ALSA: emu10k1: Use standard printk helpers

Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 45 insertions, 28 deletions

diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index 75504da63613..229269788023 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -217,7 +217,7 @@ static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume)
 	}
 	if (emu->card_capabilities->ca0108_chip) { /* audigy2 Value */
 		/* Hacks for Alice3 to work independent of haP16V driver */
-		snd_printk(KERN_INFO "Audigy2 value: Special config.\n");
+		dev_info(emu->card->dev, "Audigy2 value: Special config.\n");
 		/* Setup SRCMulti_I2S SamplingRate */
 		tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0);
 		tmp &= 0xfffff1ff;
@@ -723,7 +723,8 @@ static int emu1010_firmware_thread(void *data)
 		if (reg & EMU_HANA_OPTION_DOCK_OFFLINE) {
 			/* Audio Dock attached */
 			/* Return to Audio Dock programming mode */
-			snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware\n");
+			dev_info(emu->card->dev,
+				 "emu1010: Loading Audio Dock Firmware\n");
 			snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, EMU_HANA_FPGA_CONFIG_AUDIODOCK);
 
 			if (!emu->dock_fw) {
@@ -756,19 +757,25 @@ static int emu1010_firmware_thread(void *data)
 
 			snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0);
 			snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &reg);
-			snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_IRQ_STATUS = 0x%x\n", reg);
+			dev_info(emu->card->dev,
+				 "emu1010: EMU_HANA+DOCK_IRQ_STATUS = 0x%x\n",
+				 reg);
 			/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
 			snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg);
-			snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_ID = 0x%x\n", reg);
+			dev_info(emu->card->dev,
+				 "emu1010: EMU_HANA+DOCK_ID = 0x%x\n", reg);
 			if ((reg & 0x1f) != 0x15) {
 				/* FPGA failed to be programmed */
-				snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware file failed, reg = 0x%x\n", reg);
+				dev_info(emu->card->dev,
+					 "emu1010: Loading Audio Dock Firmware file failed, reg = 0x%x\n",
+					 reg);
 				continue;
 			}
-			snd_printk(KERN_INFO "emu1010: Audio Dock Firmware loaded\n");
+			dev_info(emu->card->dev,
+				 "emu1010: Audio Dock Firmware loaded\n");
 			snd_emu1010_fpga_read(emu, EMU_DOCK_MAJOR_REV, &tmp);
 			snd_emu1010_fpga_read(emu, EMU_DOCK_MINOR_REV, &tmp2);
-			snd_printk(KERN_INFO "Audio Dock ver: %u.%u\n",
+			dev_info(emu->card->dev, "Audio Dock ver: %u.%u\n",
 				   tmp, tmp2);
 			/* Sync clocking between 1010 and Dock */
 			/* Allow DLL to settle */
@@ -777,7 +784,7 @@ static int emu1010_firmware_thread(void *data)
 			snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE);
 		}
 	}
-	snd_printk(KERN_INFO "emu1010: firmware thread stopping\n");
+	dev_info(emu->card->dev, "emu1010: firmware thread stopping\n");
 	return 0;
 }
 
@@ -818,7 +825,7 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
 	u32 tmp, tmp2, reg;
 	int err;
 
-	snd_printk(KERN_INFO "emu1010: Special config.\n");
+	dev_info(emu->card->dev, "emu1010: Special config.\n");
 	/* AC97 2.1, Any 16Meg of 4Gig address, Auto-Mute, EMU32 Slave,
 	 * Lock Sound Memory Cache, Lock Tank Memory Cache,
 	 * Mute all codecs.
@@ -843,7 +850,7 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
 
 	/* ID, should read & 0x7f = 0x55. (Bit 7 is the IRQ bit) */
 	snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg);
-	snd_printdd("reg1 = 0x%x\n", reg);
+	dev_dbg(emu->card->dev, "reg1 = 0x%x\n", reg);
 	if ((reg & 0x3f) == 0x15) {
 		/* FPGA netlist already present so clear it */
 		/* Return to programming mode */
@@ -851,13 +858,14 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
 		snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0x02);
 	}
 	snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg);
-	snd_printdd("reg2 = 0x%x\n", reg);
+	dev_dbg(emu->card->dev, "reg2 = 0x%x\n", reg);
 	if ((reg & 0x3f) == 0x15) {
 		/* FPGA failed to return to programming mode */
-		snd_printk(KERN_INFO "emu1010: FPGA failed to return to programming mode\n");
+		dev_info(emu->card->dev,
+			 "emu1010: FPGA failed to return to programming mode\n");
 		return -ENODEV;
 	}
-	snd_printk(KERN_INFO "emu1010: EMU_HANA_ID = 0x%x\n", reg);
+	dev_info(emu->card->dev, "emu1010: EMU_HANA_ID = 0x%x\n", reg);
 
 	if (!emu->firmware) {
 		const char *filename;
@@ -880,16 +888,19 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
 
 		err = request_firmware(&emu->firmware, filename, &emu->pci->dev);
 		if (err != 0) {
-			snd_printk(KERN_ERR "emu1010: firmware: %s not found. Err = %d\n", filename, err);
+			dev_info(emu->card->dev,
+				 "emu1010: firmware: %s not found. Err = %d\n",
+				 filename, err);
 			return err;
 		}
-		snd_printk(KERN_INFO "emu1010: firmware file = %s, size = 0x%zx\n",
+		dev_info(emu->card->dev,
+			 "emu1010: firmware file = %s, size = 0x%zx\n",
 			   filename, emu->firmware->size);
 	}
 
 	err = snd_emu1010_load_firmware(emu, emu->firmware);
 	if (err != 0) {
-		snd_printk(KERN_INFO "emu1010: Loading Firmware failed\n");
+		dev_info(emu->card->dev, "emu1010: Loading Firmware failed\n");
 		return err;
 	}
 
@@ -897,21 +908,23 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
 	snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg);
 	if ((reg & 0x3f) != 0x15) {
 		/* FPGA failed to be programmed */
-		snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file failed, reg = 0x%x\n", reg);
+		dev_info(emu->card->dev,
+			 "emu1010: Loading Hana Firmware file failed, reg = 0x%x\n",
+			 reg);
 		return -ENODEV;
 	}
 
-	snd_printk(KERN_INFO "emu1010: Hana Firmware loaded\n");
+	dev_info(emu->card->dev, "emu1010: Hana Firmware loaded\n");
 	snd_emu1010_fpga_read(emu, EMU_HANA_MAJOR_REV, &tmp);
 	snd_emu1010_fpga_read(emu, EMU_HANA_MINOR_REV, &tmp2);
-	snd_printk(KERN_INFO "emu1010: Hana version: %u.%u\n", tmp, tmp2);
+	dev_info(emu->card->dev, "emu1010: Hana version: %u.%u\n", tmp, tmp2);
 	/* Enable 48Volt power to Audio Dock */
 	snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, EMU_HANA_DOCK_PWR_ON);
 
 	snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &reg);
-	snd_printk(KERN_INFO "emu1010: Card options = 0x%x\n", reg);
+	dev_info(emu->card->dev, "emu1010: Card options = 0x%x\n", reg);
 	snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &reg);
-	snd_printk(KERN_INFO "emu1010: Card options = 0x%x\n", reg);
+	dev_info(emu->card->dev, "emu1010: Card options = 0x%x\n", reg);
 	snd_emu1010_fpga_read(emu, EMU_HANA_OPTICAL_TYPE, &tmp);
 	/* Optical -> ADAT I/O  */
 	/* 0 : SPDIF
@@ -950,7 +963,7 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
 	snd_emu1010_fpga_write(emu, EMU_HANA_IRQ_ENABLE, 0x00);
 
 	snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &reg);
-	snd_printk(KERN_INFO "emu1010: Card options3 = 0x%x\n", reg);
+	dev_info(emu->card->dev, "emu1010: Card options3 = 0x%x\n", reg);
 	/* Default WCLK set to 48kHz. */
 	snd_emu1010_fpga_write(emu, EMU_HANA_DEFCLOCK, 0x00);
 	/* Word Clock source, Internal 48kHz x1 */
@@ -1808,7 +1821,9 @@ int snd_emu10k1_create(struct snd_card *card,
 	emu->revision = pci->revision;
 	pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial);
 	pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &emu->model);
-	snd_printdd("vendor = 0x%x, device = 0x%x, subsystem_vendor_id = 0x%x, subsystem_id = 0x%x\n", pci->vendor, pci->device, emu->serial, emu->model);
+	dev_dbg(card->dev,
+		"vendor = 0x%x, device = 0x%x, subsystem_vendor_id = 0x%x, subsystem_id = 0x%x\n",
+		pci->vendor, pci->device, emu->serial, emu->model);
 
 	for (c = emu_chip_details; c->vendor; c++) {
 		if (c->vendor == pci->vendor && c->device == pci->device) {
@@ -1827,21 +1842,21 @@ int snd_emu10k1_create(struct snd_card *card,
 		}
 	}
 	if (c->vendor == 0) {
-		snd_printk(KERN_ERR "emu10k1: Card not recognised\n");
+		dev_err(card->dev, "emu10k1: Card not recognised\n");
 		kfree(emu);
 		pci_disable_device(pci);
 		return -ENOENT;
 	}
 	emu->card_capabilities = c;
 	if (c->subsystem && !subsystem)
-		snd_printdd("Sound card name = %s\n", c->name);
+		dev_dbg(card->dev, "Sound card name = %s\n", c->name);
 	else if (subsystem)
-		snd_printdd("Sound card name = %s, "
+		dev_dbg(card->dev, "Sound card name = %s, "
 			"vendor = 0x%x, device = 0x%x, subsystem = 0x%x. "
 			"Forced to subsystem = 0x%x\n",	c->name,
 			pci->vendor, pci->device, emu->serial, c->subsystem);
 	else
-		snd_printdd("Sound card name = %s, "
+		dev_dbg(card->dev, "Sound card name = %s, "
 			"vendor = 0x%x, device = 0x%x, subsystem = 0x%x.\n",
 			c->name, pci->vendor, pci->device,
 			emu->serial);
@@ -1869,7 +1884,9 @@ int snd_emu10k1_create(struct snd_card *card,
 	emu->dma_mask = is_audigy ? AUDIGY_DMA_MASK : EMU10K1_DMA_MASK;
 	if (pci_set_dma_mask(pci, emu->dma_mask) < 0 ||
 	    pci_set_consistent_dma_mask(pci, emu->dma_mask) < 0) {
-		snd_printk(KERN_ERR "architecture does not support PCI busmaster DMA with mask 0x%lx\n", emu->dma_mask);
+		dev_err(card->dev,
+			"architecture does not support PCI busmaster DMA with mask 0x%lx\n",
+			emu->dma_mask);
 		kfree(emu);
 		pci_disable_device(pci);
 		return -ENXIO;