[SCSI] qla2xxx: Basic infrastructure for dynamic logging.

This patch adds the dynamic logging framework to the qla2xxx driver.
The user will be able to change the logging levels on the fly i.e.
without load/unload of the driver. This also enables logging to be
enabled for a particular section of the driver such as initialization,
device discovery etc.

Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

5 files changed, 349 insertions, 3 deletions

diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index c53719a9a747..dba9eedc3ded 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -4,10 +4,36 @@
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
+
+/*
+ * Table for showing the current message id in use for particular level
+ * Change this table for addition of log/debug messages.
+ * -----------------------------------------------------
+ * |             Level            |   Last Value Used  |
+ * -----------------------------------------------------
+ * | Module Init and Probe        |       0x0109       |
+ * | Mailbox commands             |       0x1120       |
+ * | Device Discovery             |       0x207d       |
+ * | Queue Command and IO tracing |       0x304f       |
+ * | DPC Thread                   |       0x401c       |
+ * | Async Events                 |       0x5058       |
+ * | Timer Routines               |       0x600d       |
+ * | User Space Interactions      |       0x70a1       |
+ * | Task Management              |       0x8032       |
+ * | AER/EEH                      |       0x9010       |
+ * | Virtual Port                 |       0xa007       |
+ * | ISP82XX Specific             |       0xb028       |
+ * | MultiQ                       |       0xc00b       |
+ * | Misc                         |       0xd00b       |
+ * -----------------------------------------------------
+ */
+
 #include "qla_def.h"
 
 #include <linux/delay.h>
 
+static uint32_t ql_dbg_offset = 0x800;
+
 static inline void
 qla2xxx_prep_dump(struct qla_hw_data *ha, struct qla2xxx_fw_dump *fw_dump)
 {
@@ -1722,3 +1748,255 @@ qla2x00_dump_buffer_zipped(uint8_t *b, uint32_t size)
 		printk(KERN_DEBUG "\n");
 	}
 }
+/*
+ * This function is for formatting and logging debug information.
+ * It is to be used when vha is available. It formats the message
+ * and logs it to the messages file.
+ * parameters:
+ * level: The level of the debug messages to be printed.
+ *        If ql2xextended_error_logging value is correctly set,
+ *        this message will appear in the messages file.
+ * vha:   Pointer to the scsi_qla_host_t.
+ * id:    This is a unique identifier for the level. It identifies the
+ *        part of the code from where the message originated.
+ * msg:   The message to be displayed.
+ */
+void
+ql_dbg(uint32_t level, scsi_qla_host_t *vha, int32_t id, char *msg, ...) {
+
+	char pbuf[QL_DBG_BUF_LEN];
+	va_list ap;
+	uint32_t len;
+	struct pci_dev *pdev = NULL;
+
+	memset(pbuf, 0, QL_DBG_BUF_LEN);
+
+	va_start(ap, msg);
+
+	if ((level & ql2xextended_error_logging) == level) {
+		if (vha != NULL) {
+			pdev = vha->hw->pdev;
+			/* <module-name> <pci-name> <msg-id>:<host> Message */
+			sprintf(pbuf, "%s [%s]-%04x:%ld: ", QL_MSGHDR,
+			    dev_name(&(pdev->dev)), id + ql_dbg_offset,
+			    vha->host_no);
+		} else
+			sprintf(pbuf, "%s [%s]-%04x: : ", QL_MSGHDR,
+			    "0000:00:00.0", id + ql_dbg_offset);
+
+		len = strlen(pbuf);
+		vsprintf(pbuf+len, msg, ap);
+		pr_warning("%s", pbuf);
+	}
+
+	va_end(ap);
+
+}
+
+/*
+ * This function is for formatting and logging debug information.
+ * It is to be used when vha is not available and pci is availble,
+ * i.e., before host allocation. It formats the message and logs it
+ * to the messages file.
+ * parameters:
+ * level: The level of the debug messages to be printed.
+ *        If ql2xextended_error_logging value is correctly set,
+ *        this message will appear in the messages file.
+ * pdev:  Pointer to the struct pci_dev.
+ * id:    This is a unique id for the level. It identifies the part
+ *        of the code from where the message originated.
+ * msg:   The message to be displayed.
+ */
+void
+ql_dbg_pci(uint32_t level, struct pci_dev *pdev, int32_t id, char *msg, ...) {
+
+	char pbuf[QL_DBG_BUF_LEN];
+	va_list ap;
+	uint32_t len;
+
+	if (pdev == NULL)
+		return;
+
+	memset(pbuf, 0, QL_DBG_BUF_LEN);
+
+	va_start(ap, msg);
+
+	if ((level & ql2xextended_error_logging) == level) {
+		/* <module-name> <dev-name>:<msg-id> Message */
+		sprintf(pbuf, "%s [%s]-%04x: : ", QL_MSGHDR,
+		    dev_name(&(pdev->dev)), id + ql_dbg_offset);
+
+		len = strlen(pbuf);
+		vsprintf(pbuf+len, msg, ap);
+		pr_warning("%s", pbuf);
+	}
+
+	va_end(ap);
+
+}
+
+/*
+ * This function is for formatting and logging log messages.
+ * It is to be used when vha is available. It formats the message
+ * and logs it to the messages file. All the messages will be logged
+ * irrespective of value of ql2xextended_error_logging.
+ * parameters:
+ * level: The level of the log messages to be printed in the
+ *        messages file.
+ * vha:   Pointer to the scsi_qla_host_t
+ * id:    This is a unique id for the level. It identifies the
+ *        part of the code from where the message originated.
+ * msg:   The message to be displayed.
+ */
+void
+ql_log(uint32_t level, scsi_qla_host_t *vha, int32_t id, char *msg, ...) {
+
+	char pbuf[QL_DBG_BUF_LEN];
+	va_list ap;
+	uint32_t len;
+	struct pci_dev *pdev = NULL;
+
+	memset(pbuf, 0, QL_DBG_BUF_LEN);
+
+	va_start(ap, msg);
+
+	if (level <= ql_errlev) {
+		if (vha != NULL) {
+			pdev = vha->hw->pdev;
+			/* <module-name> <msg-id>:<host> Message */
+			sprintf(pbuf, "%s [%s]-%04x:%ld: ", QL_MSGHDR,
+			    dev_name(&(pdev->dev)), id, vha->host_no);
+		} else
+			sprintf(pbuf, "%s [%s]-%04x: : ", QL_MSGHDR,
+			    "0000:00:00.0", id);
+
+		len = strlen(pbuf);
+			vsprintf(pbuf+len, msg, ap);
+
+		switch (level) {
+		case 0: /* FATAL LOG */
+			pr_crit("%s", pbuf);
+			break;
+		case 1:
+			pr_err("%s", pbuf);
+			break;
+		case 2:
+			pr_warn("%s", pbuf);
+			break;
+		default:
+			pr_info("%s", pbuf);
+			break;
+		}
+	}
+
+	va_end(ap);
+}
+
+/*
+ * This function is for formatting and logging log messages.
+ * It is to be used when vha is not available and pci is availble,
+ * i.e., before host allocation. It formats the message and logs
+ * it to the messages file. All the messages are logged irrespective
+ * of the value of ql2xextended_error_logging.
+ * parameters:
+ * level: The level of the log messages to be printed in the
+ *        messages file.
+ * pdev:  Pointer to the struct pci_dev.
+ * id:    This is a unique id for the level. It identifies the
+ *        part of the code from where the message originated.
+ * msg:   The message to be displayed.
+ */
+void
+ql_log_pci(uint32_t level, struct pci_dev *pdev, int32_t id, char *msg, ...) {
+
+	char pbuf[QL_DBG_BUF_LEN];
+	va_list ap;
+	uint32_t len;
+
+	if (pdev == NULL)
+		return;
+
+	memset(pbuf, 0, QL_DBG_BUF_LEN);
+
+	va_start(ap, msg);
+
+	if (level <= ql_errlev) {
+		/* <module-name> <dev-name>:<msg-id> Message */
+		sprintf(pbuf, "%s [%s]-%04x: : ", QL_MSGHDR,
+		    dev_name(&(pdev->dev)), id);
+
+		len = strlen(pbuf);
+		vsprintf(pbuf+len, msg, ap);
+		switch (level) {
+		case 0: /* FATAL LOG */
+			pr_crit("%s", pbuf);
+			break;
+		case 1:
+			pr_err("%s", pbuf);
+			break;
+		case 2:
+			pr_warn("%s", pbuf);
+			break;
+		default:
+			pr_info("%s", pbuf);
+			break;
+		}
+	}
+
+	va_end(ap);
+}
+
+void
+ql_dump_regs(uint32_t level, scsi_qla_host_t *vha, int32_t id)
+{
+	int i;
+	struct qla_hw_data *ha = vha->hw;
+	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+	struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
+	struct device_reg_82xx __iomem *reg82 = &ha->iobase->isp82;
+	uint16_t __iomem *mbx_reg;
+
+	if ((level & ql2xextended_error_logging) == level) {
+
+		if (IS_QLA82XX(ha))
+			mbx_reg = &reg82->mailbox_in[0];
+		else if (IS_FWI2_CAPABLE(ha))
+			mbx_reg = &reg24->mailbox0;
+		else
+			mbx_reg = MAILBOX_REG(ha, reg, 0);
+
+		ql_dbg(level, vha, id, "Mailbox registers:\n");
+		for (i = 0; i < 6; i++)
+			ql_dbg(level, vha, id,
+			    "mbox[%d] 0x%04x\n", i, RD_REG_WORD(mbx_reg++));
+	}
+}
+
+
+void
+ql_dump_buffer(uint32_t level, scsi_qla_host_t *vha, int32_t id,
+	uint8_t *b, uint32_t size)
+{
+	uint32_t cnt;
+	uint8_t c;
+	if ((level & ql2xextended_error_logging) == level) {
+
+		ql_dbg(level, vha, id, " 0   1   2   3   4   5   6   7   8   "
+		    "9  Ah  Bh  Ch  Dh  Eh  Fh\n");
+		ql_dbg(level, vha, id, "----------------------------------"
+		    "----------------------------\n");
+
+		ql_dbg(level, vha, id, "");
+		for (cnt = 0; cnt < size;) {
+			c = *b++;
+			printk("%02x", (uint32_t) c);
+			cnt++;
+			if (!(cnt % 16))
+				printk("\n");
+			else
+				printk("  ");
+		}
+		if (cnt % 16)
+			ql_dbg(level, vha, id, "\n");
+	}
+}
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index 930414541ec6..f955094fd5d8 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -370,3 +370,50 @@ struct qla2xxx_fw_dump {
 		struct qla81xx_fw_dump isp81;
 	} isp;
 };
+
+#define QL_MSGHDR "qla2xxx"
+
+#define ql_log_fatal		0 /* display fatal errors */
+#define ql_log_warn		1 /* display critical errors */
+#define ql_log_info		2 /* display all recovered errors */
+#define ql_log_all		3 /* This value is only used by ql_errlev.
+				   * No messages will use this value.
+				   * This should be always highest value
+				   * as compared to other log levels.
+				   */
+
+extern int ql_errlev;
+
+void
+ql_dbg(uint32_t, scsi_qla_host_t *vha, int32_t, char *, ...);
+void
+ql_dbg_pci(uint32_t, struct pci_dev *pdev, int32_t, char *, ...);
+
+void
+ql_log(uint32_t, scsi_qla_host_t *vha, int32_t, char *, ...);
+void
+ql_log_pci(uint32_t, struct pci_dev *pdev, int32_t, char *, ...);
+
+/* Debug Levels */
+/* The 0x40000000 is the max value any debug level can have
+ * as ql2xextended_error_logging is of type signed int
+ */
+#define ql_dbg_init	0x40000000 /* Init Debug */
+#define ql_dbg_mbx	0x20000000 /* MBX Debug */
+#define ql_dbg_disc	0x10000000 /* Device Discovery Debug */
+#define ql_dbg_io	0x08000000 /* IO Tracing Debug */
+#define ql_dbg_dpc	0x04000000 /* DPC Thead Debug */
+#define ql_dbg_async	0x02000000 /* Async events Debug */
+#define ql_dbg_timer	0x01000000 /* Timer Debug */
+#define ql_dbg_user	0x00800000 /* User Space Interations Debug */
+#define ql_dbg_taskm	0x00400000 /* Task Management Debug */
+#define ql_dbg_aer	0x00200000 /* AER/EEH Debug */
+#define ql_dbg_multiq	0x00100000 /* MultiQ Debug */
+#define ql_dbg_p3p	0x00080000 /* P3P specific Debug */
+#define ql_dbg_vport	0x00040000 /* Virtual Port Debug */
+#define ql_dbg_buffer	0x00020000 /* For dumping the buffer/regs */
+#define ql_dbg_misc	0x00010000 /* For dumping everything that is not
+				    * not covered by upper categories
+				    */
+
+#define QL_DBG_BUF_LEN	512
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 0b381224ae4b..38aef5d0515f 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -439,6 +439,9 @@ extern void qla81xx_fw_dump(scsi_qla_host_t *, int);
 extern void qla2x00_dump_regs(scsi_qla_host_t *);
 extern void qla2x00_dump_buffer(uint8_t *, uint32_t);
 extern void qla2x00_dump_buffer_zipped(uint8_t *, uint32_t);
+extern void ql_dump_regs(uint32_t, scsi_qla_host_t *, int32_t);
+extern void ql_dump_buffer(uint32_t, scsi_qla_host_t *, int32_t,
+	uint8_t *, uint32_t);
 
 /*
  * Global Function Prototypes in qla_gs.c source file.
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 920b76bfbb93..3d0384506929 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2382,8 +2382,13 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
 	/*
 	 * Set host adapter parameters.
 	 */
+
+	/*
+	 * BIT_7 in the host-parameters section allows for modification to
+	 * internal driver logging.
+	 */
 	if (nv->host_p[0] & BIT_7)
-		ql2xextended_error_logging = 1;
+		ql2xextended_error_logging = 0x7fffffff;
 	ha->flags.disable_risc_code_load = ((nv->host_p[0] & BIT_4) ? 1 : 0);
 	/* Always load RISC code on non ISP2[12]00 chips. */
 	if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index f461925a9dfc..8aa05c87b653 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -35,6 +35,10 @@ static struct kmem_cache *srb_cachep;
  * CT6 CTX allocation cache
  */
 static struct kmem_cache *ctx_cachep;
+/*
+ * error level for logging
+ */
+int ql_errlev = ql_log_all;
 
 int ql2xlogintimeout = 20;
 module_param(ql2xlogintimeout, int, S_IRUGO);
@@ -69,8 +73,17 @@ MODULE_PARM_DESC(ql2xallocfwdump,
 int ql2xextended_error_logging;
 module_param(ql2xextended_error_logging, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xextended_error_logging,
-		"Option to enable extended error logging, "
-		"Default is 0 - no logging. 1 - log errors.");
+		"Option to enable extended error logging,\n"
+		"\t\tDefault is 0 - no logging.  0x40000000 - Module Init & Probe.\n"
+		"\t\t0x20000000 - Mailbox Cmnds. 0x10000000 - Device Discovery.\n"
+		"\t\t0x08000000 - IO tracing.    0x04000000 - DPC Thread.\n"
+		"\t\t0x02000000 - Async events.  0x01000000 - Timer routines.\n"
+		"\t\t0x00800000 - User space.    0x00400000 - Task Management.\n"
+		"\t\t0x00200000 - AER/EEH.       0x00100000 - Multi Q.\n"
+		"\t\t0x00080000 - P3P Specific.  0x00040000 - Virtual Port.\n"
+		"\t\t0x00020000 - Buffer Dump.   0x00010000 - Misc.\n"
+		"\t\t0x7fffffff - For enabling all logs, can be too many logs.\n"
+		"\t\tDo LOGICAL OR of the value to enable more than one level");
 
 int ql2xshiftctondsd = 6;
 module_param(ql2xshiftctondsd, int, S_IRUGO);