[ARM] S3C: Move i2c headers to arch/arm/plat-s3c/include/plat.

Move the i2c headers to arch/arm/plat-s3c/include/plat
ready to clean out the old include directories.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

2 files changed, 0 insertions, 89 deletions

diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h
deleted file mode 100644
index 5106acaa1d0e..000000000000
--- a/include/asm-arm/plat-s3c/iic.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/iic.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - I2C Controller platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
-
-/* Notes:
- *	1) All frequencies are expressed in Hz
- *	2) A value of zero is `do not care`
-*/
-
-struct s3c2410_platform_i2c {
-	int		bus_num;	/* bus number to use */
-	unsigned int	flags;
-	unsigned int	slave_addr;	/* slave address for controller */
-	unsigned long	bus_freq;	/* standard bus frequency */
-	unsigned long	max_freq;	/* max frequency for the bus */
-	unsigned long	min_freq;	/* min frequency for the bus */
-	unsigned int	sda_delay;	/* pclks (s3c2440 only) */
-};
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/include/asm-arm/plat-s3c/regs-iic.h
deleted file mode 100644
index 2f7c17de8ac8..000000000000
--- a/include/asm-arm/plat-s3c/regs-iic.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 I2C Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_IIC_H
-#define __ASM_ARCH_REGS_IIC_H __FILE__
-
-/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
-
-#define S3C2410_IICREG(x) (x)
-
-#define S3C2410_IICCON    S3C2410_IICREG(0x00)
-#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
-#define S3C2410_IICADD    S3C2410_IICREG(0x08)
-#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
-#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
-
-#define S3C2410_IICCON_ACKEN		(1<<7)
-#define S3C2410_IICCON_TXDIV_16		(0<<6)
-#define S3C2410_IICCON_TXDIV_512	(1<<6)
-#define S3C2410_IICCON_IRQEN		(1<<5)
-#define S3C2410_IICCON_IRQPEND		(1<<4)
-#define S3C2410_IICCON_SCALE(x)		((x)&15)
-#define S3C2410_IICCON_SCALEMASK	(0xf)
-
-#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
-#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
-#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
-#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
-#define S3C2410_IICSTAT_MODEMASK	(3<<6)
-
-#define S3C2410_IICSTAT_START		(1<<5)
-#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
-#define S3C2410_IICSTAT_TXRXEN		(1<<4)
-#define S3C2410_IICSTAT_ARBITR		(1<<3)
-#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
-#define S3C2410_IICSTAT_ADDR0		(1<<1)
-#define S3C2410_IICSTAT_LASTBIT		(1<<0)
-
-#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
-#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
-#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
-#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
-#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
-
-#define S3C2410_IICLC_FILTER_ON		(1<<2)
-
-#endif /* __ASM_ARCH_REGS_IIC_H */