Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie: "Highlights: - AMD KFD driver merge This is the AMD HSA interface for exposing a lowlevel interface for GPGPU use. They have an open source userspace built on top of this interface, and the code looks as good as it was going to get out of tree. - Initial atomic modesetting work The need for an atomic modesetting interface to allow userspace to try and send a complete set of modesetting state to the driver has arisen, and been suffering from neglect this past year. No more, the start of the common code and changes for msm driver to use it are in this tree. Ongoing work to get the userspace ioctl finished and the code clean will probably wait until next kernel. - DisplayID 1.3 and tiled monitor exposed to userspace. Tiled monitor property is now exposed for userspace to make use of. - Rockchip drm driver merged. - imx gpu driver moved out of staging Other stuff: - core: panel - MIPI DSI + new panels. expose suggested x/y properties for virtual GPUs - i915: Initial Skylake (SKL) support gen3/4 reset work start of dri1/ums removal infoframe tracking fixes for lots of things. - nouveau: tegra k1 voltage support GM204 modesetting support GT21x memory reclocking work - radeon: CI dpm fixes GPUVM improvements Initial DPM fan control - rcar-du: HDMI support added removed some support for old boards slave encoder driver for Analog Devices adv7511 - exynos: Exynos4415 SoC support - msm: a4xx gpu support atomic helper conversion - tegra: iommu support universal plane support ganged-mode DSI support - sti: HDMI i2c improvements - vmwgfx: some late fixes. - qxl: use suggested x/y properties" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits) drm: sti: fix module compilation issue drm/i915: save/restore GMBUS freq across suspend/resume on gen4 drm: sti: correctly cleanup CRTC and planes drm: sti: add HQVDP plane drm: sti: add cursor plane drm: sti: enable auxiliary CRTC drm: sti: fix delay in VTG programming drm: sti: prepare sti_tvout to support auxiliary crtc drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off} drm: sti: fix hdmi avi infoframe drm: sti: remove event lock while disabling vblank drm: sti: simplify gdp code drm: sti: clear all mixer control drm: sti: remove gpio for HDMI hot plug detection drm: sti: allow to change hdmi ddc i2c adapter drm/doc: Document drm_add_modes_noedid() usage drm/i915: Remove '& 0xffff' from the mask given to WA_REG() drm/i915: Invert the mask and val arguments in wa_add() and WA_REG() drm: Zero out DRM object memory upon cleanup drm/i915/bdw: Fix the write setting up the WIZ hashing mode ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2014-12-15 15:52:01 -0800
committer: Linus Torvalds <torvalds@linux-foundation.org> 2014-12-15 15:52:01 -0800
commit: 988adfdffdd43cfd841df734664727993076d7cb (patch)
tree: 6794f7bba8f595500c2b7d33376ad6614adcfaf2 /include
parent: 26178ec11ef3c6c814bf16a0a2b9c2f7242e3c64 (diff)
parent: 4e0cd68115620bc3236ff4e58e4c073948629b41 (diff)
download: blackbird-op-linux-988adfdffdd43cfd841df734664727993076d7cb.tar.gz
blackbird-op-linux-988adfdffdd43cfd841df734664727993076d7cb.zip
25 files changed, 1211 insertions, 188 deletions
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 53ed87698a74..8ba35c622e22 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -125,8 +125,8 @@ struct dma_buf_attachment;
 extern __printf(2, 3)
 void drm_ut_debug_printk(const char *function_name,
 			 const char *format, ...);
-extern __printf(2, 3)
-void drm_err(const char *func, const char *format, ...);
+extern __printf(1, 2)
+void drm_err(const char *format, ...);
 
 /***********************************************************************/
 /** \name DRM template customization defaults */
@@ -155,7 +155,7 @@ void drm_err(const char *func, const char *format, ...);
  * \param arg arguments
  */
 #define DRM_ERROR(fmt, ...)				\
-	drm_err(__func__, fmt, ##__VA_ARGS__)
+	drm_err(fmt, ##__VA_ARGS__)
 
 /**
  * Rate limited error output.  Like DRM_ERROR() but won't flood the log.
@@ -170,7 +170,7 @@ void drm_err(const char *func, const char *format, ...);
 				      DEFAULT_RATELIMIT_BURST);		\
 									\
 	if (__ratelimit(&_rs))						\
-		drm_err(__func__, fmt, ##__VA_ARGS__);			\
+		drm_err(fmt, ##__VA_ARGS__);				\
 })
 
 #define DRM_INFO(fmt, ...)				\
@@ -809,7 +809,7 @@ struct drm_device {
 	struct drm_local_map *agp_buffer_map;
 	unsigned int agp_buffer_token;
 
-        struct drm_mode_config mode_config;	/**< Current mode config */
+	struct drm_mode_config mode_config;	/**< Current mode config */
 
 	/** \name GEM information */
 	/*@{ */
@@ -986,7 +986,7 @@ extern void drm_gem_dmabuf_release(struct dma_buf *dma_buf);
 
 extern int drm_prime_sg_to_page_addr_arrays(struct sg_table *sgt, struct page **pages,
 					    dma_addr_t *addrs, int max_pages);
-extern struct sg_table *drm_prime_pages_to_sg(struct page **pages, int nr_pages);
+extern struct sg_table *drm_prime_pages_to_sg(struct page **pages, unsigned int nr_pages);
 extern void drm_prime_gem_destroy(struct drm_gem_object *obj, struct sg_table *sg);
 
 
@@ -1028,10 +1028,25 @@ void drm_pci_agp_destroy(struct drm_device *dev);
 
 extern int drm_pci_init(struct drm_driver *driver, struct pci_driver *pdriver);
 extern void drm_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver);
+#ifdef CONFIG_PCI
 extern int drm_get_pci_dev(struct pci_dev *pdev,
 			   const struct pci_device_id *ent,
 			   struct drm_driver *driver);
 extern int drm_pci_set_busid(struct drm_device *dev, struct drm_master *master);
+#else
+static inline int drm_get_pci_dev(struct pci_dev *pdev,
+				  const struct pci_device_id *ent,
+				  struct drm_driver *driver)
+{
+	return -ENOSYS;
+}
+
+static inline int drm_pci_set_busid(struct drm_device *dev,
+				    struct drm_master *master)
+{
+	return -ENOSYS;
+}
+#endif
 
 #define DRM_PCIE_SPEED_25 1
 #define DRM_PCIE_SPEED_50 2
diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
new file mode 100644
index 000000000000..ad2229574dd9
--- /dev/null
+++ b/include/drm/drm_atomic.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2014 Red Hat
+ * Copyright (C) 2014 Intel Corp.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Rob Clark <robdclark@gmail.com>
+ * Daniel Vetter <daniel.vetter@ffwll.ch>
+ */
+
+#ifndef DRM_ATOMIC_H_
+#define DRM_ATOMIC_H_
+
+#include <drm/drm_crtc.h>
+
+struct drm_atomic_state * __must_check
+drm_atomic_state_alloc(struct drm_device *dev);
+void drm_atomic_state_clear(struct drm_atomic_state *state);
+void drm_atomic_state_free(struct drm_atomic_state *state);
+
+struct drm_crtc_state * __must_check
+drm_atomic_get_crtc_state(struct drm_atomic_state *state,
+			  struct drm_crtc *crtc);
+struct drm_plane_state * __must_check
+drm_atomic_get_plane_state(struct drm_atomic_state *state,
+			   struct drm_plane *plane);
+struct drm_connector_state * __must_check
+drm_atomic_get_connector_state(struct drm_atomic_state *state,
+			       struct drm_connector *connector);
+
+int __must_check
+drm_atomic_set_crtc_for_plane(struct drm_atomic_state *state,
+			      struct drm_plane *plane, struct drm_crtc *crtc);
+void drm_atomic_set_fb_for_plane(struct drm_plane_state *plane_state,
+				 struct drm_framebuffer *fb);
+int __must_check
+drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state,
+				  struct drm_crtc *crtc);
+int __must_check
+drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
+				   struct drm_crtc *crtc);
+int
+drm_atomic_connectors_for_crtc(struct drm_atomic_state *state,
+			       struct drm_crtc *crtc);
+
+void drm_atomic_legacy_backoff(struct drm_atomic_state *state);
+
+int __must_check drm_atomic_check_only(struct drm_atomic_state *state);
+int __must_check drm_atomic_commit(struct drm_atomic_state *state);
+int __must_check drm_atomic_async_commit(struct drm_atomic_state *state);
+
+#endif /* DRM_ATOMIC_H_ */
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
new file mode 100644
index 000000000000..f956b413311e
--- /dev/null
+++ b/include/drm/drm_atomic_helper.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2014 Red Hat
+ * Copyright (C) 2014 Intel Corp.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Rob Clark <robdclark@gmail.com>
+ * Daniel Vetter <daniel.vetter@ffwll.ch>
+ */
+
+#ifndef DRM_ATOMIC_HELPER_H_
+#define DRM_ATOMIC_HELPER_H_
+
+#include <drm/drm_crtc.h>
+
+int drm_atomic_helper_check(struct drm_device *dev,
+			    struct drm_atomic_state *state);
+int drm_atomic_helper_commit(struct drm_device *dev,
+			     struct drm_atomic_state *state,
+			     bool async);
+
+void drm_atomic_helper_wait_for_vblanks(struct drm_device *dev,
+					struct drm_atomic_state *old_state);
+
+void drm_atomic_helper_commit_pre_planes(struct drm_device *dev,
+					 struct drm_atomic_state *state);
+void drm_atomic_helper_commit_post_planes(struct drm_device *dev,
+					  struct drm_atomic_state *old_state);
+
+int drm_atomic_helper_prepare_planes(struct drm_device *dev,
+				     struct drm_atomic_state *state);
+void drm_atomic_helper_commit_planes(struct drm_device *dev,
+				     struct drm_atomic_state *state);
+void drm_atomic_helper_cleanup_planes(struct drm_device *dev,
+				      struct drm_atomic_state *old_state);
+
+void drm_atomic_helper_swap_state(struct drm_device *dev,
+				  struct drm_atomic_state *state);
+
+/* implementations for legacy interfaces */
+int drm_atomic_helper_update_plane(struct drm_plane *plane,
+				   struct drm_crtc *crtc,
+				   struct drm_framebuffer *fb,
+				   int crtc_x, int crtc_y,
+				   unsigned int crtc_w, unsigned int crtc_h,
+				   uint32_t src_x, uint32_t src_y,
+				   uint32_t src_w, uint32_t src_h);
+int drm_atomic_helper_disable_plane(struct drm_plane *plane);
+int drm_atomic_helper_set_config(struct drm_mode_set *set);
+
+int drm_atomic_helper_crtc_set_property(struct drm_crtc *crtc,
+					struct drm_property *property,
+					uint64_t val);
+int drm_atomic_helper_plane_set_property(struct drm_plane *plane,
+					struct drm_property *property,
+					uint64_t val);
+int drm_atomic_helper_connector_set_property(struct drm_connector *connector,
+					struct drm_property *property,
+					uint64_t val);
+int drm_atomic_helper_page_flip(struct drm_crtc *crtc,
+				struct drm_framebuffer *fb,
+				struct drm_pending_vblank_event *event,
+				uint32_t flags);
+
+/* default implementations for state handling */
+void drm_atomic_helper_crtc_reset(struct drm_crtc *crtc);
+struct drm_crtc_state *
+drm_atomic_helper_crtc_duplicate_state(struct drm_crtc *crtc);
+void drm_atomic_helper_crtc_destroy_state(struct drm_crtc *crtc,
+					  struct drm_crtc_state *state);
+
+void drm_atomic_helper_plane_reset(struct drm_plane *plane);
+struct drm_plane_state *
+drm_atomic_helper_plane_duplicate_state(struct drm_plane *plane);
+void drm_atomic_helper_plane_destroy_state(struct drm_plane *plane,
+					  struct drm_plane_state *state);
+
+void drm_atomic_helper_connector_reset(struct drm_connector *connector);
+struct drm_connector_state *
+drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector);
+void drm_atomic_helper_connector_destroy_state(struct drm_connector *connector,
+					  struct drm_connector_state *state);
+
+/**
+ * drm_atomic_crtc_for_each_plane - iterate over planes currently attached to CRTC
+ * @plane: the loop cursor
+ * @crtc:  the crtc whose planes are iterated
+ *
+ * This iterates over the current state, useful (for example) when applying
+ * atomic state after it has been checked and swapped.  To iterate over the
+ * planes which *will* be attached (for ->atomic_check()) see
+ * drm_crtc_for_each_pending_plane()
+ */
+#define drm_atomic_crtc_for_each_plane(plane, crtc) \
+	drm_for_each_plane_mask(plane, (crtc)->dev, (crtc)->state->plane_mask)
+
+/**
+ * drm_crtc_atomic_state_for_each_plane - iterate over attached planes in new state
+ * @plane: the loop cursor
+ * @crtc_state: the incoming crtc-state
+ *
+ * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be
+ * attached if the specified state is applied.  Useful during (for example)
+ * ->atomic_check() operations, to validate the incoming state
+ */
+#define drm_atomic_crtc_state_for_each_plane(plane, crtc_state) \
+	drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask)
+
+#endif /* DRM_ATOMIC_HELPER_H_ */
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index c40070a92d6b..b86329813ad3 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -42,6 +42,7 @@ struct drm_object_properties;
 struct drm_file;
 struct drm_clip_rect;
 struct device_node;
+struct fence;
 
 #define DRM_MODE_OBJECT_CRTC 0xcccccccc
 #define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0
@@ -136,14 +137,22 @@ struct drm_display_info {
 	u8 cea_rev;
 };
 
+/* data corresponds to displayid vend/prod/serial */
+struct drm_tile_group {
+	struct kref refcount;
+	struct drm_device *dev;
+	int id;
+	u8 group_data[8];
+};
+
 struct drm_framebuffer_funcs {
 	/* note: use drm_framebuffer_remove() */
 	void (*destroy)(struct drm_framebuffer *framebuffer);
 	int (*create_handle)(struct drm_framebuffer *fb,
 			     struct drm_file *file_priv,
 			     unsigned int *handle);
-	/**
-	 * Optinal callback for the dirty fb ioctl.
+	/*
+	 * Optional callback for the dirty fb ioctl.
 	 *
 	 * Userspace can notify the driver via this callback
 	 * that a area of the framebuffer has changed and should
@@ -196,7 +205,7 @@ struct drm_framebuffer {
 struct drm_property_blob {
 	struct drm_mode_object base;
 	struct list_head head;
-	unsigned int length;
+	size_t length;
 	unsigned char data[];
 };
 
@@ -215,7 +224,7 @@ struct drm_property {
 	uint64_t *values;
 	struct drm_device *dev;
 
-	struct list_head enum_blob_list;
+	struct list_head enum_list;
 };
 
 struct drm_crtc;
@@ -224,19 +233,65 @@ struct drm_encoder;
 struct drm_pending_vblank_event;
 struct drm_plane;
 struct drm_bridge;
+struct drm_atomic_state;
 
 /**
- * drm_crtc_funcs - control CRTCs for a given device
+ * struct drm_crtc_state - mutable CRTC state
+ * @enable: whether the CRTC should be enabled, gates all other state
+ * @mode_changed: for use by helpers and drivers when computing state updates
+ * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes
+ * @last_vblank_count: for helpers and drivers to capture the vblank of the
+ * 	update to ensure framebuffer cleanup isn't done too early
+ * @planes_changed: for use by helpers and drivers when computing state updates
+ * @adjusted_mode: for use by helpers and drivers to compute adjusted mode timings
+ * @mode: current mode timings
+ * @event: optional pointer to a DRM event to signal upon completion of the
+ * 	state update
+ * @state: backpointer to global drm_atomic_state
+ */
+struct drm_crtc_state {
+	bool enable;
+
+	/* computed state bits used by helpers and drivers */
+	bool planes_changed : 1;
+	bool mode_changed : 1;
+
+	/* attached planes bitmask:
+	 * WARNING: transitional helpers do not maintain plane_mask so
+	 * drivers not converted over to atomic helpers should not rely
+	 * on plane_mask being accurate!
+	 */
+	u32 plane_mask;
+
+	/* last_vblank_count: for vblank waits before cleanup */
+	u32 last_vblank_count;
+
+	/* adjusted_mode: for use by helpers and drivers */
+	struct drm_display_mode adjusted_mode;
+
+	struct drm_display_mode mode;
+
+	struct drm_pending_vblank_event *event;
+
+	struct drm_atomic_state *state;
+};
+
+/**
+ * struct drm_crtc_funcs - control CRTCs for a given device
  * @save: save CRTC state
  * @restore: restore CRTC state
  * @reset: reset CRTC after state has been invalidated (e.g. resume)
  * @cursor_set: setup the cursor
+ * @cursor_set2: setup the cursor with hotspot, superseeds @cursor_set if set
  * @cursor_move: move the cursor
  * @gamma_set: specify color ramp for CRTC
  * @destroy: deinit and free object
  * @set_property: called when a property is changed
  * @set_config: apply a new CRTC configuration
  * @page_flip: initiate a page flip
+ * @atomic_duplicate_state: duplicate the atomic state for this CRTC
+ * @atomic_destroy_state: destroy an atomic state for this CRTC
+ * @atomic_set_property: set a property on an atomic state for this CRTC
  *
  * The drm_crtc_funcs structure is the central CRTC management structure
  * in the DRM.  Each CRTC controls one or more connectors (note that the name
@@ -287,16 +342,28 @@ struct drm_crtc_funcs {
 
 	int (*set_property)(struct drm_crtc *crtc,
 			    struct drm_property *property, uint64_t val);
+
+	/* atomic update handling */
+	struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc);
+	void (*atomic_destroy_state)(struct drm_crtc *crtc,
+				     struct drm_crtc_state *state);
+	int (*atomic_set_property)(struct drm_crtc *crtc,
+				   struct drm_crtc_state *state,
+				   struct drm_property *property,
+				   uint64_t val);
 };
 
 /**
- * drm_crtc - central CRTC control structure
+ * struct drm_crtc - central CRTC control structure
  * @dev: parent DRM device
+ * @port: OF node used by drm_of_find_possible_crtcs()
  * @head: list management
  * @mutex: per-CRTC locking
  * @base: base KMS object for ID tracking etc.
  * @primary: primary plane for this CRTC
  * @cursor: cursor plane for this CRTC
+ * @cursor_x: current x position of the cursor, used for universal cursor planes
+ * @cursor_y: current y position of the cursor, used for universal cursor planes
  * @enabled: is this CRTC enabled?
  * @mode: current mode timings
  * @hwmode: mode timings as programmed to hw regs
@@ -309,10 +376,13 @@ struct drm_crtc_funcs {
  * @gamma_size: size of gamma ramp
  * @gamma_store: gamma ramp values
  * @framedur_ns: precise frame timing
- * @framedur_ns: precise line timing
+ * @linedur_ns: precise line timing
  * @pixeldur_ns: precise pixel timing
  * @helper_private: mid-layer private data
  * @properties: property tracking for this CRTC
+ * @state: current atomic state for this CRTC
+ * @acquire_ctx: per-CRTC implicit acquire context used by atomic drivers for
+ * 	legacy ioctls
  *
  * Each CRTC may have one or more connectors associated with it.  This structure
  * allows the CRTC to be controlled.
@@ -322,7 +392,7 @@ struct drm_crtc {
 	struct device_node *port;
 	struct list_head head;
 
-	/**
+	/*
 	 * crtc mutex
 	 *
 	 * This provides a read lock for the overall crtc state (mode, dpms
@@ -368,6 +438,8 @@ struct drm_crtc {
 
 	struct drm_object_properties properties;
 
+	struct drm_crtc_state *state;
+
 	/*
 	 * For legacy crtc ioctls so that atomic drivers can get at the locking
 	 * acquire context.
@@ -375,9 +447,22 @@ struct drm_crtc {
 	struct drm_modeset_acquire_ctx *acquire_ctx;
 };
 
+/**
+ * struct drm_connector_state - mutable connector state
+ * @crtc: CRTC to connect connector to, NULL if disabled
+ * @best_encoder: can be used by helpers and drivers to select the encoder
+ * @state: backpointer to global drm_atomic_state
+ */
+struct drm_connector_state {
+	struct drm_crtc *crtc;  /* do not write directly, use drm_atomic_set_crtc_for_connector() */
+
+	struct drm_encoder *best_encoder;
+
+	struct drm_atomic_state *state;
+};
 
 /**
- * drm_connector_funcs - control connectors on a given device
+ * struct drm_connector_funcs - control connectors on a given device
  * @dpms: set power state (see drm_crtc_funcs above)
  * @save: save connector state
  * @restore: restore connector state
@@ -387,6 +472,9 @@ struct drm_crtc {
  * @set_property: property for this connector may need an update
  * @destroy: make object go away
  * @force: notify the driver that the connector is forced on
+ * @atomic_duplicate_state: duplicate the atomic state for this connector
+ * @atomic_destroy_state: destroy an atomic state for this connector
+ * @atomic_set_property: set a property on an atomic state for this connector
  *
  * Each CRTC may have one or more connectors attached to it.  The functions
  * below allow the core DRM code to control connectors, enumerate available modes,
@@ -411,10 +499,19 @@ struct drm_connector_funcs {
 			     uint64_t val);
 	void (*destroy)(struct drm_connector *connector);
 	void (*force)(struct drm_connector *connector);
+
+	/* atomic update handling */
+	struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);
+	void (*atomic_destroy_state)(struct drm_connector *connector,
+				     struct drm_connector_state *state);
+	int (*atomic_set_property)(struct drm_connector *connector,
+				   struct drm_connector_state *state,
+				   struct drm_property *property,
+				   uint64_t val);
 };
 
 /**
- * drm_encoder_funcs - encoder controls
+ * struct drm_encoder_funcs - encoder controls
  * @reset: reset state (e.g. at init or resume time)
  * @destroy: cleanup and free associated data
  *
@@ -428,7 +525,7 @@ struct drm_encoder_funcs {
 #define DRM_CONNECTOR_MAX_ENCODER 3
 
 /**
- * drm_encoder - central DRM encoder structure
+ * struct drm_encoder - central DRM encoder structure
  * @dev: parent DRM device
  * @head: list management
  * @base: base KMS object
@@ -472,7 +569,7 @@ struct drm_encoder {
 #define MAX_ELD_BYTES	128
 
 /**
- * drm_connector - central DRM connector control structure
+ * struct drm_connector - central DRM connector control structure
  * @dev: parent DRM device
  * @kdev: kernel device for sysfs attributes
  * @attr: sysfs attributes
@@ -483,6 +580,7 @@ struct drm_encoder {
  * @connector_type_id: index into connector type enum
  * @interlace_allowed: can this connector handle interlaced modes?
  * @doublescan_allowed: can this connector handle doublescan?
+ * @stereo_allowed: can this connector handle stereo modes?
  * @modes: modes available on this connector (from fill_modes() + user)
  * @status: one of the drm_connector_status enums (connected, not, or unknown)
  * @probed_modes: list of modes derived directly from the display
@@ -490,10 +588,13 @@ struct drm_encoder {
  * @funcs: connector control functions
  * @edid_blob_ptr: DRM property containing EDID if present
  * @properties: property tracking for this connector
+ * @path_blob_ptr: DRM blob property data for the DP MST path property
  * @polled: a %DRM_CONNECTOR_POLL_<foo> value for core driven polling
  * @dpms: current dpms state
  * @helper_private: mid-layer private data
+ * @cmdline_mode: mode line parsed from the kernel cmdline for this connector
  * @force: a %DRM_FORCE_<foo> state for forced mode sets
+ * @override_edid: has the EDID been overwritten through debugfs for testing?
  * @encoder_ids: valid encoders for this connector
  * @encoder: encoder driving this connector, if any
  * @eld: EDID-like data, if present
@@ -503,6 +604,18 @@ struct drm_encoder {
  * @video_latency: video latency info from ELD, if found
  * @audio_latency: audio latency info from ELD, if found
  * @null_edid_counter: track sinks that give us all zeros for the EDID
+ * @bad_edid_counter: track sinks that give us an EDID with invalid checksum
+ * @debugfs_entry: debugfs directory for this connector
+ * @state: current atomic state for this connector
+ * @has_tile: is this connector connected to a tiled monitor
+ * @tile_group: tile group for the connected monitor
+ * @tile_is_single_monitor: whether the tile is one monitor housing
+ * @num_h_tile: number of horizontal tiles in the tile group
+ * @num_v_tile: number of vertical tiles in the tile group
+ * @tile_h_loc: horizontal location of this tile
+ * @tile_v_loc: vertical location of this tile
+ * @tile_h_size: horizontal size of this tile.
+ * @tile_v_size: vertical size of this tile.
  *
  * Each connector may be connected to one or more CRTCs, or may be clonable by
  * another connector if they can share a CRTC.  Each connector also has a specific
@@ -538,6 +651,8 @@ struct drm_connector {
 
 	struct drm_property_blob *path_blob_ptr;
 
+	struct drm_property_blob *tile_blob_ptr;
+
 	uint8_t polled; /* DRM_CONNECTOR_POLL_* */
 
 	/* requested DPMS state */
@@ -563,14 +678,63 @@ struct drm_connector {
 	unsigned bad_edid_counter;
 
 	struct dentry *debugfs_entry;
+
+	struct drm_connector_state *state;
+
+	/* DisplayID bits */
+	bool has_tile;
+	struct drm_tile_group *tile_group;
+	bool tile_is_single_monitor;
+
+	uint8_t num_h_tile, num_v_tile;
+	uint8_t tile_h_loc, tile_v_loc;
+	uint16_t tile_h_size, tile_v_size;
+};
+
+/**
+ * struct drm_plane_state - mutable plane state
+ * @crtc: currently bound CRTC, NULL if disabled
+ * @fb: currently bound framebuffer
+ * @fence: optional fence to wait for before scanning out @fb
+ * @crtc_x: left position of visible portion of plane on crtc
+ * @crtc_y: upper position of visible portion of plane on crtc
+ * @crtc_w: width of visible portion of plane on crtc
+ * @crtc_h: height of visible portion of plane on crtc
+ * @src_x: left position of visible portion of plane within
+ *	plane (in 16.16)
+ * @src_y: upper position of visible portion of plane within
+ *	plane (in 16.16)
+ * @src_w: width of visible portion of plane (in 16.16)
+ * @src_h: height of visible portion of plane (in 16.16)
+ * @state: backpointer to global drm_atomic_state
+ */
+struct drm_plane_state {
+	struct drm_crtc *crtc;   /* do not write directly, use drm_atomic_set_crtc_for_plane() */
+	struct drm_framebuffer *fb;  /* do not write directly, use drm_atomic_set_fb_for_plane() */
+	struct fence *fence;
+
+	/* Signed dest location allows it to be partially off screen */
+	int32_t crtc_x, crtc_y;
+	uint32_t crtc_w, crtc_h;
+
+	/* Source values are 16.16 fixed point */
+	uint32_t src_x, src_y;
+	uint32_t src_h, src_w;
+
+	struct drm_atomic_state *state;
 };
 
+
 /**
- * drm_plane_funcs - driver plane control functions
+ * struct drm_plane_funcs - driver plane control functions
  * @update_plane: update the plane configuration
  * @disable_plane: shut down the plane
  * @destroy: clean up plane resources
+ * @reset: reset plane after state has been invalidated (e.g. resume)
  * @set_property: called when a property is changed
+ * @atomic_duplicate_state: duplicate the atomic state for this plane
+ * @atomic_destroy_state: destroy an atomic state for this plane
+ * @atomic_set_property: set a property on an atomic state for this plane
  */
 struct drm_plane_funcs {
 	int (*update_plane)(struct drm_plane *plane,
@@ -585,6 +749,15 @@ struct drm_plane_funcs {
 
 	int (*set_property)(struct drm_plane *plane,
 			    struct drm_property *property, uint64_t val);
+
+	/* atomic update handling */
+	struct drm_plane_state *(*atomic_duplicate_state)(struct drm_plane *plane);
+	void (*atomic_destroy_state)(struct drm_plane *plane,
+				     struct drm_plane_state *state);
+	int (*atomic_set_property)(struct drm_plane *plane,
+				   struct drm_plane_state *state,
+				   struct drm_property *property,
+				   uint64_t val);
 };
 
 enum drm_plane_type {
@@ -594,7 +767,7 @@ enum drm_plane_type {
 };
 
 /**
- * drm_plane - central DRM plane control structure
+ * struct drm_plane - central DRM plane control structure
  * @dev: DRM device this plane belongs to
  * @head: for list management
  * @base: base mode object
@@ -603,14 +776,19 @@ enum drm_plane_type {
  * @format_count: number of formats supported
  * @crtc: currently bound CRTC
  * @fb: currently bound fb
+ * @old_fb: Temporary tracking of the old fb while a modeset is ongoing. Used by
+ * 	drm_mode_set_config_internal() to implement correct refcounting.
  * @funcs: helper functions
  * @properties: property tracking for this plane
  * @type: type of plane (overlay, primary, cursor)
+ * @state: current atomic state for this plane
  */
 struct drm_plane {
 	struct drm_device *dev;
 	struct list_head head;
 
+	struct drm_modeset_lock mutex;
+
 	struct drm_mode_object base;
 
 	uint32_t possible_crtcs;
@@ -620,8 +798,6 @@ struct drm_plane {
 	struct drm_crtc *crtc;
 	struct drm_framebuffer *fb;
 
-	/* Temporary tracking of the old fb while a modeset is ongoing. Used
-	 * by drm_mode_set_config_internal to implement correct refcounting. */
 	struct drm_framebuffer *old_fb;
 
 	const struct drm_plane_funcs *funcs;
@@ -629,10 +805,14 @@ struct drm_plane {
 	struct drm_object_properties properties;
 
 	enum drm_plane_type type;
+
+	void *helper_private;
+
+	struct drm_plane_state *state;
 };
 
 /**
- * drm_bridge_funcs - drm_bridge control functions
+ * struct drm_bridge_funcs - drm_bridge control functions
  * @mode_fixup: Try to fixup (or reject entirely) proposed mode for this bridge
  * @disable: Called right before encoder prepare, disables the bridge
  * @post_disable: Called right after encoder prepare, for lockstepped disable
@@ -656,7 +836,7 @@ struct drm_bridge_funcs {
 };
 
 /**
- * drm_bridge - central DRM bridge control structure
+ * struct drm_bridge - central DRM bridge control structure
  * @dev: DRM device this bridge belongs to
  * @head: list management
  * @base: base mode object
@@ -674,8 +854,35 @@ struct drm_bridge {
 };
 
 /**
- * drm_mode_set - new values for a CRTC config change
- * @head: list management
+ * struct struct drm_atomic_state - the global state object for atomic updates
+ * @dev: parent DRM device
+ * @flags: state flags like async update
+ * @planes: pointer to array of plane pointers
+ * @plane_states: pointer to array of plane states pointers
+ * @crtcs: pointer to array of CRTC pointers
+ * @crtc_states: pointer to array of CRTC states pointers
+ * @num_connector: size of the @connectors and @connector_states arrays
+ * @connectors: pointer to array of connector pointers
+ * @connector_states: pointer to array of connector states pointers
+ * @acquire_ctx: acquire context for this atomic modeset state update
+ */
+struct drm_atomic_state {
+	struct drm_device *dev;
+	uint32_t flags;
+	struct drm_plane **planes;
+	struct drm_plane_state **plane_states;
+	struct drm_crtc **crtcs;
+	struct drm_crtc_state **crtc_states;
+	int num_connector;
+	struct drm_connector **connectors;
+	struct drm_connector_state **connector_states;
+
+	struct drm_modeset_acquire_ctx *acquire_ctx;
+};
+
+
+/**
+ * struct drm_mode_set - new values for a CRTC config change
  * @fb: framebuffer to use for new config
  * @crtc: CRTC whose configuration we're about to change
  * @mode: mode timings to use
@@ -705,6 +912,9 @@ struct drm_mode_set {
  * struct drm_mode_config_funcs - basic driver provided mode setting functions
  * @fb_create: create a new framebuffer object
  * @output_poll_changed: function to handle output configuration changes
+ * @atomic_check: check whether a give atomic state update is possible
+ * @atomic_commit: commit an atomic state update previously verified with
+ * 	atomic_check()
  *
  * Some global (i.e. not per-CRTC, connector, etc) mode setting functions that
  * involve drivers.
@@ -714,13 +924,20 @@ struct drm_mode_config_funcs {
 					     struct drm_file *file_priv,
 					     struct drm_mode_fb_cmd2 *mode_cmd);
 	void (*output_poll_changed)(struct drm_device *dev);
+
+	int (*atomic_check)(struct drm_device *dev,
+			    struct drm_atomic_state *a);
+	int (*atomic_commit)(struct drm_device *dev,
+			     struct drm_atomic_state *a,
+			     bool async);
 };
 
 /**
- * drm_mode_group - group of mode setting resources for potential sub-grouping
+ * struct drm_mode_group - group of mode setting resources for potential sub-grouping
  * @num_crtcs: CRTC count
  * @num_encoders: encoder count
  * @num_connectors: connector count
+ * @num_bridges: bridge count
  * @id_list: list of KMS object IDs in this group
  *
  * Currently this simply tracks the global mode setting state.  But in the
@@ -740,10 +957,14 @@ struct drm_mode_group {
 };
 
 /**
- * drm_mode_config - Mode configuration control structure
+ * struct drm_mode_config - Mode configuration control structure
  * @mutex: mutex protecting KMS related lists and structures
+ * @connection_mutex: ww mutex protecting connector state and routing
+ * @acquire_ctx: global implicit acquire context used by atomic drivers for
+ * 	legacy ioctls
  * @idr_mutex: mutex for KMS ID allocation and management
  * @crtc_idr: main KMS ID tracking object
+ * @fb_lock: mutex to protect fb state and lists
  * @num_fb: number of fbs available
  * @fb_list: list of framebuffers available
  * @num_connector: number of connectors on this device
@@ -752,17 +973,28 @@ struct drm_mode_group {
  * @bridge_list: list of bridge objects
  * @num_encoder: number of encoders on this device
  * @encoder_list: list of encoder objects
+ * @num_overlay_plane: number of overlay planes on this device
+ * @num_total_plane: number of universal (i.e. with primary/curso) planes on this device
+ * @plane_list: list of plane objects
  * @num_crtc: number of CRTCs on this device
  * @crtc_list: list of CRTC objects
+ * @property_list: list of property objects
  * @min_width: minimum pixel width on this device
  * @min_height: minimum pixel height on this device
  * @max_width: maximum pixel width on this device
  * @max_height: maximum pixel height on this device
  * @funcs: core driver provided mode setting functions
  * @fb_base: base address of the framebuffer
- * @poll_enabled: track polling status for this device
+ * @poll_enabled: track polling support for this device
+ * @poll_running: track polling status for this device
  * @output_poll_work: delayed work for polling in process context
+ * @property_blob_list: list of all the blob property objects
  * @*_property: core property tracking
+ * @preferred_depth: preferred RBG pixel depth, used by fb helpers
+ * @prefer_shadow: hint to userspace to prefer shadow-fb rendering
+ * @async_page_flip: does this device support async flips on the primary plane?
+ * @cursor_width: hint to userspace for max cursor width
+ * @cursor_height: hint to userspace for max cursor height
  *
  * Core mode resource tracking structure.  All CRTC, encoders, and connectors
  * enumerated by the driver are added here, as are global properties.  Some
@@ -774,16 +1006,10 @@ struct drm_mode_config {
 	struct drm_modeset_acquire_ctx *acquire_ctx; /* for legacy _lock_all() / _unlock_all() */
 	struct mutex idr_mutex; /* for IDR management */
 	struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */
+	struct idr tile_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */
 	/* this is limited to one for now */
 
-
-	/**
-	 * fb_lock - mutex to protect fb state
-	 *
-	 * Besides the global fb list his also protects the fbs list in the
-	 * file_priv
-	 */
-	struct mutex fb_lock;
+	struct mutex fb_lock; /* proctects global and per-file fb lists */
 	int num_fb;
 	struct list_head fb_list;
 
@@ -824,6 +1050,7 @@ struct drm_mode_config {
 	struct drm_property *edid_property;
 	struct drm_property *dpms_property;
 	struct drm_property *path_property;
+	struct drm_property *tile_property;
 	struct drm_property *plane_type_property;
 	struct drm_property *rotation_property;
 
@@ -851,6 +1078,10 @@ struct drm_mode_config {
 	struct drm_property *aspect_ratio_property;
 	struct drm_property *dirty_info_property;
 
+	/* properties for virtual machine layout */
+	struct drm_property *suggested_x_property;
+	struct drm_property *suggested_y_property;
+
 	/* dumb ioctl parameters */
 	uint32_t preferred_depth, prefer_shadow;
 
@@ -861,6 +1092,19 @@ struct drm_mode_config {
 	uint32_t cursor_width, cursor_height;
 };
 
+/**
+ * drm_for_each_plane_mask - iterate over planes specified by bitmask
+ * @plane: the loop cursor
+ * @dev: the DRM device
+ * @plane_mask: bitmask of plane indices
+ *
+ * Iterate over all planes specified by bitmask.
+ */
+#define drm_for_each_plane_mask(plane, dev, plane_mask) \
+	list_for_each_entry((plane), &(dev)->mode_config.plane_list, head) \
+		if ((plane_mask) & (1 << drm_plane_index(plane)))
+
+
 #define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
 #define obj_to_connector(x) container_of(x, struct drm_connector, base)
 #define obj_to_encoder(x) container_of(x, struct drm_encoder, base)
@@ -880,9 +1124,6 @@ extern int drm_crtc_init_with_planes(struct drm_device *dev,
 				     struct drm_plane *primary,
 				     struct drm_plane *cursor,
 				     const struct drm_crtc_funcs *funcs);
-extern int drm_crtc_init(struct drm_device *dev,
-			 struct drm_crtc *crtc,
-			 const struct drm_crtc_funcs *funcs);
 extern void drm_crtc_cleanup(struct drm_crtc *crtc);
 extern unsigned int drm_crtc_index(struct drm_crtc *crtc);
 
@@ -978,9 +1219,10 @@ extern void drm_mode_config_reset(struct drm_device *dev);
 extern void drm_mode_config_cleanup(struct drm_device *dev);
 
 extern int drm_mode_connector_set_path_property(struct drm_connector *connector,
-						char *path);
+						const char *path);
+int drm_mode_connector_set_tile_property(struct drm_connector *connector);
 extern int drm_mode_connector_update_edid_property(struct drm_connector *connector,
-						struct edid *edid);
+						   const struct edid *edid);
 
 static inline bool drm_property_type_is(struct drm_property *property,
 		uint32_t type)
@@ -1041,11 +1283,13 @@ extern void drm_property_destroy(struct drm_device *dev, struct drm_property *pr
 extern int drm_property_add_enum(struct drm_property *property, int index,
 				 uint64_t value, const char *name);
 extern int drm_mode_create_dvi_i_properties(struct drm_device *dev);
-extern int drm_mode_create_tv_properties(struct drm_device *dev, int num_formats,
-				     char *formats[]);
+extern int drm_mode_create_tv_properties(struct drm_device *dev,
+					 unsigned int num_modes,
+					 char *modes[]);
 extern int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 extern int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
 extern int drm_mode_create_dirty_info_property(struct drm_device *dev);
+extern int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
 
 extern int drm_mode_connector_attach_encoder(struct drm_connector *connector,
 					     struct drm_encoder *encoder);
@@ -1113,6 +1357,13 @@ extern void drm_set_preferred_mode(struct drm_connector *connector,
 extern int drm_edid_header_is_valid(const u8 *raw_edid);
 extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid);
 extern bool drm_edid_is_valid(struct edid *edid);
+
+extern struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
+							 char topology[8]);
+extern struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
+					       char topology[8]);
+extern void drm_mode_put_tile_group(struct drm_device *dev,
+				   struct drm_tile_group *tg);
 struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
 					   int hsize, int vsize, int fresh,
 					   bool rb);
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index a3d75fefd010..7adbb65ea8ae 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -68,6 +68,7 @@ struct drm_crtc_helper_funcs {
 	int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
 			struct drm_display_mode *adjusted_mode, int x, int y,
 			struct drm_framebuffer *old_fb);
+	void (*mode_set_nofb)(struct drm_crtc *crtc);
 
 	/* Move the crtc on the current fb to the given position *optional* */
 	int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
@@ -81,6 +82,12 @@ struct drm_crtc_helper_funcs {
 
 	/* disable crtc when not in use - more explicit than dpms off */
 	void (*disable)(struct drm_crtc *crtc);
+
+	/* atomic helpers */
+	int (*atomic_check)(struct drm_crtc *crtc,
+			    struct drm_crtc_state *state);
+	void (*atomic_begin)(struct drm_crtc *crtc);
+	void (*atomic_flush)(struct drm_crtc *crtc);
 };
 
 /**
@@ -161,6 +168,12 @@ static inline void drm_connector_helper_add(struct drm_connector *connector,
 
 extern void drm_helper_resume_force_mode(struct drm_device *dev);
 
+int drm_helper_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
+			     struct drm_display_mode *adjusted_mode, int x, int y,
+			     struct drm_framebuffer *old_fb);
+int drm_helper_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+				  struct drm_framebuffer *old_fb);
+
 /* drm_probe_helper.c */
 extern int drm_helper_probe_single_connector_modes(struct drm_connector
 						   *connector, uint32_t maxX,
diff --git a/include/drm/drm_displayid.h b/include/drm/drm_displayid.h
new file mode 100644
index 000000000000..623b4e98e748
--- /dev/null
+++ b/include/drm/drm_displayid.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright © 2014 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#ifndef DRM_DISPLAYID_H
+#define DRM_DISPLAYID_H
+
+#define DATA_BLOCK_PRODUCT_ID 0x00
+#define DATA_BLOCK_DISPLAY_PARAMETERS 0x01
+#define DATA_BLOCK_COLOR_CHARACTERISTICS 0x02
+#define DATA_BLOCK_TYPE_1_DETAILED_TIMING 0x03
+#define DATA_BLOCK_TYPE_2_DETAILED_TIMING 0x04
+#define DATA_BLOCK_TYPE_3_SHORT_TIMING 0x05
+#define DATA_BLOCK_TYPE_4_DMT_TIMING 0x06
+#define DATA_BLOCK_VESA_TIMING 0x07
+#define DATA_BLOCK_CEA_TIMING 0x08
+#define DATA_BLOCK_VIDEO_TIMING_RANGE 0x09
+#define DATA_BLOCK_PRODUCT_SERIAL_NUMBER 0x0a
+#define DATA_BLOCK_GP_ASCII_STRING 0x0b
+#define DATA_BLOCK_DISPLAY_DEVICE_DATA 0x0c
+#define DATA_BLOCK_INTERFACE_POWER_SEQUENCING 0x0d
+#define DATA_BLOCK_TRANSFER_CHARACTERISTICS 0x0e
+#define DATA_BLOCK_DISPLAY_INTERFACE 0x0f
+#define DATA_BLOCK_STEREO_DISPLAY_INTERFACE 0x10
+#define DATA_BLOCK_TILED_DISPLAY 0x12
+
+#define DATA_BLOCK_VENDOR_SPECIFIC 0x7f
+
+#define PRODUCT_TYPE_EXTENSION 0
+#define PRODUCT_TYPE_TEST 1
+#define PRODUCT_TYPE_PANEL 2
+#define PRODUCT_TYPE_MONITOR 3
+#define PRODUCT_TYPE_TV 4
+#define PRODUCT_TYPE_REPEATER 5
+#define PRODUCT_TYPE_DIRECT_DRIVE 6
+
+struct displayid_hdr {
+	u8 rev;
+	u8 bytes;
+	u8 prod_id;
+	u8 ext_count;
+} __packed;
+
+struct displayid_block {
+	u8 tag;
+	u8 rev;
+	u8 num_bytes;
+} __packed;
+
+struct displayid_tiled_block {
+	struct displayid_block base;
+	u8 tile_cap;
+	u8 topo[3];
+	u8 tile_size[4];
+	u8 tile_pixel_bezel[5];
+	u8 topology_id[8];
+} __packed;
+
+#endif
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 9305c718d789..11f8c84f98ce 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -303,7 +303,8 @@
 #define DP_TEST_CRC_B_CB		    0x244
 
 #define DP_TEST_SINK_MISC		    0x246
-#define DP_TEST_CRC_SUPPORTED		    (1 << 5)
+# define DP_TEST_CRC_SUPPORTED		    (1 << 5)
+# define DP_TEST_COUNT_MASK		    0x7
 
 #define DP_TEST_RESPONSE		    0x260
 # define DP_TEST_ACK			    (1 << 0)
@@ -313,7 +314,7 @@
 #define DP_TEST_EDID_CHECKSUM		    0x261
 
 #define DP_TEST_SINK			    0x270
-#define DP_TEST_SINK_START	    (1 << 0)
+# define DP_TEST_SINK_START		    (1 << 0)
 
 #define DP_PAYLOAD_TABLE_UPDATE_STATUS      0x2c0   /* 1.2 MST */
 # define DP_PAYLOAD_TABLE_UPDATED           (1 << 0)
@@ -404,26 +405,6 @@
 #define MODE_I2C_READ	4
 #define MODE_I2C_STOP	8
 
-/**
- * struct i2c_algo_dp_aux_data - driver interface structure for i2c over dp
- * 				 aux algorithm
- * @running: set by the algo indicating whether an i2c is ongoing or whether
- * 	     the i2c bus is quiescent
- * @address: i2c target address for the currently ongoing transfer
- * @aux_ch: driver callback to transfer a single byte of the i2c payload
- */
-struct i2c_algo_dp_aux_data {
-	bool running;
-	u16 address;
-	int (*aux_ch) (struct i2c_adapter *adapter,
-		       int mode, uint8_t write_byte,
-		       uint8_t *read_byte);
-};
-
-int
-i2c_dp_aux_add_bus(struct i2c_adapter *adapter);
-
-
 #define DP_LINK_STATUS_SIZE	   6
 bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
 			  int lane_count);
@@ -550,6 +531,7 @@ struct drm_dp_aux {
 	struct mutex hw_mutex;
 	ssize_t (*transfer)(struct drm_dp_aux *aux,
 			    struct drm_dp_aux_msg *msg);
+	unsigned i2c_nack_count, i2c_defer_count;
 };
 
 ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset,
diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
index 338fc1053835..00c1da927245 100644
--- a/include/drm/drm_dp_mst_helper.h
+++ b/include/drm/drm_dp_mst_helper.h
@@ -28,7 +28,7 @@
 struct drm_dp_mst_branch;
 
 /**
- * struct drm_dp_vcpi - Virtual Channel Payload Identifer
+ * struct drm_dp_vcpi - Virtual Channel Payload Identifier
  * @vcpi: Virtual channel ID.
  * @pbn: Payload Bandwidth Number for this channel
  * @aligned_pbn: PBN aligned with slot size
@@ -92,6 +92,8 @@ struct drm_dp_mst_port {
 	struct drm_dp_vcpi vcpi;
 	struct drm_connector *connector;
 	struct drm_dp_mst_topology_mgr *mgr;
+
+	struct edid *cached_edid; /* for DP logical ports - make tiling work */
 };
 
 /**
@@ -371,7 +373,7 @@ struct drm_dp_sideband_msg_tx {
 struct drm_dp_mst_topology_mgr;
 struct drm_dp_mst_topology_cbs {
 	/* create a connector for a port */
-	struct drm_connector *(*add_connector)(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port, char *path);
+	struct drm_connector *(*add_connector)(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port, const char *path);
 	void (*destroy_connector)(struct drm_dp_mst_topology_mgr *mgr,
 				  struct drm_connector *connector);
 	void (*hotplug)(struct drm_dp_mst_topology_mgr *mgr);
@@ -474,7 +476,7 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
 int drm_dp_mst_hpd_irq(struct drm_dp_mst_topology_mgr *mgr, u8 *esi, bool *handled);
 
 
-enum drm_connector_status drm_dp_mst_detect_port(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port);
+enum drm_connector_status drm_dp_mst_detect_port(struct drm_connector *connector, struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port);
 
 struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port);
 
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index b96031d947a0..87d85e81d3a7 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -27,12 +27,14 @@
 
 #define EDID_LENGTH 128
 #define DDC_ADDR 0x50
+#define DDC_ADDR2 0x52 /* E-DDC 1.2 - where DisplayID can hide */
 
 #define CEA_EXT	    0x02
 #define VTB_EXT	    0x10
 #define DI_EXT	    0x40
 #define LS_EXT	    0x50
 #define MI_EXT	    0x60
+#define DISPLAYID_EXT 0x70
 
 struct est_timings {
 	u8 t1;
@@ -207,6 +209,61 @@ struct detailed_timing {
 #define DRM_EDID_HDMI_DC_30               (1 << 4)
 #define DRM_EDID_HDMI_DC_Y444             (1 << 3)
 
+/* ELD Header Block */
+#define DRM_ELD_HEADER_BLOCK_SIZE	4
+
+#define DRM_ELD_VER			0
+# define DRM_ELD_VER_SHIFT		3
+# define DRM_ELD_VER_MASK		(0x1f << 3)
+
+#define DRM_ELD_BASELINE_ELD_LEN	2	/* in dwords! */
+
+/* ELD Baseline Block for ELD_Ver == 2 */
+#define DRM_ELD_CEA_EDID_VER_MNL	4
+# define DRM_ELD_CEA_EDID_VER_SHIFT	5
+# define DRM_ELD_CEA_EDID_VER_MASK	(7 << 5)
+# define DRM_ELD_CEA_EDID_VER_NONE	(0 << 5)
+# define DRM_ELD_CEA_EDID_VER_CEA861	(1 << 5)
+# define DRM_ELD_CEA_EDID_VER_CEA861A	(2 << 5)
+# define DRM_ELD_CEA_EDID_VER_CEA861BCD	(3 << 5)
+# define DRM_ELD_MNL_SHIFT		0
+# define DRM_ELD_MNL_MASK		(0x1f << 0)
+
+#define DRM_ELD_SAD_COUNT_CONN_TYPE	5
+# define DRM_ELD_SAD_COUNT_SHIFT	4
+# define DRM_ELD_SAD_COUNT_MASK		(0xf << 4)
+# define DRM_ELD_CONN_TYPE_SHIFT	2
+# define DRM_ELD_CONN_TYPE_MASK		(3 << 2)
+# define DRM_ELD_CONN_TYPE_HDMI		(0 << 2)
+# define DRM_ELD_CONN_TYPE_DP		(1 << 2)
+# define DRM_ELD_SUPPORTS_AI		(1 << 1)
+# define DRM_ELD_SUPPORTS_HDCP		(1 << 0)
+
+#define DRM_ELD_AUD_SYNCH_DELAY		6	/* in units of 2 ms */
+# define DRM_ELD_AUD_SYNCH_DELAY_MAX	0xfa	/* 500 ms */
+
+#define DRM_ELD_SPEAKER			7
+# define DRM_ELD_SPEAKER_RLRC		(1 << 6)
+# define DRM_ELD_SPEAKER_FLRC		(1 << 5)
+# define DRM_ELD_SPEAKER_RC		(1 << 4)
+# define DRM_ELD_SPEAKER_RLR		(1 << 3)
+# define DRM_ELD_SPEAKER_FC		(1 << 2)
+# define DRM_ELD_SPEAKER_LFE		(1 << 1)
+# define DRM_ELD_SPEAKER_FLR		(1 << 0)
+
+#define DRM_ELD_PORT_ID			8	/* offsets 8..15 inclusive */
+# define DRM_ELD_PORT_ID_LEN		8
+
+#define DRM_ELD_MANUFACTURER_NAME0	16
+#define DRM_ELD_MANUFACTURER_NAME1	17
+
+#define DRM_ELD_PRODUCT_CODE0		18
+#define DRM_ELD_PRODUCT_CODE1		19
+
+#define DRM_ELD_MONITOR_NAME_STRING	20	/* offsets 20..(20+mnl-1) inclusive */
+
+#define DRM_ELD_CEA_SAD(mnl, sad)	(20 + (mnl) + 3 * (sad))
+
 struct edid {
 	u8 header[8];
 	/* Vendor & product info */
@@ -279,4 +336,56 @@ int
 drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
 					    const struct drm_display_mode *mode);
 
+/**
+ * drm_eld_mnl - Get ELD monitor name length in bytes.
+ * @eld: pointer to an eld memory structure with mnl set
+ */
+static inline int drm_eld_mnl(const uint8_t *eld)
+{
+	return (eld[DRM_ELD_CEA_EDID_VER_MNL] & DRM_ELD_MNL_MASK) >> DRM_ELD_MNL_SHIFT;
+}
+
+/**
+ * drm_eld_sad_count - Get ELD SAD count.
+ * @eld: pointer to an eld memory structure with sad_count set
+ */
+static inline int drm_eld_sad_count(const uint8_t *eld)
+{
+	return (eld[DRM_ELD_SAD_COUNT_CONN_TYPE] & DRM_ELD_SAD_COUNT_MASK) >>
+		DRM_ELD_SAD_COUNT_SHIFT;
+}
+
+/**
+ * drm_eld_calc_baseline_block_size - Calculate baseline block size in bytes
+ * @eld: pointer to an eld memory structure with mnl and sad_count set
+ *
+ * This is a helper for determining the payload size of the baseline block, in
+ * bytes, for e.g. setting the Baseline_ELD_Len field in the ELD header block.
+ */
+static inline int drm_eld_calc_baseline_block_size(const uint8_t *eld)
+{
+	return DRM_ELD_MONITOR_NAME_STRING - DRM_ELD_HEADER_BLOCK_SIZE +
+		drm_eld_mnl(eld) + drm_eld_sad_count(eld) * 3;
+}
+
+/**
+ * drm_eld_size - Get ELD size in bytes
+ * @eld: pointer to a complete eld memory structure
+ *
+ * The returned value does not include the vendor block. It's vendor specific,
+ * and comprises of the remaining bytes in the ELD memory buffer after
+ * drm_eld_size() bytes of header and baseline block.
+ *
+ * The returned value is guaranteed to be a multiple of 4.
+ */
+static inline int drm_eld_size(const uint8_t *eld)
+{
+	return DRM_ELD_HEADER_BLOCK_SIZE + eld[DRM_ELD_BASELINE_ELD_LEN] * 4;
+}
+
+struct edid *drm_do_get_edid(struct drm_connector *connector,
+	int (*get_edid_block)(void *data, u8 *buf, unsigned int block,
+			      size_t len),
+	void *data);
+
 #endif /* __DRM_EDID_H__ */
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index f4ad254e3488..b597068103aa 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -34,9 +34,14 @@ struct drm_fb_helper;
 
 #include <linux/kgdb.h>
 
+struct drm_fb_offset {
+	int x, y;
+};
+
 struct drm_fb_helper_crtc {
 	struct drm_mode_set mode_set;
 	struct drm_display_mode *desired_mode;
+	int x, y;
 };
 
 struct drm_fb_helper_surface_size {
@@ -72,6 +77,7 @@ struct drm_fb_helper_funcs {
 	bool (*initial_config)(struct drm_fb_helper *fb_helper,
 			       struct drm_fb_helper_crtc **crtcs,
 			       struct drm_display_mode **modes,
+			       struct drm_fb_offset *offsets,
 			       bool *enabled, int width, int height);
 };
 
diff --git a/include/drm/drm_flip_work.h b/include/drm/drm_flip_work.h
index 9eed34dcd6af..d387cf06ae05 100644
--- a/include/drm/drm_flip_work.h
+++ b/include/drm/drm_flip_work.h
@@ -25,6 +25,7 @@
 #define DRM_FLIP_WORK_H
 
 #include <linux/kfifo.h>
+#include <linux/spinlock.h>
 #include <linux/workqueue.h>
 
 /**
@@ -32,9 +33,9 @@
  *
  * Util to queue up work to run from work-queue context after flip/vblank.
  * Typically this can be used to defer unref of framebuffer's, cursor
- * bo's, etc until after vblank.  The APIs are all safe (and lockless)
- * for up to one producer and once consumer at a time.  The single-consumer
- * aspect is ensured by committing the queued work to a single work-queue.
+ * bo's, etc until after vblank.  The APIs are all thread-safe.
+ * Moreover, drm_flip_work_queue_task and drm_flip_work_queue can be called
+ * in atomic context.
  */
 
 struct drm_flip_work;
@@ -51,26 +52,40 @@ struct drm_flip_work;
 typedef void (*drm_flip_func_t)(struct drm_flip_work *work, void *val);
 
 /**
+ * struct drm_flip_task - flip work task
+ * @node: list entry element
+ * @data: data to pass to work->func
+ */
+struct drm_flip_task {
+	struct list_head node;
+	void *data;
+};
+
+/**
  * struct drm_flip_work - flip work queue
  * @name: debug name
- * @pending: number of queued but not committed items
- * @count: number of committed items
  * @func: callback fxn called for each committed item
  * @worker: worker which calls @func
- * @fifo: queue of committed items
+ * @queued: queued tasks
+ * @commited: commited tasks
+ * @lock: lock to access queued and commited lists
  */
 struct drm_flip_work {
 	const char *name;
-	atomic_t pending, count;
 	drm_flip_func_t func;
 	struct work_struct worker;
-	DECLARE_KFIFO_PTR(fifo, void *);
+	struct list_head queued;
+	struct list_head commited;
+	spinlock_t lock;
 };
 
+struct drm_flip_task *drm_flip_work_allocate_task(void *data, gfp_t flags);
+void drm_flip_work_queue_task(struct drm_flip_work *work,
+			      struct drm_flip_task *task);
 void drm_flip_work_queue(struct drm_flip_work *work, void *val);
 void drm_flip_work_commit(struct drm_flip_work *work,
 		struct workqueue_struct *wq);
-int drm_flip_work_init(struct drm_flip_work *work, int size,
+void drm_flip_work_init(struct drm_flip_work *work,
 		const char *name, drm_flip_func_t func);
 void drm_flip_work_cleanup(struct drm_flip_work *work);
 
diff --git a/include/drm/drm_gem.h b/include/drm/drm_gem.h
index 1e6ae1458f7a..780511a459c0 100644
--- a/include/drm/drm_gem.h
+++ b/include/drm/drm_gem.h
@@ -119,6 +119,13 @@ struct drm_gem_object {
 	 * simply leave it as NULL.
 	 */
 	struct dma_buf_attachment *import_attach;
+
+	/**
+	 * dumb - created as dumb buffer
+	 * Whether the gem object was created using the dumb buffer interface
+	 * as such it may not be used for GPU rendering.
+	 */
+	bool dumb;
 };
 
 void drm_gem_object_release(struct drm_gem_object *obj);
diff --git a/include/drm/drm_gem_cma_helper.h b/include/drm/drm_gem_cma_helper.h
index 2ff35f3de9c5..acd6af8a8e67 100644
--- a/include/drm/drm_gem_cma_helper.h
+++ b/include/drm/drm_gem_cma_helper.h
@@ -4,6 +4,13 @@
 #include <drm/drmP.h>
 #include <drm/drm_gem.h>
 
+/**
+ * struct drm_gem_cma_object - GEM object backed by CMA memory allocations
+ * @base: base GEM object
+ * @paddr: physical address of the backing memory
+ * @sgt: scatter/gather table for imported PRIME buffers
+ * @vaddr: kernel virtual address of the backing memory
+ */
 struct drm_gem_cma_object {
 	struct drm_gem_object base;
 	dma_addr_t paddr;
@@ -19,23 +26,30 @@ to_drm_gem_cma_obj(struct drm_gem_object *gem_obj)
 	return container_of(gem_obj, struct drm_gem_cma_object, base);
 }
 
-/* free gem object. */
+/* free GEM object */
 void drm_gem_cma_free_object(struct drm_gem_object *gem_obj);
 
-/* create memory region for drm framebuffer. */
+/* create memory region for DRM framebuffer */
+int drm_gem_cma_dumb_create_internal(struct drm_file *file_priv,
+				     struct drm_device *drm,
+				     struct drm_mode_create_dumb *args);
+
+/* create memory region for DRM framebuffer */
 int drm_gem_cma_dumb_create(struct drm_file *file_priv,
-		struct drm_device *drm, struct drm_mode_create_dumb *args);
+			    struct drm_device *drm,
+			    struct drm_mode_create_dumb *args);
 
-/* map memory region for drm framebuffer to user space. */
+/* map memory region for DRM framebuffer to user space */
 int drm_gem_cma_dumb_map_offset(struct drm_file *file_priv,
-		struct drm_device *drm, uint32_t handle, uint64_t *offset);
+				struct drm_device *drm, u32 handle,
+				u64 *offset);
 
-/* set vm_flags and we can change the vm attribute to other one at here. */
+/* set vm_flags and we can change the VM attribute to other one at here */
 int drm_gem_cma_mmap(struct file *filp, struct vm_area_struct *vma);
 
-/* allocate physical memory. */
+/* allocate physical memory */
 struct drm_gem_cma_object *drm_gem_cma_create(struct drm_device *drm,
-		unsigned int size);
+					      size_t size);
 
 extern const struct vm_operations_struct drm_gem_cma_vm_ops;
 
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index 8569dc5a1026..f1d8d0dbb4f1 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -26,6 +26,7 @@ struct mipi_dsi_device;
  * struct mipi_dsi_msg - read/write DSI buffer
  * @channel: virtual channel id
  * @type: payload data type
+ * @flags: flags controlling this message transmission
  * @tx_len: length of @tx_buf
  * @tx_buf: data to be written
  * @rx_len: length of @rx_buf
@@ -43,12 +44,44 @@ struct mipi_dsi_msg {
 	void *rx_buf;
 };
 
+bool mipi_dsi_packet_format_is_short(u8 type);
+bool mipi_dsi_packet_format_is_long(u8 type);
+
+/**
+ * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
+ * @size: size (in bytes) of the packet
+ * @header: the four bytes that make up the header (Data ID, Word Count or
+ *     Packet Data, and ECC)
+ * @payload_length: number of bytes in the payload
+ * @payload: a pointer to a buffer containing the payload, if any
+ */
+struct mipi_dsi_packet {
+	size_t size;
+	u8 header[4];
+	size_t payload_length;
+	const u8 *payload;
+};
+
+int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
+			   const struct mipi_dsi_msg *msg);
+
 /**
  * struct mipi_dsi_host_ops - DSI bus operations
  * @attach: attach DSI device to DSI host
  * @detach: detach DSI device from DSI host
- * @transfer: send and/or receive DSI packet, return number of received bytes,
- * 	      or error
+ * @transfer: transmit a DSI packet
+ *
+ * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg
+ * structures. This structure contains information about the type of packet
+ * being transmitted as well as the transmit and receive buffers. When an
+ * error is encountered during transmission, this function will return a
+ * negative error code. On success it shall return the number of bytes
+ * transmitted for write packets or the number of bytes received for read
+ * packets.
+ *
+ * Note that typically DSI packet transmission is atomic, so the .transfer()
+ * function will seldomly return anything other than the number of bytes
+ * contained in the transmit buffer on success.
  */
 struct mipi_dsi_host_ops {
 	int (*attach)(struct mipi_dsi_host *host,
@@ -56,7 +89,7 @@ struct mipi_dsi_host_ops {
 	int (*detach)(struct mipi_dsi_host *host,
 		      struct mipi_dsi_device *dsi);
 	ssize_t (*transfer)(struct mipi_dsi_host *host,
-			    struct mipi_dsi_msg *msg);
+			    const struct mipi_dsi_msg *msg);
 };
 
 /**
@@ -130,12 +163,57 @@ static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev)
 	return container_of(dev, struct mipi_dsi_device, dev);
 }
 
+struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np);
 int mipi_dsi_attach(struct mipi_dsi_device *dsi);
 int mipi_dsi_detach(struct mipi_dsi_device *dsi);
-ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, const void *data,
-			    size_t len);
+int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
+					    u16 value);
+
+ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
+			       size_t size);
+ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
+			      size_t num_params, void *data, size_t size);
+
+/**
+ * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
+ * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
+ *    information only
+ * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both
+ *    V-Blanking and H-Blanking information
+ */
+enum mipi_dsi_dcs_tear_mode {
+	MIPI_DSI_DCS_TEAR_MODE_VBLANK,
+	MIPI_DSI_DCS_TEAR_MODE_VHBLANK,
+};
+
+#define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2)
+#define MIPI_DSI_DCS_POWER_MODE_NORMAL  (1 << 3)
+#define MIPI_DSI_DCS_POWER_MODE_SLEEP   (1 << 4)
+#define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5)
+#define MIPI_DSI_DCS_POWER_MODE_IDLE    (1 << 6)
+
+ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
+				  const void *data, size_t len);
+ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
+			   const void *data, size_t len);
 ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
 			  size_t len);
+int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode);
+int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format);
+int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
+				    u16 end);
+int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
+				  u16 end);
+int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
+			     enum mipi_dsi_dcs_tear_mode mode);
+int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
 
 /**
  * struct mipi_dsi_driver - DSI driver
@@ -167,9 +245,13 @@ static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data)
 	dev_set_drvdata(&dsi->dev, data);
 }
 
-int mipi_dsi_driver_register(struct mipi_dsi_driver *driver);
+int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver,
+				  struct module *owner);
 void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver);
 
+#define mipi_dsi_driver_register(driver) \
+	mipi_dsi_driver_register_full(driver, THIS_MODULE)
+
 #define module_mipi_dsi_driver(__mipi_dsi_driver) \
 	module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \
 			mipi_dsi_driver_unregister)
diff --git a/include/drm/drm_modeset_lock.h b/include/drm/drm_modeset_lock.h
index 75a5c45e21c7..70595ff565ba 100644
--- a/include/drm/drm_modeset_lock.h
+++ b/include/drm/drm_modeset_lock.h
@@ -33,6 +33,7 @@ struct drm_modeset_lock;
  * @ww_ctx: base acquire ctx
  * @contended: used internally for -EDEADLK handling
  * @locked: list of held locks
+ * @trylock_only: trylock mode used in atomic contexts/panic notifiers
  *
  * Each thread competing for a set of locks must use one acquire
  * ctx.  And if any lock fxn returns -EDEADLK, it must backoff and
@@ -126,11 +127,13 @@ void drm_modeset_unlock(struct drm_modeset_lock *lock);
 
 struct drm_device;
 struct drm_crtc;
+struct drm_plane;
 
 void drm_modeset_lock_all(struct drm_device *dev);
 int __drm_modeset_lock_all(struct drm_device *dev, bool trylock);
 void drm_modeset_unlock_all(struct drm_device *dev);
-void drm_modeset_lock_crtc(struct drm_crtc *crtc);
+void drm_modeset_lock_crtc(struct drm_crtc *crtc,
+			   struct drm_plane *plane);
 void drm_modeset_unlock_crtc(struct drm_crtc *crtc);
 void drm_warn_on_modeset_not_all_locked(struct drm_device *dev);
 struct drm_modeset_acquire_ctx *
diff --git a/include/drm/drm_plane_helper.h b/include/drm/drm_plane_helper.h
index 52e6870534b2..a185392cafeb 100644
--- a/include/drm/drm_plane_helper.h
+++ b/include/drm/drm_plane_helper.h
@@ -25,6 +25,7 @@
 #define DRM_PLANE_HELPER_H
 
 #include <drm/drm_rect.h>
+#include <drm/drm_crtc.h>
 
 /*
  * Drivers that don't allow primary plane scaling may pass this macro in place
@@ -42,6 +43,37 @@
  * planes.
  */
 
+extern int drm_crtc_init(struct drm_device *dev,
+			 struct drm_crtc *crtc,
+			 const struct drm_crtc_funcs *funcs);
+
+/**
+ * drm_plane_helper_funcs - helper operations for CRTCs
+ * @prepare_fb: prepare a framebuffer for use by the plane
+ * @cleanup_fb: cleanup a framebuffer when it's no longer used by the plane
+ * @atomic_check: check that a given atomic state is valid and can be applied
+ * @atomic_update: apply an atomic state to the plane
+ *
+ * The helper operations are called by the mid-layer CRTC helper.
+ */
+struct drm_plane_helper_funcs {
+	int (*prepare_fb)(struct drm_plane *plane,
+			  struct drm_framebuffer *fb);
+	void (*cleanup_fb)(struct drm_plane *plane,
+			   struct drm_framebuffer *fb);
+
+	int (*atomic_check)(struct drm_plane *plane,
+			    struct drm_plane_state *state);
+	void (*atomic_update)(struct drm_plane *plane,
+			      struct drm_plane_state *old_state);
+};
+
+static inline void drm_plane_helper_add(struct drm_plane *plane,
+					const struct drm_plane_helper_funcs *funcs)
+{
+	plane->helper_private = (void *)funcs;
+}
+
 extern int drm_plane_helper_check_update(struct drm_plane *plane,
 					 struct drm_crtc *crtc,
 					 struct drm_framebuffer *fb,
@@ -68,4 +100,16 @@ extern struct drm_plane *drm_primary_helper_create_plane(struct drm_device *dev,
 							 int num_formats);
 
 
+int drm_plane_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
+			    struct drm_framebuffer *fb,
+			    int crtc_x, int crtc_y,
+			    unsigned int crtc_w, unsigned int crtc_h,
+			    uint32_t src_x, uint32_t src_y,
+			    uint32_t src_w, uint32_t src_h);
+int drm_plane_helper_disable(struct drm_plane *plane);
+
+/* For use by drm_crtc_helper.c */
+int drm_plane_helper_commit(struct drm_plane *plane,
+			    struct drm_plane_state *plane_state,
+			    struct drm_framebuffer *old_fb);
 #endif
diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h
index a70d45647898..180ad0e6de21 100644
--- a/include/drm/i915_pciids.h
+++ b/include/drm/i915_pciids.h
@@ -259,4 +259,21 @@
 	INTEL_VGA_DEVICE(0x22b2, info), \
 	INTEL_VGA_DEVICE(0x22b3, info)
 
+#define INTEL_SKL_IDS(info) \
+	INTEL_VGA_DEVICE(0x1916, info), /* ULT GT2 */ \
+	INTEL_VGA_DEVICE(0x1906, info), /* ULT GT1 */ \
+	INTEL_VGA_DEVICE(0x1926, info), /* ULT GT3 */ \
+	INTEL_VGA_DEVICE(0x1921, info), /* ULT GT2F */ \
+	INTEL_VGA_DEVICE(0x190E, info), /* ULX GT1 */ \
+	INTEL_VGA_DEVICE(0x191E, info), /* ULX GT2 */ \
+	INTEL_VGA_DEVICE(0x1912, info), /* DT  GT2 */ \
+	INTEL_VGA_DEVICE(0x1902, info), /* DT  GT1 */ \
+	INTEL_VGA_DEVICE(0x191B, info), /* Halo GT2 */ \
+	INTEL_VGA_DEVICE(0x192B, info), /* Halo GT3 */ \
+	INTEL_VGA_DEVICE(0x190B, info), /* Halo GT1 */ \
+	INTEL_VGA_DEVICE(0x191A, info), /* SRV GT2 */ \
+	INTEL_VGA_DEVICE(0x192A, info), /* SRV GT3 */ \
+	INTEL_VGA_DEVICE(0x190A, info), /* SRV GT1 */ \
+	INTEL_VGA_DEVICE(0x191D, info)  /* WKS GT2 */
+
 #endif /* _I915_PCIIDS_H */
diff --git a/include/drm/ttm/ttm_execbuf_util.h b/include/drm/ttm/ttm_execbuf_util.h
index 460441714413..b620c317c772 100644
--- a/include/drm/ttm/ttm_execbuf_util.h
+++ b/include/drm/ttm/ttm_execbuf_util.h
@@ -68,6 +68,7 @@ extern void ttm_eu_backoff_reservation(struct ww_acquire_ctx *ticket,
  *           non-blocking reserves should be tried.
  * @list:    thread private list of ttm_validate_buffer structs.
  * @intr:    should the wait be interruptible
+ * @dups:    [out] optional list of duplicates.
  *
  * Tries to reserve bos pointed to by the list entries for validation.
  * If the function returns 0, all buffers are marked as "unfenced",
@@ -83,6 +84,11 @@ extern void ttm_eu_backoff_reservation(struct ww_acquire_ctx *ticket,
  * calling process receives a signal while waiting. In that case, no
  * buffers on the list will be reserved upon return.
  *
+ * If dups is non NULL all buffers already reserved by the current thread
+ * (e.g. duplicates) are added to this list, otherwise -EALREADY is returned
+ * on the first already reserved buffer and all buffers from the list are
+ * unreserved again.
+ *
  * Buffers reserved by this function should be unreserved by
  * a call to either ttm_eu_backoff_reservation() or
  * ttm_eu_fence_buffer_objects() when command submission is complete or
@@ -90,7 +96,8 @@ extern void ttm_eu_backoff_reservation(struct ww_acquire_ctx *ticket,
  */
 
 extern int ttm_eu_reserve_buffers(struct ww_acquire_ctx *ticket,
-				  struct list_head *list, bool intr);
+				  struct list_head *list, bool intr,
+				  struct list_head *dups);
 
 /**
  * function ttm_eu_fence_buffer_objects.
diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
index 11c0182a153b..cbb5790a35cd 100644
--- a/include/linux/hdmi.h
+++ b/include/linux/hdmi.h
@@ -1,9 +1,24 @@
 /*
  * Copyright (C) 2012 Avionic Design GmbH
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
  */
 
 #ifndef __LINUX_HDMI_H_
diff --git a/include/linux/mmu_notifier.h b/include/linux/mmu_notifier.h
index ab8564b03468..95243d28a0ee 100644
--- a/include/linux/mmu_notifier.h
+++ b/include/linux/mmu_notifier.h
@@ -98,11 +98,11 @@ struct mmu_notifier_ops {
 	/*
 	 * invalidate_range_start() and invalidate_range_end() must be
 	 * paired and are called only when the mmap_sem and/or the
-	 * locks protecting the reverse maps are held. The subsystem
-	 * must guarantee that no additional references are taken to
-	 * the pages in the range established between the call to
-	 * invalidate_range_start() and the matching call to
-	 * invalidate_range_end().
+	 * locks protecting the reverse maps are held. If the subsystem
+	 * can't guarantee that no additional references are taken to
+	 * the pages in the range, it has to implement the
+	 * invalidate_range() notifier to remove any references taken
+	 * after invalidate_range_start().
 	 *
 	 * Invalidation of multiple concurrent ranges may be
 	 * optionally permitted by the driver. Either way the
@@ -144,6 +144,29 @@ struct mmu_notifier_ops {
 	void (*invalidate_range_end)(struct mmu_notifier *mn,
 				     struct mm_struct *mm,
 				     unsigned long start, unsigned long end);
+
+	/*
+	 * invalidate_range() is either called between
+	 * invalidate_range_start() and invalidate_range_end() when the
+	 * VM has to free pages that where unmapped, but before the
+	 * pages are actually freed, or outside of _start()/_end() when
+	 * a (remote) TLB is necessary.
+	 *
+	 * If invalidate_range() is used to manage a non-CPU TLB with
+	 * shared page-tables, it not necessary to implement the
+	 * invalidate_range_start()/end() notifiers, as
+	 * invalidate_range() alread catches the points in time when an
+	 * external TLB range needs to be flushed.
+	 *
+	 * The invalidate_range() function is called under the ptl
+	 * spin-lock and not allowed to sleep.
+	 *
+	 * Note that this function might be called with just a sub-range
+	 * of what was passed to invalidate_range_start()/end(), if
+	 * called between those functions.
+	 */
+	void (*invalidate_range)(struct mmu_notifier *mn, struct mm_struct *mm,
+				 unsigned long start, unsigned long end);
 };
 
 /*
@@ -190,6 +213,8 @@ extern void __mmu_notifier_invalidate_range_start(struct mm_struct *mm,
 				  unsigned long start, unsigned long end);
 extern void __mmu_notifier_invalidate_range_end(struct mm_struct *mm,
 				  unsigned long start, unsigned long end);
+extern void __mmu_notifier_invalidate_range(struct mm_struct *mm,
+				  unsigned long start, unsigned long end);
 
 static inline void mmu_notifier_release(struct mm_struct *mm)
 {
@@ -242,6 +267,13 @@ static inline void mmu_notifier_invalidate_range_end(struct mm_struct *mm,
 		__mmu_notifier_invalidate_range_end(mm, start, end);
 }
 
+static inline void mmu_notifier_invalidate_range(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_invalidate_range(mm, start, end);
+}
+
 static inline void mmu_notifier_mm_init(struct mm_struct *mm)
 {
 	mm->mmu_notifier_mm = NULL;
@@ -279,6 +311,44 @@ static inline void mmu_notifier_mm_destroy(struct mm_struct *mm)
 	__young;							\
 })
 
+#define	ptep_clear_flush_notify(__vma, __address, __ptep)		\
+({									\
+	unsigned long ___addr = __address & PAGE_MASK;			\
+	struct mm_struct *___mm = (__vma)->vm_mm;			\
+	pte_t ___pte;							\
+									\
+	___pte = ptep_clear_flush(__vma, __address, __ptep);		\
+	mmu_notifier_invalidate_range(___mm, ___addr,			\
+					___addr + PAGE_SIZE);		\
+									\
+	___pte;								\
+})
+
+#define pmdp_clear_flush_notify(__vma, __haddr, __pmd)			\
+({									\
+	unsigned long ___haddr = __haddr & HPAGE_PMD_MASK;		\
+	struct mm_struct *___mm = (__vma)->vm_mm;			\
+	pmd_t ___pmd;							\
+									\
+	___pmd = pmdp_clear_flush(__vma, __haddr, __pmd);		\
+	mmu_notifier_invalidate_range(___mm, ___haddr,			\
+				      ___haddr + HPAGE_PMD_SIZE);	\
+									\
+	___pmd;								\
+})
+
+#define pmdp_get_and_clear_notify(__mm, __haddr, __pmd)			\
+({									\
+	unsigned long ___haddr = __haddr & HPAGE_PMD_MASK;		\
+	pmd_t ___pmd;							\
+									\
+	___pmd = pmdp_get_and_clear(__mm, __haddr, __pmd);		\
+	mmu_notifier_invalidate_range(__mm, ___haddr,			\
+				      ___haddr + HPAGE_PMD_SIZE);	\
+									\
+	___pmd;								\
+})
+
 /*
  * set_pte_at_notify() sets the pte _after_ running the notifier.
  * This is safe to start by updating the secondary MMUs, because the primary MMU
@@ -342,6 +412,11 @@ static inline void mmu_notifier_invalidate_range_end(struct mm_struct *mm,
 {
 }
 
+static inline void mmu_notifier_invalidate_range(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+}
+
 static inline void mmu_notifier_mm_init(struct mm_struct *mm)
 {
 }
@@ -352,6 +427,9 @@ static inline void mmu_notifier_mm_destroy(struct mm_struct *mm)
 
 #define ptep_clear_flush_young_notify ptep_clear_flush_young
 #define pmdp_clear_flush_young_notify pmdp_clear_flush_young
+#define	ptep_clear_flush_notify ptep_clear_flush
+#define pmdp_clear_flush_notify pmdp_clear_flush
+#define pmdp_get_and_clear_notify pmdp_get_and_clear
 #define set_pte_at_notify set_pte_at
 
 #endif /* CONFIG_MMU_NOTIFIER */
diff --git a/include/linux/platform_data/rcar-du.h b/include/linux/platform_data/rcar-du.h
deleted file mode 100644
index a5f045e1d8fe..000000000000
--- a/include/linux/platform_data/rcar-du.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * rcar_du.h  --  R-Car Display Unit DRM driver
- *
- * Copyright (C) 2013 Renesas Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __RCAR_DU_H__
-#define __RCAR_DU_H__
-
-#include <video/videomode.h>
-
-enum rcar_du_output {
-	RCAR_DU_OUTPUT_DPAD0,
-	RCAR_DU_OUTPUT_DPAD1,
-	RCAR_DU_OUTPUT_LVDS0,
-	RCAR_DU_OUTPUT_LVDS1,
-	RCAR_DU_OUTPUT_TCON,
-	RCAR_DU_OUTPUT_MAX,
-};
-
-enum rcar_du_encoder_type {
-	RCAR_DU_ENCODER_UNUSED = 0,
-	RCAR_DU_ENCODER_NONE,
-	RCAR_DU_ENCODER_VGA,
-	RCAR_DU_ENCODER_LVDS,
-};
-
-struct rcar_du_panel_data {
-	unsigned int width_mm;		/* Panel width in mm */
-	unsigned int height_mm;		/* Panel height in mm */
-	struct videomode mode;
-};
-
-struct rcar_du_connector_lvds_data {
-	struct rcar_du_panel_data panel;
-};
-
-struct rcar_du_connector_vga_data {
-	/* TODO: Add DDC information for EDID retrieval */
-};
-
-/*
- * struct rcar_du_encoder_data - Encoder platform data
- * @type: the encoder type (RCAR_DU_ENCODER_*)
- * @output: the DU output the connector is connected to (RCAR_DU_OUTPUT_*)
- * @connector.lvds: platform data for LVDS connectors
- * @connector.vga: platform data for VGA connectors
- *
- * Encoder platform data describes an on-board encoder, its associated DU SoC
- * output, and the connector.
- */
-struct rcar_du_encoder_data {
-	enum rcar_du_encoder_type type;
-	enum rcar_du_output output;
-
-	union {
-		struct rcar_du_connector_lvds_data lvds;
-		struct rcar_du_connector_vga_data vga;
-	} connector;
-};
-
-struct rcar_du_platform_data {
-	struct rcar_du_encoder_data *encoders;
-	unsigned int num_encoders;
-};
-
-#endif /* __RCAR_DU_H__ */
diff --git a/include/trace/events/host1x.h b/include/trace/events/host1x.h
index 94db6a2c3540..63116362543c 100644
--- a/include/trace/events/host1x.h
+++ b/include/trace/events/host1x.h
@@ -29,6 +29,8 @@
 #include <linux/ktime.h>
 #include <linux/tracepoint.h>
 
+struct host1x_bo;
+
 DECLARE_EVENT_CLASS(host1x,
 	TP_PROTO(const char *name),
 	TP_ARGS(name),
@@ -79,14 +81,14 @@ TRACE_EVENT(host1x_cdma_push,
 );
 
 TRACE_EVENT(host1x_cdma_push_gather,
-	TP_PROTO(const char *name, u32 mem_id,
+	TP_PROTO(const char *name, struct host1x_bo *bo,
 			u32 words, u32 offset, void *cmdbuf),
 
-	TP_ARGS(name, mem_id, words, offset, cmdbuf),
+	TP_ARGS(name, bo, words, offset, cmdbuf),
 
 	TP_STRUCT__entry(
 		__field(const char *, name)
-		__field(u32, mem_id)
+		__field(struct host1x_bo *, bo)
 		__field(u32, words)
 		__field(u32, offset)
 		__field(bool, cmdbuf)
@@ -100,13 +102,13 @@ TRACE_EVENT(host1x_cdma_push_gather,
 		}
 		__entry->cmdbuf = cmdbuf;
 		__entry->name = name;
-		__entry->mem_id = mem_id;
+		__entry->bo = bo;
 		__entry->words = words;
 		__entry->offset = offset;
 	),
 
-	TP_printk("name=%s, mem_id=%08x, words=%u, offset=%d, contents=[%s]",
-	  __entry->name, __entry->mem_id,
+	TP_printk("name=%s, bo=%p, words=%u, offset=%d, contents=[%s]",
+	  __entry->name, __entry->bo,
 	  __entry->words, __entry->offset,
 	  __print_hex(__get_dynamic_array(cmdbuf),
 		  __entry->cmdbuf ? __entry->words * 4 : 0))
@@ -221,12 +223,13 @@ TRACE_EVENT(host1x_syncpt_load_min,
 );
 
 TRACE_EVENT(host1x_syncpt_wait_check,
-	TP_PROTO(void *mem_id, u32 offset, u32 syncpt_id, u32 thresh, u32 min),
+	TP_PROTO(struct host1x_bo *bo, u32 offset, u32 syncpt_id, u32 thresh,
+		 u32 min),
 
-	TP_ARGS(mem_id, offset, syncpt_id, thresh, min),
+	TP_ARGS(bo, offset, syncpt_id, thresh, min),
 
 	TP_STRUCT__entry(
-		__field(void *, mem_id)
+		__field(struct host1x_bo *, bo)
 		__field(u32, offset)
 		__field(u32, syncpt_id)
 		__field(u32, thresh)
@@ -234,15 +237,15 @@ TRACE_EVENT(host1x_syncpt_wait_check,
 	),
 
 	TP_fast_assign(
-		__entry->mem_id = mem_id;
+		__entry->bo = bo;
 		__entry->offset = offset;
 		__entry->syncpt_id = syncpt_id;
 		__entry->thresh = thresh;
 		__entry->min = min;
 	),
 
-	TP_printk("mem_id=%p, offset=%05x, id=%d, thresh=%d, current=%d",
-		__entry->mem_id, __entry->offset,
+	TP_printk("bo=%p, offset=%05x, id=%d, thresh=%d, current=%d",
+		__entry->bo, __entry->offset,
 		__entry->syncpt_id, __entry->thresh,
 		__entry->min)
 );
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index a0db2d4aa5f0..86574b0005ff 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -286,6 +286,8 @@ struct drm_mode_get_property {
 	char name[DRM_PROP_NAME_LEN];
 
 	__u32 count_values;
+	/* This is only used to count enum values, not blobs. The _blobs is
+	 * simply because of a historical reason, i.e. backwards compat. */
 	__u32 count_enum_blobs;
 };
 
diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h
index ff57f07c3249..250262265ee3 100644
--- a/include/uapi/drm/i915_drm.h
+++ b/include/uapi/drm/i915_drm.h
@@ -340,6 +340,7 @@ typedef struct drm_i915_irq_wait {
 #define I915_PARAM_HAS_EXEC_HANDLE_LUT   26
 #define I915_PARAM_HAS_WT     	 	 27
 #define I915_PARAM_CMD_PARSER_VERSION	 28
+#define I915_PARAM_HAS_COHERENT_PHYS_GTT 29
 
 typedef struct drm_i915_getparam {
 	int param;
@@ -876,6 +877,12 @@ struct drm_i915_gem_get_tiling {
 	 * mmap mapping.
 	 */
 	__u32 swizzle_mode;
+
+	/**
+	 * Returned address bit 6 swizzling required for CPU access through
+	 * mmap mapping whilst bound.
+	 */
+	__u32 phys_swizzle_mode;
 };
 
 struct drm_i915_gem_get_aperture {
diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h
new file mode 100644
index 000000000000..7acef41fc209
--- /dev/null
+++ b/include/uapi/linux/kfd_ioctl.h
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2014 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef KFD_IOCTL_H_INCLUDED
+#define KFD_IOCTL_H_INCLUDED
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define KFD_IOCTL_MAJOR_VERSION 1
+#define KFD_IOCTL_MINOR_VERSION 0
+
+struct kfd_ioctl_get_version_args {
+	uint32_t major_version;	/* from KFD */
+	uint32_t minor_version;	/* from KFD */
+};
+
+/* For kfd_ioctl_create_queue_args.queue_type. */
+#define KFD_IOC_QUEUE_TYPE_COMPUTE	0
+#define KFD_IOC_QUEUE_TYPE_SDMA		1
+#define KFD_IOC_QUEUE_TYPE_COMPUTE_AQL	2
+
+#define KFD_MAX_QUEUE_PERCENTAGE	100
+#define KFD_MAX_QUEUE_PRIORITY		15
+
+struct kfd_ioctl_create_queue_args {
+	uint64_t ring_base_address;	/* to KFD */
+	uint64_t write_pointer_address;	/* from KFD */
+	uint64_t read_pointer_address;	/* from KFD */
+	uint64_t doorbell_offset;	/* from KFD */
+
+	uint32_t ring_size;		/* to KFD */
+	uint32_t gpu_id;		/* to KFD */
+	uint32_t queue_type;		/* to KFD */
+	uint32_t queue_percentage;	/* to KFD */
+	uint32_t queue_priority;	/* to KFD */
+	uint32_t queue_id;		/* from KFD */
+
+	uint64_t eop_buffer_address;	/* to KFD */
+	uint64_t eop_buffer_size;	/* to KFD */
+	uint64_t ctx_save_restore_address; /* to KFD */
+	uint64_t ctx_save_restore_size;	/* to KFD */
+};
+
+struct kfd_ioctl_destroy_queue_args {
+	uint32_t queue_id;		/* to KFD */
+	uint32_t pad;
+};
+
+struct kfd_ioctl_update_queue_args {
+	uint64_t ring_base_address;	/* to KFD */
+
+	uint32_t queue_id;		/* to KFD */
+	uint32_t ring_size;		/* to KFD */
+	uint32_t queue_percentage;	/* to KFD */
+	uint32_t queue_priority;	/* to KFD */
+};
+
+/* For kfd_ioctl_set_memory_policy_args.default_policy and alternate_policy */
+#define KFD_IOC_CACHE_POLICY_COHERENT 0
+#define KFD_IOC_CACHE_POLICY_NONCOHERENT 1
+
+struct kfd_ioctl_set_memory_policy_args {
+	uint64_t alternate_aperture_base;	/* to KFD */
+	uint64_t alternate_aperture_size;	/* to KFD */
+
+	uint32_t gpu_id;			/* to KFD */
+	uint32_t default_policy;		/* to KFD */
+	uint32_t alternate_policy;		/* to KFD */
+	uint32_t pad;
+};
+
+/*
+ * All counters are monotonic. They are used for profiling of compute jobs.
+ * The profiling is done by userspace.
+ *
+ * In case of GPU reset, the counter should not be affected.
+ */
+
+struct kfd_ioctl_get_clock_counters_args {
+	uint64_t gpu_clock_counter;	/* from KFD */
+	uint64_t cpu_clock_counter;	/* from KFD */
+	uint64_t system_clock_counter;	/* from KFD */
+	uint64_t system_clock_freq;	/* from KFD */
+
+	uint32_t gpu_id;		/* to KFD */
+	uint32_t pad;
+};
+
+#define NUM_OF_SUPPORTED_GPUS 7
+
+struct kfd_process_device_apertures {
+	uint64_t lds_base;		/* from KFD */
+	uint64_t lds_limit;		/* from KFD */
+	uint64_t scratch_base;		/* from KFD */
+	uint64_t scratch_limit;		/* from KFD */
+	uint64_t gpuvm_base;		/* from KFD */
+	uint64_t gpuvm_limit;		/* from KFD */
+	uint32_t gpu_id;		/* from KFD */
+	uint32_t pad;
+};
+
+struct kfd_ioctl_get_process_apertures_args {
+	struct kfd_process_device_apertures
+			process_apertures[NUM_OF_SUPPORTED_GPUS];/* from KFD */
+
+	/* from KFD, should be in the range [1 - NUM_OF_SUPPORTED_GPUS] */
+	uint32_t num_of_nodes;
+	uint32_t pad;
+};
+
+#define KFD_IOC_MAGIC 'K'
+
+#define KFD_IOC_GET_VERSION \
+		_IOR(KFD_IOC_MAGIC, 1, struct kfd_ioctl_get_version_args)
+
+#define KFD_IOC_CREATE_QUEUE \
+		_IOWR(KFD_IOC_MAGIC, 2, struct kfd_ioctl_create_queue_args)
+
+#define KFD_IOC_DESTROY_QUEUE \
+	_IOWR(KFD_IOC_MAGIC, 3, struct kfd_ioctl_destroy_queue_args)
+
+#define KFD_IOC_SET_MEMORY_POLICY \
+	_IOW(KFD_IOC_MAGIC, 4, struct kfd_ioctl_set_memory_policy_args)
+
+#define KFD_IOC_GET_CLOCK_COUNTERS \
+	_IOWR(KFD_IOC_MAGIC, 5, struct kfd_ioctl_get_clock_counters_args)
+
+#define KFD_IOC_GET_PROCESS_APERTURES \
+	_IOR(KFD_IOC_MAGIC, 6, struct kfd_ioctl_get_process_apertures_args)
+
+#define KFD_IOC_UPDATE_QUEUE \
+	_IOW(KFD_IOC_MAGIC, 7, struct kfd_ioctl_update_queue_args)
+
+#endif
author	Linus Torvalds <torvalds@linux-foundation.org>	2014-12-15 15:52:01 -0800
committer	Linus Torvalds <torvalds@linux-foundation.org>	2014-12-15 15:52:01 -0800
commit	988adfdffdd43cfd841df734664727993076d7cb (patch)
tree	6794f7bba8f595500c2b7d33376ad6614adcfaf2 /include
parent	26178ec11ef3c6c814bf16a0a2b9c2f7242e3c64 (diff)
parent	4e0cd68115620bc3236ff4e58e4c073948629b41 (diff)
download	blackbird-op-linux-988adfdffdd43cfd841df734664727993076d7cb.tar.gz blackbird-op-linux-988adfdffdd43cfd841df734664727993076d7cb.zip