diff options
58 files changed, 695 insertions, 1871 deletions
diff --git a/Documentation/ioctl/hdio.txt b/Documentation/ioctl/hdio.txt index c19efdeace2c..91a6ecbae0bb 100644 --- a/Documentation/ioctl/hdio.txt +++ b/Documentation/ioctl/hdio.txt @@ -508,12 +508,13 @@ HDIO_DRIVE_RESET execute a device reset error returns: EACCES Access denied: requires CAP_SYS_ADMIN + ENXIO No such device: phy dead or ctl_addr == 0 + EIO I/O error: reset timed out or hardware error notes: - Abort any current command, prevent anything else from being - queued, execute a reset on the device, and issue BLKRRPART - ioctl on the block device. + Execute a reset on the device as soon as the current IO + operation has completed. Executes an ATAPI soft reset if applicable, otherwise executes an ATA soft reset on the controller. diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 0d1d2133d9bc..61ad8d639ba3 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -433,4 +433,16 @@ config VIRTIO_BLK This is the virtual block driver for virtio. It can be used with lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. +config BLK_DEV_HD + bool "Very old hard disk (MFM/RLL/IDE) driver" + depends on HAVE_IDE + depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN + help + This is a very old hard disk driver that lacks the enhanced + functionality of the newer ones. + + It is required for systems with ancient MFM/RLL/ESDI drives. + + If unsure, say N. + endif # BLK_DEV diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 5e584306be99..204332b29578 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -29,5 +29,6 @@ obj-$(CONFIG_VIRTIO_BLK) += virtio_blk.o obj-$(CONFIG_VIODASD) += viodasd.o obj-$(CONFIG_BLK_DEV_SX8) += sx8.o obj-$(CONFIG_BLK_DEV_UB) += ub.o +obj-$(CONFIG_BLK_DEV_HD) += hd.o obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += xen-blkfront.o diff --git a/drivers/ide/legacy/hd.c b/drivers/block/hd.c index abdedf56643e..682243bf2e46 100644 --- a/drivers/ide/legacy/hd.c +++ b/drivers/block/hd.c @@ -37,7 +37,6 @@ #include <linux/slab.h> #include <linux/string.h> #include <linux/ioport.h> -#include <linux/mc146818rtc.h> /* CMOS defines */ #include <linux/init.h> #include <linux/blkpg.h> #include <linux/hdreg.h> @@ -812,4 +811,4 @@ static int __init parse_hd_setup(char *line) } __setup("hd=", parse_hd_setup); -module_init(hd_init); +late_initcall(hd_init); diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index cf707c8f08d4..15b09b89588a 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -98,6 +98,9 @@ if BLK_DEV_IDE comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" +config IDE_TIMINGS + bool + config IDE_ATAPI bool @@ -326,6 +329,7 @@ config BLK_DEV_PLATFORM config BLK_DEV_CMD640 tristate "CMD640 chipset bugfix/support" depends on X86 + select IDE_TIMINGS ---help--- The CMD-Technologies CMD640 IDE chip is used on many common 486 and Pentium motherboards, usually in combination with a "Neptune" or @@ -455,6 +459,7 @@ config BLK_DEV_AEC62XX config BLK_DEV_ALI15X3 tristate "ALI M15x3 chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C @@ -469,6 +474,7 @@ config BLK_DEV_ALI15X3 config BLK_DEV_AMD74XX tristate "AMD and nVidia IDE support" depends on !ARM + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver adds explicit support for AMD-7xx and AMD-8111 chips @@ -489,6 +495,7 @@ config BLK_DEV_ATIIXP config BLK_DEV_CMD64X tristate "CMD64{3|6|8|9} chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help Say Y here if you have an IDE controller which uses any of these @@ -503,6 +510,7 @@ config BLK_DEV_TRIFLEX config BLK_DEV_CY82C693 tristate "CY82C693 chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver adds detection and support for the CY82C693 chipset @@ -695,6 +703,7 @@ config BLK_DEV_SIS5513 config BLK_DEV_SL82C105 tristate "Winbond SL82c105 support" depends on (PPC || ARM) + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help If you have a Winbond SL82c105 IDE controller, say Y here to enable @@ -725,6 +734,7 @@ config BLK_DEV_TRM290 config BLK_DEV_VIA82CXXX tristate "VIA82CXXX chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver adds explicit support for VIA BusMastering IDE chips. @@ -751,6 +761,7 @@ endif config BLK_DEV_IDE_PMAC tristate "PowerMac on-board IDE support" depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y + select IDE_TIMINGS help This driver provides support for the on-board IDE controller on most of the recent Apple Power Macintoshes and PowerBooks. @@ -829,13 +840,6 @@ config BLK_DEV_IDE_RAPIDE Say Y here if you want to support the Yellowstone RapIDE controller manufactured for use with Acorn computers. -config BLK_DEV_IDE_BAST - tristate "Simtec BAST / Thorcom VR1000 IDE support" - depends on ARM && (ARCH_BAST || MACH_VR1000) - help - Say Y here if you want to support the onboard IDE channels on the - Simtec BAST or the Thorcom VR1000 - config IDE_H8300 tristate "H8300 IDE support" depends on H8300 @@ -919,51 +923,12 @@ config BLK_DEV_Q40IDE config BLK_DEV_PALMCHIP_BK3710 tristate "Palmchip bk3710 IDE controller support" depends on ARCH_DAVINCI + select IDE_TIMINGS select BLK_DEV_IDEDMA_SFF help Say Y here if you want to support the onchip IDE controller on the TI DaVinci SoC - -config BLK_DEV_MPC8xx_IDE - tristate "MPC8xx IDE support" - depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE - help - This option provides support for IDE on Motorola MPC8xx Systems. - Please see 'Type of MPC8xx IDE interface' for details. - - If unsure, say N. - -choice - prompt "Type of MPC8xx IDE interface" - depends on BLK_DEV_MPC8xx_IDE - default IDE_8xx_PCCARD - -config IDE_8xx_PCCARD - bool "8xx_PCCARD" - ---help--- - Select how the IDE devices are connected to the MPC8xx system: - - 8xx_PCCARD uses the 8xx internal PCMCIA interface in combination - with a PC Card (e.g. ARGOSY portable Hard Disk Adapter), - ATA PC Card HDDs or ATA PC Flash Cards (example: TQM8xxL - systems) - - 8xx_DIRECT is used for directly connected IDE devices using the 8xx - internal PCMCIA interface (example: IVMS8 systems) - - EXT_DIRECT is used for IDE devices directly connected to the 8xx - bus using some glue logic, but _not_ the 8xx internal - PCMCIA interface (example: IDIF860 systems) - -config IDE_8xx_DIRECT - bool "8xx_DIRECT" - -config IDE_EXT_DIRECT - bool "EXT_DIRECT" - -endchoice - # no isa -> no vlb if ISA && (ALPHA || X86 || MIPS) @@ -981,6 +946,7 @@ config BLK_DEV_4DRIVES config BLK_DEV_ALI14XX tristate "ALI M14xx support" + select IDE_TIMINGS help This driver is enabled at runtime using the "ali14xx.probe" kernel boot parameter. It enables support for the secondary IDE interface @@ -1000,6 +966,7 @@ config BLK_DEV_DTC2278 config BLK_DEV_HT6560B tristate "Holtek HT6560B support" + select IDE_TIMINGS help This driver is enabled at runtime using the "ht6560b.probe" kernel boot parameter. It enables support for the secondary IDE interface @@ -1009,6 +976,7 @@ config BLK_DEV_HT6560B config BLK_DEV_QD65XX tristate "QDI QD65xx support" + select IDE_TIMINGS help This driver is enabled at runtime using the "qd65xx.probe" kernel boot parameter. It permits faster I/O speeds to be set. See the @@ -1032,30 +1000,4 @@ config BLK_DEV_IDEDMA endif -config BLK_DEV_HD_ONLY - bool "Old hard disk (MFM/RLL/IDE) driver" - depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN - help - There are two drivers for MFM/RLL/IDE hard disks. Most people use - the newer enhanced driver, but this old one is still around for two - reasons. Some older systems have strange timing problems and seem to - work only with the old driver (which itself does not work with some - newer systems). The other reason is that the old driver is smaller, - since it lacks the enhanced functionality of the new one. This makes - it a good choice for systems with very tight memory restrictions, or - for systems with only older MFM/RLL/ESDI drives. Choosing the old - driver can save 13 KB or so of kernel memory. - - If you want to use this driver together with the new one you have - to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new - driver from probing the primary interface. - - If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver - instead of this one. For more detailed information, read the - Disk-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - -config BLK_DEV_HD - def_bool BLK_DEV_HD_ONLY - endif # IDE diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index a2b3f84d710d..5d414e301a5a 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -11,9 +11,11 @@ EXTRA_CFLAGS += -Idrivers/ide -ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o +ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o \ + ide-pio-blacklist.o # core IDE code +ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o @@ -59,9 +61,3 @@ ifeq ($(CONFIG_BLK_DEV_PLATFORM), y) endif obj-$(CONFIG_BLK_DEV_IDE) += arm/ mips/ - -# old hd driver must be last -ifeq ($(CONFIG_BLK_DEV_HD), y) - hd-core-y += legacy/hd.o - obj-y += hd-core.o -endif diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile index 936e7b0237f5..5bc26053afa6 100644 --- a/drivers/ide/arm/Makefile +++ b/drivers/ide/arm/Makefile @@ -1,7 +1,6 @@ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o -obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o ifeq ($(CONFIG_IDE_ARM), m) diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c deleted file mode 100644 index 8e8c28104b45..000000000000 --- a/drivers/ide/arm/bast-ide.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/ide.h> -#include <linux/init.h> - -#include <asm/mach-types.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/arch/map.h> -#include <asm/arch/bast-map.h> -#include <asm/arch/bast-irq.h> - -#define DRV_NAME "bast-ide" - -static int __init bastide_register(unsigned int base, unsigned int aux, int irq) -{ - ide_hwif_t *hwif; - hw_regs_t hw; - int i; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - - memset(&hw, 0, sizeof(hw)); - - base += BAST_IDE_CS; - aux += BAST_IDE_CS; - - for (i = 0; i <= 7; i++) { - hw.io_ports_array[i] = (unsigned long)base; - base += 0x20; - } - - hw.io_ports.ctl_addr = aux + (6 * 0x20); - hw.irq = irq; - hw.chipset = ide_generic; - - hwif = ide_find_port(); - if (hwif == NULL) - goto out; - - i = hwif->index; - - ide_init_port_data(hwif, i); - ide_init_port_hw(hwif, &hw); - hwif->port_ops = NULL; - - idx[0] = i; - - ide_device_add(idx, NULL); -out: - return 0; -} - -static int __init bastide_init(void) -{ - unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS; - - /* we can treat the VR1000 and the BAST the same */ - - if (!(machine_is_bast() || machine_is_vr1000())) - return 0; - - printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n"); - - if (!request_mem_region(base, 0x400000, DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0); - bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1); - - return 0; -} - -module_init(bastide_init); - -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver"); diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 061456914ca3..52f58c885783 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -21,6 +21,8 @@ #include <asm/dma.h> #include <asm/ecard.h> +#define DRV_NAME "icside" + #define ICS_IDENT_OFFSET 0x2280 #define ICS_ARCIN_V5_INTRSTAT 0x0000 @@ -68,6 +70,7 @@ struct icside_state { unsigned int enabled; void __iomem *irq_port; void __iomem *ioc_base; + unsigned int sel; unsigned int type; ide_hwif_t *hwif[2]; }; @@ -165,7 +168,8 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = { static void icside_maskproc(ide_drive_t *drive, int mask) { ide_hwif_t *hwif = HWIF(drive); - struct icside_state *state = hwif->hwif_data; + struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); unsigned long flags; local_irq_save(flags); @@ -308,6 +312,7 @@ static int icside_dma_setup(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); struct request *rq = hwif->hwgroup->rq; unsigned int dma_mode; @@ -331,7 +336,7 @@ static int icside_dma_setup(ide_drive_t *drive) /* * Route the DMA signals to the correct interface. */ - writeb(hwif->select_data, hwif->config_data); + writeb(state->sel | hwif->channel, state->ioc_base); /* * Select the correct timing for this drive. @@ -359,7 +364,8 @@ static void icside_dma_exec_cmd(ide_drive_t *drive, u8 cmd) static int icside_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - struct icside_state *state = hwif->hwif_data; + struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); return readb(state->irq_port + (hwif->channel ? @@ -411,36 +417,24 @@ static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d) return -EOPNOTSUPP; } -static ide_hwif_t * -icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *ec) +static void icside_setup_ports(hw_regs_t *hw, void __iomem *base, + struct cardinfo *info, struct expansion_card *ec) { unsigned long port = (unsigned long)base + info->dataoffset; - ide_hwif_t *hwif; - hwif = ide_find_port(); - if (hwif) { - /* - * Ensure we're using MMIO - */ - default_hwif_mmiops(hwif); - - hwif->io_ports.data_addr = port; - hwif->io_ports.error_addr = port + (1 << info->stepping); - hwif->io_ports.nsect_addr = port + (2 << info->stepping); - hwif->io_ports.lbal_addr = port + (3 << info->stepping); - hwif->io_ports.lbam_addr = port + (4 << info->stepping); - hwif->io_ports.lbah_addr = port + (5 << info->stepping); - hwif->io_ports.device_addr = port + (6 << info->stepping); - hwif->io_ports.status_addr = port + (7 << info->stepping); - hwif->io_ports.ctl_addr = - (unsigned long)base + info->ctrloffset; - hwif->irq = ec->irq; - hwif->chipset = ide_acorn; - hwif->gendev.parent = &ec->dev; - hwif->dev = &ec->dev; - } - - return hwif; + hw->io_ports.data_addr = port; + hw->io_ports.error_addr = port + (1 << info->stepping); + hw->io_ports.nsect_addr = port + (2 << info->stepping); + hw->io_ports.lbal_addr = port + (3 << info->stepping); + hw->io_ports.lbam_addr = port + (4 << info->stepping); + hw->io_ports.lbah_addr = port + (5 << info->stepping); + hw->io_ports.device_addr = port + (6 << info->stepping); + hw->io_ports.status_addr = port + (7 << info->stepping); + hw->io_ports.ctl_addr = (unsigned long)base + info->ctrloffset; + + hw->irq = ec->irq; + hw->dev = &ec->dev; + hw->chipset = ide_acorn; } static int __init @@ -449,6 +443,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) ide_hwif_t *hwif; void __iomem *base; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + hw_regs_t hw; base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0); if (!base) @@ -466,12 +461,19 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) */ icside_irqdisable_arcin_v5(ec, 0); - hwif = icside_setup(base, &icside_cardinfo_v5, ec); + icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec); + + hwif = ide_find_port(); if (!hwif) return -ENODEV; + ide_init_port_hw(hwif, &hw); + default_hwif_mmiops(hwif); + state->hwif[0] = hwif; + ecard_set_drvdata(ec, state); + idx[0] = hwif->index; ide_device_add(idx, NULL); @@ -497,6 +499,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) int ret; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; struct ide_port_info d = icside_v6_port_info; + hw_regs_t hw[2]; ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); if (!ioc_base) { @@ -525,43 +528,47 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) state->irq_port = easi_base; state->ioc_base = ioc_base; + state->sel = sel; /* * Be on the safe side - disable interrupts */ icside_irqdisable_arcin_v6(ec, 0); + icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec); + icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec); + /* * Find and register the interfaces. */ - hwif = icside_setup(easi_base, &icside_cardinfo_v6_1, ec); - mate = icside_setup(easi_base, &icside_cardinfo_v6_2, ec); + hwif = ide_find_port(); + if (hwif == NULL) + return -ENODEV; - if (!hwif || !mate) { - ret = -ENODEV; - goto out; + ide_init_port_hw(hwif, &hw[0]); + default_hwif_mmiops(hwif); + + idx[0] = hwif->index; + + mate = ide_find_port(); + if (mate) { + ide_init_port_hw(mate, &hw[1]); + default_hwif_mmiops(mate); + + idx[1] = mate->index; } state->hwif[0] = hwif; state->hwif[1] = mate; - hwif->hwif_data = state; - hwif->config_data = (unsigned long)ioc_base; - hwif->select_data = sel; - - mate->hwif_data = state; - mate->config_data = (unsigned long)ioc_base; - mate->select_data = sel | 1; + ecard_set_drvdata(ec, state); - if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) { + if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { d.init_dma = icside_dma_init; d.port_ops = &icside_v6_port_ops; d.dma_ops = NULL; } - idx[0] = hwif->index; - idx[1] = mate->index; - ide_device_add(idx, &d); return 0; @@ -627,10 +634,8 @@ icside_probe(struct expansion_card *ec, const struct ecard_id *id) break; } - if (ret == 0) { - ecard_set_drvdata(ec, state); + if (ret == 0) goto out; - } kfree(state); release: diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 3839f5722985..c79b85b6e4a3 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -74,8 +74,6 @@ struct palm_bk3710_udmatiming { #define BK3710_IORDYTMP 0x78 #define BK3710_IORDYTMS 0x7C -#include "../ide-timing.h" - static unsigned ideclk_period; /* in nanoseconds */ static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = { @@ -402,7 +400,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) i = hwif->index; - ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); default_hwif_mmiops(hwif); diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index 1747b2358775..43057e0303c8 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -11,6 +11,10 @@ #include <asm/ecard.h> +static struct const ide_port_info rapide_port_info = { + .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, +}; + static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base, void __iomem *ctrl, unsigned int sz, int irq) { @@ -44,25 +48,26 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) goto release; } - hwif = ide_find_port(); - if (hwif) { - memset(&hw, 0, sizeof(hw)); - rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq); - hw.chipset = ide_generic; - hw.dev = &ec->dev; + memset(&hw, 0, sizeof(hw)); + rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq); + hw.chipset = ide_generic; + hw.dev = &ec->dev; - ide_init_port_hw(hwif, &hw); + hwif = ide_find_port(); + if (hwif == NULL) { + ret = -ENOENT; + goto release; + } - hwif->host_flags = IDE_HFLAG_MMIO; - default_hwif_mmiops(hwif); + ide_init_port_hw(hwif, &hw); + default_hwif_mmiops(hwif); - idx[0] = hwif->index; + idx[0] = hwif->index; - ide_device_add(idx, NULL); + ide_device_add(idx, &rapide_port_info); - ecard_set_drvdata(ec, hwif); - goto out; - } + ecard_set_drvdata(ec, hwif); + goto out; release: ecard_release_resources(ec); diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index ae37ee58bae2..20fad6d542cc 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -8,6 +8,8 @@ #include <asm/io.h> #include <asm/irq.h> +#define DRV_NAME "ide-h8300" + #define bswap(d) \ ({ \ u16 r; \ @@ -176,6 +178,10 @@ static inline void hwif_setup(ide_hwif_t *hwif) hwif->output_data = h8300_output_data; } +static const struct ide_port_info h8300_port_info = { + .host_flags = IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA, +}; + static int __init h8300_ide_init(void) { hw_regs_t hw; @@ -183,6 +189,8 @@ static int __init h8300_ide_init(void) int index; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n"); + if (!request_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8, "ide-h8300")) goto out_busy; if (!request_region(CONFIG_H8300_IDE_ALT, H8300_IDE_GAP, "ide-h8300")) { @@ -192,22 +200,17 @@ static int __init h8300_ide_init(void) hw_setup(&hw); - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR "ide-h8300: IDE I/F register failed\n"); + hwif = ide_find_port_slot(&h8300_port_info); + if (hwif == NULL) return -ENOENT; - } index = hwif->index; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); hwif_setup(hwif); - hwif->host_flags = IDE_HFLAG_NO_IO_32BIT; - printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index); idx[0] = index; - ide_device_add(idx, NULL); + ide_device_add(idx, &h8300_port_info); return 0; diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index d99847157186..6e29dd532090 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -517,14 +517,9 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, int xferlen, ide_handler_t *handler) { - ide_startstop_t startstop; struct cdrom_info *info = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - /* wait for the controller to be idle */ - if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY)) - return startstop; - /* FIXME: for Virtual DMA we must check harder */ if (info->dma) info->dma = !hwif->dma_ops->dma_setup(drive); @@ -604,28 +599,6 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, } /* - * Block read functions. - */ -static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len) -{ - while (len > 0) { - int dum = 0; - xf(drive, NULL, &dum, sizeof(dum)); - len -= sizeof(dum); - } -} - -static void ide_cd_drain_data(ide_drive_t *drive, int nsects) -{ - while (nsects > 0) { - static char dum[SECTOR_SIZE]; - - drive->hwif->input_data(drive, NULL, dum, sizeof(dum)); - nsects--; - } -} - -/* * Check the contents of the interrupt reason register from the cdrom * and attempt to recover if there are problems. Returns 0 if everything's * ok; nonzero if the request has been terminated. @@ -640,15 +613,12 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, if (ireason == (!rw << 1)) return 0; else if (ireason == (rw << 1)) { - ide_hwif_t *hwif = drive->hwif; - xfer_func_t *xf; /* whoops... */ printk(KERN_ERR "%s: %s: wrong transfer direction!\n", drive->name, __func__); - xf = rw ? hwif->output_data : hwif->input_data; - ide_cd_pad_transfer(drive, xf, len); + ide_pad_transfer(drive, rw, len); } else if (rw == 0 && ireason == 1) { /* * Some drives (ASUS) seem to tell us that status info is @@ -696,16 +666,9 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len) static ide_startstop_t cdrom_newpc_intr(ide_drive_t *); -/* - * Routine to send a read/write packet command to the drive. This is usually - * called directly from cdrom_start_{read,write}(). However, for drq_interrupt - * devices, it is called from an interrupt when the drive is ready to accept - * the command. - */ -static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) +static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive, + struct request *rq) { - struct request *rq = HWGROUP(drive)->rq; - if (rq_data_dir(rq) == READ) { unsigned short sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS; @@ -742,6 +705,19 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) /* set up the command */ rq->timeout = ATAPI_WAIT_PC; + return ide_started; +} + +/* + * Routine to send a read/write packet command to the drive. This is usually + * called directly from cdrom_start_{read,write}(). However, for drq_interrupt + * devices, it is called from an interrupt when the drive is ready to accept + * the command. + */ +static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) +{ + struct request *rq = drive->hwif->hwgroup->rq; + /* send the command to the drive and return */ return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr); } @@ -768,9 +744,8 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive) return ide_stopped; } -static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) +static void ide_cd_prepare_seek_request(ide_drive_t *drive, struct request *rq) { - struct request *rq = HWGROUP(drive)->rq; sector_t frame = rq->sector; sector_div(frame, queue_hardsect_size(drive->queue) >> SECTOR_BITS); @@ -780,17 +755,13 @@ static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) put_unaligned(cpu_to_be32(frame), (unsigned int *) &rq->cmd[2]); rq->timeout = ATAPI_WAIT_PC; - return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr); } -static ide_startstop_t cdrom_start_seek(ide_drive_t *drive, unsigned int block) +static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) { - struct cdrom_info *info = drive->driver_data; + struct request *rq = drive->hwif->hwgroup->rq; - info->dma = 0; - info->start_seek = jiffies; - return cdrom_start_packet_command(drive, 0, - cdrom_start_seek_continuation); + return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr); } /* @@ -1011,7 +982,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) - bio_cur_sectors(rq->bio), thislen >> 9); if (nskip > 0) { - ide_cd_drain_data(drive, nskip); + ide_pad_transfer(drive, write, nskip << 9); rq->current_nr_sectors -= nskip; thislen -= (nskip << 9); } @@ -1048,7 +1019,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) * If the buffers are full, pipe the rest into * oblivion. */ - ide_cd_drain_data(drive, thislen >> 9); + ide_pad_transfer(drive, 0, thislen); else { printk(KERN_ERR "%s: confused, missing data\n", drive->name); @@ -1096,7 +1067,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) /* pad, if necessary */ if (!blk_fs_request(rq) && len > 0) - ide_cd_pad_transfer(drive, xferfunc, len); + ide_pad_transfer(drive, write, len); if (blk_pc_request(rq)) { timeout = rq->timeout; @@ -1165,21 +1136,17 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) if (write) cd->devinfo.media_written = 1; - /* start sending the read/write request to the drive */ - return cdrom_start_packet_command(drive, 32768, cdrom_start_rw_cont); + return ide_started; } static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive) { struct request *rq = HWGROUP(drive)->rq; - if (!rq->timeout) - rq->timeout = ATAPI_WAIT_PC; - return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr); } -static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) +static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) { struct cdrom_info *info = drive->driver_data; @@ -1191,10 +1158,16 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) info->dma = 0; /* sg request */ - if (rq->bio) { - int mask = drive->queue->dma_alignment; - unsigned long addr = - (unsigned long)page_address(bio_page(rq->bio)); + if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) { + struct request_queue *q = drive->queue; + unsigned int alignment; + unsigned long addr; + unsigned long stack_mask = ~(THREAD_SIZE - 1); + + if (rq->bio) + addr = (unsigned long)bio_data(rq->bio); + else + addr = (unsigned long)rq->data; info->dma = drive->using_dma; @@ -1204,23 +1177,25 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) * NOTE! The "len" and "addr" checks should possibly have * separate masks. */ - if ((rq->data_len & 15) || (addr & mask)) + alignment = queue_dma_alignment(q) | q->dma_pad_mask; + if (addr & alignment || rq->data_len & alignment) info->dma = 0; - } - /* start sending the command to the drive */ - return cdrom_start_packet_command(drive, rq->data_len, - cdrom_do_newpc_cont); + if (!((addr & stack_mask) ^ + ((unsigned long)current->stack & stack_mask))) + info->dma = 0; + } } /* * cdrom driver request routine. */ -static ide_startstop_t ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, +static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, sector_t block) { - ide_startstop_t action; struct cdrom_info *info = drive->driver_data; + ide_handler_t *fn; + int xferlen; if (blk_fs_request(rq)) { if (info->cd_flags & IDE_CD_FLAG_SEEKING) { @@ -1240,29 +1215,48 @@ static ide_startstop_t ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, } if (rq_data_dir(rq) == READ && IDE_LARGE_SEEK(info->last_block, block, - IDECD_SEEK_THRESHOLD) && - drive->dsc_overlap) - action = cdrom_start_seek(drive, block); - else - action = cdrom_start_rw(drive, rq); + IDECD_SEEK_THRESHOLD) && + drive->dsc_overlap) { + xferlen = 0; + fn = cdrom_start_seek_continuation; + + info->dma = 0; + info->start_seek = jiffies; + + ide_cd_prepare_seek_request(drive, rq); + } else { + xferlen = 32768; + fn = cdrom_start_rw_cont; + + if (cdrom_start_rw(drive, rq) == ide_stopped) + return ide_stopped; + + if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped) + return ide_stopped; + } info->last_block = block; - return action; } else if (blk_sense_request(rq) || blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) { - return cdrom_do_block_pc(drive, rq); + xferlen = rq->data_len; + fn = cdrom_do_newpc_cont; + + if (!rq->timeout) + rq->timeout = ATAPI_WAIT_PC; + + cdrom_do_block_pc(drive, rq); } else if (blk_special_request(rq)) { /* right now this can only be a reset... */ cdrom_end_request(drive, 1); return ide_stopped; + } else { + blk_dump_rq_flags(rq, "ide-cd bad flags"); + cdrom_end_request(drive, 0); + return ide_stopped; } - blk_dump_rq_flags(rq, "ide-cd bad flags"); - cdrom_end_request(drive, 0); - return ide_stopped; + return cdrom_start_packet_command(drive, xferlen, fn); } - - /* * Ioctl handling. * @@ -1872,6 +1866,7 @@ static int ide_cdrom_setup(ide_drive_t *drive) blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn); blk_queue_dma_alignment(drive->queue, 31); + blk_queue_update_dma_pad(drive->queue, 15); drive->queue->unplug_delay = (1 * HZ) / 1000; if (!drive->queue->unplug_delay) drive->queue->unplug_delay = 1; @@ -1954,10 +1949,9 @@ static ide_driver_t ide_cdrom_driver = { .version = IDECD_VERSION, .media = ide_cdrom, .supports_dsc_overlap = 1, - .do_request = ide_do_rw_cdrom, + .do_request = ide_cd_do_request, .end_request = ide_end_request, .error = __ide_error, - .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idecd_proc, #endif diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 5f49a4ae9dd8..3a2e80237c10 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -985,7 +985,6 @@ static ide_driver_t idedisk_driver = { .do_request = ide_do_rw_disk, .end_request = ide_end_request, .error = __ide_error, - .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idedisk_proc, #endif diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index b3689437269f..011d72011cc4 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -351,10 +351,7 @@ static void ide_floppy_callback(ide_drive_t *drive) static void idefloppy_init_pc(struct ide_atapi_pc *pc) { - memset(pc->c, 0, 12); - pc->retries = 0; - pc->flags = 0; - pc->req_xfer = 0; + memset(pc, 0, sizeof(*pc)); pc->buf = pc->pc_buf; pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE; pc->callback = ide_floppy_callback; @@ -561,12 +558,6 @@ static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start) pc->c[4] = start; } -static void idefloppy_create_test_unit_ready_cmd(struct ide_atapi_pc *pc) -{ - idefloppy_init_pc(pc); - pc->c[0] = GPCMD_TEST_UNIT_READY; -} - static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, struct ide_atapi_pc *pc, struct request *rq, unsigned long sector) @@ -711,10 +702,10 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) set_disk_ro(floppy->disk, floppy->wp); page = &pc.buf[8]; - transfer_rate = be16_to_cpu(*(u16 *)&pc.buf[8 + 2]); - sector_size = be16_to_cpu(*(u16 *)&pc.buf[8 + 6]); - cyls = be16_to_cpu(*(u16 *)&pc.buf[8 + 8]); - rpm = be16_to_cpu(*(u16 *)&pc.buf[8 + 28]); + transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]); + sector_size = be16_to_cpup((__be16 *)&pc.buf[8 + 6]); + cyls = be16_to_cpup((__be16 *)&pc.buf[8 + 8]); + rpm = be16_to_cpup((__be16 *)&pc.buf[8 + 28]); heads = pc.buf[8 + 4]; sectors = pc.buf[8 + 5]; @@ -789,8 +780,8 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) for (i = 0; i < desc_cnt; i++) { unsigned int desc_start = 4 + i*8; - blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]); - length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]); + blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); + length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", i, blocks * length / 1024, blocks, length); @@ -911,8 +902,8 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) if (u_index >= u_array_size) break; /* User-supplied buffer too small */ - blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]); - length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]); + blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); + length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); if (put_user(blocks, argp)) return(-EFAULT); @@ -1138,7 +1129,6 @@ static ide_driver_t idefloppy_driver = { .do_request = idefloppy_do_request, .end_request = idefloppy_end_request, .error = __ide_error, - .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idefloppy_proc, #endif @@ -1166,7 +1156,9 @@ static int idefloppy_open(struct inode *inode, struct file *filp) floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; /* Just in case */ - idefloppy_create_test_unit_ready_cmd(&pc); + idefloppy_init_pc(&pc); + pc.c[0] = GPCMD_TEST_UNIT_READY; + if (idefloppy_queue_pc_tail(drive, &pc)) { idefloppy_create_start_stop_cmd(&pc, 1); (void) idefloppy_queue_pc_tail(drive, &pc); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 28057747c1f8..661b75a89d4d 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -504,55 +504,6 @@ ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, u8 stat) EXPORT_SYMBOL_GPL(ide_error); -ide_startstop_t __ide_abort(ide_drive_t *drive, struct request *rq) -{ - if (drive->media != ide_disk) - rq->errors |= ERROR_RESET; - - ide_kill_rq(drive, rq); - - return ide_stopped; -} - -EXPORT_SYMBOL_GPL(__ide_abort); - -/** - * ide_abort - abort pending IDE operations - * @drive: drive the error occurred on - * @msg: message to report - * - * ide_abort kills and cleans up when we are about to do a - * host initiated reset on active commands. Longer term we - * want handlers to have sensible abort handling themselves - * - * This differs fundamentally from ide_error because in - * this case the command is doing just fine when we - * blow it away. - */ - -ide_startstop_t ide_abort(ide_drive_t *drive, const char *msg) -{ - struct request *rq; - - if (drive == NULL || (rq = HWGROUP(drive)->rq) == NULL) - return ide_stopped; - - /* retry only "normal" I/O: */ - if (!blk_fs_request(rq)) { - rq->errors = 1; - ide_end_drive_cmd(drive, BUSY_STAT, 0); - return ide_stopped; - } - - if (rq->rq_disk) { - ide_driver_t *drv; - - drv = *(ide_driver_t **)rq->rq_disk->private_data; - return drv->abort(drive, rq); - } else - return __ide_abort(drive, rq); -} - static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { tf->nsect = drive->sect; @@ -766,6 +717,18 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, return ide_stopped; } +static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq) +{ + switch (rq->cmd[0]) { + case REQ_DRIVE_RESET: + return ide_do_reset(drive); + default: + blk_dump_rq_flags(rq, "ide_special_rq - bad request"); + ide_end_request(drive, 0, 0); + return ide_stopped; + } +} + static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) { struct request_pm_state *pm = rq->data; @@ -869,7 +832,16 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) pm->pm_step == ide_pm_state_completed) ide_complete_pm_request(drive, rq); return startstop; - } + } else if (!rq->rq_disk && blk_special_request(rq)) + /* + * TODO: Once all ULDs have been modified to + * check for specific op codes rather than + * blindly accepting any special request, the + * check for ->rq_disk above may be replaced + * by a more suitable mechanism or even + * dropped entirely. + */ + return ide_special_rq(drive, rq); drv = *(ide_driver_t **)rq->rq_disk->private_data; return drv->do_request(drive, rq, block); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 80ad4f234f3f..44aaec256a30 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -905,6 +905,14 @@ void ide_execute_pkt_cmd(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd); +static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) +{ + struct request *rq = drive->hwif->hwgroup->rq; + + if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) + ide_end_request(drive, err ? err : 1, 0); +} + /* needed below */ static ide_startstop_t do_reset1 (ide_drive_t *, int); @@ -940,7 +948,7 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) } /* done polling */ hwgroup->polling = 0; - hwgroup->resetting = 0; + ide_complete_drive_reset(drive, 0); return ide_stopped; } @@ -956,12 +964,14 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) ide_hwif_t *hwif = HWIF(drive); const struct ide_port_ops *port_ops = hwif->port_ops; u8 tmp; + int err = 0; if (port_ops && port_ops->reset_poll) { - if (port_ops->reset_poll(drive)) { + err = port_ops->reset_poll(drive); + if (err) { printk(KERN_ERR "%s: host reset_poll failure for %s.\n", hwif->name, drive->name); - return ide_stopped; + goto out; } } @@ -975,6 +985,7 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) } printk("%s: reset timed-out, status=0x%02x\n", hwif->name, tmp); drive->failures++; + err = -EIO; } else { printk("%s: reset: ", hwif->name); tmp = ide_read_error(drive); @@ -1001,10 +1012,12 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) if (tmp & 0x80) printk("; slave: failed"); printk("\n"); + err = -EIO; } } +out: hwgroup->polling = 0; /* done polling */ - hwgroup->resetting = 0; /* done reset attempt */ + ide_complete_drive_reset(drive, err); return ide_stopped; } @@ -1090,7 +1103,6 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) /* For an ATAPI device, first try an ATAPI SRST. */ if (drive->media != ide_disk && !do_not_try_atapi) { - hwgroup->resetting = 1; pre_reset(drive); SELECT_DRIVE(drive); udelay (20); @@ -1112,10 +1124,10 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) if (io_ports->ctl_addr == 0) { spin_unlock_irqrestore(&ide_lock, flags); + ide_complete_drive_reset(drive, -ENXIO); return ide_stopped; } - hwgroup->resetting = 1; /* * Note that we also set nIEN while resetting the device, * to mask unwanted interrupts from the interface during the reset. diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 47af80df6872..13af72f09ec4 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -1,26 +1,11 @@ -#include <linux/module.h> #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> #include <linux/interrupt.h> -#include <linux/major.h> -#include <linux/errno.h> -#include <linux/genhd.h> -#include <linux/blkpg.h> -#include <linux/slab.h> -#include <linux/pci.h> -#include <linux/delay.h> #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/bitops.h> -#include <asm/byteorder.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/io.h> - static const char *udma_str[] = { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44", "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" }; @@ -90,142 +75,6 @@ static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) return min(speed, mode); } -/* - * Standard (generic) timings for PIO modes, from ATA2 specification. - * These timings are for access to the IDE data port register *only*. - * Some drives may specify a mode, while also specifying a different - * value for cycle_time (from drive identification data). - */ -const ide_pio_timings_t ide_pio_timings[6] = { - { 70, 165, 600 }, /* PIO Mode 0 */ - { 50, 125, 383 }, /* PIO Mode 1 */ - { 30, 100, 240 }, /* PIO Mode 2 */ - { 30, 80, 180 }, /* PIO Mode 3 with IORDY */ - { 25, 70, 120 }, /* PIO Mode 4 with IORDY */ - { 20, 50, 100 } /* PIO Mode 5 with IORDY (nonstandard) */ -}; - -EXPORT_SYMBOL_GPL(ide_pio_timings); - -/* - * Shared data/functions for determining best PIO mode for an IDE drive. - * Most of this stuff originally lived in cmd640.c, and changes to the - * ide_pio_blacklist[] table should be made with EXTREME CAUTION to avoid - * breaking the fragile cmd640.c support. - */ - -/* - * Black list. Some drives incorrectly report their maximal PIO mode, - * at least in respect to CMD640. Here we keep info on some known drives. - */ -static struct ide_pio_info { - const char *name; - int pio; -} ide_pio_blacklist [] = { - { "Conner Peripherals 540MB - CFS540A", 3 }, - - { "WDC AC2700", 3 }, - { "WDC AC2540", 3 }, - { "WDC AC2420", 3 }, - { "WDC AC2340", 3 }, - { "WDC AC2250", 0 }, - { "WDC AC2200", 0 }, - { "WDC AC21200", 4 }, - { "WDC AC2120", 0 }, - { "WDC AC2850", 3 }, - { "WDC AC1270", 3 }, - { "WDC AC1170", 1 }, - { "WDC AC1210", 1 }, - { "WDC AC280", 0 }, - { "WDC AC31000", 3 }, - { "WDC AC31200", 3 }, - - { "Maxtor 7131 AT", 1 }, - { "Maxtor 7171 AT", 1 }, - { "Maxtor 7213 AT", 1 }, - { "Maxtor 7245 AT", 1 }, - { "Maxtor 7345 AT", 1 }, - { "Maxtor 7546 AT", 3 }, - { "Maxtor 7540 AV", 3 }, - - { "SAMSUNG SHD-3121A", 1 }, - { "SAMSUNG SHD-3122A", 1 }, - { "SAMSUNG SHD-3172A", 1 }, - - { "ST5660A", 3 }, - { "ST3660A", 3 }, - { "ST3630A", 3 }, - { "ST3655A", 3 }, - { "ST3391A", 3 }, - { "ST3390A", 1 }, - { "ST3600A", 1 }, - { "ST3290A", 0 }, - { "ST3144A", 0 }, - { "ST3491A", 1 }, /* reports 3, should be 1 or 2 (depending on */ - /* drive) according to Seagates FIND-ATA program */ - - { "QUANTUM ELS127A", 0 }, - { "QUANTUM ELS170A", 0 }, - { "QUANTUM LPS240A", 0 }, - { "QUANTUM LPS210A", 3 }, - { "QUANTUM LPS270A", 3 }, - { "QUANTUM LPS365A", 3 }, - { "QUANTUM LPS540A", 3 }, - { "QUANTUM LIGHTNING 540A", 3 }, - { "QUANTUM LIGHTNING 730A", 3 }, - - { "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */ - { "QUANTUM FIREBALL_640", 3 }, - { "QUANTUM FIREBALL_1080", 3 }, - { "QUANTUM FIREBALL_1280", 3 }, - { NULL, 0 } -}; - -/** - * ide_scan_pio_blacklist - check for a blacklisted drive - * @model: Drive model string - * - * This routine searches the ide_pio_blacklist for an entry - * matching the start/whole of the supplied model name. - * - * Returns -1 if no match found. - * Otherwise returns the recommended PIO mode from ide_pio_blacklist[]. - */ - -static int ide_scan_pio_blacklist (char *model) -{ - struct ide_pio_info *p; - - for (p = ide_pio_blacklist; p->name != NULL; p++) { - if (strncmp(p->name, model, strlen(p->name)) == 0) - return p->pio; - } - return -1; -} - -unsigned int ide_pio_cycle_time(ide_drive_t *drive, u8 pio) -{ - struct hd_driveid *id = drive->id; - int cycle_time = 0; - - if (id->field_valid & 2) { - if (id->capability & 8) - cycle_time = id->eide_pio_iordy; - else - cycle_time = id->eide_pio; - } - - /* conservative "downgrade" for all pre-ATA2 drives */ - if (pio < 3) { - if (cycle_time && cycle_time < ide_pio_timings[pio].cycle_time) - cycle_time = 0; /* use standard timing */ - } - - return cycle_time ? cycle_time : ide_pio_timings[pio].cycle_time; -} - -EXPORT_SYMBOL_GPL(ide_pio_cycle_time); - /** * ide_get_best_pio_mode - get PIO mode from drive * @drive: drive to consider diff --git a/drivers/ide/ide-pio-blacklist.c b/drivers/ide/ide-pio-blacklist.c new file mode 100644 index 000000000000..a8c2c8f8660a --- /dev/null +++ b/drivers/ide/ide-pio-blacklist.c @@ -0,0 +1,94 @@ +/* + * PIO blacklist. Some drives incorrectly report their maximal PIO mode, + * at least in respect to CMD640. Here we keep info on some known drives. + * + * Changes to the ide_pio_blacklist[] should be made with EXTREME CAUTION + * to avoid breaking the fragile cmd640.c support. + */ + +#include <linux/string.h> + +static struct ide_pio_info { + const char *name; + int pio; +} ide_pio_blacklist [] = { + { "Conner Peripherals 540MB - CFS540A", 3 }, + + { "WDC AC2700", 3 }, + { "WDC AC2540", 3 }, + { "WDC AC2420", 3 }, + { "WDC AC2340", 3 }, + { "WDC AC2250", 0 }, + { "WDC AC2200", 0 }, + { "WDC AC21200", 4 }, + { "WDC AC2120", 0 }, + { "WDC AC2850", 3 }, + { "WDC AC1270", 3 }, + { "WDC AC1170", 1 }, + { "WDC AC1210", 1 }, + { "WDC AC280", 0 }, + { "WDC AC31000", 3 }, + { "WDC AC31200", 3 }, + + { "Maxtor 7131 AT", 1 }, + { "Maxtor 7171 AT", 1 }, + { "Maxtor 7213 AT", 1 }, + { "Maxtor 7245 AT", 1 }, + { "Maxtor 7345 AT", 1 }, + { "Maxtor 7546 AT", 3 }, + { "Maxtor 7540 AV", 3 }, + + { "SAMSUNG SHD-3121A", 1 }, + { "SAMSUNG SHD-3122A", 1 }, + { "SAMSUNG SHD-3172A", 1 }, + + { "ST5660A", 3 }, + { "ST3660A", 3 }, + { "ST3630A", 3 }, + { "ST3655A", 3 }, + { "ST3391A", 3 }, + { "ST3390A", 1 }, + { "ST3600A", 1 }, + { "ST3290A", 0 }, + { "ST3144A", 0 }, + { "ST3491A", 1 }, /* reports 3, should be 1 or 2 (depending on drive) + according to Seagate's FIND-ATA program */ + + { "QUANTUM ELS127A", 0 }, + { "QUANTUM ELS170A", 0 }, + { "QUANTUM LPS240A", 0 }, + { "QUANTUM LPS210A", 3 }, + { "QUANTUM LPS270A", 3 }, + { "QUANTUM LPS365A", 3 }, + { "QUANTUM LPS540A", 3 }, + { "QUANTUM LIGHTNING 540A", 3 }, + { "QUANTUM LIGHTNING 730A", 3 }, + + { "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */ + { "QUANTUM FIREBALL_640", 3 }, + { "QUANTUM FIREBALL_1080", 3 }, + { "QUANTUM FIREBALL_1280", 3 }, + { NULL, 0 } +}; + +/** + * ide_scan_pio_blacklist - check for a blacklisted drive + * @model: Drive model string + * + * This routine searches the ide_pio_blacklist for an entry + * matching the start/whole of the supplied model name. + * + * Returns -1 if no match found. + * Otherwise returns the recommended PIO mode from ide_pio_blacklist[]. + */ + +int ide_scan_pio_blacklist(char *model) +{ + struct ide_pio_info *p; + + for (p = ide_pio_blacklist; p->name != NULL; p++) { + if (strncmp(p->name, model, strlen(p->name)) == 0) + return p->pio; + } + return -1; +} diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index adbd01784162..03f2ef5470a3 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -33,6 +33,8 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) ide_hwif_t *hwif; unsigned long base, ctl; + printk(KERN_INFO DRV_NAME ": generic PnP IDE interface\n"); + if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0))) return -1; @@ -62,10 +64,8 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); - printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); pnp_set_drvdata(dev, hwif); ide_device_add(idx, NULL); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index d21e51a02c3e..235ebdb29b28 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -39,6 +39,8 @@ #include <asm/uaccess.h> #include <asm/io.h> +static ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ + /** * generic_id - add a generic drive id * @drive: drive to make an ID block for @@ -1318,10 +1320,10 @@ static void ide_port_init_devices(ide_hwif_t *hwif) drive->unmask = 1; if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) drive->no_unmask = 1; - } - if (port_ops && port_ops->port_init_devs) - port_ops->port_init_devs(hwif); + if (port_ops && port_ops->init_dev) + port_ops->init_dev(drive); + } } static void ide_init_port(ide_hwif_t *hwif, unsigned int port, @@ -1473,22 +1475,29 @@ ide_hwif_t *ide_find_port_slot(const struct ide_port_info *d) for (; i < MAX_HWIFS; i++) { hwif = &ide_hwifs[i]; if (hwif->chipset == ide_unknown) - return hwif; + goto out_found; } } else { for (i = 2; i < MAX_HWIFS; i++) { hwif = &ide_hwifs[i]; if (hwif->chipset == ide_unknown) - return hwif; + goto out_found; } for (i = 0; i < 2 && i < MAX_HWIFS; i++) { hwif = &ide_hwifs[i]; if (hwif->chipset == ide_unknown) - return hwif; + goto out_found; } } + printk(KERN_ERR "%s: no free slot for interface\n", + d ? d->name : "ide"); + return NULL; + +out_found: + ide_init_port_data(hwif, i); + return hwif; } EXPORT_SYMBOL_GPL(ide_find_port_slot); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index f9cf1670e4e1..b711ab96e287 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2591,7 +2591,6 @@ static ide_driver_t idetape_driver = { .do_request = idetape_do_request, .end_request = idetape_end_request, .error = __ide_error, - .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idetape_proc, #endif diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index cf55a48a7dd2..1fbdb746dc88 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -8,28 +8,18 @@ * The big the bad and the ugly. */ -#include <linux/module.h> #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> #include <linux/sched.h> #include <linux/interrupt.h> -#include <linux/major.h> #include <linux/errno.h> -#include <linux/genhd.h> -#include <linux/blkpg.h> #include <linux/slab.h> -#include <linux/pci.h> #include <linux/delay.h> #include <linux/hdreg.h> #include <linux/ide.h> -#include <linux/bitops.h> #include <linux/scatterlist.h> -#include <asm/byteorder.h> -#include <asm/irq.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -62,25 +52,6 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) return ide_raw_taskfile(drive, &args, buf, 1); } -static int inline task_dma_ok(ide_task_t *task) -{ - if (blk_fs_request(task->rq) || (task->tf_flags & IDE_TFLAG_FLAGGED)) - return 1; - - switch (task->tf.command) { - case WIN_WRITEDMA_ONCE: - case WIN_WRITEDMA: - case WIN_WRITEDMA_EXT: - case WIN_READDMA_ONCE: - case WIN_READDMA: - case WIN_READDMA_EXT: - case WIN_IDENTIFY_DMA: - return 1; - } - - return 0; -} - static ide_startstop_t task_no_data_intr(ide_drive_t *); static ide_startstop_t set_geometry_intr(ide_drive_t *); static ide_startstop_t recal_intr(ide_drive_t *); @@ -139,8 +110,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) WAIT_WORSTCASE, NULL); return ide_started; default: - if (task_dma_ok(task) == 0 || drive->using_dma == 0 || - dma_ops->dma_setup(drive)) + if (drive->using_dma == 0 || dma_ops->dma_setup(drive)) return ide_stopped; dma_ops->dma_exec_cmd(drive, tf->command); dma_ops->dma_start(drive); @@ -183,7 +153,6 @@ static ide_startstop_t set_geometry_intr(ide_drive_t *drive) if (stat & (ERR_STAT|DRQ_STAT)) return ide_error(drive, "set_geometry_intr", stat); - BUG_ON(HWGROUP(drive)->handler != NULL); ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL); return ide_started; } diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timings.c index 2e91c5870b4c..8c2f8327f487 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timings.c @@ -1,11 +1,7 @@ -#ifndef _IDE_TIMING_H -#define _IDE_TIMING_H - /* * Copyright (c) 1999-2001 Vojtech Pavlik - */ - -/* + * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -27,27 +23,14 @@ #include <linux/kernel.h> #include <linux/hdreg.h> - -#define XFER_PIO_5 0x0d -#define XFER_UDMA_SLOW 0x4f - -struct ide_timing { - short mode; - short setup; /* t1 */ - short act8b; /* t2 for 8-bit io */ - short rec8b; /* t2i for 8-bit io */ - short cyc8b; /* t0 for 8-bit io */ - short active; /* t2 or tD */ - short recover; /* t2i or tK */ - short cycle; /* t0 */ - short udma; /* t2CYCTYP/2 */ -}; +#include <linux/ide.h> +#include <linux/module.h> /* * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). * These were taken from ATA/ATAPI-6 standard, rev 0a, except * for PIO 5, which is a nonstandard extension and UDMA6, which - * is currently supported only by Maxtor drives. + * is currently supported only by Maxtor drives. */ static struct ide_timing ide_timing[] = { @@ -61,12 +44,10 @@ static struct ide_timing ide_timing[] = { { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, - { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, - { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, @@ -81,29 +62,46 @@ static struct ide_timing ide_timing[] = { { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, - { -1 } + { 0xff } }; -#define IDE_TIMING_SETUP 0x01 -#define IDE_TIMING_ACT8B 0x02 -#define IDE_TIMING_REC8B 0x04 -#define IDE_TIMING_CYC8B 0x08 -#define IDE_TIMING_8BIT 0x0e -#define IDE_TIMING_ACTIVE 0x10 -#define IDE_TIMING_RECOVER 0x20 -#define IDE_TIMING_CYCLE 0x40 -#define IDE_TIMING_UDMA 0x80 -#define IDE_TIMING_ALL 0xff - -#define ENOUGH(v,unit) (((v)-1)/(unit)+1) -#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) - -#define XFER_MODE 0xf0 -#define XFER_MWDMA 0x20 -#define XFER_EPIO 0x01 -#define XFER_PIO 0x00 - -static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int T, int UT) +struct ide_timing *ide_timing_find_mode(u8 speed) +{ + struct ide_timing *t; + + for (t = ide_timing; t->mode != speed; t++) + if (t->mode == 0xff) + return NULL; + return t; +} +EXPORT_SYMBOL_GPL(ide_timing_find_mode); + +u16 ide_pio_cycle_time(ide_drive_t *drive, u8 pio) +{ + struct hd_driveid *id = drive->id; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); + u16 cycle = 0; + + if (id->field_valid & 2) { + if (id->capability & 8) + cycle = id->eide_pio_iordy; + else + cycle = id->eide_pio; + + /* conservative "downgrade" for all pre-ATA2 drives */ + if (pio < 3 && cycle < t->cycle) + cycle = 0; /* use standard timing */ + } + + return cycle ? cycle : t->cycle; +} +EXPORT_SYMBOL_GPL(ide_pio_cycle_time); + +#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1) +#define EZ(v, unit) ((v) ? ENOUGH(v, unit) : 0) + +static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, + int T, int UT) { q->setup = EZ(t->setup * 1000, T); q->act8b = EZ(t->act8b * 1000, T); @@ -115,92 +113,83 @@ static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int q->udma = EZ(t->udma * 1000, UT); } -static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, struct ide_timing *m, unsigned int what) -{ - if (what & IDE_TIMING_SETUP ) m->setup = max(a->setup, b->setup); - if (what & IDE_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); - if (what & IDE_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); - if (what & IDE_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); - if (what & IDE_TIMING_ACTIVE ) m->active = max(a->active, b->active); - if (what & IDE_TIMING_RECOVER) m->recover = max(a->recover, b->recover); - if (what & IDE_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); - if (what & IDE_TIMING_UDMA ) m->udma = max(a->udma, b->udma); -} - -static struct ide_timing* ide_timing_find_mode(short speed) +void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, + struct ide_timing *m, unsigned int what) { - struct ide_timing *t; - - for (t = ide_timing; t->mode != speed; t++) - if (t->mode < 0) - return NULL; - return t; + if (what & IDE_TIMING_SETUP) + m->setup = max(a->setup, b->setup); + if (what & IDE_TIMING_ACT8B) + m->act8b = max(a->act8b, b->act8b); + if (what & IDE_TIMING_REC8B) + m->rec8b = max(a->rec8b, b->rec8b); + if (what & IDE_TIMING_CYC8B) + m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & IDE_TIMING_ACTIVE) + m->active = max(a->active, b->active); + if (what & IDE_TIMING_RECOVER) + m->recover = max(a->recover, b->recover); + if (what & IDE_TIMING_CYCLE) + m->cycle = max(a->cycle, b->cycle); + if (what & IDE_TIMING_UDMA) + m->udma = max(a->udma, b->udma); } +EXPORT_SYMBOL_GPL(ide_timing_merge); -static int ide_timing_compute(ide_drive_t *drive, short speed, struct ide_timing *t, int T, int UT) +int ide_timing_compute(ide_drive_t *drive, u8 speed, + struct ide_timing *t, int T, int UT) { struct hd_driveid *id = drive->id; struct ide_timing *s, p; -/* - * Find the mode. - */ - - if (!(s = ide_timing_find_mode(speed))) + /* + * Find the mode. + */ + s = ide_timing_find_mode(speed); + if (s == NULL) return -EINVAL; -/* - * Copy the timing from the table. - */ - + /* + * Copy the timing from the table. + */ *t = *s; -/* - * If the drive is an EIDE drive, it can tell us it needs extended - * PIO/MWDMA cycle timing. - */ - + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MWDMA cycle timing. + */ if (id && id->field_valid & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); - switch (speed & XFER_MODE) { - - case XFER_PIO: - if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = id->eide_pio; - else p.cycle = p.cyc8b = id->eide_pio_iordy; - break; - - case XFER_MWDMA: - p.cycle = id->eide_dma_min; - break; - } + if (speed <= XFER_PIO_2) + p.cycle = p.cyc8b = id->eide_pio; + else if (speed <= XFER_PIO_5) + p.cycle = p.cyc8b = id->eide_pio_iordy; + else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) + p.cycle = id->eide_dma_min; ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); } -/* - * Convert the timing to bus clock counts. - */ - + /* + * Convert the timing to bus clock counts. + */ ide_timing_quantize(t, t, T, UT); -/* - * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T - * and some other commands. We have to ensure that the DMA cycle timing is - * slower/equal than the fastest PIO timing. - */ - - if ((speed & XFER_MODE) != XFER_PIO) { + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, + * S.M.A.R.T and some other commands. We have to ensure that the + * DMA cycle timing is slower/equal than the fastest PIO timing. + */ + if (speed >= XFER_SW_DMA_0) { u8 pio = ide_get_best_pio_mode(drive, 255, 5); ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT); ide_timing_merge(&p, t, t, IDE_TIMING_ALL); } -/* - * Lengthen active & recovery time so that cycle time is correct. - */ - + /* + * Lengthen active & recovery time so that cycle time is correct. + */ if (t->act8b + t->rec8b < t->cyc8b) { t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; t->rec8b = t->cyc8b - t->act8b; @@ -213,5 +202,4 @@ static int ide_timing_compute(ide_drive_t *drive, short speed, struct ide_timing return 0; } - -#endif +EXPORT_SYMBOL_GPL(ide_timing_compute); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 2b8453510e09..d4a6b102a772 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -50,29 +50,16 @@ #include <linux/types.h> #include <linux/string.h> #include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> #include <linux/interrupt.h> #include <linux/major.h> #include <linux/errno.h> #include <linux/genhd.h> -#include <linux/blkpg.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/pci.h> -#include <linux/delay.h> #include <linux/ide.h> #include <linux/completion.h> -#include <linux/reboot.h> -#include <linux/cdrom.h> -#include <linux/seq_file.h> #include <linux/device.h> -#include <linux/bitops.h> - -#include <asm/byteorder.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/io.h> /* default maximum number of failures */ @@ -91,8 +78,6 @@ DEFINE_MUTEX(ide_cfg_mtx); __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); EXPORT_SYMBOL(ide_lock); -ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ - static void ide_port_init_devices_data(ide_hwif_t *); /* @@ -121,7 +106,6 @@ void ide_init_port_data(ide_hwif_t *hwif, unsigned int index) ide_port_init_devices_data(hwif); } -EXPORT_SYMBOL_GPL(ide_init_port_data); static void ide_port_init_devices_data(ide_hwif_t *hwif) { @@ -150,18 +134,6 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif) } } -static void __init init_ide_data (void) -{ - unsigned int index; - - /* Initialise all interface structures */ - for (index = 0; index < MAX_HWIFS; ++index) { - ide_hwif_t *hwif = &ide_hwifs[index]; - - ide_init_port_data(hwif, index); - } -} - void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) { ide_hwgroup_t *hwgroup = hwif->hwgroup; @@ -312,7 +284,8 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports)); hwif->irq = hw->irq; hwif->chipset = hw->chipset; - hwif->gendev.parent = hw->dev; + hwif->dev = hw->dev; + hwif->gendev.parent = hw->parent ? hw->parent : hw->dev; hwif->ack_intr = hw->ack_intr; } EXPORT_SYMBOL_GPL(ide_init_port_hw); @@ -556,6 +529,22 @@ static int generic_ide_resume(struct device *dev) return err; } +static int generic_drive_reset(ide_drive_t *drive) +{ + struct request *rq; + int ret = 0; + + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_len = 1; + rq->cmd[0] = REQ_DRIVE_RESET; + rq->cmd_flags |= REQ_SOFTBARRIER; + if (blk_execute_rq(drive->queue, NULL, rq, 1)) + ret = rq->errors; + blk_put_request(rq); + return ret; +} + int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev, unsigned int cmd, unsigned long arg) { @@ -630,33 +619,8 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device if (!capable(CAP_SYS_ADMIN)) return -EACCES; - /* - * Abort the current command on the - * group if there is one, taking - * care not to allow anything else - * to be queued and to die on the - * spot if we miss one somehow - */ - - spin_lock_irqsave(&ide_lock, flags); - - if (HWGROUP(drive)->resetting) { - spin_unlock_irqrestore(&ide_lock, flags); - return -EBUSY; - } + return generic_drive_reset(drive); - ide_abort(drive, "drive reset"); - - BUG_ON(HWGROUP(drive)->handler); - - /* Ensure nothing gets queued after we - drop the lock. Reset will clear the busy */ - - HWGROUP(drive)->busy = 1; - spin_unlock_irqrestore(&ide_lock, flags); - (void) ide_do_reset(drive); - - return 0; case HDIO_GET_BUSSTATE: if (!capable(CAP_SYS_ADMIN)) return -EACCES; @@ -1021,8 +985,6 @@ static int __init ide_init(void) goto out_port_class; } - init_ide_data(); - proc_ide_create(); return 0; diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index 052125fafcfa..4ec19737f3c5 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -117,10 +117,11 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 param1, param2, param3, param4; unsigned long flags; int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); /* calculate timing, according to PIO mode */ time1 = ide_pio_cycle_time(drive, pio); - time2 = ide_pio_timings[pio].active_time; + time2 = t->active; param3 = param1 = (time2 * bus_speed + 999) / 1000; param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1; if (pio < 3) { diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 9a1d27ef3f8a..0497e7f85b09 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -227,7 +227,6 @@ fail_base2: if (hwif) { u8 index = hwif->index; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); idx[i] = index; diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index af11028b4794..129a812bb57f 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -111,7 +111,6 @@ static int __init falconide_init(void) u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); /* Atari has a byte-swapped IDE interface */ diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index b78941680c32..7e74b20202df 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -185,7 +185,6 @@ found: if (hwif) { u8 index = hwif->index; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); idx[i] = index; diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index dd6dfb32e853..7bc8fd59ea9e 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -216,6 +216,7 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio) if (pio) { unsigned int cycle_time; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); cycle_time = ide_pio_cycle_time(drive, pio); @@ -224,10 +225,8 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio) * actual cycle time for recovery and activity * according system bus speed. */ - active_time = ide_pio_timings[pio].active_time; - recovery_time = cycle_time - - active_time - - ide_pio_timings[pio].setup_time; + active_time = t->active; + recovery_time = cycle_time - active_time - t->setup; /* * Cycle times should be Vesa bus cycles */ @@ -311,16 +310,16 @@ static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio) #endif } -static void __init ht6560b_port_init_devs(ide_hwif_t *hwif) +static void __init ht6560b_init_dev(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; /* Setting default configurations for drives. */ int t = (HT_CONFIG_DEFAULT << 8) | HT_TIMING_DEFAULT; if (hwif->channel) t |= (HT_SECONDARY_IF << 8); - hwif->drives[0].drive_data = t; - hwif->drives[1].drive_data = t; + drive->drive_data = t; } static int probe_ht6560b; @@ -329,7 +328,7 @@ module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); static const struct ide_port_ops ht6560b_port_ops = { - .port_init_devs = ht6560b_port_init_devs, + .init_dev = ht6560b_init_dev, .set_pio_mode = ht6560b_set_pio_mode, .selectproc = ht6560b_selectproc, }; diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c index ecae916a3385..89c8ff0a4d08 100644 --- a/drivers/ide/legacy/ide-4drives.c +++ b/drivers/ide/legacy/ide-4drives.c @@ -11,6 +11,21 @@ static int probe_4drives; module_param_named(probe, probe_4drives, bool, 0); MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); +static void ide_4drives_init_dev(ide_drive_t *drive) +{ + if (drive->hwif->channel) + drive->select.all ^= 0x20; +} + +static const struct ide_port_ops ide_4drives_port_ops = { + .init_dev = ide_4drives_init_dev, +}; + +static const struct ide_port_info ide_4drives_port_info = { + .port_ops = &ide_4drives_port_ops, + .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA, +}; + static int __init ide_4drives_init(void) { ide_hwif_t *hwif, *mate; @@ -49,18 +64,10 @@ static int __init ide_4drives_init(void) mate = ide_find_port(); if (mate) { ide_init_port_hw(mate, &hw); - mate->drives[0].select.all ^= 0x20; - mate->drives[1].select.all ^= 0x20; idx[1] = mate->index; - - if (hwif) { - hwif->mate = mate; - mate->mate = hwif; - hwif->serialized = mate->serialized = 1; - } } - ide_device_add(idx, NULL); + ide_device_add(idx, &ide_4drives_port_info); return 0; } diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 8dbf4d9b6447..fc53dcfbfe38 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -154,6 +154,11 @@ static const struct ide_port_ops idecs_port_ops = { .quirkproc = ide_undecoded_slave, }; +static const struct ide_port_info idecs_port_info = { + .port_ops = &idecs_port_ops, + .host_flags = IDE_HFLAG_NO_DMA, +}; + static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle) { @@ -187,13 +192,11 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, i = hwif->index; - ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); - hwif->port_ops = &idecs_port_ops; idx[0] = i; - ide_device_add(idx, NULL); + ide_device_add(idx, &idecs_port_info); if (hwif->present) return hwif; diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index d3bc3f24e05d..a249562b34b5 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -44,6 +44,10 @@ static void __devinit plat_ide_setup_ports(hw_regs_t *hw, hw->chipset = ide_generic; } +static const struct ide_port_info platform_ide_port_info = { + .host_flags = IDE_HFLAG_NO_DMA, +}; + static int __devinit plat_ide_probe(struct platform_device *pdev) { struct resource *res_base, *res_alt, *res_irq; @@ -54,6 +58,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) int ret = 0; int mmio = 0; hw_regs_t hw; + struct ide_port_info d = platform_ide_port_info; pdata = pdev->dev.platform_data; @@ -102,13 +107,13 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) ide_init_port_hw(hwif, &hw); if (mmio) { - hwif->host_flags = IDE_HFLAG_MMIO; + d.host_flags |= IDE_HFLAG_MMIO; default_hwif_mmiops(hwif); } idx[0] = hwif->index; - ide_device_add(idx, NULL); + ide_device_add(idx, &d); platform_set_drvdata(pdev, hwif); diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index 2e84290d0bcc..0a6195bcfeda 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -130,7 +130,6 @@ static int __init macide_init(void) u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); ide_device_add(idx, NULL); diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 8ff6e2d20834..9c2b9d078f69 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -142,7 +142,6 @@ static int __init q40ide_init(void) hwif = ide_find_port(); if (hwif) { - ide_init_port_data(hwif, hwif->index); ide_init_port_hw(hwif, &hw); /* Q40 has a byte-swapped IDE interface */ diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 51dba82f8812..2338f344ea24 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -207,6 +207,7 @@ static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = drive->hwif; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); unsigned int cycle_time; int active_time = 175; int recovery_time = 415; /* worst case values from the dos driver */ @@ -236,7 +237,7 @@ static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio) active_time = 110; recovery_time = cycle_time - 120; } else { - active_time = ide_pio_timings[pio].active_time; + active_time = t->active; recovery_time = cycle_time - active_time; } } @@ -281,17 +282,18 @@ static int __init qd_testreg(int port) return (readreg != QD_TESTVAL); } -static void __init qd6500_port_init_devs(ide_hwif_t *hwif) +static void __init qd6500_init_dev(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; u8 base = (hwif->config_data & 0xff00) >> 8; u8 config = QD_CONFIG(hwif); - hwif->drives[0].drive_data = QD6500_DEF_DATA; - hwif->drives[1].drive_data = QD6500_DEF_DATA; + drive->drive_data = QD6500_DEF_DATA; } -static void __init qd6580_port_init_devs(ide_hwif_t *hwif) +static void __init qd6580_init_dev(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; u16 t1, t2; u8 base = (hwif->config_data & 0xff00) >> 8; u8 config = QD_CONFIG(hwif); @@ -302,18 +304,17 @@ static void __init qd6580_port_init_devs(ide_hwif_t *hwif) } else t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA; - hwif->drives[0].drive_data = t1; - hwif->drives[1].drive_data = t2; + drive->drive_data = drive->select.b.unit ? t2 : t1; } static const struct ide_port_ops qd6500_port_ops = { - .port_init_devs = qd6500_port_init_devs, + .init_dev = qd6500_init_dev, .set_pio_mode = qd6500_set_pio_mode, .selectproc = qd65xx_select, }; static const struct ide_port_ops qd6580_port_ops = { - .port_init_devs = qd6580_port_init_devs, + .init_dev = qd6580_init_dev, .set_pio_mode = qd6580_set_pio_mode, .selectproc = qd65xx_select, }; diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 1a6c27b32498..48d57cae63c6 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -213,10 +213,8 @@ static int auide_build_dmatable(ide_drive_t *drive) { int i, iswrite, count = 0; ide_hwif_t *hwif = HWIF(drive); - struct request *rq = HWGROUP(drive)->rq; - - _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; + _auide_hwif *ahwif = &auide_hwif; struct scatterlist *sg; iswrite = (rq_data_dir(rq) == WRITE); @@ -402,7 +400,7 @@ static const struct ide_dma_ops au1xxx_dma_ops = { static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) { - _auide_hwif *auide = (_auide_hwif *)hwif->hwif_data; + _auide_hwif *auide = &auide_hwif; dbdev_tab_t source_dev_tab, target_dev_tab; u32 dev_id, tsize, devwidth, flags; @@ -463,7 +461,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) #else static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) { - _auide_hwif *auide = (_auide_hwif *)hwif->hwif_data; + _auide_hwif *auide = &auide_hwif; dbdev_tab_t source_dev_tab; int flags; @@ -600,8 +598,6 @@ static int au_ide_probe(struct device *dev) ide_init_port_hw(hwif, &hw); - hwif->dev = dev; - /* If the user has selected DDMA assisted copies, then set up a few local I/O function entry points */ @@ -610,11 +606,8 @@ static int au_ide_probe(struct device *dev) hwif->input_data = au1xxx_input_data; hwif->output_data = au1xxx_output_data; #endif - hwif->select_data = 0; /* no chipset-specific code */ - hwif->config_data = 0; /* no chipset-specific code */ auide_hwif.hwif = hwif; - hwif->hwif_data = &auide_hwif; idx[0] = hwif->index; diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index 52fee3d2771a..9f1212cc4aed 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -61,6 +61,11 @@ static struct resource swarm_ide_resource = { static struct platform_device *swarm_ide_dev; +static const struct ide_port_info swarm_port_info = { + .name = DRV_NAME, + .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, +}; + /* * swarm_ide_probe - if the board header indicates the existence of * Generic Bus IDE, allocate a HWIF for it. @@ -77,12 +82,6 @@ static int __devinit swarm_ide_probe(struct device *dev) if (!SIBYTE_HAVE_IDE) return -ENODEV; - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR DRV_NAME ": no free slot for interface\n"); - return -ENOMEM; - } - base = ioremap(A_IO_EXT_BASE, 0x800); offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); @@ -109,10 +108,6 @@ static int __devinit swarm_ide_probe(struct device *dev) base = ioremap(offset, size); - /* Setup MMIO ops. */ - hwif->host_flags = IDE_HFLAG_MMIO; - default_hwif_mmiops(hwif); - for (i = 0; i <= 7; i++) hw.io_ports_array[i] = (unsigned long)(base + ((0x1f0 + i) << 5)); @@ -121,15 +116,26 @@ static int __devinit swarm_ide_probe(struct device *dev) hw.irq = K_INT_GB_IDE; hw.chipset = ide_generic; + hwif = ide_find_port_slot(&swarm_port_info); + if (hwif == NULL) + goto err; + ide_init_port_hw(hwif, &hw); + /* Setup MMIO ops. */ + default_hwif_mmiops(hwif); + idx[0] = hwif->index; - ide_device_add(idx, NULL); + ide_device_add(idx, &swarm_port_info); dev_set_drvdata(dev, hwif); return 0; +err: + release_resource(&swarm_ide_resource); + iounmap(base); + return -ENOMEM; } static struct device_driver swarm_ide_driver = { diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index f2de00adf147..80d19c0eb780 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -69,7 +69,8 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); - int s_time, a_time, c_time; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); + int s_time = t->setup, a_time = t->active, c_time = t->cycle; u8 s_clc, a_clc, r_clc; unsigned long flags; int bus_speed = ide_pci_clk ? ide_pci_clk : 33; @@ -78,13 +79,10 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 cd_dma_fifo = 0; int unit = drive->select.b.unit & 1; - s_time = ide_pio_timings[pio].setup_time; - a_time = ide_pio_timings[pio].active_time; if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) s_clc = 0; if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8) a_clc = 0; - c_time = ide_pio_timings[pio].cycle_time; if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) { r_clc = 1; diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index ad222206a429..0bfcdd0e77b3 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -21,8 +21,6 @@ #include <linux/init.h> #include <linux/ide.h> -#include "ide-timing.h" - enum { AMD_IDE_CONFIG = 0x41, AMD_CABLE_DETECT = 0x42, diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index cd1ba14984ab..1ad1e23e3105 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -521,6 +521,7 @@ static void program_drive_counts(ide_drive_t *drive, unsigned int index) static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, u8 pio_mode, unsigned int cycle_time) { + struct ide_timing *t; int setup_time, active_time, recovery_time, clock_time; u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count; int bus_speed; @@ -532,8 +533,11 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, if (pio_mode > 5) pio_mode = 5; - setup_time = ide_pio_timings[pio_mode].setup_time; - active_time = ide_pio_timings[pio_mode].active_time; + + t = ide_timing_find_mode(XFER_PIO_0 + pio_mode); + setup_time = t->setup; + active_time = t->active; + recovery_time = cycle_time - (setup_time + active_time); clock_time = 1000 / bus_speed; cycle_count = DIV_ROUND_UP(cycle_time, clock_time); @@ -607,11 +611,40 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) display_clocks(index); } +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + +static void cmd640_init_dev(ide_drive_t *drive) +{ + unsigned int i = drive->hwif->channel * 2 + drive->select.b.unit; + +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + /* + * Reset timing to the slowest speed and turn off prefetch. + * This way, the drive identify code has a better chance. + */ + setup_counts[i] = 4; /* max possible */ + active_counts[i] = 16; /* max possible */ + recovery_counts[i] = 16; /* max possible */ + program_drive_counts(drive, i); + set_prefetch_mode(drive, i, 0); + printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch cleared\n", i); +#else + /* + * Set the drive unmask flags to match the prefetch setting. + */ + check_prefetch(drive, i); + printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n", + i, drive->no_io_32bit ? "off" : "on"); +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ +} + static const struct ide_port_ops cmd640_port_ops = { + .init_dev = cmd640_init_dev, +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED .set_pio_mode = cmd640_set_pio_mode, +#endif }; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ static int pci_conf1(void) { @@ -654,10 +687,8 @@ static const struct ide_port_info cmd640_port_info __initdata = { IDE_HFLAG_NO_DMA | IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_ABUSE_FAST_DEVSEL, -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED .port_ops = &cmd640_port_ops, .pio_mask = ATA_PIO5, -#endif }; static int cmd640x_init_one(unsigned long base, unsigned long ctl) @@ -683,12 +714,8 @@ static int cmd640x_init_one(unsigned long base, unsigned long ctl) */ static int __init cmd640x_init(void) { -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - int second_port_toggled = 0; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ int second_port_cmd640 = 0, rc; const char *bus_type, *port2; - unsigned int index; u8 b, cfr; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw[2]; @@ -774,88 +801,44 @@ static int __init cmd640x_init(void) put_cmd640_reg(CMDTIM, 0); put_cmd640_reg(BRST, 0x40); - cmd_hwif1 = ide_find_port(); + b = get_cmd640_reg(CNTRL); /* * Try to enable the secondary interface, if not already enabled */ - if (cmd_hwif1 && - cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) { - port2 = "not probed"; + if (secondary_port_responding()) { + if ((b & CNTRL_ENA_2ND)) { + second_port_cmd640 = 1; + port2 = "okay"; + } else if (cmd640_vlb) { + second_port_cmd640 = 1; + port2 = "alive"; + } else + port2 = "not cmd640"; } else { - b = get_cmd640_reg(CNTRL); + put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */ if (secondary_port_responding()) { - if ((b & CNTRL_ENA_2ND)) { - second_port_cmd640 = 1; - port2 = "okay"; - } else if (cmd640_vlb) { - second_port_cmd640 = 1; - port2 = "alive"; - } else - port2 = "not cmd640"; + second_port_cmd640 = 1; + port2 = "enabled"; } else { - put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */ - if (secondary_port_responding()) { - second_port_cmd640 = 1; -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - second_port_toggled = 1; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - port2 = "enabled"; - } else { - put_cmd640_reg(CNTRL, b); /* restore original setting */ - port2 = "not responding"; - } + put_cmd640_reg(CNTRL, b); /* restore original setting */ + port2 = "not responding"; } } /* * Initialize data for secondary cmd640 port, if enabled */ - if (second_port_cmd640 && cmd_hwif1) { - ide_init_port_hw(cmd_hwif1, &hw[1]); - idx[1] = cmd_hwif1->index; + if (second_port_cmd640) { + cmd_hwif1 = ide_find_port(); + if (cmd_hwif1) { + ide_init_port_hw(cmd_hwif1, &hw[1]); + idx[1] = cmd_hwif1->index; + } } printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n", second_port_cmd640 ? "" : "not ", port2); - /* - * Establish initial timings/prefetch for all drives. - * Do not unnecessarily disturb any prior BIOS setup of these. - */ - for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) { - ide_drive_t *drive; - - if (index > 1) { - if (cmd_hwif1 == NULL) - continue; - drive = &cmd_hwif1->drives[index & 1]; - } else { - if (cmd_hwif0 == NULL) - continue; - drive = &cmd_hwif0->drives[index & 1]; - } - -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - /* - * Reset timing to the slowest speed and turn off prefetch. - * This way, the drive identify code has a better chance. - */ - setup_counts [index] = 4; /* max possible */ - active_counts [index] = 16; /* max possible */ - recovery_counts [index] = 16; /* max possible */ - program_drive_counts(drive, index); - set_prefetch_mode(drive, index, 0); - printk("cmd640: drive%d timings/prefetch cleared\n", index); -#else - /* - * Set the drive unmask flags to match the prefetch setting - */ - check_prefetch(drive, index); - printk("cmd640: drive%d timings/prefetch(%s) preserved\n", - index, drive->no_io_32bit ? "off" : "on"); -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - } - #ifdef CMD640_DUMP_REGS cmd640_dump_regs(); #endif diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index ca4774aa27ee..cfa784bacf48 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -116,6 +116,7 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); unsigned int cycle_time; u8 setup_count, arttim = 0; @@ -124,10 +125,9 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) cycle_time = ide_pio_cycle_time(drive, pio); - program_cycle_times(drive, cycle_time, - ide_pio_timings[pio].active_time); + program_cycle_times(drive, cycle_time, t->active); - setup_count = quantize_timing(ide_pio_timings[pio].setup_time, + setup_count = quantize_timing(t->setup, 1000 / (ide_pci_clk ? ide_pci_clk : 33)); /* diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index 99fe91a191b8..dc97c48623f3 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -26,8 +26,6 @@ #include <linux/pci.h> #include <linux/ide.h> -#include "ide-timing.h" - #define MSR_ATAC_BASE 0x51300000 #define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) #define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) @@ -75,13 +73,11 @@ static unsigned int cs5535_udma_timings[5] = */ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) { - u32 reg = 0, dummy; int unit = drive->select.b.unit; - /* Set the PIO timings */ - if ((speed & XFER_MODE) == XFER_PIO) { + if (speed < XFER_SW_DMA_0) { ide_drive_t *pair = ide_get_paired_drive(drive); u8 cmd, pioa; diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 8c534afcb6c8..e14ad5530fa4 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -133,6 +133,7 @@ static int calc_clk(int time, int bus_speed) */ static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) { + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); int clk1, clk2; int bus_speed = ide_pci_clk ? ide_pci_clk : 33; @@ -141,15 +142,13 @@ static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) */ /* let's calc the address setup time clocks */ - p_pclk->address_time = (u8)calc_clk(ide_pio_timings[pio].setup_time, bus_speed); + p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed); /* let's calc the active and recovery time clocks */ - clk1 = calc_clk(ide_pio_timings[pio].active_time, bus_speed); + clk1 = calc_clk(t->active, bus_speed); /* calc recovery timing */ - clk2 = ide_pio_timings[pio].cycle_time - - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + clk2 = t->cycle - t->active - t->setup; clk2 = calc_clk(clk2, bus_speed); diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index af0f30051d5a..0106e2a2df77 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -93,7 +93,6 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) i = hwif->index; - ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); idx[0] = i; diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 6ab04115286b..cbf647202994 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -512,8 +512,14 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive) } static struct ide_dma_ops it821x_pass_through_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = it821x_dma_start, .dma_end = it821x_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_timeout = ide_dma_timeout, + .dma_lost_irq = ide_dma_lost_irq, }; /** diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 1584ebb6a185..789c66dfbde5 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -558,12 +558,9 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev, u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; int i; - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR "%s: too many IDE interfaces, " - "no room in table\n", SCC_PATA_NAME); + hwif = ide_find_port_slot(d); + if (hwif == NULL) return -ENOMEM; - } memset(&hw, 0, sizeof(hw)); for (i = 0; i <= 8; i++) @@ -572,7 +569,6 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev, hw.dev = &dev->dev; hw.chipset = ide_pci; ide_init_port_hw(hwif, &hw); - hwif->dev = &dev->dev; idx[0] = hwif->index; diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 24513e3dcd6b..c79ff5b41088 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -568,6 +568,7 @@ static const struct ide_dma_ops sgiioc4_dma_ops = { }; static const struct ide_port_info sgiioc4_port_info __devinitdata = { + .name = DRV_NAME, .chipset = ide_pci, .init_dma = ide_dma_sgiioc4, .port_ops = &sgiioc4_port_ops, @@ -587,13 +588,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) hw_regs_t hw; struct ide_port_info d = sgiioc4_port_info; - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", - DRV_NAME); - return -ENOMEM; - } - /* Get the CmdBlk and CtrlBlk Base Registers */ bar0 = pci_resource_start(dev, 0); virt_base = ioremap(bar0, pci_resource_len(dev, 0)); @@ -608,11 +602,11 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) cmd_phys_base = bar0 + IOC4_CMD_OFFSET; if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE, - hwif->name)) { + DRV_NAME)) { printk(KERN_ERR "%s : %s -- ERROR, Addresses " "0x%p to 0x%p ALREADY in use\n", - __func__, hwif->name, (void *) cmd_phys_base, + __func__, DRV_NAME, (void *) cmd_phys_base, (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE); return -ENOMEM; } @@ -623,9 +617,12 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) hw.irq = dev->irq; hw.chipset = ide_pci; hw.dev = &dev->dev; - ide_init_port_hw(hwif, &hw); - hwif->dev = &dev->dev; + hwif = ide_find_port_slot(&d); + if (hwif == NULL) + goto err; + + ide_init_port_hw(hwif, &hw); /* The IOC4 uses MMIO rather than Port IO. */ default_hwif_mmiops(hwif); @@ -641,6 +638,10 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) return -EIO; return 0; +err: + release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE); + iounmap(virt_base); + return -ENOMEM; } static unsigned int __devinit diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index b75e9bb390a7..6e9d7655d89c 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -421,8 +421,7 @@ static int sil_sata_reset_poll(ide_drive_t *drive) if ((sata_stat & 0x03) != 0x03) { printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n", hwif->name, sata_stat); - HWGROUP(drive)->polling = 0; - return ide_started; + return -ENXIO; } } diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index e127eb25ab63..2389945ca95d 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -52,8 +52,6 @@ #include <linux/init.h> #include <linux/ide.h> -#include "ide-timing.h" - /* registers layout and init values are chipset family dependant */ #define ATA_16 0x01 @@ -616,7 +614,6 @@ MODULE_LICENSE("GPL"); /* * TODO: * - CLEANUP - * - Use drivers/ide/ide-timing.h ! * - More checks in the config registers (force values instead of * relying on the BIOS setting them correctly). * - Further optimisations ? diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index ce84fa045d39..6efbde297174 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -47,10 +47,11 @@ */ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio) { + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); unsigned int cmd_on, cmd_off; u8 iordy = 0; - cmd_on = (ide_pio_timings[pio].active_time + 29) / 30; + cmd_on = (t->active + 29) / 30; cmd_off = (ide_pio_cycle_time(drive, pio) - 30 * cmd_on + 29) / 30; if (cmd_on == 0) diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 3ed9728abd24..e47384c70c40 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -35,8 +35,6 @@ #include <asm/processor.h> #endif -#include "ide-timing.h" - #define VIA_IDE_ENABLE 0x40 #define VIA_IDE_CONFIG 0x41 #define VIA_FIFO_CONFIG 0x43 diff --git a/drivers/ide/ppc/Makefile b/drivers/ide/ppc/Makefile index 65af5848b28c..74e52adcdf4b 100644 --- a/drivers/ide/ppc/Makefile +++ b/drivers/ide/ppc/Makefile @@ -1,3 +1,2 @@ obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o -obj-$(CONFIG_BLK_DEV_MPC8xx_IDE) += mpc8xx.o diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c deleted file mode 100644 index 236f9c38e519..000000000000 --- a/drivers/ide/ppc/mpc8xx.c +++ /dev/null @@ -1,851 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Wolfgang Denk, wd@denx.de - * Modified for direct IDE interface - * by Thomas Lange, thomas@corelatus.com - * Modified for direct IDE interface on 8xx without using the PCMCIA - * controller - * by Steven.Scholz@imc-berlin.de - * Moved out of arch/ppc/kernel/m8xx_setup.c, other minor cleanups - * by Mathew Locke <mattl@mvista.com> - */ - -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/tty.h> -#include <linux/major.h> -#include <linux/interrupt.h> -#include <linux/reboot.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/ide.h> -#include <linux/bootmem.h> - -#include <asm/mpc8xx.h> -#include <asm/mmu.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/ide.h> -#include <asm/8xx_immap.h> -#include <asm/machdep.h> -#include <asm/irq.h> - -#define DRV_NAME "ide-mpc8xx" - -static int identify (volatile u8 *p); -static void print_fixed (volatile u8 *p); -static void print_funcid (int func); -static int check_ide_device (unsigned long base); - -static void ide_interrupt_ack (void *dev); -static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio); - -typedef struct ide_ioport_desc { - unsigned long base_off; /* Offset to PCMCIA memory */ - unsigned long reg_off[IDE_NR_PORTS]; /* controller register offsets */ - int irq; /* IRQ */ -} ide_ioport_desc_t; - -ide_ioport_desc_t ioport_dsc[MAX_HWIFS] = { -#ifdef IDE0_BASE_OFFSET - { IDE0_BASE_OFFSET, - { - IDE0_DATA_REG_OFFSET, - IDE0_ERROR_REG_OFFSET, - IDE0_NSECTOR_REG_OFFSET, - IDE0_SECTOR_REG_OFFSET, - IDE0_LCYL_REG_OFFSET, - IDE0_HCYL_REG_OFFSET, - IDE0_SELECT_REG_OFFSET, - IDE0_STATUS_REG_OFFSET, - IDE0_CONTROL_REG_OFFSET, - IDE0_IRQ_REG_OFFSET, - }, - IDE0_INTERRUPT, - }, -#ifdef IDE1_BASE_OFFSET - { IDE1_BASE_OFFSET, - { - IDE1_DATA_REG_OFFSET, - IDE1_ERROR_REG_OFFSET, - IDE1_NSECTOR_REG_OFFSET, - IDE1_SECTOR_REG_OFFSET, - IDE1_LCYL_REG_OFFSET, - IDE1_HCYL_REG_OFFSET, - IDE1_SELECT_REG_OFFSET, - IDE1_STATUS_REG_OFFSET, - IDE1_CONTROL_REG_OFFSET, - IDE1_IRQ_REG_OFFSET, - }, - IDE1_INTERRUPT, - }, -#endif /* IDE1_BASE_OFFSET */ -#endif /* IDE0_BASE_OFFSET */ -}; - -ide_pio_timings_t ide_pio_clocks[6]; -int hold_time[6] = {30, 20, 15, 10, 10, 10 }; /* PIO Mode 5 with IORDY (nonstandard) */ - -/* - * Warning: only 1 (ONE) PCMCIA slot supported here, - * which must be correctly initialized by the firmware (PPCBoot). - */ -static int _slot_ = -1; /* will be read from PCMCIA registers */ - -/* Make clock cycles and always round up */ -#define PCMCIA_MK_CLKS( t, T ) (( (t) * ((T)/1000000) + 999U ) / 1000U ) - -#define M8XX_PCMCIA_CD2(slot) (0x10000000 >> (slot << 4)) -#define M8XX_PCMCIA_CD1(slot) (0x08000000 >> (slot << 4)) - -/* - * The TQM850L hardware has two pins swapped! Grrrrgh! - */ -#ifdef CONFIG_TQM850L -#define __MY_PCMCIA_GCRX_CXRESET PCMCIA_GCRX_CXOE -#define __MY_PCMCIA_GCRX_CXOE PCMCIA_GCRX_CXRESET -#else -#define __MY_PCMCIA_GCRX_CXRESET PCMCIA_GCRX_CXRESET -#define __MY_PCMCIA_GCRX_CXOE PCMCIA_GCRX_CXOE -#endif - -#if defined(CONFIG_BLK_DEV_MPC8xx_IDE) && defined(CONFIG_IDE_8xx_PCCARD) -#define PCMCIA_SCHLVL IDE0_INTERRUPT /* Status Change Interrupt Level */ -static int pcmcia_schlvl = PCMCIA_SCHLVL; -#endif - -/* - * See include/linux/ide.h for definition of hw_regs_t (p, base) - */ - -/* - * m8xx_ide_init_ports() for a direct IDE interface _using_ - * MPC8xx's internal PCMCIA interface - */ -#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) -static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) -{ - unsigned long *p = hw->io_ports_array; - int i; - - typedef struct { - ulong br; - ulong or; - } pcmcia_win_t; - volatile pcmcia_win_t *win; - volatile pcmconf8xx_t *pcmp; - - uint *pgcrx; - u32 pcmcia_phy_base; - u32 pcmcia_phy_end; - static unsigned long pcmcia_base = 0; - unsigned long base; - - *p = 0; - - pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia)); - - if (!pcmcia_base) { - /* - * Read out PCMCIA registers. Since the reset values - * are undefined, we sure hope that they have been - * set up by firmware - */ - - /* Scan all registers for valid settings */ - pcmcia_phy_base = 0xFFFFFFFF; - pcmcia_phy_end = 0; - /* br0 is start of brX and orX regs */ - win = (pcmcia_win_t *) \ - (&(((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0)); - for (i = 0; i < 8; i++) { - if (win->or & 1) { /* This bank is marked as valid */ - if (win->br < pcmcia_phy_base) { - pcmcia_phy_base = win->br; - } - if ((win->br + PCMCIA_MEM_SIZE) > pcmcia_phy_end) { - pcmcia_phy_end = win->br + PCMCIA_MEM_SIZE; - } - /* Check which slot that has been defined */ - _slot_ = (win->or >> 2) & 1; - - } /* Valid bank */ - win++; - } /* for */ - - printk ("PCMCIA slot %c: phys mem %08x...%08x (size %08x)\n", - 'A' + _slot_, - pcmcia_phy_base, pcmcia_phy_end, - pcmcia_phy_end - pcmcia_phy_base); - - if (!request_mem_region(pcmcia_phy_base, - pcmcia_phy_end - pcmcia_phy_base, - DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - pcmcia_base=(unsigned long)ioremap(pcmcia_phy_base, - pcmcia_phy_end-pcmcia_phy_base); - -#ifdef DEBUG - printk ("PCMCIA virt base: %08lx\n", pcmcia_base); -#endif - /* Compute clock cycles for PIO timings */ - for (i=0; i<6; ++i) { - bd_t *binfo = (bd_t *)__res; - - hold_time[i] = - PCMCIA_MK_CLKS (hold_time[i], - binfo->bi_busfreq); - ide_pio_clocks[i].setup_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].setup_time, - binfo->bi_busfreq); - ide_pio_clocks[i].active_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].active_time, - binfo->bi_busfreq); - ide_pio_clocks[i].cycle_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].cycle_time, - binfo->bi_busfreq); -#if 0 - printk ("PIO mode %d timings: %d/%d/%d => %d/%d/%d\n", - i, - ide_pio_clocks[i].setup_time, - ide_pio_clocks[i].active_time, - ide_pio_clocks[i].hold_time, - ide_pio_clocks[i].cycle_time, - ide_pio_timings[i].setup_time, - ide_pio_timings[i].active_time, - ide_pio_timings[i].hold_time, - ide_pio_timings[i].cycle_time); -#endif - } - } - - if (_slot_ == -1) { - printk ("PCMCIA slot has not been defined! Using A as default\n"); - _slot_ = 0; - } - -#ifdef CONFIG_IDE_8xx_PCCARD - -#ifdef DEBUG - printk ("PIPR = 0x%08X slot %c ==> mask = 0x%X\n", - pcmp->pcmc_pipr, - 'A' + _slot_, - M8XX_PCMCIA_CD1(_slot_) | M8XX_PCMCIA_CD2(_slot_) ); -#endif /* DEBUG */ - - if (pcmp->pcmc_pipr & (M8XX_PCMCIA_CD1(_slot_)|M8XX_PCMCIA_CD2(_slot_))) { - printk ("No card in slot %c: PIPR=%08x\n", - 'A' + _slot_, (u32) pcmp->pcmc_pipr); - return -ENODEV; /* No card in slot */ - } - - check_ide_device (pcmcia_base); - -#endif /* CONFIG_IDE_8xx_PCCARD */ - - base = pcmcia_base + ioport_dsc[data_port].base_off; -#ifdef DEBUG - printk ("base: %08x + %08x = %08x\n", - pcmcia_base, ioport_dsc[data_port].base_off, base); -#endif - - for (i = 0; i < IDE_NR_PORTS; ++i) { -#ifdef DEBUG - printk ("port[%d]: %08x + %08x = %08x\n", - i, - base, - ioport_dsc[data_port].reg_off[i], - i, base + ioport_dsc[data_port].reg_off[i]); -#endif - *p++ = base + ioport_dsc[data_port].reg_off[i]; - } - - hw->irq = ioport_dsc[data_port].irq; - hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack; - -#ifdef CONFIG_IDE_8xx_PCCARD - { - unsigned int reg; - - if (_slot_) - pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcrb; - else - pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcra; - - reg = *pgcrx; - reg |= mk_int_int_mask (pcmcia_schlvl) << 24; - reg |= mk_int_int_mask (pcmcia_schlvl) << 16; - *pgcrx = reg; - } -#endif /* CONFIG_IDE_8xx_PCCARD */ - - /* Enable Harddisk Interrupt, - * and make it edge sensitive - */ - /* (11-18) Set edge detect for irq, no wakeup from low power mode */ - ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |= - (0x80000000 >> ioport_dsc[data_port].irq); - -#ifdef CONFIG_IDE_8xx_PCCARD - /* Make sure we don't get garbage irq */ - ((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pscr = 0xFFFF; - - /* Enable falling edge irq */ - pcmp->pcmc_per = 0x100000 >> (16 * _slot_); -#endif /* CONFIG_IDE_8xx_PCCARD */ - - hw->chipset = ide_generic; - - return 0; -} -#endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */ - -/* - * m8xx_ide_init_ports() for a direct IDE interface _not_ using - * MPC8xx's internal PCMCIA interface - */ -#if defined(CONFIG_IDE_EXT_DIRECT) -static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) -{ - unsigned long *p = hw->io_ports_array; - int i; - - u32 ide_phy_base; - u32 ide_phy_end; - static unsigned long ide_base = 0; - unsigned long base; - - *p = 0; - - if (!ide_base) { - - /* TODO: - * - add code to read ORx, BRx - */ - ide_phy_base = CFG_ATA_BASE_ADDR; - ide_phy_end = CFG_ATA_BASE_ADDR + 0x200; - - printk ("IDE phys mem : %08x...%08x (size %08x)\n", - ide_phy_base, ide_phy_end, - ide_phy_end - ide_phy_base); - - if (!request_mem_region(ide_phy_base, 0x200, DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - ide_base=(unsigned long)ioremap(ide_phy_base, - ide_phy_end-ide_phy_base); - -#ifdef DEBUG - printk ("IDE virt base: %08lx\n", ide_base); -#endif - } - - base = ide_base + ioport_dsc[data_port].base_off; -#ifdef DEBUG - printk ("base: %08x + %08x = %08x\n", - ide_base, ioport_dsc[data_port].base_off, base); -#endif - - for (i = 0; i < IDE_NR_PORTS; ++i) { -#ifdef DEBUG - printk ("port[%d]: %08x + %08x = %08x\n", - i, - base, - ioport_dsc[data_port].reg_off[i], - i, base + ioport_dsc[data_port].reg_off[i]); -#endif - *p++ = base + ioport_dsc[data_port].reg_off[i]; - } - - /* direct connected IDE drive, i.e. external IRQ */ - hw->irq = ioport_dsc[data_port].irq; - hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack; - - /* Enable Harddisk Interrupt, - * and make it edge sensitive - */ - /* (11-18) Set edge detect for irq, no wakeup from low power mode */ - ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |= - (0x80000000 >> ioport_dsc[data_port].irq); - - hw->chipset = ide_generic; - - return 0; -} -#endif /* CONFIG_IDE_8xx_DIRECT */ - - -/* -------------------------------------------------------------------- */ - - -/* PCMCIA Timing */ -#ifndef PCMCIA_SHT -#define PCMCIA_SHT(t) ((t & 0x0F)<<16) /* Strobe Hold Time */ -#define PCMCIA_SST(t) ((t & 0x0F)<<12) /* Strobe Setup Time */ -#define PCMCIA_SL(t) ((t==32) ? 0 : ((t & 0x1F)<<7)) /* Strobe Length */ -#endif - -/* Calculate PIO timings */ -static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ -#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) - volatile pcmconf8xx_t *pcmp; - ulong timing, mask, reg; - - pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia)); - - mask = ~(PCMCIA_SHT(0xFF) | PCMCIA_SST(0xFF) | PCMCIA_SL(0xFF)); - - timing = PCMCIA_SHT(hold_time[pio] ) - | PCMCIA_SST(ide_pio_clocks[pio].setup_time ) - | PCMCIA_SL (ide_pio_clocks[pio].active_time) - ; - -#if 1 - printk ("Setting timing bits 0x%08lx in PCMCIA controller\n", timing); -#endif - if ((reg = pcmp->pcmc_por0 & mask) != 0) - pcmp->pcmc_por0 = reg | timing; - - if ((reg = pcmp->pcmc_por1 & mask) != 0) - pcmp->pcmc_por1 = reg | timing; - - if ((reg = pcmp->pcmc_por2 & mask) != 0) - pcmp->pcmc_por2 = reg | timing; - - if ((reg = pcmp->pcmc_por3 & mask) != 0) - pcmp->pcmc_por3 = reg | timing; - - if ((reg = pcmp->pcmc_por4 & mask) != 0) - pcmp->pcmc_por4 = reg | timing; - - if ((reg = pcmp->pcmc_por5 & mask) != 0) - pcmp->pcmc_por5 = reg | timing; - - if ((reg = pcmp->pcmc_por6 & mask) != 0) - pcmp->pcmc_por6 = reg | timing; - - if ((reg = pcmp->pcmc_por7 & mask) != 0) - pcmp->pcmc_por7 = reg | timing; - -#elif defined(CONFIG_IDE_EXT_DIRECT) - - printk("%s[%d] %s: not implemented yet!\n", - __FILE__, __LINE__, __func__); -#endif /* defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_PCMCIA */ -} - -static const struct ide_port_ops m8xx_port_ops = { - .set_pio_mode = m8xx_ide_set_pio_mode, -}; - -static void -ide_interrupt_ack (void *dev) -{ -#ifdef CONFIG_IDE_8xx_PCCARD - u_int pscr, pipr; - -#if (PCMCIA_SOCKETS_NO == 2) - u_int _slot_; -#endif - - /* get interrupt sources */ - - pscr = ((volatile immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr; - pipr = ((volatile immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr; - - /* - * report only if both card detect signals are the same - * not too nice done, - * we depend on that CD2 is the bit to the left of CD1... - */ - - if(_slot_==-1){ - printk("PCMCIA slot has not been defined! Using A as default\n"); - _slot_=0; - } - - if(((pipr & M8XX_PCMCIA_CD2(_slot_)) >> 1) ^ - (pipr & M8XX_PCMCIA_CD1(_slot_)) ) { - printk ("card detect interrupt\n"); - } - /* clear the interrupt sources */ - ((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr = pscr; - -#else /* ! CONFIG_IDE_8xx_PCCARD */ - /* - * Only CONFIG_IDE_8xx_PCCARD is using the interrupt of the - * MPC8xx's PCMCIA controller, so there is nothing to be done here - * for CONFIG_IDE_8xx_DIRECT and CONFIG_IDE_EXT_DIRECT. - * The interrupt is handled somewhere else. -- Steven - */ -#endif /* CONFIG_IDE_8xx_PCCARD */ -} - - - -/* - * CIS Tupel codes - */ -#define CISTPL_NULL 0x00 -#define CISTPL_DEVICE 0x01 -#define CISTPL_LONGLINK_CB 0x02 -#define CISTPL_INDIRECT 0x03 -#define CISTPL_CONFIG_CB 0x04 -#define CISTPL_CFTABLE_ENTRY_CB 0x05 -#define CISTPL_LONGLINK_MFC 0x06 -#define CISTPL_BAR 0x07 -#define CISTPL_PWR_MGMNT 0x08 -#define CISTPL_EXTDEVICE 0x09 -#define CISTPL_CHECKSUM 0x10 -#define CISTPL_LONGLINK_A 0x11 -#define CISTPL_LONGLINK_C 0x12 -#define CISTPL_LINKTARGET 0x13 -#define CISTPL_NO_LINK 0x14 -#define CISTPL_VERS_1 0x15 -#define CISTPL_ALTSTR 0x16 -#define CISTPL_DEVICE_A 0x17 -#define CISTPL_JEDEC_C 0x18 -#define CISTPL_JEDEC_A 0x19 -#define CISTPL_CONFIG 0x1a -#define CISTPL_CFTABLE_ENTRY 0x1b -#define CISTPL_DEVICE_OC 0x1c -#define CISTPL_DEVICE_OA 0x1d -#define CISTPL_DEVICE_GEO 0x1e -#define CISTPL_DEVICE_GEO_A 0x1f -#define CISTPL_MANFID 0x20 -#define CISTPL_FUNCID 0x21 -#define CISTPL_FUNCE 0x22 -#define CISTPL_SWIL 0x23 -#define CISTPL_END 0xff - -/* - * CIS Function ID codes - */ -#define CISTPL_FUNCID_MULTI 0x00 -#define CISTPL_FUNCID_MEMORY 0x01 -#define CISTPL_FUNCID_SERIAL 0x02 -#define CISTPL_FUNCID_PARALLEL 0x03 -#define CISTPL_FUNCID_FIXED 0x04 -#define CISTPL_FUNCID_VIDEO 0x05 -#define CISTPL_FUNCID_NETWORK 0x06 -#define CISTPL_FUNCID_AIMS 0x07 -#define CISTPL_FUNCID_SCSI 0x08 - -/* - * Fixed Disk FUNCE codes - */ -#define CISTPL_IDE_INTERFACE 0x01 - -#define CISTPL_FUNCE_IDE_IFACE 0x01 -#define CISTPL_FUNCE_IDE_MASTER 0x02 -#define CISTPL_FUNCE_IDE_SLAVE 0x03 - -/* First feature byte */ -#define CISTPL_IDE_SILICON 0x04 -#define CISTPL_IDE_UNIQUE 0x08 -#define CISTPL_IDE_DUAL 0x10 - -/* Second feature byte */ -#define CISTPL_IDE_HAS_SLEEP 0x01 -#define CISTPL_IDE_HAS_STANDBY 0x02 -#define CISTPL_IDE_HAS_IDLE 0x04 -#define CISTPL_IDE_LOW_POWER 0x08 -#define CISTPL_IDE_REG_INHIBIT 0x10 -#define CISTPL_IDE_HAS_INDEX 0x20 -#define CISTPL_IDE_IOIS16 0x40 - - -/* -------------------------------------------------------------------- */ - - -#define MAX_TUPEL_SZ 512 -#define MAX_FEATURES 4 - -static int check_ide_device (unsigned long base) -{ - volatile u8 *ident = NULL; - volatile u8 *feature_p[MAX_FEATURES]; - volatile u8 *p, *start; - int n_features = 0; - u8 func_id = ~0; - u8 code, len; - unsigned short config_base = 0; - int found = 0; - int i; - -#ifdef DEBUG - printk ("PCMCIA MEM: %08lX\n", base); -#endif - start = p = (volatile u8 *) base; - - while ((p - start) < MAX_TUPEL_SZ) { - - code = *p; p += 2; - - if (code == 0xFF) { /* End of chain */ - break; - } - - len = *p; p += 2; -#ifdef DEBUG_PCMCIA - { volatile u8 *q = p; - printk ("\nTuple code %02x length %d\n\tData:", - code, len); - - for (i = 0; i < len; ++i) { - printk (" %02x", *q); - q+= 2; - } - } -#endif /* DEBUG_PCMCIA */ - switch (code) { - case CISTPL_VERS_1: - ident = p + 4; - break; - case CISTPL_FUNCID: - func_id = *p; - break; - case CISTPL_FUNCE: - if (n_features < MAX_FEATURES) - feature_p[n_features++] = p; - break; - case CISTPL_CONFIG: - config_base = (*(p+6) << 8) + (*(p+4)); - default: - break; - } - p += 2 * len; - } - - found = identify (ident); - - if (func_id != ((u8)~0)) { - print_funcid (func_id); - - if (func_id == CISTPL_FUNCID_FIXED) - found = 1; - else - return (1); /* no disk drive */ - } - - for (i=0; i<n_features; ++i) { - print_fixed (feature_p[i]); - } - - if (!found) { - printk ("unknown card type\n"); - return (1); - } - - /* set level mode irq and I/O mapped device in config reg*/ - *((u8 *)(base + config_base)) = 0x41; - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -static void print_funcid (int func) -{ - switch (func) { - case CISTPL_FUNCID_MULTI: - printk (" Multi-Function"); - break; - case CISTPL_FUNCID_MEMORY: - printk (" Memory"); - break; - case CISTPL_FUNCID_SERIAL: - printk (" Serial Port"); - break; - case CISTPL_FUNCID_PARALLEL: - printk (" Parallel Port"); - break; - case CISTPL_FUNCID_FIXED: - printk (" Fixed Disk"); - break; - case CISTPL_FUNCID_VIDEO: - printk (" Video Adapter"); - break; - case CISTPL_FUNCID_NETWORK: - printk (" Network Adapter"); - break; - case CISTPL_FUNCID_AIMS: - printk (" AIMS Card"); - break; - case CISTPL_FUNCID_SCSI: - printk (" SCSI Adapter"); - break; - default: - printk (" Unknown"); - break; - } - printk (" Card\n"); -} - -/* ------------------------------------------------------------------------- */ - -static void print_fixed (volatile u8 *p) -{ - if (p == NULL) - return; - - switch (*p) { - case CISTPL_FUNCE_IDE_IFACE: - { u8 iface = *(p+2); - - printk ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown"); - printk (" interface "); - break; - } - case CISTPL_FUNCE_IDE_MASTER: - case CISTPL_FUNCE_IDE_SLAVE: - { u8 f1 = *(p+2); - u8 f2 = *(p+4); - - printk ((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]"); - - if (f1 & CISTPL_IDE_UNIQUE) - printk (" [unique]"); - - printk ((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]"); - - if (f2 & CISTPL_IDE_HAS_SLEEP) - printk (" [sleep]"); - - if (f2 & CISTPL_IDE_HAS_STANDBY) - printk (" [standby]"); - - if (f2 & CISTPL_IDE_HAS_IDLE) - printk (" [idle]"); - - if (f2 & CISTPL_IDE_LOW_POWER) - printk (" [low power]"); - - if (f2 & CISTPL_IDE_REG_INHIBIT) - printk (" [reg inhibit]"); - - if (f2 & CISTPL_IDE_HAS_INDEX) - printk (" [index]"); - - if (f2 & CISTPL_IDE_IOIS16) - printk (" [IOis16]"); - - break; - } - } - printk ("\n"); -} - -/* ------------------------------------------------------------------------- */ - - -#define MAX_IDENT_CHARS 64 -#define MAX_IDENT_FIELDS 4 - -static u8 *known_cards[] = { - "ARGOSY PnPIDE D5", - NULL -}; - -static int identify (volatile u8 *p) -{ - u8 id_str[MAX_IDENT_CHARS]; - u8 data; - u8 *t; - u8 **card; - int i, done; - - if (p == NULL) - return (0); /* Don't know */ - - t = id_str; - done =0; - - for (i=0; i<=4 && !done; ++i, p+=2) { - while ((data = *p) != '\0') { - if (data == 0xFF) { - done = 1; - break; - } - *t++ = data; - if (t == &id_str[MAX_IDENT_CHARS-1]) { - done = 1; - break; - } - p += 2; - } - if (!done) - *t++ = ' '; - } - *t = '\0'; - while (--t > id_str) { - if (*t == ' ') - *t = '\0'; - else - break; - } - printk ("Card ID: %s\n", id_str); - - for (card=known_cards; *card; ++card) { - if (strcmp(*card, id_str) == 0) { /* found! */ - return (1); - } - } - - return (0); /* don't know */ -} - -static int __init mpc8xx_ide_probe(void) -{ - hw_regs_t hw; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - -#ifdef IDE0_BASE_OFFSET - memset(&hw, 0, sizeof(hw)); - if (!m8xx_ide_init_ports(&hw, 0)) { - ide_hwif_t *hwif = ide_find_port(); - - if (hwif) { - ide_init_port_hw(hwif, &hw); - hwif->pio_mask = ATA_PIO4; - hwif->port_ops = &m8xx_port_ops; - - idx[0] = hwif->index; - } - } -#ifdef IDE1_BASE_OFFSET - memset(&hw, 0, sizeof(hw)); - if (!m8xx_ide_init_ports(&hw, 1)) { - ide_hwif_t *mate = ide_find_port(); - - if (mate) { - ide_init_port_hw(mate, &hw); - mate->pio_mask = ATA_PIO4; - mate->port_ops = &m8xx_port_ops; - - idx[1] = mate->index; - } - } -#endif -#endif - - ide_device_add(idx, NULL); - - return 0; -} - -module_init(mpc8xx_ide_probe); - -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index dcb2c466bb97..93fb9067c043 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -5,7 +5,7 @@ * for doing DMA. * * Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -48,8 +48,6 @@ #include <asm/mediabay.h> #endif -#include "../ide-timing.h" - #undef IDE_PMAC_DEBUG #define DMA_WAIT_TIMEOUT 50 @@ -495,6 +493,7 @@ static void pmac_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port) static void pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) { + struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); u32 *timings, t; unsigned accessTicks, recTicks; unsigned accessTime, recTime; @@ -526,10 +525,9 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) } case controller_kl_ata4: /* 66Mhz cell */ - recTime = cycle_time - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + recTime = cycle_time - tim->active - tim->setup; recTime = max(recTime, 150U); - accessTime = ide_pio_timings[pio].active_time; + accessTime = tim->active; accessTime = max(accessTime, 150U); accessTicks = SYSCLK_TICKS_66(accessTime); accessTicks = min(accessTicks, 0x1fU); @@ -542,10 +540,9 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) default: { /* 33Mhz cell */ int ebit = 0; - recTime = cycle_time - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + recTime = cycle_time - tim->active - tim->setup; recTime = max(recTime, 150U); - accessTime = ide_pio_timings[pio].active_time; + accessTime = tim->active; accessTime = max(accessTime, 150U); accessTicks = SYSCLK_TICKS(accessTime); accessTicks = min(accessTicks, 0x1fU); @@ -1151,8 +1148,6 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) base = ioremap(macio_resource_start(mdev, 0), 0x400); regbase = (unsigned long) base; - hwif->dev = &mdev->bus->pdev->dev; - pmif->mdev = mdev; pmif->node = mdev->ofdev.node; pmif->regbase = regbase; @@ -1174,7 +1169,8 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) memset(&hw, 0, sizeof(hw)); pmac_ide_init_ports(&hw, pmif->regbase); hw.irq = irq; - hw.dev = &mdev->ofdev.dev; + hw.dev = &mdev->bus->pdev->dev; + hw.parent = &mdev->ofdev.dev; rc = pmac_ide_setup_device(pmif, hwif, &hw); if (rc != 0) { @@ -1274,7 +1270,6 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) goto out_free_pmif; } - hwif->dev = &pdev->dev; pmif->mdev = NULL; pmif->node = np; diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index abcfb1739d4d..65fc08b6b6d0 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -6,19 +6,15 @@ * May be copied or modified under the terms of the GNU General Public License */ -#include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/pci.h> #include <linux/init.h> -#include <linux/timer.h> -#include <linux/mm.h> #include <linux/interrupt.h> #include <linux/ide.h> #include <linux/dma-mapping.h> #include <asm/io.h> -#include <asm/irq.h> /** * ide_setup_pci_baseregs - place a PCI IDE controller native @@ -319,25 +315,22 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, ctl = pci_resource_start(dev, 2*port+1); base = pci_resource_start(dev, 2*port); - if ((ctl && !base) || (base && !ctl)) { - printk(KERN_ERR "%s: inconsistent baseregs (BIOS) " - "for port %d, skipping\n", d->name, port); - return NULL; - } - } - if (!ctl) { + } else { /* Use default values */ ctl = port ? 0x374 : 0x3f4; base = port ? 0x170 : 0x1f0; } - hwif = ide_find_port_slot(d); - if (hwif == NULL) { - printk(KERN_ERR "%s: too many IDE interfaces, no room in " - "table\n", d->name); + if (!base || !ctl) { + printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n", + d->name, port); return NULL; } + hwif = ide_find_port_slot(d); + if (hwif == NULL) + return NULL; + memset(&hw, 0, sizeof(hw)); hw.irq = irq; hw.dev = &dev->dev; @@ -346,8 +339,6 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, ide_init_port_hw(hwif, &hw); - hwif->dev = &dev->dev; - return hwif; } diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 683bce375c74..f843c1383a4b 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -258,19 +258,6 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) return ide_stopped; } -static ide_startstop_t -idescsi_atapi_abort(ide_drive_t *drive, struct request *rq) -{ - debug_log("%s called for %lu\n", __func__, - ((struct ide_atapi_pc *) rq->special)->scsi_cmd->serial_number); - - rq->errors |= ERROR_MAX; - - idescsi_end_request(drive, 0, 0); - - return ide_stopped; -} - static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); @@ -524,7 +511,6 @@ static ide_driver_t idescsi_driver = { .do_request = idescsi_do_request, .end_request = idescsi_end_request, .error = idescsi_atapi_error, - .abort = idescsi_atapi_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idescsi_proc, #endif diff --git a/include/linux/ide.h b/include/linux/ide.h index ac4eeb2932ef..4726126f5a59 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -139,6 +139,12 @@ struct ide_io_ports { #define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */ /* + * Op codes for special requests to be handled by ide_special_rq(). + * Values should be in the range of 0x20 to 0x3f. + */ +#define REQ_DRIVE_RESET 0x20 + +/* * Check for an interrupt and acknowledge the interrupt status */ struct hwif_s; @@ -171,7 +177,7 @@ typedef struct hw_regs_s { int irq; /* our irq number */ ide_ack_intr_t *ack_intr; /* acknowledge interrupt */ hwif_chipset_t chipset; - struct device *dev; + struct device *dev, *parent; } hw_regs_t; void ide_init_port_data(struct hwif_s *, unsigned int); @@ -405,8 +411,8 @@ typedef struct ide_drive_s { struct ide_port_info; struct ide_port_ops { - /* host specific initialization of devices on a port */ - void (*port_init_devs)(struct hwif_s *); + /* host specific initialization of a device */ + void (*init_dev)(ide_drive_t *); /* routine to program host for PIO mode */ void (*set_pio_mode)(ide_drive_t *, const u8); /* routine to program host for DMA mode */ @@ -565,8 +571,6 @@ typedef struct hwgroup_s { unsigned int sleeping : 1; /* BOOL: polling active & poll_timeout field valid */ unsigned int polling : 1; - /* BOOL: in a polling reset situation. Must not trigger another reset yet */ - unsigned int resetting : 1; /* current drive */ ide_drive_t *drive; @@ -786,7 +790,6 @@ struct ide_driver_s { ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t); int (*end_request)(ide_drive_t *, int, int); ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8); - ide_startstop_t (*abort)(ide_drive_t *, struct request *rq); struct device_driver gen_driver; int (*probe)(ide_drive_t *); void (*remove)(ide_drive_t *); @@ -801,18 +804,6 @@ struct ide_driver_s { int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long); -/* - * ide_hwifs[] is the master data structure used to keep track - * of just about everything in ide.c. Whenever possible, routines - * should be using pointers to a drive (ide_drive_t *) or - * pointers to a hwif (ide_hwif_t *), rather than indexing this - * structure directly (the allocation/layout may change!). - * - */ -#ifndef _IDE_C -extern ide_hwif_t ide_hwifs[]; /* master data repository */ -#endif - extern int ide_vlb_clk; extern int ide_pci_clk; @@ -840,10 +831,6 @@ ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8); ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat); -ide_startstop_t __ide_abort(ide_drive_t *, struct request *); - -extern ide_startstop_t ide_abort(ide_drive_t *, const char *); - extern void ide_fix_driveid(struct hd_driveid *); extern void ide_fixstring(u8 *, const int, const int); @@ -1271,16 +1258,43 @@ static inline int ide_dev_is_sata(struct hd_driveid *id) u64 ide_get_lba_addr(struct ide_taskfile *, int); u8 ide_dump_status(ide_drive_t *, const char *, u8); -typedef struct ide_pio_timings_s { - int setup_time; /* Address setup (ns) minimum */ - int active_time; /* Active pulse (ns) minimum */ - int cycle_time; /* Cycle time (ns) minimum = */ - /* active + recovery (+ setup for some chips) */ -} ide_pio_timings_t; +struct ide_timing { + u8 mode; + u8 setup; /* t1 */ + u16 act8b; /* t2 for 8-bit io */ + u16 rec8b; /* t2i for 8-bit io */ + u16 cyc8b; /* t0 for 8-bit io */ + u16 active; /* t2 or tD */ + u16 recover; /* t2i or tK */ + u16 cycle; /* t0 */ + u16 udma; /* t2CYCTYP/2 */ +}; + +enum { + IDE_TIMING_SETUP = (1 << 0), + IDE_TIMING_ACT8B = (1 << 1), + IDE_TIMING_REC8B = (1 << 2), + IDE_TIMING_CYC8B = (1 << 3), + IDE_TIMING_8BIT = IDE_TIMING_ACT8B | IDE_TIMING_REC8B | + IDE_TIMING_CYC8B, + IDE_TIMING_ACTIVE = (1 << 4), + IDE_TIMING_RECOVER = (1 << 5), + IDE_TIMING_CYCLE = (1 << 6), + IDE_TIMING_UDMA = (1 << 7), + IDE_TIMING_ALL = IDE_TIMING_SETUP | IDE_TIMING_8BIT | + IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER | + IDE_TIMING_CYCLE | IDE_TIMING_UDMA, +}; + +struct ide_timing *ide_timing_find_mode(u8); +u16 ide_pio_cycle_time(ide_drive_t *, u8); +void ide_timing_merge(struct ide_timing *, struct ide_timing *, + struct ide_timing *, unsigned int); +int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int); + +int ide_scan_pio_blacklist(char *); -unsigned int ide_pio_cycle_time(ide_drive_t *, u8); u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8); -extern const ide_pio_timings_t ide_pio_timings[6]; int ide_set_pio_mode(ide_drive_t *, u8); int ide_set_dma_mode(ide_drive_t *, u8); |
