summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--sound/soc/fsl/fsl_ssi.c44
1 files changed, 24 insertions, 20 deletions
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 6daeb5fbdc9b..198656fd171d 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -383,30 +383,11 @@ static int fsl_ssi_setup(struct fsl_ssi_private *ssi_private)
&ssi->sfcsr);
/*
- * For non-ac97 setups, we keep the SSI disabled because if we enable
- * it, then the DMA controller will start. It's not supposed to start
- * until the SCR.TE (or SCR.RE) bit is set, but it does anyway. The DMA
- * controller will transfer one "BWC" of data (i.e. the amount of data
- * that the MR.BWC bits are set to). The reason this is bad is because
- * at this point, the PCM driver has not finished initializing the DMA
- * controller.
- */
-
-
- /*
* For ac97 interrupts are enabled with the startup of the substream
* because it is also running without an active substream. Normally SSI
* is only enabled when there is a substream.
*/
- if (!ssi_private->imx_ac97) {
- /* Enable the interrupts and DMA requests */
- if (ssi_private->use_dma)
- write_ssi(SIER_FLAGS, &ssi->sier);
- else
- write_ssi(CCSR_SSI_SIER_TIE | CCSR_SSI_SIER_TFE0_EN |
- CCSR_SSI_SIER_RIE |
- CCSR_SSI_SIER_RFF0_EN, &ssi->sier);
- } else {
+ if (ssi_private->imx_ac97) {
/*
* Setup the clock control register
*/
@@ -574,6 +555,27 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(rtd->cpu_dai);
struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
+ unsigned int sier_bits;
+
+ /*
+ * Enable only the interrupts and DMA requests
+ * that are needed for the channel. As the fiq
+ * is polling for this bits, we have to ensure
+ * that this are aligned with the preallocated
+ * buffers
+ */
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (ssi_private->use_dma)
+ sier_bits = SIER_FLAGS;
+ else
+ sier_bits = CCSR_SSI_SIER_TIE | CCSR_SSI_SIER_TFE0_EN;
+ } else {
+ if (ssi_private->use_dma)
+ sier_bits = SIER_FLAGS;
+ else
+ sier_bits = CCSR_SSI_SIER_RIE | CCSR_SSI_SIER_RFF0_EN;
+ }
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
@@ -602,6 +604,8 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
return -EINVAL;
}
+ write_ssi(sier_bits, &ssi->sier);
+
return 0;
}
OpenPOWER on IntegriCloud