summaryrefslogtreecommitdiffstats
path: root/fs/ext4/xattr_trusted.c
diff options
context:
space:
mode:
authorJuuso Oikarinen <juuso.oikarinen@nokia.com>2010-06-21 08:59:39 +0300
committerJohn W. Linville <linville@tuxdriver.com>2010-06-21 15:39:59 -0400
commitf90754c15f47063671aea55268a9dd6a37b51492 (patch)
tree197c239a813e426d8a675449927e381352ad4875 /fs/ext4/xattr_trusted.c
parentfb63bc41772259701a827e9a6117219a7393554f (diff)
downloadblackbird-op-linux-f90754c15f47063671aea55268a9dd6a37b51492.tar.gz
blackbird-op-linux-f90754c15f47063671aea55268a9dd6a37b51492.zip
mac80211: Add interface for driver to temporarily disable dynamic ps
This mechanism introduced in this patch applies (at least) for hardware designs using a single shared antenna for both WLAN and BT. In these designs, the antenna must be toggled between WLAN and BT. In those hardware, managing WLAN co-existence with Bluetooth requires WLAN full power save whenever there is Bluetooth activity in order for WLAN to be able to periodically relinquish the antenna to be used for BT. This is because BT can only access the shared antenna when WLAN is idle or asleep. Some hardware, for instance the wl1271, are able to indicate to the host whenever there is BT traffic. In essence, the hardware will send an indication to the host whenever there is, for example, SCO traffic or A2DP traffic, and will send another indication when the traffic is over. The hardware gets information of Bluetooth traffic via hardware co-existence control lines - these lines are used to negotiate the shared antenna ownership. The hardware will give the antenna to BT whenever WLAN is sleeping. This patch adds the interface to mac80211 to facilitate temporarily disabling of dynamic power save as per request of the WLAN driver. This interface will immediately force WLAN to full powersave, hence allowing BT coexistence as described above. In these kind of shared antenna desings, when WLAN powersave is fully disabled, Bluetooth will not work simultaneously with WLAN at all. This patch does not address that problem. This interface will not change PSM state, so if PSM is disabled it will remain so. Solving this problem requires knowledge about BT state, and is best done in user-space. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'fs/ext4/xattr_trusted.c')
0 files changed, 0 insertions, 0 deletions
OpenPOWER on IntegriCloud