[PATCH] powerpc: Merge cacheflush.h and cache.h

The ppc32 and ppc64 versions of cacheflush.h were almost identical.
The two versions of cache.h are fairly similar, except for a bunch of
register definitions in the ppc32 version which probably belong better
elsewhere.  This patch, therefore, merges both headers.  Notable
points:
	- there are several functions in cacheflush.h which exist only
on ppc32 or only on ppc64.  These are handled by #ifdef for now, but
these should probably be consolidated, along with the actual code
behind them later.
	- Confusingly, both ppc32 and ppc64 have a
flush_dcache_range(), but they're subtly different: it uses dcbf on
ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which
uses dcbf.  These too should be merged and consolidated later.
	- Also flush_dcache_range() was defined in cacheflush.h on
ppc64, and in cache.h on ppc32.  In the merged version it's in
cacheflush.h
	- On ppc32 flush_icache_range() is a normal function from
misc.S.  On ppc64, it was wrapper, testing a feature bit before
calling __flush_icache_range() which does the actual flush.  This
patch takes the ppc64 approach, which amounts to no change on ppc32,
since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean
renaming flush_icache_range() to __flush_icache_range() in
arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S
	- The PReP register info from asm-ppc/cache.h has moved to
arch/ppc/platforms/prep_setup.c
	- The 8xx register info from asm-ppc/cache.h has moved to a
new asm-powerpc/reg_8xx.h, included from reg.h
	- flush_dcache_all() was defined on ppc32 (only), but was
never called (although it was exported).  Thus this patch removes it
from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely.  It's
left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c.

Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP
ARCH=ppc, pmac and CHRP ARCH=powerpc).  Built and booted on POWER5
LPAR (ARCH=powerpc and ARCH=ppc64).

Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc).  Built and
booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64).  Built and booted
on G5 (ARCH=powerpc)

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

4 files changed, 155 insertions, 1 deletions

diff --git a/include/asm-powerpc/cache.h b/include/asm-powerpc/cache.h
new file mode 100644
index 000000000000..26ce502e76e8
--- /dev/null
+++ b/include/asm-powerpc/cache.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_POWERPC_CACHE_H
+#define _ASM_POWERPC_CACHE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+/* bytes per L1 cache line */
+#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
+#define L1_CACHE_SHIFT		4
+#define MAX_COPY_PREFETCH	1
+#elif defined(CONFIG_PPC32)
+#define L1_CACHE_SHIFT		5
+#define MAX_COPY_PREFETCH	4
+#else /* CONFIG_PPC64 */
+#define L1_CACHE_SHIFT		7
+#endif
+
+#define	L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define	SMP_CACHE_BYTES		L1_CACHE_BYTES
+#define L1_CACHE_SHIFT_MAX	7 /* largest L1 which this arch supports */
+
+#if defined(__powerpc64__) && !defined(__ASSEMBLY__)
+struct ppc64_caches {
+	u32	dsize;			/* L1 d-cache size */
+	u32	dline_size;		/* L1 d-cache line size	*/
+	u32	log_dline_size;
+	u32	dlines_per_page;
+	u32	isize;			/* L1 i-cache size */
+	u32	iline_size;		/* L1 i-cache line size	*/
+	u32	log_iline_size;
+	u32	ilines_per_page;
+};
+
+extern struct ppc64_caches ppc64_caches;
+#endif /* __powerpc64__ && ! __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_CACHE_H */
diff --git a/include/asm-powerpc/cacheflush.h b/include/asm-powerpc/cacheflush.h
new file mode 100644
index 000000000000..8a740c88d93d
--- /dev/null
+++ b/include/asm-powerpc/cacheflush.h
@@ -0,0 +1,68 @@
+/*
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_CACHEFLUSH_H
+#define _ASM_POWERPC_CACHEFLUSH_H
+
+#ifdef __KERNEL__
+
+#include <linux/mm.h>
+#include <asm/cputable.h>
+
+/*
+ * No cache flushing is required when address mappings are changed,
+ * because the caches on PowerPCs are physically addressed.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_icache_page(vma, page)		do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+extern void flush_dcache_page(struct page *page);
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+extern void __flush_icache_range(unsigned long, unsigned long);
+static inline void flush_icache_range(unsigned long start, unsigned long stop)
+{
+	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+		__flush_icache_range(start, stop);
+}
+
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+				    struct page *page, unsigned long addr,
+				    int len);
+extern void __flush_dcache_icache(void *page_va);
+extern void flush_dcache_icache_page(struct page *page);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE)
+extern void __flush_dcache_icache_phys(unsigned long physaddr);
+#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */
+
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
+#ifdef CONFIG_PPC32
+extern void clean_dcache_range(unsigned long start, unsigned long stop);
+extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+#endif /* CONFIG_PPC32 */
+#ifdef CONFIG_PPC64
+extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
+extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
+#endif
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do { \
+		memcpy(dst, src, len); \
+		flush_icache_user_range(vma, page, vaddr, len); \
+	} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_CACHEFLUSH_H */
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index 489cf4c99c21..ef121f4f0bab 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -16,7 +16,11 @@
 /* Pickup Book E specific registers. */
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 #include <asm/reg_booke.h>
-#endif
+#endif /* CONFIG_BOOKE || CONFIG_40x */
+
+#ifdef CONFIG_8xx
+#include <asm/reg_8xx.h>
+#endif /* CONFIG_8xx */
 
 #define MSR_SF_LG	63              /* Enable 64 bit mode */
 #define MSR_ISF_LG	61              /* Interrupt 64b mode valid on 630 */
diff --git a/include/asm-powerpc/reg_8xx.h b/include/asm-powerpc/reg_8xx.h
new file mode 100644
index 000000000000..e8ea346b21d3
--- /dev/null
+++ b/include/asm-powerpc/reg_8xx.h
@@ -0,0 +1,42 @@
+/*
+ * Contains register definitions common to PowerPC 8xx CPUs.  Notice
+ */
+#ifndef _ASM_POWERPC_REG_8xx_H
+#define _ASM_POWERPC_REG_8xx_H
+
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define SPRN_IC_CST	560	/* Instruction cache control/status */
+#define SPRN_IC_ADR	561	/* Address needed for some commands */
+#define SPRN_IC_DAT	562	/* Read-only data register */
+#define SPRN_DC_CST	568	/* Data cache control/status */
+#define SPRN_DC_ADR	569	/* Address needed for some commands */
+#define SPRN_DC_DAT	570	/* Read-only data register */
+
+/* Commands.  Only the first few are available to the instruction cache.
+*/
+#define	IDC_ENABLE	0x02000000	/* Cache enable */
+#define IDC_DISABLE	0x04000000	/* Cache disable */
+#define IDC_LDLCK	0x06000000	/* Load and lock */
+#define IDC_UNLINE	0x08000000	/* Unlock line */
+#define IDC_UNALL	0x0a000000	/* Unlock all */
+#define IDC_INVALL	0x0c000000	/* Invalidate all */
+
+#define DC_FLINE	0x0e000000	/* Flush data cache line */
+#define DC_SFWT		0x01000000	/* Set forced writethrough mode */
+#define DC_CFWT		0x03000000	/* Clear forced writethrough mode */
+#define DC_SLES		0x05000000	/* Set little endian swap mode */
+#define DC_CLES		0x07000000	/* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED	0x80000000	/* Cache is enabled */
+#define IDC_CERR1	0x00200000	/* Cache error 1 */
+#define IDC_CERR2	0x00100000	/* Cache error 2 */
+#define IDC_CERR3	0x00080000	/* Cache error 3 */
+
+#define DC_DFWT		0x40000000	/* Data cache is forced write through */
+#define DC_LES		0x20000000	/* Caches are little endian mode */
+
+#endif /* _ASM_POWERPC_REG_8xx_H */