Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

3 files changed, 147 insertions, 49 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 3eae46cb1acf..e9abc7b536cd 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -91,9 +91,8 @@ enum ieee80211_band {
  * Channel flags set by the regulatory control code.
  *
  * @IEEE80211_CHAN_DISABLED: This channel is disabled.
- * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
- *	on this channel.
- * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
+ * @IEEE80211_CHAN_NO_IR: do not initiate radiation, this includes
+ * 	sending probe requests or beaconing.
  * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
  * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
  * 	is not permitted.
@@ -113,8 +112,8 @@ enum ieee80211_band {
  */
 enum ieee80211_channel_flags {
 	IEEE80211_CHAN_DISABLED		= 1<<0,
-	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
-	IEEE80211_CHAN_NO_IBSS		= 1<<2,
+	IEEE80211_CHAN_NO_IR		= 1<<1,
+	/* hole at 1<<2 */
 	IEEE80211_CHAN_RADAR		= 1<<3,
 	IEEE80211_CHAN_NO_HT40PLUS	= 1<<4,
 	IEEE80211_CHAN_NO_HT40MINUS	= 1<<5,
@@ -1945,6 +1944,29 @@ struct cfg80211_update_ft_ies_params {
 };
 
 /**
+ * struct cfg80211_mgmt_tx_params - mgmt tx parameters
+ *
+ * This structure provides information needed to transmit a mgmt frame
+ *
+ * @chan: channel to use
+ * @offchan: indicates wether off channel operation is required
+ * @wait: duration for ROC
+ * @buf: buffer to transmit
+ * @len: buffer length
+ * @no_cck: don't use cck rates for this frame
+ * @dont_wait_for_ack: tells the low level not to wait for an ack
+ */
+struct cfg80211_mgmt_tx_params {
+	struct ieee80211_channel *chan;
+	bool offchan;
+	unsigned int wait;
+	const u8 *buf;
+	size_t len;
+	bool no_cck;
+	bool dont_wait_for_ack;
+};
+
+/**
  * struct cfg80211_ops - backend description for wireless configuration
  *
  * This struct is registered by fullmac card drivers and/or wireless stacks
@@ -2342,9 +2364,8 @@ struct cfg80211_ops {
 					    u64 cookie);
 
 	int	(*mgmt_tx)(struct wiphy *wiphy, struct wireless_dev *wdev,
-			  struct ieee80211_channel *chan, bool offchan,
-			  unsigned int wait, const u8 *buf, size_t len,
-			  bool no_cck, bool dont_wait_for_ack, u64 *cookie);
+			   struct cfg80211_mgmt_tx_params *params,
+			   u64 *cookie);
 	int	(*mgmt_tx_cancel_wait)(struct wiphy *wiphy,
 				       struct wireless_dev *wdev,
 				       u64 cookie);
@@ -2438,27 +2459,6 @@ struct cfg80211_ops {
 /**
  * enum wiphy_flags - wiphy capability flags
  *
- * @WIPHY_FLAG_CUSTOM_REGULATORY:  tells us the driver for this device
- * 	has its own custom regulatory domain and cannot identify the
- * 	ISO / IEC 3166 alpha2 it belongs to. When this is enabled
- * 	we will disregard the first regulatory hint (when the
- * 	initiator is %REGDOM_SET_BY_CORE).
- * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will
- *	ignore regulatory domain settings until it gets its own regulatory
- *	domain via its regulatory_hint() unless the regulatory hint is
- *	from a country IE. After its gets its own regulatory domain it will
- *	only allow further regulatory domain settings to further enhance
- *	compliance. For example if channel 13 and 14 are disabled by this
- *	regulatory domain no user regulatory domain can enable these channels
- *	at a later time. This can be used for devices which do not have
- *	calibration information guaranteed for frequencies or settings
- *	outside of its regulatory domain. If used in combination with
- *	WIPHY_FLAG_CUSTOM_REGULATORY the inspected country IE power settings
- *	will be followed.
- * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
- *	that passive scan flags and beaconing flags may not be lifted by
- *	cfg80211 due to regulatory beacon hints. For more information on beacon
- *	hints read the documenation for regulatory_hint_found_beacon()
  * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
  *	wiphy at all
  * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
@@ -2497,9 +2497,9 @@ struct cfg80211_ops {
  *	beaconing mode (AP, IBSS, Mesh, ...).
  */
 enum wiphy_flags {
-	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),
-	WIPHY_FLAG_STRICT_REGULATORY		= BIT(1),
-	WIPHY_FLAG_DISABLE_BEACON_HINTS		= BIT(2),
+	/* use hole at 0 */
+	/* use hole at 1 */
+	/* use hole at 2 */
 	WIPHY_FLAG_NETNS_OK			= BIT(3),
 	WIPHY_FLAG_PS_ON_BY_DEFAULT		= BIT(4),
 	WIPHY_FLAG_4ADDR_AP			= BIT(5),
@@ -2721,6 +2721,8 @@ struct wiphy_coalesce_support {
  * @software_iftypes: bitmask of software interface types, these are not
  *	subject to any restrictions since they are purely managed in SW.
  * @flags: wiphy flags, see &enum wiphy_flags
+ * @regulatory_flags: wiphy regulatory flags, see
+ *	&enum ieee80211_regulatory_flags
  * @features: features advertised to nl80211, see &enum nl80211_feature_flags.
  * @bss_priv_size: each BSS struct has private data allocated with it,
  *	this variable determines its size
@@ -2809,7 +2811,7 @@ struct wiphy {
 
 	u16 max_acl_mac_addrs;
 
-	u32 flags, features;
+	u32 flags, regulatory_flags, features;
 
 	u32 ap_sme_capa;
 
@@ -3472,6 +3474,9 @@ int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
  * custom regulatory domain will be trusted completely and as such previous
  * default channel settings will be disregarded. If no rule is found for a
  * channel on the regulatory domain the channel will be disabled.
+ * Drivers using this for a wiphy should also set the wiphy flag
+ * WIPHY_FLAG_CUSTOM_REGULATORY or cfg80211 will set it for the wiphy
+ * that called this helper.
  */
 void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
 				   const struct ieee80211_regdomain *regd);
@@ -4146,6 +4151,7 @@ void cfg80211_radar_event(struct wiphy *wiphy,
 /**
  * cfg80211_cac_event - Channel availability check (CAC) event
  * @netdev: network device
+ * @chandef: chandef for the current channel
  * @event: type of event
  * @gfp: context flags
  *
@@ -4154,6 +4160,7 @@ void cfg80211_radar_event(struct wiphy *wiphy,
  * also by full-MAC drivers.
  */
 void cfg80211_cac_event(struct net_device *netdev,
+			const struct cfg80211_chan_def *chandef,
 			enum nl80211_radar_event event, gfp_t gfp);
 
 
@@ -4279,7 +4286,8 @@ bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
  * @dev: the device which switched channels
  * @chandef: the new channel definition
  *
- * Acquires wdev_lock, so must only be called from sleepable driver context!
+ * Caller must acquire wdev_lock, therefore must only be called from sleepable
+ * driver context!
  */
 void cfg80211_ch_switch_notify(struct net_device *dev,
 			       struct cfg80211_chan_def *chandef);
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 7ceed99a05bc..3cd408b326de 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -154,12 +154,14 @@ struct ieee80211_low_level_stats {
  * @IEEE80211_CHANCTX_CHANGE_RADAR: radar detection flag changed
  * @IEEE80211_CHANCTX_CHANGE_CHANNEL: switched to another operating channel,
  *	this is used only with channel switching with CSA
+ * @IEEE80211_CHANCTX_CHANGE_MIN_WIDTH: The min required channel width changed
  */
 enum ieee80211_chanctx_change {
 	IEEE80211_CHANCTX_CHANGE_WIDTH		= BIT(0),
 	IEEE80211_CHANCTX_CHANGE_RX_CHAINS	= BIT(1),
 	IEEE80211_CHANCTX_CHANGE_RADAR		= BIT(2),
 	IEEE80211_CHANCTX_CHANGE_CHANNEL	= BIT(3),
+	IEEE80211_CHANCTX_CHANGE_MIN_WIDTH	= BIT(4),
 };
 
 /**
@@ -169,6 +171,7 @@ enum ieee80211_chanctx_change {
  * that contains it is visible in mac80211 only.
  *
  * @def: the channel definition
+ * @min_def: the minimum channel definition currently required.
  * @rx_chains_static: The number of RX chains that must always be
  *	active on the channel to receive MIMO transmissions
  * @rx_chains_dynamic: The number of RX chains that must be enabled
@@ -180,6 +183,7 @@ enum ieee80211_chanctx_change {
  */
 struct ieee80211_chanctx_conf {
 	struct cfg80211_chan_def def;
+	struct cfg80211_chan_def min_def;
 
 	u8 rx_chains_static, rx_chains_dynamic;
 
@@ -1229,6 +1233,36 @@ struct ieee80211_key_conf {
 };
 
 /**
+ * struct ieee80211_cipher_scheme - cipher scheme
+ *
+ * This structure contains a cipher scheme information defining
+ * the secure packet crypto handling.
+ *
+ * @cipher: a cipher suite selector
+ * @iftype: a cipher iftype bit mask indicating an allowed cipher usage
+ * @hdr_len: a length of a security header used the cipher
+ * @pn_len: a length of a packet number in the security header
+ * @pn_off: an offset of pn from the beginning of the security header
+ * @key_idx_off: an offset of key index byte in the security header
+ * @key_idx_mask: a bit mask of key_idx bits
+ * @key_idx_shift: a bit shift needed to get key_idx
+ *     key_idx value calculation:
+ *      (sec_header_base[key_idx_off] & key_idx_mask) >> key_idx_shift
+ * @mic_len: a mic length in bytes
+ */
+struct ieee80211_cipher_scheme {
+	u32 cipher;
+	u16 iftype;
+	u8 hdr_len;
+	u8 pn_len;
+	u8 pn_off;
+	u8 key_idx_off;
+	u8 key_idx_mask;
+	u8 key_idx_shift;
+	u8 mic_len;
+};
+
+/**
  * enum set_key_cmd - key command
  *
  * Used with the set_key() callback in &struct ieee80211_ops, this
@@ -1636,6 +1670,10 @@ enum ieee80211_hw_flags {
  * @uapsd_max_sp_len: maximum number of total buffered frames the WMM AP may
  *	deliver to a WMM STA during any Service Period triggered by the WMM STA.
  *	Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct values.
+ *
+ * @n_cipher_schemes: a size of an array of cipher schemes definitions.
+ * @cipher_schemes: a pointer to an array of cipher scheme definitions
+ *	supported by HW.
  */
 struct ieee80211_hw {
 	struct ieee80211_conf conf;
@@ -1663,6 +1701,8 @@ struct ieee80211_hw {
 	netdev_features_t netdev_features;
 	u8 uapsd_queues;
 	u8 uapsd_max_sp_len;
+	u8 n_cipher_schemes;
+	const struct ieee80211_cipher_scheme *cipher_schemes;
 };
 
 /**
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index f17ed590d64a..c96a0b86f342 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -38,17 +38,17 @@ enum environment_cap {
  *
  * @rcu_head: RCU head struct used to free the request
  * @wiphy_idx: this is set if this request's initiator is
- * 	%REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
- * 	can be used by the wireless core to deal with conflicts
- * 	and potentially inform users of which devices specifically
- * 	cased the conflicts.
+ *	%REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
+ *	can be used by the wireless core to deal with conflicts
+ *	and potentially inform users of which devices specifically
+ *	cased the conflicts.
  * @initiator: indicates who sent this request, could be any of
- * 	of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
+ *	of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
  * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
- * 	regulatory domain. We have a few special codes:
- * 	00 - World regulatory domain
- * 	99 - built by driver but a specific alpha2 cannot be determined
- * 	98 - result of an intersection between two regulatory domains
+ *	regulatory domain. We have a few special codes:
+ *	00 - World regulatory domain
+ *	99 - built by driver but a specific alpha2 cannot be determined
+ *	98 - result of an intersection between two regulatory domains
  *	97 - regulatory domain has not yet been configured
  * @dfs_region: If CRDA responded with a regulatory domain that requires
  *	DFS master operation on a known DFS region (NL80211_DFS_*),
@@ -59,8 +59,8 @@ enum environment_cap {
  *	of hint passed. This could be any of the %NL80211_USER_REG_HINT_*
  *	types.
  * @intersect: indicates whether the wireless core should intersect
- * 	the requested regulatory domain with the presently set regulatory
- * 	domain.
+ *	the requested regulatory domain with the presently set regulatory
+ *	domain.
  * @processed: indicates whether or not this requests has already been
  *	processed. When the last request is processed it means that the
  *	currently regulatory domain set on cfg80211 is updated from
@@ -68,9 +68,9 @@ enum environment_cap {
  *	the last request is not yet processed we must yield until it
  *	is processed before processing any new requests.
  * @country_ie_checksum: checksum of the last processed and accepted
- * 	country IE
+ *	country IE
  * @country_ie_env: lets us know if the AP is telling us we are outdoor,
- * 	indoor, or if it doesn't matter
+ *	indoor, or if it doesn't matter
  * @list: used to insert into the reg_requests_list linked list
  */
 struct regulatory_request {
@@ -79,13 +79,63 @@ struct regulatory_request {
 	enum nl80211_reg_initiator initiator;
 	enum nl80211_user_reg_hint_type user_reg_hint_type;
 	char alpha2[2];
-	u8 dfs_region;
+	enum nl80211_dfs_regions dfs_region;
 	bool intersect;
 	bool processed;
 	enum environment_cap country_ie_env;
 	struct list_head list;
 };
 
+/**
+ * enum ieee80211_regulatory_flags - device regulatory flags
+ *
+ * @REGULATORY_CUSTOM_REG: tells us the driver for this device
+ *	has its own custom regulatory domain and cannot identify the
+ *	ISO / IEC 3166 alpha2 it belongs to. When this is enabled
+ *	we will disregard the first regulatory hint (when the
+ *	initiator is %REGDOM_SET_BY_CORE). Drivers that use
+ *	wiphy_apply_custom_regulatory() should have this flag set
+ *	or the regulatory core will set it for the wiphy.
+ * @REGULATORY_STRICT_REG: tells us that the wiphy for this device
+ *	has regulatory domain that it wishes to be considered as the
+ *	superset for regulatory rules. After this device gets its regulatory
+ *	domain programmed further regulatory hints shall only be considered
+ *	for this device to enhance regulatory compliance, forcing the
+ *	device to only possibly use subsets of the original regulatory
+ *	rules. For example if channel 13 and 14 are disabled by this
+ *	device's regulatory domain no user specified regulatory hint which
+ *	has these channels enabled would enable them for this wiphy,
+ *	the device's original regulatory domain will be trusted as the
+ *	base. You can program the superset of regulatory rules for this
+ *	wiphy with regulatory_hint() for cards programmed with an
+ *	ISO3166-alpha2 country code. wiphys that use regulatory_hint()
+ *	will have their wiphy->regd programmed once the regulatory
+ *	domain is set, and all other regulatory hints will be ignored
+ *	until their own regulatory domain gets programmed.
+ * @REGULATORY_DISABLE_BEACON_HINTS: enable this if your driver needs to
+ *	ensure that passive scan flags and beaconing flags may not be lifted by
+ *	cfg80211 due to regulatory beacon hints. For more information on beacon
+ *	hints read the documenation for regulatory_hint_found_beacon()
+ * @REGULATORY_COUNTRY_IE_FOLLOW_POWER:  for devices that have a preference
+ *	that even though they may have programmed their own custom power
+ *	setting prior to wiphy registration, they want to ensure their channel
+ *	power settings are updated for this connection with the power settings
+ *	derived from the regulatory domain. The regulatory domain used will be
+ *	based on the ISO3166-alpha2 from country IE provided through
+ *	regulatory_hint_country_ie()
+ * @REGULATORY_COUNTRY_IE_IGNORE: for devices that have a preference to ignore
+ * 	all country IE information processed by the regulatory core. This will
+ * 	override %REGULATORY_COUNTRY_IE_FOLLOW_POWER as all country IEs will
+ * 	be ignored.
+ */
+enum ieee80211_regulatory_flags {
+	REGULATORY_CUSTOM_REG			= BIT(0),
+	REGULATORY_STRICT_REG			= BIT(1),
+	REGULATORY_DISABLE_BEACON_HINTS		= BIT(2),
+	REGULATORY_COUNTRY_IE_FOLLOW_POWER	= BIT(3),
+	REGULATORY_COUNTRY_IE_IGNORE		= BIT(4),
+};
+
 struct ieee80211_freq_range {
 	u32 start_freq_khz;
 	u32 end_freq_khz;
@@ -107,7 +157,7 @@ struct ieee80211_regdomain {
 	struct rcu_head rcu_head;
 	u32 n_reg_rules;
 	char alpha2[2];
-	u8 dfs_region;
+	enum nl80211_dfs_regions dfs_region;
 	struct ieee80211_reg_rule reg_rules[];
 };