summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/da7210.c
diff options
context:
space:
mode:
authorAshish Chavan <ashish.chavan@kpitcummins.com>2012-03-29 19:06:29 +0530
committerMark Brown <broonie@opensource.wolfsonmicro.com>2012-04-01 11:28:31 +0100
commitaa0e25caafb7950e839db930649a65e8b7f70e1a (patch)
treea9467938858bc0f0883dc8a44eb1f0c7756c1f18 /sound/soc/codecs/da7210.c
parenteb794077b8fe343a6fdc0aa94ad1fc5388ddded5 (diff)
downloadblackbird-op-linux-aa0e25caafb7950e839db930649a65e8b7f70e1a.tar.gz
blackbird-op-linux-aa0e25caafb7950e839db930649a65e8b7f70e1a.zip
ASoC: da7210: Add support for spi regmap
This patch adds support for spi regmap feature to existing da7210 driver. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'sound/soc/codecs/da7210.c')
-rw-r--r--sound/soc/codecs/da7210.c154
1 files changed, 133 insertions, 21 deletions
diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c
index 7843711729bc..8e45aa9cb7b7 100644
--- a/sound/soc/codecs/da7210.c
+++ b/sound/soc/codecs/da7210.c
@@ -17,6 +17,7 @@
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/spi/spi.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -27,6 +28,7 @@
#include <sound/tlv.h>
/* DA7210 register space */
+#define DA7210_PAGE_CONTROL 0x00
#define DA7210_CONTROL 0x01
#define DA7210_STATUS 0x02
#define DA7210_STARTUP1 0x03
@@ -631,6 +633,7 @@ struct da7210_priv {
};
static struct reg_default da7210_reg_defaults[] = {
+ { 0x00, 0x00 },
{ 0x01, 0x11 },
{ 0x03, 0x00 },
{ 0x04, 0x00 },
@@ -928,13 +931,6 @@ static int da7210_probe(struct snd_soc_codec *codec)
*/
/*
- * make sure that DA7210 use bypass mode before start up
- */
- snd_soc_write(codec, DA7210_STARTUP1, 0);
- snd_soc_write(codec, DA7210_PLL_DIV3,
- DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP);
-
- /*
* ADC settings
*/
@@ -1025,16 +1021,6 @@ static int da7210_probe(struct snd_soc_codec *codec)
DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP);
snd_soc_update_bits(codec, DA7210_PLL, DA7210_PLL_EN, DA7210_PLL_EN);
- /* As suggested by Dialog */
- /* unlock */
- regmap_write(da7210->regmap, DA7210_A_HID_UNLOCK, 0x8B);
- regmap_write(da7210->regmap, DA7210_A_TEST_UNLOCK, 0xB4);
- regmap_write(da7210->regmap, DA7210_A_PLL1, 0x01);
- regmap_write(da7210->regmap, DA7210_A_CP_MODE, 0x7C);
- /* re-lock */
- regmap_write(da7210->regmap, DA7210_A_HID_UNLOCK, 0x00);
- regmap_write(da7210->regmap, DA7210_A_TEST_UNLOCK, 0x00);
-
/* Activate all enabled subsystem */
snd_soc_write(codec, DA7210_STARTUP1, DA7210_SC_MST_EN);
@@ -1055,7 +1041,26 @@ static struct snd_soc_codec_driver soc_codec_dev_da7210 = {
.num_dapm_routes = ARRAY_SIZE(da7210_audio_map),
};
-static struct regmap_config da7210_regmap = {
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+
+static struct reg_default da7210_regmap_i2c_patch[] = {
+
+ /* System controller master disable */
+ { DA7210_STARTUP1, 0x00 },
+ /* make sure that DA7210 use bypass mode before start up */
+ { DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP },
+
+ /* to unlock */
+ { DA7210_A_HID_UNLOCK, 0x8B},
+ { DA7210_A_TEST_UNLOCK, 0xB4},
+ { DA7210_A_PLL1, 0x01},
+ { DA7210_A_CP_MODE, 0x7C},
+ /* to re-lock */
+ { DA7210_A_HID_UNLOCK, 0x00},
+ { DA7210_A_TEST_UNLOCK, 0x00},
+};
+
+static const struct regmap_config da7210_regmap_config_i2c = {
.reg_bits = 8,
.val_bits = 8,
@@ -1066,7 +1071,6 @@ static struct regmap_config da7210_regmap = {
.cache_type = REGCACHE_RBTREE,
};
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
static int __devinit da7210_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -1080,13 +1084,18 @@ static int __devinit da7210_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, da7210);
- da7210->regmap = regmap_init_i2c(i2c, &da7210_regmap);
+ da7210->regmap = regmap_init_i2c(i2c, &da7210_regmap_config_i2c);
if (IS_ERR(da7210->regmap)) {
ret = PTR_ERR(da7210->regmap);
dev_err(&i2c->dev, "regmap_init() failed: %d\n", ret);
return ret;
}
+ ret = regmap_register_patch(da7210->regmap, da7210_regmap_i2c_patch,
+ ARRAY_SIZE(da7210_regmap_i2c_patch));
+ if (ret != 0)
+ dev_warn(&i2c->dev, "Failed to apply regmap patch: %d\n", ret);
+
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_da7210, &da7210_dai, 1);
if (ret < 0) {
@@ -1119,7 +1128,7 @@ MODULE_DEVICE_TABLE(i2c, da7210_i2c_id);
/* I2C codec control layer */
static struct i2c_driver da7210_i2c_driver = {
.driver = {
- .name = "da7210-codec",
+ .name = "da7210",
.owner = THIS_MODULE,
},
.probe = da7210_i2c_probe,
@@ -1128,12 +1137,112 @@ static struct i2c_driver da7210_i2c_driver = {
};
#endif
+#if defined(CONFIG_SPI_MASTER)
+
+static struct reg_default da7210_regmap_spi_patch[] = {
+ /* Dummy read to give two pulses over nCS for SPI */
+ { DA7210_AUX2, 0x00 },
+ { DA7210_AUX2, 0x00 },
+
+ /* System controller master disable */
+ { DA7210_STARTUP1, 0x00 },
+ /* make sure that DA7210 use bypass mode before start up */
+ { DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP },
+
+ /* to set PAGE1 of SPI register space */
+ { DA7210_PAGE_CONTROL, 0x80 },
+ /* to unlock */
+ { DA7210_A_HID_UNLOCK, 0x8B},
+ { DA7210_A_TEST_UNLOCK, 0xB4},
+ { DA7210_A_PLL1, 0x01},
+ { DA7210_A_CP_MODE, 0x7C},
+ /* to re-lock */
+ { DA7210_A_HID_UNLOCK, 0x00},
+ { DA7210_A_TEST_UNLOCK, 0x00},
+ /* to set back PAGE0 of SPI register space */
+ { DA7210_PAGE_CONTROL, 0x00 },
+};
+
+static const struct regmap_config da7210_regmap_config_spi = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .read_flag_mask = 0x01,
+ .write_flag_mask = 0x00,
+
+ .reg_defaults = da7210_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(da7210_reg_defaults),
+ .volatile_reg = da7210_volatile_register,
+ .readable_reg = da7210_readable_register,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int __devinit da7210_spi_probe(struct spi_device *spi)
+{
+ struct da7210_priv *da7210;
+ int ret;
+
+ da7210 = devm_kzalloc(&spi->dev, sizeof(struct da7210_priv),
+ GFP_KERNEL);
+ if (!da7210)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, da7210);
+ da7210->regmap = devm_regmap_init_spi(spi, &da7210_regmap_config_spi);
+ if (IS_ERR(da7210->regmap)) {
+ ret = PTR_ERR(da7210->regmap);
+ dev_err(&spi->dev, "Failed to register regmap: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_register_patch(da7210->regmap, da7210_regmap_spi_patch,
+ ARRAY_SIZE(da7210_regmap_spi_patch));
+ if (ret != 0)
+ dev_warn(&spi->dev, "Failed to apply regmap patch: %d\n", ret);
+
+ ret = snd_soc_register_codec(&spi->dev,
+ &soc_codec_dev_da7210, &da7210_dai, 1);
+ if (ret < 0)
+ goto err_regmap;
+
+ return ret;
+
+err_regmap:
+ regmap_exit(da7210->regmap);
+
+ return ret;
+}
+
+static int __devexit da7210_spi_remove(struct spi_device *spi)
+{
+ struct da7210_priv *da7210 = spi_get_drvdata(spi);
+ snd_soc_unregister_codec(&spi->dev);
+ regmap_exit(da7210->regmap);
+ return 0;
+}
+
+static struct spi_driver da7210_spi_driver = {
+ .driver = {
+ .name = "da7210",
+ .owner = THIS_MODULE,
+ },
+ .probe = da7210_spi_probe,
+ .remove = __devexit_p(da7210_spi_remove)
+};
+#endif
+
static int __init da7210_modinit(void)
{
int ret = 0;
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
ret = i2c_add_driver(&da7210_i2c_driver);
#endif
+#if defined(CONFIG_SPI_MASTER)
+ ret = spi_register_driver(&da7210_spi_driver);
+ if (ret) {
+ printk(KERN_ERR "Failed to register da7210 SPI driver: %d\n",
+ ret);
+ }
+#endif
return ret;
}
module_init(da7210_modinit);
@@ -1143,6 +1252,9 @@ static void __exit da7210_exit(void)
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_del_driver(&da7210_i2c_driver);
#endif
+#if defined(CONFIG_SPI_MASTER)
+ spi_unregister_driver(&da7210_spi_driver);
+#endif
}
module_exit(da7210_exit);
OpenPOWER on IntegriCloud