diff options
| -rw-r--r-- | arch/arm/configs/ixdp2800_defconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-ixp2000/ixdp2800.c | 147 |
2 files changed, 135 insertions, 14 deletions
diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig index d36f99192962..7be3521f91fc 100644 --- a/arch/arm/configs/ixdp2800_defconfig +++ b/arch/arm/configs/ixdp2800_defconfig @@ -133,7 +133,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" +CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0" # CONFIG_XIP_KERNEL is not set # diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index c4683aaff84a..aec13c7108a9 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -65,19 +65,102 @@ static struct sys_timer ixdp2800_timer = { /************************************************************************* * IXDP2800 PCI *************************************************************************/ +static void __init ixdp2800_slave_disable_pci_master(void) +{ + *IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); +} + +static void __init ixdp2800_master_wait_for_slave(void) +{ + volatile u32 *addr; + + printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure " + "its BAR sizes\n"); + + addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN, + PCI_BASE_ADDRESS_1); + do { + *addr = 0xffffffff; + cpu_relax(); + } while (*addr != 0xfe000008); + + addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN, + PCI_BASE_ADDRESS_2); + do { + *addr = 0xffffffff; + cpu_relax(); + } while (*addr != 0xc0000008); + + /* + * Configure the slave's SDRAM BAR by hand. + */ + *addr = 0x40000008; +} + +static void __init ixdp2800_slave_wait_for_master_enable(void) +{ + printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n"); + + while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0) + cpu_relax(); +} + void __init ixdp2800_pci_preinit(void) { printk("ixdp2x00_pci_preinit called\n"); - *IXP2000_PCI_ADDR_EXT = 0x0000e000; + *IXP2000_PCI_ADDR_EXT = 0x0001e000; + + if (!ixdp2x00_master_npu()) + ixdp2800_slave_disable_pci_master(); - *IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff; *IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff; + *IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff; ixp2000_pci_preinit(); + + if (ixdp2x00_master_npu()) { + /* + * Wait until the slave set its SRAM/SDRAM BAR sizes + * correctly before we proceed to scan and enumerate + * the bus. + */ + ixdp2800_master_wait_for_slave(); + + /* + * We configure the SDRAM BARs by hand because they + * are 1G and fall outside of the regular allocated + * PCI address space. + */ + *IXP2000_PCI_SDRAM_BAR = 0x00000008; + } else { + /* + * Wait for the master to complete scanning the bus + * and assigning resources before we proceed to scan + * the bus ourselves. Set pci=firmware to honor the + * master's resource assignment. + */ + ixdp2800_slave_wait_for_master_enable(); + pcibios_setup("firmware"); + } } -int ixdp2800_pci_setup(int nr, struct pci_sys_data *sys) +/* + * We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside + * of the regular PCI window, because there's only 512M of outbound PCI + * memory window on each IXP, while we need 1G for each of the BARs. + */ +static void __devinit ixp2800_pci_fixup(struct pci_dev *dev) +{ + if (machine_is_ixdp2800()) { + dev->resource[2].start = 0; + dev->resource[2].end = 0; + dev->resource[2].flags = 0; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup); + +static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys) { sys->mem_offset = 0x00000000; @@ -129,22 +212,47 @@ static int __init ixdp2800_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */ } -static void ixdp2800_pci_postinit(void) +static void __init ixdp2800_master_enable_slave(void) { - struct pci_dev *dev; + volatile u32 *addr; - if (ixdp2x00_master_npu()) { - dev = pci_find_slot(1, IXDP2800_SLAVE_ENET_DEVFN); - pci_remove_bus_device(dev); - } else { - dev = pci_find_slot(1, IXDP2800_MASTER_ENET_DEVFN); - pci_remove_bus_device(dev); + printk(KERN_INFO "IXDP2800: enabling slave NPU\n"); + + addr = (volatile u32 *)ixp2000_pci_config_addr(0, + IXDP2X00_SLAVE_NPU_DEVFN, + PCI_COMMAND); + + *addr |= PCI_COMMAND_MASTER; +} +static void __init ixdp2800_master_wait_for_slave_bus_scan(void) +{ + volatile u32 *addr; + + printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n"); + + addr = (volatile u32 *)ixp2000_pci_config_addr(0, + IXDP2X00_SLAVE_NPU_DEVFN, + PCI_COMMAND); + while ((*addr & PCI_COMMAND_MEMORY) == 0) + cpu_relax(); +} + +static void __init ixdp2800_slave_signal_bus_scan_completion(void) +{ + printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n"); + *IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY; +} + +static void __init ixdp2800_pci_postinit(void) +{ + if (!ixdp2x00_master_npu()) { ixdp2x00_slave_pci_postinit(); + ixdp2800_slave_signal_bus_scan_completion(); } } -struct hw_pci ixdp2800_pci __initdata = { +struct __initdata hw_pci ixdp2800_pci __initdata = { .nr_controllers = 1, .setup = ixdp2800_pci_setup, .preinit = ixdp2800_pci_preinit, @@ -155,8 +263,21 @@ struct hw_pci ixdp2800_pci __initdata = { int __init ixdp2800_pci_init(void) { - if (machine_is_ixdp2800()) + if (machine_is_ixdp2800()) { + struct pci_dev *dev; + pci_common_init(&ixdp2800_pci); + if (ixdp2x00_master_npu()) { + dev = pci_find_slot(1, IXDP2800_SLAVE_ENET_DEVFN); + pci_remove_bus_device(dev); + + ixdp2800_master_enable_slave(); + ixdp2800_master_wait_for_slave_bus_scan(); + } else { + dev = pci_find_slot(1, IXDP2800_MASTER_ENET_DEVFN); + pci_remove_bus_device(dev); + } + } return 0; } |
