summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm8510.c
diff options
context:
space:
mode:
authorMark Brown <broonie@opensource.wolfsonmicro.com>2009-07-10 23:28:16 +0100
committerMark Brown <broonie@opensource.wolfsonmicro.com>2009-08-03 16:59:16 +0100
commit27ded041f03026e8c6be9efc626e11ddfb4620c1 (patch)
treef8b156b2c31a97805c8341fd215648e989e12430 /sound/soc/codecs/wm8510.c
parent8d50e447d19fec64adebeef55f2b60d695435412 (diff)
downloadblackbird-op-linux-27ded041f03026e8c6be9efc626e11ddfb4620c1.tar.gz
blackbird-op-linux-27ded041f03026e8c6be9efc626e11ddfb4620c1.zip
ASoC: Factor out 7 bit register 9 bit data SPI write
This converts all the Wolfson drivers using this format (the only devices that do) except WM8753 to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'sound/soc/codecs/wm8510.c')
-rw-r--r--sound/soc/codecs/wm8510.c25
1 files changed, 0 insertions, 25 deletions
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 4ca724ff4c6e..bcd6a40171dc 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -737,30 +737,6 @@ static struct spi_driver wm8510_spi_driver = {
.probe = wm8510_spi_probe,
.remove = __devexit_p(wm8510_spi_remove),
};
-
-static int wm8510_spi_write(struct spi_device *spi, const char *data, int len)
-{
- struct spi_transfer t;
- struct spi_message m;
- u8 msg[2];
-
- if (len <= 0)
- return 0;
-
- msg[0] = data[0];
- msg[1] = data[1];
-
- spi_message_init(&m);
- memset(&t, 0, (sizeof t));
-
- t.tx_buf = &msg[0];
- t.len = len;
-
- spi_message_add_tail(&t, &m);
- spi_sync(spi, &m);
-
- return len;
-}
#endif /* CONFIG_SPI_MASTER */
static int wm8510_probe(struct platform_device *pdev)
@@ -790,7 +766,6 @@ static int wm8510_probe(struct platform_device *pdev)
#endif
#if defined(CONFIG_SPI_MASTER)
if (setup->spi) {
- codec->hw_write = (hw_write_t)wm8510_spi_write;
ret = spi_register_driver(&wm8510_spi_driver);
if (ret != 0)
printk(KERN_ERR "can't add spi driver");
OpenPOWER on IntegriCloud