Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

152 files changed, 22805 insertions, 0 deletions

diff --git a/include/asm-ia64/a.out.h b/include/asm-ia64/a.out.h
new file mode 100644
index 000000000000..7293ac1df3ab
--- /dev/null
+++ b/include/asm-ia64/a.out.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_IA64_A_OUT_H
+#define _ASM_IA64_A_OUT_H
+
+/*
+ * No a.out format has been (or should be) defined so this file is
+ * just a dummy that allows us to get binfmt_elf compiled.  It
+ * probably would be better to clean up binfmt_elf.c so it does not
+ * necessarily depend on there being a.out support.
+ *
+ * Modified 1998-2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+#include <linux/types.h>
+
+struct exec {
+	unsigned long a_info;
+	unsigned long a_text;
+	unsigned long a_data;
+	unsigned long a_bss;
+	unsigned long a_entry;
+};
+
+#define N_TXTADDR(x)	0
+#define N_DATADDR(x)	0
+#define N_BSSADDR(x)	0
+#define N_DRSIZE(x)	0
+#define N_TRSIZE(x)	0
+#define N_SYMSIZE(x)	0
+#define N_TXTOFF(x)	0
+
+#ifdef __KERNEL__
+#include <asm/ustack.h>
+#endif
+#endif /* _ASM_IA64_A_OUT_H */
diff --git a/include/asm-ia64/acpi-ext.h b/include/asm-ia64/acpi-ext.h
new file mode 100644
index 000000000000..9271d74c64cc
--- /dev/null
+++ b/include/asm-ia64/acpi-ext.h
@@ -0,0 +1,17 @@
+/*
+ * ia64/platform/hp/common/hp_acpi.h
+ *
+ * Copyright (C) 2003 Hewlett-Packard
+ * Copyright (C) Alex Williamson
+ * Copyright (C) Bjorn Helgaas
+ *
+ * Vendor specific extensions to ACPI.
+ */
+#ifndef _ASM_IA64_ACPI_EXT_H
+#define _ASM_IA64_ACPI_EXT_H
+
+#include <linux/types.h>
+
+extern acpi_status hp_acpi_csr_space (acpi_handle, u64 *base, u64 *length);
+
+#endif /* _ASM_IA64_ACPI_EXT_H */
diff --git a/include/asm-ia64/acpi.h b/include/asm-ia64/acpi.h
new file mode 100644
index 000000000000..6a26a977f253
--- /dev/null
+++ b/include/asm-ia64/acpi.h
@@ -0,0 +1,112 @@
+/*
+ *  asm-ia64/acpi.h
+ *
+ *  Copyright (C) 1999 VA Linux Systems
+ *  Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ *  Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
+ *  Copyright (C) 2001,2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef _ASM_ACPI_H
+#define _ASM_ACPI_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/numa.h>
+#include <asm/system.h>
+
+#define COMPILER_DEPENDENT_INT64	long
+#define COMPILER_DEPENDENT_UINT64	unsigned long
+
+/*
+ * Calling conventions:
+ *
+ * ACPI_SYSTEM_XFACE        - Interfaces to host OS (handlers, threads)
+ * ACPI_EXTERNAL_XFACE      - External ACPI interfaces
+ * ACPI_INTERNAL_XFACE      - Internal ACPI interfaces
+ * ACPI_INTERNAL_VAR_XFACE  - Internal variable-parameter list interfaces
+ */
+#define ACPI_SYSTEM_XFACE
+#define ACPI_EXTERNAL_XFACE
+#define ACPI_INTERNAL_XFACE
+#define ACPI_INTERNAL_VAR_XFACE
+
+/* Asm macros */
+
+#define ACPI_ASM_MACROS
+#define BREAKPOINT3
+#define ACPI_DISABLE_IRQS() local_irq_disable()
+#define ACPI_ENABLE_IRQS()  local_irq_enable()
+#define ACPI_FLUSH_CPU_CACHE()
+
+static inline int
+ia64_acpi_acquire_global_lock (unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
+		val = ia64_cmpxchg4_acq(lock, new, old);
+	} while (unlikely (val != old));
+	return (new < 3) ? -1 : 0;
+}
+
+static inline int
+ia64_acpi_release_global_lock (unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = old & ~0x3;
+		val = ia64_cmpxchg4_acq(lock, new, old);
+	} while (unlikely (val != old));
+	return old & 0x1;
+}
+
+#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq)				\
+	((Acq) = ia64_acpi_acquire_global_lock((unsigned int *) GLptr))
+
+#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq)				\
+	((Acq) = ia64_acpi_release_global_lock((unsigned int *) GLptr))
+
+#define acpi_disabled 0	/* ACPI always enabled on IA64 */
+#define acpi_noirq 0	/* ACPI always enabled on IA64 */
+#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
+#define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
+static inline void disable_acpi(void) { }
+
+const char *acpi_get_sysname (void);
+int acpi_request_vector (u32 int_type);
+int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
+
+#ifdef CONFIG_ACPI_NUMA
+/* Proximity bitmap length; _PXM is at most 255 (8 bit)*/
+#define MAX_PXM_DOMAINS (256)
+extern int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS];
+extern int __initdata nid_to_pxm_map[MAX_NUMNODES];
+#endif
+
+extern u16 ia64_acpiid_to_sapicid[];
+
+#endif /*__KERNEL__*/
+
+#endif /*_ASM_ACPI_H*/
diff --git a/include/asm-ia64/agp.h b/include/asm-ia64/agp.h
new file mode 100644
index 000000000000..d1316f1e6ee1
--- /dev/null
+++ b/include/asm-ia64/agp.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_IA64_AGP_H
+#define _ASM_IA64_AGP_H
+
+/*
+ * IA-64 specific AGP definitions.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * To avoid memory-attribute aliasing issues, we require that the AGPGART engine operate
+ * in coherent mode, which lets us map the AGP memory as normal (write-back) memory
+ * (unlike x86, where it gets mapped "write-coalescing").
+ */
+#define map_page_into_agp(page)		/* nothing */
+#define unmap_page_from_agp(page)	/* nothing */
+#define flush_agp_mappings()		/* nothing */
+#define flush_agp_cache()		mb()
+
+#endif /* _ASM_IA64_AGP_H */
diff --git a/include/asm-ia64/asmmacro.h b/include/asm-ia64/asmmacro.h
new file mode 100644
index 000000000000..77af457f4ad7
--- /dev/null
+++ b/include/asm-ia64/asmmacro.h
@@ -0,0 +1,111 @@
+#ifndef _ASM_IA64_ASMMACRO_H
+#define _ASM_IA64_ASMMACRO_H
+
+/*
+ * Copyright (C) 2000-2001, 2003-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#define ENTRY(name)				\
+	.align 32;				\
+	.proc name;				\
+name:
+
+#define ENTRY_MIN_ALIGN(name)			\
+	.align 16;				\
+	.proc name;				\
+name:
+
+#define GLOBAL_ENTRY(name)			\
+	.global name;				\
+	ENTRY(name)
+
+#define END(name)				\
+	.endp name
+
+/*
+ * Helper macros to make unwind directives more readable:
+ */
+
+/* prologue_gr: */
+#define ASM_UNW_PRLG_RP			0x8
+#define ASM_UNW_PRLG_PFS		0x4
+#define ASM_UNW_PRLG_PSP		0x2
+#define ASM_UNW_PRLG_PR			0x1
+#define ASM_UNW_PRLG_GRSAVE(ninputs)	(32+(ninputs))
+
+/*
+ * Helper macros for accessing user memory.
+ */
+
+	.section "__ex_table", "a"		// declare section & section attributes
+	.previous
+
+# define EX(y,x...)				\
+	.xdata4 "__ex_table", 99f-., y-.;	\
+  [99:]	x
+# define EXCLR(y,x...)				\
+	.xdata4 "__ex_table", 99f-., y-.+4;	\
+  [99:]	x
+
+/*
+ * Mark instructions that need a load of a virtual address patched to be
+ * a load of a physical address.  We use this either in critical performance
+ * path (ivt.S - TLB miss processing) or in places where it might not be
+ * safe to use a "tpa" instruction (mca_asm.S - error recovery).
+ */
+	.section ".data.patch.vtop", "a"	// declare section & section attributes
+	.previous
+
+#define	LOAD_PHYSICAL(pr, reg, obj)		\
+[1:](pr)movl reg = obj;				\
+	.xdata4 ".data.patch.vtop", 1b-.
+
+/*
+ * For now, we always put in the McKinley E9 workaround.  On CPUs that don't need it,
+ * we'll patch out the work-around bundles with NOPs, so their impact is minimal.
+ */
+#define DO_MCKINLEY_E9_WORKAROUND
+
+#ifdef DO_MCKINLEY_E9_WORKAROUND
+	.section ".data.patch.mckinley_e9", "a"
+	.previous
+/* workaround for Itanium 2 Errata 9: */
+# define FSYS_RETURN					\
+	.xdata4 ".data.patch.mckinley_e9", 1f-.;	\
+1:{ .mib;						\
+	nop.m 0;					\
+	mov r16=ar.pfs;					\
+	br.call.sptk.many b7=2f;;			\
+  };							\
+2:{ .mib;						\
+	nop.m 0;					\
+	mov ar.pfs=r16;					\
+	br.ret.sptk.many b6;;				\
+  }
+#else
+# define FSYS_RETURN	br.ret.sptk.many b6
+#endif
+
+/*
+ * Up until early 2004, use of .align within a function caused bad unwind info.
+ * TEXT_ALIGN(n) expands into ".align n" if a fixed GAS is available or into nothing
+ * otherwise.
+ */
+#ifdef HAVE_WORKING_TEXT_ALIGN
+# define TEXT_ALIGN(n)	.align n
+#else
+# define TEXT_ALIGN(n)
+#endif
+
+#ifdef HAVE_SERIALIZE_DIRECTIVE
+# define dv_serialize_data		.serialize.data
+# define dv_serialize_instruction	.serialize.instruction
+#else
+# define dv_serialize_data
+# define dv_serialize_instruction
+#endif
+
+#endif /* _ASM_IA64_ASMMACRO_H */
diff --git a/include/asm-ia64/atomic.h b/include/asm-ia64/atomic.h
new file mode 100644
index 000000000000..874a6f890e75
--- /dev/null
+++ b/include/asm-ia64/atomic.h
@@ -0,0 +1,183 @@
+#ifndef _ASM_IA64_ATOMIC_H
+#define _ASM_IA64_ATOMIC_H
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * NOTE: don't mess with the types below!  The "unsigned long" and
+ * "int" types were carefully placed so as to ensure proper operation
+ * of the macros.
+ *
+ * Copyright (C) 1998, 1999, 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#include <linux/types.h>
+
+#include <asm/intrinsics.h>
+
+/*
+ * On IA-64, counter must always be volatile to ensure that that the
+ * memory accesses are ordered.
+ */
+typedef struct { volatile __s32 counter; } atomic_t;
+typedef struct { volatile __s64 counter; } atomic64_t;
+
+#define ATOMIC_INIT(i)		((atomic_t) { (i) })
+#define ATOMIC64_INIT(i)	((atomic64_t) { (i) })
+
+#define atomic_read(v)		((v)->counter)
+#define atomic64_read(v)	((v)->counter)
+
+#define atomic_set(v,i)		(((v)->counter) = (i))
+#define atomic64_set(v,i)	(((v)->counter) = (i))
+
+static __inline__ int
+ia64_atomic_add (int i, atomic_t *v)
+{
+	__s32 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic_read(v);
+		new = old + i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old);
+	return new;
+}
+
+static __inline__ int
+ia64_atomic64_add (__s64 i, atomic64_t *v)
+{
+	__s64 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic_read(v);
+		new = old + i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old);
+	return new;
+}
+
+static __inline__ int
+ia64_atomic_sub (int i, atomic_t *v)
+{
+	__s32 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic_read(v);
+		new = old - i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old);
+	return new;
+}
+
+static __inline__ int
+ia64_atomic64_sub (__s64 i, atomic64_t *v)
+{
+	__s64 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic_read(v);
+		new = old - i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old);
+	return new;
+}
+
+#define atomic_add_return(i,v)						\
+({									\
+	int __ia64_aar_i = (i);						\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_aar_i ==  1) || (__ia64_aar_i ==   4)		\
+	     || (__ia64_aar_i ==  8) || (__ia64_aar_i ==  16)		\
+	     || (__ia64_aar_i == -1) || (__ia64_aar_i ==  -4)		\
+	     || (__ia64_aar_i == -8) || (__ia64_aar_i == -16)))		\
+		? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter)	\
+		: ia64_atomic_add(__ia64_aar_i, v);			\
+})
+
+#define atomic64_add_return(i,v)					\
+({									\
+	long __ia64_aar_i = (i);					\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_aar_i ==  1) || (__ia64_aar_i ==   4)		\
+	     || (__ia64_aar_i ==  8) || (__ia64_aar_i ==  16)		\
+	     || (__ia64_aar_i == -1) || (__ia64_aar_i ==  -4)		\
+	     || (__ia64_aar_i == -8) || (__ia64_aar_i == -16)))		\
+		? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter)	\
+		: ia64_atomic64_add(__ia64_aar_i, v);			\
+})
+
+/*
+ * Atomically add I to V and return TRUE if the resulting value is
+ * negative.
+ */
+static __inline__ int
+atomic_add_negative (int i, atomic_t *v)
+{
+	return atomic_add_return(i, v) < 0;
+}
+
+static __inline__ int
+atomic64_add_negative (__s64 i, atomic64_t *v)
+{
+	return atomic64_add_return(i, v) < 0;
+}
+
+#define atomic_sub_return(i,v)						\
+({									\
+	int __ia64_asr_i = (i);						\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_asr_i ==   1) || (__ia64_asr_i ==   4)		\
+	     || (__ia64_asr_i ==   8) || (__ia64_asr_i ==  16)		\
+	     || (__ia64_asr_i ==  -1) || (__ia64_asr_i ==  -4)		\
+	     || (__ia64_asr_i ==  -8) || (__ia64_asr_i == -16)))	\
+		? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter)	\
+		: ia64_atomic_sub(__ia64_asr_i, v);			\
+})
+
+#define atomic64_sub_return(i,v)					\
+({									\
+	long __ia64_asr_i = (i);					\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_asr_i ==   1) || (__ia64_asr_i ==   4)		\
+	     || (__ia64_asr_i ==   8) || (__ia64_asr_i ==  16)		\
+	     || (__ia64_asr_i ==  -1) || (__ia64_asr_i ==  -4)		\
+	     || (__ia64_asr_i ==  -8) || (__ia64_asr_i == -16)))	\
+		? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter)	\
+		: ia64_atomic64_sub(__ia64_asr_i, v);			\
+})
+
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
+#define atomic64_dec_return(v)		atomic64_sub_return(1, (v))
+#define atomic64_inc_return(v)		atomic64_add_return(1, (v))
+
+#define atomic_sub_and_test(i,v)	(atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
+#define atomic64_sub_and_test(i,v)	(atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v)	(atomic64_sub_return(1, (v)) == 0)
+#define atomic64_inc_and_test(v)	(atomic64_add_return(1, (v)) == 0)
+
+#define atomic_add(i,v)			atomic_add_return((i), (v))
+#define atomic_sub(i,v)			atomic_sub_return((i), (v))
+#define atomic_inc(v)			atomic_add(1, (v))
+#define atomic_dec(v)			atomic_sub(1, (v))
+
+#define atomic64_add(i,v)		atomic64_add_return((i), (v))
+#define atomic64_sub(i,v)		atomic64_sub_return((i), (v))
+#define atomic64_inc(v)			atomic64_add(1, (v))
+#define atomic64_dec(v)			atomic64_sub(1, (v))
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif /* _ASM_IA64_ATOMIC_H */
diff --git a/include/asm-ia64/bitops.h b/include/asm-ia64/bitops.h
new file mode 100644
index 000000000000..925d54cee475
--- /dev/null
+++ b/include/asm-ia64/bitops.h
@@ -0,0 +1,410 @@
+#ifndef _ASM_IA64_BITOPS_H
+#define _ASM_IA64_BITOPS_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * 02/06/02 find_next_bit() and find_first_bit() added from Erich Focht's ia64 O(1)
+ *	    scheduler patch
+ */
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/bitops.h>
+#include <asm/intrinsics.h>
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ *
+ * The address must be (at least) "long" aligned.
+ * Note that there are driver (e.g., eepro100) which use these operations to operate on
+ * hw-defined data-structures, so we can't easily change these operations to force a
+ * bigger alignment.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+static __inline__ void
+set_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = 1 << (nr & 31);
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old | bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void
+__set_bit (int nr, volatile void *addr)
+{
+	*((__u32 *) addr + (nr >> 5)) |= (1 << (nr & 31));
+}
+
+/*
+ * clear_bit() has "acquire" semantics.
+ */
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	do { /* skip */; } while (0)
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static __inline__ void
+clear_bit (int nr, volatile void *addr)
+{
+	__u32 mask, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	mask = ~(1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old & mask;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * __clear_bit - Clears a bit in memory (non-atomic version)
+ */
+static __inline__ void
+__clear_bit (int nr, volatile void *addr)
+{
+	volatile __u32 *p = (__u32 *) addr + (nr >> 5);
+	__u32 m = 1 << (nr & 31);
+	*p &= ~m;
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void
+change_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = (1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old ^ bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void
+__change_bit (int nr, volatile void *addr)
+{
+	*((__u32 *) addr + (nr >> 5)) ^= (1 << (nr & 31));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+static __inline__ int
+test_and_set_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = 1 << (nr & 31);
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old | bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & bit) != 0;
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __inline__ int
+__test_and_set_bit (int nr, volatile void *addr)
+{
+	__u32 *p = (__u32 *) addr + (nr >> 5);
+	__u32 m = 1 << (nr & 31);
+	int oldbitset = (*p & m) != 0;
+
+	*p |= m;
+	return oldbitset;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+static __inline__ int
+test_and_clear_bit (int nr, volatile void *addr)
+{
+	__u32 mask, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	mask = ~(1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old & mask;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & ~mask) != 0;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __inline__ int
+__test_and_clear_bit(int nr, volatile void * addr)
+{
+	__u32 *p = (__u32 *) addr + (nr >> 5);
+	__u32 m = 1 << (nr & 31);
+	int oldbitset = *p & m;
+
+	*p &= ~m;
+	return oldbitset;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies a memory barrier.
+ */
+static __inline__ int
+test_and_change_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = (1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old ^ bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & bit) != 0;
+}
+
+/*
+ * WARNING: non atomic version.
+ */
+static __inline__ int
+__test_and_change_bit (int nr, void *addr)
+{
+	__u32 old, bit = (1 << (nr & 31));
+	__u32 *m = (__u32 *) addr + (nr >> 5);
+
+	old = *m;
+	*m = old ^ bit;
+	return (old & bit) != 0;
+}
+
+static __inline__ int
+test_bit (int nr, const volatile void *addr)
+{
+	return 1 & (((const volatile __u32 *) addr)[nr >> 5] >> (nr & 31));
+}
+
+/**
+ * ffz - find the first zero bit in a long word
+ * @x: The long word to find the bit in
+ *
+ * Returns the bit-number (0..63) of the first (least significant) zero bit.  Undefined if
+ * no zero exists, so code should check against ~0UL first...
+ */
+static inline unsigned long
+ffz (unsigned long x)
+{
+	unsigned long result;
+
+	result = ia64_popcnt(x & (~x - 1));
+	return result;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @x: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static __inline__ unsigned long
+__ffs (unsigned long x)
+{
+	unsigned long result;
+
+	result = ia64_popcnt((x-1) & ~x);
+	return result;
+}
+
+#ifdef __KERNEL__
+
+/*
+ * find_last_zero_bit - find the last zero bit in a 64 bit quantity
+ * @x: The value to search
+ */
+static inline unsigned long
+ia64_fls (unsigned long x)
+{
+	long double d = x;
+	long exp;
+
+	exp = ia64_getf_exp(d);
+	return exp - 0xffff;
+}
+
+static inline int
+fls (int x)
+{
+	return ia64_fls((unsigned int) x);
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as the libc and compiler builtin
+ * ffs routines, therefore differs in spirit from the above ffz (man ffs): it operates on
+ * "int" values only and the result value is the bit number + 1.  ffs(0) is defined to
+ * return zero.
+ */
+#define ffs(x)	__builtin_ffs(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+static __inline__ unsigned long
+hweight64 (unsigned long x)
+{
+	unsigned long result;
+	result = ia64_popcnt(x);
+	return result;
+}
+
+#define hweight32(x)	(unsigned int) hweight64((x) & 0xfffffffful)
+#define hweight16(x)	(unsigned int) hweight64((x) & 0xfffful)
+#define hweight8(x)	(unsigned int) hweight64((x) & 0xfful)
+
+#endif /* __KERNEL__ */
+
+extern int __find_next_zero_bit (const void *addr, unsigned long size,
+			unsigned long offset);
+extern int __find_next_bit(const void *addr, unsigned long size,
+			unsigned long offset);
+
+#define find_next_zero_bit(addr, size, offset) \
+			__find_next_zero_bit((addr), (size), (offset))
+#define find_next_bit(addr, size, offset) \
+			__find_next_bit((addr), (size), (offset))
+
+/*
+ * The optimizer actually does good code for this case..
+ */
+#define find_first_zero_bit(addr, size) find_next_zero_bit((addr), (size), 0)
+
+#define find_first_bit(addr, size) find_next_bit((addr), (size), 0)
+
+#ifdef __KERNEL__
+
+#define __clear_bit(nr, addr)		clear_bit(nr, addr)
+
+#define ext2_set_bit			test_and_set_bit
+#define ext2_set_bit_atomic(l,n,a)	test_and_set_bit(n,a)
+#define ext2_clear_bit			test_and_clear_bit
+#define ext2_clear_bit_atomic(l,n,a)	test_and_clear_bit(n,a)
+#define ext2_test_bit			test_bit
+#define ext2_find_first_zero_bit	find_first_zero_bit
+#define ext2_find_next_zero_bit		find_next_zero_bit
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr)		test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr)			set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr)	test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr)			test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size)	find_first_zero_bit(addr,size)
+
+static inline int
+sched_find_first_bit (unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return 64 + __ffs(b[1]);
+	return __ffs(b[2]) + 128;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_BITOPS_H */
diff --git a/include/asm-ia64/break.h b/include/asm-ia64/break.h
new file mode 100644
index 000000000000..97c7b2d79600
--- /dev/null
+++ b/include/asm-ia64/break.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_IA64_BREAK_H
+#define _ASM_IA64_BREAK_H
+
+/*
+ * IA-64 Linux break numbers.
+ *
+ * Copyright (C) 1999 Hewlett-Packard Co
+ * Copyright (C) 1999 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * OS-specific debug break numbers:
+ */
+#define __IA64_BREAK_KDB		0x80100
+
+/*
+ * OS-specific break numbers:
+ */
+#define __IA64_BREAK_SYSCALL		0x100000
+
+#endif /* _ASM_IA64_BREAK_H */
diff --git a/include/asm-ia64/bug.h b/include/asm-ia64/bug.h
new file mode 100644
index 000000000000..2c0cd51e8856
--- /dev/null
+++ b/include/asm-ia64/bug.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_IA64_BUG_H
+#define _ASM_IA64_BUG_H
+
+#if (__GNUC__ > 3) || (__GNUC__ == 3 && __GNUC_MINOR__ >= 1)
+# define ia64_abort()	__builtin_trap()
+#else
+# define ia64_abort()	(*(volatile int *) 0 = 0)
+#endif
+#define BUG() do { printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); ia64_abort(); } while (0)
+
+/* should this BUG should be made generic? */
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-ia64/bugs.h b/include/asm-ia64/bugs.h
new file mode 100644
index 000000000000..433523e3b2ed
--- /dev/null
+++ b/include/asm-ia64/bugs.h
@@ -0,0 +1,19 @@
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ *
+ * Based on <asm-alpha/bugs.h>.
+ *
+ * Modified 1998, 1999, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>,  Hewlett-Packard Co.
+ */
+#ifndef _ASM_IA64_BUGS_H
+#define _ASM_IA64_BUGS_H
+
+#include <asm/processor.h>
+
+extern void check_bugs (void);
+
+#endif /* _ASM_IA64_BUGS_H */
diff --git a/include/asm-ia64/byteorder.h b/include/asm-ia64/byteorder.h
new file mode 100644
index 000000000000..69bd41d7c26e
--- /dev/null
+++ b/include/asm-ia64/byteorder.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_IA64_BYTEORDER_H
+#define _ASM_IA64_BYTEORDER_H
+
+/*
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+#include <asm/types.h>
+#include <asm/intrinsics.h>
+#include <linux/compiler.h>
+
+static __inline__ __attribute_const__ __u64
+__ia64_swab64 (__u64 x)
+{
+	__u64 result;
+
+	result = ia64_mux1(x, ia64_mux1_rev);
+	return result;
+}
+
+static __inline__ __attribute_const__ __u32
+__ia64_swab32 (__u32 x)
+{
+	return __ia64_swab64(x) >> 32;
+}
+
+static __inline__ __attribute_const__ __u16
+__ia64_swab16(__u16 x)
+{
+	return __ia64_swab64(x) >> 48;
+}
+
+#define __arch__swab64(x) __ia64_swab64(x)
+#define __arch__swab32(x) __ia64_swab32(x)
+#define __arch__swab16(x) __ia64_swab16(x)
+
+#define __BYTEORDER_HAS_U64__
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_IA64_BYTEORDER_H */
diff --git a/include/asm-ia64/cache.h b/include/asm-ia64/cache.h
new file mode 100644
index 000000000000..666d8f175cb3
--- /dev/null
+++ b/include/asm-ia64/cache.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_IA64_CACHE_H
+#define _ASM_IA64_CACHE_H
+
+#include <linux/config.h>
+
+/*
+ * Copyright (C) 1998-2000 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/* Bytes per L1 (data) cache line.  */
+#define L1_CACHE_SHIFT		CONFIG_IA64_L1_CACHE_SHIFT
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define L1_CACHE_SHIFT_MAX 7	/* largest L1 which this arch supports */
+
+#ifdef CONFIG_SMP
+# define SMP_CACHE_SHIFT	L1_CACHE_SHIFT
+# define SMP_CACHE_BYTES	L1_CACHE_BYTES
+#else
+  /*
+   * The "aligned" directive can only _increase_ alignment, so this is
+   * safe and provides an easy way to avoid wasting space on a
+   * uni-processor:
+   */
+# define SMP_CACHE_SHIFT	3
+# define SMP_CACHE_BYTES	(1 << 3)
+#endif
+
+#endif /* _ASM_IA64_CACHE_H */
diff --git a/include/asm-ia64/cacheflush.h b/include/asm-ia64/cacheflush.h
new file mode 100644
index 000000000000..f2dacb4245ec
--- /dev/null
+++ b/include/asm-ia64/cacheflush.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_IA64_CACHEFLUSH_H
+#define _ASM_IA64_CACHEFLUSH_H
+
+/*
+ * Copyright (C) 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/page-flags.h>
+
+#include <asm/bitops.h>
+#include <asm/page.h>
+
+/*
+ * Cache flushing routines.  This is the kind of stuff that can be very expensive, so try
+ * to avoid them whenever possible.
+ */
+
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_icache_page(vma,page)		do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define flush_dcache_page(page)			\
+do {						\
+	clear_bit(PG_arch_1, &(page)->flags);	\
+} while (0)
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+extern void flush_icache_range (unsigned long start, unsigned long end);
+
+#define flush_icache_user_range(vma, page, user_addr, len)					\
+do {												\
+	unsigned long _addr = (unsigned long) page_address(page) + ((user_addr) & ~PAGE_MASK);	\
+	flush_icache_range(_addr, _addr + (len));						\
+} while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+     flush_icache_user_range(vma, page, vaddr, len); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* _ASM_IA64_CACHEFLUSH_H */
diff --git a/include/asm-ia64/checksum.h b/include/asm-ia64/checksum.h
new file mode 100644
index 000000000000..1f230ff8ea81
--- /dev/null
+++ b/include/asm-ia64/checksum.h
@@ -0,0 +1,76 @@
+#ifndef _ASM_IA64_CHECKSUM_H
+#define _ASM_IA64_CHECKSUM_H
+
+/*
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+extern unsigned short ip_fast_csum (unsigned char * iph, unsigned int ihl);
+
+/*
+ * Computes the checksum of the TCP/UDP pseudo-header returns a 16-bit
+ * checksum, already complemented
+ */
+extern unsigned short int csum_tcpudp_magic (unsigned long saddr,
+					     unsigned long daddr,
+					     unsigned short len,
+					     unsigned short proto,
+					     unsigned int sum);
+
+extern unsigned int csum_tcpudp_nofold (unsigned long saddr,
+					unsigned long daddr,
+					unsigned short len,
+					unsigned short proto,
+					unsigned int sum);
+
+/*
+ * Computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern unsigned int csum_partial (const unsigned char * buff, int len,
+				  unsigned int sum);
+
+/*
+ * Same as csum_partial, but copies from src while it checksums.
+ *
+ * Here it is even more important to align src and dst on a 32-bit (or
+ * even better 64-bit) boundary.
+ */
+extern unsigned int csum_partial_copy_from_user (const char *src, char *dst,
+						 int len, unsigned int sum,
+						 int *errp);
+
+extern unsigned int csum_partial_copy_nocheck (const char *src, char *dst,
+					       int len, unsigned int sum);
+
+/*
+ * This routine is used for miscellaneous IP-like checksums, mainly in
+ * icmp.c
+ */
+extern unsigned short ip_compute_csum (unsigned char *buff, int len);
+
+/*
+ * Fold a partial checksum without adding pseudo headers.
+ */
+static inline unsigned short
+csum_fold (unsigned int sum)
+{
+	sum = (sum & 0xffff) + (sum >> 16);
+	sum = (sum & 0xffff) + (sum >> 16);
+	return ~sum;
+}
+
+#endif /* _ASM_IA64_CHECKSUM_H */
diff --git a/include/asm-ia64/compat.h b/include/asm-ia64/compat.h
new file mode 100644
index 000000000000..cc0ff0a4bdd0
--- /dev/null
+++ b/include/asm-ia64/compat.h
@@ -0,0 +1,198 @@
+#ifndef _ASM_IA64_COMPAT_H
+#define _ASM_IA64_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_key_t;
+typedef s32		compat_pid_t;
+typedef u16		compat_uid_t;
+typedef u16		compat_gid_t;
+typedef u32		compat_uid32_t;
+typedef u32		compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef u16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	u16		__pad1;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	compat_uid_t	st_uid;
+	compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	u16		__pad2;
+	u32		st_size;
+	u32		st_blksize;
+	u32		st_blocks;
+	u32		st_atime;
+	u32		st_atime_nsec;
+	u32		st_mtime;
+	u32		st_mtime_nsec;
+	u32		st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4;
+	u32		__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64	12
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/*
+ * IA32 uses 4 byte alignment for 64 bit quantities,
+ * so we need to pack this structure.
+ */
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+} __attribute__((packed));
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY       0x7fffffff
+#define COMPAT_RLIM_INFINITY           0xffffffff
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	compat_uid32_t uid;
+	compat_gid32_t gid;
+	compat_uid32_t cuid;
+	compat_gid32_t cgid;
+	unsigned short mode;
+	unsigned short __pad1;
+	unsigned short seq;
+	unsigned short __pad2;
+	compat_ulong_t unused1;
+	compat_ulong_t unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t  sem_otime;
+	compat_ulong_t __unused1;
+	compat_time_t  sem_ctime;
+	compat_ulong_t __unused2;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused3;
+	compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	compat_time_t  msg_stime;
+	compat_ulong_t __unused1;
+	compat_time_t  msg_rtime;
+	compat_ulong_t __unused2;
+	compat_time_t  msg_ctime;
+	compat_ulong_t __unused3;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t   msg_lspid;
+	compat_pid_t   msg_lrpid;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t  shm_segsz;
+	compat_time_t  shm_atime;
+	compat_ulong_t __unused1;
+	compat_time_t  shm_dtime;
+	compat_ulong_t __unused2;
+	compat_time_t  shm_ctime;
+	compat_ulong_t __unused3;
+	compat_pid_t   shm_cpid;
+	compat_pid_t   shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+/*
+ * A pointer passed in from user mode. This should not be used for syscall parameters,
+ * just declare them as pointers because the syscall entry code will have appropriately
+ * comverted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *
+compat_ptr (compat_uptr_t uptr)
+{
+	return (void __user *) (unsigned long) uptr;
+}
+
+static __inline__ void __user *
+compat_alloc_user_space (long len)
+{
+	struct pt_regs *regs = ia64_task_regs(current);
+	return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len);
+}
+
+#endif /* _ASM_IA64_COMPAT_H */
diff --git a/include/asm-ia64/cpu.h b/include/asm-ia64/cpu.h
new file mode 100644
index 000000000000..e87fa3210a2b
--- /dev/null
+++ b/include/asm-ia64/cpu.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_CPU_H_
+#define _ASM_IA64_CPU_H_
+
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <linux/topology.h>
+#include <linux/percpu.h>
+
+struct ia64_cpu {
+	struct cpu cpu;
+};
+
+DECLARE_PER_CPU(struct ia64_cpu, cpu_devices);
+
+DECLARE_PER_CPU(int, cpu_state);
+
+extern int arch_register_cpu(int num);
+#ifdef CONFIG_HOTPLUG_CPU
+extern void arch_unregister_cpu(int);
+#endif
+
+#endif /* _ASM_IA64_CPU_H_ */
diff --git a/include/asm-ia64/cputime.h b/include/asm-ia64/cputime.h
new file mode 100644
index 000000000000..72400a78002a
--- /dev/null
+++ b/include/asm-ia64/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __IA64_CPUTIME_H
+#define __IA64_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __IA64_CPUTIME_H */
diff --git a/include/asm-ia64/current.h b/include/asm-ia64/current.h
new file mode 100644
index 000000000000..c659f90fbfd9
--- /dev/null
+++ b/include/asm-ia64/current.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_IA64_CURRENT_H
+#define _ASM_IA64_CURRENT_H
+
+/*
+ * Modified 1998-2000
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/intrinsics.h>
+
+/*
+ * In kernel mode, thread pointer (r13) is used to point to the current task
+ * structure.
+ */
+#define current	((struct task_struct *) ia64_getreg(_IA64_REG_TP))
+
+#endif /* _ASM_IA64_CURRENT_H */
diff --git a/include/asm-ia64/cyclone.h b/include/asm-ia64/cyclone.h
new file mode 100644
index 000000000000..88f6500e84ab
--- /dev/null
+++ b/include/asm-ia64/cyclone.h
@@ -0,0 +1,15 @@
+#ifndef ASM_IA64_CYCLONE_H
+#define ASM_IA64_CYCLONE_H
+
+#ifdef	CONFIG_IA64_CYCLONE
+extern int use_cyclone;
+extern void __init cyclone_setup(void);
+#else	/* CONFIG_IA64_CYCLONE */
+#define use_cyclone 0
+static inline void cyclone_setup(void)
+{
+	printk(KERN_ERR "Cyclone Counter: System not configured"
+					" w/ CONFIG_IA64_CYCLONE.\n");
+}
+#endif	/* CONFIG_IA64_CYCLONE */
+#endif	/* !ASM_IA64_CYCLONE_H */
diff --git a/include/asm-ia64/delay.h b/include/asm-ia64/delay.h
new file mode 100644
index 000000000000..57182d6f2b9a
--- /dev/null
+++ b/include/asm-ia64/delay.h
@@ -0,0 +1,97 @@
+#ifndef _ASM_IA64_DELAY_H
+#define _ASM_IA64_DELAY_H
+
+/*
+ * Delay routines using a pre-computed "cycles/usec" value.
+ *
+ * Copyright (C) 1998, 1999 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/compiler.h>
+
+#include <asm/intrinsics.h>
+#include <asm/processor.h>
+
+static __inline__ void
+ia64_set_itm (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_ITM, val);
+	ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itm (void)
+{
+	unsigned long result;
+
+	result = ia64_getreg(_IA64_REG_CR_ITM);
+	ia64_srlz_d();
+	return result;
+}
+
+static __inline__ void
+ia64_set_itv (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_ITV, val);
+	ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itv (void)
+{
+	return ia64_getreg(_IA64_REG_CR_ITV);
+}
+
+static __inline__ void
+ia64_set_itc (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_AR_ITC, val);
+	ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itc (void)
+{
+	unsigned long result;
+
+	result = ia64_getreg(_IA64_REG_AR_ITC);
+	ia64_barrier();
+#ifdef CONFIG_ITANIUM
+	while (unlikely((__s32) result == -1)) {
+		result = ia64_getreg(_IA64_REG_AR_ITC);
+		ia64_barrier();
+	}
+#endif
+	return result;
+}
+
+extern void ia64_delay_loop (unsigned long loops);
+
+static __inline__ void
+__delay (unsigned long loops)
+{
+	if (unlikely(loops < 1))
+		return;
+
+	ia64_delay_loop (loops - 1);
+}
+
+static __inline__ void
+udelay (unsigned long usecs)
+{
+	unsigned long start = ia64_get_itc();
+	unsigned long cycles = usecs*local_cpu_data->cyc_per_usec;
+
+	while (ia64_get_itc() - start < cycles)
+		cpu_relax();
+}
+
+#endif /* _ASM_IA64_DELAY_H */
diff --git a/include/asm-ia64/div64.h b/include/asm-ia64/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/include/asm-ia64/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-ia64/dma-mapping.h b/include/asm-ia64/dma-mapping.h
new file mode 100644
index 000000000000..6347c9845642
--- /dev/null
+++ b/include/asm-ia64/dma-mapping.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_IA64_DMA_MAPPING_H
+#define _ASM_IA64_DMA_MAPPING_H
+
+/*
+ * Copyright (C) 2003-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#include <linux/config.h>
+#include <asm/machvec.h>
+
+#define dma_alloc_coherent	platform_dma_alloc_coherent
+#define dma_alloc_noncoherent	platform_dma_alloc_coherent	/* coherent mem. is cheap */
+#define dma_free_coherent	platform_dma_free_coherent
+#define dma_free_noncoherent	platform_dma_free_coherent
+#define dma_map_single		platform_dma_map_single
+#define dma_map_sg		platform_dma_map_sg
+#define dma_unmap_single	platform_dma_unmap_single
+#define dma_unmap_sg		platform_dma_unmap_sg
+#define dma_sync_single_for_cpu	platform_dma_sync_single_for_cpu
+#define dma_sync_sg_for_cpu	platform_dma_sync_sg_for_cpu
+#define dma_sync_single_for_device platform_dma_sync_single_for_device
+#define dma_sync_sg_for_device	platform_dma_sync_sg_for_device
+#define dma_mapping_error	platform_dma_mapping_error
+
+#define dma_map_page(dev, pg, off, size, dir)				\
+	dma_map_single(dev, page_address(pg) + (off), (size), (dir))
+#define dma_unmap_page(dev, dma_addr, size, dir)			\
+	dma_unmap_single(dev, dma_addr, size, dir)
+
+/*
+ * Rest of this file is part of the "Advanced DMA API".  Use at your own risk.
+ * See Documentation/DMA-API.txt for details.
+ */
+
+#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir)	\
+	dma_sync_single_for_cpu(dev, dma_handle, size, dir)
+#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir)	\
+	dma_sync_single_for_device(dev, dma_handle, size, dir)
+
+#define dma_supported		platform_dma_supported
+
+static inline int
+dma_set_mask (struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+	*dev->dma_mask = mask;
+	return 0;
+}
+
+static inline int
+dma_get_cache_alignment (void)
+{
+	extern int ia64_max_cacheline_size;
+	return ia64_max_cacheline_size;
+}
+
+static inline void
+dma_cache_sync (void *vaddr, size_t size, enum dma_data_direction dir)
+{
+	/*
+	 * IA-64 is cache-coherent, so this is mostly a no-op.  However, we do need to
+	 * ensure that dma_cache_sync() enforces order, hence the mb().
+	 */
+	mb();
+}
+
+#define dma_is_consistent(dma_handle)	(1)	/* all we do is coherent memory... */
+
+#endif /* _ASM_IA64_DMA_MAPPING_H */
diff --git a/include/asm-ia64/dma.h b/include/asm-ia64/dma.h
new file mode 100644
index 000000000000..3be1b4925e18
--- /dev/null
+++ b/include/asm-ia64/dma.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_IA64_DMA_H
+#define _ASM_IA64_DMA_H
+
+/*
+ * Copyright (C) 1998-2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <asm/io.h>		/* need byte IO */
+
+extern unsigned long MAX_DMA_ADDRESS;
+
+#ifdef CONFIG_PCI
+  extern int isa_dma_bridge_buggy;
+#else
+# define isa_dma_bridge_buggy 	(0)
+#endif
+
+#define free_dma(x)
+
+#endif /* _ASM_IA64_DMA_H */
diff --git a/include/asm-ia64/elf.h b/include/asm-ia64/elf.h
new file mode 100644
index 000000000000..7d4ccc4b976e
--- /dev/null
+++ b/include/asm-ia64/elf.h
@@ -0,0 +1,259 @@
+#ifndef _ASM_IA64_ELF_H
+#define _ASM_IA64_ELF_H
+
+/*
+ * ELF-specific definitions.
+ *
+ * Copyright (C) 1998-1999, 2002-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <asm/fpu.h>
+#include <asm/page.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_IA_64)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_IA_64
+
+#define USE_ELF_CORE_DUMP
+
+/* Least-significant four bits of ELF header's e_flags are OS-specific.  The bits are
+   interpreted as follows by Linux: */
+#define EF_IA_64_LINUX_EXECUTABLE_STACK	0x1	/* is stack (& heap) executable by default? */
+
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.
+ * Typical use of this is to invoke "./ld.so someprog" to test out a
+ * new version of the loader.  We need to make sure that it is out of
+ * the way of the program that it will "exec", and that there is
+ * sufficient room for the brk.
+ */
+#define ELF_ET_DYN_BASE		(TASK_UNMAPPED_BASE + 0x800000000UL)
+
+#define PT_IA_64_UNWIND		0x70000001
+
+/* IA-64 relocations: */
+#define R_IA64_NONE		0x00	/* none */
+#define R_IA64_IMM14		0x21	/* symbol + addend, add imm14 */
+#define R_IA64_IMM22		0x22	/* symbol + addend, add imm22 */
+#define R_IA64_IMM64		0x23	/* symbol + addend, mov imm64 */
+#define R_IA64_DIR32MSB		0x24	/* symbol + addend, data4 MSB */
+#define R_IA64_DIR32LSB		0x25	/* symbol + addend, data4 LSB */
+#define R_IA64_DIR64MSB		0x26	/* symbol + addend, data8 MSB */
+#define R_IA64_DIR64LSB		0x27	/* symbol + addend, data8 LSB */
+#define R_IA64_GPREL22		0x2a	/* @gprel(sym+add), add imm22 */
+#define R_IA64_GPREL64I		0x2b	/* @gprel(sym+add), mov imm64 */
+#define R_IA64_GPREL32MSB	0x2c	/* @gprel(sym+add), data4 MSB */
+#define R_IA64_GPREL32LSB	0x2d	/* @gprel(sym+add), data4 LSB */
+#define R_IA64_GPREL64MSB	0x2e	/* @gprel(sym+add), data8 MSB */
+#define R_IA64_GPREL64LSB	0x2f	/* @gprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF22		0x32	/* @ltoff(sym+add), add imm22 */
+#define R_IA64_LTOFF64I		0x33	/* @ltoff(sym+add), mov imm64 */
+#define R_IA64_PLTOFF22		0x3a	/* @pltoff(sym+add), add imm22 */
+#define R_IA64_PLTOFF64I	0x3b	/* @pltoff(sym+add), mov imm64 */
+#define R_IA64_PLTOFF64MSB	0x3e	/* @pltoff(sym+add), data8 MSB */
+#define R_IA64_PLTOFF64LSB	0x3f	/* @pltoff(sym+add), data8 LSB */
+#define R_IA64_FPTR64I		0x43	/* @fptr(sym+add), mov imm64 */
+#define R_IA64_FPTR32MSB	0x44	/* @fptr(sym+add), data4 MSB */
+#define R_IA64_FPTR32LSB	0x45	/* @fptr(sym+add), data4 LSB */
+#define R_IA64_FPTR64MSB	0x46	/* @fptr(sym+add), data8 MSB */
+#define R_IA64_FPTR64LSB	0x47	/* @fptr(sym+add), data8 LSB */
+#define R_IA64_PCREL60B		0x48	/* @pcrel(sym+add), brl */
+#define R_IA64_PCREL21B		0x49	/* @pcrel(sym+add), ptb, call */
+#define R_IA64_PCREL21M		0x4a	/* @pcrel(sym+add), chk.s */
+#define R_IA64_PCREL21F		0x4b	/* @pcrel(sym+add), fchkf */
+#define R_IA64_PCREL32MSB	0x4c	/* @pcrel(sym+add), data4 MSB */
+#define R_IA64_PCREL32LSB	0x4d	/* @pcrel(sym+add), data4 LSB */
+#define R_IA64_PCREL64MSB	0x4e	/* @pcrel(sym+add), data8 MSB */
+#define R_IA64_PCREL64LSB	0x4f	/* @pcrel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_FPTR22	0x52	/* @ltoff(@fptr(s+a)), imm22 */
+#define R_IA64_LTOFF_FPTR64I	0x53	/* @ltoff(@fptr(s+a)), imm64 */
+#define R_IA64_LTOFF_FPTR32MSB	0x54	/* @ltoff(@fptr(s+a)), 4 MSB */
+#define R_IA64_LTOFF_FPTR32LSB	0x55	/* @ltoff(@fptr(s+a)), 4 LSB */
+#define R_IA64_LTOFF_FPTR64MSB	0x56	/* @ltoff(@fptr(s+a)), 8 MSB */
+#define R_IA64_LTOFF_FPTR64LSB	0x57	/* @ltoff(@fptr(s+a)), 8 LSB */
+#define R_IA64_SEGREL32MSB	0x5c	/* @segrel(sym+add), data4 MSB */
+#define R_IA64_SEGREL32LSB	0x5d	/* @segrel(sym+add), data4 LSB */
+#define R_IA64_SEGREL64MSB	0x5e	/* @segrel(sym+add), data8 MSB */
+#define R_IA64_SEGREL64LSB	0x5f	/* @segrel(sym+add), data8 LSB */
+#define R_IA64_SECREL32MSB	0x64	/* @secrel(sym+add), data4 MSB */
+#define R_IA64_SECREL32LSB	0x65	/* @secrel(sym+add), data4 LSB */
+#define R_IA64_SECREL64MSB	0x66	/* @secrel(sym+add), data8 MSB */
+#define R_IA64_SECREL64LSB	0x67	/* @secrel(sym+add), data8 LSB */
+#define R_IA64_REL32MSB		0x6c	/* data 4 + REL */
+#define R_IA64_REL32LSB		0x6d	/* data 4 + REL */
+#define R_IA64_REL64MSB		0x6e	/* data 8 + REL */
+#define R_IA64_REL64LSB		0x6f	/* data 8 + REL */
+#define R_IA64_LTV32MSB		0x74	/* symbol + addend, data4 MSB */
+#define R_IA64_LTV32LSB		0x75	/* symbol + addend, data4 LSB */
+#define R_IA64_LTV64MSB		0x76	/* symbol + addend, data8 MSB */
+#define R_IA64_LTV64LSB		0x77	/* symbol + addend, data8 LSB */
+#define R_IA64_PCREL21BI	0x79	/* @pcrel(sym+add), ptb, call */
+#define R_IA64_PCREL22		0x7a	/* @pcrel(sym+add), imm22 */
+#define R_IA64_PCREL64I		0x7b	/* @pcrel(sym+add), imm64 */
+#define R_IA64_IPLTMSB		0x80	/* dynamic reloc, imported PLT, MSB */
+#define R_IA64_IPLTLSB		0x81	/* dynamic reloc, imported PLT, LSB */
+#define R_IA64_COPY		0x84	/* dynamic reloc, data copy */
+#define R_IA64_SUB		0x85	/* -symbol + addend, add imm22 */
+#define R_IA64_LTOFF22X		0x86	/* LTOFF22, relaxable.  */
+#define R_IA64_LDXMOV		0x87	/* Use of LTOFF22X.  */
+#define R_IA64_TPREL14		0x91	/* @tprel(sym+add), add imm14 */
+#define R_IA64_TPREL22		0x92	/* @tprel(sym+add), add imm22 */
+#define R_IA64_TPREL64I		0x93	/* @tprel(sym+add), add imm64 */
+#define R_IA64_TPREL64MSB	0x96	/* @tprel(sym+add), data8 MSB */
+#define R_IA64_TPREL64LSB	0x97	/* @tprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_TPREL22	0x9a	/* @ltoff(@tprel(s+a)), add imm22 */
+#define R_IA64_DTPMOD64MSB	0xa6	/* @dtpmod(sym+add), data8 MSB */
+#define R_IA64_DTPMOD64LSB	0xa7	/* @dtpmod(sym+add), data8 LSB */
+#define R_IA64_LTOFF_DTPMOD22	0xaa	/* @ltoff(@dtpmod(s+a)), imm22 */
+#define R_IA64_DTPREL14		0xb1	/* @dtprel(sym+add), imm14 */
+#define R_IA64_DTPREL22		0xb2	/* @dtprel(sym+add), imm22 */
+#define R_IA64_DTPREL64I	0xb3	/* @dtprel(sym+add), imm64 */
+#define R_IA64_DTPREL32MSB	0xb4	/* @dtprel(sym+add), data4 MSB */
+#define R_IA64_DTPREL32LSB	0xb5	/* @dtprel(sym+add), data4 LSB */
+#define R_IA64_DTPREL64MSB	0xb6	/* @dtprel(sym+add), data8 MSB */
+#define R_IA64_DTPREL64LSB	0xb7	/* @dtprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_DTPREL22	0xba	/* @ltoff(@dtprel(s+a)), imm22 */
+
+/* IA-64 specific section flags: */
+#define SHF_IA_64_SHORT		0x10000000	/* section near gp */
+
+/*
+ * We use (abuse?) this macro to insert the (empty) vm_area that is
+ * used to map the register backing store.  I don't see any better
+ * place to do this, but we should discuss this with Linus once we can
+ * talk to him...
+ */
+extern void ia64_init_addr_space (void);
+#define ELF_PLAT_INIT(_r, load_addr)	ia64_init_addr_space()
+
+/* ELF register definitions.  This is needed for core dump support.  */
+
+/*
+ * elf_gregset_t contains the application-level state in the following order:
+ *	r0-r31
+ *	NaT bits (for r0-r31; bit N == 1 iff rN is a NaT)
+ *	predicate registers (p0-p63)
+ *	b0-b7
+ *	ip cfm psr
+ *	ar.rsc ar.bsp ar.bspstore ar.rnat
+ *	ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec ar.csd ar.ssd
+ */
+#define ELF_NGREG	128	/* we really need just 72 but let's leave some headroom... */
+#define ELF_NFPREG	128	/* f0 and f1 could be omitted, but so what... */
+
+typedef unsigned long elf_fpxregset_t;
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct ia64_fpreg elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+
+
+struct pt_regs;	/* forward declaration... */
+extern void ia64_elf_core_copy_regs (struct pt_regs *src, elf_gregset_t dst);
+#define ELF_CORE_COPY_REGS(_dest,_regs)	ia64_elf_core_copy_regs(_regs, _dest);
+
+/* This macro yields a bitmask that programs can use to figure out
+   what instruction set this CPU supports.  */
+#define ELF_HWCAP 	0
+
+/* This macro yields a string that ld.so will use to load
+   implementation specific libraries for optimization.  Not terribly
+   relevant until we have real hardware to play with... */
+#define ELF_PLATFORM	NULL
+
+/*
+ * Architecture-neutral AT_ values are in the range 0-17.  Leave some room for more of
+ * them, start the architecture-specific ones at 32.
+ */
+#define AT_SYSINFO	32
+#define AT_SYSINFO_EHDR	33
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2)	set_personality(PER_LINUX)
+#define elf_read_implies_exec(ex, executable_stack)					\
+	((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0)
+
+struct task_struct;
+
+extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_gregs) dump_task_regs(tsk, elf_gregs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+
+#define GATE_EHDR	((const struct elfhdr *) GATE_ADDR)
+
+#define ARCH_DLINFO								\
+do {										\
+	extern char __kernel_syscall_via_epc[];					\
+	NEW_AUX_ENT(AT_SYSINFO, (unsigned long) __kernel_syscall_via_epc);	\
+	NEW_AUX_ENT(AT_SYSINFO_EHDR, (unsigned long) GATE_EHDR);		\
+} while (0)
+
+
+/*
+ * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out
+ * extra segments containing the gate DSO contents.  Dumping its
+ * contents makes post-mortem fully interpretable later without matching up
+ * the same kernel and hardware config to see what PC values meant.
+ * Dumping its extra ELF program headers includes all the other information
+ * a debugger needs to easily find how the gate DSO was being used.
+ */
+#define ELF_CORE_EXTRA_PHDRS		(GATE_EHDR->e_phnum)
+#define ELF_CORE_WRITE_EXTRA_PHDRS						\
+do {										\
+	const struct elf_phdr *const gate_phdrs =			      \
+		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);   \
+	int i;									\
+	Elf64_Off ofs = 0;						      \
+	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {				\
+		struct elf_phdr phdr = gate_phdrs[i];			      \
+		if (phdr.p_type == PT_LOAD) {					\
+			phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz);	      \
+			phdr.p_filesz = phdr.p_memsz;			      \
+			if (ofs == 0) {					      \
+				ofs = phdr.p_offset = offset;		      \
+			offset += phdr.p_filesz;				\
+		}							      \
+		else							      \
+				phdr.p_offset = ofs;			      \
+		}							      \
+		else							      \
+			phdr.p_offset += ofs;					\
+		phdr.p_paddr = 0; /* match other core phdrs */			\
+		DUMP_WRITE(&phdr, sizeof(phdr));				\
+	}									\
+} while (0)
+#define ELF_CORE_WRITE_EXTRA_DATA					\
+do {									\
+	const struct elf_phdr *const gate_phdrs =			      \
+		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);   \
+	int i;								\
+	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {			\
+		if (gate_phdrs[i].p_type == PT_LOAD) {			      \
+			DUMP_WRITE((void *) gate_phdrs[i].p_vaddr,	      \
+				   PAGE_ALIGN(gate_phdrs[i].p_memsz));	      \
+			break;						      \
+		}							      \
+	}								\
+} while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_ELF_H */
diff --git a/include/asm-ia64/errno.h b/include/asm-ia64/errno.h
new file mode 100644
index 000000000000..4c82b503d92f
--- /dev/null
+++ b/include/asm-ia64/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/include/asm-ia64/fcntl.h b/include/asm-ia64/fcntl.h
new file mode 100644
index 000000000000..d193981bb1d8
--- /dev/null
+++ b/include/asm-ia64/fcntl.h
@@ -0,0 +1,84 @@
+#ifndef _ASM_IA64_FCNTL_H
+#define _ASM_IA64_FCNTL_H
+/*
+ * Based on <asm-i386/fcntl.h>.
+ *
+ * Modified 1998-2000
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+/*
+ * open/fcntl - O_SYNC is only implemented on blocks devices and on
+ * files located on an ext2 file system
+ */
+#define O_ACCMODE	   0003
+#define O_RDONLY	     00
+#define O_WRONLY	     01
+#define O_RDWR		     02
+#define O_CREAT		   0100	/* not fcntl */
+#define O_EXCL		   0200	/* not fcntl */
+#define O_NOCTTY	   0400	/* not fcntl */
+#define O_TRUNC		  01000	/* not fcntl */
+#define O_APPEND	  02000
+#define O_NONBLOCK	  04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		 010000
+#define FASYNC		 020000	/* fcntl, for BSD compatibility */
+#define O_DIRECT	 040000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0100000
+#define O_DIRECTORY	0200000	/* must be a directory */
+#define O_NOFOLLOW	0400000 /* don't follow links */
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+
+#endif /* _ASM_IA64_FCNTL_H */
diff --git a/include/asm-ia64/fpswa.h b/include/asm-ia64/fpswa.h
new file mode 100644
index 000000000000..62edfceadaa6
--- /dev/null
+++ b/include/asm-ia64/fpswa.h
@@ -0,0 +1,73 @@
+#ifndef _ASM_IA64_FPSWA_H
+#define _ASM_IA64_FPSWA_H
+
+/*
+ * Floating-point Software Assist
+ *
+ * Copyright (C) 1999 Intel Corporation.
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Goutham Rao <goutham.rao@intel.com>
+ */
+
+typedef struct {
+	/* 4 * 128 bits */
+	unsigned long fp_lp[4*2];
+} fp_state_low_preserved_t;
+
+typedef struct {
+	/* 10 * 128 bits */
+	unsigned long fp_lv[10 * 2];
+} fp_state_low_volatile_t;
+
+typedef	struct {
+	/* 16 * 128 bits */
+	unsigned long fp_hp[16 * 2];
+} fp_state_high_preserved_t;
+
+typedef struct {
+	/* 96 * 128 bits */
+	unsigned long fp_hv[96 * 2];
+} fp_state_high_volatile_t;
+
+/**
+ * floating point state to be passed to the FP emulation library by
+ * the trap/fault handler
+ */
+typedef struct {
+	unsigned long			bitmask_low64;
+	unsigned long			bitmask_high64;
+	fp_state_low_preserved_t	*fp_state_low_preserved;
+	fp_state_low_volatile_t		*fp_state_low_volatile;
+	fp_state_high_preserved_t	*fp_state_high_preserved;
+	fp_state_high_volatile_t	*fp_state_high_volatile;
+} fp_state_t;
+
+typedef struct {
+	unsigned long status;
+	unsigned long err0;
+	unsigned long err1;
+	unsigned long err2;
+} fpswa_ret_t;
+
+/**
+ * function header for the Floating Point software assist
+ * library. This function is invoked by the Floating point software
+ * assist trap/fault handler.
+ */
+typedef fpswa_ret_t (*efi_fpswa_t) (unsigned long trap_type, void *bundle, unsigned long *ipsr,
+				    unsigned long *fsr, unsigned long *isr, unsigned long *preds,
+				    unsigned long *ifs, fp_state_t *fp_state);
+
+/**
+ * This is the FPSWA library interface as defined by EFI.  We need to pass a 
+ * pointer to the interface itself on a call to the assist library
+ */
+typedef struct {
+	unsigned int	 revision;
+	unsigned int	 reserved;
+	efi_fpswa_t	 fpswa;
+} fpswa_interface_t;
+
+extern fpswa_interface_t *fpswa_interface;
+
+#endif /* _ASM_IA64_FPSWA_H */
diff --git a/include/asm-ia64/fpu.h b/include/asm-ia64/fpu.h
new file mode 100644
index 000000000000..3859558ff0a4
--- /dev/null
+++ b/include/asm-ia64/fpu.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_IA64_FPU_H
+#define _ASM_IA64_FPU_H
+
+/*
+ * Copyright (C) 1998, 1999, 2002, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/types.h>
+
+/* floating point status register: */
+#define FPSR_TRAP_VD	(1 << 0)	/* invalid op trap disabled */
+#define FPSR_TRAP_DD	(1 << 1)	/* denormal trap disabled */
+#define FPSR_TRAP_ZD	(1 << 2)	/* zero-divide trap disabled */
+#define FPSR_TRAP_OD	(1 << 3)	/* overflow trap disabled */
+#define FPSR_TRAP_UD	(1 << 4)	/* underflow trap disabled */
+#define FPSR_TRAP_ID	(1 << 5)	/* inexact trap disabled */
+#define FPSR_S0(x)	((x) <<  6)
+#define FPSR_S1(x)	((x) << 19)
+#define FPSR_S2(x)	(__IA64_UL(x) << 32)
+#define FPSR_S3(x)	(__IA64_UL(x) << 45)
+
+/* floating-point status field controls: */
+#define FPSF_FTZ	(1 << 0)		/* flush-to-zero */
+#define FPSF_WRE	(1 << 1)		/* widest-range exponent */
+#define FPSF_PC(x)	(((x) & 0x3) << 2)	/* precision control */
+#define FPSF_RC(x)	(((x) & 0x3) << 4)	/* rounding control */
+#define FPSF_TD		(1 << 6)		/* trap disabled */
+
+/* floating-point status field flags: */
+#define FPSF_V		(1 <<  7)		/* invalid operation flag */
+#define FPSF_D		(1 <<  8)		/* denormal/unnormal operand flag */
+#define FPSF_Z		(1 <<  9)		/* zero divide (IEEE) flag */
+#define FPSF_O		(1 << 10)		/* overflow (IEEE) flag */
+#define FPSF_U		(1 << 11)		/* underflow (IEEE) flag */
+#define FPSF_I		(1 << 12)		/* inexact (IEEE) flag) */
+
+/* floating-point rounding control: */
+#define FPRC_NEAREST	0x0
+#define FPRC_NEGINF	0x1
+#define FPRC_POSINF	0x2
+#define FPRC_TRUNC	0x3
+
+#define FPSF_DEFAULT	(FPSF_PC (0x3) | FPSF_RC (FPRC_NEAREST))
+
+/* This default value is the same as HP-UX uses.  Don't change it
+   without a very good reason.  */
+#define FPSR_DEFAULT	(FPSR_TRAP_VD | FPSR_TRAP_DD | FPSR_TRAP_ZD	\
+			 | FPSR_TRAP_OD | FPSR_TRAP_UD | FPSR_TRAP_ID	\
+			 | FPSR_S0 (FPSF_DEFAULT)			\
+			 | FPSR_S1 (FPSF_DEFAULT | FPSF_TD | FPSF_WRE)	\
+			 | FPSR_S2 (FPSF_DEFAULT | FPSF_TD)		\
+			 | FPSR_S3 (FPSF_DEFAULT | FPSF_TD))
+
+# ifndef __ASSEMBLY__
+
+struct ia64_fpreg {
+	union {
+		unsigned long bits[2];
+		long double __dummy;	/* force 16-byte alignment */
+	} u;
+};
+
+# endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_FPU_H */
diff --git a/include/asm-ia64/gcc_intrin.h b/include/asm-ia64/gcc_intrin.h
new file mode 100644
index 000000000000..7c357dfbae50
--- /dev/null
+++ b/include/asm-ia64/gcc_intrin.h
@@ -0,0 +1,597 @@
+#ifndef _ASM_IA64_GCC_INTRIN_H
+#define _ASM_IA64_GCC_INTRIN_H
+/*
+ *
+ * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
+ * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+
+#include <linux/compiler.h>
+
+/* define this macro to get some asm stmts included in 'c' files */
+#define ASM_SUPPORTED
+
+/* Optimization barrier */
+/* The "volatile" is due to gcc bugs */
+#define ia64_barrier()	asm volatile ("":::"memory")
+
+#define ia64_stop()	asm volatile (";;"::)
+
+#define ia64_invala_gr(regnum)	asm volatile ("invala.e r%0" :: "i"(regnum))
+
+#define ia64_invala_fr(regnum)	asm volatile ("invala.e f%0" :: "i"(regnum))
+
+extern void ia64_bad_param_for_setreg (void);
+extern void ia64_bad_param_for_getreg (void);
+
+register unsigned long ia64_r13 asm ("r13") __attribute_used__;
+
+#define ia64_setreg(regnum, val)						\
+({										\
+	switch (regnum) {							\
+	    case _IA64_REG_PSR_L:						\
+		    asm volatile ("mov psr.l=%0" :: "r"(val) : "memory");	\
+		    break;							\
+	    case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
+		    asm volatile ("mov ar%0=%1" ::				\
+		    			  "i" (regnum - _IA64_REG_AR_KR0),	\
+					  "r"(val): "memory");			\
+		    break;							\
+	    case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:			\
+		    asm volatile ("mov cr%0=%1" ::				\
+				          "i" (regnum - _IA64_REG_CR_DCR),	\
+					  "r"(val): "memory" );			\
+		    break;							\
+	    case _IA64_REG_SP:							\
+		    asm volatile ("mov r12=%0" ::				\
+			    		  "r"(val): "memory");			\
+		    break;							\
+	    case _IA64_REG_GP:							\
+		    asm volatile ("mov gp=%0" :: "r"(val) : "memory");		\
+		break;								\
+	    default:								\
+		    ia64_bad_param_for_setreg();				\
+		    break;							\
+	}									\
+})
+
+#define ia64_getreg(regnum)							\
+({										\
+	__u64 ia64_intri_res;							\
+										\
+	switch (regnum) {							\
+	case _IA64_REG_GP:							\
+		asm volatile ("mov %0=gp" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_IP:							\
+		asm volatile ("mov %0=ip" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_PSR:							\
+		asm volatile ("mov %0=psr" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_TP:	/* for current() */				\
+		ia64_intri_res = ia64_r13;					\
+		break;								\
+	case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
+		asm volatile ("mov %0=ar%1" : "=r" (ia64_intri_res)		\
+				      : "i"(regnum - _IA64_REG_AR_KR0));	\
+		break;								\
+	case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:				\
+		asm volatile ("mov %0=cr%1" : "=r" (ia64_intri_res)		\
+				      : "i" (regnum - _IA64_REG_CR_DCR));	\
+		break;								\
+	case _IA64_REG_SP:							\
+		asm volatile ("mov %0=sp" : "=r" (ia64_intri_res));		\
+		break;								\
+	default:								\
+		ia64_bad_param_for_getreg();					\
+		break;								\
+	}									\
+	ia64_intri_res;								\
+})
+
+#define ia64_hint_pause 0
+
+#define ia64_hint(mode)						\
+({								\
+	switch (mode) {						\
+	case ia64_hint_pause:					\
+		asm volatile ("hint @pause" ::: "memory");	\
+		break;						\
+	}							\
+})
+
+
+/* Integer values for mux1 instruction */
+#define ia64_mux1_brcst 0
+#define ia64_mux1_mix   8
+#define ia64_mux1_shuf  9
+#define ia64_mux1_alt  10
+#define ia64_mux1_rev  11
+
+#define ia64_mux1(x, mode)							\
+({										\
+	__u64 ia64_intri_res;							\
+										\
+	switch (mode) {								\
+	case ia64_mux1_brcst:							\
+		asm ("mux1 %0=%1,@brcst" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_mix:							\
+		asm ("mux1 %0=%1,@mix" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_shuf:							\
+		asm ("mux1 %0=%1,@shuf" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_alt:							\
+		asm ("mux1 %0=%1,@alt" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_rev:							\
+		asm ("mux1 %0=%1,@rev" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	}									\
+	ia64_intri_res;								\
+})
+
+#define ia64_popcnt(x)						\
+({								\
+	__u64 ia64_intri_res;					\
+	asm ("popcnt %0=%1" : "=r" (ia64_intri_res) : "r" (x));	\
+								\
+	ia64_intri_res;						\
+})
+
+#define ia64_getf_exp(x)					\
+({								\
+	long ia64_intri_res;					\
+								\
+	asm ("getf.exp %0=%1" : "=r"(ia64_intri_res) : "f"(x));	\
+								\
+	ia64_intri_res;						\
+})
+
+#define ia64_shrp(a, b, count)								\
+({											\
+	__u64 ia64_intri_res;								\
+	asm ("shrp %0=%1,%2,%3" : "=r"(ia64_intri_res) : "r"(a), "r"(b), "i"(count));	\
+	ia64_intri_res;									\
+})
+
+#define ia64_ldfs(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfs %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldfd(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfd %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldfe(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfe %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldf8(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldf8 %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldf_fill(regnum, x)				\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldf.fill %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_stfs(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfs [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stfd(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfd [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stfe(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfe [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stf8(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stf8 [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stf_spill(x, regnum)						\
+({										\
+	register double __f__ asm ("f"#regnum);					\
+	asm volatile ("stf.spill [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_fetchadd4_acq(p, inc)						\
+({										\
+										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd4.acq %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd4_rel(p, inc)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd4.rel %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd8_acq(p, inc)						\
+({										\
+										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd8.acq %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd8_rel(p, inc)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd8.rel %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_xchg1(ptr,x)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("xchg1 %0=[%1],%2"					\
+		      : "=r" (ia64_intri_res) : "r" (ptr), "r" (x) : "memory");	\
+	ia64_intri_res;								\
+})
+
+#define ia64_xchg2(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg2 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_xchg4(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg4 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_xchg8(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg8 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_cmpxchg1_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg1.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg1_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg1.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg2_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg2.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg2_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+											\
+	asm volatile ("cmpxchg2.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg4_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg4.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg4_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg4.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg8_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg8.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg8_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+											\
+	asm volatile ("cmpxchg8.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_mf()	asm volatile ("mf" ::: "memory")
+#define ia64_mfa()	asm volatile ("mf.a" ::: "memory")
+
+#define ia64_invala() asm volatile ("invala" ::: "memory")
+
+#define ia64_thash(addr)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("thash %0=%1" : "=r"(ia64_intri_res) : "r" (addr));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_srlz_i()	asm volatile (";; srlz.i ;;" ::: "memory")
+#define ia64_srlz_d()	asm volatile (";; srlz.d" ::: "memory");
+
+#ifdef HAVE_SERIALIZE_DIRECTIVE
+# define ia64_dv_serialize_data()		asm volatile (".serialize.data");
+# define ia64_dv_serialize_instruction()	asm volatile (".serialize.instruction");
+#else
+# define ia64_dv_serialize_data()
+# define ia64_dv_serialize_instruction()
+#endif
+
+#define ia64_nop(x)	asm volatile ("nop %0"::"i"(x));
+
+#define ia64_itci(addr)	asm volatile ("itc.i %0;;" :: "r"(addr) : "memory")
+
+#define ia64_itcd(addr)	asm volatile ("itc.d %0;;" :: "r"(addr) : "memory")
+
+
+#define ia64_itri(trnum, addr) asm volatile ("itr.i itr[%0]=%1"				\
+					     :: "r"(trnum), "r"(addr) : "memory")
+
+#define ia64_itrd(trnum, addr) asm volatile ("itr.d dtr[%0]=%1"				\
+					     :: "r"(trnum), "r"(addr) : "memory")
+
+#define ia64_tpa(addr)								\
+({										\
+	__u64 ia64_pa;								\
+	asm volatile ("tpa %0 = %1" : "=r"(ia64_pa) : "r"(addr) : "memory");	\
+	ia64_pa;								\
+})
+
+#define __ia64_set_dbr(index, val)						\
+	asm volatile ("mov dbr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_ibr(index, val)						\
+	asm volatile ("mov ibr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pkr(index, val)						\
+	asm volatile ("mov pkr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pmc(index, val)						\
+	asm volatile ("mov pmc[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pmd(index, val)						\
+	asm volatile ("mov pmd[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_rr(index, val)							\
+	asm volatile ("mov rr[%0]=%1" :: "r"(index), "r"(val) : "memory");
+
+#define ia64_get_cpuid(index)								\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov %0=cpuid[%r1]" : "=r"(ia64_intri_res) : "rO"(index));	\
+	ia64_intri_res;									\
+})
+
+#define __ia64_get_dbr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=dbr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_ibr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=ibr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_pkr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=pkr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_pmc(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=pmc[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+
+#define ia64_get_pmd(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=pmd[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_rr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=rr[%1]" : "=r"(ia64_intri_res) : "r" (index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_fc(addr)	asm volatile ("fc %0" :: "r"(addr) : "memory")
+
+
+#define ia64_sync_i()	asm volatile (";; sync.i" ::: "memory")
+
+#define ia64_ssm(mask)	asm volatile ("ssm %0":: "i"((mask)) : "memory")
+#define ia64_rsm(mask)	asm volatile ("rsm %0":: "i"((mask)) : "memory")
+#define ia64_sum(mask)	asm volatile ("sum %0":: "i"((mask)) : "memory")
+#define ia64_rum(mask)	asm volatile ("rum %0":: "i"((mask)) : "memory")
+
+#define ia64_ptce(addr)	asm volatile ("ptc.e %0" :: "r"(addr))
+
+#define ia64_ptcga(addr, size)							\
+do {										\
+	asm volatile ("ptc.ga %0,%1" :: "r"(addr), "r"(size) : "memory");	\
+	ia64_dv_serialize_data();						\
+} while (0)
+
+#define ia64_ptcl(addr, size)							\
+do {										\
+	asm volatile ("ptc.l %0,%1" :: "r"(addr), "r"(size) : "memory");	\
+	ia64_dv_serialize_data();						\
+} while (0)
+
+#define ia64_ptri(addr, size)						\
+	asm volatile ("ptr.i %0,%1" :: "r"(addr), "r"(size) : "memory")
+
+#define ia64_ptrd(addr, size)						\
+	asm volatile ("ptr.d %0,%1" :: "r"(addr), "r"(size) : "memory")
+
+/* Values for lfhint in ia64_lfetch and ia64_lfetch_fault */
+
+#define ia64_lfhint_none   0
+#define ia64_lfhint_nt1    1
+#define ia64_lfhint_nt2    2
+#define ia64_lfhint_nta    3
+
+#define ia64_lfetch(lfhint, y)					\
+({								\
+        switch (lfhint) {					\
+        case ia64_lfhint_none:					\
+                asm volatile ("lfetch [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nt1:					\
+                asm volatile ("lfetch.nt1 [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nt2:					\
+                asm volatile ("lfetch.nt2 [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nta:					\
+                asm volatile ("lfetch.nta [%0]" : : "r"(y));	\
+                break;						\
+        }							\
+})
+
+#define ia64_lfetch_excl(lfhint, y)					\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.excl [%0]" :: "r"(y));		\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.excl.nt1 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.excl.nt2 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.excl.nta [%0]" :: "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_lfetch_fault(lfhint, y)					\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.fault [%0]" : : "r"(y));		\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.fault.nt1 [%0]" : : "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.fault.nt2 [%0]" : : "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.fault.nta [%0]" : : "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_lfetch_fault_excl(lfhint, y)				\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.fault.excl [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.fault.excl.nt1 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.fault.excl.nt2 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.fault.excl.nta [%0]" :: "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_intrin_local_irq_restore(x)			\
+do {								\
+	asm volatile (";;   cmp.ne p6,p7=%0,r0;;"		\
+		      "(p6) ssm psr.i;"				\
+		      "(p7) rsm psr.i;;"			\
+		      "(p6) srlz.d"				\
+		      :: "r"((x)) : "p6", "p7", "memory");	\
+} while (0)
+
+#endif /* _ASM_IA64_GCC_INTRIN_H */
diff --git a/include/asm-ia64/hardirq.h b/include/asm-ia64/hardirq.h
new file mode 100644
index 000000000000..33ef8f096d95
--- /dev/null
+++ b/include/asm-ia64/hardirq.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_HARDIRQ_H
+#define _ASM_IA64_HARDIRQ_H
+
+/*
+ * Modified 1998-2002, 2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+#include <asm/processor.h>
+
+/*
+ * No irq_cpustat_t for IA-64.  The data is held in the per-CPU data structure.
+ */
+
+#define __ARCH_IRQ_STAT	1
+
+#define local_softirq_pending()		(local_cpu_data->softirq_pending)
+
+#define HARDIRQ_BITS	14
+
+/*
+ * The hardirq mask has to be large enough to have space for potentially all IRQ sources
+ * in the system nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+extern void __iomem *ipi_base_addr;
+
+void ack_bad_irq(unsigned int irq);
+
+#endif /* _ASM_IA64_HARDIRQ_H */
diff --git a/include/asm-ia64/hdreg.h b/include/asm-ia64/hdreg.h
new file mode 100644
index 000000000000..83b5161d2678
--- /dev/null
+++ b/include/asm-ia64/hdreg.h
@@ -0,0 +1,14 @@
+/*
+ *  linux/include/asm-ia64/hdreg.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+#warning this file is obsolete, please do not use it
+
+#ifndef __ASM_IA64_HDREG_H
+#define __ASM_IA64_HDREG_H
+
+typedef unsigned short ide_ioreg_t;
+
+#endif /* __ASM_IA64_HDREG_H */
diff --git a/include/asm-ia64/hw_irq.h b/include/asm-ia64/hw_irq.h
new file mode 100644
index 000000000000..041ab8c51a64
--- /dev/null
+++ b/include/asm-ia64/hw_irq.h
@@ -0,0 +1,144 @@
+#ifndef _ASM_IA64_HW_IRQ_H
+#define _ASM_IA64_HW_IRQ_H
+
+/*
+ * Copyright (C) 2001-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/profile.h>
+
+#include <asm/machvec.h>
+#include <asm/ptrace.h>
+#include <asm/smp.h>
+
+typedef u8 ia64_vector;
+
+/*
+ * 0 special
+ *
+ * 1,3-14 are reserved from firmware
+ *
+ * 16-255 (vectored external interrupts) are available
+ *
+ * 15 spurious interrupt (see IVR)
+ *
+ * 16 lowest priority, 255 highest priority
+ *
+ * 15 classes of 16 interrupts each.
+ */
+#define IA64_MIN_VECTORED_IRQ		 16
+#define IA64_MAX_VECTORED_IRQ		255
+#define IA64_NUM_VECTORS		256
+
+#define AUTO_ASSIGN			-1
+
+#define IA64_SPURIOUS_INT_VECTOR	0x0f
+
+/*
+ * Vectors 0x10-0x1f are used for low priority interrupts, e.g. CMCI.
+ */
+#define IA64_CPEP_VECTOR		0x1c	/* corrected platform error polling vector */
+#define IA64_CMCP_VECTOR		0x1d	/* corrected machine-check polling vector */
+#define IA64_CPE_VECTOR			0x1e	/* corrected platform error interrupt vector */
+#define IA64_CMC_VECTOR			0x1f	/* corrected machine-check interrupt vector */
+/*
+ * Vectors 0x20-0x2f are reserved for legacy ISA IRQs.
+ */
+#define IA64_FIRST_DEVICE_VECTOR	0x30
+#define IA64_LAST_DEVICE_VECTOR		0xe7
+#define IA64_NUM_DEVICE_VECTORS		(IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1)
+
+#define IA64_MCA_RENDEZ_VECTOR		0xe8	/* MCA rendez interrupt */
+#define IA64_PERFMON_VECTOR		0xee	/* performanc monitor interrupt vector */
+#define IA64_TIMER_VECTOR		0xef	/* use highest-prio group 15 interrupt for timer */
+#define	IA64_MCA_WAKEUP_VECTOR		0xf0	/* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */
+#define IA64_IPI_RESCHEDULE		0xfd	/* SMP reschedule */
+#define IA64_IPI_VECTOR			0xfe	/* inter-processor interrupt vector */
+
+/* Used for encoding redirected irqs */
+
+#define IA64_IRQ_REDIRECTED		(1 << 31)
+
+/* IA64 inter-cpu interrupt related definitions */
+
+#define IA64_IPI_DEFAULT_BASE_ADDR	0xfee00000
+
+/* Delivery modes for inter-cpu interrupts */
+enum {
+        IA64_IPI_DM_INT =       0x0,    /* pend an external interrupt */
+        IA64_IPI_DM_PMI =       0x2,    /* pend a PMI */
+        IA64_IPI_DM_NMI =       0x4,    /* pend an NMI (vector 2) */
+        IA64_IPI_DM_INIT =      0x5,    /* pend an INIT interrupt */
+        IA64_IPI_DM_EXTINT =    0x7,    /* pend an 8259-compatible interrupt. */
+};
+
+extern __u8 isa_irq_to_vector_map[16];
+#define isa_irq_to_vector(x)	isa_irq_to_vector_map[(x)]
+
+extern struct hw_interrupt_type irq_type_ia64_lsapic;	/* CPU-internal interrupt controller */
+
+extern int assign_irq_vector (int irq);	/* allocate a free vector */
+extern void free_irq_vector (int vector);
+extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect);
+extern void register_percpu_irq (ia64_vector vec, struct irqaction *action);
+
+static inline void
+hw_resend_irq (struct hw_interrupt_type *h, unsigned int vector)
+{
+	platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0);
+}
+
+/*
+ * Default implementations for the irq-descriptor API:
+ */
+
+extern irq_desc_t irq_desc[NR_IRQS];
+
+#ifndef CONFIG_IA64_GENERIC
+static inline unsigned int
+__ia64_local_vector_to_irq (ia64_vector vec)
+{
+	return (unsigned int) vec;
+}
+#endif
+
+/*
+ * Next follows the irq descriptor interface.  On IA-64, each CPU supports 256 interrupt
+ * vectors.  On smaller systems, there is a one-to-one correspondence between interrupt
+ * vectors and the Linux irq numbers.  However, larger systems may have multiple interrupt
+ * domains meaning that the translation from vector number to irq number depends on the
+ * interrupt domain that a CPU belongs to.  This API abstracts such platform-dependent
+ * differences and provides a uniform means to translate between vector and irq numbers
+ * and to obtain the irq descriptor for a given irq number.
+ */
+
+/* Return a pointer to the irq descriptor for IRQ.  */
+static inline irq_desc_t *
+irq_descp (int irq)
+{
+	return irq_desc + irq;
+}
+
+/* Extract the IA-64 vector that corresponds to IRQ.  */
+static inline ia64_vector
+irq_to_vector (int irq)
+{
+	return (ia64_vector) irq;
+}
+
+/*
+ * Convert the local IA-64 vector to the corresponding irq number.  This translation is
+ * done in the context of the interrupt domain that the currently executing CPU belongs
+ * to.
+ */
+static inline unsigned int
+local_vector_to_irq (ia64_vector vec)
+{
+	return platform_local_vector_to_irq(vec);
+}
+
+#endif /* _ASM_IA64_HW_IRQ_H */
diff --git a/include/asm-ia64/ia32.h b/include/asm-ia64/ia32.h
new file mode 100644
index 000000000000..8e746b2413a6
--- /dev/null
+++ b/include/asm-ia64/ia32.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_IA32_H
+#define _ASM_IA64_IA32_H
+
+#include <linux/config.h>
+
+#include <asm/ptrace.h>
+#include <asm/signal.h>
+
+#define IA32_NR_syscalls		285	/* length of syscall table */
+#define IA32_PAGE_SHIFT			12	/* 4KB pages */
+
+#ifndef __ASSEMBLY__
+
+# ifdef CONFIG_IA32_SUPPORT
+
+extern void ia32_cpu_init (void);
+extern void ia32_mem_init (void);
+extern void ia32_gdt_init (void);
+extern int ia32_exception (struct pt_regs *regs, unsigned long isr);
+extern int ia32_intercept (struct pt_regs *regs, unsigned long isr);
+extern int ia32_clone_tls (struct task_struct *child, struct pt_regs *childregs);
+
+# endif /* !CONFIG_IA32_SUPPORT */
+
+/* Declare this unconditionally, so we don't get warnings for unreachable code.  */
+extern int ia32_setup_frame1 (int sig, struct k_sigaction *ka, siginfo_t *info,
+			      sigset_t *set, struct pt_regs *regs);
+#if PAGE_SHIFT > IA32_PAGE_SHIFT
+extern int ia32_copy_partial_page_list (struct task_struct *, unsigned long);
+extern void ia32_drop_partial_page_list (struct task_struct *);
+#else
+# define ia32_copy_partial_page_list(a1, a2)	0
+# define ia32_drop_partial_page_list(a1)	do { ; } while (0)
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_IA32_H */
diff --git a/include/asm-ia64/ia64regs.h b/include/asm-ia64/ia64regs.h
new file mode 100644
index 000000000000..1757f1c11ad4
--- /dev/null
+++ b/include/asm-ia64/ia64regs.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2002,2003 Intel Corp.
+ *      Jun Nakajima <jun.nakajima@intel.com>
+ *      Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+
+#ifndef _ASM_IA64_IA64REGS_H
+#define _ASM_IA64_IA64REGS_H
+
+/*
+ * Register Names for getreg() and setreg().
+ *
+ * The "magic" numbers happen to match the values used by the Intel compiler's
+ * getreg()/setreg() intrinsics.
+ */
+
+/* Special Registers */
+
+#define _IA64_REG_IP		1016	/* getreg only */
+#define _IA64_REG_PSR		1019
+#define _IA64_REG_PSR_L		1019
+
+/* General Integer Registers */
+
+#define _IA64_REG_GP		1025	/* R1 */
+#define _IA64_REG_R8		1032	/* R8 */
+#define _IA64_REG_R9		1033	/* R9 */
+#define _IA64_REG_SP		1036	/* R12 */
+#define _IA64_REG_TP		1037	/* R13 */
+
+/* Application Registers */
+
+#define _IA64_REG_AR_KR0	3072
+#define _IA64_REG_AR_KR1	3073
+#define _IA64_REG_AR_KR2	3074
+#define _IA64_REG_AR_KR3	3075
+#define _IA64_REG_AR_KR4	3076
+#define _IA64_REG_AR_KR5	3077
+#define _IA64_REG_AR_KR6	3078
+#define _IA64_REG_AR_KR7	3079
+#define _IA64_REG_AR_RSC	3088
+#define _IA64_REG_AR_BSP	3089
+#define _IA64_REG_AR_BSPSTORE	3090
+#define _IA64_REG_AR_RNAT	3091
+#define _IA64_REG_AR_FCR	3093
+#define _IA64_REG_AR_EFLAG	3096
+#define _IA64_REG_AR_CSD	3097
+#define _IA64_REG_AR_SSD	3098
+#define _IA64_REG_AR_CFLAG	3099
+#define _IA64_REG_AR_FSR	3100
+#define _IA64_REG_AR_FIR	3101
+#define _IA64_REG_AR_FDR	3102
+#define _IA64_REG_AR_CCV	3104
+#define _IA64_REG_AR_UNAT	3108
+#define _IA64_REG_AR_FPSR	3112
+#define _IA64_REG_AR_ITC	3116
+#define _IA64_REG_AR_PFS	3136
+#define _IA64_REG_AR_LC		3137
+#define _IA64_REG_AR_EC		3138
+
+/* Control Registers */
+
+#define _IA64_REG_CR_DCR	4096
+#define _IA64_REG_CR_ITM	4097
+#define _IA64_REG_CR_IVA	4098
+#define _IA64_REG_CR_PTA	4104
+#define _IA64_REG_CR_IPSR	4112
+#define _IA64_REG_CR_ISR	4113
+#define _IA64_REG_CR_IIP	4115
+#define _IA64_REG_CR_IFA	4116
+#define _IA64_REG_CR_ITIR	4117
+#define _IA64_REG_CR_IIPA	4118
+#define _IA64_REG_CR_IFS	4119
+#define _IA64_REG_CR_IIM	4120
+#define _IA64_REG_CR_IHA	4121
+#define _IA64_REG_CR_LID	4160
+#define _IA64_REG_CR_IVR	4161	/* getreg only */
+#define _IA64_REG_CR_TPR	4162
+#define _IA64_REG_CR_EOI	4163
+#define _IA64_REG_CR_IRR0	4164	/* getreg only */
+#define _IA64_REG_CR_IRR1	4165	/* getreg only */
+#define _IA64_REG_CR_IRR2	4166	/* getreg only */
+#define _IA64_REG_CR_IRR3	4167	/* getreg only */
+#define _IA64_REG_CR_ITV	4168
+#define _IA64_REG_CR_PMV	4169
+#define _IA64_REG_CR_CMCV	4170
+#define _IA64_REG_CR_LRR0	4176
+#define _IA64_REG_CR_LRR1	4177
+
+/* Indirect Registers for getindreg() and setindreg() */
+
+#define _IA64_REG_INDR_CPUID	9000	/* getindreg only */
+#define _IA64_REG_INDR_DBR	9001
+#define _IA64_REG_INDR_IBR	9002
+#define _IA64_REG_INDR_PKR	9003
+#define _IA64_REG_INDR_PMC	9004
+#define _IA64_REG_INDR_PMD	9005
+#define _IA64_REG_INDR_RR	9006
+
+#endif /* _ASM_IA64_IA64REGS_H */
diff --git a/include/asm-ia64/ide.h b/include/asm-ia64/ide.h
new file mode 100644
index 000000000000..e62b95301d51
--- /dev/null
+++ b/include/asm-ia64/ide.h
@@ -0,0 +1,71 @@
+/*
+ *  linux/include/asm-ia64/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the ia64 architecture specific IDE code.
+ */
+
+#ifndef __ASM_IA64_IDE_H
+#define __ASM_IA64_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#include <linux/irq.h>
+
+#ifndef MAX_HWIFS
+# ifdef CONFIG_PCI
+#define MAX_HWIFS	10
+# else
+#define MAX_HWIFS	6
+# endif
+#endif
+
+#define IDE_ARCH_OBSOLETE_DEFAULTS
+
+static inline int ide_default_irq(unsigned long base)
+{
+	switch (base) {
+	      case 0x1f0: return isa_irq_to_vector(14);
+	      case 0x170: return isa_irq_to_vector(15);
+	      case 0x1e8: return isa_irq_to_vector(11);
+	      case 0x168: return isa_irq_to_vector(10);
+	      case 0x1e0: return isa_irq_to_vector(8);
+	      case 0x160: return isa_irq_to_vector(12);
+	      default:
+		return 0;
+	}
+}
+
+static inline unsigned long ide_default_io_base(int index)
+{
+	switch (index) {
+	      case 0: return 0x1f0;
+	      case 1: return 0x170;
+	      case 2: return 0x1e8;
+	      case 3: return 0x168;
+	      case 4: return 0x1e0;
+	      case 5: return 0x160;
+	      default:
+		return 0;
+	}
+}
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base)	((base) + 0x206) /* obsolete */
+
+#ifdef CONFIG_PCI
+#define ide_init_default_irq(base)	(0)
+#else
+#define ide_init_default_irq(base)	ide_default_irq(base)
+#endif
+
+#include <asm-generic/ide_iops.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_IA64_IDE_H */
diff --git a/include/asm-ia64/intel_intrin.h b/include/asm-ia64/intel_intrin.h
new file mode 100644
index 000000000000..a7122d850177
--- /dev/null
+++ b/include/asm-ia64/intel_intrin.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_IA64_INTEL_INTRIN_H
+#define _ASM_IA64_INTEL_INTRIN_H
+/*
+ * Intel Compiler Intrinsics
+ *
+ * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
+ * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
+ *
+ */
+#include <asm/types.h>
+
+void  __lfetch(int lfhint, void *y);
+void  __lfetch_excl(int lfhint, void *y);
+void  __lfetch_fault(int lfhint, void *y);
+void  __lfetch_fault_excl(int lfhint, void *y);
+
+/* In the following, whichFloatReg should be an integer from 0-127 */
+void  __ldfs(const int whichFloatReg, void *src);
+void  __ldfd(const int whichFloatReg, void *src);
+void  __ldfe(const int whichFloatReg, void *src);
+void  __ldf8(const int whichFloatReg, void *src);
+void  __ldf_fill(const int whichFloatReg, void *src);
+void  __stfs(void *dst, const int whichFloatReg);
+void  __stfd(void *dst, const int whichFloatReg);
+void  __stfe(void *dst, const int whichFloatReg);
+void  __stf8(void *dst, const int whichFloatReg);
+void  __stf_spill(void *dst, const int whichFloatReg);
+
+void  __st1_rel(void *dst, const __s8  value);
+void  __st2_rel(void *dst, const __s16 value);
+void  __st4_rel(void *dst, const __s32 value);
+void  __st8_rel(void *dst, const __s64 value);
+__u8  __ld1_acq(void *src);
+__u16 __ld2_acq(void *src);
+__u32 __ld4_acq(void *src);
+__u64 __ld8_acq(void *src);
+
+__u64 __fetchadd4_acq(__u32 *addend, const int increment);
+__u64 __fetchadd4_rel(__u32 *addend, const int increment);
+__u64 __fetchadd8_acq(__u64 *addend, const int increment);
+__u64 __fetchadd8_rel(__u64 *addend, const int increment);
+
+__u64 __getf_exp(double d);
+
+/* OS Related Itanium(R) Intrinsics  */
+
+/* The names to use for whichReg and whichIndReg below come from
+   the include file asm/ia64regs.h */
+
+__u64 __getIndReg(const int whichIndReg, __s64 index);
+__u64 __getReg(const int whichReg);
+
+void  __setIndReg(const int whichIndReg, __s64 index, __u64 value);
+void  __setReg(const int whichReg, __u64 value);
+
+void  __mf(void);
+void  __mfa(void);
+void  __synci(void);
+void  __itcd(__s64 pa);
+void  __itci(__s64 pa);
+void  __itrd(__s64 whichTransReg, __s64 pa);
+void  __itri(__s64 whichTransReg, __s64 pa);
+void  __ptce(__s64 va);
+void  __ptcl(__s64 va, __s64 pagesz);
+void  __ptcg(__s64 va, __s64 pagesz);
+void  __ptcga(__s64 va, __s64 pagesz);
+void  __ptri(__s64 va, __s64 pagesz);
+void  __ptrd(__s64 va, __s64 pagesz);
+void  __invala (void);
+void  __invala_gr(const int whichGeneralReg /* 0-127 */ );
+void  __invala_fr(const int whichFloatReg /* 0-127 */ );
+void  __nop(const int);
+void  __fc(__u64 *addr);
+void  __sum(int mask);
+void  __rum(int mask);
+void  __ssm(int mask);
+void  __rsm(int mask);
+__u64 __thash(__s64);
+__u64 __ttag(__s64);
+__s64 __tpa(__s64);
+
+/* Intrinsics for implementing get/put_user macros */
+void __st_user(const char *tableName, __u64 addr, char size, char relocType, __u64 val);
+void __ld_user(const char *tableName, __u64 addr, char size, char relocType);
+
+/* This intrinsic does not generate code, it creates a barrier across which
+ * the compiler will not schedule data access instructions.
+ */
+void __memory_barrier(void);
+
+void __isrlz(void);
+void __dsrlz(void);
+
+__u64  _m64_mux1(__u64 a, const int n);
+__u64  __thash(__u64);
+
+/* Lock and Atomic Operation Related Intrinsics */
+__u64 _InterlockedExchange8(volatile __u8 *trgt, __u8 value);
+__u64 _InterlockedExchange16(volatile __u16 *trgt, __u16 value);
+__s64 _InterlockedExchange(volatile __u32 *trgt, __u32 value);
+__s64 _InterlockedExchange64(volatile __u64 *trgt, __u64 value);
+
+__u64 _InterlockedCompareExchange8_rel(volatile __u8 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange8_acq(volatile __u8 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange16_rel(volatile __u16 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange16_acq(volatile __u16 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange_rel(volatile __u32 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange_acq(volatile __u32 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange64_rel(volatile __u64 *dest, __u64 xchg, __u64 comp);
+__u64 _InterlockedCompareExchange64_acq(volatile __u64 *dest, __u64 xchg, __u64 comp);
+
+__s64 _m64_dep_mi(const int v, __s64 s, const int p, const int len);
+__s64 _m64_shrp(__s64 a, __s64 b, const int count);
+__s64 _m64_popcnt(__s64 a);
+
+#define ia64_barrier()		__memory_barrier()
+
+#define ia64_stop()	/* Nothing: As of now stop bit is generated for each
+		 	 * intrinsic
+		 	 */
+
+#define ia64_getreg		__getReg
+#define ia64_setreg		__setReg
+
+#define ia64_hint(x)
+
+#define ia64_mux1_brcst	 0
+#define ia64_mux1_mix		 8
+#define ia64_mux1_shuf		 9
+#define ia64_mux1_alt		10
+#define ia64_mux1_rev		11
+
+#define ia64_mux1		_m64_mux1
+#define ia64_popcnt		_m64_popcnt
+#define ia64_getf_exp		__getf_exp
+#define ia64_shrp		_m64_shrp
+
+#define ia64_tpa		__tpa
+#define ia64_invala		__invala
+#define ia64_invala_gr		__invala_gr
+#define ia64_invala_fr		__invala_fr
+#define ia64_nop		__nop
+#define ia64_sum		__sum
+#define ia64_ssm		__ssm
+#define ia64_rum		__rum
+#define ia64_rsm		__rsm
+#define ia64_fc 		__fc
+
+#define ia64_ldfs		__ldfs
+#define ia64_ldfd		__ldfd
+#define ia64_ldfe		__ldfe
+#define ia64_ldf8		__ldf8
+#define ia64_ldf_fill		__ldf_fill
+
+#define ia64_stfs		__stfs
+#define ia64_stfd		__stfd
+#define ia64_stfe		__stfe
+#define ia64_stf8		__stf8
+#define ia64_stf_spill		__stf_spill
+
+#define ia64_mf		__mf
+#define ia64_mfa		__mfa
+
+#define ia64_fetchadd4_acq	__fetchadd4_acq
+#define ia64_fetchadd4_rel	__fetchadd4_rel
+#define ia64_fetchadd8_acq	__fetchadd8_acq
+#define ia64_fetchadd8_rel	__fetchadd8_rel
+
+#define ia64_xchg1		_InterlockedExchange8
+#define ia64_xchg2		_InterlockedExchange16
+#define ia64_xchg4		_InterlockedExchange
+#define ia64_xchg8		_InterlockedExchange64
+
+#define ia64_cmpxchg1_rel	_InterlockedCompareExchange8_rel
+#define ia64_cmpxchg1_acq	_InterlockedCompareExchange8_acq
+#define ia64_cmpxchg2_rel	_InterlockedCompareExchange16_rel
+#define ia64_cmpxchg2_acq	_InterlockedCompareExchange16_acq
+#define ia64_cmpxchg4_rel	_InterlockedCompareExchange_rel
+#define ia64_cmpxchg4_acq	_InterlockedCompareExchange_acq
+#define ia64_cmpxchg8_rel	_InterlockedCompareExchange64_rel
+#define ia64_cmpxchg8_acq	_InterlockedCompareExchange64_acq
+
+#define __ia64_set_dbr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_DBR, index, val)
+#define ia64_set_ibr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_IBR, index, val)
+#define ia64_set_pkr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_PKR, index, val)
+#define ia64_set_pmc(index, val)	\
+		__setIndReg(_IA64_REG_INDR_PMC, index, val)
+#define ia64_set_pmd(index, val)	\
+		__setIndReg(_IA64_REG_INDR_PMD, index, val)
+#define ia64_set_rr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_RR, index, val)
+
+#define ia64_get_cpuid(index) 	__getIndReg(_IA64_REG_INDR_CPUID, index)
+#define __ia64_get_dbr(index) 	__getIndReg(_IA64_REG_INDR_DBR, index)
+#define ia64_get_ibr(index) 	__getIndReg(_IA64_REG_INDR_IBR, index)
+#define ia64_get_pkr(index) 	__getIndReg(_IA64_REG_INDR_PKR, index)
+#define ia64_get_pmc(index) 	__getIndReg(_IA64_REG_INDR_PMC, index)
+#define ia64_get_pmd(index)  	__getIndReg(_IA64_REG_INDR_PMD, index)
+#define ia64_get_rr(index) 	__getIndReg(_IA64_REG_INDR_RR, index)
+
+#define ia64_srlz_d		__dsrlz
+#define ia64_srlz_i		__isrlz
+
+#define ia64_dv_serialize_data()
+#define ia64_dv_serialize_instruction()
+
+#define ia64_st1_rel		__st1_rel
+#define ia64_st2_rel		__st2_rel
+#define ia64_st4_rel		__st4_rel
+#define ia64_st8_rel		__st8_rel
+
+#define ia64_ld1_acq		__ld1_acq
+#define ia64_ld2_acq		__ld2_acq
+#define ia64_ld4_acq		__ld4_acq
+#define ia64_ld8_acq		__ld8_acq
+
+#define ia64_sync_i		__synci
+#define ia64_thash		__thash
+#define ia64_ttag		__ttag
+#define ia64_itcd		__itcd
+#define ia64_itci		__itci
+#define ia64_itrd		__itrd
+#define ia64_itri		__itri
+#define ia64_ptce		__ptce
+#define ia64_ptcl		__ptcl
+#define ia64_ptcg		__ptcg
+#define ia64_ptcga		__ptcga
+#define ia64_ptri		__ptri
+#define ia64_ptrd		__ptrd
+#define ia64_dep_mi		_m64_dep_mi
+
+/* Values for lfhint in __lfetch and __lfetch_fault */
+
+#define ia64_lfhint_none   	0
+#define ia64_lfhint_nt1    	1
+#define ia64_lfhint_nt2    	2
+#define ia64_lfhint_nta    	3
+
+#define ia64_lfetch		__lfetch
+#define ia64_lfetch_excl	__lfetch_excl
+#define ia64_lfetch_fault	__lfetch_fault
+#define ia64_lfetch_fault_excl	__lfetch_fault_excl
+
+#define ia64_intrin_local_irq_restore(x)		\
+do {							\
+	if ((x) != 0) {					\
+		ia64_ssm(IA64_PSR_I);			\
+		ia64_srlz_d();				\
+	} else {					\
+		ia64_rsm(IA64_PSR_I);			\
+	}						\
+} while (0)
+
+#endif /* _ASM_IA64_INTEL_INTRIN_H */
diff --git a/include/asm-ia64/intrinsics.h b/include/asm-ia64/intrinsics.h
new file mode 100644
index 000000000000..8089f955e5d2
--- /dev/null
+++ b/include/asm-ia64/intrinsics.h
@@ -0,0 +1,181 @@
+#ifndef _ASM_IA64_INTRINSICS_H
+#define _ASM_IA64_INTRINSICS_H
+
+/*
+ * Compiler-dependent intrinsics.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/config.h>
+
+/* include compiler specific intrinsics */
+#include <asm/ia64regs.h>
+#ifdef __INTEL_COMPILER
+# include <asm/intel_intrin.h>
+#else
+# include <asm/gcc_intrin.h>
+#endif
+
+/*
+ * Force an unresolved reference if someone tries to use
+ * ia64_fetch_and_add() with a bad value.
+ */
+extern unsigned long __bad_size_for_ia64_fetch_and_add (void);
+extern unsigned long __bad_increment_for_ia64_fetch_and_add (void);
+
+#define IA64_FETCHADD(tmp,v,n,sz,sem)						\
+({										\
+	switch (sz) {								\
+	      case 4:								\
+	        tmp = ia64_fetchadd4_##sem((unsigned int *) v, n);		\
+		break;								\
+										\
+	      case 8:								\
+	        tmp = ia64_fetchadd8_##sem((unsigned long *) v, n);		\
+		break;								\
+										\
+	      default:								\
+		__bad_size_for_ia64_fetch_and_add();				\
+	}									\
+})
+
+#define ia64_fetchadd(i,v,sem)								\
+({											\
+	__u64 _tmp;									\
+	volatile __typeof__(*(v)) *_v = (v);						\
+	/* Can't use a switch () here: gcc isn't always smart enough for that... */	\
+	if ((i) == -16)									\
+		IA64_FETCHADD(_tmp, _v, -16, sizeof(*(v)), sem);			\
+	else if ((i) == -8)								\
+		IA64_FETCHADD(_tmp, _v, -8, sizeof(*(v)), sem);				\
+	else if ((i) == -4)								\
+		IA64_FETCHADD(_tmp, _v, -4, sizeof(*(v)), sem);				\
+	else if ((i) == -1)								\
+		IA64_FETCHADD(_tmp, _v, -1, sizeof(*(v)), sem);				\
+	else if ((i) == 1)								\
+		IA64_FETCHADD(_tmp, _v, 1, sizeof(*(v)), sem);				\
+	else if ((i) == 4)								\
+		IA64_FETCHADD(_tmp, _v, 4, sizeof(*(v)), sem);				\
+	else if ((i) == 8)								\
+		IA64_FETCHADD(_tmp, _v, 8, sizeof(*(v)), sem);				\
+	else if ((i) == 16)								\
+		IA64_FETCHADD(_tmp, _v, 16, sizeof(*(v)), sem);				\
+	else										\
+		_tmp = __bad_increment_for_ia64_fetch_and_add();			\
+	(__typeof__(*(v))) (_tmp);	/* return old value */				\
+})
+
+#define ia64_fetch_and_add(i,v)	(ia64_fetchadd(i, v, rel) + (i)) /* return new value */
+
+/*
+ * This function doesn't exist, so you'll get a linker error if
+ * something tries to do an invalid xchg().
+ */
+extern void ia64_xchg_called_with_bad_pointer (void);
+
+#define __xchg(x,ptr,size)						\
+({									\
+	unsigned long __xchg_result;					\
+									\
+	switch (size) {							\
+	      case 1:							\
+		__xchg_result = ia64_xchg1((__u8 *)ptr, x);		\
+		break;							\
+									\
+	      case 2:							\
+		__xchg_result = ia64_xchg2((__u16 *)ptr, x);		\
+		break;							\
+									\
+	      case 4:							\
+		__xchg_result = ia64_xchg4((__u32 *)ptr, x);		\
+		break;							\
+									\
+	      case 8:							\
+		__xchg_result = ia64_xchg8((__u64 *)ptr, x);		\
+		break;							\
+	      default:							\
+		ia64_xchg_called_with_bad_pointer();			\
+	}								\
+	__xchg_result;							\
+})
+
+#define xchg(ptr,x)							     \
+  ((__typeof__(*(ptr))) __xchg ((unsigned long) (x), (ptr), sizeof(*(ptr))))
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg().
+ */
+extern long ia64_cmpxchg_called_with_bad_pointer (void);
+
+#define ia64_cmpxchg(sem,ptr,old,new,size)						\
+({											\
+	__u64 _o_, _r_;									\
+											\
+	switch (size) {									\
+	      case 1: _o_ = (__u8 ) (long) (old); break;				\
+	      case 2: _o_ = (__u16) (long) (old); break;				\
+	      case 4: _o_ = (__u32) (long) (old); break;				\
+	      case 8: _o_ = (__u64) (long) (old); break;				\
+	      default: break;								\
+	}										\
+	switch (size) {									\
+	      case 1:									\
+	      	_r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      case 2:									\
+	       _r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      case 4:									\
+	      	_r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      case 8:									\
+		_r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      default:									\
+		_r_ = ia64_cmpxchg_called_with_bad_pointer();				\
+		break;									\
+	}										\
+	(__typeof__(old)) _r_;								\
+})
+
+#define cmpxchg_acq(ptr,o,n)	ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
+#define cmpxchg_rel(ptr,o,n)	ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
+
+/* for compatibility with other platforms: */
+#define cmpxchg(ptr,o,n)	cmpxchg_acq(ptr,o,n)
+
+#ifdef CONFIG_IA64_DEBUG_CMPXCHG
+# define CMPXCHG_BUGCHECK_DECL	int _cmpxchg_bugcheck_count = 128;
+# define CMPXCHG_BUGCHECK(v)							\
+  do {										\
+	if (_cmpxchg_bugcheck_count-- <= 0) {					\
+		void *ip;							\
+		extern int printk(const char *fmt, ...);			\
+		ip = (void *) ia64_getreg(_IA64_REG_IP);			\
+		printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v));	\
+		break;								\
+	}									\
+  } while (0)
+#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
+# define CMPXCHG_BUGCHECK_DECL
+# define CMPXCHG_BUGCHECK(v)
+#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
+
+#endif
+#endif /* _ASM_IA64_INTRINSICS_H */
diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h
new file mode 100644
index 000000000000..491e9d1fc538
--- /dev/null
+++ b/include/asm-ia64/io.h
@@ -0,0 +1,484 @@
+#ifndef _ASM_IA64_IO_H
+#define _ASM_IA64_IO_H
+
+/*
+ * This file contains the definitions for the emulated IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated to
+ * (a) handle it all in a way that makes gcc able to optimize it as
+ * well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+/* We don't use IO slowdowns on the ia64, but.. */
+#define __SLOW_DOWN_IO	do { } while (0)
+#define SLOW_DOWN_IO	do { } while (0)
+
+#define __IA64_UNCACHED_OFFSET	0xc000000000000000UL	/* region 6 */
+
+/*
+ * The legacy I/O space defined by the ia64 architecture supports only 65536 ports, but
+ * large machines may have multiple other I/O spaces so we can't place any a priori limit
+ * on IO_SPACE_LIMIT.  These additional spaces are described in ACPI.
+ */
+#define IO_SPACE_LIMIT		0xffffffffffffffffUL
+
+#define MAX_IO_SPACES_BITS		4
+#define MAX_IO_SPACES			(1UL << MAX_IO_SPACES_BITS)
+#define IO_SPACE_BITS			24
+#define IO_SPACE_SIZE			(1UL << IO_SPACE_BITS)
+
+#define IO_SPACE_NR(port)		((port) >> IO_SPACE_BITS)
+#define IO_SPACE_BASE(space)		((space) << IO_SPACE_BITS)
+#define IO_SPACE_PORT(port)		((port) & (IO_SPACE_SIZE - 1))
+
+#define IO_SPACE_SPARSE_ENCODING(p)	((((p) >> 2) << 12) | (p & 0xfff))
+
+struct io_space {
+	unsigned long mmio_base;	/* base in MMIO space */
+	int sparse;
+};
+
+extern struct io_space io_space[];
+extern unsigned int num_io_spaces;
+
+# ifdef __KERNEL__
+
+/*
+ * All MMIO iomem cookies are in region 6; anything less is a PIO cookie:
+ *	0xCxxxxxxxxxxxxxxx	MMIO cookie (return from ioremap)
+ *	0x000000001SPPPPPP	PIO cookie (S=space number, P..P=port)
+ *
+ * ioread/writeX() uses the leading 1 in PIO cookies (PIO_OFFSET) to catch
+ * code that uses bare port numbers without the prerequisite pci_iomap().
+ */
+#define PIO_OFFSET		(1UL << (MAX_IO_SPACES_BITS + IO_SPACE_BITS))
+#define PIO_MASK		(PIO_OFFSET - 1)
+#define PIO_RESERVED		__IA64_UNCACHED_OFFSET
+#define HAVE_ARCH_PIO_SIZE
+
+#include <asm/intrinsics.h>
+#include <asm/machvec.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm-generic/iomap.h>
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ */
+static inline unsigned long
+virt_to_phys (volatile void *address)
+{
+	return (unsigned long) address - PAGE_OFFSET;
+}
+
+static inline void*
+phys_to_virt (unsigned long address)
+{
+	return (void *) (address + PAGE_OFFSET);
+}
+
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+extern int valid_phys_addr_range (unsigned long addr, size_t *count); /* efi.c */
+
+/*
+ * The following two macros are deprecated and scheduled for removal.
+ * Please use the PCI-DMA interface defined in <asm/pci.h> instead.
+ */
+#define bus_to_virt	phys_to_virt
+#define virt_to_bus	virt_to_phys
+#define page_to_bus	page_to_phys
+
+# endif /* KERNEL */
+
+/*
+ * Memory fence w/accept.  This should never be used in code that is
+ * not IA-64 specific.
+ */
+#define __ia64_mf_a()	ia64_mfa()
+
+/**
+ * ___ia64_mmiowb - I/O write barrier
+ *
+ * Ensure ordering of I/O space writes.  This will make sure that writes
+ * following the barrier will arrive after all previous writes.  For most
+ * ia64 platforms, this is a simple 'mf.a' instruction.
+ *
+ * See Documentation/DocBook/deviceiobook.tmpl for more information.
+ */
+static inline void ___ia64_mmiowb(void)
+{
+	ia64_mfa();
+}
+
+static inline const unsigned long
+__ia64_get_io_port_base (void)
+{
+	extern unsigned long ia64_iobase;
+
+	return ia64_iobase;
+}
+
+static inline void*
+__ia64_mk_io_addr (unsigned long port)
+{
+	struct io_space *space;
+	unsigned long offset;
+
+	space = &io_space[IO_SPACE_NR(port)];
+	port = IO_SPACE_PORT(port);
+	if (space->sparse)
+		offset = IO_SPACE_SPARSE_ENCODING(port);
+	else
+		offset = port;
+
+	return (void *) (space->mmio_base | offset);
+}
+
+#define __ia64_inb	___ia64_inb
+#define __ia64_inw	___ia64_inw
+#define __ia64_inl	___ia64_inl
+#define __ia64_outb	___ia64_outb
+#define __ia64_outw	___ia64_outw
+#define __ia64_outl	___ia64_outl
+#define __ia64_readb	___ia64_readb
+#define __ia64_readw	___ia64_readw
+#define __ia64_readl	___ia64_readl
+#define __ia64_readq	___ia64_readq
+#define __ia64_readb_relaxed	___ia64_readb
+#define __ia64_readw_relaxed	___ia64_readw
+#define __ia64_readl_relaxed	___ia64_readl
+#define __ia64_readq_relaxed	___ia64_readq
+#define __ia64_writeb	___ia64_writeb
+#define __ia64_writew	___ia64_writew
+#define __ia64_writel	___ia64_writel
+#define __ia64_writeq	___ia64_writeq
+#define __ia64_mmiowb	___ia64_mmiowb
+
+/*
+ * For the in/out routines, we need to do "mf.a" _after_ doing the I/O access to ensure
+ * that the access has completed before executing other I/O accesses.  Since we're doing
+ * the accesses through an uncachable (UC) translation, the CPU will execute them in
+ * program order.  However, we still need to tell the compiler not to shuffle them around
+ * during optimization, which is why we use "volatile" pointers.
+ */
+
+static inline unsigned int
+___ia64_inb (unsigned long port)
+{
+	volatile unsigned char *addr = __ia64_mk_io_addr(port);
+	unsigned char ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+___ia64_inw (unsigned long port)
+{
+	volatile unsigned short *addr = __ia64_mk_io_addr(port);
+	unsigned short ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+___ia64_inl (unsigned long port)
+{
+	volatile unsigned int *addr = __ia64_mk_io_addr(port);
+	unsigned int ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline void
+___ia64_outb (unsigned char val, unsigned long port)
+{
+	volatile unsigned char *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+___ia64_outw (unsigned short val, unsigned long port)
+{
+	volatile unsigned short *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+___ia64_outl (unsigned int val, unsigned long port)
+{
+	volatile unsigned int *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+__insb (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned char *dp = dst;
+
+	while (count--)
+		*dp++ = platform_inb(port);
+}
+
+static inline void
+__insw (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned short *dp = dst;
+
+	while (count--)
+		*dp++ = platform_inw(port);
+}
+
+static inline void
+__insl (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned int *dp = dst;
+
+	while (count--)
+		*dp++ = platform_inl(port);
+}
+
+static inline void
+__outsb (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned char *sp = src;
+
+	while (count--)
+		platform_outb(*sp++, port);
+}
+
+static inline void
+__outsw (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned short *sp = src;
+
+	while (count--)
+		platform_outw(*sp++, port);
+}
+
+static inline void
+__outsl (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned int *sp = src;
+
+	while (count--)
+		platform_outl(*sp++, port);
+}
+
+/*
+ * Unfortunately, some platforms are broken and do not follow the IA-64 architecture
+ * specification regarding legacy I/O support.  Thus, we have to make these operations
+ * platform dependent...
+ */
+#define __inb		platform_inb
+#define __inw		platform_inw
+#define __inl		platform_inl
+#define __outb		platform_outb
+#define __outw		platform_outw
+#define __outl		platform_outl
+#define __mmiowb	platform_mmiowb
+
+#define inb(p)		__inb(p)
+#define inw(p)		__inw(p)
+#define inl(p)		__inl(p)
+#define insb(p,d,c)	__insb(p,d,c)
+#define insw(p,d,c)	__insw(p,d,c)
+#define insl(p,d,c)	__insl(p,d,c)
+#define outb(v,p)	__outb(v,p)
+#define outw(v,p)	__outw(v,p)
+#define outl(v,p)	__outl(v,p)
+#define outsb(p,s,c)	__outsb(p,s,c)
+#define outsw(p,s,c)	__outsw(p,s,c)
+#define outsl(p,s,c)	__outsl(p,s,c)
+#define mmiowb()	__mmiowb()
+
+/*
+ * The address passed to these functions are ioremap()ped already.
+ *
+ * We need these to be machine vectors since some platforms don't provide
+ * DMA coherence via PIO reads (PCI drivers and the spec imply that this is
+ * a good idea).  Writes are ok though for all existing ia64 platforms (and
+ * hopefully it'll stay that way).
+ */
+static inline unsigned char
+___ia64_readb (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short
+___ia64_readw (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned int
+___ia64_readl (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *) addr;
+}
+
+static inline unsigned long
+___ia64_readq (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long __force *) addr;
+}
+
+static inline void
+__writeb (unsigned char val, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *) addr = val;
+}
+
+static inline void
+__writew (unsigned short val, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *) addr = val;
+}
+
+static inline void
+__writel (unsigned int val, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *) addr = val;
+}
+
+static inline void
+__writeq (unsigned long val, volatile void __iomem *addr)
+{
+	*(volatile unsigned long __force *) addr = val;
+}
+
+#define __readb		platform_readb
+#define __readw		platform_readw
+#define __readl		platform_readl
+#define __readq		platform_readq
+#define __readb_relaxed	platform_readb_relaxed
+#define __readw_relaxed	platform_readw_relaxed
+#define __readl_relaxed	platform_readl_relaxed
+#define __readq_relaxed	platform_readq_relaxed
+
+#define readb(a)	__readb((a))
+#define readw(a)	__readw((a))
+#define readl(a)	__readl((a))
+#define readq(a)	__readq((a))
+#define readb_relaxed(a)	__readb_relaxed((a))
+#define readw_relaxed(a)	__readw_relaxed((a))
+#define readl_relaxed(a)	__readl_relaxed((a))
+#define readq_relaxed(a)	__readq_relaxed((a))
+#define __raw_readb	readb
+#define __raw_readw	readw
+#define __raw_readl	readl
+#define __raw_readq	readq
+#define __raw_readb_relaxed	readb_relaxed
+#define __raw_readw_relaxed	readw_relaxed
+#define __raw_readl_relaxed	readl_relaxed
+#define __raw_readq_relaxed	readq_relaxed
+#define writeb(v,a)	__writeb((v), (a))
+#define writew(v,a)	__writew((v), (a))
+#define writel(v,a)	__writel((v), (a))
+#define writeq(v,a)	__writeq((v), (a))
+#define __raw_writeb	writeb
+#define __raw_writew	writew
+#define __raw_writel	writel
+#define __raw_writeq	writeq
+
+#ifndef inb_p
+# define inb_p		inb
+#endif
+#ifndef inw_p
+# define inw_p		inw
+#endif
+#ifndef inl_p
+# define inl_p		inl
+#endif
+
+#ifndef outb_p
+# define outb_p		outb
+#endif
+#ifndef outw_p
+# define outw_p		outw
+#endif
+#ifndef outl_p
+# define outl_p		outl
+#endif
+
+/*
+ * An "address" in IO memory space is not clearly either an integer or a pointer. We will
+ * accept both, thus the casts.
+ *
+ * On ia-64, we access the physical I/O memory space through the uncached kernel region.
+ */
+static inline void __iomem *
+ioremap (unsigned long offset, unsigned long size)
+{
+	return (void __iomem *) (__IA64_UNCACHED_OFFSET | (offset));
+}
+
+static inline void
+iounmap (volatile void __iomem *addr)
+{
+}
+
+#define ioremap_nocache(o,s)	ioremap(o,s)
+
+# ifdef __KERNEL__
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void memcpy_fromio(void *dst, const volatile void __iomem *src, long n);
+extern void memcpy_toio(volatile void __iomem *dst, const void *src, long n);
+extern void memset_io(volatile void __iomem *s, int c, long n);
+
+#define dma_cache_inv(_start,_size)             do { } while (0)
+#define dma_cache_wback(_start,_size)           do { } while (0)
+#define dma_cache_wback_inv(_start,_size)       do { } while (0)
+
+# endif /* __KERNEL__ */
+
+/*
+ * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing.  It is said that
+ * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64).
+ * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on
+ * SPECweb-like workloads on zx1-based machines.  Thus, for now we favor I/O MMU bypassing
+ * over BIO-level virtual merging.
+ */
+extern unsigned long ia64_max_iommu_merge_mask;
+#if 1
+#define BIO_VMERGE_BOUNDARY	0
+#else
+/*
+ * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here.  Should be
+ * replaced by dma_merge_mask() or something of that sort.  Note: the only way
+ * BIO_VMERGE_BOUNDARY is used is to mask off bits.  Effectively, our definition gets
+ * expanded into:
+ *
+ *	addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask)
+ *
+ * which is precisely what we want.
+ */
+#define BIO_VMERGE_BOUNDARY	(ia64_max_iommu_merge_mask + 1)
+#endif
+
+#endif /* _ASM_IA64_IO_H */
diff --git a/include/asm-ia64/ioctl.h b/include/asm-ia64/ioctl.h
new file mode 100644
index 000000000000..be9cc2403d2a
--- /dev/null
+++ b/include/asm-ia64/ioctl.h
@@ -0,0 +1,77 @@
+#ifndef _ASM_IA64_IOCTL_H
+#define _ASM_IA64_IOCTL_H
+
+/*
+ * Based on <asm-i386/ioctl.h>.
+ *
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The ia64 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASM_IA64_IOCTL_H */
diff --git a/include/asm-ia64/ioctl32.h b/include/asm-ia64/ioctl32.h
new file mode 100644
index 000000000000..d0d227f45e05
--- /dev/null
+++ b/include/asm-ia64/ioctl32.h
@@ -0,0 +1 @@
+#include <linux/ioctl32.h>
diff --git a/include/asm-ia64/ioctls.h b/include/asm-ia64/ioctls.h
new file mode 100644
index 000000000000..31ee521aeb7a
--- /dev/null
+++ b/include/asm-ia64/ioctls.h
@@ -0,0 +1,89 @@
+#ifndef _ASM_IA64_IOCTLS_H
+#define _ASM_IA64_IOCTLS_H
+
+/*
+ * Based on <asm-i386/ioctls.h>
+ *
+ * Modified 1998, 1999, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402	/* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* _ASM_IA64_IOCTLS_H */
diff --git a/include/asm-ia64/iosapic.h b/include/asm-ia64/iosapic.h
new file mode 100644
index 000000000000..38a7a72791cc
--- /dev/null
+++ b/include/asm-ia64/iosapic.h
@@ -0,0 +1,110 @@
+#ifndef __ASM_IA64_IOSAPIC_H
+#define __ASM_IA64_IOSAPIC_H
+
+#define	IOSAPIC_REG_SELECT	0x0
+#define	IOSAPIC_WINDOW		0x10
+#define	IOSAPIC_EOI		0x40
+
+#define	IOSAPIC_VERSION		0x1
+
+/*
+ * Redirection table entry
+ */
+#define	IOSAPIC_RTE_LOW(i)	(0x10+i*2)
+#define	IOSAPIC_RTE_HIGH(i)	(0x11+i*2)
+
+#define	IOSAPIC_DEST_SHIFT		16
+
+/*
+ * Delivery mode
+ */
+#define	IOSAPIC_DELIVERY_SHIFT		8
+#define	IOSAPIC_FIXED			0x0
+#define	IOSAPIC_LOWEST_PRIORITY	0x1
+#define	IOSAPIC_PMI			0x2
+#define	IOSAPIC_NMI			0x4
+#define	IOSAPIC_INIT			0x5
+#define	IOSAPIC_EXTINT			0x7
+
+/*
+ * Interrupt polarity
+ */
+#define	IOSAPIC_POLARITY_SHIFT		13
+#define	IOSAPIC_POL_HIGH		0
+#define	IOSAPIC_POL_LOW		1
+
+/*
+ * Trigger mode
+ */
+#define	IOSAPIC_TRIGGER_SHIFT		15
+#define	IOSAPIC_EDGE			0
+#define	IOSAPIC_LEVEL			1
+
+/*
+ * Mask bit
+ */
+
+#define	IOSAPIC_MASK_SHIFT		16
+#define	IOSAPIC_MASK			(1<<IOSAPIC_MASK_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_IOSAPIC
+
+#define NR_IOSAPICS			256
+
+static inline unsigned int iosapic_read(char __iomem *iosapic, unsigned int reg)
+{
+	writel(reg, iosapic + IOSAPIC_REG_SELECT);
+	return readl(iosapic + IOSAPIC_WINDOW);
+}
+
+static inline void iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+{
+	writel(reg, iosapic + IOSAPIC_REG_SELECT);
+	writel(val, iosapic + IOSAPIC_WINDOW);
+}
+
+static inline void iosapic_eoi(char __iomem *iosapic, u32 vector)
+{
+	writel(vector, iosapic + IOSAPIC_EOI);
+}
+
+extern void __init iosapic_system_init (int pcat_compat);
+extern void __init iosapic_init (unsigned long address,
+				    unsigned int gsi_base);
+extern int gsi_to_vector (unsigned int gsi);
+extern int gsi_to_irq (unsigned int gsi);
+extern void iosapic_enable_intr (unsigned int vector);
+extern int iosapic_register_intr (unsigned int gsi, unsigned long polarity,
+				  unsigned long trigger);
+#ifdef CONFIG_ACPI_DEALLOCATE_IRQ
+extern void iosapic_unregister_intr (unsigned int irq);
+#endif
+extern void __init iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
+				      unsigned long polarity,
+				      unsigned long trigger);
+extern int __init iosapic_register_platform_intr (u32 int_type,
+					   unsigned int gsi,
+					   int pmi_vector,
+					   u16 eid, u16 id,
+					   unsigned long polarity,
+					   unsigned long trigger);
+extern unsigned int iosapic_version (char __iomem *addr);
+
+extern void iosapic_pci_fixup (int);
+#ifdef CONFIG_NUMA
+extern void __init map_iosapic_to_node (unsigned int, int);
+#endif
+#else
+#define iosapic_system_init(pcat_compat)			do { } while (0)
+#define iosapic_init(address,gsi_base)				do { } while (0)
+#define iosapic_register_intr(gsi,polarity,trigger)		(gsi)
+#define iosapic_unregister_intr(irq)				do { } while (0)
+#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger)	do { } while (0)
+#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \
+	polarity,trigger)					(gsi)
+#endif
+
+# endif /* !__ASSEMBLY__ */
+#endif /* __ASM_IA64_IOSAPIC_H */
diff --git a/include/asm-ia64/ipcbuf.h b/include/asm-ia64/ipcbuf.h
new file mode 100644
index 000000000000..079899ae7d32
--- /dev/null
+++ b/include/asm-ia64/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IA64_IPCBUF_H
+#define _ASM_IA64_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned short	seq;
+	unsigned short	__pad1;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_IA64_IPCBUF_H */
diff --git a/include/asm-ia64/irq.h b/include/asm-ia64/irq.h
new file mode 100644
index 000000000000..bd07d11d9f37
--- /dev/null
+++ b/include/asm-ia64/irq.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_IA64_IRQ_H
+#define _ASM_IA64_IRQ_H
+
+/*
+ * Copyright (C) 1999-2000, 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * 11/24/98	S.Eranian 	updated TIMER_IRQ and irq_canonicalize
+ * 01/20/99	S.Eranian	added keyboard interrupt
+ * 02/29/00     D.Mosberger	moved most things into hw_irq.h
+ */
+
+#define NR_IRQS		256
+#define NR_IRQ_VECTORS	NR_IRQS
+
+static __inline__ int
+irq_canonicalize (int irq)
+{
+	/*
+	 * We do the legacy thing here of pretending that irqs < 16
+	 * are 8259 irqs.  This really shouldn't be necessary at all,
+	 * but we keep it here as serial.c still uses it...
+	 */
+	return ((irq == 2) ? 9 : irq);
+}
+
+extern void disable_irq (unsigned int);
+extern void disable_irq_nosync (unsigned int);
+extern void enable_irq (unsigned int);
+extern void set_irq_affinity_info (unsigned int irq, int dest, int redir);
+
+#ifdef CONFIG_SMP
+extern void move_irq(int irq);
+#else
+#define move_irq(irq)
+#endif
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* _ASM_IA64_IRQ_H */
diff --git a/include/asm-ia64/kmap_types.h b/include/asm-ia64/kmap_types.h
new file mode 100644
index 000000000000..bc777525fa12
--- /dev/null
+++ b/include/asm-ia64/kmap_types.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_IA64_KMAP_TYPES_H
+#define _ASM_IA64_KMAP_TYPES_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif /* _ASM_IA64_KMAP_TYPES_H */
diff --git a/include/asm-ia64/kregs.h b/include/asm-ia64/kregs.h
new file mode 100644
index 000000000000..221b5cb564b2
--- /dev/null
+++ b/include/asm-ia64/kregs.h
@@ -0,0 +1,163 @@
+#ifndef _ASM_IA64_KREGS_H
+#define _ASM_IA64_KREGS_H
+
+/*
+ * Copyright (C) 2001-2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * This file defines the kernel register usage convention used by Linux/ia64.
+ */
+
+/*
+ * Kernel registers:
+ */
+#define IA64_KR_IO_BASE		0	/* ar.k0: legacy I/O base address */
+#define IA64_KR_TSSD		1	/* ar.k1: IVE uses this as the TSSD */
+#define IA64_KR_PER_CPU_DATA	3	/* ar.k3: physical per-CPU base */
+#define IA64_KR_CURRENT_STACK	4	/* ar.k4: what's mapped in IA64_TR_CURRENT_STACK */
+#define IA64_KR_FPU_OWNER	5	/* ar.k5: fpu-owner (UP only, at the moment) */
+#define IA64_KR_CURRENT		6	/* ar.k6: "current" task pointer */
+#define IA64_KR_PT_BASE		7	/* ar.k7: page table base address (physical) */
+
+#define _IA64_KR_PASTE(x,y)	x##y
+#define _IA64_KR_PREFIX(n)	_IA64_KR_PASTE(ar.k, n)
+#define IA64_KR(n)		_IA64_KR_PREFIX(IA64_KR_##n)
+
+/*
+ * Translation registers:
+ */
+#define IA64_TR_KERNEL		0	/* itr0, dtr0: maps kernel image (code & data) */
+#define IA64_TR_PALCODE		1	/* itr1: maps PALcode as required by EFI */
+#define IA64_TR_PERCPU_DATA	1	/* dtr1: percpu data */
+#define IA64_TR_CURRENT_STACK	2	/* dtr2: maps kernel's memory- & register-stacks */
+
+/* Processor status register bits: */
+#define IA64_PSR_BE_BIT		1
+#define IA64_PSR_UP_BIT		2
+#define IA64_PSR_AC_BIT		3
+#define IA64_PSR_MFL_BIT	4
+#define IA64_PSR_MFH_BIT	5
+#define IA64_PSR_IC_BIT		13
+#define IA64_PSR_I_BIT		14
+#define IA64_PSR_PK_BIT		15
+#define IA64_PSR_DT_BIT		17
+#define IA64_PSR_DFL_BIT	18
+#define IA64_PSR_DFH_BIT	19
+#define IA64_PSR_SP_BIT		20
+#define IA64_PSR_PP_BIT		21
+#define IA64_PSR_DI_BIT		22
+#define IA64_PSR_SI_BIT		23
+#define IA64_PSR_DB_BIT		24
+#define IA64_PSR_LP_BIT		25
+#define IA64_PSR_TB_BIT		26
+#define IA64_PSR_RT_BIT		27
+/* The following are not affected by save_flags()/restore_flags(): */
+#define IA64_PSR_CPL0_BIT	32
+#define IA64_PSR_CPL1_BIT	33
+#define IA64_PSR_IS_BIT		34
+#define IA64_PSR_MC_BIT		35
+#define IA64_PSR_IT_BIT		36
+#define IA64_PSR_ID_BIT		37
+#define IA64_PSR_DA_BIT		38
+#define IA64_PSR_DD_BIT		39
+#define IA64_PSR_SS_BIT		40
+#define IA64_PSR_RI_BIT		41
+#define IA64_PSR_ED_BIT		43
+#define IA64_PSR_BN_BIT		44
+#define IA64_PSR_IA_BIT		45
+
+/* A mask of PSR bits that we generally don't want to inherit across a clone2() or an
+   execve().  Only list flags here that need to be cleared/set for BOTH clone2() and
+   execve().  */
+#define IA64_PSR_BITS_TO_CLEAR	(IA64_PSR_MFL | IA64_PSR_MFH | IA64_PSR_DB | IA64_PSR_LP | \
+				 IA64_PSR_TB  | IA64_PSR_ID  | IA64_PSR_DA | IA64_PSR_DD | \
+				 IA64_PSR_SS  | IA64_PSR_ED  | IA64_PSR_IA)
+#define IA64_PSR_BITS_TO_SET	(IA64_PSR_DFH | IA64_PSR_SP)
+
+#define IA64_PSR_BE	(__IA64_UL(1) << IA64_PSR_BE_BIT)
+#define IA64_PSR_UP	(__IA64_UL(1) << IA64_PSR_UP_BIT)
+#define IA64_PSR_AC	(__IA64_UL(1) << IA64_PSR_AC_BIT)
+#define IA64_PSR_MFL	(__IA64_UL(1) << IA64_PSR_MFL_BIT)
+#define IA64_PSR_MFH	(__IA64_UL(1) << IA64_PSR_MFH_BIT)
+#define IA64_PSR_IC	(__IA64_UL(1) << IA64_PSR_IC_BIT)
+#define IA64_PSR_I	(__IA64_UL(1) << IA64_PSR_I_BIT)
+#define IA64_PSR_PK	(__IA64_UL(1) << IA64_PSR_PK_BIT)
+#define IA64_PSR_DT	(__IA64_UL(1) << IA64_PSR_DT_BIT)
+#define IA64_PSR_DFL	(__IA64_UL(1) << IA64_PSR_DFL_BIT)
+#define IA64_PSR_DFH	(__IA64_UL(1) << IA64_PSR_DFH_BIT)
+#define IA64_PSR_SP	(__IA64_UL(1) << IA64_PSR_SP_BIT)
+#define IA64_PSR_PP	(__IA64_UL(1) << IA64_PSR_PP_BIT)
+#define IA64_PSR_DI	(__IA64_UL(1) << IA64_PSR_DI_BIT)
+#define IA64_PSR_SI	(__IA64_UL(1) << IA64_PSR_SI_BIT)
+#define IA64_PSR_DB	(__IA64_UL(1) << IA64_PSR_DB_BIT)
+#define IA64_PSR_LP	(__IA64_UL(1) << IA64_PSR_LP_BIT)
+#define IA64_PSR_TB	(__IA64_UL(1) << IA64_PSR_TB_BIT)
+#define IA64_PSR_RT	(__IA64_UL(1) << IA64_PSR_RT_BIT)
+/* The following are not affected by save_flags()/restore_flags(): */
+#define IA64_PSR_CPL	(__IA64_UL(3) << IA64_PSR_CPL0_BIT)
+#define IA64_PSR_IS	(__IA64_UL(1) << IA64_PSR_IS_BIT)
+#define IA64_PSR_MC	(__IA64_UL(1) << IA64_PSR_MC_BIT)
+#define IA64_PSR_IT	(__IA64_UL(1) << IA64_PSR_IT_BIT)
+#define IA64_PSR_ID	(__IA64_UL(1) << IA64_PSR_ID_BIT)
+#define IA64_PSR_DA	(__IA64_UL(1) << IA64_PSR_DA_BIT)
+#define IA64_PSR_DD	(__IA64_UL(1) << IA64_PSR_DD_BIT)
+#define IA64_PSR_SS	(__IA64_UL(1) << IA64_PSR_SS_BIT)
+#define IA64_PSR_RI	(__IA64_UL(3) << IA64_PSR_RI_BIT)
+#define IA64_PSR_ED	(__IA64_UL(1) << IA64_PSR_ED_BIT)
+#define IA64_PSR_BN	(__IA64_UL(1) << IA64_PSR_BN_BIT)
+#define IA64_PSR_IA	(__IA64_UL(1) << IA64_PSR_IA_BIT)
+
+/* User mask bits: */
+#define IA64_PSR_UM	(IA64_PSR_BE | IA64_PSR_UP | IA64_PSR_AC | IA64_PSR_MFL | IA64_PSR_MFH)
+
+/* Default Control Register */
+#define IA64_DCR_PP_BIT		 0	/* privileged performance monitor default */
+#define IA64_DCR_BE_BIT		 1	/* big-endian default */
+#define IA64_DCR_LC_BIT		 2	/* ia32 lock-check enable */
+#define IA64_DCR_DM_BIT		 8	/* defer TLB miss faults */
+#define IA64_DCR_DP_BIT		 9	/* defer page-not-present faults */
+#define IA64_DCR_DK_BIT		10	/* defer key miss faults */
+#define IA64_DCR_DX_BIT		11	/* defer key permission faults */
+#define IA64_DCR_DR_BIT		12	/* defer access right faults */
+#define IA64_DCR_DA_BIT		13	/* defer access bit faults */
+#define IA64_DCR_DD_BIT		14	/* defer debug faults */
+
+#define IA64_DCR_PP	(__IA64_UL(1) << IA64_DCR_PP_BIT)
+#define IA64_DCR_BE	(__IA64_UL(1) << IA64_DCR_BE_BIT)
+#define IA64_DCR_LC	(__IA64_UL(1) << IA64_DCR_LC_BIT)
+#define IA64_DCR_DM	(__IA64_UL(1) << IA64_DCR_DM_BIT)
+#define IA64_DCR_DP	(__IA64_UL(1) << IA64_DCR_DP_BIT)
+#define IA64_DCR_DK	(__IA64_UL(1) << IA64_DCR_DK_BIT)
+#define IA64_DCR_DX	(__IA64_UL(1) << IA64_DCR_DX_BIT)
+#define IA64_DCR_DR	(__IA64_UL(1) << IA64_DCR_DR_BIT)
+#define IA64_DCR_DA	(__IA64_UL(1) << IA64_DCR_DA_BIT)
+#define IA64_DCR_DD	(__IA64_UL(1) << IA64_DCR_DD_BIT)
+
+/* Interrupt Status Register */
+#define IA64_ISR_X_BIT		32	/* execute access */
+#define IA64_ISR_W_BIT		33	/* write access */
+#define IA64_ISR_R_BIT		34	/* read access */
+#define IA64_ISR_NA_BIT		35	/* non-access */
+#define IA64_ISR_SP_BIT		36	/* speculative load exception */
+#define IA64_ISR_RS_BIT		37	/* mandatory register-stack exception */
+#define IA64_ISR_IR_BIT		38	/* invalid register frame exception */
+#define IA64_ISR_CODE_MASK	0xf
+
+#define IA64_ISR_X	(__IA64_UL(1) << IA64_ISR_X_BIT)
+#define IA64_ISR_W	(__IA64_UL(1) << IA64_ISR_W_BIT)
+#define IA64_ISR_R	(__IA64_UL(1) << IA64_ISR_R_BIT)
+#define IA64_ISR_NA	(__IA64_UL(1) << IA64_ISR_NA_BIT)
+#define IA64_ISR_SP	(__IA64_UL(1) << IA64_ISR_SP_BIT)
+#define IA64_ISR_RS	(__IA64_UL(1) << IA64_ISR_RS_BIT)
+#define IA64_ISR_IR	(__IA64_UL(1) << IA64_ISR_IR_BIT)
+
+/* ISR code field for non-access instructions */
+#define IA64_ISR_CODE_TPA	0
+#define IA64_ISR_CODE_FC	1
+#define IA64_ISR_CODE_PROBE	2
+#define IA64_ISR_CODE_TAK	3
+#define IA64_ISR_CODE_LFETCH	4
+#define IA64_ISR_CODE_PROBEF	5
+
+#endif /* _ASM_IA64_kREGS_H */
diff --git a/include/asm-ia64/linkage.h b/include/asm-ia64/linkage.h
new file mode 100644
index 000000000000..14cd72cd8007
--- /dev/null
+++ b/include/asm-ia64/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define asmlinkage CPP_ASMLINKAGE __attribute__((syscall_linkage))
+
+#endif
diff --git a/include/asm-ia64/local.h b/include/asm-ia64/local.h
new file mode 100644
index 000000000000..1dbd584ad851
--- /dev/null
+++ b/include/asm-ia64/local.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_IA64_LOCAL_H
+#define _ASM_IA64_LOCAL_H
+
+/*
+ * Copyright (C) 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/percpu.h>
+
+typedef struct {
+	atomic64_t val;
+} local_t;
+
+#define LOCAL_INIT(i)	((local_t) { { (i) } })
+#define local_read(l)	atomic64_read(&(l)->val)
+#define local_set(l, i)	atomic64_set(&(l)->val, i)
+#define local_inc(l)	atomic64_inc(&(l)->val)
+#define local_dec(l)	atomic64_dec(&(l)->val)
+#define local_add(l)	atomic64_add(&(l)->val)
+#define local_sub(l)	atomic64_sub(&(l)->val)
+
+/* Non-atomic variants, i.e., preemption disabled and won't be touched in interrupt, etc.  */
+
+#define __local_inc(l)		(++(l)->val.counter)
+#define __local_dec(l)		(--(l)->val.counter)
+#define __local_add(i,l)	((l)->val.counter += (i))
+#define __local_sub(i,l)	((l)->val.counter -= (i))
+
+/*
+ * Use these for per-cpu local_t variables.  Note they take a variable (eg. mystruct.foo),
+ * not an address.
+ */
+#define cpu_local_read(v)	local_read(&__ia64_per_cpu_var(v))
+#define cpu_local_set(v, i)	local_set(&__ia64_per_cpu_var(v), (i))
+#define cpu_local_inc(v)	local_inc(&__ia64_per_cpu_var(v))
+#define cpu_local_dec(v)	local_dec(&__ia64_per_cpu_var(v))
+#define cpu_local_add(i, v)	local_add((i), &__ia64_per_cpu_var(v))
+#define cpu_local_sub(i, v)	local_sub((i), &__ia64_per_cpu_var(v))
+
+/*
+ * Non-atomic increments, i.e., preemption disabled and won't be touched in interrupt,
+ * etc.
+ */
+#define __cpu_local_inc(v)	__local_inc(&__ia64_per_cpu_var(v))
+#define __cpu_local_dec(v)	__local_dec(&__ia64_per_cpu_var(v))
+#define __cpu_local_add(i, v)	__local_add((i), &__ia64_per_cpu_var(v))
+#define __cpu_local_sub(i, v)	__local_sub((i), &__ia64_per_cpu_var(v))
+
+#endif /* _ASM_IA64_LOCAL_H */
diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h
new file mode 100644
index 000000000000..79e89a7db566
--- /dev/null
+++ b/include/asm-ia64/machvec.h
@@ -0,0 +1,390 @@
+/*
+ * Machine vector for IA-64.
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
+ * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
+ * Copyright (C) 1999-2001, 2003-2004 Hewlett-Packard Co.
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef _ASM_IA64_MACHVEC_H
+#define _ASM_IA64_MACHVEC_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+/* forward declarations: */
+struct device;
+struct pt_regs;
+struct scatterlist;
+struct page;
+struct mm_struct;
+struct pci_bus;
+
+typedef void ia64_mv_setup_t (char **);
+typedef void ia64_mv_cpu_init_t (void);
+typedef void ia64_mv_irq_init_t (void);
+typedef void ia64_mv_send_ipi_t (int, int, int, int);
+typedef void ia64_mv_timer_interrupt_t (int, void *, struct pt_regs *);
+typedef void ia64_mv_global_tlb_purge_t (unsigned long, unsigned long, unsigned long);
+typedef void ia64_mv_tlb_migrate_finish_t (struct mm_struct *);
+typedef unsigned int ia64_mv_local_vector_to_irq (u8);
+typedef char *ia64_mv_pci_get_legacy_mem_t (struct pci_bus *);
+typedef int ia64_mv_pci_legacy_read_t (struct pci_bus *, u16 port, u32 *val,
+				       u8 size);
+typedef int ia64_mv_pci_legacy_write_t (struct pci_bus *, u16 port, u32 val,
+					u8 size);
+
+/* DMA-mapping interface: */
+typedef void ia64_mv_dma_init (void);
+typedef void *ia64_mv_dma_alloc_coherent (struct device *, size_t, dma_addr_t *, int);
+typedef void ia64_mv_dma_free_coherent (struct device *, size_t, void *, dma_addr_t);
+typedef dma_addr_t ia64_mv_dma_map_single (struct device *, void *, size_t, int);
+typedef void ia64_mv_dma_unmap_single (struct device *, dma_addr_t, size_t, int);
+typedef int ia64_mv_dma_map_sg (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_unmap_sg (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_sync_single_for_cpu (struct device *, dma_addr_t, size_t, int);
+typedef void ia64_mv_dma_sync_sg_for_cpu (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_sync_single_for_device (struct device *, dma_addr_t, size_t, int);
+typedef void ia64_mv_dma_sync_sg_for_device (struct device *, struct scatterlist *, int, int);
+typedef int ia64_mv_dma_mapping_error (dma_addr_t dma_addr);
+typedef int ia64_mv_dma_supported (struct device *, u64);
+
+/*
+ * WARNING: The legacy I/O space is _architected_.  Platforms are
+ * expected to follow this architected model (see Section 10.7 in the
+ * IA-64 Architecture Software Developer's Manual).  Unfortunately,
+ * some broken machines do not follow that model, which is why we have
+ * to make the inX/outX operations part of the machine vector.
+ * Platform designers should follow the architected model whenever
+ * possible.
+ */
+typedef unsigned int ia64_mv_inb_t (unsigned long);
+typedef unsigned int ia64_mv_inw_t (unsigned long);
+typedef unsigned int ia64_mv_inl_t (unsigned long);
+typedef void ia64_mv_outb_t (unsigned char, unsigned long);
+typedef void ia64_mv_outw_t (unsigned short, unsigned long);
+typedef void ia64_mv_outl_t (unsigned int, unsigned long);
+typedef void ia64_mv_mmiowb_t (void);
+typedef unsigned char ia64_mv_readb_t (const volatile void __iomem *);
+typedef unsigned short ia64_mv_readw_t (const volatile void __iomem *);
+typedef unsigned int ia64_mv_readl_t (const volatile void __iomem *);
+typedef unsigned long ia64_mv_readq_t (const volatile void __iomem *);
+typedef unsigned char ia64_mv_readb_relaxed_t (const volatile void __iomem *);
+typedef unsigned short ia64_mv_readw_relaxed_t (const volatile void __iomem *);
+typedef unsigned int ia64_mv_readl_relaxed_t (const volatile void __iomem *);
+typedef unsigned long ia64_mv_readq_relaxed_t (const volatile void __iomem *);
+
+static inline void
+machvec_noop (void)
+{
+}
+
+static inline void
+machvec_noop_mm (struct mm_struct *mm)
+{
+}
+
+extern void machvec_setup (char **);
+extern void machvec_timer_interrupt (int, void *, struct pt_regs *);
+extern void machvec_dma_sync_single (struct device *, dma_addr_t, size_t, int);
+extern void machvec_dma_sync_sg (struct device *, struct scatterlist *, int, int);
+extern void machvec_tlb_migrate_finish (struct mm_struct *);
+
+# if defined (CONFIG_IA64_HP_SIM)
+#  include <asm/machvec_hpsim.h>
+# elif defined (CONFIG_IA64_DIG)
+#  include <asm/machvec_dig.h>
+# elif defined (CONFIG_IA64_HP_ZX1)
+#  include <asm/machvec_hpzx1.h>
+# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
+#  include <asm/machvec_hpzx1_swiotlb.h>
+# elif defined (CONFIG_IA64_SGI_SN2)
+#  include <asm/machvec_sn2.h>
+# elif defined (CONFIG_IA64_GENERIC)
+
+# ifdef MACHVEC_PLATFORM_HEADER
+#  include MACHVEC_PLATFORM_HEADER
+# else
+#  define platform_name		ia64_mv.name
+#  define platform_setup	ia64_mv.setup
+#  define platform_cpu_init	ia64_mv.cpu_init
+#  define platform_irq_init	ia64_mv.irq_init
+#  define platform_send_ipi	ia64_mv.send_ipi
+#  define platform_timer_interrupt	ia64_mv.timer_interrupt
+#  define platform_global_tlb_purge	ia64_mv.global_tlb_purge
+#  define platform_tlb_migrate_finish	ia64_mv.tlb_migrate_finish
+#  define platform_dma_init		ia64_mv.dma_init
+#  define platform_dma_alloc_coherent	ia64_mv.dma_alloc_coherent
+#  define platform_dma_free_coherent	ia64_mv.dma_free_coherent
+#  define platform_dma_map_single	ia64_mv.dma_map_single
+#  define platform_dma_unmap_single	ia64_mv.dma_unmap_single
+#  define platform_dma_map_sg		ia64_mv.dma_map_sg
+#  define platform_dma_unmap_sg		ia64_mv.dma_unmap_sg
+#  define platform_dma_sync_single_for_cpu ia64_mv.dma_sync_single_for_cpu
+#  define platform_dma_sync_sg_for_cpu	ia64_mv.dma_sync_sg_for_cpu
+#  define platform_dma_sync_single_for_device ia64_mv.dma_sync_single_for_device
+#  define platform_dma_sync_sg_for_device ia64_mv.dma_sync_sg_for_device
+#  define platform_dma_mapping_error		ia64_mv.dma_mapping_error
+#  define platform_dma_supported	ia64_mv.dma_supported
+#  define platform_local_vector_to_irq	ia64_mv.local_vector_to_irq
+#  define platform_pci_get_legacy_mem	ia64_mv.pci_get_legacy_mem
+#  define platform_pci_legacy_read	ia64_mv.pci_legacy_read
+#  define platform_pci_legacy_write	ia64_mv.pci_legacy_write
+#  define platform_inb		ia64_mv.inb
+#  define platform_inw		ia64_mv.inw
+#  define platform_inl		ia64_mv.inl
+#  define platform_outb		ia64_mv.outb
+#  define platform_outw		ia64_mv.outw
+#  define platform_outl		ia64_mv.outl
+#  define platform_mmiowb	ia64_mv.mmiowb
+#  define platform_readb        ia64_mv.readb
+#  define platform_readw        ia64_mv.readw
+#  define platform_readl        ia64_mv.readl
+#  define platform_readq        ia64_mv.readq
+#  define platform_readb_relaxed        ia64_mv.readb_relaxed
+#  define platform_readw_relaxed        ia64_mv.readw_relaxed
+#  define platform_readl_relaxed        ia64_mv.readl_relaxed
+#  define platform_readq_relaxed        ia64_mv.readq_relaxed
+# endif
+
+/* __attribute__((__aligned__(16))) is required to make size of the
+ * structure multiple of 16 bytes.
+ * This will fillup the holes created because of section 3.3.1 in
+ * Software Conventions guide.
+ */
+struct ia64_machine_vector {
+	const char *name;
+	ia64_mv_setup_t *setup;
+	ia64_mv_cpu_init_t *cpu_init;
+	ia64_mv_irq_init_t *irq_init;
+	ia64_mv_send_ipi_t *send_ipi;
+	ia64_mv_timer_interrupt_t *timer_interrupt;
+	ia64_mv_global_tlb_purge_t *global_tlb_purge;
+	ia64_mv_tlb_migrate_finish_t *tlb_migrate_finish;
+	ia64_mv_dma_init *dma_init;
+	ia64_mv_dma_alloc_coherent *dma_alloc_coherent;
+	ia64_mv_dma_free_coherent *dma_free_coherent;
+	ia64_mv_dma_map_single *dma_map_single;
+	ia64_mv_dma_unmap_single *dma_unmap_single;
+	ia64_mv_dma_map_sg *dma_map_sg;
+	ia64_mv_dma_unmap_sg *dma_unmap_sg;
+	ia64_mv_dma_sync_single_for_cpu *dma_sync_single_for_cpu;
+	ia64_mv_dma_sync_sg_for_cpu *dma_sync_sg_for_cpu;
+	ia64_mv_dma_sync_single_for_device *dma_sync_single_for_device;
+	ia64_mv_dma_sync_sg_for_device *dma_sync_sg_for_device;
+	ia64_mv_dma_mapping_error *dma_mapping_error;
+	ia64_mv_dma_supported *dma_supported;
+	ia64_mv_local_vector_to_irq *local_vector_to_irq;
+	ia64_mv_pci_get_legacy_mem_t *pci_get_legacy_mem;
+	ia64_mv_pci_legacy_read_t *pci_legacy_read;
+	ia64_mv_pci_legacy_write_t *pci_legacy_write;
+	ia64_mv_inb_t *inb;
+	ia64_mv_inw_t *inw;
+	ia64_mv_inl_t *inl;
+	ia64_mv_outb_t *outb;
+	ia64_mv_outw_t *outw;
+	ia64_mv_outl_t *outl;
+	ia64_mv_mmiowb_t *mmiowb;
+	ia64_mv_readb_t *readb;
+	ia64_mv_readw_t *readw;
+	ia64_mv_readl_t *readl;
+	ia64_mv_readq_t *readq;
+	ia64_mv_readb_relaxed_t *readb_relaxed;
+	ia64_mv_readw_relaxed_t *readw_relaxed;
+	ia64_mv_readl_relaxed_t *readl_relaxed;
+	ia64_mv_readq_relaxed_t *readq_relaxed;
+} __attribute__((__aligned__(16))); /* align attrib? see above comment */
+
+#define MACHVEC_INIT(name)			\
+{						\
+	#name,					\
+	platform_setup,				\
+	platform_cpu_init,			\
+	platform_irq_init,			\
+	platform_send_ipi,			\
+	platform_timer_interrupt,		\
+	platform_global_tlb_purge,		\
+	platform_tlb_migrate_finish,		\
+	platform_dma_init,			\
+	platform_dma_alloc_coherent,		\
+	platform_dma_free_coherent,		\
+	platform_dma_map_single,		\
+	platform_dma_unmap_single,		\
+	platform_dma_map_sg,			\
+	platform_dma_unmap_sg,			\
+	platform_dma_sync_single_for_cpu,	\
+	platform_dma_sync_sg_for_cpu,		\
+	platform_dma_sync_single_for_device,	\
+	platform_dma_sync_sg_for_device,	\
+	platform_dma_mapping_error,			\
+	platform_dma_supported,			\
+	platform_local_vector_to_irq,		\
+	platform_pci_get_legacy_mem,		\
+	platform_pci_legacy_read,		\
+	platform_pci_legacy_write,		\
+	platform_inb,				\
+	platform_inw,				\
+	platform_inl,				\
+	platform_outb,				\
+	platform_outw,				\
+	platform_outl,				\
+	platform_mmiowb,			\
+	platform_readb,				\
+	platform_readw,				\
+	platform_readl,				\
+	platform_readq,				\
+	platform_readb_relaxed,			\
+	platform_readw_relaxed,			\
+	platform_readl_relaxed,			\
+	platform_readq_relaxed,			\
+}
+
+extern struct ia64_machine_vector ia64_mv;
+extern void machvec_init (const char *name);
+
+# else
+#  error Unknown configuration.  Update asm-ia64/machvec.h.
+# endif /* CONFIG_IA64_GENERIC */
+
+/*
+ * Declare default routines which aren't declared anywhere else:
+ */
+extern ia64_mv_dma_init			swiotlb_init;
+extern ia64_mv_dma_alloc_coherent	swiotlb_alloc_coherent;
+extern ia64_mv_dma_free_coherent	swiotlb_free_coherent;
+extern ia64_mv_dma_map_single		swiotlb_map_single;
+extern ia64_mv_dma_unmap_single		swiotlb_unmap_single;
+extern ia64_mv_dma_map_sg		swiotlb_map_sg;
+extern ia64_mv_dma_unmap_sg		swiotlb_unmap_sg;
+extern ia64_mv_dma_sync_single_for_cpu	swiotlb_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu	swiotlb_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device swiotlb_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device	swiotlb_sync_sg_for_device;
+extern ia64_mv_dma_mapping_error	swiotlb_dma_mapping_error;
+extern ia64_mv_dma_supported		swiotlb_dma_supported;
+
+/*
+ * Define default versions so we can extend machvec for new platforms without having
+ * to update the machvec files for all existing platforms.
+ */
+#ifndef platform_setup
+# define platform_setup			machvec_setup
+#endif
+#ifndef platform_cpu_init
+# define platform_cpu_init		machvec_noop
+#endif
+#ifndef platform_irq_init
+# define platform_irq_init		machvec_noop
+#endif
+
+#ifndef platform_send_ipi
+# define platform_send_ipi		ia64_send_ipi	/* default to architected version */
+#endif
+#ifndef platform_timer_interrupt
+# define platform_timer_interrupt 	machvec_timer_interrupt
+#endif
+#ifndef platform_global_tlb_purge
+# define platform_global_tlb_purge	ia64_global_tlb_purge /* default to architected version */
+#endif
+#ifndef platform_tlb_migrate_finish
+# define platform_tlb_migrate_finish	machvec_noop_mm
+#endif
+#ifndef platform_dma_init
+# define platform_dma_init		swiotlb_init
+#endif
+#ifndef platform_dma_alloc_coherent
+# define platform_dma_alloc_coherent	swiotlb_alloc_coherent
+#endif
+#ifndef platform_dma_free_coherent
+# define platform_dma_free_coherent	swiotlb_free_coherent
+#endif
+#ifndef platform_dma_map_single
+# define platform_dma_map_single	swiotlb_map_single
+#endif
+#ifndef platform_dma_unmap_single
+# define platform_dma_unmap_single	swiotlb_unmap_single
+#endif
+#ifndef platform_dma_map_sg
+# define platform_dma_map_sg		swiotlb_map_sg
+#endif
+#ifndef platform_dma_unmap_sg
+# define platform_dma_unmap_sg		swiotlb_unmap_sg
+#endif
+#ifndef platform_dma_sync_single_for_cpu
+# define platform_dma_sync_single_for_cpu	swiotlb_sync_single_for_cpu
+#endif
+#ifndef platform_dma_sync_sg_for_cpu
+# define platform_dma_sync_sg_for_cpu		swiotlb_sync_sg_for_cpu
+#endif
+#ifndef platform_dma_sync_single_for_device
+# define platform_dma_sync_single_for_device	swiotlb_sync_single_for_device
+#endif
+#ifndef platform_dma_sync_sg_for_device
+# define platform_dma_sync_sg_for_device	swiotlb_sync_sg_for_device
+#endif
+#ifndef platform_dma_mapping_error
+# define platform_dma_mapping_error		swiotlb_dma_mapping_error
+#endif
+#ifndef platform_dma_supported
+# define  platform_dma_supported	swiotlb_dma_supported
+#endif
+#ifndef platform_local_vector_to_irq
+# define platform_local_vector_to_irq	__ia64_local_vector_to_irq
+#endif
+#ifndef platform_pci_get_legacy_mem
+# define platform_pci_get_legacy_mem	ia64_pci_get_legacy_mem
+#endif
+#ifndef platform_pci_legacy_read
+# define platform_pci_legacy_read	ia64_pci_legacy_read
+#endif
+#ifndef platform_pci_legacy_write
+# define platform_pci_legacy_write	ia64_pci_legacy_write
+#endif
+#ifndef platform_inb
+# define platform_inb		__ia64_inb
+#endif
+#ifndef platform_inw
+# define platform_inw		__ia64_inw
+#endif
+#ifndef platform_inl
+# define platform_inl		__ia64_inl
+#endif
+#ifndef platform_outb
+# define platform_outb		__ia64_outb
+#endif
+#ifndef platform_outw
+# define platform_outw		__ia64_outw
+#endif
+#ifndef platform_outl
+# define platform_outl		__ia64_outl
+#endif
+#ifndef platform_mmiowb
+# define platform_mmiowb	__ia64_mmiowb
+#endif
+#ifndef platform_readb
+# define platform_readb		__ia64_readb
+#endif
+#ifndef platform_readw
+# define platform_readw		__ia64_readw
+#endif
+#ifndef platform_readl
+# define platform_readl		__ia64_readl
+#endif
+#ifndef platform_readq
+# define platform_readq		__ia64_readq
+#endif
+#ifndef platform_readb_relaxed
+# define platform_readb_relaxed	__ia64_readb_relaxed
+#endif
+#ifndef platform_readw_relaxed
+# define platform_readw_relaxed	__ia64_readw_relaxed
+#endif
+#ifndef platform_readl_relaxed
+# define platform_readl_relaxed	__ia64_readl_relaxed
+#endif
+#ifndef platform_readq_relaxed
+# define platform_readq_relaxed	__ia64_readq_relaxed
+#endif
+
+#endif /* _ASM_IA64_MACHVEC_H */
diff --git a/include/asm-ia64/machvec_dig.h b/include/asm-ia64/machvec_dig.h
new file mode 100644
index 000000000000..4dc8522c974f
--- /dev/null
+++ b/include/asm-ia64/machvec_dig.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_IA64_MACHVEC_DIG_h
+#define _ASM_IA64_MACHVEC_DIG_h
+
+extern ia64_mv_setup_t dig_setup;
+extern ia64_mv_irq_init_t dig_irq_init;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name		"dig"
+#define platform_setup		dig_setup
+#define platform_irq_init	dig_irq_init
+
+#endif /* _ASM_IA64_MACHVEC_DIG_h */
diff --git a/include/asm-ia64/machvec_hpsim.h b/include/asm-ia64/machvec_hpsim.h
new file mode 100644
index 000000000000..cf72fc87fdfe
--- /dev/null
+++ b/include/asm-ia64/machvec_hpsim.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_IA64_MACHVEC_HPSIM_h
+#define _ASM_IA64_MACHVEC_HPSIM_h
+
+extern ia64_mv_setup_t hpsim_setup;
+extern ia64_mv_irq_init_t hpsim_irq_init;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name		"hpsim"
+#define platform_setup		hpsim_setup
+#define platform_irq_init	hpsim_irq_init
+
+#endif /* _ASM_IA64_MACHVEC_HPSIM_h */
diff --git a/include/asm-ia64/machvec_hpzx1.h b/include/asm-ia64/machvec_hpzx1.h
new file mode 100644
index 000000000000..daafe504c5f4
--- /dev/null
+++ b/include/asm-ia64/machvec_hpzx1.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_MACHVEC_HPZX1_h
+#define _ASM_IA64_MACHVEC_HPZX1_h
+
+extern ia64_mv_setup_t dig_setup;
+extern ia64_mv_setup_t			sba_setup;
+extern ia64_mv_dma_alloc_coherent	sba_alloc_coherent;
+extern ia64_mv_dma_free_coherent	sba_free_coherent;
+extern ia64_mv_dma_map_single		sba_map_single;
+extern ia64_mv_dma_unmap_single		sba_unmap_single;
+extern ia64_mv_dma_map_sg		sba_map_sg;
+extern ia64_mv_dma_unmap_sg		sba_unmap_sg;
+extern ia64_mv_dma_supported		sba_dma_supported;
+extern ia64_mv_dma_mapping_error	sba_dma_mapping_error;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name			"hpzx1"
+#define platform_setup			sba_setup
+#define platform_dma_init		machvec_noop
+#define platform_dma_alloc_coherent	sba_alloc_coherent
+#define platform_dma_free_coherent	sba_free_coherent
+#define platform_dma_map_single		sba_map_single
+#define platform_dma_unmap_single	sba_unmap_single
+#define platform_dma_map_sg		sba_map_sg
+#define platform_dma_unmap_sg		sba_unmap_sg
+#define platform_dma_sync_single_for_cpu	machvec_dma_sync_single
+#define platform_dma_sync_sg_for_cpu		machvec_dma_sync_sg
+#define platform_dma_sync_single_for_device	machvec_dma_sync_single
+#define platform_dma_sync_sg_for_device		machvec_dma_sync_sg
+#define platform_dma_supported			sba_dma_supported
+#define platform_dma_mapping_error		sba_dma_mapping_error
+
+#endif /* _ASM_IA64_MACHVEC_HPZX1_h */
diff --git a/include/asm-ia64/machvec_hpzx1_swiotlb.h b/include/asm-ia64/machvec_hpzx1_swiotlb.h
new file mode 100644
index 000000000000..9924b1b00a6c
--- /dev/null
+++ b/include/asm-ia64/machvec_hpzx1_swiotlb.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
+#define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
+
+extern ia64_mv_setup_t				dig_setup;
+extern ia64_mv_dma_init				hwsw_init;
+extern ia64_mv_dma_alloc_coherent		hwsw_alloc_coherent;
+extern ia64_mv_dma_free_coherent		hwsw_free_coherent;
+extern ia64_mv_dma_map_single			hwsw_map_single;
+extern ia64_mv_dma_unmap_single			hwsw_unmap_single;
+extern ia64_mv_dma_map_sg			hwsw_map_sg;
+extern ia64_mv_dma_unmap_sg			hwsw_unmap_sg;
+extern ia64_mv_dma_supported			hwsw_dma_supported;
+extern ia64_mv_dma_mapping_error		hwsw_dma_mapping_error;
+extern ia64_mv_dma_sync_single_for_cpu		hwsw_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu		hwsw_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device	hwsw_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device		hwsw_sync_sg_for_device;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name				"hpzx1_swiotlb"
+
+#define platform_setup				dig_setup
+#define platform_dma_init			hwsw_init
+#define platform_dma_alloc_coherent		hwsw_alloc_coherent
+#define platform_dma_free_coherent		hwsw_free_coherent
+#define platform_dma_map_single			hwsw_map_single
+#define platform_dma_unmap_single		hwsw_unmap_single
+#define platform_dma_map_sg			hwsw_map_sg
+#define platform_dma_unmap_sg			hwsw_unmap_sg
+#define platform_dma_supported			hwsw_dma_supported
+#define platform_dma_mapping_error		hwsw_dma_mapping_error
+#define platform_dma_sync_single_for_cpu	hwsw_sync_single_for_cpu
+#define platform_dma_sync_sg_for_cpu		hwsw_sync_sg_for_cpu
+#define platform_dma_sync_single_for_device	hwsw_sync_single_for_device
+#define platform_dma_sync_sg_for_device		hwsw_sync_sg_for_device
+
+#endif /* _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h */
diff --git a/include/asm-ia64/machvec_init.h b/include/asm-ia64/machvec_init.h
new file mode 100644
index 000000000000..2d36f6840f0b
--- /dev/null
+++ b/include/asm-ia64/machvec_init.h
@@ -0,0 +1,32 @@
+#include <asm/machvec.h>
+
+extern ia64_mv_send_ipi_t ia64_send_ipi;
+extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge;
+extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq;
+extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem;
+extern ia64_mv_pci_legacy_read_t ia64_pci_legacy_read;
+extern ia64_mv_pci_legacy_write_t ia64_pci_legacy_write;
+
+extern ia64_mv_inb_t __ia64_inb;
+extern ia64_mv_inw_t __ia64_inw;
+extern ia64_mv_inl_t __ia64_inl;
+extern ia64_mv_outb_t __ia64_outb;
+extern ia64_mv_outw_t __ia64_outw;
+extern ia64_mv_outl_t __ia64_outl;
+extern ia64_mv_mmiowb_t __ia64_mmiowb;
+extern ia64_mv_readb_t __ia64_readb;
+extern ia64_mv_readw_t __ia64_readw;
+extern ia64_mv_readl_t __ia64_readl;
+extern ia64_mv_readq_t __ia64_readq;
+extern ia64_mv_readb_t __ia64_readb_relaxed;
+extern ia64_mv_readw_t __ia64_readw_relaxed;
+extern ia64_mv_readl_t __ia64_readl_relaxed;
+extern ia64_mv_readq_t __ia64_readq_relaxed;
+
+#define MACHVEC_HELPER(name)									\
+ struct ia64_machine_vector machvec_##name __attribute__ ((unused, __section__ (".machvec")))	\
+	= MACHVEC_INIT(name);
+
+#define MACHVEC_DEFINE(name)	MACHVEC_HELPER(name)
+
+MACHVEC_DEFINE(MACHVEC_PLATFORM_NAME)
diff --git a/include/asm-ia64/machvec_sn2.h b/include/asm-ia64/machvec_sn2.h
new file mode 100644
index 000000000000..e1b6cd63f49e
--- /dev/null
+++ b/include/asm-ia64/machvec_sn2.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (c) 2002-2003 Silicon Graphics, Inc.  All Rights Reserved.
+ * 
+ * This program is free software; you can redistribute it and/or modify it 
+ * under the terms of version 2 of the GNU General Public License 
+ * as published by the Free Software Foundation.
+ * 
+ * This program is distributed in the hope that it would be useful, but 
+ * WITHOUT ANY WARRANTY; without even the implied warranty of 
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 
+ * 
+ * Further, this software is distributed without any warranty that it is 
+ * free of the rightful claim of any third person regarding infringement 
+ * or the like.  Any license provided herein, whether implied or 
+ * otherwise, applies only to this software file.  Patent licenses, if 
+ * any, provided herein do not apply to combinations of this program with 
+ * other software, or any other product whatsoever.
+ * 
+ * You should have received a copy of the GNU General Public 
+ * License along with this program; if not, write the Free Software 
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ * 
+ * Contact information:  Silicon Graphics, Inc., 1600 Amphitheatre Pkwy, 
+ * Mountain View, CA  94043, or:
+ * 
+ * http://www.sgi.com 
+ * 
+ * For further information regarding this notice, see: 
+ * 
+ * http://oss.sgi.com/projects/GenInfo/NoticeExplan
+ */
+
+#ifndef _ASM_IA64_MACHVEC_SN2_H
+#define _ASM_IA64_MACHVEC_SN2_H
+
+extern ia64_mv_setup_t sn_setup;
+extern ia64_mv_cpu_init_t sn_cpu_init;
+extern ia64_mv_irq_init_t sn_irq_init;
+extern ia64_mv_send_ipi_t sn2_send_IPI;
+extern ia64_mv_timer_interrupt_t sn_timer_interrupt;
+extern ia64_mv_global_tlb_purge_t sn2_global_tlb_purge;
+extern ia64_mv_tlb_migrate_finish_t	sn_tlb_migrate_finish;
+extern ia64_mv_local_vector_to_irq sn_local_vector_to_irq;
+extern ia64_mv_pci_get_legacy_mem_t sn_pci_get_legacy_mem;
+extern ia64_mv_pci_legacy_read_t sn_pci_legacy_read;
+extern ia64_mv_pci_legacy_write_t sn_pci_legacy_write;
+extern ia64_mv_inb_t __sn_inb;
+extern ia64_mv_inw_t __sn_inw;
+extern ia64_mv_inl_t __sn_inl;
+extern ia64_mv_outb_t __sn_outb;
+extern ia64_mv_outw_t __sn_outw;
+extern ia64_mv_outl_t __sn_outl;
+extern ia64_mv_mmiowb_t __sn_mmiowb;
+extern ia64_mv_readb_t __sn_readb;
+extern ia64_mv_readw_t __sn_readw;
+extern ia64_mv_readl_t __sn_readl;
+extern ia64_mv_readq_t __sn_readq;
+extern ia64_mv_readb_t __sn_readb_relaxed;
+extern ia64_mv_readw_t __sn_readw_relaxed;
+extern ia64_mv_readl_t __sn_readl_relaxed;
+extern ia64_mv_readq_t __sn_readq_relaxed;
+extern ia64_mv_dma_alloc_coherent	sn_dma_alloc_coherent;
+extern ia64_mv_dma_free_coherent	sn_dma_free_coherent;
+extern ia64_mv_dma_map_single		sn_dma_map_single;
+extern ia64_mv_dma_unmap_single		sn_dma_unmap_single;
+extern ia64_mv_dma_map_sg		sn_dma_map_sg;
+extern ia64_mv_dma_unmap_sg		sn_dma_unmap_sg;
+extern ia64_mv_dma_sync_single_for_cpu	sn_dma_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu	sn_dma_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device sn_dma_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device	sn_dma_sync_sg_for_device;
+extern ia64_mv_dma_mapping_error	sn_dma_mapping_error;
+extern ia64_mv_dma_supported		sn_dma_supported;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name			"sn2"
+#define platform_setup			sn_setup
+#define platform_cpu_init		sn_cpu_init
+#define platform_irq_init		sn_irq_init
+#define platform_send_ipi		sn2_send_IPI
+#define platform_timer_interrupt	sn_timer_interrupt
+#define platform_global_tlb_purge       sn2_global_tlb_purge
+#define platform_tlb_migrate_finish	sn_tlb_migrate_finish
+#define platform_pci_fixup		sn_pci_fixup
+#define platform_inb			__sn_inb
+#define platform_inw			__sn_inw
+#define platform_inl			__sn_inl
+#define platform_outb			__sn_outb
+#define platform_outw			__sn_outw
+#define platform_outl			__sn_outl
+#define platform_mmiowb			__sn_mmiowb
+#define platform_readb			__sn_readb
+#define platform_readw			__sn_readw
+#define platform_readl			__sn_readl
+#define platform_readq			__sn_readq
+#define platform_readb_relaxed		__sn_readb_relaxed
+#define platform_readw_relaxed		__sn_readw_relaxed
+#define platform_readl_relaxed		__sn_readl_relaxed
+#define platform_readq_relaxed		__sn_readq_relaxed
+#define platform_local_vector_to_irq	sn_local_vector_to_irq
+#define platform_pci_get_legacy_mem	sn_pci_get_legacy_mem
+#define platform_pci_legacy_read	sn_pci_legacy_read
+#define platform_pci_legacy_write	sn_pci_legacy_write
+#define platform_dma_init		machvec_noop
+#define platform_dma_alloc_coherent	sn_dma_alloc_coherent
+#define platform_dma_free_coherent	sn_dma_free_coherent
+#define platform_dma_map_single		sn_dma_map_single
+#define platform_dma_unmap_single	sn_dma_unmap_single
+#define platform_dma_map_sg		sn_dma_map_sg
+#define platform_dma_unmap_sg		sn_dma_unmap_sg
+#define platform_dma_sync_single_for_cpu sn_dma_sync_single_for_cpu
+#define platform_dma_sync_sg_for_cpu	sn_dma_sync_sg_for_cpu
+#define platform_dma_sync_single_for_device sn_dma_sync_single_for_device
+#define platform_dma_sync_sg_for_device	sn_dma_sync_sg_for_device
+#define platform_dma_mapping_error		sn_dma_mapping_error
+#define platform_dma_supported		sn_dma_supported
+
+#include <asm/sn/io.h>
+
+#endif /* _ASM_IA64_MACHVEC_SN2_H */
diff --git a/include/asm-ia64/mc146818rtc.h b/include/asm-ia64/mc146818rtc.h
new file mode 100644
index 000000000000..407787a237ba
--- /dev/null
+++ b/include/asm-ia64/mc146818rtc.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_IA64_MC146818RTC_H
+#define _ASM_IA64_MC146818RTC_H
+
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+
+/* empty include file to satisfy the include in genrtc.c */
+
+#endif /* _ASM_IA64_MC146818RTC_H */
diff --git a/include/asm-ia64/mca.h b/include/asm-ia64/mca.h
new file mode 100644
index 000000000000..149ad0118455
--- /dev/null
+++ b/include/asm-ia64/mca.h
@@ -0,0 +1,132 @@
+/*
+ * File:	mca.h
+ * Purpose:	Machine check handling specific defines
+ *
+ * Copyright (C) 1999, 2004 Silicon Graphics, Inc.
+ * Copyright (C) Vijay Chander (vijay@engr.sgi.com)
+ * Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
+ * Copyright (C) Russ Anderson (rja@sgi.com)
+ */
+
+#ifndef _ASM_IA64_MCA_H
+#define _ASM_IA64_MCA_H
+
+#define IA64_MCA_STACK_SIZE	8192
+
+#if !defined(__ASSEMBLY__)
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+
+#include <asm/param.h>
+#include <asm/sal.h>
+#include <asm/processor.h>
+#include <asm/mca_asm.h>
+
+#define IA64_MCA_RENDEZ_TIMEOUT		(20 * 1000)	/* value in milliseconds - 20 seconds */
+
+typedef struct ia64_fptr {
+	unsigned long fp;
+	unsigned long gp;
+} ia64_fptr_t;
+
+typedef union cmcv_reg_u {
+	u64	cmcv_regval;
+	struct	{
+		u64	cmcr_vector		: 8;
+		u64	cmcr_reserved1		: 4;
+		u64	cmcr_ignored1		: 1;
+		u64	cmcr_reserved2		: 3;
+		u64	cmcr_mask		: 1;
+		u64	cmcr_ignored2		: 47;
+	} cmcv_reg_s;
+
+} cmcv_reg_t;
+
+#define cmcv_mask		cmcv_reg_s.cmcr_mask
+#define cmcv_vector		cmcv_reg_s.cmcr_vector
+
+enum {
+	IA64_MCA_RENDEZ_CHECKIN_NOTDONE	=	0x0,
+	IA64_MCA_RENDEZ_CHECKIN_DONE	=	0x1
+};
+
+/* Information maintained by the MC infrastructure */
+typedef struct ia64_mc_info_s {
+	u64		imi_mca_handler;
+	size_t		imi_mca_handler_size;
+	u64		imi_monarch_init_handler;
+	size_t		imi_monarch_init_handler_size;
+	u64		imi_slave_init_handler;
+	size_t		imi_slave_init_handler_size;
+	u8		imi_rendez_checkin[NR_CPUS];
+
+} ia64_mc_info_t;
+
+typedef struct ia64_mca_sal_to_os_state_s {
+	u64		imsto_os_gp;		/* GP of the os registered with the SAL */
+	u64		imsto_pal_proc;		/* PAL_PROC entry point - physical addr */
+	u64		imsto_sal_proc;		/* SAL_PROC entry point - physical addr */
+	u64		imsto_sal_gp;		/* GP of the SAL - physical */
+	u64		imsto_rendez_state;	/* Rendez state information */
+	u64		imsto_sal_check_ra;	/* Return address in SAL_CHECK while going
+						 * back to SAL from OS after MCA handling.
+						 */
+	u64		pal_min_state;		/* from PAL in r17 */
+	u64		proc_state_param;	/* from PAL in r18. See SDV 2:268 11.3.2.1 */
+} ia64_mca_sal_to_os_state_t;
+
+enum {
+	IA64_MCA_CORRECTED	=	0x0,	/* Error has been corrected by OS_MCA */
+	IA64_MCA_WARM_BOOT	=	-1,	/* Warm boot of the system need from SAL */
+	IA64_MCA_COLD_BOOT	=	-2,	/* Cold boot of the system need from SAL */
+	IA64_MCA_HALT		=	-3	/* System to be halted by SAL */
+};
+
+enum {
+	IA64_MCA_SAME_CONTEXT	=	0x0,	/* SAL to return to same context */
+	IA64_MCA_NEW_CONTEXT	=	-1	/* SAL to return to new context */
+};
+
+typedef struct ia64_mca_os_to_sal_state_s {
+	u64		imots_os_status;	/*   OS status to SAL as to what happened
+						 *   with the MCA handling.
+						 */
+	u64		imots_sal_gp;		/* GP of the SAL - physical */
+	u64		imots_context;		/* 0 if return to same context
+						   1 if return to new context */
+	u64		*imots_new_min_state;	/* Pointer to structure containing
+						 * new values of registers in the min state
+						 * save area.
+						 */
+	u64		imots_sal_check_ra;	/* Return address in SAL_CHECK while going
+						 * back to SAL from OS after MCA handling.
+						 */
+} ia64_mca_os_to_sal_state_t;
+
+/* Per-CPU MCA state that is too big for normal per-CPU variables.  */
+
+struct ia64_mca_cpu {
+	u64 stack[IA64_MCA_STACK_SIZE/8];	/* MCA memory-stack */
+	u64 proc_state_dump[512];
+	u64 stackframe[32];
+	u64 rbstore[IA64_MCA_STACK_SIZE/8];	/* MCA reg.-backing store */
+	u64 init_stack[KERNEL_STACK_SIZE/8];
+} __attribute__ ((aligned(16)));
+
+/* Array of physical addresses of each CPU's MCA area.  */
+extern unsigned long __per_cpu_mca[NR_CPUS];
+
+extern void ia64_mca_init(void);
+extern void ia64_mca_cpu_init(void *);
+extern void ia64_os_mca_dispatch(void);
+extern void ia64_os_mca_dispatch_end(void);
+extern void ia64_mca_ucmc_handler(void);
+extern void ia64_monarch_init_handler(void);
+extern void ia64_slave_init_handler(void);
+extern void ia64_mca_cmc_vector_setup(void);
+extern int  ia64_reg_MCA_extension(void*);
+extern void ia64_unreg_MCA_extension(void);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_IA64_MCA_H */
diff --git a/include/asm-ia64/mca_asm.h b/include/asm-ia64/mca_asm.h
new file mode 100644
index 000000000000..836953e0f91f
--- /dev/null
+++ b/include/asm-ia64/mca_asm.h
@@ -0,0 +1,312 @@
+/*
+ * File:	mca_asm.h
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) Vijay Chander (vijay@engr.sgi.com)
+ * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
+ * Copyright (C) 2000 Hewlett-Packard Co.
+ * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
+ */
+#ifndef _ASM_IA64_MCA_ASM_H
+#define _ASM_IA64_MCA_ASM_H
+
+#define PSR_IC		13
+#define PSR_I		14
+#define	PSR_DT		17
+#define PSR_RT		27
+#define PSR_MC		35
+#define PSR_IT		36
+#define PSR_BN		44
+
+/*
+ * This macro converts a instruction virtual address to a physical address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ *	1. Lop off bits 61 thru 63 in the virtual address
+ */
+#define INST_VA_TO_PA(addr)							\
+	dep	addr	= 0, addr, 61, 3
+/*
+ * This macro converts a data virtual address to a physical address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ *	1. Lop off bits 61 thru 63 in the virtual address
+ */
+#define DATA_VA_TO_PA(addr)							\
+	tpa	addr	= addr
+/*
+ * This macro converts a data physical address to a virtual address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ *	1. Put 0x7 in bits 61 thru 63.
+ */
+#define DATA_PA_TO_VA(addr,temp)							\
+	mov	temp	= 0x7	;;							\
+	dep	addr	= temp, addr, 61, 3
+
+#define GET_THIS_PADDR(reg, var)		\
+	mov	reg = IA64_KR(PER_CPU_DATA);;	\
+        addl	reg = THIS_CPU(var), reg
+
+/*
+ * This macro jumps to the instruction at the given virtual address
+ * and starts execution in physical mode with all the address
+ * translations turned off.
+ *	1.	Save the current psr
+ *	2.	Make sure that all the upper 32 bits are off
+ *
+ *	3.	Clear the interrupt enable and interrupt state collection bits
+ *		in the psr before updating the ipsr and iip.
+ *
+ *	4.	Turn off the instruction, data and rse translation bits of the psr
+ *		and store the new value into ipsr
+ *		Also make sure that the interrupts are disabled.
+ *		Ensure that we are in little endian mode.
+ *		[psr.{rt, it, dt, i, be} = 0]
+ *
+ *	5.	Get the physical address corresponding to the virtual address
+ *		of the next instruction bundle and put it in iip.
+ *		(Using magic numbers 24 and 40 in the deposint instruction since
+ *		 the IA64_SDK code directly maps to lower 24bits as physical address
+ *		 from a virtual address).
+ *
+ *	6.	Do an rfi to move the values from ipsr to psr and iip to ip.
+ */
+#define  PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr)				\
+	mov	old_psr = psr;								\
+	;;										\
+	dep	old_psr = 0, old_psr, 32, 32;						\
+											\
+	mov	ar.rsc = 0 ;								\
+	;;										\
+	srlz.d;										\
+	mov	temp2 = ar.bspstore;							\
+	;;										\
+	DATA_VA_TO_PA(temp2);								\
+	;;										\
+	mov	temp1 = ar.rnat;							\
+	;;										\
+	mov	ar.bspstore = temp2;							\
+	;;										\
+	mov	ar.rnat = temp1;							\
+	mov	temp1 = psr;								\
+	mov	temp2 = psr;								\
+	;;										\
+											\
+	dep	temp2 = 0, temp2, PSR_IC, 2;						\
+	;;										\
+	mov	psr.l = temp2;								\
+	;;										\
+	srlz.d;										\
+	dep	temp1 = 0, temp1, 32, 32;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_IT, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_DT, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_RT, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_I, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_IC, 1;						\
+	;;										\
+	dep	temp1 = -1, temp1, PSR_MC, 1;						\
+	;;										\
+	mov	cr.ipsr = temp1;							\
+	;;										\
+	LOAD_PHYSICAL(p0, temp2, start_addr);						\
+	;;										\
+	mov	cr.iip = temp2;								\
+	mov	cr.ifs = r0;								\
+	DATA_VA_TO_PA(sp);								\
+	DATA_VA_TO_PA(gp);								\
+	;;										\
+	srlz.i;										\
+	;;										\
+	nop	1;									\
+	nop	2;									\
+	nop	1;									\
+	nop	2;									\
+	rfi;										\
+	;;
+
+/*
+ * This macro jumps to the instruction at the given virtual address
+ * and starts execution in virtual mode with all the address
+ * translations turned on.
+ *	1.	Get the old saved psr
+ *
+ *	2.	Clear the interrupt state collection bit in the current psr.
+ *
+ *	3.	Set the instruction translation bit back in the old psr
+ *		Note we have to do this since we are right now saving only the
+ *		lower 32-bits of old psr.(Also the old psr has the data and
+ *		rse translation bits on)
+ *
+ *	4.	Set ipsr to this old_psr with "it" bit set and "bn" = 1.
+ *
+ *	5.	Reset the current thread pointer (r13).
+ *
+ *	6.	Set iip to the virtual address of the next instruction bundle.
+ *
+ *	7.	Do an rfi to move ipsr to psr and iip to ip.
+ */
+
+#define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr)	\
+	mov	temp2 = psr;					\
+	;;							\
+	mov	old_psr = temp2;				\
+	;;							\
+	dep	temp2 = 0, temp2, PSR_IC, 2;			\
+	;;							\
+	mov	psr.l = temp2;					\
+	mov	ar.rsc = 0;					\
+	;;							\
+	srlz.d;							\
+	mov	r13 = ar.k6;					\
+	mov	temp2 = ar.bspstore;				\
+	;;							\
+	DATA_PA_TO_VA(temp2,temp1);				\
+	;;							\
+	mov	temp1 = ar.rnat;				\
+	;;							\
+	mov	ar.bspstore = temp2;				\
+	;;							\
+	mov	ar.rnat = temp1;				\
+	;;							\
+	mov	temp1 = old_psr;				\
+	;;							\
+	mov	temp2 = 1;					\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_IC, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_IT, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_DT, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_RT, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_BN, 1;		\
+	;;							\
+								\
+	mov     cr.ipsr = temp1;				\
+	movl	temp2 = start_addr;				\
+	;;							\
+	mov	cr.iip = temp2;					\
+	;;							\
+	DATA_PA_TO_VA(sp, temp1);				\
+	DATA_PA_TO_VA(gp, temp2);				\
+	srlz.i;							\
+	;;							\
+	nop	1;						\
+	nop	2;						\
+	nop	1;						\
+	rfi							\
+	;;
+
+/*
+ * The following offsets capture the order in which the
+ * RSE related registers from the old context are
+ * saved onto the new stack frame.
+ *
+ *	+-----------------------+
+ *	|NDIRTY [BSP - BSPSTORE]|
+ *	+-----------------------+
+ *	|	RNAT		|
+ *	+-----------------------+
+ *	|	BSPSTORE	|
+ *	+-----------------------+
+ *	|	IFS		|
+ *	+-----------------------+
+ *	|	PFS		|
+ *	+-----------------------+
+ *	|	RSC		|
+ *	+-----------------------+ <-------- Bottom of new stack frame
+ */
+#define  rse_rsc_offset		0
+#define  rse_pfs_offset		(rse_rsc_offset+0x08)
+#define  rse_ifs_offset		(rse_pfs_offset+0x08)
+#define  rse_bspstore_offset	(rse_ifs_offset+0x08)
+#define  rse_rnat_offset	(rse_bspstore_offset+0x08)
+#define  rse_ndirty_offset	(rse_rnat_offset+0x08)
+
+/*
+ * rse_switch_context
+ *
+ *	1. Save old RSC onto the new stack frame
+ *	2. Save PFS onto new stack frame
+ *	3. Cover the old frame and start a new frame.
+ *	4. Save IFS onto new stack frame
+ *	5. Save the old BSPSTORE on the new stack frame
+ *	6. Save the old RNAT on the new stack frame
+ *	7. Write BSPSTORE with the new backing store pointer
+ *	8. Read and save the new BSP to calculate the #dirty registers
+ * NOTE: Look at pages 11-10, 11-11 in PRM Vol 2
+ */
+#define rse_switch_context(temp,p_stackframe,p_bspstore)			\
+	;;									\
+	mov     temp=ar.rsc;;							\
+	st8     [p_stackframe]=temp,8;;					\
+	mov     temp=ar.pfs;;							\
+	st8     [p_stackframe]=temp,8;						\
+	cover ;;								\
+	mov     temp=cr.ifs;;							\
+	st8     [p_stackframe]=temp,8;;						\
+	mov     temp=ar.bspstore;;						\
+	st8     [p_stackframe]=temp,8;;					\
+	mov     temp=ar.rnat;;							\
+	st8     [p_stackframe]=temp,8;						\
+	mov     ar.bspstore=p_bspstore;;					\
+	mov     temp=ar.bsp;;							\
+	sub     temp=temp,p_bspstore;;						\
+	st8     [p_stackframe]=temp,8;;
+
+/*
+ * rse_return_context
+ *	1. Allocate a zero-sized frame
+ *	2. Store the number of dirty registers RSC.loadrs field
+ *	3. Issue a loadrs to insure that any registers from the interrupted
+ *	   context which were saved on the new stack frame have been loaded
+ *	   back into the stacked registers
+ *	4. Restore BSPSTORE
+ *	5. Restore RNAT
+ *	6. Restore PFS
+ *	7. Restore IFS
+ *	8. Restore RSC
+ *	9. Issue an RFI
+ */
+#define rse_return_context(psr_mask_reg,temp,p_stackframe)			\
+	;;									\
+	alloc   temp=ar.pfs,0,0,0,0;						\
+	add     p_stackframe=rse_ndirty_offset,p_stackframe;;			\
+	ld8     temp=[p_stackframe];;						\
+	shl     temp=temp,16;;							\
+	mov     ar.rsc=temp;;							\
+	loadrs;;								\
+	add     p_stackframe=-rse_ndirty_offset+rse_bspstore_offset,p_stackframe;;\
+	ld8     temp=[p_stackframe];;						\
+	mov     ar.bspstore=temp;;						\
+	add     p_stackframe=-rse_bspstore_offset+rse_rnat_offset,p_stackframe;;\
+	ld8     temp=[p_stackframe];;						\
+	mov     ar.rnat=temp;;							\
+	add     p_stackframe=-rse_rnat_offset+rse_pfs_offset,p_stackframe;;	\
+	ld8     temp=[p_stackframe];;						\
+	mov     ar.pfs=temp;;							\
+	add     p_stackframe=-rse_pfs_offset+rse_ifs_offset,p_stackframe;;	\
+	ld8     temp=[p_stackframe];;						\
+	mov     cr.ifs=temp;;							\
+	add     p_stackframe=-rse_ifs_offset+rse_rsc_offset,p_stackframe;;	\
+	ld8     temp=[p_stackframe];;						\
+	mov     ar.rsc=temp ;							\
+	mov     temp=psr;;							\
+	or      temp=temp,psr_mask_reg;;					\
+	mov     cr.ipsr=temp;;							\
+	mov     temp=ip;;							\
+	add     temp=0x30,temp;;						\
+	mov     cr.iip=temp;;							\
+	srlz.i;;								\
+	rfi;;
+
+#endif /* _ASM_IA64_MCA_ASM_H */
diff --git a/include/asm-ia64/meminit.h b/include/asm-ia64/meminit.h
new file mode 100644
index 000000000000..1590dc65b30b
--- /dev/null
+++ b/include/asm-ia64/meminit.h
@@ -0,0 +1,60 @@
+#ifndef meminit_h
+#define meminit_h
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/config.h>
+
+/*
+ * Entries defined so far:
+ * 	- boot param structure itself
+ * 	- memory map
+ * 	- initrd (optional)
+ * 	- command line string
+ * 	- kernel code & data
+ *
+ * More could be added if necessary
+ */
+#define IA64_MAX_RSVD_REGIONS 5
+
+struct rsvd_region {
+	unsigned long start;	/* virtual address of beginning of element */
+	unsigned long end;	/* virtual address of end of element + 1 */
+};
+
+extern struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1];
+extern int num_rsvd_regions;
+
+extern void find_memory (void);
+extern void reserve_memory (void);
+extern void find_initrd (void);
+extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg);
+
+/*
+ * For rounding an address to the next IA64_GRANULE_SIZE or order
+ */
+#define GRANULEROUNDDOWN(n)	((n) & ~(IA64_GRANULE_SIZE-1))
+#define GRANULEROUNDUP(n)	(((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
+#define ORDERROUNDDOWN(n)	((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
+
+#ifdef CONFIG_DISCONTIGMEM
+  extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);
+#else
+# define call_pernode_memory(start, len, func)	(*func)(start, len, 0)
+#endif
+
+#define IGNORE_PFN0	1	/* XXX fix me: ignore pfn 0 until TLB miss handler is updated... */
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+# define LARGE_GAP	0x40000000 /* Use virtual mem map if hole is > than this */
+  extern unsigned long vmalloc_end;
+  extern struct page *vmem_map;
+  extern int find_largest_hole (u64 start, u64 end, void *arg);
+  extern int create_mem_map_page_table (u64 start, u64 end, void *arg);
+#endif
+
+#endif /* meminit_h */
diff --git a/include/asm-ia64/mman.h b/include/asm-ia64/mman.h
new file mode 100644
index 000000000000..1c0a73af1461
--- /dev/null
+++ b/include/asm-ia64/mman.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_MMAN_H
+#define _ASM_IA64_MMAN_H
+
+/*
+ * Based on <asm-i386/mman.h>.
+ *
+ * Modified 1998-2000, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x00100		/* stack-like segment */
+#define MAP_GROWSUP	0x00200		/* register stack-like segment */
+#define MAP_DENYWRITE	0x00800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x01000		/* mark it as an executable */
+#define MAP_LOCKED	0x02000		/* pages are locked */
+#define MAP_NORESERVE	0x04000		/* don't check for reservations */
+#define MAP_POPULATE	0x08000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* _ASM_IA64_MMAN_H */
diff --git a/include/asm-ia64/mmu.h b/include/asm-ia64/mmu.h
new file mode 100644
index 000000000000..ae1525352a25
--- /dev/null
+++ b/include/asm-ia64/mmu.h
@@ -0,0 +1,11 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/*
+ * Type for a context number.  We declare it volatile to ensure proper ordering when it's
+ * accessed outside of spinlock'd critical sections (e.g., as done in activate_mm() and
+ * init_new_context()).
+ */
+typedef volatile unsigned long mm_context_t;
+
+#endif
diff --git a/include/asm-ia64/mmu_context.h b/include/asm-ia64/mmu_context.h
new file mode 100644
index 000000000000..0096e7e05012
--- /dev/null
+++ b/include/asm-ia64/mmu_context.h
@@ -0,0 +1,170 @@
+#ifndef _ASM_IA64_MMU_CONTEXT_H
+#define _ASM_IA64_MMU_CONTEXT_H
+
+/*
+ * Copyright (C) 1998-2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * Routines to manage the allocation of task context numbers.  Task context numbers are
+ * used to reduce or eliminate the need to perform TLB flushes due to context switches.
+ * Context numbers are implemented using ia-64 region ids.  Since the IA-64 TLB does not
+ * consider the region number when performing a TLB lookup, we need to assign a unique
+ * region id to each region in a process.  We use the least significant three bits in a
+ * region id for this purpose.
+ */
+
+#define IA64_REGION_ID_KERNEL	0 /* the kernel's region id (tlb.c depends on this being 0) */
+
+#define ia64_rid(ctx,addr)	(((ctx) << 3) | (addr >> 61))
+
+# ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <linux/percpu.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+
+#include <asm/processor.h>
+
+struct ia64_ctx {
+	spinlock_t lock;
+	unsigned int next;	/* next context number to use */
+	unsigned int limit;	/* next >= limit => must call wrap_mmu_context() */
+	unsigned int max_ctx;	/* max. context value supported by all CPUs */
+};
+
+extern struct ia64_ctx ia64_ctx;
+DECLARE_PER_CPU(u8, ia64_need_tlb_flush);
+
+extern void wrap_mmu_context (struct mm_struct *mm);
+
+static inline void
+enter_lazy_tlb (struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * When the context counter wraps around all TLBs need to be flushed because an old
+ * context number might have been reused. This is signalled by the ia64_need_tlb_flush
+ * per-CPU variable, which is checked in the routine below. Called by activate_mm().
+ * <efocht@ess.nec.de>
+ */
+static inline void
+delayed_tlb_flush (void)
+{
+	extern void local_flush_tlb_all (void);
+
+	if (unlikely(__ia64_per_cpu_var(ia64_need_tlb_flush))) {
+		local_flush_tlb_all();
+		__ia64_per_cpu_var(ia64_need_tlb_flush) = 0;
+	}
+}
+
+static inline mm_context_t
+get_mmu_context (struct mm_struct *mm)
+{
+	unsigned long flags;
+	mm_context_t context = mm->context;
+
+	if (context)
+		return context;
+
+	spin_lock_irqsave(&ia64_ctx.lock, flags);
+	{
+		/* re-check, now that we've got the lock: */
+		context = mm->context;
+		if (context == 0) {
+			cpus_clear(mm->cpu_vm_mask);
+			if (ia64_ctx.next >= ia64_ctx.limit)
+				wrap_mmu_context(mm);
+			mm->context = context = ia64_ctx.next++;
+		}
+	}
+	spin_unlock_irqrestore(&ia64_ctx.lock, flags);
+	return context;
+}
+
+/*
+ * Initialize context number to some sane value.  MM is guaranteed to be a brand-new
+ * address-space, so no TLB flushing is needed, ever.
+ */
+static inline int
+init_new_context (struct task_struct *p, struct mm_struct *mm)
+{
+	mm->context = 0;
+	return 0;
+}
+
+static inline void
+destroy_context (struct mm_struct *mm)
+{
+	/* Nothing to do.  */
+}
+
+static inline void
+reload_context (mm_context_t context)
+{
+	unsigned long rid;
+	unsigned long rid_incr = 0;
+	unsigned long rr0, rr1, rr2, rr3, rr4, old_rr4;
+
+	old_rr4 = ia64_get_rr(0x8000000000000000UL);
+	rid = context << 3;	/* make space for encoding the region number */
+	rid_incr = 1 << 8;
+
+	/* encode the region id, preferred page size, and VHPT enable bit: */
+	rr0 = (rid << 8) | (PAGE_SHIFT << 2) | 1;
+	rr1 = rr0 + 1*rid_incr;
+	rr2 = rr0 + 2*rid_incr;
+	rr3 = rr0 + 3*rid_incr;
+	rr4 = rr0 + 4*rid_incr;
+#ifdef  CONFIG_HUGETLB_PAGE
+	rr4 = (rr4 & (~(0xfcUL))) | (old_rr4 & 0xfc);
+#endif
+
+	ia64_set_rr(0x0000000000000000UL, rr0);
+	ia64_set_rr(0x2000000000000000UL, rr1);
+	ia64_set_rr(0x4000000000000000UL, rr2);
+	ia64_set_rr(0x6000000000000000UL, rr3);
+	ia64_set_rr(0x8000000000000000UL, rr4);
+	ia64_srlz_i();			/* srlz.i implies srlz.d */
+}
+
+static inline void
+activate_context (struct mm_struct *mm)
+{
+	mm_context_t context;
+
+	do {
+		context = get_mmu_context(mm);
+		if (!cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+			cpu_set(smp_processor_id(), mm->cpu_vm_mask);
+		reload_context(context);
+		/* in the unlikely event of a TLB-flush by another thread, redo the load: */
+	} while (unlikely(context != mm->context));
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * Switch from address space PREV to address space NEXT.
+ */
+static inline void
+activate_mm (struct mm_struct *prev, struct mm_struct *next)
+{
+	delayed_tlb_flush();
+
+	/*
+	 * We may get interrupts here, but that's OK because interrupt handlers cannot
+	 * touch user-space.
+	 */
+	ia64_set_kr(IA64_KR_PT_BASE, __pa(next->pgd));
+	activate_context(next);
+}
+
+#define switch_mm(prev_mm,next_mm,next_task)	activate_mm(prev_mm, next_mm)
+
+# endif /* ! __ASSEMBLY__ */
+#endif /* _ASM_IA64_MMU_CONTEXT_H */
diff --git a/include/asm-ia64/mmzone.h b/include/asm-ia64/mmzone.h
new file mode 100644
index 000000000000..9491dacc89cf
--- /dev/null
+++ b/include/asm-ia64/mmzone.h
@@ -0,0 +1,32 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000,2003 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2002 NEC Corp.
+ * Copyright (c) 2002 Erich Focht <efocht@ess.nec.de>
+ * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
+ */
+#ifndef _ASM_IA64_MMZONE_H
+#define _ASM_IA64_MMZONE_H
+
+#include <linux/numa.h>
+#include <asm/page.h>
+#include <asm/meminit.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#ifdef CONFIG_IA64_DIG /* DIG systems are small */
+# define MAX_PHYSNODE_ID	8
+# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 8)
+#else /* sn2 is the biggest case, so we use that if !DIG */
+# define MAX_PHYSNODE_ID	2048
+# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 4)
+#endif
+
+#else /* CONFIG_DISCONTIGMEM */
+# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 4)
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* _ASM_IA64_MMZONE_H */
diff --git a/include/asm-ia64/module.h b/include/asm-ia64/module.h
new file mode 100644
index 000000000000..85c82bd819f2
--- /dev/null
+++ b/include/asm-ia64/module.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_IA64_MODULE_H
+#define _ASM_IA64_MODULE_H
+
+/*
+ * IA-64-specific support for kernel module loader.
+ *
+ * Copyright (C) 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+struct elf64_shdr;			/* forward declration */
+
+struct mod_arch_specific {
+	struct elf64_shdr *core_plt;	/* core PLT section */
+	struct elf64_shdr *init_plt;	/* init PLT section */
+	struct elf64_shdr *got;		/* global offset table */
+	struct elf64_shdr *opd;		/* official procedure descriptors */
+	struct elf64_shdr *unwind;	/* unwind-table section */
+	unsigned long gp;		/* global-pointer for module */
+
+	void *core_unw_table;		/* core unwind-table cookie returned by unwinder */
+	void *init_unw_table;		/* init unwind-table cookie returned by unwinder */
+	unsigned int next_got_entry;	/* index of next available got entry */
+};
+
+#define Elf_Shdr	Elf64_Shdr
+#define Elf_Sym		Elf64_Sym
+#define Elf_Ehdr	Elf64_Ehdr
+
+#define MODULE_PROC_FAMILY	"ia64"
+#define MODULE_ARCH_VERMAGIC	MODULE_PROC_FAMILY
+
+#define ARCH_SHF_SMALL	SHF_IA_64_SHORT
+
+#endif /* _ASM_IA64_MODULE_H */
diff --git a/include/asm-ia64/msgbuf.h b/include/asm-ia64/msgbuf.h
new file mode 100644
index 000000000000..6c64c0d2aae1
--- /dev/null
+++ b/include/asm-ia64/msgbuf.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_IA64_MSGBUF_H
+#define _ASM_IA64_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused1;
+	unsigned long  __unused2;
+};
+
+#endif /* _ASM_IA64_MSGBUF_H */
diff --git a/include/asm-ia64/msi.h b/include/asm-ia64/msi.h
new file mode 100644
index 000000000000..60f2137f9278
--- /dev/null
+++ b/include/asm-ia64/msi.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2003-2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#ifndef ASM_MSI_H
+#define ASM_MSI_H
+
+#define NR_VECTORS		NR_IRQS
+#define FIRST_DEVICE_VECTOR 	IA64_FIRST_DEVICE_VECTOR
+#define LAST_DEVICE_VECTOR	IA64_LAST_DEVICE_VECTOR
+static inline void set_intr_gate (int nr, void *func) {}
+#define IO_APIC_VECTOR(irq)	(irq)
+#define ack_APIC_irq		ia64_eoi
+#define cpu_mask_to_apicid(mask) cpu_physical_id(first_cpu(mask))
+#define MSI_DEST_MODE		MSI_PHYSICAL_MODE
+#define MSI_TARGET_CPU	((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
+#define MSI_TARGET_CPU_SHIFT	4
+
+#endif /* ASM_MSI_H */
diff --git a/include/asm-ia64/namei.h b/include/asm-ia64/namei.h
new file mode 100644
index 000000000000..78e768079083
--- /dev/null
+++ b/include/asm-ia64/namei.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_IA64_NAMEI_H
+#define _ASM_IA64_NAMEI_H
+
+/*
+ * Modified 1998, 1999, 2001
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+
+#define EMUL_PREFIX_LINUX_IA32 "/emul/ia32-linux/"
+
+static inline char *
+__emul_prefix (void)
+{
+	switch (current->personality) {
+	      case PER_LINUX32:
+		return EMUL_PREFIX_LINUX_IA32;
+	      default:
+		return NULL;
+	}
+}
+
+#endif /* _ASM_IA64_NAMEI_H */
diff --git a/include/asm-ia64/nodedata.h b/include/asm-ia64/nodedata.h
new file mode 100644
index 000000000000..6b0f3ed89b7e
--- /dev/null
+++ b/include/asm-ia64/nodedata.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2002 NEC Corp.
+ * Copyright (c) 2002 Erich Focht <efocht@ess.nec.de>
+ * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
+ */
+#ifndef _ASM_IA64_NODEDATA_H
+#define _ASM_IA64_NODEDATA_H
+
+#include <linux/config.h>
+#include <linux/numa.h>
+
+#include <asm/percpu.h>
+#include <asm/mmzone.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * Node Data. One of these structures is located on each node of a NUMA system.
+ */
+
+struct pglist_data;
+struct ia64_node_data {
+	short			active_cpu_count;
+	short			node;
+	struct pglist_data	*pg_data_ptrs[MAX_NUMNODES];
+};
+
+
+/*
+ * Return a pointer to the node_data structure for the executing cpu.
+ */
+#define local_node_data		(local_cpu_data->node_data)
+
+/*
+ * Given a node id, return a pointer to the pg_data_t for the node.
+ *
+ * NODE_DATA 	- should be used in all code not related to system
+ *		  initialization. It uses pernode data structures to minimize
+ *		  offnode memory references. However, these structure are not 
+ *		  present during boot. This macro can be used once cpu_init
+ *		  completes.
+ */
+#define NODE_DATA(nid)		(local_node_data->pg_data_ptrs[nid])
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* _ASM_IA64_NODEDATA_H */
diff --git a/include/asm-ia64/numa.h b/include/asm-ia64/numa.h
new file mode 100644
index 000000000000..3ae128fe0823
--- /dev/null
+++ b/include/asm-ia64/numa.h
@@ -0,0 +1,74 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file contains NUMA specific prototypes and definitions.
+ *
+ * 2002/08/05 Erich Focht <efocht@ess.nec.de>
+ *
+ */
+#ifndef _ASM_IA64_NUMA_H
+#define _ASM_IA64_NUMA_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_NUMA
+
+#include <linux/cache.h>
+#include <linux/cpumask.h>
+#include <linux/numa.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+
+#include <asm/mmzone.h>
+
+extern u8 cpu_to_node_map[NR_CPUS] __cacheline_aligned;
+extern cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned;
+
+/* Stuff below this line could be architecture independent */
+
+extern int num_node_memblks;		/* total number of memory chunks */
+
+/*
+ * List of node memory chunks. Filled when parsing SRAT table to
+ * obtain information about memory nodes.
+*/
+
+struct node_memblk_s {
+	unsigned long start_paddr;
+	unsigned long size;
+	int nid;		/* which logical node contains this chunk? */
+	int bank;		/* which mem bank on this node */
+};
+
+struct node_cpuid_s {
+	u16	phys_id;	/* id << 8 | eid */
+	int	nid;		/* logical node containing this CPU */
+};
+
+extern struct node_memblk_s node_memblk[NR_NODE_MEMBLKS];
+extern struct node_cpuid_s node_cpuid[NR_CPUS];
+
+/*
+ * ACPI 2.0 SLIT (System Locality Information Table)
+ * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
+ *
+ * This is a matrix with "distances" between nodes, they should be
+ * proportional to the memory access latency ratios.
+ */
+
+extern u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];
+#define node_distance(from,to) (numa_slit[(from) * num_online_nodes() + (to)])
+
+extern int paddr_to_nid(unsigned long paddr);
+
+#define local_nodeid (cpu_to_node_map[smp_processor_id()])
+
+#else /* !CONFIG_NUMA */
+
+#define paddr_to_nid(addr)	0
+
+#endif /* CONFIG_NUMA */
+
+#endif /* _ASM_IA64_NUMA_H */
diff --git a/include/asm-ia64/numnodes.h b/include/asm-ia64/numnodes.h
new file mode 100644
index 000000000000..21cff4da5485
--- /dev/null
+++ b/include/asm-ia64/numnodes.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_MAX_NUMNODES_H
+#define _ASM_MAX_NUMNODES_H
+
+#ifdef CONFIG_IA64_DIG
+/* Max 8 Nodes */
+#define NODES_SHIFT	3
+#elif defined(CONFIG_IA64_HP_ZX1) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB)
+/* Max 32 Nodes */
+#define NODES_SHIFT	5
+#elif defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_GENERIC)
+/* Max 256 Nodes */
+#define NODES_SHIFT	8
+#endif
+
+#endif /* _ASM_MAX_NUMNODES_H */
diff --git a/include/asm-ia64/page.h b/include/asm-ia64/page.h
new file mode 100644
index 000000000000..24aab801a8ca
--- /dev/null
+++ b/include/asm-ia64/page.h
@@ -0,0 +1,207 @@
+#ifndef _ASM_IA64_PAGE_H
+#define _ASM_IA64_PAGE_H
+/*
+ * Pagetable related stuff.
+ *
+ * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <asm/intrinsics.h>
+#include <asm/types.h>
+
+/*
+ * PAGE_SHIFT determines the actual kernel page size.
+ */
+#if defined(CONFIG_IA64_PAGE_SIZE_4KB)
+# define PAGE_SHIFT	12
+#elif defined(CONFIG_IA64_PAGE_SIZE_8KB)
+# define PAGE_SHIFT	13
+#elif defined(CONFIG_IA64_PAGE_SIZE_16KB)
+# define PAGE_SHIFT	14
+#elif defined(CONFIG_IA64_PAGE_SIZE_64KB)
+# define PAGE_SHIFT	16
+#else
+# error Unsupported page size!
+#endif
+
+#define PAGE_SIZE		(__IA64_UL_CONST(1) << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE - 1))
+#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
+
+#define PERCPU_PAGE_SHIFT	16	/* log2() of max. size of per-CPU area */
+#define PERCPU_PAGE_SIZE	(__IA64_UL_CONST(1) << PERCPU_PAGE_SHIFT)
+
+#define RGN_MAP_LIMIT	((1UL << (4*PAGE_SHIFT - 12)) - PAGE_SIZE)	/* per region addr limit */
+
+#ifdef CONFIG_HUGETLB_PAGE
+# define REGION_HPAGE		(4UL)	/* note: this is hardcoded in reload_context()!*/
+# define REGION_SHIFT		61
+# define HPAGE_REGION_BASE	(REGION_HPAGE << REGION_SHIFT)
+# define HPAGE_SHIFT		hpage_shift
+# define HPAGE_SHIFT_DEFAULT	28	/* check ia64 SDM for architecture supported size */
+# define HPAGE_SIZE		(__IA64_UL_CONST(1) << HPAGE_SHIFT)
+# define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+
+# define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+# define ARCH_HAS_HUGEPAGE_ONLY_RANGE
+#endif /* CONFIG_HUGETLB_PAGE */
+
+#ifdef __ASSEMBLY__
+# define __pa(x)		((x) - PAGE_OFFSET)
+# define __va(x)		((x) + PAGE_OFFSET)
+#else /* !__ASSEMBLY */
+# ifdef __KERNEL__
+#  define STRICT_MM_TYPECHECKS
+
+extern void clear_page (void *page);
+extern void copy_page (void *to, void *from);
+
+/*
+ * clear_user_page() and copy_user_page() can't be inline functions because
+ * flush_dcache_page() can't be defined until later...
+ */
+#define clear_user_page(addr, vaddr, page)	\
+do {						\
+	clear_page(addr);			\
+	flush_dcache_page(page);		\
+} while (0)
+
+#define copy_user_page(to, from, vaddr, page)	\
+do {						\
+	copy_page((to), (from));		\
+	flush_dcache_page(page);		\
+} while (0)
+
+
+#define alloc_zeroed_user_highpage(vma, vaddr) \
+({						\
+	struct page *page = alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO, vma, vaddr); \
+	if (page)				\
+ 		flush_dcache_page(page);	\
+	page;					\
+})
+
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+extern int ia64_pfn_valid (unsigned long pfn);
+#else
+# define ia64_pfn_valid(pfn) 1
+#endif
+
+#ifndef CONFIG_DISCONTIGMEM
+# define pfn_valid(pfn)		(((pfn) < max_mapnr) && ia64_pfn_valid(pfn))
+# define page_to_pfn(page)	((unsigned long) (page - mem_map))
+# define pfn_to_page(pfn)	(mem_map + (pfn))
+#else
+extern struct page *vmem_map;
+extern unsigned long max_low_pfn;
+# define pfn_valid(pfn)		(((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
+# define page_to_pfn(page)	((unsigned long) (page - vmem_map))
+# define pfn_to_page(pfn)	(vmem_map + (pfn))
+#endif
+
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+
+typedef union ia64_va {
+	struct {
+		unsigned long off : 61;		/* intra-region offset */
+		unsigned long reg :  3;		/* region number */
+	} f;
+	unsigned long l;
+	void *p;
+} ia64_va;
+
+/*
+ * Note: These macros depend on the fact that PAGE_OFFSET has all
+ * region bits set to 1 and all other bits set to zero.  They are
+ * expressed in this way to ensure they result in a single "dep"
+ * instruction.
+ */
+#define __pa(x)		({ia64_va _v; _v.l = (long) (x); _v.f.reg = 0; _v.l;})
+#define __va(x)		({ia64_va _v; _v.l = (long) (x); _v.f.reg = -1; _v.p;})
+
+#define REGION_NUMBER(x)	({ia64_va _v; _v.l = (long) (x); _v.f.reg;})
+#define REGION_OFFSET(x)	({ia64_va _v; _v.l = (long) (x); _v.f.off;})
+
+#define REGION_SIZE		REGION_NUMBER(1)
+#define REGION_KERNEL		7
+
+#ifdef CONFIG_HUGETLB_PAGE
+# define htlbpage_to_page(x)	(((unsigned long) REGION_NUMBER(x) << 61)			\
+				 | (REGION_OFFSET(x) >> (HPAGE_SHIFT-PAGE_SHIFT)))
+# define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+# define is_hugepage_only_range(mm, addr, len)		\
+	 (REGION_NUMBER(addr) == REGION_HPAGE &&	\
+	  REGION_NUMBER((addr)+(len)) == REGION_HPAGE)
+extern unsigned int hpage_shift;
+#endif
+
+static __inline__ int
+get_order (unsigned long size)
+{
+	long double d = size - 1;
+	long order;
+
+	order = ia64_getf_exp(d);
+	order = order - PAGE_SHIFT - 0xffff + 1;
+	if (order < 0)
+		order = 0;
+	return order;
+}
+
+# endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY__ */
+
+#ifdef STRICT_MM_TYPECHECKS
+  /*
+   * These are used to make use of C type-checking..
+   */
+  typedef struct { unsigned long pte; } pte_t;
+  typedef struct { unsigned long pmd; } pmd_t;
+  typedef struct { unsigned long pgd; } pgd_t;
+  typedef struct { unsigned long pgprot; } pgprot_t;
+
+# define pte_val(x)	((x).pte)
+# define pmd_val(x)	((x).pmd)
+# define pgd_val(x)	((x).pgd)
+# define pgprot_val(x)	((x).pgprot)
+
+# define __pte(x)	((pte_t) { (x) } )
+# define __pgprot(x)	((pgprot_t) { (x) } )
+
+#else /* !STRICT_MM_TYPECHECKS */
+  /*
+   * .. while these make it easier on the compiler
+   */
+# ifndef __ASSEMBLY__
+    typedef unsigned long pte_t;
+    typedef unsigned long pmd_t;
+    typedef unsigned long pgd_t;
+    typedef unsigned long pgprot_t;
+# endif
+
+# define pte_val(x)	(x)
+# define pmd_val(x)	(x)
+# define pgd_val(x)	(x)
+# define pgprot_val(x)	(x)
+
+# define __pte(x)	(x)
+# define __pgd(x)	(x)
+# define __pgprot(x)	(x)
+#endif /* !STRICT_MM_TYPECHECKS */
+
+#define PAGE_OFFSET			__IA64_UL_CONST(0xe000000000000000)
+
+#define VM_DATA_DEFAULT_FLAGS		(VM_READ | VM_WRITE |					\
+					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC |		\
+					 (((current->personality & READ_IMPLIES_EXEC) != 0)	\
+					  ? VM_EXEC : 0))
+
+#endif /* _ASM_IA64_PAGE_H */
diff --git a/include/asm-ia64/pal.h b/include/asm-ia64/pal.h
new file mode 100644
index 000000000000..5dd477ffb88e
--- /dev/null
+++ b/include/asm-ia64/pal.h
@@ -0,0 +1,1564 @@
+#ifndef _ASM_IA64_PAL_H
+#define _ASM_IA64_PAL_H
+
+/*
+ * Processor Abstraction Layer definitions.
+ *
+ * This is based on Intel IA-64 Architecture Software Developer's Manual rev 1.0
+ * chapter 11 IA-64 Processor Abstraction Layer
+ *
+ * Copyright (C) 1998-2001 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
+ *
+ * 99/10/01	davidm	Make sure we pass zero for reserved parameters.
+ * 00/03/07	davidm	Updated pal_cache_flush() to be in sync with PAL v2.6.
+ * 00/03/23     cfleck  Modified processor min-state save area to match updated PAL & SAL info
+ * 00/05/24     eranian Updated to latest PAL spec, fix structures bugs, added
+ * 00/05/25	eranian Support for stack calls, and static physical calls
+ * 00/06/18	eranian Support for stacked physical calls
+ */
+
+/*
+ * Note that some of these calls use a static-register only calling
+ * convention which has nothing to do with the regular calling
+ * convention.
+ */
+#define PAL_CACHE_FLUSH		1	/* flush i/d cache */
+#define PAL_CACHE_INFO		2	/* get detailed i/d cache info */
+#define PAL_CACHE_INIT		3	/* initialize i/d cache */
+#define PAL_CACHE_SUMMARY	4	/* get summary of cache heirarchy */
+#define PAL_MEM_ATTRIB		5	/* list supported memory attributes */
+#define PAL_PTCE_INFO		6	/* purge TLB info */
+#define PAL_VM_INFO		7	/* return supported virtual memory features */
+#define PAL_VM_SUMMARY		8	/* return summary on supported vm features */
+#define PAL_BUS_GET_FEATURES	9	/* return processor bus interface features settings */
+#define PAL_BUS_SET_FEATURES	10	/* set processor bus features */
+#define PAL_DEBUG_INFO		11	/* get number of debug registers */
+#define PAL_FIXED_ADDR		12	/* get fixed component of processors's directed address */
+#define PAL_FREQ_BASE		13	/* base frequency of the platform */
+#define PAL_FREQ_RATIOS		14	/* ratio of processor, bus and ITC frequency */
+#define PAL_PERF_MON_INFO	15	/* return performance monitor info */
+#define PAL_PLATFORM_ADDR	16	/* set processor interrupt block and IO port space addr */
+#define PAL_PROC_GET_FEATURES	17	/* get configurable processor features & settings */
+#define PAL_PROC_SET_FEATURES	18	/* enable/disable configurable processor features */
+#define PAL_RSE_INFO		19	/* return rse information */
+#define PAL_VERSION		20	/* return version of PAL code */
+#define PAL_MC_CLEAR_LOG	21	/* clear all processor log info */
+#define PAL_MC_DRAIN		22	/* drain operations which could result in an MCA */
+#define PAL_MC_EXPECTED		23	/* set/reset expected MCA indicator */
+#define PAL_MC_DYNAMIC_STATE	24	/* get processor dynamic state */
+#define PAL_MC_ERROR_INFO	25	/* get processor MCA info and static state */
+#define PAL_MC_RESUME		26	/* Return to interrupted process */
+#define PAL_MC_REGISTER_MEM	27	/* Register memory for PAL to use during MCAs and inits */
+#define PAL_HALT		28	/* enter the low power HALT state */
+#define PAL_HALT_LIGHT		29	/* enter the low power light halt state*/
+#define PAL_COPY_INFO		30	/* returns info needed to relocate PAL */
+#define PAL_CACHE_LINE_INIT	31	/* init tags & data of cache line */
+#define PAL_PMI_ENTRYPOINT	32	/* register PMI memory entry points with the processor */
+#define PAL_ENTER_IA_32_ENV	33	/* enter IA-32 system environment */
+#define PAL_VM_PAGE_SIZE	34	/* return vm TC and page walker page sizes */
+
+#define PAL_MEM_FOR_TEST	37	/* get amount of memory needed for late processor test */
+#define PAL_CACHE_PROT_INFO	38	/* get i/d cache protection info */
+#define PAL_REGISTER_INFO	39	/* return AR and CR register information*/
+#define PAL_SHUTDOWN		40	/* enter processor shutdown state */
+#define PAL_PREFETCH_VISIBILITY	41	/* Make Processor Prefetches Visible */
+
+#define PAL_COPY_PAL		256	/* relocate PAL procedures and PAL PMI */
+#define PAL_HALT_INFO		257	/* return the low power capabilities of processor */
+#define PAL_TEST_PROC		258	/* perform late processor self-test */
+#define PAL_CACHE_READ		259	/* read tag & data of cacheline for diagnostic testing */
+#define PAL_CACHE_WRITE		260	/* write tag & data of cacheline for diagnostic testing */
+#define PAL_VM_TR_READ		261	/* read contents of translation register */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm/fpu.h>
+
+/*
+ * Data types needed to pass information into PAL procedures and
+ * interpret information returned by them.
+ */
+
+/* Return status from the PAL procedure */
+typedef s64				pal_status_t;
+
+#define PAL_STATUS_SUCCESS		0	/* No error */
+#define PAL_STATUS_UNIMPLEMENTED	(-1)	/* Unimplemented procedure */
+#define PAL_STATUS_EINVAL		(-2)	/* Invalid argument */
+#define PAL_STATUS_ERROR		(-3)	/* Error */
+#define PAL_STATUS_CACHE_INIT_FAIL	(-4)	/* Could not initialize the
+						 * specified level and type of
+						 * cache without sideeffects
+						 * and "restrict" was 1
+						 */
+
+/* Processor cache level in the heirarchy */
+typedef u64				pal_cache_level_t;
+#define PAL_CACHE_LEVEL_L0		0	/* L0 */
+#define PAL_CACHE_LEVEL_L1		1	/* L1 */
+#define PAL_CACHE_LEVEL_L2		2	/* L2 */
+
+
+/* Processor cache type at a particular level in the heirarchy */
+
+typedef u64				pal_cache_type_t;
+#define PAL_CACHE_TYPE_INSTRUCTION	1	/* Instruction cache */
+#define PAL_CACHE_TYPE_DATA		2	/* Data or unified cache */
+#define PAL_CACHE_TYPE_INSTRUCTION_DATA	3	/* Both Data & Instruction */
+
+
+#define PAL_CACHE_FLUSH_INVALIDATE	1	/* Invalidate clean lines */
+#define PAL_CACHE_FLUSH_CHK_INTRS	2	/* check for interrupts/mc while flushing */
+
+/* Processor cache line size in bytes  */
+typedef int				pal_cache_line_size_t;
+
+/* Processor cache line state */
+typedef u64				pal_cache_line_state_t;
+#define PAL_CACHE_LINE_STATE_INVALID	0	/* Invalid */
+#define PAL_CACHE_LINE_STATE_SHARED	1	/* Shared */
+#define PAL_CACHE_LINE_STATE_EXCLUSIVE	2	/* Exclusive */
+#define PAL_CACHE_LINE_STATE_MODIFIED	3	/* Modified */
+
+typedef struct pal_freq_ratio {
+	u64 den : 32, num : 32;	/* numerator & denominator */
+} itc_ratio, proc_ratio;
+
+typedef	union  pal_cache_config_info_1_s {
+	struct {
+		u64		u		: 1,	/* 0 Unified cache ? */
+				at		: 2,	/* 2-1 Cache mem attr*/
+				reserved	: 5,	/* 7-3 Reserved */
+				associativity	: 8,	/* 16-8 Associativity*/
+				line_size	: 8,	/* 23-17 Line size */
+				stride		: 8,	/* 31-24 Stride */
+				store_latency	: 8,	/*39-32 Store latency*/
+				load_latency	: 8,	/* 47-40 Load latency*/
+				store_hints	: 8,	/* 55-48 Store hints*/
+				load_hints	: 8;	/* 63-56 Load hints */
+	} pcci1_bits;
+	u64			pcci1_data;
+} pal_cache_config_info_1_t;
+
+typedef	union  pal_cache_config_info_2_s {
+	struct {
+		u64		cache_size	: 32,	/*cache size in bytes*/
+
+
+				alias_boundary	: 8,	/* 39-32 aliased addr
+							 * separation for max
+							 * performance.
+							 */
+				tag_ls_bit	: 8,	/* 47-40 LSb of addr*/
+				tag_ms_bit	: 8,	/* 55-48 MSb of addr*/
+				reserved	: 8;	/* 63-56 Reserved */
+	} pcci2_bits;
+	u64			pcci2_data;
+} pal_cache_config_info_2_t;
+
+
+typedef struct pal_cache_config_info_s {
+	pal_status_t			pcci_status;
+	pal_cache_config_info_1_t	pcci_info_1;
+	pal_cache_config_info_2_t	pcci_info_2;
+	u64				pcci_reserved;
+} pal_cache_config_info_t;
+
+#define pcci_ld_hints		pcci_info_1.pcci1_bits.load_hints
+#define pcci_st_hints		pcci_info_1.pcci1_bits.store_hints
+#define pcci_ld_latency		pcci_info_1.pcci1_bits.load_latency
+#define pcci_st_latency		pcci_info_1.pcci1_bits.store_latency
+#define pcci_stride		pcci_info_1.pcci1_bits.stride
+#define pcci_line_size		pcci_info_1.pcci1_bits.line_size
+#define pcci_assoc		pcci_info_1.pcci1_bits.associativity
+#define pcci_cache_attr		pcci_info_1.pcci1_bits.at
+#define pcci_unified		pcci_info_1.pcci1_bits.u
+#define pcci_tag_msb		pcci_info_2.pcci2_bits.tag_ms_bit
+#define pcci_tag_lsb		pcci_info_2.pcci2_bits.tag_ls_bit
+#define pcci_alias_boundary	pcci_info_2.pcci2_bits.alias_boundary
+#define pcci_cache_size		pcci_info_2.pcci2_bits.cache_size
+
+
+
+/* Possible values for cache attributes */
+
+#define PAL_CACHE_ATTR_WT		0	/* Write through cache */
+#define PAL_CACHE_ATTR_WB		1	/* Write back cache */
+#define PAL_CACHE_ATTR_WT_OR_WB		2	/* Either write thru or write
+						 * back depending on TLB
+						 * memory attributes
+						 */
+
+
+/* Possible values for cache hints */
+
+#define PAL_CACHE_HINT_TEMP_1		0	/* Temporal level 1 */
+#define PAL_CACHE_HINT_NTEMP_1		1	/* Non-temporal level 1 */
+#define PAL_CACHE_HINT_NTEMP_ALL	3	/* Non-temporal all levels */
+
+/* Processor cache protection  information */
+typedef union pal_cache_protection_element_u {
+	u32			pcpi_data;
+	struct {
+		u32		data_bits	: 8, /* # data bits covered by
+						      * each unit of protection
+						      */
+
+				tagprot_lsb	: 6, /* Least -do- */
+				tagprot_msb	: 6, /* Most Sig. tag address
+						      * bit that this
+						      * protection covers.
+						      */
+				prot_bits	: 6, /* # of protection bits */
+				method		: 4, /* Protection method */
+				t_d		: 2; /* Indicates which part
+						      * of the cache this
+						      * protection encoding
+						      * applies.
+						      */
+	} pcp_info;
+} pal_cache_protection_element_t;
+
+#define pcpi_cache_prot_part	pcp_info.t_d
+#define pcpi_prot_method	pcp_info.method
+#define pcpi_prot_bits		pcp_info.prot_bits
+#define pcpi_tagprot_msb	pcp_info.tagprot_msb
+#define pcpi_tagprot_lsb	pcp_info.tagprot_lsb
+#define pcpi_data_bits		pcp_info.data_bits
+
+/* Processor cache part encodings */
+#define PAL_CACHE_PROT_PART_DATA	0	/* Data protection  */
+#define PAL_CACHE_PROT_PART_TAG		1	/* Tag  protection */
+#define PAL_CACHE_PROT_PART_TAG_DATA	2	/* Tag+data protection (tag is
+						 * more significant )
+						 */
+#define PAL_CACHE_PROT_PART_DATA_TAG	3	/* Data+tag protection (data is
+						 * more significant )
+						 */
+#define PAL_CACHE_PROT_PART_MAX		6
+
+
+typedef struct pal_cache_protection_info_s {
+	pal_status_t			pcpi_status;
+	pal_cache_protection_element_t	pcp_info[PAL_CACHE_PROT_PART_MAX];
+} pal_cache_protection_info_t;
+
+
+/* Processor cache protection method encodings */
+#define PAL_CACHE_PROT_METHOD_NONE		0	/* No protection */
+#define PAL_CACHE_PROT_METHOD_ODD_PARITY	1	/* Odd parity */
+#define PAL_CACHE_PROT_METHOD_EVEN_PARITY	2	/* Even parity */
+#define PAL_CACHE_PROT_METHOD_ECC		3	/* ECC protection */
+
+
+/* Processor cache line identification in the heirarchy */
+typedef union pal_cache_line_id_u {
+	u64			pclid_data;
+	struct {
+		u64		cache_type	: 8,	/* 7-0 cache type */
+				level		: 8,	/* 15-8 level of the
+							 * cache in the
+							 * heirarchy.
+							 */
+				way		: 8,	/* 23-16 way in the set
+							 */
+				part		: 8,	/* 31-24 part of the
+							 * cache
+							 */
+				reserved	: 32;	/* 63-32 is reserved*/
+	} pclid_info_read;
+	struct {
+		u64		cache_type	: 8,	/* 7-0 cache type */
+				level		: 8,	/* 15-8 level of the
+							 * cache in the
+							 * heirarchy.
+							 */
+				way		: 8,	/* 23-16 way in the set
+							 */
+				part		: 8,	/* 31-24 part of the
+							 * cache
+							 */
+				mesi		: 8,	/* 39-32 cache line
+							 * state
+							 */
+				start		: 8,	/* 47-40 lsb of data to
+							 * invert
+							 */
+				length		: 8,	/* 55-48 #bits to
+							 * invert
+							 */
+				trigger		: 8;	/* 63-56 Trigger error
+							 * by doing a load
+							 * after the write
+							 */
+
+	} pclid_info_write;
+} pal_cache_line_id_u_t;
+
+#define pclid_read_part		pclid_info_read.part
+#define pclid_read_way		pclid_info_read.way
+#define pclid_read_level	pclid_info_read.level
+#define pclid_read_cache_type	pclid_info_read.cache_type
+
+#define pclid_write_trigger	pclid_info_write.trigger
+#define pclid_write_length	pclid_info_write.length
+#define pclid_write_start	pclid_info_write.start
+#define pclid_write_mesi	pclid_info_write.mesi
+#define pclid_write_part	pclid_info_write.part
+#define pclid_write_way		pclid_info_write.way
+#define pclid_write_level	pclid_info_write.level
+#define pclid_write_cache_type	pclid_info_write.cache_type
+
+/* Processor cache line part encodings */
+#define PAL_CACHE_LINE_ID_PART_DATA		0	/* Data */
+#define PAL_CACHE_LINE_ID_PART_TAG		1	/* Tag */
+#define PAL_CACHE_LINE_ID_PART_DATA_PROT	2	/* Data protection */
+#define PAL_CACHE_LINE_ID_PART_TAG_PROT		3	/* Tag protection */
+#define PAL_CACHE_LINE_ID_PART_DATA_TAG_PROT	4	/* Data+tag
+							 * protection
+							 */
+typedef struct pal_cache_line_info_s {
+	pal_status_t		pcli_status;		/* Return status of the read cache line
+							 * info call.
+							 */
+	u64			pcli_data;		/* 64-bit data, tag, protection bits .. */
+	u64			pcli_data_len;		/* data length in bits */
+	pal_cache_line_state_t	pcli_cache_line_state;	/* mesi state */
+
+} pal_cache_line_info_t;
+
+
+/* Machine Check related crap */
+
+/* Pending event status bits  */
+typedef u64					pal_mc_pending_events_t;
+
+#define PAL_MC_PENDING_MCA			(1 << 0)
+#define PAL_MC_PENDING_INIT			(1 << 1)
+
+/* Error information type */
+typedef u64					pal_mc_info_index_t;
+
+#define PAL_MC_INFO_PROCESSOR			0	/* Processor */
+#define PAL_MC_INFO_CACHE_CHECK			1	/* Cache check */
+#define PAL_MC_INFO_TLB_CHECK			2	/* Tlb check */
+#define PAL_MC_INFO_BUS_CHECK			3	/* Bus check */
+#define PAL_MC_INFO_REQ_ADDR			4	/* Requestor address */
+#define PAL_MC_INFO_RESP_ADDR			5	/* Responder address */
+#define PAL_MC_INFO_TARGET_ADDR			6	/* Target address */
+#define PAL_MC_INFO_IMPL_DEP			7	/* Implementation
+							 * dependent
+							 */
+
+
+typedef struct pal_process_state_info_s {
+	u64		reserved1	: 2,
+			rz		: 1,	/* PAL_CHECK processor
+						 * rendezvous
+						 * successful.
+						 */
+
+			ra		: 1,	/* PAL_CHECK attempted
+						 * a rendezvous.
+						 */
+			me		: 1,	/* Distinct multiple
+						 * errors occurred
+						 */
+
+			mn		: 1,	/* Min. state save
+						 * area has been
+						 * registered with PAL
+						 */
+
+			sy		: 1,	/* Storage integrity
+						 * synched
+						 */
+
+
+			co		: 1,	/* Continuable */
+			ci		: 1,	/* MC isolated */
+			us		: 1,	/* Uncontained storage
+						 * damage.
+						 */
+
+
+			hd		: 1,	/* Non-essential hw
+						 * lost (no loss of
+						 * functionality)
+						 * causing the
+						 * processor to run in
+						 * degraded mode.
+						 */
+
+			tl		: 1,	/* 1 => MC occurred
+						 * after an instr was
+						 * executed but before
+						 * the trap that
+						 * resulted from instr
+						 * execution was
+						 * generated.
+						 * (Trap Lost )
+						 */
+			mi		: 1,	/* More information available
+						 * call PAL_MC_ERROR_INFO
+						 */
+			pi		: 1,	/* Precise instruction pointer */
+			pm		: 1,	/* Precise min-state save area */
+
+			dy		: 1,	/* Processor dynamic
+						 * state valid
+						 */
+
+
+			in		: 1,	/* 0 = MC, 1 = INIT */
+			rs		: 1,	/* RSE valid */
+			cm		: 1,	/* MC corrected */
+			ex		: 1,	/* MC is expected */
+			cr		: 1,	/* Control regs valid*/
+			pc		: 1,	/* Perf cntrs valid */
+			dr		: 1,	/* Debug regs valid */
+			tr		: 1,	/* Translation regs
+						 * valid
+						 */
+			rr		: 1,	/* Region regs valid */
+			ar		: 1,	/* App regs valid */
+			br		: 1,	/* Branch regs valid */
+			pr		: 1,	/* Predicate registers
+						 * valid
+						 */
+
+			fp		: 1,	/* fp registers valid*/
+			b1		: 1,	/* Preserved bank one
+						 * general registers
+						 * are valid
+						 */
+			b0		: 1,	/* Preserved bank zero
+						 * general registers
+						 * are valid
+						 */
+			gr		: 1,	/* General registers
+						 * are valid
+						 * (excl. banked regs)
+						 */
+			dsize		: 16,	/* size of dynamic
+						 * state returned
+						 * by the processor
+						 */
+
+			reserved2	: 11,
+			cc		: 1,	/* Cache check */
+			tc		: 1,	/* TLB check */
+			bc		: 1,	/* Bus check */
+			rc		: 1,	/* Register file check */
+			uc		: 1;	/* Uarch check */
+
+} pal_processor_state_info_t;
+
+typedef struct pal_cache_check_info_s {
+	u64		op		: 4,	/* Type of cache
+						 * operation that
+						 * caused the machine
+						 * check.
+						 */
+			level		: 2,	/* Cache level */
+			reserved1	: 2,
+			dl		: 1,	/* Failure in data part
+						 * of cache line
+						 */
+			tl		: 1,	/* Failure in tag part
+						 * of cache line
+						 */
+			dc		: 1,	/* Failure in dcache */
+			ic		: 1,	/* Failure in icache */
+			mesi		: 3,	/* Cache line state */
+			mv		: 1,	/* mesi valid */
+			way		: 5,	/* Way in which the
+						 * error occurred
+						 */
+			wiv		: 1,	/* Way field valid */
+			reserved2	: 10,
+
+			index		: 20,	/* Cache line index */
+			reserved3	: 2,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_cache_check_info_t;
+
+typedef struct pal_tlb_check_info_s {
+
+	u64		tr_slot		: 8,	/* Slot# of TR where
+						 * error occurred
+						 */
+			trv		: 1,	/* tr_slot field is valid */
+			reserved1	: 1,
+			level		: 2,	/* TLB level where failure occurred */
+			reserved2	: 4,
+			dtr		: 1,	/* Fail in data TR */
+			itr		: 1,	/* Fail in inst TR */
+			dtc		: 1,	/* Fail in data TC */
+			itc		: 1,	/* Fail in inst. TC */
+			op		: 4,	/* Cache operation */
+			reserved3	: 30,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_tlb_check_info_t;
+
+typedef struct pal_bus_check_info_s {
+	u64		size		: 5,	/* Xaction size */
+			ib		: 1,	/* Internal bus error */
+			eb		: 1,	/* External bus error */
+			cc		: 1,	/* Error occurred
+						 * during cache-cache
+						 * transfer.
+						 */
+			type		: 8,	/* Bus xaction type*/
+			sev		: 5,	/* Bus error severity*/
+			hier		: 2,	/* Bus hierarchy level */
+			reserved1	: 1,
+			bsi		: 8,	/* Bus error status
+						 * info
+						 */
+			reserved2	: 22,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_bus_check_info_t;
+
+typedef struct pal_reg_file_check_info_s {
+	u64		id		: 4,	/* Register file identifier */
+			op		: 4,	/* Type of register
+						 * operation that
+						 * caused the machine
+						 * check.
+						 */
+			reg_num		: 7,	/* Register number */
+			rnv		: 1,	/* reg_num valid */
+			reserved2	: 38,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			reserved3	: 3,
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_reg_file_check_info_t;
+
+typedef struct pal_uarch_check_info_s {
+	u64		sid		: 5,	/* Structure identification */
+			level		: 3,	/* Level of failure */
+			array_id	: 4,	/* Array identification */
+			op		: 4,	/* Type of
+						 * operation that
+						 * caused the machine
+						 * check.
+						 */
+			way		: 6,	/* Way of structure */
+			wv		: 1,	/* way valid */
+			xv		: 1,	/* index valid */
+			reserved1	: 8,
+			index		: 8,	/* Index or set of the uarch
+						 * structure that failed.
+						 */
+			reserved2	: 24,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_uarch_check_info_t;
+
+typedef union pal_mc_error_info_u {
+	u64				pmei_data;
+	pal_processor_state_info_t	pme_processor;
+	pal_cache_check_info_t		pme_cache;
+	pal_tlb_check_info_t		pme_tlb;
+	pal_bus_check_info_t		pme_bus;
+	pal_reg_file_check_info_t	pme_reg_file;
+	pal_uarch_check_info_t		pme_uarch;
+} pal_mc_error_info_t;
+
+#define pmci_proc_unknown_check			pme_processor.uc
+#define pmci_proc_bus_check			pme_processor.bc
+#define pmci_proc_tlb_check			pme_processor.tc
+#define pmci_proc_cache_check			pme_processor.cc
+#define pmci_proc_dynamic_state_size		pme_processor.dsize
+#define pmci_proc_gpr_valid			pme_processor.gr
+#define pmci_proc_preserved_bank0_gpr_valid	pme_processor.b0
+#define pmci_proc_preserved_bank1_gpr_valid	pme_processor.b1
+#define pmci_proc_fp_valid			pme_processor.fp
+#define pmci_proc_predicate_regs_valid		pme_processor.pr
+#define pmci_proc_branch_regs_valid		pme_processor.br
+#define pmci_proc_app_regs_valid		pme_processor.ar
+#define pmci_proc_region_regs_valid		pme_processor.rr
+#define pmci_proc_translation_regs_valid	pme_processor.tr
+#define pmci_proc_debug_regs_valid		pme_processor.dr
+#define pmci_proc_perf_counters_valid		pme_processor.pc
+#define pmci_proc_control_regs_valid		pme_processor.cr
+#define pmci_proc_machine_check_expected	pme_processor.ex
+#define pmci_proc_machine_check_corrected	pme_processor.cm
+#define pmci_proc_rse_valid			pme_processor.rs
+#define pmci_proc_machine_check_or_init		pme_processor.in
+#define pmci_proc_dynamic_state_valid		pme_processor.dy
+#define pmci_proc_operation			pme_processor.op
+#define pmci_proc_trap_lost			pme_processor.tl
+#define pmci_proc_hardware_damage		pme_processor.hd
+#define pmci_proc_uncontained_storage_damage	pme_processor.us
+#define pmci_proc_machine_check_isolated	pme_processor.ci
+#define pmci_proc_continuable			pme_processor.co
+#define pmci_proc_storage_intergrity_synced	pme_processor.sy
+#define pmci_proc_min_state_save_area_regd	pme_processor.mn
+#define	pmci_proc_distinct_multiple_errors	pme_processor.me
+#define pmci_proc_pal_attempted_rendezvous	pme_processor.ra
+#define pmci_proc_pal_rendezvous_complete	pme_processor.rz
+
+
+#define pmci_cache_level			pme_cache.level
+#define pmci_cache_line_state			pme_cache.mesi
+#define pmci_cache_line_state_valid		pme_cache.mv
+#define pmci_cache_line_index			pme_cache.index
+#define pmci_cache_instr_cache_fail		pme_cache.ic
+#define pmci_cache_data_cache_fail		pme_cache.dc
+#define pmci_cache_line_tag_fail		pme_cache.tl
+#define pmci_cache_line_data_fail		pme_cache.dl
+#define pmci_cache_operation			pme_cache.op
+#define pmci_cache_way_valid			pme_cache.wv
+#define pmci_cache_target_address_valid		pme_cache.tv
+#define pmci_cache_way				pme_cache.way
+#define pmci_cache_mc				pme_cache.mc
+
+#define pmci_tlb_instr_translation_cache_fail	pme_tlb.itc
+#define pmci_tlb_data_translation_cache_fail	pme_tlb.dtc
+#define pmci_tlb_instr_translation_reg_fail	pme_tlb.itr
+#define pmci_tlb_data_translation_reg_fail	pme_tlb.dtr
+#define pmci_tlb_translation_reg_slot		pme_tlb.tr_slot
+#define pmci_tlb_mc				pme_tlb.mc
+
+#define pmci_bus_status_info			pme_bus.bsi
+#define pmci_bus_req_address_valid		pme_bus.rq
+#define pmci_bus_resp_address_valid		pme_bus.rp
+#define pmci_bus_target_address_valid		pme_bus.tv
+#define pmci_bus_error_severity			pme_bus.sev
+#define pmci_bus_transaction_type		pme_bus.type
+#define pmci_bus_cache_cache_transfer		pme_bus.cc
+#define pmci_bus_transaction_size		pme_bus.size
+#define pmci_bus_internal_error			pme_bus.ib
+#define pmci_bus_external_error			pme_bus.eb
+#define pmci_bus_mc				pme_bus.mc
+
+/*
+ * NOTE: this min_state_save area struct only includes the 1KB
+ * architectural state save area.  The other 3 KB is scratch space
+ * for PAL.
+ */
+
+typedef struct pal_min_state_area_s {
+	u64	pmsa_nat_bits;		/* nat bits for saved GRs  */
+	u64	pmsa_gr[15];		/* GR1	- GR15		   */
+	u64	pmsa_bank0_gr[16];	/* GR16 - GR31		   */
+	u64	pmsa_bank1_gr[16];	/* GR16 - GR31		   */
+	u64	pmsa_pr;		/* predicate registers	   */
+	u64	pmsa_br0;		/* branch register 0	   */
+	u64	pmsa_rsc;		/* ar.rsc		   */
+	u64	pmsa_iip;		/* cr.iip		   */
+	u64	pmsa_ipsr;		/* cr.ipsr		   */
+	u64	pmsa_ifs;		/* cr.ifs		   */
+	u64	pmsa_xip;		/* previous iip		   */
+	u64	pmsa_xpsr;		/* previous psr		   */
+	u64	pmsa_xfs;		/* previous ifs		   */
+	u64	pmsa_br1;		/* branch register 1	   */
+	u64	pmsa_reserved[70];	/* pal_min_state_area should total to 1KB */
+} pal_min_state_area_t;
+
+
+struct ia64_pal_retval {
+	/*
+	 * A zero status value indicates call completed without error.
+	 * A negative status value indicates reason of call failure.
+	 * A positive status value indicates success but an
+	 * informational value should be printed (e.g., "reboot for
+	 * change to take effect").
+	 */
+	s64 status;
+	u64 v0;
+	u64 v1;
+	u64 v2;
+};
+
+/*
+ * Note: Currently unused PAL arguments are generally labeled
+ * "reserved" so the value specified in the PAL documentation
+ * (generally 0) MUST be passed.  Reserved parameters are not optional
+ * parameters.
+ */
+extern struct ia64_pal_retval ia64_pal_call_static (u64, u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_stacked (u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_phys_static (u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_phys_stacked (u64, u64, u64, u64);
+extern void ia64_save_scratch_fpregs (struct ia64_fpreg *);
+extern void ia64_load_scratch_fpregs (struct ia64_fpreg *);
+
+#define PAL_CALL(iprv,a0,a1,a2,a3) do {			\
+	struct ia64_fpreg fr[6];			\
+	ia64_save_scratch_fpregs(fr);			\
+	iprv = ia64_pal_call_static(a0, a1, a2, a3, 0);	\
+	ia64_load_scratch_fpregs(fr);			\
+} while (0)
+
+#define PAL_CALL_IC_OFF(iprv,a0,a1,a2,a3) do {		\
+	struct ia64_fpreg fr[6];			\
+	ia64_save_scratch_fpregs(fr);			\
+	iprv = ia64_pal_call_static(a0, a1, a2, a3, 1);	\
+	ia64_load_scratch_fpregs(fr);			\
+} while (0)
+
+#define PAL_CALL_STK(iprv,a0,a1,a2,a3) do {		\
+	struct ia64_fpreg fr[6];			\
+	ia64_save_scratch_fpregs(fr);			\
+	iprv = ia64_pal_call_stacked(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);			\
+} while (0)
+
+#define PAL_CALL_PHYS(iprv,a0,a1,a2,a3) do {			\
+	struct ia64_fpreg fr[6];				\
+	ia64_save_scratch_fpregs(fr);				\
+	iprv = ia64_pal_call_phys_static(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);				\
+} while (0)
+
+#define PAL_CALL_PHYS_STK(iprv,a0,a1,a2,a3) do {		\
+	struct ia64_fpreg fr[6];				\
+	ia64_save_scratch_fpregs(fr);				\
+	iprv = ia64_pal_call_phys_stacked(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);				\
+} while (0)
+
+typedef int (*ia64_pal_handler) (u64, ...);
+extern ia64_pal_handler ia64_pal;
+extern void ia64_pal_handler_init (void *);
+
+extern ia64_pal_handler ia64_pal;
+
+extern pal_cache_config_info_t		l0d_cache_config_info;
+extern pal_cache_config_info_t		l0i_cache_config_info;
+extern pal_cache_config_info_t		l1_cache_config_info;
+extern pal_cache_config_info_t		l2_cache_config_info;
+
+extern pal_cache_protection_info_t	l0d_cache_protection_info;
+extern pal_cache_protection_info_t	l0i_cache_protection_info;
+extern pal_cache_protection_info_t	l1_cache_protection_info;
+extern pal_cache_protection_info_t	l2_cache_protection_info;
+
+extern pal_cache_config_info_t		pal_cache_config_info_get(pal_cache_level_t,
+								  pal_cache_type_t);
+
+extern pal_cache_protection_info_t	pal_cache_protection_info_get(pal_cache_level_t,
+								      pal_cache_type_t);
+
+
+extern void				pal_error(int);
+
+
+/* Useful wrappers for the current list of pal procedures */
+
+typedef union pal_bus_features_u {
+	u64	pal_bus_features_val;
+	struct {
+		u64	pbf_reserved1				:	29;
+		u64	pbf_req_bus_parking			:	1;
+		u64	pbf_bus_lock_mask			:	1;
+		u64	pbf_enable_half_xfer_rate		:	1;
+		u64	pbf_reserved2				:	22;
+		u64	pbf_disable_xaction_queueing		:	1;
+		u64	pbf_disable_resp_err_check		:	1;
+		u64	pbf_disable_berr_check			:	1;
+		u64	pbf_disable_bus_req_internal_err_signal	:	1;
+		u64	pbf_disable_bus_req_berr_signal		:	1;
+		u64	pbf_disable_bus_init_event_check	:	1;
+		u64	pbf_disable_bus_init_event_signal	:	1;
+		u64	pbf_disable_bus_addr_err_check		:	1;
+		u64	pbf_disable_bus_addr_err_signal		:	1;
+		u64	pbf_disable_bus_data_err_check		:	1;
+	} pal_bus_features_s;
+} pal_bus_features_u_t;
+
+extern void pal_bus_features_print (u64);
+
+/* Provide information about configurable processor bus features */
+static inline s64
+ia64_pal_bus_get_features (pal_bus_features_u_t *features_avail,
+			   pal_bus_features_u_t *features_status,
+			   pal_bus_features_u_t *features_control)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_BUS_GET_FEATURES, 0, 0, 0);
+	if (features_avail)
+		features_avail->pal_bus_features_val = iprv.v0;
+	if (features_status)
+		features_status->pal_bus_features_val = iprv.v1;
+	if (features_control)
+		features_control->pal_bus_features_val = iprv.v2;
+	return iprv.status;
+}
+
+/* Enables/disables specific processor bus features */
+static inline s64
+ia64_pal_bus_set_features (pal_bus_features_u_t feature_select)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_BUS_SET_FEATURES, feature_select.pal_bus_features_val, 0, 0);
+	return iprv.status;
+}
+
+/* Get detailed cache information */
+static inline s64
+ia64_pal_cache_config_info (u64 cache_level, u64 cache_type, pal_cache_config_info_t *conf)
+{
+	struct ia64_pal_retval iprv;
+
+	PAL_CALL(iprv, PAL_CACHE_INFO, cache_level, cache_type, 0);
+
+	if (iprv.status == 0) {
+		conf->pcci_status                 = iprv.status;
+		conf->pcci_info_1.pcci1_data      = iprv.v0;
+		conf->pcci_info_2.pcci2_data      = iprv.v1;
+		conf->pcci_reserved               = iprv.v2;
+	}
+	return iprv.status;
+
+}
+
+/* Get detailed cche protection information */
+static inline s64
+ia64_pal_cache_prot_info (u64 cache_level, u64 cache_type, pal_cache_protection_info_t *prot)
+{
+	struct ia64_pal_retval iprv;
+
+	PAL_CALL(iprv, PAL_CACHE_PROT_INFO, cache_level, cache_type, 0);
+
+	if (iprv.status == 0) {
+		prot->pcpi_status           = iprv.status;
+		prot->pcp_info[0].pcpi_data = iprv.v0 & 0xffffffff;
+		prot->pcp_info[1].pcpi_data = iprv.v0 >> 32;
+		prot->pcp_info[2].pcpi_data = iprv.v1 & 0xffffffff;
+		prot->pcp_info[3].pcpi_data = iprv.v1 >> 32;
+		prot->pcp_info[4].pcpi_data = iprv.v2 & 0xffffffff;
+		prot->pcp_info[5].pcpi_data = iprv.v2 >> 32;
+	}
+	return iprv.status;
+}
+
+/*
+ * Flush the processor instruction or data caches.  *PROGRESS must be
+ * initialized to zero before calling this for the first time..
+ */
+static inline s64
+ia64_pal_cache_flush (u64 cache_type, u64 invalidate, u64 *progress, u64 *vector)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_IC_OFF(iprv, PAL_CACHE_FLUSH, cache_type, invalidate, *progress);
+	if (vector)
+		*vector = iprv.v0;
+	*progress = iprv.v1;
+	return iprv.status;
+}
+
+
+/* Initialize the processor controlled caches */
+static inline s64
+ia64_pal_cache_init (u64 level, u64 cache_type, u64 rest)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_INIT, level, cache_type, rest);
+	return iprv.status;
+}
+
+/* Initialize the tags and data of a data or unified cache line of
+ * processor controlled cache to known values without the availability
+ * of backing memory.
+ */
+static inline s64
+ia64_pal_cache_line_init (u64 physical_addr, u64 data_value)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_LINE_INIT, physical_addr, data_value, 0);
+	return iprv.status;
+}
+
+
+/* Read the data and tag of a processor controlled cache line for diags */
+static inline s64
+ia64_pal_cache_read (pal_cache_line_id_u_t line_id, u64 physical_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_READ, line_id.pclid_data, physical_addr, 0);
+	return iprv.status;
+}
+
+/* Return summary information about the heirarchy of caches controlled by the processor */
+static inline s64
+ia64_pal_cache_summary (u64 *cache_levels, u64 *unique_caches)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_SUMMARY, 0, 0, 0);
+	if (cache_levels)
+		*cache_levels = iprv.v0;
+	if (unique_caches)
+		*unique_caches = iprv.v1;
+	return iprv.status;
+}
+
+/* Write the data and tag of a processor-controlled cache line for diags */
+static inline s64
+ia64_pal_cache_write (pal_cache_line_id_u_t line_id, u64 physical_addr, u64 data)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_WRITE, line_id.pclid_data, physical_addr, data);
+	return iprv.status;
+}
+
+
+/* Return the parameters needed to copy relocatable PAL procedures from ROM to memory */
+static inline s64
+ia64_pal_copy_info (u64 copy_type, u64 num_procs, u64 num_iopics,
+		    u64 *buffer_size, u64 *buffer_align)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_COPY_INFO, copy_type, num_procs, num_iopics);
+	if (buffer_size)
+		*buffer_size = iprv.v0;
+	if (buffer_align)
+		*buffer_align = iprv.v1;
+	return iprv.status;
+}
+
+/* Copy relocatable PAL procedures from ROM to memory */
+static inline s64
+ia64_pal_copy_pal (u64 target_addr, u64 alloc_size, u64 processor, u64 *pal_proc_offset)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_COPY_PAL, target_addr, alloc_size, processor);
+	if (pal_proc_offset)
+		*pal_proc_offset = iprv.v0;
+	return iprv.status;
+}
+
+/* Return the number of instruction and data debug register pairs */
+static inline s64
+ia64_pal_debug_info (u64 *inst_regs,  u64 *data_regs)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_DEBUG_INFO, 0, 0, 0);
+	if (inst_regs)
+		*inst_regs = iprv.v0;
+	if (data_regs)
+		*data_regs = iprv.v1;
+
+	return iprv.status;
+}
+
+#ifdef TBD
+/* Switch from IA64-system environment to IA-32 system environment */
+static inline s64
+ia64_pal_enter_ia32_env (ia32_env1, ia32_env2, ia32_env3)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_ENTER_IA_32_ENV, ia32_env1, ia32_env2, ia32_env3);
+	return iprv.status;
+}
+#endif
+
+/* Get unique geographical address of this processor on its bus */
+static inline s64
+ia64_pal_fixed_addr (u64 *global_unique_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_FIXED_ADDR, 0, 0, 0);
+	if (global_unique_addr)
+		*global_unique_addr = iprv.v0;
+	return iprv.status;
+}
+
+/* Get base frequency of the platform if generated by the processor */
+static inline s64
+ia64_pal_freq_base (u64 *platform_base_freq)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_FREQ_BASE, 0, 0, 0);
+	if (platform_base_freq)
+		*platform_base_freq = iprv.v0;
+	return iprv.status;
+}
+
+/*
+ * Get the ratios for processor frequency, bus frequency and interval timer to
+ * to base frequency of the platform
+ */
+static inline s64
+ia64_pal_freq_ratios (struct pal_freq_ratio *proc_ratio, struct pal_freq_ratio *bus_ratio,
+		      struct pal_freq_ratio *itc_ratio)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_FREQ_RATIOS, 0, 0, 0);
+	if (proc_ratio)
+		*(u64 *)proc_ratio = iprv.v0;
+	if (bus_ratio)
+		*(u64 *)bus_ratio = iprv.v1;
+	if (itc_ratio)
+		*(u64 *)itc_ratio = iprv.v2;
+	return iprv.status;
+}
+
+/* Make the processor enter HALT or one of the implementation dependent low
+ * power states where prefetching and execution are suspended and cache and
+ * TLB coherency is not maintained.
+ */
+static inline s64
+ia64_pal_halt (u64 halt_state)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_HALT, halt_state, 0, 0);
+	return iprv.status;
+}
+
+typedef union pal_power_mgmt_info_u {
+	u64			ppmi_data;
+	struct {
+	       u64		exit_latency		: 16,
+				entry_latency		: 16,
+				power_consumption	: 28,
+				im			: 1,
+				co			: 1,
+				reserved		: 2;
+	} pal_power_mgmt_info_s;
+} pal_power_mgmt_info_u_t;
+
+/* Return information about processor's optional power management capabilities. */
+static inline s64
+ia64_pal_halt_info (pal_power_mgmt_info_u_t *power_buf)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_STK(iprv, PAL_HALT_INFO, (unsigned long) power_buf, 0, 0);
+	return iprv.status;
+}
+
+/* Cause the processor to enter LIGHT HALT state, where prefetching and execution are
+ * suspended, but cache and TLB coherency is maintained.
+ */
+static inline s64
+ia64_pal_halt_light (void)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_HALT_LIGHT, 0, 0, 0);
+	return iprv.status;
+}
+
+/* Clear all the processor error logging   registers and reset the indicator that allows
+ * the error logging registers to be written. This procedure also checks the pending
+ * machine check bit and pending INIT bit and reports their states.
+ */
+static inline s64
+ia64_pal_mc_clear_log (u64 *pending_vector)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_CLEAR_LOG, 0, 0, 0);
+	if (pending_vector)
+		*pending_vector = iprv.v0;
+	return iprv.status;
+}
+
+/* Ensure that all outstanding transactions in a processor are completed or that any
+ * MCA due to thes outstanding transaction is taken.
+ */
+static inline s64
+ia64_pal_mc_drain (void)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_DRAIN, 0, 0, 0);
+	return iprv.status;
+}
+
+/* Return the machine check dynamic processor state */
+static inline s64
+ia64_pal_mc_dynamic_state (u64 offset, u64 *size, u64 *pds)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_DYNAMIC_STATE, offset, 0, 0);
+	if (size)
+		*size = iprv.v0;
+	if (pds)
+		*pds = iprv.v1;
+	return iprv.status;
+}
+
+/* Return processor machine check information */
+static inline s64
+ia64_pal_mc_error_info (u64 info_index, u64 type_index, u64 *size, u64 *error_info)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_ERROR_INFO, info_index, type_index, 0);
+	if (size)
+		*size = iprv.v0;
+	if (error_info)
+		*error_info = iprv.v1;
+	return iprv.status;
+}
+
+/* Inform PALE_CHECK whether a machine check is expected so that PALE_CHECK willnot
+ * attempt to correct any expected machine checks.
+ */
+static inline s64
+ia64_pal_mc_expected (u64 expected, u64 *previous)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_EXPECTED, expected, 0, 0);
+	if (previous)
+		*previous = iprv.v0;
+	return iprv.status;
+}
+
+/* Register a platform dependent location with PAL to which it can save
+ * minimal processor state in the event of a machine check or initialization
+ * event.
+ */
+static inline s64
+ia64_pal_mc_register_mem (u64 physical_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_REGISTER_MEM, physical_addr, 0, 0);
+	return iprv.status;
+}
+
+/* Restore minimal architectural processor state, set CMC interrupt if necessary
+ * and resume execution
+ */
+static inline s64
+ia64_pal_mc_resume (u64 set_cmci, u64 save_ptr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_RESUME, set_cmci, save_ptr, 0);
+	return iprv.status;
+}
+
+/* Return the memory attributes implemented by the processor */
+static inline s64
+ia64_pal_mem_attrib (u64 *mem_attrib)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MEM_ATTRIB, 0, 0, 0);
+	if (mem_attrib)
+		*mem_attrib = iprv.v0 & 0xff;
+	return iprv.status;
+}
+
+/* Return the amount of memory needed for second phase of processor
+ * self-test and the required alignment of memory.
+ */
+static inline s64
+ia64_pal_mem_for_test (u64 *bytes_needed, u64 *alignment)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MEM_FOR_TEST, 0, 0, 0);
+	if (bytes_needed)
+		*bytes_needed = iprv.v0;
+	if (alignment)
+		*alignment = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_perf_mon_info_u {
+	u64			  ppmi_data;
+	struct {
+	       u64		generic		: 8,
+				width		: 8,
+				cycles		: 8,
+				retired		: 8,
+				reserved	: 32;
+	} pal_perf_mon_info_s;
+} pal_perf_mon_info_u_t;
+
+/* Return the performance monitor information about what can be counted
+ * and how to configure the monitors to count the desired events.
+ */
+static inline s64
+ia64_pal_perf_mon_info (u64 *pm_buffer, pal_perf_mon_info_u_t *pm_info)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PERF_MON_INFO, (unsigned long) pm_buffer, 0, 0);
+	if (pm_info)
+		pm_info->ppmi_data = iprv.v0;
+	return iprv.status;
+}
+
+/* Specifies the physical address of the processor interrupt block
+ * and I/O port space.
+ */
+static inline s64
+ia64_pal_platform_addr (u64 type, u64 physical_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PLATFORM_ADDR, type, physical_addr, 0);
+	return iprv.status;
+}
+
+/* Set the SAL PMI entrypoint in memory */
+static inline s64
+ia64_pal_pmi_entrypoint (u64 sal_pmi_entry_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PMI_ENTRYPOINT, sal_pmi_entry_addr, 0, 0);
+	return iprv.status;
+}
+
+struct pal_features_s;
+/* Provide information about configurable processor features */
+static inline s64
+ia64_pal_proc_get_features (u64 *features_avail,
+			    u64 *features_status,
+			    u64 *features_control)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_PROC_GET_FEATURES, 0, 0, 0);
+	if (iprv.status == 0) {
+		*features_avail   = iprv.v0;
+		*features_status  = iprv.v1;
+		*features_control = iprv.v2;
+	}
+	return iprv.status;
+}
+
+/* Enable/disable processor dependent features */
+static inline s64
+ia64_pal_proc_set_features (u64 feature_select)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_PROC_SET_FEATURES, feature_select, 0, 0);
+	return iprv.status;
+}
+
+/*
+ * Put everything in a struct so we avoid the global offset table whenever
+ * possible.
+ */
+typedef struct ia64_ptce_info_s {
+	u64		base;
+	u32		count[2];
+	u32		stride[2];
+} ia64_ptce_info_t;
+
+/* Return the information required for the architected loop used to purge
+ * (initialize) the entire TC
+ */
+static inline s64
+ia64_get_ptce (ia64_ptce_info_t *ptce)
+{
+	struct ia64_pal_retval iprv;
+
+	if (!ptce)
+		return -1;
+
+	PAL_CALL(iprv, PAL_PTCE_INFO, 0, 0, 0);
+	if (iprv.status == 0) {
+		ptce->base = iprv.v0;
+		ptce->count[0] = iprv.v1 >> 32;
+		ptce->count[1] = iprv.v1 & 0xffffffff;
+		ptce->stride[0] = iprv.v2 >> 32;
+		ptce->stride[1] = iprv.v2 & 0xffffffff;
+	}
+	return iprv.status;
+}
+
+/* Return info about implemented application and control registers. */
+static inline s64
+ia64_pal_register_info (u64 info_request, u64 *reg_info_1, u64 *reg_info_2)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_REGISTER_INFO, info_request, 0, 0);
+	if (reg_info_1)
+		*reg_info_1 = iprv.v0;
+	if (reg_info_2)
+		*reg_info_2 = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_hints_u {
+	u64			ph_data;
+	struct {
+	       u64		si		: 1,
+				li		: 1,
+				reserved	: 62;
+	} pal_hints_s;
+} pal_hints_u_t;
+
+/* Return information about the register stack and RSE for this processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_rse_info (u64 *num_phys_stacked, pal_hints_u_t *hints)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_RSE_INFO, 0, 0, 0);
+	if (num_phys_stacked)
+		*num_phys_stacked = iprv.v0;
+	if (hints)
+		hints->ph_data = iprv.v1;
+	return iprv.status;
+}
+
+/* Cause the processor to enter	SHUTDOWN state, where prefetching and execution are
+ * suspended, but cause cache and TLB coherency to be maintained.
+ * This is usually called in IA-32 mode.
+ */
+static inline s64
+ia64_pal_shutdown (void)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_SHUTDOWN, 0, 0, 0);
+	return iprv.status;
+}
+
+/* Perform the second phase of processor self-test. */
+static inline s64
+ia64_pal_test_proc (u64 test_addr, u64 test_size, u64 attributes, u64 *self_test_state)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_TEST_PROC, test_addr, test_size, attributes);
+	if (self_test_state)
+		*self_test_state = iprv.v0;
+	return iprv.status;
+}
+
+typedef union  pal_version_u {
+	u64	pal_version_val;
+	struct {
+		u64	pv_pal_b_rev		:	8;
+		u64	pv_pal_b_model		:	8;
+		u64	pv_reserved1		:	8;
+		u64	pv_pal_vendor		:	8;
+		u64	pv_pal_a_rev		:	8;
+		u64	pv_pal_a_model		:	8;
+		u64	pv_reserved2		:	16;
+	} pal_version_s;
+} pal_version_u_t;
+
+
+/* Return PAL version information */
+static inline s64
+ia64_pal_version (pal_version_u_t *pal_min_version, pal_version_u_t *pal_cur_version)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_VERSION, 0, 0, 0);
+	if (pal_min_version)
+		pal_min_version->pal_version_val = iprv.v0;
+
+	if (pal_cur_version)
+		pal_cur_version->pal_version_val = iprv.v1;
+
+	return iprv.status;
+}
+
+typedef union pal_tc_info_u {
+	u64			pti_val;
+	struct {
+	       u64		num_sets	:	8,
+				associativity	:	8,
+				num_entries	:	16,
+				pf		:	1,
+				unified		:	1,
+				reduce_tr	:	1,
+				reserved	:	29;
+	} pal_tc_info_s;
+} pal_tc_info_u_t;
+
+#define tc_reduce_tr		pal_tc_info_s.reduce_tr
+#define tc_unified		pal_tc_info_s.unified
+#define tc_pf			pal_tc_info_s.pf
+#define tc_num_entries		pal_tc_info_s.num_entries
+#define tc_associativity	pal_tc_info_s.associativity
+#define tc_num_sets		pal_tc_info_s.num_sets
+
+
+/* Return information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_info (u64 tc_level, u64 tc_type,  pal_tc_info_u_t *tc_info, u64 *tc_pages)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VM_INFO, tc_level, tc_type, 0);
+	if (tc_info)
+		tc_info->pti_val = iprv.v0;
+	if (tc_pages)
+		*tc_pages = iprv.v1;
+	return iprv.status;
+}
+
+/* Get page size information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_page_size (u64 *tr_pages, u64 *vw_pages)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VM_PAGE_SIZE, 0, 0, 0);
+	if (tr_pages)
+		*tr_pages = iprv.v0;
+	if (vw_pages)
+		*vw_pages = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_vm_info_1_u {
+	u64			pvi1_val;
+	struct {
+		u64		vw		: 1,
+				phys_add_size	: 7,
+				key_size	: 8,
+				max_pkr		: 8,
+				hash_tag_id	: 8,
+				max_dtr_entry	: 8,
+				max_itr_entry	: 8,
+				max_unique_tcs	: 8,
+				num_tc_levels	: 8;
+	} pal_vm_info_1_s;
+} pal_vm_info_1_u_t;
+
+typedef union pal_vm_info_2_u {
+	u64			pvi2_val;
+	struct {
+		u64		impl_va_msb	: 8,
+				rid_size	: 8,
+				reserved	: 48;
+	} pal_vm_info_2_s;
+} pal_vm_info_2_u_t;
+
+/* Get summary information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_summary (pal_vm_info_1_u_t *vm_info_1, pal_vm_info_2_u_t *vm_info_2)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VM_SUMMARY, 0, 0, 0);
+	if (vm_info_1)
+		vm_info_1->pvi1_val = iprv.v0;
+	if (vm_info_2)
+		vm_info_2->pvi2_val = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_itr_valid_u {
+	u64			piv_val;
+	struct {
+	       u64		access_rights_valid	: 1,
+				priv_level_valid	: 1,
+				dirty_bit_valid		: 1,
+				mem_attr_valid		: 1,
+				reserved		: 60;
+	} pal_tr_valid_s;
+} pal_tr_valid_u_t;
+
+/* Read a translation register */
+static inline s64
+ia64_pal_tr_read (u64 reg_num, u64 tr_type, u64 *tr_buffer, pal_tr_valid_u_t *tr_valid)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS_STK(iprv, PAL_VM_TR_READ, reg_num, tr_type,(u64)ia64_tpa(tr_buffer));
+	if (tr_valid)
+		tr_valid->piv_val = iprv.v0;
+	return iprv.status;
+}
+
+/*
+ * PAL_PREFETCH_VISIBILITY transaction types
+ */
+#define PAL_VISIBILITY_VIRTUAL		0
+#define PAL_VISIBILITY_PHYSICAL		1
+
+/*
+ * PAL_PREFETCH_VISIBILITY return codes
+ */
+#define PAL_VISIBILITY_OK		1
+#define PAL_VISIBILITY_OK_REMOTE_NEEDED	0
+#define PAL_VISIBILITY_INVAL_ARG	-2
+#define PAL_VISIBILITY_ERROR		-3
+
+static inline s64
+ia64_pal_prefetch_visibility (s64 trans_type)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PREFETCH_VISIBILITY, trans_type, 0, 0);
+	return iprv.status;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PAL_H */
diff --git a/include/asm-ia64/param.h b/include/asm-ia64/param.h
new file mode 100644
index 000000000000..6c6b679b7a9e
--- /dev/null
+++ b/include/asm-ia64/param.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_IA64_PARAM_H
+#define _ASM_IA64_PARAM_H
+
+/*
+ * Fundamental kernel parameters.
+ *
+ * Based on <asm-i386/param.h>.
+ *
+ * Modified 1998, 1999, 2002-2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define EXEC_PAGESIZE	65536
+
+#ifndef NOGROUP
+# define NOGROUP	(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#ifdef __KERNEL__
+# include <linux/config.h>	/* mustn't include <linux/config.h> outside of #ifdef __KERNEL__ */
+# ifdef CONFIG_IA64_HP_SIM
+  /*
+   * Yeah, simulating stuff is slow, so let us catch some breath between
+   * timer interrupts...
+   */
+#  define HZ	  32
+# else
+#  define HZ	1024
+# endif
+# define USER_HZ	HZ
+# define CLOCKS_PER_SEC	HZ	/* frequency at which times() counts */
+#else
+   /*
+    * Technically, this is wrong, but some old apps still refer to it.  The proper way to
+    * get the HZ value is via sysconf(_SC_CLK_TCK).
+    */
+# define HZ 1024
+#endif
+
+#endif /* _ASM_IA64_PARAM_H */
diff --git a/include/asm-ia64/parport.h b/include/asm-ia64/parport.h
new file mode 100644
index 000000000000..67e16adfcd25
--- /dev/null
+++ b/include/asm-ia64/parport.h
@@ -0,0 +1,20 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_IA64_PARPORT_H
+#define _ASM_IA64_PARPORT_H 1
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+
+static int __devinit
+parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports(autoirq, autodma);
+}
+
+#endif /* _ASM_IA64_PARPORT_H */
diff --git a/include/asm-ia64/patch.h b/include/asm-ia64/patch.h
new file mode 100644
index 000000000000..4797f3535e6d
--- /dev/null
+++ b/include/asm-ia64/patch.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_IA64_PATCH_H
+#define _ASM_IA64_PATCH_H
+
+/*
+ * Copyright (C) 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * There are a number of reasons for patching instructions.  Rather than duplicating code
+ * all over the place, we put the common stuff here.  Reasons for patching: in-kernel
+ * module-loader, virtual-to-physical patch-list, McKinley Errata 9 workaround, and gate
+ * shared library.  Undoubtedly, some of these reasons will disappear and others will
+ * be added over time.
+ */
+#include <linux/elf.h>
+#include <linux/types.h>
+
+extern void ia64_patch (u64 insn_addr, u64 mask, u64 val);	/* patch any insn slot */
+extern void ia64_patch_imm64 (u64 insn_addr, u64 val);		/* patch "movl" w/abs. value*/
+extern void ia64_patch_imm60 (u64 insn_addr, u64 val);		/* patch "brl" w/ip-rel value */
+
+extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end);
+extern void ia64_patch_vtop (unsigned long start, unsigned long end);
+extern void ia64_patch_gate (void);
+
+#endif /* _ASM_IA64_PATCH_H */
diff --git a/include/asm-ia64/pci.h b/include/asm-ia64/pci.h
new file mode 100644
index 000000000000..a8314ee4e7d2
--- /dev/null
+++ b/include/asm-ia64/pci.h
@@ -0,0 +1,141 @@
+#ifndef _ASM_IA64_PCI_H
+#define _ASM_IA64_PCI_H
+
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/scatterlist.h>
+
+/*
+ * Can be used to override the logic in pci_scan_bus for skipping already-configured bus
+ * numbers - to be used for buggy BIOSes or architectures with incomplete PCI setup by the
+ * loader.
+ */
+#define pcibios_assign_all_busses()     0
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+void pcibios_config_init(void);
+
+struct pci_dev;
+
+/*
+ * PCI_DMA_BUS_IS_PHYS should be set to 1 if there is _necessarily_ a direct correspondence
+ * between device bus addresses and CPU physical addresses.  Platforms with a hardware I/O
+ * MMU _must_ turn this off to suppress the bounce buffer handling code in the block and
+ * network device layers.  Platforms with separate bus address spaces _must_ turn this off
+ * and provide a device DMA mapping implementation that takes care of the necessary
+ * address translation.
+ *
+ * For now, the ia64 platforms which may have separate/multiple bus address spaces all
+ * have I/O MMUs which support the merging of physically discontiguous buffers, so we can
+ * use that as the sole factor to determine the setting of PCI_DMA_BUS_IS_PHYS.
+ */
+extern unsigned long ia64_max_iommu_merge_mask;
+#define PCI_DMA_BUS_IS_PHYS	(ia64_max_iommu_merge_mask == ~0UL)
+
+static inline void
+pcibios_set_master (struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void
+pcibios_penalize_isa_irq (int irq)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#define HAVE_ARCH_PCI_MWI 1
+extern int pcibios_prep_mwi (struct pci_dev *);
+
+#include <asm-generic/pci-dma-compat.h>
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+/* The ia64 platform always supports 64-bit addressing. */
+#define pci_dac_dma_supported(pci_dev, mask)		(1)
+#define pci_dac_page_to_dma(dev,pg,off,dir)		((dma_addr_t) page_to_bus(pg) + (off))
+#define pci_dac_dma_to_page(dev,dma_addr)		(virt_to_page(bus_to_virt(dma_addr)))
+#define pci_dac_dma_to_offset(dev,dma_addr)		offset_in_page(dma_addr)
+#define pci_dac_dma_sync_single_for_cpu(dev,dma_addr,len,dir)	do { } while (0)
+#define pci_dac_dma_sync_single_for_device(dev,dma_addr,len,dir)	do { mb(); } while (0)
+
+#define sg_dma_len(sg)		((sg)->dma_length)
+#define sg_dma_address(sg)	((sg)->dma_address)
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
+				enum pci_mmap_state mmap_state, int write_combine);
+#define HAVE_PCI_LEGACY
+extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
+				      struct vm_area_struct *vma);
+extern ssize_t pci_read_legacy_io(struct kobject *kobj, char *buf, loff_t off,
+				  size_t count);
+extern ssize_t pci_write_legacy_io(struct kobject *kobj, char *buf, loff_t off,
+				   size_t count);
+extern int pci_mmap_legacy_mem(struct kobject *kobj,
+			       struct bin_attribute *attr,
+			       struct vm_area_struct *vma);
+
+#define pci_get_legacy_mem platform_pci_get_legacy_mem
+#define pci_legacy_read platform_pci_legacy_read
+#define pci_legacy_write platform_pci_legacy_write
+
+struct pci_window {
+	struct resource resource;
+	u64 offset;
+};
+
+struct pci_controller {
+	void *acpi_handle;
+	void *iommu;
+	int segment;
+
+	unsigned int windows;
+	struct pci_window *window;
+
+	void *platform_data;
+};
+
+#define PCI_CONTROLLER(busdev) ((struct pci_controller *) busdev->sysdata)
+#define pci_domain_nr(busdev)    (PCI_CONTROLLER(busdev)->segment)
+
+extern struct pci_ops pci_root_ops;
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return (pci_domain_nr(bus) != 0);
+}
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+		struct pci_bus_region *region, struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+		struct resource *res, struct pci_bus_region *region);
+
+#define pcibios_scan_all_fns(a, b)	0
+
+#endif /* _ASM_IA64_PCI_H */
diff --git a/include/asm-ia64/percpu.h b/include/asm-ia64/percpu.h
new file mode 100644
index 000000000000..1e87f19dad56
--- /dev/null
+++ b/include/asm-ia64/percpu.h
@@ -0,0 +1,72 @@
+#ifndef _ASM_IA64_PERCPU_H
+#define _ASM_IA64_PERCPU_H
+
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#define PERCPU_ENOUGH_ROOM PERCPU_PAGE_SIZE
+
+#ifdef __ASSEMBLY__
+# define THIS_CPU(var)	(per_cpu__##var)  /* use this to mark accesses to per-CPU variables... */
+#else /* !__ASSEMBLY__ */
+
+#include <linux/config.h>
+
+#include <linux/threads.h>
+
+#ifdef HAVE_MODEL_SMALL_ATTRIBUTE
+# define __SMALL_ADDR_AREA	__attribute__((__model__ (__small__)))
+#else
+# define __SMALL_ADDR_AREA
+#endif
+
+#define DECLARE_PER_CPU(type, name)				\
+	extern __SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
+
+/* Separate out the type, so (int[3], foo) works. */
+#define DEFINE_PER_CPU(type, name)				\
+	__attribute__((__section__(".data.percpu")))		\
+	__SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
+
+/*
+ * Pretty much a literal copy of asm-generic/percpu.h, except that percpu_modcopy() is an
+ * external routine, to avoid include-hell.
+ */
+#ifdef CONFIG_SMP
+
+extern unsigned long __per_cpu_offset[NR_CPUS];
+
+/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
+DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
+
+#define per_cpu(var, cpu)  (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]))
+#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __ia64_per_cpu_var(local_per_cpu_offset)))
+
+extern void percpu_modcopy(void *pcpudst, const void *src, unsigned long size);
+extern void setup_per_cpu_areas (void);
+extern void *per_cpu_init(void);
+
+#else /* ! SMP */
+
+#define per_cpu(var, cpu)			(*((void)cpu, &per_cpu__##var))
+#define __get_cpu_var(var)			per_cpu__##var
+#define per_cpu_init()				(__phys_per_cpu_start)
+
+#endif	/* SMP */
+
+#define EXPORT_PER_CPU_SYMBOL(var)		EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var)		EXPORT_SYMBOL_GPL(per_cpu__##var)
+
+/*
+ * Be extremely careful when taking the address of this variable!  Due to virtual
+ * remapping, it is different from the canonical address returned by __get_cpu_var(var)!
+ * On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly
+ * more efficient.
+ */
+#define __ia64_per_cpu_var(var)	(per_cpu__##var)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PERCPU_H */
diff --git a/include/asm-ia64/perfmon.h b/include/asm-ia64/perfmon.h
new file mode 100644
index 000000000000..136c60e6bfcc
--- /dev/null
+++ b/include/asm-ia64/perfmon.h
@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) 2001-2003 Hewlett-Packard Co
+ *               Stephane Eranian <eranian@hpl.hp.com>
+ */
+
+#ifndef _ASM_IA64_PERFMON_H
+#define _ASM_IA64_PERFMON_H
+
+/*
+ * perfmon comamnds supported on all CPU models
+ */
+#define PFM_WRITE_PMCS		0x01
+#define PFM_WRITE_PMDS		0x02
+#define PFM_READ_PMDS		0x03
+#define PFM_STOP		0x04
+#define PFM_START		0x05
+#define PFM_ENABLE		0x06 /* obsolete */
+#define PFM_DISABLE		0x07 /* obsolete */
+#define PFM_CREATE_CONTEXT	0x08
+#define PFM_DESTROY_CONTEXT	0x09 /* obsolete use close() */
+#define PFM_RESTART		0x0a
+#define PFM_PROTECT_CONTEXT	0x0b /* obsolete */
+#define PFM_GET_FEATURES	0x0c
+#define PFM_DEBUG		0x0d
+#define PFM_UNPROTECT_CONTEXT	0x0e /* obsolete */
+#define PFM_GET_PMC_RESET_VAL	0x0f
+#define PFM_LOAD_CONTEXT	0x10
+#define PFM_UNLOAD_CONTEXT	0x11
+
+/*
+ * PMU model specific commands (may not be supported on all PMU models)
+ */
+#define PFM_WRITE_IBRS		0x20
+#define PFM_WRITE_DBRS		0x21
+
+/*
+ * context flags
+ */
+#define PFM_FL_NOTIFY_BLOCK    	 0x01	/* block task on user level notifications */
+#define PFM_FL_SYSTEM_WIDE	 0x02	/* create a system wide context */
+#define PFM_FL_OVFL_NO_MSG	 0x80   /* do not post overflow/end messages for notification */
+
+/*
+ * event set flags
+ */
+#define PFM_SETFL_EXCL_IDLE      0x01   /* exclude idle task (syswide only) XXX: DO NOT USE YET */
+
+/*
+ * PMC flags
+ */
+#define PFM_REGFL_OVFL_NOTIFY	0x1	/* send notification on overflow */
+#define PFM_REGFL_RANDOM	0x2	/* randomize sampling interval   */
+
+/*
+ * PMD/PMC/IBR/DBR return flags (ignored on input)
+ *
+ * Those flags are used on output and must be checked in case EAGAIN is returned
+ * by any of the calls using a pfarg_reg_t or pfarg_dbreg_t structure.
+ */
+#define PFM_REG_RETFL_NOTAVAIL	(1UL<<31) /* set if register is implemented but not available */
+#define PFM_REG_RETFL_EINVAL	(1UL<<30) /* set if register entry is invalid */
+#define PFM_REG_RETFL_MASK	(PFM_REG_RETFL_NOTAVAIL|PFM_REG_RETFL_EINVAL)
+
+#define PFM_REG_HAS_ERROR(flag)	(((flag) & PFM_REG_RETFL_MASK) != 0)
+
+typedef unsigned char pfm_uuid_t[16];	/* custom sampling buffer identifier type */
+
+/*
+ * Request structure used to define a context
+ */
+typedef struct {
+	pfm_uuid_t     ctx_smpl_buf_id;	 /* which buffer format to use (if needed) */
+	unsigned long  ctx_flags;	 /* noblock/block */
+	unsigned short ctx_nextra_sets;	 /* number of extra event sets (you always get 1) */
+	unsigned short ctx_reserved1;	 /* for future use */
+	int	       ctx_fd;		 /* return arg: unique identification for context */
+	void	       *ctx_smpl_vaddr;	 /* return arg: virtual address of sampling buffer, is used */
+	unsigned long  ctx_reserved2[11];/* for future use */
+} pfarg_context_t;
+
+/*
+ * Request structure used to write/read a PMC or PMD
+ */
+typedef struct {
+	unsigned int	reg_num;	   /* which register */
+	unsigned short	reg_set;	   /* event set for this register */
+	unsigned short	reg_reserved1;	   /* for future use */
+
+	unsigned long	reg_value;	   /* initial pmc/pmd value */
+	unsigned long	reg_flags;	   /* input: pmc/pmd flags, return: reg error */
+
+	unsigned long	reg_long_reset;	   /* reset after buffer overflow notification */
+	unsigned long	reg_short_reset;   /* reset after counter overflow */
+
+	unsigned long	reg_reset_pmds[4]; /* which other counters to reset on overflow */
+	unsigned long	reg_random_seed;   /* seed value when randomization is used */
+	unsigned long	reg_random_mask;   /* bitmask used to limit random value */
+	unsigned long   reg_last_reset_val;/* return: PMD last reset value */
+
+	unsigned long	reg_smpl_pmds[4];  /* which pmds are accessed when PMC overflows */
+	unsigned long	reg_smpl_eventid;  /* opaque sampling event identifier */
+
+	unsigned long   reg_reserved2[3];   /* for future use */
+} pfarg_reg_t;
+
+typedef struct {
+	unsigned int	dbreg_num;		/* which debug register */
+	unsigned short	dbreg_set;		/* event set for this register */
+	unsigned short	dbreg_reserved1;	/* for future use */
+	unsigned long	dbreg_value;		/* value for debug register */
+	unsigned long	dbreg_flags;		/* return: dbreg error */
+	unsigned long	dbreg_reserved2[1];	/* for future use */
+} pfarg_dbreg_t;
+
+typedef struct {
+	unsigned int	ft_version;	/* perfmon: major [16-31], minor [0-15] */
+	unsigned int	ft_reserved;	/* reserved for future use */
+	unsigned long	reserved[4];	/* for future use */
+} pfarg_features_t;
+
+typedef struct {
+	pid_t		load_pid;	   /* process to load the context into */
+	unsigned short	load_set;	   /* first event set to load */
+	unsigned short	load_reserved1;	   /* for future use */
+	unsigned long	load_reserved2[3]; /* for future use */
+} pfarg_load_t;
+
+typedef struct {
+	int		msg_type;		/* generic message header */
+	int		msg_ctx_fd;		/* generic message header */
+	unsigned long	msg_ovfl_pmds[4];	/* which PMDs overflowed */
+	unsigned short  msg_active_set;		/* active set at the time of overflow */
+	unsigned short  msg_reserved1;		/* for future use */
+	unsigned int    msg_reserved2;		/* for future use */
+	unsigned long	msg_tstamp;		/* for perf tuning/debug */
+} pfm_ovfl_msg_t;
+
+typedef struct {
+	int		msg_type;		/* generic message header */
+	int		msg_ctx_fd;		/* generic message header */
+	unsigned long	msg_tstamp;		/* for perf tuning */
+} pfm_end_msg_t;
+
+typedef struct {
+	int		msg_type;		/* type of the message */
+	int		msg_ctx_fd;		/* unique identifier for the context */
+	unsigned long	msg_tstamp;		/* for perf tuning */
+} pfm_gen_msg_t;
+
+#define PFM_MSG_OVFL	1	/* an overflow happened */
+#define PFM_MSG_END	2	/* task to which context was attached ended */
+
+typedef union {
+	pfm_ovfl_msg_t	pfm_ovfl_msg;
+	pfm_end_msg_t	pfm_end_msg;
+	pfm_gen_msg_t	pfm_gen_msg;
+} pfm_msg_t;
+
+/*
+ * Define the version numbers for both perfmon as a whole and the sampling buffer format.
+ */
+#define PFM_VERSION_MAJ		 2U
+#define PFM_VERSION_MIN		 0U
+#define PFM_VERSION		 (((PFM_VERSION_MAJ&0xffff)<<16)|(PFM_VERSION_MIN & 0xffff))
+#define PFM_VERSION_MAJOR(x)	 (((x)>>16) & 0xffff)
+#define PFM_VERSION_MINOR(x)	 ((x) & 0xffff)
+
+
+/*
+ * miscellaneous architected definitions
+ */
+#define PMU_FIRST_COUNTER	4	/* first counting monitor (PMC/PMD) */
+#define PMU_MAX_PMCS		256	/* maximum architected number of PMC registers */
+#define PMU_MAX_PMDS		256	/* maximum architected number of PMD registers */
+
+#ifdef __KERNEL__
+
+extern long perfmonctl(int fd, int cmd, void *arg, int narg);
+
+extern void pfm_save_regs (struct task_struct *);
+extern void pfm_load_regs (struct task_struct *);
+
+extern void pfm_exit_thread(struct task_struct *);
+extern int  pfm_use_debug_registers(struct task_struct *);
+extern int  pfm_release_debug_registers(struct task_struct *);
+extern void pfm_syst_wide_update_task(struct task_struct *, unsigned long info, int is_ctxswin);
+extern void pfm_inherit(struct task_struct *task, struct pt_regs *regs);
+extern void pfm_init_percpu(void);
+extern void pfm_handle_work(void);
+
+/*
+ * Reset PMD register flags
+ */
+#define PFM_PMD_SHORT_RESET	0
+#define PFM_PMD_LONG_RESET	1
+
+typedef union {
+	unsigned int val;
+	struct {
+		unsigned int notify_user:1;	/* notify user program of overflow */
+		unsigned int reset_ovfl_pmds:1;	/* reset overflowed PMDs */
+		unsigned int block_task:1;	/* block monitored task on kernel exit */
+		unsigned int mask_monitoring:1; /* mask monitors via PMCx.plm */
+		unsigned int reserved:28;	/* for future use */
+	} bits;
+} pfm_ovfl_ctrl_t;
+
+typedef struct {
+	unsigned char	ovfl_pmd;			/* index of overflowed PMD  */
+	unsigned char   ovfl_notify;			/* =1 if monitor requested overflow notification */
+	unsigned short  active_set;			/* event set active at the time of the overflow */
+	pfm_ovfl_ctrl_t ovfl_ctrl;			/* return: perfmon controls to set by handler */
+
+	unsigned long   pmd_last_reset;			/* last reset value of of the PMD */
+	unsigned long	smpl_pmds[4];			/* bitmask of other PMD of interest on overflow */
+	unsigned long   smpl_pmds_values[PMU_MAX_PMDS]; /* values for the other PMDs of interest */
+	unsigned long   pmd_value;			/* current 64-bit value of the PMD */
+	unsigned long	pmd_eventid;			/* eventid associated with PMD */
+} pfm_ovfl_arg_t;
+
+
+typedef struct {
+	char		*fmt_name;
+	pfm_uuid_t	fmt_uuid;
+	size_t		fmt_arg_size;
+	unsigned long	fmt_flags;
+
+	int		(*fmt_validate)(struct task_struct *task, unsigned int flags, int cpu, void *arg);
+	int		(*fmt_getsize)(struct task_struct *task, unsigned int flags, int cpu, void *arg, unsigned long *size);
+	int 		(*fmt_init)(struct task_struct *task, void *buf, unsigned int flags, int cpu, void *arg);
+	int		(*fmt_handler)(struct task_struct *task, void *buf, pfm_ovfl_arg_t *arg, struct pt_regs *regs, unsigned long stamp);
+	int		(*fmt_restart)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
+	int		(*fmt_restart_active)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
+	int		(*fmt_exit)(struct task_struct *task, void *buf, struct pt_regs *regs);
+
+	struct list_head fmt_list;
+} pfm_buffer_fmt_t;
+
+extern int pfm_register_buffer_fmt(pfm_buffer_fmt_t *fmt);
+extern int pfm_unregister_buffer_fmt(pfm_uuid_t uuid);
+
+/*
+ * perfmon interface exported to modules
+ */
+extern int pfm_mod_read_pmds(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_pmcs(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_ibrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_dbrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
+
+/*
+ * describe the content of the local_cpu_date->pfm_syst_info field
+ */
+#define PFM_CPUINFO_SYST_WIDE	0x1	/* if set a system wide session exists */
+#define PFM_CPUINFO_DCR_PP	0x2	/* if set the system wide session has started */
+#define PFM_CPUINFO_EXCL_IDLE	0x4	/* the system wide session excludes the idle task */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_PERFMON_H */
diff --git a/include/asm-ia64/perfmon_default_smpl.h b/include/asm-ia64/perfmon_default_smpl.h
new file mode 100644
index 000000000000..48822c0811d8
--- /dev/null
+++ b/include/asm-ia64/perfmon_default_smpl.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *               Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * This file implements the default sampling buffer format
+ * for Linux/ia64 perfmon subsystem.
+ */
+#ifndef __PERFMON_DEFAULT_SMPL_H__
+#define __PERFMON_DEFAULT_SMPL_H__ 1
+
+#define PFM_DEFAULT_SMPL_UUID { \
+		0x4d, 0x72, 0xbe, 0xc0, 0x06, 0x64, 0x41, 0x43, 0x82, 0xb4, 0xd3, 0xfd, 0x27, 0x24, 0x3c, 0x97}
+
+/*
+ * format specific parameters (passed at context creation)
+ */
+typedef struct {
+	unsigned long buf_size;		/* size of the buffer in bytes */
+	unsigned int  flags;		/* buffer specific flags */
+	unsigned int  res1;		/* for future use */
+	unsigned long reserved[2];	/* for future use */
+} pfm_default_smpl_arg_t;
+
+/*
+ * combined context+format specific structure. Can be passed
+ * to PFM_CONTEXT_CREATE
+ */
+typedef struct {
+	pfarg_context_t		ctx_arg;
+	pfm_default_smpl_arg_t	buf_arg;
+} pfm_default_smpl_ctx_arg_t;
+
+/*
+ * This header is at the beginning of the sampling buffer returned to the user.
+ * It is directly followed by the first record.
+ */
+typedef struct {
+	unsigned long	hdr_count;		/* how many valid entries */
+	unsigned long	hdr_cur_offs;		/* current offset from top of buffer */
+	unsigned long	hdr_reserved2;		/* reserved for future use */
+
+	unsigned long	hdr_overflows;		/* how many times the buffer overflowed */
+	unsigned long   hdr_buf_size;		/* how many bytes in the buffer */
+
+	unsigned int	hdr_version;		/* contains perfmon version (smpl format diffs) */
+	unsigned int	hdr_reserved1;		/* for future use */
+	unsigned long	hdr_reserved[10];	/* for future use */
+} pfm_default_smpl_hdr_t;
+
+/*
+ * Entry header in the sampling buffer.  The header is directly followed
+ * with the values of the PMD registers of interest saved in increasing 
+ * index order: PMD4, PMD5, and so on. How many PMDs are present depends 
+ * on how the session was programmed.
+ *
+ * In the case where multiple counters overflow at the same time, multiple
+ * entries are written consecutively.
+ *
+ * last_reset_value member indicates the initial value of the overflowed PMD. 
+ */
+typedef struct {
+        int             pid;                    /* thread id (for NPTL, this is gettid()) */
+        unsigned char   reserved1[3];           /* reserved for future use */
+        unsigned char   ovfl_pmd;               /* index of overflowed PMD */
+
+        unsigned long   last_reset_val;         /* initial value of overflowed PMD */
+        unsigned long   ip;                     /* where did the overflow interrupt happened  */
+        unsigned long   tstamp;                 /* ar.itc when entering perfmon intr. handler */
+
+        unsigned short  cpu;                    /* cpu on which the overfow occured */
+        unsigned short  set;                    /* event set active when overflow ocurred   */
+        int    		tgid;              	/* thread group id (for NPTL, this is getpid()) */
+} pfm_default_smpl_entry_t;
+
+#define PFM_DEFAULT_MAX_PMDS		64 /* how many pmds supported by data structures (sizeof(unsigned long) */
+#define PFM_DEFAULT_MAX_ENTRY_SIZE	(sizeof(pfm_default_smpl_entry_t)+(sizeof(unsigned long)*PFM_DEFAULT_MAX_PMDS))
+#define PFM_DEFAULT_SMPL_MIN_BUF_SIZE	(sizeof(pfm_default_smpl_hdr_t)+PFM_DEFAULT_MAX_ENTRY_SIZE)
+
+#define PFM_DEFAULT_SMPL_VERSION_MAJ	2U
+#define PFM_DEFAULT_SMPL_VERSION_MIN	0U
+#define PFM_DEFAULT_SMPL_VERSION	(((PFM_DEFAULT_SMPL_VERSION_MAJ&0xffff)<<16)|(PFM_DEFAULT_SMPL_VERSION_MIN & 0xffff))
+
+#endif /* __PERFMON_DEFAULT_SMPL_H__ */
diff --git a/include/asm-ia64/pgalloc.h b/include/asm-ia64/pgalloc.h
new file mode 100644
index 000000000000..0f05dc8bd460
--- /dev/null
+++ b/include/asm-ia64/pgalloc.h
@@ -0,0 +1,167 @@
+#ifndef _ASM_IA64_PGALLOC_H
+#define _ASM_IA64_PGALLOC_H
+
+/*
+ * This file contains the functions and defines necessary to allocate
+ * page tables.
+ *
+ * This hopefully works with any (fixed) ia-64 page-size, as defined
+ * in <asm/page.h> (currently 8192).
+ *
+ * Copyright (C) 1998-2001 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2000, Goutham Rao <goutham.rao@intel.com>
+ */
+
+#include <linux/config.h>
+
+#include <linux/compiler.h>
+#include <linux/mm.h>
+#include <linux/page-flags.h>
+#include <linux/threads.h>
+
+#include <asm/mmu_context.h>
+
+/*
+ * Very stupidly, we used to get new pgd's and pmd's, init their contents
+ * to point to the NULL versions of the next level page table, later on
+ * completely re-init them the same way, then free them up.  This wasted
+ * a lot of work and caused unnecessary memory traffic.  How broken...
+ * We fix this by caching them.
+ */
+#define pgd_quicklist		(local_cpu_data->pgd_quick)
+#define pmd_quicklist		(local_cpu_data->pmd_quick)
+#define pgtable_cache_size	(local_cpu_data->pgtable_cache_sz)
+
+static inline pgd_t*
+pgd_alloc_one_fast (struct mm_struct *mm)
+{
+	unsigned long *ret = NULL;
+
+	preempt_disable();
+
+	ret = pgd_quicklist;
+	if (likely(ret != NULL)) {
+		pgd_quicklist = (unsigned long *)(*ret);
+		ret[0] = 0;
+		--pgtable_cache_size;
+	} else
+		ret = NULL;
+
+	preempt_enable();
+
+	return (pgd_t *) ret;
+}
+
+static inline pgd_t*
+pgd_alloc (struct mm_struct *mm)
+{
+	/* the VM system never calls pgd_alloc_one_fast(), so we do it here. */
+	pgd_t *pgd = pgd_alloc_one_fast(mm);
+
+	if (unlikely(pgd == NULL)) {
+		pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO);
+	}
+	return pgd;
+}
+
+static inline void
+pgd_free (pgd_t *pgd)
+{
+	preempt_disable();
+	*(unsigned long *)pgd = (unsigned long) pgd_quicklist;
+	pgd_quicklist = (unsigned long *) pgd;
+	++pgtable_cache_size;
+	preempt_enable();
+}
+
+static inline void
+pud_populate (struct mm_struct *mm, pud_t *pud_entry, pmd_t *pmd)
+{
+	pud_val(*pud_entry) = __pa(pmd);
+}
+
+static inline pmd_t*
+pmd_alloc_one_fast (struct mm_struct *mm, unsigned long addr)
+{
+	unsigned long *ret = NULL;
+
+	preempt_disable();
+
+	ret = (unsigned long *)pmd_quicklist;
+	if (likely(ret != NULL)) {
+		pmd_quicklist = (unsigned long *)(*ret);
+		ret[0] = 0;
+		--pgtable_cache_size;
+	}
+
+	preempt_enable();
+
+	return (pmd_t *)ret;
+}
+
+static inline pmd_t*
+pmd_alloc_one (struct mm_struct *mm, unsigned long addr)
+{
+	pmd_t *pmd = (pmd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+
+	return pmd;
+}
+
+static inline void
+pmd_free (pmd_t *pmd)
+{
+	preempt_disable();
+	*(unsigned long *)pmd = (unsigned long) pmd_quicklist;
+	pmd_quicklist = (unsigned long *) pmd;
+	++pgtable_cache_size;
+	preempt_enable();
+}
+
+#define __pmd_free_tlb(tlb, pmd)	pmd_free(pmd)
+
+static inline void
+pmd_populate (struct mm_struct *mm, pmd_t *pmd_entry, struct page *pte)
+{
+	pmd_val(*pmd_entry) = page_to_phys(pte);
+}
+
+static inline void
+pmd_populate_kernel (struct mm_struct *mm, pmd_t *pmd_entry, pte_t *pte)
+{
+	pmd_val(*pmd_entry) = __pa(pte);
+}
+
+static inline struct page *
+pte_alloc_one (struct mm_struct *mm, unsigned long addr)
+{
+	struct page *pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+
+	return pte;
+}
+
+static inline pte_t *
+pte_alloc_one_kernel (struct mm_struct *mm, unsigned long addr)
+{
+	pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+
+	return pte;
+}
+
+static inline void
+pte_free (struct page *pte)
+{
+	__free_page(pte);
+}
+
+static inline void
+pte_free_kernel (pte_t *pte)
+{
+	free_page((unsigned long) pte);
+}
+
+#define __pte_free_tlb(tlb, pte)	tlb_remove_page((tlb), (pte))
+
+extern void check_pgt_cache (void);
+
+#endif /* _ASM_IA64_PGALLOC_H */
diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h
new file mode 100644
index 000000000000..1757a811f436
--- /dev/null
+++ b/include/asm-ia64/pgtable.h
@@ -0,0 +1,593 @@
+#ifndef _ASM_IA64_PGTABLE_H
+#define _ASM_IA64_PGTABLE_H
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the IA-64 page table tree.
+ *
+ * This hopefully works with any (fixed) IA-64 page-size, as defined
+ * in <asm/page.h>.
+ *
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <asm/mman.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/types.h>
+
+#define IA64_MAX_PHYS_BITS	50	/* max. number of physical address bits (architected) */
+
+/*
+ * First, define the various bits in a PTE.  Note that the PTE format
+ * matches the VHPT short format, the firt doubleword of the VHPD long
+ * format, and the first doubleword of the TLB insertion format.
+ */
+#define _PAGE_P_BIT		0
+#define _PAGE_A_BIT		5
+#define _PAGE_D_BIT		6
+
+#define _PAGE_P			(1 << _PAGE_P_BIT)	/* page present bit */
+#define _PAGE_MA_WB		(0x0 <<  2)	/* write back memory attribute */
+#define _PAGE_MA_UC		(0x4 <<  2)	/* uncacheable memory attribute */
+#define _PAGE_MA_UCE		(0x5 <<  2)	/* UC exported attribute */
+#define _PAGE_MA_WC		(0x6 <<  2)	/* write coalescing memory attribute */
+#define _PAGE_MA_NAT		(0x7 <<  2)	/* not-a-thing attribute */
+#define _PAGE_MA_MASK		(0x7 <<  2)
+#define _PAGE_PL_0		(0 <<  7)	/* privilege level 0 (kernel) */
+#define _PAGE_PL_1		(1 <<  7)	/* privilege level 1 (unused) */
+#define _PAGE_PL_2		(2 <<  7)	/* privilege level 2 (unused) */
+#define _PAGE_PL_3		(3 <<  7)	/* privilege level 3 (user) */
+#define _PAGE_PL_MASK		(3 <<  7)
+#define _PAGE_AR_R		(0 <<  9)	/* read only */
+#define _PAGE_AR_RX		(1 <<  9)	/* read & execute */
+#define _PAGE_AR_RW		(2 <<  9)	/* read & write */
+#define _PAGE_AR_RWX		(3 <<  9)	/* read, write & execute */
+#define _PAGE_AR_R_RW		(4 <<  9)	/* read / read & write */
+#define _PAGE_AR_RX_RWX		(5 <<  9)	/* read & exec / read, write & exec */
+#define _PAGE_AR_RWX_RW		(6 <<  9)	/* read, write & exec / read & write */
+#define _PAGE_AR_X_RX		(7 <<  9)	/* exec & promote / read & exec */
+#define _PAGE_AR_MASK		(7 <<  9)
+#define _PAGE_AR_SHIFT		9
+#define _PAGE_A			(1 << _PAGE_A_BIT)	/* page accessed bit */
+#define _PAGE_D			(1 << _PAGE_D_BIT)	/* page dirty bit */
+#define _PAGE_PPN_MASK		(((__IA64_UL(1) << IA64_MAX_PHYS_BITS) - 1) & ~0xfffUL)
+#define _PAGE_ED		(__IA64_UL(1) << 52)	/* exception deferral */
+#define _PAGE_PROTNONE		(__IA64_UL(1) << 63)
+
+/* Valid only for a PTE with the present bit cleared: */
+#define _PAGE_FILE		(1 << 1)		/* see swap & file pte remarks below */
+
+#define _PFN_MASK		_PAGE_PPN_MASK
+/* Mask of bits which may be changed by pte_modify(); the odd bits are there for _PAGE_PROTNONE */
+#define _PAGE_CHG_MASK	(_PAGE_P | _PAGE_PROTNONE | _PAGE_PL_MASK | _PAGE_AR_MASK | _PAGE_ED)
+
+#define _PAGE_SIZE_4K	12
+#define _PAGE_SIZE_8K	13
+#define _PAGE_SIZE_16K	14
+#define _PAGE_SIZE_64K	16
+#define _PAGE_SIZE_256K	18
+#define _PAGE_SIZE_1M	20
+#define _PAGE_SIZE_4M	22
+#define _PAGE_SIZE_16M	24
+#define _PAGE_SIZE_64M	26
+#define _PAGE_SIZE_256M	28
+#define _PAGE_SIZE_1G	30
+#define _PAGE_SIZE_4G	32
+
+#define __ACCESS_BITS		_PAGE_ED | _PAGE_A | _PAGE_P | _PAGE_MA_WB
+#define __DIRTY_BITS_NO_ED	_PAGE_A | _PAGE_P | _PAGE_D | _PAGE_MA_WB
+#define __DIRTY_BITS		_PAGE_ED | __DIRTY_BITS_NO_ED
+
+/*
+ * Definitions for first level:
+ *
+ * PGDIR_SHIFT determines what a first-level page table entry can map.
+ */
+#define PGDIR_SHIFT		(PAGE_SHIFT + 2*(PAGE_SHIFT-3))
+#define PGDIR_SIZE		(__IA64_UL(1) << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+#define PTRS_PER_PGD		(1UL << (PAGE_SHIFT-3))
+#define USER_PTRS_PER_PGD	(5*PTRS_PER_PGD/8)	/* regions 0-4 are user regions */
+#define FIRST_USER_PGD_NR	0
+
+/*
+ * Definitions for second level:
+ *
+ * PMD_SHIFT determines the size of the area a second-level page table
+ * can map.
+ */
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3))
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#define PTRS_PER_PMD	(1UL << (PAGE_SHIFT-3))
+
+/*
+ * Definitions for third level:
+ */
+#define PTRS_PER_PTE	(__IA64_UL(1) << (PAGE_SHIFT-3))
+
+/*
+ * All the normal masks have the "page accessed" bits on, as any time
+ * they are used, the page is accessed. They are cleared only by the
+ * page-out routines.
+ */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_A)
+#define PAGE_SHARED	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RW)
+#define PAGE_READONLY	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R)
+#define PAGE_COPY	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R)
+#define PAGE_COPY_EXEC	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define PAGE_GATE	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_X_RX)
+#define PAGE_KERNEL	__pgprot(__DIRTY_BITS  | _PAGE_PL_0 | _PAGE_AR_RWX)
+#define PAGE_KERNELRX	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_RX)
+
+# ifndef __ASSEMBLY__
+
+#include <asm/bitops.h>
+#include <asm/cacheflush.h>
+#include <asm/mmu_context.h>
+#include <asm/processor.h>
+
+/*
+ * Next come the mappings that determine how mmap() protection bits
+ * (PROT_EXEC, PROT_READ, PROT_WRITE, PROT_NONE) get implemented.  The
+ * _P version gets used for a private shared memory segment, the _S
+ * version gets used for a shared memory segment with MAP_SHARED on.
+ * In a private shared memory segment, we do a copy-on-write if a task
+ * attempts to write to the page.
+ */
+	/* xwr */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_READONLY	/* write to priv pg -> copy & make writable */
+#define __P011	PAGE_READONLY	/* ditto */
+#define __P100	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX)
+#define __P101	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define __P110	PAGE_COPY_EXEC
+#define __P111	PAGE_COPY_EXEC
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED	/* we don't have (and don't need) write-only */
+#define __S011	PAGE_SHARED
+#define __S100	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX)
+#define __S101	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define __S110	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX)
+#define __S111	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX)
+
+#define pgd_ERROR(e)	printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
+#define pmd_ERROR(e)	printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pte_ERROR(e)	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+
+
+/*
+ * Some definitions to translate between mem_map, PTEs, and page addresses:
+ */
+
+
+/* Quick test to see if ADDR is a (potentially) valid physical address. */
+static inline long
+ia64_phys_addr_valid (unsigned long addr)
+{
+	return (addr & (local_cpu_data->unimpl_pa_mask)) == 0;
+}
+
+/*
+ * kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel
+ * memory.  For the return value to be meaningful, ADDR must be >=
+ * PAGE_OFFSET.  This operation can be relatively expensive (e.g.,
+ * require a hash-, or multi-level tree-lookup or something of that
+ * sort) but it guarantees to return TRUE only if accessing the page
+ * at that address does not cause an error.  Note that there may be
+ * addresses for which kern_addr_valid() returns FALSE even though an
+ * access would not cause an error (e.g., this is typically true for
+ * memory mapped I/O regions.
+ *
+ * XXX Need to implement this for IA-64.
+ */
+#define kern_addr_valid(addr)	(1)
+
+
+/*
+ * Now come the defines and routines to manage and access the three-level
+ * page table.
+ */
+
+/*
+ * On some architectures, special things need to be done when setting
+ * the PTE in a page table.  Nothing special needs to be on IA-64.
+ */
+#define set_pte(ptep, pteval)	(*(ptep) = (pteval))
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+#define RGN_SIZE	(1UL << 61)
+#define RGN_KERNEL	7
+
+#define VMALLOC_START		0xa000000200000000UL
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+# define VMALLOC_END_INIT	(0xa000000000000000UL + (1UL << (4*PAGE_SHIFT - 9)))
+# define VMALLOC_END		vmalloc_end
+  extern unsigned long vmalloc_end;
+#else
+# define VMALLOC_END		(0xa000000000000000UL + (1UL << (4*PAGE_SHIFT - 9)))
+#endif
+
+/* fs/proc/kcore.c */
+#define	kc_vaddr_to_offset(v) ((v) - 0xa000000000000000UL)
+#define	kc_offset_to_vaddr(o) ((o) + 0xa000000000000000UL)
+
+/*
+ * Conversion functions: convert page frame number (pfn) and a protection value to a page
+ * table entry (pte).
+ */
+#define pfn_pte(pfn, pgprot) \
+({ pte_t __pte; pte_val(__pte) = ((pfn) << PAGE_SHIFT) | pgprot_val(pgprot); __pte; })
+
+/* Extract pfn from pte.  */
+#define pte_pfn(_pte)		((pte_val(_pte) & _PFN_MASK) >> PAGE_SHIFT)
+
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+/* This takes a physical page address that is used by the remapping functions */
+#define mk_pte_phys(physpage, pgprot) \
+({ pte_t __pte; pte_val(__pte) = physpage + pgprot_val(pgprot); __pte; })
+
+#define pte_modify(_pte, newprot) \
+	(__pte((pte_val(_pte) & ~_PAGE_CHG_MASK) | (pgprot_val(newprot) & _PAGE_CHG_MASK)))
+
+#define page_pte_prot(page,prot)	mk_pte(page, prot)
+#define page_pte(page)			page_pte_prot(page, __pgprot(0))
+
+#define pte_none(pte) 			(!pte_val(pte))
+#define pte_present(pte)		(pte_val(pte) & (_PAGE_P | _PAGE_PROTNONE))
+#define pte_clear(mm,addr,pte)		(pte_val(*(pte)) = 0UL)
+/* pte_page() returns the "struct page *" corresponding to the PTE: */
+#define pte_page(pte)			virt_to_page(((pte_val(pte) & _PFN_MASK) + PAGE_OFFSET))
+
+#define pmd_none(pmd)			(!pmd_val(pmd))
+#define pmd_bad(pmd)			(!ia64_phys_addr_valid(pmd_val(pmd)))
+#define pmd_present(pmd)		(pmd_val(pmd) != 0UL)
+#define pmd_clear(pmdp)			(pmd_val(*(pmdp)) = 0UL)
+#define pmd_page_kernel(pmd)		((unsigned long) __va(pmd_val(pmd) & _PFN_MASK))
+#define pmd_page(pmd)			virt_to_page((pmd_val(pmd) + PAGE_OFFSET))
+
+#define pud_none(pud)			(!pud_val(pud))
+#define pud_bad(pud)			(!ia64_phys_addr_valid(pud_val(pud)))
+#define pud_present(pud)		(pud_val(pud) != 0UL)
+#define pud_clear(pudp)			(pud_val(*(pudp)) = 0UL)
+
+#define pud_page(pud)			((unsigned long) __va(pud_val(pud) & _PFN_MASK))
+
+/*
+ * The following have defined behavior only work if pte_present() is true.
+ */
+#define pte_user(pte)		((pte_val(pte) & _PAGE_PL_MASK) == _PAGE_PL_3)
+#define pte_read(pte)		(((pte_val(pte) & _PAGE_AR_MASK) >> _PAGE_AR_SHIFT) < 6)
+#define pte_write(pte)	((unsigned) (((pte_val(pte) & _PAGE_AR_MASK) >> _PAGE_AR_SHIFT) - 2) <= 4)
+#define pte_exec(pte)		((pte_val(pte) & _PAGE_AR_RX) != 0)
+#define pte_dirty(pte)		((pte_val(pte) & _PAGE_D) != 0)
+#define pte_young(pte)		((pte_val(pte) & _PAGE_A) != 0)
+#define pte_file(pte)		((pte_val(pte) & _PAGE_FILE) != 0)
+/*
+ * Note: we convert AR_RWX to AR_RX and AR_RW to AR_R by clearing the 2nd bit in the
+ * access rights:
+ */
+#define pte_wrprotect(pte)	(__pte(pte_val(pte) & ~_PAGE_AR_RW))
+#define pte_mkwrite(pte)	(__pte(pte_val(pte) | _PAGE_AR_RW))
+#define pte_mkexec(pte)		(__pte(pte_val(pte) | _PAGE_AR_RX))
+#define pte_mkold(pte)		(__pte(pte_val(pte) & ~_PAGE_A))
+#define pte_mkyoung(pte)	(__pte(pte_val(pte) | _PAGE_A))
+#define pte_mkclean(pte)	(__pte(pte_val(pte) & ~_PAGE_D))
+#define pte_mkdirty(pte)	(__pte(pte_val(pte) | _PAGE_D))
+
+/*
+ * Macro to a page protection value as "uncacheable".  Note that "protection" is really a
+ * misnomer here as the protection value contains the memory attribute bits, dirty bits,
+ * and various other bits as well.
+ */
+#define pgprot_noncached(prot)		__pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_UC)
+
+/*
+ * Macro to make mark a page protection value as "write-combining".
+ * Note that "protection" is really a misnomer here as the protection
+ * value contains the memory attribute bits, dirty bits, and various
+ * other bits as well.  Accesses through a write-combining translation
+ * works bypasses the caches, but does allow for consecutive writes to
+ * be combined into single (but larger) write transactions.
+ */
+#define pgprot_writecombine(prot)	__pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WC)
+
+static inline unsigned long
+pgd_index (unsigned long address)
+{
+	unsigned long region = address >> 61;
+	unsigned long l1index = (address >> PGDIR_SHIFT) & ((PTRS_PER_PGD >> 3) - 1);
+
+	return (region << (PAGE_SHIFT - 6)) | l1index;
+}
+
+/* The offset in the 1-level directory is given by the 3 region bits
+   (61..63) and the level-1 bits.  */
+static inline pgd_t*
+pgd_offset (struct mm_struct *mm, unsigned long address)
+{
+	return mm->pgd + pgd_index(address);
+}
+
+/* In the kernel's mapped region we completely ignore the region number
+   (since we know it's in region number 5). */
+#define pgd_offset_k(addr) \
+	(init_mm.pgd + (((addr) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)))
+
+/* Look up a pgd entry in the gate area.  On IA-64, the gate-area
+   resides in the kernel-mapped segment, hence we use pgd_offset_k()
+   here.  */
+#define pgd_offset_gate(mm, addr)	pgd_offset_k(addr)
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(dir,addr) \
+	((pmd_t *) pud_page(*(dir)) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
+
+/*
+ * Find an entry in the third-level page table.  This looks more complicated than it
+ * should be because some platforms place page tables in high memory.
+ */
+#define pte_index(addr)	 	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir,addr)	((pte_t *) pmd_page_kernel(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir,addr)	pte_offset_kernel(dir, addr)
+#define pte_offset_map_nested(dir,addr)	pte_offset_map(dir, addr)
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+/* atomic versions of the some PTE manipulations: */
+
+static inline int
+ptep_test_and_clear_young (struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	if (!pte_young(*ptep))
+		return 0;
+	return test_and_clear_bit(_PAGE_A_BIT, ptep);
+#else
+	pte_t pte = *ptep;
+	if (!pte_young(pte))
+		return 0;
+	set_pte_at(vma->vm_mm, addr, ptep, pte_mkold(pte));
+	return 1;
+#endif
+}
+
+static inline int
+ptep_test_and_clear_dirty (struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	if (!pte_dirty(*ptep))
+		return 0;
+	return test_and_clear_bit(_PAGE_D_BIT, ptep);
+#else
+	pte_t pte = *ptep;
+	if (!pte_dirty(pte))
+		return 0;
+	set_pte_at(vma->vm_mm, addr, ptep, pte_mkclean(pte));
+	return 1;
+#endif
+}
+
+static inline pte_t
+ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	return __pte(xchg((long *) ptep, 0));
+#else
+	pte_t pte = *ptep;
+	pte_clear(mm, addr, ptep);
+	return pte;
+#endif
+}
+
+static inline void
+ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	unsigned long new, old;
+
+	do {
+		old = pte_val(*ptep);
+		new = pte_val(pte_wrprotect(__pte (old)));
+	} while (cmpxchg((unsigned long *) ptep, old, new) != old);
+#else
+	pte_t old_pte = *ptep;
+	set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
+#endif
+}
+
+static inline int
+pte_same (pte_t a, pte_t b)
+{
+	return pte_val(a) == pte_val(b);
+}
+
+#define update_mmu_cache(vma, address, pte) do { } while (0)
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void paging_init (void);
+
+/*
+ * Note: The macros below rely on the fact that MAX_SWAPFILES_SHIFT <= number of
+ *	 bits in the swap-type field of the swap pte.  It would be nice to
+ *	 enforce that, but we can't easily include <linux/swap.h> here.
+ *	 (Of course, better still would be to define MAX_SWAPFILES_SHIFT here...).
+ *
+ * Format of swap pte:
+ *	bit   0   : present bit (must be zero)
+ *	bit   1   : _PAGE_FILE (must be zero)
+ *	bits  2- 8: swap-type
+ *	bits  9-62: swap offset
+ *	bit  63   : _PAGE_PROTNONE bit
+ *
+ * Format of file pte:
+ *	bit   0   : present bit (must be zero)
+ *	bit   1   : _PAGE_FILE (must be one)
+ *	bits  2-62: file_offset/PAGE_SIZE
+ *	bit  63   : _PAGE_PROTNONE bit
+ */
+#define __swp_type(entry)		(((entry).val >> 2) & 0x7f)
+#define __swp_offset(entry)		(((entry).val << 1) >> 10)
+#define __swp_entry(type,offset)	((swp_entry_t) { ((type) << 2) | ((long) (offset) << 9) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#define PTE_FILE_MAX_BITS		61
+#define pte_to_pgoff(pte)		((pte_val(pte) << 1) >> 3)
+#define pgoff_to_pte(off)		((pte_t) { ((off) << 2) | _PAGE_FILE })
+
+/* XXX is this right? */
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
+extern struct page *zero_page_memmap_ptr;
+#define ZERO_PAGE(vaddr) (zero_page_memmap_ptr)
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HUGETLB_PGDIR_SHIFT	(HPAGE_SHIFT + 2*(PAGE_SHIFT-3))
+#define HUGETLB_PGDIR_SIZE	(__IA64_UL(1) << HUGETLB_PGDIR_SHIFT)
+#define HUGETLB_PGDIR_MASK	(~(HUGETLB_PGDIR_SIZE-1))
+struct mmu_gather;
+extern void hugetlb_free_pgtables(struct mmu_gather *tlb,
+	struct vm_area_struct * prev, unsigned long start, unsigned long end);
+#endif
+
+/*
+ * IA-64 doesn't have any external MMU info: the page tables contain all the necessary
+ * information.  However, we use this routine to take care of any (delayed) i-cache
+ * flushing that may be necessary.
+ */
+extern void lazy_mmu_prot_update (pte_t pte);
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+/*
+ * Update PTEP with ENTRY, which is guaranteed to be a less
+ * restrictive PTE.  That is, ENTRY may have the ACCESSED, DIRTY, and
+ * WRITABLE bits turned on, when the value at PTEP did not.  The
+ * WRITABLE bit may only be turned if SAFELY_WRITABLE is TRUE.
+ *
+ * SAFELY_WRITABLE is TRUE if we can update the value at PTEP without
+ * having to worry about races.  On SMP machines, there are only two
+ * cases where this is true:
+ *
+ *	(1) *PTEP has the PRESENT bit turned OFF
+ *	(2) ENTRY has the DIRTY bit turned ON
+ *
+ * On ia64, we could implement this routine with a cmpxchg()-loop
+ * which ORs in the _PAGE_A/_PAGE_D bit if they're set in ENTRY.
+ * However, like on x86, we can get a more streamlined version by
+ * observing that it is OK to drop ACCESSED bit updates when
+ * SAFELY_WRITABLE is FALSE.  Besides being rare, all that would do is
+ * result in an extra Access-bit fault, which would then turn on the
+ * ACCESSED bit in the low-level fault handler (iaccess_bit or
+ * daccess_bit in ivt.S).
+ */
+#ifdef CONFIG_SMP
+# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable)	\
+do {											\
+	if (__safely_writable) {							\
+		set_pte(__ptep, __entry);						\
+		flush_tlb_page(__vma, __addr);						\
+	}										\
+} while (0)
+#else
+# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable)	\
+	ptep_establish(__vma, __addr, __ptep, __entry)
+#endif
+
+#  ifdef CONFIG_VIRTUAL_MEM_MAP
+  /* arch mem_map init routine is needed due to holes in a virtual mem_map */
+#   define __HAVE_ARCH_MEMMAP_INIT
+    extern void memmap_init (unsigned long size, int nid, unsigned long zone,
+			     unsigned long start_pfn);
+#  endif /* CONFIG_VIRTUAL_MEM_MAP */
+# endif /* !__ASSEMBLY__ */
+
+/*
+ * Identity-mapped regions use a large page size.  We'll call such large pages
+ * "granules".  If you can think of a better name that's unambiguous, let me
+ * know...
+ */
+#if defined(CONFIG_IA64_GRANULE_64MB)
+# define IA64_GRANULE_SHIFT	_PAGE_SIZE_64M
+#elif defined(CONFIG_IA64_GRANULE_16MB)
+# define IA64_GRANULE_SHIFT	_PAGE_SIZE_16M
+#endif
+#define IA64_GRANULE_SIZE	(1 << IA64_GRANULE_SHIFT)
+/*
+ * log2() of the page size we use to map the kernel image (IA64_TR_KERNEL):
+ */
+#define KERNEL_TR_PAGE_SHIFT	_PAGE_SIZE_64M
+#define KERNEL_TR_PAGE_SIZE	(1 << KERNEL_TR_PAGE_SHIFT)
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+/* These tell get_user_pages() that the first gate page is accessible from user-level.  */
+#define FIXADDR_USER_START	GATE_ADDR
+#define FIXADDR_USER_END	(GATE_ADDR + 2*PERCPU_PAGE_SIZE)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#define __HAVE_ARCH_PGD_OFFSET_GATE
+#define __HAVE_ARCH_LAZY_MMU_PROT_UPDATE
+
+/*
+ * Override for pgd_addr_end() to deal with the virtual address space holes
+ * in each region.  In regions 0..4 virtual address bits are used like this:
+ *      +--------+------+--------+-----+-----+--------+
+ *      | pgdhi3 | rsvd | pgdlow | pmd | pte | offset |
+ *      +--------+------+--------+-----+-----+--------+
+ *  'pgdlow' overflows to pgdhi3 (a.k.a. region bits) leaving rsvd==0
+ */
+#define IA64_PGD_OVERFLOW (PGDIR_SIZE << (PAGE_SHIFT-6))
+
+#define pgd_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + PGDIR_SIZE) & PGDIR_MASK;	\
+ 	if (REGION_NUMBER(__boundary) < 5 && 				\
+	    __boundary & IA64_PGD_OVERFLOW)				\
+		__boundary += (RGN_SIZE - 1) & ~(IA64_PGD_OVERFLOW - 1);\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+
+#define pmd_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + PMD_SIZE) & PMD_MASK;	\
+ 	if (REGION_NUMBER(__boundary) < 5 &&				\
+	    __boundary & IA64_PGD_OVERFLOW)				\
+		__boundary += (RGN_SIZE - 1) & ~(IA64_PGD_OVERFLOW - 1);\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+
+#include <asm-generic/pgtable-nopud.h>
+#include <asm-generic/pgtable.h>
+
+#endif /* _ASM_IA64_PGTABLE_H */
diff --git a/include/asm-ia64/poll.h b/include/asm-ia64/poll.h
new file mode 100644
index 000000000000..160258a0528d
--- /dev/null
+++ b/include/asm-ia64/poll.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_IA64_POLL_H
+#define _ASM_IA64_POLL_H
+
+/*
+ * poll(2) bit definitions.  Based on <asm-i386/poll.h>.
+ *
+ * Modified 1998, 1999, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#define POLLWRNORM	0x0100
+#define POLLWRBAND	0x0200
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif /* _ASM_IA64_POLL_H */
diff --git a/include/asm-ia64/posix_types.h b/include/asm-ia64/posix_types.h
new file mode 100644
index 000000000000..adb62272694f
--- /dev/null
+++ b/include/asm-ia64/posix_types.h
@@ -0,0 +1,126 @@
+#ifndef _ASM_IA64_POSIX_TYPES_H
+#define _ASM_IA64_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ *
+ * Based on <asm-alpha/posix_types.h>.
+ *
+ * Modified 1998-2000, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned int	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef long long	__kernel_loff_t;
+typedef int		__kernel_pid_t;
+typedef int		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned long	__kernel_sigset_t;	/* at least 32 bits */
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+typedef __kernel_uid_t __kernel_uid32_t;
+typedef __kernel_gid_t __kernel_gid32_t;
+
+typedef unsigned int	__kernel_old_dev_t;
+
+# ifdef __KERNEL__
+
+#  ifndef __GNUC__
+
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define	__FD_ISSET(d, set)	(((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
+#define	__FD_ZERO(set)	\
+  ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+
+#  else /* !__GNUC__ */
+
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, const __kernel_fd_set *p)
+{ 
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		      case 16:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			return;
+
+		      case 8:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			return;
+
+		      case 4:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#  endif /* !__GNUC__ */
+# endif /* __KERNEL__ */
+#endif /* _ASM_IA64_POSIX_TYPES_H */
diff --git a/include/asm-ia64/processor.h b/include/asm-ia64/processor.h
new file mode 100644
index 000000000000..8769dd9df369
--- /dev/null
+++ b/include/asm-ia64/processor.h
@@ -0,0 +1,698 @@
+#ifndef _ASM_IA64_PROCESSOR_H
+#define _ASM_IA64_PROCESSOR_H
+
+/*
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ *
+ * 11/24/98	S.Eranian	added ia64_set_iva()
+ * 12/03/99	D. Mosberger	implement thread_saved_pc() via kernel unwind API
+ * 06/16/00	A. Mallick	added csd/ssd/tssd for ia32 support
+ */
+
+#include <linux/config.h>
+
+#include <asm/intrinsics.h>
+#include <asm/kregs.h>
+#include <asm/ptrace.h>
+#include <asm/ustack.h>
+
+/* Our arch specific arch_init_sched_domain is in arch/ia64/kernel/domain.c */
+#define ARCH_HAS_SCHED_DOMAIN
+
+#define IA64_NUM_DBG_REGS	8
+/*
+ * Limits for PMC and PMD are set to less than maximum architected values
+ * but should be sufficient for a while
+ */
+#define IA64_NUM_PMC_REGS	32
+#define IA64_NUM_PMD_REGS	32
+
+#define DEFAULT_MAP_BASE	__IA64_UL_CONST(0x2000000000000000)
+#define DEFAULT_TASK_SIZE	__IA64_UL_CONST(0xa000000000000000)
+
+/*
+ * TASK_SIZE really is a mis-named.  It really is the maximum user
+ * space address (plus one).  On IA-64, there are five regions of 2TB
+ * each (assuming 8KB page size), for a total of 8TB of user virtual
+ * address space.
+ */
+#define TASK_SIZE		(current->thread.task_size)
+
+/*
+ * MM_VM_SIZE(mm) gives the maximum address (plus 1) which may contain a mapping for
+ * address-space MM.  Note that with 32-bit tasks, this is still DEFAULT_TASK_SIZE,
+ * because the kernel may have installed helper-mappings above TASK_SIZE.  For example,
+ * for x86 emulation, the LDT and GDT are mapped above TASK_SIZE.
+ */
+#define MM_VM_SIZE(mm)		DEFAULT_TASK_SIZE
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(current->thread.map_base)
+
+#define IA64_THREAD_FPH_VALID	(__IA64_UL(1) << 0)	/* floating-point high state valid? */
+#define IA64_THREAD_DBG_VALID	(__IA64_UL(1) << 1)	/* debug registers valid? */
+#define IA64_THREAD_PM_VALID	(__IA64_UL(1) << 2)	/* performance registers valid? */
+#define IA64_THREAD_UAC_NOPRINT	(__IA64_UL(1) << 3)	/* don't log unaligned accesses */
+#define IA64_THREAD_UAC_SIGBUS	(__IA64_UL(1) << 4)	/* generate SIGBUS on unaligned acc. */
+							/* bit 5 is currently unused */
+#define IA64_THREAD_FPEMU_NOPRINT (__IA64_UL(1) << 6)	/* don't log any fpswa faults */
+#define IA64_THREAD_FPEMU_SIGFPE  (__IA64_UL(1) << 7)	/* send a SIGFPE for fpswa faults */
+
+#define IA64_THREAD_UAC_SHIFT	3
+#define IA64_THREAD_UAC_MASK	(IA64_THREAD_UAC_NOPRINT | IA64_THREAD_UAC_SIGBUS)
+#define IA64_THREAD_FPEMU_SHIFT	6
+#define IA64_THREAD_FPEMU_MASK	(IA64_THREAD_FPEMU_NOPRINT | IA64_THREAD_FPEMU_SIGFPE)
+
+
+/*
+ * This shift should be large enough to be able to represent 1000000000/itc_freq with good
+ * accuracy while being small enough to fit 10*1000000000<<IA64_NSEC_PER_CYC_SHIFT in 64 bits
+ * (this will give enough slack to represent 10 seconds worth of time as a scaled number).
+ */
+#define IA64_NSEC_PER_CYC_SHIFT	30
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cache.h>
+#include <linux/compiler.h>
+#include <linux/threads.h>
+#include <linux/types.h>
+
+#include <asm/fpu.h>
+#include <asm/page.h>
+#include <asm/percpu.h>
+#include <asm/rse.h>
+#include <asm/unwind.h>
+#include <asm/atomic.h>
+#ifdef CONFIG_NUMA
+#include <asm/nodedata.h>
+#endif
+
+/* like above but expressed as bitfields for more efficient access: */
+struct ia64_psr {
+	__u64 reserved0 : 1;
+	__u64 be : 1;
+	__u64 up : 1;
+	__u64 ac : 1;
+	__u64 mfl : 1;
+	__u64 mfh : 1;
+	__u64 reserved1 : 7;
+	__u64 ic : 1;
+	__u64 i : 1;
+	__u64 pk : 1;
+	__u64 reserved2 : 1;
+	__u64 dt : 1;
+	__u64 dfl : 1;
+	__u64 dfh : 1;
+	__u64 sp : 1;
+	__u64 pp : 1;
+	__u64 di : 1;
+	__u64 si : 1;
+	__u64 db : 1;
+	__u64 lp : 1;
+	__u64 tb : 1;
+	__u64 rt : 1;
+	__u64 reserved3 : 4;
+	__u64 cpl : 2;
+	__u64 is : 1;
+	__u64 mc : 1;
+	__u64 it : 1;
+	__u64 id : 1;
+	__u64 da : 1;
+	__u64 dd : 1;
+	__u64 ss : 1;
+	__u64 ri : 2;
+	__u64 ed : 1;
+	__u64 bn : 1;
+	__u64 reserved4 : 19;
+};
+
+/*
+ * CPU type, hardware bug flags, and per-CPU state.  Frequently used
+ * state comes earlier:
+ */
+struct cpuinfo_ia64 {
+	__u32 softirq_pending;
+	__u64 itm_delta;	/* # of clock cycles between clock ticks */
+	__u64 itm_next;		/* interval timer mask value to use for next clock tick */
+	__u64 nsec_per_cyc;	/* (1000000000<<IA64_NSEC_PER_CYC_SHIFT)/itc_freq */
+	__u64 unimpl_va_mask;	/* mask of unimplemented virtual address bits (from PAL) */
+	__u64 unimpl_pa_mask;	/* mask of unimplemented physical address bits (from PAL) */
+	__u64 *pgd_quick;
+	__u64 *pmd_quick;
+	__u64 pgtable_cache_sz;
+	__u64 itc_freq;		/* frequency of ITC counter */
+	__u64 proc_freq;	/* frequency of processor */
+	__u64 cyc_per_usec;	/* itc_freq/1000000 */
+	__u64 ptce_base;
+	__u32 ptce_count[2];
+	__u32 ptce_stride[2];
+	struct task_struct *ksoftirqd;	/* kernel softirq daemon for this CPU */
+
+#ifdef CONFIG_SMP
+	__u64 loops_per_jiffy;
+	int cpu;
+#endif
+
+	/* CPUID-derived information: */
+	__u64 ppn;
+	__u64 features;
+	__u8 number;
+	__u8 revision;
+	__u8 model;
+	__u8 family;
+	__u8 archrev;
+	char vendor[16];
+
+#ifdef CONFIG_NUMA
+	struct ia64_node_data *node_data;
+#endif
+};
+
+DECLARE_PER_CPU(struct cpuinfo_ia64, cpu_info);
+
+/*
+ * The "local" data variable.  It refers to the per-CPU data of the currently executing
+ * CPU, much like "current" points to the per-task data of the currently executing task.
+ * Do not use the address of local_cpu_data, since it will be different from
+ * cpu_data(smp_processor_id())!
+ */
+#define local_cpu_data		(&__ia64_per_cpu_var(cpu_info))
+#define cpu_data(cpu)		(&per_cpu(cpu_info, cpu))
+
+extern void identify_cpu (struct cpuinfo_ia64 *);
+extern void print_cpu_info (struct cpuinfo_ia64 *);
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define SET_UNALIGN_CTL(task,value)								\
+({												\
+	(task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_UAC_MASK)			\
+				| (((value) << IA64_THREAD_UAC_SHIFT) & IA64_THREAD_UAC_MASK));	\
+	0;											\
+})
+#define GET_UNALIGN_CTL(task,addr)								\
+({												\
+	put_user(((task)->thread.flags & IA64_THREAD_UAC_MASK) >> IA64_THREAD_UAC_SHIFT,	\
+		 (int __user *) (addr));							\
+})
+
+#define SET_FPEMU_CTL(task,value)								\
+({												\
+	(task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_FPEMU_MASK)		\
+			  | (((value) << IA64_THREAD_FPEMU_SHIFT) & IA64_THREAD_FPEMU_MASK));	\
+	0;											\
+})
+#define GET_FPEMU_CTL(task,addr)								\
+({												\
+	put_user(((task)->thread.flags & IA64_THREAD_FPEMU_MASK) >> IA64_THREAD_FPEMU_SHIFT,	\
+		 (int __user *) (addr));							\
+})
+
+#ifdef CONFIG_IA32_SUPPORT
+struct desc_struct {
+	unsigned int a, b;
+};
+
+#define desc_empty(desc)		(!((desc)->a + (desc)->b))
+#define desc_equal(desc1, desc2)	(((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
+
+#define GDT_ENTRY_TLS_ENTRIES	3
+#define GDT_ENTRY_TLS_MIN	6
+#define GDT_ENTRY_TLS_MAX 	(GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
+
+#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
+
+struct partial_page_list;
+#endif
+
+struct thread_struct {
+	__u32 flags;			/* various thread flags (see IA64_THREAD_*) */
+	/* writing on_ustack is performance-critical, so it's worth spending 8 bits on it... */
+	__u8 on_ustack;			/* executing on user-stacks? */
+	__u8 pad[3];
+	__u64 ksp;			/* kernel stack pointer */
+	__u64 map_base;			/* base address for get_unmapped_area() */
+	__u64 task_size;		/* limit for task size */
+	__u64 rbs_bot;			/* the base address for the RBS */
+	int last_fph_cpu;		/* CPU that may hold the contents of f32-f127 */
+
+#ifdef CONFIG_IA32_SUPPORT
+	__u64 eflag;			/* IA32 EFLAGS reg */
+	__u64 fsr;			/* IA32 floating pt status reg */
+	__u64 fcr;			/* IA32 floating pt control reg */
+	__u64 fir;			/* IA32 fp except. instr. reg */
+	__u64 fdr;			/* IA32 fp except. data reg */
+	__u64 old_k1;			/* old value of ar.k1 */
+	__u64 old_iob;			/* old IOBase value */
+	struct partial_page_list *ppl;	/* partial page list for 4K page size issue */
+        /* cached TLS descriptors. */
+	struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
+
+# define INIT_THREAD_IA32	.eflag =	0,			\
+				.fsr =		0,			\
+				.fcr =		0x17800000037fULL,	\
+				.fir =		0,			\
+				.fdr =		0,			\
+				.old_k1 =	0,			\
+				.old_iob =	0,			\
+				.ppl =		NULL,
+#else
+# define INIT_THREAD_IA32
+#endif /* CONFIG_IA32_SUPPORT */
+#ifdef CONFIG_PERFMON
+	__u64 pmcs[IA64_NUM_PMC_REGS];
+	__u64 pmds[IA64_NUM_PMD_REGS];
+	void *pfm_context;		     /* pointer to detailed PMU context */
+	unsigned long pfm_needs_checking;    /* when >0, pending perfmon work on kernel exit */
+# define INIT_THREAD_PM		.pmcs =			{0UL, },  \
+				.pmds =			{0UL, },  \
+				.pfm_context =		NULL,     \
+				.pfm_needs_checking =	0UL,
+#else
+# define INIT_THREAD_PM
+#endif
+	__u64 dbr[IA64_NUM_DBG_REGS];
+	__u64 ibr[IA64_NUM_DBG_REGS];
+	struct ia64_fpreg fph[96];	/* saved/loaded on demand */
+};
+
+#define INIT_THREAD {						\
+	.flags =	0,					\
+	.on_ustack =	0,					\
+	.ksp =		0,					\
+	.map_base =	DEFAULT_MAP_BASE,			\
+	.rbs_bot =	STACK_TOP - DEFAULT_USER_STACK_SIZE,	\
+	.task_size =	DEFAULT_TASK_SIZE,			\
+	.last_fph_cpu =  -1,					\
+	INIT_THREAD_IA32					\
+	INIT_THREAD_PM						\
+	.dbr =		{0, },					\
+	.ibr =		{0, },					\
+	.fph =		{{{{0}}}, }				\
+}
+
+#define start_thread(regs,new_ip,new_sp) do {							\
+	set_fs(USER_DS);									\
+	regs->cr_ipsr = ((regs->cr_ipsr | (IA64_PSR_BITS_TO_SET | IA64_PSR_CPL))		\
+			 & ~(IA64_PSR_BITS_TO_CLEAR | IA64_PSR_RI | IA64_PSR_IS));		\
+	regs->cr_iip = new_ip;									\
+	regs->ar_rsc = 0xf;		/* eager mode, privilege level 3 */			\
+	regs->ar_rnat = 0;									\
+	regs->ar_bspstore = current->thread.rbs_bot;						\
+	regs->ar_fpsr = FPSR_DEFAULT;								\
+	regs->loadrs = 0;									\
+	regs->r8 = current->mm->dumpable;	/* set "don't zap registers" flag */		\
+	regs->r12 = new_sp - 16;	/* allocate 16 byte scratch area */			\
+	if (unlikely(!current->mm->dumpable)) {							\
+		/*										\
+		 * Zap scratch regs to avoid leaking bits between processes with different	\
+		 * uid/privileges.								\
+		 */										\
+		regs->ar_pfs = 0; regs->b0 = 0; regs->pr = 0;					\
+		regs->r1 = 0; regs->r9  = 0; regs->r11 = 0; regs->r13 = 0; regs->r15 = 0;	\
+	}											\
+} while (0)
+
+/* Forward declarations, a strange C thing... */
+struct mm_struct;
+struct task_struct;
+
+/*
+ * Free all resources held by a thread. This is called after the
+ * parent of DEAD_TASK has collected the exit status of the task via
+ * wait().
+ */
+#define release_thread(dead_task)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * This is the mechanism for creating a new kernel thread.
+ *
+ * NOTE 1: Only a kernel-only process (ie the swapper or direct
+ * descendants who haven't done an "execve()") should use this: it
+ * will work within a system call from a "real" process, but the
+ * process memory space will not be free'd until both the parent and
+ * the child have exited.
+ *
+ * NOTE 2: This MUST NOT be an inlined function.  Otherwise, we get
+ * into trouble in init/main.c when the child thread returns to
+ * do_basic_setup() and the timing is such that free_initmem() has
+ * been called already.
+ */
+extern pid_t kernel_thread (int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Get wait channel for task P.  */
+extern unsigned long get_wchan (struct task_struct *p);
+
+/* Return instruction pointer of blocked task TSK.  */
+#define KSTK_EIP(tsk)					\
+  ({							\
+	struct pt_regs *_regs = ia64_task_regs(tsk);	\
+	_regs->cr_iip + ia64_psr(_regs)->ri;		\
+  })
+
+/* Return stack pointer of blocked task TSK.  */
+#define KSTK_ESP(tsk)  ((tsk)->thread.ksp)
+
+extern void ia64_getreg_unknown_kr (void);
+extern void ia64_setreg_unknown_kr (void);
+
+#define ia64_get_kr(regnum)					\
+({								\
+	unsigned long r = 0;					\
+								\
+	switch (regnum) {					\
+	    case 0: r = ia64_getreg(_IA64_REG_AR_KR0); break;	\
+	    case 1: r = ia64_getreg(_IA64_REG_AR_KR1); break;	\
+	    case 2: r = ia64_getreg(_IA64_REG_AR_KR2); break;	\
+	    case 3: r = ia64_getreg(_IA64_REG_AR_KR3); break;	\
+	    case 4: r = ia64_getreg(_IA64_REG_AR_KR4); break;	\
+	    case 5: r = ia64_getreg(_IA64_REG_AR_KR5); break;	\
+	    case 6: r = ia64_getreg(_IA64_REG_AR_KR6); break;	\
+	    case 7: r = ia64_getreg(_IA64_REG_AR_KR7); break;	\
+	    default: ia64_getreg_unknown_kr(); break;		\
+	}							\
+	r;							\
+})
+
+#define ia64_set_kr(regnum, r) 					\
+({								\
+	switch (regnum) {					\
+	    case 0: ia64_setreg(_IA64_REG_AR_KR0, r); break;	\
+	    case 1: ia64_setreg(_IA64_REG_AR_KR1, r); break;	\
+	    case 2: ia64_setreg(_IA64_REG_AR_KR2, r); break;	\
+	    case 3: ia64_setreg(_IA64_REG_AR_KR3, r); break;	\
+	    case 4: ia64_setreg(_IA64_REG_AR_KR4, r); break;	\
+	    case 5: ia64_setreg(_IA64_REG_AR_KR5, r); break;	\
+	    case 6: ia64_setreg(_IA64_REG_AR_KR6, r); break;	\
+	    case 7: ia64_setreg(_IA64_REG_AR_KR7, r); break;	\
+	    default: ia64_setreg_unknown_kr(); break;		\
+	}							\
+})
+
+/*
+ * The following three macros can't be inline functions because we don't have struct
+ * task_struct at this point.
+ */
+
+/* Return TRUE if task T owns the fph partition of the CPU we're running on. */
+#define ia64_is_local_fpu_owner(t)								\
+({												\
+	struct task_struct *__ia64_islfo_task = (t);						\
+	(__ia64_islfo_task->thread.last_fph_cpu == smp_processor_id()				\
+	 && __ia64_islfo_task == (struct task_struct *) ia64_get_kr(IA64_KR_FPU_OWNER));	\
+})
+
+/* Mark task T as owning the fph partition of the CPU we're running on. */
+#define ia64_set_local_fpu_owner(t) do {						\
+	struct task_struct *__ia64_slfo_task = (t);					\
+	__ia64_slfo_task->thread.last_fph_cpu = smp_processor_id();			\
+	ia64_set_kr(IA64_KR_FPU_OWNER, (unsigned long) __ia64_slfo_task);		\
+} while (0)
+
+/* Mark the fph partition of task T as being invalid on all CPUs.  */
+#define ia64_drop_fpu(t)	((t)->thread.last_fph_cpu = -1)
+
+extern void __ia64_init_fpu (void);
+extern void __ia64_save_fpu (struct ia64_fpreg *fph);
+extern void __ia64_load_fpu (struct ia64_fpreg *fph);
+extern void ia64_save_debug_regs (unsigned long *save_area);
+extern void ia64_load_debug_regs (unsigned long *save_area);
+
+#ifdef CONFIG_IA32_SUPPORT
+extern void ia32_save_state (struct task_struct *task);
+extern void ia32_load_state (struct task_struct *task);
+#endif
+
+#define ia64_fph_enable()	do { ia64_rsm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
+#define ia64_fph_disable()	do { ia64_ssm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
+
+/* load fp 0.0 into fph */
+static inline void
+ia64_init_fpu (void) {
+	ia64_fph_enable();
+	__ia64_init_fpu();
+	ia64_fph_disable();
+}
+
+/* save f32-f127 at FPH */
+static inline void
+ia64_save_fpu (struct ia64_fpreg *fph) {
+	ia64_fph_enable();
+	__ia64_save_fpu(fph);
+	ia64_fph_disable();
+}
+
+/* load f32-f127 from FPH */
+static inline void
+ia64_load_fpu (struct ia64_fpreg *fph) {
+	ia64_fph_enable();
+	__ia64_load_fpu(fph);
+	ia64_fph_disable();
+}
+
+static inline __u64
+ia64_clear_ic (void)
+{
+	__u64 psr;
+	psr = ia64_getreg(_IA64_REG_PSR);
+	ia64_stop();
+	ia64_rsm(IA64_PSR_I | IA64_PSR_IC);
+	ia64_srlz_i();
+	return psr;
+}
+
+/*
+ * Restore the psr.
+ */
+static inline void
+ia64_set_psr (__u64 psr)
+{
+	ia64_stop();
+	ia64_setreg(_IA64_REG_PSR_L, psr);
+	ia64_srlz_d();
+}
+
+/*
+ * Insert a translation into an instruction and/or data translation
+ * register.
+ */
+static inline void
+ia64_itr (__u64 target_mask, __u64 tr_num,
+	  __u64 vmaddr, __u64 pte,
+	  __u64 log_page_size)
+{
+	ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2));
+	ia64_setreg(_IA64_REG_CR_IFA, vmaddr);
+	ia64_stop();
+	if (target_mask & 0x1)
+		ia64_itri(tr_num, pte);
+	if (target_mask & 0x2)
+		ia64_itrd(tr_num, pte);
+}
+
+/*
+ * Insert a translation into the instruction and/or data translation
+ * cache.
+ */
+static inline void
+ia64_itc (__u64 target_mask, __u64 vmaddr, __u64 pte,
+	  __u64 log_page_size)
+{
+	ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2));
+	ia64_setreg(_IA64_REG_CR_IFA, vmaddr);
+	ia64_stop();
+	/* as per EAS2.6, itc must be the last instruction in an instruction group */
+	if (target_mask & 0x1)
+		ia64_itci(pte);
+	if (target_mask & 0x2)
+		ia64_itcd(pte);
+}
+
+/*
+ * Purge a range of addresses from instruction and/or data translation
+ * register(s).
+ */
+static inline void
+ia64_ptr (__u64 target_mask, __u64 vmaddr, __u64 log_size)
+{
+	if (target_mask & 0x1)
+		ia64_ptri(vmaddr, (log_size << 2));
+	if (target_mask & 0x2)
+		ia64_ptrd(vmaddr, (log_size << 2));
+}
+
+/* Set the interrupt vector address.  The address must be suitably aligned (32KB).  */
+static inline void
+ia64_set_iva (void *ivt_addr)
+{
+	ia64_setreg(_IA64_REG_CR_IVA, (__u64) ivt_addr);
+	ia64_srlz_i();
+}
+
+/* Set the page table address and control bits.  */
+static inline void
+ia64_set_pta (__u64 pta)
+{
+	/* Note: srlz.i implies srlz.d */
+	ia64_setreg(_IA64_REG_CR_PTA, pta);
+	ia64_srlz_i();
+}
+
+static inline void
+ia64_eoi (void)
+{
+	ia64_setreg(_IA64_REG_CR_EOI, 0);
+	ia64_srlz_d();
+}
+
+#define cpu_relax()	ia64_hint(ia64_hint_pause)
+
+static inline void
+ia64_set_lrr0 (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_LRR0, val);
+	ia64_srlz_d();
+}
+
+static inline void
+ia64_set_lrr1 (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_LRR1, val);
+	ia64_srlz_d();
+}
+
+
+/*
+ * Given the address to which a spill occurred, return the unat bit
+ * number that corresponds to this address.
+ */
+static inline __u64
+ia64_unat_pos (void *spill_addr)
+{
+	return ((__u64) spill_addr >> 3) & 0x3f;
+}
+
+/*
+ * Set the NaT bit of an integer register which was spilled at address
+ * SPILL_ADDR.  UNAT is the mask to be updated.
+ */
+static inline void
+ia64_set_unat (__u64 *unat, void *spill_addr, unsigned long nat)
+{
+	__u64 bit = ia64_unat_pos(spill_addr);
+	__u64 mask = 1UL << bit;
+
+	*unat = (*unat & ~mask) | (nat << bit);
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ * Note that the only way T can block is through a call to schedule() -> switch_to().
+ */
+static inline unsigned long
+thread_saved_pc (struct task_struct *t)
+{
+	struct unw_frame_info info;
+	unsigned long ip;
+
+	unw_init_from_blocked_task(&info, t);
+	if (unw_unwind(&info) < 0)
+		return 0;
+	unw_get_ip(&info, &ip);
+	return ip;
+}
+
+/*
+ * Get the current instruction/program counter value.
+ */
+#define current_text_addr() \
+	({ void *_pc; _pc = (void *)ia64_getreg(_IA64_REG_IP); _pc; })
+
+static inline __u64
+ia64_get_ivr (void)
+{
+	__u64 r;
+	ia64_srlz_d();
+	r = ia64_getreg(_IA64_REG_CR_IVR);
+	ia64_srlz_d();
+	return r;
+}
+
+static inline void
+ia64_set_dbr (__u64 regnum, __u64 value)
+{
+	__ia64_set_dbr(regnum, value);
+#ifdef CONFIG_ITANIUM
+	ia64_srlz_d();
+#endif
+}
+
+static inline __u64
+ia64_get_dbr (__u64 regnum)
+{
+	__u64 retval;
+
+	retval = __ia64_get_dbr(regnum);
+#ifdef CONFIG_ITANIUM
+	ia64_srlz_d();
+#endif
+	return retval;
+}
+
+static inline __u64
+ia64_rotr (__u64 w, __u64 n)
+{
+	return (w >> n) | (w << (64 - n));
+}
+
+#define ia64_rotl(w,n)	ia64_rotr((w), (64) - (n))
+
+/*
+ * Take a mapped kernel address and return the equivalent address
+ * in the region 7 identity mapped virtual area.
+ */
+static inline void *
+ia64_imva (void *addr)
+{
+	void *result;
+	result = (void *) ia64_tpa(addr);
+	return __va(result);
+}
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+#define PREFETCH_STRIDE			L1_CACHE_BYTES
+
+static inline void
+prefetch (const void *x)
+{
+	 ia64_lfetch(ia64_lfhint_none, x);
+}
+
+static inline void
+prefetchw (const void *x)
+{
+	ia64_lfetch_excl(ia64_lfhint_none, x);
+}
+
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+extern unsigned long boot_option_idle_override;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PROCESSOR_H */
diff --git a/include/asm-ia64/ptrace.h b/include/asm-ia64/ptrace.h
new file mode 100644
index 000000000000..0bef19538406
--- /dev/null
+++ b/include/asm-ia64/ptrace.h
@@ -0,0 +1,337 @@
+#ifndef _ASM_IA64_PTRACE_H
+#define _ASM_IA64_PTRACE_H
+
+/*
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 2003 Intel Co
+ *	Suresh Siddha <suresh.b.siddha@intel.com>
+ *	Fenghua Yu <fenghua.yu@intel.com>
+ *	Arun Sharma <arun.sharma@intel.com>
+ *
+ * 12/07/98	S. Eranian	added pt_regs & switch_stack
+ * 12/21/98	D. Mosberger	updated to match latest code
+ *  6/17/99	D. Mosberger	added second unat member to "struct switch_stack"
+ *
+ */
+/*
+ * When a user process is blocked, its state looks as follows:
+ *
+ *            +----------------------+	-------	IA64_STK_OFFSET
+ *     	      |			     |	 ^
+ *            | struct pt_regs       |	 |
+ *	      |			     |	 |
+ *            +----------------------+	 |
+ *	      |			     |	 |
+ *     	      |	   memory stack	     |	 |
+ *	      |	(growing downwards)  |	 |
+ *	      //.....................//	 |
+ *					 |
+ *	      //.....................//	 |
+ *	      |			     |	 |
+ *            +----------------------+	 |
+ *            | struct switch_stack  |	 |
+ *	      |			     |	 |
+ *	      +----------------------+	 |
+ *	      |			     |	 |
+ *	      //.....................//	 |
+ *					 |
+ *	      //.....................//	 |
+ *	      |			     |	 |
+ *	      |	 register stack	     |	 |
+ *	      |	(growing upwards)    |	 |
+ *            |			     |	 |
+ *	      +----------------------+	 |  ---	IA64_RBS_OFFSET
+ *            |  struct thread_info  |	 |  ^
+ *	      +----------------------+	 |  |
+ *	      |			     |	 |  |
+ *            |  struct task_struct  |	 |  |
+ * current -> |			     |   |  |
+ *	      +----------------------+ -------
+ *
+ * Note that ar.ec is not saved explicitly in pt_reg or switch_stack.
+ * This is because ar.ec is saved as part of ar.pfs.
+ */
+
+#include <linux/config.h>
+
+#include <asm/fpu.h>
+#include <asm/offsets.h>
+
+/*
+ * Base-2 logarithm of number of pages to allocate per task structure
+ * (including register backing store and memory stack):
+ */
+#if defined(CONFIG_IA64_PAGE_SIZE_4KB)
+# define KERNEL_STACK_SIZE_ORDER		3
+#elif defined(CONFIG_IA64_PAGE_SIZE_8KB)
+# define KERNEL_STACK_SIZE_ORDER		2
+#elif defined(CONFIG_IA64_PAGE_SIZE_16KB)
+# define KERNEL_STACK_SIZE_ORDER		1
+#else
+# define KERNEL_STACK_SIZE_ORDER		0
+#endif
+
+#define IA64_RBS_OFFSET			((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 15) & ~15)
+#define IA64_STK_OFFSET			((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE)
+
+#define KERNEL_STACK_SIZE		IA64_STK_OFFSET
+
+#ifndef __ASSEMBLY__
+
+#include <asm/current.h>
+#include <asm/page.h>
+
+/*
+ * This struct defines the way the registers are saved on system
+ * calls.
+ *
+ * We don't save all floating point register because the kernel
+ * is compiled to use only a very small subset, so the other are
+ * untouched.
+ *
+ * THIS STRUCTURE MUST BE A MULTIPLE 16-BYTE IN SIZE
+ * (because the memory stack pointer MUST ALWAYS be aligned this way)
+ *
+ */
+struct pt_regs {
+	/* The following registers are saved by SAVE_MIN: */
+	unsigned long b6;		/* scratch */
+	unsigned long b7;		/* scratch */
+
+	unsigned long ar_csd;           /* used by cmp8xchg16 (scratch) */
+	unsigned long ar_ssd;           /* reserved for future use (scratch) */
+
+	unsigned long r8;		/* scratch (return value register 0) */
+	unsigned long r9;		/* scratch (return value register 1) */
+	unsigned long r10;		/* scratch (return value register 2) */
+	unsigned long r11;		/* scratch (return value register 3) */
+
+	unsigned long cr_ipsr;		/* interrupted task's psr */
+	unsigned long cr_iip;		/* interrupted task's instruction pointer */
+	/*
+	 * interrupted task's function state; if bit 63 is cleared, it
+	 * contains syscall's ar.pfs.pfm:
+	 */
+	unsigned long cr_ifs;
+
+	unsigned long ar_unat;		/* interrupted task's NaT register (preserved) */
+	unsigned long ar_pfs;		/* prev function state  */
+	unsigned long ar_rsc;		/* RSE configuration */
+	/* The following two are valid only if cr_ipsr.cpl > 0: */
+	unsigned long ar_rnat;		/* RSE NaT */
+	unsigned long ar_bspstore;	/* RSE bspstore */
+
+	unsigned long pr;		/* 64 predicate registers (1 bit each) */
+	unsigned long b0;		/* return pointer (bp) */
+	unsigned long loadrs;		/* size of dirty partition << 16 */
+
+	unsigned long r1;		/* the gp pointer */
+	unsigned long r12;		/* interrupted task's memory stack pointer */
+	unsigned long r13;		/* thread pointer */
+
+	unsigned long ar_fpsr;		/* floating point status (preserved) */
+	unsigned long r15;		/* scratch */
+
+	/* The remaining registers are NOT saved for system calls.  */
+
+	unsigned long r14;		/* scratch */
+	unsigned long r2;		/* scratch */
+	unsigned long r3;		/* scratch */
+
+	/* The following registers are saved by SAVE_REST: */
+	unsigned long r16;		/* scratch */
+	unsigned long r17;		/* scratch */
+	unsigned long r18;		/* scratch */
+	unsigned long r19;		/* scratch */
+	unsigned long r20;		/* scratch */
+	unsigned long r21;		/* scratch */
+	unsigned long r22;		/* scratch */
+	unsigned long r23;		/* scratch */
+	unsigned long r24;		/* scratch */
+	unsigned long r25;		/* scratch */
+	unsigned long r26;		/* scratch */
+	unsigned long r27;		/* scratch */
+	unsigned long r28;		/* scratch */
+	unsigned long r29;		/* scratch */
+	unsigned long r30;		/* scratch */
+	unsigned long r31;		/* scratch */
+
+	unsigned long ar_ccv;		/* compare/exchange value (scratch) */
+
+	/*
+	 * Floating point registers that the kernel considers scratch:
+	 */
+	struct ia64_fpreg f6;		/* scratch */
+	struct ia64_fpreg f7;		/* scratch */
+	struct ia64_fpreg f8;		/* scratch */
+	struct ia64_fpreg f9;		/* scratch */
+	struct ia64_fpreg f10;		/* scratch */
+	struct ia64_fpreg f11;		/* scratch */
+};
+
+/*
+ * This structure contains the addition registers that need to
+ * preserved across a context switch.  This generally consists of
+ * "preserved" registers.
+ */
+struct switch_stack {
+	unsigned long caller_unat;	/* user NaT collection register (preserved) */
+	unsigned long ar_fpsr;		/* floating-point status register */
+
+	struct ia64_fpreg f2;		/* preserved */
+	struct ia64_fpreg f3;		/* preserved */
+	struct ia64_fpreg f4;		/* preserved */
+	struct ia64_fpreg f5;		/* preserved */
+
+	struct ia64_fpreg f12;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f13;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f14;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f15;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f16;		/* preserved */
+	struct ia64_fpreg f17;		/* preserved */
+	struct ia64_fpreg f18;		/* preserved */
+	struct ia64_fpreg f19;		/* preserved */
+	struct ia64_fpreg f20;		/* preserved */
+	struct ia64_fpreg f21;		/* preserved */
+	struct ia64_fpreg f22;		/* preserved */
+	struct ia64_fpreg f23;		/* preserved */
+	struct ia64_fpreg f24;		/* preserved */
+	struct ia64_fpreg f25;		/* preserved */
+	struct ia64_fpreg f26;		/* preserved */
+	struct ia64_fpreg f27;		/* preserved */
+	struct ia64_fpreg f28;		/* preserved */
+	struct ia64_fpreg f29;		/* preserved */
+	struct ia64_fpreg f30;		/* preserved */
+	struct ia64_fpreg f31;		/* preserved */
+
+	unsigned long r4;		/* preserved */
+	unsigned long r5;		/* preserved */
+	unsigned long r6;		/* preserved */
+	unsigned long r7;		/* preserved */
+
+	unsigned long b0;		/* so we can force a direct return in copy_thread */
+	unsigned long b1;
+	unsigned long b2;
+	unsigned long b3;
+	unsigned long b4;
+	unsigned long b5;
+
+	unsigned long ar_pfs;		/* previous function state */
+	unsigned long ar_lc;		/* loop counter (preserved) */
+	unsigned long ar_unat;		/* NaT bits for r4-r7 */
+	unsigned long ar_rnat;		/* RSE NaT collection register */
+	unsigned long ar_bspstore;	/* RSE dirty base (preserved) */
+	unsigned long pr;		/* 64 predicate registers (1 bit each) */
+};
+
+#ifdef __KERNEL__
+/*
+ * We use the ia64_psr(regs)->ri to determine which of the three
+ * instructions in bundle (16 bytes) took the sample. Generate
+ * the canonical representation by adding to instruction pointer.
+ */
+# define instruction_pointer(regs) ((regs)->cr_iip + ia64_psr(regs)->ri)
+/* Conserve space in histogram by encoding slot bits in address
+ * bits 2 and 3 rather than bits 0 and 1.
+ */
+#define profile_pc(regs)						\
+({									\
+	unsigned long __ip = instruction_pointer(regs);			\
+	(__ip & ~3UL) + ((__ip & 3UL) << 2);				\
+})
+
+  /* given a pointer to a task_struct, return the user's pt_regs */
+# define ia64_task_regs(t)		(((struct pt_regs *) ((char *) (t) + IA64_STK_OFFSET)) - 1)
+# define ia64_psr(regs)			((struct ia64_psr *) &(regs)->cr_ipsr)
+# define user_mode(regs)		(((struct ia64_psr *) &(regs)->cr_ipsr)->cpl != 0)
+# define user_stack(task,regs)	((long) regs - (long) task == IA64_STK_OFFSET - sizeof(*regs))
+# define fsys_mode(task,regs)					\
+  ({								\
+	  struct task_struct *_task = (task);			\
+	  struct pt_regs *_regs = (regs);			\
+	  !user_mode(_regs) && user_stack(_task, _regs);	\
+  })
+
+  /*
+   * System call handlers that, upon successful completion, need to return a negative value
+   * should call force_successful_syscall_return() right before returning.  On architectures
+   * where the syscall convention provides for a separate error flag (e.g., alpha, ia64,
+   * ppc{,64}, sparc{,64}, possibly others), this macro can be used to ensure that the error
+   * flag will not get set.  On architectures which do not support a separate error flag,
+   * the macro is a no-op and the spurious error condition needs to be filtered out by some
+   * other means (e.g., in user-level, by passing an extra argument to the syscall handler,
+   * or something along those lines).
+   *
+   * On ia64, we can clear the user's pt_regs->r8 to force a successful syscall.
+   */
+# define force_successful_syscall_return()	(ia64_task_regs(current)->r8 = 0)
+
+  struct task_struct;			/* forward decl */
+  struct unw_frame_info;		/* forward decl */
+
+  extern void show_regs (struct pt_regs *);
+  extern void ia64_do_show_stack (struct unw_frame_info *, void *);
+  extern unsigned long ia64_get_user_rbs_end (struct task_struct *, struct pt_regs *,
+					      unsigned long *);
+  extern long ia64_peek (struct task_struct *, struct switch_stack *, unsigned long,
+			 unsigned long, long *);
+  extern long ia64_poke (struct task_struct *, struct switch_stack *, unsigned long,
+			 unsigned long, long);
+  extern void ia64_flush_fph (struct task_struct *);
+  extern void ia64_sync_fph (struct task_struct *);
+  extern long ia64_sync_user_rbs (struct task_struct *, struct switch_stack *,
+				  unsigned long, unsigned long);
+
+  /* get nat bits for scratch registers such that bit N==1 iff scratch register rN is a NaT */
+  extern unsigned long ia64_get_scratch_nat_bits (struct pt_regs *pt, unsigned long scratch_unat);
+  /* put nat bits for scratch registers such that scratch register rN is a NaT iff bit N==1 */
+  extern unsigned long ia64_put_scratch_nat_bits (struct pt_regs *pt, unsigned long nat);
+
+  extern void ia64_increment_ip (struct pt_regs *pt);
+  extern void ia64_decrement_ip (struct pt_regs *pt);
+
+#endif /* !__KERNEL__ */
+
+/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
+struct pt_all_user_regs {
+	unsigned long nat;
+	unsigned long cr_iip;
+	unsigned long cfm;
+	unsigned long cr_ipsr;
+	unsigned long pr;
+
+	unsigned long gr[32];
+	unsigned long br[8];
+	unsigned long ar[128];
+	struct ia64_fpreg fr[128];
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/* indices to application-registers array in pt_all_user_regs */
+#define PT_AUR_RSC	16
+#define PT_AUR_BSP	17
+#define PT_AUR_BSPSTORE	18
+#define PT_AUR_RNAT	19
+#define PT_AUR_CCV	32
+#define PT_AUR_UNAT	36
+#define PT_AUR_FPSR	40
+#define PT_AUR_PFS	64
+#define PT_AUR_LC	65
+#define PT_AUR_EC	66
+
+/*
+ * The numbers chosen here are somewhat arbitrary but absolutely MUST
+ * not overlap with any of the number assigned in <linux/ptrace.h>.
+ */
+#define PTRACE_SINGLEBLOCK	12	/* resume execution until next branch */
+#define PTRACE_OLD_GETSIGINFO	13	/* (replaced by PTRACE_GETSIGINFO in <linux/ptrace.h>)  */
+#define PTRACE_OLD_SETSIGINFO	14	/* (replaced by PTRACE_SETSIGINFO in <linux/ptrace.h>)  */
+#define PTRACE_GETREGS		18	/* get all registers (pt_all_user_regs) in one shot */
+#define PTRACE_SETREGS		19	/* set all registers (pt_all_user_regs) in one shot */
+
+#define PTRACE_OLDSETOPTIONS	21
+
+#endif /* _ASM_IA64_PTRACE_H */
diff --git a/include/asm-ia64/ptrace_offsets.h b/include/asm-ia64/ptrace_offsets.h
new file mode 100644
index 000000000000..b712773c759e
--- /dev/null
+++ b/include/asm-ia64/ptrace_offsets.h
@@ -0,0 +1,268 @@
+#ifndef _ASM_IA64_PTRACE_OFFSETS_H
+#define _ASM_IA64_PTRACE_OFFSETS_H
+
+/*
+ * Copyright (C) 1999, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * The "uarea" that can be accessed via PEEKUSER and POKEUSER is a
+ * virtual structure that would have the following definition:
+ *
+ *	struct uarea {
+ *		struct ia64_fpreg fph[96];		// f32-f127
+ *		unsigned long nat_bits;
+ *		unsigned long empty1;
+ *		struct ia64_fpreg f2;			// f2-f5
+ *			:
+ *		struct ia64_fpreg f5;
+ *		struct ia64_fpreg f10;			// f10-f31
+ *			:
+ *		struct ia64_fpreg f31;
+ *		unsigned long r4;			// r4-r7
+ *			:
+ *		unsigned long r7;
+ *		unsigned long b1;			// b1-b5
+ *			:
+ *		unsigned long b5;
+ *		unsigned long ar_ec;
+ *		unsigned long ar_lc;
+ *		unsigned long empty2[5];
+ *		unsigned long cr_ipsr;
+ *		unsigned long cr_iip;
+ *		unsigned long cfm;
+ *		unsigned long ar_unat;
+ *		unsigned long ar_pfs;
+ *		unsigned long ar_rsc;
+ *		unsigned long ar_rnat;
+ *		unsigned long ar_bspstore;
+ *		unsigned long pr;
+ *		unsigned long b6;
+ *		unsigned long ar_bsp;
+ *		unsigned long r1;
+ *		unsigned long r2;
+ *		unsigned long r3;
+ *		unsigned long r12;
+ *		unsigned long r13;
+ *		unsigned long r14;
+ *		unsigned long r15;
+ *		unsigned long r8;
+ *		unsigned long r9;
+ *		unsigned long r10;
+ *		unsigned long r11;
+ *		unsigned long r16;
+ *			:
+ *		unsigned long r31;
+ *		unsigned long ar_ccv;
+ *		unsigned long ar_fpsr;
+ *		unsigned long b0;
+ *		unsigned long b7;
+ *		unsigned long f6;
+ *		unsigned long f7;
+ *		unsigned long f8;
+ *		unsigned long f9;
+ *		unsigned long ar_csd;
+ *		unsigned long ar_ssd;
+ *		unsigned long rsvd1[710];
+ *		unsigned long dbr[8];
+ *		unsigned long rsvd2[504];
+ *		unsigned long ibr[8];
+ *		unsigned long rsvd3[504];
+ *		unsigned long pmd[4];
+ *	}
+ */
+
+/* fph: */
+#define PT_F32			0x0000
+#define PT_F33			0x0010
+#define PT_F34			0x0020
+#define PT_F35			0x0030
+#define PT_F36			0x0040
+#define PT_F37			0x0050
+#define PT_F38			0x0060
+#define PT_F39			0x0070
+#define PT_F40			0x0080
+#define PT_F41			0x0090
+#define PT_F42			0x00a0
+#define PT_F43			0x00b0
+#define PT_F44			0x00c0
+#define PT_F45			0x00d0
+#define PT_F46			0x00e0
+#define PT_F47			0x00f0
+#define PT_F48			0x0100
+#define PT_F49			0x0110
+#define PT_F50			0x0120
+#define PT_F51			0x0130
+#define PT_F52			0x0140
+#define PT_F53			0x0150
+#define PT_F54			0x0160
+#define PT_F55			0x0170
+#define PT_F56			0x0180
+#define PT_F57			0x0190
+#define PT_F58			0x01a0
+#define PT_F59			0x01b0
+#define PT_F60			0x01c0
+#define PT_F61			0x01d0
+#define PT_F62			0x01e0
+#define PT_F63			0x01f0
+#define PT_F64			0x0200
+#define PT_F65			0x0210
+#define PT_F66			0x0220
+#define PT_F67			0x0230
+#define PT_F68			0x0240
+#define PT_F69			0x0250
+#define PT_F70			0x0260
+#define PT_F71			0x0270
+#define PT_F72			0x0280
+#define PT_F73			0x0290
+#define PT_F74			0x02a0
+#define PT_F75			0x02b0
+#define PT_F76			0x02c0
+#define PT_F77			0x02d0
+#define PT_F78			0x02e0
+#define PT_F79			0x02f0
+#define PT_F80			0x0300
+#define PT_F81			0x0310
+#define PT_F82			0x0320
+#define PT_F83			0x0330
+#define PT_F84			0x0340
+#define PT_F85			0x0350
+#define PT_F86			0x0360
+#define PT_F87			0x0370
+#define PT_F88			0x0380
+#define PT_F89			0x0390
+#define PT_F90			0x03a0
+#define PT_F91			0x03b0
+#define PT_F92			0x03c0
+#define PT_F93			0x03d0
+#define PT_F94			0x03e0
+#define PT_F95			0x03f0
+#define PT_F96			0x0400
+#define PT_F97			0x0410
+#define PT_F98			0x0420
+#define PT_F99			0x0430
+#define PT_F100			0x0440
+#define PT_F101			0x0450
+#define PT_F102			0x0460
+#define PT_F103			0x0470
+#define PT_F104			0x0480
+#define PT_F105			0x0490
+#define PT_F106			0x04a0
+#define PT_F107			0x04b0
+#define PT_F108			0x04c0
+#define PT_F109			0x04d0
+#define PT_F110			0x04e0
+#define PT_F111			0x04f0
+#define PT_F112			0x0500
+#define PT_F113			0x0510
+#define PT_F114			0x0520
+#define PT_F115			0x0530
+#define PT_F116			0x0540
+#define PT_F117			0x0550
+#define PT_F118			0x0560
+#define PT_F119			0x0570
+#define PT_F120			0x0580
+#define PT_F121			0x0590
+#define PT_F122			0x05a0
+#define PT_F123			0x05b0
+#define PT_F124			0x05c0
+#define PT_F125			0x05d0
+#define PT_F126			0x05e0
+#define PT_F127			0x05f0
+
+#define PT_NAT_BITS		0x0600
+
+#define PT_F2			0x0610
+#define PT_F3			0x0620
+#define PT_F4			0x0630
+#define PT_F5			0x0640
+#define PT_F10			0x0650
+#define PT_F11			0x0660
+#define PT_F12			0x0670
+#define PT_F13			0x0680
+#define PT_F14			0x0690
+#define PT_F15			0x06a0
+#define PT_F16			0x06b0
+#define PT_F17			0x06c0
+#define PT_F18			0x06d0
+#define PT_F19			0x06e0
+#define PT_F20			0x06f0
+#define PT_F21			0x0700
+#define PT_F22			0x0710
+#define PT_F23			0x0720
+#define PT_F24			0x0730
+#define PT_F25			0x0740
+#define PT_F26			0x0750
+#define PT_F27			0x0760
+#define PT_F28			0x0770
+#define PT_F29			0x0780
+#define PT_F30			0x0790
+#define PT_F31			0x07a0
+#define PT_R4			0x07b0
+#define PT_R5			0x07b8
+#define PT_R6			0x07c0
+#define PT_R7			0x07c8
+
+#define PT_B1			0x07d8
+#define PT_B2			0x07e0
+#define PT_B3			0x07e8
+#define PT_B4			0x07f0
+#define PT_B5			0x07f8
+
+#define PT_AR_EC		0x0800
+#define PT_AR_LC		0x0808
+
+#define PT_CR_IPSR		0x0830
+#define PT_CR_IIP		0x0838
+#define PT_CFM			0x0840
+#define PT_AR_UNAT		0x0848
+#define PT_AR_PFS		0x0850
+#define PT_AR_RSC		0x0858
+#define PT_AR_RNAT		0x0860
+#define PT_AR_BSPSTORE		0x0868
+#define PT_PR			0x0870
+#define PT_B6			0x0878
+#define PT_AR_BSP		0x0880	/* note: this points to the *end* of the backing store! */
+#define PT_R1			0x0888
+#define PT_R2			0x0890
+#define PT_R3			0x0898
+#define PT_R12			0x08a0
+#define PT_R13			0x08a8
+#define PT_R14			0x08b0
+#define PT_R15			0x08b8
+#define PT_R8 			0x08c0
+#define PT_R9			0x08c8
+#define PT_R10			0x08d0
+#define PT_R11			0x08d8
+#define PT_R16			0x08e0
+#define PT_R17			0x08e8
+#define PT_R18			0x08f0
+#define PT_R19			0x08f8
+#define PT_R20			0x0900
+#define PT_R21			0x0908
+#define PT_R22			0x0910
+#define PT_R23			0x0918
+#define PT_R24			0x0920
+#define PT_R25			0x0928
+#define PT_R26			0x0930
+#define PT_R27			0x0938
+#define PT_R28			0x0940
+#define PT_R29			0x0948
+#define PT_R30			0x0950
+#define PT_R31			0x0958
+#define PT_AR_CCV		0x0960
+#define PT_AR_FPSR		0x0968
+#define PT_B0			0x0970
+#define PT_B7			0x0978
+#define PT_F6			0x0980
+#define PT_F7			0x0990
+#define PT_F8			0x09a0
+#define PT_F9			0x09b0
+#define PT_AR_CSD		0x09c0
+#define PT_AR_SSD		0x09c8
+
+#define PT_DBR			0x2000	/* data breakpoint registers */
+#define PT_IBR			0x3000	/* instruction breakpoint registers */
+#define PT_PMD			0x4000	/* performance monitoring counters */
+
+#endif /* _ASM_IA64_PTRACE_OFFSETS_H */
diff --git a/include/asm-ia64/resource.h b/include/asm-ia64/resource.h
new file mode 100644
index 000000000000..77b1eee01f30
--- /dev/null
+++ b/include/asm-ia64/resource.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_IA64_RESOURCE_H
+#define _ASM_IA64_RESOURCE_H
+
+#include <asm/ustack.h>
+#define _STK_LIM_MAX	DEFAULT_USER_STACK_SIZE
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_IA64_RESOURCE_H */
diff --git a/include/asm-ia64/rse.h b/include/asm-ia64/rse.h
new file mode 100644
index 000000000000..02830a3b0196
--- /dev/null
+++ b/include/asm-ia64/rse.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_IA64_RSE_H
+#define _ASM_IA64_RSE_H
+
+/*
+ * Copyright (C) 1998, 1999 Hewlett-Packard Co
+ * Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * Register stack engine related helper functions.  This file may be
+ * used in applications, so be careful about the name-space and give
+ * some consideration to non-GNU C compilers (though __inline__ is
+ * fine).
+ */
+
+static __inline__ unsigned long
+ia64_rse_slot_num (unsigned long *addr)
+{
+	return (((unsigned long) addr) >> 3) & 0x3f;
+}
+
+/*
+ * Return TRUE if ADDR is the address of an RNAT slot.
+ */
+static __inline__ unsigned long
+ia64_rse_is_rnat_slot (unsigned long *addr)
+{
+	return ia64_rse_slot_num(addr) == 0x3f;
+}
+
+/*
+ * Returns the address of the RNAT slot that covers the slot at
+ * address SLOT_ADDR.
+ */
+static __inline__ unsigned long *
+ia64_rse_rnat_addr (unsigned long *slot_addr)
+{
+	return (unsigned long *) ((unsigned long) slot_addr | (0x3f << 3));
+}
+
+/*
+ * Calculate the number of registers in the dirty partition starting at BSPSTORE and
+ * ending at BSP.  This isn't simply (BSP-BSPSTORE)/8 because every 64th slot stores
+ * ar.rnat.
+ */
+static __inline__ unsigned long
+ia64_rse_num_regs (unsigned long *bspstore, unsigned long *bsp)
+{
+	unsigned long slots = (bsp - bspstore);
+
+	return slots - (ia64_rse_slot_num(bspstore) + slots)/0x40;
+}
+
+/*
+ * The inverse of the above: given bspstore and the number of
+ * registers, calculate ar.bsp.
+ */
+static __inline__ unsigned long *
+ia64_rse_skip_regs (unsigned long *addr, long num_regs)
+{
+	long delta = ia64_rse_slot_num(addr) + num_regs;
+
+	if (num_regs < 0)
+		delta -= 0x3e;
+	return addr + num_regs + delta/0x3f;
+}
+
+#endif /* _ASM_IA64_RSE_H */
diff --git a/include/asm-ia64/rwsem.h b/include/asm-ia64/rwsem.h
new file mode 100644
index 000000000000..6ece5061dc19
--- /dev/null
+++ b/include/asm-ia64/rwsem.h
@@ -0,0 +1,188 @@
+/*
+ * asm-ia64/rwsem.h: R/W semaphores for ia64
+ *
+ * Copyright (C) 2003 Ken Chen <kenneth.w.chen@intel.com>
+ * Copyright (C) 2003 Asit Mallick <asit.k.mallick@intel.com>
+ *
+ * Based on asm-i386/rwsem.h and other architecture implementation.
+ *
+ * The MSW of the count is the negated number of active writers and
+ * waiting lockers, and the LSW is the total number of active locks.
+ *
+ * The lock count is initialized to 0 (no active and no waiting lockers).
+ *
+ * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case
+ * of an uncontended lock. Readers increment by 1 and see a positive value
+ * when uncontended, negative if there are writers (and maybe) readers
+ * waiting (in which case it goes to sleep).
+ */
+
+#ifndef _ASM_IA64_RWSEM_H
+#define _ASM_IA64_RWSEM_H
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+#include <asm/intrinsics.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	signed int		count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#if RWSEM_DEBUG
+	int			debug;
+#endif
+};
+
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+/*
+ * initialization
+ */
+#if RWSEM_DEBUG
+#define __RWSEM_DEBUG_INIT      , 0
+#else
+#define __RWSEM_DEBUG_INIT	/* */
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	  LIST_HEAD_INIT((name).wait_list) \
+	  __RWSEM_DEBUG_INIT }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+static inline void
+init_rwsem (struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+#if RWSEM_DEBUG
+	sem->debug = 0;
+#endif
+}
+
+/*
+ * lock for reading
+ */
+static inline void
+__down_read (struct rw_semaphore *sem)
+{
+	int result = ia64_fetchadd4_acq((unsigned int *)&sem->count, 1);
+
+	if (result < 0)
+		rwsem_down_read_failed(sem);
+}
+
+/*
+ * lock for writing
+ */
+static inline void
+__down_write (struct rw_semaphore *sem)
+{
+	int old, new;
+
+	do {
+		old = sem->count;
+		new = old + RWSEM_ACTIVE_WRITE_BIAS;
+	} while (cmpxchg_acq(&sem->count, old, new) != old);
+
+	if (old != 0)
+		rwsem_down_write_failed(sem);
+}
+
+/*
+ * unlock after reading
+ */
+static inline void
+__up_read (struct rw_semaphore *sem)
+{
+	int result = ia64_fetchadd4_rel((unsigned int *)&sem->count, -1);
+
+	if (result < 0 && (--result & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void
+__up_write (struct rw_semaphore *sem)
+{
+	int old, new;
+
+	do {
+		old = sem->count;
+		new = old - RWSEM_ACTIVE_WRITE_BIAS;
+	} while (cmpxchg_rel(&sem->count, old, new) != old);
+
+	if (new < 0 && (new & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int
+__down_read_trylock (struct rw_semaphore *sem)
+{
+	int tmp;
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg_acq(&sem->count, tmp, tmp+1)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int
+__down_write_trylock (struct rw_semaphore *sem)
+{
+	int tmp = cmpxchg_acq(&sem->count, RWSEM_UNLOCKED_VALUE,
+			      RWSEM_ACTIVE_WRITE_BIAS);
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void
+__downgrade_write (struct rw_semaphore *sem)
+{
+	int old, new;
+
+	do {
+		old = sem->count;
+		new = old - RWSEM_WAITING_BIAS;
+	} while (cmpxchg_rel(&sem->count, old, new) != old);
+
+	if (old < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * Implement atomic add functionality.  These used to be "inline" functions, but GCC v3.1
+ * doesn't quite optimize this stuff right and ends up with bad calls to fetchandadd.
+ */
+#define rwsem_atomic_add(delta, sem)	atomic_add(delta, (atomic_t *)(&(sem)->count))
+#define rwsem_atomic_update(delta, sem)	atomic_add_return(delta, (atomic_t *)(&(sem)->count))
+
+#endif /* _ASM_IA64_RWSEM_H */
diff --git a/include/asm-ia64/sal.h b/include/asm-ia64/sal.h
new file mode 100644
index 000000000000..ea1ed377de4c
--- /dev/null
+++ b/include/asm-ia64/sal.h
@@ -0,0 +1,840 @@
+#ifndef _ASM_IA64_SAL_H
+#define _ASM_IA64_SAL_H
+
+/*
+ * System Abstraction Layer definitions.
+ *
+ * This is based on version 2.5 of the manual "IA-64 System
+ * Abstraction Layer".
+ *
+ * Copyright (C) 2001 Intel
+ * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
+ * Copyright (C) 2001 Fred Lewis <frederick.v.lewis@intel.com>
+ * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
+ *
+ * 02/01/04 J. Hall Updated Error Record Structures to conform to July 2001
+ *		    revision of the SAL spec.
+ * 01/01/03 fvlewis Updated Error Record Structures to conform with Nov. 2000
+ *                  revision of the SAL spec.
+ * 99/09/29 davidm	Updated for SAL 2.6.
+ * 00/03/29 cfleck      Updated SAL Error Logging info for processor (SAL 2.6)
+ *                      (plus examples of platform error info structures from smariset @ Intel)
+ */
+
+#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT		0
+#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT	1
+#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT	2
+#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT	 	3
+
+#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK	  (1<<IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT (1<<IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT (1<<IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT	  (1<<IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bcd.h>
+#include <linux/spinlock.h>
+#include <linux/efi.h>
+
+#include <asm/pal.h>
+#include <asm/system.h>
+#include <asm/fpu.h>
+
+extern spinlock_t sal_lock;
+
+/* SAL spec _requires_ eight args for each call. */
+#define __SAL_CALL(result,a0,a1,a2,a3,a4,a5,a6,a7)	\
+	result = (*ia64_sal)(a0,a1,a2,a3,a4,a5,a6,a7)
+
+# define SAL_CALL(result,args...) do {				\
+	unsigned long __ia64_sc_flags;				\
+	struct ia64_fpreg __ia64_sc_fr[6];			\
+	ia64_save_scratch_fpregs(__ia64_sc_fr);			\
+	spin_lock_irqsave(&sal_lock, __ia64_sc_flags);		\
+	__SAL_CALL(result, args);				\
+	spin_unlock_irqrestore(&sal_lock, __ia64_sc_flags);	\
+	ia64_load_scratch_fpregs(__ia64_sc_fr);			\
+} while (0)
+
+# define SAL_CALL_NOLOCK(result,args...) do {		\
+	unsigned long __ia64_scn_flags;			\
+	struct ia64_fpreg __ia64_scn_fr[6];		\
+	ia64_save_scratch_fpregs(__ia64_scn_fr);	\
+	local_irq_save(__ia64_scn_flags);		\
+	__SAL_CALL(result, args);			\
+	local_irq_restore(__ia64_scn_flags);		\
+	ia64_load_scratch_fpregs(__ia64_scn_fr);	\
+} while (0)
+
+# define SAL_CALL_REENTRANT(result,args...) do {	\
+	struct ia64_fpreg __ia64_scs_fr[6];		\
+	ia64_save_scratch_fpregs(__ia64_scs_fr);	\
+	preempt_disable();				\
+	__SAL_CALL(result, args);			\
+	preempt_enable();				\
+	ia64_load_scratch_fpregs(__ia64_scs_fr);	\
+} while (0)
+
+#define SAL_SET_VECTORS			0x01000000
+#define SAL_GET_STATE_INFO		0x01000001
+#define SAL_GET_STATE_INFO_SIZE		0x01000002
+#define SAL_CLEAR_STATE_INFO		0x01000003
+#define SAL_MC_RENDEZ			0x01000004
+#define SAL_MC_SET_PARAMS		0x01000005
+#define SAL_REGISTER_PHYSICAL_ADDR	0x01000006
+
+#define SAL_CACHE_FLUSH			0x01000008
+#define SAL_CACHE_INIT			0x01000009
+#define SAL_PCI_CONFIG_READ		0x01000010
+#define SAL_PCI_CONFIG_WRITE		0x01000011
+#define SAL_FREQ_BASE			0x01000012
+
+#define SAL_UPDATE_PAL			0x01000020
+
+struct ia64_sal_retval {
+	/*
+	 * A zero status value indicates call completed without error.
+	 * A negative status value indicates reason of call failure.
+	 * A positive status value indicates success but an
+	 * informational value should be printed (e.g., "reboot for
+	 * change to take effect").
+	 */
+	s64 status;
+	u64 v0;
+	u64 v1;
+	u64 v2;
+};
+
+typedef struct ia64_sal_retval (*ia64_sal_handler) (u64, ...);
+
+enum {
+	SAL_FREQ_BASE_PLATFORM = 0,
+	SAL_FREQ_BASE_INTERVAL_TIMER = 1,
+	SAL_FREQ_BASE_REALTIME_CLOCK = 2
+};
+
+/*
+ * The SAL system table is followed by a variable number of variable
+ * length descriptors.  The structure of these descriptors follows
+ * below.
+ * The defininition follows SAL specs from July 2000
+ */
+struct ia64_sal_systab {
+	u8 signature[4];	/* should be "SST_" */
+	u32 size;		/* size of this table in bytes */
+	u8 sal_rev_minor;
+	u8 sal_rev_major;
+	u16 entry_count;	/* # of entries in variable portion */
+	u8 checksum;
+	u8 reserved1[7];
+	u8 sal_a_rev_minor;
+	u8 sal_a_rev_major;
+	u8 sal_b_rev_minor;
+	u8 sal_b_rev_major;
+	/* oem_id & product_id: terminating NUL is missing if string is exactly 32 bytes long. */
+	u8 oem_id[32];
+	u8 product_id[32];	/* ASCII product id  */
+	u8 reserved2[8];
+};
+
+enum sal_systab_entry_type {
+	SAL_DESC_ENTRY_POINT = 0,
+	SAL_DESC_MEMORY = 1,
+	SAL_DESC_PLATFORM_FEATURE = 2,
+	SAL_DESC_TR = 3,
+	SAL_DESC_PTC = 4,
+	SAL_DESC_AP_WAKEUP = 5
+};
+
+/*
+ * Entry type:	Size:
+ *	0	48
+ *	1	32
+ *	2	16
+ *	3	32
+ *	4	16
+ *	5	16
+ */
+#define SAL_DESC_SIZE(type)	"\060\040\020\040\020\020"[(unsigned) type]
+
+typedef struct ia64_sal_desc_entry_point {
+	u8 type;
+	u8 reserved1[7];
+	u64 pal_proc;
+	u64 sal_proc;
+	u64 gp;
+	u8 reserved2[16];
+}ia64_sal_desc_entry_point_t;
+
+typedef struct ia64_sal_desc_memory {
+	u8 type;
+	u8 used_by_sal;	/* needs to be mapped for SAL? */
+	u8 mem_attr;		/* current memory attribute setting */
+	u8 access_rights;	/* access rights set up by SAL */
+	u8 mem_attr_mask;	/* mask of supported memory attributes */
+	u8 reserved1;
+	u8 mem_type;		/* memory type */
+	u8 mem_usage;		/* memory usage */
+	u64 addr;		/* physical address of memory */
+	u32 length;	/* length (multiple of 4KB pages) */
+	u32 reserved2;
+	u8 oem_reserved[8];
+} ia64_sal_desc_memory_t;
+
+typedef struct ia64_sal_desc_platform_feature {
+	u8 type;
+	u8 feature_mask;
+	u8 reserved1[14];
+} ia64_sal_desc_platform_feature_t;
+
+typedef struct ia64_sal_desc_tr {
+	u8 type;
+	u8 tr_type;		/* 0 == instruction, 1 == data */
+	u8 regnum;		/* translation register number */
+	u8 reserved1[5];
+	u64 addr;		/* virtual address of area covered */
+	u64 page_size;		/* encoded page size */
+	u8 reserved2[8];
+} ia64_sal_desc_tr_t;
+
+typedef struct ia64_sal_desc_ptc {
+	u8 type;
+	u8 reserved1[3];
+	u32 num_domains;	/* # of coherence domains */
+	u64 domain_info;	/* physical address of domain info table */
+} ia64_sal_desc_ptc_t;
+
+typedef struct ia64_sal_ptc_domain_info {
+	u64 proc_count;		/* number of processors in domain */
+	u64 proc_list;		/* physical address of LID array */
+} ia64_sal_ptc_domain_info_t;
+
+typedef struct ia64_sal_ptc_domain_proc_entry {
+	u64 id  : 8;		/* id of processor */
+	u64 eid : 8;		/* eid of processor */
+} ia64_sal_ptc_domain_proc_entry_t;
+
+
+#define IA64_SAL_AP_EXTERNAL_INT 0
+
+typedef struct ia64_sal_desc_ap_wakeup {
+	u8 type;
+	u8 mechanism;		/* 0 == external interrupt */
+	u8 reserved1[6];
+	u64 vector;		/* interrupt vector in range 0x10-0xff */
+} ia64_sal_desc_ap_wakeup_t ;
+
+extern ia64_sal_handler ia64_sal;
+extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info;
+
+extern unsigned short sal_revision;	/* supported SAL spec revision */
+extern unsigned short sal_version;	/* SAL version; OEM dependent */
+#define SAL_VERSION_CODE(major, minor) ((BIN2BCD(major) << 8) | BIN2BCD(minor))
+
+extern const char *ia64_sal_strerror (long status);
+extern void ia64_sal_init (struct ia64_sal_systab *sal_systab);
+
+/* SAL information type encodings */
+enum {
+	SAL_INFO_TYPE_MCA  = 0,		/* Machine check abort information */
+        SAL_INFO_TYPE_INIT = 1,		/* Init information */
+        SAL_INFO_TYPE_CMC  = 2,		/* Corrected machine check information */
+        SAL_INFO_TYPE_CPE  = 3		/* Corrected platform error information */
+};
+
+/* Encodings for machine check parameter types */
+enum {
+	SAL_MC_PARAM_RENDEZ_INT    = 1,	/* Rendezvous interrupt */
+	SAL_MC_PARAM_RENDEZ_WAKEUP = 2,	/* Wakeup */
+	SAL_MC_PARAM_CPE_INT	   = 3	/* Corrected Platform Error Int */
+};
+
+/* Encodings for rendezvous mechanisms */
+enum {
+	SAL_MC_PARAM_MECHANISM_INT = 1,	/* Use interrupt */
+	SAL_MC_PARAM_MECHANISM_MEM = 2	/* Use memory synchronization variable*/
+};
+
+/* Encodings for vectors which can be registered by the OS with SAL */
+enum {
+	SAL_VECTOR_OS_MCA	  = 0,
+	SAL_VECTOR_OS_INIT	  = 1,
+	SAL_VECTOR_OS_BOOT_RENDEZ = 2
+};
+
+/* Encodings for mca_opt parameter sent to SAL_MC_SET_PARAMS */
+#define	SAL_MC_PARAM_RZ_ALWAYS		0x1
+#define	SAL_MC_PARAM_BINIT_ESCALATE	0x10
+
+/*
+ * Definition of the SAL Error Log from the SAL spec
+ */
+
+/* SAL Error Record Section GUID Definitions */
+#define SAL_PROC_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf1, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_MEM_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf2, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SEL_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf3, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_PCI_BUS_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf4, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SMBIOS_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf5, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_PCI_COMP_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf6, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SPECIFIC_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf7, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_HOST_CTLR_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf8, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_BUS_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf9, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+
+#define MAX_CACHE_ERRORS	6
+#define MAX_TLB_ERRORS		6
+#define MAX_BUS_ERRORS		1
+
+/* Definition of version  according to SAL spec for logging purposes */
+typedef struct sal_log_revision {
+	u8 minor;		/* BCD (0..99) */
+	u8 major;		/* BCD (0..99) */
+} sal_log_revision_t;
+
+/* Definition of timestamp according to SAL spec for logging purposes */
+typedef struct sal_log_timestamp {
+	u8 slh_second;		/* Second (0..59) */
+	u8 slh_minute;		/* Minute (0..59) */
+	u8 slh_hour;		/* Hour (0..23) */
+	u8 slh_reserved;
+	u8 slh_day;		/* Day (1..31) */
+	u8 slh_month;		/* Month (1..12) */
+	u8 slh_year;		/* Year (00..99) */
+	u8 slh_century;		/* Century (19, 20, 21, ...) */
+} sal_log_timestamp_t;
+
+/* Definition of log record  header structures */
+typedef struct sal_log_record_header {
+	u64 id;				/* Unique monotonically increasing ID */
+	sal_log_revision_t revision;	/* Major and Minor revision of header */
+	u16 severity;			/* Error Severity */
+	u32 len;			/* Length of this error log in bytes */
+	sal_log_timestamp_t timestamp;	/* Timestamp */
+	efi_guid_t platform_guid;	/* Unique OEM Platform ID */
+} sal_log_record_header_t;
+
+#define sal_log_severity_recoverable	0
+#define sal_log_severity_fatal		1
+#define sal_log_severity_corrected	2
+
+/* Definition of log section header structures */
+typedef struct sal_log_sec_header {
+    efi_guid_t guid;			/* Unique Section ID */
+    sal_log_revision_t revision;	/* Major and Minor revision of Section */
+    u16 reserved;
+    u32 len;				/* Section length */
+} sal_log_section_hdr_t;
+
+typedef struct sal_log_mod_error_info {
+	struct {
+		u64 check_info              : 1,
+		    requestor_identifier    : 1,
+		    responder_identifier    : 1,
+		    target_identifier       : 1,
+		    precise_ip              : 1,
+		    reserved                : 59;
+	} valid;
+	u64 check_info;
+	u64 requestor_identifier;
+	u64 responder_identifier;
+	u64 target_identifier;
+	u64 precise_ip;
+} sal_log_mod_error_info_t;
+
+typedef struct sal_processor_static_info {
+	struct {
+		u64 minstate        : 1,
+		    br              : 1,
+		    cr              : 1,
+		    ar              : 1,
+		    rr              : 1,
+		    fr              : 1,
+		    reserved        : 58;
+	} valid;
+	pal_min_state_area_t min_state_area;
+	u64 br[8];
+	u64 cr[128];
+	u64 ar[128];
+	u64 rr[8];
+	struct ia64_fpreg __attribute__ ((packed)) fr[128];
+} sal_processor_static_info_t;
+
+struct sal_cpuid_info {
+	u64 regs[5];
+	u64 reserved;
+};
+
+typedef struct sal_log_processor_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 proc_error_map      : 1,
+		    proc_state_param    : 1,
+		    proc_cr_lid         : 1,
+		    psi_static_struct   : 1,
+		    num_cache_check     : 4,
+		    num_tlb_check       : 4,
+		    num_bus_check       : 4,
+		    num_reg_file_check  : 4,
+		    num_ms_check        : 4,
+		    cpuid_info          : 1,
+		    reserved1           : 39;
+	} valid;
+	u64 proc_error_map;
+	u64 proc_state_parameter;
+	u64 proc_cr_lid;
+	/*
+	 * The rest of this structure consists of variable-length arrays, which can't be
+	 * expressed in C.
+	 */
+	sal_log_mod_error_info_t info[0];
+	/*
+	 * This is what the rest looked like if C supported variable-length arrays:
+	 *
+	 * sal_log_mod_error_info_t cache_check_info[.valid.num_cache_check];
+	 * sal_log_mod_error_info_t tlb_check_info[.valid.num_tlb_check];
+	 * sal_log_mod_error_info_t bus_check_info[.valid.num_bus_check];
+	 * sal_log_mod_error_info_t reg_file_check_info[.valid.num_reg_file_check];
+	 * sal_log_mod_error_info_t ms_check_info[.valid.num_ms_check];
+	 * struct sal_cpuid_info cpuid_info;
+	 * sal_processor_static_info_t processor_static_info;
+	 */
+} sal_log_processor_info_t;
+
+/* Given a sal_log_processor_info_t pointer, return a pointer to the processor_static_info: */
+#define SAL_LPI_PSI_INFO(l)									\
+({	sal_log_processor_info_t *_l = (l);							\
+	((sal_processor_static_info_t *)							\
+	 ((char *) _l->info + ((_l->valid.num_cache_check + _l->valid.num_tlb_check		\
+				+ _l->valid.num_bus_check + _l->valid.num_reg_file_check	\
+				+ _l->valid.num_ms_check) * sizeof(sal_log_mod_error_info_t)	\
+			       + sizeof(struct sal_cpuid_info))));				\
+})
+
+/* platform error log structures */
+
+typedef struct sal_log_mem_dev_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 error_status    : 1,
+		    physical_addr   : 1,
+		    addr_mask       : 1,
+		    node            : 1,
+		    card            : 1,
+		    module          : 1,
+		    bank            : 1,
+		    device          : 1,
+		    row             : 1,
+		    column          : 1,
+		    bit_position    : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    bus_spec_data   : 1,
+		    oem_id          : 1,
+		    oem_data        : 1,
+		    reserved        : 47;
+	} valid;
+	u64 error_status;
+	u64 physical_addr;
+	u64 addr_mask;
+	u16 node;
+	u16 card;
+	u16 module;
+	u16 bank;
+	u16 device;
+	u16 row;
+	u16 column;
+	u16 bit_position;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u64 bus_spec_data;
+	u8 oem_id[16];
+	u8 oem_data[1];			/* Variable length data */
+} sal_log_mem_dev_err_info_t;
+
+typedef struct sal_log_sel_dev_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 record_id       : 1,
+		    record_type     : 1,
+		    generator_id    : 1,
+		    evm_rev         : 1,
+		    sensor_type     : 1,
+		    sensor_num      : 1,
+		    event_dir       : 1,
+		    event_data1     : 1,
+		    event_data2     : 1,
+		    event_data3     : 1,
+		    reserved        : 54;
+	} valid;
+	u16 record_id;
+	u8 record_type;
+	u8 timestamp[4];
+	u16 generator_id;
+	u8 evm_rev;
+	u8 sensor_type;
+	u8 sensor_num;
+	u8 event_dir;
+	u8 event_data1;
+	u8 event_data2;
+	u8 event_data3;
+} sal_log_sel_dev_err_info_t;
+
+typedef struct sal_log_pci_bus_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    err_type        : 1,
+		    bus_id          : 1,
+		    bus_address     : 1,
+		    bus_data        : 1,
+		    bus_cmd         : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    oem_data        : 1,
+		    reserved        : 54;
+	} valid;
+	u64 err_status;
+	u16 err_type;
+	u16 bus_id;
+	u32 reserved;
+	u64 bus_address;
+	u64 bus_data;
+	u64 bus_cmd;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u8 oem_data[1];			/* Variable length data */
+} sal_log_pci_bus_err_info_t;
+
+typedef struct sal_log_smbios_dev_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 event_type      : 1,
+		    length          : 1,
+		    time_stamp      : 1,
+		    data            : 1,
+		    reserved1       : 60;
+	} valid;
+	u8 event_type;
+	u8 length;
+	u8 time_stamp[6];
+	u8 data[1];			/* data of variable length, length == slsmb_length */
+} sal_log_smbios_dev_err_info_t;
+
+typedef struct sal_log_pci_comp_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    comp_info       : 1,
+		    num_mem_regs    : 1,
+		    num_io_regs     : 1,
+		    reg_data_pairs  : 1,
+		    oem_data        : 1,
+		    reserved        : 58;
+	} valid;
+	u64 err_status;
+	struct {
+		u16 vendor_id;
+		u16 device_id;
+		u8 class_code[3];
+		u8 func_num;
+		u8 dev_num;
+		u8 bus_num;
+		u8 seg_num;
+		u8 reserved[5];
+	} comp_info;
+	u32 num_mem_regs;
+	u32 num_io_regs;
+	u64 reg_data_pairs[1];
+	/*
+	 * array of address/data register pairs is num_mem_regs + num_io_regs elements
+	 * long.  Each array element consists of a u64 address followed by a u64 data
+	 * value.  The oem_data array immediately follows the reg_data_pairs array
+	 */
+	u8 oem_data[1];			/* Variable length data */
+} sal_log_pci_comp_err_info_t;
+
+typedef struct sal_log_plat_specific_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    guid            : 1,
+		    oem_data        : 1,
+		    reserved        : 61;
+	} valid;
+	u64 err_status;
+	efi_guid_t guid;
+	u8 oem_data[1];			/* platform specific variable length data */
+} sal_log_plat_specific_err_info_t;
+
+typedef struct sal_log_host_ctlr_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    bus_spec_data   : 1,
+		    oem_data        : 1,
+		    reserved        : 58;
+	} valid;
+	u64 err_status;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u64 bus_spec_data;
+	u8 oem_data[1];			/* Variable length OEM data */
+} sal_log_host_ctlr_err_info_t;
+
+typedef struct sal_log_plat_bus_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    bus_spec_data   : 1,
+		    oem_data        : 1,
+		    reserved        : 58;
+	} valid;
+	u64 err_status;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u64 bus_spec_data;
+	u8 oem_data[1];			/* Variable length OEM data */
+} sal_log_plat_bus_err_info_t;
+
+/* Overall platform error section structure */
+typedef union sal_log_platform_err_info {
+	sal_log_mem_dev_err_info_t mem_dev_err;
+	sal_log_sel_dev_err_info_t sel_dev_err;
+	sal_log_pci_bus_err_info_t pci_bus_err;
+	sal_log_smbios_dev_err_info_t smbios_dev_err;
+	sal_log_pci_comp_err_info_t pci_comp_err;
+	sal_log_plat_specific_err_info_t plat_specific_err;
+	sal_log_host_ctlr_err_info_t host_ctlr_err;
+	sal_log_plat_bus_err_info_t plat_bus_err;
+} sal_log_platform_err_info_t;
+
+/* SAL log over-all, multi-section error record structure (processor+platform) */
+typedef struct err_rec {
+	sal_log_record_header_t sal_elog_header;
+	sal_log_processor_info_t proc_err;
+	sal_log_platform_err_info_t plat_err;
+	u8 oem_data_pad[1024];
+} ia64_err_rec_t;
+
+/*
+ * Now define a couple of inline functions for improved type checking
+ * and convenience.
+ */
+static inline long
+ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second,
+		    unsigned long *drift_info)
+{
+	struct ia64_sal_retval isrv;
+
+	SAL_CALL(isrv, SAL_FREQ_BASE, which, 0, 0, 0, 0, 0, 0);
+	*ticks_per_second = isrv.v0;
+	*drift_info = isrv.v1;
+	return isrv.status;
+}
+
+/* Flush all the processor and platform level instruction and/or data caches */
+static inline s64
+ia64_sal_cache_flush (u64 cache_type)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+
+/* Initialize all the processor and platform level instruction and data caches */
+static inline s64
+ia64_sal_cache_init (void)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_CACHE_INIT, 0, 0, 0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Clear the processor and platform information logged by SAL with respect to the machine
+ * state at the time of MCA's, INITs, CMCs, or CPEs.
+ */
+static inline s64
+ia64_sal_clear_state_info (u64 sal_info_type)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SAL_CLEAR_STATE_INFO, sal_info_type, 0,
+	              0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+
+/* Get the processor and platform information logged by SAL with respect to the machine
+ * state at the time of the MCAs, INITs, CMCs, or CPEs.
+ */
+static inline u64
+ia64_sal_get_state_info (u64 sal_info_type, u64 *sal_info)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO, sal_info_type, 0,
+	              sal_info, 0, 0, 0, 0);
+	if (isrv.status)
+		return 0;
+
+	return isrv.v0;
+}
+
+/*
+ * Get the maximum size of the information logged by SAL with respect to the machine state
+ * at the time of MCAs, INITs, CMCs, or CPEs.
+ */
+static inline u64
+ia64_sal_get_state_info_size (u64 sal_info_type)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO_SIZE, sal_info_type, 0,
+	              0, 0, 0, 0, 0);
+	if (isrv.status)
+		return 0;
+	return isrv.v0;
+}
+
+/*
+ * Causes the processor to go into a spin loop within SAL where SAL awaits a wakeup from
+ * the monarch processor.  Must not lock, because it will not return on any cpu until the
+ * monarch processor sends a wake up.
+ */
+static inline s64
+ia64_sal_mc_rendez (void)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_NOLOCK(isrv, SAL_MC_RENDEZ, 0, 0, 0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Allow the OS to specify the interrupt number to be used by SAL to interrupt OS during
+ * the machine check rendezvous sequence as well as the mechanism to wake up the
+ * non-monarch processor at the end of machine check processing.
+ * Returns the complete ia64_sal_retval because some calls return more than just a status
+ * value.
+ */
+static inline struct ia64_sal_retval
+ia64_sal_mc_set_params (u64 param_type, u64 i_or_m, u64 i_or_m_val, u64 timeout, u64 rz_always)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_MC_SET_PARAMS, param_type, i_or_m, i_or_m_val,
+		 timeout, rz_always, 0, 0);
+	return isrv;
+}
+
+/* Read from PCI configuration space */
+static inline s64
+ia64_sal_pci_config_read (u64 pci_config_addr, int type, u64 size, u64 *value)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_PCI_CONFIG_READ, pci_config_addr, size, type, 0, 0, 0, 0);
+	if (value)
+		*value = isrv.v0;
+	return isrv.status;
+}
+
+/* Write to PCI configuration space */
+static inline s64
+ia64_sal_pci_config_write (u64 pci_config_addr, int type, u64 size, u64 value)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_PCI_CONFIG_WRITE, pci_config_addr, size, value,
+	         type, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Register physical addresses of locations needed by SAL when SAL procedures are invoked
+ * in virtual mode.
+ */
+static inline s64
+ia64_sal_register_physical_addr (u64 phys_entry, u64 phys_addr)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_REGISTER_PHYSICAL_ADDR, phys_entry, phys_addr,
+	         0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Register software dependent code locations within SAL. These locations are handlers or
+ * entry points where SAL will pass control for the specified event. These event handlers
+ * are for the bott rendezvous, MCAs and INIT scenarios.
+ */
+static inline s64
+ia64_sal_set_vectors (u64 vector_type,
+		      u64 handler_addr1, u64 gp1, u64 handler_len1,
+		      u64 handler_addr2, u64 gp2, u64 handler_len2)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_SET_VECTORS, vector_type,
+			handler_addr1, gp1, handler_len1,
+			handler_addr2, gp2, handler_len2);
+
+	return isrv.status;
+}
+
+/* Update the contents of PAL block in the non-volatile storage device */
+static inline s64
+ia64_sal_update_pal (u64 param_buf, u64 scratch_buf, u64 scratch_buf_size,
+		     u64 *error_code, u64 *scratch_buf_size_needed)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_UPDATE_PAL, param_buf, scratch_buf, scratch_buf_size,
+	         0, 0, 0, 0);
+	if (error_code)
+		*error_code = isrv.v0;
+	if (scratch_buf_size_needed)
+		*scratch_buf_size_needed = isrv.v1;
+	return isrv.status;
+}
+
+extern unsigned long sal_platform_features;
+
+extern int (*salinfo_platform_oemdata)(const u8 *, u8 **, u64 *);
+
+struct sal_ret_values {
+	long r8; long r9; long r10; long r11;
+};
+
+#define IA64_SAL_OEMFUNC_MIN		0x02000000
+#define IA64_SAL_OEMFUNC_MAX		0x03ffffff
+
+extern int ia64_sal_oemcall(struct ia64_sal_retval *, u64, u64, u64, u64, u64,
+			    u64, u64, u64);
+extern int ia64_sal_oemcall_nolock(struct ia64_sal_retval *, u64, u64, u64,
+				   u64, u64, u64, u64, u64);
+extern int ia64_sal_oemcall_reentrant(struct ia64_sal_retval *, u64, u64, u64,
+				      u64, u64, u64, u64, u64);
+
+extern void ia64_sal_handler_init(void *entry_point, void *gpval);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_SAL_H */
diff --git a/include/asm-ia64/scatterlist.h b/include/asm-ia64/scatterlist.h
new file mode 100644
index 000000000000..834a189ef189
--- /dev/null
+++ b/include/asm-ia64/scatterlist.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IA64_SCATTERLIST_H
+#define _ASM_IA64_SCATTERLIST_H
+
+/*
+ * Modified 1998-1999, 2001-2002, 2004
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+struct scatterlist {
+	struct page *page;
+	unsigned int offset;
+	unsigned int length;	/* buffer length */
+
+	dma_addr_t dma_address;
+	unsigned int dma_length;
+};
+
+/*
+ * It used to be that ISA_DMA_THRESHOLD had something to do with the
+ * DMA-limits of ISA-devices.  Nowadays, its only remaining use (apart
+ * from the aha1542.c driver, which isn't 64-bit clean anyhow) is to
+ * tell the block-layer (via BLK_BOUNCE_ISA) what the max. physical
+ * address of a page is that is allocated with GFP_DMA.  On IA-64,
+ * that's 4GB - 1.
+ */
+#define ISA_DMA_THRESHOLD	0xffffffff
+
+#endif /* _ASM_IA64_SCATTERLIST_H */
diff --git a/include/asm-ia64/sections.h b/include/asm-ia64/sections.h
new file mode 100644
index 000000000000..8e3dbde1b429
--- /dev/null
+++ b/include/asm-ia64/sections.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_SECTIONS_H
+#define _ASM_IA64_SECTIONS_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm-generic/sections.h>
+
+extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
+extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
+extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
+extern char __start_gate_section[];
+extern char __start_gate_mckinley_e9_patchlist[], __end_gate_mckinley_e9_patchlist[];
+extern char __start_gate_vtop_patchlist[], __end_gate_vtop_patchlist[];
+extern char __start_gate_fsyscall_patchlist[], __end_gate_fsyscall_patchlist[];
+extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_bubble_down_patchlist[];
+extern char __start_unwind[], __end_unwind[];
+
+#endif /* _ASM_IA64_SECTIONS_H */
+
diff --git a/include/asm-ia64/segment.h b/include/asm-ia64/segment.h
new file mode 100644
index 000000000000..b89e2b3d648f
--- /dev/null
+++ b/include/asm-ia64/segment.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_IA64_SEGMENT_H
+#define _ASM_IA64_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif /* _ASM_IA64_SEGMENT_H */
diff --git a/include/asm-ia64/semaphore.h b/include/asm-ia64/semaphore.h
new file mode 100644
index 000000000000..3a2f0f3f78f3
--- /dev/null
+++ b/include/asm-ia64/semaphore.h
@@ -0,0 +1,102 @@
+#ifndef _ASM_IA64_SEMAPHORE_H
+#define _ASM_IA64_SEMAPHORE_H
+
+/*
+ * Copyright (C) 1998-2000 Hewlett-Packard Co
+ * Copyright (C) 1998-2000 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+#include <asm/atomic.h>
+
+struct semaphore {
+	atomic_t count;
+	int sleepers;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.count		= ATOMIC_INIT(n),				\
+	.sleepers	= 0,						\
+	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER((name).wait)	\
+}
+
+#define __MUTEX_INITIALIZER(name)	__SEMAPHORE_INITIALIZER(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count)					\
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name, count)
+
+#define DECLARE_MUTEX(name)		__DECLARE_SEMAPHORE_GENERIC(name, 1)
+#define DECLARE_MUTEX_LOCKED(name)	__DECLARE_SEMAPHORE_GENERIC(name, 0)
+
+static inline void
+sema_init (struct semaphore *sem, int val)
+{
+	*sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val);
+}
+
+static inline void
+init_MUTEX (struct semaphore *sem)
+{
+	sema_init(sem, 1);
+}
+
+static inline void
+init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init(sem, 0);
+}
+
+extern void __down (struct semaphore * sem);
+extern int  __down_interruptible (struct semaphore * sem);
+extern int  __down_trylock (struct semaphore * sem);
+extern void __up (struct semaphore * sem);
+
+/*
+ * Atomically decrement the semaphore's count.  If it goes negative,
+ * block the calling thread in the TASK_UNINTERRUPTIBLE state.
+ */
+static inline void
+down (struct semaphore *sem)
+{
+	might_sleep();
+	if (atomic_dec_return(&sem->count) < 0)
+		__down(sem);
+}
+
+/*
+ * Atomically decrement the semaphore's count.  If it goes negative,
+ * block the calling thread in the TASK_INTERRUPTIBLE state.
+ */
+static inline int
+down_interruptible (struct semaphore * sem)
+{
+	int ret = 0;
+
+	might_sleep();
+	if (atomic_dec_return(&sem->count) < 0)
+		ret = __down_interruptible(sem);
+	return ret;
+}
+
+static inline int
+down_trylock (struct semaphore *sem)
+{
+	int ret = 0;
+
+	if (atomic_dec_return(&sem->count) < 0)
+		ret = __down_trylock(sem);
+	return ret;
+}
+
+static inline void
+up (struct semaphore * sem)
+{
+	if (atomic_inc_return(&sem->count) <= 0)
+		__up(sem);
+}
+
+#endif /* _ASM_IA64_SEMAPHORE_H */
diff --git a/include/asm-ia64/sembuf.h b/include/asm-ia64/sembuf.h
new file mode 100644
index 000000000000..1340fbc04d3e
--- /dev/null
+++ b/include/asm-ia64/sembuf.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_SEMBUF_H
+#define _ASM_IA64_SEMBUF_H
+
+/*
+ * The semid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_IA64_SEMBUF_H */
diff --git a/include/asm-ia64/serial.h b/include/asm-ia64/serial.h
new file mode 100644
index 000000000000..0c7a2f3dcf13
--- /dev/null
+++ b/include/asm-ia64/serial.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-ia64/serial.h
+ *
+ * Derived from the i386 version.
+ */
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/*
+ * All legacy serial ports should be enumerated via ACPI namespace, so
+ * we need not list them here.
+ */
diff --git a/include/asm-ia64/setup.h b/include/asm-ia64/setup.h
new file mode 100644
index 000000000000..ea29b57affcb
--- /dev/null
+++ b/include/asm-ia64/setup.h
@@ -0,0 +1,6 @@
+#ifndef __IA64_SETUP_H
+#define __IA64_SETUP_H
+
+#define COMMAND_LINE_SIZE	512
+
+#endif
diff --git a/include/asm-ia64/shmbuf.h b/include/asm-ia64/shmbuf.h
new file mode 100644
index 000000000000..585002a77acd
--- /dev/null
+++ b/include/asm-ia64/shmbuf.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_SHMBUF_H
+#define _ASM_IA64_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_IA64_SHMBUF_H */
diff --git a/include/asm-ia64/shmparam.h b/include/asm-ia64/shmparam.h
new file mode 100644
index 000000000000..d07508dc54ae
--- /dev/null
+++ b/include/asm-ia64/shmparam.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_IA64_SHMPARAM_H
+#define _ASM_IA64_SHMPARAM_H
+
+/*
+ * SHMLBA controls minimum alignment at which shared memory segments
+ * get attached.  The IA-64 architecture says that there may be a
+ * performance degradation when there are virtual aliases within 1MB.
+ * To reduce the chance of this, we set SHMLBA to 1MB. --davidm 00/12/20
+ */
+#define	SHMLBA	(1024*1024)
+
+#endif /* _ASM_IA64_SHMPARAM_H */
diff --git a/include/asm-ia64/sigcontext.h b/include/asm-ia64/sigcontext.h
new file mode 100644
index 000000000000..57ff777bcc40
--- /dev/null
+++ b/include/asm-ia64/sigcontext.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_IA64_SIGCONTEXT_H
+#define _ASM_IA64_SIGCONTEXT_H
+
+/*
+ * Copyright (C) 1998, 1999, 2001 Hewlett-Packard Co
+ * Copyright (C) 1998, 1999, 2001 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/fpu.h>
+
+#define IA64_SC_FLAG_ONSTACK_BIT		0	/* is handler running on signal stack? */
+#define IA64_SC_FLAG_IN_SYSCALL_BIT		1	/* did signal interrupt a syscall? */
+#define IA64_SC_FLAG_FPH_VALID_BIT		2	/* is state in f[32]-f[127] valid? */
+
+#define IA64_SC_FLAG_ONSTACK		(1 << IA64_SC_FLAG_ONSTACK_BIT)
+#define IA64_SC_FLAG_IN_SYSCALL		(1 << IA64_SC_FLAG_IN_SYSCALL_BIT)
+#define IA64_SC_FLAG_FPH_VALID		(1 << IA64_SC_FLAG_FPH_VALID_BIT)
+
+# ifndef __ASSEMBLY__
+
+/*
+ * Note on handling of register backing store: sc_ar_bsp contains the address that would
+ * be found in ar.bsp after executing a "cover" instruction the context in which the
+ * signal was raised.  If signal delivery required switching to an alternate signal stack
+ * (sc_rbs_base is not NULL), the "dirty" partition (as it would exist after executing the
+ * imaginary "cover" instruction) is backed by the *alternate* signal stack, not the
+ * original one.  In this case, sc_rbs_base contains the base address of the new register
+ * backing store.  The number of registers in the dirty partition can be calculated as:
+ *
+ *   ndirty = ia64_rse_num_regs(sc_rbs_base, sc_rbs_base + (sc_loadrs >> 16))
+ *
+ */
+
+struct sigcontext {
+	unsigned long		sc_flags;	/* see manifest constants above */
+	unsigned long		sc_nat;		/* bit i == 1 iff scratch reg gr[i] is a NaT */
+	stack_t			sc_stack;	/* previously active stack */
+
+	unsigned long		sc_ip;		/* instruction pointer */
+	unsigned long		sc_cfm;		/* current frame marker */
+	unsigned long		sc_um;		/* user mask bits */
+	unsigned long		sc_ar_rsc;	/* register stack configuration register */
+	unsigned long		sc_ar_bsp;	/* backing store pointer */
+	unsigned long		sc_ar_rnat;	/* RSE NaT collection register */
+	unsigned long		sc_ar_ccv;	/* compare and exchange compare value register */
+	unsigned long		sc_ar_unat;	/* ar.unat of interrupted context */
+	unsigned long		sc_ar_fpsr;	/* floating-point status register */
+	unsigned long		sc_ar_pfs;	/* previous function state */
+	unsigned long		sc_ar_lc;	/* loop count register */
+	unsigned long		sc_pr;		/* predicate registers */
+	unsigned long		sc_br[8];	/* branch registers */
+	/* Note: sc_gr[0] is used as the "uc_link" member of ucontext_t */
+	unsigned long		sc_gr[32];	/* general registers (static partition) */
+	struct ia64_fpreg	sc_fr[128];	/* floating-point registers */
+
+	unsigned long		sc_rbs_base;	/* NULL or new base of sighandler's rbs */
+	unsigned long		sc_loadrs;	/* see description above */
+
+	unsigned long		sc_ar25;	/* cmp8xchg16 uses this */
+	unsigned long		sc_ar26;	/* rsvd for scratch use */
+	unsigned long		sc_rsvd[12];	/* reserved for future use */
+	/*
+	 * The mask must come last so we can increase _NSIG_WORDS
+	 * without breaking binary compatibility.
+	 */
+	sigset_t		sc_mask;	/* signal mask to restore after handler returns */
+};
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_IA64_SIGCONTEXT_H */
diff --git a/include/asm-ia64/siginfo.h b/include/asm-ia64/siginfo.h
new file mode 100644
index 000000000000..d55f139cbcdc
--- /dev/null
+++ b/include/asm-ia64/siginfo.h
@@ -0,0 +1,141 @@
+#ifndef _ASM_IA64_SIGINFO_H
+#define _ASM_IA64_SIGINFO_H
+
+/*
+ * Based on <asm-i386/siginfo.h>.
+ *
+ * Modified 1998-2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define SI_PAD_SIZE	((SI_MAX_SIZE/sizeof(int)) - 4)
+
+#define SIGEV_PAD_SIZE	((SIGEV_MAX_SIZE/sizeof(int)) - 4)
+
+#define HAVE_ARCH_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER
+
+#include <asm-generic/siginfo.h>
+
+typedef struct siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+	int __pad0;
+
+	union {
+		int _pad[SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			uid_t _uid;		/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			char _pad[sizeof(__ARCH_SI_UID_T) - sizeof(int)];
+			sigval_t _sigval;	/* must overlay ._rt._sigval! */
+			int _sys_private;	/* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			uid_t _uid;		/* sender's uid */
+			sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			pid_t _pid;		/* which child */
+			uid_t _uid;		/* sender's uid */
+			int _status;		/* exit code */
+			clock_t _utime;
+			clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			void __user *_addr;	/* faulting insn/memory ref. */
+			int _imm;		/* immediate value for "break" */
+			unsigned int _flags;	/* see below */
+			unsigned long _isr;	/* isr */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			long _band;	/* POLL_IN, POLL_OUT, POLL_MSG (XPG requires a "long") */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} siginfo_t;
+
+#define si_imm		_sifields._sigfault._imm	/* as per UNIX SysV ABI spec */
+#define si_flags	_sifields._sigfault._flags
+/*
+ * si_isr is valid for SIGILL, SIGFPE, SIGSEGV, SIGBUS, and SIGTRAP provided that
+ * si_code is non-zero and __ISR_VALID is set in si_flags.
+ */
+#define si_isr		_sifields._sigfault._isr
+
+/*
+ * Flag values for si_flags:
+ */
+#define __ISR_VALID_BIT	0
+#define __ISR_VALID	(1 << __ISR_VALID_BIT)
+
+/*
+ * SIGILL si_codes
+ */
+#define ILL_BADIADDR	(__SI_FAULT|9)	/* unimplemented instruction address */
+#define __ILL_BREAK	(__SI_FAULT|10)	/* illegal break */
+#define __ILL_BNDMOD	(__SI_FAULT|11)	/* bundle-update (modification) in progress */
+#undef NSIGILL
+#define NSIGILL		11
+
+/*
+ * SIGFPE si_codes
+ */
+#define __FPE_DECOVF	(__SI_FAULT|9)	/* decimal overflow */
+#define __FPE_DECDIV	(__SI_FAULT|10)	/* decimal division by zero */
+#define __FPE_DECERR	(__SI_FAULT|11)	/* packed decimal error */
+#define __FPE_INVASC	(__SI_FAULT|12)	/* invalid ASCII digit */
+#define __FPE_INVDEC	(__SI_FAULT|13)	/* invalid decimal digit */
+#undef NSIGFPE
+#define NSIGFPE		13
+
+/*
+ * SIGSEGV si_codes
+ */
+#define __SEGV_PSTKOVF	(__SI_FAULT|3)	/* paragraph stack overflow */
+#undef NSIGSEGV
+#define NSIGSEGV	3
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_BRANCH	(__SI_FAULT|3)	/* process taken branch trap */
+#define TRAP_HWBKPT	(__SI_FAULT|4)	/* hardware breakpoint or watchpoint */
+#undef NSIGTRAP
+#define NSIGTRAP	4
+
+#ifdef __KERNEL__
+#include <linux/string.h>
+
+static inline void
+copy_siginfo (siginfo_t *to, siginfo_t *from)
+{
+	if (from->si_code < 0)
+		memcpy(to, from, sizeof(siginfo_t));
+	else
+		/* _sigchld is currently the largest know union member */
+		memcpy(to, from, 4*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_SIGINFO_H */
diff --git a/include/asm-ia64/signal.h b/include/asm-ia64/signal.h
new file mode 100644
index 000000000000..660a759744dd
--- /dev/null
+++ b/include/asm-ia64/signal.h
@@ -0,0 +1,185 @@
+#ifndef _ASM_IA64_SIGNAL_H
+#define _ASM_IA64_SIGNAL_H
+
+/*
+ * Modified 1998-2001, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * Unfortunately, this file is being included by bits/signal.h in
+ * glibc-2.x.  Hence the #ifdef __KERNEL__ ugliness.
+ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+/* signal 31 is no longer "unused", but the SIGUNUSED macro remains for backwards compatibility */
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+/*
+ * The minimum stack size needs to be fairly large because we want to
+ * be sure that an app compiled for today's CPUs will continue to run
+ * on all future CPU models.  The CPU model matters because the signal
+ * frame needs to have space for the complete machine state, including
+ * all physical stacked registers.  The number of physical stacked
+ * registers is CPU model dependent, but given that the width of
+ * ar.rsc.loadrs is 14 bits, we can assume that they'll never take up
+ * more than 16KB of space.
+ */
+#if 1
+  /*
+   * This is a stupid typo: the value was _meant_ to be 131072 (0x20000), but I typed it
+   * in wrong. ;-(  To preserve backwards compatibility, we leave the kernel at the
+   * incorrect value and fix libc only.
+   */
+# define MINSIGSTKSZ	131027	/* min. stack size for sigaltstack() */
+#else
+# define MINSIGSTKSZ	131072	/* min. stack size for sigaltstack() */
+#endif
+#define SIGSTKSZ	262144	/* default stack size for sigaltstack() */
+
+#ifdef __KERNEL__
+
+#define _NSIG		64
+#define _NSIG_BPW	64
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#define SA_PERCPU_IRQ		0x02000000
+
+#endif /* __KERNEL__ */
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+# ifndef __ASSEMBLY__
+
+#  include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+/* Type of a signal handler.  */
+typedef void __user (*__sighandler_t)(int);
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+typedef unsigned long old_sigset_t;
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#  include <asm/sigcontext.h>
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+void set_sigdelayed(pid_t pid, int signo, int code, void __user *addr);
+
+#endif /* __KERNEL__ */
+
+# endif /* !__ASSEMBLY__ */
+#endif /* _ASM_IA64_SIGNAL_H */
diff --git a/include/asm-ia64/smp.h b/include/asm-ia64/smp.h
new file mode 100644
index 000000000000..c4a227acfeb0
--- /dev/null
+++ b/include/asm-ia64/smp.h
@@ -0,0 +1,134 @@
+/*
+ * SMP Support
+ *
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * (c) Copyright 2001-2003, 2005 Hewlett-Packard Development Company, L.P.
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ */
+#ifndef _ASM_IA64_SMP_H
+#define _ASM_IA64_SMP_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/param.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+
+static inline unsigned int
+ia64_get_lid (void)
+{
+	union {
+		struct {
+			unsigned long reserved : 16;
+			unsigned long eid : 8;
+			unsigned long id : 8;
+			unsigned long ignored : 32;
+		} f;
+		unsigned long bits;
+	} lid;
+
+	lid.bits = ia64_getreg(_IA64_REG_CR_LID);
+	return lid.f.id << 8 | lid.f.eid;
+}
+
+#ifdef CONFIG_SMP
+
+#define XTP_OFFSET		0x1e0008
+
+#define SMP_IRQ_REDIRECTION	(1 << 0)
+#define SMP_IPI_REDIRECTION	(1 << 1)
+
+#define smp_processor_id()	(current_thread_info()->cpu)
+
+extern struct smp_boot_data {
+	int cpu_count;
+	int cpu_phys_id[NR_CPUS];
+} smp_boot_data __initdata;
+
+extern char no_int_routing __devinitdata;
+
+extern cpumask_t cpu_online_map;
+extern void __iomem *ipi_base_addr;
+extern unsigned char smp_int_redirect;
+
+extern volatile int ia64_cpu_to_sapicid[];
+#define cpu_physical_id(i)	ia64_cpu_to_sapicid[i]
+
+extern unsigned long ap_wakeup_vector;
+
+/*
+ * Function to map hard smp processor id to logical id.  Slow, so don't use this in
+ * performance-critical code.
+ */
+static inline int
+cpu_logical_id (int cpuid)
+{
+	int i;
+
+	for (i = 0; i < NR_CPUS; ++i)
+		if (cpu_physical_id(i) == cpuid)
+			break;
+	return i;
+}
+
+/*
+ * XTP control functions:
+ *	min_xtp   : route all interrupts to this CPU
+ *	normal_xtp: nominal XTP value
+ *	max_xtp   : never deliver interrupts to this CPU.
+ */
+
+static inline void
+min_xtp (void)
+{
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		writeb(0x00, ipi_base_addr + XTP_OFFSET); /* XTP to min */
+}
+
+static inline void
+normal_xtp (void)
+{
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		writeb(0x08, ipi_base_addr + XTP_OFFSET); /* XTP normal */
+}
+
+static inline void
+max_xtp (void)
+{
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		writeb(0x0f, ipi_base_addr + XTP_OFFSET); /* Set XTP to max */
+}
+
+#define hard_smp_processor_id()		ia64_get_lid()
+
+/* Upping and downing of CPUs */
+extern int __cpu_disable (void);
+extern void __cpu_die (unsigned int cpu);
+extern void cpu_die (void) __attribute__ ((noreturn));
+extern int __cpu_up (unsigned int cpu);
+extern void __init smp_build_cpu_map(void);
+
+extern void __init init_smp_config (void);
+extern void smp_do_timer (struct pt_regs *regs);
+
+extern int smp_call_function_single (int cpuid, void (*func) (void *info), void *info,
+				     int retry, int wait);
+extern void smp_send_reschedule (int cpu);
+extern void lock_ipi_calllock(void);
+extern void unlock_ipi_calllock(void);
+
+#else
+
+#define cpu_logical_id(i)		0
+#define cpu_physical_id(i)		ia64_get_lid()
+
+#endif /* CONFIG_SMP */
+#endif /* _ASM_IA64_SMP_H */
diff --git a/include/asm-ia64/sn/addrs.h b/include/asm-ia64/sn/addrs.h
new file mode 100644
index 000000000000..c916bd22767a
--- /dev/null
+++ b/include/asm-ia64/sn/addrs.h
@@ -0,0 +1,238 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1992-1999,2001-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_ADDRS_H
+#define _ASM_IA64_SN_ADDRS_H
+
+#include <asm/percpu.h>
+#include <asm/sn/types.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/pda.h>
+
+/*
+ *  Memory/SHUB Address Format:
+ *  +-+---------+--+--------------+
+ *  |0|  NASID  |AS| NodeOffset   |
+ *  +-+---------+--+--------------+
+ *
+ *  NASID: (low NASID bit is 0) Memory and SHUB MMRs
+ *   AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0
+ *     00: Local Resources and MMR space
+ *           Top bit of NodeOffset
+ *               0: Local resources space
+ *                  node id:
+ *                        0: IA64/NT compatibility space
+ *                        2: Local MMR Space
+ *                        4: Local memory, regardless of local node id
+ *               1: Global MMR space
+ *     01: GET space.
+ *     10: AMO space.
+ *     11: Cacheable memory space.
+ *
+ *   NodeOffset: byte offset
+ *
+ *
+ *  TIO address format:
+ *  +-+----------+--+--------------+
+ *  |0|  NASID   |AS| Nodeoffset   |
+ *  +-+----------+--+--------------+
+ *
+ *  NASID: (low NASID bit is 1) TIO
+ *   AS: 2-bit Chiplet Identifier
+ *     00: TIO LB (Indicates TIO MMR access.)
+ *     01: TIO ICE (indicates coretalk space access.)
+ * 
+ *   NodeOffset: top bit must be set.
+ *
+ *
+ * Note that in both of the above address formats, the low
+ * NASID bit indicates if the reference is to the SHUB or TIO MMRs.
+ */
+
+
+/*
+ * Define basic shift & mask constants for manipulating NASIDs and AS values.
+ */
+#define NASID_BITMASK		(sn_hub_info->nasid_bitmask)
+#define NASID_SHIFT		(sn_hub_info->nasid_shift)
+#define AS_SHIFT		(sn_hub_info->as_shift)
+#define AS_BITMASK		0x3UL
+
+#define NASID_MASK              ((u64)NASID_BITMASK << NASID_SHIFT)
+#define AS_MASK			((u64)AS_BITMASK << AS_SHIFT)
+#define REGION_BITS		0xe000000000000000UL
+
+
+/*
+ * AS values. These are the same on both SHUB1 & SHUB2.
+ */
+#define AS_GET_VAL		1UL
+#define AS_AMO_VAL		2UL
+#define AS_CAC_VAL		3UL
+#define AS_GET_SPACE		(AS_GET_VAL << AS_SHIFT)
+#define AS_AMO_SPACE		(AS_AMO_VAL << AS_SHIFT)
+#define AS_CAC_SPACE		(AS_CAC_VAL << AS_SHIFT)
+
+
+/*
+ * Base addresses for various address ranges.
+ */
+#define CACHED			0xe000000000000000UL
+#define UNCACHED                0xc000000000000000UL
+#define UNCACHED_PHYS           0x8000000000000000UL
+
+
+/* 
+ * Virtual Mode Local & Global MMR space.  
+ */
+#define SH1_LOCAL_MMR_OFFSET	0x8000000000UL
+#define SH2_LOCAL_MMR_OFFSET	0x0200000000UL
+#define LOCAL_MMR_OFFSET	(is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET)
+#define LOCAL_MMR_SPACE		(UNCACHED | LOCAL_MMR_OFFSET)
+#define LOCAL_PHYS_MMR_SPACE	(UNCACHED_PHYS | LOCAL_MMR_OFFSET)
+
+#define SH1_GLOBAL_MMR_OFFSET	0x0800000000UL
+#define SH2_GLOBAL_MMR_OFFSET	0x0300000000UL
+#define GLOBAL_MMR_OFFSET	(is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET)
+#define GLOBAL_MMR_SPACE	(UNCACHED | GLOBAL_MMR_OFFSET)
+
+/*
+ * Physical mode addresses
+ */
+#define GLOBAL_PHYS_MMR_SPACE	(UNCACHED_PHYS | GLOBAL_MMR_OFFSET)
+
+
+/*
+ * Clear region & AS bits.
+ */
+#define TO_PHYS_MASK		(~(REGION_BITS | AS_MASK))
+
+
+/*
+ * Misc NASID manipulation.
+ */
+#define NASID_SPACE(n)		((u64)(n) << NASID_SHIFT)
+#define REMOTE_ADDR(n,a)	(NASID_SPACE(n) | (a))
+#define NODE_OFFSET(x)		((x) & (NODE_ADDRSPACE_SIZE - 1))
+#define NODE_ADDRSPACE_SIZE     (1UL << AS_SHIFT)
+#define NASID_GET(x)		(int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK)
+#define LOCAL_MMR_ADDR(a)	(LOCAL_MMR_SPACE | (a))
+#define GLOBAL_MMR_ADDR(n,a)	(GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a))
+#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a))
+#define GLOBAL_CAC_ADDR(n,a)	(CAC_BASE | REMOTE_ADDR(n,a))
+#define CHANGE_NASID(n,x)	((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n)))
+
+
+/* non-II mmr's start at top of big window space (4G) */
+#define BWIN_TOP		0x0000000100000000UL
+
+/*
+ * general address defines
+ */
+#define CAC_BASE		(CACHED   | AS_CAC_SPACE)
+#define AMO_BASE		(UNCACHED | AS_AMO_SPACE)
+#define GET_BASE		(CACHED   | AS_GET_SPACE)
+
+/*
+ * Convert Memory addresses between various addressing modes.
+ */
+#define TO_PHYS(x)		(TO_PHYS_MASK & (x))
+#define TO_CAC(x)		(CAC_BASE     | TO_PHYS(x))
+#define TO_AMO(x)		(AMO_BASE     | TO_PHYS(x))
+#define TO_GET(x)		(GET_BASE     | TO_PHYS(x))
+
+
+/*
+ * Covert from processor physical address to II/TIO physical address:
+ *	II - squeeze out the AS bits
+ *	TIO- requires a chiplet id in bits 38-39.  For DMA to memory,
+ *           the chiplet id is zero.  If we implement TIO-TIO dma, we might need
+ *           to insert a chiplet id into this macro.  However, it is our belief
+ *           right now that this chiplet id will be ICE, which is also zero.
+ */
+#define PHYS_TO_TIODMA(x)	( (((u64)(x) & NASID_MASK) << 2) | NODE_OFFSET(x))
+#define PHYS_TO_DMA(x)          ( (((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x))
+
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+#define BWIN_SIZE_BITS			29	/* big window size: 512M */
+#define TIO_BWIN_SIZE_BITS		30	/* big window size: 1G */
+#define NODE_SWIN_BASE(n, w)		((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \
+		: RAW_NODE_SWIN_BASE(n, w))
+#define NODE_IO_BASE(n)			(GLOBAL_MMR_SPACE | NASID_SPACE(n))
+#define BWIN_SIZE			(1UL << BWIN_SIZE_BITS)
+#define NODE_BWIN_BASE0(n)		(NODE_IO_BASE(n) + BWIN_SIZE)
+#define NODE_BWIN_BASE(n, w)		(NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS))
+#define RAW_NODE_SWIN_BASE(n, w)	(NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS))
+#define BWIN_WIDGET_MASK		0x7
+#define BWIN_WINDOWNUM(x)		(((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
+
+#define TIO_BWIN_WINDOW_SELECT_MASK	0x7
+#define TIO_BWIN_WINDOWNUM(x)		(((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK)
+
+
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define SWIN_SIZE_BITS			24
+#define	SWIN_WIDGET_MASK		0xF
+
+#define TIO_SWIN_SIZE_BITS		28
+#define TIO_SWIN_SIZE			(1UL << TIO_SWIN_SIZE_BITS)
+#define TIO_SWIN_WIDGET_MASK		0x3
+
+/*
+ * Convert smallwindow address to xtalk address.
+ *
+ * 'addr' can be physical or virtual address, but will be converted
+ * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
+ */
+#define	SWIN_WIDGETNUM(x)		(((x)  >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
+#define TIO_SWIN_WIDGETNUM(x)		(((x)  >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK)
+
+
+/*
+ * The following macros produce the correct base virtual address for
+ * the hub registers. The REMOTE_HUB_* macro produce
+ * the address for the specified hub's registers.  The intent is
+ * that the appropriate PI, MD, NI, or II register would be substituted
+ * for x.
+ *
+ *   WARNING:
+ *	When certain Hub chip workaround are defined, it's not sufficient
+ *	to dereference the *_HUB_ADDR() macros.  You should instead use
+ *	HUB_L() and HUB_S() if you must deal with pointers to hub registers.
+ *	Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
+ *	They're always safe.
+ */
+#define REMOTE_HUB_ADDR(n,x)						\
+	((n & 1) ?							\
+	/* TIO: */							\
+	((volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))			\
+	: /* SHUB: */							\
+	(((x) & BWIN_TOP) ? ((volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))\
+	: ((volatile u64 *)(NODE_SWIN_BASE(n,1) + 0x800000 + (x)))))
+
+
+
+#define HUB_L(x)			(*((volatile typeof(*x) *)x))
+#define	HUB_S(x,d)			(*((volatile typeof(*x) *)x) = (d))
+
+#define REMOTE_HUB_L(n, a)		HUB_L(REMOTE_HUB_ADDR((n), (a)))
+#define REMOTE_HUB_S(n, a, d)		HUB_S(REMOTE_HUB_ADDR((n), (a)), (d))
+
+
+#endif /* _ASM_IA64_SN_ADDRS_H */
diff --git a/include/asm-ia64/sn/arch.h b/include/asm-ia64/sn/arch.h
new file mode 100644
index 000000000000..7c349f07916a
--- /dev/null
+++ b/include/asm-ia64/sn/arch.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI specific setup.
+ *
+ * Copyright (C) 1995-1997,1999,2001-2004 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_IA64_SN_ARCH_H
+#define _ASM_IA64_SN_ARCH_H
+
+#include <asm/types.h>
+#include <asm/percpu.h>
+#include <asm/sn/types.h>
+#include <asm/sn/sn_cpuid.h>
+
+/*
+ * The following defines attributes of the HUB chip. These attributes are
+ * frequently referenced. They are kept in the per-cpu data areas of each cpu.
+ * They are kept together in a struct to minimize cache misses.
+ */
+struct sn_hub_info_s {
+	u8 shub2;
+	u8 nasid_shift;
+	u8 as_shift;
+	u8 shub_1_1_found;
+	u16 nasid_bitmask;
+};
+DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
+#define sn_hub_info 	(&__get_cpu_var(__sn_hub_info))
+#define is_shub2()	(sn_hub_info->shub2)
+#define is_shub1()	(sn_hub_info->shub2 == 0)
+
+/*
+ * Use this macro to test if shub 1.1 wars should be enabled
+ */
+#define enable_shub_wars_1_1()	(sn_hub_info->shub_1_1_found)
+
+
+/*
+ * This is the maximum number of nodes that can be part of a kernel.
+ * Effectively, it's the maximum number of compact node ids (cnodeid_t).
+ * This is not necessarily the same as MAX_NASIDS.
+ */
+#define MAX_COMPACT_NODES	2048
+#define CPUS_PER_NODE		4
+
+extern void sn_flush_all_caches(long addr, long bytes);
+
+#endif /* _ASM_IA64_SN_ARCH_H */
diff --git a/include/asm-ia64/sn/bte.h b/include/asm-ia64/sn/bte.h
new file mode 100644
index 000000000000..0ec27f99c181
--- /dev/null
+++ b/include/asm-ia64/sn/bte.h
@@ -0,0 +1,148 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+
+#ifndef _ASM_IA64_SN_BTE_H
+#define _ASM_IA64_SN_BTE_H
+
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+#include <asm/sn/types.h>
+
+
+/* #define BTE_DEBUG */
+/* #define BTE_DEBUG_VERBOSE */
+
+#ifdef BTE_DEBUG
+#  define BTE_PRINTK(x) printk x	/* Terse */
+#  ifdef BTE_DEBUG_VERBOSE
+#    define BTE_PRINTKV(x) printk x	/* Verbose */
+#  else
+#    define BTE_PRINTKV(x)
+#  endif /* BTE_DEBUG_VERBOSE */
+#else
+#  define BTE_PRINTK(x)
+#  define BTE_PRINTKV(x)
+#endif	/* BTE_DEBUG */
+
+
+/* BTE status register only supports 16 bits for length field */
+#define BTE_LEN_BITS (16)
+#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
+#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)
+
+
+/* Define hardware */
+#define BTES_PER_NODE 2
+
+
+/* Define hardware modes */
+#define BTE_NOTIFY (IBCT_NOTIFY)
+#define BTE_NORMAL BTE_NOTIFY
+#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE)
+/* Use a reserved bit to let the caller specify a wait for any BTE */
+#define BTE_WACQUIRE (0x4000)
+/* Use the BTE on the node with the destination memory */
+#define BTE_USE_DEST (BTE_WACQUIRE << 1)
+/* Use any available BTE interface on any node for the transfer */
+#define BTE_USE_ANY (BTE_USE_DEST << 1)
+/* macro to force the IBCT0 value valid */
+#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE))
+
+#define BTE_ACTIVE		(IBLS_BUSY | IBLS_ERROR)
+#define BTE_WORD_AVAILABLE	(IBLS_BUSY << 1)
+#define BTE_WORD_BUSY		(~BTE_WORD_AVAILABLE)
+
+/*
+ * Some macros to simplify reading.
+ * Start with macros to locate the BTE control registers.
+ */
+#define BTE_LNSTAT_LOAD(_bte)						\
+			HUB_L(_bte->bte_base_addr)
+#define BTE_LNSTAT_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr, (_x))
+#define BTE_SRC_STORE(_bte, _x)						\
+			HUB_S(_bte->bte_base_addr + (BTEOFF_SRC/8), (_x))
+#define BTE_DEST_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr + (BTEOFF_DEST/8), (_x))
+#define BTE_CTRL_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr + (BTEOFF_CTRL/8), (_x))
+#define BTE_NOTIF_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr + (BTEOFF_NOTIFY/8), (_x))
+
+
+/* Possible results from bte_copy and bte_unaligned_copy */
+/* The following error codes map into the BTE hardware codes
+ * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses
+ * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero
+ * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error
+ * codes to give the following error codes.
+ */
+#define BTEFAIL_OFFSET	1
+
+typedef enum {
+	BTE_SUCCESS,		/* 0 is success */
+	BTEFAIL_DIR,		/* Directory error due to IIO access*/
+	BTEFAIL_POISON,		/* poison error on IO access (write to poison page) */
+	BTEFAIL_WERR,		/* Write error (ie WINV to a Read only line) */
+	BTEFAIL_ACCESS,		/* access error (protection violation) */
+	BTEFAIL_PWERR,		/* Partial Write Error */
+	BTEFAIL_PRERR,		/* Partial Read Error */
+	BTEFAIL_TOUT,		/* CRB Time out */
+	BTEFAIL_XTERR,		/* Incoming xtalk pkt had error bit */
+	BTEFAIL_NOTAVAIL,	/* BTE not available */
+} bte_result_t;
+
+
+/*
+ * Structure defining a bte.  An instance of this
+ * structure is created in the nodepda for each
+ * bte on that node (as defined by BTES_PER_NODE)
+ * This structure contains everything necessary
+ * to work with a BTE.
+ */
+struct bteinfo_s {
+	volatile u64 notify ____cacheline_aligned;
+	u64 *bte_base_addr ____cacheline_aligned;
+	spinlock_t spinlock;
+	cnodeid_t bte_cnode;	/* cnode                            */
+	int bte_error_count;	/* Number of errors encountered     */
+	int bte_num;		/* 0 --> BTE0, 1 --> BTE1           */
+	int cleanup_active;	/* Interface is locked for cleanup  */
+	volatile bte_result_t bh_error;	/* error while processing   */
+	volatile u64 *most_rcnt_na;
+};
+
+
+/*
+ * Function prototypes (functions defined in bte.c, used elsewhere)
+ */
+extern bte_result_t bte_copy(u64, u64, u64, u64, void *);
+extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64);
+extern void bte_error_handler(unsigned long);
+
+#define bte_zero(dest, len, mode, notification) \
+	bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)
+
+/*
+ * The following is the prefered way of calling bte_unaligned_copy
+ * If the copy is fully cache line aligned, then bte_copy is
+ * used instead.  Since bte_copy is inlined, this saves a call
+ * stack.  NOTE: bte_copy is called synchronously and does block
+ * until the transfer is complete.  In order to get the asynch
+ * version of bte_copy, you must perform this check yourself.
+ */
+#define BTE_UNALIGNED_COPY(src, dest, len, mode)                        \
+	(((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) ||             \
+	  (dest & L1_CACHE_MASK)) ?                                     \
+	 bte_unaligned_copy(src, dest, len, mode) :              	\
+	 bte_copy(src, dest, len, mode, NULL))
+
+
+#endif	/* _ASM_IA64_SN_BTE_H */
diff --git a/include/asm-ia64/sn/clksupport.h b/include/asm-ia64/sn/clksupport.h
new file mode 100644
index 000000000000..d340c365a824
--- /dev/null
+++ b/include/asm-ia64/sn/clksupport.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+/*
+ * This file contains definitions for accessing a platform supported high resolution
+ * clock. The clock is monitonically increasing and can be accessed from any node
+ * in the system. The clock is synchronized across nodes - all nodes see the
+ * same value.
+ * 
+ *	RTC_COUNTER_ADDR - contains the address of the counter 
+ *
+ */
+
+#ifndef _ASM_IA64_SN_CLKSUPPORT_H
+#define _ASM_IA64_SN_CLKSUPPORT_H
+
+extern unsigned long sn_rtc_cycles_per_second;
+
+#define RTC_COUNTER_ADDR	((long *)LOCAL_MMR_ADDR(SH_RTC))
+
+#define rtc_time()		(*RTC_COUNTER_ADDR)
+
+#endif /* _ASM_IA64_SN_CLKSUPPORT_H */
diff --git a/include/asm-ia64/sn/fetchop.h b/include/asm-ia64/sn/fetchop.h
new file mode 100644
index 000000000000..5f4ad8f4b5d2
--- /dev/null
+++ b/include/asm-ia64/sn/fetchop.h
@@ -0,0 +1,85 @@
+/*
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_FETCHOP_H
+#define _ASM_IA64_SN_FETCHOP_H
+
+#include <linux/config.h>
+
+#define FETCHOP_BASENAME	"sgi_fetchop"
+#define FETCHOP_FULLNAME	"/dev/sgi_fetchop"
+
+
+
+#define FETCHOP_VAR_SIZE 64 /* 64 byte per fetchop variable */
+
+#define FETCHOP_LOAD		0
+#define FETCHOP_INCREMENT	8
+#define FETCHOP_DECREMENT	16
+#define FETCHOP_CLEAR		24
+
+#define FETCHOP_STORE		0
+#define FETCHOP_AND		24
+#define FETCHOP_OR		32
+
+#define FETCHOP_CLEAR_CACHE	56
+
+#define FETCHOP_LOAD_OP(addr, op) ( \
+         *(volatile long *)((char*) (addr) + (op)))
+
+#define FETCHOP_STORE_OP(addr, op, x) ( \
+         *(volatile long *)((char*) (addr) + (op)) = (long) (x))
+
+#ifdef __KERNEL__
+
+/*
+ * Convert a region 6 (kaddr) address to the address of the fetchop variable
+ */
+#define FETCHOP_KADDR_TO_MSPEC_ADDR(kaddr)	TO_MSPEC(kaddr)
+
+
+/*
+ * Each Atomic Memory Operation (AMO formerly known as fetchop)
+ * variable is 64 bytes long.  The first 8 bytes are used.  The
+ * remaining 56 bytes are unaddressable due to the operation taking
+ * that portion of the address.
+ * 
+ * NOTE: The AMO_t _MUST_ be placed in either the first or second half
+ * of the cache line.  The cache line _MUST NOT_ be used for anything
+ * other than additional AMO_t entries.  This is because there are two
+ * addresses which reference the same physical cache line.  One will
+ * be a cached entry with the memory type bits all set.  This address
+ * may be loaded into processor cache.  The AMO_t will be referenced
+ * uncached via the memory special memory type.  If any portion of the
+ * cached cache-line is modified, when that line is flushed, it will
+ * overwrite the uncached value in physical memory and lead to
+ * inconsistency.
+ */
+typedef struct {
+        u64 variable;
+        u64 unused[7];
+} AMO_t;
+
+
+/*
+ * The following APIs are externalized to the kernel to allocate/free pages of
+ * fetchop variables.
+ *	fetchop_kalloc_page	- Allocate/initialize 1 fetchop page on the
+ *				  specified cnode. 
+ *	fetchop_kfree_page	- Free a previously allocated fetchop page
+ */
+
+unsigned long fetchop_kalloc_page(int nid);
+void fetchop_kfree_page(unsigned long maddr);
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_SN_FETCHOP_H */
+
diff --git a/include/asm-ia64/sn/geo.h b/include/asm-ia64/sn/geo.h
new file mode 100644
index 000000000000..f566343d25f8
--- /dev/null
+++ b/include/asm-ia64/sn/geo.h
@@ -0,0 +1,124 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_GEO_H
+#define _ASM_IA64_SN_GEO_H
+
+/* The geoid_t implementation below is based loosely on the pcfg_t
+   implementation in sys/SN/promcfg.h. */
+
+/* Type declaractions */
+
+/* Size of a geoid_t structure (must be before decl. of geoid_u) */
+#define GEOID_SIZE	8	/* Would 16 be better?  The size can
+				   be different on different platforms. */
+
+#define MAX_SLABS	0xe	/* slabs per module */
+
+typedef unsigned char	geo_type_t;
+
+/* Fields common to all substructures */
+typedef struct geo_any_s {
+    moduleid_t	module;		/* The module (box) this h/w lives in */
+    geo_type_t	type;		/* What type of h/w is named by this geoid_t */
+    slabid_t	slab;		/* The logical assembly within the module */
+} geo_any_t;
+
+/* Additional fields for particular types of hardware */
+typedef struct geo_node_s {
+    geo_any_t	any;		/* No additional fields needed */
+} geo_node_t;
+
+typedef struct geo_rtr_s {
+    geo_any_t	any;		/* No additional fields needed */
+} geo_rtr_t;
+
+typedef struct geo_iocntl_s {
+    geo_any_t	any;		/* No additional fields needed */
+} geo_iocntl_t;
+
+typedef struct geo_pcicard_s {
+    geo_iocntl_t	any;
+    char		bus;	/* Bus/widget number */
+    char		slot;	/* PCI slot number */
+} geo_pcicard_t;
+
+/* Subcomponents of a node */
+typedef struct geo_cpu_s {
+    geo_node_t	node;
+    char	slice;		/* Which CPU on the node */
+} geo_cpu_t;
+
+typedef struct geo_mem_s {
+    geo_node_t	node;
+    char	membus;		/* The memory bus on the node */
+    char	memslot;	/* The memory slot on the bus */
+} geo_mem_t;
+
+
+typedef union geoid_u {
+    geo_any_t	any;
+    geo_node_t	node;
+    geo_iocntl_t	iocntl;
+    geo_pcicard_t	pcicard;
+    geo_rtr_t	rtr;
+    geo_cpu_t	cpu;
+    geo_mem_t	mem;
+    char	padsize[GEOID_SIZE];
+} geoid_t;
+
+
+/* Preprocessor macros */
+
+#define GEO_MAX_LEN	48	/* max. formatted length, plus some pad:
+				   module/001c07/slab/5/node/memory/2/slot/4 */
+
+/* Values for geo_type_t */
+#define GEO_TYPE_INVALID	0
+#define GEO_TYPE_MODULE		1
+#define GEO_TYPE_NODE		2
+#define GEO_TYPE_RTR		3
+#define GEO_TYPE_IOCNTL		4
+#define GEO_TYPE_IOCARD		5
+#define GEO_TYPE_CPU		6
+#define GEO_TYPE_MEM		7
+#define GEO_TYPE_MAX		(GEO_TYPE_MEM+1)
+
+/* Parameter for hwcfg_format_geoid_compt() */
+#define GEO_COMPT_MODULE	1
+#define GEO_COMPT_SLAB		2
+#define GEO_COMPT_IOBUS		3
+#define GEO_COMPT_IOSLOT	4
+#define GEO_COMPT_CPU		5
+#define GEO_COMPT_MEMBUS	6
+#define GEO_COMPT_MEMSLOT	7
+
+#define GEO_INVALID_STR		"<invalid>"
+
+#define INVALID_NASID           ((nasid_t)-1)
+#define INVALID_CNODEID         ((cnodeid_t)-1)
+#define INVALID_PNODEID         ((pnodeid_t)-1)
+#define INVALID_SLAB            (slabid_t)-1
+#define INVALID_MODULE          ((moduleid_t)-1)
+#define INVALID_PARTID          ((partid_t)-1)
+
+static inline slabid_t geo_slab(geoid_t g)
+{
+	return (g.any.type == GEO_TYPE_INVALID) ?
+		INVALID_SLAB : g.any.slab;
+}
+
+static inline moduleid_t geo_module(geoid_t g)
+{
+	return (g.any.type == GEO_TYPE_INVALID) ?
+		INVALID_MODULE : g.any.module;
+}
+
+extern geoid_t cnodeid_get_geoid(cnodeid_t cnode);
+
+#endif /* _ASM_IA64_SN_GEO_H */
diff --git a/include/asm-ia64/sn/intr.h b/include/asm-ia64/sn/intr.h
new file mode 100644
index 000000000000..e51471fb0867
--- /dev/null
+++ b/include/asm-ia64/sn/intr.h
@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_INTR_H
+#define _ASM_IA64_SN_INTR_H
+
+#define SGI_UART_VECTOR		(0xe9)
+#define SGI_PCIBR_ERROR		(0x33)
+
+/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */
+#define SGI_XPC_ACTIVATE                (0x30)
+#define SGI_II_ERROR                    (0x31)
+#define SGI_XBOW_ERROR                  (0x32)
+#define SGI_PCIBR_ERROR                 (0x33)
+#define SGI_ACPI_SCI_INT                (0x34)
+#define SGI_TIOCA_ERROR                 (0x35)
+#define SGI_TIO_ERROR                   (0x36)
+#define SGI_TIOCX_ERROR                 (0x37)
+#define SGI_MMTIMER_VECTOR              (0x38)
+#define SGI_XPC_NOTIFY                  (0xe7)
+
+#define IA64_SN2_FIRST_DEVICE_VECTOR    (0x3c)
+#define IA64_SN2_LAST_DEVICE_VECTOR     (0xe6)
+
+#define SN2_IRQ_RESERVED        (0x1)
+#define SN2_IRQ_CONNECTED       (0x2)
+#define SN2_IRQ_SHARED          (0x4)
+
+// The SN PROM irq struct
+struct sn_irq_info {
+	struct sn_irq_info *irq_next;	/* sharing irq list	     */
+	short		irq_nasid;	/* Nasid IRQ is assigned to  */
+	int		irq_slice;	/* slice IRQ is assigned to  */
+	int		irq_cpuid;	/* kernel logical cpuid	     */
+	int		irq_irq;	/* the IRQ number */
+	int		irq_int_bit;	/* Bridge interrupt pin */
+	uint64_t	irq_xtalkaddr;	/* xtalkaddr IRQ is sent to  */
+	int		irq_bridge_type;/* pciio asic type (pciio.h) */
+	void	       *irq_bridge;	/* bridge generating irq     */
+	void	       *irq_pciioinfo;	/* associated pciio_info_t   */
+	int		irq_last_intr;	/* For Shub lb lost intr WAR */
+	int		irq_cookie;	/* unique cookie 	     */
+	int		irq_flags;	/* flags */
+	int		irq_share_cnt;	/* num devices sharing IRQ   */
+};
+
+extern void sn_send_IPI_phys(int, long, int, int);
+
+#define CPU_VECTOR_TO_IRQ(cpuid,vector) (vector)
+
+#endif /* _ASM_IA64_SN_INTR_H */
diff --git a/include/asm-ia64/sn/io.h b/include/asm-ia64/sn/io.h
new file mode 100644
index 000000000000..42209733f6b1
--- /dev/null
+++ b/include/asm-ia64/sn/io.h
@@ -0,0 +1,265 @@
+/* 
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_SN_IO_H
+#define _ASM_SN_IO_H
+#include <linux/compiler.h>
+#include <asm/intrinsics.h>
+
+extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */
+extern void __sn_mmiowb(void); /* Forward definition */
+
+extern int numionodes;
+
+#define __sn_mf_a()   ia64_mfa()
+
+extern void sn_dma_flush(unsigned long);
+
+#define __sn_inb ___sn_inb
+#define __sn_inw ___sn_inw
+#define __sn_inl ___sn_inl
+#define __sn_outb ___sn_outb
+#define __sn_outw ___sn_outw
+#define __sn_outl ___sn_outl
+#define __sn_readb ___sn_readb
+#define __sn_readw ___sn_readw
+#define __sn_readl ___sn_readl
+#define __sn_readq ___sn_readq
+#define __sn_readb_relaxed ___sn_readb_relaxed
+#define __sn_readw_relaxed ___sn_readw_relaxed
+#define __sn_readl_relaxed ___sn_readl_relaxed
+#define __sn_readq_relaxed ___sn_readq_relaxed
+
+/*
+ * The following routines are SN Platform specific, called when
+ * a reference is made to inX/outX set macros.  SN Platform
+ * inX set of macros ensures that Posted DMA writes on the
+ * Bridge is flushed.
+ *
+ * The routines should be self explainatory.
+ */
+
+static inline unsigned int
+___sn_inb (unsigned long port)
+{
+	volatile unsigned char *addr;
+	unsigned char ret = -1;
+
+	if ((addr = sn_io_addr(port))) {
+		ret = *addr;
+		__sn_mf_a();
+		sn_dma_flush((unsigned long)addr);
+	}
+	return ret;
+}
+
+static inline unsigned int
+___sn_inw (unsigned long port)
+{
+	volatile unsigned short *addr;
+	unsigned short ret = -1;
+
+	if ((addr = sn_io_addr(port))) {
+		ret = *addr;
+		__sn_mf_a();
+		sn_dma_flush((unsigned long)addr);
+	}
+	return ret;
+}
+
+static inline unsigned int
+___sn_inl (unsigned long port)
+{
+	volatile unsigned int *addr;
+	unsigned int ret = -1;
+
+	if ((addr = sn_io_addr(port))) {
+		ret = *addr;
+		__sn_mf_a();
+		sn_dma_flush((unsigned long)addr);
+	}
+	return ret;
+}
+
+static inline void
+___sn_outb (unsigned char val, unsigned long port)
+{
+	volatile unsigned char *addr;
+
+	if ((addr = sn_io_addr(port))) {
+		*addr = val;
+		__sn_mmiowb();
+	}
+}
+
+static inline void
+___sn_outw (unsigned short val, unsigned long port)
+{
+	volatile unsigned short *addr;
+
+	if ((addr = sn_io_addr(port))) {
+		*addr = val;
+		__sn_mmiowb();
+	}
+}
+
+static inline void
+___sn_outl (unsigned int val, unsigned long port)
+{
+	volatile unsigned int *addr;
+
+	if ((addr = sn_io_addr(port))) {
+		*addr = val;
+		__sn_mmiowb();
+	}
+}
+
+/*
+ * The following routines are SN Platform specific, called when 
+ * a reference is made to readX/writeX set macros.  SN Platform 
+ * readX set of macros ensures that Posted DMA writes on the 
+ * Bridge is flushed.
+ * 
+ * The routines should be self explainatory.
+ */
+
+static inline unsigned char
+___sn_readb (const volatile void __iomem *addr)
+{
+	unsigned char val;
+
+	val = *(volatile unsigned char __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+static inline unsigned short
+___sn_readw (const volatile void __iomem *addr)
+{
+	unsigned short val;
+
+	val = *(volatile unsigned short __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+static inline unsigned int
+___sn_readl (const volatile void __iomem *addr)
+{
+	unsigned int val;
+
+	val = *(volatile unsigned int __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+static inline unsigned long
+___sn_readq (const volatile void __iomem *addr)
+{
+	unsigned long val;
+
+	val = *(volatile unsigned long __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+/*
+ * For generic and SN2 kernels, we have a set of fast access
+ * PIO macros.	These macros are provided on SN Platform
+ * because the normal inX and readX macros perform an
+ * additional task of flushing Post DMA request on the Bridge.
+ *
+ * These routines should be self explainatory.
+ */
+
+static inline unsigned int
+sn_inb_fast (unsigned long port)
+{
+	volatile unsigned char *addr = (unsigned char *)port;
+	unsigned char ret;
+
+	ret = *addr;
+	__sn_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+sn_inw_fast (unsigned long port)
+{
+	volatile unsigned short *addr = (unsigned short *)port;
+	unsigned short ret;
+
+	ret = *addr;
+	__sn_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+sn_inl_fast (unsigned long port)
+{
+	volatile unsigned int *addr = (unsigned int *)port;
+	unsigned int ret;
+
+	ret = *addr;
+	__sn_mf_a();
+	return ret;
+}
+
+static inline unsigned char
+___sn_readb_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short
+___sn_readw_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned int
+___sn_readl_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *) addr;
+}
+
+static inline unsigned long
+___sn_readq_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long __force *) addr;
+}
+
+struct pci_dev;
+
+static inline int
+sn_pci_set_vchan(struct pci_dev *pci_dev, unsigned long *addr, int vchan)
+{
+
+	if (vchan > 1) {
+		return -1;
+	}
+
+	if (!(*addr >> 32))	/* Using a mask here would be cleaner */
+		return 0;	/* but this generates better code */
+
+	if (vchan == 1) {
+		/* Set Bit 57 */
+		*addr |= (1UL << 57);
+	} else {
+		/* Clear Bit 57 */
+		*addr &= ~(1UL << 57);
+	}
+
+	return 0;
+}
+
+#endif	/* _ASM_SN_IO_H */
diff --git a/include/asm-ia64/sn/klconfig.h b/include/asm-ia64/sn/klconfig.h
new file mode 100644
index 000000000000..9f920c70a62a
--- /dev/null
+++ b/include/asm-ia64/sn/klconfig.h
@@ -0,0 +1,272 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/klconfig.h>.
+ *
+ * Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_IA64_SN_KLCONFIG_H
+#define _ASM_IA64_SN_KLCONFIG_H
+
+/*
+ * The KLCONFIG structures store info about the various BOARDs found
+ * during Hardware Discovery. In addition, it stores info about the
+ * components found on the BOARDs.
+ */
+
+typedef s32 klconf_off_t;
+
+
+/* Functions/macros needed to use this structure */
+
+typedef struct kl_config_hdr {
+	char		pad[20];
+	klconf_off_t	ch_board_info;	/* the link list of boards */
+	char		pad0[88];
+} kl_config_hdr_t;
+
+
+#define NODE_OFFSET_TO_LBOARD(nasid,off)        (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off)))
+
+/*
+ * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
+ * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to 
+ * the LOCAL/current NODE. REMOTE means it is attached to a different
+ * node.(TBD - Need a way to treat ROUTER boards.)
+ *
+ * There are 2 different structures to represent these boards -
+ * lboard - Local board, rboard - remote board. These 2 structures
+ * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
+ * Figure below). The first byte of the rboard or lboard structure
+ * is used to find out its type - no unions are used.
+ * If it is a lboard, then the config info of this board will be found
+ * on the local node. (LOCAL NODE BASE + offset value gives pointer to 
+ * the structure.
+ * If it is a rboard, the local structure contains the node number
+ * and the offset of the beginning of the LINKED LIST on the remote node.
+ * The details of the hardware on a remote node can be built locally,
+ * if required, by reading the LINKED LIST on the remote node and 
+ * ignoring all the rboards on that node.
+ *
+ * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the 
+ * First board info on the remote node. The remote node list is 
+ * traversed as the local list, using the REMOTE BASE ADDRESS and not
+ * the local base address and ignoring all rboard values.
+ *
+ * 
+ KLCONFIG
+
+ +------------+      +------------+      +------------+      +------------+
+ |  lboard    |  +-->|   lboard   |  +-->|   rboard   |  +-->|   lboard   |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | board info |  |   | board info |  |   |errinfo,bptr|  |   | board info |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | offset     |--+   |  offset    |--+   |  offset    |--+   |offset=NULL |
+ +------------+      +------------+      +------------+      +------------+
+
+
+ +------------+
+ | board info |
+ +------------+       +--------------------------------+
+ | compt 1    |------>| type, rev, diaginfo, size ...  |  (CPU)
+ +------------+       +--------------------------------+
+ | compt 2    |--+
+ +------------+  |    +--------------------------------+
+ |  ...       |  +--->| type, rev, diaginfo, size ...  |  (MEM_BANK)
+ +------------+       +--------------------------------+
+ | errinfo    |--+
+ +------------+  |    +--------------------------------+
+                 +--->|r/l brd errinfo,compt err flags |
+                      +--------------------------------+
+
+ *
+ * Each BOARD consists of COMPONENTs and the BOARD structure has 
+ * pointers (offsets) to its COMPONENT structure.
+ * The COMPONENT structure has version info, size and speed info, revision,
+ * error info and the NIC info. This structure can accommodate any
+ * BOARD with arbitrary COMPONENT composition.
+ *
+ * The ERRORINFO part of each BOARD has error information
+ * that describes errors about the BOARD itself. It also has flags to
+ * indicate the COMPONENT(s) on the board that have errors. The error 
+ * information specific to the COMPONENT is present in the respective 
+ * COMPONENT structure.
+ *
+ * The ERRORINFO structure is also treated like a COMPONENT, ie. the 
+ * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
+ * structure also has a pointer to the ERRORINFO structure. This is 
+ * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
+ * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where 
+ * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
+ * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info 
+ * which is present on the REMOTE NODE.(TBD)
+ * REMOTE ERRINFO can be stored on any of the nearest nodes 
+ * or on all the nearest nodes.(TBD)
+ * Like BOARD structures, REMOTE ERRINFO structures can be built locally
+ * using the rboard errinfo pointer.
+ *
+ * In order to get useful information from this Data organization, a set of
+ * interface routines are provided (TBD). The important thing to remember while
+ * manipulating the structures, is that, the NODE number information should
+ * be used. If the NODE is non-zero (remote) then each offset should
+ * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. 
+ * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
+ * 
+ * Note that these structures do not provide much info about connectivity.
+ * That info will be part of HWGRAPH, which is an extension of the cfg_t
+ * data structure. (ref IP27prom/cfg.h) It has to be extended to include
+ * the IO part of the Network(TBD).
+ *
+ * The data structures below define the above concepts.
+ */
+
+
+/*
+ * BOARD classes
+ */
+
+#define KLCLASS_MASK	0xf0   
+#define KLCLASS_NONE	0x00
+#define KLCLASS_NODE	0x10             /* CPU, Memory and HUB board */
+#define KLCLASS_CPU	KLCLASS_NODE	
+#define KLCLASS_IO	0x20             /* BaseIO, 4 ch SCSI, ethernet, FDDI 
+					    and the non-graphics widget boards */
+#define KLCLASS_ROUTER	0x30             /* Router board */
+#define KLCLASS_MIDPLANE 0x40            /* We need to treat this as a board
+                                            so that we can record error info */
+#define KLCLASS_IOBRICK	0x70		/* IP35 iobrick */
+#define KLCLASS_MAX	8		/* Bump this if a new CLASS is added */
+
+#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
+
+
+/*
+ * board types
+ */
+
+#define KLTYPE_MASK	0x0f
+#define KLTYPE(_x)      ((_x) & KLTYPE_MASK)
+
+#define KLTYPE_SNIA	(KLCLASS_CPU | 0x1)
+#define KLTYPE_TIO	(KLCLASS_CPU | 0x2)
+
+#define KLTYPE_ROUTER     (KLCLASS_ROUTER | 0x1)
+#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
+#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4)
+
+#define KLTYPE_IOBRICK_XBOW	(KLCLASS_MIDPLANE | 0x2)
+
+#define KLTYPE_IOBRICK		(KLCLASS_IOBRICK | 0x0)
+#define KLTYPE_NBRICK		(KLCLASS_IOBRICK | 0x4)
+#define KLTYPE_PXBRICK		(KLCLASS_IOBRICK | 0x6)
+#define KLTYPE_IXBRICK		(KLCLASS_IOBRICK | 0x7)
+#define KLTYPE_CGBRICK		(KLCLASS_IOBRICK | 0x8)
+#define KLTYPE_OPUSBRICK	(KLCLASS_IOBRICK | 0x9)
+#define KLTYPE_SABRICK          (KLCLASS_IOBRICK | 0xa)
+#define KLTYPE_IABRICK		(KLCLASS_IOBRICK | 0xb)
+#define KLTYPE_PABRICK          (KLCLASS_IOBRICK | 0xc)
+#define KLTYPE_GABRICK		(KLCLASS_IOBRICK | 0xd)
+
+
+/* 
+ * board structures
+ */
+
+#define MAX_COMPTS_PER_BRD 24
+
+typedef struct lboard_s {
+	klconf_off_t 	brd_next_any;     /* Next BOARD */
+	unsigned char 	struct_type;      /* type of structure, local or remote */
+	unsigned char 	brd_type;         /* type+class */
+	unsigned char 	brd_sversion;     /* version of this structure */
+        unsigned char 	brd_brevision;    /* board revision */
+        unsigned char 	brd_promver;      /* board prom version, if any */
+ 	unsigned char 	brd_flags;        /* Enabled, Disabled etc */
+	unsigned char 	brd_slot;         /* slot number */
+	unsigned short	brd_debugsw;      /* Debug switches */
+	geoid_t		brd_geoid;	  /* geo id */
+	partid_t 	brd_partition;    /* Partition number */
+        unsigned short 	brd_diagval;      /* diagnostic value */
+        unsigned short 	brd_diagparm;     /* diagnostic parameter */
+        unsigned char 	brd_inventory;    /* inventory history */
+        unsigned char 	brd_numcompts;    /* Number of components */
+        nic_t         	brd_nic;          /* Number in CAN */
+	nasid_t		brd_nasid;        /* passed parameter */
+	klconf_off_t 	brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
+	klconf_off_t 	brd_errinfo;      /* Board's error information */
+	struct lboard_s *brd_parent;	  /* Logical parent for this brd */
+	char            pad0[4];
+	unsigned char	brd_confidence;	  /* confidence that the board is bad */
+	nasid_t		brd_owner;        /* who owns this board */
+	unsigned char 	brd_nic_flags;    /* To handle 8 more NICs */
+	char		pad1[24];	  /* future expansion */
+	char		brd_name[32];
+	nasid_t		brd_next_same_host; /* host of next brd w/same nasid */
+	klconf_off_t	brd_next_same;    /* Next BOARD with same nasid */
+} lboard_t;
+
+#define KLCF_NUM_COMPS(_brd)	((_brd)->brd_numcompts)
+#define NODE_OFFSET_TO_KLINFO(n,off)    ((klinfo_t*) TO_NODE_CAC(n,off))
+#define KLCF_NEXT(_brd)         \
+        ((_brd)->brd_next_same ?     \
+         (NODE_OFFSET_TO_LBOARD((_brd)->brd_next_same_host, (_brd)->brd_next_same)): NULL)
+#define KLCF_NEXT_ANY(_brd)         \
+        ((_brd)->brd_next_any ?     \
+         (NODE_OFFSET_TO_LBOARD(NASID_GET(_brd), (_brd)->brd_next_any)): NULL)
+#define KLCF_COMP(_brd, _ndx)   \
+                ((((_brd)->brd_compts[(_ndx)]) == 0) ? 0 : \
+			(NODE_OFFSET_TO_KLINFO(NASID_GET(_brd), (_brd)->brd_compts[(_ndx)])))
+
+
+/*
+ * Generic info structure. This stores common info about a 
+ * component.
+ */
+ 
+typedef struct klinfo_s {                  /* Generic info */
+        unsigned char   struct_type;       /* type of this structure */
+        unsigned char   struct_version;    /* version of this structure */
+        unsigned char   flags;            /* Enabled, disabled etc */
+        unsigned char   revision;         /* component revision */
+        unsigned short  diagval;          /* result of diagnostics */
+        unsigned short  diagparm;         /* diagnostic parameter */
+        unsigned char   inventory;        /* previous inventory status */
+        unsigned short  partid;		   /* widget part number */
+	nic_t 		nic;              /* MUst be aligned properly */
+        unsigned char   physid;           /* physical id of component */
+        unsigned int    virtid;           /* virtual id as seen by system */
+	unsigned char	widid;	          /* Widget id - if applicable */
+	nasid_t		nasid;            /* node number - from parent */
+	char		pad1;		  /* pad out structure. */
+	char		pad2;		  /* pad out structure. */
+	void		*data;
+        klconf_off_t	errinfo;          /* component specific errors */
+        unsigned short  pad3;             /* pci fields have moved over to */
+        unsigned short  pad4;             /* klbri_t */
+} klinfo_t ;
+
+
+static inline lboard_t *find_lboard_any(lboard_t * start, unsigned char brd_type)
+{
+        /* Search all boards stored on this node. */
+
+        while (start) {
+                if (start->brd_type == brd_type)
+                        return start;
+                start = KLCF_NEXT_ANY(start);
+        }
+        /* Didn't find it. */
+        return (lboard_t *) NULL;
+}
+
+
+/* external declarations of Linux kernel functions. */
+
+extern lboard_t *root_lboard[];
+extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
+extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
+
+#endif /* _ASM_IA64_SN_KLCONFIG_H */
diff --git a/include/asm-ia64/sn/l1.h b/include/asm-ia64/sn/l1.h
new file mode 100644
index 000000000000..d5dbd55e44b5
--- /dev/null
+++ b/include/asm-ia64/sn/l1.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#ifndef _ASM_IA64_SN_L1_H
+#define _ASM_IA64_SN_L1_H
+
+/* brick type response codes */
+#define L1_BRICKTYPE_PX         0x23            /* # */
+#define L1_BRICKTYPE_PE         0x25            /* % */
+#define L1_BRICKTYPE_N_p0       0x26            /* & */
+#define L1_BRICKTYPE_IP45       0x34            /* 4 */
+#define L1_BRICKTYPE_IP41       0x35            /* 5 */
+#define L1_BRICKTYPE_TWISTER    0x36            /* 6 */ /* IP53 & ROUTER */
+#define L1_BRICKTYPE_IX         0x3d            /* = */
+#define L1_BRICKTYPE_IP34       0x61            /* a */
+#define L1_BRICKTYPE_GA		0x62            /* b */
+#define L1_BRICKTYPE_C          0x63            /* c */
+#define L1_BRICKTYPE_OPUS_TIO	0x66		/* f */
+#define L1_BRICKTYPE_I          0x69            /* i */
+#define L1_BRICKTYPE_N          0x6e            /* n */
+#define L1_BRICKTYPE_OPUS       0x6f		/* o */
+#define L1_BRICKTYPE_P          0x70            /* p */
+#define L1_BRICKTYPE_R          0x72            /* r */
+#define L1_BRICKTYPE_CHI_CG     0x76            /* v */
+#define L1_BRICKTYPE_X          0x78            /* x */
+#define L1_BRICKTYPE_X2         0x79            /* y */
+#define L1_BRICKTYPE_SA		0x5e            /* ^ */ /* TIO bringup brick */
+#define L1_BRICKTYPE_PA		0x6a            /* j */
+#define L1_BRICKTYPE_IA		0x6b            /* k */
+
+#endif /* _ASM_IA64_SN_L1_H */
diff --git a/include/asm-ia64/sn/leds.h b/include/asm-ia64/sn/leds.h
new file mode 100644
index 000000000000..66cf8c4d92c9
--- /dev/null
+++ b/include/asm-ia64/sn/leds.h
@@ -0,0 +1,33 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_LEDS_H
+#define _ASM_IA64_SN_LEDS_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/pda.h>
+#include <asm/sn/shub_mmr.h>
+
+#define LED0		(LOCAL_MMR_ADDR(SH_REAL_JUNK_BUS_LED0))
+#define LED_CPU_SHIFT	16
+
+#define LED_CPU_HEARTBEAT	0x01
+#define LED_CPU_ACTIVITY	0x02
+#define LED_ALWAYS_SET		0x00
+
+/*
+ * Basic macros for flashing the LEDS on an SGI SN.
+ */
+
+static __inline__ void
+set_led_bits(u8 value, u8 mask)
+{
+	pda->led_state = (pda->led_state & ~mask) | (value & mask);
+	*pda->led_address = (short) pda->led_state;
+}
+
+#endif /* _ASM_IA64_SN_LEDS_H */
+
diff --git a/include/asm-ia64/sn/module.h b/include/asm-ia64/sn/module.h
new file mode 100644
index 000000000000..734e980ece2f
--- /dev/null
+++ b/include/asm-ia64/sn/module.h
@@ -0,0 +1,127 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_MODULE_H
+#define _ASM_IA64_SN_MODULE_H
+
+/* parameter for format_module_id() */
+#define MODULE_FORMAT_BRIEF	1
+#define MODULE_FORMAT_LONG	2
+#define MODULE_FORMAT_LCD	3
+
+/*
+ *	Module id format
+ *
+ *	31-16	Rack ID (encoded class, group, number - 16-bit unsigned int)
+ *	 15-8	Brick type (8-bit ascii character)
+ *	  7-0	Bay (brick position in rack (0-63) - 8-bit unsigned int)
+ *
+ */
+
+/*
+ * Macros for getting the brick type
+ */
+#define MODULE_BTYPE_MASK	0xff00
+#define MODULE_BTYPE_SHFT	8
+#define MODULE_GET_BTYPE(_m)	(((_m) & MODULE_BTYPE_MASK) >> MODULE_BTYPE_SHFT)
+#define MODULE_BT_TO_CHAR(_b)	((char)(_b))
+#define MODULE_GET_BTCHAR(_m)	(MODULE_BT_TO_CHAR(MODULE_GET_BTYPE(_m)))
+
+/*
+ * Macros for getting the rack ID.
+ */
+#define MODULE_RACK_MASK	0xffff0000
+#define MODULE_RACK_SHFT	16
+#define MODULE_GET_RACK(_m)	(((_m) & MODULE_RACK_MASK) >> MODULE_RACK_SHFT)
+
+/*
+ * Macros for getting the brick position
+ */
+#define MODULE_BPOS_MASK	0x00ff
+#define MODULE_BPOS_SHFT	0
+#define MODULE_GET_BPOS(_m)	(((_m) & MODULE_BPOS_MASK) >> MODULE_BPOS_SHFT)
+
+/*
+ * Macros for encoding and decoding rack IDs
+ * A rack number consists of three parts:
+ *   class (0==CPU/mixed, 1==I/O), group, number
+ *
+ * Rack number is stored just as it is displayed on the screen:
+ * a 3-decimal-digit number.
+ */
+#define RACK_CLASS_DVDR         100
+#define RACK_GROUP_DVDR         10
+#define RACK_NUM_DVDR           1
+
+#define RACK_CREATE_RACKID(_c, _g, _n)  ((_c) * RACK_CLASS_DVDR +       \
+        (_g) * RACK_GROUP_DVDR + (_n) * RACK_NUM_DVDR)
+
+#define RACK_GET_CLASS(_r)              ((_r) / RACK_CLASS_DVDR)
+#define RACK_GET_GROUP(_r)              (((_r) - RACK_GET_CLASS(_r) *   \
+            RACK_CLASS_DVDR) / RACK_GROUP_DVDR)
+#define RACK_GET_NUM(_r)                (((_r) - RACK_GET_CLASS(_r) *   \
+            RACK_CLASS_DVDR - RACK_GET_GROUP(_r) *      \
+            RACK_GROUP_DVDR) / RACK_NUM_DVDR)
+
+/*
+ * Macros for encoding and decoding rack IDs
+ * A rack number consists of three parts:
+ *   class      1 bit, 0==CPU/mixed, 1==I/O
+ *   group      2 bits for CPU/mixed, 3 bits for I/O
+ *   number     3 bits for CPU/mixed, 2 bits for I/O (1 based)
+ */
+#define RACK_GROUP_BITS(_r)     (RACK_GET_CLASS(_r) ? 3 : 2)
+#define RACK_NUM_BITS(_r)       (RACK_GET_CLASS(_r) ? 2 : 3)
+
+#define RACK_CLASS_MASK(_r)     0x20
+#define RACK_CLASS_SHFT(_r)     5
+#define RACK_ADD_CLASS(_r, _c)  \
+        ((_r) |= (_c) << RACK_CLASS_SHFT(_r) & RACK_CLASS_MASK(_r))
+
+#define RACK_GROUP_SHFT(_r)     RACK_NUM_BITS(_r)
+#define RACK_GROUP_MASK(_r)     \
+        ( (((unsigned)1<<RACK_GROUP_BITS(_r)) - 1) << RACK_GROUP_SHFT(_r) )
+#define RACK_ADD_GROUP(_r, _g)  \
+        ((_r) |= (_g) << RACK_GROUP_SHFT(_r) & RACK_GROUP_MASK(_r))
+
+#define RACK_NUM_SHFT(_r)       0
+#define RACK_NUM_MASK(_r)       \
+        ( (((unsigned)1<<RACK_NUM_BITS(_r)) - 1) << RACK_NUM_SHFT(_r) )
+#define RACK_ADD_NUM(_r, _n)    \
+        ((_r) |= ((_n) - 1) << RACK_NUM_SHFT(_r) & RACK_NUM_MASK(_r))
+
+
+/*
+ * Brick type definitions
+ */
+#define MAX_BRICK_TYPES         256 /* brick type is stored as uchar */
+
+extern char brick_types[];
+
+#define MODULE_CBRICK           0
+#define MODULE_RBRICK           1
+#define MODULE_IBRICK           2
+#define MODULE_KBRICK           3
+#define MODULE_XBRICK           4
+#define MODULE_DBRICK           5
+#define MODULE_PBRICK           6
+#define MODULE_NBRICK           7
+#define MODULE_PEBRICK          8
+#define MODULE_PXBRICK          9
+#define MODULE_IXBRICK          10
+#define MODULE_CGBRICK		11
+#define MODULE_OPUSBRICK        12
+#define MODULE_SABRICK		13	/* TIO BringUp Brick */
+#define MODULE_IABRICK		14
+#define MODULE_PABRICK		15
+#define MODULE_GABRICK		16
+#define MODULE_OPUS_TIO		17	/* OPUS TIO Riser */
+
+extern char brick_types[];
+extern void format_module_id(char *, moduleid_t, int);
+
+#endif /* _ASM_IA64_SN_MODULE_H */
diff --git a/include/asm-ia64/sn/nodepda.h b/include/asm-ia64/sn/nodepda.h
new file mode 100644
index 000000000000..2fbde33656e6
--- /dev/null
+++ b/include/asm-ia64/sn/nodepda.h
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_NODEPDA_H
+#define _ASM_IA64_SN_NODEPDA_H
+
+
+#include <asm/semaphore.h>
+#include <asm/irq.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/intr.h>
+#include <asm/sn/pda.h>
+#include <asm/sn/bte.h>
+
+/*
+ * NUMA Node-Specific Data structures are defined in this file.
+ * In particular, this is the location of the node PDA.
+ * A pointer to the right node PDA is saved in each CPU PDA.
+ */
+
+/*
+ * Node-specific data structure.
+ *
+ * One of these structures is allocated on each node of a NUMA system.
+ *
+ * This structure provides a convenient way of keeping together 
+ * all per-node data structures. 
+ */
+struct phys_cpuid {
+	short			nasid;
+	char			subnode;
+	char			slice;
+};
+
+struct nodepda_s {
+	void 		*pdinfo;	/* Platform-dependent per-node info */
+	spinlock_t		bist_lock;
+
+	/*
+	 * The BTEs on this node are shared by the local cpus
+	 */
+	struct bteinfo_s	bte_if[BTES_PER_NODE];	/* Virtual Interface */
+	struct timer_list	bte_recovery_timer;
+	spinlock_t		bte_recovery_lock;
+
+	/* 
+	 * Array of pointers to the nodepdas for each node.
+	 */
+	struct nodepda_s	*pernode_pdaindr[MAX_COMPACT_NODES]; 
+
+	/*
+	 * Array of physical cpu identifiers. Indexed by cpuid.
+	 */
+	struct phys_cpuid	phys_cpuid[NR_CPUS];
+};
+
+typedef struct nodepda_s nodepda_t;
+
+/*
+ * Access Functions for node PDA.
+ * Since there is one nodepda for each node, we need a convenient mechanism
+ * to access these nodepdas without cluttering code with #ifdefs.
+ * The next set of definitions provides this.
+ * Routines are expected to use 
+ *
+ *	nodepda			-> to access node PDA for the node on which code is running
+ *	subnodepda		-> to access subnode PDA for the subnode on which code is running
+ *
+ *	NODEPDA(cnode)		-> to access node PDA for cnodeid 
+ *	SUBNODEPDA(cnode,sn)	-> to access subnode PDA for cnodeid/subnode
+ */
+
+#define	nodepda		pda->p_nodepda		/* Ptr to this node's PDA */
+#define	NODEPDA(cnode)		(nodepda->pernode_pdaindr[cnode])
+
+/*
+ * Check if given a compact node id the corresponding node has all the
+ * cpus disabled. 
+ */
+#define is_headless_node(cnode)		(nr_cpus_node(cnode) == 0)
+
+#endif /* _ASM_IA64_SN_NODEPDA_H */
diff --git a/include/asm-ia64/sn/pda.h b/include/asm-ia64/sn/pda.h
new file mode 100644
index 000000000000..e940d3647c80
--- /dev/null
+++ b/include/asm-ia64/sn/pda.h
@@ -0,0 +1,80 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PDA_H
+#define _ASM_IA64_SN_PDA_H
+
+#include <linux/cache.h>
+#include <asm/percpu.h>
+#include <asm/system.h>
+#include <asm/sn/bte.h>
+
+
+/*
+ * CPU-specific data structure.
+ *
+ * One of these structures is allocated for each cpu of a NUMA system.
+ *
+ * This structure provides a convenient way of keeping together 
+ * all SN per-cpu data structures. 
+ */
+
+typedef struct pda_s {
+
+	/* Having a pointer in the begining of PDA tends to increase
+	 * the chance of having this pointer in cache. (Yes something
+	 * else gets pushed out). Doing this reduces the number of memory
+	 * access to all nodepda variables to be one
+	 */
+	struct nodepda_s *p_nodepda;		/* Pointer to Per node PDA */
+	struct subnodepda_s *p_subnodepda;	/* Pointer to CPU  subnode PDA */
+
+	/*
+	 * Support for SN LEDs
+	 */
+	volatile short	*led_address;
+	u8		led_state;
+	u8		hb_state;	/* supports blinking heartbeat leds */
+	unsigned int	hb_count;
+
+	unsigned int	idle_flag;
+	
+	volatile unsigned long *bedrock_rev_id;
+	volatile unsigned long *pio_write_status_addr;
+	unsigned long pio_write_status_val;
+	volatile unsigned long *pio_shub_war_cam_addr;
+
+	unsigned long	sn_soft_irr[4];
+	unsigned long	sn_in_service_ivecs[4];
+	short		cnodeid_to_nasid_table[MAX_NUMNODES];
+	int		sn_lb_int_war_ticks;
+	int		sn_last_irq;
+	int		sn_first_irq;
+} pda_t;
+
+
+#define CACHE_ALIGN(x)	(((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1))
+
+/*
+ * PDA
+ * Per-cpu private data area for each cpu. The PDA is located immediately after
+ * the IA64 cpu_data area. A full page is allocated for the cp_data area for each
+ * cpu but only a small amout of the page is actually used. We put the SNIA PDA
+ * in the same page as the cpu_data area. Note that there is a check in the setup
+ * code to verify that we don't overflow the page.
+ *
+ * Seems like we should should cache-line align the pda so that any changes in the
+ * size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128
+ * or 512 boundary. Each has merits. For now, pick 128 but should be revisited later.
+ */
+DECLARE_PER_CPU(struct pda_s, pda_percpu);
+
+#define pda		(&__ia64_per_cpu_var(pda_percpu))
+
+#define pdacpu(cpu)	(&per_cpu(pda_percpu, cpu))
+
+#endif /* _ASM_IA64_SN_PDA_H */
diff --git a/include/asm-ia64/sn/rw_mmr.h b/include/asm-ia64/sn/rw_mmr.h
new file mode 100644
index 000000000000..f40fd1a5510d
--- /dev/null
+++ b/include/asm-ia64/sn/rw_mmr.h
@@ -0,0 +1,74 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+#ifndef _ASM_IA64_SN_RW_MMR_H
+#define _ASM_IA64_SN_RW_MMR_H
+
+
+/*
+ * This file contains macros used to access MMR registers via
+ * uncached physical addresses.
+ * 	pio_phys_read_mmr  - read an MMR
+ * 	pio_phys_write_mmr - write an MMR
+ * 	pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0
+ *		Second MMR will be skipped if address is NULL
+ *
+ * Addresses passed to these routines should be uncached physical addresses
+ * ie., 0x80000....
+ */
+
+
+extern inline long
+pio_phys_read_mmr(volatile long *mmr) 
+{
+	long val;
+        asm volatile
+            ("mov r2=psr;;"
+             "rsm psr.i | psr.dt;;"
+             "srlz.i;;"
+             "ld8.acq %0=[%1];;"
+             "mov psr.l=r2;;"
+             "srlz.i;;"
+             : "=r"(val)
+             : "r"(mmr)
+	     : "r2");
+        return val;
+}
+
+
+
+extern inline void
+pio_phys_write_mmr(volatile long *mmr, long val) 
+{
+        asm volatile
+            ("mov r2=psr;;"
+             "rsm psr.i | psr.dt;;"
+             "srlz.i;;"
+             "st8.rel [%0]=%1;;"
+             "mov psr.l=r2;;"
+             "srlz.i;;"
+	     :: "r"(mmr), "r"(val)
+             : "r2", "memory");
+}            
+
+extern inline void
+pio_atomic_phys_write_mmrs(volatile long *mmr1, long val1, volatile long *mmr2, long val2) 
+{
+        asm volatile
+            ("mov r2=psr;;"
+             "rsm psr.i | psr.dt | psr.ic;;"
+	     "cmp.ne p9,p0=%2,r0;"
+             "srlz.i;;"
+             "st8.rel [%0]=%1;"
+             "(p9) st8.rel [%2]=%3;;"
+             "mov psr.l=r2;;"
+             "srlz.i;;"
+	     :: "r"(mmr1), "r"(val1), "r"(mmr2), "r"(val2)
+             : "p9", "r2", "memory");
+}            
+
+#endif /* _ASM_IA64_SN_RW_MMR_H */
diff --git a/include/asm-ia64/sn/shub_mmr.h b/include/asm-ia64/sn/shub_mmr.h
new file mode 100644
index 000000000000..5c2fcf13d5ce
--- /dev/null
+++ b/include/asm-ia64/sn/shub_mmr.h
@@ -0,0 +1,441 @@
+/*
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SHUB_MMR_H
+#define _ASM_IA64_SN_SHUB_MMR_H
+
+/* ==================================================================== */
+/*                        Register "SH_IPI_INT"                         */
+/*               SHub Inter-Processor Interrupt Registers               */
+/* ==================================================================== */
+#define SH1_IPI_INT                               0x0000000110000380
+#define SH2_IPI_INT                               0x0000000010000380
+
+/*   SH_IPI_INT_TYPE                                                    */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_IPI_INT_TYPE_SHFT                     0
+#define SH_IPI_INT_TYPE_MASK                     0x0000000000000007
+
+/*   SH_IPI_INT_AGT                                                     */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_IPI_INT_AGT_SHFT                      3
+#define SH_IPI_INT_AGT_MASK                      0x0000000000000008
+
+/*   SH_IPI_INT_PID                                                     */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_IPI_INT_PID_SHFT                      4
+#define SH_IPI_INT_PID_MASK                      0x00000000000ffff0
+
+/*   SH_IPI_INT_BASE                                                    */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_IPI_INT_BASE_SHFT                     21
+#define SH_IPI_INT_BASE_MASK                     0x0003ffffffe00000
+
+/*   SH_IPI_INT_IDX                                                     */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_IPI_INT_IDX_SHFT                      52
+#define SH_IPI_INT_IDX_MASK                      0x0ff0000000000000
+
+/*   SH_IPI_INT_SEND                                                    */
+/*   Description:  Send Interrupt Message to PI, This generates a puls  */
+#define SH_IPI_INT_SEND_SHFT                     63
+#define SH_IPI_INT_SEND_MASK                     0x8000000000000000
+
+/* ==================================================================== */
+/*                     Register "SH_EVENT_OCCURRED"                     */
+/*                    SHub Interrupt Event Occurred                     */
+/* ==================================================================== */
+#define SH1_EVENT_OCCURRED                        0x0000000110010000
+#define SH1_EVENT_OCCURRED_ALIAS                  0x0000000110010008
+#define SH2_EVENT_OCCURRED                        0x0000000010010000
+#define SH2_EVENT_OCCURRED_ALIAS                  0x0000000010010008
+
+/* ==================================================================== */
+/*                     Register "SH_PI_CAM_CONTROL"                     */
+/*                      CRB CAM MMR Access Control                      */
+/* ==================================================================== */
+#define SH1_PI_CAM_CONTROL                        0x0000000120050300
+
+/* ==================================================================== */
+/*                        Register "SH_SHUB_ID"                         */
+/*                            SHub ID Number                            */
+/* ==================================================================== */
+#define SH1_SHUB_ID                               0x0000000110060580
+#define SH1_SHUB_ID_REVISION_SHFT                 28
+#define SH1_SHUB_ID_REVISION_MASK                 0x00000000f0000000
+
+/* ==================================================================== */
+/*                          Register "SH_RTC"                           */
+/*                           Real-time Clock                            */
+/* ==================================================================== */
+#define SH1_RTC                                   0x00000001101c0000
+#define SH2_RTC					  0x00000002101c0000
+#define SH_RTC_MASK                               0x007fffffffffffff
+
+/* ==================================================================== */
+/*                   Register "SH_PIO_WRITE_STATUS_0|1"                 */
+/*                      PIO Write Status for CPU 0 & 1                  */
+/* ==================================================================== */
+#define SH1_PIO_WRITE_STATUS_0                    0x0000000120070200
+#define SH1_PIO_WRITE_STATUS_1                    0x0000000120070280
+#define SH2_PIO_WRITE_STATUS_0                    0x0000000020070200
+#define SH2_PIO_WRITE_STATUS_1                    0x0000000020070280
+#define SH2_PIO_WRITE_STATUS_2                    0x0000000020070300
+#define SH2_PIO_WRITE_STATUS_3                    0x0000000020070380
+
+/*   SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK                               */
+/*   Description:  Deadlock response detected                           */
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT 1
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK 0x0000000000000002
+
+/*   SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT                          */
+/*   Description:  Count of currently pending PIO writes                */
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT 56
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK 0x3f00000000000000
+
+/* ==================================================================== */
+/*                Register "SH_PIO_WRITE_STATUS_0_ALIAS"                */
+/* ==================================================================== */
+#define SH1_PIO_WRITE_STATUS_0_ALIAS              0x0000000120070208
+#define SH2_PIO_WRITE_STATUS_0_ALIAS              0x0000000020070208
+
+/* ==================================================================== */
+/*                     Register "SH_EVENT_OCCURRED"                     */
+/*                    SHub Interrupt Event Occurred                     */
+/* ==================================================================== */
+/*   SH_EVENT_OCCURRED_UART_INT                                         */
+/*   Description:  Pending Junk Bus UART Interrupt                      */
+#define SH_EVENT_OCCURRED_UART_INT_SHFT          20
+#define SH_EVENT_OCCURRED_UART_INT_MASK          0x0000000000100000
+
+/*   SH_EVENT_OCCURRED_IPI_INT                                          */
+/*   Description:  Pending IPI Interrupt                                */
+#define SH_EVENT_OCCURRED_IPI_INT_SHFT           28
+#define SH_EVENT_OCCURRED_IPI_INT_MASK           0x0000000010000000
+
+/*   SH_EVENT_OCCURRED_II_INT0                                          */
+/*   Description:  Pending II 0 Interrupt                               */
+#define SH_EVENT_OCCURRED_II_INT0_SHFT           29
+#define SH_EVENT_OCCURRED_II_INT0_MASK           0x0000000020000000
+
+/*   SH_EVENT_OCCURRED_II_INT1                                          */
+/*   Description:  Pending II 1 Interrupt                               */
+#define SH_EVENT_OCCURRED_II_INT1_SHFT           30
+#define SH_EVENT_OCCURRED_II_INT1_MASK           0x0000000040000000
+
+/* ==================================================================== */
+/*                         LEDS                                         */
+/* ==================================================================== */
+#define SH1_REAL_JUNK_BUS_LED0			 0x7fed00000UL
+#define SH1_REAL_JUNK_BUS_LED1			 0x7fed10000UL
+#define SH1_REAL_JUNK_BUS_LED2			 0x7fed20000UL
+#define SH1_REAL_JUNK_BUS_LED3			 0x7fed30000UL
+
+#define SH2_REAL_JUNK_BUS_LED0			 0xf0000000UL
+#define SH2_REAL_JUNK_BUS_LED1			 0xf0010000UL
+#define SH2_REAL_JUNK_BUS_LED2			 0xf0020000UL
+#define SH2_REAL_JUNK_BUS_LED3			 0xf0030000UL
+
+/* ==================================================================== */
+/*                         Register "SH1_PTC_0"                         */
+/*       Puge Translation Cache Message Configuration Information       */
+/* ==================================================================== */
+#define SH1_PTC_0                                 0x00000001101a0000
+
+/*   SH1_PTC_0_A                                                        */
+/*   Description:  Type                                                 */
+#define SH1_PTC_0_A_SHFT                          0
+
+/*   SH1_PTC_0_PS                                                       */
+/*   Description:  Page Size                                            */
+#define SH1_PTC_0_PS_SHFT                         2
+
+/*   SH1_PTC_0_RID                                                      */
+/*   Description:  Region ID                                            */
+#define SH1_PTC_0_RID_SHFT                        8
+
+/*   SH1_PTC_0_START                                                    */
+/*   Description:  Start                                                */
+#define SH1_PTC_0_START_SHFT                      63
+
+/* ==================================================================== */
+/*                         Register "SH1_PTC_1"                         */
+/*       Puge Translation Cache Message Configuration Information       */
+/* ==================================================================== */
+#define SH1_PTC_1                                 0x00000001101a0080
+
+/*   SH1_PTC_1_START                                                    */
+/*   Description:  PTC_1 Start                                          */
+#define SH1_PTC_1_START_SHFT                      63
+
+
+/* ==================================================================== */
+/*                         Register "SH2_PTC"                           */
+/*       Puge Translation Cache Message Configuration Information       */
+/* ==================================================================== */
+#define SH2_PTC                                   0x0000000170000000
+
+/*   SH2_PTC_A                                                          */
+/*   Description:  Type                                                 */
+#define SH2_PTC_A_SHFT                            0
+
+/*   SH2_PTC_PS                                                         */
+/*   Description:  Page Size                                            */
+#define SH2_PTC_PS_SHFT                           2
+
+/*   SH2_PTC_RID                                                      */
+/*   Description:  Region ID                                            */
+#define SH2_PTC_RID_SHFT                          4
+
+/*   SH2_PTC_START                                                      */
+/*   Description:  Start                                                */
+#define SH2_PTC_START_SHFT                        63
+
+/*   SH2_PTC_ADDR_RID                                                   */
+/*   Description:  Region ID                                            */
+#define SH2_PTC_ADDR_SHFT                         4
+#define SH2_PTC_ADDR_MASK                         0x1ffffffffffff000
+
+/* ==================================================================== */
+/*                    Register "SH_RTC1_INT_CONFIG"                     */
+/*                SHub RTC 1 Interrupt Config Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC1_INT_CONFIG                      0x0000000110001480
+#define SH2_RTC1_INT_CONFIG                      0x0000000010001480
+#define SH_RTC1_INT_CONFIG_MASK                  0x0ff3ffffffefffff
+#define SH_RTC1_INT_CONFIG_INIT                  0x0000000000000000
+
+/*   SH_RTC1_INT_CONFIG_TYPE                                            */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_RTC1_INT_CONFIG_TYPE_SHFT             0
+#define SH_RTC1_INT_CONFIG_TYPE_MASK             0x0000000000000007
+
+/*   SH_RTC1_INT_CONFIG_AGT                                             */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_RTC1_INT_CONFIG_AGT_SHFT              3
+#define SH_RTC1_INT_CONFIG_AGT_MASK              0x0000000000000008
+
+/*   SH_RTC1_INT_CONFIG_PID                                             */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_RTC1_INT_CONFIG_PID_SHFT              4
+#define SH_RTC1_INT_CONFIG_PID_MASK              0x00000000000ffff0
+
+/*   SH_RTC1_INT_CONFIG_BASE                                            */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_RTC1_INT_CONFIG_BASE_SHFT             21
+#define SH_RTC1_INT_CONFIG_BASE_MASK             0x0003ffffffe00000
+
+/*   SH_RTC1_INT_CONFIG_IDX                                             */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_RTC1_INT_CONFIG_IDX_SHFT              52
+#define SH_RTC1_INT_CONFIG_IDX_MASK              0x0ff0000000000000
+
+/* ==================================================================== */
+/*                    Register "SH_RTC1_INT_ENABLE"                     */
+/*                SHub RTC 1 Interrupt Enable Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC1_INT_ENABLE                      0x0000000110001500
+#define SH2_RTC1_INT_ENABLE                      0x0000000010001500
+#define SH_RTC1_INT_ENABLE_MASK                  0x0000000000000001
+#define SH_RTC1_INT_ENABLE_INIT                  0x0000000000000000
+
+/*   SH_RTC1_INT_ENABLE_RTC1_ENABLE                                     */
+/*   Description:  Enable RTC 1 Interrupt                               */
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT      0
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK      0x0000000000000001
+
+/* ==================================================================== */
+/*                    Register "SH_RTC2_INT_CONFIG"                     */
+/*                SHub RTC 2 Interrupt Config Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC2_INT_CONFIG                      0x0000000110001580
+#define SH2_RTC2_INT_CONFIG                      0x0000000010001580
+#define SH_RTC2_INT_CONFIG_MASK                  0x0ff3ffffffefffff
+#define SH_RTC2_INT_CONFIG_INIT                  0x0000000000000000
+
+/*   SH_RTC2_INT_CONFIG_TYPE                                            */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_RTC2_INT_CONFIG_TYPE_SHFT             0
+#define SH_RTC2_INT_CONFIG_TYPE_MASK             0x0000000000000007
+
+/*   SH_RTC2_INT_CONFIG_AGT                                             */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_RTC2_INT_CONFIG_AGT_SHFT              3
+#define SH_RTC2_INT_CONFIG_AGT_MASK              0x0000000000000008
+
+/*   SH_RTC2_INT_CONFIG_PID                                             */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_RTC2_INT_CONFIG_PID_SHFT              4
+#define SH_RTC2_INT_CONFIG_PID_MASK              0x00000000000ffff0
+
+/*   SH_RTC2_INT_CONFIG_BASE                                            */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_RTC2_INT_CONFIG_BASE_SHFT             21
+#define SH_RTC2_INT_CONFIG_BASE_MASK             0x0003ffffffe00000
+
+/*   SH_RTC2_INT_CONFIG_IDX                                             */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_RTC2_INT_CONFIG_IDX_SHFT              52
+#define SH_RTC2_INT_CONFIG_IDX_MASK              0x0ff0000000000000
+
+/* ==================================================================== */
+/*                    Register "SH_RTC2_INT_ENABLE"                     */
+/*                SHub RTC 2 Interrupt Enable Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC2_INT_ENABLE                      0x0000000110001600
+#define SH2_RTC2_INT_ENABLE                      0x0000000010001600
+#define SH_RTC2_INT_ENABLE_MASK                  0x0000000000000001
+#define SH_RTC2_INT_ENABLE_INIT                  0x0000000000000000
+
+/*   SH_RTC2_INT_ENABLE_RTC2_ENABLE                                     */
+/*   Description:  Enable RTC 2 Interrupt                               */
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT      0
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK      0x0000000000000001
+
+/* ==================================================================== */
+/*                    Register "SH_RTC3_INT_CONFIG"                     */
+/*                SHub RTC 3 Interrupt Config Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC3_INT_CONFIG                      0x0000000110001680
+#define SH2_RTC3_INT_CONFIG                      0x0000000010001680
+#define SH_RTC3_INT_CONFIG_MASK                  0x0ff3ffffffefffff
+#define SH_RTC3_INT_CONFIG_INIT                  0x0000000000000000
+
+/*   SH_RTC3_INT_CONFIG_TYPE                                            */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_RTC3_INT_CONFIG_TYPE_SHFT             0
+#define SH_RTC3_INT_CONFIG_TYPE_MASK             0x0000000000000007
+
+/*   SH_RTC3_INT_CONFIG_AGT                                             */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_RTC3_INT_CONFIG_AGT_SHFT              3
+#define SH_RTC3_INT_CONFIG_AGT_MASK              0x0000000000000008
+
+/*   SH_RTC3_INT_CONFIG_PID                                             */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_RTC3_INT_CONFIG_PID_SHFT              4
+#define SH_RTC3_INT_CONFIG_PID_MASK              0x00000000000ffff0
+
+/*   SH_RTC3_INT_CONFIG_BASE                                            */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_RTC3_INT_CONFIG_BASE_SHFT             21
+#define SH_RTC3_INT_CONFIG_BASE_MASK             0x0003ffffffe00000
+
+/*   SH_RTC3_INT_CONFIG_IDX                                             */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_RTC3_INT_CONFIG_IDX_SHFT              52
+#define SH_RTC3_INT_CONFIG_IDX_MASK              0x0ff0000000000000
+
+/* ==================================================================== */
+/*                    Register "SH_RTC3_INT_ENABLE"                     */
+/*                SHub RTC 3 Interrupt Enable Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC3_INT_ENABLE                      0x0000000110001700
+#define SH2_RTC3_INT_ENABLE                      0x0000000010001700
+#define SH_RTC3_INT_ENABLE_MASK                  0x0000000000000001
+#define SH_RTC3_INT_ENABLE_INIT                  0x0000000000000000
+
+/*   SH_RTC3_INT_ENABLE_RTC3_ENABLE                                     */
+/*   Description:  Enable RTC 3 Interrupt                               */
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT      0
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK      0x0000000000000001
+
+/*   SH_EVENT_OCCURRED_RTC1_INT                                         */
+/*   Description:  Pending RTC 1 Interrupt                              */
+#define SH_EVENT_OCCURRED_RTC1_INT_SHFT          24
+#define SH_EVENT_OCCURRED_RTC1_INT_MASK          0x0000000001000000
+
+/*   SH_EVENT_OCCURRED_RTC2_INT                                         */
+/*   Description:  Pending RTC 2 Interrupt                              */
+#define SH_EVENT_OCCURRED_RTC2_INT_SHFT          25
+#define SH_EVENT_OCCURRED_RTC2_INT_MASK          0x0000000002000000
+
+/*   SH_EVENT_OCCURRED_RTC3_INT                                         */
+/*   Description:  Pending RTC 3 Interrupt                              */
+#define SH_EVENT_OCCURRED_RTC3_INT_SHFT          26
+#define SH_EVENT_OCCURRED_RTC3_INT_MASK          0x0000000004000000
+
+/* ==================================================================== */
+/*                        Register "SH_INT_CMPB"                        */
+/*                  RTC Compare Value for Processor B                   */
+/* ==================================================================== */
+
+#define SH1_INT_CMPB                             0x00000001101b0080
+#define SH2_INT_CMPB                             0x00000000101b0080
+#define SH_INT_CMPB_MASK                         0x007fffffffffffff
+#define SH_INT_CMPB_INIT                         0x0000000000000000
+
+/*   SH_INT_CMPB_REAL_TIME_CMPB                                         */
+/*   Description:  Real Time Clock Compare                              */
+#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT          0
+#define SH_INT_CMPB_REAL_TIME_CMPB_MASK          0x007fffffffffffff
+
+/* ==================================================================== */
+/*                        Register "SH_INT_CMPC"                        */
+/*                  RTC Compare Value for Processor C                   */
+/* ==================================================================== */
+
+#define SH1_INT_CMPC                             0x00000001101b0100
+#define SH2_INT_CMPC                             0x00000000101b0100
+#define SH_INT_CMPC_MASK                         0x007fffffffffffff
+#define SH_INT_CMPC_INIT                         0x0000000000000000
+
+/*   SH_INT_CMPC_REAL_TIME_CMPC                                         */
+/*   Description:  Real Time Clock Compare                              */
+#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT          0
+#define SH_INT_CMPC_REAL_TIME_CMPC_MASK          0x007fffffffffffff
+
+/* ==================================================================== */
+/*                        Register "SH_INT_CMPD"                        */
+/*                  RTC Compare Value for Processor D                   */
+/* ==================================================================== */
+
+#define SH1_INT_CMPD                             0x00000001101b0180
+#define SH2_INT_CMPD                             0x00000000101b0180
+#define SH_INT_CMPD_MASK                         0x007fffffffffffff
+#define SH_INT_CMPD_INIT                         0x0000000000000000
+
+/*   SH_INT_CMPD_REAL_TIME_CMPD                                         */
+/*   Description:  Real Time Clock Compare                              */
+#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT          0
+#define SH_INT_CMPD_REAL_TIME_CMPD_MASK          0x007fffffffffffff
+
+
+/* ==================================================================== */
+/* Some MMRs are functionally identical (or close enough) on both SHUB1 */
+/* and SHUB2 that it makes sense to define a geberic name for the MMR.  */
+/* It is acceptible to use (for example) SH_IPI_INT to reference the    */
+/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based  */
+/* on the type of the SHUB. Do not use these #defines in performance    */
+/* critical code  or loops - there is a small performance penalty.      */
+/* ==================================================================== */
+#define shubmmr(a,b) 		(is_shub2() ? a##2_##b : a##1_##b)
+
+#define SH_REAL_JUNK_BUS_LED0	shubmmr(SH, REAL_JUNK_BUS_LED0)
+#define SH_IPI_INT		shubmmr(SH, IPI_INT)
+#define SH_EVENT_OCCURRED	shubmmr(SH, EVENT_OCCURRED)
+#define SH_EVENT_OCCURRED_ALIAS	shubmmr(SH, EVENT_OCCURRED_ALIAS)
+#define SH_RTC			shubmmr(SH, RTC)
+#define SH_RTC1_INT_CONFIG	shubmmr(SH, RTC1_INT_CONFIG)
+#define SH_RTC1_INT_ENABLE	shubmmr(SH, RTC1_INT_ENABLE)
+#define SH_RTC2_INT_CONFIG	shubmmr(SH, RTC2_INT_CONFIG)
+#define SH_RTC2_INT_ENABLE	shubmmr(SH, RTC2_INT_ENABLE)
+#define SH_RTC3_INT_CONFIG	shubmmr(SH, RTC3_INT_CONFIG)
+#define SH_RTC3_INT_ENABLE	shubmmr(SH, RTC3_INT_ENABLE)
+#define SH_INT_CMPB		shubmmr(SH, INT_CMPB)
+#define SH_INT_CMPC		shubmmr(SH, INT_CMPC)
+#define SH_INT_CMPD		shubmmr(SH, INT_CMPD)
+
+#endif /* _ASM_IA64_SN_SHUB_MMR_H */
diff --git a/include/asm-ia64/sn/shubio.h b/include/asm-ia64/sn/shubio.h
new file mode 100644
index 000000000000..fbd880e6bb96
--- /dev/null
+++ b/include/asm-ia64/sn/shubio.h
@@ -0,0 +1,3476 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SHUBIO_H
+#define _ASM_IA64_SN_SHUBIO_H
+
+#define HUB_WIDGET_ID_MAX 0xf
+#define IIO_NUM_ITTES   7
+#define HUB_NUM_BIG_WINDOW      (IIO_NUM_ITTES - 1)
+
+#define    IIO_WID                   0x00400000    /* Crosstalk Widget Identification */
+                                                   /* This register is also accessible from
+                                                    * Crosstalk at address 0x0.  */
+#define    IIO_WSTAT                 0x00400008    /* Crosstalk Widget Status */
+#define    IIO_WCR                   0x00400020    /* Crosstalk Widget Control Register */
+#define    IIO_ILAPR                 0x00400100    /* IO Local Access Protection Register */
+#define    IIO_ILAPO                 0x00400108    /* IO Local Access Protection Override */
+#define    IIO_IOWA                  0x00400110    /* IO Outbound Widget Access */
+#define    IIO_IIWA                  0x00400118    /* IO Inbound Widget Access */
+#define    IIO_IIDEM                 0x00400120    /* IO Inbound Device Error Mask */
+#define    IIO_ILCSR                 0x00400128    /* IO LLP Control and Status Register */
+#define    IIO_ILLR                  0x00400130    /* IO LLP Log Register    */
+#define    IIO_IIDSR                 0x00400138    /* IO Interrupt Destination */
+
+#define    IIO_IGFX0                 0x00400140    /* IO Graphics Node-Widget Map 0 */
+#define    IIO_IGFX1                 0x00400148    /* IO Graphics Node-Widget Map 1 */
+
+#define    IIO_ISCR0                 0x00400150    /* IO Scratch Register 0 */
+#define    IIO_ISCR1                 0x00400158    /* IO Scratch Register 1 */
+
+#define    IIO_ITTE1                 0x00400160    /* IO Translation Table Entry 1 */
+#define    IIO_ITTE2                 0x00400168    /* IO Translation Table Entry 2 */
+#define    IIO_ITTE3                 0x00400170    /* IO Translation Table Entry 3 */
+#define    IIO_ITTE4                 0x00400178    /* IO Translation Table Entry 4 */
+#define    IIO_ITTE5                 0x00400180    /* IO Translation Table Entry 5 */
+#define    IIO_ITTE6                 0x00400188    /* IO Translation Table Entry 6 */
+#define    IIO_ITTE7                 0x00400190    /* IO Translation Table Entry 7 */
+
+#define    IIO_IPRB0                 0x00400198    /* IO PRB Entry 0         */
+#define    IIO_IPRB8                 0x004001A0    /* IO PRB Entry 8         */
+#define    IIO_IPRB9                 0x004001A8    /* IO PRB Entry 9         */
+#define    IIO_IPRBA                 0x004001B0    /* IO PRB Entry A         */
+#define    IIO_IPRBB                 0x004001B8    /* IO PRB Entry B         */
+#define    IIO_IPRBC                 0x004001C0    /* IO PRB Entry C         */
+#define    IIO_IPRBD                 0x004001C8    /* IO PRB Entry D         */
+#define    IIO_IPRBE                 0x004001D0    /* IO PRB Entry E         */
+#define    IIO_IPRBF                 0x004001D8    /* IO PRB Entry F         */
+
+#define    IIO_IXCC                  0x004001E0    /* IO Crosstalk Credit Count Timeout */
+#define    IIO_IMEM                  0x004001E8    /* IO Miscellaneous Error Mask */
+#define    IIO_IXTT                  0x004001F0    /* IO Crosstalk Timeout Threshold */
+#define    IIO_IECLR                 0x004001F8    /* IO Error Clear Register */
+#define    IIO_IBCR                  0x00400200    /* IO BTE Control Register */
+
+#define    IIO_IXSM                  0x00400208    /* IO Crosstalk Spurious Message */
+#define    IIO_IXSS                  0x00400210    /* IO Crosstalk Spurious Sideband */
+
+#define    IIO_ILCT                  0x00400218    /* IO LLP Channel Test    */
+
+#define    IIO_IIEPH1                0x00400220    /* IO Incoming Error Packet Header, Part 1 */
+#define    IIO_IIEPH2                0x00400228    /* IO Incoming Error Packet Header, Part 2 */
+
+
+#define    IIO_ISLAPR                0x00400230    /* IO SXB Local Access Protection Regster */
+#define    IIO_ISLAPO                0x00400238    /* IO SXB Local Access Protection Override */
+
+#define    IIO_IWI                   0x00400240    /* IO Wrapper Interrupt Register */
+#define    IIO_IWEL                  0x00400248    /* IO Wrapper Error Log Register */
+#define    IIO_IWC                   0x00400250    /* IO Wrapper Control Register */
+#define    IIO_IWS                   0x00400258    /* IO Wrapper Status Register */
+#define    IIO_IWEIM                 0x00400260    /* IO Wrapper Error Interrupt Masking Register */
+
+#define    IIO_IPCA                  0x00400300    /* IO PRB Counter Adjust */
+
+#define    IIO_IPRTE0_A              0x00400308    /* IO PIO Read Address Table Entry 0, Part A */
+#define    IIO_IPRTE1_A              0x00400310    /* IO PIO Read Address Table Entry 1, Part A */
+#define    IIO_IPRTE2_A              0x00400318    /* IO PIO Read Address Table Entry 2, Part A */
+#define    IIO_IPRTE3_A               0x00400320    /* IO PIO Read Address Table Entry 3, Part A */
+#define    IIO_IPRTE4_A               0x00400328    /* IO PIO Read Address Table Entry 4, Part A */
+#define    IIO_IPRTE5_A               0x00400330    /* IO PIO Read Address Table Entry 5, Part A */
+#define    IIO_IPRTE6_A               0x00400338    /* IO PIO Read Address Table Entry 6, Part A */
+#define    IIO_IPRTE7_A               0x00400340    /* IO PIO Read Address Table Entry 7, Part A */
+
+#define    IIO_IPRTE0_B              0x00400348    /* IO PIO Read Address Table Entry 0, Part B */
+#define    IIO_IPRTE1_B              0x00400350    /* IO PIO Read Address Table Entry 1, Part B */
+#define    IIO_IPRTE2_B              0x00400358    /* IO PIO Read Address Table Entry 2, Part B */
+#define    IIO_IPRTE3_B               0x00400360    /* IO PIO Read Address Table Entry 3, Part B */
+#define    IIO_IPRTE4_B               0x00400368    /* IO PIO Read Address Table Entry 4, Part B */
+#define    IIO_IPRTE5_B               0x00400370    /* IO PIO Read Address Table Entry 5, Part B */
+#define    IIO_IPRTE6_B               0x00400378    /* IO PIO Read Address Table Entry 6, Part B */
+#define    IIO_IPRTE7_B               0x00400380    /* IO PIO Read Address Table Entry 7, Part B */
+
+#define    IIO_IPDR                  0x00400388    /* IO PIO Deallocation Register */
+#define    IIO_ICDR                  0x00400390    /* IO CRB Entry Deallocation Register */
+#define    IIO_IFDR                  0x00400398    /* IO IOQ FIFO Depth Register */
+#define    IIO_IIAP                  0x004003A0    /* IO IIQ Arbitration Parameters */
+#define    IIO_ICMR                  0x004003A8    /* IO CRB Management Register */
+#define    IIO_ICCR                  0x004003B0    /* IO CRB Control Register */
+#define    IIO_ICTO                  0x004003B8    /* IO CRB Timeout         */
+#define    IIO_ICTP                  0x004003C0    /* IO CRB Timeout Prescalar */
+
+#define    IIO_ICRB0_A               0x00400400    /* IO CRB Entry 0_A       */
+#define    IIO_ICRB0_B               0x00400408    /* IO CRB Entry 0_B       */
+#define    IIO_ICRB0_C               0x00400410    /* IO CRB Entry 0_C       */
+#define    IIO_ICRB0_D               0x00400418    /* IO CRB Entry 0_D       */
+#define    IIO_ICRB0_E               0x00400420    /* IO CRB Entry 0_E       */
+
+#define    IIO_ICRB1_A               0x00400430    /* IO CRB Entry 1_A       */
+#define    IIO_ICRB1_B               0x00400438    /* IO CRB Entry 1_B       */
+#define    IIO_ICRB1_C               0x00400440    /* IO CRB Entry 1_C       */
+#define    IIO_ICRB1_D               0x00400448    /* IO CRB Entry 1_D       */
+#define    IIO_ICRB1_E               0x00400450    /* IO CRB Entry 1_E       */
+
+#define    IIO_ICRB2_A               0x00400460    /* IO CRB Entry 2_A       */
+#define    IIO_ICRB2_B               0x00400468    /* IO CRB Entry 2_B       */
+#define    IIO_ICRB2_C               0x00400470    /* IO CRB Entry 2_C       */
+#define    IIO_ICRB2_D               0x00400478    /* IO CRB Entry 2_D       */
+#define    IIO_ICRB2_E               0x00400480    /* IO CRB Entry 2_E       */
+
+#define    IIO_ICRB3_A               0x00400490    /* IO CRB Entry 3_A       */
+#define    IIO_ICRB3_B               0x00400498    /* IO CRB Entry 3_B       */
+#define    IIO_ICRB3_C               0x004004a0    /* IO CRB Entry 3_C       */
+#define    IIO_ICRB3_D               0x004004a8    /* IO CRB Entry 3_D       */
+#define    IIO_ICRB3_E               0x004004b0    /* IO CRB Entry 3_E       */
+
+#define    IIO_ICRB4_A               0x004004c0    /* IO CRB Entry 4_A       */
+#define    IIO_ICRB4_B               0x004004c8    /* IO CRB Entry 4_B       */
+#define    IIO_ICRB4_C               0x004004d0    /* IO CRB Entry 4_C       */
+#define    IIO_ICRB4_D               0x004004d8    /* IO CRB Entry 4_D       */
+#define    IIO_ICRB4_E               0x004004e0    /* IO CRB Entry 4_E       */
+
+#define    IIO_ICRB5_A               0x004004f0    /* IO CRB Entry 5_A       */
+#define    IIO_ICRB5_B               0x004004f8    /* IO CRB Entry 5_B       */
+#define    IIO_ICRB5_C               0x00400500    /* IO CRB Entry 5_C       */
+#define    IIO_ICRB5_D               0x00400508    /* IO CRB Entry 5_D       */
+#define    IIO_ICRB5_E               0x00400510    /* IO CRB Entry 5_E       */
+
+#define    IIO_ICRB6_A               0x00400520    /* IO CRB Entry 6_A       */
+#define    IIO_ICRB6_B               0x00400528    /* IO CRB Entry 6_B       */
+#define    IIO_ICRB6_C               0x00400530    /* IO CRB Entry 6_C       */
+#define    IIO_ICRB6_D               0x00400538    /* IO CRB Entry 6_D       */
+#define    IIO_ICRB6_E               0x00400540    /* IO CRB Entry 6_E       */
+
+#define    IIO_ICRB7_A               0x00400550    /* IO CRB Entry 7_A       */
+#define    IIO_ICRB7_B               0x00400558    /* IO CRB Entry 7_B       */
+#define    IIO_ICRB7_C               0x00400560    /* IO CRB Entry 7_C       */
+#define    IIO_ICRB7_D               0x00400568    /* IO CRB Entry 7_D       */
+#define    IIO_ICRB7_E               0x00400570    /* IO CRB Entry 7_E       */
+
+#define    IIO_ICRB8_A               0x00400580    /* IO CRB Entry 8_A       */
+#define    IIO_ICRB8_B               0x00400588    /* IO CRB Entry 8_B       */
+#define    IIO_ICRB8_C               0x00400590    /* IO CRB Entry 8_C       */
+#define    IIO_ICRB8_D               0x00400598    /* IO CRB Entry 8_D       */
+#define    IIO_ICRB8_E               0x004005a0    /* IO CRB Entry 8_E       */
+
+#define    IIO_ICRB9_A               0x004005b0    /* IO CRB Entry 9_A       */
+#define    IIO_ICRB9_B               0x004005b8    /* IO CRB Entry 9_B       */
+#define    IIO_ICRB9_C               0x004005c0    /* IO CRB Entry 9_C       */
+#define    IIO_ICRB9_D               0x004005c8    /* IO CRB Entry 9_D       */
+#define    IIO_ICRB9_E               0x004005d0    /* IO CRB Entry 9_E       */
+
+#define    IIO_ICRBA_A               0x004005e0    /* IO CRB Entry A_A       */
+#define    IIO_ICRBA_B               0x004005e8    /* IO CRB Entry A_B       */
+#define    IIO_ICRBA_C               0x004005f0    /* IO CRB Entry A_C       */
+#define    IIO_ICRBA_D               0x004005f8    /* IO CRB Entry A_D       */
+#define    IIO_ICRBA_E               0x00400600    /* IO CRB Entry A_E       */
+
+#define    IIO_ICRBB_A               0x00400610    /* IO CRB Entry B_A       */
+#define    IIO_ICRBB_B               0x00400618    /* IO CRB Entry B_B       */
+#define    IIO_ICRBB_C               0x00400620    /* IO CRB Entry B_C       */
+#define    IIO_ICRBB_D               0x00400628    /* IO CRB Entry B_D       */
+#define    IIO_ICRBB_E               0x00400630    /* IO CRB Entry B_E       */
+
+#define    IIO_ICRBC_A               0x00400640    /* IO CRB Entry C_A       */
+#define    IIO_ICRBC_B               0x00400648    /* IO CRB Entry C_B       */
+#define    IIO_ICRBC_C               0x00400650    /* IO CRB Entry C_C       */
+#define    IIO_ICRBC_D               0x00400658    /* IO CRB Entry C_D       */
+#define    IIO_ICRBC_E               0x00400660    /* IO CRB Entry C_E       */
+
+#define    IIO_ICRBD_A               0x00400670    /* IO CRB Entry D_A       */
+#define    IIO_ICRBD_B               0x00400678    /* IO CRB Entry D_B       */
+#define    IIO_ICRBD_C               0x00400680    /* IO CRB Entry D_C       */
+#define    IIO_ICRBD_D               0x00400688    /* IO CRB Entry D_D       */
+#define    IIO_ICRBD_E               0x00400690    /* IO CRB Entry D_E       */
+
+#define    IIO_ICRBE_A               0x004006a0    /* IO CRB Entry E_A       */
+#define    IIO_ICRBE_B               0x004006a8    /* IO CRB Entry E_B       */
+#define    IIO_ICRBE_C               0x004006b0    /* IO CRB Entry E_C       */
+#define    IIO_ICRBE_D               0x004006b8    /* IO CRB Entry E_D       */
+#define    IIO_ICRBE_E               0x004006c0    /* IO CRB Entry E_E       */
+
+#define    IIO_ICSML                 0x00400700    /* IO CRB Spurious Message Low */
+#define    IIO_ICSMM                 0x00400708    /* IO CRB Spurious Message Middle */
+#define    IIO_ICSMH                 0x00400710    /* IO CRB Spurious Message High */
+
+#define    IIO_IDBSS                 0x00400718    /* IO Debug Submenu Select */
+
+#define    IIO_IBLS0                 0x00410000    /* IO BTE Length Status 0 */
+#define    IIO_IBSA0                 0x00410008    /* IO BTE Source Address 0 */
+#define    IIO_IBDA0                 0x00410010    /* IO BTE Destination Address 0 */
+#define    IIO_IBCT0                 0x00410018    /* IO BTE Control Terminate 0 */
+#define    IIO_IBNA0                 0x00410020    /* IO BTE Notification Address 0 */
+#define    IIO_IBIA0                 0x00410028    /* IO BTE Interrupt Address 0 */
+#define    IIO_IBLS1                 0x00420000    /* IO BTE Length Status 1 */
+#define    IIO_IBSA1                 0x00420008    /* IO BTE Source Address 1 */
+#define    IIO_IBDA1                 0x00420010    /* IO BTE Destination Address 1 */
+#define    IIO_IBCT1                 0x00420018    /* IO BTE Control Terminate 1 */
+#define    IIO_IBNA1                 0x00420020    /* IO BTE Notification Address 1 */
+#define    IIO_IBIA1                 0x00420028    /* IO BTE Interrupt Address 1 */
+
+#define    IIO_IPCR                  0x00430000    /* IO Performance Control */
+#define    IIO_IPPR                  0x00430008    /* IO Performance Profiling */
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register echoes some information from the         *
+ * LB_REV_ID register. It is available through Crosstalk as described   *
+ * above. The REV_NUM and MFG_NUM fields receive their values from      *
+ * the REVISION and MANUFACTURER fields in the LB_REV_ID register.      *
+ * The PART_NUM field's value is the Crosstalk device ID number that    *
+ * Steve Miller assigned to the SHub chip.                              *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_wid_u {
+	uint64_t	ii_wid_regval;
+	struct	{
+		uint64_t	w_rsvd_1		  :	 1;
+		uint64_t	w_mfg_num		  :	11;
+		uint64_t	w_part_num		  :	16;
+		uint64_t	w_rev_num		  :	 4;
+		uint64_t	w_rsvd			  :	32;
+	} ii_wid_fld_s;
+} ii_wid_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  The fields in this register are set upon detection of an error      *
+ * and cleared by various mechanisms, as explained in the               *
+ * description.                                                         *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_wstat_u {
+	uint64_t	ii_wstat_regval;
+	struct	{
+		uint64_t	w_pending		  :	 4;
+		uint64_t	w_xt_crd_to		  :	 1;
+		uint64_t	w_xt_tail_to		  :	 1;
+		uint64_t	w_rsvd_3		  :	 3;
+		uint64_t       w_tx_mx_rty               :      1;
+		uint64_t	w_rsvd_2		  :	 6;
+		uint64_t	w_llp_tx_cnt		  :	 8;
+		uint64_t	w_rsvd_1		  :	 8;
+		uint64_t	w_crazy			  :	 1;
+		uint64_t	w_rsvd			  :	31;
+	} ii_wstat_fld_s;
+} ii_wstat_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This is a read-write enabled register. It controls     *
+ * various aspects of the Crosstalk flow control.                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_wcr_u {
+	uint64_t	ii_wcr_regval;
+	struct	{
+		uint64_t	w_wid			  :	 4;
+		uint64_t	w_tag			  :	 1;
+		uint64_t	w_rsvd_1		  :	 8;
+		uint64_t	w_dst_crd		  :	 3;
+		uint64_t	w_f_bad_pkt		  :	 1;
+		uint64_t	w_dir_con		  :	 1;
+		uint64_t	w_e_thresh		  :	 5;
+		uint64_t	w_rsvd			  :	41;
+	} ii_wcr_fld_s;
+} ii_wcr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register's value is a bit vector that guards      *
+ * access to local registers within the II as well as to external       *
+ * Crosstalk widgets. Each bit in the register corresponds to a         *
+ * particular region in the system; a region consists of one, two or    *
+ * four nodes (depending on the value of the REGION_SIZE field in the   *
+ * LB_REV_ID register, which is documented in Section 8.3.1.1). The     *
+ * protection provided by this register applies to PIO read             *
+ * operations as well as PIO write operations. The II will perform a    *
+ * PIO read or write request only if the bit for the requestor's        *
+ * region is set; otherwise, the II will not perform the requested      *
+ * operation and will return an error response. When a PIO read or      *
+ * write request targets an external Crosstalk widget, then not only    *
+ * must the bit for the requestor's region be set in the ILAPR, but     *
+ * also the target widget's bit in the IOWA register must be set in     *
+ * order for the II to perform the requested operation; otherwise,      *
+ * the II will return an error response. Hence, the protection          *
+ * provided by the IOWA register supplements the protection provided    *
+ * by the ILAPR for requests that target external Crosstalk widgets.    *
+ * This register itself can be accessed only by the nodes whose         *
+ * region ID bits are enabled in this same register. It can also be     *
+ * accessed through the IAlias space by the local processors.           *
+ * The reset value of this register allows access by all nodes.         *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ilapr_u {
+	uint64_t	ii_ilapr_regval;
+	struct  {
+		uint64_t	i_region                  :	64;
+	} ii_ilapr_fld_s;
+} ii_ilapr_u_t;
+
+
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  A write to this register of the 64-bit value           *
+ * "SGIrules" in ASCII, will cause the bit in the ILAPR register        *
+ * corresponding to the region of the requestor to be set (allow        *
+ * access). A write of any other value will be ignored. Access          *
+ * protection for this register is "SGIrules".                          *
+ * This register can also be accessed through the IAlias space.         *
+ * However, this access will not change the access permissions in the   *
+ * ILAPR.                                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ilapo_u {
+	uint64_t	ii_ilapo_regval;
+	struct	{
+		uint64_t	i_io_ovrride            :	64;
+	} ii_ilapo_fld_s;
+} ii_ilapo_u_t;
+
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register qualifies all the PIO and Graphics writes launched    *
+ * from the SHUB towards a widget.                                      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iowa_u {
+	uint64_t	ii_iowa_regval;
+	struct	{
+		uint64_t	i_w0_oac		  :	 1;
+		uint64_t	i_rsvd_1		  :	 7;
+                uint64_t       i_wx_oac                  :      8;
+		uint64_t	i_rsvd			  :	48;
+	} ii_iowa_fld_s;
+} ii_iowa_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register qualifies all the requests launched      *
+ * from a widget towards the Shub. This register is intended to be      *
+ * used by software in case of misbehaving widgets.                     *
+ *                                                                      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iiwa_u {
+	uint64_t	ii_iiwa_regval;
+	struct  {
+		uint64_t	i_w0_iac                  :	 1;
+		uint64_t	i_rsvd_1		  :	 7;
+		uint64_t	i_wx_iac		  :	 8;
+		uint64_t	i_rsvd			  :	48;
+	} ii_iiwa_fld_s;
+} ii_iiwa_u_t;
+
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register qualifies all the operations launched    *
+ * from a widget towards the SHub. It allows individual access          *
+ * control for up to 8 devices per widget. A device refers to           *
+ * individual DMA master hosted by a widget.                            *
+ * The bits in each field of this register are cleared by the Shub      *
+ * upon detection of an error which requires the device to be           *
+ * disabled. These fields assume that 0=TNUM=7 (i.e., Bridge-centric    *
+ * Crosstalk). Whether or not a device has access rights to this        *
+ * Shub is determined by an AND of the device enable bit in the         *
+ * appropriate field of this register and the corresponding bit in      *
+ * the Wx_IAC field (for the widget which this device belongs to).      *
+ * The bits in this field are set by writing a 1 to them. Incoming      *
+ * replies from Crosstalk are not subject to this access control        *
+ * mechanism.                                                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iidem_u {
+	uint64_t	ii_iidem_regval;
+	struct	{
+		uint64_t	i_w8_dxs		  :	 8;
+		uint64_t	i_w9_dxs		  :	 8;
+		uint64_t	i_wa_dxs		  :	 8;
+		uint64_t	i_wb_dxs		  :	 8;
+		uint64_t	i_wc_dxs		  :	 8;
+		uint64_t	i_wd_dxs		  :	 8;
+		uint64_t	i_we_dxs		  :	 8;
+		uint64_t	i_wf_dxs		  :	 8;
+	} ii_iidem_fld_s;
+} ii_iidem_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the various programmable fields necessary    *
+ * for controlling and observing the LLP signals.                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ilcsr_u {
+	uint64_t	ii_ilcsr_regval;
+	struct  {
+		uint64_t	i_nullto                  :	 6;
+		uint64_t	i_rsvd_4		  :	 2;
+		uint64_t	i_wrmrst		  :	 1;
+		uint64_t	i_rsvd_3		  :	 1;
+		uint64_t	i_llp_en		  :	 1;
+		uint64_t	i_bm8			  :	 1;
+		uint64_t	i_llp_stat		  :	 2;
+		uint64_t	i_remote_power		  :	 1;
+		uint64_t	i_rsvd_2		  :	 1;
+		uint64_t	i_maxrtry		  :	10;
+		uint64_t	i_d_avail_sel		  :	 2;
+		uint64_t	i_rsvd_1		  :	 4;
+		uint64_t	i_maxbrst		  :	10;
+                uint64_t       i_rsvd                    :     22;
+
+	} ii_ilcsr_fld_s;
+} ii_ilcsr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This is simply a status registers that monitors the LLP error       *
+ * rate.                                                                *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_illr_u {
+	uint64_t	ii_illr_regval;
+	struct	{
+		uint64_t	i_sn_cnt		  :	16;
+		uint64_t	i_cb_cnt		  :	16;
+		uint64_t	i_rsvd			  :	32;
+	} ii_illr_fld_s;
+} ii_illr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  All II-detected non-BTE error interrupts are           *
+ * specified via this register.                                         *
+ * NOTE: The PI interrupt register address is hardcoded in the II. If   *
+ * PI_ID==0, then the II sends an interrupt request (Duplonet PWRI      *
+ * packet) to address offset 0x0180_0090 within the local register      *
+ * address space of PI0 on the node specified by the NODE field. If     *
+ * PI_ID==1, then the II sends the interrupt request to address         *
+ * offset 0x01A0_0090 within the local register address space of PI1    *
+ * on the node specified by the NODE field.                             *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iidsr_u {
+	uint64_t	ii_iidsr_regval;
+	struct  {
+		uint64_t	i_level                   :	 8;
+		uint64_t	i_pi_id			  :	 1;
+		uint64_t	i_node			  :	11;
+		uint64_t       i_rsvd_3                  :      4;
+		uint64_t	i_enable		  :	 1;
+		uint64_t	i_rsvd_2		  :	 3;
+		uint64_t	i_int_sent		  :	 2;
+		uint64_t       i_rsvd_1                  :      2;
+		uint64_t	i_pi0_forward_int	  :	 1;
+		uint64_t	i_pi1_forward_int	  :	 1;
+		uint64_t	i_rsvd			  :	30;
+	} ii_iidsr_fld_s;
+} ii_iidsr_u_t;
+
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are two instances of this register. This register is used     *
+ * for matching up the incoming responses from the graphics widget to   *
+ * the processor that initiated the graphics operation. The             *
+ * write-responses are converted to graphics credits and returned to    *
+ * the processor so that the processor interface can manage the flow    *
+ * control.                                                             *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_igfx0_u {
+	uint64_t	ii_igfx0_regval;
+	struct	{
+		uint64_t	i_w_num			  :	 4;
+		uint64_t       i_pi_id                   :      1;
+		uint64_t	i_n_num			  :	12;
+		uint64_t       i_p_num                   :      1;
+		uint64_t       i_rsvd                    :     46;
+	} ii_igfx0_fld_s;
+} ii_igfx0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are two instances of this register. This register is used     *
+ * for matching up the incoming responses from the graphics widget to   *
+ * the processor that initiated the graphics operation. The             *
+ * write-responses are converted to graphics credits and returned to    *
+ * the processor so that the processor interface can manage the flow    *
+ * control.                                                             *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_igfx1_u {
+	uint64_t	ii_igfx1_regval;
+	struct  {
+		uint64_t	i_w_num			  :	 4;
+		uint64_t       i_pi_id                   :      1;
+		uint64_t	i_n_num			  :	12;
+		uint64_t       i_p_num                   :      1;
+		uint64_t       i_rsvd                    :     46;
+	} ii_igfx1_fld_s;
+} ii_igfx1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are two instances of this registers. These registers are      *
+ * used as scratch registers for software use.                          *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iscr0_u {
+	uint64_t	ii_iscr0_regval;
+	struct  {
+		uint64_t	i_scratch                 :	64;
+	} ii_iscr0_fld_s;
+} ii_iscr0_u_t;
+
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are two instances of this registers. These registers are      *
+ * used as scratch registers for software use.                          *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iscr1_u {
+	uint64_t	ii_iscr1_regval;
+	struct  {
+		uint64_t	i_scratch                 :	64;
+	} ii_iscr1_fld_s;
+} ii_iscr1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the SHub is thus the lower 16 GBytes per widget       * 
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte1_u {
+	uint64_t	ii_itte1_regval;
+	struct  {
+		uint64_t	i_offset                  :	 5;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_w_num			  :	 4;
+		uint64_t	i_iosp			  :	 1;
+		uint64_t	i_rsvd			  :	51;
+	} ii_itte1_fld_s;
+} ii_itte1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte2_u {
+	uint64_t	ii_itte2_regval;
+	struct	{
+		uint64_t	i_offset		  :	 5;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_w_num			  :	 4;
+		uint64_t	i_iosp			  :	 1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_itte2_fld_s;
+} ii_itte2_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the SHub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte3_u {
+	uint64_t	ii_itte3_regval;
+	struct  {
+		uint64_t	i_offset                  :	 5;
+		uint64_t       i_rsvd_1                  :      3;
+		uint64_t       i_w_num                   :      4;
+		uint64_t       i_iosp                    :      1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_itte3_fld_s;
+} ii_itte3_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a SHub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the SHub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the SHub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte4_u {
+	uint64_t	ii_itte4_regval;
+	struct  {
+		uint64_t	i_offset                  :	 5;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t       i_w_num                   :      4;
+		uint64_t       i_iosp                    :      1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_itte4_fld_s;
+} ii_itte4_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a SHub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte5_u {
+	uint64_t	ii_itte5_regval;
+	struct  {
+		uint64_t	i_offset                  :	 5;
+		uint64_t       i_rsvd_1                  :      3;
+		uint64_t       i_w_num                   :      4;
+		uint64_t       i_iosp                    :      1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_itte5_fld_s;
+} ii_itte5_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte6_u {
+	uint64_t	ii_itte6_regval;
+	struct  {
+		uint64_t	i_offset                  :	 5;
+		uint64_t       i_rsvd_1                  :      3;
+		uint64_t       i_w_num                   :      4;
+		uint64_t       i_iosp                    :      1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_itte6_fld_s;
+} ii_itte6_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the SHub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_itte7_u {
+	uint64_t	ii_itte7_regval;
+	struct  {
+		uint64_t	i_offset                  :	 5;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t       i_w_num                   :      4;
+		uint64_t       i_iosp                    :      1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_itte7_fld_s;
+} ii_itte7_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprb0_u {
+	uint64_t	ii_iprb0_regval;
+	struct  {
+		uint64_t	i_c                       :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t       i_rsvd_2                  :      2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprb0_fld_s;
+} ii_iprb0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprb8_u {
+	uint64_t	ii_iprb8_regval;
+	struct  {
+		uint64_t	i_c                       :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t       i_rsvd_2                  :      2;
+		uint64_t	i_nb			  :	14;
+		uint64_t       i_rsvd_1                  :      2;
+		uint64_t       i_m                       :      2;
+		uint64_t       i_f                       :      1;
+		uint64_t       i_of_cnt                  :      5;
+		uint64_t       i_error                   :      1;
+		uint64_t       i_rd_to                   :      1;
+		uint64_t       i_spur_wr                 :      1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t       i_rsvd                    :     11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprb8_fld_s;
+} ii_iprb8_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprb9_u {
+	uint64_t	ii_iprb9_regval;
+	struct	{
+		uint64_t	i_c			  :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t	i_rsvd_2		  :	 2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprb9_fld_s;
+} ii_iprb9_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.        *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ *                                                                      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprba_u {
+	uint64_t	ii_iprba_regval;
+	struct  {
+		uint64_t	i_c                       :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t       i_rsvd_2                  :      2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprba_fld_s;
+} ii_iprba_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprbb_u {
+	uint64_t	ii_iprbb_regval;
+	struct	{
+		uint64_t	i_c			  :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t	i_rsvd_2		  :	 2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprbb_fld_s;
+} ii_iprbb_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprbc_u {
+	uint64_t	ii_iprbc_regval;
+	struct	{
+		uint64_t	i_c			  :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t	i_rsvd_2		  :	 2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprbc_fld_s;
+} ii_iprbc_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprbd_u {
+	uint64_t	ii_iprbd_regval;
+	struct	{
+		uint64_t	i_c			  :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t	i_rsvd_2		  :	 2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprbd_fld_s;
+} ii_iprbd_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprbe_u {
+	uint64_t	ii_iprbe_regval;
+	struct	{
+		uint64_t	i_c			  :	 8;
+		uint64_t	i_na			  :	14;
+		uint64_t	i_rsvd_2		  :	 2;
+		uint64_t	i_nb			  :	14;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_m			  :	 2;
+		uint64_t	i_f			  :	 1;
+		uint64_t	i_of_cnt		  :	 5;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rd_to			  :	 1;
+		uint64_t	i_spur_wr		  :	 1;
+		uint64_t	i_spur_rd		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+		uint64_t	i_mult_err		  :	 1;
+	} ii_iprbe_fld_s;
+} ii_iprbe_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of Shub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .                                                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprbf_u {
+        uint64_t       ii_iprbf_regval;
+        struct  {
+                uint64_t       i_c                       :      8;
+                uint64_t       i_na                      :     14;
+                uint64_t       i_rsvd_2                  :      2;
+                uint64_t       i_nb                      :     14;
+                uint64_t       i_rsvd_1                  :      2;
+                uint64_t       i_m                       :      2;
+                uint64_t       i_f                       :      1;
+                uint64_t       i_of_cnt                  :      5;
+                uint64_t       i_error                   :      1;
+                uint64_t       i_rd_to                   :      1;
+                uint64_t       i_spur_wr                 :      1;
+                uint64_t       i_spur_rd                 :      1;
+                uint64_t       i_rsvd                    :     11;
+                uint64_t       i_mult_err                :      1;
+        } ii_iprbe_fld_s;
+} ii_iprbf_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register specifies the timeout value to use for monitoring     *
+ * Crosstalk credits which are used outbound to Crosstalk. An           *
+ * internal counter called the Crosstalk Credit Timeout Counter         *
+ * increments every 128 II clocks. The counter starts counting          *
+ * anytime the credit count drops below a threshold, and resets to      *
+ * zero (stops counting) anytime the credit count is at or above the    *
+ * threshold. The threshold is 1 credit in direct connect mode and 2    *
+ * in Crossbow connect mode. When the internal Crosstalk Credit         *
+ * Timeout Counter reaches the value programmed in this register, a     *
+ * Crosstalk Credit Timeout has occurred. The internal counter is not   *
+ * readable from software, and stops counting at its maximum value,     *
+ * so it cannot cause more than one interrupt.                          *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ixcc_u {
+	uint64_t	ii_ixcc_regval;
+	struct  {
+		uint64_t	i_time_out                :	26;
+		uint64_t	i_rsvd			  :	38;
+	} ii_ixcc_fld_s;
+} ii_ixcc_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register qualifies all the PIO and DMA            *
+ * operations launched from widget 0 towards the SHub. In               *
+ * addition, it also qualifies accesses by the BTE streams.             *
+ * The bits in each field of this register are cleared by the SHub      *
+ * upon detection of an error which requires widget 0 or the BTE        *
+ * streams to be terminated. Whether or not widget x has access         *
+ * rights to this SHub is determined by an AND of the device            *
+ * enable bit in the appropriate field of this register and bit 0 in    *
+ * the Wx_IAC field. The bits in this field are set by writing a 1 to   *
+ * them. Incoming replies from Crosstalk are not subject to this        *
+ * access control mechanism.                                            *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_imem_u {
+	uint64_t	ii_imem_regval;
+	struct  {
+		uint64_t	i_w0_esd                  :	 1;
+		uint64_t	i_rsvd_3		  :	 3;
+		uint64_t	i_b0_esd		  :	 1;
+		uint64_t	i_rsvd_2		  :	 3;
+		uint64_t	i_b1_esd		  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_clr_precise		  :	 1;
+		uint64_t       i_rsvd                    :     51;
+	} ii_imem_fld_s;
+} ii_imem_u_t;
+
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register specifies the timeout value to use for   *
+ * monitoring Crosstalk tail flits coming into the Shub in the          *
+ * TAIL_TO field. An internal counter associated with this register     *
+ * is incremented every 128 II internal clocks (7 bits). The counter    *
+ * starts counting anytime a header micropacket is received and stops   *
+ * counting (and resets to zero) any time a micropacket with a Tail     *
+ * bit is received. Once the counter reaches the threshold value        *
+ * programmed in this register, it generates an interrupt to the        *
+ * processor that is programmed into the IIDSR. The counter saturates   *
+ * (does not roll over) at its maximum value, so it cannot cause        *
+ * another interrupt until after it is cleared.                         *
+ * The register also contains the Read Response Timeout values. The     *
+ * Prescalar is 23 bits, and counts II clocks. An internal counter      *
+ * increments on every II clock and when it reaches the value in the    *
+ * Prescalar field, all IPRTE registers with their valid bits set       *
+ * have their Read Response timers bumped. Whenever any of them match   *
+ * the value in the RRSP_TO field, a Read Response Timeout has          *
+ * occurred, and error handling occurs as described in the Error        *
+ * Handling section of this document.                                   *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ixtt_u {
+	uint64_t	ii_ixtt_regval;
+	struct  {
+		uint64_t	i_tail_to                 :	26;
+		uint64_t	i_rsvd_1		  :	 6;
+		uint64_t	i_rrsp_ps		  :	23;
+		uint64_t	i_rrsp_to		  :	 5;
+		uint64_t	i_rsvd			  :	 4;
+	} ii_ixtt_fld_s;
+} ii_ixtt_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  Writing a 1 to the fields of this register clears the appropriate   *
+ * error bits in other areas of SHub. Note that when the                *
+ * E_PRB_x bits are used to clear error bits in PRB registers,          *
+ * SPUR_RD and SPUR_WR may persist, because they require additional     *
+ * action to clear them. See the IPRBx and IXSS Register                *
+ * specifications.                                                      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ieclr_u {
+	uint64_t	ii_ieclr_regval;
+	struct  {
+		uint64_t	i_e_prb_0                 :	 1;
+		uint64_t	i_rsvd			  :	 7;
+		uint64_t	i_e_prb_8		  :	 1;
+		uint64_t	i_e_prb_9		  :	 1;
+		uint64_t	i_e_prb_a		  :	 1;
+		uint64_t	i_e_prb_b		  :	 1;
+		uint64_t	i_e_prb_c		  :	 1;
+		uint64_t	i_e_prb_d		  :	 1;
+		uint64_t	i_e_prb_e		  :	 1;
+		uint64_t	i_e_prb_f		  :	 1;
+		uint64_t	i_e_crazy		  :	 1;
+		uint64_t	i_e_bte_0		  :	 1;
+		uint64_t	i_e_bte_1		  :	 1;
+		uint64_t	i_reserved_1		  :	10;
+		uint64_t	i_spur_rd_hdr		  :	 1;
+		uint64_t	i_cam_intr_to		  :	 1;
+		uint64_t	i_cam_overflow		  :	 1;
+		uint64_t	i_cam_read_miss		  :	 1;
+		uint64_t	i_ioq_rep_underflow	  :	 1;
+		uint64_t	i_ioq_req_underflow	  :	 1;
+		uint64_t	i_ioq_rep_overflow	  :	 1;
+		uint64_t	i_ioq_req_overflow	  :	 1;
+		uint64_t	i_iiq_rep_overflow	  :	 1;
+		uint64_t	i_iiq_req_overflow	  :	 1;
+		uint64_t	i_ii_xn_rep_cred_overflow :	 1;
+		uint64_t	i_ii_xn_req_cred_overflow :	 1;
+		uint64_t	i_ii_xn_invalid_cmd	  :	 1;
+		uint64_t	i_xn_ii_invalid_cmd	  :	 1;
+		uint64_t	i_reserved_2		  :	21;
+	} ii_ieclr_fld_s;
+} ii_ieclr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register controls both BTEs. SOFT_RESET is intended for        *
+ * recovery after an error. COUNT controls the total number of CRBs     *
+ * that both BTEs (combined) can use, which affects total BTE           *
+ * bandwidth.                                                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibcr_u {
+	uint64_t	ii_ibcr_regval;
+	struct  {
+		uint64_t	i_count                   :	 4;
+		uint64_t	i_rsvd_1		  :	 4;
+		uint64_t	i_soft_reset		  :	 1;
+		uint64_t	i_rsvd			  :	55;
+	} ii_ibcr_fld_s;
+} ii_ibcr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the header of a spurious read response       *
+ * received from Crosstalk. A spurious read response is defined as a    *
+ * read response received by II from a widget for which (1) the SIDN    *
+ * has a value between 1 and 7, inclusive (II never sends requests to   *
+ * these widgets (2) there is no valid IPRTE register which             *
+ * corresponds to the TNUM, or (3) the widget indicated in SIDN is      *
+ * not the same as the widget recorded in the IPRTE register            *
+ * referenced by the TNUM. If this condition is true, and if the        *
+ * IXSS[VALID] bit is clear, then the header of the spurious read       *
+ * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The    *
+ * errant header is thereby captured, and no further spurious read      *
+ * respones are captured until IXSS[VALID] is cleared by setting the    *
+ * appropriate bit in IECLR.Everytime a spurious read response is       *
+ * detected, the SPUR_RD bit of the PRB corresponding to the incoming   *
+ * message's SIDN field is set. This always happens, regarless of       *
+ * whether a header is captured. The programmer should check            *
+ * IXSM[SIDN] to determine which widget sent the spurious response,     *
+ * because there may be more than one SPUR_RD bit set in the PRB        *
+ * registers. The widget indicated by IXSM[SIDN] was the first          *
+ * spurious read response to be received since the last time            *
+ * IXSS[VALID] was clear. The SPUR_RD bit of the corresponding PRB      *
+ * will be set. Any SPUR_RD bits in any other PRB registers indicate    *
+ * spurious messages from other widets which were detected after the    *
+ * header was captured..                                                *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ixsm_u {
+	uint64_t	ii_ixsm_regval;
+	struct  {
+		uint64_t	i_byte_en                 :	32;
+		uint64_t	i_reserved		  :	 1;
+		uint64_t	i_tag			  :	 3;
+		uint64_t	i_alt_pactyp		  :	 4;
+		uint64_t	i_bo			  :	 1;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_vbpm			  :	 1;
+		uint64_t	i_gbr			  :	 1;
+		uint64_t	i_ds			  :	 2;
+		uint64_t	i_ct			  :	 1;
+		uint64_t	i_tnum			  :	 5;
+		uint64_t	i_pactyp		  :	 4;
+		uint64_t	i_sidn			  :	 4;
+		uint64_t	i_didn			  :	 4;
+	} ii_ixsm_fld_s;
+} ii_ixsm_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the sideband bits of a spurious read         *
+ * response received from Crosstalk.                                    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ixss_u {
+	uint64_t	ii_ixss_regval;
+	struct  {
+		uint64_t	i_sideband                :	 8;
+		uint64_t	i_rsvd			  :	55;
+		uint64_t	i_valid			  :	 1;
+	} ii_ixss_fld_s;
+} ii_ixss_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register enables software to access the II LLP's test port.    *
+ * Refer to the LLP 2.5 documentation for an explanation of the test    *
+ * port. Software can write to this register to program the values      *
+ * for the control fields (TestErrCapture, TestClear, TestFlit,         *
+ * TestMask and TestSeed). Similarly, software can read from this       *
+ * register to obtain the values of the test port's status outputs      *
+ * (TestCBerr, TestValid and TestData).                                 *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ilct_u {
+	uint64_t	ii_ilct_regval;
+	struct  {
+		uint64_t	i_test_seed               :	20;
+		uint64_t	i_test_mask               :	 8;
+		uint64_t	i_test_data               :	20;
+		uint64_t	i_test_valid              :	 1;
+		uint64_t	i_test_cberr              :	 1;
+		uint64_t	i_test_flit               :	 3;
+		uint64_t	i_test_clear              :	 1;
+		uint64_t	i_test_err_capture        :	 1;
+		uint64_t	i_rsvd                    :	 9;
+	} ii_ilct_fld_s;
+} ii_ilct_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  If the II detects an illegal incoming Duplonet packet (request or   *
+ * reply) when VALID==0 in the IIEPH1 register, then it saves the       *
+ * contents of the packet's header flit in the IIEPH1 and IIEPH2        *
+ * registers, sets the VALID bit in IIEPH1, clears the OVERRUN bit,     *
+ * and assigns a value to the ERR_TYPE field which indicates the        *
+ * specific nature of the error. The II recognizes four different       *
+ * types of errors: short request packets (ERR_TYPE==2), short reply    *
+ * packets (ERR_TYPE==3), long request packets (ERR_TYPE==4) and long   *
+ * reply packets (ERR_TYPE==5). The encodings for these types of        *
+ * errors were chosen to be consistent with the same types of errors    *
+ * indicated by the ERR_TYPE field in the LB_ERROR_HDR1 register (in    *
+ * the LB unit). If the II detects an illegal incoming Duplonet         *
+ * packet when VALID==1 in the IIEPH1 register, then it merely sets     *
+ * the OVERRUN bit to indicate that a subsequent error has happened,    *
+ * and does nothing further.                                            *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iieph1_u {
+	uint64_t	ii_iieph1_regval;
+	struct	{
+		uint64_t	i_command		  :	 7;
+		uint64_t	i_rsvd_5		  :	 1;
+		uint64_t	i_suppl			  :	14;
+		uint64_t	i_rsvd_4		  :	 1;
+		uint64_t	i_source		  :	14;
+		uint64_t	i_rsvd_3		  :	 1;
+		uint64_t	i_err_type		  :	 4;
+		uint64_t	i_rsvd_2		  :	 4;
+		uint64_t	i_overrun		  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_valid			  :	 1;
+		uint64_t	i_rsvd			  :	13;
+	} ii_iieph1_fld_s;
+} ii_iieph1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register holds the Address field from the header flit of an    *
+ * incoming erroneous Duplonet packet, along with the tail bit which    *
+ * accompanied this header flit. This register is essentially an        *
+ * extension of IIEPH1. Two registers were necessary because the 64     *
+ * bits available in only a single register were insufficient to        *
+ * capture the entire header flit of an erroneous packet.               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iieph2_u {
+	uint64_t	ii_iieph2_regval;
+	struct  {
+		uint64_t	i_rsvd_0		  :	 3;
+		uint64_t	i_address                 :	47;
+		uint64_t	i_rsvd_1		  :	10;
+		uint64_t	i_tail			  :	 1;
+		uint64_t	i_rsvd			  :	 3;
+	} ii_iieph2_fld_s;
+} ii_iieph2_u_t;
+
+
+/******************************/
+
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register's value is a bit vector that guards access from SXBs  *
+ * to local registers within the II as well as to external Crosstalk    *
+ * widgets								*
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_islapr_u {
+	uint64_t	ii_islapr_regval;
+	struct  {
+		uint64_t	i_region		  :	64;
+	} ii_islapr_fld_s;
+} ii_islapr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  A write to this register of the 56-bit value "Pup+Bun" will cause	*
+ * the bit in the ISLAPR register corresponding to the region of the	*
+ * requestor to be set (access allowed).				(
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_islapo_u {
+	uint64_t	ii_islapo_regval;
+	struct  {
+		uint64_t	i_io_sbx_ovrride	  :	56;
+		uint64_t	i_rsvd			  :	 8;
+	} ii_islapo_fld_s;
+} ii_islapo_u_t;
+
+/************************************************************************
+ *                                                                      *
+ *  Determines how long the wrapper will wait aftr an interrupt is	*
+ * initially issued from the II before it times out the outstanding	*
+ * interrupt and drops it from the interrupt queue.			* 
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iwi_u {
+	uint64_t	ii_iwi_regval;
+	struct  {
+		uint64_t	i_prescale		  :	24;
+		uint64_t	i_rsvd			  :	 8;
+		uint64_t	i_timeout		  :	 8;
+		uint64_t	i_rsvd1			  :	 8;
+		uint64_t	i_intrpt_retry_period	  :	 8;
+		uint64_t	i_rsvd2			  :	 8;
+	} ii_iwi_fld_s;
+} ii_iwi_u_t;
+
+/************************************************************************
+ *                                                                      *
+ *  Log errors which have occurred in the II wrapper. The errors are	*
+ * cleared by writing to the IECLR register.				* 
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iwel_u {
+	uint64_t	ii_iwel_regval;
+	struct  {
+		uint64_t	i_intr_timed_out	  :	 1;
+		uint64_t	i_rsvd			  :	 7;
+		uint64_t	i_cam_overflow		  :	 1;
+		uint64_t	i_cam_read_miss		  :	 1;
+		uint64_t	i_rsvd1			  :	 2;
+		uint64_t	i_ioq_rep_underflow	  :	 1;
+		uint64_t	i_ioq_req_underflow	  :	 1;
+		uint64_t	i_ioq_rep_overflow	  :	 1;
+		uint64_t	i_ioq_req_overflow	  :	 1;
+		uint64_t	i_iiq_rep_overflow	  :	 1;
+		uint64_t	i_iiq_req_overflow	  :	 1;
+		uint64_t	i_rsvd2			  :	 6;
+		uint64_t	i_ii_xn_rep_cred_over_under:	 1;
+		uint64_t	i_ii_xn_req_cred_over_under:	 1;
+		uint64_t	i_rsvd3			  :	 6;
+		uint64_t	i_ii_xn_invalid_cmd	  :	 1;
+		uint64_t	i_xn_ii_invalid_cmd	  :	 1;
+		uint64_t	i_rsvd4			  :	30;
+	} ii_iwel_fld_s;
+} ii_iwel_u_t;
+
+/************************************************************************
+ *                                                                      *
+ *  Controls the II wrapper.						* 
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iwc_u {
+	uint64_t	ii_iwc_regval;
+	struct  {
+		uint64_t	i_dma_byte_swap		  :	 1;
+		uint64_t	i_rsvd			  :	 3;
+		uint64_t	i_cam_read_lines_reset	  :	 1;
+		uint64_t	i_rsvd1			  :	 3;
+		uint64_t	i_ii_xn_cred_over_under_log:	 1;
+		uint64_t	i_rsvd2			  :	19;
+		uint64_t	i_xn_rep_iq_depth	  :	 5;
+		uint64_t	i_rsvd3			  :	 3;
+		uint64_t	i_xn_req_iq_depth	  :	 5;
+		uint64_t	i_rsvd4			  :	 3;
+		uint64_t	i_iiq_depth		  :	 6;
+		uint64_t	i_rsvd5			  :	12;
+		uint64_t	i_force_rep_cred	  :	 1;
+		uint64_t	i_force_req_cred	  :	 1;
+	} ii_iwc_fld_s;
+} ii_iwc_u_t;
+
+/************************************************************************
+ *                                                                      *
+ *  Status in the II wrapper.						* 
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iws_u {
+	uint64_t	ii_iws_regval;
+	struct  {
+		uint64_t	i_xn_rep_iq_credits	  :	 5;
+		uint64_t	i_rsvd			  :	 3;
+		uint64_t	i_xn_req_iq_credits	  :	 5;
+		uint64_t	i_rsvd1			  :	51;
+	} ii_iws_fld_s;
+} ii_iws_u_t;
+
+/************************************************************************
+ *                                                                      *
+ *  Masks errors in the IWEL register.					*
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iweim_u {
+	uint64_t	ii_iweim_regval;
+	struct  {
+		uint64_t	i_intr_timed_out	  :	 1;
+		uint64_t	i_rsvd			  :	 7;
+		uint64_t	i_cam_overflow		  :	 1;
+		uint64_t	i_cam_read_miss		  :	 1;
+		uint64_t	i_rsvd1			  :	 2;
+		uint64_t	i_ioq_rep_underflow	  :	 1;
+		uint64_t	i_ioq_req_underflow	  :	 1;
+		uint64_t	i_ioq_rep_overflow	  :	 1;
+		uint64_t	i_ioq_req_overflow	  :	 1;
+		uint64_t	i_iiq_rep_overflow	  :	 1;
+		uint64_t	i_iiq_req_overflow	  :	 1;
+		uint64_t	i_rsvd2			  :	 6;
+		uint64_t	i_ii_xn_rep_cred_overflow :	 1;
+		uint64_t	i_ii_xn_req_cred_overflow :	 1;
+		uint64_t	i_rsvd3			  :	 6;
+		uint64_t	i_ii_xn_invalid_cmd	  :	 1;
+		uint64_t	i_xn_ii_invalid_cmd	  :	 1;
+		uint64_t	i_rsvd4			  :	30;
+	} ii_iweim_fld_s;
+} ii_iweim_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  A write to this register causes a particular field in the           *
+ * corresponding widget's PRB entry to be adjusted up or down by 1.     *
+ * This counter should be used when recovering from error and reset     *
+ * conditions. Note that software would be capable of causing           *
+ * inadvertent overflow or underflow of these counters.                 *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ipca_u {
+	uint64_t	ii_ipca_regval;
+	struct  {
+		uint64_t	i_wid                     :	 4;
+		uint64_t	i_adjust		  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_field			  :	 2;
+		uint64_t	i_rsvd			  :	54;
+	} ii_ipca_fld_s;
+} ii_ipca_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+
+typedef union ii_iprte0a_u {
+	uint64_t	ii_iprte0a_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t       i_vld                     :      1;
+	} ii_iprte0a_fld_s;
+} ii_iprte0a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte1a_u {
+	uint64_t	ii_iprte1a_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t       i_vld                     :      1;
+	} ii_iprte1a_fld_s;
+} ii_iprte1a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte2a_u {
+	uint64_t	ii_iprte2a_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t       i_vld                     :      1;
+	} ii_iprte2a_fld_s;
+} ii_iprte2a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte3a_u {
+	uint64_t	ii_iprte3a_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t	i_vld			  :	 1;
+	} ii_iprte3a_fld_s;
+} ii_iprte3a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte4a_u {
+	uint64_t	ii_iprte4a_regval;
+	struct	{
+		uint64_t	i_rsvd_1		  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t	i_vld			  :	 1;
+	} ii_iprte4a_fld_s;
+} ii_iprte4a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte5a_u {
+	uint64_t	ii_iprte5a_regval;
+	struct	{
+		uint64_t	i_rsvd_1		  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t	i_vld			  :	 1;
+	} ii_iprte5a_fld_s;
+} ii_iprte5a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte6a_u {
+	uint64_t	ii_iprte6a_regval;
+	struct	{
+		uint64_t	i_rsvd_1		  :	54;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t	i_vld			  :	 1;
+	} ii_iprte6a_fld_s;
+} ii_iprte6a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte7a_u {
+        uint64_t       ii_iprte7a_regval;
+        struct  {
+                uint64_t       i_rsvd_1                  :     54;
+                uint64_t       i_widget                  :      4;
+                uint64_t       i_to_cnt                  :      5;
+                uint64_t       i_vld                     :      1;
+        } ii_iprtea7_fld_s;
+} ii_iprte7a_u_t;
+
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+
+typedef union ii_iprte0b_u {
+	uint64_t	ii_iprte0b_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+	} ii_iprte0b_fld_s;
+} ii_iprte0b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte1b_u {
+	uint64_t	ii_iprte1b_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+	} ii_iprte1b_fld_s;
+} ii_iprte1b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte2b_u {
+	uint64_t	ii_iprte2b_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+	} ii_iprte2b_fld_s;
+} ii_iprte2b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte3b_u {
+	uint64_t	ii_iprte3b_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+	} ii_iprte3b_fld_s;
+} ii_iprte3b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte4b_u {
+	uint64_t	ii_iprte4b_regval;
+	struct	{
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+	} ii_iprte4b_fld_s;
+} ii_iprte4b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte5b_u {
+	uint64_t	ii_iprte5b_regval;
+	struct	{
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+	} ii_iprte5b_fld_s;
+} ii_iprte5b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte6b_u {
+	uint64_t	ii_iprte6b_regval;
+	struct	{
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+
+	} ii_iprte6b_fld_s;
+} ii_iprte6b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iprte7b_u {
+        uint64_t       ii_iprte7b_regval;
+        struct  {
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_address		  :	47;
+		uint64_t	i_init			  :	 3;
+		uint64_t       i_source                  :     11;
+        } ii_iprte7b_fld_s;
+} ii_iprte7b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  SHub II contains a feature which did not exist in      *
+ * the Hub which automatically cleans up after a Read Response          *
+ * timeout, including deallocation of the IPRTE and recovery of IBuf    *
+ * space. The inclusion of this register in SHub is for backward        *
+ * compatibility                                                        *
+ * A write to this register causes an entry from the table of           *
+ * outstanding PIO Read Requests to be freed and returned to the        *
+ * stack of free entries. This register is used in handling the         *
+ * timeout errors that result in a PIO Reply never returning from       *
+ * Crosstalk.                                                           *
+ * Note that this register does not affect the contents of the IPRTE    *
+ * registers. The Valid bits in those registers have to be              *
+ * specifically turned off by software.                                 *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ipdr_u {
+	uint64_t	ii_ipdr_regval;
+	struct  {
+		uint64_t	i_te                      :	 3;
+		uint64_t	i_rsvd_1		  :	 1;
+		uint64_t	i_pnd			  :	 1;
+		uint64_t	i_init_rpcnt		  :	 1;
+		uint64_t	i_rsvd			  :	58;
+	} ii_ipdr_fld_s;
+} ii_ipdr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  A write to this register causes a CRB entry to be returned to the   *
+ * queue of free CRBs. The entry should have previously been cleared    *
+ * (mark bit) via backdoor access to the pertinent CRB entry. This      *
+ * register is used in the last step of handling the errors that are    *
+ * captured and marked in CRB entries.  Briefly: 1) first error for     *
+ * DMA write from a particular device, and first error for a            *
+ * particular BTE stream, lead to a marked CRB entry, and processor     *
+ * interrupt, 2) software reads the error information captured in the   *
+ * CRB entry, and presumably takes some corrective action, 3)           *
+ * software clears the mark bit, and finally 4) software writes to      *
+ * the ICDR register to return the CRB entry to the list of free CRB    *
+ * entries.                                                             *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icdr_u {
+	uint64_t	ii_icdr_regval;
+	struct  {
+		uint64_t	i_crb_num                 :	 4;
+		uint64_t	i_pnd			  :	 1;
+		uint64_t       i_rsvd                    :     59;
+	} ii_icdr_fld_s;
+} ii_icdr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register provides debug access to two FIFOs inside of II.      *
+ * Both IOQ_MAX* fields of this register contain the instantaneous      *
+ * depth (in units of the number of available entries) of the           *
+ * associated IOQ FIFO.  A read of this register will return the        *
+ * number of free entries on each FIFO at the time of the read.  So     *
+ * when a FIFO is idle, the associated field contains the maximum       *
+ * depth of the FIFO.  This register is writable for debug reasons      *
+ * and is intended to be written with the maximum desired FIFO depth    *
+ * while the FIFO is idle. Software must assure that II is idle when    *
+ * this register is written. If there are any active entries in any     *
+ * of these FIFOs when this register is written, the results are        *
+ * undefined.                                                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ifdr_u {
+	uint64_t	ii_ifdr_regval;
+	struct  {
+		uint64_t	i_ioq_max_rq              :	 7;
+		uint64_t	i_set_ioq_rq		  :	 1;
+		uint64_t	i_ioq_max_rp		  :	 7;
+		uint64_t	i_set_ioq_rp		  :	 1;
+		uint64_t	i_rsvd			  :	48;
+	} ii_ifdr_fld_s;
+} ii_ifdr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register allows the II to become sluggish in removing          *
+ * messages from its inbound queue (IIQ). This will cause messages to   *
+ * back up in either virtual channel. Disabling the "molasses" mode     *
+ * subsequently allows the II to be tested under stress. In the         *
+ * sluggish ("Molasses") mode, the localized effects of congestion      *
+ * can be observed.                                                     *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iiap_u {
+        uint64_t       ii_iiap_regval;
+        struct  {
+                uint64_t       i_rq_mls                  :      6;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_rp_mls		  :	 6;
+		uint64_t       i_rsvd                    :     50;
+        } ii_iiap_fld_s;
+} ii_iiap_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register allows several parameters of CRB operation to be      *
+ * set. Note that writing to this register can have catastrophic side   *
+ * effects, if the CRB is not quiescent, i.e. if the CRB is             *
+ * processing protocol messages when the write occurs.                  *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icmr_u {
+	uint64_t	ii_icmr_regval;
+	struct  {
+		uint64_t	i_sp_msg                  :	 1;
+		uint64_t	i_rd_hdr		  :	 1;
+		uint64_t	i_rsvd_4		  :	 2;
+		uint64_t	i_c_cnt			  :	 4;
+		uint64_t	i_rsvd_3		  :	 4;
+		uint64_t	i_clr_rqpd		  :	 1;
+		uint64_t	i_clr_rppd		  :	 1;
+		uint64_t	i_rsvd_2		  :	 2;
+		uint64_t	i_fc_cnt		  :	 4;
+		uint64_t	i_crb_vld		  :	15;
+		uint64_t	i_crb_mark		  :	15;
+		uint64_t	i_rsvd_1		  :	 2;
+		uint64_t	i_precise		  :	 1;
+		uint64_t	i_rsvd			  :	11;
+	} ii_icmr_fld_s;
+} ii_icmr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register allows control of the table portion of the CRB        *
+ * logic via software. Control operations from this register have       *
+ * priority over all incoming Crosstalk or BTE requests.                *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_iccr_u {
+	uint64_t	ii_iccr_regval;
+	struct  {
+		uint64_t	i_crb_num                 :	 4;
+		uint64_t	i_rsvd_1		  :	 4;
+		uint64_t	i_cmd			  :	 8;
+		uint64_t	i_pending		  :	 1;
+		uint64_t	i_rsvd			  :	47;
+	} ii_iccr_fld_s;
+} ii_iccr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register allows the maximum timeout value to be programmed.    *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icto_u {
+	uint64_t	ii_icto_regval;
+	struct  {
+		uint64_t	i_timeout                 :	 8;
+		uint64_t	i_rsvd			  :	56;
+	} ii_icto_fld_s;
+} ii_icto_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register allows the timeout prescalar to be programmed. An     *
+ * internal counter is associated with this register. When the          *
+ * internal counter reaches the value of the PRESCALE field, the        *
+ * timer registers in all valid CRBs are incremented (CRBx_D[TIMEOUT]   *
+ * field). The internal counter resets to zero, and then continues      *
+ * counting.                                                            *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ictp_u {
+	uint64_t	ii_ictp_regval;
+	struct  {
+		uint64_t	i_prescale                :	24;
+		uint64_t	i_rsvd			  :	40;
+	} ii_ictp_fld_s;
+} ii_ictp_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ * The CRB Entry registers can be conceptualized as rows and columns    *
+ * (illustrated in the table above). Each row contains the 4            *
+ * registers required for a single CRB Entry. The first doubleword      *
+ * (column) for each entry is labeled A, and the second doubleword      *
+ * (higher address) is labeled B, the third doubleword is labeled C,    *
+ * the fourth doubleword is labeled D and the fifth doubleword is       *
+ * labeled E. All CRB entries have their addresses on a quarter         *
+ * cacheline aligned boundary.                   *
+ * Upon reset, only the following fields are initialized: valid         *
+ * (VLD), priority count, timeout, timeout valid, and context valid.    *
+ * All other bits should be cleared by software before use (after       *
+ * recovering any potential error state from before the reset).         *
+ * The following four tables summarize the format for the four          *
+ * registers that are used for each ICRB# Entry.                        *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icrb0_a_u {
+	uint64_t	ii_icrb0_a_regval;
+	struct  {
+		uint64_t	ia_iow                    :	 1;
+		uint64_t	ia_vld			  :	 1;
+		uint64_t	ia_addr			  :	47;
+		uint64_t	ia_tnum			  :	 5;
+		uint64_t	ia_sidn			  :	 4;
+		uint64_t       ia_rsvd                   :      6;
+	} ii_icrb0_a_fld_s;
+} ii_icrb0_a_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icrb0_b_u {
+	uint64_t	ii_icrb0_b_regval;
+	struct	{
+		uint64_t	ib_xt_err		  :	 1;
+		uint64_t	ib_mark			  :	 1;
+		uint64_t	ib_ln_uce		  :	 1;
+		uint64_t	ib_errcode		  :	 3;
+		uint64_t	ib_error		  :	 1;
+		uint64_t	ib_stall__bte_1		  :	 1;
+		uint64_t	ib_stall__bte_0		  :	 1;
+		uint64_t	ib_stall__intr		  :	 1;
+		uint64_t	ib_stall_ib		  :	 1;
+		uint64_t	ib_intvn		  :	 1;
+		uint64_t	ib_wb			  :	 1;
+		uint64_t	ib_hold			  :	 1;
+		uint64_t	ib_ack			  :	 1;
+		uint64_t	ib_resp			  :	 1;
+		uint64_t	ib_ack_cnt		  :	11;
+		uint64_t	ib_rsvd			  :	 7;
+		uint64_t	ib_exc			  :	 5;
+		uint64_t	ib_init			  :	 3;
+		uint64_t	ib_imsg			  :	 8;
+		uint64_t	ib_imsgtype		  :	 2;
+		uint64_t	ib_use_old		  :	 1;
+		uint64_t	ib_rsvd_1		  :	11;
+	} ii_icrb0_b_fld_s;
+} ii_icrb0_b_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icrb0_c_u {
+	uint64_t	ii_icrb0_c_regval;
+	struct	{
+		uint64_t	ic_source		  :	15;
+		uint64_t	ic_size			  :	 2;
+		uint64_t	ic_ct			  :	 1;
+		uint64_t	ic_bte_num		  :	 1;
+		uint64_t	ic_gbr			  :	 1;
+		uint64_t	ic_resprqd		  :	 1;
+		uint64_t	ic_bo			  :	 1;
+		uint64_t	ic_suppl		  :	15;
+		uint64_t	ic_rsvd			  :	27;
+	} ii_icrb0_c_fld_s;
+} ii_icrb0_c_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icrb0_d_u {
+	uint64_t	ii_icrb0_d_regval;
+	struct  {
+		uint64_t	id_pa_be                  :	43;
+		uint64_t	id_bte_op		  :	 1;
+		uint64_t	id_pr_psc		  :	 4;
+		uint64_t	id_pr_cnt		  :	 4;
+		uint64_t	id_sleep		  :	 1;
+		uint64_t	id_rsvd			  :	11;
+	} ii_icrb0_d_fld_s;
+} ii_icrb0_d_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icrb0_e_u {
+	uint64_t	ii_icrb0_e_regval;
+	struct  {
+		uint64_t	ie_timeout                :	 8;
+		uint64_t	ie_context		  :	15;
+		uint64_t	ie_rsvd			  :	 1;
+		uint64_t	ie_tvld			  :	 1;
+		uint64_t	ie_cvld			  :	 1;
+		uint64_t	ie_rsvd_0		  :	38;
+	} ii_icrb0_e_fld_s;
+} ii_icrb0_e_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the lower 64 bits of the header of the       *
+ * spurious message captured by II. Valid when the SP_MSG bit in ICMR   *
+ * register is set.                                                     *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icsml_u {
+	uint64_t	ii_icsml_regval;
+	struct  {
+		uint64_t	i_tt_addr                 :	47;
+		uint64_t	i_newsuppl_ex		  :	14;
+		uint64_t	i_reserved		  :	 2;
+		uint64_t       i_overflow                :      1;
+	} ii_icsml_fld_s;
+} ii_icsml_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the middle 64 bits of the header of the      *
+ * spurious message captured by II. Valid when the SP_MSG bit in ICMR   *
+ * register is set.                                                     *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icsmm_u {
+	uint64_t	ii_icsmm_regval;
+	struct  {
+		uint64_t	i_tt_ack_cnt              :	11;
+		uint64_t	i_reserved		  :	53;
+	} ii_icsmm_fld_s;
+} ii_icsmm_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the microscopic state, all the inputs to     *
+ * the protocol table, captured with the spurious message. Valid when   *
+ * the SP_MSG bit in the ICMR register is set.                          *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_icsmh_u {
+	uint64_t	ii_icsmh_regval;
+	struct  {
+		uint64_t	i_tt_vld                  :	 1;
+		uint64_t	i_xerr			  :	 1;
+		uint64_t	i_ft_cwact_o		  :	 1;
+		uint64_t	i_ft_wact_o		  :	 1;
+		uint64_t       i_ft_active_o             :      1;
+		uint64_t	i_sync			  :	 1;
+		uint64_t	i_mnusg			  :	 1;
+		uint64_t	i_mnusz			  :	 1;
+		uint64_t	i_plusz			  :	 1;
+		uint64_t	i_plusg			  :	 1;
+		uint64_t	i_tt_exc		  :	 5;
+		uint64_t	i_tt_wb			  :	 1;
+		uint64_t	i_tt_hold		  :	 1;
+		uint64_t	i_tt_ack		  :	 1;
+		uint64_t	i_tt_resp		  :	 1;
+		uint64_t	i_tt_intvn		  :	 1;
+		uint64_t	i_g_stall_bte1		  :	 1;
+		uint64_t	i_g_stall_bte0		  :	 1;
+		uint64_t	i_g_stall_il		  :	 1;
+		uint64_t	i_g_stall_ib		  :	 1;
+		uint64_t	i_tt_imsg		  :	 8;
+		uint64_t	i_tt_imsgtype		  :	 2;
+		uint64_t	i_tt_use_old		  :	 1;
+		uint64_t	i_tt_respreqd		  :	 1;
+		uint64_t	i_tt_bte_num		  :	 1;
+		uint64_t	i_cbn			  :	 1;
+		uint64_t	i_match			  :	 1;
+		uint64_t	i_rpcnt_lt_34		  :	 1;
+		uint64_t	i_rpcnt_ge_34		  :	 1;
+		uint64_t	i_rpcnt_lt_18		  :	 1;
+		uint64_t	i_rpcnt_ge_18		  :	 1;
+		uint64_t       i_rpcnt_lt_2              :      1;
+		uint64_t	i_rpcnt_ge_2		  :	 1;
+		uint64_t	i_rqcnt_lt_18		  :	 1;
+		uint64_t	i_rqcnt_ge_18		  :	 1;
+		uint64_t	i_rqcnt_lt_2		  :	 1;
+		uint64_t	i_rqcnt_ge_2		  :	 1;
+		uint64_t	i_tt_device		  :	 7;
+		uint64_t	i_tt_init		  :	 3;
+		uint64_t	i_reserved		  :	 5;
+	} ii_icsmh_fld_s;
+} ii_icsmh_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  The Shub DEBUG unit provides a 3-bit selection signal to the        *
+ * II core and a 3-bit selection signal to the fsbclk domain in the II  *
+ * wrapper.                                                             *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_idbss_u {
+	uint64_t	ii_idbss_regval;
+	struct  {
+		uint64_t	i_iioclk_core_submenu     :	 3;
+		uint64_t	i_rsvd			  :	 5;
+		uint64_t	i_fsbclk_wrapper_submenu  :	 3;
+		uint64_t	i_rsvd_1		  :	 5;
+		uint64_t	i_iioclk_menu		  :	 5;
+		uint64_t	i_rsvd_2		  :	43;
+	} ii_idbss_fld_s;
+} ii_idbss_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register is used to set up the length for a       *
+ * transfer and then to monitor the progress of that transfer. This     *
+ * register needs to be initialized before a transfer is started. A     *
+ * legitimate write to this register will set the Busy bit, clear the   *
+ * Error bit, and initialize the length to the value desired.           *
+ * While the transfer is in progress, hardware will decrement the       *
+ * length field with each successful block that is copied. Once the     *
+ * transfer completes, hardware will clear the Busy bit. The length     *
+ * field will also contain the number of cache lines left to be         *
+ * transferred.                                                         *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibls0_u {
+	uint64_t	ii_ibls0_regval;
+	struct	{
+		uint64_t	i_length		  :	16;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_busy			  :	 1;
+		uint64_t       i_rsvd                    :     43;
+	} ii_ibls0_fld_s;
+} ii_ibls0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibsa0_u {
+	uint64_t	ii_ibsa0_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 7;
+		uint64_t	i_addr			  :	42;
+		uint64_t       i_rsvd                    :     15;
+	} ii_ibsa0_fld_s;
+} ii_ibsa0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibda0_u {
+	uint64_t	ii_ibda0_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 7;
+		uint64_t	i_addr			  :	42;
+		uint64_t	i_rsvd			  :	15;
+	} ii_ibda0_fld_s;
+} ii_ibda0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  Writing to this register sets up the attributes of the transfer     *
+ * and initiates the transfer operation. Reading this register has      *
+ * the side effect of terminating any transfer in progress. Note:       *
+ * stopping a transfer midstream could have an adverse impact on the    *
+ * other BTE. If a BTE stream has to be stopped (due to error           *
+ * handling for example), both BTE streams should be stopped and        *
+ * their transfers discarded.                                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibct0_u {
+	uint64_t	ii_ibct0_regval;
+	struct  {
+		uint64_t	i_zerofill                :	 1;
+		uint64_t	i_rsvd_2		  :	 3;
+		uint64_t	i_notify		  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t       i_poison                  :      1;
+		uint64_t       i_rsvd                    :     55;
+	} ii_ibct0_fld_s;
+} ii_ibct0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the address to which the WINV is sent.       *
+ * This address has to be cache line aligned.                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibna0_u {
+	uint64_t	ii_ibna0_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 7;
+		uint64_t	i_addr			  :	42;
+		uint64_t	i_rsvd			  :	15;
+	} ii_ibna0_fld_s;
+} ii_ibna0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the programmable level as well as the node   *
+ * ID and PI unit of the processor to which the interrupt will be       *
+ * sent.                                                                *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibia0_u {
+	uint64_t	ii_ibia0_regval;
+	struct  {
+		uint64_t	i_rsvd_2                   :	 1;
+		uint64_t	i_node_id		  :	11;
+		uint64_t	i_rsvd_1		  :	 4;
+		uint64_t	i_level			  :	 7;
+		uint64_t       i_rsvd                    :     41;
+	} ii_ibia0_fld_s;
+} ii_ibia0_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ * Description:  This register is used to set up the length for a       *
+ * transfer and then to monitor the progress of that transfer. This     *
+ * register needs to be initialized before a transfer is started. A     *
+ * legitimate write to this register will set the Busy bit, clear the   *
+ * Error bit, and initialize the length to the value desired.           *
+ * While the transfer is in progress, hardware will decrement the       *
+ * length field with each successful block that is copied. Once the     *
+ * transfer completes, hardware will clear the Busy bit. The length     *
+ * field will also contain the number of cache lines left to be         *
+ * transferred.                                                         *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibls1_u {
+	uint64_t	ii_ibls1_regval;
+	struct  {
+		uint64_t	i_length                  :	16;
+		uint64_t	i_error			  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_busy			  :	 1;
+		uint64_t       i_rsvd                    :     43;
+	} ii_ibls1_fld_s;
+} ii_ibls1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibsa1_u {
+	uint64_t	ii_ibsa1_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 7;
+		uint64_t	i_addr			  :	33;
+		uint64_t	i_rsvd			  :	24;
+	} ii_ibsa1_fld_s;
+} ii_ibsa1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibda1_u {
+	uint64_t	ii_ibda1_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 7;
+		uint64_t	i_addr			  :	33;
+		uint64_t	i_rsvd			  :	24;
+	} ii_ibda1_fld_s;
+} ii_ibda1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  Writing to this register sets up the attributes of the transfer     *
+ * and initiates the transfer operation. Reading this register has      *
+ * the side effect of terminating any transfer in progress. Note:       *
+ * stopping a transfer midstream could have an adverse impact on the    *
+ * other BTE. If a BTE stream has to be stopped (due to error           *
+ * handling for example), both BTE streams should be stopped and        *
+ * their transfers discarded.                                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibct1_u {
+	uint64_t	ii_ibct1_regval;
+	struct  {
+		uint64_t	i_zerofill                :	 1;
+		uint64_t	i_rsvd_2		  :	 3;
+		uint64_t	i_notify		  :	 1;
+		uint64_t	i_rsvd_1		  :	 3;
+		uint64_t	i_poison		  :	 1;
+		uint64_t	i_rsvd			  :	55;
+	} ii_ibct1_fld_s;
+} ii_ibct1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the address to which the WINV is sent.       *
+ * This address has to be cache line aligned.                           *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibna1_u {
+	uint64_t	ii_ibna1_regval;
+	struct  {
+		uint64_t	i_rsvd_1                  :	 7;
+		uint64_t	i_addr			  :	33;
+		uint64_t       i_rsvd                    :     24;
+	} ii_ibna1_fld_s;
+} ii_ibna1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register contains the programmable level as well as the node   *
+ * ID and PI unit of the processor to which the interrupt will be       *
+ * sent.                                                                *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ibia1_u {
+	uint64_t	ii_ibia1_regval;
+	struct  {
+		uint64_t	i_pi_id                   :	 1;
+		uint64_t	i_node_id		  :	 8;
+		uint64_t	i_rsvd_1		  :	 7;
+		uint64_t	i_level			  :	 7;
+		uint64_t	i_rsvd			  :	41;
+	} ii_ibia1_fld_s;
+} ii_ibia1_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *  This register defines the resources that feed information into      *
+ * the two performance counters located in the IO Performance           *
+ * Profiling Register. There are 17 different quantities that can be    *
+ * measured. Given these 17 different options, the two performance      *
+ * counters have 15 of them in common; menu selections 0 through 0xE    *
+ * are identical for each performance counter. As for the other two     *
+ * options, one is available from one performance counter and the       *
+ * other is available from the other performance counter. Hence, the    *
+ * II supports all 17*16=272 possible combinations of quantities to     *
+ * measure.                                                             *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ipcr_u {
+	uint64_t	ii_ipcr_regval;
+	struct  {
+		uint64_t	i_ippr0_c                 :	 4;
+		uint64_t	i_ippr1_c		  :	 4;
+		uint64_t	i_icct			  :	 8;
+		uint64_t       i_rsvd                    :     48;
+	} ii_ipcr_fld_s;
+} ii_ipcr_u_t;
+
+
+/************************************************************************
+ *                                                                      *
+ *                                                                      *
+ *                                                                      *
+ ************************************************************************/
+
+typedef union ii_ippr_u {
+	uint64_t	ii_ippr_regval;
+	struct  {
+		uint64_t	i_ippr0                   :	32;
+		uint64_t	i_ippr1			  :	32;
+	} ii_ippr_fld_s;
+} ii_ippr_u_t;
+
+
+
+/**************************************************************************
+ *                                                                        *
+ * The following defines which were not formed into structures are        *
+ * probably indentical to another register, and the name of the           *
+ * register is provided against each of these registers. This             *
+ * information needs to be checked carefully                              *
+ *                                                                        *
+ *           IIO_ICRB1_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB1_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB1_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB1_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB1_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB2_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB2_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB2_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB2_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB2_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB3_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB3_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB3_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB3_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB3_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB4_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB4_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB4_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB4_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB4_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB5_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB5_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB5_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB5_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB5_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB6_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB6_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB6_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB6_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB6_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB7_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB7_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB7_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB7_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB7_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB8_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB8_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB8_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB8_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB8_E                IIO_ICRB0_E                       *
+ *           IIO_ICRB9_A                IIO_ICRB0_A                       *
+ *           IIO_ICRB9_B                IIO_ICRB0_B                       *
+ *           IIO_ICRB9_C                IIO_ICRB0_C                       *
+ *           IIO_ICRB9_D                IIO_ICRB0_D                       *
+ *           IIO_ICRB9_E                IIO_ICRB0_E                       *
+ *           IIO_ICRBA_A                IIO_ICRB0_A                       *
+ *           IIO_ICRBA_B                IIO_ICRB0_B                       *
+ *           IIO_ICRBA_C                IIO_ICRB0_C                       *
+ *           IIO_ICRBA_D                IIO_ICRB0_D                       *
+ *           IIO_ICRBA_E                IIO_ICRB0_E                       *
+ *           IIO_ICRBB_A                IIO_ICRB0_A                       *
+ *           IIO_ICRBB_B                IIO_ICRB0_B                       *
+ *           IIO_ICRBB_C                IIO_ICRB0_C                       *
+ *           IIO_ICRBB_D                IIO_ICRB0_D                       *
+ *           IIO_ICRBB_E                IIO_ICRB0_E                       *
+ *           IIO_ICRBC_A                IIO_ICRB0_A                       *
+ *           IIO_ICRBC_B                IIO_ICRB0_B                       *
+ *           IIO_ICRBC_C                IIO_ICRB0_C                       *
+ *           IIO_ICRBC_D                IIO_ICRB0_D                       *
+ *           IIO_ICRBC_E                IIO_ICRB0_E                       *
+ *           IIO_ICRBD_A                IIO_ICRB0_A                       *
+ *           IIO_ICRBD_B                IIO_ICRB0_B                       *
+ *           IIO_ICRBD_C                IIO_ICRB0_C                       *
+ *           IIO_ICRBD_D                IIO_ICRB0_D                       *
+ *           IIO_ICRBD_E                IIO_ICRB0_E                       *
+ *           IIO_ICRBE_A                IIO_ICRB0_A                       *
+ *           IIO_ICRBE_B                IIO_ICRB0_B                       *
+ *           IIO_ICRBE_C                IIO_ICRB0_C                       *
+ *           IIO_ICRBE_D                IIO_ICRB0_D                       *
+ *           IIO_ICRBE_E                IIO_ICRB0_E                       *
+ *                                                                        *
+ **************************************************************************/
+
+
+/*
+ * Slightly friendlier names for some common registers.
+ */
+#define IIO_WIDGET              IIO_WID      /* Widget identification */
+#define IIO_WIDGET_STAT         IIO_WSTAT    /* Widget status register */
+#define IIO_WIDGET_CTRL         IIO_WCR      /* Widget control register */
+#define IIO_PROTECT             IIO_ILAPR    /* IO interface protection */
+#define IIO_PROTECT_OVRRD       IIO_ILAPO    /* IO protect override */
+#define IIO_OUTWIDGET_ACCESS    IIO_IOWA     /* Outbound widget access */
+#define IIO_INWIDGET_ACCESS     IIO_IIWA     /* Inbound widget access */
+#define IIO_INDEV_ERR_MASK      IIO_IIDEM    /* Inbound device error mask */
+#define IIO_LLP_CSR             IIO_ILCSR    /* LLP control and status */
+#define IIO_LLP_LOG             IIO_ILLR     /* LLP log */
+#define IIO_XTALKCC_TOUT        IIO_IXCC     /* Xtalk credit count timeout*/
+#define IIO_XTALKTT_TOUT        IIO_IXTT     /* Xtalk tail timeout */
+#define IIO_IO_ERR_CLR          IIO_IECLR    /* IO error clear */
+#define IIO_IGFX_0 		IIO_IGFX0
+#define IIO_IGFX_1 		IIO_IGFX1
+#define IIO_IBCT_0		IIO_IBCT0
+#define IIO_IBCT_1		IIO_IBCT1
+#define IIO_IBLS_0		IIO_IBLS0
+#define IIO_IBLS_1		IIO_IBLS1
+#define IIO_IBSA_0		IIO_IBSA0
+#define IIO_IBSA_1		IIO_IBSA1
+#define IIO_IBDA_0		IIO_IBDA0
+#define IIO_IBDA_1		IIO_IBDA1
+#define IIO_IBNA_0		IIO_IBNA0
+#define IIO_IBNA_1		IIO_IBNA1
+#define IIO_IBIA_0		IIO_IBIA0
+#define IIO_IBIA_1		IIO_IBIA1
+#define IIO_IOPRB_0		IIO_IPRB0
+
+#define IIO_PRTE_A(_x)		(IIO_IPRTE0_A + (8 * (_x)))
+#define IIO_PRTE_B(_x)		(IIO_IPRTE0_B + (8 * (_x)))
+#define IIO_NUM_PRTES		8	/* Total number of PRB table entries */
+#define IIO_WIDPRTE_A(x)	IIO_PRTE_A(((x) - 8)) /* widget ID to its PRTE num */
+#define IIO_WIDPRTE_B(x)	IIO_PRTE_B(((x) - 8)) /* widget ID to its PRTE num */
+
+#define IIO_NUM_IPRBS 		(9) 
+
+#define IIO_LLP_CSR_IS_UP               0x00002000
+#define IIO_LLP_CSR_LLP_STAT_MASK       0x00003000
+#define IIO_LLP_CSR_LLP_STAT_SHFT       12
+
+#define IIO_LLP_CB_MAX  0xffff	/* in ILLR CB_CNT, Max Check Bit errors */
+#define IIO_LLP_SN_MAX  0xffff	/* in ILLR SN_CNT, Max Sequence Number errors */
+
+/* key to IIO_PROTECT_OVRRD */
+#define IIO_PROTECT_OVRRD_KEY   0x53474972756c6573ull   /* "SGIrules" */
+
+/* BTE register names */
+#define IIO_BTE_STAT_0          IIO_IBLS_0   /* Also BTE length/status 0 */
+#define IIO_BTE_SRC_0           IIO_IBSA_0   /* Also BTE source address  0 */
+#define IIO_BTE_DEST_0          IIO_IBDA_0   /* Also BTE dest. address 0 */
+#define IIO_BTE_CTRL_0          IIO_IBCT_0   /* Also BTE control/terminate 0 */
+#define IIO_BTE_NOTIFY_0        IIO_IBNA_0   /* Also BTE notification 0 */
+#define IIO_BTE_INT_0           IIO_IBIA_0   /* Also BTE interrupt 0 */
+#define IIO_BTE_OFF_0           0            /* Base offset from BTE 0 regs. */
+#define IIO_BTE_OFF_1   	(IIO_IBLS_1 - IIO_IBLS_0) /* Offset from base to BTE 1 */
+
+/* BTE register offsets from base */
+#define BTEOFF_STAT             0
+#define BTEOFF_SRC              (IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
+#define BTEOFF_DEST             (IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
+#define BTEOFF_CTRL             (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
+#define BTEOFF_NOTIFY           (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
+#define BTEOFF_INT              (IIO_BTE_INT_0 - IIO_BTE_STAT_0)
+
+
+/* names used in shub diags */
+#define IIO_BASE_BTE0   IIO_IBLS_0		
+#define IIO_BASE_BTE1   IIO_IBLS_1		
+
+/*
+ * Macro which takes the widget number, and returns the
+ * IO PRB address of that widget.
+ * value _x is expected to be a widget number in the range
+ * 0, 8 - 0xF
+ */
+#define IIO_IOPRB(_x)   (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
+                        (_x) : \
+                        (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) )
+
+
+/* GFX Flow Control Node/Widget Register */
+#define IIO_IGFX_W_NUM_BITS	4	/* size of widget num field */
+#define IIO_IGFX_W_NUM_MASK	((1<<IIO_IGFX_W_NUM_BITS)-1)
+#define IIO_IGFX_W_NUM_SHIFT	0
+#define IIO_IGFX_PI_NUM_BITS	1	/* size of PI num field */
+#define IIO_IGFX_PI_NUM_MASK	((1<<IIO_IGFX_PI_NUM_BITS)-1)
+#define IIO_IGFX_PI_NUM_SHIFT	4
+#define IIO_IGFX_N_NUM_BITS	8	/* size of node num field */
+#define IIO_IGFX_N_NUM_MASK	((1<<IIO_IGFX_N_NUM_BITS)-1)
+#define IIO_IGFX_N_NUM_SHIFT	5
+#define IIO_IGFX_P_NUM_BITS	1	/* size of processor num field */
+#define IIO_IGFX_P_NUM_MASK	((1<<IIO_IGFX_P_NUM_BITS)-1)
+#define IIO_IGFX_P_NUM_SHIFT	16
+#define IIO_IGFX_INIT(widget, pi, node, cpu)				(\
+	(((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) |	 \
+	(((pi)     & IIO_IGFX_PI_NUM_MASK)<< IIO_IGFX_PI_NUM_SHIFT)|	 \
+	(((node)   & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) |	 \
+	(((cpu)    & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT))
+
+
+/* Scratch registers (all bits available) */
+#define IIO_SCRATCH_REG0        IIO_ISCR0
+#define IIO_SCRATCH_REG1        IIO_ISCR1
+#define IIO_SCRATCH_MASK        0xffffffffffffffffUL
+
+#define IIO_SCRATCH_BIT0_0      0x0000000000000001UL
+#define IIO_SCRATCH_BIT0_1      0x0000000000000002UL
+#define IIO_SCRATCH_BIT0_2      0x0000000000000004UL
+#define IIO_SCRATCH_BIT0_3      0x0000000000000008UL
+#define IIO_SCRATCH_BIT0_4      0x0000000000000010UL
+#define IIO_SCRATCH_BIT0_5      0x0000000000000020UL
+#define IIO_SCRATCH_BIT0_6      0x0000000000000040UL
+#define IIO_SCRATCH_BIT0_7      0x0000000000000080UL
+#define IIO_SCRATCH_BIT0_8      0x0000000000000100UL
+#define IIO_SCRATCH_BIT0_9      0x0000000000000200UL
+#define IIO_SCRATCH_BIT0_A      0x0000000000000400UL
+
+#define IIO_SCRATCH_BIT1_0      0x0000000000000001UL
+#define IIO_SCRATCH_BIT1_1      0x0000000000000002UL
+/* IO Translation Table Entries */
+#define IIO_NUM_ITTES   7               /* ITTEs numbered 0..6 */
+                                        /* Hw manuals number them 1..7! */
+/*
+ * IIO_IMEM Register fields.
+ */
+#define IIO_IMEM_W0ESD  0x1UL             /* Widget 0 shut down due to error */
+#define IIO_IMEM_B0ESD  (1UL << 4)        /* BTE 0 shut down due to error */
+#define IIO_IMEM_B1ESD  (1UL << 8)        /* BTE 1 Shut down due to error */
+
+/*
+ * As a permanent workaround for a bug in the PI side of the shub, we've
+ * redefined big window 7 as small window 0.
+ XXX does this still apply for SN1??
+ */
+#define HUB_NUM_BIG_WINDOW      (IIO_NUM_ITTES - 1)
+
+/*
+ * Use the top big window as a surrogate for the first small window
+ */
+#define SWIN0_BIGWIN            HUB_NUM_BIG_WINDOW
+
+#define ILCSR_WARM_RESET        0x100
+
+/*
+ * CRB manipulation macros
+ *      The CRB macros are slightly complicated, since there are up to
+ *      four registers associated with each CRB entry.
+ */
+#define IIO_NUM_CRBS            15      /* Number of CRBs */
+#define IIO_NUM_PC_CRBS         4       /* Number of partial cache CRBs */
+#define IIO_ICRB_OFFSET         8
+#define IIO_ICRB_0              IIO_ICRB0_A
+#define IIO_ICRB_ADDR_SHFT	2	/* Shift to get proper address */
+/* XXX - This is now tuneable:
+        #define IIO_FIRST_PC_ENTRY 12
+ */
+
+#define IIO_ICRB_A(_x)  ((u64)(IIO_ICRB_0 + (6 * IIO_ICRB_OFFSET * (_x))))
+#define IIO_ICRB_B(_x)  ((u64)((char *)IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET))
+#define IIO_ICRB_C(_x)  ((u64)((char *)IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET))
+#define IIO_ICRB_D(_x)  ((u64)((char *)IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET))
+#define IIO_ICRB_E(_x)  ((u64)((char *)IIO_ICRB_A(_x) + 4*IIO_ICRB_OFFSET))
+
+#define TNUM_TO_WIDGET_DEV(_tnum)	(_tnum & 0x7)
+
+/*
+ * values for "ecode" field
+ */
+#define IIO_ICRB_ECODE_DERR     0       /* Directory error due to IIO access */
+#define IIO_ICRB_ECODE_PERR     1       /* Poison error on IO access */
+#define IIO_ICRB_ECODE_WERR     2       /* Write error by IIO access
+                                         * e.g. WINV to a Read only line. */
+#define IIO_ICRB_ECODE_AERR     3       /* Access error caused by IIO access */
+#define IIO_ICRB_ECODE_PWERR    4       /* Error on partial write       */
+#define IIO_ICRB_ECODE_PRERR    5       /* Error on partial read        */
+#define IIO_ICRB_ECODE_TOUT     6       /* CRB timeout before deallocating */
+#define IIO_ICRB_ECODE_XTERR    7       /* Incoming xtalk pkt had error bit */
+
+/*
+ * Values for field imsgtype
+ */
+#define IIO_ICRB_IMSGT_XTALK    0       /* Incoming Meessage from Xtalk */
+#define IIO_ICRB_IMSGT_BTE      1       /* Incoming message from BTE    */
+#define IIO_ICRB_IMSGT_SN1NET   2       /* Incoming message from SN1 net */
+#define IIO_ICRB_IMSGT_CRB      3       /* Incoming message from CRB ???  */
+
+/*
+ * values for field initiator.
+ */
+#define IIO_ICRB_INIT_XTALK     0       /* Message originated in xtalk  */
+#define IIO_ICRB_INIT_BTE0      0x1     /* Message originated in BTE 0  */
+#define IIO_ICRB_INIT_SN1NET    0x2     /* Message originated in SN1net */
+#define IIO_ICRB_INIT_CRB       0x3     /* Message originated in CRB ?  */
+#define IIO_ICRB_INIT_BTE1      0x5     /* MEssage originated in BTE 1  */
+
+/*
+ * Number of credits Hub widget has while sending req/response to
+ * xbow.
+ * Value of 3 is required by Xbow 1.1
+ * We may be able to increase this to 4 with Xbow 1.2.
+ */
+#define       HUBII_XBOW_CREDIT       3
+#define       HUBII_XBOW_REV2_CREDIT  4
+
+/*
+ * Number of credits that xtalk devices should use when communicating
+ * with a SHub (depth of SHub's queue).
+ */
+#define HUB_CREDIT 4
+
+/*
+ * Some IIO_PRB fields
+ */
+#define IIO_PRB_MULTI_ERR	(1LL << 63)
+#define IIO_PRB_SPUR_RD		(1LL << 51)
+#define IIO_PRB_SPUR_WR		(1LL << 50)
+#define IIO_PRB_RD_TO		(1LL << 49)
+#define IIO_PRB_ERROR		(1LL << 48)
+
+/*************************************************************************
+
+ Some of the IIO field masks and shifts are defined here.
+ This is in order to maintain compatibility in SN0 and SN1 code
+ 
+**************************************************************************/
+
+/*
+ * ICMR register fields
+ * (Note: the IIO_ICMR_P_CNT and IIO_ICMR_PC_VLD from Hub are not
+ * present in SHub)
+ */
+
+#define IIO_ICMR_CRB_VLD_SHFT   20
+#define IIO_ICMR_CRB_VLD_MASK   (0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
+
+#define IIO_ICMR_FC_CNT_SHFT    16
+#define IIO_ICMR_FC_CNT_MASK    (0xf << IIO_ICMR_FC_CNT_SHFT)
+
+#define IIO_ICMR_C_CNT_SHFT     4
+#define IIO_ICMR_C_CNT_MASK     (0xf << IIO_ICMR_C_CNT_SHFT)
+
+#define IIO_ICMR_PRECISE        (1UL << 52)
+#define IIO_ICMR_CLR_RPPD       (1UL << 13)
+#define IIO_ICMR_CLR_RQPD       (1UL << 12)
+
+/*
+ * IIO PIO Deallocation register field masks : (IIO_IPDR)
+ XXX present but not needed in bedrock?  See the manual.
+ */
+#define IIO_IPDR_PND    (1 << 4)
+
+/*
+ * IIO CRB deallocation register field masks: (IIO_ICDR)
+ */
+#define IIO_ICDR_PND    (1 << 4)
+
+/* 
+ * IO BTE Length/Status (IIO_IBLS) register bit field definitions
+ */
+#define IBLS_BUSY		(0x1UL << 20)
+#define IBLS_ERROR_SHFT		16
+#define IBLS_ERROR		(0x1UL << IBLS_ERROR_SHFT)
+#define IBLS_LENGTH_MASK	0xffff
+
+/*
+ * IO BTE Control/Terminate register (IBCT) register bit field definitions
+ */
+#define IBCT_POISON		(0x1UL << 8)
+#define IBCT_NOTIFY		(0x1UL << 4)
+#define IBCT_ZFIL_MODE		(0x1UL << 0)
+
+/*
+ * IIO Incoming Error Packet Header (IIO_IIEPH1/IIO_IIEPH2)
+ */
+#define IIEPH1_VALID		(1UL << 44)
+#define IIEPH1_OVERRUN		(1UL << 40)
+#define IIEPH1_ERR_TYPE_SHFT	32
+#define IIEPH1_ERR_TYPE_MASK	0xf
+#define IIEPH1_SOURCE_SHFT	20
+#define IIEPH1_SOURCE_MASK	11
+#define IIEPH1_SUPPL_SHFT	8
+#define IIEPH1_SUPPL_MASK	11
+#define IIEPH1_CMD_SHFT		0
+#define IIEPH1_CMD_MASK		7
+
+#define IIEPH2_TAIL		(1UL << 40)
+#define IIEPH2_ADDRESS_SHFT	0
+#define IIEPH2_ADDRESS_MASK	38
+
+#define IIEPH1_ERR_SHORT_REQ	2
+#define IIEPH1_ERR_SHORT_REPLY	3
+#define IIEPH1_ERR_LONG_REQ	4
+#define IIEPH1_ERR_LONG_REPLY	5
+
+/*
+ * IO Error Clear register bit field definitions
+ */
+#define IECLR_PI1_FWD_INT	(1UL << 31)  /* clear PI1_FORWARD_INT in iidsr */
+#define IECLR_PI0_FWD_INT	(1UL << 30)  /* clear PI0_FORWARD_INT in iidsr */
+#define IECLR_SPUR_RD_HDR	(1UL << 29)  /* clear valid bit in ixss reg */
+#define IECLR_BTE1		(1UL << 18)  /* clear bte error 1 */
+#define IECLR_BTE0		(1UL << 17)  /* clear bte error 0 */
+#define IECLR_CRAZY		(1UL << 16)  /* clear crazy bit in wstat reg */
+#define IECLR_PRB_F		(1UL << 15)  /* clear err bit in PRB_F reg */
+#define IECLR_PRB_E		(1UL << 14)  /* clear err bit in PRB_E reg */
+#define IECLR_PRB_D		(1UL << 13)  /* clear err bit in PRB_D reg */
+#define IECLR_PRB_C		(1UL << 12)  /* clear err bit in PRB_C reg */
+#define IECLR_PRB_B		(1UL << 11)  /* clear err bit in PRB_B reg */
+#define IECLR_PRB_A		(1UL << 10)  /* clear err bit in PRB_A reg */
+#define IECLR_PRB_9		(1UL << 9)   /* clear err bit in PRB_9 reg */
+#define IECLR_PRB_8		(1UL << 8)   /* clear err bit in PRB_8 reg */
+#define IECLR_PRB_0		(1UL << 0)   /* clear err bit in PRB_0 reg */
+
+/*
+ * IIO CRB control register Fields: IIO_ICCR 
+ */
+#define	IIO_ICCR_PENDING	(0x10000)
+#define	IIO_ICCR_CMD_MASK	(0xFF)
+#define	IIO_ICCR_CMD_SHFT	(7)
+#define	IIO_ICCR_CMD_NOP	(0x0)	/* No Op */
+#define	IIO_ICCR_CMD_WAKE	(0x100) /* Reactivate CRB entry and process */
+#define	IIO_ICCR_CMD_TIMEOUT	(0x200)	/* Make CRB timeout & mark invalid */
+#define	IIO_ICCR_CMD_EJECT	(0x400)	/* Contents of entry written to memory 
+					 * via a WB
+					 */
+#define	IIO_ICCR_CMD_FLUSH	(0x800)
+
+/*
+ *
+ * CRB Register description.
+ *
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ *
+ * Many of the fields in CRB are status bits used by hardware
+ * for implementation of the protocol. It's very dangerous to
+ * mess around with the CRB registers.
+ *
+ * It's OK to read the CRB registers and try to make sense out of the
+ * fields in CRB.
+ *
+ * Updating CRB requires all activities in Hub IIO to be quiesced.
+ * otherwise, a write to CRB could corrupt other CRB entries.
+ * CRBs are here only as a back door peek to shub IIO's status.
+ * Quiescing implies  no dmas no PIOs
+ * either directly from the cpu or from sn0net.
+ * this is not something that can be done easily. So, AVOID updating
+ * CRBs.
+ */
+
+/*
+ * Easy access macros for CRBs, all 5 registers (A-E)
+ */
+typedef ii_icrb0_a_u_t icrba_t;
+#define a_sidn          ii_icrb0_a_fld_s.ia_sidn
+#define a_tnum          ii_icrb0_a_fld_s.ia_tnum
+#define a_addr          ii_icrb0_a_fld_s.ia_addr
+#define a_valid         ii_icrb0_a_fld_s.ia_vld
+#define a_iow           ii_icrb0_a_fld_s.ia_iow
+#define a_regvalue	ii_icrb0_a_regval
+
+typedef ii_icrb0_b_u_t icrbb_t;
+#define b_use_old       ii_icrb0_b_fld_s.ib_use_old
+#define b_imsgtype      ii_icrb0_b_fld_s.ib_imsgtype
+#define b_imsg          ii_icrb0_b_fld_s.ib_imsg
+#define b_initiator     ii_icrb0_b_fld_s.ib_init
+#define b_exc           ii_icrb0_b_fld_s.ib_exc
+#define b_ackcnt        ii_icrb0_b_fld_s.ib_ack_cnt
+#define b_resp          ii_icrb0_b_fld_s.ib_resp
+#define b_ack           ii_icrb0_b_fld_s.ib_ack
+#define b_hold          ii_icrb0_b_fld_s.ib_hold
+#define b_wb            ii_icrb0_b_fld_s.ib_wb
+#define b_intvn         ii_icrb0_b_fld_s.ib_intvn
+#define b_stall_ib      ii_icrb0_b_fld_s.ib_stall_ib
+#define b_stall_int     ii_icrb0_b_fld_s.ib_stall__intr
+#define b_stall_bte_0   ii_icrb0_b_fld_s.ib_stall__bte_0
+#define b_stall_bte_1   ii_icrb0_b_fld_s.ib_stall__bte_1
+#define b_error         ii_icrb0_b_fld_s.ib_error
+#define b_ecode         ii_icrb0_b_fld_s.ib_errcode
+#define b_lnetuce       ii_icrb0_b_fld_s.ib_ln_uce
+#define b_mark          ii_icrb0_b_fld_s.ib_mark
+#define b_xerr          ii_icrb0_b_fld_s.ib_xt_err
+#define b_regvalue	ii_icrb0_b_regval
+
+typedef ii_icrb0_c_u_t icrbc_t;
+#define c_suppl         ii_icrb0_c_fld_s.ic_suppl
+#define c_barrop        ii_icrb0_c_fld_s.ic_bo
+#define c_doresp        ii_icrb0_c_fld_s.ic_resprqd
+#define c_gbr           ii_icrb0_c_fld_s.ic_gbr
+#define c_btenum        ii_icrb0_c_fld_s.ic_bte_num
+#define c_cohtrans      ii_icrb0_c_fld_s.ic_ct
+#define c_xtsize        ii_icrb0_c_fld_s.ic_size
+#define c_source        ii_icrb0_c_fld_s.ic_source
+#define c_regvalue	ii_icrb0_c_regval
+
+
+typedef ii_icrb0_d_u_t icrbd_t;
+#define d_sleep         ii_icrb0_d_fld_s.id_sleep
+#define d_pricnt        ii_icrb0_d_fld_s.id_pr_cnt
+#define d_pripsc        ii_icrb0_d_fld_s.id_pr_psc
+#define d_bteop         ii_icrb0_d_fld_s.id_bte_op
+#define d_bteaddr       ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names*/
+#define d_benable       ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names*/
+#define d_regvalue	ii_icrb0_d_regval
+
+typedef ii_icrb0_e_u_t icrbe_t;
+#define icrbe_ctxtvld   ii_icrb0_e_fld_s.ie_cvld
+#define icrbe_toutvld   ii_icrb0_e_fld_s.ie_tvld
+#define icrbe_context   ii_icrb0_e_fld_s.ie_context
+#define icrbe_timeout   ii_icrb0_e_fld_s.ie_timeout
+#define e_regvalue	ii_icrb0_e_regval
+
+
+/* Number of widgets supported by shub */
+#define HUB_NUM_WIDGET          9
+#define HUB_WIDGET_ID_MIN       0x8
+#define HUB_WIDGET_ID_MAX       0xf
+
+#define HUB_WIDGET_PART_NUM     0xc120
+#define MAX_HUBS_PER_XBOW       2
+
+/* A few more #defines for backwards compatibility */
+#define iprb_t          ii_iprb0_u_t
+#define iprb_regval     ii_iprb0_regval
+#define iprb_mult_err	ii_iprb0_fld_s.i_mult_err
+#define iprb_spur_rd	ii_iprb0_fld_s.i_spur_rd
+#define iprb_spur_wr	ii_iprb0_fld_s.i_spur_wr
+#define iprb_rd_to	ii_iprb0_fld_s.i_rd_to
+#define iprb_ovflow     ii_iprb0_fld_s.i_of_cnt
+#define iprb_error      ii_iprb0_fld_s.i_error
+#define iprb_ff         ii_iprb0_fld_s.i_f
+#define iprb_mode       ii_iprb0_fld_s.i_m
+#define iprb_bnakctr    ii_iprb0_fld_s.i_nb
+#define iprb_anakctr    ii_iprb0_fld_s.i_na
+#define iprb_xtalkctr   ii_iprb0_fld_s.i_c
+
+#define LNK_STAT_WORKING        0x2		/* LLP is working */
+
+#define IIO_WSTAT_ECRAZY        (1ULL << 32)    /* Hub gone crazy */
+#define IIO_WSTAT_TXRETRY       (1ULL << 9)     /* Hub Tx Retry timeout */
+#define IIO_WSTAT_TXRETRY_MASK  (0x7F)   /* should be 0xFF?? */
+#define IIO_WSTAT_TXRETRY_SHFT  (16)
+#define IIO_WSTAT_TXRETRY_CNT(w)        (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
+                                          IIO_WSTAT_TXRETRY_MASK)
+
+/* Number of II perf. counters we can multiplex at once */
+
+#define IO_PERF_SETS	32
+
+/* Bit for the widget in inbound access register */
+#define IIO_IIWA_WIDGET(_w)     ((uint64_t)(1ULL << _w))
+/* Bit for the widget in outbound access register */
+#define IIO_IOWA_WIDGET(_w)     ((uint64_t)(1ULL << _w))
+
+/* NOTE: The following define assumes that we are going to get
+ * widget numbers from 8 thru F and the device numbers within
+ * widget from 0 thru 7.
+ */
+#define IIO_IIDEM_WIDGETDEV_MASK(w, d)  ((uint64_t)(1ULL << (8 * ((w) - 8) + (d))))
+
+/* IO Interrupt Destination Register */
+#define IIO_IIDSR_SENT_SHIFT    28
+#define IIO_IIDSR_SENT_MASK     0x30000000
+#define IIO_IIDSR_ENB_SHIFT     24
+#define IIO_IIDSR_ENB_MASK      0x01000000
+#define IIO_IIDSR_NODE_SHIFT    9
+#define IIO_IIDSR_NODE_MASK     0x000ff700
+#define IIO_IIDSR_PI_ID_SHIFT   8
+#define IIO_IIDSR_PI_ID_MASK    0x00000100
+#define IIO_IIDSR_LVL_SHIFT     0
+#define IIO_IIDSR_LVL_MASK      0x000000ff
+
+/* Xtalk timeout threshhold register (IIO_IXTT) */
+#define IXTT_RRSP_TO_SHFT	55	   /* read response timeout */
+#define IXTT_RRSP_TO_MASK	(0x1FULL << IXTT_RRSP_TO_SHFT)
+#define IXTT_RRSP_PS_SHFT	32	   /* read responsed TO prescalar */
+#define IXTT_RRSP_PS_MASK	(0x7FFFFFULL << IXTT_RRSP_PS_SHFT)
+#define IXTT_TAIL_TO_SHFT	0	   /* tail timeout counter threshold */
+#define IXTT_TAIL_TO_MASK	(0x3FFFFFFULL << IXTT_TAIL_TO_SHFT)
+
+/*
+ * The IO LLP control status register and widget control register
+ */
+
+typedef union hubii_wcr_u {
+        uint64_t      wcr_reg_value;
+        struct {
+	  uint64_t	wcr_widget_id:   4,     /* LLP crossbar credit */
+			wcr_tag_mode:	 1,	/* Tag mode */
+			wcr_rsvd1:	 8,	/* Reserved */
+			wcr_xbar_crd:	 3,	/* LLP crossbar credit */
+			wcr_f_bad_pkt:	 1,	/* Force bad llp pkt enable */
+			wcr_dir_con:	 1,	/* widget direct connect */
+			wcr_e_thresh:	 5,	/* elasticity threshold */
+			wcr_rsvd:	41;	/* unused */
+        } wcr_fields_s;
+} hubii_wcr_t;
+
+#define iwcr_dir_con    wcr_fields_s.wcr_dir_con
+
+/* The structures below are defined to extract and modify the ii
+performance registers */
+
+/* io_perf_sel allows the caller to specify what tests will be
+   performed */
+
+typedef union io_perf_sel {
+        uint64_t perf_sel_reg;
+        struct {
+               uint64_t	perf_ippr0 :  4,
+				perf_ippr1 :  4,
+				perf_icct  :  8,
+				perf_rsvd  : 48;
+        } perf_sel_bits;
+} io_perf_sel_t;
+
+/* io_perf_cnt is to extract the count from the shub registers. Due to
+   hardware problems there is only one counter, not two. */
+
+typedef union io_perf_cnt {
+        uint64_t      perf_cnt;
+        struct {
+               uint64_t	perf_cnt   : 20,
+				perf_rsvd2 : 12,
+				perf_rsvd1 : 32;
+        } perf_cnt_bits;
+
+} io_perf_cnt_t;
+
+typedef union iprte_a {
+	uint64_t	entry;
+	struct {
+		uint64_t	i_rsvd_1                  :	 3;
+		uint64_t	i_addr			  :	38;
+		uint64_t	i_init			  :	 3;
+		uint64_t	i_source		  :	 8;
+		uint64_t	i_rsvd			  :	 2;
+		uint64_t	i_widget		  :	 4;
+		uint64_t	i_to_cnt		  :	 5;
+		uint64_t       i_vld                     :      1;
+	} iprte_fields;
+} iprte_a_t;
+
+#endif /* _ASM_IA64_SN_SHUBIO_H */
+
diff --git a/include/asm-ia64/sn/simulator.h b/include/asm-ia64/sn/simulator.h
new file mode 100644
index 000000000000..78eb4f869c8b
--- /dev/null
+++ b/include/asm-ia64/sn/simulator.h
@@ -0,0 +1,27 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SIMULATOR_H
+#define _ASM_IA64_SN_SIMULATOR_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_IA64_SGI_SN_SIM
+
+#define SNMAGIC 0xaeeeeeee8badbeefL
+#define IS_RUNNING_ON_SIMULATOR() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
+
+#define SIMULATOR_SLEEP()	asm("nop.i 0x8beef")
+
+#else
+
+#define IS_RUNNING_ON_SIMULATOR()	(0)
+#define SIMULATOR_SLEEP()
+
+#endif
+
+#endif /* _ASM_IA64_SN_SIMULATOR_H */
diff --git a/include/asm-ia64/sn/sn2/sn_hwperf.h b/include/asm-ia64/sn/sn2/sn_hwperf.h
new file mode 100644
index 000000000000..b0c4d6dd77ba
--- /dev/null
+++ b/include/asm-ia64/sn/sn2/sn_hwperf.h
@@ -0,0 +1,226 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved.
+ *
+ * Data types used by the SN_SAL_HWPERF_OP SAL call for monitoring
+ * SGI Altix node and router hardware
+ *
+ * Mark Goodwin <markgw@sgi.com> Mon Aug 30 12:23:46 EST 2004
+ */
+
+#ifndef SN_HWPERF_H
+#define SN_HWPERF_H
+
+/*
+ * object structure. SN_HWPERF_ENUM_OBJECTS and SN_HWPERF_GET_CPU_INFO
+ * return an array of these. Do not change this without also
+ * changing the corresponding SAL code.
+ */
+#define SN_HWPERF_MAXSTRING		128
+struct sn_hwperf_object_info {
+	u32 id;
+	union {
+		struct {
+			u64 this_part:1;
+			u64 is_shared:1;
+		} fields;
+		struct {
+			u64 flags;
+			u64 reserved;
+		} b;
+	} f;
+	char name[SN_HWPERF_MAXSTRING];
+	char location[SN_HWPERF_MAXSTRING];
+	u32 ports;
+};
+
+#define sn_hwp_this_part	f.fields.this_part
+#define sn_hwp_is_shared	f.fields.is_shared
+#define sn_hwp_flags		f.b.flags
+
+/* macros for object classification */
+#define SN_HWPERF_IS_NODE(x)		((x) && strstr((x)->name, "SHub"))
+#define SN_HWPERF_IS_IONODE(x)		((x) && strstr((x)->name, "TIO"))
+#define SN_HWPERF_IS_ROUTER(x)		((x) && strstr((x)->name, "Router"))
+#define SN_HWPERF_IS_NL3ROUTER(x)	((x) && strstr((x)->name, "NL3Router"))
+#define SN_HWPERF_FOREIGN(x)		((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared)
+#define SN_HWPERF_SAME_OBJTYPE(x,y)	((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\
+					(SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\
+					(SN_HWPERF_IS_ROUTER(x) && SN_HWPERF_IS_ROUTER(y)))
+
+/* numa port structure, SN_HWPERF_ENUM_PORTS returns an array of these */
+struct sn_hwperf_port_info {
+	u32 port;
+	u32 conn_id;
+	u32 conn_port;
+};
+
+/* for HWPERF_{GET,SET}_MMRS */
+struct sn_hwperf_data {
+	u64 addr;
+	u64 data;
+};
+
+/* user ioctl() argument, see below */
+struct sn_hwperf_ioctl_args {
+        u64 arg;		/* argument, usually an object id */
+        u64 sz;                 /* size of transfer */
+        void *ptr;              /* pointer to source/target */
+        u32 v0;			/* second return value */
+};
+
+/*
+ * For SN_HWPERF_{GET,SET}_MMRS and SN_HWPERF_OBJECT_DISTANCE,
+ * sn_hwperf_ioctl_args.arg can be used to specify a CPU on which
+ * to call SAL, and whether to use an interprocessor interrupt
+ * or task migration in order to do so. If the CPU specified is
+ * SN_HWPERF_ARG_ANY_CPU, then the current CPU will be used.
+ */
+#define SN_HWPERF_ARG_ANY_CPU		0x7fffffffUL
+#define SN_HWPERF_ARG_CPU_MASK		0x7fffffff00000000ULL
+#define SN_HWPERF_ARG_USE_IPI_MASK	0x8000000000000000ULL
+#define SN_HWPERF_ARG_OBJID_MASK	0x00000000ffffffffULL
+
+/* 
+ * ioctl requests on the "sn_hwperf" misc device that call SAL.
+ */
+#define SN_HWPERF_OP_MEM_COPYIN		0x1000
+#define SN_HWPERF_OP_MEM_COPYOUT	0x2000
+#define SN_HWPERF_OP_MASK		0x0fff
+
+/*
+ * Determine mem requirement.
+ * arg	don't care
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define	SN_HWPERF_GET_HEAPSIZE		1
+
+/*
+ * Install mem for SAL drvr
+ * arg	don't care
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to buffer for scratch area
+ */
+#define SN_HWPERF_INSTALL_HEAP		2
+
+/*
+ * Determine number of objects
+ * arg	don't care
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_OBJECT_COUNT		(10|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Determine object "distance", relative to a cpu. This operation can
+ * execute on a designated logical cpu number, using either an IPI or
+ * via task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
+ * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
+ *
+ * arg	bitmap of IPI flag, cpu number and object id
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_OBJECT_DISTANCE	(11|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Enumerate objects. Special case if sz == 8, returns the required
+ * buffer size.
+ * arg	don't care
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_object_info
+ */
+#define SN_HWPERF_ENUM_OBJECTS		(12|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Enumerate NumaLink ports for an object. Special case if sz == 8,
+ * returns the required buffer size.
+ * arg	object id
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_port_info
+ */
+#define SN_HWPERF_ENUM_PORTS		(13|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * SET/GET memory mapped registers. These operations can execute
+ * on a designated logical cpu number, using either an IPI or via
+ * task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
+ * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
+ *
+ * arg	bitmap of ipi flag, cpu number and object id
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_data
+ */
+#define SN_HWPERF_SET_MMRS		(14|SN_HWPERF_OP_MEM_COPYIN)
+#define SN_HWPERF_GET_MMRS		(15|SN_HWPERF_OP_MEM_COPYOUT| \
+					    SN_HWPERF_OP_MEM_COPYIN)
+/*
+ * Lock a shared object
+ * arg	object id
+ * sz	don't care
+ * p	don't care
+ */
+#define SN_HWPERF_ACQUIRE		16
+
+/*
+ * Unlock a shared object
+ * arg	object id
+ * sz	don't care
+ * p	don't care
+ */
+#define SN_HWPERF_RELEASE		17
+
+/*
+ * Break a lock on a shared object
+ * arg	object id
+ * sz	don't care
+ * p	don't care
+ */
+#define SN_HWPERF_FORCE_RELEASE		18
+
+/*
+ * ioctl requests on "sn_hwperf" that do not call SAL
+ */
+
+/*
+ * get cpu info as an array of hwperf_object_info_t. 
+ * id is logical CPU number, name is description, location
+ * is geoid (e.g. 001c04#1c). Special case if sz == 8,
+ * returns the required buffer size.
+ *
+ * arg	don't care
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_object_info
+ */
+#define SN_HWPERF_GET_CPU_INFO		(100|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Given an object id, return it's node number (aka cnode).
+ * arg	object id
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_GET_OBJ_NODE		(101|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Given a node number (cnode), return it's nasid.
+ * arg	ordinal node number (aka cnodeid)
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_GET_NODE_NASID	(102|SN_HWPERF_OP_MEM_COPYOUT)
+
+/* return codes */
+#define SN_HWPERF_OP_OK			0
+#define SN_HWPERF_OP_NOMEM		1
+#define SN_HWPERF_OP_NO_PERM		2
+#define SN_HWPERF_OP_IO_ERROR		3
+#define SN_HWPERF_OP_BUSY		4
+#define SN_HWPERF_OP_RECONFIGURE	253
+#define SN_HWPERF_OP_INVAL		254
+
+#endif				/* SN_HWPERF_H */
diff --git a/include/asm-ia64/sn/sn_cpuid.h b/include/asm-ia64/sn/sn_cpuid.h
new file mode 100644
index 000000000000..685435af170d
--- /dev/null
+++ b/include/asm-ia64/sn/sn_cpuid.h
@@ -0,0 +1,144 @@
+/* 
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+
+#ifndef _ASM_IA64_SN_SN_CPUID_H
+#define _ASM_IA64_SN_SN_CPUID_H
+
+#include <linux/config.h>
+#include <linux/smp.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/pda.h>
+#include <asm/intrinsics.h>
+
+
+/*
+ * Functions for converting between cpuids, nodeids and NASIDs.
+ * 
+ * These are for SGI platforms only.
+ *
+ */
+
+
+
+
+/*
+ *  Definitions of terms (these definitions are for IA64 ONLY. Other architectures
+ *  use cpuid/cpunum quite defferently):
+ *
+ *	   CPUID - a number in range of 0..NR_CPUS-1 that uniquely identifies
+ *		the cpu. The value cpuid has no significance on IA64 other than
+ *		the boot cpu is 0.
+ *			smp_processor_id() returns the cpuid of the current cpu.
+ *
+ * 	   CPU_PHYSICAL_ID (also known as HARD_PROCESSOR_ID)
+ *		This is the same as 31:24 of the processor LID register
+ *			hard_smp_processor_id()- cpu_physical_id of current processor
+ *			cpu_physical_id(cpuid) - convert a <cpuid> to a <physical_cpuid>
+ *			cpu_logical_id(phy_id) - convert a <physical_cpuid> to a <cpuid> 
+ *				* not real efficient - don't use in perf critical code
+ *
+ *         SLICE - a number in the range of 0 - 3 (typically) that represents the
+ *		cpu number on a brick.
+ *
+ *	   SUBNODE - (almost obsolete) the number of the FSB that a cpu is
+ *		connected to. This is also the same as the PI number. Usually 0 or 1.
+ *
+ *	NOTE!!!: the value of the bits in the cpu physical id (SAPICid or LID) of a cpu has no 
+ *	significance. The SAPIC id (LID) is a 16-bit cookie that has meaning only to the PROM.
+ *
+ *
+ * The macros convert between cpu physical ids & slice/nasid/cnodeid.
+ * These terms are described below:
+ *
+ *
+ * Brick
+ *          -----   -----           -----   -----       CPU
+ *          | 0 |   | 1 |           | 0 |   | 1 |       SLICE
+ *          -----   -----           -----   -----
+ *            |       |               |       |
+ *            |       |               |       |
+ *          0 |       | 2           0 |       | 2       FSB SLOT
+ *             -------                 -------  
+ *                |                       |
+ *                |                       |
+ *                |                       |
+ *             ------------      -------------
+ *             |          |      |           |
+ *             |    SHUB  |      |   SHUB    |        NASID   (0..MAX_NASIDS)
+ *             |          |----- |           |        CNODEID (0..num_compact_nodes-1)
+ *             |          |      |           |
+ *             |          |      |           |
+ *             ------------      -------------
+ *                   |                 |
+ *                           
+ *
+ */
+
+#ifndef CONFIG_SMP
+#define cpu_physical_id(cpuid)			((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
+#endif
+
+
+#define get_node_number(addr)			NASID_GET(addr)
+
+/*
+ * NOTE: on non-MP systems, only cpuid 0 exists
+ */
+
+extern short physical_node_map[];			/* indexed by nasid to get cnode */
+
+/*
+ * Macros for retrieving info about current cpu
+ */
+#define get_nasid()			(nodepda->phys_cpuid[smp_processor_id()].nasid)
+#define get_subnode()			(nodepda->phys_cpuid[smp_processor_id()].subnode)
+#define get_slice()			(nodepda->phys_cpuid[smp_processor_id()].slice)
+#define get_cnode()			(nodepda->phys_cpuid[smp_processor_id()].cnode)
+#define get_sapicid()			((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
+
+/*
+ * Macros for retrieving info about an arbitrary cpu
+ *	cpuid - logical cpu id
+ */
+#define cpuid_to_nasid(cpuid)		(nodepda->phys_cpuid[cpuid].nasid)
+#define cpuid_to_subnode(cpuid)		(nodepda->phys_cpuid[cpuid].subnode)
+#define cpuid_to_slice(cpuid)		(nodepda->phys_cpuid[cpuid].slice)
+#define cpuid_to_cnodeid(cpuid)		(physical_node_map[cpuid_to_nasid(cpuid)])
+
+
+/*
+ * Dont use the following in performance critical code. They require scans
+ * of potentially large tables.
+ */
+extern int nasid_slice_to_cpuid(int, int);
+#define nasid_slice_to_cpu_physical_id(nasid, slice)			\
+	cpu_physical_id(nasid_slice_to_cpuid(nasid, slice))
+
+/*
+ * cnodeid_to_nasid - convert a cnodeid to a NASID
+ *	Macro relies on pg_data for a node being on the node itself.
+ *	Just extract the NASID from the pointer.
+ *
+ */
+#define cnodeid_to_nasid(cnodeid)	pda->cnodeid_to_nasid_table[cnodeid]
+ 
+/*
+ * nasid_to_cnodeid - convert a NASID to a cnodeid
+ */
+#define nasid_to_cnodeid(nasid)		(physical_node_map[nasid])
+
+/*
+ * partition_coherence_id - get the coherence ID of the current partition
+ */
+extern u8 sn_coherency_id;
+#define partition_coherence_id()	(sn_coherency_id)
+
+#endif /* _ASM_IA64_SN_SN_CPUID_H */
+
diff --git a/include/asm-ia64/sn/sn_fru.h b/include/asm-ia64/sn/sn_fru.h
new file mode 100644
index 000000000000..8c21ac3f0156
--- /dev/null
+++ b/include/asm-ia64/sn/sn_fru.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992-1997,1999-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_SN_FRU_H
+#define _ASM_IA64_SN_SN_FRU_H
+
+#define MAX_DIMMS			8	 /* max # of dimm banks */
+#define MAX_PCIDEV			8	 /* max # of pci devices on a pci bus */
+
+typedef unsigned char confidence_t;
+
+typedef struct kf_mem_s {
+	confidence_t km_confidence; /* confidence level that the memory is bad
+				     * is this necessary ?
+				     */
+	confidence_t km_dimm[MAX_DIMMS];
+				    /* confidence level that dimm[i] is bad
+				     *I think this is the right number
+				     */
+
+} kf_mem_t;
+
+typedef struct kf_cpu_s {
+	confidence_t	kc_confidence; /* confidence level that cpu is bad */
+	confidence_t	kc_icache; /* confidence level that instr. cache is bad */
+	confidence_t	kc_dcache; /* confidence level that data   cache is bad */
+	confidence_t	kc_scache; /* confidence level that sec.   cache is bad */
+	confidence_t	kc_sysbus; /* confidence level that sysad/cmd/state bus is bad */
+} kf_cpu_t;
+
+
+typedef struct kf_pci_bus_s {
+	confidence_t	kpb_belief;	/* confidence level  that the  pci bus is bad */
+	confidence_t	kpb_pcidev_belief[MAX_PCIDEV];
+					/* confidence level that the pci dev is bad */
+} kf_pci_bus_t;
+
+
+#endif /* _ASM_IA64_SN_SN_FRU_H */
+
diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h
new file mode 100644
index 000000000000..88c31b53dc09
--- /dev/null
+++ b/include/asm-ia64/sn/sn_sal.h
@@ -0,0 +1,1015 @@
+#ifndef _ASM_IA64_SN_SN_SAL_H
+#define _ASM_IA64_SN_SN_SAL_H
+
+/*
+ * System Abstraction Layer definitions for IA64
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2004 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+
+#include <linux/config.h>
+#include <asm/sal.h>
+#include <asm/sn/sn_cpuid.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/geo.h>
+#include <asm/sn/nodepda.h>
+#include <asm/sn/shub_mmr.h>
+
+// SGI Specific Calls
+#define  SN_SAL_POD_MODE                           0x02000001
+#define  SN_SAL_SYSTEM_RESET                       0x02000002
+#define  SN_SAL_PROBE                              0x02000003
+#define  SN_SAL_GET_MASTER_NASID                   0x02000004
+#define	 SN_SAL_GET_KLCONFIG_ADDR		   0x02000005
+#define  SN_SAL_LOG_CE				   0x02000006
+#define  SN_SAL_REGISTER_CE			   0x02000007
+#define  SN_SAL_GET_PARTITION_ADDR		   0x02000009
+#define  SN_SAL_XP_ADDR_REGION			   0x0200000f
+#define  SN_SAL_NO_FAULT_ZONE_VIRTUAL		   0x02000010
+#define  SN_SAL_NO_FAULT_ZONE_PHYSICAL		   0x02000011
+#define  SN_SAL_PRINT_ERROR			   0x02000012
+#define  SN_SAL_SET_ERROR_HANDLING_FEATURES	   0x0200001a	// reentrant
+#define  SN_SAL_GET_FIT_COMPT			   0x0200001b	// reentrant
+#define  SN_SAL_GET_SN_INFO                        0x0200001c
+#define  SN_SAL_GET_SAPIC_INFO                     0x0200001d
+#define  SN_SAL_CONSOLE_PUTC                       0x02000021
+#define  SN_SAL_CONSOLE_GETC                       0x02000022
+#define  SN_SAL_CONSOLE_PUTS                       0x02000023
+#define  SN_SAL_CONSOLE_GETS                       0x02000024
+#define  SN_SAL_CONSOLE_GETS_TIMEOUT               0x02000025
+#define  SN_SAL_CONSOLE_POLL                       0x02000026
+#define  SN_SAL_CONSOLE_INTR                       0x02000027
+#define  SN_SAL_CONSOLE_PUTB			   0x02000028
+#define  SN_SAL_CONSOLE_XMIT_CHARS		   0x0200002a
+#define  SN_SAL_CONSOLE_READC			   0x0200002b
+#define  SN_SAL_SYSCTL_MODID_GET	           0x02000031
+#define  SN_SAL_SYSCTL_GET                         0x02000032
+#define  SN_SAL_SYSCTL_IOBRICK_MODULE_GET          0x02000033
+#define  SN_SAL_SYSCTL_IO_PORTSPEED_GET            0x02000035
+#define  SN_SAL_SYSCTL_SLAB_GET                    0x02000036
+#define  SN_SAL_BUS_CONFIG		   	   0x02000037
+#define  SN_SAL_SYS_SERIAL_GET			   0x02000038
+#define  SN_SAL_PARTITION_SERIAL_GET		   0x02000039
+#define  SN_SAL_SYSCTL_PARTITION_GET		   0x0200003a
+#define  SN_SAL_SYSTEM_POWER_DOWN		   0x0200003b
+#define  SN_SAL_GET_MASTER_BASEIO_NASID		   0x0200003c
+#define  SN_SAL_COHERENCE                          0x0200003d
+#define  SN_SAL_MEMPROTECT                         0x0200003e
+#define  SN_SAL_SYSCTL_FRU_CAPTURE		   0x0200003f
+
+#define  SN_SAL_SYSCTL_IOBRICK_PCI_OP		   0x02000042	// reentrant
+#define	 SN_SAL_IROUTER_OP			   0x02000043
+#define  SN_SAL_IOIF_INTERRUPT			   0x0200004a
+#define  SN_SAL_HWPERF_OP			   0x02000050   // lock
+#define  SN_SAL_IOIF_ERROR_INTERRUPT		   0x02000051
+
+#define  SN_SAL_IOIF_SLOT_ENABLE		   0x02000053
+#define  SN_SAL_IOIF_SLOT_DISABLE		   0x02000054
+#define  SN_SAL_IOIF_GET_HUBDEV_INFO		   0x02000055
+#define  SN_SAL_IOIF_GET_PCIBUS_INFO		   0x02000056
+#define  SN_SAL_IOIF_GET_PCIDEV_INFO		   0x02000057
+#define  SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST	   0x02000058
+
+#define SN_SAL_HUB_ERROR_INTERRUPT		   0x02000060
+
+
+/*
+ * Service-specific constants
+ */
+
+/* Console interrupt manipulation */
+	/* action codes */
+#define SAL_CONSOLE_INTR_OFF    0       /* turn the interrupt off */
+#define SAL_CONSOLE_INTR_ON     1       /* turn the interrupt on */
+#define SAL_CONSOLE_INTR_STATUS 2	/* retrieve the interrupt status */
+	/* interrupt specification & status return codes */
+#define SAL_CONSOLE_INTR_XMIT	1	/* output interrupt */
+#define SAL_CONSOLE_INTR_RECV	2	/* input interrupt */
+
+/* interrupt handling */
+#define SAL_INTR_ALLOC		1
+#define SAL_INTR_FREE		2
+
+/*
+ * IRouter (i.e. generalized system controller) operations
+ */
+#define SAL_IROUTER_OPEN	0	/* open a subchannel */
+#define SAL_IROUTER_CLOSE	1	/* close a subchannel */
+#define SAL_IROUTER_SEND	2	/* send part of an IRouter packet */
+#define SAL_IROUTER_RECV	3	/* receive part of an IRouter packet */
+#define SAL_IROUTER_INTR_STATUS	4	/* check the interrupt status for
+					 * an open subchannel
+					 */
+#define SAL_IROUTER_INTR_ON	5	/* enable an interrupt */
+#define SAL_IROUTER_INTR_OFF	6	/* disable an interrupt */
+#define SAL_IROUTER_INIT	7	/* initialize IRouter driver */
+
+/* IRouter interrupt mask bits */
+#define SAL_IROUTER_INTR_XMIT	SAL_CONSOLE_INTR_XMIT
+#define SAL_IROUTER_INTR_RECV	SAL_CONSOLE_INTR_RECV
+
+
+/*
+ * SAL Error Codes
+ */
+#define SALRET_MORE_PASSES	1
+#define SALRET_OK		0
+#define SALRET_NOT_IMPLEMENTED	(-1)
+#define SALRET_INVALID_ARG	(-2)
+#define SALRET_ERROR		(-3)
+
+
+/**
+ * sn_sal_rev_major - get the major SGI SAL revision number
+ *
+ * The SGI PROM stores its version in sal_[ab]_rev_(major|minor).
+ * This routine simply extracts the major value from the
+ * @ia64_sal_systab structure constructed by ia64_sal_init().
+ */
+static inline int
+sn_sal_rev_major(void)
+{
+	struct ia64_sal_systab *systab = efi.sal_systab;
+
+	return (int)systab->sal_b_rev_major;
+}
+
+/**
+ * sn_sal_rev_minor - get the minor SGI SAL revision number
+ *
+ * The SGI PROM stores its version in sal_[ab]_rev_(major|minor).
+ * This routine simply extracts the minor value from the
+ * @ia64_sal_systab structure constructed by ia64_sal_init().
+ */
+static inline int
+sn_sal_rev_minor(void)
+{
+	struct ia64_sal_systab *systab = efi.sal_systab;
+	
+	return (int)systab->sal_b_rev_minor;
+}
+
+/*
+ * Specify the minimum PROM revsion required for this kernel.
+ * Note that they're stored in hex format...
+ */
+#define SN_SAL_MIN_MAJOR	0x4  /* SN2 kernels need at least PROM 4.0 */
+#define SN_SAL_MIN_MINOR	0x0
+
+/*
+ * Returns the master console nasid, if the call fails, return an illegal
+ * value.
+ */
+static inline u64
+ia64_sn_get_console_nasid(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_NASID, 0, 0, 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	/* Master console nasid is in 'v0' */
+	return ret_stuff.v0;
+}
+
+/*
+ * Returns the master baseio nasid, if the call fails, return an illegal
+ * value.
+ */
+static inline u64
+ia64_sn_get_master_baseio_nasid(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_BASEIO_NASID, 0, 0, 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	/* Master baseio nasid is in 'v0' */
+	return ret_stuff.v0;
+}
+
+static inline char *
+ia64_sn_get_klconfig_addr(nasid_t nasid)
+{
+	struct ia64_sal_retval ret_stuff;
+	int cnodeid;
+
+	cnodeid = nasid_to_cnodeid(nasid);
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0);
+
+	/*
+	 * We should panic if a valid cnode nasid does not produce
+	 * a klconfig address.
+	 */
+	if (ret_stuff.status != 0) {
+		panic("ia64_sn_get_klconfig_addr: Returned error %lx\n", ret_stuff.status);
+	}
+	return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL;
+}
+
+/*
+ * Returns the next console character.
+ */
+static inline u64
+ia64_sn_console_getc(int *ch)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_GETC, 0, 0, 0, 0, 0, 0, 0);
+
+	/* character is in 'v0' */
+	*ch = (int)ret_stuff.v0;
+
+	return ret_stuff.status;
+}
+
+/*
+ * Read a character from the SAL console device, after a previous interrupt
+ * or poll operation has given us to know that a character is available
+ * to be read.
+ */
+static inline u64
+ia64_sn_console_readc(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_READC, 0, 0, 0, 0, 0, 0, 0);
+
+	/* character is in 'v0' */
+	return ret_stuff.v0;
+}
+
+/*
+ * Sends the given character to the console.
+ */
+static inline u64
+ia64_sn_console_putc(char ch)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (uint64_t)ch, 0, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Sends the given buffer to the console.
+ */
+static inline u64
+ia64_sn_console_putb(const char *buf, int len)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0; 
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (uint64_t)buf, (uint64_t)len, 0, 0, 0, 0, 0);
+
+	if ( ret_stuff.status == 0 ) {
+		return ret_stuff.v0;
+	}
+	return (u64)0;
+}
+
+/*
+ * Print a platform error record
+ */
+static inline u64
+ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (uint64_t)hook, (uint64_t)rec, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Check for Platform errors
+ */
+static inline u64
+ia64_sn_plat_cpei_handler(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_LOG_CE, 0, 0, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Checks for console input.
+ */
+static inline u64
+ia64_sn_console_check(int *result)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_POLL, 0, 0, 0, 0, 0, 0, 0);
+
+	/* result is in 'v0' */
+	*result = (int)ret_stuff.v0;
+
+	return ret_stuff.status;
+}
+
+/*
+ * Checks console interrupt status
+ */
+static inline u64
+ia64_sn_console_intr_status(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
+		 0, SAL_CONSOLE_INTR_STATUS,
+		 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status == 0) {
+	    return ret_stuff.v0;
+	}
+	
+	return 0;
+}
+
+/*
+ * Enable an interrupt on the SAL console device.
+ */
+static inline void
+ia64_sn_console_intr_enable(uint64_t intr)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
+		 intr, SAL_CONSOLE_INTR_ON,
+		 0, 0, 0, 0, 0);
+}
+
+/*
+ * Disable an interrupt on the SAL console device.
+ */
+static inline void
+ia64_sn_console_intr_disable(uint64_t intr)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
+		 intr, SAL_CONSOLE_INTR_OFF,
+		 0, 0, 0, 0, 0);
+}
+
+/*
+ * Sends a character buffer to the console asynchronously.
+ */
+static inline u64
+ia64_sn_console_xmit_chars(char *buf, int len)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS,
+		 (uint64_t)buf, (uint64_t)len,
+		 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status == 0) {
+	    return ret_stuff.v0;
+	}
+
+	return 0;
+}
+
+/*
+ * Returns the iobrick module Id
+ */
+static inline u64
+ia64_sn_sysctl_iobrick_module_get(nasid_t nasid, int *result)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYSCTL_IOBRICK_MODULE_GET, nasid, 0, 0, 0, 0, 0, 0);
+
+	/* result is in 'v0' */
+	*result = (int)ret_stuff.v0;
+
+	return ret_stuff.status;
+}
+
+/**
+ * ia64_sn_pod_mode - call the SN_SAL_POD_MODE function
+ *
+ * SN_SAL_POD_MODE actually takes an argument, but it's always
+ * 0 when we call it from the kernel, so we don't have to expose
+ * it to the caller.
+ */
+static inline u64
+ia64_sn_pod_mode(void)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0);
+	if (isrv.status)
+		return 0;
+	return isrv.v0;
+}
+
+/**
+ * ia64_sn_probe_mem - read from memory safely
+ * @addr: address to probe
+ * @size: number bytes to read (1,2,4,8)
+ * @data_ptr: address to store value read by probe (-1 returned if probe fails)
+ *
+ * Call into the SAL to do a memory read.  If the read generates a machine
+ * check, this routine will recover gracefully and return -1 to the caller.
+ * @addr is usually a kernel virtual address in uncached space (i.e. the
+ * address starts with 0xc), but if called in physical mode, @addr should
+ * be a physical address.
+ *
+ * Return values:
+ *  0 - probe successful
+ *  1 - probe failed (generated MCA)
+ *  2 - Bad arg
+ * <0 - PAL error
+ */
+static inline u64
+ia64_sn_probe_mem(long addr, long size, void *data_ptr)
+{
+	struct ia64_sal_retval isrv;
+
+	SAL_CALL(isrv, SN_SAL_PROBE, addr, size, 0, 0, 0, 0, 0);
+
+	if (data_ptr) {
+		switch (size) {
+		case 1:
+			*((u8*)data_ptr) = (u8)isrv.v0;
+			break;
+		case 2:
+			*((u16*)data_ptr) = (u16)isrv.v0;
+			break;
+		case 4:
+			*((u32*)data_ptr) = (u32)isrv.v0;
+			break;
+		case 8:
+			*((u64*)data_ptr) = (u64)isrv.v0;
+			break;
+		default:
+			isrv.status = 2;
+		}
+	}
+	return isrv.status;
+}
+
+/*
+ * Retrieve the system serial number as an ASCII string.
+ */
+static inline u64
+ia64_sn_sys_serial_get(char *buf)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYS_SERIAL_GET, buf, 0, 0, 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+extern char sn_system_serial_number_string[];
+extern u64 sn_partition_serial_number;
+
+static inline char *
+sn_system_serial_number(void) {
+	if (sn_system_serial_number_string[0]) {
+		return(sn_system_serial_number_string);
+	} else {
+		ia64_sn_sys_serial_get(sn_system_serial_number_string);
+		return(sn_system_serial_number_string);
+	}
+}
+	
+
+/*
+ * Returns a unique id number for this system and partition (suitable for
+ * use with license managers), based in part on the system serial number.
+ */
+static inline u64
+ia64_sn_partition_serial_get(void)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_PARTITION_SERIAL_GET, 0, 0, 0, 0, 0, 0, 0);
+	if (ret_stuff.status != 0)
+	    return 0;
+	return ret_stuff.v0;
+}
+
+static inline u64
+sn_partition_serial_number_val(void) {
+	if (sn_partition_serial_number) {
+		return(sn_partition_serial_number);
+	} else {
+		return(sn_partition_serial_number = ia64_sn_partition_serial_get());
+	}
+}
+
+/*
+ * Returns the partition id of the nasid passed in as an argument,
+ * or INVALID_PARTID if the partition id cannot be retrieved.
+ */
+static inline partid_t
+ia64_sn_sysctl_partition_get(nasid_t nasid)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_SYSCTL_PARTITION_GET, nasid,
+		 0, 0, 0, 0, 0, 0);
+	if (ret_stuff.status != 0)
+	    return INVALID_PARTID;
+	return ((partid_t)ret_stuff.v0);
+}
+
+/*
+ * Returns the partition id of the current processor.
+ */
+
+extern partid_t sn_partid;
+
+static inline partid_t
+sn_local_partid(void) {
+	if (sn_partid < 0) {
+		return (sn_partid = ia64_sn_sysctl_partition_get(cpuid_to_nasid(smp_processor_id())));
+	} else {
+		return sn_partid;
+	}
+}
+
+/*
+ * Register or unregister a physical address range being referenced across
+ * a partition boundary for which certain SAL errors should be scanned for,
+ * cleaned up and ignored.  This is of value for kernel partitioning code only.
+ * Values for the operation argument:
+ *	1 = register this address range with SAL
+ *	0 = unregister this address range with SAL
+ * 
+ * SAL maintains a reference count on an address range in case it is registered
+ * multiple times.
+ * 
+ * On success, returns the reference count of the address range after the SAL
+ * call has performed the current registration/unregistration.  Returns a
+ * negative value if an error occurred.
+ */
+static inline int
+sn_register_xp_addr_region(u64 paddr, u64 len, int operation)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_XP_ADDR_REGION, paddr, len, (u64)operation,
+		 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Register or unregister an instruction range for which SAL errors should
+ * be ignored.  If an error occurs while in the registered range, SAL jumps
+ * to return_addr after ignoring the error.  Values for the operation argument:
+ *	1 = register this instruction range with SAL
+ *	0 = unregister this instruction range with SAL
+ *
+ * Returns 0 on success, or a negative value if an error occurred.
+ */
+static inline int
+sn_register_nofault_code(u64 start_addr, u64 end_addr, u64 return_addr,
+			 int virtual, int operation)
+{
+	struct ia64_sal_retval ret_stuff;
+	u64 call;
+	if (virtual) {
+		call = SN_SAL_NO_FAULT_ZONE_VIRTUAL;
+	} else {
+		call = SN_SAL_NO_FAULT_ZONE_PHYSICAL;
+	}
+	SAL_CALL(ret_stuff, call, start_addr, end_addr, return_addr, (u64)1,
+		 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Change or query the coherence domain for this partition. Each cpu-based
+ * nasid is represented by a bit in an array of 64-bit words:
+ *      0 = not in this partition's coherency domain
+ *      1 = in this partition's coherency domain
+ *
+ * It is not possible for the local system's nasids to be removed from
+ * the coherency domain.  Purpose of the domain arguments:
+ *      new_domain = set the coherence domain to the given nasids
+ *      old_domain = return the current coherence domain
+ *
+ * Returns 0 on success, or a negative value if an error occurred.
+ */
+static inline int
+sn_change_coherence(u64 *new_domain, u64 *old_domain)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_COHERENCE, new_domain, old_domain, 0, 0,
+		 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Change memory access protections for a physical address range.
+ * nasid_array is not used on Altix, but may be in future architectures.
+ * Available memory protection access classes are defined after the function.
+ */
+static inline int
+sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array)
+{
+	struct ia64_sal_retval ret_stuff;
+	int cnodeid;
+	unsigned long irq_flags;
+
+	cnodeid = nasid_to_cnodeid(get_node_number(paddr));
+	// spin_lock(&NODEPDA(cnodeid)->bist_lock);
+	local_irq_save(irq_flags);
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_MEMPROTECT, paddr, len, nasid_array,
+		 perms, 0, 0, 0);
+	local_irq_restore(irq_flags);
+	// spin_unlock(&NODEPDA(cnodeid)->bist_lock);
+	return ret_stuff.status;
+}
+#define SN_MEMPROT_ACCESS_CLASS_0		0x14a080
+#define SN_MEMPROT_ACCESS_CLASS_1		0x2520c2
+#define SN_MEMPROT_ACCESS_CLASS_2		0x14a1ca
+#define SN_MEMPROT_ACCESS_CLASS_3		0x14a290
+#define SN_MEMPROT_ACCESS_CLASS_6		0x084080
+#define SN_MEMPROT_ACCESS_CLASS_7		0x021080
+
+/*
+ * Turns off system power.
+ */
+static inline void
+ia64_sn_power_down(void)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0);
+	while(1);
+	/* never returns */
+}
+
+/**
+ * ia64_sn_fru_capture - tell the system controller to capture hw state
+ *
+ * This routine will call the SAL which will tell the system controller(s)
+ * to capture hw mmr information from each SHub in the system.
+ */
+static inline u64
+ia64_sn_fru_capture(void)
+{
+        struct ia64_sal_retval isrv;
+        SAL_CALL(isrv, SN_SAL_SYSCTL_FRU_CAPTURE, 0, 0, 0, 0, 0, 0, 0);
+        if (isrv.status)
+                return 0;
+        return isrv.v0;
+}
+
+/*
+ * Performs an operation on a PCI bus or slot -- power up, power down
+ * or reset.
+ */
+static inline u64
+ia64_sn_sysctl_iobrick_pci_op(nasid_t n, u64 connection_type, 
+			      u64 bus, char slot, 
+			      u64 action)
+{
+	struct ia64_sal_retval rv = {0, 0, 0, 0};
+
+	SAL_CALL_NOLOCK(rv, SN_SAL_SYSCTL_IOBRICK_PCI_OP, connection_type, n, action,
+		 bus, (u64) slot, 0, 0);
+	if (rv.status)
+	    	return rv.v0;
+	return 0;
+}
+
+
+/*
+ * Open a subchannel for sending arbitrary data to the system
+ * controller network via the system controller device associated with
+ * 'nasid'.  Return the subchannel number or a negative error code.
+ */
+static inline int
+ia64_sn_irtr_open(nasid_t nasid)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid,
+			   0, 0, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Close system controller subchannel 'subch' previously opened on 'nasid'.
+ */
+static inline int
+ia64_sn_irtr_close(nasid_t nasid, int subch)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE,
+			   (u64) nasid, (u64) subch, 0, 0, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Read data from system controller associated with 'nasid' on
+ * subchannel 'subch'.  The buffer to be filled is pointed to by
+ * 'buf', and its capacity is in the integer pointed to by 'len'.  The
+ * referent of 'len' is set to the number of bytes read by the SAL
+ * call.  The return value is either SALRET_OK (for bytes read) or
+ * SALRET_ERROR (for error or "no data available").
+ */
+static inline int
+ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV,
+			   (u64) nasid, (u64) subch, (u64) buf, (u64) len,
+			   0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Write data to the system controller network via the system
+ * controller associated with 'nasid' on suchannel 'subch'.  The
+ * buffer to be written out is pointed to by 'buf', and 'len' is the
+ * number of bytes to be written.  The return value is either the
+ * number of bytes written (which could be zero) or a negative error
+ * code.
+ */
+static inline int
+ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND,
+			   (u64) nasid, (u64) subch, (u64) buf, (u64) len,
+			   0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Check whether any interrupts are pending for the system controller
+ * associated with 'nasid' and its subchannel 'subch'.  The return
+ * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or
+ * SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr(nasid_t nasid, int subch)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS,
+			   (u64) nasid, (u64) subch, 0, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Enable the interrupt indicated by the intr parameter (either
+ * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON,
+			   (u64) nasid, (u64) subch, intr, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Disable the interrupt indicated by the intr parameter (either
+ * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF,
+			   (u64) nasid, (u64) subch, intr, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/**
+ * ia64_sn_get_fit_compt - read a FIT entry from the PROM header
+ * @nasid: NASID of node to read
+ * @index: FIT entry index to be retrieved (0..n)
+ * @fitentry: 16 byte buffer where FIT entry will be stored.
+ * @banbuf: optional buffer for retrieving banner
+ * @banlen: length of banner buffer
+ *
+ * Access to the physical PROM chips needs to be serialized since reads and
+ * writes can't occur at the same time, so we need to call into the SAL when
+ * we want to look at the FIT entries on the chips.
+ *
+ * Returns:
+ *	%SALRET_OK if ok
+ *	%SALRET_INVALID_ARG if index too big
+ *	%SALRET_NOT_IMPLEMENTED if running on older PROM
+ *	??? if nasid invalid OR banner buffer not large enough
+ */
+static inline int
+ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf,
+		      u64 banlen)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry,
+			banbuf, banlen, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Initialize the SAL components of the system controller
+ * communication driver; specifically pass in a sizable buffer that
+ * can be used for allocation of subchannel queues as new subchannels
+ * are opened.  "buf" points to the buffer, and "len" specifies its
+ * length.
+ */
+static inline int
+ia64_sn_irtr_init(nasid_t nasid, void *buf, int len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT,
+			   (u64) nasid, (u64) buf, (u64) len, 0, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Returns the nasid, subnode & slice corresponding to a SAPIC ID
+ *
+ *  In:
+ *	arg0 - SN_SAL_GET_SAPIC_INFO
+ *	arg1 - sapicid (lid >> 16) 
+ *  Out:
+ *	v0 - nasid
+ *	v1 - subnode
+ *	v2 - slice
+ */
+static inline u64
+ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0);
+
+/***** BEGIN HACK - temp til old proms no longer supported ********/
+	if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
+		if (nasid) *nasid = sapicid & 0xfff;
+		if (subnode) *subnode = (sapicid >> 13) & 1;
+		if (slice) *slice = (sapicid >> 12) & 3;
+		return 0;
+	}
+/***** END HACK *******/
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	if (nasid) *nasid = (int) ret_stuff.v0;
+	if (subnode) *subnode = (int) ret_stuff.v1;
+	if (slice) *slice = (int) ret_stuff.v2;
+	return 0;
+}
+ 
+/*
+ * Returns information about the HUB/SHUB.
+ *  In:
+ *	arg0 - SN_SAL_GET_SN_INFO
+ * 	arg1 - 0 (other values reserved for future use)
+ *  Out:
+ *	v0 
+ *		[7:0]   - shub type (0=shub1, 1=shub2)
+ *		[15:8]  - Log2 max number of nodes in entire system (includes
+ *			  C-bricks, I-bricks, etc)
+ *		[23:16] - Log2 of nodes per sharing domain			 
+ * 		[31:24] - partition ID
+ * 		[39:32] - coherency_id
+ * 		[47:40] - regionsize
+ *	v1 
+ *		[15:0]  - nasid mask (ex., 0x7ff for 11 bit nasid)
+ *	 	[23:15] - bit position of low nasid bit
+ */
+static inline u64
+ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift, 
+		u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0);
+
+/***** BEGIN HACK - temp til old proms no longer supported ********/
+	if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
+		int nasid = get_sapicid() & 0xfff;;
+#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL                                               
+#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48                                                               
+		if (shubtype) *shubtype = 0;
+		if (nasid_bitmask) *nasid_bitmask = 0x7ff;
+		if (nasid_shift) *nasid_shift = 38;
+		if (systemsize) *systemsize = 11;
+		if (sharing_domain_size) *sharing_domain_size = 9;
+		if (partid) *partid = ia64_sn_sysctl_partition_get(nasid);
+		if (coher) *coher = nasid >> 9;
+		if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >>
+			SH_SHUB_ID_NODES_PER_BIT_SHFT;
+		return 0;
+	}
+/***** END HACK *******/
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	if (shubtype) *shubtype = ret_stuff.v0 & 0xff;
+	if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff;
+	if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff;
+	if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff;
+	if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff;
+	if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff;
+	if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff);
+	if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff;
+	return 0;
+}
+ 
+/*
+ * This is the access point to the Altix PROM hardware performance
+ * and status monitoring interface. For info on using this, see
+ * include/asm-ia64/sn/sn2/sn_hwperf.h
+ */
+static inline int
+ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2,
+                  u64 a3, u64 a4, int *v0)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid,
+		opcode, a0, a1, a2, a3, a4);
+	if (v0)
+		*v0 = (int) rv.v0;
+	return (int) rv.status;
+}
+
+#endif /* _ASM_IA64_SN_SN_SAL_H */
diff --git a/include/asm-ia64/sn/sndrv.h b/include/asm-ia64/sn/sndrv.h
new file mode 100644
index 000000000000..aa00d42cde32
--- /dev/null
+++ b/include/asm-ia64/sn/sndrv.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2002-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SNDRV_H
+#define _ASM_IA64_SN_SNDRV_H
+
+/* ioctl commands */
+#define SNDRV_GET_ROUTERINFO		1
+#define SNDRV_GET_INFOSIZE		2
+#define SNDRV_GET_HUBINFO		3
+#define SNDRV_GET_FLASHLOGSIZE		4
+#define SNDRV_SET_FLASHSYNC		5
+#define SNDRV_GET_FLASHLOGDATA		6
+#define SNDRV_GET_FLASHLOGALL		7
+
+#define SNDRV_SET_HISTOGRAM_TYPE	14
+
+#define SNDRV_ELSC_COMMAND		19
+#define	SNDRV_CLEAR_LOG			20
+#define	SNDRV_INIT_LOG			21
+#define	SNDRV_GET_PIMM_PSC		22
+#define SNDRV_SET_PARTITION		23
+#define SNDRV_GET_PARTITION		24
+
+/* see synergy_perf_ioctl() */
+#define SNDRV_GET_SYNERGY_VERSION	30
+#define SNDRV_GET_SYNERGY_STATUS	31
+#define SNDRV_GET_SYNERGYINFO		32
+#define SNDRV_SYNERGY_APPEND		33
+#define SNDRV_SYNERGY_ENABLE		34
+#define SNDRV_SYNERGY_FREQ		35
+
+/* Devices */
+#define SNDRV_UKNOWN_DEVICE		-1
+#define SNDRV_ROUTER_DEVICE		1
+#define SNDRV_HUB_DEVICE		2
+#define SNDRV_ELSC_NVRAM_DEVICE		3
+#define SNDRV_ELSC_CONTROLLER_DEVICE	4
+#define SNDRV_SYSCTL_SUBCH		5
+#define SNDRV_SYNERGY_DEVICE		6
+
+#endif /* _ASM_IA64_SN_SNDRV_H */
diff --git a/include/asm-ia64/sn/types.h b/include/asm-ia64/sn/types.h
new file mode 100644
index 000000000000..586ed47cae9c
--- /dev/null
+++ b/include/asm-ia64/sn/types.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999,2001-2003 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_IA64_SN_TYPES_H
+#define _ASM_IA64_SN_TYPES_H
+
+#include <linux/types.h>
+
+typedef unsigned long 	cpuid_t;
+typedef signed short	nasid_t;	/* node id in numa-as-id space */
+typedef signed char	partid_t;	/* partition ID type */
+typedef unsigned int    moduleid_t;     /* user-visible module number type */
+typedef unsigned int    cmoduleid_t;    /* kernel compact module id type */
+typedef signed char     slabid_t;
+typedef u64 nic_t;
+typedef unsigned long iopaddr_t;
+typedef unsigned long paddr_t;
+typedef short cnodeid_t;
+
+#endif /* _ASM_IA64_SN_TYPES_H */
diff --git a/include/asm-ia64/socket.h b/include/asm-ia64/socket.h
new file mode 100644
index 000000000000..21a9f10d6baa
--- /dev/null
+++ b/include/asm-ia64/socket.h
@@ -0,0 +1,59 @@
+#ifndef _ASM_IA64_SOCKET_H
+#define _ASM_IA64_SOCKET_H
+
+/*
+ * Socket related defines.
+ *
+ * Based on <asm-i386/socket.h>.
+ *
+ * Modified 1998-2000
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE		25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC             31
+
+#endif /* _ASM_IA64_SOCKET_H */
diff --git a/include/asm-ia64/sockios.h b/include/asm-ia64/sockios.h
new file mode 100644
index 000000000000..cf94857c8a54
--- /dev/null
+++ b/include/asm-ia64/sockios.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_IA64_SOCKIOS_H
+#define _ASM_IA64_SOCKIOS_H
+
+/*
+ * Socket-level I/O control calls.
+ *
+ * Based on <asm-i386/sockios.h>.
+ *
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif /* _ASM_IA64_SOCKIOS_H */
diff --git a/include/asm-ia64/spinlock.h b/include/asm-ia64/spinlock.h
new file mode 100644
index 000000000000..909936f25512
--- /dev/null
+++ b/include/asm-ia64/spinlock.h
@@ -0,0 +1,208 @@
+#ifndef _ASM_IA64_SPINLOCK_H
+#define _ASM_IA64_SPINLOCK_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ *
+ * This file is used for SMP configurations only.
+ */
+
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+
+#include <asm/atomic.h>
+#include <asm/bitops.h>
+#include <asm/intrinsics.h>
+#include <asm/system.h>
+
+typedef struct {
+	volatile unsigned int lock;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} spinlock_t;
+
+#define SPIN_LOCK_UNLOCKED			(spinlock_t) { 0 }
+#define spin_lock_init(x)			((x)->lock = 0)
+
+#ifdef ASM_SUPPORTED
+/*
+ * Try to get the lock.  If we fail to get the lock, make a non-standard call to
+ * ia64_spinlock_contention().  We do not use a normal call because that would force all
+ * callers of spin_lock() to be non-leaf routines.  Instead, ia64_spinlock_contention() is
+ * carefully coded to touch only those registers that spin_lock() marks "clobbered".
+ */
+
+#define IA64_SPINLOCK_CLOBBERS "ar.ccv", "ar.pfs", "p14", "p15", "r27", "r28", "r29", "r30", "b6", "memory"
+
+static inline void
+_raw_spin_lock_flags (spinlock_t *lock, unsigned long flags)
+{
+	register volatile unsigned int *ptr asm ("r31") = &lock->lock;
+
+#if __GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
+# ifdef CONFIG_ITANIUM
+	/* don't use brl on Itanium... */
+	asm volatile ("{\n\t"
+		      "  mov ar.ccv = r0\n\t"
+		      "  mov r28 = ip\n\t"
+		      "  mov r30 = 1;;\n\t"
+		      "}\n\t"
+		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv\n\t"
+		      "movl r29 = ia64_spinlock_contention_pre3_4;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "mov b6 = r29;;\n\t"
+		      "mov r27=%2\n\t"
+		      "(p14) br.cond.spnt.many b6"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# else
+	asm volatile ("{\n\t"
+		      "  mov ar.ccv = r0\n\t"
+		      "  mov r28 = ip\n\t"
+		      "  mov r30 = 1;;\n\t"
+		      "}\n\t"
+		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "mov r27=%2\n\t"
+		      "(p14) brl.cond.spnt.many ia64_spinlock_contention_pre3_4;;"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# endif /* CONFIG_MCKINLEY */
+#else
+# ifdef CONFIG_ITANIUM
+	/* don't use brl on Itanium... */
+	/* mis-declare, so we get the entry-point, not it's function descriptor: */
+	asm volatile ("mov r30 = 1\n\t"
+		      "mov r27=%2\n\t"
+		      "mov ar.ccv = r0;;\n\t"
+		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv\n\t"
+		      "movl r29 = ia64_spinlock_contention;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "mov b6 = r29;;\n\t"
+		      "(p14) br.call.spnt.many b6 = b6"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# else
+	asm volatile ("mov r30 = 1\n\t"
+		      "mov r27=%2\n\t"
+		      "mov ar.ccv = r0;;\n\t"
+		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "(p14) brl.call.spnt.many b6=ia64_spinlock_contention;;"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# endif /* CONFIG_MCKINLEY */
+#endif
+}
+#define _raw_spin_lock(lock) _raw_spin_lock_flags(lock, 0)
+#else /* !ASM_SUPPORTED */
+#define _raw_spin_lock_flags(lock, flags) _raw_spin_lock(lock)
+# define _raw_spin_lock(x)								\
+do {											\
+	__u32 *ia64_spinlock_ptr = (__u32 *) (x);					\
+	__u64 ia64_spinlock_val;							\
+	ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);			\
+	if (unlikely(ia64_spinlock_val)) {						\
+		do {									\
+			while (*ia64_spinlock_ptr)					\
+				ia64_barrier();						\
+			ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);	\
+		} while (ia64_spinlock_val);						\
+	}										\
+} while (0)
+#endif /* !ASM_SUPPORTED */
+
+#define spin_is_locked(x)	((x)->lock != 0)
+#define _raw_spin_unlock(x)	do { barrier(); ((spinlock_t *) x)->lock = 0; } while (0)
+#define _raw_spin_trylock(x)	(cmpxchg_acq(&(x)->lock, 0, 1) == 0)
+#define spin_unlock_wait(x)	do { barrier(); } while ((x)->lock)
+
+typedef struct {
+	volatile unsigned int read_counter	: 31;
+	volatile unsigned int write_lock	:  1;
+#ifdef CONFIG_PREEMPT
+	unsigned int break_lock;
+#endif
+} rwlock_t;
+#define RW_LOCK_UNLOCKED (rwlock_t) { 0, 0 }
+
+#define rwlock_init(x)		do { *(x) = RW_LOCK_UNLOCKED; } while(0)
+#define read_can_lock(rw)	(*(volatile int *)(rw) >= 0)
+#define write_can_lock(rw)	(*(volatile int *)(rw) == 0)
+
+#define _raw_read_lock(rw)								\
+do {											\
+	rwlock_t *__read_lock_ptr = (rw);						\
+											\
+	while (unlikely(ia64_fetchadd(1, (int *) __read_lock_ptr, acq) < 0)) {		\
+		ia64_fetchadd(-1, (int *) __read_lock_ptr, rel);			\
+		while (*(volatile int *)__read_lock_ptr < 0)				\
+			cpu_relax();							\
+	}										\
+} while (0)
+
+#define _raw_read_unlock(rw)					\
+do {								\
+	rwlock_t *__read_lock_ptr = (rw);			\
+	ia64_fetchadd(-1, (int *) __read_lock_ptr, rel);	\
+} while (0)
+
+#ifdef ASM_SUPPORTED
+#define _raw_write_lock(rw)							\
+do {										\
+ 	__asm__ __volatile__ (							\
+		"mov ar.ccv = r0\n"						\
+		"dep r29 = -1, r0, 31, 1;;\n"					\
+		"1:\n"								\
+		"ld4 r2 = [%0];;\n"						\
+		"cmp4.eq p0,p7 = r0,r2\n"					\
+		"(p7) br.cond.spnt.few 1b \n"					\
+		"cmpxchg4.acq r2 = [%0], r29, ar.ccv;;\n"			\
+		"cmp4.eq p0,p7 = r0, r2\n"					\
+		"(p7) br.cond.spnt.few 1b;;\n"					\
+		:: "r"(rw) : "ar.ccv", "p7", "r2", "r29", "memory");		\
+} while(0)
+
+#define _raw_write_trylock(rw)							\
+({										\
+	register long result;							\
+										\
+	__asm__ __volatile__ (							\
+		"mov ar.ccv = r0\n"						\
+		"dep r29 = -1, r0, 31, 1;;\n"					\
+		"cmpxchg4.acq %0 = [%1], r29, ar.ccv\n"				\
+		: "=r"(result) : "r"(rw) : "ar.ccv", "r29", "memory");		\
+	(result == 0);								\
+})
+
+#else /* !ASM_SUPPORTED */
+
+#define _raw_write_lock(l)								\
+({											\
+	__u64 ia64_val, ia64_set_val = ia64_dep_mi(-1, 0, 31, 1);			\
+	__u32 *ia64_write_lock_ptr = (__u32 *) (l);					\
+	do {										\
+		while (*ia64_write_lock_ptr)						\
+			ia64_barrier();							\
+		ia64_val = ia64_cmpxchg4_acq(ia64_write_lock_ptr, ia64_set_val, 0);	\
+	} while (ia64_val);								\
+})
+
+#define _raw_write_trylock(rw)						\
+({									\
+	__u64 ia64_val;							\
+	__u64 ia64_set_val = ia64_dep_mi(-1, 0, 31,1);			\
+	ia64_val = ia64_cmpxchg4_acq((__u32 *)(rw), ia64_set_val, 0);	\
+	(ia64_val == 0);						\
+})
+
+#endif /* !ASM_SUPPORTED */
+
+#define _raw_read_trylock(lock) generic_raw_read_trylock(lock)
+
+#define _raw_write_unlock(x)								\
+({											\
+	smp_mb__before_clear_bit();	/* need barrier before releasing lock... */	\
+	clear_bit(31, (x));								\
+})
+
+#endif /*  _ASM_IA64_SPINLOCK_H */
diff --git a/include/asm-ia64/stat.h b/include/asm-ia64/stat.h
new file mode 100644
index 000000000000..367bb90cdffa
--- /dev/null
+++ b/include/asm-ia64/stat.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_STAT_H
+#define _ASM_IA64_STAT_H
+
+/*
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+struct stat {
+	unsigned long	st_dev;
+	unsigned long	st_ino;
+	unsigned long	st_nlink;
+	unsigned int	st_mode;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	__pad0;
+	unsigned long	st_rdev;
+	unsigned long	st_size;
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+	unsigned long	st_blksize;
+	long		st_blocks;
+	unsigned long	__unused[3];
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct ia64_oldstat {
+	unsigned int	st_dev;
+	unsigned int	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	st_rdev;
+	unsigned int	__pad1;
+	unsigned long	st_size;
+	unsigned long	st_atime;
+	unsigned long	st_mtime;
+	unsigned long	st_ctime;
+	unsigned int	st_blksize;
+	int		st_blocks;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+#endif /* _ASM_IA64_STAT_H */
diff --git a/include/asm-ia64/statfs.h b/include/asm-ia64/statfs.h
new file mode 100644
index 000000000000..811097974f31
--- /dev/null
+++ b/include/asm-ia64/statfs.h
@@ -0,0 +1,62 @@
+#ifndef _ASM_IA64_STATFS_H
+#define _ASM_IA64_STATFS_H
+
+/*
+ * Based on <asm-i386/statfs.h>.
+ *
+ * Modified 1998, 1999, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#ifndef __KERNEL_STRICT_NAMES
+# include <linux/types.h>
+typedef __kernel_fsid_t	fsid_t;
+#endif
+
+/*
+ * This is ugly --- we're already 64-bit, so just duplicate the definitions
+ */
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+} __attribute__((packed));
+
+#endif /* _ASM_IA64_STATFS_H */
diff --git a/include/asm-ia64/string.h b/include/asm-ia64/string.h
new file mode 100644
index 000000000000..43502d3b57e5
--- /dev/null
+++ b/include/asm-ia64/string.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_STRING_H
+#define _ASM_IA64_STRING_H
+
+/*
+ * Here is where we want to put optimized versions of the string
+ * routines.
+ *
+ * Copyright (C) 1998-2000, 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>	/* remove this once we remove the A-step workaround... */
+
+#define __HAVE_ARCH_STRLEN	1 /* see arch/ia64/lib/strlen.S */
+#define __HAVE_ARCH_MEMSET	1 /* see arch/ia64/lib/memset.S */
+#define __HAVE_ARCH_MEMCPY	1 /* see arch/ia64/lib/memcpy.S */
+
+extern __kernel_size_t strlen (const char *);
+extern void *memcpy (void *, const void *, __kernel_size_t);
+extern void *memset (void *, int, __kernel_size_t);
+
+#endif /* _ASM_IA64_STRING_H */
diff --git a/include/asm-ia64/suspend.h b/include/asm-ia64/suspend.h
new file mode 100644
index 000000000000..b05bbb6074e2
--- /dev/null
+++ b/include/asm-ia64/suspend.h
@@ -0,0 +1 @@
+/* dummy (must be non-empty to prevent prejudicial removal...) */
diff --git a/include/asm-ia64/system.h b/include/asm-ia64/system.h
new file mode 100644
index 000000000000..6f516e76d1f0
--- /dev/null
+++ b/include/asm-ia64/system.h
@@ -0,0 +1,295 @@
+#ifndef _ASM_IA64_SYSTEM_H
+#define _ASM_IA64_SYSTEM_H
+
+/*
+ * System defines. Note that this is included both from .c and .S
+ * files, so it does only defines, not any C code.  This is based
+ * on information published in the Processor Abstraction Layer
+ * and the System Abstraction Layer manual.
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+#include <linux/config.h>
+
+#include <asm/kregs.h>
+#include <asm/page.h>
+#include <asm/pal.h>
+#include <asm/percpu.h>
+
+#define GATE_ADDR		__IA64_UL_CONST(0xa000000000000000)
+/*
+ * 0xa000000000000000+2*PERCPU_PAGE_SIZE
+ * - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
+ */
+#define KERNEL_START		 __IA64_UL_CONST(0xa000000100000000)
+#define PERCPU_ADDR		(-PERCPU_PAGE_SIZE)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct pci_vector_struct {
+	__u16 segment;	/* PCI Segment number */
+	__u16 bus;	/* PCI Bus number */
+	__u32 pci_id;	/* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */
+	__u8 pin;	/* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */
+	__u32 irq;	/* IRQ assigned */
+};
+
+extern struct ia64_boot_param {
+	__u64 command_line;		/* physical address of command line arguments */
+	__u64 efi_systab;		/* physical address of EFI system table */
+	__u64 efi_memmap;		/* physical address of EFI memory map */
+	__u64 efi_memmap_size;		/* size of EFI memory map */
+	__u64 efi_memdesc_size;		/* size of an EFI memory map descriptor */
+	__u32 efi_memdesc_version;	/* memory descriptor version */
+	struct {
+		__u16 num_cols;	/* number of columns on console output device */
+		__u16 num_rows;	/* number of rows on console output device */
+		__u16 orig_x;	/* cursor's x position */
+		__u16 orig_y;	/* cursor's y position */
+	} console_info;
+	__u64 fpswa;		/* physical address of the fpswa interface */
+	__u64 initrd_start;
+	__u64 initrd_size;
+} *ia64_boot_param;
+
+/*
+ * Macros to force memory ordering.  In these descriptions, "previous"
+ * and "subsequent" refer to program order; "visible" means that all
+ * architecturally visible effects of a memory access have occurred
+ * (at a minimum, this means the memory has been read or written).
+ *
+ *   wmb():	Guarantees that all preceding stores to memory-
+ *		like regions are visible before any subsequent
+ *		stores and that all following stores will be
+ *		visible only after all previous stores.
+ *   rmb():	Like wmb(), but for reads.
+ *   mb():	wmb()/rmb() combo, i.e., all previous memory
+ *		accesses are visible before all subsequent
+ *		accesses and vice versa.  This is also known as
+ *		a "fence."
+ *
+ * Note: "mb()" and its variants cannot be used as a fence to order
+ * accesses to memory mapped I/O registers.  For that, mf.a needs to
+ * be used.  However, we don't want to always use mf.a because (a)
+ * it's (presumably) much slower than mf and (b) mf.a is supported for
+ * sequential memory pages only.
+ */
+#define mb()	ia64_mf()
+#define rmb()	mb()
+#define wmb()	mb()
+#define read_barrier_depends()	do { } while(0)
+
+#ifdef CONFIG_SMP
+# define smp_mb()	mb()
+# define smp_rmb()	rmb()
+# define smp_wmb()	wmb()
+# define smp_read_barrier_depends()	read_barrier_depends()
+#else
+# define smp_mb()	barrier()
+# define smp_rmb()	barrier()
+# define smp_wmb()	barrier()
+# define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+/*
+ * XXX check on these---I suspect what Linus really wants here is
+ * acquire vs release semantics but we can't discuss this stuff with
+ * Linus just yet.  Grrr...
+ */
+#define set_mb(var, value)	do { (var) = (value); mb(); } while (0)
+#define set_wmb(var, value)	do { (var) = (value); mb(); } while (0)
+
+#define safe_halt()         ia64_pal_halt_light()    /* PAL_HALT_LIGHT */
+
+/*
+ * The group barrier in front of the rsm & ssm are necessary to ensure
+ * that none of the previous instructions in the same group are
+ * affected by the rsm/ssm.
+ */
+/* For spinlocks etc */
+
+/*
+ * - clearing psr.i is implicitly serialized (visible by next insn)
+ * - setting psr.i requires data serialization
+ * - we need a stop-bit before reading PSR because we sometimes
+ *   write a floating-point register right before reading the PSR
+ *   and that writes to PSR.mfl
+ */
+#define __local_irq_save(x)			\
+do {						\
+	ia64_stop();				\
+	(x) = ia64_getreg(_IA64_REG_PSR);	\
+	ia64_stop();				\
+	ia64_rsm(IA64_PSR_I);			\
+} while (0)
+
+#define __local_irq_disable()			\
+do {						\
+	ia64_stop();				\
+	ia64_rsm(IA64_PSR_I);			\
+} while (0)
+
+#define __local_irq_restore(x)	ia64_intrin_local_irq_restore((x) & IA64_PSR_I)
+
+#ifdef CONFIG_IA64_DEBUG_IRQ
+
+  extern unsigned long last_cli_ip;
+
+# define __save_ip()		last_cli_ip = ia64_getreg(_IA64_REG_IP)
+
+# define local_irq_save(x)					\
+do {								\
+	unsigned long psr;					\
+								\
+	__local_irq_save(psr);					\
+	if (psr & IA64_PSR_I)					\
+		__save_ip();					\
+	(x) = psr;						\
+} while (0)
+
+# define local_irq_disable()	do { unsigned long x; local_irq_save(x); } while (0)
+
+# define local_irq_restore(x)					\
+do {								\
+	unsigned long old_psr, psr = (x);			\
+								\
+	local_save_flags(old_psr);				\
+	__local_irq_restore(psr);				\
+	if ((old_psr & IA64_PSR_I) && !(psr & IA64_PSR_I))	\
+		__save_ip();					\
+} while (0)
+
+#else /* !CONFIG_IA64_DEBUG_IRQ */
+# define local_irq_save(x)	__local_irq_save(x)
+# define local_irq_disable()	__local_irq_disable()
+# define local_irq_restore(x)	__local_irq_restore(x)
+#endif /* !CONFIG_IA64_DEBUG_IRQ */
+
+#define local_irq_enable()	({ ia64_stop(); ia64_ssm(IA64_PSR_I); ia64_srlz_d(); })
+#define local_save_flags(flags)	({ ia64_stop(); (flags) = ia64_getreg(_IA64_REG_PSR); })
+
+#define irqs_disabled()				\
+({						\
+	unsigned long __ia64_id_flags;		\
+	local_save_flags(__ia64_id_flags);	\
+	(__ia64_id_flags & IA64_PSR_I) == 0;	\
+})
+
+#ifdef __KERNEL__
+
+#define prepare_to_switch()    do { } while(0)
+
+#ifdef CONFIG_IA32_SUPPORT
+# define IS_IA32_PROCESS(regs)	(ia64_psr(regs)->is != 0)
+#else
+# define IS_IA32_PROCESS(regs)		0
+struct task_struct;
+static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){}
+static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){}
+#endif
+
+/*
+ * Context switch from one thread to another.  If the two threads have
+ * different address spaces, schedule() has already taken care of
+ * switching to the new address space by calling switch_mm().
+ *
+ * Disabling access to the fph partition and the debug-register
+ * context switch MUST be done before calling ia64_switch_to() since a
+ * newly created thread returns directly to
+ * ia64_ret_from_syscall_clear_r8.
+ */
+extern struct task_struct *ia64_switch_to (void *next_task);
+
+struct task_struct;
+
+extern void ia64_save_extra (struct task_struct *task);
+extern void ia64_load_extra (struct task_struct *task);
+
+#ifdef CONFIG_PERFMON
+  DECLARE_PER_CPU(unsigned long, pfm_syst_info);
+# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
+#else
+# define PERFMON_IS_SYSWIDE() (0)
+#endif
+
+#define IA64_HAS_EXTRA_STATE(t)							\
+	((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID)	\
+	 || IS_IA32_PROCESS(ia64_task_regs(t)) || PERFMON_IS_SYSWIDE())
+
+#define __switch_to(prev,next,last) do {							 \
+	if (IA64_HAS_EXTRA_STATE(prev))								 \
+		ia64_save_extra(prev);								 \
+	if (IA64_HAS_EXTRA_STATE(next))								 \
+		ia64_load_extra(next);								 \
+	ia64_psr(ia64_task_regs(next))->dfh = !ia64_is_local_fpu_owner(next);			 \
+	(last) = ia64_switch_to((next));							 \
+} while (0)
+
+#ifdef CONFIG_SMP
+/*
+ * In the SMP case, we save the fph state when context-switching away from a thread that
+ * modified fph.  This way, when the thread gets scheduled on another CPU, the CPU can
+ * pick up the state from task->thread.fph, avoiding the complication of having to fetch
+ * the latest fph state from another CPU.  In other words: eager save, lazy restore.
+ */
+# define switch_to(prev,next,last) do {						\
+	if (ia64_psr(ia64_task_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) {				\
+		ia64_psr(ia64_task_regs(prev))->mfh = 0;			\
+		(prev)->thread.flags |= IA64_THREAD_FPH_VALID;			\
+		__ia64_save_fpu((prev)->thread.fph);				\
+	}									\
+	__switch_to(prev, next, last);						\
+} while (0)
+#else
+# define switch_to(prev,next,last)	__switch_to(prev, next, last)
+#endif
+
+/*
+ * On IA-64, we don't want to hold the runqueue's lock during the low-level context-switch,
+ * because that could cause a deadlock.  Here is an example by Erich Focht:
+ *
+ * Example:
+ * CPU#0:
+ * schedule()
+ *    -> spin_lock_irq(&rq->lock)
+ *    -> context_switch()
+ *       -> wrap_mmu_context()
+ *          -> read_lock(&tasklist_lock)
+ *
+ * CPU#1:
+ * sys_wait4() or release_task() or forget_original_parent()
+ *    -> write_lock(&tasklist_lock)
+ *    -> do_notify_parent()
+ *       -> wake_up_parent()
+ *          -> try_to_wake_up()
+ *             -> spin_lock_irq(&parent_rq->lock)
+ *
+ * If the parent's rq happens to be on CPU#0, we'll wait for the rq->lock
+ * of that CPU which will not be released, because there we wait for the
+ * tasklist_lock to become available.
+ */
+#define prepare_arch_switch(rq, next)		\
+do {						\
+	spin_lock(&(next)->switch_lock);	\
+	spin_unlock(&(rq)->lock);		\
+} while (0)
+#define finish_arch_switch(rq, prev)	spin_unlock_irq(&(prev)->switch_lock)
+#define task_running(rq, p) 		((rq)->curr == (p) || spin_is_locked(&(p)->switch_lock))
+
+#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
+
+void cpu_idle_wait(void);
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_SYSTEM_H */
diff --git a/include/asm-ia64/termbits.h b/include/asm-ia64/termbits.h
new file mode 100644
index 000000000000..b9e843f7dc42
--- /dev/null
+++ b/include/asm-ia64/termbits.h
@@ -0,0 +1,182 @@
+#ifndef _ASM_IA64_TERMBITS_H
+#define _ASM_IA64_TERMBITS_H
+
+/*
+ * Based on <asm-i386/termbits.h>.
+ *
+ * Modified 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * 99/01/28	Added new baudrates
+ */
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* _ASM_IA64_TERMBITS_H */
diff --git a/include/asm-ia64/termios.h b/include/asm-ia64/termios.h
new file mode 100644
index 000000000000..42c95693240c
--- /dev/null
+++ b/include/asm-ia64/termios.h
@@ -0,0 +1,113 @@
+#ifndef _ASM_IA64_TERMIOS_H
+#define _ASM_IA64_TERMIOS_H
+
+/*
+ * Modified 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * 99/01/28	Added N_IRDA and N_SMSBLOCK
+ */
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS msgs */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+# ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) {	\
+	unsigned short __tmp;				\
+	get_user(__tmp,&(termio)->x);			\
+	*(unsigned short *) &(termios)->x = __tmp;	\
+}
+
+#define user_termio_to_kernel_termios(termios, termio)		\
+({								\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag);		\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);		\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);		\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);		\
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC);	\
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios)		\
+({								\
+	put_user((termios)->c_iflag, &(termio)->c_iflag);	\
+	put_user((termios)->c_oflag, &(termio)->c_oflag);	\
+	put_user((termios)->c_cflag, &(termio)->c_cflag);	\
+	put_user((termios)->c_lflag, &(termio)->c_lflag);	\
+	put_user((termios)->c_line,  &(termio)->c_line);	\
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC);	\
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+# endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_TERMIOS_H */
diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h
new file mode 100644
index 000000000000..8d5b7e77028c
--- /dev/null
+++ b/include/asm-ia64/thread_info.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef _ASM_IA64_THREAD_INFO_H
+#define _ASM_IA64_THREAD_INFO_H
+
+#include <asm/offsets.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+
+#define PREEMPT_ACTIVE_BIT 30
+#define PREEMPT_ACTIVE	(1 << PREEMPT_ACTIVE_BIT)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * On IA-64, we want to keep the task structure and kernel stack together, so they can be
+ * mapped by a single TLB entry and so they can be addressed by the "current" pointer
+ * without having to do pointer masking.
+ */
+struct thread_info {
+	struct task_struct *task;	/* XXX not really needed, except for dup_task_struct() */
+	struct exec_domain *exec_domain;/* execution domain */
+	__u32 flags;			/* thread_info flags (see TIF_*) */
+	__u32 cpu;			/* current CPU */
+	mm_segment_t addr_limit;	/* user-level address space limit */
+	__s32 preempt_count;		/* 0=premptable, <0=BUG; will also serve as bh-counter */
+	struct restart_block restart_block;
+	struct {
+		int signo;
+		int code;
+		void __user *addr;
+		unsigned long start_time;
+		pid_t pid;
+	} sigdelayed;			/* Saved information for TIF_SIGDELAYED */
+};
+
+#define THREAD_SIZE			KERNEL_STACK_SIZE
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.addr_limit	= KERNEL_DS,		\
+	.preempt_count	= 0,			\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+/* how to get the thread information struct from C */
+#define current_thread_info()	((struct thread_info *) ((char *) current + IA64_TASK_SIZE))
+#define alloc_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
+#define free_thread_info(ti)	/* nothing */
+
+#define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
+#define alloc_task_struct()	((task_t *)__get_free_pages(GFP_KERNEL, KERNEL_STACK_SIZE_ORDER))
+#define free_task_struct(tsk)	free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER)
+
+#endif /* !__ASSEMBLY */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in least-significant 16 bits, other flags
+ *   in top 16 bits
+ */
+#define TIF_NOTIFY_RESUME	0	/* resumption notification requested */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_SYSCALL_TRACE	3	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	4	/* syscall auditing active */
+#define TIF_SIGDELAYED		5	/* signal delayed from MCA/INIT/NMI/PMI context */
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		17
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_TRACEAUDIT	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_SIGDELAYED	(1 << TIF_SIGDELAYED)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+
+/* "work to do on user-return" bits */
+#define TIF_ALLWORK_MASK	(_TIF_NOTIFY_RESUME|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SIGDELAYED)
+/* like TIF_ALLWORK_BITS but sans TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT */
+#define TIF_WORK_MASK		(TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT))
+
+#endif /* _ASM_IA64_THREAD_INFO_H */
diff --git a/include/asm-ia64/timex.h b/include/asm-ia64/timex.h
new file mode 100644
index 000000000000..414aae060440
--- /dev/null
+++ b/include/asm-ia64/timex.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_IA64_TIMEX_H
+#define _ASM_IA64_TIMEX_H
+
+/*
+ * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * 2001/01/18 davidm	Removed CLOCK_TICK_RATE.  It makes no sense on IA-64.
+ *			Also removed cacheflush_time as it's entirely unused.
+ */
+
+#include <asm/intrinsics.h>
+#include <asm/processor.h>
+
+typedef unsigned long cycles_t;
+
+/*
+ * For performance reasons, we don't want to define CLOCK_TICK_TRATE as
+ * local_cpu_data->itc_rate.  Fortunately, we don't have to, either: according to George
+ * Anzinger, 1/CLOCK_TICK_RATE is taken as the resolution of the timer clock.  The time
+ * calculation assumes that you will use enough of these so that your tick size <= 1/HZ.
+ * If the calculation shows that your CLOCK_TICK_RATE can not supply exactly 1/HZ ticks,
+ * the actual value is calculated and used to update the wall clock each jiffie.  Setting
+ * the CLOCK_TICK_RATE to x*HZ insures that the calculation will find no errors.  Hence we
+ * pick a multiple of HZ which gives us a (totally virtual) CLOCK_TICK_RATE of about
+ * 100MHz.
+ */
+#define CLOCK_TICK_RATE		(HZ * 100000UL)
+
+static inline cycles_t
+get_cycles (void)
+{
+	cycles_t ret;
+
+	ret = ia64_getreg(_IA64_REG_AR_ITC);
+	return ret;
+}
+
+#endif /* _ASM_IA64_TIMEX_H */
diff --git a/include/asm-ia64/tlb.h b/include/asm-ia64/tlb.h
new file mode 100644
index 000000000000..3a9a6d1be75c
--- /dev/null
+++ b/include/asm-ia64/tlb.h
@@ -0,0 +1,245 @@
+#ifndef _ASM_IA64_TLB_H
+#define _ASM_IA64_TLB_H
+/*
+ * Based on <asm-generic/tlb.h>.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * Removing a translation from a page table (including TLB-shootdown) is a four-step
+ * procedure:
+ *
+ *	(1) Flush (virtual) caches --- ensures virtual memory is coherent with kernel memory
+ *	    (this is a no-op on ia64).
+ *	(2) Clear the relevant portions of the page-table
+ *	(3) Flush the TLBs --- ensures that stale content is gone from CPU TLBs
+ *	(4) Release the pages that were freed up in step (2).
+ *
+ * Note that the ordering of these steps is crucial to avoid races on MP machines.
+ *
+ * The Linux kernel defines several platform-specific hooks for TLB-shootdown.  When
+ * unmapping a portion of the virtual address space, these hooks are called according to
+ * the following template:
+ *
+ *	tlb <- tlb_gather_mmu(mm, full_mm_flush);	// start unmap for address space MM
+ *	{
+ *	  for each vma that needs a shootdown do {
+ *	    tlb_start_vma(tlb, vma);
+ *	      for each page-table-entry PTE that needs to be removed do {
+ *		tlb_remove_tlb_entry(tlb, pte, address);
+ *		if (pte refers to a normal page) {
+ *		  tlb_remove_page(tlb, page);
+ *		}
+ *	      }
+ *	    tlb_end_vma(tlb, vma);
+ *	  }
+ *	}
+ *	tlb_finish_mmu(tlb, start, end);	// finish unmap for address space MM
+ */
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/swap.h>
+
+#include <asm/pgalloc.h>
+#include <asm/processor.h>
+#include <asm/tlbflush.h>
+#include <asm/machvec.h>
+
+#ifdef CONFIG_SMP
+# define FREE_PTE_NR		2048
+# define tlb_fast_mode(tlb)	((tlb)->nr == ~0U)
+#else
+# define FREE_PTE_NR		0
+# define tlb_fast_mode(tlb)	(1)
+#endif
+
+struct mmu_gather {
+	struct mm_struct	*mm;
+	unsigned int		nr;		/* == ~0U => fast mode */
+	unsigned char		fullmm;		/* non-zero means full mm flush */
+	unsigned char		need_flush;	/* really unmapped some PTEs? */
+	unsigned long		freed;		/* number of pages freed */
+	unsigned long		start_addr;
+	unsigned long		end_addr;
+	struct page 		*pages[FREE_PTE_NR];
+};
+
+/* Users of the generic TLB shootdown code must declare this storage space. */
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+/*
+ * Flush the TLB for address range START to END and, if not in fast mode, release the
+ * freed pages that where gathered up to this point.
+ */
+static inline void
+ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	unsigned int nr;
+
+	if (!tlb->need_flush)
+		return;
+	tlb->need_flush = 0;
+
+	if (tlb->fullmm) {
+		/*
+		 * Tearing down the entire address space.  This happens both as a result
+		 * of exit() and execve().  The latter case necessitates the call to
+		 * flush_tlb_mm() here.
+		 */
+		flush_tlb_mm(tlb->mm);
+	} else if (unlikely (end - start >= 1024*1024*1024*1024UL
+			     || REGION_NUMBER(start) != REGION_NUMBER(end - 1)))
+	{
+		/*
+		 * If we flush more than a tera-byte or across regions, we're probably
+		 * better off just flushing the entire TLB(s).  This should be very rare
+		 * and is not worth optimizing for.
+		 */
+		flush_tlb_all();
+	} else {
+		/*
+		 * XXX fix me: flush_tlb_range() should take an mm pointer instead of a
+		 * vma pointer.
+		 */
+		struct vm_area_struct vma;
+
+		vma.vm_mm = tlb->mm;
+		/* flush the address range from the tlb: */
+		flush_tlb_range(&vma, start, end);
+		/* now flush the virt. page-table area mapping the address range: */
+		flush_tlb_range(&vma, ia64_thash(start), ia64_thash(end));
+	}
+
+	/* lastly, release the freed pages */
+	nr = tlb->nr;
+	if (!tlb_fast_mode(tlb)) {
+		unsigned long i;
+		tlb->nr = 0;
+		tlb->start_addr = ~0UL;
+		for (i = 0; i < nr; ++i)
+			free_page_and_swap_cache(tlb->pages[i]);
+	}
+}
+
+/*
+ * Return a pointer to an initialized struct mmu_gather.
+ */
+static inline struct mmu_gather *
+tlb_gather_mmu (struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *tlb = &__get_cpu_var(mmu_gathers);
+
+	tlb->mm = mm;
+	/*
+	 * Use fast mode if only 1 CPU is online.
+	 *
+	 * It would be tempting to turn on fast-mode for full_mm_flush as well.  But this
+	 * doesn't work because of speculative accesses and software prefetching: the page
+	 * table of "mm" may (and usually is) the currently active page table and even
+	 * though the kernel won't do any user-space accesses during the TLB shoot down, a
+	 * compiler might use speculation or lfetch.fault on what happens to be a valid
+	 * user-space address.  This in turn could trigger a TLB miss fault (or a VHPT
+	 * walk) and re-insert a TLB entry we just removed.  Slow mode avoids such
+	 * problems.  (We could make fast-mode work by switching the current task to a
+	 * different "mm" during the shootdown.) --davidm 08/02/2002
+	 */
+	tlb->nr = (num_online_cpus() == 1) ? ~0U : 0;
+	tlb->fullmm = full_mm_flush;
+	tlb->freed = 0;
+	tlb->start_addr = ~0UL;
+	return tlb;
+}
+
+/*
+ * Called at the end of the shootdown operation to free up any resources that were
+ * collected.  The page table lock is still held at this point.
+ */
+static inline void
+tlb_finish_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	unsigned long freed = tlb->freed;
+	struct mm_struct *mm = tlb->mm;
+	unsigned long rss = get_mm_counter(mm, rss);
+
+	if (rss < freed)
+		freed = rss;
+	add_mm_counter(mm, rss, -freed);
+	/*
+	 * Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and
+	 * tlb->end_addr.
+	 */
+	ia64_tlb_flush_mmu(tlb, start, end);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+}
+
+static inline unsigned int
+tlb_is_full_mm(struct mmu_gather *tlb)
+{
+     return tlb->fullmm;
+}
+
+/*
+ * Logically, this routine frees PAGE.  On MP machines, the actual freeing of the page
+ * must be delayed until after the TLB has been flushed (see comments at the beginning of
+ * this file).
+ */
+static inline void
+tlb_remove_page (struct mmu_gather *tlb, struct page *page)
+{
+	tlb->need_flush = 1;
+
+	if (tlb_fast_mode(tlb)) {
+		free_page_and_swap_cache(page);
+		return;
+	}
+	tlb->pages[tlb->nr++] = page;
+	if (tlb->nr >= FREE_PTE_NR)
+		ia64_tlb_flush_mmu(tlb, tlb->start_addr, tlb->end_addr);
+}
+
+/*
+ * Remove TLB entry for PTE mapped at virtual address ADDRESS.  This is called for any
+ * PTE, not just those pointing to (normal) physical memory.
+ */
+static inline void
+__tlb_remove_tlb_entry (struct mmu_gather *tlb, pte_t *ptep, unsigned long address)
+{
+	if (tlb->start_addr == ~0UL)
+		tlb->start_addr = address;
+	tlb->end_addr = address + PAGE_SIZE;
+}
+
+#define tlb_migrate_finish(mm)	platform_tlb_migrate_finish(mm)
+
+#define tlb_start_vma(tlb, vma)			do { } while (0)
+#define tlb_end_vma(tlb, vma)			do { } while (0)
+
+#define tlb_remove_tlb_entry(tlb, ptep, addr)		\
+do {							\
+	tlb->need_flush = 1;				\
+	__tlb_remove_tlb_entry(tlb, ptep, addr);	\
+} while (0)
+
+#define pte_free_tlb(tlb, ptep)				\
+do {							\
+	tlb->need_flush = 1;				\
+	__pte_free_tlb(tlb, ptep);			\
+} while (0)
+
+#define pmd_free_tlb(tlb, ptep)				\
+do {							\
+	tlb->need_flush = 1;				\
+	__pmd_free_tlb(tlb, ptep);			\
+} while (0)
+
+#define pud_free_tlb(tlb, pudp)				\
+do {							\
+	tlb->need_flush = 1;				\
+	__pud_free_tlb(tlb, pudp);			\
+} while (0)
+
+#endif /* _ASM_IA64_TLB_H */
diff --git a/include/asm-ia64/tlbflush.h b/include/asm-ia64/tlbflush.h
new file mode 100644
index 000000000000..b65c62702724
--- /dev/null
+++ b/include/asm-ia64/tlbflush.h
@@ -0,0 +1,99 @@
+#ifndef _ASM_IA64_TLBFLUSH_H
+#define _ASM_IA64_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/config.h>
+
+#include <linux/mm.h>
+
+#include <asm/intrinsics.h>
+#include <asm/mmu_context.h>
+#include <asm/page.h>
+
+/*
+ * Now for some TLB flushing routines.  This is the kind of stuff that
+ * can be very expensive, so try to avoid them whenever possible.
+ */
+
+/*
+ * Flush everything (kernel mapping may also have changed due to
+ * vmalloc/vfree).
+ */
+extern void local_flush_tlb_all (void);
+
+#ifdef CONFIG_SMP
+  extern void smp_flush_tlb_all (void);
+  extern void smp_flush_tlb_mm (struct mm_struct *mm);
+# define flush_tlb_all()	smp_flush_tlb_all()
+#else
+# define flush_tlb_all()	local_flush_tlb_all()
+#endif
+
+static inline void
+local_finish_flush_tlb_mm (struct mm_struct *mm)
+{
+	if (mm == current->active_mm)
+		activate_context(mm);
+}
+
+/*
+ * Flush a specified user mapping.  This is called, e.g., as a result of fork() and
+ * exit().  fork() ends up here because the copy-on-write mechanism needs to write-protect
+ * the PTEs of the parent task.
+ */
+static inline void
+flush_tlb_mm (struct mm_struct *mm)
+{
+	if (!mm)
+		return;
+
+	mm->context = 0;
+
+	if (atomic_read(&mm->mm_users) == 0)
+		return;		/* happens as a result of exit_mmap() */
+
+#ifdef CONFIG_SMP
+	smp_flush_tlb_mm(mm);
+#else
+	local_finish_flush_tlb_mm(mm);
+#endif
+}
+
+extern void flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long end);
+
+/*
+ * Page-granular tlb flush.
+ */
+static inline void
+flush_tlb_page (struct vm_area_struct *vma, unsigned long addr)
+{
+#ifdef CONFIG_SMP
+	flush_tlb_range(vma, (addr & PAGE_MASK), (addr & PAGE_MASK) + PAGE_SIZE);
+#else
+	if (vma->vm_mm == current->active_mm)
+		ia64_ptcl(addr, (PAGE_SHIFT << 2));
+	else
+		vma->vm_mm->context = 0;
+#endif
+}
+
+/*
+ * Flush the TLB entries mapping the virtually mapped linear page
+ * table corresponding to address range [START-END).
+ */
+static inline void
+flush_tlb_pgtables (struct mm_struct *mm, unsigned long start, unsigned long end)
+{
+	/*
+	 * Deprecated.  The virtual page table is now flushed via the normal gather/flush
+	 * interface (see tlb.h).
+	 */
+}
+
+#define flush_tlb_kernel_range(start, end)	flush_tlb_all()	/* XXX fix me */
+
+#endif /* _ASM_IA64_TLBFLUSH_H */
diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h
new file mode 100644
index 000000000000..21cf351fd05c
--- /dev/null
+++ b/include/asm-ia64/topology.h
@@ -0,0 +1,90 @@
+/*
+ * linux/include/asm-ia64/topology.h
+ *
+ * Copyright (C) 2002, Erich Focht, NEC
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _ASM_IA64_TOPOLOGY_H
+#define _ASM_IA64_TOPOLOGY_H
+
+#include <asm/acpi.h>
+#include <asm/numa.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_NUMA
+/*
+ * Returns the number of the node containing CPU 'cpu'
+ */
+#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
+
+/*
+ * Returns a bitmask of CPUs on Node 'node'.
+ */
+#define node_to_cpumask(node) (node_to_cpu_mask[node])
+
+/*
+ * Returns the number of the node containing Node 'nid'.
+ * Not implemented here. Multi-level hierarchies detected with
+ * the help of node_distance().
+ */
+#define parent_node(nid) (nid)
+
+/*
+ * Returns the number of the first CPU on Node 'node'.
+ */
+#define node_to_first_cpu(node) (__ffs(node_to_cpumask(node)))
+
+void build_cpu_to_node_map(void);
+
+/* sched_domains SD_NODE_INIT for IA64 NUMA machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 80,			\
+	.max_interval		= 320,			\
+	.busy_factor		= 320,			\
+	.imbalance_pct		= 125,			\
+	.cache_hot_time		= (10*1000000),		\
+	.cache_nice_tries	= 1,			\
+	.per_cpu_gain		= 100,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_WAKE_IDLE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+/* sched_domains SD_ALLNODES_INIT for IA64 NUMA machines */
+#define SD_ALLNODES_INIT (struct sched_domain) {	\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 80,			\
+	.max_interval		= 320,			\
+	.busy_factor		= 320,			\
+	.imbalance_pct		= 125,			\
+	.cache_hot_time		= (10*1000000),		\
+	.cache_nice_tries	= 1,			\
+	.per_cpu_gain		= 100,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 100*(63+num_online_cpus())/64,   \
+	.nr_balance_failed	= 0,			\
+}
+
+#endif /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_IA64_TOPOLOGY_H */
diff --git a/include/asm-ia64/types.h b/include/asm-ia64/types.h
new file mode 100644
index 000000000000..a677565aa954
--- /dev/null
+++ b/include/asm-ia64/types.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_IA64_TYPES_H
+#define _ASM_IA64_TYPES_H
+
+/*
+ * This file is never included by application software unless explicitly requested (e.g.,
+ * via linux/types.h) in which case the application is Linux specific so (user-) name
+ * space pollution is not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ *
+ * Based on <asm-alpha/types.h>.
+ *
+ * Modified 1998-2000, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#ifdef __ASSEMBLY__
+# define __IA64_UL(x)		(x)
+# define __IA64_UL_CONST(x)	x
+
+# ifdef __KERNEL__
+#  define BITS_PER_LONG 64
+# endif
+
+#else
+# define __IA64_UL(x)		((unsigned long)(x))
+# define __IA64_UL_CONST(x)	x##UL
+
+typedef unsigned int umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+typedef __signed__ long __s64;
+typedef unsigned long __u64;
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+# ifdef __KERNEL__
+
+typedef __s8 s8;
+typedef __u8 u8;
+
+typedef __s16 s16;
+typedef __u16 u16;
+
+typedef __s32 s32;
+typedef __u32 u32;
+
+typedef __s64 s64;
+typedef __u64 u64;
+
+#define BITS_PER_LONG 64
+
+/* DMA addresses are 64-bits wide, in general.  */
+
+typedef u64 dma_addr_t;
+
+typedef unsigned short kmem_bufctl_t;
+
+# endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_TYPES_H */
diff --git a/include/asm-ia64/uaccess.h b/include/asm-ia64/uaccess.h
new file mode 100644
index 000000000000..8edd9a90949c
--- /dev/null
+++ b/include/asm-ia64/uaccess.h
@@ -0,0 +1,408 @@
+#ifndef _ASM_IA64_UACCESS_H
+#define _ASM_IA64_UACCESS_H
+
+/*
+ * This file defines various macros to transfer memory areas across
+ * the user/kernel boundary.  This needs to be done carefully because
+ * this code is executed in kernel mode and uses user-specified
+ * addresses.  Thus, we need to be careful not to let the user to
+ * trick us into accessing kernel memory that would normally be
+ * inaccessible.  This code is also fairly performance sensitive,
+ * so we want to spend as little time doing safety checks as
+ * possible.
+ *
+ * To make matters a bit more interesting, these macros sometimes also
+ * called from within the kernel itself, in which case the address
+ * validity check must be skipped.  The get_fs() macro tells us what
+ * to do: if get_fs()==USER_DS, checking is performed, if
+ * get_fs()==KERNEL_DS, checking is bypassed.
+ *
+ * Note that even if the memory area specified by the user is in a
+ * valid address range, it is still possible that we'll get a page
+ * fault while accessing it.  This is handled by filling out an
+ * exception handler fixup entry for each instruction that has the
+ * potential to fault.  When such a fault occurs, the page fault
+ * handler checks to see whether the faulting instruction has a fixup
+ * associated and, if so, sets r8 to -EFAULT and clears r9 to 0 and
+ * then resumes execution at the continuation point.
+ *
+ * Based on <asm-alpha/uaccess.h>.
+ *
+ * Copyright (C) 1998, 1999, 2001-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/page-flags.h>
+#include <linux/mm.h>
+
+#include <asm/intrinsics.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+
+/*
+ * For historical reasons, the following macros are grossly misnamed:
+ */
+#define KERNEL_DS	((mm_segment_t) { ~0UL })		/* cf. access_ok() */
+#define USER_DS		((mm_segment_t) { TASK_SIZE-1 })	/* cf. access_ok() */
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_ds()  (KERNEL_DS)
+#define get_fs()  (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
+/*
+ * When accessing user memory, we need to make sure the entire area really is in
+ * user-level space.  In order to do this efficiently, we make sure that the page at
+ * address TASK_SIZE is never valid.  We also need to make sure that the address doesn't
+ * point inside the virtually mapped linear page table.
+ */
+#define __access_ok(addr, size, segment)						\
+({											\
+	__chk_user_ptr(addr);								\
+	(likely((unsigned long) (addr) <= (segment).seg)				\
+	 && ((segment).seg == KERNEL_DS.seg						\
+	     || likely(REGION_OFFSET((unsigned long) (addr)) < RGN_MAP_LIMIT)));	\
+})
+#define access_ok(type, addr, size)	__access_ok((addr), (size), get_fs())
+
+/* this function will go away soon - use access_ok() instead */
+static inline int __deprecated
+verify_area (int type, const void __user *addr, unsigned long size)
+{
+	return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof/typeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x, ptr)	__put_user_check((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)), get_fs())
+#define get_user(x, ptr)	__get_user_check((x), (ptr), sizeof(*(ptr)), get_fs())
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the programmer has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x, ptr)	__put_user_nocheck((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)))
+#define __get_user(x, ptr)	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+extern long __put_user_unaligned_unknown (void);
+
+#define __put_user_unaligned(x, ptr)								\
+({												\
+	long __ret;										\
+	switch (sizeof(*(ptr))) {								\
+		case 1: __ret = __put_user((x), (ptr)); break;					\
+		case 2: __ret = (__put_user((x), (u8 __user *)(ptr)))				\
+			| (__put_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break;		\
+		case 4: __ret = (__put_user((x), (u16 __user *)(ptr)))				\
+			| (__put_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break;		\
+		case 8: __ret = (__put_user((x), (u32 __user *)(ptr)))				\
+			| (__put_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break;		\
+		default: __ret = __put_user_unaligned_unknown();				\
+	}											\
+	__ret;											\
+})
+
+extern long __get_user_unaligned_unknown (void);
+
+#define __get_user_unaligned(x, ptr)								\
+({												\
+	long __ret;										\
+	switch (sizeof(*(ptr))) {								\
+		case 1: __ret = __get_user((x), (ptr)); break;					\
+		case 2: __ret = (__get_user((x), (u8 __user *)(ptr)))				\
+			| (__get_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break;		\
+		case 4: __ret = (__get_user((x), (u16 __user *)(ptr)))				\
+			| (__get_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break;		\
+		case 8: __ret = (__get_user((x), (u32 __user *)(ptr)))				\
+			| (__get_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break;		\
+		default: __ret = __get_user_unaligned_unknown();				\
+	}											\
+	__ret;											\
+})
+
+#ifdef ASM_SUPPORTED
+  struct __large_struct { unsigned long buf[100]; };
+# define __m(x) (*(struct __large_struct __user *)(x))
+
+/* We need to declare the __ex_table section before we can use it in .xdata.  */
+asm (".section \"__ex_table\", \"a\"\n\t.previous");
+
+# define __get_user_size(val, addr, n, err)							\
+do {												\
+	register long __gu_r8 asm ("r8") = 0;							\
+	register long __gu_r9 asm ("r9");							\
+	asm ("\n[1:]\tld"#n" %0=%2%P2\t// %0 and %1 get overwritten by exception handler\n"	\
+	     "\t.xdata4 \"__ex_table\", 1b-., 1f-.+4\n"						\
+	     "[1:]"										\
+	     : "=r"(__gu_r9), "=r"(__gu_r8) : "m"(__m(addr)), "1"(__gu_r8));			\
+	(err) = __gu_r8;									\
+	(val) = __gu_r9;									\
+} while (0)
+
+/*
+ * The "__put_user_size()" macro tells gcc it reads from memory instead of writing it.  This
+ * is because they do not write to any memory gcc knows about, so there are no aliasing
+ * issues.
+ */
+# define __put_user_size(val, addr, n, err)							\
+do {												\
+	register long __pu_r8 asm ("r8") = 0;							\
+	asm volatile ("\n[1:]\tst"#n" %1=%r2%P1\t// %0 gets overwritten by exception handler\n"	\
+		      "\t.xdata4 \"__ex_table\", 1b-., 1f-.\n"					\
+		      "[1:]"									\
+		      : "=r"(__pu_r8) : "m"(__m(addr)), "rO"(val), "0"(__pu_r8));		\
+	(err) = __pu_r8;									\
+} while (0)
+
+#else /* !ASM_SUPPORTED */
+# define RELOC_TYPE	2	/* ip-rel */
+# define __get_user_size(val, addr, n, err)				\
+do {									\
+	__ld_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE);	\
+	(err) = ia64_getreg(_IA64_REG_R8);				\
+	(val) = ia64_getreg(_IA64_REG_R9);				\
+} while (0)
+# define __put_user_size(val, addr, n, err)							\
+do {												\
+	__st_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE, (unsigned long) (val));	\
+	(err) = ia64_getreg(_IA64_REG_R8);							\
+} while (0)
+#endif /* !ASM_SUPPORTED */
+
+extern void __get_user_unknown (void);
+
+/*
+ * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
+ * could clobber r8 and r9 (among others).  Thus, be careful not to evaluate it while
+ * using r8/r9.
+ */
+#define __do_get_user(check, x, ptr, size, segment)					\
+({											\
+	const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);				\
+	__typeof__ (size) __gu_size = (size);						\
+	long __gu_err = -EFAULT, __gu_val = 0;						\
+											\
+	if (!check || __access_ok(__gu_ptr, size, segment))				\
+		switch (__gu_size) {							\
+		      case 1: __get_user_size(__gu_val, __gu_ptr, 1, __gu_err); break;	\
+		      case 2: __get_user_size(__gu_val, __gu_ptr, 2, __gu_err); break;	\
+		      case 4: __get_user_size(__gu_val, __gu_ptr, 4, __gu_err); break;	\
+		      case 8: __get_user_size(__gu_val, __gu_ptr, 8, __gu_err); break;	\
+		      default: __get_user_unknown(); break;				\
+		}									\
+	(x) = (__typeof__(*(__gu_ptr))) __gu_val;					\
+	__gu_err;									\
+})
+
+#define __get_user_nocheck(x, ptr, size)	__do_get_user(0, x, ptr, size, KERNEL_DS)
+#define __get_user_check(x, ptr, size, segment)	__do_get_user(1, x, ptr, size, segment)
+
+extern void __put_user_unknown (void);
+
+/*
+ * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
+ * could clobber r8 (among others).  Thus, be careful not to evaluate them while using r8.
+ */
+#define __do_put_user(check, x, ptr, size, segment)					\
+({											\
+	__typeof__ (x) __pu_x = (x);							\
+	__typeof__ (*(ptr)) __user *__pu_ptr = (ptr);					\
+	__typeof__ (size) __pu_size = (size);						\
+	long __pu_err = -EFAULT;							\
+											\
+	if (!check || __access_ok(__pu_ptr, __pu_size, segment))			\
+		switch (__pu_size) {							\
+		      case 1: __put_user_size(__pu_x, __pu_ptr, 1, __pu_err); break;	\
+		      case 2: __put_user_size(__pu_x, __pu_ptr, 2, __pu_err); break;	\
+		      case 4: __put_user_size(__pu_x, __pu_ptr, 4, __pu_err); break;	\
+		      case 8: __put_user_size(__pu_x, __pu_ptr, 8, __pu_err); break;	\
+		      default: __put_user_unknown(); break;				\
+		}									\
+	__pu_err;									\
+})
+
+#define __put_user_nocheck(x, ptr, size)	__do_put_user(0, x, ptr, size, KERNEL_DS)
+#define __put_user_check(x, ptr, size, segment)	__do_put_user(1, x, ptr, size, segment)
+
+/*
+ * Complex access routines
+ */
+extern unsigned long __must_check __copy_user (void __user *to, const void __user *from,
+					       unsigned long count);
+
+static inline unsigned long
+__copy_to_user (void __user *to, const void *from, unsigned long count)
+{
+	return __copy_user(to, (void __user *) from, count);
+}
+
+static inline unsigned long
+__copy_from_user (void *to, const void __user *from, unsigned long count)
+{
+	return __copy_user((void __user *) to, from, count);
+}
+
+#define __copy_to_user_inatomic		__copy_to_user
+#define __copy_from_user_inatomic	__copy_from_user
+#define copy_to_user(to, from, n)							\
+({											\
+	void __user *__cu_to = (to);							\
+	const void *__cu_from = (from);							\
+	long __cu_len = (n);								\
+											\
+	if (__access_ok(__cu_to, __cu_len, get_fs()))					\
+		__cu_len = __copy_user(__cu_to, (void __user *) __cu_from, __cu_len);	\
+	__cu_len;									\
+})
+
+#define copy_from_user(to, from, n)							\
+({											\
+	void *__cu_to = (to);								\
+	const void __user *__cu_from = (from);						\
+	long __cu_len = (n);								\
+											\
+	__chk_user_ptr(__cu_from);							\
+	if (__access_ok(__cu_from, __cu_len, get_fs()))					\
+		__cu_len = __copy_user((void __user *) __cu_to, __cu_from, __cu_len);	\
+	__cu_len;									\
+})
+
+#define __copy_in_user(to, from, size)	__copy_user((to), (from), (size))
+
+static inline unsigned long
+copy_in_user (void __user *to, const void __user *from, unsigned long n)
+{
+	if (likely(access_ok(VERIFY_READ, from, n) && access_ok(VERIFY_WRITE, to, n)))
+		n = __copy_user(to, from, n);
+	return n;
+}
+
+extern unsigned long __do_clear_user (void __user *, unsigned long);
+
+#define __clear_user(to, n)		__do_clear_user(to, n)
+
+#define clear_user(to, n)					\
+({								\
+	unsigned long __cu_len = (n);				\
+	if (__access_ok(to, __cu_len, get_fs()))		\
+		__cu_len = __do_clear_user(to, __cu_len);	\
+	__cu_len;						\
+})
+
+
+/*
+ * Returns: -EFAULT if exception before terminator, N if the entire buffer filled, else
+ * strlen.
+ */
+extern long __must_check __strncpy_from_user (char *to, const char __user *from, long to_len);
+
+#define strncpy_from_user(to, from, n)					\
+({									\
+	const char __user * __sfu_from = (from);			\
+	long __sfu_ret = -EFAULT;					\
+	if (__access_ok(__sfu_from, 0, get_fs()))			\
+		__sfu_ret = __strncpy_from_user((to), __sfu_from, (n));	\
+	__sfu_ret;							\
+})
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+extern unsigned long __strlen_user (const char __user *);
+
+#define strlen_user(str)				\
+({							\
+	const char __user *__su_str = (str);		\
+	unsigned long __su_ret = 0;			\
+	if (__access_ok(__su_str, 0, get_fs()))		\
+		__su_ret = __strlen_user(__su_str);	\
+	__su_ret;					\
+})
+
+/*
+ * Returns: 0 if exception before NUL or reaching the supplied limit
+ * (N), a value greater than N if the limit would be exceeded, else
+ * strlen.
+ */
+extern unsigned long __strnlen_user (const char __user *, long);
+
+#define strnlen_user(str, len)					\
+({								\
+	const char __user *__su_str = (str);			\
+	unsigned long __su_ret = 0;				\
+	if (__access_ok(__su_str, 0, get_fs()))			\
+		__su_ret = __strnlen_user(__su_str, len);	\
+	__su_ret;						\
+})
+
+/* Generic code can't deal with the location-relative format that we use for compactness.  */
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
+
+struct exception_table_entry {
+	int addr;	/* location-relative address of insn this fixup is for */
+	int cont;	/* location-relative continuation addr.; if bit 2 is set, r9 is set to 0 */
+};
+
+extern void ia64_handle_exception (struct pt_regs *regs, const struct exception_table_entry *e);
+extern const struct exception_table_entry *search_exception_tables (unsigned long addr);
+
+static inline int
+ia64_done_with_exception (struct pt_regs *regs)
+{
+	const struct exception_table_entry *e;
+	e = search_exception_tables(regs->cr_iip + ia64_psr(regs)->ri);
+	if (e) {
+		ia64_handle_exception(regs, e);
+		return 1;
+	}
+	return 0;
+}
+
+#define ARCH_HAS_TRANSLATE_MEM_PTR	1
+static __inline__ char *
+xlate_dev_mem_ptr (unsigned long p)
+{
+	struct page *page;
+	char * ptr;
+
+	page = pfn_to_page(p >> PAGE_SHIFT);
+	if (PageUncached(page))
+		ptr = (char *)p + __IA64_UNCACHED_OFFSET;
+	else
+		ptr = __va(p);
+
+	return ptr;
+}
+
+/*
+ * Convert a virtual cached kernel memory pointer to an uncached pointer
+ */
+static __inline__ char *
+xlate_dev_kmem_ptr (char * p)
+{
+	struct page *page;
+	char * ptr;
+
+	page = virt_to_page((unsigned long)p >> PAGE_SHIFT);
+	if (PageUncached(page))
+		ptr = (char *)__pa(p) + __IA64_UNCACHED_OFFSET;
+	else
+		ptr = p;
+
+	return ptr;
+}
+
+#endif /* _ASM_IA64_UACCESS_H */
diff --git a/include/asm-ia64/ucontext.h b/include/asm-ia64/ucontext.h
new file mode 100644
index 000000000000..bf573dc8ca6a
--- /dev/null
+++ b/include/asm-ia64/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_IA64_UCONTEXT_H
+#define _ASM_IA64_UCONTEXT_H
+
+struct ucontext {
+	struct sigcontext uc_mcontext;
+};
+
+#define uc_link		uc_mcontext.sc_gr[0]	/* wrong type; nobody cares */
+#define uc_sigmask	uc_mcontext.sc_sigmask
+#define uc_stack	uc_mcontext.sc_stack
+
+#endif /* _ASM_IA64_UCONTEXT_H */
diff --git a/include/asm-ia64/unaligned.h b/include/asm-ia64/unaligned.h
new file mode 100644
index 000000000000..bb8559888103
--- /dev/null
+++ b/include/asm-ia64/unaligned.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_IA64_UNALIGNED_H
+#define _ASM_IA64_UNALIGNED_H
+
+#include <asm-generic/unaligned.h>
+
+#endif /* _ASM_IA64_UNALIGNED_H */
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
new file mode 100644
index 000000000000..33e26c557c5c
--- /dev/null
+++ b/include/asm-ia64/unistd.h
@@ -0,0 +1,399 @@
+#ifndef _ASM_IA64_UNISTD_H
+#define _ASM_IA64_UNISTD_H
+
+/*
+ * IA-64 Linux syscall numbers and inline-functions.
+ *
+ * Copyright (C) 1998-2005 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/break.h>
+
+#define __BREAK_SYSCALL			__IA64_BREAK_SYSCALL
+
+#define __NR_ni_syscall			1024
+#define __NR_exit			1025
+#define __NR_read			1026
+#define __NR_write			1027
+#define __NR_open			1028
+#define __NR_close			1029
+#define __NR_creat			1030
+#define __NR_link			1031
+#define __NR_unlink			1032
+#define __NR_execve			1033
+#define __NR_chdir			1034
+#define __NR_fchdir			1035
+#define __NR_utimes			1036
+#define __NR_mknod			1037
+#define __NR_chmod			1038
+#define __NR_chown			1039
+#define __NR_lseek			1040
+#define __NR_getpid			1041
+#define __NR_getppid			1042
+#define __NR_mount			1043
+#define __NR_umount			1044
+#define __NR_setuid			1045
+#define __NR_getuid			1046
+#define __NR_geteuid			1047
+#define __NR_ptrace			1048
+#define __NR_access			1049
+#define __NR_sync			1050
+#define __NR_fsync			1051
+#define __NR_fdatasync			1052
+#define __NR_kill			1053
+#define __NR_rename			1054
+#define __NR_mkdir			1055
+#define __NR_rmdir			1056
+#define __NR_dup			1057
+#define __NR_pipe			1058
+#define __NR_times			1059
+#define __NR_brk			1060
+#define __NR_setgid			1061
+#define __NR_getgid			1062
+#define __NR_getegid			1063
+#define __NR_acct			1064
+#define __NR_ioctl			1065
+#define __NR_fcntl			1066
+#define __NR_umask			1067
+#define __NR_chroot			1068
+#define __NR_ustat			1069
+#define __NR_dup2			1070
+#define __NR_setreuid			1071
+#define __NR_setregid			1072
+#define __NR_getresuid			1073
+#define __NR_setresuid			1074
+#define __NR_getresgid			1075
+#define __NR_setresgid			1076
+#define __NR_getgroups			1077
+#define __NR_setgroups			1078
+#define __NR_getpgid			1079
+#define __NR_setpgid			1080
+#define __NR_setsid			1081
+#define __NR_getsid			1082
+#define __NR_sethostname		1083
+#define __NR_setrlimit			1084
+#define __NR_getrlimit			1085
+#define __NR_getrusage			1086
+#define __NR_gettimeofday		1087
+#define __NR_settimeofday		1088
+#define __NR_select			1089
+#define __NR_poll			1090
+#define __NR_symlink			1091
+#define __NR_readlink			1092
+#define __NR_uselib			1093
+#define __NR_swapon			1094
+#define __NR_swapoff			1095
+#define __NR_reboot			1096
+#define __NR_truncate			1097
+#define __NR_ftruncate			1098
+#define __NR_fchmod			1099
+#define __NR_fchown			1100
+#define __NR_getpriority		1101
+#define __NR_setpriority		1102
+#define __NR_statfs			1103
+#define __NR_fstatfs			1104
+#define __NR_gettid			1105
+#define __NR_semget			1106
+#define __NR_semop			1107
+#define __NR_semctl			1108
+#define __NR_msgget			1109
+#define __NR_msgsnd			1110
+#define __NR_msgrcv			1111
+#define __NR_msgctl			1112
+#define __NR_shmget			1113
+#define __NR_shmat			1114
+#define __NR_shmdt			1115
+#define __NR_shmctl			1116
+/* also known as klogctl() in GNU libc: */
+#define __NR_syslog			1117
+#define __NR_setitimer			1118
+#define __NR_getitimer			1119
+/* 1120 was __NR_old_stat */
+/* 1121 was __NR_old_lstat */
+/* 1122 was __NR_old_fstat */
+#define __NR_vhangup			1123
+#define __NR_lchown			1124
+#define __NR_remap_file_pages		1125
+#define __NR_wait4			1126
+#define __NR_sysinfo			1127
+#define __NR_clone			1128
+#define __NR_setdomainname		1129
+#define __NR_uname			1130
+#define __NR_adjtimex			1131
+/* 1132 was __NR_create_module */
+#define __NR_init_module		1133
+#define __NR_delete_module		1134
+/* 1135 was __NR_get_kernel_syms */
+/* 1136 was __NR_query_module */
+#define __NR_quotactl			1137
+#define __NR_bdflush			1138
+#define __NR_sysfs			1139
+#define __NR_personality		1140
+#define __NR_afs_syscall		1141
+#define __NR_setfsuid			1142
+#define __NR_setfsgid			1143
+#define __NR_getdents			1144
+#define __NR_flock			1145
+#define __NR_readv			1146
+#define __NR_writev			1147
+#define __NR_pread64			1148
+#define __NR_pwrite64			1149
+#define __NR__sysctl			1150
+#define __NR_mmap			1151
+#define __NR_munmap			1152
+#define __NR_mlock			1153
+#define __NR_mlockall			1154
+#define __NR_mprotect			1155
+#define __NR_mremap			1156
+#define __NR_msync			1157
+#define __NR_munlock			1158
+#define __NR_munlockall			1159
+#define __NR_sched_getparam		1160
+#define __NR_sched_setparam		1161
+#define __NR_sched_getscheduler		1162
+#define __NR_sched_setscheduler		1163
+#define __NR_sched_yield		1164
+#define __NR_sched_get_priority_max	1165
+#define __NR_sched_get_priority_min	1166
+#define __NR_sched_rr_get_interval	1167
+#define __NR_nanosleep			1168
+#define __NR_nfsservctl			1169
+#define __NR_prctl			1170
+/* 1171 is reserved for backwards compatibility with old __NR_getpagesize */
+#define __NR_mmap2			1172
+#define __NR_pciconfig_read		1173
+#define __NR_pciconfig_write		1174
+#define __NR_perfmonctl			1175
+#define __NR_sigaltstack		1176
+#define __NR_rt_sigaction		1177
+#define __NR_rt_sigpending		1178
+#define __NR_rt_sigprocmask		1179
+#define __NR_rt_sigqueueinfo		1180
+#define __NR_rt_sigreturn		1181
+#define __NR_rt_sigsuspend		1182
+#define __NR_rt_sigtimedwait		1183
+#define __NR_getcwd			1184
+#define __NR_capget			1185
+#define __NR_capset			1186
+#define __NR_sendfile			1187
+#define __NR_getpmsg			1188
+#define __NR_putpmsg			1189
+#define __NR_socket			1190
+#define __NR_bind			1191
+#define __NR_connect			1192
+#define __NR_listen			1193
+#define __NR_accept			1194
+#define __NR_getsockname		1195
+#define __NR_getpeername		1196
+#define __NR_socketpair			1197
+#define __NR_send			1198
+#define __NR_sendto			1199
+#define __NR_recv			1200
+#define __NR_recvfrom			1201
+#define __NR_shutdown			1202
+#define __NR_setsockopt			1203
+#define __NR_getsockopt			1204
+#define __NR_sendmsg			1205
+#define __NR_recvmsg			1206
+#define __NR_pivot_root			1207
+#define __NR_mincore			1208
+#define __NR_madvise			1209
+#define __NR_stat			1210
+#define __NR_lstat			1211
+#define __NR_fstat			1212
+#define __NR_clone2			1213
+#define __NR_getdents64			1214
+#define __NR_getunwind			1215
+#define __NR_readahead			1216
+#define __NR_setxattr			1217
+#define __NR_lsetxattr			1218
+#define __NR_fsetxattr			1219
+#define __NR_getxattr			1220
+#define __NR_lgetxattr			1221
+#define __NR_fgetxattr			1222
+#define __NR_listxattr			1223
+#define __NR_llistxattr			1224
+#define __NR_flistxattr			1225
+#define __NR_removexattr		1226
+#define __NR_lremovexattr		1227
+#define __NR_fremovexattr		1228
+#define __NR_tkill			1229
+#define __NR_futex			1230
+#define __NR_sched_setaffinity		1231
+#define __NR_sched_getaffinity		1232
+#define __NR_set_tid_address		1233
+#define __NR_fadvise64			1234
+#define __NR_tgkill			1235
+#define __NR_exit_group			1236
+#define __NR_lookup_dcookie		1237
+#define __NR_io_setup			1238
+#define __NR_io_destroy			1239
+#define __NR_io_getevents		1240
+#define __NR_io_submit			1241
+#define __NR_io_cancel			1242
+#define __NR_epoll_create		1243
+#define __NR_epoll_ctl			1244
+#define __NR_epoll_wait			1245
+#define __NR_restart_syscall		1246
+#define __NR_semtimedop			1247
+#define __NR_timer_create		1248
+#define __NR_timer_settime		1249
+#define __NR_timer_gettime		1250
+#define __NR_timer_getoverrun		1251
+#define __NR_timer_delete		1252
+#define __NR_clock_settime		1253
+#define __NR_clock_gettime		1254
+#define __NR_clock_getres		1255
+#define __NR_clock_nanosleep		1256
+#define __NR_fstatfs64			1257
+#define __NR_statfs64			1258
+#define __NR_mbind			1259
+#define __NR_get_mempolicy		1260
+#define __NR_set_mempolicy		1261
+#define __NR_mq_open			1262
+#define __NR_mq_unlink			1263
+#define __NR_mq_timedsend		1264
+#define __NR_mq_timedreceive		1265
+#define __NR_mq_notify			1266
+#define __NR_mq_getsetattr		1267
+#define __NR_kexec_load			1268
+#define __NR_vserver			1269
+#define __NR_waitid			1270
+#define __NR_add_key			1271
+#define __NR_request_key		1272
+#define __NR_keyctl			1273
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+#define NR_syscalls			256 /* length of syscall table */
+
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+#ifdef CONFIG_IA32_SUPPORT
+# define __ARCH_WANT_SYS_FADVISE64
+# define __ARCH_WANT_SYS_GETPGRP
+# define __ARCH_WANT_SYS_LLSEEK
+# define __ARCH_WANT_SYS_NICE
+# define __ARCH_WANT_SYS_OLD_GETRLIMIT
+# define __ARCH_WANT_SYS_OLDUMOUNT
+# define __ARCH_WANT_SYS_SIGPENDING
+# define __ARCH_WANT_SYS_SIGPROCMASK
+# define __ARCH_WANT_COMPAT_SYS_TIME
+#endif
+
+#if !defined(__ASSEMBLY__) && !defined(ASSEMBLER)
+
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <linux/compiler.h>
+
+extern long __ia64_syscall (long a0, long a1, long a2, long a3, long a4, long nr);
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <asm/ptrace.h>
+#include <linux/stringify.h>
+#include <linux/syscalls.h>
+
+static inline long
+open (const char * name, int mode, int flags)
+{
+	return sys_open(name, mode, flags);
+}
+
+static inline long
+dup (int fd)
+{
+	return sys_dup(fd);
+}
+
+static inline long
+close (int fd)
+{
+	return sys_close(fd);
+}
+
+static inline off_t
+lseek (int fd, off_t off, int whence)
+{
+	return sys_lseek(fd, off, whence);
+}
+
+static inline void
+_exit (int value)
+{
+	sys_exit(value);
+}
+
+#define exit(x) _exit(x)
+
+static inline long
+write (int fd, const char * buf, size_t nr)
+{
+	return sys_write(fd, buf, nr);
+}
+
+static inline long
+read (int fd, char * buf, size_t nr)
+{
+	return sys_read(fd, buf, nr);
+}
+
+
+static inline long
+setsid (void)
+{
+	return sys_setsid();
+}
+
+static inline pid_t
+waitpid (int pid, int * wait_stat, int flags)
+{
+	return sys_wait4(pid, wait_stat, flags, NULL);
+}
+
+
+extern int execve (const char *filename, char *const av[], char *const ep[]);
+extern pid_t clone (unsigned long flags, void *sp);
+
+#endif /* __KERNEL_SYSCALLS__ */
+
+asmlinkage unsigned long sys_mmap(
+				unsigned long addr, unsigned long len,
+				int prot, int flags,
+				int fd, long off);
+asmlinkage unsigned long sys_mmap2(
+				unsigned long addr, unsigned long len,
+				int prot, int flags,
+				int fd, long pgoff);
+struct pt_regs;
+struct sigaction;
+long sys_execve(char __user *filename, char __user * __user *argv,
+			   char __user * __user *envp, struct pt_regs *regs);
+asmlinkage long sys_pipe(void);
+asmlinkage long sys_ptrace(long request, pid_t pid,
+			   unsigned long addr, unsigned long data);
+asmlinkage long sys_rt_sigaction(int sig,
+				 const struct sigaction __user *act,
+				 struct sigaction __user *oact,
+				 size_t sigsetsize);
+
+/*
+ * "Conditional" syscalls
+ *
+ * Note, this macro can only be used in the file which defines sys_ni_syscall, i.e., in
+ * kernel/sys_ni.c.  This version causes warnings because the declaration isn't a
+ * proper prototype, but we can't use __typeof__ either, because not all cond_syscall()
+ * declarations have prototypes at the moment.
+ */
+#define cond_syscall(x) asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_IA64_UNISTD_H */
diff --git a/include/asm-ia64/unwind.h b/include/asm-ia64/unwind.h
new file mode 100644
index 000000000000..61426ad3ecdb
--- /dev/null
+++ b/include/asm-ia64/unwind.h
@@ -0,0 +1,240 @@
+#ifndef _ASM_IA64_UNWIND_H
+#define _ASM_IA64_UNWIND_H
+
+/*
+ * Copyright (C) 1999-2000, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * A simple API for unwinding kernel stacks.  This is used for
+ * debugging and error reporting purposes.  The kernel doesn't need
+ * full-blown stack unwinding with all the bells and whitles, so there
+ * is not much point in implementing the full IA-64 unwind API (though
+ * it would of course be possible to implement the kernel API on top
+ * of it).
+ */
+
+struct task_struct;	/* forward declaration */
+struct switch_stack;	/* forward declaration */
+
+enum unw_application_register {
+	UNW_AR_BSP,
+	UNW_AR_BSPSTORE,
+	UNW_AR_PFS,
+	UNW_AR_RNAT,
+	UNW_AR_UNAT,
+	UNW_AR_LC,
+	UNW_AR_EC,
+	UNW_AR_FPSR,
+	UNW_AR_RSC,
+	UNW_AR_CCV,
+	UNW_AR_CSD,
+	UNW_AR_SSD
+};
+
+/*
+ * The following declarations are private to the unwind
+ * implementation:
+ */
+
+struct unw_stack {
+	unsigned long limit;
+	unsigned long top;
+};
+
+#define UNW_FLAG_INTERRUPT_FRAME	(1UL << 0)
+
+/*
+ * No user of this module should every access this structure directly
+ * as it is subject to change.  It is declared here solely so we can
+ * use automatic variables.
+ */
+struct unw_frame_info {
+	struct unw_stack regstk;
+	struct unw_stack memstk;
+	unsigned int flags;
+	short hint;
+	short prev_script;
+
+	/* current frame info: */
+	unsigned long bsp;		/* backing store pointer value */
+	unsigned long sp;		/* stack pointer value */
+	unsigned long psp;		/* previous sp value */
+	unsigned long ip;		/* instruction pointer value */
+	unsigned long pr;		/* current predicate values */
+	unsigned long *cfm_loc;		/* cfm save location (or NULL) */
+	unsigned long pt;		/* struct pt_regs location */
+
+	struct task_struct *task;
+	struct switch_stack *sw;
+
+	/* preserved state: */
+	unsigned long *bsp_loc;		/* previous bsp save location */
+	unsigned long *bspstore_loc;
+	unsigned long *pfs_loc;
+	unsigned long *rnat_loc;
+	unsigned long *rp_loc;
+	unsigned long *pri_unat_loc;
+	unsigned long *unat_loc;
+	unsigned long *pr_loc;
+	unsigned long *lc_loc;
+	unsigned long *fpsr_loc;
+	struct unw_ireg {
+		unsigned long *loc;
+		struct unw_ireg_nat {
+			long type : 3;			/* enum unw_nat_type */
+			signed long off : 61;		/* NaT word is at loc+nat.off */
+		} nat;
+	} r4, r5, r6, r7;
+	unsigned long *b1_loc, *b2_loc, *b3_loc, *b4_loc, *b5_loc;
+	struct ia64_fpreg *f2_loc, *f3_loc, *f4_loc, *f5_loc, *fr_loc[16];
+};
+
+/*
+ * The official API follows below:
+ */
+
+struct unw_table_entry {
+	u64 start_offset;
+	u64 end_offset;
+	u64 info_offset;
+};
+
+/*
+ * Initialize unwind support.
+ */
+extern void unw_init (void);
+
+extern void *unw_add_unwind_table (const char *name, unsigned long segment_base, unsigned long gp,
+				   const void *table_start, const void *table_end);
+
+extern void unw_remove_unwind_table (void *handle);
+
+/*
+ * Prepare to unwind blocked task t.
+ */
+extern void unw_init_from_blocked_task (struct unw_frame_info *info, struct task_struct *t);
+
+/*
+ * Prepare to unwind from interruption.  The pt-regs and switch-stack structures must have
+ * be "adjacent" (no state modifications between pt-regs and switch-stack).
+ */
+extern void unw_init_from_interruption (struct unw_frame_info *info, struct task_struct *t,
+					struct pt_regs *pt, struct switch_stack *sw);
+
+extern void unw_init_frame_info (struct unw_frame_info *info, struct task_struct *t,
+				 struct switch_stack *sw);
+
+/*
+ * Prepare to unwind the currently running thread.
+ */
+extern void unw_init_running (void (*callback)(struct unw_frame_info *info, void *arg), void *arg);
+
+/*
+ * Unwind to previous to frame.  Returns 0 if successful, negative
+ * number in case of an error.
+ */
+extern int unw_unwind (struct unw_frame_info *info);
+
+/*
+ * Unwind until the return pointer is in user-land (or until an error
+ * occurs).  Returns 0 if successful, negative number in case of
+ * error.
+ */
+extern int unw_unwind_to_user (struct unw_frame_info *info);
+
+#define unw_is_intr_frame(info)	(((info)->flags & UNW_FLAG_INTERRUPT_FRAME) != 0)
+
+static inline int
+unw_get_ip (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->ip;
+	return 0;
+}
+
+static inline int
+unw_get_sp (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->sp;
+	return 0;
+}
+
+static inline int
+unw_get_psp (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->psp;
+	return 0;
+}
+
+static inline int
+unw_get_bsp (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->bsp;
+	return 0;
+}
+
+static inline int
+unw_get_cfm (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = *(info)->cfm_loc;
+	return 0;
+}
+
+static inline int
+unw_set_cfm (struct unw_frame_info *info, unsigned long val)
+{
+	*(info)->cfm_loc = val;
+	return 0;
+}
+
+static inline int
+unw_get_rp (struct unw_frame_info *info, unsigned long *val)
+{
+	if (!info->rp_loc)
+		return -1;
+	*val = *info->rp_loc;
+	return 0;
+}
+
+extern int unw_access_gr (struct unw_frame_info *, int, unsigned long *, char *, int);
+extern int unw_access_br (struct unw_frame_info *, int, unsigned long *, int);
+extern int unw_access_fr (struct unw_frame_info *, int, struct ia64_fpreg *, int);
+extern int unw_access_ar (struct unw_frame_info *, int, unsigned long *, int);
+extern int unw_access_pr (struct unw_frame_info *, unsigned long *, int);
+
+static inline int
+unw_set_gr (struct unw_frame_info *i, int n, unsigned long v, char nat)
+{
+	return unw_access_gr(i, n, &v, &nat, 1);
+}
+
+static inline int
+unw_set_br (struct unw_frame_info *i, int n, unsigned long v)
+{
+	return unw_access_br(i, n, &v, 1);
+}
+
+static inline int
+unw_set_fr (struct unw_frame_info *i, int n, struct ia64_fpreg v)
+{
+	return unw_access_fr(i, n, &v, 1);
+}
+
+static inline int
+unw_set_ar (struct unw_frame_info *i, int n, unsigned long v)
+{
+	return unw_access_ar(i, n, &v, 1);
+}
+
+static inline int
+unw_set_pr (struct unw_frame_info *i, unsigned long v)
+{
+	return unw_access_pr(i, &v, 1);
+}
+
+#define unw_get_gr(i,n,v,nat)	unw_access_gr(i,n,v,nat,0)
+#define unw_get_br(i,n,v)	unw_access_br(i,n,v,0)
+#define unw_get_fr(i,n,v)	unw_access_fr(i,n,v,0)
+#define unw_get_ar(i,n,v)	unw_access_ar(i,n,v,0)
+#define unw_get_pr(i,v)		unw_access_pr(i,v,0)
+
+#endif /* _ASM_UNWIND_H */
diff --git a/include/asm-ia64/user.h b/include/asm-ia64/user.h
new file mode 100644
index 000000000000..78e5a20140aa
--- /dev/null
+++ b/include/asm-ia64/user.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_IA64_USER_H
+#define _ASM_IA64_USER_H
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).  The file contents are as
+ * follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ *
+ * Modified 1998, 1999, 2001
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <linux/ptrace.h>
+#include <linux/types.h>
+
+#include <asm/page.h>
+
+#define EF_SIZE		3072	/* XXX fix me */
+
+struct user {
+	unsigned long	regs[EF_SIZE/8+32];	/* integer and fp regs */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	struct regs *	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_IA64_USER_H */
diff --git a/include/asm-ia64/ustack.h b/include/asm-ia64/ustack.h
new file mode 100644
index 000000000000..da55c91246e3
--- /dev/null
+++ b/include/asm-ia64/ustack.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_IA64_USTACK_H
+#define _ASM_IA64_USTACK_H
+
+/*
+ * Constants for the user stack size
+ */
+
+#include <asm/page.h>
+
+/* The absolute hard limit for stack size is 1/2 of the mappable space in the region */
+#define MAX_USER_STACK_SIZE	(RGN_MAP_LIMIT/2)
+/* Make a default stack size of 2GB */
+#define DEFAULT_USER_STACK_SIZE	(1UL << 31)
+#define STACK_TOP		(0x6000000000000000UL + RGN_MAP_LIMIT)
+
+#endif /* _ASM_IA64_USTACK_H */
diff --git a/include/asm-ia64/vga.h b/include/asm-ia64/vga.h
new file mode 100644
index 000000000000..1f446d6841f6
--- /dev/null
+++ b/include/asm-ia64/vga.h
@@ -0,0 +1,22 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ *	(c) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ *	(c) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#ifndef __ASM_IA64_VGA_H_
+#define __ASM_IA64_VGA_H_
+
+/*
+ * On the PC, we can just recalculate addresses and then access the
+ * videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x)	((unsigned long) ioremap((x), 0))
+
+#define vga_readb(x)	(*(x))
+#define vga_writeb(x,y)	(*(y) = (x))
+
+#endif /* __ASM_IA64_VGA_H_ */
diff --git a/include/asm-ia64/xor.h b/include/asm-ia64/xor.h
new file mode 100644
index 000000000000..41fb8744d17a
--- /dev/null
+++ b/include/asm-ia64/xor.h
@@ -0,0 +1,33 @@
+/*
+ * include/asm-ia64/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for IA-64.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+extern void xor_ia64_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_ia64_3(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *);
+extern void xor_ia64_4(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *, unsigned long *);
+extern void xor_ia64_5(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *, unsigned long *, unsigned long *);
+
+static struct xor_block_template xor_block_ia64 = {
+	.name =	"ia64",
+	.do_2 =	xor_ia64_2,
+	.do_3 =	xor_ia64_3,
+	.do_4 =	xor_ia64_4,
+	.do_5 =	xor_ia64_5,
+};
+
+#define XOR_TRY_TEMPLATES	xor_speed(&xor_block_ia64)