diff options
| -rw-r--r-- | drivers/char/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/char/Makefile | 1 | ||||
| -rw-r--r-- | drivers/char/briq_panel.c | 268 |
3 files changed, 283 insertions, 0 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index c40e487d9f5c..11de59ff4229 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -495,6 +495,20 @@ config LEGACY_PTY_COUNT When not in use, each legacy PTY occupies 12 bytes on 32-bit architectures and 24 bytes on 64-bit architectures. +config BRIQ_PANEL + tristate 'Total Impact briQ front panel driver' + ---help--- + The briQ is a small footprint CHRP computer with a frontpanel VFD, a + tristate led and two switches. It is the size of a CDROM drive. + + If you have such one and want anything showing on the VFD then you + must answer Y here. + + To compile this driver as a module, choose M here: the + module will be called briq_panel. + + It's safe to say N here. + config PRINTER tristate "Parallel printer support" depends on PARPORT diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 6e0f4469d8bb..7a7ee5721279 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_VIOCONS) += viocons.o obj-$(CONFIG_VIOTAPE) += viotape.o obj-$(CONFIG_HVCS) += hvcs.o obj-$(CONFIG_SGI_MBCS) += mbcs.o +obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o obj-$(CONFIG_PRINTER) += lp.o obj-$(CONFIG_TIPAR) += tipar.o diff --git a/drivers/char/briq_panel.c b/drivers/char/briq_panel.c new file mode 100644 index 000000000000..a0e5eac5f33a --- /dev/null +++ b/drivers/char/briq_panel.c @@ -0,0 +1,268 @@ +/* + * Drivers for the Total Impact PPC based computer "BRIQ" + * by Dr. Karsten Jeppesen + * + */ + +#include <linux/module.h> + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/tty.h> +#include <linux/timer.h> +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/wait.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/miscdevice.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/init.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/prom.h> + +#define BRIQ_PANEL_MINOR 156 +#define BRIQ_PANEL_VFD_IOPORT 0x0390 +#define BRIQ_PANEL_LED_IOPORT 0x0398 +#define BRIQ_PANEL_VER "1.1 (04/20/2002)" +#define BRIQ_PANEL_MSG0 "Loading Linux" + +static int vfd_is_open; +static unsigned char vfd[40]; +static int vfd_cursor; +static unsigned char ledpb, led; + +static void update_vfd(void) +{ + int i; + + /* cursor home */ + outb(0x02, BRIQ_PANEL_VFD_IOPORT); + for (i=0; i<20; i++) + outb(vfd[i], BRIQ_PANEL_VFD_IOPORT + 1); + + /* cursor to next line */ + outb(0xc0, BRIQ_PANEL_VFD_IOPORT); + for (i=20; i<40; i++) + outb(vfd[i], BRIQ_PANEL_VFD_IOPORT + 1); + +} + +static void set_led(char state) +{ + if (state == 'R') + led = 0x01; + else if (state == 'G') + led = 0x02; + else if (state == 'Y') + led = 0x03; + else if (state == 'X') + led = 0x00; + outb(led, BRIQ_PANEL_LED_IOPORT); +} + +static int briq_panel_open(struct inode *ino, struct file *filep) +{ + /* enforce single access */ + if (vfd_is_open) + return -EBUSY; + vfd_is_open = 1; + + return 0; +} + +static int briq_panel_release(struct inode *ino, struct file *filep) +{ + if (!vfd_is_open) + return -ENODEV; + + vfd_is_open = 0; + + return 0; +} + +static ssize_t briq_panel_read(struct file *file, char *buf, size_t count, + loff_t *ppos) +{ + unsigned short c; + unsigned char cp; + +#if 0 /* Can't seek (pread) on this device */ + if (ppos != &file->f_pos) + return -ESPIPE; +#endif + + if (!vfd_is_open) + return -ENODEV; + + c = (inb(BRIQ_PANEL_LED_IOPORT) & 0x000c) | (ledpb & 0x0003); + set_led(' '); + /* upper button released */ + if ((!(ledpb & 0x0004)) && (c & 0x0004)) { + cp = ' '; + ledpb = c; + if (copy_to_user(buf, &cp, 1)) + return -EFAULT; + return 1; + } + /* lower button released */ + else if ((!(ledpb & 0x0008)) && (c & 0x0008)) { + cp = '\r'; + ledpb = c; + if (copy_to_user(buf, &cp, 1)) + return -EFAULT; + return 1; + } else { + ledpb = c; + return 0; + } +} + +static void scroll_vfd( void ) +{ + int i; + + for (i=0; i<20; i++) { + vfd[i] = vfd[i+20]; + vfd[i+20] = ' '; + } + vfd_cursor = 20; +} + +static ssize_t briq_panel_write(struct file *file, const char *buf, size_t len, + loff_t *ppos) +{ + size_t indx = len; + int i, esc = 0; + +#if 0 /* Can't seek (pwrite) on this device */ + if (ppos != &file->f_pos) + return -ESPIPE; +#endif + + if (!vfd_is_open) + return -EBUSY; + + for (;;) { + if (!indx) + break; + if (esc) { + set_led(*buf); + esc = 0; + } else if (*buf == 27) { + esc = 1; + } else if (*buf == 12) { + /* do a form feed */ + for (i=0; i<40; i++) + vfd[i] = ' '; + vfd_cursor = 0; + } else if (*buf == 10) { + if (vfd_cursor < 20) + vfd_cursor = 20; + else if (vfd_cursor < 40) + vfd_cursor = 40; + else if (vfd_cursor < 60) + vfd_cursor = 60; + if (vfd_cursor > 59) + scroll_vfd(); + } else { + /* just a character */ + if (vfd_cursor > 39) + scroll_vfd(); + vfd[vfd_cursor++] = *buf; + } + indx--; + buf++; + } + update_vfd(); + + return len; +} + +static struct file_operations briq_panel_fops = { + .owner = THIS_MODULE, + .read = briq_panel_read, + .write = briq_panel_write, + .open = briq_panel_open, + .release = briq_panel_release, +}; + +static struct miscdevice briq_panel_miscdev = { + BRIQ_PANEL_MINOR, + "briq_panel", + &briq_panel_fops +}; + +static int __init briq_panel_init(void) +{ + struct device_node *root = find_path_device("/"); + char *machine; + int i; + + machine = get_property(root, "model", NULL); + if (!machine || strncmp(machine, "TotalImpact,BRIQ-1", 18) != 0) + return -ENODEV; + + printk(KERN_INFO + "briq_panel: v%s Dr. Karsten Jeppesen (kj@totalimpact.com)\n", + BRIQ_PANEL_VER); + + if (!request_region(BRIQ_PANEL_VFD_IOPORT, 4, "BRIQ Front Panel")) + return -EBUSY; + + if (!request_region(BRIQ_PANEL_LED_IOPORT, 2, "BRIQ Front Panel")) { + release_region(BRIQ_PANEL_VFD_IOPORT, 4); + return -EBUSY; + } + ledpb = inb(BRIQ_PANEL_LED_IOPORT) & 0x000c; + + if (misc_register(&briq_panel_miscdev) < 0) { + release_region(BRIQ_PANEL_VFD_IOPORT, 4); + release_region(BRIQ_PANEL_LED_IOPORT, 2); + return -EBUSY; + } + + outb(0x38, BRIQ_PANEL_VFD_IOPORT); /* Function set */ + outb(0x01, BRIQ_PANEL_VFD_IOPORT); /* Clear display */ + outb(0x0c, BRIQ_PANEL_VFD_IOPORT); /* Display on */ + outb(0x06, BRIQ_PANEL_VFD_IOPORT); /* Entry normal */ + for (i=0; i<40; i++) + vfd[i]=' '; +#ifndef MODULE + vfd[0] = 'L'; + vfd[1] = 'o'; + vfd[2] = 'a'; + vfd[3] = 'd'; + vfd[4] = 'i'; + vfd[5] = 'n'; + vfd[6] = 'g'; + vfd[7] = ' '; + vfd[8] = '.'; + vfd[9] = '.'; + vfd[10] = '.'; +#endif /* !MODULE */ + + update_vfd(); + + return 0; +} + +static void __exit briq_panel_exit(void) +{ + misc_deregister(&briq_panel_miscdev); + release_region(BRIQ_PANEL_VFD_IOPORT, 4); + release_region(BRIQ_PANEL_LED_IOPORT, 2); +} + +module_init(briq_panel_init); +module_exit(briq_panel_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Karsten Jeppesen <karsten@jeppesens.com>"); +MODULE_DESCRIPTION("Driver for the Total Impact briQ front panel"); |
