diff options
| -rw-r--r-- | Documentation/powerpc/dts-bindings/gpio/led.txt | 46 | ||||
| -rw-r--r-- | drivers/leds/Kconfig | 21 | ||||
| -rw-r--r-- | drivers/leds/leds-gpio.c | 205 |
3 files changed, 219 insertions, 53 deletions
diff --git a/Documentation/powerpc/dts-bindings/gpio/led.txt b/Documentation/powerpc/dts-bindings/gpio/led.txt index ff51f4c0fa9d..4fe14deedc0a 100644 --- a/Documentation/powerpc/dts-bindings/gpio/led.txt +++ b/Documentation/powerpc/dts-bindings/gpio/led.txt @@ -1,15 +1,43 @@ -LED connected to GPIO +LEDs connected to GPIO lines Required properties: -- compatible : should be "gpio-led". -- label : (optional) the label for this LED. If omitted, the label is +- compatible : should be "gpio-leds". + +Each LED is represented as a sub-node of the gpio-leds device. Each +node's name represents the name of the corresponding LED. + +LED sub-node properties: +- gpios : Should specify the LED's GPIO, see "Specifying GPIO information + for devices" in Documentation/powerpc/booting-without-of.txt. Active + low LEDs should be indicated using flags in the GPIO specifier. +- label : (optional) The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). -- gpios : should specify LED GPIO. +- linux,default-trigger : (optional) This parameter, if present, is a + string defining the trigger assigned to the LED. Current triggers are: + "backlight" - LED will act as a back-light, controlled by the framebuffer + system + "default-on" - LED will turn on + "heartbeat" - LED "double" flashes at a load average based rate + "ide-disk" - LED indicates disk activity + "timer" - LED flashes at a fixed, configurable rate -Example: +Examples: -led@0 { - compatible = "gpio-led"; - label = "hdd"; - gpios = <&mcu_pio 0 1>; +leds { + compatible = "gpio-leds"; + hdd { + label = "IDE Activity"; + gpios = <&mcu_pio 0 1>; /* Active low */ + linux,default-trigger = "ide-disk"; + }; }; + +run-control { + compatible = "gpio-leds"; + red { + gpios = <&mpc8572 6 0>; + }; + green { + gpios = <&mpc8572 7 0>; + }; +} diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index d9db17624f12..90d39e5803cd 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -117,7 +117,26 @@ config LEDS_GPIO help This option enables support for the LEDs connected to GPIO outputs. To be useful the particular board must have LEDs - and they must be connected to the GPIO lines. + and they must be connected to the GPIO lines. The LEDs must be + defined as platform devices and/or OpenFirmware platform devices. + The code to use these bindings can be selected below. + +config LEDS_GPIO_PLATFORM + bool "Platform device bindings for GPIO LEDs" + depends on LEDS_GPIO + default y + help + Let the leds-gpio driver drive LEDs which have been defined as + platform devices. If you don't know what this means, say yes. + +config LEDS_GPIO_OF + bool "OpenFirmware platform device bindings for GPIO LEDs" + depends on LEDS_GPIO && OF_DEVICE + default y + help + Let the leds-gpio driver drive LEDs which have been defined as + of_platform devices. For instance, LEDs which are listed in a "dts" + file. config LEDS_CLEVO_MAIL tristate "Mail LED on Clevo notebook (EXPERIMENTAL)" diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index 2e3df08b649b..f8bcf98fc15c 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -3,6 +3,7 @@ * * Copyright (C) 2007 8D Technologies inc. * Raphael Assenat <raph@8d.com> + * Copyright (C) 2008 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -71,11 +72,57 @@ static int gpio_blink_set(struct led_classdev *led_cdev, return led_dat->platform_gpio_blink_set(led_dat->gpio, delay_on, delay_off); } +static int __devinit create_gpio_led(const struct gpio_led *template, + struct gpio_led_data *led_dat, struct device *parent, + int (*blink_set)(unsigned, unsigned long *, unsigned long *)) +{ + int ret; + + ret = gpio_request(template->gpio, template->name); + if (ret < 0) + return ret; + + led_dat->cdev.name = template->name; + led_dat->cdev.default_trigger = template->default_trigger; + led_dat->gpio = template->gpio; + led_dat->can_sleep = gpio_cansleep(template->gpio); + led_dat->active_low = template->active_low; + if (blink_set) { + led_dat->platform_gpio_blink_set = blink_set; + led_dat->cdev.blink_set = gpio_blink_set; + } + led_dat->cdev.brightness_set = gpio_led_set; + led_dat->cdev.brightness = LED_OFF; + led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; + + ret = gpio_direction_output(led_dat->gpio, led_dat->active_low); + if (ret < 0) + goto err; + + INIT_WORK(&led_dat->work, gpio_led_work); + + ret = led_classdev_register(parent, &led_dat->cdev); + if (ret < 0) + goto err; + + return 0; +err: + gpio_free(led_dat->gpio); + return ret; +} + +static void delete_gpio_led(struct gpio_led_data *led) +{ + led_classdev_unregister(&led->cdev); + cancel_work_sync(&led->work); + gpio_free(led->gpio); +} + +#ifdef CONFIG_LEDS_GPIO_PLATFORM static int gpio_led_probe(struct platform_device *pdev) { struct gpio_led_platform_data *pdata = pdev->dev.platform_data; - struct gpio_led *cur_led; - struct gpio_led_data *leds_data, *led_dat; + struct gpio_led_data *leds_data; int i, ret = 0; if (!pdata) @@ -87,35 +134,10 @@ static int gpio_led_probe(struct platform_device *pdev) return -ENOMEM; for (i = 0; i < pdata->num_leds; i++) { - cur_led = &pdata->leds[i]; - led_dat = &leds_data[i]; - - ret = gpio_request(cur_led->gpio, cur_led->name); + ret = create_gpio_led(&pdata->leds[i], &leds_data[i], + &pdev->dev, pdata->gpio_blink_set); if (ret < 0) goto err; - - led_dat->cdev.name = cur_led->name; - led_dat->cdev.default_trigger = cur_led->default_trigger; - led_dat->gpio = cur_led->gpio; - led_dat->can_sleep = gpio_cansleep(cur_led->gpio); - led_dat->active_low = cur_led->active_low; - if (pdata->gpio_blink_set) { - led_dat->platform_gpio_blink_set = pdata->gpio_blink_set; - led_dat->cdev.blink_set = gpio_blink_set; - } - led_dat->cdev.brightness_set = gpio_led_set; - led_dat->cdev.brightness = LED_OFF; - led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; - - gpio_direction_output(led_dat->gpio, led_dat->active_low); - - INIT_WORK(&led_dat->work, gpio_led_work); - - ret = led_classdev_register(&pdev->dev, &led_dat->cdev); - if (ret < 0) { - gpio_free(led_dat->gpio); - goto err; - } } platform_set_drvdata(pdev, leds_data); @@ -123,13 +145,8 @@ static int gpio_led_probe(struct platform_device *pdev) return 0; err: - if (i > 0) { - for (i = i - 1; i >= 0; i--) { - led_classdev_unregister(&leds_data[i].cdev); - cancel_work_sync(&leds_data[i].work); - gpio_free(leds_data[i].gpio); - } - } + for (i = i - 1; i >= 0; i--) + delete_gpio_led(&leds_data[i]); kfree(leds_data); @@ -144,11 +161,8 @@ static int __devexit gpio_led_remove(struct platform_device *pdev) leds_data = platform_get_drvdata(pdev); - for (i = 0; i < pdata->num_leds; i++) { - led_classdev_unregister(&leds_data[i].cdev); - cancel_work_sync(&leds_data[i].work); - gpio_free(leds_data[i].gpio); - } + for (i = 0; i < pdata->num_leds; i++) + delete_gpio_led(&leds_data[i]); kfree(leds_data); @@ -177,7 +191,112 @@ static void __exit gpio_led_exit(void) module_init(gpio_led_init); module_exit(gpio_led_exit); -MODULE_AUTHOR("Raphael Assenat <raph@8d.com>"); +MODULE_ALIAS("platform:leds-gpio"); +#endif /* CONFIG_LEDS_GPIO_PLATFORM */ + +/* Code to create from OpenFirmware platform devices */ +#ifdef CONFIG_LEDS_GPIO_OF +#include <linux/of_platform.h> +#include <linux/of_gpio.h> + +struct gpio_led_of_platform_data { + int num_leds; + struct gpio_led_data led_data[]; +}; + +static int __devinit of_gpio_leds_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct device_node *np = ofdev->node, *child; + struct gpio_led led; + struct gpio_led_of_platform_data *pdata; + int count = 0, ret; + + /* count LEDs defined by this device, so we know how much to allocate */ + for_each_child_of_node(np, child) + count++; + if (!count) + return 0; /* or ENODEV? */ + + pdata = kzalloc(sizeof(*pdata) + sizeof(struct gpio_led_data) * count, + GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + memset(&led, 0, sizeof(led)); + for_each_child_of_node(np, child) { + enum of_gpio_flags flags; + + led.gpio = of_get_gpio_flags(child, 0, &flags); + led.active_low = flags & OF_GPIO_ACTIVE_LOW; + led.name = of_get_property(child, "label", NULL) ? : child->name; + led.default_trigger = + of_get_property(child, "linux,default-trigger", NULL); + + ret = create_gpio_led(&led, &pdata->led_data[pdata->num_leds++], + &ofdev->dev, NULL); + if (ret < 0) { + of_node_put(child); + goto err; + } + } + + dev_set_drvdata(&ofdev->dev, pdata); + + return 0; + +err: + for (count = pdata->num_leds - 2; count >= 0; count--) + delete_gpio_led(&pdata->led_data[count]); + + kfree(pdata); + + return ret; +} + +static int __devexit of_gpio_leds_remove(struct of_device *ofdev) +{ + struct gpio_led_of_platform_data *pdata = dev_get_drvdata(&ofdev->dev); + int i; + + for (i = 0; i < pdata->num_leds; i++) + delete_gpio_led(&pdata->led_data[i]); + + kfree(pdata); + + dev_set_drvdata(&ofdev->dev, NULL); + + return 0; +} + +static const struct of_device_id of_gpio_leds_match[] = { + { .compatible = "gpio-leds", }, + {}, +}; + +static struct of_platform_driver of_gpio_leds_driver = { + .driver = { + .name = "of_gpio_leds", + .owner = THIS_MODULE, + }, + .match_table = of_gpio_leds_match, + .probe = of_gpio_leds_probe, + .remove = __devexit_p(of_gpio_leds_remove), +}; + +static int __init of_gpio_leds_init(void) +{ + return of_register_platform_driver(&of_gpio_leds_driver); +} +module_init(of_gpio_leds_init); + +static void __exit of_gpio_leds_exit(void) +{ + of_unregister_platform_driver(&of_gpio_leds_driver); +} +module_exit(of_gpio_leds_exit); +#endif + +MODULE_AUTHOR("Raphael Assenat <raph@8d.com>, Trent Piepho <tpiepho@freescale.com>"); MODULE_DESCRIPTION("GPIO LED driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:leds-gpio"); |
