Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

3 files changed, 302 insertions, 0 deletions

diff --git a/include/asm-sh/se/io.h b/include/asm-sh/se/io.h
new file mode 100644
index 000000000000..9eeb86cd6cef
--- /dev/null
+++ b/include/asm-sh/se/io.h
@@ -0,0 +1,35 @@
+/*
+ * include/asm-sh/io_se.h
+ *
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an Hitachi SolutionEngine
+ */
+
+#ifndef _ASM_SH_IO_SE_H
+#define _ASM_SH_IO_SE_H
+
+extern unsigned char se_inb(unsigned long port);
+extern unsigned short se_inw(unsigned long port);
+extern unsigned int se_inl(unsigned long port);
+
+extern void se_outb(unsigned char value, unsigned long port);
+extern void se_outw(unsigned short value, unsigned long port);
+extern void se_outl(unsigned int value, unsigned long port);
+
+extern unsigned char se_inb_p(unsigned long port);
+extern void se_outb_p(unsigned char value, unsigned long port);
+
+extern void se_insb(unsigned long port, void *addr, unsigned long count);
+extern void se_insw(unsigned long port, void *addr, unsigned long count);
+extern void se_insl(unsigned long port, void *addr, unsigned long count);
+extern void se_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void se_outsw(unsigned long port, const void *addr, unsigned long count);
+extern void se_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned long se_isa_port2addr(unsigned long offset);
+
+#endif /* _ASM_SH_IO_SE_H */
diff --git a/include/asm-sh/se/se.h b/include/asm-sh/se/se.h
new file mode 100644
index 000000000000..791c5da0388a
--- /dev/null
+++ b/include/asm-sh/se/se.h
@@ -0,0 +1,77 @@
+#ifndef __ASM_SH_HITACHI_SE_H
+#define __ASM_SH_HITACHI_SE_H
+
+/*
+ * linux/include/asm-sh/hitachi_se.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0x01000000	/* EPROM */
+#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0x12000000
+#define PA_EXT4_SIZE	0x02000000
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
+
+#define PA_83902	0xb0000000	/* DP83902A */
+#define PA_83902_IF	0xb0040000	/* DP83902A remote io port */
+#define PA_83902_RST	0xb0080000	/* DP83902A reset port */
+
+#define PA_SUPERIO	0xb0400000	/* SMC37C935A super io chip */
+#define PA_DIPSW0	0xb0800000	/* Dip switch 5,6 */
+#define PA_DIPSW1	0xb0800002	/* Dip switch 7,8 */
+#define PA_LED		0xb0c00000	/* LED */
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define PA_BCR		0xb0e00000
+#else
+#define PA_BCR		0xb1400000	/* FPGA */
+#endif
+
+#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA	(PA_BCR + 0)
+#define BCR_ILCRB	(PA_BCR + 2)
+#define BCR_ILCRC	(PA_BCR + 4)
+#define BCR_ILCRD	(PA_BCR + 6)
+#define BCR_ILCRE	(PA_BCR + 8)
+#define BCR_ILCRF	(PA_BCR + 10)
+#define BCR_ILCRG	(PA_BCR + 12)
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define IRQ_STNIC   12
+#else
+#define IRQ_STNIC	10
+#endif
+
+#endif  /* __ASM_SH_HITACHI_SE_H */
diff --git a/include/asm-sh/se/smc37c93x.h b/include/asm-sh/se/smc37c93x.h
new file mode 100644
index 000000000000..585da2a8fc45
--- /dev/null
+++ b/include/asm-sh/se/smc37c93x.h
@@ -0,0 +1,190 @@
+#ifndef __ASM_SH_SMC37C93X_H
+#define __ASM_SH_SMC37C93X_H
+
+/*
+ * linux/include/asm-sh/smc37c93x.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * SMSC 37C93x Super IO Chip support
+ */
+
+/* Default base I/O address */
+#define FDC_PRIMARY_BASE	0x3f0
+#define IDE1_PRIMARY_BASE	0x1f0
+#define IDE1_SECONDARY_BASE	0x170
+#define PARPORT_PRIMARY_BASE	0x378
+#define COM1_PRIMARY_BASE	0x2f8
+#define COM2_PRIMARY_BASE	0x3f8
+#define RTC_PRIMARY_BASE	0x070
+#define KBC_PRIMARY_BASE	0x060
+#define AUXIO_PRIMARY_BASE	0x000	/* XXX */
+
+/* Logical device number */
+#define LDN_FDC			0
+#define LDN_IDE1		1
+#define LDN_IDE2		2
+#define LDN_PARPORT		3
+#define LDN_COM1		4
+#define LDN_COM2		5
+#define LDN_RTC			6
+#define LDN_KBC			7
+#define LDN_AUXIO		8
+
+/* Configuration port and key */
+#define CONFIG_PORT		0x3f0
+#define INDEX_PORT		CONFIG_PORT
+#define DATA_PORT		0x3f1
+#define CONFIG_ENTER		0x55
+#define CONFIG_EXIT		0xaa
+
+/* Configuration index */
+#define CURRENT_LDN_INDEX	0x07
+#define POWER_CONTROL_INDEX	0x22
+#define ACTIVATE_INDEX		0x30
+#define IO_BASE_HI_INDEX	0x60
+#define IO_BASE_LO_INDEX	0x61
+#define IRQ_SELECT_INDEX	0x70
+#define DMA_SELECT_INDEX	0x74
+
+#define GPIO46_INDEX		0xc6
+#define GPIO47_INDEX		0xc7
+
+/* UART stuff. Only for debugging.  */
+/* UART Register */
+
+#define UART_RBR	0x0	/* Receiver Buffer Register (Read Only) */
+#define UART_THR	0x0	/* Transmitter Holding Register (Write Only) */
+#define UART_IER	0x2	/* Interrupt Enable Register */
+#define UART_IIR	0x4	/* Interrupt Ident Register (Read Only) */
+#define UART_FCR	0x4	/* FIFO Control Register (Write Only) */
+#define UART_LCR	0x6	/* Line Control Register */
+#define UART_MCR	0x8	/* MODEM Control Register */
+#define UART_LSR	0xa	/* Line Status Register */
+#define UART_MSR	0xc	/* MODEM Status Register */
+#define UART_SCR	0xe	/* Scratch Register */
+#define UART_DLL	0x0	/* Divisor Latch (LS) */
+#define UART_DLM	0x2	/* Divisor Latch (MS) */
+
+#ifndef __ASSEMBLY__
+typedef struct uart_reg {
+	volatile __u16 rbr;
+	volatile __u16 ier;
+	volatile __u16 iir;
+	volatile __u16 lcr;
+	volatile __u16 mcr;
+	volatile __u16 lsr;
+	volatile __u16 msr;
+	volatile __u16 scr;
+} uart_reg;
+#endif /* ! __ASSEMBLY__ */
+
+/* Alias for Write Only Register */
+
+#define thr	rbr
+#define tcr	iir
+
+/* Alias for Divisor Latch Register */
+
+#define dll	rbr
+#define dlm	ier
+#define fcr	iir
+
+/* Interrupt Enable Register */
+
+#define IER_ERDAI	0x0100	/* Enable Received Data Available Interrupt */
+#define IER_ETHREI	0x0200	/* Enable Transmitter Holding Register Empty Interrupt */
+#define IER_ELSI	0x0400	/* Enable Receiver Line Status Interrupt */
+#define IER_EMSI	0x0800	/* Enable MODEM Status Interrupt */
+
+/* Interrupt Ident Register */
+
+#define IIR_IP		0x0100	/* "0" if Interrupt Pending */
+#define IIR_IIB0	0x0200	/* Interrupt ID Bit 0 */
+#define IIR_IIB1	0x0400	/* Interrupt ID Bit 1 */
+#define IIR_IIB2	0x0800	/* Interrupt ID Bit 2 */
+#define IIR_FIFO	0xc000	/* FIFOs enabled */
+
+/* FIFO Control Register */
+
+#define FCR_FEN		0x0100	/* FIFO enable */
+#define FCR_RFRES	0x0200	/* Receiver FIFO reset */
+#define FCR_TFRES	0x0400	/* Transmitter FIFO reset */
+#define FCR_DMA		0x0800	/* DMA mode select */
+#define FCR_RTL		0x4000	/* Receiver triger (LSB) */
+#define FCR_RTM		0x8000	/* Receiver triger (MSB) */
+
+/* Line Control Register */
+
+#define LCR_WLS0	0x0100	/* Word Length Select Bit 0 */
+#define LCR_WLS1	0x0200	/* Word Length Select Bit 1 */
+#define LCR_STB		0x0400	/* Number of Stop Bits */
+#define LCR_PEN		0x0800	/* Parity Enable */
+#define LCR_EPS		0x1000	/* Even Parity Select */
+#define LCR_SP		0x2000	/* Stick Parity */
+#define LCR_SB		0x4000	/* Set Break */
+#define LCR_DLAB	0x8000	/* Divisor Latch Access Bit */
+
+/* MODEM Control Register */
+
+#define MCR_DTR		0x0100	/* Data Terminal Ready */
+#define MCR_RTS		0x0200	/* Request to Send */
+#define MCR_OUT1	0x0400	/* Out 1 */
+#define MCR_IRQEN	0x0800	/* IRQ Enable */
+#define MCR_LOOP	0x1000	/* Loop */
+
+/* Line Status Register */
+
+#define LSR_DR		0x0100	/* Data Ready */
+#define LSR_OE		0x0200	/* Overrun Error */
+#define LSR_PE		0x0400	/* Parity Error */
+#define LSR_FE		0x0800	/* Framing Error */
+#define LSR_BI		0x1000	/* Break Interrupt */
+#define LSR_THRE	0x2000	/* Transmitter Holding Register Empty */
+#define LSR_TEMT	0x4000	/* Transmitter Empty */
+#define LSR_FIFOE	0x8000	/* Receiver FIFO error */
+
+/* MODEM Status Register */
+
+#define MSR_DCTS	0x0100	/* Delta Clear to Send */
+#define MSR_DDSR	0x0200	/* Delta Data Set Ready */
+#define MSR_TERI	0x0400	/* Trailing Edge Ring Indicator */
+#define MSR_DDCD	0x0800	/* Delta Data Carrier Detect */
+#define MSR_CTS		0x1000	/* Clear to Send */
+#define MSR_DSR		0x2000	/* Data Set Ready */
+#define MSR_RI		0x4000	/* Ring Indicator */
+#define MSR_DCD		0x8000	/* Data Carrier Detect */
+
+/* Baud Rate Divisor */
+
+#define UART_CLK	(1843200)	/* 1.8432 MHz */
+#define UART_BAUD(x)	(UART_CLK / (16 * (x)))
+
+/* RTC register definition */
+#define RTC_SECONDS             0
+#define RTC_SECONDS_ALARM       1
+#define RTC_MINUTES             2
+#define RTC_MINUTES_ALARM       3
+#define RTC_HOURS               4
+#define RTC_HOURS_ALARM         5
+#define RTC_DAY_OF_WEEK         6
+#define RTC_DAY_OF_MONTH        7
+#define RTC_MONTH               8
+#define RTC_YEAR                9
+#define RTC_FREQ_SELECT		10
+# define RTC_UIP 0x80
+# define RTC_DIV_CTL 0x70
+/* This RTC can work under 32.768KHz clock only.  */
+# define RTC_OSC_ENABLE 0x20
+# define RTC_OSC_DISABLE 0x00
+#define RTC_CONTROL     	11
+# define RTC_SET 0x80
+# define RTC_PIE 0x40
+# define RTC_AIE 0x20
+# define RTC_UIE 0x10
+# define RTC_SQWE 0x08
+# define RTC_DM_BINARY 0x04
+# define RTC_24H 0x02
+# define RTC_DST_EN 0x01
+
+#endif  /* __ASM_SH_SMC37C93X_H */