summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/bus/arm-cci.c119
1 files changed, 113 insertions, 6 deletions
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index ea81fa4a28db..380319ebf729 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -43,6 +43,7 @@ enum cci_ace_port_type {
struct cci_ace_port {
void __iomem *base;
+ unsigned long phys;
enum cci_ace_port_type type;
struct device_node *dn;
};
@@ -51,11 +52,13 @@ static struct cci_ace_port *ports;
static unsigned int nb_cci_ports;
static void __iomem *cci_ctrl_base;
+static unsigned long cci_ctrl_phys;
struct cpu_port {
u64 mpidr;
u32 port;
};
+
/*
* Use the port MSB as valid flag, shift can be made dynamic
* by computing number of bits required for port indexes.
@@ -230,6 +233,102 @@ int notrace cci_disable_port_by_cpu(u64 mpidr)
EXPORT_SYMBOL_GPL(cci_disable_port_by_cpu);
/**
+ * cci_enable_port_for_self() - enable a CCI port for calling CPU
+ *
+ * Enabling a CCI port for the calling CPU implies enabling the CCI
+ * port controlling that CPU's cluster. Caller must make sure that the
+ * CPU running the code is the first active CPU in the cluster and all
+ * other CPUs are quiescent in a low power state or waiting for this CPU
+ * to complete the CCI initialization.
+ *
+ * Because this is called when the MMU is still off and with no stack,
+ * the code must be position independent and ideally rely on callee
+ * clobbered registers only. To achieve this we must code this function
+ * entirely in assembler.
+ *
+ * On success this returns with the proper CCI port enabled. In case of
+ * any failure this never returns as the inability to enable the CCI is
+ * fatal and there is no possible recovery at this stage.
+ */
+asmlinkage void __naked cci_enable_port_for_self(void)
+{
+ asm volatile ("\n"
+
+" mrc p15, 0, r0, c0, c0, 5 @ get MPIDR value \n"
+" and r0, r0, #"__stringify(MPIDR_HWID_BITMASK)" \n"
+" adr r1, 5f \n"
+" ldr r2, [r1] \n"
+" add r1, r1, r2 @ &cpu_port \n"
+" add ip, r1, %[sizeof_cpu_port] \n"
+
+ /* Loop over the cpu_port array looking for a matching MPIDR */
+"1: ldr r2, [r1, %[offsetof_cpu_port_mpidr_lsb]] \n"
+" cmp r2, r0 @ compare MPIDR \n"
+" bne 2f \n"
+
+ /* Found a match, now test port validity */
+" ldr r3, [r1, %[offsetof_cpu_port_port]] \n"
+" tst r3, #"__stringify(PORT_VALID)" \n"
+" bne 3f \n"
+
+ /* no match, loop with the next cpu_port entry */
+"2: add r1, r1, %[sizeof_struct_cpu_port] \n"
+" cmp r1, ip @ done? \n"
+" blo 1b \n"
+
+ /* CCI port not found -- cheaply try to stall this CPU */
+"cci_port_not_found: \n"
+" wfi \n"
+" wfe \n"
+" b cci_port_not_found \n"
+
+ /* Use matched port index to look up the corresponding ports entry */
+"3: bic r3, r3, #"__stringify(PORT_VALID)" \n"
+" adr r0, 6f \n"
+" ldmia r0, {r1, r2} \n"
+" sub r1, r1, r0 @ virt - phys \n"
+" ldr r0, [r0, r2] @ *(&ports) \n"
+" mov r2, %[sizeof_struct_ace_port] \n"
+" mla r0, r2, r3, r0 @ &ports[index] \n"
+" sub r0, r0, r1 @ virt_to_phys() \n"
+
+ /* Enable the CCI port */
+" ldr r0, [r0, %[offsetof_port_phys]] \n"
+" mov r3, #"__stringify(CCI_ENABLE_REQ)" \n"
+" str r3, [r0, #"__stringify(CCI_PORT_CTRL)"] \n"
+
+ /* poll the status reg for completion */
+" adr r1, 7f \n"
+" ldr r0, [r1] \n"
+" ldr r0, [r0, r1] @ cci_ctrl_base \n"
+"4: ldr r1, [r0, #"__stringify(CCI_CTRL_STATUS)"] \n"
+" tst r1, #1 \n"
+" bne 4b \n"
+
+" mov r0, #0 \n"
+" bx lr \n"
+
+" .align 2 \n"
+"5: .word cpu_port - . \n"
+"6: .word . \n"
+" .word ports - 6b \n"
+"7: .word cci_ctrl_phys - . \n"
+ : :
+ [sizeof_cpu_port] "i" (sizeof(cpu_port)),
+#ifndef __ARMEB__
+ [offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)),
+#else
+ [offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)+4),
+#endif
+ [offsetof_cpu_port_port] "i" (offsetof(struct cpu_port, port)),
+ [sizeof_struct_cpu_port] "i" (sizeof(struct cpu_port)),
+ [sizeof_struct_ace_port] "i" (sizeof(struct cci_ace_port)),
+ [offsetof_port_phys] "i" (offsetof(struct cci_ace_port, phys)) );
+
+ unreachable();
+}
+
+/**
* __cci_control_port_by_device() - function to control a CCI port by device
* reference
*
@@ -306,6 +405,7 @@ static int __init cci_probe(void)
struct cci_nb_ports const *cci_config;
int ret, i, nb_ace = 0, nb_ace_lite = 0;
struct device_node *np, *cp;
+ struct resource res;
const char *match_str;
bool is_ace;
@@ -323,9 +423,12 @@ static int __init cci_probe(void)
if (!ports)
return -ENOMEM;
- cci_ctrl_base = of_iomap(np, 0);
-
- if (!cci_ctrl_base) {
+ ret = of_address_to_resource(np, 0, &res);
+ if (!ret) {
+ cci_ctrl_base = ioremap(res.start, resource_size(&res));
+ cci_ctrl_phys = res.start;
+ }
+ if (ret || !cci_ctrl_base) {
WARN(1, "unable to ioremap CCI ctrl\n");
ret = -ENXIO;
goto memalloc_err;
@@ -353,9 +456,12 @@ static int __init cci_probe(void)
continue;
}
- ports[i].base = of_iomap(cp, 0);
-
- if (!ports[i].base) {
+ ret = of_address_to_resource(cp, 0, &res);
+ if (!ret) {
+ ports[i].base = ioremap(res.start, resource_size(&res));
+ ports[i].phys = res.start;
+ }
+ if (ret || !ports[i].base) {
WARN(1, "unable to ioremap CCI port %d\n", i);
continue;
}
@@ -382,6 +488,7 @@ static int __init cci_probe(void)
* cluster power-up/power-down. Make sure it reaches main memory.
*/
sync_cache_w(&cci_ctrl_base);
+ sync_cache_w(&cci_ctrl_phys);
sync_cache_w(&ports);
sync_cache_w(&cpu_port);
__sync_cache_range_w(ports, sizeof(*ports) * nb_cci_ports);
OpenPOWER on IntegriCloud