Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (68 commits)
  sdio_uart: Fix SDIO break control to now return success or an error
  mmc: host driver for Ricoh Bay1Controllers
  sdio: sdio_io.c Fix sparse warnings
  sdio: fix the use of hard coded timeout value.
  mmc: OLPC: update vdd/powerup quirk comment
  mmc: fix spares errors of sdhci.c
  mmc: remove multiwrite capability
  wbsd: fix bad dma_addr_t conversion
  atmel-mci: Driver for Atmel on-chip MMC controllers
  mmc: fix sdio_io sparse errors
  mmc: wbsd.c fix shadowing of 'dma' variable
  MMC: S3C24XX: Refuse incorrectly aligned transfers
  MMC: S3C24XX: Add maintainer entry
  MMC: S3C24XX: Update error debugging.
  MMC: S3C24XX: Add media presence test to request handling.
  MMC: S3C24XX: Fix use of msecs where jiffies are needed
  MMC: S3C24XX: Add MODULE_ALIAS() entries for the platform devices
  MMC: S3C24XX: Fix s3c2410_dma_request() return code check.
  MMC: S3C24XX: Allow card-detect on non-IRQ capable pin
  MMC: S3C24XX: Ensure host->mrq->data is valid
  ...

Manually fixed up bogus executable bits on drivers/mmc/core/sdio_io.c
and include/linux/mmc/sdio_func.h when merging.

12 files changed, 108 insertions, 29 deletions

diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h
index 1551fc24eb43..400ec10014b4 100644
--- a/include/asm-arm/arch-at91/at91_mci.h
+++ b/include/asm-arm/arch-at91/at91_mci.h
@@ -75,6 +75,10 @@
 #define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
 #define			AT91_MCI_TRTYP_STREAM	(2 << 19)
 
+#define AT91_MCI_BLKR		0x18		/* Block Register */
+#define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
+#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block lenght */
+
 #define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
 #define AT91_MCR_RDR		0x30		/* Receive Data Register */
 #define AT91_MCR_TDR		0x34		/* Transmit Data Register */
diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h
index bb9d30b72952..bfb222fa4abb 100644
--- a/include/asm-arm/arch-s3c2410/regs-sdi.h
+++ b/include/asm-arm/arch-s3c2410/regs-sdi.h
@@ -28,9 +28,15 @@
 #define S3C2410_SDIDCNT               (0x30)
 #define S3C2410_SDIDSTA               (0x34)
 #define S3C2410_SDIFSTA               (0x38)
+
 #define S3C2410_SDIDATA               (0x3C)
 #define S3C2410_SDIIMSK               (0x40)
 
+#define S3C2440_SDIDATA               (0x40)
+#define S3C2440_SDIIMSK               (0x3C)
+
+#define S3C2440_SDICON_SDRESET        (1<<8)
+#define S3C2440_SDICON_MMCCLOCK       (1<<5)
 #define S3C2410_SDICON_BYTEORDER      (1<<4)
 #define S3C2410_SDICON_SDIOIRQ        (1<<3)
 #define S3C2410_SDICON_RWAITEN        (1<<2)
@@ -42,7 +48,8 @@
 #define S3C2410_SDICMDCON_LONGRSP     (1<<10)
 #define S3C2410_SDICMDCON_WAITRSP     (1<<9)
 #define S3C2410_SDICMDCON_CMDSTART    (1<<8)
-#define S3C2410_SDICMDCON_INDEX       (0xff)
+#define S3C2410_SDICMDCON_SENDERHOST  (1<<6)
+#define S3C2410_SDICMDCON_INDEX       (0x3f)
 
 #define S3C2410_SDICMDSTAT_CRCFAIL    (1<<12)
 #define S3C2410_SDICMDSTAT_CMDSENT    (1<<11)
@@ -51,6 +58,9 @@
 #define S3C2410_SDICMDSTAT_XFERING    (1<<8)
 #define S3C2410_SDICMDSTAT_INDEX      (0xff)
 
+#define S3C2440_SDIDCON_DS_BYTE       (0<<22)
+#define S3C2440_SDIDCON_DS_HALFWORD   (1<<22)
+#define S3C2440_SDIDCON_DS_WORD       (2<<22)
 #define S3C2410_SDIDCON_IRQPERIOD     (1<<21)
 #define S3C2410_SDIDCON_TXAFTERRESP   (1<<20)
 #define S3C2410_SDIDCON_RXAFTERCMD    (1<<19)
@@ -59,6 +69,7 @@
 #define S3C2410_SDIDCON_WIDEBUS       (1<<16)
 #define S3C2410_SDIDCON_DMAEN         (1<<15)
 #define S3C2410_SDIDCON_STOP          (1<<14)
+#define S3C2440_SDIDCON_DATSTART      (1<<14)
 #define S3C2410_SDIDCON_DATMODE	      (3<<12)
 #define S3C2410_SDIDCON_BLKNUM        (0x7ff)
 
@@ -68,6 +79,7 @@
 #define S3C2410_SDIDCON_XFER_RXSTART  (2<<12)
 #define S3C2410_SDIDCON_XFER_TXSTART  (3<<12)
 
+#define S3C2410_SDIDCON_BLKNUM_MASK   (0xFFF)
 #define S3C2410_SDIDCNT_BLKNUM_SHIFT  (12)
 
 #define S3C2410_SDIDSTA_RDYWAITREQ    (1<<10)
@@ -82,10 +94,12 @@
 #define S3C2410_SDIDSTA_TXDATAON      (1<<1)
 #define S3C2410_SDIDSTA_RXDATAON      (1<<0)
 
+#define S3C2440_SDIFSTA_FIFORESET      (1<<16)
+#define S3C2440_SDIFSTA_FIFOFAIL       (3<<14)  /* 3 is correct (2 bits) */
 #define S3C2410_SDIFSTA_TFDET          (1<<13)
 #define S3C2410_SDIFSTA_RFDET          (1<<12)
-#define S3C2410_SDIFSTA_TXHALF         (1<<11)
-#define S3C2410_SDIFSTA_TXEMPTY        (1<<10)
+#define S3C2410_SDIFSTA_TFHALF         (1<<11)
+#define S3C2410_SDIFSTA_TFEMPTY        (1<<10)
 #define S3C2410_SDIFSTA_RFLAST         (1<<9)
 #define S3C2410_SDIFSTA_RFFULL         (1<<8)
 #define S3C2410_SDIFSTA_RFHALF         (1<<7)
diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/include/asm-arm/plat-s3c24xx/mci.h
new file mode 100644
index 000000000000..2d0852ac3b27
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/mci.h
@@ -0,0 +1,15 @@
+#ifndef _ARCH_MCI_H
+#define _ARCH_MCI_H
+
+struct s3c24xx_mci_pdata {
+	unsigned int	wprotect_invert : 1;
+	unsigned int	detect_invert : 1;   /* set => detect active high. */
+
+	unsigned int	gpio_detect;
+	unsigned int	gpio_wprotect;
+	unsigned long	ocr_avail;
+	void		(*set_power)(unsigned char power_mode,
+				     unsigned short vdd);
+};
+
+#endif /* _ARCH_NCI_H */
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index b4cddfaca90e..a3783861cdd2 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -77,7 +77,11 @@ struct i2c_board_info;
 struct platform_device *at32_add_device_twi(unsigned int id,
 					    struct i2c_board_info *b,
 					    unsigned int n);
-struct platform_device *at32_add_device_mci(unsigned int id);
+
+struct mci_platform_data;
+struct platform_device *
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
+
 struct platform_device *at32_add_device_ac97c(unsigned int id);
 struct platform_device *at32_add_device_abdac(unsigned int id);
 struct platform_device *at32_add_device_psif(unsigned int id);
diff --git a/include/asm-avr32/atmel-mci.h b/include/asm-avr32/atmel-mci.h
new file mode 100644
index 000000000000..c2ea6e1c9aa1
--- /dev/null
+++ b/include/asm-avr32/atmel-mci.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_AVR32_ATMEL_MCI_H
+#define __ASM_AVR32_ATMEL_MCI_H
+
+struct mci_platform_data {
+	int			detect_pin;
+	int			wp_pin;
+};
+
+#endif /* __ASM_AVR32_ATMEL_MCI_H */
diff --git a/include/asm-mips/mach-au1x00/au1100_mmc.h b/include/asm-mips/mach-au1x00/au1100_mmc.h
index 9e0028f60a43..c35e20918490 100644
--- a/include/asm-mips/mach-au1x00/au1100_mmc.h
+++ b/include/asm-mips/mach-au1x00/au1100_mmc.h
@@ -38,15 +38,15 @@
 #ifndef __ASM_AU1100_MMC_H
 #define __ASM_AU1100_MMC_H
 
-
-#define NUM_AU1100_MMC_CONTROLLERS	2
-
-#if defined(CONFIG_SOC_AU1100)
-#define AU1100_SD_IRQ	AU1100_SD_INT
-#elif defined(CONFIG_SOC_AU1200)
-#define AU1100_SD_IRQ	AU1200_SD_INT
-#endif
-
+#include <linux/leds.h>
+
+struct au1xmmc_platform_data {
+	int(*cd_setup)(void *mmc_host, int on);
+	int(*card_inserted)(void *mmc_host);
+	int(*card_readonly)(void *mmc_host);
+	void(*set_power)(void *mmc_host, int state);
+	struct led_classdev *led;
+};
 
 #define SD0_BASE	0xB0600000
 #define SD1_BASE	0xB0680000
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index d0c3abed74c2..143cebf0586f 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -135,6 +135,7 @@ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
 	struct mmc_command *, int);
 
 extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
+extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
 
 extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
 extern void mmc_release_host(struct mmc_host *host);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 7ab962fa1d73..10a2080086ca 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -51,8 +51,30 @@ struct mmc_ios {
 
 struct mmc_host_ops {
 	void	(*request)(struct mmc_host *host, struct mmc_request *req);
+	/*
+	 * Avoid calling these three functions too often or in a "fast path",
+	 * since underlaying controller might implement them in an expensive
+	 * and/or slow way.
+	 *
+	 * Also note that these functions might sleep, so don't call them
+	 * in the atomic contexts!
+	 *
+	 * Return values for the get_ro callback should be:
+	 *   0 for a read/write card
+	 *   1 for a read-only card
+	 *   -ENOSYS when not supported (equal to NULL callback)
+	 *   or a negative errno value when something bad happened
+	 *
+	 * Return values for the get_ro callback should be:
+	 *   0 for a absent card
+	 *   1 for a present card
+	 *   -ENOSYS when not supported (equal to NULL callback)
+	 *   or a negative errno value when something bad happened
+	 */
 	void	(*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
 	int	(*get_ro)(struct mmc_host *host);
+	int	(*get_cd)(struct mmc_host *host);
+
 	void	(*enable_sdio_irq)(struct mmc_host *host, int enable);
 };
 
@@ -89,11 +111,11 @@ struct mmc_host {
 	unsigned long		caps;		/* Host capabilities */
 
 #define MMC_CAP_4_BIT_DATA	(1 << 0)	/* Can the host do 4 bit transfers */
-#define MMC_CAP_MULTIWRITE	(1 << 1)	/* Can accurately report bytes sent to card on error */
-#define MMC_CAP_MMC_HIGHSPEED	(1 << 2)	/* Can do MMC high-speed timing */
-#define MMC_CAP_SD_HIGHSPEED	(1 << 3)	/* Can do SD high-speed timing */
-#define MMC_CAP_SDIO_IRQ	(1 << 4)	/* Can signal pending SDIO IRQs */
-#define MMC_CAP_SPI		(1 << 5)	/* Talks only SPI protocols */
+#define MMC_CAP_MMC_HIGHSPEED	(1 << 1)	/* Can do MMC high-speed timing */
+#define MMC_CAP_SD_HIGHSPEED	(1 << 2)	/* Can do SD high-speed timing */
+#define MMC_CAP_SDIO_IRQ	(1 << 3)	/* Can signal pending SDIO IRQs */
+#define MMC_CAP_SPI		(1 << 4)	/* Talks only SPI protocols */
+#define MMC_CAP_NEEDS_POLL	(1 << 5)	/* Needs polling for card-detection */
 
 	/* host specific block data */
 	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 4236fbf0b6fb..14b81f3e5232 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -16,7 +16,6 @@
  * Based strongly on code by:
  *
  * Author: Yong-iL Joh <tolkien@mizi.com>
- * Date  : $Date: 2002/06/18 12:37:30 $
  *
  * Author:  Andrew Christian
  *          15 May 2002
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
index b050f4d7b41f..07bee4a0d457 100644
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -1,7 +1,7 @@
 /*
  *  include/linux/mmc/sdio_func.h
  *
- *  Copyright 2007 Pierre Ossman
+ *  Copyright 2007-2008 Pierre Ossman
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -46,6 +46,8 @@ struct sdio_func {
 	unsigned		max_blksize;	/* maximum block size */
 	unsigned		cur_blksize;	/* current block size */
 
+	unsigned		enable_timeout;	/* max enable timeout in msec */
+
 	unsigned int		state;		/* function state */
 #define SDIO_STATE_PRESENT	(1<<0)		/* present in sysfs */
 
@@ -120,23 +122,22 @@ extern int sdio_set_block_size(struct sdio_func *func, unsigned blksz);
 extern int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler);
 extern int sdio_release_irq(struct sdio_func *func);
 
-extern unsigned char sdio_readb(struct sdio_func *func,
-	unsigned int addr, int *err_ret);
-extern unsigned short sdio_readw(struct sdio_func *func,
-	unsigned int addr, int *err_ret);
-extern unsigned long sdio_readl(struct sdio_func *func,
-	unsigned int addr, int *err_ret);
+extern unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz);
+
+extern u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret);
+extern u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret);
+extern u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret);
 
 extern int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
 	unsigned int addr, int count);
 extern int sdio_readsb(struct sdio_func *func, void *dst,
 	unsigned int addr, int count);
 
-extern void sdio_writeb(struct sdio_func *func, unsigned char b,
+extern void sdio_writeb(struct sdio_func *func, u8 b,
 	unsigned int addr, int *err_ret);
-extern void sdio_writew(struct sdio_func *func, unsigned short b,
+extern void sdio_writew(struct sdio_func *func, u16 b,
 	unsigned int addr, int *err_ret);
-extern void sdio_writel(struct sdio_func *func, unsigned long b,
+extern void sdio_writel(struct sdio_func *func, u32 b,
 	unsigned int addr, int *err_ret);
 
 extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 1cf4084b51e8..6be6a7943d8b 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2190,6 +2190,7 @@
 #define PCI_DEVICE_ID_JMICRON_JMB366	0x2366
 #define PCI_DEVICE_ID_JMICRON_JMB368	0x2368
 #define PCI_DEVICE_ID_JMICRON_JMB38X_SD	0x2381
+#define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382
 #define PCI_DEVICE_ID_JMICRON_JMB38X_MS	0x2383
 
 #define PCI_VENDOR_ID_KORENIX		0x1982
diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h
index d5ca78b93a3b..a3626aedaec9 100644
--- a/include/linux/spi/mmc_spi.h
+++ b/include/linux/spi/mmc_spi.h
@@ -23,6 +23,15 @@ struct mmc_spi_platform_data {
 	/* sense switch on sd cards */
 	int (*get_ro)(struct device *);
 
+	/*
+	 * If board does not use CD interrupts, driver can optimize polling
+	 * using this function.
+	 */
+	int (*get_cd)(struct device *);
+
+	/* Capabilities to pass into mmc core (e.g. MMC_CAP_NEEDS_POLL). */
+	unsigned long caps;
+
 	/* how long to debounce card detect, in msecs */
 	u16 detect_delay;