NFC: Digital Protocol stack implementation

This is the initial commit of the NFC Digital Protocol stack
implementation.

It offers an interface for devices that don't have an embedded NFC
Digital protocol stack. The driver instantiates the digital stack by
calling nfc_digital_allocate_device(). Within the nfc_digital_ops
structure, the driver specifies a set of function pointers for driver
operations. These functions must be implemented by the driver and are:

in_configure_hw:
Hardware configuration for RF technology and communication framing in
initiator mode. This is a synchronous function.

in_send_cmd:
Initiator mode data exchange using RF technology and framing previously
set with in_configure_hw. The peer response is returned through
callback cb. If an io error occurs or the peer didn't reply within the
specified timeout (ms), the error code is passed back through the resp
pointer. This is an asynchronous function.

tg_configure_hw:
Hardware configuration for RF technology and communication framing in
target mode. This is a synchronous function.

tg_send_cmd:
Target mode data exchange using RF technology and framing previously
set with tg_configure_hw. The peer next command is returned through
callback cb. If an io error occurs or the peer didn't reply within the
specified timeout (ms), the error code is passed back through the resp
pointer. This is an asynchronous function.

tg_listen:
Put the device in listen mode waiting for data from the peer device.
This is an asynchronous function.

tg_listen_mdaa:
If supported, put the device in automatic listen mode with mode
detection and automatic anti-collision. In this mode, the device
automatically detects the RF technology and executes the
anti-collision detection using the command responses specified in
mdaa_params. The mdaa_params structure contains SENS_RES, NFCID1, and
SEL_RES for 106A RF tech. NFCID2 and system code (sc) for 212F and
424F. The driver returns the NFC-DEP ATR_REQ command through cb. The
digital stack deducts the RF tech by analyzing the SoD of the frame
containing the ATR_REQ command. This is an asynchronous function.

switch_rf:
Turns device radio on or off. The stack does not call explicitly
switch_rf to turn the radio on. A call to in|tg_configure_hw must turn
the device radio on.

abort_cmd:
Discard the last sent command.

Then the driver registers itself against the digital stack by using
nfc_digital_register_device() which in turn registers the digital stack
against the NFC core layer. The digital stack implements common NFC
operations like dev_up(), dev_down(), start_poll(), stop_poll(), etc.

This patch is only a skeleton and NFC operations are just stubs.

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 199 insertions, 0 deletions

diff --git a/include/net/nfc/digital.h b/include/net/nfc/digital.h
new file mode 100644
index 000000000000..8e16b6e0265a
--- /dev/null
+++ b/include/net/nfc/digital.h
@@ -0,0 +1,199 @@
+/*
+ * NFC Digital Protocol stack
+ * Copyright (c) 2013, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef __NFC_DIGITAL_H
+#define __NFC_DIGITAL_H
+
+#include <linux/skbuff.h>
+#include <net/nfc/nfc.h>
+
+/**
+ * Configuration types for in_configure_hw and tg_configure_hw.
+ */
+enum {
+	NFC_DIGITAL_CONFIG_RF_TECH = 0,
+	NFC_DIGITAL_CONFIG_FRAMING,
+};
+
+/**
+ * RF technology values passed as param argument to in_configure_hw and
+ * tg_configure_hw for NFC_DIGITAL_CONFIG_RF_TECH configuration type.
+ */
+enum {
+	NFC_DIGITAL_RF_TECH_106A = 0,
+	NFC_DIGITAL_RF_TECH_212F,
+	NFC_DIGITAL_RF_TECH_424F,
+
+	NFC_DIGITAL_RF_TECH_LAST,
+};
+
+/**
+ * Framing configuration passed as param argument to in_configure_hw and
+ * tg_configure_hw for NFC_DIGITAL_CONFIG_FRAMING configuration type.
+ */
+enum {
+	NFC_DIGITAL_FRAMING_NFCA_SHORT = 0,
+	NFC_DIGITAL_FRAMING_NFCA_STANDARD,
+	NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A,
+
+	NFC_DIGITAL_FRAMING_NFCA_T1T,
+	NFC_DIGITAL_FRAMING_NFCA_T2T,
+	NFC_DIGITAL_FRAMING_NFCA_NFC_DEP,
+
+	NFC_DIGITAL_FRAMING_NFCF,
+	NFC_DIGITAL_FRAMING_NFCF_T3T,
+	NFC_DIGITAL_FRAMING_NFCF_NFC_DEP,
+	NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED,
+
+	NFC_DIGITAL_FRAMING_LAST,
+};
+
+#define DIGITAL_MDAA_NFCID1_SIZE 3
+
+struct digital_tg_mdaa_params {
+	u16 sens_res;
+	u8 nfcid1[DIGITAL_MDAA_NFCID1_SIZE];
+	u8 sel_res;
+
+	u8 nfcid2[NFC_NFCID2_MAXSIZE];
+	u16 sc;
+};
+
+struct nfc_digital_dev;
+
+/**
+ * nfc_digital_cmd_complete_t - Definition of command result callback
+ *
+ * @ddev: nfc_digital_device ref
+ * @arg: user data
+ * @resp: response data
+ *
+ * resp pointer can be an error code and will be checked with IS_ERR() macro.
+ * The callback is responsible for freeing resp sk_buff.
+ */
+typedef void (*nfc_digital_cmd_complete_t)(struct nfc_digital_dev *ddev,
+					   void *arg, struct sk_buff *resp);
+
+/**
+ * Device side NFC Digital operations
+ *
+ * Initiator mode:
+ * @in_configure_hw: Hardware configuration for RF technology and communication
+ *	framing in initiator mode. This is a synchronous function.
+ * @in_send_cmd: Initiator mode data exchange using RF technology and framing
+ *	previously set with in_configure_hw. The peer response is returned
+ *	through callback cb. If an io error occurs or the peer didn't reply
+ *	within the specified timeout (ms), the error code is passed back through
+ *	the resp pointer. This is an asynchronous function.
+ *
+ * Target mode: Only NFC-DEP protocol is supported in target mode.
+ * @tg_configure_hw: Hardware configuration for RF technology and communication
+ *	framing in target mode. This is a synchronous function.
+ * @tg_send_cmd: Target mode data exchange using RF technology and framing
+ *	previously set with tg_configure_hw. The peer next command is returned
+ *	through callback cb. If an io error occurs or the peer didn't reply
+ *	within the specified timeout (ms), the error code is passed back through
+ *	the resp pointer. This is an asynchronous function.
+ * @tg_listen: Put the device in listen mode waiting for data from the peer
+ *	device. This is an asynchronous function.
+ * @tg_listen_mdaa: If supported, put the device in automatic listen mode with
+ *	mode detection and automatic anti-collision. In this mode, the device
+ *	automatically detects the RF technology and executes the anti-collision
+ *	detection using the command responses specified in mdaa_params. The
+ *	mdaa_params structure contains SENS_RES, NFCID1, and SEL_RES for 106A RF
+ *	tech. NFCID2 and system code (sc) for 212F and 424F. The driver returns
+ *	the NFC-DEP ATR_REQ command through cb. The digital stack deducts the RF
+ *	tech by analyzing the SoD of the frame containing the ATR_REQ command.
+ *	This is an asynchronous function.
+ *
+ * @switch_rf: Turns device radio on or off. The stack does not call explicitly
+ *	switch_rf to turn the radio on. A call to in|tg_configure_hw must turn
+ *	the device radio on.
+ * @abort_cmd: Discard the last sent command.
+ */
+struct nfc_digital_ops {
+	int (*in_configure_hw)(struct nfc_digital_dev *ddev, int type,
+			       int param);
+	int (*in_send_cmd)(struct nfc_digital_dev *ddev, struct sk_buff *skb,
+			   u16 timeout, nfc_digital_cmd_complete_t cb,
+			   void *arg);
+
+	int (*tg_configure_hw)(struct nfc_digital_dev *ddev, int type,
+			       int param);
+	int (*tg_send_cmd)(struct nfc_digital_dev *ddev, struct sk_buff *skb,
+			   u16 timeout, nfc_digital_cmd_complete_t cb,
+			   void *arg);
+	int (*tg_listen)(struct nfc_digital_dev *ddev, u16 timeout,
+			 nfc_digital_cmd_complete_t cb, void *arg);
+	int (*tg_listen_mdaa)(struct nfc_digital_dev *ddev,
+			      struct digital_tg_mdaa_params *mdaa_params,
+			      u16 timeout, nfc_digital_cmd_complete_t cb,
+			      void *arg);
+
+	int (*switch_rf)(struct nfc_digital_dev *ddev, bool on);
+	void (*abort_cmd)(struct nfc_digital_dev *ddev);
+};
+
+/**
+ * Driver capabilities - bit mask made of the following values
+ *
+ * @NFC_DIGITAL_DRV_CAPS_IN_CRC: The driver handles CRC calculation in initiator
+ *	mode.
+ * @NFC_DIGITAL_DRV_CAPS_TG_CRC: The driver handles CRC calculation in target
+ *	mode.
+ */
+#define NFC_DIGITAL_DRV_CAPS_IN_CRC	0x0001
+#define NFC_DIGITAL_DRV_CAPS_TG_CRC	0x0002
+
+struct nfc_digital_dev {
+	struct nfc_dev *nfc_dev;
+	struct nfc_digital_ops *ops;
+
+	u32 protocols;
+
+	int tx_headroom;
+	int tx_tailroom;
+
+	u32 driver_capabilities;
+	void *driver_data;
+};
+
+struct nfc_digital_dev *nfc_digital_allocate_device(struct nfc_digital_ops *ops,
+						    __u32 supported_protocols,
+						    __u32 driver_capabilities,
+						    int tx_headroom,
+						    int tx_tailroom);
+void nfc_digital_free_device(struct nfc_digital_dev *ndev);
+int nfc_digital_register_device(struct nfc_digital_dev *ndev);
+void nfc_digital_unregister_device(struct nfc_digital_dev *ndev);
+
+static inline void nfc_digital_set_parent_dev(struct nfc_digital_dev *ndev,
+					      struct device *dev)
+{
+	nfc_set_parent_dev(ndev->nfc_dev, dev);
+}
+
+static inline void nfc_digital_set_drvdata(struct nfc_digital_dev *dev,
+					   void *data)
+{
+	dev->driver_data = data;
+}
+
+static inline void *nfc_digital_get_drvdata(struct nfc_digital_dev *dev)
+{
+	return dev->driver_data;
+}
+
+#endif /* __NFC_DIGITAL_H */