diff options
-rw-r--r-- | drivers/net/wireless/b43/leds.c | 8 | ||||
-rw-r--r-- | drivers/net/wireless/b43/lo.c | 6 | ||||
-rw-r--r-- | drivers/net/wireless/b43/main.c | 32 | ||||
-rw-r--r-- | drivers/net/wireless/b43/phy.c | 59 | ||||
-rw-r--r-- | drivers/net/wireless/b43/wa.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/b43/xmit.c | 2 |
6 files changed, 55 insertions, 56 deletions
diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c index e04eba1f9308..4b590d8c65ff 100644 --- a/drivers/net/wireless/b43/leds.c +++ b/drivers/net/wireless/b43/leds.c @@ -190,10 +190,10 @@ void b43_leds_init(struct b43_wldev *dev) enum b43_led_behaviour behaviour; bool activelow; - sprom[0] = bus->sprom.r1.gpio0; - sprom[1] = bus->sprom.r1.gpio1; - sprom[2] = bus->sprom.r1.gpio2; - sprom[3] = bus->sprom.r1.gpio3; + sprom[0] = bus->sprom.gpio0; + sprom[1] = bus->sprom.gpio1; + sprom[2] = bus->sprom.gpio2; + sprom[3] = bus->sprom.gpio3; for (i = 0; i < 4; i++) { if (sprom[i] == 0xFF) { diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c index 0a50fd584c19..88f35e67e226 100644 --- a/drivers/net/wireless/b43/lo.c +++ b/drivers/net/wireless/b43/lo.c @@ -264,8 +264,8 @@ static u16 lo_measure_feedthrough(struct b43_wldev *dev, rfover |= pga; rfover |= lna; rfover |= trsw_rx; - if ((dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_EXTLNA) && - phy->rev > 6) + if ((dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) + && phy->rev > 6) rfover |= B43_PHY_RFOVERVAL_EXTLNA; b43_phy_write(dev, B43_PHY_PGACTL, 0xE300); @@ -634,7 +634,7 @@ static void lo_measure_setup(struct b43_wldev *dev, & 0xFFFC); if (phy->type == B43_PHYTYPE_G) { if ((phy->rev >= 7) && - (sprom->r1.boardflags_lo & B43_BFL_EXTLNA)) { + (sprom->boardflags_lo & B43_BFL_EXTLNA)) { b43_phy_write(dev, B43_PHY_RFOVER, 0x933); } else { b43_phy_write(dev, B43_PHY_RFOVER, 0x133); diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 72321d802f1d..16b413d11d19 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1924,7 +1924,7 @@ static int b43_gpio_init(struct b43_wldev *dev) mask |= 0x0180; set |= 0x0180; } - if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL) { + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) { b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) | 0x0200); @@ -2289,7 +2289,7 @@ static void b43_periodic_every60sec(struct b43_wldev *dev) if (!b43_has_hardware_pctl(phy)) b43_lo_g_ctl_mark_all_unused(dev); - if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) { + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) { b43_mac_suspend(dev); b43_calc_nrssi_slope(dev); if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) { @@ -3208,13 +3208,13 @@ static void b43_bluetooth_coext_enable(struct b43_wldev *dev) struct ssb_sprom *sprom = &dev->dev->bus->sprom; u32 hf; - if (!(sprom->r1.boardflags_lo & B43_BFL_BTCOEXIST)) + if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST)) return; if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode) return; hf = b43_hf_read(dev); - if (sprom->r1.boardflags_lo & B43_BFL_BTCMOD) + if (sprom->boardflags_lo & B43_BFL_BTCMOD) hf |= B43_HF_BTCOEXALT; else hf |= B43_HF_BTCOEX; @@ -3345,7 +3345,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev) hf |= B43_HF_SYMW; if (phy->rev == 1) hf |= B43_HF_GDCW; - if (sprom->r1.boardflags_lo & B43_BFL_PACTRL) + if (sprom->boardflags_lo & B43_BFL_PACTRL) hf |= B43_HF_OFDMPABOOST; } else if (phy->type == B43_PHYTYPE_B) { hf |= B43_HF_SYMW; @@ -3862,20 +3862,20 @@ static void b43_sprom_fixup(struct ssb_bus *bus) /* boardflags workarounds */ if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL && bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74) - bus->sprom.r1.boardflags_lo |= B43_BFL_BTCOEXIST; + bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST; if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE && bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40) - bus->sprom.r1.boardflags_lo |= B43_BFL_PACTRL; + bus->sprom.boardflags_lo |= B43_BFL_PACTRL; /* Handle case when gain is not set in sprom */ - if (bus->sprom.r1.antenna_gain_a == 0xFF) - bus->sprom.r1.antenna_gain_a = 2; - if (bus->sprom.r1.antenna_gain_bg == 0xFF) - bus->sprom.r1.antenna_gain_bg = 2; + if (bus->sprom.antenna_gain_a == 0xFF) + bus->sprom.antenna_gain_a = 2; + if (bus->sprom.antenna_gain_bg == 0xFF) + bus->sprom.antenna_gain_bg = 2; /* Convert Antennagain values to Q5.2 */ - bus->sprom.r1.antenna_gain_a <<= 2; - bus->sprom.r1.antenna_gain_bg <<= 2; + bus->sprom.antenna_gain_a <<= 2; + bus->sprom.antenna_gain_bg <<= 2; } static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl) @@ -3908,10 +3908,10 @@ static int b43_wireless_init(struct ssb_device *dev) hw->max_noise = -110; hw->queues = 1; /* FIXME: hardware has more queues */ SET_IEEE80211_DEV(hw, dev->dev); - if (is_valid_ether_addr(sprom->r1.et1mac)) - SET_IEEE80211_PERM_ADDR(hw, sprom->r1.et1mac); + if (is_valid_ether_addr(sprom->et1mac)) + SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); else - SET_IEEE80211_PERM_ADDR(hw, sprom->r1.il0mac); + SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac); /* Get and initialize struct b43_wl */ wl = hw_to_b43_wl(hw); diff --git a/drivers/net/wireless/b43/phy.c b/drivers/net/wireless/b43/phy.c index 7eb71d73663c..facc01c25f90 100644 --- a/drivers/net/wireless/b43/phy.c +++ b/drivers/net/wireless/b43/phy.c @@ -903,7 +903,7 @@ static void b43_phy_inita(struct b43_wldev *dev) } if ((phy->type == B43_PHYTYPE_G) && - (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL)) { + (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) { b43_phy_write(dev, B43_PHY_OFDM(0x6E), (b43_phy_read(dev, B43_PHY_OFDM(0x6E)) & 0xE000) | 0x3CF); @@ -1006,7 +1006,7 @@ static void b43_phy_initb4(struct b43_wldev *dev) if (phy->radio_ver == 0x2050) b43_phy_write(dev, 0x002A, 0x88C2); b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control); - if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) { + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) { b43_calc_nrssi_slope(dev); b43_calc_nrssi_threshold(dev); } @@ -1153,7 +1153,7 @@ static void b43_phy_initb6(struct b43_wldev *dev) b43_radio_write16(dev, 0x5A, 0x88); b43_radio_write16(dev, 0x5B, 0x6B); b43_radio_write16(dev, 0x5C, 0x0F); - if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_ALTIQ) { + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) { b43_radio_write16(dev, 0x5D, 0xFA); b43_radio_write16(dev, 0x5E, 0xD8); } else { @@ -1245,7 +1245,7 @@ static void b43_phy_initb6(struct b43_wldev *dev) b43_phy_write(dev, 0x0062, 0x0007); b43_radio_init2050(dev); b43_lo_g_measure(dev); - if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) { + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) { b43_calc_nrssi_slope(dev); b43_calc_nrssi_threshold(dev); } @@ -1365,7 +1365,7 @@ static void b43_calc_loopback_gain(struct b43_wldev *dev) b43_phy_write(dev, B43_PHY_RFOVERVAL, b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xCFFF); - if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_EXTLNA) { + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) { if (phy->rev >= 7) { b43_phy_write(dev, B43_PHY_RFOVER, b43_phy_read(dev, B43_PHY_RFOVER) @@ -1532,7 +1532,7 @@ static void b43_phy_initg(struct b43_wldev *dev) & 0x0FFF) | (phy->lo_control-> tx_bias << 12)); } - if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL) + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) b43_phy_write(dev, B43_PHY_BASE(0x2E), 0x8075); else b43_phy_write(dev, B43_PHY_BASE(0x2E), 0x807F); @@ -1546,7 +1546,7 @@ static void b43_phy_initg(struct b43_wldev *dev) b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078); } - if (!(dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI)) { + if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { /* The specs state to update the NRSSI LT with * the value 0x7FFFFFFF here. I think that is some weird * compiler optimization in the original driver. @@ -1756,16 +1756,15 @@ void b43_phy_xmitpower(struct b43_wldev *dev) estimated_pwr = b43_phy_estimate_power_out(dev, average); - max_pwr = dev->dev->bus->sprom.r1.maxpwr_bg; - if ((dev->dev->bus->sprom.r1. - boardflags_lo & B43_BFL_PACTRL) - && (phy->type == B43_PHYTYPE_G)) + max_pwr = dev->dev->bus->sprom.maxpwr_bg; + if ((dev->dev->bus->sprom.boardflags_lo + & B43_BFL_PACTRL) && (phy->type == B43_PHYTYPE_G)) max_pwr -= 0x3; if (unlikely(max_pwr <= 0)) { b43warn(dev->wl, "Invalid max-TX-power value in SPROM.\n"); max_pwr = 60; /* fake it */ - dev->dev->bus->sprom.r1.maxpwr_bg = max_pwr; + dev->dev->bus->sprom.maxpwr_bg = max_pwr; } /*TODO: @@ -1823,7 +1822,7 @@ void b43_phy_xmitpower(struct b43_wldev *dev) B43_TXCTL_TXMIX; rfatt += 2; bbatt += 2; - } else if (dev->dev->bus->sprom.r1. + } else if (dev->dev->bus->sprom. boardflags_lo & B43_BFL_PACTRL) { bbatt += 4 * (rfatt - 2); @@ -1899,13 +1898,13 @@ int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev) s8 *dyn_tssi2dbm; if (phy->type == B43_PHYTYPE_A) { - pab0 = (s16) (dev->dev->bus->sprom.r1.pa1b0); - pab1 = (s16) (dev->dev->bus->sprom.r1.pa1b1); - pab2 = (s16) (dev->dev->bus->sprom.r1.pa1b2); + pab0 = (s16) (dev->dev->bus->sprom.pa1b0); + pab1 = (s16) (dev->dev->bus->sprom.pa1b1); + pab2 = (s16) (dev->dev->bus->sprom.pa1b2); } else { - pab0 = (s16) (dev->dev->bus->sprom.r1.pa0b0); - pab1 = (s16) (dev->dev->bus->sprom.r1.pa0b1); - pab2 = (s16) (dev->dev->bus->sprom.r1.pa0b2); + pab0 = (s16) (dev->dev->bus->sprom.pa0b0); + pab1 = (s16) (dev->dev->bus->sprom.pa0b1); + pab2 = (s16) (dev->dev->bus->sprom.pa0b2); } if ((dev->dev->bus->chip_id == 0x4301) && (phy->radio_ver != 0x2050)) { @@ -1918,17 +1917,17 @@ int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev) pab0 != -1 && pab1 != -1 && pab2 != -1) { /* The pabX values are set in SPROM. Use them. */ if (phy->type == B43_PHYTYPE_A) { - if ((s8) dev->dev->bus->sprom.r1.itssi_a != 0 && - (s8) dev->dev->bus->sprom.r1.itssi_a != -1) + if ((s8) dev->dev->bus->sprom.itssi_a != 0 && + (s8) dev->dev->bus->sprom.itssi_a != -1) phy->tgt_idle_tssi = - (s8) (dev->dev->bus->sprom.r1.itssi_a); + (s8) (dev->dev->bus->sprom.itssi_a); else phy->tgt_idle_tssi = 62; } else { - if ((s8) dev->dev->bus->sprom.r1.itssi_bg != 0 && - (s8) dev->dev->bus->sprom.r1.itssi_bg != -1) + if ((s8) dev->dev->bus->sprom.itssi_bg != 0 && + (s8) dev->dev->bus->sprom.itssi_bg != -1) phy->tgt_idle_tssi = - (s8) (dev->dev->bus->sprom.r1.itssi_bg); + (s8) (dev->dev->bus->sprom.itssi_bg); else phy->tgt_idle_tssi = 62; } @@ -2834,7 +2833,7 @@ void b43_calc_nrssi_threshold(struct b43_wldev *dev) if (phy->radio_ver != 0x2050) return; if (! - (dev->dev->bus->sprom.r1. + (dev->dev->bus->sprom. boardflags_lo & B43_BFL_RSSI)) return; @@ -2865,7 +2864,7 @@ void b43_calc_nrssi_threshold(struct b43_wldev *dev) } case B43_PHYTYPE_G: if (!phy->gmode || - !(dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI)) { + !(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { tmp16 = b43_nrssi_hw_read(dev, 0x20); if (tmp16 >= 0x20) tmp16 -= 0x40; @@ -3387,7 +3386,7 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev, } if ((phy->rev < 7) || - !(sprom->r1.boardflags_lo & B43_BFL_EXTLNA)) { + !(sprom->boardflags_lo & B43_BFL_EXTLNA)) { if (phy_register == B43_PHY_RFOVER) { return 0x1B3; } else if (phy_register == B43_PHY_RFOVERVAL) { @@ -3427,7 +3426,7 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev, } } else { if ((phy->rev < 7) || - !(sprom->r1.boardflags_lo & B43_BFL_EXTLNA)) { + !(sprom->boardflags_lo & B43_BFL_EXTLNA)) { if (phy_register == B43_PHY_RFOVER) { return 0x1B3; } else if (phy_register == B43_PHY_RFOVERVAL) { @@ -3906,7 +3905,7 @@ int b43_radio_selectchannel(struct b43_wldev *dev, b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); if (channel == 14) { - if (dev->dev->bus->sprom.r1.country_code == + if (dev->dev->bus->sprom.country_code == SSB_SPROM1CCODE_JAPAN) b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_ACPR); diff --git a/drivers/net/wireless/b43/wa.c b/drivers/net/wireless/b43/wa.c index b70992aa66bc..b3df1ba0e544 100644 --- a/drivers/net/wireless/b43/wa.c +++ b/drivers/net/wireless/b43/wa.c @@ -527,7 +527,7 @@ static void b43_wa_boards_g(struct b43_wldev *dev) } else { b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 1, 0x0002); b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 2, 0x0001); - if ((bus->sprom.r1.boardflags_lo & B43_BFL_EXTLNA) && + if ((bus->sprom.boardflags_lo & B43_BFL_EXTLNA) && (phy->rev >= 7)) { b43_phy_write(dev, B43_PHY_EXTG(0x11), b43_phy_read(dev, B43_PHY_EXTG(0x11)) & 0xF7FF); @@ -540,7 +540,7 @@ static void b43_wa_boards_g(struct b43_wldev *dev) } } } - if (bus->sprom.r1.boardflags_lo & B43_BFL_FEM) { + if (bus->sprom.boardflags_lo & B43_BFL_FEM) { b43_phy_write(dev, B43_PHY_GTABCTL, 0x3120); b43_phy_write(dev, B43_PHY_GTABDATA, 0xC480); } diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index d36603d499fb..557abe1f1a05 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -385,7 +385,7 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev, else tmp -= 3; } else { - if (dev->dev->bus->sprom.r1. + if (dev->dev->bus->sprom. boardflags_lo & B43_BFL_RSSI) { if (in_rssi > 63) in_rssi = 63; |