summaryrefslogtreecommitdiffstats
path: root/sound/pci/azt3328.c
diff options
context:
space:
mode:
authorClemens Ladisch <clemens@ladisch.de>2011-09-13 11:24:41 +0200
committerTakashi Iwai <tiwai@suse.de>2011-09-14 11:00:51 +0200
commitdba8b46992c55946d3b092934f581a343403118f (patch)
tree7ea5af971bc5cc8ecf4c8af1e0547fa11291ba86 /sound/pci/azt3328.c
parent47124373b59e43fd07cbf7b44d9288f19c1d5a93 (diff)
downloadblackbird-op-linux-dba8b46992c55946d3b092934f581a343403118f.tar.gz
blackbird-op-linux-dba8b46992c55946d3b092934f581a343403118f.zip
ALSA: mpu401: clean up interrupt specification
The semantics of snd_mpu401_uart_new()'s interrupt parameters are somewhat counterintuitive: To prevent the function from allocating its own interrupt, either the irq number must be invalid, or the irq_flags parameter must be zero. At the same time, the irq parameter being invalid specifies that the mpu401 code has to work without an interrupt allocated by the caller. This implies that, if there is an interrupt and it is allocated by the caller, the irq parameter must be set to a valid-looking number which then isn't actually used. With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value, which forces us to handle the parameters differently. This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the device interrupt is handled by the caller, and makes the allocation of the interrupt to depend only on the irq parameter. As suggested by Takashi, the irq_flags parameter was dropped because, when used, it had the constant value IRQF_DISABLED. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/pci/azt3328.c')
-rw-r--r--sound/pci/azt3328.c5
1 files changed, 3 insertions, 2 deletions
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 579fc0dce128..d24fe425e87f 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -2652,8 +2652,9 @@ snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
since our hardware ought to be similar, thus use same ID. */
err = snd_mpu401_uart_new(
card, 0,
- MPU401_HW_AZT2320, chip->mpu_io, MPU401_INFO_INTEGRATED,
- pci->irq, 0, &chip->rmidi
+ MPU401_HW_AZT2320, chip->mpu_io,
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi
);
if (err < 0) {
snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n",
OpenPOWER on IntegriCloud