep(1); + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_bbp_read(rt2x00dev, 0, &value); + if ((value != 0xff) && (value != 0x00)) + return 0; + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); + return -EACCES; +} + +int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev) || + rt2800_wait_bbp_ready(rt2x00dev))) + return -EACCES; + + rt2800_bbp_write(rt2x00dev, 65, 0x2c); + rt2800_bbp_write(rt2x00dev, 66, 0x38); + rt2800_bbp_write(rt2x00dev, 69, 0x12); + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + rt2800_bbp_write(rt2x00dev, 73, 0x10); + rt2800_bbp_write(rt2x00dev, 81, 0x37); + rt2800_bbp_write(rt2x00dev, 82, 0x62); + rt2800_bbp_write(rt2x00dev, 83, 0x6a); + rt2800_bbp_write(rt2x00dev, 84, 0x99); + rt2800_bbp_write(rt2x00dev, 86, 0x00); + rt2800_bbp_write(rt2x00dev, 91, 0x04); + rt2800_bbp_write(rt2x00dev, 92, 0x00); + rt2800_bbp_write(rt2x00dev, 103, 0x00); + rt2800_bbp_write(rt2x00dev, 105, 0x05); + + if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { + rt2800_bbp_write(rt2x00dev, 69, 0x16); + rt2800_bbp_write(rt2x00dev, 73, 0x12); + } + + if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) + rt2800_bbp_write(rt2x00dev, 84, 0x19); + + if (rt2x00_intf_is_usb(rt2x00dev) && + rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { + rt2800_bbp_write(rt2x00dev, 70, 0x0a); + rt2800_bbp_write(rt2x00dev, 84, 0x99); + rt2800_bbp_write(rt2x00dev, 105, 0x05); + } + + if (rt2x00_intf_is_pci(rt2x00dev) && + rt2x00_rt(&rt2x00dev->chip, RT3052)) { + rt2800_bbp_write(rt2x00dev, 31, 0x08); + rt2800_bbp_write(rt2x00dev, 78, 0x0e); + rt2800_bbp_write(rt2x00dev, 80, 0x08); + } + + for (i = 0; i < EEPROM_BBP_SIZE; i++) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); + + if (eeprom != 0xffff && eeprom != 0x0000) { + reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); + value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); + rt2800_bbp_write(rt2x00dev, reg_id, value); + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_init_bbp); + +static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, + bool bw40, u8 rfcsr24, u8 filter_target) +{ + unsigned int i; + u8 bbp; + u8 rfcsr; + u8 passband; + u8 stopband; + u8 overtuned = 0; + + rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); + + rt2800_bbp_read(rt2x00dev, 4, &bbp); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); + rt2800_bbp_write(rt2x00dev, 4, bbp); + + rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); + rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); + + /* + * Set power & frequency of passband test tone + */ + rt2800_bbp_write(rt2x00dev, 24, 0); + + for (i = 0; i < 100; i++) { + rt2800_bbp_write(rt2x00dev, 25, 0x90); + msleep(1); + + rt2800_bbp_read(rt2x00dev, 55, &passband); + if (passband) + break; + } + + /* + * Set power & frequency of stopband test tone + */ + rt2800_bbp_write(rt2x00dev, 24, 0x06); + + for (i = 0; i < 100; i++) { + rt2800_bbp_write(rt2x00dev, 25, 0x90); + msleep(1); + + rt2800_bbp_read(rt2x00dev, 55, &stopband); + + if ((passband - stopband) <= filter_target) { + rfcsr24++; + overtuned += ((passband - stopband) == filter_target); + } else + break; + + rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); + } + + rfcsr24 -= !!overtuned; + + rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24); + return rfcsr24; +} + +int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) +{ + u8 rfcsr; + u8 bbp; + + if (rt2x00_intf_is_usb(rt2x00dev) && + rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) + return 0; + + if (rt2x00_intf_is_pci(rt2x00dev)) { + if (!rt2x00_rf(&rt2x00dev->chip, RF3020) && + !rt2x00_rf(&rt2x00dev->chip, RF3021) && + !rt2x00_rf(&rt2x00dev->chip, RF3022)) + return 0; + } + + /* + * Init RF calibration. + */ + rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); + rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); + msleep(1); + rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); + rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); + + if (rt2x00_intf_is_usb(rt2x00dev)) { + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x03); + rt2800_rfcsr_write(rt2x00dev, 6, 0x02); + rt2800_rfcsr_write(rt2x00dev, 7, 0x70); + rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 10, 0x71); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x7b); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x58); + rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 17, 0x92); + rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0xba); + rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 24, 0x16); + rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + rt2800_rfcsr_write(rt2x00dev, 27, 0x03); + rt2800_rfcsr_write(rt2x00dev, 29, 0x1f); + } else if (rt2x00_intf_is_pci(rt2x00dev)) { + rt2800_rfcsr_write(rt2x00dev, 0, 0x50); + rt2800_rfcsr_write(rt2x00dev, 1, 0x01); + rt2800_rfcsr_write(rt2x00dev, 2, 0xf7); + rt2800_rfcsr_write(rt2x00dev, 3, 0x75); + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x03); + rt2800_rfcsr_write(rt2x00dev, 6, 0x02); + rt2800_rfcsr_write(rt2x00dev, 7, 0x50); + rt2800_rfcsr_write(rt2x00dev, 8, 0x39); + rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 10, 0x60); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x75); + rt2800_rfcsr_write(rt2x00dev, 13, 0x75); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x58); + rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 17, 0x92); + rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0xba); + rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x31); + rt2800_rfcsr_write(rt2x00dev, 24, 0x08); + rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + rt2800_rfcsr_write(rt2x00dev, 26, 0x25); + rt2800_rfcsr_write(rt2x00dev, 27, 0x23); + rt2800_rfcsr_write(rt2x00dev, 28, 0x13); + rt2800_rfcsr_write(rt2x00dev, 29, 0x83); + } + + /* + * Set RX Filter calibration for 20MHz and 40MHz + */ + rt2x00dev->calibration[0] = + rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x16); + rt2x00dev->calibration[1] = + rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x19); + + /* + * Set back to initial state + */ + rt2800_bbp_write(rt2x00dev, 24, 0); + + rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); + rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); + + /* + * set BBP back to BW20 + */ + rt2800_bbp_read(rt2x00dev, 4, &bbp); + rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); + rt2800_bbp_write(rt2x00dev, 4, bbp); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_init_rfcsr); + +/* + * IEEE80211 stack callback functions. + */ +static void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, + u32 *iv32, u16 *iv16) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct mac_iveiv_entry iveiv_entry; + u32 offset; + + offset = MAC_IVEIV_ENTRY(hw_key_idx); + rt2800_register_multiread(rt2x00dev, offset, + &iveiv_entry, sizeof(iveiv_entry)); + + memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16)); + memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32)); +} + +static int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u32 reg; + bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); + + rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®); + rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); + rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg); + + rt2800_register_read(rt2x00dev, CCK_PROT_CFG, ®); + rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, ®); + rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, MM20_PROT_CFG, ®); + rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, MM40_PROT_CFG, ®); + rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, GF20_PROT_CFG, ®); + rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg); + + rt2800_register_read(rt2x00dev, GF40_PROT_CFG, ®); + rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); + rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg); + + return 0; +} + +static int rt2800_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, + const struct ieee80211_tx_queue_params *params) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + struct data_queue *queue; + struct rt2x00_field32 field; + int retval; + u32 reg; + u32 offset; + + /* + * First pass the configuration through rt2x00lib, that will + * update the queue settings and validate the input. After that + * we are free to update the registers based on the value + * in the queue parameter. + */ + retval = rt2x00mac_conf_tx(hw, queue_idx, params); + if (retval) + return retval; + + /* + * We only need to perform additional register initialization + * for WMM queues/ + */ + if (queue_idx >= 4) + return 0; + + queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); + + /* Update WMM TXOP register */ + offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); + field.bit_offset = (queue_idx & 1) * 16; + field.bit_mask = 0xffff << field.bit_offset; + + rt2800_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, field, queue->txop); + rt2800_register_write(rt2x00dev, offset, reg); + + /* Update WMM registers */ + field.bit_offset = queue_idx * 4; + field.bit_mask = 0xf << field.bit_offset; + + rt2800_register_read(rt2x00dev, WMM_AIFSN_CFG, ®); + rt2x00_set_field32(®, field, queue->aifs); + rt2800_register_write(rt2x00dev, WMM_AIFSN_CFG, reg); + + rt2800_register_read(rt2x00dev, WMM_CWMIN_CFG, ®); + rt2x00_set_field32(®, field, queue->cw_min); + rt2800_register_write(rt2x00dev, WMM_CWMIN_CFG, reg); + + rt2800_register_read(rt2x00dev, WMM_CWMAX_CFG, ®); + rt2x00_set_field32(®, field, queue->cw_max); + rt2800_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); + + /* Update EDCA registers */ + offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); + + rt2800_register_read(rt2x00dev, offset, ®); + rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); + rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); + rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); + rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); + rt2800_register_write(rt2x00dev, offset, reg); + + return 0; +} + +static u64 rt2800_get_tsf(struct ieee80211_hw *hw) +{ + struct rt2x00_dev *rt2x00dev = hw->priv; + u64 tsf; + u32 reg; + + rt2800_register_read(rt2x00dev, TSF_TIMER_DW1, ®); + tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32; + rt2800_register_read(rt2x00dev, TSF_TIMER_DW0, ®); + tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD); + + return tsf; +} + +const struct ieee80211_ops rt2800_mac80211_ops = { + .tx = rt2x00mac_tx, + .start = rt2x00mac_start, + .stop = rt2x00mac_stop, + .add_interface = rt2x00mac_add_interface, + .remove_interface = rt2x00mac_remove_interface, + .config = rt2x00mac_config, + .configure_filter = rt2x00mac_configure_filter, + .set_tim = rt2x00mac_set_tim, + .set_key = rt2x00mac_set_key, + .get_stats = rt2x00mac_get_stats, + .get_tkip_seq = rt2800_get_tkip_seq, + .set_rts_threshold = rt2800_set_rts_threshold, + .bss_info_changed = rt2x00mac_bss_info_changed, + .conf_tx = rt2800_conf_tx, + .get_tx_stats = rt2x00mac_get_tx_stats, + .get_tsf = rt2800_get_tsf, + .rfkill_poll = rt2x00mac_rfkill_poll, +}; +EXPORT_SYMBOL_GPL(rt2800_mac80211_ops); diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h new file mode 100644 index 000000000000..5eea8fcba6cc --- /dev/null +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -0,0 +1,134 @@ +/* + Copyright (C) 2009 Bartlomiej Zolnierkiewicz + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the + Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef RT2800LIB_H +#define RT2800LIB_H + +struct rt2800_ops { + void (*register_read)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, u32 *value); + void (*register_write)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, u32 value); + void (*register_write_lock)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, u32 value); + + void (*register_multiread)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + void *value, const u32 length); + void (*register_multiwrite)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const void *value, const u32 length); + + int (*regbusy_read)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const struct rt2x00_field32 field, u32 *reg); +}; + +static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 *value) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + rt2800ops->register_read(rt2x00dev, offset, value); +} + +static inline void rt2800_register_write(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 value) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + rt2800ops->register_write(rt2x00dev, offset, value); +} + +static inline void rt2800_register_write_lock(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 value) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + rt2800ops->register_write_lock(rt2x00dev, offset, value); +} + +static inline void rt2800_register_multiread(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + void *value, const u32 length) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + rt2800ops->register_multiread(rt2x00dev, offset, value, length); +} + +static inline void rt2800_register_multiwrite(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const void *value, + const u32 length) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + rt2800ops->register_multiwrite(rt2x00dev, offset, value, length); +} + +static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const struct rt2x00_field32 field, + u32 *reg) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->priv; + + return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg); +} + +void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, + const u8 command, const u8 token, + const u8 arg0, const u8 arg1); + +extern const struct rt2x00debug rt2800_rt2x00debug; + +int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev); +void rt2800_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, enum led_type type); +int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); +int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_crypto *crypto, + struct ieee80211_key_conf *key); +void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, + const unsigned int filter_flags); +void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, const unsigned int flags); +void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp); +void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant); +void rt2800_config(struct rt2x00_dev *rt2x00dev, + struct rt2x00lib_conf *libconf, + const unsigned int flags); +void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual); +void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual); +void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, + const u32 count); + +int rt2800_init_registers(struct rt2x00_dev *rt2x00dev); +int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev); +int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev); + +extern const struct ieee80211_ops rt2800_mac80211_ops; + +#endif /* RT2800LIB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index be81788b80c7..3c5b875cdee8 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -37,6 +37,8 @@ #include "rt2x00.h" #include "rt2x00pci.h" #include "rt2x00soc.h" +#include "rt2800lib.h" +#include "rt2800.h" #include "rt2800pci.h" #ifdef CONFIG_RT2800PCI_PCI_MODULE @@ -54,205 +56,13 @@ static int modparam_nohwcrypt = 1; module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); -/* - * Register access. - * BBP and RF register require indirect register access, - * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - */ -#define WAIT_FOR_BBP(__dev, __reg) \ - rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) -#define WAIT_FOR_RFCSR(__dev, __reg) \ - rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) -#define WAIT_FOR_RF(__dev, __reg) \ - rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) -#define WAIT_FOR_MCU(__dev, __reg) \ - rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \ - H2M_MAILBOX_CSR_OWNER, (__reg)) - -static void rt2800pci_bbp_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value); - rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); - rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0); - rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); - - rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800pci_bbp_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); - rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1); - rt2x00_set_field32(®, BBP_CSR_CFG_BBP_RW_MODE, 1); - - rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg); - - WAIT_FOR_BBP(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RFCSR becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); - rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); - rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - - rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RFCSR becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); - rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - - rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg); - - WAIT_FOR_RFCSR(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RF becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RF(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value); - rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0); - rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0); - rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1); - - rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG0, reg); - rt2x00_rf_write(rt2x00dev, word, value); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800pci_mcu_request(struct rt2x00_dev *rt2x00dev, - const u8 command, const u8 token, - const u8 arg0, const u8 arg1) -{ - u32 reg; - - /* - * RT2880 and RT3052 don't support MCU requests. - */ - if (rt2x00_rt(&rt2x00dev->chip, RT2880) || - rt2x00_rt(&rt2x00dev->chip, RT3052)) - return; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the MCU becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_MCU(rt2x00dev, ®)) { - rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); - rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg); - - reg = 0; - rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); - rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) { unsigned int i; u32 reg; for (i = 0; i < 200; i++) { - rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CID, ®); + rt2800_register_read(rt2x00dev, H2M_MAILBOX_CID, ®); if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) || (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) || @@ -266,8 +76,8 @@ static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) if (i == 200) ERROR(rt2x00dev, "MCU request failed, no response from hardware\n"); - rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); - rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); } #ifdef CONFIG_RT2800PCI_WISOC @@ -289,7 +99,7 @@ static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom) struct rt2x00_dev *rt2x00dev = eeprom->data; u32 reg; - rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); + rt2800_register_read(rt2x00dev, E2PROM_CSR, ®); eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN); eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT); @@ -311,7 +121,7 @@ static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom) rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT, !!eeprom->reg_chip_select); - rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg); + rt2800_register_write(rt2x00dev, E2PROM_CSR, reg); } static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) @@ -319,7 +129,7 @@ static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) struct eeprom_93cx6 eeprom; u32 reg; - rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); + rt2800_register_read(rt2x00dev, E2PROM_CSR, ®); eeprom.data = rt2x00dev; eeprom.register_read = rt2800pci_eepromregister_read; @@ -340,23 +150,23 @@ static void rt2800pci_efuse_read(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt2x00pci_register_read(rt2x00dev, EFUSE_CTRL, ®); + rt2800_register_read(rt2x00dev, EFUSE_CTRL, ®); rt2x00_set_field32(®, EFUSE_CTRL_ADDRESS_IN, i); rt2x00_set_field32(®, EFUSE_CTRL_MODE, 0); rt2x00_set_field32(®, EFUSE_CTRL_KICK, 1); - rt2x00pci_register_write(rt2x00dev, EFUSE_CTRL, reg); + rt2800_register_write(rt2x00dev, EFUSE_CTRL, reg); /* Wait until the EEPROM has been loaded */ - rt2x00pci_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, ®); + rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, ®); /* Apparently the data is read from end to start */ - rt2x00pci_register_read(rt2x00dev, EFUSE_DATA3, + rt2800_register_read(rt2x00dev, EFUSE_DATA3, (u32 *)&rt2x00dev->eeprom[i]); - rt2x00pci_register_read(rt2x00dev, EFUSE_DATA2, + rt2800_register_read(rt2x00dev, EFUSE_DATA2, (u32 *)&rt2x00dev->eeprom[i + 2]); - rt2x00pci_register_read(rt2x00dev, EFUSE_DATA1, + rt2800_register_read(rt2x00dev, EFUSE_DATA1, (u32 *)&rt2x00dev->eeprom[i + 4]); - rt2x00pci_register_read(rt2x00dev, EFUSE_DATA0, + rt2800_register_read(rt2x00dev, EFUSE_DATA0, (u32 *)&rt2x00dev->eeprom[i + 6]); } @@ -377,829 +187,6 @@ static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) } #endif /* CONFIG_RT2800PCI_PCI */ -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -static const struct rt2x00debug rt2800pci_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2x00pci_register_read, - .write = rt2x00pci_register_write, - .flags = RT2X00DEBUGFS_OFFSET, - .word_base = CSR_REG_BASE, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_base = EEPROM_BASE, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2800pci_bbp_read, - .write = rt2800pci_bbp_write, - .word_base = BBP_BASE, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2800pci_rf_write, - .word_base = RF_BASE, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -static int rt2800pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); - return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); -} - -#ifdef CONFIG_RT2X00_LIB_LEDS -static void rt2800pci_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - unsigned int enabled = brightness != LED_OFF; - unsigned int bg_mode = - (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); - unsigned int polarity = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_POLARITY); - unsigned int ledmode = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_MODE); - - if (led->type == LED_TYPE_RADIO) { - rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? 0x20 : 0); - } else if (led->type == LED_TYPE_ASSOC) { - rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); - } else if (led->type == LED_TYPE_QUALITY) { - /* - * The brightness is divided into 6 levels (0 - 5), - * The specs tell us the following levels: - * 0, 1 ,3, 7, 15, 31 - * to determine the level in a simple way we can simply - * work with bitshifting: - * (1 << level) - 1 - */ - rt2800pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, - (1 << brightness / (LED_FULL / 6)) - 1, - polarity); - } -} - -static int rt2800pci_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, - unsigned long *delay_off) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - u32 reg; - - rt2x00pci_register_read(led->rt2x00dev, LED_CFG, ®); - rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on); - rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); - rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); - rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); - rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); - rt2x00pci_register_write(led->rt2x00dev, LED_CFG, reg); - - return 0; -} - -static void rt2800pci_init_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, - enum led_type type) -{ - led->rt2x00dev = rt2x00dev; - led->type = type; - led->led_dev.brightness_set = rt2800pci_brightness_set; - led->led_dev.blink_set = rt2800pci_blink_set; - led->flags = LED_INITIALIZED; -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -/* - * Configuration handlers. - */ -static void rt2800pci_config_wcid_attr(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct mac_wcid_entry wcid_entry; - struct mac_iveiv_entry iveiv_entry; - u32 offset; - u32 reg; - - offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); - - rt2x00pci_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, - !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, - (crypto->cmd == SET_KEY) * crypto->cipher); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, - (crypto->cmd == SET_KEY) * crypto->bssidx); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); - rt2x00pci_register_write(rt2x00dev, offset, reg); - - offset = MAC_IVEIV_ENTRY(key->hw_key_idx); - - memset(&iveiv_entry, 0, sizeof(iveiv_entry)); - if ((crypto->cipher == CIPHER_TKIP) || - (crypto->cipher == CIPHER_TKIP_NO_MIC) || - (crypto->cipher == CIPHER_AES)) - iveiv_entry.iv[3] |= 0x20; - iveiv_entry.iv[3] |= key->keyidx << 6; - rt2x00pci_register_multiwrite(rt2x00dev, offset, - &iveiv_entry, sizeof(iveiv_entry)); - - offset = MAC_WCID_ENTRY(key->hw_key_idx); - - memset(&wcid_entry, 0, sizeof(wcid_entry)); - if (crypto->cmd == SET_KEY) - memcpy(&wcid_entry, crypto->address, ETH_ALEN); - rt2x00pci_register_multiwrite(rt2x00dev, offset, - &wcid_entry, sizeof(wcid_entry)); -} - -static int rt2800pci_config_shared_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - struct rt2x00_field32 field; - u32 offset; - u32 reg; - - if (crypto->cmd == SET_KEY) { - key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = SHARED_KEY_ENTRY(key->hw_key_idx); - rt2x00pci_register_multiwrite(rt2x00dev, offset, - &key_entry, sizeof(key_entry)); - } - - /* - * The cipher types are stored over multiple registers - * starting with SHARED_KEY_MODE_BASE each word will have - * 32 bits and contains the cipher types for 2 bssidx each. - * Using the correct defines correctly will cause overhead, - * so just calculate the correct offset. - */ - field.bit_offset = 4 * (key->hw_key_idx % 8); - field.bit_mask = 0x7 << field.bit_offset; - - offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); - - rt2x00pci_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, - (crypto->cmd == SET_KEY) * crypto->cipher); - rt2x00pci_register_write(rt2x00dev, offset, reg); - - /* - * Update WCID information - */ - rt2800pci_config_wcid_attr(rt2x00dev, crypto, key); - - return 0; -} - -static int rt2800pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - u32 offset; - - if (crypto->cmd == SET_KEY) { - /* - * 1 pairwise key is possible per AID, this means that the AID - * equals our hw_key_idx. Make sure the WCID starts _after_ the - * last possible shared key entry. - */ - if (crypto->aid > (256 - 32)) - return -ENOSPC; - - key->hw_key_idx = 32 + crypto->aid; - - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); - rt2x00pci_register_multiwrite(rt2x00dev, offset, - &key_entry, sizeof(key_entry)); - } - - /* - * Update WCID information - */ - rt2800pci_config_wcid_attr(rt2x00dev, crypto, key); - - return 0; -} - -static void rt2800pci_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags) -{ - u32 reg; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2x00pci_register_read(rt2x00dev, RX_FILTER_CFG, ®); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, - !(filter_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, - !(filter_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, - !(filter_flags & FIF_PSPOLL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, - !(filter_flags & FIF_CONTROL)); - rt2x00pci_register_write(rt2x00dev, RX_FILTER_CFG, reg); -} - -static void rt2800pci_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, - const unsigned int flags) -{ - unsigned int beacon_base; - u32 reg; - - if (flags & CONFIG_UPDATE_TYPE) { - /* - * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); - rt2x00pci_register_write(rt2x00dev, beacon_base, 0); - - /* - * Enable synchronisation. - */ - rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); - rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } - - if (flags & CONFIG_UPDATE_MAC) { - reg = le32_to_cpu(conf->mac[1]); - rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); - conf->mac[1] = cpu_to_le32(reg); - - rt2x00pci_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, - conf->mac, sizeof(conf->mac)); - } - - if (flags & CONFIG_UPDATE_BSSID) { - reg = le32_to_cpu(conf->bssid[1]); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); - conf->bssid[1] = cpu_to_le32(reg); - - rt2x00pci_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, - conf->bssid, sizeof(conf->bssid)); - } -} - -static void rt2800pci_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20); - rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, ®); - rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, - !!erp->short_preamble); - rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, - !!erp->short_preamble); - rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, - erp->cts_protection ? 2 : 0); - rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE, - erp->basic_rates); - rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); - - rt2x00pci_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); - rt2x00pci_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, XIFS_TIME_CFG, ®); - rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); - rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); - rt2x00pci_register_write(rt2x00dev, XIFS_TIME_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); -} - -static void rt2800pci_config_ant(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u8 r1; - u8 r3; - - rt2800pci_bbp_read(rt2x00dev, 1, &r1); - rt2800pci_bbp_read(rt2x00dev, 3, &r3); - - /* - * Configure the TX antenna. - */ - switch ((int)ant->tx) { - case 1: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); - break; - case 2: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); - break; - case 3: - /* Do nothing */ - break; - } - - /* - * Configure the RX antenna. - */ - switch ((int)ant->rx) { - case 1: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); - break; - case 2: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); - break; - case 3: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); - break; - } - - rt2800pci_bbp_write(rt2x00dev, 3, r3); - rt2800pci_bbp_write(rt2x00dev, 1, r1); -} - -static void rt2800pci_config_lna_gain(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u16 eeprom; - short lna_gain; - - if (libconf->rf.channel <= 14) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); - } else if (libconf->rf.channel <= 64) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); - } else if (libconf->rf.channel <= 128) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1); - } else { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2); - } - - rt2x00dev->lna_gain = lna_gain; -} - -static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - if (rt2x00dev->default_ant.tx == 1) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); - - if (rt2x00dev->default_ant.rx == 1) { - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - } else if (rt2x00dev->default_ant.rx == 2) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - - if (rf->channel > 14) { - /* - * When TX power is below 0, we should increase it by 7 to - * make it a positive value (Minumum value is -7). - * However this means that values between 0 and 7 have - * double meaning, and we should set a 7DBm boost flag. - */ - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, - (info->tx_power1 >= 0)); - - if (info->tx_power1 < 0) - info->tx_power1 += 7; - - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power1)); - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, - (info->tx_power2 >= 0)); - - if (info->tx_power2 < 0) - info->tx_power2 += 7; - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power2)); - } else { - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power2)); - } - - rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); - - rt2800pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2800pci_rf_write(rt2x00dev, 2, rf->rf2); - rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800pci_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2800pci_rf_write(rt2x00dev, 2, rf->rf2); - rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); - rt2800pci_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2800pci_rf_write(rt2x00dev, 2, rf->rf2); - rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800pci_rf_write(rt2x00dev, 4, rf->rf4); -} - -static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u8 rfcsr; - - rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1); - rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3); - - rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); - rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr); - - rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr); - - rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); - rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr); - - rt2800pci_rfcsr_write(rt2x00dev, 24, - rt2x00dev->calibration[conf_is_ht40(conf)]); - - rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); - rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr); -} - -static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u32 reg; - unsigned int tx_pin; - u8 bbp; - - if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) - rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info); - else - rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info); - - /* - * Change BBP settings - */ - rt2800pci_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); - rt2800pci_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); - rt2800pci_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); - rt2800pci_bbp_write(rt2x00dev, 86, 0); - - if (rf->channel <= 14) { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { - rt2800pci_bbp_write(rt2x00dev, 82, 0x62); - rt2800pci_bbp_write(rt2x00dev, 75, 0x46); - } else { - rt2800pci_bbp_write(rt2x00dev, 82, 0x84); - rt2800pci_bbp_write(rt2x00dev, 75, 0x50); - } - } else { - rt2800pci_bbp_write(rt2x00dev, 82, 0xf2); - - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) - rt2800pci_bbp_write(rt2x00dev, 75, 0x46); - else - rt2800pci_bbp_write(rt2x00dev, 75, 0x50); - } - - rt2x00pci_register_read(rt2x00dev, TX_BAND_CFG, ®); - rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); - rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); - rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); - rt2x00pci_register_write(rt2x00dev, TX_BAND_CFG, reg); - - tx_pin = 0; - - /* Turn on unused PA or LNA when not using 1T or 1R */ - if (rt2x00dev->default_ant.tx != 1) { - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); - } - - /* Turn on unused PA or LNA when not using 1T or 1R */ - if (rt2x00dev->default_ant.rx != 1) { - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); - } - - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); - - rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - - rt2800pci_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); - rt2800pci_bbp_write(rt2x00dev, 4, bbp); - - rt2800pci_bbp_read(rt2x00dev, 3, &bbp); - rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); - rt2800pci_bbp_write(rt2x00dev, 3, bbp); - - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { - if (conf_is_ht40(conf)) { - rt2800pci_bbp_write(rt2x00dev, 69, 0x1a); - rt2800pci_bbp_write(rt2x00dev, 70, 0x0a); - rt2800pci_bbp_write(rt2x00dev, 73, 0x16); - } else { - rt2800pci_bbp_write(rt2x00dev, 69, 0x16); - rt2800pci_bbp_write(rt2x00dev, 70, 0x08); - rt2800pci_bbp_write(rt2x00dev, 73, 0x11); - } - } - - msleep(1); -} - -static void rt2800pci_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - u32 reg; - u32 value = TXPOWER_G_TO_DEV(txpower); - u8 r1; - - rt2800pci_bbp_read(rt2x00dev, 1, &r1); - rt2x00_set_field8(®, BBP1_TX_POWER, 0); - rt2800pci_bbp_write(rt2x00dev, 1, r1); - - rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_0, ®); - rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value); - rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_0, reg); - - rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_1, ®); - rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value); - rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_1, reg); - - rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_2, ®); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value); - rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_2, reg); - - rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_3, ®); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value); - rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_3, reg); - - rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_4, ®); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value); - rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_4, reg); -} - -static void rt2800pci_config_retry_limit(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, TX_RTY_CFG, ®); - rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, - libconf->conf->short_frame_max_tx_count); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, - libconf->conf->long_frame_max_tx_count); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); - rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); - rt2x00pci_register_write(rt2x00dev, TX_RTY_CFG, reg); -} - -static void rt2800pci_config_ps(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - enum dev_state state = - (libconf->conf->flags & IEEE80211_CONF_PS) ? - STATE_SLEEP : STATE_AWAKE; - u32 reg; - - if (state == STATE_SLEEP) { - rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); - - rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, - libconf->conf->listen_interval - 1); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); - rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - } else { - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - - rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); - rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - } -} - -static void rt2800pci_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -{ - /* Always recalculate LNA gain before changing configuration */ - rt2800pci_config_lna_gain(rt2x00dev, libconf); - - if (flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt2800pci_config_channel(rt2x00dev, libconf->conf, - &libconf->rf, &libconf->channel); - if (flags & IEEE80211_CONF_CHANGE_POWER) - rt2800pci_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) - rt2800pci_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_PS) - rt2800pci_config_ps(rt2x00dev, libconf); -} - -/* - * Link tuning - */ -static void rt2800pci_link_stats(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, ®); - qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); -} - -static u8 rt2800pci_get_default_vgc(struct rt2x00_dev *rt2x00dev) -{ - if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) - return 0x2e + rt2x00dev->lna_gain; - - if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) - return 0x32 + (rt2x00dev->lna_gain * 5) / 3; - else - return 0x3a + (rt2x00dev->lna_gain * 5) / 3; -} - -static inline void rt2800pci_set_vgc(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, u8 vgc_level) -{ - if (qual->vgc_level != vgc_level) { - rt2800pci_bbp_write(rt2x00dev, 66, vgc_level); - qual->vgc_level = vgc_level; - qual->vgc_level_reg = vgc_level; - } -} - -static void rt2800pci_reset_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - rt2800pci_set_vgc(rt2x00dev, qual, - rt2800pci_get_default_vgc(rt2x00dev)); -} - -static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count) -{ - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) - return; - - /* - * When RSSI is better then -80 increase VGC level with 0x10 - */ - rt2800pci_set_vgc(rt2x00dev, qual, - rt2800pci_get_default_vgc(rt2x00dev) + - ((qual->rssi > -80) * 0x10)); -} - /* * Firmware functions */ @@ -1257,7 +244,7 @@ static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev, * Wait for stable hardware. */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); if (reg && reg != ~0) break; msleep(1); @@ -1268,42 +255,42 @@ static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev, return -EBUSY; } - rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002); - rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000); + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002); + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000); /* * Disable DMA, will be reenabled later when enabling * the radio. */ - rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); - rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); /* * enable Host program ram write selection */ reg = 0; rt2x00_set_field32(®, PBF_SYS_CTRL_HOST_RAM_WRITE, 1); - rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, reg); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg); /* * Write firmware to device. */ - rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, + rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, data, len); - rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000); - rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001); /* * Wait for device to stabilize. */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, PBF_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®); if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY)) break; msleep(1); @@ -1322,8 +309,8 @@ static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev, /* * Initialize BBP R/W access agent */ - rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); return 0; } @@ -1373,7 +360,7 @@ static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev) struct queue_entry_priv_pci *entry_priv; u32 reg; - rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, ®); + rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®); rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1); rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1); rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1); @@ -1381,539 +368,54 @@ static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1); rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1); rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1); - rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg); + rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg); - rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); - rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); /* * Initialize registers. */ entry_priv = rt2x00dev->tx[0].entries[0].priv_data; - rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma); - rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit); - rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX0, 0); - rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX0, 0); + rt2800_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit); + rt2800_register_write(rt2x00dev, TX_CTX_IDX0, 0); + rt2800_register_write(rt2x00dev, TX_DTX_IDX0, 0); entry_priv = rt2x00dev->tx[1].entries[0].priv_data; - rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma); - rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit); - rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX1, 0); - rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX1, 0); + rt2800_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit); + rt2800_register_write(rt2x00dev, TX_CTX_IDX1, 0); + rt2800_register_write(rt2x00dev, TX_DTX_IDX1, 0); entry_priv = rt2x00dev->tx[2].entries[0].priv_data; - rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma); - rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit); - rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX2, 0); - rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX2, 0); + rt2800_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit); + rt2800_register_write(rt2x00dev, TX_CTX_IDX2, 0); + rt2800_register_write(rt2x00dev, TX_DTX_IDX2, 0); entry_priv = rt2x00dev->tx[3].entries[0].priv_data; - rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma); - rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit); - rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX3, 0); - rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX3, 0); + rt2800_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit); + rt2800_register_write(rt2x00dev, TX_CTX_IDX3, 0); + rt2800_register_write(rt2x00dev, TX_DTX_IDX3, 0); entry_priv = rt2x00dev->rx->entries[0].priv_data; - rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma); - rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit); - rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1); - rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0); + rt2800_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma); + rt2800_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit); + rt2800_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1); + rt2800_register_write(rt2x00dev, RX_DRX_IDX, 0); /* * Enable global DMA configuration */ - rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); - rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - - rt2x00pci_register_write(rt2x00dev, DELAY_INT_CFG, 0); - - return 0; -} - -static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); - - rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); - rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); - - rt2x00pci_register_read(rt2x00dev, BCN_OFFSET0, ®); - rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */ - rt2x00pci_register_write(rt2x00dev, BCN_OFFSET0, reg); - - rt2x00pci_register_read(rt2x00dev, BCN_OFFSET1, ®); - rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */ - rt2x00pci_register_write(rt2x00dev, BCN_OFFSET1, reg); - - rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); - rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); - - rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); - - rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); - rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - rt2x00pci_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); - rt2x00pci_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); - - rt2x00pci_register_read(rt2x00dev, TX_LINK_CFG, ®); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); - rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0); - rt2x00pci_register_write(rt2x00dev, TX_LINK_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10); - rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, MAX_LEN_CFG, ®); - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); - if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && - rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); - else - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); - rt2x00pci_register_write(rt2x00dev, MAX_LEN_CFG, reg); - - rt2x00pci_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f); - - rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, ®); - rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1); - rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0); - rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, ®); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, ®); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0); - rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, ®); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, ®); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0); - rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, ®); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg); - - rt2x00pci_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f); - rt2x00pci_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002); - - rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, ®); - rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, - IEEE80211_MAX_RTS_THRESHOLD); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0); - rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg); - - rt2x00pci_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca); - rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); - - /* - * ASIC will keep garbage value after boot, clear encryption keys. - */ - for (i = 0; i < 4; i++) - rt2x00pci_register_write(rt2x00dev, - SHARED_KEY_MODE_ENTRY(i), 0); - - for (i = 0; i < 256; i++) { - u32 wcid[2] = { 0xffffffff, 0x00ffffff }; - rt2x00pci_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), - wcid, sizeof(wcid)); - - rt2x00pci_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1); - rt2x00pci_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0); - } - - /* - * Clear all beacons - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE4, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE5, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE6, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE7, 0); - - rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG0, ®); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6); - rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG0, reg); - - rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG1, ®); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14); - rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG1, reg); - - rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG0, ®); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 9); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); - rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG0, reg); - - rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG1, ®); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2); - rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG1, reg); - - /* - * We must clear the error counters. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, ®); - rt2x00pci_register_read(rt2x00dev, RX_STA_CNT1, ®); - rt2x00pci_register_read(rt2x00dev, RX_STA_CNT2, ®); - rt2x00pci_register_read(rt2x00dev, TX_STA_CNT0, ®); - rt2x00pci_register_read(rt2x00dev, TX_STA_CNT1, ®); - rt2x00pci_register_read(rt2x00dev, TX_STA_CNT2, ®); - - return 0; -} - -static int rt2800pci_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u32 reg; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, MAC_STATUS_CFG, ®); - if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY)) - return 0; - - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n"); - return -EACCES; -} - -static int rt2800pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u8 value; - - /* - * BBP was enabled after firmware was loaded, - * but we need to reactivate it now. - */ - rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - msleep(1); - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800pci_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - return 0; - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); - return -EACCES; -} - -static int rt2800pci_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - if (unlikely(rt2800pci_wait_bbp_rf_ready(rt2x00dev) || - rt2800pci_wait_bbp_ready(rt2x00dev))) - return -EACCES; - - rt2800pci_bbp_write(rt2x00dev, 65, 0x2c); - rt2800pci_bbp_write(rt2x00dev, 66, 0x38); - rt2800pci_bbp_write(rt2x00dev, 69, 0x12); - rt2800pci_bbp_write(rt2x00dev, 70, 0x0a); - rt2800pci_bbp_write(rt2x00dev, 73, 0x10); - rt2800pci_bbp_write(rt2x00dev, 81, 0x37); - rt2800pci_bbp_write(rt2x00dev, 82, 0x62); - rt2800pci_bbp_write(rt2x00dev, 83, 0x6a); - rt2800pci_bbp_write(rt2x00dev, 84, 0x99); - rt2800pci_bbp_write(rt2x00dev, 86, 0x00); - rt2800pci_bbp_write(rt2x00dev, 91, 0x04); - rt2800pci_bbp_write(rt2x00dev, 92, 0x00); - rt2800pci_bbp_write(rt2x00dev, 103, 0x00); - rt2800pci_bbp_write(rt2x00dev, 105, 0x05); - - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { - rt2800pci_bbp_write(rt2x00dev, 69, 0x16); - rt2800pci_bbp_write(rt2x00dev, 73, 0x12); - } - - if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) - rt2800pci_bbp_write(rt2x00dev, 84, 0x19); - - if (rt2x00_rt(&rt2x00dev->chip, RT3052)) { - rt2800pci_bbp_write(rt2x00dev, 31, 0x08); - rt2800pci_bbp_write(rt2x00dev, 78, 0x0e); - rt2800pci_bbp_write(rt2x00dev, 80, 0x08); - } - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - rt2800pci_bbp_write(rt2x00dev, reg_id, value); - } - } + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - return 0; -} - -static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev, - bool bw40, u8 rfcsr24, u8 filter_target) -{ - unsigned int i; - u8 bbp; - u8 rfcsr; - u8 passband; - u8 stopband; - u8 overtuned = 0; - - rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); - - rt2800pci_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); - rt2800pci_bbp_write(rt2x00dev, 4, bbp); - - rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); - rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr); - - /* - * Set power & frequency of passband test tone - */ - rt2800pci_bbp_write(rt2x00dev, 24, 0); - - for (i = 0; i < 100; i++) { - rt2800pci_bbp_write(rt2x00dev, 25, 0x90); - msleep(1); - - rt2800pci_bbp_read(rt2x00dev, 55, &passband); - if (passband) - break; - } - - /* - * Set power & frequency of stopband test tone - */ - rt2800pci_bbp_write(rt2x00dev, 24, 0x06); - - for (i = 0; i < 100; i++) { - rt2800pci_bbp_write(rt2x00dev, 25, 0x90); - msleep(1); - - rt2800pci_bbp_read(rt2x00dev, 55, &stopband); - - if ((passband - stopband) <= filter_target) { - rfcsr24++; - overtuned += ((passband - stopband) == filter_target); - } else - break; - - rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); - } - - rfcsr24 -= !!overtuned; - - rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24); - return rfcsr24; -} - -static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev) -{ - u8 rfcsr; - u8 bbp; - - if (!rt2x00_rf(&rt2x00dev->chip, RF3020) && - !rt2x00_rf(&rt2x00dev->chip, RF3021) && - !rt2x00_rf(&rt2x00dev->chip, RF3022)) - return 0; - - /* - * Init RF calibration. - */ - rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); - rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr); - msleep(1); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); - rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr); - - rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50); - rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01); - rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7); - rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75); - rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40); - rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03); - rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02); - rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50); - rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39); - rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f); - rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60); - rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21); - rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75); - rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75); - rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90); - rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58); - rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3); - rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92); - rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c); - rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02); - rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba); - rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb); - rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00); - rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31); - rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08); - rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01); - rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25); - rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23); - rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13); - rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83); - - /* - * Set RX Filter calibration for 20MHz and 40MHz - */ - rt2x00dev->calibration[0] = - rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16); - rt2x00dev->calibration[1] = - rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19); - - /* - * Set back to initial state - */ - rt2800pci_bbp_write(rt2x00dev, 24, 0); - - rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); - rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr); - - /* - * set BBP back to BW20 - */ - rt2800pci_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); - rt2800pci_bbp_write(rt2x00dev, 4, bbp); + rt2800_register_write(rt2x00dev, DELAY_INT_CFG, 0); return 0; } @@ -1926,11 +428,11 @@ static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, (state == STATE_RADIO_RX_ON) || (state == STATE_RADIO_RX_ON_LINK)); - rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); } static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, @@ -1944,11 +446,11 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, * should clear the register to assure a clean state. */ if (state == STATE_RADIO_IRQ_ON) { - rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); - rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); + rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®); + rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg); } - rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®); + rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®); rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, mask); rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, mask); rt2x00_set_field32(®, INT_MASK_CSR_RX_DONE, mask); @@ -1967,7 +469,7 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, INT_MASK_CSR_GPTIMER, mask); rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, mask); rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, mask); - rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg); + rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg); } static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) @@ -1976,7 +478,7 @@ static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) u32 reg; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) && !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY)) return 0; @@ -1998,50 +500,50 @@ static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev) */ if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) || rt2800pci_init_queues(rt2x00dev) || - rt2800pci_init_registers(rt2x00dev) || + rt2800_init_registers(rt2x00dev) || rt2800pci_wait_wpdma_ready(rt2x00dev) || - rt2800pci_init_bbp(rt2x00dev) || - rt2800pci_init_rfcsr(rt2x00dev))) + rt2800_init_bbp(rt2x00dev) || + rt2800_init_rfcsr(rt2x00dev))) return -EIO; /* * Send signal to firmware during boot time. */ - rt2800pci_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); + rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); /* * Enable RX. */ - rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); - rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2); rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); - rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); - rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); /* * Initialize LED control */ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); - rt2800pci_mcu_request(rt2x00dev, MCU_LED_1, 0xff, + rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff, word & 0xff, (word >> 8) & 0xff); rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); - rt2800pci_mcu_request(rt2x00dev, MCU_LED_2, 0xff, + rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff, word & 0xff, (word >> 8) & 0xff); rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); - rt2800pci_mcu_request(rt2x00dev, MCU_LED_3, 0xff, + rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff, word & 0xff, (word >> 8) & 0xff); return 0; @@ -2051,21 +553,21 @@ static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; - rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); - rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0); - rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0); - rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, 0); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); + rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); - rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280); - rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, ®); + rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®); rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1); rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1); rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1); @@ -2073,10 +575,10 @@ static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1); rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1); rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1); - rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg); + rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg); - rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); - rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); + rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); /* Wait for DMA, ignore error */ rt2800pci_wait_wpdma_ready(rt2x00dev); @@ -2090,10 +592,10 @@ static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev, * if the device is booting and wasn't asleep it will return * failure when attempting to wakeup. */ - rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); + rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); if (state == STATE_AWAKE) { - rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0); + rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0); rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP); } @@ -2195,7 +697,7 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size); rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID, test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? - (skbdesc->entry->entry_idx + 1) : 0xff); + txdesc->key_idx : 0xff); rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, skb->len - txdesc->l2pad); rt2x00_set_field32(&word, TXWI_W1_PACKETID, @@ -2204,8 +706,8 @@ static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, /* * Always write 0 to IV/EIV fields, hardware will insert the IV - * from the IVEIV register when ENTRY_TXD_ENCRYPT_IV is set to 0. - * When ENTRY_TXD_ENCRYPT_IV is set to 1 it will use the IV data + * from the IVEIV register when TXD_W3_WIV is set to 0. + * When TXD_W3_WIV is set to 1 it will use the IV data * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which * crypto entry in the registers should be used to encrypt the frame. */ @@ -2265,18 +767,18 @@ static void rt2800pci_write_beacon(struct queue_entry *entry) * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ - rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); /* * Write entire beacon with descriptor to register. */ beacon_base = HW_BEACON_OFFSET(entry->entry_idx); - rt2x00pci_register_multiwrite(rt2x00dev, + rt2800_register_multiwrite(rt2x00dev, beacon_base, skbdesc->desc, skbdesc->desc_len); - rt2x00pci_register_multiwrite(rt2x00dev, + rt2800_register_multiwrite(rt2x00dev, beacon_base + skbdesc->desc_len, entry->skb->data, entry->skb->len); @@ -2295,12 +797,12 @@ static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, u32 reg; if (queue_idx == QID_BEACON) { - rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) { rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); - rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); } return; } @@ -2316,7 +818,7 @@ static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, else qidx = queue_idx; - rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx); + rt2800_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx); } static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, @@ -2325,16 +827,16 @@ static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev, u32 reg; if (qid == QID_BEACON) { - rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, 0); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, 0); return; } - rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, ®); + rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®); rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE)); rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK)); rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI)); rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO)); - rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg); + rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg); } /* @@ -2430,7 +932,7 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry, * Set RX IDX in register to inform hardware that we have handled * this entry and it is available for reuse again. */ - rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx); + rt2800_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx); /* * Remove TXWI descriptor from start of buffer. @@ -2467,7 +969,7 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev) old_reg = 0; while (1) { - rt2x00pci_register_read(rt2x00dev, TX_STA_FIFO, ®); + rt2800_register_read(rt2x00dev, TX_STA_FIFO, ®); if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID)) break; @@ -2551,8 +1053,8 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) u32 reg; /* Read status and ACK all interrupts */ - rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); - rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); + rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®); + rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg); if (!reg) return IRQ_NONE; @@ -2709,7 +1211,7 @@ static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * Identify RF chipset. */ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip_rf(rt2x00dev, value, reg); if (!rt2x00_rf(&rt2x00dev->chip, RF2820) && @@ -2758,9 +1260,9 @@ static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * Store led settings, for correct led behaviour. */ #ifdef CONFIG_RT2X00_LIB_LEDS - rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); - rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg); #endif /* CONFIG_RT2X00_LIB_LEDS */ @@ -2948,10 +1450,25 @@ static int rt2800pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) return 0; } +static const struct rt2800_ops rt2800pci_rt2800_ops = { + .register_read = rt2x00pci_register_read, + .register_write = rt2x00pci_register_write, + .register_write_lock = rt2x00pci_register_write, /* same for PCI */ + + .register_multiread = rt2x00pci_register_multiread, + .register_multiwrite = rt2x00pci_register_multiwrite, + + .regbusy_read = rt2x00pci_regbusy_read, +}; + static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI); + + rt2x00dev->priv = (void *)&rt2800pci_rt2800_ops; + /* * Allocate eeprom data. */ @@ -2996,161 +1513,6 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) return 0; } -/* - * IEEE80211 stack callback functions. - */ -static void rt2800pci_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, - u32 *iv32, u16 *iv16) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct mac_iveiv_entry iveiv_entry; - u32 offset; - - offset = MAC_IVEIV_ENTRY(hw_key_idx); - rt2x00pci_register_multiread(rt2x00dev, offset, - &iveiv_entry, sizeof(iveiv_entry)); - - memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16)); - memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32)); -} - -static int rt2800pci_set_rts_threshold(struct ieee80211_hw *hw, u32 value) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); - - rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, ®); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); - rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, ®); - rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); - rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); - rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, ®); - rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); - rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, ®); - rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); - rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, ®); - rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); - rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, ®); - rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); - rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg); - - return 0; -} - -static int rt2800pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, - const struct ieee80211_tx_queue_params *params) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_queue *queue; - struct rt2x00_field32 field; - int retval; - u32 reg; - u32 offset; - - /* - * First pass the configuration through rt2x00lib, that will - * update the queue settings and validate the input. After that - * we are free to update the registers based on the value - * in the queue parameter. - */ - retval = rt2x00mac_conf_tx(hw, queue_idx, params); - if (retval) - return retval; - - /* - * We only need to perform additional register initialization - * for WMM queues/ - */ - if (queue_idx >= 4) - return 0; - - queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); - - /* Update WMM TXOP register */ - offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); - field.bit_offset = (queue_idx & 1) * 16; - field.bit_mask = 0xffff << field.bit_offset; - - rt2x00pci_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, queue->txop); - rt2x00pci_register_write(rt2x00dev, offset, reg); - - /* Update WMM registers */ - field.bit_offset = queue_idx * 4; - field.bit_mask = 0xf << field.bit_offset; - - rt2x00pci_register_read(rt2x00dev, WMM_AIFSN_CFG, ®); - rt2x00_set_field32(®, field, queue->aifs); - rt2x00pci_register_write(rt2x00dev, WMM_AIFSN_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, WMM_CWMIN_CFG, ®); - rt2x00_set_field32(®, field, queue->cw_min); - rt2x00pci_register_write(rt2x00dev, WMM_CWMIN_CFG, reg); - - rt2x00pci_register_read(rt2x00dev, WMM_CWMAX_CFG, ®); - rt2x00_set_field32(®, field, queue->cw_max); - rt2x00pci_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); - - /* Update EDCA registers */ - offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); - - rt2x00pci_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); - rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); - rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); - rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); - rt2x00pci_register_write(rt2x00dev, offset, reg); - - return 0; -} - -static u64 rt2800pci_get_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW1, ®); - tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32; - rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW0, ®); - tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD); - - return tsf; -} - -static const struct ieee80211_ops rt2800pci_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .configure_filter = rt2x00mac_configure_filter, - .set_key = rt2x00mac_set_key, - .get_stats = rt2x00mac_get_stats, - .get_tkip_seq = rt2800pci_get_tkip_seq, - .set_rts_threshold = rt2800pci_set_rts_threshold, - .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2800pci_conf_tx, - .get_tx_stats = rt2x00mac_get_tx_stats, - .get_tsf = rt2800pci_get_tsf, - .rfkill_poll = rt2x00mac_rfkill_poll, -}; - static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { .irq_handler = rt2800pci_interrupt, .probe_hw = rt2800pci_probe_hw, @@ -3162,23 +1524,23 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { .get_entry_state = rt2800pci_get_entry_state, .clear_entry = rt2800pci_clear_entry, .set_device_state = rt2800pci_set_device_state, - .rfkill_poll = rt2800pci_rfkill_poll, - .link_stats = rt2800pci_link_stats, - .reset_tuner = rt2800pci_reset_tuner, - .link_tuner = rt2800pci_link_tuner, + .rfkill_poll = rt2800_rfkill_poll, + .link_stats = rt2800_link_stats, + .reset_tuner = rt2800_reset_tuner, + .link_tuner = rt2800_link_tuner, .write_tx_desc = rt2800pci_write_tx_desc, .write_tx_data = rt2x00pci_write_tx_data, .write_beacon = rt2800pci_write_beacon, .kick_tx_queue = rt2800pci_kick_tx_queue, .kill_tx_queue = rt2800pci_kill_tx_queue, .fill_rxdone = rt2800pci_fill_rxdone, - .config_shared_key = rt2800pci_config_shared_key, - .config_pairwise_key = rt2800pci_config_pairwise_key, - .config_filter = rt2800pci_config_filter, - .config_intf = rt2800pci_config_intf, - .config_erp = rt2800pci_config_erp, - .config_ant = rt2800pci_config_ant, - .config = rt2800pci_config, + .config_shared_key = rt2800_config_shared_key, + .config_pairwise_key = rt2800_config_pairwise_key, + .config_filter = rt2800_config_filter, + .config_intf = rt2800_config_intf, + .config_erp = rt2800_config_erp, + .config_ant = rt2800_config_ant, + .config = rt2800_config, }; static const struct data_queue_desc rt2800pci_queue_rx = { @@ -3213,9 +1575,9 @@ static const struct rt2x00_ops rt2800pci_ops = { .tx = &rt2800pci_queue_tx, .bcn = &rt2800pci_queue_bcn, .lib = &rt2800pci_rt2x00_ops, - .hw = &rt2800pci_mac80211_ops, + .hw = &rt2800_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2800pci_rt2x00debug, + .debugfs = &rt2800_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h index 856908815221..1dbf13270cda 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.h +++ b/drivers/net/wireless/rt2x00/rt2800pci.h @@ -28,61 +28,6 @@ #define RT2800PCI_H /* - * RF chip defines. - * - * RF2820 2.4G 2T3R - * RF2850 2.4G/5G 2T3R - * RF2720 2.4G 1T2R - * RF2750 2.4G/5G 1T2R - * RF3020 2.4G 1T1R - * RF2020 2.4G B/G - * RF3021 2.4G 1T2R - * RF3022 2.4G 2T2R - * RF3052 2.4G 2T2R - */ -#define RF2820 0x0001 -#define RF2850 0x0002 -#define RF2720 0x0003 -#define RF2750 0x0004 -#define RF3020 0x0005 -#define RF2020 0x0006 -#define RF3021 0x0007 -#define RF3022 0x0008 -#define RF3052 0x0009 - -/* - * RT2860 version - */ -#define RT2860C_VERSION 0x28600100 -#define RT2860D_VERSION 0x28600101 -#define RT2880E_VERSION 0x28720200 -#define RT2883_VERSION 0x28830300 -#define RT3070_VERSION 0x30700200 - -/* - * Signal information. - * Default offset is required for RSSI <-> dBm conversion. - */ -#define DEFAULT_RSSI_OFFSET 120 /* FIXME */ - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x1000 -#define CSR_REG_SIZE 0x0800 -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0110 -#define BBP_BASE 0x0000 -#define BBP_SIZE 0x0080 -#define RF_BASE 0x0004 -#define RF_SIZE 0x0010 - -/* - * Number of TX queues. - */ -#define NUM_TX_QUEUES 4 - -/* * PCI registers. */ @@ -102,215 +47,6 @@ #define E2PROM_CSR_RELOAD FIELD32(0x00000080) /* - * INT_SOURCE_CSR: Interrupt source register. - * Write one to clear corresponding bit. - * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c - */ -#define INT_SOURCE_CSR 0x0200 -#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001) -#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002) -#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004) -#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008) -#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010) -#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020) -#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040) -#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080) -#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100) -#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200) -#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400) -#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800) -#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000) -#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000) -#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000) -#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000) -#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000) -#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000) - -/* - * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. - */ -#define INT_MASK_CSR 0x0204 -#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001) -#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002) -#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004) -#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008) -#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010) -#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020) -#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040) -#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080) -#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100) -#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200) -#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400) -#define INT_MASK_CSR_TBTT FIELD32(0x00000800) -#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000) -#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000) -#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000) -#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000) -#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000) -#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000) - -/* - * WPDMA_GLO_CFG - */ -#define WPDMA_GLO_CFG 0x0208 -#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001) -#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002) -#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004) -#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008) -#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030) -#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040) -#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080) -#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00) -#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000) - -/* - * WPDMA_RST_IDX - */ -#define WPDMA_RST_IDX 0x020c -#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001) -#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002) -#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004) -#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008) -#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010) -#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020) -#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000) - -/* - * DELAY_INT_CFG - */ -#define DELAY_INT_CFG 0x0210 -#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff) -#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00) -#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000) -#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000) -#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000) -#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000) - -/* - * WMM_AIFSN_CFG: Aifsn for each EDCA AC - * AIFSN0: AC_BE - * AIFSN1: AC_BK - * AIFSN1: AC_VI - * AIFSN1: AC_VO - */ -#define WMM_AIFSN_CFG 0x0214 -#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f) -#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0) -#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00) -#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000) - -/* - * WMM_CWMIN_CSR: CWmin for each EDCA AC - * CWMIN0: AC_BE - * CWMIN1: AC_BK - * CWMIN1: AC_VI - * CWMIN1: AC_VO - */ -#define WMM_CWMIN_CFG 0x0218 -#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f) -#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0) -#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00) -#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000) - -/* - * WMM_CWMAX_CSR: CWmax for each EDCA AC - * CWMAX0: AC_BE - * CWMAX1: AC_BK - * CWMAX1: AC_VI - * CWMAX1: AC_VO - */ -#define WMM_CWMAX_CFG 0x021c -#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f) -#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0) -#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00) -#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000) - -/* - * AC_TXOP0: AC_BK/AC_BE TXOP register - * AC0TXOP: AC_BK in unit of 32us - * AC1TXOP: AC_BE in unit of 32us - */ -#define WMM_TXOP0_CFG 0x0220 -#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff) -#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000) - -/* - * AC_TXOP1: AC_VO/AC_VI TXOP register - * AC2TXOP: AC_VI in unit of 32us - * AC3TXOP: AC_VO in unit of 32us - */ -#define WMM_TXOP1_CFG 0x0224 -#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff) -#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000) - -/* - * GPIO_CTRL_CFG: - */ -#define GPIO_CTRL_CFG 0x0228 -#define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001) -#define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002) -#define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004) -#define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008) -#define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010) -#define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020) -#define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040) -#define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080) -#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00000100) - -/* - * MCU_CMD_CFG - */ -#define MCU_CMD_CFG 0x022c - -/* - * AC_BK register offsets - */ -#define TX_BASE_PTR0 0x0230 -#define TX_MAX_CNT0 0x0234 -#define TX_CTX_IDX0 0x0238 -#define TX_DTX_IDX0 0x023c - -/* - * AC_BE register offsets - */ -#define TX_BASE_PTR1 0x0240 -#define TX_MAX_CNT1 0x0244 -#define TX_CTX_IDX1 0x0248 -#define TX_DTX_IDX1 0x024c - -/* - * AC_VI register offsets - */ -#define TX_BASE_PTR2 0x0250 -#define TX_MAX_CNT2 0x0254 -#define TX_CTX_IDX2 0x0258 -#define TX_DTX_IDX2 0x025c - -/* - * AC_VO register offsets - */ -#define TX_BASE_PTR3 0x0260 -#define TX_MAX_CNT3 0x0264 -#define TX_CTX_IDX3 0x0268 -#define TX_DTX_IDX3 0x026c - -/* - * HCCA register offsets - */ -#define TX_BASE_PTR4 0x0270 -#define TX_MAX_CNT4 0x0274 -#define TX_CTX_IDX4 0x0278 -#define TX_DTX_IDX4 0x027c - -/* - * MGMT register offsets - */ -#define TX_BASE_PTR5 0x0280 -#define TX_MAX_CNT5 0x0284 -#define TX_CTX_IDX5 0x0288 -#define TX_DTX_IDX5 0x028c - -/* * Queue register offset macros */ #define TX_QUEUE_REG_OFFSET 0x10 @@ -320,72 +56,6 @@ #define TX_DTX_IDX(__x) TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET) /* - * RX register offsets - */ -#define RX_BASE_PTR 0x0290 -#define RX_MAX_CNT 0x0294 -#define RX_CRX_IDX 0x0298 -#define RX_DRX_IDX 0x029c - -/* - * PBF_SYS_CTRL - * HOST_RAM_WRITE: enable Host program ram write selection - */ -#define PBF_SYS_CTRL 0x0400 -#define PBF_SYS_CTRL_READY FIELD32(0x00000080) -#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000) - -/* - * HOST-MCU shared memory - */ -#define HOST_CMD_CSR 0x0404 -#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff) - -/* - * PBF registers - * Most are for debug. Driver doesn't touch PBF register. - */ -#define PBF_CFG 0x0408 -#define PBF_MAX_PCNT 0x040c -#define PBF_CTRL 0x0410 -#define PBF_INT_STA 0x0414 -#define PBF_INT_ENA 0x0418 - -/* - * BCN_OFFSET0: - */ -#define BCN_OFFSET0 0x042c -#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff) -#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00) -#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000) -#define BCN_OFFSET0_BCN3 FIELD32(0xff000000) - -/* - * BCN_OFFSET1: - */ -#define BCN_OFFSET1 0x0430 -#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff) -#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00) -#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000) -#define BCN_OFFSET1_BCN7 FIELD32(0xff000000) - -/* - * PBF registers - * Most are for debug. Driver doesn't touch PBF register. - */ -#define TXRXQ_PCNT 0x0438 -#define PBF_DBG 0x043c - -/* - * RF registers - */ -#define RF_CSR_CFG 0x0500 -#define RF_CSR_CFG_DATA FIELD32(0x000000ff) -#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) -#define RF_CSR_CFG_WRITE FIELD32(0x00010000) -#define RF_CSR_CFG_BUSY FIELD32(0x00020000) - -/* * EFUSE_CSR: RT3090 EEPROM */ #define EFUSE_CTRL 0x0580 @@ -414,1360 +84,16 @@ #define EFUSE_DATA3 0x059c /* - * MAC Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * MAC_CSR0: ASIC revision number. - * ASIC_REV: 0 - * ASIC_VER: 2860 - */ -#define MAC_CSR0 0x1000 -#define MAC_CSR0_ASIC_REV FIELD32(0x0000ffff) -#define MAC_CSR0_ASIC_VER FIELD32(0xffff0000) - -/* - * MAC_SYS_CTRL: - */ -#define MAC_SYS_CTRL 0x1004 -#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001) -#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002) -#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004) -#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008) -#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010) -#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020) -#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040) -#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080) - -/* - * MAC_ADDR_DW0: STA MAC register 0 - */ -#define MAC_ADDR_DW0 0x1008 -#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff) -#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00) -#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000) -#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000) - -/* - * MAC_ADDR_DW1: STA MAC register 1 - * UNICAST_TO_ME_MASK: - * Used to mask off bits from byte 5 of the MAC address - * to determine the UNICAST_TO_ME bit for RX frames. - * The full mask is complemented by BSS_ID_MASK: - * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK - */ -#define MAC_ADDR_DW1 0x100c -#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff) -#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00) -#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) - -/* - * MAC_BSSID_DW0: BSSID register 0 - */ -#define MAC_BSSID_DW0 0x1010 -#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff) -#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00) -#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000) -#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000) - -/* - * MAC_BSSID_DW1: BSSID register 1 - * BSS_ID_MASK: - * 0: 1-BSSID mode (BSS index = 0) - * 1: 2-BSSID mode (BSS index: Byte5, bit 0) - * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1) - * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2) - * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the - * BSSID. This will make sure that those bits will be ignored - * when determining the MY_BSS of RX frames. - */ -#define MAC_BSSID_DW1 0x1014 -#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff) -#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00) -#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000) -#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000) - -/* - * MAX_LEN_CFG: Maximum frame length register. - * MAX_MPDU: rt2860b max 16k bytes - * MAX_PSDU: Maximum PSDU length - * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 - */ -#define MAX_LEN_CFG 0x1018 -#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff) -#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000) -#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000) -#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000) - -/* - * BBP_CSR_CFG: BBP serial control register - * VALUE: Register value to program into BBP - * REG_NUM: Selected BBP register - * READ_CONTROL: 0 write BBP, 1 read BBP - * BUSY: ASIC is busy executing BBP commands - * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks - * BBP_RW_MODE: 0 serial, 1 paralell - */ -#define BBP_CSR_CFG 0x101c -#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff) -#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00) -#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000) -#define BBP_CSR_CFG_BUSY FIELD32(0x00020000) -#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000) -#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000) - -/* - * RF_CSR_CFG0: RF control register - * REGID_AND_VALUE: Register value to program into RF - * BITWIDTH: Selected RF register - * STANDBYMODE: 0 high when standby, 1 low when standby - * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate - * BUSY: ASIC is busy executing RF commands - */ -#define RF_CSR_CFG0 0x1020 -#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff) -#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000) -#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff) -#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000) -#define RF_CSR_CFG0_SEL FIELD32(0x40000000) -#define RF_CSR_CFG0_BUSY FIELD32(0x80000000) - -/* - * RF_CSR_CFG1: RF control register - * REGID_AND_VALUE: Register value to program into RF - * RFGAP: Gap between BB_CONTROL_RF and RF_LE - * 0: 3 system clock cycle (37.5usec) - * 1: 5 system clock cycle (62.5usec) - */ -#define RF_CSR_CFG1 0x1024 -#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff) -#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000) - -/* - * RF_CSR_CFG2: RF control register - * VALUE: Register value to program into RF - * RFGAP: Gap between BB_CONTROL_RF and RF_LE - * 0: 3 system clock cycle (37.5usec) - * 1: 5 system clock cycle (62.5usec) - */ -#define RF_CSR_CFG2 0x1028 -#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff) - -/* - * LED_CFG: LED control - * color LED's: - * 0: off - * 1: blinking upon TX2 - * 2: periodic slow blinking - * 3: always on - * LED polarity: - * 0: active low - * 1: active high - */ -#define LED_CFG 0x102c -#define LED_CFG_ON_PERIOD FIELD32(0x000000ff) -#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00) -#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000) -#define LED_CFG_R_LED_MODE FIELD32(0x03000000) -#define LED_CFG_G_LED_MODE FIELD32(0x0c000000) -#define LED_CFG_Y_LED_MODE FIELD32(0x30000000) -#define LED_CFG_LED_POLAR FIELD32(0x40000000) - -/* - * XIFS_TIME_CFG: MAC timing - * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX - * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX - * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX - * when MAC doesn't reference BBP signal BBRXEND - * EIFS: unit 1us - * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer - * - */ -#define XIFS_TIME_CFG 0x1100 -#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff) -#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00) -#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000) -#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000) -#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000) - -/* - * BKOFF_SLOT_CFG: - */ -#define BKOFF_SLOT_CFG 0x1104 -#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff) -#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00) - -/* - * NAV_TIME_CFG: - */ -#define NAV_TIME_CFG 0x1108 -#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff) -#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00) -#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000) -#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000) - -/* - * CH_TIME_CFG: count as channel busy - */ -#define CH_TIME_CFG 0x110c - -/* - * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us - */ -#define PBF_LIFE_TIMER 0x1110 - -/* - * BCN_TIME_CFG: - * BEACON_INTERVAL: in unit of 1/16 TU - * TSF_TICKING: Enable TSF auto counting - * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode - * BEACON_GEN: Enable beacon generator - */ -#define BCN_TIME_CFG 0x1114 -#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff) -#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000) -#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000) -#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000) -#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000) -#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000) - -/* - * TBTT_SYNC_CFG: - */ -#define TBTT_SYNC_CFG 0x1118 - -/* - * TSF_TIMER_DW0: Local lsb TSF timer, read-only - */ -#define TSF_TIMER_DW0 0x111c -#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff) - -/* - * TSF_TIMER_DW1: Local msb TSF timer, read-only - */ -#define TSF_TIMER_DW1 0x1120 -#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff) - -/* - * TBTT_TIMER: TImer remains till next TBTT, read-only - */ -#define TBTT_TIMER 0x1124 - -/* - * INT_TIMER_CFG: - */ -#define INT_TIMER_CFG 0x1128 - -/* - * INT_TIMER_EN: GP-timer and pre-tbtt Int enable - */ -#define INT_TIMER_EN 0x112c - -/* - * CH_IDLE_STA: channel idle time - */ -#define CH_IDLE_STA 0x1130 - -/* - * CH_BUSY_STA: channel busy time - */ -#define CH_BUSY_STA 0x1134 - -/* - * MAC_STATUS_CFG: - * BBP_RF_BUSY: When set to 0, BBP and RF are stable. - * if 1 or higher one of the 2 registers is busy. - */ -#define MAC_STATUS_CFG 0x1200 -#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003) - -/* - * PWR_PIN_CFG: - */ -#define PWR_PIN_CFG 0x1204 - -/* - * AUTOWAKEUP_CFG: Manual power control / status register - * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set - * AUTOWAKE: 0:sleep, 1:awake - */ -#define AUTOWAKEUP_CFG 0x1208 -#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff) -#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00) -#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000) - -/* - * EDCA_AC0_CFG: - */ -#define EDCA_AC0_CFG 0x1300 -#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_AC1_CFG: - */ -#define EDCA_AC1_CFG 0x1304 -#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_AC2_CFG: - */ -#define EDCA_AC2_CFG 0x1308 -#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_AC3_CFG: - */ -#define EDCA_AC3_CFG 0x130c -#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_TID_AC_MAP: - */ -#define EDCA_TID_AC_MAP 0x1310 - -/* - * TX_PWR_CFG_0: - */ -#define TX_PWR_CFG_0 0x1314 -#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f) -#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0) -#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00) -#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000) -#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000) -#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000) -#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000) -#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_1: - */ -#define TX_PWR_CFG_1 0x1318 -#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f) -#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0) -#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00) -#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000) -#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000) -#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000) -#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000) -#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_2: - */ -#define TX_PWR_CFG_2 0x131c -#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f) -#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0) -#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00) -#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000) -#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000) -#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000) -#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000) -#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_3: - */ -#define TX_PWR_CFG_3 0x1320 -#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f) -#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0) -#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00) -#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000) -#define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000) -#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000) -#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000) -#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_4: - */ -#define TX_PWR_CFG_4 0x1324 -#define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f) -#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0) -#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00) -#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000) - -/* - * TX_PIN_CFG: - */ -#define TX_PIN_CFG 0x1328 -#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001) -#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002) -#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004) -#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008) -#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010) -#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020) -#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040) -#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080) -#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100) -#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200) -#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400) -#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800) -#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000) -#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000) -#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000) -#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000) -#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000) -#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000) -#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000) -#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000) - -/* - * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz - */ -#define TX_BAND_CFG 0x132c -#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001) -#define TX_BAND_CFG_A FIELD32(0x00000002) -#define TX_BAND_CFG_BG FIELD32(0x00000004) - -/* - * TX_SW_CFG0: - */ -#define TX_SW_CFG0 0x1330 - -/* - * TX_SW_CFG1: - */ -#define TX_SW_CFG1 0x1334 - -/* - * TX_SW_CFG2: - */ -#define TX_SW_CFG2 0x1338 - -/* - * TXOP_THRES_CFG: - */ -#define TXOP_THRES_CFG 0x133c - -/* - * TXOP_CTRL_CFG: - */ -#define TXOP_CTRL_CFG 0x1340 - -/* - * TX_RTS_CFG: - * RTS_THRES: unit:byte - * RTS_FBK_EN: enable rts rate fallback - */ -#define TX_RTS_CFG 0x1344 -#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff) -#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00) -#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000) - -/* - * TX_TIMEOUT_CFG: - * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us - * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure - * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation. - * it is recommended that: - * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) - */ -#define TX_TIMEOUT_CFG 0x1348 -#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0) -#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00) -#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000) - -/* - * TX_RTY_CFG: - * SHORT_RTY_LIMIT: short retry limit - * LONG_RTY_LIMIT: long retry limit - * LONG_RTY_THRE: Long retry threshoold - * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode - * 0:expired by retry limit, 1: expired by mpdu life timer - * AGG_RTY_MODE: Aggregate MPDU retry mode - * 0:expired by retry limit, 1: expired by mpdu life timer - * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable - */ -#define TX_RTY_CFG 0x134c -#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff) -#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00) -#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000) -#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000) -#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000) -#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000) - -/* - * TX_LINK_CFG: - * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us - * MFB_ENABLE: TX apply remote MFB 1:enable - * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable - * 0: not apply remote remote unsolicit (MFS=7) - * TX_MRQ_EN: MCS request TX enable - * TX_RDG_EN: RDG TX enable - * TX_CF_ACK_EN: Piggyback CF-ACK enable - * REMOTE_MFB: remote MCS feedback - * REMOTE_MFS: remote MCS feedback sequence number - */ -#define TX_LINK_CFG 0x1350 -#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff) -#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100) -#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200) -#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400) -#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800) -#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000) -#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000) -#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000) - -/* - * HT_FBK_CFG0: - */ -#define HT_FBK_CFG0 0x1354 -#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f) -#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0) -#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00) -#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000) -#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000) -#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000) -#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000) -#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000) - -/* - * HT_FBK_CFG1: - */ -#define HT_FBK_CFG1 0x1358 -#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f) -#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0) -#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00) -#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000) -#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000) -#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000) -#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000) -#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000) - -/* - * LG_FBK_CFG0: - */ -#define LG_FBK_CFG0 0x135c -#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f) -#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0) -#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00) -#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000) -#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000) -#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000) -#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000) -#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000) - -/* - * LG_FBK_CFG1: - */ -#define LG_FBK_CFG1 0x1360 -#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f) -#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0) -#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00) -#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000) - -/* - * CCK_PROT_CFG: CCK Protection - * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd) - * PROTECT_CTRL: Protection control frame type for CCK TX - * 0:none, 1:RTS/CTS, 2:CTS-to-self - * PROTECT_NAV: TXOP protection type for CCK TX - * 0:none, 1:ShortNAVprotect, 2:LongNAVProtect - * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow - * RTS_TH_EN: RTS threshold enable on CCK TX - */ -#define CCK_PROT_CFG 0x1364 -#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define CCK_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * OFDM_PROT_CFG: OFDM Protection - */ -#define OFDM_PROT_CFG 0x1368 -#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define OFDM_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * MM20_PROT_CFG: MM20 Protection - */ -#define MM20_PROT_CFG 0x136c -#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define MM20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * MM40_PROT_CFG: MM40 Protection - */ -#define MM40_PROT_CFG 0x1370 -#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define MM40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * GF20_PROT_CFG: GF20 Protection - */ -#define GF20_PROT_CFG 0x1374 -#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define GF20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * GF40_PROT_CFG: GF40 Protection - */ -#define GF40_PROT_CFG 0x1378 -#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define GF40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * EXP_CTS_TIME: - */ -#define EXP_CTS_TIME 0x137c - -/* - * EXP_ACK_TIME: - */ -#define EXP_ACK_TIME 0x1380 - -/* - * RX_FILTER_CFG: RX configuration register. - */ -#define RX_FILTER_CFG 0x1400 -#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001) -#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002) -#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004) -#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008) -#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010) -#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020) -#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040) -#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080) -#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100) -#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200) -#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400) -#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800) -#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000) -#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000) -#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000) -#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000) -#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000) - -/* - * AUTO_RSP_CFG: - * AUTORESPONDER: 0: disable, 1: enable - * BAC_ACK_POLICY: 0:long, 1:short preamble - * CTS_40_MMODE: Response CTS 40MHz duplicate mode - * CTS_40_MREF: Response CTS 40MHz duplicate mode - * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble - * DUAL_CTS_EN: Power bit value in control frame - * ACK_CTS_PSM_BIT:Power bit value in control frame - */ -#define AUTO_RSP_CFG 0x1404 -#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001) -#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002) -#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004) -#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008) -#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010) -#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040) -#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080) - -/* - * LEGACY_BASIC_RATE: - */ -#define LEGACY_BASIC_RATE 0x1408 - -/* - * HT_BASIC_RATE: - */ -#define HT_BASIC_RATE 0x140c - -/* - * HT_CTRL_CFG: - */ -#define HT_CTRL_CFG 0x1410 - -/* - * SIFS_COST_CFG: - */ -#define SIFS_COST_CFG 0x1414 - -/* - * RX_PARSER_CFG: - * Set NAV for all received frames - */ -#define RX_PARSER_CFG 0x1418 - -/* - * TX_SEC_CNT0: - */ -#define TX_SEC_CNT0 0x1500 - -/* - * RX_SEC_CNT0: - */ -#define RX_SEC_CNT0 0x1504 - -/* - * CCMP_FC_MUTE: - */ -#define CCMP_FC_MUTE 0x1508 - -/* - * TXOP_HLDR_ADDR0: - */ -#define TXOP_HLDR_ADDR0 0x1600 - -/* - * TXOP_HLDR_ADDR1: - */ -#define TXOP_HLDR_ADDR1 0x1604 - -/* - * TXOP_HLDR_ET: - */ -#define TXOP_HLDR_ET 0x1608 - -/* - * QOS_CFPOLL_RA_DW0: - */ -#define QOS_CFPOLL_RA_DW0 0x160c - -/* - * QOS_CFPOLL_RA_DW1: - */ -#define QOS_CFPOLL_RA_DW1 0x1610 - -/* - * QOS_CFPOLL_QC: - */ -#define QOS_CFPOLL_QC 0x1614 - -/* - * RX_STA_CNT0: RX PLCP error count & RX CRC error count - */ -#define RX_STA_CNT0 0x1700 -#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff) -#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000) - -/* - * RX_STA_CNT1: RX False CCA count & RX LONG frame count - */ -#define RX_STA_CNT1 0x1704 -#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff) -#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000) - -/* - * RX_STA_CNT2: - */ -#define RX_STA_CNT2 0x1708 -#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff) -#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000) - -/* - * TX_STA_CNT0: TX Beacon count - */ -#define TX_STA_CNT0 0x170c -#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff) -#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000) - -/* - * TX_STA_CNT1: TX tx count - */ -#define TX_STA_CNT1 0x1710 -#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff) -#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000) - -/* - * TX_STA_CNT2: TX tx count - */ -#define TX_STA_CNT2 0x1714 -#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff) -#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000) - -/* - * TX_STA_FIFO: TX Result for specific PID status fifo register - */ -#define TX_STA_FIFO 0x1718 -#define TX_STA_FIFO_VALID FIELD32(0x00000001) -#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e) -#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020) -#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040) -#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080) -#define TX_STA_FIFO_WCID FIELD32(0x0000ff00) -#define TX_STA_FIFO_MCS FIELD32(0x007f0000) -#define TX_STA_FIFO_PHYMODE FIELD32(0xc0000000) - -/* - * TX_AGG_CNT: Debug counter - */ -#define TX_AGG_CNT 0x171c -#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT0: - */ -#define TX_AGG_CNT0 0x1720 -#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT1: - */ -#define TX_AGG_CNT1 0x1724 -#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT2: - */ -#define TX_AGG_CNT2 0x1728 -#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT3: - */ -#define TX_AGG_CNT3 0x172c -#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT4: - */ -#define TX_AGG_CNT4 0x1730 -#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT5: - */ -#define TX_AGG_CNT5 0x1734 -#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT6: - */ -#define TX_AGG_CNT6 0x1738 -#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT7: - */ -#define TX_AGG_CNT7 0x173c -#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000) - -/* - * MPDU_DENSITY_CNT: - * TX_ZERO_DEL: TX zero length delimiter count - * RX_ZERO_DEL: RX zero length delimiter count - */ -#define MPDU_DENSITY_CNT 0x1740 -#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff) -#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000) - -/* - * Security key table memory. - * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry - * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry - * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry - * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry - * SHARED_KEY_TABLE_BASE: 32 bytes * 32-entry - * SHARED_KEY_MODE_BASE: 4 bits * 32-entry - */ -#define MAC_WCID_BASE 0x1800 -#define PAIRWISE_KEY_TABLE_BASE 0x4000 -#define MAC_IVEIV_TABLE_BASE 0x6000 -#define MAC_WCID_ATTRIBUTE_BASE 0x6800 -#define SHARED_KEY_TABLE_BASE 0x6c00 -#define SHARED_KEY_MODE_BASE 0x7000 - -#define MAC_WCID_ENTRY(__idx) \ - ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) ) -#define PAIRWISE_KEY_ENTRY(__idx) \ - ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) -#define MAC_IVEIV_ENTRY(__idx) \ - ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) ) -#define MAC_WCID_ATTR_ENTRY(__idx) \ - ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) -#define SHARED_KEY_ENTRY(__idx) \ - ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) -#define SHARED_KEY_MODE_ENTRY(__idx) \ - ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) ) - -struct mac_wcid_entry { - u8 mac[6]; - u8 reserved[2]; -} __attribute__ ((packed)); - -struct hw_key_entry { - u8 key[16]; - u8 tx_mic[8]; - u8 rx_mic[8]; -} __attribute__ ((packed)); - -struct mac_iveiv_entry { - u8 iv[8]; -} __attribute__ ((packed)); - -/* - * MAC_WCID_ATTRIBUTE: - */ -#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001) -#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e) -#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070) -#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380) - -/* - * SHARED_KEY_MODE: - */ -#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007) -#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070) -#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700) -#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000) -#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000) -#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000) -#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000) -#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000) - -/* - * HOST-MCU communication - */ - -/* - * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. - */ -#define H2M_MAILBOX_CSR 0x7010 -#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) -#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) -#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) -#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) - -/* - * H2M_MAILBOX_CID: - */ -#define H2M_MAILBOX_CID 0x7014 -#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff) -#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00) -#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000) -#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000) - -/* - * H2M_MAILBOX_STATUS: - */ -#define H2M_MAILBOX_STATUS 0x701c - -/* - * H2M_INT_SRC: - */ -#define H2M_INT_SRC 0x7024 - -/* - * H2M_BBP_AGENT: - */ -#define H2M_BBP_AGENT 0x7028 - -/* - * MCU_LEDCS: LED control for MCU Mailbox. - */ -#define MCU_LEDCS_LED_MODE FIELD8(0x1f) -#define MCU_LEDCS_POLARITY FIELD8(0x01) - -/* - * HW_CS_CTS_BASE: - * Carrier-sense CTS frame base address. - * It's where mac stores carrier-sense frame for carrier-sense function. - */ -#define HW_CS_CTS_BASE 0x7700 - -/* - * HW_DFS_CTS_BASE: - * FS CTS frame base address. It's where mac stores CTS frame for DFS. - */ -#define HW_DFS_CTS_BASE 0x7780 - -/* - * TXRX control registers - base address 0x3000 - */ - -/* - * TXRX_CSR1: - * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. - */ -#define TXRX_CSR1 0x77d0 - -/* - * HW_DEBUG_SETTING_BASE: - * since NULL frame won't be that long (256 byte) - * We steal 16 tail bytes to save debugging settings - */ -#define HW_DEBUG_SETTING_BASE 0x77f0 -#define HW_DEBUG_SETTING_BASE2 0x7770 - -/* - * HW_BEACON_BASE - * In order to support maximum 8 MBSS and its maximum length - * is 512 bytes for each beacon - * Three section discontinue memory segments will be used. - * 1. The original region for BCN 0~3 - * 2. Extract memory from FCE table for BCN 4~5 - * 3. Extract memory from Pair-wise key table for BCN 6~7 - * It occupied those memory of wcid 238~253 for BCN 6 - * and wcid 222~237 for BCN 7 - * - * IMPORTANT NOTE: Not sure why legacy driver does this, - * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6. - */ -#define HW_BEACON_BASE0 0x7800 -#define HW_BEACON_BASE1 0x7a00 -#define HW_BEACON_BASE2 0x7c00 -#define HW_BEACON_BASE3 0x7e00 -#define HW_BEACON_BASE4 0x7200 -#define HW_BEACON_BASE5 0x7400 -#define HW_BEACON_BASE6 0x5dc0 -#define HW_BEACON_BASE7 0x5bc0 - -#define HW_BEACON_OFFSET(__index) \ - ( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \ - (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \ - (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) ) - -/* * 8051 firmware image. */ #define FIRMWARE_RT2860 "rt2860.bin" #define FIRMWARE_IMAGE_BASE 0x2000 /* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * BBP 1: TX Antenna - */ -#define BBP1_TX_POWER FIELD8(0x07) -#define BBP1_TX_ANTENNA FIELD8(0x18) - -/* - * BBP 3: RX Antenna - */ -#define BBP3_RX_ANTENNA FIELD8(0x18) -#define BBP3_HT40_PLUS FIELD8(0x20) - -/* - * BBP 4: Bandwidth - */ -#define BBP4_TX_BF FIELD8(0x01) -#define BBP4_BANDWIDTH FIELD8(0x18) - -/* - * RFCSR registers - * The wordsize of the RFCSR is 8 bits. - */ - -/* - * RFCSR 6: - */ -#define RFCSR6_R FIELD8(0x03) - -/* - * RFCSR 7: - */ -#define RFCSR7_RF_TUNING FIELD8(0x01) - -/* - * RFCSR 12: - */ -#define RFCSR12_TX_POWER FIELD8(0x1f) - -/* - * RFCSR 22: - */ -#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) - -/* - * RFCSR 23: - */ -#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) - -/* - * RFCSR 30: - */ -#define RFCSR30_RF_CALIBRATION FIELD8(0x80) - -/* - * RF registers - */ - -/* - * RF 2 - */ -#define RF2_ANTENNA_RX2 FIELD32(0x00000040) -#define RF2_ANTENNA_TX1 FIELD32(0x00004000) -#define RF2_ANTENNA_RX1 FIELD32(0x00020000) - -/* - * RF 3 - */ -#define RF3_TXPOWER_G FIELD32(0x00003e00) -#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200) -#define RF3_TXPOWER_A FIELD32(0x00003c00) - -/* - * RF 4 - */ -#define RF4_TXPOWER_G FIELD32(0x000007c0) -#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040) -#define RF4_TXPOWER_A FIELD32(0x00000780) -#define RF4_FREQ_OFFSET FIELD32(0x001f8000) -#define RF4_HT40 FIELD32(0x00200000) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -/* - * EEPROM Version - */ -#define EEPROM_VERSION 0x0001 -#define EEPROM_VERSION_FAE FIELD16(0x00ff) -#define EEPROM_VERSION_VERSION FIELD16(0xff00) - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM ANTENNA config - * RXPATH: 1: 1R, 2: 2R, 3: 3R - * TXPATH: 1: 1T, 2: 2T - */ -#define EEPROM_ANTENNA 0x001a -#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f) -#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00) - -/* - * EEPROM NIC config - * CARDBUS_ACCEL: 0 - enable, 1 - disable - */ -#define EEPROM_NIC 0x001b -#define EEPROM_NIC_HW_RADIO FIELD16(0x0001) -#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002) -#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004) -#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008) -#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010) -#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020) -#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040) -#define EEPROM_NIC_WPS_PBC FIELD16(0x0080) -#define EEPROM_NIC_BW40M_BG FIELD16(0x0100) -#define EEPROM_NIC_BW40M_A FIELD16(0x0200) - -/* - * EEPROM frequency - */ -#define EEPROM_FREQ 0x001d -#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) -#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00) -#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000) - -/* - * EEPROM LED - * POLARITY_RDY_G: Polarity RDY_G setting. - * POLARITY_RDY_A: Polarity RDY_A setting. - * POLARITY_ACT: Polarity ACT setting. - * POLARITY_GPIO_0: Polarity GPIO0 setting. - * POLARITY_GPIO_1: Polarity GPIO1 setting. - * POLARITY_GPIO_2: Polarity GPIO2 setting. - * POLARITY_GPIO_3: Polarity GPIO3 setting. - * POLARITY_GPIO_4: Polarity GPIO4 setting. - * LED_MODE: Led mode. - */ -#define EEPROM_LED1 0x001e -#define EEPROM_LED2 0x001f -#define EEPROM_LED3 0x0020 -#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001) -#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) -#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) -#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) -#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) -#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) -#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) -#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) -#define EEPROM_LED_LED_MODE FIELD16(0x1f00) - -/* - * EEPROM LNA - */ -#define EEPROM_LNA 0x0022 -#define EEPROM_LNA_BG FIELD16(0x00ff) -#define EEPROM_LNA_A0 FIELD16(0xff00) - -/* - * EEPROM RSSI BG offset - */ -#define EEPROM_RSSI_BG 0x0023 -#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff) -#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00) - -/* - * EEPROM RSSI BG2 offset - */ -#define EEPROM_RSSI_BG2 0x0024 -#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff) -#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00) - -/* - * EEPROM RSSI A offset - */ -#define EEPROM_RSSI_A 0x0025 -#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff) -#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00) - -/* - * EEPROM RSSI A2 offset - */ -#define EEPROM_RSSI_A2 0x0026 -#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff) -#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00) - -/* - * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power. - * This is delta in 40MHZ. - * VALUE: Tx Power dalta value (MAX=4) - * TYPE: 1: Plus the delta value, 0: minus the delta value - * TXPOWER: Enable: - */ -#define EEPROM_TXPOWER_DELTA 0x0028 -#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f) -#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040) -#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080) - -/* - * EEPROM TXPOWER 802.11BG - */ -#define EEPROM_TXPOWER_BG1 0x0029 -#define EEPROM_TXPOWER_BG2 0x0030 -#define EEPROM_TXPOWER_BG_SIZE 7 -#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00) - -/* - * EEPROM TXPOWER 802.11A - */ -#define EEPROM_TXPOWER_A1 0x003c -#define EEPROM_TXPOWER_A2 0x0053 -#define EEPROM_TXPOWER_A_SIZE 6 -#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) - -/* - * EEPROM TXpower byrate: 20MHZ power - */ -#define EEPROM_TXPOWER_BYRATE 0x006f - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x0078 -#define EEPROM_BBP_SIZE 16 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * MCU mailbox commands. - */ -#define MCU_SLEEP 0x30 -#define MCU_WAKEUP 0x31 -#define MCU_RADIO_OFF 0x35 -#define MCU_CURRENT 0x36 -#define MCU_LED 0x50 -#define MCU_LED_STRENGTH 0x51 -#define MCU_LED_1 0x52 -#define MCU_LED_2 0x53 -#define MCU_LED_3 0x54 -#define MCU_RADAR 0x60 -#define MCU_BOOT_SIGNAL 0x72 -#define MCU_BBP_SIGNAL 0x80 -#define MCU_POWER_SAVE 0x83 - -/* - * MCU mailbox tokens - */ -#define TOKEN_WAKUP 3 - -/* * DMA descriptor defines. */ #define TXD_DESC_SIZE ( 4 * sizeof(__le32) ) -#define TXWI_DESC_SIZE ( 4 * sizeof(__le32) ) #define RXD_DESC_SIZE ( 4 * sizeof(__le32) ) -#define RXWI_DESC_SIZE ( 4 * sizeof(__le32) ) /* * TX descriptor format for TX, PRIO and Beacon Ring. @@ -1806,52 +132,6 @@ struct mac_iveiv_entry { #define TXD_W3_ICO FIELD32(0x80000000) /* - * TX WI structure - */ - -/* - * Word0 - * FRAG: 1 To inform TKIP engine this is a fragment. - * MIMO_PS: The remote peer is in dynamic MIMO-PS mode - * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs - * BW: Channel bandwidth 20MHz or 40 MHz - * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED - */ -#define TXWI_W0_FRAG FIELD32(0x00000001) -#define TXWI_W0_MIMO_PS FIELD32(0x00000002) -#define TXWI_W0_CF_ACK FIELD32(0x00000004) -#define TXWI_W0_TS FIELD32(0x00000008) -#define TXWI_W0_AMPDU FIELD32(0x00000010) -#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0) -#define TXWI_W0_TX_OP FIELD32(0x00000300) -#define TXWI_W0_MCS FIELD32(0x007f0000) -#define TXWI_W0_BW FIELD32(0x00800000) -#define TXWI_W0_SHORT_GI FIELD32(0x01000000) -#define TXWI_W0_STBC FIELD32(0x06000000) -#define TXWI_W0_IFS FIELD32(0x08000000) -#define TXWI_W0_PHYMODE FIELD32(0xc0000000) - -/* - * Word1 - */ -#define TXWI_W1_ACK FIELD32(0x00000001) -#define TXWI_W1_NSEQ FIELD32(0x00000002) -#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc) -#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00) -#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) -#define TXWI_W1_PACKETID FIELD32(0xf0000000) - -/* - * Word2 - */ -#define TXWI_W2_IV FIELD32(0xffffffff) - -/* - * Word3 - */ -#define TXWI_W3_EIV FIELD32(0xffffffff) - -/* * RX descriptor format for RX Ring. */ @@ -1897,64 +177,4 @@ struct mac_iveiv_entry { #define RXD_W3_PLCP_SIGNAL FIELD32(0x00020000) #define RXD_W3_PLCP_RSSI FIELD32(0x00040000) -/* - * RX WI structure - */ - -/* - * Word0 - */ -#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff) -#define RXWI_W0_KEY_INDEX FIELD32(0x00000300) -#define RXWI_W0_BSSID FIELD32(0x00001c00) -#define RXWI_W0_UDF FIELD32(0x0000e000) -#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) -#define RXWI_W0_TID FIELD32(0xf0000000) - -/* - * Word1 - */ -#define RXWI_W1_FRAG FIELD32(0x0000000f) -#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0) -#define RXWI_W1_MCS FIELD32(0x007f0000) -#define RXWI_W1_BW FIELD32(0x00800000) -#define RXWI_W1_SHORT_GI FIELD32(0x01000000) -#define RXWI_W1_STBC FIELD32(0x06000000) -#define RXWI_W1_PHYMODE FIELD32(0xc0000000) - -/* - * Word2 - */ -#define RXWI_W2_RSSI0 FIELD32(0x000000ff) -#define RXWI_W2_RSSI1 FIELD32(0x0000ff00) -#define RXWI_W2_RSSI2 FIELD32(0x00ff0000) - -/* - * Word3 - */ -#define RXWI_W3_SNR0 FIELD32(0x000000ff) -#define RXWI_W3_SNR1 FIELD32(0x0000ff00) - -/* - * Macros for converting txpower from EEPROM to mac80211 value - * and from mac80211 value to register value. - */ -#define MIN_G_TXPOWER 0 -#define MIN_A_TXPOWER -7 -#define MAX_G_TXPOWER 31 -#define MAX_A_TXPOWER 15 -#define DEFAULT_TXPOWER 5 - -#define TXPOWER_G_FROM_DEV(__txpower) \ - ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) - -#define TXPOWER_G_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER) - -#define TXPOWER_A_FROM_DEV(__txpower) \ - ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) - -#define TXPOWER_A_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER) - #endif /* RT2800PCI_H */ diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 9fe770f7d7bb..ce2e893856c1 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -34,6 +34,8 @@ #include "rt2x00.h" #include "rt2x00usb.h" +#include "rt2800lib.h" +#include "rt2800.h" #include "rt2800usb.h" /* @@ -44,1027 +46,6 @@ module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); /* - * Register access. - * All access to the CSR registers will go through the methods - * rt2x00usb_register_read and rt2x00usb_register_write. - * BBP and RF register require indirect register access, - * and use the CSR registers BBPCSR and RFCSR to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - * The _lock versions must be used if you already hold the csr_mutex - */ -#define WAIT_FOR_BBP(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) -#define WAIT_FOR_RFCSR(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) -#define WAIT_FOR_RF(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) -#define WAIT_FOR_MCU(__dev, __reg) \ - rt2x00usb_regbusy_read((__dev), H2M_MAILBOX_CSR, \ - H2M_MAILBOX_CSR_OWNER, (__reg)) - -static void rt2800usb_bbp_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBP_CSR_CFG_VALUE, value); - rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); - rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 0); - - rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_bbp_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBP_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, BBP_CSR_CFG_BUSY, 1); - rt2x00_set_field32(®, BBP_CSR_CFG_READ_CONTROL, 1); - - rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); - - WAIT_FOR_BBP(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RFCSR becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); - rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); - rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - - rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RFCSR becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); - rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); - rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - - rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg); - - WAIT_FOR_RFCSR(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RF becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RF(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RF_CSR_CFG0_REG_VALUE_BW, value); - rt2x00_set_field32(®, RF_CSR_CFG0_STANDBYMODE, 0); - rt2x00_set_field32(®, RF_CSR_CFG0_SEL, 0); - rt2x00_set_field32(®, RF_CSR_CFG0_BUSY, 1); - - rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg); - rt2x00_rf_write(rt2x00dev, word, value); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev, - const u8 command, const u8 token, - const u8 arg0, const u8 arg1) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the MCU becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_MCU(rt2x00dev, ®)) { - rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); - rt2x00usb_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg); - - reg = 0; - rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); - rt2x00usb_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -static const struct rt2x00debug rt2800usb_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2x00usb_register_read, - .write = rt2x00usb_register_write, - .flags = RT2X00DEBUGFS_OFFSET, - .word_base = CSR_REG_BASE, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_base = EEPROM_BASE, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2800usb_bbp_read, - .write = rt2800usb_bbp_write, - .word_base = BBP_BASE, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2800usb_rf_write, - .word_base = RF_BASE, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); - return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2); -} - -#ifdef CONFIG_RT2X00_LIB_LEDS -static void rt2800usb_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - unsigned int enabled = brightness != LED_OFF; - unsigned int bg_mode = - (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ); - unsigned int polarity = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_POLARITY); - unsigned int ledmode = - rt2x00_get_field16(led->rt2x00dev->led_mcu_reg, - EEPROM_FREQ_LED_MODE); - - if (led->type == LED_TYPE_RADIO) { - rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? 0x20 : 0); - } else if (led->type == LED_TYPE_ASSOC) { - rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode, - enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20); - } else if (led->type == LED_TYPE_QUALITY) { - /* - * The brightness is divided into 6 levels (0 - 5), - * The specs tell us the following levels: - * 0, 1 ,3, 7, 15, 31 - * to determine the level in a simple way we can simply - * work with bitshifting: - * (1 << level) - 1 - */ - rt2800usb_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff, - (1 << brightness / (LED_FULL / 6)) - 1, - polarity); - } -} - -static int rt2800usb_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, - unsigned long *delay_off) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - u32 reg; - - rt2x00usb_register_read(led->rt2x00dev, LED_CFG, ®); - rt2x00_set_field32(®, LED_CFG_ON_PERIOD, *delay_on); - rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); - rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); - rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); - rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); - rt2x00usb_register_write(led->rt2x00dev, LED_CFG, reg); - - return 0; -} - -static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, - enum led_type type) -{ - led->rt2x00dev = rt2x00dev; - led->type = type; - led->led_dev.brightness_set = rt2800usb_brightness_set; - led->led_dev.blink_set = rt2800usb_blink_set; - led->flags = LED_INITIALIZED; -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -/* - * Configuration handlers. - */ -static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct mac_wcid_entry wcid_entry; - struct mac_iveiv_entry iveiv_entry; - u32 offset; - u32 reg; - - offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx); - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_KEYTAB, - !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_CIPHER, - (crypto->cmd == SET_KEY) * crypto->cipher); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_BSS_IDX, - (crypto->cmd == SET_KEY) * crypto->bssidx); - rt2x00_set_field32(®, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - offset = MAC_IVEIV_ENTRY(key->hw_key_idx); - - memset(&iveiv_entry, 0, sizeof(iveiv_entry)); - if ((crypto->cipher == CIPHER_TKIP) || - (crypto->cipher == CIPHER_TKIP_NO_MIC) || - (crypto->cipher == CIPHER_AES)) - iveiv_entry.iv[3] |= 0x20; - iveiv_entry.iv[3] |= key->keyidx << 6; - rt2x00usb_register_multiwrite(rt2x00dev, offset, - &iveiv_entry, sizeof(iveiv_entry)); - - offset = MAC_WCID_ENTRY(key->hw_key_idx); - - memset(&wcid_entry, 0, sizeof(wcid_entry)); - if (crypto->cmd == SET_KEY) - memcpy(&wcid_entry, crypto->address, ETH_ALEN); - rt2x00usb_register_multiwrite(rt2x00dev, offset, - &wcid_entry, sizeof(wcid_entry)); -} - -static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - struct rt2x00_field32 field; - int timeout; - u32 offset; - u32 reg; - - if (crypto->cmd == SET_KEY) { - key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx; - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = SHARED_KEY_ENTRY(key->hw_key_idx); - timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - offset, &key_entry, - sizeof(key_entry), - timeout); - } - - /* - * The cipher types are stored over multiple registers - * starting with SHARED_KEY_MODE_BASE each word will have - * 32 bits and contains the cipher types for 2 bssidx each. - * Using the correct defines correctly will cause overhead, - * so just calculate the correct offset. - */ - field.bit_offset = 4 * (key->hw_key_idx % 8); - field.bit_mask = 0x7 << field.bit_offset; - - offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8); - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, - (crypto->cmd == SET_KEY) * crypto->cipher); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - /* - * Update WCID information - */ - rt2800usb_config_wcid_attr(rt2x00dev, crypto, key); - - return 0; -} - -static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_crypto *crypto, - struct ieee80211_key_conf *key) -{ - struct hw_key_entry key_entry; - int timeout; - u32 offset; - - if (crypto->cmd == SET_KEY) { - /* - * 1 pairwise key is possible per AID, this means that the AID - * equals our hw_key_idx. Make sure the WCID starts _after_ the - * last possible shared key entry. - */ - if (crypto->aid > (256 - 32)) - return -ENOSPC; - - key->hw_key_idx = 32 + crypto->aid; - - memcpy(key_entry.key, crypto->key, - sizeof(key_entry.key)); - memcpy(key_entry.tx_mic, crypto->tx_mic, - sizeof(key_entry.tx_mic)); - memcpy(key_entry.rx_mic, crypto->rx_mic, - sizeof(key_entry.rx_mic)); - - offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx); - timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - offset, &key_entry, - sizeof(key_entry), - timeout); - } - - /* - * Update WCID information - */ - rt2800usb_config_wcid_attr(rt2x00dev, crypto, key); - - return 0; -} - -static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags) -{ - u32 reg; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2x00usb_register_read(rt2x00dev, RX_FILTER_CFG, ®); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CRC_ERROR, - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PHY_ERROR, - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_TO_ME, - !(filter_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_VER_ERROR, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_MULTICAST, - !(filter_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BROADCAST, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_DUPLICATE, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CF_END, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_ACK, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_RTS, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, - !(filter_flags & FIF_PSPOLL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, - !(filter_flags & FIF_CONTROL)); - rt2x00usb_register_write(rt2x00dev, RX_FILTER_CFG, reg); -} - -static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, - const unsigned int flags) -{ - unsigned int beacon_base; - u32 reg; - - if (flags & CONFIG_UPDATE_TYPE) { - /* - * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); - rt2x00usb_register_write(rt2x00dev, beacon_base, 0); - - /* - * Enable synchronisation. - */ - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, conf->sync); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); - } - - if (flags & CONFIG_UPDATE_MAC) { - reg = le32_to_cpu(conf->mac[1]); - rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); - conf->mac[1] = cpu_to_le32(reg); - - rt2x00usb_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, - conf->mac, sizeof(conf->mac)); - } - - if (flags & CONFIG_UPDATE_BSSID) { - reg = le32_to_cpu(conf->bssid[1]); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 0); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 0); - conf->bssid[1] = cpu_to_le32(reg); - - rt2x00usb_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, - conf->bssid, sizeof(conf->bssid)); - } -} - -static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp) -{ - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20); - rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®); - rt2x00_set_field32(®, AUTO_RSP_CFG_BAC_ACK_POLICY, - !!erp->short_preamble); - rt2x00_set_field32(®, AUTO_RSP_CFG_AR_PREAMBLE, - !!erp->short_preamble); - rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, - erp->cts_protection ? 2 : 0); - rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, - erp->basic_rates); - rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); - - rt2x00usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, ®); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time); - rt2x00_set_field32(®, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2); - rt2x00usb_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, XIFS_TIME_CFG, ®); - rt2x00_set_field32(®, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4); - rt2x00_set_field32(®, XIFS_TIME_CFG_EIFS, erp->eifs); - rt2x00_set_field32(®, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1); - rt2x00usb_register_write(rt2x00dev, XIFS_TIME_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); -} - -static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u8 r1; - u8 r3; - - rt2800usb_bbp_read(rt2x00dev, 1, &r1); - rt2800usb_bbp_read(rt2x00dev, 3, &r3); - - /* - * Configure the TX antenna. - */ - switch ((int)ant->tx) { - case 1: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0); - break; - case 2: - rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2); - break; - case 3: - /* Do nothing */ - break; - } - - /* - * Configure the RX antenna. - */ - switch ((int)ant->rx) { - case 1: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0); - break; - case 2: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1); - break; - case 3: - rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2); - break; - } - - rt2800usb_bbp_write(rt2x00dev, 3, r3); - rt2800usb_bbp_write(rt2x00dev, 1, r1); -} - -static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u16 eeprom; - short lna_gain; - - if (libconf->rf.channel <= 14) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG); - } else if (libconf->rf.channel <= 64) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); - } else if (libconf->rf.channel <= 128) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1); - } else { - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom); - lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2); - } - - rt2x00dev->lna_gain = lna_gain; -} - -static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - if (rt2x00dev->default_ant.tx == 1) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); - - if (rt2x00dev->default_ant.rx == 1) { - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - } else if (rt2x00dev->default_ant.rx == 2) - rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1); - - if (rf->channel > 14) { - /* - * When TX power is below 0, we should increase it by 7 to - * make it a positive value (Minumum value is -7). - * However this means that values between 0 and 7 have - * double meaning, and we should set a 7DBm boost flag. - */ - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, - (info->tx_power1 >= 0)); - - if (info->tx_power1 < 0) - info->tx_power1 += 7; - - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power1)); - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, - (info->tx_power2 >= 0)); - - if (info->tx_power2 < 0) - info->tx_power2 += 7; - - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power2)); - } else { - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power2)); - } - - rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); - - rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); - rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); - rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); - rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); - rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); - rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt2800usb_rf_write(rt2x00dev, 1, rf->rf1); - rt2800usb_rf_write(rt2x00dev, 2, rf->rf2); - rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt2800usb_rf_write(rt2x00dev, 4, rf->rf4); -} - -static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u8 rfcsr; - - rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1); - rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3); - - rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2); - rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr); - - rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr); - - rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); - rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); - - rt2800usb_rfcsr_write(rt2x00dev, 24, - rt2x00dev->calibration[conf_is_ht40(conf)]); - - rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1); - rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr); -} - -static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, - struct rf_channel *rf, - struct channel_info *info) -{ - u32 reg; - unsigned int tx_pin; - u8 bbp; - - if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) - rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info); - else - rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info); - - /* - * Change BBP settings - */ - rt2800usb_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); - rt2800usb_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); - rt2800usb_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); - rt2800usb_bbp_write(rt2x00dev, 86, 0); - - if (rf->channel <= 14) { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { - rt2800usb_bbp_write(rt2x00dev, 82, 0x62); - rt2800usb_bbp_write(rt2x00dev, 75, 0x46); - } else { - rt2800usb_bbp_write(rt2x00dev, 82, 0x84); - rt2800usb_bbp_write(rt2x00dev, 75, 0x50); - } - } else { - rt2800usb_bbp_write(rt2x00dev, 82, 0xf2); - - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) - rt2800usb_bbp_write(rt2x00dev, 75, 0x46); - else - rt2800usb_bbp_write(rt2x00dev, 75, 0x50); - } - - rt2x00usb_register_read(rt2x00dev, TX_BAND_CFG, ®); - rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); - rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); - rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); - rt2x00usb_register_write(rt2x00dev, TX_BAND_CFG, reg); - - tx_pin = 0; - - /* Turn on unused PA or LNA when not using 1T or 1R */ - if (rt2x00dev->default_ant.tx != 1) { - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1); - } - - /* Turn on unused PA or LNA when not using 1T or 1R */ - if (rt2x00dev->default_ant.rx != 1) { - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1); - } - - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14); - - rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - - rt2800usb_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); - rt2800usb_bbp_write(rt2x00dev, 4, bbp); - - rt2800usb_bbp_read(rt2x00dev, 3, &bbp); - rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); - rt2800usb_bbp_write(rt2x00dev, 3, bbp); - - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { - if (conf_is_ht40(conf)) { - rt2800usb_bbp_write(rt2x00dev, 69, 0x1a); - rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); - rt2800usb_bbp_write(rt2x00dev, 73, 0x16); - } else { - rt2800usb_bbp_write(rt2x00dev, 69, 0x16); - rt2800usb_bbp_write(rt2x00dev, 70, 0x08); - rt2800usb_bbp_write(rt2x00dev, 73, 0x11); - } - } - - msleep(1); -} - -static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - u32 reg; - u32 value = TXPOWER_G_TO_DEV(txpower); - u8 r1; - - rt2800usb_bbp_read(rt2x00dev, 1, &r1); - rt2x00_set_field8(®, BBP1_TX_POWER, 0); - rt2800usb_bbp_write(rt2x00dev, 1, r1); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_0, ®); - rt2x00_set_field32(®, TX_PWR_CFG_0_1MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_2MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_55MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_11MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_6MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_9MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_12MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_0_18MBS, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_0, reg); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_1, ®); - rt2x00_set_field32(®, TX_PWR_CFG_1_24MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_36MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_48MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_54MBS, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS0, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS1, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS2, value); - rt2x00_set_field32(®, TX_PWR_CFG_1_MCS3, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_1, reg); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_2, ®); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS4, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS5, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS6, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS7, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS8, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS9, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS10, value); - rt2x00_set_field32(®, TX_PWR_CFG_2_MCS11, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_2, reg); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_3, ®); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS12, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS13, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS14, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_MCS15, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN1, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN2, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN3, value); - rt2x00_set_field32(®, TX_PWR_CFG_3_UKNOWN4, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_3, reg); - - rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_4, ®); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN5, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN6, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN7, value); - rt2x00_set_field32(®, TX_PWR_CFG_4_UKNOWN8, value); - rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_4, reg); -} - -static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TX_RTY_CFG, ®); - rt2x00_set_field32(®, TX_RTY_CFG_SHORT_RTY_LIMIT, - libconf->conf->short_frame_max_tx_count); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_LIMIT, - libconf->conf->long_frame_max_tx_count); - rt2x00_set_field32(®, TX_RTY_CFG_LONG_RTY_THRE, 2000); - rt2x00_set_field32(®, TX_RTY_CFG_NON_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_AGG_RTY_MODE, 0); - rt2x00_set_field32(®, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1); - rt2x00usb_register_write(rt2x00dev, TX_RTY_CFG, reg); -} - -static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - enum dev_state state = - (libconf->conf->flags & IEEE80211_CONF_PS) ? - STATE_SLEEP : STATE_AWAKE; - u32 reg; - - if (state == STATE_SLEEP) { - rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0); - - rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, - libconf->conf->listen_interval - 1); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 1); - rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - } else { - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - - rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, ®); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0); - rt2x00_set_field32(®, AUTOWAKEUP_CFG_AUTOWAKE, 0); - rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg); - } -} - -static void rt2800usb_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -{ - /* Always recalculate LNA gain before changing configuration */ - rt2800usb_config_lna_gain(rt2x00dev, libconf); - - if (flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt2800usb_config_channel(rt2x00dev, libconf->conf, - &libconf->rf, &libconf->channel); - if (flags & IEEE80211_CONF_CHANGE_POWER) - rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) - rt2800usb_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_PS) - rt2800usb_config_ps(rt2x00dev, libconf); -} - -/* - * Link tuning - */ -static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, ®); - qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR); -} - -static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev) -{ - if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { - if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) - return 0x1c + (2 * rt2x00dev->lna_gain); - else - return 0x2e + rt2x00dev->lna_gain; - } - - if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) - return 0x32 + (rt2x00dev->lna_gain * 5) / 3; - else - return 0x3a + (rt2x00dev->lna_gain * 5) / 3; -} - -static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, u8 vgc_level) -{ - if (qual->vgc_level != vgc_level) { - rt2800usb_bbp_write(rt2x00dev, 66, vgc_level); - qual->vgc_level = vgc_level; - qual->vgc_level_reg = vgc_level; - } -} - -static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - rt2800usb_set_vgc(rt2x00dev, qual, - rt2800usb_get_default_vgc(rt2x00dev)); -} - -static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count) -{ - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) - return; - - /* - * When RSSI is better then -80 increase VGC level with 0x10 - */ - rt2800usb_set_vgc(rt2x00dev, qual, - rt2800usb_get_default_vgc(rt2x00dev) + - ((qual->rssi > -80) * 0x10)); -} - -/* * Firmware functions */ static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) @@ -1172,7 +153,7 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, * Wait for stable hardware. */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); if (reg && reg != ~0) break; msleep(1); @@ -1192,8 +173,8 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, data + offset, length, REGISTER_TIMEOUT32(length)); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); /* * Send firmware request to device to load firmware, @@ -1208,18 +189,18 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, } msleep(10); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); /* * Send signal to firmware during boot time. */ - rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); + rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0); if ((chipset == 0x3070) || (chipset == 0x3071) || (chipset == 0x3572)) { udelay(200); - rt2800usb_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); + rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); udelay(10); } @@ -1227,7 +208,7 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, * Wait for device to stabilize. */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®); if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY)) break; msleep(1); @@ -1241,536 +222,14 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, /* * Initialize firmware. */ - rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); msleep(1); return 0; } /* - * Initialization functions. - */ -static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - /* - * Wait untill BBP and RF are ready. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); - if (reg && reg != ~0) - break; - msleep(1); - } - - if (i == REGISTER_BUSY_COUNT) { - ERROR(rt2x00dev, "Unstable hardware.\n"); - return -EBUSY; - } - - rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, ®); - rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000); - - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000); - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0, - USB_MODE_RESET, REGISTER_TIMEOUT); - - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); - - rt2x00usb_register_read(rt2x00dev, BCN_OFFSET0, ®); - rt2x00_set_field32(®, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */ - rt2x00_set_field32(®, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */ - rt2x00usb_register_write(rt2x00dev, BCN_OFFSET0, reg); - - rt2x00usb_register_read(rt2x00dev, BCN_OFFSET1, ®); - rt2x00_set_field32(®, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */ - rt2x00_set_field32(®, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */ - rt2x00usb_register_write(rt2x00dev, BCN_OFFSET1, reg); - - rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f); - rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003); - - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000); - - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_INTERVAL, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TSF_SYNC, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2x00_set_field32(®, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); - - if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400); - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000); - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); - } else { - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); - rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); - } - - rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, ®); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32); - rt2x00_set_field32(®, TX_LINK_CFG_MFB_ENABLE, 0); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_MRQ_EN, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_RDG_EN, 0); - rt2x00_set_field32(®, TX_LINK_CFG_TX_CF_ACK_EN, 1); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFB, 0); - rt2x00_set_field32(®, TX_LINK_CFG_REMOTE_MFS, 0); - rt2x00usb_register_write(rt2x00dev, TX_LINK_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, ®); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9); - rt2x00_set_field32(®, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10); - rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, ®); - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE); - if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION && - rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION) - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 2); - else - rt2x00_set_field32(®, MAX_LEN_CFG_MAX_PSDU, 1); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_PSDU, 0); - rt2x00_set_field32(®, MAX_LEN_CFG_MIN_MPDU, 0); - rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f); - - rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, ®); - rt2x00_set_field32(®, AUTO_RSP_CFG_AUTORESPONDER, 1); - rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MMODE, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_CTS_40_MREF, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_DUAL_CTS_EN, 0); - rt2x00_set_field32(®, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0); - rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_RATE, 8); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, CCK_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_RATE, 8); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, OFDM_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_RATE, 0x4004); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, MM20_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0); - rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_RATE, 0x4084); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, MM40_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_RATE, 0x4004); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, GF20_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0); - rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_RATE, 0x4084); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_CTRL, 0); - rt2x00_set_field32(®, GF40_PROT_CFG_PROTECT_NAV, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1); - rt2x00_set_field32(®, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1); - rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006); - - rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_BIG_ENDIAN, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_HDR_SEG_LEN, 0); - rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f); - rt2x00usb_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002); - - rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®); - rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, - IEEE80211_MAX_RTS_THRESHOLD); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_FBK_EN, 0); - rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg); - - rt2x00usb_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca); - rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); - - /* - * ASIC will keep garbage value after boot, clear encryption keys. - */ - for (i = 0; i < 4; i++) - rt2x00usb_register_write(rt2x00dev, - SHARED_KEY_MODE_ENTRY(i), 0); - - for (i = 0; i < 256; i++) { - u32 wcid[2] = { 0xffffffff, 0x00ffffff }; - rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i), - wcid, sizeof(wcid)); - - rt2x00usb_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1); - rt2x00usb_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0); - } - - /* - * Clear all beacons - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE4, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE5, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE6, 0); - rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE7, 0); - - rt2x00usb_register_read(rt2x00dev, USB_CYC_CFG, ®); - rt2x00_set_field32(®, USB_CYC_CFG_CLOCK_CYCLE, 30); - rt2x00usb_register_write(rt2x00dev, USB_CYC_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG0, ®); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS0FBK, 0); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS1FBK, 0); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS2FBK, 1); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS3FBK, 2); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS4FBK, 3); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS5FBK, 4); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS6FBK, 5); - rt2x00_set_field32(®, HT_FBK_CFG0_HTMCS7FBK, 6); - rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG0, reg); - - rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG1, ®); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS8FBK, 8); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS9FBK, 8); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS10FBK, 9); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS11FBK, 10); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS12FBK, 11); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS13FBK, 12); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS14FBK, 13); - rt2x00_set_field32(®, HT_FBK_CFG1_HTMCS15FBK, 14); - rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG1, reg); - - rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, ®); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS0FBK, 8); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS1FBK, 8); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS2FBK, 9); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS3FBK, 10); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS4FBK, 11); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS5FBK, 12); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS6FBK, 13); - rt2x00_set_field32(®, LG_FBK_CFG0_OFDMMCS7FBK, 14); - rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG0, reg); - - rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG1, ®); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS0FBK, 0); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS1FBK, 0); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS2FBK, 1); - rt2x00_set_field32(®, LG_FBK_CFG0_CCKMCS3FBK, 2); - rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG1, reg); - - /* - * We must clear the error counters. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, ®); - rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, ®); - rt2x00usb_register_read(rt2x00dev, RX_STA_CNT2, ®); - rt2x00usb_register_read(rt2x00dev, TX_STA_CNT0, ®); - rt2x00usb_register_read(rt2x00dev, TX_STA_CNT1, ®); - rt2x00usb_register_read(rt2x00dev, TX_STA_CNT2, ®); - - return 0; -} - -static int rt2800usb_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u32 reg; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, MAC_STATUS_CFG, ®); - if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY)) - return 0; - - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n"); - return -EACCES; -} - -static int rt2800usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u8 value; - - /* - * BBP was enabled after firmware was loaded, - * but we need to reactivate it now. - */ - rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0); - rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - msleep(1); - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800usb_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - return 0; - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); - return -EACCES; -} - -static int rt2800usb_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - if (unlikely(rt2800usb_wait_bbp_rf_ready(rt2x00dev) || - rt2800usb_wait_bbp_ready(rt2x00dev))) - return -EACCES; - - rt2800usb_bbp_write(rt2x00dev, 65, 0x2c); - rt2800usb_bbp_write(rt2x00dev, 66, 0x38); - rt2800usb_bbp_write(rt2x00dev, 69, 0x12); - rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); - rt2800usb_bbp_write(rt2x00dev, 73, 0x10); - rt2800usb_bbp_write(rt2x00dev, 81, 0x37); - rt2800usb_bbp_write(rt2x00dev, 82, 0x62); - rt2800usb_bbp_write(rt2x00dev, 83, 0x6a); - rt2800usb_bbp_write(rt2x00dev, 84, 0x99); - rt2800usb_bbp_write(rt2x00dev, 86, 0x00); - rt2800usb_bbp_write(rt2x00dev, 91, 0x04); - rt2800usb_bbp_write(rt2x00dev, 92, 0x00); - rt2800usb_bbp_write(rt2x00dev, 103, 0x00); - rt2800usb_bbp_write(rt2x00dev, 105, 0x05); - - if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) { - rt2800usb_bbp_write(rt2x00dev, 69, 0x16); - rt2800usb_bbp_write(rt2x00dev, 73, 0x12); - } - - if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) { - rt2800usb_bbp_write(rt2x00dev, 84, 0x19); - } - - if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) { - rt2800usb_bbp_write(rt2x00dev, 70, 0x0a); - rt2800usb_bbp_write(rt2x00dev, 84, 0x99); - rt2800usb_bbp_write(rt2x00dev, 105, 0x05); - } - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - rt2800usb_bbp_write(rt2x00dev, reg_id, value); - } - } - - return 0; -} - -static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev, - bool bw40, u8 rfcsr24, u8 filter_target) -{ - unsigned int i; - u8 bbp; - u8 rfcsr; - u8 passband; - u8 stopband; - u8 overtuned = 0; - - rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); - - rt2800usb_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40); - rt2800usb_bbp_write(rt2x00dev, 4, bbp); - - rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1); - rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); - - /* - * Set power & frequency of passband test tone - */ - rt2800usb_bbp_write(rt2x00dev, 24, 0); - - for (i = 0; i < 100; i++) { - rt2800usb_bbp_write(rt2x00dev, 25, 0x90); - msleep(1); - - rt2800usb_bbp_read(rt2x00dev, 55, &passband); - if (passband) - break; - } - - /* - * Set power & frequency of stopband test tone - */ - rt2800usb_bbp_write(rt2x00dev, 24, 0x06); - - for (i = 0; i < 100; i++) { - rt2800usb_bbp_write(rt2x00dev, 25, 0x90); - msleep(1); - - rt2800usb_bbp_read(rt2x00dev, 55, &stopband); - - if ((passband - stopband) <= filter_target) { - rfcsr24++; - overtuned += ((passband - stopband) == filter_target); - } else - break; - - rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); - } - - rfcsr24 -= !!overtuned; - - rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24); - return rfcsr24; -} - -static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev) -{ - u8 rfcsr; - u8 bbp; - - if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION) - return 0; - - /* - * Init RF calibration. - */ - rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1); - rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); - msleep(1); - rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0); - rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr); - - rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40); - rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03); - rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02); - rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70); - rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f); - rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71); - rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21); - rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b); - rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90); - rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58); - rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3); - rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92); - rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c); - rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02); - rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba); - rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb); - rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16); - rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01); - rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03); - rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f); - - /* - * Set RX Filter calibration for 20MHz and 40MHz - */ - rt2x00dev->calibration[0] = - rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16); - rt2x00dev->calibration[1] = - rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19); - - /* - * Set back to initial state - */ - rt2800usb_bbp_write(rt2x00dev, 24, 0); - - rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0); - rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr); - - /* - * set BBP back to BW20 - */ - rt2800usb_bbp_read(rt2x00dev, 4, &bbp); - rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0); - rt2800usb_bbp_write(rt2x00dev, 4, bbp); - - return 0; -} - -/* * Device state switch handlers. */ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev, @@ -1778,11 +237,11 @@ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, (state == STATE_RADIO_RX_ON) || (state == STATE_RADIO_RX_ON_LINK)); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); } static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) @@ -1791,7 +250,7 @@ static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) u32 reg; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) && !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY)) return 0; @@ -1812,25 +271,25 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) * Initialize all registers. */ if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) || - rt2800usb_init_registers(rt2x00dev) || - rt2800usb_init_bbp(rt2x00dev) || - rt2800usb_init_rfcsr(rt2x00dev))) + rt2800_init_registers(rt2x00dev) || + rt2800_init_bbp(rt2x00dev) || + rt2800_init_rfcsr(rt2x00dev))) return -EIO; - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); udelay(50); - rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); - rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, ®); + rt2800_register_read(rt2x00dev, USB_DMA_CFG, ®); rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0); /* Don't use bulk in aggregation when working with USB 1.1 */ rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, @@ -1844,26 +303,26 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) ((RX_ENTRIES * DATA_FRAME_SIZE) / 1024) - 3); rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_EN, 1); rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1); - rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg); + rt2800_register_write(rt2x00dev, USB_DMA_CFG, reg); - rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); /* * Initialize LED control */ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); - rt2800usb_mcu_request(rt2x00dev, MCU_LED_1, 0xff, + rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff, word & 0xff, (word >> 8) & 0xff); rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); - rt2800usb_mcu_request(rt2x00dev, MCU_LED_2, 0xff, + rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff, word & 0xff, (word >> 8) & 0xff); rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); - rt2800usb_mcu_request(rt2x00dev, MCU_LED_3, 0xff, + rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff, word & 0xff, (word >> 8) & 0xff); return 0; @@ -1873,14 +332,14 @@ static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; - rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); - rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0); - rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0); - rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, 0); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); + rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); /* Wait for DMA, ignore error */ rt2800usb_wait_wpdma_ready(rt2x00dev); @@ -1892,9 +351,9 @@ static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) { if (state == STATE_AWAKE) - rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); + rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0); else - rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); + rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); return 0; } @@ -2048,9 +507,9 @@ static void rt2800usb_write_beacon(struct queue_entry *entry) * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 0); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); /* * Write entire beacon with descriptor to register. @@ -2093,12 +552,12 @@ static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, return; } - rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, ®); + rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®); if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) { rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1); rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1); rt2x00_set_field32(®, BCN_TIME_CFG_BEACON_GEN, 1); - rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg); + rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg); } } @@ -2124,7 +583,7 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, */ memcpy(skbdesc->desc, rxd, skbdesc->desc_len); rxd = (__le32 *)skbdesc->desc; - rxwi = &rxd[RXD_DESC_SIZE / sizeof(__le32)]; + rxwi = &rxd[RXINFO_DESC_SIZE / sizeof(__le32)]; /* * It is now safe to read the descriptor on all architectures. @@ -2326,7 +785,7 @@ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) * Identify RF chipset. */ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, RT2870, value, reg); /* @@ -2385,9 +844,9 @@ static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev) * Store led settings, for correct led behaviour. */ #ifdef CONFIG_RT2X00_LIB_LEDS - rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); - rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); + rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg); @@ -2600,10 +1059,25 @@ static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) return 0; } +static const struct rt2800_ops rt2800usb_rt2800_ops = { + .register_read = rt2x00usb_register_read, + .register_write = rt2x00usb_register_write, + .register_write_lock = rt2x00usb_register_write_lock, + + .register_multiread = rt2x00usb_register_multiread, + .register_multiwrite = rt2x00usb_register_multiwrite, + + .regbusy_read = rt2x00usb_regbusy_read, +}; + static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_USB); + + rt2x00dev->priv = (void *)&rt2800usb_rt2800_ops; + /* * Allocate eeprom data. */ @@ -2645,162 +1119,6 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) return 0; } -/* - * IEEE80211 stack callback functions. - */ -static void rt2800usb_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, - u32 *iv32, u16 *iv16) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct mac_iveiv_entry iveiv_entry; - u32 offset; - - offset = MAC_IVEIV_ENTRY(hw_key_idx); - rt2x00usb_register_multiread(rt2x00dev, offset, - &iveiv_entry, sizeof(iveiv_entry)); - - memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16)); - memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32)); -} - -static int rt2800usb_set_rts_threshold(struct ieee80211_hw *hw, u32 value) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD); - - rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, ®); - rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, value); - rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, ®); - rt2x00_set_field32(®, CCK_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, ®); - rt2x00_set_field32(®, OFDM_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, ®); - rt2x00_set_field32(®, MM20_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, ®); - rt2x00_set_field32(®, MM40_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, ®); - rt2x00_set_field32(®, GF20_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, ®); - rt2x00_set_field32(®, GF40_PROT_CFG_RTS_TH_EN, enabled); - rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg); - - return 0; -} - -static int rt2800usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, - const struct ieee80211_tx_queue_params *params) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_queue *queue; - struct rt2x00_field32 field; - int retval; - u32 reg; - u32 offset; - - /* - * First pass the configuration through rt2x00lib, that will - * update the queue settings and validate the input. After that - * we are free to update the registers based on the value - * in the queue parameter. - */ - retval = rt2x00mac_conf_tx(hw, queue_idx, params); - if (retval) - return retval; - - /* - * We only need to perform additional register initialization - * for WMM queues/ - */ - if (queue_idx >= 4) - return 0; - - queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); - - /* Update WMM TXOP register */ - offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2))); - field.bit_offset = (queue_idx & 1) * 16; - field.bit_mask = 0xffff << field.bit_offset; - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, field, queue->txop); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - /* Update WMM registers */ - field.bit_offset = queue_idx * 4; - field.bit_mask = 0xf << field.bit_offset; - - rt2x00usb_register_read(rt2x00dev, WMM_AIFSN_CFG, ®); - rt2x00_set_field32(®, field, queue->aifs); - rt2x00usb_register_write(rt2x00dev, WMM_AIFSN_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, WMM_CWMIN_CFG, ®); - rt2x00_set_field32(®, field, queue->cw_min); - rt2x00usb_register_write(rt2x00dev, WMM_CWMIN_CFG, reg); - - rt2x00usb_register_read(rt2x00dev, WMM_CWMAX_CFG, ®); - rt2x00_set_field32(®, field, queue->cw_max); - rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg); - - /* Update EDCA registers */ - offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx); - - rt2x00usb_register_read(rt2x00dev, offset, ®); - rt2x00_set_field32(®, EDCA_AC0_CFG_TX_OP, queue->txop); - rt2x00_set_field32(®, EDCA_AC0_CFG_AIFSN, queue->aifs); - rt2x00_set_field32(®, EDCA_AC0_CFG_CWMIN, queue->cw_min); - rt2x00_set_field32(®, EDCA_AC0_CFG_CWMAX, queue->cw_max); - rt2x00usb_register_write(rt2x00dev, offset, reg); - - return 0; -} - -static u64 rt2800usb_get_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW1, ®); - tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32; - rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW0, ®); - tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD); - - return tsf; -} - -static const struct ieee80211_ops rt2800usb_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .configure_filter = rt2x00mac_configure_filter, - .set_tim = rt2x00mac_set_tim, - .set_key = rt2x00mac_set_key, - .get_stats = rt2x00mac_get_stats, - .get_tkip_seq = rt2800usb_get_tkip_seq, - .set_rts_threshold = rt2800usb_set_rts_threshold, - .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2800usb_conf_tx, - .get_tx_stats = rt2x00mac_get_tx_stats, - .get_tsf = rt2800usb_get_tsf, - .rfkill_poll = rt2x00mac_rfkill_poll, -}; - static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .probe_hw = rt2800usb_probe_hw, .get_firmware_name = rt2800usb_get_firmware_name, @@ -2810,10 +1128,10 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .uninitialize = rt2x00usb_uninitialize, .clear_entry = rt2x00usb_clear_entry, .set_device_state = rt2800usb_set_device_state, - .rfkill_poll = rt2800usb_rfkill_poll, - .link_stats = rt2800usb_link_stats, - .reset_tuner = rt2800usb_reset_tuner, - .link_tuner = rt2800usb_link_tuner, + .rfkill_poll = rt2800_rfkill_poll, + .link_stats = rt2800_link_stats, + .reset_tuner = rt2800_reset_tuner, + .link_tuner = rt2800_link_tuner, .write_tx_desc = rt2800usb_write_tx_desc, .write_tx_data = rt2x00usb_write_tx_data, .write_beacon = rt2800usb_write_beacon, @@ -2821,19 +1139,19 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .kick_tx_queue = rt2800usb_kick_tx_queue, .kill_tx_queue = rt2x00usb_kill_tx_queue, .fill_rxdone = rt2800usb_fill_rxdone, - .config_shared_key = rt2800usb_config_shared_key, - .config_pairwise_key = rt2800usb_config_pairwise_key, - .config_filter = rt2800usb_config_filter, - .config_intf = rt2800usb_config_intf, - .config_erp = rt2800usb_config_erp, - .config_ant = rt2800usb_config_ant, - .config = rt2800usb_config, + .config_shared_key = rt2800_config_shared_key, + .config_pairwise_key = rt2800_config_pairwise_key, + .config_filter = rt2800_config_filter, + .config_intf = rt2800_config_intf, + .config_erp = rt2800_config_erp, + .config_ant = rt2800_config_ant, + .config = rt2800_config, }; static const struct data_queue_desc rt2800usb_queue_rx = { .entry_num = RX_ENTRIES, .data_size = AGGREGATION_SIZE, - .desc_size = RXD_DESC_SIZE + RXWI_DESC_SIZE, + .desc_size = RXINFO_DESC_SIZE + RXWI_DESC_SIZE, .priv_size = sizeof(struct queue_entry_priv_usb), }; @@ -2862,9 +1180,9 @@ static const struct rt2x00_ops rt2800usb_ops = { .tx = &rt2800usb_queue_tx, .bcn = &rt2800usb_queue_bcn, .lib = &rt2800usb_rt2x00_ops, - .hw = &rt2800usb_mac80211_ops, + .hw = &rt2800_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2800usb_rt2x00debug, + .debugfs = &rt2800_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h index 4d9991c9a51c..c9d7d40ee5fb 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.h +++ b/drivers/net/wireless/rt2x00/rt2800usb.h @@ -28,288 +28,10 @@ #define RT2800USB_H /* - * RF chip defines. - * - * RF2820 2.4G 2T3R - * RF2850 2.4G/5G 2T3R - * RF2720 2.4G 1T2R - * RF2750 2.4G/5G 1T2R - * RF3020 2.4G 1T1R - * RF2020 2.4G B/G - * RF3021 2.4G 1T2R - * RF3022 2.4G 2T2R - * RF3052 2.4G 2T2R - */ -#define RF2820 0x0001 -#define RF2850 0x0002 -#define RF2720 0x0003 -#define RF2750 0x0004 -#define RF3020 0x0005 -#define RF2020 0x0006 -#define RF3021 0x0007 -#define RF3022 0x0008 -#define RF3052 0x0009 - -/* - * RT2870 version - */ -#define RT2860C_VERSION 0x28600100 -#define RT2860D_VERSION 0x28600101 -#define RT2880E_VERSION 0x28720200 -#define RT2883_VERSION 0x28830300 -#define RT3070_VERSION 0x30700200 - -/* - * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. - */ -#define DEFAULT_RSSI_OFFSET 120 /* FIXME */ - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x1000 -#define CSR_REG_SIZE 0x0800 -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0110 -#define BBP_BASE 0x0000 -#define BBP_SIZE 0x0080 -#define RF_BASE 0x0004 -#define RF_SIZE 0x0010 - -/* - * Number of TX queues. - */ -#define NUM_TX_QUEUES 4 - -/* * USB registers. */ /* - * HOST-MCU shared memory - */ -#define HOST_CMD_CSR 0x0404 -#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff) - -/* - * INT_SOURCE_CSR: Interrupt source register. - * Write one to clear corresponding bit. - * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c - */ -#define INT_SOURCE_CSR 0x0200 -#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001) -#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002) -#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004) -#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008) -#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010) -#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020) -#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040) -#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080) -#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100) -#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200) -#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400) -#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800) -#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000) -#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000) -#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000) -#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000) -#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000) -#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000) - -/* - * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. - */ -#define INT_MASK_CSR 0x0204 -#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001) -#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002) -#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004) -#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008) -#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010) -#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020) -#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040) -#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080) -#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100) -#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200) -#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400) -#define INT_MASK_CSR_TBTT FIELD32(0x00000800) -#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000) -#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000) -#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000) -#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000) -#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000) -#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000) - -/* - * WPDMA_GLO_CFG - */ -#define WPDMA_GLO_CFG 0x0208 -#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001) -#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002) -#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004) -#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008) -#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030) -#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040) -#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080) -#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00) -#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000) - -/* - * WPDMA_RST_IDX - */ -#define WPDMA_RST_IDX 0x020c -#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001) -#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002) -#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004) -#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008) -#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010) -#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020) -#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000) - -/* - * DELAY_INT_CFG - */ -#define DELAY_INT_CFG 0x0210 -#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff) -#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00) -#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000) -#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000) -#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000) -#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000) - -/* - * WMM_AIFSN_CFG: Aifsn for each EDCA AC - * AIFSN0: AC_BE - * AIFSN1: AC_BK - * AIFSN1: AC_VI - * AIFSN1: AC_VO - */ -#define WMM_AIFSN_CFG 0x0214 -#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f) -#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0) -#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00) -#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000) - -/* - * WMM_CWMIN_CSR: CWmin for each EDCA AC - * CWMIN0: AC_BE - * CWMIN1: AC_BK - * CWMIN1: AC_VI - * CWMIN1: AC_VO - */ -#define WMM_CWMIN_CFG 0x0218 -#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f) -#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0) -#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00) -#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000) - -/* - * WMM_CWMAX_CSR: CWmax for each EDCA AC - * CWMAX0: AC_BE - * CWMAX1: AC_BK - * CWMAX1: AC_VI - * CWMAX1: AC_VO - */ -#define WMM_CWMAX_CFG 0x021c -#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f) -#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0) -#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00) -#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000) - -/* - * AC_TXOP0: AC_BK/AC_BE TXOP register - * AC0TXOP: AC_BK in unit of 32us - * AC1TXOP: AC_BE in unit of 32us - */ -#define WMM_TXOP0_CFG 0x0220 -#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff) -#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000) - -/* - * AC_TXOP1: AC_VO/AC_VI TXOP register - * AC2TXOP: AC_VI in unit of 32us - * AC3TXOP: AC_VO in unit of 32us - */ -#define WMM_TXOP1_CFG 0x0224 -#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff) -#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000) - -/* - * GPIO_CTRL_CFG: - */ -#define GPIO_CTRL_CFG 0x0228 -#define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001) -#define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002) -#define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004) -#define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008) -#define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010) -#define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020) -#define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040) -#define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080) -#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00000100) - -/* - * MCU_CMD_CFG - */ -#define MCU_CMD_CFG 0x022c - -/* - * AC_BK register offsets - */ -#define TX_BASE_PTR0 0x0230 -#define TX_MAX_CNT0 0x0234 -#define TX_CTX_IDX0 0x0238 -#define TX_DTX_IDX0 0x023c - -/* - * AC_BE register offsets - */ -#define TX_BASE_PTR1 0x0240 -#define TX_MAX_CNT1 0x0244 -#define TX_CTX_IDX1 0x0248 -#define TX_DTX_IDX1 0x024c - -/* - * AC_VI register offsets - */ -#define TX_BASE_PTR2 0x0250 -#define TX_MAX_CNT2 0x0254 -#define TX_CTX_IDX2 0x0258 -#define TX_DTX_IDX2 0x025c - -/* - * AC_VO register offsets - */ -#define TX_BASE_PTR3 0x0260 -#define TX_MAX_CNT3 0x0264 -#define TX_CTX_IDX3 0x0268 -#define TX_DTX_IDX3 0x026c - -/* - * HCCA register offsets - */ -#define TX_BASE_PTR4 0x0270 -#define TX_MAX_CNT4 0x0274 -#define TX_CTX_IDX4 0x0278 -#define TX_DTX_IDX4 0x027c - -/* - * MGMT register offsets - */ -#define TX_BASE_PTR5 0x0280 -#define TX_MAX_CNT5 0x0284 -#define TX_CTX_IDX5 0x0288 -#define TX_DTX_IDX5 0x028c - -/* - * RX register offsets - */ -#define RX_BASE_PTR 0x0290 -#define RX_MAX_CNT 0x0294 -#define RX_CRX_IDX 0x0298 -#define RX_DRX_IDX 0x029c - -/* * USB_DMA_CFG * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns. * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes. @@ -343,1448 +65,16 @@ #define USB_CYC_CFG_CLOCK_CYCLE FIELD32(0x000000ff) /* - * PBF_SYS_CTRL - * HOST_RAM_WRITE: enable Host program ram write selection - */ -#define PBF_SYS_CTRL 0x0400 -#define PBF_SYS_CTRL_READY FIELD32(0x00000080) -#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000) - -/* - * PBF registers - * Most are for debug. Driver doesn't touch PBF register. - */ -#define PBF_CFG 0x0408 -#define PBF_MAX_PCNT 0x040c -#define PBF_CTRL 0x0410 -#define PBF_INT_STA 0x0414 -#define PBF_INT_ENA 0x0418 - -/* - * BCN_OFFSET0: - */ -#define BCN_OFFSET0 0x042c -#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff) -#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00) -#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000) -#define BCN_OFFSET0_BCN3 FIELD32(0xff000000) - -/* - * BCN_OFFSET1: - */ -#define BCN_OFFSET1 0x0430 -#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff) -#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00) -#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000) -#define BCN_OFFSET1_BCN7 FIELD32(0xff000000) - -/* - * PBF registers - * Most are for debug. Driver doesn't touch PBF register. - */ -#define TXRXQ_PCNT 0x0438 -#define PBF_DBG 0x043c - -/* - * RF registers - */ -#define RF_CSR_CFG 0x0500 -#define RF_CSR_CFG_DATA FIELD32(0x000000ff) -#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00) -#define RF_CSR_CFG_WRITE FIELD32(0x00010000) -#define RF_CSR_CFG_BUSY FIELD32(0x00020000) - -/* - * MAC Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * MAC_CSR0: ASIC revision number. - * ASIC_REV: 0 - * ASIC_VER: 2870 - */ -#define MAC_CSR0 0x1000 -#define MAC_CSR0_ASIC_REV FIELD32(0x0000ffff) -#define MAC_CSR0_ASIC_VER FIELD32(0xffff0000) - -/* - * MAC_SYS_CTRL: - */ -#define MAC_SYS_CTRL 0x1004 -#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001) -#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002) -#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004) -#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008) -#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010) -#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020) -#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040) -#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080) - -/* - * MAC_ADDR_DW0: STA MAC register 0 - */ -#define MAC_ADDR_DW0 0x1008 -#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff) -#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00) -#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000) -#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000) - -/* - * MAC_ADDR_DW1: STA MAC register 1 - * UNICAST_TO_ME_MASK: - * Used to mask off bits from byte 5 of the MAC address - * to determine the UNICAST_TO_ME bit for RX frames. - * The full mask is complemented by BSS_ID_MASK: - * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK - */ -#define MAC_ADDR_DW1 0x100c -#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff) -#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00) -#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) - -/* - * MAC_BSSID_DW0: BSSID register 0 - */ -#define MAC_BSSID_DW0 0x1010 -#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff) -#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00) -#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000) -#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000) - -/* - * MAC_BSSID_DW1: BSSID register 1 - * BSS_ID_MASK: - * 0: 1-BSSID mode (BSS index = 0) - * 1: 2-BSSID mode (BSS index: Byte5, bit 0) - * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1) - * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2) - * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the - * BSSID. This will make sure that those bits will be ignored - * when determining the MY_BSS of RX frames. - */ -#define MAC_BSSID_DW1 0x1014 -#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff) -#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00) -#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000) -#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000) - -/* - * MAX_LEN_CFG: Maximum frame length register. - * MAX_MPDU: rt2860b max 16k bytes - * MAX_PSDU: Maximum PSDU length - * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 - */ -#define MAX_LEN_CFG 0x1018 -#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff) -#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000) -#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000) -#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000) - -/* - * BBP_CSR_CFG: BBP serial control register - * VALUE: Register value to program into BBP - * REG_NUM: Selected BBP register - * READ_CONTROL: 0 write BBP, 1 read BBP - * BUSY: ASIC is busy executing BBP commands - * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks - * BBP_RW_MODE: 0 serial, 1 paralell - */ -#define BBP_CSR_CFG 0x101c -#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff) -#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00) -#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000) -#define BBP_CSR_CFG_BUSY FIELD32(0x00020000) -#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000) -#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000) - -/* - * RF_CSR_CFG0: RF control register - * REGID_AND_VALUE: Register value to program into RF - * BITWIDTH: Selected RF register - * STANDBYMODE: 0 high when standby, 1 low when standby - * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate - * BUSY: ASIC is busy executing RF commands - */ -#define RF_CSR_CFG0 0x1020 -#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff) -#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000) -#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff) -#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000) -#define RF_CSR_CFG0_SEL FIELD32(0x40000000) -#define RF_CSR_CFG0_BUSY FIELD32(0x80000000) - -/* - * RF_CSR_CFG1: RF control register - * REGID_AND_VALUE: Register value to program into RF - * RFGAP: Gap between BB_CONTROL_RF and RF_LE - * 0: 3 system clock cycle (37.5usec) - * 1: 5 system clock cycle (62.5usec) - */ -#define RF_CSR_CFG1 0x1024 -#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff) -#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000) - -/* - * RF_CSR_CFG2: RF control register - * VALUE: Register value to program into RF - * RFGAP: Gap between BB_CONTROL_RF and RF_LE - * 0: 3 system clock cycle (37.5usec) - * 1: 5 system clock cycle (62.5usec) - */ -#define RF_CSR_CFG2 0x1028 -#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff) - -/* - * LED_CFG: LED control - * color LED's: - * 0: off - * 1: blinking upon TX2 - * 2: periodic slow blinking - * 3: always on - * LED polarity: - * 0: active low - * 1: active high - */ -#define LED_CFG 0x102c -#define LED_CFG_ON_PERIOD FIELD32(0x000000ff) -#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00) -#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000) -#define LED_CFG_R_LED_MODE FIELD32(0x03000000) -#define LED_CFG_G_LED_MODE FIELD32(0x0c000000) -#define LED_CFG_Y_LED_MODE FIELD32(0x30000000) -#define LED_CFG_LED_POLAR FIELD32(0x40000000) - -/* - * XIFS_TIME_CFG: MAC timing - * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX - * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX - * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX - * when MAC doesn't reference BBP signal BBRXEND - * EIFS: unit 1us - * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer - * - */ -#define XIFS_TIME_CFG 0x1100 -#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff) -#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00) -#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000) -#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000) -#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000) - -/* - * BKOFF_SLOT_CFG: - */ -#define BKOFF_SLOT_CFG 0x1104 -#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff) -#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00) - -/* - * NAV_TIME_CFG: - */ -#define NAV_TIME_CFG 0x1108 -#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff) -#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00) -#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000) -#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000) - -/* - * CH_TIME_CFG: count as channel busy - */ -#define CH_TIME_CFG 0x110c - -/* - * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us - */ -#define PBF_LIFE_TIMER 0x1110 - -/* - * BCN_TIME_CFG: - * BEACON_INTERVAL: in unit of 1/16 TU - * TSF_TICKING: Enable TSF auto counting - * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode - * BEACON_GEN: Enable beacon generator - */ -#define BCN_TIME_CFG 0x1114 -#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff) -#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000) -#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000) -#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000) -#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000) -#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000) - -/* - * TBTT_SYNC_CFG: - */ -#define TBTT_SYNC_CFG 0x1118 - -/* - * TSF_TIMER_DW0: Local lsb TSF timer, read-only - */ -#define TSF_TIMER_DW0 0x111c -#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff) - -/* - * TSF_TIMER_DW1: Local msb TSF timer, read-only - */ -#define TSF_TIMER_DW1 0x1120 -#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff) - -/* - * TBTT_TIMER: TImer remains till next TBTT, read-only - */ -#define TBTT_TIMER 0x1124 - -/* - * INT_TIMER_CFG: - */ -#define INT_TIMER_CFG 0x1128 - -/* - * INT_TIMER_EN: GP-timer and pre-tbtt Int enable - */ -#define INT_TIMER_EN 0x112c - -/* - * CH_IDLE_STA: channel idle time - */ -#define CH_IDLE_STA 0x1130 - -/* - * CH_BUSY_STA: channel busy time - */ -#define CH_BUSY_STA 0x1134 - -/* - * MAC_STATUS_CFG: - * BBP_RF_BUSY: When set to 0, BBP and RF are stable. - * if 1 or higher one of the 2 registers is busy. - */ -#define MAC_STATUS_CFG 0x1200 -#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003) - -/* - * PWR_PIN_CFG: - */ -#define PWR_PIN_CFG 0x1204 - -/* - * AUTOWAKEUP_CFG: Manual power control / status register - * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set - * AUTOWAKE: 0:sleep, 1:awake - */ -#define AUTOWAKEUP_CFG 0x1208 -#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff) -#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00) -#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000) - -/* - * EDCA_AC0_CFG: - */ -#define EDCA_AC0_CFG 0x1300 -#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_AC1_CFG: - */ -#define EDCA_AC1_CFG 0x1304 -#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_AC2_CFG: - */ -#define EDCA_AC2_CFG 0x1308 -#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_AC3_CFG: - */ -#define EDCA_AC3_CFG 0x130c -#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) -#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) -#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) -#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) - -/* - * EDCA_TID_AC_MAP: - */ -#define EDCA_TID_AC_MAP 0x1310 - -/* - * TX_PWR_CFG_0: - */ -#define TX_PWR_CFG_0 0x1314 -#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f) -#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0) -#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00) -#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000) -#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000) -#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000) -#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000) -#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_1: - */ -#define TX_PWR_CFG_1 0x1318 -#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f) -#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0) -#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00) -#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000) -#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000) -#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000) -#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000) -#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_2: - */ -#define TX_PWR_CFG_2 0x131c -#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f) -#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0) -#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00) -#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000) -#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000) -#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000) -#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000) -#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_3: - */ -#define TX_PWR_CFG_3 0x1320 -#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f) -#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0) -#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00) -#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000) -#define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000) -#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000) -#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000) -#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000) - -/* - * TX_PWR_CFG_4: - */ -#define TX_PWR_CFG_4 0x1324 -#define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f) -#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0) -#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00) -#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000) - -/* - * TX_PIN_CFG: - */ -#define TX_PIN_CFG 0x1328 -#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001) -#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002) -#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004) -#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008) -#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010) -#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020) -#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040) -#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080) -#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100) -#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200) -#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400) -#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800) -#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000) -#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000) -#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000) -#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000) -#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000) -#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000) -#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000) -#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000) - -/* - * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz - */ -#define TX_BAND_CFG 0x132c -#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001) -#define TX_BAND_CFG_A FIELD32(0x00000002) -#define TX_BAND_CFG_BG FIELD32(0x00000004) - -/* - * TX_SW_CFG0: - */ -#define TX_SW_CFG0 0x1330 - -/* - * TX_SW_CFG1: - */ -#define TX_SW_CFG1 0x1334 - -/* - * TX_SW_CFG2: - */ -#define TX_SW_CFG2 0x1338 - -/* - * TXOP_THRES_CFG: - */ -#define TXOP_THRES_CFG 0x133c - -/* - * TXOP_CTRL_CFG: - */ -#define TXOP_CTRL_CFG 0x1340 - -/* - * TX_RTS_CFG: - * RTS_THRES: unit:byte - * RTS_FBK_EN: enable rts rate fallback - */ -#define TX_RTS_CFG 0x1344 -#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff) -#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00) -#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000) - -/* - * TX_TIMEOUT_CFG: - * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us - * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure - * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation. - * it is recommended that: - * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) - */ -#define TX_TIMEOUT_CFG 0x1348 -#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0) -#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00) -#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000) - -/* - * TX_RTY_CFG: - * SHORT_RTY_LIMIT: short retry limit - * LONG_RTY_LIMIT: long retry limit - * LONG_RTY_THRE: Long retry threshoold - * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode - * 0:expired by retry limit, 1: expired by mpdu life timer - * AGG_RTY_MODE: Aggregate MPDU retry mode - * 0:expired by retry limit, 1: expired by mpdu life timer - * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable - */ -#define TX_RTY_CFG 0x134c -#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff) -#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00) -#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000) -#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000) -#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000) -#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000) - -/* - * TX_LINK_CFG: - * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us - * MFB_ENABLE: TX apply remote MFB 1:enable - * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable - * 0: not apply remote remote unsolicit (MFS=7) - * TX_MRQ_EN: MCS request TX enable - * TX_RDG_EN: RDG TX enable - * TX_CF_ACK_EN: Piggyback CF-ACK enable - * REMOTE_MFB: remote MCS feedback - * REMOTE_MFS: remote MCS feedback sequence number - */ -#define TX_LINK_CFG 0x1350 -#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff) -#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100) -#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200) -#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400) -#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800) -#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000) -#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000) -#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000) - -/* - * HT_FBK_CFG0: - */ -#define HT_FBK_CFG0 0x1354 -#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f) -#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0) -#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00) -#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000) -#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000) -#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000) -#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000) -#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000) - -/* - * HT_FBK_CFG1: - */ -#define HT_FBK_CFG1 0x1358 -#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f) -#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0) -#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00) -#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000) -#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000) -#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000) -#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000) -#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000) - -/* - * LG_FBK_CFG0: - */ -#define LG_FBK_CFG0 0x135c -#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f) -#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0) -#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00) -#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000) -#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000) -#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000) -#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000) -#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000) - -/* - * LG_FBK_CFG1: - */ -#define LG_FBK_CFG1 0x1360 -#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f) -#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0) -#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00) -#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000) - -/* - * CCK_PROT_CFG: CCK Protection - * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd) - * PROTECT_CTRL: Protection control frame type for CCK TX - * 0:none, 1:RTS/CTS, 2:CTS-to-self - * PROTECT_NAV: TXOP protection type for CCK TX - * 0:none, 1:ShortNAVprotect, 2:LongNAVProtect - * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow - * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow - * RTS_TH_EN: RTS threshold enable on CCK TX - */ -#define CCK_PROT_CFG 0x1364 -#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define CCK_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * OFDM_PROT_CFG: OFDM Protection - */ -#define OFDM_PROT_CFG 0x1368 -#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define OFDM_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * MM20_PROT_CFG: MM20 Protection - */ -#define MM20_PROT_CFG 0x136c -#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define MM20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * MM40_PROT_CFG: MM40 Protection - */ -#define MM40_PROT_CFG 0x1370 -#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define MM40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * GF20_PROT_CFG: GF20 Protection - */ -#define GF20_PROT_CFG 0x1374 -#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define GF20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * GF40_PROT_CFG: GF40 Protection - */ -#define GF40_PROT_CFG 0x1378 -#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) -#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) -#define GF40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000) -#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) -#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) -#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) -#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) -#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) -#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) -#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) - -/* - * EXP_CTS_TIME: - */ -#define EXP_CTS_TIME 0x137c - -/* - * EXP_ACK_TIME: - */ -#define EXP_ACK_TIME 0x1380 - -/* - * RX_FILTER_CFG: RX configuration register. - */ -#define RX_FILTER_CFG 0x1400 -#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001) -#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002) -#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004) -#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008) -#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010) -#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020) -#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040) -#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080) -#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100) -#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200) -#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400) -#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800) -#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000) -#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000) -#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000) -#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000) -#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000) - -/* - * AUTO_RSP_CFG: - * AUTORESPONDER: 0: disable, 1: enable - * BAC_ACK_POLICY: 0:long, 1:short preamble - * CTS_40_MMODE: Response CTS 40MHz duplicate mode - * CTS_40_MREF: Response CTS 40MHz duplicate mode - * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble - * DUAL_CTS_EN: Power bit value in control frame - * ACK_CTS_PSM_BIT:Power bit value in control frame - */ -#define AUTO_RSP_CFG 0x1404 -#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001) -#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002) -#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004) -#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008) -#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010) -#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040) -#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080) - -/* - * LEGACY_BASIC_RATE: - */ -#define LEGACY_BASIC_RATE 0x1408 - -/* - * HT_BASIC_RATE: - */ -#define HT_BASIC_RATE 0x140c - -/* - * HT_CTRL_CFG: - */ -#define HT_CTRL_CFG 0x1410 - -/* - * SIFS_COST_CFG: - */ -#define SIFS_COST_CFG 0x1414 - -/* - * RX_PARSER_CFG: - * Set NAV for all received frames - */ -#define RX_PARSER_CFG 0x1418 - -/* - * TX_SEC_CNT0: - */ -#define TX_SEC_CNT0 0x1500 - -/* - * RX_SEC_CNT0: - */ -#define RX_SEC_CNT0 0x1504 - -/* - * CCMP_FC_MUTE: - */ -#define CCMP_FC_MUTE 0x1508 - -/* - * TXOP_HLDR_ADDR0: - */ -#define TXOP_HLDR_ADDR0 0x1600 - -/* - * TXOP_HLDR_ADDR1: - */ -#define TXOP_HLDR_ADDR1 0x1604 - -/* - * TXOP_HLDR_ET: - */ -#define TXOP_HLDR_ET 0x1608 - -/* - * QOS_CFPOLL_RA_DW0: - */ -#define QOS_CFPOLL_RA_DW0 0x160c - -/* - * QOS_CFPOLL_RA_DW1: - */ -#define QOS_CFPOLL_RA_DW1 0x1610 - -/* - * QOS_CFPOLL_QC: - */ -#define QOS_CFPOLL_QC 0x1614 - -/* - * RX_STA_CNT0: RX PLCP error count & RX CRC error count - */ -#define RX_STA_CNT0 0x1700 -#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff) -#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000) - -/* - * RX_STA_CNT1: RX False CCA count & RX LONG frame count - */ -#define RX_STA_CNT1 0x1704 -#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff) -#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000) - -/* - * RX_STA_CNT2: - */ -#define RX_STA_CNT2 0x1708 -#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff) -#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000) - -/* - * TX_STA_CNT0: TX Beacon count - */ -#define TX_STA_CNT0 0x170c -#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff) -#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000) - -/* - * TX_STA_CNT1: TX tx count - */ -#define TX_STA_CNT1 0x1710 -#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff) -#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000) - -/* - * TX_STA_CNT2: TX tx count - */ -#define TX_STA_CNT2 0x1714 -#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff) -#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000) - -/* - * TX_STA_FIFO: TX Result for specific PID status fifo register - */ -#define TX_STA_FIFO 0x1718 -#define TX_STA_FIFO_VALID FIELD32(0x00000001) -#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e) -#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020) -#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040) -#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080) -#define TX_STA_FIFO_WCID FIELD32(0x0000ff00) -#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000) - -/* - * TX_AGG_CNT: Debug counter - */ -#define TX_AGG_CNT 0x171c -#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT0: - */ -#define TX_AGG_CNT0 0x1720 -#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT1: - */ -#define TX_AGG_CNT1 0x1724 -#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT2: - */ -#define TX_AGG_CNT2 0x1728 -#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT3: - */ -#define TX_AGG_CNT3 0x172c -#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT4: - */ -#define TX_AGG_CNT4 0x1730 -#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT5: - */ -#define TX_AGG_CNT5 0x1734 -#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT6: - */ -#define TX_AGG_CNT6 0x1738 -#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000) - -/* - * TX_AGG_CNT7: - */ -#define TX_AGG_CNT7 0x173c -#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff) -#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000) - -/* - * MPDU_DENSITY_CNT: - * TX_ZERO_DEL: TX zero length delimiter count - * RX_ZERO_DEL: RX zero length delimiter count - */ -#define MPDU_DENSITY_CNT 0x1740 -#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff) -#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000) - -/* - * Security key table memory. - * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry - * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry - * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry - * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry - * SHARED_KEY_TABLE_BASE: 32 bytes * 32-entry - * SHARED_KEY_MODE_BASE: 4 bits * 32-entry - */ -#define MAC_WCID_BASE 0x1800 -#define PAIRWISE_KEY_TABLE_BASE 0x4000 -#define MAC_IVEIV_TABLE_BASE 0x6000 -#define MAC_WCID_ATTRIBUTE_BASE 0x6800 -#define SHARED_KEY_TABLE_BASE 0x6c00 -#define SHARED_KEY_MODE_BASE 0x7000 - -#define MAC_WCID_ENTRY(__idx) \ - ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) ) -#define PAIRWISE_KEY_ENTRY(__idx) \ - ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) -#define MAC_IVEIV_ENTRY(__idx) \ - ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) ) -#define MAC_WCID_ATTR_ENTRY(__idx) \ - ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) ) -#define SHARED_KEY_ENTRY(__idx) \ - ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) ) -#define SHARED_KEY_MODE_ENTRY(__idx) \ - ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) ) - -struct mac_wcid_entry { - u8 mac[6]; - u8 reserved[2]; -} __attribute__ ((packed)); - -struct hw_key_entry { - u8 key[16]; - u8 tx_mic[8]; - u8 rx_mic[8]; -} __attribute__ ((packed)); - -struct mac_iveiv_entry { - u8 iv[8]; -} __attribute__ ((packed)); - -/* - * MAC_WCID_ATTRIBUTE: - */ -#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001) -#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e) -#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070) -#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380) - -/* - * SHARED_KEY_MODE: - */ -#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007) -#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070) -#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700) -#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000) -#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000) -#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000) -#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000) -#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000) - -/* - * HOST-MCU communication - */ - -/* - * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. - */ -#define H2M_MAILBOX_CSR 0x7010 -#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) -#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) -#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) -#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) - -/* - * H2M_MAILBOX_CID: - */ -#define H2M_MAILBOX_CID 0x7014 -#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff) -#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00) -#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000) -#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000) - -/* - * H2M_MAILBOX_STATUS: - */ -#define H2M_MAILBOX_STATUS 0x701c - -/* - * H2M_INT_SRC: - */ -#define H2M_INT_SRC 0x7024 - -/* - * H2M_BBP_AGENT: - */ -#define H2M_BBP_AGENT 0x7028 - -/* - * MCU_LEDCS: LED control for MCU Mailbox. - */ -#define MCU_LEDCS_LED_MODE FIELD8(0x1f) -#define MCU_LEDCS_POLARITY FIELD8(0x01) - -/* - * HW_CS_CTS_BASE: - * Carrier-sense CTS frame base address. - * It's where mac stores carrier-sense frame for carrier-sense function. - */ -#define HW_CS_CTS_BASE 0x7700 - -/* - * HW_DFS_CTS_BASE: - * FS CTS frame base address. It's where mac stores CTS frame for DFS. - */ -#define HW_DFS_CTS_BASE 0x7780 - -/* - * TXRX control registers - base address 0x3000 - */ - -/* - * TXRX_CSR1: - * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. - */ -#define TXRX_CSR1 0x77d0 - -/* - * HW_DEBUG_SETTING_BASE: - * since NULL frame won't be that long (256 byte) - * We steal 16 tail bytes to save debugging settings - */ -#define HW_DEBUG_SETTING_BASE 0x77f0 -#define HW_DEBUG_SETTING_BASE2 0x7770 - -/* - * HW_BEACON_BASE - * In order to support maximum 8 MBSS and its maximum length - * is 512 bytes for each beacon - * Three section discontinue memory segments will be used. - * 1. The original region for BCN 0~3 - * 2. Extract memory from FCE table for BCN 4~5 - * 3. Extract memory from Pair-wise key table for BCN 6~7 - * It occupied those memory of wcid 238~253 for BCN 6 - * and wcid 222~237 for BCN 7 - * - * IMPORTANT NOTE: Not sure why legacy driver does this, - * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6. - */ -#define HW_BEACON_BASE0 0x7800 -#define HW_BEACON_BASE1 0x7a00 -#define HW_BEACON_BASE2 0x7c00 -#define HW_BEACON_BASE3 0x7e00 -#define HW_BEACON_BASE4 0x7200 -#define HW_BEACON_BASE5 0x7400 -#define HW_BEACON_BASE6 0x5dc0 -#define HW_BEACON_BASE7 0x5bc0 - -#define HW_BEACON_OFFSET(__index) \ - ( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \ - (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \ - (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) ) - -/* * 8051 firmware image. */ #define FIRMWARE_RT2870 "rt2870.bin" #define FIRMWARE_IMAGE_BASE 0x3000 /* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * BBP 1: TX Antenna - */ -#define BBP1_TX_POWER FIELD8(0x07) -#define BBP1_TX_ANTENNA FIELD8(0x18) - -/* - * BBP 3: RX Antenna - */ -#define BBP3_RX_ANTENNA FIELD8(0x18) -#define BBP3_HT40_PLUS FIELD8(0x20) - -/* - * BBP 4: Bandwidth - */ -#define BBP4_TX_BF FIELD8(0x01) -#define BBP4_BANDWIDTH FIELD8(0x18) - -/* - * RFCSR registers - * The wordsize of the RFCSR is 8 bits. - */ - -/* - * RFCSR 6: - */ -#define RFCSR6_R FIELD8(0x03) - -/* - * RFCSR 7: - */ -#define RFCSR7_RF_TUNING FIELD8(0x01) - -/* - * RFCSR 12: - */ -#define RFCSR12_TX_POWER FIELD8(0x1f) - -/* - * RFCSR 22: - */ -#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) - -/* - * RFCSR 23: - */ -#define RFCSR23_FREQ_OFFSET FIELD8(0x7f) - -/* - * RFCSR 30: - */ -#define RFCSR30_RF_CALIBRATION FIELD8(0x80) - -/* - * RF registers - */ - -/* - * RF 2 - */ -#define RF2_ANTENNA_RX2 FIELD32(0x00000040) -#define RF2_ANTENNA_TX1 FIELD32(0x00004000) -#define RF2_ANTENNA_RX1 FIELD32(0x00020000) - -/* - * RF 3 - */ -#define RF3_TXPOWER_G FIELD32(0x00003e00) -#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200) -#define RF3_TXPOWER_A FIELD32(0x00003c00) - -/* - * RF 4 - */ -#define RF4_TXPOWER_G FIELD32(0x000007c0) -#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040) -#define RF4_TXPOWER_A FIELD32(0x00000780) -#define RF4_FREQ_OFFSET FIELD32(0x001f8000) -#define RF4_HT40 FIELD32(0x00200000) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -/* - * EEPROM Version - */ -#define EEPROM_VERSION 0x0001 -#define EEPROM_VERSION_FAE FIELD16(0x00ff) -#define EEPROM_VERSION_VERSION FIELD16(0xff00) - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM ANTENNA config - * RXPATH: 1: 1R, 2: 2R, 3: 3R - * TXPATH: 1: 1T, 2: 2T - */ -#define EEPROM_ANTENNA 0x001a -#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f) -#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00) - -/* - * EEPROM NIC config - * CARDBUS_ACCEL: 0 - enable, 1 - disable - */ -#define EEPROM_NIC 0x001b -#define EEPROM_NIC_HW_RADIO FIELD16(0x0001) -#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002) -#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004) -#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008) -#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010) -#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020) -#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040) -#define EEPROM_NIC_WPS_PBC FIELD16(0x0080) -#define EEPROM_NIC_BW40M_BG FIELD16(0x0100) -#define EEPROM_NIC_BW40M_A FIELD16(0x0200) - -/* - * EEPROM frequency - */ -#define EEPROM_FREQ 0x001d -#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) -#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00) -#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000) - -/* - * EEPROM LED - * POLARITY_RDY_G: Polarity RDY_G setting. - * POLARITY_RDY_A: Polarity RDY_A setting. - * POLARITY_ACT: Polarity ACT setting. - * POLARITY_GPIO_0: Polarity GPIO0 setting. - * POLARITY_GPIO_1: Polarity GPIO1 setting. - * POLARITY_GPIO_2: Polarity GPIO2 setting. - * POLARITY_GPIO_3: Polarity GPIO3 setting. - * POLARITY_GPIO_4: Polarity GPIO4 setting. - * LED_MODE: Led mode. - */ -#define EEPROM_LED1 0x001e -#define EEPROM_LED2 0x001f -#define EEPROM_LED3 0x0020 -#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001) -#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) -#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) -#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) -#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) -#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) -#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) -#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) -#define EEPROM_LED_LED_MODE FIELD16(0x1f00) - -/* - * EEPROM LNA - */ -#define EEPROM_LNA 0x0022 -#define EEPROM_LNA_BG FIELD16(0x00ff) -#define EEPROM_LNA_A0 FIELD16(0xff00) - -/* - * EEPROM RSSI BG offset - */ -#define EEPROM_RSSI_BG 0x0023 -#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff) -#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00) - -/* - * EEPROM RSSI BG2 offset - */ -#define EEPROM_RSSI_BG2 0x0024 -#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff) -#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00) - -/* - * EEPROM RSSI A offset - */ -#define EEPROM_RSSI_A 0x0025 -#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff) -#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00) - -/* - * EEPROM RSSI A2 offset - */ -#define EEPROM_RSSI_A2 0x0026 -#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff) -#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00) - -/* - * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power. - * This is delta in 40MHZ. - * VALUE: Tx Power dalta value (MAX=4) - * TYPE: 1: Plus the delta value, 0: minus the delta value - * TXPOWER: Enable: - */ -#define EEPROM_TXPOWER_DELTA 0x0028 -#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f) -#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040) -#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080) - -/* - * EEPROM TXPOWER 802.11BG - */ -#define EEPROM_TXPOWER_BG1 0x0029 -#define EEPROM_TXPOWER_BG2 0x0030 -#define EEPROM_TXPOWER_BG_SIZE 7 -#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00) - -/* - * EEPROM TXPOWER 802.11A - */ -#define EEPROM_TXPOWER_A1 0x003c -#define EEPROM_TXPOWER_A2 0x0053 -#define EEPROM_TXPOWER_A_SIZE 6 -#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) - -/* - * EEPROM TXpower byrate: 20MHZ power - */ -#define EEPROM_TXPOWER_BYRATE 0x006f - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x0078 -#define EEPROM_BBP_SIZE 16 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * MCU mailbox commands. - */ -#define MCU_SLEEP 0x30 -#define MCU_WAKEUP 0x31 -#define MCU_RADIO_OFF 0x35 -#define MCU_CURRENT 0x36 -#define MCU_LED 0x50 -#define MCU_LED_STRENGTH 0x51 -#define MCU_LED_1 0x52 -#define MCU_LED_2 0x53 -#define MCU_LED_3 0x54 -#define MCU_RADAR 0x60 -#define MCU_BOOT_SIGNAL 0x72 -#define MCU_BBP_SIGNAL 0x80 -#define MCU_POWER_SAVE 0x83 - -/* - * MCU mailbox tokens - */ -#define TOKEN_WAKUP 3 - -/* * DMA descriptor defines. */ -#define TXD_DESC_SIZE ( 4 * sizeof(__le32) ) #define TXINFO_DESC_SIZE ( 1 * sizeof(__le32) ) -#define TXWI_DESC_SIZE ( 4 * sizeof(__le32) ) -#define RXD_DESC_SIZE ( 1 * sizeof(__le32) ) -#define RXWI_DESC_SIZE ( 4 * sizeof(__le32) ) - -/* - * TX descriptor format for TX, PRIO and Beacon Ring. - */ - -/* - * Word0 - */ -#define TXD_W0_SD_PTR0 FIELD32(0xffffffff) - -/* - * Word1 - */ -#define TXD_W1_SD_LEN1 FIELD32(0x00003fff) -#define TXD_W1_LAST_SEC1 FIELD32(0x00004000) -#define TXD_W1_BURST FIELD32(0x00008000) -#define TXD_W1_SD_LEN0 FIELD32(0x3fff0000) -#define TXD_W1_LAST_SEC0 FIELD32(0x40000000) -#define TXD_W1_DMA_DONE FIELD32(0x80000000) - -/* - * Word2 - */ -#define TXD_W2_SD_PTR1 FIELD32(0xffffffff) - -/* - * Word3 - * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI - * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler. - * 0:MGMT, 1:HCCA 2:EDCA - */ -#define TXD_W3_WIV FIELD32(0x01000000) -#define TXD_W3_QSEL FIELD32(0x06000000) -#define TXD_W3_TCO FIELD32(0x20000000) -#define TXD_W3_UCO FIELD32(0x40000000) -#define TXD_W3_ICO FIELD32(0x80000000) +#define RXINFO_DESC_SIZE ( 1 * sizeof(__le32) ) /* * TX Info structure @@ -1807,52 +97,6 @@ struct mac_iveiv_entry { #define TXINFO_W0_USB_DMA_TX_BURST FIELD32(0x80000000) /* - * TX WI structure - */ - -/* - * Word0 - * FRAG: 1 To inform TKIP engine this is a fragment. - * MIMO_PS: The remote peer is in dynamic MIMO-PS mode - * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs - * BW: Channel bandwidth 20MHz or 40 MHz - * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED - */ -#define TXWI_W0_FRAG FIELD32(0x00000001) -#define TXWI_W0_MIMO_PS FIELD32(0x00000002) -#define TXWI_W0_CF_ACK FIELD32(0x00000004) -#define TXWI_W0_TS FIELD32(0x00000008) -#define TXWI_W0_AMPDU FIELD32(0x00000010) -#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0) -#define TXWI_W0_TX_OP FIELD32(0x00000300) -#define TXWI_W0_MCS FIELD32(0x007f0000) -#define TXWI_W0_BW FIELD32(0x00800000) -#define TXWI_W0_SHORT_GI FIELD32(0x01000000) -#define TXWI_W0_STBC FIELD32(0x06000000) -#define TXWI_W0_IFS FIELD32(0x08000000) -#define TXWI_W0_PHYMODE FIELD32(0xc0000000) - -/* - * Word1 - */ -#define TXWI_W1_ACK FIELD32(0x00000001) -#define TXWI_W1_NSEQ FIELD32(0x00000002) -#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc) -#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00) -#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) -#define TXWI_W1_PACKETID FIELD32(0xf0000000) - -/* - * Word2 - */ -#define TXWI_W2_IV FIELD32(0xffffffff) - -/* - * Word3 - */ -#define TXWI_W3_EIV FIELD32(0xffffffff) - -/* * RX descriptor format for RX Ring. */ @@ -1888,64 +132,4 @@ struct mac_iveiv_entry { #define RXD_W0_LAST_AMSDU FIELD32(0x00080000) #define RXD_W0_PLCP_SIGNAL FIELD32(0xfff00000) -/* - * RX WI structure - */ - -/* - * Word0 - */ -#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff) -#define RXWI_W0_KEY_INDEX FIELD32(0x00000300) -#define RXWI_W0_BSSID FIELD32(0x00001c00) -#define RXWI_W0_UDF FIELD32(0x0000e000) -#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) -#define RXWI_W0_TID FIELD32(0xf0000000) - -/* - * Word1 - */ -#define RXWI_W1_FRAG FIELD32(0x0000000f) -#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0) -#define RXWI_W1_MCS FIELD32(0x007f0000) -#define RXWI_W1_BW FIELD32(0x00800000) -#define RXWI_W1_SHORT_GI FIELD32(0x01000000) -#define RXWI_W1_STBC FIELD32(0x06000000) -#define RXWI_W1_PHYMODE FIELD32(0xc0000000) - -/* - * Word2 - */ -#define RXWI_W2_RSSI0 FIELD32(0x000000ff) -#define RXWI_W2_RSSI1 FIELD32(0x0000ff00) -#define RXWI_W2_RSSI2 FIELD32(0x00ff0000) - -/* - * Word3 - */ -#define RXWI_W3_SNR0 FIELD32(0x000000ff) -#define RXWI_W3_SNR1 FIELD32(0x0000ff00) - -/* - * Macros for converting txpower from EEPROM to mac80211 value - * and from mac80211 value to register value. - */ -#define MIN_G_TXPOWER 0 -#define MIN_A_TXPOWER -7 -#define MAX_G_TXPOWER 31 -#define MAX_A_TXPOWER 15 -#define DEFAULT_TXPOWER 5 - -#define TXPOWER_G_FROM_DEV(__txpower) \ - ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) - -#define TXPOWER_G_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER) - -#define TXPOWER_A_FROM_DEV(__txpower) \ - ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) - -#define TXPOWER_A_TO_DEV(__txpower) \ - clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER) - #endif /* RT2800USB_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 196de8ab8153..c83dbaefd57a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -144,6 +144,11 @@ struct avg_val { int avg_weight; }; +enum rt2x00_chip_intf { + RT2X00_CHIP_INTF_PCI, + RT2X00_CHIP_INTF_USB, +}; + /* * Chipset identification * The chipset on the device is composed of a RT and RF chip. @@ -169,6 +174,8 @@ struct rt2x00_chip { u16 rf; u32 rev; + + enum rt2x00_chip_intf intf; }; /* @@ -842,9 +849,23 @@ struct rt2x00_dev { * Firmware image. */ const struct firmware *fw; + + /* + * Driver specific data. + */ + void *priv; }; /* + * Register defines. + * Some registers require multiple attempts before success, + * in those cases REGISTER_BUSY_COUNT attempts should be + * taken with a REGISTER_BUSY_DELAY interval. + */ +#define REGISTER_BUSY_COUNT 5 +#define REGISTER_BUSY_DELAY 100 + +/* * Generic RF access. * The RF is being accessed by word index. */ @@ -932,6 +953,28 @@ static inline bool rt2x00_check_rev(const struct rt2x00_chip *chipset, return ((chipset->rev & mask) == rev); } +static inline void rt2x00_set_chip_intf(struct rt2x00_dev *rt2x00dev, + enum rt2x00_chip_intf intf) +{ + rt2x00dev->chip.intf = intf; +} + +static inline bool rt2x00_intf(const struct rt2x00_chip *chipset, + enum rt2x00_chip_intf intf) +{ + return (chipset->intf == intf); +} + +static inline bool rt2x00_intf_is_pci(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_intf(&rt2x00dev->chip, RT2X00_CHIP_INTF_PCI); +} + +static inline bool rt2x00_intf_is_usb(struct rt2x00_dev *rt2x00dev) +{ + return rt2x00_intf(&rt2x00dev->chip, RT2X00_CHIP_INTF_USB); +} + /** * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes. * @rt2x00dev: Pointer to &struct rt2x00_dev. diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.h b/drivers/net/wireless/rt2x00/rt2x00leds.h index 1046977e6a12..8e03c045e037 100644 --- a/drivers/net/wireless/rt2x00/rt2x00leds.h +++ b/drivers/net/wireless/rt2x00/rt2x00leds.h @@ -33,8 +33,6 @@ enum led_type { LED_TYPE_QUALITY, }; -#ifdef CONFIG_RT2X00_LIB_LEDS - struct rt2x00_led { struct rt2x00_dev *rt2x00dev; struct led_classdev led_dev; @@ -45,6 +43,4 @@ struct rt2x00_led { #define LED_REGISTERED ( 1 << 1 ) }; -#endif /* CONFIG_RT2X00_LIB_LEDS */ - #endif /* RT2X00LEDS_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index 15a12487e04b..ae33eebe9a6f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -35,15 +35,6 @@ #define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops) /* - * Register defines. - * Some registers require multiple attempts before success, - * in those cases REGISTER_BUSY_COUNT attempts should be - * taken with a REGISTER_BUSY_DELAY interval. - */ -#define REGISTER_BUSY_COUNT 5 -#define REGISTER_BUSY_DELAY 100 - -/* * Register access. */ static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev, @@ -53,10 +44,9 @@ static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev, *value = readl(rt2x00dev->csr.base + offset); } -static inline void -rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u16 length) +static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + void *value, const u32 length) { memcpy_fromio(value, rt2x00dev->csr.base + offset, length); } @@ -68,10 +58,10 @@ static inline void rt2x00pci_register_write(struct rt2x00_dev *rt2x00dev, writel(value, rt2x00dev->csr.base + offset); } -static inline void -rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - const void *value, const u16 length) +static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const void *value, + const u32 length) { memcpy_toio(rt2x00dev->csr.base + offset, value, length); } diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index f02b48a90593..c9cbdaa1073f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -160,7 +160,7 @@ EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff); int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, const unsigned int offset, - struct rt2x00_field32 field, + const struct rt2x00_field32 field, u32 *reg) { unsigned int i; diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index bd2d59c85f1b..9943e428bc21 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -39,17 +39,11 @@ #define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops) /* - * Register defines. - * Some registers require multiple attempts before success, - * in those cases REGISTER_BUSY_COUNT attempts should be - * taken with a REGISTER_BUSY_DELAY interval. * For USB vendor requests we need to pass a timeout * time in ms, for this we use the REGISTER_TIMEOUT, * however when loading firmware a higher value is * required. In that case we use the REGISTER_TIMEOUT_FIRMWARE. */ -#define REGISTER_BUSY_COUNT 5 -#define REGISTER_BUSY_DELAY 100 #define REGISTER_TIMEOUT 500 #define REGISTER_TIMEOUT_FIRMWARE 1000 @@ -232,7 +226,7 @@ static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev, } /** - * rt2x00usb_regbusy_read - Read 32bit register word + * rt2x00usb_register_read - Read 32bit register word * @rt2x00dev: Device pointer, see &struct rt2x00_dev. * @offset: Register offset * @value: Pointer to where register contents should be stored @@ -340,12 +334,13 @@ static inline void rt2x00usb_register_write_lock(struct rt2x00_dev *rt2x00dev, * through rt2x00usb_vendor_request_buff(). */ static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u32 length) + const unsigned int offset, + const void *value, + const u32 length) { rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, offset, - value, length, + (void *)value, length, REGISTER_TIMEOUT32(length)); } @@ -364,7 +359,7 @@ static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, */ int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, const unsigned int offset, - struct rt2x00_field32 field, + const struct rt2x00_field32 field, u32 *reg); /* diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h index bf9175a8c1f4..abb4907cf296 100644 --- a/drivers/net/wireless/rtl818x/rtl8187.h +++ b/drivers/net/wireless/rtl818x/rtl8187.h @@ -119,7 +119,6 @@ struct rtl8187_priv { } hw_rev; struct sk_buff_head rx_queue; u8 signal; - u8 quality; u8 noise; u8 slot_time; u8 aifsn[4]; diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 2017ccc00145..76973b8c7099 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -320,7 +320,6 @@ static void rtl8187_rx_cb(struct urb *urb) struct ieee80211_rx_status rx_status = { 0 }; int rate, signal; u32 flags; - u32 quality; unsigned long f; spin_lock_irqsave(&priv->rx_queue.lock, f); @@ -338,10 +337,9 @@ static void rtl8187_rx_cb(struct urb *urb) (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr)); flags = le32_to_cpu(hdr->flags); /* As with the RTL8187B below, the AGC is used to calculate - * signal strength and quality. In this case, the scaling + * signal strength. In this case, the scaling * constants are derived from the output of p54usb. */ - quality = 130 - ((41 * hdr->agc) >> 6); signal = -4 - ((27 * hdr->agc) >> 6); rx_status.antenna = (hdr->signal >> 7) & 1; rx_status.mactime = le64_to_cpu(hdr->mac_time); @@ -354,23 +352,18 @@ static void rtl8187_rx_cb(struct urb *urb) * In testing, none of these quantities show qualitative * agreement with AP signal strength, except for the AGC, * which is inversely proportional to the strength of the - * signal. In the following, the quality and signal strength - * are derived from the AGC. The arbitrary scaling constants + * signal. In the following, the signal strength + * is derived from the AGC. The arbitrary scaling constants * are chosen to make the results close to the values obtained * for a BCM4312 using b43 as the driver. The noise is ignored * for now. */ flags = le32_to_cpu(hdr->flags); - quality = 170 - hdr->agc; signal = 14 - hdr->agc / 2; rx_status.antenna = (hdr->rssi >> 7) & 1; rx_status.mactime = le64_to_cpu(hdr->mac_time); } - if (quality > 100) - quality = 100; - rx_status.qual = quality; - priv->quality = quality; rx_status.signal = signal; priv->signal = signal; rate = (flags >> 20) & 0xF; diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig index 88060e117541..785e0244e305 100644 --- a/drivers/net/wireless/wl12xx/Kconfig +++ b/drivers/net/wireless/wl12xx/Kconfig @@ -1,6 +1,6 @@ menuconfig WL12XX tristate "TI wl12xx driver support" - depends on MAC80211 && WLAN_80211 && EXPERIMENTAL + depends on MAC80211 && EXPERIMENTAL ---help--- This will enable TI wl12xx driver support. The drivers make use of the mac80211 stack. @@ -42,6 +42,7 @@ config WL1251_SDIO config WL1271 tristate "TI wl1271 support" depends on WL12XX && SPI_MASTER && GENERIC_HARDIRQS + depends on INET select FW_LOADER select CRC7 ---help--- diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c index 48b0bfd6c55a..da3bf1cebc08 100644 --- a/drivers/net/wireless/wl12xx/wl1251_main.c +++ b/drivers/net/wireless/wl12xx/wl1251_main.c @@ -1311,7 +1311,8 @@ int wl1251_init_ieee80211(struct wl1251 *wl) wl->hw->channel_change_time = 10000; wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM; + IEEE80211_HW_NOISE_DBM | + IEEE80211_HW_SUPPORTS_PS; wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); wl->hw->wiphy->max_scan_ssids = 1; diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h index 566f1521ec22..94359b1a861f 100644 --- a/drivers/net/wireless/wl12xx/wl1271.h +++ b/drivers/net/wireless/wl12xx/wl1271.h @@ -417,6 +417,9 @@ struct wl1271 { /* PSM mode requested */ bool psm_requested; + /* retry counter for PSM entries */ + u8 psm_entry_retry; + /* in dBm */ int power_level; diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c index bf5a8680a462..5cc89bbdac7a 100644 --- a/drivers/net/wireless/wl12xx/wl1271_acx.c +++ b/drivers/net/wireless/wl12xx/wl1271_acx.c @@ -141,7 +141,7 @@ int wl1271_acx_tx_power(struct wl1271 *wl, int power) * calibration, to avoid distortions */ /* acx->current_tx_power = power * 10; */ - acx->current_tx_power = 70; + acx->current_tx_power = 120; ret = wl1271_cmd_configure(wl, DOT11_CUR_TX_PWR, acx, sizeof(*acx)); if (ret < 0) { diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c index ba4a2b4f0f56..b7c96454cca3 100644 --- a/drivers/net/wireless/wl12xx/wl1271_boot.c +++ b/drivers/net/wireless/wl12xx/wl1271_boot.c @@ -380,7 +380,7 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl) } } - if (loop >= INIT_LOOP) { + if (loop > INIT_LOOP) { wl1271_error("timeout waiting for the hardware to " "complete initialization"); return -EIO; @@ -407,7 +407,8 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl) /* unmask required mbox events */ wl->event_mask = BSS_LOSE_EVENT_ID | - SCAN_COMPLETE_EVENT_ID; + SCAN_COMPLETE_EVENT_ID | + PS_REPORT_EVENT_ID; ret = wl1271_event_unmask(wl); if (ret < 0) { diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c index 0666328ce9ab..990eb01b4c71 100644 --- a/drivers/net/wireless/wl12xx/wl1271_cmd.c +++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c @@ -42,12 +42,14 @@ * @buf: buffer containing the command, must work with dma * @len: length of the buffer */ -int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len) +int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, + size_t res_len) { struct wl1271_cmd_header *cmd; unsigned long timeout; u32 intr; int ret = 0; + u16 status; cmd = buf; cmd->id = cpu_to_le16(id); @@ -74,6 +76,17 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len) intr = wl1271_spi_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); } + /* read back the status code of the command */ + if (res_len == 0) + res_len = sizeof(struct wl1271_cmd_header); + wl1271_spi_read(wl, wl->cmd_box_addr, cmd, res_len, false); + + status = le16_to_cpu(cmd->status); + if (status != CMD_STATUS_SUCCESS) { + wl1271_error("command execute failure %d", status); + ret = -EIO; + } + wl1271_spi_write32(wl, ACX_REG_INTERRUPT_ACK, WL1271_ACX_INTR_CMD_COMPLETE); @@ -262,7 +275,7 @@ int wl1271_cmd_join(struct wl1271 *wl) wl->tx_security_seq_16 = 0; wl->tx_security_seq_32 = 0; - ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join)); + ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join), 0); if (ret < 0) { wl1271_error("failed to initiate cmd join"); goto out_free; @@ -294,35 +307,21 @@ out: int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer) { int ret; + size_t res_len = 0; wl1271_debug(DEBUG_CMD, "cmd test"); - ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len); + if (answer) + res_len = buf_len; + + ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len, res_len); if (ret < 0) { wl1271_warning("TEST command failed"); return ret; } - if (answer) { - struct wl1271_command *cmd_answer; - u16 status; - - /* - * The test command got in, we can read the answer. - * The answer would be a wl1271_command, where the - * parameter array contains the actual answer. - */ - wl1271_spi_read(wl, wl->cmd_box_addr, buf, buf_len, false); - - cmd_answer = buf; - status = le16_to_cpu(cmd_answer->header.status); - - if (status != CMD_STATUS_SUCCESS) - wl1271_error("TEST command answer error: %d", status); - } - - return 0; + return ret; } /** @@ -345,21 +344,10 @@ int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len) /* payload length, does not include any headers */ acx->len = cpu_to_le16(len - sizeof(*acx)); - ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx)); - if (ret < 0) { + ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx), len); + if (ret < 0) wl1271_error("INTERROGATE command failed"); - goto out; - } - /* the interrogate command got in, we can read the answer */ - wl1271_spi_read(wl, wl->cmd_box_addr, buf, len, false); - - acx = buf; - if (le16_to_cpu(acx->cmd.status) != CMD_STATUS_SUCCESS) - wl1271_error("INTERROGATE command error: %d", - le16_to_cpu(acx->cmd.status)); - -out: return ret; } @@ -383,7 +371,7 @@ int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len) /* payload length, does not include any headers */ acx->len = cpu_to_le16(len - sizeof(*acx)); - ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len); + ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len, 0); if (ret < 0) { wl1271_warning("CONFIGURE command NOK"); return ret; @@ -416,7 +404,7 @@ int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable) cmd_tx = CMD_DISABLE_TX; } - ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd)); + ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd), 0); if (ret < 0) { wl1271_error("rx %s cmd for channel %d failed", enable ? "start" : "stop", channel); @@ -426,7 +414,7 @@ int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable) wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d", enable ? "start" : "stop", channel); - ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd)); + ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd), 0); if (ret < 0) { wl1271_error("tx %s cmd for channel %d failed", enable ? "start" : "stop", channel); @@ -468,7 +456,7 @@ int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode) ps_params->null_data_rate = cpu_to_le32(1); /* 1 Mbps */ ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params, - sizeof(*ps_params)); + sizeof(*ps_params), 0); if (ret < 0) { wl1271_error("cmd set_ps_mode failed"); goto out; @@ -499,19 +487,14 @@ int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer, cmd->addr = cpu_to_le32(addr); cmd->size = cpu_to_le32(len); - ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd)); + ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd), + sizeof(*cmd)); if (ret < 0) { wl1271_error("read memory command failed: %d", ret); goto out; } - /* the read command got in, we can now read the answer */ - wl1271_spi_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd), false); - - if (le16_to_cpu(cmd->header.status) != CMD_STATUS_SUCCESS) - wl1271_error("error in read command result: %d", - le16_to_cpu(cmd->header.status)); - + /* the read command got in */ memcpy(answer, cmd->value, len); out: @@ -613,7 +596,7 @@ int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len, trigger->timeout = 0; ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, - sizeof(*trigger)); + sizeof(*trigger), 0); if (ret < 0) { wl1271_error("trigger scan to failed for hw scan"); goto out; @@ -636,20 +619,10 @@ int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len, } } - ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params)); + ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params), 0); if (ret < 0) { wl1271_error("SCAN failed"); - goto out; - } - - wl1271_spi_read(wl, wl->cmd_box_addr, params, sizeof(*params), - false); - - if (le16_to_cpu(params->header.status) != CMD_STATUS_SUCCESS) { - wl1271_error("Scan command error: %d", - le16_to_cpu(params->header.status)); wl->scanning = false; - ret = -EIO; goto out; } @@ -684,7 +657,7 @@ int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id, if (buf) memcpy(cmd->template_data, buf, buf_len); - ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd)); + ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd), 0); if (ret < 0) { wl1271_warning("cmd set_template failed: %d", ret); goto out_free; @@ -863,7 +836,7 @@ int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id) cmd->key_action = cpu_to_le16(KEY_SET_ID); cmd->key_type = KEY_WEP; - ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd)); + ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0); if (ret < 0) { wl1271_warning("cmd set_default_wep_key failed: %d", ret); goto out; @@ -920,7 +893,7 @@ int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type, wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd)); - ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd)); + ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0); if (ret < 0) { wl1271_warning("could not set keys"); goto out; @@ -950,7 +923,7 @@ int wl1271_cmd_disconnect(struct wl1271 *wl) /* disconnect reason is not used in immediate disconnections */ cmd->type = DISCONNECT_IMMEDIATE; - ret = wl1271_cmd_send(wl, CMD_DISCONNECT, cmd, sizeof(*cmd)); + ret = wl1271_cmd_send(wl, CMD_DISCONNECT, cmd, sizeof(*cmd), 0); if (ret < 0) { wl1271_error("failed to send disconnect command"); goto out_free; diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h index 174b8209dbf3..9d7061b3c8a0 100644 --- a/drivers/net/wireless/wl12xx/wl1271_cmd.h +++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h @@ -29,7 +29,8 @@ struct acx_header; -int wl1271_cmd_send(struct wl1271 *wl, u16 type, void *buf, size_t buf_len); +int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, + size_t res_len); int wl1271_cmd_join(struct wl1271 *wl); int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer); int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len); diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h index 061d47520a32..565373ede265 100644 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -712,6 +712,14 @@ struct conf_conn_settings { * Range 0 - 255 */ u8 bet_max_consecutive; + + /* + * Specifies the maximum number of times to try PSM entry if it fails + * (if sending the appropriate null-func message fails.) + * + * Range 0 - 255 + */ + u8 psm_entry_retries; }; #define CONF_SR_ERR_TBL_MAX_VALUES 14 diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c index 31d396ba9188..e135d894b42a 100644 --- a/drivers/net/wireless/wl12xx/wl1271_event.c +++ b/drivers/net/wireless/wl12xx/wl1271_event.c @@ -68,6 +68,40 @@ static int wl1271_event_scan_complete(struct wl1271 *wl, return 0; } +static int wl1271_event_ps_report(struct wl1271 *wl, + struct event_mailbox *mbox, + bool *beacon_loss) +{ + int ret = 0; + + wl1271_debug(DEBUG_EVENT, "ps_status: 0x%x", mbox->ps_status); + + switch (mbox->ps_status) { + case EVENT_ENTER_POWER_SAVE_FAIL: + if (wl->psm_entry_retry < wl->conf.conn.psm_entry_retries) { + wl->psm_entry_retry++; + wl1271_error("PSM entry failed, retrying %d\n", + wl->psm_entry_retry); + ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE); + } else { + wl->psm_entry_retry = 0; + *beacon_loss = true; + } + break; + case EVENT_ENTER_POWER_SAVE_SUCCESS: + wl->psm_entry_retry = 0; + break; + case EVENT_EXIT_POWER_SAVE_FAIL: + wl1271_info("PSM exit failed"); + break; + case EVENT_EXIT_POWER_SAVE_SUCCESS: + default: + break; + } + + return ret; +} + static void wl1271_event_mbox_dump(struct event_mailbox *mbox) { wl1271_debug(DEBUG_EVENT, "MBOX DUMP:"); @@ -79,6 +113,7 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox) { int ret; u32 vector; + bool beacon_loss = false; wl1271_event_mbox_dump(mbox); @@ -101,7 +136,25 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox) wl1271_debug(DEBUG_EVENT, "BSS_LOSE_EVENT"); /* indicate to the stack, that beacons have been lost */ + beacon_loss = true; + } + + if (vector & PS_REPORT_EVENT_ID) { + wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT"); + ret = wl1271_event_ps_report(wl, mbox, &beacon_loss); + if (ret < 0) + return ret; + } + + if (beacon_loss) { + /* Obviously, it's dangerous to release the mutex while + we are holding many of the variables in the wl struct. + That's why it's done last in the function, and care must + be taken that nothing more is done after this function + returns. */ + mutex_unlock(&wl->mutex); ieee80211_beacon_loss(wl->vif); + mutex_lock(&wl->mutex); } return 0; diff --git a/drivers/net/wireless/wl12xx/wl1271_event.h b/drivers/net/wireless/wl12xx/wl1271_event.h index 3ab53d331f15..4e3f55ebb1a8 100644 --- a/drivers/net/wireless/wl12xx/wl1271_event.h +++ b/drivers/net/wireless/wl12xx/wl1271_event.h @@ -63,6 +63,13 @@ enum { EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff, }; +enum { + EVENT_ENTER_POWER_SAVE_FAIL = 0, + EVENT_ENTER_POWER_SAVE_SUCCESS, + EVENT_EXIT_POWER_SAVE_FAIL, + EVENT_EXIT_POWER_SAVE_SUCCESS, +}; + struct event_debug_report { u8 debug_event_id; u8 num_params; diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c index 417b4152feb1..7c2017f480ea 100644 --- a/drivers/net/wireless/wl12xx/wl1271_init.c +++ b/drivers/net/wireless/wl12xx/wl1271_init.c @@ -303,12 +303,15 @@ int wl1271_hw_init(struct wl1271 *wl) { int ret; + /* FIXME: the following parameter setting functions return error + * codes - the reason is so far unknown. The -EIO is therefore + * ignored for the time being. */ ret = wl1271_init_general_parms(wl); - if (ret < 0) + if (ret < 0 && ret != -EIO) return ret; ret = wl1271_init_radio_parms(wl); - if (ret < 0) + if (ret < 0 && ret != -EIO) return ret; /* Template settings */ diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c index 86132bb00787..d2149fcd3cf1 100644 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ b/drivers/net/wireless/wl12xx/wl1271_main.c @@ -222,7 +222,8 @@ static struct conf_drv_settings default_conf = { .snr_pkt_avg_weight = 10 }, .bet_enable = CONF_BET_MODE_ENABLE, - .bet_max_consecutive = 100 + .bet_max_consecutive = 100, + .psm_entry_retries = 3 }, .init = { .sr_err_tbl = { @@ -973,6 +974,7 @@ static void wl1271_op_stop(struct ieee80211_hw *hw) wl->rx_counter = 0; wl->elp = false; wl->psm = 0; + wl->psm_entry_retry = 0; wl->tx_queue_stopped = false; wl->power_level = WL1271_DEFAULT_POWER_LEVEL; wl->tx_blocks_available = 0; @@ -1067,11 +1069,11 @@ static int wl1271_op_config_interface(struct ieee80211_hw *hw, ret = wl1271_cmd_join(wl); if (ret < 0) goto out_sleep; - } - ret = wl1271_cmd_build_null_data(wl); - if (ret < 0) - goto out_sleep; + ret = wl1271_cmd_build_null_data(wl); + if (ret < 0) + goto out_sleep; + } wl->ssid_len = conf->ssid_len; if (wl->ssid_len) @@ -1137,10 +1139,6 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) wl->channel = channel; } - ret = wl1271_cmd_build_null_data(wl); - if (ret < 0) - goto out_sleep; - if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) { wl1271_info("psm enabled"); @@ -1165,7 +1163,7 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) if (conf->power_level != wl->power_level) { ret = wl1271_acx_tx_power(wl, conf->power_level); if (ret < 0) - goto out; + goto out_sleep; wl->power_level = conf->power_level; } @@ -1826,6 +1824,7 @@ static int __devinit wl1271_probe(struct spi_device *spi) wl->elp = false; wl->psm = 0; wl->psm_requested = false; + wl->psm_entry_retry = 0; wl->tx_queue_stopped = false; wl->power_level = WL1271_DEFAULT_POWER_LEVEL; wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET; diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.c b/drivers/net/wireless/wl12xx/wl1271_rx.c index 37d81ab6acc0..ca645f38109b 100644 --- a/drivers/net/wireless/wl12xx/wl1271_rx.c +++ b/drivers/net/wireless/wl12xx/wl1271_rx.c @@ -159,7 +159,7 @@ static void wl1271_rx_handle_data(struct wl1271 *wl, u32 length) u8 *buf; u8 beacon = 0; - skb = dev_alloc_skb(length); + skb = __dev_alloc_skb(length, GFP_KERNEL); if (!skb) { wl1271_error("Couldn't allocate RX frame"); return; diff --git a/drivers/net/wireless/zd1211rw/Kconfig b/drivers/net/wireless/zd1211rw/Kconfig index 74b31eafe72d..5f809695f71a 100644 --- a/drivers/net/wireless/zd1211rw/Kconfig +++ b/drivers/net/wireless/zd1211rw/Kconfig @@ -1,6 +1,6 @@ config ZD1211RW tristate "ZyDAS ZD1211/ZD1211B USB-wireless support" - depends on USB && MAC80211 && WLAN_80211 && EXPERIMENTAL + depends on USB && MAC80211 && EXPERIMENTAL select FW_LOADER ---help--- This is an experimental driver for the ZyDAS ZD1211/ZD1211B wireless diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 9a4dd5992f65..4e3873bfd010 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -131,5 +131,13 @@ source "drivers/staging/iio/Kconfig" source "drivers/staging/cowloop/Kconfig" +source "drivers/staging/strip/Kconfig" + +source "drivers/staging/arlan/Kconfig" + +source "drivers/staging/wavelan/Kconfig" + +source "drivers/staging/netwave/Kconfig" + endif # !STAGING_EXCLUDE_BUILD endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 104f2f8897ec..fb1d7851b563 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -47,3 +47,8 @@ obj-$(CONFIG_RAR_REGISTER) += rar/ obj-$(CONFIG_DX_SEP) += sep/ obj-$(CONFIG_IIO) += iio/ obj-$(CONFIG_COWLOOP) += cowloop/ +obj-$(CONFIG_STRIP) += strip/ +obj-$(CONFIG_ARLAN) += arlan/ +obj-$(CONFIG_WAVELAN) += wavelan/ +obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan/ +obj-$(CONFIG_PCMCIA_NETWAVE) += netwave/ diff --git a/drivers/staging/arlan/Kconfig b/drivers/staging/arlan/Kconfig new file mode 100644 index 000000000000..0585ed8b4d3e --- /dev/null +++ b/drivers/staging/arlan/Kconfig @@ -0,0 +1,15 @@ +config ARLAN + tristate "Aironet Arlan 655 & IC2200 DS support" + depends on ISA && !64BIT + select WIRELESS_EXT + ---help--- + Aironet makes Arlan, a class of wireless LAN adapters. These use the + www.Telxon.com chip, which is also used on several similar cards. + This driver is tested on the 655 and IC2200 series cards. Look at + <http://www.ylenurme.ee/~elmer/655/> for the latest information. + + The driver is built as two modules, arlan and arlan-proc. The latter + is the /proc interface and is not needed most of time. + + On some computers the card ends up in non-valid state after some + time. Use a ping-reset script to clear it. diff --git a/drivers/staging/arlan/Makefile b/drivers/staging/arlan/Makefile new file mode 100644 index 000000000000..9e58e5fae7b9 --- /dev/null +++ b/drivers/staging/arlan/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ARLAN) += arlan.o + +arlan-objs := arlan-main.o arlan-proc.o diff --git a/drivers/staging/arlan/TODO b/drivers/staging/arlan/TODO new file mode 100644 index 000000000000..9bd15a2f6d9e --- /dev/null +++ b/drivers/staging/arlan/TODO @@ -0,0 +1,7 @@ +TODO: + - step up and maintain this driver to ensure that it continues + to work. Having the hardware for this is pretty much a + requirement. If this does not happen, the will be removed in + the 2.6.35 kernel release. + +Please send patches to Greg Kroah-Hartman <greg@kroah.com>. diff --git a/drivers/net/wireless/arlan-main.c b/drivers/staging/arlan/arlan-main.c index 921a082487a1..921a082487a1 100644 --- a/drivers/net/wireless/arlan-main.c +++ b/drivers/staging/arlan/arlan-main.c diff --git a/drivers/net/wireless/arlan-proc.c b/drivers/staging/arlan/arlan-proc.c index a8b689635a3b..a8b689635a3b 100644 --- a/drivers/net/wireless/arlan-proc.c +++ b/drivers/staging/arlan/arlan-proc.c diff --git a/drivers/net/wireless/arlan.h b/drivers/staging/arlan/arlan.h index fb3ad51a1caf..fb3ad51a1caf 100644 --- a/drivers/net/wireless/arlan.h +++ b/drivers/staging/arlan/arlan.h diff --git a/drivers/staging/netwave/Kconfig b/drivers/staging/netwave/Kconfig new file mode 100644 index 000000000000..c0c996c0550a --- /dev/null +++ b/drivers/staging/netwave/Kconfig @@ -0,0 +1,11 @@ +config PCMCIA_NETWAVE + tristate "Xircom Netwave AirSurfer Pcmcia wireless support" + depends on PCMCIA + select WIRELESS_EXT + select WEXT_PRIV + help + Say Y here if you intend to attach this type of PCMCIA (PC-card) + wireless Ethernet networking card to your computer. + + To compile this driver as a module, choose M here: the module will be + called netwave_cs. If unsure, say N. diff --git a/drivers/staging/netwave/Makefile b/drivers/staging/netwave/Makefile new file mode 100644 index 000000000000..2ab89de59b9b --- /dev/null +++ b/drivers/staging/netwave/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o diff --git a/drivers/staging/netwave/TODO b/drivers/staging/netwave/TODO new file mode 100644 index 000000000000..9bd15a2f6d9e --- /dev/null +++ b/drivers/staging/netwave/TODO @@ -0,0 +1,7 @@ +TODO: + - step up and maintain this driver to ensure that it continues + to work. Having the hardware for this is pretty much a + requirement. If this does not happen, the will be removed in + the 2.6.35 kernel release. + +Please send patches to Greg Kroah-Hartman <greg@kroah.com>. diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/staging/netwave/netwave_cs.c index 9498b46c99a4..9498b46c99a4 100644 --- a/drivers/net/wireless/netwave_cs.c +++ b/drivers/staging/netwave/netwave_cs.c diff --git a/drivers/staging/strip/Kconfig b/drivers/staging/strip/Kconfig new file mode 100644 index 000000000000..36257b5cd6e1 --- /dev/null +++ b/drivers/staging/strip/Kconfig @@ -0,0 +1,22 @@ +config STRIP + tristate "STRIP (Metricom starmode radio IP)" + depends on INET + select WIRELESS_EXT + ---help--- + Say Y if you have a Metricom radio and intend to use Starmode Radio + IP. STRIP is a radio protocol developed for the MosquitoNet project + to send Internet traffic using Metricom radios. Metricom radios are + small, battery powered, 100kbit/sec packet radio transceivers, about + the size and weight of a cellular telephone. (You may also have heard + them called "Metricom modems" but we avoid the term "modem" because + it misleads many people into thinking that you can plug a Metricom + modem into a phone line and use it as a modem.) + + You can use STRIP on any Linux machine with a serial port, although + it is obviously most useful for people with laptop computers. If you + think you might get a Metricom radio in the future, there is no harm + in saying Y to STRIP now, except that it makes the kernel a bit + bigger. + + To compile this as a module, choose M here: the module will be + called strip. diff --git a/drivers/staging/strip/Makefile b/drivers/staging/strip/Makefile new file mode 100644 index 000000000000..6417bdcac2fb --- /dev/null +++ b/drivers/staging/strip/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_STRIP) += strip.o diff --git a/drivers/staging/strip/TODO b/drivers/staging/strip/TODO new file mode 100644 index 000000000000..9bd15a2f6d9e --- /dev/null +++ b/drivers/staging/strip/TODO @@ -0,0 +1,7 @@ +TODO: + - step up and maintain this driver to ensure that it continues + to work. Having the hardware for this is pretty much a + requirement. If this does not happen, the will be removed in + the 2.6.35 kernel release. + +Please send patches to Greg Kroah-Hartman <greg@kroah.com>. diff --git a/drivers/net/wireless/strip.c b/drivers/staging/strip/strip.c index 698aade79d40..698aade79d40 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/staging/strip/strip.c diff --git a/drivers/staging/wavelan/Kconfig b/drivers/staging/wavelan/Kconfig new file mode 100644 index 000000000000..786060e025c0 --- /dev/null +++ b/drivers/staging/wavelan/Kconfig @@ -0,0 +1,38 @@ +config WAVELAN + tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support" + depends on ISA + select WIRELESS_EXT + select WEXT_SPY + select WEXT_PRIV + ---help--- + The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is + a Radio LAN (wireless Ethernet-like Local Area Network) using the + radio frequencies 900 MHz and 2.4 GHz. + + If you want to use an ISA WaveLAN card under Linux, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Some more specific + information is contained in + <file:Documentation/networking/wavelan.txt> and in the source code + <file:drivers/net/wireless/wavelan.p.h>. + + You will also need the wireless tools package available from + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + Please read the man pages contained therein. + + To compile this driver as a module, choose M here: the module will be + called wavelan. + +config PCMCIA_WAVELAN + tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support" + depends on PCMCIA + select WIRELESS_EXT + select WEXT_SPY + select WEXT_PRIV + help + Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA + (PC-card) wireless Ethernet networking card to your computer. This + driver is for the non-IEEE-802.11 Wavelan cards. + + To compile this driver as a module, choose M here: the module will be + called wavelan_cs. If unsure, say N. diff --git a/drivers/staging/wavelan/Makefile b/drivers/staging/wavelan/Makefile new file mode 100644 index 000000000000..1cde17c69a43 --- /dev/null +++ b/drivers/staging/wavelan/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_WAVELAN) += wavelan.o +obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan_cs.o diff --git a/drivers/staging/wavelan/TODO b/drivers/staging/wavelan/TODO new file mode 100644 index 000000000000..9bd15a2f6d9e --- /dev/null +++ b/drivers/staging/wavelan/TODO @@ -0,0 +1,7 @@ +TODO: + - step up and maintain this driver to ensure that it continues + to work. Having the hardware for this is pretty much a + requirement. If this does not happen, the will be removed in + the 2.6.35 kernel release. + +Please send patches to Greg Kroah-Hartman <greg@kroah.com>. diff --git a/drivers/net/wireless/i82586.h b/drivers/staging/wavelan/i82586.h index 5f65b250646f..5f65b250646f 100644 --- a/drivers/net/wireless/i82586.h +++ b/drivers/staging/wavelan/i82586.h diff --git a/drivers/net/wireless/i82593.h b/drivers/staging/wavelan/i82593.h index afac5c7a323d..afac5c7a323d 100644 --- a/drivers/net/wireless/i82593.h +++ b/drivers/staging/wavelan/i82593.h diff --git a/drivers/net/wireless/wavelan.c b/drivers/staging/wavelan/wavelan.c index d634b2da3b84..d634b2da3b84 100644 --- a/drivers/net/wireless/wavelan.c +++ b/drivers/staging/wavelan/wavelan.c diff --git a/drivers/net/wireless/wavelan.h b/drivers/staging/wavelan/wavelan.h index 9ab360558ffd..9ab360558ffd 100644 --- a/drivers/net/wireless/wavelan.h +++ b/drivers/staging/wavelan/wavelan.h diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/staging/wavelan/wavelan.p.h index dbe8de6e5f52..dbe8de6e5f52 100644 --- a/drivers/net/wireless/wavelan.p.h +++ b/drivers/staging/wavelan/wavelan.p.h diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/staging/wavelan/wavelan_cs.c index 431a20ec6db6..431a20ec6db6 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/staging/wavelan/wavelan_cs.c diff --git a/drivers/net/wireless/wavelan_cs.h b/drivers/staging/wavelan/wavelan_cs.h index 2e4bfe4147c6..2e4bfe4147c6 100644 --- a/drivers/net/wireless/wavelan_cs.h +++ b/drivers/staging/wavelan/wavelan_cs.h diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/staging/wavelan/wavelan_cs.p.h index 81d91531c4f9..81d91531c4f9 100644 --- a/drivers/net/wireless/wavelan_cs.p.h +++ b/drivers/staging/wavelan/wavelan_cs.p.h diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 52e15e079c61..0aa831467493 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -472,7 +472,7 @@ static inline int ieee80211_is_cfendack(__le16 fc) } /** - * ieee80211_is_nullfunc - check if FTYPE=IEEE80211_FTYPE_DATA and STYPE=IEEE80211_STYPE_NULLFUNC + * ieee80211_is_nullfunc - check if frame is a regular (non-QoS) nullfunc frame * @fc: frame control bytes in little-endian byteorder */ static inline int ieee80211_is_nullfunc(__le16 fc) @@ -481,6 +481,16 @@ static inline int ieee80211_is_nullfunc(__le16 fc) cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC); } +/** + * ieee80211_is_qos_nullfunc - check if frame is a QoS nullfunc frame + * @fc: frame control bytes in little-endian byteorder + */ +static inline int ieee80211_is_qos_nullfunc(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC); +} + struct ieee80211s_hdr { u8 flags; u8 ttl; diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h index 23c3f3d97779..9d3d86aaccbb 100644 --- a/include/net/ieee80211_radiotap.h +++ b/include/net/ieee80211_radiotap.h @@ -80,7 +80,7 @@ struct ieee80211_radiotap_header { * Additional extensions are made * by setting bit 31. */ -}; +} __packed; /* Name Data type Units * ---- --------- ----- diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c42c4a820b89..2c10eac637d8 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -494,7 +494,6 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * @RX_FLAG_MMIC_ERROR: Michael MIC error was reported on this frame. * Use together with %RX_FLAG_MMIC_STRIPPED. * @RX_FLAG_DECRYPTED: This frame was decrypted in hardware. - * @RX_FLAG_RADIOTAP: This frame starts with a radiotap header. * @RX_FLAG_MMIC_STRIPPED: the Michael MIC is stripped off this frame, * verification has been done by the hardware. * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame. @@ -515,7 +514,6 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = 1<<0, RX_FLAG_DECRYPTED = 1<<1, - RX_FLAG_RADIOTAP = 1<<2, RX_FLAG_MMIC_STRIPPED = 1<<3, RX_FLAG_IV_STRIPPED = 1<<4, RX_FLAG_FAILED_FCS_CRC = 1<<5, @@ -554,7 +552,7 @@ struct ieee80211_rx_status { int freq; int signal; int noise; - int qual; + int __deprecated qual; int antenna; int rate_idx; int flag; @@ -565,7 +563,9 @@ struct ieee80211_rx_status { * * Flags to define PHY configuration options * - * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported) + * @IEEE80211_CONF_MONITOR: there's a monitor interface present -- use this + * to determine for example whether to calculate timestamps for packets + * or not, do not use instead of filter flags! * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only) * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set * the driver should be prepared to handle configuration requests but @@ -574,7 +574,7 @@ struct ieee80211_rx_status { * it can also be unset in that case when monitor interfaces are active. */ enum ieee80211_conf_flags { - IEEE80211_CONF_RADIOTAP = (1<<0), + IEEE80211_CONF_MONITOR = (1<<0), IEEE80211_CONF_PS = (1<<1), IEEE80211_CONF_IDLE = (1<<2), }; @@ -584,7 +584,7 @@ enum ieee80211_conf_flags { * enum ieee80211_conf_changed - denotes which configuration changed * * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed - * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed + * @IEEE80211_CONF_CHANGE_MONITOR: the monitor flag changed * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed * @IEEE80211_CONF_CHANGE_POWER: the TX power changed * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed @@ -593,7 +593,7 @@ enum ieee80211_conf_flags { */ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), - IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3), + IEEE80211_CONF_CHANGE_MONITOR = BIT(3), IEEE80211_CONF_CHANGE_PS = BIT(4), IEEE80211_CONF_CHANGE_POWER = BIT(5), IEEE80211_CONF_CHANGE_CHANNEL = BIT(6), @@ -1661,8 +1661,7 @@ void ieee80211_restart_hw(struct ieee80211_hw *hw); * ieee80211_rx - receive frame * * Use this function to hand received frames to mac80211. The receive - * buffer in @skb must start with an IEEE 802.11 header or a radiotap - * header if %RX_FLAG_RADIOTAP is set in the @status flags. + * buffer in @skb must start with an IEEE 802.11 header. * * This function may not be called in IRQ context. Calls to this function * for a single hardware must be synchronized against each other. Calls to @@ -1744,19 +1743,45 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb); /** - * ieee80211_beacon_get - beacon generation function + * ieee80211_beacon_get_tim - beacon generation function * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * @tim_offset: pointer to variable that will receive the TIM IE offset. + * Set to 0 if invalid (in non-AP modes). + * @tim_length: pointer to variable that will receive the TIM IE length, + * (including the ID and length bytes!). + * Set to 0 if invalid (in non-AP modes). + * + * If the driver implements beaconing modes, it must use this function to + * obtain the beacon frame/template. * * If the beacon frames are generated by the host system (i.e., not in - * hardware/firmware), the low-level driver uses this function to receive - * the next beacon frame from the 802.11 code. The low-level is responsible - * for calling this function before beacon data is needed (e.g., based on - * hardware interrupt). Returned skb is used only once and low-level driver - * is responsible for freeing it. + * hardware/firmware), the driver uses this function to get each beacon + * frame from mac80211 -- it is responsible for calling this function + * before the beacon is needed (e.g. based on hardware interrupt). + * + * If the beacon frames are generated by the device, then the driver + * must use the returned beacon as the template and change the TIM IE + * according to the current DTIM parameters/TIM bitmap. + * + * The driver is responsible for freeing the returned skb. + */ +struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + u16 *tim_offset, u16 *tim_length); + +/** + * ieee80211_beacon_get - beacon generation function + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. + * + * See ieee80211_beacon_get_tim(). */ -struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, - struct ieee80211_vif *vif); +static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + return ieee80211_beacon_get_tim(hw, vif, NULL, NULL); +} /** * ieee80211_rts_get - RTS frame generation function @@ -2081,16 +2106,69 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, /** * ieee80211_find_sta - find a station * - * @hw: pointer as obtained from ieee80211_alloc_hw() + * @vif: virtual interface to look for station on * @addr: station's address * * This function must be called under RCU lock and the * resulting pointer is only valid under RCU lock as well. */ -struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw, +struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif, const u8 *addr); /** + * ieee80211_find_sta_by_hw - find a station on hardware + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @addr: station's address + * + * This function must be called under RCU lock and the + * resulting pointer is only valid under RCU lock as well. + * + * NOTE: This function should not be used! When mac80211 is converted + * internally to properly keep track of stations on multiple + * virtual interfaces, it will not always know which station to + * return here since a single address might be used by multiple + * logical stations (e.g. consider a station connecting to another + * BSSID on the same AP hardware without disconnecting first). + * + * DO NOT USE THIS FUNCTION. + */ +struct ieee80211_sta *ieee80211_find_sta_by_hw(struct ieee80211_hw *hw, + const u8 *addr); + +/** + * ieee80211_sta_block_awake - block station from waking up + * @hw: the hardware + * @pubsta: the station + * @block: whether to block or unblock + * + * Some devices require that all frames that are on the queues + * for a specific station that went to sleep are flushed before + * a poll response or frames after the station woke up can be + * delivered to that it. Note that such frames must be rejected + * by the driver as filtered, with the appropriate status flag. + * + * This function allows implementing this mode in a race-free + * manner. + * + * To do this, a driver must keep track of the number of frames + * still enqueued for a specific station. If this number is not + * zero when the station goes to sleep, the driver must call + * this function to force mac80211 to consider the station to + * be asleep regardless of the station's actual state. Once the + * number of outstanding frames reaches zero, the driver must + * call this function again to unblock the station. That will + * cause mac80211 to be able to send ps-poll responses, and if + * the station queried in the meantime then frames will also + * be sent out as a result of this. Additionally, the driver + * will be notified that the station woke up some time after + * it is unblocked, regardless of whether the station actually + * woke up while blocked or not. + */ +void ieee80211_sta_block_awake(struct ieee80211_hw *hw, + struct ieee80211_sta *pubsta, bool block); + +/** * ieee80211_beacon_loss - inform hardware does not receive beacons * * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 7b5131bd6fa1..56319b51d170 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -738,13 +738,6 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, err = sta_info_insert(sta); if (err) { - /* STA has been freed */ - if (err == -EEXIST && layer2_update) { - /* Need to update layer 2 devices on reassociation */ - sta = sta_info_get(local, mac); - if (sta) - ieee80211_send_layer2_update(sta); - } rcu_read_unlock(); return err; } diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index 96991b68f048..82c807723b6f 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -1,3 +1,4 @@ + /* * mac80211 debugfs for wireless PHYs * @@ -38,16 +39,10 @@ static const struct file_operations name## _ops = { \ }; #define DEBUGFS_ADD(name) \ - local->debugfs.name = debugfs_create_file(#name, 0400, phyd, \ - local, &name## _ops); + debugfs_create_file(#name, 0400, phyd, local, &name## _ops); #define DEBUGFS_ADD_MODE(name, mode) \ - local->debugfs.name = debugfs_create_file(#name, mode, phyd, \ - local, &name## _ops); - -#define DEBUGFS_DEL(name) \ - debugfs_remove(local->debugfs.name); \ - local->debugfs.name = NULL; + debugfs_create_file(#name, mode, phyd, local, &name## _ops); DEBUGFS_READONLY_FILE(frequency, 20, "%d", @@ -233,12 +228,7 @@ static const struct file_operations stats_ ##name## _ops = { \ }; #define DEBUGFS_STATS_ADD(name) \ - local->debugfs.stats.name = debugfs_create_file(#name, 0400, statsd,\ - local, &stats_ ##name## _ops); - -#define DEBUGFS_STATS_DEL(name) \ - debugfs_remove(local->debugfs.stats.name); \ - local->debugfs.stats.name = NULL; + debugfs_create_file(#name, 0400, statsd, local, &stats_ ##name## _ops); DEBUGFS_STATS_FILE(transmitted_fragment_count, 20, "%u", local->dot11TransmittedFragmentCount); @@ -326,7 +316,6 @@ void debugfs_hw_add(struct ieee80211_local *local) DEBUGFS_ADD(noack); statsd = debugfs_create_dir("statistics", phyd); - local->debugfs.statistics = statsd; /* if the dir failed, don't put all the other things into the root! */ if (!statsd) @@ -367,57 +356,3 @@ void debugfs_hw_add(struct ieee80211_local *local) DEBUGFS_STATS_ADD(dot11FCSErrorCount); DEBUGFS_STATS_ADD(dot11RTSSuccessCount); } - -void debugfs_hw_del(struct ieee80211_local *local) -{ - DEBUGFS_DEL(frequency); - DEBUGFS_DEL(total_ps_buffered); - DEBUGFS_DEL(wep_iv); - DEBUGFS_DEL(tsf); - DEBUGFS_DEL(queues); - DEBUGFS_DEL(reset); - DEBUGFS_DEL(noack); - - DEBUGFS_STATS_DEL(transmitted_fragment_count); - DEBUGFS_STATS_DEL(multicast_transmitted_frame_count); - DEBUGFS_STATS_DEL(failed_count); - DEBUGFS_STATS_DEL(retry_count); - DEBUGFS_STATS_DEL(multiple_retry_count); - DEBUGFS_STATS_DEL(frame_duplicate_count); - DEBUGFS_STATS_DEL(received_fragment_count); - DEBUGFS_STATS_DEL(multicast_received_frame_count); - DEBUGFS_STATS_DEL(transmitted_frame_count); - DEBUGFS_STATS_DEL(num_scans); -#ifdef CONFIG_MAC80211_DEBUG_COUNTERS - DEBUGFS_STATS_DEL(tx_handlers_drop); - DEBUGFS_STATS_DEL(tx_handlers_queued); - DEBUGFS_STATS_DEL(tx_handlers_drop_unencrypted); - DEBUGFS_STATS_DEL(tx_handlers_drop_fragment); - DEBUGFS_STATS_DEL(tx_handlers_drop_wep); - DEBUGFS_STATS_DEL(tx_handlers_drop_not_assoc); - DEBUGFS_STATS_DEL(tx_handlers_drop_unauth_port); - DEBUGFS_STATS_DEL(rx_handlers_drop); - DEBUGFS_STATS_DEL(rx_handlers_queued); - DEBUGFS_STATS_DEL(rx_handlers_drop_nullfunc); - DEBUGFS_STATS_DEL(rx_handlers_drop_defrag); - DEBUGFS_STATS_DEL(rx_handlers_drop_short); - DEBUGFS_STATS_DEL(rx_handlers_drop_passive_scan); - DEBUGFS_STATS_DEL(tx_expand_skb_head); - DEBUGFS_STATS_DEL(tx_expand_skb_head_cloned); - DEBUGFS_STATS_DEL(rx_expand_skb_head); - DEBUGFS_STATS_DEL(rx_expand_skb_head2); - DEBUGFS_STATS_DEL(rx_handlers_fragments); - DEBUGFS_STATS_DEL(tx_status_drop); -#endif - DEBUGFS_STATS_DEL(dot11ACKFailureCount); - DEBUGFS_STATS_DEL(dot11RTSFailureCount); - DEBUGFS_STATS_DEL(dot11FCSErrorCount); - DEBUGFS_STATS_DEL(dot11RTSSuccessCount); - - debugfs_remove(local->debugfs.statistics); - local->debugfs.statistics = NULL; - debugfs_remove(local->debugfs.stations); - local->debugfs.stations = NULL; - debugfs_remove(local->debugfs.keys); - local->debugfs.keys = NULL; -} diff --git a/net/mac80211/debugfs.h b/net/mac80211/debugfs.h index dd2541935c27..68e6a2050f9a 100644 --- a/net/mac80211/debugfs.h +++ b/net/mac80211/debugfs.h @@ -3,14 +3,12 @@ #ifdef CONFIG_MAC80211_DEBUGFS extern void debugfs_hw_add(struct ieee80211_local *local); -extern void debugfs_hw_del(struct ieee80211_local *local); extern int mac80211_open_file_generic(struct inode *inode, struct file *file); #else static inline void debugfs_hw_add(struct ieee80211_local *local) { return; } -static inline void debugfs_hw_del(struct ieee80211_local *local) {} #endif #endif /* __MAC80211_DEBUGFS_H */ diff --git a/net/mac80211/debugfs_key.c b/net/mac80211/debugfs_key.c index 99c752588b30..e0f5224630da 100644 --- a/net/mac80211/debugfs_key.c +++ b/net/mac80211/debugfs_key.c @@ -225,8 +225,8 @@ static ssize_t key_key_read(struct file *file, char __user *userbuf, KEY_OPS(key); #define DEBUGFS_ADD(name) \ - key->debugfs.name = debugfs_create_file(#name, 0400,\ - key->debugfs.dir, key, &key_##name##_ops); + debugfs_create_file(#name, 0400, key->debugfs.dir, \ + key, &key_##name##_ops); void ieee80211_debugfs_key_add(struct ieee80211_key *key) { @@ -271,30 +271,12 @@ void ieee80211_debugfs_key_add(struct ieee80211_key *key) DEBUGFS_ADD(ifindex); }; -#define DEBUGFS_DEL(name) \ - debugfs_remove(key->debugfs.name); key->debugfs.name = NULL; - void ieee80211_debugfs_key_remove(struct ieee80211_key *key) { if (!key) return; - DEBUGFS_DEL(keylen); - DEBUGFS_DEL(flags); - DEBUGFS_DEL(keyidx); - DEBUGFS_DEL(hw_key_idx); - DEBUGFS_DEL(tx_rx_count); - DEBUGFS_DEL(algorithm); - DEBUGFS_DEL(tx_spec); - DEBUGFS_DEL(rx_spec); - DEBUGFS_DEL(replays); - DEBUGFS_DEL(icverrors); - DEBUGFS_DEL(key); - DEBUGFS_DEL(ifindex); - - debugfs_remove(key->debugfs.stalink); - key->debugfs.stalink = NULL; - debugfs_remove(key->debugfs.dir); + debugfs_remove_recursive(key->debugfs.dir); key->debugfs.dir = NULL; } void ieee80211_debugfs_key_add_default(struct ieee80211_sub_if_data *sdata) @@ -302,7 +284,7 @@ void ieee80211_debugfs_key_add_default(struct ieee80211_sub_if_data *sdata) char buf[50]; struct ieee80211_key *key; - if (!sdata->debugfsdir) + if (!sdata->debugfs.dir) return; /* this is running under the key lock */ @@ -310,9 +292,9 @@ void ieee80211_debugfs_key_add_default(struct ieee80211_sub_if_data *sdata) key = sdata->default_key; if (key) { sprintf(buf, "../keys/%d", key->debugfs.cnt); - sdata->common_debugfs.default_key = + sdata->debugfs.default_key = debugfs_create_symlink("default_key", - sdata->debugfsdir, buf); + sdata->debugfs.dir, buf); } else ieee80211_debugfs_key_remove_default(sdata); } @@ -322,8 +304,8 @@ void ieee80211_debugfs_key_remove_default(struct ieee80211_sub_if_data *sdata) if (!sdata) return; - debugfs_remove(sdata->common_debugfs.default_key); - sdata->common_debugfs.default_key = NULL; + debugfs_remove(sdata->debugfs.default_key); + sdata->debugfs.default_key = NULL; } void ieee80211_debugfs_key_add_mgmt_default(struct ieee80211_sub_if_data *sdata) @@ -331,7 +313,7 @@ void ieee80211_debugfs_key_add_mgmt_default(struct ieee80211_sub_if_data *sdata) char buf[50]; struct ieee80211_key *key; - if (!sdata->debugfsdir) + if (!sdata->debugfs.dir) return; /* this is running under the key lock */ @@ -339,9 +321,9 @@ void ieee80211_debugfs_key_add_mgmt_default(struct ieee80211_sub_if_data *sdata) key = sdata->default_mgmt_key; if (key) { sprintf(buf, "../keys/%d", key->debugfs.cnt); - sdata->common_debugfs.default_mgmt_key = + sdata->debugfs.default_mgmt_key = debugfs_create_symlink("default_mgmt_key", - sdata->debugfsdir, buf); + sdata->debugfs.dir, buf); } else ieee80211_debugfs_key_remove_mgmt_default(sdata); } @@ -351,8 +333,8 @@ void ieee80211_debugfs_key_remove_mgmt_default(struct ieee80211_sub_if_data *sda if (!sdata) return; - debugfs_remove(sdata->common_debugfs.default_mgmt_key); - sdata->common_debugfs.default_mgmt_key = NULL; + debugfs_remove(sdata->debugfs.default_mgmt_key); + sdata->debugfs.default_mgmt_key = NULL; } void ieee80211_debugfs_key_sta_del(struct ieee80211_key *key, diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index 61234e79022b..8782264f49e7 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -152,9 +152,9 @@ IEEE80211_IF_FILE(min_discovery_timeout, #endif -#define DEBUGFS_ADD(name, type)\ - sdata->debugfs.type.name = debugfs_create_file(#name, 0400,\ - sdata->debugfsdir, sdata, &name##_ops); +#define DEBUGFS_ADD(name, type) \ + debugfs_create_file(#name, 0400, sdata->debugfs.dir, \ + sdata, &name##_ops); static void add_sta_files(struct ieee80211_sub_if_data *sdata) { @@ -199,30 +199,32 @@ static void add_monitor_files(struct ieee80211_sub_if_data *sdata) } #ifdef CONFIG_MAC80211_MESH -#define MESHSTATS_ADD(name)\ - sdata->mesh_stats.name = debugfs_create_file(#name, 0400,\ - sdata->mesh_stats_dir, sdata, &name##_ops); static void add_mesh_stats(struct ieee80211_sub_if_data *sdata) { - sdata->mesh_stats_dir = debugfs_create_dir("mesh_stats", - sdata->debugfsdir); + struct dentry *dir = debugfs_create_dir("mesh_stats", + sdata->debugfs.dir); + +#define MESHSTATS_ADD(name)\ + debugfs_create_file(#name, 0400, dir, sdata, &name##_ops); + MESHSTATS_ADD(fwded_mcast); MESHSTATS_ADD(fwded_unicast); MESHSTATS_ADD(fwded_frames); MESHSTATS_ADD(dropped_frames_ttl); MESHSTATS_ADD(dropped_frames_no_route); MESHSTATS_ADD(estab_plinks); +#undef MESHSTATS_ADD } -#define MESHPARAMS_ADD(name)\ - sdata->mesh_config.name = debugfs_create_file(#name, 0600,\ - sdata->mesh_config_dir, sdata, &name##_ops); - static void add_mesh_config(struct ieee80211_sub_if_data *sdata) { - sdata->mesh_config_dir = debugfs_create_dir("mesh_config", - sdata->debugfsdir); + struct dentry *dir = debugfs_create_dir("mesh_config", + sdata->debugfs.dir); + +#define MESHPARAMS_ADD(name) \ + debugfs_create_file(#name, 0600, dir, sdata, &name##_ops); + MESHPARAMS_ADD(dot11MeshMaxRetries); MESHPARAMS_ADD(dot11MeshRetryTimeout); MESHPARAMS_ADD(dot11MeshConfirmTimeout); @@ -236,12 +238,14 @@ static void add_mesh_config(struct ieee80211_sub_if_data *sdata) MESHPARAMS_ADD(dot11MeshHWMPmaxPREQretries); MESHPARAMS_ADD(path_refresh_time); MESHPARAMS_ADD(min_discovery_timeout); + +#undef MESHPARAMS_ADD } #endif static void add_files(struct ieee80211_sub_if_data *sdata) { - if (!sdata->debugfsdir) + if (!sdata->debugfs.dir) return; switch (sdata->vif.type) { @@ -274,134 +278,6 @@ static void add_files(struct ieee80211_sub_if_data *sdata) } } -#define DEBUGFS_DEL(name, type) \ - do { \ - debugfs_remove(sdata->debugfs.type.name); \ - sdata->debugfs.type.name = NULL; \ - } while (0) - -static void del_sta_files(struct ieee80211_sub_if_data *sdata) -{ - DEBUGFS_DEL(drop_unencrypted, sta); - DEBUGFS_DEL(force_unicast_rateidx, sta); - DEBUGFS_DEL(max_ratectrl_rateidx, sta); - - DEBUGFS_DEL(bssid, sta); - DEBUGFS_DEL(aid, sta); - DEBUGFS_DEL(capab, sta); -} - -static void del_ap_files(struct ieee80211_sub_if_data *sdata) -{ - DEBUGFS_DEL(drop_unencrypted, ap); - DEBUGFS_DEL(force_unicast_rateidx, ap); - DEBUGFS_DEL(max_ratectrl_rateidx, ap); - - DEBUGFS_DEL(num_sta_ps, ap); - DEBUGFS_DEL(dtim_count, ap); - DEBUGFS_DEL(num_buffered_multicast, ap); -} - -static void del_wds_files(struct ieee80211_sub_if_data *sdata) -{ - DEBUGFS_DEL(drop_unencrypted, wds); - DEBUGFS_DEL(force_unicast_rateidx, wds); - DEBUGFS_DEL(max_ratectrl_rateidx, wds); - - DEBUGFS_DEL(peer, wds); -} - -static void del_vlan_files(struct ieee80211_sub_if_data *sdata) -{ - DEBUGFS_DEL(drop_unencrypted, vlan); - DEBUGFS_DEL(force_unicast_rateidx, vlan); - DEBUGFS_DEL(max_ratectrl_rateidx, vlan); -} - -static void del_monitor_files(struct ieee80211_sub_if_data *sdata) -{ -} - -#ifdef CONFIG_MAC80211_MESH -#define MESHSTATS_DEL(name) \ - do { \ - debugfs_remove(sdata->mesh_stats.name); \ - sdata->mesh_stats.name = NULL; \ - } while (0) - -static void del_mesh_stats(struct ieee80211_sub_if_data *sdata) -{ - MESHSTATS_DEL(fwded_mcast); - MESHSTATS_DEL(fwded_unicast); - MESHSTATS_DEL(fwded_frames); - MESHSTATS_DEL(dropped_frames_ttl); - MESHSTATS_DEL(dropped_frames_no_route); - MESHSTATS_DEL(estab_plinks); - debugfs_remove(sdata->mesh_stats_dir); - sdata->mesh_stats_dir = NULL; -} - -#define MESHPARAMS_DEL(name) \ - do { \ - debugfs_remove(sdata->mesh_config.name); \ - sdata->mesh_config.name = NULL; \ - } while (0) - -static void del_mesh_config(struct ieee80211_sub_if_data *sdata) -{ - MESHPARAMS_DEL(dot11MeshMaxRetries); - MESHPARAMS_DEL(dot11MeshRetryTimeout); - MESHPARAMS_DEL(dot11MeshConfirmTimeout); - MESHPARAMS_DEL(dot11MeshHoldingTimeout); - MESHPARAMS_DEL(dot11MeshTTL); - MESHPARAMS_DEL(auto_open_plinks); - MESHPARAMS_DEL(dot11MeshMaxPeerLinks); - MESHPARAMS_DEL(dot11MeshHWMPactivePathTimeout); - MESHPARAMS_DEL(dot11MeshHWMPpreqMinInterval); - MESHPARAMS_DEL(dot11MeshHWMPnetDiameterTraversalTime); - MESHPARAMS_DEL(dot11MeshHWMPmaxPREQretries); - MESHPARAMS_DEL(path_refresh_time); - MESHPARAMS_DEL(min_discovery_timeout); - debugfs_remove(sdata->mesh_config_dir); - sdata->mesh_config_dir = NULL; -} -#endif - -static void del_files(struct ieee80211_sub_if_data *sdata) -{ - if (!sdata->debugfsdir) - return; - - switch (sdata->vif.type) { - case NL80211_IFTYPE_MESH_POINT: -#ifdef CONFIG_MAC80211_MESH - del_mesh_stats(sdata); - del_mesh_config(sdata); -#endif - break; - case NL80211_IFTYPE_STATION: - del_sta_files(sdata); - break; - case NL80211_IFTYPE_ADHOC: - /* XXX */ - break; - case NL80211_IFTYPE_AP: - del_ap_files(sdata); - break; - case NL80211_IFTYPE_WDS: - del_wds_files(sdata); - break; - case NL80211_IFTYPE_MONITOR: - del_monitor_files(sdata); - break; - case NL80211_IFTYPE_AP_VLAN: - del_vlan_files(sdata); - break; - default: - break; - } -} - static int notif_registered; void ieee80211_debugfs_add_netdev(struct ieee80211_sub_if_data *sdata) @@ -412,16 +288,18 @@ void ieee80211_debugfs_add_netdev(struct ieee80211_sub_if_data *sdata) return; sprintf(buf, "netdev:%s", sdata->dev->name); - sdata->debugfsdir = debugfs_create_dir(buf, + sdata->debugfs.dir = debugfs_create_dir(buf, sdata->local->hw.wiphy->debugfsdir); add_files(sdata); } void ieee80211_debugfs_remove_netdev(struct ieee80211_sub_if_data *sdata) { - del_files(sdata); - debugfs_remove(sdata->debugfsdir); - sdata->debugfsdir = NULL; + if (!sdata->debugfs.dir) + return; + + debugfs_remove_recursive(sdata->debugfs.dir); + sdata->debugfs.dir = NULL; } static int netdev_notify(struct notifier_block *nb, @@ -444,7 +322,7 @@ static int netdev_notify(struct notifier_block *nb, sdata = IEEE80211_DEV_TO_SUB_IF(dev); - dir = sdata->debugfsdir; + dir = sdata->debugfs.dir; if (!dir) return 0; diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 33a2e892115b..f043c29070d7 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -57,7 +57,6 @@ STA_FILE(tx_filtered, tx_filtered_count, LU); STA_FILE(tx_retry_failed, tx_retry_failed, LU); STA_FILE(tx_retry_count, tx_retry_count, LU); STA_FILE(last_signal, last_signal, D); -STA_FILE(last_qual, last_qual, D); STA_FILE(last_noise, last_noise, D); STA_FILE(wep_weak_iv_count, wep_weak_iv_count, LU); @@ -67,10 +66,11 @@ static ssize_t sta_flags_read(struct file *file, char __user *userbuf, char buf[100]; struct sta_info *sta = file->private_data; u32 staflags = get_sta_flags(sta); - int res = scnprintf(buf, sizeof(buf), "%s%s%s%s%s%s%s%s", + int res = scnprintf(buf, sizeof(buf), "%s%s%s%s%s%s%s%s%s", staflags & WLAN_STA_AUTH ? "AUTH\n" : "", staflags & WLAN_STA_ASSOC ? "ASSOC\n" : "", - staflags & WLAN_STA_PS ? "PS\n" : "", + staflags & WLAN_STA_PS_STA ? "PS (sta)\n" : "", + staflags & WLAN_STA_PS_DRIVER ? "PS (driver)\n" : "", staflags & WLAN_STA_AUTHORIZED ? "AUTHORIZED\n" : "", staflags & WLAN_STA_SHORT_PREAMBLE ? "SHORT PREAMBLE\n" : "", staflags & WLAN_STA_WME ? "WME\n" : "", @@ -158,13 +158,9 @@ static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf, STA_OPS(agg_status); #define DEBUGFS_ADD(name) \ - sta->debugfs.name = debugfs_create_file(#name, 0400, \ + debugfs_create_file(#name, 0400, \ sta->debugfs.dir, sta, &sta_ ##name## _ops); -#define DEBUGFS_DEL(name) \ - debugfs_remove(sta->debugfs.name);\ - sta->debugfs.name = NULL; - void ieee80211_sta_debugfs_add(struct sta_info *sta) { @@ -209,36 +205,12 @@ void ieee80211_sta_debugfs_add(struct sta_info *sta) DEBUGFS_ADD(tx_retry_failed); DEBUGFS_ADD(tx_retry_count); DEBUGFS_ADD(last_signal); - DEBUGFS_ADD(last_qual); DEBUGFS_ADD(last_noise); DEBUGFS_ADD(wep_weak_iv_count); } void ieee80211_sta_debugfs_remove(struct sta_info *sta) { - DEBUGFS_DEL(flags); - DEBUGFS_DEL(num_ps_buf_frames); - DEBUGFS_DEL(inactive_ms); - DEBUGFS_DEL(last_seq_ctrl); - DEBUGFS_DEL(agg_status); - DEBUGFS_DEL(aid); - DEBUGFS_DEL(dev); - DEBUGFS_DEL(rx_packets); - DEBUGFS_DEL(tx_packets); - DEBUGFS_DEL(rx_bytes); - DEBUGFS_DEL(tx_bytes); - DEBUGFS_DEL(rx_duplicates); - DEBUGFS_DEL(rx_fragments); - DEBUGFS_DEL(rx_dropped); - DEBUGFS_DEL(tx_fragments); - DEBUGFS_DEL(tx_filtered); - DEBUGFS_DEL(tx_retry_failed); - DEBUGFS_DEL(tx_retry_count); - DEBUGFS_DEL(last_signal); - DEBUGFS_DEL(last_qual); - DEBUGFS_DEL(last_noise); - DEBUGFS_DEL(wep_weak_iv_count); - - debugfs_remove(sta->debugfs.dir); + debugfs_remove_recursive(sta->debugfs.dir); sta->debugfs.dir = NULL; } diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index f1362f32c17d..fbffce90edbc 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -455,6 +455,10 @@ static void ieee80211_sta_merge_ibss(struct ieee80211_sub_if_data *sdata) ieee80211_sta_expire(sdata, IEEE80211_IBSS_INACTIVITY_LIMIT); + if (time_before(jiffies, ifibss->last_scan_completed + + IEEE80211_IBSS_MERGE_INTERVAL)) + return; + if (ieee80211_sta_active_ibss(sdata)) return; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 588005c84a6d..1ef767366b77 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -176,7 +176,6 @@ struct ieee80211_rx_data { struct ieee80211_rate *rate; unsigned int flags; - int sent_ps_buffered; int queue; u32 tkip_iv32; u16 tkip_iv16; @@ -471,74 +470,11 @@ struct ieee80211_sub_if_data { } u; #ifdef CONFIG_MAC80211_DEBUGFS - struct dentry *debugfsdir; - union { - struct { - struct dentry *drop_unencrypted; - struct dentry *bssid; - struct dentry *aid; - struct dentry *capab; - struct dentry *force_unicast_rateidx; - struct dentry *max_ratectrl_rateidx; - } sta; - struct { - struct dentry *drop_unencrypted; - struct dentry *num_sta_ps; - struct dentry *dtim_count; - struct dentry *force_unicast_rateidx; - struct dentry *max_ratectrl_rateidx; - struct dentry *num_buffered_multicast; - } ap; - struct { - struct dentry *drop_unencrypted; - struct dentry *peer; - struct dentry *force_unicast_rateidx; - struct dentry *max_ratectrl_rateidx; - } wds; - struct { - struct dentry *drop_unencrypted; - struct dentry *force_unicast_rateidx; - struct dentry *max_ratectrl_rateidx; - } vlan; - struct { - struct dentry *mode; - } monitor; - } debugfs; struct { + struct dentry *dir; struct dentry *default_key; struct dentry *default_mgmt_key; - } common_debugfs; - -#ifdef CONFIG_MAC80211_MESH - struct dentry *mesh_stats_dir; - struct { - struct dentry *fwded_mcast; - struct dentry *fwded_unicast; - struct dentry *fwded_frames; - struct dentry *dropped_frames_ttl; - struct dentry *dropped_frames_no_route; - struct dentry *estab_plinks; - struct timer_list mesh_path_timer; - } mesh_stats; - - struct dentry *mesh_config_dir; - struct { - struct dentry *dot11MeshRetryTimeout; - struct dentry *dot11MeshConfirmTimeout; - struct dentry *dot11MeshHoldingTimeout; - struct dentry *dot11MeshMaxRetries; - struct dentry *dot11MeshTTL; - struct dentry *auto_open_plinks; - struct dentry *dot11MeshMaxPeerLinks; - struct dentry *dot11MeshHWMPactivePathTimeout; - struct dentry *dot11MeshHWMPpreqMinInterval; - struct dentry *dot11MeshHWMPnetDiameterTraversalTime; - struct dentry *dot11MeshHWMPmaxPREQretries; - struct dentry *path_refresh_time; - struct dentry *min_discovery_timeout; - } mesh_config; -#endif - + } debugfs; #endif /* must be last, dynamically sized area in this! */ struct ieee80211_vif vif; @@ -730,10 +666,9 @@ struct ieee80211_local { unsigned long scanning; struct cfg80211_ssid scan_ssid; struct cfg80211_scan_request *int_scan_req; - struct cfg80211_scan_request *scan_req; + struct cfg80211_scan_request *scan_req, *hw_scan_req; struct ieee80211_channel *scan_channel; - const u8 *orig_ies; - int orig_ies_len; + enum ieee80211_band hw_scan_band; int scan_channel_idx; int scan_ies_len; @@ -818,53 +753,6 @@ struct ieee80211_local { #ifdef CONFIG_MAC80211_DEBUGFS struct local_debugfsdentries { struct dentry *rcdir; - struct dentry *rcname; - struct dentry *frequency; - struct dentry *total_ps_buffered; - struct dentry *wep_iv; - struct dentry *tsf; - struct dentry *queues; - struct dentry *reset; - struct dentry *noack; - struct dentry *statistics; - struct local_debugfsdentries_statsdentries { - struct dentry *transmitted_fragment_count; - struct dentry *multicast_transmitted_frame_count; - struct dentry *failed_count; - struct dentry *retry_count; - struct dentry *multiple_retry_count; - struct dentry *frame_duplicate_count; - struct dentry *received_fragment_count; - struct dentry *multicast_received_frame_count; - struct dentry *transmitted_frame_count; - struct dentry *wep_undecryptable_count; - struct dentry *num_scans; -#ifdef CONFIG_MAC80211_DEBUG_COUNTERS - struct dentry *tx_handlers_drop; - struct dentry *tx_handlers_queued; - struct dentry *tx_handlers_drop_unencrypted; - struct dentry *tx_handlers_drop_fragment; - struct dentry *tx_handlers_drop_wep; - struct dentry *tx_handlers_drop_not_assoc; - struct dentry *tx_handlers_drop_unauth_port; - struct dentry *rx_handlers_drop; - struct dentry *rx_handlers_queued; - struct dentry *rx_handlers_drop_nullfunc; - struct dentry *rx_handlers_drop_defrag; - struct dentry *rx_handlers_drop_short; - struct dentry *rx_handlers_drop_passive_scan; - struct dentry *tx_expand_skb_head; - struct dentry *tx_expand_skb_head_cloned; - struct dentry *rx_expand_skb_head; - struct dentry *rx_expand_skb_head2; - struct dentry *rx_handlers_fragments; - struct dentry *tx_status_drop; -#endif - struct dentry *dot11ACKFailureCount; - struct dentry *dot11RTSFailureCount; - struct dentry *dot11FCSErrorCount; - struct dentry *dot11RTSSuccessCount; - } stats; struct dentry *stations; struct dentry *keys; } debugfs; @@ -1160,7 +1048,8 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, u8 *extra, size_t extra_len, const u8 *bssid, const u8 *key, u8 key_len, u8 key_idx); int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer, - const u8 *ie, size_t ie_len); + const u8 *ie, size_t ie_len, + enum ieee80211_band band); void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 14f10eb91c5c..8495161b99b8 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -214,8 +214,8 @@ static int ieee80211_open(struct net_device *dev) /* must be before the call to ieee80211_configure_filter */ local->monitors++; if (local->monitors == 1) { - local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP; - hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP; + local->hw.conf.flags |= IEEE80211_CONF_MONITOR; + hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR; } if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL) @@ -435,8 +435,8 @@ static int ieee80211_stop(struct net_device *dev) local->monitors--; if (local->monitors == 0) { - local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP; - hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP; + local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR; + hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR; } if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL) diff --git a/net/mac80211/key.h b/net/mac80211/key.h index 9572e00f532c..a49f93b79e92 100644 --- a/net/mac80211/key.h +++ b/net/mac80211/key.h @@ -118,18 +118,6 @@ struct ieee80211_key { struct { struct dentry *stalink; struct dentry *dir; - struct dentry *keylen; - struct dentry *flags; - struct dentry *keyidx; - struct dentry *hw_key_idx; - struct dentry *tx_rx_count; - struct dentry *algorithm; - struct dentry *tx_spec; - struct dentry *rx_spec; - struct dentry *replays; - struct dentry *icverrors; - struct dentry *key; - struct dentry *ifindex; int cnt; } debugfs; #endif diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 797f53942e5f..beb8718d905e 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -385,13 +385,13 @@ static void ieee80211_handle_filtered_frame(struct ieee80211_local *local, * can be unknown, for example with different interrupt status * bits. */ - if (test_sta_flags(sta, WLAN_STA_PS) && + if (test_sta_flags(sta, WLAN_STA_PS_STA) && skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) { skb_queue_tail(&sta->tx_filtered, skb); return; } - if (!test_sta_flags(sta, WLAN_STA_PS) && + if (!test_sta_flags(sta, WLAN_STA_PS_STA) && !(info->flags & IEEE80211_TX_INTFL_RETRIED)) { /* Software retry the packet once */ info->flags |= IEEE80211_TX_INTFL_RETRIED; @@ -406,7 +406,7 @@ static void ieee80211_handle_filtered_frame(struct ieee80211_local *local, "queue_len=%d PS=%d @%lu\n", wiphy_name(local->hw.wiphy), skb_queue_len(&sta->tx_filtered), - !!test_sta_flags(sta, WLAN_STA_PS), jiffies); + !!test_sta_flags(sta, WLAN_STA_PS_STA), jiffies); #endif dev_kfree_skb(skb); } @@ -446,7 +446,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) if (sta) { if (!(info->flags & IEEE80211_TX_STAT_ACK) && - test_sta_flags(sta, WLAN_STA_PS)) { + test_sta_flags(sta, WLAN_STA_PS_STA)) { /* * The STA is in power save mode, so assume * that this TX packet failed because of that. @@ -901,6 +901,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) i++; } } + local->int_scan_req->n_channels = i; local->network_latency_notifier.notifier_call = ieee80211_max_network_latency; @@ -923,7 +924,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) fail_wep: sta_info_stop(local); fail_sta_info: - debugfs_hw_del(local); destroy_workqueue(local->workqueue); fail_workqueue: wiphy_unregister(local->hw.wiphy); @@ -959,7 +959,6 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) ieee80211_clear_tx_pending(local); sta_info_stop(local); rate_control_deinitialize(local); - debugfs_hw_del(local); if (skb_queue_len(&local->skb_queue) || skb_queue_len(&local->skb_queue_unreliable)) diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index b33efc4fc267..ccda7454fb17 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -163,8 +163,7 @@ struct rate_control_ref *rate_control_alloc(const char *name, #ifdef CONFIG_MAC80211_DEBUGFS debugfsdir = debugfs_create_dir("rc", local->hw.wiphy->debugfsdir); local->debugfs.rcdir = debugfsdir; - local->debugfs.rcname = debugfs_create_file("name", 0400, debugfsdir, - ref, &rcname_ops); + debugfs_create_file("name", 0400, debugfsdir, ref, &rcname_ops); #endif ref->priv = ref->ops->alloc(&local->hw, debugfsdir); @@ -188,9 +187,7 @@ static void rate_control_release(struct kref *kref) ctrl_ref->ops->free(ctrl_ref->priv); #ifdef CONFIG_MAC80211_DEBUGFS - debugfs_remove(ctrl_ref->local->debugfs.rcname); - ctrl_ref->local->debugfs.rcname = NULL; - debugfs_remove(ctrl_ref->local->debugfs.rcdir); + debugfs_remove_recursive(ctrl_ref->local->debugfs.rcdir); ctrl_ref->local->debugfs.rcdir = NULL; #endif diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 5c385e3c1d1f..28316b2a585f 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -39,11 +39,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, * only useful for monitoring. */ static struct sk_buff *remove_monitor_info(struct ieee80211_local *local, - struct sk_buff *skb, - int rtap_len) + struct sk_buff *skb) { - skb_pull(skb, rtap_len); - if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) { if (likely(skb->len > FCS_LEN)) skb_trim(skb, skb->len - FCS_LEN); @@ -59,15 +56,14 @@ static struct sk_buff *remove_monitor_info(struct ieee80211_local *local, } static inline int should_drop_frame(struct sk_buff *skb, - int present_fcs_len, - int radiotap_len) + int present_fcs_len) { struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC)) return 1; - if (unlikely(skb->len < 16 + present_fcs_len + radiotap_len)) + if (unlikely(skb->len < 16 + present_fcs_len)) return 1; if (ieee80211_is_ctl(hdr->frame_control) && !ieee80211_is_pspoll(hdr->frame_control) && @@ -95,10 +91,6 @@ ieee80211_rx_radiotap_len(struct ieee80211_local *local, if (len & 1) /* padding for RX_FLAGS if necessary */ len++; - /* make sure radiotap starts at a naturally aligned address */ - if (len % 8) - len = roundup(len, 8); - return len; } @@ -116,6 +108,7 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local, struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); struct ieee80211_radiotap_header *rthdr; unsigned char *pos; + u16 rx_flags = 0; rthdr = (struct ieee80211_radiotap_header *)skb_push(skb, rtap_len); memset(rthdr, 0, rtap_len); @@ -134,7 +127,7 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local, /* IEEE80211_RADIOTAP_TSFT */ if (status->flag & RX_FLAG_TSFT) { - *(__le64 *)pos = cpu_to_le64(status->mactime); + put_unaligned_le64(status->mactime, pos); rthdr->it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_TSFT); pos += 8; @@ -166,17 +159,17 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local, pos++; /* IEEE80211_RADIOTAP_CHANNEL */ - *(__le16 *)pos = cpu_to_le16(status->freq); + put_unaligned_le16(status->freq, pos); pos += 2; if (status->band == IEEE80211_BAND_5GHZ) - *(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_OFDM | - IEEE80211_CHAN_5GHZ); + put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ, + pos); else if (rate->flags & IEEE80211_RATE_ERP_G) - *(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_OFDM | - IEEE80211_CHAN_2GHZ); + put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ, + pos); else - *(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_CCK | - IEEE80211_CHAN_2GHZ); + put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ, + pos); pos += 2; /* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */ @@ -205,10 +198,11 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local, /* IEEE80211_RADIOTAP_RX_FLAGS */ /* ensure 2 byte alignment for the 2 byte field as required */ - if ((pos - (unsigned char *)rthdr) & 1) + if ((pos - (u8 *)rthdr) & 1) pos++; if (status->flag & RX_FLAG_FAILED_PLCP_CRC) - *(__le16 *)pos |= cpu_to_le16(IEEE80211_RADIOTAP_F_RX_BADPLCP); + rx_flags |= IEEE80211_RADIOTAP_F_RX_BADPLCP; + put_unaligned_le16(rx_flags, pos); pos += 2; } @@ -227,7 +221,6 @@ ieee80211_rx_monitor(struct ieee80211_local *local, struct sk_buff *origskb, struct sk_buff *skb, *skb2; struct net_device *prev_dev = NULL; int present_fcs_len = 0; - int rtap_len = 0; /* * First, we may need to make a copy of the skb because @@ -237,25 +230,23 @@ ieee80211_rx_monitor(struct ieee80211_local *local, struct sk_buff *origskb, * We don't need to, of course, if we aren't going to return * the SKB because it has a bad FCS/PLCP checksum. */ - if (status->flag & RX_FLAG_RADIOTAP) - rtap_len = ieee80211_get_radiotap_len(origskb->data); - else - /* room for the radiotap header based on driver features */ - needed_headroom = ieee80211_rx_radiotap_len(local, status); + + /* room for the radiotap header based on driver features */ + needed_headroom = ieee80211_rx_radiotap_len(local, status); if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) present_fcs_len = FCS_LEN; if (!local->monitors) { - if (should_drop_frame(origskb, present_fcs_len, rtap_len)) { + if (should_drop_frame(origskb, present_fcs_len)) { dev_kfree_skb(origskb); return NULL; } - return remove_monitor_info(local, origskb, rtap_len); + return remove_monitor_info(local, origskb); } - if (should_drop_frame(origskb, present_fcs_len, rtap_len)) { + if (should_drop_frame(origskb, present_fcs_len)) { /* only need to expand headroom if necessary */ skb = origskb; origskb = NULL; @@ -279,16 +270,14 @@ ieee80211_rx_monitor(struct ieee80211_local *local, struct sk_buff *origskb, */ skb = skb_copy_expand(origskb, needed_headroom, 0, GFP_ATOMIC); - origskb = remove_monitor_info(local, origskb, rtap_len); + origskb = remove_monitor_info(local, origskb); if (!skb) return origskb; } - /* if necessary, prepend radiotap information */ - if (!(status->flag & RX_FLAG_RADIOTAP)) - ieee80211_add_rx_radiotap_header(local, skb, rate, - needed_headroom); + /* prepend radiotap information */ + ieee80211_add_rx_radiotap_header(local, skb, rate, needed_headroom); skb_reset_mac_header(skb); skb->ip_summed = CHECKSUM_UNNECESSARY; @@ -792,7 +781,7 @@ static void ap_sta_ps_start(struct sta_info *sta) struct ieee80211_local *local = sdata->local; atomic_inc(&sdata->bss->num_sta_ps); - set_sta_flags(sta, WLAN_STA_PS); + set_sta_flags(sta, WLAN_STA_PS_STA); drv_sta_notify(local, &sdata->vif, STA_NOTIFY_SLEEP, &sta->sta); #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG printk(KERN_DEBUG "%s: STA %pM aid %d enters power save mode\n", @@ -800,38 +789,28 @@ static void ap_sta_ps_start(struct sta_info *sta) #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ } -static int ap_sta_ps_end(struct sta_info *sta) +static void ap_sta_ps_end(struct sta_info *sta) { struct ieee80211_sub_if_data *sdata = sta->sdata; - struct ieee80211_local *local = sdata->local; - int sent, buffered; atomic_dec(&sdata->bss->num_sta_ps); - clear_sta_flags(sta, WLAN_STA_PS); - drv_sta_notify(local, &sdata->vif, STA_NOTIFY_AWAKE, &sta->sta); - - if (!skb_queue_empty(&sta->ps_tx_buf)) - sta_info_clear_tim_bit(sta); + clear_sta_flags(sta, WLAN_STA_PS_STA); #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG printk(KERN_DEBUG "%s: STA %pM aid %d exits power save mode\n", sdata->dev->name, sta->sta.addr, sta->sta.aid); #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ - /* Send all buffered frames to the station */ - sent = ieee80211_add_pending_skbs(local, &sta->tx_filtered); - buffered = ieee80211_add_pending_skbs(local, &sta->ps_tx_buf); - sent += buffered; - local->total_ps_buffered -= buffered; - + if (test_sta_flags(sta, WLAN_STA_PS_DRIVER)) { #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG - printk(KERN_DEBUG "%s: STA %pM aid %d sending %d filtered/%d PS frames " - "since STA not sleeping anymore\n", sdata->dev->name, - sta->sta.addr, sta->sta.aid, sent - buffered, buffered); + printk(KERN_DEBUG "%s: STA %pM aid %d driver-ps-blocked\n", + sdata->dev->name, sta->sta.addr, sta->sta.aid); #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ + return; + } - return sent; + ieee80211_sta_ps_deliver_wakeup(sta); } static ieee80211_rx_result debug_noinline @@ -870,7 +849,6 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx) sta->rx_fragments++; sta->rx_bytes += rx->skb->len; sta->last_signal = rx->status->signal; - sta->last_qual = rx->status->qual; sta->last_noise = rx->status->noise; /* @@ -880,7 +858,7 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx) if (!ieee80211_has_morefrags(hdr->frame_control) && (rx->sdata->vif.type == NL80211_IFTYPE_AP || rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) { - if (test_sta_flags(sta, WLAN_STA_PS)) { + if (test_sta_flags(sta, WLAN_STA_PS_STA)) { /* * Ignore doze->wake transitions that are * indicated by non-data frames, the standard @@ -891,19 +869,24 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx) */ if (ieee80211_is_data(hdr->frame_control) && !ieee80211_has_pm(hdr->frame_control)) - rx->sent_ps_buffered += ap_sta_ps_end(sta); + ap_sta_ps_end(sta); } else { if (ieee80211_has_pm(hdr->frame_control)) ap_sta_ps_start(sta); } } - /* Drop data::nullfunc frames silently, since they are used only to - * control station power saving mode. */ - if (ieee80211_is_nullfunc(hdr->frame_control)) { + /* + * Drop (qos-)data::nullfunc frames silently, since they + * are used only to control station power saving mode. + */ + if (ieee80211_is_nullfunc(hdr->frame_control) || + ieee80211_is_qos_nullfunc(hdr->frame_control)) { I802_DEBUG_INC(rx->local->rx_handlers_drop_nullfunc); - /* Update counter and free packet here to avoid counting this - * as a dropped packed. */ + /* + * Update counter and free packet here to avoid + * counting this as a dropped packed. + */ sta->rx_packets++; dev_kfree_skb(rx->skb); return RX_QUEUED; @@ -1103,9 +1086,7 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx) static ieee80211_rx_result debug_noinline ieee80211_rx_h_ps_poll(struct ieee80211_rx_data *rx) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev); - struct sk_buff *skb; - int no_pending_pkts; + struct ieee80211_sub_if_data *sdata = rx->sdata; __le16 fc = ((struct ieee80211_hdr *)rx->skb->data)->frame_control; if (likely(!rx->sta || !ieee80211_is_pspoll(fc) || @@ -1116,56 +1097,10 @@ ieee80211_rx_h_ps_poll(struct ieee80211_rx_data *rx) (sdata->vif.type != NL80211_IFTYPE_AP_VLAN)) return RX_DROP_UNUSABLE; - skb = skb_dequeue(&rx->sta->tx_filtered); - if (!skb) { - skb = skb_dequeue(&rx->sta->ps_tx_buf); - if (skb) - rx->local->total_ps_buffered--; - } - no_pending_pkts = skb_queue_empty(&rx->sta->tx_filtered) && - skb_queue_empty(&rx->sta->ps_tx_buf); - - if (skb) { - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_hdr *hdr = - (struct ieee80211_hdr *) skb->data; - - /* - * Tell TX path to send this frame even though the STA may - * still remain is PS mode after this frame exchange. - */ - info->flags |= IEEE80211_TX_CTL_PSPOLL_RESPONSE; - -#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG - printk(KERN_DEBUG "STA %pM aid %d: PS Poll (entries after %d)\n", - rx->sta->sta.addr, rx->sta->sta.aid, - skb_queue_len(&rx->sta->ps_tx_buf)); -#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ - - /* Use MoreData flag to indicate whether there are more - * buffered frames for this STA */ - if (no_pending_pkts) - hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREDATA); - else - hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA); - - ieee80211_add_pending_skb(rx->local, skb); - - if (no_pending_pkts) - sta_info_clear_tim_bit(rx->sta); -#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG - } else if (!rx->sent_ps_buffered) { - /* - * FIXME: This can be the result of a race condition between - * us expiring a frame and the station polling for it. - * Should we send it a null-func frame indicating we - * have nothing buffered for it? - */ - printk(KERN_DEBUG "%s: STA %pM sent PS Poll even " - "though there are no buffered frames for it\n", - rx->dev->name, rx->sta->sta.addr); -#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ - } + if (!test_sta_flags(rx->sta, WLAN_STA_PS_DRIVER)) + ieee80211_sta_ps_deliver_poll_response(rx->sta); + else + set_sta_flags(rx->sta, WLAN_STA_PSPOLL); /* Free PS Poll skb here instead of returning RX_DROP that would * count as an dropped frame. */ @@ -1337,10 +1272,10 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx) skb = NULL; } else { u8 *data = skb->data; - size_t len = skb->len; - u8 *new = __skb_push(skb, align); - memmove(new, data, len); - __skb_trim(skb, len); + size_t len = skb_headlen(skb); + skb->data -= align; + memmove(skb->data, data, len); + skb_set_tail_pointer(skb, len); } } #endif diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 7a350d2690a0..4cf387c944bf 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -12,8 +12,6 @@ * published by the Free Software Foundation. */ -/* TODO: figure out how to avoid that the "current BSS" expires */ - #include <linux/wireless.h> #include <linux/if_arp.h> #include <linux/rtnetlink.h> @@ -189,6 +187,39 @@ ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) return RX_QUEUED; } +/* return false if no more work */ +static bool ieee80211_prep_hw_scan(struct ieee80211_local *local) +{ + struct cfg80211_scan_request *req = local->scan_req; + enum ieee80211_band band; + int i, ielen, n_chans; + + do { + if (local->hw_scan_band == IEEE80211_NUM_BANDS) + return false; + + band = local->hw_scan_band; + n_chans = 0; + for (i = 0; i < req->n_channels; i++) { + if (req->channels[i]->band == band) { + local->hw_scan_req->channels[n_chans] = + req->channels[i]; + n_chans++; + } + } + + local->hw_scan_band++; + } while (!n_chans); + + local->hw_scan_req->n_channels = n_chans; + + ielen = ieee80211_build_preq_ies(local, (u8 *)local->hw_scan_req->ie, + req->ie, req->ie_len, band); + local->hw_scan_req->ie_len = ielen; + + return true; +} + /* * inform AP that we will go to sleep so that it will buffer the frames * while we scan @@ -249,13 +280,6 @@ static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata) } } -static void ieee80211_restore_scan_ies(struct ieee80211_local *local) -{ - kfree(local->scan_req->ie); - local->scan_req->ie = local->orig_ies; - local->scan_req->ie_len = local->orig_ies_len; -} - void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) { struct ieee80211_local *local = hw_to_local(hw); @@ -264,25 +288,36 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) mutex_lock(&local->scan_mtx); - if (WARN_ON(!local->scanning)) { + /* + * It's ok to abort a not-yet-running scan (that + * we have one at all will be verified by checking + * local->scan_req next), but not to complete it + * successfully. + */ + if (WARN_ON(!local->scanning && !aborted)) + aborted = true; + + if (WARN_ON(!local->scan_req)) { mutex_unlock(&local->scan_mtx); return; } - if (WARN_ON(!local->scan_req)) { + was_hw_scan = test_bit(SCAN_HW_SCANNING, &local->scanning); + if (was_hw_scan && !aborted && ieee80211_prep_hw_scan(local)) { + ieee80211_queue_delayed_work(&local->hw, + &local->scan_work, 0); mutex_unlock(&local->scan_mtx); return; } - if (test_bit(SCAN_HW_SCANNING, &local->scanning)) - ieee80211_restore_scan_ies(local); + kfree(local->hw_scan_req); + local->hw_scan_req = NULL; if (local->scan_req != local->int_scan_req) cfg80211_scan_done(local->scan_req, aborted); local->scan_req = NULL; local->scan_sdata = NULL; - was_hw_scan = test_bit(SCAN_HW_SCANNING, &local->scanning); local->scanning = 0; local->scan_channel = NULL; @@ -394,19 +429,23 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, if (local->ops->hw_scan) { u8 *ies; - int ielen; - ies = kmalloc(2 + IEEE80211_MAX_SSID_LEN + - local->scan_ies_len + req->ie_len, GFP_KERNEL); - if (!ies) + local->hw_scan_req = kmalloc( + sizeof(*local->hw_scan_req) + + req->n_channels * sizeof(req->channels[0]) + + 2 + IEEE80211_MAX_SSID_LEN + local->scan_ies_len + + req->ie_len, GFP_KERNEL); + if (!local->hw_scan_req) return -ENOMEM; - ielen = ieee80211_build_preq_ies(local, ies, - req->ie, req->ie_len); - local->orig_ies = req->ie; - local->orig_ies_len = req->ie_len; - req->ie = ies; - req->ie_len = ielen; + local->hw_scan_req->ssids = req->ssids; + local->hw_scan_req->n_ssids = req->n_ssids; + ies = (u8 *)local->hw_scan_req + + sizeof(*local->hw_scan_req) + + req->n_channels * sizeof(req->channels[0]); + local->hw_scan_req->ie = ies; + + local->hw_scan_band = 0; } local->scan_req = req; @@ -438,16 +477,17 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, ieee80211_recalc_idle(local); mutex_unlock(&local->scan_mtx); - if (local->ops->hw_scan) - rc = drv_hw_scan(local, local->scan_req); - else + if (local->ops->hw_scan) { + WARN_ON(!ieee80211_prep_hw_scan(local)); + rc = drv_hw_scan(local, local->hw_scan_req); + } else rc = ieee80211_start_sw_scan(local); mutex_lock(&local->scan_mtx); if (rc) { - if (local->ops->hw_scan) - ieee80211_restore_scan_ies(local); + kfree(local->hw_scan_req); + local->hw_scan_req = NULL; local->scanning = 0; ieee80211_recalc_idle(local); @@ -574,23 +614,14 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local, { int skip; struct ieee80211_channel *chan; - struct ieee80211_sub_if_data *sdata = local->scan_sdata; skip = 0; chan = local->scan_req->channels[local->scan_channel_idx]; - if (chan->flags & IEEE80211_CHAN_DISABLED || - (sdata->vif.type == NL80211_IFTYPE_ADHOC && - chan->flags & IEEE80211_CHAN_NO_IBSS)) + local->scan_channel = chan; + if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL)) skip = 1; - if (!skip) { - local->scan_channel = chan; - if (ieee80211_hw_config(local, - IEEE80211_CONF_CHANGE_CHANNEL)) - skip = 1; - } - /* advance state machine to next channel/band */ local->scan_channel_idx++; @@ -656,6 +687,14 @@ void ieee80211_scan_work(struct work_struct *work) return; } + if (local->hw_scan_req) { + int rc = drv_hw_scan(local, local->hw_scan_req); + mutex_unlock(&local->scan_mtx); + if (rc) + ieee80211_scan_completed(&local->hw, true); + return; + } + if (local->scan_req && !local->scanning) { struct cfg80211_scan_request *req = local->scan_req; int rc; diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 594f2318c3d8..be59456e8a42 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -171,6 +171,8 @@ void sta_info_destroy(struct sta_info *sta) local = sta->local; + cancel_work_sync(&sta->drv_unblock_wk); + rate_control_remove_sta_debugfs(sta); ieee80211_sta_debugfs_remove(sta); @@ -259,6 +261,21 @@ static void sta_info_hash_add(struct ieee80211_local *local, rcu_assign_pointer(local->sta_hash[STA_HASH(sta->sta.addr)], sta); } +static void sta_unblock(struct work_struct *wk) +{ + struct sta_info *sta; + + sta = container_of(wk, struct sta_info, drv_unblock_wk); + + if (sta->dead) + return; + + if (!test_sta_flags(sta, WLAN_STA_PS_STA)) + ieee80211_sta_ps_deliver_wakeup(sta); + else if (test_and_clear_sta_flags(sta, WLAN_STA_PSPOLL)) + ieee80211_sta_ps_deliver_poll_response(sta); +} + struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, u8 *addr, gfp_t gfp) { @@ -272,6 +289,7 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, spin_lock_init(&sta->lock); spin_lock_init(&sta->flaglock); + INIT_WORK(&sta->drv_unblock_wk, sta_unblock); memcpy(sta->sta.addr, addr, ETH_ALEN); sta->local = local; @@ -478,8 +496,10 @@ static void __sta_info_unlink(struct sta_info **sta) } list_del(&(*sta)->list); + (*sta)->dead = true; - if (test_and_clear_sta_flags(*sta, WLAN_STA_PS)) { + if (test_and_clear_sta_flags(*sta, + WLAN_STA_PS_STA | WLAN_STA_PS_DRIVER)) { BUG_ON(!sdata->bss); atomic_dec(&sdata->bss->num_sta_ps); @@ -801,8 +821,8 @@ void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata, sta_info_destroy(sta); } -struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw, - const u8 *addr) +struct ieee80211_sta *ieee80211_find_sta_by_hw(struct ieee80211_hw *hw, + const u8 *addr) { struct sta_info *sta = sta_info_get(hw_to_local(hw), addr); @@ -810,4 +830,114 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw, return NULL; return &sta->sta; } +EXPORT_SYMBOL_GPL(ieee80211_find_sta_by_hw); + +struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif, + const u8 *addr) +{ + struct ieee80211_sub_if_data *sdata; + + if (!vif) + return NULL; + + sdata = vif_to_sdata(vif); + + return ieee80211_find_sta_by_hw(&sdata->local->hw, addr); +} EXPORT_SYMBOL(ieee80211_find_sta); + +/* powersave support code */ +void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + struct ieee80211_local *local = sdata->local; + int sent, buffered; + + drv_sta_notify(local, &sdata->vif, STA_NOTIFY_AWAKE, &sta->sta); + + if (!skb_queue_empty(&sta->ps_tx_buf)) + sta_info_clear_tim_bit(sta); + + /* Send all buffered frames to the station */ + sent = ieee80211_add_pending_skbs(local, &sta->tx_filtered); + buffered = ieee80211_add_pending_skbs(local, &sta->ps_tx_buf); + sent += buffered; + local->total_ps_buffered -= buffered; + +#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG + printk(KERN_DEBUG "%s: STA %pM aid %d sending %d filtered/%d PS frames " + "since STA not sleeping anymore\n", sdata->dev->name, + sta->sta.addr, sta->sta.aid, sent - buffered, buffered); +#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ +} + +void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + struct ieee80211_local *local = sdata->local; + struct sk_buff *skb; + int no_pending_pkts; + + skb = skb_dequeue(&sta->tx_filtered); + if (!skb) { + skb = skb_dequeue(&sta->ps_tx_buf); + if (skb) + local->total_ps_buffered--; + } + no_pending_pkts = skb_queue_empty(&sta->tx_filtered) && + skb_queue_empty(&sta->ps_tx_buf); + + if (skb) { + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *hdr = + (struct ieee80211_hdr *) skb->data; + + /* + * Tell TX path to send this frame even though the STA may + * still remain is PS mode after this frame exchange. + */ + info->flags |= IEEE80211_TX_CTL_PSPOLL_RESPONSE; + +#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG + printk(KERN_DEBUG "STA %pM aid %d: PS Poll (entries after %d)\n", + sta->sta.addr, sta->sta.aid, + skb_queue_len(&sta->ps_tx_buf)); +#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ + + /* Use MoreData flag to indicate whether there are more + * buffered frames for this STA */ + if (no_pending_pkts) + hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREDATA); + else + hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA); + + ieee80211_add_pending_skb(local, skb); + + if (no_pending_pkts) + sta_info_clear_tim_bit(sta); +#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG + } else { + /* + * FIXME: This can be the result of a race condition between + * us expiring a frame and the station polling for it. + * Should we send it a null-func frame indicating we + * have nothing buffered for it? + */ + printk(KERN_DEBUG "%s: STA %pM sent PS Poll even " + "though there are no buffered frames for it\n", + sdata->dev->name, sta->sta.addr); +#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */ + } +} + +void ieee80211_sta_block_awake(struct ieee80211_hw *hw, + struct ieee80211_sta *pubsta, bool block) +{ + struct sta_info *sta = container_of(pubsta, struct sta_info, sta); + + if (block) + set_sta_flags(sta, WLAN_STA_PS_DRIVER); + else + ieee80211_queue_work(hw, &sta->drv_unblock_wk); +} +EXPORT_SYMBOL(ieee80211_sta_block_awake); diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index ccc3adf962c7..4673454176ed 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -12,6 +12,7 @@ #include <linux/list.h> #include <linux/types.h> #include <linux/if_ether.h> +#include <linux/workqueue.h> #include "key.h" /** @@ -21,7 +22,7 @@ * * @WLAN_STA_AUTH: Station is authenticated. * @WLAN_STA_ASSOC: Station is associated. - * @WLAN_STA_PS: Station is in power-save mode + * @WLAN_STA_PS_STA: Station is in power-save mode * @WLAN_STA_AUTHORIZED: Station is authorized to send/receive traffic. * This bit is always checked so needs to be enabled for all stations * when virtual port control is not in use. @@ -36,11 +37,16 @@ * @WLAN_STA_MFP: Management frame protection is used with this STA. * @WLAN_STA_SUSPEND: Set/cleared during a suspend/resume cycle. * Used to deny ADDBA requests (both TX and RX). + * @WLAN_STA_PS_DRIVER: driver requires keeping this station in + * power-save mode logically to flush frames that might still + * be in the queues + * @WLAN_STA_PSPOLL: Station sent PS-poll while driver was keeping + * station in power-save mode, reply when the driver unblocks. */ enum ieee80211_sta_info_flags { WLAN_STA_AUTH = 1<<0, WLAN_STA_ASSOC = 1<<1, - WLAN_STA_PS = 1<<2, + WLAN_STA_PS_STA = 1<<2, WLAN_STA_AUTHORIZED = 1<<3, WLAN_STA_SHORT_PREAMBLE = 1<<4, WLAN_STA_ASSOC_AP = 1<<5, @@ -48,7 +54,9 @@ enum ieee80211_sta_info_flags { WLAN_STA_WDS = 1<<7, WLAN_STA_CLEAR_PS_FILT = 1<<9, WLAN_STA_MFP = 1<<10, - WLAN_STA_SUSPEND = 1<<11 + WLAN_STA_SUSPEND = 1<<11, + WLAN_STA_PS_DRIVER = 1<<12, + WLAN_STA_PSPOLL = 1<<13, }; #define STA_TID_NUM 16 @@ -193,7 +201,6 @@ struct sta_ampdu_mlme { * @rx_fragments: number of received MPDUs * @rx_dropped: number of dropped MPDUs from this STA * @last_signal: signal of last received frame from this STA - * @last_qual: qual of last received frame from this STA * @last_noise: noise of last received frame from this STA * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue) * @tx_filtered_count: number of frames the hardware filtered for this STA @@ -217,6 +224,8 @@ struct sta_ampdu_mlme { * @plink_timer_was_running: used by suspend/resume to restore timers * @debugfs: debug filesystem info * @sta: station information we share with the driver + * @dead: set to true when sta is unlinked + * @drv_unblock_wk used for driver PS unblocking */ struct sta_info { /* General information, mostly static */ @@ -230,8 +239,12 @@ struct sta_info { spinlock_t lock; spinlock_t flaglock; + struct work_struct drv_unblock_wk; + u16 listen_interval; + bool dead; + /* * for use by the internal lifetime management, * see __sta_info_unlink @@ -259,7 +272,6 @@ struct sta_info { unsigned long rx_fragments; unsigned long rx_dropped; int last_signal; - int last_qual; int last_noise; __le16 last_seq_ctrl[NUM_RX_DATA_QUEUES]; @@ -301,28 +313,6 @@ struct sta_info { #ifdef CONFIG_MAC80211_DEBUGFS struct sta_info_debugfsdentries { struct dentry *dir; - struct dentry *flags; - struct dentry *num_ps_buf_frames; - struct dentry *inactive_ms; - struct dentry *last_seq_ctrl; - struct dentry *agg_status; - struct dentry *aid; - struct dentry *dev; - struct dentry *rx_packets; - struct dentry *tx_packets; - struct dentry *rx_bytes; - struct dentry *tx_bytes; - struct dentry *rx_duplicates; - struct dentry *rx_fragments; - struct dentry *rx_dropped; - struct dentry *tx_fragments; - struct dentry *tx_filtered; - struct dentry *tx_retry_failed; - struct dentry *tx_retry_count; - struct dentry *last_signal; - struct dentry *last_qual; - struct dentry *last_noise; - struct dentry *wep_weak_iv_count; bool add_has_run; } debugfs; #endif @@ -454,4 +444,7 @@ int sta_info_flush(struct ieee80211_local *local, void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata, unsigned long exp_time); +void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta); +void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta); + #endif /* STA_INFO_H */ diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index eaa4118de988..bfaa43e096d2 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -317,12 +317,11 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx) if (!atomic_read(&tx->sdata->bss->num_sta_ps)) return TX_CONTINUE; - /* buffered in hardware */ - if (!(tx->local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING)) { - info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM; + info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM; + /* device releases frame after DTIM beacon */ + if (!(tx->local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING)) return TX_CONTINUE; - } /* buffered in mac80211 */ if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) @@ -375,7 +374,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) staflags = get_sta_flags(sta); - if (unlikely((staflags & WLAN_STA_PS) && + if (unlikely((staflags & (WLAN_STA_PS_STA | WLAN_STA_PS_DRIVER)) && !(info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE))) { #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG printk(KERN_DEBUG "STA %pM aid %d: PS buffer (entries " @@ -398,8 +397,13 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) } else tx->local->total_ps_buffered++; - /* Queue frame to be sent after STA sends an PS Poll frame */ - if (skb_queue_empty(&sta->ps_tx_buf)) + /* + * Queue frame to be sent after STA wakes up/polls, + * but don't set the TIM bit if the driver is blocking + * wakeup or poll response transmissions anyway. + */ + if (skb_queue_empty(&sta->ps_tx_buf) && + !(staflags & WLAN_STA_PS_DRIVER)) sta_info_set_tim_bit(sta); info->control.jiffies = jiffies; @@ -409,7 +413,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) return TX_QUEUED; } #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG - else if (unlikely(test_sta_flags(sta, WLAN_STA_PS))) { + else if (unlikely(staflags & WLAN_STA_PS_STA)) { printk(KERN_DEBUG "%s: STA %pM in PS mode, but pspoll " "set -> send frame\n", tx->dev->name, sta->sta.addr); @@ -1201,23 +1205,25 @@ static int invoke_tx_handlers(struct ieee80211_tx_data *tx) struct sk_buff *skb = tx->skb; ieee80211_tx_result res = TX_DROP; -#define CALL_TXH(txh) \ - res = txh(tx); \ - if (res != TX_CONTINUE) \ - goto txh_done; - - CALL_TXH(ieee80211_tx_h_check_assoc) - CALL_TXH(ieee80211_tx_h_ps_buf) - CALL_TXH(ieee80211_tx_h_select_key) - CALL_TXH(ieee80211_tx_h_michael_mic_add) - CALL_TXH(ieee80211_tx_h_rate_ctrl) - CALL_TXH(ieee80211_tx_h_misc) - CALL_TXH(ieee80211_tx_h_sequence) - CALL_TXH(ieee80211_tx_h_fragment) +#define CALL_TXH(txh) \ + do { \ + res = txh(tx); \ + if (res != TX_CONTINUE) \ + goto txh_done; \ + } while (0) + + CALL_TXH(ieee80211_tx_h_check_assoc); + CALL_TXH(ieee80211_tx_h_ps_buf); + CALL_TXH(ieee80211_tx_h_select_key); + CALL_TXH(ieee80211_tx_h_michael_mic_add); + CALL_TXH(ieee80211_tx_h_rate_ctrl); + CALL_TXH(ieee80211_tx_h_misc); + CALL_TXH(ieee80211_tx_h_sequence); + CALL_TXH(ieee80211_tx_h_fragment); /* handlers after fragment must be aware of tx info fragmentation! */ - CALL_TXH(ieee80211_tx_h_stats) - CALL_TXH(ieee80211_tx_h_encrypt) - CALL_TXH(ieee80211_tx_h_calculate_duration) + CALL_TXH(ieee80211_tx_h_stats); + CALL_TXH(ieee80211_tx_h_encrypt); + CALL_TXH(ieee80211_tx_h_calculate_duration); #undef CALL_TXH txh_done: @@ -1387,6 +1393,30 @@ static int ieee80211_skb_resize(struct ieee80211_local *local, return 0; } +static bool need_dynamic_ps(struct ieee80211_local *local) +{ + /* driver doesn't support power save */ + if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) + return false; + + /* hardware does dynamic power save */ + if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS) + return false; + + /* dynamic power save disabled */ + if (local->hw.conf.dynamic_ps_timeout <= 0) + return false; + + /* we are scanning, don't enable power save */ + if (local->scanning) + return false; + + if (!local->ps_sdata) + return false; + + return true; +} + static void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) { @@ -1399,9 +1429,7 @@ static void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, dev_hold(sdata->dev); - if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) && - local->hw.conf.dynamic_ps_timeout > 0 && - !(local->scanning) && local->ps_sdata) { + if (need_dynamic_ps(local)) { if (local->hw.conf.flags & IEEE80211_CONF_PS) { ieee80211_stop_queues_by_reason(&local->hw, IEEE80211_QUEUE_STOP_REASON_PS); @@ -1990,8 +2018,9 @@ static void ieee80211_beacon_add_tim(struct ieee80211_if_ap *bss, } } -struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) +struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + u16 *tim_offset, u16 *tim_length) { struct ieee80211_local *local = hw_to_local(hw); struct sk_buff *skb = NULL; @@ -2008,6 +2037,11 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, sdata = vif_to_sdata(vif); + if (tim_offset) + *tim_offset = 0; + if (tim_length) + *tim_length = 0; + if (sdata->vif.type == NL80211_IFTYPE_AP) { ap = &sdata->u.ap; beacon = rcu_dereference(ap->beacon); @@ -2043,6 +2077,11 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, spin_unlock_irqrestore(&local->sta_lock, flags); } + if (tim_offset) + *tim_offset = beacon->head_len; + if (tim_length) + *tim_length = skb->len - beacon->head_len; + if (beacon->tail) memcpy(skb_put(skb, beacon->tail_len), beacon->tail, beacon->tail_len); @@ -2119,7 +2158,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, rcu_read_unlock(); return skb; } -EXPORT_SYMBOL(ieee80211_beacon_get); +EXPORT_SYMBOL(ieee80211_beacon_get_tim); void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const void *frame, size_t frame_len, diff --git a/net/mac80211/util.c b/net/mac80211/util.c index aeb65b3d2295..aedbaaa067e6 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -872,13 +872,14 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, } int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer, - const u8 *ie, size_t ie_len) + const u8 *ie, size_t ie_len, + enum ieee80211_band band) { struct ieee80211_supported_band *sband; u8 *pos, *supp_rates_len, *esupp_rates_len = NULL; int i; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + sband = local->hw.wiphy->bands[band]; pos = buffer; @@ -966,7 +967,8 @@ void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, memcpy(pos, ssid, ssid_len); pos += ssid_len; - skb_put(skb, ieee80211_build_preq_ies(local, pos, ie, ie_len)); + skb_put(skb, ieee80211_build_preq_ies(local, pos, ie, ie_len, + local->hw.conf.channel->band)); ieee80211_tx_skb(sdata, skb, 0); } diff --git a/net/wireless/core.c b/net/wireless/core.c index 07252967be9c..02835172b227 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -546,7 +546,7 @@ void wiphy_unregister(struct wiphy *wiphy) * First remove the hardware from everywhere, this makes * it impossible to find from userspace. */ - cfg80211_debugfs_rdev_del(rdev); + debugfs_remove_recursive(rdev->wiphy.debugfsdir); list_del(&rdev->list); /* @@ -569,7 +569,6 @@ void wiphy_unregister(struct wiphy *wiphy) cfg80211_rdev_list_generation++; device_del(&rdev->wiphy.dev); - debugfs_remove(rdev->wiphy.debugfsdir); mutex_unlock(&cfg80211_mutex); diff --git a/net/wireless/core.h b/net/wireless/core.h index 68b321997d4c..5aeebb9085f8 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -72,17 +72,6 @@ struct cfg80211_registered_device { /* current channel */ struct ieee80211_channel *channel; -#ifdef CONFIG_CFG80211_DEBUGFS - /* Debugfs entries */ - struct wiphy_debugfsdentries { - struct dentry *rts_threshold; - struct dentry *fragmentation_threshold; - struct dentry *short_retry_limit; - struct dentry *long_retry_limit; - struct dentry *ht40allow_map; - } debugfs; -#endif - /* must be last because of the way we do wiphy_priv(), * and it should at least be aligned to NETDEV_ALIGN */ struct wiphy wiphy __attribute__((__aligned__(NETDEV_ALIGN))); diff --git a/net/wireless/debugfs.c b/net/wireless/debugfs.c index 13d93d84f902..2e4895615037 100644 --- a/net/wireless/debugfs.c +++ b/net/wireless/debugfs.c @@ -104,11 +104,7 @@ static const struct file_operations ht40allow_map_ops = { }; #define DEBUGFS_ADD(name) \ - rdev->debugfs.name = debugfs_create_file(#name, S_IRUGO, phyd, \ - &rdev->wiphy, &name## _ops); -#define DEBUGFS_DEL(name) \ - debugfs_remove(rdev->debugfs.name); \ - rdev->debugfs.name = NULL; + debugfs_create_file(#name, S_IRUGO, phyd, &rdev->wiphy, &name## _ops); void cfg80211_debugfs_rdev_add(struct cfg80211_registered_device *rdev) { @@ -120,12 +116,3 @@ void cfg80211_debugfs_rdev_add(struct cfg80211_registered_device *rdev) DEBUGFS_ADD(long_retry_limit); DEBUGFS_ADD(ht40allow_map); } - -void cfg80211_debugfs_rdev_del(struct cfg80211_registered_device *rdev) -{ - DEBUGFS_DEL(rts_threshold); - DEBUGFS_DEL(fragmentation_threshold); - DEBUGFS_DEL(short_retry_limit); - DEBUGFS_DEL(long_retry_limit); - DEBUGFS_DEL(ht40allow_map); -} diff --git a/net/wireless/debugfs.h b/net/wireless/debugfs.h index 6419b6d6ce3e..74fdd3811427 100644 --- a/net/wireless/debugfs.h +++ b/net/wireless/debugfs.h @@ -3,12 +3,9 @@ #ifdef CONFIG_CFG80211_DEBUGFS void cfg80211_debugfs_rdev_add(struct cfg80211_registered_device *rdev); -void cfg80211_debugfs_rdev_del(struct cfg80211_registered_device *rdev); #else static inline void cfg80211_debugfs_rdev_add(struct cfg80211_registered_device *rdev) {} -static inline -void cfg80211_debugfs_rdev_del(struct cfg80211_registered_device *rdev) {} #endif #endif /* __CFG80211_DEBUGFS_H */ diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 83c2a288dc63..2610b746effa 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -62,7 +62,6 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len) u8 *ie = mgmt->u.assoc_resp.variable; int i, ieoffs = offsetof(struct ieee80211_mgmt, u.assoc_resp.variable); struct cfg80211_internal_bss *bss = NULL; - bool need_connect_result = true; wdev_lock(wdev); @@ -97,7 +96,6 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len) WARN_ON(!bss); } else if (wdev->conn) { cfg80211_sme_failed_assoc(wdev); - need_connect_result = false; /* * do not call connect_result() now because the * sme will schedule work that does it later. diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index f48394126bf9..8ed62b6c172b 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -2988,7 +2988,6 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) goto out; } - request->n_channels = n_channels; if (n_ssids) request->ssids = (void *)&request->channels[n_channels]; request->n_ssids = n_ssids; @@ -2999,32 +2998,53 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) request->ie = (void *)(request->channels + n_channels); } + i = 0; if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) { /* user specified, bail out if channel not found */ - request->n_channels = n_channels; - i = 0; nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_FREQUENCIES], tmp) { - request->channels[i] = ieee80211_get_channel(wiphy, nla_get_u32(attr)); - if (!request->channels[i]) { + struct ieee80211_channel *chan; + + chan = ieee80211_get_channel(wiphy, nla_get_u32(attr)); + + if (!chan) { err = -EINVAL; goto out_free; } + + /* ignore disabled channels */ + if (chan->flags & IEEE80211_CHAN_DISABLED) + continue; + + request->channels[i] = chan; i++; } } else { /* all channels */ - i = 0; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { int j; if (!wiphy->bands[band]) continue; for (j = 0; j < wiphy->bands[band]->n_channels; j++) { - request->channels[i] = &wiphy->bands[band]->channels[j]; + struct ieee80211_channel *chan; + + chan = &wiphy->bands[band]->channels[j]; + + if (chan->flags & IEEE80211_CHAN_DISABLED) + continue; + + request->channels[i] = chan; i++; } } } + if (!i) { + err = -EINVAL; + goto out_free; + } + + request->n_channels = i; + i = 0; if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) { nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) { diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 2e8c515f3c5c..e2d344ff6745 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -650,9 +650,15 @@ int cfg80211_wext_siwscan(struct net_device *dev, i = 0; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { int j; + if (!wiphy->bands[band]) continue; + for (j = 0; j < wiphy->bands[band]->n_channels; j++) { + /* ignore disabled channels */ + if (wiphy->bands[band]->channels[j].flags & + IEEE80211_CHAN_DISABLED) + continue; /* If we have a wireless request structure and the * wireless request specifies frequencies, then search diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index 561a45cf2a6a..41abcbdc5fb9 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -904,8 +904,6 @@ static int cfg80211_set_auth_alg(struct wireless_dev *wdev, static int cfg80211_set_wpa_version(struct wireless_dev *wdev, u32 wpa_versions) { - wdev->wext.connect.crypto.wpa_versions = 0; - if (wpa_versions & ~(IW_AUTH_WPA_VERSION_WPA | IW_AUTH_WPA_VERSION_WPA2| IW_AUTH_WPA_VERSION_DISABLED)) @@ -933,8 +931,6 @@ static int cfg80211_set_wpa_version(struct wireless_dev *wdev, u32 wpa_versions) static int cfg80211_set_cipher_group(struct wireless_dev *wdev, u32 cipher) { - wdev->wext.connect.crypto.cipher_group = 0; - if (cipher & IW_AUTH_CIPHER_WEP40) wdev->wext.connect.crypto.cipher_group = WLAN_CIPHER_SUITE_WEP40; @@ -950,6 +946,8 @@ static int cfg80211_set_cipher_group(struct wireless_dev *wdev, u32 cipher) else if (cipher & IW_AUTH_CIPHER_AES_CMAC) wdev->wext.connect.crypto.cipher_group = WLAN_CIPHER_SUITE_AES_CMAC; + else if (cipher & IW_AUTH_CIPHER_NONE) + wdev->wext.connect.crypto.cipher_group = 0; else return -EINVAL; |
