[AVR32] Portmux API update

Rename portmux_set_func to at32_select_periph, add at32_select_gpio
and add flags parameter to specify the initial state of the pins.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

2 files changed, 48 insertions, 5 deletions

diff --git a/include/asm-avr32/arch-at32ap/at32ap7000.h b/include/asm-avr32/arch-at32ap/at32ap7000.h
new file mode 100644
index 000000000000..ba85e04553d4
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap/at32ap7000.h
@@ -0,0 +1,33 @@
+/*
+ * Pin definitions for AT32AP7000.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AT32AP7000_H__
+#define __ASM_ARCH_AT32AP7000_H__
+
+#define GPIO_PERIPH_A	0
+#define GPIO_PERIPH_B	1
+
+#define NR_GPIO_CONTROLLERS	4
+
+/*
+ * Pin numbers identifying specific GPIO pins on the chip. They can
+ * also be converted to IRQ numbers by passing them through
+ * gpio_to_irq().
+ */
+#define GPIO_PIOA_BASE	(0)
+#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
+#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
+#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
+
+#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
+#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
+#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
+#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
+
+#endif /* __ASM_ARCH_AT32AP7000_H__ */
diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
index 4d50421262a1..83c690571322 100644
--- a/include/asm-avr32/arch-at32ap/portmux.h
+++ b/include/asm-avr32/arch-at32ap/portmux.h
@@ -7,10 +7,20 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifndef __ASM_AVR32_AT32_PORTMUX_H__
-#define __ASM_AVR32_AT32_PORTMUX_H__
+#ifndef __ASM_ARCH_PORTMUX_H__
+#define __ASM_ARCH_PORTMUX_H__
 
-void portmux_set_func(unsigned int portmux_id, unsigned int pin_id,
-		      unsigned int function_id);
+/*
+ * Set up pin multiplexing, called from board init only.
+ *
+ * The following flags determine the initial state of the pin.
+ */
+#define AT32_GPIOF_PULLUP	0x00000001	/* Enable pull-up */
+#define AT32_GPIOF_OUTPUT	0x00000002	/* Enable output driver */
+#define AT32_GPIOF_HIGH		0x00000004	/* Set output high */
+
+void at32_select_periph(unsigned int pin, unsigned int periph,
+			unsigned long flags);
+void at32_select_gpio(unsigned int pin, unsigned long flags);
 
-#endif /* __ASM_AVR32_AT32_PORTMUX_H__ */
+#endif /* __ASM_ARCH_PORTMUX_H__ */