x86, um: ... and asm-x86 move

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

1 files changed, 0 insertions, 284 deletions

diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h
deleted file mode 100644
index 4f7d878bda18..000000000000
--- a/include/asm-x86/io_32.h
+++ /dev/null
@@ -1,284 +0,0 @@
-#ifndef ASM_X86__IO_32_H
-#define ASM_X86__IO_32_H
-
-#include <linux/string.h>
-#include <linux/compiler.h>
-
-/*
- * This file contains the definitions for the x86 IO instructions
- * inb/inw/inl/outb/outw/outl and the "string versions" of the same
- * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
- * versions of the single-IO instructions (inb_p/inw_p/..).
- *
- * This file is not meant to be obfuscating: it's just complicated
- * to (a) handle it all in a way that makes gcc able to optimize it
- * as well as possible and (b) trying to avoid writing the same thing
- * over and over again with slight variations and possibly making a
- * mistake somewhere.
- */
-
-/*
- * Thanks to James van Artsdalen for a better timing-fix than
- * the two short jumps: using outb's to a nonexistent port seems
- * to guarantee better timings even on fast machines.
- *
- * On the other hand, I'd like to be sure of a non-existent port:
- * I feel a bit unsafe about using 0x80 (should be safe, though)
- *
- *		Linus
- */
-
- /*
-  *  Bit simplified and optimized by Jan Hubicka
-  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
-  *
-  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
-  *  isa_read[wl] and isa_write[wl] fixed
-  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-  */
-
-#define IO_SPACE_LIMIT 0xffff
-
-#define XQUAD_PORTIO_BASE 0xfe400000
-#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
-
-#ifdef __KERNEL__
-
-#include <asm-generic/iomap.h>
-
-#include <linux/vmalloc.h>
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-/**
- *	virt_to_phys	-	map virtual addresses to physical
- *	@address: address to remap
- *
- *	The returned physical address is the physical (CPU) mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses directly mapped or allocated via kmalloc.
- *
- *	This function does not give bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-
-static inline unsigned long virt_to_phys(volatile void *address)
-{
-	return __pa(address);
-}
-
-/**
- *	phys_to_virt	-	map physical address to virtual
- *	@address: address to remap
- *
- *	The returned virtual address is a current CPU mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses that have a kernel mapping
- *
- *	This function does not handle bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-
-static inline void *phys_to_virt(unsigned long address)
-{
-	return __va(address);
-}
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-
-/**
- * ioremap     -   map bus memory into CPU space
- * @offset:    bus address of the memory
- * @size:      size of the resource to map
- *
- * ioremap performs a platform specific sequence of operations to
- * make bus memory CPU accessible via the readb/readw/readl/writeb/
- * writew/writel functions and the other mmio helpers. The returned
- * address is not guaranteed to be usable directly as a virtual
- * address.
- *
- * If the area you are trying to map is a PCI BAR you should have a
- * look at pci_iomap().
- */
-extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
-				unsigned long prot_val);
-
-/*
- * The default ioremap() behavior is non-cached:
- */
-static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
-{
-	return ioremap_nocache(offset, size);
-}
-
-extern void iounmap(volatile void __iomem *addr);
-
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * However PCI ones are not necessarily 1:1 and therefore these interfaces
- * are forbidden in portable PCI drivers.
- *
- * Allow them on x86 for legacy drivers, though.
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-static inline void
-memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
-	memset((void __force *)addr, val, count);
-}
-
-static inline void
-memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
-{
-	__memcpy(dst, (const void __force *)src, count);
-}
-
-static inline void
-memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
-	__memcpy((void __force *)dst, src, count);
-}
-
-/*
- * ISA space is 'always mapped' on a typical x86 system, no need to
- * explicitly ioremap() it. The fact that the ISA IO space is mapped
- * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
- * are physical addresses. The following constant pointer can be
- * used as the IO-area pointer (it can be iounmapped as well, so the
- * analogy with PCI is quite large):
- */
-#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
-
-/*
- *	Cache management
- *
- *	This needed for two cases
- *	1. Out of order aware processors
- *	2. Accidentally out of order processors (PPro errata #51)
- */
-
-#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)
-
-static inline void flush_write_buffers(void)
-{
-	asm volatile("lock; addl $0,0(%%esp)": : :"memory");
-}
-
-#else
-
-#define flush_write_buffers() do { } while (0)
-
-#endif
-
-#endif /* __KERNEL__ */
-
-extern void native_io_delay(void);
-
-extern int io_delay_type;
-extern void io_delay_init(void);
-
-#if defined(CONFIG_PARAVIRT)
-#include <asm/paravirt.h>
-#else
-
-static inline void slow_down_io(void)
-{
-	native_io_delay();
-#ifdef REALLY_SLOW_IO
-	native_io_delay();
-	native_io_delay();
-	native_io_delay();
-#endif
-}
-
-#endif
-
-#define __BUILDIO(bwl, bw, type)				\
-static inline void out##bwl(unsigned type value, int port)	\
-{								\
-	out##bwl##_local(value, port);				\
-}								\
-								\
-static inline unsigned type in##bwl(int port)			\
-{								\
-	return in##bwl##_local(port);				\
-}
-
-#define BUILDIO(bwl, bw, type)						\
-static inline void out##bwl##_local(unsigned type value, int port)	\
-{									\
-	asm volatile("out" #bwl " %" #bw "0, %w1"		\
-		     : : "a"(value), "Nd"(port));			\
-}									\
-									\
-static inline unsigned type in##bwl##_local(int port)			\
-{									\
-	unsigned type value;						\
-	asm volatile("in" #bwl " %w1, %" #bw "0"		\
-		     : "=a"(value) : "Nd"(port));			\
-	return value;							\
-}									\
-									\
-static inline void out##bwl##_local_p(unsigned type value, int port)	\
-{									\
-	out##bwl##_local(value, port);					\
-	slow_down_io();							\
-}									\
-									\
-static inline unsigned type in##bwl##_local_p(int port)			\
-{									\
-	unsigned type value = in##bwl##_local(port);			\
-	slow_down_io();							\
-	return value;							\
-}									\
-									\
-__BUILDIO(bwl, bw, type)						\
-									\
-static inline void out##bwl##_p(unsigned type value, int port)		\
-{									\
-	out##bwl(value, port);						\
-	slow_down_io();							\
-}									\
-									\
-static inline unsigned type in##bwl##_p(int port)			\
-{									\
-	unsigned type value = in##bwl(port);				\
-	slow_down_io();							\
-	return value;							\
-}									\
-									\
-static inline void outs##bwl(int port, const void *addr, unsigned long count) \
-{									\
-	asm volatile("rep; outs" #bwl					\
-		     : "+S"(addr), "+c"(count) : "d"(port));		\
-}									\
-									\
-static inline void ins##bwl(int port, void *addr, unsigned long count)	\
-{									\
-	asm volatile("rep; ins" #bwl					\
-		     : "+D"(addr), "+c"(count) : "d"(port));		\
-}
-
-BUILDIO(b, b, char)
-BUILDIO(w, w, short)
-BUILDIO(l, , int)
-
-#endif /* ASM_X86__IO_32_H */