diff options
| -rw-r--r-- | drivers/char/isicom.c | 91 |
1 files changed, 21 insertions, 70 deletions
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index a56491eb8978..51fa317e695c 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -193,7 +193,6 @@ struct isi_board { unsigned short shift_count; struct isi_port * ports; signed char count; - unsigned char isa; spinlock_t card_lock; /* Card wide lock 11/5/00 -sameer */ unsigned long flags; }; @@ -562,14 +561,12 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) base = card->base; spin_lock(&card->card_lock); - if (card->isa == NO) { - /* - * disable any interrupts from the PCI card and lower the - * interrupt line - */ - outw(0x8000, base+0x04); - ClearInterrupt(base); - } + /* + * disable any interrupts from the PCI card and lower the + * interrupt line + */ + outw(0x8000, base+0x04); + ClearInterrupt(base); inw(base); /* get the dummy word out */ header = inw(base); @@ -579,19 +576,13 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) if (channel + 1 > card->port_count) { printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): " "%d(channel) > port_count.\n", base, channel+1); - if (card->isa) - ClearInterrupt(base); - else - outw(0x0000, base+0x04); /* enable interrupts */ + outw(0x0000, base+0x04); /* enable interrupts */ spin_unlock(&card->card_lock); return IRQ_HANDLED; } port = card->ports + channel; if (!(port->flags & ASYNC_INITIALIZED)) { - if (card->isa) - ClearInterrupt(base); - else - outw(0x0000, base+0x04); /* enable interrupts */ + outw(0x0000, base+0x04); /* enable interrupts */ return IRQ_HANDLED; } @@ -604,10 +595,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) } if (byte_count & 0x01) inw(base); - if (card->isa == YES) - ClearInterrupt(base); - else - outw(0x0000, base+0x04); /* enable interrupts */ + outw(0x0000, base+0x04); /* enable interrupts */ spin_unlock(&card->card_lock); return IRQ_HANDLED; } @@ -708,10 +696,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id) } tty_flip_buffer_push(tty); } - if (card->isa == YES) - ClearInterrupt(base); - else - outw(0x0000, base+0x04); /* enable interrupts */ + outw(0x0000, base+0x04); /* enable interrupts */ return IRQ_HANDLED; } @@ -1561,36 +1546,23 @@ static int __devinit reset_card(struct pci_dev *pdev, *signature = inw(base + 0x4) & 0xff; - if (board->isa == YES) { - if (!(inw(base + 0xe) & 0x1) || (inw(base + 0x2))) { - dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n", - inw(base + 0x2), inw(base + 0xe)); - dev_err(&pdev->dev, "ISILoad:ISA Card%d reset failure " - "(Possible bad I/O Port Address 0x%lx).\n", - card + 1, base); - retval = -EIO; - goto end; - } - } else { - portcount = inw(base + 0x2); - if (!(inw(base + 0xe) & 0x1) || ((portcount != 0) && - (portcount != 4) && (portcount != 8))) { - dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n", - inw(base + 0x2), inw(base + 0xe)); - dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure " - "(Possible bad I/O Port Address 0x%lx).\n", - card + 1, base); - retval = -EIO; - goto end; - } + portcount = inw(base + 0x2); + if (!(inw(base + 0xe) & 0x1) || ((portcount != 0) && + (portcount != 4) && (portcount != 8))) { + dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n", + inw(base + 0x2), inw(base + 0xe)); + dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure " + "(Possible bad I/O Port Address 0x%lx).\n", + card + 1, base); + retval = -EIO; + goto end; } switch (*signature) { case 0xa5: case 0xbb: case 0xdd: - board->port_count = (board->isa == NO && portcount == 4) ? 4 : - 8; + board->port_count = (portcount == 4) ? 4 : 8; board->shift_count = 12; break; case 0xcc: @@ -1784,8 +1756,6 @@ end: /* * Insmod can set static symbols so keep these static */ -static int io[4]; -static int irq[4]; static int card; static int __devinit isicom_probe(struct pci_dev *pdev, @@ -1813,7 +1783,6 @@ static int __devinit isicom_probe(struct pci_dev *pdev, board->base = ioaddr; board->irq = pciirq; - board->isa = NO; card++; pci_set_drvdata(pdev, board); @@ -1888,20 +1857,6 @@ static int __init isicom_init(void) } isi_card[idx].base = 0; isi_card[idx].irq = 0; - - if (!io[idx]) - continue; - - if (irq[idx] == 2 || irq[idx] == 3 || irq[idx] == 4 || - irq[idx] == 5 || irq[idx] == 7 || - irq[idx] == 10 || irq[idx] == 11 || - irq[idx] == 12 || irq[idx] == 15) { - printk(KERN_ERR "ISICOM: ISA not supported yet.\n"); - retval = -EINVAL; - goto error; - } else - printk(KERN_ERR "ISICOM: Irq %d unsupported. " - "Disabling Card%d...\n", irq[idx], idx + 1); } /* tty driver structure initialization */ @@ -1971,7 +1926,3 @@ module_exit(isicom_exit); MODULE_AUTHOR("MultiTech"); MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech"); MODULE_LICENSE("GPL"); -module_param_array(io, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O ports for the cards"); -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(irq, "Interrupts for the cards"); |
