diff options
389 files changed, 10476 insertions, 4280 deletions
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 8918a32c6b3a..b1eb661e6302 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -143,7 +143,8 @@ quiet_cmd_db2pdf = PDF $@ $(call cmd,db2pdf) -main_idx = Documentation/DocBook/index.html +index = index.html +main_idx = Documentation/DocBook/$(index) build_main_index = rm -rf $(main_idx) && \ echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \ echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \ @@ -232,7 +233,7 @@ clean-files := $(DOCBOOKS) \ $(patsubst %.xml, %.pdf, $(DOCBOOKS)) \ $(patsubst %.xml, %.html, $(DOCBOOKS)) \ $(patsubst %.xml, %.9, $(DOCBOOKS)) \ - $(C-procfs-example) + $(C-procfs-example) $(index) clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 76efe5b71d7d..3120f8dd2c31 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -512,16 +512,24 @@ locking rules: BKL mmap_sem PageLocked(page) open: no yes close: no yes -fault: no yes -page_mkwrite: no yes no +fault: no yes can return with page locked +page_mkwrite: no yes can return with page locked access: no yes - ->page_mkwrite() is called when a previously read-only page is -about to become writeable. The file system is responsible for -protecting against truncate races. Once appropriate action has been -taking to lock out truncate, the page range should be verified to be -within i_size. The page mapping should also be checked that it is not -NULL. + ->fault() is called when a previously not present pte is about +to be faulted in. The filesystem must find and return the page associated +with the passed in "pgoff" in the vm_fault structure. If it is possible that +the page may be truncated and/or invalidated, then the filesystem must lock +the page, then ensure it is not already truncated (the page lock will block +subsequent truncate), and then return with VM_FAULT_LOCKED, and the page +locked. The VM will unlock the page. + + ->page_mkwrite() is called when a previously read-only pte is +about to become writeable. The filesystem again must ensure that there are +no truncate/invalidate races, and then return with the page locked. If +the page has been truncated, the filesystem should not look up a new page +like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which +will cause the VM to retry the fault. ->access() is called when get_user_pages() fails in acces_process_vm(), typically used to debug a process through diff --git a/Documentation/input/bcm5974.txt b/Documentation/input/bcm5974.txt new file mode 100644 index 000000000000..5e22dcf6d48d --- /dev/null +++ b/Documentation/input/bcm5974.txt @@ -0,0 +1,65 @@ +BCM5974 Driver (bcm5974) +------------------------ + Copyright (C) 2008-2009 Henrik Rydberg <rydberg@euromail.se> + +The USB initialization and package decoding was made by Scott Shawcroft as +part of the touchd user-space driver project: + Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com) + +The BCM5974 driver is based on the appletouch driver: + Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) + Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net) + Copyright (C) 2005 Stelian Pop (stelian@popies.net) + Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) + Copyright (C) 2005 Peter Osterlund (petero2@telia.com) + Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch) + Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch) + +This driver adds support for the multi-touch trackpad on the new Apple +Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on +those computers, and integrates well with the synaptics driver of the Xorg +system. + +Known to work on Macbook Air, Macbook Pro Penryn and the new unibody +Macbook 5 and Macbook Pro 5. + +Usage +----- + +The driver loads automatically for the supported usb device ids, and +becomes available both as an event device (/dev/input/event*) and as a +mouse via the mousedev driver (/dev/input/mice). + +USB Race +-------- + +The Apple multi-touch trackpads report both mouse and keyboard events via +different interfaces of the same usb device. This creates a race condition +with the HID driver, which, if not told otherwise, will find the standard +HID mouse and keyboard, and claim the whole device. To remedy, the usb +product id must be listed in the mouse_ignore list of the hid driver. + +Debug output +------------ + +To ease the development for new hardware version, verbose packet output can +be switched on with the debug kernel module parameter. The range [1-9] +yields different levels of verbosity. Example (as root): + +echo -n 9 > /sys/module/bcm5974/parameters/debug + +tail -f /var/log/debug + +echo -n 0 > /sys/module/bcm5974/parameters/debug + +Trivia +------ + +The driver was developed at the ubuntu forums in June 2008 [1], and now has +a more permanent home at bitmath.org [2]. + +Links +----- + +[1] http://ubuntuforums.org/showthread.php?t=840040 +[2] http://http://bitmath.org/code/ diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt new file mode 100644 index 000000000000..9f09557aea39 --- /dev/null +++ b/Documentation/input/multi-touch-protocol.txt @@ -0,0 +1,140 @@ +Multi-touch (MT) Protocol +------------------------- + Copyright (C) 2009 Henrik Rydberg <rydberg@euromail.se> + + +Introduction +------------ + +In order to utilize the full power of the new multi-touch devices, a way to +report detailed finger data to user space is needed. This document +describes the multi-touch (MT) protocol which allows kernel drivers to +report details for an arbitrary number of fingers. + + +Usage +----- + +Anonymous finger details are sent sequentially as separate packets of ABS +events. Only the ABS_MT events are recognized as part of a finger +packet. The end of a packet is marked by calling the input_mt_sync() +function, which generates a SYN_MT_REPORT event. The end of multi-touch +transfer is marked by calling the usual input_sync() function. + +A set of ABS_MT events with the desired properties is defined. The events +are divided into categories, to allow for partial implementation. The +minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and +ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the +device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size +of the approaching finger. Anisotropy and direction may be specified with +ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with +more granular information may specify general shapes as blobs, i.e., as a +sequence of rectangular shapes grouped together by an +ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify +whether the touching tool is a finger or a pen or something else. + + +Event Semantics +--------------- + +The word "contact" is used to describe a tool which is in direct contact +with the surface. A finger, a pen or a rubber all classify as contacts. + +ABS_MT_TOUCH_MAJOR + +The length of the major axis of the contact. The length should be given in +surface units. If the surface has an X times Y resolution, the largest +possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal. + +ABS_MT_TOUCH_MINOR + +The length, in surface units, of the minor axis of the contact. If the +contact is circular, this event can be omitted. + +ABS_MT_WIDTH_MAJOR + +The length, in surface units, of the major axis of the approaching +tool. This should be understood as the size of the tool itself. The +orientation of the contact and the approaching tool are assumed to be the +same. + +ABS_MT_WIDTH_MINOR + +The length, in surface units, of the minor axis of the approaching +tool. Omit if circular. + +The above four values can be used to derive additional information about +the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates +the notion of pressure. The fingers of the hand and the palm all have +different characteristic widths [1]. + +ABS_MT_ORIENTATION + +The orientation of the ellipse. The value should describe half a revolution +clockwise around the touch center. The scale of the value is arbitrary, but +zero should be returned for an ellipse aligned along the Y axis of the +surface. As an example, an index finger placed straight onto the axis could +return zero orientation, something negative when twisted to the left, and +something positive when twisted to the right. This value can be omitted if +the touching object is circular, or if the information is not available in +the kernel driver. + +ABS_MT_POSITION_X + +The surface X coordinate of the center of the touching ellipse. + +ABS_MT_POSITION_Y + +The surface Y coordinate of the center of the touching ellipse. + +ABS_MT_TOOL_TYPE + +The type of approaching tool. A lot of kernel drivers cannot distinguish +between different tool types, such as a finger or a pen. In such cases, the +event should be omitted. The protocol currently supports MT_TOOL_FINGER and +MT_TOOL_PEN [2]. + +ABS_MT_BLOB_ID + +The BLOB_ID groups several packets together into one arbitrarily shaped +contact. This is a low-level anonymous grouping, and should not be confused +with the high-level contactID, explained below. Most kernel drivers will +not have this capability, and can safely omit the event. + + +Finger Tracking +--------------- + +The kernel driver should generate an arbitrary enumeration of the set of +anonymous contacts currently on the surface. The order in which the packets +appear in the event stream is not important. + +The process of finger tracking, i.e., to assign a unique contactID to each +initiated contact on the surface, is left to user space; preferably the +multi-touch X driver [3]. In that driver, the contactID stays the same and +unique until the contact vanishes (when the finger leaves the surface). The +problem of assigning a set of anonymous fingers to a set of identified +fingers is a euclidian bipartite matching problem at each event update, and +relies on a sufficiently rapid update rate. + +Notes +----- + +In order to stay compatible with existing applications, the data +reported in a finger packet must not be recognized as single-touch +events. In addition, all finger data must bypass input filtering, +since subsequent events of the same type refer to different fingers. + +The first kernel driver to utilize the MT protocol is the bcm5974 driver, +where examples can be found. + +[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the +difference between the contact position and the approaching tool position +could be used to derive tilt. +[2] The list can of course be extended. +[3] The multi-touch X driver is currently in the prototyping stage. At the +time of writing (April 2009), the MT protocol is not yet merged, and the +prototype implements finger matching, basic mouse support and two-finger +scrolling. The project aims at improving the quality of current multi-touch +functionality available in the synaptics X driver, and in addition +implement more advanced gestures. diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt index 026ec7d57384..4d04572b6549 100644 --- a/Documentation/kernel-doc-nano-HOWTO.txt +++ b/Documentation/kernel-doc-nano-HOWTO.txt @@ -269,7 +269,10 @@ Use the argument mechanism to document members or constants. Inside a struct description, you can use the "private:" and "public:" comment tags. Structure fields that are inside a "private:" area -are not listed in the generated output documentation. +are not listed in the generated output documentation. The "private:" +and "public:" tags must begin immediately following a "/*" comment +marker. They may optionally include comments between the ":" and the +ending "*/" marker. Example: @@ -283,7 +286,7 @@ Example: struct my_struct { int a; int b; -/* private: */ +/* private: internal use only */ int c; }; diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 90b3924071b6..e87bdbfbcc75 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus usbcore.blinkenlights=1 +Hyphens (dashes) and underscores are equivalent in parameter names, so + log_buf_len=1M print-fatal-signals=1 +can also be entered as + log-buf-len=1M print_fatal_signals=1 + + This document may not be entirely up to date and comprehensive. The command "modinfo -p ${modulename}" shows a current list of all parameters of a loadable module. Loadable modules, after being loaded into the running kernel, also @@ -345,7 +351,7 @@ and is between 256 and 4096 characters. It is defined in the file not play well with APC CPU idle - disable it if you have APC and your system crashes randomly. - apic= [APIC,i386] Advanced Programmable Interrupt Controller + apic= [APIC,X86-32] Advanced Programmable Interrupt Controller Change the output verbosity whilst booting Format: { quiet (default) | verbose | debug } Change the amount of debugging information output @@ -702,7 +708,7 @@ and is between 256 and 4096 characters. It is defined in the file to discrete, to make X server driver able to add WB entry later. This parameter enables that. - enable_timer_pin_1 [i386,x86-64] + enable_timer_pin_1 [X86] Enable PIN 1 of APIC timer Can be useful to work around chipset bugs (in particular on some ATI chipsets). @@ -775,7 +781,7 @@ and is between 256 and 4096 characters. It is defined in the file hashdist= [KNL,NUMA] Large hashes allocated during boot are distributed across NUMA nodes. Defaults on - for IA-64, off otherwise. + for 64bit NUMA, off otherwise. Format: 0 | 1 (for off | on) hcl= [IA-64] SGI's Hardware Graph compatibility layer diff --git a/Documentation/lockdep-design.txt b/Documentation/lockdep-design.txt index 938ea22f2cc0..e20d913d5914 100644 --- a/Documentation/lockdep-design.txt +++ b/Documentation/lockdep-design.txt @@ -54,9 +54,9 @@ locking error messages, inside curlies. A contrived example: The bit position indicates STATE, STATE-read, for each of the states listed above, and the character displayed in each indicates: - '.' acquired while irqs disabled - '+' acquired in irq context - '-' acquired with irqs enabled + '.' acquired while irqs disabled and not in irq context + '-' acquired in irq context + '+' acquired with irqs enabled '?' acquired in irq context with irqs enabled. Unused mutexes cannot be part of the cause of an error. diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 97c4b3284329..b716d33912d8 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -90,6 +90,10 @@ will itself start writeback. If dirty_bytes is written, dirty_ratio becomes a function of its value (dirty_bytes / the amount of dirtyable system memory). +Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any +value lower than this limit will be ignored and the old configuration will be +retained. + ============================================================== dirty_expire_centisecs diff --git a/MAINTAINERS b/MAINTAINERS index c547f4a2bb62..2b349ba4add4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3434,11 +3434,10 @@ L: linuxppc-dev@ozlabs.org S: Maintained LINUX FOR POWERPC EMBEDDED MPC5XXX -P: Sylvain Munaut -M: tnt@246tNt.com P: Grant Likely M: grant.likely@secretlab.ca L: linuxppc-dev@ozlabs.org +T: git git://git.secretlab.ca/git/linux-2.6.git S: Maintained LINUX FOR POWERPC EMBEDDED PPC4XX @@ -3456,6 +3455,7 @@ P: Grant Likely M: grant.likely@secretlab.ca W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex L: linuxppc-dev@ozlabs.org +T: git git://git.secretlab.ca/git/linux-2.6.git S: Maintained LINUX FOR POWERPC EMBEDDED PPC8XX @@ -4189,7 +4189,7 @@ P: Joel Becker M: joel.becker@oracle.com L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers) W: http://oss.oracle.com/projects/ocfs2/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git S: Supported F: Documentation/filesystems/ocfs2.txt F: Documentation/filesystems/dlmfs.txt @@ -4521,6 +4521,19 @@ M: jim@jtan.com L: cbe-oss-dev@ozlabs.org S: Maintained +PTRACE SUPPORT +P: Roland McGrath +M: roland@redhat.com +P: Oleg Nesterov +M: oleg@redhat.com +L: linux-kernel@vger.kernel.org +S: Maintained +F: include/asm-generic/syscall.h +F: include/linux/ptrace.h +F: include/linux/regset.h +F: include/linux/tracehook.h +F: kernel/ptrace.c + PVRUSB2 VIDEO4LINUX DRIVER P: Mike Isely M: isely@pobox.com @@ -4666,13 +4679,13 @@ F: kernel/rcutorture.c RDC R-321X SoC P: Florian Fainelli -M: florian.fainelli@telecomint.eu +M: florian@openwrt.org L: linux-kernel@vger.kernel.org S: Maintained RDC R6040 FAST ETHERNET DRIVER P: Florian Fainelli -M: florian.fainelli@telecomint.eu +M: florian@openwrt.org L: netdev@vger.kernel.org S: Maintained F: drivers/net/r6040.c @@ -1293,7 +1293,7 @@ help: @echo ' dir/ - Build all files in dir and below' @echo ' dir/file.[ois] - Build specified target only' @echo ' dir/file.ko - Build module including final link' - @echo ' prepare - Set up for building external modules' + @echo ' modules_prepare - Set up for building external modules' @echo ' tags/TAGS - Generate tags file for editors' @echo ' cscope - Generate cscope index' @echo ' kernelrelease - Output the release version string' @@ -1421,7 +1421,9 @@ $(clean-dirs): $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) clean: rm-dirs := $(MODVERDIR) -clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers +clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \ + $(KBUILD_EXTMOD)/Module.markers \ + $(KBUILD_EXTMOD)/modules.order clean: $(clean-dirs) $(call cmd,rmdirs) $(call cmd,rmfiles) diff --git a/arch/alpha/include/asm/barrier.h b/arch/alpha/include/asm/barrier.h index ac78eba909bc..ce8860a0b32d 100644 --- a/arch/alpha/include/asm/barrier.h +++ b/arch/alpha/include/asm/barrier.h @@ -16,11 +16,13 @@ __asm__ __volatile__("wmb": : :"memory") __asm__ __volatile__("mb": : :"memory") #ifdef CONFIG_SMP +#define __ASM_SMP_MB "\tmb\n" #define smp_mb() mb() #define smp_rmb() rmb() #define smp_wmb() wmb() #define smp_read_barrier_depends() read_barrier_depends() #else +#define __ASM_SMP_MB #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h index 6a332a9f099c..945de222ab91 100644 --- a/arch/alpha/include/asm/futex.h +++ b/arch/alpha/include/asm/futex.h @@ -1,6 +1,116 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H +#ifndef _ASM_ALPHA_FUTEX_H +#define _ASM_ALPHA_FUTEX_H -#include <asm-generic/futex.h> +#ifdef __KERNEL__ -#endif +#include <linux/futex.h> +#include <linux/uaccess.h> +#include <asm/errno.h> +#include <asm/barrier.h> + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ + __asm__ __volatile__( \ + __ASM_SMP_MB \ + "1: ldl_l %0,0(%2)\n" \ + insn \ + "2: stl_c %1,0(%2)\n" \ + " beq %1,4f\n" \ + " mov $31,%1\n" \ + "3: .subsection 2\n" \ + "4: br 1b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .long 1b-.\n" \ + " lda $31,3b-1b(%1)\n" \ + " .long 2b-.\n" \ + " lda $31,3b-2b(%1)\n" \ + " .previous\n" \ + : "=&r" (oldval), "=&r"(ret) \ + : "r" (uaddr), "r"(oparg) \ + : "memory") + +static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + __futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + int prev, cmp; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + __asm__ __volatile__ ( + __ASM_SMP_MB + "1: ldl_l %0,0(%2)\n" + " cmpeq %0,%3,%1\n" + " beq %1,3f\n" + " mov %4,%1\n" + "2: stl_c %1,0(%2)\n" + " beq %1,4f\n" + "3: .subsection 2\n" + "4: br 1b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + " .long 1b-.\n" + " lda $31,3b-1b(%0)\n" + " .long 2b-.\n" + " lda $31,3b-2b(%0)\n" + " .previous\n" + : "=&r"(prev), "=&r"(cmp) + : "r"(uaddr), "r"((long)oldval), "r"(newval) + : "memory"); + + return prev; +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_ALPHA_FUTEX_H */ diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h index 163f3053001c..b49ec2f8d6e3 100644 --- a/arch/alpha/include/asm/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h @@ -507,5 +507,7 @@ struct exception_table_entry (pc) + (_fixup)->fixup.bits.nextinsn; \ }) +#define ARCH_HAS_SORT_EXTABLE +#define ARCH_HAS_SEARCH_EXTABLE #endif /* __ALPHA_UACCESS_H */ diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile index a427538252f8..7739a62440a7 100644 --- a/arch/alpha/kernel/Makefile +++ b/arch/alpha/kernel/Makefile @@ -8,7 +8,7 @@ EXTRA_CFLAGS := -Werror -Wno-sign-compare obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \ irq_alpha.o signal.o setup.o ptrace.o time.o \ - alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o + alpha_ksyms.o systbls.o err_common.o io.o obj-$(CONFIG_VGA_HOSE) += console.o obj-$(CONFIG_SMP) += smp.o @@ -43,6 +43,10 @@ else # Misc support obj-$(CONFIG_ALPHA_SRM) += srmcons.o +ifdef CONFIG_BINFMT_AOUT +obj-y += binfmt_loader.o +endif + # Core logic support obj-$(CONFIG_ALPHA_APECS) += core_apecs.o obj-$(CONFIG_ALPHA_CIA) += core_cia.o diff --git a/arch/alpha/kernel/binfmt_loader.c b/arch/alpha/kernel/binfmt_loader.c index 4a0af906b00a..3fcfad410130 100644 --- a/arch/alpha/kernel/binfmt_loader.c +++ b/arch/alpha/kernel/binfmt_loader.c @@ -46,6 +46,6 @@ static struct linux_binfmt loader_format = { static int __init init_loader_binfmt(void) { - return register_binfmt(&loader_format); + return insert_binfmt(&loader_format); } arch_initcall(init_loader_binfmt); diff --git a/arch/alpha/kernel/err_ev6.c b/arch/alpha/kernel/err_ev6.c index 985e5c1681ac..8ca6345bf131 100644 --- a/arch/alpha/kernel/err_ev6.c +++ b/arch/alpha/kernel/err_ev6.c @@ -229,7 +229,7 @@ ev6_process_logout_frame(struct el_common *mchk_header, int print) } void -ev6_machine_check(u64 vector, u64 la_ptr) +ev6_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; diff --git a/arch/alpha/kernel/err_ev7.c b/arch/alpha/kernel/err_ev7.c index 73770c6ca013..d738a67112d4 100644 --- a/arch/alpha/kernel/err_ev7.c +++ b/arch/alpha/kernel/err_ev7.c @@ -117,7 +117,7 @@ ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr, } void -ev7_machine_check(u64 vector, u64 la_ptr) +ev7_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr; char *saved_err_prefix = err_print_prefix; @@ -246,7 +246,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header) switch(header->type) { case EL_TYPE__PAL__LOGOUT_FRAME: - printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n", + printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n", err_print_prefix, packet->by_type.logout.whami, packet->by_type.logout.rbox_whami); diff --git a/arch/alpha/kernel/err_impl.h b/arch/alpha/kernel/err_impl.h index 3c12258158e6..0c010ca4611e 100644 --- a/arch/alpha/kernel/err_impl.h +++ b/arch/alpha/kernel/err_impl.h @@ -60,26 +60,26 @@ extern struct ev7_lf_subpackets * ev7_collect_logout_frame_subpackets(struct el_subpacket *, struct ev7_lf_subpackets *); extern void ev7_register_error_handlers(void); -extern void ev7_machine_check(u64, u64); +extern void ev7_machine_check(unsigned long, unsigned long); /* * err_ev6.c */ extern void ev6_register_error_handlers(void); extern int ev6_process_logout_frame(struct el_common *, int); -extern void ev6_machine_check(u64, u64); +extern void ev6_machine_check(unsigned long, unsigned long); /* * err_marvel.c */ -extern void marvel_machine_check(u64, u64); +extern void marvel_machine_check(unsigned long, unsigned long); extern void marvel_register_error_handlers(void); /* * err_titan.c */ extern int titan_process_logout_frame(struct el_common *, int); -extern void titan_machine_check(u64, u64); +extern void titan_machine_check(unsigned long, unsigned long); extern void titan_register_error_handlers(void); extern int privateer_process_logout_frame(struct el_common *, int); -extern void privateer_machine_check(u64, u64); +extern void privateer_machine_check(unsigned long, unsigned long); diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c index 6bfd243efba3..52a79dfc13c6 100644 --- a/arch/alpha/kernel/err_marvel.c +++ b/arch/alpha/kernel/err_marvel.c @@ -1042,7 +1042,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print) } void -marvel_machine_check(u64 vector, u64 la_ptr) +marvel_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr; int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL; diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c index c7e28a88d6e3..f7ed97ce0dfd 100644 --- a/arch/alpha/kernel/err_titan.c +++ b/arch/alpha/kernel/err_titan.c @@ -380,7 +380,7 @@ titan_process_logout_frame(struct el_common *mchk_header, int print) } void -titan_machine_check(u64 vector, u64 la_ptr) +titan_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; struct el_TITAN_sysdata_mcheck *tmchk = @@ -702,7 +702,7 @@ privateer_process_logout_frame(struct el_common *mchk_header, int print) } void -privateer_machine_check(u64 vector, u64 la_ptr) +privateer_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; struct el_TITAN_sysdata_mcheck *tmchk = diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h index 567f2598d090..3d2627ec9860 100644 --- a/arch/alpha/kernel/proto.h +++ b/arch/alpha/kernel/proto.h @@ -36,7 +36,6 @@ extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops irongate_pci_ops; extern int irongate_pci_clr_err(void); extern void irongate_init_arch(void); -extern void irongate_machine_check(u64, u64); #define irongate_pci_tbi ((void *)0) /* core_lca.c */ @@ -49,7 +48,7 @@ extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops marvel_pci_ops; extern void marvel_init_arch(void); extern void marvel_kill_arch(int); -extern void marvel_machine_check(u64, u64); +extern void marvel_machine_check(unsigned long, unsigned long); extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern int marvel_pa_to_nid(unsigned long); extern int marvel_cpuid_to_nid(int); @@ -86,7 +85,7 @@ extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops titan_pci_ops; extern void titan_init_arch(void); extern void titan_kill_arch(int); -extern void titan_machine_check(u64, u64); +extern void titan_machine_check(unsigned long, unsigned long); extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct _alpha_agp_info *titan_agp_info(void); diff --git a/arch/alpha/mm/extable.c b/arch/alpha/mm/extable.c index dc7aeda15773..62dc379d301a 100644 --- a/arch/alpha/mm/extable.c +++ b/arch/alpha/mm/extable.c @@ -3,11 +3,49 @@ */ #include <linux/module.h> +#include <linux/sort.h> #include <asm/uaccess.h> +static inline unsigned long ex_to_addr(const struct exception_table_entry *x) +{ + return (unsigned long)&x->insn + x->insn; +} + +static void swap_ex(void *a, void *b, int size) +{ + struct exception_table_entry *ex_a = a, *ex_b = b; + unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b); + unsigned int t = ex_a->fixup.unit; + + ex_a->fixup.unit = ex_b->fixup.unit; + ex_b->fixup.unit = t; + ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn); + ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn); +} + +/* + * The exception table needs to be sorted so that the binary + * search that we use to find entries in it works properly. + * This is used both for the kernel exception table and for + * the exception tables of modules that get loaded. + */ +static int cmp_ex(const void *a, const void *b) +{ + const struct exception_table_entry *x = a, *y = b; + + /* avoid overflow */ + if (ex_to_addr(x) > ex_to_addr(y)) + return 1; + if (ex_to_addr(x) < ex_to_addr(y)) + return -1; + return 0; +} + void sort_extable(struct exception_table_entry *start, struct exception_table_entry *finish) { + sort(start, finish - start, sizeof(struct exception_table_entry), + cmp_ex, swap_ex); } const struct exception_table_entry * @@ -20,7 +58,7 @@ search_extable(const struct exception_table_entry *first, unsigned long mid_value; mid = (last - first) / 2 + first; - mid_value = (unsigned long)&mid->insn + mid->insn; + mid_value = ex_to_addr(mid); if (mid_value == value) return mid; else if (mid_value < value) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e02b893fb909..e60ec54df334 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -454,6 +454,7 @@ config ARCH_MXC select ARCH_MTD_XIP select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK help Support for Freescale MXC/iMX-based family of processors @@ -486,8 +487,6 @@ config ARCH_PXA select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT @@ -585,6 +584,8 @@ config ARCH_DAVINCI select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select ZONE_DMA + select HAVE_IDE + select COMMON_CLKDEV help Support for TI's DaVinci platform. @@ -740,6 +741,56 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_411920 + bool "ARM errata: Invalidation of the Instruction Cache operation can fail" + depends on CPU_V6 && !SMP + help + Invalidation of the Instruction Cache operation can + fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. + It does not affect the MPCore. This option enables the ARM Ltd. + recommended workaround. + +config ARM_ERRATA_430973 + bool "ARM errata: Stale prediction on replaced interworking branch" + depends on CPU_V7 + help + This option enables the workaround for the 430973 Cortex-A8 + (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb + interworking branch is replaced with another code sequence at the + same virtual address, whether due to self-modifying code or virtual + to physical address re-mapping, Cortex-A8 does not recover from the + stale interworking branch prediction. This results in Cortex-A8 + executing the new code sequence in the incorrect ARM or Thumb state. + The workaround enables the BTB/BTAC operations by setting ACTLR.IBE + and also flushes the branch target cache at every context switch. + Note that setting specific bits in the ACTLR register may not be + available in non-secure mode. + +config ARM_ERRATA_458693 + bool "ARM errata: Processor deadlock when a false hazard is created" + depends on CPU_V7 + help + This option enables the workaround for the 458693 Cortex-A8 (r2p0) + erratum. For very specific sequences of memory operations, it is + possible for a hazard condition intended for a cache line to instead + be incorrectly associated with a different cache line. This false + hazard might then cause a processor deadlock. The workaround enables + the L1 caching of the NEON accesses and disables the PLD instruction + in the ACTLR register. Note that setting specific bits in the ACTLR + register may not be available in non-secure mode. + +config ARM_ERRATA_460075 + bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" + depends on CPU_V7 + help + This option enables the workaround for the 460075 Cortex-A8 (r2p0) + erratum. Any asynchronous access to the L2 cache may encounter a + situation in which recent store transactions to the L2 cache are lost + and overwritten with stale memory contents from external memory. The + workaround disables the write-allocate mode for the L2 cache via the + ACTLR register. Note that setting specific bits in the ACTLR register + may not be available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" @@ -1171,12 +1222,6 @@ config CPU_FREQ_IMX If in doubt, say N. -config CPU_FREQ_PXA - bool - depends on CPU_FREQ && ARCH_PXA && PXA25x - default y - select CPU_FREQ_DEFAULT_GOV_USERSPACE - endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig new file mode 100644 index 000000000000..eb2738b5be5f --- /dev/null +++ b/arch/arm/configs/davinci_all_defconfig @@ -0,0 +1,1784 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 15 08:16:53 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_DAVINCI=y +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI DaVinci Implementations +# + +# +# DaVinci Core Type +# +CONFIG_ARCH_DAVINCI_DM644x=y + +# +# DaVinci Board Type +# +CONFIG_MACH_DAVINCI_EVM=y +CONFIG_DAVINCI_MUX=y +CONFIG_DAVINCI_MUX_DEBUG=y +CONFIG_DAVINCI_MUX_WARNINGS=y +CONFIG_DAVINCI_RESET_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_LEDS=y +# CONFIG_LEDS_CPU is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_DAVINCI=m +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=m + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=m +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y +CONFIG_BLK_DEV_PALMCHIP_BK3710=m +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=y +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +CONFIG_LSI_ET1011C_PHY=y +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_XTKBD=m +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_DAVINCI=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +CONFIG_GPIO_PCF857X=m + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_DAVINCI_WATCHDOG=m + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_SOC=m +# CONFIG_SND_DAVINCI_SOC is not set +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=m +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=m +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SOC=y + +# +# DaVinci 35x and 644x USB support +# +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_PERIPHERAL=y +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_MUSB_PIO_ONLY=y +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index c367ae44012e..dcf8153a947d 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc5 -# Tue Mar 3 21:45:57 2009 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 11:58:57 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -89,6 +89,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -101,6 +102,7 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set @@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,6 +241,7 @@ CONFIG_AEABI=y CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -293,7 +300,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set -# CONFIG_NL80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=y # @@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -687,6 +696,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -724,8 +734,10 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y CONFIG_LIBERTAS=y # CONFIG_LIBERTAS_USB is not set CONFIG_LIBERTAS_SDIO=y +# CONFIG_LIBERTAS_SPI is not set # CONFIG_LIBERTAS_DEBUG is not set # CONFIG_LIBERTAS_THINFIRM is not set -# CONFIG_HERMES is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set @@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set # CONFIG_ATH5K is not set # CONFIG_ATH9K is not set +# CONFIG_AR9170_USB is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +# CONFIG_HERMES is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -1361,6 +1389,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1551,11 +1589,15 @@ CONFIG_TRACING=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1682,7 +1728,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index b0698722e0cb..398274b0771a 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -1,11 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Fri Jun 13 02:57:32 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:22:12 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y @@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -54,32 +62,35 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -87,10 +98,9 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -98,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -127,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -152,28 +159,23 @@ CONFIG_ARCH_MV78XX0=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Marvell MV78xx0 Implementations # CONFIG_MACH_DB78X00_BP=y CONFIG_MACH_RD78X00_MASA=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -199,6 +201,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_FEROCEON_L2=y +# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set # # Bus support @@ -208,6 +211,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -217,25 +222,33 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -248,6 +261,11 @@ CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -263,6 +281,8 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -271,10 +291,6 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -310,7 +326,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -325,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -334,26 +351,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -368,6 +382,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -376,6 +392,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -429,9 +446,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -456,6 +471,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -466,6 +482,11 @@ CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -486,10 +507,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -547,7 +578,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -566,6 +601,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -632,11 +669,15 @@ CONFIG_SATA_MV=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -644,7 +685,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -654,19 +714,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -676,18 +742,20 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -701,6 +769,9 @@ CONFIG_NETDEV_1000=y CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -709,7 +780,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -786,11 +860,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -799,44 +873,63 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -848,6 +941,7 @@ CONFIG_I2C_MV64XXX=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -855,14 +949,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -877,10 +974,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -900,20 +1002,28 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -944,10 +1054,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -958,9 +1064,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -978,6 +1111,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -986,12 +1122,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -999,20 +1138,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1028,7 +1167,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1041,7 +1179,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1049,7 +1187,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1059,14 +1196,29 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1074,7 +1226,12 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1105,6 +1262,8 @@ CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1114,18 +1273,25 @@ CONFIG_RTC_DRV_M41T80=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1134,14 +1300,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1151,6 +1328,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1174,15 +1356,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1202,25 +1382,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1301,11 +1483,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1320,22 +1507,55 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1347,17 +1567,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1393,6 +1623,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1422,25 +1656,32 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mx31moboard_defconfig b/arch/arm/configs/mx31moboard_defconfig deleted file mode 100644 index e90f86d6deef..000000000000 --- a/arch/arm/configs/mx31moboard_defconfig +++ /dev/null @@ -1,790 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc5 -# Fri Oct 24 11:41:22 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -# CONFIG_ARCH_MX2 is not set -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -# CONFIG_MACH_MX31ADS is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_MX31LITE is not set -CONFIG_MACH_MX31MOBOARD=y -# CONFIG_MXC_IRQ_PRIOR is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_GPIO_SYSFS is not set - -# -# I2C GPIO expanders: -# - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# -# CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_FRAME_POINTER=y -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 72a8201a5370..20ada526f6de 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y # CONFIG_CPU_32=y CONFIG_CPU_V6=y -CONFIG_CPU_32v6K=y +# CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y CONFIG_CPU_PABRT_NOIFAR=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 020e6a8a9e5c..5b98f7645119 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Fri Aug 22 12:38:51 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:07:25 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -44,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -55,48 +62,45 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set CONFIG_KRETPROBES=y -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -104,11 +108,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -124,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -134,10 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -158,14 +159,17 @@ CONFIG_CLASSIC_RCU=y CONFIG_ARCH_ORION5X=y # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Orion Implementations @@ -175,6 +179,7 @@ CONFIG_MACH_RD88F5182=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y CONFIG_MACH_TS209=y +CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_MINI=y CONFIG_MACH_TS409=y @@ -187,14 +192,6 @@ CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y CONFIG_MACH_RD88F5181L_FXO=y CONFIG_MACH_RD88F6183AP_GE=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -228,6 +225,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,25 +236,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y @@ -270,6 +276,11 @@ CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -285,13 +296,18 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -328,7 +344,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -343,6 +359,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +CONFIG_NET_DSA=y +CONFIG_NET_DSA_TAG_DSA=y +CONFIG_NET_DSA_TAG_EDSA=y +# CONFIG_NET_DSA_TAG_TRAILER is not set +CONFIG_NET_DSA_MV88E6XXX=y +# CONFIG_NET_DSA_MV88E6060 is not set +CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -352,27 +377,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +424,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -450,9 +478,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -477,6 +503,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -487,6 +514,11 @@ CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -507,11 +539,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -569,7 +610,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -589,6 +634,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -663,6 +709,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -670,7 +717,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -680,19 +746,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -702,10 +774,12 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -713,6 +787,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -727,6 +802,8 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -735,7 +812,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -819,11 +899,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -886,12 +966,9 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -911,14 +988,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -933,10 +1013,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -956,12 +1041,14 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -970,9 +1057,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -1013,9 +1103,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1030,10 +1147,13 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1042,12 +1162,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1055,20 +1178,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1076,7 +1199,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1097,6 +1219,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1104,7 +1227,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1114,8 +1236,18 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1124,7 +1256,10 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1132,7 +1267,12 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1164,6 +1304,7 @@ CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1173,12 +1314,15 @@ CONFIG_RTC_DRV_S35390A=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_M48T86=y +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1196,16 +1340,12 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set - -# -# Voltage and Current regulators -# +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1214,14 +1354,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1231,6 +1382,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1254,15 +1410,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1282,6 +1436,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1290,6 +1445,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1381,13 +1537,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1411,25 +1570,46 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1441,18 +1621,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_ASYNC_CORE=y CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1521,18 +1710,24 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1540,7 +1735,7 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 30f463d2fa8a..6ab5dd5868de 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_PXA=y # # Floating point emulation diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index d7da19bcf928..c207504de84d 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t; #define EF_ARM_HASENTRY 0x00000002 /* All */ #define EF_ARM_RELEXEC 0x00000001 /* All */ -#define R_ARM_NONE 0 -#define R_ARM_PC24 1 -#define R_ARM_ABS32 2 -#define R_ARM_CALL 28 -#define R_ARM_JUMP24 29 -#define R_ARM_V4BX 40 -#define R_ARM_PREL31 42 +#define R_ARM_NONE 0 +#define R_ARM_PC24 1 +#define R_ARM_ABS32 2 +#define R_ARM_CALL 28 +#define R_ARM_JUMP24 29 +#define R_ARM_V4BX 40 +#define R_ARM_PREL31 42 +#define R_ARM_MOVW_ABS_NC 43 +#define R_ARM_MOVT_ABS 44 /* * These are used to set parameters in the core dumps. diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index d1731e39b496..bac03c81489d 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, *(u32 *)loc = offset & 0x7fffffff; break; + case R_ARM_MOVW_ABS_NC: + case R_ARM_MOVT_ABS: + offset = *(u32 *)loc; + offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff); + offset = (offset ^ 0x8000) - 0x8000; + + offset += sym->st_value; + if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS) + offset >>= 16; + + *(u32 *)loc &= 0xfff0f000; + *(u32 *)loc |= ((offset & 0xf000) << 4) | + (offset & 0x0fff); + break; + default: printk(KERN_ERR "%s: unknown relocation: %u\n", module->name, ELF32_R_TYPE(rel->r_info)); diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index bac988e7a4c3..a9c78bc72b84 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,19 +4,56 @@ menu "TI DaVinci Implementations" comment "DaVinci Core Type" -config ARCH_DAVINCI644x - default y +config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" comment "DaVinci Board Type" config MACH_DAVINCI_EVM - bool "TI DaVinci EVM" + bool "TI DM644x EVM" default y - depends on ARCH_DAVINCI644x + depends on ARCH_DAVINCI_DM644x help Configure this option to specify the whether the board used - for development is a DaVinci EVM + for development is a DM644x EVM + + +config DAVINCI_MUX + bool "DAVINCI multiplexing support" + depends on ARCH_DAVINCI + default y + help + Pin multiplexing support for DAVINCI boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. + +config DAVINCI_MUX_DEBUG + bool "Multiplexing debug output" + depends on DAVINCI_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. + +config DAVINCI_MUX_WARNINGS + bool "Warn about pins the bootloader didn't set up" + depends on DAVINCI_MUX + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect DAVINCI_MUX for your product. + +config DAVINCI_RESET_CLOCKS + bool "Reset unused clocks during boot" + depends on ARCH_DAVINCI + help + Say Y if you want to reset unused clocks during boot. + This option saves power, but assumes all drivers are + using the clock framework. Broken drivers that do not + yet use clock framework may not work with this option. + If you are booting from another operating system, you + probably do not want this option enabled until your + device drivers work properly. endmenu diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 4dc458597f40..1674661942f3 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,12 @@ # Common objects obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o mux.o devices.o usb.o + gpio.o devices.o dma.o usb.o + +obj-$(CONFIG_DAVINCI_MUX) += mux.o + +# Chip specific +obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o # Board specific -obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o +obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 0b97a528902b..b2e7f9c63bc5 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -15,15 +15,20 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/memory.h> +#include <linux/etherdevice.h> #include <linux/i2c.h> #include <linux/i2c/pcf857x.h> #include <linux/i2c/at24.h> #include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/io.h> +#include <linux/phy.h> +#include <linux/clk.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -32,25 +37,34 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/hardware.h> +#include <mach/dm644x.h> #include <mach/common.h> #include <mach/i2c.h> +#include <mach/serial.h> +#include <mach/mux.h> +#include <mach/psc.h> +#include <mach/nand.h> -/* other misc. init functions */ -void __init davinci_psc_init(void); -void __init davinci_irq_init(void); -void __init davinci_map_common_io(void); -void __init davinci_init_common_hw(void); +#define DM644X_EVM_PHY_MASK (0x2) +#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) +#define DAVINCI_CFC_ATA_BASE 0x01C66000 + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 + +#define LXT971_PHY_ID (0x001378e2) +#define LXT971_PHY_MASK (0xfffffff0) static struct mtd_partition davinci_evm_norflash_partitions[] = { - /* bootloader (U-Boot, etc) in first 4 sectors */ + /* bootloader (UBL, U-Boot, etc) in first 5 sectors */ { .name = "bootloader", .offset = 0, - .size = 4 * SZ_64K, + .size = 5 * SZ_64K, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* bootloader params in the next 1 sectors */ @@ -100,10 +114,89 @@ static struct platform_device davinci_evm_norflash_device = { .resource = &davinci_evm_norflash_resource, }; -#endif +/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks). + * It may used instead of the (default) NOR chip to boot, using TI's + * tools to install the secondary boot loader (UBL) and U-Boot. + */ +struct mtd_partition davinci_evm_nandflash_partition[] = { + /* Bootloader layout depends on whose u-boot is installed, but we + * can hide all the details. + * - block 0 for u-boot environment ... in mainline u-boot + * - block 1 for UBL (plus up to four backup copies in blocks 2..5) + * - blocks 6...? for u-boot + * - blocks 16..23 for u-boot environment ... in TI's u-boot + */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_256K + SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* Kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, + /* File system (older GIT kernels started this on the 5MB mark) */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* A few blocks at end hold a flash BBT ... created by TI's CCS + * using flashwriter_nand.out, but ignored by TI's versions of + * Linux and u-boot. We boot faster by using them. + */ +}; -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +static struct davinci_nand_pdata davinci_evm_nandflash_data = { + .parts = davinci_evm_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), + .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_evm_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_evm_nandflash_device = { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &davinci_evm_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), + .resource = davinci_evm_nandflash_resource, +}; + +static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device davinci_fb_device = { + .name = "davincifb", + .id = -1, + .dev = { + .dma_mask = &davinci_fb_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = 0, +}; + +static struct platform_device rtc_dev = { + .name = "rtc_davinci_evm", + .id = -1, +}; static struct resource ide_resources[] = { { @@ -131,8 +224,6 @@ static struct platform_device ide_dev = { }, }; -#endif - /*----------------------------------------------------------------------*/ /* @@ -311,7 +402,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) gpio_request(gpio + 7, "nCF_SEL"); gpio_direction_output(gpio + 7, 1); - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + /* irlml6401 switches over 1A, in under 8 msec; + * now it can be managed by nDRV_VBUS ... + */ setup_usb(500, 8); return 0; @@ -343,14 +436,120 @@ static struct pcf857x_platform_data pcf_data_u35 = { * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) * - ... newer boards may have more */ +static struct memory_accessor *at24_mem_acc; + +static void at24_setup(struct memory_accessor *mem_acc, void *context) +{ + DECLARE_MAC_BUF(mac_str); + char mac_addr[6]; + + at24_mem_acc = mem_acc; + + /* Read MAC addr from EEPROM */ + if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) { + printk(KERN_INFO "Read MAC addr from EEPROM: %s\n", + print_mac(mac_str, mac_addr)); + } +} + static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, .flags = AT24_FLAG_ADDR16, + .setup = at24_setup, }; +int dm6446evm_eeprom_read(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->read(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_read); + +int dm6446evm_eeprom_write(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->write(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_write); + +/* + * MSP430 supports RTC, card detection, input from IR remote, and + * a bit more. It triggers interrupts on GPIO(7) from pressing + * buttons on the IR remote, and for card detect switches. + */ +static struct i2c_client *dm6446evm_msp; + +static int dm6446evm_msp_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + dm6446evm_msp = client; + return 0; +} + +static int dm6446evm_msp_remove(struct i2c_client *client) +{ + dm6446evm_msp = NULL; + return 0; +} + +static const struct i2c_device_id dm6446evm_msp_ids[] = { + { "dm6446evm_msp", 0, }, + { /* end of list */ }, +}; + +static struct i2c_driver dm6446evm_msp_driver = { + .driver.name = "dm6446evm_msp", + .id_table = dm6446evm_msp_ids, + .probe = dm6446evm_msp_probe, + .remove = dm6446evm_msp_remove, +}; + +static int dm6444evm_msp430_get_pins(void) +{ + static const char txbuf[2] = { 2, 4, }; + char buf[4]; + struct i2c_msg msg[2] = { + { + .addr = dm6446evm_msp->addr, + .flags = 0, + .len = 2, + .buf = (void __force *)txbuf, + }, + { + .addr = dm6446evm_msp->addr, + .flags = I2C_M_RD, + .len = 4, + .buf = buf, + }, + }; + int status; + + if (!dm6446evm_msp) + return -ENXIO; + + /* Command 4 == get input state, returns port 2 and port3 data + * S Addr W [A] len=2 [A] cmd=4 [A] + * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P + */ + status = i2c_transfer(dm6446evm_msp->adapter, msg, 2); + if (status < 0) + return status; + + dev_dbg(&dm6446evm_msp->dev, + "PINS: %02x %02x %02x %02x\n", + buf[0], buf[1], buf[2], buf[3]); + + return (buf[3] << 8) | buf[2]; +} + static struct i2c_board_info __initdata i2c_info[] = { { + I2C_BOARD_INFO("dm6446evm_msp", 0x23), + }, + { I2C_BOARD_INFO("pcf8574", 0x38), .platform_data = &pcf_data_u2, }, @@ -368,7 +567,6 @@ static struct i2c_board_info __initdata i2c_info[] = { }, /* ALSO: * - tvl320aic33 audio codec (0x1b) - * - msp430 microcontroller (0x23) * - tvp5146 video decoder (0x5d) */ }; @@ -384,51 +582,109 @@ static struct davinci_i2c_platform_data i2c_pdata = { static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); + i2c_add_driver(&dm6446evm_msp_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } static struct platform_device *davinci_evm_devices[] __initdata = { -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - &davinci_evm_norflash_device, -#endif -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - &ide_dev, -#endif + &davinci_fb_device, + &rtc_dev, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), }; static void __init davinci_evm_map_io(void) { davinci_map_common_io(); + dm644x_init(); } -static __init void davinci_evm_init(void) +static int davinci_phy_fixup(struct phy_device *phydev) { - davinci_psc_init(); + unsigned int control; + /* CRITICAL: Fix for increasing PHY signal drive strength for + * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY + * signal strength was low causing TX to fail randomly. The + * fix is to Set bit 11 (Increased MII drive strength) of PHY + * register 26 (Digital Config register) on this phy. */ + control = phy_read(phydev, 26); + phy_write(phydev, 26, (control | 0x800)); + return 0; +} #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#define HAS_ATA 1 +#else +#define HAS_ATA 0 +#endif + #if defined(CONFIG_MTD_PHYSMAP) || \ defined(CONFIG_MTD_PHYSMAP_MODULE) - printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " - "but share pins.\n\t Disable IDE for NOR support.\n"); +#define HAS_NOR 1 +#else +#define HAS_NOR 0 #endif + +#if defined(CONFIG_MTD_NAND_DAVINCI) || \ + defined(CONFIG_MTD_NAND_DAVINCI_MODULE) +#define HAS_NAND 1 +#else +#define HAS_NAND 0 #endif +static __init void davinci_evm_init(void) +{ + struct clk *aemif_clk; + + aemif_clk = clk_get(NULL, "aemif"); + clk_enable(aemif_clk); + + if (HAS_ATA) { + if (HAS_NAND || HAS_NOR) + pr_warning("WARNING: both IDE and Flash are " + "enabled, but they share AEMIF pins.\n" + "\tDisable IDE for NAND/NOR support.\n"); + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN); + davinci_cfg_reg(DM644X_HDIREN); + platform_device_register(&ide_dev); + } else if (HAS_NAND || HAS_NOR) { + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN_DISABLE); + + /* only one device will be jumpered and detected */ + if (HAS_NAND) { + platform_device_register(&davinci_evm_nandflash_device); + evm_leds[7].default_trigger = "nand-disk"; + if (HAS_NOR) + pr_warning("WARNING: both NAND and NOR flash " + "are enabled; disable one of them.\n"); + } else if (HAS_NOR) + platform_device_register(&davinci_evm_norflash_device); + } + platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); + + davinci_serial_init(&uart_config); + + /* Register the fixup for PHY on DaVinci */ + phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, + davinci_phy_fixup); + } static __init void davinci_evm_irq_init(void) { - davinci_init_common_hw(); davinci_irq_init(); } -MACHINE_START(DAVINCI_EVM, "DaVinci EVM") +MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") /* Maintainer: MontaVista Software <source@mvista.com> */ .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index abb92b7eca0c..f0baaa15a57e 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -1,7 +1,8 @@ /* - * TI DaVinci clock config file + * Clock and PLL control for DaVinci devices * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/errno.h> +#include <linux/clk.h> #include <linux/err.h> #include <linux/mutex.h> #include <linux/platform_device.h> @@ -21,98 +23,50 @@ #include <mach/hardware.h> #include <mach/psc.h> +#include <mach/cputype.h> #include "clock.h" -/* PLL/Reset register offsets */ -#define PLLM 0x110 - static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clockfw_lock); -static unsigned int commonrate; -static unsigned int armrate; -static unsigned int fixedrate = 27000000; /* 27 MHZ */ - -extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable); - -/* - * Returns a clock. Note that we first try to use device id on the bus - * and clock name. If this fails, we try to use clock name only. - */ -struct clk *clk_get(struct device *dev, const char *id) +static unsigned psc_domain(struct clk *clk) { - struct clk *p, *clk = ERR_PTR(-ENOENT); - int idno; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - goto found; - } - } - - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - break; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; + return (clk->flags & PSC_DSP) + ? DAVINCI_GPSC_DSPDOMAIN + : DAVINCI_GPSC_ARMDOMAIN; } -EXPORT_SYMBOL(clk_get); -void clk_put(struct clk *clk) +static void __clk_enable(struct clk *clk) { - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); - -static int __clk_enable(struct clk *clk) -{ - if (clk->flags & ALWAYS_ENABLED) - return 0; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1); - return 0; + if (clk->parent) + __clk_enable(clk->parent); + if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 1); } static void __clk_disable(struct clk *clk) { - if (clk->usecount) + if (WARN_ON(clk->usecount == 0)) return; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0); + if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 0); + if (clk->parent) + __clk_disable(clk->parent); } int clk_enable(struct clk *clk) { unsigned long flags; - int ret = 0; if (clk == NULL || IS_ERR(clk)) return -EINVAL; - if (clk->usecount++ == 0) { - spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); - return ret; + return 0; } EXPORT_SYMBOL(clk_enable); @@ -123,11 +77,9 @@ void clk_disable(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return; - if (clk->usecount > 0 && !(--clk->usecount)) { - spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -136,7 +88,7 @@ unsigned long clk_get_rate(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_get_rate); @@ -145,7 +97,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_round_rate); @@ -164,10 +116,23 @@ int clk_register(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; + if (WARN(clk->parent && !clk->parent->rate, + "CLK: %s parent %s has no rate!\n", + clk->name, clk->parent->name)) + return -EINVAL; + mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); + list_add_tail(&clk->node, &clocks); mutex_unlock(&clocks_mutex); + /* If rate is already set, use it */ + if (clk->rate) + return 0; + + /* Otherwise, default to parent rate */ + if (clk->parent) + clk->rate = clk->parent->rate; + return 0; } EXPORT_SYMBOL(clk_register); @@ -183,84 +148,150 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); -static struct clk davinci_clks[] = { - { - .name = "ARMCLK", - .rate = &armrate, - .lpsc = -1, - .flags = ALWAYS_ENABLED, - }, - { - .name = "UART", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_UART0, - }, - { - .name = "EMACCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, - }, - { - .name = "I2CCLK", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_I2C, - }, - { - .name = "IDECLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_ATA, - }, - { - .name = "McBSPCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_McBSP, - }, - { - .name = "MMCSDCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_MMC_SD, - }, - { - .name = "SPICLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_SPI, - }, - { - .name = "gpio", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_GPIO, - }, - { - .name = "usb", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_USB, - }, - { - .name = "AEMIFCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_AEMIF, - .usecount = 1, +#ifdef CONFIG_DAVINCI_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + + spin_lock_irq(&clockfw_lock); + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0) + continue; + if (!(ck->flags & CLK_PSC)) + continue; + + /* ignore if in Disabled or SwRstDisable states */ + if (!davinci_psc_is_clk_active(ck->lpsc)) + continue; + + pr_info("Clocks: disable unused %s\n", ck->name); + davinci_psc_config(psc_domain(ck), ck->lpsc, 0); } -}; + spin_unlock_irq(&clockfw_lock); + + return 0; +} +late_initcall(clk_disable_unused); +#endif -int __init davinci_clk_init(void) +static void clk_sysclk_recalc(struct clk *clk) { - struct clk *clkp; - int count = 0; - u32 pll_mult; - - pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM); - commonrate = ((pll_mult + 1) * 27000000) / 6; - armrate = ((pll_mult + 1) * 27000000) / 2; - - for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks); - count++, clkp++) { - clk_register(clkp); - - /* Turn on clocks that have been enabled in the - * table above */ - if (clkp->usecount) - clk_enable(clkp); + u32 v, plldiv; + struct pll_data *pll; + + /* If this is the PLL base clock, no more calculations needed */ + if (clk->pll_data) + return; + + if (WARN_ON(!clk->parent)) + return; + + clk->rate = clk->parent->rate; + + /* Otherwise, the parent must be a PLL */ + if (WARN_ON(!clk->parent->pll_data)) + return; + + pll = clk->parent->pll_data; + + /* If pre-PLL, source clock is before the multiplier and divider(s) */ + if (clk->flags & PRE_PLL) + clk->rate = pll->input_rate; + + if (!clk->div_reg) + return; + + v = __raw_readl(pll->base + clk->div_reg); + if (v & PLLDIV_EN) { + plldiv = (v & PLLDIV_RATIO_MASK) + 1; + if (plldiv) + clk->rate /= plldiv; + } +} + +static void __init clk_pll_init(struct clk *clk) +{ + u32 ctrl, mult = 1, prediv = 1, postdiv = 1; + u8 bypass; + struct pll_data *pll = clk->pll_data; + + pll->base = IO_ADDRESS(pll->phys_base); + ctrl = __raw_readl(pll->base + PLLCTL); + clk->rate = pll->input_rate = clk->parent->rate; + + if (ctrl & PLLCTL_PLLEN) { + bypass = 0; + mult = __raw_readl(pll->base + PLLM); + mult = (mult & PLLM_PLLM_MASK) + 1; + } else + bypass = 1; + + if (pll->flags & PLL_HAS_PREDIV) { + prediv = __raw_readl(pll->base + PREDIV); + if (prediv & PLLDIV_EN) + prediv = (prediv & PLLDIV_RATIO_MASK) + 1; + else + prediv = 1; + } + + /* pre-divider is fixed, but (some?) chips won't report that */ + if (cpu_is_davinci_dm355() && pll->num == 1) + prediv = 8; + + if (pll->flags & PLL_HAS_POSTDIV) { + postdiv = __raw_readl(pll->base + POSTDIV); + if (postdiv & PLLDIV_EN) + postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1; + else + postdiv = 1; + } + + if (!bypass) { + clk->rate /= prediv; + clk->rate *= mult; + clk->rate /= postdiv; + } + + pr_debug("PLL%d: input = %lu MHz [ ", + pll->num, clk->parent->rate / 1000000); + if (bypass) + pr_debug("bypass "); + if (prediv > 1) + pr_debug("/ %d ", prediv); + if (mult > 1) + pr_debug("* %d ", mult); + if (postdiv > 1) + pr_debug("/ %d ", postdiv); + pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000); +} + +int __init davinci_clk_init(struct davinci_clk *clocks) + { + struct davinci_clk *c; + struct clk *clk; + + for (c = clocks; c->lk.clk; c++) { + clk = c->lk.clk; + + if (clk->pll_data) + clk_pll_init(clk); + + /* Calculate rates for PLL-derived clocks */ + else if (clk->flags & CLK_PLL) + clk_sysclk_recalc(clk); + + if (clk->lpsc) + clk->flags |= CLK_PSC; + + clkdev_add(&c->lk); + clk_register(clk); + + /* Turn on clocks that Linux doesn't otherwise manage */ + if (clk->flags & ALWAYS_ENABLED) + clk_enable(clk); } return 0; @@ -285,12 +316,52 @@ static void davinci_ck_stop(struct seq_file *m, void *v) { } -static int davinci_ck_show(struct seq_file *m, void *v) +#define CLKNAME_MAX 10 /* longest clock name */ +#define NEST_DELTA 2 +#define NEST_MAX 4 + +static void +dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) { - struct clk *cp; + char *state; + char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX]; + struct clk *clk; + unsigned i; + + if (parent->flags & CLK_PLL) + state = "pll"; + else if (parent->flags & CLK_PSC) + state = "psc"; + else + state = ""; + + /* <nest spaces> name <pad to end> */ + memset(buf, ' ', sizeof(buf) - 1); + buf[sizeof(buf) - 1] = 0; + i = strlen(parent->name); + memcpy(buf + nest, parent->name, + min(i, (unsigned)(sizeof(buf) - 1 - nest))); + + seq_printf(s, "%s users=%2d %-3s %9ld Hz\n", + buf, parent->usecount, state, clk_get_rate(parent)); + /* REVISIT show device associations too */ + + /* cost is now small, but not linear... */ + list_for_each_entry(clk, &clocks, node) { + if (clk->parent == parent) + dump_clock(s, nest + NEST_DELTA, clk); + } +} - list_for_each_entry(cp, &clocks, node) - seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount); +static int davinci_ck_show(struct seq_file *m, void *v) +{ + /* Show clock tree; we know the main oscillator is first. + * We trust nonzero usecounts equate to PSC enables... + */ + mutex_lock(&clocks_mutex); + if (!list_empty(&clocks)) + dump_clock(m, 0, list_first_entry(&clocks, struct clk, node)); + mutex_unlock(&clocks_mutex); return 0; } @@ -321,4 +392,4 @@ static int __init davinci_ck_proc_init(void) } __initcall(davinci_ck_proc_init); -#endif /* CONFIG_DEBUG_PROC_FS */ +#endif /* CONFIG_DEBUG_PROC_FS */ diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index ed47079a52e4..35736ec202f8 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -1,7 +1,8 @@ /* * TI DaVinci clock definitions * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,23 +12,85 @@ #ifndef __ARCH_ARM_DAVINCI_CLOCK_H #define __ARCH_ARM_DAVINCI_CLOCK_H +#include <linux/list.h> +#include <asm/clkdev.h> + +#define DAVINCI_PLL1_BASE 0x01c40800 +#define DAVINCI_PLL2_BASE 0x01c40c00 +#define MAX_PLL 2 + +/* PLL/Reset register offsets */ +#define PLLCTL 0x100 +#define PLLCTL_PLLEN BIT(0) +#define PLLCTL_CLKMODE BIT(8) + +#define PLLM 0x110 +#define PLLM_PLLM_MASK 0xff + +#define PREDIV 0x114 +#define PLLDIV1 0x118 +#define PLLDIV2 0x11c +#define PLLDIV3 0x120 +#define POSTDIV 0x128 +#define BPDIV 0x12c +#define PLLCMD 0x138 +#define PLLSTAT 0x13c +#define PLLALNCTL 0x140 +#define PLLDCHANGE 0x144 +#define PLLCKEN 0x148 +#define PLLCKSTAT 0x14c +#define PLLSYSTAT 0x150 +#define PLLDIV4 0x160 +#define PLLDIV5 0x164 +#define PLLDIV6 0x168 +#define PLLDIV7 0x16c +#define PLLDIV8 0x170 +#define PLLDIV9 0x174 +#define PLLDIV_EN BIT(15) +#define PLLDIV_RATIO_MASK 0x1f + +struct pll_data { + u32 phys_base; + void __iomem *base; + u32 num; + u32 flags; + u32 input_rate; +}; +#define PLL_HAS_PREDIV 0x01 +#define PLL_HAS_POSTDIV 0x02 + struct clk { struct list_head node; struct module *owner; const char *name; - unsigned int *rate; - int id; - __s8 usecount; - __u8 flags; - __u8 lpsc; + unsigned long rate; + u8 usecount; + u8 flags; + u8 lpsc; + struct clk *parent; + struct pll_data *pll_data; + u32 div_reg; }; /* Clock flags */ -#define RATE_CKCTL 1 -#define RATE_FIXED 2 -#define RATE_PROPAGATES 4 -#define VIRTUAL_CLOCK 8 -#define ALWAYS_ENABLED 16 -#define ENABLE_REG_32BIT 32 +#define ALWAYS_ENABLED BIT(1) +#define CLK_PSC BIT(2) +#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ +#define CLK_PLL BIT(4) /* PLL-derived clock */ +#define PRE_PLL BIT(5) /* source is before PLL mult/div */ + +struct davinci_clk { + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck) \ + { \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } +int davinci_clk_init(struct davinci_clk *clocks); #endif diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 808633f9f03c..a31370b93dd2 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -21,6 +21,10 @@ #include <mach/hardware.h> #include <mach/i2c.h> #include <mach/irqs.h> +#include <mach/cputype.h> +#include <mach/mux.h> + +#define DAVINCI_I2C_BASE 0x01C21000 static struct resource i2c_resources[] = { { @@ -43,6 +47,9 @@ static struct platform_device davinci_i2c_device = { void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) { + if (cpu_is_davinci_dm644x()) + davinci_cfg_reg(DM644X_I2C); + davinci_i2c_device.dev.platform_data = pdata; (void) platform_device_register(&davinci_i2c_device); } diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c new file mode 100644 index 000000000000..d428ef192eac --- /dev/null +++ b/arch/arm/mach-davinci/dm644x.c @@ -0,0 +1,461 @@ +/* + * TI DaVinci DM644x chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +#include <mach/dm644x.h> +#include <mach/clock.h> +#include <mach/cputype.h> +#include <mach/edma.h> +#include <mach/irqs.h> +#include <mach/psc.h> +#include <mach/mux.h> + +#include "clock.h" +#include "mux.h" + +/* + * Device specific clocks + */ +#define DM644X_REF_FREQ 27000000 + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DM644X_REF_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .pll_data = &pll1_data, + .flags = CLK_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk pll2_clk = { + .name = "pll2", + .parent = &ref_clk, + .pll_data = &pll2_data, + .flags = CLK_PLL, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll2_sysclk2 = { + .name = "pll2_sysclk2", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll2_sysclkbp = { + .name = "pll2_sysclkbp", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk dsp_clk = { + .name = "dsp", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_GEM, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk vicp_clk = { + .name = "vicp", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_IMCOP, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk vpss_master_clk = { + .name = "vpss_master", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSMSTR, + .flags = CLK_PSC, +}; + +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART2, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, +}; + +static struct clk i2c_clk = { + .name = "i2c", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_I2C, +}; + +static struct clk ide_clk = { + .name = "ide", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_ATA, +}; + +static struct clk asp_clk = { + .name = "asp0", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_McBSP, +}; + +static struct clk mmcsd_clk = { + .name = "mmcsd", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_MMC_SD, +}; + +static struct clk spi_clk = { + .name = "spi", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_SPI, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_GPIO, +}; + +static struct clk usb_clk = { + .name = "usb", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_USB, +}; + +static struct clk vlynq_clk = { + .name = "vlynq", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_VLYNQ, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_AEMIF, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM0, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM2, +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER2, + .usecount = 1, /* REVISIT: why cant' this be disabled? */ +}; + +struct davinci_clk dm644x_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "pll2_sysclk2", &pll2_sysclk2), + CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), + CLK(NULL, "dsp", &dsp_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "vicp", &vicp_clk), + CLK(NULL, "vpss_master", &vpss_master_clk), + CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK("palm_bk3710", NULL, &ide_clk), + CLK("soc-audio.0", NULL, &asp_clk), + CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK(NULL, "spi", &spi_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "usb", &usb_clk), + CLK(NULL, "vlynq", &vlynq_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, NULL, NULL), +}; + +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) + +static struct resource dm644x_emac_resources[] = { + { + .start = DM644X_EMAC_BASE, + .end = DM644X_EMAC_BASE + 0x47ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EMACINT, + .end = IRQ_EMACINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm644x_emac_device = { + .name = "davinci_emac", + .id = 1, + .num_resources = ARRAY_SIZE(dm644x_emac_resources), + .resource = dm644x_emac_resources, +}; + +#endif + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm644x_pins[] = { +MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true) +MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true) +MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) + +MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true) + +MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true) + +MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false) + +MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false) + +MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false) + +MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true) +MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true) + +MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false) + +MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false) + +MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false) + +MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false) +MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false) +MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false) + +MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true) + +MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true) + +MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true) +MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false) +MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false) +MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true) + +MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true) + +MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true) +MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) +}; + + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm644x_no_event[] = { + 0, 1, 12, 13, 14, + 15, 25, 30, 31, 45, + 46, 47, 55, 56, 57, + 58, 59, 60, 61, 62, + 63, + -1 +}; + +static struct edma_soc_info dm644x_edma_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .noevent = dma_chan_dm644x_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using TC*_ERR */ +}; + +static struct platform_device dm644x_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm644x_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ +void __init dm644x_init(void) +{ + davinci_clk_init(dm644x_clks); + davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins)); +} + +static int __init dm644x_init_devices(void) +{ + if (!cpu_is_davinci_dm644x()) + return 0; + + platform_device_register(&dm644x_edma_device); + return 0; +} +postcore_initcall(dm644x_init_devices); diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c new file mode 100644 index 000000000000..15e9eb158bb7 --- /dev/null +++ b/arch/arm/mach-davinci/dma.c @@ -0,0 +1,1135 @@ +/* + * EDMA3 support for DaVinci + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/compiler.h> +#include <linux/io.h> + +#include <mach/cputype.h> +#include <mach/memory.h> +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/edma.h> +#include <mach/mux.h> + + +/* Offsets matching "struct edmacc_param" */ +#define PARM_OPT 0x00 +#define PARM_SRC 0x04 +#define PARM_A_B_CNT 0x08 +#define PARM_DST 0x0c +#define PARM_SRC_DST_BIDX 0x10 +#define PARM_LINK_BCNTRLD 0x14 +#define PARM_SRC_DST_CIDX 0x18 +#define PARM_CCNT 0x1c + +#define PARM_SIZE 0x20 + +/* Offsets for EDMA CC global channel registers and their shadows */ +#define SH_ER 0x00 /* 64 bits */ +#define SH_ECR 0x08 /* 64 bits */ +#define SH_ESR 0x10 /* 64 bits */ +#define SH_CER 0x18 /* 64 bits */ +#define SH_EER 0x20 /* 64 bits */ +#define SH_EECR 0x28 /* 64 bits */ +#define SH_EESR 0x30 /* 64 bits */ +#define SH_SER 0x38 /* 64 bits */ +#define SH_SECR 0x40 /* 64 bits */ +#define SH_IER 0x50 /* 64 bits */ +#define SH_IECR 0x58 /* 64 bits */ +#define SH_IESR 0x60 /* 64 bits */ +#define SH_IPR 0x68 /* 64 bits */ +#define SH_ICR 0x70 /* 64 bits */ +#define SH_IEVAL 0x78 +#define SH_QER 0x80 +#define SH_QEER 0x84 +#define SH_QEECR 0x88 +#define SH_QEESR 0x8c +#define SH_QSER 0x90 +#define SH_QSECR 0x94 +#define SH_SIZE 0x200 + +/* Offsets for EDMA CC global registers */ +#define EDMA_REV 0x0000 +#define EDMA_CCCFG 0x0004 +#define EDMA_QCHMAP 0x0200 /* 8 registers */ +#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */ +#define EDMA_QDMAQNUM 0x0260 +#define EDMA_QUETCMAP 0x0280 +#define EDMA_QUEPRI 0x0284 +#define EDMA_EMR 0x0300 /* 64 bits */ +#define EDMA_EMCR 0x0308 /* 64 bits */ +#define EDMA_QEMR 0x0310 +#define EDMA_QEMCR 0x0314 +#define EDMA_CCERR 0x0318 +#define EDMA_CCERRCLR 0x031c +#define EDMA_EEVAL 0x0320 +#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/ +#define EDMA_QRAE 0x0380 /* 4 registers */ +#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */ +#define EDMA_QSTAT 0x0600 /* 2 registers */ +#define EDMA_QWMTHRA 0x0620 +#define EDMA_QWMTHRB 0x0624 +#define EDMA_CCSTAT 0x0640 + +#define EDMA_M 0x1000 /* global channel registers */ +#define EDMA_ECR 0x1008 +#define EDMA_ECRH 0x100C +#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */ +#define EDMA_PARM 0x4000 /* 128 param entries */ + +#define DAVINCI_DMA_3PCC_BASE 0x01C00000 + +#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) + +#define EDMA_MAX_DMACH 64 +#define EDMA_MAX_PARAMENTRY 512 +#define EDMA_MAX_EVQUE 2 /* FIXME too small */ + + +/*****************************************************************************/ + +static void __iomem *edmacc_regs_base; + +static inline unsigned int edma_read(int offset) +{ + return (unsigned int)__raw_readl(edmacc_regs_base + offset); +} + +static inline void edma_write(int offset, int val) +{ + __raw_writel(val, edmacc_regs_base + offset); +} +static inline void edma_modify(int offset, unsigned and, unsigned or) +{ + unsigned val = edma_read(offset); + val &= and; + val |= or; + edma_write(offset, val); +} +static inline void edma_and(int offset, unsigned and) +{ + unsigned val = edma_read(offset); + val &= and; + edma_write(offset, val); +} +static inline void edma_or(int offset, unsigned or) +{ + unsigned val = edma_read(offset); + val |= or; + edma_write(offset, val); +} +static inline unsigned int edma_read_array(int offset, int i) +{ + return edma_read(offset + (i << 2)); +} +static inline void edma_write_array(int offset, int i, unsigned val) +{ + edma_write(offset + (i << 2), val); +} +static inline void edma_modify_array(int offset, int i, + unsigned and, unsigned or) +{ + edma_modify(offset + (i << 2), and, or); +} +static inline void edma_or_array(int offset, int i, unsigned or) +{ + edma_or(offset + (i << 2), or); +} +static inline void edma_or_array2(int offset, int i, int j, unsigned or) +{ + edma_or(offset + ((i*2 + j) << 2), or); +} +static inline void edma_write_array2(int offset, int i, int j, unsigned val) +{ + edma_write(offset + ((i*2 + j) << 2), val); +} +static inline unsigned int edma_shadow0_read(int offset) +{ + return edma_read(EDMA_SHADOW0 + offset); +} +static inline unsigned int edma_shadow0_read_array(int offset, int i) +{ + return edma_read(EDMA_SHADOW0 + offset + (i << 2)); +} +static inline void edma_shadow0_write(int offset, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset, val); +} +static inline void edma_shadow0_write_array(int offset, int i, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset + (i << 2), val); +} +static inline unsigned int edma_parm_read(int offset, int param_no) +{ + return edma_read(EDMA_PARM + offset + (param_no << 5)); +} +static inline void edma_parm_write(int offset, int param_no, unsigned val) +{ + edma_write(EDMA_PARM + offset + (param_no << 5), val); +} +static inline void edma_parm_modify(int offset, int param_no, + unsigned and, unsigned or) +{ + edma_modify(EDMA_PARM + offset + (param_no << 5), and, or); +} +static inline void edma_parm_and(int offset, int param_no, unsigned and) +{ + edma_and(EDMA_PARM + offset + (param_no << 5), and); +} +static inline void edma_parm_or(int offset, int param_no, unsigned or) +{ + edma_or(EDMA_PARM + offset + (param_no << 5), or); +} + +/*****************************************************************************/ + +/* actual number of DMA channels and slots on this silicon */ +static unsigned num_channels; +static unsigned num_slots; + +static struct dma_interrupt_data { + void (*callback)(unsigned channel, unsigned short ch_status, + void *data); + void *data; +} intr_data[EDMA_MAX_DMACH]; + +/* The edma_inuse bit for each PaRAM slot is clear unless the + * channel is in use ... by ARM or DSP, for QDMA, or whatever. + */ +static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY); + +/* The edma_noevent bit for each channel is clear unless + * it doesn't trigger DMA events on this platform. It uses a + * bit of SOC-specific initialization code. + */ +static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH); + +/* dummy param set used to (re)initialize parameter RAM slots */ +static const struct edmacc_param dummy_paramset = { + .link_bcntrld = 0xffff, + .ccnt = 1, +}; + +static const int __initconst +queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = { +/* {event queue no, TC no} */ + {0, 0}, + {1, 1}, + {-1, -1} +}; + +static const int __initconst +queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = { + /* {event queue no, Priority} */ + {0, 3}, + {1, 7}, + {-1, -1} +}; + +/*****************************************************************************/ + +static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no) +{ + int bit = (ch_no & 0x7) * 4; + + /* default to low priority queue */ + if (queue_no == EVENTQ_DEFAULT) + queue_no = EVENTQ_1; + + queue_no &= 7; + edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3), + ~(0x7 << bit), queue_no << bit); +} + +static void __init map_queue_tc(int queue_no, int tc_no) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit)); +} + +static void __init assign_priority_to_queue(int queue_no, int priority) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit)); +} + +static inline void +setup_dma_interrupt(unsigned lch, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data) +{ + if (!callback) { + edma_shadow0_write_array(SH_IECR, lch >> 5, + (1 << (lch & 0x1f))); + } + + intr_data[lch].callback = callback; + intr_data[lch].data = data; + + if (callback) { + edma_shadow0_write_array(SH_ICR, lch >> 5, + (1 << (lch & 0x1f))); + edma_shadow0_write_array(SH_IESR, lch >> 5, + (1 << (lch & 0x1f))); + } +} + +/****************************************************************************** + * + * DMA interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_irq_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_irq_handler\n"); + + if ((edma_shadow0_read_array(SH_IPR, 0) == 0) + && (edma_shadow0_read_array(SH_IPR, 1) == 0)) + return IRQ_NONE; + + while (1) { + int j; + if (edma_shadow0_read_array(SH_IPR, 0)) + j = 0; + else if (edma_shadow0_read_array(SH_IPR, 1)) + j = 1; + else + break; + dev_dbg(data, "IPR%d %08x\n", j, + edma_shadow0_read_array(SH_IPR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_shadow0_write_array(SH_ICR, j, (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, DMA_COMPLETE, + intr_data[k].data); + } + } + } + cnt++; + if (cnt > 10) + break; + } + edma_shadow0_write(SH_IEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * DMA error interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_ccerr_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_ccerr_handler\n"); + + if ((edma_read_array(EDMA_EMR, 0) == 0) && + (edma_read_array(EDMA_EMR, 1) == 0) && + (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0)) + return IRQ_NONE; + + while (1) { + int j = -1; + if (edma_read_array(EDMA_EMR, 0)) + j = 0; + else if (edma_read_array(EDMA_EMR, 1)) + j = 1; + if (j >= 0) { + dev_dbg(data, "EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_read_array(EDMA_EMR, j) & (1 << i)) { + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, 1 << i); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, + (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, + DMA_CC_ERROR, + intr_data + [k].data); + } + } + } + } else if (edma_read(EDMA_QEMR)) { + dev_dbg(data, "QEMR %02x\n", + edma_read(EDMA_QEMR)); + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_QEMR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_QEMCR, 1 << i); + edma_shadow0_write(SH_QSECR, (1 << i)); + + /* NOTE: not reported!! */ + } + } + } else if (edma_read(EDMA_CCERR)) { + dev_dbg(data, "CCERR %08x\n", + edma_read(EDMA_CCERR)); + /* FIXME: CCERR.BIT(16) ignored! much better + * to just write CCERRCLR with CCERR value... + */ + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_CCERR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_CCERRCLR, 1 << i); + + /* NOTE: not reported!! */ + } + } + } + if ((edma_read_array(EDMA_EMR, 0) == 0) + && (edma_read_array(EDMA_EMR, 1) == 0) + && (edma_read(EDMA_QEMR) == 0) + && (edma_read(EDMA_CCERR) == 0)) { + break; + } + cnt++; + if (cnt > 10) + break; + } + edma_write(EDMA_EEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * Transfer controller error interrupt handlers + * + *****************************************************************************/ + +#define tc_errs_handled false /* disabled as long as they're NOPs */ + +static irqreturn_t dma_tc0err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc0err_handler\n"); + return IRQ_HANDLED; +} + +static irqreturn_t dma_tc1err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc1err_handler\n"); + return IRQ_HANDLED; +} + +/*-----------------------------------------------------------------------*/ + +/* Resource alloc/free: dma channels, parameter RAM slots */ + +/** + * edma_alloc_channel - allocate DMA channel and paired parameter RAM + * @channel: specific channel to allocate; negative for "any unmapped channel" + * @callback: optional; to be issued on DMA completion or errors + * @data: passed to callback + * @eventq_no: an EVENTQ_* constant, used to choose which Transfer + * Controller (TC) executes requests using this channel. Use + * EVENTQ_DEFAULT unless you really need a high priority queue. + * + * This allocates a DMA channel and its associated parameter RAM slot. + * The parameter RAM is initialized to hold a dummy transfer. + * + * Normal use is to pass a specific channel number as @channel, to make + * use of hardware events mapped to that channel. When the channel will + * be used only for software triggering or event chaining, channels not + * mapped to hardware events (or mapped to unused events) are preferable. + * + * DMA transfers start from a channel using edma_start(), or by + * chaining. When the transfer described in that channel's parameter RAM + * slot completes, that slot's data may be reloaded through a link. + * + * DMA errors are only reported to the @callback associated with the + * channel driving that transfer, but transfer completion callbacks can + * be sent to another channel under control of the TCC field in + * the option word of the transfer's parameter RAM set. Drivers must not + * use DMA transfer completion callbacks for channels they did not allocate. + * (The same applies to TCC codes used in transfer chaining.) + * + * Returns the number of the channel, else negative errno. + */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, + enum dma_event_q eventq_no) +{ + if (channel < 0) { + channel = 0; + for (;;) { + channel = find_next_bit(edma_noevent, + num_channels, channel); + if (channel == num_channels) + return -ENOMEM; + if (!test_and_set_bit(channel, edma_inuse)) + break; + channel++; + } + } else if (channel >= num_channels) { + return -EINVAL; + } else if (test_and_set_bit(channel, edma_inuse)) { + return -EBUSY; + } + + /* ensure access through shadow region 0 */ + edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f)); + + /* ensure no events are pending */ + edma_stop(channel); + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + + if (callback) + setup_dma_interrupt(channel, callback, data); + + map_dmach_queue(channel, eventq_no); + + return channel; +} +EXPORT_SYMBOL(edma_alloc_channel); + + +/** + * edma_free_channel - deallocate DMA channel + * @channel: dma channel returned from edma_alloc_channel() + * + * This deallocates the DMA channel and associated parameter RAM slot + * allocated by edma_alloc_channel(). + * + * Callers are responsible for ensuring the channel is inactive, and + * will not be reactivated by linking, chaining, or software calls to + * edma_start(). + */ +void edma_free_channel(unsigned channel) +{ + if (channel >= num_channels) + return; + + setup_dma_interrupt(channel, NULL, NULL); + /* REVISIT should probably take out of shadow region 0 */ + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + clear_bit(channel, edma_inuse); +} +EXPORT_SYMBOL(edma_free_channel); + +/** + * edma_alloc_slot - allocate DMA parameter RAM + * @slot: specific slot to allocate; negative for "any unused slot" + * + * This allocates a parameter RAM slot, initializing it to hold a + * dummy transfer. Slots allocated using this routine have not been + * mapped to a hardware DMA channel, and will normally be used by + * linking to them from a slot associated with a DMA channel. + * + * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific + * slots may be allocated on behalf of DSP firmware. + * + * Returns the number of the slot, else negative errno. + */ +int edma_alloc_slot(int slot) +{ + if (slot < 0) { + slot = num_channels; + for (;;) { + slot = find_next_zero_bit(edma_inuse, + num_slots, slot); + if (slot == num_slots) + return -ENOMEM; + if (!test_and_set_bit(slot, edma_inuse)) + break; + } + } else if (slot < num_channels || slot >= num_slots) { + return -EINVAL; + } else if (test_and_set_bit(slot, edma_inuse)) { + return -EBUSY; + } + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + + return slot; +} +EXPORT_SYMBOL(edma_alloc_slot); + +/** + * edma_free_slot - deallocate DMA parameter RAM + * @slot: parameter RAM slot returned from edma_alloc_slot() + * + * This deallocates the parameter RAM slot allocated by edma_alloc_slot(). + * Callers are responsible for ensuring the slot is inactive, and will + * not be activated. + */ +void edma_free_slot(unsigned slot) +{ + if (slot < num_channels || slot >= num_slots) + return; + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + clear_bit(slot, edma_inuse); +} +EXPORT_SYMBOL(edma_free_slot); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (i) -- read/write partial slots */ + +/** + * edma_set_src - set initial DMA source address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @src_port: physical address of source (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the source address is modified during the DMA transfer + * according to edma_set_src_index(). + */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set SAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8)); + } else { + /* clear SAM */ + i &= ~SAM; + } + edma_parm_write(PARM_OPT, slot, i); + + /* set the source port address + in source register of param structure */ + edma_parm_write(PARM_SRC, slot, src_port); + } +} +EXPORT_SYMBOL(edma_set_src); + +/** + * edma_set_dest - set initial DMA destination address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @dest_port: physical address of destination (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the destination address is modified during the DMA transfer + * according to edma_set_dest_index(). + */ +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set DAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8)); + } else { + /* clear DAM */ + i &= ~DAM; + } + edma_parm_write(PARM_OPT, slot, i); + /* set the destination port address + in dest register of param structure */ + edma_parm_write(PARM_DST, slot, dest_port); + } +} +EXPORT_SYMBOL(edma_set_dest); + +/** + * edma_get_position - returns the current transfer points + * @slot: parameter RAM slot being examined + * @src: pointer to source port position + * @dst: pointer to destination port position + * + * Returns current source and destination addresses for a particular + * parameter RAM slot. Its channel should not be active when this is called. + */ +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst) +{ + struct edmacc_param temp; + + edma_read_slot(slot, &temp); + if (src != NULL) + *src = temp.src; + if (dst != NULL) + *dst = temp.dst; +} +EXPORT_SYMBOL(edma_get_position); + +/** + * edma_set_src_index - configure DMA source address indexing + * @slot: parameter RAM slot being configured + * @src_bidx: byte offset between source arrays in a frame + * @src_cidx: byte offset between source frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0xffff0000, src_bidx); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0xffff0000, src_cidx); + } +} +EXPORT_SYMBOL(edma_set_src_index); + +/** + * edma_set_dest_index - configure DMA destination address indexing + * @slot: parameter RAM slot being configured + * @dest_bidx: byte offset between destination arrays in a frame + * @dest_cidx: byte offset between destination frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0x0000ffff, dest_bidx << 16); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0x0000ffff, dest_cidx << 16); + } +} +EXPORT_SYMBOL(edma_set_dest_index); + +/** + * edma_set_transfer_params - configure DMA transfer parameters + * @slot: parameter RAM slot being configured + * @acnt: how many bytes per array (at least one) + * @bcnt: how many arrays per frame (at least one) + * @ccnt: how many frames per block (at least one) + * @bcnt_rld: used only for A-Synchronized transfers; this specifies + * the value to reload into bcnt when it decrements to zero + * @sync_mode: ASYNC or ABSYNC + * + * See the EDMA3 documentation to understand how to configure and link + * transfers using the fields in PaRAM slots. If you are not doing it + * all at once with edma_write_slot(), you will use this routine + * plus two calls each for source and destination, setting the initial + * address and saying how to index that address. + * + * An example of an A-Synchronized transfer is a serial link using a + * single word shift register. In that case, @acnt would be equal to + * that word size; the serial controller issues a DMA synchronization + * event to transfer each word, and memory access by the DMA transfer + * controller will be word-at-a-time. + * + * An example of an AB-Synchronized transfer is a device using a FIFO. + * In that case, @acnt equals the FIFO width and @bcnt equals its depth. + * The controller with the FIFO issues DMA synchronization events when + * the FIFO threshold is reached, and the DMA transfer controller will + * transfer one frame to (or from) the FIFO. It will probably use + * efficient burst modes to access memory. + */ +void edma_set_transfer_params(unsigned slot, + u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_LINK_BCNTRLD, slot, + 0x0000ffff, bcnt_rld << 16); + if (sync_mode == ASYNC) + edma_parm_and(PARM_OPT, slot, ~SYNCDIM); + else + edma_parm_or(PARM_OPT, slot, SYNCDIM); + /* Set the acount, bcount, ccount registers */ + edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt); + edma_parm_write(PARM_CCNT, slot, ccnt); + } +} +EXPORT_SYMBOL(edma_set_transfer_params); + +/** + * edma_link - link one parameter RAM slot to another + * @from: parameter RAM slot originating the link + * @to: parameter RAM slot which is the link target + * + * The originating slot should not be part of any active DMA transfer. + */ +void edma_link(unsigned from, unsigned to) +{ + if (from >= num_slots) + return; + if (to >= num_slots) + return; + edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to)); +} +EXPORT_SYMBOL(edma_link); + +/** + * edma_unlink - cut link from one parameter RAM slot + * @from: parameter RAM slot originating the link + * + * The originating slot should not be part of any active DMA transfer. + * Its link is set to 0xffff. + */ +void edma_unlink(unsigned from) +{ + if (from >= num_slots) + return; + edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff); +} +EXPORT_SYMBOL(edma_unlink); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (ii) -- read/write whole parameter sets */ + +/** + * edma_write_slot - write parameter RAM data for slot + * @slot: number of parameter RAM slot being modified + * @param: data to be written into parameter RAM slot + * + * Use this to assign all parameters of a transfer at once. This + * allows more efficient setup of transfers than issuing multiple + * calls to set up those parameters in small pieces, and provides + * complete control over all transfer options. + */ +void edma_write_slot(unsigned slot, const struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE); +} +EXPORT_SYMBOL(edma_write_slot); + +/** + * edma_read_slot - read parameter RAM data from slot + * @slot: number of parameter RAM slot being copied + * @param: where to store copy of parameter RAM data + * + * Use this to read data from a parameter RAM slot, perhaps to + * save them as a template for later reuse. + */ +void edma_read_slot(unsigned slot, struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE); +} +EXPORT_SYMBOL(edma_read_slot); + +/*-----------------------------------------------------------------------*/ + +/* Various EDMA channel control operations */ + +/** + * edma_pause - pause dma on a channel + * @channel: on which edma_start() has been called + * + * This temporarily disables EDMA hardware events on the specified channel, + * preventing them from triggering new transfers on its behalf + */ +void edma_pause(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_pause); + +/** + * edma_resume - resumes dma on a paused channel + * @channel: on which edma_pause() has been called + * + * This re-enables EDMA hardware events on the specified channel. + */ +void edma_resume(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EESR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_resume); + +/** + * edma_start - start dma on a channel + * @channel: channel being activated + * + * Channels with event associations will be triggered by their hardware + * events, and channels without such associations will be triggered by + * software. (At this writing there is no interface for using software + * triggers except with channels that don't support hardware triggers.) + * + * Returns zero on success, else negative errno. + */ +int edma_start(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + /* EDMA channels without event association */ + if (test_bit(channel, edma_noevent)) { + pr_debug("EDMA: ESR%d %08x\n", j, + edma_shadow0_read_array(SH_ESR, j)); + edma_shadow0_write_array(SH_ESR, j, mask); + return 0; + } + + /* EDMA channel with event association */ + pr_debug("EDMA: ER%d %08x\n", j, + edma_shadow0_read_array(SH_ER, j)); + /* Clear any pending error */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_shadow0_write_array(SH_EESR, j, mask); + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + return 0; + } + + return -EINVAL; +} +EXPORT_SYMBOL(edma_start); + +/** + * edma_stop - stops dma on the channel passed + * @channel: channel being deactivated + * + * When @lch is a channel, any active transfer is paused and + * all pending hardware events are cleared. The current transfer + * may not be resumed, and the channel's Parameter RAM should be + * reinitialized before being reused. + */ +void edma_stop(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, j, mask); + edma_shadow0_write_array(SH_ECR, j, mask); + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write_array(EDMA_EMCR, j, mask); + + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + + /* REVISIT: consider guarding against inappropriate event + * chaining by overwriting with dummy_paramset. + */ + } +} +EXPORT_SYMBOL(edma_stop); + +/****************************************************************************** + * + * It cleans ParamEntry qand bring back EDMA to initial state if media has + * been removed before EDMA has finished.It is usedful for removable media. + * Arguments: + * ch_no - channel no + * + * Return: zero on success, or corresponding error no on failure + * + * FIXME this should not be needed ... edma_stop() should suffice. + * + *****************************************************************************/ + +void edma_clean_channel(unsigned channel) +{ + if (channel < num_channels) { + int j = (channel >> 5); + unsigned int mask = 1 << (channel & 0x1f); + + pr_debug("EDMA: EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + edma_shadow0_write_array(SH_ECR, j, mask); + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3); + } +} +EXPORT_SYMBOL(edma_clean_channel); + +/* + * edma_clear_event - clear an outstanding event on the DMA channel + * Arguments: + * channel - channel number + */ +void edma_clear_event(unsigned channel) +{ + if (channel >= num_channels) + return; + if (channel < 32) + edma_write(EDMA_ECR, 1 << channel); + else + edma_write(EDMA_ECRH, 1 << (channel - 32)); +} +EXPORT_SYMBOL(edma_clear_event); + +/*-----------------------------------------------------------------------*/ + +static int __init edma_probe(struct platform_device *pdev) +{ + struct edma_soc_info *info = pdev->dev.platform_data; + int i; + int status; + const s8 *noevent; + int irq = 0, err_irq = 0; + struct resource *r; + resource_size_t len; + + if (!info) + return -ENODEV; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc"); + if (!r) + return -ENODEV; + + len = r->end - r->start + 1; + + r = request_mem_region(r->start, len, r->name); + if (!r) + return -EBUSY; + + edmacc_regs_base = ioremap(r->start, len); + if (!edmacc_regs_base) { + status = -EBUSY; + goto fail1; + } + + num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH); + num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY); + + dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base); + + for (i = 0; i < num_slots; i++) + memcpy_toio(edmacc_regs_base + PARM_OFFSET(i), + &dummy_paramset, PARM_SIZE); + + noevent = info->noevent; + if (noevent) { + while (*noevent != -1) + set_bit(*noevent++, edma_noevent); + } + + irq = platform_get_irq(pdev, 0); + status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + irq, status); + goto fail; + } + + err_irq = platform_get_irq(pdev, 1); + status = request_irq(err_irq, dma_ccerr_handler, 0, + "edma_error", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + err_irq, status); + goto fail; + } + + if (tc_errs_handled) { + status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0, + "edma_tc0", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + IRQ_TCERRINT0, status); + return status; + } + status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0, + "edma_tc1", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d --> %d\n", + IRQ_TCERRINT, status); + return status; + } + } + + /* Everything lives on transfer controller 1 until otherwise specified. + * This way, long transfers on the low priority queue + * started by the codec engine will not cause audio defects. + */ + for (i = 0; i < num_channels; i++) + map_dmach_queue(i, EVENTQ_1); + + /* Event queue to TC mapping */ + for (i = 0; queue_tc_mapping[i][0] != -1; i++) + map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]); + + /* Event queue priority mapping */ + for (i = 0; queue_priority_mapping[i][0] != -1; i++) + assign_priority_to_queue(queue_priority_mapping[i][0], + queue_priority_mapping[i][1]); + + for (i = 0; i < info->n_region; i++) { + edma_write_array2(EDMA_DRAE, i, 0, 0x0); + edma_write_array2(EDMA_DRAE, i, 1, 0x0); + edma_write_array(EDMA_QRAE, i, 0x0); + } + + return 0; + +fail: + if (err_irq) + free_irq(err_irq, NULL); + if (irq) + free_irq(irq, NULL); + iounmap(edmacc_regs_base); +fail1: + release_mem_region(r->start, len); + return status; +} + + +static struct platform_driver edma_driver = { + .driver.name = "edma", +}; + +static int __init edma_init(void) +{ + return platform_driver_probe(&edma_driver, edma_probe); +} +arch_initcall(edma_init); + diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index b49e9d092aab..1aba41c6351e 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -20,6 +20,7 @@ #include <linux/irq.h> #include <linux/bitops.h> +#include <mach/cputype.h> #include <mach/irqs.h> #include <mach/hardware.h> #include <mach/gpio.h> @@ -36,9 +37,10 @@ struct davinci_gpio { static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; +static unsigned __initdata ngpio; /* create a non-inlined version */ -static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio) +static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio) { return __gpio_to_controller(gpio); } @@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(void) { int i, base; - for (i = 0, base = 0; - i < ARRAY_SIZE(chips); - i++, base += 32) { + /* The gpio banks conceptually expose a segmented bitmap, + * and "ngpio" is one more than the largest zero-based + * bit index that's valid. + */ + if (cpu_is_davinci_dm355()) { /* or dm335() */ + ngpio = 104; + } else if (cpu_is_davinci_dm644x()) { /* or dm337() */ + ngpio = 71; + } else if (cpu_is_davinci_dm646x()) { + /* NOTE: each bank has several "reserved" bits, + * unusable as GPIOs. Only 33 of the GPIO numbers + * are usable, and we're not rejecting the others. + */ + ngpio = 43; + } else { + /* if cpu_is_davinci_dm643x() ngpio = 111 */ + pr_err("GPIO setup: how many GPIOs?\n"); + return -EINVAL; + } + + if (WARN_ON(DAVINCI_N_GPIO < ngpio)) + ngpio = DAVINCI_N_GPIO; + + for (i = 0, base = 0; base < ngpio; i++, base += 32) { chips[i].chip.label = "DaVinci"; chips[i].chip.direction_input = davinci_direction_in; @@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(void) chips[i].chip.set = davinci_gpio_set; chips[i].chip.base = base; - chips[i].chip.ngpio = DAVINCI_N_GPIO - base; + chips[i].chip.ngpio = ngpio - base; if (chips[i].chip.ngpio > 32) chips[i].chip.ngpio = 32; @@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup); * We expect irqs will normally be set up as input pins, but they can also be * used as output pins ... which is convenient for testing. * - * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition - * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have - * a good way to hook those up ... + * NOTE: The first few GPIOs also have direct INTC hookups in addition + * to their GPIOBNK0 irq, with a bit less overhead but less flexibility + * on triggering (e.g. no edge options). We don't try to use those. * - * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also + * All those INTC hookups (direct, plus several IRQ banks) can also * serve as EDMA event triggers. */ @@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) } /* - * NOTE: for suspend/resume, probably best to make a sysdev (and class) - * with its suspend/resume calls hooking into the results of the set_wake() + * NOTE: for suspend/resume, probably best to make a platform_device with + * suspend_late/resume_resume calls hooking into results of the set_wake() * calls ... so if no gpios are wakeup events the clock can be disabled, * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 - * can be set appropriately for GPIOV33 pins. + * (dm6446) can be set appropriately for GPIOV33 pins. */ static int __init davinci_gpio_irq_setup(void) { unsigned gpio, irq, bank; + unsigned bank_irq; struct clk *clk; + u32 binten = 0; + + if (cpu_is_davinci_dm355()) { /* or dm335() */ + bank_irq = IRQ_DM355_GPIOBNK0; + } else if (cpu_is_davinci_dm644x()) { + bank_irq = IRQ_GPIOBNK0; + } else if (cpu_is_davinci_dm646x()) { + bank_irq = IRQ_DM646X_GPIOBNK0; + } else { + printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); + return -EINVAL; + } clk = clk_get(NULL, "gpio"); if (IS_ERR(clk)) { printk(KERN_ERR "Error %ld getting gpio clock?\n", PTR_ERR(clk)); - return 0; + return PTR_ERR(clk); } - clk_enable(clk); - for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0; - gpio < DAVINCI_N_GPIO; bank++) { + for (gpio = 0, irq = gpio_to_irq(0), bank = 0; + gpio < ngpio; + bank++, bank_irq++) { struct gpio_controller *__iomem g = gpio2controller(gpio); unsigned i; @@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup(void) __raw_writel(~0, &g->clr_rising); /* set up all irqs in this bank */ - set_irq_chained_handler(bank, gpio_irq_handler); - set_irq_chip_data(bank, g); - set_irq_data(bank, (void *)irq); + set_irq_chained_handler(bank_irq, gpio_irq_handler); + set_irq_chip_data(bank_irq, g); + set_irq_data(bank_irq, (void *)irq); - for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO; - i++, irq++, gpio++) { + for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { set_irq_chip(irq, &gpio_irqchip); set_irq_chip_data(irq, g); set_irq_handler(irq, handle_simple_irq); set_irq_flags(irq, IRQF_VALID); } + + binten |= BIT(bank); } /* BINTEN -- per-bank interrupt enable. genirq would also let these * bits be set/cleared dynamically. */ - __raw_writel(0x1f, (void *__iomem) + __raw_writel(binten, (void *__iomem) IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08)); printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); return 0; } - arch_initcall(davinci_gpio_irq_setup); diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c index bf067d604918..018b994cd794 100644 --- a/arch/arm/mach-davinci/id.c +++ b/arch/arm/mach-davinci/id.c @@ -15,7 +15,9 @@ #include <linux/init.h> #include <linux/io.h> -#define JTAG_ID_BASE 0x01c40028 +#define JTAG_ID_BASE IO_ADDRESS(0x01c40028) + +static unsigned int davinci_revision; struct davinci_id { u8 variant; /* JTAG ID bits 31:28 */ @@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] __initdata = { .manufacturer = 0x017, .type = 0x64460000, }, + { + /* DM646X */ + .part_no = 0xb770, + .variant = 0x0, + .manufacturer = 0x017, + .type = 0x64670000, + }, + { + /* DM355 */ + .part_no = 0xb73b, + .variant = 0x0, + .manufacturer = 0x00f, + .type = 0x03550000, + }, }; /* @@ -42,7 +58,7 @@ static u16 __init davinci_get_part_no(void) { u32 dev_id, part_no; - dev_id = davinci_readl(JTAG_ID_BASE); + dev_id = __raw_readl(JTAG_ID_BASE); part_no = ((dev_id >> 12) & 0xffff); @@ -56,13 +72,19 @@ static u8 __init davinci_get_variant(void) { u32 variant; - variant = davinci_readl(JTAG_ID_BASE); + variant = __raw_readl(JTAG_ID_BASE); variant = (variant >> 28) & 0xf; return variant; } +unsigned int davinci_rev(void) +{ + return davinci_revision >> 16; +} +EXPORT_SYMBOL(davinci_rev); + void __init davinci_check_revision(void) { int i; @@ -75,7 +97,7 @@ void __init davinci_check_revision(void) /* First check only the major version in a safe way */ for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == (davinci_ids[i].part_no)) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } @@ -84,10 +106,11 @@ void __init davinci_check_revision(void) for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == davinci_ids[i].part_no && variant == davinci_ids[i].variant) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } - printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant); + printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n", + davinci_rev(), variant); } diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h new file mode 100644 index 000000000000..3216f21c1238 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h @@ -0,0 +1,20 @@ +/* + * DaVinci DM6446 EVM board specific headers + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or ifndef. + */ + +#ifndef _MACH_DAVINCI_DM6446EVM_H +#define _MACH_DAVINCI_DM6446EVM_H + +#include <linux/types.h> + +int dm6446evm_eeprom_read(char *buf, off_t off, size_t count); +int dm6446evm_eeprom_write(char *buf, off_t off, size_t count); + +#endif diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h new file mode 100644 index 000000000000..730c49d1ebd8 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/clkdev.h @@ -0,0 +1,13 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +static inline int __clk_get(struct clk *clk) +{ + return 1; +} + +static inline void __clk_put(struct clk *clk) +{ +} + +#endif diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h index 38bdd49bc181..a3b040219876 100644 --- a/arch/arm/mach-davinci/include/mach/clock.h +++ b/arch/arm/mach-davinci/include/mach/clock.h @@ -17,6 +17,5 @@ struct clk; extern int clk_register(struct clk *clk); extern void clk_unregister(struct clk *clk); -extern int davinci_clk_init(void); #endif diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 4b522e5c70ec..191770976250 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -16,6 +16,12 @@ struct sys_timer; extern struct sys_timer davinci_timer; +extern void davinci_irq_init(void); +extern void davinci_map_common_io(void); + +/* parameters describe VBUS sourcing for host mode */ +extern void setup_usb(unsigned mA, unsigned potpgt_msec); + /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h new file mode 100644 index 000000000000..27cfb1b3a662 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -0,0 +1,49 @@ +/* + * DaVinci CPU type detection + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * Defines the cpu_is_*() macros for runtime detection of DaVinci + * device type. In addtion, if support for a given device is not + * compiled in to the kernel, the macros return 0 so that + * resulting code can be optimized out. + * + * 2009 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef _ASM_ARCH_CPU_H +#define _ASM_ARCH_CPU_H + +extern unsigned int davinci_rev(void); + +#define IS_DAVINCI_CPU(type, id) \ +static inline int is_davinci_dm ##type(void) \ +{ \ + return (davinci_rev() == (id)) ? 1 : 0; \ +} + +IS_DAVINCI_CPU(644x, 0x6446) +IS_DAVINCI_CPU(646x, 0x6467) +IS_DAVINCI_CPU(355, 0x355) + +#ifdef CONFIG_ARCH_DAVINCI_DM644x +#define cpu_is_davinci_dm644x() is_davinci_dm644x() +#else +#define cpu_is_davinci_dm644x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM646x +#define cpu_is_davinci_dm646x() is_davinci_dm646x() +#else +#define cpu_is_davinci_dm646x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM355 +#define cpu_is_davinci_dm355() is_davinci_dm355() +#else +#define cpu_is_davinci_dm355() 0 +#endif + +#endif diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h new file mode 100644 index 000000000000..3dcb9f4e58b4 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -0,0 +1,37 @@ +/* + * This file contains the processor specific definitions + * of the TI DM644x. + * + * Copyright (C) 2008 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ASM_ARCH_DM644X_H +#define __ASM_ARCH_DM644X_H + +#include <linux/platform_device.h> +#include <mach/hardware.h> + +#define DM644X_EMAC_BASE (0x01C80000) +#define DM644X_EMAC_CNTRL_OFFSET (0x0000) +#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) +#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) +#define DM644X_EMAC_MDIO_OFFSET (0x4000) +#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) + +void __init dm644x_init(void); + +#endif /* __ASM_ARCH_DM644X_H */ diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h new file mode 100644 index 000000000000..f6fc5396dafc --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -0,0 +1,228 @@ +/* + * TI DAVINCI dma definitions + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * This EDMA3 programming framework exposes two basic kinds of resource: + * + * Channel Triggers transfers, usually from a hardware event but + * also manually or by "chaining" from DMA completions. + * Each channel is coupled to a Parameter RAM (PaRAM) slot. + * + * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM + * "set"), source and destination addresses, a link to a + * next PaRAM slot (if any), options for the transfer, and + * instructions for updating those addresses. There are + * more than twice as many slots as event channels. + * + * Each PaRAM set describes a sequence of transfers, either for one large + * buffer or for several discontiguous smaller buffers. An EDMA transfer + * is driven only from a channel, which performs the transfers specified + * in its PaRAM slot until there are no more transfers. When that last + * transfer completes, the "link" field may be used to reload the channel's + * PaRAM slot with a new transfer descriptor. + * + * The EDMA Channel Controller (CC) maps requests from channels into physical + * Transfer Controller (TC) requests when the channel triggers (by hardware + * or software events, or by chaining). The two physical DMA channels provided + * by the TCs are thus shared by many logical channels. + * + * DaVinci hardware also has a "QDMA" mechanism which is not currently + * supported through this interface. (DSP firmware uses it though.) + */ + +#ifndef EDMA_H_ +#define EDMA_H_ + +/* PaRAM slots are laid out like this */ +struct edmacc_param { + unsigned int opt; + unsigned int src; + unsigned int a_b_cnt; + unsigned int dst; + unsigned int src_dst_bidx; + unsigned int link_bcntrld; + unsigned int src_dst_cidx; + unsigned int ccnt; +}; + +#define CCINT0_INTERRUPT 16 +#define CCERRINT_INTERRUPT 17 +#define TCERRINT0_INTERRUPT 18 +#define TCERRINT1_INTERRUPT 19 + +/* fields in edmacc_param.opt */ +#define SAM BIT(0) +#define DAM BIT(1) +#define SYNCDIM BIT(2) +#define STATIC BIT(3) +#define EDMA_FWID (0x07 << 8) +#define TCCMODE BIT(11) +#define EDMA_TCC(t) ((t) << 12) +#define TCINTEN BIT(20) +#define ITCINTEN BIT(21) +#define TCCHEN BIT(22) +#define ITCCHEN BIT(23) + +#define TRWORD (0x7<<2) +#define PAENTRY (0x1ff<<5) + +/* Drivers should avoid using these symbolic names for dm644x + * channels, and use platform_device IORESOURCE_DMA resources + * instead. (Other DaVinci chips have different peripherals + * and thus have different DMA channel mappings.) + */ +#define DAVINCI_DMA_MCBSP_TX 2 +#define DAVINCI_DMA_MCBSP_RX 3 +#define DAVINCI_DMA_VPSS_HIST 4 +#define DAVINCI_DMA_VPSS_H3A 5 +#define DAVINCI_DMA_VPSS_PRVU 6 +#define DAVINCI_DMA_VPSS_RSZ 7 +#define DAVINCI_DMA_IMCOP_IMXINT 8 +#define DAVINCI_DMA_IMCOP_VLCDINT 9 +#define DAVINCI_DMA_IMCO_PASQINT 10 +#define DAVINCI_DMA_IMCOP_DSQINT 11 +#define DAVINCI_DMA_SPI_SPIX 16 +#define DAVINCI_DMA_SPI_SPIR 17 +#define DAVINCI_DMA_UART0_URXEVT0 18 +#define DAVINCI_DMA_UART0_UTXEVT0 19 +#define DAVINCI_DMA_UART1_URXEVT1 20 +#define DAVINCI_DMA_UART1_UTXEVT1 21 +#define DAVINCI_DMA_UART2_URXEVT2 22 +#define DAVINCI_DMA_UART2_UTXEVT2 23 +#define DAVINCI_DMA_MEMSTK_MSEVT 24 +#define DAVINCI_DMA_MMCRXEVT 26 +#define DAVINCI_DMA_MMCTXEVT 27 +#define DAVINCI_DMA_I2C_ICREVT 28 +#define DAVINCI_DMA_I2C_ICXEVT 29 +#define DAVINCI_DMA_GPIO_GPINT0 32 +#define DAVINCI_DMA_GPIO_GPINT1 33 +#define DAVINCI_DMA_GPIO_GPINT2 34 +#define DAVINCI_DMA_GPIO_GPINT3 35 +#define DAVINCI_DMA_GPIO_GPINT4 36 +#define DAVINCI_DMA_GPIO_GPINT5 37 +#define DAVINCI_DMA_GPIO_GPINT6 38 +#define DAVINCI_DMA_GPIO_GPINT7 39 +#define DAVINCI_DMA_GPIO_GPBNKINT0 40 +#define DAVINCI_DMA_GPIO_GPBNKINT1 41 +#define DAVINCI_DMA_GPIO_GPBNKINT2 42 +#define DAVINCI_DMA_GPIO_GPBNKINT3 43 +#define DAVINCI_DMA_GPIO_GPBNKINT4 44 +#define DAVINCI_DMA_TIMER0_TINT0 48 +#define DAVINCI_DMA_TIMER1_TINT1 49 +#define DAVINCI_DMA_TIMER2_TINT2 50 +#define DAVINCI_DMA_TIMER3_TINT3 51 +#define DAVINCI_DMA_PWM0 52 +#define DAVINCI_DMA_PWM1 53 +#define DAVINCI_DMA_PWM2 54 + +/*ch_status paramater of callback function possible values*/ +#define DMA_COMPLETE 1 +#define DMA_CC_ERROR 2 +#define DMA_TC1_ERROR 3 +#define DMA_TC2_ERROR 4 + +enum address_mode { + INCR = 0, + FIFO = 1 +}; + +enum fifo_width { + W8BIT = 0, + W16BIT = 1, + W32BIT = 2, + W64BIT = 3, + W128BIT = 4, + W256BIT = 5 +}; + +enum dma_event_q { + EVENTQ_0 = 0, + EVENTQ_1 = 1, + EVENTQ_DEFAULT = -1 +}; + +enum sync_dimension { + ASYNC = 0, + ABSYNC = 1 +}; + +#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ +#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ + +/* alloc/free DMA channels and their dedicated parameter RAM slots */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, enum dma_event_q); +void edma_free_channel(unsigned channel); + +/* alloc/free parameter RAM slots */ +int edma_alloc_slot(int slot); +void edma_free_slot(unsigned slot); + +/* calls that operate on part of a parameter RAM slot */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width); +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width); +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst); +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); +void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode); +void edma_link(unsigned from, unsigned to); +void edma_unlink(unsigned from); + +/* calls that operate on an entire parameter RAM slot */ +void edma_write_slot(unsigned slot, const struct edmacc_param *params); +void edma_read_slot(unsigned slot, struct edmacc_param *params); + +/* channel control operations */ +int edma_start(unsigned channel); +void edma_stop(unsigned channel); +void edma_clean_channel(unsigned channel); +void edma_clear_event(unsigned channel); +void edma_pause(unsigned channel); +void edma_resume(unsigned channel); + +/* UNRELATED TO DMA */ +int davinci_alloc_iram(unsigned size); +void davinci_free_iram(unsigned addr, unsigned size); + +/* platform_data for EDMA driver */ +struct edma_soc_info { + + /* how many dma resources of each type */ + unsigned n_channel; + unsigned n_region; + unsigned n_slot; + unsigned n_tc; + + /* list of channels with no even trigger; terminated by "-1" */ + const s8 *noevent; +}; + +#endif diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index b456f079f43f..efe3281364e6 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -15,9 +15,11 @@ #include <linux/io.h> #include <asm-generic/gpio.h> -#include <mach/hardware.h> + #include <mach/irqs.h> +#define DAVINCI_GPIO_BASE 0x01C67000 + /* * basic gpio routines * @@ -26,23 +28,18 @@ * go through boot loaders. * * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are + * need to pay attention to PINMUX registers to be sure those pins are * used as gpios, not with other peripherals. * * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code should write GPIO(N) or: - * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53) - * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70) - * - * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc - * for now, that's != GPIO(N) + * and maybe for later updates, code may write GPIO(N). These may be + * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip + * may not support all the GPIOs in that range. * * GPIOs can also be on external chips, numbered after the ones built-in * to the DaVinci chip. For now, they won't be usable as IRQ sources. */ -#define GPIO(X) (X) /* 0 <= X <= 70 */ -#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */ -#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ struct gpio_controller { u32 dir; @@ -71,12 +68,14 @@ __gpio_to_controller(unsigned gpio) { void *__iomem ptr; - if (gpio < 32) + if (gpio < 32 * 1) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); - else if (gpio < 64) + else if (gpio < 32 * 2) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); - else if (gpio < DAVINCI_N_GPIO) + else if (gpio < 32 * 3) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); + else if (gpio < 32 * 4) + ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88); else ptr = NULL; return ptr; diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index a2e8969afaca..48c77934d519 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -1,9 +1,9 @@ /* - * Common hardware definitions + * Hardware definitions common to all DaVinci family processors * - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> + * Author: Kevin Hilman, Deep Root Systems, LLC * - * 2007 (c) MontaVista Software, Inc. This file is licensed under + * 2007 (c) Deep Root Systems, LLC. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. @@ -12,41 +12,16 @@ #define __ASM_ARCH_HARDWARE_H /* - * Base register addresses + * Before you add anything to ths file: + * + * This header is for defines common to ALL DaVinci family chips. + * Anything that is chip specific should go in <chipname>.h, + * and the chip/board init code should then explicitly include + * <chipname>.h */ -#define DAVINCI_DMA_3PCC_BASE (0x01C00000) -#define DAVINCI_DMA_3PTC0_BASE (0x01C10000) -#define DAVINCI_DMA_3PTC1_BASE (0x01C10400) -#define DAVINCI_I2C_BASE (0x01C21000) -#define DAVINCI_PWM0_BASE (0x01C22000) -#define DAVINCI_PWM1_BASE (0x01C22400) -#define DAVINCI_PWM2_BASE (0x01C22800) -#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000) -#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800) -#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00) -#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000) -#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000) -#define DAVINCI_IEEE1394_BASE (0x01C60000) -#define DAVINCI_USB_OTG_BASE (0x01C64000) -#define DAVINCI_CFC_ATA_BASE (0x01C66000) -#define DAVINCI_SPI_BASE (0x01C66800) -#define DAVINCI_GPIO_BASE (0x01C67000) -#define DAVINCI_UHPI_BASE (0x01C67800) -#define DAVINCI_VPSS_REGS_BASE (0x01C70000) -#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000) -#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000) -#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000) -#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000) -#define DAVINCI_IMCOP_BASE (0x01CC0000) -#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000) -#define DAVINCI_VLYNQ_BASE (0x01E01000) -#define DAVINCI_MCBSP_BASE (0x01E02000) -#define DAVINCI_MMC_SD_BASE (0x01E10000) -#define DAVINCI_MS_BASE (0x01E20000) -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000) -#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000) +#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 + +/* System control register offsets */ +#define DM64XX_VDD3P3V_PWDN 0x48 #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h index a48795fd2417..2479785405af 100644 --- a/arch/arm/mach-davinci/include/mach/io.h +++ b/arch/arm/mach-davinci/include/mach/io.h @@ -40,22 +40,12 @@ #else #define IOMEM(x) ((void __force __iomem *)(x)) -/* - * Functions to access the DaVinci IO region - * - * NOTE: - Use davinci_read/write[bwl] for physical register addresses - * - Use __raw_read/write[bwl]() for virtual register addresses - * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses - * - DO NOT use hardcoded virtual addresses to allow changing the - * IO address space again if needed - */ -#define davinci_readb(a) __raw_readb(IO_ADDRESS(a)) -#define davinci_readw(a) __raw_readw(IO_ADDRESS(a)) -#define davinci_readl(a) __raw_readl(IO_ADDRESS(a)) +#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t) +#define __arch_iounmap(v) davinci_iounmap(v) -#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a)) -#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a)) -#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a)) +void __iomem *davinci_ioremap(unsigned long phys, size_t size, + unsigned int type); +void davinci_iounmap(volatile void __iomem *addr); #endif /* __ASSEMBLER__ */ #endif /* __ASM_ARCH_IO_H */ diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index f4c5ca6da9f4..18066074c995 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -96,10 +96,111 @@ #define IRQ_EMUINT 63 #define DAVINCI_N_AINTC_IRQ 64 -#define DAVINCI_N_GPIO 71 +#define DAVINCI_N_GPIO 104 #define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO) #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34 +/* DaVinci DM6467-specific Interrupts */ +#define IRQ_DM646X_VP_VERTINT0 0 +#define IRQ_DM646X_VP_VERTINT1 1 +#define IRQ_DM646X_VP_VERTINT2 2 +#define IRQ_DM646X_VP_VERTINT3 3 +#define IRQ_DM646X_VP_ERRINT 4 +#define IRQ_DM646X_RESERVED_1 5 +#define IRQ_DM646X_RESERVED_2 6 +#define IRQ_DM646X_WDINT 7 +#define IRQ_DM646X_CRGENINT0 8 +#define IRQ_DM646X_CRGENINT1 9 +#define IRQ_DM646X_TSIFINT0 10 +#define IRQ_DM646X_TSIFINT1 11 +#define IRQ_DM646X_VDCEINT 12 +#define IRQ_DM646X_USBINT 13 +#define IRQ_DM646X_USBDMAINT 14 +#define IRQ_DM646X_PCIINT 15 +#define IRQ_DM646X_TCERRINT2 20 +#define IRQ_DM646X_TCERRINT3 21 +#define IRQ_DM646X_IDE 22 +#define IRQ_DM646X_HPIINT 23 +#define IRQ_DM646X_EMACRXTHINT 24 +#define IRQ_DM646X_EMACRXINT 25 +#define IRQ_DM646X_EMACTXINT 26 +#define IRQ_DM646X_EMACMISCINT 27 +#define IRQ_DM646X_MCASP0TXINT 28 +#define IRQ_DM646X_MCASP0RXINT 29 +#define IRQ_DM646X_RESERVED_3 31 +#define IRQ_DM646X_MCASP1TXINT 32 +#define IRQ_DM646X_VLQINT 38 +#define IRQ_DM646X_UARTINT2 42 +#define IRQ_DM646X_SPINT0 43 +#define IRQ_DM646X_SPINT1 44 +#define IRQ_DM646X_DSP2ARMINT 45 +#define IRQ_DM646X_RESERVED_4 46 +#define IRQ_DM646X_PSCINT 47 +#define IRQ_DM646X_GPIO0 48 +#define IRQ_DM646X_GPIO1 49 +#define IRQ_DM646X_GPIO2 50 +#define IRQ_DM646X_GPIO3 51 +#define IRQ_DM646X_GPIO4 52 +#define IRQ_DM646X_GPIO5 53 +#define IRQ_DM646X_GPIO6 54 +#define IRQ_DM646X_GPIO7 55 +#define IRQ_DM646X_GPIOBNK0 56 +#define IRQ_DM646X_GPIOBNK1 57 +#define IRQ_DM646X_GPIOBNK2 58 +#define IRQ_DM646X_DDRINT 59 +#define IRQ_DM646X_AEMIFINT 60 + +/* DaVinci DM355-specific Interrupts */ +#define IRQ_DM355_CCDC_VDINT0 0 +#define IRQ_DM355_CCDC_VDINT1 1 +#define IRQ_DM355_CCDC_VDINT2 2 +#define IRQ_DM355_IPIPE_HST 3 +#define IRQ_DM355_H3AINT 4 +#define IRQ_DM355_IPIPE_SDR 5 +#define IRQ_DM355_IPIPEIFINT 6 +#define IRQ_DM355_OSDINT 7 +#define IRQ_DM355_VENCINT 8 +#define IRQ_DM355_IMCOPINT 11 +#define IRQ_DM355_RTOINT 13 +#define IRQ_DM355_TINT4 13 +#define IRQ_DM355_TINT2_TINT12 13 +#define IRQ_DM355_UARTINT2 14 +#define IRQ_DM355_TINT5 14 +#define IRQ_DM355_TINT2_TINT34 14 +#define IRQ_DM355_TINT6 15 +#define IRQ_DM355_TINT3_TINT12 15 +#define IRQ_DM355_SPINT1_0 17 +#define IRQ_DM355_SPINT1_1 18 +#define IRQ_DM355_SPINT2_0 19 +#define IRQ_DM355_SPINT2_1 21 +#define IRQ_DM355_TINT7 22 +#define IRQ_DM355_TINT3_TINT34 22 +#define IRQ_DM355_SDIOINT0 23 +#define IRQ_DM355_MMCINT0 26 +#define IRQ_DM355_MSINT 26 +#define IRQ_DM355_MMCINT1 27 +#define IRQ_DM355_PWMINT3 28 +#define IRQ_DM355_SDIOINT1 31 +#define IRQ_DM355_SPINT0_0 42 +#define IRQ_DM355_SPINT0_1 43 +#define IRQ_DM355_GPIO0 44 +#define IRQ_DM355_GPIO1 45 +#define IRQ_DM355_GPIO2 46 +#define IRQ_DM355_GPIO3 47 +#define IRQ_DM355_GPIO4 48 +#define IRQ_DM355_GPIO5 49 +#define IRQ_DM355_GPIO6 50 +#define IRQ_DM355_GPIO7 51 +#define IRQ_DM355_GPIO8 52 +#define IRQ_DM355_GPIO9 53 +#define IRQ_DM355_GPIOBNK0 54 +#define IRQ_DM355_GPIOBNK1 55 +#define IRQ_DM355_GPIOBNK2 56 +#define IRQ_DM355_GPIOBNK3 57 +#define IRQ_DM355_GPIOBNK4 58 +#define IRQ_DM355_GPIOBNK5 59 +#define IRQ_DM355_GPIOBNK6 60 + #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index c24b6782804d..bae22cb3e27b 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -1,55 +1,183 @@ /* - * DaVinci pin multiplexing defines + * Table of the DAVINCI register configurations for the PINMUX combinations * * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> * + * Based on linux/include/asm-arm/arch-omap/mux.h: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define DAVINCI_MUX_AEAW0 0 -#define DAVINCI_MUX_AEAW1 1 -#define DAVINCI_MUX_AEAW2 2 -#define DAVINCI_MUX_AEAW3 3 -#define DAVINCI_MUX_AEAW4 4 -#define DAVINCI_MUX_AECS4 10 -#define DAVINCI_MUX_AECS5 11 -#define DAVINCI_MUX_VLYNQWD0 12 -#define DAVINCI_MUX_VLYNQWD1 13 -#define DAVINCI_MUX_VLSCREN 14 -#define DAVINCI_MUX_VLYNQEN 15 -#define DAVINCI_MUX_HDIREN 16 -#define DAVINCI_MUX_ATAEN 17 -#define DAVINCI_MUX_RGB666 22 -#define DAVINCI_MUX_RGB888 23 -#define DAVINCI_MUX_LOEEN 24 -#define DAVINCI_MUX_LFLDEN 25 -#define DAVINCI_MUX_CWEN 26 -#define DAVINCI_MUX_CFLDEN 27 -#define DAVINCI_MUX_HPIEN 29 -#define DAVINCI_MUX_1394EN 30 -#define DAVINCI_MUX_EMACEN 31 - -#define DAVINCI_MUX_LEVEL2 32 -#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0) -#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1) -#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2) -#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3) -#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4) -#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5) -#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6) -#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7) -#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8) -#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9) -#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10) -#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16) -#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17) -#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18) - -extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable); - -#endif /* __ASM_ARCH_MUX_H */ + +#ifndef __INC_MACH_MUX_H +#define __INC_MACH_MUX_H + +/* System module registers */ +#define PINMUX0 0x00 +#define PINMUX1 0x04 +/* dm355 only */ +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define INTMUX 0x18 +#define EVTMUX 0x1c + +struct mux_config { + const char *name; + const char *mux_reg_name; + const unsigned char mux_reg; + const unsigned char mask_offset; + const unsigned char mask; + const unsigned char mode; + bool debug; +}; + +enum davinci_dm644x_index { + /* ATA and HDDIR functions */ + DM644X_HDIREN, + DM644X_ATAEN, + DM644X_ATAEN_DISABLE, + + /* HPI functions */ + DM644X_HPIEN_DISABLE, + + /* AEAW functions */ + DM644X_AEAW, + + /* Memory Stick */ + DM644X_MSTK, + + /* I2C */ + DM644X_I2C, + + /* ASP function */ + DM644X_MCBSP, + + /* UART1 */ + DM644X_UART1, + + /* UART2 */ + DM644X_UART2, + + /* PWM0 */ + DM644X_PWM0, + + /* PWM1 */ + DM644X_PWM1, + + /* PWM2 */ + DM644X_PWM2, + + /* VLYNQ function */ + DM644X_VLYNQEN, + DM644X_VLSCREN, + DM644X_VLYNQWD, + + /* EMAC and MDIO function */ + DM644X_EMACEN, + + /* GPIO3V[0:16] pins */ + DM644X_GPIO3V, + + /* GPIO pins */ + DM644X_GPIO0, + DM644X_GPIO3, + DM644X_GPIO43_44, + DM644X_GPIO46_47, + + /* VPBE */ + DM644X_RGB666, + + /* LCD */ + DM644X_LOEEN, + DM644X_LFLDEN, +}; + +enum davinci_dm646x_index { + /* ATA function */ + DM646X_ATAEN, + + /* AUDIO Clock */ + DM646X_AUDCK1, + DM646X_AUDCK0, + + /* CRGEN Control */ + DM646X_CRGMUX, + + /* VPIF Control */ + DM646X_STSOMUX_DISABLE, + DM646X_STSIMUX_DISABLE, + DM646X_PTSOMUX_DISABLE, + DM646X_PTSIMUX_DISABLE, + + /* TSIF Control */ + DM646X_STSOMUX, + DM646X_STSIMUX, + DM646X_PTSOMUX_PARALLEL, + DM646X_PTSIMUX_PARALLEL, + DM646X_PTSOMUX_SERIAL, + DM646X_PTSIMUX_SERIAL, +}; + +enum davinci_dm355_index { + /* MMC/SD 0 */ + DM355_MMCSD0, + + /* MMC/SD 1 */ + DM355_SD1_CLK, + DM355_SD1_CMD, + DM355_SD1_DATA3, + DM355_SD1_DATA2, + DM355_SD1_DATA1, + DM355_SD1_DATA0, + + /* I2C */ + DM355_I2C_SDA, + DM355_I2C_SCL, + + /* ASP0 function */ + DM355_MCBSP0_BDX, + DM355_MCBSP0_X, + DM355_MCBSP0_BFSX, + DM355_MCBSP0_BDR, + DM355_MCBSP0_R, + DM355_MCBSP0_BFSR, + + /* SPI0 */ + DM355_SPI0_SDI, + DM355_SPI0_SDENA0, + DM355_SPI0_SDENA1, + + /* IRQ muxing */ + DM355_INT_EDMA_CC, + DM355_INT_EDMA_TC0_ERR, + DM355_INT_EDMA_TC1_ERR, + + /* EDMA event muxing */ + DM355_EVT8_ASP1_TX, + DM355_EVT9_ASP1_RX, + DM355_EVT26_MMC0_RX, +}; + +#ifdef CONFIG_DAVINCI_MUX +/* setup pin muxing */ +extern void davinci_mux_init(void); +extern int davinci_mux_register(const struct mux_config *pins, + unsigned long size); +extern int davinci_cfg_reg(unsigned long reg_cfg); +#else +/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ +static inline void davinci_mux_init(void) {} +static inline int davinci_mux_register(const struct mux_config *pins, + unsigned long size) { return 0; } +static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } +#endif + +#endif /* __INC_MACH_MUX_H */ diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 4977aa071e1e..55a90d419fac 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -38,8 +38,6 @@ #define DAVINCI_LPSC_TPTC1 4 #define DAVINCI_LPSC_EMAC 5 #define DAVINCI_LPSC_EMAC_WRAPPER 6 -#define DAVINCI_LPSC_MDIO 7 -#define DAVINCI_LPSC_IEEE1394 8 #define DAVINCI_LPSC_USB 9 #define DAVINCI_LPSC_ATA 10 #define DAVINCI_LPSC_VLYNQ 11 @@ -47,7 +45,6 @@ #define DAVINCI_LPSC_DDR_EMIF 13 #define DAVINCI_LPSC_AEMIF 14 #define DAVINCI_LPSC_MMC_SD 15 -#define DAVINCI_LPSC_MEMSTICK 16 #define DAVINCI_LPSC_McBSP 17 #define DAVINCI_LPSC_I2C 18 #define DAVINCI_LPSC_UART0 19 @@ -73,4 +70,54 @@ #define DAVINCI_LPSC_GEM 39 #define DAVINCI_LPSC_IMCOP 40 +#define DM355_LPSC_TIMER3 5 +#define DM355_LPSC_SPI1 6 +#define DM355_LPSC_MMC_SD1 7 +#define DM355_LPSC_McBSP1 8 +#define DM355_LPSC_PWM3 10 +#define DM355_LPSC_SPI2 11 +#define DM355_LPSC_RTO 12 +#define DM355_LPSC_VPSS_DAC 41 + +/* + * LPSC Assignments + */ +#define DM646X_LPSC_ARM 0 +#define DM646X_LPSC_C64X_CPU 1 +#define DM646X_LPSC_HDVICP0 2 +#define DM646X_LPSC_HDVICP1 3 +#define DM646X_LPSC_TPCC 4 +#define DM646X_LPSC_TPTC0 5 +#define DM646X_LPSC_TPTC1 6 +#define DM646X_LPSC_TPTC2 7 +#define DM646X_LPSC_TPTC3 8 +#define DM646X_LPSC_PCI 13 +#define DM646X_LPSC_EMAC 14 +#define DM646X_LPSC_VDCE 15 +#define DM646X_LPSC_VPSSMSTR 16 +#define DM646X_LPSC_VPSSSLV 17 +#define DM646X_LPSC_TSIF0 18 +#define DM646X_LPSC_TSIF1 19 +#define DM646X_LPSC_DDR_EMIF 20 +#define DM646X_LPSC_AEMIF 21 +#define DM646X_LPSC_McASP0 22 +#define DM646X_LPSC_McASP1 23 +#define DM646X_LPSC_CRGEN0 24 +#define DM646X_LPSC_CRGEN1 25 +#define DM646X_LPSC_UART0 26 +#define DM646X_LPSC_UART1 27 +#define DM646X_LPSC_UART2 28 +#define DM646X_LPSC_PWM0 29 +#define DM646X_LPSC_PWM1 30 +#define DM646X_LPSC_I2C 31 +#define DM646X_LPSC_SPI 32 +#define DM646X_LPSC_GPIO 33 +#define DM646X_LPSC_TIMER0 34 +#define DM646X_LPSC_TIMER1 35 +#define DM646X_LPSC_ARM_INTC 45 + +extern int davinci_psc_is_clk_active(unsigned int id); +extern void davinci_psc_config(unsigned int domain, unsigned int id, + char enable); + #endif /* __ASM_ARCH_PSC_H */ diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index fb8cb229bfd2..632847d74a1c 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -13,8 +13,23 @@ #include <mach/io.h> -#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) -#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) -#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) +#define DAVINCI_MAX_NR_UARTS 3 +#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) +#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) +#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) + +#define DM355_UART2_BASE (IO_PHYS + 0x206000) + +/* DaVinci UART register offsets */ +#define UART_DAVINCI_PWREMU 0x0c +#define UART_DM646X_SCR 0x10 +#define UART_DM646X_SCR_TX_WATERMARK 0x08 + +struct davinci_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + +extern void davinci_serial_init(struct davinci_uart_config *); #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index 299515f70b8b..a548abb513e2 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -51,7 +51,26 @@ void __init davinci_map_common_io(void) davinci_check_revision(); } -void __init davinci_init_common_hw(void) +#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) +#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst))) + +/* + * Intercept ioremap() requests for addresses in our fixed mapping regions. + */ +void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type) +{ + if (BETWEEN(p, IO_PHYS, IO_SIZE)) + return XLATE(p, IO_PHYS, IO_VIRT); + + return __arm_ioremap(p, size, type); +} +EXPORT_SYMBOL(davinci_ioremap); + +void davinci_iounmap(volatile void __iomem *addr) { - davinci_clk_init(); + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); } +EXPORT_SYMBOL(davinci_iounmap); diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index 38021af8359a..5a324c90e291 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -25,6 +25,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/cputype.h> #include <asm/mach/irq.h> #define IRQ_BIT(irq) ((irq) & 0x1f) @@ -40,14 +41,18 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C +const u8 *davinci_def_priorities; + +#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE) + static inline unsigned int davinci_irq_readl(int offset) { - return davinci_readl(DAVINCI_ARM_INTC_BASE + offset); + return __raw_readl(INTC_BASE + offset); } static inline void davinci_irq_writel(unsigned long value, int offset) { - davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset); + __raw_writel(value, INTC_BASE + offset); } /* Disable interrupt */ @@ -108,9 +113,8 @@ static struct irq_chip davinci_irq_chip_0 = { .unmask = davinci_unmask_irq, }; - /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { +static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { [IRQ_VDINT0] = 2, [IRQ_VDINT1] = 6, [IRQ_VDINT2] = 6, @@ -177,11 +181,149 @@ static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { [IRQ_EMUINT] = 7, }; +static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM646X_VP_VERTINT0] = 7, + [IRQ_DM646X_VP_VERTINT1] = 7, + [IRQ_DM646X_VP_VERTINT2] = 7, + [IRQ_DM646X_VP_VERTINT3] = 7, + [IRQ_DM646X_VP_ERRINT] = 7, + [IRQ_DM646X_RESERVED_1] = 7, + [IRQ_DM646X_RESERVED_2] = 7, + [IRQ_DM646X_WDINT] = 7, + [IRQ_DM646X_CRGENINT0] = 7, + [IRQ_DM646X_CRGENINT1] = 7, + [IRQ_DM646X_TSIFINT0] = 7, + [IRQ_DM646X_TSIFINT1] = 7, + [IRQ_DM646X_VDCEINT] = 7, + [IRQ_DM646X_USBINT] = 7, + [IRQ_DM646X_USBDMAINT] = 7, + [IRQ_DM646X_PCIINT] = 7, + [IRQ_CCINT0] = 7, /* dma */ + [IRQ_CCERRINT] = 7, /* dma */ + [IRQ_TCERRINT0] = 7, /* dma */ + [IRQ_TCERRINT] = 7, /* dma */ + [IRQ_DM646X_TCERRINT2] = 7, + [IRQ_DM646X_TCERRINT3] = 7, + [IRQ_DM646X_IDE] = 7, + [IRQ_DM646X_HPIINT] = 7, + [IRQ_DM646X_EMACRXTHINT] = 7, + [IRQ_DM646X_EMACRXINT] = 7, + [IRQ_DM646X_EMACTXINT] = 7, + [IRQ_DM646X_EMACMISCINT] = 7, + [IRQ_DM646X_MCASP0TXINT] = 7, + [IRQ_DM646X_MCASP0RXINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM646X_RESERVED_3] = 7, + [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ + [IRQ_TINT0_TINT34] = 7, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_DM646X_VLQINT] = 7, + [IRQ_I2C] = 7, + [IRQ_UARTINT0] = 7, + [IRQ_UARTINT1] = 7, + [IRQ_DM646X_UARTINT2] = 7, + [IRQ_DM646X_SPINT0] = 7, + [IRQ_DM646X_SPINT1] = 7, + [IRQ_DM646X_DSP2ARMINT] = 7, + [IRQ_DM646X_RESERVED_4] = 7, + [IRQ_DM646X_PSCINT] = 7, + [IRQ_DM646X_GPIO0] = 7, + [IRQ_DM646X_GPIO1] = 7, + [IRQ_DM646X_GPIO2] = 7, + [IRQ_DM646X_GPIO3] = 7, + [IRQ_DM646X_GPIO4] = 7, + [IRQ_DM646X_GPIO5] = 7, + [IRQ_DM646X_GPIO6] = 7, + [IRQ_DM646X_GPIO7] = 7, + [IRQ_DM646X_GPIOBNK0] = 7, + [IRQ_DM646X_GPIOBNK1] = 7, + [IRQ_DM646X_GPIOBNK2] = 7, + [IRQ_DM646X_DDRINT] = 7, + [IRQ_DM646X_AEMIFINT] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + +static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM355_CCDC_VDINT0] = 2, + [IRQ_DM355_CCDC_VDINT1] = 6, + [IRQ_DM355_CCDC_VDINT2] = 6, + [IRQ_DM355_IPIPE_HST] = 6, + [IRQ_DM355_H3AINT] = 6, + [IRQ_DM355_IPIPE_SDR] = 6, + [IRQ_DM355_IPIPEIFINT] = 6, + [IRQ_DM355_OSDINT] = 7, + [IRQ_DM355_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_DM355_RTOINT] = 4, + [IRQ_DM355_UARTINT2] = 7, + [IRQ_DM355_TINT6] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_DM355_SPINT2_1] = 7, + [IRQ_DM355_TINT7] = 4, + [IRQ_DM355_SDIOINT0] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_DM355_MMCINT1] = 7, + [IRQ_DM355_PWMINT3] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM355_SDIOINT1] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_DM355_SPINT0_0] = 3, + [IRQ_DM355_SPINT0_1] = 3, + [IRQ_DM355_GPIO0] = 3, + [IRQ_DM355_GPIO1] = 7, + [IRQ_DM355_GPIO2] = 4, + [IRQ_DM355_GPIO3] = 4, + [IRQ_DM355_GPIO4] = 7, + [IRQ_DM355_GPIO5] = 7, + [IRQ_DM355_GPIO6] = 7, + [IRQ_DM355_GPIO7] = 7, + [IRQ_DM355_GPIO8] = 7, + [IRQ_DM355_GPIO9] = 7, + [IRQ_DM355_GPIOBNK0] = 7, + [IRQ_DM355_GPIOBNK1] = 7, + [IRQ_DM355_GPIOBNK2] = 7, + [IRQ_DM355_GPIOBNK3] = 7, + [IRQ_DM355_GPIOBNK4] = 7, + [IRQ_DM355_GPIOBNK5] = 7, + [IRQ_DM355_GPIOBNK6] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { unsigned i; - const u8 *priority = default_priorities; + + if (cpu_is_davinci_dm644x()) + davinci_def_priorities = dm644x_default_priorities; + else if (cpu_is_davinci_dm646x()) + davinci_def_priorities = dm646x_default_priorities; + else if (cpu_is_davinci_dm355()) + davinci_def_priorities = dm355_default_priorities; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); @@ -209,8 +351,8 @@ void __init davinci_irq_init(void) unsigned j; u32 pri; - for (j = 0, pri = 0; j < 32; j += 4, priority++) - pri |= (*priority & 0x07) << j; + for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++) + pri |= (*davinci_def_priorities & 0x07) << j; davinci_irq_writel(pri, i); } diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index 8ff9d8aca60b..bbba0b247a44 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -1,41 +1,103 @@ /* - * DaVinci pin multiplexing configurations + * Utility to set the DAVINCI MUX register from a table in mux.h * * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> * + * Based on linux/arch/arm/plat-omap/mux.c: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ #include <linux/io.h> +#include <linux/module.h> #include <linux/spinlock.h> #include <mach/hardware.h> - #include <mach/mux.h> -/* System control register offsets */ -#define PINMUX0 0x00 -#define PINMUX1 0x04 +static const struct mux_config *mux_table; +static unsigned long pin_table_sz; + +int __init davinci_mux_register(const struct mux_config *pins, + unsigned long size) +{ + mux_table = pins; + pin_table_sz = size; -static DEFINE_SPINLOCK(mux_lock); + return 0; +} -void davinci_mux_peripheral(unsigned int mux, unsigned int enable) +/* + * Sets the DAVINCI MUX register based on the table + */ +int __init_or_module davinci_cfg_reg(const unsigned long index) { - u32 pinmux, muxreg = PINMUX0; + static DEFINE_SPINLOCK(mux_spin_lock); + void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); + unsigned long flags; + const struct mux_config *cfg; + unsigned int reg_orig = 0, reg = 0; + unsigned int mask, warn = 0; + + if (!mux_table) + BUG(); + + if (index >= pin_table_sz) { + printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", + index, pin_table_sz); + dump_stack(); + return -ENODEV; + } + + cfg = &mux_table[index]; + + if (cfg->name == NULL) { + printk(KERN_ERR "No entry for the specified index\n"); + return -ENODEV; + } + + /* Update the mux register in question */ + if (cfg->mask) { + unsigned tmp1, tmp2; + + spin_lock_irqsave(&mux_spin_lock, flags); + reg_orig = __raw_readl(base + cfg->mux_reg); + + mask = (cfg->mask << cfg->mask_offset); + tmp1 = reg_orig & mask; + reg = reg_orig & ~mask; + + tmp2 = (cfg->mode << cfg->mask_offset); + reg |= tmp2; + + if (tmp1 != tmp2) + warn = 1; + + __raw_writel(reg, base + cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + } + + if (warn) { +#ifdef CONFIG_DAVINCI_MUX_WARNINGS + printk(KERN_WARNING "MUX: initialized %s\n", cfg->name); +#endif + } - if (mux >= DAVINCI_MUX_LEVEL2) { - muxreg = PINMUX1; - mux -= DAVINCI_MUX_LEVEL2; +#ifdef CONFIG_DAVINCI_MUX_DEBUG + if (cfg->debug || warn) { + printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name); + printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n", + cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg); } +#endif - spin_lock(&mux_lock); - pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg); - if (enable) - pinmux |= (1 << mux); - else - pinmux &= ~(1 << mux); - davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg); - spin_unlock(&mux_lock); + return 0; } +EXPORT_SYMBOL(davinci_cfg_reg); diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h new file mode 100644 index 000000000000..adc869413371 --- /dev/null +++ b/arch/arm/mach-davinci/mux.h @@ -0,0 +1,51 @@ +/* + * Pin-multiplex helper macros for TI DaVinci family devices + * + * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright (C) 2008 Texas Instruments. + */ +#ifndef _MACH_DAVINCI_MUX_H_ +#define _MACH_DAVINCI_MUX_H_ + +#include <mach/mux.h> + +#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "PINMUX"#muxreg, \ + .mux_reg = PINMUX##muxreg, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "INTMUX", \ + .mux_reg = INTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "EVTMUX", \ + .mux_reg = EVTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#endif /* _MACH_DAVINCI_MUX_H */ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 58754f066d5b..84171abf5f7b 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -23,10 +23,13 @@ #include <linux/init.h> #include <linux/io.h> +#include <mach/cputype.h> #include <mach/hardware.h> #include <mach/psc.h> #include <mach/mux.h> +#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 + /* PSC register offsets */ #define EPCPR 0x070 #define PTCMD 0x120 @@ -36,102 +39,61 @@ #define MDSTAT 0x800 #define MDCTL 0xA00 -/* System control register offsets */ -#define VDD3P3V_PWDN 0x48 +#define MDSTAT_STATE_MASK 0x1f -static void davinci_psc_mux(unsigned int id) +/* Return nonzero iff the domain's clock is active */ +int __init davinci_psc_is_clk_active(unsigned int id) { - switch (id) { - case DAVINCI_LPSC_ATA: - davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1); - davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1); - break; - case DAVINCI_LPSC_MMC_SD: - /* VDD power manupulations are done in U-Boot for CPMAC - * so applies to MMC as well - */ - /*Set up the pull regiter for MMC */ - davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN); - davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0); - break; - case DAVINCI_LPSC_I2C: - davinci_mux_peripheral(DAVINCI_MUX_I2C, 1); - break; - case DAVINCI_LPSC_McBSP: - davinci_mux_peripheral(DAVINCI_MUX_ASP, 1); - break; - default: - break; - } + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + + /* if clocked, state can be "Enable" or "SyncReset" */ + return mdstat & BIT(12); } /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */ - mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); - if (enable) - mdctl |= 0x00000003; /* Enable Module */ - else - mdctl &= 0xFFFFFFF2; /* Disable Module */ - davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); + mdctl &= ~MDSTAT_STATE_MASK; + mdctl |= next_state; + __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT); + pdstat = __raw_readl(psc_base + PDSTAT); if ((pdstat & 0x00000001) == 0) { - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x1; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - EPCPR); + epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x100; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } else { ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - PTSTAT); + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } - if (enable) - mdstat_mask = 0x3; - else - mdstat_mask = 0x2; - do { - mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - MDSTAT + 4 * id); - } while (!((mdstat & 0x0000001F) == mdstat_mask)); - - if (enable) - davinci_psc_mux(id); -} - -void __init davinci_psc_init(void) -{ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1); - - /* Turn on WatchDog timer LPSC. Needed for RESET to work */ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1); + mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + } while (!((mdstat & MDSTAT_STATE_MASK) == next_state)); } diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 3010f9971255..695075796522 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -32,32 +32,47 @@ #include <mach/hardware.h> #include <mach/serial.h> #include <mach/irqs.h> +#include <mach/cputype.h> +#include "clock.h" -#define UART_DAVINCI_PWREMU 0x0c - -static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up, - int offset) +static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, + int offset) { offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); + return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset); } -static inline void davinci_serial_outp(struct plat_serial8250_port *p, - int offset, int value) +static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, + int value) { offset <<= p->regshift; - __raw_writeb(value, p->membase + offset); + __raw_writel(value, IO_ADDRESS(p->mapbase) + offset); } static struct plat_serial8250_port serial_platform_data[] = { { - .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE), - .mapbase = (unsigned long)DAVINCI_UART0_BASE, + .mapbase = DAVINCI_UART0_BASE, .irq = IRQ_UARTINT0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = 27000000, }, { .flags = 0 @@ -74,22 +89,68 @@ static struct platform_device serial_device = { static void __init davinci_serial_reset(struct plat_serial8250_port *p) { - /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ unsigned int pwremu = 0; - davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */ + serial_write_reg(p, UART_IER, 0); /* disable all interrupts */ - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); mdelay(10); pwremu |= (0x3 << 13); pwremu |= 0x1; - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); + + if (cpu_is_davinci_dm646x()) + serial_write_reg(p, UART_DM646X_SCR, + UART_DM646X_SCR_TX_WATERMARK); +} + +void __init davinci_serial_init(struct davinci_uart_config *info) +{ + int i; + char name[16]; + struct clk *uart_clk; + struct device *dev = &serial_device.dev; + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) { + struct plat_serial8250_port *p = serial_platform_data + i; + + if (!(info->enabled_uarts & (1 << i))) { + p->flags = 0; + continue; + } + + if (cpu_is_davinci_dm646x()) + p->iotype = UPIO_MEM32; + + if (cpu_is_davinci_dm355()) { + if (i == 2) { + p->mapbase = (unsigned long)DM355_UART2_BASE; + p->irq = IRQ_DM355_UARTINT2; + } + } + + sprintf(name, "uart%d", i); + uart_clk = clk_get(dev, name); + if (IS_ERR(uart_clk)) + printk(KERN_ERR "%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, i); + else { + clk_enable(uart_clk); + p->uartclk = clk_get_rate(uart_clk); + davinci_serial_reset(p); + } + } } static int __init davinci_init(void) { - davinci_serial_reset(&serial_platform_data[0]); return platform_device_register(&serial_device); } diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 6c227d4ba998..494e01bff5c3 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -16,6 +16,9 @@ #include <linux/clockchips.h> #include <linux/spinlock.h> #include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/device.h> #include <mach/hardware.h> #include <asm/system.h> @@ -24,8 +27,11 @@ #include <asm/mach/time.h> #include <asm/errno.h> #include <mach/io.h> +#include <mach/cputype.h> +#include "clock.h" static struct clock_event_device clockevent_davinci; +static unsigned int davinci_clock_tick_rate; #define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) #define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) @@ -99,9 +105,9 @@ struct timer_s { unsigned int id; unsigned long period; unsigned long opts; - unsigned long reg_base; - unsigned long tim_reg; - unsigned long prd_reg; + void __iomem *base; + unsigned long tim_off; + unsigned long prd_off; unsigned long enamode_shift; struct irqaction irqaction; }; @@ -114,15 +120,15 @@ static struct timer_s timers[]; static int timer32_config(struct timer_s *t) { - u32 tcr = davinci_readl(t->reg_base + TCR); + u32 tcr = __raw_readl(t->base + TCR); /* disable timer */ tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); /* reset counter to zero, set new period */ - davinci_writel(0, t->tim_reg); - davinci_writel(t->period, t->prd_reg); + __raw_writel(0, t->base + t->tim_off); + __raw_writel(t->period, t->base + t->prd_off); /* Set enable mode */ if (t->opts & TIMER_OPTS_ONESHOT) { @@ -131,13 +137,13 @@ static int timer32_config(struct timer_s *t) tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; } - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); return 0; } static inline u32 timer32_read(struct timer_s *t) { - return davinci_readl(t->tim_reg); + return __raw_readl(t->base + t->tim_off); } static irqreturn_t timer_interrupt(int irq, void *dev_id) @@ -176,51 +182,54 @@ static struct timer_s timers[] = { static void __init timer_init(void) { - u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; + u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; int i; /* Global init of each 64-bit timer as a whole */ for(i=0; i<2; i++) { - u32 tgcr, base = bases[i]; + u32 tgcr; + void __iomem *base = IO_ADDRESS(phys_bases[i]); /* Disabled, Internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset both timers, no pre-scaler for timer34 */ tgcr = 0; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Set both timers to unchained 32-bit */ tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Unreset timers */ tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Init both counters to zero */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); } /* Init of each timer as a 32-bit timer */ for (i=0; i< ARRAY_SIZE(timers); i++) { struct timer_s *t = &timers[i]; + u32 phys_base; if (t->name) { t->id = i; - t->reg_base = (IS_TIMER1(t->id) ? + phys_base = (IS_TIMER1(t->id) ? DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE); + t->base = IO_ADDRESS(phys_base); if (IS_TIMER_BOT(t->id)) { t->enamode_shift = 6; - t->tim_reg = t->reg_base + TIM12; - t->prd_reg = t->reg_base + PRD12; + t->tim_off = TIM12; + t->prd_off = PRD12; } else { t->enamode_shift = 22; - t->tim_reg = t->reg_base + TIM34; - t->prd_reg = t->reg_base + PRD34; + t->tim_off = TIM34; + t->prd_off = PRD34; } /* Register interrupt */ @@ -274,7 +283,7 @@ static void davinci_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - t->period = CLOCK_TICK_RATE / (HZ); + t->period = davinci_clock_tick_rate / (HZ); t->opts = TIMER_OPTS_PERIODIC; timer32_config(t); break; @@ -301,21 +310,29 @@ static struct clock_event_device clockevent_davinci = { static void __init davinci_timer_init(void) { + struct clk *timer_clk; + static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; /* init timer hw */ timer_init(); + timer_clk = clk_get(NULL, "timer0"); + BUG_ON(IS_ERR(timer_clk)); + clk_enable(timer_clk); + + davinci_clock_tick_rate = clk_get_rate(timer_clk); + /* setup clocksource */ clocksource_davinci.mult = - clocksource_khz2mult(CLOCK_TICK_RATE/1000, + clocksource_khz2mult(davinci_clock_tick_rate/1000, clocksource_davinci.shift); if (clocksource_register(&clocksource_davinci)) printk(err, clocksource_davinci.name); /* setup clockevent */ - clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, + clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, clockevent_davinci.shift); clockevent_davinci.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_davinci); @@ -333,42 +350,52 @@ struct sys_timer davinci_timer = { /* reset board using watchdog timer */ void davinci_watchdog_reset(void) { - u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE; + u32 tgcr, wdtcr; + void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); + struct device dev; + struct clk *wd_clk; + char *name = "watchdog"; + + dev_set_name(&dev, name); + wd_clk = clk_get(&dev, NULL); + if (WARN_ON(IS_ERR(wd_clk))) + return; + clk_enable(wd_clk); /* disable, internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset timer, set mode to 64-bit watchdog, and unreset */ tgcr = 0; - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT; tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); /* clear counter and period regs */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); - davinci_writel(0, base + PRD12); - davinci_writel(0, base + PRD34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); + __raw_writel(0, base + PRD12); + __raw_writel(0, base + PRD34); /* enable */ - wdtcr = davinci_readl(base + WDTCR); + wdtcr = __raw_readl(base + WDTCR); wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in pre-active state */ wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in active state */ wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* write an invalid value to the WDKEY field to trigger * a watchdog reset */ wdtcr = 0x00004000; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); } diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 2429b79f6da2..abedb6337182 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -14,6 +14,8 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#define DAVINCI_USB_OTG_BASE 0x01C64000 + #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct musb_hdrc_eps_bits musb_eps[] = { { "ep1_tx", 8, }, diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index 44d4a966bed9..46098f546824 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -26,19 +26,13 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } static int mmc_late_init(struct device *dev) { - int ret; - - ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); + int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); if (ret < 0) return ret; @@ -47,7 +41,7 @@ static int mmc_late_init(struct device *dev) return ret; } -static void mmc_shutdown(struct device *dev) +static void mmc_cleanup(struct device *dev) { gpio_free(H2_TPS_GPIO_MMC_PWR_EN); } @@ -60,7 +54,7 @@ static void mmc_shutdown(struct device *dev) static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, .init = mmc_late_init, - .shutdown = mmc_shutdown, + .cleanup = mmc_cleanup, .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 0d8a3c195e2e..5e8877ce35e0 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -26,11 +26,7 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4695965114c4..f597968733b4 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -39,12 +39,10 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/gpioexpander.h> #include <mach/irqs.h> #include <mach/mux.h> #include <mach/tc.h> #include <mach/nand.h> -#include <mach/irda.h> #include <mach/usb.h> #include <mach/keypad.h> #include <mach/dma.h> @@ -276,104 +274,6 @@ static struct platform_device h3_kp_device = { .resource = h3_kp_resources, }; - -/* Select between the IrDA and aGPS module - */ -static int h3_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x26))) { - printk(KERN_ERR "Error reading from I/O EXPANDER \n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDA */ - if ((err = write_gpio_expa(expa | 0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x27)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x03; - - if (mode & IR_SIRMODE) { - expa |= 0x01; - } else { /* MIR/FIR */ - expa |= 0x03; - } - - if ((err = write_gpio_expa(expa, 0x27)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h3_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h3_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h3_transceiver_mode, - .select_irda = h3_select_irda, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource h3_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 irda_dmamask = 0xffffffff; - -static struct platform_device h3_irda_device = { - .name = "omapirda", - .id = 0, - .dev = { - .platform_data = &h3_irda_data, - .dma_mask = &irda_dmamask, - }, - .num_resources = ARRAY_SIZE(h3_irda_resources), - .resource = h3_irda_resources, -}; - static struct platform_device h3_lcd_device = { .name = "lcd_h3", .id = -1, @@ -395,7 +295,6 @@ static struct platform_device *devices[] __initdata = { &nand_device, &smc91x_device, &intlat_device, - &h3_irda_device, &h3_kp_device, &h3_lcd_device, }; diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7bc7a3cb9c51..d1ed1365319e 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -181,11 +181,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = { static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1); - else - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0); - + gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on); return 0; } diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index d040c3f1027f..a2d7814896be 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -40,8 +40,8 @@ static void omap1_mcbsp_request(unsigned int id) */ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { if (dsp_use++ == 0) { - api_clk = clk_get(NULL, "api_clk"); - dsp_clk = clk_get(NULL, "dsp_clk"); + api_clk = clk_get(NULL, "api_ck"); + dsp_clk = clk_get(NULL, "dsp_ck"); if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { clk_enable(api_clk); clk_enable(dsp_clk); diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index a0267a9ab466..e7d017cdc438 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -33,10 +33,8 @@ #include <mach/control.h> #include <mach/gpio.h> -#include <mach/gpioexpander.h> #include <mach/mux.h> #include <mach/usb.h> -#include <mach/irda.h> #include <mach/board.h> #include <mach/common.h> #include <mach/keypad.h> @@ -138,98 +136,6 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -/* Select between the IrDA and aGPS module - */ -static int h4_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x21))) { - printk(KERN_ERR "Error reading from I/O expander\n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDa */ - if ((err = write_gpio_expa(expa | 0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x20)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x01; - - if (!(mode & IR_SIRMODE)) { /* MIR/FIR */ - expa |= 0x01; - } - - if ((err = write_gpio_expa(expa, 0x20)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h4_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h4_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h4_transceiver_mode, - .select_irda = h4_select_irda, - .rx_channel = OMAP24XX_DMA_UART3_RX, - .tx_channel = OMAP24XX_DMA_UART3_TX, - .dest_start = OMAP_UART3_BASE, - .src_start = OMAP_UART3_BASE, - .tx_trigger = OMAP24XX_DMA_UART3_TX, - .rx_trigger = OMAP24XX_DMA_UART3_RX, -}; - -static struct resource h4_irda_resources[] = { - [0] = { - .start = INT_24XX_UART3_IRQ, - .end = INT_24XX_UART3_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h4_irda_device = { - .name = "omapirda", - .id = -1, - .dev = { - .platform_data = &h4_irda_data, - }, - .num_resources = 1, - .resource = h4_irda_resources, -}; - static struct omap_kp_platform_data h4_kp_data = { .rows = 6, .cols = 7, @@ -255,7 +161,6 @@ static struct platform_device h4_lcd_device = { static struct platform_device *h4_devices[] __initdata = { &h4_flash_device, - &h4_irda_device, &h4_kp_device, &h4_lcd_device, }; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 744740ae1b9c..3a7a29d1f9a7 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -42,6 +42,7 @@ #include <mach/nand.h> #include <mach/mux.h> #include <mach/usb.h> +#include <mach/timer-gp.h> #include "mmc-twl4030.h" @@ -186,6 +187,9 @@ static void __init omap3_beagle_init_irq(void) { omap2_init_common_hw(NULL); omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 3a0daac6c839..374ff63c3eb2 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -15,7 +15,6 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/delay.h> #include <linux/gpio.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 1e839c5a28c5..efc59c49341b 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -60,12 +60,13 @@ struct omap_clk { }, \ } -#define CK_243X (1 << 0) -#define CK_242X (1 << 1) +#define CK_243X RATE_IN_243X +#define CK_242X RATE_IN_242X static struct omap_clk omap24xx_clks[] = { /* external root sources */ CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), @@ -711,7 +712,7 @@ int __init omap2_clk_init(void) { struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate, cpu_mask; + u32 clkrate; if (cpu_is_omap242x()) cpu_mask = RATE_IN_242X; @@ -720,21 +721,15 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_init_one(c->lk.clk); + osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); propagate_rate(&osc_ck); sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); propagate_rate(&sys_ck); for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_init_one(c->lk.clk); - - cpu_mask = 0; - if (cpu_is_omap2420()) - cpu_mask |= CK_242X; - if (cpu_is_omap2430()) - cpu_mask |= CK_243X; - - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) if (c->cpu & cpu_mask) { clkdev_add(&c->lk); clk_register(c->lk.clk); diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 33c3e5b14323..88c5acb40fcf 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -625,6 +625,14 @@ static struct clk func_32k_ck = { .clkdm_name = "wkup_clkdm", }; +static struct clk secure_32k_ck = { + .name = "secure_32k_ck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, + .clkdm_name = "wkup_clkdm", +}; + /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", @@ -1790,7 +1798,7 @@ static struct clk gpt12_ick = { static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_omap2_dflt_wait, - .parent = &func_32k_ck, + .parent = &secure_32k_ck, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 70ec10deb654..6763b8f73028 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2052,7 +2052,7 @@ static struct clk dss_ick = { static struct clk cam_mclk = { .name = "cam_mclk", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll4_m5x2_ck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, @@ -2063,7 +2063,7 @@ static struct clk cam_mclk = { static struct clk cam_ick = { /* Handles both L3 and L4 clocks */ .name = "cam_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), @@ -2074,7 +2074,7 @@ static struct clk cam_ick = { static struct clk csi2_96m_fck = { .name = "csi2_96m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &core_96m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), @@ -2901,7 +2901,6 @@ static struct clk sr_l4_ick = { /* SECURE_32K_FCK clocks */ -/* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index d6b4b2f8722f..496983ade97e 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -25,7 +25,6 @@ #include <mach/board.h> #include <mach/mux.h> #include <mach/gpio.h> -#include <mach/eac.h> #include <mach/mmc.h> #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) @@ -366,38 +365,6 @@ static void omap_init_mcspi(void) static inline void omap_init_mcspi(void) {} #endif -#ifdef CONFIG_SND_OMAP24XX_EAC - -#define OMAP2_EAC_BASE 0x48090000 - -static struct resource omap2_eac_resources[] = { - { - .start = OMAP2_EAC_BASE, - .end = OMAP2_EAC_BASE + 0x109, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap2_eac_device = { - .name = "omap24xx-eac", - .id = -1, - .num_resources = ARRAY_SIZE(omap2_eac_resources), - .resource = omap2_eac_resources, - .dev = { - .platform_data = NULL, - }, -}; - -void omap_init_eac(struct eac_platform_data *pdata) -{ - omap2_eac_device.dev.platform_data = pdata; - platform_device_register(&omap2_eac_device); -} - -#else -void omap_init_eac(struct eac_platform_data *pdata) {} -#endif - #ifdef CONFIG_OMAP_SHA1_MD5 static struct resource sha1_md5_resources[] = { { diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 9ba20d985dda..998c5c45587e 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -73,9 +73,9 @@ static int omap_check_spurious(unsigned int irq) u32 sir, spurious; sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR); - spurious = sir >> 6; + spurious = sir >> 7; - if (spurious > 1) { + if (spurious) { printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush " "posted write for irq %i\n", irq, sir, previous_irq); diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 1cb2c0909c2b..f36aba12090e 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -3,6 +3,8 @@ * * OMAP2 GP timer support. * + * Copyright (C) 2009 Nokia Corporation + * * Update to use new clocksource/clockevent layers * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> * Copyright (C) 2007 MontaVista Software, Inc. @@ -36,8 +38,13 @@ #include <asm/mach/time.h> #include <mach/dmtimer.h> +/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ +#define MAX_GPTIMER_ID 12 + static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; +static u8 __initdata gptimer_id = 1; +static u8 __initdata inited; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { @@ -95,20 +102,53 @@ static struct clock_event_device clockevent_gpt = { .set_mode = omap2_gp_timer_set_mode, }; +/** + * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents + * @id: GPTIMER to use (1..MAX_GPTIMER_ID) + * + * Define the GPTIMER that the system should use for the tick timer. + * Meant to be called from board-*.c files in the event that GPTIMER1, the + * default, is unsuitable. Returns -EINVAL on error or 0 on success. + */ +int __init omap2_gp_clockevent_set_gptimer(u8 id) +{ + if (id < 1 || id > MAX_GPTIMER_ID) + return -EINVAL; + + BUG_ON(inited); + + gptimer_id = id; + + return 0; +} + static void __init omap2_gp_clockevent_init(void) { u32 tick_rate; + int src; + + inited = 1; - gptimer = omap_dm_timer_request_specific(1); + gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); #if defined(CONFIG_OMAP_32K_TIMER) - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); + src = OMAP_TIMER_SRC_32_KHZ; #else - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK); + src = OMAP_TIMER_SRC_SYS_CLK; + WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the " + "secure 32KiHz clock source\n"); #endif + + if (gptimer_id != 12) + WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)), + "timer-gp: omap_dm_timer_set_source() failed\n"); + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", + gptimer_id, tick_rate); + omap2_gp_timer_irq.dev_id = (void *)gptimer; setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); @@ -125,6 +165,8 @@ static void __init omap2_gp_clockevent_init(void) clockevents_register_device(&clockevent_gpt); } +/* Clocksource code */ + #ifdef CONFIG_OMAP_32K_TIMER /* * When 32k-timer is enabled, don't use GPTimer for clocksource diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 15e509013def..8df55f40f4c0 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk) unsigned sysclk_ps; int status; - if (!refclk_psec) + if (!refclk_psec || sysclk_ps == 0) return -ENODEV; sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3e66d9099eab..17d3fbd368a3 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -289,12 +289,12 @@ config MACH_LITTLETON config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index cdf21dd135b4..930e364ccde9 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_spi_info = { .num_chipselect = 3, }; +static void corgi_wait_for_hsync(void) +{ + while (gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data corgi_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = CORGI_GPIO_TP_INT, + .wait_for_sync = corgi_wait_for_hsync, }; static void corgi_ads7846_cs(u32 command) diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index e13f6a81c223..c872b9feb4d4 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -334,6 +334,11 @@ static struct led_info littleton_da9034_leds[] = { }, }; +static struct da9034_touch_pdata littleton_da9034_touch = { + .x_inverted = 1, + .interval_ms = 20, +}; + static struct da903x_subdev_info littleton_da9034_subdevs[] = { { .name = "da903x-led", @@ -350,6 +355,10 @@ static struct da903x_subdev_info littleton_da9034_subdevs[] = { }, { .name = "da903x-backlight", .id = DA9034_ID_WLED, + }, { + .name = "da9034-touch", + .id = DA9034_ID_TOUCH, + .platform_data = &littleton_da9034_touch, }, }; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 8c61ddac119e..c18e34acafcb 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_spi_info = { .num_chipselect = 3, }; +static void spitz_wait_for_hsync(void) +{ + while (gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data spitz_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = SPITZ_GPIO_TP_INT, + .wait_for_sync = spitz_wait_for_hsync, }; static void spitz_ads7846_cs(u32 command) diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index c1f73205d078..c256c57642c0 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO25_AC97_SDATA_IN_0, GPIO27_AC97_SDATA_OUT, GPIO28_AC97_SYNC, + GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO91_SSP3_SCLK, @@ -126,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, + + /* GPIO */ + GPIO18_GPIO, /* GPIO Expander #0 INT_N */ + GPIO19_GPIO, /* GPIO Expander #1 INT_N */ }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 4e1c488c6906..cc5a22833605 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO38_AC97_SYNC, GPIO39_AC97_BITCLK, GPIO40_AC97_nACRESET, + GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO89_SSP3_SCLK, diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index c9cfe40e21f6..a7417c479ffe 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <asm/cacheflush.h> #include <asm/irq.h> #include <mach/regs-power.h> @@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void) { unsigned long tmp; + flush_cache_all(); + /* set our standby method to sleep */ tmp = __raw_readl(S3C2412_PWRCFG); diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index baf1c0f1ea5a..8199972ed5bd 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -40,6 +40,8 @@ #define S3C64XX_PA_FB (0x77100000) #define S3C64XX_PA_SYSCON (0x7E00F000) +#define S3C64XX_PA_IIS0 (0x7F002000) +#define S3C64XX_PA_IIS1 (0x7F003000) #define S3C64XX_PA_TIMER (0x7F006000) #define S3C64XX_PA_IIC0 (0x7F004000) #define S3C64XX_PA_IIC1 (0x7F00F000) diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 0cd52692d2f7..1f940df0e5af 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -9,6 +9,7 @@ #include <mach/hardware.h> #include <asm/setup.h> #include <asm/mach-types.h> +#include <asm/page.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 2c6c2a7c05a0..8f5c13f4c936 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -20,6 +20,31 @@ #define D_CACHE_LINE_SIZE 32 #define BTB_FLUSH_SIZE 8 +#ifdef CONFIG_ARM_ERRATA_411920 +/* + * Invalidate the entire I cache (this code is a workaround for the ARM1136 + * erratum 411920 - Invalidate Instruction Cache operation can fail. This + * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore. + * + * Registers: + * r0 - set to 0 + * r1 - corrupted + */ +ENTRY(v6_icache_inval_all) + mov r0, #0 + mrs r1, cpsr + cpsid ifa @ disable interrupts + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + msr cpsr_cx, r1 @ restore interrupts + .rept 11 @ ARM Ltd recommends at least + nop @ 11 NOPs + .endr + mov pc, lr +#endif + /* * v6_flush_cache_all() * @@ -31,8 +56,12 @@ ENTRY(v6_flush_kern_cache_all) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else + b v6_icache_inval_all +#endif +#else mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate #endif mov pc, lr @@ -103,8 +132,12 @@ ENTRY(v6_coherent_user_range) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c10, 4 @ drain write buffer +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else + b v6_icache_inval_all +#endif +#else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB #endif mov pc, lr diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 4e283481cee1..c07222eb5ce0 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -18,6 +18,10 @@ #include "mm.h" +#ifdef CONFIG_ARM_ERRATA_411920 +extern void v6_icache_inval_all(void); +#endif + #ifdef CONFIG_CPU_CACHE_VIPT #define ALIAS_FLUSH_START 0xffff4000 @@ -32,10 +36,15 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) asm( "mcrr p15, 0, %1, %0, c14\n" " mcr p15, 0, %2, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %2, c7, c5, 0\n" +#endif : : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } void flush_cache_mm(struct mm_struct *mm) @@ -48,11 +57,16 @@ void flush_cache_mm(struct mm_struct *mm) if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } @@ -67,11 +81,16 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index c221e26ac1d3..3397f1e64d76 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -96,6 +96,9 @@ ENTRY(cpu_v7_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id orr r0, r0, #TTB_FLAGS +#ifdef CONFIG_ARM_ERRATA_430973 + mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB +#endif mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID isb 1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -181,6 +184,22 @@ __v7_setup: stmia r12, {r0-r5, r7, r9, r11, lr} bl v7_flush_dcache_all ldmia r12, {r0-r5, r7, r9, r11, lr} +#ifdef CONFIG_ARM_ERRATA_430973 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 6) @ set IBE to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_458693 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 5) @ set L1NEON to 1 + orr r10, r10, #(1 << 9) @ set PLDNOP to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_460075 + mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register + orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit + mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register +#endif mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index e364a5ed10f1..77646436c00e 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name) local_irq_restore(flags); return -EBUSY; } + memset(imxdma, 0, sizeof(imxdma)); + imxdma->name = name; + local_irq_restore(flags); /* request_irq() can block */ #ifdef CONFIG_ARCH_MX2 ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", NULL); if (ret) { - local_irq_restore(flags); + imxdma->name = NULL; printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n", MXC_INT_DMACH0 + channel, channel); return ret; @@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name) imxdma->watchdog.data = channel; #endif - imxdma->name = name; - imxdma->irq_handler = NULL; - imxdma->err_handler = NULL; - imxdma->data = NULL; - imxdma->sg = NULL; - - local_irq_restore(flags); return ret; } EXPORT_SYMBOL(imx_dma_request); @@ -737,10 +733,7 @@ void imx_dma_free(int channel) local_irq_save(flags); /* Disable interrupts */ - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN, - DMA_BASE + DMA_CCR(channel)); + imx_dma_disable(channel); imxdma->name = NULL; #ifdef CONFIG_ARCH_MX2 diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index c6483bad8a26..89e95798cc3b 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -124,7 +124,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) irq_stat = __raw_readl(port->base + GPIO_ISR) & __raw_readl(port->base + GPIO_IMR); - BUG_ON(!irq_stat); + mxc_gpio_irq_handler(port, irq_stat); } #endif diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h index 1cac9d1135cd..d42f4e6116f8 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h @@ -47,7 +47,7 @@ /* * Base address of PBC controller, CS4 */ -#define PBC_BASE_ADDRESS 0xEB000000 +#define PBC_BASE_ADDRESS 0xf4300000 #define PBC_REG_ADDR(offset) (void __force __iomem *) \ (PBC_BASE_ADDRESS + (offset)) diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 2e0614552ac8..29efc279287a 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -239,6 +239,13 @@ void recalculate_root_clocks(void) } } +/** + * clk_init_one - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ void clk_init_one(struct clk *clk) { INIT_LIST_HEAD(&clk->children); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 21cc0142b97a..7fc8c045ad5d 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -760,19 +760,12 @@ void omap_free_dma(int lch) { unsigned long flags; - spin_lock_irqsave(&dma_chan_lock, flags); if (dma_chan[lch].dev_id == -1) { pr_err("omap_dma: trying to free unallocated DMA channel %d\n", lch); - spin_unlock_irqrestore(&dma_chan_lock, flags); return; } - dma_chan[lch].dev_id = -1; - dma_chan[lch].next_lch = -1; - dma_chan[lch].callback = NULL; - spin_unlock_irqrestore(&dma_chan_lock, flags); - if (cpu_class_is_omap1()) { /* Disable all DMA interrupts for the channel. */ dma_write(0, CICR(lch)); @@ -798,6 +791,12 @@ void omap_free_dma(int lch) dma_write(0, CCR(lch)); omap_clear_dma(lch); } + + spin_lock_irqsave(&dma_chan_lock, flags); + dma_chan[lch].dev_id = -1; + dma_chan[lch].next_lch = -1; + dma_chan[lch].callback = NULL; + spin_unlock_irqrestore(&dma_chan_lock, flags); } EXPORT_SYMBOL(omap_free_dma); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index bfd47570cc91..55bb99631292 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -238,7 +238,7 @@ static struct omap_dm_timer omap3_dm_timers[] = { { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 }, { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 }, { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 }, - { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 }, + { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ }, }; static const char *omap3_dm_source_names[] __initdata = { @@ -321,11 +321,9 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ /* - * Enable wake-up only for GPT1 on OMAP2 CPUs. - * FIXME: All timers should have wake-up enabled and clear - * PRCM status. + * Enable wake-up on OMAP2 CPUs. */ - if (cpu_class_is_omap2() && (timer == &dm_timers[0])) + if (cpu_class_is_omap2()) l |= 1 << 2; omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l); @@ -511,7 +509,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop); #ifdef CONFIG_ARCH_OMAP1 -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int n = (timer - dm_timers) << 1; u32 l; @@ -519,23 +517,31 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; omap_writel(l, MOD_CONF_CTRL_1); + + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); #else -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { + int ret = -EINVAL; + if (source < 0 || source >= 3) - return; + return -EINVAL; clk_disable(timer->fclk); - clk_set_parent(timer->fclk, dm_source_clocks[source]); + ret = clk_set_parent(timer->fclk, dm_source_clocks[source]); clk_enable(timer->fclk); - /* When the functional clock disappears, too quick writes seem to - * cause an abort. */ + /* + * When the functional clock disappears, too quick writes seem + * to cause an abort. XXX Is this still necessary? + */ __delay(150000); + + return ret; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d3fa41e3d8c5..17d7afe42b83 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -758,8 +758,12 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) /* Workaround for clearing DSP GPIO interrupts to allow retention */ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; if (cpu_is_omap24xx() || cpu_is_omap34xx()) - __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2); + __raw_writel(gpio_mask, reg); + + /* Flush posted write for the irq status to avoid spurious interrupts */ + __raw_readl(reg); #endif } @@ -921,13 +925,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) case METHOD_MPUIO: case METHOD_GPIO_1610: spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif @@ -940,13 +941,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) return -EINVAL; } spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h index 6dc703138210..20f1054c0a80 100644 --- a/arch/arm/plat-omap/include/mach/dmtimer.h +++ b/arch/arm/plat-omap/include/mach/dmtimer.h @@ -64,7 +64,7 @@ void omap_dm_timer_trigger(struct omap_dm_timer *timer); void omap_dm_timer_start(struct omap_dm_timer *timer); void omap_dm_timer_stop(struct omap_dm_timer *timer); -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h deleted file mode 100644 index 9e62cf030270..000000000000 --- a/arch/arm/plat-omap/include/mach/eac.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach2/eac.h - * - * Defines for Enhanced Audio Controller - * - * Contact: Jarkko Nikula <jarkko.nikula@nokia.com> - * - * Copyright (C) 2006 Nokia Corporation - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H -#define __ASM_ARM_ARCH_OMAP2_EAC_H - -#include <mach/io.h> -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <sound/core.h> - -/* master codec clock source */ -#define EAC_MCLK_EXT_MASK 0x100 -enum eac_mclk_src { - EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */ - EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK, - EAC_MCLK_EXT_12288000, - EAC_MCLK_EXT_2x11289600, - EAC_MCLK_EXT_2x12288000, -}; - -/* codec port interface mode */ -enum eac_codec_mode { - EAC_CODEC_PCM, - EAC_CODEC_AC97, - EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */ - EAC_CODEC_I2S_SLAVE, -}; - -/* configuration structure for I2S mode */ -struct eac_i2s_conf { - /* if enabled, then first data slot (left channel) is signaled as - * positive level of frame sync EAC.AC_FS */ - unsigned polarity_changed_mode:1; - /* if enabled, then serial data starts one clock cycle after the - * of EAC.AC_FS for first audio slot */ - unsigned sync_delay_enable:1; -}; - -/* configuration structure for EAC codec port */ -struct eac_codec { - enum eac_mclk_src mclk_src; - - enum eac_codec_mode codec_mode; - union { - struct eac_i2s_conf i2s; - } codec_conf; - - int default_rate; /* audio sampling rate */ - - int (* set_power)(void *private_data, int dac, int adc); - int (* register_controls)(void *private_data, - struct snd_card *card); - const char *short_name; - - void *private_data; -}; - -/* structure for passing platform dependent data to the EAC driver */ -struct eac_platform_data { - int (* init)(struct device *eac_dev); - void (* cleanup)(struct device *eac_dev); - /* these callbacks are used to configure & control external MCLK - * source. NULL if not used */ - int (* enable_ext_clocks)(struct device *eac_dev); - void (* disable_ext_clocks)(struct device *eac_dev); -}; - -extern void omap_init_eac(struct eac_platform_data *pdata); - -extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec); -extern void eac_unregister_codec(struct device *eac_dev); - -extern int eac_set_mode(struct device *eac_dev, int play, int rec); - -#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */ diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h deleted file mode 100644 index 90444a0d6b1a..000000000000 --- a/arch/arm/plat-omap/include/mach/gpioexpander.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpioexpander.h - * - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H -#define __ASM_ARCH_OMAP_GPIOEXPANDER_H - -/* Function Prototypes for GPIO Expander functions */ - -#ifdef CONFIG_GPIOEXPANDER_OMAP -int read_gpio_expa(u8 *, int); -int write_gpio_expa(u8 , int); -#else -static inline int read_gpio_expa(u8 *val, int addr) -{ - return 0; -} -static inline int write_gpio_expa(u8 val, int addr) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */ diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h index 8372a00d8e0b..40f60339d1c6 100644 --- a/arch/arm/plat-omap/include/mach/irda.h +++ b/arch/arm/plat-omap/include/mach/irda.h @@ -21,10 +21,6 @@ struct omap_irda_config { int transceiver_cap; int (*transceiver_mode)(struct device *dev, int mode); int (*select_irda)(struct device *dev, int state); - /* Very specific to the needs of some platforms (h3,h4) - * having calls which can sleep in irda_set_speed. - */ - struct delayed_work gpio_expa; int rx_channel; int tx_channel; unsigned long dest_start; diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h index 4435bd434e17..81d5b36534b3 100644 --- a/arch/arm/plat-omap/include/mach/mmc.h +++ b/arch/arm/plat-omap/include/mach/mmc.h @@ -79,7 +79,6 @@ struct omap_mmc_platform_data { /* use the internal clock */ unsigned internal_clock:1; - s16 power_pin; int switch_pin; /* gpio (card detect) */ int gpio_wp; /* gpio (write protect) */ diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/mach/timer-gp.h new file mode 100644 index 000000000000..c88d346b59d9 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/timer-gp.h @@ -0,0 +1,17 @@ +/* + * OMAP2/3 GPTIMER support.headers + * + * Copyright (C) 2009 Nokia Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H + +int __init omap2_gp_clockevent_set_gptimer(u8 id); + +#endif + diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index af819bf21b63..abc79d44acaa 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -121,6 +121,8 @@ static int __init pxa_init_gpio_chip(int gpio_end) return -ENOMEM; } + memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip)); + for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { struct gpio_chip *c = &chips[i].chip; @@ -143,6 +145,21 @@ static int __init pxa_init_gpio_chip(int gpio_end) return 0; } +/* Update only those GRERx and GFERx edge detection register bits if those + * bits are set in c->irq_mask + */ +static inline void update_edge_detect(struct pxa_gpio_chip *c) +{ + uint32_t grer, gfer; + + grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask; + gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask; + grer |= c->irq_edge_rise & c->irq_mask; + gfer |= c->irq_edge_fall & c->irq_mask; + __raw_writel(grer, c->regbase + GRER_OFFSET); + __raw_writel(gfer, c->regbase + GFER_OFFSET); +} + static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) { struct pxa_gpio_chip *c; @@ -181,8 +198,7 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) else c->irq_edge_fall &= ~mask; - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio, ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), @@ -244,8 +260,7 @@ static void pxa_unmask_muxed_gpio(unsigned int irq) struct pxa_gpio_chip *c = gpio_to_chip(gpio); c->irq_mask |= GPIO_bit(gpio); - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); } static struct irq_chip pxa_muxed_gpio_chip = { diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index 0b97e14f73f6..c21a3290d542 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -43,8 +43,6 @@ core-y += arch/avr32/mm/ drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ libs-y += arch/avr32/lib/ -CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch - BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec .PHONY: $(BOOT_TARGETS) install diff --git a/arch/ia64/include/asm/idle.h b/arch/ia64/include/asm/idle.h new file mode 100644 index 000000000000..b7685015a8ba --- /dev/null +++ b/arch/ia64/include/asm/idle.h @@ -0,0 +1,7 @@ +#ifndef _ASM_IA64_IDLE_H +#define _ASM_IA64_IDLE_H + +static inline void enter_idle(void) { } +static inline void exit_idle(void) { } + +#endif /* _ASM_IA64_IDLE_H */ diff --git a/arch/ia64/include/asm/xen/events.h b/arch/ia64/include/asm/xen/events.h index 73248781fba8..b8370c8b6198 100644 --- a/arch/ia64/include/asm/xen/events.h +++ b/arch/ia64/include/asm/xen/events.h @@ -36,14 +36,9 @@ static inline int xen_irqs_disabled(struct pt_regs *regs) return !(ia64_psr(regs)->i); } -static inline void xen_do_IRQ(int irq, struct pt_regs *regs) +static inline void handle_irq(int irq, struct pt_regs *regs) { - struct pt_regs *old_regs; - old_regs = set_irq_regs(regs); - irq_enter(); __do_IRQ(irq); - irq_exit(); - set_irq_regs(old_regs); } #define irq_ctx_init(cpu) do { } while (0) diff --git a/arch/ia64/xen/xensetup.S b/arch/ia64/xen/xensetup.S index 28fed1fcc079..aff8346ea193 100644 --- a/arch/ia64/xen/xensetup.S +++ b/arch/ia64/xen/xensetup.S @@ -54,8 +54,6 @@ END(startup_xen) #define isBP p3 // are we the Bootstrap Processor? - .text - GLOBAL_ENTRY(xen_setup_hook) mov r8=XEN_PV_DOMAIN_ASM (isBP) movl r9=xen_domain_type;; diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile index d908e1d3c07f..560484ae35ec 100644 --- a/arch/m32r/boot/compressed/Makefile +++ b/arch/m32r/boot/compressed/Makefile @@ -6,7 +6,6 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \ piggy.o vmlinux.lds -EXTRA_AFLAGS := -traditional OBJECTS = $(obj)/head.o $(obj)/misc.o diff --git a/arch/m32r/include/asm/assembler.h b/arch/m32r/include/asm/assembler.h index 26351539b5ff..728799fc70aa 100644 --- a/arch/m32r/include/asm/assembler.h +++ b/arch/m32r/include/asm/assembler.h @@ -9,14 +9,15 @@ * This file contains M32R architecture specific macro definitions. */ +#include <linux/stringify.h> + +#undef __STR -#ifndef __STR #ifdef __ASSEMBLY__ #define __STR(x) x #else -#define __STR(x) #x +#define __STR(x) __stringify(x) #endif -#endif /* __STR */ #ifdef CONFIG_SMP #define M32R_LOCK __STR(lock) diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile index 09200d4886e3..b1a4b6036591 100644 --- a/arch/m32r/kernel/Makefile +++ b/arch/m32r/kernel/Makefile @@ -9,5 +9,3 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \ obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_MODULES) += module.o - -EXTRA_AFLAGS := -traditional diff --git a/arch/microblaze/include/asm/of_platform.h b/arch/microblaze/include/asm/of_platform.h index 187c0eedaece..37491276c6ca 100644 --- a/arch/microblaze/include/asm/of_platform.h +++ b/arch/microblaze/include/asm/of_platform.h @@ -36,16 +36,6 @@ static const struct of_device_id of_default_bus_ids[] = { {}, }; -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - /* Platform devices and busses creation */ extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id, diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 4c7804551362..a0d1146a0578 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -181,6 +181,10 @@ config SYS_SUPPORTS_APM_EMULATION default y if PMAC_APM_EMU bool +config DTC + bool + default y + config DEFAULT_UIMAGE bool help diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 4458abb67c51..8da2bf963b57 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(call cc-option-yn, -fstack-protector),y) BOOTCFLAGS += -fno-stack-protector endif -BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt +BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) DTS_FLAGS ?= -p 1024 @@ -53,9 +53,14 @@ zliblinuxheader := zlib.h zconf.h zutil.h $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \ $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) -src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdtheader := fdt.h libfdt.h libfdt_internal.h + +$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \ + $(addprefix $(obj)/,$(libfdtheader)) + src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ - $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \ + $(libfdt) libfdt-wrapper.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \ @@ -96,6 +101,12 @@ $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/% $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/% $(call cmd,copy_zliblinuxheader) +quiet_cmd_copy_libfdt = COPY $@ + cmd_copy_libfdt = cp $< $@ + +$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% + $(call cmd,copy_libfdt) + $(obj)/empty.c: @touch $@ @@ -103,6 +114,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srct @cp $< $@ clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \ + $(libfdt) $(libfdtheader) \ empty.c zImage.coff.lds zImage.ps3.lds zImage.lds quiet_cmd_bootcc = BOOTCC $@ @@ -114,6 +126,8 @@ quiet_cmd_bootas = BOOTAS $@ quiet_cmd_bootar = BOOTAR $@ cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@ +$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE + $(call if_changed_dep,bootcc) $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE $(Q)mkdir -p $(dir $@) $(call if_changed_dep,bootcc) @@ -124,7 +138,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE $(obj)/wrapper.a: $(obj-wlib) FORCE $(call if_changed,bootar) -hostprogs-y := addnote addRamDisk hack-coff mktree dtc +hostprogs-y := addnote addRamDisk hack-coff mktree targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ @@ -133,47 +147,10 @@ extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ dtstree := $(srctree)/$(src)/dts wrapper :=$(srctree)/$(src)/wrapper -wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \ +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ $(wrapper) FORCE ############# -# Bits for building dtc -# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output - -dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o -dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o -dtc-objs := $(addprefix dtc-src/, $(dtc-objs)) - -# prerequisites on generated files needs to be explicit -$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h -$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h - -HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/ - -targets += dtc-src/dtc-parser.tab.c -targets += dtc-src/dtc-lexer.lex.c - -clean-files += dtc-src/dtc-parser.tab.h - -ifdef DTC_GENPARSER -BISON = bison -FLEX = flex - -quiet_cmd_bison = BISON $@ - cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped -quiet_cmd_flex = FLEX $@ - cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped - -$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE - $(call if_changed,bison) - -$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c - -$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE - $(call if_changed,flex) -endif - -############# # Bits for building various flavours of zImage ifneq ($(CROSS32_COMPILE),) @@ -347,8 +324,10 @@ $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb) # Rule to build device tree blobs -$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc - $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts +DTC = $(objtree)/scripts/dtc/dtc + +$(obj)/%.dtb: $(dtstree)/%.dts + $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts # If there isn't a platform selected then just strip the vmlinux. ifeq (,$(image-y)) diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c index c58a0dada992..21cd48074ec8 100644 --- a/arch/powerpc/boot/simpleboot.c +++ b/arch/powerpc/boot/simpleboot.c @@ -19,7 +19,7 @@ #include "types.h" #include "io.h" #include "stdio.h" -#include "libfdt/libfdt.h" +#include <libfdt.h> BSS_STACK(4*1024); diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h index 53b46507ffde..d4aaa3489440 100644 --- a/arch/powerpc/include/asm/of_platform.h +++ b/arch/powerpc/include/asm/of_platform.h @@ -11,16 +11,6 @@ * */ -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - /* Platform devices and busses creation */ extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id, diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index cd1b687544f3..f9c40f869c6e 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -382,7 +382,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power5+", + .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power5+", }, { /* Power6 */ @@ -416,7 +417,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power6", + .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power6", }, { /* 2.06-compliant processor, i.e. Power7 "architected" mode */ @@ -429,7 +431,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power7", + .oprofile_type = PPC_OPROFILE_POWER4, + .oprofile_cpu_type = "ppc64/ibm-compat-v1", .platform = "power7", }, { /* Power7 */ @@ -1833,8 +1836,10 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * and, in that case, keep the current value for * oprofile_cpu_type. */ - if (old.oprofile_cpu_type == NULL) - t->oprofile_cpu_type = s->oprofile_cpu_type; + if (old.oprofile_cpu_type == NULL) { + t->oprofile_cpu_type = old.oprofile_cpu_type; + t->oprofile_type = old.oprofile_type; + } } *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec; diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 563933e06a35..4f8c199584e7 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -137,6 +137,7 @@ DECLARE_PER_CPU(mce_banks_t, mce_poll_banks); enum mcp_flags { MCP_TIMESTAMP = (1 << 0), /* log time stamp */ MCP_UC = (1 << 1), /* log uncorrected errors */ + MCP_DONTLOG = (1 << 2), /* only clear, don't log */ }; extern void machine_check_poll(enum mcp_flags flags, mce_banks_t *b); diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 42c33cebf00f..8c0be0902dac 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -49,10 +49,10 @@ #define IVHD_DEV_EXT_SELECT 0x46 #define IVHD_DEV_EXT_SELECT_RANGE 0x47 -#define IVHD_FLAG_HT_TUN_EN 0x00 -#define IVHD_FLAG_PASSPW_EN 0x01 -#define IVHD_FLAG_RESPASSPW_EN 0x02 -#define IVHD_FLAG_ISOC_EN 0x03 +#define IVHD_FLAG_HT_TUN_EN_MASK 0x01 +#define IVHD_FLAG_PASSPW_EN_MASK 0x02 +#define IVHD_FLAG_RESPASSPW_EN_MASK 0x04 +#define IVHD_FLAG_ISOC_EN_MASK 0x08 #define IVMD_FLAG_EXCL_RANGE 0x08 #define IVMD_FLAG_UNITY_MAP 0x01 @@ -569,19 +569,19 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, * First set the recommended feature enable bits from ACPI * into the IOMMU control registers */ - h->flags & IVHD_FLAG_HT_TUN_EN ? + h->flags & IVHD_FLAG_HT_TUN_EN_MASK ? iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) : iommu_feature_disable(iommu, CONTROL_HT_TUN_EN); - h->flags & IVHD_FLAG_PASSPW_EN ? + h->flags & IVHD_FLAG_PASSPW_EN_MASK ? iommu_feature_enable(iommu, CONTROL_PASSPW_EN) : iommu_feature_disable(iommu, CONTROL_PASSPW_EN); - h->flags & IVHD_FLAG_RESPASSPW_EN ? + h->flags & IVHD_FLAG_RESPASSPW_EN_MASK ? iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) : iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN); - h->flags & IVHD_FLAG_ISOC_EN ? + h->flags & IVHD_FLAG_ISOC_EN_MASK ? iommu_feature_enable(iommu, CONTROL_ISOC_EN) : iommu_feature_disable(iommu, CONTROL_ISOC_EN); diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c4f667896c28..c1caefc82e62 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1203,6 +1203,8 @@ void __cpuinit cpu_init(void) load_TR_desc(); load_LDT(&init_mm.context); + t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); + #ifdef CONFIG_DOUBLEFAULT /* Set up doublefault TSS pointer in the GDT */ __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 863f89568b1a..6fb0b359d2a5 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -239,9 +239,10 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b) * Don't get the IP here because it's unlikely to * have anything to do with the actual error location. */ - - mce_log(&m); - add_taint(TAINT_MACHINE_CHECK); + if (!(flags & MCP_DONTLOG)) { + mce_log(&m); + add_taint(TAINT_MACHINE_CHECK); + } /* * Clear state for this bank. @@ -452,13 +453,14 @@ void mce_log_therm_throt_event(__u64 status) */ static int check_interval = 5 * 60; /* 5 minutes */ -static int next_interval; /* in jiffies */ +static DEFINE_PER_CPU(int, next_interval); /* in jiffies */ static void mcheck_timer(unsigned long); static DEFINE_PER_CPU(struct timer_list, mce_timer); static void mcheck_timer(unsigned long data) { struct timer_list *t = &per_cpu(mce_timer, data); + int *n; WARN_ON(smp_processor_id() != data); @@ -470,14 +472,14 @@ static void mcheck_timer(unsigned long data) * Alert userspace if needed. If we logged an MCE, reduce the * polling interval, otherwise increase the polling interval. */ + n = &__get_cpu_var(next_interval); if (mce_notify_user()) { - next_interval = max(next_interval/2, HZ/100); + *n = max(*n/2, HZ/100); } else { - next_interval = min(next_interval * 2, - (int)round_jiffies_relative(check_interval*HZ)); + *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ)); } - t->expires = jiffies + next_interval; + t->expires = jiffies + *n; add_timer(t); } @@ -584,7 +586,7 @@ static void mce_init(void *dummy) * Log the machine checks left over from the previous reset. */ bitmap_fill(all_banks, MAX_NR_BANKS); - machine_check_poll(MCP_UC, &all_banks); + machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks); set_in_cr4(X86_CR4_MCE); @@ -632,14 +634,13 @@ static void mce_cpu_features(struct cpuinfo_x86 *c) static void mce_init_timer(void) { struct timer_list *t = &__get_cpu_var(mce_timer); + int *n = &__get_cpu_var(next_interval); - /* data race harmless because everyone sets to the same value */ - if (!next_interval) - next_interval = check_interval * HZ; - if (!next_interval) + *n = check_interval * HZ; + if (!*n) return; setup_timer(t, mcheck_timer, smp_processor_id()); - t->expires = round_jiffies(jiffies + next_interval); + t->expires = round_jiffies(jiffies + *n); add_timer(t); } @@ -907,7 +908,6 @@ static void mce_cpu_restart(void *data) /* Reinit MCEs after user configuration changes */ static void mce_restart(void) { - next_interval = check_interval * HZ; on_each_cpu(mce_cpu_restart, NULL, 1); } @@ -1110,7 +1110,8 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb, break; case CPU_DOWN_FAILED: case CPU_DOWN_FAILED_FROZEN: - t->expires = round_jiffies(jiffies + next_interval); + t->expires = round_jiffies(jiffies + + __get_cpu_var(next_interval)); add_timer_on(t, cpu); smp_call_function_single(cpu, mce_reenable_cpu, &action, 1); break; diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c index f93047fed791..d5e30397246b 100644 --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c, if (c->x86_max_cores * smp_num_siblings > 1) { seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); seq_printf(m, "siblings\t: %d\n", - cpumask_weight(cpu_sibling_mask(cpu))); + cpumask_weight(cpu_core_mask(cpu))); seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id); seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); seq_printf(m, "apicid\t\t: %d\n", c->apicid); diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 4f115e00486b..50dc802a1c46 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -87,7 +87,7 @@ static struct kmmio_probe *get_kmmio_probe(unsigned long addr) { struct kmmio_probe *p; list_for_each_entry_rcu(p, &kmmio_probes, list) { - if (addr >= p->addr && addr <= (p->addr + p->len)) + if (addr >= p->addr && addr < (p->addr + p->len)) return p; } return NULL; diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c index d9d35824c56f..6a40b78b46aa 100644 --- a/arch/x86/vdso/vclock_gettime.c +++ b/arch/x86/vdso/vclock_gettime.c @@ -104,11 +104,13 @@ notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) { long ret; if (likely(gtod->sysctl_enabled && gtod->clock.vread)) { - BUILD_BUG_ON(offsetof(struct timeval, tv_usec) != - offsetof(struct timespec, tv_nsec) || - sizeof(*tv) != sizeof(struct timespec)); - do_realtime((struct timespec *)tv); - tv->tv_usec /= 1000; + if (likely(tv != NULL)) { + BUILD_BUG_ON(offsetof(struct timeval, tv_usec) != + offsetof(struct timespec, tv_nsec) || + sizeof(*tv) != sizeof(struct timespec)); + do_realtime((struct timespec *)tv); + tv->tv_usec /= 1000; + } if (unlikely(tz != NULL)) { /* Avoid memcpy. Some old compilers fail to inline it */ tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest; diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index b6667ff059e5..88b5a2c4814d 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -543,6 +543,13 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, package_element = *top_object_list; + /* We must have a valid Package object */ + + if (!package_element || + (package_element->common.type != ACPI_TYPE_PACKAGE)) { + return_ACPI_STATUS (AE_AML_OPERAND_TYPE); + } + /* * The sub_object_list will now point to an array of the * four IRQ elements: Address, Pin, Source and source_index diff --git a/drivers/base/iommu.c b/drivers/base/iommu.c index 9f0e672f4be8..8ad4ffea6920 100644 --- a/drivers/base/iommu.c +++ b/drivers/base/iommu.c @@ -18,6 +18,8 @@ #include <linux/bug.h> #include <linux/types.h> +#include <linux/module.h> +#include <linux/slab.h> #include <linux/errno.h> #include <linux/iommu.h> diff --git a/drivers/char/random.c b/drivers/char/random.c index f824ef8a9273..b2ced39d76b2 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1665,15 +1665,20 @@ EXPORT_SYMBOL(secure_dccp_sequence_number); * value is not cryptographically secure but for several uses the cost of * depleting entropy is too high */ +DEFINE_PER_CPU(__u32 [4], get_random_int_hash); unsigned int get_random_int(void) { - /* - * Use IP's RNG. It suits our purpose perfectly: it re-keys itself - * every second, from the entropy pool (and thus creates a limited - * drain on it), and uses halfMD4Transform within the second. We - * also mix it with jiffies and the PID: - */ - return secure_ip_id((__force __be32)(current->pid + jiffies)); + struct keydata *keyptr; + __u32 *hash = get_cpu_var(get_random_int_hash); + int ret; + + keyptr = get_keyptr(); + hash[0] += current->pid + jiffies + get_cycles() + (int)(long)&ret; + + ret = half_md4_transform(hash, keyptr->secret); + put_cpu_var(get_random_int_hash); + + return ret; } /* diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index a2dee0eb6dad..e6ce632a393e 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -400,6 +400,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, case KIOCSOUND: if (!perm) goto eperm; + /* FIXME: This is an old broken API but we need to keep it + supported and somehow separate the historic advertised + tick rate from any real one */ if (arg) arg = CLOCK_TICK_RATE / arg; kd_mksound(arg, 0); @@ -417,6 +420,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, */ ticks = HZ * ((arg >> 16) & 0xffff) / 1000; count = ticks ? (arg & 0xffff) : 0; + /* FIXME: This is an old broken API but we need to keep it + supported and somehow separate the historic advertised + tick rate from any real one */ if (count) count = CLOCK_TICK_RATE / count; kd_mksound(count, ticks); diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index 7b7ddc2d51c9..420a96e7f2db 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -754,11 +754,11 @@ static int __init ibft_check_nic_for(struct ibft_nic *nic, int entry) rc = 1; break; case ibft_eth_ip_addr: - if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp))) + if (memcmp(nic->ip_addr, nulls, sizeof(nic->ip_addr))) rc = 1; break; case ibft_eth_subnet_mask: - if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp))) + if (nic->subnet_mask_prefix) rc = 1; break; case ibft_eth_origin: diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index a04639dc633d..45890447feec 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -561,7 +561,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, int saved_x, saved_y; struct drm_encoder *encoder; bool ret = true; - bool depth_changed, bpp_changed; adjusted_mode = drm_mode_duplicate(dev, mode); @@ -570,15 +569,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, if (!crtc->enabled) return true; - if (old_fb && crtc->fb) { - depth_changed = (old_fb->depth != crtc->fb->depth); - bpp_changed = (old_fb->bits_per_pixel != - crtc->fb->bits_per_pixel); - } else { - depth_changed = true; - bpp_changed = true; - } - saved_mode = crtc->mode; saved_x = crtc->x; saved_y = crtc->y; @@ -590,15 +580,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, crtc->x = x; crtc->y = y; - if (drm_mode_equal(&saved_mode, &crtc->mode)) { - if (saved_x != crtc->x || saved_y != crtc->y || - depth_changed || bpp_changed) { - ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, - old_fb); - goto done; - } - } - /* Pass our mode to the connectors and the CRTC to give them a chance to * adjust it according to limitations or connector properties, and also * a chance to reject the mode entirely. diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index c4ada8b6295b..f01def16a669 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -456,7 +456,8 @@ int drm_ioctl(struct inode *inode, struct file *filp, retcode = -EINVAL; } else if (((ioctl->flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)) || ((ioctl->flags & DRM_AUTH) && !file_priv->authenticated) || - ((ioctl->flags & DRM_MASTER) && !file_priv->is_master)) { + ((ioctl->flags & DRM_MASTER) && !file_priv->is_master) || + (!(ioctl->flags & DRM_CONTROL_ALLOW) && (file_priv->minor->type == DRM_MINOR_CONTROL))) { retcode = -EACCES; } else { if (cmd & (IOC_IN | IOC_OUT)) { diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index ef878615c49f..b9631e3a1ea6 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -402,14 +402,14 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, if (dev->driver->load) { ret = dev->driver->load(dev, ent->driver_data); if (ret) - goto err_g3; + goto err_g4; } /* setup the grouping for the legacy output */ if (drm_core_check_feature(dev, DRIVER_MODESET)) { ret = drm_mode_group_init_legacy_group(dev, &dev->primary->mode_group); if (ret) - goto err_g3; + goto err_g4; } list_add_tail(&dev->driver_item, &driver->device_list); @@ -420,8 +420,11 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, return 0; -err_g3: +err_g4: drm_put_minor(&dev->primary); +err_g3: + if (drm_core_check_feature(dev, DRIVER_MODESET)) + drm_put_minor(&dev->control); err_g2: pci_disable_device(pdev); err_g1: @@ -502,11 +505,11 @@ void drm_put_dev(struct drm_device *dev) dev->agp = NULL; } - drm_ht_remove(&dev->map_hash); - drm_ctxbitmap_cleanup(dev); - list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) drm_rmmap(dev, r_list->map); + drm_ht_remove(&dev->map_hash); + + drm_ctxbitmap_cleanup(dev); if (drm_core_check_feature(dev, DRIVER_MODESET)) drm_put_minor(&dev->control); diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index 022876ae34f0..8f9372921f82 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -489,9 +489,7 @@ int drm_sysfs_device_add(struct drm_minor *minor) return 0; - device_unregister(&minor->kdev); err_out: - return err; } diff --git a/drivers/gpu/drm/r128/r128_cce.c b/drivers/gpu/drm/r128/r128_cce.c index 32de4cedc363..077c0455a6b9 100644 --- a/drivers/gpu/drm/r128/r128_cce.c +++ b/drivers/gpu/drm/r128/r128_cce.c @@ -511,9 +511,9 @@ static int r128_do_init_cce(struct drm_device * dev, drm_r128_init_t * init) #if __OS_HAS_AGP if (!dev_priv->is_pci) { - drm_core_ioremap(dev_priv->cce_ring, dev); - drm_core_ioremap(dev_priv->ring_rptr, dev); - drm_core_ioremap(dev->agp_buffer_map, dev); + drm_core_ioremap_wc(dev_priv->cce_ring, dev); + drm_core_ioremap_wc(dev_priv->ring_rptr, dev); + drm_core_ioremap_wc(dev->agp_buffer_map, dev); if (!dev_priv->cce_ring->handle || !dev_priv->ring_rptr->handle || !dev->agp_buffer_map->handle) { diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index ed4d27e6ee6f..8071d965f142 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -99,9 +99,10 @@ * 1.27- Add support for IGP GART * 1.28- Add support for VBL on CRTC2 * 1.29- R500 3D cmd buffer support + * 1.30- Add support for occlusion queries */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 29 +#define DRIVER_MINOR 30 #define DRIVER_PATCHLEVEL 0 /* diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 7359d9d88e46..acbce5745b0c 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -151,7 +151,7 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input, if (fnmode) { int do_translate; - trans = apple_find_translation((hid->product < 0x220 || + trans = apple_find_translation((hid->product < 0x21d || hid->product >= 0x300) ? powerbook_fn_keys : apple_fn_keys, usage->code); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 5746a5903bce..8551693d645f 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1293,6 +1293,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) }, @@ -1824,6 +1825,9 @@ int hid_check_keys_pressed(struct hid_device *hid) struct hid_input *hidinput; int i; + if (!(hid->claimed & HID_CLAIMED_INPUT)) + return 0; + list_for_each_entry(hidinput, &hid->inputs, list) { for (i = 0; i < BITS_TO_LONGS(KEY_MAX); i++) if (hidinput->input->key[i]) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index bdeda4c7cc13..aa1b995dd033 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -292,6 +292,7 @@ #define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO 0xc286 #define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294 #define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295 +#define USB_DEVICE_ID_LOGITECH_G25_WHEEL 0xc299 #define USB_DEVICE_ID_LOGITECH_ELITE_KBD 0xc30a #define USB_DEVICE_ID_S510_RECEIVER 0xc50c #define USB_DEVICE_ID_S510_RECEIVER_2 0xc517 diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c index 7b80cb694982..7afbaa0efd18 100644 --- a/drivers/hid/hid-lg.c +++ b/drivers/hid/hid-lg.c @@ -297,6 +297,8 @@ static const struct hid_device_id lg_devices[] = { .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2), .driver_data = LG_FF }, + { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL), + .driver_data = LG_FF }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2), .driver_data = LG_FF2 }, { } diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index e263d4731179..00ccf4b1985d 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -285,8 +285,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) { int len; - if (!hid->name) - return 0; + if (!hid->name) { + ret = 0; + break; + } len = strlen(hid->name) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); @@ -297,8 +299,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) { int len; - if (!hid->phys) - return 0; + if (!hid->phys) { + ret = 0; + break; + } len = strlen(hid->phys) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 4306cb1b8ce5..900ce18dd549 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -662,8 +662,8 @@ void usbhid_close(struct hid_device *hid) spin_lock_irq(&usbhid->lock); if (!--hid->open) { spin_unlock_irq(&usbhid->lock); + hid_cancel_delayed_stuff(usbhid); usb_kill_urb(usbhid->urbin); - flush_scheduled_work(); usbhid->intf->needs_remote_wakeup = 0; } else { spin_unlock_irq(&usbhid->lock); diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index d420cc5f5633..e25e13980af3 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -104,7 +104,7 @@ static int sclhi(struct i2c_algo_bit_data *adap) * chips may hold it low ("clock stretching") while they * are processing data internally. */ - if (time_after_eq(jiffies, start + adap->timeout)) + if (time_after(jiffies, start + adap->timeout)) return -ETIMEDOUT; cond_resched(); } diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 6318f7ddc1d4..78d42aae0089 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -287,10 +287,21 @@ static int pca_xfer(struct i2c_adapter *i2c_adap, case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */ DEB2("NOT ACK received after data byte\n"); + pca_stop(adap); goto out; case 0x38: /* Arbitration lost during SLA+W, SLA+R or data bytes */ DEB2("Arbitration lost\n"); + /* + * The PCA9564 data sheet (2006-09-01) says "A + * START condition will be transmitted when the + * bus becomes free (STOP or SCL and SDA high)" + * when the STA bit is set (p. 11). + * + * In case this won't work, try pca_reset() + * instead. + */ + pca_start(adap); goto out; case 0x58: /* Data byte has been received; NOT ACK has been returned */ diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 981e080b32ae..d108450df064 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -284,7 +284,7 @@ static int ali1535_transaction(struct i2c_adapter *adap) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { result = -ETIMEDOUT; dev_err(&adap->dev, "SMBus Timeout!\n"); } diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 39066dee46e3..d627fceb790b 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -306,7 +306,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { result = -ETIMEDOUT; dev_err(&adap->dev, "SMBus Timeout!\n"); } diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 220f4a1eee1d..f7d6fe9c49ba 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -126,7 +126,7 @@ static int amd756_transaction(struct i2c_adapter *adap) } while ((temp & (GS_HST_STS | GS_SMB_STS)) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp); goto abort; } @@ -143,7 +143,7 @@ static int amd756_transaction(struct i2c_adapter *adap) } while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "Completion timeout!\n"); goto abort; } diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 10411848fd70..9d2c5adf5d4f 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -237,7 +237,7 @@ static int i801_transaction(int xact) status = inb_p(SMBHSTSTS); } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT)); - result = i801_check_post(status, timeout >= MAX_TIMEOUT); + result = i801_check_post(status, timeout > MAX_TIMEOUT); if (result < 0) return result; @@ -257,9 +257,9 @@ static void i801_wait_hwpec(void) } while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_TIMEOUT)); - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) dev_dbg(&I801_dev->dev, "PEC Timeout!\n"); - } + outb_p(status, SMBHSTSTS); } @@ -344,7 +344,7 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_TIMEOUT)); - result = i801_check_post(status, timeout >= MAX_TIMEOUT); + result = i801_check_post(status, timeout > MAX_TIMEOUT); if (result < 0) return result; diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c index b9c01aa90036..9f6b8e0f8632 100644 --- a/drivers/i2c/busses/i2c-isch.c +++ b/drivers/i2c/busses/i2c-isch.c @@ -112,7 +112,7 @@ static int sch_transaction(void) } while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_err(&sch_adapter.dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 2ff4683703a8..ec11d1c4e77b 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -173,7 +173,7 @@ static int nforce2_check_status(struct i2c_adapter *adap) temp = inb_p(NVIDIA_SMB_STS); } while ((!temp) && (timeout++ < MAX_TIMEOUT)); - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); if (smbus->can_abort) nforce2_abort(adap); diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index f320ab27da46..139f0c7f12a4 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -256,7 +256,7 @@ static int sis5595_transaction(struct i2c_adapter *adap) } while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 50c3610e6028..70ca41e90e58 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -173,7 +173,7 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size) } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 7e1594b40579..8295885b2fdb 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -132,7 +132,7 @@ static int sis96x_transaction(int size) } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp); result = -ETIMEDOUT; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 3d4e09969763..925eb9e245d1 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -312,7 +312,6 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) ide_hwif_t *hwif = drive->hwif; struct request *rq = hwif->rq; int err, sense_key, do_end_request = 0; - u8 quiet = rq->cmd_flags & REQ_QUIET; /* get the IDE error register */ err = ide_read_error(drive); @@ -347,7 +346,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) } else { cdrom_saw_media_change(drive); - if (blk_fs_request(rq) && !quiet) + if (blk_fs_request(rq) && !blk_rq_quiet(rq)) printk(KERN_ERR PFX "%s: tray open\n", drive->name); } @@ -382,7 +381,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) * No point in retrying after an illegal request or data * protect error. */ - if (!quiet) + if (!blk_rq_quiet(rq)) ide_dump_status(drive, "command error", stat); do_end_request = 1; break; @@ -391,14 +390,14 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat) * No point in re-trying a zillion times on a bad sector. * If we got here the error is not correctable. */ - if (!quiet) + if (!blk_rq_quiet(rq)) ide_dump_status(drive, "media error " "(bad sector)", stat); do_end_request = 1; break; case BLANK_CHECK: /* disk appears blank? */ - if (!quiet) + if (!blk_rq_quiet(rq)) ide_dump_status(drive, "media error (blank)", stat); do_end_request = 1; diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index 13d7674b293d..75223f50de58 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -599,6 +599,7 @@ static struct scsi_host_template iscsi_iser_sht = { .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler= iscsi_eh_device_reset, .eh_target_reset_handler= iscsi_eh_target_reset, + .target_alloc = iscsi_target_alloc, .use_clustering = DISABLE_CLUSTERING, .proc_name = "iscsi_iser", .this_id = -1, diff --git a/drivers/input/input.c b/drivers/input/input.c index 935a1835de2d..e54e002665b0 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -29,6 +29,23 @@ MODULE_LICENSE("GPL"); #define INPUT_DEVICES 256 +/* + * EV_ABS events which should not be cached are listed here. + */ +static unsigned int input_abs_bypass_init_data[] __initdata = { + ABS_MT_TOUCH_MAJOR, + ABS_MT_TOUCH_MINOR, + ABS_MT_WIDTH_MAJOR, + ABS_MT_WIDTH_MINOR, + ABS_MT_ORIENTATION, + ABS_MT_POSITION_X, + ABS_MT_POSITION_Y, + ABS_MT_TOOL_TYPE, + ABS_MT_BLOB_ID, + 0 +}; +static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; + static LIST_HEAD(input_dev_list); static LIST_HEAD(input_handler_list); @@ -161,6 +178,10 @@ static void input_handle_event(struct input_dev *dev, disposition = INPUT_PASS_TO_HANDLERS; } break; + case SYN_MT_REPORT: + dev->sync = 0; + disposition = INPUT_PASS_TO_HANDLERS; + break; } break; @@ -192,6 +213,11 @@ static void input_handle_event(struct input_dev *dev, case EV_ABS: if (is_event_supported(code, dev->absbit, ABS_MAX)) { + if (test_bit(code, input_abs_bypass)) { + disposition = INPUT_PASS_TO_HANDLERS; + break; + } + value = input_defuzz_abs_event(value, dev->abs[code], dev->absfuzz[code]); @@ -1634,10 +1660,20 @@ static const struct file_operations input_fops = { .open = input_open_file, }; +static void __init input_init_abs_bypass(void) +{ + const unsigned int *p; + + for (p = input_abs_bypass_init_data; *p; p++) + input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p); +} + static int __init input_init(void) { int err; + input_init_abs_bypass(); + err = class_register(&input_class); if (err) { printk(KERN_ERR "input: unable to register input_dev class\n"); diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 058fa8b02c21..87ec7b18ac69 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -100,8 +100,20 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) /* disable keyboard interrupt and schedule for handling */ if (cpu_is_omap24xx()) { int i; - for (i = 0; i < omap_kp->rows; i++) - disable_irq(gpio_to_irq(row_gpios[i])); + + for (i = 0; i < omap_kp->rows; i++) { + int gpio_irq = gpio_to_irq(row_gpios[i]); + /* + * The interrupt which we're currently handling should + * be disabled _nosync() to avoid deadlocks waiting + * for this handler to complete. All others should + * be disabled the regular way for SMP safety. + */ + if (gpio_irq == irq) + disable_irq_nosync(gpio_irq); + else + disable_irq(gpio_irq); + } } else /* disable keyboard interrupt and schedule for handling */ omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index cbedf957cc58..daecc75c72e6 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -37,6 +37,7 @@ #define ALPS_FW_BK_2 0x40 static const struct alps_model_info alps_model_data[] = { + { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ { { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */ { { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 }, { { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 }, diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 454b96112f03..e0140fdc02a5 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -255,15 +255,22 @@ MODULE_PARM_DESC(debug, "Activate debugging output"); */ static int atp_geyser_init(struct usb_device *udev) { - char data[8]; + char *data; int size; int i; + int ret; + + data = kmalloc(8, GFP_KERNEL); + if (!data) { + err("Out of memory"); + return -ENOMEM; + } size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), ATP_GEYSER_MODE_READ_REQUEST_ID, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, ATP_GEYSER_MODE_REQUEST_VALUE, - ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000); + ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { dprintk("atp_geyser_init: read error\n"); @@ -271,7 +278,8 @@ static int atp_geyser_init(struct usb_device *udev) dprintk("appletouch[%d]: %d\n", i, data[i]); err("Failed to read mode from device."); - return -EIO; + ret = -EIO; + goto out_free; } /* Apply the mode switch */ @@ -281,7 +289,7 @@ static int atp_geyser_init(struct usb_device *udev) ATP_GEYSER_MODE_WRITE_REQUEST_ID, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, ATP_GEYSER_MODE_REQUEST_VALUE, - ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000); + ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000); if (size != 8) { dprintk("atp_geyser_init: write error\n"); @@ -289,9 +297,13 @@ static int atp_geyser_init(struct usb_device *udev) dprintk("appletouch[%d]: %d\n", i, data[i]); err("Failed to request geyser raw mode"); - return -EIO; + ret = -EIO; + goto out_free; } - return 0; + ret = 0; +out_free: + kfree(data); + return ret; } /* diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 2998a6ac9ae4..2d8fc0bf6923 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -51,6 +51,10 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231 #define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232 +/* Macbook5,1 (unibody), aka wellspring3 */ +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238 #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ @@ -72,6 +76,10 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS), + /* Macbook5,1 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS), /* Terminating entry */ {} }; @@ -96,14 +104,23 @@ struct bt_data { u8 rel_y; /* relative y coordinate */ }; -/* trackpad header structure */ -struct tp_header { - u8 unknown1[16]; /* constants, timers, etc */ - u8 fingers; /* number of fingers on trackpad */ - u8 unknown2[9]; /* constants, timers, etc */ +/* trackpad header types */ +enum tp_type { + TYPE1, /* plain trackpad */ + TYPE2 /* button integrated in trackpad */ }; -/* trackpad finger structure */ +/* trackpad finger data offsets, le16-aligned */ +#define FINGER_TYPE1 (13 * sizeof(__le16)) +#define FINGER_TYPE2 (15 * sizeof(__le16)) + +/* trackpad button data offsets */ +#define BUTTON_TYPE2 15 + +/* list of device capability bits */ +#define HAS_INTEGRATED_BUTTON 1 + +/* trackpad finger structure, le16-aligned */ struct tp_finger { __le16 origin; /* zero when switching track finger */ __le16 abs_x; /* absolute x coodinate */ @@ -117,13 +134,11 @@ struct tp_finger { __le16 force_minor; /* trackpad force, minor axis? */ __le16 unused[3]; /* zeros */ __le16 multi; /* one finger: varies, more fingers: constant */ -}; +} __attribute__((packed,aligned(2))); -/* trackpad data structure, empirically at least ten fingers */ -struct tp_data { - struct tp_header header; - struct tp_finger finger[16]; -}; +/* trackpad finger data size, empirically at least ten fingers */ +#define SIZEOF_FINGER sizeof(struct tp_finger) +#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER) /* device-specific parameters */ struct bcm5974_param { @@ -136,9 +151,12 @@ struct bcm5974_param { /* device-specific configuration */ struct bcm5974_config { int ansi, iso, jis; /* the product id of this device */ + int caps; /* device capability bitmask */ int bt_ep; /* the endpoint of the button interface */ int bt_datalen; /* data length of the button interface */ int tp_ep; /* the endpoint of the trackpad interface */ + enum tp_type tp_type; /* type of trackpad interface */ + int tp_offset; /* offset to trackpad finger data */ int tp_datalen; /* data length of the trackpad interface */ struct bcm5974_param p; /* finger pressure limits */ struct bcm5974_param w; /* finger width limits */ @@ -158,7 +176,7 @@ struct bcm5974 { struct urb *bt_urb; /* button usb request block */ struct bt_data *bt_data; /* button transferred data */ struct urb *tp_urb; /* trackpad usb request block */ - struct tp_data *tp_data; /* trackpad transferred data */ + u8 *tp_data; /* trackpad transferred data */ int fingers; /* number of fingers on trackpad */ }; @@ -183,8 +201,9 @@ static const struct bcm5974_config bcm5974_config_table[] = { USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, + 0, 0x84, sizeof(struct bt_data), - 0x81, sizeof(struct tp_data), + 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, { DIM_X, DIM_X / SN_COORD, -4824, 5342 }, @@ -194,13 +213,26 @@ static const struct bcm5974_config bcm5974_config_table[] = { USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, + 0, 0x84, sizeof(struct bt_data), - 0x81, sizeof(struct tp_data), + 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS, { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, { DIM_X, DIM_X / SN_COORD, -4824, 4824 }, { DIM_Y, DIM_Y / SN_COORD, -172, 4290 } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING3_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING3_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4460, 5166 }, + { DIM_Y, DIM_Y / SN_COORD, -75, 6700 } + }, {} }; @@ -257,6 +289,7 @@ static void setup_events_to_report(struct input_dev *input_dev, __set_bit(BTN_TOOL_FINGER, input_dev->keybit); __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit); __set_bit(BTN_LEFT, input_dev->keybit); } @@ -266,6 +299,11 @@ static int report_bt_state(struct bcm5974 *dev, int size) if (size != sizeof(struct bt_data)) return -EIO; + dprintk(7, + "bcm5974: button data: %x %x %x %x\n", + dev->bt_data->unknown1, dev->bt_data->button, + dev->bt_data->rel_x, dev->bt_data->rel_y); + input_report_key(dev->input, BTN_LEFT, dev->bt_data->button); input_sync(dev->input); @@ -276,29 +314,37 @@ static int report_bt_state(struct bcm5974 *dev, int size) static int report_tp_state(struct bcm5974 *dev, int size) { const struct bcm5974_config *c = &dev->cfg; - const struct tp_finger *f = dev->tp_data->finger; + const struct tp_finger *f; struct input_dev *input = dev->input; - const int fingers = (size - 26) / 28; - int raw_p, raw_w, raw_x, raw_y; - int ptest = 0, origin = 0, nmin = 0, nmax = 0; + int raw_p, raw_w, raw_x, raw_y, raw_n; + int ptest = 0, origin = 0, ibt = 0, nmin = 0, nmax = 0; int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0; - if (size < 26 || (size - 26) % 28 != 0) + if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0) return -EIO; + /* finger data, le16-aligned */ + f = (const struct tp_finger *)(dev->tp_data + c->tp_offset); + raw_n = (size - c->tp_offset) / SIZEOF_FINGER; + /* always track the first finger; when detached, start over */ - if (fingers) { + if (raw_n) { raw_p = raw2int(f->force_major); raw_w = raw2int(f->size_major); raw_x = raw2int(f->abs_x); raw_y = raw2int(f->abs_y); dprintk(9, - "bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n", - raw_p, raw_w, raw_x, raw_y); + "bcm5974: " + "raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n", + raw_p, raw_w, raw_x, raw_y, raw_n); ptest = int2bound(&c->p, raw_p); origin = raw2int(f->origin); + + /* set the integrated button if applicable */ + if (c->tp_type == TYPE2) + ibt = raw2int(dev->tp_data[BUTTON_TYPE2]); } /* while tracking finger still valid, count all fingers */ @@ -307,12 +353,13 @@ static int report_tp_state(struct bcm5974 *dev, int size) abs_w = int2bound(&c->w, raw_w); abs_x = int2bound(&c->x, raw_x - c->x.devmin); abs_y = int2bound(&c->y, c->y.devmax - raw_y); - for (; f != dev->tp_data->finger + fingers; f++) { + while (raw_n--) { ptest = int2bound(&c->p, raw2int(f->force_major)); if (ptest > PRESSURE_LOW) nmax++; if (ptest > PRESSURE_HIGH) nmin++; + f++; } } @@ -324,7 +371,8 @@ static int report_tp_state(struct bcm5974 *dev, int size) input_report_key(input, BTN_TOUCH, dev->fingers > 0); input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1); input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2); - input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2); + input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers == 3); + input_report_key(input, BTN_TOOL_QUADTAP, dev->fingers > 3); input_report_abs(input, ABS_PRESSURE, abs_p); input_report_abs(input, ABS_TOOL_WIDTH, abs_w); @@ -335,11 +383,15 @@ static int report_tp_state(struct bcm5974 *dev, int size) dprintk(8, "bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d " - "nmin: %d nmax: %d n: %d\n", - abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers); + "nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w, + abs_x, abs_y, nmin, nmax, dev->fingers, ibt); } + /* type 2 reports button events via ibt only */ + if (c->tp_type == TYPE2) + input_report_key(input, BTN_LEFT, ibt); + input_sync(input); return 0; @@ -649,6 +701,8 @@ static int bcm5974_probe(struct usb_interface *iface, input_dev->name = "bcm5974"; input_dev->phys = dev->phys; usb_to_input_id(dev->udev, &input_dev->id); + /* report driver capabilities via the version field */ + input_dev->id.version = cfg->caps; input_dev->dev.parent = &iface->dev; input_set_drvdata(input_dev, dev); diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 6ab0eb1ada1c..4bc78892ba91 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1,7 +1,7 @@ /* - * Elantech Touchpad driver (v5) + * Elantech Touchpad driver (v6) * - * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net> + * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -178,6 +178,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) struct elantech_data *etd = psmouse->private; unsigned char *packet = psmouse->packet; int fingers; + static int old_fingers; if (etd->fw_version_maj == 0x01) { /* byte 0: D U p1 p2 1 p3 R L @@ -190,6 +191,14 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) fingers = (packet[0] & 0xc0) >> 6; } + if (etd->jumpy_cursor) { + /* Discard packets that are likely to have bogus coordinates */ + if (fingers > old_fingers) { + elantech_debug("elantech.c: discarding packet\n"); + goto discard_packet_v1; + } + } + input_report_key(dev, BTN_TOUCH, fingers != 0); /* byte 2: x7 x6 x5 x4 x3 x2 x1 x0 @@ -216,6 +225,9 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) } input_sync(dev); + + discard_packet_v1: + old_fingers = fingers; } /* @@ -363,9 +375,14 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) rc = -1; break; } + } + + if (rc == 0) { /* - * Read back reg 0x10. The touchpad is probably initalising - * and not ready until we read back the value we just wrote. + * Read back reg 0x10. For hardware version 1 we must make + * sure the absolute mode bit is set. For hardware version 2 + * the touchpad is probably initalising and not ready until + * we read back the value we just wrote. */ do { rc = elantech_read_reg(psmouse, 0x10, &val); @@ -373,12 +390,18 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) break; tries--; elantech_debug("elantech.c: retrying read (%d).\n", - tries); + tries); msleep(ETP_READ_BACK_DELAY); } while (tries > 0); - if (rc) + + if (rc) { pr_err("elantech.c: failed to read back register 0x10.\n"); - break; + } else if (etd->hw_version == 1 && + !(val & ETP_R10_ABSOLUTE_MODE)) { + pr_err("elantech.c: touchpad refuses " + "to switch to absolute mode.\n"); + rc = -1; + } } if (rc) @@ -662,6 +685,17 @@ int elantech_init(struct psmouse *psmouse) param[0], param[1], param[2]); etd->capabilities = param[0]; + /* + * This firmware seems to suffer from misreporting coordinates when + * a touch action starts causing the mouse cursor or scrolled page + * to jump. Enable a workaround. + */ + if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) { + pr_info("elantech.c: firmware version 2.34 detected, " + "enabling jumpy cursor workaround\n"); + etd->jumpy_cursor = 1; + } + if (elantech_set_absolute_mode(psmouse)) { pr_err("elantech.c: failed to put touchpad into absolute mode.\n"); goto init_fail; diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index bee282b540bc..ed848cc80814 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -1,7 +1,7 @@ /* - * Elantech Touchpad driver (v5) + * Elantech Touchpad driver (v6) * - * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net> + * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -104,6 +104,7 @@ struct elantech_data { unsigned char fw_version_min; unsigned char hw_version; unsigned char paritycheck; + unsigned char jumpy_cursor; unsigned char parity[256]; }; diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index df81b0aaa9f8..15ac3205ac05 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -61,6 +61,12 @@ static const struct dmi_system_id lifebook_dmi_table[] = { }, }, { + .ident = "Lifebook B-2130", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"), + }, + }, + { .ident = "Lifebook B213x/B2150", .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"), diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c index 57953c0eb82f..f412c69478a8 100644 --- a/drivers/input/serio/sa1111ps2.c +++ b/drivers/input/serio/sa1111ps2.c @@ -77,7 +77,7 @@ static irqreturn_t ps2_txint(int irq, void *dev_id) spin_lock(&ps2if->lock); status = sa1111_readl(ps2if->base + SA1111_PS2STAT); if (ps2if->head == ps2if->tail) { - disable_irq(irq); + disable_irq_nosync(irq); /* done */ } else if (status & PS2STAT_TXE) { sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA); diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index 677680e9f54f..9710bfd49cf9 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -11,7 +11,7 @@ * Copyright (c) 2000 Daniel Egger <egger@suse.de> * Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com> * Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be> - * Copyright (c) 2002-2008 Ping Cheng <pingc@wacom.com> + * Copyright (c) 2002-2009 Ping Cheng <pingc@wacom.com> * * ChangeLog: * v0.1 (vp) - Initial release @@ -67,6 +67,7 @@ * v1.47 (pc) - Added support for Bamboo * v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A) + * v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28 */ /* @@ -87,7 +88,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.49" +#define DRIVER_VERSION "v1.50" #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>" #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 484496daa0f3..b8624f27abf9 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -289,6 +289,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi 5000); /* 5 secs */ } while (result < 0 && limit++ < 5); + /* No need to parse the Descriptor. It isn't an error though */ if (result < 0) goto out; @@ -368,9 +369,8 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi } } - result = 0; - out: + result = 0; kfree(report); return result; } @@ -425,6 +425,15 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i endpoint = &intf->cur_altsetting->endpoint[0].desc; + /* Initialize touch_x_max and touch_y_max in case it is not defined */ + if (wacom_wac->features->type == TABLETPC) { + features->touch_x_max = 1023; + features->touch_y_max = 1023; + } else { + features->touch_x_max = 0; + features->touch_y_max = 0; + } + /* TabletPC need to retrieve the physical and logical maximum from report descriptor */ if (wacom_wac->features->type == TABLETPC) { if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) { diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 4ab070246892..536668fbda22 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -235,7 +235,7 @@ static irqreturn_t tsc2007_irq(int irq, void *handle) spin_lock_irqsave(&ts->lock, flags); if (likely(ts->get_pendown_state())) { - disable_irq(ts->irq); + disable_irq_nosync(ts->irq); hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY), HRTIMER_MODE_REL); } diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index e868264fe799..f100c7f4c1db 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -256,7 +256,7 @@ static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid) struct ucb1400_ts *ucb = devid; if (irqnr == ucb->irq) { - disable_irq(ucb->irq); + disable_irq_nosync(ucb->irq); ucb->irq_pending = 1; wake_up(&ucb->ts_wait); return IRQ_HANDLED; diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 1fb91edc7de2..47c68bc75a17 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -986,6 +986,9 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start) oldindex = index; oldpage = page; + bitmap->filemap[bitmap->file_pages++] = page; + bitmap->last_page_size = count; + if (outofdate) { /* * if bitmap is out of date, dirty the @@ -998,15 +1001,9 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start) write_page(bitmap, page, 1); ret = -EIO; - if (bitmap->flags & BITMAP_WRITE_ERROR) { - /* release, page not in filemap yet */ - put_page(page); + if (bitmap->flags & BITMAP_WRITE_ERROR) goto err; - } } - - bitmap->filemap[bitmap->file_pages++] = page; - bitmap->last_page_size = count; } paddr = kmap_atomic(page, KM_USER0); if (bitmap->flags & BITMAP_HOSTENDIAN) @@ -1016,9 +1013,11 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start) kunmap_atomic(paddr, KM_USER0); if (b) { /* if the disk bit is set, set the memory bit */ - bitmap_set_memory_bits(bitmap, i << CHUNK_BLOCK_SHIFT(bitmap), - ((i+1) << (CHUNK_BLOCK_SHIFT(bitmap)) >= start) - ); + int needed = ((sector_t)(i+1) << (CHUNK_BLOCK_SHIFT(bitmap)) + >= start); + bitmap_set_memory_bits(bitmap, + (sector_t)i << CHUNK_BLOCK_SHIFT(bitmap), + needed); bit_cnt++; set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN); } @@ -1154,8 +1153,9 @@ void bitmap_daemon_work(struct bitmap *bitmap) spin_lock_irqsave(&bitmap->lock, flags); clear_page_attr(bitmap, page, BITMAP_PAGE_CLEAN); } - bmc = bitmap_get_counter(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap), - &blocks, 0); + bmc = bitmap_get_counter(bitmap, + (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap), + &blocks, 0); if (bmc) { /* if (j < 100) printk("bitmap: j=%lu, *bmc = 0x%x\n", j, *bmc); @@ -1169,7 +1169,8 @@ void bitmap_daemon_work(struct bitmap *bitmap) } else if (*bmc == 1) { /* we can clear the bit */ *bmc = 0; - bitmap_count_page(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap), + bitmap_count_page(bitmap, + (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap), -1); /* clear the bit */ @@ -1514,7 +1515,7 @@ void bitmap_dirty_bits(struct bitmap *bitmap, unsigned long s, unsigned long e) unsigned long chunk; for (chunk = s; chunk <= e; chunk++) { - sector_t sec = chunk << CHUNK_BLOCK_SHIFT(bitmap); + sector_t sec = (sector_t)chunk << CHUNK_BLOCK_SHIFT(bitmap); bitmap_set_memory_bits(bitmap, sec, 1); bitmap_file_set_bit(bitmap, sec); } diff --git a/drivers/md/md.c b/drivers/md/md.c index 612343fdde94..fccc8343a250 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3066,11 +3066,8 @@ array_state_store(mddev_t *mddev, const char *buf, size_t len) } else err = -EBUSY; spin_unlock_irq(&mddev->write_lock); - } else { - mddev->ro = 0; - mddev->recovery_cp = MaxSector; - err = do_md_run(mddev); - } + } else + err = -EINVAL; break; case active: if (mddev->pers) { @@ -4297,6 +4294,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) { int err = 0; struct gendisk *disk = mddev->gendisk; + mdk_rdev_t *rdev; if (atomic_read(&mddev->openers) > is_open) { printk("md: %s still in use.\n",mdname(mddev)); @@ -4339,6 +4337,13 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) /* tell userspace to handle 'inactive' */ sysfs_notify_dirent(mddev->sysfs_state); + list_for_each_entry(rdev, &mddev->disks, same_set) + if (rdev->raid_disk >= 0) { + char nm[20]; + sprintf(nm, "rd%d", rdev->raid_disk); + sysfs_remove_link(&mddev->kobj, nm); + } + set_capacity(disk, 0); mddev->changed = 1; @@ -4359,7 +4364,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) * Free resources if final stop */ if (mode == 0) { - mdk_rdev_t *rdev; printk(KERN_INFO "md: %s stopped.\n", mdname(mddev)); @@ -4371,13 +4375,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) } mddev->bitmap_offset = 0; - list_for_each_entry(rdev, &mddev->disks, same_set) - if (rdev->raid_disk >= 0) { - char nm[20]; - sprintf(nm, "rd%d", rdev->raid_disk); - sysfs_remove_link(&mddev->kobj, nm); - } - /* make sure all md_delayed_delete calls have finished */ flush_scheduled_work(); @@ -5705,37 +5702,38 @@ static void status_unused(struct seq_file *seq) static void status_resync(struct seq_file *seq, mddev_t * mddev) { - sector_t max_blocks, resync, res; - unsigned long dt, db, rt; + sector_t max_sectors, resync, res; + unsigned long dt, db; + sector_t rt; int scale; unsigned int per_milli; - resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active))/2; + resync = mddev->curr_resync - atomic_read(&mddev->recovery_active); if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) - max_blocks = mddev->resync_max_sectors >> 1; + max_sectors = mddev->resync_max_sectors; else - max_blocks = mddev->dev_sectors / 2; + max_sectors = mddev->dev_sectors; /* * Should not happen. */ - if (!max_blocks) { + if (!max_sectors) { MD_BUG(); return; } /* Pick 'scale' such that (resync>>scale)*1000 will fit - * in a sector_t, and (max_blocks>>scale) will fit in a + * in a sector_t, and (max_sectors>>scale) will fit in a * u32, as those are the requirements for sector_div. * Thus 'scale' must be at least 10 */ scale = 10; if (sizeof(sector_t) > sizeof(unsigned long)) { - while ( max_blocks/2 > (1ULL<<(scale+32))) + while ( max_sectors/2 > (1ULL<<(scale+32))) scale++; } res = (resync>>scale)*1000; - sector_div(res, (u32)((max_blocks>>scale)+1)); + sector_div(res, (u32)((max_sectors>>scale)+1)); per_milli = res; { @@ -5756,25 +5754,35 @@ static void status_resync(struct seq_file *seq, mddev_t * mddev) (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ? "resync" : "recovery"))), per_milli/10, per_milli % 10, - (unsigned long long) resync, - (unsigned long long) max_blocks); + (unsigned long long) resync/2, + (unsigned long long) max_sectors/2); /* - * We do not want to overflow, so the order of operands and - * the * 100 / 100 trick are important. We do a +1 to be - * safe against division by zero. We only estimate anyway. - * * dt: time from mark until now * db: blocks written from mark until now * rt: remaining time + * + * rt is a sector_t, so could be 32bit or 64bit. + * So we divide before multiply in case it is 32bit and close + * to the limit. + * We scale the divisor (db) by 32 to avoid loosing precision + * near the end of resync when the number of remaining sectors + * is close to 'db'. + * We then divide rt by 32 after multiplying by db to compensate. + * The '+1' avoids division by zero if db is very small. */ dt = ((jiffies - mddev->resync_mark) / HZ); if (!dt) dt++; db = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active)) - mddev->resync_mark_cnt; - rt = (dt * ((unsigned long)(max_blocks-resync) / (db/2/100+1)))/100; - seq_printf(seq, " finish=%lu.%lumin", rt / 60, (rt % 60)/6); + rt = max_sectors - resync; /* number of remaining sectors */ + sector_div(rt, db/32+1); + rt *= dt; + rt >>= 5; + + seq_printf(seq, " finish=%lu.%lumin", (unsigned long)rt / 60, + ((unsigned long)rt % 60)/6); seq_printf(seq, " speed=%ldK/sec", db/2/dt); } @@ -5965,7 +5973,7 @@ static int md_seq_show(struct seq_file *seq, void *v) return 0; } -static struct seq_operations md_seq_ops = { +static const struct seq_operations md_seq_ops = { .start = md_seq_start, .next = md_seq_next, .stop = md_seq_stop, diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 81a54f17417e..499620afb44b 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1809,17 +1809,17 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i r10_bio->sector = sect; raid10_find_phys(conf, r10_bio); - /* Need to check if this section will still be + + /* Need to check if the array will still be * degraded */ - for (j=0; j<conf->copies;j++) { - int d = r10_bio->devs[j].devnum; - if (conf->mirrors[d].rdev == NULL || - test_bit(Faulty, &conf->mirrors[d].rdev->flags)) { + for (j=0; j<conf->raid_disks; j++) + if (conf->mirrors[j].rdev == NULL || + test_bit(Faulty, &conf->mirrors[j].rdev->flags)) { still_degraded = 1; break; } - } + must_sync = bitmap_start_sync(mddev->bitmap, sect, &sync_blocks, still_degraded); diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c index 2e2a5923d4c2..a71e245801ee 100644 --- a/drivers/misc/isl29003.c +++ b/drivers/misc/isl29003.c @@ -64,6 +64,7 @@ struct isl29003_data { struct i2c_client *client; struct mutex lock; u8 reg_cache[ISL29003_NUM_CACHABLE_REGS]; + u8 power_state_before_suspend; }; static int gain_range[] = { @@ -411,6 +412,9 @@ static int __devexit isl29003_remove(struct i2c_client *client) #ifdef CONFIG_PM static int isl29003_suspend(struct i2c_client *client, pm_message_t mesg) { + struct isl29003_data *data = i2c_get_clientdata(client); + + data->power_state_before_suspend = isl29003_get_power_state(client); return isl29003_set_power_state(client, 0); } @@ -421,10 +425,11 @@ static int isl29003_resume(struct i2c_client *client) /* restore registers from cache */ for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++) - if (!i2c_smbus_write_byte_data(client, i, data->reg_cache[i])) + if (i2c_smbus_write_byte_data(client, i, data->reg_cache[i])) return -EIO; - return 0; + return isl29003_set_power_state(client, + data->power_state_before_suspend); } #else diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index fe8041e619ea..b25e9b6516ae 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -254,6 +254,14 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.data.blocks = req->nr_sectors; /* + * The block layer doesn't support all sector count + * restrictions, so we need to be prepared for too big + * requests. + */ + if (brq.data.blocks > card->host->max_blk_count) + brq.data.blocks = card->host->max_blk_count; + + /* * After a read error, we redo the request one sector at a time * in order to accurately determine which sectors can be read * successfully. diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index fa073ab3fa34..264911732756 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -706,7 +706,7 @@ static void mmc_power_up(struct mmc_host *host) * This delay should be sufficient to allow the power supply * to reach the minimum voltage. */ - mmc_delay(2); + mmc_delay(10); host->ios.clock = host->f_min; host->ios.power_mode = MMC_POWER_ON; @@ -716,7 +716,7 @@ static void mmc_power_up(struct mmc_host *host) * This delay must be at least 74 clock sizes, or 1 ms, or the * time required to reach a stable voltage. */ - mmc_delay(2); + mmc_delay(10); } static void mmc_power_off(struct mmc_host *host) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index a663429b3d55..36875dcfa492 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -514,6 +514,7 @@ static int __devinit mmci_probe(struct amba_device *dev, void *id) } host = mmc_priv(mmc); + host->mmc = mmc; /* Bits 12 thru 19 is the designer */ host->hw_designer = (dev->periphid >> 12) & 0xff; /* Bits 20 thru 23 is the revison */ @@ -545,7 +546,6 @@ static int __devinit mmci_probe(struct amba_device *dev, void *id) host->mclk = clk_get_rate(host->clk); DBG(host, "eventual mclk rate: %u Hz\n", host->mclk); } - host->mmc = mmc; host->base = ioremap(dev->res.start, SZ_4K); if (!host->base) { ret = -ENOMEM; diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index b5c375d94ab3..c643d0fe118f 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -825,24 +825,23 @@ static int __exit mvsd_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int mvsd_suspend(struct platform_device *dev, pm_message_t state, - u32 level) +static int mvsd_suspend(struct platform_device *dev, pm_message_t state) { struct mmc_host *mmc = platform_get_drvdata(dev); int ret = 0; - if (mmc && level == SUSPEND_DISABLE) + if (mmc) ret = mmc_suspend_host(mmc, state); return ret; } -static int mvsd_resume(struct platform_device *dev, u32 level) +static int mvsd_resume(struct platform_device *dev) { - struct mmc_host *mmc = platform_dev_get_drvdata(dev); + struct mmc_host *mmc = platform_get_drvdata(dev); int ret = 0; - if (mmc && level == RESUME_ENABLE) + if (mmc) ret = mmc_resume_host(mmc); return ret; diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 5570849188cc..bfa25c01c872 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -157,8 +157,6 @@ struct mmc_omap_host { struct timer_list dma_timer; unsigned dma_len; - short power_pin; - struct mmc_omap_slot *slots[OMAP_MMC_MAX_SLOTS]; struct mmc_omap_slot *current_slot; spinlock_t slot_lock; diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index cd37962ec44f..65be27995d5c 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -522,8 +522,8 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot)); if (IS_ERR(host)) { - ret = PTR_ERR(host); - goto unmap; + dev_err(&pdev->dev, "cannot allocate host\n"); + return ERR_PTR(PTR_ERR(host)); } slot = sdhci_priv(host); @@ -541,7 +541,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc)); if (ret) { dev_err(&pdev->dev, "cannot request region\n"); - return ERR_PTR(ret); + goto free; } addr = pci_resource_start(pdev, bar); @@ -572,6 +572,8 @@ unmap: release: pci_release_region(pdev, bar); + +free: sdhci_free_host(host); return ERR_PTR(ret); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index f20a834f4309..65c6f996bbd3 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -125,7 +125,7 @@ #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ - SDHCI_INT_DATA_END_BIT) + SDHCI_INT_DATA_END_BIT | SDHCI_ADMA_ERROR) #define SDHCI_INT_ALL_MASK ((unsigned int)-1) #define SDHCI_ACMD12_ERR 0x3C diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 553a89919778..46d312bedfb8 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -1706,10 +1706,8 @@ void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave * Called with RTNL */ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) - __releases(&bond->curr_slave_lock) - __releases(&bond->lock) __acquires(&bond->lock) - __acquires(&bond->curr_slave_lock) + __releases(&bond->lock) { struct bonding *bond = netdev_priv(bond_dev); struct sockaddr *sa = addr; @@ -1745,9 +1743,6 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) } } - write_unlock_bh(&bond->curr_slave_lock); - read_unlock(&bond->lock); - if (swap_slave) { alb_swap_mac_addr(bond, swap_slave, bond->curr_active_slave); alb_fasten_mac_swap(bond, swap_slave, bond->curr_active_slave); @@ -1755,16 +1750,15 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr, bond->alb_info.rlb_enabled); + read_lock(&bond->lock); alb_send_learning_packets(bond->curr_active_slave, bond_dev->dev_addr); if (bond->alb_info.rlb_enabled) { /* inform clients mac address has changed */ rlb_req_update_slave_clients(bond, bond->curr_active_slave); } + read_unlock(&bond->lock); } - read_lock(&bond->lock); - write_lock_bh(&bond->curr_slave_lock); - return 0; } diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 63369b6b14d4..2188a96fc090 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2213,33 +2213,24 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in { struct bonding *bond = netdev_priv(bond_dev); struct slave *slave; - int i, found = 0; - - if (info->slave_id < 0) { - return -ENODEV; - } + int i, res = -ENODEV; read_lock(&bond->lock); bond_for_each_slave(bond, slave, i) { if (i == (int)info->slave_id) { - found = 1; + res = 0; + strcpy(info->slave_name, slave->dev->name); + info->link = slave->link; + info->state = slave->state; + info->link_failure_count = slave->link_failure_count; break; } } read_unlock(&bond->lock); - if (found) { - strcpy(info->slave_name, slave->dev->name); - info->link = slave->link; - info->state = slave->state; - info->link_failure_count = slave->link_failure_count; - } else { - return -ENODEV; - } - - return 0; + return res; } /*-------------------------------- Monitoring -------------------------------*/ @@ -5167,16 +5158,15 @@ int bond_create(char *name, struct bond_params *params) up_write(&bonding_rwsem); rtnl_unlock(); /* allows sysfs registration of net device */ res = bond_create_sysfs_entry(netdev_priv(bond_dev)); - if (res < 0) { - rtnl_lock(); - down_write(&bonding_rwsem); - bond_deinit(bond_dev); - unregister_netdevice(bond_dev); - goto out_rtnl; - } + if (res < 0) + goto out_unreg; return 0; +out_unreg: + rtnl_lock(); + down_write(&bonding_rwsem); + unregister_netdevice(bond_dev); out_bond: bond_deinit(bond_dev); out_netdev: diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index e1bd690ff831..4f68aeb2679a 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -3779,7 +3779,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, adapter->params.info = ai; adapter->params.nports = ai->nports0 + ai->nports1; - adapter->params.chan_map = !!ai->nports0 | (!!ai->nports1 << 1); + adapter->params.chan_map = (!!ai->nports0) | (!!ai->nports1 << 1); adapter->params.rev = t3_read_reg(adapter, A_PL_REV); /* * We used to only run the "adapter check task" once a second if diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 6a46ceed9436..b1419e21b46b 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3738,7 +3738,7 @@ static irqreturn_t e1000_intr(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 rctl, icr = er32(ICR); - if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags))) + if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags))) return IRQ_NONE; /* Not our interrupt */ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 6e317caf429c..16a41389575a 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -40,7 +40,7 @@ #include <asm/io.h> #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0100" +#define DRV_VERSION "EHEA_0101" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 604c844d0769..b22dab9153f6 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -545,14 +545,17 @@ static inline struct sk_buff *get_skb_by_index(struct sk_buff **skb_array, x &= (arr_len - 1); pref = skb_array[x]; - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); - - pref = (skb_array[x]->data); - prefetch(pref); - prefetch(pref + EHEA_CACHE_LINE); - prefetch(pref + EHEA_CACHE_LINE * 2); - prefetch(pref + EHEA_CACHE_LINE * 3); + if (pref) { + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); + + pref = (skb_array[x]->data); + prefetch(pref); + prefetch(pref + EHEA_CACHE_LINE); + prefetch(pref + EHEA_CACHE_LINE * 2); + prefetch(pref + EHEA_CACHE_LINE * 3); + } + skb = skb_array[skb_index]; skb_array[skb_index] = NULL; return skb; @@ -569,12 +572,14 @@ static inline struct sk_buff *get_skb_by_index_ll(struct sk_buff **skb_array, x &= (arr_len - 1); pref = skb_array[x]; - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); + if (pref) { + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); - pref = (skb_array[x]->data); - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); + pref = (skb_array[x]->data); + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); + } skb = skb_array[wqe_index]; skb_array[wqe_index] = NULL; diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index b3185bf2c158..a400d7115f78 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -393,12 +393,12 @@ struct mv643xx_eth_private { struct work_struct tx_timeout_task; struct napi_struct napi; + u8 oom; u8 work_link; u8 work_tx; u8 work_tx_end; u8 work_rx; u8 work_rx_refill; - u8 work_rx_oom; int skb_size; struct sk_buff_head rx_recycle; @@ -661,7 +661,7 @@ static int rxq_refill(struct rx_queue *rxq, int budget) dma_get_cache_alignment() - 1); if (skb == NULL) { - mp->work_rx_oom |= 1 << rxq->index; + mp->oom = 1; goto oom; } @@ -1255,7 +1255,6 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) spin_lock_bh(&mp->mib_counters_lock); p->good_octets_received += mib_read(mp, 0x00); - p->good_octets_received += (u64)mib_read(mp, 0x04) << 32; p->bad_octets_received += mib_read(mp, 0x08); p->internal_mac_transmit_err += mib_read(mp, 0x0c); p->good_frames_received += mib_read(mp, 0x10); @@ -1269,7 +1268,6 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) p->frames_512_to_1023_octets += mib_read(mp, 0x30); p->frames_1024_to_max_octets += mib_read(mp, 0x34); p->good_octets_sent += mib_read(mp, 0x38); - p->good_octets_sent += (u64)mib_read(mp, 0x3c) << 32; p->good_frames_sent += mib_read(mp, 0x40); p->excessive_collision += mib_read(mp, 0x44); p->multicast_frames_sent += mib_read(mp, 0x48); @@ -2167,8 +2165,10 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) mp = container_of(napi, struct mv643xx_eth_private, napi); - mp->work_rx_refill |= mp->work_rx_oom; - mp->work_rx_oom = 0; + if (unlikely(mp->oom)) { + mp->oom = 0; + del_timer(&mp->rx_oom); + } work_done = 0; while (work_done < budget) { @@ -2182,8 +2182,10 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) continue; } - queue_mask = mp->work_tx | mp->work_tx_end | - mp->work_rx | mp->work_rx_refill; + queue_mask = mp->work_tx | mp->work_tx_end | mp->work_rx; + if (likely(!mp->oom)) + queue_mask |= mp->work_rx_refill; + if (!queue_mask) { if (mv643xx_eth_collect_events(mp)) continue; @@ -2204,7 +2206,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) txq_maybe_wake(mp->txq + queue); } else if (mp->work_rx & queue_mask) { work_done += rxq_process(mp->rxq + queue, work_tbd); - } else if (mp->work_rx_refill & queue_mask) { + } else if (!mp->oom && (mp->work_rx_refill & queue_mask)) { work_done += rxq_refill(mp->rxq + queue, work_tbd); } else { BUG(); @@ -2212,7 +2214,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) } if (work_done < budget) { - if (mp->work_rx_oom) + if (mp->oom) mod_timer(&mp->rx_oom, jiffies + (HZ / 10)); napi_complete(napi); wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT); @@ -2372,7 +2374,7 @@ static int mv643xx_eth_open(struct net_device *dev) rxq_refill(mp->rxq + i, INT_MAX); } - if (mp->work_rx_oom) { + if (mp->oom) { mp->rx_oom.expires = jiffies + (HZ / 10); add_timer(&mp->rx_oom); } diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c index eb66f658f9d1..7d83896b8c26 100644 --- a/drivers/net/ne2k-pci.c +++ b/drivers/net/ne2k-pci.c @@ -374,18 +374,17 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, dev->ethtool_ops = &ne2k_pci_ethtool_ops; NS8390_init(dev, 0); + memcpy(dev->dev_addr, SA_prom, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + i = register_netdev(dev); if (i) goto err_out_free_netdev; - for(i = 0; i < 6; i++) - dev->dev_addr[i] = SA_prom[i]; printk("%s: %s found at %#lx, IRQ %d, %pM.\n", dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq, dev->dev_addr); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - return 0; err_out_free_netdev: diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index eceadf787a67..bf4af5248cb7 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -664,7 +664,7 @@ static int netconsole_netdev_event(struct notifier_block *this, struct netconsole_target *nt; struct net_device *dev = ptr; - if (!(event == NETDEV_CHANGENAME)) + if (!(event == NETDEV_CHANGENAME || event == NETDEV_UNREGISTER)) goto done; spin_lock_irqsave(&target_list_lock, flags); @@ -675,6 +675,15 @@ static int netconsole_netdev_event(struct notifier_block *this, case NETDEV_CHANGENAME: strlcpy(nt->np.dev_name, dev->name, IFNAMSIZ); break; + case NETDEV_UNREGISTER: + if (!nt->enabled) + break; + netpoll_cleanup(&nt->np); + nt->enabled = 0; + printk(KERN_INFO "netconsole: network logging stopped" + ", interface %s unregistered\n", + dev->name); + break; } } netconsole_target_put(nt); diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 8ee21030e9ac..dfc6cf765fbd 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -180,6 +180,20 @@ config USB_NET_CDCETHER IEEE 802 "local assignment" bit is set in the address, a "usbX" name is used instead. +config USB_NET_CDC_EEM + tristate "CDC EEM support" + depends on USB_USBNET && EXPERIMENTAL + help + This option supports devices conforming to the Communication Device + Class (CDC) Ethernet Emulation Model, a specification that's easy to + implement in device firmware. The CDC EEM specifications are available + from <http://www.usb.org/>. + + This driver creates an interface named "ethX", where X depends on + what other networking devices you have in use. However, if the + IEEE 802 "local assignment" bit is set in the address, a "usbX" + name is used instead. + config USB_NET_DM9601 tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices" depends on USB_USBNET diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index 88a87eeb376a..c8aef62cf2b7 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_USB_RTL8150) += rtl8150.o obj-$(CONFIG_USB_HSO) += hso.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o +obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o obj-$(CONFIG_USB_NET_GL620A) += gl620a.o diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c new file mode 100644 index 000000000000..80e01778dd3b --- /dev/null +++ b/drivers/net/usb/cdc_eem.c @@ -0,0 +1,381 @@ +/* + * USB CDC EEM network interface driver + * Copyright (C) 2009 Oberthur Technologies + * by Omar Laazimani, Olivier Condemine + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ctype.h> +#include <linux/ethtool.h> +#include <linux/workqueue.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/crc32.h> +#include <linux/usb/cdc.h> +#include <linux/usb/usbnet.h> + + +/* + * This driver is an implementation of the CDC "Ethernet Emulation + * Model" (EEM) specification, which encapsulates Ethernet frames + * for transport over USB using a simpler USB device model than the + * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet"). + * + * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf + * + * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24, + * 2.6.27 and 2.6.30rc2 kernel. + * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel). + * build on 23-April-2009 + */ + +#define EEM_HEAD 2 /* 2 byte header */ + +/*-------------------------------------------------------------------------*/ + +static void eem_linkcmd_complete(struct urb *urb) +{ + dev_kfree_skb(urb->context); + usb_free_urb(urb); +} + +static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb) +{ + struct urb *urb; + int status; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) + goto fail; + + usb_fill_bulk_urb(urb, dev->udev, dev->out, + skb->data, skb->len, eem_linkcmd_complete, skb); + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + usb_free_urb(urb); +fail: + dev_kfree_skb(skb); + devwarn(dev, "link cmd failure\n"); + return; + } +} + +static int eem_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status = 0; + + status = usbnet_get_endpoints(dev, intf); + if (status < 0) { + usb_set_intfdata(intf, NULL); + usb_driver_release_interface(driver_of(intf), intf); + return status; + } + + /* no jumbogram (16K) support for now */ + + dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN; + + return 0; +} + +/* + * EEM permits packing multiple Ethernet frames into USB transfers + * (a "bundle"), but for TX we don't try to do that. + */ +static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + struct sk_buff *skb2 = NULL; + u16 len = skb->len; + u32 crc = 0; + int padlen = 0; + + /* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is + * zero, stick two bytes of zero length EEM packet on the end. + * Else the framework would add invalid single byte padding, + * since it can't know whether ZLPs will be handled right by + * all the relevant hardware and software. + */ + if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket)) + padlen += 2; + + if (!skb_cloned(skb)) { + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + + if ((tailroom >= ETH_FCS_LEN + padlen) + && (headroom >= EEM_HEAD)) + goto done; + + if ((headroom + tailroom) + > (EEM_HEAD + ETH_FCS_LEN + padlen)) { + skb->data = memmove(skb->head + + EEM_HEAD, + skb->data, + skb->len); + skb_set_tail_pointer(skb, len); + goto done; + } + } + + skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags); + if (!skb2) + return NULL; + + dev_kfree_skb_any(skb); + skb = skb2; + +done: + /* we don't use the "no Ethernet CRC" option */ + crc = crc32_le(~0, skb->data, skb->len); + crc = ~crc; + + put_unaligned_le32(crc, skb_put(skb, 4)); + + /* EEM packet header format: + * b0..13: length of ethernet frame + * b14: bmCRC (1 == valid Ethernet CRC) + * b15: bmType (0 == data) + */ + len = skb->len; + put_unaligned_le16(BIT(14) | len, skb_push(skb, 2)); + + /* Bundle a zero length EEM packet if needed */ + if (padlen) + put_unaligned_le16(0, skb_put(skb, 2)); + + return skb; +} + +static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + /* + * Our task here is to strip off framing, leaving skb with one + * data frame for the usbnet framework code to process. But we + * may have received multiple EEM payloads, or command payloads. + * So we must process _everything_ as if it's a header, except + * maybe the last data payload + * + * REVISIT the framework needs updating so that when we consume + * all payloads (the last or only message was a command, or a + * zero length EEM packet) that is not accounted as an rx_error. + */ + do { + struct sk_buff *skb2 = NULL; + u16 header; + u16 len = 0; + + /* incomplete EEM header? */ + if (skb->len < EEM_HEAD) + return 0; + + /* + * EEM packet header format: + * b0..14: EEM type dependant (Data or Command) + * b15: bmType + */ + header = get_unaligned_le16(skb->data); + skb_pull(skb, EEM_HEAD); + + /* + * The bmType bit helps to denote when EEM + * packet is data or command : + * bmType = 0 : EEM data payload + * bmType = 1 : EEM (link) command + */ + if (header & BIT(15)) { + u16 bmEEMCmd; + + /* + * EEM (link) command packet: + * b0..10: bmEEMCmdParam + * b11..13: bmEEMCmd + * b14: bmReserved (must be 0) + * b15: 1 (EEM command) + */ + if (header & BIT(14)) { + devdbg(dev, "reserved command %04x\n", header); + continue; + } + + bmEEMCmd = (header >> 11) & 0x7; + switch (bmEEMCmd) { + + /* Responding to echo requests is mandatory. */ + case 0: /* Echo command */ + len = header & 0x7FF; + + /* bogus command? */ + if (skb->len < len) + return 0; + + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + goto next; + skb_trim(skb2, len); + put_unaligned_le16(BIT(15) | (1 << 11) | len, + skb_push(skb2, 2)); + eem_linkcmd(dev, skb2); + break; + + /* + * Host may choose to ignore hints. + * - suspend: peripheral ready to suspend + * - response: suggest N millisec polling + * - response complete: suggest N sec polling + */ + case 2: /* Suspend hint */ + case 3: /* Response hint */ + case 4: /* Response complete hint */ + continue; + + /* + * Hosts should never receive host-to-peripheral + * or reserved command codes; or responses to an + * echo command we didn't send. + */ + case 1: /* Echo response */ + case 5: /* Tickle */ + default: /* reserved */ + devwarn(dev, "unexpected link command %d\n", + bmEEMCmd); + continue; + } + + } else { + u32 crc, crc2; + int is_last; + + /* zero length EEM packet? */ + if (header == 0) + continue; + + /* + * EEM data packet header : + * b0..13: length of ethernet frame + * b14: bmCRC + * b15: 0 (EEM data) + */ + len = header & 0x3FFF; + + /* bogus EEM payload? */ + if (skb->len < len) + return 0; + + /* bogus ethernet frame? */ + if (len < (ETH_HLEN + ETH_FCS_LEN)) + goto next; + + /* + * Treat the last payload differently: framework + * code expects our "fixup" to have stripped off + * headers, so "skb" is a data packet (or error). + * Else if it's not the last payload, keep "skb" + * for further processing. + */ + is_last = (len == skb->len); + if (is_last) + skb2 = skb; + else { + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + return 0; + } + + crc = get_unaligned_le32(skb2->data + + len - ETH_FCS_LEN); + skb_trim(skb2, len - ETH_FCS_LEN); + + /* + * The bmCRC helps to denote when the CRC field in + * the Ethernet frame contains a calculated CRC: + * bmCRC = 1 : CRC is calculated + * bmCRC = 0 : CRC = 0xDEADBEEF + */ + if (header & BIT(14)) + crc2 = ~crc32_le(~0, skb2->data, len); + else + crc2 = 0xdeadbeef; + + if (is_last) + return crc == crc2; + + if (unlikely(crc != crc2)) { + dev->stats.rx_errors++; + dev_kfree_skb_any(skb2); + } else + usbnet_skb_return(dev, skb2); + } + +next: + skb_pull(skb, len); + } while (skb->len); + + return 1; +} + +static const struct driver_info eem_info = { + .description = "CDC EEM Device", + .flags = FLAG_ETHER, + .bind = eem_bind, + .rx_fixup = eem_rx_fixup, + .tx_fixup = eem_tx_fixup, +}; + +/*-------------------------------------------------------------------------*/ + +static const struct usb_device_id products[] = { +{ + USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM, + USB_CDC_PROTO_EEM), + .driver_info = (unsigned long) &eem_info, +}, +{ + /* EMPTY == end of list */ +}, +}; +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver eem_driver = { + .name = "cdc_eem", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, +}; + + +static int __init eem_init(void) +{ + return usb_register(&eem_driver); +} +module_init(eem_init); + +static void __exit eem_exit(void) +{ + usb_deregister(&eem_driver); +} +module_exit(eem_exit); + +MODULE_AUTHOR("Omar Laazimani <omar.oberthur@gmail.com>"); +MODULE_DESCRIPTION("USB CDC EEM"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index dc1665326592..5a7283372b53 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -941,6 +941,16 @@ static int smsc95xx_reset(struct usbnet *dev) if (netif_msg_ifup(dev)) devdbg(dev, "ID_REV = 0x%08x", read_buf); + /* Configure GPIO pins as LED outputs */ + write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED | + LED_GPIO_CFG_FDX_LED; + ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf); + if (ret < 0) { + devwarn(dev, "Failed to write LED_GPIO_CFG register, ret=%d", + ret); + return ret; + } + /* Init Tx */ write_buf = 0; ret = smsc95xx_write_reg(dev, FLOW, write_buf); @@ -1231,6 +1241,11 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0424, 0x9500), .driver_info = (unsigned long) &smsc95xx_info, }, + { + /* SMSC9512/9514 USB Hub & Ethernet Device */ + USB_DEVICE(0x0424, 0xec00), + .driver_info = (unsigned long) &smsc95xx_info, + }, { }, /* END */ }; MODULE_DEVICE_TABLE(usb, products); diff --git a/drivers/net/usb/smsc95xx.h b/drivers/net/usb/smsc95xx.h index 66b5c84f302e..86bc44977fbd 100644 --- a/drivers/net/usb/smsc95xx.h +++ b/drivers/net/usb/smsc95xx.h @@ -99,6 +99,9 @@ #define PM_CTL_WUPS_MULTI_ (0x00000003) #define LED_GPIO_CFG (0x24) +#define LED_GPIO_CFG_SPD_LED (0x01000000) +#define LED_GPIO_CFG_LNK_LED (0x00100000) +#define LED_GPIO_CFG_FDX_LED (0x00010000) #define GPIO_CFG (0x28) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 9c82a39497e5..4d1d47953fc6 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -616,10 +616,11 @@ static int virtnet_open(struct net_device *dev) static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, struct scatterlist *data, int out, int in) { - struct scatterlist sg[VIRTNET_SEND_COMMAND_SG_MAX + 2]; + struct scatterlist *s, sg[VIRTNET_SEND_COMMAND_SG_MAX + 2]; struct virtio_net_ctrl_hdr ctrl; virtio_net_ctrl_ack status = ~0; unsigned int tmp; + int i; if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) { BUG(); /* Caller should know better */ @@ -637,7 +638,8 @@ static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, sg_init_table(sg, out + in); sg_set_buf(&sg[0], &ctrl, sizeof(ctrl)); - memcpy(&sg[1], data, sizeof(struct scatterlist) * (out + in - 2)); + for_each_sg(data, s, out + in - 2, i) + sg_set_buf(&sg[i + 1], sg_virt(s), s->length); sg_set_buf(&sg[out + in - 1], &status, sizeof(status)); if (vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi) != 0) @@ -692,7 +694,7 @@ static void virtnet_set_rx_mode(struct net_device *dev) promisc = ((dev->flags & IFF_PROMISC) != 0); allmulti = ((dev->flags & IFF_ALLMULTI) != 0); - sg_set_buf(sg, &promisc, sizeof(promisc)); + sg_init_one(sg, &promisc, sizeof(promisc)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX, VIRTIO_NET_CTRL_RX_PROMISC, @@ -700,7 +702,7 @@ static void virtnet_set_rx_mode(struct net_device *dev) dev_warn(&dev->dev, "Failed to %sable promisc mode.\n", promisc ? "en" : "dis"); - sg_set_buf(sg, &allmulti, sizeof(allmulti)); + sg_init_one(sg, &allmulti, sizeof(allmulti)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX, VIRTIO_NET_CTRL_RX_ALLMULTI, @@ -716,6 +718,8 @@ static void virtnet_set_rx_mode(struct net_device *dev) return; } + sg_init_table(sg, 2); + /* Store the unicast list and count in the front of the buffer */ mac_data->entries = dev->uc_count; addr = dev->uc_list; @@ -744,24 +748,24 @@ static void virtnet_set_rx_mode(struct net_device *dev) kfree(buf); } -static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) +static void virtnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) { struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; - sg_set_buf(&sg, &vid, sizeof(vid)); + sg_init_one(&sg, &vid, sizeof(vid)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN, VIRTIO_NET_CTRL_VLAN_ADD, &sg, 1, 0)) dev_warn(&dev->dev, "Failed to add VLAN ID %d.\n", vid); } -static void virnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) +static void virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) { struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; - sg_set_buf(&sg, &vid, sizeof(vid)); + sg_init_one(&sg, &vid, sizeof(vid)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN, VIRTIO_NET_CTRL_VLAN_DEL, &sg, 1, 0)) @@ -794,8 +798,8 @@ static const struct net_device_ops virtnet_netdev = { .ndo_set_mac_address = virtnet_set_mac_address, .ndo_set_rx_mode = virtnet_set_rx_mode, .ndo_change_mtu = virtnet_change_mtu, - .ndo_vlan_rx_add_vid = virnet_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = virnet_vlan_rx_kill_vid, + .ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = virtnet_netpoll, #endif diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 9770bb3d40f9..4904a07e4b59 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -424,7 +424,7 @@ ath5k_debug_dump_bands(struct ath5k_softc *sc) for (b = 0; b < IEEE80211_NUM_BANDS; b++) { struct ieee80211_supported_band *band = &sc->sbands[b]; - char bname[5]; + char bname[6]; switch (band->band) { case IEEE80211_BAND_2GHZ: strcpy(bname, "2 GHz"); diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 23644cf884f1..e7c65c4f741b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -925,11 +925,11 @@ void iwl_bg_scan_completed(struct work_struct *work) IWL_DEBUG_SCAN(priv, "SCAN complete scan\n"); + ieee80211_scan_completed(priv->hw, false); + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - ieee80211_scan_completed(priv->hw, false); - /* Since setting the TXPOWER may have been deferred while * performing the scan, fire one off */ mutex_lock(&priv->mutex); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 617c4235d971..70a00c8ee42e 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1694,7 +1694,6 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) rxq->free_count = 0; spin_unlock_irqrestore(&rxq->lock, flags); } -EXPORT_SYMBOL(iwl3945_rx_queue_reset); /* * this should be called while priv->lock is locked diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index db91db776508..bebf735cd4bd 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2558,6 +2558,11 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf) mutex_init(&priv->command_lock); spin_lock_init(&priv->stats_lock); + /* because rndis_command() sleeps we need to use workqueue */ + priv->workqueue = create_singlethread_workqueue("rndis_wlan"); + INIT_WORK(&priv->work, rndis_wext_worker); + INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats); + /* try bind rndis_host */ retval = generic_rndis_bind(usbdev, intf, FLAG_RNDIS_PHYM_WIRELESS); if (retval < 0) @@ -2603,16 +2608,17 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf) disassociate(usbdev, 1); netif_carrier_off(usbdev->net); - /* because rndis_command() sleeps we need to use workqueue */ - priv->workqueue = create_singlethread_workqueue("rndis_wlan"); - INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats); queue_delayed_work(priv->workqueue, &priv->stats_work, round_jiffies_relative(STATS_UPDATE_JIFFIES)); - INIT_WORK(&priv->work, rndis_wext_worker); return 0; fail: + cancel_delayed_work_sync(&priv->stats_work); + cancel_work_sync(&priv->work); + flush_workqueue(priv->workqueue); + destroy_workqueue(priv->workqueue); + kfree(priv); return retval; } diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 616c60ffcf2c..3ac27ee47396 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -97,9 +97,7 @@ static void __init zfcp_init_device_configure(char *busid, u64 wwpn, u64 lun) ccw_device_set_online(adapter->ccw_device); zfcp_erp_wait(adapter); - wait_event(adapter->erp_done_wqh, - !(atomic_read(&unit->status) & - ZFCP_STATUS_UNIT_SCSI_WORK_PENDING)); + flush_work(&unit->scsi_work); down(&zfcp_data.config_sema); zfcp_unit_put(unit); @@ -279,6 +277,7 @@ struct zfcp_unit *zfcp_unit_enqueue(struct zfcp_port *port, u64 fcp_lun) atomic_set(&unit->refcount, 0); init_waitqueue_head(&unit->remove_wq); + INIT_WORK(&unit->scsi_work, zfcp_scsi_scan); unit->port = port; unit->fcp_lun = fcp_lun; @@ -525,6 +524,8 @@ int zfcp_adapter_enqueue(struct ccw_device *ccw_device) atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status); + zfcp_fc_nameserver_init(adapter); + if (!zfcp_adapter_scsi_register(adapter)) return 0; @@ -553,7 +554,6 @@ void zfcp_adapter_dequeue(struct zfcp_adapter *adapter) cancel_work_sync(&adapter->scan_work); cancel_work_sync(&adapter->stat_work); - cancel_delayed_work_sync(&adapter->nsp.work); zfcp_adapter_scsi_unregister(adapter); sysfs_remove_group(&adapter->ccw_device->dev.kobj, &zfcp_sysfs_adapter_attrs); @@ -671,8 +671,7 @@ void zfcp_port_dequeue(struct zfcp_port *port) list_del(&port->list); write_unlock_irq(&zfcp_data.config_lock); if (port->rport) - fc_remote_port_delete(port->rport); - port->rport = NULL; + port->rport->dd_data = NULL; zfcp_adapter_put(port->adapter); sysfs_remove_group(&port->sysfs_device.kobj, &zfcp_sysfs_port_attrs); device_unregister(&port->sysfs_device); diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index cfb0dcb6e3ff..733fe3bf6285 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -108,7 +108,6 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device) /* initialize request counter */ BUG_ON(!zfcp_reqlist_isempty(adapter)); adapter->req_no = 0; - zfcp_fc_nameserver_init(adapter); zfcp_erp_modify_adapter_status(adapter, "ccsonl1", NULL, ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET); diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c index 10cbfd172a28..8305c874e86f 100644 --- a/drivers/s390/scsi/zfcp_cfdc.c +++ b/drivers/s390/scsi/zfcp_cfdc.c @@ -4,7 +4,7 @@ * Userspace interface for accessing the * Access Control Lists / Control File Data Channel * - * Copyright IBM Corporation 2008 + * Copyright IBM Corporation 2008, 2009 */ #define KMSG_COMPONENT "zfcp" @@ -197,6 +197,7 @@ static long zfcp_cfdc_dev_ioctl(struct file *file, unsigned int command, retval = -ENXIO; goto free_buffer; } + zfcp_adapter_get(adapter); retval = zfcp_cfdc_sg_setup(data->command, fsf_cfdc->sg, data_user->control_file); diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index a0318630f047..4c362a9069f0 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -255,7 +255,6 @@ enum zfcp_wka_status { /* logical unit status */ #define ZFCP_STATUS_UNIT_SHARED 0x00000004 #define ZFCP_STATUS_UNIT_READONLY 0x00000008 -#define ZFCP_STATUS_UNIT_SCSI_WORK_PENDING 0x00000020 /* FSF request status (this does not have a common part) */ #define ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT 0x00000002 @@ -530,6 +529,7 @@ struct zfcp_unit { struct zfcp_erp_action erp_action; /* pending error recovery */ atomic_t erp_counter; struct zfcp_latencies latencies; + struct work_struct scsi_work; }; /* FSF request */ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 631bdb1dfd6c..fdc9b4352a64 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -719,6 +719,7 @@ static void zfcp_erp_adapter_strategy_close(struct zfcp_erp_action *act) zfcp_qdio_close(adapter); zfcp_fsf_req_dismiss_all(adapter); adapter->fsf_req_seq_no = 0; + zfcp_fc_wka_port_force_offline(&adapter->nsp); /* all ports and units are closed */ zfcp_erp_modify_adapter_status(adapter, "erascl1", NULL, ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR); @@ -1176,48 +1177,6 @@ static void zfcp_erp_action_dequeue(struct zfcp_erp_action *erp_action) } } -struct zfcp_erp_add_work { - struct zfcp_unit *unit; - struct work_struct work; -}; - -static void zfcp_erp_scsi_scan(struct work_struct *work) -{ - struct zfcp_erp_add_work *p = - container_of(work, struct zfcp_erp_add_work, work); - struct zfcp_unit *unit = p->unit; - struct fc_rport *rport = unit->port->rport; - - if (rport && rport->port_state == FC_PORTSTATE_ONLINE) - scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, - scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0); - atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); - zfcp_unit_put(unit); - wake_up(&unit->port->adapter->erp_done_wqh); - kfree(p); -} - -static void zfcp_erp_schedule_work(struct zfcp_unit *unit) -{ - struct zfcp_erp_add_work *p; - - p = kzalloc(sizeof(*p), GFP_KERNEL); - if (!p) { - dev_err(&unit->port->adapter->ccw_device->dev, - "Registering unit 0x%016Lx on port 0x%016Lx failed\n", - (unsigned long long)unit->fcp_lun, - (unsigned long long)unit->port->wwpn); - return; - } - - zfcp_unit_get(unit); - atomic_set_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); - INIT_WORK(&p->work, zfcp_erp_scsi_scan); - p->unit = unit; - if (!queue_work(zfcp_data.work_queue, &p->work)) - zfcp_unit_put(unit); -} - static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) { struct zfcp_adapter *adapter = act->adapter; @@ -1226,11 +1185,11 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) switch (act->action) { case ZFCP_ERP_ACTION_REOPEN_UNIT: - flush_work(&port->rport_work); if ((result == ZFCP_ERP_SUCCEEDED) && !unit->device) { - if (!(atomic_read(&unit->status) & - ZFCP_STATUS_UNIT_SCSI_WORK_PENDING)) - zfcp_erp_schedule_work(unit); + zfcp_unit_get(unit); + if (scsi_queue_work(unit->port->adapter->scsi_host, + &unit->scsi_work) <= 0) + zfcp_unit_put(unit); } zfcp_unit_put(unit); break; @@ -1352,6 +1311,11 @@ static int zfcp_erp_thread(void *data) while (!(atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_ERP_THREAD_KILL)) { + + zfcp_rec_dbf_event_thread_lock("erthrd1", adapter); + ignore = down_interruptible(&adapter->erp_ready_sem); + zfcp_rec_dbf_event_thread_lock("erthrd2", adapter); + write_lock_irqsave(&adapter->erp_lock, flags); next = adapter->erp_ready_head.next; write_unlock_irqrestore(&adapter->erp_lock, flags); @@ -1363,10 +1327,6 @@ static int zfcp_erp_thread(void *data) if (zfcp_erp_strategy(act) != ZFCP_ERP_DISMISSED) zfcp_erp_wakeup(adapter); } - - zfcp_rec_dbf_event_thread_lock("erthrd1", adapter); - ignore = down_interruptible(&adapter->erp_ready_sem); - zfcp_rec_dbf_event_thread_lock("erthrd2", adapter); } atomic_clear_mask(ZFCP_STATUS_ADAPTER_ERP_THREAD_UP, &adapter->status); diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index f6399ca97bcb..2e31b536548c 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -106,6 +106,7 @@ extern void zfcp_fc_plogi_evaluate(struct zfcp_port *, struct fsf_plogi *); extern void zfcp_test_link(struct zfcp_port *); extern void zfcp_fc_link_test_work(struct work_struct *); extern void zfcp_fc_nameserver_init(struct zfcp_adapter *); +extern void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *); /* zfcp_fsf.c */ extern int zfcp_fsf_open_port(struct zfcp_erp_action *); @@ -158,6 +159,7 @@ extern void zfcp_scsi_rport_work(struct work_struct *); extern void zfcp_scsi_schedule_rport_register(struct zfcp_port *); extern void zfcp_scsi_schedule_rport_block(struct zfcp_port *); extern void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *); +extern void zfcp_scsi_scan(struct work_struct *); /* zfcp_sysfs.c */ extern struct attribute_group zfcp_sysfs_unit_attrs; diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index e8d032b9dfbd..19ae0842047c 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -98,13 +98,6 @@ static void zfcp_wka_port_offline(struct work_struct *work) struct zfcp_wka_port *wka_port = container_of(dw, struct zfcp_wka_port, work); - /* Don't wait forvever. If the wka_port is too busy take it offline - through a new call later */ - if (!wait_event_timeout(wka_port->completion_wq, - atomic_read(&wka_port->refcount) == 0, - HZ >> 1)) - return; - mutex_lock(&wka_port->mutex); if ((atomic_read(&wka_port->refcount) != 0) || (wka_port->status != ZFCP_WKA_PORT_ONLINE)) @@ -142,6 +135,14 @@ void zfcp_fc_nameserver_init(struct zfcp_adapter *adapter) INIT_DELAYED_WORK(&wka_port->work, zfcp_wka_port_offline); } +void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *wka) +{ + cancel_delayed_work_sync(&wka->work); + mutex_lock(&wka->mutex); + wka->status = ZFCP_WKA_PORT_OFFLINE; + mutex_unlock(&wka->mutex); +} + static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range, struct fcp_rscn_element *elem) { @@ -372,7 +373,8 @@ static void zfcp_fc_adisc_handler(unsigned long data) if (adisc->els.status) { /* request rejected or timed out */ - zfcp_erp_port_forced_reopen(port, 0, "fcadh_1", NULL); + zfcp_erp_port_forced_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, + "fcadh_1", NULL); goto out; } @@ -431,11 +433,6 @@ void zfcp_fc_link_test_work(struct work_struct *work) container_of(work, struct zfcp_port, test_link_work); int retval; - if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_UNBLOCKED)) { - zfcp_port_put(port); - return; /* port erp is running and will update rport status */ - } - zfcp_port_get(port); port->rport_task = RPORT_DEL; zfcp_scsi_rport_work(&port->rport_work); @@ -542,6 +539,9 @@ static void zfcp_validate_port(struct zfcp_port *port) { struct zfcp_adapter *adapter = port->adapter; + if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC)) + return; + atomic_clear_mask(ZFCP_STATUS_COMMON_NOESC, &port->status); if ((port->supported_classes != 0) || @@ -602,10 +602,8 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft, int max_entries) if (acc->wwpn == fc_host_port_name(adapter->scsi_host)) continue; port = zfcp_get_port_by_wwpn(adapter, acc->wwpn); - if (port) { - zfcp_port_get(port); + if (port) continue; - } port = zfcp_port_enqueue(adapter, acc->wwpn, ZFCP_STATUS_COMMON_NOESC, d_id); @@ -637,7 +635,8 @@ int zfcp_scan_ports(struct zfcp_adapter *adapter) max_entries = chain ? ZFCP_GPN_FT_MAX_ENTRIES : ZFCP_GPN_FT_ENTRIES; max_bytes = chain ? ZFCP_GPN_FT_MAX_SIZE : ZFCP_CT_SIZE_ONE_PAGE; - if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT) + if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT && + fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPIV) return 0; ret = zfcp_wka_port_get(&adapter->nsp); diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index b29f3121b666..74dee32afba8 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -172,12 +172,16 @@ static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req, char *id, struct fsf_link_down_info *link_down) { struct zfcp_adapter *adapter = req->adapter; + unsigned long flags; if (atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED) return; atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status); + + read_lock_irqsave(&zfcp_data.config_lock, flags); zfcp_scsi_schedule_rports_block(adapter); + read_unlock_irqrestore(&zfcp_data.config_lock, flags); if (!link_down) goto out; @@ -645,30 +649,30 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req) } } -static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter) - __releases(&adapter->req_q_lock) - __acquires(&adapter->req_q_lock) +static int zfcp_fsf_sbal_check(struct zfcp_adapter *adapter) { struct zfcp_qdio_queue *req_q = &adapter->req_q; - long ret; - if (atomic_read(&req_q->count) <= -REQUEST_LIST_SIZE) - return -EIO; - if (atomic_read(&req_q->count) > 0) - return 0; + spin_lock_bh(&adapter->req_q_lock); + if (atomic_read(&req_q->count)) + return 1; + spin_unlock_bh(&adapter->req_q_lock); + return 0; +} + +static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter) +{ + long ret; - atomic_dec(&req_q->count); spin_unlock_bh(&adapter->req_q_lock); ret = wait_event_interruptible_timeout(adapter->request_wq, - atomic_read(&req_q->count) >= 0, - 5 * HZ); - spin_lock_bh(&adapter->req_q_lock); - atomic_inc(&req_q->count); - + zfcp_fsf_sbal_check(adapter), 5 * HZ); if (ret > 0) return 0; if (!ret) atomic_inc(&adapter->qdio_outb_full); + + spin_lock_bh(&adapter->req_q_lock); return -EIO; } @@ -766,8 +770,9 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter, static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) { struct zfcp_adapter *adapter = req->adapter; - unsigned long flags; - int idx; + unsigned long flags; + int idx; + int with_qtcb = (req->qtcb != NULL); /* put allocated FSF request into hash table */ spin_lock_irqsave(&adapter->req_list_lock, flags); @@ -789,7 +794,7 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) } /* Don't increase for unsolicited status */ - if (req->qtcb) + if (with_qtcb) adapter->fsf_req_seq_no++; adapter->req_no++; @@ -1253,13 +1258,13 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter, spin_lock_bh(&adapter->req_q_lock); if (zfcp_fsf_req_sbal_get(adapter)) - goto out; + goto out_unlock; req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA, 0, NULL); if (IS_ERR(req)) { retval = PTR_ERR(req); - goto out; + goto out_unlock; } sbale = zfcp_qdio_sbale_req(req); @@ -1278,14 +1283,16 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter, zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); -out: spin_unlock_bh(&adapter->req_q_lock); if (!retval) wait_event(req->completion_wq, req->status & ZFCP_STATUS_FSFREQ_COMPLETED); zfcp_fsf_req_free(req); + return retval; +out_unlock: + spin_unlock_bh(&adapter->req_q_lock); return retval; } @@ -1352,13 +1359,13 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, spin_lock_bh(&adapter->req_q_lock); if (zfcp_fsf_req_sbal_get(adapter)) - goto out; + goto out_unlock; req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0, NULL); if (IS_ERR(req)) { retval = PTR_ERR(req); - goto out; + goto out_unlock; } if (data) @@ -1371,14 +1378,18 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, req->handler = zfcp_fsf_exchange_port_data_handler; zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); -out: spin_unlock_bh(&adapter->req_q_lock); + if (!retval) wait_event(req->completion_wq, req->status & ZFCP_STATUS_FSFREQ_COMPLETED); zfcp_fsf_req_free(req); return retval; + +out_unlock: + spin_unlock_bh(&adapter->req_q_lock); + return retval; } static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req) @@ -2472,8 +2483,6 @@ out: static void zfcp_fsf_control_file_handler(struct zfcp_fsf_req *req) { - if (req->qtcb->header.fsf_status != FSF_GOOD) - req->status |= ZFCP_STATUS_FSFREQ_ERROR; } /** diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 58201e1ae478..e8fbeaeb5fbf 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -171,7 +171,7 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt) write_unlock_irqrestore(&adapter->abort_lock, flags); zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL, old_req_id); - return SUCCESS; + return FAILED; /* completion could be in progress */ } old_req->data = NULL; @@ -486,10 +486,12 @@ static void zfcp_set_rport_dev_loss_tmo(struct fc_rport *rport, u32 timeout) */ static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport) { - struct zfcp_port *port = rport->dd_data; + struct zfcp_port *port; write_lock_irq(&zfcp_data.config_lock); - port->rport = NULL; + port = rport->dd_data; + if (port) + port->rport = NULL; write_unlock_irq(&zfcp_data.config_lock); } @@ -503,9 +505,18 @@ static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport) */ static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport) { - struct zfcp_port *port = rport->dd_data; + struct zfcp_port *port; + + write_lock_irq(&zfcp_data.config_lock); + port = rport->dd_data; + if (port) + zfcp_port_get(port); + write_unlock_irq(&zfcp_data.config_lock); - zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL); + if (port) { + zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL); + zfcp_port_put(port); + } } static void zfcp_scsi_rport_register(struct zfcp_port *port) @@ -534,8 +545,10 @@ static void zfcp_scsi_rport_register(struct zfcp_port *port) static void zfcp_scsi_rport_block(struct zfcp_port *port) { - if (port->rport) - fc_remote_port_delete(port->rport); + struct fc_rport *rport = port->rport; + + if (rport) + fc_remote_port_delete(rport); } void zfcp_scsi_schedule_rport_register(struct zfcp_port *port) @@ -583,6 +596,23 @@ void zfcp_scsi_rport_work(struct work_struct *work) } +void zfcp_scsi_scan(struct work_struct *work) +{ + struct zfcp_unit *unit = container_of(work, struct zfcp_unit, + scsi_work); + struct fc_rport *rport; + + flush_work(&unit->port->rport_work); + rport = unit->port->rport; + + if (rport && rport->port_state == FC_PORTSTATE_ONLINE) + scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, + scsilun_to_int((struct scsi_lun *) + &unit->fcp_lun), 0); + + zfcp_unit_put(unit); +} + struct fc_function_template zfcp_transport_functions = { .show_starget_port_id = 1, .show_starget_port_name = 1, diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c index 9a3b8e261c0a..3e51e64d1108 100644 --- a/drivers/s390/scsi/zfcp_sysfs.c +++ b/drivers/s390/scsi/zfcp_sysfs.c @@ -254,12 +254,21 @@ static ssize_t zfcp_sysfs_unit_remove_store(struct device *dev, write_lock_irq(&zfcp_data.config_lock); unit = zfcp_get_unit_by_lun(port, fcp_lun); - if (unit && (atomic_read(&unit->refcount) == 0)) { - zfcp_unit_get(unit); - atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &unit->status); - list_move(&unit->list, &unit_remove_lh); - } else - unit = NULL; + if (unit) { + write_unlock_irq(&zfcp_data.config_lock); + /* wait for possible timeout during SCSI probe */ + flush_work(&unit->scsi_work); + write_lock_irq(&zfcp_data.config_lock); + + if (atomic_read(&unit->refcount) == 0) { + zfcp_unit_get(unit); + atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, + &unit->status); + list_move(&unit->list, &unit_remove_lh); + } else { + unit = NULL; + } + } write_unlock_irq(&zfcp_data.config_lock); diff --git a/drivers/scsi/cxgb3i/cxgb3i.h b/drivers/scsi/cxgb3i/cxgb3i.h index d362860e7504..59b0958d2d11 100644 --- a/drivers/scsi/cxgb3i/cxgb3i.h +++ b/drivers/scsi/cxgb3i/cxgb3i.h @@ -34,7 +34,7 @@ #include "cxgb3i_offload.h" #include "cxgb3i_ddp.h" -#define CXGB3I_SCSI_QDEPTH_DFLT 128 +#define CXGB3I_SCSI_HOST_QDEPTH 1024 #define CXGB3I_MAX_TARGET CXGB3I_MAX_CONN #define CXGB3I_MAX_LUN 512 #define ISCSI_PDU_NONPAYLOAD_MAX \ diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.c b/drivers/scsi/cxgb3i/cxgb3i_ddp.c index d06a661c209f..99c912547902 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_ddp.c +++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.c @@ -120,20 +120,26 @@ static void clear_ddp_map(struct cxgb3i_ddp_info *ddp, unsigned int tag, } static inline int ddp_find_unused_entries(struct cxgb3i_ddp_info *ddp, - int start, int max, int count, + unsigned int start, unsigned int max, + unsigned int count, struct cxgb3i_gather_list *gl) { - unsigned int i, j; + unsigned int i, j, k; + /* not enough entries */ + if ((max - start) < count) + return -EBUSY; + + max -= count; spin_lock(&ddp->map_lock); - for (i = start; i <= max;) { - for (j = 0; j < count; j++) { - if (ddp->gl_map[i + j]) + for (i = start; i < max;) { + for (j = 0, k = i; j < count; j++, k++) { + if (ddp->gl_map[k]) break; } if (j == count) { - for (j = 0; j < count; j++) - ddp->gl_map[i + j] = gl; + for (j = 0, k = i; j < count; j++, k++) + ddp->gl_map[k] = gl; spin_unlock(&ddp->map_lock); return i; } @@ -354,7 +360,7 @@ int cxgb3i_ddp_tag_reserve(struct t3cdev *tdev, unsigned int tid, struct cxgb3i_ddp_info *ddp = tdev->ulp_iscsi; struct pagepod_hdr hdr; unsigned int npods; - int idx = -1, idx_max; + int idx = -1; int err = -ENOMEM; u32 sw_tag = *tagp; u32 tag; @@ -367,17 +373,17 @@ int cxgb3i_ddp_tag_reserve(struct t3cdev *tdev, unsigned int tid, } npods = (gl->nelem + PPOD_PAGES_MAX - 1) >> PPOD_PAGES_SHIFT; - idx_max = ddp->nppods - npods + 1; if (ddp->idx_last == ddp->nppods) - idx = ddp_find_unused_entries(ddp, 0, idx_max, npods, gl); + idx = ddp_find_unused_entries(ddp, 0, ddp->nppods, npods, gl); else { idx = ddp_find_unused_entries(ddp, ddp->idx_last + 1, - idx_max, npods, gl); - if (idx < 0 && ddp->idx_last >= npods) + ddp->nppods, npods, gl); + if (idx < 0 && ddp->idx_last >= npods) { idx = ddp_find_unused_entries(ddp, 0, - ddp->idx_last - npods + 1, + min(ddp->idx_last + npods, ddp->nppods), npods, gl); + } } if (idx < 0) { ddp_log_debug("xferlen %u, gl %u, npods %u NO DDP.\n", diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c index fff8e4327644..9212400b9b13 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c +++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c @@ -876,13 +876,14 @@ static struct scsi_host_template cxgb3i_host_template = { .proc_name = "cxgb3i", .queuecommand = iscsi_queuecommand, .change_queue_depth = iscsi_change_queue_depth, - .can_queue = CXGB3I_SCSI_QDEPTH_DFLT - 1, + .can_queue = CXGB3I_SCSI_HOST_QDEPTH, .sg_tablesize = SG_ALL, .max_sectors = 0xFFFF, - .cmd_per_lun = CXGB3I_SCSI_QDEPTH_DFLT, + .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN, .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler = iscsi_eh_device_reset, .eh_target_reset_handler = iscsi_eh_target_reset, + .target_alloc = iscsi_target_alloc, .use_clustering = DISABLE_CLUSTERING, .this_id = -1, }; diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c index 4d8654cdbdae..e11c9c180f39 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_offload.c +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -1737,7 +1737,7 @@ int cxgb3i_c3cn_send_pdus(struct s3_conn *c3cn, struct sk_buff *skb) c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n", c3cn, c3cn->write_seq, c3cn->snd_una, cxgb3_snd_win); - err = -EAGAIN; + err = -ENOBUFS; goto out_err; } @@ -1775,6 +1775,8 @@ done: out_err: if (copied == 0 && err == -EPIPE) copied = c3cn->err ? c3cn->err : -EPIPE; + else + copied = err; goto done; } diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c index 7eebc9a7cb35..709105071177 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c +++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c @@ -400,17 +400,18 @@ int cxgb3i_conn_xmit_pdu(struct iscsi_task *task) return 0; } - if (err < 0 && err != -EAGAIN) { - kfree_skb(skb); - cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n", - task->itt, skb, skb->len, skb->data_len, err); - iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err); - iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED); + if (err == -EAGAIN || err == -ENOBUFS) { + /* reset skb to send when we are called again */ + tdata->skb = skb; return err; } - /* reset skb to send when we are called again */ - tdata->skb = skb; - return -EAGAIN; + + kfree_skb(skb); + cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n", + task->itt, skb, skb->len, skb->data_len, err); + iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err); + iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED); + return err; } int cxgb3i_pdu_init(void) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 94e1e3189773..03e1926f40b5 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -57,7 +57,7 @@ DEFINE_RWLOCK(fcoe_hostlist_lock); DEFINE_TIMER(fcoe_timer, NULL, 0, 0); DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu); -/* Function Prototyes */ +/* Function Prototypes */ static int fcoe_reset(struct Scsi_Host *shost); static int fcoe_xmit(struct fc_lport *, struct fc_frame *); static int fcoe_rcv(struct sk_buff *, struct net_device *, @@ -138,7 +138,6 @@ static struct scsi_host_template fcoe_shost_template = { /** * fcoe_lport_config() - sets up the fc_lport * @lp: ptr to the fc_lport - * @shost: ptr to the parent scsi host * * Returns: 0 for success */ @@ -256,6 +255,7 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev) rtnl_lock(); memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN); dev_unicast_add(fc->real_dev, flogi_maddr, ETH_ALEN); + dev_mc_add(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0); rtnl_unlock(); /* @@ -380,7 +380,7 @@ static int fcoe_if_destroy(struct net_device *netdev) dev_mc_delete(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0); rtnl_unlock(); - /* Free the per-CPU revieve threads */ + /* Free the per-CPU receive threads */ fcoe_percpu_clean(lp); /* Free existing skbs */ @@ -720,7 +720,7 @@ static void fcoe_percpu_thread_destroy(unsigned int cpu) } #else /* - * This a non-SMP scenario where the singluar Rx thread is + * This a non-SMP scenario where the singular Rx thread is * being removed. Free all skbs and stop the thread. */ spin_lock_bh(&p->fcoe_rx_list.lock); @@ -777,7 +777,7 @@ static struct notifier_block fcoe_cpu_notifier = { * @skb: the receive skb * @dev: associated net device * @ptype: context - * @odldev: last device + * @olddev: last device * * this function will receive the packet and build fc frame and pass it up * @@ -884,7 +884,6 @@ err2: kfree_skb(skb); return -1; } -EXPORT_SYMBOL_GPL(fcoe_rcv); /** * fcoe_start_io() - pass to netdev to start xmit for fcoe @@ -905,7 +904,7 @@ static inline int fcoe_start_io(struct sk_buff *skb) } /** - * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof + * fcoe_get_paged_crc_eof() - in case we need to alloc a page for crc_eof * @skb: the skb to be xmitted * @tlen: total len * @@ -947,7 +946,7 @@ static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen) /** * fcoe_fc_crc() - calculates FC CRC in this fcoe skb - * @fp: the fc_frame containg data to be checksummed + * @fp: the fc_frame containing data to be checksummed * * This uses crc32() to calculate the crc for fc frame * Return : 32 bit crc @@ -1011,7 +1010,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) wlen = skb->len / FCOE_WORD_TO_BYTE; if (!lp->link_up) { - kfree(skb); + kfree_skb(skb); return 0; } @@ -1062,7 +1061,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) cp = NULL; } - /* adjust skb netowrk/transport offsets to match mac/fcoe/fc */ + /* adjust skb network/transport offsets to match mac/fcoe/fc */ skb_push(skb, elen + hlen); skb_reset_mac_header(skb); skb_reset_network_header(skb); @@ -1123,7 +1122,6 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp) return 0; } -EXPORT_SYMBOL_GPL(fcoe_xmit); /** * fcoe_percpu_receive_thread() - recv thread per cpu @@ -1296,17 +1294,16 @@ void fcoe_watchdog(ulong vp) /** - * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue - * @lp: the fc_port for this skb - * @skb: the associated skb to be xmitted + * fcoe_check_wait_queue() - attempt to clear the transmit backlog + * @lp: the fc_lport * * This empties the wait_queue, dequeue the head of the wait_queue queue * and calls fcoe_start_io() for each packet, if all skb have been * transmitted, return qlen or -1 if a error occurs, then restore - * wait_queue and try again later. + * wait_queue and try again later. * * The wait_queue is used when the skb transmit fails. skb will go - * in the wait_queue which will be emptied by the time function OR + * in the wait_queue which will be emptied by the timer function or * by the next skb transmit. * * Returns: 0 for success @@ -1355,10 +1352,6 @@ out: */ static void fcoe_dev_setup() { - /* - * here setup a interface specific wd time to - * monitor the link state - */ register_netdevice_notifier(&fcoe_notifier); } @@ -1437,10 +1430,9 @@ out: /** * fcoe_if_to_netdev() - parse a name buffer to get netdev - * @ifname: fixed array for output parsed ifname * @buffer: incoming buffer to be copied * - * Returns: NULL or ptr to netdeive + * Returns: NULL or ptr to net_device */ static struct net_device *fcoe_if_to_netdev(const char *buffer) { @@ -1458,7 +1450,7 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer) } /** - * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev + * fcoe_netdev_to_module_owner() - finds out the driver module of the netdev * @netdev: the target netdev * * Returns: ptr to the struct module, NULL for failure @@ -1488,7 +1480,7 @@ fcoe_netdev_to_module_owner(const struct net_device *netdev) * Holds the Ethernet driver module by try_module_get() for * the corresponding netdev. * - * Returns: 0 for succsss + * Returns: 0 for success */ static int fcoe_ethdrv_get(const struct net_device *netdev) { @@ -1510,7 +1502,7 @@ static int fcoe_ethdrv_get(const struct net_device *netdev) * Releases the Ethernet driver module by module_put for * the corresponding netdev. * - * Returns: 0 for succsss + * Returns: 0 for success */ static int fcoe_ethdrv_put(const struct net_device *netdev) { @@ -1528,7 +1520,7 @@ static int fcoe_ethdrv_put(const struct net_device *netdev) /** * fcoe_destroy() - handles the destroy from sysfs - * @buffer: expcted to be a eth if name + * @buffer: expected to be an eth if name * @kp: associated kernel param * * Returns: 0 for success @@ -1565,7 +1557,7 @@ out_nodev: /** * fcoe_create() - Handles the create call from sysfs - * @buffer: expcted to be a eth if name + * @buffer: expected to be an eth if name * @kp: associated kernel param * * Returns: 0 for success @@ -1652,7 +1644,6 @@ int fcoe_link_ok(struct fc_lport *lp) return rc; } -EXPORT_SYMBOL_GPL(fcoe_link_ok); /** * fcoe_percpu_clean() - Clear the pending skbs for an lport @@ -1684,7 +1675,6 @@ void fcoe_percpu_clean(struct fc_lport *lp) spin_unlock_bh(&pp->fcoe_rx_list.lock); } } -EXPORT_SYMBOL_GPL(fcoe_percpu_clean); /** * fcoe_clean_pending_queue() - Dequeue a skb and free it @@ -1705,7 +1695,6 @@ void fcoe_clean_pending_queue(struct fc_lport *lp) } spin_unlock_bh(&fc->fcoe_pending_queue.lock); } -EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue); /** * fcoe_reset() - Resets the fcoe @@ -1719,11 +1708,10 @@ int fcoe_reset(struct Scsi_Host *shost) fc_lport_reset(lport); return 0; } -EXPORT_SYMBOL_GPL(fcoe_reset); /** * fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device - * @device: this is currently ptr to net_device + * @dev: this is currently ptr to net_device * * Returns: NULL or the located fcoe_softc */ @@ -1757,11 +1745,10 @@ struct fc_lport *fcoe_hostlist_lookup(const struct net_device *netdev) return (fc) ? fc->ctlr.lp : NULL; } -EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup); /** * fcoe_hostlist_add() - Add a lport to lports list - * @lp: ptr to the fc_lport to badded + * @lp: ptr to the fc_lport to be added * * Returns: 0 for success */ @@ -1778,11 +1765,10 @@ int fcoe_hostlist_add(const struct fc_lport *lp) } return 0; } -EXPORT_SYMBOL_GPL(fcoe_hostlist_add); /** * fcoe_hostlist_remove() - remove a lport from lports list - * @lp: ptr to the fc_lport to badded + * @lp: ptr to the fc_lport to be removed * * Returns: 0 for success */ @@ -1798,7 +1784,6 @@ int fcoe_hostlist_remove(const struct fc_lport *lp) return 0; } -EXPORT_SYMBOL_GPL(fcoe_hostlist_remove); /** * fcoe_init() - fcoe module loading initialization diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index f410f4abb548..62ba0f39c6bd 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -122,7 +122,7 @@ static void fcoe_ctlr_reset_fcfs(struct fcoe_ctlr *fip) } /** - * fcoe_ctrl_destroy() - Disable and tear-down the FCoE controller. + * fcoe_ctlr_destroy() - Disable and tear-down the FCoE controller. * @fip: FCoE controller. * * This is called by FCoE drivers before freeing the &fcoe_ctlr. diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index c09d77591f92..dd689ded8609 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -3654,6 +3654,7 @@ static int ipr_slave_configure(struct scsi_device *sdev) { struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata; struct ipr_resource_entry *res; + struct ata_port *ap = NULL; unsigned long lock_flags = 0; spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); @@ -3672,12 +3673,16 @@ static int ipr_slave_configure(struct scsi_device *sdev) } if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res)) sdev->allow_restart = 1; - if (ipr_is_gata(res) && res->sata_port) { + if (ipr_is_gata(res) && res->sata_port) + ap = res->sata_port->ap; + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); + + if (ap) { scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN); - ata_sas_slave_configure(sdev, res->sata_port->ap); - } else { + ata_sas_slave_configure(sdev, ap); + } else scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun); - } + return 0; } spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); return 0; diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index b3e5e08e44ab..b7c092d63bbe 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -463,7 +463,7 @@ static int iscsi_sw_tcp_pdu_init(struct iscsi_task *task, } if (err) { - iscsi_conn_failure(conn, err); + /* got invalid offset/len */ return -EIO; } return 0; @@ -851,6 +851,7 @@ static struct scsi_host_template iscsi_sw_tcp_sht = { .use_clustering = DISABLE_CLUSTERING, .slave_alloc = iscsi_sw_tcp_slave_alloc, .slave_configure = iscsi_sw_tcp_slave_configure, + .target_alloc = iscsi_target_alloc, .proc_name = "iscsi_tcp", .this_id = -1, }; diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index e57556ea5b48..4c880656990b 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -113,6 +113,11 @@ void fc_disc_stop_rports(struct fc_disc *disc) lport->tt.rport_logoff(rport); } + list_for_each_entry_safe(rdata, next, &disc->rogue_rports, peers) { + rport = PRIV_TO_RPORT(rdata); + lport->tt.rport_logoff(rport); + } + mutex_unlock(&disc->disc_mutex); } @@ -131,23 +136,32 @@ static void fc_disc_rport_callback(struct fc_lport *lport, { struct fc_rport_libfc_priv *rdata = rport->dd_data; struct fc_disc *disc = &lport->disc; - int found = 0; FC_DEBUG_DISC("Received a %d event for port (%6x)\n", event, rport->port_id); - if (event == RPORT_EV_CREATED) { + switch (event) { + case RPORT_EV_CREATED: if (disc) { - found = 1; mutex_lock(&disc->disc_mutex); list_add_tail(&rdata->peers, &disc->rports); mutex_unlock(&disc->disc_mutex); } + break; + case RPORT_EV_LOGO: + case RPORT_EV_FAILED: + case RPORT_EV_STOP: + mutex_lock(&disc->disc_mutex); + mutex_lock(&rdata->rp_mutex); + if (rdata->trans_state == FC_PORTSTATE_ROGUE) + list_del(&rdata->peers); + mutex_unlock(&rdata->rp_mutex); + mutex_unlock(&disc->disc_mutex); + break; + default: + break; } - if (!found) - FC_DEBUG_DISC("The rport (%6x) is not maintained " - "by the discovery layer\n", rport->port_id); } /** @@ -439,6 +453,7 @@ static int fc_disc_new_target(struct fc_disc *disc, rdata = rport->dd_data; rdata->ops = &fc_disc_rport_ops; rdata->rp_state = RPORT_ST_INIT; + list_add_tail(&rdata->peers, &disc->rogue_rports); lport->tt.rport_login(rport); } } @@ -461,21 +476,29 @@ static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport) /** * fc_disc_done() - Discovery has been completed * @disc: FC discovery context + * Locking Note: This function expects that the disc mutex is locked before + * it is called. The discovery callback is then made with the lock released, + * and the lock is re-taken before returning from this function */ static void fc_disc_done(struct fc_disc *disc) { struct fc_lport *lport = disc->lport; + enum fc_disc_event event; FC_DEBUG_DISC("Discovery complete for port (%6x)\n", fc_host_port_id(lport->host)); - disc->disc_callback(lport, disc->event); + event = disc->event; disc->event = DISC_EV_NONE; if (disc->requested) fc_disc_gpn_ft_req(disc); else disc->pending = 0; + + mutex_unlock(&disc->disc_mutex); + disc->disc_callback(lport, event); + mutex_lock(&disc->disc_mutex); } /** @@ -622,6 +645,8 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len) rdata = rport->dd_data; rdata->ops = &fc_disc_rport_ops; rdata->local_port = lport; + list_add_tail(&rdata->peers, + &disc->rogue_rports); lport->tt.rport_login(rport); } else FC_DBG("Failed to allocate memory for " @@ -681,8 +706,8 @@ static void fc_disc_timeout(struct work_struct *work) * @fp: response frame * @lp_arg: Fibre Channel host port instance * - * Locking Note: This function expects that the disc_mutex is locked - * before it is called. + * Locking Note: This function is called without disc mutex held, and + * should do all its processing with the mutex held */ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, void *disc_arg) @@ -695,11 +720,13 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, unsigned int len; int error; + mutex_lock(&disc->disc_mutex); FC_DEBUG_DISC("Received a GPN_FT response on port (%6x)\n", fc_host_port_id(disc->lport->host)); if (IS_ERR(fp)) { fc_disc_error(disc, fp); + mutex_unlock(&disc->disc_mutex); return; } @@ -744,6 +771,8 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, disc->seq_count++; } fc_frame_free(fp); + + mutex_unlock(&disc->disc_mutex); } /** @@ -757,7 +786,6 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp, static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp) { struct fc_lport *lport; - struct fc_rport *rport; struct fc_rport *new_rport; struct fc_rport_libfc_priv *rdata; @@ -766,15 +794,12 @@ static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp) if (dp->ids.port_id == fc_host_port_id(lport->host)) goto out; - rport = lport->tt.rport_lookup(lport, dp->ids.port_id); - if (rport) - fc_disc_del_target(disc, rport); - new_rport = lport->tt.rport_create(dp); if (new_rport) { rdata = new_rport->dd_data; rdata->ops = &fc_disc_rport_ops; kfree(dp); + list_add_tail(&rdata->peers, &disc->rogue_rports); lport->tt.rport_login(new_rport); } return; @@ -836,6 +861,7 @@ int fc_disc_init(struct fc_lport *lport) INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout); mutex_init(&disc->disc_mutex); INIT_LIST_HEAD(&disc->rports); + INIT_LIST_HEAD(&disc->rogue_rports); disc->lport = lport; disc->delay = FC_DISC_DELAY; diff --git a/drivers/scsi/libfc/fc_elsct.c b/drivers/scsi/libfc/fc_elsct.c index dd47fe619d1e..5878b34bff18 100644 --- a/drivers/scsi/libfc/fc_elsct.c +++ b/drivers/scsi/libfc/fc_elsct.c @@ -41,7 +41,7 @@ static struct fc_seq *fc_elsct_send(struct fc_lport *lport, void *arg, u32 timer_msec) { enum fc_rctl r_ctl; - u32 did; + u32 did = FC_FID_NONE; enum fc_fh_type fh_type; int rc; diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index f555ae99ad40..521f996f9b13 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -713,7 +713,7 @@ done: static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg) { struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg; - struct fc_lport *lp; + struct fc_lport *lport = fsp->lp; struct fc_frame_header *fh; struct fcp_txrdy *dd; u8 r_ctl; @@ -724,9 +724,8 @@ static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg) fh = fc_frame_header_get(fp); r_ctl = fh->fh_r_ctl; - lp = fsp->lp; - if (!(lp->state & LPORT_ST_READY)) + if (!(lport->state & LPORT_ST_READY)) goto out; if (fc_fcp_lock_pkt(fsp)) goto out; @@ -779,7 +778,7 @@ errout: if (IS_ERR(fp)) fc_fcp_error(fsp, fp); else if (rc == -ENOMEM) - fc_fcp_reduce_can_queue(lp); + fc_fcp_reduce_can_queue(lport); } static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index b8178ef398d7..e0c247724d2b 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -618,6 +618,11 @@ int fc_fabric_logoff(struct fc_lport *lport) { lport->tt.disc_stop_final(lport); mutex_lock(&lport->lp_mutex); + if (lport->dns_rp) + lport->tt.rport_logoff(lport->dns_rp); + mutex_unlock(&lport->lp_mutex); + lport->tt.rport_flush_queue(); + mutex_lock(&lport->lp_mutex); fc_lport_enter_logo(lport); mutex_unlock(&lport->lp_mutex); cancel_delayed_work_sync(&lport->retry_work); @@ -639,7 +644,12 @@ EXPORT_SYMBOL(fc_fabric_logoff); */ int fc_lport_destroy(struct fc_lport *lport) { + mutex_lock(&lport->lp_mutex); + lport->state = LPORT_ST_NONE; + lport->link_up = 0; lport->tt.frame_send = fc_frame_drop; + mutex_unlock(&lport->lp_mutex); + lport->tt.fcp_abort_io(lport); lport->tt.exch_mgr_reset(lport, 0, 0); return 0; @@ -1032,17 +1042,19 @@ static void fc_lport_rft_id_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a RFT_ID response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_RFT_ID) { FC_DBG("Received a RFT_ID response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); @@ -1084,17 +1096,19 @@ static void fc_lport_rpn_id_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a RPN_ID response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_RPN_ID) { FC_DBG("Received a RPN_ID response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + fh = fc_frame_header_get(fp); ct = fc_frame_payload_get(fp, sizeof(*ct)); if (fh && ct && fh->fh_type == FC_TYPE_CT && @@ -1134,17 +1148,19 @@ static void fc_lport_scr_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a SCR response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_SCR) { FC_DBG("Received a SCR response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_ready(lport); @@ -1360,17 +1376,19 @@ static void fc_lport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a LOGO response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_LOGO) { FC_DBG("Received a LOGO response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) fc_lport_enter_reset(lport); @@ -1400,10 +1418,6 @@ static void fc_lport_enter_logo(struct fc_lport *lport) fc_lport_state_enter(lport, LPORT_ST_LOGO); - /* DNS session should be closed so we can release it here */ - if (lport->dns_rp) - lport->tt.rport_logoff(lport->dns_rp); - fp = fc_frame_alloc(lport, sizeof(*logo)); if (!fp) { fc_lport_error(lport, fp); @@ -1444,17 +1458,19 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_LPORT("Received a FLOGI response\n"); - if (IS_ERR(fp)) { - fc_lport_error(lport, fp); - goto err; - } - if (lport->state != LPORT_ST_FLOGI) { FC_DBG("Received a FLOGI response, but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + fh = fc_frame_header_get(fp); did = ntoh24(fh->fh_d_id); if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) { diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 0472bb73221e..747d73c5c8af 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -267,6 +267,10 @@ static void fc_rport_work(struct work_struct *work) "(%6x).\n", ids.port_id); event = RPORT_EV_FAILED; } + if (rport->port_id != FC_FID_DIR_SERV) + if (rport_ops->event_callback) + rport_ops->event_callback(lport, rport, + RPORT_EV_FAILED); put_device(&rport->dev); rport = new_rport; rdata = new_rport->dd_data; @@ -325,11 +329,20 @@ int fc_rport_login(struct fc_rport *rport) int fc_rport_logoff(struct fc_rport *rport) { struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; mutex_lock(&rdata->rp_mutex); FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id); + if (rdata->rp_state == RPORT_ST_NONE) { + FC_DEBUG_RPORT("(%6x): Port (%6x) in NONE state," + " not removing", fc_host_port_id(lport->host), + rport->port_id); + mutex_unlock(&rdata->rp_mutex); + goto out; + } + fc_rport_enter_logo(rport); /* @@ -349,6 +362,7 @@ int fc_rport_logoff(struct fc_rport *rport) mutex_unlock(&rdata->rp_mutex); +out: return 0; } @@ -430,6 +444,7 @@ static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp) case RPORT_ST_PRLI: case RPORT_ST_LOGO: rdata->event = RPORT_EV_FAILED; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); break; @@ -494,7 +509,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, struct fc_rport *rport = rp_arg; struct fc_rport_libfc_priv *rdata = rport->dd_data; struct fc_lport *lport = rdata->local_port; - struct fc_els_flogi *plp; + struct fc_els_flogi *plp = NULL; unsigned int tov; u16 csp_seq; u16 cssp_seq; @@ -505,17 +520,19 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_PLOGI) { FC_DBG("Received a PLOGI response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC && (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) { @@ -614,17 +631,19 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_PRLI) { FC_DBG("Received a PRLI response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { pp = fc_frame_payload_get(fp, sizeof(*pp)); @@ -646,6 +665,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, } else { FC_DBG("Bad ELS response\n"); rdata->event = RPORT_EV_FAILED; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); } @@ -678,23 +698,26 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error_retry(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_LOGO) { FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error_retry(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { fc_rport_enter_rtv(rport); } else { FC_DBG("Bad ELS response\n"); rdata->event = RPORT_EV_LOGO; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); } @@ -764,17 +787,19 @@ static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp, FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n", rport->port_id); - if (IS_ERR(fp)) { - fc_rport_error(rport, fp); - goto err; - } - if (rdata->rp_state != RPORT_ST_RTV) { FC_DBG("Received a RTV response, but in state %s\n", fc_rport_state(rport)); + if (IS_ERR(fp)) + goto err; goto out; } + if (IS_ERR(fp)) { + fc_rport_error(rport, fp); + goto err; + } + op = fc_frame_payload_op(fp); if (op == ELS_LS_ACC) { struct fc_els_rtv_acc *rtv; @@ -1007,6 +1032,8 @@ static void fc_rport_recv_plogi_req(struct fc_rport *rport, default: FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected " "state %d\n", sid, rdata->rp_state); + fc_frame_free(fp); + return; break; } @@ -1098,6 +1125,8 @@ static void fc_rport_recv_prli_req(struct fc_rport *rport, reason = ELS_RJT_NONE; break; default: + fc_frame_free(rx_fp); + return; break; } len = fr_len(rx_fp) - sizeof(*fh); @@ -1227,6 +1256,11 @@ static void fc_rport_recv_prlo_req(struct fc_rport *rport, struct fc_seq *sp, "while in state %s\n", ntoh24(fh->fh_s_id), fc_rport_state(rport)); + if (rdata->rp_state == RPORT_ST_NONE) { + fc_frame_free(fp); + return; + } + rjt_data.fp = NULL; rjt_data.reason = ELS_RJT_UNAB; rjt_data.explan = ELS_EXPL_NONE; @@ -1256,7 +1290,13 @@ static void fc_rport_recv_logo_req(struct fc_rport *rport, struct fc_seq *sp, "while in state %s\n", ntoh24(fh->fh_s_id), fc_rport_state(rport)); + if (rdata->rp_state == RPORT_ST_NONE) { + fc_frame_free(fp); + return; + } + rdata->event = RPORT_EV_LOGO; + fc_rport_state_enter(rport, RPORT_ST_NONE); queue_work(rport_event_queue, &rdata->event_work); lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL); diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 689628359169..e72b4ad47d35 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1463,6 +1463,16 @@ int iscsi_change_queue_depth(struct scsi_device *sdev, int depth) } EXPORT_SYMBOL_GPL(iscsi_change_queue_depth); +int iscsi_target_alloc(struct scsi_target *starget) +{ + struct iscsi_cls_session *cls_session = starget_to_session(starget); + struct iscsi_session *session = cls_session->dd_data; + + starget->can_queue = session->scsi_cmds_max; + return 0; +} +EXPORT_SYMBOL_GPL(iscsi_target_alloc); + void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session) { struct iscsi_session *session = cls_session->dd_data; diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index 91f8ce4d8d08..b579ca9f4836 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -1036,8 +1036,11 @@ flush: rc = conn->session->tt->init_pdu(task, r2t->data_offset + r2t->sent, r2t->data_count); - if (rc) + if (rc) { + iscsi_conn_failure(conn, ISCSI_ERR_XMIT_FAILED); return rc; + } + r2t->sent += r2t->data_count; goto flush; } diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index dcba267db711..1105f9a111ba 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -443,6 +443,7 @@ struct lpfc_hba { uint32_t hba_flag; /* hba generic flags */ #define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */ +#define DEFER_ERATT 0x4 /* Deferred error attention in progress */ struct lpfc_dmabuf slim2p; MAILBOX_t *mbox; @@ -723,4 +724,3 @@ lpfc_sli_read_hs(struct lpfc_hba *phba) return; } - diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 40cf0f4f327f..c14f0cbdb125 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -51,7 +51,7 @@ #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8" /** - * lpfc_jedec_to_ascii: Hex to ascii convertor according to JEDEC rules. + * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules * @incr: integer to convert. * @hdw: ascii string holding converted integer plus a string terminator. * @@ -82,7 +82,7 @@ lpfc_jedec_to_ascii(int incr, char hdw[]) } /** - * lpfc_drvr_version_show: Return the Emulex driver string with version number. + * lpfc_drvr_version_show - Return the Emulex driver string with version number * @dev: class unused variable. * @attr: device attribute, not used. * @buf: on return contains the module description text. @@ -152,7 +152,7 @@ lpfc_bg_reftag_err_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_info_show: Return some pci info about the host in ascii. + * lpfc_info_show - Return some pci info about the host in ascii * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted text from lpfc_info(). @@ -169,7 +169,7 @@ lpfc_info_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_serialnum_show: Return the hba serial number in ascii. + * lpfc_serialnum_show - Return the hba serial number in ascii * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted text serial number. @@ -188,7 +188,7 @@ lpfc_serialnum_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_temp_sensor_show: Return the temperature sensor level. + * lpfc_temp_sensor_show - Return the temperature sensor level * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the formatted support level. @@ -210,7 +210,7 @@ lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_modeldesc_show: Return the model description of the hba. + * lpfc_modeldesc_show - Return the model description of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd model description. @@ -229,7 +229,7 @@ lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_modelname_show: Return the model name of the hba. + * lpfc_modelname_show - Return the model name of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd model name. @@ -248,7 +248,7 @@ lpfc_modelname_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_programtype_show: Return the program type of the hba. + * lpfc_programtype_show - Return the program type of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. @@ -267,7 +267,7 @@ lpfc_programtype_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_mlomgmt_show: Return the Menlo Maintenance sli flag. + * lpfc_mlomgmt_show - Return the Menlo Maintenance sli flag * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the Menlo Maintenance sli flag. @@ -286,7 +286,7 @@ lpfc_mlomgmt_show(struct device *dev, struct device_attribute *attr, char *buf) } /** - * lpfc_vportnum_show: Return the port number in ascii of the hba. + * lpfc_vportnum_show - Return the port number in ascii of the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains scsi vpd program type. @@ -305,7 +305,7 @@ lpfc_vportnum_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_fwrev_show: Return the firmware rev running in the hba. + * lpfc_fwrev_show - Return the firmware rev running in the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. @@ -326,7 +326,7 @@ lpfc_fwrev_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_hdw_show: Return the jedec information about the hba. + * lpfc_hdw_show - Return the jedec information about the hba * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the scsi vpd program type. @@ -347,7 +347,7 @@ lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf) } /** - * lpfc_option_rom_version_show: Return the adapter ROM FCode version. + * lpfc_option_rom_version_show - Return the adapter ROM FCode version * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the ROM and FCode ascii strings. @@ -366,7 +366,7 @@ lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_state_show: Return the link state of the port. + * lpfc_state_show - Return the link state of the port * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains text describing the state of the link. @@ -451,7 +451,7 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_num_discovered_ports_show: Return sum of mapped and unmapped vports. + * lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the sum of fc mapped and unmapped. @@ -474,7 +474,7 @@ lpfc_num_discovered_ports_show(struct device *dev, } /** - * lpfc_issue_lip: Misnomer, name carried over from long ago. + * lpfc_issue_lip - Misnomer, name carried over from long ago * @shost: Scsi_Host pointer. * * Description: @@ -529,7 +529,7 @@ lpfc_issue_lip(struct Scsi_Host *shost) } /** - * lpfc_do_offline: Issues a mailbox command to bring the link down. + * lpfc_do_offline - Issues a mailbox command to bring the link down * @phba: lpfc_hba pointer. * @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL. * @@ -537,7 +537,7 @@ lpfc_issue_lip(struct Scsi_Host *shost) * Assumes any error from lpfc_do_offline() will be negative. * Can wait up to 5 seconds for the port ring buffers count * to reach zero, prints a warning if it is not zero and continues. - * lpfc_workq_post_event() returns a non-zero return coce if call fails. + * lpfc_workq_post_event() returns a non-zero return code if call fails. * * Returns: * -EIO error posting the event @@ -591,7 +591,7 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) } /** - * lpfc_selective_reset: Offline then onlines the port. + * lpfc_selective_reset - Offline then onlines the port * @phba: lpfc_hba pointer. * * Description: @@ -632,7 +632,7 @@ lpfc_selective_reset(struct lpfc_hba *phba) } /** - * lpfc_issue_reset: Selectively resets an adapter. + * lpfc_issue_reset - Selectively resets an adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the string "selective". @@ -672,7 +672,7 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, } /** - * lpfc_nport_evt_cnt_show: Return the number of nport events. + * lpfc_nport_evt_cnt_show - Return the number of nport events * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the ascii number of nport events. @@ -691,7 +691,7 @@ lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_board_mode_show: Return the state of the board. + * lpfc_board_mode_show - Return the state of the board * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the state of the adapter. @@ -720,7 +720,7 @@ lpfc_board_mode_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_board_mode_store: Puts the hba in online, offline, warm or error state. + * lpfc_board_mode_store - Puts the hba in online, offline, warm or error state * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing one of the strings "online", "offline", "warm" or "error". @@ -766,14 +766,14 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, } /** - * lpfc_get_hba_info: Return various bits of informaton about the adapter. + * lpfc_get_hba_info - Return various bits of informaton about the adapter * @phba: pointer to the adapter structure. - * @mxri max xri count. - * @axri available xri count. - * @mrpi max rpi count. - * @arpi available rpi count. - * @mvpi max vpi count. - * @avpi available vpi count. + * @mxri: max xri count. + * @axri: available xri count. + * @mrpi: max rpi count. + * @arpi: available rpi count. + * @mvpi: max vpi count. + * @avpi: available vpi count. * * Description: * If an integer pointer for an count is not null then the value for the @@ -846,7 +846,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba, } /** - * lpfc_max_rpi_show: Return maximum rpi. + * lpfc_max_rpi_show - Return maximum rpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum rpi count in decimal or "Unknown". @@ -874,7 +874,7 @@ lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_used_rpi_show: Return maximum rpi minus available rpi. + * lpfc_used_rpi_show - Return maximum rpi minus available rpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the used rpi count in decimal or "Unknown". @@ -902,7 +902,7 @@ lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_max_xri_show: Return maximum xri. + * lpfc_max_xri_show - Return maximum xri * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum xri count in decimal or "Unknown". @@ -930,7 +930,7 @@ lpfc_max_xri_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_used_xri_show: Return maximum xpi minus the available xpi. + * lpfc_used_xri_show - Return maximum xpi minus the available xpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the used xri count in decimal or "Unknown". @@ -958,7 +958,7 @@ lpfc_used_xri_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_max_vpi_show: Return maximum vpi. + * lpfc_max_vpi_show - Return maximum vpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the maximum vpi count in decimal or "Unknown". @@ -986,7 +986,7 @@ lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_used_vpi_show: Return maximum vpi minus the available vpi. + * lpfc_used_vpi_show - Return maximum vpi minus the available vpi * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the used vpi count in decimal or "Unknown". @@ -1014,7 +1014,7 @@ lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_npiv_info_show: Return text about NPIV support for the adapter. + * lpfc_npiv_info_show - Return text about NPIV support for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: text that must be interpreted to determine if npiv is supported. @@ -1042,7 +1042,7 @@ lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_poll_show: Return text about poll support for the adapter. + * lpfc_poll_show - Return text about poll support for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: on return contains the cfg_poll in hex. @@ -1064,7 +1064,7 @@ lpfc_poll_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_poll_store: Set the value of cfg_poll for the adapter. + * lpfc_poll_store - Set the value of cfg_poll for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: one or more lpfc_polling_flags values. @@ -1136,7 +1136,7 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr, } /** - * lpfc_param_show: Return a cfg attribute value in decimal. + * lpfc_param_show - Return a cfg attribute value in decimal * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1164,7 +1164,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_param_hex_show: Return a cfg attribute value in hex. + * lpfc_param_hex_show - Return a cfg attribute value in hex * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1173,7 +1173,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ * lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the attribute value in hexidecimal. + * @buf: on return contains the attribute value in hexadecimal. * * Returns: size of formatted string. **/ @@ -1192,7 +1192,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_param_init: Intializes a cfg attribute. + * lpfc_param_init - Intializes a cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1226,7 +1226,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, int val) \ } /** - * lpfc_param_set: Set a cfg attribute value. + * lpfc_param_set - Set a cfg attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1260,7 +1260,7 @@ lpfc_##attr##_set(struct lpfc_hba *phba, int val) \ } /** - * lpfc_param_store: Set a vport attribute value. + * lpfc_param_store - Set a vport attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1300,7 +1300,7 @@ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_vport_param_show: Return decimal formatted cfg attribute value. + * lpfc_vport_param_show - Return decimal formatted cfg attribute value * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1326,17 +1326,17 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_vport_param_hex_show: Return hex formatted attribute value. + * lpfc_vport_param_hex_show - Return hex formatted attribute value * * Description: * Macro that given an attr e.g. * hba_queue_depth expands into a function with the name * lpfc_hba_queue_depth_show * - * lpfc_##attr##_show: prints the attribute value in hexidecimal. + * lpfc_##attr##_show: prints the attribute value in hexadecimal. * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the attribute value in hexidecimal. + * @buf: on return contains the attribute value in hexadecimal. * * Returns: length of formatted string. **/ @@ -1353,7 +1353,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ } /** - * lpfc_vport_param_init: Initialize a vport cfg attribute. + * lpfc_vport_param_init - Initialize a vport cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1386,7 +1386,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, int val) \ } /** - * lpfc_vport_param_set: Set a vport cfg attribute. + * lpfc_vport_param_set - Set a vport cfg attribute * * Description: * Macro that given an attr e.g. hba_queue_depth expands @@ -1417,7 +1417,7 @@ lpfc_##attr##_set(struct lpfc_vport *vport, int val) \ } /** - * lpfc_vport_param_store: Set a vport attribute. + * lpfc_vport_param_store - Set a vport attribute * * Description: * Macro that given an attr e.g. hba_queue_depth @@ -1576,7 +1576,7 @@ static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL); static char *lpfc_soft_wwn_key = "C99G71SL8032A"; /** - * lpfc_soft_wwn_enable_store: Allows setting of the wwn if the key is valid. + * lpfc_soft_wwn_enable_store - Allows setting of the wwn if the key is valid * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. * @buf: containing the string lpfc_soft_wwn_key. @@ -1623,10 +1623,10 @@ static DEVICE_ATTR(lpfc_soft_wwn_enable, S_IWUSR, NULL, lpfc_soft_wwn_enable_store); /** - * lpfc_soft_wwpn_show: Return the cfg soft ww port name of the adapter. + * lpfc_soft_wwpn_show - Return the cfg soft ww port name of the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the wwpn in hexidecimal. + * @buf: on return contains the wwpn in hexadecimal. * * Returns: size of formatted string. **/ @@ -1643,10 +1643,10 @@ lpfc_soft_wwpn_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_soft_wwpn_store: Set the ww port name of the adapter. + * lpfc_soft_wwpn_store - Set the ww port name of the adapter * @dev class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: contains the wwpn in hexidecimal. + * @buf: contains the wwpn in hexadecimal. * @count: number of wwpn bytes in buf * * Returns: @@ -1729,10 +1729,10 @@ static DEVICE_ATTR(lpfc_soft_wwpn, S_IRUGO | S_IWUSR,\ lpfc_soft_wwpn_show, lpfc_soft_wwpn_store); /** - * lpfc_soft_wwnn_show: Return the cfg soft ww node name for the adapter. + * lpfc_soft_wwnn_show - Return the cfg soft ww node name for the adapter * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: on return contains the wwnn in hexidecimal. + * @buf: on return contains the wwnn in hexadecimal. * * Returns: size of formatted string. **/ @@ -1747,9 +1747,9 @@ lpfc_soft_wwnn_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_soft_wwnn_store: sets the ww node name of the adapter. + * lpfc_soft_wwnn_store - sets the ww node name of the adapter * @cdev: class device that is converted into a Scsi_host. - * @buf: contains the ww node name in hexidecimal. + * @buf: contains the ww node name in hexadecimal. * @count: number of wwnn bytes in buf. * * Returns: @@ -1845,7 +1845,7 @@ MODULE_PARM_DESC(lpfc_nodev_tmo, "for a device to come back"); /** - * lpfc_nodev_tmo_show: Return the hba dev loss timeout value. + * lpfc_nodev_tmo_show - Return the hba dev loss timeout value * @dev: class converted to a Scsi_host structure. * @attr: device attribute, not used. * @buf: on return contains the dev loss timeout in decimal. @@ -1864,7 +1864,7 @@ lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr, } /** - * lpfc_nodev_tmo_init: Set the hba nodev timeout value. + * lpfc_nodev_tmo_init - Set the hba nodev timeout value * @vport: lpfc vport structure pointer. * @val: contains the nodev timeout value. * @@ -1905,7 +1905,7 @@ lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val) } /** - * lpfc_update_rport_devloss_tmo: Update dev loss tmo value. + * lpfc_update_rport_devloss_tmo - Update dev loss tmo value * @vport: lpfc vport structure pointer. * * Description: @@ -1926,7 +1926,7 @@ lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport) } /** - * lpfc_nodev_tmo_set: Set the vport nodev tmo and devloss tmo values. + * lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values * @vport: lpfc vport structure pointer. * @val: contains the tmo value. * @@ -1982,7 +1982,7 @@ lpfc_vport_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO, lpfc_vport_param_show(devloss_tmo) /** - * lpfc_devloss_tmo_set: Sets vport nodev tmo, devloss tmo values, changed bit. + * lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit * @vport: lpfc vport structure pointer. * @val: contains the tmo value. * @@ -2094,7 +2094,7 @@ MODULE_PARM_DESC(lpfc_restrict_login, lpfc_vport_param_show(restrict_login); /** - * lpfc_restrict_login_init: Set the vport restrict login flag. + * lpfc_restrict_login_init - Set the vport restrict login flag * @vport: lpfc vport structure pointer. * @val: contains the restrict login value. * @@ -2128,7 +2128,7 @@ lpfc_restrict_login_init(struct lpfc_vport *vport, int val) } /** - * lpfc_restrict_login_set: Set the vport restrict login flag. + * lpfc_restrict_login_set - Set the vport restrict login flag * @vport: lpfc vport structure pointer. * @val: contains the restrict login value. * @@ -2201,7 +2201,7 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1, */ /** - * lpfc_topology_set: Set the adapters topology field. + * lpfc_topology_set - Set the adapters topology field * @phba: lpfc_hba pointer. * @val: topology value. * @@ -2216,18 +2216,41 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1, * non-zero return value from lpfc_issue_lip() * -EINVAL val out of range **/ -static int -lpfc_topology_set(struct lpfc_hba *phba, int val) +static ssize_t +lpfc_topology_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0; + int nolip = 0; + const char *val_buf = buf; int err; uint32_t prev_val; + + if (!strncmp(buf, "nolip ", strlen("nolip "))) { + nolip = 1; + val_buf = &buf[strlen("nolip ")]; + } + + if (!isdigit(val_buf[0])) + return -EINVAL; + if (sscanf(val_buf, "%i", &val) != 1) + return -EINVAL; + if (val >= 0 && val <= 6) { prev_val = phba->cfg_topology; phba->cfg_topology = val; + if (nolip) + return strlen(buf); + err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); - if (err) + if (err) { phba->cfg_topology = prev_val; - return err; + return -EINVAL; + } else + return strlen(buf); } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "%d:0467 lpfc_topology attribute cannot be set to %d, " @@ -2240,14 +2263,12 @@ module_param(lpfc_topology, int, 0); MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology"); lpfc_param_show(topology) lpfc_param_init(topology, 0, 0, 6) -lpfc_param_store(topology) static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR, lpfc_topology_show, lpfc_topology_store); /** - * lpfc_stat_data_ctrl_store: write call back for lpfc_stat_data_ctrl - * sysfs file. + * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file * @dev: Pointer to class device. * @buf: Data buffer. * @count: Size of the data buffer. @@ -2282,7 +2303,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr, unsigned long base, step, bucket_type; if (!strncmp(buf, "setbucket", strlen("setbucket"))) { - if (strlen(buf) > LPFC_MAX_DATA_CTRL_LEN) + if (strlen(buf) > (LPFC_MAX_DATA_CTRL_LEN - 1)) return -EINVAL; strcpy(bucket_data, buf); @@ -2411,8 +2432,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr, /** - * lpfc_stat_data_ctrl_show: Read callback function for - * lpfc_stat_data_ctrl sysfs file. + * lpfc_stat_data_ctrl_show - Read function for lpfc_stat_data_ctrl sysfs file * @dev: Pointer to class device object. * @buf: Data buffer. * @@ -2489,8 +2509,7 @@ static DEVICE_ATTR(lpfc_stat_data_ctrl, S_IRUGO | S_IWUSR, /** - * sysfs_drvr_stat_data_read: Read callback function for lpfc_drvr_stat_data - * sysfs attribute. + * sysfs_drvr_stat_data_read - Read function for lpfc_drvr_stat_data attribute * @kobj: Pointer to the kernel object * @bin_attr: Attribute object * @buff: Buffer pointer @@ -2585,7 +2604,7 @@ static struct bin_attribute sysfs_drvr_stat_data_attr = { */ /** - * lpfc_link_speed_set: Set the adapters link speed. + * lpfc_link_speed_set - Set the adapters link speed * @phba: lpfc_hba pointer. * @val: link speed value. * @@ -2601,12 +2620,29 @@ static struct bin_attribute sysfs_drvr_stat_data_attr = { * non-zero return value from lpfc_issue_lip() * -EINVAL val out of range **/ -static int -lpfc_link_speed_set(struct lpfc_hba *phba, int val) +static ssize_t +lpfc_link_speed_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + int val = 0; + int nolip = 0; + const char *val_buf = buf; int err; uint32_t prev_val; + if (!strncmp(buf, "nolip ", strlen("nolip "))) { + nolip = 1; + val_buf = &buf[strlen("nolip ")]; + } + + if (!isdigit(val_buf[0])) + return -EINVAL; + if (sscanf(val_buf, "%i", &val) != 1) + return -EINVAL; + if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) || ((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) || ((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) || @@ -2614,14 +2650,19 @@ lpfc_link_speed_set(struct lpfc_hba *phba, int val) ((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb))) return -EINVAL; - if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED) + if ((val >= 0 && val <= 8) && (LPFC_LINK_SPEED_BITMAP & (1 << val))) { prev_val = phba->cfg_link_speed; phba->cfg_link_speed = val; + if (nolip) + return strlen(buf); + err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); - if (err) + if (err) { phba->cfg_link_speed = prev_val; - return err; + return -EINVAL; + } else + return strlen(buf); } lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -2637,7 +2678,7 @@ MODULE_PARM_DESC(lpfc_link_speed, "Select link speed"); lpfc_param_show(link_speed) /** - * lpfc_link_speed_init: Set the adapters link speed. + * lpfc_link_speed_init - Set the adapters link speed * @phba: lpfc_hba pointer. * @val: link speed value. * @@ -2668,7 +2709,6 @@ lpfc_link_speed_init(struct lpfc_hba *phba, int val) return -EINVAL; } -lpfc_param_store(link_speed) static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR, lpfc_link_speed_show, lpfc_link_speed_store); @@ -2865,7 +2905,7 @@ MODULE_PARM_DESC(lpfc_prot_guard, "host protection guard type"); /* - * lpfc_sg_seg_cnt: Initial Maximum DMA Segment Count + * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count * This value can be set to values between 64 and 256. The default value is * 64, but may be increased to allow for larger Max I/O sizes. The scsi layer * will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE). @@ -2967,7 +3007,7 @@ struct device_attribute *lpfc_vport_attrs[] = { }; /** - * sysfs_ctlreg_write: Write method for writing to ctlreg. + * sysfs_ctlreg_write - Write method for writing to ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be written to the adapter IOREG space. @@ -3017,7 +3057,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr, } /** - * sysfs_ctlreg_read: Read method for reading from ctlreg. + * sysfs_ctlreg_read - Read method for reading from ctlreg * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: if succesful contains the data from the adapter IOREG space. @@ -3078,7 +3118,7 @@ static struct bin_attribute sysfs_ctlreg_attr = { }; /** - * sysfs_mbox_idle: frees the sysfs mailbox. + * sysfs_mbox_idle - frees the sysfs mailbox * @phba: lpfc_hba pointer **/ static void @@ -3095,7 +3135,7 @@ sysfs_mbox_idle(struct lpfc_hba *phba) } /** - * sysfs_mbox_write: Write method for writing information via mbox. + * sysfs_mbox_write - Write method for writing information via mbox * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be written to sysfs mbox. @@ -3170,7 +3210,7 @@ sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr, } /** - * sysfs_mbox_read: Read method for reading information via mbox. + * sysfs_mbox_read - Read method for reading information via mbox * @kobj: kernel kobject that contains the kernel class device. * @bin_attr: kernel attributes passed to us. * @buf: contains the data to be read from sysfs mbox. @@ -3374,7 +3414,7 @@ static struct bin_attribute sysfs_mbox_attr = { }; /** - * lpfc_alloc_sysfs_attr: Creates the ctlreg and mbox entries. + * lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries * @vport: address of lpfc vport structure. * * Return codes: @@ -3415,7 +3455,7 @@ out: } /** - * lpfc_free_sysfs_attr: Removes the ctlreg and mbox entries. + * lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries * @vport: address of lpfc vport structure. **/ void @@ -3437,7 +3477,7 @@ lpfc_free_sysfs_attr(struct lpfc_vport *vport) */ /** - * lpfc_get_host_port_id: Copy the vport DID into the scsi host port id. + * lpfc_get_host_port_id - Copy the vport DID into the scsi host port id * @shost: kernel scsi host pointer. **/ static void @@ -3450,7 +3490,7 @@ lpfc_get_host_port_id(struct Scsi_Host *shost) } /** - * lpfc_get_host_port_type: Set the value of the scsi host port type. + * lpfc_get_host_port_type - Set the value of the scsi host port type * @shost: kernel scsi host pointer. **/ static void @@ -3482,7 +3522,7 @@ lpfc_get_host_port_type(struct Scsi_Host *shost) } /** - * lpfc_get_host_port_state: Set the value of the scsi host port state. + * lpfc_get_host_port_state - Set the value of the scsi host port state * @shost: kernel scsi host pointer. **/ static void @@ -3520,7 +3560,7 @@ lpfc_get_host_port_state(struct Scsi_Host *shost) } /** - * lpfc_get_host_speed: Set the value of the scsi host speed. + * lpfc_get_host_speed - Set the value of the scsi host speed * @shost: kernel scsi host pointer. **/ static void @@ -3556,7 +3596,7 @@ lpfc_get_host_speed(struct Scsi_Host *shost) } /** - * lpfc_get_host_fabric_name: Set the value of the scsi host fabric name. + * lpfc_get_host_fabric_name - Set the value of the scsi host fabric name * @shost: kernel scsi host pointer. **/ static void @@ -3582,7 +3622,7 @@ lpfc_get_host_fabric_name (struct Scsi_Host *shost) } /** - * lpfc_get_stats: Return statistical information about the adapter. + * lpfc_get_stats - Return statistical information about the adapter * @shost: kernel scsi host pointer. * * Notes: @@ -3707,7 +3747,7 @@ lpfc_get_stats(struct Scsi_Host *shost) } /** - * lpfc_reset_stats: Copy the adapter link stats information. + * lpfc_reset_stats - Copy the adapter link stats information * @shost: kernel scsi host pointer. **/ static void @@ -3788,7 +3828,7 @@ lpfc_reset_stats(struct Scsi_Host *shost) */ /** - * lpfc_get_node_by_target: Return the nodelist for a target. + * lpfc_get_node_by_target - Return the nodelist for a target * @starget: kernel scsi target pointer. * * Returns: @@ -3817,7 +3857,7 @@ lpfc_get_node_by_target(struct scsi_target *starget) } /** - * lpfc_get_starget_port_id: Set the target port id to the ndlp DID or -1. + * lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -1 * @starget: kernel scsi target pointer. **/ static void @@ -3829,7 +3869,7 @@ lpfc_get_starget_port_id(struct scsi_target *starget) } /** - * lpfc_get_starget_node_name: Set the target node name. + * lpfc_get_starget_node_name - Set the target node name * @starget: kernel scsi target pointer. * * Description: Set the target node name to the ndlp node name wwn or zero. @@ -3844,7 +3884,7 @@ lpfc_get_starget_node_name(struct scsi_target *starget) } /** - * lpfc_get_starget_port_name: Set the target port name. + * lpfc_get_starget_port_name - Set the target port name * @starget: kernel scsi target pointer. * * Description: set the target port name to the ndlp port name wwn or zero. @@ -3859,7 +3899,7 @@ lpfc_get_starget_port_name(struct scsi_target *starget) } /** - * lpfc_set_rport_loss_tmo: Set the rport dev loss tmo. + * lpfc_set_rport_loss_tmo - Set the rport dev loss tmo * @rport: fc rport address. * @timeout: new value for dev loss tmo. * @@ -3877,7 +3917,7 @@ lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout) } /** - * lpfc_rport_show_function: Return rport target information. + * lpfc_rport_show_function - Return rport target information * * Description: * Macro that uses field to generate a function with the name lpfc_show_rport_ @@ -3905,7 +3945,7 @@ lpfc_show_rport_##field (struct device *dev, \ static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL) /** - * lpfc_set_vport_symbolic_name: Set the vport's symbolic name. + * lpfc_set_vport_symbolic_name - Set the vport's symbolic name * @fc_vport: The fc_vport who's symbolic name has been changed. * * Description: @@ -4048,7 +4088,7 @@ struct fc_function_template lpfc_vport_transport_functions = { }; /** - * lpfc_get_cfgparam: Used during probe_one to init the adapter structure. + * lpfc_get_cfgparam - Used during probe_one to init the adapter structure * @phba: lpfc_hba pointer. **/ void @@ -4097,7 +4137,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) } /** - * lpfc_get_vport_cfgparam: Used during port create, init the vport structure. + * lpfc_get_vport_cfgparam - Used during port create, init the vport structure * @vport: lpfc_vport pointer. **/ void diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 07f4976319a5..f88ce3f26190 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -184,6 +184,8 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *); struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *); void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *); uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *); +void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t, + uint32_t); void lpfc_reset_barrier(struct lpfc_hba * phba); int lpfc_sli_brdready(struct lpfc_hba *, uint32_t); diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 81cdcf46c471..52be5644e07a 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -47,7 +47,7 @@ #include "lpfc_debugfs.h" #ifdef CONFIG_SCSI_LPFC_DEBUG_FS -/** +/* * debugfs interface * * To access this interface the user should: @@ -95,7 +95,7 @@ module_param(lpfc_debugfs_max_slow_ring_trc, int, 0); MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc, "Set debugfs slow ring trace depth"); -int lpfc_debugfs_mask_disc_trc; +static int lpfc_debugfs_mask_disc_trc; module_param(lpfc_debugfs_mask_disc_trc, int, 0); MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc, "Set debugfs discovery trace mask"); @@ -127,7 +127,7 @@ static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0); static unsigned long lpfc_debugfs_start_time = 0L; /** - * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer. + * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer * @vport: The vport to gather the log info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -187,7 +187,7 @@ lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size) } /** - * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer. + * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer * @phba: The HBA to gather the log info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -250,7 +250,7 @@ lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size) static int lpfc_debugfs_last_hbq = -1; /** - * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer. + * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer * @phba: The HBA to gather host buffer info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -369,7 +369,7 @@ skipit: static int lpfc_debugfs_last_hba_slim_off; /** - * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer. + * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer * @phba: The HBA to gather SLIM info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -399,8 +399,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) len += snprintf(buf+len, size-len, "HBA SLIM\n"); lpfc_memcpy_from_slim(buffer, - ((uint8_t *)phba->MBslimaddr) + lpfc_debugfs_last_hba_slim_off, - 1024); + phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024); ptr = (uint32_t *)&buffer[0]; off = lpfc_debugfs_last_hba_slim_off; @@ -426,7 +425,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) } /** - * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer. + * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer * @phba: The HBA to gather Host SLIM info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -501,7 +500,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) } /** - * lpfc_debugfs_nodelist_data - Dump target node list to a buffer. + * lpfc_debugfs_nodelist_data - Dump target node list to a buffer * @vport: The vport to gather target node info from. * @buf: The buffer to dump log into. * @size: The maximum amount of data to process. @@ -599,7 +598,7 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) #endif /** - * lpfc_debugfs_disc_trc - Store discovery trace log. + * lpfc_debugfs_disc_trc - Store discovery trace log * @vport: The vport to associate this trace string with for retrieval. * @mask: Log entry classification. * @fmt: Format string to be displayed when dumping the log. @@ -643,7 +642,7 @@ lpfc_debugfs_disc_trc(struct lpfc_vport *vport, int mask, char *fmt, } /** - * lpfc_debugfs_slow_ring_trc - Store slow ring trace log. + * lpfc_debugfs_slow_ring_trc - Store slow ring trace log * @phba: The phba to associate this trace string with for retrieval. * @fmt: Format string to be displayed when dumping the log. * @data1: 1st data parameter to be applied to @fmt. @@ -682,7 +681,7 @@ lpfc_debugfs_slow_ring_trc(struct lpfc_hba *phba, char *fmt, #ifdef CONFIG_SCSI_LPFC_DEBUG_FS /** - * lpfc_debugfs_disc_trc_open - Open the discovery trace log. + * lpfc_debugfs_disc_trc_open - Open the discovery trace log * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -732,7 +731,7 @@ out: } /** - * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log. + * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -782,7 +781,7 @@ out: } /** - * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer. + * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -824,7 +823,7 @@ out: } /** - * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer. + * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -866,7 +865,7 @@ out: } /** - * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer. + * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -993,7 +992,7 @@ lpfc_debugfs_dumpDataDif_write(struct file *file, const char __user *buf, /** - * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file. + * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file * @inode: The inode pointer that contains a vport pointer. * @file: The file pointer to attach the log output. * @@ -1035,7 +1034,7 @@ out: } /** - * lpfc_debugfs_lseek - Seek through a debugfs file. + * lpfc_debugfs_lseek - Seek through a debugfs file * @file: The file pointer to seek through. * @off: The offset to seek to or the amount to seek by. * @whence: Indicates how to seek. @@ -1073,7 +1072,7 @@ lpfc_debugfs_lseek(struct file *file, loff_t off, int whence) } /** - * lpfc_debugfs_read - Read a debugfs file. + * lpfc_debugfs_read - Read a debugfs file * @file: The file pointer to read from. * @buf: The buffer to copy the data to. * @nbytes: The number of bytes to read. @@ -1098,7 +1097,7 @@ lpfc_debugfs_read(struct file *file, char __user *buf, } /** - * lpfc_debugfs_release - Release the buffer used to store debugfs file data. + * lpfc_debugfs_release - Release the buffer used to store debugfs file data * @inode: The inode pointer that contains a vport pointer. (unused) * @file: The file pointer that contains the buffer to release. * @@ -1210,7 +1209,7 @@ static atomic_t lpfc_debugfs_hba_count; #endif /** - * lpfc_debugfs_initialize - Initialize debugfs for a vport. + * lpfc_debugfs_initialize - Initialize debugfs for a vport * @vport: The vport pointer to initialize. * * Description: @@ -1434,7 +1433,7 @@ debug_failed: } /** - * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport. + * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport * @vport: The vport pointer to remove from debugfs. * * Description: diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h index f29e548a90d1..ffd108972072 100644 --- a/drivers/scsi/lpfc/lpfc_disc.h +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -99,6 +99,7 @@ struct lpfc_nodelist { #define NLP_USG_FREE_ACK_BIT 0x8 /* Indicate ndlp memory free invoked */ struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */ + struct lpfc_hba *phba; struct fc_rport *rport; /* Corresponding FC transport port structure */ struct lpfc_vport *vport; diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index a7302480bc4a..b8b34cf5c3d2 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -55,7 +55,7 @@ static void lpfc_register_new_vport(struct lpfc_hba *phba, static int lpfc_max_els_tries = 3; /** - * lpfc_els_chk_latt: Check host link attention event for a vport. + * lpfc_els_chk_latt - Check host link attention event for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine checks whether there is an outstanding host link @@ -116,7 +116,7 @@ lpfc_els_chk_latt(struct lpfc_vport *vport) } /** - * lpfc_prep_els_iocb: Allocate and prepare a lpfc iocb data structure. + * lpfc_prep_els_iocb - Allocate and prepare a lpfc iocb data structure * @vport: pointer to a host virtual N_Port data structure. * @expectRsp: flag indicating whether response is expected. * @cmdSize: size of the ELS command. @@ -290,7 +290,7 @@ els_iocb_free_pcmb_exit: } /** - * lpfc_issue_fabric_reglogin: Issue fabric registration login for a vport. + * lpfc_issue_fabric_reglogin - Issue fabric registration login for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues a fabric registration login for a @vport. An @@ -386,7 +386,7 @@ fail: } /** - * lpfc_cmpl_els_flogi_fabric: Completion function for flogi to a fabric port. + * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @sp: pointer to service parameter data structure. @@ -509,7 +509,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_cmpl_els_flogi_nport: Completion function for flogi to an N_Port. + * lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @sp: pointer to service parameter data structure. @@ -626,7 +626,7 @@ fail: } /** - * lpfc_cmpl_els_flogi: Completion callback function for flogi. + * lpfc_cmpl_els_flogi - Completion callback function for flogi * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -751,7 +751,7 @@ out: } /** - * lpfc_issue_els_flogi: Issue an flogi iocb command for a vport. + * lpfc_issue_els_flogi - Issue an flogi iocb command for a vport * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -849,7 +849,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_els_abort_flogi: Abort all outstanding flogi iocbs. + * lpfc_els_abort_flogi - Abort all outstanding flogi iocbs * @phba: pointer to lpfc hba data structure. * * This routine aborts all the outstanding Fabric Login (FLOGI) IOCBs @@ -898,7 +898,7 @@ lpfc_els_abort_flogi(struct lpfc_hba *phba) } /** - * lpfc_initial_flogi: Issue an initial fabric login for a vport. + * lpfc_initial_flogi - Issue an initial fabric login for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues an initial Fabric Login (FLOGI) for the @vport @@ -949,7 +949,7 @@ lpfc_initial_flogi(struct lpfc_vport *vport) } /** - * lpfc_initial_fdisc: Issue an initial fabric discovery for a vport. + * lpfc_initial_fdisc - Issue an initial fabric discovery for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues an initial Fabric Discover (FDISC) for the @vport @@ -998,7 +998,7 @@ lpfc_initial_fdisc(struct lpfc_vport *vport) } /** - * lpfc_more_plogi: Check and issue remaining plogis for a vport. + * lpfc_more_plogi - Check and issue remaining plogis for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine checks whether there are more remaining Port Logins @@ -1031,7 +1031,7 @@ lpfc_more_plogi(struct lpfc_vport *vport) } /** - * lpfc_plogi_confirm_nport: Confirm pologi wwpn matches stored ndlp. + * lpfc_plogi_confirm_nport - Confirm pologi wwpn matches stored ndlp * @phba: pointer to lpfc hba data structure. * @prsp: pointer to response IOCB payload. * @ndlp: pointer to a node-list data structure. @@ -1165,7 +1165,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, } /** - * lpfc_end_rscn: Check and handle more rscn for a vport. + * lpfc_end_rscn - Check and handle more rscn for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine checks whether more Registration State Change @@ -1197,7 +1197,7 @@ lpfc_end_rscn(struct lpfc_vport *vport) } /** - * lpfc_cmpl_els_plogi: Completion callback function for plogi. + * lpfc_cmpl_els_plogi - Completion callback function for plogi * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1322,7 +1322,7 @@ out: } /** - * lpfc_issue_els_plogi: Issue an plogi iocb command for a vport. + * lpfc_issue_els_plogi - Issue an plogi iocb command for a vport * @vport: pointer to a host virtual N_Port data structure. * @did: destination port identifier. * @retry: number of retries to the command IOCB. @@ -1401,7 +1401,7 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry) } /** - * lpfc_cmpl_els_prli: Completion callback function for prli. + * lpfc_cmpl_els_prli - Completion callback function for prli * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1472,7 +1472,7 @@ out: } /** - * lpfc_issue_els_prli: Issue a prli iocb command for a vport. + * lpfc_issue_els_prli - Issue a prli iocb command for a vport * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -1562,7 +1562,7 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_rscn_disc: Perform rscn discovery for a vport. + * lpfc_rscn_disc - Perform rscn discovery for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine performs Registration State Change Notification (RSCN) @@ -1588,7 +1588,7 @@ lpfc_rscn_disc(struct lpfc_vport *vport) } /** - * lpfc_adisc_done: Complete the adisc phase of discovery. + * lpfc_adisc_done - Complete the adisc phase of discovery * @vport: pointer to lpfc_vport hba data structure that finished all ADISCs. * * This function is called when the final ADISC is completed during discovery. @@ -1639,7 +1639,7 @@ lpfc_adisc_done(struct lpfc_vport *vport) } /** - * lpfc_more_adisc: Issue more adisc as needed. + * lpfc_more_adisc - Issue more adisc as needed * @vport: pointer to a host virtual N_Port data structure. * * This routine determines whether there are more ndlps on a @vport @@ -1672,7 +1672,7 @@ lpfc_more_adisc(struct lpfc_vport *vport) } /** - * lpfc_cmpl_els_adisc: Completion callback function for adisc. + * lpfc_cmpl_els_adisc - Completion callback function for adisc * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1760,7 +1760,7 @@ out: } /** - * lpfc_issue_els_adisc: Issue an address discover iocb to an node on a vport. + * lpfc_issue_els_adisc - Issue an address discover iocb to an node on a vport * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -1833,7 +1833,7 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_cmpl_els_logo: Completion callback function for logo. + * lpfc_cmpl_els_logo - Completion callback function for logo * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -1910,7 +1910,7 @@ out: } /** - * lpfc_issue_els_logo: Issue a logo to an node on a vport. + * lpfc_issue_els_logo - Issue a logo to an node on a vport * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -1991,7 +1991,7 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_cmpl_els_cmd: Completion callback function for generic els command. + * lpfc_cmpl_els_cmd - Completion callback function for generic els command * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -2031,7 +2031,7 @@ lpfc_cmpl_els_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_issue_els_scr: Issue a scr to an node on a vport. + * lpfc_issue_els_scr - Issue a scr to an node on a vport * @vport: pointer to a host virtual N_Port data structure. * @nportid: N_Port identifier to the remote node. * @retry: number of retries to the command IOCB. @@ -2125,7 +2125,7 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) } /** - * lpfc_issue_els_farpr: Issue a farp to an node on a vport. + * lpfc_issue_els_farpr - Issue a farp to an node on a vport * @vport: pointer to a host virtual N_Port data structure. * @nportid: N_Port identifier to the remote node. * @retry: number of retries to the command IOCB. @@ -2236,7 +2236,7 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) } /** - * lpfc_cancel_retry_delay_tmo: Cancel the timer with delayed iocb-cmd retry. + * lpfc_cancel_retry_delay_tmo - Cancel the timer with delayed iocb-cmd retry * @vport: pointer to a host virtual N_Port data structure. * @nlp: pointer to a node-list data structure. * @@ -2291,7 +2291,7 @@ lpfc_cancel_retry_delay_tmo(struct lpfc_vport *vport, struct lpfc_nodelist *nlp) } /** - * lpfc_els_retry_delay: Timer function with a ndlp delayed function timer. + * lpfc_els_retry_delay - Timer function with a ndlp delayed function timer * @ptr: holder for the pointer to the timer function associated data (ndlp). * * This routine is invoked by the ndlp delayed-function timer to check @@ -2333,7 +2333,7 @@ lpfc_els_retry_delay(unsigned long ptr) } /** - * lpfc_els_retry_delay_handler: Work thread handler for ndlp delayed function. + * lpfc_els_retry_delay_handler - Work thread handler for ndlp delayed function * @ndlp: pointer to a node-list data structure. * * This routine is the worker-thread handler for processing the @ndlp delayed @@ -2404,7 +2404,7 @@ lpfc_els_retry_delay_handler(struct lpfc_nodelist *ndlp) } /** - * lpfc_els_retry: Make retry decision on an els command iocb. + * lpfc_els_retry - Make retry decision on an els command iocb * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -2732,7 +2732,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_free_data: Free lpfc dma buffer and data structure with an iocb. + * lpfc_els_free_data - Free lpfc dma buffer and data structure with an iocb * @phba: pointer to lpfc hba data structure. * @buf_ptr1: pointer to the lpfc DMA buffer data structure. * @@ -2764,7 +2764,7 @@ lpfc_els_free_data(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr1) } /** - * lpfc_els_free_bpl: Free lpfc dma buffer and data structure with bpl. + * lpfc_els_free_bpl - Free lpfc dma buffer and data structure with bpl * @phba: pointer to lpfc hba data structure. * @buf_ptr: pointer to the lpfc dma buffer data structure. * @@ -2784,7 +2784,7 @@ lpfc_els_free_bpl(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr) } /** - * lpfc_els_free_iocb: Free a command iocb and its associated resources. + * lpfc_els_free_iocb - Free a command iocb and its associated resources * @phba: pointer to lpfc hba data structure. * @elsiocb: pointer to lpfc els command iocb data structure. * @@ -2877,7 +2877,7 @@ lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) } /** - * lpfc_cmpl_els_logo_acc: Completion callback function to logo acc response. + * lpfc_cmpl_els_logo_acc - Completion callback function to logo acc response * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -2931,7 +2931,7 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_mbx_cmpl_dflt_rpi: Completion callbk func for unreg dflt rpi mbox cmd. + * lpfc_mbx_cmpl_dflt_rpi - Completion callbk func for unreg dflt rpi mbox cmd * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -2965,7 +2965,7 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_cmpl_els_rsp: Completion callback function for els response iocb cmd. + * lpfc_cmpl_els_rsp - Completion callback function for els response iocb cmd * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -3136,7 +3136,7 @@ out: } /** - * lpfc_els_rsp_acc: Prepare and issue an acc response iocb command. + * lpfc_els_rsp_acc - Prepare and issue an acc response iocb command * @vport: pointer to a host virtual N_Port data structure. * @flag: the els command code to be accepted. * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -3275,7 +3275,7 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag, } /** - * lpfc_els_rsp_reject: Propare and issue a rjt response iocb command. + * lpfc_els_rsp_reject - Propare and issue a rjt response iocb command * @vport: pointer to a virtual N_Port data structure. * @rejectError: * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -3356,7 +3356,7 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError, } /** - * lpfc_els_rsp_adisc_acc: Prepare and issue acc response to adisc iocb cmd. + * lpfc_els_rsp_adisc_acc - Prepare and issue acc response to adisc iocb cmd * @vport: pointer to a virtual N_Port data structure. * @oldiocb: pointer to the original lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -3431,7 +3431,7 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, } /** - * lpfc_els_rsp_prli_acc: Prepare and issue acc response to prli iocb cmd. + * lpfc_els_rsp_prli_acc - Prepare and issue acc response to prli iocb cmd * @vport: pointer to a virtual N_Port data structure. * @oldiocb: pointer to the original lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -3529,7 +3529,7 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb, } /** - * lpfc_els_rsp_rnid_acc: Issue rnid acc response iocb command. + * lpfc_els_rsp_rnid_acc - Issue rnid acc response iocb command * @vport: pointer to a virtual N_Port data structure. * @format: rnid command format. * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -3635,7 +3635,7 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format, } /** - * lpfc_els_disc_adisc: Issue remaining adisc iocbs to npr nodes of a vport. + * lpfc_els_disc_adisc - Issue remaining adisc iocbs to npr nodes of a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine issues Address Discover (ADISC) ELS commands to those @@ -3693,7 +3693,7 @@ lpfc_els_disc_adisc(struct lpfc_vport *vport) } /** - * lpfc_els_disc_plogi: Issue plogi for all npr nodes of a vport before adisc. + * lpfc_els_disc_plogi - Issue plogi for all npr nodes of a vport before adisc * @vport: pointer to a host virtual N_Port data structure. * * This routine issues Port Login (PLOGI) ELS commands to all the N_Ports @@ -3752,7 +3752,7 @@ lpfc_els_disc_plogi(struct lpfc_vport *vport) } /** - * lpfc_els_flush_rscn: Clean up any rscn activities with a vport. + * lpfc_els_flush_rscn - Clean up any rscn activities with a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine cleans up any Registration State Change Notification @@ -3791,7 +3791,7 @@ lpfc_els_flush_rscn(struct lpfc_vport *vport) } /** - * lpfc_rscn_payload_check: Check whether there is a pending rscn to a did. + * lpfc_rscn_payload_check - Check whether there is a pending rscn to a did * @vport: pointer to a host virtual N_Port data structure. * @did: remote destination port identifier. * @@ -3866,7 +3866,7 @@ return_did_out: } /** - * lpfc_rscn_recovery_check: Send recovery event to vport nodes matching rscn + * lpfc_rscn_recovery_check - Send recovery event to vport nodes matching rscn * @vport: pointer to a host virtual N_Port data structure. * * This routine sends recovery (NLP_EVT_DEVICE_RECOVERY) event to the @@ -3895,7 +3895,7 @@ lpfc_rscn_recovery_check(struct lpfc_vport *vport) } /** - * lpfc_send_rscn_event: Send an RSCN event to management application. + * lpfc_send_rscn_event - Send an RSCN event to management application * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @@ -3938,7 +3938,7 @@ lpfc_send_rscn_event(struct lpfc_vport *vport, } /** - * lpfc_els_rcv_rscn: Process an unsolicited rscn iocb. + * lpfc_els_rcv_rscn - Process an unsolicited rscn iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4134,7 +4134,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_handle_rscn: Handle rscn for a vport. + * lpfc_els_handle_rscn - Handle rscn for a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine handles the Registration State Configuration Notification @@ -4222,7 +4222,7 @@ lpfc_els_handle_rscn(struct lpfc_vport *vport) } /** - * lpfc_els_rcv_flogi: Process an unsolicited flogi iocb. + * lpfc_els_rcv_flogi - Process an unsolicited flogi iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4336,7 +4336,7 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_rnid: Process an unsolicited rnid iocb. + * lpfc_els_rcv_rnid - Process an unsolicited rnid iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4391,7 +4391,7 @@ lpfc_els_rcv_rnid(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_lirr: Process an unsolicited lirr iocb. + * lpfc_els_rcv_lirr - Process an unsolicited lirr iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4419,7 +4419,7 @@ lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rsp_rps_acc: Completion callbk func for MBX_READ_LNK_STAT mbox cmd. + * lpfc_els_rsp_rps_acc - Completion callbk func for MBX_READ_LNK_STAT mbox cmd * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -4513,7 +4513,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_els_rcv_rps: Process an unsolicited rps iocb. + * lpfc_els_rcv_rps - Process an unsolicited rps iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4590,7 +4590,7 @@ reject_out: } /** - * lpfc_els_rsp_rpl_acc: Issue an accept rpl els command. + * lpfc_els_rsp_rpl_acc - Issue an accept rpl els command * @vport: pointer to a host virtual N_Port data structure. * @cmdsize: size of the ELS command. * @oldiocb: pointer to the original lpfc command iocb data structure. @@ -4662,7 +4662,7 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize, } /** - * lpfc_els_rcv_rpl: Process an unsolicited rpl iocb. + * lpfc_els_rcv_rpl - Process an unsolicited rpl iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4721,7 +4721,7 @@ lpfc_els_rcv_rpl(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_farp: Process an unsolicited farp request els command. + * lpfc_els_rcv_farp - Process an unsolicited farp request els command * @vport: pointer to a virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4804,7 +4804,7 @@ lpfc_els_rcv_farp(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_farpr: Process an unsolicited farp response iocb. + * lpfc_els_rcv_farpr - Process an unsolicited farp response iocb * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @ndlp: pointer to a node-list data structure. @@ -4842,7 +4842,7 @@ lpfc_els_rcv_farpr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_rcv_fan: Process an unsolicited fan iocb command. + * lpfc_els_rcv_fan - Process an unsolicited fan iocb command * @vport: pointer to a host virtual N_Port data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @fan_ndlp: pointer to a node-list data structure. @@ -4890,7 +4890,7 @@ lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_els_timeout: Handler funciton to the els timer. + * lpfc_els_timeout - Handler funciton to the els timer * @ptr: holder for the timer function associated data. * * This routine is invoked by the ELS timer after timeout. It posts the ELS @@ -4919,7 +4919,7 @@ lpfc_els_timeout(unsigned long ptr) } /** - * lpfc_els_timeout_handler: Process an els timeout event. + * lpfc_els_timeout_handler - Process an els timeout event * @vport: pointer to a virtual N_Port data structure. * * This routine is the actual handler function that processes an ELS timeout @@ -4994,7 +4994,7 @@ lpfc_els_timeout_handler(struct lpfc_vport *vport) } /** - * lpfc_els_flush_cmd: Clean up the outstanding els commands to a vport. + * lpfc_els_flush_cmd - Clean up the outstanding els commands to a vport * @vport: pointer to a host virtual N_Port data structure. * * This routine is used to clean up all the outstanding ELS commands on a @@ -5058,25 +5058,15 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &piocb->iocb; - list_del_init(&piocb->list); - - if (!piocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, piocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } - } + /* Cancell all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); return; } /** - * lpfc_els_flush_all_cmd: Clean up all the outstanding els commands to a HBA. + * lpfc_els_flush_all_cmd - Clean up all the outstanding els commands to a HBA * @phba: pointer to lpfc hba data structure. * * This routine is used to clean up all the outstanding ELS commands on a @@ -5121,23 +5111,16 @@ lpfc_els_flush_all_cmd(struct lpfc_hba *phba) lpfc_sli_issue_abort_iotag(phba, pring, piocb); } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &piocb->iocb; - list_del_init(&piocb->list); - if (!piocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, piocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } - } + + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); + return; } /** - * lpfc_send_els_failure_event: Posts an ELS command failure event. + * lpfc_send_els_failure_event - Posts an ELS command failure event * @phba: Pointer to hba context object. * @cmdiocbp: Pointer to command iocb which reported error. * @rspiocbp: Pointer to response iocb which reported error. @@ -5204,7 +5187,7 @@ lpfc_send_els_failure_event(struct lpfc_hba *phba, } /** - * lpfc_send_els_event: Posts unsolicited els event. + * lpfc_send_els_event - Posts unsolicited els event * @vport: Pointer to vport object. * @ndlp: Pointer FC node object. * @cmd: ELS command code. @@ -5284,7 +5267,7 @@ lpfc_send_els_event(struct lpfc_vport *vport, /** - * lpfc_els_unsol_buffer: Process an unsolicited event data buffer. + * lpfc_els_unsol_buffer - Process an unsolicited event data buffer * @phba: pointer to lpfc hba data structure. * @pring: pointer to a SLI ring. * @vport: pointer to a host virtual N_Port data structure. @@ -5592,7 +5575,7 @@ dropit: } /** - * lpfc_find_vport_by_vpid: Find a vport on a HBA through vport identifier. + * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier * @phba: pointer to lpfc hba data structure. * @vpi: host virtual N_Port identifier. * @@ -5622,7 +5605,7 @@ lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi) } /** - * lpfc_els_unsol_event: Process an unsolicited event from an els sli ring. + * lpfc_els_unsol_event - Process an unsolicited event from an els sli ring * @phba: pointer to lpfc hba data structure. * @pring: pointer to a SLI ring. * @elsiocb: pointer to lpfc els iocb data structure. @@ -5710,7 +5693,7 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_do_scr_ns_plogi: Issue a plogi to the name server for scr. + * lpfc_do_scr_ns_plogi - Issue a plogi to the name server for scr * @phba: pointer to lpfc hba data structure. * @vport: pointer to a virtual N_Port data structure. * @@ -5781,7 +5764,7 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport) } /** - * lpfc_cmpl_reg_new_vport: Completion callback function to register new vport. + * lpfc_cmpl_reg_new_vport - Completion callback function to register new vport * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -5850,7 +5833,7 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_register_new_vport: Register a new vport with a HBA. + * lpfc_register_new_vport - Register a new vport with a HBA * @phba: pointer to lpfc hba data structure. * @vport: pointer to a host virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. @@ -5899,7 +5882,7 @@ mbox_err_exit: } /** - * lpfc_cmpl_els_fdisc: Completion function for fdisc iocb command. + * lpfc_cmpl_els_fdisc - Completion function for fdisc iocb command * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -6007,7 +5990,7 @@ out: } /** - * lpfc_issue_els_fdisc: Issue a fdisc iocb command. + * lpfc_issue_els_fdisc - Issue a fdisc iocb command * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @retry: number of retries to the command IOCB. @@ -6101,7 +6084,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } /** - * lpfc_cmpl_els_npiv_logo: Completion function with vport logo. + * lpfc_cmpl_els_npiv_logo - Completion function with vport logo * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -6136,7 +6119,7 @@ lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_issue_els_npiv_logo: Issue a logo off a vport. + * lpfc_issue_els_npiv_logo - Issue a logo off a vport * @vport: pointer to a virtual N_Port data structure. * @ndlp: pointer to a node-list data structure. * @@ -6197,7 +6180,7 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) } /** - * lpfc_fabric_block_timeout: Handler function to the fabric block timer. + * lpfc_fabric_block_timeout - Handler function to the fabric block timer * @ptr: holder for the timer function associated data. * * This routine is invoked by the fabric iocb block timer after @@ -6226,7 +6209,7 @@ lpfc_fabric_block_timeout(unsigned long ptr) } /** - * lpfc_resume_fabric_iocbs: Issue a fabric iocb from driver internal list. + * lpfc_resume_fabric_iocbs - Issue a fabric iocb from driver internal list * @phba: pointer to lpfc hba data structure. * * This routine issues one fabric iocb from the driver internal list to @@ -6285,7 +6268,7 @@ repeat: } /** - * lpfc_unblock_fabric_iocbs: Unblock issuing fabric iocb command. + * lpfc_unblock_fabric_iocbs - Unblock issuing fabric iocb command * @phba: pointer to lpfc hba data structure. * * This routine unblocks the issuing fabric iocb command. The function @@ -6303,7 +6286,7 @@ lpfc_unblock_fabric_iocbs(struct lpfc_hba *phba) } /** - * lpfc_block_fabric_iocbs: Block issuing fabric iocb command. + * lpfc_block_fabric_iocbs - Block issuing fabric iocb command * @phba: pointer to lpfc hba data structure. * * This routine blocks the issuing fabric iocb for a specified amount of @@ -6325,7 +6308,7 @@ lpfc_block_fabric_iocbs(struct lpfc_hba *phba) } /** - * lpfc_cmpl_fabric_iocb: Completion callback function for fabric iocb. + * lpfc_cmpl_fabric_iocb - Completion callback function for fabric iocb * @phba: pointer to lpfc hba data structure. * @cmdiocb: pointer to lpfc command iocb data structure. * @rspiocb: pointer to lpfc response iocb data structure. @@ -6384,7 +6367,7 @@ lpfc_cmpl_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_issue_fabric_iocb: Issue a fabric iocb command. + * lpfc_issue_fabric_iocb - Issue a fabric iocb command * @phba: pointer to lpfc hba data structure. * @iocb: pointer to lpfc command iocb data structure. * @@ -6453,7 +6436,7 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb) } /** - * lpfc_fabric_abort_vport: Abort a vport's iocbs from driver fabric iocb list. + * lpfc_fabric_abort_vport - Abort a vport's iocbs from driver fabric iocb list * @vport: pointer to a virtual N_Port data structure. * * This routine aborts all the IOCBs associated with a @vport from the @@ -6468,7 +6451,6 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) LIST_HEAD(completions); struct lpfc_hba *phba = vport->phba; struct lpfc_iocbq *tmp_iocb, *piocb; - IOCB_t *cmd; spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list, @@ -6481,19 +6463,13 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&piocb->list); - - cmd = &piocb->iocb; - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } /** - * lpfc_fabric_abort_nport: Abort a ndlp's iocbs from driver fabric iocb list. + * lpfc_fabric_abort_nport - Abort a ndlp's iocbs from driver fabric iocb list * @ndlp: pointer to a node-list data structure. * * This routine aborts all the IOCBs associated with an @ndlp from the @@ -6506,10 +6482,9 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) { LIST_HEAD(completions); - struct lpfc_hba *phba = ndlp->vport->phba; + struct lpfc_hba *phba = ndlp->phba; struct lpfc_iocbq *tmp_iocb, *piocb; struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING]; - IOCB_t *cmd; spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list, @@ -6521,19 +6496,13 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&piocb->list); - - cmd = &piocb->iocb; - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } /** - * lpfc_fabric_abort_hba: Abort all iocbs on driver fabric iocb list. + * lpfc_fabric_abort_hba - Abort all iocbs on driver fabric iocb list * @phba: pointer to lpfc hba data structure. * * This routine aborts all the IOCBs currently on the driver internal @@ -6546,20 +6515,12 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp) void lpfc_fabric_abort_hba(struct lpfc_hba *phba) { LIST_HEAD(completions); - struct lpfc_iocbq *piocb; - IOCB_t *cmd; spin_lock_irq(&phba->hbalock); list_splice_init(&phba->fabric_iocb_list, &completions); spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - piocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&piocb->list); - - cmd = &piocb->iocb; - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (piocb->iocb_cmpl) (phba, piocb, piocb); - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 311ed6dea726..e764ce0bf704 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -78,7 +78,7 @@ lpfc_terminate_rport_io(struct fc_rport *rport) return; } - phba = ndlp->vport->phba; + phba = ndlp->phba; lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT, "rport terminate: sid:x%x did:x%x flg:x%x", @@ -276,7 +276,7 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) } /** - * lpfc_alloc_fast_evt: Allocates data structure for posting event. + * lpfc_alloc_fast_evt - Allocates data structure for posting event * @phba: Pointer to hba context object. * * This function is called from the functions which need to post @@ -303,7 +303,7 @@ lpfc_alloc_fast_evt(struct lpfc_hba *phba) { } /** - * lpfc_free_fast_evt: Frees event data structure. + * lpfc_free_fast_evt - Frees event data structure * @phba: Pointer to hba context object. * @evt: Event object which need to be freed. * @@ -319,7 +319,7 @@ lpfc_free_fast_evt(struct lpfc_hba *phba, } /** - * lpfc_send_fastpath_evt: Posts events generated from fast path. + * lpfc_send_fastpath_evt - Posts events generated from fast path * @phba: Pointer to hba context object. * @evtp: Event data structure. * @@ -1858,13 +1858,18 @@ lpfc_disable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) NLP_STE_UNUSED_NODE); } /** - * lpfc_initialize_node: Initialize all fields of node object. + * lpfc_initialize_node - Initialize all fields of node object * @vport: Pointer to Virtual Port object. * @ndlp: Pointer to FC node object. * @did: FC_ID of the node. - * This function is always called when node object need to - * be initialized. It initializes all the fields of the node - * object. + * + * This function is always called when node object need to be initialized. + * It initializes all the fields of the node object. Although the reference + * to phba from @ndlp can be obtained indirectly through it's reference to + * @vport, a direct reference to phba is taken here by @ndlp. This is due + * to the life-span of the @ndlp might go beyond the existence of @vport as + * the final release of ndlp is determined by its reference count. And, the + * operation on @ndlp needs the reference to phba. **/ static inline void lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, @@ -1877,6 +1882,7 @@ lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_delayfunc.data = (unsigned long)ndlp; ndlp->nlp_DID = did; ndlp->vport = vport; + ndlp->phba = vport->phba; ndlp->nlp_sid = NLP_NO_SID; kref_init(&ndlp->kref); NLP_INT_NODE_ACT(ndlp); @@ -2086,7 +2092,6 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) struct lpfc_sli *psli; struct lpfc_sli_ring *pring; struct lpfc_iocbq *iocb, *next_iocb; - IOCB_t *icmd; uint32_t rpi, i; lpfc_fabric_abort_nport(ndlp); @@ -2122,19 +2127,9 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) } } - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - icmd = &iocb->iocb; - icmd->ulpStatus = IOSTAT_LOCAL_REJECT; - icmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl)(phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); return 0; } @@ -2186,9 +2181,13 @@ lpfc_unreg_all_rpis(struct lpfc_vport *vport) mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); - if (rc == MBX_NOT_FINISHED) { + if (rc != MBX_TIMEOUT) mempool_free(mbox, phba->mbox_mem_pool); - } + + if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) + lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, + "1836 Could not issue " + "unreg_login(all_rpis) status %d\n", rc); } } @@ -2206,12 +2205,14 @@ lpfc_unreg_default_rpis(struct lpfc_vport *vport) mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); - if (rc == MBX_NOT_FINISHED) { + if (rc != MBX_TIMEOUT) + mempool_free(mbox, phba->mbox_mem_pool); + + if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, "1815 Could not issue " - "unreg_did (default rpis)\n"); - mempool_free(mbox, phba->mbox_mem_pool); - } + "unreg_did (default rpis) status %d\n", + rc); } } @@ -2470,14 +2471,13 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did) if (ndlp->nlp_flag & NLP_RCV_PLOGI) return NULL; - spin_lock_irq(shost->host_lock); - ndlp->nlp_flag |= NLP_NPR_2B_DISC; - spin_unlock_irq(shost->host_lock); - /* Since this node is marked for discovery, * delay timeout is not needed. */ lpfc_cancel_retry_delay_tmo(vport, ndlp); + spin_lock_irq(shost->host_lock); + ndlp->nlp_flag |= NLP_NPR_2B_DISC; + spin_unlock_irq(shost->host_lock); } else ndlp = NULL; } else { @@ -2740,19 +2740,9 @@ lpfc_free_tx(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - icmd = &iocb->iocb; - icmd->ulpStatus = IOSTAT_LOCAL_REJECT; - icmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } static void @@ -3173,7 +3163,7 @@ lpfc_nlp_release(struct kref *kref) lpfc_nlp_remove(ndlp->vport, ndlp); /* clear the ndlp active flag for all release cases */ - phba = ndlp->vport->phba; + phba = ndlp->phba; spin_lock_irqsave(&phba->ndlp_lock, flags); NLP_CLR_NODE_ACT(ndlp); spin_unlock_irqrestore(&phba->ndlp_lock, flags); @@ -3181,7 +3171,7 @@ lpfc_nlp_release(struct kref *kref) /* free ndlp memory for final ndlp release */ if (NLP_CHK_FREE_REQ(ndlp)) { kfree(ndlp->lat_data); - mempool_free(ndlp, ndlp->vport->phba->nlp_mem_pool); + mempool_free(ndlp, ndlp->phba->nlp_mem_pool); } } @@ -3204,7 +3194,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp) * ndlp reference count that is in the process of being * released. */ - phba = ndlp->vport->phba; + phba = ndlp->phba; spin_lock_irqsave(&phba->ndlp_lock, flags); if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) { spin_unlock_irqrestore(&phba->ndlp_lock, flags); @@ -3240,7 +3230,7 @@ lpfc_nlp_put(struct lpfc_nodelist *ndlp) "node put: did:x%x flg:x%x refcnt:x%x", ndlp->nlp_DID, ndlp->nlp_flag, atomic_read(&ndlp->kref.refcount)); - phba = ndlp->vport->phba; + phba = ndlp->phba; spin_lock_irqsave(&phba->ndlp_lock, flags); /* Check the ndlp memory free acknowledge flag to avoid the * possible race condition that kref_put got invoked again diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 06874e6009ea..86d1bdcbf2d8 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -60,7 +60,7 @@ static struct scsi_transport_template *lpfc_vport_transport_template = NULL; static DEFINE_IDR(lpfc_hba_index); /** - * lpfc_config_port_prep: Perform lpfc initialization prior to config port. + * lpfc_config_port_prep - Perform lpfc initialization prior to config port * @phba: pointer to lpfc hba data structure. * * This routine will do LPFC initialization prior to issuing the CONFIG_PORT @@ -221,7 +221,7 @@ out_free_mbox: } /** - * lpfc_config_async_cmpl: Completion handler for config async event mbox cmd. + * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * @@ -242,8 +242,7 @@ lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) } /** - * lpfc_dump_wakeup_param_cmpl: Completion handler for dump memory mailbox - * command used for getting wake up parameters. + * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * @@ -287,7 +286,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) } /** - * lpfc_config_port_post: Perform lpfc initialization after config port. + * lpfc_config_port_post - Perform lpfc initialization after config port * @phba: pointer to lpfc hba data structure. * * This routine will do LPFC initialization after the CONFIG_PORT mailbox @@ -303,6 +302,7 @@ int lpfc_config_port_post(struct lpfc_hba *phba) { struct lpfc_vport *vport = phba->pport; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); LPFC_MBOXQ_t *pmb; MAILBOX_t *mb; struct lpfc_dmabuf *mp; @@ -360,6 +360,11 @@ lpfc_config_port_post(struct lpfc_hba *phba) sizeof (struct lpfc_name)); memcpy(&vport->fc_portname, &vport->fc_sparam.portName, sizeof (struct lpfc_name)); + + /* Update the fc_host data structures with new wwn. */ + fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn); + fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn); + /* If no serial number in VPD data, use low 6 bytes of WWNN */ /* This should be consolidated into parse_vpd ? - mr */ if (phba->SerialNumber[0] == 0) { @@ -551,7 +556,7 @@ lpfc_config_port_post(struct lpfc_hba *phba) } /** - * lpfc_hba_down_prep: Perform lpfc uninitialization prior to HBA reset. + * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset * @phba: pointer to lpfc HBA data structure. * * This routine will do LPFC uninitialization before the HBA is reset when @@ -583,7 +588,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba) } /** - * lpfc_hba_down_post: Perform lpfc uninitialization after HBA reset. + * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset * @phba: pointer to lpfc HBA data structure. * * This routine will do uninitialization after the HBA is reset when bring @@ -599,8 +604,6 @@ lpfc_hba_down_post(struct lpfc_hba *phba) struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; struct lpfc_dmabuf *mp, *next_mp; - struct lpfc_iocbq *iocb; - IOCB_t *cmd = NULL; LIST_HEAD(completions); int i; @@ -628,20 +631,9 @@ lpfc_hba_down_post(struct lpfc_hba *phba) pring->txcmplq_cnt = 0; spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, - list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); lpfc_sli_abort_iocb_ring(phba, pring); spin_lock_irq(&phba->hbalock); @@ -652,7 +644,7 @@ lpfc_hba_down_post(struct lpfc_hba *phba) } /** - * lpfc_hb_timeout: The HBA-timer timeout handler. + * lpfc_hb_timeout - The HBA-timer timeout handler * @ptr: unsigned long holds the pointer to lpfc hba data structure. * * This is the HBA-timer timeout handler registered to the lpfc driver. When @@ -686,7 +678,7 @@ lpfc_hb_timeout(unsigned long ptr) } /** - * lpfc_hb_mbox_cmpl: The lpfc heart-beat mailbox command callback function. + * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function * @phba: pointer to lpfc hba data structure. * @pmboxq: pointer to the driver internal queue element for mailbox command. * @@ -721,7 +713,7 @@ lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) } /** - * lpfc_hb_timeout_handler: The HBA-timer timeout handler. + * lpfc_hb_timeout_handler - The HBA-timer timeout handler * @phba: pointer to lpfc hba data structure. * * This is the actual HBA-timer timeout handler to be invoked by the worker @@ -830,7 +822,7 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba) } /** - * lpfc_offline_eratt: Bring lpfc offline on hardware error attention. + * lpfc_offline_eratt - Bring lpfc offline on hardware error attention * @phba: pointer to lpfc hba data structure. * * This routine is called to bring the HBA offline when HBA hardware error @@ -857,7 +849,73 @@ lpfc_offline_eratt(struct lpfc_hba *phba) } /** - * lpfc_handle_eratt: The HBA hardware error handler. + * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to handle the deferred HBA hardware error + * conditions. This type of error is indicated by HBA by setting ER1 + * and another ER bit in the host status register. The driver will + * wait until the ER1 bit clears before handling the error condition. + **/ +static void +lpfc_handle_deferred_eratt(struct lpfc_hba *phba) +{ + uint32_t old_host_status = phba->work_hs; + struct lpfc_sli_ring *pring; + struct lpfc_sli *psli = &phba->sli; + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0479 Deferred Adapter Hardware Error " + "Data: x%x x%x x%x\n", + phba->work_hs, + phba->work_status[0], phba->work_status[1]); + + spin_lock_irq(&phba->hbalock); + psli->sli_flag &= ~LPFC_SLI2_ACTIVE; + spin_unlock_irq(&phba->hbalock); + + + /* + * Firmware stops when it triggred erratt. That could cause the I/Os + * dropped by the firmware. Error iocb (I/O) on txcmplq and let the + * SCSI layer retry it after re-establishing link. + */ + pring = &psli->ring[psli->fcp_ring]; + lpfc_sli_abort_iocb_ring(phba, pring); + + /* + * There was a firmware error. Take the hba offline and then + * attempt to restart it. + */ + lpfc_offline_prep(phba); + lpfc_offline(phba); + + /* Wait for the ER1 bit to clear.*/ + while (phba->work_hs & HS_FFER1) { + msleep(100); + phba->work_hs = readl(phba->HSregaddr); + /* If driver is unloading let the worker thread continue */ + if (phba->pport->load_flag & FC_UNLOADING) { + phba->work_hs = 0; + break; + } + } + + /* + * This is to ptrotect against a race condition in which + * first write to the host attention register clear the + * host status register. + */ + if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING))) + phba->work_hs = old_host_status & ~HS_FFER1; + + phba->hba_flag &= ~DEFER_ERATT; + phba->work_status[0] = readl(phba->MBslimaddr + 0xa8); + phba->work_status[1] = readl(phba->MBslimaddr + 0xac); +} + +/** + * lpfc_handle_eratt - The HBA hardware error handler * @phba: pointer to lpfc hba data structure. * * This routine is invoked to handle the following HBA hardware error @@ -895,6 +953,9 @@ lpfc_handle_eratt(struct lpfc_hba *phba) (char *) &board_event, LPFC_NL_VENDOR_ID); + if (phba->hba_flag & DEFER_ERATT) + lpfc_handle_deferred_eratt(phba); + if (phba->work_hs & HS_FFER6) { /* Re-establishing Link */ lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, @@ -976,7 +1037,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba) } /** - * lpfc_handle_latt: The HBA link event handler. + * lpfc_handle_latt - The HBA link event handler * @phba: pointer to lpfc hba data structure. * * This routine is invoked from the worker thread to handle a HBA host @@ -1063,7 +1124,7 @@ lpfc_handle_latt_err_exit: } /** - * lpfc_parse_vpd: Parse VPD (Vital Product Data). + * lpfc_parse_vpd - Parse VPD (Vital Product Data) * @phba: pointer to lpfc hba data structure. * @vpd: pointer to the vital product data. * @len: length of the vital product data in bytes. @@ -1213,7 +1274,7 @@ lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len) } /** - * lpfc_get_hba_model_desc: Retrieve HBA device model name and description. + * lpfc_get_hba_model_desc - Retrieve HBA device model name and description * @phba: pointer to lpfc hba data structure. * @mdp: pointer to the data structure to hold the derived model name. * @descp: pointer to the data structure to hold the derived description. @@ -1322,7 +1383,8 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) m = (typeof(m)){"LPe11000", max_speed, "PCIe"}; break; case PCI_DEVICE_ID_ZEPHYR_DCSP: - m = (typeof(m)){"LPe11002-SP", max_speed, "PCIe"}; + m = (typeof(m)){"LP2105", max_speed, "PCIe"}; + GE = 1; break; case PCI_DEVICE_ID_ZMID: m = (typeof(m)){"LPe1150", max_speed, "PCIe"}; @@ -1392,7 +1454,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) } /** - * lpfc_post_buffer: Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring. + * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring * @phba: pointer to lpfc hba data structure. * @pring: pointer to a IOCB ring. * @cnt: the number of IOCBs to be posted to the IOCB ring. @@ -1493,7 +1555,7 @@ lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt) } /** - * lpfc_post_rcv_buf: Post the initial receive IOCB buffers to ELS ring. + * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring * @phba: pointer to lpfc hba data structure. * * This routine posts initial receive IOCB buffers to the ELS ring. The @@ -1518,7 +1580,7 @@ lpfc_post_rcv_buf(struct lpfc_hba *phba) #define S(N,V) (((V)<<(N))|((V)>>(32-(N)))) /** - * lpfc_sha_init: Set up initial array of hash table entries. + * lpfc_sha_init - Set up initial array of hash table entries * @HashResultPointer: pointer to an array as hash table. * * This routine sets up the initial values to the array of hash table entries @@ -1535,7 +1597,7 @@ lpfc_sha_init(uint32_t * HashResultPointer) } /** - * lpfc_sha_iterate: Iterate initial hash table with the working hash table. + * lpfc_sha_iterate - Iterate initial hash table with the working hash table * @HashResultPointer: pointer to an initial/result hash table. * @HashWorkingPointer: pointer to an working hash table. * @@ -1592,7 +1654,7 @@ lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer) } /** - * lpfc_challenge_key: Create challenge key based on WWPN of the HBA. + * lpfc_challenge_key - Create challenge key based on WWPN of the HBA * @RandomChallenge: pointer to the entry of host challenge random number array. * @HashWorking: pointer to the entry of the working hash array. * @@ -1608,7 +1670,7 @@ lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking) } /** - * lpfc_hba_init: Perform special handling for LC HBA initialization. + * lpfc_hba_init - Perform special handling for LC HBA initialization * @phba: pointer to lpfc hba data structure. * @hbainit: pointer to an array of unsigned 32-bit integers. * @@ -1637,7 +1699,7 @@ lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit) } /** - * lpfc_cleanup: Performs vport cleanups before deleting a vport. + * lpfc_cleanup - Performs vport cleanups before deleting a vport * @vport: pointer to a virtual N_Port data structure. * * This routine performs the necessary cleanups before deleting the @vport. @@ -1724,7 +1786,7 @@ lpfc_cleanup(struct lpfc_vport *vport) } /** - * lpfc_stop_vport_timers: Stop all the timers associated with a vport. + * lpfc_stop_vport_timers - Stop all the timers associated with a vport * @vport: pointer to a virtual N_Port data structure. * * This routine stops all the timers associated with a @vport. This function @@ -1741,7 +1803,7 @@ lpfc_stop_vport_timers(struct lpfc_vport *vport) } /** - * lpfc_stop_phba_timers: Stop all the timers associated with an HBA. + * lpfc_stop_phba_timers - Stop all the timers associated with an HBA * @phba: pointer to lpfc hba data structure. * * This routine stops all the timers associated with a HBA. This function is @@ -1761,7 +1823,7 @@ lpfc_stop_phba_timers(struct lpfc_hba *phba) } /** - * lpfc_block_mgmt_io: Mark a HBA's management interface as blocked. + * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked * @phba: pointer to lpfc hba data structure. * * This routine marks a HBA's management interface as blocked. Once the HBA's @@ -1781,7 +1843,7 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba) } /** - * lpfc_online: Initialize and bring a HBA online. + * lpfc_online - Initialize and bring a HBA online * @phba: pointer to lpfc hba data structure. * * This routine initializes the HBA and brings a HBA online. During this @@ -1839,7 +1901,7 @@ lpfc_online(struct lpfc_hba *phba) } /** - * lpfc_unblock_mgmt_io: Mark a HBA's management interface to be not blocked. + * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked * @phba: pointer to lpfc hba data structure. * * This routine marks a HBA's management interface as not blocked. Once the @@ -1860,7 +1922,7 @@ lpfc_unblock_mgmt_io(struct lpfc_hba * phba) } /** - * lpfc_offline_prep: Prepare a HBA to be brought offline. + * lpfc_offline_prep - Prepare a HBA to be brought offline * @phba: pointer to lpfc hba data structure. * * This routine is invoked to prepare a HBA to be brought offline. It performs @@ -1917,7 +1979,7 @@ lpfc_offline_prep(struct lpfc_hba * phba) } /** - * lpfc_offline: Bring a HBA offline. + * lpfc_offline - Bring a HBA offline * @phba: pointer to lpfc hba data structure. * * This routine actually brings a HBA offline. It stops all the timers @@ -1962,7 +2024,7 @@ lpfc_offline(struct lpfc_hba *phba) } /** - * lpfc_scsi_free: Free all the SCSI buffers and IOCBs from driver lists. + * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists * @phba: pointer to lpfc hba data structure. * * This routine is to free all the SCSI buffers and IOCBs from the driver @@ -2001,7 +2063,7 @@ lpfc_scsi_free(struct lpfc_hba *phba) } /** - * lpfc_create_port: Create an FC port. + * lpfc_create_port - Create an FC port * @phba: pointer to lpfc hba data structure. * @instance: a unique integer ID to this FC port. * @dev: pointer to the device data structure. @@ -2091,7 +2153,7 @@ out: } /** - * destroy_port: Destroy an FC port. + * destroy_port - destroy an FC port * @vport: pointer to an lpfc virtual N_Port data structure. * * This routine destroys a FC port from the upper layer protocol. All the @@ -2116,7 +2178,7 @@ destroy_port(struct lpfc_vport *vport) } /** - * lpfc_get_instance: Get a unique integer ID. + * lpfc_get_instance - Get a unique integer ID * * This routine allocates a unique integer ID from lpfc_hba_index pool. It * uses the kernel idr facility to perform the task. @@ -2139,7 +2201,7 @@ lpfc_get_instance(void) } /** - * lpfc_scan_finished: method for SCSI layer to detect whether scan is done. + * lpfc_scan_finished - method for SCSI layer to detect whether scan is done * @shost: pointer to SCSI host data structure. * @time: elapsed time of the scan in jiffies. * @@ -2197,7 +2259,7 @@ finished: } /** - * lpfc_host_attrib_init: Initialize SCSI host attributes on a FC port. + * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port * @shost: pointer to SCSI host data structure. * * This routine initializes a given SCSI host attributes on a FC port. The @@ -2252,7 +2314,7 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost) } /** - * lpfc_enable_msix: Enable MSI-X interrupt mode. + * lpfc_enable_msix - Enable MSI-X interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to enable the MSI-X interrupt vectors. The kernel @@ -2366,7 +2428,7 @@ msi_fail_out: } /** - * lpfc_disable_msix: Disable MSI-X interrupt mode. + * lpfc_disable_msix - Disable MSI-X interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to release the MSI-X vectors and then disable the @@ -2385,7 +2447,7 @@ lpfc_disable_msix(struct lpfc_hba *phba) } /** - * lpfc_enable_msi: Enable MSI interrupt mode. + * lpfc_enable_msi - Enable MSI interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to enable the MSI interrupt mode. The kernel @@ -2423,7 +2485,7 @@ lpfc_enable_msi(struct lpfc_hba *phba) } /** - * lpfc_disable_msi: Disable MSI interrupt mode. + * lpfc_disable_msi - Disable MSI interrupt mode * @phba: pointer to lpfc hba data structure. * * This routine is invoked to disable the MSI interrupt mode. The driver @@ -2441,7 +2503,7 @@ lpfc_disable_msi(struct lpfc_hba *phba) } /** - * lpfc_log_intr_mode: Log the active interrupt mode + * lpfc_log_intr_mode - Log the active interrupt mode * @phba: pointer to lpfc hba data structure. * @intr_mode: active interrupt mode adopted. * @@ -2490,7 +2552,7 @@ lpfc_stop_port(struct lpfc_hba *phba) } /** - * lpfc_enable_intr: Enable device interrupt. + * lpfc_enable_intr - Enable device interrupt * @phba: pointer to lpfc hba data structure. * * This routine is invoked to enable device interrupt and associate driver's @@ -2547,7 +2609,7 @@ lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode) } /** - * lpfc_disable_intr: Disable device interrupt. + * lpfc_disable_intr - Disable device interrupt * @phba: pointer to lpfc hba data structure. * * This routine is invoked to disable device interrupt and disassociate the @@ -2574,7 +2636,7 @@ lpfc_disable_intr(struct lpfc_hba *phba) } /** - * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem. + * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem * @pdev: pointer to PCI device * @pid: pointer to PCI device identifier * @@ -3010,7 +3072,7 @@ out: } /** - * lpfc_pci_remove_one: lpfc PCI func to unregister device from PCI subsystem. + * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem * @pdev: pointer to PCI device * * This routine is to be registered to the kernel's PCI subsystem. When an @@ -3033,8 +3095,6 @@ lpfc_pci_remove_one(struct pci_dev *pdev) lpfc_free_sysfs_attr(vport); - kthread_stop(phba->worker_thread); - /* Release all the vports against this physical port */ vports = lpfc_create_vport_work_array(phba); if (vports != NULL) @@ -3052,7 +3112,12 @@ lpfc_pci_remove_one(struct pci_dev *pdev) * clears the rings, discards all mailbox commands, and resets * the HBA. */ + + /* HBA interrupt will be diabled after this call */ lpfc_sli_hba_down(phba); + /* Stop kthread signal shall trigger work_done one more time */ + kthread_stop(phba->worker_thread); + /* Final cleanup of txcmplq and reset the HBA */ lpfc_sli_brdrestart(phba); lpfc_stop_phba_timers(phba); @@ -3095,7 +3160,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev) } /** - * lpfc_pci_suspend_one: lpfc PCI func to suspend device for power management. + * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management * @pdev: pointer to PCI device * @msg: power management message * @@ -3139,7 +3204,7 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg) } /** - * lpfc_pci_resume_one: lpfc PCI func to resume device for power management. + * lpfc_pci_resume_one - lpfc PCI func to resume device for power management * @pdev: pointer to PCI device * * This routine is to be registered to the kernel's PCI subsystem to support @@ -3204,7 +3269,7 @@ lpfc_pci_resume_one(struct pci_dev *pdev) } /** - * lpfc_io_error_detected: Driver method for handling PCI I/O error detected. + * lpfc_io_error_detected - Driver method for handling PCI I/O error detected * @pdev: pointer to PCI device. * @state: the current PCI connection state. * @@ -3254,7 +3319,7 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev, } /** - * lpfc_io_slot_reset: Restart a PCI device from scratch. + * lpfc_io_slot_reset - Restart a PCI device from scratch * @pdev: pointer to PCI device. * * This routine is registered to the PCI subsystem for error handling. This is @@ -3313,7 +3378,7 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) } /** - * lpfc_io_resume: Resume PCI I/O operation. + * lpfc_io_resume - Resume PCI I/O operation * @pdev: pointer to PCI device * * This routine is registered to the PCI subsystem for error handling. It is @@ -3426,7 +3491,7 @@ static struct pci_driver lpfc_driver = { }; /** - * lpfc_init: lpfc module initialization routine. + * lpfc_init - lpfc module initialization routine * * This routine is to be invoked when the lpfc module is loaded into the * kernel. The special kernel macro module_init() is used to indicate the @@ -3472,7 +3537,7 @@ lpfc_init(void) } /** - * lpfc_exit: lpfc module removal routine. + * lpfc_exit - lpfc module removal routine * * This routine is invoked when the lpfc module is removed from the kernel. * The special kernel macro module_exit() is used to indicate the role of diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h index a85b7c196bbc..1aa85709b012 100644 --- a/drivers/scsi/lpfc/lpfc_logmsg.h +++ b/drivers/scsi/lpfc/lpfc_logmsg.h @@ -27,7 +27,7 @@ #define LOG_FCP 0x40 /* FCP traffic history */ #define LOG_NODE 0x80 /* Node table events */ #define LOG_TEMP 0x100 /* Temperature sensor events */ -#define LOG_BG 0x200 /* BlockBuard events */ +#define LOG_BG 0x200 /* BlockGuard events */ #define LOG_MISC 0x400 /* Miscellaneous events */ #define LOG_SLI 0x800 /* SLI events */ #define LOG_FCP_ERROR 0x1000 /* log errors, not underruns */ diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 34eeb086a667..134fc7fc2127 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -39,7 +39,7 @@ #include "lpfc_compat.h" /** - * lpfc_dump_mem: Prepare a mailbox command for retrieving HBA's VPD memory. + * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @offset: offset for dumping VPD memory mailbox command. @@ -77,9 +77,10 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset) } /** - * lpfc_dump_mem: Prepare a mailbox command for retrieving wakeup params. + * lpfc_dump_wakeup_param - Prepare mailbox command for retrieving wakeup params * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. + * * This function create a dump memory mailbox command to dump wake up * parameters. */ @@ -109,7 +110,7 @@ lpfc_dump_wakeup_param(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param. + * lpfc_read_nv - Prepare a mailbox command for reading HBA's NVRAM param * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -132,7 +133,7 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_config_async: Prepare a mailbox command for enabling HBA async event. + * lpfc_config_async - Prepare a mailbox command for enabling HBA async event * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @ring: ring number for the asynchronous event to be configured. @@ -159,7 +160,7 @@ lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, } /** - * lpfc_heart_beat: Prepare a mailbox command for heart beat. + * lpfc_heart_beat - Prepare a mailbox command for heart beat * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -184,7 +185,7 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_read_la: Prepare a mailbox command for reading HBA link attention. + * lpfc_read_la - Prepare a mailbox command for reading HBA link attention * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @mp: DMA buffer memory for reading the link attention information into. @@ -228,7 +229,7 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp) } /** - * lpfc_clear_la: Prepare a mailbox command for clearing HBA link attention. + * lpfc_clear_la - Prepare a mailbox command for clearing HBA link attention * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -257,7 +258,7 @@ lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_config_link: Prepare a mailbox command for configuring link on a HBA. + * lpfc_config_link - Prepare a mailbox command for configuring link on a HBA * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -305,7 +306,7 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_config_msi: Prepare a mailbox command for configuring msi-x. + * lpfc_config_msi - Prepare a mailbox command for configuring msi-x * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -383,7 +384,7 @@ lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_init_link: Prepare a mailbox command for initialize link on a HBA. + * lpfc_init_link - Prepare a mailbox command for initialize link on a HBA * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @topology: the link topology for the link to be initialized to. @@ -463,7 +464,7 @@ lpfc_init_link(struct lpfc_hba * phba, } /** - * lpfc_read_sparam: Prepare a mailbox command for reading HBA parameters. + * lpfc_read_sparam - Prepare a mailbox command for reading HBA parameters * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @vpi: virtual N_Port identifier. @@ -523,7 +524,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) } /** - * lpfc_unreg_did: Prepare a mailbox command for unregistering DID. + * lpfc_unreg_did - Prepare a mailbox command for unregistering DID * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @did: remote port identifier. @@ -555,7 +556,7 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did, } /** - * lpfc_read_config: Prepare a mailbox command for reading HBA configuration. + * lpfc_read_config - Prepare a mailbox command for reading HBA configuration * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -581,7 +582,7 @@ lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_read_lnk_stat: Prepare a mailbox command for reading HBA link stats. + * lpfc_read_lnk_stat - Prepare a mailbox command for reading HBA link stats * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -606,7 +607,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_reg_login: Prepare a mailbox command for registering remote login. + * lpfc_reg_login - Prepare a mailbox command for registering remote login * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @did: remote port identifier. @@ -677,7 +678,7 @@ lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, } /** - * lpfc_unreg_login: Prepare a mailbox command for unregistering remote login. + * lpfc_unreg_login - Prepare a mailbox command for unregistering remote login * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @rpi: remote port identifier @@ -709,7 +710,7 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, } /** - * lpfc_reg_vpi: Prepare a mailbox command for registering vport identifier. + * lpfc_reg_vpi - Prepare a mailbox command for registering vport identifier * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @sid: Fibre Channel S_ID (N_Port_ID assigned to a virtual N_Port). @@ -741,7 +742,7 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid, } /** - * lpfc_unreg_vpi: Prepare a mailbox command for unregistering vport id. + * lpfc_unreg_vpi - Prepare a mailbox command for unregistering vport id * @phba: pointer to lpfc hba data structure. * @vpi: virtual N_Port identifier. * @pmb: pointer to the driver internal queue element for mailbox command. @@ -771,7 +772,7 @@ lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb) } /** - * lpfc_config_pcb_setup: Set up IOCB rings in the Port Control Block (PCB) + * lpfc_config_pcb_setup - Set up IOCB rings in the Port Control Block (PCB) * @phba: pointer to lpfc hba data structure. * * This routine sets up and initializes the IOCB rings in the Port Control @@ -835,7 +836,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba) } /** - * lpfc_read_rev: Prepare a mailbox command for reading HBA revision. + * lpfc_read_rev - Prepare a mailbox command for reading HBA revision * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -861,7 +862,7 @@ lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_build_hbq_profile2: Set up the HBQ Selection Profile 2. + * lpfc_build_hbq_profile2 - Set up the HBQ Selection Profile 2 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. * @hbq_desc: pointer to the HBQ selection profile descriptor. * @@ -880,7 +881,7 @@ lpfc_build_hbq_profile2(struct config_hbq_var *hbqmb, } /** - * lpfc_build_hbq_profile3: Set up the HBQ Selection Profile 3. + * lpfc_build_hbq_profile3 - Set up the HBQ Selection Profile 3 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. * @hbq_desc: pointer to the HBQ selection profile descriptor. * @@ -902,7 +903,7 @@ lpfc_build_hbq_profile3(struct config_hbq_var *hbqmb, } /** - * lpfc_build_hbq_profile5: Set up the HBQ Selection Profile 5. + * lpfc_build_hbq_profile5 - Set up the HBQ Selection Profile 5 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command. * @hbq_desc: pointer to the HBQ selection profile descriptor. * @@ -925,7 +926,7 @@ lpfc_build_hbq_profile5(struct config_hbq_var *hbqmb, } /** - * lpfc_config_hbq: Prepare a mailbox command for configuring an HBQ. + * lpfc_config_hbq - Prepare a mailbox command for configuring an HBQ * @phba: pointer to lpfc hba data structure. * @id: HBQ identifier. * @hbq_desc: pointer to the HBA descriptor data structure. @@ -999,7 +1000,7 @@ lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id, } /** - * lpfc_config_ring: Prepare a mailbox command for configuring an IOCB ring. + * lpfc_config_ring - Prepare a mailbox command for configuring an IOCB ring * @phba: pointer to lpfc hba data structure. * @ring: * @pmb: pointer to the driver internal queue element for mailbox command. @@ -1057,7 +1058,7 @@ lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb) } /** - * lpfc_config_port: Prepare a mailbox command for configuring port. + * lpfc_config_port - Prepare a mailbox command for configuring port * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -1227,7 +1228,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_kill_board: Prepare a mailbox command for killing board. + * lpfc_kill_board - Prepare a mailbox command for killing board * @phba: pointer to lpfc hba data structure. * @pmb: pointer to the driver internal queue element for mailbox command. * @@ -1253,7 +1254,7 @@ lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) } /** - * lpfc_mbox_put: Put a mailbox cmd into the tail of driver's mailbox queue. + * lpfc_mbox_put - Put a mailbox cmd into the tail of driver's mailbox queue * @phba: pointer to lpfc hba data structure. * @mbq: pointer to the driver internal queue element for mailbox command. * @@ -1277,7 +1278,7 @@ lpfc_mbox_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) } /** - * lpfc_mbox_get: Remove a mailbox cmd from the head of driver's mailbox queue. + * lpfc_mbox_get - Remove a mailbox cmd from the head of driver's mailbox queue * @phba: pointer to lpfc hba data structure. * * Driver maintains a internal mailbox command queue implemented as a linked @@ -1304,7 +1305,7 @@ lpfc_mbox_get(struct lpfc_hba * phba) } /** - * lpfc_mbox_cmpl_put: Put mailbox command into mailbox command complete list. + * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list * @phba: pointer to lpfc hba data structure. * @mbq: pointer to the driver internal queue element for mailbox command. * @@ -1327,7 +1328,7 @@ lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) } /** - * lpfc_mbox_tmo_val: Retrieve mailbox command timeout value. + * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value * @phba: pointer to lpfc hba data structure. * @cmd: mailbox command code. * diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index a4bba2069248..35a976733398 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -41,7 +41,7 @@ /** - * lpfc_mem_alloc: create and allocate all PCI and memory pools + * lpfc_mem_alloc - create and allocate all PCI and memory pools * @phba: HBA to allocate pools for * * Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool, @@ -136,12 +136,12 @@ lpfc_mem_alloc(struct lpfc_hba * phba) } /** - * lpfc_mem_free: Frees all PCI and memory allocated by lpfc_mem_alloc + * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc * @phba: HBA to free memory for * * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool, * lpfc_hbq_pool. Frees kmalloc-backed mempools for LPFC_MBOXQ_t and - * lpfc_nodelist. Also frees the VPI bitmask. + * lpfc_nodelist. Also frees the VPI bitmask * * Returns: None **/ @@ -212,7 +212,7 @@ lpfc_mem_free(struct lpfc_hba * phba) } /** - * lpfc_mbuf_alloc: Allocate an mbuf from the lpfc_mbuf_pool PCI pool + * lpfc_mbuf_alloc - Allocate an mbuf from the lpfc_mbuf_pool PCI pool * @phba: HBA which owns the pool to allocate from * @mem_flags: indicates if this is a priority (MEM_PRI) allocation * @handle: used to return the DMA-mapped address of the mbuf @@ -249,7 +249,7 @@ lpfc_mbuf_alloc(struct lpfc_hba *phba, int mem_flags, dma_addr_t *handle) } /** - * __lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (locked) + * __lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (locked) * @phba: HBA which owns the pool to return to * @virt: mbuf to free * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed @@ -278,7 +278,7 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) } /** - * lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked) + * lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked) * @phba: HBA which owns the pool to return to * @virt: mbuf to free * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed @@ -291,7 +291,6 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) * Returns: None **/ void - lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) { unsigned long iflags; @@ -303,7 +302,7 @@ lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma) } /** - * lpfc_els_hbq_alloc: Allocate an HBQ buffer + * lpfc_els_hbq_alloc - Allocate an HBQ buffer * @phba: HBA to allocate HBQ buffer for * * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI @@ -335,7 +334,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba) } /** - * lpfc_mem_hbq_free: Frees an HBQ buffer allocated with lpfc_els_hbq_alloc + * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc * @phba: HBA buffer was allocated for * @hbqbp: HBQ container returned by lpfc_els_hbq_alloc * @@ -355,7 +354,7 @@ lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp) } /** - * lpfc_in_buf_free: Free a DMA buffer + * lpfc_in_buf_free - Free a DMA buffer * @phba: HBA buffer is associated with * @mp: Buffer to free * diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 8f548adae9cc..08cdc77af41c 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -192,7 +192,6 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING]; struct lpfc_iocbq *iocb, *next_iocb; - IOCB_t *cmd; /* Abort outstanding I/O on NPort <nlp_DID> */ lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_DISCOVERY, @@ -223,19 +222,10 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) } spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); + lpfc_cancel_retry_delay_tmo(phba->pport, ndlp); return 0; } diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 36fd2e75da1c..167b66dd34c7 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -112,7 +112,7 @@ lpfc_debug_save_dif(struct scsi_cmnd *cmnd) } /** - * lpfc_update_stats: Update statistical data for the command completion. + * lpfc_update_stats - Update statistical data for the command completion * @phba: Pointer to HBA object. * @lpfc_cmd: lpfc scsi command object pointer. * @@ -165,8 +165,7 @@ lpfc_update_stats(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) } /** - * lpfc_send_sdev_queuedepth_change_event: Posts a queuedepth change - * event. + * lpfc_send_sdev_queuedepth_change_event - Posts a queuedepth change event * @phba: Pointer to HBA context object. * @vport: Pointer to vport object. * @ndlp: Pointer to FC node associated with the target. @@ -220,7 +219,7 @@ lpfc_send_sdev_queuedepth_change_event(struct lpfc_hba *phba, } /** - * lpfc_rampdown_queue_depth: Post RAMP_DOWN_QUEUE event to worker thread. + * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread * @phba: The Hba for which this call is being executed. * * This routine is called when there is resource error in driver or firmware. @@ -261,7 +260,7 @@ lpfc_rampdown_queue_depth(struct lpfc_hba *phba) } /** - * lpfc_rampup_queue_depth: Post RAMP_UP_QUEUE event for worker thread. + * lpfc_rampup_queue_depth - Post RAMP_UP_QUEUE event for worker thread * @phba: The Hba for which this call is being executed. * * This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine @@ -273,14 +272,14 @@ lpfc_rampdown_queue_depth(struct lpfc_hba *phba) **/ static inline void lpfc_rampup_queue_depth(struct lpfc_vport *vport, - struct scsi_device *sdev) + uint32_t queue_depth) { unsigned long flags; struct lpfc_hba *phba = vport->phba; uint32_t evt_posted; atomic_inc(&phba->num_cmd_success); - if (vport->cfg_lun_queue_depth <= sdev->queue_depth) + if (vport->cfg_lun_queue_depth <= queue_depth) return; spin_lock_irqsave(&phba->hbalock, flags); if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) || @@ -303,7 +302,7 @@ lpfc_rampup_queue_depth(struct lpfc_vport *vport, } /** - * lpfc_ramp_down_queue_handler: WORKER_RAMP_DOWN_QUEUE event handler. + * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler * @phba: The Hba for which this call is being executed. * * This routine is called to process WORKER_RAMP_DOWN_QUEUE event for worker @@ -361,7 +360,7 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) } /** - * lpfc_ramp_up_queue_handler: WORKER_RAMP_UP_QUEUE event handler. + * lpfc_ramp_up_queue_handler - WORKER_RAMP_UP_QUEUE event handler * @phba: The Hba for which this call is being executed. * * This routine is called to process WORKER_RAMP_UP_QUEUE event for worker @@ -410,7 +409,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) } /** - * lpfc_scsi_dev_block: set all scsi hosts to block state. + * lpfc_scsi_dev_block - set all scsi hosts to block state * @phba: Pointer to HBA context object. * * This function walks vport list and set each SCSI host to block state @@ -439,7 +438,7 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba) } /** - * lpfc_new_scsi_buf: Scsi buffer allocator. + * lpfc_new_scsi_buf - Scsi buffer allocator * @vport: The virtual port for which this call being executed. * * This routine allocates a scsi buffer, which contains all the necessary @@ -563,7 +562,7 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport) } /** - * lpfc_get_scsi_buf: Get a scsi buffer from lpfc_scsi_buf_list list of Hba. + * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba * @phba: The Hba for which this call is being executed. * * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list @@ -592,7 +591,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba) } /** - * lpfc_release_scsi_buf: Return a scsi buffer back to hba lpfc_scsi_buf_list list. + * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list * @phba: The Hba for which this call is being executed. * @psb: The scsi buffer which is being released. * @@ -611,7 +610,7 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) } /** - * lpfc_scsi_prep_dma_buf: Routine to do DMA mapping for scsi buffer. + * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer * @phba: The Hba for which this call is being executed. * @lpfc_cmd: The scsi buffer which is going to be mapped. * @@ -738,7 +737,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) * Due to difference in data length between DIF/non-DIF paths, * we need to set word 4 of IOCB here */ - iocb_cmd->un.fcpi.fcpi_parm = le32_to_cpu(scsi_bufflen(scsi_cmnd)); + iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd); return 0; } @@ -823,9 +822,9 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc) /** * lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command * @sc: in: SCSI command - * @apptagmask out: app tag mask - * @apptagval out: app tag value - * @reftag out: ref tag (reference tag) + * @apptagmask: out: app tag mask + * @apptagval: out: app tag value + * @reftag: out: ref tag (reference tag) * * Description: * Extract DIF paramters from the command if possible. Otherwise, @@ -1413,7 +1412,7 @@ out: } /** - * lpfc_send_scsi_error_event: Posts an event when there is SCSI error. + * lpfc_send_scsi_error_event - Posts an event when there is SCSI error * @phba: Pointer to hba context object. * @vport: Pointer to vport object. * @lpfc_cmd: Pointer to lpfc scsi command which reported the error. @@ -1505,7 +1504,7 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport, } /** - * lpfc_scsi_unprep_dma_buf: Routine to un-map DMA mapping of scatter gather. + * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather * @phba: The Hba for which this call is being executed. * @psb: The scsi buffer which is going to be un-mapped. * @@ -1530,7 +1529,7 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb) } /** - * lpfc_handler_fcp_err: FCP response handler. + * lpfc_handler_fcp_err - FCP response handler * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. * @rsp_iocb: The response IOCB which contains FCP error. @@ -1674,7 +1673,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, } /** - * lpfc_scsi_cmd_iocb_cmpl: Scsi cmnd IOCB completion routine. + * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine * @phba: The Hba for which this call is being executed. * @pIocbIn: The command IOCBQ for the scsi cmnd. * @pIocbOut: The response IOCBQ for the scsi cmnd . @@ -1694,10 +1693,12 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, struct lpfc_nodelist *pnode = rdata->pnode; struct scsi_cmnd *cmd = lpfc_cmd->pCmd; int result; - struct scsi_device *sdev, *tmp_sdev; + struct scsi_device *tmp_sdev; int depth = 0; unsigned long flags; struct lpfc_fast_path_event *fast_path_evt; + struct Scsi_Host *shost = cmd->device->host; + uint32_t queue_depth, scsi_id; lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4]; lpfc_cmd->status = pIocbOut->iocb.ulpStatus; @@ -1808,11 +1809,10 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, lpfc_update_stats(phba, lpfc_cmd); result = cmd->result; - sdev = cmd->device; if (vport->cfg_max_scsicmpl_time && time_after(jiffies, lpfc_cmd->start_time + msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) { - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); if (pnode && NLP_CHK_NODE_ACT(pnode)) { if (pnode->cmd_qdepth > atomic_read(&pnode->cmd_pending) && @@ -1825,22 +1825,26 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, pnode->last_change_time = jiffies; } - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); } else if (pnode && NLP_CHK_NODE_ACT(pnode)) { if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) && time_after(jiffies, pnode->last_change_time + msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) { - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); pnode->cmd_qdepth += pnode->cmd_qdepth * LPFC_TGTQ_RAMPUP_PCENT / 100; if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH) pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH; pnode->last_change_time = jiffies; - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); } } lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd); + + /* The sdev is not guaranteed to be valid post scsi_done upcall. */ + queue_depth = cmd->device->queue_depth; + scsi_id = cmd->device->id; cmd->scsi_done(cmd); if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { @@ -1848,28 +1852,28 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, * If there is a thread waiting for command completion * wake up the thread. */ - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); lpfc_cmd->pCmd = NULL; if (lpfc_cmd->waitq) wake_up(lpfc_cmd->waitq); - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); lpfc_release_scsi_buf(phba, lpfc_cmd); return; } if (!result) - lpfc_rampup_queue_depth(vport, sdev); + lpfc_rampup_queue_depth(vport, queue_depth); if (!result && pnode && NLP_CHK_NODE_ACT(pnode) && ((jiffies - pnode->last_ramp_up_time) > LPFC_Q_RAMP_UP_INTERVAL * HZ) && ((jiffies - pnode->last_q_full_time) > LPFC_Q_RAMP_UP_INTERVAL * HZ) && - (vport->cfg_lun_queue_depth > sdev->queue_depth)) { - shost_for_each_device(tmp_sdev, sdev->host) { + (vport->cfg_lun_queue_depth > queue_depth)) { + shost_for_each_device(tmp_sdev, shost) { if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){ - if (tmp_sdev->id != sdev->id) + if (tmp_sdev->id != scsi_id) continue; if (tmp_sdev->ordered_tags) scsi_adjust_queue_depth(tmp_sdev, @@ -1885,7 +1889,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, } lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode, 0xFFFFFFFF, - sdev->queue_depth - 1, sdev->queue_depth); + queue_depth , queue_depth + 1); } /* @@ -1896,8 +1900,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, NLP_CHK_NODE_ACT(pnode)) { pnode->last_q_full_time = jiffies; - shost_for_each_device(tmp_sdev, sdev->host) { - if (tmp_sdev->id != sdev->id) + shost_for_each_device(tmp_sdev, shost) { + if (tmp_sdev->id != scsi_id) continue; depth = scsi_track_queue_full(tmp_sdev, tmp_sdev->queue_depth - 1); @@ -1909,7 +1913,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, * scsi_track_queue_full. */ if (depth == -1) - depth = sdev->host->cmd_per_lun; + depth = shost->cmd_per_lun; if (depth) { lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP, @@ -1925,17 +1929,17 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, * If there is a thread waiting for command completion * wake up the thread. */ - spin_lock_irqsave(sdev->host->host_lock, flags); + spin_lock_irqsave(shost->host_lock, flags); lpfc_cmd->pCmd = NULL; if (lpfc_cmd->waitq) wake_up(lpfc_cmd->waitq); - spin_unlock_irqrestore(sdev->host->host_lock, flags); + spin_unlock_irqrestore(shost->host_lock, flags); lpfc_release_scsi_buf(phba, lpfc_cmd); } /** - * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB. + * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB * @data: A pointer to the immediate command data portion of the IOCB. * @fcp_cmnd: The FCP Command that is provided by the SCSI layer. * @@ -1953,7 +1957,7 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd) } /** - * lpfc_scsi_prep_cmnd: Routine to convert scsi cmnd to FCP information unit. + * lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: The scsi command which needs to send. * @pnode: Pointer to lpfc_nodelist. @@ -2047,7 +2051,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, } /** - * lpfc_scsi_prep_task_mgmt_cmnd: Convert scsi TM cmnd to FCP information unit. + * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. * @lun: Logical unit number. @@ -2110,7 +2114,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, } /** - * lpc_taskmgmt_def_cmpl: IOCB completion routine for task management command. + * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command * @phba: The Hba for which this call is being executed. * @cmdiocbq: Pointer to lpfc_iocbq data structure. * @rspiocbq: Pointer to lpfc_iocbq data structure. @@ -2131,7 +2135,7 @@ lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba, } /** - * lpfc_scsi_tgt_reset: Target reset handler. + * lpfc_scsi_tgt_reset - Target reset handler * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure * @vport: The virtual port for which this call is being executed. * @tgt_id: Target ID. @@ -2198,7 +2202,7 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport, } /** - * lpfc_info: Info entry point of scsi_host_template data structure. + * lpfc_info - Info entry point of scsi_host_template data structure * @host: The scsi host for which this call is being executed. * * This routine provides module information about hba. @@ -2236,7 +2240,7 @@ lpfc_info(struct Scsi_Host *host) } /** - * lpfc_poll_rearm_time: Routine to modify fcp_poll timer of hba. + * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba * @phba: The Hba for which this call is being executed. * * This routine modifies fcp_poll_timer field of @phba by cfg_poll_tmo. @@ -2253,7 +2257,7 @@ static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba) } /** - * lpfc_poll_start_timer: Routine to start fcp_poll_timer of HBA. + * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA * @phba: The Hba for which this call is being executed. * * This routine starts the fcp_poll_timer of @phba. @@ -2264,7 +2268,7 @@ void lpfc_poll_start_timer(struct lpfc_hba * phba) } /** - * lpfc_poll_timeout: Restart polling timer. + * lpfc_poll_timeout - Restart polling timer * @ptr: Map to lpfc_hba data structure pointer. * * This routine restarts fcp_poll timer, when FCP ring polling is enable @@ -2283,8 +2287,7 @@ void lpfc_poll_timeout(unsigned long ptr) } /** - * lpfc_queuecommand: Queuecommand entry point of Scsi Host Templater data - * structure. + * lpfc_queuecommand - scsi_host_template queuecommand entry point * @cmnd: Pointer to scsi_cmnd data structure. * @done: Pointer to done routine. * @@ -2450,7 +2453,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) } /** - * lpfc_block_error_handler: Routine to block error handler. + * lpfc_block_error_handler - Routine to block error handler * @cmnd: Pointer to scsi_cmnd data structure. * * This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD. @@ -2472,8 +2475,7 @@ lpfc_block_error_handler(struct scsi_cmnd *cmnd) } /** - * lpfc_abort_handler: Eh_abort_handler entry point of Scsi Host Template data - *structure. + * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point * @cmnd: Pointer to scsi_cmnd data structure. * * This routine aborts @cmnd pending in base driver. @@ -2578,8 +2580,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) } /** - * lpfc_device_reset_handler: eh_device_reset entry point of Scsi Host Template - *data structure. + * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point * @cmnd: Pointer to scsi_cmnd data structure. * * This routine does a device reset by sending a TARGET_RESET task management @@ -2587,7 +2588,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) * * Return code : * 0x2003 - Error - * 0ex2002 - Success + * 0x2002 - Success **/ static int lpfc_device_reset_handler(struct scsi_cmnd *cmnd) @@ -2707,8 +2708,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd) } /** - * lpfc_bus_reset_handler: eh_bus_reset_handler entry point of Scsi Host - * Template data structure. + * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point * @cmnd: Pointer to scsi_cmnd data structure. * * This routine does target reset to all target on @cmnd->device->host. @@ -2808,8 +2808,7 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd) } /** - * lpfc_slave_alloc: slave_alloc entry point of Scsi Host Template data - * structure. + * lpfc_slave_alloc - scsi_host_template slave_alloc entry point * @sdev: Pointer to scsi_device. * * This routine populates the cmds_per_lun count + 2 scsi_bufs into this host's @@ -2883,8 +2882,7 @@ lpfc_slave_alloc(struct scsi_device *sdev) } /** - * lpfc_slave_configure: slave_configure entry point of Scsi Host Templater data - * structure. + * lpfc_slave_configure - scsi_host_template slave_configure entry point * @sdev: Pointer to scsi_device. * * This routine configures following items @@ -2925,7 +2923,7 @@ lpfc_slave_configure(struct scsi_device *sdev) } /** - * lpfc_slave_destroy: slave_destroy entry point of SHT data structure. + * lpfc_slave_destroy - slave_destroy entry point of SHT data structure * @sdev: Pointer to scsi_device. * * This routine sets @sdev hostatdata filed to null. diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index a36a120561e2..eb5c75c45ba4 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -68,7 +68,7 @@ typedef enum _lpfc_iocb_type { } lpfc_iocb_type; /** - * lpfc_cmd_iocb: Get next command iocb entry in the ring. + * lpfc_cmd_iocb - Get next command iocb entry in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -85,7 +85,7 @@ lpfc_cmd_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_resp_iocb: Get next response iocb entry in the ring. + * lpfc_resp_iocb - Get next response iocb entry in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -102,7 +102,7 @@ lpfc_resp_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * __lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool. + * __lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool * @phba: Pointer to HBA context object. * * This function is called with hbalock held. This function @@ -121,7 +121,7 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba) } /** - * lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool. + * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool * @phba: Pointer to HBA context object. * * This function is called with no lock held. This function @@ -142,7 +142,7 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba) } /** - * __lpfc_sli_release_iocbq: Release iocb to the iocb pool. + * __lpfc_sli_release_iocbq - Release iocb to the iocb pool * @phba: Pointer to HBA context object. * @iocbq: Pointer to driver iocb object. * @@ -164,7 +164,7 @@ __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) } /** - * lpfc_sli_release_iocbq: Release iocb to the iocb pool. + * lpfc_sli_release_iocbq - Release iocb to the iocb pool * @phba: Pointer to HBA context object. * @iocbq: Pointer to driver iocb object. * @@ -185,8 +185,40 @@ lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) } /** - * lpfc_sli_iocb_cmd_type: Get the iocb type. - * @iocb_cmnd : iocb command code. + * lpfc_sli_cancel_iocbs - Cancel all iocbs from a list. + * @phba: Pointer to HBA context object. + * @iocblist: List of IOCBs. + * @ulpstatus: ULP status in IOCB command field. + * @ulpWord4: ULP word-4 in IOCB command field. + * + * This function is called with a list of IOCBs to cancel. It cancels the IOCB + * on the list by invoking the complete callback function associated with the + * IOCB with the provided @ulpstatus and @ulpword4 set to the IOCB commond + * fields. + **/ +void +lpfc_sli_cancel_iocbs(struct lpfc_hba *phba, struct list_head *iocblist, + uint32_t ulpstatus, uint32_t ulpWord4) +{ + struct lpfc_iocbq *piocb; + + while (!list_empty(iocblist)) { + list_remove_head(iocblist, piocb, struct lpfc_iocbq, list); + + if (!piocb->iocb_cmpl) + lpfc_sli_release_iocbq(phba, piocb); + else { + piocb->iocb.ulpStatus = ulpstatus; + piocb->iocb.un.ulpWord[4] = ulpWord4; + (piocb->iocb_cmpl) (phba, piocb, piocb); + } + } + return; +} + +/** + * lpfc_sli_iocb_cmd_type - Get the iocb type + * @iocb_cmnd: iocb command code. * * This function is called by ring event handler function to get the iocb type. * This function translates the iocb command to an iocb command type used to @@ -295,7 +327,7 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd) } /** - * lpfc_sli_ring_map: Issue config_ring mbox for all rings. + * lpfc_sli_ring_map - Issue config_ring mbox for all rings * @phba: Pointer to HBA context object. * * This function is called from SLI initialization code @@ -338,7 +370,7 @@ lpfc_sli_ring_map(struct lpfc_hba *phba) } /** - * lpfc_sli_ringtxcmpl_put: Adds new iocb to the txcmplq. + * lpfc_sli_ringtxcmpl_put - Adds new iocb to the txcmplq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to the driver iocb object. @@ -370,7 +402,7 @@ lpfc_sli_ringtxcmpl_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_ringtx_get: Get first element of the txq. + * lpfc_sli_ringtx_get - Get first element of the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -391,7 +423,7 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_next_iocb_slot: Get next iocb slot in the ring. + * lpfc_sli_next_iocb_slot - Get next iocb slot in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -445,7 +477,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_next_iotag: Get an iotag for the iocb. + * lpfc_sli_next_iotag - Get an iotag for the iocb * @phba: Pointer to HBA context object. * @iocbq: Pointer to driver iocb object. * @@ -520,7 +552,7 @@ lpfc_sli_next_iotag(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) } /** - * lpfc_sli_submit_iocb: Submit an iocb to the firmware. + * lpfc_sli_submit_iocb - Submit an iocb to the firmware * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @iocb: Pointer to iocb slot in the ring. @@ -577,7 +609,7 @@ lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_update_full_ring: Update the chip attention register. + * lpfc_sli_update_full_ring - Update the chip attention register * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -608,7 +640,7 @@ lpfc_sli_update_full_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_update_ring: Update chip attention register. + * lpfc_sli_update_ring - Update chip attention register * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -632,7 +664,7 @@ lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_resume_iocb: Process iocbs in the txq. + * lpfc_sli_resume_iocb - Process iocbs in the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -672,7 +704,7 @@ lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_sli_next_hbq_slot: Get next hbq entry for the HBQ. + * lpfc_sli_next_hbq_slot - Get next hbq entry for the HBQ * @phba: Pointer to HBA context object. * @hbqno: HBQ number. * @@ -717,7 +749,7 @@ lpfc_sli_next_hbq_slot(struct lpfc_hba *phba, uint32_t hbqno) } /** - * lpfc_sli_hbqbuf_free_all: Free all the hbq buffers. + * lpfc_sli_hbqbuf_free_all - Free all the hbq buffers * @phba: Pointer to HBA context object. * * This function is called with no lock held to free all the @@ -771,7 +803,7 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba) } /** - * lpfc_sli_hbq_to_firmware: Post the hbq buffer to firmware. + * lpfc_sli_hbq_to_firmware - Post the hbq buffer to firmware * @phba: Pointer to HBA context object. * @hbqno: HBQ number. * @hbq_buf: Pointer to HBQ buffer. @@ -818,8 +850,8 @@ static struct lpfc_hbq_init lpfc_els_hbq = { .profile = 0, .ring_mask = (1 << LPFC_ELS_RING), .buffer_count = 0, - .init_count = 20, - .add_count = 5, + .init_count = 40, + .add_count = 40, }; /* HBQ for the extra ring if needed */ @@ -841,7 +873,7 @@ struct lpfc_hbq_init *lpfc_hbq_defs[] = { }; /** - * lpfc_sli_hbqbuf_fill_hbqs: Post more hbq buffers to HBQ. + * lpfc_sli_hbqbuf_fill_hbqs - Post more hbq buffers to HBQ * @phba: Pointer to HBA context object. * @hbqno: HBQ number. * @count: Number of HBQ buffers to be posted. @@ -901,7 +933,7 @@ err: } /** - * lpfc_sli_hbqbuf_add_hbqs: Post more HBQ buffers to firmware. + * lpfc_sli_hbqbuf_add_hbqs - Post more HBQ buffers to firmware * @phba: Pointer to HBA context object. * @qno: HBQ number. * @@ -917,7 +949,7 @@ lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) } /** - * lpfc_sli_hbqbuf_init_hbqs: Post initial buffers to the HBQ. + * lpfc_sli_hbqbuf_init_hbqs - Post initial buffers to the HBQ * @phba: Pointer to HBA context object. * @qno: HBQ queue number. * @@ -933,7 +965,7 @@ lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno) } /** - * lpfc_sli_hbqbuf_find: Find the hbq buffer associated with a tag. + * lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag * @phba: Pointer to HBA context object. * @tag: Tag of the hbq buffer. * @@ -966,7 +998,7 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag) } /** - * lpfc_sli_free_hbq: Give back the hbq buffer to firmware. + * lpfc_sli_free_hbq - Give back the hbq buffer to firmware * @phba: Pointer to HBA context object. * @hbq_buffer: Pointer to HBQ buffer. * @@ -988,7 +1020,7 @@ lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer) } /** - * lpfc_sli_chk_mbx_command: Check if the mailbox is a legitimate mailbox. + * lpfc_sli_chk_mbx_command - Check if the mailbox is a legitimate mailbox * @mbxCommand: mailbox command code. * * This function is called by the mailbox event handler function to verify @@ -1064,8 +1096,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) } /** - * lpfc_sli_wake_mbox_wait: Completion handler for mbox issued from - * lpfc_sli_issue_mbox_wait. + * lpfc_sli_wake_mbox_wait - lpfc_sli_issue_mbox_wait mbox completion handler * @phba: Pointer to HBA context object. * @pmboxq: Pointer to mailbox command. * @@ -1096,7 +1127,7 @@ lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) /** - * lpfc_sli_def_mbox_cmpl: Default mailbox completion handler. + * lpfc_sli_def_mbox_cmpl - Default mailbox completion handler * @phba: Pointer to HBA context object. * @pmb: Pointer to mailbox object. * @@ -1140,7 +1171,7 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /** - * lpfc_sli_handle_mb_event: Handle mailbox completions from firmware. + * lpfc_sli_handle_mb_event - Handle mailbox completions from firmware * @phba: Pointer to HBA context object. * * This function is called with no lock held. This function processes all @@ -1260,7 +1291,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba) } /** - * lpfc_sli_get_buff: Get the buffer associated with the buffer tag. + * lpfc_sli_get_buff - Get the buffer associated with the buffer tag * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @tag: buffer tag. @@ -1288,7 +1319,7 @@ lpfc_sli_get_buff(struct lpfc_hba *phba, /** - * lpfc_sli_process_unsol_iocb: Unsolicited iocb handler. + * lpfc_sli_process_unsol_iocb - Unsolicited iocb handler * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @saveq: Pointer to the unsolicited iocb. @@ -1484,7 +1515,7 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_iocbq_lookup: Find command iocb for the given response iocb. + * lpfc_sli_iocbq_lookup - Find command iocb for the given response iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @prspiocb: Pointer to response iocb object. @@ -1521,7 +1552,7 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba, } /** - * lpfc_sli_process_sol_iocb: process solicited iocb completion. + * lpfc_sli_process_sol_iocb - process solicited iocb completion * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @saveq: Pointer to the response iocb to be processed. @@ -1597,7 +1628,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, * Ring <ringno> handler: unexpected completion IoTag * <IoTag> */ - lpfc_printf_vlog(cmdiocbp->vport, KERN_WARNING, LOG_SLI, + lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, "0322 Ring %d handler: " "unexpected completion IoTag x%x " "Data: x%x x%x x%x x%x\n", @@ -1614,7 +1645,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_rsp_pointers_error: Response ring pointer error handler. + * lpfc_sli_rsp_pointers_error - Response ring pointer error handler * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -1652,7 +1683,7 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** - * lpfc_poll_eratt: Error attention polling timer timeout handler. + * lpfc_poll_eratt - Error attention polling timer timeout handler * @ptr: Pointer to address of HBA context object. * * This function is invoked by the Error Attention polling timer when the @@ -1682,7 +1713,7 @@ void lpfc_poll_eratt(unsigned long ptr) } /** - * lpfc_sli_poll_fcp_ring: Handle FCP ring completion in polling mode. + * lpfc_sli_poll_fcp_ring - Handle FCP ring completion in polling mode * @phba: Pointer to HBA context object. * * This function is called from lpfc_queuecommand, lpfc_poll_timeout, @@ -1845,7 +1876,7 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba) } /** - * lpfc_sli_handle_fast_ring_event: Handle ring events on FCP ring. + * lpfc_sli_handle_fast_ring_event - Handle ring events on FCP ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @mask: Host attention register mask for this ring. @@ -2037,7 +2068,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba, } /** - * lpfc_sli_handle_slow_ring_event: Handle ring events for non-FCP rings. + * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @mask: Host attention register mask for this ring. @@ -2311,7 +2342,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, } /** - * lpfc_sli_abort_iocb_ring: Abort all iocbs in the ring. + * lpfc_sli_abort_iocb_ring - Abort all iocbs in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @@ -2325,7 +2356,6 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) { LIST_HEAD(completions); struct lpfc_iocbq *iocb, *next_iocb; - IOCB_t *cmd = NULL; if (pring->ringno == LPFC_ELS_RING) { lpfc_fabric_abort_hba(phba); @@ -2344,23 +2374,13 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) spin_unlock_irq(&phba->hbalock); - while (!list_empty(&completions)) { - iocb = list_get_first(&completions, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); } /** - * lpfc_sli_flush_fcp_rings: flush all iocbs in the fcp ring. + * lpfc_sli_flush_fcp_rings - flush all iocbs in the fcp ring * @phba: Pointer to HBA context object. * * This function flushes all iocbs in the fcp ring and frees all the iocb @@ -2374,8 +2394,6 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba) { LIST_HEAD(txq); LIST_HEAD(txcmplq); - struct lpfc_iocbq *iocb; - IOCB_t *cmd = NULL; struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; @@ -2393,38 +2411,16 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba) spin_unlock_irq(&phba->hbalock); /* Flush the txq */ - while (!list_empty(&txq)) { - iocb = list_get_first(&txq, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); /* Flush the txcmpq */ - while (!list_empty(&txcmplq)) { - iocb = list_get_first(&txcmplq, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - list_del_init(&iocb->list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); } /** - * lpfc_sli_brdready: Check for host status bits. + * lpfc_sli_brdready - Check for host status bits * @phba: Pointer to HBA context object. * @mask: Bit mask to be checked. * @@ -2484,7 +2480,7 @@ lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask) #define BARRIER_TEST_PATTERN (0xdeadbeef) /** - * lpfc_reset_barrier: Make HBA ready for HBA reset. + * lpfc_reset_barrier - Make HBA ready for HBA reset * @phba: Pointer to HBA context object. * * This function is called before resetting an HBA. This @@ -2564,7 +2560,7 @@ restore_hc: } /** - * lpfc_sli_brdkill: Issue a kill_board mailbox command. + * lpfc_sli_brdkill - Issue a kill_board mailbox command * @phba: Pointer to HBA context object. * * This function issues a kill_board mailbox command and waits for @@ -2651,7 +2647,7 @@ lpfc_sli_brdkill(struct lpfc_hba *phba) } /** - * lpfc_sli_brdreset: Reset the HBA. + * lpfc_sli_brdreset - Reset the HBA * @phba: Pointer to HBA context object. * * This function resets the HBA by writing HC_INITFF to the control @@ -2714,7 +2710,7 @@ lpfc_sli_brdreset(struct lpfc_hba *phba) } /** - * lpfc_sli_brdrestart: Restart the HBA. + * lpfc_sli_brdrestart - Restart the HBA * @phba: Pointer to HBA context object. * * This function is called in the SLI initialization code path to @@ -2781,7 +2777,7 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba) } /** - * lpfc_sli_chipset_init: Wait for the restart of the HBA after a restart. + * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart * @phba: Pointer to HBA context object. * * This function is called after a HBA restart to wait for successful @@ -2876,7 +2872,7 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) } /** - * lpfc_sli_hbq_count: Get the number of HBQs to be configured. + * lpfc_sli_hbq_count - Get the number of HBQs to be configured * * This function calculates and returns the number of HBQs required to be * configured. @@ -2888,7 +2884,7 @@ lpfc_sli_hbq_count(void) } /** - * lpfc_sli_hbq_entry_count: Calculate total number of hbq entries. + * lpfc_sli_hbq_entry_count - Calculate total number of hbq entries * * This function adds the number of hbq entries in every HBQ to get * the total number of hbq entries required for the HBA and returns @@ -2907,7 +2903,7 @@ lpfc_sli_hbq_entry_count(void) } /** - * lpfc_sli_hbq_size: Calculate memory required for all hbq entries. + * lpfc_sli_hbq_size - Calculate memory required for all hbq entries * * This function calculates amount of memory required for all hbq entries * to be configured and returns the total memory required. @@ -2919,7 +2915,7 @@ lpfc_sli_hbq_size(void) } /** - * lpfc_sli_hbq_setup: configure and initialize HBQs. + * lpfc_sli_hbq_setup - configure and initialize HBQs * @phba: Pointer to HBA context object. * * This function is called during the SLI initialization to configure @@ -2988,7 +2984,7 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba) } /** - * lpfc_sli_config_port: Issue config port mailbox command. + * lpfc_sli_config_port - Issue config port mailbox command * @phba: Pointer to HBA context object. * @sli_mode: sli mode - 2/3 * @@ -3114,7 +3110,7 @@ do_prep_failed: /** - * lpfc_sli_hba_setup: SLI intialization function. + * lpfc_sli_hba_setup - SLI intialization function * @phba: Pointer to HBA context object. * * This function is the main SLI intialization function. This function @@ -3206,7 +3202,7 @@ lpfc_sli_hba_setup_error: /** - * lpfc_mbox_timeout: Timeout call back function for mbox timer. + * lpfc_mbox_timeout - Timeout call back function for mbox timer * @ptr: context object - pointer to hba structure. * * This is the callback function for mailbox timer. The mailbox @@ -3237,7 +3233,7 @@ lpfc_mbox_timeout(unsigned long ptr) /** - * lpfc_mbox_timeout_handler: Worker thread function to handle mailbox timeout. + * lpfc_mbox_timeout_handler - Worker thread function to handle mailbox timeout * @phba: Pointer to HBA context object. * * This function is called from worker thread when a mailbox command times out. @@ -3252,6 +3248,21 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; + /* Check the pmbox pointer first. There is a race condition + * between the mbox timeout handler getting executed in the + * worklist and the mailbox actually completing. When this + * race condition occurs, the mbox_active will be NULL. + */ + spin_lock_irq(&phba->hbalock); + if (pmbox == NULL) { + lpfc_printf_log(phba, KERN_WARNING, + LOG_MBOX | LOG_SLI, + "0353 Active Mailbox cleared - mailbox timeout " + "exiting\n"); + spin_unlock_irq(&phba->hbalock); + return; + } + /* Mbox cmd <mbxCommand> timeout */ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "0310 Mailbox command x%x timeout Data: x%x x%x x%p\n", @@ -3259,6 +3270,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) phba->pport->port_state, phba->sli.sli_flag, phba->sli.mbox_active); + spin_unlock_irq(&phba->hbalock); /* Setting state unknown so lpfc_sli_abort_iocb_ring * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing @@ -3295,7 +3307,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) } /** - * lpfc_sli_issue_mbox: Issue a mailbox command to firmware. + * lpfc_sli_issue_mbox - Issue a mailbox command to firmware * @phba: Pointer to HBA context object. * @pmbox: Pointer to mailbox object. * @flag: Flag indicating how the mailbox need to be processed. @@ -3365,6 +3377,12 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) goto out_not_finished; } + /* If HBA has a deferred error attention, fail the iocb. */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irqrestore(&phba->hbalock, drvr_flag); + goto out_not_finished; + } + psli = &phba->sli; mb = &pmbox->mb; @@ -3632,7 +3650,7 @@ out_not_finished: } /** - * __lpfc_sli_ringtx_put: Add an iocb to the txq. + * __lpfc_sli_ringtx_put - Add an iocb to the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to address of newly added command iocb. @@ -3651,7 +3669,7 @@ __lpfc_sli_ringtx_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_next_iocb: Get the next iocb in the txq. + * lpfc_sli_next_iocb - Get the next iocb in the txq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to address of newly added command iocb. @@ -3683,7 +3701,7 @@ lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * __lpfc_sli_issue_iocb: Lockless version of lpfc_sli_issue_iocb. + * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to command iocb. @@ -3729,6 +3747,10 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, if (unlikely(pci_channel_offline(phba->pcidev))) return IOCB_ERROR; + /* If HBA has a deferred error attention, fail the iocb. */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) + return IOCB_ERROR; + /* * We should never get an IOCB if we are in a < LINK_DOWN state */ @@ -3813,7 +3835,7 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, /** - * lpfc_sli_issue_iocb: Wrapper function for __lpfc_sli_issue_iocb. + * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @piocb: Pointer to command iocb. @@ -3840,7 +3862,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_extra_ring_setup: Extra ring setup function. + * lpfc_extra_ring_setup - Extra ring setup function * @phba: Pointer to HBA context object. * * This function is called while driver attaches with the @@ -3886,7 +3908,7 @@ lpfc_extra_ring_setup( struct lpfc_hba *phba) } /** - * lpfc_sli_async_event_handler: ASYNC iocb handler function. + * lpfc_sli_async_event_handler - ASYNC iocb handler function * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @iocbq: Pointer to iocb object. @@ -3907,6 +3929,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, uint16_t temp; struct temp_event temp_event_data; struct Scsi_Host *shost; + uint32_t *iocb_w; icmd = &iocbq->iocb; evt_code = icmd->un.asyncstat.evt_code; @@ -3914,13 +3937,23 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, if ((evt_code != ASYNC_TEMP_WARN) && (evt_code != ASYNC_TEMP_SAFE)) { + iocb_w = (uint32_t *) icmd; lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0346 Ring %d handler: unexpected ASYNC_STATUS" - " evt_code 0x%x\n", + " evt_code 0x%x \n" + "W0 0x%08x W1 0x%08x W2 0x%08x W3 0x%08x\n" + "W4 0x%08x W5 0x%08x W6 0x%08x W7 0x%08x\n" + "W8 0x%08x W9 0x%08x W10 0x%08x W11 0x%08x\n" + "W12 0x%08x W13 0x%08x W14 0x%08x W15 0x%08x\n", pring->ringno, - icmd->un.asyncstat.evt_code); + icmd->un.asyncstat.evt_code, + iocb_w[0], iocb_w[1], iocb_w[2], iocb_w[3], + iocb_w[4], iocb_w[5], iocb_w[6], iocb_w[7], + iocb_w[8], iocb_w[9], iocb_w[10], iocb_w[11], + iocb_w[12], iocb_w[13], iocb_w[14], iocb_w[15]); + return; } temp_event_data.data = (uint32_t)temp; @@ -3954,7 +3987,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, /** - * lpfc_sli_setup: SLI ring setup function. + * lpfc_sli_setup - SLI ring setup function * @phba: Pointer to HBA context object. * * lpfc_sli_setup sets up rings of the SLI interface with @@ -4076,7 +4109,7 @@ lpfc_sli_setup(struct lpfc_hba *phba) } /** - * lpfc_sli_queue_setup: Queue initialization function. + * lpfc_sli_queue_setup - Queue initialization function * @phba: Pointer to HBA context object. * * lpfc_sli_queue_setup sets up mailbox queues and iocb queues for each @@ -4115,7 +4148,7 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba) } /** - * lpfc_sli_host_down: Vport cleanup function. + * lpfc_sli_host_down - Vport cleanup function * @vport: Pointer to virtual port object. * * lpfc_sli_host_down is called to clean up the resources @@ -4179,22 +4212,14 @@ lpfc_sli_host_down(struct lpfc_vport *vport) spin_unlock_irqrestore(&phba->hbalock, flags); - while (!list_empty(&completions)) { - list_remove_head(&completions, iocb, struct lpfc_iocbq, list); - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT; - iocb->iocb.un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); return 1; } /** - * lpfc_sli_hba_down: Resource cleanup function for the HBA. + * lpfc_sli_hba_down - Resource cleanup function for the HBA * @phba: Pointer to HBA context object. * * This function cleans up all iocb, buffers, mailbox commands @@ -4216,8 +4241,6 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) struct lpfc_sli_ring *pring; struct lpfc_dmabuf *buf_ptr; LPFC_MBOXQ_t *pmb; - struct lpfc_iocbq *iocb; - IOCB_t *cmd = NULL; int i; unsigned long flags = 0; @@ -4245,18 +4268,9 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) } spin_unlock_irqrestore(&phba->hbalock, flags); - while (!list_empty(&completions)) { - list_remove_head(&completions, iocb, struct lpfc_iocbq, list); - cmd = &iocb->iocb; - - if (!iocb->iocb_cmpl) - lpfc_sli_release_iocbq(phba, iocb); - else { - cmd->ulpStatus = IOSTAT_LOCAL_REJECT; - cmd->un.ulpWord[4] = IOERR_SLI_DOWN; - (iocb->iocb_cmpl) (phba, iocb, iocb); - } - } + /* Cancel all the IOCBs from the completions list */ + lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, + IOERR_SLI_DOWN); spin_lock_irqsave(&phba->hbalock, flags); list_splice_init(&phba->elsbuf, &completions); @@ -4299,7 +4313,7 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) } /** - * lpfc_sli_pcimem_bcopy: SLI memory copy function. + * lpfc_sli_pcimem_bcopy - SLI memory copy function * @srcp: Source memory pointer. * @destp: Destination memory pointer. * @cnt: Number of words required to be copied. @@ -4329,7 +4343,7 @@ lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt) /** - * lpfc_sli_ringpostbuf_put: Function to add a buffer to postbufq. + * lpfc_sli_ringpostbuf_put - Function to add a buffer to postbufq * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @mp: Pointer to driver buffer object. @@ -4352,8 +4366,7 @@ lpfc_sli_ringpostbuf_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_get_buffer_tag: Tag allocation function for a buffer posted - * using CMD_QUE_XRI64_CX iocb. + * lpfc_sli_get_buffer_tag - allocates a tag for a CMD_QUE_XRI64_CX buffer * @phba: Pointer to HBA context object. * * When HBQ is enabled, buffers are searched based on tags. This function @@ -4378,8 +4391,7 @@ lpfc_sli_get_buffer_tag(struct lpfc_hba *phba) } /** - * lpfc_sli_ring_taggedbuf_get: Search HBQ buffer associated with - * posted using CMD_QUE_XRI64_CX iocb. + * lpfc_sli_ring_taggedbuf_get - find HBQ buffer associated with given tag * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @tag: Buffer tag. @@ -4422,8 +4434,7 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_ringpostbuf_get: SLI2 buffer search function for - * unsolicited ct and els events. + * lpfc_sli_ringpostbuf_get - search buffers for unsolicited CT and ELS events * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @phys: DMA address of the buffer. @@ -4466,7 +4477,7 @@ lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_abort_els_cmpl: Completion handler for the els abort iocbs. + * lpfc_sli_abort_els_cmpl - Completion handler for the els abort iocbs * @phba: Pointer to HBA context object. * @cmdiocb: Pointer to driver command iocb object. * @rspiocb: Pointer to driver response iocb object. @@ -4542,7 +4553,7 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_ignore_els_cmpl: Completion handler for aborted ELS command. + * lpfc_ignore_els_cmpl - Completion handler for aborted ELS command * @phba: Pointer to HBA context object. * @cmdiocb: Pointer to driver command iocb object. * @rspiocb: Pointer to driver response iocb object. @@ -4572,7 +4583,7 @@ lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_sli_issue_abort_iotag: Abort function for a command iocb. + * lpfc_sli_issue_abort_iotag - Abort function for a command iocb * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. * @cmdiocb: Pointer to driver command iocb object. @@ -4658,15 +4669,14 @@ abort_iotag_exit: } /** - * lpfc_sli_validate_fcp_iocb: Filtering function, used to find commands - * associated with a vport/SCSI target/lun. + * lpfc_sli_validate_fcp_iocb - find commands associated with a vport or LUN * @iocbq: Pointer to driver iocb object. * @vport: Pointer to driver virtual port object. * @tgt_id: SCSI ID of the target. * @lun_id: LUN ID of the scsi device. * @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST * - * This function acts as iocb filter for functions which abort or count + * This function acts as an iocb filter for functions which abort or count * all FCP iocbs pending on a lun/SCSI target/SCSI host. It will return * 0 if the filtering criteria is met for the given iocb and will return * 1 if the filtering criteria is not met. @@ -4724,7 +4734,7 @@ lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, struct lpfc_vport *vport, } /** - * lpfc_sli_sum_iocb: Function to count the number of FCP iocbs pending. + * lpfc_sli_sum_iocb - Function to count the number of FCP iocbs pending * @vport: Pointer to virtual port. * @tgt_id: SCSI ID of the target. * @lun_id: LUN ID of the scsi device. @@ -4762,8 +4772,7 @@ lpfc_sli_sum_iocb(struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id, } /** - * lpfc_sli_abort_fcp_cmpl: Completion handler function for an aborted - * FCP iocb. + * lpfc_sli_abort_fcp_cmpl - Completion handler function for aborted FCP IOCBs * @phba: Pointer to HBA context object * @cmdiocb: Pointer to command iocb object. * @rspiocb: Pointer to response iocb object. @@ -4781,8 +4790,7 @@ lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } /** - * lpfc_sli_abort_iocb: This function issue abort for all SCSI commands - * pending on a SCSI host(vport)/target/lun. + * lpfc_sli_abort_iocb - issue abort for all commands on a host/target/LUN * @vport: Pointer to virtual port. * @pring: Pointer to driver SLI ring object. * @tgt_id: SCSI ID of the target. @@ -4854,8 +4862,7 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring, } /** - * lpfc_sli_wake_iocb_wait: iocb completion handler for iocb issued using - * lpfc_sli_issue_iocb_wait. + * lpfc_sli_wake_iocb_wait - lpfc_sli_issue_iocb_wait's completion handler * @phba: Pointer to HBA context object. * @cmdiocbq: Pointer to command iocb. * @rspiocbq: Pointer to response iocb. @@ -4893,7 +4900,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba, } /** - * lpfc_sli_issue_iocb_wait: Synchronous function to issue iocb commands. + * lpfc_sli_issue_iocb_wait - Synchronous function to issue iocb commands * @phba: Pointer to HBA context object.. * @pring: Pointer to sli ring. * @piocb: Pointer to command iocb. @@ -5000,7 +5007,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba, } /** - * lpfc_sli_issue_mbox_wait: Synchronous function to issue mailbox. + * lpfc_sli_issue_mbox_wait - Synchronous function to issue mailbox * @phba: Pointer to HBA context object. * @pmboxq: Pointer to driver mailbox object. * @timeout: Timeout in number of seconds. @@ -5070,7 +5077,7 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq, } /** - * lpfc_sli_flush_mbox_queue: mailbox queue cleanup function. + * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function * @phba: Pointer to HBA context. * * This function is called to cleanup any pending mailbox @@ -5113,7 +5120,7 @@ lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba) } /** - * lpfc_sli_check_eratt: check error attention events + * lpfc_sli_check_eratt - check error attention events * @phba: Pointer to HBA context. * * This function is called form timer soft interrupt context to check HBA's @@ -5145,11 +5152,31 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba) return 0; } + /* + * If there is deferred error attention, do not check for error + * attention + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return 0; + } + /* Read chip Host Attention (HA) register */ ha_copy = readl(phba->HAregaddr); if (ha_copy & HA_ERATT) { /* Read host status register to retrieve error event */ lpfc_sli_read_hs(phba); + + /* Check if there is a deferred error condition is active */ + if ((HS_FFER1 & phba->work_hs) && + ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 | + HS_FFER6 | HS_FFER7) & phba->work_hs)) { + phba->hba_flag |= DEFER_ERATT; + /* Clear all interrupt enable conditions */ + writel(0, phba->HCregaddr); + readl(phba->HCregaddr); + } + /* Set the driver HA work bitmap */ phba->work_ha |= HA_ERATT; /* Indicate polling handles this ERATT */ @@ -5162,7 +5189,7 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba) } /** - * lpfc_sp_intr_handler: The slow-path interrupt handler of lpfc driver. + * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver * @irq: Interrupt number. * @dev_id: The device context pointer. * @@ -5238,6 +5265,16 @@ lpfc_sp_intr_handler(int irq, void *dev_id) /* Indicate interrupt handler handles ERATT */ phba->hba_flag |= HBA_ERATT_HANDLED; } + + /* + * If there is deferred error attention, do not check for any + * interrupt. + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return IRQ_NONE; + } + /* Clear up only attention source related to slow-path */ writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)), phba->HAregaddr); @@ -5309,8 +5346,22 @@ lpfc_sp_intr_handler(int irq, void *dev_id) } } spin_lock_irqsave(&phba->hbalock, iflag); - if (work_ha_copy & HA_ERATT) + if (work_ha_copy & HA_ERATT) { lpfc_sli_read_hs(phba); + /* + * Check if there is a deferred error condition + * is active + */ + if ((HS_FFER1 & phba->work_hs) && + ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 | + HS_FFER6 | HS_FFER7) & phba->work_hs)) { + phba->hba_flag |= DEFER_ERATT; + /* Clear all interrupt enable conditions */ + writel(0, phba->HCregaddr); + readl(phba->HCregaddr); + } + } + if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) { pmb = phba->sli.mbox_active; pmbox = &pmb->mb; @@ -5423,7 +5474,7 @@ send_current_mbox: } /* lpfc_sp_intr_handler */ /** - * lpfc_fp_intr_handler: The fast-path interrupt handler of lpfc driver. + * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver * @irq: Interrupt number. * @dev_id: The device context pointer. * @@ -5474,6 +5525,14 @@ lpfc_fp_intr_handler(int irq, void *dev_id) ha_copy = readl(phba->HAregaddr); /* Clear up only attention source related to fast-path */ spin_lock_irqsave(&phba->hbalock, iflag); + /* + * If there is deferred error attention, do not check for + * any interrupt. + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return IRQ_NONE; + } writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)), phba->HAregaddr); readl(phba->HAregaddr); /* flush */ @@ -5510,7 +5569,7 @@ lpfc_fp_intr_handler(int irq, void *dev_id) } /* lpfc_fp_intr_handler */ /** - * lpfc_intr_handler: The device-level interrupt handler of lpfc driver. + * lpfc_intr_handler - The device-level interrupt handler of lpfc driver * @irq: Interrupt number. * @dev_id: The device context pointer. * @@ -5566,6 +5625,14 @@ lpfc_intr_handler(int irq, void *dev_id) phba->hba_flag |= HBA_ERATT_HANDLED; } + /* + * If there is deferred error attention, do not check for any interrupt. + */ + if (unlikely(phba->hba_flag & DEFER_ERATT)) { + spin_unlock_irq(&phba->hbalock); + return IRQ_NONE; + } + /* Clear attention sources except link and error attentions */ writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr); readl(phba->HAregaddr); /* flush */ diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 7e32e95c5392..e599519e3078 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2008 Emulex. All rights reserved. * + * Copyright (C) 2004-2009 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.0" +#define LPFC_DRIVER_VERSION "8.3.1" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" @@ -26,4 +26,4 @@ #define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \ LPFC_DRIVER_VERSION -#define LPFC_COPYRIGHT "Copyright(c) 2004-2008 Emulex. All rights reserved." +#define LPFC_COPYRIGHT "Copyright(c) 2004-2009 Emulex. All rights reserved." diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 63b54c66756c..917ad56b0aff 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -206,7 +206,7 @@ lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport) } /** - * lpfc_discovery_wait: Wait for driver discovery to quiesce. + * lpfc_discovery_wait - Wait for driver discovery to quiesce * @vport: The virtual port for which this call is being executed. * * This driver calls this routine specifically from lpfc_vport_delete @@ -741,7 +741,7 @@ lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports) /** - * lpfc_vport_reset_stat_data: Reset the statistical data for the vport. + * lpfc_vport_reset_stat_data - Reset the statistical data for the vport * @vport: Pointer to vport object. * * This function resets the statistical data for the vport. This function @@ -763,8 +763,7 @@ lpfc_vport_reset_stat_data(struct lpfc_vport *vport) /** - * lpfc_alloc_bucket: Allocate data buffer required for collecting - * statistical data. + * lpfc_alloc_bucket - Allocate data buffer required for statistical data * @vport: Pointer to vport object. * * This function allocates data buffer required for all the FC @@ -797,8 +796,7 @@ lpfc_alloc_bucket(struct lpfc_vport *vport) } /** - * lpfc_free_bucket: Free data buffer required for collecting - * statistical data. + * lpfc_free_bucket - Free data buffer required for statistical data * @vport: Pointer to vport object. * * Th function frees statistical data buffer of all the FC diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index a91f5143ceac..f3da592f7bcc 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -636,6 +636,14 @@ _base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc) static irqreturn_t _base_interrupt(int irq, void *bus_id) { + union reply_descriptor { + u64 word; + struct { + u32 low; + u32 high; + } u; + }; + union reply_descriptor rd; u32 post_index, post_index_next, completed_cmds; u8 request_desript_type; u16 smid; @@ -656,7 +664,8 @@ _base_interrupt(int irq, void *bus_id) completed_cmds = 0; do { - if (ioc->reply_post_free[post_index].Words == ~0ULL) + rd.word = ioc->reply_post_free[post_index].Words; + if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX) goto out; reply = 0; cb_idx = 0xFF; @@ -721,7 +730,7 @@ _base_interrupt(int irq, void *bus_id) for (i = 0 ; i < completed_cmds; i++) { post_index = post_index_next; /* poison the reply post descriptor */ - ioc->reply_post_free[post_index_next].Words = ~0ULL; + ioc->reply_post_free[post_index_next].Words = ULLONG_MAX; post_index_next = (post_index == (ioc->reply_post_queue_depth - 1)) ? 0 : post_index + 1; @@ -1387,6 +1396,64 @@ mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid, } /** + * _base_display_dell_branding - Disply branding string + * @ioc: per adapter object + * + * Return nothing. + */ +static void +_base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc) +{ + char dell_branding[MPT2SAS_DELL_BRANDING_SIZE]; + + if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL) + return; + + memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE); + switch (ioc->pdev->subsystem_device) { + case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID: + strncpy(dell_branding, + MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID: + strncpy(dell_branding, + MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID: + strncpy(dell_branding, + MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_PERC_H200_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + case MPT2SAS_DELL_6GBPS_SAS_SSDID: + strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING, + MPT2SAS_DELL_BRANDING_SIZE - 1); + break; + default: + sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device); + break; + } + + printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X)," + " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding, + ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor, + ioc->pdev->subsystem_device); +} + +/** * _base_display_ioc_capabilities - Disply IOC's capabilities. * @ioc: per adapter object * @@ -1427,6 +1494,8 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc) i++; } + _base_display_dell_branding(ioc); + i = 0; printk("), "); printk("Capabilities=("); @@ -3068,7 +3137,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, /* initialize Reply Post Free Queue */ for (i = 0; i < ioc->reply_post_queue_depth; i++) - ioc->reply_post_free[i].Words = ~0ULL; + ioc->reply_post_free[i].Words = ULLONG_MAX; r = _base_send_ioc_init(ioc, VF_ID, sleep_flag); if (r) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 6945ff4d382e..babd4cc0cb25 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -68,11 +68,11 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>" #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "00.100.11.16" +#define MPT2SAS_DRIVER_VERSION "01.100.02.00" #define MPT2SAS_MAJOR_VERSION 00 #define MPT2SAS_MINOR_VERSION 100 -#define MPT2SAS_BUILD_VERSION 11 -#define MPT2SAS_RELEASE_VERSION 16 +#define MPT2SAS_BUILD_VERSION 02 +#define MPT2SAS_RELEASE_VERSION 00 /* * Set MPT2SAS_SG_DEPTH value based on user input. @@ -130,6 +130,30 @@ #define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT /* + * Dell HBA branding + */ +#define MPT2SAS_DELL_BRANDING_SIZE 32 + +#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA" +#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter" +#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated" +#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular" +#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded" +#define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200" +#define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS" + +/* + * Dell HBA SSDIDs + */ +#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C +#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D +#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E +#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F +#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20 +#define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21 +#define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22 + +/* * per target private data */ #define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01 diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index 2d4f85c9d7a1..ba6ab170bdf0 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -64,6 +64,9 @@ static struct fasync_struct *async_queue; static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait); +static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, + u8 *issue_reset); + /** * enum block_state - blocking state * @NON_BLOCKING: non blocking @@ -378,10 +381,22 @@ _ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp) void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) { + int i; + u8 issue_reset; + switch (reset_phase) { case MPT2_IOC_PRE_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!(ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_REGISTERED)) + continue; + if ((ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_RELEASED)) + continue; + _ctl_send_release(ioc, i, &issue_reset); + } break; case MPT2_IOC_AFTER_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " @@ -395,6 +410,17 @@ mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) case MPT2_IOC_DONE_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); + + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!(ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_REGISTERED)) + continue; + if ((ioc->diag_buffer_status[i] & + MPT2_DIAG_BUFFER_IS_RELEASED)) + continue; + ioc->diag_buffer_status[i] |= + MPT2_DIAG_BUFFER_IS_DIAG_RESET; + } break; } } @@ -714,8 +740,10 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) { - if (_ctl_do_task_abort(ioc, &karg, tm_request)) + if (_ctl_do_task_abort(ioc, &karg, tm_request)) { + mpt2sas_base_free_smid(ioc, smid); goto out; + } } mutex_lock(&ioc->tm_cmds.mutex); @@ -915,9 +943,9 @@ _ctl_getiocinfo(void __user *arg) karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn); karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus); karg.firmware_version = ioc->facts.FWVersion.Word; - strncpy(karg.driver_version, MPT2SAS_DRIVER_VERSION, - MPT2_IOCTL_VERSION_LENGTH); - karg.driver_version[MPT2_IOCTL_VERSION_LENGTH - 1] = '\0'; + strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME); + strcat(karg.driver_version, "-"); + strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION); karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); if (copy_to_user(arg, &karg, sizeof(karg))) { @@ -1551,81 +1579,38 @@ _ctl_diag_query(void __user *arg) } /** - * _ctl_diag_release - request to send Diag Release Message to firmware - * @arg - user space buffer containing ioctl content - * @state - NON_BLOCKING or BLOCKING + * _ctl_send_release - Diag Release Message + * @ioc: per adapter object + * @buffer_type - specifies either TRACE or SNAPSHOT + * @issue_reset - specifies whether host reset is required. * - * This allows ownership of the specified buffer to returned to the driver, - * allowing an application to read the buffer without fear that firmware is - * overwritting information in the buffer. */ -static long -_ctl_diag_release(void __user *arg, enum block_state state) +static int +_ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset) { - struct mpt2_diag_release karg; - struct MPT2SAS_ADAPTER *ioc; - void *request_data; - int rc; Mpi2DiagReleaseRequest_t *mpi_request; Mpi2DiagReleaseReply_t *mpi_reply; - u8 buffer_type; - unsigned long timeleft; u16 smid; u16 ioc_status; - u8 issue_reset = 0; - - if (copy_from_user(&karg, arg, sizeof(karg))) { - printk(KERN_ERR "failure at %s:%d/%s()!\n", - __FILE__, __LINE__, __func__); - return -EFAULT; - } - if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) - return -ENODEV; + u32 ioc_state; + int rc; + unsigned long timeleft; dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, __func__)); - buffer_type = karg.unique_id & 0x000000ff; - if (!_ctl_diag_capability(ioc, buffer_type)) { - printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " - "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); - return -EPERM; - } - - if ((ioc->diag_buffer_status[buffer_type] & - MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { - printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " - "registered\n", ioc->name, __func__, buffer_type); - return -EINVAL; - } - - if (karg.unique_id != ioc->unique_id[buffer_type]) { - printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " - "registered\n", ioc->name, __func__, karg.unique_id); - return -EINVAL; - } - - if (ioc->diag_buffer_status[buffer_type] & - MPT2_DIAG_BUFFER_IS_RELEASED) { - printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " - "is already released\n", ioc->name, __func__, - buffer_type); - return 0; - } - - request_data = ioc->diag_buffer[buffer_type]; + rc = 0; + *issue_reset = 0; - if (!request_data) { - printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " - "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); - return -ENOMEM; + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " + "skipping due to FAULT state\n", ioc->name, + __func__)); + rc = -EAGAIN; + goto out; } - if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) - return -EAGAIN; - else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) - return -ERESTARTSYS; - if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) { printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n", ioc->name, __func__); @@ -1641,7 +1626,6 @@ _ctl_diag_release(void __user *arg, enum block_state state) goto out; } - rc = 0; ioc->ctl_cmds.status = MPT2_CMD_PENDING; memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz); mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); @@ -1660,8 +1644,9 @@ _ctl_diag_release(void __user *arg, enum block_state state) _debug_dump_mf(mpi_request, sizeof(Mpi2DiagReleaseRequest_t)/4); if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET)) - issue_reset = 1; - goto issue_host_reset; + *issue_reset = 1; + rc = -EFAULT; + goto out; } /* process the completed Reply Message Frame */ @@ -1687,14 +1672,101 @@ _ctl_diag_release(void __user *arg, enum block_state state) rc = -EFAULT; } - issue_host_reset: + out: + ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; + return rc; +} + +/** + * _ctl_diag_release - request to send Diag Release Message to firmware + * @arg - user space buffer containing ioctl content + * @state - NON_BLOCKING or BLOCKING + * + * This allows ownership of the specified buffer to returned to the driver, + * allowing an application to read the buffer without fear that firmware is + * overwritting information in the buffer. + */ +static long +_ctl_diag_release(void __user *arg, enum block_state state) +{ + struct mpt2_diag_release karg; + struct MPT2SAS_ADAPTER *ioc; + void *request_data; + int rc; + u8 buffer_type; + u8 issue_reset = 0; + + if (copy_from_user(&karg, arg, sizeof(karg))) { + printk(KERN_ERR "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -EFAULT; + } + if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) + return -ENODEV; + + dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, + __func__)); + + buffer_type = karg.unique_id & 0x000000ff; + if (!_ctl_diag_capability(ioc, buffer_type)) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -EPERM; + } + + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not " + "registered\n", ioc->name, __func__, buffer_type); + return -EINVAL; + } + + if (karg.unique_id != ioc->unique_id[buffer_type]) { + printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not " + "registered\n", ioc->name, __func__, karg.unique_id); + return -EINVAL; + } + + if (ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_RELEASED) { + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " + "is already released\n", ioc->name, __func__, + buffer_type); + return 0; + } + + request_data = ioc->diag_buffer[buffer_type]; + + if (!request_data) { + printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for " + "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type); + return -ENOMEM; + } + + /* buffers were released by due to host reset */ + if ((ioc->diag_buffer_status[buffer_type] & + MPT2_DIAG_BUFFER_IS_DIAG_RESET)) { + ioc->diag_buffer_status[buffer_type] |= + MPT2_DIAG_BUFFER_IS_RELEASED; + ioc->diag_buffer_status[buffer_type] &= + ~MPT2_DIAG_BUFFER_IS_DIAG_RESET; + printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) " + "was released due to host reset\n", ioc->name, __func__, + buffer_type); + return 0; + } + + if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex)) + return -EAGAIN; + else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) + return -ERESTARTSYS; + + rc = _ctl_send_release(ioc, buffer_type, &issue_reset); + if (issue_reset) mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); - out: - - ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; mutex_unlock(&ioc->ctl_cmds.mutex); return rc; } diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h index dbb6c0cf8889..4da11435533f 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h @@ -50,7 +50,7 @@ #endif #define MPT2SAS_DEV_NAME "mpt2ctl" -#define MPT2_MAGIC_NUMBER 'm' +#define MPT2_MAGIC_NUMBER 'L' #define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */ /** @@ -295,8 +295,9 @@ struct mpt2_ioctl_btdh_mapping { /* status bits for ioc->diag_buffer_status */ -#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01) -#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02) +#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01) +#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02) +#define MPT2_DIAG_BUFFER_IS_DIAG_RESET (0x04) /* application flags for mpt2_diag_register, mpt2_diag_query */ #define MPT2_APP_FLAGS_APP_OWNED (0x0001) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 0c463c483c02..e3a7967259e7 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -119,7 +119,7 @@ struct sense_info { */ struct fw_event_work { struct list_head list; - struct delayed_work work; + struct work_struct work; struct MPT2SAS_ADAPTER *ioc; u8 VF_ID; u8 host_reset_handling; @@ -516,12 +516,8 @@ _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc, handle = sas_device->handle; parent_handle = sas_device->parent_handle; sas_address = sas_device->sas_address; - if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) { + if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) _scsih_sas_device_remove(ioc, sas_device); - } else if (!sas_device->starget) { - mpt2sas_transport_port_remove(ioc, sas_address, parent_handle); - _scsih_sas_device_remove(ioc, sas_device); - } } /** @@ -1203,7 +1199,9 @@ scsih_target_destroy(struct scsi_target *starget) rphy = dev_to_rphy(starget->dev.parent); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, rphy->identify.sas_address); - if (sas_device) + if (sas_device && (sas_device->starget == starget) && + (sas_device->id == starget->id) && + (sas_device->channel == starget->channel)) sas_device->starget = NULL; spin_unlock_irqrestore(&ioc->sas_device_lock, flags); @@ -2009,8 +2007,8 @@ _scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) spin_lock_irqsave(&ioc->fw_event_lock, flags); list_add_tail(&fw_event->list, &ioc->fw_event_list); - INIT_DELAYED_WORK(&fw_event->work, _firmware_event_work); - queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, 1); + INIT_WORK(&fw_event->work, _firmware_event_work); + queue_work(ioc->firmware_event_thread, &fw_event->work); spin_unlock_irqrestore(&ioc->fw_event_lock, flags); } @@ -2054,7 +2052,7 @@ _scsih_fw_event_requeue(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work return; spin_lock_irqsave(&ioc->fw_event_lock, flags); - queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, delay); + queue_work(ioc->firmware_event_thread, &fw_event->work); spin_unlock_irqrestore(&ioc->fw_event_lock, flags); } @@ -2863,8 +2861,9 @@ scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply) struct sense_info data; const void *sense_data = mpt2sas_base_get_sense_buffer(ioc, smid); - memcpy(scmd->sense_buffer, sense_data, + u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE, le32_to_cpu(mpi_reply->SenseCount)); + memcpy(scmd->sense_buffer, sense_data, sz); _scsih_normalize_sense(scmd->sense_buffer, &data); /* failure prediction threshold exceeded */ if (data.asc == 0x5D) @@ -3923,7 +3922,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, mpt2sas_scsih_issue_tm(ioc, handle, lun, MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30); - termination_count += le32_to_cpu(mpi_reply->TerminationCount); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) && (mpi_reply->ResponseCode == @@ -3933,10 +3932,10 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, continue; mpt2sas_scsih_issue_tm(ioc, handle, lun, - MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30); + MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; termination_count += le32_to_cpu(mpi_reply->TerminationCount); } - ioc->tm_cmds.status = MPT2_CMD_NOT_USED; ioc->broadcast_aen_busy = 0; mutex_unlock(&ioc->tm_cmds.mutex); @@ -4962,7 +4961,7 @@ static void _firmware_event_work(struct work_struct *work) { struct fw_event_work *fw_event = container_of(work, - struct fw_event_work, work.work); + struct fw_event_work, work); unsigned long flags; struct MPT2SAS_ADAPTER *ioc = fw_event->ioc; diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 2a5f0777148d..1ce6b24abab2 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -205,6 +205,74 @@ static unsigned _osd_req_alist_elem_size(struct osd_request *or, unsigned len) osdv2_attr_list_elem_size(len); } +static void _osd_req_alist_elem_encode(struct osd_request *or, + void *attr_last, const struct osd_attr *oa) +{ + if (osd_req_is_ver1(or)) { + struct osdv1_attributes_list_element *attr = attr_last; + + attr->attr_page = cpu_to_be32(oa->attr_page); + attr->attr_id = cpu_to_be32(oa->attr_id); + attr->attr_bytes = cpu_to_be16(oa->len); + memcpy(attr->attr_val, oa->val_ptr, oa->len); + } else { + struct osdv2_attributes_list_element *attr = attr_last; + + attr->attr_page = cpu_to_be32(oa->attr_page); + attr->attr_id = cpu_to_be32(oa->attr_id); + attr->attr_bytes = cpu_to_be16(oa->len); + memcpy(attr->attr_val, oa->val_ptr, oa->len); + } +} + +static int _osd_req_alist_elem_decode(struct osd_request *or, + void *cur_p, struct osd_attr *oa, unsigned max_bytes) +{ + unsigned inc; + if (osd_req_is_ver1(or)) { + struct osdv1_attributes_list_element *attr = cur_p; + + if (max_bytes < sizeof(*attr)) + return -1; + + oa->len = be16_to_cpu(attr->attr_bytes); + inc = _osd_req_alist_elem_size(or, oa->len); + if (inc > max_bytes) + return -1; + + oa->attr_page = be32_to_cpu(attr->attr_page); + oa->attr_id = be32_to_cpu(attr->attr_id); + + /* OSD1: On empty attributes we return a pointer to 2 bytes + * of zeros. This keeps similar behaviour with OSD2. + * (See below) + */ + oa->val_ptr = likely(oa->len) ? attr->attr_val : + (u8 *)&attr->attr_bytes; + } else { + struct osdv2_attributes_list_element *attr = cur_p; + + if (max_bytes < sizeof(*attr)) + return -1; + + oa->len = be16_to_cpu(attr->attr_bytes); + inc = _osd_req_alist_elem_size(or, oa->len); + if (inc > max_bytes) + return -1; + + oa->attr_page = be32_to_cpu(attr->attr_page); + oa->attr_id = be32_to_cpu(attr->attr_id); + + /* OSD2: For convenience, on empty attributes, we return 8 bytes + * of zeros here. This keeps the same behaviour with OSD2r04, + * and is nice with null terminating ASCII fields. + * oa->val_ptr == NULL marks the end-of-list, or error. + */ + oa->val_ptr = likely(oa->len) ? attr->attr_val : attr->reserved; + } + return inc; +} + static unsigned _osd_req_alist_size(struct osd_request *or, void *list_head) { return osd_req_is_ver1(or) ? @@ -282,9 +350,9 @@ _osd_req_sec_params(struct osd_request *or) struct osd_cdb *ocdb = &or->cdb; if (osd_req_is_ver1(or)) - return &ocdb->v1.sec_params; + return (struct osd_security_parameters *)&ocdb->v1.sec_params; else - return &ocdb->v2.sec_params; + return (struct osd_security_parameters *)&ocdb->v2.sec_params; } void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device) @@ -612,9 +680,9 @@ static int _osd_req_list_objects(struct osd_request *or, WARN_ON(or->in.bio); bio = bio_map_kern(q, list, len, or->alloc_flags); - if (!bio) { + if (IS_ERR(bio)) { OSD_ERR("!!! Failed to allocate list_objects BIO\n"); - return -ENOMEM; + return PTR_ERR(bio); } bio->bi_rw &= ~(1 << BIO_RW); @@ -798,7 +866,6 @@ int osd_req_add_set_attr_list(struct osd_request *or, attr_last = or->set_attr.buff + total_bytes; for (; nelem; --nelem) { - struct osd_attributes_list_element *attr; unsigned elem_size = _osd_req_alist_elem_size(or, oa->len); total_bytes += elem_size; @@ -811,11 +878,7 @@ int osd_req_add_set_attr_list(struct osd_request *or, or->set_attr.buff + or->set_attr.total_bytes; } - attr = attr_last; - attr->attr_page = cpu_to_be32(oa->attr_page); - attr->attr_id = cpu_to_be32(oa->attr_id); - attr->attr_bytes = cpu_to_be16(oa->len); - memcpy(attr->attr_val, oa->val_ptr, oa->len); + _osd_req_alist_elem_encode(or, attr_last, oa); attr_last += elem_size; ++oa; @@ -1070,15 +1133,10 @@ int osd_req_decode_get_attr_list(struct osd_request *or, } for (n = 0; (n < *nelem) && (cur_bytes < returned_bytes); ++n) { - struct osd_attributes_list_element *attr = cur_p; - unsigned inc; + int inc = _osd_req_alist_elem_decode(or, cur_p, oa, + returned_bytes - cur_bytes); - oa->len = be16_to_cpu(attr->attr_bytes); - inc = _osd_req_alist_elem_size(or, oa->len); - OSD_DEBUG("oa->len=%d inc=%d cur_bytes=%d\n", - oa->len, inc, cur_bytes); - cur_bytes += inc; - if (cur_bytes > returned_bytes) { + if (inc < 0) { OSD_ERR("BAD FOOD from target. list not valid!" "c=%d r=%d n=%d\n", cur_bytes, returned_bytes, n); @@ -1086,10 +1144,7 @@ int osd_req_decode_get_attr_list(struct osd_request *or, break; } - oa->attr_page = be32_to_cpu(attr->attr_page); - oa->attr_id = be32_to_cpu(attr->attr_id); - oa->val_ptr = attr->attr_val; - + cur_bytes += inc; cur_p += inc; ++oa; } @@ -1159,6 +1214,24 @@ static int _osd_req_finalize_attr_page(struct osd_request *or) return ret; } +static inline void osd_sec_parms_set_out_offset(bool is_v1, + struct osd_security_parameters *sec_parms, osd_cdb_offset offset) +{ + if (is_v1) + sec_parms->v1.data_out_integrity_check_offset = offset; + else + sec_parms->v2.data_out_integrity_check_offset = offset; +} + +static inline void osd_sec_parms_set_in_offset(bool is_v1, + struct osd_security_parameters *sec_parms, osd_cdb_offset offset) +{ + if (is_v1) + sec_parms->v1.data_in_integrity_check_offset = offset; + else + sec_parms->v2.data_in_integrity_check_offset = offset; +} + static int _osd_req_finalize_data_integrity(struct osd_request *or, bool has_in, bool has_out, const u8 *cap_key) { @@ -1182,8 +1255,8 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or, or->out_data_integ.get_attributes_bytes = cpu_to_be64( or->enc_get_attr.total_bytes); - sec_parms->data_out_integrity_check_offset = - osd_req_encode_offset(or, or->out.total_bytes, &pad); + osd_sec_parms_set_out_offset(osd_req_is_ver1(or), sec_parms, + osd_req_encode_offset(or, or->out.total_bytes, &pad)); ret = _req_append_segment(or, pad, &seg, or->out.last_seg, &or->out); @@ -1203,8 +1276,8 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or, }; unsigned pad; - sec_parms->data_in_integrity_check_offset = - osd_req_encode_offset(or, or->in.total_bytes, &pad); + osd_sec_parms_set_in_offset(osd_req_is_ver1(or), sec_parms, + osd_req_encode_offset(or, or->in.total_bytes, &pad)); ret = _req_append_segment(or, pad, &seg, or->in.last_seg, &or->in); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index d1cb64ad1a3f..bb218c8b6e98 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1291,10 +1291,8 @@ static inline int scsi_target_queue_ready(struct Scsi_Host *shost, if (--starget->target_blocked == 0) { SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget, "unblocking target at zero depth\n")); - } else { - blk_plug_device(sdev->request_queue); + } else return 0; - } } if (scsi_target_is_busy(starget)) { diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 3fcb64b91c43..84044233b637 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -50,6 +50,7 @@ #include <linux/string_helpers.h> #include <linux/async.h> #include <asm/uaccess.h> +#include <asm/unaligned.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -1344,12 +1345,8 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, return -EINVAL; } - sector_size = (buffer[8] << 24) | (buffer[9] << 16) | - (buffer[10] << 8) | buffer[11]; - lba = (((u64)buffer[0] << 56) | ((u64)buffer[1] << 48) | - ((u64)buffer[2] << 40) | ((u64)buffer[3] << 32) | - ((u64)buffer[4] << 24) | ((u64)buffer[5] << 16) | - ((u64)buffer[6] << 8) | (u64)buffer[7]); + sector_size = get_unaligned_be32(&buffer[8]); + lba = get_unaligned_be64(&buffer[0]); sd_read_protection_type(sdkp, buffer); @@ -1400,10 +1397,8 @@ static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, return -EINVAL; } - sector_size = (buffer[4] << 24) | (buffer[5] << 16) | - (buffer[6] << 8) | buffer[7]; - lba = (buffer[0] << 24) | (buffer[1] << 16) | - (buffer[2] << 8) | buffer[3]; + sector_size = get_unaligned_be32(&buffer[4]); + lba = get_unaligned_be32(&buffer[0]); if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) { sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 82312df9b0bf..e1716f14cd47 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -179,7 +179,7 @@ typedef struct sg_device { /* holds the state of each scsi generic device */ /* tasklet or soft irq callback */ static void sg_rq_end_io(struct request *rq, int uptodate); static int sg_start_req(Sg_request *srp, unsigned char *cmd); -static void sg_finish_rem_req(Sg_request * srp); +static int sg_finish_rem_req(Sg_request * srp); static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size); static ssize_t sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp); @@ -518,7 +518,7 @@ sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp) goto err_out; } err_out: - sg_finish_rem_req(srp); + err = sg_finish_rem_req(srp); return (0 == err) ? count : err; } @@ -1696,9 +1696,10 @@ static int sg_start_req(Sg_request *srp, unsigned char *cmd) return res; } -static void -sg_finish_rem_req(Sg_request * srp) +static int sg_finish_rem_req(Sg_request * srp) { + int ret = 0; + Sg_fd *sfp = srp->parentfp; Sg_scatter_hold *req_schp = &srp->data; @@ -1710,12 +1711,14 @@ sg_finish_rem_req(Sg_request * srp) if (srp->rq) { if (srp->bio) - blk_rq_unmap_user(srp->bio); + ret = blk_rq_unmap_user(srp->bio); blk_put_request(srp->rq); } sg_remove_request(sfp, srp); + + return ret; } static int diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index d92ff512d213..291236e6e435 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -309,6 +309,11 @@ int sr_drive_status(struct cdrom_device_info *cdi, int slot) if (0 == sr_test_unit_ready(cd->device, &sshdr)) return CDS_DISC_OK; + /* SK/ASC/ASCQ of 2/4/1 means "unit is becoming ready" */ + if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY + && sshdr.asc == 0x04 && sshdr.ascq == 0x01) + return CDS_DRIVE_NOT_READY; + if (!cdrom_get_media_event(cdi, &med)) { if (med.media_present) return CDS_DISC_OK; diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 7ba7d70f04d6..7be52fe288eb 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -23,16 +23,18 @@ static char *serial_version = "$Revision: 1.25 $"; #include <linux/mm.h> #include <linux/slab.h> #include <linux/init.h> -#include <asm/uaccess.h> #include <linux/kernel.h> #include <linux/mutex.h> #include <linux/bitops.h> +#include <linux/seq_file.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/uaccess.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/irq.h> #include <asm/dma.h> #include <asm/system.h> -#include <linux/delay.h> #include <arch/svinto.h> @@ -456,7 +458,6 @@ static struct e100_serial rs_table[] = { #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) -static struct ktermios *serial_termios[NR_PORTS]; #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER static struct fast_timer fast_timers[NR_PORTS]; #endif @@ -4257,151 +4258,132 @@ rs_open(struct tty_struct *tty, struct file * filp) return 0; } +#ifdef CONFIG_PROC_FS /* * /proc fs routines.... */ -static int line_info(char *buf, struct e100_serial *info) +static void seq_line_info(struct seq_file *m, struct e100_serial *info) { - char stat_buf[30]; - int ret; unsigned long tmp; - ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d", - info->line, (unsigned long)info->ioport, info->irq); + seq_printf(m, "%d: uart:E100 port:%lX irq:%d", + info->line, (unsigned long)info->ioport, info->irq); if (!info->ioport || (info->type == PORT_UNKNOWN)) { - ret += sprintf(buf+ret, "\n"); - return ret; + seq_printf(m, "\n"); + return; } - stat_buf[0] = 0; - stat_buf[1] = 0; - if (!E100_RTS_GET(info)) - strcat(stat_buf, "|RTS"); - if (!E100_CTS_GET(info)) - strcat(stat_buf, "|CTS"); - if (!E100_DTR_GET(info)) - strcat(stat_buf, "|DTR"); - if (!E100_DSR_GET(info)) - strcat(stat_buf, "|DSR"); - if (!E100_CD_GET(info)) - strcat(stat_buf, "|CD"); - if (!E100_RI_GET(info)) - strcat(stat_buf, "|RI"); - - ret += sprintf(buf+ret, " baud:%d", info->baud); - - ret += sprintf(buf+ret, " tx:%lu rx:%lu", + seq_printf(m, " baud:%d", info->baud); + seq_printf(m, " tx:%lu rx:%lu", (unsigned long)info->icount.tx, (unsigned long)info->icount.rx); tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); - if (tmp) { - ret += sprintf(buf+ret, " tx_pend:%lu/%lu", - (unsigned long)tmp, - (unsigned long)SERIAL_XMIT_SIZE); - } + if (tmp) + seq_printf(m, " tx_pend:%lu/%lu", + (unsigned long)tmp, + (unsigned long)SERIAL_XMIT_SIZE); - ret += sprintf(buf+ret, " rx_pend:%lu/%lu", - (unsigned long)info->recv_cnt, - (unsigned long)info->max_recv_cnt); + seq_printf(m, " rx_pend:%lu/%lu", + (unsigned long)info->recv_cnt, + (unsigned long)info->max_recv_cnt); #if 1 if (info->port.tty) { - if (info->port.tty->stopped) - ret += sprintf(buf+ret, " stopped:%i", - (int)info->port.tty->stopped); + seq_printf(m, " stopped:%i", + (int)info->port.tty->stopped); if (info->port.tty->hw_stopped) - ret += sprintf(buf+ret, " hw_stopped:%i", - (int)info->port.tty->hw_stopped); + seq_printf(m, " hw_stopped:%i", + (int)info->port.tty->hw_stopped); } { unsigned char rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) - ret += sprintf(buf+ret, " xoff_detect:1"); + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect)) + seq_printf(m, " xoff_detect:1"); } #endif - - - if (info->icount.frame) - ret += sprintf(buf+ret, " fe:%lu", - (unsigned long)info->icount.frame); + seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame); if (info->icount.parity) - ret += sprintf(buf+ret, " pe:%lu", - (unsigned long)info->icount.parity); + seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity); if (info->icount.brk) - ret += sprintf(buf+ret, " brk:%lu", - (unsigned long)info->icount.brk); + seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk); if (info->icount.overrun) - ret += sprintf(buf+ret, " oe:%lu", - (unsigned long)info->icount.overrun); + seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun); /* * Last thing is the RS-232 status lines */ - ret += sprintf(buf+ret, " %s\n", stat_buf+1); - return ret; + if (!E100_RTS_GET(info)) + seq_puts(m, "|RTS"); + if (!E100_CTS_GET(info)) + seq_puts(m, "|CTS"); + if (!E100_DTR_GET(info)) + seq_puts(m, "|DTR"); + if (!E100_DSR_GET(info)) + seq_puts(m, "|DSR"); + if (!E100_CD_GET(info)) + seq_puts(m, "|CD"); + if (!E100_RI_GET(info)) + seq_puts(m, "|RI"); + seq_puts(m, "\n"); } -int rs_read_proc(char *page, char **start, off_t off, int count, - int *eof, void *data) + +static int crisv10_proc_show(struct seq_file *m, void *v) { - int i, len = 0, l; - off_t begin = 0; + int i; - len += sprintf(page, "serinfo:1.0 driver:%s\n", - serial_version); - for (i = 0; i < NR_PORTS && len < 4000; i++) { + seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); + + for (i = 0; i < NR_PORTS; i++) { if (!rs_table[i].enabled) continue; - l = line_info(page + len, &rs_table[i]); - len += l; - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } + seq_line_info(m, &rs_table[i]); } #ifdef DEBUG_LOG_INCLUDED for (i = 0; i < debug_log_pos; i++) { - len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data)); - len += sprintf(page + len, debug_log[i].string, debug_log[i].value); - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } + seq_printf(m, "%-4i %lu.%lu ", + i, debug_log[i].time, + timer_data_to_ns(debug_log[i].timer_data)); + seq_printf(m, debug_log[i].string, debug_log[i].value); } - len += sprintf(page + len, "debug_log %i/%i %li bytes\n", - i, DEBUG_LOG_SIZE, begin+len); + seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE); debug_log_pos = 0; #endif + return 0; +} - *eof = 1; -done: - if (off >= len+begin) - return 0; - *start = page + (off-begin); - return ((count < begin+len-off) ? count : begin+len-off); +static int crisv10_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, crisv10_proc_show, NULL); } +static const struct file_operations crisv10_proc_fops = { + .owner = THIS_MODULE, + .open = crisv10_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + + /* Finally, routines used to initialize the serial driver. */ -static void -show_serial_version(void) +static void show_serial_version(void) { printk(KERN_INFO - "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n", + "ETRAX 100LX serial-driver %s, " + "(c) 2000-2004 Axis Communications AB\r\n", &serial_version[11]); /* "$Revision: x.yy" */ } @@ -4425,13 +4407,14 @@ static const struct tty_operations rs_ops = { .break_ctl = rs_break, .send_xchar = rs_send_xchar, .wait_until_sent = rs_wait_until_sent, - .read_proc = rs_read_proc, .tiocmget = rs_tiocmget, - .tiocmset = rs_tiocmset + .tiocmset = rs_tiocmset, +#ifdef CONFIG_PROC_FS + .proc_fops = &crisv10_proc_fops, +#endif }; -static int __init -rs_init(void) +static int __init rs_init(void) { int i; struct e100_serial *info; diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h index 8871aaa3dba6..c0a3e2734e24 100644 --- a/drivers/serial/jsm/jsm.h +++ b/drivers/serial/jsm/jsm.h @@ -130,8 +130,6 @@ struct jsm_board struct pci_dev *pci_dev; u32 maxports; /* MAX ports this board can handle */ - spinlock_t bd_lock; /* Used to protect board */ - spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and * the interrupt routine from each other. */ diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index d2d32a198629..b3604aa322a4 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -88,7 +88,6 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device else brd->maxports = 2; - spin_lock_init(&brd->bd_lock); spin_lock_init(&brd->bd_intr_lock); /* store which revision we have */ diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c index 06936d13393f..3e3785233682 100644 --- a/drivers/serial/s3c6400.c +++ b/drivers/serial/s3c6400.c @@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c6400_uart_inf = { .name = "Samsung S3C6400 UART", .type = PORT_S3C6400, .fifosize = 64, + .has_divslot = 1, .rx_fifomask = S3C2440_UFSTAT_RXMASK, .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, .rx_fifofull = S3C2440_UFSTAT_RXFULL, diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index e06686ae858b..93b5d75db126 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -508,6 +508,7 @@ s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) struct baud_calc { struct s3c24xx_uart_clksrc *clksrc; unsigned int calc; + unsigned int divslot; unsigned int quot; struct clk *src; }; @@ -517,6 +518,7 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc, struct s3c24xx_uart_clksrc *clksrc, unsigned int baud) { + struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned long rate; calc->src = clk_get(port->dev, clksrc->name); @@ -527,8 +529,24 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc, rate /= clksrc->divisor; calc->clksrc = clksrc; - calc->quot = (rate + (8 * baud)) / (16 * baud); - calc->calc = (rate / (calc->quot * 16)); + + if (ourport->info->has_divslot) { + unsigned long div = rate / baud; + + /* The UDIVSLOT register on the newer UARTs allows us to + * get a divisor adjustment of 1/16th on the baud clock. + * + * We don't keep the UDIVSLOT value (the 16ths we calculated + * by not multiplying the baud by 16) as it is easy enough + * to recalculate. + */ + + calc->quot = div / 16; + calc->calc = rate / div; + } else { + calc->quot = (rate + (8 * baud)) / (16 * baud); + calc->calc = (rate / (calc->quot * 16)); + } calc->quot--; return 1; @@ -611,6 +629,30 @@ static unsigned int s3c24xx_serial_getclk(struct uart_port *port, return best->quot; } +/* udivslot_table[] + * + * This table takes the fractional value of the baud divisor and gives + * the recommended setting for the UDIVSLOT register. + */ +static u16 udivslot_table[16] = { + [0] = 0x0000, + [1] = 0x0080, + [2] = 0x0808, + [3] = 0x0888, + [4] = 0x2222, + [5] = 0x4924, + [6] = 0x4A52, + [7] = 0x54AA, + [8] = 0x5555, + [9] = 0xD555, + [10] = 0xD5D5, + [11] = 0xDDD5, + [12] = 0xDDDD, + [13] = 0xDFDD, + [14] = 0xDFDF, + [15] = 0xFFDF, +}; + static void s3c24xx_serial_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -623,6 +665,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, unsigned int baud, quot; unsigned int ulcon; unsigned int umcon; + unsigned int udivslot = 0; /* * We don't support modem control lines. @@ -644,6 +687,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, /* check to see if we need to change clock source */ if (ourport->clksrc != clksrc || ourport->baudclk != clk) { + dbg("selecting clock %p\n", clk); s3c24xx_serial_setsource(port, clksrc); if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { @@ -658,6 +702,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; } + if (ourport->info->has_divslot) { + unsigned int div = ourport->baudclk_rate / baud; + + udivslot = udivslot_table[div & 15]; + dbg("udivslot = %04x (div %d)\n", udivslot, div & 15); + } + switch (termios->c_cflag & CSIZE) { case CS5: dbg("config: 5bits/char\n"); @@ -697,12 +748,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, spin_lock_irqsave(&port->lock, flags); - dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot); + dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n", + ulcon, quot, udivslot); wr_regl(port, S3C2410_ULCON, ulcon); wr_regl(port, S3C2410_UBRDIV, quot); wr_regl(port, S3C2410_UMCON, umcon); + if (ourport->info->has_divslot) + wr_regl(port, S3C2443_DIVSLOT, udivslot); + dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", rd_regl(port, S3C2410_ULCON), rd_regl(port, S3C2410_UCON), diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h index 571d6b90d206..7afb94843a08 100644 --- a/drivers/serial/samsung.h +++ b/drivers/serial/samsung.h @@ -21,6 +21,10 @@ struct s3c24xx_uart_info { unsigned long tx_fifoshift; unsigned long tx_fifofull; + /* uart port features */ + + unsigned int has_divslot:1; + /* clock source control */ int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 0dbd6c68d76b..d8d0be5151e3 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -56,7 +56,6 @@ obj-$(CONFIG_FB_CT65550) += chipsfb.o obj-$(CONFIG_FB_IMSTT) += imsttfb.o obj-$(CONFIG_FB_FM2) += fm2fb.o obj-$(CONFIG_FB_VT8623) += vt8623fb.o -obj-$(CONFIG_FB_CYBLA) += cyblafb.o obj-$(CONFIG_FB_TRIDENT) += tridentfb.o obj-$(CONFIG_FB_LE80578) += vermilion/ obj-$(CONFIG_FB_S3) += s3fb.o diff --git a/drivers/video/cfbfillrect.c b/drivers/video/cfbfillrect.c index 64b35766b2a2..ba9f58b2a5e8 100644 --- a/drivers/video/cfbfillrect.c +++ b/drivers/video/cfbfillrect.c @@ -9,10 +9,6 @@ * * NOTES: * - * The code for depths like 24 that don't have integer number of pixels per - * long is broken and needs to be fixed. For now I turned these types of - * mode off. - * * Also need to add code to deal with cards endians that are different than * the native cpu endians. I also need to deal with MSB position in the word. * @@ -139,7 +135,7 @@ bitfill_unaligned(struct fb_info *p, unsigned long __iomem *dst, int dst_idx, // Trailing bits if (last) - FB_WRITEL(comp(pat, FB_READL(dst), first), dst); + FB_WRITEL(comp(pat, FB_READL(dst), last), dst); } } @@ -281,7 +277,7 @@ bitfill_unaligned_rev(struct fb_info *p, unsigned long __iomem *dst, void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect) { - unsigned long pat, fg; + unsigned long pat, pat2, fg; unsigned long width = rect->width, height = rect->height; int bits = BITS_PER_LONG, bytes = bits >> 3; u32 bpp = p->var.bits_per_pixel; @@ -297,7 +293,7 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect) else fg = rect->color; - pat = pixel_to_pat( bpp, fg); + pat = pixel_to_pat(bpp, fg); dst = (unsigned long __iomem *)((unsigned long)p->screen_base & ~(bytes-1)); dst_idx = ((unsigned long)p->screen_base & (bytes - 1))*8; @@ -333,17 +329,16 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect) dst_idx += p->fix.line_length*8; } } else { - int right; - int r; - int rot = (left-dst_idx) % bpp; + int right, r; void (*fill_op)(struct fb_info *p, unsigned long __iomem *dst, int dst_idx, unsigned long pat, int left, int right, unsigned n, int bits) = NULL; - - /* rotate pattern to correct start position */ - pat = pat << rot | pat >> (bpp-rot); - - right = bpp-left; +#ifdef __LITTLE_ENDIAN + right = left; + left = bpp - right; +#else + right = bpp - left; +#endif switch (rect->rop) { case ROP_XOR: fill_op = bitfill_unaligned_rev; @@ -352,17 +347,18 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect) fill_op = bitfill_unaligned; break; default: - printk( KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n"); + printk(KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n"); fill_op = bitfill_unaligned; break; } while (height--) { - dst += dst_idx >> (ffs(bits) - 1); + dst += dst_idx / bits; dst_idx &= (bits - 1); - fill_op(p, dst, dst_idx, pat, left, right, + r = dst_idx % bpp; + /* rotate pattern to the correct start position */ + pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp)); + fill_op(p, dst, dst_idx, pat2, left, right, width*bpp, bits); - r = (p->fix.line_length*8) % bpp; - pat = pat << (bpp-r) | pat >> r; dst_idx += p->fix.line_length*8; } } diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index d012edda6d11..38e86b84dce0 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -1282,7 +1282,7 @@ static int vgacon_font_get(struct vc_data *c, struct console_font *font) font->charcount = vga_512_chars ? 512 : 256; if (!font->data) return 0; - return vgacon_do_font_op(&state, font->data, 0, 0); + return vgacon_do_font_op(&state, font->data, 0, vga_512_chars); } #else diff --git a/drivers/video/fb_draw.h b/drivers/video/fb_draw.h index 1db622192bde..04c01faaf772 100644 --- a/drivers/video/fb_draw.h +++ b/drivers/video/fb_draw.h @@ -33,11 +33,11 @@ pixel_to_pat( u32 bpp, u32 pixel) case 8: return 0x0101010101010101ul*pixel; case 12: - return 0x0001001001001001ul*pixel; + return 0x1001001001001001ul*pixel; case 16: return 0x0001000100010001ul*pixel; case 24: - return 0x0000000001000001ul*pixel; + return 0x0001000001000001ul*pixel; case 32: return 0x0000000100000001ul*pixel; default: @@ -58,11 +58,11 @@ pixel_to_pat( u32 bpp, u32 pixel) case 8: return 0x01010101ul*pixel; case 12: - return 0x00001001ul*pixel; + return 0x01001001ul*pixel; case 16: return 0x00010001ul*pixel; case 24: - return 0x00000001ul*pixel; + return 0x01000001ul*pixel; case 32: return 0x00000001ul*pixel; default: @@ -167,4 +167,17 @@ static inline unsigned long fb_rev_pixels_in_long(unsigned long val, #endif /* CONFIG_FB_CFB_REV_PIXELS_IN_BYTE */ +#define cpu_to_le_long _cpu_to_le_long(BITS_PER_LONG) +#define _cpu_to_le_long(x) __cpu_to_le_long(x) +#define __cpu_to_le_long(x) cpu_to_le##x + +#define le_long_to_cpu _le_long_to_cpu(BITS_PER_LONG) +#define _le_long_to_cpu(x) __le_long_to_cpu(x) +#define __le_long_to_cpu(x) le##x##_to_cpu + +static inline unsigned long rolx(unsigned long word, unsigned int shift, unsigned int x) +{ + return (word << shift) | (word >> (x - shift)); +} + #endif /* FB_DRAW_H */ diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 21b3692092f2..9894de1c9b9f 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -1152,11 +1152,11 @@ static struct fb_ops mx3fb_ops = { */ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) { - struct mx3fb_data *drv_data = platform_get_drvdata(pdev); - struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + struct mx3fb_data *mx3fb = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; acquire_console_sem(); - fb_set_suspend(drv_data->fbi, 1); + fb_set_suspend(mx3fb->fbi, 1); release_console_sem(); if (mx3_fbi->blank == FB_BLANK_UNBLANK) { @@ -1172,16 +1172,16 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) */ static int mx3fb_resume(struct platform_device *pdev) { - struct mx3fb_data *drv_data = platform_get_drvdata(pdev); - struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + struct mx3fb_data *mx3fb = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; if (mx3_fbi->blank == FB_BLANK_UNBLANK) { sdc_enable_channel(mx3_fbi); - sdc_set_brightness(mx3fb, drv_data->backlight_level); + sdc_set_brightness(mx3fb, mx3fb->backlight_level); } acquire_console_sem(); - fb_set_suspend(drv_data->fbi, 0); + fb_set_suspend(mx3fb->fbi, 0); release_console_sem(); return 0; diff --git a/drivers/video/sysfillrect.c b/drivers/video/sysfillrect.c index f94d6b6e29ee..33ee3d34f9d2 100644 --- a/drivers/video/sysfillrect.c +++ b/drivers/video/sysfillrect.c @@ -124,7 +124,7 @@ bitfill_unaligned(struct fb_info *p, unsigned long *dst, int dst_idx, /* Trailing bits */ if (last) - *dst = comp(pat, *dst, first); + *dst = comp(pat, *dst, last); } } @@ -242,7 +242,7 @@ bitfill_unaligned_rev(struct fb_info *p, unsigned long *dst, int dst_idx, void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect) { - unsigned long pat, fg; + unsigned long pat, pat2, fg; unsigned long width = rect->width, height = rect->height; int bits = BITS_PER_LONG, bytes = bits >> 3; u32 bpp = p->var.bits_per_pixel; @@ -292,17 +292,16 @@ void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect) dst_idx += p->fix.line_length*8; } } else { - int right; - int r; - int rot = (left-dst_idx) % bpp; + int right, r; void (*fill_op)(struct fb_info *p, unsigned long *dst, int dst_idx, unsigned long pat, int left, int right, unsigned n, int bits) = NULL; - - /* rotate pattern to correct start position */ - pat = pat << rot | pat >> (bpp-rot); - - right = bpp-left; +#ifdef __LITTLE_ENDIAN + right = left; + left = bpp - right; +#else + right = bpp - left; +#endif switch (rect->rop) { case ROP_XOR: fill_op = bitfill_unaligned_rev; @@ -311,18 +310,19 @@ void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect) fill_op = bitfill_unaligned; break; default: - printk(KERN_ERR "cfb_fillrect(): unknown rop, " + printk(KERN_ERR "sys_fillrect(): unknown rop, " "defaulting to ROP_COPY\n"); fill_op = bitfill_unaligned; break; } while (height--) { - dst += dst_idx >> (ffs(bits) - 1); + dst += dst_idx / bits; dst_idx &= (bits - 1); - fill_op(p, dst, dst_idx, pat, left, right, + r = dst_idx % bpp; + /* rotate pattern to the correct start position */ + pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp)); + fill_op(p, dst, dst_idx, pat2, left, right, width*bpp, bits); - r = (p->fix.line_length*8) % bpp; - pat = pat << (bpp-r) | pat >> r; dst_idx += p->fix.line_length*8; } } diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index efa4b363ce72..f5bbd9e83416 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -513,7 +513,8 @@ static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr char *buf) { return sprintf(buf, "%llu\n", - (u64)balloon_stats.target_pages << PAGE_SHIFT); + (unsigned long long)balloon_stats.target_pages + << PAGE_SHIFT); } static ssize_t store_target(struct sys_device *dev, diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c index 75f7ddacf7d6..3077d8f16523 100644 --- a/fs/autofs4/expire.c +++ b/fs/autofs4/expire.c @@ -70,8 +70,10 @@ static int autofs4_mount_busy(struct vfsmount *mnt, struct dentry *dentry) * Otherwise it's an offset mount and we need to check * if we can umount its mount, if there is one. */ - if (!d_mountpoint(dentry)) + if (!d_mountpoint(dentry)) { + status = 0; goto done; + } } /* Update the expiry counter if fs is busy */ diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index 70cfc4b84ae0..fdb66faa24f1 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -1388,7 +1388,7 @@ static void fill_prstatus(struct elf_prstatus *prstatus, prstatus->pr_sigpend = p->pending.signal.sig[0]; prstatus->pr_sighold = p->blocked.sig[0]; prstatus->pr_pid = task_pid_vnr(p); - prstatus->pr_ppid = task_pid_vnr(p->parent); + prstatus->pr_ppid = task_pid_vnr(p->real_parent); prstatus->pr_pgrp = task_pgrp_vnr(p); prstatus->pr_sid = task_session_vnr(p); if (thread_group_leader(p)) { @@ -1433,7 +1433,7 @@ static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p, psinfo->pr_psargs[len] = 0; psinfo->pr_pid = task_pid_vnr(p); - psinfo->pr_ppid = task_pid_vnr(p->parent); + psinfo->pr_ppid = task_pid_vnr(p->real_parent); psinfo->pr_pgrp = task_pgrp_vnr(p); psinfo->pr_sid = task_session_vnr(p); diff --git a/fs/buffer.c b/fs/buffer.c index b3e5be7514f5..aed297739eb0 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -2397,7 +2397,8 @@ block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf, if ((page->mapping != inode->i_mapping) || (page_offset(page) > size)) { /* page got truncated out from underneath us */ - goto out_unlock; + unlock_page(page); + goto out; } /* page is wholly or partially inside EOF */ @@ -2411,14 +2412,15 @@ block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf, ret = block_commit_write(page, 0, end); if (unlikely(ret)) { + unlock_page(page); if (ret == -ENOMEM) ret = VM_FAULT_OOM; else /* -ENOSPC, -EIO, etc */ ret = VM_FAULT_SIGBUS; - } + } else + ret = VM_FAULT_LOCKED; -out_unlock: - unlock_page(page); +out: return ret; } diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c index 932a92b31483..c8afa6b1d91d 100644 --- a/fs/configfs/symlink.c +++ b/fs/configfs/symlink.c @@ -135,7 +135,7 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna struct path path; struct configfs_dirent *sd; struct config_item *parent_item; - struct config_item *target_item; + struct config_item *target_item = NULL; struct config_item_type *type; ret = -EPERM; /* What lack-of-symlink returns */ diff --git a/fs/exec.c b/fs/exec.c index a3a8ce83940f..639177b0eeac 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -69,17 +69,18 @@ int suid_dumpable = 0; static LIST_HEAD(formats); static DEFINE_RWLOCK(binfmt_lock); -int register_binfmt(struct linux_binfmt * fmt) +int __register_binfmt(struct linux_binfmt * fmt, int insert) { if (!fmt) return -EINVAL; write_lock(&binfmt_lock); - list_add(&fmt->lh, &formats); + insert ? list_add(&fmt->lh, &formats) : + list_add_tail(&fmt->lh, &formats); write_unlock(&binfmt_lock); return 0; } -EXPORT_SYMBOL(register_binfmt); +EXPORT_SYMBOL(__register_binfmt); void unregister_binfmt(struct linux_binfmt * fmt) { diff --git a/fs/ioctl.c b/fs/ioctl.c index ac2d47e43926..82d9c42b8bac 100644 --- a/fs/ioctl.c +++ b/fs/ioctl.c @@ -258,7 +258,7 @@ int __generic_block_fiemap(struct inode *inode, long long length = 0, map_len = 0; u64 logical = 0, phys = 0, size = 0; u32 flags = FIEMAP_EXTENT_MERGED; - int ret = 0; + int ret = 0, past_eof = 0, whole_file = 0; if ((ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC))) return ret; @@ -266,6 +266,9 @@ int __generic_block_fiemap(struct inode *inode, start_blk = logical_to_blk(inode, start); length = (long long)min_t(u64, len, i_size_read(inode)); + if (length < len) + whole_file = 1; + map_len = length; do { @@ -282,11 +285,26 @@ int __generic_block_fiemap(struct inode *inode, /* HOLE */ if (!buffer_mapped(&tmp)) { + length -= blk_to_logical(inode, 1); + start_blk++; + + /* + * we want to handle the case where there is an + * allocated block at the front of the file, and then + * nothing but holes up to the end of the file properly, + * to make sure that extent at the front gets properly + * marked with FIEMAP_EXTENT_LAST + */ + if (!past_eof && + blk_to_logical(inode, start_blk) >= + blk_to_logical(inode, 0)+i_size_read(inode)) + past_eof = 1; + /* * first hole after going past the EOF, this is our * last extent */ - if (length <= 0) { + if (past_eof && size) { flags = FIEMAP_EXTENT_MERGED|FIEMAP_EXTENT_LAST; ret = fiemap_fill_next_extent(fieinfo, logical, phys, size, @@ -294,15 +312,37 @@ int __generic_block_fiemap(struct inode *inode, break; } - length -= blk_to_logical(inode, 1); - /* if we have holes up to/past EOF then we're done */ - if (length <= 0) + if (length <= 0 || past_eof) break; - - start_blk++; } else { - if (length <= 0 && size) { + /* + * we have gone over the length of what we wanted to + * map, and it wasn't the entire file, so add the extent + * we got last time and exit. + * + * This is for the case where say we want to map all the + * way up to the second to the last block in a file, but + * the last block is a hole, making the second to last + * block FIEMAP_EXTENT_LAST. In this case we want to + * see if there is a hole after the second to last block + * so we can mark it properly. If we found data after + * we exceeded the length we were requesting, then we + * are good to go, just add the extent to the fieinfo + * and break + */ + if (length <= 0 && !whole_file) { + ret = fiemap_fill_next_extent(fieinfo, logical, + phys, size, + flags); + break; + } + + /* + * if size != 0 then we know we already have an extent + * to add, so add it. + */ + if (size) { ret = fiemap_fill_next_extent(fieinfo, logical, phys, size, flags); @@ -319,19 +359,14 @@ int __generic_block_fiemap(struct inode *inode, start_blk += logical_to_blk(inode, size); /* - * if we are past the EOF we need to loop again to see - * if there is a hole so we can mark this extent as the - * last one, and if not keep mapping things until we - * find a hole, or we run out of slots in the extent - * array + * If we are past the EOF, then we need to make sure as + * soon as we find a hole that the last extent we found + * is marked with FIEMAP_EXTENT_LAST */ - if (length <= 0) - continue; - - ret = fiemap_fill_next_extent(fieinfo, logical, phys, - size, flags); - if (ret) - break; + if (!past_eof && + logical+size >= + blk_to_logical(inode, 0)+i_size_read(inode)) + past_eof = 1; } cond_resched(); } while (1); diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 5a97bcfe03e5..ec7e27d00bc6 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -517,10 +517,10 @@ static int nfs_vm_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) ret = nfs_updatepage(filp, page, 0, pagelen); out_unlock: + if (!ret) + return VM_FAULT_LOCKED; unlock_page(page); - if (ret) - ret = VM_FAULT_SIGBUS; - return ret; + return VM_FAULT_SIGBUS; } static struct vm_operations_struct nfs_file_vm_ops = { diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index bed766e435b5..1634319e2404 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -220,7 +220,7 @@ static struct inotify_kernel_event * kernel_event(s32 wd, u32 mask, u32 cookie, rem = 0; } - kevent->name = kmalloc(len + rem, GFP_KERNEL); + kevent->name = kmalloc(len + rem, GFP_NOFS); if (unlikely(!kevent->name)) { kmem_cache_free(event_cachep, kevent); return NULL; diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c index 7d604480557a..b574431a031d 100644 --- a/fs/ocfs2/dcache.c +++ b/fs/ocfs2/dcache.c @@ -290,6 +290,21 @@ out_attach: else mlog_errno(ret); + /* + * In case of error, manually free the allocation and do the iput(). + * We need to do this because error here means no d_instantiate(), + * which means iput() will not be called during dput(dentry). + */ + if (ret < 0 && !alias) { + ocfs2_lock_res_free(&dl->dl_lockres); + BUG_ON(dl->dl_count != 1); + spin_lock(&dentry_attach_lock); + dentry->d_fsdata = NULL; + spin_unlock(&dentry_attach_lock); + kfree(dl); + iput(inode); + } + dput(alias); return ret; diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index e71160cda110..c5752305627c 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -2697,7 +2697,7 @@ static int ocfs2_dx_dir_index_block(struct inode *dir, u32 *num_dx_entries, struct buffer_head *dirent_bh) { - int ret, namelen, i; + int ret = 0, namelen, i; char *de_buf, *limit; struct ocfs2_dir_entry *de; struct buffer_head *dx_leaf_bh; @@ -2934,7 +2934,7 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh, */ BUG_ON(alloc > 2); - ret = ocfs2_reserve_clusters(osb, alloc, &data_ac); + ret = ocfs2_reserve_clusters(osb, alloc + dx_alloc, &data_ac); if (ret) { mlog_errno(ret); goto out; diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c index de3da8eb558c..15713cbb865c 100644 --- a/fs/ocfs2/export.c +++ b/fs/ocfs2/export.c @@ -100,7 +100,8 @@ static struct dentry *ocfs2_get_dentry(struct super_block *sb, /* If the inode allocator bit is clear, this inode must be stale */ if (!set) { - mlog(0, "inode %llu suballoc bit is clear\n", blkno); + mlog(0, "inode %llu suballoc bit is clear\n", + (unsigned long long)blkno); status = -ESTALE; goto unlock_nfs_sync; } @@ -114,7 +115,7 @@ check_err: if (status < 0) { if (status == -ESTALE) { mlog(0, "stale inode ino: %llu generation: %u\n", - blkno, handle->ih_generation); + (unsigned long long)blkno, handle->ih_generation); } result = ERR_PTR(status); goto bail; @@ -129,8 +130,8 @@ check_err: check_gen: if (handle->ih_generation != inode->i_generation) { iput(inode); - mlog(0, "stale inode ino: %llu generation: %u\n", blkno, - handle->ih_generation); + mlog(0, "stale inode ino: %llu generation: %u\n", + (unsigned long long)blkno, handle->ih_generation); result = ERR_PTR(-ESTALE); goto bail; } diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h index 619dd7f6c053..eb7b76331eb7 100644 --- a/fs/ocfs2/journal.h +++ b/fs/ocfs2/journal.h @@ -437,8 +437,9 @@ static inline int ocfs2_unlink_credits(struct super_block *sb) } /* dinode + orphan dir dinode + inode alloc dinode + orphan dir entry + - * inode alloc group descriptor + orphan dir index leaf */ -#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 3) + * inode alloc group descriptor + orphan dir index root + + * orphan dir index leaf */ +#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 4) /* dinode update, old dir dinode update, new dir dinode update, old * dir dir entry, new dir dir entry, dir entry update for renaming diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index 2220f93f668b..33464c6b60a2 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -1025,10 +1025,8 @@ static int ocfs2_rename(struct inode *old_dir, struct inode *orphan_dir = NULL; struct ocfs2_dinode *newfe = NULL; char orphan_name[OCFS2_ORPHAN_NAMELEN + 1]; - struct buffer_head *orphan_entry_bh = NULL; struct buffer_head *newfe_bh = NULL; struct buffer_head *old_inode_bh = NULL; - struct buffer_head *insert_entry_bh = NULL; struct ocfs2_super *osb = NULL; u64 newfe_blkno, old_de_ino; handle_t *handle = NULL; @@ -1455,8 +1453,6 @@ bail: brelse(old_inode_bh); brelse(old_dir_bh); brelse(new_dir_bh); - brelse(orphan_entry_bh); - brelse(insert_entry_bh); mlog_exit(status); diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c index b4ca5911caaf..8439f6b324b9 100644 --- a/fs/ocfs2/suballoc.c +++ b/fs/ocfs2/suballoc.c @@ -2197,26 +2197,29 @@ static int ocfs2_get_suballoc_slot_bit(struct ocfs2_super *osb, u64 blkno, struct buffer_head *inode_bh = NULL; struct ocfs2_dinode *inode_fe; - mlog_entry("blkno: %llu\n", blkno); + mlog_entry("blkno: %llu\n", (unsigned long long)blkno); /* dirty read disk */ status = ocfs2_read_blocks_sync(osb, blkno, 1, &inode_bh); if (status < 0) { - mlog(ML_ERROR, "read block %llu failed %d\n", blkno, status); + mlog(ML_ERROR, "read block %llu failed %d\n", + (unsigned long long)blkno, status); goto bail; } inode_fe = (struct ocfs2_dinode *) inode_bh->b_data; if (!OCFS2_IS_VALID_DINODE(inode_fe)) { - mlog(ML_ERROR, "invalid inode %llu requested\n", blkno); + mlog(ML_ERROR, "invalid inode %llu requested\n", + (unsigned long long)blkno); status = -EINVAL; goto bail; } - if (le16_to_cpu(inode_fe->i_suballoc_slot) != OCFS2_INVALID_SLOT && + if (le16_to_cpu(inode_fe->i_suballoc_slot) != (u16)OCFS2_INVALID_SLOT && (u32)le16_to_cpu(inode_fe->i_suballoc_slot) > osb->max_slots - 1) { mlog(ML_ERROR, "inode %llu has invalid suballoc slot %u\n", - blkno, (u32)le16_to_cpu(inode_fe->i_suballoc_slot)); + (unsigned long long)blkno, + (u32)le16_to_cpu(inode_fe->i_suballoc_slot)); status = -EINVAL; goto bail; } @@ -2251,7 +2254,8 @@ static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb, u64 bg_blkno; int status; - mlog_entry("blkno: %llu bit: %u\n", blkno, (unsigned int)bit); + mlog_entry("blkno: %llu bit: %u\n", (unsigned long long)blkno, + (unsigned int)bit); alloc_fe = (struct ocfs2_dinode *)alloc_bh->b_data; if ((bit + 1) > ocfs2_bits_per_group(&alloc_fe->id2.i_chain)) { @@ -2266,7 +2270,8 @@ static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb, status = ocfs2_read_group_descriptor(suballoc, alloc_fe, bg_blkno, &group_bh); if (status < 0) { - mlog(ML_ERROR, "read group %llu failed %d\n", bg_blkno, status); + mlog(ML_ERROR, "read group %llu failed %d\n", + (unsigned long long)bg_blkno, status); goto bail; } @@ -2300,7 +2305,7 @@ int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res) struct inode *inode_alloc_inode; struct buffer_head *alloc_bh = NULL; - mlog_entry("blkno: %llu", blkno); + mlog_entry("blkno: %llu", (unsigned long long)blkno); status = ocfs2_get_suballoc_slot_bit(osb, blkno, &suballoc_slot, &suballoc_bit); diff --git a/fs/proc/array.c b/fs/proc/array.c index 7e4877d9dcb5..725a650bbbb8 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -80,6 +80,7 @@ #include <linux/delayacct.h> #include <linux/seq_file.h> #include <linux/pid_namespace.h> +#include <linux/ptrace.h> #include <linux/tracehook.h> #include <asm/pgtable.h> @@ -352,6 +353,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, char state; pid_t ppid = 0, pgid = -1, sid = -1; int num_threads = 0; + int permitted; struct mm_struct *mm; unsigned long long start_time; unsigned long cmin_flt = 0, cmaj_flt = 0; @@ -364,11 +366,14 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, state = *get_task_state(task); vsize = eip = esp = 0; + permitted = ptrace_may_access(task, PTRACE_MODE_READ); mm = get_task_mm(task); if (mm) { vsize = task_vsize(mm); - eip = KSTK_EIP(task); - esp = KSTK_ESP(task); + if (permitted) { + eip = KSTK_EIP(task); + esp = KSTK_ESP(task); + } } get_task_comm(tcomm, task); @@ -424,7 +429,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, unlock_task_sighand(task, &flags); } - if (!whole || num_threads < 2) + if (permitted && (!whole || num_threads < 2)) wchan = get_wchan(task); if (!whole) { min_flt = task->min_flt; @@ -476,7 +481,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, rsslim, mm ? mm->start_code : 0, mm ? mm->end_code : 0, - mm ? mm->start_stack : 0, + (permitted && mm) ? mm->start_stack : 0, esp, eip, /* The signal information here is obsolete. diff --git a/fs/proc/base.c b/fs/proc/base.c index aa763ab00777..fb45615943c2 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -322,7 +322,10 @@ static int proc_pid_wchan(struct task_struct *task, char *buffer) wchan = get_wchan(task); if (lookup_symbol_name(wchan, symname) < 0) - return sprintf(buffer, "%lu", wchan); + if (!ptrace_may_access(task, PTRACE_MODE_READ)) + return 0; + else + return sprintf(buffer, "%lu", wchan); else return sprintf(buffer, "%s", symname); } diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c index 74ea974f5ca6..c6b0302af4c4 100644 --- a/fs/proc/meminfo.c +++ b/fs/proc/meminfo.c @@ -35,7 +35,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v) #define K(x) ((x) << (PAGE_SHIFT - 10)) si_meminfo(&i); si_swapinfo(&i); - committed = atomic_long_read(&vm_committed_space); + committed = percpu_counter_read_positive(&vm_committed_as); allowed = ((totalram_pages - hugetlb_total_pages()) * sysctl_overcommit_ratio / 100) + total_swap_pages; diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 39e4ad4f59f4..6f61b7cc32e0 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -665,6 +665,10 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, goto out_task; ret = 0; + + if (!count) + goto out_task; + mm = get_task_mm(task); if (!mm) goto out_task; diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index 3a6ed426327a..ca7c6005a487 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -5880,7 +5880,7 @@ xfs_getbmap( void *arg) /* formatter arg */ { __int64_t bmvend; /* last block requested */ - int error; /* return value */ + int error = 0; /* return value */ __int64_t fixlen; /* length for -1 case */ int i; /* extent number */ int lock; /* lock state */ @@ -5890,39 +5890,18 @@ xfs_getbmap( int nexleft; /* # of user extents left */ int subnex; /* # of bmapi's can do */ int nmap; /* number of map entries */ - struct getbmapx out; /* output structure */ + struct getbmapx *out; /* output structure */ int whichfork; /* data or attr fork */ int prealloced; /* this is a file with * preallocated data space */ int iflags; /* interface flags */ int bmapi_flags; /* flags for xfs_bmapi */ + int cur_ext = 0; mp = ip->i_mount; iflags = bmv->bmv_iflags; - whichfork = iflags & BMV_IF_ATTRFORK ? XFS_ATTR_FORK : XFS_DATA_FORK; - /* If the BMV_IF_NO_DMAPI_READ interface bit specified, do not - * generate a DMAPI read event. Otherwise, if the DM_EVENT_READ - * bit is set for the file, generate a read event in order - * that the DMAPI application may do its thing before we return - * the extents. Usually this means restoring user file data to - * regions of the file that look like holes. - * - * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify - * BMV_IF_NO_DMAPI_READ so that read events are generated. - * If this were not true, callers of ioctl( XFS_IOC_GETBMAP ) - * could misinterpret holes in a DMAPI file as true holes, - * when in fact they may represent offline user data. - */ - if ((iflags & BMV_IF_NO_DMAPI_READ) == 0 && - DM_EVENT_ENABLED(ip, DM_EVENT_READ) && - whichfork == XFS_DATA_FORK) { - error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, 0, 0, 0, NULL); - if (error) - return XFS_ERROR(error); - } - if (whichfork == XFS_ATTR_FORK) { if (XFS_IFORK_Q(ip)) { if (ip->i_d.di_aformat != XFS_DINODE_FMT_EXTENTS && @@ -5936,11 +5915,37 @@ xfs_getbmap( ip->i_mount); return XFS_ERROR(EFSCORRUPTED); } - } else if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS && - ip->i_d.di_format != XFS_DINODE_FMT_BTREE && - ip->i_d.di_format != XFS_DINODE_FMT_LOCAL) - return XFS_ERROR(EINVAL); - if (whichfork == XFS_DATA_FORK) { + + prealloced = 0; + fixlen = 1LL << 32; + } else { + /* + * If the BMV_IF_NO_DMAPI_READ interface bit specified, do + * not generate a DMAPI read event. Otherwise, if the + * DM_EVENT_READ bit is set for the file, generate a read + * event in order that the DMAPI application may do its thing + * before we return the extents. Usually this means restoring + * user file data to regions of the file that look like holes. + * + * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify + * BMV_IF_NO_DMAPI_READ so that read events are generated. + * If this were not true, callers of ioctl(XFS_IOC_GETBMAP) + * could misinterpret holes in a DMAPI file as true holes, + * when in fact they may represent offline user data. + */ + if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) && + !(iflags & BMV_IF_NO_DMAPI_READ)) { + error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, + 0, 0, 0, NULL); + if (error) + return XFS_ERROR(error); + } + + if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS && + ip->i_d.di_format != XFS_DINODE_FMT_BTREE && + ip->i_d.di_format != XFS_DINODE_FMT_LOCAL) + return XFS_ERROR(EINVAL); + if (xfs_get_extsz_hint(ip) || ip->i_d.di_flags & (XFS_DIFLAG_PREALLOC|XFS_DIFLAG_APPEND)){ prealloced = 1; @@ -5949,42 +5954,41 @@ xfs_getbmap( prealloced = 0; fixlen = ip->i_size; } - } else { - prealloced = 0; - fixlen = 1LL << 32; } if (bmv->bmv_length == -1) { fixlen = XFS_FSB_TO_BB(mp, XFS_B_TO_FSB(mp, fixlen)); - bmv->bmv_length = MAX( (__int64_t)(fixlen - bmv->bmv_offset), - (__int64_t)0); - } else if (bmv->bmv_length < 0) - return XFS_ERROR(EINVAL); - if (bmv->bmv_length == 0) { + bmv->bmv_length = + max_t(__int64_t, fixlen - bmv->bmv_offset, 0); + } else if (bmv->bmv_length == 0) { bmv->bmv_entries = 0; return 0; + } else if (bmv->bmv_length < 0) { + return XFS_ERROR(EINVAL); } + nex = bmv->bmv_count - 1; if (nex <= 0) return XFS_ERROR(EINVAL); bmvend = bmv->bmv_offset + bmv->bmv_length; - xfs_ilock(ip, XFS_IOLOCK_SHARED); - if (((iflags & BMV_IF_DELALLOC) == 0) && - (whichfork == XFS_DATA_FORK) && - (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size)) { - /* xfs_fsize_t last_byte = xfs_file_last_byte(ip); */ - error = xfs_flush_pages(ip, (xfs_off_t)0, - -1, 0, FI_REMAPF); - if (error) { - xfs_iunlock(ip, XFS_IOLOCK_SHARED); - return error; + if (bmv->bmv_count > ULONG_MAX / sizeof(struct getbmapx)) + return XFS_ERROR(ENOMEM); + out = kmem_zalloc(bmv->bmv_count * sizeof(struct getbmapx), KM_MAYFAIL); + if (!out) + return XFS_ERROR(ENOMEM); + + xfs_ilock(ip, XFS_IOLOCK_SHARED); + if (whichfork == XFS_DATA_FORK && !(iflags & BMV_IF_DELALLOC)) { + if (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size) { + error = xfs_flush_pages(ip, 0, -1, 0, FI_REMAPF); + if (error) + goto out_unlock_iolock; } - } - ASSERT(whichfork == XFS_ATTR_FORK || (iflags & BMV_IF_DELALLOC) || - ip->i_delayed_blks == 0); + ASSERT(ip->i_delayed_blks == 0); + } lock = xfs_ilock_map_shared(ip); @@ -5995,23 +5999,25 @@ xfs_getbmap( if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1) nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1; - bmapi_flags = xfs_bmapi_aflag(whichfork) | - ((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE); + bmapi_flags = xfs_bmapi_aflag(whichfork); + if (!(iflags & BMV_IF_PREALLOC)) + bmapi_flags |= XFS_BMAPI_IGSTATE; /* * Allocate enough space to handle "subnex" maps at a time. */ + error = ENOMEM; subnex = 16; - map = kmem_alloc(subnex * sizeof(*map), KM_SLEEP); + map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL); + if (!map) + goto out_unlock_ilock; bmv->bmv_entries = 0; - if ((XFS_IFORK_NEXTENTS(ip, whichfork) == 0)) { - if (((iflags & BMV_IF_DELALLOC) == 0) || - whichfork == XFS_ATTR_FORK) { - error = 0; - goto unlock_and_return; - } + if (XFS_IFORK_NEXTENTS(ip, whichfork) == 0 && + (whichfork == XFS_ATTR_FORK || !(iflags & BMV_IF_DELALLOC))) { + error = 0; + goto out_free_map; } nexleft = nex; @@ -6023,53 +6029,61 @@ xfs_getbmap( bmapi_flags, NULL, 0, map, &nmap, NULL, NULL); if (error) - goto unlock_and_return; + goto out_free_map; ASSERT(nmap <= subnex); for (i = 0; i < nmap && nexleft && bmv->bmv_length; i++) { - out.bmv_oflags = 0; + out[cur_ext].bmv_oflags = 0; if (map[i].br_state == XFS_EXT_UNWRITTEN) - out.bmv_oflags |= BMV_OF_PREALLOC; + out[cur_ext].bmv_oflags |= BMV_OF_PREALLOC; else if (map[i].br_startblock == DELAYSTARTBLOCK) - out.bmv_oflags |= BMV_OF_DELALLOC; - out.bmv_offset = XFS_FSB_TO_BB(mp, map[i].br_startoff); - out.bmv_length = XFS_FSB_TO_BB(mp, map[i].br_blockcount); - out.bmv_unused1 = out.bmv_unused2 = 0; + out[cur_ext].bmv_oflags |= BMV_OF_DELALLOC; + out[cur_ext].bmv_offset = + XFS_FSB_TO_BB(mp, map[i].br_startoff); + out[cur_ext].bmv_length = + XFS_FSB_TO_BB(mp, map[i].br_blockcount); + out[cur_ext].bmv_unused1 = 0; + out[cur_ext].bmv_unused2 = 0; ASSERT(((iflags & BMV_IF_DELALLOC) != 0) || (map[i].br_startblock != DELAYSTARTBLOCK)); if (map[i].br_startblock == HOLESTARTBLOCK && whichfork == XFS_ATTR_FORK) { /* came to the end of attribute fork */ - out.bmv_oflags |= BMV_OF_LAST; - goto unlock_and_return; - } else { - int full = 0; /* user array is full */ - - if (!xfs_getbmapx_fix_eof_hole(ip, &out, - prealloced, bmvend, - map[i].br_startblock)) { - goto unlock_and_return; - } - - /* format results & advance arg */ - error = formatter(&arg, &out, &full); - if (error || full) - goto unlock_and_return; - nexleft--; - bmv->bmv_offset = - out.bmv_offset + out.bmv_length; - bmv->bmv_length = MAX((__int64_t)0, - (__int64_t)(bmvend - bmv->bmv_offset)); - bmv->bmv_entries++; + out[cur_ext].bmv_oflags |= BMV_OF_LAST; + goto out_free_map; } + + if (!xfs_getbmapx_fix_eof_hole(ip, &out[cur_ext], + prealloced, bmvend, + map[i].br_startblock)) + goto out_free_map; + + nexleft--; + bmv->bmv_offset = + out[cur_ext].bmv_offset + + out[cur_ext].bmv_length; + bmv->bmv_length = + max_t(__int64_t, 0, bmvend - bmv->bmv_offset); + bmv->bmv_entries++; + cur_ext++; } } while (nmap && nexleft && bmv->bmv_length); -unlock_and_return: + out_free_map: + kmem_free(map); + out_unlock_ilock: xfs_iunlock_map_shared(ip, lock); + out_unlock_iolock: xfs_iunlock(ip, XFS_IOLOCK_SHARED); - kmem_free(map); + for (i = 0; i < cur_ext; i++) { + int full = 0; /* user array is full */ + + /* format results & advance arg */ + error = formatter(&arg, &out[i], &full); + if (error || full) + break; + } return error; } diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index e7ae08d1df48..123b20c8cbf2 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1258,8 +1258,10 @@ xfs_file_last_byte( * necessary. */ if (ip->i_df.if_flags & XFS_IFEXTENTS) { + xfs_ilock(ip, XFS_ILOCK_SHARED); error = xfs_bmap_last_offset(NULL, ip, &last_block, XFS_DATA_FORK); + xfs_iunlock(ip, XFS_ILOCK_SHARED); if (error) { last_block = 0; } diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index b101990df027..65a99725d0cc 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -291,14 +291,17 @@ xfs_mount_validate_sb( sbp->sb_sectsize > XFS_MAX_SECTORSIZE || sbp->sb_sectlog < XFS_MIN_SECTORSIZE_LOG || sbp->sb_sectlog > XFS_MAX_SECTORSIZE_LOG || + sbp->sb_sectsize != (1 << sbp->sb_sectlog) || sbp->sb_blocksize < XFS_MIN_BLOCKSIZE || sbp->sb_blocksize > XFS_MAX_BLOCKSIZE || sbp->sb_blocklog < XFS_MIN_BLOCKSIZE_LOG || sbp->sb_blocklog > XFS_MAX_BLOCKSIZE_LOG || + sbp->sb_blocksize != (1 << sbp->sb_blocklog) || sbp->sb_inodesize < XFS_DINODE_MIN_SIZE || sbp->sb_inodesize > XFS_DINODE_MAX_SIZE || sbp->sb_inodelog < XFS_DINODE_MIN_LOG || sbp->sb_inodelog > XFS_DINODE_MAX_LOG || + sbp->sb_inodesize != (1 << sbp->sb_inodelog) || (sbp->sb_blocklog - sbp->sb_inodelog != sbp->sb_inopblog) || (sbp->sb_rextsize * sbp->sb_blocksize > XFS_MAX_RTEXTSIZE) || (sbp->sb_rextsize * sbp->sb_blocksize < XFS_MIN_RTEXTSIZE) || diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h index 7abdaa91ccd3..3673a13b6703 100644 --- a/include/asm-generic/atomic.h +++ b/include/asm-generic/atomic.h @@ -132,9 +132,9 @@ static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u) #define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l)) #define atomic_long_cmpxchg(l, old, new) \ - (atomic_cmpxchg((atomic64_t *)(l), (old), (new))) + (atomic64_cmpxchg((atomic64_t *)(l), (old), (new))) #define atomic_long_xchg(v, new) \ - (atomic_xchg((atomic64_t *)(l), (new))) + (atomic64_xchg((atomic64_t *)(l), (new))) #else /* BITS_PER_LONG == 64 */ diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index e727fe0d1451..4b6755984d24 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -58,12 +58,13 @@ struct bug_entry { */ #ifndef __WARN #ifndef __ASSEMBLY__ -extern void warn_slowpath(const char *file, const int line, +extern void warn_slowpath_fmt(const char *file, const int line, const char *fmt, ...) __attribute__((format(printf, 3, 4))); +extern void warn_slowpath_null(const char *file, const int line); #define WANT_WARN_ON_SLOWPATH #endif -#define __WARN() warn_slowpath(__FILE__, __LINE__, NULL) -#define __WARN_printf(arg...) warn_slowpath(__FILE__, __LINE__, arg) +#define __WARN() warn_slowpath_null(__FILE__, __LINE__) +#define __WARN_printf(arg...) warn_slowpath_fmt(__FILE__, __LINE__, arg) #else #define __WARN_printf(arg...) do { printk(arg); __WARN(); } while (0) #endif diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index 6638b8148de7..61ee18c1bdb4 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -82,7 +82,19 @@ struct linux_binfmt { int hasvdso; }; -extern int register_binfmt(struct linux_binfmt *); +extern int __register_binfmt(struct linux_binfmt *fmt, int insert); + +/* Registration of default binfmt handlers */ +static inline int register_binfmt(struct linux_binfmt *fmt) +{ + return __register_binfmt(fmt, 0); +} +/* Same as above, but adds a new binfmt at the top of the list */ +static inline int insert_binfmt(struct linux_binfmt *fmt) +{ + return __register_binfmt(fmt, 1); +} + extern void unregister_binfmt(struct linux_binfmt *); extern int prepare_binprm(struct linux_binprm *); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 2755d5c6da22..b4f71f1a4af7 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -601,6 +601,7 @@ enum { blk_failfast_driver(rq)) #define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED) #define blk_rq_io_stat(rq) ((rq)->cmd_flags & REQ_IO_STAT) +#define blk_rq_quiet(rq) ((rq)->cmd_flags & REQ_QUIET) #define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq))) diff --git a/include/linux/input.h b/include/linux/input.h index 6b28048fc568..0e6ff5de3588 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -106,6 +106,7 @@ struct input_absinfo { #define SYN_REPORT 0 #define SYN_CONFIG 1 +#define SYN_MT_REPORT 2 /* * Keys and buttons @@ -445,6 +446,7 @@ struct input_absinfo { #define BTN_STYLUS2 0x14c #define BTN_TOOL_DOUBLETAP 0x14d #define BTN_TOOL_TRIPLETAP 0x14e +#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ #define BTN_WHEEL 0x150 #define BTN_GEAR_DOWN 0x150 @@ -644,6 +646,17 @@ struct input_absinfo { #define ABS_TOOL_WIDTH 0x1c #define ABS_VOLUME 0x20 #define ABS_MISC 0x28 + +#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ +#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ +#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ +#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ +#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ +#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */ +#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */ +#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ +#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ + #define ABS_MAX 0x3f #define ABS_CNT (ABS_MAX+1) @@ -743,6 +756,12 @@ struct input_absinfo { #define BUS_ATARI 0x1B /* + * MT_TOOL types + */ +#define MT_TOOL_FINGER 0 +#define MT_TOOL_PEN 1 + +/* * Values describing the status of a force-feedback effect */ #define FF_STATUS_STOPPED 0x00 @@ -1311,6 +1330,11 @@ static inline void input_sync(struct input_dev *dev) input_event(dev, EV_SYN, SYN_REPORT, 0); } +static inline void input_mt_sync(struct input_dev *dev) +{ + input_event(dev, EV_SYN, SYN_MT_REPORT, 0); +} + void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code); static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat) diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index a9e3b76aa884..25b9ca93d232 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -56,7 +56,7 @@ extern void mem_cgroup_move_lists(struct page *page, enum lru_list from, enum lru_list to); extern void mem_cgroup_uncharge_page(struct page *page); extern void mem_cgroup_uncharge_cache_page(struct page *page); -extern int mem_cgroup_shrink_usage(struct page *page, +extern int mem_cgroup_shmem_charge_fallback(struct page *page, struct mm_struct *mm, gfp_t gfp_mask); extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan, @@ -155,7 +155,7 @@ static inline void mem_cgroup_uncharge_cache_page(struct page *page) { } -static inline int mem_cgroup_shrink_usage(struct page *page, +static inline int mem_cgroup_shmem_charge_fallback(struct page *page, struct mm_struct *mm, gfp_t gfp_mask) { return 0; diff --git a/include/linux/mman.h b/include/linux/mman.h index 30d1073bac3b..9872d6ca58ae 100644 --- a/include/linux/mman.h +++ b/include/linux/mman.h @@ -12,21 +12,18 @@ #ifdef __KERNEL__ #include <linux/mm.h> +#include <linux/percpu_counter.h> #include <asm/atomic.h> extern int sysctl_overcommit_memory; extern int sysctl_overcommit_ratio; -extern atomic_long_t vm_committed_space; +extern struct percpu_counter vm_committed_as; -#ifdef CONFIG_SMP -extern void vm_acct_memory(long pages); -#else static inline void vm_acct_memory(long pages) { - atomic_long_add(pages, &vm_committed_space); + percpu_counter_add(&vm_committed_as, pages); } -#endif static inline void vm_unacct_memory(long pages) { diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index 1b2e43502ef7..c9efe039dc57 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -472,7 +472,7 @@ static inline void xt_info_rdlock_bh(void) local_bh_disable(); lock = &__get_cpu_var(xt_info_locks); - if (!lock->readers++) + if (likely(!lock->readers++)) spin_lock(&lock->lock); } @@ -480,7 +480,7 @@ static inline void xt_info_rdunlock_bh(void) { struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks); - if (!--lock->readers) + if (likely(!--lock->readers)) spin_unlock(&lock->lock); local_bh_enable(); } diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index 3d327b67d7e2..908406651330 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -51,6 +51,16 @@ extern int of_register_driver(struct of_platform_driver *drv, struct bus_type *bus); extern void of_unregister_driver(struct of_platform_driver *drv); +/* Platform drivers register/unregister */ +static inline int of_register_platform_driver(struct of_platform_driver *drv) +{ + return of_register_driver(drv, &of_platform_bus_type); +} +static inline void of_unregister_platform_driver(struct of_platform_driver *drv) +{ + of_unregister_driver(drv); +} + #include <asm/of_platform.h> extern struct of_device *of_find_device_by_node(struct device_node *np); diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 1758d9f5b5c3..08afe43118f4 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -261,6 +261,7 @@ void xprt_conditional_disconnect(struct rpc_xprt *xprt, unsigned int cookie); #define XPRT_BINDING (5) #define XPRT_CLOSING (6) #define XPRT_CONNECTION_ABORT (7) +#define XPRT_CONNECTION_CLOSE (8) static inline void xprt_set_connected(struct rpc_xprt *xprt) { diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 3c86ed25a04c..c24124a42ce5 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -17,6 +17,7 @@ #define USB_CDC_SUBCLASS_DMM 0x09 #define USB_CDC_SUBCLASS_MDLM 0x0a #define USB_CDC_SUBCLASS_OBEX 0x0b +#define USB_CDC_SUBCLASS_EEM 0x0c #define USB_CDC_PROTO_NONE 0 @@ -28,6 +29,8 @@ #define USB_CDC_ACM_PROTO_AT_CDMA 6 #define USB_CDC_ACM_PROTO_VENDOR 0xff +#define USB_CDC_PROTO_EEM 7 + /*-------------------------------------------------------------------------*/ /* diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 242348bb3766..cec79adbe3ea 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -4,6 +4,7 @@ * compatible drivers/servers. */ #include <linux/types.h> #include <linux/virtio_config.h> +#include <linux/if_ether.h> /* The ID for virtio_net */ #define VIRTIO_ID_NET 1 diff --git a/include/net/9p/client.h b/include/net/9p/client.h index 4012e07162e5..e26812274b75 100644 --- a/include/net/9p/client.h +++ b/include/net/9p/client.h @@ -98,7 +98,6 @@ enum p9_req_status_t { struct p9_req_t { int status; int t_err; - u16 flush_tag; wait_queue_head_t *wq; struct p9_fcall *tc; struct p9_fcall *rc; diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index be5bd713d2c9..73aead222b32 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -457,6 +457,7 @@ int hci_recv_fragment(struct hci_dev *hdev, int type, void *data, int count); int hci_register_sysfs(struct hci_dev *hdev); void hci_unregister_sysfs(struct hci_dev *hdev); +void hci_conn_init_sysfs(struct hci_conn *conn); void hci_conn_add_sysfs(struct hci_conn *conn); void hci_conn_del_sysfs(struct hci_conn *conn); diff --git a/include/net/tcp.h b/include/net/tcp.h index 1b94b9bfe2dc..646dbe3962ea 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -41,6 +41,7 @@ #include <net/ip.h> #include <net/tcp_states.h> #include <net/inet_ecn.h> +#include <net/dst.h> #include <linux/seq_file.h> @@ -530,6 +531,17 @@ static inline void tcp_fast_path_check(struct sock *sk) tcp_fast_path_on(tp); } +/* Compute the actual rto_min value */ +static inline u32 tcp_rto_min(struct sock *sk) +{ + struct dst_entry *dst = __sk_dst_get(sk); + u32 rto_min = TCP_RTO_MIN; + + if (dst && dst_metric_locked(dst, RTAX_RTO_MIN)) + rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN); + return rto_min; +} + /* Compute the actual receive window we are currently advertising. * Rcv_nxt can be after the window if our peer push more data * than the offered window. @@ -895,7 +907,7 @@ static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb) wake_up_interruptible(sk->sk_sleep); if (!inet_csk_ack_scheduled(sk)) inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK, - (3 * TCP_RTO_MIN) / 4, + (3 * tcp_rto_min(sk)) / 4, TCP_RTO_MAX); } return 1; diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h index 1b7af3a64c7c..ac4cd38c860e 100644 --- a/include/scsi/fc/fc_fs.h +++ b/include/scsi/fc/fc_fs.h @@ -149,6 +149,7 @@ enum fc_rctl { * Well-known fabric addresses. */ enum fc_well_known_fid { + FC_FID_NONE = 0x000000, /* No destination */ FC_FID_BCAST = 0xffffff, /* broadcast */ FC_FID_FLOGI = 0xfffffe, /* fabric login */ FC_FID_FCTRL = 0xfffffd, /* fabric controller */ diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 0303a6a098cc..45f9cc642c46 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -637,6 +637,7 @@ struct fc_disc { enum fc_disc_event); struct list_head rports; + struct list_head rogue_rports; struct fc_lport *lport; struct mutex disc_mutex; struct fc_gpn_ft_resp partial_buf; /* partial name buffer */ diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 7ffaed2f94dd..0289f5745fb9 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -36,6 +36,7 @@ struct scsi_transport_template; struct scsi_host_template; struct scsi_device; struct Scsi_Host; +struct scsi_target; struct scsi_cmnd; struct socket; struct iscsi_transport; @@ -350,6 +351,7 @@ extern struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, bool xmit_can_sleep); extern void iscsi_host_remove(struct Scsi_Host *shost); extern void iscsi_host_free(struct Scsi_Host *shost); +extern int iscsi_target_alloc(struct scsi_target *starget); /* * session management diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h index cd3cbf764650..62b2ab8c69d4 100644 --- a/include/scsi/osd_protocol.h +++ b/include/scsi/osd_protocol.h @@ -24,17 +24,18 @@ enum { OSDv1_ADDITIONAL_CDB_LENGTH = 192, OSDv1_TOTAL_CDB_LEN = OSDv1_ADDITIONAL_CDB_LENGTH + 8, OSDv1_CAP_LEN = 80, + /* Latest supported version */ -/* OSD_ADDITIONAL_CDB_LENGTH = 216,*/ + OSDv2_ADDITIONAL_CDB_LENGTH = 228, OSD_ADDITIONAL_CDB_LENGTH = - OSDv1_ADDITIONAL_CDB_LENGTH, /* FIXME: Pete rev-001 sup */ + OSDv2_ADDITIONAL_CDB_LENGTH, OSD_TOTAL_CDB_LEN = OSD_ADDITIONAL_CDB_LENGTH + 8, -/* OSD_CAP_LEN = 104,*/ - OSD_CAP_LEN = OSDv1_CAP_LEN,/* FIXME: Pete rev-001 sup */ + OSD_CAP_LEN = 104, OSD_SYSTEMID_LEN = 20, - OSD_CRYPTO_KEYID_SIZE = 20, - /*FIXME: OSDv2_CRYPTO_KEYID_SIZE = 32,*/ + OSDv1_CRYPTO_KEYID_SIZE = 20, + OSDv2_CRYPTO_KEYID_SIZE = 32, + OSD_CRYPTO_KEYID_SIZE = OSDv2_CRYPTO_KEYID_SIZE, OSD_CRYPTO_SEED_SIZE = 4, OSD_CRYPTO_NONCE_SIZE = 12, OSD_MAX_SENSE_LEN = 252, /* from SPC-3 */ @@ -164,7 +165,11 @@ struct osd_cdb_head { /* called allocation_length in some commands */ /*32*/ __be64 length; /*40*/ __be64 start_address; -/*48*/ __be32 list_identifier;/* Rarely used */ + union { +/*48*/ __be32 list_identifier;/* Rarely used */ + /* OSD2r05 5.2.5 CDB continuation length */ +/*48*/ __be32 cdb_continuation_length; + }; } __packed v2; }; /*52*/ union { /* selected attributes mode Page/List/Single */ @@ -204,29 +209,40 @@ struct osd_cdb_head { /*80*/ /*160 v1*/ -/*184 v2*/ -struct osd_security_parameters { -/*160*/u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE]; +struct osdv1_security_parameters { +/*160*/u8 integrity_check_value[OSDv1_CRYPTO_KEYID_SIZE]; /*180*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE]; /*192*/osd_cdb_offset data_in_integrity_check_offset; /*196*/osd_cdb_offset data_out_integrity_check_offset; } __packed; /*200 v1*/ -/*224 v2*/ -/* FIXME: osdv2_security_parameters */ +/*184 v2*/ +struct osdv2_security_parameters { +/*184*/u8 integrity_check_value[OSDv2_CRYPTO_KEYID_SIZE]; +/*216*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE]; +/*228*/osd_cdb_offset data_in_integrity_check_offset; +/*232*/osd_cdb_offset data_out_integrity_check_offset; +} __packed; +/*236 v2*/ + +struct osd_security_parameters { + union { + struct osdv1_security_parameters v1; + struct osdv2_security_parameters v2; + }; +}; struct osdv1_cdb { struct osd_cdb_head h; u8 caps[OSDv1_CAP_LEN]; - struct osd_security_parameters sec_params; + struct osdv1_security_parameters sec_params; } __packed; struct osdv2_cdb { struct osd_cdb_head h; u8 caps[OSD_CAP_LEN]; - struct osd_security_parameters sec_params; - /* FIXME: osdv2_security_parameters */ + struct osdv2_security_parameters sec_params; } __packed; struct osd_cdb { @@ -301,14 +317,25 @@ struct osd_attributes_list_attrid { } __packed; /* + * NOTE: v1: is not aligned. + */ +struct osdv1_attributes_list_element { + __be32 attr_page; + __be32 attr_id; + __be16 attr_bytes; /* valid bytes at attr_val without padding */ + u8 attr_val[0]; +} __packed; + +/* * osd2r03: 7.1.3.3 List entry format for retrieved attributes and * for setting attributes - * NOTE: v2 is 8-bytes aligned, v1 is not aligned. + * NOTE: v2 is 8-bytes aligned */ -struct osd_attributes_list_element { +struct osdv2_attributes_list_element { __be32 attr_page; __be32 attr_id; - __be16 attr_bytes; + u8 reserved[6]; + __be16 attr_bytes; /* valid bytes at attr_val without padding */ u8 attr_val[0]; } __packed; @@ -324,13 +351,13 @@ enum { static inline unsigned osdv1_attr_list_elem_size(unsigned len) { - return ALIGN(len + sizeof(struct osd_attributes_list_element), + return ALIGN(len + sizeof(struct osdv1_attributes_list_element), OSDv1_ATTRIBUTES_ELEM_ALIGN); } static inline unsigned osdv2_attr_list_elem_size(unsigned len) { - return ALIGN(len + sizeof(struct osd_attributes_list_element), + return ALIGN(len + sizeof(struct osdv2_attributes_list_element), OSD_ATTRIBUTES_ELEM_ALIGN); } @@ -419,15 +446,35 @@ struct osd_data_out_integrity_info { __be64 data_bytes; __be64 set_attributes_bytes; __be64 get_attributes_bytes; - __be64 integrity_check_value; + __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE]; } __packed; +/* Same osd_data_out_integrity_info is used for OSD2/OSD1. The only difference + * Is the sizeof the structure since in OSD1 the last array is smaller. Use + * below for version independent handling of this structure + */ +static inline int osd_data_out_integrity_info_sizeof(bool is_ver1) +{ + return sizeof(struct osd_data_out_integrity_info) - + (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE)); +} + struct osd_data_in_integrity_info { __be64 data_bytes; __be64 retrieved_attributes_bytes; - __be64 integrity_check_value; + __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE]; } __packed; +/* Same osd_data_in_integrity_info is used for OSD2/OSD1. The only difference + * Is the sizeof the structure since in OSD1 the last array is smaller. Use + * below for version independent handling of this structure + */ +static inline int osd_data_in_integrity_info_sizeof(bool is_ver1) +{ + return sizeof(struct osd_data_in_integrity_info) - + (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE)); +} + struct osd_timestamp { u8 time[6]; /* number of milliseconds since 1/1/1970 UT (big endian) */ } __packed; @@ -477,7 +524,7 @@ enum osd_capability_bit_masks { OSD_SEC_CAP_NONE1 = BIT(8), OSD_SEC_CAP_NONE2 = BIT(9), - OSD_SEC_CAP_NONE3 = BIT(10), + OSD_SEC_GBL_REM = BIT(10), /*v2 only*/ OSD_SEC_CAP_QUERY = BIT(11), /*v2 only*/ OSD_SEC_CAP_M_OBJECT = BIT(12), /*v2 only*/ OSD_SEC_CAP_POL_SEC = BIT(13), @@ -552,8 +599,7 @@ struct osdv1_capability { struct osd_capability { struct osd_capability_head h; -/* struct osd_cap_object_descriptor od;*/ - struct osdv1_cap_object_descriptor od; /* FIXME: Pete rev-001 sup */ + struct osd_cap_object_descriptor od; } __packed; /** diff --git a/init/initramfs.c b/init/initramfs.c index 9ee7b7810417..4c00edc59689 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -574,11 +574,10 @@ static int __init populate_rootfs(void) if (initrd_start) { #ifdef CONFIG_BLK_DEV_RAM int fd; - printk(KERN_INFO "checking if image is initramfs...\n"); + printk(KERN_INFO "Trying to unpack rootfs image as initramfs...\n"); err = unpack_to_rootfs((char *)initrd_start, initrd_end - initrd_start); if (!err) { - printk(KERN_INFO "rootfs image is initramfs; unpacking...\n"); free_initrd(); return 0; } else { @@ -596,15 +595,11 @@ static int __init populate_rootfs(void) free_initrd(); } #else - printk(KERN_INFO "Unpacking initramfs..."); + printk(KERN_INFO "Unpacking initramfs...\n"); err = unpack_to_rootfs((char *)initrd_start, initrd_end - initrd_start); - if (err) { - printk(" failed!\n"); - printk(KERN_EMERG "%s\n", err); - } else { - printk(" done\n"); - } + if (err) + printk(KERN_EMERG "Initramfs unpacking failed: %s\n", err); free_initrd(); #endif } diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index a6fe71fd5d1b..713098ee5a02 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1028,7 +1028,7 @@ static void audit_update_watch(struct audit_parent *parent, if (audit_enabled) { struct audit_buffer *ab; - ab = audit_log_start(NULL, GFP_KERNEL, + ab = audit_log_start(NULL, GFP_NOFS, AUDIT_CONFIG_CHANGE); audit_log_format(ab, "auid=%u ses=%u", audit_get_loginuid(current), @@ -1067,7 +1067,7 @@ static void audit_remove_parent_watches(struct audit_parent *parent) e = container_of(r, struct audit_entry, rule); if (audit_enabled) { struct audit_buffer *ab; - ab = audit_log_start(NULL, GFP_KERNEL, + ab = audit_log_start(NULL, GFP_NOFS, AUDIT_CONFIG_CHANGE); audit_log_format(ab, "auid=%u ses=%u", audit_get_loginuid(current), diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c index d82142be8dd2..26e08754744f 100644 --- a/kernel/irq/handle.c +++ b/kernel/irq/handle.c @@ -363,8 +363,6 @@ irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action) irqreturn_t ret, retval = IRQ_NONE; unsigned int status = 0; - WARN_ONCE(!in_irq(), "BUG: IRQ handler called from non-hardirq context!"); - if (!(action->flags & IRQF_DISABLED)) local_irq_enable_in_hardirq(); diff --git a/kernel/panic.c b/kernel/panic.c index 3dcaa1661357..874ecf1307ae 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -340,7 +340,7 @@ void oops_exit(void) } #ifdef WANT_WARN_ON_SLOWPATH -void warn_slowpath(const char *file, int line, const char *fmt, ...) +void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...) { va_list args; char function[KSYM_SYMBOL_LEN]; @@ -356,7 +356,7 @@ void warn_slowpath(const char *file, int line, const char *fmt, ...) if (board) printk(KERN_WARNING "Hardware name: %s\n", board); - if (fmt) { + if (*fmt) { va_start(args, fmt); vprintk(fmt, args); va_end(args); @@ -367,7 +367,14 @@ void warn_slowpath(const char *file, int line, const char *fmt, ...) print_oops_end_marker(); add_taint(TAINT_WARN); } -EXPORT_SYMBOL(warn_slowpath); +EXPORT_SYMBOL(warn_slowpath_fmt); + +void warn_slowpath_null(const char *file, int line) +{ + static const char *empty = ""; + warn_slowpath_fmt(file, line, empty); +} +EXPORT_SYMBOL(warn_slowpath_null); #endif #ifdef CONFIG_CC_STACKPROTECTOR diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index c9dcf98b4463..bece7c0b67b2 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -1420,19 +1420,19 @@ void run_posix_cpu_timers(struct task_struct *tsk) * timer call will interfere. */ list_for_each_entry_safe(timer, next, &firing, it.cpu.entry) { - int firing; + int cpu_firing; + spin_lock(&timer->it_lock); list_del_init(&timer->it.cpu.entry); - firing = timer->it.cpu.firing; + cpu_firing = timer->it.cpu.firing; timer->it.cpu.firing = 0; /* * The firing flag is -1 if we collided with a reset * of the timer, which already reported this * almost-firing as an overrun. So don't generate an event. */ - if (likely(firing >= 0)) { + if (likely(cpu_firing >= 0)) cpu_timer_fire(timer); - } spin_unlock(&timer->it_lock); } } diff --git a/kernel/sched.c b/kernel/sched.c index b902e587a3a0..26efa475bdc1 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4732,7 +4732,7 @@ void account_process_tick(struct task_struct *p, int user_tick) if (user_tick) account_user_time(p, one_jiffy, one_jiffy_scaled); - else if (p != rq->idle) + else if ((p != rq->idle) || (irq_count() != HARDIRQ_OFFSET)) account_system_time(p, HARDIRQ_OFFSET, one_jiffy, one_jiffy_scaled); else diff --git a/kernel/sysctl.c b/kernel/sysctl.c index e3d2c7dd59b9..ea78fa101ad6 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -103,6 +103,9 @@ static unsigned long one_ul = 1; static int one_hundred = 100; static int one_thousand = 1000; +/* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */ +static unsigned long dirty_bytes_min = 2 * PAGE_SIZE; + /* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */ static int maxolduid = 65535; static int minolduid; @@ -1006,7 +1009,7 @@ static struct ctl_table vm_table[] = { .mode = 0644, .proc_handler = &dirty_bytes_handler, .strategy = &sysctl_intvec, - .extra1 = &one_ul, + .extra1 = &dirty_bytes_min, }, { .procname = "dirty_writeback_centisecs", diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 21a5ca849514..83c4417b6a3c 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -93,7 +93,17 @@ void tick_handle_periodic(struct clock_event_device *dev) for (;;) { if (!clockevents_program_event(dev, next, ktime_get())) return; - tick_periodic(cpu); + /* + * Have to be careful here. If we're in oneshot mode, + * before we call tick_periodic() in a loop, we need + * to be sure we're using a real hardware clocksource. + * Otherwise we could get trapped in an infinite + * loop, as the tick_periodic() increments jiffies, + * when then will increment time, posibly causing + * the loop to trigger again and again. + */ + if (timekeeping_valid_for_hres()) + tick_periodic(cpu); next = ktime_add(next, tick_period); } } diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 1ce5dc6372b8..a884c09006c4 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3448,6 +3448,7 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos, if (!ref) break; + ref->ref = 1; ref->buffer = info->tr->buffer; ref->page = ring_buffer_alloc_read_page(ref->buffer); if (!ref->page) { diff --git a/lib/dma-debug.c b/lib/dma-debug.c index d3da7edc034f..69da09a085a1 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -400,60 +400,9 @@ out_err: return -ENOMEM; } -static int device_dma_allocations(struct device *dev) -{ - struct dma_debug_entry *entry; - unsigned long flags; - int count = 0, i; - - for (i = 0; i < HASH_SIZE; ++i) { - spin_lock_irqsave(&dma_entry_hash[i].lock, flags); - list_for_each_entry(entry, &dma_entry_hash[i].list, list) { - if (entry->dev == dev) - count += 1; - } - spin_unlock_irqrestore(&dma_entry_hash[i].lock, flags); - } - - return count; -} - -static int dma_debug_device_change(struct notifier_block *nb, - unsigned long action, void *data) -{ - struct device *dev = data; - int count; - - - switch (action) { - case BUS_NOTIFY_UNBIND_DRIVER: - count = device_dma_allocations(dev); - if (count == 0) - break; - err_printk(dev, NULL, "DMA-API: device driver has pending " - "DMA allocations while released from device " - "[count=%d]\n", count); - break; - default: - break; - } - - return 0; -} - void dma_debug_add_bus(struct bus_type *bus) { - struct notifier_block *nb; - - nb = kzalloc(sizeof(struct notifier_block), GFP_KERNEL); - if (nb == NULL) { - printk(KERN_ERR "dma_debug_add_bus: out of memory\n"); - return; - } - - nb->notifier_call = dma_debug_device_change; - - bus_register_notifier(bus, nb); + /* FIXME: register notifier */ } /* diff --git a/mm/Kconfig b/mm/Kconfig index 57971d2ab848..c2b57d81e153 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -225,3 +225,31 @@ config HAVE_MLOCKED_PAGE_BIT config MMU_NOTIFIER bool + +config NOMMU_INITIAL_TRIM_EXCESS + int "Turn on mmap() excess space trimming before booting" + depends on !MMU + default 1 + help + The NOMMU mmap() frequently needs to allocate large contiguous chunks + of memory on which to store mappings, but it can only ask the system + allocator for chunks in 2^N*PAGE_SIZE amounts - which is frequently + more than it requires. To deal with this, mmap() is able to trim off + the excess and return it to the allocator. + + If trimming is enabled, the excess is trimmed off and returned to the + system allocator, which can cause extra fragmentation, particularly + if there are a lot of transient processes. + + If trimming is disabled, the excess is kept, but not used, which for + long-term mappings means that the space is wasted. + + Trimming can be dynamically controlled through a sysctl option + (/proc/sys/vm/nr_trim_pages) which specifies the minimum number of + excess pages there must be before trimming should occur, or zero if + no trimming is to occur. + + This option specifies the initial value of this option. The default + of 1 says that all excess pages should be trimmed. + + See Documentation/nommu-mmap.txt for more information. diff --git a/mm/madvise.c b/mm/madvise.c index b9ce574827c8..36d6ea2b6340 100644 --- a/mm/madvise.c +++ b/mm/madvise.c @@ -112,6 +112,14 @@ static long madvise_willneed(struct vm_area_struct * vma, if (!file) return -EBADF; + /* + * Page cache readahead assumes page cache pages are order-0 which + * is not the case for hugetlbfs. Do not give a bad return value + * but ignore the advice. + */ + if (vma->vm_flags & VM_HUGETLB) + return 0; + if (file->f_mapping->a_ops->get_xip_mem) { /* no bad return value, but ignore advice */ return 0; diff --git a/mm/memcontrol.c b/mm/memcontrol.c index e44fb0fbb80e..01c2d8f14685 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1024,9 +1024,7 @@ static struct mem_cgroup *try_get_mem_cgroup_from_swapcache(struct page *page) return NULL; pc = lookup_page_cgroup(page); - /* - * Used bit of swapcache is solid under page lock. - */ + lock_page_cgroup(pc); if (PageCgroupUsed(pc)) { mem = pc->mem_cgroup; if (mem && !css_tryget(&mem->css)) @@ -1040,6 +1038,7 @@ static struct mem_cgroup *try_get_mem_cgroup_from_swapcache(struct page *page) mem = NULL; rcu_read_unlock(); } + unlock_page_cgroup(pc); return mem; } @@ -1618,37 +1617,28 @@ void mem_cgroup_end_migration(struct mem_cgroup *mem, } /* - * A call to try to shrink memory usage under specified resource controller. - * This is typically used for page reclaiming for shmem for reducing side - * effect of page allocation from shmem, which is used by some mem_cgroup. + * A call to try to shrink memory usage on charge failure at shmem's swapin. + * Calling hierarchical_reclaim is not enough because we should update + * last_oom_jiffies to prevent pagefault_out_of_memory from invoking global OOM. + * Moreover considering hierarchy, we should reclaim from the mem_over_limit, + * not from the memcg which this page would be charged to. + * try_charge_swapin does all of these works properly. */ -int mem_cgroup_shrink_usage(struct page *page, +int mem_cgroup_shmem_charge_fallback(struct page *page, struct mm_struct *mm, gfp_t gfp_mask) { struct mem_cgroup *mem = NULL; - int progress = 0; - int retry = MEM_CGROUP_RECLAIM_RETRIES; + int ret; if (mem_cgroup_disabled()) return 0; - if (page) - mem = try_get_mem_cgroup_from_swapcache(page); - if (!mem && mm) - mem = try_get_mem_cgroup_from_mm(mm); - if (unlikely(!mem)) - return 0; - do { - progress = mem_cgroup_hierarchical_reclaim(mem, - gfp_mask, true, false); - progress += mem_cgroup_check_under_limit(mem); - } while (!progress && --retry); + ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &mem); + if (!ret) + mem_cgroup_cancel_charge_swapin(mem); /* it does !mem check */ - css_put(&mem->css); - if (!retry) - return -ENOMEM; - return 0; + return ret; } static DEFINE_MUTEX(set_limit_mutex); diff --git a/mm/memory.c b/mm/memory.c index cf6873e91c6a..4126dd16778c 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1971,6 +1971,15 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, ret = tmp; goto unwritable_page; } + if (unlikely(!(tmp & VM_FAULT_LOCKED))) { + lock_page(old_page); + if (!old_page->mapping) { + ret = 0; /* retry the fault */ + unlock_page(old_page); + goto unwritable_page; + } + } else + VM_BUG_ON(!PageLocked(old_page)); /* * Since we dropped the lock we need to revalidate @@ -1980,9 +1989,11 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, */ page_table = pte_offset_map_lock(mm, pmd, address, &ptl); - page_cache_release(old_page); - if (!pte_same(*page_table, orig_pte)) + if (!pte_same(*page_table, orig_pte)) { + unlock_page(old_page); + page_cache_release(old_page); goto unlock; + } page_mkwrite = 1; } @@ -2094,9 +2105,6 @@ gotten: unlock: pte_unmap_unlock(page_table, ptl); if (dirty_page) { - if (vma->vm_file) - file_update_time(vma->vm_file); - /* * Yes, Virginia, this is actually required to prevent a race * with clear_page_dirty_for_io() from clearing the page dirty @@ -2105,16 +2113,41 @@ unlock: * * do_no_page is protected similarly. */ - wait_on_page_locked(dirty_page); - set_page_dirty_balance(dirty_page, page_mkwrite); + if (!page_mkwrite) { + wait_on_page_locked(dirty_page); + set_page_dirty_balance(dirty_page, page_mkwrite); + } put_page(dirty_page); + if (page_mkwrite) { + struct address_space *mapping = dirty_page->mapping; + + set_page_dirty(dirty_page); + unlock_page(dirty_page); + page_cache_release(dirty_page); + if (mapping) { + /* + * Some device drivers do not set page.mapping + * but still dirty their pages + */ + balance_dirty_pages_ratelimited(mapping); + } + } + + /* file_update_time outside page_lock */ + if (vma->vm_file) + file_update_time(vma->vm_file); } return ret; oom_free_new: page_cache_release(new_page); oom: - if (old_page) + if (old_page) { + if (page_mkwrite) { + unlock_page(old_page); + page_cache_release(old_page); + } page_cache_release(old_page); + } return VM_FAULT_OOM; unwritable_page: @@ -2458,8 +2491,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma, if (mem_cgroup_try_charge_swapin(mm, page, GFP_KERNEL, &ptr)) { ret = VM_FAULT_OOM; - unlock_page(page); - goto out; + goto out_page; } /* @@ -2521,6 +2553,7 @@ out: out_nomap: mem_cgroup_cancel_charge_swapin(ptr); pte_unmap_unlock(page_table, ptl); +out_page: unlock_page(page); page_cache_release(page); return ret; @@ -2664,27 +2697,22 @@ static int __do_fault(struct mm_struct *mm, struct vm_area_struct *vma, int tmp; unlock_page(page); - vmf.flags |= FAULT_FLAG_MKWRITE; + vmf.flags = FAULT_FLAG_WRITE|FAULT_FLAG_MKWRITE; tmp = vma->vm_ops->page_mkwrite(vma, &vmf); if (unlikely(tmp & (VM_FAULT_ERROR | VM_FAULT_NOPAGE))) { ret = tmp; - anon = 1; /* no anon but release vmf.page */ - goto out_unlocked; - } - lock_page(page); - /* - * XXX: this is not quite right (racy vs - * invalidate) to unlock and relock the page - * like this, however a better fix requires - * reworking page_mkwrite locking API, which - * is better done later. - */ - if (!page->mapping) { - ret = 0; - anon = 1; /* no anon but release vmf.page */ - goto out; + goto unwritable_page; } + if (unlikely(!(tmp & VM_FAULT_LOCKED))) { + lock_page(page); + if (!page->mapping) { + ret = 0; /* retry the fault */ + unlock_page(page); + goto unwritable_page; + } + } else + VM_BUG_ON(!PageLocked(page)); page_mkwrite = 1; } } @@ -2736,19 +2764,35 @@ static int __do_fault(struct mm_struct *mm, struct vm_area_struct *vma, pte_unmap_unlock(page_table, ptl); out: - unlock_page(vmf.page); -out_unlocked: - if (anon) - page_cache_release(vmf.page); - else if (dirty_page) { - if (vma->vm_file) - file_update_time(vma->vm_file); + if (dirty_page) { + struct address_space *mapping = page->mapping; - set_page_dirty_balance(dirty_page, page_mkwrite); + if (set_page_dirty(dirty_page)) + page_mkwrite = 1; + unlock_page(dirty_page); put_page(dirty_page); + if (page_mkwrite && mapping) { + /* + * Some device drivers do not set page.mapping but still + * dirty their pages + */ + balance_dirty_pages_ratelimited(mapping); + } + + /* file_update_time outside page_lock */ + if (vma->vm_file) + file_update_time(vma->vm_file); + } else { + unlock_page(vmf.page); + if (anon) + page_cache_release(vmf.page); } return ret; + +unwritable_page: + page_cache_release(page); + return ret; } static int do_linear_fault(struct mm_struct *mm, struct vm_area_struct *vma, diff --git a/mm/mmap.c b/mm/mmap.c index 3303d1ba8e87..6b7b1a95944b 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -85,7 +85,7 @@ EXPORT_SYMBOL(vm_get_page_prot); int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */ int sysctl_overcommit_ratio = 50; /* default is 50% */ int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT; -atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0); +struct percpu_counter vm_committed_as; /* * Check that a process has enough memory to allocate a new virtual @@ -179,11 +179,7 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin) if (mm) allowed -= mm->total_vm / 32; - /* - * cast `allowed' as a signed long because vm_committed_space - * sometimes has a negative value - */ - if (atomic_long_read(&vm_committed_space) < (long)allowed) + if (percpu_counter_read_positive(&vm_committed_as) < allowed) return 0; error: vm_unacct_memory(pages); @@ -2481,4 +2477,8 @@ void mm_drop_all_locks(struct mm_struct *mm) */ void __init mmap_init(void) { + int ret; + + ret = percpu_counter_init(&vm_committed_as, 0); + VM_BUG_ON(ret); } diff --git a/mm/nommu.c b/mm/nommu.c index 72eda4aee2cb..b571ef707428 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -62,11 +62,11 @@ void *high_memory; struct page *mem_map; unsigned long max_mapnr; unsigned long num_physpages; -atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0); +struct percpu_counter vm_committed_as; int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */ int sysctl_overcommit_ratio = 50; /* default is 50% */ int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT; -int sysctl_nr_trim_pages = 1; /* page trimming behaviour */ +int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS; int heap_stack_gap = 0; atomic_long_t mmap_pages_allocated; @@ -463,6 +463,10 @@ SYSCALL_DEFINE1(brk, unsigned long, brk) */ void __init mmap_init(void) { + int ret; + + ret = percpu_counter_init(&vm_committed_as, 0); + VM_BUG_ON(ret); vm_region_jar = KMEM_CACHE(vm_region, SLAB_PANIC); } @@ -511,8 +515,6 @@ static void add_nommu_region(struct vm_region *region) validate_nommu_regions(); - BUG_ON(region->vm_start & ~PAGE_MASK); - parent = NULL; p = &nommu_region_tree.rb_node; while (*p) { @@ -1847,12 +1849,9 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin) if (mm) allowed -= mm->total_vm / 32; - /* - * cast `allowed' as a signed long because vm_committed_space - * sometimes has a negative value - */ - if (atomic_long_read(&vm_committed_space) < (long)allowed) + if (percpu_counter_read_positive(&vm_committed_as) < allowed) return 0; + error: vm_unacct_memory(pages); diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 2f3166e308d9..92bcf1db16b2 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -514,34 +514,32 @@ void clear_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_mask) */ static void __out_of_memory(gfp_t gfp_mask, int order) { - if (sysctl_oom_kill_allocating_task) { - oom_kill_process(current, gfp_mask, order, 0, NULL, - "Out of memory (oom_kill_allocating_task)"); - - } else { - unsigned long points; - struct task_struct *p; - -retry: - /* - * Rambo mode: Shoot down a process and hope it solves whatever - * issues we may have. - */ - p = select_bad_process(&points, NULL); + struct task_struct *p; + unsigned long points; - if (PTR_ERR(p) == -1UL) + if (sysctl_oom_kill_allocating_task) + if (!oom_kill_process(current, gfp_mask, order, 0, NULL, + "Out of memory (oom_kill_allocating_task)")) return; +retry: + /* + * Rambo mode: Shoot down a process and hope it solves whatever + * issues we may have. + */ + p = select_bad_process(&points, NULL); - /* Found nothing?!?! Either we hang forever, or we panic. */ - if (!p) { - read_unlock(&tasklist_lock); - panic("Out of memory and no killable processes...\n"); - } + if (PTR_ERR(p) == -1UL) + return; - if (oom_kill_process(p, gfp_mask, order, points, NULL, - "Out of memory")) - goto retry; + /* Found nothing?!?! Either we hang forever, or we panic. */ + if (!p) { + read_unlock(&tasklist_lock); + panic("Out of memory and no killable processes...\n"); } + + if (oom_kill_process(p, gfp_mask, order, points, NULL, + "Out of memory")) + goto retry; } /* diff --git a/mm/page_alloc.c b/mm/page_alloc.c index e2f26991fff1..fe753ecf2aa5 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2681,6 +2681,7 @@ static void __meminit zone_init_free_lists(struct zone *zone) static int zone_batchsize(struct zone *zone) { +#ifdef CONFIG_MMU int batch; /* @@ -2706,9 +2707,26 @@ static int zone_batchsize(struct zone *zone) * of pages of one half of the possible page colors * and the other with pages of the other colors. */ - batch = (1 << (fls(batch + batch/2)-1)) - 1; + batch = rounddown_pow_of_two(batch + batch/2) - 1; return batch; + +#else + /* The deferral and batching of frees should be suppressed under NOMMU + * conditions. + * + * The problem is that NOMMU needs to be able to allocate large chunks + * of contiguous memory as there's no hardware page translation to + * assemble apparent contiguous memory from discontiguous pages. + * + * Queueing large contiguous runs of pages for batching, however, + * causes the pages to actually be freed in smaller chunks. As there + * can be a significant delay between the individual batches being + * recycled, this leads to the once large chunks of space being + * fragmented and becoming unavailable for high-order allocations. + */ + return 0; +#endif } static void setup_pageset(struct per_cpu_pageset *p, unsigned long batch) diff --git a/mm/shmem.c b/mm/shmem.c index f9cb20ebb990..b25f95ce3db7 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -1340,8 +1340,12 @@ repeat: shmem_swp_unmap(entry); spin_unlock(&info->lock); if (error == -ENOMEM) { - /* allow reclaim from this memory cgroup */ - error = mem_cgroup_shrink_usage(swappage, + /* + * reclaim from proper memory cgroup and + * call memcg's OOM if needed. + */ + error = mem_cgroup_shmem_charge_fallback( + swappage, current->mm, gfp); if (error) { diff --git a/mm/swap.c b/mm/swap.c index bede23ce64ea..cb29ae5d33ab 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -491,49 +491,6 @@ unsigned pagevec_lookup_tag(struct pagevec *pvec, struct address_space *mapping, EXPORT_SYMBOL(pagevec_lookup_tag); -#ifdef CONFIG_SMP -/* - * We tolerate a little inaccuracy to avoid ping-ponging the counter between - * CPUs - */ -#define ACCT_THRESHOLD max(16, NR_CPUS * 2) - -static DEFINE_PER_CPU(long, committed_space); - -void vm_acct_memory(long pages) -{ - long *local; - - preempt_disable(); - local = &__get_cpu_var(committed_space); - *local += pages; - if (*local > ACCT_THRESHOLD || *local < -ACCT_THRESHOLD) { - atomic_long_add(*local, &vm_committed_space); - *local = 0; - } - preempt_enable(); -} - -#ifdef CONFIG_HOTPLUG_CPU - -/* Drop the CPU's cached committed space back into the central pool. */ -static int cpu_swap_callback(struct notifier_block *nfb, - unsigned long action, - void *hcpu) -{ - long *committed; - - committed = &per_cpu(committed_space, (long)hcpu); - if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) { - atomic_long_add(*committed, &vm_committed_space); - *committed = 0; - drain_cpu_pagevecs((long)hcpu); - } - return NOTIFY_OK; -} -#endif /* CONFIG_HOTPLUG_CPU */ -#endif /* CONFIG_SMP */ - /* * Perform any setup for the swap system */ @@ -554,7 +511,4 @@ void __init swap_setup(void) * Right now other parts of the system means that we * _really_ don't want to cluster much more */ -#ifdef CONFIG_HOTPLUG_CPU - hotcpu_notifier(cpu_swap_callback, 0); -#endif } diff --git a/mm/vmalloc.c b/mm/vmalloc.c index fab19876b4d1..083716ea38c9 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -402,6 +402,7 @@ overflow: printk(KERN_WARNING "vmap allocation for size %lu failed: " "use vmalloc=<size> to increase size.\n", size); + kfree(va); return ERR_PTR(-EBUSY); } diff --git a/mm/vmscan.c b/mm/vmscan.c index eac9577941f9..5fa3eda1f03f 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1471,7 +1471,7 @@ static void shrink_zone(int priority, struct zone *zone, for_each_evictable_lru(l) { int file = is_file_lru(l); - int scan; + unsigned long scan; scan = zone_nr_pages(zone, sc, l); if (priority) { diff --git a/net/9p/client.c b/net/9p/client.c index 1eb580c38fbb..dd43a8289b0d 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -203,7 +203,6 @@ static struct p9_req_t *p9_tag_alloc(struct p9_client *c, u16 tag) p9pdu_reset(req->tc); p9pdu_reset(req->rc); - req->flush_tag = 0; req->tc->tag = tag-1; req->status = REQ_STATUS_ALLOC; @@ -324,35 +323,9 @@ static void p9_free_req(struct p9_client *c, struct p9_req_t *r) */ void p9_client_cb(struct p9_client *c, struct p9_req_t *req) { - struct p9_req_t *other_req; - unsigned long flags; - P9_DPRINTK(P9_DEBUG_MUX, " tag %d\n", req->tc->tag); - - if (req->status == REQ_STATUS_ERROR) - wake_up(req->wq); - - if (req->flush_tag) { /* flush receive path */ - P9_DPRINTK(P9_DEBUG_9P, "<<< RFLUSH %d\n", req->tc->tag); - spin_lock_irqsave(&c->lock, flags); - other_req = p9_tag_lookup(c, req->flush_tag); - if (other_req->status != REQ_STATUS_FLSH) /* stale flush */ - spin_unlock_irqrestore(&c->lock, flags); - else { - other_req->status = REQ_STATUS_FLSHD; - spin_unlock_irqrestore(&c->lock, flags); - wake_up(other_req->wq); - } - p9_free_req(c, req); - } else { /* normal receive path */ - P9_DPRINTK(P9_DEBUG_MUX, "normal: tag %d\n", req->tc->tag); - spin_lock_irqsave(&c->lock, flags); - if (req->status != REQ_STATUS_FLSHD) - req->status = REQ_STATUS_RCVD; - spin_unlock_irqrestore(&c->lock, flags); - wake_up(req->wq); - P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag); - } + wake_up(req->wq); + P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag); } EXPORT_SYMBOL(p9_client_cb); @@ -486,9 +459,15 @@ static int p9_client_flush(struct p9_client *c, struct p9_req_t *oldreq) if (IS_ERR(req)) return PTR_ERR(req); - req->flush_tag = oldtag; - /* we don't free anything here because RPC isn't complete */ + /* if we haven't received a response for oldreq, + remove it from the list. */ + spin_lock(&c->lock); + if (oldreq->status == REQ_STATUS_FLSH) + list_del(&oldreq->req_list); + spin_unlock(&c->lock); + + p9_free_req(c, req); return 0; } @@ -509,7 +488,6 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...) struct p9_req_t *req; unsigned long flags; int sigpending; - int flushed = 0; P9_DPRINTK(P9_DEBUG_MUX, "client %p op %d\n", c, type); @@ -546,42 +524,28 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...) goto reterr; } - /* if it was a flush we just transmitted, return our tag */ - if (type == P9_TFLUSH) - return req; -again: P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d\n", req->wq, tag); err = wait_event_interruptible(*req->wq, req->status >= REQ_STATUS_RCVD); - P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d (flushed=%d)\n", - req->wq, tag, err, flushed); + P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d\n", + req->wq, tag, err); if (req->status == REQ_STATUS_ERROR) { P9_DPRINTK(P9_DEBUG_ERROR, "req_status error %d\n", req->t_err); err = req->t_err; - } else if (err == -ERESTARTSYS && flushed) { - P9_DPRINTK(P9_DEBUG_MUX, "flushed - going again\n"); - goto again; - } else if (req->status == REQ_STATUS_FLSHD) { - P9_DPRINTK(P9_DEBUG_MUX, "flushed - erestartsys\n"); - err = -ERESTARTSYS; } - if ((err == -ERESTARTSYS) && (c->status == Connected) && (!flushed)) { + if ((err == -ERESTARTSYS) && (c->status == Connected)) { P9_DPRINTK(P9_DEBUG_MUX, "flushing\n"); - spin_lock_irqsave(&c->lock, flags); - if (req->status == REQ_STATUS_SENT) - req->status = REQ_STATUS_FLSH; - spin_unlock_irqrestore(&c->lock, flags); sigpending = 1; - flushed = 1; clear_thread_flag(TIF_SIGPENDING); - if (c->trans_mod->cancel(c, req)) { - err = p9_client_flush(c, req); - if (err == 0) - goto again; - } + if (c->trans_mod->cancel(c, req)) + p9_client_flush(c, req); + + /* if we received the response anyway, don't signal error */ + if (req->status == REQ_STATUS_RCVD) + err = 0; } if (sigpending) { @@ -1244,19 +1208,53 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid) ret->name, ret->uid, ret->gid, ret->muid, ret->extension, ret->n_uid, ret->n_gid, ret->n_muid); + p9_free_req(clnt, req); + return ret; + free_and_error: p9_free_req(clnt, req); error: - return ret; + kfree(ret); + return ERR_PTR(err); } EXPORT_SYMBOL(p9_client_stat); +static int p9_client_statsize(struct p9_wstat *wst, int optional) +{ + int ret; + + /* size[2] type[2] dev[4] qid[13] */ + /* mode[4] atime[4] mtime[4] length[8]*/ + /* name[s] uid[s] gid[s] muid[s] */ + ret = 2+2+4+13+4+4+4+8+2+2+2+2; + + if (wst->name) + ret += strlen(wst->name); + if (wst->uid) + ret += strlen(wst->uid); + if (wst->gid) + ret += strlen(wst->gid); + if (wst->muid) + ret += strlen(wst->muid); + + if (optional) { + ret += 2+4+4+4; /* extension[s] n_uid[4] n_gid[4] n_muid[4] */ + if (wst->extension) + ret += strlen(wst->extension); + } + + return ret; +} + int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst) { int err; struct p9_req_t *req; struct p9_client *clnt; + err = 0; + clnt = fid->clnt; + wst->size = p9_client_statsize(wst, clnt->dotu); P9_DPRINTK(P9_DEBUG_9P, ">>> TWSTAT fid %d\n", fid->fid); P9_DPRINTK(P9_DEBUG_9P, " sz=%x type=%x dev=%x qid=%x.%llx.%x\n" @@ -1268,10 +1266,8 @@ int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst) wst->atime, wst->mtime, (unsigned long long)wst->length, wst->name, wst->uid, wst->gid, wst->muid, wst->extension, wst->n_uid, wst->n_gid, wst->n_muid); - err = 0; - clnt = fid->clnt; - req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, 0, wst); + req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size, wst); if (IS_ERR(req)) { err = PTR_ERR(req); goto error; diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index c613ed08a5ee..a2a1814c7a8d 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -213,8 +213,8 @@ static void p9_conn_cancel(struct p9_conn *m, int err) spin_unlock_irqrestore(&m->client->lock, flags); list_for_each_entry_safe(req, rtmp, &cancel_list, req_list) { - list_del(&req->req_list); P9_DPRINTK(P9_DEBUG_ERROR, "call back req %p\n", req); + list_del(&req->req_list); p9_client_cb(m->client, req); } } @@ -336,7 +336,8 @@ static void p9_read_work(struct work_struct *work) "mux %p pkt: size: %d bytes tag: %d\n", m, n, tag); m->req = p9_tag_lookup(m->client, tag); - if (!m->req) { + if (!m->req || (m->req->status != REQ_STATUS_SENT && + m->req->status != REQ_STATUS_FLSH)) { P9_DPRINTK(P9_DEBUG_ERROR, "Unexpected packet tag %d\n", tag); err = -EIO; @@ -361,10 +362,11 @@ static void p9_read_work(struct work_struct *work) if ((m->req) && (m->rpos == m->rsize)) { /* packet is read in */ P9_DPRINTK(P9_DEBUG_TRANS, "got new packet\n"); spin_lock(&m->client->lock); + if (m->req->status != REQ_STATUS_ERROR) + m->req->status = REQ_STATUS_RCVD; list_del(&m->req->req_list); spin_unlock(&m->client->lock); p9_client_cb(m->client, m->req); - m->rbuf = NULL; m->rpos = 0; m->rsize = 0; @@ -454,6 +456,7 @@ static void p9_write_work(struct work_struct *work) req = list_entry(m->unsent_req_list.next, struct p9_req_t, req_list); req->status = REQ_STATUS_SENT; + P9_DPRINTK(P9_DEBUG_TRANS, "move req %p\n", req); list_move_tail(&req->req_list, &m->req_list); m->wbuf = req->tc->sdata; @@ -683,12 +686,13 @@ static int p9_fd_cancel(struct p9_client *client, struct p9_req_t *req) P9_DPRINTK(P9_DEBUG_TRANS, "client %p req %p\n", client, req); spin_lock(&client->lock); - list_del(&req->req_list); if (req->status == REQ_STATUS_UNSENT) { + list_del(&req->req_list); req->status = REQ_STATUS_FLSHD; ret = 0; - } + } else if (req->status == REQ_STATUS_SENT) + req->status = REQ_STATUS_FLSH; spin_unlock(&client->lock); diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c index 7fa0eb20b2f6..ac4990041ebb 100644 --- a/net/9p/trans_rdma.c +++ b/net/9p/trans_rdma.c @@ -295,6 +295,7 @@ handle_recv(struct p9_client *client, struct p9_trans_rdma *rdma, goto err_out; req->rc = c->rc; + req->status = REQ_STATUS_RCVD; p9_client_cb(client, req); return; diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index 2d7781ec663b..bb8579a141a8 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -134,6 +134,7 @@ static void req_done(struct virtqueue *vq) P9_DPRINTK(P9_DEBUG_TRANS, ": rc %p\n", rc); P9_DPRINTK(P9_DEBUG_TRANS, ": lookup tag %d\n", rc->tag); req = p9_tag_lookup(chan->client, rc->tag); + req->status = REQ_STATUS_RCVD; p9_client_cb(chan->client, req); } } diff --git a/net/atm/br2684.c b/net/atm/br2684.c index 334fcd4a4ea4..3100a8940afc 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -549,6 +549,7 @@ static void br2684_setup(struct net_device *netdev) struct br2684_dev *brdev = BRPRIV(netdev); ether_setup(netdev); + brdev->net_dev = netdev; netdev->netdev_ops = &br2684_netdev_ops; diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 375f4b4f7f79..61309b26f271 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -248,6 +248,8 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst) if (hdev->notify) hdev->notify(hdev, HCI_NOTIFY_CONN_ADD); + hci_conn_init_sysfs(conn); + tasklet_enable(&hdev->tx_task); return conn; diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index b7c51082ddeb..582d8877078c 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -9,7 +9,7 @@ struct class *bt_class = NULL; EXPORT_SYMBOL_GPL(bt_class); -static struct workqueue_struct *bluetooth; +static struct workqueue_struct *bt_workq; static inline char *link_typetostr(int type) { @@ -89,8 +89,8 @@ static void add_conn(struct work_struct *work) { struct hci_conn *conn = container_of(work, struct hci_conn, work_add); - /* ensure previous add/del is complete */ - flush_workqueue(bluetooth); + /* ensure previous del is complete */ + flush_work(&conn->work_del); if (device_add(&conn->dev) < 0) { BT_ERR("Failed to register connection device"); @@ -98,27 +98,6 @@ static void add_conn(struct work_struct *work) } } -void hci_conn_add_sysfs(struct hci_conn *conn) -{ - struct hci_dev *hdev = conn->hdev; - - BT_DBG("conn %p", conn); - - conn->dev.type = &bt_link; - conn->dev.class = bt_class; - conn->dev.parent = &hdev->dev; - - dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle); - - dev_set_drvdata(&conn->dev, conn); - - device_initialize(&conn->dev); - - INIT_WORK(&conn->work_add, add_conn); - - queue_work(bluetooth, &conn->work_add); -} - /* * The rfcomm tty device will possibly retain even when conn * is down, and sysfs doesn't support move zombie device, @@ -134,8 +113,11 @@ static void del_conn(struct work_struct *work) struct hci_conn *conn = container_of(work, struct hci_conn, work_del); struct hci_dev *hdev = conn->hdev; - /* ensure previous add/del is complete */ - flush_workqueue(bluetooth); + /* ensure previous add is complete */ + flush_work(&conn->work_add); + + if (!device_is_registered(&conn->dev)) + return; while (1) { struct device *dev; @@ -152,16 +134,40 @@ static void del_conn(struct work_struct *work) hci_dev_put(hdev); } -void hci_conn_del_sysfs(struct hci_conn *conn) +void hci_conn_init_sysfs(struct hci_conn *conn) { + struct hci_dev *hdev = conn->hdev; + BT_DBG("conn %p", conn); - if (!device_is_registered(&conn->dev)) - return; + conn->dev.type = &bt_link; + conn->dev.class = bt_class; + conn->dev.parent = &hdev->dev; + + dev_set_drvdata(&conn->dev, conn); + device_initialize(&conn->dev); + + INIT_WORK(&conn->work_add, add_conn); INIT_WORK(&conn->work_del, del_conn); +} + +void hci_conn_add_sysfs(struct hci_conn *conn) +{ + struct hci_dev *hdev = conn->hdev; + + BT_DBG("conn %p", conn); + + dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle); + + queue_work(bt_workq, &conn->work_add); +} + +void hci_conn_del_sysfs(struct hci_conn *conn) +{ + BT_DBG("conn %p", conn); - queue_work(bluetooth, &conn->work_del); + queue_work(bt_workq, &conn->work_del); } static inline char *host_typetostr(int type) @@ -438,13 +444,13 @@ void hci_unregister_sysfs(struct hci_dev *hdev) int __init bt_sysfs_init(void) { - bluetooth = create_singlethread_workqueue("bluetooth"); - if (!bluetooth) + bt_workq = create_singlethread_workqueue("bluetooth"); + if (!bt_workq) return -ENOMEM; bt_class = class_create(THIS_MODULE, "bluetooth"); if (IS_ERR(bt_class)) { - destroy_workqueue(bluetooth); + destroy_workqueue(bt_workq); return PTR_ERR(bt_class); } @@ -453,7 +459,7 @@ int __init bt_sysfs_init(void) void bt_sysfs_cleanup(void) { - destroy_workqueue(bluetooth); + destroy_workqueue(bt_workq); class_destroy(bt_class); } diff --git a/net/core/dev.c b/net/core/dev.c index 308a7d0c277f..e2e9e4af3ace 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1735,11 +1735,12 @@ u16 skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb) { u32 hash; - if (skb_rx_queue_recorded(skb)) { - hash = skb_get_rx_queue(skb); - } else if (skb->sk && skb->sk->sk_hash) { + if (skb_rx_queue_recorded(skb)) + return skb_get_rx_queue(skb) % dev->real_num_tx_queues; + + if (skb->sk && skb->sk->sk_hash) hash = skb->sk->sk_hash; - } else + else hash = skb->protocol; hash = jhash_1word(hash, skb_tx_hashrnd); diff --git a/net/core/skbuff.c b/net/core/skbuff.c index ce6356cd9f71..f091a5a845c1 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1365,9 +1365,8 @@ static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i) static inline struct page *linear_to_page(struct page *page, unsigned int *len, unsigned int *offset, - struct sk_buff *skb) + struct sk_buff *skb, struct sock *sk) { - struct sock *sk = skb->sk; struct page *p = sk->sk_sndmsg_page; unsigned int off; @@ -1405,13 +1404,14 @@ new_page: */ static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page, unsigned int *len, unsigned int offset, - struct sk_buff *skb, int linear) + struct sk_buff *skb, int linear, + struct sock *sk) { if (unlikely(spd->nr_pages == PIPE_BUFFERS)) return 1; if (linear) { - page = linear_to_page(page, len, &offset, skb); + page = linear_to_page(page, len, &offset, skb, sk); if (!page) return 1; } else @@ -1442,7 +1442,8 @@ static inline void __segment_seek(struct page **page, unsigned int *poff, static inline int __splice_segment(struct page *page, unsigned int poff, unsigned int plen, unsigned int *off, unsigned int *len, struct sk_buff *skb, - struct splice_pipe_desc *spd, int linear) + struct splice_pipe_desc *spd, int linear, + struct sock *sk) { if (!*len) return 1; @@ -1465,7 +1466,7 @@ static inline int __splice_segment(struct page *page, unsigned int poff, /* the linear region may spread across several pages */ flen = min_t(unsigned int, flen, PAGE_SIZE - poff); - if (spd_fill_page(spd, page, &flen, poff, skb, linear)) + if (spd_fill_page(spd, page, &flen, poff, skb, linear, sk)) return 1; __segment_seek(&page, &poff, &plen, flen); @@ -1481,8 +1482,8 @@ static inline int __splice_segment(struct page *page, unsigned int poff, * pipe is full or if we already spliced the requested length. */ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, - unsigned int *len, - struct splice_pipe_desc *spd) + unsigned int *len, struct splice_pipe_desc *spd, + struct sock *sk) { int seg; @@ -1492,7 +1493,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, if (__splice_segment(virt_to_page(skb->data), (unsigned long) skb->data & (PAGE_SIZE - 1), skb_headlen(skb), - offset, len, skb, spd, 1)) + offset, len, skb, spd, 1, sk)) return 1; /* @@ -1502,7 +1503,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, const skb_frag_t *f = &skb_shinfo(skb)->frags[seg]; if (__splice_segment(f->page, f->page_offset, f->size, - offset, len, skb, spd, 0)) + offset, len, skb, spd, 0, sk)) return 1; } @@ -1528,12 +1529,13 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset, .ops = &sock_pipe_buf_ops, .spd_release = sock_spd_release, }; + struct sock *sk = skb->sk; /* * __skb_splice_bits() only fails if the output has no room left, * so no point in going over the frag_list for the error case. */ - if (__skb_splice_bits(skb, &offset, &tlen, &spd)) + if (__skb_splice_bits(skb, &offset, &tlen, &spd, sk)) goto done; else if (!tlen) goto done; @@ -1545,14 +1547,13 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset, struct sk_buff *list = skb_shinfo(skb)->frag_list; for (; list && tlen; list = list->next) { - if (__skb_splice_bits(list, &offset, &tlen, &spd)) + if (__skb_splice_bits(list, &offset, &tlen, &spd, sk)) break; } } done: if (spd.nr_pages) { - struct sock *sk = skb->sk; int ret; /* diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index c96a6bb25430..eec3e6f9956c 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -597,16 +597,6 @@ static void tcp_event_data_recv(struct sock *sk, struct sk_buff *skb) tcp_grow_window(sk, skb); } -static u32 tcp_rto_min(struct sock *sk) -{ - struct dst_entry *dst = __sk_dst_get(sk); - u32 rto_min = TCP_RTO_MIN; - - if (dst && dst_metric_locked(dst, RTAX_RTO_MIN)) - rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN); - return rto_min; -} - /* Called to compute a smoothed rtt estimate. The data fed to this * routine either comes from timestamps, or from segments that were * known _not_ to have been retransmitted [see Karn/Partridge diff --git a/net/mac80211/main.c b/net/mac80211/main.c index fbcbed6cad01..14134193cd17 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -757,6 +757,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, local->hw.conf.long_frame_max_tx_count = 4; local->hw.conf.short_frame_max_tx_count = 7; local->hw.conf.radio_enabled = true; + local->user_power_level = -1; INIT_LIST_HEAD(&local->interfaces); mutex_init(&local->iflist_mtx); @@ -909,6 +910,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) if (result < 0) goto fail_sta_info; + result = ieee80211_wep_init(local); + if (result < 0) { + printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", + wiphy_name(local->hw.wiphy), result); + goto fail_wep; + } + rtnl_lock(); result = dev_alloc_name(local->mdev, local->mdev->name); if (result < 0) @@ -930,14 +938,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) goto fail_rate; } - result = ieee80211_wep_init(local); - - if (result < 0) { - printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", - wiphy_name(local->hw.wiphy), result); - goto fail_wep; - } - /* add one default STA interface if supported */ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) { result = ieee80211_if_add(local, "wlan%d", NULL, @@ -967,13 +967,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) return 0; -fail_wep: - rate_control_deinitialize(local); fail_rate: unregister_netdevice(local->mdev); local->mdev = NULL; fail_dev: rtnl_unlock(); + ieee80211_wep_free(local); +fail_wep: sta_info_stop(local); fail_sta_info: debugfs_hw_del(local); diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 881203c4a142..cb3ad741ebf8 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -837,6 +837,7 @@ config NETFILTER_XT_MATCH_SOCKET depends on NETFILTER_TPROXY depends on NETFILTER_XTABLES depends on NETFILTER_ADVANCED + depends on !NF_CONNTRACK || NF_CONNTRACK select NF_DEFRAG_IPV4 help This option adds a `socket' match, which can be used to match diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 173fcc4b050d..0759f32e9dca 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -254,7 +254,7 @@ replay: } tp->ops = tp_ops; tp->protocol = protocol; - tp->prio = nprio ? : tcf_auto_prio(*back); + tp->prio = nprio ? : TC_H_MAJ(tcf_auto_prio(*back)); tp->q = q; tp->classify = tp_ops->classify; tp->classid = parent; diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index a0bfe53f1621..06ca058572f2 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -672,10 +672,8 @@ xprt_init_autodisconnect(unsigned long data) if (test_and_set_bit(XPRT_LOCKED, &xprt->state)) goto out_abort; spin_unlock(&xprt->transport_lock); - if (xprt_connecting(xprt)) - xprt_release_write(xprt, NULL); - else - queue_work(rpciod_workqueue, &xprt->task_cleanup); + set_bit(XPRT_CONNECTION_CLOSE, &xprt->state); + queue_work(rpciod_workqueue, &xprt->task_cleanup); return; out_abort: spin_unlock(&xprt->transport_lock); diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index d40ff50887aa..e18596146013 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -807,6 +807,9 @@ static void xs_reset_transport(struct sock_xprt *transport) * * This is used when all requests are complete; ie, no DRC state remains * on the server we want to save. + * + * The caller _must_ be holding XPRT_LOCKED in order to avoid issues with + * xs_reset_transport() zeroing the socket from underneath a writer. */ static void xs_close(struct rpc_xprt *xprt) { @@ -824,6 +827,14 @@ static void xs_close(struct rpc_xprt *xprt) xprt_disconnect_done(xprt); } +static void xs_tcp_close(struct rpc_xprt *xprt) +{ + if (test_and_clear_bit(XPRT_CONNECTION_CLOSE, &xprt->state)) + xs_close(xprt); + else + xs_tcp_shutdown(xprt); +} + /** * xs_destroy - prepare to shutdown a transport * @xprt: doomed transport @@ -1772,6 +1783,15 @@ static void xs_tcp_setup_socket(struct rpc_xprt *xprt, xprt, -status, xprt_connected(xprt), sock->sk->sk_state); switch (status) { + default: + printk("%s: connect returned unhandled error %d\n", + __func__, status); + case -EADDRNOTAVAIL: + /* We're probably in TIME_WAIT. Get rid of existing socket, + * and retry + */ + set_bit(XPRT_CONNECTION_CLOSE, &xprt->state); + xprt_force_disconnect(xprt); case -ECONNREFUSED: case -ECONNRESET: case -ENETUNREACH: @@ -1782,10 +1802,6 @@ static void xs_tcp_setup_socket(struct rpc_xprt *xprt, xprt_clear_connecting(xprt); return; } - /* get rid of existing socket, and retry */ - xs_tcp_shutdown(xprt); - printk("%s: connect returned unhandled error %d\n", - __func__, status); out_eagain: status = -EAGAIN; out: @@ -1994,7 +2010,7 @@ static struct rpc_xprt_ops xs_tcp_ops = { .buf_free = rpc_free, .send_request = xs_tcp_send_request, .set_retrans_timeout = xprt_set_retrans_timeout_def, - .close = xs_tcp_shutdown, + .close = xs_tcp_close, .destroy = xs_destroy, .print_stats = xs_tcp_print_stats, }; diff --git a/scripts/Makefile b/scripts/Makefile index aafdf064feef..9dd5b25a1d53 100644 --- a/scripts/Makefile +++ b/scripts/Makefile @@ -21,6 +21,7 @@ hostprogs-y += unifdef subdir-$(CONFIG_MODVERSIONS) += genksyms subdir-y += mod subdir-$(CONFIG_SECURITY_SELINUX) += selinux +subdir-$(CONFIG_DTC) += dtc # Let clean descend into subdirs subdir- += basic kconfig package selinux diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile new file mode 100644 index 000000000000..01cdb36fc583 --- /dev/null +++ b/scripts/dtc/Makefile @@ -0,0 +1,54 @@ +# scripts/dtc makefile + +hostprogs-y := dtc +always := $(hostprogs-y) + +dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \ + srcpos.o checks.o +dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o + +# Source files need to get at the userspace version of libfdt_env.h to compile + +HOSTCFLAGS_DTC := -I$(src) -I$(src)/libfdt + +HOSTCFLAGS_checks.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_data.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_dtc.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_flattree.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_fstree.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_livetree.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_srcpos.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_treesource.o := $(HOSTCFLAGS_DTC) + +HOSTCFLAGS_dtc-lexer.lex.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_dtc-parser.tab.o := $(HOSTCFLAGS_DTC) + +# dependencies on generated files need to be listed explicitly +$(obj)/dtc-parser.tab.o: $(obj)/dtc-parser.tab.c $(obj)/dtc-parser.tab.h +$(obj)/dtc-lexer.lex.o: $(obj)/dtc-lexer.lex.c $(obj)/dtc-parser.tab.h + +targets += dtc-parser.tab.c dtc-lexer.lex.c + +clean-files += dtc-parser.tab.h + +# GENERATE_PARSER := 1 # Uncomment to rebuild flex/bison output + +ifdef GENERATE_PARSER + +BISON = bison +FLEX = flex + +quiet_cmd_bison = BISON $@ + cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped +quiet_cmd_flex = FLEX $@ + cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped + +$(obj)/dtc-parser.tab.c: $(src)/dtc-parser.y FORCE + $(call if_changed,bison) + +$(obj)/dtc-parser.tab.h: $(obj)/dtc-parser.tab.c + +$(obj)/dtc-lexer.lex.c: $(src)/dtc-lexer.l FORCE + $(call if_changed,flex) + +endif diff --git a/arch/powerpc/boot/dtc-src/Makefile.dtc b/scripts/dtc/Makefile.dtc index 6ddf9ecac669..6ddf9ecac669 100644 --- a/arch/powerpc/boot/dtc-src/Makefile.dtc +++ b/scripts/dtc/Makefile.dtc diff --git a/arch/powerpc/boot/dtc-src/checks.c b/scripts/dtc/checks.c index 95485796f253..95485796f253 100644 --- a/arch/powerpc/boot/dtc-src/checks.c +++ b/scripts/dtc/checks.c diff --git a/arch/powerpc/boot/dtc-src/data.c b/scripts/dtc/data.c index dd2e3d39d4c1..dd2e3d39d4c1 100644 --- a/arch/powerpc/boot/dtc-src/data.c +++ b/scripts/dtc/data.c diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.l b/scripts/dtc/dtc-lexer.l index 44dbfd3f0976..44dbfd3f0976 100644 --- a/arch/powerpc/boot/dtc-src/dtc-lexer.l +++ b/scripts/dtc/dtc-lexer.l diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped index ac392cb040f6..ac392cb040f6 100644 --- a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped +++ b/scripts/dtc/dtc-lexer.lex.c_shipped diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped b/scripts/dtc/dtc-parser.tab.c_shipped index 27129377e5d2..27129377e5d2 100644 --- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped +++ b/scripts/dtc/dtc-parser.tab.c_shipped diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped b/scripts/dtc/dtc-parser.tab.h_shipped index ba99100d55c9..ba99100d55c9 100644 --- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped +++ b/scripts/dtc/dtc-parser.tab.h_shipped diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.y b/scripts/dtc/dtc-parser.y index b2ab562420ea..b2ab562420ea 100644 --- a/arch/powerpc/boot/dtc-src/dtc-parser.y +++ b/scripts/dtc/dtc-parser.y diff --git a/arch/powerpc/boot/dtc-src/dtc.c b/scripts/dtc/dtc.c index d8fd43b4ac1a..d8fd43b4ac1a 100644 --- a/arch/powerpc/boot/dtc-src/dtc.c +++ b/scripts/dtc/dtc.c diff --git a/arch/powerpc/boot/dtc-src/dtc.h b/scripts/dtc/dtc.h index 08d54c870086..08d54c870086 100644 --- a/arch/powerpc/boot/dtc-src/dtc.h +++ b/scripts/dtc/dtc.h diff --git a/arch/powerpc/boot/dtc-src/flattree.c b/scripts/dtc/flattree.c index 76acd28c068d..76acd28c068d 100644 --- a/arch/powerpc/boot/dtc-src/flattree.c +++ b/scripts/dtc/flattree.c diff --git a/arch/powerpc/boot/dtc-src/fstree.c b/scripts/dtc/fstree.c index 766b2694d935..766b2694d935 100644 --- a/arch/powerpc/boot/dtc-src/fstree.c +++ b/scripts/dtc/fstree.c diff --git a/arch/powerpc/boot/libfdt/Makefile.libfdt b/scripts/dtc/libfdt/Makefile.libfdt index 6c42acfa21ec..6c42acfa21ec 100644 --- a/arch/powerpc/boot/libfdt/Makefile.libfdt +++ b/scripts/dtc/libfdt/Makefile.libfdt diff --git a/arch/powerpc/boot/libfdt/fdt.c b/scripts/dtc/libfdt/fdt.c index 2acaec5923ae..2acaec5923ae 100644 --- a/arch/powerpc/boot/libfdt/fdt.c +++ b/scripts/dtc/libfdt/fdt.c diff --git a/arch/powerpc/boot/libfdt/fdt.h b/scripts/dtc/libfdt/fdt.h index 48ccfd910000..48ccfd910000 100644 --- a/arch/powerpc/boot/libfdt/fdt.h +++ b/scripts/dtc/libfdt/fdt.h diff --git a/arch/powerpc/boot/libfdt/fdt_ro.c b/scripts/dtc/libfdt/fdt_ro.c index fbbba44fcd0d..fbbba44fcd0d 100644 --- a/arch/powerpc/boot/libfdt/fdt_ro.c +++ b/scripts/dtc/libfdt/fdt_ro.c diff --git a/arch/powerpc/boot/libfdt/fdt_rw.c b/scripts/dtc/libfdt/fdt_rw.c index 8e7ec4cb7bcd..8e7ec4cb7bcd 100644 --- a/arch/powerpc/boot/libfdt/fdt_rw.c +++ b/scripts/dtc/libfdt/fdt_rw.c diff --git a/arch/powerpc/boot/libfdt/fdt_strerror.c b/scripts/dtc/libfdt/fdt_strerror.c index e6c3ceee8c58..e6c3ceee8c58 100644 --- a/arch/powerpc/boot/libfdt/fdt_strerror.c +++ b/scripts/dtc/libfdt/fdt_strerror.c diff --git a/arch/powerpc/boot/libfdt/fdt_sw.c b/scripts/dtc/libfdt/fdt_sw.c index 698329e0ccaf..698329e0ccaf 100644 --- a/arch/powerpc/boot/libfdt/fdt_sw.c +++ b/scripts/dtc/libfdt/fdt_sw.c diff --git a/arch/powerpc/boot/libfdt/fdt_wip.c b/scripts/dtc/libfdt/fdt_wip.c index a4652c6e787e..a4652c6e787e 100644 --- a/arch/powerpc/boot/libfdt/fdt_wip.c +++ b/scripts/dtc/libfdt/fdt_wip.c diff --git a/arch/powerpc/boot/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h index ce80e4fb41b2..ce80e4fb41b2 100644 --- a/arch/powerpc/boot/libfdt/libfdt.h +++ b/scripts/dtc/libfdt/libfdt.h diff --git a/arch/powerpc/boot/dtc-src/libfdt_env.h b/scripts/dtc/libfdt/libfdt_env.h index 449bf602daf1..449bf602daf1 100644 --- a/arch/powerpc/boot/dtc-src/libfdt_env.h +++ b/scripts/dtc/libfdt/libfdt_env.h diff --git a/arch/powerpc/boot/libfdt/libfdt_internal.h b/scripts/dtc/libfdt/libfdt_internal.h index 46eb93e4af5c..46eb93e4af5c 100644 --- a/arch/powerpc/boot/libfdt/libfdt_internal.h +++ b/scripts/dtc/libfdt/libfdt_internal.h diff --git a/arch/powerpc/boot/dtc-src/livetree.c b/scripts/dtc/livetree.c index 0ca3de550b3f..0ca3de550b3f 100644 --- a/arch/powerpc/boot/dtc-src/livetree.c +++ b/scripts/dtc/livetree.c diff --git a/arch/powerpc/boot/dtc-src/srcpos.c b/scripts/dtc/srcpos.c index 9641b7628b4d..9641b7628b4d 100644 --- a/arch/powerpc/boot/dtc-src/srcpos.c +++ b/scripts/dtc/srcpos.c diff --git a/arch/powerpc/boot/dtc-src/srcpos.h b/scripts/dtc/srcpos.h index e17c7c04db8e..e17c7c04db8e 100644 --- a/arch/powerpc/boot/dtc-src/srcpos.h +++ b/scripts/dtc/srcpos.h diff --git a/arch/powerpc/boot/dtc-src/treesource.c b/scripts/dtc/treesource.c index ebeb6eb27907..ebeb6eb27907 100644 --- a/arch/powerpc/boot/dtc-src/treesource.c +++ b/scripts/dtc/treesource.c diff --git a/arch/powerpc/boot/dtc-src/version_gen.h b/scripts/dtc/version_gen.h index 658ff42429d6..658ff42429d6 100644 --- a/arch/powerpc/boot/dtc-src/version_gen.h +++ b/scripts/dtc/version_gen.h diff --git a/scripts/kernel-doc b/scripts/kernel-doc index 0f11870116dc..3208a3a7e7fe 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -1411,7 +1411,8 @@ sub dump_struct($$) { my $file = shift; my $nested; - if ($x =~/(struct|union)\s+(\w+)\s*{(.*)}/) { + if ($x =~ /(struct|union)\s+(\w+)\s*{(.*)}/) { + #my $decl_type = $1; $declaration_name = $2; my $members = $3; @@ -1420,8 +1421,8 @@ sub dump_struct($$) { $nested = $1; # ignore members marked private: - $members =~ s/\/\*.*?private:.*?public:.*?\*\///gos; - $members =~ s/\/\*.*?private:.*//gos; + $members =~ s/\/\*\s*private:.*?\/\*\s*public:.*?\*\///gos; + $members =~ s/\/\*\s*private:.*//gos; # strip comments: $members =~ s/\/\*.*?\*\///gos; $nested =~ s/\/\*.*?\*\///gos; diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 8d46ea7d6715..161b7846733e 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -384,11 +384,19 @@ static int parse_elf(struct elf_info *info, const char *filename) return 0; } /* Fix endianness in ELF header */ - hdr->e_shoff = TO_NATIVE(hdr->e_shoff); - hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx); - hdr->e_shnum = TO_NATIVE(hdr->e_shnum); - hdr->e_machine = TO_NATIVE(hdr->e_machine); - hdr->e_type = TO_NATIVE(hdr->e_type); + hdr->e_type = TO_NATIVE(hdr->e_type); + hdr->e_machine = TO_NATIVE(hdr->e_machine); + hdr->e_version = TO_NATIVE(hdr->e_version); + hdr->e_entry = TO_NATIVE(hdr->e_entry); + hdr->e_phoff = TO_NATIVE(hdr->e_phoff); + hdr->e_shoff = TO_NATIVE(hdr->e_shoff); + hdr->e_flags = TO_NATIVE(hdr->e_flags); + hdr->e_ehsize = TO_NATIVE(hdr->e_ehsize); + hdr->e_phentsize = TO_NATIVE(hdr->e_phentsize); + hdr->e_phnum = TO_NATIVE(hdr->e_phnum); + hdr->e_shentsize = TO_NATIVE(hdr->e_shentsize); + hdr->e_shnum = TO_NATIVE(hdr->e_shnum); + hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx); sechdrs = (void *)hdr + hdr->e_shoff; info->sechdrs = sechdrs; @@ -402,13 +410,16 @@ static int parse_elf(struct elf_info *info, const char *filename) /* Fix endianness in section headers */ for (i = 0; i < hdr->e_shnum; i++) { - sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type); - sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset); - sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size); - sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link); - sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name); - sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info); - sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr); + sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name); + sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type); + sechdrs[i].sh_flags = TO_NATIVE(sechdrs[i].sh_flags); + sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr); + sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset); + sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size); + sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link); + sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info); + sechdrs[i].sh_addralign = TO_NATIVE(sechdrs[i].sh_addralign); + sechdrs[i].sh_entsize = TO_NATIVE(sechdrs[i].sh_entsize); } /* Find symbol table. */ for (i = 1; i < hdr->e_shnum; i++) { @@ -716,41 +727,37 @@ int match(const char *sym, const char * const pat[]) /* sections that we do not want to do full section mismatch check on */ static const char *section_white_list[] = - { ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL }; +{ + ".comment*", + ".debug*", + ".mdebug*", /* alpha, score, mips etc. */ + ".pdr", /* alpha, score, mips etc. */ + ".stab*", + ".note*", + ".got*", + ".toc*", + NULL +}; /* - * Is this section one we do not want to check? - * This is often debug sections. - * If we are going to check this section then - * test if section name ends with a dot and a number. - * This is used to find sections where the linker have - * appended a dot-number to make the name unique. + * This is used to find sections missing the SHF_ALLOC flag. * The cause of this is often a section specified in assembler - * without "ax" / "aw" and the same section used in .c - * code where gcc add these. + * without "ax" / "aw". */ -static int check_section(const char *modname, const char *sec) -{ - const char *e = sec + strlen(sec) - 1; - if (match(sec, section_white_list)) - return 1; - - if (*e && isdigit(*e)) { - /* consume all digits */ - while (*e && e != sec && isdigit(*e)) - e--; - if (*e == '.' && !strstr(sec, ".linkonce")) { - warn("%s (%s): unexpected section name.\n" - "The (.[number]+) following section name are " - "ld generated and not expected.\n" - "Did you forget to use \"ax\"/\"aw\" " - "in a .S file?\n" - "Note that for example <linux/init.h> contains\n" - "section definitions for use in .S files.\n\n", - modname, sec); - } +static void check_section(const char *modname, struct elf_info *elf, + Elf_Shdr *sechdr) +{ + const char *sec = sech_name(elf, sechdr); + + if (sechdr->sh_type == SHT_PROGBITS && + !(sechdr->sh_flags & SHF_ALLOC) && + !match(sec, section_white_list)) { + warn("%s (%s): unexpected non-allocatable section.\n" + "Did you forget to use \"ax\"/\"aw\" in a .S file?\n" + "Note that for example <linux/init.h> contains\n" + "section definitions for use in .S files.\n\n", + modname, sec); } - return 0; } @@ -928,8 +935,7 @@ static int section_mismatch(const char *fromsec, const char *tosec) * *probe_one, *_console, *_timer * * Pattern 3: - * Whitelist all refereces from .text.head to .init.data - * Whitelist all refereces from .text.head to .init.text + * Whitelist all references from .head.text to any init section * * Pattern 4: * Some symbols belong to init section but still it is ok to reference @@ -1359,7 +1365,7 @@ static void section_rela(const char *modname, struct elf_info *elf, fromsec = sech_name(elf, sechdr); fromsec += strlen(".rela"); /* if from section (name) is know good then skip it */ - if (check_section(modname, fromsec)) + if (match(fromsec, section_white_list)) return; for (rela = start; rela < stop; rela++) { @@ -1403,7 +1409,7 @@ static void section_rel(const char *modname, struct elf_info *elf, fromsec = sech_name(elf, sechdr); fromsec += strlen(".rel"); /* if from section (name) is know good then skip it */ - if (check_section(modname, fromsec)) + if (match(fromsec, section_white_list)) return; for (rel = start; rel < stop; rel++) { @@ -1466,6 +1472,7 @@ static void check_sec_ref(struct module *mod, const char *modname, /* Walk through all sections */ for (i = 0; i < elf->hdr->e_shnum; i++) { + check_section(modname, elf, &elf->sechdrs[i]); /* We want to process only relocation sections and not .init */ if (sechdrs[i].sh_type == SHT_RELA) section_rela(modname, elf, &elf->sechdrs[i]); @@ -1990,6 +1997,7 @@ static void read_markers(const char *fname) if (!mod->skip) add_marker(mod, marker, fmt); } + release_file(file, size); return; fail: fatal("parse error in markers list file\n"); diff --git a/scripts/setlocalversion b/scripts/setlocalversion index 47e75b69a2e9..32c8554f3946 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -10,13 +10,12 @@ cd "${1:-.}" || usage # Check for git and a git repo. if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then - # Do we have an untagged version? - if git name-rev --tags HEAD | grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then - if tag=`git describe 2>/dev/null`; then - echo $tag | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}' - else - printf '%s%s' -g $head - fi + # Do we have an untagged tag? + if atag=`git describe 2>/dev/null`; then + echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}' + # add -g${head}, if there is no usable tag + else + printf '%s%s' -g $head fi # Is this git on svn? diff --git a/scripts/tags.sh b/scripts/tags.sh index 5bd8b1003d44..4a34ec591e8c 100755 --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -164,10 +164,12 @@ case "$1" in ;; "tags") + rm -f tags xtags ctags ;; "TAGS") + rm -f TAGS xtags etags ;; esac diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index ba808ef6babb..2fcad7c33eaf 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3153,7 +3153,7 @@ static int selinux_file_send_sigiotask(struct task_struct *tsk, struct fown_struct *fown, int signum) { struct file *file; - u32 sid = current_sid(); + u32 sid = task_sid(tsk); u32 perm; struct file_security_struct *fsec; diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 63d088f2265f..a2a792c18c40 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -249,6 +249,12 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) new_hw_ptr = hw_base + pos; } } + /* Skip the jiffies check for hardwares with BATCH flag. + * Such hardware usually just increases the position at each IRQ, + * thus it can't give any strange position. + */ + if (runtime->hw.info & SNDRV_PCM_INFO_BATCH) + goto no_jiffies_check; hdelta = new_hw_ptr - old_hw_ptr; jdelta = jiffies - runtime->hw_ptr_jiffies; if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) { @@ -272,6 +278,7 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) hw_base -= hw_base % runtime->buffer_size; delta = 0; } + no_jiffies_check: if (delta > runtime->period_size + runtime->period_size / 2) { hw_ptr_error(substream, "Lost interrupts? " diff --git a/sound/isa/msnd/msnd.c b/sound/isa/msnd/msnd.c index 906454413ed2..3a1526ae1729 100644 --- a/sound/isa/msnd/msnd.c +++ b/sound/isa/msnd/msnd.c @@ -438,7 +438,8 @@ static void snd_msnd_capture_reset_queue(struct snd_msnd *chip, static struct snd_pcm_hardware snd_msnd_playback = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_8000_48000, .rate_min = 8000, @@ -456,7 +457,8 @@ static struct snd_pcm_hardware snd_msnd_playback = { static struct snd_pcm_hardware snd_msnd_capture = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_8000_48000, .rate_min = 8000, diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c index a299340519df..ce3f2e90f4d7 100644 --- a/sound/pci/bt87x.c +++ b/sound/pci/bt87x.c @@ -349,7 +349,8 @@ static struct snd_pcm_hardware snd_bt87x_digital_hw = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = 0, /* set at runtime */ .channels_min = 2, @@ -365,7 +366,8 @@ static struct snd_pcm_hardware snd_bt87x_analog_hw = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8, .rates = SNDRV_PCM_RATE_KNOT, .rate_min = ANALOG_CLOCK / CLOCK_DIV_MAX, diff --git a/sound/pci/echoaudio/indigodjx.c b/sound/pci/echoaudio/indigodjx.c index 3482ef69f491..2e44316530a2 100644 --- a/sound/pci/echoaudio/indigodjx.c +++ b/sound/pci/echoaudio/indigodjx.c @@ -88,6 +88,7 @@ static struct snd_pcm_hardware pcm_hardware_skel = { .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_64000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000, .rate_min = 32000, diff --git a/sound/pci/echoaudio/indigoiox.c b/sound/pci/echoaudio/indigoiox.c index aebee27a40ff..eb3819f9654a 100644 --- a/sound/pci/echoaudio/indigoiox.c +++ b/sound/pci/echoaudio/indigoiox.c @@ -89,6 +89,7 @@ static struct snd_pcm_hardware pcm_hardware_skel = { .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_64000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000, .rate_min = 32000, diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c index 8b79969034be..7cc38a11e997 100644 --- a/sound/pci/korg1212/korg1212.c +++ b/sound/pci/korg1212/korg1212.c @@ -1238,7 +1238,8 @@ static struct snd_pcm_hardware snd_korg1212_playback_info = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED), + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BATCH), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000), @@ -1258,7 +1259,8 @@ static struct snd_pcm_hardware snd_korg1212_capture_info = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED), + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BATCH), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000), diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c index 01066c95580e..d057e6489643 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c @@ -240,7 +240,8 @@ static int pdacf_pcm_prepare(struct snd_pcm_substream *subs) static struct snd_pcm_hardware pdacf_pcm_capture_hw = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME | - SNDRV_PCM_INFO_MMAP_VALID), + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH), .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE | SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE, diff --git a/sound/soc/au1x/dbdma2.c b/sound/soc/au1x/dbdma2.c index 30490a259148..594c6c5b7838 100644 --- a/sound/soc/au1x/dbdma2.c +++ b/sound/soc/au1x/dbdma2.c @@ -82,7 +82,7 @@ static struct au1xpsc_audio_dmadata *au1xpsc_audio_pcmdma[2]; /* PCM hardware DMA capabilities - platform specific */ static const struct snd_pcm_hardware au1xpsc_pcm_hardware = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED, + SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BATCH, .formats = AU1XPSC_PCM_FMTS, .period_bytes_min = AU1XPSC_PERIOD_MIN_BYTES, .period_bytes_max = 4096 * 1024 - 1, diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 921b205de28a..df7c8c281d2f 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -836,6 +836,12 @@ static DECLARE_TLV_DB_SCALE(analog_tlv, -2400, 200, 0); static DECLARE_TLV_DB_SCALE(output_tvl, -1200, 600, 1); /* + * Gain control for earpiece amplifier + * 0 dB to 12 dB in 6 dB steps (mute instead of -6) + */ +static DECLARE_TLV_DB_SCALE(output_ear_tvl, -600, 600, 1); + +/* * Capture gain after the ADCs * from 0 dB to 31 dB in 1 dB steps */ @@ -900,7 +906,7 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = { 4, 3, 0, output_tvl), SOC_SINGLE_TLV_TWL4030("Earpiece Playback Volume", - TWL4030_REG_EAR_CTL, 4, 3, 0, output_tvl), + TWL4030_REG_EAR_CTL, 4, 3, 0, output_ear_tvl), /* Common capture gain controls */ SOC_DOUBLE_R_TLV("TX1 Digital Capture Volume", diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 3b1d0993bed9..0275321ff8ab 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -968,7 +968,7 @@ static int wm8350_pcm_trigger(struct snd_pcm_substream *substream, * required for LRC in master mode. The DACs or ADCs need a * valid audio path i.e. pin -> ADC or DAC -> pin before * the LRC will be enabled in master mode. */ - if (!master && cmd != SNDRV_PCM_TRIGGER_START) + if (!master || cmd != SNDRV_PCM_TRIGGER_START) return 0; if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c index 3aa729df27b5..1111c710118a 100644 --- a/sound/soc/fsl/mpc5200_psc_i2s.c +++ b/sound/soc/fsl/mpc5200_psc_i2s.c @@ -504,7 +504,8 @@ static struct snd_soc_dai psc_i2s_dai_template = { static const struct snd_pcm_hardware psc_i2s_pcm_hardware = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER, + SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE, .rate_min = 8000, diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c index 0dad3a0bb920..baddb1242c71 100644 --- a/sound/soc/sh/dma-sh7760.c +++ b/sound/soc/sh/dma-sh7760.c @@ -103,7 +103,8 @@ static struct snd_pcm_hardware camelot_pcm_hardware = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID), + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH), .formats = DMABRG_FMTS, .rates = DMABRG_RATES, .rate_min = 8000, diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c index af95ff1e126c..1d2e51b3f918 100644 --- a/sound/sparc/dbri.c +++ b/sound/sparc/dbri.c @@ -1975,7 +1975,8 @@ static struct snd_pcm_hardware snd_dbri_pcm_hw = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_MU_LAW | SNDRV_PCM_FMTBIT_A_LAW | SNDRV_PCM_FMTBIT_U8 | diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c index 9a608fa85155..dd1ab6177840 100644 --- a/sound/usb/usx2y/usbusx2yaudio.c +++ b/sound/usb/usx2y/usbusx2yaudio.c @@ -870,7 +870,8 @@ static struct snd_pcm_hardware snd_usX2Y_2c = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID), + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH), .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_3LE, .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000, .rate_min = 44100, |
