diff options
-rw-r--r-- | sound/pci/azt3328.c | 70 |
1 files changed, 23 insertions, 47 deletions
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c index c9af04ed200f..e68056c81580 100644 --- a/sound/pci/azt3328.c +++ b/sound/pci/azt3328.c @@ -33,7 +33,7 @@ * in the first place >:-P}), * I was forced to base this driver on reverse engineering * (3 weeks' worth of evenings filled with driver work). - * (and no, I did NOT go the easy way: to pick up a PCI128 for 9 Euros) + * (and no, I did NOT go the easy way: to pick up a SB PCI128 for 9 Euros) * * The AZF3328 chip (note: AZF3328, *not* AZT3328, that's just the driver name * for compatibility reasons) has the following features: @@ -339,10 +339,8 @@ snd_azf3328_mixer_write_volume_gradually(const struct snd_azf3328 *chip, int reg else dst_vol_left &= ~0x80; - do - { - if (!left_done) - { + do { + if (!left_done) { if (curr_vol_left > dst_vol_left) curr_vol_left--; else @@ -352,8 +350,7 @@ snd_azf3328_mixer_write_volume_gradually(const struct snd_azf3328 *chip, int reg left_done = 1; outb(curr_vol_left, portbase + 1); } - if (!right_done) - { + if (!right_done) { if (curr_vol_right > dst_vol_right) curr_vol_right--; else @@ -368,8 +365,7 @@ snd_azf3328_mixer_write_volume_gradually(const struct snd_azf3328 *chip, int reg } if (delay) mdelay(delay); - } - while ((!left_done) || (!right_done)); + } while ((!left_done) || (!right_done)); snd_azf3328_dbgcallleave(); } @@ -556,8 +552,7 @@ snd_azf3328_info_mixer_enum(struct snd_kcontrol *kcontrol, uinfo->value.enumerated.items = reg.enum_c; if (uinfo->value.enumerated.item > reg.enum_c - 1U) uinfo->value.enumerated.item = reg.enum_c - 1U; - if (reg.reg == IDX_MIXER_ADVCTL2) - { + if (reg.reg == IDX_MIXER_ADVCTL2) { switch(reg.lchan_shift) { case 8: /* modem out sel */ strcpy(uinfo->value.enumerated.name, texts1[uinfo->value.enumerated.item]); @@ -569,8 +564,7 @@ snd_azf3328_info_mixer_enum(struct snd_kcontrol *kcontrol, strcpy(uinfo->value.enumerated.name, texts4[uinfo->value.enumerated.item]); break; } - } - else + } else strcpy(uinfo->value.enumerated.name, texts3[uinfo->value.enumerated.item] ); return 0; @@ -586,12 +580,10 @@ snd_azf3328_get_mixer_enum(struct snd_kcontrol *kcontrol, snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); val = snd_azf3328_mixer_inw(chip, reg.reg); - if (reg.reg == IDX_MIXER_REC_SELECT) - { + if (reg.reg == IDX_MIXER_REC_SELECT) { ucontrol->value.enumerated.item[0] = (val >> 8) & (reg.enum_c - 1); ucontrol->value.enumerated.item[1] = (val >> 0) & (reg.enum_c - 1); - } - else + } else ucontrol->value.enumerated.item[0] = (val >> reg.lchan_shift) & (reg.enum_c - 1); snd_azf3328_dbgmixer("get_enum: %02x is %04x -> %d|%d (shift %02d, enum_c %d)\n", @@ -611,16 +603,13 @@ snd_azf3328_put_mixer_enum(struct snd_kcontrol *kcontrol, snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); oreg = snd_azf3328_mixer_inw(chip, reg.reg); val = oreg; - if (reg.reg == IDX_MIXER_REC_SELECT) - { + if (reg.reg == IDX_MIXER_REC_SELECT) { if (ucontrol->value.enumerated.item[0] > reg.enum_c - 1U || ucontrol->value.enumerated.item[1] > reg.enum_c - 1U) return -EINVAL; val = (ucontrol->value.enumerated.item[0] << 8) | (ucontrol->value.enumerated.item[1] << 0); - } - else - { + } else { if (ucontrol->value.enumerated.item[0] > reg.enum_c - 1U) return -EINVAL; val &= ~((reg.enum_c - 1) << reg.lchan_shift); @@ -846,22 +835,18 @@ snd_azf3328_setdmaa(struct snd_azf3328 *chip, unsigned int is_running; snd_azf3328_dbgcallenter(); - if (do_recording) - { + if (do_recording) { /* access capture registers, i.e. skip playback reg section */ portbase = chip->codec_port + 0x20; is_running = chip->is_recording; - } - else - { + } else { /* access the playback register section */ portbase = chip->codec_port + 0x00; is_running = chip->is_playing; } /* AZF3328 uses a two buffer pointer DMA playback approach */ - if (!is_running) - { + if (!is_running) { unsigned long addr_area2; unsigned long count_areas, count_tmp; /* width 32bit -- overflow!! */ count_areas = size/2; @@ -1224,8 +1209,7 @@ snd_azf3328_interrupt(int irq, void *dev_id, struct pt_regs *regs) snd_azf3328_codec_inw(chip, IDX_IO_PLAY_IRQTYPE), status); - if (status & IRQ_TIMER) - { + if (status & IRQ_TIMER) { /* snd_azf3328_dbgplay("timer %ld\n", inl(chip->codec_port+IDX_IO_TIMER_VALUE) & TIMER_VALUE_MASK); */ if (chip->timer) snd_timer_interrupt(chip->timer, chip->timer->sticks); @@ -1235,50 +1219,43 @@ snd_azf3328_interrupt(int irq, void *dev_id, struct pt_regs *regs) spin_unlock(&chip->reg_lock); snd_azf3328_dbgplay("azt3328: timer IRQ\n"); } - if (status & IRQ_PLAYBACK) - { + if (status & IRQ_PLAYBACK) { spin_lock(&chip->reg_lock); which = snd_azf3328_codec_inb(chip, IDX_IO_PLAY_IRQTYPE); /* ack all IRQ types immediately */ snd_azf3328_codec_outb(chip, IDX_IO_PLAY_IRQTYPE, which); spin_unlock(&chip->reg_lock); - if (chip->pcm && chip->playback_substream) - { + if (chip->pcm && chip->playback_substream) { snd_pcm_period_elapsed(chip->playback_substream); snd_azf3328_dbgplay("PLAY period done (#%x), @ %x\n", which, inl(chip->codec_port+IDX_IO_PLAY_DMA_CURRPOS)); - } - else + } else snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n"); if (which & IRQ_PLAY_SOMETHING) snd_azf3328_dbgplay("azt3328: unknown play IRQ type occurred, please report!\n"); } - if (status & IRQ_RECORDING) - { + if (status & IRQ_RECORDING) { spin_lock(&chip->reg_lock); which = snd_azf3328_codec_inb(chip, IDX_IO_REC_IRQTYPE); /* ack all IRQ types immediately */ snd_azf3328_codec_outb(chip, IDX_IO_REC_IRQTYPE, which); spin_unlock(&chip->reg_lock); - if (chip->pcm && chip->capture_substream) - { + if (chip->pcm && chip->capture_substream) { snd_pcm_period_elapsed(chip->capture_substream); snd_azf3328_dbgplay("REC period done (#%x), @ %x\n", which, inl(chip->codec_port+IDX_IO_REC_DMA_CURRPOS)); - } - else + } else snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n"); if (which & IRQ_REC_SOMETHING) snd_azf3328_dbgplay("azt3328: unknown rec IRQ type occurred, please report!\n"); } /* MPU401 has less critical IRQ requirements * than timer and playback/recording, right? */ - if (status & IRQ_MPU401) - { + if (status & IRQ_MPU401) { snd_mpu401_uart_interrupt(irq, chip->rmidi->private_data, regs); /* hmm, do we have to ack the IRQ here somehow? @@ -1572,8 +1549,7 @@ snd_azf3328_timer_start(struct snd_timer *timer) snd_azf3328_dbgcallenter(); chip = snd_timer_chip(timer); delay = ((timer->sticks * seqtimer_scaling) - 1) & TIMER_VALUE_MASK; - if (delay < 49) - { + if (delay < 49) { /* uhoh, that's not good, since user-space won't know about * this timing tweak * (we need to do it to avoid a lockup, though) */ |