summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/mips/Makefile4
-rw-r--r--arch/mips/au1000/common/pci.c8
-rw-r--r--arch/mips/au1000/common/setup.c2
-rw-r--r--arch/mips/au1000/common/time.c14
-rw-r--r--arch/mips/au1000/csb250/board_setup.c4
-rw-r--r--arch/mips/au1000/csb250/init.c2
-rw-r--r--arch/mips/au1000/db1x00/init.c2
-rw-r--r--arch/mips/au1000/hydrogen3/init.c2
-rw-r--r--arch/mips/au1000/pb1000/board_setup.c2
-rw-r--r--arch/mips/au1000/xxs1500/board_setup.c6
-rw-r--r--arch/mips/au1000/xxs1500/init.c2
-rw-r--r--arch/mips/au1000/xxs1500/irqmap.c2
-rw-r--r--arch/mips/ddb5xxx/ddb5477/irq.c6
-rw-r--r--arch/mips/ddb5xxx/ddb5477/setup.c22
-rw-r--r--arch/mips/dec/ecc-berr.c2
-rw-r--r--arch/mips/ite-boards/generic/it8172_setup.c2
-rw-r--r--arch/mips/ite-boards/generic/time.c16
-rw-r--r--arch/mips/kernel/binfmt_elfn32.c2
-rw-r--r--arch/mips/kernel/binfmt_elfo32.c2
-rw-r--r--arch/mips/kernel/cpu-bugs64.c4
-rw-r--r--arch/mips/kernel/gdb-stub.c12
-rw-r--r--arch/mips/kernel/genex.S4
-rw-r--r--arch/mips/kernel/ioctl32.c2
-rw-r--r--arch/mips/kernel/irq.c2
-rw-r--r--arch/mips/kernel/linux32.c22
-rw-r--r--arch/mips/kernel/r2300_switch.S4
-rw-r--r--arch/mips/kernel/r4k_switch.S4
-rw-r--r--arch/mips/kernel/signal32.c2
-rw-r--r--arch/mips/kernel/vmlinux.lds.S2
-rw-r--r--arch/mips/lasat/at93c.c16
-rw-r--r--arch/mips/lasat/at93c.h4
-rw-r--r--arch/mips/lasat/ds1603.c12
-rw-r--r--arch/mips/lasat/ds1603.h6
-rw-r--r--arch/mips/lasat/image/Makefile2
-rw-r--r--arch/mips/lasat/image/head.S2
-rw-r--r--arch/mips/lasat/interrupt.c4
-rw-r--r--arch/mips/lasat/lasat_board.c8
-rw-r--r--arch/mips/lasat/picvue.c12
-rw-r--r--arch/mips/lasat/picvue.h4
-rw-r--r--arch/mips/lasat/picvue_proc.c10
-rw-r--r--arch/mips/lasat/prom.c2
-rw-r--r--arch/mips/lasat/reset.c2
-rw-r--r--arch/mips/lasat/setup.c4
-rw-r--r--arch/mips/lasat/sysctl.c26
-rw-r--r--arch/mips/lib-32/Makefile2
-rw-r--r--arch/mips/lib-64/Makefile2
-rw-r--r--arch/mips/lib/memcpy.S4
-rw-r--r--arch/mips/mips-boards/atlas/atlas_int.c2
-rw-r--r--arch/mips/mips-boards/generic/init.c6
-rw-r--r--arch/mips/mips-boards/generic/time.c2
-rw-r--r--arch/mips/mips-boards/malta/malta_setup.c6
-rw-r--r--arch/mips/mm/c-r4k.c16
-rw-r--r--arch/mips/mm/c-sb1.c2
-rw-r--r--arch/mips/mm/cerr-sb1.c24
-rw-r--r--arch/mips/mm/dma-noncoherent.c10
-rw-r--r--arch/mips/mm/pg-sb1.c2
-rw-r--r--arch/mips/momentum/jaguar_atx/int-handler.S12
-rw-r--r--arch/mips/momentum/jaguar_atx/prom.c2
-rw-r--r--arch/mips/momentum/jaguar_atx/setup.c2
-rw-r--r--arch/mips/momentum/ocelot_c/int-handler.S8
-rw-r--r--arch/mips/momentum/ocelot_c/prom.c2
-rw-r--r--arch/mips/pci/fixup-ddb5074.c2
-rw-r--r--arch/mips/pci/fixup-ddb5477.c2
-rw-r--r--arch/mips/pci/fixup-malta.c2
-rw-r--r--arch/mips/pci/fixup-rbtx4927.c2
-rw-r--r--arch/mips/pci/fixup-sni.c2
-rw-r--r--arch/mips/pci/ops-ddb5477.c4
-rw-r--r--arch/mips/pci/ops-tx4927.c6
-rw-r--r--arch/mips/pci/pci-ddb5477.c8
-rw-r--r--arch/mips/pci/pci.c4
-rw-r--r--arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c14
-rw-r--r--arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h4
-rw-r--r--arch/mips/sgi-ip22/ip22-eisa.c2
-rw-r--r--arch/mips/sgi-ip22/ip22-hpc.c2
-rw-r--r--arch/mips/sgi-ip22/ip22-int.c12
-rw-r--r--arch/mips/sgi-ip22/ip22-nvram.c8
-rw-r--r--arch/mips/sgi-ip22/ip22-reset.c2
-rw-r--r--arch/mips/sgi-ip22/ip22-time.c2
-rw-r--r--arch/mips/sgi-ip27/ip27-memory.c2
-rw-r--r--arch/mips/sgi-ip32/ip32-reset.c2
-rw-r--r--arch/mips/sibyte/cfe/cfe_error.h10
-rw-r--r--arch/mips/sibyte/cfe/console.c2
-rw-r--r--arch/mips/sibyte/cfe/setup.c2
-rw-r--r--arch/mips/sibyte/cfe/smp.c2
-rw-r--r--arch/mips/sibyte/sb1250/bus_watcher.c6
-rw-r--r--arch/mips/sibyte/sb1250/irq.c4
-rw-r--r--arch/mips/sibyte/swarm/rtc_m41t81.c10
-rw-r--r--arch/mips/sibyte/swarm/setup.c2
-rw-r--r--arch/mips/sni/irq.c2
-rw-r--r--arch/mips/sni/setup.c2
-rw-r--r--arch/mips/tx4927/common/tx4927_irq_handler.S6
-rw-r--r--arch/mips/tx4927/common/tx4927_setup.c2
-rw-r--r--arch/mips/tx4927/toshiba_rbtx4927/Makefile6
-rw-r--r--arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c42
-rw-r--r--arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c2
-rw-r--r--arch/mips/vr41xx/common/vrc4173.c2
-rw-r--r--include/asm-mips/asmmacro.h4
-rw-r--r--include/asm-mips/bitops.h4
-rw-r--r--include/asm-mips/ddb5xxx/ddb5477.h6
-rw-r--r--include/asm-mips/fpregdef.h4
-rw-r--r--include/asm-mips/fpu.h8
-rw-r--r--include/asm-mips/ip32/mace.h8
-rw-r--r--include/asm-mips/lasat/serial.h4
-rw-r--r--include/asm-mips/mach-au1x00/au1000.h2
-rw-r--r--include/asm-mips/mach-db1x00/db1x00.h2
-rw-r--r--include/asm-mips/mach-jazz/floppy.h2
-rw-r--r--include/asm-mips/mach-pb1x00/pb1500.h4
-rw-r--r--include/asm-mips/r4kcache.h68
-rw-r--r--include/asm-mips/rtc.h2
-rw-r--r--include/asm-mips/sgi/gio.h2
-rw-r--r--include/asm-mips/sgi/hpc3.h4
-rw-r--r--include/asm-mips/sgi/ioc.h4
-rw-r--r--include/asm-mips/sgi/ip22.h2
-rw-r--r--include/asm-mips/sgi/mc.h6
-rw-r--r--include/asm-mips/sibyte/carmel.h12
-rw-r--r--include/asm-mips/sibyte/sb1250_defs.h38
-rw-r--r--include/asm-mips/sibyte/sb1250_dma.h42
-rw-r--r--include/asm-mips/sibyte/sb1250_genbus.h24
-rw-r--r--include/asm-mips/sibyte/sb1250_int.h24
-rw-r--r--include/asm-mips/sibyte/sb1250_l2c.h22
-rw-r--r--include/asm-mips/sibyte/sb1250_ldt.h32
-rw-r--r--include/asm-mips/sibyte/sb1250_mac.h26
-rw-r--r--include/asm-mips/sibyte/sb1250_mc.h28
-rw-r--r--include/asm-mips/sibyte/sb1250_regs.h68
-rw-r--r--include/asm-mips/sibyte/sb1250_scd.h36
-rw-r--r--include/asm-mips/sibyte/sb1250_smbus.h24
-rw-r--r--include/asm-mips/sibyte/sb1250_syncser.h12
-rw-r--r--include/asm-mips/sibyte/sb1250_uart.h30
-rw-r--r--include/asm-mips/sigcontext.h4
-rw-r--r--include/asm-mips/socket.h2
-rw-r--r--include/asm-mips/statfs.h2
-rw-r--r--include/asm-mips/titan_dep.h2
-rw-r--r--include/asm-mips/tx4927/tx4927.h52
-rw-r--r--include/asm-mips/tx4927/tx4927_pci.h4
-rw-r--r--include/asm-mips/vr41xx/vrc4173.h4
-rw-r--r--include/asm-mips/war.h4
-rw-r--r--include/asm-mips/xxs1500.h2
137 files changed, 596 insertions, 596 deletions
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index a33328ef86f7..d27b82595485 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -177,7 +177,7 @@ cflags-$(CONFIG_CPU_MIPS64) += \
cflags-$(CONFIG_CPU_R5000) += \
$(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \
- -Wa,--trap
+ -Wa,--trap
cflags-$(CONFIG_CPU_R5432) += \
$(call set_gccflags,r5400,mips4,r5000,mips4,mips2) \
@@ -720,7 +720,7 @@ archclean:
@$(MAKE) $(clean)=arch/mips/boot
@$(MAKE) $(clean)=arch/mips/lasat
-# Generate <asm/offset.h
+# Generate <asm/offset.h
#
# The default rule is suffering from funny problems on MIPS so we using our
# own ...
diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c
index 533721eef6ae..4e5a6e1a9a6e 100644
--- a/arch/mips/au1000/common/pci.c
+++ b/arch/mips/au1000/common/pci.c
@@ -40,14 +40,14 @@
/* TBD */
static struct resource pci_io_resource = {
- "pci IO space",
+ "pci IO space",
(u32)PCI_IO_START,
(u32)PCI_IO_END,
IORESOURCE_IO
};
static struct resource pci_mem_resource = {
- "pci memory space",
+ "pci memory space",
(u32)PCI_MEM_START,
(u32)PCI_MEM_END,
IORESOURCE_MEM
@@ -68,7 +68,7 @@ static unsigned long virt_io_addr;
static int __init au1x_pci_setup(void)
{
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
- virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START,
+ virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START,
Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1);
if (!virt_io_addr) {
@@ -77,7 +77,7 @@ static int __init au1x_pci_setup(void)
}
#ifdef CONFIG_DMA_NONCOHERENT
- /*
+ /*
* Set the NC bit in controller for Au1500 pre-AC silicon
*/
u32 prid = read_c0_prid();
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index dbc8b1bda963..eff89e109ce6 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -97,7 +97,7 @@ static int __init au1x00_setup(void)
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
-#endif
+#endif
#ifdef CONFIG_FB_AU1100
if ((argptr = strstr(argptr, "video=")) == NULL) {
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index fe418f1620c3..57675b41480e 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -281,7 +281,7 @@ unsigned long cal_r4koff(void)
cpu_speed = count * 2;
}
#else
- cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
+ cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
AU1000_SRC_CLK;
count = cpu_speed / 2;
#endif
@@ -356,7 +356,7 @@ static unsigned long do_fast_cp0_gettimeoffset(void)
: "hi", "lo", GCC_REG_ACCUM);
/*
- * Due to possible jiffies inconsistencies, we need to check
+ * Due to possible jiffies inconsistencies, we need to check
* the result so that we'll get a timer that is monotonic.
*/
if (res >= USECS_PER_JIFFY)
@@ -375,8 +375,8 @@ static unsigned long do_fast_pm_gettimeoffset(void)
au_sync();
offset = pc0 - last_pc0;
if (offset > 2*MATCH20_INC) {
- printk("huge offset %x, last_pc0 %x last_match20 %x pc0 %x\n",
- (unsigned)offset, (unsigned)last_pc0,
+ printk("huge offset %x, last_pc0 %x last_match20 %x pc0 %x\n",
+ (unsigned)offset, (unsigned)last_pc0,
(unsigned)last_match20, (unsigned)pc0);
}
offset = (unsigned long)((offset * 305) / 10);
@@ -394,11 +394,11 @@ void au1xxx_timer_setup(struct irqaction *irq)
r4k_offset = cal_r4koff();
printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
- //est_freq = 2*r4k_offset*HZ;
- est_freq = r4k_offset*HZ;
+ //est_freq = 2*r4k_offset*HZ;
+ est_freq = r4k_offset*HZ;
est_freq += 5000; /* round */
est_freq -= est_freq%10000;
- printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
+ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
(est_freq%1000000)*100/1000000);
set_au1x00_speed(est_freq);
set_au1x00_lcd_clock(); // program the LCD clock
diff --git a/arch/mips/au1000/csb250/board_setup.c b/arch/mips/au1000/csb250/board_setup.c
index 90426eaffb23..1c55c5f59d75 100644
--- a/arch/mips/au1000/csb250/board_setup.c
+++ b/arch/mips/au1000/csb250/board_setup.c
@@ -182,7 +182,7 @@ void __init board_setup(void)
au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
au_writel(0x02a00356, Au1500_PCI_STATCMD);
- au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
+ au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
au_writel(0x00000008, Au1500_PCI_MBAR);
au_sync();
@@ -216,7 +216,7 @@ csb250_pci_idsel(unsigned int devsel, int assert)
unsigned int gpio2_pins;
retval = 1;
-
+
/* First, disable both selects, then assert the one requested.
*/
au_writel(0xc000c000, GPIO2_OUTPUT);
diff --git a/arch/mips/au1000/csb250/init.c b/arch/mips/au1000/csb250/init.c
index 4320057fc439..bd99733abc0b 100644
--- a/arch/mips/au1000/csb250/init.c
+++ b/arch/mips/au1000/csb250/init.c
@@ -81,7 +81,7 @@ int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
csb_env[0] = env1;
mips_machgroup = MACH_GROUP_ALCHEMY;
- mips_machtype = MACH_CSB250;
+ mips_machtype = MACH_CSB250;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index 51eee94a5e82..4b9d5e46edbb 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -61,7 +61,7 @@ void __init prom_init(void)
prom_envp = (char **) fw_arg2;
mips_machgroup = MACH_GROUP_ALCHEMY;
- mips_machtype = MACH_DB1000; /* set the platform # */
+ mips_machtype = MACH_DB1000; /* set the platform # */
prom_init_cmdline();
diff --git a/arch/mips/au1000/hydrogen3/init.c b/arch/mips/au1000/hydrogen3/init.c
index eee4adf98711..8cc9879dd582 100644
--- a/arch/mips/au1000/hydrogen3/init.c
+++ b/arch/mips/au1000/hydrogen3/init.c
@@ -63,7 +63,7 @@ int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
prom_envp = envp;
mips_machgroup = MACH_GROUP_ALCHEMY;
- mips_machtype = MACH_DB1000; /* set the platform # */
+ mips_machtype = MACH_DB1000; /* set the platform # */
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c
index 2fa211b69329..0b4807dc9f44 100644
--- a/arch/mips/au1000/pb1000/board_setup.c
+++ b/arch/mips/au1000/pb1000/board_setup.c
@@ -174,7 +174,7 @@ void __init board_setup(void)
case 0x02: /* HB */
break;
default: /* HC and newer */
- /* Enable sys bus clock divider when IDLE state or no bus
+ /* Enable sys bus clock divider when IDLE state or no bus
activity. */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
break;
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c
index 9dadc82536f4..1e59433dfd66 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/au1000/xxs1500/board_setup.c
@@ -49,7 +49,7 @@ void board_reset (void)
void __init board_setup(void)
{
u32 pin_func;
-
+
// set multiple use pins (UART3/GPIO) to UART (it's used as UART too)
pin_func = au_readl(SYS_PINFUNC) & (u32)(~SYS_PF_UR3);
pin_func |= SYS_PF_UR3;
@@ -75,11 +75,11 @@ void __init board_setup(void)
au_writel(1, GPIO2_ENABLE);
/* gpio2 208/9/10/11 are inputs */
au_writel((1<<8) | (1<<9) | (1<<10) | (1<<11), GPIO2_DIR);
-
+
/* turn off power */
au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30), GPIO2_OUTPUT);
#endif
-
+
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c
index 03f755291b51..f1c76533b6fc 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/au1000/xxs1500/init.c
@@ -55,7 +55,7 @@ void __init prom_init(void)
prom_envp = (char **) fw_arg2;
mips_machgroup = MACH_GROUP_ALCHEMY;
- mips_machtype = MACH_XXS1500; /* set the platform # */
+ mips_machtype = MACH_XXS1500; /* set the platform # */
prom_init_cmdline();
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c
index 954800a0ab52..52f2f7daeb05 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/au1000/xxs1500/irqmap.c
@@ -56,7 +56,7 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
+ { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */
diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c
index 5f027bfa4af8..9ffe1a9142ca 100644
--- a/arch/mips/ddb5xxx/ddb5477/irq.c
+++ b/arch/mips/ddb5xxx/ddb5477/irq.c
@@ -76,7 +76,7 @@ set_pci_int_attr(u32 pci, u32 intn, u32 active, u32 trigger)
extern void vrc5477_irq_init(u32 base);
extern void mips_cpu_irq_init(u32 base);
extern asmlinkage void ddb5477_handle_int(void);
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
void __init arch_init_irq(void)
@@ -94,7 +94,7 @@ void __init arch_init_irq(void)
/* setup PCI interrupt attributes */
set_pci_int_attr(PCI0, INTA, ACTIVE_LOW, LEVEL_SENSE);
set_pci_int_attr(PCI0, INTB, ACTIVE_LOW, LEVEL_SENSE);
- if (mips_machtype == MACH_NEC_ROCKHOPPERII)
+ if (mips_machtype == MACH_NEC_ROCKHOPPERII)
set_pci_int_attr(PCI0, INTC, ACTIVE_HIGH, LEVEL_SENSE);
else
set_pci_int_attr(PCI0, INTC, ACTIVE_LOW, LEVEL_SENSE);
@@ -134,7 +134,7 @@ void __init arch_init_irq(void)
/* setup cascade interrupts */
setup_irq(VRC5477_IRQ_BASE + VRC5477_I8259_CASCADE, &irq_cascade);
- setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade);
+ setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade);
/* hook up the first-level interrupt handler */
set_except_vector(0, ddb5477_handle_int);
diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c
index 15c6e543b56f..d62f5a789b05 100644
--- a/arch/mips/ddb5xxx/ddb5477/setup.c
+++ b/arch/mips/ddb5xxx/ddb5477/setup.c
@@ -141,7 +141,7 @@ static void __init ddb_time_init(void)
/* mips_hpt_frequency is 1/2 of the cpu core freq */
i = (read_c0_config() >> 28 ) & 7;
- if ((current_cpu_data.cputype == CPU_R5432) && (i == 3))
+ if ((current_cpu_data.cputype == CPU_R5432) && (i == 3))
i = 4;
mips_hpt_frequency = bus_frequency*(i+4)/4;
}
@@ -298,11 +298,11 @@ static void __init ddb5477_board_init(void)
if (mips_machtype == MACH_NEC_ROCKHOPPER
|| mips_machtype == MACH_NEC_ROCKHOPPERII) {
- /* Disable bus diagnostics. */
+ /* Disable bus diagnostics. */
ddb_out32(DDB_PCICTL0_L, 0);
ddb_out32(DDB_PCICTL0_H, 0);
ddb_out32(DDB_PCICTL1_L, 0);
- ddb_out32(DDB_PCICTL1_H, 0);
+ ddb_out32(DDB_PCICTL1_H, 0);
}
if (mips_machtype == MACH_NEC_ROCKHOPPER) {
@@ -354,7 +354,7 @@ static void __init ddb5477_board_init(void)
*/
pci_write_config_byte(&dev_m1533, 0x58, 0x74);
- /*
+ /*
* positive decode (bit6 -0)
* enable IDE controler interrupt (bit 4 -1)
* setup SIRQ to point to IRQ 14 (bit 3:0 - 1101)
@@ -364,31 +364,31 @@ static void __init ddb5477_board_init(void)
/* Setup M5229 registers */
dev_m5229.bus = &bus;
dev_m5229.sysdata = NULL;
- dev_m5229.devfn = 4*8; // slot 4 (AD15): M5229 IDE
+ dev_m5229.devfn = 4*8; // slot 4 (AD15): M5229 IDE
/*
* enable IDE in the M5229 config register 0x50 (bit 0 - 1)
- * M5229 IDSEL is addr:15; see above setting
+ * M5229 IDSEL is addr:15; see above setting
*/
pci_read_config_byte(&dev_m5229, 0x50, &temp8);
pci_write_config_byte(&dev_m5229, 0x50, temp8 | 0x1);
- /*
- * enable bus master (bit 2) and IO decoding (bit 0)
+ /*
+ * enable bus master (bit 2) and IO decoding (bit 0)
*/
pci_read_config_byte(&dev_m5229, 0x04, &temp8);
pci_write_config_byte(&dev_m5229, 0x04, temp8 | 0x5);
/*
* enable native, copied from arch/ppc/k2boot/head.S
- * TODO - need volatile, need to be portable
+ * TODO - need volatile, need to be portable
*/
pci_write_config_byte(&dev_m5229, 0x09, 0xef);
- /* Set Primary Channel Command Block Timing */
+ /* Set Primary Channel Command Block Timing */
pci_write_config_byte(&dev_m5229, 0x59, 0x31);
- /*
+ /*
* Enable primary channel 40-pin cable
* M5229 register 0x4a (bit 0)
*/
diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c
index 133fb7c48e6c..6dbce92eb068 100644
--- a/arch/mips/dec/ecc-berr.c
+++ b/arch/mips/dec/ecc-berr.c
@@ -253,7 +253,7 @@ static inline void dec_kn03_be_init(void)
kn0x_erraddr = (void *)(KN03_SLOT_BASE + IOASIC_ERRADDR);
kn0x_chksyn = (void *)(KN03_SLOT_BASE + IOASIC_CHKSYN);
-
+
/*
* Set normal ECC detection and generation, enable ECC correction.
* For KN05 we also need to make sure EE (?) is enabled in the MB.
diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c
index d808a67294b8..a5f6d84bc181 100644
--- a/arch/mips/ite-boards/generic/it8172_setup.c
+++ b/arch/mips/ite-boards/generic/it8172_setup.c
@@ -129,7 +129,7 @@ static void __init it8172_setup(void)
/*
* IO/MEM resources.
- *
+ *
* revisit this area.
*/
set_io_port_base(KSEG1);
diff --git a/arch/mips/ite-boards/generic/time.c b/arch/mips/ite-boards/generic/time.c
index 30a6c0d5fc50..f5d67ee21ac6 100644
--- a/arch/mips/ite-boards/generic/time.c
+++ b/arch/mips/ite-boards/generic/time.c
@@ -72,7 +72,7 @@ static inline int rtc_dm_binary(void) { return saved_control & RTC_DM_BINARY; }
static inline unsigned char
bin_to_hw(unsigned char c)
{
- if (rtc_dm_binary())
+ if (rtc_dm_binary())
return c;
else
return ((c/10) << 4) + (c%10);
@@ -91,9 +91,9 @@ hw_to_bin(unsigned char c)
static inline unsigned char
hour_bin_to_hw(unsigned char c)
{
- if (rtc_24h())
+ if (rtc_24h())
return bin_to_hw(c);
- if (c >= 12)
+ if (c >= 12)
return 0x80 | bin_to_hw((c==12)?12:c-12); /* 12 is 12pm */
else
return bin_to_hw((c==0)?12:c); /* 0 is 12 AM, not 0 am */
@@ -105,9 +105,9 @@ hour_hw_to_bin(unsigned char c)
unsigned char tmp = hw_to_bin(c&0x3f);
if (rtc_24h())
return tmp;
- if (c & 0x80)
+ if (c & 0x80)
return (tmp==12)?12:tmp+12; /* 12pm is 12, not 24 */
- else
+ else
return (tmp==12)?0:tmp; /* 12am is 0 */
}
@@ -145,7 +145,7 @@ static unsigned long __init cal_r4koff(void)
return (mips_hpt_frequency / HZ);
}
-static unsigned long
+static unsigned long
it8172_rtc_get_time(void)
{
unsigned int year, mon, day, hour, min, sec;
@@ -166,12 +166,12 @@ it8172_rtc_get_time(void)
hour = hour_hw_to_bin(CMOS_READ(RTC_HOURS));
day = hw_to_bin(CMOS_READ(RTC_DAY_OF_MONTH));
mon = hw_to_bin(CMOS_READ(RTC_MONTH));
- year = hw_to_bin(CMOS_READ(RTC_YEAR)) +
+ year = hw_to_bin(CMOS_READ(RTC_YEAR)) +
hw_to_bin(*rtc_century_reg) * 100;
/* restore interrupts */
local_irq_restore(flags);
-
+
return mktime(year, mon, day, hour, min, sec);
}
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index ed47041f3030..6b645fbb1ddc 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -103,7 +103,7 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
* Convert jiffies to nanoseconds and seperate with
* one divide.
*/
- u64 nsec = (u64)jiffies * TICK_NSEC;
+ u64 nsec = (u64)jiffies * TICK_NSEC;
value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_usec);
value->tv_usec /= NSEC_PER_USEC;
}
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index ee21b18c37a8..b4075e99c452 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -105,7 +105,7 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
* Convert jiffies to nanoseconds and seperate with
* one divide.
*/
- u64 nsec = (u64)jiffies * TICK_NSEC;
+ u64 nsec = (u64)jiffies * TICK_NSEC;
value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_usec);
value->tv_usec /= NSEC_PER_USEC;
}
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index 11ebe5d4c446..47a087b6c11b 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -137,7 +137,7 @@ static inline void check_mult_sh(void)
for (i = 0; i < 8; i++)
if (v1[i] != w[i])
bug = 1;
-
+
if (bug == 0) {
printk("no.\n");
return;
@@ -149,7 +149,7 @@ static inline void check_mult_sh(void)
for (i = 0; i < 8; i++)
if (v2[i] != w[i])
fix = 0;
-
+
if (fix == 1) {
printk("yes.\n");
return;
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
index 269889302a27..d3fd1ab14274 100644
--- a/arch/mips/kernel/gdb-stub.c
+++ b/arch/mips/kernel/gdb-stub.c
@@ -687,8 +687,8 @@ void handle_exception (struct gdb_regs *regs)
* acquire the big kgdb spinlock
*/
if (!spin_trylock(&kgdb_lock)) {
- /*
- * some other CPU has the lock, we should go back to
+ /*
+ * some other CPU has the lock, we should go back to
* receive the gdb_wait IPC
*/
return;
@@ -703,7 +703,7 @@ void handle_exception (struct gdb_regs *regs)
async_bp.addr = 0;
}
- /*
+ /*
* acquire the CPU spinlocks
*/
for (i = num_online_cpus()-1; i >= 0; i--)
@@ -894,7 +894,7 @@ void handle_exception (struct gdb_regs *regs)
ptr = &input_buffer[1];
if (hexToLong(&ptr, &addr))
regs->cp0_epc = addr;
-
+
goto exit_kgdb_exception;
break;
@@ -1001,7 +1001,7 @@ void breakpoint(void)
return;
__asm__ __volatile__(
- ".globl breakinst\n\t"
+ ".globl breakinst\n\t"
".set\tnoreorder\n\t"
"nop\n"
"breakinst:\tbreak\n\t"
@@ -1014,7 +1014,7 @@ void breakpoint(void)
void async_breakpoint(void)
{
__asm__ __volatile__(
- ".globl async_breakinst\n\t"
+ ".globl async_breakinst\n\t"
".set\tnoreorder\n\t"
"nop\n"
"async_breakinst:\tbreak\n\t"
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 3a1a3e7586f6..9bb2caaf7fc6 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -246,10 +246,10 @@ NESTED(nmi_handler, PT_SIZE, sp)
LONG_L a1, PT_EPC(sp)
#if CONFIG_32BIT
PRINT("Got \nexception at %08lx\012")
-#endif
+#endif
#if CONFIG_64BIT
PRINT("Got \nexception at %016lx\012")
-#endif
+#endif
.endm
.macro __BUILD_count exception
diff --git a/arch/mips/kernel/ioctl32.c b/arch/mips/kernel/ioctl32.c
index 519cd5d0aebb..c069719ff0d8 100644
--- a/arch/mips/kernel/ioctl32.c
+++ b/arch/mips/kernel/ioctl32.c
@@ -27,7 +27,7 @@ long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg);
#include "compat_ioctl.c"
typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *);
-
+
#define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl)
#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL },
#define IOCTL_TABLE_START \
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 441157a1f994..7d93992e462c 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -77,7 +77,7 @@ int show_interrupts(struct seq_file *p, void *v)
if (i < NR_IRQS) {
spin_lock_irqsave(&irq_desc[i].lock, flags);
action = irq_desc[i].action;
- if (!action)
+ if (!action)
goto skip;
seq_printf(p, "%3d: ",i);
#ifndef CONFIG_SMP
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 993abc868e54..4613219dd73e 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -313,7 +313,7 @@ asmlinkage int sys32_sysinfo(struct sysinfo32 *info)
struct sysinfo s;
int ret, err;
mm_segment_t old_fs = get_fs ();
-
+
set_fs (KERNEL_DS);
ret = sys_sysinfo(&s);
set_fs (old_fs);
@@ -560,7 +560,7 @@ struct ipc64_perm32 {
compat_gid_t gid;
compat_uid_t cuid;
compat_gid_t cgid;
- compat_mode_t mode;
+ compat_mode_t mode;
unsigned short seq;
unsigned short __pad1;
unsigned int __unused1;
@@ -1334,17 +1334,17 @@ asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t *offset,
mm_segment_t old_fs = get_fs();
int ret;
off_t of;
-
+
if (offset && get_user(of, offset))
return -EFAULT;
-
+
set_fs(KERNEL_DS);
ret = sys_sendfile(out_fd, in_fd, offset ? &of : NULL, count);
set_fs(old_fs);
-
+
if (offset && put_user(of, offset))
return -EFAULT;
-
+
return ret;
}
@@ -1362,11 +1362,11 @@ static unsigned char socketcall_nargs[18]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
#undef AL
/*
- * System call vectors.
+ * System call vectors.
*
* Argument checking cleaned up. Saved 20% in size.
* This function doesn't need to set the kernel lock because
- * it is set by the callees.
+ * it is set by the callees.
*/
asmlinkage long sys32_socketcall(int call, unsigned int *args32)
@@ -1402,11 +1402,11 @@ asmlinkage long sys32_socketcall(int call, unsigned int *args32)
/* copy_from_user should be SMP safe. */
if (copy_from_user(a, args32, socketcall_nargs[call]))
return -EFAULT;
-
+
a0=a[0];
a1=a[1];
-
- switch(call)
+
+ switch(call)
{
case SYS_SOCKET:
err = sys_socket(a0,a1,a[2]);
diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S
index 243e7b629af6..f10019640ee9 100644
--- a/arch/mips/kernel/r2300_switch.S
+++ b/arch/mips/kernel/r2300_switch.S
@@ -35,7 +35,7 @@
/*
* FPU context is saved iff the process has used it's FPU in the current
* time slice as indicated by TIF_USEDFPU. In any case, the CU1 bit for user
- * space STATUS register should be 0, so that a process *always* starts its
+ * space STATUS register should be 0, so that a process *always* starts its
* userland with FPU disabled after each context switch.
*
* FPU will be enabled as soon as the process accesses FPU again, through
@@ -55,7 +55,7 @@ LEAF(resume)
cpu_save_nonscratch a0
sw ra, THREAD_REG31(a0)
- /*
+ /*
* check if we need to save FPU registers
*/
lw t3, TASK_THREAD_INFO(a0)
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index 175dd1fcbb33..e02b7722ccb8 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -33,7 +33,7 @@
/*
* FPU context is saved iff the process has used it's FPU in the current
* time slice as indicated by _TIF_USEDFPU. In any case, the CU1 bit for user
- * space STATUS register should be 0, so that a process *always* starts its
+ * space STATUS register should be 0, so that a process *always* starts its
* userland with FPU disabled after each context switch.
*
* FPU will be enabled as soon as the process accesses FPU again, through
@@ -164,7 +164,7 @@ LEAF(_init_fpu)
dmtc1 t1, $f31
1:
#endif
-
+
#ifdef CONFIG_CPU_MIPS32
mtc1 t1, $f0
mtc1 t1, $f1
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index f6875f023a29..8ddfbd8d425a 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -558,7 +558,7 @@ static inline int setup_sigcontext32(struct pt_regs *regs,
if (!used_math())
goto out;
- /*
+ /*
* Save FPU state to signal context. Signal handler will "inherit"
* current FPU state.
*/
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index e830d788c106..482ac310c937 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -15,7 +15,7 @@ SECTIONS
/* This is the value for an Origin kernel, taken from an IRIX kernel. */
/* . = 0xc00000000001c000; */
- /* Set the vaddr for the text segment to a value
+ /* Set the vaddr for the text segment to a value
>= 0xa800 0000 0001 9000 if no symmon is going to configured
>= 0xa800 0000 0030 0000 otherwise */
diff --git a/arch/mips/lasat/at93c.c b/arch/mips/lasat/at93c.c
index f6add041ebec..ca26e554615e 100644
--- a/arch/mips/lasat/at93c.c
+++ b/arch/mips/lasat/at93c.c
@@ -1,7 +1,7 @@
-/*
+/*
* Atmel AT93C46 serial eeprom driver
*
- * Brian Murphy <brian.murphy@eicon.com>
+ * Brian Murphy <brian.murphy@eicon.com>
*
*/
#include <linux/kernel.h>
@@ -21,12 +21,12 @@
struct at93c_defs *at93c;
-static void at93c_reg_write(u32 val)
+static void at93c_reg_write(u32 val)
{
*at93c->reg = val;
}
-static u32 at93c_reg_read(void)
+static u32 at93c_reg_read(void)
{
u32 tmp = *at93c->reg;
return tmp;
@@ -81,7 +81,7 @@ static u8 at93c_read_byte(void)
}
static void at93c_write_bits(u32 data, int size)
-{
+{
int i;
int shift = size - 1;
u32 mask = (1 << shift);
@@ -90,7 +90,7 @@ static void at93c_write_bits(u32 data, int size)
at93c_write_databit((data & mask) >> shift);
data <<= 1;
}
-}
+}
static void at93c_init_op(void)
{
@@ -104,8 +104,8 @@ static void at93c_end_op(void)
lasat_ndelay(250);
}
-static void at93c_wait(void)
-{
+static void at93c_wait(void)
+{
at93c_init_op();
while (!at93c_read_databit())
;
diff --git a/arch/mips/lasat/at93c.h b/arch/mips/lasat/at93c.h
index a912ac2171b0..cfe2f99b1d44 100644
--- a/arch/mips/lasat/at93c.h
+++ b/arch/mips/lasat/at93c.h
@@ -1,7 +1,7 @@
-/*
+/*
* Atmel AT93C46 serial eeprom driver
*
- * Brian Murphy <brian.murphy@eicon.com>
+ * Brian Murphy <brian.murphy@eicon.com>
*
*/
diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c
index 7bbf6cf923c9..9d7812e03dcd 100644
--- a/arch/mips/lasat/ds1603.c
+++ b/arch/mips/lasat/ds1603.c
@@ -1,7 +1,7 @@
-/*
- * Dallas Semiconductors 1603 RTC driver
+/*
+ * Dallas Semiconductors 1603 RTC driver
*
- * Brian Murphy <brian@murphy.dk>
+ * Brian Murphy <brian@murphy.dk>
*
*/
#include <linux/kernel.h>
@@ -20,12 +20,12 @@
struct ds_defs *ds1603 = NULL;
/* HW specific register functions */
-static void rtc_reg_write(unsigned long val)
+static void rtc_reg_write(unsigned long val)
{
*ds1603->reg = val;
}
-static unsigned long rtc_reg_read(void)
+static unsigned long rtc_reg_read(void)
{
unsigned long tmp = *ds1603->reg;
return tmp;
@@ -80,7 +80,7 @@ static unsigned int rtc_read_databit(void)
{
unsigned int data;
- data = (rtc_datareg_read() & (1 << ds1603->data_read_shift))
+ data = (rtc_datareg_read() & (1 << ds1603->data_read_shift))
>> ds1603->data_read_shift;
rtc_cycle_clock(rtc_reg_read());
return data;
diff --git a/arch/mips/lasat/ds1603.h b/arch/mips/lasat/ds1603.h
index 55f3b0423c20..c2e5c76a379d 100644
--- a/arch/mips/lasat/ds1603.h
+++ b/arch/mips/lasat/ds1603.h
@@ -1,7 +1,7 @@
-/*
- * Dallas Semiconductors 1603 RTC driver
+/*
+ * Dallas Semiconductors 1603 RTC driver
*
- * Brian Murphy <brian@murphy.dk>
+ * Brian Murphy <brian@murphy.dk>
*
*/
#ifndef __DS1603_H
diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile
index 18b6430f11be..35ecd6483ef6 100644
--- a/arch/mips/lasat/image/Makefile
+++ b/arch/mips/lasat/image/Makefile
@@ -21,7 +21,7 @@ LDSCRIPT= -L$(obj) -Tromscript.normal
HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \
-D_kernel_entry=0x$(KERNEL_ENTRY) \
-D VERSION="\"$(Version)\"" \
- -D TIMESTAMP=$(shell date +%s)
+ -D TIMESTAMP=$(shell date +%s)
$(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE)
$(CC) -fno-pic $(HEAD_DEFINES) -I$(TOPDIR)/include -c -o $@ $<
diff --git a/arch/mips/lasat/image/head.S b/arch/mips/lasat/image/head.S
index 426bd7de17bb..efb95f2609c2 100644
--- a/arch/mips/lasat/image/head.S
+++ b/arch/mips/lasat/image/head.S
@@ -27,5 +27,5 @@ reldate:
.word TIMESTAMP
.org 0x50
-release:
+release:
.string VERSION
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index 1148a2d20aa7..c90da1639440 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -15,7 +15,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
- * Routines for generic manipulation of the interrupts found on the
+ * Routines for generic manipulation of the interrupts found on the
* Lasat boards.
*/
#include <linux/init.h>
@@ -101,7 +101,7 @@ static unsigned long get_int_status_100(void)
return *lasat_int_status & *lasat_int_mask;
}
-static unsigned long get_int_status_200(void)
+static unsigned long get_int_status_200(void)
{
unsigned long int_status;
diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c
index 8c784bcf1111..fc9b0e2a6be1 100644
--- a/arch/mips/lasat/lasat_board.c
+++ b/arch/mips/lasat/lasat_board.c
@@ -67,7 +67,7 @@ static void init_flash_sizes(void)
if (mips_machtype == MACH_LASAT_100) {
lasat_board_info.li_flash_base = 0x1e000000;
-
+
lb[LASAT_MTD_BOOTLOADER] = 0x1e400000;
if (lasat_board_info.li_flash_size > 0x200000) {
@@ -103,7 +103,7 @@ int lasat_init_board_info(void)
memset(&lasat_board_info, 0, sizeof(lasat_board_info));
/* First read the EEPROM info */
- EEPROMRead(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
+ EEPROMRead(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
sizeof(struct lasat_eeprom_struct));
/* Check the CRC */
@@ -188,7 +188,7 @@ int lasat_init_board_info(void)
case 0x1:
lasat_board_info.li_cpu_hz =
lasat_board_info.li_bus_hz +
- (lasat_board_info.li_bus_hz >> 1);
+ (lasat_board_info.li_bus_hz >> 1);
break;
case 0x2:
lasat_board_info.li_cpu_hz =
@@ -271,7 +271,7 @@ void lasat_write_eeprom_info(void)
lasat_board_info.li_eeprom_info.crc32 = crc;
/* Write the EEPROM info */
- EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
+ EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
sizeof(struct lasat_eeprom_struct));
}
diff --git a/arch/mips/lasat/picvue.c b/arch/mips/lasat/picvue.c
index 5637cd153926..9ae82c3ffb07 100644
--- a/arch/mips/lasat/picvue.c
+++ b/arch/mips/lasat/picvue.c
@@ -1,7 +1,7 @@
-/*
+/*
* Picvue PVC160206 display driver
*
- * Brian Murphy <brian@murphy.dk>
+ * Brian Murphy <brian@murphy.dk>
*
*/
#include <linux/kernel.h>
@@ -24,12 +24,12 @@ struct pvc_defs *picvue = NULL;
DECLARE_MUTEX(pvc_sem);
-static void pvc_reg_write(u32 val)
+static void pvc_reg_write(u32 val)
{
*picvue->reg = val;
}
-static u32 pvc_reg_read(void)
+static u32 pvc_reg_read(void)
{
u32 tmp = *picvue->reg;
return tmp;
@@ -65,12 +65,12 @@ static u8 pvc_read_data(void)
{
u32 data = pvc_reg_read();
u8 byte;
- data |= picvue->rw;
+ data |= picvue->rw;
data &= ~picvue->rs;
pvc_reg_write(data);
ndelay(40);
byte = pvc_read_byte(data);
- data |= picvue->rs;
+ data |= picvue->rs;
pvc_reg_write(data);
return byte;
}
diff --git a/arch/mips/lasat/picvue.h b/arch/mips/lasat/picvue.h
index 74a39039135d..2a96bf971897 100644
--- a/arch/mips/lasat/picvue.h
+++ b/arch/mips/lasat/picvue.h
@@ -1,7 +1,7 @@
-/*
+/*
* Picvue PVC160206 display driver
*
- * Brian Murphy <brian.murphy@eicon.com>
+ * Brian Murphy <brian.murphy@eicon.com>
*
*/
#include <asm/semaphore.h>
diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c
index eaa2b4625124..cce7cddcdb08 100644
--- a/arch/mips/lasat/picvue_proc.c
+++ b/arch/mips/lasat/picvue_proc.c
@@ -1,7 +1,7 @@
-/*
+/*
* Picvue PVC160206 display driver
*
- * Brian Murphy <brian.murphy@eicon.com>
+ * Brian Murphy <brian.murphy@eicon.com>
*
*/
#include <linux/kernel.h>
@@ -51,10 +51,10 @@ static int pvc_proc_read_line(char *page, char **start,
page += sprintf(page, "%s\n", pvc_lines[lineno]);
up(&pvc_sem);
- return page - origpage;
+ return page - origpage;
}
-static int pvc_proc_write_line(struct file *file, const char *buffer,
+static int pvc_proc_write_line(struct file *file, const char *buffer,
unsigned long count, void *data)
{
int origcount = count;
@@ -119,7 +119,7 @@ static int pvc_proc_read_scroll(char *page, char **start,
page += sprintf(page, "%d\n", scroll_dir * scroll_interval);
up(&pvc_sem);
- return page - origpage;
+ return page - origpage;
}
diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c
index ca62881c9e52..88c7ab871ec4 100644
--- a/arch/mips/lasat/prom.c
+++ b/arch/mips/lasat/prom.c
@@ -42,7 +42,7 @@ static void null_prom_putc(char c)
/* these are functions provided by the bootloader */
static void (* prom_putc)(char c) = null_prom_putc;
void (* prom_printf)(const char * fmt, ...) = null_prom_printf;
-void (* prom_display)(const char *string, int pos, int clear) =
+void (* prom_display)(const char *string, int pos, int clear) =
null_prom_display;
void (* prom_monitor)(void) = null_prom_monitor;
diff --git a/arch/mips/lasat/reset.c b/arch/mips/lasat/reset.c
index 37e4912ee1c8..8d7d7a454f9a 100644
--- a/arch/mips/lasat/reset.c
+++ b/arch/mips/lasat/reset.c
@@ -1,4 +1,4 @@
-/*
+/*
* Thomas Horsten <thh@lasat.com>
* Copyright (C) 2000 LASAT Networks A/S.
*
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index e371ed5cbe34..f2604fab9a99 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -105,7 +105,7 @@ static int lasat_panic_prom_monitor(struct notifier_block *this,
return NOTIFY_DONE;
}
-static struct notifier_block lasat_panic_block[] =
+static struct notifier_block lasat_panic_block[] =
{
{ lasat_panic_display, NULL, INT_MAX },
{ lasat_panic_prom_monitor, NULL, INT_MIN }
@@ -120,7 +120,7 @@ static void lasat_timer_setup(struct irqaction *irq)
{
write_c0_compare(
- read_c0_count() +
+ read_c0_count() +
mips_hpt_frequency / HZ);
change_c0_status(ST0_IM, IE_IRQ0 | IE_IRQ5);
}
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index 1c0cc620a43f..8ff43a1c1e99 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -37,14 +37,14 @@
static DECLARE_MUTEX(lasat_info_sem);
-/* Strategy function to write EEPROM after changing string entry */
+/* Strategy function to write EEPROM after changing string entry */
int sysctl_lasatstring(ctl_table *table, int *name, int nlen,
void *oldval, size_t *oldlenp,
void *newval, size_t newlen, void **context)
{
int r;
down(&lasat_info_sem);
- r = sysctl_string(table, name,
+ r = sysctl_string(table, name,
nlen, oldval, oldlenp, newval, newlen, context);
if (r < 0) {
up(&lasat_info_sem);
@@ -74,7 +74,7 @@ int proc_dolasatstring(ctl_table *table, int write, struct file *filp,
return 0;
}
-/* proc function to write EEPROM after changing int entry */
+/* proc function to write EEPROM after changing int entry */
int proc_dolasatint(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp, loff_t *ppos)
{
@@ -93,7 +93,7 @@ int proc_dolasatint(ctl_table *table, int write, struct file *filp,
static int rtctmp;
#ifdef CONFIG_DS1603
-/* proc function to read/write RealTime Clock */
+/* proc function to read/write RealTime Clock */
int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp, loff_t *ppos)
{
@@ -165,9 +165,9 @@ static char lasat_bcastaddr[16];
void update_bcastaddr(void)
{
unsigned int ip;
-
- ip = (lasat_board_info.li_eeprom_info.ipaddr &
- lasat_board_info.li_eeprom_info.netmask) |
+
+ ip = (lasat_board_info.li_eeprom_info.ipaddr &
+ lasat_board_info.li_eeprom_info.netmask) |
~lasat_board_info.li_eeprom_info.netmask;
sprintf(lasat_bcastaddr, "%d.%d.%d.%d",
@@ -205,7 +205,7 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
break;
len++;
}
- if (len >= sizeof(proc_lasat_ipbuf)-1)
+ if (len >= sizeof(proc_lasat_ipbuf)-1)
len = sizeof(proc_lasat_ipbuf) - 1;
if (copy_from_user(proc_lasat_ipbuf, buffer, len))
{
@@ -249,8 +249,8 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
}
#endif /* defined(CONFIG_INET) */
-static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen,
- void *oldval, size_t *oldlenp,
+static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen,
+ void *oldval, size_t *oldlenp,
void *newval, size_t newlen,
void **context)
{
@@ -293,7 +293,7 @@ int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp,
if (!strcmp(filp->f_dentry->d_name.name, "debugaccess"))
lasat_board_info.li_eeprom_info.debugaccess = lasat_board_info.li_debugaccess;
}
- lasat_write_eeprom_info();
+ lasat_write_eeprom_info();
up(&lasat_info_sem);
return 0;
}
@@ -316,8 +316,8 @@ static ctl_table lasat_table[] = {
0644, NULL, &proc_lasat_ip, &sysctl_lasat_intvec},
{LASAT_NETMASK, "netmask", &lasat_board_info.li_eeprom_info.netmask, sizeof(int),
0644, NULL, &proc_lasat_ip, &sysctl_lasat_intvec},
- {LASAT_BCAST, "bcastaddr", &lasat_bcastaddr,
- sizeof(lasat_bcastaddr), 0600, NULL,
+ {LASAT_BCAST, "bcastaddr", &lasat_bcastaddr,
+ sizeof(lasat_bcastaddr), 0600, NULL,
&proc_dostring, &sysctl_string},
#endif
{LASAT_PASSWORD, "passwd_hash", &lasat_board_info.li_eeprom_info.passwd_hash, sizeof(lasat_board_info.li_eeprom_info.passwd_hash),
diff --git a/arch/mips/lib-32/Makefile b/arch/mips/lib-32/Makefile
index fd6a2bafdfcf..ad285786e74b 100644
--- a/arch/mips/lib-32/Makefile
+++ b/arch/mips/lib-32/Makefile
@@ -2,7 +2,7 @@
# Makefile for MIPS-specific library files..
#
-lib-y += csum_partial.o memset.o watch.o
+lib-y += csum_partial.o memset.o watch.o
obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o
obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o
diff --git a/arch/mips/lib-64/Makefile b/arch/mips/lib-64/Makefile
index fd6a2bafdfcf..ad285786e74b 100644
--- a/arch/mips/lib-64/Makefile
+++ b/arch/mips/lib-64/Makefile
@@ -2,7 +2,7 @@
# Makefile for MIPS-specific library files..
#
-lib-y += csum_partial.o memset.o watch.o
+lib-y += csum_partial.o memset.o watch.o
obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o
obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index 00d73be7dc27..90ee8d43261f 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -101,7 +101,7 @@
#define NBYTES 8
#define LOG_NBYTES 3
-/*
+/*
* As we are sharing code base with the mips32 tree (which use the o32 ABI
* register definitions). We need to redefine the register definitions from
* the n64 ABI register naming to the o32 ABI register naming.
@@ -118,7 +118,7 @@
#define t5 $13
#define t6 $14
#define t7 $15
-
+
#else
#define LOAD lw
diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c
index 8f1d875217a2..19d4b0792460 100644
--- a/arch/mips/mips-boards/atlas/atlas_int.c
+++ b/arch/mips/mips-boards/atlas/atlas_int.c
@@ -122,7 +122,7 @@ void __init arch_init_irq(void)
int i;
atlas_hw0_icregs = (struct atlas_ictrl_regs *)ioremap (ATLAS_ICTRL_REGS_BASE, sizeof(struct atlas_ictrl_regs *));
-
+
/*
* Mask out all interrupt by writing "1" to all bit position in
* the interrupt reset reg.
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c
index 31caf0603a3f..311155d1d3ed 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mips-boards/generic/init.c
@@ -200,7 +200,7 @@ void __init kgdb_config (void)
generic_putDebugChar = saa9730_putDebugChar;
generic_getDebugChar = saa9730_getDebugChar;
}
- else
+ else
#endif
{
speed = rs_kgdb_hook(line, speed);
@@ -243,7 +243,7 @@ void __init prom_init(void)
mips_revision_corid = MIPS_REVISION_CORID;
if (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL) {
- if (BONITO_PCIDID == 0x0001df53 ||
+ if (BONITO_PCIDID == 0x0001df53 ||
BONITO_PCIDID == 0x0003df53)
mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_BON;
else
@@ -310,7 +310,7 @@ void __init prom_init(void)
case MIPS_REVISION_CORID_CORE_MSC:
case MIPS_REVISION_CORID_CORE_FPGA2:
case MIPS_REVISION_CORID_CORE_EMUL_MSC:
- _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000);
+ _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000);
#ifdef CONFIG_CPU_LITTLE_ENDIAN
MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP);
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index fe7fc17305a6..16315444dd5a 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -89,7 +89,7 @@ static unsigned int __init estimate_cpu_frequency(void)
* really calculate the timer frequency
* For now we hardwire the SEAD board frequency to 12MHz.
*/
-
+
if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) ||
(prid == (PRID_COMP_MIPS | PRID_IMP_25KF)))
count = 12000000;
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c
index 3377e66de9eb..df6db6419ae9 100644
--- a/arch/mips/mips-boards/malta/malta_setup.c
+++ b/arch/mips/mips-boards/malta/malta_setup.c
@@ -149,15 +149,15 @@ static int __init malta_setup(void)
argptr = prom_getcmdline();
if (strstr(argptr, "iobcuncached")) {
BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN;
- BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG &
+ BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG &
~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
printk("Disabled Bonito IOBC coherency\n");
}
else {
BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN;
- BONITO_PCIMEMBASECFG |=
- (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
+ BONITO_PCIMEMBASECFG |=
+ (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
printk("Disabled Bonito IOBC coherency\n");
}
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 20d40725e5bb..5ea84bc98c6a 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -126,13 +126,13 @@ static inline void tx49_blast_icache32(void)
CACHE32_UNROLL32_ALIGN2;
/* I'm in even chunk. blast odd chunks */
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start + 0x400; addr < end; addr += 0x400 * 2)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start + 0x400; addr < end; addr += 0x400 * 2)
cache32_unroll32(addr|ws,Index_Invalidate_I);
CACHE32_UNROLL32_ALIGN;
/* I'm in odd chunk. blast even chunks */
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400 * 2)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start; addr < end; addr += 0x400 * 2)
cache32_unroll32(addr|ws,Index_Invalidate_I);
}
@@ -156,13 +156,13 @@ static inline void tx49_blast_icache32_page_indexed(unsigned long page)
CACHE32_UNROLL32_ALIGN2;
/* I'm in even chunk. blast odd chunks */
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start + 0x400; addr < end; addr += 0x400 * 2)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start + 0x400; addr < end; addr += 0x400 * 2)
cache32_unroll32(addr|ws,Index_Invalidate_I);
CACHE32_UNROLL32_ALIGN;
/* I'm in odd chunk. blast even chunks */
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400 * 2)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start; addr < end; addr += 0x400 * 2)
cache32_unroll32(addr|ws,Index_Invalidate_I);
}
diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c
index ab30afd63b32..502f68c664b2 100644
--- a/arch/mips/mm/c-sb1.c
+++ b/arch/mips/mm/c-sb1.c
@@ -270,7 +270,7 @@ static void local_sb1_flush_icache_range(unsigned long start,
__sb1_writeback_inv_dcache_all();
else
__sb1_writeback_inv_dcache_range(start, end);
-
+
/* Just flush the whole icache if the range is big enough */
if ((end - start) > icache_range_cutoff)
__sb1_flush_icache_all();
diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c
index 13d96d62764e..7166ffe63502 100644
--- a/arch/mips/mm/cerr-sb1.c
+++ b/arch/mips/mm/cerr-sb1.c
@@ -25,7 +25,7 @@
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_scd.h>
#endif
-
+
/* SB1 definitions */
/* XXX should come from config1 XXX */
@@ -136,14 +136,14 @@ static inline void breakout_cerrd(unsigned int val)
#ifndef CONFIG_SIBYTE_BUS_WATCHER
-static void check_bus_watcher(void)
-{
+static void check_bus_watcher(void)
+{
uint32_t status, l2_err, memio_err;
/* Destructive read, clears register and interrupt */
status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
/* Bit 31 is always on, but there's no #define for that */
- if (status & ~(1UL << 31)) {
+ if (status & ~(1UL << 31)) {
l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
prom_printf("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
@@ -153,14 +153,14 @@ static void check_bus_watcher(void)
(int)(G_SCD_BERR_TID(status) >> 6),
(int)G_SCD_BERR_RID(status),
(int)G_SCD_BERR_DCODE(status));
- } else {
- prom_printf("Bus watcher indicates no error\n");
- }
-}
-#else
-extern void check_bus_watcher(void);
-#endif
-
+ } else {
+ prom_printf("Bus watcher indicates no error\n");
+ }
+}
+#else
+extern void check_bus_watcher(void);
+#endif
+
asmlinkage void sb1_cache_error(void)
{
uint64_t cerr_dpa;
diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c
index 9895e32b0fce..59e54f12212e 100644
--- a/arch/mips/mm/dma-noncoherent.c
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -162,7 +162,7 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
for (i = 0; i < nents; i++, sg++) {
unsigned long addr;
-
+
addr = (unsigned long) page_address(sg->page);
if (addr)
__dma_sync(addr + sg->offset, sg->length, direction);
@@ -230,9 +230,9 @@ void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
unsigned long addr;
-
+
BUG_ON(direction == DMA_NONE);
-
+
addr = dma_handle + PAGE_OFFSET;
__dma_sync(addr, size, direction);
}
@@ -282,9 +282,9 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
enum dma_data_direction direction)
{
int i;
-
+
BUG_ON(direction == DMA_NONE);
-
+
/* Make sure that gcc doesn't leave the empty loop body. */
for (i = 0; i < nelems; i++, sg++)
__dma_sync((unsigned long)page_address(sg->page),
diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c
index b63e1ca350f5..1b6df7133c1e 100644
--- a/arch/mips/mm/pg-sb1.c
+++ b/arch/mips/mm/pg-sb1.c
@@ -198,7 +198,7 @@ static inline void copy_page_cpu(void *to, void *from)
/*
* Pad descriptors to cacheline, since each is exclusively owned by a
- * particular CPU.
+ * particular CPU.
*/
typedef struct dmadscr_s {
u64 dscr_a;
diff --git a/arch/mips/momentum/jaguar_atx/int-handler.S b/arch/mips/momentum/jaguar_atx/int-handler.S
index 43fd5a58077c..55bc789733f2 100644
--- a/arch/mips/momentum/jaguar_atx/int-handler.S
+++ b/arch/mips/momentum/jaguar_atx/int-handler.S
@@ -27,11 +27,11 @@
SAVE_ALL
CLI
.set at
- mfc0 t0, CP0_CAUSE
+ mfc0 t0, CP0_CAUSE
mfc0 t2, CP0_STATUS
and t0, t2
-
+
andi t1, t0, STATUSF_IP0 /* sw0 software interrupt */
bnez t1, ll_sw0_irq
andi t1, t0, STATUSF_IP1 /* sw1 software interrupt */
@@ -103,25 +103,25 @@ ll_pcia_irq:
move a1, sp
jal do_IRQ
j ret_from_irq
-
+
ll_pcib_irq:
li a0, 5
move a1, sp
jal do_IRQ
j ret_from_irq
-
+
ll_uart_irq:
li a0, 6
move a1, sp
jal do_IRQ
j ret_from_irq
-
+
ll_cputimer_irq:
li a0, 7
move a1, sp
jal ll_timer_interrupt
j ret_from_irq
-
+
ll_mv64340_decode_irq:
move a0, sp
jal ll_mv64340_irq
diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c
index 827960802b8f..14ae2e713585 100644
--- a/arch/mips/momentum/jaguar_atx/prom.c
+++ b/arch/mips/momentum/jaguar_atx/prom.c
@@ -64,7 +64,7 @@ static u8 exchange_bit(u8 val, u8 cs)
/* turn the clock off and read-strobe */
JAGUAR_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-
+
/* return the data */
return ((JAGUAR_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
}
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
index 3cf1e46aa4b8..90288cf2b1e0 100644
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ b/arch/mips/momentum/jaguar_atx/setup.c
@@ -451,7 +451,7 @@ static int __init momenco_jaguar_atx_setup(void)
#ifdef GEMDEBUG_TRACEBUFFER
{
unsigned int tbControl;
- tbControl =
+ tbControl =
0 << 26 | /* post trigger delay 0 */
0x2 << 16 | /* sequential trace mode */
// 0x0 << 16 | /* non-sequential trace mode */
diff --git a/arch/mips/momentum/ocelot_c/int-handler.S b/arch/mips/momentum/ocelot_c/int-handler.S
index 2f2430648abc..52349d9bf1be 100644
--- a/arch/mips/momentum/ocelot_c/int-handler.S
+++ b/arch/mips/momentum/ocelot_c/int-handler.S
@@ -27,11 +27,11 @@
SAVE_ALL
CLI
.set at
- mfc0 t0, CP0_CAUSE
+ mfc0 t0, CP0_CAUSE
mfc0 t2, CP0_STATUS
and t0, t2
-
+
andi t1, t0, STATUSF_IP0 /* sw0 software interrupt */
bnez t1, ll_sw0_irq
andi t1, t0, STATUSF_IP1 /* sw1 software interrupt */
@@ -83,7 +83,7 @@ ll_pmc_irq:
move a1, sp
jal do_IRQ
j ret_from_irq
-
+
ll_cpci_decode_irq:
move a0, sp
jal ll_cpci_irq
@@ -99,4 +99,4 @@ ll_cputimer_irq:
move a1, sp
jal do_IRQ
j ret_from_irq
-
+
diff --git a/arch/mips/momentum/ocelot_c/prom.c b/arch/mips/momentum/ocelot_c/prom.c
index 375877aebcf6..5b6809724b15 100644
--- a/arch/mips/momentum/ocelot_c/prom.c
+++ b/arch/mips/momentum/ocelot_c/prom.c
@@ -67,7 +67,7 @@ static u8 exchange_bit(u8 val, u8 cs)
/* turn the clock off and read-strobe */
OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-
+
/* return the data */
return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
}
diff --git a/arch/mips/pci/fixup-ddb5074.c b/arch/mips/pci/fixup-ddb5074.c
index b345e528a53c..5a4a7c239c42 100644
--- a/arch/mips/pci/fixup-ddb5074.c
+++ b/arch/mips/pci/fixup-ddb5074.c
@@ -5,7 +5,7 @@ static void ddb5074_fixup(struct pci_dev *dev)
{
extern struct pci_dev *pci_pmu;
u8 t8;
-
+
pci_pmu = dev; /* for LEDs D2 and D3 */
/* Program the lines for LEDs D2 and D3 to output */
pci_read_config_byte(dev, 0x7d, &t8);
diff --git a/arch/mips/pci/fixup-ddb5477.c b/arch/mips/pci/fixup-ddb5477.c
index 6abdc88bab1e..2f1444e60654 100644
--- a/arch/mips/pci/fixup-ddb5477.c
+++ b/arch/mips/pci/fixup-ddb5477.c
@@ -65,7 +65,7 @@ static void ddb5477_amd_lance_fixup(struct pci_dev *dev)
ioaddr = pci_resource_start(dev, 0);
inw(ioaddr + PCNET32_WIO_RESET); /* reset chip */
-
+
/* bcr_18 |= 0x0800 */
outw(18, ioaddr + PCNET32_WIO_RAP);
temp = inw(ioaddr + PCNET32_WIO_BDP);
diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c
index b9296d9942b3..bf2c41d1e9c5 100644
--- a/arch/mips/pci/fixup-malta.c
+++ b/arch/mips/pci/fixup-malta.c
@@ -56,7 +56,7 @@ static void __init malta_piix_func0_fixup(struct pci_dev *pdev)
0, 0, 0, 3,
4, 5, 6, 7,
0, 9, 10, 11,
- 12, 0, 14, 15
+ 12, 0, 14, 15
};
int i;
diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c
index de4e443da208..ceeb1860895a 100644
--- a/arch/mips/pci/fixup-rbtx4927.c
+++ b/arch/mips/pci/fixup-rbtx4927.c
@@ -7,7 +7,7 @@
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
- * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2000-2001 Toshiba Corporation
*
* Copyright (C) 2004 MontaVista Software Inc.
* Author: Manish Lachwani (mlachwani@mvista.com)
diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c
index c8ef01a017cc..a176f2ca8656 100644
--- a/arch/mips/pci/fixup-sni.c
+++ b/arch/mips/pci/fixup-sni.c
@@ -32,7 +32,7 @@
* Device 4: Unused
* Device 5: Slot 2
* Device 6: Slot 3
- * Device 7: Slot 4
+ * Device 7: Slot 4
*
* Documentation says the VGA is device 5 and device 3 is unused but that
* seem to be a documentation error. At least on my RM200C the Cirrus
diff --git a/arch/mips/pci/ops-ddb5477.c b/arch/mips/pci/ops-ddb5477.c
index e955443fedf9..0406b50a37d8 100644
--- a/arch/mips/pci/ops-ddb5477.c
+++ b/arch/mips/pci/ops-ddb5477.c
@@ -127,7 +127,7 @@ static inline void ddb_close_config_base(struct pci_config_swap *swap)
}
static int read_config_dword(struct pci_config_swap *swap,
- struct pci_bus *bus, u32 devfn, u32 where,
+ struct pci_bus *bus, u32 devfn, u32 where,
u32 * val)
{
u32 bus_num, slot_num, func_num;
@@ -153,7 +153,7 @@ static int read_config_dword(struct pci_config_swap *swap,
}
static int read_config_word(struct pci_config_swap *swap,
- struct pci_bus *bus, u32 devfn, u32 where,
+ struct pci_bus *bus, u32 devfn, u32 where,
u16 * val)
{
int status;
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index 2a9d7227fe87..7688b7711329 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -1,16 +1,16 @@
/*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
- * ahennessy@mvista.com
+ * ahennessy@mvista.com
*
- * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2000-2001 Toshiba Corporation
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
* Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c
*
* Define the pci_ops for the Toshiba rbtx4927
*
- * Much of the code is derived from the original DDB5074 port by
+ * Much of the code is derived from the original DDB5074 port by
* Geert Uytterhoeven <geert@sonycom.com>
*
* Copyright 2004 MontaVista Software Inc.
diff --git a/arch/mips/pci/pci-ddb5477.c b/arch/mips/pci/pci-ddb5477.c
index 4ddd53eaf656..826d653184e5 100644
--- a/arch/mips/pci/pci-ddb5477.c
+++ b/arch/mips/pci/pci-ddb5477.c
@@ -76,7 +76,7 @@ struct pci_controller ddb5477_io_controller = {
*/
/*
- * irq mapping : device -> pci int # -> vrc4377 irq# ,
+ * irq mapping : device -> pci int # -> vrc4377 irq# ,
* ddb5477 board manual page 4 and vrc5477 manual page 46
*/
@@ -137,9 +137,9 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
unsigned char *slot_irq_map;
unsigned char irq;
- /*
+ /*
* We ignore the swizzled slot and pin values. The original
- * pci_fixup_irq() codes largely base irq number on the dev slot
+ * pci_fixup_irq() codes largely base irq number on the dev slot
* numbers because except for one case they are unique even
* though there are multiple pci buses.
*/
@@ -160,7 +160,7 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
if (mips_machtype == MACH_NEC_ROCKHOPPERII) {
/* hack to distinquish overlapping slot 20s, one
- * on bus 0 (ALI USB on the M1535 on the backplane),
+ * on bus 0 (ALI USB on the M1535 on the backplane),
* and one on bus 2 (NEC USB controller on the CPU board)
* Make the M1535 USB - ISA IRQ number 9.
*/
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 8141dffac241..8a5b52250bda 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -132,7 +132,7 @@ static int __init pcibios_init(void)
hose->need_domain_info = need_domain_info;
next_busno = bus->subordinate + 1;
/* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
+ reserve some space for bridges. */
if (next_busno > 224) {
next_busno = 0;
need_domain_info = 1;
@@ -260,7 +260,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
pci_read_bridge_bases(bus);
pcibios_fixup_device_resources(dev, bus);
- }
+ }
for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
struct pci_dev *dev = pci_dev_b(ln);
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
index b067988614c3..97862f45496d 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
@@ -30,7 +30,7 @@
*
* This code reads the ATMEL 24CXX EEPROM. The PMC-Sierra Yosemite board uses the ATMEL
* 24C32/24C64 which uses two byte addressing as compared to 24C16. Note that this program
- * uses the serial port like /dev/ttyS0, to communicate with the EEPROM. Hence, you are
+ * uses the serial port like /dev/ttyS0, to communicate with the EEPROM. Hence, you are
* expected to have a connectivity from the EEPROM to the serial port. This program does
* __not__ communicate using the I2C protocol
*/
@@ -64,14 +64,14 @@ static void send_ack(void)
static void send_byte(unsigned char byte)
{
int i = 0;
-
- for (i = 7; i >= 0; i--)
+
+ for (i = 7; i >= 0; i--)
send_bit((byte >> i) & 0x01);
}
-
+
static void send_start(void)
{
- sda_hi;
+ sda_hi;
delay(TXX);
scl_hi;
delay(TXX);
@@ -114,9 +114,9 @@ static unsigned char recv_byte(void) {
int i;
unsigned char byte=0;
- for (i=7;i>=0;i--)
+ for (i=7;i>=0;i--)
byte |= (recv_bit() << i);
-
+
return byte;
}
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
index d27566d99ffc..c19f01a32045 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
@@ -27,7 +27,7 @@
*/
/*
- * Header file for atmel_read_eeprom.c
+ * Header file for atmel_read_eeprom.c
*/
#include <linux/types.h>
@@ -46,7 +46,7 @@
#define DEFAULT_PORT "/dev/ttyS0" /* Port to open */
#define TXX 0 /* Dummy loop for spinning */
-#define BLOCK_SEL 0x00
+#define BLOCK_SEL 0x00
#define SLAVE_ADDR 0xa0
#define READ_BIT 0x01
#define WRITE_BIT 0x00
diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c
index 0ab4abf65d58..fa0e719c5bd1 100644
--- a/arch/mips/sgi-ip22/ip22-eisa.c
+++ b/arch/mips/sgi-ip22/ip22-eisa.c
@@ -242,7 +242,7 @@ int __init ip22_eisa_init(void)
int i, c;
char *str;
u8 *slot_addr;
-
+
if (!(sgimc->systemid & SGIMC_SYSID_EPRESENT)) {
printk(KERN_INFO "EISA: bus not present.\n");
return 1;
diff --git a/arch/mips/sgi-ip22/ip22-hpc.c b/arch/mips/sgi-ip22/ip22-hpc.c
index c0afeccb08c4..5c00cdd20d8e 100644
--- a/arch/mips/sgi-ip22/ip22-hpc.c
+++ b/arch/mips/sgi-ip22/ip22-hpc.c
@@ -49,7 +49,7 @@ void __init sgihpc_init(void)
sgint = &sgioc->int3;
system_type = "SGI Indy";
}
-
+
sgi_ioc_reset = (SGIOC_RESET_PPORT | SGIOC_RESET_KBDMOUSE |
SGIOC_RESET_EISA | SGIOC_RESET_ISDN |
SGIOC_RESET_LC0OFF);
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index ea2844d29e6e..d16fb43b1a93 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -28,7 +28,7 @@
/* #define DEBUG_SGINT */
/* So far nothing hangs here */
-#undef USE_LIO3_IRQ
+#undef USE_LIO3_IRQ
struct sgint_regs *sgint;
@@ -272,32 +272,32 @@ void indy_buserror_irq(struct pt_regs *regs)
irq_exit();
}
-static struct irqaction local0_cascade = {
+static struct irqaction local0_cascade = {
.handler = no_action,
.flags = SA_INTERRUPT,
.name = "local0 cascade",
};
-static struct irqaction local1_cascade = {
+static struct irqaction local1_cascade = {
.handler = no_action,
.flags = SA_INTERRUPT,
.name = "local1 cascade",
};
-static struct irqaction buserr = {
+static struct irqaction buserr = {
.handler = no_action,
.flags = SA_INTERRUPT,
.name = "Bus Error",
};
-static struct irqaction map0_cascade = {
+static struct irqaction map0_cascade = {
.handler = no_action,
.flags = SA_INTERRUPT,
.name = "mapable0 cascade",
};
#ifdef USE_LIO3_IRQ
-static struct irqaction map1_cascade = {
+static struct irqaction map1_cascade = {
.handler = no_action,
.flags = SA_INTERRUPT,
.name = "mapable1 cascade",
diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c
index de43e86fa17c..fd29fd407ae8 100644
--- a/arch/mips/sgi-ip22/ip22-nvram.c
+++ b/arch/mips/sgi-ip22/ip22-nvram.c
@@ -39,7 +39,7 @@
*ptr |= EEPROM_CSEL; \
*ptr |= EEPROM_ECLK; })
-
+
#define eeprom_cs_off(ptr) ({ \
*ptr &= ~EEPROM_ECLK; \
*ptr &= ~EEPROM_CSEL; \
@@ -50,7 +50,7 @@
/*
* clock in the nvram command and the register number. For the
* national semiconductor nv ram chip the op code is 3 bits and
- * the address is 6/8 bits.
+ * the address is 6/8 bits.
*/
static inline void eeprom_cmd(volatile unsigned int *ctrl, unsigned cmd,
unsigned reg)
@@ -90,7 +90,7 @@ unsigned short ip22_eeprom_read(volatile unsigned int *ctrl, int reg)
if (*ctrl & EEPROM_DATI)
res |= 1;
}
-
+
eeprom_cs_off(ctrl);
return res;
@@ -113,7 +113,7 @@ unsigned short ip22_nvram_read(int reg)
reg <<= 1;
tmp = hpc3c0->bbram[reg++] & 0xff;
return (tmp << 8) | (hpc3c0->bbram[reg] & 0xff);
- }
+ }
}
EXPORT_SYMBOL(ip22_nvram_read);
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index ed5c60adce63..214ffd2e98a3 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -185,7 +185,7 @@ static irqreturn_t panel_int(int irq, void *dev_id, struct pt_regs *regs)
add_timer(&debounce_timer);
}
- /* Power button was pressed
+ /* Power button was pressed
* ioc.ps page 22: "The Panel Register is called Power Control by Full
* House. Only lowest 2 bits are used. Guiness uses upper four bits
* for volume control". This is not true, all bits are pulled high
diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c
index 173f76805ea3..df9b5694328a 100644
--- a/arch/mips/sgi-ip22/ip22-time.c
+++ b/arch/mips/sgi-ip22/ip22-time.c
@@ -126,7 +126,7 @@ static __init void indy_time_init(void)
unsigned long r4k_ticks[3];
unsigned long r4k_tick;
- /*
+ /*
* Figure out the r4k offset, the algorithm is very simple and works in
* _all_ cases as long as the 8254 counter register itself works ok (as
* an interrupt driving timer it does not because of bug, this is why
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index a160d04f7dbe..ef20d9ac0ba3 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -538,7 +538,7 @@ void __init mem_init(void)
for_each_online_node(node) {
unsigned slot, numslots;
struct page *end, *p;
-
+
/*
* This will free up the bootmem, ie, slot 0 memory.
*/
diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c
index 281f090e48a4..88e1f52059ff 100644
--- a/arch/mips/sgi-ip32/ip32-reset.c
+++ b/arch/mips/sgi-ip32/ip32-reset.c
@@ -140,7 +140,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id, struct pt_regs *regs)
reg_c = CMOS_READ(RTC_INTR_FLAGS);
if (!(reg_c & RTC_IRQF)) {
- printk(KERN_WARNING
+ printk(KERN_WARNING
"%s: RTC IRQ without RTC_IRQF\n", __FUNCTION__);
}
/* Wait until interrupt goes away */
diff --git a/arch/mips/sibyte/cfe/cfe_error.h b/arch/mips/sibyte/cfe/cfe_error.h
index 77eb4935bfb4..975f00002cbe 100644
--- a/arch/mips/sibyte/cfe/cfe_error.h
+++ b/arch/mips/sibyte/cfe/cfe_error.h
@@ -17,15 +17,15 @@
*/
/* *********************************************************************
- *
+ *
* Broadcom Common Firmware Environment (CFE)
- *
+ *
* Error codes File: cfe_error.h
- *
+ *
* CFE's global error code list is here.
- *
+ *
* Author: Mitch Lichtenberg
- *
+ *
********************************************************************* */
diff --git a/arch/mips/sibyte/cfe/console.c b/arch/mips/sibyte/cfe/console.c
index 53a5c1eb5611..7721100d0275 100644
--- a/arch/mips/sibyte/cfe/console.c
+++ b/arch/mips/sibyte/cfe/console.c
@@ -38,7 +38,7 @@ static void cfe_console_write(struct console *cons, const char *str,
last += written;
} while (last < count);
}
-
+
}
static int cfe_console_setup(struct console *cons, char *str)
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index d86943f9d812..7a2c7a8510d4 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -285,7 +285,7 @@ void __init prom_init(void)
while (1) ;
}
cfe_init(cfe_handle, cfe_ept);
- /*
+ /*
* Get the handle for (at least) prom_putchar, possibly for
* boot console
*/
diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c
index 73392190d2b1..e44ce1a9eea9 100644
--- a/arch/mips/sibyte/cfe/smp.c
+++ b/arch/mips/sibyte/cfe/smp.c
@@ -57,7 +57,7 @@ void __init prom_prepare_cpus(unsigned int max_cpus)
void prom_boot_secondary(int cpu, struct task_struct *idle)
{
int retval;
-
+
retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
__KSTK_TOS(idle),
(unsigned long)idle->thread_info, 0);
diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c
index 182a16f42e2d..1a97e3127aeb 100644
--- a/arch/mips/sibyte/sb1250/bus_watcher.c
+++ b/arch/mips/sibyte/sb1250/bus_watcher.c
@@ -10,13 +10,13 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-/*
+/*
* The Bus Watcher monitors internal bus transactions and maintains
* counts of transactions with error status, logging details and
* causing one of several interrupts. This driver provides a handler
@@ -155,7 +155,7 @@ static int bw_read_proc(char *page, char **start, off_t off,
static void create_proc_decoder(struct bw_stats_struct *stats)
{
struct proc_dir_entry *ent;
-
+
ent = create_proc_read_entry("bus_watcher", S_IWUSR | S_IRUGO, NULL,
bw_read_proc, stats);
if (!ent) {
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 2728abbc94d2..2725b263cced 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -377,7 +377,7 @@ void __init arch_init_irq(void)
/*
* Note that the timer interrupts are also mapped, but this is
- * done in sb1250_time_init(). Also, the profiling driver
+ * done in sb1250_time_init(). Also, the profiling driver
* does its own management of IP7.
*/
@@ -392,7 +392,7 @@ void __init arch_init_irq(void)
if (kgdb_flag) {
kgdb_irq = K_INT_UART_0 + kgdb_port;
-#ifdef CONFIG_SIBYTE_SB1250_DUART
+#ifdef CONFIG_SIBYTE_SB1250_DUART
sb1250_duart_present[kgdb_port] = 0;
#endif
/* Setup uart 1 settings, mapper */
diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c
index 0e633ee8d83c..a686bb716ec6 100644
--- a/arch/mips/sibyte/swarm/rtc_m41t81.c
+++ b/arch/mips/sibyte/swarm/rtc_m41t81.c
@@ -128,7 +128,7 @@ static int m41t81_write(uint8_t addr, int b)
/* Clear error bit by writing a 1 */
bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
return -1;
- }
+ }
/* read the same byte again to make sure it is written */
bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
@@ -136,7 +136,7 @@ static int m41t81_write(uint8_t addr, int b)
while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
;
-
+
return 0;
}
@@ -148,13 +148,13 @@ int m41t81_set_time(unsigned long t)
/*
* Note the write order matters as it ensures the correctness.
- * When we write sec, 10th sec is clear. It is reasonable to
+ * When we write sec, 10th sec is clear. It is reasonable to
* believe we should finish writing min within a second.
*/
tm.tm_sec = BIN2BCD(tm.tm_sec);
m41t81_write(M41T81REG_SC, tm.tm_sec);
-
+
tm.tm_min = BIN2BCD(tm.tm_min);
m41t81_write(M41T81REG_MN, tm.tm_min);
@@ -187,7 +187,7 @@ unsigned long m41t81_get_time(void)
{
unsigned int year, mon, day, hour, min, sec;
- /*
+ /*
* min is valid if two reads of sec are the same.
*/
for (;;) {
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 4742e4fc89f7..4daeaa413def 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -98,7 +98,7 @@ static int __init swarm_setup(void)
rtc_get_time = xicor_get_time;
rtc_set_time = xicor_set_time;
}
-
+
if (m41t81_probe()) {
printk("swarm setup: M41T81 RTC detected.\n");
rtc_get_time = m41t81_get_time;
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 62c760f14674..141a310d74d8 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -103,7 +103,7 @@ static unsigned int ls1bit8(unsigned int x)
/*
* hwint 1 deals with EISA and SCSI interrupts,
- *
+ *
* The EISA_INT bit in CSITPEND is high active, all others are low active.
*/
void pciasic_hwint1(struct pt_regs *regs)
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 8f67cee4317b..1b3f8a0903e1 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -111,7 +111,7 @@ static struct resource sni_mem_resource = {
* The RM200/RM300 has a few holes in it's PCI/EISA memory address space used
* for other purposes. Be paranoid and allocate all of the before the PCI
* code gets a chance to to map anything else there ...
- *
+ *
* This leaves the following areas available:
*
* 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory
diff --git a/arch/mips/tx4927/common/tx4927_irq_handler.S b/arch/mips/tx4927/common/tx4927_irq_handler.S
index ca123e28d1ef..dd3ceda9d712 100644
--- a/arch/mips/tx4927/common/tx4927_irq_handler.S
+++ b/arch/mips/tx4927/common/tx4927_irq_handler.S
@@ -42,13 +42,13 @@
CLI
.set at
- mfc0 t0, CP0_CAUSE
+ mfc0 t0, CP0_CAUSE
mfc0 t1, CP0_STATUS
and t0, t1
-
+
andi t1, t0, STATUSF_IP7 /* cpu timer */
bnez t1, ll_ip7
-
+
/* IP6..IP3 multiplexed -- do not use */
andi t1, t0, STATUSF_IP2 /* tx4927 pic */
diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c
index 16bcbdc6d1cc..26d7c53612a8 100644
--- a/arch/mips/tx4927/common/tx4927_setup.c
+++ b/arch/mips/tx4927/common/tx4927_setup.c
@@ -152,7 +152,7 @@ dump_cp0(char *key)
print_cp0(key, 16, "CONFIG ", read_c0_config());
return;
}
-
+
void print_pic(char *key, u32 reg, char *name)
{
printk("%s pic:0x%08x:%s=0x%08x\n", key, reg, name,
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/Makefile b/arch/mips/tx4927/toshiba_rbtx4927/Makefile
index 86ca4cf2d587..c1a377a80a5d 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/Makefile
+++ b/arch/mips/tx4927/toshiba_rbtx4927/Makefile
@@ -1,5 +1,5 @@
-obj-y += toshiba_rbtx4927_prom.o
-obj-y += toshiba_rbtx4927_setup.o
-obj-y += toshiba_rbtx4927_irq.o
+obj-y += toshiba_rbtx4927_prom.o
+obj-y += toshiba_rbtx4927_setup.o
+obj-y += toshiba_rbtx4927_irq.o
EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
index fd5b433f83b7..aee07ff2212a 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
@@ -31,7 +31,7 @@
/*
-IRQ Device
+IRQ Device
00 RBTX4927-ISA/00
01 RBTX4927-ISA/01 PS2/Keyboard
02 RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
@@ -52,15 +52,15 @@ IRQ Device
16 TX4927-CP0/00 Software 0
17 TX4927-CP0/01 Software 1
18 TX4927-CP0/02 Cascade TX4927-CP0
-19 TX4927-CP0/03 Multiplexed -- do not use
-20 TX4927-CP0/04 Multiplexed -- do not use
-21 TX4927-CP0/05 Multiplexed -- do not use
-22 TX4927-CP0/06 Multiplexed -- do not use
+19 TX4927-CP0/03 Multiplexed -- do not use
+20 TX4927-CP0/04 Multiplexed -- do not use
+21 TX4927-CP0/05 Multiplexed -- do not use
+22 TX4927-CP0/06 Multiplexed -- do not use
23 TX4927-CP0/07 CPU TIMER
24 TX4927-PIC/00
25 TX4927-PIC/01
-26 TX4927-PIC/02
+26 TX4927-PIC/02
27 TX4927-PIC/03 Cascade RBTX4927-IOC
28 TX4927-PIC/04
29 TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
@@ -80,7 +80,7 @@ IRQ Device
43 TX4927-PIC/19
44 TX4927-PIC/20
45 TX4927-PIC/21
-46 TX4927-PIC/22 TX4927 PCI PCI-ERR
+46 TX4927-PIC/22 TX4927 PCI PCI-ERR
47 TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
48 TX4927-PIC/24
49 TX4927-PIC/25
@@ -100,7 +100,7 @@ IRQ Device
62 RBTX4927-IOC/06
63 RBTX4927-IOC/07
-NOTES:
+NOTES:
SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
SouthBridge/ISA/pin=0 no pci irq used by this device
SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
@@ -175,19 +175,19 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB
static const u32 toshiba_rbtx4927_irq_debug_flag =
(TOSHIBA_RBTX4927_IRQ_NONE | TOSHIBA_RBTX4927_IRQ_INFO |
TOSHIBA_RBTX4927_IRQ_WARN | TOSHIBA_RBTX4927_IRQ_EROR
-// | TOSHIBA_RBTX4927_IRQ_IOC_INIT
-// | TOSHIBA_RBTX4927_IRQ_IOC_STARTUP
-// | TOSHIBA_RBTX4927_IRQ_IOC_SHUTDOWN
-// | TOSHIBA_RBTX4927_IRQ_IOC_ENABLE
-// | TOSHIBA_RBTX4927_IRQ_IOC_DISABLE
-// | TOSHIBA_RBTX4927_IRQ_IOC_MASK
-// | TOSHIBA_RBTX4927_IRQ_IOC_ENDIRQ
-// | TOSHIBA_RBTX4927_IRQ_ISA_INIT
-// | TOSHIBA_RBTX4927_IRQ_ISA_STARTUP
-// | TOSHIBA_RBTX4927_IRQ_ISA_SHUTDOWN
-// | TOSHIBA_RBTX4927_IRQ_ISA_ENABLE
-// | TOSHIBA_RBTX4927_IRQ_ISA_DISABLE
-// | TOSHIBA_RBTX4927_IRQ_ISA_MASK
+// | TOSHIBA_RBTX4927_IRQ_IOC_INIT
+// | TOSHIBA_RBTX4927_IRQ_IOC_STARTUP
+// | TOSHIBA_RBTX4927_IRQ_IOC_SHUTDOWN
+// | TOSHIBA_RBTX4927_IRQ_IOC_ENABLE
+// | TOSHIBA_RBTX4927_IRQ_IOC_DISABLE
+// | TOSHIBA_RBTX4927_IRQ_IOC_MASK
+// | TOSHIBA_RBTX4927_IRQ_IOC_ENDIRQ
+// | TOSHIBA_RBTX4927_IRQ_ISA_INIT
+// | TOSHIBA_RBTX4927_IRQ_ISA_STARTUP
+// | TOSHIBA_RBTX4927_IRQ_ISA_SHUTDOWN
+// | TOSHIBA_RBTX4927_IRQ_ISA_ENABLE
+// | TOSHIBA_RBTX4927_IRQ_ISA_DISABLE
+// | TOSHIBA_RBTX4927_IRQ_ISA_MASK
// | TOSHIBA_RBTX4927_IRQ_ISA_ENDIRQ
);
#endif
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index 8724ea3ae04e..fc0720599fd9 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -395,7 +395,7 @@ static int __init tx4927_pcibios_init(void)
/* enable secondary ide */
v08_43 |= 0x80;
- /*
+ /*
* !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
*
* This line of code is intended to provide the user with a work
diff --git a/arch/mips/vr41xx/common/vrc4173.c b/arch/mips/vr41xx/common/vrc4173.c
index 5475dd72e264..ba58764ef8ea 100644
--- a/arch/mips/vr41xx/common/vrc4173.c
+++ b/arch/mips/vr41xx/common/vrc4173.c
@@ -476,7 +476,7 @@ static inline int vrc4173_icu_init(int cascade_irq)
if (cascade_irq < GIU_IRQ(0) || cascade_irq > GIU_IRQ(15))
return -EINVAL;
-
+
vrc4173_outw(0, VRC4173_MSYSINT1REG);
vr41xx_set_irq_trigger(GIU_IRQ_TO_PIN(cascade_irq), TRIGGER_LEVEL, SIGNAL_THROUGH);
diff --git a/include/asm-mips/asmmacro.h b/include/asm-mips/asmmacro.h
index 40ceedcf454e..30b18ea6cb11 100644
--- a/include/asm-mips/asmmacro.h
+++ b/include/asm-mips/asmmacro.h
@@ -7,10 +7,10 @@
*/
#ifndef _ASM_ASMMACRO_H
#define _ASM_ASMMACRO_H
-
+
#include <linux/config.h>
#include <asm/hazards.h>
-
+
#ifdef CONFIG_32BIT
#include <asm/asmmacro-32.h>
#endif
diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h
index bc136dcfdbe6..eb8d79dba11c 100644
--- a/include/asm-mips/bitops.h
+++ b/include/asm-mips/bitops.h
@@ -20,13 +20,13 @@
#define SZLONG_MASK 31UL
#define __LL "ll "
#define __SC "sc "
-#define cpu_to_lelongp(x) cpu_to_le32p((__u32 *) (x))
+#define cpu_to_lelongp(x) cpu_to_le32p((__u32 *) (x))
#elif (_MIPS_SZLONG == 64)
#define SZLONG_LOG 6
#define SZLONG_MASK 63UL
#define __LL "lld "
#define __SC "scd "
-#define cpu_to_lelongp(x) cpu_to_le64p((__u64 *) (x))
+#define cpu_to_lelongp(x) cpu_to_le64p((__u64 *) (x))
#endif
#ifdef __KERNEL__
diff --git a/include/asm-mips/ddb5xxx/ddb5477.h b/include/asm-mips/ddb5xxx/ddb5477.h
index ae3e2a38fd5f..a438548e6ef3 100644
--- a/include/asm-mips/ddb5xxx/ddb5477.h
+++ b/include/asm-mips/ddb5xxx/ddb5477.h
@@ -247,7 +247,7 @@ extern void ll_vrc5477_irq_disable(int vrc5477_irq);
* All PCI irq but INTC are active low.
*/
-/*
+/*
* irq number block assignment
*/
@@ -285,7 +285,7 @@ extern void ll_vrc5477_irq_disable(int vrc5477_irq);
#define VRC5477_IRQ_IOPCI_INTB (17 + VRC5477_IRQ_BASE) /* USB-P */
#define VRC5477_IRQ_IOPCI_INTC (18 + VRC5477_IRQ_BASE) /* AC97 */
#define VRC5477_IRQ_IOPCI_INTD (19 + VRC5477_IRQ_BASE) /* Reserved */
-#define VRC5477_IRQ_UART1 (20 + VRC5477_IRQ_BASE)
+#define VRC5477_IRQ_UART1 (20 + VRC5477_IRQ_BASE)
#define VRC5477_IRQ_SPT0 (21 + VRC5477_IRQ_BASE) /* special purpose timer 0 */
#define VRC5477_IRQ_GPT0 (22 + VRC5477_IRQ_BASE) /* general purpose timer 0 */
#define VRC5477_IRQ_GPT1 (23 + VRC5477_IRQ_BASE) /* general purpose timer 1 */
@@ -301,7 +301,7 @@ extern void ll_vrc5477_irq_disable(int vrc5477_irq);
/*
* i2859 irq assignment
*/
-#define I8259_IRQ_RESERVED_0 (0 + I8259_IRQ_BASE)
+#define I8259_IRQ_RESERVED_0 (0 + I8259_IRQ_BASE)
#define I8259_IRQ_KEYBOARD (1 + I8259_IRQ_BASE) /* M1543 default */
#define I8259_IRQ_CASCADE (2 + I8259_IRQ_BASE)
#define I8259_IRQ_UART_B (3 + I8259_IRQ_BASE) /* M1543 default, may conflict with RTC according to schematic diagram */
diff --git a/include/asm-mips/fpregdef.h b/include/asm-mips/fpregdef.h
index 1d9aa0979181..2b5fddc8f487 100644
--- a/include/asm-mips/fpregdef.h
+++ b/include/asm-mips/fpregdef.h
@@ -13,7 +13,7 @@
#define _ASM_FPREGDEF_H
#include <asm/sgidefs.h>
-
+
#if _MIPS_SIM == _MIPS_SIM_ABI32
/*
@@ -56,7 +56,7 @@
#define fcr31 $31 /* FPU status register */
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
-
+
#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
#define fv0 $f0 /* return value */
diff --git a/include/asm-mips/fpu.h b/include/asm-mips/fpu.h
index 6cb38d5c0407..ea24e733b1bc 100644
--- a/include/asm-mips/fpu.h
+++ b/include/asm-mips/fpu.h
@@ -82,7 +82,7 @@ do { \
static inline int is_fpu_owner(void)
{
- return cpu_has_fpu && test_thread_flag(TIF_USEDFPU);
+ return cpu_has_fpu && test_thread_flag(TIF_USEDFPU);
}
static inline void own_fpu(void)
@@ -90,7 +90,7 @@ static inline void own_fpu(void)
if (cpu_has_fpu) {
__enable_fpu();
KSTK_STATUS(current) |= ST0_CU1;
- set_thread_flag(TIF_USEDFPU);
+ set_thread_flag(TIF_USEDFPU);
}
}
@@ -98,7 +98,7 @@ static inline void lose_fpu(void)
{
if (cpu_has_fpu) {
KSTK_STATUS(current) &= ~ST0_CU1;
- clear_thread_flag(TIF_USEDFPU);
+ clear_thread_flag(TIF_USEDFPU);
__disable_fpu();
}
}
@@ -127,7 +127,7 @@ static inline void restore_fp(struct task_struct *tsk)
static inline fpureg_t *get_fpu_regs(struct task_struct *tsk)
{
if (cpu_has_fpu) {
- if ((tsk == current) && is_fpu_owner())
+ if ((tsk == current) && is_fpu_owner())
_save_fp(current);
return tsk->thread.fpu.hard.fpr;
}
diff --git a/include/asm-mips/ip32/mace.h b/include/asm-mips/ip32/mace.h
index 2b7b0fdeac19..432011b16c26 100644
--- a/include/asm-mips/ip32/mace.h
+++ b/include/asm-mips/ip32/mace.h
@@ -94,7 +94,7 @@ struct mace_video {
unsigned long xxx; /* later... */
};
-/*
+/*
* Ethernet interface
*/
struct mace_ethernet {
@@ -129,7 +129,7 @@ struct mace_ethernet {
volatile unsigned long rx_fifo;
};
-/*
+/*
* Peripherals
*/
@@ -251,7 +251,7 @@ struct mace_timers {
timer_reg audio_out2;
timer_reg video_in1;
timer_reg video_in2;
- timer_reg video_out;
+ timer_reg video_out;
};
struct mace_perif {
@@ -272,7 +272,7 @@ struct mace_perif {
};
-/*
+/*
* ISA peripherals
*/
diff --git a/include/asm-mips/lasat/serial.h b/include/asm-mips/lasat/serial.h
index 21d0fb7cee64..9e88c7669c7a 100644
--- a/include/asm-mips/lasat/serial.h
+++ b/include/asm-mips/lasat/serial.h
@@ -1,13 +1,13 @@
#include <asm/lasat/lasat.h>
/* Lasat 100 boards serial configuration */
-#define LASAT_BASE_BAUD_100 ( 7372800 / 16 )
+#define LASAT_BASE_BAUD_100 ( 7372800 / 16 )
#define LASAT_UART_REGS_BASE_100 0x1c8b0000
#define LASAT_UART_REGS_SHIFT_100 2
#define LASATINT_UART_100 8
/* * LASAT 200 boards serial configuration */
-#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12)
+#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12)
#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300)
#define LASAT_UART_REGS_SHIFT_200 3
#define LASATINT_UART_200 13
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index 2b36ea346910..148bae2fa7d3 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -1383,7 +1383,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
#define PCI_IO_START 0
#define PCI_IO_END 0
#define PCI_MEM_START 0
-#define PCI_MEM_END 0
+#define PCI_MEM_END 0
#define PCI_FIRST_DEVFN 0
#define PCI_LAST_DEVFN 0
#endif
diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h
index 4691398a414f..efafe65258b6 100644
--- a/include/asm-mips/mach-db1x00/db1x00.h
+++ b/include/asm-mips/mach-db1x00/db1x00.h
@@ -23,7 +23,7 @@
*
* ########################################################################
*
- *
+ *
*/
#ifndef __ASM_DB1X00_H
#define __ASM_DB1X00_H
diff --git a/include/asm-mips/mach-jazz/floppy.h b/include/asm-mips/mach-jazz/floppy.h
index 8cf0d042c864..c9dad99b1232 100644
--- a/include/asm-mips/mach-jazz/floppy.h
+++ b/include/asm-mips/mach-jazz/floppy.h
@@ -92,7 +92,7 @@ static inline int fd_request_irq(void)
return request_irq(FLOPPY_IRQ, floppy_interrupt,
SA_INTERRUPT | SA_SAMPLE_RANDOM, "floppy", NULL);
}
-
+
static inline void fd_free_irq(void)
{
free_irq(FLOPPY_IRQ, NULL);
diff --git a/include/asm-mips/mach-pb1x00/pb1500.h b/include/asm-mips/mach-pb1x00/pb1500.h
index d6c779747b3c..ff6d40c87a25 100644
--- a/include/asm-mips/mach-pb1x00/pb1500.h
+++ b/include/asm-mips/mach-pb1x00/pb1500.h
@@ -33,11 +33,11 @@
#define PCI_BOARD_REG 0xAE000010
#define PCMCIA_BOARD_REG 0xAE000010
#define PC_DEASSERT_RST 0x80
- #define PC_DRV_EN 0x10
+ #define PC_DRV_EN 0x10
#define PB1500_G_CONTROL 0xAE000014
#define PB1500_RST_VDDI 0xAE00001C
#define PB1500_LEDS 0xAE000018
-
+
#define PB1500_HEX_LED 0xAF000004
#define PB1500_HEX_LED_BLANK 0xAF000008
diff --git a/include/asm-mips/r4kcache.h b/include/asm-mips/r4kcache.h
index da03a32c1ca7..5bea49feec66 100644
--- a/include/asm-mips/r4kcache.h
+++ b/include/asm-mips/r4kcache.h
@@ -171,11 +171,11 @@ static inline void blast_dcache16(void)
unsigned long start = INDEX_BASE;
unsigned long end = start + current_cpu_data.dcache.waysize;
unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
- unsigned long ws_end = current_cpu_data.dcache.ways <<
+ unsigned long ws_end = current_cpu_data.dcache.ways <<
current_cpu_data.dcache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
for (addr = start; addr < end; addr += 0x200)
cache16_unroll32(addr|ws,Index_Writeback_Inv_D);
}
@@ -200,8 +200,8 @@ static inline void blast_dcache16_page_indexed(unsigned long page)
current_cpu_data.dcache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x200)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start; addr < end; addr += 0x200)
cache16_unroll32(addr|ws,Index_Writeback_Inv_D);
}
@@ -214,8 +214,8 @@ static inline void blast_icache16(void)
current_cpu_data.icache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x200)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start; addr < end; addr += 0x200)
cache16_unroll32(addr|ws,Index_Invalidate_I);
}
@@ -239,8 +239,8 @@ static inline void blast_icache16_page_indexed(unsigned long page)
current_cpu_data.icache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x200)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start; addr < end; addr += 0x200)
cache16_unroll32(addr|ws,Index_Invalidate_I);
}
@@ -249,11 +249,11 @@ static inline void blast_scache16(void)
unsigned long start = INDEX_BASE;
unsigned long end = start + current_cpu_data.scache.waysize;
unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
- unsigned long ws_end = current_cpu_data.scache.ways <<
+ unsigned long ws_end = current_cpu_data.scache.ways <<
current_cpu_data.scache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
for (addr = start; addr < end; addr += 0x200)
cache16_unroll32(addr|ws,Index_Writeback_Inv_SD);
}
@@ -278,8 +278,8 @@ static inline void blast_scache16_page_indexed(unsigned long page)
current_cpu_data.scache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x200)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start; addr < end; addr += 0x200)
cache16_unroll32(addr|ws,Index_Writeback_Inv_SD);
}
@@ -318,8 +318,8 @@ static inline void blast_dcache32(void)
current_cpu_data.dcache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start; addr < end; addr += 0x400)
cache32_unroll32(addr|ws,Index_Writeback_Inv_D);
}
@@ -343,8 +343,8 @@ static inline void blast_dcache32_page_indexed(unsigned long page)
current_cpu_data.dcache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start; addr < end; addr += 0x400)
cache32_unroll32(addr|ws,Index_Writeback_Inv_D);
}
@@ -357,8 +357,8 @@ static inline void blast_icache32(void)
current_cpu_data.icache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start; addr < end; addr += 0x400)
cache32_unroll32(addr|ws,Index_Invalidate_I);
}
@@ -383,7 +383,7 @@ static inline void blast_icache32_page_indexed(unsigned long page)
unsigned long ws, addr;
for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400)
+ for (addr = start; addr < end; addr += 0x400)
cache32_unroll32(addr|ws,Index_Invalidate_I);
}
@@ -392,11 +392,11 @@ static inline void blast_scache32(void)
unsigned long start = INDEX_BASE;
unsigned long end = start + current_cpu_data.scache.waysize;
unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
- unsigned long ws_end = current_cpu_data.scache.ways <<
+ unsigned long ws_end = current_cpu_data.scache.ways <<
current_cpu_data.scache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
for (addr = start; addr < end; addr += 0x400)
cache32_unroll32(addr|ws,Index_Writeback_Inv_SD);
}
@@ -421,8 +421,8 @@ static inline void blast_scache32_page_indexed(unsigned long page)
current_cpu_data.scache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x400)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start; addr < end; addr += 0x400)
cache32_unroll32(addr|ws,Index_Writeback_Inv_SD);
}
@@ -461,8 +461,8 @@ static inline void blast_icache64(void)
current_cpu_data.icache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x800)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start; addr < end; addr += 0x800)
cache64_unroll32(addr|ws,Index_Invalidate_I);
}
@@ -487,7 +487,7 @@ static inline void blast_icache64_page_indexed(unsigned long page)
unsigned long ws, addr;
for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x800)
+ for (addr = start; addr < end; addr += 0x800)
cache64_unroll32(addr|ws,Index_Invalidate_I);
}
@@ -496,11 +496,11 @@ static inline void blast_scache64(void)
unsigned long start = INDEX_BASE;
unsigned long end = start + current_cpu_data.scache.waysize;
unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
- unsigned long ws_end = current_cpu_data.scache.ways <<
+ unsigned long ws_end = current_cpu_data.scache.ways <<
current_cpu_data.scache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
for (addr = start; addr < end; addr += 0x800)
cache64_unroll32(addr|ws,Index_Writeback_Inv_SD);
}
@@ -525,8 +525,8 @@ static inline void blast_scache64_page_indexed(unsigned long page)
current_cpu_data.scache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x800)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start; addr < end; addr += 0x800)
cache64_unroll32(addr|ws,Index_Writeback_Inv_SD);
}
@@ -561,11 +561,11 @@ static inline void blast_scache128(void)
unsigned long start = INDEX_BASE;
unsigned long end = start + current_cpu_data.scache.waysize;
unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit;
- unsigned long ws_end = current_cpu_data.scache.ways <<
+ unsigned long ws_end = current_cpu_data.scache.ways <<
current_cpu_data.scache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
for (addr = start; addr < end; addr += 0x1000)
cache128_unroll32(addr|ws,Index_Writeback_Inv_SD);
}
@@ -590,8 +590,8 @@ static inline void blast_scache128_page_indexed(unsigned long page)
current_cpu_data.scache.waybit;
unsigned long ws, addr;
- for (ws = 0; ws < ws_end; ws += ws_inc)
- for (addr = start; addr < end; addr += 0x1000)
+ for (ws = 0; ws < ws_end; ws += ws_inc)
+ for (addr = start; addr < end; addr += 0x1000)
cache128_unroll32(addr|ws,Index_Writeback_Inv_SD);
}
diff --git a/include/asm-mips/rtc.h b/include/asm-mips/rtc.h
index 31c0c2347f4f..3c4b637fd925 100644
--- a/include/asm-mips/rtc.h
+++ b/include/asm-mips/rtc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-mips/rtc.h
+ * include/asm-mips/rtc.h
*
* (Really an interface for drivers/char/genrtc.c)
*
diff --git a/include/asm-mips/sgi/gio.h b/include/asm-mips/sgi/gio.h
index a38d66f99872..889cf028c95d 100644
--- a/include/asm-mips/sgi/gio.h
+++ b/include/asm-mips/sgi/gio.h
@@ -16,7 +16,7 @@
*
* The Indigo and Indy have two GIO bus connectors. Indigo2 (all models) have
* three physical connectors, but only two slots, GFX and EXP0.
- *
+ *
* There is 10MB of GIO address space for GIO64 slot devices
* slot# slot type address range size
* ----- --------- ----------------------- -----
diff --git a/include/asm-mips/sgi/hpc3.h b/include/asm-mips/sgi/hpc3.h
index a5b988d7327a..ac3dfc7af5b0 100644
--- a/include/asm-mips/sgi/hpc3.h
+++ b/include/asm-mips/sgi/hpc3.h
@@ -221,7 +221,7 @@ struct hpc3_regs {
#define HPC3_BESTAT_PIDMASK 0x3f700 /* DMA channel parity identifier */
u32 _unused1[0x14000/4 - 5]; /* padding */
-
+
/* Now direct PIO per-HPC3 peripheral access to external regs. */
volatile u32 scsi0_ext[256]; /* SCSI channel 0 external regs */
u32 _unused2[0x7c00/4];
@@ -304,7 +304,7 @@ struct hpc3_regs {
volatile u32 bbram[8192-50-14]; /* Battery backed ram */
};
-/*
+/*
* It is possible to have two HPC3's within the address space on
* one machine, though only having one is more likely on an Indy.
*/
diff --git a/include/asm-mips/sgi/ioc.h b/include/asm-mips/sgi/ioc.h
index 169187f53fbc..f3e3dc9bb732 100644
--- a/include/asm-mips/sgi/ioc.h
+++ b/include/asm-mips/sgi/ioc.h
@@ -16,7 +16,7 @@
#include <linux/types.h>
#include <asm/sgi/pi1.h>
-/*
+/*
* All registers are 8-bit wide alligned on 32-bit boundary. Bad things
* happen if you try word access them. You have been warned.
*/
@@ -138,7 +138,7 @@ struct sgioc_regs {
u8 _sysid[3];
volatile u8 sysid;
#define SGIOC_SYSID_FULLHOUSE 0x01
-#define SGIOC_SYSID_BOARDREV(x) ((x & 0xe0) > 5)
+#define SGIOC_SYSID_BOARDREV(x) ((x & 0xe0) > 5)
#define SGIOC_SYSID_CHIPREV(x) ((x & 0x1e) > 1)
u32 _unused2;
u8 _read[3];
diff --git a/include/asm-mips/sgi/ip22.h b/include/asm-mips/sgi/ip22.h
index 97d73adb4e40..bbfc05c3cab9 100644
--- a/include/asm-mips/sgi/ip22.h
+++ b/include/asm-mips/sgi/ip22.h
@@ -12,7 +12,7 @@
#ifndef _SGI_IP22_H
#define _SGI_IP22_H
-/*
+/*
* These are the virtual IRQ numbers, we divide all IRQ's into
* 'spaces', the 'space' determines where and how to enable/disable
* that particular IRQ on an SGI machine. HPC DMA and MC DMA interrups
diff --git a/include/asm-mips/sgi/mc.h b/include/asm-mips/sgi/mc.h
index fd98f930607c..c52f7834c7c8 100644
--- a/include/asm-mips/sgi/mc.h
+++ b/include/asm-mips/sgi/mc.h
@@ -182,14 +182,14 @@ struct sgimc_regs {
volatile u32 dtlb_hi3;
u32 _unused33;
volatile u32 dtlb_lo3;
-
+
u32 _unused34[0x0392];
-
+
u32 _unused35;
volatile u32 rpsscounter; /* Chirps at 100ns */
u32 _unused36[0x1000/4-2*4];
-
+
u32 _unused37;
volatile u32 maddronly; /* Address DMA goes at */
u32 _unused38;
diff --git a/include/asm-mips/sibyte/carmel.h b/include/asm-mips/sibyte/carmel.h
index 7ac5da13ce8a..b5e7dae19f0f 100644
--- a/include/asm-mips/sibyte/carmel.h
+++ b/include/asm-mips/sibyte/carmel.h
@@ -25,12 +25,12 @@
#define SIBYTE_BOARD_NAME "Carmel"
-#define GPIO_PHY_INTERRUPT 2
-#define GPIO_NONMASKABLE_INT 3
-#define GPIO_CF_INSERTED 6
-#define GPIO_MONTEREY_RESET 7
-#define GPIO_QUADUART_INT 8
-#define GPIO_CF_INT 9
+#define GPIO_PHY_INTERRUPT 2
+#define GPIO_NONMASKABLE_INT 3
+#define GPIO_CF_INSERTED 6
+#define GPIO_MONTEREY_RESET 7
+#define GPIO_QUADUART_INT 8
+#define GPIO_CF_INT 9
#define GPIO_FPGA_CCLK 10
#define GPIO_FPGA_DOUT 11
#define GPIO_FPGA_DIN 12
diff --git a/include/asm-mips/sibyte/sb1250_defs.h b/include/asm-mips/sibyte/sb1250_defs.h
index 96088fb074a4..40ef97c76c8b 100644
--- a/include/asm-mips/sibyte/sb1250_defs.h
+++ b/include/asm-mips/sibyte/sb1250_defs.h
@@ -1,23 +1,23 @@
/* *********************************************************************
* SB1250 Board Support Package
- *
- * Global constants and macros File: sb1250_defs.h
- *
+ *
+ * Global constants and macros File: sb1250_defs.h
+ *
* This file contains macros and definitions used by the other
* include files.
*
* SB1250 specification level: User's manual 1/02/02
- *
+ *
* Author: Mitch Lichtenberg
- *
- *********************************************************************
+ *
+ *********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
@@ -105,7 +105,7 @@
#define SIBYTE_HDR_FMASK_112x_ALL 0x0000f00
#define SIBYTE_HDR_FMASK_112x_PASS1 0x0000100
-/* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */
+/* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */
#define SIBYTE_HDR_FMASK(chip, pass) \
(SIBYTE_HDR_FMASK_ ## chip ## _ ## pass)
#define SIBYTE_HDR_FMASK_ALLREVS(chip) \
@@ -150,31 +150,31 @@
/* *********************************************************************
* Naming schemes for constants in these files:
- *
- * M_xxx MASK constant (identifies bits in a register).
+ *
+ * M_xxx MASK constant (identifies bits in a register).
* For multi-bit fields, all bits in the field will
* be set.
*
* K_xxx "Code" constant (value for data in a multi-bit
* field). The value is right justified.
*
- * V_xxx "Value" constant. This is the same as the
+ * V_xxx "Value" constant. This is the same as the
* corresponding "K_xxx" constant, except it is
* shifted to the correct position in the register.
*
* S_xxx SHIFT constant. This is the number of bits that
- * a field value (code) needs to be shifted
+ * a field value (code) needs to be shifted
* (towards the left) to put the value in the right
* position for the register.
*
- * A_xxx ADDRESS constant. This will be a physical
+ * A_xxx ADDRESS constant. This will be a physical
* address. Use the PHYS_TO_K1 macro to generate
* a K1SEG address.
*
* R_xxx RELATIVE offset constant. This is an offset from
* an A_xxx constant (usually the first register in
* a group).
- *
+ *
* G_xxx(X) GET value. This macro obtains a multi-bit field
* from a register, masks it, and shifts it to
* the bottom of the register (retrieving a K_xxx
@@ -189,7 +189,7 @@
/*
- * Cast to 64-bit number. Presumably the syntax is different in
+ * Cast to 64-bit number. Presumably the syntax is different in
* assembly language.
*
* Note: you'll need to define uint32_t and uint64_t in your headers.
diff --git a/include/asm-mips/sibyte/sb1250_dma.h b/include/asm-mips/sibyte/sb1250_dma.h
index f1b08d32338d..3cdb48f50ed0 100644
--- a/include/asm-mips/sibyte/sb1250_dma.h
+++ b/include/asm-mips/sibyte/sb1250_dma.h
@@ -1,24 +1,24 @@
/* *********************************************************************
* SB1250 Board Support Package
- *
+ *
* DMA definitions File: sb1250_dma.h
- *
+ *
* This module contains constants and macros useful for
* programming the SB1250's DMA controllers, both the data mover
* and the Ethernet DMA.
- *
+ *
* SB1250 specification level: User's manual 1/02/02
- *
+ *
* Author: Mitch Lichtenberg
- *
- *********************************************************************
+ *
+ *********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -28,7 +28,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
@@ -43,9 +43,9 @@
* DMA Registers
********************************************************************* */
-/*
+/*
* Ethernet and Serial DMA Configuration Register 0 (Table 7-4)
- * Registers: DMA_CONFIG0_MAC_x_RX_CH_0
+ * Registers: DMA_CONFIG0_MAC_x_RX_CH_0
* Registers: DMA_CONFIG0_MAC_x_TX_CH_0
* Registers: DMA_CONFIG0_SER_x_RX
* Registers: DMA_CONFIG0_SER_x_TX
@@ -98,7 +98,7 @@
/*
* Ethernet and Serial DMA Configuration Register 1 (Table 7-5)
- * Registers: DMA_CONFIG1_MAC_x_RX_CH_0
+ * Registers: DMA_CONFIG1_MAC_x_RX_CH_0
* Registers: DMA_CONFIG1_DMA_x_TX_CH_0
* Registers: DMA_CONFIG1_SER_x_RX
* Registers: DMA_CONFIG1_SER_x_TX
@@ -152,11 +152,11 @@
/*
* DMA Descriptor Count Registers (Table 7-8)
*/
-
+
/* No bitfields */
-/*
+/*
* Current Descriptor Address Register (Table 7-11)
*/
@@ -275,14 +275,14 @@
#define V_DMA_DSCRB_STATUS(x) _SB_MAKEVALUE(x,S_DMA_DSCRB_STATUS)
#define G_DMA_DSCRB_STATUS(x) _SB_GETVALUE(x,S_DMA_DSCRB_STATUS,M_DMA_DSCRB_STATUS)
-/*
+/*
* Ethernet Descriptor Status Bits (Table 7-15)
*/
#define M_DMA_ETHRX_BADIP4CS _SB_MAKEMASK1(51)
#define M_DMA_ETHRX_DSCRERR _SB_MAKEMASK1(52)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
/* Note: BADTCPCS is actually in DSCR_B options field */
#define M_DMA_ETHRX_BADTCPCS _SB_MAKEMASK1(0)
#endif /* 1250 PASS2 || 112x PASS1 */
@@ -324,7 +324,7 @@
#define M_DMA_ETHTX_SOP _SB_MAKEMASK1(63)
-/*
+/*
* Ethernet Transmit Options (Table 7-17)
*/
@@ -377,7 +377,7 @@
* Data Mover Registers
********************************************************************* */
-/*
+/*
* Data Mover Descriptor Base Address Register (Table 7-22)
* Register: DM_DSCR_BASE_0
* Register: DM_DSCR_BASE_1
@@ -414,7 +414,7 @@
#define M_DM_DSCR_BASE_ABORT _SB_MAKEMASK1(62)
#define M_DM_DSCR_BASE_ENABL _SB_MAKEMASK1(63)
-/*
+/*
* Data Mover Descriptor Count Register (Table 7-25)
*/
diff --git a/include/asm-mips/sibyte/sb1250_genbus.h b/include/asm-mips/sibyte/sb1250_genbus.h
index 0d9dfac3d7db..f1f509f295c4 100644
--- a/include/asm-mips/sibyte/sb1250_genbus.h
+++ b/include/asm-mips/sibyte/sb1250_genbus.h
@@ -1,23 +1,23 @@
/* *********************************************************************
* SB1250 Board Support Package
- *
+ *
* Generic Bus Constants File: sb1250_genbus.h
- *
- * This module contains constants and macros useful for
+ *
+ * This module contains constants and macros useful for
* manipulating the SB1250's Generic Bus interface
- *
+ *
* SB1250 specification level: User's manual 1/02/02
- *
+ *
* Author: Mitch Lichtenberg
- *
- *********************************************************************
+ *
+ *********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
diff --git a/include/asm-mips/sibyte/sb1250_int.h b/include/asm-mips/sibyte/sb1250_int.h
index c3f74df211f4..e173e2ea4c98 100644
--- a/include/asm-mips/sibyte/sb1250_int.h
+++ b/include/asm-mips/sibyte/sb1250_int.h
@@ -1,23 +1,23 @@
/* *********************************************************************
* SB1250 Board Support Package
- *
+ *
* Interrupt Mapper definitions File: sb1250_int.h
- *
+ *
* This module contains constants for manipulating the SB1250's
* interrupt mapper and definitions for the interrupt sources.
- *
+ *
* SB1250 specification level: User's manual 1/02/02
- *
+ *
* Author: Mitch Lichtenberg
- *
- *********************************************************************
+ *
+ *********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
@@ -43,7 +43,7 @@
/*
* Interrupt sources (Table 4-8, UM 0.2)
- *
+ *
* First, the interrupt numbers.
*/
diff --git a/include/asm-mips/sibyte/sb1250_l2c.h b/include/asm-mips/sibyte/sb1250_l2c.h
index 799db828d963..8afe8e01581b 100644
--- a/include/asm-mips/sibyte/sb1250_l2c.h
+++ b/include/asm-mips/sibyte/sb1250_l2c.h
@@ -1,23 +1,23 @@
/* *********************************************************************
* SB1250 Board Support Package
- *
+ *
* L2 Cache constants and macros File: sb1250_l2c.h
- *
+ *
* This module contains constants useful for manipulating the
* level 2 cache.
- *
+ *
* SB1250 specification level: User's manual 1/02/02
- *
+ *
* Author: Mitch Lichtenberg
- *
- *********************************************************************
+ *
+ *********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
diff --git a/include/asm-mips/sibyte/sb1250_ldt.h b/include/asm-mips/sibyte/sb1250_ldt.h
index d8753885df17..f2617ded0a8f 100644
--- a/include/asm-mips/sibyte/sb1250_ldt.h
+++ b/include/asm-mips/sibyte/sb1250_ldt.h
@@ -1,23 +1,23 @@
/* *********************************************************************
* SB1250 Board Support Package
- *
+ *
* LDT constants File: sb1250_ldt.h
- *
- * This module contains constants and macros to describe
- * the LDT interface on the SB1250.
- *
+ *
+ * This module contains constants and macros to describe
+ * the LDT interface on the SB1250.
+ *
* SB1250 specification level: User's manual 1/02/02
- *
+ *
* Author: Mitch Lichtenberg
- *
- *********************************************************************
+ *
+ *********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
@@ -155,7 +155,7 @@
/*
* LDT Status Register (Table 8-14). Note that these constants
- * assume you've read the command and status register
+ * assume you've read the command and status register
* together (32-bit read at offset 0x04)
*
* These bits also apply to the secondary status
@@ -183,8 +183,8 @@
#define M_LDT_STATUS_DETPARERR _SB_MAKEMASK1_32(31)
/*
- * Bridge Control Register (Table 8-16). Note that these
- * constants assume you've read the register as a 32-bit
+ * Bridge Control Register (Table 8-16). Note that these
+ * constants assume you've read the register as a 32-bit
* read (offset 0x3C)
*/
diff --git a/include/asm-mips/sibyte/sb1250_mac.h b/include/asm-mips/sibyte/sb1250_mac.h
index 81f603f03a98..18e74e43f4a2 100644
--- a/include/asm-mips/sibyte/sb1250_mac.h
+++ b/include/asm-mips/sibyte/sb1250_mac.h
@@ -1,23 +1,23 @@
/* *********************************************************************
* SB1250 Board Support Package
- *
+ *
* MAC constants and macros File: sb1250_mac.h
- *
+ *
* This module contains constants and macros for the SB1250's
* ethernet controllers.
- *
+ *
* SB1250 specification level: User's manual 1/02/02
- *
+ *
* Author: Mitch Lichtenberg
- *
- *********************************************************************
+ *
+ *********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
@@ -311,7 +311,7 @@
/*
* These constants are used to configure the fields within the Frame
- * Configuration Register.
+ * Configuration Register.
*/
#define K_MAC_IFG_RX_10 _SB_MAKE64(0) /* See table 176, not used */
@@ -393,7 +393,7 @@
* Register: MAC_INT_MASK_2
*/
-/*
+/*
* Use these constants to shift the appropriate channel
* into the CH0 position so the same tests can be used
* on each channel.
diff --git a/include/asm-mips/sibyte/sb1250_mc.h b/include/asm-mips/sibyte/sb1250_mc.h
index 93a48334b874..1dd41c927996 100644
--- a/include/asm-mips/sibyte/sb1250_mc.h
+++ b/include/asm-mips/sibyte/sb1250_mc.h
@@ -1,23 +1,23 @@
/* *********************************************************************
* SB1250 Board Support Package
- *
- * Memory Controller constants File: sb1250_mc.h
- *
+ *
+ * Memory Controller constants File: sb1250_mc.h
+ *
* This module contains constants and macros useful for
* programming the memory controller.
- *
+ *
* SB1250 specification level: User's manual 1/02/02
- *
+ *
* Author: Mitch Lichtenberg
- *
- *********************************************************************
+ *
+ *********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
@@ -166,7 +166,7 @@
#define K_MC_REF_RATE_100MHz 0x62
#define K_MC_REF_RATE_133MHz 0x81
-#define K_MC_REF_RATE_200MHz 0xC4
+#define K_MC_REF_RATE_200MHz 0xC4
#define V_MC_REF_RATE_100MHz V_MC_REF_RATE(K_MC_REF_RATE_100MHz)
#define V_MC_REF_RATE_133MHz V_MC_REF_RATE(K_MC_REF_RATE_133MHz)
@@ -228,7 +228,7 @@
V_MC_ADDR_DRIVE_DEFAULT | \
V_MC_DATA_DRIVE_DEFAULT | \
V_MC_CLOCK_DRIVE_DEFAULT | \
- V_MC_REF_RATE_DEFAULT
+ V_MC_REF_RATE_DEFAULT
diff --git a/include/asm-mips/sibyte/sb1250_regs.h b/include/asm-mips/sibyte/sb1250_regs.h
index 5d496c6faba6..9db80cd13a79 100644
--- a/include/asm-mips/sibyte/sb1250_regs.h
+++ b/include/asm-mips/sibyte/sb1250_regs.h
@@ -1,23 +1,23 @@
/* *********************************************************************
* SB1250 Board Support Package
- *
+ *
* Register Definitions File: sb1250_regs.h
- *
+ *
* This module contains the addresses of the on-chip peripherals
* on the SB1250.
- *
+ *
* SB1250 specification level: 01/02/2002
- *
+ *
* Author: Mitch Lichtenberg
- *
- *********************************************************************
+ *
+ *********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
@@ -40,20 +40,20 @@
/* *********************************************************************
* Some general notes:
- *
+ *
* For the most part, when there is more than one peripheral
* of the same type on the SOC, the constants below will be
* offsets from the base of each peripheral. For example,
* the MAC registers are described as offsets from the first
* MAC register, and there will be a MAC_REGISTER() macro
- * to calculate the base address of a given MAC.
- *
+ * to calculate the base address of a given MAC.
+ *
* The information in this file is based on the SB1250 SOC
* manual version 0.2, July 2000.
********************************************************************* */
-/* *********************************************************************
+/* *********************************************************************
* Memory Controller Registers
********************************************************************* */
@@ -101,7 +101,7 @@
#define R_MC_TEST_ECC 0x0000000420
#define R_MC_MCLK_CFG 0x0000000500
-/* *********************************************************************
+/* *********************************************************************
* L2 Cache Control Registers
********************************************************************* */
@@ -126,7 +126,7 @@
#define A_L2_EEC_ADDRESS A_L2_ECC_TAG
-/* *********************************************************************
+/* *********************************************************************
* PCI Interface Registers
********************************************************************* */
@@ -134,7 +134,7 @@
#define A_PCI_TYPE01_HEADER 0x00DE000800
-/* *********************************************************************
+/* *********************************************************************
* Ethernet DMA and MACs
********************************************************************* */
@@ -184,7 +184,7 @@
(R_MAC_DMA_CHANNEL_BASE(txrx,chan) + \
(reg))
-/*
+/*
* DMA channel registers, relative to A_MAC_DMA_CHANNEL_BASE
*/
@@ -259,7 +259,7 @@
#define MAC_CHMAP_COUNT 4
-/* *********************************************************************
+/* *********************************************************************
* DUART Registers
********************************************************************* */
@@ -363,7 +363,7 @@
#endif /* 1250 PASS2 || 112x PASS1 */
-/* *********************************************************************
+/* *********************************************************************
* Synchronous Serial Registers
********************************************************************* */
@@ -397,7 +397,7 @@
(reg))
-/*
+/*
* DMA channel registers, relative to A_SER_DMA_CHANNEL_BASE
*/
@@ -457,7 +457,7 @@
#define R_SER_RMON_RX_ERRORS 0x000001F0
#define R_SER_RMON_RX_BADADDR 0x000001F8
-/* *********************************************************************
+/* *********************************************************************
* Generic Bus Registers
********************************************************************* */
@@ -513,7 +513,7 @@
#define R_IO_PCMCIA_CFG 0x0A60
#define R_IO_PCMCIA_STATUS 0x0A70
-/* *********************************************************************
+/* *********************************************************************
* GPIO Registers
********************************************************************* */
@@ -537,7 +537,7 @@
#define R_GPIO_PIN_CLR 0x30
#define R_GPIO_PIN_SET 0x38
-/* *********************************************************************
+/* *********************************************************************
* SMBus Registers
********************************************************************* */
@@ -573,7 +573,7 @@
#define R_SMB_CONTROL 0x0000000060
#define R_SMB_PEC 0x0000000070
-/* *********************************************************************
+/* *********************************************************************
* Timer Registers
********************************************************************* */
@@ -641,7 +641,7 @@
#endif /* 1250 PASS2 || 112x PASS1 */
-/* *********************************************************************
+/* *********************************************************************
* System Control Registers
********************************************************************* */
@@ -649,7 +649,7 @@
#define A_SCD_SYSTEM_CFG 0x0010020008
#define A_SCD_SYSTEM_MANUF 0x0010038000
-/* *********************************************************************
+/* *********************************************************************
* System Address Trap Registers
********************************************************************* */
@@ -672,7 +672,7 @@
#endif /* 1250 PASS2 || 112x PASS1 */
-/* *********************************************************************
+/* *********************************************************************
* System Interrupt Mapper Registers
********************************************************************* */
@@ -701,7 +701,7 @@
#define R_IMR_INTERRUPT_MAP_BASE 0x0200
#define R_IMR_INTERRUPT_MAP_COUNT 64
-/* *********************************************************************
+/* *********************************************************************
* System Performance Counter Registers
********************************************************************* */
@@ -711,7 +711,7 @@
#define A_SCD_PERF_CNT_2 0x00100204E0
#define A_SCD_PERF_CNT_3 0x00100204E8
-/* *********************************************************************
+/* *********************************************************************
* System Bus Watcher Registers
********************************************************************* */
@@ -726,13 +726,13 @@
#define A_BUS_L2_ERRORS 0x00100208C0
#define A_BUS_MEM_IO_ERRORS 0x00100208C8
-/* *********************************************************************
+/* *********************************************************************
* System Debug Controller Registers
********************************************************************* */
#define A_SCD_JTAG_BASE 0x0010000000
-/* *********************************************************************
+/* *********************************************************************
* System Trace Buffer Registers
********************************************************************* */
@@ -755,7 +755,7 @@
#define A_SCD_TRACE_SEQUENCE_6 0x0010020A90
#define A_SCD_TRACE_SEQUENCE_7 0x0010020A98
-/* *********************************************************************
+/* *********************************************************************
* System Generic DMA Registers
********************************************************************* */
diff --git a/include/asm-mips/sibyte/sb1250_scd.h b/include/asm-mips/sibyte/sb1250_scd.h
index 22e8041959e2..dbbd682fb47e 100644
--- a/include/asm-mips/sibyte/sb1250_scd.h
+++ b/include/asm-mips/sibyte/sb1250_scd.h
@@ -1,23 +1,23 @@
/* *********************************************************************
* SB1250 Board Support Package
- *
+ *
* SCD Constants and Macros File: sb1250_scd.h
- *
+ *
* This module contains constants and macros useful for
* manipulating the System Control and Debug module on the 1250.
- *
+ *
* SB1250 specification level: User's manual 1/02/02
- *
+ *
* Author: Mitch Lichtenberg
- *
- *********************************************************************
+ *
+ *********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
@@ -130,40 +130,40 @@
/* System Manufacturing Register
* Register: SCD_SYSTEM_MANUF
*/
-
+
/* Wafer ID: bits 31:0 */
#define S_SYS_WAFERID1_200 _SB_MAKE64(0)
#define M_SYS_WAFERID1_200 _SB_MAKEMASK(32,S_SYS_WAFERID1_200)
#define V_SYS_WAFERID1_200(x) _SB_MAKEVALUE(x,S_SYS_WAFERID1_200)
#define G_SYS_WAFERID1_200(x) _SB_GETVALUE(x,S_SYS_WAFERID1_200,M_SYS_WAFERID1_200)
-
+
#define S_SYS_BIN _SB_MAKE64(32)
#define M_SYS_BIN _SB_MAKEMASK(4,S_SYS_BIN)
#define V_SYS_BIN _SB_MAKEVALUE(x,S_SYS_BIN)
#define G_SYS_BIN _SB_GETVALUE(x,S_SYS_BIN,M_SYS_BIN)
-
+
/* Wafer ID: bits 39:36 */
#define S_SYS_WAFERID2_200 _SB_MAKE64(36)
#define M_SYS_WAFERID2_200 _SB_MAKEMASK(4,S_SYS_WAFERID2_200)
#define V_SYS_WAFERID2_200(x) _SB_MAKEVALUE(x,S_SYS_WAFERID2_200)
#define G_SYS_WAFERID2_200(x) _SB_GETVALUE(x,S_SYS_WAFERID2_200,M_SYS_WAFERID2_200)
-
+
/* Wafer ID: bits 39:0 */
#define S_SYS_WAFERID_300 _SB_MAKE64(0)
#define M_SYS_WAFERID_300 _SB_MAKEMASK(40,S_SYS_WAFERID_300)
#define V_SYS_WAFERID_300(x) _SB_MAKEVALUE(x,S_SYS_WAFERID_300)
#define G_SYS_WAFERID_300(x) _SB_GETVALUE(x,S_SYS_WAFERID_300,M_SYS_WAFERID_300)
-
+
#define S_SYS_XPOS _SB_MAKE64(40)
#define M_SYS_XPOS _SB_MAKEMASK(6,S_SYS_XPOS)
#define V_SYS_XPOS(x) _SB_MAKEVALUE(x,S_SYS_XPOS)
#define G_SYS_XPOS(x) _SB_GETVALUE(x,S_SYS_XPOS,M_SYS_XPOS)
-
+
#define S_SYS_YPOS _SB_MAKE64(46)
#define M_SYS_YPOS _SB_MAKEMASK(6,S_SYS_YPOS)
#define V_SYS_YPOS(x) _SB_MAKEVALUE(x,S_SYS_YPOS)
#define G_SYS_YPOS(x) _SB_GETVALUE(x,S_SYS_YPOS,M_SYS_YPOS)
-
+
/*
* System Config Register (Table 4-2)
* Register: SCD_SYSTEM_CFG
diff --git a/include/asm-mips/sibyte/sb1250_smbus.h b/include/asm-mips/sibyte/sb1250_smbus.h
index 287cbfe9efa2..335c53e92936 100644
--- a/include/asm-mips/sibyte/sb1250_smbus.h
+++ b/include/asm-mips/sibyte/sb1250_smbus.h
@@ -1,23 +1,23 @@
/* *********************************************************************
* SB1250 Board Support Package
- *
+ *
* SMBUS Constants File: sb1250_smbus.h
- *
- * This module contains constants and macros useful for
+ *
+ * This module contains constants and macros useful for
* manipulating the SB1250's SMbus devices.
- *
+ *
* SB1250 specification level: 01/02/2002
- *
+ *
* Author: Mitch Lichtenberg
- *
- *********************************************************************
+ *
+ *********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
diff --git a/include/asm-mips/sibyte/sb1250_syncser.h b/include/asm-mips/sibyte/sb1250_syncser.h
index 8d5e8edd3c4b..fa2760d38b8b 100644
--- a/include/asm-mips/sibyte/sb1250_syncser.h
+++ b/include/asm-mips/sibyte/sb1250_syncser.h
@@ -7,17 +7,17 @@
* manipulating the SB1250's Synchronous Serial
*
* SB1250 specification level: User's manual 1/02/02
- *
+ *
* Author: Mitch Lichtenberg
*
*********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
diff --git a/include/asm-mips/sibyte/sb1250_uart.h b/include/asm-mips/sibyte/sb1250_uart.h
index 7655d6945cca..923ea4f44e0f 100644
--- a/include/asm-mips/sibyte/sb1250_uart.h
+++ b/include/asm-mips/sibyte/sb1250_uart.h
@@ -1,23 +1,23 @@
/* *********************************************************************
* SB1250 Board Support Package
- *
+ *
* UART Constants File: sb1250_uart.h
- *
- * This module contains constants and macros useful for
+ *
+ * This module contains constants and macros useful for
* manipulating the SB1250's UARTs
*
* SB1250 specification level: User's manual 1/02/02
- *
+ *
* Author: Mitch Lichtenberg
- *
- *********************************************************************
+ *
+ *********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
********************************************************************* */
@@ -37,7 +37,7 @@
#include "sb1250_defs.h"
-/* **********************************************************************
+/* **********************************************************************
* DUART Registers
********************************************************************** */
@@ -145,7 +145,7 @@
#define V_DUART_MISC_CMD_START_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK)
#define V_DUART_MISC_CMD_STOP_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK)
-#define M_DUART_CMD_RESERVED _SB_MAKEMASK1(7)
+#define M_DUART_CMD_RESERVED _SB_MAKEMASK1(7)
/*
* DUART Status Register (Table 10-6)
@@ -165,7 +165,7 @@
/*
* DUART Baud Rate Register (Table 10-7)
- * Register: DUART_CLK_SEL_A
+ * Register: DUART_CLK_SEL_A
* Register: DUART_CLK_SEL_B
*/
@@ -332,7 +332,7 @@
(chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
-/*
+/*
* Full Interrupt Control Register
*/
diff --git a/include/asm-mips/sigcontext.h b/include/asm-mips/sigcontext.h
index 18939e84b6f2..f7fbebaa0744 100644
--- a/include/asm-mips/sigcontext.h
+++ b/include/asm-mips/sigcontext.h
@@ -10,7 +10,7 @@
#define _ASM_SIGCONTEXT_H
#include <asm/sgidefs.h>
-
+
#if _MIPS_SIM == _MIPS_SIM_ABI32
/*
@@ -38,7 +38,7 @@ struct sigcontext {
};
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
-
+
#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
/*
diff --git a/include/asm-mips/socket.h b/include/asm-mips/socket.h
index d478a86294ee..753b6620e6fa 100644
--- a/include/asm-mips/socket.h
+++ b/include/asm-mips/socket.h
@@ -82,7 +82,7 @@ To add: #define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */
* @SOCK_STREAM - stream (connection) socket
* @SOCK_RAW - raw socket
* @SOCK_RDM - reliably-delivered message
- * @SOCK_SEQPACKET - sequential packet socket
+ * @SOCK_SEQPACKET - sequential packet socket
* @SOCK_PACKET - linux specific way of getting packets at the dev level.
* For writing rarp and other similar things on the user level.
*/
diff --git a/include/asm-mips/statfs.h b/include/asm-mips/statfs.h
index 5076fec65780..c3ddf973c1c0 100644
--- a/include/asm-mips/statfs.h
+++ b/include/asm-mips/statfs.h
@@ -57,7 +57,7 @@ struct statfs64 {
};
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
-
+
#if _MIPS_SIM == _MIPS_SIM_ABI64
struct statfs64 { /* Same as struct statfs */
diff --git a/include/asm-mips/titan_dep.h b/include/asm-mips/titan_dep.h
index fd9599e40a0a..fee1908c65d2 100644
--- a/include/asm-mips/titan_dep.h
+++ b/include/asm-mips/titan_dep.h
@@ -228,4 +228,4 @@ extern unsigned long ocd_base;
#define RM9K_READ_8(ofs, val) *(val) = *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs)
#define RM9K_READ_16(ofs, val) *(val) = *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs)
-#endif
+#endif
diff --git a/include/asm-mips/tx4927/tx4927.h b/include/asm-mips/tx4927/tx4927.h
index 5d939db6e220..3bb7f0087d68 100644
--- a/include/asm-mips/tx4927/tx4927.h
+++ b/include/asm-mips/tx4927/tx4927.h
@@ -45,14 +45,14 @@
/* TX4927 SDRAM controller (64-bit registers) */
-#define TX4927_SDRAMC_BASE 0x8000
-#define TX4927_SDRAMC_SDCCR0 0x8000
+#define TX4927_SDRAMC_BASE 0x8000
+#define TX4927_SDRAMC_SDCCR0 0x8000
#define TX4927_SDRAMC_SDCCR1 0x8008
#define TX4927_SDRAMC_SDCCR2 0x8010
#define TX4927_SDRAMC_SDCCR3 0x8018
#define TX4927_SDRAMC_SDCTR 0x8040
#define TX4927_SDRAMC_SDCMD 0x8058
-#define TX4927_SDRAMC_LIMIT 0x8fff
+#define TX4927_SDRAMC_LIMIT 0x8fff
/* TX4927 external bus controller (64-bit registers) */
@@ -289,8 +289,8 @@
/* TX4927 serial port 0 (32-bit registers) */
-#define TX4927_SIO0_BASE 0xf300
-#define TX4927_SIO0_SILCR0 0xf300
+#define TX4927_SIO0_BASE 0xf300
+#define TX4927_SIO0_SILCR0 0xf300
#define TX4927_SIO0_SILCR0_RESERVED_16_31 BM_16_31
#define TX4927_SIO0_SILCR0_RWUB BM_15_15
#define TX4927_SIO0_SILCR0_TWUB BM_14_14
@@ -309,7 +309,7 @@
#define TX4927_SIO0_SILCR0_UMODE_DATA_7_BIT (~BM_00_01)
#define TX4927_SIO0_SILCR0_UMODE_DATA_8_BIT_MC BM_01_01
#define TX4927_SIO0_SILCR0_UMODE_DATA_7_BIT_MC BM_00_01
-#define TX4927_SIO0_SIDICR0 0xf304
+#define TX4927_SIO0_SIDICR0 0xf304
#define TX4927_SIO0_SIDICR0_RESERVED_16_31 BM_16_31
#define TX4927_SIO0_SIDICR0_TDE BM_15_15
#define TX4927_SIO0_SIDICR0_RDE BM_14_14
@@ -330,7 +330,7 @@
#define TX4927_SIO0_SIDICR0_STIE_TRDY BM_02_02
#define TX4927_SIO0_SIDICR0_STIE_TXALS BM_01_01
#define TX4927_SIO0_SIDICR0_STIE_UBRKD BM_00_00
-#define TX4927_SIO0_SIDISR0 0xf308
+#define TX4927_SIO0_SIDISR0 0xf308
#define TX4927_SIO0_SIDISR0_RESERVED_16_31 BM_16_31
#define TX4927_SIO0_SIDISR0_UBRK BM_15_15
#define TX4927_SIO0_SIDISR0_UVALID BM_14_14
@@ -344,7 +344,7 @@
#define TX4927_SIO0_SIDISR0_STIS BM_06_06
#define TX4927_SIO0_SIDISR0_RESERVED_05_05 BM_05_05
#define TX4927_SIO0_SIDISR0_RFDN BM_00_04
-#define TX4927_SIO0_SISCISR0 0xf30c
+#define TX4927_SIO0_SISCISR0 0xf30c
#define TX4927_SIO0_SISCISR0_RESERVED_06_31 BM_06_31
#define TX4927_SIO0_SISCISR0_OERS BM_05_05
#define TX4927_SIO0_SISCISR0_CTSS BM_04_04
@@ -352,7 +352,7 @@
#define TX4927_SIO0_SISCISR0_TRDY BM_02_02
#define TX4927_SIO0_SISCISR0_TXALS BM_01_01
#define TX4927_SIO0_SISCISR0_UBRKD BM_00_00
-#define TX4927_SIO0_SIFCR0 0xf310
+#define TX4927_SIO0_SIFCR0 0xf310
#define TX4927_SIO0_SIFCR0_RESERVED_16_31 BM_16_31
#define TX4927_SIO0_SIFCR0_SWRST BM_16_31
#define TX4927_SIO0_SIFCR0_RESERVED_09_14 BM_09_14
@@ -370,7 +370,7 @@
#define TX4927_SIO0_SIFCR0_TFRST BM_02_02
#define TX4927_SIO0_SIFCR0_RFRST BM_01_01
#define TX4927_SIO0_SIFCR0_FRSTE BM_00_00
-#define TX4927_SIO0_SIFLCR0 0xf314
+#define TX4927_SIO0_SIFLCR0 0xf314
#define TX4927_SIO0_SIFLCR0_RESERVED_13_31 BM_13_31
#define TX4927_SIO0_SIFLCR0_RCS BM_12_12
#define TX4927_SIO0_SIFLCR0_TES BM_11_11
@@ -381,7 +381,7 @@
#define TX4927_SIO0_SIFLCR0_RESERVED_05_06 BM_05_06
#define TX4927_SIO0_SIFLCR0_RTSTL BM_01_04
#define TX4927_SIO0_SIFLCR0_TBRK BM_00_00
-#define TX4927_SIO0_SIBGR0 0xf318
+#define TX4927_SIO0_SIBGR0 0xf318
#define TX4927_SIO0_SIBGR0_RESERVED_10_31 BM_10_31
#define TX4927_SIO0_SIBGR0_BCLK BM_08_09
#define TX4927_SIO0_SIBGR0_BCLK_T0 (~BM_08_09)
@@ -389,28 +389,28 @@
#define TX4927_SIO0_SIBGR0_BCLK_T4 BM_09_09
#define TX4927_SIO0_SIBGR0_BCLK_T6 BM_08_09
#define TX4927_SIO0_SIBGR0_BRD BM_00_07
-#define TX4927_SIO0_SITFIF00 0xf31c
+#define TX4927_SIO0_SITFIF00 0xf31c
#define TX4927_SIO0_SITFIF00_RESERVED_08_31 BM_08_31
#define TX4927_SIO0_SITFIF00_TXD BM_00_07
-#define TX4927_SIO0_SIRFIFO0 0xf320
+#define TX4927_SIO0_SIRFIFO0 0xf320
#define TX4927_SIO0_SIRFIFO0_RESERVED_08_31 BM_08_31
#define TX4927_SIO0_SIRFIFO0_RXD BM_00_07
-#define TX4927_SIO0_SIRFIFO0 0xf320
-#define TX4927_SIO0_LIMIT 0xf3ff
+#define TX4927_SIO0_SIRFIFO0 0xf320
+#define TX4927_SIO0_LIMIT 0xf3ff
/* TX4927 serial port 1 (32-bit registers) */
-#define TX4927_SIO1_BASE 0xf400
-#define TX4927_SIO1_SILCR1 0xf400
-#define TX4927_SIO1_SIDICR1 0xf404
-#define TX4927_SIO1_SIDISR1 0xf408
-#define TX4927_SIO1_SISCISR1 0xf40c
-#define TX4927_SIO1_SIFCR1 0xf410
-#define TX4927_SIO1_SIFLCR1 0xf414
-#define TX4927_SIO1_SIBGR1 0xf418
-#define TX4927_SIO1_SITFIF01 0xf41c
-#define TX4927_SIO1_SIRFIFO1 0xf420
-#define TX4927_SIO1_LIMIT 0xf4ff
+#define TX4927_SIO1_BASE 0xf400
+#define TX4927_SIO1_SILCR1 0xf400
+#define TX4927_SIO1_SIDICR1 0xf404
+#define TX4927_SIO1_SIDISR1 0xf408
+#define TX4927_SIO1_SISCISR1 0xf40c
+#define TX4927_SIO1_SIFCR1 0xf410
+#define TX4927_SIO1_SIFLCR1 0xf414
+#define TX4927_SIO1_SIBGR1 0xf418
+#define TX4927_SIO1_SITFIF01 0xf41c
+#define TX4927_SIO1_SIRFIFO1 0xf420
+#define TX4927_SIO1_LIMIT 0xf4ff
/* TX4927 parallel port (32-bit registers) */
diff --git a/include/asm-mips/tx4927/tx4927_pci.h b/include/asm-mips/tx4927/tx4927_pci.h
index 170433492246..165f6b8b217f 100644
--- a/include/asm-mips/tx4927/tx4927_pci.h
+++ b/include/asm-mips/tx4927/tx4927_pci.h
@@ -5,8 +5,8 @@
*
* Copyright (C) 2000-2001 Toshiba Corporation
*/
-#ifndef __ASM_TX4927_TX4927_PCI_H
-#define __ASM_TX4927_TX4927_PCI_H
+#ifndef __ASM_TX4927_TX4927_PCI_H
+#define __ASM_TX4927_TX4927_PCI_H
#define TX4927_CCFG_TOE 0x00004000
diff --git a/include/asm-mips/vr41xx/vrc4173.h b/include/asm-mips/vr41xx/vrc4173.h
index 58e193c51b45..bb7a85c186e4 100644
--- a/include/asm-mips/vr41xx/vrc4173.h
+++ b/include/asm-mips/vr41xx/vrc4173.h
@@ -21,8 +21,8 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __NEC_VRC4173_H
-#define __NEC_VRC4173_H
+#ifndef __NEC_VRC4173_H
+#define __NEC_VRC4173_H
#include <linux/config.h>
#include <asm/io.h>
diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h
index c4a704121343..04ee53b34c2e 100644
--- a/include/asm-mips/war.h
+++ b/include/asm-mips/war.h
@@ -113,7 +113,7 @@
*/
#define BCM1250_M3_WAR 1
-/*
+/*
* This is a DUART workaround related to glitches around register accesses
*/
#define SIBYTE_1956_WAR 1
@@ -122,7 +122,7 @@
/*
* Fill buffers not flushed on CACHE instructions
- *
+ *
* Hit_Invalidate_I cacheops invalidate an icache line but the refill
* for that line can get stale data from the fill buffer instead of
* accessing memory if the previous icache miss was also to that line.
diff --git a/include/asm-mips/xxs1500.h b/include/asm-mips/xxs1500.h
index 75c0ddfeca13..4d84a90b0f20 100644
--- a/include/asm-mips/xxs1500.h
+++ b/include/asm-mips/xxs1500.h
@@ -22,7 +22,7 @@
*
* ########################################################################
*
- *
+ *
*/
#ifndef __ASM_XXS1500_H
#define __ASM_XXS1500_H
OpenPOWER on IntegriCloud