diff options
| -rw-r--r-- | arch/i386/kernel/cpu/cpufreq/longhaul.c | 53 |
1 files changed, 31 insertions, 22 deletions
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index fa5cac255c16..b59878a0d9b3 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -8,12 +8,11 @@ * VIA have currently 3 different versions of Longhaul. * Version 1 (Longhaul) uses the BCR2 MSR at 0x1147. * It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0. - * Version 2 of longhaul is the same as v1, but adds voltage scaling. - * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C) - * voltage scaling support has currently been disabled in this driver - * until we have code that gets it right. + * Version 2 of longhaul is backward compatible with v1, but adds + * LONGHAUL MSR for purpose of both frequency and voltage scaling. + * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C). * Version 3 of longhaul got renamed to Powersaver and redesigned - * to use the POWERSAVER MSR at 0x110a. + * to use only the POWERSAVER MSR at 0x110a. * It is present in Ezra-T (C5M), Nehemiah (C5X) and above. * It's pretty much the same feature wise to longhaul v2, though * there is provision for scaling FSB too, but this doesn't work @@ -298,26 +297,19 @@ static void longhaul_setstate(unsigned int clock_ratio_index) /* * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B]) * Software controlled multipliers only. - * - * *NB* Until we get voltage scaling working v1 & v2 are the same code. - * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5b] and Ezra [C5C] */ case TYPE_LONGHAUL_V1: - case TYPE_LONGHAUL_V2: do_longhaul1(clock_ratio_index); break; /* + * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C] + * * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N]) - * We can scale voltage with this too, but that's currently - * disabled until we come up with a decent 'match freq to voltage' - * algorithm. - * When we add voltage scaling, we will also need to do the - * voltage/freq setting in order depending on the direction - * of scaling (like we do in powernow-k7.c) * Nehemiah can do FSB scaling too, but this has never been proven * to work in practice. */ + case TYPE_LONGHAUL_V2: case TYPE_POWERSAVER: if (longhaul_flags & USE_ACPI_C3) { /* Don't allow wakeup */ @@ -342,6 +334,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index) local_irq_restore(flags); preempt_enable(); + freqs.new = calc_speed(longhaul_get_cpu_mult()); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } @@ -471,6 +464,8 @@ static void __init longhaul_setup_voltagescaling(void) mV_vrm_table = &mV_vrm85[0]; } else { printk (KERN_INFO PFX "Mobile VRM\n"); + if (cpu_model < CPU_NEHEMIAH) + return; vrm_mV_table = &mobilevrm_mV[0]; mV_vrm_table = &mV_mobilevrm[0]; } @@ -656,6 +651,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) struct cpuinfo_x86 *c = cpu_data; char *cpuname=NULL; int ret; + u32 lo, hi; int vt8235_present; /* Check what we have on this motherboard */ @@ -669,16 +665,20 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) break; case 7: - longhaul_version = TYPE_LONGHAUL_V1; switch (c->x86_mask) { case 0: + longhaul_version = TYPE_LONGHAUL_V1; cpu_model = CPU_SAMUEL2; cpuname = "C3 'Samuel 2' [C5B]"; - /* Note, this is not a typo, early Samuel2's had Samuel1 ratios. */ - memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio)); - memcpy (eblcr_table, samuel2_eblcr, sizeof(samuel2_eblcr)); + /* Note, this is not a typo, early Samuel2's had + * Samuel1 ratios. */ + memcpy(clock_ratio, samuel1_clock_ratio, + sizeof(samuel1_clock_ratio)); + memcpy(eblcr_table, samuel2_eblcr, + sizeof(samuel2_eblcr)); break; case 1 ... 15: + longhaul_version = TYPE_LONGHAUL_V2; if (c->x86_mask < 8) { cpu_model = CPU_SAMUEL2; cpuname = "C3 'Samuel 2' [C5B]"; @@ -686,8 +686,10 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpu_model = CPU_EZRA; cpuname = "C3 'Ezra' [C5C]"; } - memcpy (clock_ratio, ezra_clock_ratio, sizeof(ezra_clock_ratio)); - memcpy (eblcr_table, ezra_eblcr, sizeof(ezra_eblcr)); + memcpy(clock_ratio, ezra_clock_ratio, + sizeof(ezra_clock_ratio)); + memcpy(eblcr_table, ezra_eblcr, + sizeof(ezra_eblcr)); break; } break; @@ -728,6 +730,13 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpuname = "Unknown"; break; } + /* Check Longhaul ver. 2 */ + if (longhaul_version == TYPE_LONGHAUL_V2) { + rdmsr(MSR_VIA_LONGHAUL, lo, hi); + if (lo == 0 && hi == 0) + /* Looks like MSR isn't present */ + longhaul_version = TYPE_LONGHAUL_V1; + } printk (KERN_INFO PFX "VIA %s CPU detected. ", cpuname); switch (longhaul_version) { @@ -749,7 +758,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) NULL, (void *)&pr); /* Check ACPI support for C3 state */ - if (pr != NULL && longhaul_version == TYPE_POWERSAVER) { + if (pr != NULL && longhaul_version != TYPE_LONGHAUL_V1) { cx = &pr->power.states[ACPI_STATE_C3]; if (cx->address > 0 && cx->latency <= 1000) { longhaul_flags |= USE_ACPI_C3; |
