summaryrefslogtreecommitdiffstats
path: root/net/mac80211/rx.c
diff options
context:
space:
mode:
authorJohannes Berg <johannes@sipsolutions.net>2008-01-29 17:07:43 +0100
committerJohn W. Linville <linville@tuxdriver.com>2008-02-29 15:19:21 -0500
commit38f3714d66b5679aee2a4fe23b1235c3829fcce4 (patch)
tree375e30764e348fd4afb4babb3a54b056e3332894 /net/mac80211/rx.c
parent145de9b693943f052c2c15efbc31b2851fedb6e0 (diff)
downloadblackbird-op-linux-38f3714d66b5679aee2a4fe23b1235c3829fcce4.tar.gz
blackbird-op-linux-38f3714d66b5679aee2a4fe23b1235c3829fcce4.zip
mac80211: dissolve pre-rx handlers
These handlers do not really return a status and the compiler can do a much better job when they're simply static functions that it can inline if appropriate. Also makes the code shorter. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'net/mac80211/rx.c')
-rw-r--r--net/mac80211/rx.c96
1 files changed, 37 insertions, 59 deletions
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 535407d07fa4..3aae8e9e4e0a 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -249,15 +249,7 @@ ieee80211_rx_monitor(struct ieee80211_local *local, struct sk_buff *origskb,
}
-/* pre-rx handlers
- *
- * these don't have dev/sdata fields in the rx data
- * The sta value should also not be used because it may
- * be NULL even though a STA (in IBSS mode) will be added.
- */
-
-static ieee80211_txrx_result
-ieee80211_rx_h_parse_qos(struct ieee80211_txrx_data *rx)
+static void ieee80211_parse_qos(struct ieee80211_txrx_data *rx)
{
u8 *data = rx->skb->data;
int tid;
@@ -290,8 +282,40 @@ ieee80211_rx_h_parse_qos(struct ieee80211_txrx_data *rx)
/* Set skb->priority to 1d tag if highest order bit of TID is not set.
* For now, set skb->priority to 0 for other cases. */
rx->skb->priority = (tid > 7) ? 0 : tid;
+}
- return TXRX_CONTINUE;
+static void ieee80211_verify_ip_alignment(struct ieee80211_txrx_data *rx)
+{
+#ifdef CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT
+ int hdrlen;
+
+ if (!WLAN_FC_DATA_PRESENT(rx->fc))
+ return;
+
+ /*
+ * Drivers are required to align the payload data in a way that
+ * guarantees that the contained IP header is aligned to a four-
+ * byte boundary. In the case of regular frames, this simply means
+ * aligning the payload to a four-byte boundary (because either
+ * the IP header is directly contained, or IV/RFC1042 headers that
+ * have a length divisible by four are in front of it.
+ *
+ * With A-MSDU frames, however, the payload data address must
+ * yield two modulo four because there are 14-byte 802.3 headers
+ * within the A-MSDU frames that push the IP header further back
+ * to a multiple of four again. Thankfully, the specs were sane
+ * enough this time around to require padding each A-MSDU subframe
+ * to a length that is a multiple of four.
+ *
+ * Padding like atheros hardware adds which is inbetween the 802.11
+ * header and the payload is not supported, the driver is required
+ * to move the 802.11 header further back in that case.
+ */
+ hdrlen = ieee80211_get_hdrlen(rx->fc);
+ if (rx->flags & IEEE80211_TXRXD_RX_AMSDU)
+ hdrlen += ETH_HLEN;
+ WARN_ON_ONCE(((unsigned long)(rx->skb->data + hdrlen)) & 3);
+#endif
}
@@ -340,52 +364,6 @@ static u32 ieee80211_rx_load_stats(struct ieee80211_local *local,
return load;
}
-#ifdef CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT
-static ieee80211_txrx_result
-ieee80211_rx_h_verify_ip_alignment(struct ieee80211_txrx_data *rx)
-{
- int hdrlen;
-
- if (!WLAN_FC_DATA_PRESENT(rx->fc))
- return TXRX_CONTINUE;
-
- /*
- * Drivers are required to align the payload data in a way that
- * guarantees that the contained IP header is aligned to a four-
- * byte boundary. In the case of regular frames, this simply means
- * aligning the payload to a four-byte boundary (because either
- * the IP header is directly contained, or IV/RFC1042 headers that
- * have a length divisible by four are in front of it.
- *
- * With A-MSDU frames, however, the payload data address must
- * yield two modulo four because there are 14-byte 802.3 headers
- * within the A-MSDU frames that push the IP header further back
- * to a multiple of four again. Thankfully, the specs were sane
- * enough this time around to require padding each A-MSDU subframe
- * to a length that is a multiple of four.
- *
- * Padding like atheros hardware adds which is inbetween the 802.11
- * header and the payload is not supported, the driver is required
- * to move the 802.11 header further back in that case.
- */
- hdrlen = ieee80211_get_hdrlen(rx->fc);
- if (rx->flags & IEEE80211_TXRXD_RX_AMSDU)
- hdrlen += ETH_HLEN;
- WARN_ON_ONCE(((unsigned long)(rx->skb->data + hdrlen)) & 3);
-
- return TXRX_CONTINUE;
-}
-#endif
-
-ieee80211_rx_handler ieee80211_rx_pre_handlers[] =
-{
- ieee80211_rx_h_parse_qos,
-#ifdef CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT
- ieee80211_rx_h_verify_ip_alignment,
-#endif
- NULL
-};
-
/* rx handlers */
static ieee80211_txrx_result
@@ -1747,9 +1725,9 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
if (unlikely(local->sta_sw_scanning || local->sta_hw_scanning))
rx.flags |= IEEE80211_TXRXD_RXIN_SCAN;
- if (__ieee80211_invoke_rx_handlers(local, local->rx_pre_handlers, &rx,
- sta) != TXRX_CONTINUE)
- goto end;
+ ieee80211_parse_qos(&rx);
+ ieee80211_verify_ip_alignment(&rx);
+
skb = rx.skb;
if (sta && !(sta->flags & (WLAN_STA_WDS | WLAN_STA_ASSOC_AP)) &&
OpenPOWER on IntegriCloud