diff options
113 files changed, 1409 insertions, 858 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index ffa4d6c55dc7..9d3a0775a11d 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -55,14 +55,6 @@ Who: Mauro Carvalho Chehab <mchehab@brturbo.com.br> --------------------------- -What: remove EXPORT_SYMBOL(insert_resource) -When: April 2006 -Files: kernel/resource.c -Why: No modular usage in the kernel. -Who: Adrian Bunk <bunk@stusta.de> - ---------------------------- - What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl]) When: November 2005 Files: drivers/pcmcia/: pcmcia_ioctl.c diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt index f001cd93b79b..02b0f7beb6d1 100644 --- a/Documentation/usb/usb-serial.txt +++ b/Documentation/usb/usb-serial.txt @@ -399,10 +399,10 @@ REINER SCT cyberJack pinpad/e-com USB chipcard reader Prolific PL2303 Driver - This driver support any device that has the PL2303 chip from Prolific + This driver supports any device that has the PL2303 chip from Prolific in it. This includes a number of single port USB to serial converters and USB GPS devices. Devices from Aten (the UC-232) and - IO-Data work with this driver. + IO-Data work with this driver, as does the DCU-11 mobile-phone cable. For any questions or problems with this driver, please contact Greg Kroah-Hartman at greg@kroah.com diff --git a/MAINTAINERS b/MAINTAINERS index d4bc2939fd14..5276d52c3fc5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3180,7 +3180,6 @@ S: Maintained W1 DALLAS'S 1-WIRE BUS P: Evgeniy Polyakov M: johnpol@2ka.mipt.ru -L: lm-sensors@lm-sensors.org S: Maintained W83791D HARDWARE MONITORING DRIVER diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index c624b61e1104..0a362e3aeac5 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -17,10 +17,6 @@ #include "pci.h" -#ifdef CONFIG_PCI_BIOS -extern void pcibios_sort(void); -#endif - unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | PCI_PROBE_MMCONF; diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index 12bf3d8dda29..bf4e79335388 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -84,4 +84,4 @@ extern int pci_conf1_read(unsigned int seg, unsigned int bus, extern void pci_direct_init(void); extern void pci_pcbios_init(void); extern void pci_mmcfg_init(void); - +extern void pcibios_sort(void); diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 47dfde95b8f8..b7d1514cd199 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -36,7 +36,6 @@ #include <linux/delay.h> #include <linux/workqueue.h> #include <linux/nmi.h> -#include <linux/kthread.h> #include <acpi/acpi.h> #include <asm/io.h> #include <acpi/acpi_bus.h> @@ -583,16 +582,6 @@ static void acpi_os_execute_deferred(void *context) return; } -static int acpi_os_execute_thread(void *context) -{ - struct acpi_os_dpc *dpc = (struct acpi_os_dpc *)context; - if (dpc) { - dpc->function(dpc->context); - kfree(dpc); - } - do_exit(0); -} - /******************************************************************************* * * FUNCTION: acpi_os_execute @@ -614,10 +603,16 @@ acpi_status acpi_os_execute(acpi_execute_type type, acpi_status status = AE_OK; struct acpi_os_dpc *dpc; struct work_struct *task; - struct task_struct *p; + + ACPI_FUNCTION_TRACE("os_queue_for_execution"); + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "Scheduling function [%p(%p)] for deferred execution.\n", + function, context)); if (!function) - return AE_BAD_PARAMETER; + return_ACPI_STATUS(AE_BAD_PARAMETER); + /* * Allocate/initialize DPC structure. Note that this memory will be * freed by the callee. The kernel handles the tq_struct list in a @@ -628,34 +623,27 @@ acpi_status acpi_os_execute(acpi_execute_type type, * We can save time and code by allocating the DPC and tq_structs * from the same memory. */ - if (type == OSL_NOTIFY_HANDLER) { - dpc = kmalloc(sizeof(struct acpi_os_dpc), GFP_KERNEL); - } else { - dpc = kmalloc(sizeof(struct acpi_os_dpc) + - sizeof(struct work_struct), GFP_ATOMIC); - } + + dpc = + kmalloc(sizeof(struct acpi_os_dpc) + sizeof(struct work_struct), + GFP_ATOMIC); if (!dpc) - return AE_NO_MEMORY; + return_ACPI_STATUS(AE_NO_MEMORY); + dpc->function = function; dpc->context = context; - if (type == OSL_NOTIFY_HANDLER) { - p = kthread_create(acpi_os_execute_thread, dpc, "kacpid_notify"); - if (!IS_ERR(p)) { - wake_up_process(p); - } else { - status = AE_NO_MEMORY; - kfree(dpc); - } - } else { - task = (void *)(dpc + 1); - INIT_WORK(task, acpi_os_execute_deferred, (void *)dpc); - if (!queue_work(kacpid_wq, task)) { - status = AE_ERROR; - kfree(dpc); - } + task = (void *)(dpc + 1); + INIT_WORK(task, acpi_os_execute_deferred, (void *)dpc); + + if (!queue_work(kacpid_wq, task)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Call to queue_work() failed.\n")); + kfree(dpc); + status = AE_ERROR; } - return status; + + return_ACPI_STATUS(status); } EXPORT_SYMBOL(acpi_os_execute); diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 83fa8b291a59..2e954d07175a 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -129,7 +129,7 @@ static struct kobj_type ktype_bus = { }; -decl_subsys(bus, &ktype_bus, NULL); +static decl_subsys(bus, &ktype_bus, NULL); #ifdef CONFIG_HOTPLUG @@ -598,12 +598,13 @@ void put_bus(struct bus_type * bus) * * Note that kset_find_obj increments bus' reference count. */ - +#if 0 struct bus_type * find_bus(char * name) { struct kobject * k = kset_find_obj(&bus_subsys.kset, name); return k ? to_bus(k) : NULL; } +#endif /* 0 */ /** diff --git a/drivers/base/core.c b/drivers/base/core.c index b21f864c9ce8..be6b5bc0677d 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -559,20 +559,20 @@ static void device_create_release(struct device *dev) /** * device_create - creates a device and registers it with sysfs - * @cs: pointer to the struct class that this device should be registered to. - * @parent: pointer to the parent struct device of this new device, if any. - * @dev: the dev_t for the char device to be added. - * @fmt: string for the class device's name + * @class: pointer to the struct class that this device should be registered to + * @parent: pointer to the parent struct device of this new device, if any + * @devt: the dev_t for the char device to be added + * @fmt: string for the device's name + * + * This function can be used by char device classes. A struct device + * will be created in sysfs, registered to the specified class. * - * This function can be used by char device classes. A struct - * device will be created in sysfs, registered to the specified - * class. * A "dev" file will be created, showing the dev_t for the device, if * the dev_t is not 0,0. - * If a pointer to a parent struct device is passed in, the newly - * created struct device will be a child of that device in sysfs. The - * pointer to the struct device will be returned from the call. Any - * further sysfs files that might be required can be created using this + * If a pointer to a parent struct device is passed in, the newly created + * struct device will be a child of that device in sysfs. + * The pointer to the struct device will be returned from the call. + * Any further sysfs files that might be required can be created using this * pointer. * * Note: the struct class passed to this function must have previously @@ -620,11 +620,11 @@ EXPORT_SYMBOL_GPL(device_create); /** * device_destroy - removes a device that was created with device_create() - * @class: the pointer to the struct class that this device was registered * with. - * @dev: the dev_t of the device that was previously registered. + * @class: pointer to the struct class that this device was registered with + * @devt: the dev_t of the device that was previously registered * - * This call unregisters and cleans up a class device that was created with a - * call to class_device_create() + * This call unregisters and cleans up a device that was created with a + * call to device_create(). */ void device_destroy(struct class *class, dev_t devt) { diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index b7e459e4f284..602797a44208 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -146,16 +146,7 @@ static void ide_detach(struct pcmcia_device *link) kfree(link->priv); } /* ide_detach */ -static void idecs_mmio_fixup(ide_hwif_t *hwif) -{ - default_hwif_mmiops(hwif); - hwif->mmio = 2; - - ide_undecoded_slave(hwif); -} - -static int idecs_register(unsigned long io, unsigned long ctl, - unsigned long irq, struct pcmcia_device *handle, int is_mmio) +static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle) { hw_regs_t hw; memset(&hw, 0, sizeof(hw)); @@ -163,19 +154,7 @@ static int idecs_register(unsigned long io, unsigned long ctl, hw.irq = irq; hw.chipset = ide_pci; hw.dev = &handle->dev; - - if(is_mmio) - return ide_register_hw_with_fixup(&hw, NULL, idecs_mmio_fixup); - else - return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave); -} - -void outb_io(unsigned char value, unsigned long port) { - outb(value, port); -} - -void outb_mem(unsigned char value, unsigned long port) { - writeb(value, (void __iomem *) port); + return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave); } /*====================================================================== @@ -201,8 +180,7 @@ static int ide_config(struct pcmcia_device *link) } *stk = NULL; cistpl_cftable_entry_t *cfg; int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0; - unsigned long io_base, ctl_base, is_mmio, try_slave; - void (*my_outb)(unsigned char, unsigned long); + unsigned long io_base, ctl_base; DEBUG(0, "ide_config(0x%p)\n", link); @@ -232,7 +210,7 @@ static int ide_config(struct pcmcia_device *link) /* Not sure if this is right... look up the current Vcc */ CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf)); - pass = io_base = ctl_base = is_mmio = try_slave = 0; + pass = io_base = ctl_base = 0; tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; tuple.Attributes = 0; CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); @@ -280,45 +258,11 @@ static int ide_config(struct pcmcia_device *link) goto next_entry; io_base = link->io.BasePort1; ctl_base = link->io.BasePort1 + 0x0e; - - if (io->win[0].len >= 0x20) - try_slave = 1; - } else goto next_entry; /* If we've got this far, we're done */ break; } - if ((cfg->mem.nwin > 0) || (stk->dflt.mem.nwin > 0)) { - win_req_t req; - memreq_t map; - cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &stk->dflt.mem; - - if (mem->win[0].len < 16) - goto next_entry; - - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; - req.Attributes |= WIN_ENABLE; - req.Base = mem->win[0].host_addr; - req.Size = 0; - - req.AccessSpeed = 0; - if (pcmcia_request_window(&link, &req, &link->win) != 0) - goto next_entry; - map.Page = 0; map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(link->win, &map) != 0) - goto next_entry; - - io_base = (unsigned long) ioremap(req.Base, req.Size); - ctl_base = io_base + 0x0e; - is_mmio = 1; - - if (mem->win[0].len >= 0x20) - try_slave = 1; - - break; - } - next_entry: if (cfg->flags & CISTPL_CFTABLE_DEFAULT) memcpy(&stk->dflt, cfg, sizeof(stk->dflt)); @@ -334,26 +278,21 @@ static int ide_config(struct pcmcia_device *link) CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); - if(is_mmio) - my_outb = outb_mem; - else - my_outb = outb_io; - /* disable drive interrupts during IDE probe */ - my_outb(0x02, ctl_base); + outb(0x02, ctl_base); /* special setup for KXLC005 card */ if (is_kme) - my_outb(0x81, ctl_base+1); + outb(0x81, ctl_base+1); /* retry registration in case device is still spinning up */ for (hd = -1, i = 0; i < 10; i++) { - hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link, is_mmio); + hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); if (hd >= 0) break; - if (try_slave) { - my_outb(0x02, ctl_base + 0x10); + if (link->io.NumPorts1 == 0x20) { + outb(0x02, ctl_base + 0x10); hd = idecs_register(io_base + 0x10, ctl_base + 0x10, - link->irq.AssignedIRQ, link, is_mmio); + link->irq.AssignedIRQ, link); if (hd >= 0) { io_base += 0x10; ctl_base += 0x10; diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index d2150baa7e35..1428bb7715af 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -1916,7 +1916,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) regs = ioremap(pciaddr, CP_REGS_SIZE); if (!regs) { rc = -EIO; - dev_err(&pdev->dev, "Cannot map PCI MMIO (%lx@%lx)\n", + dev_err(&pdev->dev, "Cannot map PCI MMIO (%Lx@%Lx)\n", (unsigned long long)pci_resource_len(pdev, 1), (unsigned long long)pciaddr); goto err_out_res; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 6e7d31bacf4d..6d3d41934503 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -283,7 +283,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter) } } if (adapter->have_msi) - flags &= ~SA_SHIRQ; + flags &= ~IRQF_SHARED; #endif if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags, netdev->name, netdev))) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index ad81ec68f887..11b8f1b43dd5 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -240,10 +240,12 @@ enum { #define NVREG_RNDSEED_FORCE2 0x2d00 #define NVREG_RNDSEED_FORCE3 0x7400 - NvRegUnknownSetupReg1 = 0xA0, -#define NVREG_UNKSETUP1_VAL 0x16070f - NvRegUnknownSetupReg2 = 0xA4, -#define NVREG_UNKSETUP2_VAL 0x16 + NvRegTxDeferral = 0xA0, +#define NVREG_TX_DEFERRAL_DEFAULT 0x15050f +#define NVREG_TX_DEFERRAL_RGMII_10_100 0x16070f +#define NVREG_TX_DEFERRAL_RGMII_1000 0x14050f + NvRegRxDeferral = 0xA4, +#define NVREG_RX_DEFERRAL_DEFAULT 0x16 NvRegMacAddrA = 0xA8, NvRegMacAddrB = 0xAC, NvRegMulticastAddrA = 0xB0, @@ -269,8 +271,10 @@ enum { #define NVREG_LINKSPEED_MASK (0xFFF) NvRegUnknownSetupReg5 = 0x130, #define NVREG_UNKSETUP5_BIT31 (1<<31) - NvRegUnknownSetupReg3 = 0x13c, -#define NVREG_UNKSETUP3_VAL1 0x200010 + NvRegTxWatermark = 0x13c, +#define NVREG_TX_WM_DESC1_DEFAULT 0x0200010 +#define NVREG_TX_WM_DESC2_3_DEFAULT 0x1e08000 +#define NVREG_TX_WM_DESC2_3_1000 0xfe08000 NvRegTxRxControl = 0x144, #define NVREG_TXRXCTL_KICK 0x0001 #define NVREG_TXRXCTL_BIT1 0x0002 @@ -658,7 +662,7 @@ static const struct register_test nv_registers_test[] = { { NvRegMisc1, 0x03c }, { NvRegOffloadConfig, 0x03ff }, { NvRegMulticastAddrA, 0xffffffff }, - { NvRegUnknownSetupReg3, 0x0ff }, + { NvRegTxWatermark, 0x0ff }, { NvRegWakeUpFlags, 0x07777 }, { 0,0 } }; @@ -2127,7 +2131,7 @@ static int nv_update_linkspeed(struct net_device *dev) int newdup = np->duplex; int mii_status; int retval = 0; - u32 control_1000, status_1000, phyreg, pause_flags; + u32 control_1000, status_1000, phyreg, pause_flags, txreg; /* BMSR_LSTATUS is latched, read it twice: * we want the current value. @@ -2245,6 +2249,26 @@ set_speed: phyreg |= PHY_1000; writel(phyreg, base + NvRegPhyInterface); + if (phyreg & PHY_RGMII) { + if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000) + txreg = NVREG_TX_DEFERRAL_RGMII_1000; + else + txreg = NVREG_TX_DEFERRAL_RGMII_10_100; + } else { + txreg = NVREG_TX_DEFERRAL_DEFAULT; + } + writel(txreg, base + NvRegTxDeferral); + + if (np->desc_ver == DESC_VER_1) { + txreg = NVREG_TX_WM_DESC1_DEFAULT; + } else { + if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000) + txreg = NVREG_TX_WM_DESC2_3_1000; + else + txreg = NVREG_TX_WM_DESC2_3_DEFAULT; + } + writel(txreg, base + NvRegTxWatermark); + writel(NVREG_MISC1_FORCE | ( np->duplex ? 0 : NVREG_MISC1_HD), base + NvRegMisc1); pci_push(base); @@ -3910,7 +3934,10 @@ static int nv_open(struct net_device *dev) /* 5) continue setup */ writel(np->linkspeed, base + NvRegLinkSpeed); - writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3); + if (np->desc_ver == DESC_VER_1) + writel(NVREG_TX_WM_DESC1_DEFAULT, base + NvRegTxWatermark); + else + writel(NVREG_TX_WM_DESC2_3_DEFAULT, base + NvRegTxWatermark); writel(np->txrxctl_bits, base + NvRegTxRxControl); writel(np->vlanctl_bits, base + NvRegVlanControl); pci_push(base); @@ -3932,8 +3959,8 @@ static int nv_open(struct net_device *dev) writel(readl(base + NvRegReceiverStatus), base + NvRegReceiverStatus); get_random_bytes(&i, sizeof(i)); writel(NVREG_RNDSEED_FORCE | (i&NVREG_RNDSEED_MASK), base + NvRegRandomSeed); - writel(NVREG_UNKSETUP1_VAL, base + NvRegUnknownSetupReg1); - writel(NVREG_UNKSETUP2_VAL, base + NvRegUnknownSetupReg2); + writel(NVREG_TX_DEFERRAL_DEFAULT, base + NvRegTxDeferral); + writel(NVREG_RX_DEFERRAL_DEFAULT, base + NvRegRxDeferral); if (poll_interval == -1) { if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) writel(NVREG_POLL_DEFAULT_THROUGHPUT, base + NvRegPollingInterval); diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index a4674044bd6f..2eff45bedc7c 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -2353,7 +2353,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base) #ifdef CONFIG_PCI #define PCIID_VENDOR_INTEL 0x8086 #define PCIID_VENDOR_ALI 0x10b9 -static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __devinitdata = { +static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = { { .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */ .device = 0x24cc, diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 7eb08d929139..7bbd447289b5 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -1281,7 +1281,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb, while(len) { buffer_info = &tx_ring->buffer_info[i]; - size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE); + size = min(len, IXGB_MAX_DATA_PER_TXD); buffer_info->length = size; buffer_info->dma = pci_map_single(adapter->pdev, @@ -1306,7 +1306,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb, while(len) { buffer_info = &tx_ring->buffer_info[i]; - size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE); + size = min(len, IXGB_MAX_DATA_PER_TXD); buffer_info->length = size; buffer_info->dma = pci_map_page(adapter->pdev, diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index ee1de971a712..07ca9480a6fe 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -2412,14 +2412,20 @@ static int myri10ge_resume(struct pci_dev *pdev) return -EIO; } myri10ge_restore_state(mgp); - pci_enable_device(pdev); + + status = pci_enable_device(pdev); + if (status < 0) { + dev_err(&pdev->dev, "failed to enable device\n"); + return -EIO; + } + pci_set_master(pdev); status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED, netdev->name, mgp); if (status != 0) { dev_err(&pdev->dev, "failed to allocate IRQ\n"); - goto abort_with_msi; + goto abort_with_enabled; } myri10ge_reset(mgp); @@ -2438,7 +2444,8 @@ static int myri10ge_resume(struct pci_dev *pdev) return 0; -abort_with_msi: +abort_with_enabled: + pci_disable_device(pdev); return -EIO; } diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index c6b77acb35ef..e1fe3a0a7b0b 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1976,7 +1976,6 @@ static int start_nic(struct s2io_nic *nic) XENA_dev_config_t __iomem *bar0 = nic->bar0; struct net_device *dev = nic->dev; register u64 val64 = 0; - u16 interruptible; u16 subid, i; mac_info_t *mac_control; struct config_param *config; @@ -2047,16 +2046,6 @@ static int start_nic(struct s2io_nic *nic) return FAILURE; } - /* Enable select interrupts */ - if (nic->intr_type != INTA) - en_dis_able_nic_intrs(nic, ENA_ALL_INTRS, DISABLE_INTRS); - else { - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; - interruptible |= TX_PIC_INTR | RX_PIC_INTR; - interruptible |= TX_MAC_INTR | RX_MAC_INTR; - en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS); - } - /* * With some switches, link might be already up at this point. * Because of this weird behavior, when we enable laser, @@ -3749,101 +3738,19 @@ static int s2io_open(struct net_device *dev) if (err) { DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", dev->name); - if (err == -ENODEV) - goto hw_init_failed; - else - goto hw_enable_failed; - } - - /* Store the values of the MSIX table in the nic_t structure */ - store_xmsi_data(sp); - - /* After proper initialization of H/W, register ISR */ - if (sp->intr_type == MSI) { - err = request_irq((int) sp->pdev->irq, s2io_msi_handle, - IRQF_SHARED, sp->name, dev); - if (err) { - DBG_PRINT(ERR_DBG, "%s: MSI registration \ -failed\n", dev->name); - goto isr_registration_failed; - } - } - if (sp->intr_type == MSI_X) { - int i; - - for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { - if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) { - sprintf(sp->desc1, "%s:MSI-X-%d-TX", - dev->name, i); - err = request_irq(sp->entries[i].vector, - s2io_msix_fifo_handle, 0, sp->desc1, - sp->s2io_entries[i].arg); - DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1, - (unsigned long long)sp->msix_info[i].addr); - } else { - sprintf(sp->desc2, "%s:MSI-X-%d-RX", - dev->name, i); - err = request_irq(sp->entries[i].vector, - s2io_msix_ring_handle, 0, sp->desc2, - sp->s2io_entries[i].arg); - DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2, - (unsigned long long)sp->msix_info[i].addr); - } - if (err) { - DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \ -failed\n", dev->name, i); - DBG_PRINT(ERR_DBG, "Returned: %d\n", err); - goto isr_registration_failed; - } - sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS; - } - } - if (sp->intr_type == INTA) { - err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED, - sp->name, dev); - if (err) { - DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", - dev->name); - goto isr_registration_failed; - } + goto hw_init_failed; } if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) { DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n"); + s2io_card_down(sp); err = -ENODEV; - goto setting_mac_address_failed; + goto hw_init_failed; } netif_start_queue(dev); return 0; -setting_mac_address_failed: - if (sp->intr_type != MSI_X) - free_irq(sp->pdev->irq, dev); -isr_registration_failed: - del_timer_sync(&sp->alarm_timer); - if (sp->intr_type == MSI_X) { - int i; - u16 msi_control; /* Temp variable */ - - for (i=1; (sp->s2io_entries[i].in_use == - MSIX_REGISTERED_SUCCESS); i++) { - int vector = sp->entries[i].vector; - void *arg = sp->s2io_entries[i].arg; - - free_irq(vector, arg); - } - pci_disable_msix(sp->pdev); - - /* Temp */ - pci_read_config_word(sp->pdev, 0x42, &msi_control); - msi_control &= 0xFFFE; /* Disable MSI */ - pci_write_config_word(sp->pdev, 0x42, msi_control); - } - else if (sp->intr_type == MSI) - pci_disable_msi(sp->pdev); -hw_enable_failed: - s2io_reset(sp); hw_init_failed: if (sp->intr_type == MSI_X) { if (sp->entries) @@ -3874,7 +3781,7 @@ static int s2io_close(struct net_device *dev) flush_scheduled_work(); netif_stop_queue(dev); /* Reset card, kill tasklet and free Tx and Rx buffers. */ - s2io_card_down(sp, 1); + s2io_card_down(sp); sp->device_close_flag = TRUE; /* Device is shut down. */ return 0; @@ -5919,7 +5826,7 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu) dev->mtu = new_mtu; if (netif_running(dev)) { - s2io_card_down(sp, 0); + s2io_card_down(sp); netif_stop_queue(dev); if (s2io_card_up(sp)) { DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", @@ -6216,43 +6123,106 @@ static int rxd_owner_bit_reset(nic_t *sp) } -static void s2io_card_down(nic_t * sp, int flag) +static int s2io_add_isr(nic_t * sp) { - int cnt = 0; - XENA_dev_config_t __iomem *bar0 = sp->bar0; - unsigned long flags; - register u64 val64 = 0; + int ret = 0; struct net_device *dev = sp->dev; + int err = 0; - del_timer_sync(&sp->alarm_timer); - /* If s2io_set_link task is executing, wait till it completes. */ - while (test_and_set_bit(0, &(sp->link_state))) { - msleep(50); + if (sp->intr_type == MSI) + ret = s2io_enable_msi(sp); + else if (sp->intr_type == MSI_X) + ret = s2io_enable_msi_x(sp); + if (ret) { + DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name); + sp->intr_type = INTA; } - atomic_set(&sp->card_state, CARD_DOWN); - /* disable Tx and Rx traffic on the NIC */ - stop_nic(sp); - if (flag) { - if (sp->intr_type == MSI_X) { - int i; - u16 msi_control; + /* Store the values of the MSIX table in the nic_t structure */ + store_xmsi_data(sp); - for (i=1; (sp->s2io_entries[i].in_use == - MSIX_REGISTERED_SUCCESS); i++) { - int vector = sp->entries[i].vector; - void *arg = sp->s2io_entries[i].arg; + /* After proper initialization of H/W, register ISR */ + if (sp->intr_type == MSI) { + err = request_irq((int) sp->pdev->irq, s2io_msi_handle, + IRQF_SHARED, sp->name, dev); + if (err) { + pci_disable_msi(sp->pdev); + DBG_PRINT(ERR_DBG, "%s: MSI registration failed\n", + dev->name); + return -1; + } + } + if (sp->intr_type == MSI_X) { + int i; - free_irq(vector, arg); + for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { + if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) { + sprintf(sp->desc[i], "%s:MSI-X-%d-TX", + dev->name, i); + err = request_irq(sp->entries[i].vector, + s2io_msix_fifo_handle, 0, sp->desc[i], + sp->s2io_entries[i].arg); + DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i], + (unsigned long long)sp->msix_info[i].addr); + } else { + sprintf(sp->desc[i], "%s:MSI-X-%d-RX", + dev->name, i); + err = request_irq(sp->entries[i].vector, + s2io_msix_ring_handle, 0, sp->desc[i], + sp->s2io_entries[i].arg); + DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i], + (unsigned long long)sp->msix_info[i].addr); } - pci_read_config_word(sp->pdev, 0x42, &msi_control); - msi_control &= 0xFFFE; /* Disable MSI */ - pci_write_config_word(sp->pdev, 0x42, msi_control); - pci_disable_msix(sp->pdev); - } else { - free_irq(sp->pdev->irq, dev); - if (sp->intr_type == MSI) - pci_disable_msi(sp->pdev); + if (err) { + DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration " + "failed\n", dev->name, i); + DBG_PRINT(ERR_DBG, "Returned: %d\n", err); + return -1; + } + sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS; + } + } + if (sp->intr_type == INTA) { + err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED, + sp->name, dev); + if (err) { + DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", + dev->name); + return -1; + } + } + return 0; +} +static void s2io_rem_isr(nic_t * sp) +{ + int cnt = 0; + struct net_device *dev = sp->dev; + + if (sp->intr_type == MSI_X) { + int i; + u16 msi_control; + + for (i=1; (sp->s2io_entries[i].in_use == + MSIX_REGISTERED_SUCCESS); i++) { + int vector = sp->entries[i].vector; + void *arg = sp->s2io_entries[i].arg; + + free_irq(vector, arg); + } + pci_read_config_word(sp->pdev, 0x42, &msi_control); + msi_control &= 0xFFFE; /* Disable MSI */ + pci_write_config_word(sp->pdev, 0x42, msi_control); + + pci_disable_msix(sp->pdev); + } else { + free_irq(sp->pdev->irq, dev); + if (sp->intr_type == MSI) { + u16 val; + + pci_disable_msi(sp->pdev); + pci_read_config_word(sp->pdev, 0x4c, &val); + val ^= 0x1; + pci_write_config_word(sp->pdev, 0x4c, val); } } /* Waiting till all Interrupt handlers are complete */ @@ -6263,6 +6233,26 @@ static void s2io_card_down(nic_t * sp, int flag) break; cnt++; } while(cnt < 5); +} + +static void s2io_card_down(nic_t * sp) +{ + int cnt = 0; + XENA_dev_config_t __iomem *bar0 = sp->bar0; + unsigned long flags; + register u64 val64 = 0; + + del_timer_sync(&sp->alarm_timer); + /* If s2io_set_link task is executing, wait till it completes. */ + while (test_and_set_bit(0, &(sp->link_state))) { + msleep(50); + } + atomic_set(&sp->card_state, CARD_DOWN); + + /* disable Tx and Rx traffic on the NIC */ + stop_nic(sp); + + s2io_rem_isr(sp); /* Kill tasklet. */ tasklet_kill(&sp->task); @@ -6314,23 +6304,16 @@ static int s2io_card_up(nic_t * sp) mac_info_t *mac_control; struct config_param *config; struct net_device *dev = (struct net_device *) sp->dev; + u16 interruptible; /* Initialize the H/W I/O registers */ if (init_nic(sp) != 0) { DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", dev->name); + s2io_reset(sp); return -ENODEV; } - if (sp->intr_type == MSI) - ret = s2io_enable_msi(sp); - else if (sp->intr_type == MSI_X) - ret = s2io_enable_msi_x(sp); - if (ret) { - DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name); - sp->intr_type = INTA; - } - /* * Initializing the Rx buffers. For now we are considering only 1 * Rx ring and initializing buffers into 30 Rx blocks @@ -6361,21 +6344,39 @@ static int s2io_card_up(nic_t * sp) sp->lro_max_aggr_per_sess = lro_max_pkts; } - /* Enable tasklet for the device */ - tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev); - /* Enable Rx Traffic and interrupts on the NIC */ if (start_nic(sp)) { DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name); - tasklet_kill(&sp->task); s2io_reset(sp); - free_irq(dev->irq, dev); + free_rx_buffers(sp); + return -ENODEV; + } + + /* Add interrupt service routine */ + if (s2io_add_isr(sp) != 0) { + if (sp->intr_type == MSI_X) + s2io_rem_isr(sp); + s2io_reset(sp); free_rx_buffers(sp); return -ENODEV; } S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2)); + /* Enable tasklet for the device */ + tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev); + + /* Enable select interrupts */ + if (sp->intr_type != INTA) + en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS); + else { + interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; + interruptible |= TX_PIC_INTR | RX_PIC_INTR; + interruptible |= TX_MAC_INTR | RX_MAC_INTR; + en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS); + } + + atomic_set(&sp->card_state, CARD_UP); return 0; } @@ -6395,7 +6396,7 @@ static void s2io_restart_nic(unsigned long data) struct net_device *dev = (struct net_device *) data; nic_t *sp = dev->priv; - s2io_card_down(sp, 0); + s2io_card_down(sp); if (s2io_card_up(sp)) { DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name); diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index c43f52179708..217097bc22f1 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -829,8 +829,7 @@ struct s2io_nic { #define MSIX_FLG 0xA5 struct msix_entry *entries; struct s2io_msix_entry *s2io_entries; - char desc1[35]; - char desc2[35]; + char desc[MAX_REQUESTED_MSI_X][25]; int avail_msix_vectors; /* No. of MSI-X vectors granted by system */ @@ -1002,7 +1001,7 @@ static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag); static struct ethtool_ops netdev_ethtool_ops; static void s2io_set_link(unsigned long data); static int s2io_set_swapper(nic_t * sp); -static void s2io_card_down(nic_t *nic, int flag); +static void s2io_card_down(nic_t *nic); static int s2io_card_up(nic_t *nic); static int get_xena_rev_id(struct pci_dev *pdev); static void restore_xmsi_data(nic_t *nic); diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h index 2b19f8ad0318..7f8e6d0084c7 100644 --- a/drivers/net/sk98lin/h/xmac_ii.h +++ b/drivers/net/sk98lin/h/xmac_ii.h @@ -1473,7 +1473,7 @@ extern "C" { #define GM_TXCR_FORCE_JAM (1<<15) /* Bit 15: Force Jam / Flow-Control */ #define GM_TXCR_CRC_DIS (1<<14) /* Bit 14: Disable insertion of CRC */ #define GM_TXCR_PAD_DIS (1<<13) /* Bit 13: Disable padding of packets */ -#define GM_TXCR_COL_THR_MSK (1<<10) /* Bit 12..10: Collision Threshold */ +#define GM_TXCR_COL_THR_MSK (7<<10) /* Bit 12..10: Collision Threshold */ #define TX_COL_THR(x) (SHIFT10(x) & GM_TXCR_COL_THR_MSK) diff --git a/drivers/net/skge.h b/drivers/net/skge.h index ed19ff47ce11..593387b3c0dd 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -1734,11 +1734,11 @@ enum { GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */ GM_TXCR_CRC_DIS = 1<<14, /* Bit 14: Disable insertion of CRC */ GM_TXCR_PAD_DIS = 1<<13, /* Bit 13: Disable padding of packets */ - GM_TXCR_COL_THR_MSK = 1<<10, /* Bit 12..10: Collision Threshold */ + GM_TXCR_COL_THR_MSK = 7<<10, /* Bit 12..10: Collision Threshold */ }; #define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK) -#define TX_COL_DEF 0x04 +#define TX_COL_DEF 0x04 /* late collision after 64 byte */ /* GM_RX_CTRL 16 bit r/w Receive Control Register */ enum { diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 31093760aa1e..d98f28c34e5c 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -65,6 +65,7 @@ #define RX_MAX_PENDING (RX_LE_SIZE/2 - 2) #define RX_DEF_PENDING RX_MAX_PENDING #define RX_SKB_ALIGN 8 +#define RX_BUF_WRITE 16 #define TX_RING_SIZE 512 #define TX_DEF_PENDING (TX_RING_SIZE - 1) @@ -234,7 +235,6 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) } if (hw->chip_id == CHIP_ID_YUKON_EC_U) { - sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON); sky2_pci_write32(hw, PCI_DEV_REG3, 0); reg1 = sky2_pci_read32(hw, PCI_DEV_REG4); reg1 &= P_ASPM_CONTROL_MSK; @@ -243,6 +243,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) } sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + udelay(100); break; @@ -255,6 +256,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) else reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + udelay(100); if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) sky2_write8(hw, B2_Y2_CLK_GATE, 0); @@ -1389,7 +1391,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) } sky2->tx_cons = put; - if (tx_avail(sky2) > MAX_SKB_TX_LE) + if (tx_avail(sky2) > MAX_SKB_TX_LE + 4) netif_wake_queue(dev); } @@ -1888,9 +1890,6 @@ resubmit: re->skb->ip_summed = CHECKSUM_NONE; sky2_rx_add(sky2, re->mapaddr); - /* Tell receiver about new buffers. */ - sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put); - return skb; oversize: @@ -1937,7 +1936,9 @@ static inline int sky2_more_work(const struct sky2_hw *hw) /* Process status response ring */ static int sky2_status_intr(struct sky2_hw *hw, int to_do) { + struct sky2_port *sky2; int work_done = 0; + unsigned buf_write[2] = { 0, 0 }; u16 hwidx = sky2_read16(hw, STAT_PUT_IDX); rmb(); @@ -1945,7 +1946,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) while (hw->st_idx != hwidx) { struct sky2_status_le *le = hw->st_le + hw->st_idx; struct net_device *dev; - struct sky2_port *sky2; struct sk_buff *skb; u32 status; u16 length; @@ -1978,6 +1978,14 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) #endif netif_receive_skb(skb); + /* Update receiver after 16 frames */ + if (++buf_write[le->link] == RX_BUF_WRITE) { + sky2_put_idx(hw, rxqaddr[le->link], + sky2->rx_put); + buf_write[le->link] = 0; + } + + /* Stop after net poll weight */ if (++work_done >= to_do) goto exit_loop; break; @@ -2016,6 +2024,16 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) } exit_loop: + if (buf_write[0]) { + sky2 = netdev_priv(hw->dev[0]); + sky2_put_idx(hw, Q_R1, sky2->rx_put); + } + + if (buf_write[1]) { + sky2 = netdev_priv(hw->dev[1]); + sky2_put_idx(hw, Q_R2, sky2->rx_put); + } + return work_done; } @@ -2286,7 +2304,7 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk) } -static int __devinit sky2_reset(struct sky2_hw *hw) +static int sky2_reset(struct sky2_hw *hw) { u16 status; u8 t8, pmd_type; @@ -3437,17 +3455,14 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state) return -EINVAL; del_timer_sync(&hw->idle_timer); + netif_poll_disable(hw->dev[0]); for (i = 0; i < hw->ports; i++) { struct net_device *dev = hw->dev[i]; - if (dev) { - if (!netif_running(dev)) - continue; - + if (netif_running(dev)) { sky2_down(dev); netif_device_detach(dev); - netif_poll_disable(dev); } } @@ -3474,9 +3489,8 @@ static int sky2_resume(struct pci_dev *pdev) for (i = 0; i < hw->ports; i++) { struct net_device *dev = hw->dev[i]; - if (dev && netif_running(dev)) { + if (netif_running(dev)) { netif_device_attach(dev); - netif_poll_enable(dev); err = sky2_up(dev); if (err) { @@ -3488,6 +3502,7 @@ static int sky2_resume(struct pci_dev *pdev) } } + netif_poll_enable(hw->dev[0]); sky2_idle_start(hw); out: return err; diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 8a0bc5525f0a..2db8d19b22d1 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1480,7 +1480,7 @@ enum { GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */ GM_TXCR_CRC_DIS = 1<<14, /* Bit 14: Disable insertion of CRC */ GM_TXCR_PAD_DIS = 1<<13, /* Bit 13: Disable padding of packets */ - GM_TXCR_COL_THR_MSK = 1<<10, /* Bit 12..10: Collision Threshold */ + GM_TXCR_COL_THR_MSK = 7<<10, /* Bit 12..10: Collision Threshold */ }; #define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK) diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index b4028049ed76..4ec4b4d23ae5 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -354,6 +354,24 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r, #define SMC_IRQ_FLAGS (0) +#elif defined(CONFIG_ARCH_VERSATILE) + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 1 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inl(a, r) readl((a) + (r)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) +#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) + +#define SMC_IRQ_FLAGS (0) + #else #define SMC_CAN_USE_8BIT 1 diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index e1c5a939bca4..3889f79e7128 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -1547,7 +1547,7 @@ static void handle_irq_noise(struct bcm43xx_private *bcm) goto generate_new; /* Get the noise samples. */ - assert(bcm->noisecalc.nr_samples <= 8); + assert(bcm->noisecalc.nr_samples < 8); i = bcm->noisecalc.nr_samples; noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(radio->nrssi_lt) - 1); noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(radio->nrssi_lt) - 1); diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index ce1cb2c6aa8d..72f90525bf68 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -375,10 +375,8 @@ static void int_urb_complete(struct urb *urb, struct pt_regs *pt_regs) case -ENODEV: case -ENOENT: case -ECONNRESET: - goto kfree; case -EPIPE: - usb_clear_halt(urb->dev, EP_INT_IN); - /* FALL-THROUGH */ + goto kfree; default: goto resubmit; } @@ -580,10 +578,8 @@ static void rx_urb_complete(struct urb *urb, struct pt_regs *pt_regs) case -ENODEV: case -ENOENT: case -ECONNRESET: - return; case -EPIPE: - usb_clear_halt(urb->dev, EP_DATA_IN); - /* FALL-THROUGH */ + return; default: dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); goto resubmit; @@ -749,11 +745,9 @@ static void tx_urb_complete(struct urb *urb, struct pt_regs *pt_regs) case -ENODEV: case -ENOENT: case -ECONNRESET: + case -EPIPE: dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); break; - case -EPIPE: - usb_clear_halt(urb->dev, EP_DATA_OUT); - /* FALL-THROUGH */ default: dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); goto resubmit; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index cf57d7de3765..9f79dd6d51ab 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -19,6 +19,7 @@ #include <asm/dma.h> /* isa_dma_bridge_buggy */ #include "pci.h" +unsigned int pci_pm_d3_delay = 10; /** * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children @@ -313,6 +314,14 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) } else if (dev->current_state == state) return 0; /* we're already there */ + /* + * If the device or the parent bridge can't support PCI PM, ignore + * the request if we're doing anything besides putting it into D0 + * (which would only happen on boot). + */ + if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev)) + return 0; + /* find PCI PM capability in list */ pm = pci_find_capability(dev, PCI_CAP_ID_PM); @@ -363,7 +372,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ if (state == PCI_D3hot || dev->current_state == PCI_D3hot) - msleep(10); + msleep(pci_pm_d3_delay); else if (state == PCI_D2 || dev->current_state == PCI_D2) udelay(200); diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 9cc842b666eb..08d58fc78ee1 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -47,7 +47,7 @@ extern int pci_msi_quirk; #else #define pci_msi_quirk 0 #endif - +extern unsigned int pci_pm_d3_delay; #ifdef CONFIG_PCI_MSI void disable_msi_mode(struct pci_dev *dev, int pos, int type); void pci_no_msi(void); @@ -66,7 +66,15 @@ static inline int pci_save_msix_state(struct pci_dev *dev) { return 0; } static inline void pci_restore_msi_state(struct pci_dev *dev) {} static inline void pci_restore_msix_state(struct pci_dev *dev) {} #endif +static inline int pci_no_d1d2(struct pci_dev *dev) +{ + unsigned int parent_dstates = 0; + if (dev->bus->self) + parent_dstates = dev->bus->self->no_d1d2; + return (dev->no_d1d2 || parent_dstates); + +} extern int pcie_mch_quirk; extern struct device_attribute pci_dev_attrs[]; extern struct class_device_attribute class_device_attr_cpuaffinity; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index de3bbc88fb26..e3c78c39b7e4 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -683,6 +683,33 @@ static void __devinit quirk_vt82c598_id(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id ); +#ifdef CONFIG_ACPI_SLEEP + +/* + * Some VIA systems boot with the abnormal status flag set. This can cause + * the BIOS to re-POST the system on resume rather than passing control + * back to the OS. Clear the flag on boot + */ +static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev) +{ + u32 reg; + + acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS, + ®); + + if (reg & 0x800) { + printk("Clearing abnormal poweroff flag\n"); + acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK, + ACPI_REGISTER_PM1_STATUS, + (u16)0x800); + } +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff); + +#endif + /* * CardBus controllers have a legacy base address that enables them * to respond as i82365 pcmcia controllers. We don't want them to @@ -1391,6 +1418,37 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pc DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); +/* + * Some Intel PCI Express chipsets have trouble with downstream + * device power management. + */ +static void quirk_intel_pcie_pm(struct pci_dev * dev) +{ + pci_pm_d3_delay = 120; + dev->no_d1d2 = 1; +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); /* * Fixup the cardbus bridges on the IBM Dock II docking station diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 7fdbc5dad5fd..2ee742d40c43 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -23,6 +23,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_LH7A404 default y if ARCH_S3C2410 default y if PXA27x + default y if ARCH_EP93XX default y if ARCH_AT91RM9200 # PPC: default y if STB03xxx diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index c7123bf71c58..4710eb02ed64 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -48,7 +48,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB_AUERSWALD) += misc/ -obj-$(CONFIG_USB_CY7C63) += misc/ +obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/ obj-$(CONFIG_USB_CYTHERM) += misc/ obj-$(CONFIG_USB_EMI26) += misc/ obj-$(CONFIG_USB_EMI62) += misc/ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 3670d77e912c..ca90326f2f5c 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -291,13 +291,13 @@ static void acm_read_bulk(struct urb *urb, struct pt_regs *regs) struct acm_ru *rcv = urb->context; struct acm *acm = rcv->instance; int status = urb->status; - dbg("Entering acm_read_bulk with status %d\n", urb->status); + dbg("Entering acm_read_bulk with status %d", urb->status); if (!ACM_READY(acm)) return; if (status) - dev_dbg(&acm->data->dev, "bulk rx status %d\n", status); + dev_dbg(&acm->data->dev, "bulk rx status %d", status); buf = rcv->buffer; buf->size = urb->actual_length; @@ -343,7 +343,7 @@ next_buffer: list_del(&buf->list); spin_unlock(&acm->read_lock); - dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d\n", buf, buf->size); + dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size); tty_buffer_request_room(tty, buf->size); if (!acm->throttle) @@ -394,7 +394,7 @@ urbs: rcv->urb->transfer_dma = buf->dma; rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p\n", rcv->urb, rcv, buf); + dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p", rcv->urb, rcv, buf); /* This shouldn't kill the driver as unsuccessful URBs are returned to the free-urbs-pool and resubmited ASAP */ @@ -413,7 +413,7 @@ static void acm_write_bulk(struct urb *urb, struct pt_regs *regs) { struct acm *acm = (struct acm *)urb->context; - dbg("Entering acm_write_bulk with status %d\n", urb->status); + dbg("Entering acm_write_bulk with status %d", urb->status); acm_write_done(acm); acm_write_start(acm); @@ -424,7 +424,7 @@ static void acm_write_bulk(struct urb *urb, struct pt_regs *regs) static void acm_softint(void *private) { struct acm *acm = private; - dbg("Entering acm_softint.\n"); + dbg("Entering acm_softint."); if (!ACM_READY(acm)) return; @@ -440,7 +440,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) struct acm *acm; int rv = -EINVAL; int i; - dbg("Entering acm_tty_open.\n"); + dbg("Entering acm_tty_open."); mutex_lock(&open_mutex); @@ -541,7 +541,7 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c int wbn; struct acm_wb *wb; - dbg("Entering acm_tty_write to write %d bytes,\n", count); + dbg("Entering acm_tty_write to write %d bytes,", count); if (!ACM_READY(acm)) return -EINVAL; @@ -793,7 +793,7 @@ static int acm_probe (struct usb_interface *intf, if (!buflen) { if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) { - dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n"); + dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint"); buflen = intf->cur_altsetting->endpoint->extralen; buffer = intf->cur_altsetting->endpoint->extra; } else { @@ -842,24 +842,24 @@ next_desc: if (!union_header) { if (call_interface_num > 0) { - dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n"); + dev_dbg(&intf->dev,"No union descriptor, using call management descriptor"); data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num)); control_interface = intf; } else { - dev_dbg(&intf->dev,"No union descriptor, giving up\n"); + dev_dbg(&intf->dev,"No union descriptor, giving up"); return -ENODEV; } } else { control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0); data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0)); if (!control_interface || !data_interface) { - dev_dbg(&intf->dev,"no interfaces\n"); + dev_dbg(&intf->dev,"no interfaces"); return -ENODEV; } } if (data_interface_num != call_interface_num) - dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n"); + dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported."); skip_normal_probe: @@ -867,7 +867,7 @@ skip_normal_probe: if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) { if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) { struct usb_interface *t; - dev_dbg(&intf->dev,"Your device has switched interfaces.\n"); + dev_dbg(&intf->dev,"Your device has switched interfaces."); t = control_interface; control_interface = data_interface; @@ -878,7 +878,7 @@ skip_normal_probe: } if (usb_interface_claimed(data_interface)) { /* valid in this context */ - dev_dbg(&intf->dev,"The data interface isn't available\n"); + dev_dbg(&intf->dev,"The data interface isn't available"); return -EBUSY; } @@ -895,7 +895,7 @@ skip_normal_probe: if ((epread->bEndpointAddress & USB_DIR_IN) != USB_DIR_IN) { /* descriptors are swapped */ struct usb_endpoint_descriptor *t; - dev_dbg(&intf->dev,"The data interface has switched endpoints\n"); + dev_dbg(&intf->dev,"The data interface has switched endpoints"); t = epread; epread = epwrite; @@ -910,7 +910,7 @@ skip_normal_probe: } if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) { - dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n"); + dev_dbg(&intf->dev, "out of memory (acm kzalloc)"); goto alloc_fail; } @@ -936,26 +936,26 @@ skip_normal_probe: buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); if (!buf) { - dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n"); + dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)"); goto alloc_fail2; } acm->ctrl_buffer = buf; if (acm_write_buffers_alloc(acm) < 0) { - dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n"); + dev_dbg(&intf->dev, "out of memory (write buffer alloc)"); goto alloc_fail4; } acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL); if (!acm->ctrlurb) { - dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n"); + dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)"); goto alloc_fail5; } for (i = 0; i < num_rx_buf; i++) { struct acm_ru *rcv = &(acm->ru[i]); if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) { - dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n"); + dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)"); goto alloc_fail7; } @@ -966,13 +966,13 @@ skip_normal_probe: struct acm_rb *buf = &(acm->rb[i]); if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) { - dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n"); + dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)"); goto alloc_fail7; } } acm->writeurb = usb_alloc_urb(0, GFP_KERNEL); if (!acm->writeurb) { - dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)\n"); + dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)"); goto alloc_fail7; } @@ -1086,6 +1086,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0ace, 0x1608), /* ZyDAS 56K USB MODEM */ .driver_info = SINGLE_RX_URB, /* firmware bug */ }, + { USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */ + .driver_info = SINGLE_RX_URB, /* firmware bug */ + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_ACM_PROTO_AT_V25TER) }, diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index a08787e253aa..6e3b5358a760 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -31,9 +31,6 @@ config USB_DEVICEFS For the format of the various /proc/bus/usb/ files, please read <file:Documentation/usb/proc_usb_info.txt>. - Please note that this code is completely unrelated to devfs, the - "/dev file system support". - Most users want to say Y here. config USB_BANDWIDTH diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 875596e98e42..26c8cb5f3e67 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1790,7 +1790,10 @@ static int finish_device_resume(struct usb_device *udev) * and device drivers will know about any resume quirks. */ status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus); - if (status < 2) + if (status >= 0) + status = (status == 2 ? 0 : -ENODEV); + + if (status) dev_dbg(&udev->dev, "gone after usb resume? status %d\n", status); @@ -1879,7 +1882,12 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) dev_dbg(hub->intfdev, "port %d status %04x.%04x after resume, %d\n", port1, portchange, devstatus, status); + if (status >= 0) + status = -ENODEV; } else { + if (portchange & USB_PORT_STAT_C_SUSPEND) + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_SUSPEND); /* TRSMRCY = 10 msec */ msleep(10); if (udev) diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index f48c3dbc367a..3182c2224ba2 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -695,7 +695,7 @@ static void usbfs_remove_device(struct usb_device *dev) wake_up_all(&ds->wait); list_del_init(&ds->list); if (ds->discsignr) { - sinfo.si_signo = SIGPIPE; + sinfo.si_signo = ds->discsignr; sinfo.si_errno = EPIPE; sinfo.si_code = SI_ASYNCIO; sinfo.si_addr = ds->disccontext; diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index f7c6d758e1b0..53d584589c26 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -34,12 +34,12 @@ /* we must assign addresses for configurable endpoints (like net2280) */ -static __initdata unsigned epnum; +static __devinitdata unsigned epnum; // #define MANY_ENDPOINTS #ifdef MANY_ENDPOINTS /* more than 15 configurable endpoints */ -static __initdata unsigned in_epnum; +static __devinitdata unsigned in_epnum; #endif @@ -59,7 +59,7 @@ static __initdata unsigned in_epnum; * NOTE: each endpoint is unidirectional, as specified by its USB * descriptor; and isn't specific to a configuration or altsetting. */ -static int __init +static int __devinit ep_matches ( struct usb_gadget *gadget, struct usb_ep *ep, @@ -73,7 +73,7 @@ ep_matches ( /* endpoint already claimed? */ if (0 != ep->driver_data) return 0; - + /* only support ep0 for portable CONTROL traffic */ type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; if (USB_ENDPOINT_XFER_CONTROL == type) @@ -186,7 +186,7 @@ ep_matches ( return 1; } -static struct usb_ep * __init +static struct usb_ep * __devinit find_ep (struct usb_gadget *gadget, const char *name) { struct usb_ep *ep; @@ -228,7 +228,7 @@ find_ep (struct usb_gadget *gadget, const char *name) * * On failure, this returns a null endpoint descriptor. */ -struct usb_ep * __init usb_ep_autoconfig ( +struct usb_ep * __devinit usb_ep_autoconfig ( struct usb_gadget *gadget, struct usb_endpoint_descriptor *desc ) @@ -276,7 +276,7 @@ struct usb_ep * __init usb_ep_autoconfig ( return ep; } - /* Second, look at endpoints until an unclaimed one looks usable */ + /* Second, look at endpoints until an unclaimed one looks usable */ list_for_each_entry (ep, &gadget->ep_list, ep_list) { if (ep_matches (gadget, ep, desc)) return ep; @@ -295,7 +295,7 @@ struct usb_ep * __init usb_ep_autoconfig ( * state such as ep->driver_data and the record of assigned endpoints * used by usb_ep_autoconfig(). */ -void __init usb_ep_autoconfig_reset (struct usb_gadget *gadget) +void __devinit usb_ep_autoconfig_reset (struct usb_gadget *gadget) { struct usb_ep *ep; diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 8320fcef0425..4fe1bec1c255 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -2131,7 +2131,7 @@ eth_req_free (struct usb_ep *ep, struct usb_request *req) } -static void __exit +static void /* __init_or_exit */ eth_unbind (struct usb_gadget *gadget) { struct eth_dev *dev = get_gadget_data (gadget); @@ -2158,7 +2158,7 @@ eth_unbind (struct usb_gadget *gadget) set_gadget_data (gadget, NULL); } -static u8 __init nibble (unsigned char c) +static u8 __devinit nibble (unsigned char c) { if (likely (isdigit (c))) return c - '0'; @@ -2168,7 +2168,7 @@ static u8 __init nibble (unsigned char c) return 0; } -static int __init get_ether_addr(const char *str, u8 *dev_addr) +static int __devinit get_ether_addr(const char *str, u8 *dev_addr) { if (str) { unsigned i; @@ -2189,7 +2189,7 @@ static int __init get_ether_addr(const char *str, u8 *dev_addr) return 1; } -static int __init +static int __devinit eth_bind (struct usb_gadget *gadget) { struct eth_dev *dev; diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index b1a9cf06f3e6..8d7f1e84cd7b 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -3691,7 +3691,7 @@ static void lun_release(struct device *dev) kref_put(&fsg->ref, fsg_release); } -static void __exit fsg_unbind(struct usb_gadget *gadget) +static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) { struct fsg_dev *fsg = get_gadget_data(gadget); int i; diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index 354670d12308..408c3380d602 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -1398,7 +1398,7 @@ static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS]; #endif /* CONFIG_USB_GADGET_DEBUG_FILES */ -int __init rndis_init (void) +int __devinit rndis_init (void) { u8 i; diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h index 2956608be751..4c3c7259f019 100644 --- a/drivers/usb/gadget/rndis.h +++ b/drivers/usb/gadget/rndis.h @@ -264,7 +264,7 @@ int rndis_signal_disconnect (int configNr); int rndis_state (int configNr); extern void rndis_set_host_mac (int configNr, const u8 *addr); -int __init rndis_init (void); +int __devinit rndis_init (void); void rndis_exit (void); #endif /* _LINUX_RNDIS_H */ diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index 30d7664d449d..e762aa19ab0a 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -1473,7 +1473,7 @@ autoconf_fail: * Called on module unload. Frees the control request and device * structure. */ -static void __exit gs_unbind(struct usb_gadget *gadget) +static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget) { struct gs_dev *dev = get_gadget_data(gadget); diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 3a08a7ab4ce0..b7018ee487ea 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -1121,7 +1121,7 @@ zero_autoresume (unsigned long _dev) /*-------------------------------------------------------------------------*/ -static void __exit +static void /* __init_or_exit */ zero_unbind (struct usb_gadget *gadget) { struct zero_dev *dev = get_gadget_data (gadget); diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index d66867aa527e..26ed757d22a6 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -41,8 +41,6 @@ #endif #define USBH_DISABLE (USB_MCFG_EBMEN | USB_MCFG_EMEMEN) -#endif /* Au1200 */ - extern int usb_disabled(void); /*-------------------------------------------------------------------------*/ @@ -107,9 +105,9 @@ int usb_ehci_au1xxx_probe(const struct hc_driver *driver, /* Au1200 AB USB does not support coherent memory */ if (!(read_c0_prid() & 0xff)) { - pr_info("%s: this is chip revision AB!\n", dev->dev.name); + pr_info("%s: this is chip revision AB!\n", dev->name); pr_info("%s: update your board or re-configure the kernel\n", - dev->dev.name); + dev->name); return -ENODEV; } #endif @@ -228,9 +226,8 @@ static const struct hc_driver ehci_au1xxx_hc_driver = { /*-------------------------------------------------------------------------*/ -static int ehci_hcd_au1xxx_drv_probe(struct device *dev) +static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) { - struct platform_device *pdev = to_platform_device(dev); struct usb_hcd *hcd = NULL; int ret; @@ -243,10 +240,9 @@ static int ehci_hcd_au1xxx_drv_probe(struct device *dev) return ret; } -static int ehci_hcd_au1xxx_drv_remove(struct device *dev) +static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev) { - struct platform_device *pdev = to_platform_device(dev); - struct usb_hcd *hcd = dev_get_drvdata(dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_ehci_au1xxx_remove(hcd, pdev); return 0; @@ -269,12 +265,13 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev) } */ MODULE_ALIAS("au1xxx-ehci"); -/* FIXME use "struct platform_driver" */ -static struct device_driver ehci_hcd_au1xxx_driver = { - .name = "au1xxx-ehci", - .bus = &platform_bus_type, +static struct platform_driver ehci_hcd_au1xxx_driver = { .probe = ehci_hcd_au1xxx_drv_probe, .remove = ehci_hcd_au1xxx_drv_remove, /*.suspend = ehci_hcd_au1xxx_drv_suspend, */ /*.resume = ehci_hcd_au1xxx_drv_resume, */ + .driver = { + .name = "au1xxx-ehci", + .bus = &platform_bus_type + } }; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index cee6f538de0a..85b0b4ad4c16 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -625,10 +625,11 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs) writel (status | CMD_RUN, &ehci->regs->command); while (i--) { - status = readl (&ehci->regs->port_status [i]); - if (status & PORT_OWNER) + int pstatus = readl (&ehci->regs->port_status [i]); + + if (pstatus & PORT_OWNER) continue; - if (!(status & PORT_RESUME) + if (!(pstatus & PORT_RESUME) || ehci->reset_done [i] != 0) continue; diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 689261e44018..822914e2f43b 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -101,13 +101,16 @@ static void au1xxx_start_ohc(struct platform_device *dev) #endif /* Au1200 */ +#ifndef CONFIG_SOC_AU1200 /* wait for reset complete (read register twice; see au1500 errata) */ while (au_readl(USB_HOST_CONFIG), !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD)) +#endif udelay(1000); printk(KERN_DEBUG __FILE__ ": Clock to USB host has been enabled \n"); +#endif } static void au1xxx_stop_ohc(struct platform_device *dev) @@ -157,9 +160,9 @@ static int usb_ohci_au1xxx_probe(const struct hc_driver *driver, /* Au1200 AB USB does not support coherent memory */ if (!(read_c0_prid() & 0xff)) { pr_info("%s: this is chip revision AB !!\n", - dev->dev.name); + dev->name); pr_info("%s: update your board or re-configure the kernel\n", - dev->dev.name); + dev->name); return -ENODEV; } #endif diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c new file mode 100644 index 000000000000..6531c4d26527 --- /dev/null +++ b/drivers/usb/host/ohci-ep93xx.c @@ -0,0 +1,225 @@ +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> + * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> + * (C) Copyright 2002 Hewlett-Packard Company + * + * Bus Glue for ep93xx. + * + * Written by Christopher Hoover <ch@hpl.hp.com> + * Based on fragments of previous driver by Russell King et al. + * + * Modified for LH7A404 from ohci-sa1111.c + * by Durgesh Pattamatta <pattamattad@sharpsec.com> + * + * Modified for pxa27x from ohci-lh7a404.c + * by Nick Bane <nick@cecomputing.co.uk> 26-8-2004 + * + * Modified for ep93xx from ohci-pxa27x.c + * by Lennert Buytenhek <buytenh@wantstofly.org> 28-2-2006 + * Based on an earlier driver by Ray Lehtiniemi + * + * This file is licenced under the GPL. + */ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/signal.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/hardware.h> + +static struct clk *usb_host_clock; + +static void ep93xx_start_hc(struct device *dev) +{ + clk_enable(usb_host_clock); +} + +static void ep93xx_stop_hc(struct device *dev) +{ + clk_disable(usb_host_clock); +} + +static int usb_hcd_ep93xx_probe(const struct hc_driver *driver, + struct platform_device *pdev) +{ + int retval; + struct usb_hcd *hcd; + + if (pdev->resource[1].flags != IORESOURCE_IRQ) { + pr_debug("resource[1] is not IORESOURCE_IRQ"); + return -ENOMEM; + } + + hcd = usb_create_hcd(driver, &pdev->dev, "ep93xx"); + if (hcd == NULL) + return -ENOMEM; + + hcd->rsrc_start = pdev->resource[0].start; + hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + usb_put_hcd(hcd); + retval = -EBUSY; + goto err1; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (hcd->regs == NULL) { + pr_debug("ioremap failed"); + retval = -ENOMEM; + goto err2; + } + + usb_host_clock = clk_get(&pdev->dev, "usb_host"); + ep93xx_start_hc(&pdev->dev); + + ohci_hcd_init(hcd_to_ohci(hcd)); + + retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT); + if (retval == 0) + return retval; + + ep93xx_stop_hc(&pdev->dev); + iounmap(hcd->regs); +err2: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err1: + usb_put_hcd(hcd); + + return retval; +} + +static void usb_hcd_ep93xx_remove(struct usb_hcd *hcd, + struct platform_device *pdev) +{ + usb_remove_hcd(hcd); + ep93xx_stop_hc(&pdev->dev); + clk_put(usb_host_clock); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); +} + +static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + if ((ret = ohci_init(ohci)) < 0) + return ret; + + if ((ret = ohci_run(ohci)) < 0) { + err("can't start %s", hcd->self.bus_name); + ohci_stop(hcd); + return ret; + } + + return 0; +} + +static struct hc_driver ohci_ep93xx_hc_driver = { + .description = hcd_name, + .product_desc = "EP93xx OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + .start = ohci_ep93xx_start, + .stop = ohci_stop, + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + .get_frame_number = ohci_get_frame, + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +extern int usb_disabled(void); + +static int ohci_hcd_ep93xx_drv_probe(struct platform_device *pdev) +{ + int ret; + + ret = -ENODEV; + if (!usb_disabled()) + ret = usb_hcd_ep93xx_probe(&ohci_ep93xx_hc_driver, pdev); + + return ret; +} + +static int ohci_hcd_ep93xx_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_hcd_ep93xx_remove(hcd, pdev); + + return 0; +} + +#ifdef CONFIG_PM +static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ochi_hcd *ohci = hcd_to_ohci(hcd); + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ep93xx_stop_hc(&pdev->dev); + hcd->state = HC_STATE_SUSPENDED; + pdev->dev.power.power_state = PMSG_SUSPEND; + + return 0; +} + +static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int status; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ep93xx_start_hc(&pdev->dev); + pdev->dev.power.power_state = PMSG_ON; + usb_hcd_resume_root_hub(hcd); + + return 0; +} +#endif + + +static struct platform_driver ohci_hcd_ep93xx_driver = { + .probe = ohci_hcd_ep93xx_drv_probe, + .remove = ohci_hcd_ep93xx_drv_remove, +#ifdef CONFIG_PM + .suspend = ohci_hcd_ep93xx_drv_suspend, + .resume = ohci_hcd_ep93xx_drv_resume, +#endif + .driver = { + .name = "ep93xx-ohci", + }, +}; + +static int __init ohci_hcd_ep93xx_init(void) +{ + return platform_driver_register(&ohci_hcd_ep93xx_driver); +} + +static void __exit ohci_hcd_ep93xx_cleanup(void) +{ + platform_driver_unregister(&ohci_hcd_ep93xx_driver); +} + +module_init(ohci_hcd_ep93xx_init); +module_exit(ohci_hcd_ep93xx_cleanup); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 8fb842ed5f6e..afef5ac35b4a 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -901,6 +901,10 @@ MODULE_LICENSE ("GPL"); #include "ohci-pxa27x.c" #endif +#ifdef CONFIG_ARCH_EP93XX +#include "ohci-ep93xx.c" +#endif + #ifdef CONFIG_SOC_AU1X00 #include "ohci-au1xxx.c" #endif @@ -919,6 +923,7 @@ MODULE_LICENSE ("GPL"); || defined(CONFIG_ARCH_OMAP) \ || defined (CONFIG_ARCH_LH7A404) \ || defined (CONFIG_PXA27x) \ + || defined (CONFIG_ARCH_EP93XX) \ || defined (CONFIG_SOC_AU1X00) \ || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \ || defined (CONFIG_ARCH_AT91RM9200) \ diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 0bb972b58336..5b0a23fd798b 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -581,14 +581,14 @@ static int ohci_hub_control ( break; case GetHubStatus: temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE); - *(__le32 *) buf = cpu_to_le32 (temp); + put_unaligned(cpu_to_le32 (temp), (__le32 *) buf); break; case GetPortStatus: if (!wIndex || wIndex > ports) goto error; wIndex--; temp = roothub_portstatus (ohci, wIndex); - *(__le32 *) buf = cpu_to_le32 (temp); + put_unaligned(cpu_to_le32 (temp), (__le32 *) buf); #ifndef OHCI_VERBOSE_DEBUG if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index dff60568b4a1..20861650905e 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -167,8 +167,6 @@ static int __devinit mmio_resource_enabled(struct pci_dev *pdev, int idx) static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) { void __iomem *base; - int wait_time; - u32 control; if (!mmio_resource_enabled(pdev, 0)) return; @@ -179,9 +177,10 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */ #ifndef __hppa__ - control = readl(base + OHCI_CONTROL); +{ + u32 control = readl(base + OHCI_CONTROL); if (control & OHCI_CTRL_IR) { - wait_time = 500; /* arbitrary; 5 seconds */ + int wait_time = 500; /* arbitrary; 5 seconds */ writel(OHCI_INTR_OC, base + OHCI_INTRENABLE); writel(OHCI_OCR, base + OHCI_CMDSTATUS); while (wait_time > 0 && @@ -198,6 +197,7 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) /* reset controller, preserving RWC */ writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL); } +} #endif /* diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index b9fb9687f926..8ea9c915fbf9 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1507,6 +1507,9 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104 #define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866 +#define USB_VENDOR_ID_WISEGROUP_LTD 0x6677 +#define USB_DEVICE_ID_SMARTJOY_DUAL_PLUS 0x8802 + #define USB_VENDOR_ID_CODEMERCS 0x07c0 #define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500 #define USB_DEVICE_ID_CODEMERCS_IOW24 0x1501 @@ -1670,6 +1673,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL }, { USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 }, diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index daa486dde8cf..88928a4be805 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -88,19 +88,19 @@ config USB_LED To compile this driver as a module, choose M here: the module will be called usbled. -config USB_CY7C63 +config USB_CYPRESS_CY7C63 tristate "Cypress CY7C63xxx USB driver support" depends on USB help Say Y here if you want to connect a Cypress CY7C63xxx - micro controller to your computer's USB port. This driver - supports the pre-programmed devices (incl. firmware) by - AK Modul-Bus Computer GmbH. + micro controller to your computer's USB port. Currently this + driver supports the pre-programmed devices (incl. firmware) + by AK Modul-Bus Computer GmbH. Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html To compile this driver as a module, choose M here: the - module will be called cy7c63. + module will be called cypress_cy7c63. config USB_CYTHERM tristate "Cypress USB thermometer driver support" diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index f25a97227297..2927260c5812 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -4,7 +4,7 @@ # obj-$(CONFIG_USB_AUERSWALD) += auerswald.o -obj-$(CONFIG_USB_CY7C63) += cy7c63.o +obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o obj-$(CONFIG_USB_CYTHERM) += cytherm.o obj-$(CONFIG_USB_EMI26) += emi26.o obj-$(CONFIG_USB_EMI62) += emi62.o diff --git a/drivers/usb/misc/cy7c63.c b/drivers/usb/misc/cy7c63.c deleted file mode 100644 index 8a1c10b89b76..000000000000 --- a/drivers/usb/misc/cy7c63.c +++ /dev/null @@ -1,244 +0,0 @@ -/* -* cy7c63.c -* -* Copyright (c) 2006 Oliver Bock (bock@fh-wolfenbuettel.de) -* -* This driver is based on the Cypress Thermometer USB Driver by -* Marcus Maul and the 2.0 version of Greg Kroah-Hartman's -* USB Skeleton driver. -* -* Is is a generic driver for the Cypress CY7C63000 family. -* For the time being it enables you to toggle the single I/O ports -* of the device. -* -* Supported vendors: AK Modul-Bus Computer GmbH -* Supported devices: CY7C63001A-PC (to be continued...) -* Supported functions: Read/Write Ports (to be continued...) -* -* Chipsets families: CY7C63000, CY7C63001, CY7C63100, CY7C63101 -* -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation, version 2. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/usb.h> - -#define DRIVER_AUTHOR "Oliver Bock (bock@fh-wolfenbuettel.de)" -#define DRIVER_DESC "Cypress CY7C63xxx USB driver" - -#define CY7C63_VENDOR_ID 0xa2c -#define CY7C63_PRODUCT_ID 0x8 - -#define CY7C63_READ_PORT 0x4 -#define CY7C63_WRITE_PORT 0x5 -#define CY7C63_READ_RAM 0x2 -#define CY7C63_WRITE_RAM 0x3 -#define CY7C63_READ_ROM 0x1 - -#define CY7C63_READ_PORT_ID0 0 -#define CY7C63_WRITE_PORT_ID0 0 -#define CY7C63_READ_PORT_ID1 0x2 -#define CY7C63_WRITE_PORT_ID1 1 - -#define CY7C63_MAX_REQSIZE 8 - - -/* table of devices that work with this driver */ -static struct usb_device_id cy7c63_table [] = { - { USB_DEVICE(CY7C63_VENDOR_ID, CY7C63_PRODUCT_ID) }, - { } -}; -MODULE_DEVICE_TABLE(usb, cy7c63_table); - -/* structure to hold all of our device specific stuff */ -struct cy7c63 { - struct usb_device * udev; - char port0; - char port1; -}; - -/* used to send usb control messages to device */ -int vendor_command(struct cy7c63 *dev, unsigned char request, - unsigned char address, unsigned char data) { - - int retval = 0; - unsigned int pipe; - unsigned char *iobuf; - - /* allocate some memory for the i/o buffer*/ - iobuf = kzalloc(CY7C63_MAX_REQSIZE, GFP_KERNEL); - if (!iobuf) { - dev_err(&dev->udev->dev, "Out of memory!\n"); - retval = -ENOMEM; - goto error; - } - - dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data); - - /* prepare usb control message and send it upstream */ - pipe = usb_rcvctrlpipe(dev->udev, 0); - retval = usb_control_msg(dev->udev, pipe, request, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER, - address, data, iobuf, CY7C63_MAX_REQSIZE, - USB_CTRL_GET_TIMEOUT); - - /* store returned data (more READs to be added!) */ - switch (request) { - case CY7C63_READ_PORT: - if (address == CY7C63_READ_PORT_ID0) { - dev->port0 = iobuf[1]; - dev_dbg(&dev->udev->dev, - "READ_PORT0 returned: %d\n",dev->port0); - } - else if (address == CY7C63_READ_PORT_ID1) { - dev->port1 = iobuf[1]; - dev_dbg(&dev->udev->dev, - "READ_PORT1 returned: %d\n",dev->port1); - } - break; - } - - kfree(iobuf); -error: - return retval; -} - -#define get_set_port(num,read_id,write_id) \ -static ssize_t set_port##num(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) { \ - \ - int value; \ - int result = 0; \ - \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct cy7c63 *cyp = usb_get_intfdata(intf); \ - \ - dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", num); \ - \ - /* validate input data */ \ - if (sscanf(buf, "%d", &value) < 1) { \ - result = -EINVAL; \ - goto error; \ - } \ - if (value>255 || value<0) { \ - result = -EINVAL; \ - goto error; \ - } \ - \ - result = vendor_command(cyp, CY7C63_WRITE_PORT, write_id, \ - (unsigned char)value); \ - \ - dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n",result); \ -error: \ - return result < 0 ? result : count; \ -} \ - \ -static ssize_t get_port##num(struct device *dev, \ - struct device_attribute *attr, char *buf) { \ - \ - int result = 0; \ - \ - struct usb_interface *intf = to_usb_interface(dev); \ - struct cy7c63 *cyp = usb_get_intfdata(intf); \ - \ - dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", num); \ - \ - result = vendor_command(cyp, CY7C63_READ_PORT, read_id, 0); \ - \ - dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result); \ - \ - return sprintf(buf, "%d", cyp->port##num); \ -} \ -static DEVICE_ATTR(port##num, S_IWUGO | S_IRUGO, get_port##num, set_port##num); - -get_set_port(0, CY7C63_READ_PORT_ID0, CY7C63_WRITE_PORT_ID0); -get_set_port(1, CY7C63_READ_PORT_ID1, CY7C63_WRITE_PORT_ID1); - -static int cy7c63_probe(struct usb_interface *interface, - const struct usb_device_id *id) { - - struct cy7c63 *dev = NULL; - int retval = -ENOMEM; - - /* allocate memory for our device state and initialize it */ - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (dev == NULL) { - dev_err(&dev->udev->dev, "Out of memory!\n"); - goto error; - } - - dev->udev = usb_get_dev(interface_to_usbdev(interface)); - - /* save our data pointer in this interface device */ - usb_set_intfdata(interface, dev); - - /* create device attribute files */ - device_create_file(&interface->dev, &dev_attr_port0); - device_create_file(&interface->dev, &dev_attr_port1); - - /* let the user know what node this device is now attached to */ - dev_info(&interface->dev, - "Cypress CY7C63xxx device now attached\n"); - - retval = 0; -error: - return retval; -} - -static void cy7c63_disconnect(struct usb_interface *interface) { - - struct cy7c63 *dev; - - dev = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); - - /* remove device attribute files */ - device_remove_file(&interface->dev, &dev_attr_port0); - device_remove_file(&interface->dev, &dev_attr_port1); - - usb_put_dev(dev->udev); - - dev_info(&interface->dev, - "Cypress CY7C63xxx device now disconnected\n"); - - kfree(dev); -} - -static struct usb_driver cy7c63_driver = { - .name = "cy7c63", - .probe = cy7c63_probe, - .disconnect = cy7c63_disconnect, - .id_table = cy7c63_table, -}; - -static int __init cy7c63_init(void) { - - int result; - - /* register this driver with the USB subsystem */ - result = usb_register(&cy7c63_driver); - if (result) { - err("Function usb_register failed! Error number: %d\n", result); - } - - return result; -} - -static void __exit cy7c63_exit(void) { - - /* deregister this driver with the USB subsystem */ - usb_deregister(&cy7c63_driver); -} - -module_init(cy7c63_init); -module_exit(cy7c63_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); - -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c new file mode 100644 index 000000000000..e091d327bd9e --- /dev/null +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -0,0 +1,279 @@ +/* +* cypress_cy7c63.c +* +* Copyright (c) 2006 Oliver Bock (o.bock@fh-wolfenbuettel.de) +* +* This driver is based on the Cypress USB Driver by Marcus Maul +* (cyport) and the 2.0 version of Greg Kroah-Hartman's +* USB Skeleton driver. +* +* This is a generic driver for the Cypress CY7C63xxx family. +* For the time being it enables you to read from and write to +* the single I/O ports of the device. +* +* Supported vendors: AK Modul-Bus Computer GmbH +* Supported devices: CY7C63001A-PC (to be continued...) +* Supported functions: Read/Write Ports (to be continued...) +* +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation, version 2. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/usb.h> + +#define DRIVER_AUTHOR "Oliver Bock (o.bock@fh-wolfenbuettel.de)" +#define DRIVER_DESC "Cypress CY7C63xxx USB driver" + +#define CYPRESS_VENDOR_ID 0xa2c +#define CYPRESS_PRODUCT_ID 0x8 + +#define CYPRESS_READ_PORT 0x4 +#define CYPRESS_WRITE_PORT 0x5 + +#define CYPRESS_READ_RAM 0x2 +#define CYPRESS_WRITE_RAM 0x3 +#define CYPRESS_READ_ROM 0x1 + +#define CYPRESS_READ_PORT_ID0 0 +#define CYPRESS_WRITE_PORT_ID0 0 +#define CYPRESS_READ_PORT_ID1 0x2 +#define CYPRESS_WRITE_PORT_ID1 1 + +#define CYPRESS_MAX_REQSIZE 8 + + +/* table of devices that work with this driver */ +static struct usb_device_id cypress_table [] = { + { USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) }, + { } +}; +MODULE_DEVICE_TABLE(usb, cypress_table); + +/* structure to hold all of our device specific stuff */ +struct cypress { + struct usb_device * udev; + unsigned char port[2]; +}; + +/* used to send usb control messages to device */ +static int vendor_command(struct cypress *dev, unsigned char request, + unsigned char address, unsigned char data) +{ + int retval = 0; + unsigned int pipe; + unsigned char *iobuf; + + /* allocate some memory for the i/o buffer*/ + iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL); + if (!iobuf) { + dev_err(&dev->udev->dev, "Out of memory!\n"); + retval = -ENOMEM; + goto error; + } + + dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data); + + /* prepare usb control message and send it upstream */ + pipe = usb_rcvctrlpipe(dev->udev, 0); + retval = usb_control_msg(dev->udev, pipe, request, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER, + address, data, iobuf, CYPRESS_MAX_REQSIZE, + USB_CTRL_GET_TIMEOUT); + + /* store returned data (more READs to be added) */ + switch (request) { + case CYPRESS_READ_PORT: + if (address == CYPRESS_READ_PORT_ID0) { + dev->port[0] = iobuf[1]; + dev_dbg(&dev->udev->dev, + "READ_PORT0 returned: %d\n", + dev->port[0]); + } + else if (address == CYPRESS_READ_PORT_ID1) { + dev->port[1] = iobuf[1]; + dev_dbg(&dev->udev->dev, + "READ_PORT1 returned: %d\n", + dev->port[1]); + } + break; + } + + kfree(iobuf); +error: + return retval; +} + +/* write port value */ +static ssize_t write_port(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count, + int port_num, int write_id) +{ + int value = -1; + int result = 0; + + struct usb_interface *intf = to_usb_interface(dev); + struct cypress *cyp = usb_get_intfdata(intf); + + dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", port_num); + + /* validate input data */ + if (sscanf(buf, "%d", &value) < 1) { + result = -EINVAL; + goto error; + } + if (value < 0 || value > 255) { + result = -EINVAL; + goto error; + } + + result = vendor_command(cyp, CYPRESS_WRITE_PORT, write_id, + (unsigned char)value); + + dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result); +error: + return result < 0 ? result : count; +} + +/* attribute callback handler (write) */ +static ssize_t set_port0_handler(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return write_port(dev, attr, buf, count, 0, CYPRESS_WRITE_PORT_ID0); +} + +/* attribute callback handler (write) */ +static ssize_t set_port1_handler(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return write_port(dev, attr, buf, count, 1, CYPRESS_WRITE_PORT_ID1); +} + +/* read port value */ +static ssize_t read_port(struct device *dev, struct device_attribute *attr, + char *buf, int port_num, int read_id) +{ + int result = 0; + + struct usb_interface *intf = to_usb_interface(dev); + struct cypress *cyp = usb_get_intfdata(intf); + + dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", port_num); + + result = vendor_command(cyp, CYPRESS_READ_PORT, read_id, 0); + + dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result); + + return sprintf(buf, "%d", cyp->port[port_num]); +} + +/* attribute callback handler (read) */ +static ssize_t get_port0_handler(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0); +} + +/* attribute callback handler (read) */ +static ssize_t get_port1_handler(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1); +} + +static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO, + get_port0_handler, set_port0_handler); + +static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO, + get_port1_handler, set_port1_handler); + + +static int cypress_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct cypress *dev = NULL; + int retval = -ENOMEM; + + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + dev_err(&dev->udev->dev, "Out of memory!\n"); + goto error; + } + + dev->udev = usb_get_dev(interface_to_usbdev(interface)); + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, dev); + + /* create device attribute files */ + device_create_file(&interface->dev, &dev_attr_port0); + device_create_file(&interface->dev, &dev_attr_port1); + + /* let the user know that the device is now attached */ + dev_info(&interface->dev, + "Cypress CY7C63xxx device now attached\n"); + + retval = 0; +error: + return retval; +} + +static void cypress_disconnect(struct usb_interface *interface) +{ + struct cypress *dev; + + dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + /* remove device attribute files */ + device_remove_file(&interface->dev, &dev_attr_port0); + device_remove_file(&interface->dev, &dev_attr_port1); + + usb_put_dev(dev->udev); + + dev_info(&interface->dev, + "Cypress CY7C63xxx device now disconnected\n"); + + kfree(dev); +} + +static struct usb_driver cypress_driver = { + .name = "cypress_cy7c63", + .probe = cypress_probe, + .disconnect = cypress_disconnect, + .id_table = cypress_table, +}; + +static int __init cypress_init(void) +{ + int result; + + /* register this driver with the USB subsystem */ + result = usb_register(&cypress_driver); + if (result) { + err("Function usb_register failed! Error number: %d\n", result); + } + + return result; +} + +static void __exit cypress_exit(void) +{ + /* deregister this driver with the USB subsystem */ + usb_deregister(&cypress_driver); +} + +module_init(cypress_init); +module_exit(cypress_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); + +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index c82c402285a0..e095772dd8e9 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -200,10 +200,8 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz /* create a urb, and a buffer for it, and copy the data to the urb */ urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) { - retval = -ENOMEM; - goto error; - } + if (!urb) + return -ENOMEM; buf = usb_buffer_alloc(dev->udev, count, GFP_KERNEL, &urb->transfer_dma); if (!buf) { diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index e02c1a30c4cd..f961a770cee2 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -64,7 +64,6 @@ struct mon_reader_text { }; static void mon_text_ctor(void *, kmem_cache_t *, unsigned long); -static void mon_text_dtor(void *, kmem_cache_t *, unsigned long); /* * mon_text_submit @@ -268,7 +267,7 @@ static int mon_text_open(struct inode *inode, struct file *file) (long)rp); rp->e_slab = kmem_cache_create(rp->slab_name, sizeof(struct mon_event_text), sizeof(long), 0, - mon_text_ctor, mon_text_dtor); + mon_text_ctor, NULL); if (rp->e_slab == NULL) { rc = -ENOMEM; goto err_slab; @@ -459,7 +458,3 @@ static void mon_text_ctor(void *mem, kmem_cache_t *slab, unsigned long sflags) memset(mem, 0xe5, sizeof(struct mon_event_text)); } -static void mon_text_dtor(void *mem, kmem_cache_t *slab, unsigned long sflags) -{ - ; -} diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c index 718f8e2b552b..e5e6e4f3ef87 100644 --- a/drivers/usb/net/rtl8150.c +++ b/drivers/usb/net/rtl8150.c @@ -128,11 +128,13 @@ #define VENDOR_ID_MELCO 0x0411 #define VENDOR_ID_MICRONET 0x3980 #define VENDOR_ID_LONGSHINE 0x07b8 +#define VENDOR_ID_ZYXEL 0x0586 #define PRODUCT_ID_RTL8150 0x8150 #define PRODUCT_ID_LUAKTX 0x0012 #define PRODUCT_ID_LCS8138TX 0x401a #define PRODUCT_ID_SP128AR 0x0003 +#define PRODUCT_ID_PRESTIGE 0x401a #undef EEPROM_WRITE @@ -142,6 +144,7 @@ static struct usb_device_id rtl8150_table[] = { {USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)}, {USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)}, {USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)}, + {USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)}, {} }; diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 8bd44fda5eaf..ac33bd47cfce 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -456,6 +456,17 @@ config USB_SERIAL_SAFE_PADDED bool "USB Secure Encapsulated Driver - Padded" depends on USB_SERIAL_SAFE +config USB_SERIAL_SIERRAWIRELESS + tristate "USB Sierra Wireless Driver" + depends on USB_SERIAL + help + Say M here if you want to use a Sierra Wireless device (if + using an PC 5220 or AC580 please use the Airprime driver + instead). + + To compile this driver as a module, choose M here: the + module will be called sierra. + config USB_SERIAL_TI tristate "USB TI 3410/5052 Serial Driver" depends on USB_SERIAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 5a0960fc9d3e..35d4acc7f1d3 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o +obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 94b9ba0ff875..62082532a8b3 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -13,7 +13,7 @@ #include <linux/tty.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static struct usb_device_id id_table [] = { { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */ diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c index 343f6f228220..01843ef8c11e 100644 --- a/drivers/usb/serial/anydata.c +++ b/drivers/usb/serial/anydata.c @@ -13,7 +13,7 @@ #include <linux/tty.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static struct usb_device_id id_table [] = { { USB_DEVICE(0x16d5, 0x6501) }, /* AirData CDMA device */ @@ -71,7 +71,7 @@ static int anydata_open(struct usb_serial_port *port, struct file *filp) port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, - usb_serial_generic_write_bulk_callback, port); + usb_serial_generic_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); if (result) dev_err(&port->dev, diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 8dec796222a0..970d9ef0a7a5 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -21,7 +21,7 @@ #include <linux/tty.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static int debug; diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 3faa7aa0111a..70ece9e01ce4 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -74,7 +74,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "belkin_sa.h" static int debug; diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index f2d993b70c18..6542f220468f 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -13,7 +13,7 @@ #include <linux/tty.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static int usb_serial_device_match (struct device *dev, struct device_driver *drv) { diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 3d456b32c316..3a9073dbfe6a 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -17,11 +17,10 @@ #include <linux/tty.h> #include <linux/console.h> #include <linux/usb.h> +#include <linux/usb/serial.h> static int debug; -#include "usb-serial.h" - struct usbcons_info { int magic; int break_flag; diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index df0a4f98b4ae..486c7411b9a7 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -26,7 +26,7 @@ #include <linux/moduleparam.h> #include <linux/usb.h> #include <asm/uaccess.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> /* * Version Information diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 49b51ab0d4cb..6286aba86fae 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -39,7 +39,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #define CYBERJACK_LOCAL_BUF_SIZE 32 diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 4ff2dfb299bd..ee70fddcab60 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -59,11 +59,11 @@ #include <linux/moduleparam.h> #include <linux/spinlock.h> #include <linux/usb.h> +#include <linux/usb/serial.h> #include <linux/serial.h> #include <linux/delay.h> #include <asm/uaccess.h> -#include "usb-serial.h" #include "cypress_m8.h" diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 6953d3ef5738..9b225183fc7a 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -246,7 +246,7 @@ #include <asm/uaccess.h> #include <linux/usb.h> #include <linux/wait.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> /* Defines */ diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 1e2b31eeb497..daafe405d86d 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -62,7 +62,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static int debug; diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c index debc3b0f9662..5169c2d154ab 100644 --- a/drivers/usb/serial/ezusb.c +++ b/drivers/usb/serial/ezusb.c @@ -15,7 +15,7 @@ #include <linux/tty.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ #define CPUCS_REG 0x7F92 diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8a74b19f1283..b458aedc5fb6 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -257,7 +257,7 @@ #include <asm/uaccess.h> #include <linux/usb.h> #include <linux/serial.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "ftdi_sio.h" /* @@ -313,6 +313,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, @@ -500,6 +501,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) }, + { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -548,11 +551,17 @@ struct ftdi_private { spinlock_t rx_lock; /* spinlock for receive state */ struct work_struct rx_work; int rx_processed; + unsigned long rx_bytes; __u16 interface; /* FT2232C port interface (0 for FT232/245) */ int force_baud; /* if non-zero, force the baud rate to this value */ int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */ + + spinlock_t tx_lock; /* spinlock for transmit state */ + unsigned long tx_bytes; + unsigned long tx_outstanding_bytes; + unsigned long tx_outstanding_urbs; }; /* Used for TIOCMIWAIT */ @@ -626,6 +635,9 @@ static struct usb_serial_driver ftdi_sio_device = { #define HIGH 1 #define LOW 0 +/* number of outstanding urbs to prevent userspace DoS from happening */ +#define URB_UPPER_LIMIT 42 + /* * *************************************************************************** * Utlity functions @@ -1156,6 +1168,7 @@ static int ftdi_sio_attach (struct usb_serial *serial) } spin_lock_init(&priv->rx_lock); + spin_lock_init(&priv->tx_lock); init_waitqueue_head(&priv->delta_msr_wait); /* This will push the characters through immediately rather than queue a task to deliver them */ @@ -1270,6 +1283,13 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) dbg("%s", __FUNCTION__); + spin_lock_irqsave(&priv->tx_lock, flags); + priv->tx_bytes = 0; + spin_unlock_irqrestore(&priv->tx_lock, flags); + spin_lock_irqsave(&priv->rx_lock, flags); + priv->rx_bytes = 0; + spin_unlock_irqrestore(&priv->rx_lock, flags); + if (port->tty) port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; @@ -1372,6 +1392,7 @@ static int ftdi_write (struct usb_serial_port *port, int data_offset ; /* will be 1 for the SIO and 0 otherwise */ int status; int transfer_size; + unsigned long flags; dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count); @@ -1379,6 +1400,13 @@ static int ftdi_write (struct usb_serial_port *port, dbg("write request of 0 bytes"); return 0; } + spin_lock_irqsave(&priv->tx_lock, flags); + if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) { + spin_unlock_irqrestore(&priv->tx_lock, flags); + dbg("%s - write limit hit\n", __FUNCTION__); + return 0; + } + spin_unlock_irqrestore(&priv->tx_lock, flags); data_offset = priv->write_offset; dbg("data_offset set to %d",data_offset); @@ -1445,6 +1473,12 @@ static int ftdi_write (struct usb_serial_port *port, err("%s - failed submitting write urb, error %d", __FUNCTION__, status); count = status; kfree (buffer); + } else { + spin_lock_irqsave(&priv->tx_lock, flags); + ++priv->tx_outstanding_urbs; + priv->tx_outstanding_bytes += count; + priv->tx_bytes += count; + spin_unlock_irqrestore(&priv->tx_lock, flags); } /* we are done with this urb, so let the host driver @@ -1460,7 +1494,11 @@ static int ftdi_write (struct usb_serial_port *port, static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs) { + unsigned long flags; struct usb_serial_port *port = (struct usb_serial_port *)urb->context; + struct ftdi_private *priv; + int data_offset; /* will be 1 for the SIO and 0 otherwise */ + unsigned long countback; /* free up the transfer buffer, as usb_free_urb() does not do this */ kfree (urb->transfer_buffer); @@ -1472,34 +1510,67 @@ static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs) return; } + priv = usb_get_serial_port_data(port); + if (!priv) { + dbg("%s - bad port private data pointer - exiting", __FUNCTION__); + return; + } + /* account for transferred data */ + countback = urb->actual_length; + data_offset = priv->write_offset; + if (data_offset > 0) { + /* Subtract the control bytes */ + countback -= (data_offset * ((countback + (PKTSZ - 1)) / PKTSZ)); + } + spin_lock_irqsave(&priv->tx_lock, flags); + --priv->tx_outstanding_urbs; + priv->tx_outstanding_bytes -= countback; + spin_unlock_irqrestore(&priv->tx_lock, flags); + usb_serial_port_softint(port); } /* ftdi_write_bulk_callback */ static int ftdi_write_room( struct usb_serial_port *port ) { + struct ftdi_private *priv = usb_get_serial_port_data(port); + int room; + unsigned long flags; + dbg("%s - port %d", __FUNCTION__, port->number); - /* - * We really can take anything the user throws at us - * but let's pick a nice big number to tell the tty - * layer that we have lots of free space - */ - return 2048; + spin_lock_irqsave(&priv->tx_lock, flags); + if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) { + /* + * We really can take anything the user throws at us + * but let's pick a nice big number to tell the tty + * layer that we have lots of free space + */ + room = 2048; + } else { + room = 0; + } + spin_unlock_irqrestore(&priv->tx_lock, flags); + return room; } /* ftdi_write_room */ static int ftdi_chars_in_buffer (struct usb_serial_port *port) { /* ftdi_chars_in_buffer */ + struct ftdi_private *priv = usb_get_serial_port_data(port); + int buffered; + unsigned long flags; + dbg("%s - port %d", __FUNCTION__, port->number); - /* - * We can't really account for how much data we - * have sent out, but hasn't made it through to the - * device, so just tell the tty layer that everything - * is flushed. - */ - return 0; + spin_lock_irqsave(&priv->tx_lock, flags); + buffered = (int)priv->tx_outstanding_bytes; + spin_unlock_irqrestore(&priv->tx_lock, flags); + if (buffered < 0) { + err("%s outstanding tx bytes is negative!", __FUNCTION__); + buffered = 0; + } + return buffered; } /* ftdi_chars_in_buffer */ @@ -1509,6 +1580,8 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs) struct usb_serial_port *port = (struct usb_serial_port *)urb->context; struct tty_struct *tty; struct ftdi_private *priv; + unsigned long countread; + unsigned long flags; if (urb->number_of_packets > 0) { err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__, @@ -1543,6 +1616,13 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs) return; } + /* count data bytes, but not status bytes */ + countread = urb->actual_length; + countread -= 2 * ((countread + (PKTSZ - 1)) / PKTSZ); + spin_lock_irqsave(&priv->rx_lock, flags); + priv->rx_bytes += countread; + spin_unlock_irqrestore(&priv->rx_lock, flags); + ftdi_process_read(port); } /* ftdi_read_bulk_callback */ diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 6ab2ac845bd7..04ef90fcb876 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -36,6 +36,9 @@ #define FTDI_ACTZWAVE_PID 0xF2D0 +/* www.starting-point-systems.com µChameleon device */ +#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ + /* www.irtrans.de device */ #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ @@ -442,6 +445,18 @@ */ #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ +/* + * ThorLabs USB motor drivers + */ +#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ + +/* + * Testo products (http://www.testo.com/) + * Submitted by Colin Leroy + */ +#define TESTO_VID 0x128D +#define TESTO_USB_INTERFACE_PID 0x0001 + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index 803721b97e2e..77b977206a8c 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -13,7 +13,7 @@ #include <linux/tty.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static struct usb_device_id id_table [] = { { USB_DEVICE(0x1404, 0xcddc) }, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 1f5d1620baa1..727852634be9 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -35,6 +35,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> +#include <linux/usb/serial.h> /* the mode to be set when the port ist opened */ static int initial_mode = 1; @@ -42,8 +43,6 @@ static int initial_mode = 1; /* debug flag */ static int debug = 0; -#include "usb-serial.h" - #define GARMIN_VENDOR_ID 0x091E /* diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 945b8bb38c92..172713556393 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -17,8 +17,8 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/usb.h> +#include <linux/usb/serial.h> #include <asm/uaccess.h> -#include "usb-serial.h" static int debug; @@ -285,6 +285,7 @@ void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *reg if (result) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); } +EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback); void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs) { diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 7e06358b0310..ebcac701b069 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -17,7 +17,7 @@ #include <linux/tty.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> /* * Version Information diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index bd2c05dac2a9..c49976c3ad52 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -44,7 +44,7 @@ #include <linux/wait.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "io_edgeport.h" #include "io_ionsp.h" /* info for the iosp messages */ #include "io_16654.h" /* 16654 UART defines */ diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 723a12ae87b5..17c5b1d2311a 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -39,8 +39,8 @@ #include <asm/uaccess.h> #include <asm/semaphore.h> #include <linux/usb.h> +#include <linux/usb/serial.h> -#include "usb-serial.h" #include "io_16654.h" #include "io_usbvend.h" #include "io_ti.h" diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index dbcfe172a5cc..59c5d999009a 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -55,7 +55,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "ipaq.h" #define KP_RETRIES 100 @@ -70,6 +70,8 @@ static __u16 product, vendor; static int debug; +static int connect_retries = KP_RETRIES; +static int initial_wait; /* Function prototypes for an ipaq */ static int ipaq_open (struct usb_serial_port *port, struct file *filp); @@ -582,7 +584,7 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) struct ipaq_private *priv; struct ipaq_packet *pkt; int i, result = 0; - int retries = KP_RETRIES; + int retries = connect_retries; dbg("%s - port %d", __FUNCTION__, port->number); @@ -646,16 +648,12 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) port->read_urb->transfer_buffer_length = URBDATA_SIZE; port->bulk_out_size = port->write_urb->transfer_buffer_length = URBDATA_SIZE; + msleep(1000*initial_wait); /* Start reading from the device */ usb_fill_bulk_urb(port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, ipaq_read_bulk_callback, port); - result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) { - err("%s - failed submitting read urb, error %d", __FUNCTION__, result); - goto error; - } /* * Send out control message observed in win98 sniffs. Not sure what @@ -670,8 +668,14 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp) usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21, 0x1, 0, NULL, 0, 100); if (result == 0) { + result = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (result) { + err("%s - failed submitting read urb, error %d", __FUNCTION__, result); + goto error; + } return 0; } + msleep(1000); } err("%s - failed doing control urb, error %d", __FUNCTION__, result); goto error; @@ -854,6 +858,7 @@ static void ipaq_write_bulk_callback(struct urb *urb, struct pt_regs *regs) if (urb->status) { dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); + return; } spin_lock_irqsave(&write_list_lock, flags); @@ -966,3 +971,9 @@ MODULE_PARM_DESC(vendor, "User specified USB idVendor"); module_param(product, ushort, 0); MODULE_PARM_DESC(product, "User specified USB idProduct"); + +module_param(connect_retries, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(connect_retries, "Maximum number of connect retries (one second each)"); + +module_param(initial_wait, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(initial_wait, "Time to wait before attempting a connection (in seconds)"); diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index a4a0bfeaab00..87306cb6f9f5 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -46,8 +46,8 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/usb.h> +#include <linux/usb/serial.h> #include <asm/uaccess.h> -#include "usb-serial.h" /* * Version Information @@ -373,6 +373,8 @@ static void ipw_write_bulk_callback(struct urb *urb, struct pt_regs *regs) dbg("%s", __FUNCTION__); + port->write_urb_busy = 0; + if (urb->status) dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 2cf1fed3de43..1738b0b6a376 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -57,7 +57,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> /* * Version Information diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index d7c58f1bc960..015ad6cc1bbb 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -107,7 +107,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "keyspan.h" static int debug; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 03ab3c0f3cce..49b8dc039d1f 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -78,6 +78,7 @@ #include <linux/workqueue.h> #include <asm/uaccess.h> #include <linux/usb.h> +#include <linux/usb/serial.h> static int debug; @@ -107,8 +108,6 @@ struct ezusb_hex_record { #include "xircom_pgs_fw.h" #endif -#include "usb-serial.h" - /* * Version Information */ diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index b45ff3e7ab40..2a2f3e2da055 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -55,7 +55,7 @@ #include <linux/module.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "kl5kusb105.h" static int debug; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 457733374772..d50dce034958 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -46,8 +46,8 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> +#include <linux/usb/serial.h> #include <linux/ioctl.h> -#include "usb-serial.h" #include "kobil_sct.h" static int debug; diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index ca05d3275f3e..f4d4305c2c02 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -75,7 +75,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "mct_u232.h" /* diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 7f544081032e..ac3f8b5d2c49 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -14,7 +14,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static int debug; diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index cfb711a21a45..e49f40913c27 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -46,7 +46,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> static int debug; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 78ad4b3126a6..f0530c1d7b7a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -35,6 +35,7 @@ 2006-06-01 v0.6.2 add backwards-compatibility stuff 2006-06-01 v0.6.3 add Novatel Wireless 2006-06-01 v0.7 Option => GSM + 2006-06-01 v0.7.1 add COBRA2 Work sponsored by: Sigos GmbH, Germany <info@sigos.de> @@ -53,7 +54,7 @@ device features. */ -#define DRIVER_VERSION "v0.7.0" +#define DRIVER_VERSION "v0.7.1" #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>" #define DRIVER_DESC "USB Driver for GSM modems" @@ -64,7 +65,7 @@ #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> /* Function prototypes */ static int option_open(struct usb_serial_port *port, struct file *filp); @@ -102,6 +103,7 @@ static int option_send_setup(struct usb_serial_port *port); #define OPTION_PRODUCT_FUSION 0x6000 #define OPTION_PRODUCT_FUSION2 0x6300 #define OPTION_PRODUCT_COBRA 0x6500 +#define OPTION_PRODUCT_COBRA2 0x6600 #define HUAWEI_PRODUCT_E600 0x1001 #define AUDIOVOX_PRODUCT_AIRCARD 0x0112 #define SIERRAWIRELESS_PRODUCT_MC8755 0x6802 @@ -112,6 +114,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) }, @@ -124,6 +127,7 @@ static struct usb_device_id option_ids1[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index de93a2b909e7..259db31b65c1 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -27,7 +27,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "pl2303.h" /* @@ -52,6 +52,7 @@ struct pl2303_buf { static struct usb_device_id id_table [] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, @@ -79,6 +80,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) }, { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) }, { USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) }, + { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 7f29e81d3e35..d9c1e6e0b4b3 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -10,6 +10,7 @@ #define PL2303_VENDOR_ID 0x067b #define PL2303_PRODUCT_ID 0x2303 #define PL2303_PRODUCT_ID_RSAQ2 0x04bb +#define PL2303_PRODUCT_ID_DCU11 0x1234 #define PL2303_PRODUCT_ID_PHAROS 0xaaa0 #define PL2303_PRODUCT_ID_RSAQ3 0xaaa2 @@ -84,3 +85,7 @@ /* Ours Technology Inc DKU-5 clone, chipset: Prolific Technology Inc */ #define OTI_VENDOR_ID 0x0ea0 #define OTI_PRODUCT_ID 0x6858 + +/* DATAPILOT Universal-2 Phone Cable */ +#define DATAPILOT_U2_VENDOR_ID 0x0731 +#define DATAPILOT_U2_PRODUCT_ID 0x2003 diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 897d8447252b..789771ecdb11 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -71,7 +71,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #ifndef CONFIG_USB_SAFE_PADDED diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c new file mode 100644 index 000000000000..d29638daa987 --- /dev/null +++ b/drivers/usb/serial/sierra.c @@ -0,0 +1,75 @@ +/* + * Sierra Wireless CDMA Wireless Serial USB driver + * + * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com> + * Original Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +static struct usb_device_id id_table [] = { + { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ + { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ + { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ + { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ + { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ + { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */ + { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */ + { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */ + /* Following devices are supported in the airprime.c driver */ + /* { USB_DEVICE(0x1199, 0x0112) }, */ /* Sierra Wireless AirCard 580 */ + /* { USB_DEVICE(0x0F3D, 0x0112) }, */ /* AirPrime/Sierra PC 5220 */ + { } +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver sierra_driver = { + .name = "sierra_wireless", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, +}; + +static struct usb_serial_driver sierra_device = { + .driver = { + .owner = THIS_MODULE, + .name = "Sierra_Wireless", + }, + .id_table = id_table, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, + .num_ports = 3, +}; + +static int __init sierra_init(void) +{ + int retval; + + retval = usb_serial_register(&sierra_device); + if (retval) + return retval; + retval = usb_register(&sierra_driver); + if (retval) + usb_serial_deregister(&sierra_device); + return retval; +} + +static void __exit sierra_exit(void) +{ + usb_deregister(&sierra_driver); + usb_serial_deregister(&sierra_device); +} + +module_init(sierra_init); +module_exit(sierra_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index a9afff31a921..ac9b8ee52d44 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -83,8 +83,8 @@ #include <asm/uaccess.h> #include <asm/semaphore.h> #include <linux/usb.h> +#include <linux/usb/serial.h> -#include "usb-serial.h" #include "ti_usb_3410_5052.h" #include "ti_fw_3410.h" /* firmware image for 3410 */ #include "ti_fw_5052.h" /* firmware image for 5052 */ diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index b59a0536ea5c..12c1694d322e 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -31,7 +31,7 @@ #include <linux/smp_lock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "pl2303.h" /* @@ -40,6 +40,8 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/" #define DRIVER_DESC "USB Serial Driver core" +static void port_free(struct usb_serial_port *port); + /* Driver structure we register with the USB core */ static struct usb_driver usb_serial_driver = { .name = "usbserial", @@ -146,23 +148,10 @@ static void destroy_serial(struct kref *kref) port = serial->port[i]; if (!port) continue; - usb_kill_urb(port->read_urb); - usb_free_urb(port->read_urb); - usb_kill_urb(port->write_urb); - usb_free_urb(port->write_urb); - usb_kill_urb(port->interrupt_in_urb); - usb_free_urb(port->interrupt_in_urb); - usb_kill_urb(port->interrupt_out_urb); - usb_free_urb(port->interrupt_out_urb); - kfree(port->bulk_in_buffer); - kfree(port->bulk_out_buffer); - kfree(port->interrupt_in_buffer); - kfree(port->interrupt_out_buffer); + port_free(port); } } - flush_scheduled_work(); /* port->work */ - usb_put_dev(serial->dev); /* free up any memory that we allocated */ @@ -564,6 +553,11 @@ static void port_release(struct device *dev) struct usb_serial_port *port = to_usb_serial_port(dev); dbg ("%s - %s", __FUNCTION__, dev->bus_id); + port_free(port); +} + +static void port_free(struct usb_serial_port *port) +{ usb_kill_urb(port->read_urb); usb_free_urb(port->read_urb); usb_kill_urb(port->write_urb); @@ -576,6 +570,7 @@ static void port_release(struct device *dev) kfree(port->bulk_out_buffer); kfree(port->interrupt_in_buffer); kfree(port->interrupt_out_buffer); + flush_scheduled_work(); /* port->work */ kfree(port); } diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 95a2936e902e..88949f7884ca 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -25,7 +25,7 @@ #include <linux/spinlock.h> #include <asm/uaccess.h> #include <linux/usb.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "visor.h" /* @@ -302,7 +302,6 @@ static int visor_open (struct usb_serial_port *port, struct file *filp) spin_lock_irqsave(&priv->lock, flags); priv->bytes_in = 0; priv->bytes_out = 0; - priv->outstanding_urbs = 0; priv->throttled = 0; spin_unlock_irqrestore(&priv->lock, flags); @@ -435,13 +434,25 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf, static int visor_write_room (struct usb_serial_port *port) { + struct visor_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + dbg("%s - port %d", __FUNCTION__, port->number); /* * We really can take anything the user throws at us * but let's pick a nice big number to tell the tty - * layer that we have lots of free space + * layer that we have lots of free space, unless we don't. */ + + spin_lock_irqsave(&priv->lock, flags); + if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) { + spin_unlock_irqrestore(&priv->lock, flags); + dbg("%s - write limit hit\n", __FUNCTION__); + return 0; + } + spin_unlock_irqrestore(&priv->lock, flags); + return 2048; } @@ -758,15 +769,22 @@ static int visor_calc_num_ports (struct usb_serial *serial) static int generic_startup(struct usb_serial *serial) { + struct usb_serial_port **ports = serial->port; struct visor_private *priv; int i; for (i = 0; i < serial->num_ports; ++i) { priv = kzalloc (sizeof(*priv), GFP_KERNEL); - if (!priv) + if (!priv) { + while (i-- != 0) { + priv = usb_get_serial_port_data(ports[i]); + usb_set_serial_port_data(ports[i], NULL); + kfree(priv); + } return -ENOMEM; + } spin_lock_init(&priv->lock); - usb_set_serial_port_data(serial->port[i], priv); + usb_set_serial_port_data(ports[i], priv); } return 0; } @@ -876,7 +894,18 @@ static int clie_5_attach (struct usb_serial *serial) static void visor_shutdown (struct usb_serial *serial) { + struct visor_private *priv; + int i; + dbg("%s", __FUNCTION__); + + for (i = 0; i < serial->num_ports; i++) { + priv = usb_get_serial_port_data(serial->port[i]); + if (priv) { + usb_set_serial_port_data(serial->port[i], NULL); + kfree(priv); + } + } } static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 540438c3f381..6e6c7934be32 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -79,7 +79,7 @@ #include <linux/usb.h> #include <linux/serial_reg.h> #include <linux/serial.h> -#include "usb-serial.h" +#include <linux/usb/serial.h> #include "whiteheat_fw.h" /* firmware for the ConnectTech WhiteHEAT device */ #include "whiteheat.h" /* WhiteHEAT specific commands */ diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 5715291ba540..a4b7df9ff8c1 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -112,13 +112,11 @@ static int slave_configure(struct scsi_device *sdev) if (sdev->scsi_level < SCSI_2) sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2; - /* According to the technical support people at Genesys Logic, - * devices using their chips have problems transferring more than - * 32 KB at a time. In practice people have found that 64 KB - * works okay and that's what Windows does. But we'll be - * conservative; people can always use the sysfs interface to - * increase max_sectors. */ - if (le16_to_cpu(us->pusb_dev->descriptor.idVendor) == USB_VENDOR_ID_GENESYS && + /* Many devices have trouble transfering more than 32KB at a time, + * while others have trouble with more than 64K. At this time we + * are limiting both to 32K (64 sectores). + */ + if ((us->flags & US_FL_MAX_SECTORS_64) && sdev->request_queue->max_sectors > 64) blk_queue_max_sectors(sdev->request_queue, 64); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index c7e84e653df9..a5ca449f6e64 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -112,6 +112,19 @@ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), +/* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */ +UNUSUAL_DEV( 0x0419, 0x0100, 0x0100, 0x0100, + "Samsung Info. Systems America, Inc.", + "MP3 Player", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + +/* Reported by Orgad Shaneh <orgads@gmail.com> */ +UNUSUAL_DEV( 0x0419, 0xaace, 0x0100, 0x0100, + "Samsung", "MP3 Player", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Reported by Christian Leber <christian@leber.de> */ UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100, "TrekStor", @@ -132,6 +145,14 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and + * Einar Th. Einarsson <einarthered@gmail.com> */ +UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100, + "Nokia", + "N91", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + /* Reported by Jiri Slaby <jirislaby@gmail.com> and * Rene C. Castberg <Rene@Castberg.org> */ UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100, @@ -140,6 +161,13 @@ UNUSUAL_DEV( 0x0421, 0x0446, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), +/* Reported by Matthew Bloch <matthew@bytemark.co.uk> */ +UNUSUAL_DEV( 0x0421, 0x044e, 0x0100, 0x0100, + "Nokia", + "E61", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", @@ -473,10 +501,11 @@ UNUSUAL_DEV( 0x054c, 0x0010, 0x0106, 0x0450, US_SC_SCSI, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ), -/* This entry is needed because the device reports Sub=ff */ -UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0600, +/* Submitted by Lars Jacob <jacob.lars@googlemail.com> + * This entry is needed because the device reports Sub=ff */ +UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0610, "Sony", - "DSC-T1/T5", + "DSC-T1/T5/H5", US_SC_8070, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), @@ -708,18 +737,22 @@ UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113, * They were originally reported by Alexander Oltu * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com> * respectively. + * + * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz + * <phil@ipom.com> as these flags were made and hard-coded + * special-cases were pulled from scsiglue.c. */ UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Optical", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_GO_SLOW ), + US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ), UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Disk", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_GO_SLOW ), + US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ), /* Reported by Hanno Boeck <hanno@gmx.de> * Taken from the Lycoris Kernel */ @@ -1196,6 +1229,14 @@ UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Benjamin Schiller <sbenni@gmx.de> + * It is also sold by Easylite as DJ 20 */ +UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103, + "Typhoon", + "My DJ 1820", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64), + /* Reported by Michael Stattmann <michael@stattmann.com> */ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, "Sony Ericsson", @@ -1227,6 +1268,15 @@ UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* patch submitted by Davide Perini <perini.davide@dpsoftware.org> + * and Renato Perini <rperini@email.it> + */ +UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001, + "Motorola", + "RAZR V3x", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), + /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, "MPIO", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 1185acac4b21..5ee19be52f65 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -55,6 +55,7 @@ #include <linux/slab.h> #include <linux/kthread.h> #include <linux/mutex.h> +#include <linux/utsrelease.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -373,8 +374,12 @@ static int usb_stor_control_thread(void * __us) /* lock access to the state */ scsi_lock(host); + /* did the command already complete because of a disconnect? */ + if (!us->srb) + ; /* nothing to do */ + /* indicate that the command is done */ - if (us->srb->result != DID_ABORT << 16) { + else if (us->srb->result != DID_ABORT << 16) { US_DEBUGP("scsi cmd done, result=0x%x\n", us->srb->result); us->srb->scsi_done(us->srb); @@ -524,7 +529,8 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id) if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE)) printk(KERN_NOTICE USB_STORAGE "This device " "(%04x,%04x,%04x S %02x P %02x)" - " has %s in unusual_devs.h\n" + " has %s in unusual_devs.h (kernel" + " %s)\n" " Please send a copy of this message to " "<linux-usb-devel@lists.sourceforge.net>\n", le16_to_cpu(ddesc->idVendor), @@ -532,7 +538,8 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id) le16_to_cpu(ddesc->bcdDevice), idesc->bInterfaceSubClass, idesc->bInterfaceProtocol, - msgs[msg]); + msgs[msg], + UTS_RELEASE); } } @@ -836,32 +843,34 @@ static void dissociate_dev(struct us_data *us) * the host */ static void quiesce_and_remove_host(struct us_data *us) { + struct Scsi_Host *host = us_to_host(us); + /* Prevent new USB transfers, stop the current command, and * interrupt a SCSI-scan or device-reset delay */ + scsi_lock(host); set_bit(US_FLIDX_DISCONNECTING, &us->flags); + scsi_unlock(host); usb_stor_stop_transport(us); wake_up(&us->delay_wait); /* It doesn't matter if the SCSI-scanning thread is still running. * The thread will exit when it sees the DISCONNECTING flag. */ - /* Wait for the current command to finish, then remove the host */ - mutex_lock(&us->dev_mutex); - mutex_unlock(&us->dev_mutex); - /* queuecommand won't accept any new commands and the control * thread won't execute a previously-queued command. If there * is such a command pending, complete it with an error. */ + mutex_lock(&us->dev_mutex); if (us->srb) { us->srb->result = DID_NO_CONNECT << 16; - scsi_lock(us_to_host(us)); + scsi_lock(host); us->srb->scsi_done(us->srb); us->srb = NULL; - scsi_unlock(us_to_host(us)); + scsi_unlock(host); } + mutex_unlock(&us->dev_mutex); /* Now we own no commands so it's safe to remove the SCSI host */ - scsi_remove_host(us_to_host(us)); + scsi_remove_host(host); } /* Second stage of disconnect processing: deallocate all resources */ diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 5284abe1b5eb..21f3ddbc9080 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -176,8 +176,4 @@ extern void fill_inquiry_response(struct us_data *us, #define scsi_unlock(host) spin_unlock_irq(host->host_lock) #define scsi_lock(host) spin_lock_irq(host->host_lock) - -/* Vendor ID list for devices that require special handling */ -#define USB_VENDOR_ID_GENESYS 0x05e3 /* Genesys Logic */ - #endif diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c index af492cc48db2..d93eb626b2f0 100644 --- a/drivers/w1/masters/ds2482.c +++ b/drivers/w1/masters/ds2482.c @@ -218,7 +218,7 @@ static int ds2482_wait_1wire_idle(struct ds2482_data *pdev) do { temp = i2c_smbus_read_byte(&pdev->client); } while ((temp >= 0) && (temp & DS2482_REG_STS_1WB) && - (++retries > DS2482_WAIT_IDLE_TIMEOUT)); + (++retries < DS2482_WAIT_IDLE_TIMEOUT)); } if (retries > DS2482_WAIT_IDLE_TIMEOUT) diff --git a/drivers/w1/w1_io.h b/drivers/w1/w1_io.h deleted file mode 100644 index 9a76d2ad69c5..000000000000 --- a/drivers/w1/w1_io.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * w1_io.h - * - * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __W1_IO_H -#define __W1_IO_H - -#include "w1.h" - -u8 w1_triplet(struct w1_master *dev, int bdir); -void w1_write_8(struct w1_master *, u8); -int w1_reset_bus(struct w1_master *); -u8 w1_calc_crc8(u8 *, int); -void w1_write_block(struct w1_master *, const u8 *, int); -u8 w1_read_block(struct w1_master *, u8 *, int); -void w1_search_devices(struct w1_master *dev, w1_slave_found_callback cb); -int w1_reset_select_slave(struct w1_slave *sl); - -#endif /* __W1_IO_H */ diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 5612dfeeae50..d42c83399071 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -97,7 +97,7 @@ extern struct resource iomem_resource; extern int request_resource(struct resource *root, struct resource *new); extern struct resource * ____request_resource(struct resource *root, struct resource *new); extern int release_resource(struct resource *new); -extern __deprecated_for_modules int insert_resource(struct resource *parent, struct resource *new); +extern int insert_resource(struct resource *parent, struct resource *new); extern int allocate_resource(struct resource *root, struct resource *new, resource_size_t size, resource_size_t min, resource_size_t max, resource_size_t align, diff --git a/include/linux/pci.h b/include/linux/pci.h index 983fca251b25..8565b81d7fbc 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -161,6 +161,7 @@ struct pci_dev { unsigned int is_enabled:1; /* pci_enable_device has been called */ unsigned int is_busmaster:1; /* device is busmaster */ unsigned int no_msi:1; /* device may not use msi */ + unsigned int no_d1d2:1; /* only allow d0 or d3 */ unsigned int block_ucfg_access:1; /* userspace config space access is blocked */ unsigned int broken_parity_status:1; /* Device generates false positive parity */ unsigned int msi_enabled:1; diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 6bce4a240364..96930cb5927c 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -422,7 +422,23 @@ #define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ #define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ #define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ +/* Correctable Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 +/* Non-fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 +/* Fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 #define PCI_ERR_ROOT_STATUS 48 +#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ +/* Multi ERR_COR Received */ +#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 +/* ERR_FATAL/NONFATAL Recevied */ +#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 +/* Multi ERR_FATAL/NONFATAL Recevied */ +#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 +#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */ +#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ +#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ #define PCI_ERR_ROOT_COR_SRC 52 #define PCI_ERR_ROOT_SRC 54 diff --git a/include/linux/pm_legacy.h b/include/linux/pm_legacy.h index 78027c533b94..514729a44688 100644 --- a/include/linux/pm_legacy.h +++ b/include/linux/pm_legacy.h @@ -15,11 +15,6 @@ struct pm_dev __deprecated * pm_register(pm_dev_t type, unsigned long id, pm_callback callback); /* - * Unregister all devices with matching callback - */ -void __deprecated pm_unregister_all(pm_callback callback); - -/* * Send a request to all devices */ int __deprecated pm_send_all(pm_request_t rqst, void *data); @@ -35,8 +30,6 @@ static inline struct pm_dev *pm_register(pm_dev_t type, return NULL; } -static inline void pm_unregister_all(pm_callback callback) {} - static inline int pm_send_all(pm_request_t rqst, void *data) { return 0; diff --git a/include/linux/usb.h b/include/linux/usb.h index 8dead32e7ebf..c944e8f06a4a 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -48,7 +48,7 @@ struct ep_device; * @urb_list: urbs queued to this endpoint; maintained by usbcore * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH) * with one or more transfer descriptors (TDs) per urb - * @kobj: kobject for sysfs info + * @ep_dev: ep_device for sysfs info * @extra: descriptors following this endpoint in the configuration * @extralen: how many bytes of "extra" are valid * diff --git a/drivers/usb/serial/usb-serial.h b/include/linux/usb/serial.h index 0f2802a60194..91c983eef899 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/include/linux/usb/serial.h @@ -1,12 +1,12 @@ /* - * USB Serial Converter driver + * USB Serial Converter stuff * * Copyright (C) 1999 - 2005 * Greg Kroah-Hartman (greg@kroah.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. + * the Free Software Foundation; version 2 of the License. * */ @@ -171,7 +171,7 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * but before the device has been fully initialized by the usb_serial * subsystem. Use this function to download any firmware to the device, * or any other early initialization that might be needed. - * Return 0 to continue on with the initialization sequence. Anything + * Return 0 to continue on with the initialization sequence. Anything * else will abort it. * @attach: pointer to the driver's attach function. * This will be called when the struct usb_serial structure is fully set diff --git a/include/linux/usb_ch9.h b/include/linux/usb_ch9.h index a2aacfc7af2f..c720d107ff29 100644 --- a/include/linux/usb_ch9.h +++ b/include/linux/usb_ch9.h @@ -51,6 +51,9 @@ #define USB_RECIP_INTERFACE 0x01 #define USB_RECIP_ENDPOINT 0x02 #define USB_RECIP_OTHER 0x03 +/* From Wireless USB 1.0 */ +#define USB_RECIP_PORT 0x04 +#define USB_RECIP_RPIPE 0x05 /* * Standard requests, for the bRequest field of a SETUP packet. @@ -73,7 +76,9 @@ #define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ #define USB_REQ_GET_ENCRYPTION 0x0E +#define USB_REQ_RPIPE_ABORT 0x0E #define USB_REQ_SET_HANDSHAKE 0x0F +#define USB_REQ_RPIPE_RESET 0x0F #define USB_REQ_GET_HANDSHAKE 0x10 #define USB_REQ_SET_CONNECTION 0x11 #define USB_REQ_SET_SECURITY_DATA 0x12 @@ -159,6 +164,8 @@ struct usb_ctrlrequest { #define USB_DT_BOS 0x0f #define USB_DT_DEVICE_CAPABILITY 0x10 #define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 +#define USB_DT_WIRE_ADAPTER 0x21 +#define USB_DT_RPIPE 0x22 /* conventional codes for class-specific descriptors */ #define USB_DT_CS_DEVICE 0x21 diff --git a/include/linux/usb_gadget.h b/include/linux/usb_gadget.h index 1d78870ed8af..e17186dbcdca 100644 --- a/include/linux/usb_gadget.h +++ b/include/linux/usb_gadget.h @@ -872,9 +872,9 @@ int usb_gadget_config_buf(const struct usb_config_descriptor *config, /* utility wrapping a simple endpoint selection policy */ extern struct usb_ep *usb_ep_autoconfig (struct usb_gadget *, - struct usb_endpoint_descriptor *) __init; + struct usb_endpoint_descriptor *) __devinit; -extern void usb_ep_autoconfig_reset (struct usb_gadget *) __init; +extern void usb_ep_autoconfig_reset (struct usb_gadget *) __devinit; #endif /* __KERNEL__ */ diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index 608487a62c98..f38f43f20fae 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -43,6 +43,8 @@ /* Need delay after Command phase */ \ US_FLAG(NO_WP_DETECT, 0x00000200) \ /* Don't check for write-protect */ \ + US_FLAG(MAX_SECTORS_64, 0x00000400) \ + /* Sets max_sectors to 64 */ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; diff --git a/kernel/power/pm.c b/kernel/power/pm.c index 84063ac8fcfc..c50d15266c10 100644 --- a/kernel/power/pm.c +++ b/kernel/power/pm.c @@ -75,42 +75,6 @@ struct pm_dev *pm_register(pm_dev_t type, return dev; } -static void __pm_unregister(struct pm_dev *dev) -{ - if (dev) { - list_del(&dev->entry); - kfree(dev); - } -} - -/** - * pm_unregister_all - unregister all devices with matching callback - * @callback: callback function pointer - * - * Unregister every device that would call the callback passed. This - * is primarily meant as a helper function for loadable modules. It - * enables a module to give up all its managed devices without keeping - * its own private list. - */ - -void pm_unregister_all(pm_callback callback) -{ - struct list_head *entry; - - if (!callback) - return; - - mutex_lock(&pm_devs_lock); - entry = pm_devs.next; - while (entry != &pm_devs) { - struct pm_dev *dev = list_entry(entry, struct pm_dev, entry); - entry = entry->next; - if (dev->callback == callback) - __pm_unregister(dev); - } - mutex_unlock(&pm_devs_lock); -} - /** * pm_send - send request to a single device * @dev: device to send to @@ -239,7 +203,6 @@ int pm_send_all(pm_request_t rqst, void *data) } EXPORT_SYMBOL(pm_register); -EXPORT_SYMBOL(pm_unregister_all); EXPORT_SYMBOL(pm_send_all); EXPORT_SYMBOL(pm_active); diff --git a/kernel/resource.c b/kernel/resource.c index 129cf046e561..0dd3a857579e 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -404,8 +404,6 @@ int insert_resource(struct resource *parent, struct resource *new) return result; } -EXPORT_SYMBOL(insert_resource); - /* * Given an existing resource, change its start and size to match the * arguments. Returns -EBUSY if it can't fit. Existing children of |
