diff options
85 files changed, 1269 insertions, 3607 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9dd61014864b..43449305961e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -197,15 +197,21 @@ config ARM_PATCH_PHYS_VIRT depends on !XIP_KERNEL && MMU depends on !ARCH_REALVIEW || !SPARSEMEM help - Patch phys-to-virt translation functions at runtime according to - the position of the kernel in system memory. + Patch phys-to-virt and virt-to-phys translation functions at + boot and module load time according to the position of the + kernel in system memory. - This can only be used with non-XIP with MMU kernels where - the base of physical memory is at a 16MB boundary. + This can only be used with non-XIP MMU kernels where the base + of physical memory is at a 16MB boundary, or theoretically 64K + for the MSM machine class. config ARM_PATCH_PHYS_VIRT_16BIT def_bool y depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM + help + This option extends the physical to virtual translation patching + to allow physical memory down to a theoretical minimum of 64K + boundaries. source "init/Kconfig" @@ -550,18 +556,6 @@ config ARCH_KS8695 Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. -config ARCH_NS9XXX - bool "NetSilicon NS9xxx" - select CPU_ARM926T - select GENERIC_GPIO - select GENERIC_CLOCKEVENTS - select HAVE_CLK - help - Say Y here if you intend to run this kernel on a NetSilicon NS9xxx - System. - - <http://www.digi.com/products/microprocessors/index.jsp> - config ARCH_W90X900 bool "Nuvoton W90X900 CPU" select CPU_ARM926T @@ -954,8 +948,6 @@ source "arch/arm/mach-netx/Kconfig" source "arch/arm/mach-nomadik/Kconfig" source "arch/arm/plat-nomadik/Kconfig" -source "arch/arm/mach-ns9xxx/Kconfig" - source "arch/arm/mach-nuc93x/Kconfig" source "arch/arm/plat-omap/Kconfig" @@ -1321,8 +1313,7 @@ menu "Kernel Features" source "kernel/time/Kconfig" config SMP - bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Symmetric Multi-Processing" depends on CPU_V6K || CPU_V7 depends on GENERIC_CLOCKEVENTS depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ @@ -1524,8 +1515,8 @@ config ARCH_SELECT_MEMORY_MODEL def_bool ARCH_SPARSEMEM_ENABLE config HIGHMEM - bool "High Memory Support (EXPERIMENTAL)" - depends on MMU && EXPERIMENTAL + bool "High Memory Support" + depends on MMU help The address space of ARM processors is only 4 Gigabytes large and it has to accommodate user address space, kernel address @@ -1745,16 +1736,31 @@ config CMDLINE time by entering them here. As a minimum, you should specify the memory size and the root device (e.g., mem=64M root=/dev/nfs). +choice + prompt "Kernel command line type" if CMDLINE != "" + default CMDLINE_FROM_BOOTLOADER + +config CMDLINE_FROM_BOOTLOADER + bool "Use bootloader kernel arguments if available" + help + Uses the command-line options passed by the boot loader. If + the boot loader doesn't provide any, the default kernel command + string provided in CMDLINE will be used. + +config CMDLINE_EXTEND + bool "Extend bootloader kernel arguments" + help + The command-line arguments provided by the boot loader will be + appended to the default kernel command string. + config CMDLINE_FORCE bool "Always use the default kernel command string" - depends on CMDLINE != "" help Always use the default kernel command string, even if the boot loader passes other arguments to the kernel. This is useful if you cannot or don't want to change the command-line options your boot loader passes to the kernel. - - If unsure, say N. +endchoice config XIP_KERNEL bool "Kernel Execute-In-Place from ROM" @@ -2013,7 +2019,7 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE - depends on !ARCH_S5P64X0 && !ARCH_S5P6442 + depends on !ARCH_S5P64X0 && !ARCH_S5P6442 && !ARCH_S5PC100 depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 692c481196bd..458a01516676 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -164,7 +164,6 @@ machine-$(CONFIG_ARCH_MXC91231) := mxc91231 machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik -machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx machine-$(CONFIG_ARCH_OMAP1) := omap1 machine-$(CONFIG_ARCH_OMAP2) := omap2 machine-$(CONFIG_ARCH_OMAP3) := omap2 diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 49f5b2eaaa87..6fdf4abb718b 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -459,7 +459,11 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size orr r1, r1, #3 << 10 add r2, r3, #16384 1: cmp r1, r9 @ if virt > start of RAM +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + orrhs r1, r1, #0x08 @ set cacheable +#else orrhs r1, r1, #0x0c @ set cacheable, bufferable +#endif cmp r1, r10 @ if virt > end of RAM bichs r1, r1, #0x0c @ clear cacheable, bufferable str r1, [r0], #4 @ 1:1 mapping @@ -484,6 +488,12 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size mov pc, lr ENDPROC(__setup_mmu) +__arm926ejs_mmu_cache_on: +#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH + mov r0, #4 @ put dcache in WT mode + mcr p15, 7, r0, c15, c0, 0 +#endif + __armv4_mmu_cache_on: mov r12, lr #ifdef CONFIG_MMU @@ -665,6 +675,12 @@ proc_types: W(b) __armv4_mpu_cache_off W(b) __armv4_mpu_cache_flush + .word 0x41069260 @ ARM926EJ-S (v5TEJ) + .word 0xff0ffff0 + b __arm926ejs_mmu_cache_on + b __armv4_mmu_cache_off + b __armv5tej_mmu_cache_flush + .word 0x00007000 @ ARM7 IDs .word 0x0000f000 mov pc, lr diff --git a/arch/arm/configs/ns9xxx_defconfig b/arch/arm/configs/ns9xxx_defconfig deleted file mode 100644 index 1f528a002983..000000000000 --- a/arch/arm/configs/ns9xxx_defconfig +++ /dev/null @@ -1,56 +0,0 @@ -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_NS9XXX=y -CONFIG_MACH_CC9P9360DEV=y -CONFIG_MACH_CC9P9360JS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_SYN_COOKIES=y -CONFIG_MTD=m -CONFIG_MTD_CONCAT=m -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_PHYSMAP=m -CONFIG_BLK_DEV_LOOP=m -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=m -CONFIG_I2C_GPIO=m -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=m -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_RTC_CLASS=m -CONFIG_EXT2_FS=m -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=m -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y diff --git a/arch/arm/configs/spear310_defconfig b/arch/arm/configs/spear310_defconfig deleted file mode 100644 index 824e44418b18..000000000000 --- a/arch/arm/configs/spear310_defconfig +++ /dev/null @@ -1,52 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_PLAT_SPEAR=y -CONFIG_MACH_SPEAR310=y -CONFIG_BINFMT_MISC=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_INPUT_FF_MEMLESS=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=8192 -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_PL061=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_AUTOFS4_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -CONFIG_TMPFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=m -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/spear320_defconfig b/arch/arm/configs/spear320_defconfig deleted file mode 100644 index 842f7f3c512a..000000000000 --- a/arch/arm/configs/spear320_defconfig +++ /dev/null @@ -1,52 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_PLAT_SPEAR=y -CONFIG_MACH_SPEAR320=y -CONFIG_BINFMT_MISC=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_INPUT_FF_MEMLESS=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=8192 -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_PL061=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_AUTOFS4_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -CONFIG_TMPFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=m -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/spear300_defconfig b/arch/arm/configs/spear3xx_defconfig index cf29f3e56922..fea7e1f026a3 100644 --- a/arch/arm/configs/spear300_defconfig +++ b/arch/arm/configs/spear3xx_defconfig @@ -7,6 +7,9 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_PLAT_SPEAR=y +CONFIG_BOARD_SPEAR300_EVB=y +CONFIG_BOARD_SPEAR310_EVB=y +CONFIG_BOARD_SPEAR320_EVB=y CONFIG_BINFMT_MISC=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y @@ -24,7 +27,6 @@ CONFIG_MAX_RAW_DEVS=8192 CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PL061=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/spear600_defconfig b/arch/arm/configs/spear6xx_defconfig index 6777c11f63e7..cef2e836afd2 100644 --- a/arch/arm/configs/spear600_defconfig +++ b/arch/arm/configs/spear6xx_defconfig @@ -8,6 +8,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR6XX=y +CONFIG_BOARD_SPEAR600_EVB=y CONFIG_BINFMT_MISC=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y @@ -22,7 +23,6 @@ CONFIG_MAX_RAW_DEVS=8192 CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PL061=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_EXT2_FS=y diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index c3cd8755e648..0e9ce8d9686e 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -108,6 +108,7 @@ struct task_struct; int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); #define ELF_CORE_COPY_TASK_REGS dump_task_regs +#define CORE_DUMP_USE_REGSET #define ELF_EXEC_PAGESIZE 4096 /* This is the location that an ET_DYN program is loaded if exec'ed. Typical diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 199a6b6de7f4..8c73900da9ed 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -3,16 +3,74 @@ #ifdef __KERNEL__ +#if defined(CONFIG_CPU_USE_DOMAINS) && defined(CONFIG_SMP) +/* ARM doesn't provide unprivileged exclusive memory accessors */ +#include <asm-generic/futex.h> +#else + +#include <linux/futex.h> +#include <linux/uaccess.h> +#include <asm/errno.h> + +#define __futex_atomic_ex_table(err_reg) \ + "3:\n" \ + " .pushsection __ex_table,\"a\"\n" \ + " .align 3\n" \ + " .long 1b, 4f, 2b, 4f\n" \ + " .popsection\n" \ + " .pushsection .fixup,\"ax\"\n" \ + "4: mov %0, " err_reg "\n" \ + " b 3b\n" \ + " .popsection" + #ifdef CONFIG_SMP -#include <asm-generic/futex.h> +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ + smp_mb(); \ + __asm__ __volatile__( \ + "1: ldrex %1, [%2]\n" \ + " " insn "\n" \ + "2: strex %1, %0, [%2]\n" \ + " teq %1, #0\n" \ + " bne 1b\n" \ + " mov %0, #0\n" \ + __futex_atomic_ex_table("%4") \ + : "=&r" (ret), "=&r" (oldval) \ + : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ + : "cc", "memory") + +static inline int +futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, + u32 oldval, u32 newval) +{ + int ret; + u32 val; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) + return -EFAULT; + + smp_mb(); + __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n" + "1: ldrex %1, [%4]\n" + " teq %1, %2\n" + " ite eq @ explicit IT needed for the 2b label\n" + "2: strexeq %0, %3, [%4]\n" + " movne %0, #0\n" + " teq %0, #0\n" + " bne 1b\n" + __futex_atomic_ex_table("%5") + : "=&r" (ret), "=&r" (val) + : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT) + : "cc", "memory"); + smp_mb(); + + *uval = val; + return ret; +} #else /* !SMP, we can work around lack of atomic ops by disabling preemption */ -#include <linux/futex.h> #include <linux/preempt.h> -#include <linux/uaccess.h> -#include <asm/errno.h> #include <asm/domain.h> #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ @@ -21,20 +79,38 @@ " " insn "\n" \ "2: " T(str) " %0, [%2]\n" \ " mov %0, #0\n" \ - "3:\n" \ - " .pushsection __ex_table,\"a\"\n" \ - " .align 3\n" \ - " .long 1b, 4f, 2b, 4f\n" \ - " .popsection\n" \ - " .pushsection .fixup,\"ax\"\n" \ - "4: mov %0, %4\n" \ - " b 3b\n" \ - " .popsection" \ + __futex_atomic_ex_table("%4") \ : "=&r" (ret), "=&r" (oldval) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") static inline int +futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, + u32 oldval, u32 newval) +{ + int ret = 0; + u32 val; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) + return -EFAULT; + + __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n" + "1: " T(ldr) " %1, [%4]\n" + " teq %1, %2\n" + " it eq @ explicit IT needed for the 2b label\n" + "2: " T(streq) " %3, [%4]\n" + __futex_atomic_ex_table("%5") + : "+r" (ret), "=&r" (val) + : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT) + : "cc", "memory"); + + *uval = val; + return ret; +} + +#endif /* !SMP */ + +static inline int futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) { int op = (encoded_op >> 28) & 7; @@ -87,39 +163,6 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) return ret; } -static inline int -futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, - u32 oldval, u32 newval) -{ - int ret = 0; - u32 val; - - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) - return -EFAULT; - - __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n" - "1: " T(ldr) " %1, [%4]\n" - " teq %1, %2\n" - " it eq @ explicit IT needed for the 2b label\n" - "2: " T(streq) " %3, [%4]\n" - "3:\n" - " .pushsection __ex_table,\"a\"\n" - " .align 3\n" - " .long 1b, 4f, 2b, 4f\n" - " .popsection\n" - " .pushsection .fixup,\"ax\"\n" - "4: mov %0, %5\n" - " b 3b\n" - " .popsection" - : "+r" (ret), "=&r" (val) - : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT) - : "cc", "memory"); - - *uval = val; - return ret; -} - -#endif /* !SMP */ - +#endif /* !(CPU_USE_DOMAINS && SMP) */ #endif /* __KERNEL__ */ #endif /* _ASM_ARM_FUTEX_H */ diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index a8ff22b2a391..312d10877bd7 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -128,6 +128,12 @@ struct pt_regs { #define ARM_r0 uregs[0] #define ARM_ORIG_r0 uregs[17] +/* + * The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS + * and core dumps. + */ +#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ ) + #ifdef __KERNEL__ #define user_mode(regs) \ diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index fdd3820edff8..65fa3c88095c 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -5,6 +5,8 @@ #error SMP not supported on pre-ARMv6 CPUs #endif +#include <asm/processor.h> + /* * sev and wfe are ARMv6K extensions. Uniprocessor ARMv6 may not have the K * extensions, so when running on UP, we have to patch these instructions away. diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 139e3c827369..d53c0abc4dd3 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -560,11 +560,6 @@ static int armpmu_event_init(struct perf_event *event) event->destroy = hw_perf_event_destroy; if (!atomic_inc_not_zero(&active_events)) { - if (atomic_read(&active_events) > armpmu->num_events) { - atomic_dec(&active_events); - return -ENOSPC; - } - mutex_lock(&pmu_reserve_mutex); if (atomic_read(&active_events) == 0) { err = armpmu_reserve_hardware(); diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 8182f45ca493..97260060bf26 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -21,6 +21,7 @@ #include <linux/uaccess.h> #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> +#include <linux/regset.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -308,58 +309,6 @@ static int ptrace_write_user(struct task_struct *tsk, unsigned long off, return put_user_reg(tsk, off >> 2, val); } -/* - * Get all user integer registers. - */ -static int ptrace_getregs(struct task_struct *tsk, void __user *uregs) -{ - struct pt_regs *regs = task_pt_regs(tsk); - - return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0; -} - -/* - * Set all user integer registers. - */ -static int ptrace_setregs(struct task_struct *tsk, void __user *uregs) -{ - struct pt_regs newregs; - int ret; - - ret = -EFAULT; - if (copy_from_user(&newregs, uregs, sizeof(struct pt_regs)) == 0) { - struct pt_regs *regs = task_pt_regs(tsk); - - ret = -EINVAL; - if (valid_user_regs(&newregs)) { - *regs = newregs; - ret = 0; - } - } - - return ret; -} - -/* - * Get the child FPU state. - */ -static int ptrace_getfpregs(struct task_struct *tsk, void __user *ufp) -{ - return copy_to_user(ufp, &task_thread_info(tsk)->fpstate, - sizeof(struct user_fp)) ? -EFAULT : 0; -} - -/* - * Set the child FPU state. - */ -static int ptrace_setfpregs(struct task_struct *tsk, void __user *ufp) -{ - struct thread_info *thread = task_thread_info(tsk); - thread->used_cp[1] = thread->used_cp[2] = 1; - return copy_from_user(&thread->fpstate, ufp, - sizeof(struct user_fp)) ? -EFAULT : 0; -} - #ifdef CONFIG_IWMMXT /* @@ -418,56 +367,6 @@ static int ptrace_setcrunchregs(struct task_struct *tsk, void __user *ufp) } #endif -#ifdef CONFIG_VFP -/* - * Get the child VFP state. - */ -static int ptrace_getvfpregs(struct task_struct *tsk, void __user *data) -{ - struct thread_info *thread = task_thread_info(tsk); - union vfp_state *vfp = &thread->vfpstate; - struct user_vfp __user *ufp = data; - - vfp_sync_hwstate(thread); - - /* copy the floating point registers */ - if (copy_to_user(&ufp->fpregs, &vfp->hard.fpregs, - sizeof(vfp->hard.fpregs))) - return -EFAULT; - - /* copy the status and control register */ - if (put_user(vfp->hard.fpscr, &ufp->fpscr)) - return -EFAULT; - - return 0; -} - -/* - * Set the child VFP state. - */ -static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data) -{ - struct thread_info *thread = task_thread_info(tsk); - union vfp_state *vfp = &thread->vfpstate; - struct user_vfp __user *ufp = data; - - vfp_sync_hwstate(thread); - - /* copy the floating point registers */ - if (copy_from_user(&vfp->hard.fpregs, &ufp->fpregs, - sizeof(vfp->hard.fpregs))) - return -EFAULT; - - /* copy the status and control register */ - if (get_user(vfp->hard.fpscr, &ufp->fpscr)) - return -EFAULT; - - vfp_flush_hwstate(thread); - - return 0; -} -#endif - #ifdef CONFIG_HAVE_HW_BREAKPOINT /* * Convert a virtual register number into an index for a thread_info @@ -694,6 +593,219 @@ out: } #endif +/* regset get/set implementations */ + +static int gpr_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) +{ + struct pt_regs *regs = task_pt_regs(target); + + return user_regset_copyout(&pos, &count, &kbuf, &ubuf, + regs, + 0, sizeof(*regs)); +} + +static int gpr_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + int ret; + struct pt_regs newregs; + + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + &newregs, + 0, sizeof(newregs)); + if (ret) + return ret; + + if (!valid_user_regs(&newregs)) + return -EINVAL; + + *task_pt_regs(target) = newregs; + return 0; +} + +static int fpa_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) +{ + return user_regset_copyout(&pos, &count, &kbuf, &ubuf, + &task_thread_info(target)->fpstate, + 0, sizeof(struct user_fp)); +} + +static int fpa_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + struct thread_info *thread = task_thread_info(target); + + thread->used_cp[1] = thread->used_cp[2] = 1; + + return user_regset_copyin(&pos, &count, &kbuf, &ubuf, + &thread->fpstate, + 0, sizeof(struct user_fp)); +} + +#ifdef CONFIG_VFP +/* + * VFP register get/set implementations. + * + * With respect to the kernel, struct user_fp is divided into three chunks: + * 16 or 32 real VFP registers (d0-d15 or d0-31) + * These are transferred to/from the real registers in the task's + * vfp_hard_struct. The number of registers depends on the kernel + * configuration. + * + * 16 or 0 fake VFP registers (d16-d31 or empty) + * i.e., the user_vfp structure has space for 32 registers even if + * the kernel doesn't have them all. + * + * vfp_get() reads this chunk as zero where applicable + * vfp_set() ignores this chunk + * + * 1 word for the FPSCR + * + * The bounds-checking logic built into user_regset_copyout and friends + * means that we can make a simple sequence of calls to map the relevant data + * to/from the specified slice of the user regset structure. + */ +static int vfp_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) +{ + int ret; + struct thread_info *thread = task_thread_info(target); + struct vfp_hard_struct const *vfp = &thread->vfpstate.hard; + const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs); + const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr); + + vfp_sync_hwstate(thread); + + ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, + &vfp->fpregs, + user_fpregs_offset, + user_fpregs_offset + sizeof(vfp->fpregs)); + if (ret) + return ret; + + ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, + user_fpregs_offset + sizeof(vfp->fpregs), + user_fpscr_offset); + if (ret) + return ret; + + return user_regset_copyout(&pos, &count, &kbuf, &ubuf, + &vfp->fpscr, + user_fpscr_offset, + user_fpscr_offset + sizeof(vfp->fpscr)); +} + +/* + * For vfp_set() a read-modify-write is done on the VFP registers, + * in order to avoid writing back a half-modified set of registers on + * failure. + */ +static int vfp_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + int ret; + struct thread_info *thread = task_thread_info(target); + struct vfp_hard_struct new_vfp = thread->vfpstate.hard; + const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs); + const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr); + + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + &new_vfp.fpregs, + user_fpregs_offset, + user_fpregs_offset + sizeof(new_vfp.fpregs)); + if (ret) + return ret; + + ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, + user_fpregs_offset + sizeof(new_vfp.fpregs), + user_fpscr_offset); + if (ret) + return ret; + + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + &new_vfp.fpscr, + user_fpscr_offset, + user_fpscr_offset + sizeof(new_vfp.fpscr)); + if (ret) + return ret; + + vfp_sync_hwstate(thread); + thread->vfpstate.hard = new_vfp; + vfp_flush_hwstate(thread); + + return 0; +} +#endif /* CONFIG_VFP */ + +enum arm_regset { + REGSET_GPR, + REGSET_FPR, +#ifdef CONFIG_VFP + REGSET_VFP, +#endif +}; + +static const struct user_regset arm_regsets[] = { + [REGSET_GPR] = { + .core_note_type = NT_PRSTATUS, + .n = ELF_NGREG, + .size = sizeof(u32), + .align = sizeof(u32), + .get = gpr_get, + .set = gpr_set + }, + [REGSET_FPR] = { + /* + * For the FPA regs in fpstate, the real fields are a mixture + * of sizes, so pretend that the registers are word-sized: + */ + .core_note_type = NT_PRFPREG, + .n = sizeof(struct user_fp) / sizeof(u32), + .size = sizeof(u32), + .align = sizeof(u32), + .get = fpa_get, + .set = fpa_set + }, +#ifdef CONFIG_VFP + [REGSET_VFP] = { + /* + * Pretend that the VFP regs are word-sized, since the FPSCR is + * a single word dangling at the end of struct user_vfp: + */ + .core_note_type = NT_ARM_VFP, + .n = ARM_VFPREGS_SIZE / sizeof(u32), + .size = sizeof(u32), + .align = sizeof(u32), + .get = vfp_get, + .set = vfp_set + }, +#endif /* CONFIG_VFP */ +}; + +static const struct user_regset_view user_arm_view = { + .name = "arm", .e_machine = ELF_ARCH, .ei_osabi = ELF_OSABI, + .regsets = arm_regsets, .n = ARRAY_SIZE(arm_regsets) +}; + +const struct user_regset_view *task_user_regset_view(struct task_struct *task) +{ + return &user_arm_view; +} + long arch_ptrace(struct task_struct *child, long request, unsigned long addr, unsigned long data) { @@ -710,19 +822,31 @@ long arch_ptrace(struct task_struct *child, long request, break; case PTRACE_GETREGS: - ret = ptrace_getregs(child, datap); + ret = copy_regset_to_user(child, + &user_arm_view, REGSET_GPR, + 0, sizeof(struct pt_regs), + datap); break; case PTRACE_SETREGS: - ret = ptrace_setregs(child, datap); + ret = copy_regset_from_user(child, + &user_arm_view, REGSET_GPR, + 0, sizeof(struct pt_regs), + datap); break; case PTRACE_GETFPREGS: - ret = ptrace_getfpregs(child, datap); + ret = copy_regset_to_user(child, + &user_arm_view, REGSET_FPR, + 0, sizeof(union fp_state), + datap); break; - + case PTRACE_SETFPREGS: - ret = ptrace_setfpregs(child, datap); + ret = copy_regset_from_user(child, + &user_arm_view, REGSET_FPR, + 0, sizeof(union fp_state), + datap); break; #ifdef CONFIG_IWMMXT @@ -757,11 +881,17 @@ long arch_ptrace(struct task_struct *child, long request, #ifdef CONFIG_VFP case PTRACE_GETVFPREGS: - ret = ptrace_getvfpregs(child, datap); + ret = copy_regset_to_user(child, + &user_arm_view, REGSET_VFP, + 0, ARM_VFPREGS_SIZE, + datap); break; case PTRACE_SETVFPREGS: - ret = ptrace_setvfpregs(child, datap); + ret = copy_regset_from_user(child, + &user_arm_view, REGSET_VFP, + 0, ARM_VFPREGS_SIZE, + datap); break; #endif diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 006c1e884eaf..6dce209a623b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -672,11 +672,16 @@ __tagtable(ATAG_REVISION, parse_tag_revision); static int __init parse_tag_cmdline(const struct tag *tag) { -#ifndef CONFIG_CMDLINE_FORCE - strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE); -#else +#if defined(CONFIG_CMDLINE_EXTEND) + strlcat(default_command_line, " ", COMMAND_LINE_SIZE); + strlcat(default_command_line, tag->u.cmdline.cmdline, + COMMAND_LINE_SIZE); +#elif defined(CONFIG_CMDLINE_FORCE) pr_warning("Ignoring tag cmdline (using the default kernel command line)\n"); -#endif /* CONFIG_CMDLINE_FORCE */ +#else + strlcpy(default_command_line, tag->u.cmdline.cmdline, + COMMAND_LINE_SIZE); +#endif return 0; } diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c index a5a9ff70b198..415dce37b88c 100644 --- a/arch/arm/mach-ep93xx/gpio.c +++ b/arch/arm/mach-ep93xx/gpio.c @@ -356,29 +356,6 @@ static int ep93xx_gpio_set_debounce(struct gpio_chip *chip, return 0; } -static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - u8 data_reg, data_dir_reg; - int gpio, i; - - data_reg = __raw_readb(ep93xx_chip->data_reg); - data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg); - - gpio = ep93xx_chip->chip.base; - for (i = 0; i < chip->ngpio; i++, gpio++) { - int is_out = data_dir_reg & (1 << i); - int irq = gpio_to_irq(gpio); - - seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s %s\n", - chip->label, i, gpio, - gpiochip_is_requested(chip, i) ? : "", - is_out ? "out" : "in ", - (data_reg & (1<< i)) ? "hi" : "lo", - (!is_out && irq>= 0) ? "(interrupt)" : ""); - } -} - #define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \ { \ .chip = { \ @@ -387,7 +364,6 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) .direction_output = ep93xx_gpio_direction_output, \ .get = ep93xx_gpio_get, \ .set = ep93xx_gpio_set, \ - .dbg_show = ep93xx_gpio_dbg_show, \ .base = base_gpio, \ .ngpio = 8, \ }, \ diff --git a/arch/arm/mach-ns9xxx/Kconfig b/arch/arm/mach-ns9xxx/Kconfig deleted file mode 100644 index dd0cd5ac4b8b..000000000000 --- a/arch/arm/mach-ns9xxx/Kconfig +++ /dev/null @@ -1,40 +0,0 @@ -if ARCH_NS9XXX - -menu "NS9xxx Implementations" - -config NS9XXX_HAVE_SERIAL8250 - bool - -config PROCESSOR_NS9360 - bool - -config MODULE_CC9P9360 - bool - select PROCESSOR_NS9360 - -config BOARD_A9M9750DEV - select NS9XXX_HAVE_SERIAL8250 - bool - -config BOARD_JSCC9P9360 - bool - -config MACH_CC9P9360DEV - bool "ConnectCore 9P 9360 on an A9M9750 Devboard" - select MODULE_CC9P9360 - select BOARD_A9M9750DEV - help - Say Y here if you are using the Digi ConnectCore 9P 9360 - on an A9M9750 Development Board. - -config MACH_CC9P9360JS - bool "ConnectCore 9P 9360 on a JSCC9P9360 Devboard" - select MODULE_CC9P9360 - select BOARD_JSCC9P9360 - help - Say Y here if you are using the Digi ConnectCore 9P 9360 - on an JSCC9P9360 Development Board. - -endmenu - -endif diff --git a/arch/arm/mach-ns9xxx/Makefile b/arch/arm/mach-ns9xxx/Makefile deleted file mode 100644 index 41efaf9ad50b..000000000000 --- a/arch/arm/mach-ns9xxx/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -obj-y := clock.o generic.o gpio.o irq.o - -obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o -obj-$(CONFIG_MACH_CC9P9360JS) += mach-cc9p9360js.o - -obj-$(CONFIG_PROCESSOR_NS9360) += gpio-ns9360.o processor-ns9360.o time-ns9360.o - -obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o -obj-$(CONFIG_BOARD_JSCC9P9360) += board-jscc9p9360.o - -# platform devices -obj-$(CONFIG_NS9XXX_HAVE_SERIAL8250) += plat-serial8250.o diff --git a/arch/arm/mach-ns9xxx/Makefile.boot b/arch/arm/mach-ns9xxx/Makefile.boot deleted file mode 100644 index 54654919229b..000000000000 --- a/arch/arm/mach-ns9xxx/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ -zreladdr-y := 0x8000 -params_phys-y := 0x100 diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c deleted file mode 100644 index e27687d53504..000000000000 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/board-a9m9750dev.c - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <linux/irq.h> - -#include <asm/mach/map.h> -#include <asm/gpio.h> - -#include <mach/board.h> -#include <mach/processor-ns9360.h> -#include <mach/regs-sys-ns9360.h> -#include <mach/regs-mem.h> -#include <mach/regs-bbu.h> -#include <mach/regs-board-a9m9750dev.h> - -#include "board-a9m9750dev.h" - -static struct map_desc board_a9m9750dev_io_desc[] __initdata = { - { /* FPGA on CS0 */ - .virtual = io_p2v(NS9XXX_CSxSTAT_PHYS(0)), - .pfn = __phys_to_pfn(NS9XXX_CSxSTAT_PHYS(0)), - .length = NS9XXX_CS0STAT_LENGTH, - .type = MT_DEVICE, - }, -}; - -void __init board_a9m9750dev_map_io(void) -{ - iotable_init(board_a9m9750dev_io_desc, - ARRAY_SIZE(board_a9m9750dev_io_desc)); -} - -static void a9m9750dev_fpga_ack_irq(struct irq_data *d) -{ - /* nothing */ -} - -static void a9m9750dev_fpga_mask_irq(struct irq_data *d) -{ - u8 ier; - - ier = __raw_readb(FPGA_IER); - - ier &= ~(1 << (d->irq - FPGA_IRQ(0))); - - __raw_writeb(ier, FPGA_IER); -} - -static void a9m9750dev_fpga_maskack_irq(struct irq_data *d) -{ - a9m9750dev_fpga_mask_irq(d); - a9m9750dev_fpga_ack_irq(d); -} - -static void a9m9750dev_fpga_unmask_irq(struct irq_data *d) -{ - u8 ier; - - ier = __raw_readb(FPGA_IER); - - ier |= 1 << (d->irq - FPGA_IRQ(0)); - - __raw_writeb(ier, FPGA_IER); -} - -static struct irq_chip a9m9750dev_fpga_chip = { - .irq_ack = a9m9750dev_fpga_ack_irq, - .irq_mask = a9m9750dev_fpga_mask_irq, - .irq_mask_ack = a9m9750dev_fpga_maskack_irq, - .irq_unmask = a9m9750dev_fpga_unmask_irq, -}; - -static void a9m9750dev_fpga_demux_handler(unsigned int irq, - struct irq_desc *desc) -{ - u8 stat = __raw_readb(FPGA_ISR); - - desc->irq_data.chip->irq_mask_ack(&desc->irq_data); - - while (stat != 0) { - int irqno = fls(stat) - 1; - - stat &= ~(1 << irqno); - - generic_handle_irq(FPGA_IRQ(irqno)); - } - - desc->irq_data.chip->irq_unmask(&desc->irq_data); -} - -void __init board_a9m9750dev_init_irq(void) -{ - u32 eic; - int i; - - if (gpio_request(11, "board a9m9750dev extirq2") == 0) - ns9360_gpio_configure(11, 0, 1); - else - printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_NS9XXX_EXT2\n", - __func__); - - for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) { - irq_set_chip_and_handler(i, &a9m9750dev_fpga_chip, - handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } - - /* IRQ_NS9XXX_EXT2: level sensitive + active low */ - eic = __raw_readl(SYS_EIC(2)); - REGSET(eic, SYS_EIC, PLTY, AL); - REGSET(eic, SYS_EIC, LVEDG, LEVEL); - __raw_writel(eic, SYS_EIC(2)); - - irq_set_chained_handler(IRQ_NS9XXX_EXT2, - a9m9750dev_fpga_demux_handler); -} - -void __init board_a9m9750dev_init_machine(void) -{ - u32 reg; - - /* setup static CS0: memory base ... */ - reg = __raw_readl(SYS_SMCSSMB(0)); - REGSETIM(reg, SYS_SMCSSMB, CSxB, NS9XXX_CSxSTAT_PHYS(0) >> 12); - __raw_writel(reg, SYS_SMCSSMB(0)); - - /* ... and mask */ - reg = __raw_readl(SYS_SMCSSMM(0)); - REGSETIM(reg, SYS_SMCSSMM, CSxM, 0xfffff); - REGSET(reg, SYS_SMCSSMM, CSEx, EN); - __raw_writel(reg, SYS_SMCSSMM(0)); - - /* setup static CS0: memory configuration */ - reg = __raw_readl(MEM_SMC(0)); - REGSET(reg, MEM_SMC, PSMC, OFF); - REGSET(reg, MEM_SMC, BSMC, OFF); - REGSET(reg, MEM_SMC, EW, OFF); - REGSET(reg, MEM_SMC, PB, 1); - REGSET(reg, MEM_SMC, PC, AL); - REGSET(reg, MEM_SMC, PM, DIS); - REGSET(reg, MEM_SMC, MW, 8); - __raw_writel(reg, MEM_SMC(0)); - - /* setup static CS0: timing */ - __raw_writel(0x2, MEM_SMWED(0)); - __raw_writel(0x2, MEM_SMOED(0)); - __raw_writel(0x6, MEM_SMRD(0)); - __raw_writel(0x6, MEM_SMWD(0)); -} diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.h b/arch/arm/mach-ns9xxx/board-a9m9750dev.h deleted file mode 100644 index edc75abbc5dd..000000000000 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/board-a9m9750dev.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <linux/init.h> - -void __init board_a9m9750dev_map_io(void); -void __init board_a9m9750dev_init_machine(void); -void __init board_a9m9750dev_init_irq(void); diff --git a/arch/arm/mach-ns9xxx/board-jscc9p9360.c b/arch/arm/mach-ns9xxx/board-jscc9p9360.c deleted file mode 100644 index 4bd3eec04bfe..000000000000 --- a/arch/arm/mach-ns9xxx/board-jscc9p9360.c +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/board-jscc9p9360.c - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include "board-jscc9p9360.h" - -void __init board_jscc9p9360_init_machine(void) -{ - /* TODO: reserve GPIOs for push buttons, etc pp */ -} - diff --git a/arch/arm/mach-ns9xxx/board-jscc9p9360.h b/arch/arm/mach-ns9xxx/board-jscc9p9360.h deleted file mode 100644 index 1a81a074df45..000000000000 --- a/arch/arm/mach-ns9xxx/board-jscc9p9360.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/board-jscc9p9360.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <linux/init.h> - -void __init board_jscc9p9360_init_machine(void); diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c deleted file mode 100644 index cf81cbc57544..000000000000 --- a/arch/arm/mach-ns9xxx/clock.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/clock.c - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <linux/err.h> -#include <linux/module.h> -#include <linux/list.h> -#include <linux/clk.h> -#include <linux/string.h> -#include <linux/platform_device.h> -#include <linux/semaphore.h> - -#include "clock.h" - -static LIST_HEAD(clocks); -static DEFINE_SPINLOCK(clk_lock); - -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *p, *ret = NULL, *retgen = NULL; - unsigned long flags; - int idno; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - spin_lock_irqsave(&clk_lock, flags); - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0) { - if (p->id == idno) { - if (!try_module_get(p->owner)) - continue; - ret = p; - break; - } else if (p->id == -1) - /* remember match with id == -1 in case there is - * no clock for idno */ - retgen = p; - } - } - - if (!ret && retgen && try_module_get(retgen->owner)) - ret = retgen; - - if (ret) - ++ret->refcount; - - spin_unlock_irqrestore(&clk_lock, flags); - - return ret ? ret : ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ - module_put(clk->owner); - --clk->refcount; -} -EXPORT_SYMBOL(clk_put); - -static int clk_enable_unlocked(struct clk *clk) -{ - int ret = 0; - if (clk->parent) { - ret = clk_enable_unlocked(clk->parent); - if (ret) - return ret; - } - - if (clk->usage++ == 0 && clk->endisable) - ret = clk->endisable(clk, 1); - - return ret; -} - -int clk_enable(struct clk *clk) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&clk_lock, flags); - - ret = clk_enable_unlocked(clk); - - spin_unlock_irqrestore(&clk_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -static void clk_disable_unlocked(struct clk *clk) -{ - if (--clk->usage == 0 && clk->endisable) - clk->endisable(clk, 0); - - if (clk->parent) - clk_disable_unlocked(clk->parent); -} - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&clk_lock, flags); - - clk_disable_unlocked(clk); - - spin_unlock_irqrestore(&clk_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - if (clk->get_rate) - return clk->get_rate(clk); - - if (clk->rate) - return clk->rate; - - if (clk->parent) - return clk_get_rate(clk->parent); - - return 0; -} -EXPORT_SYMBOL(clk_get_rate); - -int clk_register(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&clk_lock, flags); - - list_add(&clk->node, &clocks); - - if (clk->parent) - ++clk->parent->refcount; - - spin_unlock_irqrestore(&clk_lock, flags); - - return 0; -} - -int clk_unregister(struct clk *clk) -{ - int ret = 0; - unsigned long flags; - - spin_lock_irqsave(&clk_lock, flags); - - if (clk->usage || clk->refcount) - ret = -EBUSY; - else - list_del(&clk->node); - - if (clk->parent) - --clk->parent->refcount; - - spin_unlock_irqrestore(&clk_lock, flags); - - return ret; -} - -#if defined CONFIG_DEBUG_FS - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -static int clk_debugfs_show(struct seq_file *s, void *null) -{ - unsigned long flags; - struct clk *p; - - spin_lock_irqsave(&clk_lock, flags); - - list_for_each_entry(p, &clocks, node) - seq_printf(s, "%s.%d: usage=%lu refcount=%lu rate=%lu\n", - p->name, p->id, p->usage, p->refcount, - p->usage ? clk_get_rate(p) : 0); - - spin_unlock_irqrestore(&clk_lock, flags); - - return 0; -} - -static int clk_debugfs_open(struct inode *inode, struct file *file) -{ - return single_open(file, clk_debugfs_show, NULL); -} - -static const struct file_operations clk_debugfs_operations = { - .open = clk_debugfs_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init clk_debugfs_init(void) -{ - struct dentry *dentry; - - dentry = debugfs_create_file("clk", S_IFREG | S_IRUGO, NULL, NULL, - &clk_debugfs_operations); - return IS_ERR(dentry) ? PTR_ERR(dentry) : 0; -} -subsys_initcall(clk_debugfs_init); - -#endif /* if defined CONFIG_DEBUG_FS */ diff --git a/arch/arm/mach-ns9xxx/clock.h b/arch/arm/mach-ns9xxx/clock.h deleted file mode 100644 index b86c30dd79eb..000000000000 --- a/arch/arm/mach-ns9xxx/clock.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/clock.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __NS9XXX_CLOCK_H -#define __NS9XXX_CLOCK_H - -#include <linux/list.h> - -struct clk { - struct module *owner; - const char *name; - int id; - - struct clk *parent; - - unsigned long rate; - int (*endisable)(struct clk *, int enable); - unsigned long (*get_rate)(struct clk *); - - struct list_head node; - unsigned long refcount; - unsigned long usage; -}; - -int clk_register(struct clk *clk); -int clk_unregister(struct clk *clk); - -#endif /* ifndef __NS9XXX_CLOCK_H */ diff --git a/arch/arm/mach-ns9xxx/generic.c b/arch/arm/mach-ns9xxx/generic.c deleted file mode 100644 index 1e0f467879cc..000000000000 --- a/arch/arm/mach-ns9xxx/generic.c +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/generic.c - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/memory.h> - -#include "generic.h" - -void __init ns9xxx_init_machine(void) -{ -} diff --git a/arch/arm/mach-ns9xxx/generic.h b/arch/arm/mach-ns9xxx/generic.h deleted file mode 100644 index 82493191aad6..000000000000 --- a/arch/arm/mach-ns9xxx/generic.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/generic.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <linux/time.h> -#include <asm/mach/time.h> -#include <linux/init.h> - -void __init ns9xxx_init_irq(void); -void __init ns9xxx_init_machine(void); diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.c b/arch/arm/mach-ns9xxx/gpio-ns9360.c deleted file mode 100644 index 377330c1b250..000000000000 --- a/arch/arm/mach-ns9xxx/gpio-ns9360.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/gpio-ns9360.c - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <linux/bug.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/module.h> - -#include <mach/regs-bbu.h> -#include <mach/processor-ns9360.h> - -#include "gpio-ns9360.h" - -static inline int ns9360_valid_gpio(unsigned gpio) -{ - return gpio <= 72; -} - -static inline void __iomem *ns9360_gpio_get_gconfaddr(unsigned gpio) -{ - if (gpio < 56) - return BBU_GCONFb1(gpio / 8); - else - /* - * this could be optimised away on - * ns9750 only builds, but it isn't ... - */ - return BBU_GCONFb2((gpio - 56) / 8); -} - -static inline void __iomem *ns9360_gpio_get_gctrladdr(unsigned gpio) -{ - if (gpio < 32) - return BBU_GCTRL1; - else if (gpio < 64) - return BBU_GCTRL2; - else - /* this could be optimised away on ns9750 only builds */ - return BBU_GCTRL3; -} - -static inline void __iomem *ns9360_gpio_get_gstataddr(unsigned gpio) -{ - if (gpio < 32) - return BBU_GSTAT1; - else if (gpio < 64) - return BBU_GSTAT2; - else - /* this could be optimised away on ns9750 only builds */ - return BBU_GSTAT3; -} - -/* - * each gpio can serve for 4 different purposes [0..3]. These are called - * "functions" and passed in the parameter func. Functions 0-2 are always some - * special things, function 3 is GPIO. If func == 3 dir specifies input or - * output, and with inv you can enable an inverter (independent of func). - */ -int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func) -{ - void __iomem *conf = ns9360_gpio_get_gconfaddr(gpio); - u32 confval; - - confval = __raw_readl(conf); - REGSETIM_IDX(confval, BBU_GCONFx, DIR, gpio & 7, dir); - REGSETIM_IDX(confval, BBU_GCONFx, INV, gpio & 7, inv); - REGSETIM_IDX(confval, BBU_GCONFx, FUNC, gpio & 7, func); - __raw_writel(confval, conf); - - return 0; -} - -int ns9360_gpio_configure(unsigned gpio, int inv, int func) -{ - if (likely(ns9360_valid_gpio(gpio))) { - if (func == 3) { - printk(KERN_WARNING "use gpio_direction_input " - "or gpio_direction_output\n"); - return -EINVAL; - } else - return __ns9360_gpio_configure(gpio, 0, inv, func); - } else - return -EINVAL; -} -EXPORT_SYMBOL(ns9360_gpio_configure); - -int ns9360_gpio_get_value(unsigned gpio) -{ - void __iomem *stat = ns9360_gpio_get_gstataddr(gpio); - int ret; - - ret = 1 & (__raw_readl(stat) >> (gpio & 31)); - - return ret; -} - -void ns9360_gpio_set_value(unsigned gpio, int value) -{ - void __iomem *ctrl = ns9360_gpio_get_gctrladdr(gpio); - u32 ctrlval; - - ctrlval = __raw_readl(ctrl); - - if (value) - ctrlval |= 1 << (gpio & 31); - else - ctrlval &= ~(1 << (gpio & 31)); - - __raw_writel(ctrlval, ctrl); -} diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.h b/arch/arm/mach-ns9xxx/gpio-ns9360.h deleted file mode 100644 index 131cd1715caa..000000000000 --- a/arch/arm/mach-ns9xxx/gpio-ns9360.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/gpio-ns9360.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func); -int ns9360_gpio_get_value(unsigned gpio); -void ns9360_gpio_set_value(unsigned gpio, int value); diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c deleted file mode 100644 index 5503ca09c4ae..000000000000 --- a/arch/arm/mach-ns9xxx/gpio.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/gpio.c - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/compiler.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/bitops.h> - -#include <mach/gpio.h> -#include <mach/processor.h> -#include <mach/processor-ns9360.h> -#include <asm/bug.h> -#include <asm/types.h> - -#include "gpio-ns9360.h" - -#if defined(CONFIG_PROCESSOR_NS9360) -#define GPIO_MAX 72 -#elif defined(CONFIG_PROCESSOR_NS9750) -#define GPIO_MAX 49 -#endif - -/* protects BBU_GCONFx and BBU_GCTRLx */ -static spinlock_t gpio_lock = __SPIN_LOCK_UNLOCKED(gpio_lock); - -/* only access gpiores with atomic ops */ -static DECLARE_BITMAP(gpiores, GPIO_MAX + 1); - -static inline int ns9xxx_valid_gpio(unsigned gpio) -{ -#if defined(CONFIG_PROCESSOR_NS9360) - if (processor_is_ns9360()) - return gpio <= 72; - else -#endif -#if defined(CONFIG_PROCESSOR_NS9750) - if (processor_is_ns9750()) - return gpio <= 49; - else -#endif - { - BUG(); - return 0; - } -} - -int gpio_request(unsigned gpio, const char *label) -{ - if (likely(ns9xxx_valid_gpio(gpio))) - return test_and_set_bit(gpio, gpiores) ? -EBUSY : 0; - else - return -EINVAL; -} -EXPORT_SYMBOL(gpio_request); - -void gpio_free(unsigned gpio) -{ - might_sleep(); - clear_bit(gpio, gpiores); - return; -} -EXPORT_SYMBOL(gpio_free); - -int gpio_direction_input(unsigned gpio) -{ - if (likely(ns9xxx_valid_gpio(gpio))) { - int ret = -EINVAL; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); -#if defined(CONFIG_PROCESSOR_NS9360) - if (processor_is_ns9360()) - ret = __ns9360_gpio_configure(gpio, 0, 0, 3); - else -#endif - BUG(); - - spin_unlock_irqrestore(&gpio_lock, flags); - - return ret; - - } else - return -EINVAL; -} -EXPORT_SYMBOL(gpio_direction_input); - -int gpio_direction_output(unsigned gpio, int value) -{ - if (likely(ns9xxx_valid_gpio(gpio))) { - int ret = -EINVAL; - unsigned long flags; - - gpio_set_value(gpio, value); - - spin_lock_irqsave(&gpio_lock, flags); -#if defined(CONFIG_PROCESSOR_NS9360) - if (processor_is_ns9360()) - ret = __ns9360_gpio_configure(gpio, 1, 0, 3); - else -#endif - BUG(); - - spin_unlock_irqrestore(&gpio_lock, flags); - - return ret; - } else - return -EINVAL; -} -EXPORT_SYMBOL(gpio_direction_output); - -int gpio_get_value(unsigned gpio) -{ -#if defined(CONFIG_PROCESSOR_NS9360) - if (processor_is_ns9360()) - return ns9360_gpio_get_value(gpio); - else -#endif - { - BUG(); - return -EINVAL; - } -} -EXPORT_SYMBOL(gpio_get_value); - -void gpio_set_value(unsigned gpio, int value) -{ - unsigned long flags; - spin_lock_irqsave(&gpio_lock, flags); -#if defined(CONFIG_PROCESSOR_NS9360) - if (processor_is_ns9360()) - ns9360_gpio_set_value(gpio, value); - else -#endif - BUG(); - - spin_unlock_irqrestore(&gpio_lock, flags); -} -EXPORT_SYMBOL(gpio_set_value); diff --git a/arch/arm/mach-ns9xxx/include/mach/board.h b/arch/arm/mach-ns9xxx/include/mach/board.h deleted file mode 100644 index 19ca6de46a45..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/board.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/board.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_BOARD_H -#define __ASM_ARCH_BOARD_H - -#include <asm/mach-types.h> - -#define board_is_a9m9750dev() (0 \ - || machine_is_cc9p9750dev() \ - ) - -#define board_is_a9mvali() (0 \ - || machine_is_cc9p9750val() \ - ) - -#define board_is_jscc9p9210() (0 \ - || machine_is_cc9p9210js() \ - ) - -#define board_is_jscc9p9215() (0 \ - || machine_is_cc9p9215js() \ - ) - -#define board_is_jscc9p9360() (0 \ - || machine_is_cc9p9360js() \ - ) - -#define board_is_uncbas() (0 \ - || machine_is_cc7ucamry() \ - ) - -#endif /* ifndef __ASM_ARCH_BOARD_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S deleted file mode 100644 index 5a2acbdc3d67..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/debug-macro.S - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <mach/hardware.h> -#include <asm/memory.h> - -#include <mach/regs-board-a9m9750dev.h> - - .macro addruart, rp, rv - ldr \rp, =NS9XXX_CSxSTAT_PHYS(0) - ldr \rv, =io_p2v(NS9XXX_CSxSTAT_PHYS(0)) - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-ns9xxx/include/mach/entry-macro.S b/arch/arm/mach-ns9xxx/include/mach/entry-macro.S deleted file mode 100644 index 71ca0319b547..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/entry-macro.S +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/entry-macro.S - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <mach/hardware.h> -#include <mach/regs-sys-common.h> - - .macro get_irqnr_preamble, base, tmp - ldr \base, =SYS_ISRADDR - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)] - cmp \irqstat, #0 - ldrne \irqnr, [\base] - .endm - - .macro disable_fiq - .endm diff --git a/arch/arm/mach-ns9xxx/include/mach/gpio.h b/arch/arm/mach-ns9xxx/include/mach/gpio.h deleted file mode 100644 index 5eb349032579..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/gpio.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/gpio.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. -*/ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#include <asm/errno.h> - -int gpio_request(unsigned gpio, const char *label); - -void gpio_free(unsigned gpio); - -int ns9xxx_gpio_configure(unsigned gpio, int inv, int func); - -int gpio_direction_input(unsigned gpio); - -int gpio_direction_output(unsigned gpio, int value); - -int gpio_get_value(unsigned gpio); - -void gpio_set_value(unsigned gpio, int value); - -/* - * ns9xxx can use gpio pins to trigger an irq, but it's not generic - * enough to be supported by the gpio_to_irq/irq_to_gpio interface - */ -static inline int gpio_to_irq(unsigned gpio) -{ - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return -EINVAL; -} - -/* get the cansleep() stubs */ -#include <asm-generic/gpio.h> - -#endif /* ifndef __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/hardware.h b/arch/arm/mach-ns9xxx/include/mach/hardware.h deleted file mode 100644 index 76631128e11c..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/hardware.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/hardware.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* - * NetSilicon NS9xxx internal mapping: - * - * physical <--> virtual - * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff - * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff - */ -#define io_p2v(x) (0xf0000000 \ - + (((x) & 0xf0000000) >> 4) \ - + ((x) & 0x00ffffff)) - -#define io_v2p(x) ((((x) & 0x0f000000) << 4) \ - + ((x) & 0x00ffffff)) - -#define __REGSHIFT(mask) ((mask) & (-(mask))) - -#define __REGBIT(bit) ((u32)1 << (bit)) -#define __REGBITS(hbit, lbit) ((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit)) -#define __REGVAL(mask, value) (((value) * __REGSHIFT(mask)) & (mask)) - -#ifndef __ASSEMBLY__ - -# define __REG(x) ((void __iomem __force *)io_p2v((x))) -# define __REG2(x, y) ((void __iomem __force *)(io_p2v((x)) + 4 * (y))) - -# define __REGSET(var, field, value) \ - ((var) = (((var) & ~((field) & ~(value))) | (value))) - -# define REGSET(var, reg, field, value) \ - __REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value) - -# define REGSET_IDX(var, reg, field, idx, value) \ - __REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx))) - -# define REGSETIM(var, reg, field, value) \ - __REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value))) - -# define REGSETIM_IDX(var, reg, field, idx, value) \ - __REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value))) - -# define __REGGET(var, field) \ - (((var) & (field))) - -# define REGGET(var, reg, field) \ - __REGGET(var, reg ## _ ## field) - -# define REGGET_IDX(var, reg, field, idx) \ - __REGGET(var, reg ## _ ## field((idx))) - -# define REGGETIM(var, reg, field) \ - __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field) - -# define REGGETIM_IDX(var, reg, field, idx) \ - __REGGET(var, reg ## _ ## field((idx))) / \ - __REGSHIFT(reg ## _ ## field((idx))) - -#else - -# define __REG(x) io_p2v(x) -# define __REG2(x, y) io_p2v((x) + 4 * (y)) - -#endif - -#endif /* ifndef __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/io.h b/arch/arm/mach-ns9xxx/include/mach/io.h deleted file mode 100644 index f08451d2e1bc..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/io.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff /* XXX */ - -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) -#define __mem_isa(a) (IO_BASE + (a)) - -#endif /* ifndef __ASM_ARCH_IO_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/irqs.h b/arch/arm/mach-ns9xxx/include/mach/irqs.h deleted file mode 100644 index 13483949e210..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/irqs.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/irqs.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -/* NetSilicon 9360 */ -#define IRQ_NS9XXX_WATCHDOG 0 -#define IRQ_NS9XXX_AHBBUSERR 1 -#define IRQ_NS9360_BBUSAGG 2 -/* irq 3 is reserved for NS9360 */ -#define IRQ_NS9XXX_ETHRX 4 -#define IRQ_NS9XXX_ETHTX 5 -#define IRQ_NS9XXX_ETHPHY 6 -#define IRQ_NS9360_LCD 7 -#define IRQ_NS9360_SERBRX 8 -#define IRQ_NS9360_SERBTX 9 -#define IRQ_NS9360_SERARX 10 -#define IRQ_NS9360_SERATX 11 -#define IRQ_NS9360_SERCRX 12 -#define IRQ_NS9360_SERCTX 13 -#define IRQ_NS9360_I2C 14 -#define IRQ_NS9360_BBUSDMA 15 -#define IRQ_NS9360_TIMER0 16 -#define IRQ_NS9360_TIMER1 17 -#define IRQ_NS9360_TIMER2 18 -#define IRQ_NS9360_TIMER3 19 -#define IRQ_NS9360_TIMER4 20 -#define IRQ_NS9360_TIMER5 21 -#define IRQ_NS9360_TIMER6 22 -#define IRQ_NS9360_TIMER7 23 -#define IRQ_NS9360_RTC 24 -#define IRQ_NS9360_USBHOST 25 -#define IRQ_NS9360_USBDEVICE 26 -#define IRQ_NS9360_IEEE1284 27 -#define IRQ_NS9XXX_EXT0 28 -#define IRQ_NS9XXX_EXT1 29 -#define IRQ_NS9XXX_EXT2 30 -#define IRQ_NS9XXX_EXT3 31 - -#define BBUS_IRQ(irq) (32 + irq) - -#define IRQ_BBUS_DMA BBUS_IRQ(0) -#define IRQ_BBUS_SERBRX BBUS_IRQ(2) -#define IRQ_BBUS_SERBTX BBUS_IRQ(3) -#define IRQ_BBUS_SERARX BBUS_IRQ(4) -#define IRQ_BBUS_SERATX BBUS_IRQ(5) -#define IRQ_BBUS_SERCRX BBUS_IRQ(6) -#define IRQ_BBUS_SERCTX BBUS_IRQ(7) -#define IRQ_BBUS_SERDRX BBUS_IRQ(8) -#define IRQ_BBUS_SERDTX BBUS_IRQ(9) -#define IRQ_BBUS_I2C BBUS_IRQ(10) -#define IRQ_BBUS_1284 BBUS_IRQ(11) -#define IRQ_BBUS_UTIL BBUS_IRQ(12) -#define IRQ_BBUS_RTC BBUS_IRQ(13) -#define IRQ_BBUS_USBHST BBUS_IRQ(14) -#define IRQ_BBUS_USBDEV BBUS_IRQ(15) -#define IRQ_BBUS_AHBDMA1 BBUS_IRQ(24) -#define IRQ_BBUS_AHBDMA2 BBUS_IRQ(25) - -/* - * these Interrupts are specific for the a9m9750dev board. - * They are generated by an FPGA that interrupts the CPU on - * IRQ_NS9360_EXT2 - */ -#define FPGA_IRQ(irq) (64 + irq) - -#define IRQ_FPGA_UARTA FPGA_IRQ(0) -#define IRQ_FPGA_UARTB FPGA_IRQ(1) -#define IRQ_FPGA_UARTC FPGA_IRQ(2) -#define IRQ_FPGA_UARTD FPGA_IRQ(3) -#define IRQ_FPGA_TOUCH FPGA_IRQ(4) -#define IRQ_FPGA_CF FPGA_IRQ(5) -#define IRQ_FPGA_CAN0 FPGA_IRQ(6) -#define IRQ_FPGA_CAN1 FPGA_IRQ(7) - -#define NR_IRQS 72 - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/memory.h b/arch/arm/mach-ns9xxx/include/mach/memory.h deleted file mode 100644 index 5c65aee6e7a9..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/memory.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/memory.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. -*/ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* x in [0..3] */ -#define NS9XXX_CSxSTAT_PHYS(x) UL(((x) + 4) << 28) - -#define NS9XXX_CS0STAT_LENGTH UL(0x1000) -#define NS9XXX_CS1STAT_LENGTH UL(0x1000) -#define NS9XXX_CS2STAT_LENGTH UL(0x1000) -#define NS9XXX_CS3STAT_LENGTH UL(0x1000) - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-ns9xxx/include/mach/module.h b/arch/arm/mach-ns9xxx/include/mach/module.h deleted file mode 100644 index 628e9752589b..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/module.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/module.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_MODULE_H -#define __ASM_ARCH_MODULE_H - -#include <asm/mach-types.h> - -#define module_is_cc7ucamry() (0 \ - || machine_is_cc7ucamry() \ - ) - -#define module_is_cc9c() (0 \ - ) - -#define module_is_cc9p9210() (0 \ - || machine_is_cc9p9210() \ - || machine_is_cc9p9210js() \ - ) - -#define module_is_cc9p9215() (0 \ - || machine_is_cc9p9215() \ - || machine_is_cc9p9215js() \ - ) - -#define module_is_cc9p9360() (0 \ - || machine_is_cc9p9360dev() \ - || machine_is_cc9p9360js() \ - ) - -#define module_is_cc9p9750() (0 \ - || machine_is_a9m9750() \ - || machine_is_cc9p9750js() \ - || machine_is_cc9p9750val() \ - ) - -#define module_is_ccw9c() (0 \ - ) - -#define module_is_inc20otter() (0 \ - || machine_is_inc20otter() \ - ) - -#define module_is_otter() (0 \ - || machine_is_otter() \ - ) - -#endif /* ifndef __ASM_ARCH_MODULE_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h deleted file mode 100644 index f41deda5129e..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_PROCESSORNS9360_H -#define __ASM_ARCH_PROCESSORNS9360_H - -#include <linux/init.h> - -void ns9360_reset(char mode); - -unsigned long ns9360_systemclock(void) __attribute__((const)); - -static inline unsigned long ns9360_cpuclock(void) __attribute__((const)); -static inline unsigned long ns9360_cpuclock(void) -{ - return ns9360_systemclock() / 2; -} - -void __init ns9360_map_io(void); - -extern struct sys_timer ns9360_timer; - -int ns9360_gpio_configure(unsigned gpio, int inv, int func); - -#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/processor.h b/arch/arm/mach-ns9xxx/include/mach/processor.h deleted file mode 100644 index 9f77f746a386..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/processor.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/processor.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_PROCESSOR_H -#define __ASM_ARCH_PROCESSOR_H - -#include <mach/module.h> - -#define processor_is_ns9210() (0 \ - || module_is_cc7ucamry() \ - || module_is_cc9p9210() \ - || module_is_inc20otter() \ - || module_is_otter() \ - ) - -#define processor_is_ns9215() (0 \ - || module_is_cc9p9215() \ - ) - -#define processor_is_ns9360() (0 \ - || module_is_cc9p9360() \ - || module_is_cc9c() \ - || module_is_ccw9c() \ - ) - -#define processor_is_ns9750() (0 \ - || module_is_cc9p9750() \ - ) - -#define processor_is_ns921x() (0 \ - || processor_is_ns9210() \ - || processor_is_ns9215() \ - ) - -#endif /* ifndef __ASM_ARCH_PROCESSOR_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h b/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h deleted file mode 100644 index af227c058fb9..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/regs-bbu.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_REGSBBU_H -#define __ASM_ARCH_REGSBBU_H - -#include <mach/hardware.h> - -/* BBus Utility */ - -/* GPIO Configuration Registers block 1 */ -/* NOTE: the HRM starts counting at 1 for the GPIO registers, here the start is - * at 0 for each block. That is, BBU_GCONFb1(0) is GPIO Configuration Register - * #1, BBU_GCONFb2(0) is GPIO Configuration Register #8. */ -#define BBU_GCONFb1(x) __REG2(0x90600010, (x)) -#define BBU_GCONFb2(x) __REG2(0x90600100, (x)) - -#define BBU_GCONFx_DIR(m) __REGBIT(3 + (((m) & 7) << 2)) -#define BBU_GCONFx_DIR_INPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 0) -#define BBU_GCONFx_DIR_OUTPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 1) -#define BBU_GCONFx_INV(m) __REGBIT(2 + (((m) & 7) << 2)) -#define BBU_GCONFx_INV_NO(m) __REGVAL(BBU_GCONFx_INV(m), 0) -#define BBU_GCONFx_INV_YES(m) __REGVAL(BBU_GCONFx_INV(m), 1) -#define BBU_GCONFx_FUNC(m) __REGBITS(1 + (((m) & 7) << 2), ((m) & 7) << 2) -#define BBU_GCONFx_FUNC_0(m) __REGVAL(BBU_GCONFx_FUNC(m), 0) -#define BBU_GCONFx_FUNC_1(m) __REGVAL(BBU_GCONFx_FUNC(m), 1) -#define BBU_GCONFx_FUNC_2(m) __REGVAL(BBU_GCONFx_FUNC(m), 2) -#define BBU_GCONFx_FUNC_3(m) __REGVAL(BBU_GCONFx_FUNC(m), 3) - -#define BBU_GCTRL1 __REG(0x90600030) -#define BBU_GCTRL2 __REG(0x90600034) -#define BBU_GCTRL3 __REG(0x90600120) - -#define BBU_GSTAT1 __REG(0x90600040) -#define BBU_GSTAT2 __REG(0x90600044) -#define BBU_GSTAT3 __REG(0x90600130) - -#endif /* ifndef __ASM_ARCH_REGSBBU_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h b/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h deleted file mode 100644 index cd1593693f56..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_REGSBOARDA9M9750_H -#define __ASM_ARCH_REGSBOARDA9M9750_H - -#include <mach/hardware.h> - -#define FPGA_UARTA_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0)) -#define FPGA_UARTB_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08) -#define FPGA_UARTC_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10) -#define FPGA_UARTD_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18) - -#define FPGA_IER __REG(NS9XXX_CSxSTAT_PHYS(0) + 0x50) -#define FPGA_ISR __REG(NS9XXX_CSxSTAT_PHYS(0) + 0x60) - -#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-mem.h b/arch/arm/mach-ns9xxx/include/mach/regs-mem.h deleted file mode 100644 index f1625bf8cdce..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/regs-mem.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/regs-mem.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_REGSMEM_H -#define __ASM_ARCH_REGSMEM_H - -#include <mach/hardware.h> - -/* Memory Module */ - -/* Control register */ -#define MEM_CTRL __REG(0xa0700000) - -/* Status register */ -#define MEM_STAT __REG(0xa0700004) - -/* Configuration register */ -#define MEM_CONF __REG(0xa0700008) - -/* Dynamic Memory Control register */ -#define MEM_DMCTRL __REG(0xa0700020) - -/* Dynamic Memory Refresh Timer */ -#define MEM_DMRT __REG(0xa0700024) - -/* Dynamic Memory Read Configuration register */ -#define MEM_DMRC __REG(0xa0700028) - -/* Dynamic Memory Precharge Command Period (tRP) */ -#define MEM_DMPCP __REG(0xa0700030) - -/* Dynamic Memory Active to Precharge Command Period (tRAS) */ -#define MEM_DMAPCP __REG(0xa0700034) - -/* Dynamic Memory Self-Refresh Exit Time (tSREX) */ -#define MEM_DMSRET __REG(0xa0700038) - -/* Dynamic Memory Last Data Out to Active Time (tAPR) */ -#define MEM_DMLDOAT __REG(0xa070003c) - -/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */ -#define MEM_DMDIACT __REG(0xa0700040) - -/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */ -#define MEM_DMWRT __REG(0xa0700044) - -/* Dynamic Memory Active to Active Command Period (tRC) */ -#define MEM_DMAACP __REG(0xa0700048) - -/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */ -#define MEM_DMARP __REG(0xa070004c) - -/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */ -#define MEM_DMESRAC __REG(0xa0700050) - -/* Dynamic Memory Active Bank A to Active B Time (tRRD) */ -#define MEM_DMABAABT __REG(0xa0700054) - -/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */ -#define MEM_DMLMACT __REG(0xa0700058) - -/* Static Memory Extended Wait */ -#define MEM_SMEW __REG(0xa0700080) - -/* Dynamic Memory Configuration Register x */ -#define MEM_DMCONF(x) __REG2(0xa0700100, (x) << 3) - -/* Dynamic Memory RAS and CAS Delay x */ -#define MEM_DMRCD(x) __REG2(0xa0700104, (x) << 3) - -/* Static Memory Configuration Register x */ -#define MEM_SMC(x) __REG2(0xa0700200, (x) << 3) - -/* Static Memory Configuration Register x: Write protect */ -#define MEM_SMC_PSMC __REGBIT(20) -#define MEM_SMC_PSMC_OFF __REGVAL(MEM_SMC_PSMC, 0) -#define MEM_SMC_PSMC_ON __REGVAL(MEM_SMC_PSMC, 1) - -/* Static Memory Configuration Register x: Buffer enable */ -#define MEM_SMC_BSMC __REGBIT(19) -#define MEM_SMC_BSMC_OFF __REGVAL(MEM_SMC_BSMC, 0) -#define MEM_SMC_BSMC_ON __REGVAL(MEM_SMC_BSMC, 1) - -/* Static Memory Configuration Register x: Extended Wait */ -#define MEM_SMC_EW __REGBIT(8) -#define MEM_SMC_EW_OFF __REGVAL(MEM_SMC_EW, 0) -#define MEM_SMC_EW_ON __REGVAL(MEM_SMC_EW, 1) - -/* Static Memory Configuration Register x: Byte lane state */ -#define MEM_SMC_PB __REGBIT(7) -#define MEM_SMC_PB_0 __REGVAL(MEM_SMC_PB, 0) -#define MEM_SMC_PB_1 __REGVAL(MEM_SMC_PB, 1) - -/* Static Memory Configuration Register x: Chip select polarity */ -#define MEM_SMC_PC __REGBIT(6) -#define MEM_SMC_PC_AL __REGVAL(MEM_SMC_PC, 0) -#define MEM_SMC_PC_AH __REGVAL(MEM_SMC_PC, 1) - -/* static memory configuration register x: page mode*/ -#define MEM_SMC_PM __REGBIT(3) -#define MEM_SMC_PM_DIS __REGVAL(MEM_SMC_PM, 0) -#define MEM_SMC_PM_ASYNC __REGVAL(MEM_SMC_PM, 1) - -/* static memory configuration register x: Memory width */ -#define MEM_SMC_MW __REGBITS(1, 0) -#define MEM_SMC_MW_8 __REGVAL(MEM_SMC_MW, 0) -#define MEM_SMC_MW_16 __REGVAL(MEM_SMC_MW, 1) -#define MEM_SMC_MW_32 __REGVAL(MEM_SMC_MW, 2) - -/* Static Memory Write Enable Delay x */ -#define MEM_SMWED(x) __REG2(0xa0700204, (x) << 3) - -/* Static Memory Output Enable Delay x */ -#define MEM_SMOED(x) __REG2(0xa0700208, (x) << 3) - -/* Static Memory Read Delay x */ -#define MEM_SMRD(x) __REG2(0xa070020c, (x) << 3) - -/* Static Memory Page Mode Read Delay 0 */ -#define MEM_SMPMRD(x) __REG2(0xa0700210, (x) << 3) - -/* Static Memory Write Delay */ -#define MEM_SMWD(x) __REG2(0xa0700214, (x) << 3) - -/* Static Memory Turn Round Delay x */ -#define MEM_SWT(x) __REG2(0xa0700218, (x) << 3) - -#endif /* ifndef __ASM_ARCH_REGSMEM_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h deleted file mode 100644 index 14f91dfd5736..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_REGSSYSCOMMON_H -#define __ASM_ARCH_REGSSYSCOMMON_H -#include <mach/hardware.h> - -/* Interrupt Vector Address Register Level x */ -#define SYS_IVA(x) __REG2(0xa09000c4, (x)) - -/* Interrupt Configuration registers */ -#define SYS_IC(x) __REG2(0xa0900144, (x)) - -/* ISRADDR */ -#define SYS_ISRADDR __REG(0xa0900164) - -/* Interrupt Status Active */ -#define SYS_ISA __REG(0xa0900168) - -/* Interrupt Status Raw */ -#define SYS_ISR __REG(0xa090016c) - -#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h deleted file mode 100644 index 8ff254d9901c..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_REGSSYSNS9360_H -#define __ASM_ARCH_REGSSYSNS9360_H - -#include <mach/hardware.h> - -/* System Control Module */ - -/* AHB Arbiter Gen Configuration */ -#define SYS_AHBAGENCONF __REG(0xa0900000) - -/* BRC */ -#define SYS_BRC(x) __REG2(0xa0900004, (x)) - -/* Timer x Reload Count register */ -#define SYS_TRC(x) __REG2(0xa0900044, (x)) - -/* Timer x Read register */ -#define SYS_TR(x) __REG2(0xa0900084, (x)) - -/* Timer Interrupt Status register */ -#define SYS_TIS __REG(0xa0900170) - -/* PLL Configuration register */ -#define SYS_PLL __REG(0xa0900188) - -/* PLL FS status */ -#define SYS_PLL_FS __REGBITS(24, 23) - -/* PLL ND status */ -#define SYS_PLL_ND __REGBITS(20, 16) - -/* PLL Configuration register: PLL SW change */ -#define SYS_PLL_SWC __REGBIT(15) -#define SYS_PLL_SWC_NO __REGVAL(SYS_PLL_SWC, 0) -#define SYS_PLL_SWC_YES __REGVAL(SYS_PLL_SWC, 1) - -/* Timer x Control register */ -#define SYS_TC(x) __REG2(0xa0900190, (x)) - -/* Timer x Control register: Timer enable */ -#define SYS_TCx_TEN __REGBIT(15) -#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 0) -#define SYS_TCx_TEN_EN __REGVAL(SYS_TCx_TEN, 1) - -/* Timer x Control register: CPU debug mode */ -#define SYS_TCx_TDBG __REGBIT(10) -#define SYS_TCx_TDBG_CONT __REGVAL(SYS_TCx_TDBG, 0) -#define SYS_TCx_TDBG_STOP __REGVAL(SYS_TCx_TDBG, 1) - -/* Timer x Control register: Interrupt clear */ -#define SYS_TCx_INTC __REGBIT(9) -#define SYS_TCx_INTC_UNSET __REGVAL(SYS_TCx_INTC, 0) -#define SYS_TCx_INTC_SET __REGVAL(SYS_TCx_INTC, 1) - -/* Timer x Control register: Timer clock select */ -#define SYS_TCx_TLCS __REGBITS(8, 6) -#define SYS_TCx_TLCS_CPU __REGVAL(SYS_TCx_TLCS, 0) /* CPU clock */ -#define SYS_TCx_TLCS_DIV2 __REGVAL(SYS_TCx_TLCS, 1) /* CPU clock / 2 */ -#define SYS_TCx_TLCS_DIV4 __REGVAL(SYS_TCx_TLCS, 2) /* CPU clock / 4 */ -#define SYS_TCx_TLCS_DIV8 __REGVAL(SYS_TCx_TLCS, 3) /* CPU clock / 8 */ -#define SYS_TCx_TLCS_DIV16 __REGVAL(SYS_TCx_TLCS, 4) /* CPU clock / 16 */ -#define SYS_TCx_TLCS_DIV32 __REGVAL(SYS_TCx_TLCS, 5) /* CPU clock / 32 */ -#define SYS_TCx_TLCS_DIV64 __REGVAL(SYS_TCx_TLCS, 6) /* CPU clock / 64 */ -#define SYS_TCx_TLCS_EXT __REGVAL(SYS_TCx_TLCS, 7) - -/* Timer x Control register: Timer mode */ -#define SYS_TCx_TM __REGBITS(5, 4) -#define SYS_TCx_TM_IEE __REGVAL(SYS_TCx_TM, 0) /* Internal timer or external event */ -#define SYS_TCx_TM_ELL __REGVAL(SYS_TCx_TM, 1) /* External low-level, gated timer */ -#define SYS_TCx_TM_EHL __REGVAL(SYS_TCx_TM, 2) /* External high-level, gated timer */ -#define SYS_TCx_TM_CONCAT __REGVAL(SYS_TCx_TM, 3) /* Concatenate the lower timer. */ - -/* Timer x Control register: Interrupt select */ -#define SYS_TCx_INTS __REGBIT(3) -#define SYS_TCx_INTS_DIS __REGVAL(SYS_TCx_INTS, 0) -#define SYS_TCx_INTS_EN __REGVAL(SYS_TCx_INTS, 1) - -/* Timer x Control register: Up/down select */ -#define SYS_TCx_UDS __REGBIT(2) -#define SYS_TCx_UDS_UP __REGVAL(SYS_TCx_UDS, 0) -#define SYS_TCx_UDS_DOWN __REGVAL(SYS_TCx_UDS, 1) - -/* Timer x Control register: 32- or 16-bit timer */ -#define SYS_TCx_TSZ __REGBIT(1) -#define SYS_TCx_TSZ_16 __REGVAL(SYS_TCx_TSZ, 0) -#define SYS_TCx_TSZ_32 __REGVAL(SYS_TCx_TSZ, 1) - -/* Timer x Control register: Reload enable */ -#define SYS_TCx_REN __REGBIT(0) -#define SYS_TCx_REN_DIS __REGVAL(SYS_TCx_REN, 0) -#define SYS_TCx_REN_EN __REGVAL(SYS_TCx_REN, 1) - -/* System Memory Chip Select x Dynamic Memory Base */ -#define SYS_SMCSDMB(x) __REG2(0xa09001d0, (x) << 1) - -/* System Memory Chip Select x Dynamic Memory Mask */ -#define SYS_SMCSDMM(x) __REG2(0xa09001d4, (x) << 1) - -/* System Memory Chip Select x Static Memory Base */ -#define SYS_SMCSSMB(x) __REG2(0xa09001f0, (x) << 1) - -/* System Memory Chip Select x Static Memory Base: Chip select x base */ -#define SYS_SMCSSMB_CSxB __REGBITS(31, 12) - -/* System Memory Chip Select x Static Memory Mask */ -#define SYS_SMCSSMM(x) __REG2(0xa09001f4, (x) << 1) - -/* System Memory Chip Select x Static Memory Mask: Chip select x mask */ -#define SYS_SMCSSMM_CSxM __REGBITS(31, 12) - -/* System Memory Chip Select x Static Memory Mask: Chip select x enable */ -#define SYS_SMCSSMM_CSEx __REGBIT(0) -#define SYS_SMCSSMM_CSEx_DIS __REGVAL(SYS_SMCSSMM_CSEx, 0) -#define SYS_SMCSSMM_CSEx_EN __REGVAL(SYS_SMCSSMM_CSEx, 1) - -/* General purpose, user-defined ID register */ -#define SYS_GENID __REG(0xa0900210) - -/* External Interrupt x Control register */ -#define SYS_EIC(x) __REG2(0xa0900214, (x)) - -/* External Interrupt x Control register: Status */ -#define SYS_EIC_STS __REGBIT(3) - -/* External Interrupt x Control register: Clear */ -#define SYS_EIC_CLR __REGBIT(2) - -/* External Interrupt x Control register: Polarity */ -#define SYS_EIC_PLTY __REGBIT(1) -#define SYS_EIC_PLTY_AH __REGVAL(SYS_EIC_PLTY, 0) -#define SYS_EIC_PLTY_AL __REGVAL(SYS_EIC_PLTY, 1) - -/* External Interrupt x Control register: Level edge */ -#define SYS_EIC_LVEDG __REGBIT(0) -#define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0) -#define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1) - -#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/system.h b/arch/arm/mach-ns9xxx/include/mach/system.h deleted file mode 100644 index 1561588ca364..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/system.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/system.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <asm/proc-fns.h> -#include <mach/processor.h> -#include <mach/processor-ns9360.h> - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode, const char *cmd) -{ -#ifdef CONFIG_PROCESSOR_NS9360 - if (processor_is_ns9360()) - ns9360_reset(mode); - else -#endif - BUG(); - - BUG(); -} - -#endif /* ifndef __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/timex.h b/arch/arm/mach-ns9xxx/include/mach/timex.h deleted file mode 100644 index 734a8d8bd578..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/timex.h - * - * Copyright (C) 2005-2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* - * value for CLOCK_TICK_RATE stolen from arch/arm/mach-s3c2410/include/mach/timex.h. - * See there for an explanation. - */ -#define CLOCK_TICK_RATE 12000000 - -#endif /* ifndef __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h deleted file mode 100644 index 770a68c46e81..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/uncompress.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/uncompress.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <linux/io.h> - -#define __REG(x) ((void __iomem __force *)(x)) - -static void putc_dummy(char c, void __iomem *base) -{ - /* nothing */ -} - -static int timeout; - -static void putc_ns9360(char c, void __iomem *base) -{ - do { - if (timeout) - --timeout; - - if (__raw_readl(base + 8) & (1 << 3)) { - __raw_writeb(c, base + 16); - timeout = 0x10000; - break; - } - } while (timeout); -} - -static void putc_a9m9750dev(char c, void __iomem *base) -{ - do { - if (timeout) - --timeout; - - if (__raw_readb(base + 5) & (1 << 5)) { - __raw_writeb(c, base); - timeout = 0x10000; - break; - } - } while (timeout); - -} - -static void putc_ns921x(char c, void __iomem *base) -{ - do { - if (timeout) - --timeout; - - if (!(__raw_readl(base) & (1 << 11))) { - __raw_writeb(c, base + 0x0028); - timeout = 0x10000; - break; - } - } while (timeout); -} - -#define MSCS __REG(0xA0900184) - -#define NS9360_UARTA __REG(0x90200040) -#define NS9360_UARTB __REG(0x90200000) -#define NS9360_UARTC __REG(0x90300000) -#define NS9360_UARTD __REG(0x90300040) - -#define NS9360_UART_ENABLED(base) \ - (__raw_readl(NS9360_UARTA) & (1 << 31)) - -#define A9M9750DEV_UARTA __REG(0x40000000) - -#define NS921XSYS_CLOCK __REG(0xa090017c) -#define NS921X_UARTA __REG(0x90010000) -#define NS921X_UARTB __REG(0x90018000) -#define NS921X_UARTC __REG(0x90020000) -#define NS921X_UARTD __REG(0x90028000) - -#define NS921X_UART_ENABLED(base) \ - (__raw_readl((base) + 0x1000) & (1 << 29)) - -static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base) -{ - timeout = 0x10000; - if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) { - /* ns9360 or ns9750 */ - if (NS9360_UART_ENABLED(NS9360_UARTA)) { - *putc = putc_ns9360; - *base = NS9360_UARTA; - return; - } else if (NS9360_UART_ENABLED(NS9360_UARTB)) { - *putc = putc_ns9360; - *base = NS9360_UARTB; - return; - } else if (NS9360_UART_ENABLED(NS9360_UARTC)) { - *putc = putc_ns9360; - *base = NS9360_UARTC; - return; - } else if (NS9360_UART_ENABLED(NS9360_UARTD)) { - *putc = putc_ns9360; - *base = NS9360_UARTD; - return; - } else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) { - *putc = putc_a9m9750dev; - *base = A9M9750DEV_UARTA; - return; - } - } else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) { - /* ns921x */ - u32 clock = __raw_readl(NS921XSYS_CLOCK); - - if ((clock & (1 << 1)) && - NS921X_UART_ENABLED(NS921X_UARTA)) { - *putc = putc_ns921x; - *base = NS921X_UARTA; - return; - } else if ((clock & (1 << 2)) && - NS921X_UART_ENABLED(NS921X_UARTB)) { - *putc = putc_ns921x; - *base = NS921X_UARTB; - return; - } else if ((clock & (1 << 3)) && - NS921X_UART_ENABLED(NS921X_UARTC)) { - *putc = putc_ns921x; - *base = NS921X_UARTC; - return; - } else if ((clock & (1 << 4)) && - NS921X_UART_ENABLED(NS921X_UARTD)) { - *putc = putc_ns921x; - *base = NS921X_UARTD; - return; - } - } - - *putc = putc_dummy; -} - -void (*myputc)(char, void __iomem *); -void __iomem *base; - -static void putc(char c) -{ - myputc(c, base); -} - -static void arch_decomp_setup(void) -{ - autodetect(&myputc, &base); -} -#define arch_decomp_wdog() - -static void flush(void) -{ - /* nothing */ -} - -#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-ns9xxx/include/mach/vmalloc.h b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h deleted file mode 100644 index c8651974c4b0..000000000000 --- a/arch/arm/mach-ns9xxx/include/mach/vmalloc.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/include/mach/vmalloc.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (0xf0000000UL) - -#endif /* ifndef __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c deleted file mode 100644 index 37ab0a2b83ad..000000000000 --- a/arch/arm/mach-ns9xxx/irq.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/irq.c - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/io.h> -#include <asm/mach/irq.h> -#include <mach/regs-sys-common.h> -#include <mach/irqs.h> -#include <mach/board.h> - -#include "generic.h" - -/* simple interrupt prio table: prio(x) < prio(y) <=> x < y */ -#define irq2prio(i) (i) -#define prio2irq(p) (p) - -static void ns9xxx_mask_irq(struct irq_data *d) -{ - /* XXX: better use cpp symbols */ - int prio = irq2prio(d->irq); - u32 ic = __raw_readl(SYS_IC(prio / 4)); - ic &= ~(1 << (7 + 8 * (3 - (prio & 3)))); - __raw_writel(ic, SYS_IC(prio / 4)); -} - -static void ns9xxx_eoi_irq(struct irq_data *d) -{ - __raw_writel(0, SYS_ISRADDR); -} - -static void ns9xxx_unmask_irq(struct irq_data *d) -{ - /* XXX: better use cpp symbols */ - int prio = irq2prio(d->irq); - u32 ic = __raw_readl(SYS_IC(prio / 4)); - ic |= 1 << (7 + 8 * (3 - (prio & 3))); - __raw_writel(ic, SYS_IC(prio / 4)); -} - -static struct irq_chip ns9xxx_chip = { - .irq_eoi = ns9xxx_eoi_irq, - .irq_mask = ns9xxx_mask_irq, - .irq_unmask = ns9xxx_unmask_irq, -}; - -void __init ns9xxx_init_irq(void) -{ - int i; - - /* disable all IRQs */ - for (i = 0; i < 8; ++i) - __raw_writel(prio2irq(4 * i) << 24 | - prio2irq(4 * i + 1) << 16 | - prio2irq(4 * i + 2) << 8 | - prio2irq(4 * i + 3), - SYS_IC(i)); - - for (i = 0; i < 32; ++i) - __raw_writel(prio2irq(i), SYS_IVA(i)); - - for (i = 0; i <= 31; ++i) { - irq_set_chip_and_handler(i, &ns9xxx_chip, handle_fasteoi_irq); - set_irq_flags(i, IRQF_VALID); - irq_set_status_flags(i, IRQ_LEVEL); - } -} diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c deleted file mode 100644 index 2858417d8d8a..000000000000 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/mach-cc9p9360dev.c - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <mach/processor-ns9360.h> - -#include "board-a9m9750dev.h" -#include "generic.h" - -static void __init mach_cc9p9360dev_map_io(void) -{ - ns9360_map_io(); - board_a9m9750dev_map_io(); -} - -static void __init mach_cc9p9360dev_init_irq(void) -{ - ns9xxx_init_irq(); - board_a9m9750dev_init_irq(); -} - -static void __init mach_cc9p9360dev_init_machine(void) -{ - ns9xxx_init_machine(); - board_a9m9750dev_init_machine(); -} - -MACHINE_START(CC9P9360DEV, "Digi ConnectCore 9P 9360 on an A9M9750 Devboard") - .map_io = mach_cc9p9360dev_map_io, - .init_irq = mach_cc9p9360dev_init_irq, - .init_machine = mach_cc9p9360dev_init_machine, - .timer = &ns9360_timer, - .boot_params = 0x100, -MACHINE_END diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c deleted file mode 100644 index 729f68da4293..000000000000 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/mach-cc9p9360js.c - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <mach/processor-ns9360.h> - -#include "board-jscc9p9360.h" -#include "generic.h" - -static void __init mach_cc9p9360js_init_machine(void) -{ - ns9xxx_init_machine(); - board_jscc9p9360_init_machine(); -} - -MACHINE_START(CC9P9360JS, "Digi ConnectCore 9P 9360 on an JSCC9P9360 Devboard") - .map_io = ns9360_map_io, - .init_irq = ns9xxx_init_irq, - .init_machine = mach_cc9p9360js_init_machine, - .timer = &ns9360_timer, - .boot_params = 0x100, -MACHINE_END diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c deleted file mode 100644 index 463e92465fda..000000000000 --- a/arch/arm/mach-ns9xxx/plat-serial8250.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/plat-serial8250.c - * - * Copyright (C) 2008 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/slab.h> - -#include <mach/regs-board-a9m9750dev.h> -#include <mach/board.h> - -#define DRIVER_NAME "serial8250" - -static int __init ns9xxx_plat_serial8250_init(void) -{ - struct plat_serial8250_port *pdata; - struct platform_device *pdev; - int ret = -ENOMEM; - int i; - - if (!board_is_a9m9750dev()) - return -ENODEV; - - pdev = platform_device_alloc(DRIVER_NAME, 0); - if (!pdev) - goto err; - - pdata = kzalloc(5 * sizeof(*pdata), GFP_KERNEL); - if (!pdata) - goto err; - - pdev->dev.platform_data = pdata; - - pdata[0].iobase = FPGA_UARTA_BASE; - pdata[1].iobase = FPGA_UARTB_BASE; - pdata[2].iobase = FPGA_UARTC_BASE; - pdata[3].iobase = FPGA_UARTD_BASE; - - for (i = 0; i < 4; ++i) { - pdata[i].membase = (void __iomem *)pdata[i].iobase; - pdata[i].mapbase = pdata[i].iobase; - pdata[i].iotype = UPIO_MEM; - pdata[i].uartclk = 18432000; - pdata[i].flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; - } - - pdata[0].irq = IRQ_FPGA_UARTA; - pdata[1].irq = IRQ_FPGA_UARTB; - pdata[2].irq = IRQ_FPGA_UARTC; - pdata[3].irq = IRQ_FPGA_UARTD; - - ret = platform_device_add(pdev); - if (ret) { -err: - platform_device_put(pdev); - - printk(KERN_WARNING "Could not add %s (errno=%d)\n", - DRIVER_NAME, ret); - } - - return 0; -} - -arch_initcall(ns9xxx_plat_serial8250_init); diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c deleted file mode 100644 index aed1999d24fc..000000000000 --- a/arch/arm/mach-ns9xxx/processor-ns9360.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/processor-ns9360.c - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <linux/io.h> -#include <linux/kernel.h> - -#include <asm/page.h> -#include <asm/mach/map.h> -#include <mach/processor-ns9360.h> -#include <mach/regs-sys-ns9360.h> - -void ns9360_reset(char mode) -{ - u32 reg; - - reg = __raw_readl(SYS_PLL) >> 16; - REGSET(reg, SYS_PLL, SWC, YES); - __raw_writel(reg, SYS_PLL); -} - -#define CRYSTAL 29491200 /* Hz */ -unsigned long ns9360_systemclock(void) -{ - u32 pll = __raw_readl(SYS_PLL); - return CRYSTAL * (REGGETIM(pll, SYS_PLL, ND) + 1) - >> REGGETIM(pll, SYS_PLL, FS); -} - -static struct map_desc ns9360_io_desc[] __initdata = { - { /* BBus */ - .virtual = io_p2v(0x90000000), - .pfn = __phys_to_pfn(0x90000000), - .length = 0x00700000, - .type = MT_DEVICE, - }, { /* AHB */ - .virtual = io_p2v(0xa0100000), - .pfn = __phys_to_pfn(0xa0100000), - .length = 0x00900000, - .type = MT_DEVICE, - }, -}; - -void __init ns9360_map_io(void) -{ - iotable_init(ns9360_io_desc, ARRAY_SIZE(ns9360_io_desc)); -} diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c deleted file mode 100644 index 9ca32f55728b..000000000000 --- a/arch/arm/mach-ns9xxx/time-ns9360.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/time-ns9360.c - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include <linux/jiffies.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/stringify.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> - -#include <mach/processor-ns9360.h> -#include <mach/regs-sys-ns9360.h> -#include <mach/irqs.h> -#include <mach/system.h> -#include "generic.h" - -#define TIMER_CLOCKSOURCE 0 -#define TIMER_CLOCKEVENT 1 -static u32 latch; - -static cycle_t ns9360_clocksource_read(struct clocksource *cs) -{ - return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE)); -} - -static struct clocksource ns9360_clocksource = { - .name = "ns9360-timer" __stringify(TIMER_CLOCKSOURCE), - .rating = 300, - .read = ns9360_clocksource_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static void ns9360_clockevent_setmode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - __raw_writel(latch, SYS_TRC(TIMER_CLOCKEVENT)); - REGSET(tc, SYS_TCx, REN, EN); - REGSET(tc, SYS_TCx, INTS, EN); - REGSET(tc, SYS_TCx, TEN, EN); - break; - - case CLOCK_EVT_MODE_ONESHOT: - REGSET(tc, SYS_TCx, REN, DIS); - REGSET(tc, SYS_TCx, INTS, EN); - - /* fall through */ - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - default: - REGSET(tc, SYS_TCx, TEN, DIS); - break; - } - - __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); -} - -static int ns9360_clockevent_setnextevent(unsigned long evt, - struct clock_event_device *clk) -{ - u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); - - if (REGGET(tc, SYS_TCx, TEN)) { - REGSET(tc, SYS_TCx, TEN, DIS); - __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); - } - - REGSET(tc, SYS_TCx, TEN, EN); - - __raw_writel(evt, SYS_TRC(TIMER_CLOCKEVENT)); - - __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); - - return 0; -} - -static struct clock_event_device ns9360_clockevent_device = { - .name = "ns9360-timer" __stringify(TIMER_CLOCKEVENT), - .shift = 20, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = ns9360_clockevent_setmode, - .set_next_event = ns9360_clockevent_setnextevent, -}; - -static irqreturn_t ns9360_clockevent_handler(int irq, void *dev_id) -{ - int timerno = irq - IRQ_NS9360_TIMER0; - u32 tc; - - struct clock_event_device *evt = &ns9360_clockevent_device; - - /* clear irq */ - tc = __raw_readl(SYS_TC(timerno)); - if (REGGET(tc, SYS_TCx, REN) == SYS_TCx_REN_DIS) { - REGSET(tc, SYS_TCx, TEN, DIS); - __raw_writel(tc, SYS_TC(timerno)); - } - REGSET(tc, SYS_TCx, INTC, SET); - __raw_writel(tc, SYS_TC(timerno)); - REGSET(tc, SYS_TCx, INTC, UNSET); - __raw_writel(tc, SYS_TC(timerno)); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction ns9360_clockevent_action = { - .name = "ns9360-timer" __stringify(TIMER_CLOCKEVENT), - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = ns9360_clockevent_handler, -}; - -static void __init ns9360_timer_init(void) -{ - int tc; - - tc = __raw_readl(SYS_TC(TIMER_CLOCKSOURCE)); - if (REGGET(tc, SYS_TCx, TEN)) { - REGSET(tc, SYS_TCx, TEN, DIS); - __raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE)); - } - - __raw_writel(0, SYS_TRC(TIMER_CLOCKSOURCE)); - - REGSET(tc, SYS_TCx, TEN, EN); - REGSET(tc, SYS_TCx, TDBG, STOP); - REGSET(tc, SYS_TCx, TLCS, CPU); - REGSET(tc, SYS_TCx, TM, IEE); - REGSET(tc, SYS_TCx, INTS, DIS); - REGSET(tc, SYS_TCx, UDS, UP); - REGSET(tc, SYS_TCx, TSZ, 32); - REGSET(tc, SYS_TCx, REN, EN); - - __raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE)); - - clocksource_register_hz(&ns9360_clocksource, ns9360_cpuclock()); - - latch = SH_DIV(ns9360_cpuclock(), HZ, 0); - - tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); - REGSET(tc, SYS_TCx, TEN, DIS); - REGSET(tc, SYS_TCx, TDBG, STOP); - REGSET(tc, SYS_TCx, TLCS, CPU); - REGSET(tc, SYS_TCx, TM, IEE); - REGSET(tc, SYS_TCx, INTS, DIS); - REGSET(tc, SYS_TCx, UDS, DOWN); - REGSET(tc, SYS_TCx, TSZ, 32); - REGSET(tc, SYS_TCx, REN, EN); - __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); - - ns9360_clockevent_device.mult = div_sc(ns9360_cpuclock(), - NSEC_PER_SEC, ns9360_clockevent_device.shift); - ns9360_clockevent_device.max_delta_ns = - clockevent_delta2ns(-1, &ns9360_clockevent_device); - ns9360_clockevent_device.min_delta_ns = - clockevent_delta2ns(1, &ns9360_clockevent_device); - - ns9360_clockevent_device.cpumask = cpumask_of(0); - clockevents_register_device(&ns9360_clockevent_device); - - setup_irq(IRQ_NS9360_TIMER0 + TIMER_CLOCKEVENT, - &ns9360_clockevent_action); -} - -struct sys_timer ns9360_timer = { - .init = ns9360_timer_init, -}; diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig index 20d1317cc486..2cee6b0de371 100644 --- a/arch/arm/mach-spear3xx/Kconfig +++ b/arch/arm/mach-spear3xx/Kconfig @@ -4,9 +4,26 @@ if ARCH_SPEAR3XX -choice - prompt "SPEAr3XX Family" - default MACH_SPEAR300 +menu "SPEAr3xx Implementations" +config BOARD_SPEAR300_EVB + bool "SPEAr300 Evaluation Board" + select MACH_SPEAR300 + help + Supports ST SPEAr300 Evaluation Board + +config BOARD_SPEAR310_EVB + bool "SPEAr310 Evaluation Board" + select MACH_SPEAR310 + help + Supports ST SPEAr310 Evaluation Board + +config BOARD_SPEAR320_EVB + bool "SPEAr320 Evaluation Board" + select MACH_SPEAR320 + help + Supports ST SPEAr320 Evaluation Board + +endmenu config MACH_SPEAR300 bool "SPEAr300" @@ -23,11 +40,4 @@ config MACH_SPEAR320 help Supports ST SPEAr320 Machine -endchoice - -# Adding SPEAr3XX machine specific configuration files -source "arch/arm/mach-spear3xx/Kconfig300" -source "arch/arm/mach-spear3xx/Kconfig310" -source "arch/arm/mach-spear3xx/Kconfig320" - endif #ARCH_SPEAR3XX diff --git a/arch/arm/mach-spear3xx/Kconfig300 b/arch/arm/mach-spear3xx/Kconfig300 deleted file mode 100644 index c519a05b4ab4..000000000000 --- a/arch/arm/mach-spear3xx/Kconfig300 +++ /dev/null @@ -1,17 +0,0 @@ -# -# SPEAr300 machine configuration file -# - -if MACH_SPEAR300 - -choice - prompt "SPEAr300 Boards" - default BOARD_SPEAR300_EVB - -config BOARD_SPEAR300_EVB - bool "SPEAr300 Evaluation Board" - help - Supports ST SPEAr300 Evaluation Board -endchoice - -endif #MACH_SPEAR300 diff --git a/arch/arm/mach-spear3xx/Kconfig310 b/arch/arm/mach-spear3xx/Kconfig310 deleted file mode 100644 index 60e7442d75bd..000000000000 --- a/arch/arm/mach-spear3xx/Kconfig310 +++ /dev/null @@ -1,17 +0,0 @@ -# -# SPEAr310 machine configuration file -# - -if MACH_SPEAR310 - -choice - prompt "SPEAr310 Boards" - default BOARD_SPEAR310_EVB - -config BOARD_SPEAR310_EVB - bool "SPEAr310 Evaluation Board" - help - Supports ST SPEAr310 Evaluation Board -endchoice - -endif #MACH_SPEAR310 diff --git a/arch/arm/mach-spear3xx/Kconfig320 b/arch/arm/mach-spear3xx/Kconfig320 deleted file mode 100644 index 1c1d438399b8..000000000000 --- a/arch/arm/mach-spear3xx/Kconfig320 +++ /dev/null @@ -1,17 +0,0 @@ -# -# SPEAr320 machine configuration file -# - -if MACH_SPEAR320 - -choice - prompt "SPEAr320 Boards" - default BOARD_SPEAR320_EVB - -config BOARD_SPEAR320_EVB - bool "SPEAr320 Evaluation Board" - help - Supports ST SPEAr320 Evaluation Board -endchoice - -endif #MACH_SPEAR320 diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c index 98bc7edc95a6..f67860cd649f 100644 --- a/arch/arm/mach-spear3xx/clock.c +++ b/arch/arm/mach-spear3xx/clock.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <asm/mach-types.h> #include <plat/clock.h> #include <mach/misc_regs.h> @@ -688,56 +689,71 @@ static struct clk_lookup spear_clk_lookups[] = { { .dev_id = "adc", .clk = &adc_clk}, { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, { .dev_id = "gpio", .clk = &gpio_clk}, -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) - { .dev_id = "physmap-flash", .clk = &emi_clk}, -#endif -#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \ - defined(CONFIG_MACH_SPEAR320) - { .con_id = "fsmc", .clk = &fsmc_clk}, -#endif - -/* common clocks to spear310 and spear320 */ -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) - { .dev_id = "uart1", .clk = &uart1_clk}, - { .dev_id = "uart2", .clk = &uart2_clk}, -#endif - - /* common clock to spear300 and spear320 */ -#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320) - { .dev_id = "clcd", .clk = &clcd_clk}, - { .dev_id = "sdhci", .clk = &sdhci_clk}, -#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */ +}; - /* spear300 machine specific clock structures */ +/* array of all spear 300 clock lookups */ #ifdef CONFIG_MACH_SPEAR300 +static struct clk_lookup spear300_clk_lookups[] = { + { .dev_id = "clcd", .clk = &clcd_clk}, + { .con_id = "fsmc", .clk = &fsmc_clk}, { .dev_id = "gpio1", .clk = &gpio1_clk}, { .dev_id = "keyboard", .clk = &kbd_clk}, + { .dev_id = "sdhci", .clk = &sdhci_clk}, +}; #endif - /* spear310 machine specific clock structures */ +/* array of all spear 310 clock lookups */ #ifdef CONFIG_MACH_SPEAR310 +static struct clk_lookup spear310_clk_lookups[] = { + { .con_id = "fsmc", .clk = &fsmc_clk}, + { .con_id = "emi", .clk = &emi_clk}, + { .dev_id = "uart1", .clk = &uart1_clk}, + { .dev_id = "uart2", .clk = &uart2_clk}, { .dev_id = "uart3", .clk = &uart3_clk}, { .dev_id = "uart4", .clk = &uart4_clk}, { .dev_id = "uart5", .clk = &uart5_clk}, - +}; #endif - /* spear320 machine specific clock structures */ + +/* array of all spear 320 clock lookups */ #ifdef CONFIG_MACH_SPEAR320 +static struct clk_lookup spear320_clk_lookups[] = { + { .dev_id = "clcd", .clk = &clcd_clk}, + { .con_id = "fsmc", .clk = &fsmc_clk}, + { .dev_id = "i2c_designware.1", .clk = &i2c1_clk}, + { .con_id = "emi", .clk = &emi_clk}, + { .dev_id = "pwm", .clk = &pwm_clk}, + { .dev_id = "sdhci", .clk = &sdhci_clk}, { .dev_id = "c_can_platform.0", .clk = &can0_clk}, { .dev_id = "c_can_platform.1", .clk = &can1_clk}, - { .dev_id = "i2c_designware.1", .clk = &i2c1_clk}, { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, - { .dev_id = "pwm", .clk = &pwm_clk}, -#endif + { .dev_id = "uart1", .clk = &uart1_clk}, + { .dev_id = "uart2", .clk = &uart2_clk}, }; +#endif -void __init clk_init(void) +void __init spear3xx_clk_init(void) { - int i; + int i, cnt; + struct clk_lookup *lookups; + + if (machine_is_spear300()) { + cnt = ARRAY_SIZE(spear300_clk_lookups); + lookups = spear300_clk_lookups; + } else if (machine_is_spear310()) { + cnt = ARRAY_SIZE(spear310_clk_lookups); + lookups = spear310_clk_lookups; + } else { + cnt = ARRAY_SIZE(spear320_clk_lookups); + lookups = spear320_clk_lookups; + } for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) clk_register(&spear_clk_lookups[i]); - recalc_root_clocks(); + for (i = 0; i < cnt; i++) + clk_register(&lookups[i]); + + clk_init(); } diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index 8e30636909ef..b8f31c3935f7 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -27,16 +27,16 @@ * Following GPT channels will be used as clock source and clockevent */ #define SPEAR_GPT0_BASE SPEAR3XX_ML1_TMR_BASE -#define SPEAR_GPT0_CHAN0_IRQ IRQ_CPU_GPT1_1 -#define SPEAR_GPT0_CHAN1_IRQ IRQ_CPU_GPT1_2 +#define SPEAR_GPT0_CHAN0_IRQ SPEAR3XX_IRQ_CPU_GPT1_1 +#define SPEAR_GPT0_CHAN1_IRQ SPEAR3XX_IRQ_CPU_GPT1_2 /* Add spear3xx family device structure declarations here */ -extern struct amba_device gpio_device; -extern struct amba_device uart_device; +extern struct amba_device spear3xx_gpio_device; +extern struct amba_device spear3xx_uart_device; extern struct sys_timer spear3xx_timer; /* Add spear3xx family function declarations here */ -void __init clk_init(void); +void __init spear3xx_clk_init(void); void __init spear_setup_timer(void); void __init spear3xx_map_io(void); void __init spear3xx_init_irq(void); @@ -60,81 +60,80 @@ void __init spear3xx_init(void); #define PMX_TIMER_1_2_MASK (1 << 0) /* pad mux devices */ -extern struct pmx_dev pmx_firda; -extern struct pmx_dev pmx_i2c; -extern struct pmx_dev pmx_ssp_cs; -extern struct pmx_dev pmx_ssp; -extern struct pmx_dev pmx_mii; -extern struct pmx_dev pmx_gpio_pin0; -extern struct pmx_dev pmx_gpio_pin1; -extern struct pmx_dev pmx_gpio_pin2; -extern struct pmx_dev pmx_gpio_pin3; -extern struct pmx_dev pmx_gpio_pin4; -extern struct pmx_dev pmx_gpio_pin5; -extern struct pmx_dev pmx_uart0_modem; -extern struct pmx_dev pmx_uart0; -extern struct pmx_dev pmx_timer_3_4; -extern struct pmx_dev pmx_timer_1_2; +extern struct pmx_dev spear3xx_pmx_firda; +extern struct pmx_dev spear3xx_pmx_i2c; +extern struct pmx_dev spear3xx_pmx_ssp_cs; +extern struct pmx_dev spear3xx_pmx_ssp; +extern struct pmx_dev spear3xx_pmx_mii; +extern struct pmx_dev spear3xx_pmx_gpio_pin0; +extern struct pmx_dev spear3xx_pmx_gpio_pin1; +extern struct pmx_dev spear3xx_pmx_gpio_pin2; +extern struct pmx_dev spear3xx_pmx_gpio_pin3; +extern struct pmx_dev spear3xx_pmx_gpio_pin4; +extern struct pmx_dev spear3xx_pmx_gpio_pin5; +extern struct pmx_dev spear3xx_pmx_uart0_modem; +extern struct pmx_dev spear3xx_pmx_uart0; +extern struct pmx_dev spear3xx_pmx_timer_3_4; +extern struct pmx_dev spear3xx_pmx_timer_1_2; #if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) /* padmux plgpio devices */ -extern struct pmx_dev pmx_plgpio_0_1; -extern struct pmx_dev pmx_plgpio_2_3; -extern struct pmx_dev pmx_plgpio_4_5; -extern struct pmx_dev pmx_plgpio_6_9; -extern struct pmx_dev pmx_plgpio_10_27; -extern struct pmx_dev pmx_plgpio_28; -extern struct pmx_dev pmx_plgpio_29; -extern struct pmx_dev pmx_plgpio_30; -extern struct pmx_dev pmx_plgpio_31; -extern struct pmx_dev pmx_plgpio_32; -extern struct pmx_dev pmx_plgpio_33; -extern struct pmx_dev pmx_plgpio_34_36; -extern struct pmx_dev pmx_plgpio_37_42; -extern struct pmx_dev pmx_plgpio_43_44_47_48; -extern struct pmx_dev pmx_plgpio_45_46_49_50; +extern struct pmx_dev spear3xx_pmx_plgpio_0_1; +extern struct pmx_dev spear3xx_pmx_plgpio_2_3; +extern struct pmx_dev spear3xx_pmx_plgpio_4_5; +extern struct pmx_dev spear3xx_pmx_plgpio_6_9; +extern struct pmx_dev spear3xx_pmx_plgpio_10_27; +extern struct pmx_dev spear3xx_pmx_plgpio_28; +extern struct pmx_dev spear3xx_pmx_plgpio_29; +extern struct pmx_dev spear3xx_pmx_plgpio_30; +extern struct pmx_dev spear3xx_pmx_plgpio_31; +extern struct pmx_dev spear3xx_pmx_plgpio_32; +extern struct pmx_dev spear3xx_pmx_plgpio_33; +extern struct pmx_dev spear3xx_pmx_plgpio_34_36; +extern struct pmx_dev spear3xx_pmx_plgpio_37_42; +extern struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48; +extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50; #endif -extern struct pmx_driver pmx_driver; - /* spear300 declarations */ #ifdef CONFIG_MACH_SPEAR300 /* Add spear300 machine device structure declarations here */ -extern struct amba_device gpio1_device; +extern struct amba_device spear300_gpio1_device; /* pad mux modes */ -extern struct pmx_mode nand_mode; -extern struct pmx_mode nor_mode; -extern struct pmx_mode photo_frame_mode; -extern struct pmx_mode lend_ip_phone_mode; -extern struct pmx_mode hend_ip_phone_mode; -extern struct pmx_mode lend_wifi_phone_mode; -extern struct pmx_mode hend_wifi_phone_mode; -extern struct pmx_mode ata_pabx_wi2s_mode; -extern struct pmx_mode ata_pabx_i2s_mode; -extern struct pmx_mode caml_lcdw_mode; -extern struct pmx_mode camu_lcd_mode; -extern struct pmx_mode camu_wlcd_mode; -extern struct pmx_mode caml_lcd_mode; +extern struct pmx_mode spear300_nand_mode; +extern struct pmx_mode spear300_nor_mode; +extern struct pmx_mode spear300_photo_frame_mode; +extern struct pmx_mode spear300_lend_ip_phone_mode; +extern struct pmx_mode spear300_hend_ip_phone_mode; +extern struct pmx_mode spear300_lend_wifi_phone_mode; +extern struct pmx_mode spear300_hend_wifi_phone_mode; +extern struct pmx_mode spear300_ata_pabx_wi2s_mode; +extern struct pmx_mode spear300_ata_pabx_i2s_mode; +extern struct pmx_mode spear300_caml_lcdw_mode; +extern struct pmx_mode spear300_camu_lcd_mode; +extern struct pmx_mode spear300_camu_wlcd_mode; +extern struct pmx_mode spear300_caml_lcd_mode; /* pad mux devices */ -extern struct pmx_dev pmx_fsmc_2_chips; -extern struct pmx_dev pmx_fsmc_4_chips; -extern struct pmx_dev pmx_keyboard; -extern struct pmx_dev pmx_clcd; -extern struct pmx_dev pmx_telecom_gpio; -extern struct pmx_dev pmx_telecom_tdm; -extern struct pmx_dev pmx_telecom_spi_cs_i2c_clk; -extern struct pmx_dev pmx_telecom_camera; -extern struct pmx_dev pmx_telecom_dac; -extern struct pmx_dev pmx_telecom_i2s; -extern struct pmx_dev pmx_telecom_boot_pins; -extern struct pmx_dev pmx_telecom_sdhci_4bit; -extern struct pmx_dev pmx_telecom_sdhci_8bit; -extern struct pmx_dev pmx_gpio1; +extern struct pmx_dev spear300_pmx_fsmc_2_chips; +extern struct pmx_dev spear300_pmx_fsmc_4_chips; +extern struct pmx_dev spear300_pmx_keyboard; +extern struct pmx_dev spear300_pmx_clcd; +extern struct pmx_dev spear300_pmx_telecom_gpio; +extern struct pmx_dev spear300_pmx_telecom_tdm; +extern struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk; +extern struct pmx_dev spear300_pmx_telecom_camera; +extern struct pmx_dev spear300_pmx_telecom_dac; +extern struct pmx_dev spear300_pmx_telecom_i2s; +extern struct pmx_dev spear300_pmx_telecom_boot_pins; +extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit; +extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit; +extern struct pmx_dev spear300_pmx_gpio1; /* Add spear300 machine function declarations here */ -void __init spear300_init(void); +void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, + u8 pmx_dev_count); #endif /* CONFIG_MACH_SPEAR300 */ @@ -143,17 +142,18 @@ void __init spear300_init(void); /* Add spear310 machine device structure declarations here */ /* pad mux devices */ -extern struct pmx_dev pmx_emi_cs_0_1_4_5; -extern struct pmx_dev pmx_emi_cs_2_3; -extern struct pmx_dev pmx_uart1; -extern struct pmx_dev pmx_uart2; -extern struct pmx_dev pmx_uart3_4_5; -extern struct pmx_dev pmx_fsmc; -extern struct pmx_dev pmx_rs485_0_1; -extern struct pmx_dev pmx_tdm0; +extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5; +extern struct pmx_dev spear310_pmx_emi_cs_2_3; +extern struct pmx_dev spear310_pmx_uart1; +extern struct pmx_dev spear310_pmx_uart2; +extern struct pmx_dev spear310_pmx_uart3_4_5; +extern struct pmx_dev spear310_pmx_fsmc; +extern struct pmx_dev spear310_pmx_rs485_0_1; +extern struct pmx_dev spear310_pmx_tdm0; /* Add spear310 machine function declarations here */ -void __init spear310_init(void); +void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, + u8 pmx_dev_count); #endif /* CONFIG_MACH_SPEAR310 */ @@ -162,37 +162,38 @@ void __init spear310_init(void); /* Add spear320 machine device structure declarations here */ /* pad mux modes */ -extern struct pmx_mode auto_net_smii_mode; -extern struct pmx_mode auto_net_mii_mode; -extern struct pmx_mode auto_exp_mode; -extern struct pmx_mode small_printers_mode; +extern struct pmx_mode spear320_auto_net_smii_mode; +extern struct pmx_mode spear320_auto_net_mii_mode; +extern struct pmx_mode spear320_auto_exp_mode; +extern struct pmx_mode spear320_small_printers_mode; /* pad mux devices */ -extern struct pmx_dev pmx_clcd; -extern struct pmx_dev pmx_emi; -extern struct pmx_dev pmx_fsmc; -extern struct pmx_dev pmx_spp; -extern struct pmx_dev pmx_sdhci; -extern struct pmx_dev pmx_i2s; -extern struct pmx_dev pmx_uart1; -extern struct pmx_dev pmx_uart1_modem; -extern struct pmx_dev pmx_uart2; -extern struct pmx_dev pmx_touchscreen; -extern struct pmx_dev pmx_can; -extern struct pmx_dev pmx_sdhci_led; -extern struct pmx_dev pmx_pwm0; -extern struct pmx_dev pmx_pwm1; -extern struct pmx_dev pmx_pwm2; -extern struct pmx_dev pmx_pwm3; -extern struct pmx_dev pmx_ssp1; -extern struct pmx_dev pmx_ssp2; -extern struct pmx_dev pmx_mii1; -extern struct pmx_dev pmx_smii0; -extern struct pmx_dev pmx_smii1; -extern struct pmx_dev pmx_i2c1; +extern struct pmx_dev spear320_pmx_clcd; +extern struct pmx_dev spear320_pmx_emi; +extern struct pmx_dev spear320_pmx_fsmc; +extern struct pmx_dev spear320_pmx_spp; +extern struct pmx_dev spear320_pmx_sdhci; +extern struct pmx_dev spear320_pmx_i2s; +extern struct pmx_dev spear320_pmx_uart1; +extern struct pmx_dev spear320_pmx_uart1_modem; +extern struct pmx_dev spear320_pmx_uart2; +extern struct pmx_dev spear320_pmx_touchscreen; +extern struct pmx_dev spear320_pmx_can; +extern struct pmx_dev spear320_pmx_sdhci_led; +extern struct pmx_dev spear320_pmx_pwm0; +extern struct pmx_dev spear320_pmx_pwm1; +extern struct pmx_dev spear320_pmx_pwm2; +extern struct pmx_dev spear320_pmx_pwm3; +extern struct pmx_dev spear320_pmx_ssp1; +extern struct pmx_dev spear320_pmx_ssp2; +extern struct pmx_dev spear320_pmx_mii1; +extern struct pmx_dev spear320_pmx_smii0; +extern struct pmx_dev spear320_pmx_smii1; +extern struct pmx_dev spear320_pmx_i2c1; /* Add spear320 machine function declarations here */ -void __init spear320_init(void); +void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, + u8 pmx_dev_count); #endif /* CONFIG_MACH_SPEAR320 */ diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h index a1a7f481866d..6e265442808e 100644 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -15,138 +15,140 @@ #define __MACH_IRQS_H /* SPEAr3xx IRQ definitions */ -#define IRQ_HW_ACCEL_MOD_0 0 -#define IRQ_INTRCOMM_RAS_ARM 1 -#define IRQ_CPU_GPT1_1 2 -#define IRQ_CPU_GPT1_2 3 -#define IRQ_BASIC_GPT1_1 4 -#define IRQ_BASIC_GPT1_2 5 -#define IRQ_BASIC_GPT2_1 6 -#define IRQ_BASIC_GPT2_2 7 -#define IRQ_BASIC_DMA 8 -#define IRQ_BASIC_SMI 9 -#define IRQ_BASIC_RTC 10 -#define IRQ_BASIC_GPIO 11 -#define IRQ_BASIC_WDT 12 -#define IRQ_DDR_CONTROLLER 13 -#define IRQ_SYS_ERROR 14 -#define IRQ_WAKEUP_RCV 15 -#define IRQ_JPEG 16 -#define IRQ_IRDA 17 -#define IRQ_ADC 18 -#define IRQ_UART 19 -#define IRQ_SSP 20 -#define IRQ_I2C 21 -#define IRQ_MAC_1 22 -#define IRQ_MAC_2 23 -#define IRQ_USB_DEV 24 -#define IRQ_USB_H_OHCI_0 25 -#define IRQ_USB_H_EHCI_0 26 -#define IRQ_USB_H_EHCI_1 IRQ_USB_H_EHCI_0 -#define IRQ_USB_H_OHCI_1 27 -#define IRQ_GEN_RAS_1 28 -#define IRQ_GEN_RAS_2 29 -#define IRQ_GEN_RAS_3 30 -#define IRQ_HW_ACCEL_MOD_1 31 -#define IRQ_VIC_END 32 - -#define VIRQ_START IRQ_VIC_END +#define SPEAR3XX_IRQ_HW_ACCEL_MOD_0 0 +#define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM 1 +#define SPEAR3XX_IRQ_CPU_GPT1_1 2 +#define SPEAR3XX_IRQ_CPU_GPT1_2 3 +#define SPEAR3XX_IRQ_BASIC_GPT1_1 4 +#define SPEAR3XX_IRQ_BASIC_GPT1_2 5 +#define SPEAR3XX_IRQ_BASIC_GPT2_1 6 +#define SPEAR3XX_IRQ_BASIC_GPT2_2 7 +#define SPEAR3XX_IRQ_BASIC_DMA 8 +#define SPEAR3XX_IRQ_BASIC_SMI 9 +#define SPEAR3XX_IRQ_BASIC_RTC 10 +#define SPEAR3XX_IRQ_BASIC_GPIO 11 +#define SPEAR3XX_IRQ_BASIC_WDT 12 +#define SPEAR3XX_IRQ_DDR_CONTROLLER 13 +#define SPEAR3XX_IRQ_SYS_ERROR 14 +#define SPEAR3XX_IRQ_WAKEUP_RCV 15 +#define SPEAR3XX_IRQ_JPEG 16 +#define SPEAR3XX_IRQ_IRDA 17 +#define SPEAR3XX_IRQ_ADC 18 +#define SPEAR3XX_IRQ_UART 19 +#define SPEAR3XX_IRQ_SSP 20 +#define SPEAR3XX_IRQ_I2C 21 +#define SPEAR3XX_IRQ_MAC_1 22 +#define SPEAR3XX_IRQ_MAC_2 23 +#define SPEAR3XX_IRQ_USB_DEV 24 +#define SPEAR3XX_IRQ_USB_H_OHCI_0 25 +#define SPEAR3XX_IRQ_USB_H_EHCI_0 26 +#define SPEAR3XX_IRQ_USB_H_EHCI_1 SPEAR3XX_IRQ_USB_H_EHCI_0 +#define SPEAR3XX_IRQ_USB_H_OHCI_1 27 +#define SPEAR3XX_IRQ_GEN_RAS_1 28 +#define SPEAR3XX_IRQ_GEN_RAS_2 29 +#define SPEAR3XX_IRQ_GEN_RAS_3 30 +#define SPEAR3XX_IRQ_HW_ACCEL_MOD_1 31 +#define SPEAR3XX_IRQ_VIC_END 32 + +#define SPEAR3XX_VIRQ_START SPEAR3XX_IRQ_VIC_END /* SPEAr300 Virtual irq definitions */ -#ifdef CONFIG_MACH_SPEAR300 /* IRQs sharing IRQ_GEN_RAS_1 */ -#define VIRQ_IT_PERS_S (VIRQ_START + 0) -#define VIRQ_IT_CHANGE_S (VIRQ_START + 1) -#define VIRQ_I2S (VIRQ_START + 2) -#define VIRQ_TDM (VIRQ_START + 3) -#define VIRQ_CAMERA_L (VIRQ_START + 4) -#define VIRQ_CAMERA_F (VIRQ_START + 5) -#define VIRQ_CAMERA_V (VIRQ_START + 6) -#define VIRQ_KEYBOARD (VIRQ_START + 7) -#define VIRQ_GPIO1 (VIRQ_START + 8) +#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0) +#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1) +#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2) +#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3) +#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4) +#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5) +#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6) +#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7) +#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8) /* IRQs sharing IRQ_GEN_RAS_3 */ -#define IRQ_CLCD IRQ_GEN_RAS_3 +#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3 /* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define IRQ_SDHCI IRQ_INTRCOMM_RAS_ARM - -/* GPIO pins virtual irqs */ -#define SPEAR_GPIO_INT_BASE (VIRQ_START + 9) -#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO_INT_BASE + 8) -#define SPEAR_GPIO_INT_END (SPEAR_GPIO1_INT_BASE + 8) +#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM /* SPEAr310 Virtual irq definitions */ -#elif defined(CONFIG_MACH_SPEAR310) /* IRQs sharing IRQ_GEN_RAS_1 */ -#define VIRQ_SMII0 (VIRQ_START + 0) -#define VIRQ_SMII1 (VIRQ_START + 1) -#define VIRQ_SMII2 (VIRQ_START + 2) -#define VIRQ_SMII3 (VIRQ_START + 3) -#define VIRQ_WAKEUP_SMII0 (VIRQ_START + 4) -#define VIRQ_WAKEUP_SMII1 (VIRQ_START + 5) -#define VIRQ_WAKEUP_SMII2 (VIRQ_START + 6) -#define VIRQ_WAKEUP_SMII3 (VIRQ_START + 7) +#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0) +#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1) +#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2) +#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3) +#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4) +#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5) +#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6) +#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7) /* IRQs sharing IRQ_GEN_RAS_2 */ -#define VIRQ_UART1 (VIRQ_START + 8) -#define VIRQ_UART2 (VIRQ_START + 9) -#define VIRQ_UART3 (VIRQ_START + 10) -#define VIRQ_UART4 (VIRQ_START + 11) -#define VIRQ_UART5 (VIRQ_START + 12) +#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) +#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) +#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10) +#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11) +#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12) /* IRQs sharing IRQ_GEN_RAS_3 */ -#define VIRQ_EMI (VIRQ_START + 13) -#define VIRQ_PLGPIO (VIRQ_START + 14) +#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13) +#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14) /* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define VIRQ_TDM_HDLC (VIRQ_START + 15) -#define VIRQ_RS485_0 (VIRQ_START + 16) -#define VIRQ_RS485_1 (VIRQ_START + 17) - -/* GPIO pins virtual irqs */ -#define SPEAR_GPIO_INT_BASE (VIRQ_START + 18) +#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15) +#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16) +#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17) /* SPEAr320 Virtual irq definitions */ -#else /* IRQs sharing IRQ_GEN_RAS_1 */ -#define VIRQ_EMI (VIRQ_START + 0) -#define VIRQ_CLCD (VIRQ_START + 1) -#define VIRQ_SPP (VIRQ_START + 2) +#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0) +#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1) +#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2) /* IRQs sharing IRQ_GEN_RAS_2 */ -#define IRQ_SDHCI IRQ_GEN_RAS_2 +#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2 /* IRQs sharing IRQ_GEN_RAS_3 */ -#define VIRQ_PLGPIO (VIRQ_START + 3) -#define VIRQ_I2S_PLAY (VIRQ_START + 4) -#define VIRQ_I2S_REC (VIRQ_START + 5) +#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3) +#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4) +#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5) /* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define VIRQ_CANU (VIRQ_START + 6) -#define VIRQ_CANL (VIRQ_START + 7) -#define VIRQ_UART1 (VIRQ_START + 8) -#define VIRQ_UART2 (VIRQ_START + 9) -#define VIRQ_SSP1 (VIRQ_START + 10) -#define VIRQ_SSP2 (VIRQ_START + 11) -#define VIRQ_SMII0 (VIRQ_START + 12) -#define VIRQ_MII1_SMII1 (VIRQ_START + 13) -#define VIRQ_WAKEUP_SMII0 (VIRQ_START + 14) -#define VIRQ_WAKEUP_MII1_SMII1 (VIRQ_START + 15) -#define VIRQ_I2C (VIRQ_START + 16) - -/* GPIO pins virtual irqs */ -#define SPEAR_GPIO_INT_BASE (VIRQ_START + 17) +#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6) +#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7) +#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) +#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) +#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10) +#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11) +#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12) +#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13) +#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14) +#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15) +#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16) +/* + * GPIO pins virtual irqs + * Use the lowest number for the GPIO virtual IRQs base on which subarchs + * we have compiled in + */ +#if defined(CONFIG_MACH_SPEAR310) +#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 18) +#elif defined(CONFIG_MACH_SPEAR320) +#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 17) +#else +#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 9) #endif -/* PLGPIO Virtual IRQs */ +#define SPEAR300_GPIO1_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8) +#define SPEAR3XX_PLGPIO_COUNT 102 + #if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -#define SPEAR_PLGPIO_INT_BASE (SPEAR_GPIO_INT_BASE + 8) -#define SPEAR_GPIO_INT_END (SPEAR_PLGPIO_INT_BASE + 102) +#define SPEAR3XX_PLGPIO_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8) +#define SPEAR3XX_GPIO_INT_END (SPEAR3XX_PLGPIO_INT_BASE + \ + SPEAR3XX_PLGPIO_COUNT) +#else +#define SPEAR3XX_GPIO_INT_END (SPEAR300_GPIO1_INT_BASE + 8) #endif -#define VIRQ_END SPEAR_GPIO_INT_END -#define NR_IRQS VIRQ_END +#define SPEAR3XX_VIRQ_END SPEAR3XX_GPIO_INT_END +#define NR_IRQS SPEAR3XX_VIRQ_END #endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h index c723515f8853..3b6ea0729040 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear300.h +++ b/arch/arm/mach-spear3xx/include/mach/spear300.h @@ -20,19 +20,19 @@ #define SPEAR300_TELECOM_BASE UL(0x50000000) /* Interrupt registers offsets and masks */ -#define INT_ENB_MASK_REG 0x54 -#define INT_STS_MASK_REG 0x58 -#define IT_PERS_S_IRQ_MASK (1 << 0) -#define IT_CHANGE_S_IRQ_MASK (1 << 1) -#define I2S_IRQ_MASK (1 << 2) -#define TDM_IRQ_MASK (1 << 3) -#define CAMERA_L_IRQ_MASK (1 << 4) -#define CAMERA_F_IRQ_MASK (1 << 5) -#define CAMERA_V_IRQ_MASK (1 << 6) -#define KEYBOARD_IRQ_MASK (1 << 7) -#define GPIO1_IRQ_MASK (1 << 8) - -#define SHIRQ_RAS1_MASK 0x1FF +#define SPEAR300_INT_ENB_MASK_REG 0x54 +#define SPEAR300_INT_STS_MASK_REG 0x58 +#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0) +#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1) +#define SPEAR300_I2S_IRQ_MASK (1 << 2) +#define SPEAR300_TDM_IRQ_MASK (1 << 3) +#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4) +#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5) +#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6) +#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7) +#define SPEAR300_GPIO1_IRQ_MASK (1 << 8) + +#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF #define SPEAR300_CLCD_BASE UL(0x60000000) #define SPEAR300_SDHCI_BASE UL(0x70000000) diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h index 1e853479b8cd..1567d0da725f 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear310.h +++ b/arch/arm/mach-spear3xx/include/mach/spear310.h @@ -29,29 +29,29 @@ #define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000) /* Interrupt registers offsets and masks */ -#define INT_STS_MASK_REG 0x04 -#define SMII0_IRQ_MASK (1 << 0) -#define SMII1_IRQ_MASK (1 << 1) -#define SMII2_IRQ_MASK (1 << 2) -#define SMII3_IRQ_MASK (1 << 3) -#define WAKEUP_SMII0_IRQ_MASK (1 << 4) -#define WAKEUP_SMII1_IRQ_MASK (1 << 5) -#define WAKEUP_SMII2_IRQ_MASK (1 << 6) -#define WAKEUP_SMII3_IRQ_MASK (1 << 7) -#define UART1_IRQ_MASK (1 << 8) -#define UART2_IRQ_MASK (1 << 9) -#define UART3_IRQ_MASK (1 << 10) -#define UART4_IRQ_MASK (1 << 11) -#define UART5_IRQ_MASK (1 << 12) -#define EMI_IRQ_MASK (1 << 13) -#define TDM_HDLC_IRQ_MASK (1 << 14) -#define RS485_0_IRQ_MASK (1 << 15) -#define RS485_1_IRQ_MASK (1 << 16) +#define SPEAR310_INT_STS_MASK_REG 0x04 +#define SPEAR310_SMII0_IRQ_MASK (1 << 0) +#define SPEAR310_SMII1_IRQ_MASK (1 << 1) +#define SPEAR310_SMII2_IRQ_MASK (1 << 2) +#define SPEAR310_SMII3_IRQ_MASK (1 << 3) +#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4) +#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5) +#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6) +#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7) +#define SPEAR310_UART1_IRQ_MASK (1 << 8) +#define SPEAR310_UART2_IRQ_MASK (1 << 9) +#define SPEAR310_UART3_IRQ_MASK (1 << 10) +#define SPEAR310_UART4_IRQ_MASK (1 << 11) +#define SPEAR310_UART5_IRQ_MASK (1 << 12) +#define SPEAR310_EMI_IRQ_MASK (1 << 13) +#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14) +#define SPEAR310_RS485_0_IRQ_MASK (1 << 15) +#define SPEAR310_RS485_1_IRQ_MASK (1 << 16) -#define SHIRQ_RAS1_MASK 0x000FF -#define SHIRQ_RAS2_MASK 0x01F00 -#define SHIRQ_RAS3_MASK 0x02000 -#define SHIRQ_INTRCOMM_RAS_MASK 0x1C000 +#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF +#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00 +#define SPEAR310_SHIRQ_RAS3_MASK 0x02000 +#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000 #endif /* __MACH_SPEAR310_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h index 940f0d85d959..8cfa83fa1296 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear320.h +++ b/arch/arm/mach-spear3xx/include/mach/spear320.h @@ -36,31 +36,31 @@ #define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) /* Interrupt registers offsets and masks */ -#define INT_STS_MASK_REG 0x04 -#define INT_CLR_MASK_REG 0x04 -#define INT_ENB_MASK_REG 0x08 -#define GPIO_IRQ_MASK (1 << 0) -#define I2S_PLAY_IRQ_MASK (1 << 1) -#define I2S_REC_IRQ_MASK (1 << 2) -#define EMI_IRQ_MASK (1 << 7) -#define CLCD_IRQ_MASK (1 << 8) -#define SPP_IRQ_MASK (1 << 9) -#define SDHCI_IRQ_MASK (1 << 10) -#define CAN_U_IRQ_MASK (1 << 11) -#define CAN_L_IRQ_MASK (1 << 12) -#define UART1_IRQ_MASK (1 << 13) -#define UART2_IRQ_MASK (1 << 14) -#define SSP1_IRQ_MASK (1 << 15) -#define SSP2_IRQ_MASK (1 << 16) -#define SMII0_IRQ_MASK (1 << 17) -#define MII1_SMII1_IRQ_MASK (1 << 18) -#define WAKEUP_SMII0_IRQ_MASK (1 << 19) -#define WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20) -#define I2C1_IRQ_MASK (1 << 21) +#define SPEAR320_INT_STS_MASK_REG 0x04 +#define SPEAR320_INT_CLR_MASK_REG 0x04 +#define SPEAR320_INT_ENB_MASK_REG 0x08 +#define SPEAR320_GPIO_IRQ_MASK (1 << 0) +#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1) +#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2) +#define SPEAR320_EMI_IRQ_MASK (1 << 7) +#define SPEAR320_CLCD_IRQ_MASK (1 << 8) +#define SPEAR320_SPP_IRQ_MASK (1 << 9) +#define SPEAR320_SDHCI_IRQ_MASK (1 << 10) +#define SPEAR320_CAN_U_IRQ_MASK (1 << 11) +#define SPEAR320_CAN_L_IRQ_MASK (1 << 12) +#define SPEAR320_UART1_IRQ_MASK (1 << 13) +#define SPEAR320_UART2_IRQ_MASK (1 << 14) +#define SPEAR320_SSP1_IRQ_MASK (1 << 15) +#define SPEAR320_SSP2_IRQ_MASK (1 << 16) +#define SPEAR320_SMII0_IRQ_MASK (1 << 17) +#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18) +#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19) +#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20) +#define SPEAR320_I2C1_IRQ_MASK (1 << 21) -#define SHIRQ_RAS1_MASK 0x000380 -#define SHIRQ_RAS3_MASK 0x000007 -#define SHIRQ_INTRCOMM_RAS_MASK 0x3FF800 +#define SPEAR320_SHIRQ_RAS1_MASK 0x000380 +#define SPEAR320_SHIRQ_RAS3_MASK 0x000007 +#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800 #endif /* __MACH_SPEAR320_H */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index 2697e65adf86..a5e46b4ade20 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -40,86 +40,86 @@ #define CAML_LCD_MODE (1 << 12) #define ALL_MODES 0x1FFF -struct pmx_mode nand_mode = { +struct pmx_mode spear300_nand_mode = { .id = NAND_MODE, .name = "nand mode", .mask = 0x00, }; -struct pmx_mode nor_mode = { +struct pmx_mode spear300_nor_mode = { .id = NOR_MODE, .name = "nor mode", .mask = 0x01, }; -struct pmx_mode photo_frame_mode = { +struct pmx_mode spear300_photo_frame_mode = { .id = PHOTO_FRAME_MODE, .name = "photo frame mode", .mask = 0x02, }; -struct pmx_mode lend_ip_phone_mode = { +struct pmx_mode spear300_lend_ip_phone_mode = { .id = LEND_IP_PHONE_MODE, .name = "lend ip phone mode", .mask = 0x03, }; -struct pmx_mode hend_ip_phone_mode = { +struct pmx_mode spear300_hend_ip_phone_mode = { .id = HEND_IP_PHONE_MODE, .name = "hend ip phone mode", .mask = 0x04, }; -struct pmx_mode lend_wifi_phone_mode = { +struct pmx_mode spear300_lend_wifi_phone_mode = { .id = LEND_WIFI_PHONE_MODE, .name = "lend wifi phone mode", .mask = 0x05, }; -struct pmx_mode hend_wifi_phone_mode = { +struct pmx_mode spear300_hend_wifi_phone_mode = { .id = HEND_WIFI_PHONE_MODE, .name = "hend wifi phone mode", .mask = 0x06, }; -struct pmx_mode ata_pabx_wi2s_mode = { +struct pmx_mode spear300_ata_pabx_wi2s_mode = { .id = ATA_PABX_WI2S_MODE, .name = "ata pabx wi2s mode", .mask = 0x07, }; -struct pmx_mode ata_pabx_i2s_mode = { +struct pmx_mode spear300_ata_pabx_i2s_mode = { .id = ATA_PABX_I2S_MODE, .name = "ata pabx i2s mode", .mask = 0x08, }; -struct pmx_mode caml_lcdw_mode = { +struct pmx_mode spear300_caml_lcdw_mode = { .id = CAML_LCDW_MODE, .name = "caml lcdw mode", .mask = 0x0C, }; -struct pmx_mode camu_lcd_mode = { +struct pmx_mode spear300_camu_lcd_mode = { .id = CAMU_LCD_MODE, .name = "camu lcd mode", .mask = 0x0D, }; -struct pmx_mode camu_wlcd_mode = { +struct pmx_mode spear300_camu_wlcd_mode = { .id = CAMU_WLCD_MODE, .name = "camu wlcd mode", .mask = 0x0E, }; -struct pmx_mode caml_lcd_mode = { +struct pmx_mode spear300_caml_lcd_mode = { .id = CAML_LCD_MODE, .name = "caml lcd mode", .mask = 0x0F, }; /* devices */ -struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = { +static struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = { { .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, @@ -127,14 +127,14 @@ struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = { }, }; -struct pmx_dev pmx_fsmc_2_chips = { +struct pmx_dev spear300_pmx_fsmc_2_chips = { .name = "fsmc_2_chips", .modes = pmx_fsmc_2_chips_modes, .mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = { +static struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = { { .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, @@ -142,14 +142,14 @@ struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = { }, }; -struct pmx_dev pmx_fsmc_4_chips = { +struct pmx_dev spear300_pmx_fsmc_4_chips = { .name = "fsmc_4_chips", .modes = pmx_fsmc_4_chips_modes, .mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_keyboard_modes[] = { +static struct pmx_dev_mode pmx_keyboard_modes[] = { { .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | @@ -159,14 +159,14 @@ struct pmx_dev_mode pmx_keyboard_modes[] = { }, }; -struct pmx_dev pmx_keyboard = { +struct pmx_dev spear300_pmx_keyboard = { .name = "keyboard", .modes = pmx_keyboard_modes, .mode_count = ARRAY_SIZE(pmx_keyboard_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_clcd_modes[] = { +static struct pmx_dev_mode pmx_clcd_modes[] = { { .ids = PHOTO_FRAME_MODE, .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK , @@ -177,14 +177,14 @@ struct pmx_dev_mode pmx_clcd_modes[] = { }, }; -struct pmx_dev pmx_clcd = { +struct pmx_dev spear300_pmx_clcd = { .name = "clcd", .modes = pmx_clcd_modes, .mode_count = ARRAY_SIZE(pmx_clcd_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_telecom_gpio_modes[] = { +static struct pmx_dev_mode pmx_telecom_gpio_modes[] = { { .ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE, .mask = PMX_MII_MASK, @@ -204,14 +204,14 @@ struct pmx_dev_mode pmx_telecom_gpio_modes[] = { }, }; -struct pmx_dev pmx_telecom_gpio = { +struct pmx_dev spear300_pmx_telecom_gpio = { .name = "telecom_gpio", .modes = pmx_telecom_gpio_modes, .mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_telecom_tdm_modes[] = { +static struct pmx_dev_mode pmx_telecom_tdm_modes[] = { { .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE @@ -222,14 +222,14 @@ struct pmx_dev_mode pmx_telecom_tdm_modes[] = { }, }; -struct pmx_dev pmx_telecom_tdm = { +struct pmx_dev spear300_pmx_telecom_tdm = { .name = "telecom_tdm", .modes = pmx_telecom_tdm_modes, .mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = { +static struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = { { .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE @@ -239,14 +239,14 @@ struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = { }, }; -struct pmx_dev pmx_telecom_spi_cs_i2c_clk = { +struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk = { .name = "telecom_spi_cs_i2c_clk", .modes = pmx_telecom_spi_cs_i2c_clk_modes, .mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_telecom_camera_modes[] = { +static struct pmx_dev_mode pmx_telecom_camera_modes[] = { { .ids = CAML_LCDW_MODE | CAML_LCD_MODE, .mask = PMX_MII_MASK, @@ -256,14 +256,14 @@ struct pmx_dev_mode pmx_telecom_camera_modes[] = { }, }; -struct pmx_dev pmx_telecom_camera = { +struct pmx_dev spear300_pmx_telecom_camera = { .name = "telecom_camera", .modes = pmx_telecom_camera_modes, .mode_count = ARRAY_SIZE(pmx_telecom_camera_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_telecom_dac_modes[] = { +static struct pmx_dev_mode pmx_telecom_dac_modes[] = { { .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE | CAML_LCD_MODE, @@ -271,14 +271,14 @@ struct pmx_dev_mode pmx_telecom_dac_modes[] = { }, }; -struct pmx_dev pmx_telecom_dac = { +struct pmx_dev spear300_pmx_telecom_dac = { .name = "telecom_dac", .modes = pmx_telecom_dac_modes, .mode_count = ARRAY_SIZE(pmx_telecom_dac_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_telecom_i2s_modes[] = { +static struct pmx_dev_mode pmx_telecom_i2s_modes[] = { { .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | @@ -288,14 +288,14 @@ struct pmx_dev_mode pmx_telecom_i2s_modes[] = { }, }; -struct pmx_dev pmx_telecom_i2s = { +struct pmx_dev spear300_pmx_telecom_i2s = { .name = "telecom_i2s", .modes = pmx_telecom_i2s_modes, .mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = { +static struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = { { .ids = NAND_MODE | NOR_MODE, .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK | @@ -303,14 +303,14 @@ struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = { }, }; -struct pmx_dev pmx_telecom_boot_pins = { +struct pmx_dev spear300_pmx_telecom_boot_pins = { .name = "telecom_boot_pins", .modes = pmx_telecom_boot_pins_modes, .mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = { +static struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = { { .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | @@ -323,14 +323,14 @@ struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = { }, }; -struct pmx_dev pmx_telecom_sdhci_4bit = { +struct pmx_dev spear300_pmx_telecom_sdhci_4bit = { .name = "telecom_sdhci_4bit", .modes = pmx_telecom_sdhci_4bit_modes, .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = { +static struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = { { .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | @@ -342,14 +342,14 @@ struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = { }, }; -struct pmx_dev pmx_telecom_sdhci_8bit = { +struct pmx_dev spear300_pmx_telecom_sdhci_8bit = { .name = "telecom_sdhci_8bit", .modes = pmx_telecom_sdhci_8bit_modes, .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_gpio1_modes[] = { +static struct pmx_dev_mode pmx_gpio1_modes[] = { { .ids = PHOTO_FRAME_MODE, .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK | @@ -357,7 +357,7 @@ struct pmx_dev_mode pmx_gpio1_modes[] = { }, }; -struct pmx_dev pmx_gpio1 = { +struct pmx_dev spear300_pmx_gpio1 = { .name = "arm gpio1", .modes = pmx_gpio1_modes, .mode_count = ARRAY_SIZE(pmx_gpio1_modes), @@ -365,60 +365,60 @@ struct pmx_dev pmx_gpio1 = { }; /* pmx driver structure */ -struct pmx_driver pmx_driver = { +static struct pmx_driver pmx_driver = { .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f}, .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, }; /* spear3xx shared irq */ -struct shirq_dev_config shirq_ras1_config[] = { +static struct shirq_dev_config shirq_ras1_config[] = { { - .virq = VIRQ_IT_PERS_S, - .enb_mask = IT_PERS_S_IRQ_MASK, - .status_mask = IT_PERS_S_IRQ_MASK, + .virq = SPEAR300_VIRQ_IT_PERS_S, + .enb_mask = SPEAR300_IT_PERS_S_IRQ_MASK, + .status_mask = SPEAR300_IT_PERS_S_IRQ_MASK, }, { - .virq = VIRQ_IT_CHANGE_S, - .enb_mask = IT_CHANGE_S_IRQ_MASK, - .status_mask = IT_CHANGE_S_IRQ_MASK, + .virq = SPEAR300_VIRQ_IT_CHANGE_S, + .enb_mask = SPEAR300_IT_CHANGE_S_IRQ_MASK, + .status_mask = SPEAR300_IT_CHANGE_S_IRQ_MASK, }, { - .virq = VIRQ_I2S, - .enb_mask = I2S_IRQ_MASK, - .status_mask = I2S_IRQ_MASK, + .virq = SPEAR300_VIRQ_I2S, + .enb_mask = SPEAR300_I2S_IRQ_MASK, + .status_mask = SPEAR300_I2S_IRQ_MASK, }, { - .virq = VIRQ_TDM, - .enb_mask = TDM_IRQ_MASK, - .status_mask = TDM_IRQ_MASK, + .virq = SPEAR300_VIRQ_TDM, + .enb_mask = SPEAR300_TDM_IRQ_MASK, + .status_mask = SPEAR300_TDM_IRQ_MASK, }, { - .virq = VIRQ_CAMERA_L, - .enb_mask = CAMERA_L_IRQ_MASK, - .status_mask = CAMERA_L_IRQ_MASK, + .virq = SPEAR300_VIRQ_CAMERA_L, + .enb_mask = SPEAR300_CAMERA_L_IRQ_MASK, + .status_mask = SPEAR300_CAMERA_L_IRQ_MASK, }, { - .virq = VIRQ_CAMERA_F, - .enb_mask = CAMERA_F_IRQ_MASK, - .status_mask = CAMERA_F_IRQ_MASK, + .virq = SPEAR300_VIRQ_CAMERA_F, + .enb_mask = SPEAR300_CAMERA_F_IRQ_MASK, + .status_mask = SPEAR300_CAMERA_F_IRQ_MASK, }, { - .virq = VIRQ_CAMERA_V, - .enb_mask = CAMERA_V_IRQ_MASK, - .status_mask = CAMERA_V_IRQ_MASK, + .virq = SPEAR300_VIRQ_CAMERA_V, + .enb_mask = SPEAR300_CAMERA_V_IRQ_MASK, + .status_mask = SPEAR300_CAMERA_V_IRQ_MASK, }, { - .virq = VIRQ_KEYBOARD, - .enb_mask = KEYBOARD_IRQ_MASK, - .status_mask = KEYBOARD_IRQ_MASK, + .virq = SPEAR300_VIRQ_KEYBOARD, + .enb_mask = SPEAR300_KEYBOARD_IRQ_MASK, + .status_mask = SPEAR300_KEYBOARD_IRQ_MASK, }, { - .virq = VIRQ_GPIO1, - .enb_mask = GPIO1_IRQ_MASK, - .status_mask = GPIO1_IRQ_MASK, + .virq = SPEAR300_VIRQ_GPIO1, + .enb_mask = SPEAR300_GPIO1_IRQ_MASK, + .status_mask = SPEAR300_GPIO1_IRQ_MASK, }, }; -struct spear_shirq shirq_ras1 = { - .irq = IRQ_GEN_RAS_1, +static struct spear_shirq shirq_ras1 = { + .irq = SPEAR3XX_IRQ_GEN_RAS_1, .dev_config = shirq_ras1_config, .dev_count = ARRAY_SIZE(shirq_ras1_config), .regs = { - .enb_reg = INT_ENB_MASK_REG, - .status_reg = INT_STS_MASK_REG, - .status_reg_mask = SHIRQ_RAS1_MASK, + .enb_reg = SPEAR300_INT_ENB_MASK_REG, + .status_reg = SPEAR300_INT_STS_MASK_REG, + .status_reg_mask = SPEAR300_SHIRQ_RAS1_MASK, .clear_reg = -1, }, }; @@ -427,10 +427,10 @@ struct spear_shirq shirq_ras1 = { /* arm gpio1 device registration */ static struct pl061_platform_data gpio1_plat_data = { .gpio_base = 8, - .irq_base = SPEAR_GPIO1_INT_BASE, + .irq_base = SPEAR300_GPIO1_INT_BASE, }; -struct amba_device gpio1_device = { +struct amba_device spear300_gpio1_device = { .dev = { .init_name = "gpio1", .platform_data = &gpio1_plat_data, @@ -440,11 +440,12 @@ struct amba_device gpio1_device = { .end = SPEAR300_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {VIRQ_GPIO1, NO_IRQ}, + .irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ}, }; /* spear300 routines */ -void __init spear300_init(void) +void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, + u8 pmx_dev_count) { int ret = 0; @@ -460,6 +461,10 @@ void __init spear300_init(void) } /* pmx initialization */ + pmx_driver.mode = pmx_mode; + pmx_driver.devs = pmx_devs; + pmx_driver.devs_count = pmx_dev_count; + pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K); if (pmx_driver.base) { ret = pmx_register(&pmx_driver); diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c index 42d2253ef540..69006f694220 100644 --- a/arch/arm/mach-spear3xx/spear300_evb.c +++ b/arch/arm/mach-spear3xx/spear300_evb.c @@ -19,26 +19,26 @@ /* padmux devices to enable */ static struct pmx_dev *pmx_devs[] = { /* spear3xx specific devices */ - &pmx_i2c, - &pmx_ssp_cs, - &pmx_ssp, - &pmx_mii, - &pmx_uart0, + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp_cs, + &spear3xx_pmx_ssp, + &spear3xx_pmx_mii, + &spear3xx_pmx_uart0, /* spear300 specific devices */ - &pmx_fsmc_2_chips, - &pmx_clcd, - &pmx_telecom_sdhci_4bit, - &pmx_gpio1, + &spear300_pmx_fsmc_2_chips, + &spear300_pmx_clcd, + &spear300_pmx_telecom_sdhci_4bit, + &spear300_pmx_gpio1, }; static struct amba_device *amba_devs[] __initdata = { /* spear3xx specific devices */ - &gpio_device, - &uart_device, + &spear3xx_gpio_device, + &spear3xx_uart_device, /* spear300 specific devices */ - &gpio1_device, + &spear300_gpio1_device, }; static struct platform_device *plat_devs[] __initdata = { @@ -51,13 +51,9 @@ static void __init spear300_evb_init(void) { unsigned int i; - /* padmux initialization, must be done before spear300_init */ - pmx_driver.mode = &photo_frame_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = ARRAY_SIZE(pmx_devs); - /* call spear300 machine init function */ - spear300_init(); + spear300_init(&spear300_photo_frame_mode, pmx_devs, + ARRAY_SIZE(pmx_devs)); /* Add Platform Devices */ platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index 5c0a67b60c2a..9004cf9f01bf 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -22,112 +22,112 @@ #define PAD_MUX_CONFIG_REG 0x08 /* devices */ -struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = { +static struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = { { .ids = 0x00, .mask = PMX_TIMER_3_4_MASK, }, }; -struct pmx_dev pmx_emi_cs_0_1_4_5 = { +struct pmx_dev spear310_pmx_emi_cs_0_1_4_5 = { .name = "emi_cs_0_1_4_5", .modes = pmx_emi_cs_0_1_4_5_modes, .mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = { +static struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = { { .ids = 0x00, .mask = PMX_TIMER_1_2_MASK, }, }; -struct pmx_dev pmx_emi_cs_2_3 = { +struct pmx_dev spear310_pmx_emi_cs_2_3 = { .name = "emi_cs_2_3", .modes = pmx_emi_cs_2_3_modes, .mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_uart1_modes[] = { +static struct pmx_dev_mode pmx_uart1_modes[] = { { .ids = 0x00, .mask = PMX_FIRDA_MASK, }, }; -struct pmx_dev pmx_uart1 = { +struct pmx_dev spear310_pmx_uart1 = { .name = "uart1", .modes = pmx_uart1_modes, .mode_count = ARRAY_SIZE(pmx_uart1_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_uart2_modes[] = { +static struct pmx_dev_mode pmx_uart2_modes[] = { { .ids = 0x00, .mask = PMX_TIMER_1_2_MASK, }, }; -struct pmx_dev pmx_uart2 = { +struct pmx_dev spear310_pmx_uart2 = { .name = "uart2", .modes = pmx_uart2_modes, .mode_count = ARRAY_SIZE(pmx_uart2_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_uart3_4_5_modes[] = { +static struct pmx_dev_mode pmx_uart3_4_5_modes[] = { { .ids = 0x00, .mask = PMX_UART0_MODEM_MASK, }, }; -struct pmx_dev pmx_uart3_4_5 = { +struct pmx_dev spear310_pmx_uart3_4_5 = { .name = "uart3_4_5", .modes = pmx_uart3_4_5_modes, .mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_fsmc_modes[] = { +static struct pmx_dev_mode pmx_fsmc_modes[] = { { .ids = 0x00, .mask = PMX_SSP_CS_MASK, }, }; -struct pmx_dev pmx_fsmc = { +struct pmx_dev spear310_pmx_fsmc = { .name = "fsmc", .modes = pmx_fsmc_modes, .mode_count = ARRAY_SIZE(pmx_fsmc_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_rs485_0_1_modes[] = { +static struct pmx_dev_mode pmx_rs485_0_1_modes[] = { { .ids = 0x00, .mask = PMX_MII_MASK, }, }; -struct pmx_dev pmx_rs485_0_1 = { +struct pmx_dev spear310_pmx_rs485_0_1 = { .name = "rs485_0_1", .modes = pmx_rs485_0_1_modes, .mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_tdm0_modes[] = { +static struct pmx_dev_mode pmx_tdm0_modes[] = { { .ids = 0x00, .mask = PMX_MII_MASK, }, }; -struct pmx_dev pmx_tdm0 = { +struct pmx_dev spear310_pmx_tdm0 = { .name = "tdm0", .modes = pmx_tdm0_modes, .mode_count = ARRAY_SIZE(pmx_tdm0_modes), @@ -135,122 +135,122 @@ struct pmx_dev pmx_tdm0 = { }; /* pmx driver structure */ -struct pmx_driver pmx_driver = { +static struct pmx_driver pmx_driver = { .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, }; /* spear3xx shared irq */ -struct shirq_dev_config shirq_ras1_config[] = { +static struct shirq_dev_config shirq_ras1_config[] = { { - .virq = VIRQ_SMII0, - .status_mask = SMII0_IRQ_MASK, + .virq = SPEAR310_VIRQ_SMII0, + .status_mask = SPEAR310_SMII0_IRQ_MASK, }, { - .virq = VIRQ_SMII1, - .status_mask = SMII1_IRQ_MASK, + .virq = SPEAR310_VIRQ_SMII1, + .status_mask = SPEAR310_SMII1_IRQ_MASK, }, { - .virq = VIRQ_SMII2, - .status_mask = SMII2_IRQ_MASK, + .virq = SPEAR310_VIRQ_SMII2, + .status_mask = SPEAR310_SMII2_IRQ_MASK, }, { - .virq = VIRQ_SMII3, - .status_mask = SMII3_IRQ_MASK, + .virq = SPEAR310_VIRQ_SMII3, + .status_mask = SPEAR310_SMII3_IRQ_MASK, }, { - .virq = VIRQ_WAKEUP_SMII0, - .status_mask = WAKEUP_SMII0_IRQ_MASK, + .virq = SPEAR310_VIRQ_WAKEUP_SMII0, + .status_mask = SPEAR310_WAKEUP_SMII0_IRQ_MASK, }, { - .virq = VIRQ_WAKEUP_SMII1, - .status_mask = WAKEUP_SMII1_IRQ_MASK, + .virq = SPEAR310_VIRQ_WAKEUP_SMII1, + .status_mask = SPEAR310_WAKEUP_SMII1_IRQ_MASK, }, { - .virq = VIRQ_WAKEUP_SMII2, - .status_mask = WAKEUP_SMII2_IRQ_MASK, + .virq = SPEAR310_VIRQ_WAKEUP_SMII2, + .status_mask = SPEAR310_WAKEUP_SMII2_IRQ_MASK, }, { - .virq = VIRQ_WAKEUP_SMII3, - .status_mask = WAKEUP_SMII3_IRQ_MASK, + .virq = SPEAR310_VIRQ_WAKEUP_SMII3, + .status_mask = SPEAR310_WAKEUP_SMII3_IRQ_MASK, }, }; -struct spear_shirq shirq_ras1 = { - .irq = IRQ_GEN_RAS_1, +static struct spear_shirq shirq_ras1 = { + .irq = SPEAR3XX_IRQ_GEN_RAS_1, .dev_config = shirq_ras1_config, .dev_count = ARRAY_SIZE(shirq_ras1_config), .regs = { .enb_reg = -1, - .status_reg = INT_STS_MASK_REG, - .status_reg_mask = SHIRQ_RAS1_MASK, + .status_reg = SPEAR310_INT_STS_MASK_REG, + .status_reg_mask = SPEAR310_SHIRQ_RAS1_MASK, .clear_reg = -1, }, }; -struct shirq_dev_config shirq_ras2_config[] = { +static struct shirq_dev_config shirq_ras2_config[] = { { - .virq = VIRQ_UART1, - .status_mask = UART1_IRQ_MASK, + .virq = SPEAR310_VIRQ_UART1, + .status_mask = SPEAR310_UART1_IRQ_MASK, }, { - .virq = VIRQ_UART2, - .status_mask = UART2_IRQ_MASK, + .virq = SPEAR310_VIRQ_UART2, + .status_mask = SPEAR310_UART2_IRQ_MASK, }, { - .virq = VIRQ_UART3, - .status_mask = UART3_IRQ_MASK, + .virq = SPEAR310_VIRQ_UART3, + .status_mask = SPEAR310_UART3_IRQ_MASK, }, { - .virq = VIRQ_UART4, - .status_mask = UART4_IRQ_MASK, + .virq = SPEAR310_VIRQ_UART4, + .status_mask = SPEAR310_UART4_IRQ_MASK, }, { - .virq = VIRQ_UART5, - .status_mask = UART5_IRQ_MASK, + .virq = SPEAR310_VIRQ_UART5, + .status_mask = SPEAR310_UART5_IRQ_MASK, }, }; -struct spear_shirq shirq_ras2 = { - .irq = IRQ_GEN_RAS_2, +static struct spear_shirq shirq_ras2 = { + .irq = SPEAR3XX_IRQ_GEN_RAS_2, .dev_config = shirq_ras2_config, .dev_count = ARRAY_SIZE(shirq_ras2_config), .regs = { .enb_reg = -1, - .status_reg = INT_STS_MASK_REG, - .status_reg_mask = SHIRQ_RAS2_MASK, + .status_reg = SPEAR310_INT_STS_MASK_REG, + .status_reg_mask = SPEAR310_SHIRQ_RAS2_MASK, .clear_reg = -1, }, }; -struct shirq_dev_config shirq_ras3_config[] = { +static struct shirq_dev_config shirq_ras3_config[] = { { - .virq = VIRQ_EMI, - .status_mask = EMI_IRQ_MASK, + .virq = SPEAR310_VIRQ_EMI, + .status_mask = SPEAR310_EMI_IRQ_MASK, }, }; -struct spear_shirq shirq_ras3 = { - .irq = IRQ_GEN_RAS_3, +static struct spear_shirq shirq_ras3 = { + .irq = SPEAR3XX_IRQ_GEN_RAS_3, .dev_config = shirq_ras3_config, .dev_count = ARRAY_SIZE(shirq_ras3_config), .regs = { .enb_reg = -1, - .status_reg = INT_STS_MASK_REG, - .status_reg_mask = SHIRQ_RAS3_MASK, + .status_reg = SPEAR310_INT_STS_MASK_REG, + .status_reg_mask = SPEAR310_SHIRQ_RAS3_MASK, .clear_reg = -1, }, }; -struct shirq_dev_config shirq_intrcomm_ras_config[] = { +static struct shirq_dev_config shirq_intrcomm_ras_config[] = { { - .virq = VIRQ_TDM_HDLC, - .status_mask = TDM_HDLC_IRQ_MASK, + .virq = SPEAR310_VIRQ_TDM_HDLC, + .status_mask = SPEAR310_TDM_HDLC_IRQ_MASK, }, { - .virq = VIRQ_RS485_0, - .status_mask = RS485_0_IRQ_MASK, + .virq = SPEAR310_VIRQ_RS485_0, + .status_mask = SPEAR310_RS485_0_IRQ_MASK, }, { - .virq = VIRQ_RS485_1, - .status_mask = RS485_1_IRQ_MASK, + .virq = SPEAR310_VIRQ_RS485_1, + .status_mask = SPEAR310_RS485_1_IRQ_MASK, }, }; -struct spear_shirq shirq_intrcomm_ras = { - .irq = IRQ_INTRCOMM_RAS_ARM, +static struct spear_shirq shirq_intrcomm_ras = { + .irq = SPEAR3XX_IRQ_INTRCOMM_RAS_ARM, .dev_config = shirq_intrcomm_ras_config, .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config), .regs = { .enb_reg = -1, - .status_reg = INT_STS_MASK_REG, - .status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK, + .status_reg = SPEAR310_INT_STS_MASK_REG, + .status_reg_mask = SPEAR310_SHIRQ_INTRCOMM_RAS_MASK, .clear_reg = -1, }, }; @@ -258,7 +258,8 @@ struct spear_shirq shirq_intrcomm_ras = { /* Add spear310 specific devices here */ /* spear310 routines */ -void __init spear310_init(void) +void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, + u8 pmx_dev_count) { void __iomem *base; int ret = 0; @@ -296,6 +297,10 @@ void __init spear310_init(void) /* pmx initialization */ pmx_driver.base = base; + pmx_driver.mode = pmx_mode; + pmx_driver.devs = pmx_devs; + pmx_driver.devs_count = pmx_dev_count; + ret = pmx_register(&pmx_driver); if (ret) printk(KERN_ERR "padmux: registeration failed. err no: %d\n", diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c index 2d7f333bd67b..c8684ce1f9b3 100644 --- a/arch/arm/mach-spear3xx/spear310_evb.c +++ b/arch/arm/mach-spear3xx/spear310_evb.c @@ -19,31 +19,31 @@ /* padmux devices to enable */ static struct pmx_dev *pmx_devs[] = { /* spear3xx specific devices */ - &pmx_i2c, - &pmx_ssp, - &pmx_gpio_pin0, - &pmx_gpio_pin1, - &pmx_gpio_pin2, - &pmx_gpio_pin3, - &pmx_gpio_pin4, - &pmx_gpio_pin5, - &pmx_uart0, + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp, + &spear3xx_pmx_gpio_pin0, + &spear3xx_pmx_gpio_pin1, + &spear3xx_pmx_gpio_pin2, + &spear3xx_pmx_gpio_pin3, + &spear3xx_pmx_gpio_pin4, + &spear3xx_pmx_gpio_pin5, + &spear3xx_pmx_uart0, /* spear310 specific devices */ - &pmx_emi_cs_0_1_4_5, - &pmx_emi_cs_2_3, - &pmx_uart1, - &pmx_uart2, - &pmx_uart3_4_5, - &pmx_fsmc, - &pmx_rs485_0_1, - &pmx_tdm0, + &spear310_pmx_emi_cs_0_1_4_5, + &spear310_pmx_emi_cs_2_3, + &spear310_pmx_uart1, + &spear310_pmx_uart2, + &spear310_pmx_uart3_4_5, + &spear310_pmx_fsmc, + &spear310_pmx_rs485_0_1, + &spear310_pmx_tdm0, }; static struct amba_device *amba_devs[] __initdata = { /* spear3xx specific devices */ - &gpio_device, - &uart_device, + &spear3xx_gpio_device, + &spear3xx_uart_device, /* spear310 specific devices */ }; @@ -58,13 +58,8 @@ static void __init spear310_evb_init(void) { unsigned int i; - /* padmux initialization, must be done before spear310_init */ - pmx_driver.mode = NULL; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = ARRAY_SIZE(pmx_devs); - /* call spear310 machine init function */ - spear310_init(); + spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs)); /* Add Platform Devices */ platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 741c1f414cbd..ee29bef43074 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -29,88 +29,88 @@ #define SMALL_PRINTERS_MODE (1 << 3) #define ALL_MODES 0xF -struct pmx_mode auto_net_smii_mode = { +struct pmx_mode spear320_auto_net_smii_mode = { .id = AUTO_NET_SMII_MODE, .name = "Automation Networking SMII Mode", .mask = 0x00, }; -struct pmx_mode auto_net_mii_mode = { +struct pmx_mode spear320_auto_net_mii_mode = { .id = AUTO_NET_MII_MODE, .name = "Automation Networking MII Mode", .mask = 0x01, }; -struct pmx_mode auto_exp_mode = { +struct pmx_mode spear320_auto_exp_mode = { .id = AUTO_EXP_MODE, .name = "Automation Expanded Mode", .mask = 0x02, }; -struct pmx_mode small_printers_mode = { +struct pmx_mode spear320_small_printers_mode = { .id = SMALL_PRINTERS_MODE, .name = "Small Printers Mode", .mask = 0x03, }; /* devices */ -struct pmx_dev_mode pmx_clcd_modes[] = { +static struct pmx_dev_mode pmx_clcd_modes[] = { { .ids = AUTO_NET_SMII_MODE, .mask = 0x0, }, }; -struct pmx_dev pmx_clcd = { +struct pmx_dev spear320_pmx_clcd = { .name = "clcd", .modes = pmx_clcd_modes, .mode_count = ARRAY_SIZE(pmx_clcd_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_emi_modes[] = { +static struct pmx_dev_mode pmx_emi_modes[] = { { .ids = AUTO_EXP_MODE, .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, }, }; -struct pmx_dev pmx_emi = { +struct pmx_dev spear320_pmx_emi = { .name = "emi", .modes = pmx_emi_modes, .mode_count = ARRAY_SIZE(pmx_emi_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_fsmc_modes[] = { +static struct pmx_dev_mode pmx_fsmc_modes[] = { { .ids = ALL_MODES, .mask = 0x0, }, }; -struct pmx_dev pmx_fsmc = { +struct pmx_dev spear320_pmx_fsmc = { .name = "fsmc", .modes = pmx_fsmc_modes, .mode_count = ARRAY_SIZE(pmx_fsmc_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_spp_modes[] = { +static struct pmx_dev_mode pmx_spp_modes[] = { { .ids = SMALL_PRINTERS_MODE, .mask = 0x0, }, }; -struct pmx_dev pmx_spp = { +struct pmx_dev spear320_pmx_spp = { .name = "spp", .modes = pmx_spp_modes, .mode_count = ARRAY_SIZE(pmx_spp_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_sdhci_modes[] = { +static struct pmx_dev_mode pmx_sdhci_modes[] = { { .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | SMALL_PRINTERS_MODE, @@ -118,42 +118,42 @@ struct pmx_dev_mode pmx_sdhci_modes[] = { }, }; -struct pmx_dev pmx_sdhci = { +struct pmx_dev spear320_pmx_sdhci = { .name = "sdhci", .modes = pmx_sdhci_modes, .mode_count = ARRAY_SIZE(pmx_sdhci_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_i2s_modes[] = { +static struct pmx_dev_mode pmx_i2s_modes[] = { { .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, .mask = PMX_UART0_MODEM_MASK, }, }; -struct pmx_dev pmx_i2s = { +struct pmx_dev spear320_pmx_i2s = { .name = "i2s", .modes = pmx_i2s_modes, .mode_count = ARRAY_SIZE(pmx_i2s_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_uart1_modes[] = { +static struct pmx_dev_mode pmx_uart1_modes[] = { { .ids = ALL_MODES, .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK, }, }; -struct pmx_dev pmx_uart1 = { +struct pmx_dev spear320_pmx_uart1 = { .name = "uart1", .modes = pmx_uart1_modes, .mode_count = ARRAY_SIZE(pmx_uart1_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_uart1_modem_modes[] = { +static struct pmx_dev_mode pmx_uart1_modem_modes[] = { { .ids = AUTO_EXP_MODE, .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | @@ -165,42 +165,42 @@ struct pmx_dev_mode pmx_uart1_modem_modes[] = { }, }; -struct pmx_dev pmx_uart1_modem = { +struct pmx_dev spear320_pmx_uart1_modem = { .name = "uart1_modem", .modes = pmx_uart1_modem_modes, .mode_count = ARRAY_SIZE(pmx_uart1_modem_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_uart2_modes[] = { +static struct pmx_dev_mode pmx_uart2_modes[] = { { .ids = ALL_MODES, .mask = PMX_FIRDA_MASK, }, }; -struct pmx_dev pmx_uart2 = { +struct pmx_dev spear320_pmx_uart2 = { .name = "uart2", .modes = pmx_uart2_modes, .mode_count = ARRAY_SIZE(pmx_uart2_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_touchscreen_modes[] = { +static struct pmx_dev_mode pmx_touchscreen_modes[] = { { .ids = AUTO_NET_SMII_MODE, .mask = PMX_SSP_CS_MASK, }, }; -struct pmx_dev pmx_touchscreen = { +struct pmx_dev spear320_pmx_touchscreen = { .name = "touchscreen", .modes = pmx_touchscreen_modes, .mode_count = ARRAY_SIZE(pmx_touchscreen_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_can_modes[] = { +static struct pmx_dev_mode pmx_can_modes[] = { { .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE, .mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | @@ -208,28 +208,28 @@ struct pmx_dev_mode pmx_can_modes[] = { }, }; -struct pmx_dev pmx_can = { +struct pmx_dev spear320_pmx_can = { .name = "can", .modes = pmx_can_modes, .mode_count = ARRAY_SIZE(pmx_can_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_sdhci_led_modes[] = { +static struct pmx_dev_mode pmx_sdhci_led_modes[] = { { .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, .mask = PMX_SSP_CS_MASK, }, }; -struct pmx_dev pmx_sdhci_led = { +struct pmx_dev spear320_pmx_sdhci_led = { .name = "sdhci_led", .modes = pmx_sdhci_led_modes, .mode_count = ARRAY_SIZE(pmx_sdhci_led_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_pwm0_modes[] = { +static struct pmx_dev_mode pmx_pwm0_modes[] = { { .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, .mask = PMX_UART0_MODEM_MASK, @@ -239,14 +239,14 @@ struct pmx_dev_mode pmx_pwm0_modes[] = { }, }; -struct pmx_dev pmx_pwm0 = { +struct pmx_dev spear320_pmx_pwm0 = { .name = "pwm0", .modes = pmx_pwm0_modes, .mode_count = ARRAY_SIZE(pmx_pwm0_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_pwm1_modes[] = { +static struct pmx_dev_mode pmx_pwm1_modes[] = { { .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, .mask = PMX_UART0_MODEM_MASK, @@ -256,14 +256,14 @@ struct pmx_dev_mode pmx_pwm1_modes[] = { }, }; -struct pmx_dev pmx_pwm1 = { +struct pmx_dev spear320_pmx_pwm1 = { .name = "pwm1", .modes = pmx_pwm1_modes, .mode_count = ARRAY_SIZE(pmx_pwm1_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_pwm2_modes[] = { +static struct pmx_dev_mode pmx_pwm2_modes[] = { { .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, .mask = PMX_SSP_CS_MASK, @@ -273,105 +273,105 @@ struct pmx_dev_mode pmx_pwm2_modes[] = { }, }; -struct pmx_dev pmx_pwm2 = { +struct pmx_dev spear320_pmx_pwm2 = { .name = "pwm2", .modes = pmx_pwm2_modes, .mode_count = ARRAY_SIZE(pmx_pwm2_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_pwm3_modes[] = { +static struct pmx_dev_mode pmx_pwm3_modes[] = { { .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE, .mask = PMX_MII_MASK, }, }; -struct pmx_dev pmx_pwm3 = { +struct pmx_dev spear320_pmx_pwm3 = { .name = "pwm3", .modes = pmx_pwm3_modes, .mode_count = ARRAY_SIZE(pmx_pwm3_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_ssp1_modes[] = { +static struct pmx_dev_mode pmx_ssp1_modes[] = { { .ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE, .mask = PMX_MII_MASK, }, }; -struct pmx_dev pmx_ssp1 = { +struct pmx_dev spear320_pmx_ssp1 = { .name = "ssp1", .modes = pmx_ssp1_modes, .mode_count = ARRAY_SIZE(pmx_ssp1_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_ssp2_modes[] = { +static struct pmx_dev_mode pmx_ssp2_modes[] = { { .ids = AUTO_NET_SMII_MODE, .mask = PMX_MII_MASK, }, }; -struct pmx_dev pmx_ssp2 = { +struct pmx_dev spear320_pmx_ssp2 = { .name = "ssp2", .modes = pmx_ssp2_modes, .mode_count = ARRAY_SIZE(pmx_ssp2_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_mii1_modes[] = { +static struct pmx_dev_mode pmx_mii1_modes[] = { { .ids = AUTO_NET_MII_MODE, .mask = 0x0, }, }; -struct pmx_dev pmx_mii1 = { +struct pmx_dev spear320_pmx_mii1 = { .name = "mii1", .modes = pmx_mii1_modes, .mode_count = ARRAY_SIZE(pmx_mii1_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_smii0_modes[] = { +static struct pmx_dev_mode pmx_smii0_modes[] = { { .ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE, .mask = PMX_MII_MASK, }, }; -struct pmx_dev pmx_smii0 = { +struct pmx_dev spear320_pmx_smii0 = { .name = "smii0", .modes = pmx_smii0_modes, .mode_count = ARRAY_SIZE(pmx_smii0_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_smii1_modes[] = { +static struct pmx_dev_mode pmx_smii1_modes[] = { { .ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE, .mask = PMX_MII_MASK, }, }; -struct pmx_dev pmx_smii1 = { +struct pmx_dev spear320_pmx_smii1 = { .name = "smii1", .modes = pmx_smii1_modes, .mode_count = ARRAY_SIZE(pmx_smii1_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_i2c1_modes[] = { +static struct pmx_dev_mode pmx_i2c1_modes[] = { { .ids = AUTO_EXP_MODE, .mask = 0x0, }, }; -struct pmx_dev pmx_i2c1 = { +struct pmx_dev spear320_pmx_i2c1 = { .name = "i2c1", .modes = pmx_i2c1_modes, .mode_count = ARRAY_SIZE(pmx_i2c1_modes), @@ -379,131 +379,131 @@ struct pmx_dev pmx_i2c1 = { }; /* pmx driver structure */ -struct pmx_driver pmx_driver = { +static struct pmx_driver pmx_driver = { .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007}, .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, }; /* spear3xx shared irq */ -struct shirq_dev_config shirq_ras1_config[] = { +static struct shirq_dev_config shirq_ras1_config[] = { { - .virq = VIRQ_EMI, - .status_mask = EMI_IRQ_MASK, - .clear_mask = EMI_IRQ_MASK, + .virq = SPEAR320_VIRQ_EMI, + .status_mask = SPEAR320_EMI_IRQ_MASK, + .clear_mask = SPEAR320_EMI_IRQ_MASK, }, { - .virq = VIRQ_CLCD, - .status_mask = CLCD_IRQ_MASK, - .clear_mask = CLCD_IRQ_MASK, + .virq = SPEAR320_VIRQ_CLCD, + .status_mask = SPEAR320_CLCD_IRQ_MASK, + .clear_mask = SPEAR320_CLCD_IRQ_MASK, }, { - .virq = VIRQ_SPP, - .status_mask = SPP_IRQ_MASK, - .clear_mask = SPP_IRQ_MASK, + .virq = SPEAR320_VIRQ_SPP, + .status_mask = SPEAR320_SPP_IRQ_MASK, + .clear_mask = SPEAR320_SPP_IRQ_MASK, }, }; -struct spear_shirq shirq_ras1 = { - .irq = IRQ_GEN_RAS_1, +static struct spear_shirq shirq_ras1 = { + .irq = SPEAR3XX_IRQ_GEN_RAS_1, .dev_config = shirq_ras1_config, .dev_count = ARRAY_SIZE(shirq_ras1_config), .regs = { .enb_reg = -1, - .status_reg = INT_STS_MASK_REG, - .status_reg_mask = SHIRQ_RAS1_MASK, - .clear_reg = INT_CLR_MASK_REG, + .status_reg = SPEAR320_INT_STS_MASK_REG, + .status_reg_mask = SPEAR320_SHIRQ_RAS1_MASK, + .clear_reg = SPEAR320_INT_CLR_MASK_REG, .reset_to_clear = 1, }, }; -struct shirq_dev_config shirq_ras3_config[] = { +static struct shirq_dev_config shirq_ras3_config[] = { { - .virq = VIRQ_PLGPIO, - .enb_mask = GPIO_IRQ_MASK, - .status_mask = GPIO_IRQ_MASK, - .clear_mask = GPIO_IRQ_MASK, + .virq = SPEAR320_VIRQ_PLGPIO, + .enb_mask = SPEAR320_GPIO_IRQ_MASK, + .status_mask = SPEAR320_GPIO_IRQ_MASK, + .clear_mask = SPEAR320_GPIO_IRQ_MASK, }, { - .virq = VIRQ_I2S_PLAY, - .enb_mask = I2S_PLAY_IRQ_MASK, - .status_mask = I2S_PLAY_IRQ_MASK, - .clear_mask = I2S_PLAY_IRQ_MASK, + .virq = SPEAR320_VIRQ_I2S_PLAY, + .enb_mask = SPEAR320_I2S_PLAY_IRQ_MASK, + .status_mask = SPEAR320_I2S_PLAY_IRQ_MASK, + .clear_mask = SPEAR320_I2S_PLAY_IRQ_MASK, }, { - .virq = VIRQ_I2S_REC, - .enb_mask = I2S_REC_IRQ_MASK, - .status_mask = I2S_REC_IRQ_MASK, - .clear_mask = I2S_REC_IRQ_MASK, + .virq = SPEAR320_VIRQ_I2S_REC, + .enb_mask = SPEAR320_I2S_REC_IRQ_MASK, + .status_mask = SPEAR320_I2S_REC_IRQ_MASK, + .clear_mask = SPEAR320_I2S_REC_IRQ_MASK, }, }; -struct spear_shirq shirq_ras3 = { - .irq = IRQ_GEN_RAS_3, +static struct spear_shirq shirq_ras3 = { + .irq = SPEAR3XX_IRQ_GEN_RAS_3, .dev_config = shirq_ras3_config, .dev_count = ARRAY_SIZE(shirq_ras3_config), .regs = { - .enb_reg = INT_ENB_MASK_REG, + .enb_reg = SPEAR320_INT_ENB_MASK_REG, .reset_to_enb = 1, - .status_reg = INT_STS_MASK_REG, - .status_reg_mask = SHIRQ_RAS3_MASK, - .clear_reg = INT_CLR_MASK_REG, + .status_reg = SPEAR320_INT_STS_MASK_REG, + .status_reg_mask = SPEAR320_SHIRQ_RAS3_MASK, + .clear_reg = SPEAR320_INT_CLR_MASK_REG, .reset_to_clear = 1, }, }; -struct shirq_dev_config shirq_intrcomm_ras_config[] = { +static struct shirq_dev_config shirq_intrcomm_ras_config[] = { { - .virq = VIRQ_CANU, - .status_mask = CAN_U_IRQ_MASK, - .clear_mask = CAN_U_IRQ_MASK, + .virq = SPEAR320_VIRQ_CANU, + .status_mask = SPEAR320_CAN_U_IRQ_MASK, + .clear_mask = SPEAR320_CAN_U_IRQ_MASK, }, { - .virq = VIRQ_CANL, - .status_mask = CAN_L_IRQ_MASK, - .clear_mask = CAN_L_IRQ_MASK, + .virq = SPEAR320_VIRQ_CANL, + .status_mask = SPEAR320_CAN_L_IRQ_MASK, + .clear_mask = SPEAR320_CAN_L_IRQ_MASK, }, { - .virq = VIRQ_UART1, - .status_mask = UART1_IRQ_MASK, - .clear_mask = UART1_IRQ_MASK, + .virq = SPEAR320_VIRQ_UART1, + .status_mask = SPEAR320_UART1_IRQ_MASK, + .clear_mask = SPEAR320_UART1_IRQ_MASK, }, { - .virq = VIRQ_UART2, - .status_mask = UART2_IRQ_MASK, - .clear_mask = UART2_IRQ_MASK, + .virq = SPEAR320_VIRQ_UART2, + .status_mask = SPEAR320_UART2_IRQ_MASK, + .clear_mask = SPEAR320_UART2_IRQ_MASK, }, { - .virq = VIRQ_SSP1, - .status_mask = SSP1_IRQ_MASK, - .clear_mask = SSP1_IRQ_MASK, + .virq = SPEAR320_VIRQ_SSP1, + .status_mask = SPEAR320_SSP1_IRQ_MASK, + .clear_mask = SPEAR320_SSP1_IRQ_MASK, }, { - .virq = VIRQ_SSP2, - .status_mask = SSP2_IRQ_MASK, - .clear_mask = SSP2_IRQ_MASK, + .virq = SPEAR320_VIRQ_SSP2, + .status_mask = SPEAR320_SSP2_IRQ_MASK, + .clear_mask = SPEAR320_SSP2_IRQ_MASK, }, { - .virq = VIRQ_SMII0, - .status_mask = SMII0_IRQ_MASK, - .clear_mask = SMII0_IRQ_MASK, + .virq = SPEAR320_VIRQ_SMII0, + .status_mask = SPEAR320_SMII0_IRQ_MASK, + .clear_mask = SPEAR320_SMII0_IRQ_MASK, }, { - .virq = VIRQ_MII1_SMII1, - .status_mask = MII1_SMII1_IRQ_MASK, - .clear_mask = MII1_SMII1_IRQ_MASK, + .virq = SPEAR320_VIRQ_MII1_SMII1, + .status_mask = SPEAR320_MII1_SMII1_IRQ_MASK, + .clear_mask = SPEAR320_MII1_SMII1_IRQ_MASK, }, { - .virq = VIRQ_WAKEUP_SMII0, - .status_mask = WAKEUP_SMII0_IRQ_MASK, - .clear_mask = WAKEUP_SMII0_IRQ_MASK, + .virq = SPEAR320_VIRQ_WAKEUP_SMII0, + .status_mask = SPEAR320_WAKEUP_SMII0_IRQ_MASK, + .clear_mask = SPEAR320_WAKEUP_SMII0_IRQ_MASK, }, { - .virq = VIRQ_WAKEUP_MII1_SMII1, - .status_mask = WAKEUP_MII1_SMII1_IRQ_MASK, - .clear_mask = WAKEUP_MII1_SMII1_IRQ_MASK, + .virq = SPEAR320_VIRQ_WAKEUP_MII1_SMII1, + .status_mask = SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK, + .clear_mask = SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK, }, { - .virq = VIRQ_I2C, - .status_mask = I2C1_IRQ_MASK, - .clear_mask = I2C1_IRQ_MASK, + .virq = SPEAR320_VIRQ_I2C1, + .status_mask = SPEAR320_I2C1_IRQ_MASK, + .clear_mask = SPEAR320_I2C1_IRQ_MASK, }, }; -struct spear_shirq shirq_intrcomm_ras = { - .irq = IRQ_INTRCOMM_RAS_ARM, +static struct spear_shirq shirq_intrcomm_ras = { + .irq = SPEAR3XX_IRQ_INTRCOMM_RAS_ARM, .dev_config = shirq_intrcomm_ras_config, .dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config), .regs = { .enb_reg = -1, - .status_reg = INT_STS_MASK_REG, - .status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK, - .clear_reg = INT_CLR_MASK_REG, + .status_reg = SPEAR320_INT_STS_MASK_REG, + .status_reg_mask = SPEAR320_SHIRQ_INTRCOMM_RAS_MASK, + .clear_reg = SPEAR320_INT_CLR_MASK_REG, .reset_to_clear = 1, }, }; @@ -511,7 +511,8 @@ struct spear_shirq shirq_intrcomm_ras = { /* Add spear320 specific devices here */ /* spear320 routines */ -void __init spear320_init(void) +void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, + u8 pmx_dev_count) { void __iomem *base; int ret = 0; @@ -543,6 +544,10 @@ void __init spear320_init(void) /* pmx initialization */ pmx_driver.base = base; + pmx_driver.mode = pmx_mode; + pmx_driver.devs = pmx_devs; + pmx_driver.devs_count = pmx_dev_count; + ret = pmx_register(&pmx_driver); if (ret) printk(KERN_ERR "padmux: registeration failed. err no: %d\n", diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c index 8213e4b66c14..a12b353940d6 100644 --- a/arch/arm/mach-spear3xx/spear320_evb.c +++ b/arch/arm/mach-spear3xx/spear320_evb.c @@ -19,28 +19,28 @@ /* padmux devices to enable */ static struct pmx_dev *pmx_devs[] = { /* spear3xx specific devices */ - &pmx_i2c, - &pmx_ssp, - &pmx_mii, - &pmx_uart0, + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp, + &spear3xx_pmx_mii, + &spear3xx_pmx_uart0, /* spear320 specific devices */ - &pmx_fsmc, - &pmx_sdhci, - &pmx_i2s, - &pmx_uart1, - &pmx_uart2, - &pmx_can, - &pmx_pwm0, - &pmx_pwm1, - &pmx_pwm2, - &pmx_mii1, + &spear320_pmx_fsmc, + &spear320_pmx_sdhci, + &spear320_pmx_i2s, + &spear320_pmx_uart1, + &spear320_pmx_uart2, + &spear320_pmx_can, + &spear320_pmx_pwm0, + &spear320_pmx_pwm1, + &spear320_pmx_pwm2, + &spear320_pmx_mii1, }; static struct amba_device *amba_devs[] __initdata = { /* spear3xx specific devices */ - &gpio_device, - &uart_device, + &spear3xx_gpio_device, + &spear3xx_uart_device, /* spear320 specific devices */ }; @@ -55,13 +55,9 @@ static void __init spear320_evb_init(void) { unsigned int i; - /* padmux initialization, must be done before spear320_init */ - pmx_driver.mode = &auto_net_mii_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = ARRAY_SIZE(pmx_devs); - /* call spear320 machine init function */ - spear320_init(); + spear320_init(&spear320_auto_net_mii_mode, pmx_devs, + ARRAY_SIZE(pmx_devs)); /* Add Platform Devices */ platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index d3ba8ca1bc59..10af45da86a0 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -25,10 +25,10 @@ /* gpio device registration */ static struct pl061_platform_data gpio_plat_data = { .gpio_base = 0, - .irq_base = SPEAR_GPIO_INT_BASE, + .irq_base = SPEAR3XX_GPIO_INT_BASE, }; -struct amba_device gpio_device = { +struct amba_device spear3xx_gpio_device = { .dev = { .init_name = "gpio", .platform_data = &gpio_plat_data, @@ -38,11 +38,11 @@ struct amba_device gpio_device = { .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_BASIC_GPIO, NO_IRQ}, + .irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ}, }; /* uart device registration */ -struct amba_device uart_device = { +struct amba_device spear3xx_uart_device = { .dev = { .init_name = "uart", }, @@ -51,7 +51,7 @@ struct amba_device uart_device = { .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_UART, NO_IRQ}, + .irq = {SPEAR3XX_IRQ_UART, NO_IRQ}, }; /* Do spear3xx familiy common initialization part here */ @@ -97,215 +97,215 @@ void __init spear3xx_map_io(void) iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); /* This will initialize clock framework */ - clk_init(); + spear3xx_clk_init(); } /* pad multiplexing support */ /* devices */ -struct pmx_dev_mode pmx_firda_modes[] = { +static struct pmx_dev_mode pmx_firda_modes[] = { { .ids = 0xffffffff, .mask = PMX_FIRDA_MASK, }, }; -struct pmx_dev pmx_firda = { +struct pmx_dev spear3xx_pmx_firda = { .name = "firda", .modes = pmx_firda_modes, .mode_count = ARRAY_SIZE(pmx_firda_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_i2c_modes[] = { +static struct pmx_dev_mode pmx_i2c_modes[] = { { .ids = 0xffffffff, .mask = PMX_I2C_MASK, }, }; -struct pmx_dev pmx_i2c = { +struct pmx_dev spear3xx_pmx_i2c = { .name = "i2c", .modes = pmx_i2c_modes, .mode_count = ARRAY_SIZE(pmx_i2c_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_ssp_cs_modes[] = { +static struct pmx_dev_mode pmx_ssp_cs_modes[] = { { .ids = 0xffffffff, .mask = PMX_SSP_CS_MASK, }, }; -struct pmx_dev pmx_ssp_cs = { +struct pmx_dev spear3xx_pmx_ssp_cs = { .name = "ssp_chip_selects", .modes = pmx_ssp_cs_modes, .mode_count = ARRAY_SIZE(pmx_ssp_cs_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_ssp_modes[] = { +static struct pmx_dev_mode pmx_ssp_modes[] = { { .ids = 0xffffffff, .mask = PMX_SSP_MASK, }, }; -struct pmx_dev pmx_ssp = { +struct pmx_dev spear3xx_pmx_ssp = { .name = "ssp", .modes = pmx_ssp_modes, .mode_count = ARRAY_SIZE(pmx_ssp_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_mii_modes[] = { +static struct pmx_dev_mode pmx_mii_modes[] = { { .ids = 0xffffffff, .mask = PMX_MII_MASK, }, }; -struct pmx_dev pmx_mii = { +struct pmx_dev spear3xx_pmx_mii = { .name = "mii", .modes = pmx_mii_modes, .mode_count = ARRAY_SIZE(pmx_mii_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_gpio_pin0_modes[] = { +static struct pmx_dev_mode pmx_gpio_pin0_modes[] = { { .ids = 0xffffffff, .mask = PMX_GPIO_PIN0_MASK, }, }; -struct pmx_dev pmx_gpio_pin0 = { +struct pmx_dev spear3xx_pmx_gpio_pin0 = { .name = "gpio_pin0", .modes = pmx_gpio_pin0_modes, .mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_gpio_pin1_modes[] = { +static struct pmx_dev_mode pmx_gpio_pin1_modes[] = { { .ids = 0xffffffff, .mask = PMX_GPIO_PIN1_MASK, }, }; -struct pmx_dev pmx_gpio_pin1 = { +struct pmx_dev spear3xx_pmx_gpio_pin1 = { .name = "gpio_pin1", .modes = pmx_gpio_pin1_modes, .mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_gpio_pin2_modes[] = { +static struct pmx_dev_mode pmx_gpio_pin2_modes[] = { { .ids = 0xffffffff, .mask = PMX_GPIO_PIN2_MASK, }, }; -struct pmx_dev pmx_gpio_pin2 = { +struct pmx_dev spear3xx_pmx_gpio_pin2 = { .name = "gpio_pin2", .modes = pmx_gpio_pin2_modes, .mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_gpio_pin3_modes[] = { +static struct pmx_dev_mode pmx_gpio_pin3_modes[] = { { .ids = 0xffffffff, .mask = PMX_GPIO_PIN3_MASK, }, }; -struct pmx_dev pmx_gpio_pin3 = { +struct pmx_dev spear3xx_pmx_gpio_pin3 = { .name = "gpio_pin3", .modes = pmx_gpio_pin3_modes, .mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_gpio_pin4_modes[] = { +static struct pmx_dev_mode pmx_gpio_pin4_modes[] = { { .ids = 0xffffffff, .mask = PMX_GPIO_PIN4_MASK, }, }; -struct pmx_dev pmx_gpio_pin4 = { +struct pmx_dev spear3xx_pmx_gpio_pin4 = { .name = "gpio_pin4", .modes = pmx_gpio_pin4_modes, .mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_gpio_pin5_modes[] = { +static struct pmx_dev_mode pmx_gpio_pin5_modes[] = { { .ids = 0xffffffff, .mask = PMX_GPIO_PIN5_MASK, }, }; -struct pmx_dev pmx_gpio_pin5 = { +struct pmx_dev spear3xx_pmx_gpio_pin5 = { .name = "gpio_pin5", .modes = pmx_gpio_pin5_modes, .mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_uart0_modem_modes[] = { +static struct pmx_dev_mode pmx_uart0_modem_modes[] = { { .ids = 0xffffffff, .mask = PMX_UART0_MODEM_MASK, }, }; -struct pmx_dev pmx_uart0_modem = { +struct pmx_dev spear3xx_pmx_uart0_modem = { .name = "uart0_modem", .modes = pmx_uart0_modem_modes, .mode_count = ARRAY_SIZE(pmx_uart0_modem_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_uart0_modes[] = { +static struct pmx_dev_mode pmx_uart0_modes[] = { { .ids = 0xffffffff, .mask = PMX_UART0_MASK, }, }; -struct pmx_dev pmx_uart0 = { +struct pmx_dev spear3xx_pmx_uart0 = { .name = "uart0", .modes = pmx_uart0_modes, .mode_count = ARRAY_SIZE(pmx_uart0_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_timer_3_4_modes[] = { +static struct pmx_dev_mode pmx_timer_3_4_modes[] = { { .ids = 0xffffffff, .mask = PMX_TIMER_3_4_MASK, }, }; -struct pmx_dev pmx_timer_3_4 = { +struct pmx_dev spear3xx_pmx_timer_3_4 = { .name = "timer_3_4", .modes = pmx_timer_3_4_modes, .mode_count = ARRAY_SIZE(pmx_timer_3_4_modes), .enb_on_reset = 0, }; -struct pmx_dev_mode pmx_timer_1_2_modes[] = { +static struct pmx_dev_mode pmx_timer_1_2_modes[] = { { .ids = 0xffffffff, .mask = PMX_TIMER_1_2_MASK, }, }; -struct pmx_dev pmx_timer_1_2 = { +struct pmx_dev spear3xx_pmx_timer_1_2 = { .name = "timer_1_2", .modes = pmx_timer_1_2_modes, .mode_count = ARRAY_SIZE(pmx_timer_1_2_modes), @@ -314,210 +314,210 @@ struct pmx_dev pmx_timer_1_2 = { #if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) /* plgpios devices */ -struct pmx_dev_mode pmx_plgpio_0_1_modes[] = { +static struct pmx_dev_mode pmx_plgpio_0_1_modes[] = { { .ids = 0x00, .mask = PMX_FIRDA_MASK, }, }; -struct pmx_dev pmx_plgpio_0_1 = { +struct pmx_dev spear3xx_pmx_plgpio_0_1 = { .name = "plgpio 0 and 1", .modes = pmx_plgpio_0_1_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_2_3_modes[] = { +static struct pmx_dev_mode pmx_plgpio_2_3_modes[] = { { .ids = 0x00, .mask = PMX_UART0_MASK, }, }; -struct pmx_dev pmx_plgpio_2_3 = { +struct pmx_dev spear3xx_pmx_plgpio_2_3 = { .name = "plgpio 2 and 3", .modes = pmx_plgpio_2_3_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_4_5_modes[] = { +static struct pmx_dev_mode pmx_plgpio_4_5_modes[] = { { .ids = 0x00, .mask = PMX_I2C_MASK, }, }; -struct pmx_dev pmx_plgpio_4_5 = { +struct pmx_dev spear3xx_pmx_plgpio_4_5 = { .name = "plgpio 4 and 5", .modes = pmx_plgpio_4_5_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_6_9_modes[] = { +static struct pmx_dev_mode pmx_plgpio_6_9_modes[] = { { .ids = 0x00, .mask = PMX_SSP_MASK, }, }; -struct pmx_dev pmx_plgpio_6_9 = { +struct pmx_dev spear3xx_pmx_plgpio_6_9 = { .name = "plgpio 6 to 9", .modes = pmx_plgpio_6_9_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_10_27_modes[] = { +static struct pmx_dev_mode pmx_plgpio_10_27_modes[] = { { .ids = 0x00, .mask = PMX_MII_MASK, }, }; -struct pmx_dev pmx_plgpio_10_27 = { +struct pmx_dev spear3xx_pmx_plgpio_10_27 = { .name = "plgpio 10 to 27", .modes = pmx_plgpio_10_27_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_28_modes[] = { +static struct pmx_dev_mode pmx_plgpio_28_modes[] = { { .ids = 0x00, .mask = PMX_GPIO_PIN0_MASK, }, }; -struct pmx_dev pmx_plgpio_28 = { +struct pmx_dev spear3xx_pmx_plgpio_28 = { .name = "plgpio 28", .modes = pmx_plgpio_28_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_28_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_29_modes[] = { +static struct pmx_dev_mode pmx_plgpio_29_modes[] = { { .ids = 0x00, .mask = PMX_GPIO_PIN1_MASK, }, }; -struct pmx_dev pmx_plgpio_29 = { +struct pmx_dev spear3xx_pmx_plgpio_29 = { .name = "plgpio 29", .modes = pmx_plgpio_29_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_29_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_30_modes[] = { +static struct pmx_dev_mode pmx_plgpio_30_modes[] = { { .ids = 0x00, .mask = PMX_GPIO_PIN2_MASK, }, }; -struct pmx_dev pmx_plgpio_30 = { +struct pmx_dev spear3xx_pmx_plgpio_30 = { .name = "plgpio 30", .modes = pmx_plgpio_30_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_30_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_31_modes[] = { +static struct pmx_dev_mode pmx_plgpio_31_modes[] = { { .ids = 0x00, .mask = PMX_GPIO_PIN3_MASK, }, }; -struct pmx_dev pmx_plgpio_31 = { +struct pmx_dev spear3xx_pmx_plgpio_31 = { .name = "plgpio 31", .modes = pmx_plgpio_31_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_31_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_32_modes[] = { +static struct pmx_dev_mode pmx_plgpio_32_modes[] = { { .ids = 0x00, .mask = PMX_GPIO_PIN4_MASK, }, }; -struct pmx_dev pmx_plgpio_32 = { +struct pmx_dev spear3xx_pmx_plgpio_32 = { .name = "plgpio 32", .modes = pmx_plgpio_32_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_32_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_33_modes[] = { +static struct pmx_dev_mode pmx_plgpio_33_modes[] = { { .ids = 0x00, .mask = PMX_GPIO_PIN5_MASK, }, }; -struct pmx_dev pmx_plgpio_33 = { +struct pmx_dev spear3xx_pmx_plgpio_33 = { .name = "plgpio 33", .modes = pmx_plgpio_33_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_33_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_34_36_modes[] = { +static struct pmx_dev_mode pmx_plgpio_34_36_modes[] = { { .ids = 0x00, .mask = PMX_SSP_CS_MASK, }, }; -struct pmx_dev pmx_plgpio_34_36 = { +struct pmx_dev spear3xx_pmx_plgpio_34_36 = { .name = "plgpio 34 to 36", .modes = pmx_plgpio_34_36_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_37_42_modes[] = { +static struct pmx_dev_mode pmx_plgpio_37_42_modes[] = { { .ids = 0x00, .mask = PMX_UART0_MODEM_MASK, }, }; -struct pmx_dev pmx_plgpio_37_42 = { +struct pmx_dev spear3xx_pmx_plgpio_37_42 = { .name = "plgpio 37 to 42", .modes = pmx_plgpio_37_42_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = { +static struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = { { .ids = 0x00, .mask = PMX_TIMER_1_2_MASK, }, }; -struct pmx_dev pmx_plgpio_43_44_47_48 = { +struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48 = { .name = "plgpio 43, 44, 47 and 48", .modes = pmx_plgpio_43_44_47_48_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes), .enb_on_reset = 1, }; -struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = { +static struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = { { .ids = 0x00, .mask = PMX_TIMER_3_4_MASK, }, }; -struct pmx_dev pmx_plgpio_45_46_49_50 = { +struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = { .name = "plgpio 45, 46, 49 and 50", .modes = pmx_plgpio_45_46_49_50_modes, .mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes), diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig index bddba034f862..ff4ae5ba00f1 100644 --- a/arch/arm/mach-spear6xx/Kconfig +++ b/arch/arm/mach-spear6xx/Kconfig @@ -4,17 +4,18 @@ if ARCH_SPEAR6XX -choice - prompt "SPEAr6XX Family" - default MACH_SPEAR600 +menu "SPEAr6xx Implementations" +config BOARD_SPEAR600_EVB + bool "SPEAr600 Evaluation Board" + select MACH_SPEAR600 + help + Supports ST SPEAr600 Evaluation Board + +endmenu config MACH_SPEAR600 bool "SPEAr600" help Supports ST SPEAr600 Machine -endchoice - -# Adding SPEAr6XX machine specific configuration files -source "arch/arm/mach-spear6xx/Kconfig600" endif #ARCH_SPEAR6XX diff --git a/arch/arm/mach-spear6xx/Kconfig600 b/arch/arm/mach-spear6xx/Kconfig600 deleted file mode 100644 index 9e19f65eb78e..000000000000 --- a/arch/arm/mach-spear6xx/Kconfig600 +++ /dev/null @@ -1,17 +0,0 @@ -# -# SPEAr600 machine configuration file -# - -if MACH_SPEAR600 - -choice - prompt "SPEAr600 Boards" - default BOARD_SPEAR600_EVB - -config BOARD_SPEAR600_EVB - bool "SPEAr600 Evaluation Board" - help - Supports ST SPEAr600 Evaluation Board -endchoice - -endif #MACH_SPEAR600 diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c index 88b748b5be80..ac70e0d88fef 100644 --- a/arch/arm/mach-spear6xx/clock.c +++ b/arch/arm/mach-spear6xx/clock.c @@ -671,12 +671,12 @@ static struct clk_lookup spear_clk_lookups[] = { { .dev_id = "gpio2", .clk = &gpio2_clk}, }; -void __init clk_init(void) +void __init spear6xx_clk_init(void) { int i; for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) clk_register(&spear_clk_lookups[i]); - recalc_root_clocks(); + clk_init(); } diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h index 94cf4a648b57..183f0238c5e2 100644 --- a/arch/arm/mach-spear6xx/include/mach/generic.h +++ b/arch/arm/mach-spear6xx/include/mach/generic.h @@ -39,7 +39,7 @@ void __init spear6xx_map_io(void); void __init spear6xx_init_irq(void); void __init spear6xx_init(void); void __init spear600_init(void); -void __init clk_init(void); +void __init spear6xx_clk_init(void); /* Add spear600 machine device structure declarations here */ diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 981812961ac7..e0f6628c8b2c 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -148,7 +148,7 @@ void __init spear6xx_map_io(void) iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc)); /* This will initialize clock framework */ - clk_init(); + spear6xx_clk_init(); } static void __init spear6xx_timer_init(void) diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 2b269c955524..1a8d4aa821be 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -253,8 +253,8 @@ void __sync_icache_dcache(pte_t pteval) if (!test_and_set_bit(PG_dcache_clean, &page->flags)) __flush_dcache_page(mapping, page); - /* pte_exec() already checked above for non-aliasing VIPT cache */ - if (cache_is_vipt_nonaliasing() || pte_exec(pteval)) + + if (pte_exec(pteval)) __flush_icache_all(); } #endif @@ -275,7 +275,8 @@ void __sync_icache_dcache(pte_t pteval) * kernel cache lines for later. Otherwise, we assume we have * aliasing mappings. * - * Note that we disable the lazy flush for SMP. + * Note that we disable the lazy flush for SMP configurations where + * the cache maintenance operations are not automatically broadcasted. */ void flush_dcache_page(struct page *page) { diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c index bdbd7ec9cb6b..6fa474cb398e 100644 --- a/arch/arm/plat-spear/clock.c +++ b/arch/arm/plat-spear/clock.c @@ -903,6 +903,11 @@ void recalc_root_clocks(void) spin_unlock_irqrestore(&clocks_lock, flags); } +void __init clk_init(void) +{ + recalc_root_clocks(); +} + #ifdef CONFIG_DEBUG_FS /* * debugfs support to trace clock tree hierarchy and attributes diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h index fcc0d0ad4a1f..0062bafef12d 100644 --- a/arch/arm/plat-spear/include/plat/clock.h +++ b/arch/arm/plat-spear/include/plat/clock.h @@ -224,6 +224,7 @@ struct clcd_rate_tbl { }; /* platform specific clock functions */ +void __init clk_init(void); void clk_register(struct clk_lookup *cl); void recalc_root_clocks(void); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 7ca41f0a09b1..3b3776d0a1a7 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -17,7 +17,7 @@ # XXX: the last 12 months. If your entry is missing please email rmk at # XXX: <linux@arm.linux.org.uk> # -# Last update: Sun Mar 20 18:06:11 2011 +# Last update: Sat May 7 08:48:24 2011 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -377,6 +377,8 @@ davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157 at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159 omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160 magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162 +btmavb101 MACH_BTMAVB101 BTMAVB101 2172 +btmawb101 MACH_BTMAWB101 BTMAWB101 2173 omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178 anw6410 MACH_ANW6410 ANW6410 2183 imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187 @@ -400,6 +402,7 @@ d2net MACH_D2NET D2NET 2282 bigdisk MACH_BIGDISK BIGDISK 2283 at91sam9g20ek_2mmc MACH_AT91SAM9G20EK_2MMC AT91SAM9G20EK_2MMC 2288 bcmring MACH_BCMRING BCMRING 2289 +dp6xx MACH_DP6XX DP6XX 2302 mahimahi MACH_MAHIMAHI MAHIMAHI 2304 smdk6442 MACH_SMDK6442 SMDK6442 2324 openrd_base MACH_OPENRD_BASE OPENRD_BASE 2325 @@ -424,6 +427,7 @@ smdkv210 MACH_SMDKV210 SMDKV210 2456 omap_zoom3 MACH_OMAP_ZOOM3 OMAP_ZOOM3 2464 omap_3630sdp MACH_OMAP_3630SDP OMAP_3630SDP 2465 smartq7 MACH_SMARTQ7 SMARTQ7 2479 +watson_efm_plugin MACH_WATSON_EFM_PLUGIN WATSON_EFM_PLUGIN 2491 g4evm MACH_G4EVM G4EVM 2493 omapl138_hawkboard MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD 2495 ts41x MACH_TS41X TS41X 2502 @@ -433,6 +437,8 @@ mx28evk MACH_MX28EVK MX28EVK 2531 smartq5 MACH_SMARTQ5 SMARTQ5 2534 davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548 mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 +riot_bei2 MACH_RIOT_BEI2 RIOT_BEI2 2576 +riot_x37 MACH_RIOT_X37 RIOT_X37 2578 capc7117 MACH_CAPC7117 CAPC7117 2612 icontrol MACH_ICONTROL ICONTROL 2624 qsd8x50a_st1_5 MACH_QSD8X50A_ST1_5 QSD8X50A_ST1_5 2627 @@ -445,6 +451,7 @@ spear320 MACH_SPEAR320 SPEAR320 2661 aquila MACH_AQUILA AQUILA 2676 sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678 msm7x30_surf MACH_MSM7X30_SURF MSM7X30_SURF 2679 +ea2478devkit MACH_EA2478DEVKIT EA2478DEVKIT 2683 terastation_wxl MACH_TERASTATION_WXL TERASTATION_WXL 2697 msm7x25_surf MACH_MSM7X25_SURF MSM7X25_SURF 2703 msm7x25_ffa MACH_MSM7X25_FFA MSM7X25_FFA 2704 @@ -463,75 +470,16 @@ wbd222 MACH_WBD222 WBD222 2753 msm8x60_surf MACH_MSM8X60_SURF MSM8X60_SURF 2755 msm8x60_sim MACH_MSM8X60_SIM MSM8X60_SIM 2756 tcc8000_sdk MACH_TCC8000_SDK TCC8000_SDK 2758 -ap420 MACH_AP420 AP420 2765 -davinci_dm365_fc MACH_DAVINCI_DM365_FC DAVINCI_DM365_FC 2767 -msm8x55_surf MACH_MSM8X55_SURF MSM8X55_SURF 2768 -msm8x55_ffa MACH_MSM8X55_FFA MSM8X55_FFA 2769 -esl_vamana MACH_ESL_VAMANA ESL_VAMANA 2770 -sbc35 MACH_SBC35 SBC35 2771 -mpx6446 MACH_MPX6446 MPX6446 2772 -oreo_controller MACH_OREO_CONTROLLER OREO_CONTROLLER 2773 -kopin_models MACH_KOPIN_MODELS KOPIN_MODELS 2774 -ttc_vision2 MACH_TTC_VISION2 TTC_VISION2 2775 +nanos MACH_NANOS NANOS 2759 +stamp9g45 MACH_STAMP9G45 STAMP9G45 2761 cns3420vb MACH_CNS3420VB CNS3420VB 2776 -olympus MACH_OLYMPUS OLYMPUS 2778 -vortex MACH_VORTEX VORTEX 2779 -s5pc200 MACH_S5PC200 S5PC200 2780 -ecucore_9263 MACH_ECUCORE_9263 ECUCORE_9263 2781 -smdkc200 MACH_SMDKC200 SMDKC200 2782 -emsiso_sx27 MACH_EMSISO_SX27 EMSISO_SX27 2783 -apx_som9g45_ek MACH_APX_SOM9G45_EK APX_SOM9G45_EK 2784 -songshan MACH_SONGSHAN SONGSHAN 2785 -tianshan MACH_TIANSHAN TIANSHAN 2786 -vpx500 MACH_VPX500 VPX500 2787 -am3517sam MACH_AM3517SAM AM3517SAM 2788 -skat91_sim508 MACH_SKAT91_SIM508 SKAT91_SIM508 2789 -skat91_s3e MACH_SKAT91_S3E SKAT91_S3E 2790 omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791 -df7220 MACH_DF7220 DF7220 2792 -nemini MACH_NEMINI NEMINI 2793 -t8200 MACH_T8200 T8200 2794 -apf51 MACH_APF51 APF51 2795 -dr_rc_unit MACH_DR_RC_UNIT DR_RC_UNIT 2796 -bordeaux MACH_BORDEAUX BORDEAUX 2797 -catania_b MACH_CATANIA_B CATANIA_B 2798 -mx51_ocean MACH_MX51_OCEAN MX51_OCEAN 2799 ti8168evm MACH_TI8168EVM TI8168EVM 2800 -neocoreomap MACH_NEOCOREOMAP NEOCOREOMAP 2801 -withings_wbp MACH_WITHINGS_WBP WITHINGS_WBP 2802 -dbps MACH_DBPS DBPS 2803 -pcbfp0001 MACH_PCBFP0001 PCBFP0001 2805 -speedy MACH_SPEEDY SPEEDY 2806 -chrysaor MACH_CHRYSAOR CHRYSAOR 2807 -tango MACH_TANGO TANGO 2808 -synology_dsx11 MACH_SYNOLOGY_DSX11 SYNOLOGY_DSX11 2809 -hanlin_v3ext MACH_HANLIN_V3EXT HANLIN_V3EXT 2810 -hanlin_v5 MACH_HANLIN_V5 HANLIN_V5 2811 -hanlin_v3plus MACH_HANLIN_V3PLUS HANLIN_V3PLUS 2812 -iriver_story MACH_IRIVER_STORY IRIVER_STORY 2813 -irex_iliad MACH_IREX_ILIAD IREX_ILIAD 2814 -irex_dr1000 MACH_IREX_DR1000 IREX_DR1000 2815 teton_bga MACH_TETON_BGA TETON_BGA 2816 -snapper9g45 MACH_SNAPPER9G45 SNAPPER9G45 2817 -tam3517 MACH_TAM3517 TAM3517 2818 -pdc100 MACH_PDC100 PDC100 2819 eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25 EUKREA_CPUIMX25 2820 eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35 EUKREA_CPUIMX35 2821 eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822 eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823 -p565 MACH_P565 P565 2824 -acer_a4 MACH_ACER_A4 ACER_A4 2825 -davinci_dm368_bip MACH_DAVINCI_DM368_BIP DAVINCI_DM368_BIP 2826 -eshare MACH_ESHARE ESHARE 2827 -wlbargn MACH_WLBARGN WLBARGN 2829 -bm170 MACH_BM170 BM170 2830 -netspace_mini_v2 MACH_NETSPACE_MINI_V2 NETSPACE_MINI_V2 2831 -netspace_plug_v2 MACH_NETSPACE_PLUG_V2 NETSPACE_PLUG_V2 2832 -siemens_l1 MACH_SIEMENS_L1 SIEMENS_L1 2833 -elv_lcu1 MACH_ELV_LCU1 ELV_LCU1 2834 -mcu1 MACH_MCU1 MCU1 2835 -omap3_tao3530 MACH_OMAP3_TAO3530 OMAP3_TAO3530 2836 -omap3_pcutouch MACH_OMAP3_PCUTOUCH OMAP3_PCUTOUCH 2837 smdkc210 MACH_SMDKC210 SMDKC210 2838 omap3_braillo MACH_OMAP3_BRAILLO OMAP3_BRAILLO 2839 spyplug MACH_SPYPLUG SPYPLUG 2840 @@ -973,9 +921,7 @@ isc3 MACH_ISC3 ISC3 3291 rascal MACH_RASCAL RASCAL 3292 hrefv60 MACH_HREFV60 HREFV60 3293 tpt_2_0 MACH_TPT_2_0 TPT_2_0 3294 -pyramid_td MACH_PYRAMID_TD PYRAMID_TD 3295 splendor MACH_SPLENDOR SPLENDOR 3296 -guf_planet MACH_GUF_PLANET GUF_PLANET 3297 msm8x60_qt MACH_MSM8X60_QT MSM8X60_QT 3298 htc_hd_mini MACH_HTC_HD_MINI HTC_HD_MINI 3299 athene MACH_ATHENE ATHENE 3300 @@ -1099,3 +1045,71 @@ ecuv5 MACH_ECUV5 ECUV5 3421 hsgx6d MACH_HSGX6D HSGX6D 3422 dawad7 MACH_DAWAD7 DAWAD7 3423 sam9repeater MACH_SAM9REPEATER SAM9REPEATER 3424 +gt_i5700 MACH_GT_I5700 GT_I5700 3425 +ctera_plug_c2 MACH_CTERA_PLUG_C2 CTERA_PLUG_C2 3426 +marvelct MACH_MARVELCT MARVELCT 3427 +ag11005 MACH_AG11005 AG11005 3428 +vangogh MACH_VANGOGH VANGOGH 3430 +matrix505 MACH_MATRIX505 MATRIX505 3431 +oce_nigma MACH_OCE_NIGMA OCE_NIGMA 3432 +t55 MACH_T55 T55 3433 +bio3k MACH_BIO3K BIO3K 3434 +expressct MACH_EXPRESSCT EXPRESSCT 3435 +cardhu MACH_CARDHU CARDHU 3436 +aruba MACH_ARUBA ARUBA 3437 +bonaire MACH_BONAIRE BONAIRE 3438 +nuc700evb MACH_NUC700EVB NUC700EVB 3439 +nuc710evb MACH_NUC710EVB NUC710EVB 3440 +nuc740evb MACH_NUC740EVB NUC740EVB 3441 +nuc745evb MACH_NUC745EVB NUC745EVB 3442 +transcede MACH_TRANSCEDE TRANSCEDE 3443 +mora MACH_MORA MORA 3444 +nda_evm MACH_NDA_EVM NDA_EVM 3445 +timu MACH_TIMU TIMU 3446 +expressh MACH_EXPRESSH EXPRESSH 3447 +veridis_a300 MACH_VERIDIS_A300 VERIDIS_A300 3448 +dm368_leopard MACH_DM368_LEOPARD DM368_LEOPARD 3449 +omap_mcop MACH_OMAP_MCOP OMAP_MCOP 3450 +tritip MACH_TRITIP TRITIP 3451 +sm1k MACH_SM1K SM1K 3452 +monch MACH_MONCH MONCH 3453 +curacao MACH_CURACAO CURACAO 3454 +origen MACH_ORIGEN ORIGEN 3455 +epc10 MACH_EPC10 EPC10 3456 +sgh_i740 MACH_SGH_I740 SGH_I740 3457 +tuna MACH_TUNA TUNA 3458 +mx51_tulip MACH_MX51_TULIP MX51_TULIP 3459 +mx51_aster7 MACH_MX51_ASTER7 MX51_ASTER7 3460 +acro37xbrd MACH_ACRO37XBRD ACRO37XBRD 3461 +elke MACH_ELKE ELKE 3462 +sbc6000x MACH_SBC6000X SBC6000X 3463 +r1801e MACH_R1801E R1801E 3464 +h1600 MACH_H1600 H1600 3465 +mini210 MACH_MINI210 MINI210 3466 +mini8168 MACH_MINI8168 MINI8168 3467 +pc7308 MACH_PC7308 PC7308 3468 +kmm2m01 MACH_KMM2M01 KMM2M01 3470 +mx51erebus MACH_MX51EREBUS MX51EREBUS 3471 +wm8650refboard MACH_WM8650REFBOARD WM8650REFBOARD 3472 +tuxrail MACH_TUXRAIL TUXRAIL 3473 +arthur MACH_ARTHUR ARTHUR 3474 +doorboy MACH_DOORBOY DOORBOY 3475 +xarina MACH_XARINA XARINA 3476 +roverx7 MACH_ROVERX7 ROVERX7 3477 +sdvr MACH_SDVR SDVR 3478 +acer_maya MACH_ACER_MAYA ACER_MAYA 3479 +pico MACH_PICO PICO 3480 +cwmx233 MACH_CWMX233 CWMX233 3481 +cwam1808 MACH_CWAM1808 CWAM1808 3482 +cwdm365 MACH_CWDM365 CWDM365 3483 +mx51_moray MACH_MX51_MORAY MX51_MORAY 3484 +thales_cbc MACH_THALES_CBC THALES_CBC 3485 +bluepoint MACH_BLUEPOINT BLUEPOINT 3486 +dir665 MACH_DIR665 DIR665 3487 +acmerover1 MACH_ACMEROVER1 ACMEROVER1 3488 +shooter_ct MACH_SHOOTER_CT SHOOTER_CT 3489 +bliss MACH_BLISS BLISS 3490 +blissc MACH_BLISSC BLISSC 3491 +thales_adc MACH_THALES_ADC THALES_ADC 3492 +ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493 +atdgp318 MACH_ATDGP318 ATDGP318 3494 diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index b4a7e4fba90f..4941e06fe2e1 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -77,7 +77,7 @@ static struct variant_data variant_arm_extended_fifo = { static struct variant_data variant_u300 = { .fifosize = 16 * 4, .fifohalfsize = 8 * 4, - .clkreg_enable = 1 << 13, /* HWFCEN */ + .clkreg_enable = MCI_ST_U300_HWFCEN, .datalength_bits = 16, .sdio = true, }; @@ -86,7 +86,7 @@ static struct variant_data variant_ux500 = { .fifosize = 30 * 4, .fifohalfsize = 8 * 4, .clkreg = MCI_CLK_ENABLE, - .clkreg_enable = 1 << 14, /* HWFCEN */ + .clkreg_enable = MCI_ST_UX500_HWFCEN, .datalength_bits = 24, .sdio = true, .st_clkdiv = true, @@ -103,6 +103,8 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) if (desired) { if (desired >= host->mclk) { clk = MCI_CLK_BYPASS; + if (variant->st_clkdiv) + clk |= MCI_ST_UX500_NEG_EDGE; host->cclk = host->mclk; } else if (variant->st_clkdiv) { /* diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index ec9a7bc6d0df..bb32e21c09db 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -11,23 +11,33 @@ #define MCI_PWR_OFF 0x00 #define MCI_PWR_UP 0x02 #define MCI_PWR_ON 0x03 -#define MCI_DATA2DIREN (1 << 2) -#define MCI_CMDDIREN (1 << 3) -#define MCI_DATA0DIREN (1 << 4) -#define MCI_DATA31DIREN (1 << 5) #define MCI_OD (1 << 6) #define MCI_ROD (1 << 7) -/* The ST Micro version does not have ROD */ -#define MCI_FBCLKEN (1 << 7) -#define MCI_DATA74DIREN (1 << 8) +/* + * The ST Micro version does not have ROD and reuse the voltage registers + * for direction settings + */ +#define MCI_ST_DATA2DIREN (1 << 2) +#define MCI_ST_CMDDIREN (1 << 3) +#define MCI_ST_DATA0DIREN (1 << 4) +#define MCI_ST_DATA31DIREN (1 << 5) +#define MCI_ST_FBCLKEN (1 << 7) +#define MCI_ST_DATA74DIREN (1 << 8) #define MMCICLOCK 0x004 #define MCI_CLK_ENABLE (1 << 8) #define MCI_CLK_PWRSAVE (1 << 9) #define MCI_CLK_BYPASS (1 << 10) #define MCI_4BIT_BUS (1 << 11) -/* 8bit wide buses supported in ST Micro versions */ +/* + * 8bit wide buses, hardware flow contronl, negative edges and clock inversion + * supported in ST Micro U300 and Ux500 versions + */ #define MCI_ST_8BIT_BUS (1 << 12) +#define MCI_ST_U300_HWFCEN (1 << 13) +#define MCI_ST_UX500_NEG_EDGE (1 << 13) +#define MCI_ST_UX500_HWFCEN (1 << 14) +#define MCI_ST_UX500_CLK_INV (1 << 15) #define MMCIARGUMENT 0x008 #define MMCICOMMAND 0x00c @@ -88,8 +98,9 @@ #define MCI_RXFIFOEMPTY (1 << 19) #define MCI_TXDATAAVLBL (1 << 20) #define MCI_RXDATAAVLBL (1 << 21) -#define MCI_SDIOIT (1 << 22) -#define MCI_CEATAEND (1 << 23) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOIT (1 << 22) +#define MCI_ST_CEATAEND (1 << 23) #define MMCICLEAR 0x038 #define MCI_CMDCRCFAILCLR (1 << 0) @@ -102,8 +113,9 @@ #define MCI_CMDSENTCLR (1 << 7) #define MCI_DATAENDCLR (1 << 8) #define MCI_DATABLOCKENDCLR (1 << 10) -#define MCI_SDIOITC (1 << 22) -#define MCI_CEATAENDC (1 << 23) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOITC (1 << 22) +#define MCI_ST_CEATAENDC (1 << 23) #define MMCIMASK0 0x03c #define MCI_CMDCRCFAILMASK (1 << 0) @@ -127,8 +139,9 @@ #define MCI_RXFIFOEMPTYMASK (1 << 19) #define MCI_TXDATAAVLBLMASK (1 << 20) #define MCI_RXDATAAVLBLMASK (1 << 21) -#define MCI_SDIOITMASK (1 << 22) -#define MCI_CEATAENDMASK (1 << 23) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOITMASK (1 << 22) +#define MCI_ST_CEATAENDMASK (1 << 23) #define MMCIMASK1 0x040 #define MMCIFIFOCNT 0x048 diff --git a/include/linux/elf.h b/include/linux/elf.h index 4d608014753a..110821cb6ea5 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -395,6 +395,7 @@ typedef struct elf64_shdr { #define NT_S390_CTRS 0x304 /* s390 control registers */ #define NT_S390_PREFIX 0x305 /* s390 prefix register */ #define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */ +#define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */ /* Note header in a PT_NOTE section */ |
