ALSA: ymfpci: Use standard printk helpers

Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 15 insertions, 11 deletions

diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
index c7e98ff4f80f..81c916a5eb96 100644
--- a/sound/pci/ymfpci/ymfpci_main.c
+++ b/sound/pci/ymfpci/ymfpci_main.c
@@ -86,7 +86,9 @@ static int snd_ymfpci_codec_ready(struct snd_ymfpci *chip, int secondary)
 			return 0;
 		schedule_timeout_uninterruptible(1);
 	} while (time_before(jiffies, end_time));
-	snd_printk(KERN_ERR "codec_ready: codec %i is not ready [0x%x]\n", secondary, snd_ymfpci_readw(chip, reg));
+	dev_err(chip->card->dev,
+		"codec_ready: codec %i is not ready [0x%x]\n",
+		secondary, snd_ymfpci_readw(chip, reg));
 	return -EBUSY;
 }
 
@@ -319,7 +321,7 @@ static void snd_ymfpci_pcm_interrupt(struct snd_ymfpci *chip, struct snd_ymfpci_
 		ypcm->last_pos = pos;
 		if (ypcm->period_pos >= ypcm->period_size) {
 			/*
-			printk(KERN_DEBUG
+			dev_dbg(chip->card->dev,
 			       "done - active_bank = 0x%x, start = 0x%x\n",
 			       chip->active_bank,
 			       voice->bank[chip->active_bank].start);
@@ -372,7 +374,7 @@ static void snd_ymfpci_pcm_capture_interrupt(struct snd_pcm_substream *substream
 		if (ypcm->period_pos >= ypcm->period_size) {
 			ypcm->period_pos %= ypcm->period_size;
 			/*
-			printk(KERN_DEBUG
+			dev_dbg(chip->card->dev,
 			       "done - active_bank = 0x%x, start = 0x%x\n",
 			       chip->active_bank,
 			       voice->bank[chip->active_bank].start);
@@ -2067,7 +2069,8 @@ static int snd_ymfpci_request_firmware(struct snd_ymfpci *chip)
 			       &chip->pci->dev);
 	if (err >= 0) {
 		if (chip->dsp_microcode->size != YDSXG_DSPLENGTH) {
-			snd_printk(KERN_ERR "DSP microcode has wrong size\n");
+			dev_err(chip->card->dev,
+				"DSP microcode has wrong size\n");
 			err = -EINVAL;
 		}
 	}
@@ -2082,8 +2085,8 @@ static int snd_ymfpci_request_firmware(struct snd_ymfpci *chip)
 			       &chip->pci->dev);
 	if (err >= 0) {
 		if (chip->controller_microcode->size != YDSXG_CTRLLENGTH) {
-			snd_printk(KERN_ERR "controller microcode"
-				   " has wrong size\n");
+			dev_err(chip->card->dev,
+				"controller microcode has wrong size\n");
 			err = -EINVAL;
 		}
 	}
@@ -2360,8 +2363,7 @@ static int snd_ymfpci_resume(struct device *dev)
 	pci_set_power_state(pci, PCI_D0);
 	pci_restore_state(pci);
 	if (pci_enable_device(pci) < 0) {
-		printk(KERN_ERR "ymfpci: pci_enable_device failed, "
-		       "disabling device\n");
+		dev_err(dev, "pci_enable_device failed, disabling device\n");
 		snd_card_disconnect(card);
 		return -EIO;
 	}
@@ -2433,13 +2435,15 @@ int snd_ymfpci_create(struct snd_card *card,
 	chip->src441_used = -1;
 
 	if ((chip->res_reg_area = request_mem_region(chip->reg_area_phys, 0x8000, "YMFPCI")) == NULL) {
-		snd_printk(KERN_ERR "unable to grab memory region 0x%lx-0x%lx\n", chip->reg_area_phys, chip->reg_area_phys + 0x8000 - 1);
+		dev_err(chip->card->dev,
+			"unable to grab memory region 0x%lx-0x%lx\n",
+			chip->reg_area_phys, chip->reg_area_phys + 0x8000 - 1);
 		snd_ymfpci_free(chip);
 		return -EBUSY;
 	}
 	if (request_irq(pci->irq, snd_ymfpci_interrupt, IRQF_SHARED,
 			KBUILD_MODNAME, chip)) {
-		snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
+		dev_err(chip->card->dev, "unable to grab IRQ %d\n", pci->irq);
 		snd_ymfpci_free(chip);
 		return -EBUSY;
 	}
@@ -2453,7 +2457,7 @@ int snd_ymfpci_create(struct snd_card *card,
 
 	err = snd_ymfpci_request_firmware(chip);
 	if (err < 0) {
-		snd_printk(KERN_ERR "firmware request failed: %d\n", err);
+		dev_err(chip->card->dev, "firmware request failed: %d\n", err);
 		snd_ymfpci_free(chip);
 		return err;
 	}