summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/networking/gianfar.txt30
-rw-r--r--drivers/net/ethernet/freescale/Makefile3
-rw-r--r--drivers/net/ethernet/freescale/gianfar.c57
-rw-r--r--drivers/net/ethernet/freescale/gianfar.h6
-rw-r--r--drivers/net/ethernet/freescale/gianfar_sysfs.c340
5 files changed, 28 insertions, 408 deletions
diff --git a/Documentation/networking/gianfar.txt b/Documentation/networking/gianfar.txt
index ad474ea07d07..ba1daea7f2e4 100644
--- a/Documentation/networking/gianfar.txt
+++ b/Documentation/networking/gianfar.txt
@@ -1,38 +1,8 @@
The Gianfar Ethernet Driver
-Sysfs File description
Author: Andy Fleming <afleming@freescale.com>
Updated: 2005-07-28
-SYSFS
-
-Several of the features of the gianfar driver are controlled
-through sysfs files. These are:
-
-bd_stash:
-To stash RX Buffer Descriptors in the L2, echo 'on' or '1' to
-bd_stash, echo 'off' or '0' to disable
-
-rx_stash_len:
-To stash the first n bytes of the packet in L2, echo the number
-of bytes to buf_stash_len. echo 0 to disable.
-
-WARNING: You could really screw these up if you set them too low or high!
-fifo_threshold:
-To change the number of bytes the controller needs in the
-fifo before it starts transmission, echo the number of bytes to
-fifo_thresh. Range should be 0-511.
-
-fifo_starve:
-When the FIFO has less than this many bytes during a transmit, it
-enters starve mode, and increases the priority of TX memory
-transactions. To change, echo the number of bytes to
-fifo_starve. Range should be 0-511.
-
-fifo_starve_off:
-Once in starve mode, the FIFO remains there until it has this
-many bytes. To change, echo the number of bytes to
-fifo_starve_off. Range should be 0-511.
CHECKSUM OFFLOADING
diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile
index 549ce13b92ac..71debd1c18c9 100644
--- a/drivers/net/ethernet/freescale/Makefile
+++ b/drivers/net/ethernet/freescale/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_FSL_XGMAC_MDIO) += xgmac_mdio.o
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
gianfar_driver-objs := gianfar.o \
- gianfar_ethtool.o \
- gianfar_sysfs.o
+ gianfar_ethtool.o
obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index ab915b060d4c..9b12201d396d 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -338,7 +338,6 @@ static void gfar_init_mac(struct net_device *ndev)
struct gfar __iomem *regs = priv->gfargrp[0].regs;
u32 rctrl = 0;
u32 tctrl = 0;
- u32 attrs = 0;
/* write the tx/rx base registers */
gfar_init_tx_rx_base(priv);
@@ -409,29 +408,6 @@ static void gfar_init_mac(struct net_device *ndev)
}
gfar_write(&regs->tctrl, tctrl);
-
- /* Set the extraction length and index */
- attrs = ATTRELI_EL(priv->rx_stash_size) |
- ATTRELI_EI(priv->rx_stash_index);
-
- gfar_write(&regs->attreli, attrs);
-
- /* Start with defaults, and add stashing or locking
- * depending on the approprate variables
- */
- attrs = ATTR_INIT_SETTINGS;
-
- if (priv->bd_stash_en)
- attrs |= ATTR_BDSTASH;
-
- if (priv->rx_stash_size != 0)
- attrs |= ATTR_BUFSTASH;
-
- gfar_write(&regs->attr, attrs);
-
- gfar_write(&regs->fifo_tx_thr, priv->fifo_threshold);
- gfar_write(&regs->fifo_tx_starve, priv->fifo_starve);
- gfar_write(&regs->fifo_tx_starve_shutoff, priv->fifo_starve_off);
}
static struct net_device_stats *gfar_get_stats(struct net_device *dev)
@@ -784,13 +760,13 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
memcpy(dev->dev_addr, mac_addr, ETH_ALEN);
if (model && !strcasecmp(model, "TSEC"))
- priv->device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+ priv->device_flags |= FSL_GIANFAR_DEV_HAS_GIGABIT |
FSL_GIANFAR_DEV_HAS_COALESCE |
FSL_GIANFAR_DEV_HAS_RMON |
FSL_GIANFAR_DEV_HAS_MULTI_INTR;
if (model && !strcasecmp(model, "eTSEC"))
- priv->device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+ priv->device_flags |= FSL_GIANFAR_DEV_HAS_GIGABIT |
FSL_GIANFAR_DEV_HAS_COALESCE |
FSL_GIANFAR_DEV_HAS_RMON |
FSL_GIANFAR_DEV_HAS_MULTI_INTR |
@@ -1030,7 +1006,7 @@ static void gfar_detect_errata(struct gfar_private *priv)
static void gfar_hw_init(struct gfar_private *priv)
{
struct gfar __iomem *regs = priv->gfargrp[0].regs;
- u32 tempval;
+ u32 tempval, attrs;
/* Reset MAC layer */
gfar_write(&regs->maccfg1, MACCFG1_SOFT_RESET);
@@ -1052,6 +1028,30 @@ static void gfar_hw_init(struct gfar_private *priv)
/* Initialize ECNTRL */
gfar_write(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
+ /* Set the extraction length and index */
+ attrs = ATTRELI_EL(priv->rx_stash_size) |
+ ATTRELI_EI(priv->rx_stash_index);
+
+ gfar_write(&regs->attreli, attrs);
+
+ /* Start with defaults, and add stashing
+ * depending on driver parameters
+ */
+ attrs = ATTR_INIT_SETTINGS;
+
+ if (priv->bd_stash_en)
+ attrs |= ATTR_BDSTASH;
+
+ if (priv->rx_stash_size != 0)
+ attrs |= ATTR_BUFSTASH;
+
+ gfar_write(&regs->attr, attrs);
+
+ /* FIFO configs */
+ gfar_write(&regs->fifo_tx_thr, DEFAULT_FIFO_TX_THR);
+ gfar_write(&regs->fifo_tx_starve, DEFAULT_FIFO_TX_STARVE);
+ gfar_write(&regs->fifo_tx_starve_shutoff, DEFAULT_FIFO_TX_STARVE_OFF);
+
/* Program the interrupt steering regs, only for MG devices */
if (priv->num_grps > 1)
gfar_write_isrg(priv);
@@ -1232,9 +1232,6 @@ static int gfar_probe(struct platform_device *ofdev)
/* Initialize the filer table */
gfar_init_filer_table(priv);
- /* Create all the sysfs files */
- gfar_init_sysfs(dev);
-
/* Print out the device info */
netdev_info(dev, "mac: %pM\n", dev->dev_addr);
diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index 63c830c3181b..de6e4f63dcb2 100644
--- a/drivers/net/ethernet/freescale/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
@@ -1130,11 +1130,6 @@ struct gfar_private {
u32 __iomem *hash_regs[16];
int hash_width;
- /* global parameters */
- unsigned int fifo_threshold;
- unsigned int fifo_starve;
- unsigned int fifo_starve_off;
-
/*Filer table*/
unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
@@ -1215,7 +1210,6 @@ void gfar_halt(struct net_device *dev);
void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev, int enable,
u32 regnum, u32 read);
void gfar_configure_coalescing_all(struct gfar_private *priv);
-void gfar_init_sysfs(struct net_device *dev);
int gfar_set_features(struct net_device *dev, netdev_features_t features);
void gfar_check_rx_parser_mode(struct gfar_private *priv);
void gfar_vlan_mode(struct net_device *dev, netdev_features_t features);
diff --git a/drivers/net/ethernet/freescale/gianfar_sysfs.c b/drivers/net/ethernet/freescale/gianfar_sysfs.c
deleted file mode 100644
index e02dd1378751..000000000000
--- a/drivers/net/ethernet/freescale/gianfar_sysfs.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * drivers/net/ethernet/freescale/gianfar_sysfs.c
- *
- * Gianfar Ethernet Driver
- * This driver is designed for the non-CPM ethernet controllers
- * on the 85xx and 83xx family of integrated processors
- * Based on 8260_io/fcc_enet.c
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala (galak@kernel.crashing.org)
- * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
- *
- * Copyright 2002-2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Sysfs file creation and management
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/device.h>
-
-#include <asm/uaccess.h>
-#include <linux/module.h>
-
-#include "gianfar.h"
-
-static ssize_t gfar_show_bd_stash(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
- return sprintf(buf, "%s\n", priv->bd_stash_en ? "on" : "off");
-}
-
-static ssize_t gfar_set_bd_stash(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct gfar_private *priv = netdev_priv(to_net_dev(dev));
- struct gfar __iomem *regs = priv->gfargrp[0].regs;
- int new_setting = 0;
- u32 temp;
- unsigned long flags;
-
- if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BD_STASHING))
- return count;
-
-
- /* Find out the new setting */
- if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1))
- new_setting = 1;
- else if (!strncmp("off", buf, count - 1) ||
- !strncmp("0", buf, count - 1))
- new_setting = 0;
- else
- return count;
-
-
- local_irq_save(flags);
- lock_rx_qs(priv);
-
- /* Set the new stashing value */
- priv->bd_stash_en = new_setting;
-
- temp = gfar_read(&regs->attr);
-
- if (new_setting)
- temp |= ATTR_BDSTASH;
- else
- temp &= ~(ATTR_BDSTASH);
-
- gfar_write(&regs->attr, temp);
-
- unlock_rx_qs(priv);
- local_irq_restore(flags);
-
- return count;
-}
-
-static DEVICE_ATTR(bd_stash, 0644, gfar_show_bd_stash, gfar_set_bd_stash);
-
-static ssize_t gfar_show_rx_stash_size(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
- return sprintf(buf, "%d\n", priv->rx_stash_size);
-}
-
-static ssize_t gfar_set_rx_stash_size(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct gfar_private *priv = netdev_priv(to_net_dev(dev));
- struct gfar __iomem *regs = priv->gfargrp[0].regs;
- unsigned int length = simple_strtoul(buf, NULL, 0);
- u32 temp;
- unsigned long flags;
-
- if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BUF_STASHING))
- return count;
-
- local_irq_save(flags);
- lock_rx_qs(priv);
-
- if (length > priv->rx_buffer_size)
- goto out;
-
- if (length == priv->rx_stash_size)
- goto out;
-
- priv->rx_stash_size = length;
-
- temp = gfar_read(&regs->attreli);
- temp &= ~ATTRELI_EL_MASK;
- temp |= ATTRELI_EL(length);
- gfar_write(&regs->attreli, temp);
-
- /* Turn stashing on/off as appropriate */
- temp = gfar_read(&regs->attr);
-
- if (length)
- temp |= ATTR_BUFSTASH;
- else
- temp &= ~(ATTR_BUFSTASH);
-
- gfar_write(&regs->attr, temp);
-
-out:
- unlock_rx_qs(priv);
- local_irq_restore(flags);
-
- return count;
-}
-
-static DEVICE_ATTR(rx_stash_size, 0644, gfar_show_rx_stash_size,
- gfar_set_rx_stash_size);
-
-/* Stashing will only be enabled when rx_stash_size != 0 */
-static ssize_t gfar_show_rx_stash_index(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
- return sprintf(buf, "%d\n", priv->rx_stash_index);
-}
-
-static ssize_t gfar_set_rx_stash_index(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct gfar_private *priv = netdev_priv(to_net_dev(dev));
- struct gfar __iomem *regs = priv->gfargrp[0].regs;
- unsigned short index = simple_strtoul(buf, NULL, 0);
- u32 temp;
- unsigned long flags;
-
- if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BUF_STASHING))
- return count;
-
- local_irq_save(flags);
- lock_rx_qs(priv);
-
- if (index > priv->rx_stash_size)
- goto out;
-
- if (index == priv->rx_stash_index)
- goto out;
-
- priv->rx_stash_index = index;
-
- temp = gfar_read(&regs->attreli);
- temp &= ~ATTRELI_EI_MASK;
- temp |= ATTRELI_EI(index);
- gfar_write(&regs->attreli, temp);
-
-out:
- unlock_rx_qs(priv);
- local_irq_restore(flags);
-
- return count;
-}
-
-static DEVICE_ATTR(rx_stash_index, 0644, gfar_show_rx_stash_index,
- gfar_set_rx_stash_index);
-
-static ssize_t gfar_show_fifo_threshold(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
- return sprintf(buf, "%d\n", priv->fifo_threshold);
-}
-
-static ssize_t gfar_set_fifo_threshold(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct gfar_private *priv = netdev_priv(to_net_dev(dev));
- struct gfar __iomem *regs = priv->gfargrp[0].regs;
- unsigned int length = simple_strtoul(buf, NULL, 0);
- u32 temp;
- unsigned long flags;
-
- if (length > GFAR_MAX_FIFO_THRESHOLD)
- return count;
-
- local_irq_save(flags);
- lock_tx_qs(priv);
-
- priv->fifo_threshold = length;
-
- temp = gfar_read(&regs->fifo_tx_thr);
- temp &= ~FIFO_TX_THR_MASK;
- temp |= length;
- gfar_write(&regs->fifo_tx_thr, temp);
-
- unlock_tx_qs(priv);
- local_irq_restore(flags);
-
- return count;
-}
-
-static DEVICE_ATTR(fifo_threshold, 0644, gfar_show_fifo_threshold,
- gfar_set_fifo_threshold);
-
-static ssize_t gfar_show_fifo_starve(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
- return sprintf(buf, "%d\n", priv->fifo_starve);
-}
-
-static ssize_t gfar_set_fifo_starve(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct gfar_private *priv = netdev_priv(to_net_dev(dev));
- struct gfar __iomem *regs = priv->gfargrp[0].regs;
- unsigned int num = simple_strtoul(buf, NULL, 0);
- u32 temp;
- unsigned long flags;
-
- if (num > GFAR_MAX_FIFO_STARVE)
- return count;
-
- local_irq_save(flags);
- lock_tx_qs(priv);
-
- priv->fifo_starve = num;
-
- temp = gfar_read(&regs->fifo_tx_starve);
- temp &= ~FIFO_TX_STARVE_MASK;
- temp |= num;
- gfar_write(&regs->fifo_tx_starve, temp);
-
- unlock_tx_qs(priv);
- local_irq_restore(flags);
-
- return count;
-}
-
-static DEVICE_ATTR(fifo_starve, 0644, gfar_show_fifo_starve,
- gfar_set_fifo_starve);
-
-static ssize_t gfar_show_fifo_starve_off(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct gfar_private *priv = netdev_priv(to_net_dev(dev));
-
- return sprintf(buf, "%d\n", priv->fifo_starve_off);
-}
-
-static ssize_t gfar_set_fifo_starve_off(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct gfar_private *priv = netdev_priv(to_net_dev(dev));
- struct gfar __iomem *regs = priv->gfargrp[0].regs;
- unsigned int num = simple_strtoul(buf, NULL, 0);
- u32 temp;
- unsigned long flags;
-
- if (num > GFAR_MAX_FIFO_STARVE_OFF)
- return count;
-
- local_irq_save(flags);
- lock_tx_qs(priv);
-
- priv->fifo_starve_off = num;
-
- temp = gfar_read(&regs->fifo_tx_starve_shutoff);
- temp &= ~FIFO_TX_STARVE_OFF_MASK;
- temp |= num;
- gfar_write(&regs->fifo_tx_starve_shutoff, temp);
-
- unlock_tx_qs(priv);
- local_irq_restore(flags);
-
- return count;
-}
-
-static DEVICE_ATTR(fifo_starve_off, 0644, gfar_show_fifo_starve_off,
- gfar_set_fifo_starve_off);
-
-void gfar_init_sysfs(struct net_device *dev)
-{
- struct gfar_private *priv = netdev_priv(dev);
- int rc;
-
- /* Initialize the default values */
- priv->fifo_threshold = DEFAULT_FIFO_TX_THR;
- priv->fifo_starve = DEFAULT_FIFO_TX_STARVE;
- priv->fifo_starve_off = DEFAULT_FIFO_TX_STARVE_OFF;
-
- /* Create our sysfs files */
- rc = device_create_file(&dev->dev, &dev_attr_bd_stash);
- rc |= device_create_file(&dev->dev, &dev_attr_rx_stash_size);
- rc |= device_create_file(&dev->dev, &dev_attr_rx_stash_index);
- rc |= device_create_file(&dev->dev, &dev_attr_fifo_threshold);
- rc |= device_create_file(&dev->dev, &dev_attr_fifo_starve);
- rc |= device_create_file(&dev->dev, &dev_attr_fifo_starve_off);
- if (rc)
- dev_err(&dev->dev, "Error creating gianfar sysfs files\n");
-}
OpenPOWER on IntegriCloud