summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/acenic.c5
-rw-r--r--drivers/net/e100.c3
-rw-r--r--drivers/net/hp100.c3
-rw-r--r--drivers/net/ns83820.c1
-rw-r--r--drivers/net/s2io.c7
-rw-r--r--drivers/net/sk98lin/skge.c5
-rw-r--r--drivers/net/sungem.c5
-rw-r--r--drivers/net/tlan.c3
-rw-r--r--drivers/net/tokenring/lanstreamer.c3
-rw-r--r--drivers/net/via-rhine.c3
-rw-r--r--drivers/net/wan/wanxl.c5
11 files changed, 27 insertions, 16 deletions
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index 6eea3a8accb7..dbecc6bf7851 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -58,6 +58,7 @@
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
@@ -1167,9 +1168,9 @@ static int __devinit ace_init(struct net_device *dev)
/*
* Configure DMA attributes.
*/
- if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
ap->pci_using_dac = 1;
- } else if (!pci_set_dma_mask(pdev, 0xffffffffULL)) {
+ } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
ap->pci_using_dac = 0;
} else {
ecode = -ENODEV;
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 4a47df5a9ff9..cfaa6b2bf345 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -143,6 +143,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/mii.h>
@@ -2286,7 +2287,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
goto err_out_disable_pdev;
}
- if((err = pci_set_dma_mask(pdev, 0xFFFFFFFFULL))) {
+ if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n");
goto err_out_free_res;
}
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index c9d1a86d9594..cf0ac6fda1a1 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -106,6 +106,7 @@
#include <linux/interrupt.h>
#include <linux/eisa.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
@@ -557,7 +558,7 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
* Also, we can have EISA Busmaster cards (not tested),
* so beware !!! - Jean II */
if((bus == HP100_BUS_PCI) &&
- (pci_set_dma_mask(pci_dev, 0xffffffff))) {
+ (pci_set_dma_mask(pci_dev, DMA_32BIT_MASK))) {
/* Gracefully fallback to shared memory */
goto busmasterfail;
}
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index c336b46bd332..cc7965271778 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -101,6 +101,7 @@
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 9c224eba057d..bb639a8794d4 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -42,6 +42,7 @@
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
@@ -4593,19 +4594,19 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
return ret;
}
- if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
dma_flag = TRUE;
if (pci_set_consistent_dma_mask
- (pdev, 0xffffffffffffffffULL)) {
+ (pdev, DMA_64BIT_MASK)) {
DBG_PRINT(ERR_DBG,
"Unable to obtain 64bit DMA for \
consistent allocations\n");
pci_disable_device(pdev);
return -ENOMEM;
}
- } else if (!pci_set_dma_mask(pdev, 0xffffffffUL)) {
+ } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 32bit DMA\n");
} else {
pci_disable_device(pdev);
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 1ccb2989001c..82570ec44d8e 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -112,6 +112,7 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
+#include <linux/dma-mapping.h>
#include "h/skdrv1st.h"
#include "h/skdrv2nd.h"
@@ -4912,8 +4913,8 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
goto out;
/* Configure DMA attributes. */
- if (pci_set_dma_mask(pdev, (u64) 0xffffffffffffffffULL) &&
- pci_set_dma_mask(pdev, (u64) 0xffffffff))
+ if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+ pci_set_dma_mask(pdev, DMA_32BIT_MASK))
goto out_disable_device;
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 5cd50fd53c12..1f5655655c40 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -44,6 +44,7 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
@@ -2989,10 +2990,10 @@ static int __devinit gem_init_one(struct pci_dev *pdev,
*/
if (pdev->vendor == PCI_VENDOR_ID_SUN &&
pdev->device == PCI_DEVICE_ID_SUN_GEM &&
- !pci_set_dma_mask(pdev, (u64) 0xffffffffffffffffULL)) {
+ !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
pci_using_dac = 1;
} else {
- err = pci_set_dma_mask(pdev, (u64) 0xffffffff);
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
printk(KERN_ERR PFX "No usable DMA configuration, "
"aborting.\n");
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index cf31c0629852..942fae0f2130 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -171,6 +171,7 @@
#include <linux/ioport.h>
#include <linux/eisa.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
@@ -566,7 +567,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
priv->adapter = &board_info[ent->driver_data];
- rc = pci_set_dma_mask(pdev, 0xFFFFFFFF);
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
printk(KERN_ERR "TLAN: No suitable PCI mapping available.\n");
goto err_out_free_dev;
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 99e0b03b69a8..6e5ade99a38f 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -118,6 +118,7 @@
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
#include <linux/version.h>
#include <linux/bitops.h>
@@ -257,7 +258,7 @@ static int __devinit streamer_init_one(struct pci_dev *pdev,
#endif
#endif
- rc = pci_set_dma_mask(pdev, 0xFFFFFFFFULL);
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
printk(KERN_ERR "%s: No suitable PCI mapping available.\n",
dev->name);
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 7b57d552094a..6200cfc4244e 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -186,6 +186,7 @@ static const int multicast_filter_limit = 32;
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
@@ -740,7 +741,7 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
goto err_out;
/* this should always be supported */
- rc = pci_set_dma_mask(pdev, 0xffffffff);
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
printk(KERN_ERR "32-bit PCI DMA addresses not supported by "
"the card!?\n");
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index 1e7b47704ad9..9c1e10602f2b 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -26,6 +26,7 @@
#include <linux/netdevice.h>
#include <linux/hdlc.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/delay.h>
@@ -624,8 +625,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
/* FIXME when PCI/DMA subsystems are fixed.
We set both dma_mask and consistent_dma_mask back to 32 bits
to indicate the card can do 32-bit DMA addressing */
- if (pci_set_consistent_dma_mask(pdev, 0xFFFFFFFF) ||
- pci_set_dma_mask(pdev, 0xFFFFFFFF)) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) ||
+ pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_ERR "wanXL: No usable DMA configuration\n");
wanxl_pci_remove_one(pdev);
return -EIO;
OpenPOWER on IntegriCloud