dmaengine: Driver for the Synopsys DesignWare DMA controller

This adds a driver for the Synopsys DesignWare DMA controller (aka
DMACA on AVR32 systems.) This DMA controller can be found integrated
on the AT32AP7000 chip and is primarily meant for peripheral DMA
transfer, but can also be used for memory-to-memory transfers.

This patch is based on a driver from David Brownell which was based on
an older version of the DMA Engine framework. It also implements the
proposed extensions to the DMA Engine API for slave DMA operations.

The dmatest client shows no problems, but there may still be room for
improvement performance-wise. DMA slave transfer performance is
definitely "good enough"; reading 100 MiB from an SD card running at ~20
MHz yields ~7.2 MiB/s average transfer rate.

Full documentation for this controller can be found in the Synopsys
DW AHB DMAC Databook:

http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf

The controller has lots of implementation options, so it's usually a
good idea to check the data sheet of the chip it's intergrated on as
well. The AT32AP7000 data sheet can be found here:

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682


Changes since v4:
  * Use client_count instead of dma_chan_is_in_use()
  * Add missing include
  * Unmap buffers unless client told us not to

Changes since v3:
  * Update to latest DMA engine and DMA slave APIs
  * Embed the hw descriptor into the sw descriptor
  * Clean up and update MODULE_DESCRIPTION, copyright date, etc.

Changes since v2:
  * Dequeue all pending transfers in terminate_all()
  * Rename dw_dmac.h -> dw_dmac_regs.h
  * Define and use controller-specific dma_slave data
  * Fix up a few outdated comments
  * Define hardware registers as structs (doesn't generate better
    code, unfortunately, but it looks nicer.)
  * Get number of channels from platform_data instead of hardcoding it
    based on CONFIG_WHATEVER_CPU.
  * Give slave clients exclusive access to the channel

Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>,
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

2 files changed, 78 insertions, 0 deletions

diff --git a/include/asm-avr32/arch-at32ap/at32ap700x.h b/include/asm-avr32/arch-at32ap/at32ap700x.h
index 31e48b0e7324..d18a3053be0d 100644
--- a/include/asm-avr32/arch-at32ap/at32ap700x.h
+++ b/include/asm-avr32/arch-at32ap/at32ap700x.h
@@ -30,4 +30,20 @@
 #define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
 #define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
 
+
+/*
+ * DMAC peripheral hardware handshaking interfaces, used with dw_dmac
+ */
+#define DMAC_MCI_RX		0
+#define DMAC_MCI_TX		1
+#define DMAC_DAC_TX		2
+#define DMAC_AC97_A_RX		3
+#define DMAC_AC97_A_TX		4
+#define DMAC_AC97_B_RX		5
+#define DMAC_AC97_B_TX		6
+#define DMAC_DMAREQ_0		7
+#define DMAC_DMAREQ_1		8
+#define DMAC_DMAREQ_2		9
+#define DMAC_DMAREQ_3		10
+
 #endif /* __ASM_ARCH_AT32AP700X_H__ */
diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h
new file mode 100644
index 000000000000..04d217b442bf
--- /dev/null
+++ b/include/linux/dw_dmac.h
@@ -0,0 +1,62 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller (aka DMACA on
+ * AVR32 systems.)
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef DW_DMAC_H
+#define DW_DMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct dw_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ */
+struct dw_dma_platform_data {
+	unsigned int	nr_channels;
+};
+
+/**
+ * struct dw_dma_slave - Controller-specific information about a slave
+ * @slave: Generic information about the slave
+ * @ctl_lo: Platform-specific initializer for the CTL_LO register
+ * @cfg_hi: Platform-specific initializer for the CFG_HI register
+ * @cfg_lo: Platform-specific initializer for the CFG_LO register
+ */
+struct dw_dma_slave {
+	struct dma_slave	slave;
+	u32			cfg_hi;
+	u32			cfg_lo;
+};
+
+/* Platform-configurable bits in CFG_HI */
+#define DWC_CFGH_FCMODE		(1 << 0)
+#define DWC_CFGH_FIFO_MODE	(1 << 1)
+#define DWC_CFGH_PROTCTL(x)	((x) << 2)
+#define DWC_CFGH_SRC_PER(x)	((x) << 7)
+#define DWC_CFGH_DST_PER(x)	((x) << 11)
+
+/* Platform-configurable bits in CFG_LO */
+#define DWC_CFGL_PRIO(x)	((x) << 5)	/* priority */
+#define DWC_CFGL_LOCK_CH_XFER	(0 << 12)	/* scope of LOCK_CH */
+#define DWC_CFGL_LOCK_CH_BLOCK	(1 << 12)
+#define DWC_CFGL_LOCK_CH_XACT	(2 << 12)
+#define DWC_CFGL_LOCK_BUS_XFER	(0 << 14)	/* scope of LOCK_BUS */
+#define DWC_CFGL_LOCK_BUS_BLOCK	(1 << 14)
+#define DWC_CFGL_LOCK_BUS_XACT	(2 << 14)
+#define DWC_CFGL_LOCK_CH	(1 << 15)	/* channel lockout */
+#define DWC_CFGL_LOCK_BUS	(1 << 16)	/* busmaster lockout */
+#define DWC_CFGL_HS_DST_POL	(1 << 18)	/* dst handshake active low */
+#define DWC_CFGL_HS_SRC_POL	(1 << 19)	/* src handshake active low */
+
+static inline struct dw_dma_slave *to_dw_dma_slave(struct dma_slave *slave)
+{
+	return container_of(slave, struct dw_dma_slave, slave);
+}
+
+#endif /* DW_DMAC_H */