diff options
88 files changed, 10029 insertions, 1844 deletions
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt index 555c8cf3650a..af3b925ece08 100644 --- a/Documentation/cpu-freq/user-guide.txt +++ b/Documentation/cpu-freq/user-guide.txt @@ -45,6 +45,7 @@ The following ARM processors are supported by cpufreq: ARM Integrator ARM-SA1100 ARM-SA1110 +Intel PXA 1.2 x86 diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6835a4c8affa..de211ac3853e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -356,6 +356,7 @@ config ARCH_PXA select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS + select TICK_ONESHOT help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. @@ -895,7 +896,7 @@ config KEXEC endmenu -if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX ) +if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA) menu "CPU Frequency scaling" @@ -931,6 +932,12 @@ config CPU_FREQ_IMX If in doubt, say N. +config CPU_FREQ_PXA + bool + depends on CPU_FREQ && ARCH_PXA && PXA25x + default y + select CPU_FREQ_DEFAULT_GOV_USERSPACE + endmenu endif diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_defconfig new file mode 100644 index 000000000000..c3e3418ed4fe --- /dev/null +++ b/arch/arm/configs/colibri_defconfig @@ -0,0 +1,1481 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc3 +# Mon Dec 3 13:36:09 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LSF=y +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +CONFIG_MACH_COLIBRI=y +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_ARMCORE is not set +CONFIG_PXA27x=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_PXA_FICP is not set +# CONFIG_MCS_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=y +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=y +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +CONFIG_MTD_CFI_LE_BYTE_SWAP=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +CONFIG_MTD_PXA2XX=y +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_DISKONCHIP=y +CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y +CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000 +CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y +CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y +# CONFIG_MTD_NAND_SHARPSL is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_ONENAND=y +# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set +# CONFIG_MTD_ONENAND_GENERIC is not set +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=8 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +CONFIG_DM9000=y +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=y +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +# CONFIG_ZD1211RW is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_SERIAL=m +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +CONFIG_TOUCHSCREEN_UCB1400=y +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_PXA is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SA1100_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +CONFIG_USB_GADGET_DUMMY_HCD=y +CONFIG_USB_DUMMY_HCD=m +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_PXA is not set +CONFIG_NEW_LEDS=y +# CONFIG_LEDS_CLASS is not set + +# +# LED drivers +# + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +CONFIG_RTC_DRV_PCF8583=m +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SA1100 is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=1 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_FS_WBUF_VERIFY=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-15" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_REED_SOLOMON=y +CONFIG_REED_SOLOMON_DEC16=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig new file mode 100644 index 000000000000..ed487b90dbed --- /dev/null +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -0,0 +1,1499 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.21-hh17 +# Fri Nov 9 20:23:03 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_BOARD_IRQ_MAP_SMALL is not set +CONFIG_BOARD_IRQ_MAP_BIG=y +CONFIG_DMABOUNCE=y + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_TOSHIBA_TMIO_OHCI=y +CONFIG_ARCH_ESERIES=y +CONFIG_MACH_E330=y +CONFIG_MACH_E740=y +CONFIG_MACH_E750=y +CONFIG_MACH_E400=y +CONFIG_MACH_E800=y +CONFIG_E330_LCD=y +CONFIG_E740_LCD=y +CONFIG_E750_LCD=y +CONFIG_E400_LCD=y +CONFIG_E800_LCD=y +CONFIG_ESERIES_UDC=y +CONFIG_E330_TC6387XB=y +CONFIG_E740_T7L66XB=y +CONFIG_E400_T7L66XB=y +CONFIG_E750_E800_TC6393XB=y +CONFIG_E740_PCMCIA=m +CONFIG_E750_PCMCIA=m +CONFIG_E800_PCMCIA=m +# CONFIG_MACH_A620 is not set +# CONFIG_MACH_A716 is not set +# CONFIG_MACH_A730 is not set +# CONFIG_ARCH_H1900 is not set +# CONFIG_ARCH_H2200 is not set +# CONFIG_MACH_H3900 is not set +# CONFIG_MACH_H4000 is not set +# CONFIG_MACH_H4700 is not set +# CONFIG_MACH_HX2750 is not set +# CONFIG_ARCH_H5400 is not set +# CONFIG_MACH_HIMALAYA is not set +# CONFIG_MACH_HTCUNIVERSAL is not set +# CONFIG_MACH_HTCALPINE is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_HTCAPACHE is not set +# CONFIG_MACH_BLUEANGEL is not set + +# +# HTC_HW6X00 +# +# CONFIG_MACH_HTCBEETLES is not set +# CONFIG_MACH_HW6900 is not set +# CONFIG_MACH_HTCATHENA is not set +# CONFIG_ARCH_AXIMX3 is not set +# CONFIG_ARCH_AXIMX5 is not set +# CONFIG_MACH_X50 is not set +# CONFIG_ARCH_ROVERP1 is not set +# CONFIG_ARCH_ROVERP5P is not set +# CONFIG_MACH_XSCALE_PALMLD is not set +# CONFIG_MACH_T3XSCALE is not set +# CONFIG_MACH_RECON is not set +# CONFIG_MACH_GHI270HG is not set +# CONFIG_MACH_GHI270 is not set +# CONFIG_MACH_LOOXC550 is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +CONFIG_PXA25x=y + +# +# Linux As Bootloader +# +# CONFIG_LAB is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=m + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +# CONFIG_TXTOFFSET_DELTA is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set +# CONFIG_DPM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +# CONFIG_PACKET is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_IEEE80211_SOFTMAC is not set +CONFIG_WIRELESS_EXT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=m +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_SHARPSL is not set +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=6144 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=m + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=m +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=m +# CONFIG_HOSTAP_FIRMWARE is not set +# CONFIG_HOSTAP_CS is not set +# CONFIG_ACX is not set +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=m +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_LED_TRIGGER is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_WM9705=y +CONFIG_TOUCHSCREEN_WM9712=y +CONFIG_TOUCHSCREEN_WM9713=y +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_PXA is not set +# CONFIG_RS232_SERIAL is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_SA1100_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_TIHTC is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set +# CONFIG_POWER_SUPPLY is not set + +# +# L3 serial bus support +# +# CONFIG_L3 is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# +# CONFIG_ADC is not set + +# +# Compaq/iPAQ Drivers +# + +# +# Compaq/HP iPAQ Drivers +# +# CONFIG_IPAQ_SLEEVE is not set +# CONFIG_SLEEVE_DEBUG is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_ASIC2 is not set +# CONFIG_HTC_ASIC3 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_BBKEYS is not set +# CONFIG_HTC_ASIC3_DS1WM is not set +# CONFIG_SOC_SAMCOP is not set +# CONFIG_SOC_HAMCOP is not set +# CONFIG_SOC_MQ11XX is not set +CONFIG_SOC_T7L66XB=y +# CONFIG_SOC_TC6387XB is not set +CONFIG_SOC_TC6393XB=y +# CONFIG_SOC_TSC2101 is not set +# CONFIG_SOC_TSC2200 is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_IMAGEON is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +CONFIG_FB_W100=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_VSFB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +CONFIG_FONT_ACORN_8x8=y +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set +# CONFIG_SND_RECON is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# SoC audio support +# +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC=m + +# +# SoC Platforms +# + +# +# SoC Audio for the Atmel AT91 +# + +# +# SoC Audio for the Intel PXA2xx +# +CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_PXA2XX_SOC_AC97=m +CONFIG_SND_PXA2XX_SOC_E740_WM9705=m +CONFIG_SND_PXA2XX_SOC_E750_WM9705=m +CONFIG_SND_PXA2XX_SOC_E800_WM9712=m +# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set +# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set +# CONFIG_SND_PXA2XX_SOC_H5000 is not set + +# +# SoC Audio for the Freescale i.MX +# + +# +# SoC Audio for the Samsung S3C24XX +# +# CONFIG_SND_SOC_AC97_CODEC is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8772 is not set +# CONFIG_SND_SOC_WM8971 is not set +# CONFIG_SND_SOC_WM8956 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8976 is not set +# CONFIG_SND_SOC_WM8974 is not set +# CONFIG_SND_SOC_WM8980 is not set +CONFIG_SND_SOC_WM9705=m +# CONFIG_SND_SOC_WM9713 is not set +CONFIG_SND_SOC_WM9712=m +# CONFIG_SND_SOC_UDA1380 is not set +# CONFIG_SND_SOC_AK4535 is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_MQ11XX is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_CHAR is not set +# CONFIG_USB_PXA2XX_GPIO is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_PXA is not set +CONFIG_MMC_TMIO=y +# CONFIG_MMC_SAMCOP is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/arm/configs/littleton_defconfig b/arch/arm/configs/littleton_defconfig new file mode 100644 index 000000000000..1db496908052 --- /dev/null +++ b/arch/arm/configs/littleton_defconfig @@ -0,0 +1,783 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc5 +# Fri Dec 21 11:06:19 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# + +# +# Supported PXA3xx Processor Variants +# +CONFIG_CPU_PXA300=y +CONFIG_CPU_PXA310=y +# CONFIG_CPU_PXA320 is not set +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_ZYLONITE is not set +CONFIG_MACH_LITTLETON=y +# CONFIG_MACH_ARMCORE is not set +CONFIG_PXA3xx=y +CONFIG_PXA_SSP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSC3=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_IO_36=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig new file mode 100644 index 000000000000..17b9b2469570 --- /dev/null +++ b/arch/arm/configs/pcm027_defconfig @@ -0,0 +1,1096 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Fri Dec 21 10:52:09 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_ARMCORE is not set +CONFIG_MACH_PCM027=y +CONFIG_MACH_PCM990_BASEBOARD=y +CONFIG_PXA27x=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PXA2XX is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=y +CONFIG_SND_PXA2XX_AC97=y + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=m +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=m + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +CONFIG_FS_MBCACHE=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-15" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index d5f6ea14fc7b..f550b19e1ecd 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -76,7 +76,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = INT_730_MPU_EXT_NIRQ, .end = 0, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 9393824cc150..bfa04fa25524 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -209,7 +209,7 @@ static struct resource h2_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(0), .end = OMAP_GPIO_IRQ(0), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 978cdab16535..056519860565 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -208,7 +208,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(40), .end = OMAP_GPIO_IRQ(40), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 7e63a41e37c6..7d2d8af155a3 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -202,7 +202,7 @@ static struct resource innovator1510_smc91x_resources[] = { [1] = { .start = OMAP1510_INT_ETHER, .end = OMAP1510_INT_ETHER, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -269,7 +269,7 @@ static struct resource innovator1610_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(0), .end = OMAP_GPIO_IRQ(0), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 4e016179f312..84333440008c 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -111,7 +111,7 @@ static struct resource osk5912_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(0), .end = OMAP_GPIO_IRQ(0), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index e44437e10eef..534dcfb9d263 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -75,7 +75,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = INT_730_MPU_EXT_NIRQ, .end = 0, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 214dd19889ac..c82a1cd20ad4 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -117,7 +117,7 @@ static struct resource voiceblue_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(8), .end = OMAP_GPIO_IRQ(8), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 7e76fbf19b5d..64235dee5614 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -104,7 +104,7 @@ static struct resource sdp2430_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 94e38cc2bb6c..7846551f0575 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -126,7 +126,7 @@ static struct resource apollon_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ), .end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 656d49661a29..0908bea0f609 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -51,6 +51,50 @@ config PXA_SHARPSL SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. +config ARCH_PXA_ESERIES + bool "PXA based Toshiba e-series PDAs" + select PXA25x + +config MACH_E330 + bool "Toshiba e330" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e330 family PDA. + +config MACH_E740 + bool "Toshiba e740" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e740 family PDA. + +config MACH_E750 + bool "Toshiba e750" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e750 family PDA. + +config MACH_E400 + bool "Toshiba e400" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e400 family PDA. + +config MACH_E800 + bool "Toshiba e800" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e800 family PDA. + config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" select PXA27x @@ -59,15 +103,44 @@ config MACH_EM_X270 bool "CompuLab EM-x270 platform" select PXA27x +config MACH_COLIBRI + bool "Toradex Colibri PX27x" + select PXA27x + config MACH_ZYLONITE bool "PXA3xx Development Platform" select PXA3xx +config MACH_LITTLETON + bool "PXA3xx Form Factor Platform (aka Littleton)" + select PXA3xx + select PXA_SSP + config MACH_ARMCORE bool "CompuLab CM-X270 modules" select PXA27x select IWMMXT +config MACH_MAGICIAN + bool "Enable HTC Magician Support" + depends on ARCH_PXA + select PXA27x + select IWMMXT + +config MACH_PCM027 + bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" + select PXA27x + select IWMMXT + +endchoice + +choice + prompt "Used baseboard" + depends on MACH_PCM027 + +config MACH_PCM990_BASEBOARD + bool "PHYTEC PCM-990 development board" + endchoice if PXA_SHARPSL diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 4263527e5123..b5c916c0747d 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -3,7 +3,7 @@ # # Common support (must be linked before board specific support) -obj-y += clock.o generic.o irq.o dma.o time.o +obj-y += clock.o devices.o generic.o irq.o dma.o time.o obj-$(CONFIG_PXA25x) += pxa25x.o obj-$(CONFIG_PXA27x) += pxa27x.o obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o @@ -16,18 +16,24 @@ obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o +obj-$(CONFIG_MACH_COLIBRI) += colibri.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o +obj-$(CONFIG_MACH_PCM027) += pcm027.o +obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_EM_X270) += em-x270.o +obj-$(CONFIG_MACH_MAGICIAN) += magician.o +obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o ifeq ($(CONFIG_MACH_ZYLONITE),y) obj-y += zylonite.o obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o endif +obj-$(CONFIG_MACH_LITTLETON) += littleton.o obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o @@ -41,13 +47,10 @@ led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o obj-$(CONFIG_LEDS) += $(led-y) # Misc features -obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM) += pm.o sleep.o standby.o +obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o obj-$(CONFIG_PXA_SSP) += ssp.o -ifeq ($(CONFIG_PXA27x),y) -obj-$(CONFIG_PM) += standby.o -endif - ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o endif diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index a16349272f54..28cfd71c032d 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -487,18 +487,15 @@ static int cmx270_mci_init(struct device *dev, /* card detect IRQ on GPIO 83 */ pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ)); - set_irq_type(CMX270_MMC_IRQ, IRQT_FALLING); err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "MMC card detect", data); - if (err) { + if (err) printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't" " request MMC card detect IRQ\n"); - return -1; - } - return 0; + return err; } static void cmx270_mci_setpower(struct device *dev, unsigned int vdd) diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c new file mode 100644 index 000000000000..6db54e31c397 --- /dev/null +++ b/arch/arm/mach-pxa/colibri.c @@ -0,0 +1,134 @@ +/* + * linux/arch/arm/mach-pxa/colibri.c + * + * Support for Toradex PXA27x based Colibri module + * Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/bitops.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/sizes.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/flash.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/colibri.h> + +#include "generic.h" +#include "devices.h" + +/* + * Flash + */ +static struct mtd_partition colibri_partitions[] = { + { + .name = "Bootloader", + .offset = 0x00000000, + .size = 0x00040000, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, { + .name = "Kernel", + .offset = 0x00040000, + .size = 0x00400000, + .mask_flags = 0 + }, { + .name = "Rootfs", + .offset = 0x00440000, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct physmap_flash_data colibri_flash_data[] = { + { + .width = 4, /* bankwidth in bytes */ + .parts = colibri_partitions, + .nr_parts = ARRAY_SIZE(colibri_partitions) + } +}; + +static struct resource flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = colibri_flash_data, + }, + .resource = &flash_resource, + .num_resources = 1, +}; + +/* + * DM9000 Ethernet + */ +static struct resource dm9000_resources[] = { + [0] = { + .start = COLIBRI_ETH_PHYS, + .end = COLIBRI_ETH_PHYS + 3, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = COLIBRI_ETH_PHYS + 4, + .end = COLIBRI_ETH_PHYS + 4 + 500, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = COLIBRI_ETH_IRQ, + .end = COLIBRI_ETH_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, +}; + +static struct platform_device *colibri_devices[] __initdata = { + &flash_device, + &dm9000_device, +}; + +static void __init colibri_init(void) +{ + /* DM9000 LAN */ + pxa_gpio_mode(GPIO78_nCS_2_MD); + pxa_gpio_mode(GPIO_DM9000 | GPIO_IN); + set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING); + + platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices)); +} + +MACHINE_START(COLIBRI, "Toradex Colibri PXA27x") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = COLIBRI_SDRAM_BASE + 0x100, + .init_machine = colibri_init, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, +MACHINE_END diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 2363cc64fe07..9292576b83b3 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -21,6 +21,7 @@ #include <linux/mmc/host.h> #include <linux/pm.h> #include <linux/backlight.h> +#include <video/w100fb.h> #include <asm/setup.h> #include <asm/memory.h> @@ -141,6 +142,136 @@ struct corgissp_machinfo corgi_ssp_machinfo = { /* + * LCD/Framebuffer + */ +static void w100_lcdtg_suspend(struct w100fb_par *par) +{ + corgi_lcdtg_suspend(); +} + +static void w100_lcdtg_init(struct w100fb_par *par) +{ + corgi_lcdtg_hw_init(par->xres); +} + + +static struct w100_tg_info corgi_lcdtg_info = { + .change = w100_lcdtg_init, + .suspend = w100_lcdtg_suspend, + .resume = w100_lcdtg_init, +}; + +static struct w100_mem_info corgi_fb_mem = { + .ext_cntl = 0x00040003, + .sdram_mode_reg = 0x00650021, + .ext_timing_cntl = 0x10002a4a, + .io_cntl = 0x7ff87012, + .size = 0x1fffff, +}; + +static struct w100_gen_regs corgi_fb_regs = { + .lcd_format = 0x00000003, + .lcdd_cntl1 = 0x01CC0000, + .lcdd_cntl2 = 0x0003FFFF, + .genlcd_cntl1 = 0x00FFFF0D, + .genlcd_cntl2 = 0x003F3003, + .genlcd_cntl3 = 0x000102aa, +}; + +static struct w100_gpio_regs corgi_fb_gpio = { + .init_data1 = 0x000000bf, + .init_data2 = 0x00000000, + .gpio_dir1 = 0x00000000, + .gpio_oe1 = 0x03c0feff, + .gpio_dir2 = 0x00000000, + .gpio_oe2 = 0x00000000, +}; + +static struct w100_mode corgi_fb_modes[] = { +{ + .xres = 480, + .yres = 640, + .left_margin = 0x56, + .right_margin = 0x55, + .upper_margin = 0x03, + .lower_margin = 0x00, + .crtc_ss = 0x82360056, + .crtc_ls = 0xA0280000, + .crtc_gs = 0x80280028, + .crtc_vpos_gs = 0x02830002, + .crtc_rev = 0x00400008, + .crtc_dclk = 0xA0000000, + .crtc_gclk = 0x8015010F, + .crtc_goe = 0x80100110, + .crtc_ps1_active = 0x41060010, + .pll_freq = 75, + .fast_pll_freq = 100, + .sysclk_src = CLK_SRC_PLL, + .sysclk_divider = 0, + .pixclk_src = CLK_SRC_PLL, + .pixclk_divider = 2, + .pixclk_divider_rotated = 6, +},{ + .xres = 240, + .yres = 320, + .left_margin = 0x27, + .right_margin = 0x2e, + .upper_margin = 0x01, + .lower_margin = 0x00, + .crtc_ss = 0x81170027, + .crtc_ls = 0xA0140000, + .crtc_gs = 0xC0140014, + .crtc_vpos_gs = 0x00010141, + .crtc_rev = 0x00400008, + .crtc_dclk = 0xA0000000, + .crtc_gclk = 0x8015010F, + .crtc_goe = 0x80100110, + .crtc_ps1_active = 0x41060010, + .pll_freq = 0, + .fast_pll_freq = 0, + .sysclk_src = CLK_SRC_XTAL, + .sysclk_divider = 0, + .pixclk_src = CLK_SRC_XTAL, + .pixclk_divider = 1, + .pixclk_divider_rotated = 1, +}, + +}; + +static struct w100fb_mach_info corgi_fb_info = { + .tg = &corgi_lcdtg_info, + .init_mode = INIT_MODE_ROTATED, + .mem = &corgi_fb_mem, + .regs = &corgi_fb_regs, + .modelist = &corgi_fb_modes[0], + .num_modes = 2, + .gpio = &corgi_fb_gpio, + .xtal_freq = 12500000, + .xtal_dbl = 0, +}; + +static struct resource corgi_fb_resources[] = { + [0] = { + .start = 0x08000000, + .end = 0x08ffffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device corgifb_device = { + .name = "w100fb", + .id = -1, + .num_resources = ARRAY_SIZE(corgi_fb_resources), + .resource = corgi_fb_resources, + .dev = { + .platform_data = &corgi_fb_info, + .parent = &corgissp_device.dev, + }, + +}; + + +/* * Corgi Backlight Device */ static void corgi_bl_kick_battery(void) @@ -154,6 +285,21 @@ static void corgi_bl_kick_battery(void) } } +static void corgi_bl_set_intensity(int intensity) +{ + if (intensity > 0x10) + intensity += 0x10; + + /* Bits 0-4 are accessed via the SSP interface */ + corgi_ssp_blduty_set(intensity & 0x1f); + + /* Bit 5 is via SCOOP */ + if (intensity & 0x0020) + set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); + else + reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); +} + static struct generic_bl_info corgi_bl_machinfo = { .name = "corgi-bl", .max_intensity = 0x2f, @@ -190,9 +336,40 @@ static struct platform_device corgiled_device = { .id = -1, }; + /* * Corgi Touch Screen Device */ +static unsigned long (*get_hsync_invperiod)(struct device *dev); + +static void inline sharpsl_wait_sync(int gpio) +{ + while((GPLR(gpio) & GPIO_bit(gpio)) == 0); + while((GPLR(gpio) & GPIO_bit(gpio)) != 0); +} + +static unsigned long corgi_get_hsync_invperiod(void) +{ + if (!get_hsync_invperiod) + get_hsync_invperiod = symbol_get(w100fb_get_hsynclen); + if (!get_hsync_invperiod) + return 0; + + return get_hsync_invperiod(&corgifb_device.dev); +} + +static void corgi_put_hsync(void) +{ + if (get_hsync_invperiod) + symbol_put(w100fb_get_hsynclen); + get_hsync_invperiod = NULL; +} + +static void corgi_wait_hsync(void) +{ + sharpsl_wait_sync(CORGI_GPIO_HSYNC); +} + static struct resource corgits_resources[] = { [0] = { .start = CORGI_IRQ_GPIO_TP_INT, @@ -202,9 +379,9 @@ static struct resource corgits_resources[] = { }; static struct corgits_machinfo corgi_ts_machinfo = { - .get_hsync_len = corgi_get_hsync_len, - .put_hsync = corgi_put_hsync, - .wait_hsync = corgi_wait_hsync, + .get_hsync_invperiod = corgi_get_hsync_invperiod, + .put_hsync = corgi_put_hsync, + .wait_hsync = corgi_wait_hsync, }; static struct platform_device corgits_device = { @@ -242,12 +419,10 @@ static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, vo err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC card detect", data); - if (err) { + if (err) printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - return -1; - } - return 0; + return err; } static void corgi_mci_setpower(struct device *dev, unsigned int vdd) diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 365b9435f748..9328df37afd1 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -173,7 +173,7 @@ static void lcdtg_set_phadadj(int mode) static int lcd_inited; -static void lcdtg_hw_init(int mode) +void corgi_lcdtg_hw_init(int mode) { if (!lcd_inited) { int comadj; @@ -254,7 +254,7 @@ static void lcdtg_hw_init(int mode) } } -static void lcdtg_suspend(void) +void corgi_lcdtg_suspend(void) { /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ mdelay(34); @@ -288,298 +288,3 @@ static void lcdtg_suspend(void) lcd_inited = 0; } - -/* - * Corgi w100 Frame Buffer Device - */ -#ifdef CONFIG_PXA_SHARP_C7xx - -#include <video/w100fb.h> - -static void w100_lcdtg_suspend(struct w100fb_par *par) -{ - lcdtg_suspend(); -} - -static void w100_lcdtg_init(struct w100fb_par *par) -{ - lcdtg_hw_init(par->xres); -} - - -static struct w100_tg_info corgi_lcdtg_info = { - .change = w100_lcdtg_init, - .suspend = w100_lcdtg_suspend, - .resume = w100_lcdtg_init, -}; - -static struct w100_mem_info corgi_fb_mem = { - .ext_cntl = 0x00040003, - .sdram_mode_reg = 0x00650021, - .ext_timing_cntl = 0x10002a4a, - .io_cntl = 0x7ff87012, - .size = 0x1fffff, -}; - -static struct w100_gen_regs corgi_fb_regs = { - .lcd_format = 0x00000003, - .lcdd_cntl1 = 0x01CC0000, - .lcdd_cntl2 = 0x0003FFFF, - .genlcd_cntl1 = 0x00FFFF0D, - .genlcd_cntl2 = 0x003F3003, - .genlcd_cntl3 = 0x000102aa, -}; - -static struct w100_gpio_regs corgi_fb_gpio = { - .init_data1 = 0x000000bf, - .init_data2 = 0x00000000, - .gpio_dir1 = 0x00000000, - .gpio_oe1 = 0x03c0feff, - .gpio_dir2 = 0x00000000, - .gpio_oe2 = 0x00000000, -}; - -static struct w100_mode corgi_fb_modes[] = { -{ - .xres = 480, - .yres = 640, - .left_margin = 0x56, - .right_margin = 0x55, - .upper_margin = 0x03, - .lower_margin = 0x00, - .crtc_ss = 0x82360056, - .crtc_ls = 0xA0280000, - .crtc_gs = 0x80280028, - .crtc_vpos_gs = 0x02830002, - .crtc_rev = 0x00400008, - .crtc_dclk = 0xA0000000, - .crtc_gclk = 0x8015010F, - .crtc_goe = 0x80100110, - .crtc_ps1_active = 0x41060010, - .pll_freq = 75, - .fast_pll_freq = 100, - .sysclk_src = CLK_SRC_PLL, - .sysclk_divider = 0, - .pixclk_src = CLK_SRC_PLL, - .pixclk_divider = 2, - .pixclk_divider_rotated = 6, -},{ - .xres = 240, - .yres = 320, - .left_margin = 0x27, - .right_margin = 0x2e, - .upper_margin = 0x01, - .lower_margin = 0x00, - .crtc_ss = 0x81170027, - .crtc_ls = 0xA0140000, - .crtc_gs = 0xC0140014, - .crtc_vpos_gs = 0x00010141, - .crtc_rev = 0x00400008, - .crtc_dclk = 0xA0000000, - .crtc_gclk = 0x8015010F, - .crtc_goe = 0x80100110, - .crtc_ps1_active = 0x41060010, - .pll_freq = 0, - .fast_pll_freq = 0, - .sysclk_src = CLK_SRC_XTAL, - .sysclk_divider = 0, - .pixclk_src = CLK_SRC_XTAL, - .pixclk_divider = 1, - .pixclk_divider_rotated = 1, -}, - -}; - -static struct w100fb_mach_info corgi_fb_info = { - .tg = &corgi_lcdtg_info, - .init_mode = INIT_MODE_ROTATED, - .mem = &corgi_fb_mem, - .regs = &corgi_fb_regs, - .modelist = &corgi_fb_modes[0], - .num_modes = 2, - .gpio = &corgi_fb_gpio, - .xtal_freq = 12500000, - .xtal_dbl = 0, -}; - -static struct resource corgi_fb_resources[] = { - [0] = { - .start = 0x08000000, - .end = 0x08ffffff, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device corgifb_device = { - .name = "w100fb", - .id = -1, - .num_resources = ARRAY_SIZE(corgi_fb_resources), - .resource = corgi_fb_resources, - .dev = { - .platform_data = &corgi_fb_info, - .parent = &corgissp_device.dev, - }, - -}; -#endif - - -/* - * Spitz PXA Frame Buffer Device - */ -#ifdef CONFIG_PXA_SHARP_Cxx00 - -#include <asm/arch/pxafb.h> - -void spitz_lcd_power(int on, struct fb_var_screeninfo *var) -{ - if (on) - lcdtg_hw_init(var->xres); - else - lcdtg_suspend(); -} - -#endif - - -/* - * Corgi/Spitz Touchscreen to LCD interface - */ -static unsigned long (*get_hsync_time)(struct device *dev); - -static void inline sharpsl_wait_sync(int gpio) -{ - while((GPLR(gpio) & GPIO_bit(gpio)) == 0); - while((GPLR(gpio) & GPIO_bit(gpio)) != 0); -} - -#ifdef CONFIG_PXA_SHARP_C7xx -unsigned long corgi_get_hsync_len(void) -{ - if (!get_hsync_time) - get_hsync_time = symbol_get(w100fb_get_hsynclen); - if (!get_hsync_time) - return 0; - - return get_hsync_time(&corgifb_device.dev); -} - -void corgi_put_hsync(void) -{ - if (get_hsync_time) - symbol_put(w100fb_get_hsynclen); - get_hsync_time = NULL; -} - -void corgi_wait_hsync(void) -{ - sharpsl_wait_sync(CORGI_GPIO_HSYNC); -} -#endif - -#ifdef CONFIG_PXA_SHARP_Cxx00 -static struct device *spitz_pxafb_dev; - -static int is_pxafb_device(struct device * dev, void * data) -{ - struct platform_device *pdev = container_of(dev, struct platform_device, dev); - - return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0); -} - -unsigned long spitz_get_hsync_len(void) -{ -#ifdef CONFIG_FB_PXA - if (!spitz_pxafb_dev) { - spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); - if (!spitz_pxafb_dev) - return 0; - } - if (!get_hsync_time) - get_hsync_time = symbol_get(pxafb_get_hsync_time); - if (!get_hsync_time) -#endif - return 0; - - return pxafb_get_hsync_time(spitz_pxafb_dev); -} - -void spitz_put_hsync(void) -{ - put_device(spitz_pxafb_dev); - if (get_hsync_time) - symbol_put(pxafb_get_hsync_time); - spitz_pxafb_dev = NULL; - get_hsync_time = NULL; -} - -void spitz_wait_hsync(void) -{ - sharpsl_wait_sync(SPITZ_GPIO_HSYNC); -} -#endif - -/* - * Corgi/Spitz Backlight Power - */ -#ifdef CONFIG_PXA_SHARP_C7xx -void corgi_bl_set_intensity(int intensity) -{ - if (intensity > 0x10) - intensity += 0x10; - - /* Bits 0-4 are accessed via the SSP interface */ - corgi_ssp_blduty_set(intensity & 0x1f); - - /* Bit 5 is via SCOOP */ - if (intensity & 0x0020) - set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); - else - reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT); -} -#endif - - -#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) -void spitz_bl_set_intensity(int intensity) -{ - if (intensity > 0x10) - intensity += 0x10; - - /* Bits 0-4 are accessed via the SSP interface */ - corgi_ssp_blduty_set(intensity & 0x1f); - - /* Bit 5 is via SCOOP */ - if (intensity & 0x0020) - reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); - else - set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); - - if (intensity) - set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); - else - reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); -} -#endif - -#ifdef CONFIG_MACH_AKITA -void akita_bl_set_intensity(int intensity) -{ - if (intensity > 0x10) - intensity += 0x10; - - /* Bits 0-4 are accessed via the SSP interface */ - corgi_ssp_blduty_set(intensity & 0x1f); - - /* Bit 5 is via IO-Expander */ - if (intensity & 0x0020) - akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); - else - akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); - - if (intensity) - akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); - else - akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); -} -#endif diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 40dea3d5142b..efba65edcd51 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -21,6 +21,7 @@ #include <asm/arch/ssp.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/regs-ssp.h> #include "sharpsl.h" static DEFINE_SPINLOCK(corgi_ssp_lock); diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c new file mode 100644 index 000000000000..cbc583beedc8 --- /dev/null +++ b/arch/arm/mach-pxa/cpu-pxa.c @@ -0,0 +1,294 @@ +/* + * linux/arch/arm/mach-pxa/cpu-pxa.c + * + * Copyright (C) 2002,2003 Intrinsyc Software + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * History: + * 31-Jul-2002 : Initial version [FB] + * 29-Jan-2003 : added PXA255 support [FB] + * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.) + * + * Note: + * This driver may change the memory bus clock rate, but will not do any + * platform specific access timing changes... for example if you have flash + * memory connected to CS0, you will need to register a platform specific + * notifier which will adjust the memory access strobes to maintain a + * minimum strobe width. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/cpufreq.h> + +#include <asm/hardware.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> + +#ifdef DEBUG +static unsigned int freq_debug; +MODULE_PARM(freq_debug, "i"); +MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0"); +#else +#define freq_debug 0 +#endif + +typedef struct { + unsigned int khz; + unsigned int membus; + unsigned int cccr; + unsigned int div2; +} pxa_freqs_t; + +/* Define the refresh period in mSec for the SDRAM and the number of rows */ +#define SDRAM_TREF 64 /* standard 64ms SDRAM */ +#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */ +#define MDREFR_DRI(x) (((x) * SDRAM_TREF) / (SDRAM_ROWS * 32)) + +#define CCLKCFG_TURBO 0x1 +#define CCLKCFG_FCS 0x2 +#define PXA25x_MIN_FREQ 99500 +#define PXA25x_MAX_FREQ 398100 +#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2) +#define MDREFR_DRI_MASK 0xFFF + + +/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */ +static pxa_freqs_t pxa255_run_freqs[] = +{ + /* CPU MEMBUS CCCR DIV2*/ + { 99500, 99500, 0x121, 1}, /* run= 99, turbo= 99, PXbus=50, SDRAM=50 */ + {132700, 132700, 0x123, 1}, /* run=133, turbo=133, PXbus=66, SDRAM=66 */ + {199100, 99500, 0x141, 0}, /* run=199, turbo=199, PXbus=99, SDRAM=99 */ + {265400, 132700, 0x143, 1}, /* run=265, turbo=265, PXbus=133, SDRAM=66 */ + {331800, 165900, 0x145, 1}, /* run=331, turbo=331, PXbus=166, SDRAM=83 */ + {398100, 99500, 0x161, 0}, /* run=398, turbo=398, PXbus=196, SDRAM=99 */ + {0,} +}; +#define NUM_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs) + +static struct cpufreq_frequency_table pxa255_run_freq_table[NUM_RUN_FREQS+1]; + +/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */ +static pxa_freqs_t pxa255_turbo_freqs[] = +{ + /* CPU MEMBUS CCCR DIV2*/ + { 99500, 99500, 0x121, 1}, /* run=99, turbo= 99, PXbus=50, SDRAM=50 */ + {199100, 99500, 0x221, 0}, /* run=99, turbo=199, PXbus=50, SDRAM=99 */ + {298500, 99500, 0x321, 0}, /* run=99, turbo=287, PXbus=50, SDRAM=99 */ + {298600, 99500, 0x1c1, 0}, /* run=199, turbo=287, PXbus=99, SDRAM=99 */ + {398100, 99500, 0x241, 0}, /* run=199, turbo=398, PXbus=99, SDRAM=99 */ + {0,} +}; +#define NUM_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs) + +static struct cpufreq_frequency_table pxa255_turbo_freq_table[NUM_TURBO_FREQS+1]; + +extern unsigned get_clk_frequency_khz(int info); + +/* find a valid frequency point */ +static int pxa_verify_policy(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *pxa_freqs_table; + int ret; + + if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) { + pxa_freqs_table = pxa255_run_freq_table; + } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) { + pxa_freqs_table = pxa255_turbo_freq_table; + } else { + printk("CPU PXA: Unknown policy found. " + "Using CPUFREQ_POLICY_PERFORMANCE\n"); + pxa_freqs_table = pxa255_run_freq_table; + } + + ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table); + + if (freq_debug) + pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n", + policy->min, policy->max); + + return ret; +} + +static int pxa_set_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_frequency_table *pxa_freqs_table; + pxa_freqs_t *pxa_freq_settings; + struct cpufreq_freqs freqs; + int idx; + unsigned long flags; + unsigned int unused, preset_mdrefr, postset_mdrefr; + void *ramstart = phys_to_virt(0xa0000000); + + /* Get the current policy */ + if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) { + pxa_freq_settings = pxa255_run_freqs; + pxa_freqs_table = pxa255_run_freq_table; + } else if (policy->policy == CPUFREQ_POLICY_POWERSAVE) { + pxa_freq_settings = pxa255_turbo_freqs; + pxa_freqs_table = pxa255_turbo_freq_table; + } else { + printk("CPU PXA: Unknown policy found. " + "Using CPUFREQ_POLICY_PERFORMANCE\n"); + pxa_freq_settings = pxa255_run_freqs; + pxa_freqs_table = pxa255_run_freq_table; + } + + /* Lookup the next frequency */ + if (cpufreq_frequency_table_target(policy, pxa_freqs_table, + target_freq, relation, &idx)) { + return -EINVAL; + } + + freqs.old = policy->cur; + freqs.new = pxa_freq_settings[idx].khz; + freqs.cpu = policy->cpu; + + if (freq_debug) + pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n", + freqs.new / 1000, (pxa_freq_settings[idx].div2) ? + (pxa_freq_settings[idx].membus / 2000) : + (pxa_freq_settings[idx].membus / 1000)); + + /* + * Tell everyone what we're about to do... + * you should add a notify client with any platform specific + * Vcc changing capability + */ + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* Calculate the next MDREFR. If we're slowing down the SDRAM clock + * we need to preset the smaller DRI before the change. If we're speeding + * up we need to set the larger DRI value after the change. + */ + preset_mdrefr = postset_mdrefr = MDREFR; + if ((MDREFR & MDREFR_DRI_MASK) > MDREFR_DRI(pxa_freq_settings[idx].membus)) { + preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK) | + MDREFR_DRI(pxa_freq_settings[idx].membus); + } + postset_mdrefr = (postset_mdrefr & ~MDREFR_DRI_MASK) | + MDREFR_DRI(pxa_freq_settings[idx].membus); + + /* If we're dividing the memory clock by two for the SDRAM clock, this + * must be set prior to the change. Clearing the divide must be done + * after the change. + */ + if (pxa_freq_settings[idx].div2) { + preset_mdrefr |= MDREFR_DB2_MASK; + postset_mdrefr |= MDREFR_DB2_MASK; + } else { + postset_mdrefr &= ~MDREFR_DB2_MASK; + } + + local_irq_save(flags); + + /* Set new the CCCR */ + CCCR = pxa_freq_settings[idx].cccr; + + asm volatile(" \n\ + ldr r4, [%1] /* load MDREFR */ \n\ + b 2f \n\ + .align 5 \n\ +1: \n\ + str %4, [%1] /* preset the MDREFR */ \n\ + mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\ + str %5, [%1] /* postset the MDREFR */ \n\ + \n\ + b 3f \n\ +2: b 1b \n\ +3: nop \n\ + " + : "=&r" (unused) + : "r" (&MDREFR), "r" (CCLKCFG_TURBO|CCLKCFG_FCS), "r" (ramstart), + "r" (preset_mdrefr), "r" (postset_mdrefr) + : "r4", "r5"); + local_irq_restore(flags); + + /* + * Tell everyone what we've just done... + * you should add a notify client with any platform specific + * SDRAM refresh timer adjustments + */ + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +static int pxa_cpufreq_init(struct cpufreq_policy *policy) +{ + int i; + + /* set default policy and cpuinfo */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->policy = CPUFREQ_POLICY_PERFORMANCE; + policy->cpuinfo.max_freq = PXA25x_MAX_FREQ; + policy->cpuinfo.min_freq = PXA25x_MIN_FREQ; + policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ + policy->cur = get_clk_frequency_khz(0); /* current freq */ + policy->min = policy->max = policy->cur; + + /* Generate the run cpufreq_frequency_table struct */ + for (i = 0; i < NUM_RUN_FREQS; i++) { + pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; + pxa255_run_freq_table[i].index = i; + } + + pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; + /* Generate the turbo cpufreq_frequency_table struct */ + for (i = 0; i < NUM_TURBO_FREQS; i++) { + pxa255_turbo_freq_table[i].frequency = pxa255_turbo_freqs[i].khz; + pxa255_turbo_freq_table[i].index = i; + } + pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; + + printk(KERN_INFO "PXA CPU frequency change support initialized\n"); + + return 0; +} + +static struct cpufreq_driver pxa_cpufreq_driver = { + .verify = pxa_verify_policy, + .target = pxa_set_target, + .init = pxa_cpufreq_init, + .name = "PXA25x", +}; + +static int __init pxa_cpu_init(void) +{ + int ret = -ENODEV; + if (cpu_is_pxa25x()) + ret = cpufreq_register_driver(&pxa_cpufreq_driver); + return ret; +} + +static void __exit pxa_cpu_exit(void) +{ + if (cpu_is_pxa25x()) + cpufreq_unregister_driver(&pxa_cpufreq_driver); +} + + +MODULE_AUTHOR ("Intrinsyc Software Inc."); +MODULE_DESCRIPTION ("CPU frequency changing driver for the PXA architecture"); +MODULE_LICENSE("GPL"); +module_init(pxa_cpu_init); +module_exit(pxa_cpu_exit); diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c new file mode 100644 index 000000000000..50ff453ad370 --- /dev/null +++ b/arch/arm/mach-pxa/devices.c @@ -0,0 +1,662 @@ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/udc.h> +#include <asm/arch/pxafb.h> +#include <asm/arch/mmc.h> +#include <asm/arch/irda.h> +#include <asm/arch/i2c.h> + +#include "devices.h" + +void __init pxa_register_device(struct platform_device *dev, void *data) +{ + int ret; + + dev->dev.platform_data = data; + + ret = platform_device_register(dev); + if (ret) + dev_err(&dev->dev, "unable to register device: %d\n", ret); +} + +static struct resource pxamci_resources[] = { + [0] = { + .start = 0x41100000, + .end = 0x41100fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MMC, + .end = IRQ_MMC, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 21, + .end = 21, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = 22, + .end = 22, + .flags = IORESOURCE_DMA, + }, +}; + +static u64 pxamci_dmamask = 0xffffffffUL; + +struct platform_device pxa_device_mci = { + .name = "pxa2xx-mci", + .id = 0, + .dev = { + .dma_mask = &pxamci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pxamci_resources), + .resource = pxamci_resources, +}; + +void __init pxa_set_mci_info(struct pxamci_platform_data *info) +{ + pxa_register_device(&pxa_device_mci, info); +} + + +static struct pxa2xx_udc_mach_info pxa_udc_info; + +void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info) +{ + memcpy(&pxa_udc_info, info, sizeof *info); +} + +static struct resource pxa2xx_udc_resources[] = { + [0] = { + .start = 0x40600000, + .end = 0x4060ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USB, + .end = IRQ_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 udc_dma_mask = ~(u32)0; + +struct platform_device pxa_device_udc = { + .name = "pxa2xx-udc", + .id = -1, + .resource = pxa2xx_udc_resources, + .num_resources = ARRAY_SIZE(pxa2xx_udc_resources), + .dev = { + .platform_data = &pxa_udc_info, + .dma_mask = &udc_dma_mask, + } +}; + +static struct resource pxafb_resources[] = { + [0] = { + .start = 0x44000000, + .end = 0x4400ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_LCD, + .end = IRQ_LCD, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 fb_dma_mask = ~(u64)0; + +struct platform_device pxa_device_fb = { + .name = "pxa2xx-fb", + .id = -1, + .dev = { + .dma_mask = &fb_dma_mask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pxafb_resources), + .resource = pxafb_resources, +}; + +void __init set_pxa_fb_info(struct pxafb_mach_info *info) +{ + pxa_register_device(&pxa_device_fb, info); +} + +void __init set_pxa_fb_parent(struct device *parent_dev) +{ + pxa_device_fb.dev.parent = parent_dev; +} + +static struct resource pxa_resource_ffuart[] = { + { + .start = __PREG(FFUART), + .end = __PREG(FFUART) + 35, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_FFUART, + .end = IRQ_FFUART, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device pxa_device_ffuart= { + .name = "pxa2xx-uart", + .id = 0, + .resource = pxa_resource_ffuart, + .num_resources = ARRAY_SIZE(pxa_resource_ffuart), +}; + +static struct resource pxa_resource_btuart[] = { + { + .start = __PREG(BTUART), + .end = __PREG(BTUART) + 35, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_BTUART, + .end = IRQ_BTUART, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device pxa_device_btuart = { + .name = "pxa2xx-uart", + .id = 1, + .resource = pxa_resource_btuart, + .num_resources = ARRAY_SIZE(pxa_resource_btuart), +}; + +static struct resource pxa_resource_stuart[] = { + { + .start = __PREG(STUART), + .end = __PREG(STUART) + 35, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_STUART, + .end = IRQ_STUART, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device pxa_device_stuart = { + .name = "pxa2xx-uart", + .id = 2, + .resource = pxa_resource_stuart, + .num_resources = ARRAY_SIZE(pxa_resource_stuart), +}; + +static struct resource pxa_resource_hwuart[] = { + { + .start = __PREG(HWUART), + .end = __PREG(HWUART) + 47, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_HWUART, + .end = IRQ_HWUART, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device pxa_device_hwuart = { + .name = "pxa2xx-uart", + .id = 3, + .resource = pxa_resource_hwuart, + .num_resources = ARRAY_SIZE(pxa_resource_hwuart), +}; + +static struct resource pxai2c_resources[] = { + { + .start = 0x40301680, + .end = 0x403016a3, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_I2C, + .end = IRQ_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa_device_i2c = { + .name = "pxa2xx-i2c", + .id = 0, + .resource = pxai2c_resources, + .num_resources = ARRAY_SIZE(pxai2c_resources), +}; + +void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info) +{ + pxa_register_device(&pxa_device_i2c, info); +} + +static struct resource pxai2s_resources[] = { + { + .start = 0x40400000, + .end = 0x40400083, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_I2S, + .end = IRQ_I2S, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa_device_i2s = { + .name = "pxa2xx-i2s", + .id = -1, + .resource = pxai2s_resources, + .num_resources = ARRAY_SIZE(pxai2s_resources), +}; + +static u64 pxaficp_dmamask = ~(u32)0; + +struct platform_device pxa_device_ficp = { + .name = "pxa2xx-ir", + .id = -1, + .dev = { + .dma_mask = &pxaficp_dmamask, + .coherent_dma_mask = 0xffffffff, + }, +}; + +void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) +{ + pxa_register_device(&pxa_device_ficp, info); +} + +struct platform_device pxa_device_rtc = { + .name = "sa1100-rtc", + .id = -1, +}; + +#ifdef CONFIG_PXA25x + +static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa25x_resource_ssp[] = { + [0] = { + .start = 0x41000000, + .end = 0x4100001f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SSP, + .end = IRQ_SSP, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 13, + .end = 13, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 14, + .end = 14, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa25x_device_ssp = { + .name = "pxa25x-ssp", + .id = 0, + .dev = { + .dma_mask = &pxa25x_ssp_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa25x_resource_ssp, + .num_resources = ARRAY_SIZE(pxa25x_resource_ssp), +}; + +static u64 pxa25x_nssp_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa25x_resource_nssp[] = { + [0] = { + .start = 0x41400000, + .end = 0x4140002f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_NSSP, + .end = IRQ_NSSP, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 15, + .end = 15, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 16, + .end = 16, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa25x_device_nssp = { + .name = "pxa25x-nssp", + .id = 1, + .dev = { + .dma_mask = &pxa25x_nssp_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa25x_resource_nssp, + .num_resources = ARRAY_SIZE(pxa25x_resource_nssp), +}; + +static u64 pxa25x_assp_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa25x_resource_assp[] = { + [0] = { + .start = 0x41500000, + .end = 0x4150002f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_ASSP, + .end = IRQ_ASSP, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 23, + .end = 23, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 24, + .end = 24, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa25x_device_assp = { + /* ASSP is basically equivalent to NSSP */ + .name = "pxa25x-nssp", + .id = 2, + .dev = { + .dma_mask = &pxa25x_assp_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa25x_resource_assp, + .num_resources = ARRAY_SIZE(pxa25x_resource_assp), +}; +#endif /* CONFIG_PXA25x */ + +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) + +static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa27x_resource_ohci[] = { + [0] = { + .start = 0x4C000000, + .end = 0x4C00ff6f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_USBH1, + .end = IRQ_USBH1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa27x_device_ohci = { + .name = "pxa27x-ohci", + .id = -1, + .dev = { + .dma_mask = &pxa27x_ohci_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(pxa27x_resource_ohci), + .resource = pxa27x_resource_ohci, +}; + +void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) +{ + pxa_register_device(&pxa27x_device_ohci, info); +} + +static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa27x_resource_ssp1[] = { + [0] = { + .start = 0x41000000, + .end = 0x4100003f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SSP, + .end = IRQ_SSP, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 13, + .end = 13, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 14, + .end = 14, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa27x_device_ssp1 = { + .name = "pxa27x-ssp", + .id = 0, + .dev = { + .dma_mask = &pxa27x_ssp1_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa27x_resource_ssp1, + .num_resources = ARRAY_SIZE(pxa27x_resource_ssp1), +}; + +static u64 pxa27x_ssp2_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa27x_resource_ssp2[] = { + [0] = { + .start = 0x41700000, + .end = 0x4170003f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SSP2, + .end = IRQ_SSP2, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 15, + .end = 15, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 16, + .end = 16, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa27x_device_ssp2 = { + .name = "pxa27x-ssp", + .id = 1, + .dev = { + .dma_mask = &pxa27x_ssp2_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa27x_resource_ssp2, + .num_resources = ARRAY_SIZE(pxa27x_resource_ssp2), +}; + +static u64 pxa27x_ssp3_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa27x_resource_ssp3[] = { + [0] = { + .start = 0x41900000, + .end = 0x4190003f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SSP3, + .end = IRQ_SSP3, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 66, + .end = 66, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 67, + .end = 67, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa27x_device_ssp3 = { + .name = "pxa27x-ssp", + .id = 2, + .dev = { + .dma_mask = &pxa27x_ssp3_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa27x_resource_ssp3, + .num_resources = ARRAY_SIZE(pxa27x_resource_ssp3), +}; +#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ + +#ifdef CONFIG_PXA3xx +static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32); + +static struct resource pxa3xx_resource_ssp4[] = { + [0] = { + .start = 0x41a00000, + .end = 0x41a0003f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SSP4, + .end = IRQ_SSP4, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* DRCMR for RX */ + .start = 2, + .end = 2, + .flags = IORESOURCE_DMA, + }, + [3] = { + /* DRCMR for TX */ + .start = 3, + .end = 3, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa3xx_device_ssp4 = { + /* PXA3xx SSP is basically equivalent to PXA27x */ + .name = "pxa27x-ssp", + .id = 3, + .dev = { + .dma_mask = &pxa3xx_ssp4_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = pxa3xx_resource_ssp4, + .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4), +}; + +static struct resource pxa3xx_resources_mci2[] = { + [0] = { + .start = 0x42000000, + .end = 0x42000fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MMC2, + .end = IRQ_MMC2, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 93, + .end = 93, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = 94, + .end = 94, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa3xx_device_mci2 = { + .name = "pxa2xx-mci", + .id = 1, + .dev = { + .dma_mask = &pxamci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pxa3xx_resources_mci2), + .resource = pxa3xx_resources_mci2, +}; + +void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info) +{ + pxa_register_device(&pxa3xx_device_mci2, info); +} + +static struct resource pxa3xx_resources_mci3[] = { + [0] = { + .start = 0x42500000, + .end = 0x42500fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MMC3, + .end = IRQ_MMC3, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 100, + .end = 100, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = 101, + .end = 101, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device pxa3xx_device_mci3 = { + .name = "pxa2xx-mci", + .id = 2, + .dev = { + .dma_mask = &pxamci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pxa3xx_resources_mci3), + .resource = pxa3xx_resources_mci3, +}; + +void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info) +{ + pxa_register_device(&pxa3xx_device_mci3, info); +} + +#endif /* CONFIG_PXA3xx */ diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 94c8d5cdd60a..96c7c8909068 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -1,4 +1,6 @@ extern struct platform_device pxa_device_mci; +extern struct platform_device pxa3xx_device_mci2; +extern struct platform_device pxa3xx_device_mci3; extern struct platform_device pxa_device_udc; extern struct platform_device pxa_device_fb; extern struct platform_device pxa_device_ffuart; @@ -12,3 +14,13 @@ extern struct platform_device pxa_device_rtc; extern struct platform_device pxa27x_device_i2c_power; extern struct platform_device pxa27x_device_ohci; + +extern struct platform_device pxa25x_device_ssp; +extern struct platform_device pxa25x_device_nssp; +extern struct platform_device pxa25x_device_assp; +extern struct platform_device pxa27x_device_ssp1; +extern struct platform_device pxa27x_device_ssp2; +extern struct platform_device pxa27x_device_ssp3; +extern struct platform_device pxa3xx_device_ssp4; + +void __init pxa_register_device(struct platform_device *dev, void *data); diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c new file mode 100644 index 000000000000..ee0ae93c876a --- /dev/null +++ b/arch/arm/mach-pxa/eseries.c @@ -0,0 +1,101 @@ +/* + * Hardware definitions for the Toshiba eseries PDAs + * + * Copyright (c) 2003 Ian Molton <spyro@f2s.com> + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ + +#include <linux/init.h> + +#include <asm/setup.h> +#include <asm/mach/arch.h> +#include <asm/arch/hardware.h> +#include <asm/mach-types.h> + +#include <generic.h> + +/* Only e800 has 128MB RAM */ +static void __init eseries_fixup(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi) +{ + mi->nr_banks=1; + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + if (machine_is_e800()) + mi->bank[0].size = (128*1024*1024); + else + mi->bank[0].size = (64*1024*1024); +} + +/* e-series machine definitions */ + +#ifdef CONFIG_MACH_E330 +MACHINE_START(E330, "Toshiba e330") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_E740 +MACHINE_START(E740, "Toshiba e740") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_E750 +MACHINE_START(E750, "Toshiba e750") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_E400 +MACHINE_START(E400, "Toshiba e400") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .timer = &pxa_timer, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_E800 +MACHINE_START(E800, "Toshiba e800") + /* Maintainer: Ian Molton (spyro@f2s.com) */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .fixup = eseries_fixup, + .timer = &pxa_timer, +MACHINE_END +#endif + diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 1c34946ee16e..698aeec52961 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -20,7 +20,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/platform_device.h> #include <linux/ioport.h> #include <linux/pm.h> #include <linux/string.h> @@ -33,13 +32,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/gpio.h> -#include <asm/arch/udc.h> -#include <asm/arch/pxafb.h> -#include <asm/arch/mmc.h> -#include <asm/arch/irda.h> -#include <asm/arch/i2c.h> -#include "devices.h" #include "generic.h" /* @@ -203,7 +196,7 @@ static struct map_desc standard_io_desc[] __initdata = { }, { /* Mem Ctl */ .virtual = 0xf6000000, .pfn = __phys_to_pfn(0x48000000), - .length = 0x00100000, + .length = 0x00200000, .type = MT_DEVICE }, { /* USB host */ .virtual = 0xf8000000, @@ -233,245 +226,3 @@ void __init pxa_map_io(void) iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); get_clk_frequency_khz(1); } - - -static struct resource pxamci_resources[] = { - [0] = { - .start = 0x41100000, - .end = 0x41100fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_MMC, - .end = IRQ_MMC, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 pxamci_dmamask = 0xffffffffUL; - -struct platform_device pxa_device_mci = { - .name = "pxa2xx-mci", - .id = -1, - .dev = { - .dma_mask = &pxamci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(pxamci_resources), - .resource = pxamci_resources, -}; - -void __init pxa_set_mci_info(struct pxamci_platform_data *info) -{ - pxa_device_mci.dev.platform_data = info; -} - - -static struct pxa2xx_udc_mach_info pxa_udc_info; - -void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info) -{ - memcpy(&pxa_udc_info, info, sizeof *info); -} - -static struct resource pxa2xx_udc_resources[] = { - [0] = { - .start = 0x40600000, - .end = 0x4060ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USB, - .end = IRQ_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 udc_dma_mask = ~(u32)0; - -struct platform_device pxa_device_udc = { - .name = "pxa2xx-udc", - .id = -1, - .resource = pxa2xx_udc_resources, - .num_resources = ARRAY_SIZE(pxa2xx_udc_resources), - .dev = { - .platform_data = &pxa_udc_info, - .dma_mask = &udc_dma_mask, - } -}; - -static struct resource pxafb_resources[] = { - [0] = { - .start = 0x44000000, - .end = 0x4400ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_LCD, - .end = IRQ_LCD, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 fb_dma_mask = ~(u64)0; - -struct platform_device pxa_device_fb = { - .name = "pxa2xx-fb", - .id = -1, - .dev = { - .dma_mask = &fb_dma_mask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(pxafb_resources), - .resource = pxafb_resources, -}; - -void __init set_pxa_fb_info(struct pxafb_mach_info *info) -{ - pxa_device_fb.dev.platform_data = info; -} - -void __init set_pxa_fb_parent(struct device *parent_dev) -{ - pxa_device_fb.dev.parent = parent_dev; -} - -static struct resource pxa_resource_ffuart[] = { - { - .start = __PREG(FFUART), - .end = __PREG(FFUART) + 35, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_FFUART, - .end = IRQ_FFUART, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device pxa_device_ffuart= { - .name = "pxa2xx-uart", - .id = 0, - .resource = pxa_resource_ffuart, - .num_resources = ARRAY_SIZE(pxa_resource_ffuart), -}; - -static struct resource pxa_resource_btuart[] = { - { - .start = __PREG(BTUART), - .end = __PREG(BTUART) + 35, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_BTUART, - .end = IRQ_BTUART, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device pxa_device_btuart = { - .name = "pxa2xx-uart", - .id = 1, - .resource = pxa_resource_btuart, - .num_resources = ARRAY_SIZE(pxa_resource_btuart), -}; - -static struct resource pxa_resource_stuart[] = { - { - .start = __PREG(STUART), - .end = __PREG(STUART) + 35, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_STUART, - .end = IRQ_STUART, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device pxa_device_stuart = { - .name = "pxa2xx-uart", - .id = 2, - .resource = pxa_resource_stuart, - .num_resources = ARRAY_SIZE(pxa_resource_stuart), -}; - -static struct resource pxa_resource_hwuart[] = { - { - .start = __PREG(HWUART), - .end = __PREG(HWUART) + 47, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_HWUART, - .end = IRQ_HWUART, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device pxa_device_hwuart = { - .name = "pxa2xx-uart", - .id = 3, - .resource = pxa_resource_hwuart, - .num_resources = ARRAY_SIZE(pxa_resource_hwuart), -}; - -static struct resource pxai2c_resources[] = { - { - .start = 0x40301680, - .end = 0x403016a3, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_I2C, - .end = IRQ_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device pxa_device_i2c = { - .name = "pxa2xx-i2c", - .id = 0, - .resource = pxai2c_resources, - .num_resources = ARRAY_SIZE(pxai2c_resources), -}; - -void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info) -{ - pxa_device_i2c.dev.platform_data = info; -} - -static struct resource pxai2s_resources[] = { - { - .start = 0x40400000, - .end = 0x40400083, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_I2S, - .end = IRQ_I2S, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device pxa_device_i2s = { - .name = "pxa2xx-i2s", - .id = -1, - .resource = pxai2s_resources, - .num_resources = ARRAY_SIZE(pxai2s_resources), -}; - -static u64 pxaficp_dmamask = ~(u32)0; - -struct platform_device pxa_device_ficp = { - .name = "pxa2xx-ir", - .id = -1, - .dev = { - .dma_mask = &pxaficp_dmamask, - .coherent_dma_mask = 0xffffffff, - }, -}; - -void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) -{ - pxa_device_ficp.dev.platform_data = info; -} - -struct platform_device pxa_device_rtc = { - .name = "sa1100-rtc", - .id = -1, -}; diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 465108da2851..0a9434432c55 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -54,7 +54,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = IRQ_GPIO(4), .end = IRQ_GPIO(4), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c new file mode 100644 index 000000000000..0a4b54c21314 --- /dev/null +++ b/arch/arm/mach-pxa/littleton.c @@ -0,0 +1,325 @@ +/* + * linux/arch/arm/mach-pxa/littleton.c + * + * Support for the Marvell Littleton Development Platform. + * + * Author: Jason Chagas (largely modified code) + * Created: Nov 20, 2006 + * Copyright: (C) Copyright 2006 Marvell International Ltd. + * + * 2007-11-22 modified to align with latest kernel + * eric miao <eric.miao@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/clk.h> + +#include <asm/types.h> +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/mfp-pxa300.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pxafb.h> +#include <asm/arch/ssp.h> +#include <asm/arch/littleton.h> + +#include "generic.h" + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + +/* Littleton MFP configurations */ +static mfp_cfg_t littleton_mfp_cfg[] __initdata = { + /* LCD */ + GPIO54_LCD_LDD_0, + GPIO55_LCD_LDD_1, + GPIO56_LCD_LDD_2, + GPIO57_LCD_LDD_3, + GPIO58_LCD_LDD_4, + GPIO59_LCD_LDD_5, + GPIO60_LCD_LDD_6, + GPIO61_LCD_LDD_7, + GPIO62_LCD_LDD_8, + GPIO63_LCD_LDD_9, + GPIO64_LCD_LDD_10, + GPIO65_LCD_LDD_11, + GPIO66_LCD_LDD_12, + GPIO67_LCD_LDD_13, + GPIO68_LCD_LDD_14, + GPIO69_LCD_LDD_15, + GPIO70_LCD_LDD_16, + GPIO71_LCD_LDD_17, + GPIO72_LCD_FCLK, + GPIO73_LCD_LCLK, + GPIO74_LCD_PCLK, + GPIO75_LCD_BIAS, + + /* SSP2 */ + GPIO25_SSP2_SCLK, + GPIO17_SSP2_FRM, + GPIO27_SSP2_TXD, + + /* Debug Ethernet */ + GPIO90_GPIO, +}; + +static struct resource smc91x_resources[] = { + [0] = { + .start = (LITTLETON_ETH_PHYS + 0x300), + .end = (LITTLETON_ETH_PHYS + 0xfffff), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)), + .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES) +/* use bit 30, 31 as the indicator of command parameter number */ +#define CMD0(x) ((0x00000000) | ((x) << 9)) +#define CMD1(x, x1) ((0x40000000) | ((x) << 9) | 0x100 | (x1)) +#define CMD2(x, x1, x2) ((0x80000000) | ((x) << 18) | 0x20000 |\ + ((x1) << 9) | 0x100 | (x2)) + +static uint32_t lcd_panel_reset[] = { + CMD0(0x1), /* reset */ + CMD0(0x0), /* nop */ + CMD0(0x0), /* nop */ + CMD0(0x0), /* nop */ +}; + +static uint32_t lcd_panel_on[] = { + CMD0(0x29), /* Display ON */ + CMD2(0xB8, 0xFF, 0xF9), /* Output Control */ + CMD0(0x11), /* Sleep out */ + CMD1(0xB0, 0x16), /* Wake */ +}; + +static uint32_t lcd_panel_off[] = { + CMD0(0x28), /* Display OFF */ + CMD2(0xB8, 0x80, 0x02), /* Output Control */ + CMD0(0x10), /* Sleep in */ + CMD1(0xB0, 0x00), /* Deep stand by in */ +}; + +static uint32_t lcd_vga_pass_through[] = { + CMD1(0xB0, 0x16), + CMD1(0xBC, 0x80), + CMD1(0xE1, 0x00), + CMD1(0x36, 0x50), + CMD1(0x3B, 0x00), +}; + +static uint32_t lcd_qvga_pass_through[] = { + CMD1(0xB0, 0x16), + CMD1(0xBC, 0x81), + CMD1(0xE1, 0x00), + CMD1(0x36, 0x50), + CMD1(0x3B, 0x22), +}; + +static uint32_t lcd_vga_transfer[] = { + CMD1(0xcf, 0x02), /* Blanking period control (1) */ + CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */ + CMD1(0xd1, 0x01), /* CKV timing control on/off */ + CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */ + CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */ + CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */ + CMD1(0xd5, 0x14), /* ASW timing control (2) */ + CMD0(0x21), /* Invert for normally black display */ + CMD0(0x29), /* Display on */ +}; + +static uint32_t lcd_qvga_transfer[] = { + CMD1(0xd6, 0x02), /* Blanking period control (1) */ + CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */ + CMD1(0xd8, 0x01), /* CKV timing control on/off */ + CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */ + CMD2(0xde, 0x05, 0x0a), /* OEV timing control */ + CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */ + CMD1(0xe0, 0x0a), /* ASW timing control (2) */ + CMD0(0x21), /* Invert for normally black display */ + CMD0(0x29), /* Display on */ +}; + +static uint32_t lcd_panel_config[] = { + CMD2(0xb8, 0xff, 0xf9), /* Output control */ + CMD0(0x11), /* sleep out */ + CMD1(0xba, 0x01), /* Display mode (1) */ + CMD1(0xbb, 0x00), /* Display mode (2) */ + CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */ + CMD1(0xbf, 0x10), /* Drive system change control */ + CMD1(0xb1, 0x56), /* Booster operation setup */ + CMD1(0xb2, 0x33), /* Booster mode setup */ + CMD1(0xb3, 0x11), /* Booster frequency setup */ + CMD1(0xb4, 0x02), /* Op amp/system clock */ + CMD1(0xb5, 0x35), /* VCS voltage */ + CMD1(0xb6, 0x40), /* VCOM voltage */ + CMD1(0xb7, 0x03), /* External display signal */ + CMD1(0xbd, 0x00), /* ASW slew rate */ + CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */ + CMD1(0xc0, 0x11), /* Sleep out FR count (A) */ + CMD1(0xc1, 0x11), /* Sleep out FR count (B) */ + CMD1(0xc2, 0x11), /* Sleep out FR count (C) */ + CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */ + CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */ + CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */ + CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */ + CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */ + CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */ + CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */ + CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */ + CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */ +}; + +static void ssp_reconfig(struct ssp_dev *dev, int nparam) +{ + static int last_nparam = -1; + + /* check if it is necessary to re-config SSP */ + if (nparam == last_nparam) + return; + + ssp_disable(dev); + ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0); + + last_nparam = nparam; +} + +static void ssp_send_cmd(uint32_t *cmd, int num) +{ + static int ssp_initialized; + static struct ssp_dev ssp2; + + int i; + + if (!ssp_initialized) { + ssp_init(&ssp2, 2, SSP_NO_IRQ); + ssp_initialized = 1; + } + + clk_enable(ssp2.ssp->clk); + for (i = 0; i < num; i++, cmd++) { + ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3); + ssp_write_word(&ssp2, *cmd & 0x3fffffff); + + /* FIXME: ssp_flush() is mandatory here to work */ + ssp_flush(&ssp2); + } + clk_disable(ssp2.ssp->clk); +} + +static void littleton_lcd_power(int on, struct fb_var_screeninfo *var) +{ + if (on) { + ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on)); + ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset)); + if (var->xres > 240) { + /* VGA */ + ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through)); + ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config)); + ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer)); + } else { + /* QVGA */ + ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through)); + ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config)); + ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer)); + } + } else + ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off)); +} + +static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = { + [0] = { + /* VGA */ + .pixclock = 38250, + .xres = 480, + .yres = 640, + .bpp = 16, + .hsync_len = 8, + .left_margin = 8, + .right_margin = 24, + .vsync_len = 2, + .upper_margin = 2, + .lower_margin = 4, + .sync = 0, + }, + [1] = { + /* QVGA */ + .pixclock = 153000, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 8, + .left_margin = 8, + .right_margin = 88, + .vsync_len = 2, + .upper_margin = 2, + .lower_margin = 2, + .sync = 0, + }, +}; + +static struct pxafb_mach_info littleton_lcd_info = { + .modes = tpo_tdo24mtea1_modes, + .num_modes = 2, + .lccr0 = LCCR0_Act, + .lccr3 = LCCR3_HSP | LCCR3_VSP, + .pxafb_lcd_power = littleton_lcd_power, +}; + +static void littleton_init_lcd(void) +{ + set_pxa_fb_info(&littleton_lcd_info); +} +#else +static inline void littleton_init_lcd(void) {}; +#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */ + +static void __init littleton_init(void) +{ + /* initialize MFP configurations */ + pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg)); + + /* + * Note: we depend bootloader set the correct + * value to MSC register for SMC91x. + */ + platform_device_register(&smc91x_device); + + littleton_init_lcd(); +} + +MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)") + .phys_io = 0x40000000, + .boot_params = 0xa0000100, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa3xx_init_irq, + .timer = &pxa_timer, + .init_machine = littleton_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 78ebad063cba..afa62ffe3ad5 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -38,6 +38,7 @@ #include <asm/mach/flash.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> #include <asm/arch/lpd270.h> #include <asm/arch/audio.h> #include <asm/arch/pxafb.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 1d3112dc629e..e7ae4bb3e361 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -41,6 +41,7 @@ #include <asm/hardware/sa1111.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> #include <asm/arch/lubbock.h> #include <asm/arch/udc.h> #include <asm/arch/irda.h> @@ -136,9 +137,13 @@ static struct sys_device lubbock_irq_device = { static int __init lubbock_irq_device_init(void) { - int ret = sysdev_class_register(&lubbock_irq_sysclass); - if (ret == 0) - ret = sysdev_register(&lubbock_irq_device); + int ret = -ENODEV; + + if (machine_is_lubbock()) { + ret = sysdev_class_register(&lubbock_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&lubbock_irq_device); + } return ret; } @@ -191,7 +196,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = LUBBOCK_ETH_IRQ, .end = LUBBOCK_ETH_IRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, [2] = { .name = "smc91x-attrib", @@ -206,30 +211,13 @@ static struct resource smc91x_resources[] = { * (to J5) and poking board registers (as done below). Else it's only useful * for the temperature sensors. */ -static struct resource pxa_ssp_resources[] = { - [0] = { - .start = __PREG(SSCR0_P(1)), - .end = __PREG(SSCR0_P(1)) + 0x14, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SSP, - .end = IRQ_SSP, - .flags = IORESOURCE_IRQ, - }, -}; - static struct pxa2xx_spi_master pxa_ssp_master_info = { - .ssp_type = PXA25x_SSP, - .clock_enable = CKEN_SSP, .num_chipselect = 0, }; static struct platform_device pxa_ssp = { .name = "pxa2xx-spi", .id = 1, - .resource = pxa_ssp_resources, - .num_resources = ARRAY_SIZE(pxa_ssp_resources), .dev = { .platform_data = &pxa_ssp_master_info, }, diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c new file mode 100644 index 000000000000..d98ef7ada2f8 --- /dev/null +++ b/arch/arm/mach-pxa/magician.c @@ -0,0 +1,218 @@ +/* + * Support for HTC Magician PDA phones: + * i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110 + * and T-Mobile MDA Compact. + * + * Copyright (c) 2006-2007 Philipp Zabel + * + * Based on hx4700.c, spitz.c and others. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/physmap.h> + +#include <asm/gpio.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/arch/magician.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxafb.h> +#include <asm/arch/irda.h> +#include <asm/arch/ohci.h> + +#include "generic.h" + +/* + * IRDA + */ + +static void magician_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF); +} + +static struct pxaficp_platform_data magician_ficp_info = { + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = magician_irda_transceiver_mode, +}; + +/* + * GPIO Keys + */ + +static struct gpio_keys_button magician_button_table[] = { + {KEY_POWER, GPIO0_MAGICIAN_KEY_POWER, 0, "Power button"}, + {KEY_ESC, GPIO37_MAGICIAN_KEY_HANGUP, 0, "Hangup button"}, + {KEY_F10, GPIO38_MAGICIAN_KEY_CONTACTS, 0, "Contacts button"}, + {KEY_CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, 0, "Calendar button"}, + {KEY_CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, 0, "Camera button"}, + {KEY_UP, GPIO93_MAGICIAN_KEY_UP, 0, "Up button"}, + {KEY_DOWN, GPIO94_MAGICIAN_KEY_DOWN, 0, "Down button"}, + {KEY_LEFT, GPIO95_MAGICIAN_KEY_LEFT, 0, "Left button"}, + {KEY_RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, 0, "Right button"}, + {KEY_KPENTER, GPIO97_MAGICIAN_KEY_ENTER, 0, "Action button"}, + {KEY_RECORD, GPIO98_MAGICIAN_KEY_RECORD, 0, "Record button"}, + {KEY_VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, 0, "Volume up"}, + {KEY_VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, 0, "Volume down"}, + {KEY_PHONE, GPIO102_MAGICIAN_KEY_PHONE, 0, "Phone button"}, + {KEY_PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, 0, "Headset button"}, +}; + +static struct gpio_keys_platform_data gpio_keys_data = { + .buttons = magician_button_table, + .nbuttons = ARRAY_SIZE(magician_button_table), +}; + +static struct platform_device gpio_keys = { + .name = "gpio-keys", + .dev = { + .platform_data = &gpio_keys_data, + }, + .id = -1, +}; + +/* + * LCD - Toppoly TD028STEB1 + */ + +static struct pxafb_mode_info toppoly_modes[] = { + { + .pixclock = 96153, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 11, + .vsync_len = 3, + .left_margin = 19, + .upper_margin = 2, + .right_margin = 10, + .lower_margin = 2, + .sync = 0, + }, +}; + +static struct pxafb_mach_info toppoly_info = { + .modes = toppoly_modes, + .num_modes = 1, + .fixed_modes = 1, + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_PixRsEdg, +}; + +/* + * Backlight + */ + +static void magician_set_bl_intensity(int intensity) +{ + if (intensity) { + PWM_CTRL0 = 1; + PWM_PERVAL0 = 0xc8; + PWM_PWDUTY0 = intensity; + pxa_set_cken(CKEN_PWM0, 1); + } else { + pxa_set_cken(CKEN_PWM0, 0); + } +} + +static struct generic_bl_info backlight_info = { + .default_intensity = 0x64, + .limit_mask = 0x0b, + .max_intensity = 0xc7, + .set_bl_intensity = magician_set_bl_intensity, +}; + +static struct platform_device backlight = { + .name = "corgi-bl", + .dev = { + .platform_data = &backlight_info, + }, + .id = -1, +}; + + +/* + * USB OHCI + */ + +static int magician_ohci_init(struct device *dev) +{ + UHCHR = (UHCHR | UHCHR_SSEP2 | UHCHR_PCPL | UHCHR_CGR) & + ~(UHCHR_SSEP1 | UHCHR_SSEP3 | UHCHR_SSE); + + return 0; +} + +static struct pxaohci_platform_data magician_ohci_info = { + .port_mode = PMM_PERPORT_MODE, + .init = magician_ohci_init, + .power_budget = 0, +}; + + +/* + * StrataFlash + */ + +#define PXA_CS_SIZE 0x04000000 + +static struct resource strataflash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + PXA_CS_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct physmap_flash_data strataflash_data = { + .width = 4, +}; + +static struct platform_device strataflash = { + .name = "physmap-flash", + .id = -1, + .num_resources = 1, + .resource = &strataflash_resource, + .dev = { + .platform_data = &strataflash_data, + }, +}; + +/* + * Platform devices + */ + +static struct platform_device *devices[] __initdata = { + &gpio_keys, + &backlight, + &strataflash, +}; + +static void __init magician_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); + pxa_set_ohci_info(&magician_ohci_info); + pxa_set_ficp_info(&magician_ficp_info); + set_pxa_fb_info(&toppoly_info); +} + + +MACHINE_START(MAGICIAN, "HTC Magician") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa27x_init_irq, + .init_machine = magician_init, + .timer = &pxa_timer, +MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 41d8c6cea62b..345c3deeb02e 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -23,6 +23,7 @@ #include <linux/ioport.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/backlight.h> #include <asm/types.h> #include <asm/setup.h> @@ -38,6 +39,7 @@ #include <asm/mach/flash.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> #include <asm/arch/mainstone.h> #include <asm/arch/audio.h> #include <asm/arch/pxafb.h> @@ -130,9 +132,13 @@ static struct sys_device mainstone_irq_device = { static int __init mainstone_irq_device_init(void) { - int ret = sysdev_class_register(&mainstone_irq_sysclass); - if (ret == 0) - ret = sysdev_register(&mainstone_irq_device); + int ret = -ENODEV; + + if (machine_is_mainstone()) { + ret = sysdev_class_register(&mainstone_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&mainstone_irq_device); + } return ret; } @@ -150,7 +156,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = MAINSTONE_IRQ(3), .end = MAINSTONE_IRQ(3), - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -263,21 +269,60 @@ static struct platform_device mst_flash_device[2] = { }, }; -static void mainstone_backlight_power(int on) +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE +static int mainstone_backlight_update_status(struct backlight_device *bl) { - if (on) { + int brightness = bl->props.brightness; + + if (bl->props.power != FB_BLANK_UNBLANK || + bl->props.fb_blank != FB_BLANK_UNBLANK) + brightness = 0; + + if (brightness != 0) { pxa_gpio_mode(GPIO16_PWM0_MD); pxa_set_cken(CKEN_PWM0, 1); - PWM_CTRL0 = 0; - PWM_PWDUTY0 = 0x3ff; - PWM_PERVAL0 = 0x3ff; - } else { - PWM_CTRL0 = 0; - PWM_PWDUTY0 = 0x0; - PWM_PERVAL0 = 0x3FF; + } + PWM_CTRL0 = 0; + PWM_PWDUTY0 = brightness; + PWM_PERVAL0 = bl->props.max_brightness; + if (brightness == 0) pxa_set_cken(CKEN_PWM0, 0); + return 0; /* pointless return value */ +} + +static int mainstone_backlight_get_brightness(struct backlight_device *bl) +{ + return PWM_PWDUTY0; +} + +static /*const*/ struct backlight_ops mainstone_backlight_ops = { + .update_status = mainstone_backlight_update_status, + .get_brightness = mainstone_backlight_get_brightness, +}; + +static void __init mainstone_backlight_register(void) +{ + struct backlight_device *bl; + + bl = backlight_device_register("mainstone-bl", &pxa_device_fb.dev, + NULL, &mainstone_backlight_ops); + if (IS_ERR(bl)) { + printk(KERN_ERR "mainstone: unable to register backlight: %ld\n", + PTR_ERR(bl)); + return; } + + /* + * broken design - register-then-setup interfaces are + * utterly broken by definition. + */ + bl->props.max_brightness = 1023; + bl->props.brightness = 1023; + backlight_update_status(bl); } +#else +#define mainstone_backlight_register() do { } while (0) +#endif static struct pxafb_mode_info toshiba_ltm04c380k_mode = { .pixclock = 50000, @@ -311,7 +356,6 @@ static struct pxafb_mach_info mainstone_pxafb_info = { .num_modes = 1, .lccr0 = LCCR0_Act, .lccr3 = LCCR3_PCP, - .pxafb_backlight_power = mainstone_backlight_power, }; static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data) @@ -335,12 +379,10 @@ static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_in err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, IRQF_DISABLED, "MMC card detect", data); - if (err) { + if (err) printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - return -1; - } - return 0; + return err; } static void mainstone_mci_setpower(struct device *dev, unsigned int vdd) @@ -473,6 +515,7 @@ static void __init mainstone_init(void) mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode; set_pxa_fb_info(&mainstone_pxafb_info); + mainstone_backlight_register(); pxa_set_mci_info(&mainstone_mci_platform_data); pxa_set_ficp_info(&mainstone_ficp_platform_data); diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c index 436f96574964..ec1b2d8f61c4 100644 --- a/arch/arm/mach-pxa/mfp.c +++ b/arch/arm/mach-pxa/mfp.c @@ -17,9 +17,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/sysdev.h> #include <asm/hardware.h> #include <asm/arch/mfp.h> +#include <asm/arch/mfp-pxa3xx.h> /* mfp_spin_lock is used to ensure that MFP register configuration * (most likely a read-modify-write operation) is atomic, and that @@ -28,43 +30,110 @@ static DEFINE_SPINLOCK(mfp_spin_lock); static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE); + +struct pxa3xx_mfp_pin { + unsigned long config; /* -1 for not configured */ + unsigned long mfpr_off; /* MFPRxx Register offset */ + unsigned long mfpr_run; /* Run-Mode Register Value */ + unsigned long mfpr_lpm; /* Low Power Mode Register Value */ +}; + static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX]; +/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */ +const static unsigned long mfpr_lpm[] = { + MFPR_LPM_INPUT, + MFPR_LPM_DRIVE_LOW, + MFPR_LPM_DRIVE_HIGH, + MFPR_LPM_PULL_LOW, + MFPR_LPM_PULL_HIGH, + MFPR_LPM_FLOAT, +}; + +/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */ +const static unsigned long mfpr_pull[] = { + MFPR_PULL_NONE, + MFPR_PULL_LOW, + MFPR_PULL_HIGH, + MFPR_PULL_BOTH, +}; + +/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */ +const static unsigned long mfpr_edge[] = { + MFPR_EDGE_NONE, + MFPR_EDGE_RISE, + MFPR_EDGE_FALL, + MFPR_EDGE_BOTH, +}; + #define mfpr_readl(off) \ __raw_readl(mfpr_mmio_base + (off)) #define mfpr_writel(off, val) \ __raw_writel(val, mfpr_mmio_base + (off)) +#define mfp_configured(p) ((p)->config != -1) + /* * perform a read-back of any MFPR register to make sure the * previous writings are finished */ #define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0) -static inline void __mfp_config(int pin, unsigned long val) +static inline void __mfp_config_run(struct pxa3xx_mfp_pin *p) { - unsigned long off = mfp_table[pin].mfpr_off; + if (mfp_configured(p)) + mfpr_writel(p->mfpr_off, p->mfpr_run); +} - mfp_table[pin].mfpr_val = val; - mfpr_writel(off, val); +static inline void __mfp_config_lpm(struct pxa3xx_mfp_pin *p) +{ + if (mfp_configured(p)) { + unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR; + if (mfpr_clr != p->mfpr_run) + mfpr_writel(p->mfpr_off, mfpr_clr); + if (p->mfpr_lpm != mfpr_clr) + mfpr_writel(p->mfpr_off, p->mfpr_lpm); + } } -void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num) +void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num) { - int i, pin; - unsigned long val, flags; - mfp_cfg_t *mfp_cfg = mfp_cfgs; + unsigned long flags; + int i; spin_lock_irqsave(&mfp_spin_lock, flags); - for (i = 0; i < num; i++, mfp_cfg++) { - pin = MFP_CFG_PIN(*mfp_cfg); - val = MFP_CFG_VAL(*mfp_cfg); + for (i = 0; i < num; i++, mfp_cfgs++) { + unsigned long tmp, c = *mfp_cfgs; + struct pxa3xx_mfp_pin *p; + int pin, af, drv, lpm, edge, pull; + pin = MFP_PIN(c); BUG_ON(pin >= MFP_PIN_MAX); - - __mfp_config(pin, val); + p = &mfp_table[pin]; + + af = MFP_AF(c); + drv = MFP_DS(c); + lpm = MFP_LPM_STATE(c); + edge = MFP_LPM_EDGE(c); + pull = MFP_PULL(c); + + /* run-mode pull settings will conflict with MFPR bits of + * low power mode state, calculate mfpr_run and mfpr_lpm + * individually if pull != MFP_PULL_NONE + */ + tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv); + + if (likely(pull == MFP_PULL_NONE)) { + p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; + p->mfpr_lpm = p->mfpr_run; + } else { + p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; + p->mfpr_run = tmp | mfpr_pull[pull]; + } + + p->config = c; __mfp_config_run(p); } mfpr_sync(); @@ -96,140 +165,82 @@ void pxa3xx_mfp_write(int mfp, unsigned long val) spin_unlock_irqrestore(&mfp_spin_lock, flags); } -void pxa3xx_mfp_set_afds(int mfp, int af, int ds) -{ - uint32_t mfpr_off, mfpr_val; - unsigned long flags; - - BUG_ON(mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); - mfpr_off = mfp_table[mfp].mfpr_off; - - mfpr_val = mfpr_readl(mfpr_off); - mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK); - mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) | - ((ds & 0x7) << MFPR_DRV_OFFSET)); - - mfpr_writel(mfpr_off, mfpr_val); - mfpr_sync(); - - spin_unlock_irqrestore(&mfp_spin_lock, flags); -} - -void pxa3xx_mfp_set_rdh(int mfp, int rdh) +void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map) { - uint32_t mfpr_off, mfpr_val; - unsigned long flags; - - BUG_ON(mfp >= MFP_PIN_MAX); + struct pxa3xx_mfp_addr_map *p; + unsigned long offset, flags; + int i; spin_lock_irqsave(&mfp_spin_lock, flags); - mfpr_off = mfp_table[mfp].mfpr_off; - - mfpr_val = mfpr_readl(mfpr_off); - mfpr_val &= ~MFPR_RDH_MASK; - - if (likely(rdh)) - mfpr_val |= (1u << MFPR_SS_OFFSET); + for (p = map; p->start != MFP_PIN_INVALID; p++) { + offset = p->offset; + i = p->start; - mfpr_writel(mfpr_off, mfpr_val); - mfpr_sync(); + do { + mfp_table[i].mfpr_off = offset; + mfp_table[i].mfpr_run = 0; + mfp_table[i].mfpr_lpm = 0; + offset += 4; i++; + } while ((i <= p->end) && (p->end != -1)); + } spin_unlock_irqrestore(&mfp_spin_lock, flags); } -void pxa3xx_mfp_set_lpm(int mfp, int lpm) +void __init pxa3xx_init_mfp(void) { - uint32_t mfpr_off, mfpr_val; - unsigned long flags; - - BUG_ON(mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); - - mfpr_off = mfp_table[mfp].mfpr_off; - mfpr_val = mfpr_readl(mfpr_off); - mfpr_val &= ~MFPR_LPM_MASK; - - if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET; - if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET; - if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET; - if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET; - if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET; - - mfpr_writel(mfpr_off, mfpr_val); - mfpr_sync(); + int i; - spin_unlock_irqrestore(&mfp_spin_lock, flags); + for (i = 0; i < ARRAY_SIZE(mfp_table); i++) + mfp_table[i].config = -1; } -void pxa3xx_mfp_set_pull(int mfp, int pull) +#ifdef CONFIG_PM +/* + * Configure the MFPs appropriately for suspend/resume. + * FIXME: this should probably depend on which system state we're + * entering - for instance, we might not want to place MFP pins in + * a pull-down mode if they're an active low chip select, and we're + * just entering standby. + */ +static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state) { - uint32_t mfpr_off, mfpr_val; - unsigned long flags; - - BUG_ON(mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); + int pin; - mfpr_off = mfp_table[mfp].mfpr_off; - mfpr_val = mfpr_readl(mfpr_off); - mfpr_val &= ~MFPR_PULL_MASK; - mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET); - - mfpr_writel(mfpr_off, mfpr_val); - mfpr_sync(); - - spin_unlock_irqrestore(&mfp_spin_lock, flags); + for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) { + struct pxa3xx_mfp_pin *p = &mfp_table[pin]; + __mfp_config_lpm(p); + } + return 0; } -void pxa3xx_mfp_set_edge(int mfp, int edge) +static int pxa3xx_mfp_resume(struct sys_device *d) { - uint32_t mfpr_off, mfpr_val; - unsigned long flags; - - BUG_ON(mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); - - mfpr_off = mfp_table[mfp].mfpr_off; - mfpr_val = mfpr_readl(mfpr_off); - - mfpr_val &= ~MFPR_EDGE_MASK; - mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET; - mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET; + int pin; - mfpr_writel(mfpr_off, mfpr_val); - mfpr_sync(); - - spin_unlock_irqrestore(&mfp_spin_lock, flags); + for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) { + struct pxa3xx_mfp_pin *p = &mfp_table[pin]; + __mfp_config_run(p); + } + return 0; } -void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map) -{ - struct pxa3xx_mfp_addr_map *p; - unsigned long offset, flags; - int i; - - spin_lock_irqsave(&mfp_spin_lock, flags); - - for (p = map; p->start != MFP_PIN_INVALID; p++) { - offset = p->offset; - i = p->start; - - do { - mfp_table[i].mfpr_off = offset; - mfp_table[i].mfpr_val = 0; - offset += 4; i++; - } while ((i <= p->end) && (p->end != -1)); - } +static struct sysdev_class mfp_sysclass = { + set_kset_name("mfp"), + .suspend = pxa3xx_mfp_suspend, + .resume = pxa3xx_mfp_resume, +}; - spin_unlock_irqrestore(&mfp_spin_lock, flags); -} +static struct sys_device mfp_device = { + .id = 0, + .cls = &mfp_sysclass, +}; -void __init pxa3xx_init_mfp(void) +static int __init mfp_init_devicefs(void) { - memset(mfp_table, 0, sizeof(mfp_table)); + sysdev_class_register(&mfp_sysclass); + return sysdev_register(&mfp_device); } +device_initcall(mfp_init_devicefs); +#endif diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c new file mode 100644 index 000000000000..540c3bba5f9a --- /dev/null +++ b/arch/arm/mach-pxa/pcm027.c @@ -0,0 +1,216 @@ +/* + * linux/arch/arm/mach-pxa/pcm027.c + * Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027). + * + * Refer + * http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html + * for additional hardware info + * + * Author: Juergen Kilb + * Created: April 05, 2005 + * Copyright: Phytec Messtechnik GmbH + * e-Mail: armlinux@phytec.de + * + * based on Intel Mainstone Board + * + * Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/arch/hardware.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx_spi.h> +#include <asm/arch/pcm027.h> +#include "generic.h" + +/* + * ABSTRACT: + * + * The PXA270 processor comes with a bunch of hardware on its silicon. + * Not all of this hardware can be used at the same time and not all + * is routed to module's connectors. Also it depends on the baseboard, what + * kind of hardware can be used in which way. + * -> So this file supports the main devices on the CPU card only! + * Refer pcm990-baseboard.c how to extend this features to get a full + * blown system with many common interfaces. + * + * The PCM-027 supports the following interfaces through its connectors and + * will be used in pcm990-baseboard.c: + * + * - LCD support + * - MMC support + * - IDE/CF card + * - FFUART + * - BTUART + * - IRUART + * - AC97 + * - SSP + * - SSP3 + * + * Claimed GPIOs: + * GPIO0 -> IRQ input from RTC + * GPIO2 -> SYS_ENA*) + * GPIO3 -> PWR_SCL + * GPIO4 -> PWR_SDA + * GPIO5 -> PowerCap0*) + * GPIO6 -> PowerCap1*) + * GPIO7 -> PowerCap2*) + * GPIO8 -> PowerCap3*) + * GPIO15 -> /CS1 + * GPIO20 -> /CS2 + * GPIO21 -> /CS3 + * GPIO33 -> /CS5 network controller select + * GPIO52 -> IRQ from network controller + * GPIO78 -> /CS2 + * GPIO80 -> /CS4 + * GPIO90 -> LED0 + * GPIO91 -> LED1 + * GPIO114 -> IRQ from CAN controller + * GPIO117 -> SCL + * GPIO118 -> SDA + * + * *) CPU internal use only + */ + +/* + * SMC91x network controller specific stuff + */ +static struct resource smc91x_resources[] = { + [0] = { + .start = PCM027_ETH_PHYS + 0x300, + .end = PCM027_ETH_PHYS + PCM027_ETH_SIZE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PCM027_ETH_IRQ, + .end = PCM027_ETH_IRQ, + /* note: smc91x's driver doesn't use the trigger bits yet */ + .flags = IORESOURCE_IRQ | PCM027_ETH_IRQ_EDGE, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct physmap_flash_data pcm027_flash_data = { + .width = 4, +}; + +static struct resource pcm027_flash_resource = { + .start = PCM027_FLASH_PHYS, + .end = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 , + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pcm027_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &pcm027_flash_data, + }, + .resource = &pcm027_flash_resource, + .num_resources = 1, +}; + +#ifdef CONFIG_LEDS_GPIO + +static struct gpio_led pcm027_led[] = { + { + .name = "led0:red", /* FIXME */ + .gpio = PCM027_LED_CPU + }, + { + .name = "led1:green", /* FIXME */ + .gpio = PCM027_LED_HEARD_BEAT + }, +}; + +static struct gpio_led_platform_data pcm027_led_data = { + .num_leds = ARRAY_SIZE(pcm027_led), + .leds = pcm027_led +}; + +static struct platform_device pcm027_led_dev = { + .name = "leds-gpio", + .id = 0, + .dev = { + .platform_data = &pcm027_led_data, + }, +}; + +#endif /* CONFIG_LEDS_GPIO */ + +/* + * declare the available device resources on this board + */ +static struct platform_device *devices[] __initdata = { + &smc91x_device, + &pcm027_flash, +#ifdef CONFIG_LEDS_GPIO + &pcm027_led_dev +#endif +}; + +/* + * pcm027_init - breath some life into the board + */ +static void __init pcm027_init(void) +{ + /* system bus arbiter setting + * - Core_Park + * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4 + */ + ARB_CNTRL = ARB_CORE_PARK | 0x234; + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + /* LEDs (on demand only) */ +#ifdef CONFIG_LEDS_GPIO + pxa_gpio_mode(PCM027_LED_CPU | GPIO_OUT); + pxa_gpio_mode(PCM027_LED_HEARD_BEAT | GPIO_OUT); +#endif /* CONFIG_LEDS_GPIO */ + + /* at last call the baseboard to initialize itself */ +#ifdef CONFIG_MACH_PCM990_BASEBOARD + pcm990_baseboard_init(); +#endif +} + +static void __init pcm027_map_io(void) +{ + pxa_map_io(); + + /* initialize sleep mode regs (wake-up sources, etc) */ + PGSR0 = 0x01308000; + PGSR1 = 0x00CF0002; + PGSR2 = 0x0E294000; + PGSR3 = 0x0000C000; + PWER = 0x40000000 | PWER_GPIO0 | PWER_GPIO1; + PRER = 0x00000000; + PFER = 0x00000003; +} + +MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270") + /* Maintainer: Pengutronix */ + .boot_params = 0xa0000100, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pcm027_map_io, + .init_irq = pxa27x_init_irq, + .timer = &pxa_timer, + .init_machine = pcm027_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c new file mode 100644 index 000000000000..3dda16a20049 --- /dev/null +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -0,0 +1,330 @@ +/* + * arch/arm/mach-pxa/pcm990-baseboard.c + * Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990). + * + * Refer + * http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html + * for additional hardware info + * + * Author: Juergen Kilb + * Created: April 05, 2005 + * Copyright: Phytec Messtechnik GmbH + * e-Mail: armlinux@phytec.de + * + * based on Intel Mainstone Board + * + * Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/ide.h> +#include <asm/mach/map.h> +#include <asm/arch/pxa-regs.h> +#include <asm/arch/mmc.h> +#include <asm/arch/ohci.h> +#include <asm/arch/pcm990_baseboard.h> + +/* + * The PCM-990 development baseboard uses PCM-027's hardeware in the + * following way: + * + * - LCD support is in use + * - GPIO16 is output for back light on/off with PWM + * - GPIO58 ... GPIO73 are outputs for display data + * - GPIO74 is output output for LCDFCLK + * - GPIO75 is output for LCDLCLK + * - GPIO76 is output for LCDPCLK + * - GPIO77 is output for LCDBIAS + * - MMC support is in use + * - GPIO32 is output for MMCCLK + * - GPIO92 is MMDAT0 + * - GPIO109 is MMDAT1 + * - GPIO110 is MMCS0 + * - GPIO111 is MMCS1 + * - GPIO112 is MMCMD + * - IDE/CF card is in use + * - GPIO48 is output /POE + * - GPIO49 is output /PWE + * - GPIO50 is output /PIOR + * - GPIO51 is output /PIOW + * - GPIO54 is output /PCE2 + * - GPIO55 is output /PREG + * - GPIO56 is input /PWAIT + * - GPIO57 is output /PIOS16 + * - GPIO79 is output PSKTSEL + * - GPIO85 is output /PCE1 + * - FFUART is in use + * - GPIO34 is input FFRXD + * - GPIO35 is input FFCTS + * - GPIO36 is input FFDCD + * - GPIO37 is input FFDSR + * - GPIO38 is input FFRI + * - GPIO39 is output FFTXD + * - GPIO40 is output FFDTR + * - GPIO41 is output FFRTS + * - BTUART is in use + * - GPIO42 is input BTRXD + * - GPIO43 is output BTTXD + * - GPIO44 is input BTCTS + * - GPIO45 is output BTRTS + * - IRUART is in use + * - GPIO46 is input STDRXD + * - GPIO47 is output STDTXD + * - AC97 is in use*) + * - GPIO28 is input AC97CLK + * - GPIO29 is input AC97DatIn + * - GPIO30 is output AC97DatO + * - GPIO31 is output AC97SYNC + * - GPIO113 is output AC97_RESET + * - SSP is in use + * - GPIO23 is output SSPSCLK + * - GPIO24 is output chip select to Max7301 + * - GPIO25 is output SSPTXD + * - GPIO26 is input SSPRXD + * - GPIO27 is input for Max7301 IRQ + * - GPIO53 is input SSPSYSCLK + * - SSP3 is in use + * - GPIO81 is output SSPTXD3 + * - GPIO82 is input SSPRXD3 + * - GPIO83 is output SSPSFRM + * - GPIO84 is output SSPCLK3 + * + * Otherwise claimed GPIOs: + * GPIO1 -> IRQ from user switch + * GPIO9 -> IRQ from power management + * GPIO10 -> IRQ from WML9712 AC97 controller + * GPIO11 -> IRQ from IDE controller + * GPIO12 -> IRQ from CF controller + * GPIO13 -> IRQ from CF controller + * GPIO14 -> GPIO free + * GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path) + * GPIO19 -> GPIO free + * GPIO20 -> /SDCS2 + * GPIO21 -> /CS3 PC card socket select + * GPIO33 -> /CS5 network controller select + * GPIO78 -> /CS2 (16 bit wide data path) + * GPIO80 -> /CS4 (16 bit wide data path) + * GPIO86 -> GPIO free + * GPIO87 -> GPIO free + * GPIO90 -> LED0 on CPU module + * GPIO91 -> LED1 on CPI module + * GPIO117 -> SCL + * GPIO118 -> SDA + */ + +static unsigned long pcm990_irq_enabled; + +static void pcm990_mask_ack_irq(unsigned int irq) +{ + int pcm990_irq = (irq - PCM027_IRQ(0)); + PCM990_INTMSKENA = (pcm990_irq_enabled &= ~(1 << pcm990_irq)); +} + +static void pcm990_unmask_irq(unsigned int irq) +{ + int pcm990_irq = (irq - PCM027_IRQ(0)); + /* the irq can be acknowledged only if deasserted, so it's done here */ + PCM990_INTSETCLR |= 1 << pcm990_irq; + PCM990_INTMSKENA = (pcm990_irq_enabled |= (1 << pcm990_irq)); +} + +static struct irq_chip pcm990_irq_chip = { + .mask_ack = pcm990_mask_ack_irq, + .unmask = pcm990_unmask_irq, +}; + +static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled; + + do { + GEDR(PCM990_CTRL_INT_IRQ_GPIO) = + GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO); + if (likely(pending)) { + irq = PCM027_IRQ(0) + __ffs(pending); + desc = irq_desc + irq; + desc_handle_irq(irq, desc); + } + pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled; + } while (pending); +} + +static void __init pcm990_init_irq(void) +{ + int irq; + + /* setup extra PCM990 irqs */ + for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) { + set_irq_chip(irq, &pcm990_irq_chip); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + + PCM990_INTMSKENA = 0x00; /* disable all Interrupts */ + PCM990_INTSETCLR = 0xFF; + + set_irq_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler); + set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE); +} + +static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int, + void *data) +{ + int err; + + /* + * enable GPIO for PXA27x MMC controller + */ + pxa_gpio_mode(GPIO32_MMCCLK_MD); + pxa_gpio_mode(GPIO112_MMCCMD_MD); + pxa_gpio_mode(GPIO92_MMCDAT0_MD); + pxa_gpio_mode(GPIO109_MMCDAT1_MD); + pxa_gpio_mode(GPIO110_MMCDAT2_MD); + pxa_gpio_mode(GPIO111_MMCDAT3_MD); + + err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED, + "MMC card detect", data); + if (err) + printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC " + "card detect IRQ\n"); + + return err; +} + +static void pcm990_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + + if ((1 << vdd) & p_d->ocr_mask) + __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) = + PCM990_CTRL_MMC2PWR; + else + __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) = + ~PCM990_CTRL_MMC2PWR; +} + +static void pcm990_mci_exit(struct device *dev, void *data) +{ + free_irq(PCM027_MMCDET_IRQ, data); +} + +#define MSECS_PER_JIFFY (1000/HZ) + +static struct pxamci_platform_data pcm990_mci_platform_data = { + .detect_delay = 250 / MSECS_PER_JIFFY, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .init = pcm990_mci_init, + .setpower = pcm990_mci_setpower, + .exit = pcm990_mci_exit, +}; + +/* + * init OHCI hardware to work with + * + * Note: Only USB port 1 (host only) is connected + * + * GPIO88 (USBHPWR#1): overcurrent in, overcurrent when low + * GPIO89 (USBHPEN#1): power-on out, on when low + */ +static int pcm990_ohci_init(struct device *dev) +{ + pxa_gpio_mode(PCM990_USB_OVERCURRENT); + pxa_gpio_mode(PCM990_USB_PWR_EN); + /* + * disable USB port 2 and 3 + * power sense is active low + */ + UHCHR = ((UHCHR) | UHCHR_PCPL | UHCHR_PSPL | UHCHR_SSEP2 | + UHCHR_SSEP3) & ~(UHCHR_SSEP1 | UHCHR_SSE); + /* + * wait 10ms after Power on + * overcurrent per port + * power switch per port + */ + UHCRHDA = (5<<24) | (1<<11) | (1<<8); /* FIXME: Required? */ + + return 0; +} + +static struct pxaohci_platform_data pcm990_ohci_platform_data = { + .port_mode = PMM_PERPORT_MODE, + .init = pcm990_ohci_init, + .exit = NULL, +}; + +/* + * AC97 support + * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ + */ +static struct resource pxa27x_ac97_resources[] = { + [0] = { + .start = 0x40500000, + .end = 0x40500000 + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_AC97, + .end = IRQ_AC97, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 pxa_ac97_dmamask = 0xffffffffUL; + +static struct platform_device pxa27x_device_ac97 = { + .name = "pxa2xx-ac97", + .id = -1, + .dev = { + .dma_mask = &pxa_ac97_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pxa27x_ac97_resources), + .resource = pxa27x_ac97_resources, +}; + +/* + * enable generic access to the base board control CPLDs U6 and U7 + */ +static struct map_desc pcm990_io_desc[] __initdata = { + { + .virtual = PCM990_CTRL_BASE, + .pfn = __phys_to_pfn(PCM990_CTRL_PHYS), + .length = PCM990_CTRL_SIZE, + .type = MT_DEVICE /* CPLD */ + }, { + .virtual = PCM990_CF_PLD_BASE, + .pfn = __phys_to_pfn(PCM990_CF_PLD_PHYS), + .length = PCM990_CF_PLD_SIZE, + .type = MT_DEVICE /* CPLD */ + } +}; + +/* + * system init for baseboard usage. Will be called by pcm027 init. + * + * Add platform devices present on this baseboard and init + * them from CPU side as far as required to use them later on + */ +void __init pcm990_baseboard_init(void) +{ + /* register CPLD access */ + iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc)); + + /* register CPLD's IRQ controller */ + pcm990_init_irq(); + + platform_device_register(&pxa27x_device_ac97); + + /* MMC */ + pxa_set_mci_info(&pcm990_mci_platform_data); + + /* USB host */ + pxa_set_ohci_info(&pcm990_ohci_platform_data); + + printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n"); +} diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index a941c71c7d06..039194cbe477 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -38,34 +38,37 @@ int pxa_pm_enter(suspend_state_t state) iwmmxt_task_disable(NULL); #endif - pxa_cpu_pm_fns->save(sleep_save); + /* skip registers saving for standby */ + if (state != PM_SUSPEND_STANDBY) { + pxa_cpu_pm_fns->save(sleep_save); + /* before sleeping, calculate and save a checksum */ + for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) + sleep_save_checksum += sleep_save[i]; + } /* Clear sleep reset status */ RCSR = RCSR_SMR; - /* before sleeping, calculate and save a checksum */ - for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) - sleep_save_checksum += sleep_save[i]; - /* *** go zzz *** */ pxa_cpu_pm_fns->enter(state); cpu_init(); - /* after sleeping, validate the checksum */ - for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) - checksum += sleep_save[i]; + if (state != PM_SUSPEND_STANDBY) { + /* after sleeping, validate the checksum */ + for (i = 0; i < pxa_cpu_pm_fns->save_size - 1; i++) + checksum += sleep_save[i]; - /* if invalid, display message and wait for a hardware reset */ - if (checksum != sleep_save_checksum) { + /* if invalid, display message and wait for a hardware reset */ + if (checksum != sleep_save_checksum) { #ifdef CONFIG_ARCH_LUBBOCK - LUB_HEXLED = 0xbadbadc5; + LUB_HEXLED = 0xbadbadc5; #endif - while (1) - pxa_cpu_pm_fns->enter(state); + while (1) + pxa_cpu_pm_fns->enter(state); + } + pxa_cpu_pm_fns->restore(sleep_save); } - pxa_cpu_pm_fns->restore(sleep_save); - pr_debug("*** made it back from resume\n"); return 0; diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 655668d4d0e9..dd54496083cb 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -215,12 +215,10 @@ static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC card detect", data); - if (err) { + if (err) printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - return -1; - } - return 0; + return err; } static void poodle_mci_setpower(struct device *dev, unsigned int vdd) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 006a6e09589c..ddd05bf78e02 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -123,12 +123,15 @@ static struct clk pxa25x_clks[] = { INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev), INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev), INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev), + + INIT_CKEN("SSPCLK", SSP, 3686400, 0, &pxa25x_device_ssp.dev), + INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev), + INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev), + /* INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), - INIT_CKEN("SSPCLK", SSP, 3686400, 0, NULL), INIT_CKEN("I2SCLK", I2S, 14745600, 0, NULL), - INIT_CKEN("NSSPCLK", NSSP, 3686400, 0, NULL), */ INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL), }; @@ -216,8 +219,6 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save) static void pxa25x_cpu_pm_enter(suspend_state_t state) { - CKEN = 0; - switch (state) { case PM_SUSPEND_MEM: /* set resume return address */ @@ -239,6 +240,8 @@ static void __init pxa25x_init_pm(void) { pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns; } +#else +static inline void pxa25x_init_pm(void) {} #endif /* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm @@ -290,16 +293,15 @@ void __init pxa25x_init_irq(void) } static struct platform_device *pxa25x_devices[] __initdata = { - &pxa_device_mci, &pxa_device_udc, - &pxa_device_fb, &pxa_device_ffuart, &pxa_device_btuart, &pxa_device_stuart, - &pxa_device_i2c, &pxa_device_i2s, - &pxa_device_ficp, &pxa_device_rtc, + &pxa25x_device_ssp, + &pxa25x_device_nssp, + &pxa25x_device_assp, }; static int __init pxa25x_init(void) @@ -315,9 +317,9 @@ static int __init pxa25x_init(void) if ((ret = pxa_init_dma(16))) return ret; -#ifdef CONFIG_PM + pxa25x_init_pm(); -#endif + ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 57efebdc4324..96cf274ec7cb 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -21,6 +21,7 @@ #include <asm/irq.h> #include <asm/arch/irqs.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> #include <asm/arch/ohci.h> #include <asm/arch/pm.h> #include <asm/arch/dma.h> @@ -151,11 +152,12 @@ static struct clk pxa27x_clks[] = { INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev), INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL), + INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), + INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), + INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), + /* INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL), - INIT_CKEN("SSPCLK", SSP1, 13000000, 0, NULL), - INIT_CKEN("SSPCLK", SSP2, 13000000, 0, NULL), - INIT_CKEN("SSPCLK", SSP3, 13000000, 0, NULL), INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL), INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL), INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL), @@ -264,12 +266,6 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_standby(void); - if (state == PM_SUSPEND_STANDBY) - CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER) | - (1 << CKEN_LCD) | (1 << CKEN_PWM0); - else - CKEN = (1 << CKEN_MEMC) | (1 << CKEN_OSTIMER); - /* ensure voltage-change sequencer not initiated, which hangs */ PCFR &= ~PCFR_FVC; @@ -305,6 +301,8 @@ static void __init pxa27x_init_pm(void) { pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns; } +#else +static inline void pxa27x_init_pm(void) {} #endif /* PXA27x: Various gpios can issue wakeup events. This logic only @@ -374,37 +372,6 @@ void __init pxa27x_init_irq(void) * device registration specific to PXA27x. */ -static u64 pxa27x_dmamask = 0xffffffffUL; - -static struct resource pxa27x_ohci_resources[] = { - [0] = { - .start = 0x4C000000, - .end = 0x4C00ff6f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USBH1, - .end = IRQ_USBH1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device pxa27x_device_ohci = { - .name = "pxa27x-ohci", - .id = -1, - .dev = { - .dma_mask = &pxa27x_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(pxa27x_ohci_resources), - .resource = pxa27x_ohci_resources, -}; - -void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) -{ - pxa27x_device_ohci.dev.platform_data = info; -} - static struct resource i2c_power_resources[] = { { .start = 0x40f00180, @@ -430,18 +397,16 @@ void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { - &pxa_device_mci, &pxa_device_udc, - &pxa_device_fb, &pxa_device_ffuart, &pxa_device_btuart, &pxa_device_stuart, - &pxa_device_i2c, &pxa_device_i2s, - &pxa_device_ficp, &pxa_device_rtc, &pxa27x_device_i2c_power, - &pxa27x_device_ohci, + &pxa27x_device_ssp1, + &pxa27x_device_ssp2, + &pxa27x_device_ssp3, }; static int __init pxa27x_init(void) @@ -452,9 +417,9 @@ static int __init pxa27x_init(void) if ((ret = pxa_init_dma(32))) return ret; -#ifdef CONFIG_PM + pxa27x_init_pm(); -#endif + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } return ret; diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 37e93f9ba8fc..5cbf057a1b32 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -19,6 +19,7 @@ #include <linux/pm.h> #include <linux/platform_device.h> #include <linux/irq.h> +#include <linux/io.h> #include <asm/hardware.h> #include <asm/arch/pxa3xx-regs.h> @@ -189,8 +190,237 @@ static struct clk pxa3xx_clks[] = { PXA3xx_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev), + PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev), + + PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), + PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), + PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), + PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev), + + PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev), + PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev), + PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev), +}; + +#ifdef CONFIG_PM +#define SLEEP_SAVE_SIZE 4 + +#define ISRAM_START 0x5c000000 +#define ISRAM_SIZE SZ_256K + +static void __iomem *sram; +static unsigned long wakeup_src; + +static void pxa3xx_cpu_pm_save(unsigned long *sleep_save) +{ + pr_debug("PM: CKENA=%08x CKENB=%08x\n", CKENA, CKENB); + + if (CKENA & (1 << CKEN_USBH)) { + printk(KERN_ERR "PM: USB host clock not stopped?\n"); + CKENA &= ~(1 << CKEN_USBH); + } +// CKENA |= 1 << (CKEN_ISC & 31); + + /* + * Low power modes require the HSIO2 clock to be enabled. + */ + CKENB |= 1 << (CKEN_HSIO2 & 31); +} + +static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save) +{ + CKENB &= ~(1 << (CKEN_HSIO2 & 31)); +} + +/* + * Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic + * memory controller has to be reinitialised, so we place some code + * in the SRAM to perform this function. + * + * We disable FIQs across the standby - otherwise, we might receive a + * FIQ while the SDRAM is unavailable. + */ +static void pxa3xx_cpu_standby(unsigned int pwrmode) +{ + extern const char pm_enter_standby_start[], pm_enter_standby_end[]; + void (*fn)(unsigned int) = (void __force *)(sram + 0x8000); + + memcpy_toio(sram + 0x8000, pm_enter_standby_start, + pm_enter_standby_end - pm_enter_standby_start); + + AD2D0SR = ~0; + AD2D1SR = ~0; + AD2D0ER = wakeup_src; + AD2D1ER = 0; + ASCR = ASCR; + ARSR = ARSR; + + local_fiq_disable(); + fn(pwrmode); + local_fiq_enable(); + + AD2D0ER = 0; + AD2D1ER = 0; + + printk("PM: AD2D0SR=%08x ASCR=%08x\n", AD2D0SR, ASCR); +} + +static void pxa3xx_cpu_pm_enter(suspend_state_t state) +{ + /* + * Don't sleep if no wakeup sources are defined + */ + if (wakeup_src == 0) + return; + + switch (state) { + case PM_SUSPEND_STANDBY: + pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2); + break; + + case PM_SUSPEND_MEM: + break; + } +} + +static int pxa3xx_cpu_pm_valid(suspend_state_t state) +{ + return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; +} + +static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = { + .save_size = SLEEP_SAVE_SIZE, + .save = pxa3xx_cpu_pm_save, + .restore = pxa3xx_cpu_pm_restore, + .valid = pxa3xx_cpu_pm_valid, + .enter = pxa3xx_cpu_pm_enter, }; +static void __init pxa3xx_init_pm(void) +{ + sram = ioremap(ISRAM_START, ISRAM_SIZE); + if (!sram) { + printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n"); + return; + } + + /* + * Since we copy wakeup code into the SRAM, we need to ensure + * that it is preserved over the low power modes. Note: bit 8 + * is undocumented in the developer manual, but must be set. + */ + AD1R |= ADXR_L2 | ADXR_R0; + AD2R |= ADXR_L2 | ADXR_R0; + AD3R |= ADXR_L2 | ADXR_R0; + + /* + * Clear the resume enable registers. + */ + AD1D0ER = 0; + AD2D0ER = 0; + AD2D1ER = 0; + AD3ER = 0; + + pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns; +} + +static int pxa3xx_set_wake(unsigned int irq, unsigned int on) +{ + unsigned long flags, mask = 0; + + switch (irq) { + case IRQ_SSP3: + mask = ADXER_MFP_WSSP3; + break; + case IRQ_MSL: + mask = ADXER_WMSL0; + break; + case IRQ_USBH2: + case IRQ_USBH1: + mask = ADXER_WUSBH; + break; + case IRQ_KEYPAD: + mask = ADXER_WKP; + break; + case IRQ_AC97: + mask = ADXER_MFP_WAC97; + break; + case IRQ_USIM: + mask = ADXER_WUSIM0; + break; + case IRQ_SSP2: + mask = ADXER_MFP_WSSP2; + break; + case IRQ_I2C: + mask = ADXER_MFP_WI2C; + break; + case IRQ_STUART: + mask = ADXER_MFP_WUART3; + break; + case IRQ_BTUART: + mask = ADXER_MFP_WUART2; + break; + case IRQ_FFUART: + mask = ADXER_MFP_WUART1; + break; + case IRQ_MMC: + mask = ADXER_MFP_WMMC1; + break; + case IRQ_SSP: + mask = ADXER_MFP_WSSP1; + break; + case IRQ_RTCAlrm: + mask = ADXER_WRTC; + break; + case IRQ_SSP4: + mask = ADXER_MFP_WSSP4; + break; + case IRQ_TSI: + mask = ADXER_WTSI; + break; + case IRQ_USIM2: + mask = ADXER_WUSIM1; + break; + case IRQ_MMC2: + mask = ADXER_MFP_WMMC2; + break; + case IRQ_NAND: + mask = ADXER_MFP_WFLASH; + break; + case IRQ_USB2: + mask = ADXER_WUSB2; + break; + case IRQ_WAKEUP0: + mask = ADXER_WEXTWAKE0; + break; + case IRQ_WAKEUP1: + mask = ADXER_WEXTWAKE1; + break; + case IRQ_MMC3: + mask = ADXER_MFP_GEN12; + break; + } + + local_irq_save(flags); + if (on) + wakeup_src |= mask; + else + wakeup_src &= ~mask; + local_irq_restore(flags); + + return 0; +} + +static void pxa3xx_init_irq_pm(void) +{ + pxa_init_irq_set_wake(pxa3xx_set_wake); +} + +#else +static inline void pxa3xx_init_pm(void) {} +static inline void pxa3xx_init_irq_pm(void) {} +#endif + void __init pxa3xx_init_irq(void) { /* enable CP6 access */ @@ -202,6 +432,7 @@ void __init pxa3xx_init_irq(void) pxa_init_irq_low(); pxa_init_irq_high(); pxa_init_irq_gpio(128); + pxa3xx_init_irq_pm(); } /* @@ -209,16 +440,16 @@ void __init pxa3xx_init_irq(void) */ static struct platform_device *devices[] __initdata = { - &pxa_device_mci, &pxa_device_udc, - &pxa_device_fb, &pxa_device_ffuart, &pxa_device_btuart, &pxa_device_stuart, - &pxa_device_i2c, &pxa_device_i2s, - &pxa_device_ficp, &pxa_device_rtc, + &pxa27x_device_ssp1, + &pxa27x_device_ssp2, + &pxa27x_device_ssp3, + &pxa3xx_device_ssp4, }; static int __init pxa3xx_init(void) @@ -231,6 +462,8 @@ static int __init pxa3xx_init(void) if ((ret = pxa_init_dma(32))) return ret; + pxa3xx_init_pm(); + return platform_add_devices(devices, ARRAY_SIZE(devices)); } return 0; diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h index da4769caaf72..047909a76651 100644 --- a/arch/arm/mach-pxa/sharpsl.h +++ b/arch/arm/mach-pxa/sharpsl.h @@ -26,28 +26,15 @@ void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo); /* - * SharpSL Backlight + * SharpSL/Corgi LCD Driver */ -void corgi_bl_set_intensity(int intensity); -void spitz_bl_set_intensity(int intensity); -void akita_bl_set_intensity(int intensity); - - -/* - * SharpSL Touchscreen Driver - */ -unsigned long corgi_get_hsync_len(void); -unsigned long spitz_get_hsync_len(void); -void corgi_put_hsync(void); -void spitz_put_hsync(void); -void corgi_wait_hsync(void); -void spitz_wait_hsync(void); +void corgi_lcdtg_suspend(void); +void corgi_lcdtg_hw_init(int mode); /* * SharpSL Battery/PM Driver */ - #define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) /* MAX1111 Channel Definitions */ diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index d0447723b73a..14bb4a93ea52 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -16,6 +16,7 @@ #include <asm/hardware.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> #define MDREFR_KDIV 0x200a4000 // all banks #define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0 @@ -49,6 +50,7 @@ pxa_cpu_save_sp: str r0, [r1] ldr pc, [sp], #4 +#ifdef CONFIG_PXA27x /* * pxa27x_cpu_suspend() * @@ -104,9 +106,11 @@ ENTRY(pxa27x_cpu_suspend) @ align execution to a cache line b pxa_cpu_do_suspend +#endif +#ifdef CONFIG_PXA25x /* - * pxa27x_cpu_suspend() + * pxa25x_cpu_suspend() * * Forces CPU into sleep state. * @@ -169,6 +173,7 @@ ENTRY(pxa25x_cpu_suspend) mcr p14, 0, r0, c6, c0, 0 orr r0, r0, #2 @ initiate change bit b pxa_cpu_do_suspend +#endif .ltorg .align 5 @@ -208,7 +213,7 @@ pxa_cpu_do_suspend: 20: b 20b @ loop waiting for sleep /* - * cpu_pxa_resume() + * pxa_cpu_resume() * * entry point from bootloader into kernel during resume * diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 2d78199d24af..5078edeadf96 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -271,6 +271,55 @@ static struct platform_device spitzled_device = { /* * Spitz Touch Screen Device */ + +static unsigned long (*get_hsync_invperiod)(struct device *dev); + +static void inline sharpsl_wait_sync(int gpio) +{ + while((GPLR(gpio) & GPIO_bit(gpio)) == 0); + while((GPLR(gpio) & GPIO_bit(gpio)) != 0); +} + +static struct device *spitz_pxafb_dev; + +static int is_pxafb_device(struct device * dev, void * data) +{ + struct platform_device *pdev = container_of(dev, struct platform_device, dev); + + return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0); +} + +static unsigned long spitz_get_hsync_invperiod(void) +{ +#ifdef CONFIG_FB_PXA + if (!spitz_pxafb_dev) { + spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); + if (!spitz_pxafb_dev) + return 0; + } + if (!get_hsync_invperiod) + get_hsync_invperiod = symbol_get(pxafb_get_hsync_time); + if (!get_hsync_invperiod) +#endif + return 0; + + return get_hsync_invperiod(spitz_pxafb_dev); +} + +static void spitz_put_hsync(void) +{ + put_device(spitz_pxafb_dev); + if (get_hsync_invperiod) + symbol_put(pxafb_get_hsync_time); + spitz_pxafb_dev = NULL; + get_hsync_invperiod = NULL; +} + +static void spitz_wait_hsync(void) +{ + sharpsl_wait_sync(SPITZ_GPIO_HSYNC); +} + static struct resource spitzts_resources[] = { [0] = { .start = SPITZ_IRQ_GPIO_TP_INT, @@ -280,9 +329,9 @@ static struct resource spitzts_resources[] = { }; static struct corgits_machinfo spitz_ts_machinfo = { - .get_hsync_len = spitz_get_hsync_len, - .put_hsync = spitz_put_hsync, - .wait_hsync = spitz_wait_hsync, + .get_hsync_invperiod = spitz_get_hsync_invperiod, + .put_hsync = spitz_put_hsync, + .wait_hsync = spitz_wait_hsync, }; static struct platform_device spitzts_device = { @@ -325,12 +374,10 @@ static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, vo err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC card detect", data); - if (err) { + if (err) printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - return -1; - } - return 0; + return err; } static void spitz_mci_setpower(struct device *dev, unsigned int vdd) @@ -423,6 +470,14 @@ static struct pxaficp_platform_data spitz_ficp_platform_data = { * Spitz PXA Framebuffer */ +static void spitz_lcd_power(int on, struct fb_var_screeninfo *var) +{ + if (on) + corgi_lcdtg_hw_init(var->xres); + else + corgi_lcdtg_suspend(); +} + static struct pxafb_mode_info spitz_pxafb_modes[] = { { .pixclock = 19231, @@ -520,6 +575,27 @@ static void __init common_init(void) set_pxa_fb_info(&spitz_pxafb_info); } +#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) +static void spitz_bl_set_intensity(int intensity) +{ + if (intensity > 0x10) + intensity += 0x10; + + /* Bits 0-4 are accessed via the SSP interface */ + corgi_ssp_blduty_set(intensity & 0x1f); + + /* Bit 5 is via SCOOP */ + if (intensity & 0x0020) + reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); + else + set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); + + if (intensity) + set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); + else + reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); +} + static void __init spitz_init(void) { platform_scoop_config = &spitz_pcmcia_config; @@ -530,6 +606,7 @@ static void __init spitz_init(void) platform_device_register(&spitzscoop2_device); } +#endif #ifdef CONFIG_MACH_AKITA /* @@ -542,6 +619,26 @@ struct platform_device akitaioexp_device = { EXPORT_SYMBOL_GPL(akitaioexp_device); +static void akita_bl_set_intensity(int intensity) +{ + if (intensity > 0x10) + intensity += 0x10; + + /* Bits 0-4 are accessed via the SSP interface */ + corgi_ssp_blduty_set(intensity & 0x1f); + + /* Bit 5 is via IO-Expander */ + if (intensity & 0x0020) + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); + else + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); + + if (intensity) + akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); + else + akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); +} + static void __init akita_init(void) { spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; @@ -558,7 +655,6 @@ static void __init akita_init(void) } #endif - static void __init fixup_spitz(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index b2eb38543d1c..00af7f2fed66 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -32,45 +32,27 @@ #include <linux/ioport.h> #include <linux/init.h> #include <linux/mutex.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/platform_device.h> + #include <asm/io.h> #include <asm/irq.h> #include <asm/hardware.h> #include <asm/arch/ssp.h> #include <asm/arch/pxa-regs.h> - -#define PXA_SSP_PORTS 3 +#include <asm/arch/regs-ssp.h> #define TIMEOUT 100000 -struct ssp_info_ { - int irq; - u32 clock; -}; - -/* - * SSP port clock and IRQ settings - */ -static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = { -#if defined (CONFIG_PXA27x) - {IRQ_SSP, CKEN_SSP1}, - {IRQ_SSP2, CKEN_SSP2}, - {IRQ_SSP3, CKEN_SSP3}, -#else - {IRQ_SSP, CKEN_SSP}, - {IRQ_NSSP, CKEN_NSSP}, - {IRQ_ASSP, CKEN_ASSP}, -#endif -}; - -static DEFINE_MUTEX(mutex); -static int use_count[PXA_SSP_PORTS] = {0, 0, 0}; - static irqreturn_t ssp_interrupt(int irq, void *dev_id) { struct ssp_dev *dev = dev_id; - unsigned int status = SSSR_P(dev->port); + struct ssp_device *ssp = dev->ssp; + unsigned int status; - SSSR_P(dev->port) = status; /* clear status bits */ + status = __raw_readl(ssp->mmio_base + SSSR); + __raw_writel(status, ssp->mmio_base + SSSR); if (status & SSSR_ROR) printk(KERN_WARNING "SSP(%d): receiver overrun\n", dev->port); @@ -99,15 +81,16 @@ static irqreturn_t ssp_interrupt(int irq, void *dev_id) */ int ssp_write_word(struct ssp_dev *dev, u32 data) { + struct ssp_device *ssp = dev->ssp; int timeout = TIMEOUT; - while (!(SSSR_P(dev->port) & SSSR_TNF)) { + while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_TNF)) { if (!--timeout) return -ETIMEDOUT; cpu_relax(); } - SSDR_P(dev->port) = data; + __raw_writel(data, ssp->mmio_base + SSDR); return 0; } @@ -129,15 +112,16 @@ int ssp_write_word(struct ssp_dev *dev, u32 data) */ int ssp_read_word(struct ssp_dev *dev, u32 *data) { + struct ssp_device *ssp = dev->ssp; int timeout = TIMEOUT; - while (!(SSSR_P(dev->port) & SSSR_RNE)) { + while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE)) { if (!--timeout) return -ETIMEDOUT; cpu_relax(); } - *data = SSDR_P(dev->port); + *data = __raw_readl(ssp->mmio_base + SSDR); return 0; } @@ -151,17 +135,28 @@ int ssp_read_word(struct ssp_dev *dev, u32 *data) */ int ssp_flush(struct ssp_dev *dev) { + struct ssp_device *ssp = dev->ssp; int timeout = TIMEOUT * 2; + /* ensure TX FIFO is empty instead of not full */ + if (cpu_is_pxa3xx()) { + while (__raw_readl(ssp->mmio_base + SSSR) & 0xf00) { + if (!--timeout) + return -ETIMEDOUT; + cpu_relax(); + } + timeout = TIMEOUT * 2; + } + do { - while (SSSR_P(dev->port) & SSSR_RNE) { + while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE) { if (!--timeout) return -ETIMEDOUT; - (void) SSDR_P(dev->port); + (void)__raw_readl(ssp->mmio_base + SSDR); } if (!--timeout) return -ETIMEDOUT; - } while (SSSR_P(dev->port) & SSSR_BSY); + } while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_BSY); return 0; } @@ -173,7 +168,12 @@ int ssp_flush(struct ssp_dev *dev) */ void ssp_enable(struct ssp_dev *dev) { - SSCR0_P(dev->port) |= SSCR0_SSE; + struct ssp_device *ssp = dev->ssp; + uint32_t sscr0; + + sscr0 = __raw_readl(ssp->mmio_base + SSCR0); + sscr0 |= SSCR0_SSE; + __raw_writel(sscr0, ssp->mmio_base + SSCR0); } /** @@ -183,7 +183,12 @@ void ssp_enable(struct ssp_dev *dev) */ void ssp_disable(struct ssp_dev *dev) { - SSCR0_P(dev->port) &= ~SSCR0_SSE; + struct ssp_device *ssp = dev->ssp; + uint32_t sscr0; + + sscr0 = __raw_readl(ssp->mmio_base + SSCR0); + sscr0 &= ~SSCR0_SSE; + __raw_writel(sscr0, ssp->mmio_base + SSCR0); } /** @@ -192,14 +197,16 @@ void ssp_disable(struct ssp_dev *dev) * * Save the configured SSP state for suspend. */ -void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp) +void ssp_save_state(struct ssp_dev *dev, struct ssp_state *state) { - ssp->cr0 = SSCR0_P(dev->port); - ssp->cr1 = SSCR1_P(dev->port); - ssp->to = SSTO_P(dev->port); - ssp->psp = SSPSP_P(dev->port); + struct ssp_device *ssp = dev->ssp; + + state->cr0 = __raw_readl(ssp->mmio_base + SSCR0); + state->cr1 = __raw_readl(ssp->mmio_base + SSCR1); + state->to = __raw_readl(ssp->mmio_base + SSTO); + state->psp = __raw_readl(ssp->mmio_base + SSPSP); - SSCR0_P(dev->port) &= ~SSCR0_SSE; + ssp_disable(dev); } /** @@ -208,16 +215,18 @@ void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp) * * Restore the SSP configuration saved previously by ssp_save_state. */ -void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp) +void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *state) { - SSSR_P(dev->port) = SSSR_ROR | SSSR_TUR | SSSR_BCE; + struct ssp_device *ssp = dev->ssp; + uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE; - SSCR0_P(dev->port) = ssp->cr0 & ~SSCR0_SSE; - SSCR1_P(dev->port) = ssp->cr1; - SSTO_P(dev->port) = ssp->to; - SSPSP_P(dev->port) = ssp->psp; + __raw_writel(sssr, ssp->mmio_base + SSSR); - SSCR0_P(dev->port) = ssp->cr0; + __raw_writel(state->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0); + __raw_writel(state->cr1, ssp->mmio_base + SSCR1); + __raw_writel(state->to, ssp->mmio_base + SSTO); + __raw_writel(state->psp, ssp->mmio_base + SSPSP); + __raw_writel(state->cr0, ssp->mmio_base + SSCR0); } /** @@ -231,15 +240,17 @@ void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp) */ int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed) { + struct ssp_device *ssp = dev->ssp; + dev->mode = mode; dev->flags = flags; dev->psp_flags = psp_flags; dev->speed = speed; /* set up port type, speed, port settings */ - SSCR0_P(dev->port) = (dev->speed | dev->mode); - SSCR1_P(dev->port) = dev->flags; - SSPSP_P(dev->port) = dev->psp_flags; + __raw_writel((dev->speed | dev->mode), ssp->mmio_base + SSCR0); + __raw_writel(dev->flags, ssp->mmio_base + SSCR1); + __raw_writel(dev->psp_flags, ssp->mmio_base + SSPSP); return 0; } @@ -256,44 +267,32 @@ int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 spee */ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags) { + struct ssp_device *ssp; int ret; - if (port > PXA_SSP_PORTS || port == 0) + ssp = ssp_request(port, "SSP"); + if (ssp == NULL) return -ENODEV; - mutex_lock(&mutex); - if (use_count[port - 1]) { - mutex_unlock(&mutex); - return -EBUSY; - } - use_count[port - 1]++; - - if (!request_mem_region(__PREG(SSCR0_P(port)), 0x2c, "SSP")) { - use_count[port - 1]--; - mutex_unlock(&mutex); - return -EBUSY; - } + dev->ssp = ssp; dev->port = port; /* do we need to get irq */ if (!(init_flags & SSP_NO_IRQ)) { - ret = request_irq(ssp_info[port-1].irq, ssp_interrupt, + ret = request_irq(ssp->irq, ssp_interrupt, 0, "SSP", dev); if (ret) goto out_region; - dev->irq = ssp_info[port-1].irq; + dev->irq = ssp->irq; } else dev->irq = 0; /* turn on SSP port clock */ - pxa_set_cken(ssp_info[port-1].clock, 1); - mutex_unlock(&mutex); + clk_enable(ssp->clk); return 0; out_region: - release_mem_region(__PREG(SSCR0_P(port)), 0x2c); - use_count[port - 1]--; - mutex_unlock(&mutex); + ssp_free(ssp); return ret; } @@ -304,23 +303,240 @@ out_region: */ void ssp_exit(struct ssp_dev *dev) { - mutex_lock(&mutex); - SSCR0_P(dev->port) &= ~SSCR0_SSE; + struct ssp_device *ssp = dev->ssp; + + ssp_disable(dev); + free_irq(dev->irq, dev); + clk_disable(ssp->clk); + ssp_free(ssp); +} + +static DEFINE_MUTEX(ssp_lock); +static LIST_HEAD(ssp_list); + +struct ssp_device *ssp_request(int port, const char *label) +{ + struct ssp_device *ssp = NULL; + + mutex_lock(&ssp_lock); + + list_for_each_entry(ssp, &ssp_list, node) { + if (ssp->port_id == port && ssp->use_count == 0) { + ssp->use_count++; + ssp->label = label; + break; + } + } + + mutex_unlock(&ssp_lock); + + if (ssp->port_id != port) + return NULL; + + return ssp; +} +EXPORT_SYMBOL(ssp_request); + +void ssp_free(struct ssp_device *ssp) +{ + mutex_lock(&ssp_lock); + if (ssp->use_count) { + ssp->use_count--; + ssp->label = NULL; + } else + dev_err(&ssp->pdev->dev, "device already free\n"); + mutex_unlock(&ssp_lock); +} +EXPORT_SYMBOL(ssp_free); + +static int __devinit ssp_probe(struct platform_device *pdev, int type) +{ + struct resource *res; + struct ssp_device *ssp; + int ret = 0; + + ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL); + if (ssp == NULL) { + dev_err(&pdev->dev, "failed to allocate memory"); + return -ENOMEM; + } + + ssp->clk = clk_get(&pdev->dev, "SSPCLK"); + if (IS_ERR(ssp->clk)) { + ret = PTR_ERR(ssp->clk); + goto err_free; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + + res = request_mem_region(res->start, res->end - res->start + 1, + pdev->name); + if (res == NULL) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + ret = -EBUSY; + goto err_free_clk; + } + + ssp->phys_base = res->start; + + ssp->mmio_base = ioremap(res->start, res->end - res->start + 1); + if (ssp->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + ret = -ENODEV; + goto err_free_mem; + } + + ssp->irq = platform_get_irq(pdev, 0); + if (ssp->irq < 0) { + dev_err(&pdev->dev, "no IRQ resource defined\n"); + ret = -ENODEV; + goto err_free_io; + } + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no SSP RX DRCMR defined\n"); + ret = -ENODEV; + goto err_free_io; + } + ssp->drcmr_rx = res->start; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (res == NULL) { + dev_err(&pdev->dev, "no SSP TX DRCMR defined\n"); + ret = -ENODEV; + goto err_free_io; + } + ssp->drcmr_tx = res->start; + + /* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id + * starts from 0, do a translation here + */ + ssp->port_id = pdev->id + 1; + ssp->use_count = 0; + ssp->type = type; + + mutex_lock(&ssp_lock); + list_add(&ssp->node, &ssp_list); + mutex_unlock(&ssp_lock); + + platform_set_drvdata(pdev, ssp); + return 0; + +err_free_io: + iounmap(ssp->mmio_base); +err_free_mem: + release_mem_region(res->start, res->end - res->start + 1); +err_free_clk: + clk_put(ssp->clk); +err_free: + kfree(ssp); + return ret; +} + +static int __devexit ssp_remove(struct platform_device *pdev) +{ + struct resource *res; + struct ssp_device *ssp; + + ssp = platform_get_drvdata(pdev); + if (ssp == NULL) + return -ENODEV; + + iounmap(ssp->mmio_base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, res->end - res->start + 1); + + clk_put(ssp->clk); - if (dev->port > PXA_SSP_PORTS || dev->port == 0) { - printk(KERN_WARNING "SSP: tried to close invalid port\n"); - mutex_unlock(&mutex); - return; + mutex_lock(&ssp_lock); + list_del(&ssp->node); + mutex_unlock(&ssp_lock); + + kfree(ssp); + return 0; +} + +static int __devinit pxa25x_ssp_probe(struct platform_device *pdev) +{ + return ssp_probe(pdev, PXA25x_SSP); +} + +static int __devinit pxa25x_nssp_probe(struct platform_device *pdev) +{ + return ssp_probe(pdev, PXA25x_NSSP); +} + +static int __devinit pxa27x_ssp_probe(struct platform_device *pdev) +{ + return ssp_probe(pdev, PXA27x_SSP); +} + +static struct platform_driver pxa25x_ssp_driver = { + .driver = { + .name = "pxa25x-ssp", + }, + .probe = pxa25x_ssp_probe, + .remove = __devexit_p(ssp_remove), +}; + +static struct platform_driver pxa25x_nssp_driver = { + .driver = { + .name = "pxa25x-nssp", + }, + .probe = pxa25x_nssp_probe, + .remove = __devexit_p(ssp_remove), +}; + +static struct platform_driver pxa27x_ssp_driver = { + .driver = { + .name = "pxa27x-ssp", + }, + .probe = pxa27x_ssp_probe, + .remove = __devexit_p(ssp_remove), +}; + +static int __init pxa_ssp_init(void) +{ + int ret = 0; + + ret = platform_driver_register(&pxa25x_ssp_driver); + if (ret) { + printk(KERN_ERR "failed to register pxa25x_ssp_driver"); + return ret; + } + + ret = platform_driver_register(&pxa25x_nssp_driver); + if (ret) { + printk(KERN_ERR "failed to register pxa25x_nssp_driver"); + return ret; + } + + ret = platform_driver_register(&pxa27x_ssp_driver); + if (ret) { + printk(KERN_ERR "failed to register pxa27x_ssp_driver"); + return ret; } - pxa_set_cken(ssp_info[dev->port-1].clock, 0); - if (dev->irq) - free_irq(dev->irq, dev); - release_mem_region(__PREG(SSCR0_P(dev->port)), 0x2c); - use_count[dev->port - 1]--; - mutex_unlock(&mutex); + return ret; +} + +static void __exit pxa_ssp_exit(void) +{ + platform_driver_unregister(&pxa25x_ssp_driver); + platform_driver_unregister(&pxa25x_nssp_driver); + platform_driver_unregister(&pxa27x_ssp_driver); } +arch_initcall(pxa_ssp_init); +module_exit(pxa_ssp_exit); + EXPORT_SYMBOL(ssp_write_word); EXPORT_SYMBOL(ssp_read_word); EXPORT_SYMBOL(ssp_flush); diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index d774430d02c0..167412e6bec8 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -17,6 +17,7 @@ .text +#ifdef CONFIG_PXA27x ENTRY(pxa_cpu_standby) ldr r0, =PSSR mov r1, #(PSSR_PH | PSSR_STS) @@ -29,3 +30,85 @@ ENTRY(pxa_cpu_standby) 1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby str r1, [r0] @ make sure PSSR_PH/STS are clear mov pc, lr + +#endif + +#ifdef CONFIG_PXA3xx + +#define MDCNFG 0x0000 +#define MDCNFG_DMCEN (1 << 30) +#define DDR_HCAL 0x0060 +#define DDR_HCAL_HCRNG 0x1f +#define DDR_HCAL_HCPROG (1 << 28) +#define DDR_HCAL_HCEN (1 << 31) +#define DMCIER 0x0070 +#define DMCIER_EDLP (1 << 29) +#define DMCISR 0x0078 +#define RCOMP 0x0100 +#define RCOMP_SWEVAL (1 << 31) + +ENTRY(pm_enter_standby_start) + mov r1, #0xf6000000 @ DMEMC_REG_BASE (MDCNFG) + add r1, r1, #0x00100000 + + /* + * Preload the TLB entry for accessing the dynamic memory + * controller registers. Note that page table lookups will + * fail until the dynamic memory controller has been + * reinitialised - and that includes MMU page table walks. + * This also means that only the dynamic memory controller + * can be reliably accessed in the code following standby. + */ + ldr r2, [r1] @ Dummy read MDCNFG + + mcr p14, 0, r0, c7, c0, 0 + .rept 8 + nop + .endr + + ldr r0, [r1, #DDR_HCAL] @ Clear (and wait for) HCEN + bic r0, r0, #DDR_HCAL_HCEN + str r0, [r1, #DDR_HCAL] +1: ldr r0, [r1, #DDR_HCAL] + tst r0, #DDR_HCAL_HCEN + bne 1b + + ldr r0, [r1, #RCOMP] @ Initiate RCOMP + orr r0, r0, #RCOMP_SWEVAL + str r0, [r1, #RCOMP] + + mov r0, #~0 @ Clear interrupts + str r0, [r1, #DMCISR] + + ldr r0, [r1, #DMCIER] @ set DMIER[EDLP] + orr r0, r0, #DMCIER_EDLP + str r0, [r1, #DMCIER] + + ldr r0, [r1, #DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN + bic r0, r0, #DDR_HCAL_HCRNG + orr r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG + str r0, [r1, #DDR_HCAL] + +1: ldr r0, [r1, #DMCISR] + tst r0, #DMCIER_EDLP + beq 1b + + ldr r0, [r1, #MDCNFG] @ set MDCNFG[DMCEN] + orr r0, r0, #MDCNFG_DMCEN + str r0, [r1, #MDCNFG] +1: ldr r0, [r1, #MDCNFG] + tst r0, #MDCNFG_DMCEN + beq 1b + + ldr r0, [r1, #DDR_HCAL] @ set DDR_HCAL[HCRNG] + orr r0, r0, #2 @ HCRNG + str r0, [r1, #DDR_HCAL] + + ldr r0, [r1, #DMCIER] @ Clear the interrupt + bic r0, r0, #0x20000000 + str r0, [r1, #DMCIER] + + mov pc, lr +ENTRY(pm_enter_standby_end) + +#endif diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index fbfa1920353d..7b7c0179795b 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -59,55 +59,17 @@ unsigned long long sched_clock(void) } +#define MIN_OSCR_DELTA 16 + static irqreturn_t pxa_ost0_interrupt(int irq, void *dev_id) { - int next_match; struct clock_event_device *c = dev_id; - if (c->mode == CLOCK_EVT_MODE_ONESHOT) { - /* Disarm the compare/match, signal the event. */ - OIER &= ~OIER_E0; - OSSR = OSSR_M0; - c->event_handler(c); - } else if (c->mode == CLOCK_EVT_MODE_PERIODIC) { - /* Call the event handler as many times as necessary - * to recover missed events, if any (if we update - * OSMR0 and OSCR0 is still ahead of us, we've missed - * the event). As we're dealing with that, re-arm the - * compare/match for the next event. - * - * HACK ALERT: - * - * There's a latency between the instruction that - * writes to OSMR0 and the actual commit to the - * physical hardware, because the CPU doesn't (have - * to) run at bus speed, there's a write buffer - * between the CPU and the bus, etc. etc. So if the - * target OSCR0 is "very close", to the OSMR0 load - * value, the update to OSMR0 might not get to the - * hardware in time and we'll miss that interrupt. - * - * To be safe, if the new OSMR0 is "very close" to the - * target OSCR0 value, we call the event_handler as - * though the event actually happened. According to - * Nico's comment in the previous version of this - * code, experience has shown that 6 OSCR ticks is - * "very close" but he went with 8. We will use 16, - * based on the results of testing on PXA270. - * - * To be doubly sure, we also tell clkevt via - * clockevents_register_device() not to ask for - * anything that might put us "very close". - */ -#define MIN_OSCR_DELTA 16 - do { - OSSR = OSSR_M0; - next_match = (OSMR0 += LATCH); - c->event_handler(c); - } while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA) - && (c->mode == CLOCK_EVT_MODE_PERIODIC)); - } + /* Disarm the compare/match, signal the event. */ + OIER &= ~OIER_E0; + OSSR = OSSR_M0; + c->event_handler(c); return IRQ_HANDLED; } @@ -133,14 +95,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) unsigned long irqflags; switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - raw_local_irq_save(irqflags); - OSSR = OSSR_M0; - OIER |= OIER_E0; - OSMR0 = OSCR + LATCH; - raw_local_irq_restore(irqflags); - break; - case CLOCK_EVT_MODE_ONESHOT: raw_local_irq_save(irqflags); OIER &= ~OIER_E0; @@ -158,13 +112,14 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) break; case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_PERIODIC: break; } } static struct clock_event_device ckevt_pxa_osmr0 = { .name = "osmr0", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .features = CLOCK_EVT_FEAT_ONESHOT, .shift = 32, .rating = 200, .cpumask = CPU_MASK_CPU0, @@ -214,7 +169,7 @@ static void __init pxa_timer_init(void) ckevt_pxa_osmr0.max_delta_ns = clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0); ckevt_pxa_osmr0.min_delta_ns = - clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1; + clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1; cksrc_pxa_oscr0.mult = clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift); @@ -226,7 +181,7 @@ static void __init pxa_timer_init(void) } #ifdef CONFIG_PM -static unsigned long osmr[4], oier; +static unsigned long osmr[4], oier, oscr; static void pxa_timer_suspend(void) { @@ -235,23 +190,26 @@ static void pxa_timer_suspend(void) osmr[2] = OSMR2; osmr[3] = OSMR3; oier = OIER; + oscr = OSCR; } static void pxa_timer_resume(void) { + /* + * Ensure that we have at least MIN_OSCR_DELTA between match + * register 0 and the OSCR, to guarantee that we will receive + * the one-shot timer interrupt. We adjust OSMR0 in preference + * to OSCR to guarantee that OSCR is monotonically incrementing. + */ + if (osmr[0] - oscr < MIN_OSCR_DELTA) + osmr[0] += MIN_OSCR_DELTA; + OSMR0 = osmr[0]; OSMR1 = osmr[1]; OSMR2 = osmr[2]; OSMR3 = osmr[3]; OIER = oier; - - /* - * OSCR0 is the system timer, which has to increase - * monotonically until it rolls over in hardware. The value - * (OSMR0 - LATCH) is OSCR0 at the most recent system tick, - * which is a handy value to restore to OSCR0. - */ - OSCR = OSMR0 - LATCH; + OSCR = oscr; } #else #define pxa_timer_suspend NULL diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 240fd042083d..1919756900f4 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -184,16 +184,13 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); - err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, IRQF_DISABLED, + err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, + IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC/SD card detect", data); - if (err) { + if (err) printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - return -1; - } - - set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); - return 0; + return err; } static void tosa_mci_setpower(struct device *dev, unsigned int vdd) diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index e4ba43bdf85d..853fc9433750 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -296,11 +296,10 @@ static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, v err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING, "MMC card detect", data); - if (err) { + if (err) printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); - return -1; - } - return 0; + + return err; } static void trizeps4_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 743a87b2faa1..7731d50dd86c 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -25,9 +25,13 @@ #include <asm/arch/gpio.h> #include <asm/arch/pxafb.h> #include <asm/arch/zylonite.h> +#include <asm/arch/mmc.h> #include "generic.h" +#define MAX_SLOTS 3 +struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS]; + int gpio_backlight; int gpio_eth_irq; @@ -43,7 +47,7 @@ static struct resource smc91x_resources[] = { [1] = { .start = -1, /* for run-time assignment */ .end = -1, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; @@ -156,6 +160,95 @@ static void __init zylonite_init_lcd(void) static inline void zylonite_init_lcd(void) {} #endif +#if defined(CONFIG_MMC) +static int zylonite_mci_ro(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + + return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp); +} + +static int zylonite_mci_init(struct device *dev, + irq_handler_t zylonite_detect_int, + void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + int err, cd_irq, gpio_cd, gpio_wp; + + cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); + gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; + gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; + + /* + * setup GPIO for Zylonite MMC controller + */ + err = gpio_request(gpio_cd, "mmc card detect"); + if (err) + goto err_request_cd; + gpio_direction_input(gpio_cd); + + err = gpio_request(gpio_wp, "mmc write protect"); + if (err) + goto err_request_wp; + gpio_direction_input(gpio_wp); + + err = request_irq(cd_irq, zylonite_detect_int, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: MMC/SD/SDIO: " + "can't request card detect IRQ\n", __func__); + goto err_request_irq; + } + + return 0; + +err_request_irq: + gpio_free(gpio_wp); +err_request_wp: + gpio_free(gpio_cd); +err_request_cd: + return err; +} + +static void zylonite_mci_exit(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + int cd_irq, gpio_cd, gpio_wp; + + cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd); + gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd; + gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp; + + free_irq(cd_irq, data); + gpio_free(gpio_cd); + gpio_free(gpio_wp); +} + +static struct pxamci_platform_data zylonite_mci_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = zylonite_mci_init, + .exit = zylonite_mci_exit, + .get_ro = zylonite_mci_ro, +}; + +static struct pxamci_platform_data zylonite_mci2_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, +}; + +static void __init zylonite_init_mmc(void) +{ + pxa_set_mci_info(&zylonite_mci_platform_data); + pxa3xx_set_mci2_info(&zylonite_mci2_platform_data); + if (cpu_is_pxa310()) + pxa3xx_set_mci3_info(&zylonite_mci_platform_data); +} +#else +static inline void zylonite_init_mmc(void) {} +#endif + static void __init zylonite_init(void) { /* board-processor specific initialization */ @@ -171,6 +264,7 @@ static void __init zylonite_init(void) platform_device_register(&smc91x_device); zylonite_init_lcd(); + zylonite_init_mmc(); } MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 1832bc316501..6ac04c09b0e9 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -53,13 +53,13 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { /* BTUART */ GPIO111_UART2_RTS, - GPIO112_UART2_RXD, + GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL, GPIO113_UART2_TXD, - GPIO114_UART2_CTS, + GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH, /* STUART */ GPIO109_UART3_TXD, - GPIO110_UART3_RXD, + GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL, /* AC97 */ GPIO23_AC97_nACRESET, @@ -70,16 +70,16 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO28_AC97_SYNC, /* Keypad */ - GPIO107_KP_DKIN_0, - GPIO108_KP_DKIN_1, - GPIO115_KP_MKIN_0, - GPIO116_KP_MKIN_1, - GPIO117_KP_MKIN_2, - GPIO118_KP_MKIN_3, - GPIO119_KP_MKIN_4, - GPIO120_KP_MKIN_5, - GPIO2_2_KP_MKIN_6, - GPIO3_2_KP_MKIN_7, + GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH, + GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH, + GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH, + GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH, + GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH, + GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH, + GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH, + GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH, + GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH, + GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH, GPIO121_KP_MKOUT_0, GPIO122_KP_MKOUT_1, GPIO123_KP_MKOUT_2, @@ -88,16 +88,33 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO4_2_KP_MKOUT_5, GPIO5_2_KP_MKOUT_6, GPIO6_2_KP_MKOUT_7, + + /* MMC1 */ + GPIO3_MMC1_DAT0, + GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH, + GPIO5_MMC1_DAT2, + GPIO6_MMC1_DAT3, + GPIO7_MMC1_CLK, + GPIO8_MMC1_CMD, /* CMD0 for slot 0 */ + GPIO15_GPIO, /* CMD1 default as GPIO for slot 0 */ + + /* MMC2 */ + GPIO9_MMC2_DAT0, + GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH, + GPIO11_MMC2_DAT2, + GPIO12_MMC2_DAT3, + GPIO13_MMC2_CLK, + GPIO14_MMC2_CMD, }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { /* FFUART */ - GPIO30_UART1_RXD, + GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL, GPIO31_UART1_TXD, GPIO32_UART1_CTS, GPIO37_UART1_RTS, GPIO33_UART1_DCD, - GPIO34_UART1_DSR, + GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL, GPIO35_UART1_RI, GPIO36_UART1_DTR, @@ -108,7 +125,7 @@ static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { static mfp_cfg_t pxa310_mfp_cfg[] __initdata = { /* FFUART */ - GPIO99_UART1_RXD, + GPIO99_UART1_RXD | MFP_LPM_EDGE_FALL, GPIO100_UART1_TXD, GPIO101_UART1_CTS, GPIO106_UART1_RTS, @@ -116,6 +133,14 @@ static mfp_cfg_t pxa310_mfp_cfg[] __initdata = { /* Ethernet */ GPIO2_nCS3, GPIO102_GPIO, + + /* MMC3 */ + GPIO7_2_MMC3_DAT0, + GPIO8_2_MMC3_DAT1 | MFP_LPM_EDGE_BOTH, + GPIO9_2_MMC3_DAT2, + GPIO10_2_MMC3_DAT3, + GPIO103_MMC3_CLK, + GPIO105_MMC3_CMD, }; #define NUM_LCD_DETECT_PINS 7 @@ -174,6 +199,10 @@ void __init zylonite_pxa300_init(void) /* GPIO pin assignment */ gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20); + + /* MMC card detect & write protect for controller 0 */ + zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0); + zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2); } if (cpu_is_pxa300()) { @@ -184,5 +213,9 @@ void __init zylonite_pxa300_init(void) if (cpu_is_pxa310()) { pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg)); gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102); + + /* MMC card detect & write protect for controller 2 */ + zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30); + zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31); } } diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 94c715808b59..dfa79992b8ab 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -51,11 +51,11 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO17_2_LCD_BIAS, /* FFUART */ - GPIO41_UART1_RXD, + GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL, GPIO42_UART1_TXD, GPIO43_UART1_CTS, GPIO44_UART1_DCD, - GPIO45_UART1_DSR, + GPIO45_UART1_DSR | MFP_LPM_EDGE_FALL, GPIO46_UART1_RI, GPIO47_UART1_DTR, GPIO48_UART1_RTS, @@ -73,16 +73,16 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO33_I2C_SDA, /* Keypad */ - GPIO105_KP_DKIN_0, - GPIO106_KP_DKIN_1, - GPIO113_KP_MKIN_0, - GPIO114_KP_MKIN_1, - GPIO115_KP_MKIN_2, - GPIO116_KP_MKIN_3, - GPIO117_KP_MKIN_4, - GPIO118_KP_MKIN_5, - GPIO119_KP_MKIN_6, - GPIO120_KP_MKIN_7, + GPIO105_KP_DKIN_0 | MFP_LPM_EDGE_BOTH, + GPIO106_KP_DKIN_1 | MFP_LPM_EDGE_BOTH, + GPIO113_KP_MKIN_0 | MFP_LPM_EDGE_BOTH, + GPIO114_KP_MKIN_1 | MFP_LPM_EDGE_BOTH, + GPIO115_KP_MKIN_2 | MFP_LPM_EDGE_BOTH, + GPIO116_KP_MKIN_3 | MFP_LPM_EDGE_BOTH, + GPIO117_KP_MKIN_4 | MFP_LPM_EDGE_BOTH, + GPIO118_KP_MKIN_5 | MFP_LPM_EDGE_BOTH, + GPIO119_KP_MKIN_6 | MFP_LPM_EDGE_BOTH, + GPIO120_KP_MKIN_7 | MFP_LPM_EDGE_BOTH, GPIO121_KP_MKOUT_0, GPIO122_KP_MKOUT_1, GPIO123_KP_MKOUT_2, @@ -95,6 +95,23 @@ static mfp_cfg_t mfp_cfg[] __initdata = { /* Ethernet */ GPIO4_nCS3, GPIO90_GPIO, + + /* MMC1 */ + GPIO18_MMC1_DAT0, + GPIO19_MMC1_DAT1 | MFP_LPM_EDGE_BOTH, + GPIO20_MMC1_DAT2, + GPIO21_MMC1_DAT3, + GPIO22_MMC1_CLK, + GPIO23_MMC1_CMD,/* CMD0 for slot 0 */ + GPIO31_GPIO, /* CMD1 default as GPIO for slot 0 */ + + /* MMC2 */ + GPIO24_MMC2_DAT0, + GPIO25_MMC2_DAT1 | MFP_LPM_EDGE_BOTH, + GPIO26_MMC2_DAT2, + GPIO27_MMC2_DAT3, + GPIO28_MMC2_CLK, + GPIO29_MMC2_CMD, }; #define NUM_LCD_DETECT_PINS 7 @@ -169,5 +186,9 @@ void __init zylonite_pxa320_init(void) /* GPIO pin assignment */ gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO14); gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO9); + + /* MMC card detect & write protect for controller 0 */ + zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1); + zylonite_mmc_slot[0].gpio_wp = mfp_to_gpio(MFP_PIN_GPIO5); } } diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 83a5f8b91857..f455233af082 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -29,7 +29,7 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c index b1b2e07bf080..99d92f5c93d6 100644 --- a/drivers/input/touchscreen/corgi_ts.c +++ b/drivers/input/touchscreen/corgi_ts.c @@ -74,10 +74,10 @@ extern unsigned int get_clk_frequency_khz(int info); static unsigned long calc_waittime(struct corgi_ts *corgi_ts) { - unsigned long hsync_len = corgi_ts->machinfo->get_hsync_len(); + unsigned long hsync_invperiod = corgi_ts->machinfo->get_hsync_invperiod(); - if (hsync_len) - return get_clk_frequency_khz(0)*1000/hsync_len; + if (hsync_invperiod) + return get_clk_frequency_khz(0)*1000/hsync_invperiod; else return 0; } @@ -114,7 +114,7 @@ static int sync_receive_data_send_cmd(struct corgi_ts *corgi_ts, int doRecive, i if (timer2-timer1 > wait_time) { /* too slow - timeout, try again */ corgi_ts->machinfo->wait_hsync(); - /* get OSCR */ + /* get CCNT */ CCNT(timer1); /* Wait after HSync */ CCNT(timer2); diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 1654a3330340..1ea8482037bb 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -65,6 +65,8 @@ struct pxamci_host { unsigned int dma_len; unsigned int dma_dir; + unsigned int dma_drcmrrx; + unsigned int dma_drcmrtx; }; static void pxamci_stop_clock(struct pxamci_host *host) @@ -131,13 +133,13 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) if (data->flags & MMC_DATA_READ) { host->dma_dir = DMA_FROM_DEVICE; dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG; - DRCMRTXMMC = 0; - DRCMRRXMMC = host->dma | DRCMR_MAPVLD; + DRCMR(host->dma_drcmrtx) = 0; + DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD; } else { host->dma_dir = DMA_TO_DEVICE; dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC; - DRCMRRXMMC = 0; - DRCMRTXMMC = host->dma | DRCMR_MAPVLD; + DRCMR(host->dma_drcmrrx) = 0; + DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD; } dcmd |= DCMD_BURST32 | DCMD_WIDTH1; @@ -375,14 +377,23 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->clkrt == CLKRT_OFF) clk_enable(host->clk); - /* - * clk might result in a lower divisor than we - * desire. check for that condition and adjust - * as appropriate. - */ - if (rate / clk > ios->clock) - clk <<= 1; - host->clkrt = fls(clk) - 1; + if (ios->clock == 26000000) { + /* to support 26MHz on pxa300/pxa310 */ + host->clkrt = 7; + } else { + /* to handle (19.5MHz, 26MHz) */ + if (!clk) + clk = 1; + + /* + * clk might result in a lower divisor than we + * desire. check for that condition and adjust + * as appropriate. + */ + if (rate / clk > ios->clock) + clk <<= 1; + host->clkrt = fls(clk) - 1; + } /* * we write clkrt on the next command @@ -459,7 +470,7 @@ static int pxamci_probe(struct platform_device *pdev) { struct mmc_host *mmc; struct pxamci_host *host = NULL; - struct resource *r; + struct resource *r, *dmarx, *dmatx; int ret, irq; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -519,7 +530,8 @@ static int pxamci_probe(struct platform_device *pdev) * Calculate minimum clock rate, rounding up. */ mmc->f_min = (host->clkrate + 63) / 64; - mmc->f_max = host->clkrate; + mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000 + : host->clkrate; mmc->ocr_avail = host->pdata ? host->pdata->ocr_mask : @@ -529,6 +541,9 @@ static int pxamci_probe(struct platform_device *pdev) if (!cpu_is_pxa21x() && !cpu_is_pxa25x()) { mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; host->cmdat |= CMDAT_SDIO_INT_EN; + if (cpu_is_pxa300() || cpu_is_pxa310()) + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_SD_HIGHSPEED; } host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL); @@ -570,6 +585,20 @@ static int pxamci_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mmc); + dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!dmarx) { + ret = -ENXIO; + goto out; + } + host->dma_drcmrrx = dmarx->start; + + dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (!dmatx) { + ret = -ENXIO; + goto out; + } + host->dma_drcmrtx = dmatx->start; + if (host->pdata && host->pdata->init) host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc); @@ -613,8 +642,8 @@ static int pxamci_remove(struct platform_device *pdev) END_CMD_RES|PRG_DONE|DATA_TRAN_DONE, host->base + MMC_I_MASK); - DRCMRRXMMC = 0; - DRCMRTXMMC = 0; + DRCMR(host->dma_drcmrrx) = 0; + DRCMR(host->dma_drcmrtx) = 0; free_irq(host->irq, host); pxa_free_dma(host->dma); diff --git a/drivers/mmc/host/pxamci.h b/drivers/mmc/host/pxamci.h index 748c7706f237..f6c2e2fcce37 100644 --- a/drivers/mmc/host/pxamci.h +++ b/drivers/mmc/host/pxamci.h @@ -68,7 +68,7 @@ #define PRG_DONE (1 << 1) #define DATA_TRAN_DONE (1 << 0) -#ifdef CONFIG_PXA27x +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #define MMC_I_MASK_ALL 0x00001fff #else #define MMC_I_MASK_ALL 0x0000007f diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 3286d2a0a870..6a20a5491a96 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -66,6 +66,7 @@ #include <linux/dm9000.h> #include <linux/delay.h> #include <linux/platform_device.h> +#include <linux/irq.h> #include <asm/delay.h> #include <asm/irq.h> @@ -113,7 +114,7 @@ #define writesl outsl #define DM9000_IRQ_FLAGS (IRQF_SHARED | IRQF_TRIGGER_HIGH) #else -#define DM9000_IRQ_FLAGS IRQF_SHARED +#define DM9000_IRQ_FLAGS (IRQF_SHARED | IRQT_RISING) #endif /* diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 7da7589d45dd..4020e9e955b3 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1775,7 +1775,8 @@ static int __init smc_findirq(void __iomem *ioaddr) * o actually GRAB the irq. * o GRAB the region */ -static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr) +static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr, + unsigned long irq_flags) { struct smc_local *lp = netdev_priv(dev); static int version_printed = 0; @@ -1941,7 +1942,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr) } /* Grab the IRQ */ - retval = request_irq(dev->irq, &smc_interrupt, SMC_IRQ_FLAGS, dev->name, dev); + retval = request_irq(dev->irq, &smc_interrupt, irq_flags, dev->name, dev); if (retval) goto err_out; @@ -2123,8 +2124,9 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * static int smc_drv_probe(struct platform_device *pdev) { struct net_device *ndev; - struct resource *res; + struct resource *res, *ires; unsigned int __iomem *addr; + unsigned long irq_flags = SMC_IRQ_FLAGS; int ret; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs"); @@ -2150,12 +2152,17 @@ static int smc_drv_probe(struct platform_device *pdev) SET_NETDEV_DEV(ndev, &pdev->dev); ndev->dma = (unsigned char)-1; - ndev->irq = platform_get_irq(pdev, 0); - if (ndev->irq < 0) { + + ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!ires) { ret = -ENODEV; goto out_free_netdev; } + ndev->irq = ires->start; + if (SMC_IRQ_FLAGS == -1) + irq_flags = ires->flags & IRQF_TRIGGER_MASK; + ret = smc_request_attrib(pdev); if (ret) goto out_free_netdev; @@ -2181,7 +2188,7 @@ static int smc_drv_probe(struct platform_device *pdev) #endif platform_set_drvdata(pdev, ndev); - ret = smc_probe(ndev, addr); + ret = smc_probe(ndev, addr, irq_flags); if (ret != 0) goto out_iounmap; diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 07b7f7120e37..271c28dc9baa 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -54,6 +54,7 @@ #define SMC_outw(v, a, r) writew(v, (a) + (r)) #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) +#define SMC_IRQ_FLAGS (-1) /* from resource */ #elif defined(CONFIG_BLACKFIN) @@ -158,7 +159,7 @@ #define SMC_outw(v, a, r) writew(v, (a) + (r)) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) -#define SMC_IRQ_FLAGS (0) +#define SMC_IRQ_FLAGS (-1) #elif defined(CONFIG_SA1100_ASSABET) @@ -177,6 +178,7 @@ #define SMC_outb(v, a, r) writeb(v, (a) + (r)) #define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l)) #define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) +#define SMC_IRQ_FLAGS (-1) /* from resource */ #elif defined(CONFIG_MACH_LOGICPD_PXA270) @@ -194,7 +196,8 @@ #elif defined(CONFIG_ARCH_INNOKOM) || \ defined(CONFIG_MACH_MAINSTONE) || \ defined(CONFIG_ARCH_PXA_IDP) || \ - defined(CONFIG_ARCH_RAMSES) + defined(CONFIG_ARCH_RAMSES) || \ + defined(CONFIG_ARCH_PCM027) #define SMC_CAN_USE_8BIT 1 #define SMC_CAN_USE_16BIT 1 @@ -210,6 +213,7 @@ #define SMC_outl(v, a, r) writel(v, (a) + (r)) #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) +#define SMC_IRQ_FLAGS (-1) /* from resource */ /* We actually can't write halfwords properly if not word aligned */ static inline void @@ -238,6 +242,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) #define SMC_outb(v, a, r) writeb(v, (a) + (r)) #define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_IRQ_FLAGS (-1) /* from resource */ #elif defined(CONFIG_ARCH_OMAP) @@ -252,17 +257,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_outw(v, a, r) writew(v, (a) + (r)) #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) - -#include <asm/mach-types.h> -#include <asm/arch/cpu.h> - -#define SMC_IRQ_FLAGS (( \ - machine_is_omap_h2() \ - || machine_is_omap_h3() \ - || machine_is_omap_h4() \ - || (machine_is_omap_innovator() && !cpu_is_omap1510()) \ - ) ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING) - +#define SMC_IRQ_FLAGS (-1) /* from resource */ #elif defined(CONFIG_SH_SH4202_MICRODEV) @@ -453,8 +448,7 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r, #define SMC_outl(v, a, r) writel(v, (a) + (r)) #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) #define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) - -#define SMC_IRQ_FLAGS (0) +#define SMC_IRQ_FLAGS (-1) /* from resource */ #else diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 874923fcb2f9..e439044d88f2 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -29,6 +29,7 @@ #include <asm/irq.h> #include <asm/system.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> #include <pcmcia/cs_types.h> #include <pcmcia/ss.h> diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 6f1e9a9804bc..2eb38520f0c8 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -337,6 +337,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev) if (IS_ERR(rtc)) return PTR_ERR(rtc); + device_init_wakeup(&pdev->dev, 1); + platform_set_drvdata(pdev, rtc); return 0; @@ -352,9 +354,38 @@ static int sa1100_rtc_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +static int sa1100_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + if (pdev->dev.power.power_state.event != state.event) { + if (state.event == PM_EVENT_SUSPEND && + device_may_wakeup(&pdev->dev)) + enable_irq_wake(IRQ_RTCAlrm); + + pdev->dev.power.power_state = state; + } + return 0; +} + +static int sa1100_rtc_resume(struct platform_device *pdev) +{ + if (pdev->dev.power.power_state.event != PM_EVENT_ON) { + if (device_may_wakeup(&pdev->dev)) + disable_irq_wake(IRQ_RTCAlrm); + pdev->dev.power.power_state = PMSG_ON; + } + return 0; +} +#else +#define sa1100_rtc_suspend NULL +#define sa1100_rtc_resume NULL +#endif + static struct platform_driver sa1100_rtc_driver = { .probe = sa1100_rtc_probe, .remove = sa1100_rtc_remove, + .suspend = sa1100_rtc_suspend, + .resume = sa1100_rtc_resume, .driver = { .name = "sa1100-rtc", }, diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index abf05048c638..aaaea81e412a 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -153,6 +153,7 @@ config SPI_OMAP24XX config SPI_PXA2XX tristate "PXA2xx SSP SPI master" depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL + select PXA_SSP help This enables using a PXA2xx SSP port as a SPI master controller. The driver can be configured to use any SSP port and additional diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 1c2ab541d37d..eb817b8eb024 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -27,6 +27,7 @@ #include <linux/spi/spi.h> #include <linux/workqueue.h> #include <linux/delay.h> +#include <linux/clk.h> #include <asm/io.h> #include <asm/irq.h> @@ -36,6 +37,8 @@ #include <asm/arch/hardware.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/regs-ssp.h> +#include <asm/arch/ssp.h> #include <asm/arch/pxa2xx_spi.h> MODULE_AUTHOR("Stephen Street"); @@ -80,6 +83,9 @@ struct driver_data { /* Driver model hookup */ struct platform_device *pdev; + /* SSP Info */ + struct ssp_device *ssp; + /* SPI framework hookup */ enum pxa_ssp_type ssp_type; struct spi_master *master; @@ -778,6 +784,16 @@ int set_dma_burst_and_threshold(struct chip_data *chip, struct spi_device *spi, return retval; } +static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate) +{ + unsigned long ssp_clk = clk_get_rate(ssp->clk); + + if (ssp->type == PXA25x_SSP) + return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8; + else + return ((ssp_clk / rate - 1) & 0xfff) << 8; +} + static void pump_transfers(unsigned long data) { struct driver_data *drv_data = (struct driver_data *)data; @@ -785,6 +801,7 @@ static void pump_transfers(unsigned long data) struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; struct chip_data *chip = NULL; + struct ssp_device *ssp = drv_data->ssp; void *reg = drv_data->ioaddr; u32 clk_div = 0; u8 bits = 0; @@ -866,12 +883,7 @@ static void pump_transfers(unsigned long data) if (transfer->bits_per_word) bits = transfer->bits_per_word; - if (reg == SSP1_VIRT) - clk_div = SSP1_SerClkDiv(speed); - else if (reg == SSP2_VIRT) - clk_div = SSP2_SerClkDiv(speed); - else if (reg == SSP3_VIRT) - clk_div = SSP3_SerClkDiv(speed); + clk_div = ssp_get_clk_div(ssp, speed); if (bits <= 8) { drv_data->n_bytes = 1; @@ -1074,6 +1086,7 @@ static int setup(struct spi_device *spi) struct pxa2xx_spi_chip *chip_info = NULL; struct chip_data *chip; struct driver_data *drv_data = spi_master_get_devdata(spi->master); + struct ssp_device *ssp = drv_data->ssp; unsigned int clk_div; if (!spi->bits_per_word) @@ -1157,18 +1170,7 @@ static int setup(struct spi_device *spi) } } - if (drv_data->ioaddr == SSP1_VIRT) - clk_div = SSP1_SerClkDiv(spi->max_speed_hz); - else if (drv_data->ioaddr == SSP2_VIRT) - clk_div = SSP2_SerClkDiv(spi->max_speed_hz); - else if (drv_data->ioaddr == SSP3_VIRT) - clk_div = SSP3_SerClkDiv(spi->max_speed_hz); - else - { - dev_err(&spi->dev, "failed setup: unknown IO address=0x%p\n", - drv_data->ioaddr); - return -ENODEV; - } + clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz); chip->speed_hz = spi->max_speed_hz; chip->cr0 = clk_div @@ -1183,15 +1185,15 @@ static int setup(struct spi_device *spi) /* NOTE: PXA25x_SSP _could_ use external clocking ... */ if (drv_data->ssp_type != PXA25x_SSP) - dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n", + dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n", spi->bits_per_word, - (CLOCK_SPEED_HZ) + clk_get_rate(ssp->clk) / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), spi->mode & 0x3); else - dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n", + dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n", spi->bits_per_word, - (CLOCK_SPEED_HZ/2) + clk_get_rate(ssp->clk) / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), spi->mode & 0x3); @@ -1323,14 +1325,14 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) struct pxa2xx_spi_master *platform_info; struct spi_master *master; struct driver_data *drv_data = 0; - struct resource *memory_resource; - int irq; + struct ssp_device *ssp; int status = 0; platform_info = dev->platform_data; - if (platform_info->ssp_type == SSP_UNDEFINED) { - dev_err(&pdev->dev, "undefined SSP\n"); + ssp = ssp_request(pdev->id, pdev->name); + if (ssp == NULL) { + dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id); return -ENODEV; } @@ -1338,12 +1340,14 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); if (!master) { dev_err(&pdev->dev, "can not alloc spi_master\n"); + ssp_free(ssp); return -ENOMEM; } drv_data = spi_master_get_devdata(master); drv_data->master = master; drv_data->master_info = platform_info; drv_data->pdev = pdev; + drv_data->ssp = ssp; master->bus_num = pdev->id; master->num_chipselect = platform_info->num_chipselect; @@ -1351,21 +1355,13 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) master->setup = setup; master->transfer = transfer; - drv_data->ssp_type = platform_info->ssp_type; + drv_data->ssp_type = ssp->type; drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data + sizeof(struct driver_data)), 8); - /* Setup register addresses */ - memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!memory_resource) { - dev_err(&pdev->dev, "memory resources not defined\n"); - status = -ENODEV; - goto out_error_master_alloc; - } - - drv_data->ioaddr = (void *)io_p2v((unsigned long)(memory_resource->start)); - drv_data->ssdr_physical = memory_resource->start + 0x00000010; - if (platform_info->ssp_type == PXA25x_SSP) { + drv_data->ioaddr = ssp->mmio_base; + drv_data->ssdr_physical = ssp->phys_base + SSDR; + if (ssp->type == PXA25x_SSP) { drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE; drv_data->dma_cr1 = 0; drv_data->clear_sr = SSSR_ROR; @@ -1377,15 +1373,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR; } - /* Attach to IRQ */ - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "irq resource not defined\n"); - status = -ENODEV; - goto out_error_master_alloc; - } - - status = request_irq(irq, ssp_int, 0, dev->bus_id, drv_data); + status = request_irq(ssp->irq, ssp_int, 0, dev->bus_id, drv_data); if (status < 0) { dev_err(&pdev->dev, "can not get IRQ\n"); goto out_error_master_alloc; @@ -1418,29 +1406,12 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) goto out_error_dma_alloc; } - if (drv_data->ioaddr == SSP1_VIRT) { - DRCMRRXSSDR = DRCMR_MAPVLD - | drv_data->rx_channel; - DRCMRTXSSDR = DRCMR_MAPVLD - | drv_data->tx_channel; - } else if (drv_data->ioaddr == SSP2_VIRT) { - DRCMRRXSS2DR = DRCMR_MAPVLD - | drv_data->rx_channel; - DRCMRTXSS2DR = DRCMR_MAPVLD - | drv_data->tx_channel; - } else if (drv_data->ioaddr == SSP3_VIRT) { - DRCMRRXSS3DR = DRCMR_MAPVLD - | drv_data->rx_channel; - DRCMRTXSS3DR = DRCMR_MAPVLD - | drv_data->tx_channel; - } else { - dev_err(dev, "bad SSP type\n"); - goto out_error_dma_alloc; - } + DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel; + DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel; } /* Enable SOC clock */ - pxa_set_cken(platform_info->clock_enable, 1); + clk_enable(ssp->clk); /* Load default SSP configuration */ write_SSCR0(0, drv_data->ioaddr); @@ -1479,7 +1450,7 @@ out_error_queue_alloc: destroy_queue(drv_data); out_error_clock_enabled: - pxa_set_cken(platform_info->clock_enable, 0); + clk_disable(ssp->clk); out_error_dma_alloc: if (drv_data->tx_channel != -1) @@ -1488,17 +1459,18 @@ out_error_dma_alloc: pxa_free_dma(drv_data->rx_channel); out_error_irq_alloc: - free_irq(irq, drv_data); + free_irq(ssp->irq, drv_data); out_error_master_alloc: spi_master_put(master); + ssp_free(ssp); return status; } static int pxa2xx_spi_remove(struct platform_device *pdev) { struct driver_data *drv_data = platform_get_drvdata(pdev); - int irq; + struct ssp_device *ssp = drv_data->ssp; int status = 0; if (!drv_data) @@ -1520,28 +1492,21 @@ static int pxa2xx_spi_remove(struct platform_device *pdev) /* Disable the SSP at the peripheral and SOC level */ write_SSCR0(0, drv_data->ioaddr); - pxa_set_cken(drv_data->master_info->clock_enable, 0); + clk_disable(ssp->clk); /* Release DMA */ if (drv_data->master_info->enable_dma) { - if (drv_data->ioaddr == SSP1_VIRT) { - DRCMRRXSSDR = 0; - DRCMRTXSSDR = 0; - } else if (drv_data->ioaddr == SSP2_VIRT) { - DRCMRRXSS2DR = 0; - DRCMRTXSS2DR = 0; - } else if (drv_data->ioaddr == SSP3_VIRT) { - DRCMRRXSS3DR = 0; - DRCMRTXSS3DR = 0; - } + DRCMR(ssp->drcmr_rx) = 0; + DRCMR(ssp->drcmr_tx) = 0; pxa_free_dma(drv_data->tx_channel); pxa_free_dma(drv_data->rx_channel); } /* Release IRQ */ - irq = platform_get_irq(pdev, 0); - if (irq >= 0) - free_irq(irq, drv_data); + free_irq(ssp->irq, drv_data); + + /* Release SSP */ + ssp_free(ssp); /* Disconnect from the SPI framework */ spi_unregister_master(drv_data->master); @@ -1576,6 +1541,7 @@ static int suspend_devices(struct device *dev, void *pm_message) static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state) { struct driver_data *drv_data = platform_get_drvdata(pdev); + struct ssp_device *ssp = drv_data->ssp; int status = 0; /* Check all childern for current power state */ @@ -1588,7 +1554,7 @@ static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state) if (status != 0) return status; write_SSCR0(0, drv_data->ioaddr); - pxa_set_cken(drv_data->master_info->clock_enable, 0); + clk_disable(ssp->clk); return 0; } @@ -1596,10 +1562,11 @@ static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state) static int pxa2xx_spi_resume(struct platform_device *pdev) { struct driver_data *drv_data = platform_get_drvdata(pdev); + struct ssp_device *ssp = drv_data->ssp; int status = 0; /* Enable the SSP clock */ - pxa_set_cken(drv_data->master_info->clock_enable, 1); + clk_disable(ssp->clk); /* Start the queue running */ status = start_queue(drv_data); diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 7580aa5da0f8..7a6499008b89 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -33,6 +33,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_LH7A404 default y if ARCH_S3C2410 default y if PXA27x + default y if PXA3xx default y if ARCH_EP93XX default y if ARCH_AT91 default y if ARCH_PNX4008 diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index ecfe800fd720..ddd4ee1f2413 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -997,7 +997,7 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_lh7a404_driver #endif -#ifdef CONFIG_PXA27x +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #include "ohci-pxa27x.c" #define PLATFORM_DRIVER ohci_hcd_pxa27x_driver #endif diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 23d2fe5a62f4..ff9a79843471 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -22,6 +22,7 @@ #include <linux/device.h> #include <linux/signal.h> #include <linux/platform_device.h> +#include <linux/clk.h> #include <asm/mach-types.h> #include <asm/hardware.h> @@ -32,6 +33,8 @@ #define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 ) +static struct clk *usb_clk; + /* PMM_NPS_MODE -- PMM Non-power switching mode Ports are powered continuously. @@ -80,7 +83,7 @@ static int pxa27x_start_hc(struct device *dev) inf = dev->platform_data; - pxa_set_cken(CKEN_USBHOST, 1); + clk_enable(usb_clk); UHCHR |= UHCHR_FHR; udelay(11); @@ -123,7 +126,7 @@ static void pxa27x_stop_hc(struct device *dev) UHCCOMS |= 1; udelay(10); - pxa_set_cken(CKEN_USBHOST, 0); + clk_disable(usb_clk); } @@ -158,6 +161,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device return -ENOMEM; } + usb_clk = clk_get(&pdev->dev, "USBCLK"); + if (IS_ERR(usb_clk)) + return PTR_ERR(usb_clk); + hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x"); if (!hcd) return -ENOMEM; @@ -201,6 +208,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); + clk_put(usb_clk); return retval; } @@ -225,6 +233,7 @@ void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev) iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); + clk_put(usb_clk); } /*-------------------------------------------------------------------------*/ diff --git a/include/asm-arm/arch-pxa/colibri.h b/include/asm-arm/arch-pxa/colibri.h new file mode 100644 index 000000000000..2ae373fb5675 --- /dev/null +++ b/include/asm-arm/arch-pxa/colibri.h @@ -0,0 +1,19 @@ +#ifndef _COLIBRI_H_ +#define _COLIBRI_H_ + +/* physical memory regions */ +#define COLIBRI_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ +#define COLIBRI_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */ +#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ + +/* virtual memory regions */ +#define COLIBRI_DISK_VIRT 0xF0000000 /* Disk On Chip region */ + +/* size of flash */ +#define COLIBRI_FLASH_SIZE 0x02000000 /* Flash size 32 MB */ + +/* Ethernet Controller Davicom DM9000 */ +#define GPIO_DM9000 114 +#define COLIBRI_ETH_IRQ IRQ_GPIO(GPIO_DM9000) + +#endif /* _COLIBRI_H_ */ diff --git a/include/asm-arm/arch-pxa/corgi.h b/include/asm-arm/arch-pxa/corgi.h index e554caa0d18b..bf856503baf6 100644 --- a/include/asm-arm/arch-pxa/corgi.h +++ b/include/asm-arm/arch-pxa/corgi.h @@ -104,7 +104,6 @@ */ extern struct platform_device corgiscoop_device; extern struct platform_device corgissp_device; -extern struct platform_device corgifb_device; #endif /* __ASM_ARCH_CORGI_H */ diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index b76ee6d1f5b4..c562b972a4a6 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -180,7 +180,8 @@ #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) #elif defined(CONFIG_ARCH_LUBBOCK) || \ defined(CONFIG_MACH_LOGICPD_PXA270) || \ - defined(CONFIG_MACH_MAINSTONE) + defined(CONFIG_MACH_MAINSTONE) || \ + defined(CONFIG_MACH_PCM027) #define NR_IRQS (IRQ_BOARD_END) #else #define NR_IRQS (IRQ_BOARD_START) @@ -227,6 +228,13 @@ #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) +/* phyCORE-PXA270 (PCM027) Interrupts */ +#define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) +#define PCM027_BTDET_IRQ PCM027_IRQ(0) +#define PCM027_FF_RI_IRQ PCM027_IRQ(1) +#define PCM027_MMCDET_IRQ PCM027_IRQ(2) +#define PCM027_PM_5V_IRQ PCM027_IRQ(3) + /* ITE8152 irqs */ /* add IT8152 IRQs beyond BOARD_END */ #ifdef CONFIG_PCI_HOST_ITE8152 diff --git a/include/asm-arm/arch-pxa/littleton.h b/include/asm-arm/arch-pxa/littleton.h new file mode 100644 index 000000000000..79d209b826f4 --- /dev/null +++ b/include/asm-arm/arch-pxa/littleton.h @@ -0,0 +1,6 @@ +#ifndef __ASM_ARCH_ZYLONITE_H +#define __ASM_ARCH_ZYLONITE_H + +#define LITTLETON_ETH_PHYS 0x30000000 + +#endif /* __ASM_ARCH_ZYLONITE_H */ diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h new file mode 100644 index 000000000000..337f51f06b3a --- /dev/null +++ b/include/asm-arm/arch-pxa/magician.h @@ -0,0 +1,111 @@ +/* + * GPIO and IRQ definitions for HTC Magician PDA phones + * + * Copyright (c) 2007 Philipp Zabel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _MAGICIAN_H_ +#define _MAGICIAN_H_ + +#include <asm/arch/pxa-regs.h> + +/* + * PXA GPIOs + */ + +#define GPIO0_MAGICIAN_KEY_POWER 0 +#define GPIO9_MAGICIAN_UNKNOWN 9 +#define GPIO10_MAGICIAN_GSM_IRQ 10 +#define GPIO11_MAGICIAN_GSM_OUT1 11 +#define GPIO13_MAGICIAN_CPLD_IRQ 13 +#define GPIO18_MAGICIAN_UNKNOWN 18 +#define GPIO22_MAGICIAN_VIBRA_EN 22 +#define GPIO26_MAGICIAN_GSM_POWER 26 +#define GPIO27_MAGICIAN_USBC_PUEN 27 +#define GPIO30_MAGICIAN_nCHARGE_EN 30 +#define GPIO37_MAGICIAN_KEY_HANGUP 37 +#define GPIO38_MAGICIAN_KEY_CONTACTS 38 +#define GPIO40_MAGICIAN_GSM_OUT2 40 +#define GPIO48_MAGICIAN_UNKNOWN 48 +#define GPIO56_MAGICIAN_UNKNOWN 56 +#define GPIO57_MAGICIAN_CAM_RESET 57 +#define GPIO83_MAGICIAN_nIR_EN 83 +#define GPIO86_MAGICIAN_GSM_RESET 86 +#define GPIO87_MAGICIAN_GSM_SELECT 87 +#define GPIO90_MAGICIAN_KEY_CALENDAR 90 +#define GPIO91_MAGICIAN_KEY_CAMERA 91 +#define GPIO93_MAGICIAN_KEY_UP 93 +#define GPIO94_MAGICIAN_KEY_DOWN 94 +#define GPIO95_MAGICIAN_KEY_LEFT 95 +#define GPIO96_MAGICIAN_KEY_RIGHT 96 +#define GPIO97_MAGICIAN_KEY_ENTER 97 +#define GPIO98_MAGICIAN_KEY_RECORD 98 +#define GPIO99_MAGICIAN_HEADPHONE_IN 99 +#define GPIO100_MAGICIAN_KEY_VOL_UP 100 +#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101 +#define GPIO102_MAGICIAN_KEY_PHONE 102 +#define GPIO103_MAGICIAN_LED_KP 103 +#define GPIO104_MAGICIAN_LCD_POWER_1 104 +#define GPIO105_MAGICIAN_LCD_POWER_2 105 +#define GPIO106_MAGICIAN_LCD_POWER_3 106 +#define GPIO107_MAGICIAN_DS1WM_IRQ 107 +#define GPIO108_MAGICIAN_GSM_READY 108 +#define GPIO114_MAGICIAN_UNKNOWN 114 +#define GPIO115_MAGICIAN_nPEN_IRQ 115 +#define GPIO116_MAGICIAN_nCAM_EN 116 +#define GPIO119_MAGICIAN_UNKNOWN 119 +#define GPIO120_MAGICIAN_UNKNOWN 120 + +/* + * PXA GPIO alternate function mode & direction + */ + +#define GPIO0_MAGICIAN_KEY_POWER_MD (0 | GPIO_IN) +#define GPIO9_MAGICIAN_UNKNOWN_MD (9 | GPIO_IN) +#define GPIO10_MAGICIAN_GSM_IRQ_MD (10 | GPIO_IN) +#define GPIO11_MAGICIAN_GSM_OUT1_MD (11 | GPIO_OUT) +#define GPIO13_MAGICIAN_CPLD_IRQ_MD (13 | GPIO_IN) +#define GPIO18_MAGICIAN_UNKNOWN_MD (18 | GPIO_OUT) +#define GPIO22_MAGICIAN_VIBRA_EN_MD (22 | GPIO_OUT) +#define GPIO26_MAGICIAN_GSM_POWER_MD (26 | GPIO_OUT) +#define GPIO27_MAGICIAN_USBC_PUEN_MD (27 | GPIO_OUT) +#define GPIO30_MAGICIAN_nCHARGE_EN_MD (30 | GPIO_OUT) +#define GPIO37_MAGICIAN_KEY_HANGUP_MD (37 | GPIO_OUT) +#define GPIO38_MAGICIAN_KEY_CONTACTS_MD (38 | GPIO_OUT) +#define GPIO40_MAGICIAN_GSM_OUT2_MD (40 | GPIO_OUT) +#define GPIO48_MAGICIAN_UNKNOWN_MD (48 | GPIO_OUT) +#define GPIO56_MAGICIAN_UNKNOWN_MD (56 | GPIO_OUT) +#define GPIO57_MAGICIAN_CAM_RESET_MD (57 | GPIO_OUT) +#define GPIO83_MAGICIAN_nIR_EN_MD (83 | GPIO_OUT) +#define GPIO86_MAGICIAN_GSM_RESET_MD (86 | GPIO_OUT) +#define GPIO87_MAGICIAN_GSM_SELECT_MD (87 | GPIO_OUT) +#define GPIO90_MAGICIAN_KEY_CALENDAR_MD (90 | GPIO_OUT) +#define GPIO91_MAGICIAN_KEY_CAMERA_MD (91 | GPIO_OUT) +#define GPIO93_MAGICIAN_KEY_UP_MD (93 | GPIO_IN) +#define GPIO94_MAGICIAN_KEY_DOWN_MD (94 | GPIO_IN) +#define GPIO95_MAGICIAN_KEY_LEFT_MD (95 | GPIO_IN) +#define GPIO96_MAGICIAN_KEY_RIGHT_MD (96 | GPIO_IN) +#define GPIO97_MAGICIAN_KEY_ENTER_MD (97 | GPIO_IN) +#define GPIO98_MAGICIAN_KEY_RECORD_MD (98 | GPIO_IN) +#define GPIO99_MAGICIAN_HEADPHONE_IN_MD (99 | GPIO_IN) +#define GPIO100_MAGICIAN_KEY_VOL_UP_MD (100 | GPIO_IN) +#define GPIO101_MAGICIAN_KEY_VOL_DOWN_MD (101 | GPIO_IN) +#define GPIO102_MAGICIAN_KEY_PHONE_MD (102 | GPIO_IN) +#define GPIO103_MAGICIAN_LED_KP_MD (103 | GPIO_OUT) +#define GPIO104_MAGICIAN_LCD_POWER_1_MD (104 | GPIO_OUT) +#define GPIO105_MAGICIAN_LCD_POWER_2_MD (105 | GPIO_OUT) +#define GPIO106_MAGICIAN_LCD_POWER_3_MD (106 | GPIO_OUT) +#define GPIO107_MAGICIAN_DS1WM_IRQ_MD (107 | GPIO_IN) +#define GPIO108_MAGICIAN_GSM_READY_MD (108 | GPIO_IN) +#define GPIO114_MAGICIAN_UNKNOWN_MD (114 | GPIO_OUT) +#define GPIO115_MAGICIAN_nPEN_IRQ_MD (115 | GPIO_IN) +#define GPIO116_MAGICIAN_nCAM_EN_MD (116 | GPIO_OUT) +#define GPIO119_MAGICIAN_UNKNOWN_MD (119 | GPIO_OUT) +#define GPIO120_MAGICIAN_UNKNOWN_MD (120 | GPIO_OUT) + +#endif /* _MAGICIAN_H_ */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h index a20996649889..bb410313556f 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa300.h +++ b/include/asm-arm/arch-pxa/mfp-pxa300.h @@ -16,6 +16,7 @@ #define __ASM_ARCH_MFP_PXA300_H #include <asm/arch/mfp.h> +#include <asm/arch/mfp-pxa3xx.h> /* GPIO */ #define GPIO46_GPIO MFP_CFG(GPIO46, AF1) diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h index 52deedcaf3bd..576aa46d90fc 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa320.h +++ b/include/asm-arm/arch-pxa/mfp-pxa320.h @@ -16,6 +16,7 @@ #define __ASM_ARCH_MFP_PXA320_H #include <asm/arch/mfp.h> +#include <asm/arch/mfp-pxa3xx.h> /* GPIO */ #define GPIO46_GPIO MFP_CFG(GPIO46, AF0) diff --git a/include/asm-arm/arch-pxa/mfp-pxa3xx.h b/include/asm-arm/arch-pxa/mfp-pxa3xx.h new file mode 100644 index 000000000000..1f6b35c015d0 --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa3xx.h @@ -0,0 +1,252 @@ +#ifndef __ASM_ARCH_MFP_PXA3XX_H +#define __ASM_ARCH_MFP_PXA3XX_H + +#define MFPR_BASE (0x40e10000) +#define MFPR_SIZE (PAGE_SIZE) + +/* MFPR register bit definitions */ +#define MFPR_PULL_SEL (0x1 << 15) +#define MFPR_PULLUP_EN (0x1 << 14) +#define MFPR_PULLDOWN_EN (0x1 << 13) +#define MFPR_SLEEP_SEL (0x1 << 9) +#define MFPR_SLEEP_OE_N (0x1 << 7) +#define MFPR_EDGE_CLEAR (0x1 << 6) +#define MFPR_EDGE_FALL_EN (0x1 << 5) +#define MFPR_EDGE_RISE_EN (0x1 << 4) + +#define MFPR_SLEEP_DATA(x) ((x) << 8) +#define MFPR_DRIVE(x) (((x) & 0x7) << 10) +#define MFPR_AF_SEL(x) (((x) & 0x7) << 0) + +#define MFPR_EDGE_NONE (0) +#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN) +#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN) +#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL) + +/* + * Table that determines the low power modes outputs, with actual settings + * used in parentheses for don't-care values. Except for the float output, + * the configured driven and pulled levels match, so if there is a need for + * non-LPM pulled output, the same configuration could probably be used. + * + * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel + * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) + * + * Input 0 X(0) X(0) X(0) 0 + * Drive 0 0 0 0 X(1) 0 + * Drive 1 0 1 X(1) 0 0 + * Pull hi (1) 1 X(1) 1 0 0 + * Pull lo (0) 1 X(0) 0 1 0 + * Z (float) 1 X(0) 0 0 0 + */ +#define MFPR_LPM_INPUT (0) +#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN) +#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN) +#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N) +#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N) +#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N) +#define MFPR_LPM_MASK (0xe080) + +/* + * The pullup and pulldown state of the MFP pin at run mode is by default + * determined by the selected alternate function. In case that some buggy + * devices need to override this default behavior, the definitions below + * indicates the setting of corresponding MFPR bits + * + * Definition pull_sel pullup_en pulldown_en + * MFPR_PULL_NONE 0 0 0 + * MFPR_PULL_LOW 1 0 1 + * MFPR_PULL_HIGH 1 1 0 + * MFPR_PULL_BOTH 1 1 1 + */ +#define MFPR_PULL_NONE (0) +#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) +#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) +#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) + +/* PXA3xx common MFP configurations - processor specific ones defined + * in mfp-pxa300.h and mfp-pxa320.h + */ +#define GPIO0_GPIO MFP_CFG(GPIO0, AF0) +#define GPIO1_GPIO MFP_CFG(GPIO1, AF0) +#define GPIO2_GPIO MFP_CFG(GPIO2, AF0) +#define GPIO3_GPIO MFP_CFG(GPIO3, AF0) +#define GPIO4_GPIO MFP_CFG(GPIO4, AF0) +#define GPIO5_GPIO MFP_CFG(GPIO5, AF0) +#define GPIO6_GPIO MFP_CFG(GPIO6, AF0) +#define GPIO7_GPIO MFP_CFG(GPIO7, AF0) +#define GPIO8_GPIO MFP_CFG(GPIO8, AF0) +#define GPIO9_GPIO MFP_CFG(GPIO9, AF0) +#define GPIO10_GPIO MFP_CFG(GPIO10, AF0) +#define GPIO11_GPIO MFP_CFG(GPIO11, AF0) +#define GPIO12_GPIO MFP_CFG(GPIO12, AF0) +#define GPIO13_GPIO MFP_CFG(GPIO13, AF0) +#define GPIO14_GPIO MFP_CFG(GPIO14, AF0) +#define GPIO15_GPIO MFP_CFG(GPIO15, AF0) +#define GPIO16_GPIO MFP_CFG(GPIO16, AF0) +#define GPIO17_GPIO MFP_CFG(GPIO17, AF0) +#define GPIO18_GPIO MFP_CFG(GPIO18, AF0) +#define GPIO19_GPIO MFP_CFG(GPIO19, AF0) +#define GPIO20_GPIO MFP_CFG(GPIO20, AF0) +#define GPIO21_GPIO MFP_CFG(GPIO21, AF0) +#define GPIO22_GPIO MFP_CFG(GPIO22, AF0) +#define GPIO23_GPIO MFP_CFG(GPIO23, AF0) +#define GPIO24_GPIO MFP_CFG(GPIO24, AF0) +#define GPIO25_GPIO MFP_CFG(GPIO25, AF0) +#define GPIO26_GPIO MFP_CFG(GPIO26, AF0) +#define GPIO27_GPIO MFP_CFG(GPIO27, AF0) +#define GPIO28_GPIO MFP_CFG(GPIO28, AF0) +#define GPIO29_GPIO MFP_CFG(GPIO29, AF0) +#define GPIO30_GPIO MFP_CFG(GPIO30, AF0) +#define GPIO31_GPIO MFP_CFG(GPIO31, AF0) +#define GPIO32_GPIO MFP_CFG(GPIO32, AF0) +#define GPIO33_GPIO MFP_CFG(GPIO33, AF0) +#define GPIO34_GPIO MFP_CFG(GPIO34, AF0) +#define GPIO35_GPIO MFP_CFG(GPIO35, AF0) +#define GPIO36_GPIO MFP_CFG(GPIO36, AF0) +#define GPIO37_GPIO MFP_CFG(GPIO37, AF0) +#define GPIO38_GPIO MFP_CFG(GPIO38, AF0) +#define GPIO39_GPIO MFP_CFG(GPIO39, AF0) +#define GPIO40_GPIO MFP_CFG(GPIO40, AF0) +#define GPIO41_GPIO MFP_CFG(GPIO41, AF0) +#define GPIO42_GPIO MFP_CFG(GPIO42, AF0) +#define GPIO43_GPIO MFP_CFG(GPIO43, AF0) +#define GPIO44_GPIO MFP_CFG(GPIO44, AF0) +#define GPIO45_GPIO MFP_CFG(GPIO45, AF0) + +#define GPIO47_GPIO MFP_CFG(GPIO47, AF0) +#define GPIO48_GPIO MFP_CFG(GPIO48, AF0) + +#define GPIO53_GPIO MFP_CFG(GPIO53, AF0) +#define GPIO54_GPIO MFP_CFG(GPIO54, AF0) +#define GPIO55_GPIO MFP_CFG(GPIO55, AF0) + +#define GPIO57_GPIO MFP_CFG(GPIO57, AF0) + +#define GPIO63_GPIO MFP_CFG(GPIO63, AF0) +#define GPIO64_GPIO MFP_CFG(GPIO64, AF0) +#define GPIO65_GPIO MFP_CFG(GPIO65, AF0) +#define GPIO66_GPIO MFP_CFG(GPIO66, AF0) +#define GPIO67_GPIO MFP_CFG(GPIO67, AF0) +#define GPIO68_GPIO MFP_CFG(GPIO68, AF0) +#define GPIO69_GPIO MFP_CFG(GPIO69, AF0) +#define GPIO70_GPIO MFP_CFG(GPIO70, AF0) +#define GPIO71_GPIO MFP_CFG(GPIO71, AF0) +#define GPIO72_GPIO MFP_CFG(GPIO72, AF0) +#define GPIO73_GPIO MFP_CFG(GPIO73, AF0) +#define GPIO74_GPIO MFP_CFG(GPIO74, AF0) +#define GPIO75_GPIO MFP_CFG(GPIO75, AF0) +#define GPIO76_GPIO MFP_CFG(GPIO76, AF0) +#define GPIO77_GPIO MFP_CFG(GPIO77, AF0) +#define GPIO78_GPIO MFP_CFG(GPIO78, AF0) +#define GPIO79_GPIO MFP_CFG(GPIO79, AF0) +#define GPIO80_GPIO MFP_CFG(GPIO80, AF0) +#define GPIO81_GPIO MFP_CFG(GPIO81, AF0) +#define GPIO82_GPIO MFP_CFG(GPIO82, AF0) +#define GPIO83_GPIO MFP_CFG(GPIO83, AF0) +#define GPIO84_GPIO MFP_CFG(GPIO84, AF0) +#define GPIO85_GPIO MFP_CFG(GPIO85, AF0) +#define GPIO86_GPIO MFP_CFG(GPIO86, AF0) +#define GPIO87_GPIO MFP_CFG(GPIO87, AF0) +#define GPIO88_GPIO MFP_CFG(GPIO88, AF0) +#define GPIO89_GPIO MFP_CFG(GPIO89, AF0) +#define GPIO90_GPIO MFP_CFG(GPIO90, AF0) +#define GPIO91_GPIO MFP_CFG(GPIO91, AF0) +#define GPIO92_GPIO MFP_CFG(GPIO92, AF0) +#define GPIO93_GPIO MFP_CFG(GPIO93, AF0) +#define GPIO94_GPIO MFP_CFG(GPIO94, AF0) +#define GPIO95_GPIO MFP_CFG(GPIO95, AF0) +#define GPIO96_GPIO MFP_CFG(GPIO96, AF0) +#define GPIO97_GPIO MFP_CFG(GPIO97, AF0) +#define GPIO98_GPIO MFP_CFG(GPIO98, AF0) +#define GPIO99_GPIO MFP_CFG(GPIO99, AF0) +#define GPIO100_GPIO MFP_CFG(GPIO100, AF0) +#define GPIO101_GPIO MFP_CFG(GPIO101, AF0) +#define GPIO102_GPIO MFP_CFG(GPIO102, AF0) +#define GPIO103_GPIO MFP_CFG(GPIO103, AF0) +#define GPIO104_GPIO MFP_CFG(GPIO104, AF0) +#define GPIO105_GPIO MFP_CFG(GPIO105, AF0) +#define GPIO106_GPIO MFP_CFG(GPIO106, AF0) +#define GPIO107_GPIO MFP_CFG(GPIO107, AF0) +#define GPIO108_GPIO MFP_CFG(GPIO108, AF0) +#define GPIO109_GPIO MFP_CFG(GPIO109, AF0) +#define GPIO110_GPIO MFP_CFG(GPIO110, AF0) +#define GPIO111_GPIO MFP_CFG(GPIO111, AF0) +#define GPIO112_GPIO MFP_CFG(GPIO112, AF0) +#define GPIO113_GPIO MFP_CFG(GPIO113, AF0) +#define GPIO114_GPIO MFP_CFG(GPIO114, AF0) +#define GPIO115_GPIO MFP_CFG(GPIO115, AF0) +#define GPIO116_GPIO MFP_CFG(GPIO116, AF0) +#define GPIO117_GPIO MFP_CFG(GPIO117, AF0) +#define GPIO118_GPIO MFP_CFG(GPIO118, AF0) +#define GPIO119_GPIO MFP_CFG(GPIO119, AF0) +#define GPIO120_GPIO MFP_CFG(GPIO120, AF0) +#define GPIO121_GPIO MFP_CFG(GPIO121, AF0) +#define GPIO122_GPIO MFP_CFG(GPIO122, AF0) +#define GPIO123_GPIO MFP_CFG(GPIO123, AF0) +#define GPIO124_GPIO MFP_CFG(GPIO124, AF0) +#define GPIO125_GPIO MFP_CFG(GPIO125, AF0) +#define GPIO126_GPIO MFP_CFG(GPIO126, AF0) +#define GPIO127_GPIO MFP_CFG(GPIO127, AF0) + +#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0) +#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0) +#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0) +#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0) +#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0) +#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) +#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) + +/* + * each MFP pin will have a MFPR register, since the offset of the + * register varies between processors, the processor specific code + * should initialize the pin offsets by pxa3xx_mfp_init_addr() + * + * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" + * structure, which represents a range of MFP pins from "start" to + * "end", with the offset begining at "offset", to define a single + * pin, let "end" = -1 + * + * use + * + * MFP_ADDR_X() to define a range of pins + * MFP_ADDR() to define a single pin + * MFP_ADDR_END to signal the end of pin offset definitions + */ +struct pxa3xx_mfp_addr_map { + unsigned int start; + unsigned int end; + unsigned long offset; +}; + +#define MFP_ADDR_X(start, end, offset) \ + { MFP_PIN_##start, MFP_PIN_##end, offset } + +#define MFP_ADDR(pin, offset) \ + { MFP_PIN_##pin, -1, offset } + +#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } + +/* + * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access + * to the MFPR register + */ +unsigned long pxa3xx_mfp_read(int mfp); +void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); + +/* + * pxa3xx_mfp_config - configure the MFPR registers + * + * used by board specific initialization code + */ +void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num); + +/* + * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin + * index and MFPR register offset + * + * used by processor specific code + */ +void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); +void __init pxa3xx_init_mfp(void); +#endif /* __ASM_ARCH_MFP_PXA3XX_H */ diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h index 03c508d94f0e..02f6157396d3 100644 --- a/include/asm-arm/arch-pxa/mfp.h +++ b/include/asm-arm/arch-pxa/mfp.h @@ -16,9 +16,6 @@ #ifndef __ASM_ARCH_MFP_H #define __ASM_ARCH_MFP_H -#define MFPR_BASE (0x40e10000) -#define MFPR_SIZE (PAGE_SIZE) - #define mfp_to_gpio(m) ((m) % 128) /* list of all the configurable MFP pins */ @@ -217,114 +214,21 @@ enum { }; /* - * Table that determines the low power modes outputs, with actual settings - * used in parentheses for don't-care values. Except for the float output, - * the configured driven and pulled levels match, so if there is a need for - * non-LPM pulled output, the same configuration could probably be used. - * - * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel - * (bit 7) (bit 8) (bit 14d) (bit 13d) - * - * Drive 0 0 0 0 X (1) 0 - * Drive 1 0 1 X (1) 0 0 - * Pull hi (1) 1 X(1) 1 0 0 - * Pull lo (0) 1 X(0) 0 1 0 - * Z (float) 1 X(0) 0 0 0 - */ -#define MFP_LPM_DRIVE_LOW 0x8 -#define MFP_LPM_DRIVE_HIGH 0x6 -#define MFP_LPM_PULL_HIGH 0x7 -#define MFP_LPM_PULL_LOW 0x9 -#define MFP_LPM_FLOAT 0x1 -#define MFP_LPM_PULL_NEITHER 0x0 - -/* - * The pullup and pulldown state of the MFP pin is by default determined by - * selected alternate function. In case some buggy devices need to override - * this default behavior, pxa3xx_mfp_set_pull() can be invoked with one of - * the following definition as the parameter. - * - * Definition pull_sel pullup_en pulldown_en - * MFP_PULL_HIGH 1 1 0 - * MFP_PULL_LOW 1 0 1 - * MFP_PULL_BOTH 1 1 1 - * MFP_PULL_NONE 1 0 0 - * MFP_PULL_DEFAULT 0 X X - * - * NOTE: pxa3xx_mfp_set_pull() will modify the PULLUP_EN and PULLDOWN_EN - * bits, which will cause potential conflicts with the low power mode - * setting, device drivers should take care of this - */ -#define MFP_PULL_BOTH (0x7u) -#define MFP_PULL_HIGH (0x6u) -#define MFP_PULL_LOW (0x5u) -#define MFP_PULL_NONE (0x4u) -#define MFP_PULL_DEFAULT (0x0u) - -#define MFP_AF0 (0) -#define MFP_AF1 (1) -#define MFP_AF2 (2) -#define MFP_AF3 (3) -#define MFP_AF4 (4) -#define MFP_AF5 (5) -#define MFP_AF6 (6) -#define MFP_AF7 (7) - -#define MFP_DS01X (0) -#define MFP_DS02X (1) -#define MFP_DS03X (2) -#define MFP_DS04X (3) -#define MFP_DS06X (4) -#define MFP_DS08X (5) -#define MFP_DS10X (6) -#define MFP_DS12X (7) - -#define MFP_EDGE_BOTH 0x3 -#define MFP_EDGE_RISE 0x2 -#define MFP_EDGE_FALL 0x1 -#define MFP_EDGE_NONE 0x0 - -#define MFPR_AF_MASK 0x0007 -#define MFPR_DRV_MASK 0x1c00 -#define MFPR_RDH_MASK 0x0200 -#define MFPR_LPM_MASK 0xe180 -#define MFPR_PULL_MASK 0xe000 -#define MFPR_EDGE_MASK 0x0070 - -#define MFPR_ALT_OFFSET 0 -#define MFPR_ERE_OFFSET 4 -#define MFPR_EFE_OFFSET 5 -#define MFPR_EC_OFFSET 6 -#define MFPR_SON_OFFSET 7 -#define MFPR_SD_OFFSET 8 -#define MFPR_SS_OFFSET 9 -#define MFPR_DRV_OFFSET 10 -#define MFPR_PD_OFFSET 13 -#define MFPR_PU_OFFSET 14 -#define MFPR_PS_OFFSET 15 - -#define MFPR(af, drv, rdh, lpm, edge) \ - (((af) & 0x7) | (((drv) & 0x7) << 10) |\ - (((rdh) & 0x1) << 9) |\ - (((lpm) & 0x3) << 7) |\ - (((lpm) & 0x4) << 12)|\ - (((lpm) & 0x8) << 10)|\ - ((!(edge)) << 6) |\ - (((edge) & 0x1) << 5) |\ - (((edge) & 0x2) << 3)) - -/* * a possible MFP configuration is represented by a 32-bit integer - * bit 0..15 - MFPR value (16-bit) - * bit 16..31 - mfp pin index (used to obtain the MFPR offset) + * + * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) + * bit 10..12 - Alternate Function Selection + * bit 13..15 - Drive Strength + * bit 16..18 - Low Power Mode State + * bit 19..20 - Low Power Mode Edge Detection + * bit 21..22 - Run Mode Pull State * * to facilitate the definition, the following macros are provided * - * MFPR_DEFAULT - default MFPR value, with + * MFP_CFG_DEFAULT - default MFP configuration value, with * alternate function = 0, - * drive strength = fast 1mA (MFP_DS01X) + * drive strength = fast 3mA (MFP_DS03X) * low power mode = default - * release dalay hold = false (RDH bit) * edge detection = none * * MFP_CFG - default MFPR value with alternate function @@ -334,251 +238,74 @@ enum { * low power mode * MFP_CFG_X - default MFPR value with alternate function, * pin drive strength and low power mode - * - * use - * - * MFP_CFG_PIN - to get the MFP pin index - * MFP_CFG_VAL - to get the corresponding MFPR value */ -typedef uint32_t mfp_cfg_t; - -#define MFP_CFG_PIN(mfp_cfg) (((mfp_cfg) >> 16) & 0xffff) -#define MFP_CFG_VAL(mfp_cfg) ((mfp_cfg) & 0xffff) - -/* - * MFP register defaults to - * drive strength fast 3mA (010'b) - * edge detection logic disabled - * alternate function 0 - */ -#define MFPR_DEFAULT (0x0840) +typedef unsigned long mfp_cfg_t; + +#define MFP_PIN(x) ((x) & 0x3ff) + +#define MFP_AF0 (0x0 << 10) +#define MFP_AF1 (0x1 << 10) +#define MFP_AF2 (0x2 << 10) +#define MFP_AF3 (0x3 << 10) +#define MFP_AF4 (0x4 << 10) +#define MFP_AF5 (0x5 << 10) +#define MFP_AF6 (0x6 << 10) +#define MFP_AF7 (0x7 << 10) +#define MFP_AF_MASK (0x7 << 10) +#define MFP_AF(x) (((x) >> 10) & 0x7) + +#define MFP_DS01X (0x0 << 13) +#define MFP_DS02X (0x1 << 13) +#define MFP_DS03X (0x2 << 13) +#define MFP_DS04X (0x3 << 13) +#define MFP_DS06X (0x4 << 13) +#define MFP_DS08X (0x5 << 13) +#define MFP_DS10X (0x6 << 13) +#define MFP_DS13X (0x7 << 13) +#define MFP_DS_MASK (0x7 << 13) +#define MFP_DS(x) (((x) >> 13) & 0x7) + +#define MFP_LPM_INPUT (0x0 << 16) +#define MFP_LPM_DRIVE_LOW (0x1 << 16) +#define MFP_LPM_DRIVE_HIGH (0x2 << 16) +#define MFP_LPM_PULL_LOW (0x3 << 16) +#define MFP_LPM_PULL_HIGH (0x4 << 16) +#define MFP_LPM_FLOAT (0x5 << 16) +#define MFP_LPM_STATE_MASK (0x7 << 16) +#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) + +#define MFP_LPM_EDGE_NONE (0x0 << 19) +#define MFP_LPM_EDGE_RISE (0x1 << 19) +#define MFP_LPM_EDGE_FALL (0x2 << 19) +#define MFP_LPM_EDGE_BOTH (0x3 << 19) +#define MFP_LPM_EDGE_MASK (0x3 << 19) +#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) + +#define MFP_PULL_NONE (0x0 << 21) +#define MFP_PULL_LOW (0x1 << 21) +#define MFP_PULL_HIGH (0x2 << 21) +#define MFP_PULL_BOTH (0x3 << 21) +#define MFP_PULL_MASK (0x3 << 21) +#define MFP_PULL(x) (((x) >> 21) & 0x3) + +#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\ + MFP_LPM_EDGE_NONE | MFP_PULL_NONE) #define MFP_CFG(pin, af) \ - ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af)) + ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) #define MFP_CFG_DRV(pin, af, drv) \ - ((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_DRV_MASK) |\ - ((MFP_##drv) << 10) | (MFP_##af)) + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) #define MFP_CFG_LPM(pin, af, lpm) \ - ((MFP_PIN_##pin << 16) | (MFPR_DEFAULT & ~MFPR_LPM_MASK) |\ - (((MFP_LPM_##lpm) & 0x3) << 7) |\ - (((MFP_LPM_##lpm) & 0x4) << 12) |\ - (((MFP_LPM_##lpm) & 0x8) << 10) |\ - (MFP_##af)) + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) #define MFP_CFG_X(pin, af, drv, lpm) \ - ((MFP_PIN_##pin << 16) |\ - (MFPR_DEFAULT & ~(MFPR_DRV_MASK | MFPR_LPM_MASK)) |\ - ((MFP_##drv) << 10) | (MFP_##af) |\ - (((MFP_LPM_##lpm) & 0x3) << 7) |\ - (((MFP_LPM_##lpm) & 0x4) << 12) |\ - (((MFP_LPM_##lpm) & 0x8) << 10)) - -/* common MFP configurations - processor specific ones defined - * in mfp-pxa3xx.h - */ -#define GPIO0_GPIO MFP_CFG(GPIO0, AF0) -#define GPIO1_GPIO MFP_CFG(GPIO1, AF0) -#define GPIO2_GPIO MFP_CFG(GPIO2, AF0) -#define GPIO3_GPIO MFP_CFG(GPIO3, AF0) -#define GPIO4_GPIO MFP_CFG(GPIO4, AF0) -#define GPIO5_GPIO MFP_CFG(GPIO5, AF0) -#define GPIO6_GPIO MFP_CFG(GPIO6, AF0) -#define GPIO7_GPIO MFP_CFG(GPIO7, AF0) -#define GPIO8_GPIO MFP_CFG(GPIO8, AF0) -#define GPIO9_GPIO MFP_CFG(GPIO9, AF0) -#define GPIO10_GPIO MFP_CFG(GPIO10, AF0) -#define GPIO11_GPIO MFP_CFG(GPIO11, AF0) -#define GPIO12_GPIO MFP_CFG(GPIO12, AF0) -#define GPIO13_GPIO MFP_CFG(GPIO13, AF0) -#define GPIO14_GPIO MFP_CFG(GPIO14, AF0) -#define GPIO15_GPIO MFP_CFG(GPIO15, AF0) -#define GPIO16_GPIO MFP_CFG(GPIO16, AF0) -#define GPIO17_GPIO MFP_CFG(GPIO17, AF0) -#define GPIO18_GPIO MFP_CFG(GPIO18, AF0) -#define GPIO19_GPIO MFP_CFG(GPIO19, AF0) -#define GPIO20_GPIO MFP_CFG(GPIO20, AF0) -#define GPIO21_GPIO MFP_CFG(GPIO21, AF0) -#define GPIO22_GPIO MFP_CFG(GPIO22, AF0) -#define GPIO23_GPIO MFP_CFG(GPIO23, AF0) -#define GPIO24_GPIO MFP_CFG(GPIO24, AF0) -#define GPIO25_GPIO MFP_CFG(GPIO25, AF0) -#define GPIO26_GPIO MFP_CFG(GPIO26, AF0) -#define GPIO27_GPIO MFP_CFG(GPIO27, AF0) -#define GPIO28_GPIO MFP_CFG(GPIO28, AF0) -#define GPIO29_GPIO MFP_CFG(GPIO29, AF0) -#define GPIO30_GPIO MFP_CFG(GPIO30, AF0) -#define GPIO31_GPIO MFP_CFG(GPIO31, AF0) -#define GPIO32_GPIO MFP_CFG(GPIO32, AF0) -#define GPIO33_GPIO MFP_CFG(GPIO33, AF0) -#define GPIO34_GPIO MFP_CFG(GPIO34, AF0) -#define GPIO35_GPIO MFP_CFG(GPIO35, AF0) -#define GPIO36_GPIO MFP_CFG(GPIO36, AF0) -#define GPIO37_GPIO MFP_CFG(GPIO37, AF0) -#define GPIO38_GPIO MFP_CFG(GPIO38, AF0) -#define GPIO39_GPIO MFP_CFG(GPIO39, AF0) -#define GPIO40_GPIO MFP_CFG(GPIO40, AF0) -#define GPIO41_GPIO MFP_CFG(GPIO41, AF0) -#define GPIO42_GPIO MFP_CFG(GPIO42, AF0) -#define GPIO43_GPIO MFP_CFG(GPIO43, AF0) -#define GPIO44_GPIO MFP_CFG(GPIO44, AF0) -#define GPIO45_GPIO MFP_CFG(GPIO45, AF0) - -#define GPIO47_GPIO MFP_CFG(GPIO47, AF0) -#define GPIO48_GPIO MFP_CFG(GPIO48, AF0) - -#define GPIO53_GPIO MFP_CFG(GPIO53, AF0) -#define GPIO54_GPIO MFP_CFG(GPIO54, AF0) -#define GPIO55_GPIO MFP_CFG(GPIO55, AF0) - -#define GPIO57_GPIO MFP_CFG(GPIO57, AF0) - -#define GPIO63_GPIO MFP_CFG(GPIO63, AF0) -#define GPIO64_GPIO MFP_CFG(GPIO64, AF0) -#define GPIO65_GPIO MFP_CFG(GPIO65, AF0) -#define GPIO66_GPIO MFP_CFG(GPIO66, AF0) -#define GPIO67_GPIO MFP_CFG(GPIO67, AF0) -#define GPIO68_GPIO MFP_CFG(GPIO68, AF0) -#define GPIO69_GPIO MFP_CFG(GPIO69, AF0) -#define GPIO70_GPIO MFP_CFG(GPIO70, AF0) -#define GPIO71_GPIO MFP_CFG(GPIO71, AF0) -#define GPIO72_GPIO MFP_CFG(GPIO72, AF0) -#define GPIO73_GPIO MFP_CFG(GPIO73, AF0) -#define GPIO74_GPIO MFP_CFG(GPIO74, AF0) -#define GPIO75_GPIO MFP_CFG(GPIO75, AF0) -#define GPIO76_GPIO MFP_CFG(GPIO76, AF0) -#define GPIO77_GPIO MFP_CFG(GPIO77, AF0) -#define GPIO78_GPIO MFP_CFG(GPIO78, AF0) -#define GPIO79_GPIO MFP_CFG(GPIO79, AF0) -#define GPIO80_GPIO MFP_CFG(GPIO80, AF0) -#define GPIO81_GPIO MFP_CFG(GPIO81, AF0) -#define GPIO82_GPIO MFP_CFG(GPIO82, AF0) -#define GPIO83_GPIO MFP_CFG(GPIO83, AF0) -#define GPIO84_GPIO MFP_CFG(GPIO84, AF0) -#define GPIO85_GPIO MFP_CFG(GPIO85, AF0) -#define GPIO86_GPIO MFP_CFG(GPIO86, AF0) -#define GPIO87_GPIO MFP_CFG(GPIO87, AF0) -#define GPIO88_GPIO MFP_CFG(GPIO88, AF0) -#define GPIO89_GPIO MFP_CFG(GPIO89, AF0) -#define GPIO90_GPIO MFP_CFG(GPIO90, AF0) -#define GPIO91_GPIO MFP_CFG(GPIO91, AF0) -#define GPIO92_GPIO MFP_CFG(GPIO92, AF0) -#define GPIO93_GPIO MFP_CFG(GPIO93, AF0) -#define GPIO94_GPIO MFP_CFG(GPIO94, AF0) -#define GPIO95_GPIO MFP_CFG(GPIO95, AF0) -#define GPIO96_GPIO MFP_CFG(GPIO96, AF0) -#define GPIO97_GPIO MFP_CFG(GPIO97, AF0) -#define GPIO98_GPIO MFP_CFG(GPIO98, AF0) -#define GPIO99_GPIO MFP_CFG(GPIO99, AF0) -#define GPIO100_GPIO MFP_CFG(GPIO100, AF0) -#define GPIO101_GPIO MFP_CFG(GPIO101, AF0) -#define GPIO102_GPIO MFP_CFG(GPIO102, AF0) -#define GPIO103_GPIO MFP_CFG(GPIO103, AF0) -#define GPIO104_GPIO MFP_CFG(GPIO104, AF0) -#define GPIO105_GPIO MFP_CFG(GPIO105, AF0) -#define GPIO106_GPIO MFP_CFG(GPIO106, AF0) -#define GPIO107_GPIO MFP_CFG(GPIO107, AF0) -#define GPIO108_GPIO MFP_CFG(GPIO108, AF0) -#define GPIO109_GPIO MFP_CFG(GPIO109, AF0) -#define GPIO110_GPIO MFP_CFG(GPIO110, AF0) -#define GPIO111_GPIO MFP_CFG(GPIO111, AF0) -#define GPIO112_GPIO MFP_CFG(GPIO112, AF0) -#define GPIO113_GPIO MFP_CFG(GPIO113, AF0) -#define GPIO114_GPIO MFP_CFG(GPIO114, AF0) -#define GPIO115_GPIO MFP_CFG(GPIO115, AF0) -#define GPIO116_GPIO MFP_CFG(GPIO116, AF0) -#define GPIO117_GPIO MFP_CFG(GPIO117, AF0) -#define GPIO118_GPIO MFP_CFG(GPIO118, AF0) -#define GPIO119_GPIO MFP_CFG(GPIO119, AF0) -#define GPIO120_GPIO MFP_CFG(GPIO120, AF0) -#define GPIO121_GPIO MFP_CFG(GPIO121, AF0) -#define GPIO122_GPIO MFP_CFG(GPIO122, AF0) -#define GPIO123_GPIO MFP_CFG(GPIO123, AF0) -#define GPIO124_GPIO MFP_CFG(GPIO124, AF0) -#define GPIO125_GPIO MFP_CFG(GPIO125, AF0) -#define GPIO126_GPIO MFP_CFG(GPIO126, AF0) -#define GPIO127_GPIO MFP_CFG(GPIO127, AF0) - -#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0) -#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0) -#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0) -#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0) -#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0) -#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) -#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) - -/* - * each MFP pin will have a MFPR register, since the offset of the - * register varies between processors, the processor specific code - * should initialize the pin offsets by pxa3xx_mfp_init_addr() - * - * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" - * structure, which represents a range of MFP pins from "start" to - * "end", with the offset begining at "offset", to define a single - * pin, let "end" = -1 - * - * use - * - * MFP_ADDR_X() to define a range of pins - * MFP_ADDR() to define a single pin - * MFP_ADDR_END to signal the end of pin offset definitions - */ -struct pxa3xx_mfp_addr_map { - unsigned int start; - unsigned int end; - unsigned long offset; -}; - -#define MFP_ADDR_X(start, end, offset) \ - { MFP_PIN_##start, MFP_PIN_##end, offset } - -#define MFP_ADDR(pin, offset) \ - { MFP_PIN_##pin, -1, offset } - -#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } - -struct pxa3xx_mfp_pin { - unsigned long mfpr_off; /* MFPRxx register offset */ - unsigned long mfpr_val; /* MFPRxx register value */ -}; - -/* - * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access - * to the MFPR register - */ -unsigned long pxa3xx_mfp_read(int mfp); -void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); - -/* - * pxa3xx_mfp_set_afds - set MFP alternate function and drive strength - * pxa3xx_mfp_set_rdh - set MFP release delay hold on/off - * pxa3xx_mfp_set_lpm - set MFP low power mode state - * pxa3xx_mfp_set_edge - set MFP edge detection in low power mode - * - * use these functions to override/change the default configuration - * done by pxa3xx_mfp_set_config(s) - */ -void pxa3xx_mfp_set_afds(int mfp, int af, int ds); -void pxa3xx_mfp_set_rdh(int mfp, int rdh); -void pxa3xx_mfp_set_lpm(int mfp, int lpm); -void pxa3xx_mfp_set_edge(int mfp, int edge); - -/* - * pxa3xx_mfp_config - configure the MFPR registers - * - * used by board specific initialization code - */ -void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num); - -/* - * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin - * index and MFPR register offset - * - * used by processor specific code - */ -void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); -void __init pxa3xx_init_mfp(void); + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) #endif /* __ASM_ARCH_MFP_H */ diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h index ef4f570381d1..6d1304c9270f 100644 --- a/include/asm-arm/arch-pxa/mmc.h +++ b/include/asm-arm/arch-pxa/mmc.h @@ -17,5 +17,7 @@ struct pxamci_platform_data { }; extern void pxa_set_mci_info(struct pxamci_platform_data *info); +extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info); +extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info); #endif diff --git a/include/asm-arm/arch-pxa/pcm027.h b/include/asm-arm/arch-pxa/pcm027.h new file mode 100644 index 000000000000..7beae1472c3e --- /dev/null +++ b/include/asm-arm/arch-pxa/pcm027.h @@ -0,0 +1,75 @@ +/* + * linux/include/asm-arm/arch-pxa/pcm027.h + * + * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de> + * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * Definitions of CPU card resources only + */ + +/* I2C RTC */ +#define PCM027_RTC_IRQ_GPIO 0 +#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO) +#define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING +#define ADR_PCM027_RTC 0x51 /* I2C address */ + +/* I2C EEPROM */ +#define ADR_PCM027_EEPROM 0x54 /* I2C address */ + +/* Ethernet chip (SMSC91C111) */ +#define PCM027_ETH_IRQ_GPIO 52 +#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO) +#define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING +#define PCM027_ETH_PHYS PXA_CS5_PHYS +#define PCM027_ETH_SIZE (1*1024*1024) + +/* CAN controller SJA1000 (unsupported yet) */ +#define PCM027_CAN_IRQ_GPIO 114 +#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO) +#define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING +#define PCM027_CAN_PHYS 0x22000000 +#define PCM027_CAN_SIZE 0x100 + +/* SPI GPIO expander (unsupported yet) */ +#define PCM027_EGPIO_IRQ_GPIO 27 +#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO) +#define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING +#define PCM027_EGPIO_CS 24 +/* + * TODO: Switch this pin from dedicated usage to GPIO if + * more than the MAX7301 device is connected to this SPI bus + */ +#define PCM027_EGPIO_CS_MODE GPIO24_SFRM_MD + +/* Flash memory */ +#define PCM027_FLASH_PHYS 0x00000000 +#define PCM027_FLASH_SIZE 0x02000000 + +/* onboard LEDs connected to GPIO */ +#define PCM027_LED_CPU 90 +#define PCM027_LED_HEARD_BEAT 91 + +/* + * This CPU module needs a baseboard to work. After basic initializing + * its own devices, it calls baseboard's init function. + * TODO: Add your own basebaord init function and call it from + * inside pcm027_init(). This example here is for the developmen board. + * Refer pcm990-baseboard.c + */ +extern void pcm990_baseboard_init(void); diff --git a/include/asm-arm/arch-pxa/pcm990_baseboard.h b/include/asm-arm/arch-pxa/pcm990_baseboard.h new file mode 100644 index 000000000000..b699d0d7bdb2 --- /dev/null +++ b/include/asm-arm/arch-pxa/pcm990_baseboard.h @@ -0,0 +1,275 @@ +/* + * include/asm-arm/arch-pxa/pcm990_baseboard.h + * + * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de> + * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <asm/arch/pcm027.h> + +/* + * definitions relevant only when the PCM-990 + * development base board is in use + */ + +/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */ +#define PCM990_CTRL_INT_IRQ_GPIO 9 +#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO) +#define PCM990_CTRL_INT_IRQ_EDGE IRQT_RISING +#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */ +#define PCM990_CTRL_BASE 0xea000000 +#define PCM990_CTRL_SIZE (1*1024*1024) + +#define PCM990_CTRL_PWR_IRQ_GPIO 14 +#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO) +#define PCM990_CTRL_PWR_IRQ_EDGE IRQT_RISING + +/* visible CPLD (U7) registers */ +#define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */ +#define PCM990_CTRL_SYSRES 0x0001 /* System RESET REGISTER */ +#define PCM990_CTRL_RESOUT 0x0002 /* RESETOUT Enable REGISTER */ +#define PCM990_CTRL_RESGPIO 0x0004 /* RESETGPIO Enable REGISTER */ + +#define PCM990_CTRL_REG1 0x0002 /* Power REGISTER */ +#define PCM990_CTRL_5VOFF 0x0001 /* Disable 5V Regulators */ +#define PCM990_CTRL_CANPWR 0x0004 /* Enable CANPWR ADUM */ +#define PCM990_CTRL_PM_5V 0x0008 /* Read 5V OK */ + +#define PCM990_CTRL_REG2 0x0004 /* LED REGISTER */ +#define PCM990_CTRL_LEDPWR 0x0001 /* POWER LED enable */ +#define PCM990_CTRL_LEDBAS 0x0002 /* BASIS LED enable */ +#define PCM990_CTRL_LEDUSR 0x0004 /* USER LED enable */ + +#define PCM990_CTRL_REG3 0x0006 /* LCD CTRL REGISTER 3 */ +#define PCM990_CTRL_LCDPWR 0x0001 /* RW LCD Power on */ +#define PCM990_CTRL_LCDON 0x0002 /* RW LCD Latch on */ +#define PCM990_CTRL_LCDPOS1 0x0004 /* RW POS 1 */ +#define PCM990_CTRL_LCDPOS2 0x0008 /* RW POS 2 */ + +#define PCM990_CTRL_REG4 0x0008 /* MMC1 CTRL REGISTER 4 */ +#define PCM990_CTRL_MMC1PWR 0x0001 /* RW MMC1 Power on */ + +#define PCM990_CTRL_REG5 0x000A /* MMC2 CTRL REGISTER 5 */ +#define PCM990_CTRL_MMC2PWR 0x0001 /* RW MMC2 Power on */ +#define PCM990_CTRL_MMC2LED 0x0002 /* RW MMC2 LED */ +#define PCM990_CTRL_MMC2DE 0x0004 /* R MMC2 Card detect */ +#define PCM990_CTRL_MMC2WP 0x0008 /* R MMC2 Card write protect */ + +#define PCM990_CTRL_REG6 0x000C /* Interrupt Clear REGISTER */ +#define PCM990_CTRL_INTC0 0x0001 /* Clear Reg BT Detect */ +#define PCM990_CTRL_INTC1 0x0002 /* Clear Reg FR RI */ +#define PCM990_CTRL_INTC2 0x0004 /* Clear Reg MMC1 Detect */ +#define PCM990_CTRL_INTC3 0x0008 /* Clear Reg PM_5V off */ + +#define PCM990_CTRL_REG7 0x000E /* Interrupt Enable REGISTER */ +#define PCM990_CTRL_ENAINT0 0x0001 /* Enable Int BT Detect */ +#define PCM990_CTRL_ENAINT1 0x0002 /* Enable Int FR RI */ +#define PCM990_CTRL_ENAINT2 0x0004 /* Enable Int MMC1 Detect */ +#define PCM990_CTRL_ENAINT3 0x0008 /* Enable Int PM_5V off */ + +#define PCM990_CTRL_REG8 0x0014 /* Uart REGISTER */ +#define PCM990_CTRL_FFSD 0x0001 /* BT Uart Enable */ +#define PCM990_CTRL_BTSD 0x0002 /* FF Uart Enable */ +#define PCM990_CTRL_FFRI 0x0004 /* FF Uart RI detect */ +#define PCM990_CTRL_BTRX 0x0008 /* BT Uart Rx detect */ + +#define PCM990_CTRL_REG9 0x0010 /* AC97 Flash REGISTER */ +#define PCM990_CTRL_FLWP 0x0001 /* pC Flash Write Protect */ +#define PCM990_CTRL_FLDIS 0x0002 /* pC Flash Disable */ +#define PCM990_CTRL_AC97ENA 0x0004 /* Enable AC97 Expansion */ + +#define PCM990_CTRL_REG10 0x0012 /* GPS-REGISTER */ +#define PCM990_CTRL_GPSPWR 0x0004 /* GPS-Modul Power on */ +#define PCM990_CTRL_GPSENA 0x0008 /* GPS-Modul Enable */ + +#define PCM990_CTRL_REG11 0x0014 /* Accu REGISTER */ +#define PCM990_CTRL_ACENA 0x0001 /* Charge Enable */ +#define PCM990_CTRL_ACSEL 0x0002 /* Charge Akku -> DC Enable */ +#define PCM990_CTRL_ACPRES 0x0004 /* DC Present */ +#define PCM990_CTRL_ACALARM 0x0008 /* Error Akku */ + +#define PCM990_CTRL_P2V(x) ((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE) +#define PCM990_CTRL_V2P(x) ((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS) + +#ifndef __ASSEMBLY__ +# define __PCM990_CTRL_REG(x) \ + (*((volatile unsigned char *)PCM990_CTRL_P2V(x))) +#else +# define __PCM990_CTRL_REG(x) PCM990_CTRL_P2V(x) +#endif + +#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) +#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) +#define PCM990_CTRL0 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0) +#define PCM990_CTRL1 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1) +#define PCM990_CTRL2 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2) +#define PCM990_CTRL3 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) +#define PCM990_CTRL4 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4) +#define PCM990_CTRL5 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) +#define PCM990_CTRL6 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) +#define PCM990_CTRL7 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) +#define PCM990_CTRL8 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8) +#define PCM990_CTRL9 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9) +#define PCM990_CTRL10 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10) +#define PCM990_CTRL11 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11) + + +/* + * IDE + */ +#define PCM990_IDE_IRQ_GPIO 13 +#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO) +#define PCM990_IDE_IRQ_EDGE IRQT_RISING +#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */ +#define PCM990_IDE_PLD_BASE 0xee000000 +#define PCM990_IDE_PLD_SIZE (1*1024*1024) + +/* visible CPLD (U6) registers */ +#define PCM990_IDE_PLD_REG0 0x1000 /* OFFSET IDE REGISTER 0 */ +#define PCM990_IDE_PM5V 0x0004 /* R System VCC_5V */ +#define PCM990_IDE_STBY 0x0008 /* R System StandBy */ + +#define PCM990_IDE_PLD_REG1 0x1002 /* OFFSET IDE REGISTER 1 */ +#define PCM990_IDE_IDEMODE 0x0001 /* R TrueIDE Mode */ +#define PCM990_IDE_DMAENA 0x0004 /* RW DMA Enable */ +#define PCM990_IDE_DMA1_0 0x0008 /* RW 1=DREQ1 0=DREQ0 */ + +#define PCM990_IDE_PLD_REG2 0x1004 /* OFFSET IDE REGISTER 2 */ +#define PCM990_IDE_RESENA 0x0001 /* RW IDE Reset Bit enable */ +#define PCM990_IDE_RES 0x0002 /* RW IDE Reset Bit */ +#define PCM990_IDE_RDY 0x0008 /* RDY */ + +#define PCM990_IDE_PLD_REG3 0x1006 /* OFFSET IDE REGISTER 3 */ +#define PCM990_IDE_IDEOE 0x0001 /* RW Latch on Databus */ +#define PCM990_IDE_IDEON 0x0002 /* RW Latch on Control Address */ +#define PCM990_IDE_IDEIN 0x0004 /* RW Latch on Interrupt usw. */ + +#define PCM990_IDE_PLD_REG4 0x1008 /* OFFSET IDE REGISTER 4 */ +#define PCM990_IDE_PWRENA 0x0001 /* RW IDE Power enable */ +#define PCM990_IDE_5V 0x0002 /* R IDE Power 5V */ +#define PCM990_IDE_PWG 0x0008 /* R IDE Power is on */ + +#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE) +#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS) + +#ifndef __ASSEMBLY__ +# define __PCM990_IDE_PLD_REG(x) \ + (*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x))) +#else +# define __PCM990_IDE_PLD_REG(x) PCM990_IDE_PLD_P2V(x) +#endif + +#define PCM990_IDE0 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0) +#define PCM990_IDE1 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1) +#define PCM990_IDE2 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2) +#define PCM990_IDE3 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3) +#define PCM990_IDE4 \ + __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4) + +/* + * Compact Flash + */ +#define PCM990_CF_IRQ_GPIO 11 +#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO) +#define PCM990_CF_IRQ_EDGE IRQT_RISING + +#define PCM990_CF_CD_GPIO 12 +#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO) +#define PCM990_CF_CD_EDGE IRQT_RISING + +#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */ +#define PCM990_CF_PLD_BASE 0xef000000 +#define PCM990_CF_PLD_SIZE (1*1024*1024) +#define PCM990_CF_PLD_P2V(x) ((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE) +#define PCM990_CF_PLD_V2P(x) ((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS) + +/* visible CPLD (U6) registers */ +#define PCM990_CF_PLD_REG0 0x1000 /* OFFSET CF REGISTER 0 */ +#define PCM990_CF_REG0_LED 0x0001 /* RW LED on */ +#define PCM990_CF_REG0_BLK 0x0002 /* RW LED flash when access */ +#define PCM990_CF_REG0_PM5V 0x0004 /* R System VCC_5V enable */ +#define PCM990_CF_REG0_STBY 0x0008 /* R System StandBy */ + +#define PCM990_CF_PLD_REG1 0x1002 /* OFFSET CF REGISTER 1 */ +#define PCM990_CF_REG1_IDEMODE 0x0001 /* RW CF card run as TrueIDE */ +#define PCM990_CF_REG1_CF0 0x0002 /* RW CF card at ADDR 0x28000000 */ + +#define PCM990_CF_PLD_REG2 0x1004 /* OFFSET CF REGISTER 2 */ +#define PCM990_CF_REG2_RES 0x0002 /* RW CF RESET BIT */ +#define PCM990_CF_REG2_RDYENA 0x0004 /* RW Enable CF_RDY */ +#define PCM990_CF_REG2_RDY 0x0008 /* R CF_RDY auf PWAIT */ + +#define PCM990_CF_PLD_REG3 0x1006 /* OFFSET CF REGISTER 3 */ +#define PCM990_CF_REG3_CFOE 0x0001 /* RW Latch on Databus */ +#define PCM990_CF_REG3_CFON 0x0002 /* RW Latch on Control Address */ +#define PCM990_CF_REG3_CFIN 0x0004 /* RW Latch on Interrupt usw. */ +#define PCM990_CF_REG3_CFCD 0x0008 /* RW Latch on CD1/2 VS1/2 usw */ + +#define PCM990_CF_PLD_REG4 0x1008 /* OFFSET CF REGISTER 4 */ +#define PCM990_CF_REG4_PWRENA 0x0001 /* RW CF Power on (CD1/2 = "00") */ +#define PCM990_CF_REG4_5_3V 0x0002 /* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */ +#define PCM990_CF_REG4_3B 0x0004 /* RW 3.0V Backup from VCC (5_3V=0) */ +#define PCM990_CF_REG4_PWG 0x0008 /* R CF-Power is on */ + +#define PCM990_CF_PLD_REG5 0x100A /* OFFSET CF REGISTER 5 */ +#define PCM990_CF_REG5_BVD1 0x0001 /* R CF /BVD1 */ +#define PCM990_CF_REG5_BVD2 0x0002 /* R CF /BVD2 */ +#define PCM990_CF_REG5_VS1 0x0004 /* R CF /VS1 */ +#define PCM990_CF_REG5_VS2 0x0008 /* R CF /VS2 */ + +#define PCM990_CF_PLD_REG6 0x100C /* OFFSET CF REGISTER 6 */ +#define PCM990_CF_REG6_CD1 0x0001 /* R CF Card_Detect1 */ +#define PCM990_CF_REG6_CD2 0x0002 /* R CF Card_Detect2 */ + +#ifndef __ASSEMBLY__ +# define __PCM990_CF_PLD_REG(x) \ + (*((volatile unsigned char *)PCM990_CF_PLD_P2V(x))) +#else +# define __PCM990_CF_PLD_REG(x) PCM990_CF_PLD_P2V(x) +#endif + +#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0) +#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1) +#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2) +#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3) +#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4) +#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5) +#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6) + +/* + * Wolfson AC97 Touch + */ +#define PCM990_AC97_IRQ_GPIO 10 +#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO) +#define PCM990_AC97_IRQ_EDGE IRQT_RISING + +/* + * MMC phyCORE + */ +#define PCM990_MMC0_IRQ_GPIO 9 +#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO) +#define PCM990_MMC0_IRQ_EDGE IRQT_FALLING + +/* + * USB phyCore + */ +#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN) +#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT) diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 1bd398da07da..442494d71f12 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1597,176 +1597,10 @@ #define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ #define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ - /* - * SSP Serial Port Registers - * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different. - * PXA255, PXA26x and PXA27x have extra ports, registers and bits. + * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h */ - /* Common PXA2xx bits first */ -#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ -#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ -#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ -#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ -#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ -#define SSCR0_National (0x2 << 4) /* National Microwire */ -#define SSCR0_ECS (1 << 6) /* External clock select */ -#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ -#if defined(CONFIG_PXA25x) -#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ -#elif defined(CONFIG_PXA27x) -#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ -#define SSCR0_EDSS (1 << 20) /* Extended data size select */ -#define SSCR0_NCS (1 << 21) /* Network clock select */ -#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ -#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ -#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ -#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ -#define SSCR0_ADC (1 << 30) /* Audio clock select */ -#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ -#endif - -#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ -#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ -#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ -#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ -#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ -#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ -#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ -#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ -#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ -#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ - -#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ -#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ -#define SSSR_BSY (1 << 4) /* SSP Busy */ -#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ -#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ -#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ - -#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */ -#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */ -#define SSCR0_NCS (1 << 21) /* Network Clock Select */ -#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ - -/* extra bits in PXA255, PXA26x and PXA27x SSP ports */ -#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ -#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ -#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ -#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ -#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */ -#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */ -#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */ -#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */ -#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */ -#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */ -#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */ -#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */ -#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ -#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ -#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ -#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */ -#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ -#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ - -#define SSSR_BCE (1 << 23) /* Bit Count Error */ -#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */ -#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */ -#define SSSR_EOC (1 << 20) /* End Of Chain */ -#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ -#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ - -#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ -#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ -#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ -#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ -#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ -#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ -#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ -#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ -#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ - -#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ -#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ -#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ - -#define SSCR0_P1 __REG(0x41000000) /* SSP Port 1 Control Register 0 */ -#define SSCR1_P1 __REG(0x41000004) /* SSP Port 1 Control Register 1 */ -#define SSSR_P1 __REG(0x41000008) /* SSP Port 1 Status Register */ -#define SSITR_P1 __REG(0x4100000C) /* SSP Port 1 Interrupt Test Register */ -#define SSDR_P1 __REG(0x41000010) /* (Write / Read) SSP Port 1 Data Write Register/SSP Data Read Register */ - -/* Support existing PXA25x drivers */ -#define SSCR0 SSCR0_P1 /* SSP Control Register 0 */ -#define SSCR1 SSCR1_P1 /* SSP Control Register 1 */ -#define SSSR SSSR_P1 /* SSP Status Register */ -#define SSITR SSITR_P1 /* SSP Interrupt Test Register */ -#define SSDR SSDR_P1 /* (Write / Read) SSP Data Write Register/SSP Data Read Register */ - -/* PXA27x ports */ -#if defined (CONFIG_PXA27x) -#define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */ -#define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */ -#define SSTSA_P1 __REG(0x41000030) /* SSP Port 1 Tx Timeslot Active */ -#define SSRSA_P1 __REG(0x41000034) /* SSP Port 1 Rx Timeslot Active */ -#define SSTSS_P1 __REG(0x41000038) /* SSP Port 1 Timeslot Status */ -#define SSACD_P1 __REG(0x4100003C) /* SSP Port 1 Audio Clock Divider */ -#define SSCR0_P2 __REG(0x41700000) /* SSP Port 2 Control Register 0 */ -#define SSCR1_P2 __REG(0x41700004) /* SSP Port 2 Control Register 1 */ -#define SSSR_P2 __REG(0x41700008) /* SSP Port 2 Status Register */ -#define SSITR_P2 __REG(0x4170000C) /* SSP Port 2 Interrupt Test Register */ -#define SSDR_P2 __REG(0x41700010) /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */ -#define SSTO_P2 __REG(0x41700028) /* SSP Port 2 Time Out Register */ -#define SSPSP_P2 __REG(0x4170002C) /* SSP Port 2 Programmable Serial Protocol */ -#define SSTSA_P2 __REG(0x41700030) /* SSP Port 2 Tx Timeslot Active */ -#define SSRSA_P2 __REG(0x41700034) /* SSP Port 2 Rx Timeslot Active */ -#define SSTSS_P2 __REG(0x41700038) /* SSP Port 2 Timeslot Status */ -#define SSACD_P2 __REG(0x4170003C) /* SSP Port 2 Audio Clock Divider */ -#define SSCR0_P3 __REG(0x41900000) /* SSP Port 3 Control Register 0 */ -#define SSCR1_P3 __REG(0x41900004) /* SSP Port 3 Control Register 1 */ -#define SSSR_P3 __REG(0x41900008) /* SSP Port 3 Status Register */ -#define SSITR_P3 __REG(0x4190000C) /* SSP Port 3 Interrupt Test Register */ -#define SSDR_P3 __REG(0x41900010) /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */ -#define SSTO_P3 __REG(0x41900028) /* SSP Port 3 Time Out Register */ -#define SSPSP_P3 __REG(0x4190002C) /* SSP Port 3 Programmable Serial Protocol */ -#define SSTSA_P3 __REG(0x41900030) /* SSP Port 3 Tx Timeslot Active */ -#define SSRSA_P3 __REG(0x41900034) /* SSP Port 3 Rx Timeslot Active */ -#define SSTSS_P3 __REG(0x41900038) /* SSP Port 3 Timeslot Status */ -#define SSACD_P3 __REG(0x4190003C) /* SSP Port 3 Audio Clock Divider */ -#else /* PXA255 (only port 2) and PXA26x ports*/ -#define SSTO_P1 __REG(0x41000028) /* SSP Port 1 Time Out Register */ -#define SSPSP_P1 __REG(0x4100002C) /* SSP Port 1 Programmable Serial Protocol */ -#define SSCR0_P2 __REG(0x41400000) /* SSP Port 2 Control Register 0 */ -#define SSCR1_P2 __REG(0x41400004) /* SSP Port 2 Control Register 1 */ -#define SSSR_P2 __REG(0x41400008) /* SSP Port 2 Status Register */ -#define SSITR_P2 __REG(0x4140000C) /* SSP Port 2 Interrupt Test Register */ -#define SSDR_P2 __REG(0x41400010) /* (Write / Read) SSP Port 2 Data Write Register/SSP Data Read Register */ -#define SSTO_P2 __REG(0x41400028) /* SSP Port 2 Time Out Register */ -#define SSPSP_P2 __REG(0x4140002C) /* SSP Port 2 Programmable Serial Protocol */ -#define SSCR0_P3 __REG(0x41500000) /* SSP Port 3 Control Register 0 */ -#define SSCR1_P3 __REG(0x41500004) /* SSP Port 3 Control Register 1 */ -#define SSSR_P3 __REG(0x41500008) /* SSP Port 3 Status Register */ -#define SSITR_P3 __REG(0x4150000C) /* SSP Port 3 Interrupt Test Register */ -#define SSDR_P3 __REG(0x41500010) /* (Write / Read) SSP Port 3 Data Write Register/SSP Data Read Register */ -#define SSTO_P3 __REG(0x41500028) /* SSP Port 3 Time Out Register */ -#define SSPSP_P3 __REG(0x4150002C) /* SSP Port 3 Programmable Serial Protocol */ -#endif - -#define SSCR0_P(x) (*(((x) == 1) ? &SSCR0_P1 : ((x) == 2) ? &SSCR0_P2 : ((x) == 3) ? &SSCR0_P3 : NULL)) -#define SSCR1_P(x) (*(((x) == 1) ? &SSCR1_P1 : ((x) == 2) ? &SSCR1_P2 : ((x) == 3) ? &SSCR1_P3 : NULL)) -#define SSSR_P(x) (*(((x) == 1) ? &SSSR_P1 : ((x) == 2) ? &SSSR_P2 : ((x) == 3) ? &SSSR_P3 : NULL)) -#define SSITR_P(x) (*(((x) == 1) ? &SSITR_P1 : ((x) == 2) ? &SSITR_P2 : ((x) == 3) ? &SSITR_P3 : NULL)) -#define SSDR_P(x) (*(((x) == 1) ? &SSDR_P1 : ((x) == 2) ? &SSDR_P2 : ((x) == 3) ? &SSDR_P3 : NULL)) -#define SSTO_P(x) (*(((x) == 1) ? &SSTO_P1 : ((x) == 2) ? &SSTO_P2 : ((x) == 3) ? &SSTO_P3 : NULL)) -#define SSPSP_P(x) (*(((x) == 1) ? &SSPSP_P1 : ((x) == 2) ? &SSPSP_P2 : ((x) == 3) ? &SSPSP_P3 : NULL)) -#define SSTSA_P(x) (*(((x) == 1) ? &SSTSA_P1 : ((x) == 2) ? &SSTSA_P2 : ((x) == 3) ? &SSTSA_P3 : NULL)) -#define SSRSA_P(x) (*(((x) == 1) ? &SSRSA_P1 : ((x) == 2) ? &SSRSA_P2 : ((x) == 3) ? &SSRSA_P3 : NULL)) -#define SSTSS_P(x) (*(((x) == 1) ? &SSTSS_P1 : ((x) == 2) ? &SSTSS_P2 : ((x) == 3) ? &SSTSS_P3 : NULL)) -#define SSACD_P(x) (*(((x) == 1) ? &SSACD_P1 : ((x) == 2) ? &SSACD_P2 : ((x) == 3) ? &SSACD_P3 : NULL)) - /* * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h */ @@ -2014,71 +1848,8 @@ #define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ -/* - * Memory controller - */ - -#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ -#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ -#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ -#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ -#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ -#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ -#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ -#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ -#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ -#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ -#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ -#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ -#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ -#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ -#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ -#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ -#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ - -/* - * More handy macros for PCMCIA - * - * Arg is socket number - */ -#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */ -#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */ -#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */ - -/* MECR register defines */ -#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */ -#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */ - -#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */ -#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ -#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ -#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ -#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */ -#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */ -#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */ -#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */ -#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */ -#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */ -#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */ -#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ -#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ -#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ - - #ifdef CONFIG_PXA27x -#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ - -#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ -#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ -#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ -#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ -#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ -#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ -#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ -#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ -#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ - /* * Keypad */ @@ -2135,74 +1906,6 @@ #define KPAS_SO (0x1 << 31) #define KPASMKPx_SO (0x1 << 31) -/* - * UHC: USB Host Controller (OHCI-like) register definitions - */ -#define UHC_BASE_PHYS (0x4C000000) -#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */ -#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */ -#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */ -#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */ -#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */ -#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */ -#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */ -#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */ -#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */ -#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */ -#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */ -#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */ -#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */ -#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */ -#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */ -#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ -#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ -#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ - -#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ -#define UHCRHDA_NOCP (1 << 12) /* No over current protection */ - -#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ -#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ -#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ -#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */ -#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */ - -#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */ -#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ -#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ -#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ -#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ -#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ -#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ -#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ -#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ -#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ - -#define UHCHR __REG(0x4C000064) /* UHC Reset Register */ -#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ -#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ -#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ -#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ -#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ -#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ -#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ -#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ -#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ -#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ -#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ - -#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/ -#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ -#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ -#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ -#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ -#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort - Interrupt Enable*/ -#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ -#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ - -#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */ - /* Camera Interface */ #define CICR0 __REG(0x50000000) #define CICR1 __REG(0x50000004) @@ -2350,6 +2053,77 @@ #endif +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) +/* + * UHC: USB Host Controller (OHCI-like) register definitions + */ +#define UHC_BASE_PHYS (0x4C000000) +#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */ +#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */ +#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */ +#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */ +#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */ +#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */ +#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */ +#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */ +#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */ +#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */ +#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */ +#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */ +#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */ +#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */ +#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */ +#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ +#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ +#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ + +#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ +#define UHCRHDA_NOCP (1 << 12) /* No over current protection */ + +#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ +#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ +#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ +#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */ +#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */ + +#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */ +#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ +#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ +#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ +#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ +#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ +#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ +#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ +#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ +#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ + +#define UHCHR __REG(0x4C000064) /* UHC Reset Register */ +#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ +#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ +#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ +#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ +#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ +#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ +#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ +#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ +#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ +#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ +#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ + +#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/ +#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ +#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ +#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ +#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ +#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort + Interrupt Enable*/ +#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ +#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ + +#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */ + +#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ + /* PWRMODE register M field values */ #define PWRMODE_IDLE 0x1 diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/include/asm-arm/arch-pxa/pxa2xx-regs.h new file mode 100644 index 000000000000..9553b54fa5bc --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa2xx-regs.h @@ -0,0 +1,84 @@ +/* + * linux/include/asm-arm/arch-pxa/pxa2xx-regs.h + * + * Taken from pxa-regs.h by Russell King + * + * Author: Nicolas Pitre + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PXA2XX_REGS_H +#define __PXA2XX_REGS_H + +/* + * Memory controller + */ + +#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ +#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ +#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ +#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ +#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ +#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ +#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ +#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ +#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ +#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ +#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ +#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ +#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ +#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ +#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ +#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ +#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ + +/* + * More handy macros for PCMCIA + * + * Arg is socket number + */ +#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */ +#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */ +#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */ + +/* MECR register defines */ +#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */ +#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */ + +#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */ +#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ +#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ +#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ +#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */ +#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */ +#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */ +#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */ +#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */ +#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */ +#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */ +#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ +#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ +#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ + + +#ifdef CONFIG_PXA27x + +#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ + +#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ +#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ +#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ +#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ +#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ +#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ +#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ +#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ +#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ + +#endif + +#endif diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h index acc7ec7a84a1..3459fb26ce97 100644 --- a/include/asm-arm/arch-pxa/pxa2xx_spi.h +++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h @@ -22,32 +22,8 @@ #define PXA2XX_CS_ASSERT (0x01) #define PXA2XX_CS_DEASSERT (0x02) -#if defined(CONFIG_PXA25x) -#define CLOCK_SPEED_HZ 3686400 -#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00) -#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#elif defined(CONFIG_PXA27x) -#define CLOCK_SPEED_HZ 13000000 -#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#endif - -#define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1))))) -#define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2))))) -#define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3))))) - -enum pxa_ssp_type { - SSP_UNDEFINED = 0, - PXA25x_SSP, /* pxa 210, 250, 255, 26x */ - PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ - PXA27x_SSP, -}; - /* device.platform_data for SSP controller devices */ struct pxa2xx_spi_master { - enum pxa_ssp_type ssp_type; u32 clock_enable; u16 num_chipselect; u8 enable_dma; diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h index 3900a0ca0bc0..66d54119757c 100644 --- a/include/asm-arm/arch-pxa/pxa3xx-regs.h +++ b/include/asm-arm/arch-pxa/pxa3xx-regs.h @@ -14,6 +14,92 @@ #define __ASM_ARCH_PXA3XX_REGS_H /* + * Slave Power Managment Unit + */ +#define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ +#define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ +#define AD3ER __REG(0x40f40008) /* Application Subsystem Wake-Up from D3 Enable */ +#define AD3SR __REG(0x40f4000c) /* Application Subsystem Wake-Up from D3 Status */ +#define AD2D0ER __REG(0x40f40010) /* Application Subsystem Wake-Up from D2 to D0 Enable */ +#define AD2D0SR __REG(0x40f40014) /* Application Subsystem Wake-Up from D2 to D0 Status */ +#define AD2D1ER __REG(0x40f40018) /* Application Subsystem Wake-Up from D2 to D1 Enable */ +#define AD2D1SR __REG(0x40f4001c) /* Application Subsystem Wake-Up from D2 to D1 Status */ +#define AD1D0ER __REG(0x40f40020) /* Application Subsystem Wake-Up from D1 to D0 Enable */ +#define AD1D0SR __REG(0x40f40024) /* Application Subsystem Wake-Up from D1 to D0 Status */ +#define AGENP __REG(0x40f4002c) /* Application Subsystem General Purpose */ +#define AD3R __REG(0x40f40030) /* Application Subsystem D3 Configuration */ +#define AD2R __REG(0x40f40034) /* Application Subsystem D2 Configuration */ +#define AD1R __REG(0x40f40038) /* Application Subsystem D1 Configuration */ + +/* + * Application Subsystem Configuration bits. + */ +#define ASCR_RDH (1 << 31) +#define ASCR_D1S (1 << 2) +#define ASCR_D2S (1 << 1) +#define ASCR_D3S (1 << 0) + +/* + * Application Reset Status bits. + */ +#define ARSR_GPR (1 << 3) +#define ARSR_LPMR (1 << 2) +#define ARSR_WDT (1 << 1) +#define ARSR_HWR (1 << 0) + +/* + * Application Subsystem Wake-Up bits. + */ +#define ADXER_WRTC (1 << 31) /* RTC */ +#define ADXER_WOST (1 << 30) /* OS Timer */ +#define ADXER_WTSI (1 << 29) /* Touchscreen */ +#define ADXER_WUSBH (1 << 28) /* USB host */ +#define ADXER_WUSB2 (1 << 26) /* USB client 2.0 */ +#define ADXER_WMSL0 (1 << 24) /* MSL port 0*/ +#define ADXER_WDMUX3 (1 << 23) /* USB EDMUX3 */ +#define ADXER_WDMUX2 (1 << 22) /* USB EDMUX2 */ +#define ADXER_WKP (1 << 21) /* Keypad */ +#define ADXER_WUSIM1 (1 << 20) /* USIM Port 1 */ +#define ADXER_WUSIM0 (1 << 19) /* USIM Port 0 */ +#define ADXER_WOTG (1 << 16) /* USBOTG input */ +#define ADXER_MFP_WFLASH (1 << 15) /* MFP: Data flash busy */ +#define ADXER_MFP_GEN12 (1 << 14) /* MFP: MMC3/GPIO/OST inputs */ +#define ADXER_MFP_WMMC2 (1 << 13) /* MFP: MMC2 */ +#define ADXER_MFP_WMMC1 (1 << 12) /* MFP: MMC1 */ +#define ADXER_MFP_WI2C (1 << 11) /* MFP: I2C */ +#define ADXER_MFP_WSSP4 (1 << 10) /* MFP: SSP4 */ +#define ADXER_MFP_WSSP3 (1 << 9) /* MFP: SSP3 */ +#define ADXER_MFP_WMAXTRIX (1 << 8) /* MFP: matrix keypad */ +#define ADXER_MFP_WUART3 (1 << 7) /* MFP: UART3 */ +#define ADXER_MFP_WUART2 (1 << 6) /* MFP: UART2 */ +#define ADXER_MFP_WUART1 (1 << 5) /* MFP: UART1 */ +#define ADXER_MFP_WSSP2 (1 << 4) /* MFP: SSP2 */ +#define ADXER_MFP_WSSP1 (1 << 3) /* MFP: SSP1 */ +#define ADXER_MFP_WAC97 (1 << 2) /* MFP: AC97 */ +#define ADXER_WEXTWAKE1 (1 << 1) /* External Wake 1 */ +#define ADXER_WEXTWAKE0 (1 << 0) /* External Wake 0 */ + +/* + * AD3R/AD2R/AD1R bits. R2-R5 are only defined for PXA320. + */ +#define ADXR_L2 (1 << 8) +#define ADXR_R5 (1 << 5) +#define ADXR_R4 (1 << 4) +#define ADXR_R3 (1 << 3) +#define ADXR_R2 (1 << 2) +#define ADXR_R1 (1 << 1) +#define ADXR_R0 (1 << 0) + +/* + * Values for PWRMODE CP15 register + */ +#define PXA3xx_PM_S3D4C4 0x07 /* aka deep sleep */ +#define PXA3xx_PM_S2D3C4 0x06 /* aka sleep */ +#define PXA3xx_PM_S0D2C2 0x03 /* aka standby */ +#define PXA3xx_PM_S0D1C2 0x02 /* aka LCD refresh */ +#define PXA3xx_PM_S0D0C1 0x01 + +/* * Application Subsystem Clock */ #define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/include/asm-arm/arch-pxa/regs-ssp.h new file mode 100644 index 000000000000..991cb688db75 --- /dev/null +++ b/include/asm-arm/arch-pxa/regs-ssp.h @@ -0,0 +1,112 @@ +#ifndef __ASM_ARCH_REGS_SSP_H +#define __ASM_ARCH_REGS_SSP_H + +/* + * SSP Serial Port Registers + * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different. + * PXA255, PXA26x and PXA27x have extra ports, registers and bits. + */ + +#define SSCR0 (0x00) /* SSP Control Register 0 */ +#define SSCR1 (0x04) /* SSP Control Register 1 */ +#define SSSR (0x08) /* SSP Status Register */ +#define SSITR (0x0C) /* SSP Interrupt Test Register */ +#define SSDR (0x10) /* SSP Data Write/Data Read Register */ + +#define SSTO (0x28) /* SSP Time Out Register */ +#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */ +#define SSTSA (0x30) /* SSP Tx Timeslot Active */ +#define SSRSA (0x34) /* SSP Rx Timeslot Active */ +#define SSTSS (0x38) /* SSP Timeslot Status */ +#define SSACD (0x3C) /* SSP Audio Clock Divider */ + +/* Common PXA2xx bits first */ +#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ +#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ +#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ +#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ +#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ +#define SSCR0_National (0x2 << 4) /* National Microwire */ +#define SSCR0_ECS (1 << 6) /* External clock select */ +#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ +#if defined(CONFIG_PXA25x) +#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ +#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ +#elif defined(CONFIG_PXA27x) +#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ +#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ +#define SSCR0_EDSS (1 << 20) /* Extended data size select */ +#define SSCR0_NCS (1 << 21) /* Network clock select */ +#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ +#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ +#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ +#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ +#define SSCR0_ADC (1 << 30) /* Audio clock select */ +#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ +#endif + +#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ +#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ +#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ +#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ +#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ +#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ +#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ +#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ +#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ +#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ + +#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ +#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ +#define SSSR_BSY (1 << 4) /* SSP Busy */ +#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ +#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ +#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ + +#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */ +#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */ +#define SSCR0_NCS (1 << 21) /* Network Clock Select */ +#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ + +/* extra bits in PXA255, PXA26x and PXA27x SSP ports */ +#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ +#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ +#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ +#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ +#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */ +#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */ +#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */ +#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */ +#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */ +#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */ +#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */ +#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */ +#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ +#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ +#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ +#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */ +#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ +#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ + +#define SSSR_BCE (1 << 23) /* Bit Count Error */ +#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */ +#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */ +#define SSSR_EOC (1 << 20) /* End Of Chain */ +#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ +#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ + +#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ +#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ +#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ +#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ +#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ +#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ +#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ +#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ +#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ + +#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ +#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ +#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ + +#endif /* __ASM_ARCH_REGS_SSP_H */ diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/include/asm-arm/arch-pxa/sharpsl.h index 2b0fe773213a..3b1d4a72d4d1 100644 --- a/include/asm-arm/arch-pxa/sharpsl.h +++ b/include/asm-arm/arch-pxa/sharpsl.h @@ -16,7 +16,7 @@ int corgi_ssp_max1111_get(unsigned long data); */ struct corgits_machinfo { - unsigned long (*get_hsync_len)(void); + unsigned long (*get_hsync_invperiod)(void); void (*put_hsync)(void); void (*wait_hsync)(void); }; diff --git a/include/asm-arm/arch-pxa/spitz.h b/include/asm-arm/arch-pxa/spitz.h index 4953dd324d4d..bd14365f7ed5 100644 --- a/include/asm-arm/arch-pxa/spitz.h +++ b/include/asm-arm/arch-pxa/spitz.h @@ -156,5 +156,3 @@ extern struct platform_device spitzscoop_device; extern struct platform_device spitzscoop2_device; extern struct platform_device spitzssp_device; extern struct sharpsl_charger_machinfo spitz_pm_machinfo; - -extern void spitz_lcd_power(int on, struct fb_var_screeninfo *var); diff --git a/include/asm-arm/arch-pxa/ssp.h b/include/asm-arm/arch-pxa/ssp.h index ea200551a75f..a012882c9ee6 100644 --- a/include/asm-arm/arch-pxa/ssp.h +++ b/include/asm-arm/arch-pxa/ssp.h @@ -13,10 +13,37 @@ * PXA255 SSP, NSSP * PXA26x SSP, NSSP, ASSP * PXA27x SSP1, SSP2, SSP3 + * PXA3xx SSP1, SSP2, SSP3, SSP4 */ -#ifndef SSP_H -#define SSP_H +#ifndef __ASM_ARCH_SSP_H +#define __ASM_ARCH_SSP_H + +#include <linux/list.h> + +enum pxa_ssp_type { + SSP_UNDEFINED = 0, + PXA25x_SSP, /* pxa 210, 250, 255, 26x */ + PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ + PXA27x_SSP, +}; + +struct ssp_device { + struct platform_device *pdev; + struct list_head node; + + struct clk *clk; + void __iomem *mmio_base; + unsigned long phys_base; + + const char *label; + int port_id; + int type; + int use_count; + int irq; + int drcmr_rx; + int drcmr_tx; +}; /* * SSP initialisation flags @@ -31,6 +58,7 @@ struct ssp_state { }; struct ssp_dev { + struct ssp_device *ssp; u32 port; u32 mode; u32 flags; @@ -50,4 +78,6 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags); int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed); void ssp_exit(struct ssp_dev *dev); -#endif +struct ssp_device *ssp_request(int port, const char *label); +void ssp_free(struct ssp_device *); +#endif /* __ASM_ARCH_SSP_H */ diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h index 178aa2e073ac..dadf4c20b622 100644 --- a/include/asm-arm/arch-pxa/uncompress.h +++ b/include/asm-arm/arch-pxa/uncompress.h @@ -9,19 +9,21 @@ * published by the Free Software Foundation. */ -#define FFUART ((volatile unsigned long *)0x40100000) -#define BTUART ((volatile unsigned long *)0x40200000) -#define STUART ((volatile unsigned long *)0x40700000) -#define HWUART ((volatile unsigned long *)0x41600000) +#include <linux/serial_reg.h> +#include <asm/arch/pxa-regs.h> + +#define __REG(x) ((volatile unsigned long *)x) #define UART FFUART static inline void putc(char c) { - while (!(UART[5] & 0x20)) + if (!(UART[UART_IER] & IER_UUE)) + return; + while (!(UART[UART_LSR] & LSR_TDRQ)) barrier(); - UART[0] = c; + UART[UART_TX] = c; } /* diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h index f58b59162b82..5f717d64ea7d 100644 --- a/include/asm-arm/arch-pxa/zylonite.h +++ b/include/asm-arm/arch-pxa/zylonite.h @@ -3,9 +3,18 @@ #define ZYLONITE_ETH_PHYS 0x14000000 +#define EXT_GPIO(x) (128 + (x)) + /* the following variables are processor specific and initialized * by the corresponding zylonite_pxa3xx_init() */ +struct platform_mmc_slot { + int gpio_cd; + int gpio_wp; +}; + +extern struct platform_mmc_slot zylonite_mmc_slot[]; + extern int gpio_backlight; extern int gpio_eth_irq; |
