diff options
300 files changed, 2865 insertions, 3891 deletions
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index f5a5e6d3d541..563e442f2d42 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -4,8 +4,6 @@ - information on the 3Com EtherLink Plus (3c505) driver. 6pack.txt - info on the 6pack protocol, an alternative to KISS for AX.25 -Configurable - - info on some of the configurable network parameters DLINK.txt - info on the D-Link DE-600/DE-620 parallel port pocket adapters PLIP.txt @@ -26,8 +24,6 @@ baycom.txt - info on the driver for Baycom style amateur radio modems bridge.txt - where to get user space programs for ethernet bridging with Linux. -comx.txt - - info on drivers for COMX line of synchronous serial adapters. cops.txt - info on the COPS LocalTalk Linux driver cs89x0.txt @@ -78,20 +74,14 @@ ltpc.txt - the Apple or Farallon LocalTalk PC card driver multicast.txt - Behaviour of cards under Multicast -ncsa-telnet - - notes on how NCSA telnet (DOS) breaks with MTU discovery enabled. netdevices.txt - info on network device driver functions exported to the kernel. olympic.txt - IBM PCI Pit/Pit-Phy/Olympic Token Ring driver info. policy-routing.txt - IP policy-based routing -pt.txt - - the Gracilis Packetwin AX.25 device driver ray_cs.txt - Raylink Wireless LAN card driver info. -routing.txt - - the new routing mechanism shaper.txt - info on the module that can shape/limit transmitted traffic. sk98lin.txt diff --git a/Documentation/networking/Configurable b/Documentation/networking/Configurable deleted file mode 100644 index 69c0dd466ead..000000000000 --- a/Documentation/networking/Configurable +++ /dev/null @@ -1,34 +0,0 @@ - -There are a few network parameters that can be tuned to better match -the kernel to your system hardware and intended usage. The defaults -are usually a good choice for 99% of the people 99% of the time, but -you should be aware they do exist and can be changed. - -The current list of parameters can be found in the files: - - linux/net/TUNABLE - Documentation/networking/ip-sysctl.txt - -Some of these are accessible via the sysctl interface, and many more are -scheduled to be added in this way. For example, some parameters related -to Address Resolution Protocol (ARP) are very easily viewed and altered. - - # cat /proc/sys/net/ipv4/arp_timeout - 6000 - # echo 7000 > /proc/sys/net/ipv4/arp_timeout - # cat /proc/sys/net/ipv4/arp_timeout - 7000 - -Others are already accessible via the related user space programs. -For example, MAX_WINDOW has a default of 32 k which is a good choice for -modern hardware, but if you have a slow (8 bit) Ethernet card and/or a slow -machine, then this will be far too big for the card to keep up with fast -machines transmitting on the same net, resulting in overruns and receive errors. -A value of about 4 k would be more appropriate, which can be set via: - - # route add -net 192.168.3.0 window 4096 - -The remainder of these can only be presently changed by altering a #define -in the related header file. This means an edit and recompile cycle. - - Paul Gortmaker 06/96 diff --git a/Documentation/networking/comx.txt b/Documentation/networking/comx.txt deleted file mode 100644 index d1526eba2645..000000000000 --- a/Documentation/networking/comx.txt +++ /dev/null @@ -1,248 +0,0 @@ - - COMX drivers for the 2.2 kernel - -Originally written by: Tivadar Szemethy, <tiv@itc.hu> -Currently maintained by: Gergely Madarasz <gorgo@itc.hu> - -Last change: 21/06/1999. - -INTRODUCTION - -This document describes the software drivers and their use for the -COMX line of synchronous serial adapters for Linux version 2.2.0 and -above. -The cards are produced and sold by ITC-Pro Ltd. Budapest, Hungary -For further info contact <info@itc.hu> -or http://www.itc.hu (mostly in Hungarian). -The firmware files and software are available from ftp://ftp.itc.hu - -Currently, the drivers support the following cards and protocols: - -COMX (2x64 kbps intelligent board) -CMX (1x256 + 1x128 kbps intelligent board) -HiCOMX (2x2Mbps intelligent board) -LoCOMX (1x512 kbps passive board) -MixCOM (1x512 or 2x512kbps passive board with a hardware watchdog an - optional BRI interface and optional flashROM (1-32M)) -SliceCOM (1x2Mbps channelized E1 board) -PciCOM (X21) - -At the moment of writing this document, the (Cisco)-HDLC, LAPB, SyncPPP and -Frame Relay (DTE, rfc1294 IP encapsulation with partially implemented Q933a -LMI) protocols are available as link-level protocol. -X.25 support is being worked on. - -USAGE - -Load the comx.o module and the hardware-specific and protocol-specific -modules you'll need into the running kernel using the insmod utility. -This creates the /proc/comx directory. -See the example scripts in the 'etc' directory. - -/proc INTERFACE INTRO - -The COMX driver set has a new type of user interface based on the /proc -filesystem which eliminates the need for external user-land software doing -IOCTL calls. -Each network interface or device (i.e. those ones you configure with 'ifconfig' -and 'route' etc.) has a corresponding directory under /proc/comx. You can -dynamically create a new interface by saying 'mkdir /proc/comx/comx0' (or you -can name it whatever you want up to 8 characters long, comx[n] is just a -convention). -Generally the files contained in these directories are text files, which can -be viewed by 'cat filename' and you can write a string to such a file by -saying 'echo _string_ >filename'. This is very similar to the sysctl interface. -Don't use a text editor to edit these files, always use 'echo' (or 'cat' -where appropriate). -When you've created the comx[n] directory, two files are created automagically -in it: 'boardtype' and 'protocol'. You have to fill in these files correctly -for your board and protocol you intend to use (see the board and protocol -descriptions in this file below or the example scripts in the 'etc' directory). -After filling in these files, other files will appear in the directory for -setting the various hardware- and protocol-related informations (for example -irq and io addresses, keepalive values etc.) These files are set to default -values upon creation, so you don't necessarily have to change all of them. - -When you're ready with filling in the files in the comx[n] directory, you can -configure the corresponding network interface with the standard network -configuration utilities. If you're unable to bring the interfaces up, look up -the various kernel log files on your system, and consult the messages for -a probable reason. - -EXAMPLE - -To create the interface 'comx0' which is the first channel of a COMX card: - -insmod comx -# insmod comx-hw-comx ; insmod comx-proto-ppp (these are usually -autoloaded if you use the kernel module loader) - -mkdir /proc/comx/comx0 -echo comx >/proc/comx/comx0/boardtype -echo 0x360 >/proc/comx/comx0/io <- jumper-selectable I/O port -echo 0x0a >/proc/comx/comx0/irq <- jumper-selectable IRQ line -echo 0xd000 >/proc/comx/comx0/memaddr <- software-configurable memory - address. COMX uses 64 KB, and this - can be: 0xa000, 0xb000, 0xc000, - 0xd000, 0xe000. Avoid conflicts - with other hardware. -cat </etc/siol1.rom >/proc/comx/comx0/firmware <- the firmware for the card -echo HDLC >/proc/comx/comx0/protocol <- the data-link protocol -echo 10 >/proc/comx/comx0/keepalive <- the keepalive for the protocol -ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255 <- - finally configure it with ifconfig -Check its status: -cat /proc/comx/comx0/status - -If you want to use the second channel of this board: - -mkdir /proc/comx/comx1 -echo comx >/proc/comx/comx1/boardtype -echo 0x360 >/proc/comx/comx1/io -echo 10 >/proc/comx/comx1/irq -echo 0xd000 >/proc/comx/comx1/memaddr -echo 1 >/proc/comx/comx1/channel <- channels are numbered - as 0 (default) and 1 - -Now, check if the driver recognized that you're going to use the other -channel of the same adapter: - -cat /proc/comx/comx0/twin -comx1 -cat /proc/comx/comx1/twin -comx0 - -You don't have to load the firmware twice, if you use both channels of -an adapter, just write it into the channel 0's /proc firmware file. - -Default values: io 0x360 for COMX, 0x320 (HICOMX), irq 10, memaddr 0xd0000 - -THE LOCOMX HARDWARE DRIVER - -The LoCOMX driver doesn't require firmware, and it doesn't use memory either, -but it uses DMA channels 1 and 3. You can set the clock rate (if enabled by -jumpers on the board) by writing the kbps value into the file named 'clock'. -Set it to 'external' (it is the default) if you have external clock source. - -(Note: currently the LoCOMX driver does not support the internal clock) - -THE COMX, CMX AND HICOMX DRIVERS - -On the HICOMX, COMX and CMX, you have to load the firmware (it is different for -the three cards!). All these adapters can share the same memory -address (we usually use 0xd0000). On the CMX you can set the internal -clock rate (if enabled by jumpers on the small adapter boards) by writing -the kbps value into the 'clock' file. You have to do this before initializing -the card. If you use both HICOMX and CMX/COMX cards, initialize the HICOMX -first. The I/O address of the HICOMX board is not configurable by any -method available to the user: it is hardwired to 0x320, and if you have to -change it, consult ITC-Pro Ltd. - -THE MIXCOM DRIVER - -The MixCOM board doesn't require firmware, the driver communicates with -it through I/O ports. You can have three of these cards in one machine. - -THE SLICECOM DRIVER - -The SliceCOM board doesn't require firmware. You can have 4 of these cards -in one machine. The driver doesn't (yet) support shared interrupts, so -you will need a separate IRQ line for every board. -Read Documentation/networking/slicecom.txt for help on configuring -this adapter. - -THE HDLC/PPP LINE PROTOCOL DRIVER - -The HDLC/SyncPPP line protocol driver uses the kernel's built-in syncppp -driver (syncppp.o). You don't have to manually select syncppp.o when building -the kernel, the dependencies compile it in automatically. - - - - -EXAMPLE -(setting up hw parameters, see above) - -# using HDLC: -echo hdlc >/proc/comx/comx0/protocol -echo 10 >/proc/comx/comx0/keepalive <- not necessary, 10 is the default -ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255 - -(setting up hw parameters, see above) - -# using PPP: -echo ppp >/proc/comx/comx0/protocol -ifconfig comx0 up -ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255 - - -THE LAPB LINE PROTOCOL DRIVER - -For this, you'll need to configure LAPB support (See 'LAPB Data Link Driver' in -'Network options' section) into your kernel (thanks to Jonathan Naylor for his -excellent implementation). -comx-proto-lapb.o provides the following files in the appropriate directory -(the default values in parens): t1 (5), t2 (1), n2 (20), mode (DTE, STD) and -window (7). Agree with the administrator of your peer router on these -settings (most people use defaults, but you have to know if you are DTE or -DCE). - -EXAMPLE - -(setting up hw parameters, see above) -echo lapb >/proc/comx/comx0/protocol -echo dce >/proc/comx/comx0/mode <- DCE interface in this example -ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255 - - -THE FRAME RELAY PROTOCOL DRIVER - -You DON'T need any other frame relay related modules from the kernel to use -COMX-Frame Relay. This protocol is a bit more complicated than the others, -because it allows to use 'subinterfaces' or DLCIs within one physical device. -First you have to create the 'master' device (the actual physical interface) -as you would do for other protocols. Specify 'frad' as protocol type. -Now you can bring this interface up by saying 'ifconfig comx0 up' (or whatever -you've named the interface). Do not assign any IP address to this interface -and do not set any routes through it. -Then, set up your DLCIs the following way: create a comx interface for each -DLCI you intend to use (with mkdir), and write 'dlci' to the 'boardtype' file, -and 'ietf-ip' to the 'protocol' file. Currently, the only supported -encapsulation type is this (also called as RFC1294/1490 IP encapsulation). -Write the DLCI number to the 'dlci' file, and write the name of the physical -COMX device to the file called 'master'. -Now you can assign an IP address to this interface and set routes using it. -See the example file for further info and example config script. -Notes: this driver implements a DTE interface with partially implemented -Q933a LMI. -You can find an extensively commented example in the 'etc' directory. - -FURTHER /proc FILES - -boardtype: -Type of the hardware. Valid values are: - 'comx', 'hicomx', 'locomx', 'cmx', 'slicecom'. - -protocol: -Data-link protocol on this channel. Can be: HDLC, LAPB, PPP, FRAD - -status: -You can read the channel's actual status from the 'status' file, for example -'cat /proc/comx/comx3/status'. - -lineup_delay: -Interpreted in seconds (default is 1). Used to avoid line jitter: the system -will consider the line status 'UP' only if it is up for at least this number -of seconds. - -debug: -You can set various debug options through this file. Valid options are: -'comx_events', 'comx_tx', 'comx_rx', 'hw_events', 'hw_tx', 'hw_rx'. -You can enable a debug options by writing its name prepended by a '+' into -the debug file, for example 'echo +comx_rx >comx0/debug'. -Disabling an option happens similarly, use the '-' prefix -(e.g. 'echo -hw_rx >debug'). -Debug results can be read from the debug file, for example: -tail -f /proc/comx/comx2/debug - - diff --git a/Documentation/networking/ncsa-telnet b/Documentation/networking/ncsa-telnet deleted file mode 100644 index d77d28b09093..000000000000 --- a/Documentation/networking/ncsa-telnet +++ /dev/null @@ -1,16 +0,0 @@ -NCSA telnet doesn't work with path MTU discovery enabled. This is due to a -bug in NCSA that also stops it working with other modern networking code -such as Solaris. - -The following information is courtesy of -Marek <marekm@i17linuxb.ists.pwr.wroc.pl> - -There is a fixed version somewhere on ftp.upe.ac.za (sorry, I don't -remember the exact pathname, and this site is very slow from here). -It may or may not be faster for you to get it from -ftp://ftp.ists.pwr.wroc.pl/pub/msdos/telnet/ncsa_upe/tel23074.zip -(source is in v230704s.zip). I have tested it with 1.3.79 (with -path mtu discovery enabled - ncsa 2.3.08 didn't work) and it seems -to work. I don't know if anyone is working on this code - this -version is over a year old. Too bad - it's faster and often more -stable than these windoze telnets, and runs on almost anything... diff --git a/Documentation/networking/pt.txt b/Documentation/networking/pt.txt deleted file mode 100644 index 72e888c1d988..000000000000 --- a/Documentation/networking/pt.txt +++ /dev/null @@ -1,58 +0,0 @@ -This is the README for the Gracilis Packetwin device driver, version 0.5 -ALPHA for Linux 1.3.43. - -These files will allow you to talk to the PackeTwin (now know as PT) and -connect through it just like a pair of TNCs. To do this you will also -require the AX.25 code in the kernel enabled. - -There are four files in this archive; this readme, a patch file, a .c file -and finally a .h file. The two program files need to be put into the -drivers/net directory in the Linux source tree, for me this is the -directory /usr/src/linux/drivers/net. The patch file needs to be patched in -at the top of the Linux source tree (/usr/src/linux in my case). - -You will most probably have to edit the pt.c file to suit your own setup, -this should just involve changing some of the defines at the top of the file. -Please note that if you run an external modem you must specify a speed of 0. - -The program is currently setup to run a 4800 baud external modem on port A -and a Kantronics DE-9600 daughter board on port B so if you have this (or -something similar) then you're right. - -To compile in the driver, put the files in the correct place and patch in -the diff. You will have to re-configure the kernel again before you -recompile it. - -The driver is not real good at the moment for finding the card. You can -'help' it by changing the order of the potential addresses in the structure -found in the pt_init() function so the address of where the card is is put -first. - -After compiling, you have to get them going, they are pretty well like any -other net device and just need ifconfig to get them going. -As an example, here is my /etc/rc.net --------------------------- - -# -# Configure the PackeTwin, port A. -/sbin/ifconfig pt0a 44.136.8.87 hw ax25 vk2xlz mtu 512 -/sbin/ifconfig pt0a 44.136.8.87 broadcast 44.136.8.255 netmask 255.255.255.0 -/sbin/route add -net 44.136.8.0 netmask 255.255.255.0 dev pt0a -/sbin/route add -net 44.0.0.0 netmask 255.0.0.0 gw 44.136.8.68 dev pt0a -/sbin/route add -net 138.25.16.0 netmask 255.255.240.0 dev pt0a -/sbin/route add -host 44.136.8.255 dev pt0a -# -# Configure the PackeTwin, port B. -/sbin/ifconfig pt0b 44.136.8.87 hw ax25 vk2xlz-1 mtu 512 -/sbin/ifconfig pt0b 44.136.8.87 broadcast 44.255.255.255 netmask 255.0.0.0 -/sbin/route add -host 44.136.8.216 dev pt0b -/sbin/route add -host 44.136.8.95 dev pt0b -/sbin/route add -host 44.255.255.255 dev pt0b - -This version of the driver comes under the GNU GPL. If you have one of my -previous (non-GPL) versions of the driver, please update to this one. - -I hope that this all works well for you. I would be pleased to hear how -many people use the driver and if it does its job. - - - Craig vk2xlz <csmall@small.dropbear.id.au> diff --git a/Documentation/networking/routing.txt b/Documentation/networking/routing.txt deleted file mode 100644 index a26838b930f2..000000000000 --- a/Documentation/networking/routing.txt +++ /dev/null @@ -1,46 +0,0 @@ -The directory ftp.inr.ac.ru:/ip-routing contains: - -- iproute.c - "professional" routing table maintenance utility. - -- rdisc.tar.gz - rdisc daemon, ported from Sun. - STRONGLY RECOMMENDED FOR ALL HOSTS. - -- routing.tgz - original Mike McLagan's route by source patch. - Currently it is obsolete. - -- gated.dif-ss<NEWEST>.gz - gated-R3_6Alpha_2 fixes. - Look at README.gated - -- mrouted-3.8.dif.gz - mrouted-3.8 fixes. - -- rtmon.c - trivial debugging utility: reads and stores netlink. - - -NEWS for user. - -- Policy based routing. Routing decisions are made on the basis - not only of destination address, but also source address, - TOS and incoming interface. -- Complete set of IP level control messages. - Now Linux is the only OS in the world complying to RFC requirements. - Great win 8) -- New interface addressing paradigm. - Assignment of address ranges to interface, - multiple prefixes etc. etc. - Do not bother, it is compatible with the old one. Moreover: -- You don't need to do "route add aaa.bbb.ccc... eth0" anymore, - it is done automatically. -- "Abstract" UNIX sockets and security enhancements. - This is necessary to use TIRPC and TLI emulation library. - -NEWS for hacker. - -- New destination cache. Flexible, robust and just beautiful. -- Network stack is reordered, simplified, optimized, a lot of bugs fixed. - (well, and new bugs were introduced, but I haven't seen them yet 8)) - It is difficult to describe all the changes, look into source. - -If you see this file, then this patch works 8) - -Alexey Kuznetsov. -kuznet@ms2.inr.ac.ru diff --git a/Documentation/networking/slicecom.hun b/Documentation/networking/slicecom.hun deleted file mode 100644 index bed2f045e550..000000000000 --- a/Documentation/networking/slicecom.hun +++ /dev/null @@ -1,371 +0,0 @@ - -SliceCOM adapter felhasznaloi dokumentacioja - 0.51 verziohoz - -Bartók István <bartoki@itc.hu> -Utolso modositas: Wed Aug 29 17:26:58 CEST 2001 - ------------------------------------------------------------------ - -Hasznalata: - -Forditas: - -Code maturity level options - [*] Prompt for development and/or incomplete code/drivers - -Network device support - Wan interfaces - <M> MultiGate (COMX) synchronous - <M> Support for MUNICH based boards: SliceCOM, PCICOM (NEW) - <M> Support for HDLC and syncPPP... - - -A modulok betoltese: - -modprobe comx - -modprobe comx-proto-ppp # a Cisco-HDLC es a SyncPPP protokollt is - # ez a modul adja - -modprobe comx-hw-munich # a modul betoltodeskor azonnal jelent a - # syslogba a detektalt kartyakrol - - -Konfiguralas: - -# Ezen az interfeszen Cisco-HDLC vonali protokoll fog futni -# Az interfeszhez rendelt idoszeletek: 1,2 (128 kbit/sec-es vonal) -# (a G.703 keretben az elso adatot vivo idoszelet az 1-es) -# -mkdir /proc/comx/comx0.1/ -echo slicecom >/proc/comx/comx0.1/boardtype -echo hdlc >/proc/comx/comx0.1/protocol -echo 1 2 >/proc/comx/comx0.1/timeslots - - -# Ezen az interfeszen SyncPPP vonali protokoll fog futni -# Az interfeszhez rendelt idoszelet: 3 (64 kbit/sec-es vonal) -# -mkdir /proc/comx/comx0.2/ -echo slicecom >/proc/comx/comx0.2/boardtype -echo ppp >/proc/comx/comx0.2/protocol -echo 3 >/proc/comx/comx0.2/timeslots - -... - -ifconfig comx0.1 up -ifconfig comx0.2 up - ------------------------------------------------------------------ - -A COMX driverek default 20 csomagnyi transmit queue-t rendelnek a halozati -interfeszekhez. WAN halozatokban ennel hosszabbat is szokas hasznalni -(20 es 100 kozott), hogy a vonal kihasznaltsaga nagy terheles eseten jobb -legyen (bar ezzel megno a varhato kesleltetes a csomagok sorban allasa miatt): - -# ifconfig comx0 txqueuelen 50 - -Ezt a beallitasi lehetoseget csak az ujabb disztribuciok ifconfig parancsa -tamogatja (amik mar a 2.2 kernelekhez keszultek, mint a RedHat 6.1 vagy a -Debian 2.2). - -A 2.1-es Debian disztribuciohoz a http://www.debian.org/~rcw/2.2/netbase/ -cimrol toltheto le ujabb netbase csomag, ami mar ilyet tamogato ifconfig -parancsot tartalmaz. Bovebben a 2.2 kernel hasznalatarol Debian 2.1 alatt: -http://www.debian.org/releases/stable/running-kernel-2.2 - ------------------------------------------------------------------ - -A kartya LED-jeinek jelentese: - -piros - eg, ha Remote Alarm-ot kuld a tuloldal -zold - eg, ha a vett jelben megtalalja a keretszinkront - -Reszletesebben: - -piros: zold: jelentes: - -- - nincs keretszinkron (nincs jel, vagy rossz a jel) -- eg "minden rendben" -eg eg a vetel OK, de a tuloldal Remote Alarm-ot kuld -eg - ez nincs ertelmezve, egyelore funkcio nelkul - ------------------------------------------------------------------ - -Reszletesebb leiras a hardver beallitasi lehetosegeirol: - -Az altalanos,- es a protokoll-retegek beallitasi lehetosegeirol a 'comx.txt' -fajlban leirtak SliceCOM kartyanal is ervenyesek, itt csak a hardver-specifikus -beallitasi lehetosegek vannak osszefoglalva: - -Konfiguralasi interfesz a /proc/comx/ alatt: - -Minden timeslot-csoportnak kulon comx* interfeszt kell letrehozni mkdir-rel: -comx0, comx1, .. stb. Itt beallithato, hogy az adott interfesz hanyadik kartya -melyik timeslotja(i)bol alljon ossze. A Cisco-fele serial3:1 elnevezesek -(serial3:1 = a 3. kartyaban az 1-es idoszelet-csoport) Linuxon aliasing-ot -jelentenenek, ezert mi nem tudunk ilyen elnevezest hasznalni. - -Tobb kartya eseten a comx0.1, comx0.2, ... vagy slice0.1, slice0.2 nevek -hasznalhatoak. - -Tobb SliceCOM kartya is lehet egy gepben, de sajat interrupt kell mindegyiknek, -nem tud meg megosztott interruptot kezelni. - -Az egesz kartyat erinto beallitasok: - -Az ioport es irq beallitas nincs: amit a PCI BIOS kioszt a rendszernek, -azt hasznalja a driver. - - -comx0/boardnum - hanyadik SliceCOM kartya a gepben (a 'termeszetes' PCI - sorrendben ertve: ahogyan a /proc/pci-ban vagy az 'lspci' - kimeneteben megjelenik, altalaban az alaplapi PCI meghajto - aramkorokhoz kozelebb eso kartyak a kisebb sorszamuak) - - Default: 0 (0-tol kezdodik a szamolas) - - -Bar a kovetkezoket csak egy-egy interfeszen allitjuk at, megis az egesz kartya -mukodeset egyszerre allitjak. A megkotes hogy csak UP-ban levo interfeszen -hasznalhatoak, azert van, mert kulonben nem vart eredmenyekre vezetne egy ilyen -paranccsorozat: - - echo 0 >boardnum - echo internal >clock_source - echo 1 >boardnum - -- Ez a 0-s board clock_source-at allitana at. - -Ezek a beallitasok megmaradnak az osszes interfesz torlesekor, de torlodnek -a driver modul ki/betoltesekor. - - -comx0/clock_source - A Tx orajelforrasa, a Cisco-val hasonlatosra keszult. - Hasznalata: - - papaya:# echo line >/proc/comx/comx0/clock_source - papaya:# echo internal >/proc/comx/comx0/clock_source - - line - A Tx orajelet a vett adatfolyambol dekodolja, igyekszik - igazodni hozza. Ha nem lat orajelet az inputon, akkor - atall a sajat orajelgeneratorara. - internal - A Tx orajelet a sajat orajelgeneratora szolgaltatja. - - Default: line - - Normal osszeallitas eseten a tavkozlesi szolgaltato eszkoze - (pl. HDSL modem) adja az orajelet, ezert ez a default. - - -comx0/framing - A CRC4 ki/be kapcsolasa - - A CRC4: 16 PCM keretet (A PCM keret az, amibe a 32 darab 64 - kilobites csatorna van bemultiplexalva. Nem osszetevesztendo a HDLC - kerettel.) 2x8 -as csoportokra osztanak, es azokhoz 4-4 bites CRC-t - szamolnak. Elsosorban a vonal minosegenek a monitorozasara szolgal. - - papaya:~# echo crc4 >/proc/comx/comx0/framing - papaya:~# echo no-crc4 >/proc/comx/comx0/framing - - Default a 'crc4', a MATAV vonalak altalaban igy futnak. De ha nem - egyforma is a beallitas a vonal ket vegen, attol a forgalom altalaban - at tud menni. - - -comx0/linecode - A vonali kodolas beallitasa - - papaya:~# echo hdb3 >/proc/comx/comx0/linecode - papaya:~# echo ami >/proc/comx/comx0/linecode - - Default a 'hdb3', a MATAV vonalak igy futnak. - - (az AMI kodolas igen ritka E1-es vonalaknal). Ha ez a beallitas nem - egyezik a vonal ket vegen, akkor elofordulhat hogy a keretszinkron - osszejon, de CRC4-hibak es a vonalakon atvitt adatokban is hibak - keletkeznek (amit a HDLC/SyncPPP szinten CRC-hibaval jelez) - - -comx0/reg - a kartya aramkoreinek, a MUNICH (reg) es a FALC (lbireg) -comx0/lbireg regisztereinek kozvetlen elerese. Hasznalata: - - echo >reg 0x04 0x0 - a 4-es regiszterbe 0-t ir - echo >reg 0x104 - printk()-val kiirja a 4-es regiszter - tartalmat a syslogba. - - WARNING: ezek csak a fejleszteshez keszultek, sok galibat - lehet veluk okozni! - - -comx0/loopback - A kartya G.703 jelenek a visszahurkolasara is van lehetoseg: - - papaya:# echo none >/proc/comx/comx0/loopback - papaya:# echo local >/proc/comx/comx0/loopback - papaya:# echo remote >/proc/comx/comx0/loopback - - none - nincs visszahurkolas, normal mukodes - local - a kartya a sajat maga altal adott jelet kapja vissza - remote - a kartya a kivulrol vett jelet adja kifele - - Default: none - ------------------------------------------------------------------ - -Az interfeszhez (Cisco terminologiaban 'channel-group') kapcsolodo beallitasok: - -comx0/timeslots - mely timeslotok (idoszeletek) tartoznak az adott interfeszhez. - - papaya:~# cat /proc/comx/comx0/timeslots - 1 3 4 5 6 - papaya:~# - - Egy timeslot megkeresese (hanyas interfeszbe tartozik nalunk): - - papaya:~# grep ' 4' /proc/comx/comx*/timeslots - /proc/comx/comx0/timeslots:1 3 4 5 6 - papaya:~# - - Beallitasa: - papaya:~# echo '1 5 2 6 7 8' >/proc/comx/comx0/timeslots - - A timeslotok sorrendje nem szamit, '1 3 2' ugyanaz mint az '1 2 3'. - - Beallitashoz az adott interfesznek DOWN-ban kell lennie - (ifconfig comx0 down), de ugyanannak a kartyanak a tobbi interfesze - uzemelhet kozben. - - Beallitaskor leellenorzi, hogy az uj timeslotok nem utkoznek-e egy - masik interfesz timeslotjaival. Ha utkoznek, akkor nem allitja at. - - Mindig 10-es szamrendszerben tortenik a timeslotok ertelmezese, nehogy - a 08, 09 alaku felirast rosszul ertelmezze. - ------------------------------------------------------------------ - -Az interfeszek es a kartya allapotanak lekerdezese: - -- A ' '-szel kezdodo sorok az eredeti kimenetet, a //-rel kezdodo sorok a -magyarazatot jelzik. - - papaya:~$ cat /proc/comx/comx1/status - Interface administrative status is UP, modem status is UP, protocol is UP - Modem status changes: 0, Transmitter status is IDLE, tbusy: 0 - Interface load (input): 978376 / 947808 / 951024 bits/s (5s/5m/15m) - (output): 978376 / 947848 / 951024 bits/s (5s/5m/15m) - Debug flags: none - RX errors: len: 22, overrun: 1, crc: 0, aborts: 0 - buffer overrun: 0, pbuffer overrun: 0 - TX errors: underrun: 0 - Line keepalive (value: 10) status UP [0] - -// Itt kezdodik a hardver-specifikus resz: - Controller status: - No alarms - -// Alarm: hibajelzes: -// -// No alarms - minden rendben -// -// LOS - Loss Of Signal - nem erzekel jelet a bemeneten. -// AIS - Alarm Indication Signal - csak egymas utani 1-esek jonnek -// a bemeneten, a tuloldal igy is jelezheti hogy meghibasodott vagy -// nincs inicializalva. -// AUXP - Auxiliary Pattern Indication - 01010101.. sorozat jon a bemeneten. -// LFA - Loss of Frame Alignment - nincs keretszinkron -// RRA - Receive Remote Alarm - a tuloldal el, de hibat jelez. -// LMFA - Loss of CRC4 Multiframe Alignment - nincs CRC4-multikeret-szinkron -// NMF - No Multiframe alignment Found after 400 msec - ilyen alarm a no-crc4 -// es crc4 keretezesek eseten nincs, lasd lentebb -// -// Egyeb lehetseges hibajelzesek: -// -// Transmit Line Short - a kartya ugy erzi hogy az adasi kimenete rovidre -// van zarva, ezert kikapcsolta az adast. (nem feltetlenul veszi eszre -// a kulso rovidzarat) - -// A veteli oldal csomagjainak lancolt listai, debug celokra: - - Rx ring: - rafutott: 0 - lastcheck: 50845731, jiffies: 51314281 - base: 017b1858 - rx_desc_ptr: 0 - rx_desc_ptr: 017b1858 - hw_curr_ptr: 017b1858 - 06040000 017b1868 017b1898 c016ff00 - 06040000 017b1878 017b1e9c c016ff00 - 46040000 017b1888 017b24a0 c016ff00 - 06040000 017b1858 017b2aa4 c016ff00 - -// A kartyat hasznalo tobbi interfesz: a 0-s channel-group a comx1 interfesz, -// es az 1,2,...,16 timeslotok tartoznak hozza: - - Interfaces using this board: (channel-group, interface, timeslots) - 0 comx1: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - 1 comx2: 17 - 2 comx3: 18 - 3 comx4: 19 - 4 comx5: 20 - 5 comx6: 21 - 6 comx7: 22 - 7 comx8: 23 - 8 comx9: 24 - 9 comx10: 25 - 10 comx11: 26 - 11 comx12: 27 - 12 comx13: 28 - 13 comx14: 29 - 14 comx15: 30 - 15 comx16: 31 - -// Hany esemenyt kezelt le a driver egy-egy hardver-interrupt kiszolgalasanal: - - Interrupt work histogram: - hist[ 0]: 0 hist[ 1]: 2 hist[ 2]: 18574 hist[ 3]: 79 - hist[ 4]: 14 hist[ 5]: 1 hist[ 6]: 0 hist[ 7]: 1 - hist[ 8]: 0 hist[ 9]: 7 - -// Hany kikuldendo csomag volt mar a Tx-ringben amikor ujabb lett irva bele: - - Tx ring histogram: - hist[ 0]: 2329 hist[ 1]: 0 hist[ 2]: 0 hist[ 3]: 0 - -// Az E1-interfesz hiba-szamlaloi, az rfc2495-nek megfeleloen: -// (kb. a Cisco routerek "show controllers e1" formatumaban: http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/rbook/rinterfc.htm#xtocid25669126) - -Data in current interval (91 seconds elapsed): - 9516 Line Code Violations, 65 Path Code Violations, 2 E-Bit Errors - 0 Slip Secs, 2 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 11 Unavail Secs -Data in Interval 1 (15 minutes): - 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors - 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs -Data in last 4 intervals (1 hour): - 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors - 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs -Data in last 96 intervals (24 hours): - 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors - 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs - ------------------------------------------------------------------ - -Nehany kulonlegesebb beallitasi lehetoseg (idovel beepulhetnek majd a driverbe): -Ezekkel sok galibat lehet okozni, nagyon ovatosan kell oket hasznalni! - - modified CRC-4, for improved interworking of CRC-4 and non-CRC-4 - devices: (lasd page 107 es g706 Annex B) - lbireg[ 0x1b ] |= 0x08 - lbireg[ 0x1c ] |= 0xc0 - - ilyenkor ertelmezett az NMF - 'No Multiframe alignment Found after - 400 msec' alarm. - - FALC - a vonali meghajto IC - local loop - a sajat adasomat halljam vissza - remote loop - a kivulrol jovo adast adom vissza - - Egy hibakeresesre hasznalhato dolog: - - 1-es timeslot local loop a FALC-ban: echo >lbireg 0x1d 0x21 - - local loop kikapcsolasa: echo >lbireg 0x1d 0x00 diff --git a/Documentation/networking/slicecom.txt b/Documentation/networking/slicecom.txt deleted file mode 100644 index c82c0cf981b4..000000000000 --- a/Documentation/networking/slicecom.txt +++ /dev/null @@ -1,369 +0,0 @@ - -SliceCOM adapter user's documentation - for the 0.51 driver version - -Written by Bartók István <bartoki@itc.hu> - -English translation: Lakatos György <gyuri@itc.hu> -Mon Dec 11 15:28:42 CET 2000 - -Last modified: Wed Aug 29 17:25:37 CEST 2001 - ------------------------------------------------------------------ - -Usage: - -Compiling the kernel: - -Code maturity level options - [*] Prompt for development and/or incomplete code/drivers - -Network device support - Wan interfaces - <M> MultiGate (COMX) synchronous - <M> Support for MUNICH based boards: SliceCOM, PCICOM (NEW) - <M> Support for HDLC and syncPPP... - - -Loading the modules: - -modprobe comx - -modprobe comx-proto-ppp # module for Cisco-HDLC and SyncPPP protocols - -modprobe comx-hw-munich # the module logs information by the kernel - # about the detected boards - - -Configuring the board: - -# This interface will use the Cisco-HDLC line protocol, -# the timeslices assigned are 1,2 (128 KiBit line speed) -# (the first data timeslice in the G.703 frame is no. 1) -# -mkdir /proc/comx/comx0.1/ -echo slicecom >/proc/comx/comx0.1/boardtype -echo hdlc >/proc/comx/comx0.1/protocol -echo 1 2 >/proc/comx/comx0.1/timeslots - - -# This interface uses SyncPPP line protocol, the assigned -# is no. 3 (64 KiBit line speed) -# -mkdir /proc/comx/comx0.2/ -echo slicecom >/proc/comx/comx0.2/boardtype -echo ppp >/proc/comx/comx0.2/protocol -echo 3 >/proc/comx/comx0.2/timeslots - -... - -ifconfig comx0.1 up -ifconfig comx0.2 up - ------------------------------------------------------------------ - -The COMX interfaces use a 10 packet transmit queue by default, however WAN -networks sometimes use bigger values (20 to 100), to utilize the line better -by large traffic (though the line delay increases because of more packets -join the queue). - -# ifconfig comx0 txqueuelen 50 - -This option is only supported by the ifconfig command of the later -distributions, which came with 2.2 kernels, such as RedHat 6.1 or Debian 2.2. - -You can download a newer netbase packet from -http://www.debian.org/~rcw/2.2/netbase/ for Debian 2.1, which has a new -ifconfig. You can get further information about using 2.2 kernel with -Debian 2.1 from http://www.debian.org/releases/stable/running-kernel-2.2 - ------------------------------------------------------------------ - -The SliceCom LEDs: - -red - on, if the interface is unconfigured, or it gets Remote Alarm-s -green - on, if the board finds frame-sync in the received signal - -A bit more detailed: - -red: green: meaning: - -- - no frame-sync, no signal received, or signal SNAFU. -- on "Everything is OK" -on on Reception is ok, but the remote end sends Remote Alarm -on - The interface is unconfigured - ------------------------------------------------------------------ - -A more detailed description of the hardware setting options: - -The general and the protocol layer options described in the 'comx.txt' file -apply to the SliceCom as well, I only summarize the SliceCom hardware specific -settings below. - -The '/proc/comx' configuring interface: - -An interface directory should be created for every timeslot group with -'mkdir', e,g: 'comx0', 'comx1' etc. The timeslots can be assigned here to the -specific interface. The Cisco-like naming convention (serial3:1 - first -timeslot group of the 3rd. board) can't be used here, because these mean IP -aliasing in Linux. - -You can give any meaningful name to keep the configuration clear; -e.g: 'comx0.1', 'comx0.2', 'comx1.1', comx1.2', if you have two boards -with two interfaces each. - -Settings, which apply to the board: - -Neither 'io' nor 'irq' settings required, the driver uses the resources -given by the PCI BIOS. - -comx0/boardnum - board number of the SliceCom in the PC (using the 'natural' - PCI order) as listed in '/proc/pci' or the output of the - 'lspci' command, generally the slots nearer to the motherboard - PCI driver chips have the lower numbers. - - Default: 0 (the counting starts with 0) - -Though the options below are to be set on a single interface, they apply to the -whole board. The restriction, to use them on 'UP' interfaces, is because the -command sequence below could lead to unpredictable results. - - # echo 0 >boardnum - # echo internal >clock_source - # echo 1 >boardnum - -The sequence would set the clock source of board 0. - -These settings will persist after all the interfaces are cleared, but are -cleared when the driver module is unloaded and loaded again. - -comx0/clock_source - source of the transmit clock - Usage: - - # echo line >/proc/comx/comx0/clock_source - # echo internal >/proc/comx/comx0/clock_source - - line - The Tx clock is being decoded if the input data stream, - if no clock seen on the input, then the board will use it's - own clock generator. - - internal - The Tx clock is supplied by the builtin clock generator. - - Default: line - - Normally, the telecommunication company's end device (the HDSL - modem) provides the Tx clock, that's why 'line' is the default. - -comx0/framing - Switching CRC4 off/on - - CRC4: 16 PCM frames (The 32 64Kibit channels are multiplexed into a - PCM frame, nothing to do with HDLC frames) are divided into 2x8 - groups, each group has a 4 bit CRC. - - # echo crc4 >/proc/comx/comx0/framing - # echo no-crc4 >/proc/comx/comx0/framing - - Default is 'crc4', the Hungarian MATAV lines behave like this. - The traffic generally passes if this setting on both ends don't match. - -comx0/linecode - Setting the line coding - - # echo hdb3 >/proc/comx/comx0/linecode - # echo ami >/proc/comx/comx0/linecode - - Default a 'hdb3', MATAV lines use this. - - (AMI coding is rarely used with E1 lines). Frame sync may occur, if - this setting doesn't match the other end's, but CRC4 and data errors - will come, which will result in CRC errors on HDLC/SyncPPP level. - -comx0/reg - direct access to the board's MUNICH (reg) and FALC (lbireg) -comx0/lbireg circuit's registers - - # echo >reg 0x04 0x0 - write 0 to register 4 - # echo >reg 0x104 - write the contents of register 4 with - printk() to syslog - -WARNING! These are only for development purposes, messing with this will - result much trouble! - -comx0/loopback - Places a loop to the board's G.703 signals - - # echo none >/proc/comx/comx0/loopback - # echo local >/proc/comx/comx0/loopback - # echo remote >/proc/comx/comx0/loopback - - none - normal operation, no loop - local - the board receives it's own output - remote - the board sends the received data to the remote side - - Default: none - ------------------------------------------------------------------ - -Interface (channel group in Cisco terms) settings: - -comx0/timeslots - which timeslots belong to the given interface - - Setting: - - # echo '1 5 2 6 7 8' >/proc/comx/comx0/timeslots - - # cat /proc/comx/comx0/timeslots - 1 2 5 6 7 8 - # - - Finding a timeslot: - - # grep ' 4' /proc/comx/comx*/timeslots - /proc/comx/comx0/timeslots:1 3 4 5 6 - # - - The timeslots can be in any order, '1 2 3' is the same as '1 3 2'. - - The interface has to be DOWN during the setting ('ifconfig comx0 - down'), but the other interfaces could operate normally. - - The driver checks if the assigned timeslots are vacant, if not, then - the setting won't be applied. - - The timeslot values are treated as decimal numbers, not to misunderstand - values of 08, 09 form. - ------------------------------------------------------------------ - -Checking the interface and board status: - -- Lines beginning with ' ' (space) belong to the original output, the lines -which begin with '//' are the comments. - - papaya:~$ cat /proc/comx/comx1/status - Interface administrative status is UP, modem status is UP, protocol is UP - Modem status changes: 0, Transmitter status is IDLE, tbusy: 0 - Interface load (input): 978376 / 947808 / 951024 bits/s (5s/5m/15m) - (output): 978376 / 947848 / 951024 bits/s (5s/5m/15m) - Debug flags: none - RX errors: len: 22, overrun: 1, crc: 0, aborts: 0 - buffer overrun: 0, pbuffer overrun: 0 - TX errors: underrun: 0 - Line keepalive (value: 10) status UP [0] - -// The hardware specific part starts here: - Controller status: - No alarms - -// Alarm: -// -// No alarms - Everything OK -// -// LOS - Loss Of Signal - No signal sensed on the input -// AIS - Alarm Indication Signal - The remote side sends '11111111'-s, -// it tells, that there's an error condition, or it's not -// initialised. -// AUXP - Auxiliary Pattern Indication - 01010101.. received. -// LFA - Loss of Frame Alignment - no frame sync received. -// RRA - Receive Remote Alarm - the remote end's OK, but signals error cond. -// LMFA - Loss of CRC4 Multiframe Alignment - no CRC4 multiframe sync. -// NMF - No Multiframe alignment Found after 400 msec - no such alarm using -// no-crc4 or crc4 framing, see below. -// -// Other possible error messages: -// -// Transmit Line Short - the board felt, that it's output is short-circuited, -// so it switched the transmission off. (The board can't definitely tell, -// that it's output is short-circuited.) - -// Chained list of the received packets, for debug purposes: - - Rx ring: - rafutott: 0 - lastcheck: 50845731, jiffies: 51314281 - base: 017b1858 - rx_desc_ptr: 0 - rx_desc_ptr: 017b1858 - hw_curr_ptr: 017b1858 - 06040000 017b1868 017b1898 c016ff00 - 06040000 017b1878 017b1e9c c016ff00 - 46040000 017b1888 017b24a0 c016ff00 - 06040000 017b1858 017b2aa4 c016ff00 - -// All the interfaces using the board: comx1, using the 1,2,...16 timeslots, -// comx2, using timeslot 17, etc. - - Interfaces using this board: (channel-group, interface, timeslots) - 0 comx1: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - 1 comx2: 17 - 2 comx3: 18 - 3 comx4: 19 - 4 comx5: 20 - 5 comx6: 21 - 6 comx7: 22 - 7 comx8: 23 - 8 comx9: 24 - 9 comx10: 25 - 10 comx11: 26 - 11 comx12: 27 - 12 comx13: 28 - 13 comx14: 29 - 14 comx15: 30 - 15 comx16: 31 - -// The number of events handled by the driver during an interrupt cycle: - - Interrupt work histogram: - hist[ 0]: 0 hist[ 1]: 2 hist[ 2]: 18574 hist[ 3]: 79 - hist[ 4]: 14 hist[ 5]: 1 hist[ 6]: 0 hist[ 7]: 1 - hist[ 8]: 0 hist[ 9]: 7 - -// The number of packets to send in the Tx ring, when a new one arrived: - - Tx ring histogram: - hist[ 0]: 2329 hist[ 1]: 0 hist[ 2]: 0 hist[ 3]: 0 - -// The error counters of the E1 interface, according to the RFC2495, -// (similar to the Cisco "show controllers e1" command's output: -// http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/rbook/rinterfc.htm#xtocid25669126) - -Data in current interval (91 seconds elapsed): - 9516 Line Code Violations, 65 Path Code Violations, 2 E-Bit Errors - 0 Slip Secs, 2 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 11 Unavail Secs -Data in Interval 1 (15 minutes): - 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors - 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs -Data in last 4 intervals (1 hour): - 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors - 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs -Data in last 96 intervals (24 hours): - 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors - 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins - 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs - ------------------------------------------------------------------ - -Some unique options, (may get into the driver later): -Treat them very carefully, these can cause much trouble! - - modified CRC-4, for improved interworking of CRC-4 and non-CRC-4 - devices: (see page 107 and g706 Annex B) - lbireg[ 0x1b ] |= 0x08 - lbireg[ 0x1c ] |= 0xc0 - - - The NMF - 'No Multiframe alignment Found after 400 msec' alarm - comes into account. - - FALC - the line driver chip. - local loop - I hear my transmission back. - remote loop - I echo the remote transmission back. - - Something useful for finding errors: - - - local loop for timeslot 1 in the FALC chip: - - # echo >lbireg 0x1d 0x21 - - - Switching the loop off: - - # echo >lbireg 0x1d 0x00 diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index a96e85397eb7..ac1be25c1e25 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -52,6 +52,7 @@ Table of Contents i) Freescale QUICC Engine module (QE) j) CFI or JEDEC memory-mapped NOR flash k) Global Utilities Block + l) Xilinx IP cores VII - Specifying interrupt information for devices 1) interrupts property @@ -851,12 +852,18 @@ address which can extend beyond that limit. /cpus/PowerPC,970FX@0 /cpus/PowerPC,970FX@1 (unit addresses do not require leading zeroes) - - d-cache-line-size : one cell, L1 data cache line size in bytes - - i-cache-line-size : one cell, L1 instruction cache line size in + - d-cache-block-size : one cell, L1 data cache block size in bytes (*) + - i-cache-block-size : one cell, L1 instruction cache block size in bytes - d-cache-size : one cell, size of L1 data cache in bytes - i-cache-size : one cell, size of L1 instruction cache in bytes +(*) The cache "block" size is the size on which the cache management +instructions operate. Historically, this document used the cache +"line" size here which is incorrect. The kernel will prefer the cache +block size and will fallback to cache line size for backward +compatibility. + Recommended properties: - timebase-frequency : a cell indicating the frequency of the @@ -870,6 +877,10 @@ address which can extend beyond that limit. for the above, the common code doesn't use that property, but you are welcome to re-use the pSeries or Maple one. A future kernel version might provide a common function for this. + - d-cache-line-size : one cell, L1 data cache line size in bytes + if different from the block size + - i-cache-line-size : one cell, L1 instruction cache line size in + bytes if different from the block size You are welcome to add any property you find relevant to your board, like some information about the mechanism used to soft-reset the @@ -2242,6 +2253,266 @@ platforms are moved over to use the flattened-device-tree model. available. For Axon: 0x0000012a + l) Xilinx IP cores + + The Xilinx EDK toolchain ships with a set of IP cores (devices) for use + in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range + of standard device types (network, serial, etc.) and miscellanious + devices (gpio, LCD, spi, etc). Also, since these devices are + implemented within the fpga fabric every instance of the device can be + synthesised with different options that change the behaviour. + + Each IP-core has a set of parameters which the FPGA designer can use to + control how the core is synthesized. Historically, the EDK tool would + extract the device parameters relevant to device drivers and copy them + into an 'xparameters.h' in the form of #define symbols. This tells the + device drivers how the IP cores are configured, but it requres the kernel + to be recompiled every time the FPGA bitstream is resynthesized. + + The new approach is to export the parameters into the device tree and + generate a new device tree each time the FPGA bitstream changes. The + parameters which used to be exported as #defines will now become + properties of the device node. In general, device nodes for IP-cores + will take the following form: + + (name)@(base-address) { + compatible = "xlnx,(ip-core-name)-(HW_VER)" + [, (list of compatible devices), ...]; + reg = <(baseaddr) (size)>; + interrupt-parent = <&interrupt-controller-phandle>; + interrupts = < ... >; + xlnx,(parameter1) = "(string-value)"; + xlnx,(parameter2) = <(int-value)>; + }; + + (ip-core-name): the name of the ip block (given after the BEGIN + directive in system.mhs). Should be in lowercase + and all underscores '_' converted to dashes '-'. + (name): is derived from the "PARAMETER INSTANCE" value. + (parameter#): C_* parameters from system.mhs. The C_ prefix is + dropped from the parameter name, the name is converted + to lowercase and all underscore '_' characters are + converted to dashes '-'. + (baseaddr): the C_BASEADDR parameter. + (HW_VER): from the HW_VER parameter. + (size): equals C_HIGHADDR - C_BASEADDR + 1 + + Typically, the compatible list will include the exact IP core version + followed by an older IP core version which implements the same + interface or any other device with the same interface. + + 'reg', 'interrupt-parent' and 'interrupts' are all optional properties. + + For example, the following block from system.mhs: + + BEGIN opb_uartlite + PARAMETER INSTANCE = opb_uartlite_0 + PARAMETER HW_VER = 1.00.b + PARAMETER C_BAUDRATE = 115200 + PARAMETER C_DATA_BITS = 8 + PARAMETER C_ODD_PARITY = 0 + PARAMETER C_USE_PARITY = 0 + PARAMETER C_CLK_FREQ = 50000000 + PARAMETER C_BASEADDR = 0xEC100000 + PARAMETER C_HIGHADDR = 0xEC10FFFF + BUS_INTERFACE SOPB = opb_7 + PORT OPB_Clk = CLK_50MHz + PORT Interrupt = opb_uartlite_0_Interrupt + PORT RX = opb_uartlite_0_RX + PORT TX = opb_uartlite_0_TX + PORT OPB_Rst = sys_bus_reset_0 + END + + becomes the following device tree node: + + opb-uartlite-0@ec100000 { + device_type = "serial"; + compatible = "xlnx,opb-uartlite-1.00.b"; + reg = <ec100000 10000>; + interrupt-parent = <&opb-intc>; + interrupts = <1 0>; // got this from the opb_intc parameters + current-speed = <d#115200>; // standard serial device prop + clock-frequency = <d#50000000>; // standard serial device prop + xlnx,data-bits = <8>; + xlnx,odd-parity = <0>; + xlnx,use-parity = <0>; + }; + + Some IP cores actually implement 2 or more logical devices. In this case, + the device should still describe the whole IP core with a single node + and add a child node for each logical device. The ranges property can + be used to translate from parent IP-core to the registers of each device. + (Note: this makes the assumption that both logical devices have the same + bus binding. If this is not true, then separate nodes should be used for + each logical device). The 'cell-index' property can be used to enumerate + logical devices within an IP core. For example, the following is the + system.mhs entry for the dual ps2 controller found on the ml403 reference + design. + + BEGIN opb_ps2_dual_ref + PARAMETER INSTANCE = opb_ps2_dual_ref_0 + PARAMETER HW_VER = 1.00.a + PARAMETER C_BASEADDR = 0xA9000000 + PARAMETER C_HIGHADDR = 0xA9001FFF + BUS_INTERFACE SOPB = opb_v20_0 + PORT Sys_Intr1 = ps2_1_intr + PORT Sys_Intr2 = ps2_2_intr + PORT Clkin1 = ps2_clk_rx_1 + PORT Clkin2 = ps2_clk_rx_2 + PORT Clkpd1 = ps2_clk_tx_1 + PORT Clkpd2 = ps2_clk_tx_2 + PORT Rx1 = ps2_d_rx_1 + PORT Rx2 = ps2_d_rx_2 + PORT Txpd1 = ps2_d_tx_1 + PORT Txpd2 = ps2_d_tx_2 + END + + It would result in the following device tree nodes: + + opb_ps2_dual_ref_0@a9000000 { + ranges = <0 a9000000 2000>; + // If this device had extra parameters, then they would + // go here. + ps2@0 { + compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; + reg = <0 40>; + interrupt-parent = <&opb-intc>; + interrupts = <3 0>; + cell-index = <0>; + }; + ps2@1000 { + compatible = "xlnx,opb-ps2-dual-ref-1.00.a"; + reg = <1000 40>; + interrupt-parent = <&opb-intc>; + interrupts = <3 0>; + cell-index = <0>; + }; + }; + + Also, the system.mhs file defines bus attachments from the processor + to the devices. The device tree structure should reflect the bus + attachments. Again an example; this system.mhs fragment: + + BEGIN ppc405_virtex4 + PARAMETER INSTANCE = ppc405_0 + PARAMETER HW_VER = 1.01.a + BUS_INTERFACE DPLB = plb_v34_0 + BUS_INTERFACE IPLB = plb_v34_0 + END + + BEGIN opb_intc + PARAMETER INSTANCE = opb_intc_0 + PARAMETER HW_VER = 1.00.c + PARAMETER C_BASEADDR = 0xD1000FC0 + PARAMETER C_HIGHADDR = 0xD1000FDF + BUS_INTERFACE SOPB = opb_v20_0 + END + + BEGIN opb_uart16550 + PARAMETER INSTANCE = opb_uart16550_0 + PARAMETER HW_VER = 1.00.d + PARAMETER C_BASEADDR = 0xa0000000 + PARAMETER C_HIGHADDR = 0xa0001FFF + BUS_INTERFACE SOPB = opb_v20_0 + END + + BEGIN plb_v34 + PARAMETER INSTANCE = plb_v34_0 + PARAMETER HW_VER = 1.02.a + END + + BEGIN plb_bram_if_cntlr + PARAMETER INSTANCE = plb_bram_if_cntlr_0 + PARAMETER HW_VER = 1.00.b + PARAMETER C_BASEADDR = 0xFFFF0000 + PARAMETER C_HIGHADDR = 0xFFFFFFFF + BUS_INTERFACE SPLB = plb_v34_0 + END + + BEGIN plb2opb_bridge + PARAMETER INSTANCE = plb2opb_bridge_0 + PARAMETER HW_VER = 1.01.a + PARAMETER C_RNG0_BASEADDR = 0x20000000 + PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF + PARAMETER C_RNG1_BASEADDR = 0x60000000 + PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF + PARAMETER C_RNG2_BASEADDR = 0x80000000 + PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF + PARAMETER C_RNG3_BASEADDR = 0xC0000000 + PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF + BUS_INTERFACE SPLB = plb_v34_0 + BUS_INTERFACE MOPB = opb_v20_0 + END + + Gives this device tree (some properties removed for clarity): + + plb-v34-0 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "ibm,plb"; + ranges; // 1:1 translation + + plb-bram-if-cntrl-0@ffff0000 { + reg = <ffff0000 10000>; + } + + opb-v20-0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <20000000 20000000 20000000 + 60000000 60000000 20000000 + 80000000 80000000 40000000 + c0000000 c0000000 20000000>; + + opb-uart16550-0@a0000000 { + reg = <a00000000 2000>; + }; + + opb-intc-0@d1000fc0 { + reg = <d1000fc0 20>; + }; + }; + }; + + That covers the general approach to binding xilinx IP cores into the + device tree. The following are bindings for specific devices: + + i) Xilinx ML300 Framebuffer + + Simple framebuffer device from the ML300 reference design (also on the + ML403 reference design as well as others). + + Optional properties: + - resolution = <xres yres> : pixel resolution of framebuffer. Some + implementations use a different resolution. + Default is <d#640 d#480> + - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory. + Default is <d#1024 d#480>. + - rotate-display (empty) : rotate display 180 degrees. + + ii) Xilinx SystemACE + + The Xilinx SystemACE device is used to program FPGAs from an FPGA + bitstream stored on a CF card. It can also be used as a generic CF + interface device. + + Optional properties: + - 8-bit (empty) : Set this property for SystemACE in 8 bit mode + + iii) Xilinx EMAC and Xilinx TEMAC + + Xilinx Ethernet devices. In addition to general xilinx properties + listed above, nodes for these devices should include a phy-handle + property, and may include other common network device properties + like local-mac-address. + + iv) Xilinx Uartlite + + Xilinx uartlite devices are simple fixed speed serial ports. + + Requred properties: + - current-speed : Baud rate of uartlite + More devices will be defined as this spec matures. VII - Specifying interrupt information for devices diff --git a/MAINTAINERS b/MAINTAINERS index 1c7c229a0926..6a9702726239 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -787,23 +787,25 @@ B43 WIRELESS DRIVER P: Michael Buesch M: mb@bu3sch.de P: Stefano Brivio -M: st3@riseup.net +M: stefano.brivio@polimi.it L: linux-wireless@vger.kernel.org -W: http://bcm43xx.berlios.de/ +W: http://linuxwireless.org/en/users/Drivers/b43 S: Maintained B43LEGACY WIRELESS DRIVER P: Larry Finger M: Larry.Finger@lwfinger.net +P: Stefano Brivio +M: stefano.brivio@polimi.it L: linux-wireless@vger.kernel.org -W: http://bcm43xx.berlios.de/ +W: http://linuxwireless.org/en/users/Drivers/b43 S: Maintained BCM43XX WIRELESS DRIVER (SOFTMAC BASED VERSION) P: Larry Finger M: Larry.Finger@lwfinger.net P: Stefano Brivio -M: st3@riseup.net +M: stefano.brivio@polimi.it L: linux-wireless@vger.kernel.org W: http://bcm43xx.berlios.de/ S: Maintained diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a0cdaafa115b..a7e9fea978a6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1040,6 +1040,8 @@ source "drivers/power/Kconfig" source "drivers/hwmon/Kconfig" +source "drivers/watchdog/Kconfig" + source "drivers/ssb/Kconfig" #source "drivers/l3/Kconfig" diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c index bd5184fe177c..ca9c5b61283a 100644 --- a/arch/arm/mach-netx/xc.c +++ b/arch/arm/mach-netx/xc.c @@ -190,15 +190,15 @@ struct xc *request_xc(int xcno, struct device *dev) goto exit; if (!request_mem_region - (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(dev->kobj))) + (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(&dev->kobj))) goto exit_free; if (!request_mem_region - (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(dev->kobj))) + (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(&dev->kobj))) goto exit_release_1; if (!request_mem_region - (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(dev->kobj))) + (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(&dev->kobj))) goto exit_release_2; x->xpec_base = (void * __iomem)io_p2v(NETX_PA_XPEC(xcno)); diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index a2d45d742ce4..fbfa1920353d 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -68,6 +68,7 @@ pxa_ost0_interrupt(int irq, void *dev_id) if (c->mode == CLOCK_EVT_MODE_ONESHOT) { /* Disarm the compare/match, signal the event. */ OIER &= ~OIER_E0; + OSSR = OSSR_M0; c->event_handler(c); } else if (c->mode == CLOCK_EVT_MODE_PERIODIC) { /* Call the event handler as many times as necessary @@ -100,9 +101,9 @@ pxa_ost0_interrupt(int irq, void *dev_id) * anything that might put us "very close". */ #define MIN_OSCR_DELTA 16 - do { + do { OSSR = OSSR_M0; - next_match = (OSMR0 += LATCH); + next_match = (OSMR0 += LATCH); c->event_handler(c); } while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA) && (c->mode == CLOCK_EVT_MODE_PERIODIC)); @@ -114,14 +115,16 @@ pxa_ost0_interrupt(int irq, void *dev_id) static int pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev) { - unsigned long irqflags; + unsigned long flags, next, oscr; - raw_local_irq_save(irqflags); - OSMR0 = OSCR + delta; - OSSR = OSSR_M0; + raw_local_irq_save(flags); OIER |= OIER_E0; - raw_local_irq_restore(irqflags); - return 0; + next = OSCR + delta; + OSMR0 = next; + oscr = OSCR; + raw_local_irq_restore(flags); + + return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; } static void @@ -132,15 +135,16 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) switch (mode) { case CLOCK_EVT_MODE_PERIODIC: raw_local_irq_save(irqflags); - OSMR0 = OSCR + LATCH; OSSR = OSSR_M0; OIER |= OIER_E0; + OSMR0 = OSCR + LATCH; raw_local_irq_restore(irqflags); break; case CLOCK_EVT_MODE_ONESHOT: raw_local_irq_save(irqflags); OIER &= ~OIER_E0; + OSSR = OSSR_M0; raw_local_irq_restore(irqflags); break; @@ -149,6 +153,7 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) /* initializing, released, or preparing for suspend */ raw_local_irq_save(irqflags); OIER &= ~OIER_E0; + OSSR = OSSR_M0; raw_local_irq_restore(irqflags); break; diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 4493bcff5172..ee40c1a0b83d 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -171,7 +171,7 @@ static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg, * Called from map_io. We need to call to this early enough so that we * can reserve the fixed SDRAM regions before VM could get hold of them. */ -void omapfb_reserve_sdram(void) +void __init omapfb_reserve_sdram(void) { struct bootmem_data *bdata; unsigned long sdram_start, sdram_size; diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c index 4103c2c487f3..b841ecfd5d5a 100644 --- a/arch/frv/mm/init.c +++ b/arch/frv/mm/init.c @@ -197,7 +197,7 @@ void __init mem_init(void) /* * free the memory that was only required for initialisation */ -void __init free_initmem(void) +void free_initmem(void) { #if defined(CONFIG_RAMKERNEL) && !defined(CONFIG_PROTECT_KERNEL) unsigned long start, end, addr; diff --git a/arch/ia64/hp/sim/boot/fw-emu.c b/arch/ia64/hp/sim/boot/fw-emu.c index 1189d035d316..bf6d9d8c802f 100644 --- a/arch/ia64/hp/sim/boot/fw-emu.c +++ b/arch/ia64/hp/sim/boot/fw-emu.c @@ -285,7 +285,7 @@ sys_fw_init (const char *args, int arglen) } cmd_line[arglen] = '\0'; - memset(efi_systab, 0, sizeof(efi_systab)); + memset(efi_systab, 0, sizeof(*efi_systab)); efi_systab->hdr.signature = EFI_SYSTEM_TABLE_SIGNATURE; efi_systab->hdr.revision = ((1 << 16) | 00); efi_systab->hdr.headersize = sizeof(efi_systab->hdr); diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h index 466bbcb138b2..c5c872b250da 100644 --- a/arch/ia64/ia32/ia32priv.h +++ b/arch/ia64/ia32/ia32priv.h @@ -290,7 +290,6 @@ struct old_linux32_dirent { #define _ASM_IA64_ELF_H /* Don't include elf.h */ #include <linux/sched.h> -#include <asm/processor.h> /* * This is used to ensure we don't load something for the wrong architecture. diff --git a/arch/ia64/kernel/.gitignore b/arch/ia64/kernel/.gitignore new file mode 100644 index 000000000000..98307759a3b8 --- /dev/null +++ b/arch/ia64/kernel/.gitignore @@ -0,0 +1 @@ +gate.lds diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 3d45d24a9d61..897e2083a3b1 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -678,9 +678,11 @@ int __init acpi_boot_init(void) /* I/O APIC */ if (acpi_table_parse_madt - (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) - printk(KERN_ERR PREFIX - "Error parsing MADT - no IOSAPIC entries\n"); + (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) { + if (!ia64_platform_is("sn2")) + printk(KERN_ERR PREFIX + "Error parsing MADT - no IOSAPIC entries\n"); + } /* System-Level Interrupt Routing */ diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 6216eba2e38f..5181bf551f3c 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -218,9 +218,10 @@ efi_gettimeofday (struct timespec *ts) { efi_time_t tm; - memset(ts, 0, sizeof(ts)); - if ((*efi.get_time)(&tm, NULL) != EFI_SUCCESS) + if ((*efi.get_time)(&tm, NULL) != EFI_SUCCESS) { + memset(ts, 0, sizeof(*ts)); return; + } ts->tv_sec = mktime(tm.year, tm.month, tm.day, tm.hour, tm.minute, tm.second); ts->tv_nsec = tm.nanosecond; diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index cfe4654838f4..274a59383043 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -748,6 +748,15 @@ skip_numa_setup: #endif } +static inline unsigned char choose_dmode(void) +{ +#ifdef CONFIG_SMP + if (smp_int_redirect & SMP_IRQ_REDIRECTION) + return IOSAPIC_LOWEST_PRIORITY; +#endif + return IOSAPIC_FIXED; +} + /* * ACPI can describe IOSAPIC interrupts via static tables and namespace * methods. This provides an interface to register those interrupts and @@ -762,6 +771,7 @@ iosapic_register_intr (unsigned int gsi, unsigned long flags; struct iosapic_rte_info *rte; u32 low32; + unsigned char dmode; /* * If this GSI has already been registered (i.e., it's a @@ -791,8 +801,8 @@ iosapic_register_intr (unsigned int gsi, spin_lock(&irq_desc[irq].lock); dest = get_target_cpu(gsi, irq); - err = register_intr(gsi, irq, IOSAPIC_LOWEST_PRIORITY, - polarity, trigger); + dmode = choose_dmode(); + err = register_intr(gsi, irq, dmode, polarity, trigger); if (err < 0) { spin_unlock(&irq_desc[irq].lock); irq = err; @@ -961,10 +971,12 @@ iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi, { int vector, irq; unsigned int dest = cpu_physical_id(smp_processor_id()); + unsigned char dmode; irq = vector = isa_irq_to_vector(isa_irq); BUG_ON(bind_irq_vector(irq, vector, CPU_MASK_ALL)); - register_intr(gsi, irq, IOSAPIC_LOWEST_PRIORITY, polarity, trigger); + dmode = choose_dmode(); + register_intr(gsi, irq, dmode, polarity, trigger); DBG("ISA: IRQ %u -> GSI %u (%s,%s) -> CPU %d (0x%04x) vector %d\n", isa_irq, gsi, trigger == IOSAPIC_EDGE ? "edge" : "level", diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index 44be1c952b7c..6dee579f205f 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -61,9 +61,11 @@ int show_interrupts(struct seq_file *p, void *v) unsigned long flags; if (i == 0) { - seq_printf(p, " "); + char cpuname[16]; + seq_printf(p, " "); for_each_online_cpu(j) { - seq_printf(p, "CPU%d ",j); + snprintf(cpuname, 10, "CPU%d", j); + seq_printf(p, "%10s ", cpuname); } seq_putc(p, '\n'); } diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index cc87025e8f54..10b48cd15a87 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -571,7 +571,7 @@ out: * Outputs * None */ -static void __init +void ia64_mca_register_cpev (int cpev) { /* Register the CPE interrupt vector with SAL */ diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c index 6ef6ffb943a0..396004e8cd14 100644 --- a/arch/ia64/kernel/palinfo.c +++ b/arch/ia64/kernel/palinfo.c @@ -470,7 +470,7 @@ register_info(char *page) return p - page; } -static const char *proc_features[]={ +static char *proc_features_0[]={ /* Feature set 0 */ NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL, NULL,NULL,NULL,NULL,NULL,NULL,NULL, NULL,NULL, NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL, @@ -502,25 +502,92 @@ static const char *proc_features[]={ "Enable BERR promotion" }; +static char *proc_features_16[]={ /* Feature set 16 */ + "Disable ETM", + "Enable ETM", + "Enable MCA on half-way timer", + "Enable snoop WC", + NULL, + "Enable Fast Deferral", + "Disable MCA on memory aliasing", + "Enable RSB", + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "DP system processor", + "Low Voltage", + "HT supported", + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL +}; + +static char **proc_features[]={ + proc_features_0, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, + proc_features_16, + NULL, NULL, NULL, NULL, +}; + +static char * +feature_set_info(char *page, u64 avail, u64 status, u64 control, u64 set) +{ + char *p = page; + char **vf, **v; + int i; + + vf = v = proc_features[set]; + for(i=0; i < 64; i++, avail >>=1, status >>=1, control >>=1) { + + if (!(control)) /* No remaining bits set */ + break; + if (!(avail & 0x1)) /* Print only bits that are available */ + continue; + if (vf) + v = vf + i; + if ( v && *v ) { + p += sprintf(p, "%-40s : %s %s\n", *v, + avail & 0x1 ? (status & 0x1 ? + "On " : "Off"): "", + avail & 0x1 ? (control & 0x1 ? + "Ctrl" : "NoCtrl"): ""); + } else { + p += sprintf(p, "Feature set %2ld bit %2d\t\t\t" + " : %s %s\n", + set, i, + avail & 0x1 ? (status & 0x1 ? + "On " : "Off"): "", + avail & 0x1 ? (control & 0x1 ? + "Ctrl" : "NoCtrl"): ""); + } + } + return p; +} static int processor_info(char *page) { char *p = page; - const char **v = proc_features; - u64 avail=1, status=1, control=1; - int i; + u64 avail=1, status=1, control=1, feature_set=0; s64 ret; - if ((ret=ia64_pal_proc_get_features(&avail, &status, &control)) != 0) return 0; + do { + ret = ia64_pal_proc_get_features(&avail, &status, &control, + feature_set); + if (ret < 0) { + return p - page; + } + if (ret == 1) { + feature_set++; + continue; + } + + p = feature_set_info(p, avail, status, control, feature_set); + + feature_set++; + } while(1); - for(i=0; i < 64; i++, v++,avail >>=1, status >>=1, control >>=1) { - if ( ! *v ) continue; - p += sprintf(p, "%-40s : %s%s %s\n", *v, - avail & 0x1 ? "" : "NotImpl", - avail & 0x1 ? (status & 0x1 ? "On" : "Off"): "", - avail & 0x1 ? (control & 0x1 ? "Ctrl" : "NoCtrl"): ""); - } return p - page; } diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c index e796e29f8e15..2cb9425e0421 100644 --- a/arch/ia64/kernel/patch.c +++ b/arch/ia64/kernel/patch.c @@ -129,9 +129,6 @@ ia64_patch_mckinley_e9 (unsigned long start, unsigned long end) first_time = 0; if (need_workaround) printk(KERN_INFO "Leaving McKinley Errata 9 workaround enabled\n"); - else - printk(KERN_INFO "McKinley Errata 9 workaround not needed; " - "disabling it\n"); } if (need_workaround) return; diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 59169bf7145f..73e7c2e40b54 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -558,7 +558,7 @@ static ctl_table pfm_sysctl_dir[] = { { .ctl_name = CTL_UNNUMBERED, .procname = "perfmon", - .mode = 0755, + .mode = 0555, .child = pfm_ctl_table, }, {} @@ -567,7 +567,7 @@ static ctl_table pfm_sysctl_root[] = { { .ctl_name = CTL_KERN, .procname = "kernel", - .mode = 0755, + .mode = 0555, .child = pfm_sysctl_dir, }, {} diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index d3c538be466c..7e9c275ea148 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -146,6 +146,46 @@ find_bootmap_location (unsigned long start, unsigned long end, void *arg) return 0; } +#ifdef CONFIG_SMP +static void *cpu_data; +/** + * per_cpu_init - setup per-cpu variables + * + * Allocate and setup per-cpu data areas. + */ +void * __cpuinit +per_cpu_init (void) +{ + int cpu; + static int first_time=1; + + /* + * get_free_pages() cannot be used before cpu_init() done. BSP + * allocates "NR_CPUS" pages for all CPUs to avoid that AP calls + * get_zeroed_page(). + */ + if (first_time) { + first_time=0; + for (cpu = 0; cpu < NR_CPUS; cpu++) { + memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start); + __per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start; + cpu_data += PERCPU_PAGE_SIZE; + per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; + } + } + return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; +} + +static inline void +alloc_per_cpu_data(void) +{ + cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS, + PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); +} +#else +#define alloc_per_cpu_data() do { } while (0) +#endif /* CONFIG_SMP */ + /** * find_memory - setup memory map * @@ -182,41 +222,9 @@ find_memory (void) find_initrd(); + alloc_per_cpu_data(); } -#ifdef CONFIG_SMP -/** - * per_cpu_init - setup per-cpu variables - * - * Allocate and setup per-cpu data areas. - */ -void * __cpuinit -per_cpu_init (void) -{ - void *cpu_data; - int cpu; - static int first_time=1; - - /* - * get_free_pages() cannot be used before cpu_init() done. BSP - * allocates "NR_CPUS" pages for all CPUs to avoid that AP calls - * get_zeroed_page(). - */ - if (first_time) { - first_time=0; - cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS, - PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); - for (cpu = 0; cpu < NR_CPUS; cpu++) { - memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start); - __per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start; - cpu_data += PERCPU_PAGE_SIZE; - per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; - } - } - return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; -} -#endif /* CONFIG_SMP */ - static int count_pages (u64 start, u64 end, void *arg) { diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 0f9b12683bf3..53351c3cd7b1 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. */ #include <linux/irq.h> @@ -85,12 +85,18 @@ static void sn_shutdown_irq(unsigned int irq) { } +extern void ia64_mca_register_cpev(int); + static void sn_disable_irq(unsigned int irq) { + if (irq == local_vector_to_irq(IA64_CPE_VECTOR)) + ia64_mca_register_cpev(0); } static void sn_enable_irq(unsigned int irq) { + if (irq == local_vector_to_irq(IA64_CPE_VECTOR)) + ia64_mca_register_cpev(irq); } static void sn_ack_irq(unsigned int irq) diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index e336e1692a73..81785b78bc1e 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2004-2007 Silicon Graphics, Inc. All Rights Reserved. */ @@ -257,7 +257,9 @@ xpc_hb_checker(void *ignore) set_cpus_allowed(current, cpumask_of_cpu(XPC_HB_CHECK_CPU)); + /* set our heartbeating to other partitions into motion */ xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ); + xpc_hb_beater(0); while (!(volatile int) xpc_exiting) { @@ -1338,16 +1340,8 @@ xpc_init(void) dev_warn(xpc_part, "can't register die notifier\n"); } - - /* - * Set the beating to other partitions into motion. This is - * the last requirement for other partitions' discovery to - * initiate communications with us. - */ init_timer(&xpc_hb_timer); xpc_hb_timer.function = xpc_hb_beater; - xpc_hb_beater(0); - /* * The real work-horse behind xpc. This processes incoming diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts index fa681f5343fe..754fa3960f83 100644 --- a/arch/powerpc/boot/dts/walnut.dts +++ b/arch/powerpc/boot/dts/walnut.dts @@ -122,7 +122,9 @@ device_type = "network"; compatible = "ibm,emac-405gp", "ibm,emac"; interrupt-parent = <&UIC0>; - interrupts = <9 4 f 4>; + interrupts = < + f 4 /* Ethernet */ + 9 4 /* Ethernet Wake Up */>; local-mac-address = [000000000000]; /* Filled in by zImage */ reg = <ef600800 70>; mal-device = <&MAL>; diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 39b27e5ef6c1..31147a037728 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -21,6 +21,14 @@ # (default ./arch/powerpc/boot) # -W dir specify working directory for temporary files (default .) +# Stop execution if any command fails +set -e + +# Allow for verbose output +if [ "$V" = 1 ]; then + set -x +fi + # defaults kernel= ofile=zImage @@ -111,7 +119,7 @@ if [ -n "$dts" ]; then if [ -z "$dtb" ]; then dtb="$platform.dtb" fi - dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" || exit 1 + dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" fi if [ -z "$kernel" ]; then @@ -149,7 +157,6 @@ cuboot*) ps3) platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o" lds=$object/zImage.ps3.lds - binary=y gzip= ext=bin objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data" @@ -233,7 +240,7 @@ entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | cut -d' ' -f3` if [ -n "$binary" ]; then mv "$ofile" "$ofile".elf - ${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin + ${CROSS}objcopy -O binary "$ofile".elf "$ofile" fi # post-processing needed for some platforms @@ -246,9 +253,9 @@ coff) $object/hack-coff "$ofile" ;; cuboot*) - gzip -f -9 "$ofile".bin + gzip -f -9 "$ofile" mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \ - $uboot_version -d "$ofile".bin.gz "$ofile" + $uboot_version -d "$ofile".gz "$ofile" ;; treeboot*) mv "$ofile" "$ofile.elf" @@ -269,11 +276,11 @@ ps3) # then copied to offset 0x100. At runtime the bootwrapper program # copies the 0x100 bytes at __system_reset_kernel to addr 0x100. - system_reset_overlay=0x`${CROSS}nm "$ofile".elf \ + system_reset_overlay=0x`${CROSS}nm "$ofile" \ | grep ' __system_reset_overlay$' \ | cut -d' ' -f1` system_reset_overlay=`printf "%d" $system_reset_overlay` - system_reset_kernel=0x`${CROSS}nm "$ofile".elf \ + system_reset_kernel=0x`${CROSS}nm "$ofile" \ | grep ' __system_reset_kernel$' \ | cut -d' ' -f1` system_reset_kernel=`printf "%d" $system_reset_kernel` @@ -282,23 +289,15 @@ ps3) rm -f "$object/otheros.bld" - msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ - skip=$overlay_dest seek=$system_reset_kernel \ - count=$overlay_size bs=1 2>&1) + ${CROSS}objcopy -O binary "$ofile" "$ofile.bin" - if [ $? -ne "0" ]; then - echo $msg - exit 1 - fi - - msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ - skip=$system_reset_overlay seek=$overlay_dest \ - count=$overlay_size bs=1 2>&1) + dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ + skip=$overlay_dest seek=$system_reset_kernel \ + count=$overlay_size bs=1 - if [ $? -ne "0" ]; then - echo $msg - exit 2 - fi + dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ + skip=$system_reset_overlay seek=$overlay_dest \ + count=$overlay_size bs=1 gzip --force -9 --stdout "$ofile.bin" > "$object/otheros.bld" ;; diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index 1ccf3ed7693e..78c968aade4e 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Thu Aug 30 16:40:47 2007 +# Linux kernel version: 2.6.24-rc2 +# Tue Nov 6 23:23:50 2007 # CONFIG_PPC64=y @@ -10,6 +10,7 @@ CONFIG_PPC64=y # CONFIG_POWER4_ONLY=y CONFIG_POWER4=y +# CONFIG_TUNE_CELL is not set CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y @@ -18,8 +19,13 @@ CONFIG_PPC_MM_SLICES=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_64BIT=y +CONFIG_WORD_SIZE=64 CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y @@ -65,7 +71,10 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_CPUSETS is not set +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -86,7 +95,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -107,14 +115,15 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set @@ -125,7 +134,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_EMBEDDED6xx is not set # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set @@ -141,6 +149,7 @@ CONFIG_PPC_PASEMI=y # PA Semi PWRficient options # CONFIG_PPC_PASEMI_IOMMU=y +# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set CONFIG_PPC_PASEMI_MDIO=y CONFIG_ELECTRA_IDE=y # CONFIG_PPC_CELLEB is not set @@ -156,29 +165,52 @@ CONFIG_MPIC=y # CONFIG_U3_DART is not set # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set +CONFIG_MPIC_BROKEN_REGREAD=y # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set + +# +# CPU Frequency drivers +# +CONFIG_PPC_PASEMI_CPUFREQ=y # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # # Kernel options # -CONFIG_HZ_100=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=100 +CONFIG_HZ_1000=y +CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_BKL is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_FORCE_MAX_ZONEORDER=9 CONFIG_IOMMU_VMERGE=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # CONFIG_KEXEC is not set @@ -196,12 +228,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -# CONFIG_PPC_HAS_HASH_64K is not set -# CONFIG_PPC_64K_PAGES is not set +CONFIG_PPC_HAS_HASH_64K=y +CONFIG_PPC_64K_PAGES=y # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -222,11 +255,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# CONFIG_PCCARD=y CONFIG_PCMCIA_DEBUG=y CONFIG_PCMCIA=y @@ -240,6 +270,7 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set +# CONFIG_ELECTRA_CF is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_KERNEL_START=0xc000000000000000 @@ -255,7 +286,7 @@ CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set CONFIG_NET_KEY=y @@ -281,6 +312,7 @@ CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -306,10 +338,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -338,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -361,6 +390,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -385,6 +415,7 @@ CONFIG_MTD_CFI_I2=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -402,7 +433,15 @@ CONFIG_MTD_PHRAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # @@ -455,10 +494,42 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set -# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# # CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set # @@ -498,10 +569,11 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -CONFIG_BLK_DEV_3W_XXXX_RAID=y -CONFIG_SCSI_3W_9XXX=y +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set @@ -574,9 +646,10 @@ CONFIG_ATA_GENERIC=y # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PCMCIA is not set +CONFIG_PATA_PCMCIA=y # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -589,41 +662,13 @@ CONFIG_ATA_GENERIC=y # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# -CONFIG_IEEE1394_PCILYNX=y -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -# CONFIG_IEEE1394_VIDEO1394 is not set -CONFIG_IEEE1394_SBP2=y -# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y @@ -633,6 +678,8 @@ CONFIG_DUMMY=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y @@ -649,6 +696,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -657,13 +705,16 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -682,6 +733,7 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -689,6 +741,7 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set @@ -697,12 +750,15 @@ CONFIG_TIGON3=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set CONFIG_PASEMI_MAC=y # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # @@ -749,7 +805,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=y -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -810,15 +865,12 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=4 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_PASEMI=y CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set # # PCMCIA character devices @@ -896,8 +948,6 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -905,12 +955,12 @@ CONFIG_HWMON_VID=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -946,6 +996,13 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -963,14 +1020,14 @@ CONFIG_DAB=y # # Graphics support # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_BACKLIGHT_CLASS_DEVICE=y - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_AGP is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +CONFIG_DRM_RADEON=y +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set CONFIG_VGASTATE=y # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y @@ -979,6 +1036,7 @@ CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -1026,6 +1084,15 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_PM3 is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -1178,6 +1245,7 @@ CONFIG_SND_USB_USX2Y=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -1328,6 +1396,7 @@ CONFIG_RTC_INTF_DEV=y # I2C RTC drivers # CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set @@ -1357,19 +1426,6 @@ CONFIG_RTC_DRV_DS1307=y # # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# # Userspace I/O # # CONFIG_UIO is not set @@ -1388,7 +1444,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1436,7 +1491,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=y # @@ -1449,30 +1503,43 @@ CONFIG_CONFIGFS_FS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y # CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set @@ -1501,10 +1568,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1545,10 +1608,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # CONFIG_UCC_SLOW is not set @@ -1561,23 +1620,24 @@ CONFIG_CRC_CCITT=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y - -# -# Instrumentation Support -# +CONFIG_INSTRUMENTATION=y CONFIG_PROFILING=y CONFIG_OPROFILE=y # CONFIG_KPROBES is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1586,7 +1646,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_SLUB_DEBUG_ON is not set @@ -1601,9 +1661,12 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set # CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1620,6 +1683,7 @@ CONFIG_XMON_DISASSEMBLY=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y @@ -1628,34 +1692,38 @@ CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_ECB is not set CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set +CONFIG_CRYPTO_BLOWFISH=y # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_HW is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 05582af50c5b..3e90c835fe12 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Thu Aug 30 16:47:09 2007 +# Linux kernel version: 2.6.24-rc2 +# Tue Nov 6 23:43:56 2007 # CONFIG_PPC64=y @@ -11,6 +11,7 @@ CONFIG_PPC64=y # CONFIG_POWER4_ONLY is not set CONFIG_POWER3=y CONFIG_POWER4=y +# CONFIG_TUNE_CELL is not set CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y @@ -19,8 +20,13 @@ CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=32 CONFIG_64BIT=y +CONFIG_WORD_SIZE=64 CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y @@ -72,8 +78,15 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_CPUACCT is not set CONFIG_CPUSETS=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_PROC_PID_CPUSET=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" @@ -93,7 +106,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -114,6 +126,7 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -132,7 +145,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_EMBEDDED6xx is not set # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set @@ -155,7 +167,15 @@ CONFIG_VIOPATH=y CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y CONFIG_PPC_MAPLE=y -# CONFIG_PPC_PASEMI is not set +CONFIG_PPC_PASEMI=y + +# +# PA Semi PWRficient options +# +CONFIG_PPC_PASEMI_IOMMU=y +# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set +CONFIG_PPC_PASEMI_MDIO=y +CONFIG_ELECTRA_IDE=y CONFIG_PPC_CELLEB=y # CONFIG_PPC_PS3 is not set CONFIG_PPC_CELL=y @@ -188,6 +208,7 @@ CONFIG_RTAS_FLASH=m CONFIG_PPC_PMI=m CONFIG_MMIO_NVRAM=y CONFIG_MPIC_U3_HT_IRQS=y +CONFIG_MPIC_BROKEN_REGREAD=y CONFIG_IBMVIO=y # CONFIG_IBMEBUS is not set # CONFIG_PPC_MPC106 is not set @@ -201,6 +222,8 @@ CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -211,6 +234,7 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y # CPU Frequency drivers # CONFIG_CPU_FREQ_PMAC64=y +CONFIG_PPC_PASEMI_CPUFREQ=y # CONFIG_CPM2 is not set CONFIG_AXON_RAM=m # CONFIG_FSL_ULI1575 is not set @@ -254,6 +278,8 @@ CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_SPLIT_PTLOCK_CPUS=4 @@ -268,6 +294,7 @@ CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SUSPEND_SMP_POSSIBLE=y +CONFIG_HIBERNATION_SMP_POSSIBLE=y CONFIG_SECCOMP=y # CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y @@ -284,12 +311,22 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y # -# PCCARD (PCMCIA/CardBus) support +# PC-card bridges # -# CONFIG_PCCARD is not set +# CONFIG_YENTA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_ELECTRA_CF=y CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_FAKE is not set # CONFIG_HOTPLUG_PCI_CPCI is not set @@ -319,7 +356,10 @@ CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=y # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set @@ -333,6 +373,7 @@ CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -404,6 +445,7 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XT_MATCH_TIME is not set CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -465,10 +507,6 @@ CONFIG_LLC=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -498,6 +536,7 @@ CONFIG_NET_CLS_ROUTE=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -539,6 +578,8 @@ CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set @@ -550,6 +591,11 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y @@ -557,8 +603,6 @@ CONFIG_IDEPCI_PCIBUS_ORDER=y CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y @@ -590,7 +634,7 @@ CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set # @@ -631,6 +675,7 @@ CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_SRP_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set @@ -671,19 +716,20 @@ CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC390T is not set CONFIG_SCSI_DEBUG=m # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y CONFIG_ATA_NONSTANDARD=y # CONFIG_SATA_AHCI is not set CONFIG_SATA_SVW=y # CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set +CONFIG_SATA_MV=y # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set +CONFIG_SATA_SIL24=y # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -713,8 +759,10 @@ CONFIG_SATA_SVW=y # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +CONFIG_PATA_PCMCIA=y # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -725,6 +773,7 @@ CONFIG_SATA_SVW=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set CONFIG_PATA_WINBOND=y +CONFIG_PATA_PLATFORM=y CONFIG_PATA_SCC=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -745,15 +794,10 @@ CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m # CONFIG_DM_MULTIPATH_RDAC is not set +# CONFIG_DM_MULTIPATH_HP is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -800,13 +844,15 @@ CONFIG_BONDING=m # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set -CONFIG_PHYLIB=m +CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=m +CONFIG_MARVELL_PHY=y # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set @@ -818,6 +864,9 @@ CONFIG_BROADCOM_PHY=m CONFIG_FIXED_PHY=m CONFIG_FIXED_MII_10_FDX=y CONFIG_FIXED_MII_100_FDX=y +# CONFIG_FIXED_MII_1000_FDX is not set +CONFIG_FIXED_MII_AMNT=1 +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -829,6 +878,11 @@ CONFIG_VORTEX=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_IBMVETH=m +# CONFIG_IBM_NEW_EMAC is not set +CONFIG_IBM_NEW_EMAC_ZMII=y +CONFIG_IBM_NEW_EMAC_RGMII=y +CONFIG_IBM_NEW_EMAC_TAH=y +CONFIG_IBM_NEW_EMAC_EMAC4=y CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_PCNET32_NAPI is not set @@ -836,7 +890,6 @@ CONFIG_PCNET32=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set @@ -856,6 +909,7 @@ CONFIG_ACENIC_OMIT_TIGON_I=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -863,6 +917,7 @@ CONFIG_E1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set @@ -872,13 +927,16 @@ CONFIG_SPIDER_NET=m CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set -CONFIG_PASEMI_MAC=m +# CONFIG_NIU is not set +CONFIG_PASEMI_MAC=y # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set CONFIG_TR=y CONFIG_IBMOL=y # CONFIG_3C359 is not set @@ -899,6 +957,7 @@ CONFIG_IBMOL=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set CONFIG_ISERIES_VETH=m # CONFIG_FDDI is not set @@ -918,6 +977,7 @@ CONFIG_SLHC=m # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y @@ -939,7 +999,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set @@ -1002,6 +1061,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_PCI=y +# CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -1029,14 +1089,18 @@ CONFIG_HVC_RTAS=y CONFIG_HVC_BEAT=y CONFIG_HVCS=m # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set @@ -1068,6 +1132,7 @@ CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_PASEMI=y # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set @@ -1106,6 +1171,13 @@ CONFIG_I2C_POWERMAC=y # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -1122,18 +1194,8 @@ CONFIG_I2C_POWERMAC=y # # Graphics support # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y - -# -# Display device support -# -CONFIG_DISPLAY_SUPPORT=y - -# -# Display hardware drivers -# +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y @@ -1142,6 +1204,7 @@ CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -1192,6 +1255,19 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_PM3 is not set CONFIG_FB_IBM_GXT4500=y # CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# # # Console display driver support @@ -1333,6 +1409,12 @@ CONFIG_SND_AOA_SOUNDBUS_I2S=m # CONFIG_SND_USB_CAIAQ is not set # +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# # System on Chip audio support # # CONFIG_SND_SOC is not set @@ -1348,6 +1430,7 @@ CONFIG_SND_AOA_SOUNDBUS_I2S=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -1489,19 +1572,53 @@ CONFIG_EDAC=y # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y -# CONFIG_RTC_CLASS is not set +CONFIG_EDAC_PASEMI=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # -# DMA Engine support +# SPI RTC drivers # -# CONFIG_DMA_ENGINE is not set # -# DMA Clients +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Devices +# on-CPU RTC drivers # # @@ -1585,7 +1702,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1604,10 +1720,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y @@ -1619,6 +1732,7 @@ CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m @@ -1626,6 +1740,7 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_XPRT_RDMA=m # CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m @@ -1662,10 +1777,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1706,10 +1817,6 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # CONFIG_UCC_SLOW is not set @@ -1733,18 +1840,17 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y - -# -# Instrumentation Support -# +CONFIG_INSTRUMENTATION=y CONFIG_PROFILING=y CONFIG_OPROFILE=y # CONFIG_KPROBES is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1768,9 +1874,12 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set @@ -1780,6 +1889,7 @@ CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set CONFIG_XMON_DISASSEMBLY=y CONFIG_IRQSTACKS=y +# CONFIG_VIRQ_DEBUG is not set CONFIG_BOOTX_TEXT=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1788,6 +1898,7 @@ CONFIG_BOOTX_TEXT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y @@ -1812,6 +1923,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1826,9 +1938,12 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index d3fb7d0c6c1c..9ed351f3c966 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1104,6 +1104,16 @@ static struct cpu_spec __initdata cpu_specs[] = { { .pvr_mask = 0xf0000fff, .pvr_value = 0x40000850, + .cpu_name = "440GR Rev. A", + .cpu_features = CPU_FTRS_44X, + .cpu_user_features = COMMON_USER_BOOKE, + .icache_bsize = 32, + .dcache_bsize = 32, + .platform = "ppc440", + }, + { /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */ + .pvr_mask = 0xf0000fff, + .pvr_value = 0x40000858, .cpu_name = "440EP Rev. A", .cpu_features = CPU_FTRS_44X, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, @@ -1115,28 +1125,27 @@ static struct cpu_spec __initdata cpu_specs[] = { { .pvr_mask = 0xf0000fff, .pvr_value = 0x400008d3, - .cpu_name = "440EP Rev. B", + .cpu_name = "440GR Rev. B", .cpu_features = CPU_FTRS_44X, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, .icache_bsize = 32, .dcache_bsize = 32, - .cpu_setup = __setup_cpu_440ep, .platform = "ppc440", }, - { /* 440EPX */ - .pvr_mask = 0xf0000ffb, - .pvr_value = 0x200008D0, - .cpu_name = "440EPX", + { /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */ + .pvr_mask = 0xf0000fff, + .pvr_value = 0x400008db, + .cpu_name = "440EP Rev. B", .cpu_features = CPU_FTRS_44X, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, .icache_bsize = 32, .dcache_bsize = 32, - .cpu_setup = __setup_cpu_440epx, + .cpu_setup = __setup_cpu_440ep, .platform = "ppc440", }, { /* 440GRX */ .pvr_mask = 0xf0000ffb, - .pvr_value = 0x200008D8, + .pvr_value = 0x200008D0, .cpu_name = "440GRX", .cpu_features = CPU_FTRS_44X, .cpu_user_features = COMMON_USER_BOOKE, @@ -1145,6 +1154,17 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_440grx, .platform = "ppc440", }, + { /* Use logical PVR for 440EPx (logical pvr = pvr | 0x8) */ + .pvr_mask = 0xf0000ffb, + .pvr_value = 0x200008D8, + .cpu_name = "440EPX", + .cpu_features = CPU_FTRS_44X, + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_440epx, + .platform = "ppc440", + }, { /* 440GP Rev. B */ .pvr_mask = 0xf0000fff, .pvr_value = 0x40000440, diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 21d889e63e87..a7572cf464bd 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -244,6 +244,13 @@ syscall_exit_cont: andis. r10,r0,DBCR0_IC@h bnel- load_dbcr0 #endif +#ifdef CONFIG_44x + lis r4,icache_44x_need_flush@ha + lwz r5,icache_44x_need_flush@l(r4) + cmplwi cr0,r5,0 + bne- 2f +1: +#endif /* CONFIG_44x */ stwcx. r0,0,r1 /* to clear the reservation */ lwz r4,_LINK(r1) lwz r5,_CCR(r1) @@ -258,6 +265,12 @@ syscall_exit_cont: mtspr SPRN_SRR1,r8 SYNC RFI +#ifdef CONFIG_44x +2: li r7,0 + iccci r0,r0 + stw r7,icache_44x_need_flush@l(r4) + b 1b +#endif /* CONFIG_44x */ 66: li r3,-ENOSYS b ret_from_syscall @@ -683,6 +696,16 @@ resume_kernel: /* interrupts are hard-disabled at this point */ restore: +#ifdef CONFIG_44x + lis r4,icache_44x_need_flush@ha + lwz r5,icache_44x_need_flush@l(r4) + cmplwi cr0,r5,0 + beq+ 1f + li r6,0 + iccci r0,r0 + stw r6,icache_44x_need_flush@l(r4) +1: +#endif /* CONFIG_44x */ lwz r0,GPR0(r1) lwz r2,GPR2(r1) REST_4GPRS(3, r1) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 97c5857faf00..c34986835a4e 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -904,7 +904,7 @@ handle_page_fault: */ 12: bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD - lwz r4,_DAR(r1) + ld r4,_DAR(r1) bl .low_hash_fault b .ret_from_except diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index abd2957fe537..c3cf0e8f3ac1 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -122,7 +122,7 @@ static ctl_table powersave_nap_sysctl_root[] = { { .ctl_name = CTL_KERN, .procname = "kernel", - .mode = 0755, + .mode = 0555, .child = powersave_nap_ctl_table, }, {} diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 8533de50347d..8b642ab26d37 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -288,7 +288,16 @@ _GLOBAL(_tlbia) */ _GLOBAL(_tlbie) #if defined(CONFIG_40x) + /* We run the search with interrupts disabled because we have to change + * the PID and I don't want to preempt when that happens. + */ + mfmsr r5 + mfspr r6,SPRN_PID + wrteei 0 + mtspr SPRN_PID,r4 tlbsx. r3, 0, r3 + mtspr SPRN_PID,r6 + wrtee r5 bne 10f sync /* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear. @@ -297,23 +306,23 @@ _GLOBAL(_tlbie) tlbwe r3, r3, TLB_TAG isync 10: + #elif defined(CONFIG_44x) - mfspr r4,SPRN_MMUCR - mfspr r5,SPRN_PID /* Get PID */ - rlwimi r4,r5,0,24,31 /* Set TID */ + mfspr r5,SPRN_MMUCR + rlwimi r5,r4,0,24,31 /* Set TID */ /* We have to run the search with interrupts disabled, even critical * and debug interrupts (in fact the only critical exceptions we have * are debug and machine check). Otherwise an interrupt which causes * a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */ - mfmsr r5 + mfmsr r4 lis r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha addi r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l - andc r6,r5,r6 + andc r6,r4,r6 mtmsr r6 - mtspr SPRN_MMUCR,r4 + mtspr SPRN_MMUCR,r5 tlbsx. r3, 0, r3 - mtmsr r5 + mtmsr r4 bne 10f sync /* There are only 64 TLB entries, so r3 < 64, @@ -534,12 +543,21 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) addi r3,r3,L1_CACHE_BYTES bdnz 0b sync +#ifndef CONFIG_44x + /* We don't flush the icache on 44x. Those have a virtual icache + * and we don't have access to the virtual address here (it's + * not the page vaddr but where it's mapped in user space). The + * flushing of the icache on these is handled elsewhere, when + * a change in the address space occurs, before returning to + * user space + */ mtctr r4 1: icbi 0,r6 addi r6,r6,L1_CACHE_BYTES bdnz 1b sync isync +#endif /* CONFIG_44x */ blr /* diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index b9d88374f14f..41e13f4cc6e3 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -350,7 +350,7 @@ struct task_struct *__switch_to(struct task_struct *prev, local_irq_save(flags); account_system_vtime(current); - account_process_vtime(current); + account_process_tick(current, 0); calculate_steal_time(); last = _switch(old_thread, new_thread); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 9f329a8928ea..acc0d247d3c3 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -697,6 +697,18 @@ static int __init early_init_dt_scan_cpus(unsigned long node, prop = of_get_flat_dt_prop(node, "cpu-version", NULL); if (prop && (*prop & 0xff000000) == 0x0f000000) identify_cpu(0, *prop); +#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU) + /* + * Since 440GR(x)/440EP(x) processors have the same pvr, + * we check the node path and set bit 28 in the cur_cpu_spec + * pvr for EP(x) processor version. This bit is always 0 in + * the "real" pvr. Then we call identify_cpu again with + * the new logical pvr to enable FPU support. + */ + if (strstr(uname, "440EP")) { + identify_cpu(0, cur_cpu_spec->pvr_value | 0x8); + } +#endif } check_cpu_feature_properties(node); diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 1db10f70ae69..1add6efdb315 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1244,7 +1244,7 @@ static void __init prom_initialize_tce_table(void) local_alloc_bottom = base; /* It seems OF doesn't null-terminate the path :-( */ - memset(path, 0, sizeof(path)); + memset(path, 0, PROM_SCRATCH_SIZE); /* Call OF to setup the TCE hardware */ if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1) == PROM_ERROR) { diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index ede77dbbd4df..3b1529c103ef 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -291,23 +291,16 @@ static void __init initialize_cache_info(void) if ( num_cpus == 1 ) { const u32 *sizep, *lsizep; u32 size, lsize; - const char *dc, *ic; - - /* Then read cache informations */ - if (machine_is(powermac)) { - dc = "d-cache-block-size"; - ic = "i-cache-block-size"; - } else { - dc = "d-cache-line-size"; - ic = "i-cache-line-size"; - } size = 0; lsize = cur_cpu_spec->dcache_bsize; sizep = of_get_property(np, "d-cache-size", NULL); if (sizep != NULL) size = *sizep; - lsizep = of_get_property(np, dc, NULL); + lsizep = of_get_property(np, "d-cache-block-size", NULL); + /* fallback if block size missing */ + if (lsizep == NULL) + lsizep = of_get_property(np, "d-cache-line-size", NULL); if (lsizep != NULL) lsize = *lsizep; if (sizep == 0 || lsizep == 0) @@ -324,7 +317,9 @@ static void __init initialize_cache_info(void) sizep = of_get_property(np, "i-cache-size", NULL); if (sizep != NULL) size = *sizep; - lsizep = of_get_property(np, ic, NULL); + lsizep = of_get_property(np, "i-cache-block-size", NULL); + if (lsizep == NULL) + lsizep = of_get_property(np, "i-cache-line-size", NULL); if (lsizep != NULL) lsize = *lsizep; if (sizep == 0 || lsizep == 0) diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S index 69e8f86aa4f8..77fc76607ab2 100644 --- a/arch/powerpc/kernel/swsusp_32.S +++ b/arch/powerpc/kernel/swsusp_32.S @@ -133,10 +133,12 @@ _GLOBAL(swsusp_arch_suspend) /* Resume code */ _GLOBAL(swsusp_arch_resume) +#ifdef CONFIG_ALTIVEC /* Stop pending alitvec streams and memory accesses */ BEGIN_FTR_SECTION DSSALL END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) +#endif sync /* Disable MSR:DR to make sure we don't take a TLB or diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 9eb3284deac4..4beb6329dfb7 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -259,7 +259,7 @@ void account_system_vtime(struct task_struct *tsk) * user and system time records. * Must be called with interrupts disabled. */ -void account_process_vtime(struct task_struct *tsk) +void account_process_tick(struct task_struct *tsk, int user_tick) { cputime_t utime, utimescaled; @@ -274,18 +274,6 @@ void account_process_vtime(struct task_struct *tsk) account_user_time_scaled(tsk, utimescaled); } -static void account_process_time(struct pt_regs *regs) -{ - int cpu = smp_processor_id(); - - account_process_vtime(current); - run_local_timers(); - if (rcu_pending(cpu)) - rcu_check_callbacks(cpu, user_mode(regs)); - scheduler_tick(); - run_posix_cpu_timers(current); -} - /* * Stuff for accounting stolen time. */ @@ -375,7 +363,6 @@ static void snapshot_purr(void) #else /* ! CONFIG_VIRT_CPU_ACCOUNTING */ #define calc_cputime_factors() -#define account_process_time(regs) update_process_times(user_mode(regs)) #define calculate_steal_time() do { } while (0) #endif @@ -586,7 +573,7 @@ void timer_interrupt(struct pt_regs * regs) /* not time for this event yet */ now = per_cpu(decrementer_next_tb, cpu) - now; if (now <= DECREMENTER_MAX) - set_dec((unsigned int)now - 1); + set_dec((int)now); return; } old_regs = set_irq_regs(regs); @@ -599,20 +586,8 @@ void timer_interrupt(struct pt_regs * regs) get_lppaca()->int_dword.fields.decr_int = 0; #endif - /* - * We cannot disable the decrementer, so in the period - * between this cpu's being marked offline in cpu_online_map - * and calling stop-self, it is taking timer interrupts. - * Avoid calling into the scheduler rebalancing code if this - * is the case. - */ - if (!cpu_is_offline(cpu)) - account_process_time(regs); - if (evt->event_handler) evt->event_handler(evt); - else - evt->set_next_event(DECREMENTER_MAX, evt); #ifdef CONFIG_PPC_ISERIES if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending()) @@ -836,9 +811,6 @@ static int decrementer_set_next_event(unsigned long evt, struct clock_event_device *dev) { __get_cpu_var(decrementer_next_tb) = get_tb_or_rtc() + evt; - /* The decrementer interrupts on the 0 -> -1 transition */ - if (evt) - --evt; set_dec(evt); return 0; } @@ -871,7 +843,8 @@ void init_decrementer_clockevent(void) decrementer_clockevent.shift); decrementer_clockevent.max_delta_ns = clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent); - decrementer_clockevent.min_delta_ns = 1000; + decrementer_clockevent.min_delta_ns = + clockevent_delta2ns(2, &decrementer_clockevent); register_decrementer_clockevent(cpu); } diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 823a8cbd60b5..f66fa5d966b0 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -37,11 +37,10 @@ SECTIONS ALIGN_FUNCTION(); *(.text.head) _text = .; - TEXT_TEXT + *(.text .fixup .text.init.refok .exit.text.refok) SCHED_TEXT LOCK_TEXT KPROBES_TEXT - *(.fixup) #ifdef CONFIG_PPC32 *(.got1) diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index e067df836be2..3899ea97fbdf 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -98,13 +98,12 @@ unsigned long __init mmu_mapin_ram(void) v = KERNELBASE; p = PPC_MEMSTART; - s = 0; + s = total_lowmem; - if (__map_without_ltlbs) { - return s; - } + if (__map_without_ltlbs) + return 0; - while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) { + while (s >= LARGE_PAGE_SIZE_16M) { pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE; @@ -116,10 +115,10 @@ unsigned long __init mmu_mapin_ram(void) v += LARGE_PAGE_SIZE_16M; p += LARGE_PAGE_SIZE_16M; - s += LARGE_PAGE_SIZE_16M; + s -= LARGE_PAGE_SIZE_16M; } - while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) { + while (s >= LARGE_PAGE_SIZE_4M) { pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE; @@ -128,8 +127,8 @@ unsigned long __init mmu_mapin_ram(void) v += LARGE_PAGE_SIZE_4M; p += LARGE_PAGE_SIZE_4M; - s += LARGE_PAGE_SIZE_4M; + s -= LARGE_PAGE_SIZE_4M; } - return s; + return total_lowmem - s; } diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c index c3df50476539..04dc08798d3d 100644 --- a/arch/powerpc/mm/44x_mmu.c +++ b/arch/powerpc/mm/44x_mmu.c @@ -35,6 +35,7 @@ */ unsigned int tlb_44x_index; /* = 0 */ unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS; +int icache_44x_need_flush; /* * "Pins" a 256MB TLB entry in AS0 for kernel lowmem diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index a18fda361cc0..8135da06e0a4 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -309,7 +309,7 @@ good_area: set_bit(PG_arch_1, &page->flags); } pte_update(ptep, 0, _PAGE_HWEXEC); - _tlbie(address); + _tlbie(address, mm->context.id); pte_unmap_unlock(ptep, ptl); up_read(&mm->mmap_sem); return 0; diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index ad253b959030..e935edd6b72b 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -331,7 +331,7 @@ htab_pte_insert_failure: *****************************************************************************/ /* _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid, - * pte_t *ptep, unsigned long trap, int local) + * pte_t *ptep, unsigned long trap, int local, int ssize) */ /* @@ -557,7 +557,8 @@ htab_inval_old_hpte: mr r4,r31 /* PTE.pte */ li r5,0 /* PTE.hidx */ li r6,MMU_PAGE_64K /* psize */ - ld r7,STK_PARM(r8)(r1) /* local */ + ld r7,STK_PARM(r9)(r1) /* ssize */ + ld r8,STK_PARM(r8)(r1) /* local */ bl .flush_hash_page b htab_insert_pte diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index c78dc912411f..f09730bf3a33 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -51,6 +51,7 @@ #include <asm/cputable.h> #include <asm/sections.h> #include <asm/spu.h> +#include <asm/udbg.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -791,8 +792,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) } if (user_region) { if (psize != get_paca()->context.user_psize) { - get_paca()->context.user_psize = - mm->context.user_psize; + get_paca()->context = mm->context; slb_flush_and_rebolt(); } } else if (get_paca()->vmalloc_sllp != @@ -885,6 +885,9 @@ void hash_preload(struct mm_struct *mm, unsigned long ea, local_irq_restore(flags); } +/* WARNING: This is called from hash_low_64.S, if you change this prototype, + * do not forget to update the assembly call site ! + */ void flush_hash_page(unsigned long va, real_pte_t pte, int psize, int ssize, int local) { diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index c94a64fd3c01..eb3a732e91db 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -61,12 +61,12 @@ extern unsigned long total_lowmem; #define mmu_mapin_ram() (0UL) #elif defined(CONFIG_4xx) -#define flush_HPTE(X, va, pg) _tlbie(va) +#define flush_HPTE(pid, va, pg) _tlbie(va, pid) extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(void); #elif defined(CONFIG_FSL_BOOKE) -#define flush_HPTE(X, va, pg) _tlbie(va) +#define flush_HPTE(pid, va, pg) _tlbie(va, pid) extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(void); extern void adjust_total_lowmem(void); diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index bbd2c512ee05..27922dff8b94 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -25,6 +25,7 @@ #include <asm/smp.h> #include <asm/firmware.h> #include <linux/compiler.h> +#include <asm/udbg.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -148,6 +149,35 @@ void slb_vmalloc_update(void) slb_flush_and_rebolt(); } +/* Helper function to compare esids. There are four cases to handle. + * 1. The system is not 1T segment size capable. Use the GET_ESID compare. + * 2. The system is 1T capable, both addresses are < 1T, use the GET_ESID compare. + * 3. The system is 1T capable, only one of the two addresses is > 1T. This is not a match. + * 4. The system is 1T capable, both addresses are > 1T, use the GET_ESID_1T macro to compare. + */ +static inline int esids_match(unsigned long addr1, unsigned long addr2) +{ + int esid_1t_count; + + /* System is not 1T segment size capable. */ + if (!cpu_has_feature(CPU_FTR_1T_SEGMENT)) + return (GET_ESID(addr1) == GET_ESID(addr2)); + + esid_1t_count = (((addr1 >> SID_SHIFT_1T) != 0) + + ((addr2 >> SID_SHIFT_1T) != 0)); + + /* both addresses are < 1T */ + if (esid_1t_count == 0) + return (GET_ESID(addr1) == GET_ESID(addr2)); + + /* One address < 1T, the other > 1T. Not a match */ + if (esid_1t_count == 1) + return 0; + + /* Both addresses are > 1T. */ + return (GET_ESID_1T(addr1) == GET_ESID_1T(addr2)); +} + /* Flush all user entries from the segment table of the current processor. */ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) { @@ -193,15 +223,14 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) return; slb_allocate(pc); - if (GET_ESID(pc) == GET_ESID(stack)) + if (esids_match(pc,stack)) return; if (is_kernel_addr(stack)) return; slb_allocate(stack); - if ((GET_ESID(pc) == GET_ESID(unmapped_base)) - || (GET_ESID(stack) == GET_ESID(unmapped_base))) + if (esids_match(pc,unmapped_base) || esids_match(stack,unmapped_base)) return; if (is_kernel_addr(unmapped_base)) diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 151fd8b82d63..04f74f9f9ab6 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -158,6 +158,18 @@ static unsigned int iic_get_irq(void) return virq; } +void iic_setup_cpu(void) +{ + out_be64(&__get_cpu_var(iic).regs->prio, 0xff); +} + +u8 iic_get_target_id(int cpu) +{ + return per_cpu(iic, cpu).target_id; +} + +EXPORT_SYMBOL_GPL(iic_get_target_id); + #ifdef CONFIG_SMP /* Use the highest interrupt priorities for IPI */ @@ -166,29 +178,17 @@ static inline int iic_ipi_to_irq(int ipi) return IIC_IRQ_TYPE_IPI + 0xf - ipi; } -void iic_setup_cpu(void) -{ - out_be64(&__get_cpu_var(iic).regs->prio, 0xff); -} - void iic_cause_IPI(int cpu, int mesg) { out_be64(&per_cpu(iic, cpu).regs->generate, (0xf - mesg) << 4); } -u8 iic_get_target_id(int cpu) -{ - return per_cpu(iic, cpu).target_id; -} -EXPORT_SYMBOL_GPL(iic_get_target_id); - struct irq_host *iic_get_irq_host(int node) { return iic_host; } EXPORT_SYMBOL_GPL(iic_get_irq_host); - static irqreturn_t iic_ipi_action(int irq, void *dev_id) { int ipi = (int)(long)dev_id; diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index 1c0acbad7425..e4438456c867 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -44,6 +44,7 @@ #include <asm/rtas.h> #include "interrupt.h" +#include <asm/udbg.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) diff --git a/arch/powerpc/platforms/celleb/setup.c b/arch/powerpc/platforms/celleb/setup.c index 1769d755eff3..ddfb35ae741f 100644 --- a/arch/powerpc/platforms/celleb/setup.c +++ b/arch/powerpc/platforms/celleb/setup.c @@ -49,6 +49,7 @@ #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/irq.h> +#include <asm/time.h> #include <asm/spu_priv1.h> #include <asm/firmware.h> #include <asm/of_platform.h> diff --git a/arch/powerpc/platforms/iseries/irq.h b/arch/powerpc/platforms/iseries/irq.h index 69f1b437fc7b..a1c236074034 100644 --- a/arch/powerpc/platforms/iseries/irq.h +++ b/arch/powerpc/platforms/iseries/irq.h @@ -1,9 +1,13 @@ #ifndef _ISERIES_IRQ_H #define _ISERIES_IRQ_H +#ifdef CONFIG_PCI extern void iSeries_init_IRQ(void); extern int iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, u32); extern void iSeries_activate_IRQs(void); +#else +#define iSeries_init_IRQ NULL +#endif extern unsigned int iSeries_get_irq(void); #endif /* _ISERIES_IRQ_H */ diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 37ae07ee54a9..0877a8834110 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -617,10 +617,6 @@ static void iseries_dedicated_idle(void) } } -#ifndef CONFIG_PCI -void __init iSeries_init_IRQ(void) { } -#endif - static void __iomem *iseries_ioremap(phys_addr_t address, unsigned long size, unsigned long flags) { diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c index d6435b03971f..be06cfd9fa3d 100644 --- a/arch/powerpc/platforms/iseries/vio.c +++ b/arch/powerpc/platforms/iseries/vio.c @@ -523,15 +523,16 @@ static void __init get_viotape_info(struct device_node *vio_root) static int __init iseries_vio_init(void) { struct device_node *vio_root; + int ret = -ENODEV; if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return -ENODEV; + goto out; iommu_vio_init(); vio_root = of_find_node_by_path("/vdevice"); if (!vio_root) - return -ENODEV; + goto out; if (viopath_hostLp == HvLpIndexInvalid) { vio_set_hostlp(); @@ -544,10 +545,11 @@ static int __init iseries_vio_init(void) get_viocd_info(vio_root); get_viotape_info(vio_root); - return 0; + ret = 0; put_node: of_node_put(vio_root); - return -ENODEV; + out: + return ret; } arch_initcall(iseries_vio_init); diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 22322b35a0ff..fb3d636e088b 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -186,6 +186,11 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg); printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg); + if (!dev) { + printk(KERN_WARNING "EEH: no PCI device for this of node\n"); + return n; + } + /* Gather bridge-specific registers */ if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) { rtas_read_config(pdn, PCI_SEC_STATUS, 2, &cfg); @@ -198,7 +203,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) } /* Dump out the PCI-X command and status regs */ - cap = pci_find_capability(pdn->pcidev, PCI_CAP_ID_PCIX); + cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (cap) { rtas_read_config(pdn, cap, 4, &cfg); n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg); @@ -210,7 +215,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) } /* If PCI-E capable, dump PCI-E cap 10, and the AER */ - cap = pci_find_capability(pdn->pcidev, PCI_CAP_ID_EXP); + cap = pci_find_capability(dev, PCI_CAP_ID_EXP); if (cap) { n += scnprintf(buf+n, len-n, "pci-e cap10:\n"); printk(KERN_WARNING @@ -222,7 +227,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg); } - cap = pci_find_ext_capability(pdn->pcidev, PCI_EXT_CAP_ID_ERR); + cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); if (cap) { n += scnprintf(buf+n, len-n, "pci-e AER:\n"); printk(KERN_WARNING @@ -318,7 +323,7 @@ eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs) if (rets[2] == 0) return -1; /* permanently unavailable */ - if (max_wait_msecs <= 0) return -1; + if (max_wait_msecs <= 0) break; mwait = rets[2]; if (mwait <= 0) { diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 15e015ef6865..57e025e84ab4 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -105,17 +105,18 @@ static void eeh_report_error(struct pci_dev *dev, void *userdata) return; rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen); + + /* A driver that needs a reset trumps all others */ + if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; if (*res == PCI_ERS_RESULT_NONE) *res = rc; - if (*res == PCI_ERS_RESULT_DISCONNECT && - rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; } /** * eeh_report_mmio_enabled - tell drivers that MMIO has been enabled * - * Report an EEH error to each device driver, collect up and - * merge the device driver responses. Cumulative response - * passed back in "userdata". + * Tells each device driver that IO ports, MMIO and config space I/O + * are now enabled. Collects up and merges the device driver responses. + * Cumulative response passed back in "userdata". */ static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata) @@ -123,17 +124,16 @@ static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata) enum pci_ers_result rc, *res = userdata; struct pci_driver *driver = dev->driver; - // dev->error_state = pci_channel_mmio_enabled; - if (!driver || !driver->err_handler || !driver->err_handler->mmio_enabled) return; rc = driver->err_handler->mmio_enabled (dev); + + /* A driver that needs a reset trumps all others */ + if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; if (*res == PCI_ERS_RESULT_NONE) *res = rc; - if (*res == PCI_ERS_RESULT_DISCONNECT && - rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; } /** diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c index 8b18a1c40092..b765b7c77b65 100644 --- a/arch/powerpc/platforms/pseries/firmware.c +++ b/arch/powerpc/platforms/pseries/firmware.c @@ -25,6 +25,7 @@ #include <asm/firmware.h> #include <asm/prom.h> +#include <asm/udbg.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index 2793a1b100e6..f15222bbe136 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -171,6 +171,7 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) struct pci_dn *pdn; int hwirq, virq, i, rc; struct msi_desc *entry; + struct msi_msg msg; pdn = get_pdn(pdev); if (!pdn) @@ -213,6 +214,11 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) dev_dbg(&pdev->dev, "rtas_msi: allocated virq %d\n", virq); set_irq_msi(virq, entry); + + /* Read config space back so we can restore after reset */ + read_msi_msg(virq, &msg); + entry->msg = msg; + unmask_msi_irq(virq); } diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index 7c1b27ac7d3c..216c0f5680d2 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -137,6 +137,7 @@ static void i8259_unmask_irq(unsigned int irq_nr) static struct irq_chip i8259_pic = { .typename = " i8259 ", .mask = i8259_mask_irq, + .disable = i8259_mask_irq, .unmask = i8259_unmask_irq, .mask_ack = i8259_mask_and_ack_irq, }; diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c index 9b3baa7317d7..6933f9c73b43 100644 --- a/arch/powerpc/sysdev/mv64x60_pci.c +++ b/arch/powerpc/sysdev/mv64x60_pci.c @@ -24,8 +24,9 @@ #define MV64X60_VAL_LEN_MAX 11 #define MV64X60_PCICFG_CPCI_HOTSWAP 0x68 -static ssize_t mv64x60_hs_reg_read(struct kobject *kobj, char *buf, loff_t off, - size_t count) +static ssize_t mv64x60_hs_reg_read(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { struct pci_dev *phb; u32 v; @@ -44,8 +45,9 @@ static ssize_t mv64x60_hs_reg_read(struct kobject *kobj, char *buf, loff_t off, return sprintf(buf, "0x%08x\n", v); } -static ssize_t mv64x60_hs_reg_write(struct kobject *kobj, char *buf, loff_t off, - size_t count) +static ssize_t mv64x60_hs_reg_write(struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { struct pci_dev *phb; u32 v; diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index fba7ca17a67e..b19bfef2034d 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -244,6 +244,13 @@ syscall_exit_cont: andis. r10,r0,DBCR0_IC@h bnel- load_dbcr0 #endif +#ifdef CONFIG_44x + lis r4,icache_44x_need_flush@ha + lwz r5,icache_44x_need_flush@l(r4) + cmplwi cr0,r5,0 + bne- 2f +1: +#endif /* CONFIG_44x */ stwcx. r0,0,r1 /* to clear the reservation */ lwz r4,_LINK(r1) lwz r5,_CCR(r1) @@ -258,6 +265,12 @@ syscall_exit_cont: mtspr SPRN_SRR1,r8 SYNC RFI +#ifdef CONFIG_44x +2: li r7,0 + iccci r0,r0 + stw r7,icache_44x_need_flush@l(r4) + b 1b +#endif /* CONFIG_44x */ 66: li r3,-ENOSYS b ret_from_syscall @@ -679,6 +692,16 @@ resume_kernel: /* interrupts are hard-disabled at this point */ restore: +#ifdef CONFIG_44x + lis r4,icache_44x_need_flush@ha + lwz r5,icache_44x_need_flush@l(r4) + cmplwi cr0,r5,0 + beq+ 1f + li r6,0 + iccci r0,r0 + stw r6,icache_44x_need_flush@l(r4) +1: +#endif /* CONFIG_44x */ lwz r0,GPR0(r1) lwz r2,GPR2(r1) REST_4GPRS(3, r1) diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index a22e1f4d94c8..e0c850d85c53 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -224,7 +224,16 @@ _GLOBAL(_tlbia) */ _GLOBAL(_tlbie) #if defined(CONFIG_40x) + /* We run the search with interrupts disabled because we have to change + * the PID and I don't want to preempt when that happens. + */ + mfmsr r5 + mfspr r6,SPRN_PID + wrteei 0 + mtspr SPRN_PID,r4 tlbsx. r3, 0, r3 + mtspr SPRN_PID,r6 + wrtee r5 bne 10f sync /* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear. @@ -234,22 +243,21 @@ _GLOBAL(_tlbie) isync 10: #elif defined(CONFIG_44x) - mfspr r4,SPRN_MMUCR - mfspr r5,SPRN_PID /* Get PID */ - rlwimi r4,r5,0,24,31 /* Set TID */ + mfspr r5,SPRN_MMUCR + rlwimi r5,r4,0,24,31 /* Set TID */ /* We have to run the search with interrupts disabled, even critical * and debug interrupts (in fact the only critical exceptions we have * are debug and machine check). Otherwise an interrupt which causes * a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */ - mfmsr r5 + mfmsr r4 lis r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha addi r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l - andc r6,r5,r6 + andc r6,r4,r6 mtmsr r6 - mtspr SPRN_MMUCR,r4 + mtspr SPRN_MMUCR,r5 tlbsx. r3, 0, r3 - mtmsr r5 + mtmsr r4 bne 10f sync /* There are only 64 TLB entries, so r3 < 64, @@ -491,12 +499,21 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) addi r3,r3,L1_CACHE_BYTES bdnz 0b sync +#ifndef CONFIG_44x + /* We don't flush the icache on 44x. Those have a virtual icache + * and we don't have access to the virtual address here (it's + * not the page vaddr but where it's mapped in user space). The + * flushing of the icache on these is handled elsewhere, when + * a change in the address space occurs, before returning to + * user space + */ mtctr r4 1: icbi 0,r6 addi r6,r6,L1_CACHE_BYTES bdnz 1b sync isync +#endif /* CONFIG_44x */ blr /* diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c index 0a0a0487b334..6536a25cfcb8 100644 --- a/arch/ppc/mm/44x_mmu.c +++ b/arch/ppc/mm/44x_mmu.c @@ -61,6 +61,7 @@ extern char etext[], _stext[]; */ unsigned int tlb_44x_index = 0; unsigned int tlb_44x_hwater = 62; +int icache_44x_need_flush; /* * "Pins" a 256MB TLB entry in AS0 for kernel lowmem diff --git a/arch/ppc/mm/4xx_mmu.c b/arch/ppc/mm/4xx_mmu.c index 838e09db71d9..ea785dbaac7c 100644 --- a/arch/ppc/mm/4xx_mmu.c +++ b/arch/ppc/mm/4xx_mmu.c @@ -99,13 +99,12 @@ unsigned long __init mmu_mapin_ram(void) v = KERNELBASE; p = PPC_MEMSTART; - s = 0; + s = total_lowmem; - if (__map_without_ltlbs) { - return s; - } + if (__map_without_ltlbs) + return 0; - while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) { + while (s >= LARGE_PAGE_SIZE_16M) { pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE; @@ -117,10 +116,10 @@ unsigned long __init mmu_mapin_ram(void) v += LARGE_PAGE_SIZE_16M; p += LARGE_PAGE_SIZE_16M; - s += LARGE_PAGE_SIZE_16M; + s -= LARGE_PAGE_SIZE_16M; } - while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) { + while (s >= LARGE_PAGE_SIZE_4M) { pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE; @@ -129,8 +128,8 @@ unsigned long __init mmu_mapin_ram(void) v += LARGE_PAGE_SIZE_4M; p += LARGE_PAGE_SIZE_4M; - s += LARGE_PAGE_SIZE_4M; + s -= LARGE_PAGE_SIZE_4M; } - return s; + return total_lowmem - s; } diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c index 254c23b755e6..36c0e7529edb 100644 --- a/arch/ppc/mm/fault.c +++ b/arch/ppc/mm/fault.c @@ -227,7 +227,7 @@ good_area: set_bit(PG_arch_1, &page->flags); } pte_update(ptep, 0, _PAGE_HWEXEC); - _tlbie(address); + _tlbie(address, mm->context.id); pte_unmap_unlock(ptep, ptl); up_read(&mm->mmap_sem); return 0; diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h index 540f3292b229..f1d4f2109a99 100644 --- a/arch/ppc/mm/mmu_decl.h +++ b/arch/ppc/mm/mmu_decl.h @@ -54,12 +54,12 @@ extern unsigned int num_tlbcam_entries; #define mmu_mapin_ram() (0UL) #elif defined(CONFIG_4xx) -#define flush_HPTE(X, va, pg) _tlbie(va) +#define flush_HPTE(pid, va, pg) _tlbie(va, pid) extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(void); #elif defined(CONFIG_FSL_BOOKE) -#define flush_HPTE(X, va, pg) _tlbie(va) +#define flush_HPTE(pid, va, pg) _tlbie(va, pid) extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(void); extern void adjust_total_lowmem(void); diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index 05d7184d7e14..453643a0eeea 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -236,7 +236,7 @@ ebony_early_serial_map(void) gen550_init(0, &port); /* Purge TLB entry added in head_44x.S for early serial access */ - _tlbie(UART0_IO_BASE); + _tlbie(UART0_IO_BASE, 0); #endif port.membase = ioremap64(PPC440GP_UART1_ADDR, 8); diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c index 4b169610f154..b79ebb8a3e6c 100644 --- a/arch/ppc/platforms/4xx/luan.c +++ b/arch/ppc/platforms/4xx/luan.c @@ -230,9 +230,14 @@ luan_setup_hoses(void) /* Allocate hoses for PCIX1 and PCIX2 */ hose1 = pcibios_alloc_controller(); + if (!hose1) + return; + hose2 = pcibios_alloc_controller(); - if (!hose1 || !hose2) + if (!hose2) { + pcibios_free_controller(hose1); return; + } /* Setup PCIX1 */ hose1->first_busno = 0; diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index fd0f971881d6..28a712cd4800 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -259,7 +259,7 @@ ocotea_early_serial_map(void) gen550_init(0, &port); /* Purge TLB entry added in head_44x.S for early serial access */ - _tlbie(UART0_IO_BASE); + _tlbie(UART0_IO_BASE, 0); #endif port.membase = ioremap64(PPC440GX_UART1_ADDR, 8); diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c index 888c492b4a45..f6a0c6650f33 100644 --- a/arch/ppc/platforms/4xx/taishan.c +++ b/arch/ppc/platforms/4xx/taishan.c @@ -316,7 +316,7 @@ taishan_early_serial_map(void) gen550_init(0, &port); /* Purge TLB entry added in head_44x.S for early serial access */ - _tlbie(UART0_IO_BASE); + _tlbie(UART0_IO_BASE, 0); #endif port.membase = ioremap64(PPC440GX_UART1_ADDR, 8); diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c index 1e5a00a4b5f5..559f27c6aefe 100644 --- a/arch/ppc/syslib/i8259.c +++ b/arch/ppc/syslib/i8259.c @@ -127,6 +127,7 @@ static void i8259_unmask_irq(unsigned int irq_nr) static struct irq_chip i8259_pic = { .typename = " i8259 ", .mask = i8259_mask_irq, + .disable = i8259_mask_irq, .unmask = i8259_unmask_irq, .mask_ack = i8259_mask_and_ack_irq, }; diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c index 15f0d7323535..46588fa94381 100644 --- a/arch/ppc/syslib/m8260_setup.c +++ b/arch/ppc/syslib/m8260_setup.c @@ -25,6 +25,7 @@ #include <asm/machdep.h> #include <asm/bootinfo.h> #include <asm/time.h> +#include <asm/ppc_sys.h> #include "cpm2_pic.h" @@ -61,7 +62,7 @@ m8260_setup_arch(void) #endif identify_ppc_sys_by_name_and_id(BOARD_CHIP_NAME, - in_be32(CPM_MAP_ADDR + CPM_IMMR_OFFSET)); + in_be32((void *)CPM_MAP_ADDR + CPM_IMMR_OFFSET)); m82xx_board_setup(); } @@ -147,12 +148,12 @@ m8260_show_cpuinfo(struct seq_file *m) seq_printf(m, "vendor\t\t: %s\n" "machine\t\t: %s\n" "\n" - "mem size\t\t: 0x%08x\n" - "console baud\t\t: %d\n" + "mem size\t\t: 0x%08lx\n" + "console baud\t\t: %ld\n" "\n" - "core clock\t: %u MHz\n" - "CPM clock\t: %u MHz\n" - "bus clock\t: %u MHz\n", + "core clock\t: %lu MHz\n" + "CPM clock\t: %lu MHz\n" + "bus clock\t: %lu MHz\n", CPUINFO_VENDOR, CPUINFO_MACHINE, bp->bi_memsize, bp->bi_baudrate, bp->bi_intfreq / 1000000, bp->bi_cpmfreq / 1000000, bp->bi_busfreq / 1000000); diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index a963fe81359e..22b800ce2126 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -145,12 +145,8 @@ void account_ticks(u64 time) do_timer(ticks); #endif -#ifdef CONFIG_VIRT_CPU_ACCOUNTING - account_tick_vtime(current); -#else while (ticks--) update_process_times(user_mode(get_irq_regs())); -#endif s390_do_profile(); } diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 84ff78de6bac..c5f05b3fb2c3 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -32,7 +32,7 @@ static DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer); * Update process times based on virtual cpu times stored by entry.S * to the lowcore fields user_timer, system_timer & steal_clock. */ -void account_tick_vtime(struct task_struct *tsk) +void account_process_tick(struct task_struct *tsk, int user_tick) { cputime_t cputime; __u64 timer, clock; @@ -64,12 +64,6 @@ void account_tick_vtime(struct task_struct *tsk) S390_lowcore.steal_clock -= cputime << 12; account_steal_time(tsk, cputime); } - - run_local_timers(); - if (rcu_pending(smp_processor_id())) - rcu_check_callbacks(smp_processor_id(), rcu_user_flag); - scheduler_tick(); - run_posix_cpu_timers(tsk); } /* diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 22a3eb38438b..496d635f89b2 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -211,10 +211,12 @@ config SH_SOLUTION_ENGINE bool "SolutionEngine" select SOLUTION_ENGINE select CPU_HAS_IPR_IRQ - depends on CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750 + depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ + CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ + CPU_SUBTYPE_SH7750R help - Select SolutionEngine if configuring for a Hitachi SH7709 - or SH7750 evaluation board. + Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, + SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. config SH_7206_SOLUTION_ENGINE bool "SolutionEngine7206" @@ -603,7 +605,7 @@ config BOOT_LINK_OFFSET config UBC_WAKEUP bool "Wakeup UBC on startup" - depends on CPU_SH4 + depends on CPU_SH4 && !CPU_SH4A help Selecting this option will wakeup the User Break Controller (UBC) on startup. Although the UBC is left in an awake state when the processor diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index ab2f9f3c354c..722da6851f56 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -124,12 +124,13 @@ config KGDB_NMI config SH_KGDB_CONSOLE bool "Console messages through GDB" - depends on !SERIAL_SH_SCI_CONSOLE + depends on !SERIAL_SH_SCI_CONSOLE && SERIAL_SH_SCI=y select SERIAL_CORE_CONSOLE default n config KGDB_SYSRQ bool "Allow SysRq 'G' to enter KGDB" + depends on MAGIC_SYSRQ default y comment "Serial port setup" diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c index 943f93aa6052..e55c6686b21f 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/irq.c +++ b/arch/sh/boards/renesas/hs7751rvoip/irq.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/irq.h> +#include <linux/interrupt.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/hs7751rvoip.h> diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c index fa5fa3920222..c05625975f2c 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/setup.c +++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c @@ -15,20 +15,6 @@ #include <asm/io.h> #include <asm/machvec.h> -static struct ipr_data hs77501rvoip_ipr_map[] = { -#if defined(CONFIG_HS7751RVOIP_CODEC) - { DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, -#endif -}; - -static void __init hs7751rvoip_init_irq(void) -{ - make_ipr_irq(hs77501rvoip_ipr_map, ARRAY_SIZE(hs77501rvoip_ipr_map)); - - init_hs7751rvoip_IRQ(); -} - static void hs7751rvoip_power_off(void) { ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR); @@ -75,14 +61,13 @@ static int __init hs7751rvoip_cf_init(void) return 0; } +device_initcall(hs7751rvoip_cf_init); /* * Initialize the board */ static void __init hs7751rvoip_setup(char **cmdline_p) { - device_initcall(hs7751rvoip_cf_init); - ctrl_outb(0xf0, PA_OUTPORTR); pm_power_off = hs7751rvoip_power_off; @@ -115,6 +100,6 @@ static struct sh_machine_vector mv_hs7751rvoip __initmv = { .mv_outsw = hs7751rvoip_outsw, .mv_outsl = hs7751rvoip_outsl, - .mv_init_irq = hs7751rvoip_init_irq, + .mv_init_irq = init_hs7751rvoip_IRQ, .mv_ioport_map = hs7751rvoip_ioport_map, }; diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c index 2dce8bd97f90..0d56fd83bcba 100644 --- a/arch/sh/boards/renesas/sh7710voipgw/setup.c +++ b/arch/sh/boards/renesas/sh7710voipgw/setup.c @@ -11,7 +11,6 @@ #include <asm/machvec.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/irq.h> static struct ipr_data sh7710voipgw_ipr_map[] = { { TIMER2_IRQ, TIMER2_IPR_ADDR, TIMER2_IPR_POS, TIMER2_PRIORITY }, diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c index 27da88486f73..9d5bfc77d0de 100644 --- a/arch/sh/boards/se/7206/irq.c +++ b/arch/sh/boards/se/7206/irq.c @@ -9,7 +9,6 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> -#include <linux/irq.h> #include <linux/interrupt.h> #include <asm/se7206.h> diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index d07a3368f546..318bc8a3969c 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -94,6 +94,7 @@ static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; static struct heartbeat_data heartbeat_data = { .bit_pos = heartbeat_bit_pos, .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), + .regsize = 16, }; static struct resource heartbeat_resources[] = { diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index 20f064083cc2..eb97dca5b736 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -16,8 +16,13 @@ #include <asm/machvec.h> #include <asm/se7722.h> #include <asm/io.h> +#include <asm/heartbeat.h> /* Heartbeat */ +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, @@ -29,6 +34,9 @@ static struct resource heartbeat_resources[] = { static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c index 76e53b26a808..0f08ab3b2bec 100644 --- a/arch/sh/boards/se/7780/setup.c +++ b/arch/sh/boards/se/7780/setup.c @@ -14,8 +14,13 @@ #include <asm/machvec.h> #include <asm/se7780.h> #include <asm/io.h> +#include <asm/heartbeat.h> /* Heartbeat */ +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, @@ -27,6 +32,9 @@ static struct resource heartbeat_resources[] = { static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/snapgear/Makefile index 59fc976bfc2f..d2d2f4b6a502 100644 --- a/arch/sh/boards/snapgear/Makefile +++ b/arch/sh/boards/snapgear/Makefile @@ -2,5 +2,4 @@ # Makefile for the SnapGear specific parts of the kernel # -obj-y := setup.o io.o rtc.o - +obj-y := setup.o io.o diff --git a/arch/sh/boards/snapgear/rtc.c b/arch/sh/boards/snapgear/rtc.c deleted file mode 100644 index edb3dd936cbb..000000000000 --- a/arch/sh/boards/snapgear/rtc.c +++ /dev/null @@ -1,309 +0,0 @@ -/****************************************************************************/ -/* - * linux/arch/sh/boards/snapgear/rtc.c -- Secureedge5410 RTC code - * - * Copyright (C) 2002 David McCullough <davidm@snapgear.com> - * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org> - * - * The SecureEdge5410 can have one of 2 real time clocks, the SH - * built in version or the preferred external DS1302. Here we work out - * each to see what we have and then run with it. - */ -/****************************************************************************/ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/time.h> -#include <linux/rtc.h> -#include <linux/mc146818rtc.h> -#include <asm/io.h> - -static int use_ds1302; - -/****************************************************************************/ -/* - * we need to implement a DS1302 driver here that can operate in - * conjunction with the builtin rtc driver which is already quite friendly - */ -/*****************************************************************************/ - -#define RTC_CMD_READ 0x81 /* Read command */ -#define RTC_CMD_WRITE 0x80 /* Write command */ - -#define RTC_ADDR_YEAR 0x06 /* Address of year register */ -#define RTC_ADDR_DAY 0x05 /* Address of day of week register */ -#define RTC_ADDR_MON 0x04 /* Address of month register */ -#define RTC_ADDR_DATE 0x03 /* Address of day of month register */ -#define RTC_ADDR_HOUR 0x02 /* Address of hour register */ -#define RTC_ADDR_MIN 0x01 /* Address of minute register */ -#define RTC_ADDR_SEC 0x00 /* Address of second register */ - -#define RTC_RESET 0x1000 -#define RTC_IODATA 0x0800 -#define RTC_SCLK 0x0400 - -#define set_dirp(x) -#define get_dirp(x) 0 -#define set_dp(x) SECUREEDGE_WRITE_IOPORT(x, 0x1c00) -#define get_dp(x) SECUREEDGE_READ_IOPORT() - -static void ds1302_sendbits(unsigned int val) -{ - int i; - - for (i = 8; (i); i--, val >>= 1) { - set_dp((get_dp() & ~RTC_IODATA) | ((val & 0x1) ? RTC_IODATA : 0)); - set_dp(get_dp() | RTC_SCLK); // clock high - set_dp(get_dp() & ~RTC_SCLK); // clock low - } -} - -static unsigned int ds1302_recvbits(void) -{ - unsigned int val; - int i; - - for (i = 0, val = 0; (i < 8); i++) { - val |= (((get_dp() & RTC_IODATA) ? 1 : 0) << i); - set_dp(get_dp() | RTC_SCLK); // clock high - set_dp(get_dp() & ~RTC_SCLK); // clock low - } - return(val); -} - -static unsigned int ds1302_readbyte(unsigned int addr) -{ - unsigned int val; - unsigned long flags; - - local_irq_save(flags); - set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); - set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); - - set_dp(get_dp() | RTC_RESET); - ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_READ); - set_dirp(get_dirp() & ~RTC_IODATA); - val = ds1302_recvbits(); - set_dp(get_dp() & ~RTC_RESET); - local_irq_restore(flags); - - return(val); -} - -static void ds1302_writebyte(unsigned int addr, unsigned int val) -{ - unsigned long flags; - - local_irq_save(flags); - set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); - set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); - set_dp(get_dp() | RTC_RESET); - ds1302_sendbits(((addr & 0x3f) << 1) | RTC_CMD_WRITE); - ds1302_sendbits(val); - set_dp(get_dp() & ~RTC_RESET); - local_irq_restore(flags); -} - -static void ds1302_reset(void) -{ - unsigned long flags; - /* Hardware dependent reset/init */ - local_irq_save(flags); - set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); - set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); - local_irq_restore(flags); -} - -/*****************************************************************************/ - -static inline int bcd2int(int val) -{ - return((((val & 0xf0) >> 4) * 10) + (val & 0xf)); -} - -static inline int int2bcd(int val) -{ - return(((val / 10) << 4) + (val % 10)); -} - -/*****************************************************************************/ -/* - * Write and Read some RAM in the DS1302, if it works assume it's there - * Otherwise use the SH4 internal RTC - */ - -void snapgear_rtc_gettimeofday(struct timespec *); -int snapgear_rtc_settimeofday(const time_t); - -void __init secureedge5410_rtc_init(void) -{ - unsigned char *test = "snapgear"; - int i; - - ds1302_reset(); - - use_ds1302 = 1; - - for (i = 0; test[i]; i++) - ds1302_writebyte(32 + i, test[i]); - - for (i = 0; test[i]; i++) - if (ds1302_readbyte(32 + i) != test[i]) { - use_ds1302 = 0; - break; - } - - if (use_ds1302) { - rtc_sh_get_time = snapgear_rtc_gettimeofday; - rtc_sh_set_time = snapgear_rtc_settimeofday; - } - - printk("SnapGear RTC: using %s rtc.\n", use_ds1302 ? "ds1302" : "internal"); -} - -/****************************************************************************/ -/* - * our generic interface that chooses the correct code to use - */ - -void snapgear_rtc_gettimeofday(struct timespec *ts) -{ - unsigned int sec, min, hr, day, mon, yr; - - if (!use_ds1302) - return; - - sec = bcd2int(ds1302_readbyte(RTC_ADDR_SEC)); - min = bcd2int(ds1302_readbyte(RTC_ADDR_MIN)); - hr = bcd2int(ds1302_readbyte(RTC_ADDR_HOUR)); - day = bcd2int(ds1302_readbyte(RTC_ADDR_DATE)); - mon = bcd2int(ds1302_readbyte(RTC_ADDR_MON)); - yr = bcd2int(ds1302_readbyte(RTC_ADDR_YEAR)); - -bad_time: - if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 || - hr > 23 || min > 59 || sec > 59) { - printk(KERN_ERR - "SnapGear RTC: invalid value, resetting to 1 Jan 2000\n"); - ds1302_writebyte(RTC_ADDR_MIN, min = 0); - ds1302_writebyte(RTC_ADDR_HOUR, hr = 0); - ds1302_writebyte(RTC_ADDR_DAY, 7); - ds1302_writebyte(RTC_ADDR_DATE, day = 1); - ds1302_writebyte(RTC_ADDR_MON, mon = 1); - ds1302_writebyte(RTC_ADDR_YEAR, yr = 0); - ds1302_writebyte(RTC_ADDR_SEC, sec = 0); - } - - ts->tv_sec = mktime(2000 + yr, mon, day, hr, min, sec); - if (ts->tv_sec < 0) { -#if 0 - printk("BAD TIME %d %d %d %d %d %d\n", yr, mon, day, hr, min, sec); -#endif - yr = 100; - goto bad_time; - } - ts->tv_nsec = 0; -} - -int snapgear_rtc_settimeofday(const time_t secs) -{ - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - unsigned long nowtime; - - if (!use_ds1302) - return 0; - -/* - * This is called direct from the kernel timer handling code. - * It is supposed to synchronize the kernel clock to the RTC. - */ - - nowtime = secs; - - /* STOP RTC */ - ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) | 0x80); - - cmos_minutes = bcd2int(ds1302_readbyte(RTC_ADDR_MIN)); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) < 30) { - ds1302_writebyte(RTC_ADDR_MIN, int2bcd(real_minutes)); - ds1302_writebyte(RTC_ADDR_SEC, int2bcd(real_seconds)); - } else { - printk(KERN_WARNING - "SnapGear RTC: can't update from %d to %d\n", - cmos_minutes, real_minutes); - retval = -1; - } - - /* START RTC */ - ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) & ~0x80); - return(0); -} - -unsigned char secureedge5410_cmos_read(int addr) -{ - unsigned char val = 0; - - if (!use_ds1302) - return(__CMOS_READ(addr, w)); - - switch(addr) { - case RTC_SECONDS: val = ds1302_readbyte(RTC_ADDR_SEC); break; - case RTC_SECONDS_ALARM: break; - case RTC_MINUTES: val = ds1302_readbyte(RTC_ADDR_MIN); break; - case RTC_MINUTES_ALARM: break; - case RTC_HOURS: val = ds1302_readbyte(RTC_ADDR_HOUR); break; - case RTC_HOURS_ALARM: break; - case RTC_DAY_OF_WEEK: val = ds1302_readbyte(RTC_ADDR_DAY); break; - case RTC_DAY_OF_MONTH: val = ds1302_readbyte(RTC_ADDR_DATE); break; - case RTC_MONTH: val = ds1302_readbyte(RTC_ADDR_MON); break; - case RTC_YEAR: val = ds1302_readbyte(RTC_ADDR_YEAR); break; - case RTC_REG_A: /* RTC_FREQ_SELECT */ break; - case RTC_REG_B: /* RTC_CONTROL */ break; - case RTC_REG_C: /* RTC_INTR_FLAGS */ break; - case RTC_REG_D: val = RTC_VRT /* RTC_VALID */; break; - default: break; - } - - return(val); -} - -void secureedge5410_cmos_write(unsigned char val, int addr) -{ - if (!use_ds1302) { - __CMOS_WRITE(val, addr, w); - return; - } - - switch(addr) { - case RTC_SECONDS: ds1302_writebyte(RTC_ADDR_SEC, val); break; - case RTC_SECONDS_ALARM: break; - case RTC_MINUTES: ds1302_writebyte(RTC_ADDR_MIN, val); break; - case RTC_MINUTES_ALARM: break; - case RTC_HOURS: ds1302_writebyte(RTC_ADDR_HOUR, val); break; - case RTC_HOURS_ALARM: break; - case RTC_DAY_OF_WEEK: ds1302_writebyte(RTC_ADDR_DAY, val); break; - case RTC_DAY_OF_MONTH: ds1302_writebyte(RTC_ADDR_DATE, val); break; - case RTC_MONTH: ds1302_writebyte(RTC_ADDR_MON, val); break; - case RTC_YEAR: ds1302_writebyte(RTC_ADDR_YEAR, val); break; - case RTC_REG_A: /* RTC_FREQ_SELECT */ break; - case RTC_REG_B: /* RTC_CONTROL */ break; - case RTC_REG_C: /* RTC_INTR_FLAGS */ break; - case RTC_REG_D: /* RTC_VALID */ break; - default: break; - } -} diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index 2b594f600002..7022483f98e8 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -22,20 +22,15 @@ #include <asm/snapgear.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/rtc.h> #include <asm/cpu/timer.h> -extern void secureedge5410_rtc_init(void); -extern void pcibios_init(void); - -/****************************************************************************/ /* * EraseConfig handling functions */ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) { - volatile char dummy __attribute__((unused)) = * (volatile char *) 0xb8000000; + (void)ctrl_inb(0xb8000000); /* dummy read */ printk("SnapGear: erase switch interrupt!\n"); @@ -76,19 +71,10 @@ static void __init init_snapgear_IRQ(void) } /* - * Initialize the board - */ -static void __init snapgear_setup(char **cmdline_p) -{ - board_time_init = secureedge5410_rtc_init; -} - -/* * The Machine Vector */ static struct sh_machine_vector mv_snapgear __initmv = { .mv_name = "SnapGear SecureEdge5410", - .mv_setup = snapgear_setup, .mv_nr_irqs = 72, .mv_inb = snapgear_inb, diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 4c5ffdcd55b6..1b0f5be01d10 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -39,7 +39,7 @@ KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%8x" \ quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \ - -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_LOAD) \ + -C none -a $(KERNEL_LOAD) -e $(KERNEL_LOAD) \ -n 'Linux-$(KERNELRELEASE)' -d $< $@ $(obj)/uImage: $(obj)/zImage FORCE diff --git a/arch/sh/cchips/hd6446x/Makefile b/arch/sh/cchips/hd6446x/Makefile index a106dd9db986..f7de4076e242 100644 --- a/arch/sh/cchips/hd6446x/Makefile +++ b/arch/sh/cchips/hd6446x/Makefile @@ -1,2 +1,4 @@ obj-$(CONFIG_HD64461) += hd64461.o obj-$(CONFIG_HD64465) += hd64465/ + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/cchips/voyagergx/Makefile b/arch/sh/cchips/voyagergx/Makefile index 085de72fd327..f73963cb3744 100644 --- a/arch/sh/cchips/voyagergx/Makefile +++ b/arch/sh/cchips/voyagergx/Makefile @@ -6,3 +6,4 @@ obj-y := irq.o setup.o obj-$(CONFIG_USB_OHCI_HCD) += consistent.o +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 2f65ac72f48a..fba6b5ba0b3a 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -5,7 +5,6 @@ obj-y += pci.o obj-$(CONFIG_PCI_AUTO) += pci-auto.o -obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += pci-st40.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c deleted file mode 100644 index 0814a5afe9b7..000000000000 --- a/arch/sh/drivers/pci/pci-st40.c +++ /dev/null @@ -1,488 +0,0 @@ -/* - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Support functions for the ST40 PCI hardware. - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <asm/pci.h> -#include <linux/irq.h> -#include <linux/interrupt.h> /* irqreturn_t */ - -#include "pci-st40.h" - -/* This is in P2 of course */ -#define ST40PCI_BASE_ADDRESS (0xb0000000) -#define ST40PCI_MEM_ADDRESS (ST40PCI_BASE_ADDRESS+0x0) -#define ST40PCI_IO_ADDRESS (ST40PCI_BASE_ADDRESS+0x06000000) -#define ST40PCI_REG_ADDRESS (ST40PCI_BASE_ADDRESS+0x07000000) - -#define ST40PCI_REG(x) (ST40PCI_REG_ADDRESS+(ST40PCI_##x)) -#define ST40PCI_REG_INDEXED(reg, index) \ - (ST40PCI_REG(reg##0) + \ - ((ST40PCI_REG(reg##1) - ST40PCI_REG(reg##0))*index)) - -#define ST40PCI_WRITE(reg,val) writel((val),ST40PCI_REG(reg)) -#define ST40PCI_WRITE_SHORT(reg,val) writew((val),ST40PCI_REG(reg)) -#define ST40PCI_WRITE_BYTE(reg,val) writeb((val),ST40PCI_REG(reg)) -#define ST40PCI_WRITE_INDEXED(reg, index, val) \ - writel((val), ST40PCI_REG_INDEXED(reg, index)); - -#define ST40PCI_READ(reg) readl(ST40PCI_REG(reg)) -#define ST40PCI_READ_SHORT(reg) readw(ST40PCI_REG(reg)) -#define ST40PCI_READ_BYTE(reg) readb(ST40PCI_REG(reg)) - -#define ST40PCI_SERR_IRQ 64 -#define ST40PCI_ERR_IRQ 65 - - -/* Macros to extract PLL params */ -#define PLL_MDIV(reg) ( ((unsigned)reg) & 0xff ) -#define PLL_NDIV(reg) ( (((unsigned)reg)>>8) & 0xff ) -#define PLL_PDIV(reg) ( (((unsigned)reg)>>16) & 0x3 ) -#define PLL_SETUP(reg) ( (((unsigned)reg)>>19) & 0x1ff ) - -/* Build up the appropriate settings */ -#define PLL_SET(mdiv,ndiv,pdiv,setup) \ -( ((mdiv)&0xff) | (((ndiv)&0xff)<<8) | (((pdiv)&3)<<16)| (((setup)&0x1ff)<<19)) - -#define PLLPCICR (0xbb040000+0x10) - -#define PLLPCICR_POWERON (1<<28) -#define PLLPCICR_OUT_EN (1<<29) -#define PLLPCICR_LOCKSELECT (1<<30) -#define PLLPCICR_LOCK (1<<31) - - -#define PLL_25MHZ 0x793c8512 -#define PLL_33MHZ PLL_SET(18,88,3,295) - -static void pci_set_rbar_region(unsigned int region, unsigned long localAddr, - unsigned long pciOffset, unsigned long regionSize); - -static __init void SetPCIPLL(void) -{ - { - /* Lets play with the PLL values */ - unsigned long pll1cr1; - unsigned long mdiv, ndiv, pdiv; - unsigned long muxcr; - unsigned int muxcr_ratios[4] = { 8, 16, 21, 1 }; - unsigned int freq; - -#define CLKGENA 0xbb040000 -#define CLKGENA_PLL2_MUXCR CLKGENA + 0x48 - pll1cr1 = ctrl_inl(PLLPCICR); - printk("PLL1CR1 %08lx\n", pll1cr1); - mdiv = PLL_MDIV(pll1cr1); - ndiv = PLL_NDIV(pll1cr1); - pdiv = PLL_PDIV(pll1cr1); - printk("mdiv %02lx ndiv %02lx pdiv %02lx\n", mdiv, ndiv, pdiv); - freq = ((2*27*ndiv)/mdiv) / (1 << pdiv); - printk("PLL freq %dMHz\n", freq); - muxcr = ctrl_inl(CLKGENA_PLL2_MUXCR); - printk("PCI freq %dMhz\n", freq / muxcr_ratios[muxcr & 3]); - } -} - - -struct pci_err { - unsigned mask; - const char *error_string; -}; - -static struct pci_err int_error[]={ - { INT_MNLTDIM,"MNLTDIM: Master non-lock transfer"}, - { INT_TTADI, "TTADI: Illegal byte enable in I/O transfer"}, - { INT_TMTO, "TMTO: Target memory read/write timeout"}, - { INT_MDEI, "MDEI: Master function disable error"}, - { INT_APEDI, "APEDI: Address parity error"}, - { INT_SDI, "SDI: SERR detected"}, - { INT_DPEITW, "DPEITW: Data parity error target write"}, - { INT_PEDITR, "PEDITR: PERR detected"}, - { INT_TADIM, "TADIM: Target abort detected"}, - { INT_MADIM, "MADIM: Master abort detected"}, - { INT_MWPDI, "MWPDI: PERR from target at data write"}, - { INT_MRDPEI, "MRDPEI: Master read data parity error"} -}; -#define NUM_PCI_INT_ERRS ARRAY_SIZE(int_error) - -static struct pci_err aint_error[]={ - { AINT_MBI, "MBI: Master broken"}, - { AINT_TBTOI, "TBTOI: Target bus timeout"}, - { AINT_MBTOI, "MBTOI: Master bus timeout"}, - { AINT_TAI, "TAI: Target abort"}, - { AINT_MAI, "MAI: Master abort"}, - { AINT_RDPEI, "RDPEI: Read data parity"}, - { AINT_WDPE, "WDPE: Write data parity"} -}; - -#define NUM_PCI_AINT_ERRS ARRAY_SIZE(aint_error) - -static void print_pci_errors(unsigned reg,struct pci_err *error,int num_errors) -{ - int i; - - for(i=0;i<num_errors;i++) { - if(reg & error[i].mask) { - printk("%s\n",error[i].error_string); - } - } - -} - - -static char * pci_commands[16]={ - "Int Ack", - "Special Cycle", - "I/O Read", - "I/O Write", - "Reserved", - "Reserved", - "Memory Read", - "Memory Write", - "Reserved", - "Reserved", - "Configuration Read", - "Configuration Write", - "Memory Read Multiple", - "Dual Address Cycle", - "Memory Read Line", - "Memory Write-and-Invalidate" -}; - -static irqreturn_t st40_pci_irq(int irq, void *dev_instance) -{ - unsigned pci_int, pci_air, pci_cir, pci_aint; - static int count=0; - - - pci_int = ST40PCI_READ(INT);pci_aint = ST40PCI_READ(AINT); - pci_cir = ST40PCI_READ(CIR);pci_air = ST40PCI_READ(AIR); - - /* Reset state to stop multiple interrupts */ - ST40PCI_WRITE(INT, ~0); ST40PCI_WRITE(AINT, ~0); - - - if(++count>1) return IRQ_HANDLED; - - printk("** PCI ERROR **\n"); - - if(pci_int) { - printk("** INT register status\n"); - print_pci_errors(pci_int,int_error,NUM_PCI_INT_ERRS); - } - - if(pci_aint) { - printk("** AINT register status\n"); - print_pci_errors(pci_aint,aint_error,NUM_PCI_AINT_ERRS); - } - - printk("** Address and command info\n"); - - printk("** Command %s : Address 0x%x\n", - pci_commands[pci_cir&0xf],pci_air); - - if(pci_cir&CIR_PIOTEM) { - printk("CIR_PIOTEM:PIO transfer error for master\n"); - } - if(pci_cir&CIR_RWTET) { - printk("CIR_RWTET:Read/Write transfer error for target\n"); - } - - return IRQ_HANDLED; -} - - -/* Rounds a number UP to the nearest power of two. Used for - * sizing the PCI window. - */ -static u32 r2p2(u32 num) -{ - int i = 31; - u32 tmp = num; - - if (num == 0) - return 0; - - do { - if (tmp & (1 << 31)) - break; - i--; - tmp <<= 1; - } while (i >= 0); - - tmp = 1 << i; - /* If the original number isn't a power of 2, round it up */ - if (tmp != num) - tmp <<= 1; - - return tmp; -} - -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - printk("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - -int __init st40pci_init(unsigned memStart, unsigned memSize) -{ - u32 lsr0; - - SetPCIPLL(); - - /* Initialises the ST40 pci subsystem, performing a reset, then programming - * up the address space decoders appropriately - */ - - /* Should reset core here as well methink */ - - ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_SOFT_RESET); - - /* Loop while core resets */ - while (ST40PCI_READ(CR) & CR_SOFT_RESET); - - /* Switch off interrupts */ - ST40PCI_WRITE(INTM, 0); - ST40PCI_WRITE(AINT, 0); - - /* Now, lets reset all the cards on the bus with extreme prejudice */ - ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_RSTCTL); - udelay(250); - - /* Set bus active, take it out of reset */ - ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_BMAM | CR_CFINT | CR_PFCS | CR_PFE); - - /* The PCI spec says that no access must be made to the bus until 1 second - * after reset. This seem ludicrously long, but some delay is needed here - */ - mdelay(1000); - - /* Switch off interrupts */ - ST40PCI_WRITE(INTM, 0); - ST40PCI_WRITE(AINT, 0); - - /* Allow it to be a master */ - - ST40PCI_WRITE_SHORT(CSR_CMD, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | - PCI_COMMAND_IO); - - /* Access to the 0xb0000000 -> 0xb6000000 area will go through to 0x10000000 -> 0x16000000 - * on the PCI bus. This allows a nice 1-1 bus to phys mapping. - */ - - - ST40PCI_WRITE(MBR, 0x10000000); - /* Always set the max size 128M (actually, it is only 96MB wide) */ - ST40PCI_WRITE(MBMR, 0x07ff0000); - - /* I/O addresses are mapped at 0xb6000000 -> 0xb7000000. These are changed to 0, to - * allow cards that have legacy io such as vga to function correctly. This gives a - * maximum of 64K of io/space as only the bottom 16 bits of the address are copied - * over to the bus when the transaction is made. 64K of io space is more than enough - */ - ST40PCI_WRITE(IOBR, 0x0); - /* Set up the 64K window */ - ST40PCI_WRITE(IOBMR, 0x0); - - /* Now we set up the mbars so the PCI bus can see the local memory */ - /* Expose a 256M window starting at PCI address 0... */ - ST40PCI_WRITE(CSR_MBAR0, 0); - ST40PCI_WRITE(LSR0, 0x0fff0001); - - /* ... and set up the initial incoming window to expose all of RAM */ - pci_set_rbar_region(7, memStart, memStart, memSize); - - /* Maximise timeout values */ - ST40PCI_WRITE_BYTE(CSR_TRDY, 0xff); - ST40PCI_WRITE_BYTE(CSR_RETRY, 0xff); - ST40PCI_WRITE_BYTE(CSR_MIT, 0xff); - - ST40PCI_WRITE_BYTE(PERF,PERF_MASTER_WRITE_POSTING); - - return 1; -} - -char * __devinit pcibios_setup(char *str) -{ - return str; -} - - -#define SET_CONFIG_BITS(bus,devfn,where)\ - (((bus) << 16) | ((devfn) << 8) | ((where) & ~3) | (bus!=0)) - -#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where) - - -static int CheckForMasterAbort(void) -{ - if (ST40PCI_READ(INT) & INT_MADIM) { - /* Should we clear config space version as well ??? */ - ST40PCI_WRITE(INT, INT_MADIM); - ST40PCI_WRITE_SHORT(CSR_STATUS, 0); - return 1; - } - - return 0; -} - -/* Write to config register */ -static int st40pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) -{ - ST40PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - switch (size) { - case 1: - *val = (u8)ST40PCI_READ_BYTE(PDR + (where & 3)); - break; - case 2: - *val = (u16)ST40PCI_READ_SHORT(PDR + (where & 2)); - break; - case 4: - *val = ST40PCI_READ(PDR); - break; - } - - if (CheckForMasterAbort()){ - switch (size) { - case 1: - *val = (u8)0xff; - break; - case 2: - *val = (u16)0xffff; - break; - case 4: - *val = 0xffffffff; - break; - } - } - - return PCIBIOS_SUCCESSFUL; -} - -static int st40pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) -{ - ST40PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - - switch (size) { - case 1: - ST40PCI_WRITE_BYTE(PDR + (where & 3), (u8)val); - break; - case 2: - ST40PCI_WRITE_SHORT(PDR + (where & 2), (u16)val); - break; - case 4: - ST40PCI_WRITE(PDR, val); - break; - } - - CheckForMasterAbort(); - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops st40pci_config_ops = { - .read = st40pci_read, - .write = st40pci_write, -}; - - -/* Everything hangs off this */ -static struct pci_bus *pci_root_bus; - -static int __init pcibios_init(void) -{ - extern unsigned long memory_start, memory_end; - - printk(KERN_ALERT "pci-st40.c: pcibios_init\n"); - - if (sh_mv.mv_init_pci != NULL) { - sh_mv.mv_init_pci(); - } - - /* The pci subsytem needs to know where memory is and how much - * of it there is. I've simply made these globals. A better mechanism - * is probably needed. - */ - st40pci_init(PHYSADDR(memory_start), - PHYSADDR(memory_end) - PHYSADDR(memory_start)); - - if (request_irq(ST40PCI_ERR_IRQ, st40_pci_irq, - IRQF_DISABLED, "st40pci", NULL)) { - printk(KERN_ERR "st40pci: Cannot hook interrupt\n"); - return -EIO; - } - - /* Enable the PCI interrupts on the device */ - ST40PCI_WRITE(INTM, ~0); - ST40PCI_WRITE(AINT, ~0); - - /* Map the io address apprioately */ -#ifdef CONFIG_HD64465 - hd64465_port_map(PCIBIOS_MIN_IO, (64 * 1024) - PCIBIOS_MIN_IO + 1, - ST40_IO_ADDR + PCIBIOS_MIN_IO, 0); -#endif - - /* ok, do the scan man */ - pci_root_bus = pci_scan_bus(0, &st40pci_config_ops, NULL); - pci_assign_unassigned_resources(); - - return 0; -} -subsys_initcall(pcibios_init); - -/* - * Publish a region of local address space over the PCI bus - * to other devices. - */ -static void pci_set_rbar_region(unsigned int region, unsigned long localAddr, - unsigned long pciOffset, unsigned long regionSize) -{ - unsigned long mask; - - if (region > 7) - return; - - if (regionSize > (512 * 1024 * 1024)) - return; - - mask = r2p2(regionSize) - 0x10000; - - /* Disable the region (in case currently in use, should never happen) */ - ST40PCI_WRITE_INDEXED(RSR, region, 0); - - /* Start of local address space to publish */ - ST40PCI_WRITE_INDEXED(RLAR, region, PHYSADDR(localAddr) ); - - /* Start of region in PCI address space as an offset from MBAR0 */ - ST40PCI_WRITE_INDEXED(RBAR, region, pciOffset); - - /* Size of region */ - ST40PCI_WRITE_INDEXED(RSR, region, mask | 1); -} - diff --git a/arch/sh/drivers/pci/pci-st40.h b/arch/sh/drivers/pci/pci-st40.h deleted file mode 100644 index cf0d35bd135c..000000000000 --- a/arch/sh/drivers/pci/pci-st40.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Definitions for the ST40 PCI hardware. - */ - -#ifndef __PCI_ST40_H__ -#define __PCI_ST40_H__ - -#define ST40PCI_VCR_STATUS 0x00 - -#define ST40PCI_VCR_VERSION 0x08 - -#define ST40PCI_CR 0x10 - -#define CR_SOFT_RESET (1<<12) -#define CR_PFCS (1<<11) -#define CR_PFE (1<<9) -#define CR_BMAM (1<<6) -#define CR_HOST (1<<5) -#define CR_CLKEN (1<<4) -#define CR_SOCS (1<<3) -#define CR_IOCS (1<<2) -#define CR_RSTCTL (1<<1) -#define CR_CFINT (1<<0) -#define CR_LOCK_MASK 0x5a000000 - - -#define ST40PCI_LSR0 0X14 -#define ST40PCI_LAR0 0x1c - -#define ST40PCI_INT 0x24 -#define INT_MNLTDIM (1<<15) -#define INT_TTADI (1<<14) -#define INT_TMTO (1<<9) -#define INT_MDEI (1<<8) -#define INT_APEDI (1<<7) -#define INT_SDI (1<<6) -#define INT_DPEITW (1<<5) -#define INT_PEDITR (1<<4) -#define INT_TADIM (1<<3) -#define INT_MADIM (1<<2) -#define INT_MWPDI (1<<1) -#define INT_MRDPEI (1<<0) - - -#define ST40PCI_INTM 0x28 -#define ST40PCI_AIR 0x2c - -#define ST40PCI_CIR 0x30 -#define CIR_PIOTEM (1<<31) -#define CIR_RWTET (1<<26) - -#define ST40PCI_AINT 0x40 -#define AINT_MBI (1<<13) -#define AINT_TBTOI (1<<12) -#define AINT_MBTOI (1<<11) -#define AINT_TAI (1<<3) -#define AINT_MAI (1<<2) -#define AINT_RDPEI (1<<1) -#define AINT_WDPE (1<<0) - -#define ST40PCI_AINTM 0x44 -#define ST40PCI_BMIR 0x48 -#define ST40PCI_PAR 0x4c -#define ST40PCI_MBR 0x50 -#define ST40PCI_IOBR 0x54 -#define ST40PCI_PINT 0x58 -#define ST40PCI_PINTM 0x5c -#define ST40PCI_MBMR 0x70 -#define ST40PCI_IOBMR 0x74 -#define ST40PCI_PDR 0x78 - -/* H8 specific registers start here */ -#define ST40PCI_WCBAR 0x7c -#define ST40PCI_LOCCFG_UNLOCK 0x34 - -#define ST40PCI_RBAR0 0x100 -#define ST40PCI_RSR0 0x104 -#define ST40PCI_RLAR0 0x108 - -#define ST40PCI_RBAR1 0x110 -#define ST40PCI_RSR1 0x114 -#define ST40PCI_RLAR1 0x118 - - -#define ST40PCI_RBAR2 0x120 -#define ST40PCI_RSR2 0x124 -#define ST40PCI_RLAR2 0x128 - -#define ST40PCI_RBAR3 0x130 -#define ST40PCI_RSR3 0x134 -#define ST40PCI_RLAR3 0x138 - -#define ST40PCI_RBAR4 0x140 -#define ST40PCI_RSR4 0x144 -#define ST40PCI_RLAR4 0x148 - -#define ST40PCI_RBAR5 0x150 -#define ST40PCI_RSR5 0x154 -#define ST40PCI_RLAR5 0x158 - -#define ST40PCI_RBAR6 0x160 -#define ST40PCI_RSR6 0x164 -#define ST40PCI_RLAR6 0x168 - -#define ST40PCI_RBAR7 0x170 -#define ST40PCI_RSR7 0x174 -#define ST40PCI_RLAR7 0x178 - - -#define ST40PCI_RBAR(n) (0x100+(0x10*(n))) -#define ST40PCI_RSR(n) (0x104+(0x10*(n))) -#define ST40PCI_RLAR(n) (0x108+(0x10*(n))) - -#define ST40PCI_PERF 0x80 -#define PERF_MASTER_WRITE_POSTING (1<<4) -/* H8 specific registers end here */ - - -/* These are configs space registers */ -#define ST40PCI_CSR_VID 0x10000 -#define ST40PCI_CSR_DID 0x10002 -#define ST40PCI_CSR_CMD 0x10004 -#define ST40PCI_CSR_STATUS 0x10006 -#define ST40PCI_CSR_MBAR0 0x10010 -#define ST40PCI_CSR_TRDY 0x10040 -#define ST40PCI_CSR_RETRY 0x10041 -#define ST40PCI_CSR_MIT 0x1000d - -#define ST40_IO_ADDR 0xb6000000 - -#endif /* __PCI_ST40_H__ */ diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 1f141a8ba17c..4b81d9c47b00 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -10,7 +10,6 @@ obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process.o ptrace.o \ obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ - obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_CF_ENABLER) += cf-enabler.o obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o @@ -22,3 +21,5 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_STACKTRACE) += stacktrace.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S index 2b2a9e02fb75..b6abf38d3a8d 100644 --- a/arch/sh/kernel/cpu/sh3/ex.S +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -46,7 +46,7 @@ ENTRY(exception_handling_table) .long exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/ ENTRY(nmi_slot) #if defined (CONFIG_KGDB_NMI) - .long debug_enter /* 1C0 */ ! Allow trap to debugger + .long kgdb_handle_exception /* 1C0 */ ! Allow trap to debugger #else .long exception_none /* 1C0 */ ! Not implemented yet #endif diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index 21375d777e99..bc9c28a69bf1 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -139,14 +139,6 @@ int __init detect_cpu_and_cache_system(void) boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | CPU_HAS_LLSC; break; - case 0x8000: - boot_cpu_data.type = CPU_ST40RA; - boot_cpu_data.flags |= CPU_HAS_FPU; - break; - case 0x8100: - boot_cpu_data.type = CPU_ST40GX1; - boot_cpu_data.flags |= CPU_HAS_FPU; - break; case 0x700: boot_cpu_data.type = CPU_SH4_501; boot_cpu_data.icache.ways = 2; diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 348da194ec99..0586bc62ad96 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/kernel_stat.h> #include <linux/seq_file.h> -#include <linux/irq.h> #include <asm/processor.h> #include <asm/machvec.h> #include <asm/uaccess.h> diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index 2fdc700dfd6e..d453c3a1c79f 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -102,6 +102,7 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> +#include <linux/module.h> #include <asm/system.h> #include <asm/cacheflush.h> #include <asm/current.h> @@ -116,7 +117,9 @@ kgdb_debug_hook_t *kgdb_debug_hook; kgdb_bus_error_hook_t *kgdb_bus_err_hook; int (*kgdb_getchar)(void); +EXPORT_SYMBOL_GPL(kgdb_getchar); void (*kgdb_putchar)(int); +EXPORT_SYMBOL_GPL(kgdb_putchar); static void put_debug_char(int c) { @@ -136,7 +139,7 @@ static int get_debug_char(void) #define NUMREGBYTES (MAXREG*4) #define OUTBUFMAX (NUMREGBYTES*2+512) -enum regs { +enum { R0 = 0, R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, PC, PR, GBR, VBR, MACH, MACL, SR, @@ -176,9 +179,13 @@ int kgdb_nofault; /* Boolean to ignore bus errs (i.e. in GDB) */ /* SCI/UART settings, used in kgdb_console_setup() */ int kgdb_portnum = CONFIG_KGDB_DEFPORT; +EXPORT_SYMBOL_GPL(kgdb_portnum); int kgdb_baud = CONFIG_KGDB_DEFBAUD; +EXPORT_SYMBOL_GPL(kgdb_baud); char kgdb_parity = CONFIG_KGDB_DEFPARITY; +EXPORT_SYMBOL_GPL(kgdb_parity); char kgdb_bits = CONFIG_KGDB_DEFBITS; +EXPORT_SYMBOL_GPL(kgdb_bits); /* Jump buffer for setjmp/longjmp */ static jmp_buf rem_com_env; diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 0b8c45d53a47..4156aac8c27d 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -303,7 +303,6 @@ static const char *cpu_name[] = { [CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760", - [CPU_ST40RA] = "ST40RA", [CPU_ST40GX1] = "ST40GX1", [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index 548e4285b375..e1a6de9088b5 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -106,7 +106,6 @@ DECLARE_EXPORT(__movmem); DECLARE_EXPORT(__movstr); #endif -#ifdef CONFIG_CPU_SH4 #if __GNUC__ == 4 DECLARE_EXPORT(__movmem_i4_even); DECLARE_EXPORT(__movmem_i4_odd); @@ -126,7 +125,6 @@ DECLARE_EXPORT(__movstr_i4_even); DECLARE_EXPORT(__movstr_i4_odd); DECLARE_EXPORT(__movstrSI12_i4); #endif /* __GNUC__ == 4 */ -#endif #if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \ defined(CONFIG_SH7705_CACHE_32KB)) diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile index e23dd1a3fccd..9dc7b6985052 100644 --- a/arch/sh/lib/Makefile +++ b/arch/sh/lib/Makefile @@ -9,3 +9,5 @@ memcpy-y := memcpy.o memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o lib-y += $(memcpy-y) + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index cf446bbab5b0..1265f204f7d1 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -17,7 +17,7 @@ config CPU_SH4 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB - select CPU_HAS_PTEA if (!CPU_SUBTYPE_ST40 && !CPU_SH4A) || CPU_SHX2 + select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2 select CPU_HAS_FPU if !CPU_SH4AL_DSP config CPU_SH4A @@ -29,10 +29,6 @@ config CPU_SH4AL_DSP select CPU_SH4A select CPU_HAS_DSP -config CPU_SUBTYPE_ST40 - bool - select CPU_SH4 - config CPU_SHX2 bool @@ -152,21 +148,6 @@ config CPU_SUBTYPE_SH4_202 bool "Support SH4-202 processor" select CPU_SH4 -# ST40 Processor Support - -config CPU_SUBTYPE_ST40STB1 - bool "Support ST40STB1/ST40RA processors" - select CPU_SUBTYPE_ST40 - help - Select ST40STB1 if you have a ST40RA CPU. - This was previously called the ST40STB1, hence the option name. - -config CPU_SUBTYPE_ST40GX1 - bool "Support ST40GX1 processor" - select CPU_SUBTYPE_ST40 - help - Select ST40GX1 if you have a ST40GX1 CPU. - # SH-4A Processor Support config CPU_SUBTYPE_SH7770 diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile index ee30fb44dfe1..aa44607f072d 100644 --- a/arch/sh/mm/Makefile +++ b/arch/sh/mm/Makefile @@ -33,3 +33,5 @@ endif obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_32BIT) += pmb.o obj-$(CONFIG_NUMA) += numa.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/mm/clear_page.S b/arch/sh/mm/clear_page.S index 8a706131e521..7a7c81ee3f01 100644 --- a/arch/sh/mm/clear_page.S +++ b/arch/sh/mm/clear_page.S @@ -150,48 +150,3 @@ ENTRY(__clear_user) .long 8b, .Lbad_clear_user .long 9b, .Lbad_clear_user .previous - -#if defined(CONFIG_CPU_SH4) -/* - * __clear_user_page - * @to: P3 address (with same color) - * @orig_to: P1 address - * - * void __clear_user_page(void *to, void *orig_to) - */ - -/* - * r0 --- scratch - * r4 --- to - * r5 --- orig_to - * r6 --- to + PAGE_SIZE - */ -ENTRY(__clear_user_page) - mov.l .Lpsz,r0 - mov r4,r6 - add r0,r6 - mov #0,r0 - ! -1: ocbi @r5 - add #32,r5 - movca.l r0,@r4 - mov r4,r1 - add #32,r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - mov.l r0,@-r4 - add #28,r4 - cmp/eq r6,r4 - bf/s 1b - ocbwb @r1 - ! - rts - nop -.Lpsz: .long PAGE_SIZE - -#endif - diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S index 3d8409daa4be..40685018b952 100644 --- a/arch/sh/mm/copy_page.S +++ b/arch/sh/mm/copy_page.S @@ -68,67 +68,6 @@ ENTRY(copy_page_slow) rts nop -#if defined(CONFIG_CPU_SH4) -/* - * __copy_user_page - * @to: P1 address (with same color) - * @from: P1 address - * @orig_to: P1 address - * - * void __copy_user_page(void *to, void *from, void *orig_to) - */ - -/* - * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch - * r8 --- from + PAGE_SIZE - * r9 --- orig_to - * r10 --- to - * r11 --- from - */ -ENTRY(__copy_user_page) - mov.l r8,@-r15 - mov.l r9,@-r15 - mov.l r10,@-r15 - mov.l r11,@-r15 - mov r4,r10 - mov r5,r11 - mov r6,r9 - mov r5,r8 - mov.l .Lpsz,r0 - add r0,r8 - ! -1: ocbi @r9 - add #32,r9 - mov.l @r11+,r0 - mov.l @r11+,r1 - mov.l @r11+,r2 - mov.l @r11+,r3 - mov.l @r11+,r4 - mov.l @r11+,r5 - mov.l @r11+,r6 - mov.l @r11+,r7 - movca.l r0,@r10 - mov r10,r0 - add #32,r10 - mov.l r7,@-r10 - mov.l r6,@-r10 - mov.l r5,@-r10 - mov.l r4,@-r10 - mov.l r3,@-r10 - mov.l r2,@-r10 - mov.l r1,@-r10 - ocbwb @r0 - cmp/eq r11,r8 - bf/s 1b - add #28,r10 - ! - mov.l @r15+,r11 - mov.l @r15+,r10 - mov.l @r15+,r9 - mov.l @r15+,r8 - rts - nop -#endif .align 2 .Lpsz: .long PAGE_SIZE /* diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 25f5c6f6821d..8c7a9ca79879 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -9,6 +9,8 @@ #include <linux/mm.h> #include <linux/mutex.h> #include <linux/fs.h> +#include <linux/highmem.h> +#include <linux/module.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> @@ -50,34 +52,61 @@ static inline void kunmap_coherent(struct page *page) void clear_user_page(void *to, unsigned long address, struct page *page) { __set_bit(PG_mapped, &page->flags); - if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) - clear_page(to); - else { - void *vto = kmap_coherent(page, address); - __clear_user_page(vto, to); - kunmap_coherent(vto); - } + + clear_page(to); + if ((((address & PAGE_MASK) ^ (unsigned long)to) & CACHE_ALIAS)) + __flush_wback_region(to, PAGE_SIZE); } -/* - * copy_user_page - * @to: P1 address - * @from: P1 address - * @address: U0 address to be mapped - * @page: page (virt_to_page(to)) - */ -void copy_user_page(void *to, void *from, unsigned long address, - struct page *page) +void copy_to_user_page(struct vm_area_struct *vma, struct page *page, + unsigned long vaddr, void *dst, const void *src, + unsigned long len) { + void *vto; + __set_bit(PG_mapped, &page->flags); - if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) - copy_page(to, from); - else { - void *vfrom = kmap_coherent(page, address); - __copy_user_page(vfrom, from, to); - kunmap_coherent(vfrom); - } + + vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(vto, src, len); + kunmap_coherent(vto); + + if (vma->vm_flags & VM_EXEC) + flush_cache_page(vma, vaddr, page_to_pfn(page)); +} + +void copy_from_user_page(struct vm_area_struct *vma, struct page *page, + unsigned long vaddr, void *dst, const void *src, + unsigned long len) +{ + void *vfrom; + + __set_bit(PG_mapped, &page->flags); + + vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(dst, vfrom, len); + kunmap_coherent(vfrom); +} + +void copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma) +{ + void *vfrom, *vto; + + __set_bit(PG_mapped, &to->flags); + + vto = kmap_atomic(to, KM_USER1); + vfrom = kmap_coherent(from, vaddr); + copy_page(vto, vfrom); + kunmap_coherent(vfrom); + + if (((vaddr ^ (unsigned long)vto) & CACHE_ALIAS)) + __flush_wback_region(vto, PAGE_SIZE); + + kunmap_atomic(vto, KM_USER1); + /* Make sure this page is cleared on other CPU's too before using it */ + smp_wmb(); } +EXPORT_SYMBOL(copy_user_highpage); /* * For SH-4, we have our own implementation for ptep_get_and_clear diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile index 1f25d9bb7538..2efc2e79fd29 100644 --- a/arch/sh/oprofile/Makefile +++ b/arch/sh/oprofile/Makefile @@ -15,3 +15,4 @@ profdrvr-$(CONFIG_CPU_SUBTYPE_SH7091) := op_model_sh7750.o oprofile-y := $(DRIVER_OBJS) $(profdrvr-y) +EXTRA_CFLAGS += -Werror diff --git a/arch/sh64/kernel/process.c b/arch/sh64/kernel/process.c index ceb9458abda4..0761af4d2a42 100644 --- a/arch/sh64/kernel/process.c +++ b/arch/sh64/kernel/process.c @@ -26,6 +26,7 @@ #include <linux/reboot.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/proc_fs.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -656,9 +657,6 @@ unsigned long get_wchan(struct task_struct *p) */ #if defined(CONFIG_SH64_PROC_ASIDS) -#include <linux/init.h> -#include <linux/proc_fs.h> - static int asids_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, void *data) { @@ -686,10 +684,8 @@ asids_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, void static int __init register_proc_asids(void) { - create_proc_read_entry("asids", 0, NULL, asids_proc_info, NULL); - return 0; + create_proc_read_entry("asids", 0, NULL, asids_proc_info, NULL); + return 0; } - __initcall(register_proc_asids); #endif - diff --git a/arch/sh64/kernel/traps.c b/arch/sh64/kernel/traps.c index c03101fab467..f32df3831f45 100644 --- a/arch/sh64/kernel/traps.c +++ b/arch/sh64/kernel/traps.c @@ -30,7 +30,6 @@ #include <linux/interrupt.h> #include <linux/sysctl.h> #include <linux/module.h> - #include <asm/system.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -242,9 +241,6 @@ DO_ERROR(12, SIGILL, "reserved instruction", reserved_inst, current) #endif /* CONFIG_SH64_ID2815_WORKAROUND */ - -#include <asm/system.h> - /* Called with interrupts disabled */ asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs) { @@ -984,4 +980,3 @@ asmlinkage void do_debug_interrupt(unsigned long code, struct pt_regs *regs) /* Clear all DEBUGINT causes */ poke_real_address_q(DM_EXP_CAUSE_PHY, 0x0); } - diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c index e1e24f31aa54..01a6756ba371 100644 --- a/arch/sparc/kernel/irq.c +++ b/arch/sparc/kernel/irq.c @@ -18,7 +18,6 @@ #include <linux/linkage.h> #include <linux/kernel_stat.h> #include <linux/signal.h> -#include <linux/sched.h> #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/random.h> diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c index 9f472a79d37e..eeb5a2fc788d 100644 --- a/arch/sparc64/kernel/ds.c +++ b/arch/sparc64/kernel/ds.c @@ -6,7 +6,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/types.h> -#include <linux/module.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/sched.h> diff --git a/arch/sparc64/kernel/module.c b/arch/sparc64/kernel/module.c index 579871527699..158484bf5999 100644 --- a/arch/sparc64/kernel/module.c +++ b/arch/sparc64/kernel/module.c @@ -11,7 +11,6 @@ #include <linux/fs.h> #include <linux/string.h> #include <linux/slab.h> -#include <linux/vmalloc.h> #include <linux/mm.h> #include <asm/processor.h> diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index 78caff926737..98c468803ce3 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -51,7 +51,6 @@ #include <linux/vfs.h> #include <linux/netfilter_ipv4/ip_tables.h> #include <linux/ptrace.h> -#include <linux/highuid.h> #include <asm/types.h> #include <asm/uaccess.h> diff --git a/arch/sparc64/kernel/sys_sunos32.c b/arch/sparc64/kernel/sys_sunos32.c index 170d6ca8de6f..cfc22d3fe54c 100644 --- a/arch/sparc64/kernel/sys_sunos32.c +++ b/arch/sparc64/kernel/sys_sunos32.c @@ -57,7 +57,6 @@ #include <linux/personality.h> /* For SOCKET_I */ -#include <linux/socket.h> #include <net/sock.h> #include <net/compat.h> diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index a2cf955294c1..4352ee4d8dac 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -28,7 +28,6 @@ #include <linux/jiffies.h> #include <linux/cpufreq.h> #include <linux/percpu.h> -#include <linux/profile.h> #include <linux/miscdevice.h> #include <linux/rtc.h> #include <linux/kernel_stat.h> @@ -47,7 +46,6 @@ #include <asm/sections.h> #include <asm/cpudata.h> #include <asm/uaccess.h> -#include <asm/prom.h> #include <asm/irq_regs.h> DEFINE_SPINLOCK(mostek_lock); diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 18b231810908..df588f0f76e1 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -159,20 +159,16 @@ sysenter_do_call: sysenter_tracesys: CFI_RESTORE_STATE + xchgl %r9d,%ebp SAVE_REST CLEAR_RREGS + movq %r9,R9(%rsp) movq $-ENOSYS,RAX(%rsp) /* really needed? */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ RESTORE_REST - movl %ebp, %ebp - /* no need to do an access_ok check here because rbp has been - 32bit zero extended */ -1: movl (%rbp),%r9d - .section __ex_table,"a" - .quad 1b,ia32_badarg - .previous + xchgl %ebp,%r9d jmp sysenter_do_call CFI_ENDPROC ENDPROC(ia32_sysenter_target) @@ -262,20 +258,17 @@ cstar_do_call: cstar_tracesys: CFI_RESTORE_STATE + xchgl %r9d,%ebp SAVE_REST CLEAR_RREGS + movq %r9,R9(%rsp) movq $-ENOSYS,RAX(%rsp) /* really needed? */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ RESTORE_REST + xchgl %ebp,%r9d movl RSP-ARGOFFSET(%rsp), %r8d - /* no need to do an access_ok check here because r8 has been - 32bit zero extended */ -1: movl (%r8),%r9d - .section __ex_table,"a" - .quad 1b,ia32_badarg - .previous jmp cstar_do_call END(ia32_cstar_target) diff --git a/arch/x86/ia32/ptrace32.c b/arch/x86/ia32/ptrace32.c index f52770ef0ee3..4a233ad6269c 100644 --- a/arch/x86/ia32/ptrace32.c +++ b/arch/x86/ia32/ptrace32.c @@ -228,8 +228,6 @@ static long ptrace32_siginfo(unsigned request, u32 pid, u32 addr, u32 data) return ret; } -#define COMPAT_GDT_ENTRY_TLS_MIN 6 - asmlinkage long sys32_ptrace(long request, u32 pid, u32 addr, u32 data) { struct task_struct *child; @@ -248,6 +246,8 @@ asmlinkage long sys32_ptrace(long request, u32 pid, u32 addr, u32 data) case PTRACE_SYSCALL: case PTRACE_OLDSETOPTIONS: case PTRACE_SETOPTIONS: + case PTRACE_SET_THREAD_AREA: + case PTRACE_GET_THREAD_AREA: return sys_ptrace(request, pid, addr, data); default: @@ -271,12 +271,6 @@ asmlinkage long sys32_ptrace(long request, u32 pid, u32 addr, u32 data) case PTRACE_SETSIGINFO: case PTRACE_GETSIGINFO: return ptrace32_siginfo(request, pid, addr, data); - - case PTRACE_SET_THREAD_AREA: - case PTRACE_GET_THREAD_AREA: - return sys_ptrace(request, pid, - addr + GDT_ENTRY_TLS_MIN - COMPAT_GDT_ENTRY_TLS_MIN, - data); } child = ptrace_get_task_struct(pid); diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 9abbdf7562c5..3b20613325dc 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -139,13 +139,12 @@ struct set_mtrr_data { mtrr_type smp_type; }; -#ifdef CONFIG_SMP - static void ipi_handler(void *info) /* [SUMMARY] Synchronisation handler. Executed by "other" CPUs. [RETURNS] Nothing. */ { +#ifdef CONFIG_SMP struct set_mtrr_data *data = info; unsigned long flags; @@ -168,9 +167,8 @@ static void ipi_handler(void *info) atomic_dec(&data->count); local_irq_restore(flags); -} - #endif +} static inline int types_compatible(mtrr_type type1, mtrr_type type2) { return type1 == MTRR_TYPE_UNCACHABLE || diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index f803ed0ed1c4..600fd404e440 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -51,13 +51,13 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu); static int endflag __initdata = 0; -#ifdef CONFIG_SMP /* The performance counters used by NMI_LOCAL_APIC don't trigger when * the CPU is idle. To make sure the NMI watchdog really ticks on all * CPUs during the test make them busy. */ static __init void nmi_cpu_busy(void *data) { +#ifdef CONFIG_SMP local_irq_enable_in_hardirq(); /* Intentionally don't use cpu_relax here. This is to make sure that the performance counter really ticks, @@ -67,8 +67,8 @@ static __init void nmi_cpu_busy(void *data) care if they get somewhat less cycles. */ while (endflag == 0) mb(); -} #endif +} static int __init check_nmi_watchdog(void) { diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index e47a9309eb48..0b4a47905575 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -789,6 +789,20 @@ static inline void cfq_slice_expired(struct cfq_data *cfqd, int timed_out) __cfq_slice_expired(cfqd, cfqq, timed_out); } +static int start_idle_class_timer(struct cfq_data *cfqd) +{ + unsigned long end = cfqd->last_end_request + CFQ_IDLE_GRACE; + unsigned long now = jiffies; + + if (time_before(now, end) && + time_after_eq(now, cfqd->last_end_request)) { + mod_timer(&cfqd->idle_class_timer, end); + return 1; + } + + return 0; +} + /* * Get next queue for service. Unless we have a queue preemption, * we'll simply select the first cfqq in the service tree. @@ -805,19 +819,14 @@ static struct cfq_queue *cfq_get_next_queue(struct cfq_data *cfqd) cfqq = rb_entry(n, struct cfq_queue, rb_node); if (cfq_class_idle(cfqq)) { - unsigned long end; - /* * if we have idle queues and no rt or be queues had * pending requests, either allow immediate service if * the grace period has passed or arm the idle grace * timer */ - end = cfqd->last_end_request + CFQ_IDLE_GRACE; - if (time_before(jiffies, end)) { - mod_timer(&cfqd->idle_class_timer, end); + if (start_idle_class_timer(cfqd)) cfqq = NULL; - } } return cfqq; @@ -2036,17 +2045,14 @@ out_cont: static void cfq_idle_class_timer(unsigned long data) { struct cfq_data *cfqd = (struct cfq_data *) data; - unsigned long flags, end; + unsigned long flags; spin_lock_irqsave(cfqd->queue->queue_lock, flags); /* * race with a non-idle queue, reset timer */ - end = cfqd->last_end_request + CFQ_IDLE_GRACE; - if (!time_after_eq(jiffies, end)) - mod_timer(&cfqd->idle_class_timer, end); - else + if (!start_idle_class_timer(cfqd)) cfq_schedule_dispatch(cfqd); spin_unlock_irqrestore(cfqd->queue->queue_lock, flags); @@ -2068,9 +2074,10 @@ static void cfq_put_async_queues(struct cfq_data *cfqd) cfq_put_queue(cfqd->async_cfqq[0][i]); if (cfqd->async_cfqq[1][i]) cfq_put_queue(cfqd->async_cfqq[1][i]); - if (cfqd->async_idle_cfqq) - cfq_put_queue(cfqd->async_idle_cfqq); } + + if (cfqd->async_idle_cfqq) + cfq_put_queue(cfqd->async_idle_cfqq); } static void cfq_exit_queue(elevator_t *e) @@ -2125,6 +2132,7 @@ static void *cfq_init_queue(struct request_queue *q) INIT_WORK(&cfqd->unplug_work, cfq_kick_queue); + cfqd->last_end_request = jiffies; cfqd->cfq_quantum = cfq_quantum; cfqd->cfq_fifo_expire[0] = cfq_fifo_expire[0]; cfqd->cfq_fifo_expire[1] = cfq_fifo_expire[1]; diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index 75c98d58f4dd..3b927be03850 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -1143,22 +1143,9 @@ EXPORT_SYMBOL(blk_queue_start_tag); void blk_queue_invalidate_tags(struct request_queue *q) { struct list_head *tmp, *n; - struct request *rq; - - list_for_each_safe(tmp, n, &q->tag_busy_list) { - rq = list_entry_rq(tmp); - if (rq->tag == -1) { - printk(KERN_ERR - "%s: bad tag found on list\n", __FUNCTION__); - list_del_init(&rq->queuelist); - rq->cmd_flags &= ~REQ_QUEUED; - } else - blk_queue_end_tag(q, rq); - - rq->cmd_flags &= ~REQ_STARTED; - __elv_add_request(q, rq, ELEVATOR_INSERT_BACK, 0); - } + list_for_each_safe(tmp, n, &q->tag_busy_list) + blk_requeue_request(q, list_entry_rq(tmp)); } EXPORT_SYMBOL(blk_queue_invalidate_tags); @@ -1634,15 +1621,7 @@ static void blk_backing_dev_unplug(struct backing_dev_info *bdi, { struct request_queue *q = bdi->unplug_io_data; - /* - * devices don't necessarily have an ->unplug_fn defined - */ - if (q->unplug_fn) { - blk_add_trace_pdu_int(q, BLK_TA_UNPLUG_IO, NULL, - q->rq.count[READ] + q->rq.count[WRITE]); - - q->unplug_fn(q); - } + blk_unplug(q); } static void blk_unplug_work(struct work_struct *work) @@ -1666,6 +1645,20 @@ static void blk_unplug_timeout(unsigned long data) kblockd_schedule_work(&q->unplug_work); } +void blk_unplug(struct request_queue *q) +{ + /* + * devices don't necessarily have an ->unplug_fn defined + */ + if (q->unplug_fn) { + blk_add_trace_pdu_int(q, BLK_TA_UNPLUG_IO, NULL, + q->rq.count[READ] + q->rq.count[WRITE]); + + q->unplug_fn(q); + } +} +EXPORT_SYMBOL(blk_unplug); + /** * blk_start_queue - restart a previously stopped queue * @q: The &struct request_queue in question diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index a8130a4ad6d4..a5ee21319d37 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -358,10 +358,19 @@ static ssize_t class_pktcdvd_store_add(struct class *c, const char *buf, size_t count) { unsigned int major, minor; + if (sscanf(buf, "%u:%u", &major, &minor) == 2) { + /* pkt_setup_dev() expects caller to hold reference to self */ + if (!try_module_get(THIS_MODULE)) + return -ENODEV; + pkt_setup_dev(MKDEV(major, minor), NULL); + + module_put(THIS_MODULE); + return count; } + return -EINVAL; } diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 7a003504c265..1bdd2bf4f37d 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -730,13 +730,23 @@ static int send_prio_char(struct tty_struct *tty, char ch) return 0; } -int n_tty_ioctl(struct tty_struct * tty, struct file * file, - unsigned int cmd, unsigned long arg) +/** + * tty_mode_ioctl - mode related ioctls + * @tty: tty for the ioctl + * @file: file pointer for the tty + * @cmd: command + * @arg: ioctl argument + * + * Perform non line discipline specific mode control ioctls. This + * is designed to be called by line disciplines to ensure they provide + * consistent mode setting. + */ + +int tty_mode_ioctl(struct tty_struct * tty, struct file *file, + unsigned int cmd, unsigned long arg) { struct tty_struct * real_tty; void __user *p = (void __user *)arg; - int retval; - struct tty_ldisc *ld; if (tty->driver->type == TTY_DRIVER_TYPE_PTY && tty->driver->subtype == PTY_TYPE_MASTER) @@ -799,6 +809,93 @@ int n_tty_ioctl(struct tty_struct * tty, struct file * file, return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_TERMIO); case TCSETA: return set_termios(real_tty, p, TERMIOS_TERMIO); +#ifndef TCGETS2 + case TIOCGLCKTRMIOS: + if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked)) + return -EFAULT; + return 0; + + case TIOCSLCKTRMIOS: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (user_termios_to_kernel_termios(real_tty->termios_locked, (struct termios __user *) arg)) + return -EFAULT; + return 0; +#else + case TIOCGLCKTRMIOS: + if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked)) + return -EFAULT; + return 0; + + case TIOCSLCKTRMIOS: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (user_termios_to_kernel_termios_1(real_tty->termios_locked, (struct termios __user *) arg)) + return -EFAULT; + return 0; +#endif + case TIOCGSOFTCAR: + return put_user(C_CLOCAL(tty) ? 1 : 0, (int __user *)arg); + case TIOCSSOFTCAR: + if (get_user(arg, (unsigned int __user *) arg)) + return -EFAULT; + mutex_lock(&tty->termios_mutex); + tty->termios->c_cflag = + ((tty->termios->c_cflag & ~CLOCAL) | + (arg ? CLOCAL : 0)); + mutex_unlock(&tty->termios_mutex); + return 0; + default: + return -ENOIOCTLCMD; + } +} + +EXPORT_SYMBOL_GPL(tty_mode_ioctl); + +int tty_perform_flush(struct tty_struct *tty, unsigned long arg) +{ + struct tty_ldisc *ld; + int retval = tty_check_change(tty); + if (retval) + return retval; + + ld = tty_ldisc_ref(tty); + switch (arg) { + case TCIFLUSH: + if (ld && ld->flush_buffer) + ld->flush_buffer(tty); + break; + case TCIOFLUSH: + if (ld && ld->flush_buffer) + ld->flush_buffer(tty); + /* fall through */ + case TCOFLUSH: + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + break; + default: + tty_ldisc_deref(ld); + return -EINVAL; + } + tty_ldisc_deref(ld); + return 0; +} + +EXPORT_SYMBOL_GPL(tty_perform_flush); + +int n_tty_ioctl(struct tty_struct * tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + struct tty_struct * real_tty; + int retval; + + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER) + real_tty = tty->link; + else + real_tty = tty; + + switch (cmd) { case TCXONC: retval = tty_check_change(tty); if (retval) @@ -829,30 +926,7 @@ int n_tty_ioctl(struct tty_struct * tty, struct file * file, } return 0; case TCFLSH: - retval = tty_check_change(tty); - if (retval) - return retval; - - ld = tty_ldisc_ref(tty); - switch (arg) { - case TCIFLUSH: - if (ld && ld->flush_buffer) - ld->flush_buffer(tty); - break; - case TCIOFLUSH: - if (ld && ld->flush_buffer) - ld->flush_buffer(tty); - /* fall through */ - case TCOFLUSH: - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); - break; - default: - tty_ldisc_deref(ld); - return -EINVAL; - } - tty_ldisc_deref(ld); - return 0; + return tty_perform_flush(tty, arg); case TIOCOUTQ: return put_user(tty->driver->chars_in_buffer ? tty->driver->chars_in_buffer(tty) : 0, @@ -862,32 +936,6 @@ int n_tty_ioctl(struct tty_struct * tty, struct file * file, if (L_ICANON(tty)) retval = inq_canon(tty); return put_user(retval, (unsigned int __user *) arg); -#ifndef TCGETS2 - case TIOCGLCKTRMIOS: - if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked)) - return -EFAULT; - return 0; - - case TIOCSLCKTRMIOS: - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - if (user_termios_to_kernel_termios(real_tty->termios_locked, (struct termios __user *) arg)) - return -EFAULT; - return 0; -#else - case TIOCGLCKTRMIOS: - if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked)) - return -EFAULT; - return 0; - - case TIOCSLCKTRMIOS: - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - if (user_termios_to_kernel_termios_1(real_tty->termios_locked, (struct termios __user *) arg)) - return -EFAULT; - return 0; -#endif - case TIOCPKT: { int pktmode; @@ -906,19 +954,9 @@ int n_tty_ioctl(struct tty_struct * tty, struct file * file, tty->packet = 0; return 0; } - case TIOCGSOFTCAR: - return put_user(C_CLOCAL(tty) ? 1 : 0, (int __user *)arg); - case TIOCSSOFTCAR: - if (get_user(arg, (unsigned int __user *) arg)) - return -EFAULT; - mutex_lock(&tty->termios_mutex); - tty->termios->c_cflag = - ((tty->termios->c_cflag & ~CLOCAL) | - (arg ? CLOCAL : 0)); - mutex_unlock(&tty->termios_mutex); - return 0; default: - return -ENOIOCTLCMD; + /* Try the mode commands */ + return tty_mode_ioctl(tty, file, cmd, arg); } } diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 5596df65c8ed..624ff3e082f6 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -650,13 +650,14 @@ static void sbp2_login(struct work_struct *work) if (sbp2_send_management_orb(lu, node_id, generation, SBP2_LOGIN_REQUEST, lu->lun, &response) < 0) { if (lu->retries++ < 5) { - queue_delayed_work(sbp2_wq, &lu->work, - DIV_ROUND_UP(HZ, 5)); + if (queue_delayed_work(sbp2_wq, &lu->work, + DIV_ROUND_UP(HZ, 5))) + kref_get(&lu->tgt->kref); } else { fw_error("failed to login to %s LUN %04x\n", unit->device.bus_id, lu->lun); - kref_put(&lu->tgt->kref, sbp2_release_target); } + kref_put(&lu->tgt->kref, sbp2_release_target); return; } @@ -914,7 +915,9 @@ static void sbp2_reconnect(struct work_struct *work) lu->retries = 0; PREPARE_DELAYED_WORK(&lu->work, sbp2_login); } - queue_delayed_work(sbp2_wq, &lu->work, DIV_ROUND_UP(HZ, 5)); + if (queue_delayed_work(sbp2_wq, &lu->work, DIV_ROUND_UP(HZ, 5))) + kref_get(&lu->tgt->kref); + kref_put(&lu->tgt->kref, sbp2_release_target); return; } diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c index 516d943227e2..075b4d99e354 100644 --- a/drivers/macintosh/windfarm_core.c +++ b/drivers/macintosh/windfarm_core.c @@ -94,7 +94,9 @@ static int wf_thread_func(void *data) DBG("wf: thread started\n"); set_freezable(); - while(!kthread_should_stop()) { + while (!kthread_should_stop()) { + try_to_freeze(); + if (time_after_eq(jiffies, next)) { wf_notify(WF_EVENT_TICK, NULL); if (wf_overtemp) { @@ -116,12 +118,6 @@ static int wf_thread_func(void *data) delay = next - jiffies; if (delay <= HZ) schedule_timeout_interruptible(delay); - - /* there should be no non-suspend signal, but oh well */ - if (signal_pending(current) && !try_to_freeze()) { - printk(KERN_WARNING "windfarm: thread got sigl !\n"); - break; - } } DBG("wf: thread stopped\n"); diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 7c426d07a555..1b1ef3130e6e 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1207,8 +1207,7 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect prepare_to_wait(&bitmap->overflow_wait, &__wait, TASK_UNINTERRUPTIBLE); spin_unlock_irq(&bitmap->lock); - bitmap->mddev->queue - ->unplug_fn(bitmap->mddev->queue); + blk_unplug(bitmap->mddev->queue); schedule(); finish_wait(&bitmap->overflow_wait, &__wait); continue; diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 5a7eb650181e..e298d8d11f24 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -1000,8 +1000,7 @@ void dm_table_unplug_all(struct dm_table *t) struct dm_dev *dd = list_entry(d, struct dm_dev, list); struct request_queue *q = bdev_get_queue(dd->bdev); - if (q->unplug_fn) - q->unplug_fn(q); + blk_unplug(q); } } diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 56a11f6c127b..3dac1cfb8189 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -87,8 +87,7 @@ static void linear_unplug(struct request_queue *q) for (i=0; i < mddev->raid_disks; i++) { struct request_queue *r_queue = bdev_get_queue(conf->disks[i].rdev->bdev); - if (r_queue->unplug_fn) - r_queue->unplug_fn(r_queue); + blk_unplug(r_queue); } } diff --git a/drivers/md/md.c b/drivers/md/md.c index 808cd9549456..cef9ebd5a046 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5445,7 +5445,7 @@ void md_do_sync(mddev_t *mddev) * about not overloading the IO subsystem. (things like an * e2fsck being done on the RAID array should execute fast) */ - mddev->queue->unplug_fn(mddev->queue); + blk_unplug(mddev->queue); cond_resched(); currspeed = ((unsigned long)(io_sectors-mddev->resync_mark_cnt))/2 @@ -5464,7 +5464,7 @@ void md_do_sync(mddev_t *mddev) * this also signals 'finished resyncing' to md_stop */ out: - mddev->queue->unplug_fn(mddev->queue); + blk_unplug(mddev->queue); wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active)); diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index b35731cceac6..eb631ebed686 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -125,8 +125,7 @@ static void unplug_slaves(mddev_t *mddev) atomic_inc(&rdev->nr_pending); rcu_read_unlock(); - if (r_queue->unplug_fn) - r_queue->unplug_fn(r_queue); + blk_unplug(r_queue); rdev_dec_pending(rdev, mddev); rcu_read_lock(); diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index c111105fc2dc..f8e591708d1f 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -35,8 +35,7 @@ static void raid0_unplug(struct request_queue *q) for (i=0; i<mddev->raid_disks; i++) { struct request_queue *r_queue = bdev_get_queue(devlist[i]->bdev); - if (r_queue->unplug_fn) - r_queue->unplug_fn(r_queue); + blk_unplug(r_queue); } } diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 85478d6a9c1a..4a69c416e045 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -549,8 +549,7 @@ static void unplug_slaves(mddev_t *mddev) atomic_inc(&rdev->nr_pending); rcu_read_unlock(); - if (r_queue->unplug_fn) - r_queue->unplug_fn(r_queue); + blk_unplug(r_queue); rdev_dec_pending(rdev, mddev); rcu_read_lock(); diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index fc6607acb6e4..5cdcc9386200 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -593,8 +593,7 @@ static void unplug_slaves(mddev_t *mddev) atomic_inc(&rdev->nr_pending); rcu_read_unlock(); - if (r_queue->unplug_fn) - r_queue->unplug_fn(r_queue); + blk_unplug(r_queue); rdev_dec_pending(rdev, mddev); rcu_read_lock(); diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 82af3465a900..1cfc984cc7b7 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3186,8 +3186,7 @@ static void unplug_slaves(mddev_t *mddev) atomic_inc(&rdev->nr_pending); rcu_read_unlock(); - if (r_queue->unplug_fn) - r_queue->unplug_fn(r_queue); + blk_unplug(r_queue); rdev_dec_pending(rdev, mddev); rcu_read_lock(); diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 9203a0b221b3..1b9c9b6da5b7 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -310,7 +310,7 @@ static void copy_sg(struct scatterlist *dst, unsigned int dst_len, } if (src_size == 0) { - src_buf = sg_virt(dst); + src_buf = sg_virt(src); src_size = src->length; } diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 5f800a6dd978..bf8890ebbc4c 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -136,10 +136,11 @@ config TUN If you don't know what to use this for, you don't need it. config VETH - tristate "Virtual ethernet device" + tristate "Virtual ethernet pair device" ---help--- - The device is an ethernet tunnel. Devices are created in pairs. When - one end receives the packet it appears on its pair and vice versa. + This device is a local ethernet tunnel. Devices are created in pairs. + When one end receives the packet it appears on its pair and vice + versa. config NET_SB1000 tristate "General Instruments Surfboard 1000" @@ -234,7 +235,7 @@ source "drivers/net/arm/Kconfig" config AX88796 tristate "ASIX AX88796 NE2000 clone support" - depends on ARM || MIPS + depends on ARM || MIPS || SUPERH select CRC32 select MII help diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 6937ef0e7275..a198404a3e36 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4405,6 +4405,7 @@ static int bond_init(struct net_device *bond_dev, struct bond_params *params) bond_dev->set_multicast_list = bond_set_multicast_list; bond_dev->change_mtu = bond_change_mtu; bond_dev->set_mac_address = bond_set_mac_address; + bond_dev->validate_addr = NULL; bond_set_mode_ops(bond, bond->params.mode); diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 7a06ade85b02..b29330d8e309 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1193,8 +1193,6 @@ static ssize_t bonding_show_active_slave(struct device *d, struct bonding *bond = to_bond(d); int count; - rtnl_lock(); - read_lock(&bond->curr_slave_lock); curr = bond->curr_active_slave; read_unlock(&bond->curr_slave_lock); @@ -1216,7 +1214,9 @@ static ssize_t bonding_store_active_slave(struct device *d, struct slave *new_active = NULL; struct bonding *bond = to_bond(d); + rtnl_lock(); write_lock_bh(&bond->lock); + if (!USES_PRIMARY(bond->params.mode)) { printk(KERN_INFO DRV_NAME ": %s: Unable to change active slave; %s is in mode %d\n", diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index e0119f6a3319..580cb4ab2af1 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -762,26 +762,20 @@ static int sixpack_ioctl(struct tty_struct *tty, struct file *file, if (copy_from_user(&addr, (void __user *) arg, AX25_ADDR_LEN)) { - err = -EFAULT; - break; - } + err = -EFAULT; + break; + } - netif_tx_lock_bh(dev); - memcpy(dev->dev_addr, &addr, AX25_ADDR_LEN); - netif_tx_unlock_bh(dev); + netif_tx_lock_bh(dev); + memcpy(dev->dev_addr, &addr, AX25_ADDR_LEN); + netif_tx_unlock_bh(dev); - err = 0; - break; - } - - /* Allow stty to read, but not set, the serial port */ - case TCGETS: - case TCGETA: - err = n_tty_ioctl(tty, (struct file *) file, cmd, arg); - break; + err = 0; + break; + } default: - err = -ENOIOCTLCMD; + err = tty_mode_ioctl(tty, file, cmd, arg); } sp_put(sp); diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c index 2c6f7be36e8a..fc753d7f674e 100644 --- a/drivers/net/irda/irtty-sir.c +++ b/drivers/net/irda/irtty-sir.c @@ -434,11 +434,6 @@ static int irtty_ioctl(struct tty_struct *tty, struct file *file, unsigned int c IRDA_ASSERT(dev != NULL, return -1;); switch (cmd) { - case TCGETS: - case TCGETA: - err = n_tty_ioctl(tty, file, cmd, arg); - break; - case IRTTY_IOCTDONGLE: /* this call blocks for completion */ err = sirdev_set_dongle(dev, (IRDA_DONGLE) arg); @@ -454,7 +449,7 @@ static int irtty_ioctl(struct tty_struct *tty, struct file *file, unsigned int c err = -EFAULT; break; default: - err = -ENOIOCTLCMD; + err = tty_mode_ioctl(tty, file, cmd, arg); break; } return err; diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c index ab4d309a858f..09b4fde8d924 100644 --- a/drivers/net/pasemi_mac.c +++ b/drivers/net/pasemi_mac.c @@ -580,6 +580,16 @@ static int pasemi_mac_clean_rx(struct pasemi_mac *mac, int limit) len = (macrx & XCT_MACRX_LLEN_M) >> XCT_MACRX_LLEN_S; + pci_unmap_single(mac->dma_pdev, dma, len, PCI_DMA_FROMDEVICE); + + if (macrx & XCT_MACRX_CRC) { + /* CRC error flagged */ + mac->netdev->stats.rx_errors++; + mac->netdev->stats.rx_crc_errors++; + dev_kfree_skb_irq(skb); + goto next; + } + if (len < 256) { struct sk_buff *new_skb; @@ -595,11 +605,10 @@ static int pasemi_mac_clean_rx(struct pasemi_mac *mac, int limit) } else info->skb = NULL; - pci_unmap_single(mac->dma_pdev, dma, len, PCI_DMA_FROMDEVICE); - info->dma = 0; - skb_put(skb, len); + /* Don't include CRC */ + skb_put(skb, len-4); if (likely((macrx & XCT_MACRX_HTY_M) == XCT_MACRX_HTY_IPV4_OK)) { skb->ip_summed = CHECKSUM_UNNECESSARY; @@ -614,6 +623,7 @@ static int pasemi_mac_clean_rx(struct pasemi_mac *mac, int limit) skb->protocol = eth_type_trans(skb, mac->netdev); netif_receive_skb(skb); +next: RX_RING(mac, n) = 0; RX_RING(mac, n+1) = 0; @@ -1126,7 +1136,7 @@ static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev) unsigned long flags; int i, nfrags; - dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_SS | XCT_MACTX_CRC_PAD; + dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_CRC_PAD; if (skb->ip_summed == CHECKSUM_PARTIAL) { const unsigned char *nh = skb_network_header(skb); diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c index 27f5b904f48e..8d278c87ba48 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp_async.c @@ -309,16 +309,11 @@ ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file, err = 0; break; - case TCGETS: - case TCGETA: - err = n_tty_ioctl(tty, file, cmd, arg); - break; - case TCFLSH: /* flush our buffers and the serial port's buffer */ if (arg == TCIOFLUSH || arg == TCOFLUSH) ppp_async_flush_output(ap); - err = n_tty_ioctl(tty, file, cmd, arg); + err = tty_perform_flush(tty, arg); break; case FIONREAD: @@ -329,7 +324,8 @@ ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file, break; default: - err = -ENOIOCTLCMD; + /* Try the various mode ioctls */ + err = tty_mode_ioctl(tty, file, cmd, arg); } ap_put(ap); diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c index ce64032a465a..00e2fb48b4ae 100644 --- a/drivers/net/ppp_synctty.c +++ b/drivers/net/ppp_synctty.c @@ -349,16 +349,11 @@ ppp_synctty_ioctl(struct tty_struct *tty, struct file *file, err = 0; break; - case TCGETS: - case TCGETA: - err = n_tty_ioctl(tty, file, cmd, arg); - break; - case TCFLSH: /* flush our buffers and the serial port's buffer */ if (arg == TCIOFLUSH || arg == TCOFLUSH) ppp_sync_flush_output(ap); - err = n_tty_ioctl(tty, file, cmd, arg); + err = tty_perform_flush(tty, arg); break; case FIONREAD: @@ -369,7 +364,8 @@ ppp_synctty_ioctl(struct tty_struct *tty, struct file *file, break; default: - err = -ENOIOCTLCMD; + err = tty_mode_ioctl(tty, file, cmd, arg); + break; } sp_put(ap); diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index f8904fd92369..a7556cd2df79 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -488,7 +488,7 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb) { struct pppol2tp_session *session = NULL; struct pppol2tp_tunnel *tunnel; - unsigned char *ptr; + unsigned char *ptr, *optr; u16 hdrflags; u16 tunnel_id, session_id; int length; @@ -496,7 +496,7 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb) tunnel = pppol2tp_sock_to_tunnel(sock); if (tunnel == NULL) - goto error; + goto no_tunnel; /* UDP always verifies the packet length. */ __skb_pull(skb, sizeof(struct udphdr)); @@ -509,7 +509,7 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb) } /* Point to L2TP header */ - ptr = skb->data; + optr = ptr = skb->data; /* Get L2TP header flags */ hdrflags = ntohs(*(__be16*)ptr); @@ -637,12 +637,14 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb) /* If offset bit set, skip it. */ if (hdrflags & L2TP_HDRFLAG_O) { offset = ntohs(*(__be16 *)ptr); - skb->transport_header += 2 + offset; - if (!pskb_may_pull(skb, skb_transport_offset(skb) + 2)) - goto discard; + ptr += 2 + offset; } - __skb_pull(skb, skb_transport_offset(skb)); + offset = ptr - optr; + if (!pskb_may_pull(skb, offset)) + goto discard; + + __skb_pull(skb, offset); /* Skip PPP header, if present. In testing, Microsoft L2TP clients * don't send the PPP header (PPP header compression enabled), but @@ -652,6 +654,9 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb) * Note that skb->data[] isn't dereferenced from a u16 ptr here since * the field may be unaligned. */ + if (!pskb_may_pull(skb, 2)) + goto discard; + if ((skb->data[0] == 0xff) && (skb->data[1] == 0x03)) skb_pull(skb, 2); @@ -709,6 +714,10 @@ discard: return 0; error: + /* Put UDP header back */ + __skb_push(skb, sizeof(struct udphdr)); + +no_tunnel: return 1; } @@ -1050,6 +1059,8 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) /* Get routing info from the tunnel socket */ dst_release(skb->dst); skb->dst = sk_dst_get(sk_tun); + skb_orphan(skb); + skb->sk = sk_tun; /* Queue the packet to IP for output */ len = skb->len; diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 30adf726743c..a5791114b7bd 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -1456,16 +1456,11 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev) PHYAddr[qdev->mac_index]); reg &= ~PHY_GIG_ALL_PARAMS; - if(portConfiguration & - PORT_CONFIG_FULL_DUPLEX_ENABLED & - PORT_CONFIG_1000MB_SPEED) { - reg |= PHY_GIG_ADV_1000F; - } - - if(portConfiguration & - PORT_CONFIG_HALF_DUPLEX_ENABLED & - PORT_CONFIG_1000MB_SPEED) { - reg |= PHY_GIG_ADV_1000H; + if(portConfiguration & PORT_CONFIG_1000MB_SPEED) { + if(portConfiguration & PORT_CONFIG_FULL_DUPLEX_ENABLED) + reg |= PHY_GIG_ADV_1000F; + else + reg |= PHY_GIG_ADV_1000H; } ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg, @@ -1645,8 +1640,11 @@ static int ql_finish_auto_neg(struct ql3_adapter *qdev) return 0; } -static void ql_link_state_machine(struct ql3_adapter *qdev) +static void ql_link_state_machine_work(struct work_struct *work) { + struct ql3_adapter *qdev = + container_of(work, struct ql3_adapter, link_state_work.work); + u32 curr_link_state; unsigned long hw_flags; @@ -1661,6 +1659,10 @@ static void ql_link_state_machine(struct ql3_adapter *qdev) "state.\n", qdev->ndev->name); spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + + /* Restart timer on 2 second interval. */ + mod_timer(&qdev->adapter_timer, jiffies + HZ * 1);\ + return; } @@ -1705,6 +1707,9 @@ static void ql_link_state_machine(struct ql3_adapter *qdev) break; } spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + + /* Restart timer on 2 second interval. */ + mod_timer(&qdev->adapter_timer, jiffies + HZ * 1); } /* @@ -3941,19 +3946,7 @@ static void ql_get_board_info(struct ql3_adapter *qdev) static void ql3xxx_timer(unsigned long ptr) { struct ql3_adapter *qdev = (struct ql3_adapter *)ptr; - - if (test_bit(QL_RESET_ACTIVE,&qdev->flags)) { - printk(KERN_DEBUG PFX - "%s: Reset in progress.\n", - qdev->ndev->name); - goto end; - } - - ql_link_state_machine(qdev); - - /* Restart timer on 2 second interval. */ -end: - mod_timer(&qdev->adapter_timer, jiffies + HZ * 1); + queue_delayed_work(qdev->workqueue, &qdev->link_state_work, 0); } static int __devinit ql3xxx_probe(struct pci_dev *pdev, @@ -4103,6 +4096,7 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev, qdev->workqueue = create_singlethread_workqueue(ndev->name); INIT_DELAYED_WORK(&qdev->reset_work, ql_reset_work); INIT_DELAYED_WORK(&qdev->tx_timeout_work, ql_tx_timeout_work); + INIT_DELAYED_WORK(&qdev->link_state_work, ql_link_state_machine_work); init_timer(&qdev->adapter_timer); qdev->adapter_timer.function = ql3xxx_timer; diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h index fbcb0b949639..d0ffb30ef371 100644 --- a/drivers/net/qla3xxx.h +++ b/drivers/net/qla3xxx.h @@ -1286,6 +1286,7 @@ struct ql3_adapter { struct workqueue_struct *workqueue; struct delayed_work reset_work; struct delayed_work tx_timeout_work; + struct delayed_work link_state_work; u32 max_frame_size; u32 device_id; u16 phyType; diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index b94fa7ef1955..1f647b9ce352 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -171,6 +171,8 @@ static struct pci_device_id rtl8169_pci_tbl[] = { { PCI_DEVICE(0x16ec, 0x0116), 0, 0, RTL_CFG_0 }, { PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, 0x0024, 0, 0, RTL_CFG_0 }, + { 0x0001, 0x8168, + PCI_ANY_ID, 0x2410, 0, 0, RTL_CFG_2 }, {0,}, }; @@ -468,7 +470,7 @@ static void mdio_write(void __iomem *ioaddr, int reg_addr, int value) { int i; - RTL_W32(PHYAR, 0x80000000 | (reg_addr & 0xFF) << 16 | value); + RTL_W32(PHYAR, 0x80000000 | (reg_addr & 0x1f) << 16 | (value & 0xffff)); for (i = 20; i > 0; i--) { /* @@ -485,7 +487,7 @@ static int mdio_read(void __iomem *ioaddr, int reg_addr) { int i, value = -1; - RTL_W32(PHYAR, 0x0 | (reg_addr & 0xFF) << 16); + RTL_W32(PHYAR, 0x0 | (reg_addr & 0x1f) << 16); for (i = 20; i > 0; i--) { /* @@ -493,7 +495,7 @@ static int mdio_read(void __iomem *ioaddr, int reg_addr) * the specified MII register. */ if (RTL_R32(PHYAR) & 0x80000000) { - value = (int) (RTL_R32(PHYAR) & 0xFFFF); + value = RTL_R32(PHYAR) & 0xffff; break; } udelay(25); @@ -1245,16 +1247,6 @@ static void rtl8169sb_hw_phy_config(void __iomem *ioaddr) rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); } -static void rtl8168b_hw_phy_config(void __iomem *ioaddr) -{ - struct phy_reg phy_reg_init[] = { - { 0x1f, 0x0000 }, - { 0x10, 0xf41b }, - { 0x1f, 0x0000 } - }; - - rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init)); -} static void rtl8168cp_hw_phy_config(void __iomem *ioaddr) { @@ -1324,11 +1316,6 @@ static void rtl_hw_phy_config(struct net_device *dev) case RTL_GIGA_MAC_VER_04: rtl8169sb_hw_phy_config(ioaddr); break; - case RTL_GIGA_MAC_VER_11: - case RTL_GIGA_MAC_VER_12: - case RTL_GIGA_MAC_VER_17: - rtl8168b_hw_phy_config(ioaddr); - break; case RTL_GIGA_MAC_VER_18: rtl8168cp_hw_phy_config(ioaddr); break; @@ -1739,7 +1726,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) tp->features |= rtl_try_msi(pdev, ioaddr, cfg); RTL_W8(Cfg9346, Cfg9346_Lock); - if (RTL_R8(PHYstatus) & TBI_Enable) { + if ((tp->mac_version <= RTL_GIGA_MAC_VER_06) && + (RTL_R8(PHYstatus) & TBI_Enable)) { tp->set_speed = rtl8169_set_speed_tbi; tp->get_settings = rtl8169_gset_tbi; tp->phy_reset_enable = rtl8169_tbi_reset_enable; diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c index b822859c8de3..73a7e6529ee0 100644 --- a/drivers/net/rrunner.c +++ b/drivers/net/rrunner.c @@ -78,12 +78,6 @@ static char version[] __devinitdata = "rrunner.c: v0.50 11/11/2002 Jes Sorensen * stack will need to know about I/O vectors or something similar. */ -/* - * sysctl_[wr]mem_max are checked at init time to see if they are at - * least 256KB and increased to 256KB if they are not. This is done to - * avoid ending up with socket buffers smaller than the MTU size, - */ - static int __devinit rr_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -561,18 +555,6 @@ static int __devinit rr_init(struct net_device *dev) sram_size = rr_read_eeprom_word(rrpriv, (void *)8); printk(" SRAM size 0x%06x\n", sram_size); - if (sysctl_rmem_max < 262144){ - printk(" Receive socket buffer limit too low (%i), " - "setting to 262144\n", sysctl_rmem_max); - sysctl_rmem_max = 262144; - } - - if (sysctl_wmem_max < 262144){ - printk(" Transmit socket buffer limit too low (%i), " - "setting to 262144\n", sysctl_wmem_max); - sysctl_wmem_max = 262144; - } - return 0; } diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index c27c7d63b6a5..a2070db725c9 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -52,7 +52,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.19" +#define DRV_VERSION "1.20" #define PFX DRV_NAME " " /* @@ -121,6 +121,7 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */ @@ -134,6 +135,7 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */ { 0 } }; @@ -156,7 +158,7 @@ static const char *yukon2_name[] = { static void sky2_set_multicast(struct net_device *dev); -/* Access to external PHY */ +/* Access to PHY via serial interconnect */ static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) { int i; @@ -166,13 +168,22 @@ static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg)); for (i = 0; i < PHY_RETRIES; i++) { - if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY)) + u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL); + if (ctrl == 0xffff) + goto io_error; + + if (!(ctrl & GM_SMI_CT_BUSY)) return 0; - udelay(1); + + udelay(10); } - printk(KERN_WARNING PFX "%s: phy write timeout\n", hw->dev[port]->name); + dev_warn(&hw->pdev->dev,"%s: phy write timeout\n", hw->dev[port]->name); return -ETIMEDOUT; + +io_error: + dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name); + return -EIO; } static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val) @@ -183,23 +194,29 @@ static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val) | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD); for (i = 0; i < PHY_RETRIES; i++) { - if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) { + u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL); + if (ctrl == 0xffff) + goto io_error; + + if (ctrl & GM_SMI_CT_RD_VAL) { *val = gma_read16(hw, port, GM_SMI_DATA); return 0; } - udelay(1); + udelay(10); } + dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name); return -ETIMEDOUT; +io_error: + dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name); + return -EIO; } -static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) +static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) { u16 v; - - if (__gm_phy_read(hw, port, reg, &v) != 0) - printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name); + __gm_phy_read(hw, port, reg, &v); return v; } @@ -273,8 +290,6 @@ static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port) /* disable all GMAC IRQ's */ sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0); - /* disable PHY IRQs */ - gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */ gma_write16(hw, port, GM_MC_ADDR_H2, 0); @@ -1805,29 +1820,6 @@ static void sky2_link_up(struct sky2_port *sky2) sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); - if (hw->flags & SKY2_HW_NEWER_PHY) { - u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); - u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */ - - switch(sky2->speed) { - case SPEED_10: - led |= PHY_M_LEDC_INIT_CTRL(7); - break; - - case SPEED_100: - led |= PHY_M_LEDC_STA1_CTRL(7); - break; - - case SPEED_1000: - led |= PHY_M_LEDC_STA0_CTRL(7); - break; - } - - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); - gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); - } - if (netif_msg_link(sky2)) printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex, flow control %s\n", @@ -2247,20 +2239,26 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) do { struct sky2_port *sky2; struct sky2_status_le *le = hw->st_le + hw->st_idx; - unsigned port = le->css & CSS_LINK_BIT; + unsigned port; struct net_device *dev; struct sk_buff *skb; u32 status; u16 length; + u8 opcode = le->opcode; + + if (!(opcode & HW_OWNER)) + break; hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE); + port = le->css & CSS_LINK_BIT; dev = hw->dev[port]; sky2 = netdev_priv(dev); length = le16_to_cpu(le->length); status = le32_to_cpu(le->status); - switch (le->opcode & ~HW_OWNER) { + le->opcode = 0; + switch (opcode & ~HW_OWNER) { case OP_RXSTAT: ++rx[port]; skb = sky2_receive(dev, length, status); @@ -2353,7 +2351,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) default: if (net_ratelimit()) printk(KERN_WARNING PFX - "unknown status opcode 0x%x\n", le->opcode); + "unknown status opcode 0x%x\n", opcode); } } while (hw->st_idx != idx); @@ -2439,13 +2437,26 @@ static void sky2_hw_intr(struct sky2_hw *hw) if (status & Y2_IS_PCI_EXP) { /* PCI-Express uncorrectable Error occurred */ - int pos = pci_find_aer_capability(hw->pdev); + int aer = pci_find_aer_capability(hw->pdev); u32 err; - pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_STATUS, &err); + if (aer) { + pci_read_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS, + &err); + pci_cleanup_aer_uncorrect_error_status(pdev); + } else { + /* Either AER not configured, or not working + * because of bad MMCONFIG, so just do recover + * manually. + */ + err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); + sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS, + 0xfffffffful); + } + if (net_ratelimit()) dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err); - pci_cleanup_aer_uncorrect_error_status(pdev); + } if (status & Y2_HWE_L1_MASK) @@ -2791,6 +2802,9 @@ static void sky2_reset(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_RST_SET); sky2_write8(hw, B0_CTST, CS_RST_CLR); + /* allow writes to PCI config */ + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + /* clear PCI errors, if any */ pci_read_config_word(pdev, PCI_STATUS, &status); status |= PCI_STATUS_ERROR_BITS; @@ -2800,9 +2814,18 @@ static void sky2_reset(struct sky2_hw *hw) cap = pci_find_capability(pdev, PCI_CAP_ID_EXP); if (cap) { - /* Check for advanced error reporting */ - pci_cleanup_aer_uncorrect_error_status(pdev); - pci_cleanup_aer_correct_error_status(pdev); + if (pci_find_aer_capability(pdev)) { + /* Check for advanced error reporting */ + pci_cleanup_aer_uncorrect_error_status(pdev); + pci_cleanup_aer_correct_error_status(pdev); + } else { + dev_warn(&pdev->dev, + "PCI Express Advanced Error Reporting" + " not configured or MMCONFIG problem?\n"); + + sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS, + 0xfffffffful); + } /* If error bit is stuck on ignore it */ if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP) @@ -3974,7 +3997,8 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, dev->tx_timeout = sky2_tx_timeout; dev->watchdog_timeo = TX_WATCHDOG; #ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = sky2_netpoll; + if (port == 0) + dev->poll_controller = sky2_netpoll; #endif sky2 = netdev_priv(dev); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 49ee264064ab..69525fd7908d 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -247,7 +247,8 @@ enum csr_regs { B3_PA_CTRL = 0x01f0, B3_PA_TEST = 0x01f2, - Y2_CFG_SPC = 0x1c00, + Y2_CFG_SPC = 0x1c00, /* PCI config space region */ + Y2_CFG_AER = 0x1d00, /* PCI Advanced Error Report region */ }; /* B0_CTST 16 bit Control/Status register */ diff --git a/drivers/net/slip.c b/drivers/net/slip.c index 335b7cc80eba..251a3ce376ac 100644 --- a/drivers/net/slip.c +++ b/drivers/net/slip.c @@ -1218,14 +1218,8 @@ static int slip_ioctl(struct tty_struct *tty, struct file *file, unsigned int cm return 0; /* VSV changes end */ #endif - - /* Allow stty to read, but not set, the serial port */ - case TCGETS: - case TCGETA: - return n_tty_ioctl(tty, file, cmd, arg); - default: - return -ENOIOCTLCMD; + return tty_mode_ioctl(tty, file, cmd, arg); } } diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 729fd28c08b5..db34e1eb67e9 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -224,6 +224,21 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) } } +#elif defined(CONFIG_MACH_ZYLONITE) + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_IO_SHIFT 0 +#define SMC_NOWAIT 1 +#define SMC_USE_PXA_DMA 1 +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) +#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) + #elif defined(CONFIG_ARCH_OMAP) /* We can only do 16-bit reads and writes in the static memory space. */ diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 5a96d74e4ce8..a12c9c41b217 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -93,13 +93,9 @@ config USB_RTL8150 To compile this driver as a module, choose M here: the module will be called rtl8150. -config USB_USBNET_MII - tristate - default n - config USB_USBNET tristate "Multi-purpose USB Networking Framework" - select MII if USB_USBNET_MII != n + select MII ---help--- This driver supports several kinds of network links over USB, with "minidrivers" built around a common network driver core @@ -135,7 +131,6 @@ config USB_NET_AX8817X tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters" depends on USB_USBNET && NET_ETHERNET select CRC32 - select USB_USBNET_MII default y help This option adds support for ASIX AX88xxx based USB 2.0 @@ -190,7 +185,6 @@ config USB_NET_DM9601 tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices" depends on USB_USBNET select CRC32 - select USB_USBNET_MII help This option adds support for Davicom DM9601 based USB 1.1 10/100 Ethernet adapters. @@ -225,7 +219,6 @@ config USB_NET_PLUSB config USB_NET_MCS7830 tristate "MosChip MCS7830 based Ethernet adapters" depends on USB_USBNET - select USB_USBNET_MII help Choose this option if you're using a 10/100 Ethernet USB2 adapter based on the MosChip 7830 controller. This includes diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index acd5f1c0e63a..8ed1fc5cbc70 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -683,9 +683,6 @@ done_nopm: * they'll probably want to use this base set. */ -#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE) -#define HAVE_MII - int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd) { struct usbnet *dev = netdev_priv(net); @@ -744,8 +741,6 @@ int usbnet_nway_reset(struct net_device *net) } EXPORT_SYMBOL_GPL(usbnet_nway_reset); -#endif /* HAVE_MII */ - void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) { struct usbnet *dev = netdev_priv(net); @@ -776,12 +771,10 @@ EXPORT_SYMBOL_GPL(usbnet_set_msglevel); /* drivers may override default ethtool_ops in their bind() routine */ static struct ethtool_ops usbnet_ethtool_ops = { -#ifdef HAVE_MII .get_settings = usbnet_get_settings, .set_settings = usbnet_set_settings, .get_link = usbnet_get_link, .nway_reset = usbnet_nway_reset, -#endif .get_drvinfo = usbnet_get_drvinfo, .get_msglevel = usbnet_get_msglevel, .set_msglevel = usbnet_set_msglevel, diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index c48b1cc63fd5..1e89d4de1bb7 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -719,12 +719,8 @@ static int x25_asy_ioctl(struct tty_struct *tty, struct file *file, return 0; case SIOCSIFHWADDR: return -EINVAL; - /* Allow stty to read, but not set, the serial port */ - case TCGETS: - case TCGETA: - return n_tty_ioctl(tty, file, cmd, arg); default: - return -ENOIOCTLCMD; + return tty_mode_ioctl(tty, file, cmd, arg); } } diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index dae5c8d5a318..2b733c582915 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -325,7 +325,7 @@ config HERMES Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel - PRO/Wireless, and Symbol Spectrum24 High Rate amongst others. + IPW2011, and Symbol Spectrum24 High Rate amongst others. This option includes the guts of the driver, but in order to actually use a card you will also need to enable support for PCMCIA diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index e3c573e56b63..fdbc351ac333 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -61,16 +61,18 @@ config B43_PCMCIA If unsure, say N. -# LED support +# This config option automatically enables b43 LEDS support, +# if it's possible. config B43_LEDS bool - depends on B43 && MAC80211_LEDS + depends on B43 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43) default y -# RFKILL support +# This config option automatically enables b43 RFKILL support, +# if it's possible. config B43_RFKILL bool - depends on B43 && RFKILL && RFKILL_INPUT && INPUT_POLLDEV + depends on B43 && (RFKILL = y || RFKILL = B43) && RFKILL_INPUT && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43) default y config B43_DEBUG diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index 734e70e1a06d..ef0075d9f9cb 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -128,7 +128,7 @@ static ssize_t shm_read_file(struct b43_wldev *dev, __le16 *le16buf = (__le16 *)buf; for (i = 0; i < 0x1000; i++) { - if (bufsize <= 0) + if (bufsize < sizeof(tmp)) break; tmp = b43_shm_read16(dev, B43_SHM_SHARED, 2 * i); le16buf[i] = cpu_to_le16(tmp); diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 5058e60e5703..2b17c1dc46f1 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2985,6 +2985,16 @@ static void b43_wireless_core_stop(struct b43_wldev *dev) if (b43_status(dev) < B43_STAT_STARTED) return; + + /* Disable and sync interrupts. We must do this before than + * setting the status to INITIALIZED, as the interrupt handler + * won't care about IRQs then. */ + spin_lock_irqsave(&wl->irq_lock, flags); + dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL); + b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */ + spin_unlock_irqrestore(&wl->irq_lock, flags); + b43_synchronize_irq(dev); + b43_set_status(dev, B43_STAT_INITIALIZED); mutex_unlock(&wl->mutex); @@ -2995,13 +3005,6 @@ static void b43_wireless_core_stop(struct b43_wldev *dev) ieee80211_stop_queues(wl->hw); //FIXME this could cause a deadlock, as mac80211 seems buggy. - /* Disable and sync interrupts. */ - spin_lock_irqsave(&wl->irq_lock, flags); - dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL); - b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */ - spin_unlock_irqrestore(&wl->irq_lock, flags); - b43_synchronize_irq(dev); - b43_mac_suspend(dev); free_irq(dev->dev->irq, dev); b43dbg(wl, "Wireless interface stopped\n"); @@ -3661,7 +3664,6 @@ static int b43_setup_modes(struct b43_wldev *dev, static void b43_wireless_core_detach(struct b43_wldev *dev) { - b43_rfkill_free(dev); /* We release firmware that late to not be required to re-request * is all the time when we reinit the core. */ b43_release_firmware(dev); @@ -3747,7 +3749,6 @@ static int b43_wireless_core_attach(struct b43_wldev *dev) if (!wl->current_dev) wl->current_dev = dev; INIT_WORK(&dev->restart_work, b43_chip_reset); - b43_rfkill_alloc(dev); b43_radio_turn_off(dev, 1); b43_switch_analog(dev, 0); diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index b242a9a90dd2..b79a6bd5396d 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -65,12 +65,12 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) tuple_t tuple; cisparse_t parse; int err = -ENOMEM; - int res; + int res = 0; unsigned char buf[64]; ssb = kzalloc(sizeof(*ssb), GFP_KERNEL); if (!ssb) - goto out; + goto out_error; err = -ENODEV; tuple.DesiredTuple = CISTPL_CONFIG; @@ -96,10 +96,12 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) dev->io.NumPorts2 = 0; dev->io.Attributes2 = 0; - win.Attributes = WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; + win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM | + WIN_ENABLE | WIN_DATA_WIDTH_16 | + WIN_USE_WAIT; win.Base = 0; win.Size = SSB_CORE_SIZE; - win.AccessSpeed = 1000; + win.AccessSpeed = 250; res = pcmcia_request_window(&dev, &win, &dev->win); if (res != CS_SUCCESS) goto err_kfree_ssb; @@ -108,21 +110,34 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) mem.Page = 0; res = pcmcia_map_mem_page(dev->win, &mem); if (res != CS_SUCCESS) - goto err_kfree_ssb; + goto err_disable; + + dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FIRST_SHARED; + dev->irq.IRQInfo1 = IRQ_LEVEL_ID | IRQ_SHARE_ID; + dev->irq.Handler = NULL; /* The handler is registered later. */ + dev->irq.Instance = NULL; + res = pcmcia_request_irq(dev, &dev->irq); + if (res != CS_SUCCESS) + goto err_disable; res = pcmcia_request_configuration(dev, &dev->conf); if (res != CS_SUCCESS) goto err_disable; err = ssb_bus_pcmciabus_register(ssb, dev, win.Base); + if (err) + goto err_disable; dev->priv = ssb; - out: - return err; - err_disable: + return 0; + +err_disable: pcmcia_disable_device(dev); - err_kfree_ssb: +err_kfree_ssb: kfree(ssb); +out_error: + printk(KERN_ERR "b43-pcmcia: Initialization failed (%d, %d)\n", + res, err); return err; } @@ -131,22 +146,21 @@ static void __devexit b43_pcmcia_remove(struct pcmcia_device *dev) struct ssb_bus *ssb = dev->priv; ssb_bus_unregister(ssb); - pcmcia_release_window(dev->win); pcmcia_disable_device(dev); kfree(ssb); dev->priv = NULL; } static struct pcmcia_driver b43_pcmcia_driver = { - .owner = THIS_MODULE, - .drv = { - .name = "b43-pcmcia", - }, - .id_table = b43_pcmcia_tbl, - .probe = b43_pcmcia_probe, - .remove = b43_pcmcia_remove, - .suspend = b43_pcmcia_suspend, - .resume = b43_pcmcia_resume, + .owner = THIS_MODULE, + .drv = { + .name = "b43-pcmcia", + }, + .id_table = b43_pcmcia_tbl, + .probe = b43_pcmcia_probe, + .remove = __devexit_p(b43_pcmcia_remove), + .suspend = b43_pcmcia_suspend, + .resume = b43_pcmcia_resume, }; int b43_pcmcia_init(void) diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 800e0a61a7f5..9b1f905ffbf4 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -47,32 +47,35 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) struct b43_wldev *dev = poll_dev->private; struct b43_wl *wl = dev->wl; bool enabled; + bool report_change = 0; mutex_lock(&wl->mutex); B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED); enabled = b43_is_hw_radio_enabled(dev); if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; + report_change = 1; b43info(wl, "Radio hardware status changed to %s\n", enabled ? "ENABLED" : "DISABLED"); - mutex_unlock(&wl->mutex); + } + mutex_unlock(&wl->mutex); + + if (unlikely(report_change)) input_report_key(poll_dev->input, KEY_WLAN, enabled); - } else - mutex_unlock(&wl->mutex); } -/* Called when the RFKILL toggled in software. - * This is called without locking. */ +/* Called when the RFKILL toggled in software. */ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) { struct b43_wldev *dev = data; struct b43_wl *wl = dev->wl; int err = 0; - mutex_lock(&wl->mutex); - if (b43_status(dev) < B43_STAT_INITIALIZED) - goto out_unlock; + if (!wl->rfkill.registered) + return 0; + mutex_lock(&wl->mutex); + B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED); switch (state) { case RFKILL_STATE_ON: if (!dev->radio_hw_enable) { @@ -89,7 +92,6 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) b43_radio_turn_off(dev, 0); break; } - out_unlock: mutex_unlock(&wl->mutex); @@ -98,11 +100,11 @@ out_unlock: char * b43_rfkill_led_name(struct b43_wldev *dev) { - struct b43_wl *wl = dev->wl; + struct b43_rfkill *rfk = &(dev->wl->rfkill); - if (!wl->rfkill.rfkill) + if (!rfk->registered) return NULL; - return rfkill_get_led_name(wl->rfkill.rfkill); + return rfkill_get_led_name(rfk->rfkill); } void b43_rfkill_init(struct b43_wldev *dev) @@ -111,53 +113,13 @@ void b43_rfkill_init(struct b43_wldev *dev) struct b43_rfkill *rfk = &(wl->rfkill); int err; - if (rfk->rfkill) { - err = rfkill_register(rfk->rfkill); - if (err) { - b43warn(wl, "Failed to register RF-kill button\n"); - goto err_free_rfk; - } - } - if (rfk->poll_dev) { - err = input_register_polled_device(rfk->poll_dev); - if (err) { - b43warn(wl, "Failed to register RF-kill polldev\n"); - goto err_free_polldev; - } - } - - return; -err_free_rfk: - rfkill_free(rfk->rfkill); - rfk->rfkill = NULL; -err_free_polldev: - input_free_polled_device(rfk->poll_dev); - rfk->poll_dev = NULL; -} - -void b43_rfkill_exit(struct b43_wldev *dev) -{ - struct b43_rfkill *rfk = &(dev->wl->rfkill); - - if (rfk->poll_dev) - input_unregister_polled_device(rfk->poll_dev); - if (rfk->rfkill) - rfkill_unregister(rfk->rfkill); -} - -void b43_rfkill_alloc(struct b43_wldev *dev) -{ - struct b43_wl *wl = dev->wl; - struct b43_rfkill *rfk = &(wl->rfkill); + rfk->registered = 0; + rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN); + if (!rfk->rfkill) + goto out_error; snprintf(rfk->name, sizeof(rfk->name), "b43-%s", wiphy_name(wl->hw->wiphy)); - - rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN); - if (!rfk->rfkill) { - b43warn(wl, "Failed to allocate RF-kill button\n"); - return; - } rfk->rfkill->name = rfk->name; rfk->rfkill->state = RFKILL_STATE_ON; rfk->rfkill->data = dev; @@ -165,18 +127,45 @@ void b43_rfkill_alloc(struct b43_wldev *dev) rfk->rfkill->user_claim_unsupported = 1; rfk->poll_dev = input_allocate_polled_device(); - if (rfk->poll_dev) { - rfk->poll_dev->private = dev; - rfk->poll_dev->poll = b43_rfkill_poll; - rfk->poll_dev->poll_interval = 1000; /* msecs */ - } else - b43warn(wl, "Failed to allocate RF-kill polldev\n"); + if (!rfk->poll_dev) + goto err_free_rfk; + rfk->poll_dev->private = dev; + rfk->poll_dev->poll = b43_rfkill_poll; + rfk->poll_dev->poll_interval = 1000; /* msecs */ + + err = rfkill_register(rfk->rfkill); + if (err) + goto err_free_polldev; + err = input_register_polled_device(rfk->poll_dev); + if (err) + goto err_unreg_rfk; + + rfk->registered = 1; + + return; +err_unreg_rfk: + rfkill_unregister(rfk->rfkill); +err_free_polldev: + input_free_polled_device(rfk->poll_dev); + rfk->poll_dev = NULL; +err_free_rfk: + rfkill_free(rfk->rfkill); + rfk->rfkill = NULL; +out_error: + rfk->registered = 0; + b43warn(wl, "RF-kill button init failed\n"); } -void b43_rfkill_free(struct b43_wldev *dev) +void b43_rfkill_exit(struct b43_wldev *dev) { struct b43_rfkill *rfk = &(dev->wl->rfkill); + if (!rfk->registered) + return; + rfk->registered = 0; + + input_unregister_polled_device(rfk->poll_dev); + rfkill_unregister(rfk->rfkill); input_free_polled_device(rfk->poll_dev); rfk->poll_dev = NULL; rfkill_free(rfk->rfkill); diff --git a/drivers/net/wireless/b43/rfkill.h b/drivers/net/wireless/b43/rfkill.h index 29544e8c9e5f..adacf936d815 100644 --- a/drivers/net/wireless/b43/rfkill.h +++ b/drivers/net/wireless/b43/rfkill.h @@ -15,14 +15,14 @@ struct b43_rfkill { struct rfkill *rfkill; /* The poll device for the RFKILL input button */ struct input_polled_dev *poll_dev; + /* Did initialization succeed? Used for freeing. */ + bool registered; /* The unique name of this rfkill switch */ - char name[32]; + char name[sizeof("b43-phy4294967295")]; }; -/* All the init functions return void, because we are not interested +/* The init function returns void, because we are not interested * in failing the b43 init process when rfkill init failed. */ -void b43_rfkill_alloc(struct b43_wldev *dev); -void b43_rfkill_free(struct b43_wldev *dev); void b43_rfkill_init(struct b43_wldev *dev); void b43_rfkill_exit(struct b43_wldev *dev); @@ -36,12 +36,6 @@ struct b43_rfkill { /* empty */ }; -static inline void b43_rfkill_alloc(struct b43_wldev *dev) -{ -} -static inline void b43_rfkill_free(struct b43_wldev *dev) -{ -} static inline void b43_rfkill_init(struct b43_wldev *dev) { } diff --git a/drivers/net/wireless/b43legacy/debugfs.c b/drivers/net/wireless/b43legacy/debugfs.c index eefa6fb79685..619b4534ef09 100644 --- a/drivers/net/wireless/b43legacy/debugfs.c +++ b/drivers/net/wireless/b43legacy/debugfs.c @@ -124,7 +124,7 @@ static ssize_t shm_read_file(struct b43legacy_wldev *dev, char *buf, size_t bufs __le16 *le16buf = (__le16 *)buf; for (i = 0; i < 0x1000; i++) { - if (bufsize <= 0) + if (bufsize < sizeof(tmp)) break; tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, 2 * i); le16buf[i] = cpu_to_le16(tmp); diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index f0e56dfc9ecf..3bde1e9ab428 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2781,6 +2781,17 @@ static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev) if (b43legacy_status(dev) < B43legacy_STAT_STARTED) return; + + /* Disable and sync interrupts. We must do this before than + * setting the status to INITIALIZED, as the interrupt handler + * won't care about IRQs then. */ + spin_lock_irqsave(&wl->irq_lock, flags); + dev->irq_savedstate = b43legacy_interrupt_disable(dev, + B43legacy_IRQ_ALL); + b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK); /* flush */ + spin_unlock_irqrestore(&wl->irq_lock, flags); + b43legacy_synchronize_irq(dev); + b43legacy_set_status(dev, B43legacy_STAT_INITIALIZED); mutex_unlock(&wl->mutex); @@ -2791,14 +2802,6 @@ static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev) ieee80211_stop_queues(wl->hw); /* FIXME this could cause a deadlock */ - /* Disable and sync interrupts. */ - spin_lock_irqsave(&wl->irq_lock, flags); - dev->irq_savedstate = b43legacy_interrupt_disable(dev, - B43legacy_IRQ_ALL); - b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK); /* flush */ - spin_unlock_irqrestore(&wl->irq_lock, flags); - b43legacy_synchronize_irq(dev); - b43legacy_mac_suspend(dev); free_irq(dev->dev->irq, dev); b43legacydbg(wl, "Wireless interface stopped\n"); @@ -3332,7 +3335,7 @@ out_mutex_unlock: return err; } -void b43legacy_stop(struct ieee80211_hw *hw) +static void b43legacy_stop(struct ieee80211_hw *hw) { struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); struct b43legacy_wldev *dev = wl->current_dev; diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c index 7da3664b8515..fc876ba18572 100644 --- a/drivers/net/wireless/hostap/hostap_pci.c +++ b/drivers/net/wireless/hostap/hostap_pci.c @@ -444,7 +444,7 @@ static int prism2_pci_resume(struct pci_dev *pdev) MODULE_DEVICE_TABLE(pci, prism2_pci_id_table); -static struct pci_driver prism2_pci_drv_id = { +static struct pci_driver prism2_pci_driver = { .name = "hostap_pci", .id_table = prism2_pci_id_table, .probe = prism2_pci_probe, @@ -458,13 +458,13 @@ static struct pci_driver prism2_pci_drv_id = { static int __init init_prism2_pci(void) { - return pci_register_driver(&prism2_pci_drv_id); + return pci_register_driver(&prism2_pci_driver); } static void __exit exit_prism2_pci(void) { - pci_unregister_driver(&prism2_pci_drv_id); + pci_unregister_driver(&prism2_pci_driver); } diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 8d53d08b9691..fc6cdd8086c1 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -1267,7 +1267,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv) IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR); } - } while (i--); + } while (--i); /* Clear out any pending INTAs since we aren't supposed to have * interrupts enabled at this point... */ @@ -1339,7 +1339,7 @@ static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv) if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) break; - } while (i--); + } while (--i); priv->status &= ~STATUS_RESET_PENDING; diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 1cbbd96fdbde..be5cfd8402c7 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -912,6 +912,10 @@ static int wlan_cmd_set_boot2_ver(wlan_private * priv, return 0; } +/* + * Note: NEVER use libertas_queue_cmd() with addtail==0 other than for + * the command timer, because it does not account for queued commands. + */ void libertas_queue_cmd(wlan_adapter * adapter, struct cmd_ctrl_node *cmdnode, u8 addtail) { unsigned long flags; @@ -941,10 +945,11 @@ void libertas_queue_cmd(wlan_adapter * adapter, struct cmd_ctrl_node *cmdnode, u spin_lock_irqsave(&adapter->driver_lock, flags); - if (addtail) + if (addtail) { list_add_tail((struct list_head *)cmdnode, &adapter->cmdpendingq); - else + adapter->nr_cmd_pending++; + } else list_add((struct list_head *)cmdnode, &adapter->cmdpendingq); spin_unlock_irqrestore(&adapter->driver_lock, flags); @@ -1412,7 +1417,6 @@ int libertas_prepare_and_send_command(wlan_private * priv, cmdnode->cmdwaitqwoken = 0; libertas_queue_cmd(adapter, cmdnode, 1); - adapter->nr_cmd_pending++; wake_up_interruptible(&priv->waitq); if (wait_option & CMD_OPTION_WAITFORRSP) { diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 0360cad363a8..ec89dabc412c 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -148,11 +148,11 @@ static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 r { int i; - for (i = 0; i < 500; i++) { + for (i = 0; i < 1000; i++) { u8 val = if_cs_read8(card, addr); if (val == reg) return i; - udelay(100); + udelay(500); } return -ETIME; } @@ -878,6 +878,9 @@ static int if_cs_probe(struct pcmcia_device *p_dev) goto out3; } + /* Clear any interrupt cause that happend while sending + * firmware/initializing card */ + if_cs_write16(card, IF_CS_C_INT_CAUSE, IF_CS_C_IC_MASK); if_cs_enable_ints(card); /* And finally bring the card up */ diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index a8e17076e7de..b24425f74883 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -182,12 +182,14 @@ static int if_sdio_handle_data(struct if_sdio_card *card, goto out; } - skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE); + skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + NET_IP_ALIGN); if (!skb) { ret = -ENOMEM; goto out; } + skb_reserve(skb, NET_IP_ALIGN); + data = skb_put(skb, size); memcpy(data, buffer, size); diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 4a6a0bd01ff1..85ea8a8e658e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -196,6 +196,14 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, struct rt2x00_dev *rt2x00dev = hw->priv; struct interface *intf = &rt2x00dev->interface; + /* FIXME: Beaconing is broken in rt2x00. */ + if (conf->type == IEEE80211_IF_TYPE_IBSS || + conf->type == IEEE80211_IF_TYPE_AP) { + ERROR(rt2x00dev, + "rt2x00 does not support Adhoc or Master mode"); + return -EOPNOTSUPP; + } + /* * Don't allow interfaces to be added while * either the device has disappeared or when diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index 4bd14b331862..88efe1bae58f 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -2735,16 +2735,8 @@ static int strip_ioctl(struct tty_struct *tty, struct file *file, return -EFAULT; return set_mac_address(strip_info, &addr); } - /* - * Allow stty to read, but not set, the serial port - */ - - case TCGETS: - case TCGETA: - return n_tty_ioctl(tty, file, cmd, arg); - break; default: - return -ENOIOCTLCMD; + return tty_mode_ioctl(tty, file, cmd, arg); break; } return 0; diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c index 78277a118b67..8e8c8b8e81ee 100644 --- a/drivers/rtc/rtc-sh.c +++ b/drivers/rtc/rtc-sh.c @@ -351,8 +351,10 @@ static int sh_rtc_read_time(struct device *dev, struct rtc_time *tm) tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon + 1, tm->tm_year, tm->tm_wday); - if (rtc_valid_tm(tm) < 0) + if (rtc_valid_tm(tm) < 0) { dev_err(dev, "invalid date\n"); + rtc_time_to_tm(0, tm); + } return 0; } @@ -588,7 +590,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev) rtc->rtc_dev = rtc_device_register("sh", &pdev->dev, &sh_rtc_ops, THIS_MODULE); - if (IS_ERR(rtc)) { + if (IS_ERR(rtc->rtc_dev)) { ret = PTR_ERR(rtc->rtc_dev); goto err_badmap; } diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index e89ae29645d6..d24621ce799a 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -77,7 +77,6 @@ # define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ -# define SCI_NPORTS 2 # define SCIF_ORER 0x0001 /* overrun error bit */ # define PACR 0xa4050100 # define PBCR 0xa4050102 @@ -102,12 +101,6 @@ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCIF_ONLY -#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) -# define SCSPTR1 0xffe00020 /* 16 bit SCIF */ -# define SCSPTR2 0xffe80020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) # include <asm/hardware.h> # define SCIF_BASE_ADDR 0x01030000 @@ -116,8 +109,7 @@ # define SCIF_LSR2_OFFS 0x0000024 # define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */ # define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, - TE=1,RE=1,REIE=1 */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */ # define SCIF_ONLY #elif defined(CONFIG_H83007) || defined(CONFIG_H83068) # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ @@ -577,15 +569,6 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ return 1; } -#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR1)&0x0001 ? 1 : 0; /* SCIF */ - else - return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ - -} #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) static inline int sci_rxd_in(struct uart_port *port) { diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index dfef83f14960..a85f2d31a686 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -329,12 +329,14 @@ static struct uart_ops ulite_ops = { static void ulite_console_wait_tx(struct uart_port *port) { int i; + u8 val; - /* wait up to 10ms for the character(s) to be sent */ - for (i = 0; i < 10000; i++) { - if (readb(port->membase + ULITE_STATUS) & ULITE_STATUS_TXEMPTY) + /* Spin waiting for TX fifo to have space available */ + for (i = 0; i < 100000; i++) { + val = readb(port->membase + ULITE_STATUS); + if ((val & ULITE_STATUS_TXFULL) == 0) break; - udelay(1); + cpu_relax(); } } diff --git a/drivers/sh/superhyway/superhyway.c b/drivers/sh/superhyway/superhyway.c index 7d873b3b0513..4d0282b821b5 100644 --- a/drivers/sh/superhyway/superhyway.c +++ b/drivers/sh/superhyway/superhyway.c @@ -107,16 +107,17 @@ int superhyway_add_devices(struct superhyway_bus *bus, static int __init superhyway_init(void) { struct superhyway_bus *bus; - int ret = 0; + int ret; - device_register(&superhyway_bus_device); + ret = device_register(&superhyway_bus_device); + if (unlikely(ret)) + return ret; for (bus = superhyway_channels; bus->ops; bus++) ret |= superhyway_scan_bus(bus); return ret; } - postcore_initcall(superhyway_init); static const struct superhyway_device_id * diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c index 5fb8675e0d6b..d0e4cb618269 100644 --- a/drivers/video/cyber2000fb.c +++ b/drivers/video/cyber2000fb.c @@ -874,6 +874,8 @@ static int cyber2000fb_set_par(struct fb_info *info) default: BUG(); } + break; + case 24:/* TRUECOLOUR, 16m */ hw.co_pixfmt = CO_PIXFMT_24BPP; hw.width *= 3; diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c index 58bf3f5cdbe2..e9923ca9c2d9 100644 --- a/fs/dlm/lowcomms.c +++ b/fs/dlm/lowcomms.c @@ -1062,7 +1062,7 @@ static int sctp_listen_for_all(void) subscribe.sctp_shutdown_event = 1; subscribe.sctp_partial_delivery_event = 1; - result = kernel_setsockopt(sock, SOL_SOCKET, SO_RCVBUF, + result = kernel_setsockopt(sock, SOL_SOCKET, SO_RCVBUFFORCE, (char *)&bufsize, sizeof(bufsize)); if (result) log_print("Error increasing buffer space on socket %d", result); @@ -1454,10 +1454,6 @@ int dlm_lowcomms_start(void) if (!con_cache) goto out; - /* Set some sysctl minima */ - if (sysctl_rmem_max < NEEDED_RMEM) - sysctl_rmem_max = NEEDED_RMEM; - /* Start listening */ if (dlm_config.ci_protocol == 0) error = tcp_listen_for_all(); diff --git a/fs/ioprio.c b/fs/ioprio.c index d6ff77e8e7ec..e4e01bc7f338 100644 --- a/fs/ioprio.c +++ b/fs/ioprio.c @@ -78,6 +78,10 @@ asmlinkage long sys_ioprio_set(int which, int who, int ioprio) if (!capable(CAP_SYS_ADMIN)) return -EPERM; break; + case IOPRIO_CLASS_NONE: + if (data) + return -EINVAL; + break; default: return -EINVAL; } diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index 4ba7f0bdc248..ce62c152823d 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -3946,7 +3946,7 @@ static int __ocfs2_mark_extent_written(struct inode *inode, struct ocfs2_merge_ctxt ctxt; struct ocfs2_extent_list *rightmost_el; - if (!rec->e_flags & OCFS2_EXT_UNWRITTEN) { + if (!(rec->e_flags & OCFS2_EXT_UNWRITTEN)) { ret = -EIO; mlog_errno(ret); goto out; diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index c69c1b300155..556e34ccb005 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -729,6 +729,27 @@ static void ocfs2_clear_page_regions(struct page *page, } /* + * Nonsparse file systems fully allocate before we get to the write + * code. This prevents ocfs2_write() from tagging the write as an + * allocating one, which means ocfs2_map_page_blocks() might try to + * read-in the blocks at the tail of our file. Avoid reading them by + * testing i_size against each block offset. + */ +static int ocfs2_should_read_blk(struct inode *inode, struct page *page, + unsigned int block_start) +{ + u64 offset = page_offset(page) + block_start; + + if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb))) + return 1; + + if (i_size_read(inode) > offset) + return 1; + + return 0; +} + +/* * Some of this taken from block_prepare_write(). We already have our * mapping by now though, and the entire write will be allocating or * it won't, so not much need to use BH_New. @@ -781,6 +802,7 @@ int ocfs2_map_page_blocks(struct page *page, u64 *p_blkno, set_buffer_uptodate(bh); } else if (!buffer_uptodate(bh) && !buffer_delay(bh) && !buffer_new(bh) && + ocfs2_should_read_blk(inode, page, block_start) && (block_start < from || block_end > to)) { ll_rw_block(READ, 1, &bh); *wait_bh++=bh; diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index 9cc7c0418b70..f02ccb34604d 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -267,7 +267,7 @@ static struct bio *o2hb_setup_one_bio(struct o2hb_region *reg, current_page = cs / spp; page = reg->hr_slot_data[current_page]; - vec_len = min(PAGE_CACHE_SIZE, + vec_len = min(PAGE_CACHE_SIZE - vec_start, (max_slots-cs) * (PAGE_CACHE_SIZE/spp) ); mlog(ML_HB_BIO, "page %d, vec_len = %u, vec_start = %u\n", diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c index 3094ddb7a254..1957a5ed219e 100644 --- a/fs/ocfs2/dcache.c +++ b/fs/ocfs2/dcache.c @@ -318,9 +318,9 @@ out_attach: static void ocfs2_drop_dentry_lock(struct ocfs2_super *osb, struct ocfs2_dentry_lock *dl) { + iput(dl->dl_inode); ocfs2_simple_drop_lockres(osb, &dl->dl_lockres); ocfs2_lock_res_free(&dl->dl_lockres); - iput(dl->dl_inode); kfree(dl); } diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index 6a2f143e269c..63b28fdceb4a 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -208,9 +208,9 @@ out: return NULL; } -struct buffer_head *ocfs2_find_entry_el(const char *name, int namelen, - struct inode *dir, - struct ocfs2_dir_entry **res_dir) +static struct buffer_head *ocfs2_find_entry_el(const char *name, int namelen, + struct inode *dir, + struct ocfs2_dir_entry **res_dir) { struct super_block *sb; struct buffer_head *bh_use[NAMEI_RA_SIZE]; diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 41c76ff2fcfb..4e97dcceaf8f 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -670,7 +670,7 @@ static inline void ocfs2_generic_handle_attach_action(struct ocfs2_lock_res *loc { mlog_entry_void(); - BUG_ON((!lockres->l_flags & OCFS2_LOCK_BUSY)); + BUG_ON((!(lockres->l_flags & OCFS2_LOCK_BUSY))); BUG_ON(lockres->l_flags & OCFS2_LOCK_ATTACHED); if (lockres->l_requested > LKM_NLMODE && @@ -980,18 +980,6 @@ again: goto unlock; } - if (!(lockres->l_flags & OCFS2_LOCK_ATTACHED)) { - /* lock has not been created yet. */ - spin_unlock_irqrestore(&lockres->l_lock, flags); - - ret = ocfs2_lock_create(osb, lockres, LKM_NLMODE, 0); - if (ret < 0) { - mlog_errno(ret); - goto out; - } - goto again; - } - if (lockres->l_flags & OCFS2_LOCK_BLOCKED && !ocfs2_may_continue_on_blocked_lock(lockres, level)) { /* is the lock is currently blocked on behalf of @@ -1006,7 +994,14 @@ again: mlog(ML_ERROR, "lockres %s has action %u pending\n", lockres->l_name, lockres->l_action); - lockres->l_action = OCFS2_AST_CONVERT; + if (!(lockres->l_flags & OCFS2_LOCK_ATTACHED)) { + lockres->l_action = OCFS2_AST_ATTACH; + lkm_flags &= ~LKM_CONVERT; + } else { + lockres->l_action = OCFS2_AST_CONVERT; + lkm_flags |= LKM_CONVERT; + } + lockres->l_requested = level; lockres_or_flags(lockres, OCFS2_LOCK_BUSY); spin_unlock_irqrestore(&lockres->l_lock, flags); @@ -1021,7 +1016,7 @@ again: status = dlmlock(osb->dlm, level, &lockres->l_lksb, - lkm_flags|LKM_CONVERT, + lkm_flags, lockres->l_name, OCFS2_LOCK_ID_MAX_LEN - 1, ocfs2_locking_ast, diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index f92fe91ff260..bbac7cd33e0b 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1891,9 +1891,11 @@ static ssize_t ocfs2_file_aio_write(struct kiocb *iocb, ssize_t written = 0; size_t ocount; /* original count */ size_t count; /* after file limit checks */ - loff_t *ppos = &iocb->ki_pos; + loff_t old_size, *ppos = &iocb->ki_pos; + u32 old_clusters; struct file *file = iocb->ki_filp; struct inode *inode = file->f_path.dentry->d_inode; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); mlog_entry("(0x%p, %u, '%.*s')\n", file, (unsigned int)nr_segs, @@ -1949,6 +1951,13 @@ relock: goto relock; } + /* + * To later detect whether a journal commit for sync writes is + * necessary, we sample i_size, and cluster count here. + */ + old_size = i_size_read(inode); + old_clusters = OCFS2_I(inode)->ip_clusters; + /* communicate with ocfs2_dio_end_io */ ocfs2_iocb_set_rw_locked(iocb, rw_level); @@ -1978,6 +1987,21 @@ out_dio: /* buffered aio wouldn't have proper lock coverage today */ BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT)); + if ((file->f_flags & O_SYNC && !direct_io) || IS_SYNC(inode)) { + /* + * The generic write paths have handled getting data + * to disk, but since we don't make use of the dirty + * inode list, a manual journal commit is necessary + * here. + */ + if (old_size != i_size_read(inode) || + old_clusters != OCFS2_I(inode)->ip_clusters) { + ret = journal_force_commit(osb->journal->j_journal); + if (ret < 0) + written = ret; + } + } + /* * deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io * function pointer which is called when o_direct io completes so that diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index 729259016c18..989ac2718587 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -1105,9 +1105,16 @@ static int ocfs2_rename(struct inode *old_dir, goto bail; } - if (!new_de && new_inode) - mlog(ML_ERROR, "inode %lu does not exist in it's parent " - "directory!", new_inode->i_ino); + if (!new_de && new_inode) { + /* + * Target was unlinked by another node while we were + * waiting to get to ocfs2_rename(). There isn't + * anything we can do here to help the situation, so + * bubble up the appropriate error. + */ + status = -ENOENT; + goto bail; + } /* In case we need to overwrite an existing file, we blow it * away first */ diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c index 749def054a34..153554cf5575 100644 --- a/fs/proc/proc_net.c +++ b/fs/proc/proc_net.c @@ -26,13 +26,6 @@ #include "internal.h" -struct proc_dir_entry *proc_net_create(struct net *net, - const char *name, mode_t mode, get_info_t *get_info) -{ - return create_proc_info_entry(name,mode, net->proc_net, get_info); -} -EXPORT_SYMBOL_GPL(proc_net_create); - struct proc_dir_entry *proc_net_fops_create(struct net *net, const char *name, mode_t mode, const struct file_operations *fops) { diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index fb90b421f31c..ede377ec9147 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -231,7 +231,7 @@ extern int init_atu; IOP3XX_PCI_IO_WINDOW_SIZE - 1) #define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\ IOP3XX_PCI_IO_WINDOW_SIZE - 1) -#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) addr -\ +#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\ IOP3XX_PCI_LOWER_IO_PA) +\ IOP3XX_PCI_LOWER_IO_VA) diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h index d2e8171d1d4e..5e0182485d8c 100644 --- a/include/asm-arm/pgtable.h +++ b/include/asm-arm/pgtable.h @@ -249,7 +249,7 @@ extern struct page *empty_zero_page; #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) #define set_pte_at(mm,addr,ptep,pteval) do { \ - set_pte_ext(ptep, pteval, (addr) >= PAGE_OFFSET ? 0 : PTE_EXT_NG); \ + set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \ } while (0) /* diff --git a/include/asm-frv/irq.h b/include/asm-frv/irq.h index 8fefd6b827aa..3a66ebd754bd 100644 --- a/include/asm-frv/irq.h +++ b/include/asm-frv/irq.h @@ -12,9 +12,6 @@ #ifndef _ASM_IRQ_H_ #define _ASM_IRQ_H_ -/* this number is used when no interrupt has been assigned */ -#define NO_IRQ (-1) - #define NR_IRQS 48 #define IRQ_BASE_CPU (0 * 16) #define IRQ_BASE_FPGA (1 * 16) diff --git a/include/asm-ia64/pal.h b/include/asm-ia64/pal.h index abfcb3a2588f..8a695d3407d2 100644 --- a/include/asm-ia64/pal.h +++ b/include/asm-ia64/pal.h @@ -1379,10 +1379,11 @@ struct pal_features_s; static inline s64 ia64_pal_proc_get_features (u64 *features_avail, u64 *features_status, - u64 *features_control) + u64 *features_control, + u64 features_set) { struct ia64_pal_retval iprv; - PAL_CALL_PHYS(iprv, PAL_PROC_GET_FEATURES, 0, 0, 0); + PAL_CALL_PHYS(iprv, PAL_PROC_GET_FEATURES, 0, features_set, 0); if (iprv.status == 0) { *features_avail = iprv.v0; *features_status = iprv.v1; diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index 86a54a4a8a2a..fea2d8ff1e73 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -11,6 +11,11 @@ extern unsigned long va_to_phys(unsigned long address); extern pte_t *va_to_pte(unsigned long address); extern unsigned long ioremap_bot, ioremap_base; + +#ifdef CONFIG_44x +extern int icache_44x_need_flush; +#endif + #endif /* __ASSEMBLY__ */ /* @@ -562,6 +567,10 @@ static inline unsigned long pte_update(pte_t *p, unsigned long clr, : "=&r" (old), "=&r" (tmp), "=m" (*p) : "r" (p), "r" (clr), "r" (set), "m" (*p) : "cc" ); +#ifdef CONFIG_44x + if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) + icache_44x_need_flush = 1; +#endif return old; } #else @@ -582,6 +591,10 @@ static inline unsigned long long pte_update(pte_t *p, unsigned long clr, : "=&r" (old), "=&r" (tmp), "=m" (*p) : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p) : "cc" ); +#ifdef CONFIG_44x + if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) + icache_44x_need_flush = 1; +#endif return old; } #endif diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h index cc6d87228258..11d5383b2f09 100644 --- a/include/asm-powerpc/systbl.h +++ b/include/asm-powerpc/systbl.h @@ -308,8 +308,8 @@ COMPAT_SYS_SPU(move_pages) SYSCALL_SPU(getcpu) COMPAT_SYS(epoll_pwait) COMPAT_SYS_SPU(utimensat) -COMPAT_SYS(fallocate) COMPAT_SYS_SPU(signalfd) COMPAT_SYS_SPU(timerfd) SYSCALL_SPU(eventfd) COMPAT_SYS_SPU(sync_file_range2) +COMPAT_SYS(fallocate) diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h index f05895522f7f..780f82642756 100644 --- a/include/asm-powerpc/time.h +++ b/include/asm-powerpc/time.h @@ -176,25 +176,31 @@ static inline unsigned int get_dec(void) #endif } +/* + * Note: Book E and 4xx processors differ from other PowerPC processors + * in when the decrementer generates its interrupt: on the 1 to 0 + * transition for Book E/4xx, but on the 0 to -1 transition for others. + */ static inline void set_dec(int val) { #if defined(CONFIG_40x) mtspr(SPRN_PIT, val); #elif defined(CONFIG_8xx_CPU6) - set_dec_cpu6(val); + set_dec_cpu6(val - 1); #else +#ifndef CONFIG_BOOKE + --val; +#endif #ifdef CONFIG_PPC_ISERIES - int cur_dec; - if (firmware_has_feature(FW_FEATURE_ISERIES) && get_lppaca()->shared_proc) { get_lppaca()->virtual_decr = val; - cur_dec = get_dec(); - if (cur_dec > val) + if (get_dec() > val) HvCall_setVirtualDecr(); - } else + return; + } #endif - mtspr(SPRN_DEC, val); + mtspr(SPRN_DEC, val); #endif /* not 40x or 8xx_CPU6 */ } diff --git a/include/asm-powerpc/tlbflush.h b/include/asm-powerpc/tlbflush.h index b6b036ccee34..e7b4c0d298ae 100644 --- a/include/asm-powerpc/tlbflush.h +++ b/include/asm-powerpc/tlbflush.h @@ -1,5 +1,6 @@ #ifndef _ASM_POWERPC_TLBFLUSH_H #define _ASM_POWERPC_TLBFLUSH_H + /* * TLB flushing: * @@ -16,9 +17,6 @@ */ #ifdef __KERNEL__ -struct mm_struct; -struct vm_area_struct; - #if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE) /* * TLB flushing for software loaded TLB chips @@ -28,7 +26,9 @@ struct vm_area_struct; * specific tlbie's */ -extern void _tlbie(unsigned long address); +#include <linux/mm.h> + +extern void _tlbie(unsigned long address, unsigned int pid); #if defined(CONFIG_40x) || defined(CONFIG_8xx) #define _tlbia() asm volatile ("tlbia; sync" : : : "memory") @@ -44,13 +44,13 @@ static inline void flush_tlb_mm(struct mm_struct *mm) static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) { - _tlbie(vmaddr); + _tlbie(vmaddr, vma->vm_mm->context.id); } static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long vmaddr) { - _tlbie(vmaddr); + _tlbie(vmaddr, vma->vm_mm->context.id); } static inline void flush_tlb_range(struct vm_area_struct *vma, diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h index aa558da08471..b91246153b7e 100644 --- a/include/asm-sh/cacheflush.h +++ b/include/asm-sh/cacheflush.h @@ -43,21 +43,31 @@ extern void __flush_purge_region(void *start, int size); extern void __flush_invalidate_region(void *start, int size); #endif -#define flush_cache_vmap(start, end) flush_cache_all() -#define flush_cache_vunmap(start, end) flush_cache_all() +#ifdef CONFIG_CPU_SH4 +extern void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len); -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +extern void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len); +#else +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ do { \ flush_cache_page(vma, vaddr, page_to_pfn(page));\ memcpy(dst, src, len); \ flush_icache_user_range(vma, page, vaddr, len); \ } while (0) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ do { \ flush_cache_page(vma, vaddr, page_to_pfn(page));\ memcpy(dst, src, len); \ } while (0) +#endif + +#define flush_cache_vmap(start, end) flush_cache_all() +#define flush_cache_vunmap(start, end) flush_cache_all() #define HAVE_ARCH_UNMAPPED_AREA diff --git a/include/asm-sh/cpu-sh3/timer.h b/include/asm-sh/cpu-sh3/timer.h index 3880ce047fe0..7b795ac5477c 100644 --- a/include/asm-sh/cpu-sh3/timer.h +++ b/include/asm-sh/cpu-sh3/timer.h @@ -23,8 +23,7 @@ * --------------------------------------------------------------------------- */ -#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \ - !defined(CONFIG_CPU_SUBTYPE_SH7727) +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) #define TMU_TOCR 0xfffffe90 /* Byte access */ #endif @@ -58,8 +57,7 @@ #define TMU2_TCOR 0xfffffeac /* Long access */ #define TMU2_TCNT 0xfffffeb0 /* Long access */ #define TMU2_TCR 0xfffffeb4 /* Word access */ -#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \ - !defined(CONFIG_CPU_SUBTYPE_SH7727) +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) #define TMU2_TCPR2 0xfffffeb8 /* Long access */ #endif #endif diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index 3aa8b07da47d..d00a8fde7c7f 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -73,10 +73,13 @@ extern void copy_page_nommu(void *to, void *from); #if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \ (defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)) struct page; -extern void clear_user_page(void *to, unsigned long address, struct page *pg); -extern void copy_user_page(void *to, void *from, unsigned long address, struct page *pg); -extern void __clear_user_page(void *to, void *orig_to); -extern void __copy_user_page(void *to, void *from, void *orig_to); +struct vm_area_struct; +extern void clear_user_page(void *to, unsigned long address, struct page *page); +#ifdef CONFIG_CPU_SH4 +extern void copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); +#define __HAVE_ARCH_COPY_USER_HIGHPAGE +#endif #else #define clear_user_page(page, vaddr, pg) clear_page(page) #define copy_user_page(to, from, vaddr, pg) copy_page(to, from) diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index 0b1d7c665659..8f1e8be8d15d 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -322,7 +322,9 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define PAGE_KERNEL __pgprot(0) #define PAGE_KERNEL_NOCACHE __pgprot(0) #define PAGE_KERNEL_RO __pgprot(0) -#define PAGE_KERNEL_PCC __pgprot(0) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(0) #endif #endif /* __ASSEMBLY__ */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index ab0028db645a..fda68480f377 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -49,7 +49,7 @@ enum cpu_type { /* SH-4 types */ CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R, - CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501, + CPU_SH7760, CPU_SH4_202, CPU_SH4_501, /* SH-4A types */ CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3, diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h index ed358a376e6e..b9789c8b4d15 100644 --- a/include/asm-sh/ptrace.h +++ b/include/asm-sh/ptrace.h @@ -42,9 +42,6 @@ #define REG_FPSCR 55 #define REG_FPUL 56 -/* options set using PTRACE_SETOPTIONS */ -#define PTRACE_O_TRACESYSGOOD 0x00000001 - /* * This struct defines the way the registers are stored on the * kernel stack during a system call or other kernel entry. diff --git a/include/asm-sh/vga.h b/include/asm-sh/vga.h new file mode 100644 index 000000000000..06a5de8ace1a --- /dev/null +++ b/include/asm-sh/vga.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_VGA_H +#define __ASM_SH_VGA_H + +/* Stupid drivers. */ + +#endif /* __ASM_SH_VGA_H */ diff --git a/include/asm-sh64/ptrace.h b/include/asm-sh64/ptrace.h index a6d4da519db6..c424f80e3ae0 100644 --- a/include/asm-sh64/ptrace.h +++ b/include/asm-sh64/ptrace.h @@ -32,6 +32,4 @@ struct pt_regs { extern void show_regs(struct pt_regs *); #endif -#define PTRACE_O_TRACESYSGOOD 0x00000001 - #endif /* __ASM_SH64_PTRACE_H */ diff --git a/include/asm-sparc64/vio.h b/include/asm-sparc64/vio.h index f7417e91b170..d4de32f0f8af 100644 --- a/include/asm-sparc64/vio.h +++ b/include/asm-sparc64/vio.h @@ -8,6 +8,7 @@ #include <linux/spinlock.h> #include <linux/completion.h> #include <linux/list.h> +#include <linux/log2.h> #include <asm/ldc.h> #include <asm/mdesc.h> @@ -257,8 +258,7 @@ static inline void *vio_dring_entry(struct vio_dring_state *dr, static inline u32 vio_dring_avail(struct vio_dring_state *dr, unsigned int ring_size) { - /* Ensure build-time power-of-2. */ - BUILD_BUG_ON(ring_size & (ring_size - 1)); + BUILD_BUG_ON(!is_power_of_2(ring_size)); return (dr->pending - ((dr->prod - dr->cons) & (ring_size - 1))); diff --git a/include/asm-x86/mach-voyager/setup_arch.h b/include/asm-x86/mach-voyager/setup_arch.h index 84d01ad33459..1710ae10eb67 100644 --- a/include/asm-x86/mach-voyager/setup_arch.h +++ b/include/asm-x86/mach-voyager/setup_arch.h @@ -1,5 +1,7 @@ #include <asm/voyager.h> -#define VOYAGER_BIOS_INFO ((struct voyager_bios_info *)(PARAM+0x40)) +#include <asm/setup_32.h> +#define VOYAGER_BIOS_INFO ((struct voyager_bios_info *) \ + (&boot_params.apm_bios_info)) /* Hook to call BIOS initialisation function */ diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 8396db24d019..d18ee67b40f8 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -697,6 +697,7 @@ extern int blk_execute_rq(struct request_queue *, struct gendisk *, extern void blk_execute_rq_nowait(struct request_queue *, struct gendisk *, struct request *, int, rq_end_io_fn *); extern int blk_verify_command(unsigned char *, int); +extern void blk_unplug(struct request_queue *q); static inline struct request_queue *bdev_get_queue(struct block_device *bdev) { diff --git a/include/linux/mroute.h b/include/linux/mroute.h index 7da2cee8e132..35a8277ec1bd 100644 --- a/include/linux/mroute.h +++ b/include/linux/mroute.h @@ -128,6 +128,18 @@ struct igmpmsg #ifdef __KERNEL__ #include <net/sock.h> +#ifdef CONFIG_IP_MROUTE +static inline int ip_mroute_opt(int opt) +{ + return (opt >= MRT_BASE) && (opt <= MRT_BASE + 10); +} +#else +static inline int ip_mroute_opt(int opt) +{ + return 0; +} +#endif + extern int ip_mroute_setsockopt(struct sock *, int, char __user *, int); extern int ip_mroute_getsockopt(struct sock *, int, char __user *, int __user *); extern int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg); diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild index f2eaea2234ec..b87e83a5e070 100644 --- a/include/linux/netfilter/Kbuild +++ b/include/linux/netfilter/Kbuild @@ -4,25 +4,28 @@ header-y += nfnetlink_conntrack.h header-y += nfnetlink_log.h header-y += nfnetlink_queue.h header-y += xt_CLASSIFY.h +header-y += xt_CONNMARK.h +header-y += xt_CONNSECMARK.h +header-y += xt_DSCP.h +header-y += xt_MARK.h +header-y += xt_NFLOG.h +header-y += xt_NFQUEUE.h +header-y += xt_SECMARK.h +header-y += xt_TCPMSS.h header-y += xt_comment.h header-y += xt_connbytes.h header-y += xt_connmark.h -header-y += xt_CONNMARK.h header-y += xt_conntrack.h header-y += xt_dccp.h header-y += xt_dscp.h -header-y += xt_DSCP.h header-y += xt_esp.h -header-y += xt_helper.h header-y += xt_hashlimit.h +header-y += xt_helper.h header-y += xt_length.h header-y += xt_limit.h header-y += xt_mac.h header-y += xt_mark.h -header-y += xt_MARK.h header-y += xt_multiport.h -header-y += xt_NFQUEUE.h -header-y += xt_NFLOG.h header-y += xt_pkttype.h header-y += xt_policy.h header-y += xt_realm.h @@ -32,9 +35,6 @@ header-y += xt_statistic.h header-y += xt_string.h header-y += xt_tcpmss.h header-y += xt_tcpudp.h -header-y += xt_SECMARK.h -header-y += xt_CONNSECMARK.h -header-y += xt_TCPMSS.h unifdef-y += nf_conntrack_common.h unifdef-y += nf_conntrack_ftp.h diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild index 7185792b900f..3a7105bb8f33 100644 --- a/include/linux/netfilter_ipv4/Kbuild +++ b/include/linux/netfilter_ipv4/Kbuild @@ -1,47 +1,47 @@ -header-y += ipt_addrtype.h -header-y += ipt_ah.h header-y += ipt_CLASSIFY.h header-y += ipt_CLUSTERIP.h +header-y += ipt_CONNMARK.h +header-y += ipt_DSCP.h +header-y += ipt_ECN.h +header-y += ipt_LOG.h +header-y += ipt_MARK.h +header-y += ipt_NFQUEUE.h +header-y += ipt_REJECT.h +header-y += ipt_SAME.h +header-y += ipt_TCPMSS.h +header-y += ipt_TOS.h +header-y += ipt_TTL.h +header-y += ipt_ULOG.h +header-y += ipt_addrtype.h +header-y += ipt_ah.h header-y += ipt_comment.h header-y += ipt_connbytes.h header-y += ipt_connmark.h -header-y += ipt_CONNMARK.h header-y += ipt_conntrack.h header-y += ipt_dccp.h header-y += ipt_dscp.h -header-y += ipt_DSCP.h header-y += ipt_ecn.h -header-y += ipt_ECN.h header-y += ipt_esp.h header-y += ipt_hashlimit.h header-y += ipt_helper.h header-y += ipt_iprange.h header-y += ipt_length.h header-y += ipt_limit.h -header-y += ipt_LOG.h header-y += ipt_mac.h header-y += ipt_mark.h -header-y += ipt_MARK.h header-y += ipt_multiport.h -header-y += ipt_NFQUEUE.h header-y += ipt_owner.h header-y += ipt_physdev.h header-y += ipt_pkttype.h header-y += ipt_policy.h header-y += ipt_realm.h header-y += ipt_recent.h -header-y += ipt_REJECT.h -header-y += ipt_SAME.h header-y += ipt_sctp.h header-y += ipt_state.h header-y += ipt_string.h header-y += ipt_tcpmss.h -header-y += ipt_TCPMSS.h header-y += ipt_tos.h -header-y += ipt_TOS.h header-y += ipt_ttl.h -header-y += ipt_TTL.h -header-y += ipt_ULOG.h unifdef-y += ip_queue.h unifdef-y += ip_tables.h diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild index 9dd978d149ff..8887a5fcd1d0 100644 --- a/include/linux/netfilter_ipv6/Kbuild +++ b/include/linux/netfilter_ipv6/Kbuild @@ -14,8 +14,8 @@ header-y += ip6t_mark.h header-y += ip6t_multiport.h header-y += ip6t_opts.h header-y += ip6t_owner.h -header-y += ip6t_policy.h header-y += ip6t_physdev.h +header-y += ip6t_policy.h header-y += ip6t_rt.h unifdef-y += ip6_tables.h diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 7c1f3b1d2ee5..d5bfaba595c7 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -192,7 +192,7 @@ extern int netlink_unregister_notifier(struct notifier_block *nb); /* finegrained unicast helpers: */ struct sock *netlink_getsockbyfilp(struct file *filp); int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock, - long timeo, struct sock *ssk); + long *timeo, struct sock *ssk); void netlink_detachskb(struct sock *sk, struct sk_buff *skb); int netlink_sendskb(struct sock *sk, struct sk_buff *skb); diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 1ff461672060..1273c6ec535c 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -196,8 +196,6 @@ static inline struct proc_dir_entry *create_proc_info_entry(const char *name, return res; } -extern struct proc_dir_entry *proc_net_create(struct net *net, - const char *name, mode_t mode, get_info_t *get_info); extern struct proc_dir_entry *proc_net_fops_create(struct net *net, const char *name, mode_t mode, const struct file_operations *fops); extern void proc_net_remove(struct net *net, const char *name); @@ -208,7 +206,6 @@ extern void proc_net_remove(struct net *net, const char *name); #define proc_bus NULL #define proc_net_fops_create(net, name, mode, fops) ({ (void)(mode), NULL; }) -#define proc_net_create(net, name, mode, info) ({ (void)(mode), NULL; }) static inline void proc_net_remove(struct net *net, const char *name) {} static inline void proc_flush_task(struct task_struct *task) diff --git a/include/linux/sched.h b/include/linux/sched.h index 155d7438f7ad..ee800e7a70de 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -254,6 +254,7 @@ long io_schedule_timeout(long timeout); extern void cpu_init (void); extern void trap_init(void); +extern void account_process_tick(struct task_struct *task, int user); extern void update_process_times(int user); extern void scheduler_tick(void); @@ -862,7 +863,6 @@ struct sched_entity { struct load_weight load; /* for load-balancing */ struct rb_node run_node; unsigned int on_rq; - int peer_preempt; u64 exec_start; u64 sum_exec_runtime; @@ -1460,12 +1460,17 @@ extern void sched_idle_next(void); #ifdef CONFIG_SCHED_DEBUG extern unsigned int sysctl_sched_latency; -extern unsigned int sysctl_sched_nr_latency; +extern unsigned int sysctl_sched_min_granularity; extern unsigned int sysctl_sched_wakeup_granularity; extern unsigned int sysctl_sched_batch_wakeup_granularity; extern unsigned int sysctl_sched_child_runs_first; extern unsigned int sysctl_sched_features; extern unsigned int sysctl_sched_migration_cost; +extern unsigned int sysctl_sched_nr_migrate; + +int sched_nr_latency_handler(struct ctl_table *table, int write, + struct file *file, void __user *buffer, size_t *length, + loff_t *ppos); #endif extern unsigned int sysctl_sched_compat_yield; @@ -1983,6 +1988,14 @@ static inline void inc_syscw(struct task_struct *tsk) } #endif +#ifdef CONFIG_SMP +void migration_init(void); +#else +static inline void migration_init(void) +{ +} +#endif + #endif /* __KERNEL__ */ #endif diff --git a/include/linux/smp.h b/include/linux/smp.h index 259a13c3bd98..c25e66bcecf3 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -84,11 +84,12 @@ void smp_prepare_boot_cpu(void); * These macros fold the SMP functionality into a single CPU system */ #define raw_smp_processor_id() 0 -static inline int up_smp_call_function(void) +static inline int up_smp_call_function(void (*func)(void *), void *info) { return 0; } -#define smp_call_function(func,info,retry,wait) (up_smp_call_function()) +#define smp_call_function(func, info, retry, wait) \ + (up_smp_call_function(func, info)) #define on_each_cpu(func,info,retry,wait) \ ({ \ local_irq_disable(); \ @@ -107,6 +108,8 @@ static inline void smp_send_reschedule(int cpu) { } local_irq_enable(); \ 0; \ }) +#define smp_call_function_mask(mask, func, info, wait) \ + (up_smp_call_function(func, info)) #endif /* !SMP */ diff --git a/include/linux/tty.h b/include/linux/tty.h index 56164d7ba0ad..c555f5442bd7 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -332,7 +332,9 @@ extern void tty_ldisc_flush(struct tty_struct *tty); extern int tty_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); - +extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg); extern dev_t tty_devnum(struct tty_struct *tty); extern void proc_clear_tty(struct task_struct *p); extern struct tty_struct *get_current_tty(void); diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h index 4427dcd1e53a..8461cda37490 100644 --- a/include/net/inet_hashtables.h +++ b/include/net/inet_hashtables.h @@ -37,7 +37,6 @@ * I'll experiment with dynamic table growth later. */ struct inet_ehash_bucket { - rwlock_t lock; struct hlist_head chain; struct hlist_head twchain; }; @@ -100,6 +99,9 @@ struct inet_hashinfo { * TIME_WAIT sockets use a separate chain (twchain). */ struct inet_ehash_bucket *ehash; + rwlock_t *ehash_locks; + unsigned int ehash_size; + unsigned int ehash_locks_mask; /* Ok, let's try this, I give up, we do need a local binding * TCP hash as well as the others for fast bind/connect. @@ -107,7 +109,7 @@ struct inet_hashinfo { struct inet_bind_hashbucket *bhash; unsigned int bhash_size; - unsigned int ehash_size; + /* Note : 4 bytes padding on 64 bit arches */ /* All sockets in TCP_LISTEN state will be in here. This is the only * table where wildcard'd TCP sockets can exist. Hash function here @@ -134,6 +136,62 @@ static inline struct inet_ehash_bucket *inet_ehash_bucket( return &hashinfo->ehash[hash & (hashinfo->ehash_size - 1)]; } +static inline rwlock_t *inet_ehash_lockp( + struct inet_hashinfo *hashinfo, + unsigned int hash) +{ + return &hashinfo->ehash_locks[hash & hashinfo->ehash_locks_mask]; +} + +static inline int inet_ehash_locks_alloc(struct inet_hashinfo *hashinfo) +{ + unsigned int i, size = 256; +#if defined(CONFIG_PROVE_LOCKING) + unsigned int nr_pcpus = 2; +#else + unsigned int nr_pcpus = num_possible_cpus(); +#endif + if (nr_pcpus >= 4) + size = 512; + if (nr_pcpus >= 8) + size = 1024; + if (nr_pcpus >= 16) + size = 2048; + if (nr_pcpus >= 32) + size = 4096; + if (sizeof(rwlock_t) != 0) { +#ifdef CONFIG_NUMA + if (size * sizeof(rwlock_t) > PAGE_SIZE) + hashinfo->ehash_locks = vmalloc(size * sizeof(rwlock_t)); + else +#endif + hashinfo->ehash_locks = kmalloc(size * sizeof(rwlock_t), + GFP_KERNEL); + if (!hashinfo->ehash_locks) + return ENOMEM; + for (i = 0; i < size; i++) + rwlock_init(&hashinfo->ehash_locks[i]); + } + hashinfo->ehash_locks_mask = size - 1; + return 0; +} + +static inline void inet_ehash_locks_free(struct inet_hashinfo *hashinfo) +{ + if (hashinfo->ehash_locks) { +#ifdef CONFIG_NUMA + unsigned int size = (hashinfo->ehash_locks_mask + 1) * + sizeof(rwlock_t); + if (size > PAGE_SIZE) + vfree(hashinfo->ehash_locks); + else +#else + kfree(hashinfo->ehash_locks); +#endif + hashinfo->ehash_locks = NULL; + } +} + extern struct inet_bind_bucket * inet_bind_bucket_create(struct kmem_cache *cachep, struct inet_bind_hashbucket *head, @@ -222,7 +280,7 @@ static inline void __inet_hash(struct inet_hashinfo *hashinfo, sk->sk_hash = inet_sk_ehashfn(sk); head = inet_ehash_bucket(hashinfo, sk->sk_hash); list = &head->chain; - lock = &head->lock; + lock = inet_ehash_lockp(hashinfo, sk->sk_hash); write_lock(lock); } __sk_add_node(sk, list); @@ -253,7 +311,7 @@ static inline void inet_unhash(struct inet_hashinfo *hashinfo, struct sock *sk) inet_listen_wlock(hashinfo); lock = &hashinfo->lhash_lock; } else { - lock = &inet_ehash_bucket(hashinfo, sk->sk_hash)->lock; + lock = inet_ehash_lockp(hashinfo, sk->sk_hash); write_lock_bh(lock); } @@ -354,9 +412,10 @@ static inline struct sock * */ unsigned int hash = inet_ehashfn(daddr, hnum, saddr, sport); struct inet_ehash_bucket *head = inet_ehash_bucket(hashinfo, hash); + rwlock_t *lock = inet_ehash_lockp(hashinfo, hash); prefetch(head->chain.first); - read_lock(&head->lock); + read_lock(lock); sk_for_each(sk, node, &head->chain) { if (INET_MATCH(sk, hash, acookie, saddr, daddr, ports, dif)) goto hit; /* You sunk my battleship! */ @@ -369,7 +428,7 @@ static inline struct sock * } sk = NULL; out: - read_unlock(&head->lock); + read_unlock(lock); return sk; hit: sock_hold(sk); diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h index 8cadc77c7df4..ed514bfb61ba 100644 --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -185,6 +185,12 @@ static inline void fib_select_default(const struct flowi *flp, struct fib_result } #else /* CONFIG_IP_MULTIPLE_TABLES */ +extern void __init fib4_rules_init(void); + +#ifdef CONFIG_NET_CLS_ROUTE +extern u32 fib_rules_tclass(struct fib_result *res); +#endif + #define ip_fib_local_table fib_get_table(RT_TABLE_LOCAL) #define ip_fib_main_table fib_get_table(RT_TABLE_MAIN) @@ -214,15 +220,6 @@ extern __be32 __fib_res_prefsrc(struct fib_result *res); /* Exported by fib_hash.c */ extern struct fib_table *fib_hash_init(u32 id); -#ifdef CONFIG_IP_MULTIPLE_TABLES -extern void __init fib4_rules_init(void); - -#ifdef CONFIG_NET_CLS_ROUTE -extern u32 fib_rules_tclass(struct fib_result *res); -#endif - -#endif - static inline void fib_combine_itag(u32 *itag, struct fib_result *res) { #ifdef CONFIG_NET_CLS_ROUTE diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 41870564df8e..67ea2c0c0ab7 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -520,6 +520,10 @@ struct ip_vs_conn { spinlock_t lock; /* lock for state transition */ volatile __u16 flags; /* status flags */ volatile __u16 state; /* state info */ + volatile __u16 old_state; /* old state, to be used for + * state transition triggerd + * synchronization + */ /* Control members */ struct ip_vs_conn *control; /* Master control connection */ @@ -901,6 +905,10 @@ extern int ip_vs_use_count_inc(void); extern void ip_vs_use_count_dec(void); extern int ip_vs_control_init(void); extern void ip_vs_control_cleanup(void); +extern struct ip_vs_dest * +ip_vs_find_dest(__be32 daddr, __be16 dport, + __be32 vaddr, __be16 vport, __u16 protocol); +extern struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp); /* diff --git a/include/net/sock.h b/include/net/sock.h index 20de3fa7ae40..5504fb9fa88a 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -560,6 +560,14 @@ struct proto { void (*unhash)(struct sock *sk); int (*get_port)(struct sock *sk, unsigned short snum); +#ifdef CONFIG_SMP + /* Keeping track of sockets in use */ + void (*inuse_add)(struct proto *prot, int inc); + int (*inuse_getval)(const struct proto *prot); + int *inuse_ptr; +#else + int inuse; +#endif /* Memory pressure */ void (*enter_memory_pressure)(void); atomic_t *memory_allocated; /* Current allocated memory. */ @@ -592,12 +600,38 @@ struct proto { #ifdef SOCK_REFCNT_DEBUG atomic_t socks; #endif - struct { - int inuse; - u8 __pad[SMP_CACHE_BYTES - sizeof(int)]; - } stats[NR_CPUS]; }; +/* + * Special macros to let protos use a fast version of inuse{get|add} + * using a static percpu variable per proto instead of an allocated one, + * saving one dereference. + * This might be changed if/when dynamic percpu vars become fast. + */ +#ifdef CONFIG_SMP +# define DEFINE_PROTO_INUSE(NAME) \ +static DEFINE_PER_CPU(int, NAME##_inuse); \ +static void NAME##_inuse_add(struct proto *prot, int inc) \ +{ \ + __get_cpu_var(NAME##_inuse) += inc; \ +} \ + \ +static int NAME##_inuse_getval(const struct proto *prot)\ +{ \ + int res = 0, cpu; \ + \ + for_each_possible_cpu(cpu) \ + res += per_cpu(NAME##_inuse, cpu); \ + return res; \ +} +# define REF_PROTO_INUSE(NAME) \ + .inuse_add = NAME##_inuse_add, \ + .inuse_getval = NAME##_inuse_getval, +#else +# define DEFINE_PROTO_INUSE(NAME) +# define REF_PROTO_INUSE(NAME) +#endif + extern int proto_register(struct proto *prot, int alloc_slab); extern void proto_unregister(struct proto *prot); @@ -629,12 +663,29 @@ static inline void sk_refcnt_debug_release(const struct sock *sk) /* Called with local bh disabled */ static __inline__ void sock_prot_inc_use(struct proto *prot) { - prot->stats[smp_processor_id()].inuse++; +#ifdef CONFIG_SMP + prot->inuse_add(prot, 1); +#else + prot->inuse++; +#endif } static __inline__ void sock_prot_dec_use(struct proto *prot) { - prot->stats[smp_processor_id()].inuse--; +#ifdef CONFIG_SMP + prot->inuse_add(prot, -1); +#else + prot->inuse--; +#endif +} + +static __inline__ int sock_prot_inuse(struct proto *proto) +{ +#ifdef CONFIG_SMP + return proto->inuse_getval(proto); +#else + return proto->inuse; +#endif } /* With per-bucket locks this operation is not-atomic, so that diff --git a/init/main.c b/init/main.c index f605a969ea61..80b04b6c5157 100644 --- a/init/main.c +++ b/init/main.c @@ -56,6 +56,7 @@ #include <linux/pid_namespace.h> #include <linux/device.h> #include <linux/kthread.h> +#include <linux/sched.h> #include <asm/io.h> #include <asm/bugs.h> @@ -747,11 +748,8 @@ __setup("nosoftlockup", nosoftlockup_setup); static void __init do_pre_smp_initcalls(void) { extern int spawn_ksoftirqd(void); -#ifdef CONFIG_SMP - extern int migration_init(void); migration_init(); -#endif spawn_ksoftirqd(); if (!nosoftlockup) spawn_softlockup_task(); diff --git a/ipc/mqueue.c b/ipc/mqueue.c index bfa274ba9ed4..1e04cd464af9 100644 --- a/ipc/mqueue.c +++ b/ipc/mqueue.c @@ -1010,6 +1010,8 @@ asmlinkage long sys_mq_notify(mqd_t mqdes, return -EINVAL; } if (notification.sigev_notify == SIGEV_THREAD) { + long timeo; + /* create the notify skb */ nc = alloc_skb(NOTIFY_COOKIE_LEN, GFP_KERNEL); ret = -ENOMEM; @@ -1038,8 +1040,8 @@ retry: goto out; } - ret = netlink_attachskb(sock, nc, 0, - MAX_SCHEDULE_TIMEOUT, NULL); + timeo = MAX_SCHEDULE_TIMEOUT; + ret = netlink_attachskb(sock, nc, 0, &timeo, NULL); if (ret == 1) goto retry; if (ret) { diff --git a/kernel/fork.c b/kernel/fork.c index 28a740151988..8ca1a14cdc8c 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1123,6 +1123,9 @@ static struct task_struct *copy_process(unsigned long clone_flags, p->blocked_on = NULL; /* not blocked yet */ #endif + /* Perform scheduler related setup. Assign this task to a CPU. */ + sched_fork(p, clone_flags); + if ((retval = security_task_alloc(p))) goto bad_fork_cleanup_policy; if ((retval = audit_alloc(p))) @@ -1212,9 +1215,6 @@ static struct task_struct *copy_process(unsigned long clone_flags, INIT_LIST_HEAD(&p->ptrace_children); INIT_LIST_HEAD(&p->ptrace_list); - /* Perform scheduler related setup. Assign this task to a CPU. */ - sched_fork(p, clone_flags); - /* Now that the task is set up, run cgroup callbacks if * necessary. We need to run them before the task is visible * on the tasklist. */ diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c index 00b572666cc7..0a43def6fee7 100644 --- a/kernel/futex_compat.c +++ b/kernel/futex_compat.c @@ -30,6 +30,15 @@ fetch_robust_entry(compat_uptr_t *uentry, struct robust_list __user **entry, return 0; } +static void __user *futex_uaddr(struct robust_list *entry, + compat_long_t futex_offset) +{ + compat_uptr_t base = ptr_to_compat(entry); + void __user *uaddr = compat_ptr(base + futex_offset); + + return uaddr; +} + /* * Walk curr->robust_list (very carefully, it's a userspace list!) * and mark any locks found there dead, and notify any waiters. @@ -76,11 +85,12 @@ void compat_exit_robust_list(struct task_struct *curr) * A pending lock might already be on the list, so * dont process it twice: */ - if (entry != pending) - if (handle_futex_death((void __user *)entry + futex_offset, - curr, pi)) - return; + if (entry != pending) { + void __user *uaddr = futex_uaddr(entry, futex_offset); + if (handle_futex_death(uaddr, curr, pi)) + return; + } if (rc) return; uentry = next_uentry; @@ -94,9 +104,11 @@ void compat_exit_robust_list(struct task_struct *curr) cond_resched(); } - if (pending) - handle_futex_death((void __user *)pending + futex_offset, - curr, pip); + if (pending) { + void __user *uaddr = futex_uaddr(pending, futex_offset); + + handle_futex_death(uaddr, curr, pip); + } } asmlinkage long diff --git a/kernel/sched.c b/kernel/sched.c index 3f6bd1112900..b18f231a4875 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -75,7 +75,7 @@ */ unsigned long long __attribute__((weak)) sched_clock(void) { - return (unsigned long long)jiffies * (1000000000 / HZ); + return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ); } /* @@ -99,8 +99,8 @@ unsigned long long __attribute__((weak)) sched_clock(void) /* * Some helpers for converting nanosecond timing to jiffy resolution */ -#define NS_TO_JIFFIES(TIME) ((unsigned long)(TIME) / (1000000000 / HZ)) -#define JIFFIES_TO_NS(TIME) ((TIME) * (1000000000 / HZ)) +#define NS_TO_JIFFIES(TIME) ((unsigned long)(TIME) / (NSEC_PER_SEC / HZ)) +#define JIFFIES_TO_NS(TIME) ((TIME) * (NSEC_PER_SEC / HZ)) #define NICE_0_LOAD SCHED_LOAD_SCALE #define NICE_0_SHIFT SCHED_LOAD_SHIFT @@ -460,7 +460,6 @@ enum { SCHED_FEAT_TREE_AVG = 4, SCHED_FEAT_APPROX_AVG = 8, SCHED_FEAT_WAKEUP_PREEMPT = 16, - SCHED_FEAT_PREEMPT_RESTRICT = 32, }; const_debug unsigned int sysctl_sched_features = @@ -468,12 +467,17 @@ const_debug unsigned int sysctl_sched_features = SCHED_FEAT_START_DEBIT * 1 | SCHED_FEAT_TREE_AVG * 0 | SCHED_FEAT_APPROX_AVG * 0 | - SCHED_FEAT_WAKEUP_PREEMPT * 1 | - SCHED_FEAT_PREEMPT_RESTRICT * 1; + SCHED_FEAT_WAKEUP_PREEMPT * 1; #define sched_feat(x) (sysctl_sched_features & SCHED_FEAT_##x) /* + * Number of tasks to iterate in a single balance run. + * Limited because this is done with IRQs disabled. + */ +const_debug unsigned int sysctl_sched_nr_migrate = 32; + +/* * For kernel-internal use: high-speed (but slightly incorrect) per-cpu * clock constructed from sched_clock(): */ @@ -2237,7 +2241,7 @@ balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest, enum cpu_idle_type idle, int *all_pinned, int *this_best_prio, struct rq_iterator *iterator) { - int pulled = 0, pinned = 0, skip_for_load; + int loops = 0, pulled = 0, pinned = 0, skip_for_load; struct task_struct *p; long rem_load_move = max_load_move; @@ -2251,10 +2255,10 @@ balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest, */ p = iterator->start(iterator->arg); next: - if (!p) + if (!p || loops++ > sysctl_sched_nr_migrate) goto out; /* - * To help distribute high priority tasks accross CPUs we don't + * To help distribute high priority tasks across CPUs we don't * skip a task if it will be the highest priority task (i.e. smallest * prio value) on its new queue regardless of its load weight */ @@ -2271,8 +2275,7 @@ next: rem_load_move -= p->se.load.weight; /* - * We only want to steal up to the prescribed number of tasks - * and the prescribed amount of weighted load. + * We only want to steal up to the prescribed amount of weighted load. */ if (rem_load_move > 0) { if (p->prio < *this_best_prio) @@ -4992,6 +4995,32 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu) */ cpumask_t nohz_cpu_mask = CPU_MASK_NONE; +/* + * Increase the granularity value when there are more CPUs, + * because with more CPUs the 'effective latency' as visible + * to users decreases. But the relationship is not linear, + * so pick a second-best guess by going with the log2 of the + * number of CPUs. + * + * This idea comes from the SD scheduler of Con Kolivas: + */ +static inline void sched_init_granularity(void) +{ + unsigned int factor = 1 + ilog2(num_online_cpus()); + const unsigned long limit = 200000000; + + sysctl_sched_min_granularity *= factor; + if (sysctl_sched_min_granularity > limit) + sysctl_sched_min_granularity = limit; + + sysctl_sched_latency *= factor; + if (sysctl_sched_latency > limit) + sysctl_sched_latency = limit; + + sysctl_sched_wakeup_granularity *= factor; + sysctl_sched_batch_wakeup_granularity *= factor; +} + #ifdef CONFIG_SMP /* * This is how migration works: @@ -5621,7 +5650,7 @@ static struct notifier_block __cpuinitdata migration_notifier = { .priority = 10 }; -int __init migration_init(void) +void __init migration_init(void) { void *cpu = (void *)(long)smp_processor_id(); int err; @@ -5631,8 +5660,6 @@ int __init migration_init(void) BUG_ON(err == NOTIFY_BAD); migration_call(&migration_notifier, CPU_ONLINE, cpu); register_cpu_notifier(&migration_notifier); - - return 0; } #endif @@ -6688,10 +6715,12 @@ void __init sched_init_smp(void) /* Move init over to a non-isolated CPU */ if (set_cpus_allowed(current, non_isolated_cpus) < 0) BUG(); + sched_init_granularity(); } #else void __init sched_init_smp(void) { + sched_init_granularity(); } #endif /* CONFIG_SMP */ @@ -7228,7 +7257,7 @@ static u64 cpu_usage_read(struct cgroup *cgrp, struct cftype *cft) spin_unlock_irqrestore(&cpu_rq(i)->lock, flags); } /* Convert from ns to ms */ - do_div(res, 1000000); + do_div(res, NSEC_PER_MSEC); return res; } diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index 415e5c385542..ca198a797bfa 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -211,7 +211,7 @@ static int sched_debug_show(struct seq_file *m, void *v) #define PN(x) \ SEQ_printf(m, " .%-40s: %Ld.%06ld\n", #x, SPLIT_NS(x)) PN(sysctl_sched_latency); - PN(sysctl_sched_nr_latency); + PN(sysctl_sched_min_granularity); PN(sysctl_sched_wakeup_granularity); PN(sysctl_sched_batch_wakeup_granularity); PN(sysctl_sched_child_runs_first); diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 01859f662ab7..d3c03070872d 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -22,7 +22,7 @@ /* * Targeted preemption latency for CPU-bound tasks: - * (default: 20ms, units: nanoseconds) + * (default: 20ms * ilog(ncpus), units: nanoseconds) * * NOTE: this latency value is not the same as the concept of * 'timeslice length' - timeslices in CFS are of variable length @@ -32,19 +32,24 @@ * (to see the precise effective timeslice length of your workload, * run vmstat and monitor the context-switches (cs) field) */ -const_debug unsigned int sysctl_sched_latency = 20000000ULL; +unsigned int sysctl_sched_latency = 20000000ULL; /* - * After fork, child runs first. (default) If set to 0 then - * parent will (try to) run first. + * Minimal preemption granularity for CPU-bound tasks: + * (default: 1 msec * ilog(ncpus), units: nanoseconds) */ -const_debug unsigned int sysctl_sched_child_runs_first = 1; +unsigned int sysctl_sched_min_granularity = 1000000ULL; /* - * Minimal preemption granularity for CPU-bound tasks: - * (default: 2 msec, units: nanoseconds) + * is kept at sysctl_sched_latency / sysctl_sched_min_granularity + */ +unsigned int sched_nr_latency = 20; + +/* + * After fork, child runs first. (default) If set to 0 then + * parent will (try to) run first. */ -const_debug unsigned int sysctl_sched_nr_latency = 20; +const_debug unsigned int sysctl_sched_child_runs_first = 1; /* * sys_sched_yield() compat mode @@ -56,23 +61,23 @@ unsigned int __read_mostly sysctl_sched_compat_yield; /* * SCHED_BATCH wake-up granularity. - * (default: 10 msec, units: nanoseconds) + * (default: 10 msec * ilog(ncpus), units: nanoseconds) * * This option delays the preemption effects of decoupled workloads * and reduces their over-scheduling. Synchronous workloads will still * have immediate wakeup/sleep latencies. */ -const_debug unsigned int sysctl_sched_batch_wakeup_granularity = 10000000UL; +unsigned int sysctl_sched_batch_wakeup_granularity = 10000000UL; /* * SCHED_OTHER wake-up granularity. - * (default: 10 msec, units: nanoseconds) + * (default: 10 msec * ilog(ncpus), units: nanoseconds) * * This option delays the preemption effects of decoupled workloads * and reduces their over-scheduling. Synchronous workloads will still * have immediate wakeup/sleep latencies. */ -const_debug unsigned int sysctl_sched_wakeup_granularity = 10000000UL; +unsigned int sysctl_sched_wakeup_granularity = 10000000UL; const_debug unsigned int sysctl_sched_migration_cost = 500000UL; @@ -212,6 +217,22 @@ static inline struct sched_entity *__pick_last_entity(struct cfs_rq *cfs_rq) * Scheduling class statistics methods: */ +#ifdef CONFIG_SCHED_DEBUG +int sched_nr_latency_handler(struct ctl_table *table, int write, + struct file *filp, void __user *buffer, size_t *lenp, + loff_t *ppos) +{ + int ret = proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos); + + if (ret || !write) + return ret; + + sched_nr_latency = DIV_ROUND_UP(sysctl_sched_latency, + sysctl_sched_min_granularity); + + return 0; +} +#endif /* * The idea is to set a period in which each task runs once. @@ -224,7 +245,7 @@ static inline struct sched_entity *__pick_last_entity(struct cfs_rq *cfs_rq) static u64 __sched_period(unsigned long nr_running) { u64 period = sysctl_sched_latency; - unsigned long nr_latency = sysctl_sched_nr_latency; + unsigned long nr_latency = sched_nr_latency; if (unlikely(nr_running > nr_latency)) { period *= nr_running; @@ -259,6 +280,7 @@ static u64 __sched_vslice(unsigned long rq_weight, unsigned long nr_running) { u64 vslice = __sched_period(nr_running); + vslice *= NICE_0_LOAD; do_div(vslice, rq_weight); return vslice; @@ -472,19 +494,26 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial) } else if (sched_feat(APPROX_AVG) && cfs_rq->nr_running) vruntime += sched_vslice(cfs_rq)/2; + /* + * The 'current' period is already promised to the current tasks, + * however the extra weight of the new task will slow them down a + * little, place the new task so that it fits in the slot that + * stays open at the end. + */ if (initial && sched_feat(START_DEBIT)) vruntime += sched_vslice_add(cfs_rq, se); if (!initial) { + /* sleeps upto a single latency don't count. */ if (sched_feat(NEW_FAIR_SLEEPERS) && entity_is_task(se) && task_of(se)->policy != SCHED_BATCH) vruntime -= sysctl_sched_latency; - vruntime = max_t(s64, vruntime, se->vruntime); + /* ensure we never gain time by being placed backwards. */ + vruntime = max_vruntime(se->vruntime, vruntime); } se->vruntime = vruntime; - } static void @@ -517,7 +546,6 @@ dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep) update_stats_dequeue(cfs_rq, se); if (sleep) { - se->peer_preempt = 0; #ifdef CONFIG_SCHEDSTATS if (entity_is_task(se)) { struct task_struct *tsk = task_of(se); @@ -545,10 +573,8 @@ check_preempt_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr) ideal_runtime = sched_slice(cfs_rq, curr); delta_exec = curr->sum_exec_runtime - curr->prev_sum_exec_runtime; - if (delta_exec > ideal_runtime || - (sched_feat(PREEMPT_RESTRICT) && curr->peer_preempt)) + if (delta_exec > ideal_runtime) resched_task(rq_of(cfs_rq)->curr); - curr->peer_preempt = 0; } static void @@ -811,7 +837,7 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p) struct task_struct *curr = rq->curr; struct cfs_rq *cfs_rq = task_cfs_rq(curr); struct sched_entity *se = &curr->se, *pse = &p->se; - s64 delta, gran; + unsigned long gran; if (unlikely(rt_prio(p->prio))) { update_rq_clock(rq); @@ -826,24 +852,20 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p) if (unlikely(p->policy == SCHED_BATCH)) return; - if (sched_feat(WAKEUP_PREEMPT)) { - while (!is_same_group(se, pse)) { - se = parent_entity(se); - pse = parent_entity(pse); - } + if (!sched_feat(WAKEUP_PREEMPT)) + return; - delta = se->vruntime - pse->vruntime; - gran = sysctl_sched_wakeup_granularity; - if (unlikely(se->load.weight != NICE_0_LOAD)) - gran = calc_delta_fair(gran, &se->load); + while (!is_same_group(se, pse)) { + se = parent_entity(se); + pse = parent_entity(pse); + } - if (delta > gran) { - int now = !sched_feat(PREEMPT_RESTRICT); + gran = sysctl_sched_wakeup_granularity; + if (unlikely(se->load.weight != NICE_0_LOAD)) + gran = calc_delta_fair(gran, &se->load); - if (now || p->prio < curr->prio || !se->peer_preempt++) - resched_task(curr); - } - } + if (pse->vruntime + gran < se->vruntime) + resched_task(curr); } static struct task_struct *pick_next_task_fair(struct rq *rq) @@ -1045,8 +1067,9 @@ static void task_new_fair(struct rq *rq, struct task_struct *p) update_curr(cfs_rq); place_entity(cfs_rq, se, 1); + /* 'curr' will be NULL if the child belongs to a different group */ if (sysctl_sched_child_runs_first && this_cpu == task_cpu(p) && - curr->vruntime < se->vruntime) { + curr && curr->vruntime < se->vruntime) { /* * Upon rescheduling, sched_class::put_prev_task() will place * 'current' within the tree based on its new key value. @@ -1054,7 +1077,6 @@ static void task_new_fair(struct rq *rq, struct task_struct *p) swap(curr->vruntime, se->vruntime); } - se->peer_preempt = 0; enqueue_task_fair(rq, p, 0); resched_task(rq->curr); } diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index ef1a7df80ea2..630178e53bb6 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -127,7 +127,7 @@ rq_sched_info_depart(struct rq *rq, unsigned long long delta) # define schedstat_set(var, val) do { } while (0) #endif -#ifdef CONFIG_SCHEDSTATS +#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) /* * Called when a process is dequeued from the active array and given * the cpu. We should note that with the exception of interactive @@ -155,7 +155,7 @@ static inline void sched_info_dequeued(struct task_struct *t) */ static void sched_info_arrive(struct task_struct *t) { - unsigned long long now = sched_clock(), delta = 0; + unsigned long long now = task_rq(t)->clock, delta = 0; if (t->sched_info.last_queued) delta = now - t->sched_info.last_queued; @@ -186,7 +186,7 @@ static inline void sched_info_queued(struct task_struct *t) { if (unlikely(sched_info_on())) if (!t->sched_info.last_queued) - t->sched_info.last_queued = sched_clock(); + t->sched_info.last_queued = task_rq(t)->clock; } /* @@ -195,7 +195,8 @@ static inline void sched_info_queued(struct task_struct *t) */ static inline void sched_info_depart(struct task_struct *t) { - unsigned long long delta = sched_clock() - t->sched_info.last_arrival; + unsigned long long delta = task_rq(t)->clock - + t->sched_info.last_arrival; t->sched_info.cpu_time += delta; rq_sched_info_depart(task_rq(t), delta); @@ -231,5 +232,5 @@ sched_info_switch(struct task_struct *prev, struct task_struct *next) #else #define sched_info_queued(t) do { } while (0) #define sched_info_switch(t, next) do { } while (0) -#endif /* CONFIG_SCHEDSTATS */ +#endif /* CONFIG_SCHEDSTATS || CONFIG_TASK_DELAY_ACCT */ diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 3b4efbe26445..3a1744fed2b6 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -226,20 +226,23 @@ static struct ctl_table root_table[] = { #ifdef CONFIG_SCHED_DEBUG static unsigned long min_sched_granularity_ns = 100000; /* 100 usecs */ -static unsigned long max_sched_granularity_ns = 1000000000; /* 1 second */ +static unsigned long max_sched_granularity_ns = NSEC_PER_SEC; /* 1 second */ static unsigned long min_wakeup_granularity_ns; /* 0 usecs */ -static unsigned long max_wakeup_granularity_ns = 1000000000; /* 1 second */ +static unsigned long max_wakeup_granularity_ns = NSEC_PER_SEC; /* 1 second */ #endif static struct ctl_table kern_table[] = { #ifdef CONFIG_SCHED_DEBUG { .ctl_name = CTL_UNNUMBERED, - .procname = "sched_nr_latency", - .data = &sysctl_sched_nr_latency, + .procname = "sched_min_granularity_ns", + .data = &sysctl_sched_min_granularity, .maxlen = sizeof(unsigned int), .mode = 0644, - .proc_handler = &proc_dointvec, + .proc_handler = &sched_nr_latency_handler, + .strategy = &sysctl_intvec, + .extra1 = &min_sched_granularity_ns, + .extra2 = &max_sched_granularity_ns, }, { .ctl_name = CTL_UNNUMBERED, @@ -247,7 +250,7 @@ static struct ctl_table kern_table[] = { .data = &sysctl_sched_latency, .maxlen = sizeof(unsigned int), .mode = 0644, - .proc_handler = &proc_dointvec_minmax, + .proc_handler = &sched_nr_latency_handler, .strategy = &sysctl_intvec, .extra1 = &min_sched_granularity_ns, .extra2 = &max_sched_granularity_ns, @@ -298,6 +301,14 @@ static struct ctl_table kern_table[] = { .mode = 0644, .proc_handler = &proc_dointvec, }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "sched_nr_migrate", + .data = &sysctl_sched_nr_migrate, + .maxlen = sizeof(unsigned int), + .mode = 644, + .proc_handler = &proc_dointvec, + }, #endif { .ctl_name = CTL_UNNUMBERED, diff --git a/kernel/timer.c b/kernel/timer.c index 00e44e2afd67..a05817c021d6 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -817,6 +817,19 @@ unsigned long next_timer_interrupt(void) #endif +#ifndef CONFIG_VIRT_CPU_ACCOUNTING +void account_process_tick(struct task_struct *p, int user_tick) +{ + if (user_tick) { + account_user_time(p, jiffies_to_cputime(1)); + account_user_time_scaled(p, jiffies_to_cputime(1)); + } else { + account_system_time(p, HARDIRQ_OFFSET, jiffies_to_cputime(1)); + account_system_time_scaled(p, jiffies_to_cputime(1)); + } +} +#endif + /* * Called from the timer interrupt handler to charge one tick to the current * process. user_tick is 1 if the tick is user time, 0 for system. @@ -827,13 +840,7 @@ void update_process_times(int user_tick) int cpu = smp_processor_id(); /* Note: this timer irq context must be accounted for as well. */ - if (user_tick) { - account_user_time(p, jiffies_to_cputime(1)); - account_user_time_scaled(p, jiffies_to_cputime(1)); - } else { - account_system_time(p, HARDIRQ_OFFSET, jiffies_to_cputime(1)); - account_system_time_scaled(p, jiffies_to_cputime(1)); - } + account_process_tick(p, user_tick); run_local_timers(); if (rcu_pending(cpu)) rcu_check_callbacks(cpu, user_tick); diff --git a/lib/libcrc32c.c b/lib/libcrc32c.c index 802f11f0bf5b..b5c3287d8ea4 100644 --- a/lib/libcrc32c.c +++ b/lib/libcrc32c.c @@ -33,7 +33,6 @@ #include <linux/crc32c.h> #include <linux/compiler.h> #include <linux/module.h> -#include <asm/byteorder.h> MODULE_AUTHOR("Clay Haapala <chaapala@cisco.com>"); MODULE_DESCRIPTION("CRC32c (Castagnoli) calculations"); @@ -161,15 +160,13 @@ static const u32 crc32c_table[256] = { */ u32 __pure -crc32c_le(u32 seed, unsigned char const *data, size_t length) +crc32c_le(u32 crc, unsigned char const *data, size_t length) { - u32 crc = __cpu_to_le32(seed); - while (length--) crc = crc32c_table[(crc ^ *data++) & 0xFFL] ^ (crc >> 8); - return __le32_to_cpu(crc); + return crc; } #endif /* CRC_LE_BITS == 8 */ diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 3fe4fc86055f..1037748c14db 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -747,6 +747,7 @@ static int vlan_ioctl_handler(struct net *net, void __user *arg) vlan_dev_set_ingress_priority(dev, args.u.skb_priority, args.vlan_qos); + err = 0; break; case SET_VLAN_EGRESS_PRIORITY_CMD: diff --git a/net/bridge/netfilter/ebt_arp.c b/net/bridge/netfilter/ebt_arp.c index 1a46952a56d9..18141392a9b4 100644 --- a/net/bridge/netfilter/ebt_arp.c +++ b/net/bridge/netfilter/ebt_arp.c @@ -34,7 +34,7 @@ static int ebt_filter_arp(const struct sk_buff *skb, const struct net_device *in ah->ar_pro, EBT_ARP_PTYPE)) return EBT_NOMATCH; - if (info->bitmask & (EBT_ARP_SRC_IP | EBT_ARP_DST_IP)) { + if (info->bitmask & (EBT_ARP_SRC_IP | EBT_ARP_DST_IP | EBT_ARP_GRAT)) { __be32 saddr, daddr, *sap, *dap; if (ah->ar_pln != sizeof(__be32) || ah->ar_pro != htons(ETH_P_IP)) diff --git a/net/core/dst.c b/net/core/dst.c index 16958e64e577..03daead3592a 100644 --- a/net/core/dst.c +++ b/net/core/dst.c @@ -18,7 +18,6 @@ #include <linux/types.h> #include <net/net_namespace.h> -#include <net/net_namespace.h> #include <net/dst.h> /* diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 05979e356963..29b8ee4e35d6 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1435,6 +1435,8 @@ int neigh_table_clear(struct neigh_table *tbl) kfree(tbl->phash_buckets); tbl->phash_buckets = NULL; + remove_proc_entry(tbl->id, init_net.proc_net_stat); + free_percpu(tbl->stats); tbl->stats = NULL; diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index e9f0964ce70b..3f6d37deac45 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -64,6 +64,20 @@ static struct net *net_alloc(void) return kmem_cache_zalloc(net_cachep, GFP_KERNEL); } +static void net_free(struct net *net) +{ + if (!net) + return; + + if (unlikely(atomic_read(&net->use_count) != 0)) { + printk(KERN_EMERG "network namespace not free! Usage: %d\n", + atomic_read(&net->use_count)); + return; + } + + kmem_cache_free(net_cachep, net); +} + struct net *copy_net_ns(unsigned long flags, struct net *old_net) { struct net *new_net = NULL; @@ -100,20 +114,6 @@ out: return new_net; } -static void net_free(struct net *net) -{ - if (!net) - return; - - if (unlikely(atomic_read(&net->use_count) != 0)) { - printk(KERN_EMERG "network namespace not free! Usage: %d\n", - atomic_read(&net->use_count)); - return; - } - - kmem_cache_free(net_cachep, net); -} - static void cleanup_net(struct work_struct *work) { struct pernet_operations *ops; diff --git a/net/core/sock.c b/net/core/sock.c index 12ad2067a988..8fc2f84209e4 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1801,11 +1801,65 @@ EXPORT_SYMBOL(sk_common_release); static DEFINE_RWLOCK(proto_list_lock); static LIST_HEAD(proto_list); +#ifdef CONFIG_SMP +/* + * Define default functions to keep track of inuse sockets per protocol + * Note that often used protocols use dedicated functions to get a speed increase. + * (see DEFINE_PROTO_INUSE/REF_PROTO_INUSE) + */ +static void inuse_add(struct proto *prot, int inc) +{ + per_cpu_ptr(prot->inuse_ptr, smp_processor_id())[0] += inc; +} + +static int inuse_get(const struct proto *prot) +{ + int res = 0, cpu; + for_each_possible_cpu(cpu) + res += per_cpu_ptr(prot->inuse_ptr, cpu)[0]; + return res; +} + +static int inuse_init(struct proto *prot) +{ + if (!prot->inuse_getval || !prot->inuse_add) { + prot->inuse_ptr = alloc_percpu(int); + if (prot->inuse_ptr == NULL) + return -ENOBUFS; + + prot->inuse_getval = inuse_get; + prot->inuse_add = inuse_add; + } + return 0; +} + +static void inuse_fini(struct proto *prot) +{ + if (prot->inuse_ptr != NULL) { + free_percpu(prot->inuse_ptr); + prot->inuse_ptr = NULL; + prot->inuse_getval = NULL; + prot->inuse_add = NULL; + } +} +#else +static inline int inuse_init(struct proto *prot) +{ + return 0; +} + +static inline void inuse_fini(struct proto *prot) +{ +} +#endif + int proto_register(struct proto *prot, int alloc_slab) { char *request_sock_slab_name = NULL; char *timewait_sock_slab_name; - int rc = -ENOBUFS; + + if (inuse_init(prot)) + goto out; if (alloc_slab) { prot->slab = kmem_cache_create(prot->name, prot->obj_size, 0, @@ -1814,7 +1868,7 @@ int proto_register(struct proto *prot, int alloc_slab) if (prot->slab == NULL) { printk(KERN_CRIT "%s: Can't create sock SLAB cache!\n", prot->name); - goto out; + goto out_free_inuse; } if (prot->rsk_prot != NULL) { @@ -1858,9 +1912,8 @@ int proto_register(struct proto *prot, int alloc_slab) write_lock(&proto_list_lock); list_add(&prot->node, &proto_list); write_unlock(&proto_list_lock); - rc = 0; -out: - return rc; + return 0; + out_free_timewait_sock_slab_name: kfree(timewait_sock_slab_name); out_free_request_sock_slab: @@ -1873,7 +1926,10 @@ out_free_request_sock_slab_name: out_free_sock_slab: kmem_cache_destroy(prot->slab); prot->slab = NULL; - goto out; +out_free_inuse: + inuse_fini(prot); +out: + return -ENOBUFS; } EXPORT_SYMBOL(proto_register); @@ -1884,6 +1940,7 @@ void proto_unregister(struct proto *prot) list_del(&prot->node); write_unlock(&proto_list_lock); + inuse_fini(prot); if (prot->slab != NULL) { kmem_cache_destroy(prot->slab); prot->slab = NULL; diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index 01a6a808bdb7..db17b83e8d3e 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -922,6 +922,8 @@ static struct timewait_sock_ops dccp_timewait_sock_ops = { .twsk_obj_size = sizeof(struct inet_timewait_sock), }; +DEFINE_PROTO_INUSE(dccp_v4) + static struct proto dccp_v4_prot = { .name = "DCCP", .owner = THIS_MODULE, @@ -950,6 +952,7 @@ static struct proto dccp_v4_prot = { .compat_setsockopt = compat_dccp_setsockopt, .compat_getsockopt = compat_dccp_getsockopt, #endif + REF_PROTO_INUSE(dccp_v4) }; static struct net_protocol dccp_v4_protocol = { diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 62428ff137dd..87c98fb86fa8 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -1107,6 +1107,8 @@ static struct timewait_sock_ops dccp6_timewait_sock_ops = { .twsk_obj_size = sizeof(struct dccp6_timewait_sock), }; +DEFINE_PROTO_INUSE(dccp_v6) + static struct proto dccp_v6_prot = { .name = "DCCPv6", .owner = THIS_MODULE, @@ -1135,6 +1137,7 @@ static struct proto dccp_v6_prot = { .compat_setsockopt = compat_dccp_setsockopt, .compat_getsockopt = compat_dccp_getsockopt, #endif + REF_PROTO_INUSE(dccp_v6) }; static struct inet6_protocol dccp_v6_protocol = { diff --git a/net/dccp/proto.c b/net/dccp/proto.c index d84973928033..7a3bea9c28c1 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -1072,11 +1072,13 @@ static int __init dccp_init(void) } for (i = 0; i < dccp_hashinfo.ehash_size; i++) { - rwlock_init(&dccp_hashinfo.ehash[i].lock); INIT_HLIST_HEAD(&dccp_hashinfo.ehash[i].chain); INIT_HLIST_HEAD(&dccp_hashinfo.ehash[i].twchain); } + if (inet_ehash_locks_alloc(&dccp_hashinfo)) + goto out_free_dccp_ehash; + bhash_order = ehash_order; do { @@ -1091,7 +1093,7 @@ static int __init dccp_init(void) if (!dccp_hashinfo.bhash) { DCCP_CRIT("Failed to allocate DCCP bind hash table"); - goto out_free_dccp_ehash; + goto out_free_dccp_locks; } for (i = 0; i < dccp_hashinfo.bhash_size; i++) { @@ -1121,6 +1123,8 @@ out_free_dccp_mib: out_free_dccp_bhash: free_pages((unsigned long)dccp_hashinfo.bhash, bhash_order); dccp_hashinfo.bhash = NULL; +out_free_dccp_locks: + inet_ehash_locks_free(&dccp_hashinfo); out_free_dccp_ehash: free_pages((unsigned long)dccp_hashinfo.ehash, ehash_order); dccp_hashinfo.ehash = NULL; @@ -1139,6 +1143,7 @@ static void __exit dccp_fini(void) free_pages((unsigned long)dccp_hashinfo.ehash, get_order(dccp_hashinfo.ehash_size * sizeof(struct inet_ehash_bucket))); + inet_ehash_locks_free(&dccp_hashinfo); kmem_cache_destroy(dccp_hashinfo.bind_bucket_cachep); dccp_ackvec_exit(); dccp_sysctl_exit(); diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c index 26130afd8029..66e266fb5908 100644 --- a/net/decnet/dn_dev.c +++ b/net/decnet/dn_dev.c @@ -1439,7 +1439,7 @@ static const struct file_operations dn_dev_seq_fops = { #endif /* CONFIG_PROC_FS */ -static int __initdata addr[2]; +static int addr[2]; module_param_array(addr, int, NULL, 0444); MODULE_PARM_DESC(addr, "The DECnet address of this machine: area,node"); diff --git a/net/ieee80211/ieee80211_crypt_tkip.c b/net/ieee80211/ieee80211_crypt_tkip.c index 4cce3534e408..58b22619ab15 100644 --- a/net/ieee80211/ieee80211_crypt_tkip.c +++ b/net/ieee80211/ieee80211_crypt_tkip.c @@ -25,7 +25,6 @@ #include <net/ieee80211.h> #include <linux/crypto.h> -#include <linux/scatterlist.h> #include <linux/crc32.h> MODULE_AUTHOR("Jouni Malinen"); diff --git a/net/ieee80211/ieee80211_crypt_wep.c b/net/ieee80211/ieee80211_crypt_wep.c index 866fc04c44f9..3fa30c40779f 100644 --- a/net/ieee80211/ieee80211_crypt_wep.c +++ b/net/ieee80211/ieee80211_crypt_wep.c @@ -22,7 +22,6 @@ #include <net/ieee80211.h> #include <linux/crypto.h> -#include <linux/scatterlist.h> #include <linux/crc32.h> MODULE_AUTHOR("Jouni Malinen"); diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 60123905dbbf..732d8f088b13 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -59,6 +59,13 @@ struct fib_table *ip_fib_main_table; #define FIB_TABLE_HASHSZ 1 static struct hlist_head fib_table_hash[FIB_TABLE_HASHSZ]; +static void __init fib4_rules_init(void) +{ + ip_fib_local_table = fib_hash_init(RT_TABLE_LOCAL); + hlist_add_head_rcu(&ip_fib_local_table->tb_hlist, &fib_table_hash[0]); + ip_fib_main_table = fib_hash_init(RT_TABLE_MAIN); + hlist_add_head_rcu(&ip_fib_main_table->tb_hlist, &fib_table_hash[0]); +} #else #define FIB_TABLE_HASHSZ 256 @@ -905,14 +912,8 @@ void __init ip_fib_init(void) for (i = 0; i < FIB_TABLE_HASHSZ; i++) INIT_HLIST_HEAD(&fib_table_hash[i]); -#ifndef CONFIG_IP_MULTIPLE_TABLES - ip_fib_local_table = fib_hash_init(RT_TABLE_LOCAL); - hlist_add_head_rcu(&ip_fib_local_table->tb_hlist, &fib_table_hash[0]); - ip_fib_main_table = fib_hash_init(RT_TABLE_MAIN); - hlist_add_head_rcu(&ip_fib_main_table->tb_hlist, &fib_table_hash[0]); -#else + fib4_rules_init(); -#endif register_netdevice_notifier(&fib_netdev_notifier); register_inetaddr_notifier(&fib_inetaddr_notifier); diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index dc429b6b0ba6..b0170732b5e9 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -747,13 +747,14 @@ skip_listen_ht: for (i = s_i; i < hashinfo->ehash_size; i++) { struct inet_ehash_bucket *head = &hashinfo->ehash[i]; + rwlock_t *lock = inet_ehash_lockp(hashinfo, i); struct sock *sk; struct hlist_node *node; if (i > s_i) s_num = 0; - read_lock_bh(&head->lock); + read_lock_bh(lock); num = 0; sk_for_each(sk, node, &head->chain) { struct inet_sock *inet = inet_sk(sk); @@ -769,7 +770,7 @@ skip_listen_ht: r->id.idiag_dport) goto next_normal; if (inet_csk_diag_dump(sk, skb, cb) < 0) { - read_unlock_bh(&head->lock); + read_unlock_bh(lock); goto done; } next_normal: @@ -791,14 +792,14 @@ next_normal: r->id.idiag_dport) goto next_dying; if (inet_twsk_diag_dump(tw, skb, cb) < 0) { - read_unlock_bh(&head->lock); + read_unlock_bh(lock); goto done; } next_dying: ++num; } } - read_unlock_bh(&head->lock); + read_unlock_bh(lock); } done: diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index 16eecc7046a3..67704da04fc4 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -204,12 +204,13 @@ static int __inet_check_established(struct inet_timewait_death_row *death_row, const __portpair ports = INET_COMBINED_PORTS(inet->dport, lport); unsigned int hash = inet_ehashfn(daddr, lport, saddr, inet->dport); struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash); + rwlock_t *lock = inet_ehash_lockp(hinfo, hash); struct sock *sk2; const struct hlist_node *node; struct inet_timewait_sock *tw; prefetch(head->chain.first); - write_lock(&head->lock); + write_lock(lock); /* Check TIME-WAIT sockets first. */ sk_for_each(sk2, node, &head->twchain) { @@ -239,7 +240,7 @@ unique: BUG_TRAP(sk_unhashed(sk)); __sk_add_node(sk, &head->chain); sock_prot_inc_use(sk->sk_prot); - write_unlock(&head->lock); + write_unlock(lock); if (twp) { *twp = tw; @@ -255,7 +256,7 @@ unique: return 0; not_unique: - write_unlock(&head->lock); + write_unlock(lock); return -EADDRNOTAVAIL; } diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c index 4e189e28f306..a60b99e0ebdc 100644 --- a/net/ipv4/inet_timewait_sock.c +++ b/net/ipv4/inet_timewait_sock.c @@ -20,16 +20,16 @@ static void __inet_twsk_kill(struct inet_timewait_sock *tw, struct inet_bind_hashbucket *bhead; struct inet_bind_bucket *tb; /* Unlink from established hashes. */ - struct inet_ehash_bucket *ehead = inet_ehash_bucket(hashinfo, tw->tw_hash); + rwlock_t *lock = inet_ehash_lockp(hashinfo, tw->tw_hash); - write_lock(&ehead->lock); + write_lock(lock); if (hlist_unhashed(&tw->tw_node)) { - write_unlock(&ehead->lock); + write_unlock(lock); return; } __hlist_del(&tw->tw_node); sk_node_init(&tw->tw_node); - write_unlock(&ehead->lock); + write_unlock(lock); /* Disassociate with bind bucket. */ bhead = &hashinfo->bhash[inet_bhashfn(tw->tw_num, hashinfo->bhash_size)]; @@ -59,6 +59,7 @@ void __inet_twsk_hashdance(struct inet_timewait_sock *tw, struct sock *sk, const struct inet_sock *inet = inet_sk(sk); const struct inet_connection_sock *icsk = inet_csk(sk); struct inet_ehash_bucket *ehead = inet_ehash_bucket(hashinfo, sk->sk_hash); + rwlock_t *lock = inet_ehash_lockp(hashinfo, sk->sk_hash); struct inet_bind_hashbucket *bhead; /* Step 1: Put TW into bind hash. Original socket stays there too. Note, that any socket with inet->num != 0 MUST be bound in @@ -71,7 +72,7 @@ void __inet_twsk_hashdance(struct inet_timewait_sock *tw, struct sock *sk, inet_twsk_add_bind_node(tw, &tw->tw_tb->owners); spin_unlock(&bhead->lock); - write_lock(&ehead->lock); + write_lock(lock); /* Step 2: Remove SK from established hash. */ if (__sk_del_node_init(sk)) @@ -81,7 +82,7 @@ void __inet_twsk_hashdance(struct inet_timewait_sock *tw, struct sock *sk, inet_twsk_add_node(tw, &ehead->twchain); atomic_inc(&tw->tw_refcnt); - write_unlock(&ehead->lock); + write_unlock(lock); } EXPORT_SYMBOL_GPL(__inet_twsk_hashdance); diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index e5f7dc2de303..fd99fbd685ea 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1183,6 +1183,17 @@ error: return err; } +static void ip_cork_release(struct inet_sock *inet) +{ + inet->cork.flags &= ~IPCORK_OPT; + kfree(inet->cork.opt); + inet->cork.opt = NULL; + if (inet->cork.rt) { + ip_rt_put(inet->cork.rt); + inet->cork.rt = NULL; + } +} + /* * Combined all pending IP fragments on the socket as one IP datagram * and push them out. @@ -1276,13 +1287,7 @@ int ip_push_pending_frames(struct sock *sk) } out: - inet->cork.flags &= ~IPCORK_OPT; - kfree(inet->cork.opt); - inet->cork.opt = NULL; - if (inet->cork.rt) { - ip_rt_put(inet->cork.rt); - inet->cork.rt = NULL; - } + ip_cork_release(inet); return err; error: @@ -1295,19 +1300,12 @@ error: */ void ip_flush_pending_frames(struct sock *sk) { - struct inet_sock *inet = inet_sk(sk); struct sk_buff *skb; while ((skb = __skb_dequeue_tail(&sk->sk_write_queue)) != NULL) kfree_skb(skb); - inet->cork.flags &= ~IPCORK_OPT; - kfree(inet->cork.opt); - inet->cork.opt = NULL; - if (inet->cork.rt) { - ip_rt_put(inet->cork.rt); - inet->cork.rt = NULL; - } + ip_cork_release(inet_sk(sk)); } diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c index f51f20e487c8..82817e554363 100644 --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -437,10 +437,8 @@ static int do_ip_setsockopt(struct sock *sk, int level, /* If optlen==0, it is equivalent to val == 0 */ -#ifdef CONFIG_IP_MROUTE - if (optname >= MRT_BASE && optname <= (MRT_BASE + 10)) + if (ip_mroute_opt(optname)) return ip_mroute_setsockopt(sk,optname,optval,optlen); -#endif err = 0; lock_sock(sk); @@ -909,11 +907,9 @@ int ip_setsockopt(struct sock *sk, int level, #ifdef CONFIG_NETFILTER /* we need to exclude all possible ENOPROTOOPTs except default case */ if (err == -ENOPROTOOPT && optname != IP_HDRINCL && - optname != IP_IPSEC_POLICY && optname != IP_XFRM_POLICY -#ifdef CONFIG_IP_MROUTE - && (optname < MRT_BASE || optname > (MRT_BASE + 10)) -#endif - ) { + optname != IP_IPSEC_POLICY && + optname != IP_XFRM_POLICY && + !ip_mroute_opt(optname)) { lock_sock(sk); err = nf_setsockopt(sk, PF_INET, optname, optval, optlen); release_sock(sk); @@ -935,11 +931,9 @@ int compat_ip_setsockopt(struct sock *sk, int level, int optname, #ifdef CONFIG_NETFILTER /* we need to exclude all possible ENOPROTOOPTs except default case */ if (err == -ENOPROTOOPT && optname != IP_HDRINCL && - optname != IP_IPSEC_POLICY && optname != IP_XFRM_POLICY -#ifdef CONFIG_IP_MROUTE - && (optname < MRT_BASE || optname > (MRT_BASE + 10)) -#endif - ) { + optname != IP_IPSEC_POLICY && + optname != IP_XFRM_POLICY && + !ip_mroute_opt(optname)) { lock_sock(sk); err = compat_nf_setsockopt(sk, PF_INET, optname, optval, optlen); @@ -967,11 +961,8 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname, if (level != SOL_IP) return -EOPNOTSUPP; -#ifdef CONFIG_IP_MROUTE - if (optname >= MRT_BASE && optname <= MRT_BASE+10) { + if (ip_mroute_opt(optname)) return ip_mroute_getsockopt(sk,optname,optval,optlen); - } -#endif if (get_user(len,optlen)) return -EFAULT; @@ -1171,11 +1162,8 @@ int ip_getsockopt(struct sock *sk, int level, err = do_ip_getsockopt(sk, level, optname, optval, optlen); #ifdef CONFIG_NETFILTER /* we need to exclude all possible ENOPROTOOPTs except default case */ - if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS -#ifdef CONFIG_IP_MROUTE - && (optname < MRT_BASE || optname > MRT_BASE+10) -#endif - ) { + if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS && + !ip_mroute_opt(optname)) { int len; if (get_user(len,optlen)) @@ -1200,11 +1188,8 @@ int compat_ip_getsockopt(struct sock *sk, int level, int optname, int err = do_ip_getsockopt(sk, level, optname, optval, optlen); #ifdef CONFIG_NETFILTER /* we need to exclude all possible ENOPROTOOPTs except default case */ - if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS -#ifdef CONFIG_IP_MROUTE - && (optname < MRT_BASE || optname > MRT_BASE+10) -#endif - ) { + if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS && + !ip_mroute_opt(optname)) { int len; if (get_user(len, optlen)) diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c index ca1b5fdb8d31..2c44a94c2135 100644 --- a/net/ipv4/ipcomp.c +++ b/net/ipv4/ipcomp.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <asm/semaphore.h> #include <linux/crypto.h> +#include <linux/err.h> #include <linux/pfkeyv2.h> #include <linux/percpu.h> #include <linux/smp.h> @@ -344,7 +345,7 @@ static struct crypto_comp **ipcomp_alloc_tfms(const char *alg_name) for_each_possible_cpu(cpu) { struct crypto_comp *tfm = crypto_alloc_comp(alg_name, 0, CRYPTO_ALG_ASYNC); - if (!tfm) + if (IS_ERR(tfm)) goto error; *per_cpu_ptr(tfms, cpu) = tfm; } diff --git a/net/ipv4/ipvs/ip_vs_conn.c b/net/ipv4/ipvs/ip_vs_conn.c index 4b702f708d30..b7eeae622d9b 100644 --- a/net/ipv4/ipvs/ip_vs_conn.c +++ b/net/ipv4/ipvs/ip_vs_conn.c @@ -426,6 +426,25 @@ ip_vs_bind_dest(struct ip_vs_conn *cp, struct ip_vs_dest *dest) /* + * Check if there is a destination for the connection, if so + * bind the connection to the destination. + */ +struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp) +{ + struct ip_vs_dest *dest; + + if ((cp) && (!cp->dest)) { + dest = ip_vs_find_dest(cp->daddr, cp->dport, + cp->vaddr, cp->vport, cp->protocol); + ip_vs_bind_dest(cp, dest); + return dest; + } else + return NULL; +} +EXPORT_SYMBOL(ip_vs_try_bind_dest); + + +/* * Unbind a connection entry with its VS destination * Called by the ip_vs_conn_expire function. */ diff --git a/net/ipv4/ipvs/ip_vs_core.c b/net/ipv4/ipvs/ip_vs_core.c index c6ed7654e839..20c884a57721 100644 --- a/net/ipv4/ipvs/ip_vs_core.c +++ b/net/ipv4/ipvs/ip_vs_core.c @@ -979,15 +979,23 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, ret = NF_ACCEPT; } - /* increase its packet counter and check if it is needed - to be synchronized */ + /* Increase its packet counter and check if it is needed + * to be synchronized + * + * Sync connection if it is about to close to + * encorage the standby servers to update the connections timeout + */ atomic_inc(&cp->in_pkts); if ((ip_vs_sync_state & IP_VS_STATE_MASTER) && - (cp->protocol != IPPROTO_TCP || - cp->state == IP_VS_TCP_S_ESTABLISHED) && - (atomic_read(&cp->in_pkts) % sysctl_ip_vs_sync_threshold[1] - == sysctl_ip_vs_sync_threshold[0])) + (((cp->protocol != IPPROTO_TCP || + cp->state == IP_VS_TCP_S_ESTABLISHED) && + (atomic_read(&cp->in_pkts) % sysctl_ip_vs_sync_threshold[1] + == sysctl_ip_vs_sync_threshold[0])) || + ((cp->protocol == IPPROTO_TCP) && (cp->old_state != cp->state) && + ((cp->state == IP_VS_TCP_S_FIN_WAIT) || + (cp->state == IP_VS_TCP_S_CLOSE))))) ip_vs_sync_conn(cp); + cp->old_state = cp->state; ip_vs_conn_put(cp); return ret; diff --git a/net/ipv4/ipvs/ip_vs_ctl.c b/net/ipv4/ipvs/ip_vs_ctl.c index 7345fc252a23..3c4d22a468ec 100644 --- a/net/ipv4/ipvs/ip_vs_ctl.c +++ b/net/ipv4/ipvs/ip_vs_ctl.c @@ -579,6 +579,32 @@ ip_vs_lookup_dest(struct ip_vs_service *svc, __be32 daddr, __be16 dport) return NULL; } +/* + * Find destination by {daddr,dport,vaddr,protocol} + * Cretaed to be used in ip_vs_process_message() in + * the backup synchronization daemon. It finds the + * destination to be bound to the received connection + * on the backup. + * + * ip_vs_lookup_real_service() looked promissing, but + * seems not working as expected. + */ +struct ip_vs_dest *ip_vs_find_dest(__be32 daddr, __be16 dport, + __be32 vaddr, __be16 vport, __u16 protocol) +{ + struct ip_vs_dest *dest; + struct ip_vs_service *svc; + + svc = ip_vs_service_get(0, protocol, vaddr, vport); + if (!svc) + return NULL; + dest = ip_vs_lookup_dest(svc, daddr, dport); + if (dest) + atomic_inc(&dest->refcnt); + ip_vs_service_put(svc); + return dest; +} +EXPORT_SYMBOL(ip_vs_find_dest); /* * Lookup dest by {svc,addr,port} in the destination trash. diff --git a/net/ipv4/ipvs/ip_vs_sync.c b/net/ipv4/ipvs/ip_vs_sync.c index 0d4d9721cbd4..bd930efc18da 100644 --- a/net/ipv4/ipvs/ip_vs_sync.c +++ b/net/ipv4/ipvs/ip_vs_sync.c @@ -284,6 +284,7 @@ static void ip_vs_process_message(const char *buffer, const size_t buflen) struct ip_vs_sync_conn_options *opt; struct ip_vs_conn *cp; struct ip_vs_protocol *pp; + struct ip_vs_dest *dest; char *p; int i; @@ -317,20 +318,34 @@ static void ip_vs_process_message(const char *buffer, const size_t buflen) s->caddr, s->cport, s->vaddr, s->vport); if (!cp) { + /* + * Find the appropriate destination for the connection. + * If it is not found the connection will remain unbound + * but still handled. + */ + dest = ip_vs_find_dest(s->daddr, s->dport, + s->vaddr, s->vport, + s->protocol); cp = ip_vs_conn_new(s->protocol, s->caddr, s->cport, s->vaddr, s->vport, s->daddr, s->dport, - flags, NULL); + flags, dest); + if (dest) + atomic_dec(&dest->refcnt); if (!cp) { IP_VS_ERR("ip_vs_conn_new failed\n"); return; } cp->state = ntohs(s->state); } else if (!cp->dest) { - /* it is an entry created by the synchronization */ - cp->state = ntohs(s->state); - cp->flags = flags | IP_VS_CONN_F_HASHED; + dest = ip_vs_try_bind_dest(cp); + if (!dest) { + /* it is an unbound entry created by + * synchronization */ + cp->flags = flags | IP_VS_CONN_F_HASHED; + } else + atomic_dec(&dest->refcnt); } /* Note that we don't touch its state and flags if it is a normal entry. */ @@ -342,6 +357,7 @@ static void ip_vs_process_message(const char *buffer, const size_t buflen) p += SIMPLE_CONN_SIZE; atomic_set(&cp->in_pkts, sysctl_ip_vs_sync_threshold[0]); + cp->state = ntohs(s->state); pp = ip_vs_proto_get(s->protocol); cp->timeout = pp->timeout_table[cp->state]; ip_vs_conn_put(cp); diff --git a/net/ipv4/netfilter/Makefile b/net/ipv4/netfilter/Makefile index 409d273f6f82..7456833d6ade 100644 --- a/net/ipv4/netfilter/Makefile +++ b/net/ipv4/netfilter/Makefile @@ -41,27 +41,27 @@ obj-$(CONFIG_NF_NAT) += iptable_nat.o obj-$(CONFIG_IP_NF_RAW) += iptable_raw.o # matches +obj-$(CONFIG_IP_NF_MATCH_ADDRTYPE) += ipt_addrtype.o +obj-$(CONFIG_IP_NF_MATCH_AH) += ipt_ah.o +obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn.o obj-$(CONFIG_IP_NF_MATCH_IPRANGE) += ipt_iprange.o obj-$(CONFIG_IP_NF_MATCH_OWNER) += ipt_owner.o -obj-$(CONFIG_IP_NF_MATCH_TOS) += ipt_tos.o obj-$(CONFIG_IP_NF_MATCH_RECENT) += ipt_recent.o -obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn.o -obj-$(CONFIG_IP_NF_MATCH_AH) += ipt_ah.o +obj-$(CONFIG_IP_NF_MATCH_TOS) += ipt_tos.o obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o -obj-$(CONFIG_IP_NF_MATCH_ADDRTYPE) += ipt_addrtype.o # targets -obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o -obj-$(CONFIG_IP_NF_TARGET_TOS) += ipt_TOS.o +obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o +obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o -obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o +obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o +obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o obj-$(CONFIG_IP_NF_TARGET_SAME) += ipt_SAME.o -obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o -obj-$(CONFIG_IP_NF_TARGET_ULOG) += ipt_ULOG.o -obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o +obj-$(CONFIG_IP_NF_TARGET_TOS) += ipt_TOS.o obj-$(CONFIG_IP_NF_TARGET_TTL) += ipt_TTL.o +obj-$(CONFIG_IP_NF_TARGET_ULOG) += ipt_ULOG.o # generic ARP tables obj-$(CONFIG_IP_NF_ARPTABLES) += arp_tables.o diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c index 10a2ce09fd8e..14d64a383db1 100644 --- a/net/ipv4/netfilter/ip_queue.c +++ b/net/ipv4/netfilter/ip_queue.c @@ -22,6 +22,7 @@ #include <linux/spinlock.h> #include <linux/sysctl.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/security.h> #include <linux/mutex.h> #include <net/net_namespace.h> @@ -607,15 +608,11 @@ static ctl_table ipq_root_table[] = { { .ctl_name = 0 } }; -#ifdef CONFIG_PROC_FS -static int -ipq_get_info(char *buffer, char **start, off_t offset, int length) +static int ip_queue_show(struct seq_file *m, void *v) { - int len; - read_lock_bh(&queue_lock); - len = sprintf(buffer, + seq_printf(m, "Peer PID : %d\n" "Copy mode : %hu\n" "Copy range : %u\n" @@ -632,16 +629,21 @@ ipq_get_info(char *buffer, char **start, off_t offset, int length) queue_user_dropped); read_unlock_bh(&queue_lock); + return 0; +} - *start = buffer + offset; - len -= offset; - if (len > length) - len = length; - else if (len < 0) - len = 0; - return len; +static int ip_queue_open(struct inode *inode, struct file *file) +{ + return single_open(file, ip_queue_show, NULL); } -#endif /* CONFIG_PROC_FS */ + +static const struct file_operations ip_queue_proc_fops = { + .open = ip_queue_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; static struct nf_queue_handler nfqh = { .name = "ip_queue", @@ -661,10 +663,11 @@ static int __init ip_queue_init(void) goto cleanup_netlink_notifier; } - proc = proc_net_create(&init_net, IPQ_PROC_FS_NAME, 0, ipq_get_info); - if (proc) + proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net); + if (proc) { proc->owner = THIS_MODULE; - else { + proc->proc_fops = &ip_queue_proc_fops; + } else { printk(KERN_ERR "ip_queue: failed to create proc entry\n"); goto cleanup_ipqnl; } diff --git a/net/ipv4/netfilter/nf_nat_amanda.c b/net/ipv4/netfilter/nf_nat_amanda.c index 35a5aa69cd92..c31b87668250 100644 --- a/net/ipv4/netfilter/nf_nat_amanda.c +++ b/net/ipv4/netfilter/nf_nat_amanda.c @@ -69,7 +69,7 @@ static void __exit nf_nat_amanda_fini(void) static int __init nf_nat_amanda_init(void) { - BUG_ON(rcu_dereference(nf_nat_amanda_hook)); + BUG_ON(nf_nat_amanda_hook != NULL); rcu_assign_pointer(nf_nat_amanda_hook, help); return 0; } diff --git a/net/ipv4/netfilter/nf_nat_ftp.c b/net/ipv4/netfilter/nf_nat_ftp.c index e1a16d3ea4cb..a1d5d58a58bf 100644 --- a/net/ipv4/netfilter/nf_nat_ftp.c +++ b/net/ipv4/netfilter/nf_nat_ftp.c @@ -147,7 +147,7 @@ static void __exit nf_nat_ftp_fini(void) static int __init nf_nat_ftp_init(void) { - BUG_ON(rcu_dereference(nf_nat_ftp_hook)); + BUG_ON(nf_nat_ftp_hook != NULL); rcu_assign_pointer(nf_nat_ftp_hook, nf_nat_ftp); return 0; } diff --git a/net/ipv4/netfilter/nf_nat_h323.c b/net/ipv4/netfilter/nf_nat_h323.c index a868c8c41328..93e18ef114f2 100644 --- a/net/ipv4/netfilter/nf_nat_h323.c +++ b/net/ipv4/netfilter/nf_nat_h323.c @@ -544,15 +544,15 @@ static int nat_callforwarding(struct sk_buff *skb, struct nf_conn *ct, /****************************************************************************/ static int __init init(void) { - BUG_ON(rcu_dereference(set_h245_addr_hook) != NULL); - BUG_ON(rcu_dereference(set_h225_addr_hook) != NULL); - BUG_ON(rcu_dereference(set_sig_addr_hook) != NULL); - BUG_ON(rcu_dereference(set_ras_addr_hook) != NULL); - BUG_ON(rcu_dereference(nat_rtp_rtcp_hook) != NULL); - BUG_ON(rcu_dereference(nat_t120_hook) != NULL); - BUG_ON(rcu_dereference(nat_h245_hook) != NULL); - BUG_ON(rcu_dereference(nat_callforwarding_hook) != NULL); - BUG_ON(rcu_dereference(nat_q931_hook) != NULL); + BUG_ON(set_h245_addr_hook != NULL); + BUG_ON(set_h225_addr_hook != NULL); + BUG_ON(set_sig_addr_hook != NULL); + BUG_ON(set_ras_addr_hook != NULL); + BUG_ON(nat_rtp_rtcp_hook != NULL); + BUG_ON(nat_t120_hook != NULL); + BUG_ON(nat_h245_hook != NULL); + BUG_ON(nat_callforwarding_hook != NULL); + BUG_ON(nat_q931_hook != NULL); rcu_assign_pointer(set_h245_addr_hook, set_h245_addr); rcu_assign_pointer(set_h225_addr_hook, set_h225_addr); diff --git a/net/ipv4/netfilter/nf_nat_irc.c b/net/ipv4/netfilter/nf_nat_irc.c index 766e2c16c6b9..fe6f9cef6c85 100644 --- a/net/ipv4/netfilter/nf_nat_irc.c +++ b/net/ipv4/netfilter/nf_nat_irc.c @@ -74,7 +74,7 @@ static void __exit nf_nat_irc_fini(void) static int __init nf_nat_irc_init(void) { - BUG_ON(rcu_dereference(nf_nat_irc_hook)); + BUG_ON(nf_nat_irc_hook != NULL); rcu_assign_pointer(nf_nat_irc_hook, help); return 0; } diff --git a/net/ipv4/netfilter/nf_nat_pptp.c b/net/ipv4/netfilter/nf_nat_pptp.c index e1385a099079..6817e7995f35 100644 --- a/net/ipv4/netfilter/nf_nat_pptp.c +++ b/net/ipv4/netfilter/nf_nat_pptp.c @@ -281,16 +281,16 @@ static int __init nf_nat_helper_pptp_init(void) { nf_nat_need_gre(); - BUG_ON(rcu_dereference(nf_nat_pptp_hook_outbound)); + BUG_ON(nf_nat_pptp_hook_outbound != NULL); rcu_assign_pointer(nf_nat_pptp_hook_outbound, pptp_outbound_pkt); - BUG_ON(rcu_dereference(nf_nat_pptp_hook_inbound)); + BUG_ON(nf_nat_pptp_hook_inbound != NULL); rcu_assign_pointer(nf_nat_pptp_hook_inbound, pptp_inbound_pkt); - BUG_ON(rcu_dereference(nf_nat_pptp_hook_exp_gre)); + BUG_ON(nf_nat_pptp_hook_exp_gre != NULL); rcu_assign_pointer(nf_nat_pptp_hook_exp_gre, pptp_exp_gre); - BUG_ON(rcu_dereference(nf_nat_pptp_hook_expectfn)); + BUG_ON(nf_nat_pptp_hook_expectfn != NULL); rcu_assign_pointer(nf_nat_pptp_hook_expectfn, pptp_nat_expected); return 0; } diff --git a/net/ipv4/netfilter/nf_nat_sip.c b/net/ipv4/netfilter/nf_nat_sip.c index ce9edbcc01e3..3ca98971a1e9 100644 --- a/net/ipv4/netfilter/nf_nat_sip.c +++ b/net/ipv4/netfilter/nf_nat_sip.c @@ -293,8 +293,8 @@ static void __exit nf_nat_sip_fini(void) static int __init nf_nat_sip_init(void) { - BUG_ON(rcu_dereference(nf_nat_sip_hook)); - BUG_ON(rcu_dereference(nf_nat_sdp_hook)); + BUG_ON(nf_nat_sip_hook != NULL); + BUG_ON(nf_nat_sdp_hook != NULL); rcu_assign_pointer(nf_nat_sip_hook, ip_nat_sip); rcu_assign_pointer(nf_nat_sdp_hook, ip_nat_sdp); return 0; diff --git a/net/ipv4/netfilter/nf_nat_tftp.c b/net/ipv4/netfilter/nf_nat_tftp.c index 0ecec701cb44..1360a94766dd 100644 --- a/net/ipv4/netfilter/nf_nat_tftp.c +++ b/net/ipv4/netfilter/nf_nat_tftp.c @@ -43,7 +43,7 @@ static void __exit nf_nat_tftp_fini(void) static int __init nf_nat_tftp_init(void) { - BUG_ON(rcu_dereference(nf_nat_tftp_hook)); + BUG_ON(nf_nat_tftp_hook != NULL); rcu_assign_pointer(nf_nat_tftp_hook, help); return 0; } diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c index ffdccc0972e0..ce34b281803f 100644 --- a/net/ipv4/proc.c +++ b/net/ipv4/proc.c @@ -46,17 +46,6 @@ #include <net/sock.h> #include <net/raw.h> -static int fold_prot_inuse(struct proto *proto) -{ - int res = 0; - int cpu; - - for_each_possible_cpu(cpu) - res += proto->stats[cpu].inuse; - - return res; -} - /* * Report socket allocation statistics [mea@utu.fi] */ @@ -64,12 +53,12 @@ static int sockstat_seq_show(struct seq_file *seq, void *v) { socket_seq_show(seq); seq_printf(seq, "TCP: inuse %d orphan %d tw %d alloc %d mem %d\n", - fold_prot_inuse(&tcp_prot), atomic_read(&tcp_orphan_count), + sock_prot_inuse(&tcp_prot), atomic_read(&tcp_orphan_count), tcp_death_row.tw_count, atomic_read(&tcp_sockets_allocated), atomic_read(&tcp_memory_allocated)); - seq_printf(seq, "UDP: inuse %d\n", fold_prot_inuse(&udp_prot)); - seq_printf(seq, "UDPLITE: inuse %d\n", fold_prot_inuse(&udplite_prot)); - seq_printf(seq, "RAW: inuse %d\n", fold_prot_inuse(&raw_prot)); + seq_printf(seq, "UDP: inuse %d\n", sock_prot_inuse(&udp_prot)); + seq_printf(seq, "UDPLITE: inuse %d\n", sock_prot_inuse(&udplite_prot)); + seq_printf(seq, "RAW: inuse %d\n", sock_prot_inuse(&raw_prot)); seq_printf(seq, "FRAG: inuse %d memory %d\n", ip_frag_nqueues(), ip_frag_mem()); return 0; diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index 3916faca3afe..66b42f547bf9 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -760,6 +760,8 @@ static int raw_ioctl(struct sock *sk, int cmd, unsigned long arg) } } +DEFINE_PROTO_INUSE(raw) + struct proto raw_prot = { .name = "RAW", .owner = THIS_MODULE, @@ -781,6 +783,7 @@ struct proto raw_prot = { .compat_setsockopt = compat_raw_setsockopt, .compat_getsockopt = compat_raw_getsockopt, #endif + REF_PROTO_INUSE(raw) }; #ifdef CONFIG_PROC_FS diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index c64072bb504b..8e65182f7af1 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2456,11 +2456,11 @@ void __init tcp_init(void) thash_entries ? 0 : 512 * 1024); tcp_hashinfo.ehash_size = 1 << tcp_hashinfo.ehash_size; for (i = 0; i < tcp_hashinfo.ehash_size; i++) { - rwlock_init(&tcp_hashinfo.ehash[i].lock); INIT_HLIST_HEAD(&tcp_hashinfo.ehash[i].chain); INIT_HLIST_HEAD(&tcp_hashinfo.ehash[i].twchain); } - + if (inet_ehash_locks_alloc(&tcp_hashinfo)) + panic("TCP: failed to alloc ehash_locks"); tcp_hashinfo.bhash = alloc_large_system_hash("TCP bind", sizeof(struct inet_bind_hashbucket), diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index d438dfb0c8f3..e566f3c67677 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -2049,8 +2049,9 @@ static void *established_get_first(struct seq_file *seq) struct sock *sk; struct hlist_node *node; struct inet_timewait_sock *tw; + rwlock_t *lock = inet_ehash_lockp(&tcp_hashinfo, st->bucket); - read_lock_bh(&tcp_hashinfo.ehash[st->bucket].lock); + read_lock_bh(lock); sk_for_each(sk, node, &tcp_hashinfo.ehash[st->bucket].chain) { if (sk->sk_family != st->family) { continue; @@ -2067,7 +2068,7 @@ static void *established_get_first(struct seq_file *seq) rc = tw; goto out; } - read_unlock_bh(&tcp_hashinfo.ehash[st->bucket].lock); + read_unlock_bh(lock); st->state = TCP_SEQ_STATE_ESTABLISHED; } out: @@ -2094,11 +2095,11 @@ get_tw: cur = tw; goto out; } - read_unlock_bh(&tcp_hashinfo.ehash[st->bucket].lock); + read_unlock_bh(inet_ehash_lockp(&tcp_hashinfo, st->bucket)); st->state = TCP_SEQ_STATE_ESTABLISHED; if (++st->bucket < tcp_hashinfo.ehash_size) { - read_lock_bh(&tcp_hashinfo.ehash[st->bucket].lock); + read_lock_bh(inet_ehash_lockp(&tcp_hashinfo, st->bucket)); sk = sk_head(&tcp_hashinfo.ehash[st->bucket].chain); } else { cur = NULL; @@ -2206,7 +2207,7 @@ static void tcp_seq_stop(struct seq_file *seq, void *v) case TCP_SEQ_STATE_TIME_WAIT: case TCP_SEQ_STATE_ESTABLISHED: if (v) - read_unlock_bh(&tcp_hashinfo.ehash[st->bucket].lock); + read_unlock_bh(inet_ehash_lockp(&tcp_hashinfo, st->bucket)); break; } } @@ -2417,6 +2418,8 @@ void tcp4_proc_exit(void) } #endif /* CONFIG_PROC_FS */ +DEFINE_PROTO_INUSE(tcp) + struct proto tcp_prot = { .name = "TCP", .owner = THIS_MODULE, @@ -2451,6 +2454,7 @@ struct proto tcp_prot = { .compat_setsockopt = compat_tcp_setsockopt, .compat_getsockopt = compat_tcp_getsockopt, #endif + REF_PROTO_INUSE(tcp) }; void __init tcp_v4_init(struct net_proto_family *ops) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 4bc25b46f33f..03c400ca14c5 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1430,6 +1430,8 @@ unsigned int udp_poll(struct file *file, struct socket *sock, poll_table *wait) } +DEFINE_PROTO_INUSE(udp) + struct proto udp_prot = { .name = "UDP", .owner = THIS_MODULE, @@ -1452,6 +1454,7 @@ struct proto udp_prot = { .compat_setsockopt = compat_udp_setsockopt, .compat_getsockopt = compat_udp_getsockopt, #endif + REF_PROTO_INUSE(udp) }; /* ------------------------------------------------------------------------ */ diff --git a/net/ipv4/udplite.c b/net/ipv4/udplite.c index 94977205abb4..f5baeb3e8b85 100644 --- a/net/ipv4/udplite.c +++ b/net/ipv4/udplite.c @@ -44,6 +44,8 @@ static struct net_protocol udplite_protocol = { .no_policy = 1, }; +DEFINE_PROTO_INUSE(udplite) + struct proto udplite_prot = { .name = "UDP-Lite", .owner = THIS_MODULE, @@ -67,6 +69,7 @@ struct proto udplite_prot = { .compat_setsockopt = compat_udp_setsockopt, .compat_getsockopt = compat_udp_getsockopt, #endif + REF_PROTO_INUSE(udplite) }; static struct inet_protosw udplite4_protosw = { diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c index d6f1026f1943..adc73adadfae 100644 --- a/net/ipv6/inet6_hashtables.c +++ b/net/ipv6/inet6_hashtables.c @@ -37,9 +37,8 @@ void __inet6_hash(struct inet_hashinfo *hashinfo, } else { unsigned int hash; sk->sk_hash = hash = inet6_sk_ehashfn(sk); - hash &= (hashinfo->ehash_size - 1); - list = &hashinfo->ehash[hash].chain; - lock = &hashinfo->ehash[hash].lock; + list = &inet_ehash_bucket(hashinfo, hash)->chain; + lock = inet_ehash_lockp(hashinfo, hash); write_lock(lock); } @@ -70,9 +69,10 @@ struct sock *__inet6_lookup_established(struct inet_hashinfo *hashinfo, */ unsigned int hash = inet6_ehashfn(daddr, hnum, saddr, sport); struct inet_ehash_bucket *head = inet_ehash_bucket(hashinfo, hash); + rwlock_t *lock = inet_ehash_lockp(hashinfo, hash); prefetch(head->chain.first); - read_lock(&head->lock); + read_lock(lock); sk_for_each(sk, node, &head->chain) { /* For IPV6 do the cheaper port and family tests first. */ if (INET6_MATCH(sk, hash, saddr, daddr, ports, dif)) @@ -92,12 +92,12 @@ struct sock *__inet6_lookup_established(struct inet_hashinfo *hashinfo, goto hit; } } - read_unlock(&head->lock); + read_unlock(lock); return NULL; hit: sock_hold(sk); - read_unlock(&head->lock); + read_unlock(lock); return sk; } EXPORT_SYMBOL(__inet6_lookup_established); @@ -175,12 +175,13 @@ static int __inet6_check_established(struct inet_timewait_death_row *death_row, const unsigned int hash = inet6_ehashfn(daddr, lport, saddr, inet->dport); struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash); + rwlock_t *lock = inet_ehash_lockp(hinfo, hash); struct sock *sk2; const struct hlist_node *node; struct inet_timewait_sock *tw; prefetch(head->chain.first); - write_lock(&head->lock); + write_lock(lock); /* Check TIME-WAIT sockets first. */ sk_for_each(sk2, node, &head->twchain) { @@ -216,7 +217,7 @@ unique: __sk_add_node(sk, &head->chain); sk->sk_hash = hash; sock_prot_inc_use(sk->sk_prot); - write_unlock(&head->lock); + write_unlock(lock); if (twp != NULL) { *twp = tw; @@ -231,7 +232,7 @@ unique: return 0; not_unique: - write_unlock(&head->lock); + write_unlock(lock); return -EADDRNOTAVAIL; } diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 653fc0a8235b..86e1835ce4e4 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1339,6 +1339,19 @@ error: return err; } +static void ip6_cork_release(struct inet_sock *inet, struct ipv6_pinfo *np) +{ + inet->cork.flags &= ~IPCORK_OPT; + kfree(np->cork.opt); + np->cork.opt = NULL; + if (np->cork.rt) { + dst_release(&np->cork.rt->u.dst); + np->cork.rt = NULL; + inet->cork.flags &= ~IPCORK_ALLFRAG; + } + memset(&inet->cork.fl, 0, sizeof(inet->cork.fl)); +} + int ip6_push_pending_frames(struct sock *sk) { struct sk_buff *skb, *tmp_skb; @@ -1415,15 +1428,7 @@ int ip6_push_pending_frames(struct sock *sk) } out: - inet->cork.flags &= ~IPCORK_OPT; - kfree(np->cork.opt); - np->cork.opt = NULL; - if (np->cork.rt) { - dst_release(&np->cork.rt->u.dst); - np->cork.rt = NULL; - inet->cork.flags &= ~IPCORK_ALLFRAG; - } - memset(&inet->cork.fl, 0, sizeof(inet->cork.fl)); + ip6_cork_release(inet, np); return err; error: goto out; @@ -1431,8 +1436,6 @@ error: void ip6_flush_pending_frames(struct sock *sk) { - struct inet_sock *inet = inet_sk(sk); - struct ipv6_pinfo *np = inet6_sk(sk); struct sk_buff *skb; while ((skb = __skb_dequeue_tail(&sk->sk_write_queue)) != NULL) { @@ -1442,14 +1445,5 @@ void ip6_flush_pending_frames(struct sock *sk) kfree_skb(skb); } - inet->cork.flags &= ~IPCORK_OPT; - - kfree(np->cork.opt); - np->cork.opt = NULL; - if (np->cork.rt) { - dst_release(&np->cork.rt->u.dst); - np->cork.rt = NULL; - inet->cork.flags &= ~IPCORK_ALLFRAG; - } - memset(&inet->cork.fl, 0, sizeof(inet->cork.fl)); + ip6_cork_release(inet_sk(sk), inet6_sk(sk)); } diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c index 85eb4798d8d2..0cd4056f9127 100644 --- a/net/ipv6/ipcomp6.c +++ b/net/ipv6/ipcomp6.c @@ -36,6 +36,7 @@ #include <net/ipcomp.h> #include <asm/semaphore.h> #include <linux/crypto.h> +#include <linux/err.h> #include <linux/pfkeyv2.h> #include <linux/random.h> #include <linux/percpu.h> @@ -358,7 +359,7 @@ static struct crypto_comp **ipcomp6_alloc_tfms(const char *alg_name) for_each_possible_cpu(cpu) { struct crypto_comp *tfm = crypto_alloc_comp(alg_name, 0, CRYPTO_ALG_ASYNC); - if (!tfm) + if (IS_ERR(tfm)) goto error; *per_cpu_ptr(tfms, cpu) = tfm; } diff --git a/net/ipv6/netfilter/Makefile b/net/ipv6/netfilter/Makefile index 4513eab77397..e789ec44d23b 100644 --- a/net/ipv6/netfilter/Makefile +++ b/net/ipv6/netfilter/Makefile @@ -4,25 +4,29 @@ # Link order matters here. obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o -obj-$(CONFIG_IP6_NF_MATCH_RT) += ip6t_rt.o -obj-$(CONFIG_IP6_NF_MATCH_OPTS) += ip6t_hbh.o -obj-$(CONFIG_IP6_NF_MATCH_IPV6HEADER) += ip6t_ipv6header.o -obj-$(CONFIG_IP6_NF_MATCH_FRAG) += ip6t_frag.o -obj-$(CONFIG_IP6_NF_MATCH_AH) += ip6t_ah.o -obj-$(CONFIG_IP6_NF_MATCH_EUI64) += ip6t_eui64.o -obj-$(CONFIG_IP6_NF_MATCH_OWNER) += ip6t_owner.o obj-$(CONFIG_IP6_NF_FILTER) += ip6table_filter.o obj-$(CONFIG_IP6_NF_MANGLE) += ip6table_mangle.o -obj-$(CONFIG_IP6_NF_TARGET_HL) += ip6t_HL.o obj-$(CONFIG_IP6_NF_QUEUE) += ip6_queue.o -obj-$(CONFIG_IP6_NF_TARGET_LOG) += ip6t_LOG.o obj-$(CONFIG_IP6_NF_RAW) += ip6table_raw.o -obj-$(CONFIG_IP6_NF_MATCH_HL) += ip6t_hl.o -obj-$(CONFIG_IP6_NF_TARGET_REJECT) += ip6t_REJECT.o -obj-$(CONFIG_IP6_NF_MATCH_MH) += ip6t_mh.o # objects for l3 independent conntrack nf_conntrack_ipv6-objs := nf_conntrack_l3proto_ipv6.o nf_conntrack_proto_icmpv6.o nf_conntrack_reasm.o # l3 independent conntrack obj-$(CONFIG_NF_CONNTRACK_IPV6) += nf_conntrack_ipv6.o + +# matches +obj-$(CONFIG_IP6_NF_MATCH_AH) += ip6t_ah.o +obj-$(CONFIG_IP6_NF_MATCH_EUI64) += ip6t_eui64.o +obj-$(CONFIG_IP6_NF_MATCH_FRAG) += ip6t_frag.o +obj-$(CONFIG_IP6_NF_MATCH_HL) += ip6t_hl.o +obj-$(CONFIG_IP6_NF_MATCH_IPV6HEADER) += ip6t_ipv6header.o +obj-$(CONFIG_IP6_NF_MATCH_MH) += ip6t_mh.o +obj-$(CONFIG_IP6_NF_MATCH_OPTS) += ip6t_hbh.o +obj-$(CONFIG_IP6_NF_MATCH_OWNER) += ip6t_owner.o +obj-$(CONFIG_IP6_NF_MATCH_RT) += ip6t_rt.o + +# targets +obj-$(CONFIG_IP6_NF_TARGET_HL) += ip6t_HL.o +obj-$(CONFIG_IP6_NF_TARGET_LOG) += ip6t_LOG.o +obj-$(CONFIG_IP6_NF_TARGET_REJECT) += ip6t_REJECT.o diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c index 6413a30d9f68..e273605eef85 100644 --- a/net/ipv6/netfilter/ip6_queue.c +++ b/net/ipv6/netfilter/ip6_queue.c @@ -23,6 +23,7 @@ #include <linux/spinlock.h> #include <linux/sysctl.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/mutex.h> #include <net/net_namespace.h> #include <net/sock.h> @@ -596,15 +597,11 @@ static ctl_table ipq_root_table[] = { { .ctl_name = 0 } }; -#ifdef CONFIG_PROC_FS -static int -ipq_get_info(char *buffer, char **start, off_t offset, int length) +static int ip6_queue_show(struct seq_file *m, void *v) { - int len; - read_lock_bh(&queue_lock); - len = sprintf(buffer, + seq_printf(m, "Peer PID : %d\n" "Copy mode : %hu\n" "Copy range : %u\n" @@ -621,16 +618,21 @@ ipq_get_info(char *buffer, char **start, off_t offset, int length) queue_user_dropped); read_unlock_bh(&queue_lock); + return 0; +} - *start = buffer + offset; - len -= offset; - if (len > length) - len = length; - else if (len < 0) - len = 0; - return len; +static int ip6_queue_open(struct inode *inode, struct file *file) +{ + return single_open(file, ip6_queue_show, NULL); } -#endif /* CONFIG_PROC_FS */ + +static const struct file_operations ip6_queue_proc_fops = { + .open = ip6_queue_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; static struct nf_queue_handler nfqh = { .name = "ip6_queue", @@ -650,10 +652,11 @@ static int __init ip6_queue_init(void) goto cleanup_netlink_notifier; } - proc = proc_net_create(&init_net, IPQ_PROC_FS_NAME, 0, ipq_get_info); - if (proc) + proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net); + if (proc) { proc->owner = THIS_MODULE; - else { + proc->proc_fops = &ip6_queue_proc_fops; + } else { printk(KERN_ERR "ip6_queue: failed to create proc entry\n"); goto cleanup_ipqnl; } diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index be526ad92543..8631ed7fe8a9 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -32,27 +32,16 @@ static struct proc_dir_entry *proc_net_devsnmp6; -static int fold_prot_inuse(struct proto *proto) -{ - int res = 0; - int cpu; - - for_each_possible_cpu(cpu) - res += proto->stats[cpu].inuse; - - return res; -} - static int sockstat6_seq_show(struct seq_file *seq, void *v) { seq_printf(seq, "TCP6: inuse %d\n", - fold_prot_inuse(&tcpv6_prot)); + sock_prot_inuse(&tcpv6_prot)); seq_printf(seq, "UDP6: inuse %d\n", - fold_prot_inuse(&udpv6_prot)); + sock_prot_inuse(&udpv6_prot)); seq_printf(seq, "UDPLITE6: inuse %d\n", - fold_prot_inuse(&udplitev6_prot)); + sock_prot_inuse(&udplitev6_prot)); seq_printf(seq, "RAW6: inuse %d\n", - fold_prot_inuse(&rawv6_prot)); + sock_prot_inuse(&rawv6_prot)); seq_printf(seq, "FRAG6: inuse %d memory %d\n", ip6_frag_nqueues(), ip6_frag_mem()); return 0; diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index ca24ef19cd8f..807260d03586 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -1144,6 +1144,8 @@ static int rawv6_init_sk(struct sock *sk) return(0); } +DEFINE_PROTO_INUSE(rawv6) + struct proto rawv6_prot = { .name = "RAWv6", .owner = THIS_MODULE, @@ -1166,6 +1168,7 @@ struct proto rawv6_prot = { .compat_setsockopt = compat_rawv6_setsockopt, .compat_getsockopt = compat_rawv6_getsockopt, #endif + REF_PROTO_INUSE(rawv6) }; #ifdef CONFIG_PROC_FS diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 95f8e4a62f68..973a97abc446 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -38,12 +38,8 @@ #include <linux/in6.h> #include <linux/init.h> #include <linux/if_arp.h> - -#ifdef CONFIG_PROC_FS #include <linux/proc_fs.h> #include <linux/seq_file.h> -#endif - #include <net/net_namespace.h> #include <net/snmp.h> #include <net/ipv6.h> @@ -2288,71 +2284,50 @@ struct rt6_proc_arg static int rt6_info_route(struct rt6_info *rt, void *p_arg) { - struct rt6_proc_arg *arg = (struct rt6_proc_arg *) p_arg; + struct seq_file *m = p_arg; - if (arg->skip < arg->offset / RT6_INFO_LEN) { - arg->skip++; - return 0; - } - - if (arg->len >= arg->length) - return 0; - - arg->len += sprintf(arg->buffer + arg->len, - NIP6_SEQFMT " %02x ", - NIP6(rt->rt6i_dst.addr), - rt->rt6i_dst.plen); + seq_printf(m, NIP6_SEQFMT " %02x ", NIP6(rt->rt6i_dst.addr), + rt->rt6i_dst.plen); #ifdef CONFIG_IPV6_SUBTREES - arg->len += sprintf(arg->buffer + arg->len, - NIP6_SEQFMT " %02x ", - NIP6(rt->rt6i_src.addr), - rt->rt6i_src.plen); + seq_printf(m, NIP6_SEQFMT " %02x ", NIP6(rt->rt6i_src.addr), + rt->rt6i_src.plen); #else - arg->len += sprintf(arg->buffer + arg->len, - "00000000000000000000000000000000 00 "); + seq_puts(m, "00000000000000000000000000000000 00 "); #endif if (rt->rt6i_nexthop) { - arg->len += sprintf(arg->buffer + arg->len, - NIP6_SEQFMT, - NIP6(*((struct in6_addr *)rt->rt6i_nexthop->primary_key))); + seq_printf(m, NIP6_SEQFMT, + NIP6(*((struct in6_addr *)rt->rt6i_nexthop->primary_key))); } else { - arg->len += sprintf(arg->buffer + arg->len, - "00000000000000000000000000000000"); + seq_puts(m, "00000000000000000000000000000000"); } - arg->len += sprintf(arg->buffer + arg->len, - " %08x %08x %08x %08x %8s\n", - rt->rt6i_metric, atomic_read(&rt->u.dst.__refcnt), - rt->u.dst.__use, rt->rt6i_flags, - rt->rt6i_dev ? rt->rt6i_dev->name : ""); + seq_printf(m, " %08x %08x %08x %08x %8s\n", + rt->rt6i_metric, atomic_read(&rt->u.dst.__refcnt), + rt->u.dst.__use, rt->rt6i_flags, + rt->rt6i_dev ? rt->rt6i_dev->name : ""); return 0; } -static int rt6_proc_info(char *buffer, char **start, off_t offset, int length) +static int ipv6_route_show(struct seq_file *m, void *v) { - struct rt6_proc_arg arg = { - .buffer = buffer, - .offset = offset, - .length = length, - }; - - fib6_clean_all(rt6_info_route, 0, &arg); - - *start = buffer; - if (offset) - *start += offset % RT6_INFO_LEN; - - arg.len -= offset % RT6_INFO_LEN; - - if (arg.len > length) - arg.len = length; - if (arg.len < 0) - arg.len = 0; + fib6_clean_all(rt6_info_route, 0, m); + return 0; +} - return arg.len; +static int ipv6_route_open(struct inode *inode, struct file *file) +{ + return single_open(file, ipv6_route_show, NULL); } +static const struct file_operations ipv6_route_proc_fops = { + .owner = THIS_MODULE, + .open = ipv6_route_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static int rt6_stats_seq_show(struct seq_file *seq, void *v) { seq_printf(seq, "%04x %04x %04x %04x %04x %04x %04x\n", @@ -2489,22 +2464,14 @@ ctl_table ipv6_route_table[] = { void __init ip6_route_init(void) { -#ifdef CONFIG_PROC_FS - struct proc_dir_entry *p; -#endif ip6_dst_ops.kmem_cachep = kmem_cache_create("ip6_dst_cache", sizeof(struct rt6_info), 0, SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL); ip6_dst_blackhole_ops.kmem_cachep = ip6_dst_ops.kmem_cachep; fib6_init(); -#ifdef CONFIG_PROC_FS - p = proc_net_create(&init_net, "ipv6_route", 0, rt6_proc_info); - if (p) - p->owner = THIS_MODULE; - + proc_net_fops_create(&init_net, "ipv6_route", 0, &ipv6_route_proc_fops); proc_net_fops_create(&init_net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops); -#endif #ifdef CONFIG_XFRM xfrm6_init(); #endif diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 06be2a1f2730..3aad861975a0 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -2107,6 +2107,8 @@ void tcp6_proc_exit(void) } #endif +DEFINE_PROTO_INUSE(tcpv6) + struct proto tcpv6_prot = { .name = "TCPv6", .owner = THIS_MODULE, @@ -2141,6 +2143,7 @@ struct proto tcpv6_prot = { .compat_setsockopt = compat_tcp_setsockopt, .compat_getsockopt = compat_tcp_getsockopt, #endif + REF_PROTO_INUSE(tcpv6) }; static struct inet6_protocol tcpv6_protocol = { diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index caebad6ee510..ee1cc3f8599f 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -205,12 +205,11 @@ out: return err; csum_copy_err: + UDP6_INC_STATS_USER(UDP_MIB_INERRORS, is_udplite); skb_kill_datagram(sk, skb, flags); - if (flags & MSG_DONTWAIT) { - UDP6_INC_STATS_USER(UDP_MIB_INERRORS, is_udplite); + if (flags & MSG_DONTWAIT) return -EAGAIN; - } goto try_again; } @@ -971,6 +970,8 @@ void udp6_proc_exit(void) { /* ------------------------------------------------------------------------ */ +DEFINE_PROTO_INUSE(udpv6) + struct proto udpv6_prot = { .name = "UDPv6", .owner = THIS_MODULE, @@ -992,6 +993,7 @@ struct proto udpv6_prot = { .compat_setsockopt = compat_udpv6_setsockopt, .compat_getsockopt = compat_udpv6_getsockopt, #endif + REF_PROTO_INUSE(udpv6) }; static struct inet_protosw udpv6_protosw = { diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c index 766566f7de47..5a0379f71415 100644 --- a/net/ipv6/udplite.c +++ b/net/ipv6/udplite.c @@ -40,6 +40,8 @@ static int udplite_v6_get_port(struct sock *sk, unsigned short snum) return udplite_get_port(sk, snum, ipv6_rcv_saddr_equal); } +DEFINE_PROTO_INUSE(udplitev6) + struct proto udplitev6_prot = { .name = "UDPLITEv6", .owner = THIS_MODULE, @@ -62,6 +64,7 @@ struct proto udplitev6_prot = { .compat_setsockopt = compat_udpv6_setsockopt, .compat_getsockopt = compat_udpv6_getsockopt, #endif + REF_PROTO_INUSE(udplitev6) }; static struct inet_protosw udplite6_protosw = { diff --git a/net/netfilter/Makefile b/net/netfilter/Makefile index 93c58f973831..ad0e36ebea3d 100644 --- a/net/netfilter/Makefile +++ b/net/netfilter/Makefile @@ -40,15 +40,15 @@ obj-$(CONFIG_NETFILTER_XTABLES) += x_tables.o xt_tcpudp.o # targets obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIFY) += xt_CLASSIFY.o obj-$(CONFIG_NETFILTER_XT_TARGET_CONNMARK) += xt_CONNMARK.o +obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o obj-$(CONFIG_NETFILTER_XT_TARGET_MARK) += xt_MARK.o -obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o +obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o obj-$(CONFIG_NETFILTER_XT_TARGET_NOTRACK) += xt_NOTRACK.o -obj-$(CONFIG_NETFILTER_XT_TARGET_TRACE) += xt_TRACE.o obj-$(CONFIG_NETFILTER_XT_TARGET_SECMARK) += xt_SECMARK.o obj-$(CONFIG_NETFILTER_XT_TARGET_TCPMSS) += xt_TCPMSS.o -obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o +obj-$(CONFIG_NETFILTER_XT_TARGET_TRACE) += xt_TRACE.o # matches obj-$(CONFIG_NETFILTER_XT_MATCH_COMMENT) += xt_comment.o @@ -59,22 +59,22 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_CONNTRACK) += xt_conntrack.o obj-$(CONFIG_NETFILTER_XT_MATCH_DCCP) += xt_dccp.o obj-$(CONFIG_NETFILTER_XT_MATCH_DSCP) += xt_dscp.o obj-$(CONFIG_NETFILTER_XT_MATCH_ESP) += xt_esp.o +obj-$(CONFIG_NETFILTER_XT_MATCH_HASHLIMIT) += xt_hashlimit.o obj-$(CONFIG_NETFILTER_XT_MATCH_HELPER) += xt_helper.o obj-$(CONFIG_NETFILTER_XT_MATCH_LENGTH) += xt_length.o obj-$(CONFIG_NETFILTER_XT_MATCH_LIMIT) += xt_limit.o obj-$(CONFIG_NETFILTER_XT_MATCH_MAC) += xt_mac.o obj-$(CONFIG_NETFILTER_XT_MATCH_MARK) += xt_mark.o obj-$(CONFIG_NETFILTER_XT_MATCH_MULTIPORT) += xt_multiport.o -obj-$(CONFIG_NETFILTER_XT_MATCH_POLICY) += xt_policy.o +obj-$(CONFIG_NETFILTER_XT_MATCH_PHYSDEV) += xt_physdev.o obj-$(CONFIG_NETFILTER_XT_MATCH_PKTTYPE) += xt_pkttype.o +obj-$(CONFIG_NETFILTER_XT_MATCH_POLICY) += xt_policy.o obj-$(CONFIG_NETFILTER_XT_MATCH_QUOTA) += xt_quota.o obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o -obj-$(CONFIG_NETFILTER_XT_MATCH_TIME) += xt_time.o obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o -obj-$(CONFIG_NETFILTER_XT_MATCH_PHYSDEV) += xt_physdev.o +obj-$(CONFIG_NETFILTER_XT_MATCH_TIME) += xt_time.o obj-$(CONFIG_NETFILTER_XT_MATCH_U32) += xt_u32.o -obj-$(CONFIG_NETFILTER_XT_MATCH_HASHLIMIT) += xt_hashlimit.o diff --git a/net/netfilter/nf_sockopt.c b/net/netfilter/nf_sockopt.c index aa2831587b82..2dfac3253569 100644 --- a/net/netfilter/nf_sockopt.c +++ b/net/netfilter/nf_sockopt.c @@ -23,14 +23,13 @@ static inline int overlap(int min1, int max1, int min2, int max2) /* Functions to register sockopt ranges (exclusive). */ int nf_register_sockopt(struct nf_sockopt_ops *reg) { - struct list_head *i; + struct nf_sockopt_ops *ops; int ret = 0; if (mutex_lock_interruptible(&nf_sockopt_mutex) != 0) return -EINTR; - list_for_each(i, &nf_sockopts) { - struct nf_sockopt_ops *ops = (struct nf_sockopt_ops *)i; + list_for_each_entry(ops, &nf_sockopts, list) { if (ops->pf == reg->pf && (overlap(ops->set_optmin, ops->set_optmax, reg->set_optmin, reg->set_optmax) @@ -65,7 +64,6 @@ EXPORT_SYMBOL(nf_unregister_sockopt); static int nf_sockopt(struct sock *sk, int pf, int val, char __user *opt, int *len, int get) { - struct list_head *i; struct nf_sockopt_ops *ops; int ret; @@ -75,8 +73,7 @@ static int nf_sockopt(struct sock *sk, int pf, int val, if (mutex_lock_interruptible(&nf_sockopt_mutex) != 0) return -EINTR; - list_for_each(i, &nf_sockopts) { - ops = (struct nf_sockopt_ops *)i; + list_for_each_entry(ops, &nf_sockopts, list) { if (ops->pf == pf) { if (!try_module_get(ops->owner)) goto out_nosup; @@ -124,7 +121,6 @@ EXPORT_SYMBOL(nf_getsockopt); static int compat_nf_sockopt(struct sock *sk, int pf, int val, char __user *opt, int *len, int get) { - struct list_head *i; struct nf_sockopt_ops *ops; int ret; @@ -135,8 +131,7 @@ static int compat_nf_sockopt(struct sock *sk, int pf, int val, if (mutex_lock_interruptible(&nf_sockopt_mutex) != 0) return -EINTR; - list_for_each(i, &nf_sockopts) { - ops = (struct nf_sockopt_ops *)i; + list_for_each_entry(ops, &nf_sockopts, list) { if (ops->pf == pf) { if (!try_module_get(ops->owner)) goto out_nosup; diff --git a/net/netfilter/xt_connlimit.c b/net/netfilter/xt_connlimit.c index 06cff1d13690..d7becf08a93a 100644 --- a/net/netfilter/xt_connlimit.c +++ b/net/netfilter/xt_connlimit.c @@ -4,7 +4,8 @@ * (c) 2000 Gerd Knorr <kraxel@bytesex.org> * Nov 2002: Martin Bene <martin.bene@icomedias.com>: * only ignore TIME_WAIT or gone connections - * Copyright © Jan Engelhardt <jengelh@gmx.de>, 2007 + * (C) CC Computer Consultants GmbH, 2007 + * Contact: <jengelh@computergmbh.de> * * based on ... * @@ -306,7 +307,7 @@ static void __exit xt_connlimit_exit(void) module_init(xt_connlimit_init); module_exit(xt_connlimit_exit); -MODULE_AUTHOR("Jan Engelhardt <jengelh@gmx.de>"); +MODULE_AUTHOR("Jan Engelhardt <jengelh@computergmbh.de>"); MODULE_DESCRIPTION("netfilter xt_connlimit match module"); MODULE_LICENSE("GPL"); MODULE_ALIAS("ipt_connlimit"); diff --git a/net/netfilter/xt_time.c b/net/netfilter/xt_time.c index ef48bbd93573..ff44f86c24ce 100644 --- a/net/netfilter/xt_time.c +++ b/net/netfilter/xt_time.c @@ -1,6 +1,7 @@ /* * xt_time - * Copyright © Jan Engelhardt <jengelh@computergmbh.de>, 2007 + * Copyright © CC Computer Consultants GmbH, 2007 + * Contact: <jengelh@computergmbh.de> * * based on ipt_time by Fabrice MARIE <fabrice@netfilter.org> * This is a module which is used for time matching diff --git a/net/netfilter/xt_u32.c b/net/netfilter/xt_u32.c index bec427915b30..af75b8c3f20b 100644 --- a/net/netfilter/xt_u32.c +++ b/net/netfilter/xt_u32.c @@ -2,7 +2,8 @@ * xt_u32 - kernel module to match u32 packet content * * Original author: Don Cohen <don@isis.cs3-inc.com> - * © Jan Engelhardt <jengelh@gmx.de>, 2007 + * (C) CC Computer Consultants GmbH, 2007 + * Contact: <jengelh@computergmbh.de> */ #include <linux/module.h> @@ -129,7 +130,7 @@ static void __exit xt_u32_exit(void) module_init(xt_u32_init); module_exit(xt_u32_exit); -MODULE_AUTHOR("Jan Engelhardt <jengelh@gmx.de>"); +MODULE_AUTHOR("Jan Engelhardt <jengelh@computergmbh.de>"); MODULE_DESCRIPTION("netfilter u32 match module"); MODULE_LICENSE("GPL"); MODULE_ALIAS("ipt_u32"); diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 260171255576..415c97236f63 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -752,7 +752,7 @@ struct sock *netlink_getsockbyfilp(struct file *filp) * 1: repeat lookup - reference dropped while waiting for socket memory. */ int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock, - long timeo, struct sock *ssk) + long *timeo, struct sock *ssk) { struct netlink_sock *nlk; @@ -761,7 +761,7 @@ int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock, if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf || test_bit(0, &nlk->state)) { DECLARE_WAITQUEUE(wait, current); - if (!timeo) { + if (!*timeo) { if (!ssk || netlink_is_kernel(ssk)) netlink_overrun(sk); sock_put(sk); @@ -775,7 +775,7 @@ int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock, if ((atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf || test_bit(0, &nlk->state)) && !sock_flag(sk, SOCK_DEAD)) - timeo = schedule_timeout(timeo); + *timeo = schedule_timeout(*timeo); __set_current_state(TASK_RUNNING); remove_wait_queue(&nlk->wait, &wait); @@ -783,7 +783,7 @@ int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock, if (signal_pending(current)) { kfree_skb(skb); - return sock_intr_errno(timeo); + return sock_intr_errno(*timeo); } return 1; } @@ -877,7 +877,7 @@ retry: if (netlink_is_kernel(sk)) return netlink_unicast_kernel(sk, skb); - err = netlink_attachskb(sk, skb, nonblock, timeo, ssk); + err = netlink_attachskb(sk, skb, nonblock, &timeo, ssk); if (err == 1) goto retry; if (err) diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c index 9e98c6e567dd..53171029439f 100644 --- a/net/sched/cls_u32.c +++ b/net/sched/cls_u32.c @@ -91,7 +91,7 @@ static struct tc_u_common *u32_list; static __inline__ unsigned u32_hash_fold(u32 key, struct tc_u32_sel *sel, u8 fshift) { - unsigned h = (key & sel->hmask)>>fshift; + unsigned h = ntohl(key & sel->hmask)>>fshift; return h; } @@ -615,7 +615,7 @@ static int u32_change(struct tcf_proto *tp, unsigned long base, u32 handle, n->handle = handle; { u8 i = 0; - u32 mask = s->hmask; + u32 mask = ntohl(s->hmask); if (mask) { while (!(mask & 1)) { i++; diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c index 421281d9dd1d..c0ed06d4a504 100644 --- a/net/sched/sch_teql.c +++ b/net/sched/sch_teql.c @@ -252,6 +252,9 @@ __teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, struct net_device * static inline int teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, struct net_device *dev) { + if (dev->qdisc == &noop_qdisc) + return -ENODEV; + if (dev->header_ops == NULL || skb->dst == NULL || skb->dst->neighbour == NULL) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index bd6f42a15a4b..a7ecf3159e53 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -6455,6 +6455,8 @@ static void sctp_sock_migrate(struct sock *oldsk, struct sock *newsk, } +DEFINE_PROTO_INUSE(sctp) + /* This proto struct describes the ULP interface for SCTP. */ struct proto sctp_prot = { .name = "SCTP", @@ -6483,9 +6485,12 @@ struct proto sctp_prot = { .memory_pressure = &sctp_memory_pressure, .enter_memory_pressure = sctp_enter_memory_pressure, .memory_allocated = &sctp_memory_allocated, + REF_PROTO_INUSE(sctp) }; #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) +DEFINE_PROTO_INUSE(sctpv6) + struct proto sctpv6_prot = { .name = "SCTPv6", .owner = THIS_MODULE, @@ -6513,5 +6518,6 @@ struct proto sctpv6_prot = { .memory_pressure = &sctp_memory_pressure, .enter_memory_pressure = sctp_enter_memory_pressure, .memory_allocated = &sctp_memory_allocated, + REF_PROTO_INUSE(sctpv6) }; #endif /* defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) */ diff --git a/security/selinux/ss/avtab.c b/security/selinux/ss/avtab.c index 7551af1f7899..9e70a160d7da 100644 --- a/security/selinux/ss/avtab.c +++ b/security/selinux/ss/avtab.c @@ -325,7 +325,7 @@ static uint16_t spec_order[] = { AVTAB_MEMBER }; -int avtab_read_item(void *fp, u32 vers, struct avtab *a, +int avtab_read_item(struct avtab *a, void *fp, struct policydb *pol, int (*insertf)(struct avtab *a, struct avtab_key *k, struct avtab_datum *d, void *p), void *p) @@ -333,10 +333,11 @@ int avtab_read_item(void *fp, u32 vers, struct avtab *a, __le16 buf16[4]; u16 enabled; __le32 buf32[7]; - u32 items, items2, val; + u32 items, items2, val, vers = pol->policyvers; struct avtab_key key; struct avtab_datum datum; int i, rc; + unsigned set; memset(&key, 0, sizeof(struct avtab_key)); memset(&datum, 0, sizeof(struct avtab_datum)); @@ -420,12 +421,35 @@ int avtab_read_item(void *fp, u32 vers, struct avtab *a, key.target_class = le16_to_cpu(buf16[items++]); key.specified = le16_to_cpu(buf16[items++]); + if (!policydb_type_isvalid(pol, key.source_type) || + !policydb_type_isvalid(pol, key.target_type) || + !policydb_class_isvalid(pol, key.target_class)) { + printk(KERN_WARNING "security: avtab: invalid type or class\n"); + return -1; + } + + set = 0; + for (i = 0; i < ARRAY_SIZE(spec_order); i++) { + if (key.specified & spec_order[i]) + set++; + } + if (!set || set > 1) { + printk(KERN_WARNING + "security: avtab: more than one specifier\n"); + return -1; + } + rc = next_entry(buf32, fp, sizeof(u32)); if (rc < 0) { printk("security: avtab: truncated entry\n"); return -1; } datum.data = le32_to_cpu(*buf32); + if ((key.specified & AVTAB_TYPE) && + !policydb_type_isvalid(pol, datum.data)) { + printk(KERN_WARNING "security: avtab: invalid type\n"); + return -1; + } return insertf(a, &key, &datum, p); } @@ -435,7 +459,7 @@ static int avtab_insertf(struct avtab *a, struct avtab_key *k, return avtab_insert(a, k, d); } -int avtab_read(struct avtab *a, void *fp, u32 vers) +int avtab_read(struct avtab *a, void *fp, struct policydb *pol) { int rc; __le32 buf[1]; @@ -459,7 +483,7 @@ int avtab_read(struct avtab *a, void *fp, u32 vers) goto bad; for (i = 0; i < nel; i++) { - rc = avtab_read_item(fp,vers, a, avtab_insertf, NULL); + rc = avtab_read_item(a, fp, pol, avtab_insertf, NULL); if (rc) { if (rc == -ENOMEM) printk(KERN_ERR "security: avtab: out of memory\n"); diff --git a/security/selinux/ss/avtab.h b/security/selinux/ss/avtab.h index d8edf8ca56d1..8da6a8428086 100644 --- a/security/selinux/ss/avtab.h +++ b/security/selinux/ss/avtab.h @@ -64,12 +64,13 @@ struct avtab_datum *avtab_search(struct avtab *h, struct avtab_key *k); void avtab_destroy(struct avtab *h); void avtab_hash_eval(struct avtab *h, char *tag); -int avtab_read_item(void *fp, uint32_t vers, struct avtab *a, +struct policydb; +int avtab_read_item(struct avtab *a, void *fp, struct policydb *pol, int (*insert)(struct avtab *a, struct avtab_key *k, struct avtab_datum *d, void *p), void *p); -int avtab_read(struct avtab *a, void *fp, u32 vers); +int avtab_read(struct avtab *a, void *fp, struct policydb *pol); struct avtab_node *avtab_insert_nonunique(struct avtab *h, struct avtab_key *key, struct avtab_datum *datum); diff --git a/security/selinux/ss/conditional.c b/security/selinux/ss/conditional.c index 45b93a827c80..50ad85d4b77c 100644 --- a/security/selinux/ss/conditional.c +++ b/security/selinux/ss/conditional.c @@ -362,7 +362,8 @@ static int cond_read_av_list(struct policydb *p, void *fp, struct cond_av_list * data.head = NULL; data.tail = NULL; for (i = 0; i < len; i++) { - rc = avtab_read_item(fp, p->policyvers, &p->te_cond_avtab, cond_insertf, &data); + rc = avtab_read_item(&p->te_cond_avtab, fp, p, cond_insertf, + &data); if (rc) return rc; diff --git a/security/selinux/ss/ebitmap.c b/security/selinux/ss/ebitmap.c index c1a6b22d48d9..920b5e36a1af 100644 --- a/security/selinux/ss/ebitmap.c +++ b/security/selinux/ss/ebitmap.c @@ -129,8 +129,8 @@ int ebitmap_netlbl_export(struct ebitmap *ebmap, cmap_sft = delta % NETLBL_CATMAP_MAPSIZE; c_iter->bitmap[cmap_idx] |= e_iter->maps[cmap_idx] << cmap_sft; - e_iter = e_iter->next; } + e_iter = e_iter->next; } return 0; diff --git a/security/selinux/ss/mls.c b/security/selinux/ss/mls.c index 9a11deaaa9e7..fb5d70a6628d 100644 --- a/security/selinux/ss/mls.c +++ b/security/selinux/ss/mls.c @@ -157,49 +157,55 @@ void mls_sid_to_context(struct context *context, return; } +int mls_level_isvalid(struct policydb *p, struct mls_level *l) +{ + struct level_datum *levdatum; + struct ebitmap_node *node; + int i; + + if (!l->sens || l->sens > p->p_levels.nprim) + return 0; + levdatum = hashtab_search(p->p_levels.table, + p->p_sens_val_to_name[l->sens - 1]); + if (!levdatum) + return 0; + + ebitmap_for_each_positive_bit(&l->cat, node, i) { + if (i > p->p_cats.nprim) + return 0; + if (!ebitmap_get_bit(&levdatum->level->cat, i)) { + /* + * Category may not be associated with + * sensitivity. + */ + return 0; + } + } + + return 1; +} + +int mls_range_isvalid(struct policydb *p, struct mls_range *r) +{ + return (mls_level_isvalid(p, &r->level[0]) && + mls_level_isvalid(p, &r->level[1]) && + mls_level_dom(&r->level[1], &r->level[0])); +} + /* * Return 1 if the MLS fields in the security context * structure `c' are valid. Return 0 otherwise. */ int mls_context_isvalid(struct policydb *p, struct context *c) { - struct level_datum *levdatum; struct user_datum *usrdatum; - struct ebitmap_node *node; - int i, l; if (!selinux_mls_enabled) return 1; - /* - * MLS range validity checks: high must dominate low, low level must - * be valid (category set <-> sensitivity check), and high level must - * be valid (category set <-> sensitivity check) - */ - if (!mls_level_dom(&c->range.level[1], &c->range.level[0])) - /* High does not dominate low. */ + if (!mls_range_isvalid(p, &c->range)) return 0; - for (l = 0; l < 2; l++) { - if (!c->range.level[l].sens || c->range.level[l].sens > p->p_levels.nprim) - return 0; - levdatum = hashtab_search(p->p_levels.table, - p->p_sens_val_to_name[c->range.level[l].sens - 1]); - if (!levdatum) - return 0; - - ebitmap_for_each_positive_bit(&c->range.level[l].cat, node, i) { - if (i > p->p_cats.nprim) - return 0; - if (!ebitmap_get_bit(&levdatum->level->cat, i)) - /* - * Category may not be associated with - * sensitivity in low level. - */ - return 0; - } - } - if (c->role == OBJECT_R_VAL) return 1; diff --git a/security/selinux/ss/mls.h b/security/selinux/ss/mls.h index 096d1b4ef7fb..ab53663d9f5f 100644 --- a/security/selinux/ss/mls.h +++ b/security/selinux/ss/mls.h @@ -27,6 +27,8 @@ int mls_compute_context_len(struct context *context); void mls_sid_to_context(struct context *context, char **scontext); int mls_context_isvalid(struct policydb *p, struct context *c); +int mls_range_isvalid(struct policydb *p, struct mls_range *r); +int mls_level_isvalid(struct policydb *p, struct mls_level *l); int mls_context_to_sid(char oldc, char **scontext, diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c index 539828b229b2..b582aae3c62c 100644 --- a/security/selinux/ss/policydb.c +++ b/security/selinux/ss/policydb.c @@ -713,6 +713,27 @@ out: return rc; } +int policydb_class_isvalid(struct policydb *p, unsigned int class) +{ + if (!class || class > p->p_classes.nprim) + return 0; + return 1; +} + +int policydb_role_isvalid(struct policydb *p, unsigned int role) +{ + if (!role || role > p->p_roles.nprim) + return 0; + return 1; +} + +int policydb_type_isvalid(struct policydb *p, unsigned int type) +{ + if (!type || type > p->p_types.nprim) + return 0; + return 1; +} + /* * Return 1 if the fields in the security context * structure `c' are valid. Return 0 otherwise. @@ -1260,6 +1281,7 @@ static int mls_read_level(struct mls_level *lp, void *fp) "categories\n"); goto bad; } + return 0; bad: @@ -1563,7 +1585,7 @@ int policydb_read(struct policydb *p, void *fp) p->symtab[i].nprim = nprim; } - rc = avtab_read(&p->te_avtab, fp, p->policyvers); + rc = avtab_read(&p->te_avtab, fp, p); if (rc) goto bad; @@ -1595,6 +1617,12 @@ int policydb_read(struct policydb *p, void *fp) tr->role = le32_to_cpu(buf[0]); tr->type = le32_to_cpu(buf[1]); tr->new_role = le32_to_cpu(buf[2]); + if (!policydb_role_isvalid(p, tr->role) || + !policydb_type_isvalid(p, tr->type) || + !policydb_role_isvalid(p, tr->new_role)) { + rc = -EINVAL; + goto bad; + } ltr = tr; } @@ -1619,6 +1647,11 @@ int policydb_read(struct policydb *p, void *fp) goto bad; ra->role = le32_to_cpu(buf[0]); ra->new_role = le32_to_cpu(buf[1]); + if (!policydb_role_isvalid(p, ra->role) || + !policydb_role_isvalid(p, ra->new_role)) { + rc = -EINVAL; + goto bad; + } lra = ra; } @@ -1872,9 +1905,19 @@ int policydb_read(struct policydb *p, void *fp) rt->target_class = le32_to_cpu(buf[0]); } else rt->target_class = SECCLASS_PROCESS; + if (!policydb_type_isvalid(p, rt->source_type) || + !policydb_type_isvalid(p, rt->target_type) || + !policydb_class_isvalid(p, rt->target_class)) { + rc = -EINVAL; + goto bad; + } rc = mls_read_range_helper(&rt->target_range, fp); if (rc) goto bad; + if (!mls_range_isvalid(p, &rt->target_range)) { + printk(KERN_WARNING "security: rangetrans: invalid range\n"); + goto bad; + } lrt = rt; } } diff --git a/security/selinux/ss/policydb.h b/security/selinux/ss/policydb.h index 844d310f4f1b..ed6fc687c66f 100644 --- a/security/selinux/ss/policydb.h +++ b/security/selinux/ss/policydb.h @@ -251,6 +251,9 @@ struct policydb { extern void policydb_destroy(struct policydb *p); extern int policydb_load_isids(struct policydb *p, struct sidtab *s); extern int policydb_context_isvalid(struct policydb *p, struct context *c); +extern int policydb_class_isvalid(struct policydb *p, unsigned int class); +extern int policydb_type_isvalid(struct policydb *p, unsigned int type); +extern int policydb_role_isvalid(struct policydb *p, unsigned int role); extern int policydb_read(struct policydb *p, void *fp); #define PERM_SYMTAB_SIZE 32 diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c index 36a191e7004e..e07603969033 100644 --- a/security/selinux/xfrm.c +++ b/security/selinux/xfrm.c @@ -211,26 +211,27 @@ static int selinux_xfrm_sec_ctx_alloc(struct xfrm_sec_ctx **ctxp, if (uctx->ctx_doi != XFRM_SC_ALG_SELINUX) return -EINVAL; - if (uctx->ctx_len >= PAGE_SIZE) + str_len = uctx->ctx_len; + if (str_len >= PAGE_SIZE) return -ENOMEM; *ctxp = ctx = kmalloc(sizeof(*ctx) + - uctx->ctx_len + 1, + str_len + 1, GFP_KERNEL); if (!ctx) return -ENOMEM; ctx->ctx_doi = uctx->ctx_doi; - ctx->ctx_len = uctx->ctx_len; + ctx->ctx_len = str_len; ctx->ctx_alg = uctx->ctx_alg; memcpy(ctx->ctx_str, uctx+1, - ctx->ctx_len); - ctx->ctx_str[ctx->ctx_len] = 0; + str_len); + ctx->ctx_str[str_len] = 0; rc = security_context_to_sid(ctx->ctx_str, - ctx->ctx_len, + str_len, &ctx->ctx_sid); if (rc) |
