Merge tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY/serial patches from Greg KH:
 "tty and serial merge for 3.4-rc1

  Here's the big serial and tty merge for the 3.4-rc1 tree.

  There's loads of fixes and reworks in here from Jiri for the tty
  layer, and a number of patches from Alan to help try to wrestle the vt
  layer into a sane model.

  Other than that, lots of driver updates and fixes, and other minor
  stuff, all detailed in the shortlog."

* tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits)
  serial: pxa: add clk_prepare/clk_unprepare calls
  TTY: Wrong unicode value copied in con_set_unimap()
  serial: PL011: clear pending interrupts
  serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset.
  vt: NULL dereference in vt_do_kdsk_ioctl()
  tty: serial: vt8500: fix annotations for probe/remove
  serial: remove back and forth conversions in serial_out_sync
  serial: use serial_port_in/out vs serial_in/out in 8250
  serial: introduce generic port in/out helpers
  serial: reduce number of indirections in 8250 code
  serial: delete useless void casts in 8250.c
  serial: make 8250's serial_in shareable to other drivers.
  serial: delete last unused traces of pausing I/O in 8250
  pch_uart: Add module parameter descriptions
  pch_uart: Use existing default_baud in setup_console
  pch_uart: Add user_uartclk parameter
  pch_uart: Add Fish River Island II uart clock quirks
  pch_uart: Use uartclk instead of base_baud
  mpc5200b/uart: select more tolerant uart prescaler on low baudrates
  tty: moxa: fix bit test in moxa_start()
  ...

11 files changed, 102 insertions, 160 deletions

diff --git a/include/linux/altera_uart.h b/include/linux/altera_uart.h
index a10a90791976..c022c82db7ca 100644
--- a/include/linux/altera_uart.h
+++ b/include/linux/altera_uart.h
@@ -5,8 +5,6 @@
 #ifndef	__ALTUART_H
 #define	__ALTUART_H
 
-#include <linux/init.h>
-
 struct altera_uart_platform_uart {
 	unsigned long mapbase;	/* Physical address base */
 	unsigned int irq;	/* Interrupt vector */
@@ -14,6 +12,4 @@ struct altera_uart_platform_uart {
 	unsigned int bus_shift;	/* Bus shift (address stride) */
 };
 
-int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp);
-
 #endif /* __ALTUART_H */
diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h
index ec2d17bc1f1e..daf4a3a40ee0 100644
--- a/include/linux/kbd_kern.h
+++ b/include/linux/kbd_kern.h
@@ -7,8 +7,6 @@
 
 extern struct tasklet_struct keyboard_tasklet;
 
-extern int shift_state;
-
 extern char *func_table[MAX_NR_FUNC];
 extern char func_buf[];
 extern char *funcbufptr;
@@ -65,8 +63,6 @@ struct kbd_struct {
 #define VC_META		4	/* 0 - meta, 1 - meta=prefix with ESC */
 };
 
-extern struct kbd_struct kbd_table[];
-
 extern int kbd_init(void);
 
 extern unsigned char getledstate(void);
@@ -79,6 +75,7 @@ extern void (*kbd_ledfunc)(unsigned int led);
 extern int set_console(int nr);
 extern void schedule_console_callback(void);
 
+/* FIXME: review locking for vt.c callers */
 static inline void set_leds(void)
 {
 	tasklet_schedule(&keyboard_tasklet);
@@ -142,8 +139,6 @@ static inline void chg_vc_kbd_led(struct kbd_struct * kbd, int flag)
 
 struct console;
 
-int getkeycode(unsigned int scancode);
-int setkeycode(unsigned int scancode, unsigned int keycode);
 void compute_shiftstate(void);
 
 /* defkeymap.c */
diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h
index 33a63f62d57f..86e5214ae735 100644
--- a/include/linux/keyboard.h
+++ b/include/linux/keyboard.h
@@ -24,8 +24,6 @@
 
 #ifdef __KERNEL__
 struct notifier_block;
-extern const int NR_TYPES;
-extern const int max_vals[];
 extern unsigned short *key_maps[MAX_NR_KEYMAPS];
 extern unsigned short plain_map[NR_KEYS];
 
diff --git a/include/linux/platform_data/efm32-uart.h b/include/linux/platform_data/efm32-uart.h
new file mode 100644
index 000000000000..ed0e975b3c54
--- /dev/null
+++ b/include/linux/platform_data/efm32-uart.h
@@ -0,0 +1,18 @@
+/*
+ *
+ *
+ */
+#ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__
+#define __LINUX_PLATFORM_DATA_EFM32_UART_H__
+
+#include <linux/types.h>
+
+/**
+ * struct efm32_uart_pdata
+ * @location: pinmux location for the I/O pins (to be written to the ROUTE
+ * 	register)
+ */
+struct efm32_uart_pdata {
+	u8 location;
+};
+#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ */
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 3d86517fe7d5..441980ecc4e5 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -152,8 +152,8 @@ struct serial_uart_config {
 #define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
 
 #define ASYNC_FLAGS		((1U << (ASYNCB_LAST_USER + 1)) - 1)
-#define ASYNC_USR_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI| \
-		ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY)
+#define ASYNC_USR_MASK		(ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
+		ASYNC_LOW_LATENCY)
 #define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
 #define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
 #define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
diff --git a/include/linux/serialP.h b/include/linux/serialP.h
deleted file mode 100644
index e811a615f696..000000000000
--- a/include/linux/serialP.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Private header file for the (dumb) serial driver
- *
- * Copyright (C) 1997 by Theodore Ts'o.
- * 
- * Redistribution of this file is permitted under the terms of the GNU 
- * Public License (GPL)
- */
-
-#ifndef _LINUX_SERIALP_H
-#define _LINUX_SERIALP_H
-
-/*
- * This is our internal structure for each serial port's state.
- * 
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-#include <linux/termios.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <linux/circ_buf.h>
-#include <linux/wait.h>
-
-struct serial_state {
-	int	magic;
-	int	baud_base;
-	unsigned long	port;
-	int	irq;
-	int	flags;
-	int	hub6;
-	int	type;
-	int	line;
-	int	revision;	/* Chip revision (950) */
-	int	xmit_fifo_size;
-	int	custom_divisor;
-	int	count;
-	u8	*iomem_base;
-	u16	iomem_reg_shift;
-	unsigned short	close_delay;
-	unsigned short	closing_wait; /* time to wait before closing */
-	struct async_icount	icount;	
-	int	io_type;
-	struct async_struct *info;
-	struct pci_dev	*dev;
-};
-
-struct async_struct {
-	int			magic;
-	unsigned long		port;
-	int			hub6;
-	int			flags;
-	int			xmit_fifo_size;
-	struct serial_state	*state;
-	struct tty_struct 	*tty;
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			quot;
-	int			x_char;	/* xon/xoff character */
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2; /* obsolete */
-	int			IER; 	/* Interrupt Enable Register */
-	int			MCR; 	/* Modem control register */
-	int			LCR; 	/* Line control register */
-	int			ACR;	 /* 16950 Additional Control Reg. */
-	unsigned long		event;
-	unsigned long		last_active;
-	int			line;
-	int			blocked_open; /* # of blocked opens */
- 	struct circ_buf		xmit;
- 	spinlock_t		xmit_lock;
-	u8			*iomem_base;
-	u16			iomem_reg_shift;
-	int			io_type;
-	struct work_struct			work;
-	struct tasklet_struct	tlet;
-#ifdef DECLARE_WAITQUEUE
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
-	wait_queue_head_t	delta_msr_wait;
-#else	
-	struct wait_queue	*open_wait;
-	struct wait_queue	*close_wait;
-	struct wait_queue	*delta_msr_wait;
-#endif	
-	struct async_struct	*next_port; /* For the linked list */
-	struct async_struct	*prev_port;
-};
-
-#define CONFIGURED_SERIAL_PORT(info) ((info)->port || ((info)->iomem_base))
-
-#define SERIAL_MAGIC 0x5301
-#define SSTATE_MAGIC 0x5302
-
-/*
- * Events are used to schedule things to happen at timer-interrupt
- * time, instead of at rs interrupt time.
- */
-#define RS_EVENT_WRITE_WAKEUP	0
-
-/*
- * Multiport serial configuration structure --- internal structure
- */
-struct rs_multiport_struct {
-	int		port1;
-	unsigned char	mask1, match1;
-	int		port2;
-	unsigned char	mask2, match2;
-	int		port3;
-	unsigned char	mask3, match3;
-	int		port4;
-	unsigned char	mask4, match4;
-	int		port_monitor;
-};
-
-#if defined(__alpha__) && !defined(CONFIG_PCI)
-/*
- * Digital did something really horribly wrong with the OUT1 and OUT2
- * lines on at least some ALPHA's.  The failure mode is that if either
- * is cleared, the machine locks up with endless interrupts.
- *
- * This is still used by arch/mips/au1000/common/serial.c for some weird
- * reason (mips != alpha!)
- */
-#define ALPHA_KLUDGE_MCR  (UART_MCR_OUT2 | UART_MCR_OUT1)
-#elif defined(CONFIG_SBC8560)
-/*
- * WindRiver did something similarly broken on their SBC8560 board. The
- * UART tristates its IRQ output while OUT2 is clear, but they pulled
- * the interrupt line _up_ instead of down, so if we register the IRQ
- * while the UART is in that state, we die in an IRQ storm. */
-#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
-#else
-#define ALPHA_KLUDGE_MCR 0
-#endif
-
-#endif /* _LINUX_SERIAL_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index c91ace70c21d..f51bf2e70c69 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -210,6 +210,8 @@
 /* Atheros AR933X SoC */
 #define PORT_AR933X	99
 
+/* Energy Micro efm32 SoC */
+#define PORT_EFMUART   100
 
 #ifdef __KERNEL__
 
@@ -381,6 +383,16 @@ struct uart_port {
 	void			*private_data;		/* generic platform data pointer */
 };
 
+static inline int serial_port_in(struct uart_port *up, int offset)
+{
+	return up->serial_in(up, offset);
+}
+
+static inline void serial_port_out(struct uart_port *up, int offset, int value)
+{
+	up->serial_out(up, offset, value);
+}
+
 /*
  * This is the state information which is persistent across opens.
  */
diff --git a/include/linux/sunserialcore.h b/include/linux/sunserialcore.h
new file mode 100644
index 000000000000..68e7430bb0fe
--- /dev/null
+++ b/include/linux/sunserialcore.h
@@ -0,0 +1,33 @@
+/* sunserialcore.h
+ *
+ * Generic SUN serial/kbd/ms layer.  Based entirely
+ * upon drivers/sbus/char/sunserial.h which is:
+ *
+ * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
+ *
+ * Port to new UART layer is:
+ *
+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SERIAL_SUN_H
+#define _SERIAL_SUN_H
+
+/* Serial keyboard defines for L1-A processing... */
+#define SUNKBD_RESET		0xff
+#define SUNKBD_L1		0x01
+#define SUNKBD_UP		0x80
+#define SUNKBD_A		0x4d
+
+extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *);
+extern int suncore_mouse_baud_detection(unsigned char, int);
+
+extern int sunserial_register_minors(struct uart_driver *, int);
+extern void sunserial_unregister_minors(struct uart_driver *, int);
+
+extern int sunserial_console_match(struct console *, struct device_node *,
+				   struct uart_driver *, int, bool);
+extern void sunserial_console_termios(struct console *,
+				      struct device_node *);
+
+#endif /* !(_SERIAL_SUN_H) */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 5dbb3cb05a82..a91ff403b3bf 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -52,6 +52,7 @@
  * hardcoded at present.)
  */
 #define NR_UNIX98_PTY_DEFAULT	4096      /* Default maximum for Unix98 ptys */
+#define NR_UNIX98_PTY_RESERVE	1024	  /* Default reserve for main devpts */
 #define NR_UNIX98_PTY_MAX	(1 << MINORBITS) /* Absolute limit */
 
 /*
@@ -480,10 +481,11 @@ extern void free_tty_struct(struct tty_struct *tty);
 extern void initialize_tty_struct(struct tty_struct *tty,
 		struct tty_driver *driver, int idx);
 extern void deinitialize_tty_struct(struct tty_struct *tty);
-extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
-								int first_ok);
+extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx);
 extern int tty_release(struct inode *inode, struct file *filp);
 extern int tty_init_termios(struct tty_struct *tty);
+extern int tty_standard_install(struct tty_driver *driver,
+		struct tty_struct *tty);
 
 extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty);
 extern struct tty_struct *tty_pair_get_pty(struct tty_struct *tty);
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 5cf685086dd3..6e6dbb7447b6 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -50,6 +50,8 @@
  *	Note that tty_shutdown() is not called if ops->shutdown is defined.
  *	This means one is responsible to take care of calling ops->remove (e.g.
  *	via tty_driver_remove_tty) and releasing tty->termios.
+ *	Note that this hook may be called from *all* the contexts where one
+ *	uses tty refcounting (e.g. tty_port_tty_get).
  *
  *
  * void (*cleanup)(struct tty_struct * tty);
@@ -234,6 +236,7 @@
  *	if provided (otherwise EINVAL will be returned).
  */
 
+#include <linux/export.h>
 #include <linux/fs.h>
 #include <linux/list.h>
 #include <linux/cdev.h>
@@ -298,7 +301,6 @@ struct tty_driver {
 	int	name_base;	/* offset of printed name */
 	int	major;		/* major device number */
 	int	minor_start;	/* start of minor device number */
-	int	minor_num;	/* number of *possible* devices */
 	int	num;		/* number of devices allocated */
 	short	type;		/* type of tty driver */
 	short	subtype;	/* subtype of tty driver */
@@ -324,7 +326,7 @@ struct tty_driver {
 
 extern struct list_head tty_drivers;
 
-extern struct tty_driver *alloc_tty_driver(int lines);
+extern struct tty_driver *__alloc_tty_driver(int lines, struct module *owner);
 extern void put_tty_driver(struct tty_driver *driver);
 extern void tty_set_operations(struct tty_driver *driver,
 			const struct tty_operations *op);
@@ -332,6 +334,8 @@ extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
 
 extern void tty_driver_kref_put(struct tty_driver *driver);
 
+#define alloc_tty_driver(lines) __alloc_tty_driver(lines, THIS_MODULE)
+
 static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
 {
 	kref_get(&d->kref);
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index c2164fad0083..e33d77f15bda 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -167,4 +167,30 @@ extern int unregister_vt_notifier(struct notifier_block *nb);
 
 extern void hide_boot_cursor(bool hide);
 
+/* keyboard  provided interfaces */
+extern int vt_do_diacrit(unsigned int cmd, void __user *up, int eperm);
+extern int vt_do_kdskbmode(int console, unsigned int arg);
+extern int vt_do_kdskbmeta(int console, unsigned int arg);
+extern int vt_do_kbkeycode_ioctl(int cmd, struct kbkeycode __user *user_kbkc,
+								int perm);
+extern int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe,
+					int perm, int console);
+extern int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb,
+                                        int perm);
+extern int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm);
+extern int vt_do_kdgkbmode(int console);
+extern int vt_do_kdgkbmeta(int console);
+extern void vt_reset_unicode(int console);
+extern int vt_get_shift_state(void);
+extern void vt_reset_keyboard(int console);
+extern int vt_get_leds(int console, int flag);
+extern int vt_get_kbd_mode_bit(int console, int bit);
+extern void vt_set_kbd_mode_bit(int console, int bit);
+extern void vt_clr_kbd_mode_bit(int console, int bit);
+extern void vt_set_led_state(int console, int leds);
+extern void vt_set_led_state(int console, int leds);
+extern void vt_kbd_con_start(int console);
+extern void vt_kbd_con_stop(int console);
+
+
 #endif /* _VT_KERN_H */