Merge branch 'upstream-fixes'

282 files changed, 8086 insertions, 4451 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index 619dd964c51c..5c69b86db624 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -69,7 +69,7 @@ obj-$(CONFIG_EISA)		+= eisa/
 obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
 obj-$(CONFIG_MMC)		+= mmc/
 obj-$(CONFIG_INFINIBAND)	+= infiniband/
-obj-$(CONFIG_SGI_IOC4)		+= sn/
+obj-$(CONFIG_SGI_SN)		+= sn/
 obj-y				+= firmware/
 obj-$(CONFIG_CRYPTO)		+= crypto/
 obj-$(CONFIG_SUPERH)		+= sh/
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index be2dae52f6fa..eb730a80952c 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -94,7 +94,9 @@ static int set_max_cstate(struct dmi_system_id *id)
 	return 0;
 }
 
-static struct dmi_system_id __initdata processor_power_dmi_table[] = {
+/* Actually this shouldn't be __cpuinitdata, would be better to fix the
+   callers to only run once -AK */
+static struct dmi_system_id __cpuinitdata processor_power_dmi_table[] = {
 	{ set_max_cstate, "IBM ThinkPad R40e", {
 	  DMI_MATCH(DMI_BIOS_VENDOR,"IBM"),
 	  DMI_MATCH(DMI_BIOS_VERSION,"1SET60WW")}, (void *)1},
@@ -899,7 +901,7 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 		case ACPI_STATE_C3:
 			acpi_processor_power_verify_c3(pr, cx);
 #ifdef ARCH_APICTIMER_STOPS_ON_C3
-			if (c->x86_vendor == X86_VENDOR_INTEL) {
+			if (cx->valid && c->x86_vendor == X86_VENDOR_INTEL) {
 				on_each_cpu(switch_APIC_timer_to_ipi,
 						&mask, 1, 1);
 			}
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index f12898d53078..e99471d3232b 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -8,6 +8,7 @@ obj-y			+= power/
 obj-$(CONFIG_FW_LOADER)	+= firmware_class.o
 obj-$(CONFIG_NUMA)	+= node.o
 obj-$(CONFIG_MEMORY_HOTPLUG) += memory.o
+obj-$(CONFIG_SMP)	+= topology.o
 
 ifeq ($(CONFIG_DEBUG_DRIVER),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/base/base.h b/drivers/base/base.h
index e3b548d46cff..5735b38582d0 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -19,6 +19,10 @@ extern void bus_remove_driver(struct device_driver *);
 extern void driver_detach(struct device_driver * drv);
 extern int driver_probe_device(struct device_driver *, struct device *);
 
+extern void sysdev_shutdown(void);
+extern int sysdev_suspend(pm_message_t state);
+extern int sysdev_resume(void);
+
 static inline struct class_device *to_class_dev(struct kobject *obj)
 {
 	return container_of(obj, struct class_device, kobj);
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 29f6af554e71..c3141565d59d 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -133,6 +133,8 @@ static struct kobj_type ktype_bus = {
 decl_subsys(bus, &ktype_bus, NULL);
 
 
+#ifdef CONFIG_HOTPLUG
+
 /* Manually detach a device from its associated driver. */
 static int driver_helper(struct device *dev, void *data)
 {
@@ -193,6 +195,7 @@ static ssize_t driver_bind(struct device_driver *drv,
 }
 static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind);
 
+#endif
 
 static struct device * next_device(struct klist_iter * i)
 {
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index d1a05224627e..105a0d61eb1f 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -303,7 +303,7 @@ static int block_size_init(void)
  */
 #ifdef CONFIG_ARCH_MEMORY_PROBE
 static ssize_t
-memory_probe_store(struct class *class, const char __user *buf, size_t count)
+memory_probe_store(struct class *class, const char *buf, size_t count)
 {
 	u64 phys_addr;
 	int ret;
diff --git a/drivers/base/power/resume.c b/drivers/base/power/resume.c
index 0a7aa07b9a2a..317edbf0feca 100644
--- a/drivers/base/power/resume.c
+++ b/drivers/base/power/resume.c
@@ -9,10 +9,9 @@
  */
 
 #include <linux/device.h>
+#include "../base.h"
 #include "power.h"
 
-extern int sysdev_resume(void);
-
 
 /**
  *	resume_device - Restore state for one device.
diff --git a/drivers/base/power/shutdown.c b/drivers/base/power/shutdown.c
index c2475f3134ea..8826a5b6673e 100644
--- a/drivers/base/power/shutdown.c
+++ b/drivers/base/power/shutdown.c
@@ -12,6 +12,7 @@
 #include <linux/device.h>
 #include <asm/semaphore.h>
 
+#include "../base.h"
 #include "power.h"
 
 #define to_dev(node) container_of(node, struct device, kobj.entry)
@@ -28,7 +29,6 @@ extern struct subsystem devices_subsys;
  * they only get one called once when interrupts are disabled.
  */
 
-extern int sysdev_shutdown(void);
 
 /**
  * device_shutdown - call ->shutdown() on each device to shutdown.
diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c
index 50501764d050..8660779fb288 100644
--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@@ -9,10 +9,9 @@
  */
 
 #include <linux/device.h>
+#include "../base.h"
 #include "power.h"
 
-extern int sysdev_suspend(pm_message_t state);
-
 /*
  * The entries in the dpm_active list are in a depth first order, simply
  * because children are guaranteed to be discovered after parents, and
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index f3a0c562bcb5..40d7242a07c1 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -27,22 +27,30 @@
 
 static ssize_t state_show(struct device * dev, struct device_attribute *attr, char * buf)
 {
-	return sprintf(buf, "%u\n", dev->power.power_state.event);
+	if (dev->power.power_state.event)
+		return sprintf(buf, "2\n");
+	else
+		return sprintf(buf, "0\n");
 }
 
 static ssize_t state_store(struct device * dev, struct device_attribute *attr, const char * buf, size_t n)
 {
 	pm_message_t state;
-	char * rest;
-	int error = 0;
+	int error = -EINVAL;
 
-	state.event = simple_strtoul(buf, &rest, 10);
-	if (*rest)
-		return -EINVAL;
-	if (state.event)
+	state.event = PM_EVENT_SUSPEND;
+	/* Older apps expected to write "3" here - confused with PCI D3 */
+	if ((n == 1) && !strcmp(buf, "3"))
 		error = dpm_runtime_suspend(dev, state);
-	else
+
+	if ((n == 1) && !strcmp(buf, "2"))
+		error = dpm_runtime_suspend(dev, state);
+
+	if ((n == 1) && !strcmp(buf, "0")) {
 		dpm_runtime_resume(dev);
+		error = 0;
+	}
+
 	return error ? error : n;
 }
 
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 66ed8f2fece5..6fc23ab127bd 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -21,8 +21,11 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/pm.h>
+#include <linux/device.h>
 #include <asm/semaphore.h>
 
+#include "base.h"
+
 extern struct subsystem devices_subsys;
 
 #define to_sysdev(k) container_of(k, struct sys_device, kobj)
diff --git a/drivers/base/topology.c b/drivers/base/topology.c
new file mode 100644
index 000000000000..915810f6237e
--- /dev/null
+++ b/drivers/base/topology.c
@@ -0,0 +1,148 @@
+/*
+ * driver/base/topology.c - Populate sysfs with cpu topology information
+ *
+ * Written by: Zhang Yanmin, Intel Corporation
+ *
+ * Copyright (C) 2006, Intel Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/sysdev.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/topology.h>
+
+#define define_one_ro(_name) 		\
+static SYSDEV_ATTR(_name, 0444, show_##_name, NULL)
+
+#define define_id_show_func(name)				\
+static ssize_t show_##name(struct sys_device *dev, char *buf)	\
+{								\
+	unsigned int cpu = dev->id;				\
+	return sprintf(buf, "%d\n", topology_##name(cpu));	\
+}
+
+#define define_siblings_show_func(name)					\
+static ssize_t show_##name(struct sys_device *dev, char *buf)		\
+{									\
+	ssize_t len = -1;						\
+	unsigned int cpu = dev->id;					\
+	len = cpumask_scnprintf(buf, NR_CPUS+1, topology_##name(cpu));	\
+	return (len + sprintf(buf + len, "\n"));			\
+}
+
+#ifdef	topology_physical_package_id
+define_id_show_func(physical_package_id);
+define_one_ro(physical_package_id);
+#define ref_physical_package_id_attr	&attr_physical_package_id.attr,
+#else
+#define ref_physical_package_id_attr
+#endif
+
+#ifdef topology_core_id
+define_id_show_func(core_id);
+define_one_ro(core_id);
+#define ref_core_id_attr		&attr_core_id.attr,
+#else
+#define ref_core_id_attr
+#endif
+
+#ifdef topology_thread_siblings
+define_siblings_show_func(thread_siblings);
+define_one_ro(thread_siblings);
+#define ref_thread_siblings_attr	&attr_thread_siblings.attr,
+#else
+#define ref_thread_siblings_attr
+#endif
+
+#ifdef topology_core_siblings
+define_siblings_show_func(core_siblings);
+define_one_ro(core_siblings);
+#define ref_core_siblings_attr		&attr_core_siblings.attr,
+#else
+#define ref_core_siblings_attr
+#endif
+
+static struct attribute *default_attrs[] = {
+	ref_physical_package_id_attr
+	ref_core_id_attr
+	ref_thread_siblings_attr
+	ref_core_siblings_attr
+	NULL
+};
+
+static struct attribute_group topology_attr_group = {
+	.attrs = default_attrs,
+	.name = "topology"
+};
+
+/* Add/Remove cpu_topology interface for CPU device */
+static int __cpuinit topology_add_dev(struct sys_device * sys_dev)
+{
+	sysfs_create_group(&sys_dev->kobj, &topology_attr_group);
+	return 0;
+}
+
+static int __cpuinit topology_remove_dev(struct sys_device * sys_dev)
+{
+	sysfs_remove_group(&sys_dev->kobj, &topology_attr_group);
+	return 0;
+}
+
+static int __cpuinit topology_cpu_callback(struct notifier_block *nfb,
+		unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+	struct sys_device *sys_dev;
+
+	sys_dev = get_cpu_sysdev(cpu);
+	switch (action) {
+	case CPU_ONLINE:
+		topology_add_dev(sys_dev);
+		break;
+	case CPU_DEAD:
+		topology_remove_dev(sys_dev);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block topology_cpu_notifier =
+{
+	.notifier_call = topology_cpu_callback,
+};
+
+static int __cpuinit topology_sysfs_init(void)
+{
+	int i;
+
+	for_each_online_cpu(i) {
+		topology_cpu_callback(&topology_cpu_notifier, CPU_ONLINE,
+				(void *)(long)i);
+	}
+
+	register_cpu_notifier(&topology_cpu_notifier);
+
+	return 0;
+}
+
+device_initcall(topology_sysfs_init);
+
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 139cbba76180..8b1331677407 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -433,12 +433,12 @@ config CDROM_PKTCDVD_BUFFERS
 	  This controls the maximum number of active concurrent packets. More
 	  concurrent packets can increase write performance, but also require
 	  more memory. Each concurrent packet will require approximately 64Kb
-	  of non-swappable kernel memory, memory which will be allocated at
-	  pktsetup time.
+	  of non-swappable kernel memory, memory which will be allocated when
+	  a disc is opened for writing.
 
 config CDROM_PKTCDVD_WCACHE
-	bool "Enable write caching"
-	depends on CDROM_PKTCDVD
+	bool "Enable write caching (EXPERIMENTAL)"
+	depends on CDROM_PKTCDVD && EXPERIMENTAL
 	help
 	  If enabled, write caching will be set for the CD-R/W device. For now
 	  this option is dangerous unless the CD-RW media is known good, as we
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 12d7b9bdfa93..0d65394707db 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -2183,6 +2183,7 @@ static void cciss_softirq_done(struct request *rq)
 {
 	CommandList_struct *cmd = rq->completion_data;
 	ctlr_info_t *h = hba[cmd->ctlr];
+	unsigned long flags;
 	u64bit temp64;
 	int i, ddir;
 
@@ -2205,10 +2206,10 @@ static void cciss_softirq_done(struct request *rq)
 	printk("Done with %p\n", rq);
 #endif /* CCISS_DEBUG */ 
 
-	spin_lock_irq(&h->lock);
+	spin_lock_irqsave(&h->lock, flags);
 	end_that_request_last(rq, rq->errors);
 	cmd_free(h, cmd,1);
-	spin_unlock_irq(&h->lock);
+	spin_unlock_irqrestore(&h->lock, flags);
 }
 
 /* checks the status of the job and calls complete buffers to mark all 
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 93affeeef7bd..4e7dbcc425ff 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -43,8 +43,6 @@
  *
  *************************************************************************/
 
-#define VERSION_CODE	"v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com"
-
 #include <linux/pktcdvd.h>
 #include <linux/config.h>
 #include <linux/module.h>
@@ -131,7 +129,7 @@ static struct bio *pkt_bio_alloc(int nr_iovecs)
 /*
  * Allocate a packet_data struct
  */
-static struct packet_data *pkt_alloc_packet_data(void)
+static struct packet_data *pkt_alloc_packet_data(int frames)
 {
 	int i;
 	struct packet_data *pkt;
@@ -140,11 +138,12 @@ static struct packet_data *pkt_alloc_packet_data(void)
 	if (!pkt)
 		goto no_pkt;
 
-	pkt->w_bio = pkt_bio_alloc(PACKET_MAX_SIZE);
+	pkt->frames = frames;
+	pkt->w_bio = pkt_bio_alloc(frames);
 	if (!pkt->w_bio)
 		goto no_bio;
 
-	for (i = 0; i < PAGES_PER_PACKET; i++) {
+	for (i = 0; i < frames / FRAMES_PER_PAGE; i++) {
 		pkt->pages[i] = alloc_page(GFP_KERNEL|__GFP_ZERO);
 		if (!pkt->pages[i])
 			goto no_page;
@@ -152,7 +151,7 @@ static struct packet_data *pkt_alloc_packet_data(void)
 
 	spin_lock_init(&pkt->lock);
 
-	for (i = 0; i < PACKET_MAX_SIZE; i++) {
+	for (i = 0; i < frames; i++) {
 		struct bio *bio = pkt_bio_alloc(1);
 		if (!bio)
 			goto no_rd_bio;
@@ -162,14 +161,14 @@ static struct packet_data *pkt_alloc_packet_data(void)
 	return pkt;
 
 no_rd_bio:
-	for (i = 0; i < PACKET_MAX_SIZE; i++) {
+	for (i = 0; i < frames; i++) {
 		struct bio *bio = pkt->r_bios[i];
 		if (bio)
 			bio_put(bio);
 	}
 
 no_page:
-	for (i = 0; i < PAGES_PER_PACKET; i++)
+	for (i = 0; i < frames / FRAMES_PER_PAGE; i++)
 		if (pkt->pages[i])
 			__free_page(pkt->pages[i]);
 	bio_put(pkt->w_bio);
@@ -186,12 +185,12 @@ static void pkt_free_packet_data(struct packet_data *pkt)
 {
 	int i;
 
-	for (i = 0; i < PACKET_MAX_SIZE; i++) {
+	for (i = 0; i < pkt->frames; i++) {
 		struct bio *bio = pkt->r_bios[i];
 		if (bio)
 			bio_put(bio);
 	}
-	for (i = 0; i < PAGES_PER_PACKET; i++)
+	for (i = 0; i < pkt->frames / FRAMES_PER_PAGE; i++)
 		__free_page(pkt->pages[i]);
 	bio_put(pkt->w_bio);
 	kfree(pkt);
@@ -206,17 +205,17 @@ static void pkt_shrink_pktlist(struct pktcdvd_device *pd)
 	list_for_each_entry_safe(pkt, next, &pd->cdrw.pkt_free_list, list) {
 		pkt_free_packet_data(pkt);
 	}
+	INIT_LIST_HEAD(&pd->cdrw.pkt_free_list);
 }
 
 static int pkt_grow_pktlist(struct pktcdvd_device *pd, int nr_packets)
 {
 	struct packet_data *pkt;
 
-	INIT_LIST_HEAD(&pd->cdrw.pkt_free_list);
-	INIT_LIST_HEAD(&pd->cdrw.pkt_active_list);
-	spin_lock_init(&pd->cdrw.active_list_lock);
+	BUG_ON(!list_empty(&pd->cdrw.pkt_free_list));
+
 	while (nr_packets > 0) {
-		pkt = pkt_alloc_packet_data();
+		pkt = pkt_alloc_packet_data(pd->settings.size >> 2);
 		if (!pkt) {
 			pkt_shrink_pktlist(pd);
 			return 0;
@@ -951,7 +950,7 @@ try_next_bio:
 
 	pd->current_sector = zone + pd->settings.size;
 	pkt->sector = zone;
-	pkt->frames = pd->settings.size >> 2;
+	BUG_ON(pkt->frames != pd->settings.size >> 2);
 	pkt->write_size = 0;
 
 	/*
@@ -1639,7 +1638,7 @@ static int pkt_probe_settings(struct pktcdvd_device *pd)
 	pd->settings.size = be32_to_cpu(ti.fixed_packet_size) << 2;
 	if (pd->settings.size == 0) {
 		printk("pktcdvd: detected zero packet size!\n");
-		pd->settings.size = 128;
+		return -ENXIO;
 	}
 	if (pd->settings.size > PACKET_MAX_SECTORS) {
 		printk("pktcdvd: packet size is too big\n");
@@ -1987,8 +1986,14 @@ static int pkt_open_dev(struct pktcdvd_device *pd, int write)
 	if ((ret = pkt_set_segment_merging(pd, q)))
 		goto out_unclaim;
 
-	if (write)
+	if (write) {
+		if (!pkt_grow_pktlist(pd, CONFIG_CDROM_PKTCDVD_BUFFERS)) {
+			printk("pktcdvd: not enough memory for buffers\n");
+			ret = -ENOMEM;
+			goto out_unclaim;
+		}
 		printk("pktcdvd: %lukB available on disc\n", lba << 1);
+	}
 
 	return 0;
 
@@ -2014,6 +2019,8 @@ static void pkt_release_dev(struct pktcdvd_device *pd, int flush)
 	pkt_set_speed(pd, MAX_SPEED, MAX_SPEED);
 	bd_release(pd->bdev);
 	blkdev_put(pd->bdev);
+
+	pkt_shrink_pktlist(pd);
 }
 
 static struct pktcdvd_device *pkt_find_dev_from_minor(int dev_minor)
@@ -2379,12 +2386,6 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev)
 	/* This is safe, since we have a reference from open(). */
 	__module_get(THIS_MODULE);
 
-	if (!pkt_grow_pktlist(pd, CONFIG_CDROM_PKTCDVD_BUFFERS)) {
-		printk("pktcdvd: not enough memory for buffers\n");
-		ret = -ENOMEM;
-		goto out_mem;
-	}
-
 	pd->bdev = bdev;
 	set_blocksize(bdev, CD_FRAMESIZE);
 
@@ -2395,7 +2396,7 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev)
 	if (IS_ERR(pd->cdrw.thread)) {
 		printk("pktcdvd: can't start kernel thread\n");
 		ret = -ENOMEM;
-		goto out_thread;
+		goto out_mem;
 	}
 
 	proc = create_proc_entry(pd->name, 0, pkt_proc);
@@ -2406,8 +2407,6 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev)
 	DPRINTK("pktcdvd: writer %s mapped to %s\n", pd->name, bdevname(bdev, b));
 	return 0;
 
-out_thread:
-	pkt_shrink_pktlist(pd);
 out_mem:
 	blkdev_put(bdev);
 	/* This is safe: open() is still holding a reference. */
@@ -2503,6 +2502,10 @@ static int pkt_setup_dev(struct pkt_ctrl_command *ctrl_cmd)
 		goto out_mem;
 	pd->disk = disk;
 
+	INIT_LIST_HEAD(&pd->cdrw.pkt_free_list);
+	INIT_LIST_HEAD(&pd->cdrw.pkt_active_list);
+	spin_lock_init(&pd->cdrw.active_list_lock);
+
 	spin_lock_init(&pd->lock);
 	spin_lock_init(&pd->iosched.lock);
 	sprintf(pd->name, "pktcdvd%d", idx);
@@ -2567,8 +2570,6 @@ static int pkt_remove_dev(struct pkt_ctrl_command *ctrl_cmd)
 
 	blkdev_put(pd->bdev);
 
-	pkt_shrink_pktlist(pd);
-
 	remove_proc_entry(pd->name, pkt_proc);
 	DPRINTK("pktcdvd: writer %s unmapped\n", pd->name);
 
@@ -2678,7 +2679,6 @@ static int __init pkt_init(void)
 
 	pkt_proc = proc_mkdir("pktcdvd", proc_root_driver);
 
-	DPRINTK("pktcdvd: %s\n", VERSION_CODE);
 	return 0;
 
 out:
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index a3614e6a68d0..4ada1268b40d 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -882,7 +882,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i
 	       card->card_number, dev->bus->number, dev->devfn);
 
 	if (pci_set_dma_mask(dev, 0xffffffffffffffffLL) &&
-	    !pci_set_dma_mask(dev, 0xffffffffLL)) {
+	    pci_set_dma_mask(dev, 0xffffffffLL)) {
 		printk(KERN_WARNING "MM%d: NO suitable DMA found\n",num_cards);
 		return  -ENOMEM;
 	}
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 193446e6a08a..e27617259552 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -42,8 +42,6 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 
-#include <asm/bug.h>
-
 #include <asm/vio.h>
 #include <asm/scatterlist.h>
 #include <asm/iseries/hv_types.h>
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 4c67727d75b1..05ba410682a3 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -222,7 +222,7 @@ config SYNCLINKMP
 
 config SYNCLINK_GT
 	tristate "SyncLink GT/AC support"
-	depends on SERIAL_NONSTANDARD
+	depends on SERIAL_NONSTANDARD && PCI
 	help
 	  Support for SyncLink GT and SyncLink AC families of
 	  synchronous and asynchronous serial adapters
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 39c61a71176e..cc7acf877dc0 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -1233,7 +1233,7 @@ cyy_interrupt(int irq, void *dev_id, struct pt_regs *regs)
                             }
                              info->idle_stats.recv_idle = jiffies;
                         }
-                        schedule_delayed_work(&tty->buf.work, 1);
+			tty_schedule_flip(tty);
                     }
                     /* end of service */
                     cy_writeb(base_addr+(CyRIR<<index), (save_xir & 0x3f));
@@ -1606,7 +1606,7 @@ cyz_handle_rx(struct cyclades_port *info,
 	    }
 #endif
 	    info->idle_stats.recv_idle = jiffies;
-	    schedule_delayed_work(&tty->buf.work, 1);
+	    tty_schedule_flip(tty);
 	}
 	/* Update rx_get */
 	cy_writel(&buf_ctrl->rx_get, new_rx_get);
@@ -1809,7 +1809,7 @@ cyz_handle_cmd(struct cyclades_card *cinfo)
 	if(delta_count)
 	    cy_sched_event(info, Cy_EVENT_DELTA_WAKEUP);
 	if(special_count)
-	    schedule_delayed_work(&tty->buf.work, 1);
+	    tty_schedule_flip(tty);
     }
 }
 
diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c
index 5485382cadec..bd7be09ea53d 100644
--- a/drivers/char/drm/ati_pcigart.c
+++ b/drivers/char/drm/ati_pcigart.c
@@ -59,17 +59,16 @@ static void *drm_ati_alloc_pcigart_table(void)
 	int i;
 	DRM_DEBUG("%s\n", __FUNCTION__);
 
-	address = __get_free_pages(GFP_KERNEL, ATI_PCIGART_TABLE_ORDER);
+	address = __get_free_pages(GFP_KERNEL | __GFP_COMP,
+				   ATI_PCIGART_TABLE_ORDER);
 	if (address == 0UL) {
-		return 0;
+		return NULL;
 	}
 
 	page = virt_to_page(address);
 
-	for (i = 0; i < ATI_PCIGART_TABLE_PAGES; i++, page++) {
-		get_page(page);
+	for (i = 0; i < ATI_PCIGART_TABLE_PAGES; i++, page++)
 		SetPageReserved(page);
-	}
 
 	DRM_DEBUG("%s: returning 0x%08lx\n", __FUNCTION__, address);
 	return (void *)address;
@@ -83,10 +82,8 @@ static void drm_ati_free_pcigart_table(void *address)
 
 	page = virt_to_page((unsigned long)address);
 
-	for (i = 0; i < ATI_PCIGART_TABLE_PAGES; i++, page++) {
-		__put_page(page);
+	for (i = 0; i < ATI_PCIGART_TABLE_PAGES; i++, page++)
 		ClearPageReserved(page);
-	}
 
 	free_pages((unsigned long)address, ATI_PCIGART_TABLE_ORDER);
 }
@@ -127,7 +124,7 @@ int drm_ati_pcigart_cleanup(drm_device_t *dev, drm_ati_pcigart_info *gart_info)
 	if (gart_info->gart_table_location == DRM_ATI_GART_MAIN
 	    && gart_info->addr) {
 		drm_ati_free_pcigart_table(gart_info->addr);
-		gart_info->addr = 0;
+		gart_info->addr = NULL;
 	}
 
 	return 1;
@@ -168,7 +165,7 @@ int drm_ati_pcigart_init(drm_device_t *dev, drm_ati_pcigart_info *gart_info)
 		if (bus_address == 0) {
 			DRM_ERROR("unable to map PCIGART pages!\n");
 			drm_ati_free_pcigart_table(address);
-			address = 0;
+			address = NULL;
 			goto done;
 		}
 	} else {
diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h
index 54b561e69486..107df9fdba4e 100644
--- a/drivers/char/drm/drmP.h
+++ b/drivers/char/drm/drmP.h
@@ -57,6 +57,7 @@
 #include <linux/smp_lock.h>	/* For (un)lock_kernel */
 #include <linux/mm.h>
 #include <linux/cdev.h>
+#include <linux/mutex.h>
 #if defined(__alpha__) || defined(__powerpc__)
 #include <asm/pgtable.h>	/* For pte_wrprotect */
 #endif
@@ -623,7 +624,7 @@ typedef struct drm_device {
 	/** \name Locks */
 	/*@{ */
 	spinlock_t count_lock;		/**< For inuse, drm_device::open_count, drm_device::buf_use */
-	struct semaphore struct_sem;	/**< For others */
+	struct mutex struct_mutex;	/**< For others */
 	/*@} */
 
 	/** \name Usage Counters */
@@ -658,7 +659,7 @@ typedef struct drm_device {
 	/*@{ */
 	drm_ctx_list_t *ctxlist;	/**< Linked list of context handles */
 	int ctx_count;			/**< Number of context handles */
-	struct semaphore ctxlist_sem;	/**< For ctxlist */
+	struct mutex ctxlist_mutex;	/**< For ctxlist */
 
 	drm_map_t **context_sareas;	    /**< per-context SAREA's */
 	int max_context;
@@ -979,7 +980,7 @@ extern int drm_put_head(drm_head_t * head);
 extern unsigned int drm_debug;
 extern unsigned int drm_cards_limit;
 extern drm_head_t **drm_heads;
-extern struct drm_sysfs_class *drm_class;
+extern struct class *drm_class;
 extern struct proc_dir_entry *drm_proc_root;
 
 				/* Proc support (drm_proc.h) */
@@ -1010,11 +1011,9 @@ extern void __drm_pci_free(drm_device_t * dev, drm_dma_handle_t * dmah);
 extern void drm_pci_free(drm_device_t * dev, drm_dma_handle_t * dmah);
 
 			       /* sysfs support (drm_sysfs.c) */
-struct drm_sysfs_class;
-extern struct drm_sysfs_class *drm_sysfs_create(struct module *owner,
-						char *name);
-extern void drm_sysfs_destroy(struct drm_sysfs_class *cs);
-extern struct class_device *drm_sysfs_device_add(struct drm_sysfs_class *cs,
+extern struct class *drm_sysfs_create(struct module *owner, char *name);
+extern void drm_sysfs_destroy(struct class *cs);
+extern struct class_device *drm_sysfs_device_add(struct class *cs,
 						 drm_head_t *head);
 extern void drm_sysfs_device_remove(struct class_device *class_dev);
 
diff --git a/drivers/char/drm/drm_auth.c b/drivers/char/drm/drm_auth.c
index a47b502bc7cc..2a37586a7ee8 100644
--- a/drivers/char/drm/drm_auth.c
+++ b/drivers/char/drm/drm_auth.c
@@ -56,7 +56,7 @@ static int drm_hash_magic(drm_magic_t magic)
  * \param magic magic number.
  *
  * Searches in drm_device::magiclist within all files with the same hash key
- * the one with matching magic number, while holding the drm_device::struct_sem
+ * the one with matching magic number, while holding the drm_device::struct_mutex
  * lock.
  */
 static drm_file_t *drm_find_file(drm_device_t * dev, drm_magic_t magic)
@@ -65,14 +65,14 @@ static drm_file_t *drm_find_file(drm_device_t * dev, drm_magic_t magic)
 	drm_magic_entry_t *pt;
 	int hash = drm_hash_magic(magic);
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	for (pt = dev->magiclist[hash].head; pt; pt = pt->next) {
 		if (pt->magic == magic) {
 			retval = pt->priv;
 			break;
 		}
 	}
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 	return retval;
 }
 
@@ -85,7 +85,7 @@ static drm_file_t *drm_find_file(drm_device_t * dev, drm_magic_t magic)
  *
  * Creates a drm_magic_entry structure and appends to the linked list
  * associated the magic number hash key in drm_device::magiclist, while holding
- * the drm_device::struct_sem lock.
+ * the drm_device::struct_mutex lock.
  */
 static int drm_add_magic(drm_device_t * dev, drm_file_t * priv,
 			 drm_magic_t magic)
@@ -104,7 +104,7 @@ static int drm_add_magic(drm_device_t * dev, drm_file_t * priv,
 	entry->priv = priv;
 	entry->next = NULL;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	if (dev->magiclist[hash].tail) {
 		dev->magiclist[hash].tail->next = entry;
 		dev->magiclist[hash].tail = entry;
@@ -112,7 +112,7 @@ static int drm_add_magic(drm_device_t * dev, drm_file_t * priv,
 		dev->magiclist[hash].head = entry;
 		dev->magiclist[hash].tail = entry;
 	}
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	return 0;
 }
@@ -124,7 +124,7 @@ static int drm_add_magic(drm_device_t * dev, drm_file_t * priv,
  * \param magic magic number.
  *
  * Searches and unlinks the entry in drm_device::magiclist with the magic
- * number hash key, while holding the drm_device::struct_sem lock.
+ * number hash key, while holding the drm_device::struct_mutex lock.
  */
 static int drm_remove_magic(drm_device_t * dev, drm_magic_t magic)
 {
@@ -135,7 +135,7 @@ static int drm_remove_magic(drm_device_t * dev, drm_magic_t magic)
 	DRM_DEBUG("%d\n", magic);
 	hash = drm_hash_magic(magic);
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	for (pt = dev->magiclist[hash].head; pt; prev = pt, pt = pt->next) {
 		if (pt->magic == magic) {
 			if (dev->magiclist[hash].head == pt) {
@@ -147,11 +147,11 @@ static int drm_remove_magic(drm_device_t * dev, drm_magic_t magic)
 			if (prev) {
 				prev->next = pt->next;
 			}
-			up(&dev->struct_sem);
+			mutex_unlock(&dev->struct_mutex);
 			return 0;
 		}
 	}
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	drm_free(pt, sizeof(*pt), DRM_MEM_MAGIC);
 
diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c
index 1db12dcb6802..e2637b4d51de 100644
--- a/drivers/char/drm/drm_bufs.c
+++ b/drivers/char/drm/drm_bufs.c
@@ -255,14 +255,14 @@ static int drm_addmap_core(drm_device_t * dev, unsigned int offset,
 	memset(list, 0, sizeof(*list));
 	list->map = map;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	list_add(&list->head, &dev->maplist->head);
 	/* Assign a 32-bit handle */
-	/* We do it here so that dev->struct_sem protects the increment */
+	/* We do it here so that dev->struct_mutex protects the increment */
 	list->user_token = HandleID(map->type == _DRM_SHM
 				    ? (unsigned long)map->handle
 				    : map->offset, dev);
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	*maplist = list;
 	return 0;
@@ -392,9 +392,9 @@ int drm_rmmap(drm_device_t *dev, drm_local_map_t *map)
 {
 	int ret;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	ret = drm_rmmap_locked(dev, map);
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	return ret;
 }
@@ -423,7 +423,7 @@ int drm_rmmap_ioctl(struct inode *inode, struct file *filp,
 		return -EFAULT;
 	}
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	list_for_each(list, &dev->maplist->head) {
 		drm_map_list_t *r_list = list_entry(list, drm_map_list_t, head);
 
@@ -439,7 +439,7 @@ int drm_rmmap_ioctl(struct inode *inode, struct file *filp,
 	 * find anything.
 	 */
 	if (list == (&dev->maplist->head)) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		return -EINVAL;
 	}
 
@@ -448,13 +448,13 @@ int drm_rmmap_ioctl(struct inode *inode, struct file *filp,
 
 	/* Register and framebuffer maps are permanent */
 	if ((map->type == _DRM_REGISTERS) || (map->type == _DRM_FRAME_BUFFER)) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		return 0;
 	}
 
 	ret = drm_rmmap_locked(dev, map);
 
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	return ret;
 }
@@ -566,16 +566,16 @@ int drm_addbufs_agp(drm_device_t * dev, drm_buf_desc_t * request)
 	atomic_inc(&dev->buf_alloc);
 	spin_unlock(&dev->count_lock);
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	entry = &dma->bufs[order];
 	if (entry->buf_count) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;	/* May only call once for each order */
 	}
 
 	if (count < 0 || count > 4096) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -EINVAL;
 	}
@@ -583,7 +583,7 @@ int drm_addbufs_agp(drm_device_t * dev, drm_buf_desc_t * request)
 	entry->buflist = drm_alloc(count * sizeof(*entry->buflist),
 				   DRM_MEM_BUFS);
 	if (!entry->buflist) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;
 	}
@@ -616,7 +616,7 @@ int drm_addbufs_agp(drm_device_t * dev, drm_buf_desc_t * request)
 			/* Set count correctly so we free the proper amount. */
 			entry->buf_count = count;
 			drm_cleanup_buf_error(dev, entry);
-			up(&dev->struct_sem);
+			mutex_unlock(&dev->struct_mutex);
 			atomic_dec(&dev->buf_alloc);
 			return -ENOMEM;
 		}
@@ -638,7 +638,7 @@ int drm_addbufs_agp(drm_device_t * dev, drm_buf_desc_t * request)
 	if (!temp_buflist) {
 		/* Free the entry because it isn't valid */
 		drm_cleanup_buf_error(dev, entry);
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;
 	}
@@ -656,7 +656,7 @@ int drm_addbufs_agp(drm_device_t * dev, drm_buf_desc_t * request)
 	DRM_DEBUG("dma->buf_count : %d\n", dma->buf_count);
 	DRM_DEBUG("entry->buf_count : %d\n", entry->buf_count);
 
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	request->count = entry->buf_count;
 	request->size = size;
@@ -722,16 +722,16 @@ int drm_addbufs_pci(drm_device_t * dev, drm_buf_desc_t * request)
 	atomic_inc(&dev->buf_alloc);
 	spin_unlock(&dev->count_lock);
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	entry = &dma->bufs[order];
 	if (entry->buf_count) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;	/* May only call once for each order */
 	}
 
 	if (count < 0 || count > 4096) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -EINVAL;
 	}
@@ -739,7 +739,7 @@ int drm_addbufs_pci(drm_device_t * dev, drm_buf_desc_t * request)
 	entry->buflist = drm_alloc(count * sizeof(*entry->buflist),
 				   DRM_MEM_BUFS);
 	if (!entry->buflist) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;
 	}
@@ -750,7 +750,7 @@ int drm_addbufs_pci(drm_device_t * dev, drm_buf_desc_t * request)
 	if (!entry->seglist) {
 		drm_free(entry->buflist,
 			 count * sizeof(*entry->buflist), DRM_MEM_BUFS);
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;
 	}
@@ -766,7 +766,7 @@ int drm_addbufs_pci(drm_device_t * dev, drm_buf_desc_t * request)
 			 count * sizeof(*entry->buflist), DRM_MEM_BUFS);
 		drm_free(entry->seglist,
 			 count * sizeof(*entry->seglist), DRM_MEM_SEGS);
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;
 	}
@@ -790,7 +790,7 @@ int drm_addbufs_pci(drm_device_t * dev, drm_buf_desc_t * request)
 			drm_free(temp_pagelist,
 				 (dma->page_count + (count << page_order))
 				 * sizeof(*dma->pagelist), DRM_MEM_PAGES);
-			up(&dev->struct_sem);
+			mutex_unlock(&dev->struct_mutex);
 			atomic_dec(&dev->buf_alloc);
 			return -ENOMEM;
 		}
@@ -831,7 +831,7 @@ int drm_addbufs_pci(drm_device_t * dev, drm_buf_desc_t * request)
 					  (count << page_order))
 					 * sizeof(*dma->pagelist),
 					 DRM_MEM_PAGES);
-				up(&dev->struct_sem);
+				mutex_unlock(&dev->struct_mutex);
 				atomic_dec(&dev->buf_alloc);
 				return -ENOMEM;
 			}
@@ -853,7 +853,7 @@ int drm_addbufs_pci(drm_device_t * dev, drm_buf_desc_t * request)
 		drm_free(temp_pagelist,
 			 (dma->page_count + (count << page_order))
 			 * sizeof(*dma->pagelist), DRM_MEM_PAGES);
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;
 	}
@@ -878,7 +878,7 @@ int drm_addbufs_pci(drm_device_t * dev, drm_buf_desc_t * request)
 	dma->page_count += entry->seg_count << page_order;
 	dma->byte_count += PAGE_SIZE * (entry->seg_count << page_order);
 
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	request->count = entry->buf_count;
 	request->size = size;
@@ -948,16 +948,16 @@ static int drm_addbufs_sg(drm_device_t * dev, drm_buf_desc_t * request)
 	atomic_inc(&dev->buf_alloc);
 	spin_unlock(&dev->count_lock);
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	entry = &dma->bufs[order];
 	if (entry->buf_count) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;	/* May only call once for each order */
 	}
 
 	if (count < 0 || count > 4096) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -EINVAL;
 	}
@@ -965,7 +965,7 @@ static int drm_addbufs_sg(drm_device_t * dev, drm_buf_desc_t * request)
 	entry->buflist = drm_alloc(count * sizeof(*entry->buflist),
 				   DRM_MEM_BUFS);
 	if (!entry->buflist) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;
 	}
@@ -999,7 +999,7 @@ static int drm_addbufs_sg(drm_device_t * dev, drm_buf_desc_t * request)
 			/* Set count correctly so we free the proper amount. */
 			entry->buf_count = count;
 			drm_cleanup_buf_error(dev, entry);
-			up(&dev->struct_sem);
+			mutex_unlock(&dev->struct_mutex);
 			atomic_dec(&dev->buf_alloc);
 			return -ENOMEM;
 		}
@@ -1022,7 +1022,7 @@ static int drm_addbufs_sg(drm_device_t * dev, drm_buf_desc_t * request)
 	if (!temp_buflist) {
 		/* Free the entry because it isn't valid */
 		drm_cleanup_buf_error(dev, entry);
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;
 	}
@@ -1040,7 +1040,7 @@ static int drm_addbufs_sg(drm_device_t * dev, drm_buf_desc_t * request)
 	DRM_DEBUG("dma->buf_count : %d\n", dma->buf_count);
 	DRM_DEBUG("entry->buf_count : %d\n", entry->buf_count);
 
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	request->count = entry->buf_count;
 	request->size = size;
@@ -1110,16 +1110,16 @@ int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request)
 	atomic_inc(&dev->buf_alloc);
 	spin_unlock(&dev->count_lock);
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	entry = &dma->bufs[order];
 	if (entry->buf_count) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;	/* May only call once for each order */
 	}
 
 	if (count < 0 || count > 4096) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -EINVAL;
 	}
@@ -1127,7 +1127,7 @@ int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request)
 	entry->buflist = drm_alloc(count * sizeof(*entry->buflist),
 				   DRM_MEM_BUFS);
 	if (!entry->buflist) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;
 	}
@@ -1160,7 +1160,7 @@ int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request)
 			/* Set count correctly so we free the proper amount. */
 			entry->buf_count = count;
 			drm_cleanup_buf_error(dev, entry);
-			up(&dev->struct_sem);
+			mutex_unlock(&dev->struct_mutex);
 			atomic_dec(&dev->buf_alloc);
 			return -ENOMEM;
 		}
@@ -1182,7 +1182,7 @@ int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request)
 	if (!temp_buflist) {
 		/* Free the entry because it isn't valid */
 		drm_cleanup_buf_error(dev, entry);
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		atomic_dec(&dev->buf_alloc);
 		return -ENOMEM;
 	}
@@ -1200,7 +1200,7 @@ int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request)
 	DRM_DEBUG("dma->buf_count : %d\n", dma->buf_count);
 	DRM_DEBUG("entry->buf_count : %d\n", entry->buf_count);
 
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	request->count = entry->buf_count;
 	request->size = size;
diff --git a/drivers/char/drm/drm_context.c b/drivers/char/drm/drm_context.c
index f84254526949..83094c73da67 100644
--- a/drivers/char/drm/drm_context.c
+++ b/drivers/char/drm/drm_context.c
@@ -53,7 +53,7 @@
  * \param ctx_handle context handle.
  *
  * Clears the bit specified by \p ctx_handle in drm_device::ctx_bitmap and the entry
- * in drm_device::context_sareas, while holding the drm_device::struct_sem
+ * in drm_device::context_sareas, while holding the drm_device::struct_mutex
  * lock.
  */
 void drm_ctxbitmap_free(drm_device_t * dev, int ctx_handle)
@@ -64,10 +64,10 @@ void drm_ctxbitmap_free(drm_device_t * dev, int ctx_handle)
 		goto failed;
 
 	if (ctx_handle < DRM_MAX_CTXBITMAP) {
-		down(&dev->struct_sem);
+		mutex_lock(&dev->struct_mutex);
 		clear_bit(ctx_handle, dev->ctx_bitmap);
 		dev->context_sareas[ctx_handle] = NULL;
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		return;
 	}
       failed:
@@ -83,7 +83,7 @@ void drm_ctxbitmap_free(drm_device_t * dev, int ctx_handle)
  *
  * Find the first zero bit in drm_device::ctx_bitmap and (re)allocates
  * drm_device::context_sareas to accommodate the new entry while holding the
- * drm_device::struct_sem lock.
+ * drm_device::struct_mutex lock.
  */
 static int drm_ctxbitmap_next(drm_device_t * dev)
 {
@@ -92,7 +92,7 @@ static int drm_ctxbitmap_next(drm_device_t * dev)
 	if (!dev->ctx_bitmap)
 		return -1;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	bit = find_first_zero_bit(dev->ctx_bitmap, DRM_MAX_CTXBITMAP);
 	if (bit < DRM_MAX_CTXBITMAP) {
 		set_bit(bit, dev->ctx_bitmap);
@@ -113,7 +113,7 @@ static int drm_ctxbitmap_next(drm_device_t * dev)
 							 DRM_MEM_MAPS);
 				if (!ctx_sareas) {
 					clear_bit(bit, dev->ctx_bitmap);
-					up(&dev->struct_sem);
+					mutex_unlock(&dev->struct_mutex);
 					return -1;
 				}
 				dev->context_sareas = ctx_sareas;
@@ -126,16 +126,16 @@ static int drm_ctxbitmap_next(drm_device_t * dev)
 					      DRM_MEM_MAPS);
 				if (!dev->context_sareas) {
 					clear_bit(bit, dev->ctx_bitmap);
-					up(&dev->struct_sem);
+					mutex_unlock(&dev->struct_mutex);
 					return -1;
 				}
 				dev->context_sareas[bit] = NULL;
 			}
 		}
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		return bit;
 	}
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 	return -1;
 }
 
@@ -145,24 +145,24 @@ static int drm_ctxbitmap_next(drm_device_t * dev)
  * \param dev DRM device.
  *
  * Allocates and initialize drm_device::ctx_bitmap and drm_device::context_sareas, while holding
- * the drm_device::struct_sem lock.
+ * the drm_device::struct_mutex lock.
  */
 int drm_ctxbitmap_init(drm_device_t * dev)
 {
 	int i;
 	int temp;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	dev->ctx_bitmap = (unsigned long *)drm_alloc(PAGE_SIZE,
 						     DRM_MEM_CTXBITMAP);
 	if (dev->ctx_bitmap == NULL) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		return -ENOMEM;
 	}
 	memset((void *)dev->ctx_bitmap, 0, PAGE_SIZE);
 	dev->context_sareas = NULL;
 	dev->max_context = -1;
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	for (i = 0; i < DRM_RESERVED_CONTEXTS; i++) {
 		temp = drm_ctxbitmap_next(dev);
@@ -178,17 +178,17 @@ int drm_ctxbitmap_init(drm_device_t * dev)
  * \param dev DRM device.
  *
  * Frees drm_device::ctx_bitmap and drm_device::context_sareas, while holding
- * the drm_device::struct_sem lock.
+ * the drm_device::struct_mutex lock.
  */
 void drm_ctxbitmap_cleanup(drm_device_t * dev)
 {
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	if (dev->context_sareas)
 		drm_free(dev->context_sareas,
 			 sizeof(*dev->context_sareas) *
 			 dev->max_context, DRM_MEM_MAPS);
 	drm_free((void *)dev->ctx_bitmap, PAGE_SIZE, DRM_MEM_CTXBITMAP);
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 }
 
 /*@}*/
@@ -222,15 +222,15 @@ int drm_getsareactx(struct inode *inode, struct file *filp,
 	if (copy_from_user(&request, argp, sizeof(request)))
 		return -EFAULT;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	if (dev->max_context < 0
 	    || request.ctx_id >= (unsigned)dev->max_context) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		return -EINVAL;
 	}
 
 	map = dev->context_sareas[request.ctx_id];
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	request.handle = NULL;
 	list_for_each_entry(_entry, &dev->maplist->head, head) {
@@ -274,7 +274,7 @@ int drm_setsareactx(struct inode *inode, struct file *filp,
 			   (drm_ctx_priv_map_t __user *) arg, sizeof(request)))
 		return -EFAULT;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	list_for_each(list, &dev->maplist->head) {
 		r_list = list_entry(list, drm_map_list_t, head);
 		if (r_list->map
@@ -282,7 +282,7 @@ int drm_setsareactx(struct inode *inode, struct file *filp,
 			goto found;
 	}
       bad:
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 	return -EINVAL;
 
       found:
@@ -294,7 +294,7 @@ int drm_setsareactx(struct inode *inode, struct file *filp,
 	if (request.ctx_id >= (unsigned)dev->max_context)
 		goto bad;
 	dev->context_sareas[request.ctx_id] = map;
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 	return 0;
 }
 
@@ -448,10 +448,10 @@ int drm_addctx(struct inode *inode, struct file *filp,
 	ctx_entry->handle = ctx.handle;
 	ctx_entry->tag = priv;
 
-	down(&dev->ctxlist_sem);
+	mutex_lock(&dev->ctxlist_mutex);
 	list_add(&ctx_entry->head, &dev->ctxlist->head);
 	++dev->ctx_count;
-	up(&dev->ctxlist_sem);
+	mutex_unlock(&dev->ctxlist_mutex);
 
 	if (copy_to_user(argp, &ctx, sizeof(ctx)))
 		return -EFAULT;
@@ -574,7 +574,7 @@ int drm_rmctx(struct inode *inode, struct file *filp,
 		drm_ctxbitmap_free(dev, ctx.handle);
 	}
 
-	down(&dev->ctxlist_sem);
+	mutex_lock(&dev->ctxlist_mutex);
 	if (!list_empty(&dev->ctxlist->head)) {
 		drm_ctx_list_t *pos, *n;
 
@@ -586,7 +586,7 @@ int drm_rmctx(struct inode *inode, struct file *filp,
 			}
 		}
 	}
-	up(&dev->ctxlist_sem);
+	mutex_unlock(&dev->ctxlist_mutex);
 
 	return 0;
 }
diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c
index c4fa5a29582b..dc6bbe8a18dc 100644
--- a/drivers/char/drm/drm_drv.c
+++ b/drivers/char/drm/drm_drv.c
@@ -151,7 +151,7 @@ int drm_lastclose(drm_device_t * dev)
 	if (dev->irq_enabled)
 		drm_irq_uninstall(dev);
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	del_timer(&dev->timer);
 
 	/* Clear pid list */
@@ -231,7 +231,7 @@ int drm_lastclose(drm_device_t * dev)
 		dev->lock.filp = NULL;
 		wake_up_interruptible(&dev->lock.lock_queue);
 	}
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	DRM_DEBUG("lastclose completed\n");
 	return 0;
diff --git a/drivers/char/drm/drm_fops.c b/drivers/char/drm/drm_fops.c
index 403f44a1bf01..641f7633878c 100644
--- a/drivers/char/drm/drm_fops.c
+++ b/drivers/char/drm/drm_fops.c
@@ -262,7 +262,7 @@ static int drm_open_helper(struct inode *inode, struct file *filp,
 			goto out_free;
 	}
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	if (!dev->file_last) {
 		priv->next = NULL;
 		priv->prev = NULL;
@@ -276,7 +276,7 @@ static int drm_open_helper(struct inode *inode, struct file *filp,
 		dev->file_last->next = priv;
 		dev->file_last = priv;
 	}
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 #ifdef __alpha__
 	/*
@@ -413,7 +413,7 @@ int drm_release(struct inode *inode, struct file *filp)
 
 	drm_fasync(-1, filp, 0);
 
-	down(&dev->ctxlist_sem);
+	mutex_lock(&dev->ctxlist_mutex);
 	if (dev->ctxlist && (!list_empty(&dev->ctxlist->head))) {
 		drm_ctx_list_t *pos, *n;
 
@@ -432,9 +432,9 @@ int drm_release(struct inode *inode, struct file *filp)
 			}
 		}
 	}
-	up(&dev->ctxlist_sem);
+	mutex_unlock(&dev->ctxlist_mutex);
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	if (priv->remove_auth_on_close == 1) {
 		drm_file_t *temp = dev->file_first;
 		while (temp) {
@@ -452,7 +452,7 @@ int drm_release(struct inode *inode, struct file *filp)
 	} else {
 		dev->file_last = priv->prev;
 	}
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	if (dev->driver->postclose)
 		dev->driver->postclose(dev, priv);
diff --git a/drivers/char/drm/drm_ioctl.c b/drivers/char/drm/drm_ioctl.c
index bcd4e604d3ec..555f323b8a32 100644
--- a/drivers/char/drm/drm_ioctl.c
+++ b/drivers/char/drm/drm_ioctl.c
@@ -194,9 +194,9 @@ int drm_getmap(struct inode *inode, struct file *filp,
 		return -EFAULT;
 	idx = map.offset;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	if (idx < 0) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		return -EINVAL;
 	}
 
@@ -209,7 +209,7 @@ int drm_getmap(struct inode *inode, struct file *filp,
 		i++;
 	}
 	if (!r_list || !r_list->map) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		return -EINVAL;
 	}
 
@@ -219,7 +219,7 @@ int drm_getmap(struct inode *inode, struct file *filp,
 	map.flags = r_list->map->flags;
 	map.handle = (void *)(unsigned long)r_list->user_token;
 	map.mtrr = r_list->map->mtrr;
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	if (copy_to_user(argp, &map, sizeof(map)))
 		return -EFAULT;
@@ -253,11 +253,11 @@ int drm_getclient(struct inode *inode, struct file *filp,
 	if (copy_from_user(&client, argp, sizeof(client)))
 		return -EFAULT;
 	idx = client.idx;
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	for (i = 0, pt = dev->file_first; i < idx && pt; i++, pt = pt->next) ;
 
 	if (!pt) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		return -EINVAL;
 	}
 	client.auth = pt->authenticated;
@@ -265,7 +265,7 @@ int drm_getclient(struct inode *inode, struct file *filp,
 	client.uid = pt->uid;
 	client.magic = pt->magic;
 	client.iocs = pt->ioctl_count;
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	if (copy_to_user(argp, &client, sizeof(client)))
 		return -EFAULT;
@@ -292,7 +292,7 @@ int drm_getstats(struct inode *inode, struct file *filp,
 
 	memset(&stats, 0, sizeof(stats));
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 
 	for (i = 0; i < dev->counters; i++) {
 		if (dev->types[i] == _DRM_STAT_LOCK)
@@ -305,7 +305,7 @@ int drm_getstats(struct inode *inode, struct file *filp,
 
 	stats.count = dev->counters;
 
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	if (copy_to_user((drm_stats_t __user *) arg, &stats, sizeof(stats)))
 		return -EFAULT;
diff --git a/drivers/char/drm/drm_irq.c b/drivers/char/drm/drm_irq.c
index b0d4b236e837..611a1173091d 100644
--- a/drivers/char/drm/drm_irq.c
+++ b/drivers/char/drm/drm_irq.c
@@ -98,20 +98,20 @@ static int drm_irq_install(drm_device_t * dev)
 	if (dev->irq == 0)
 		return -EINVAL;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 
 	/* Driver must have been initialized */
 	if (!dev->dev_private) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		return -EINVAL;
 	}
 
 	if (dev->irq_enabled) {
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		return -EBUSY;
 	}
 	dev->irq_enabled = 1;
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	DRM_DEBUG("%s: irq=%d\n", __FUNCTION__, dev->irq);
 
@@ -135,9 +135,9 @@ static int drm_irq_install(drm_device_t * dev)
 	ret = request_irq(dev->irq, dev->driver->irq_handler,
 			  sh_flags, dev->devname, dev);
 	if (ret < 0) {
-		down(&dev->struct_sem);
+		mutex_lock(&dev->struct_mutex);
 		dev->irq_enabled = 0;
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 		return ret;
 	}
 
@@ -161,10 +161,10 @@ int drm_irq_uninstall(drm_device_t * dev)
 	if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
 		return -EINVAL;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	irq_enabled = dev->irq_enabled;
 	dev->irq_enabled = 0;
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 
 	if (!irq_enabled)
 		return -EINVAL;
diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h
index 5b1d3a04458d..8fd6357a48da 100644
--- a/drivers/char/drm/drm_pciids.h
+++ b/drivers/char/drm/drm_pciids.h
@@ -3,6 +3,7 @@
    Please contact dri-devel@lists.sf.net to add new cards to this list
 */
 #define radeon_PCI_IDS \
+	{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350},\
 	{0x1002, 0x4136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS100|CHIP_IS_IGP}, \
 	{0x1002, 0x4137, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|CHIP_IS_IGP}, \
 	{0x1002, 0x4144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
@@ -242,5 +243,6 @@
 	{0x8086, 0x2582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0x8086, 0x2592, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x27a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0, 0, 0}
 
diff --git a/drivers/char/drm/drm_proc.c b/drivers/char/drm/drm_proc.c
index 6f943e3309ef..362a270af0f1 100644
--- a/drivers/char/drm/drm_proc.c
+++ b/drivers/char/drm/drm_proc.c
@@ -258,7 +258,7 @@ static int drm__vm_info(char *buf, char **start, off_t offset, int request,
 }
 
 /**
- * Simply calls _vm_info() while holding the drm_device::struct_sem lock.
+ * Simply calls _vm_info() while holding the drm_device::struct_mutex lock.
  */
 static int drm_vm_info(char *buf, char **start, off_t offset, int request,
 		       int *eof, void *data)
@@ -266,9 +266,9 @@ static int drm_vm_info(char *buf, char **start, off_t offset, int request,
 	drm_device_t *dev = (drm_device_t *) data;
 	int ret;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	ret = drm__vm_info(buf, start, offset, request, eof, data);
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 	return ret;
 }
 
@@ -331,7 +331,7 @@ static int drm__queues_info(char *buf, char **start, off_t offset,
 }
 
 /**
- * Simply calls _queues_info() while holding the drm_device::struct_sem lock.
+ * Simply calls _queues_info() while holding the drm_device::struct_mutex lock.
  */
 static int drm_queues_info(char *buf, char **start, off_t offset, int request,
 			   int *eof, void *data)
@@ -339,9 +339,9 @@ static int drm_queues_info(char *buf, char **start, off_t offset, int request,
 	drm_device_t *dev = (drm_device_t *) data;
 	int ret;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	ret = drm__queues_info(buf, start, offset, request, eof, data);
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 	return ret;
 }
 
@@ -403,7 +403,7 @@ static int drm__bufs_info(char *buf, char **start, off_t offset, int request,
 }
 
 /**
- * Simply calls _bufs_info() while holding the drm_device::struct_sem lock.
+ * Simply calls _bufs_info() while holding the drm_device::struct_mutex lock.
  */
 static int drm_bufs_info(char *buf, char **start, off_t offset, int request,
 			 int *eof, void *data)
@@ -411,9 +411,9 @@ static int drm_bufs_info(char *buf, char **start, off_t offset, int request,
 	drm_device_t *dev = (drm_device_t *) data;
 	int ret;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	ret = drm__bufs_info(buf, start, offset, request, eof, data);
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 	return ret;
 }
 
@@ -459,7 +459,7 @@ static int drm__clients_info(char *buf, char **start, off_t offset,
 }
 
 /**
- * Simply calls _clients_info() while holding the drm_device::struct_sem lock.
+ * Simply calls _clients_info() while holding the drm_device::struct_mutex lock.
  */
 static int drm_clients_info(char *buf, char **start, off_t offset,
 			    int request, int *eof, void *data)
@@ -467,9 +467,9 @@ static int drm_clients_info(char *buf, char **start, off_t offset,
 	drm_device_t *dev = (drm_device_t *) data;
 	int ret;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	ret = drm__clients_info(buf, start, offset, request, eof, data);
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 	return ret;
 }
 
@@ -540,9 +540,9 @@ static int drm_vma_info(char *buf, char **start, off_t offset, int request,
 	drm_device_t *dev = (drm_device_t *) data;
 	int ret;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	ret = drm__vma_info(buf, start, offset, request, eof, data);
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 	return ret;
 }
 #endif
diff --git a/drivers/char/drm/drm_stub.c b/drivers/char/drm/drm_stub.c
index 42d766359caa..68073e14fdec 100644
--- a/drivers/char/drm/drm_stub.c
+++ b/drivers/char/drm/drm_stub.c
@@ -50,7 +50,7 @@ module_param_named(cards_limit, drm_cards_limit, int, 0444);
 module_param_named(debug, drm_debug, int, 0600);
 
 drm_head_t **drm_heads;
-struct drm_sysfs_class *drm_class;
+struct class *drm_class;
 struct proc_dir_entry *drm_proc_root;
 
 static int drm_fill_in_dev(drm_device_t * dev, struct pci_dev *pdev,
@@ -61,8 +61,8 @@ static int drm_fill_in_dev(drm_device_t * dev, struct pci_dev *pdev,
 
 	spin_lock_init(&dev->count_lock);
 	init_timer(&dev->timer);
-	sema_init(&dev->struct_sem, 1);
-	sema_init(&dev->ctxlist_sem, 1);
+	mutex_init(&dev->struct_mutex);
+	mutex_init(&dev->ctxlist_mutex);
 
 	dev->pdev = pdev;
 
diff --git a/drivers/char/drm/drm_sysfs.c b/drivers/char/drm/drm_sysfs.c
index 68e43ddc16ae..0b9f98a7eb10 100644
--- a/drivers/char/drm/drm_sysfs.c
+++ b/drivers/char/drm/drm_sysfs.c
@@ -1,3 +1,4 @@
+
 /*
  * drm_sysfs.c - Modifications to drm_sysfs_class.c to support
  *               extra sysfs attribute from DRM. Normal drm_sysfs_class
@@ -19,36 +20,6 @@
 #include "drm_core.h"
 #include "drmP.h"
 
-struct drm_sysfs_class {
-	struct class_device_attribute attr;
-	struct class class;
-};
-#define to_drm_sysfs_class(d) container_of(d, struct drm_sysfs_class, class)
-
-struct simple_dev {
-	dev_t dev;
-	struct class_device class_dev;
-};
-#define to_simple_dev(d) container_of(d, struct simple_dev, class_dev)
-
-static void release_simple_dev(struct class_device *class_dev)
-{
-	struct simple_dev *s_dev = to_simple_dev(class_dev);
-	kfree(s_dev);
-}
-
-static ssize_t show_dev(struct class_device *class_dev, char *buf)
-{
-	struct simple_dev *s_dev = to_simple_dev(class_dev);
-	return print_dev_t(buf, s_dev->dev);
-}
-
-static void drm_sysfs_class_release(struct class *class)
-{
-	struct drm_sysfs_class *cs = to_drm_sysfs_class(class);
-	kfree(cs);
-}
-
 /* Display the version of drm_core. This doesn't work right in current design */
 static ssize_t version_show(struct class *dev, char *buf)
 {
@@ -69,38 +40,16 @@ static CLASS_ATTR(version, S_IRUGO, version_show, NULL);
  * Note, the pointer created here is to be destroyed when finished by making a
  * call to drm_sysfs_destroy().
  */
-struct drm_sysfs_class *drm_sysfs_create(struct module *owner, char *name)
+struct class *drm_sysfs_create(struct module *owner, char *name)
 {
-	struct drm_sysfs_class *cs;
-	int retval;
-
-	cs = kmalloc(sizeof(*cs), GFP_KERNEL);
-	if (!cs) {
-		retval = -ENOMEM;
-		goto error;
-	}
-	memset(cs, 0x00, sizeof(*cs));
-
-	cs->class.name = name;
-	cs->class.class_release = drm_sysfs_class_release;
-	cs->class.release = release_simple_dev;
-
-	cs->attr.attr.name = "dev";
-	cs->attr.attr.mode = S_IRUGO;
-	cs->attr.attr.owner = owner;
-	cs->attr.show = show_dev;
-	cs->attr.store = NULL;
-
-	retval = class_register(&cs->class);
-	if (retval)
-		goto error;
-	class_create_file(&cs->class, &class_attr_version);
-
-	return cs;
-
-      error:
-	kfree(cs);
-	return ERR_PTR(retval);
+	struct class *class;
+
+	class = class_create(owner, name);
+	if (!class)
+		return class;
+
+	class_create_file(class, &class_attr_version);
+	return class;
 }
 
 /**
@@ -110,12 +59,13 @@ struct drm_sysfs_class *drm_sysfs_create(struct module *owner, char *name)
  * Note, the pointer to be destroyed must have been created with a call to
  * drm_sysfs_create().
  */
-void drm_sysfs_destroy(struct drm_sysfs_class *cs)
+void drm_sysfs_destroy(struct class *class)
 {
-	if ((cs == NULL) || (IS_ERR(cs)))
+	if ((class == NULL) || (IS_ERR(class)))
 		return;
 
-	class_unregister(&cs->class);
+	class_remove_file(class, &class_attr_version);
+	class_destroy(class);
 }
 
 static ssize_t show_dri(struct class_device *class_device, char *buf)
@@ -132,7 +82,7 @@ static struct class_device_attribute class_device_attrs[] = {
 
 /**
  * drm_sysfs_device_add - adds a class device to sysfs for a character driver
- * @cs: pointer to the struct drm_sysfs_class that this device should be registered to.
+ * @cs: pointer to the struct class that this device should be registered to.
  * @dev: the dev_t for the device to be added.
  * @device: a pointer to a struct device that is assiociated with this class device.
  * @fmt: string for the class device's name
@@ -141,46 +91,26 @@ static struct class_device_attribute class_device_attrs[] = {
  * class.  A "dev" file will be created, showing the dev_t for the device.  The
  * pointer to the struct class_device will be returned from the call.  Any further
  * sysfs files that might be required can be created using this pointer.
- * Note: the struct drm_sysfs_class passed to this function must have previously been
+ * Note: the struct class passed to this function must have previously been
  * created with a call to drm_sysfs_create().
  */
-struct class_device *drm_sysfs_device_add(struct drm_sysfs_class *cs,
-					  drm_head_t *head)
+struct class_device *drm_sysfs_device_add(struct class *cs, drm_head_t *head)
 {
-	struct simple_dev *s_dev = NULL;
-	int i, retval;
-
-	if ((cs == NULL) || (IS_ERR(cs))) {
-		retval = -ENODEV;
-		goto error;
-	}
-
-	s_dev = kmalloc(sizeof(*s_dev), GFP_KERNEL);
-	if (!s_dev) {
-		retval = -ENOMEM;
-		goto error;
-	}
-	memset(s_dev, 0x00, sizeof(*s_dev));
-
-	s_dev->dev = MKDEV(DRM_MAJOR, head->minor);
-	s_dev->class_dev.dev = &(head->dev->pdev)->dev;
-	s_dev->class_dev.class = &cs->class;
+	struct class_device *class_dev;
+	int i;
 
-	snprintf(s_dev->class_dev.class_id, BUS_ID_SIZE, "card%d", head->minor);
-	retval = class_device_register(&s_dev->class_dev);
-	if (retval)
-		goto error;
+	class_dev = class_device_create(cs, NULL,
+					MKDEV(DRM_MAJOR, head->minor),
+					&(head->dev->pdev)->dev,
+					"card%d", head->minor);
+	if (!class_dev)
+		return NULL;
 
-	class_device_create_file(&s_dev->class_dev, &cs->attr);
-	class_set_devdata(&s_dev->class_dev, head);
+	class_set_devdata(class_dev, head);
 
 	for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++)
-		class_device_create_file(&s_dev->class_dev, &class_device_attrs[i]);
-	return &s_dev->class_dev;
-
-error:
-	kfree(s_dev);
-	return ERR_PTR(retval);
+		class_device_create_file(class_dev, &class_device_attrs[i]);
+	return class_dev;
 }
 
 /**
@@ -192,10 +122,9 @@ error:
  */
 void drm_sysfs_device_remove(struct class_device *class_dev)
 {
-	struct simple_dev *s_dev = to_simple_dev(class_dev);
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++)
-		class_device_remove_file(&s_dev->class_dev, &class_device_attrs[i]);
-	class_device_unregister(&s_dev->class_dev);
+		class_device_remove_file(class_dev, &class_device_attrs[i]);
+	class_device_unregister(class_dev);
 }
diff --git a/drivers/char/drm/drm_vm.c b/drivers/char/drm/drm_vm.c
index 3f73aa774c80..0291cd62c69f 100644
--- a/drivers/char/drm/drm_vm.c
+++ b/drivers/char/drm/drm_vm.c
@@ -188,7 +188,7 @@ static void drm_vm_shm_close(struct vm_area_struct *vma)
 
 	map = vma->vm_private_data;
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	for (pt = dev->vmalist, prev = NULL; pt; pt = next) {
 		next = pt->next;
 		if (pt->vma->vm_private_data == map)
@@ -248,7 +248,7 @@ static void drm_vm_shm_close(struct vm_area_struct *vma)
 			drm_free(map, sizeof(*map), DRM_MEM_MAPS);
 		}
 	}
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 }
 
 /**
@@ -404,12 +404,12 @@ static void drm_vm_open(struct vm_area_struct *vma)
 
 	vma_entry = drm_alloc(sizeof(*vma_entry), DRM_MEM_VMAS);
 	if (vma_entry) {
-		down(&dev->struct_sem);
+		mutex_lock(&dev->struct_mutex);
 		vma_entry->vma = vma;
 		vma_entry->next = dev->vmalist;
 		vma_entry->pid = current->pid;
 		dev->vmalist = vma_entry;
-		up(&dev->struct_sem);
+		mutex_unlock(&dev->struct_mutex);
 	}
 }
 
@@ -431,7 +431,7 @@ static void drm_vm_close(struct vm_area_struct *vma)
 		  vma->vm_start, vma->vm_end - vma->vm_start);
 	atomic_dec(&dev->vma_count);
 
-	down(&dev->struct_sem);
+	mutex_lock(&dev->struct_mutex);
 	for (pt = dev->vmalist, prev = NULL; pt; prev = pt, pt = pt->next) {
 		if (pt->vma == vma) {
 			if (prev) {
@@ -443,7 +443,7 @@ static void drm_vm_close(struct vm_area_struct *vma)
 			break;
 		}
 	}
-	up(&dev->struct_sem);
+	mutex_unlock(&dev->struct_mutex);
 }
 
 /**
diff --git a/drivers/char/drm/i810_dma.c b/drivers/char/drm/i810_dma.c
index cc1b89086876..ae0aa6d7e0bb 100644
--- a/drivers/char/drm/i810_dma.c
+++ b/drivers/char/drm/i810_dma.c
@@ -958,7 +958,7 @@ static int i810_flush_queue(drm_device_t * dev)
 }
 
 /* Must be called with the lock held */
-void i810_reclaim_buffers(drm_device_t * dev, struct file *filp)
+static void i810_reclaim_buffers(drm_device_t * dev, struct file *filp)
 {
 	drm_device_dma_t *dma = dev->dma;
 	int i;
diff --git a/drivers/char/drm/i810_drv.h b/drivers/char/drm/i810_drv.h
index a18b80d91920..e8cf3ff606f0 100644
--- a/drivers/char/drm/i810_drv.h
+++ b/drivers/char/drm/i810_drv.h
@@ -113,8 +113,6 @@ typedef struct drm_i810_private {
 } drm_i810_private_t;
 
 				/* i810_dma.c */
-extern void i810_reclaim_buffers(drm_device_t * dev, struct file *filp);
-
 extern int i810_driver_dma_quiescent(drm_device_t * dev);
 extern void i810_driver_reclaim_buffers_locked(drm_device_t * dev,
 					       struct file *filp);
diff --git a/drivers/char/drm/i830_dma.c b/drivers/char/drm/i830_dma.c
index 4fea32aed6d2..163f2cbfe60d 100644
--- a/drivers/char/drm/i830_dma.c
+++ b/drivers/char/drm/i830_dma.c
@@ -1239,7 +1239,7 @@ static int i830_flush_queue(drm_device_t * dev)
 }
 
 /* Must be called with the lock held */
-void i830_reclaim_buffers(drm_device_t * dev, struct file *filp)
+static void i830_reclaim_buffers(drm_device_t * dev, struct file *filp)
 {
 	drm_device_dma_t *dma = dev->dma;
 	int i;
diff --git a/drivers/char/drm/i830_drv.h b/drivers/char/drm/i830_drv.h
index bf9075b576bd..85bc5be6f916 100644
--- a/drivers/char/drm/i830_drv.h
+++ b/drivers/char/drm/i830_drv.h
@@ -123,9 +123,6 @@ typedef struct drm_i830_private {
 extern drm_ioctl_desc_t i830_ioctls[];
 extern int i830_max_ioctl;
 
-/* i830_dma.c */
-extern void i830_reclaim_buffers(drm_device_t * dev, struct file *filp);
-
 /* i830_irq.c */
 extern int i830_irq_emit(struct inode *inode, struct file *filp,
 			 unsigned int cmd, unsigned long arg);
diff --git a/drivers/char/drm/i915_dma.c b/drivers/char/drm/i915_dma.c
index 9140703da1ba..1ff4c7ca0bff 100644
--- a/drivers/char/drm/i915_dma.c
+++ b/drivers/char/drm/i915_dma.c
@@ -344,18 +344,20 @@ static int i915_emit_cmds(drm_device_t * dev, int __user * buffer, int dwords)
 	int i;
 	RING_LOCALS;
 
+	if ((dwords+1) * sizeof(int) >= dev_priv->ring.Size - 8)
+		return DRM_ERR(EINVAL);
+
+	BEGIN_LP_RING(((dwords+1)&~1));
+
 	for (i = 0; i < dwords;) {
 		int cmd, sz;
 
 		if (DRM_COPY_FROM_USER_UNCHECKED(&cmd, &buffer[i], sizeof(cmd)))
 			return DRM_ERR(EINVAL);
 
-/* 		printk("%d/%d ", i, dwords); */
-
 		if ((sz = validate_cmd(cmd)) == 0 || i + sz > dwords)
 			return DRM_ERR(EINVAL);
 
-		BEGIN_LP_RING(sz);
 		OUT_RING(cmd);
 
 		while (++i, --sz) {
@@ -365,9 +367,13 @@ static int i915_emit_cmds(drm_device_t * dev, int __user * buffer, int dwords)
 			}
 			OUT_RING(cmd);
 		}
-		ADVANCE_LP_RING();
 	}
 
+	if (dwords & 1)
+		OUT_RING(0);
+
+	ADVANCE_LP_RING();
+
 	return 0;
 }
 
@@ -401,6 +407,21 @@ static int i915_emit_box(drm_device_t * dev,
 	return 0;
 }
 
+static void i915_emit_breadcrumb(drm_device_t *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	RING_LOCALS;
+
+	dev_priv->sarea_priv->last_enqueue = dev_priv->counter++;
+
+	BEGIN_LP_RING(4);
+	OUT_RING(CMD_STORE_DWORD_IDX);
+	OUT_RING(20);
+	OUT_RING(dev_priv->counter);
+	OUT_RING(0);
+	ADVANCE_LP_RING();
+}
+
 static int i915_dispatch_cmdbuffer(drm_device_t * dev,
 				   drm_i915_cmdbuffer_t * cmd)
 {
@@ -429,6 +450,7 @@ static int i915_dispatch_cmdbuffer(drm_device_t * dev,
 			return ret;
 	}
 
+	i915_emit_breadcrumb(dev);
 	return 0;
 }
 
@@ -475,12 +497,7 @@ static int i915_dispatch_batchbuffer(drm_device_t * dev,
 
 	dev_priv->sarea_priv->last_enqueue = dev_priv->counter++;
 
-	BEGIN_LP_RING(4);
-	OUT_RING(CMD_STORE_DWORD_IDX);
-	OUT_RING(20);
-	OUT_RING(dev_priv->counter);
-	OUT_RING(0);
-	ADVANCE_LP_RING();
+	i915_emit_breadcrumb(dev);
 
 	return 0;
 }
@@ -657,7 +674,7 @@ static int i915_getparam(DRM_IOCTL_ARGS)
 		value = READ_BREADCRUMB(dev_priv);
 		break;
 	default:
-		DRM_ERROR("Unkown parameter %d\n", param.param);
+		DRM_ERROR("Unknown parameter %d\n", param.param);
 		return DRM_ERR(EINVAL);
 	}
 
@@ -742,7 +759,8 @@ drm_ioctl_desc_t i915_ioctls[] = {
 	[DRM_IOCTL_NR(DRM_I915_ALLOC)] = {i915_mem_alloc, DRM_AUTH},
 	[DRM_IOCTL_NR(DRM_I915_FREE)] = {i915_mem_free, DRM_AUTH},
 	[DRM_IOCTL_NR(DRM_I915_INIT_HEAP)] = {i915_mem_init_heap, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
-	[DRM_IOCTL_NR(DRM_I915_CMDBUFFER)] = {i915_cmdbuffer, DRM_AUTH}
+	[DRM_IOCTL_NR(DRM_I915_CMDBUFFER)] = {i915_cmdbuffer, DRM_AUTH},
+	[DRM_IOCTL_NR(DRM_I915_DESTROY_HEAP)] = { i915_mem_destroy_heap, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY }
 };
 
 int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
diff --git a/drivers/char/drm/i915_drm.h b/drivers/char/drm/i915_drm.h
index 77412ddac007..4cb3da578330 100644
--- a/drivers/char/drm/i915_drm.h
+++ b/drivers/char/drm/i915_drm.h
@@ -74,6 +74,30 @@ typedef struct _drm_i915_sarea {
 	int pf_active;
 	int pf_current_page;	/* which buffer is being displayed? */
 	int perf_boxes;		/* performance boxes to be displayed */
+	int width, height;      /* screen size in pixels */
+
+	drm_handle_t front_handle;
+	int front_offset;
+	int front_size;
+
+	drm_handle_t back_handle;
+	int back_offset;
+	int back_size;
+
+	drm_handle_t depth_handle;
+	int depth_offset;
+	int depth_size;
+
+	drm_handle_t tex_handle;
+	int tex_offset;
+	int tex_size;
+	int log_tex_granularity;
+	int pitch;
+	int rotation;           /* 0, 90, 180 or 270 */
+	int rotated_offset;
+	int rotated_size;
+	int rotated_pitch;
+	int virtualX, virtualY;
 } drm_i915_sarea_t;
 
 /* Flags for perf_boxes
@@ -99,6 +123,7 @@ typedef struct _drm_i915_sarea {
 #define DRM_I915_FREE		0x09
 #define DRM_I915_INIT_HEAP	0x0a
 #define DRM_I915_CMDBUFFER	0x0b
+#define DRM_I915_DESTROY_HEAP	0x0c
 
 #define DRM_IOCTL_I915_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
 #define DRM_IOCTL_I915_FLUSH		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
@@ -112,6 +137,7 @@ typedef struct _drm_i915_sarea {
 #define DRM_IOCTL_I915_FREE             DRM_IOW( DRM_COMMAND_BASE + DRM_I915_FREE, drm_i915_mem_free_t)
 #define DRM_IOCTL_I915_INIT_HEAP        DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT_HEAP, drm_i915_mem_init_heap_t)
 #define DRM_IOCTL_I915_CMDBUFFER	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_CMDBUFFER, drm_i915_cmdbuffer_t)
+#define DRM_IOCTL_I915_DESTROY_HEAP	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_DESTROY_HEAP, drm_i915_mem_destroy_heap_t)
 
 /* Allow drivers to submit batchbuffers directly to hardware, relying
  * on the security mechanisms provided by hardware.
@@ -191,4 +217,11 @@ typedef struct drm_i915_mem_init_heap {
 	int start;
 } drm_i915_mem_init_heap_t;
 
+/* Allow memory manager to be torn down and re-initialized (eg on
+ * rotate):
+ */
+typedef struct drm_i915_mem_destroy_heap {
+	int region;
+} drm_i915_mem_destroy_heap_t;
+
 #endif				/* _I915_DRM_H_ */
diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h
index c6c71b45f101..7a65666899e4 100644
--- a/drivers/char/drm/i915_drv.h
+++ b/drivers/char/drm/i915_drv.h
@@ -37,16 +37,17 @@
 
 #define DRIVER_NAME		"i915"
 #define DRIVER_DESC		"Intel Graphics"
-#define DRIVER_DATE		"20051209"
+#define DRIVER_DATE		"20060119"
 
 /* Interface history:
  *
  * 1.1: Original.
  * 1.2: Add Power Management
  * 1.3: Add vblank support
+ * 1.4: Fix cmdbuffer path, add heap destroy
  */
 #define DRIVER_MAJOR		1
-#define DRIVER_MINOR		3
+#define DRIVER_MINOR		4
 #define DRIVER_PATCHLEVEL	0
 
 typedef struct _drm_i915_ring_buffer {
@@ -123,6 +124,7 @@ extern void i915_driver_irq_uninstall(drm_device_t * dev);
 extern int i915_mem_alloc(DRM_IOCTL_ARGS);
 extern int i915_mem_free(DRM_IOCTL_ARGS);
 extern int i915_mem_init_heap(DRM_IOCTL_ARGS);
+extern int i915_mem_destroy_heap(DRM_IOCTL_ARGS);
 extern void i915_mem_takedown(struct mem_block **heap);
 extern void i915_mem_release(drm_device_t * dev,
 			     DRMFILE filp, struct mem_block *heap);
diff --git a/drivers/char/drm/i915_mem.c b/drivers/char/drm/i915_mem.c
index ba87ff17ff64..52c67324df58 100644
--- a/drivers/char/drm/i915_mem.c
+++ b/drivers/char/drm/i915_mem.c
@@ -365,3 +365,34 @@ int i915_mem_init_heap(DRM_IOCTL_ARGS)
 
 	return init_heap(heap, initheap.start, initheap.size);
 }
+
+int i915_mem_destroy_heap( DRM_IOCTL_ARGS )
+{
+	DRM_DEVICE;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	drm_i915_mem_destroy_heap_t destroyheap;
+	struct mem_block **heap;
+
+	if ( !dev_priv ) {
+		DRM_ERROR( "%s called with no initialization\n", __FUNCTION__ );
+		return DRM_ERR(EINVAL);
+	}
+
+	DRM_COPY_FROM_USER_IOCTL( destroyheap, (drm_i915_mem_destroy_heap_t *)data,
+				  sizeof(destroyheap) );
+
+	heap = get_heap( dev_priv, destroyheap.region );
+	if (!heap) {
+		DRM_ERROR("get_heap failed");
+		return DRM_ERR(EFAULT);
+	}
+	
+	if (!*heap) {
+		DRM_ERROR("heap not initialized?");
+		return DRM_ERR(EFAULT);
+	}
+
+	i915_mem_takedown( heap );
+	return 0;
+}
+
diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c
index 915665c7fe7c..9bb8ae0c1c27 100644
--- a/drivers/char/drm/radeon_cp.c
+++ b/drivers/char/drm/radeon_cp.c
@@ -1640,7 +1640,7 @@ static int radeon_do_cleanup_cp(drm_device_t * dev)
 		if (dev_priv->gart_info.gart_table_location == DRM_ATI_GART_FB)
 		{
 			drm_core_ioremapfree(&dev_priv->gart_info.mapping, dev);
-			dev_priv->gart_info.addr = 0;
+			dev_priv->gart_info.addr = NULL;
 		}
 	}
 	/* only clear to the start of flags */
diff --git a/drivers/char/drm/savage_bci.c b/drivers/char/drm/savage_bci.c
index 0d426deeefec..59c7520bf9a2 100644
--- a/drivers/char/drm/savage_bci.c
+++ b/drivers/char/drm/savage_bci.c
@@ -32,6 +32,8 @@
 #define SAVAGE_EVENT_USEC_TIMEOUT	5000000	/* 5s */
 #define SAVAGE_FREELIST_DEBUG		0
 
+static int savage_do_cleanup_bci(drm_device_t *dev);
+
 static int
 savage_bci_wait_fifo_shadow(drm_savage_private_t * dev_priv, unsigned int n)
 {
@@ -895,7 +897,7 @@ static int savage_do_init_bci(drm_device_t * dev, drm_savage_init_t * init)
 	return 0;
 }
 
-int savage_do_cleanup_bci(drm_device_t * dev)
+static int savage_do_cleanup_bci(drm_device_t * dev)
 {
 	drm_savage_private_t *dev_priv = dev->dev_private;
 
diff --git a/drivers/char/drm/savage_drv.h b/drivers/char/drm/savage_drv.h
index dd46cb85439c..8f04b3d82292 100644
--- a/drivers/char/drm/savage_drv.h
+++ b/drivers/char/drm/savage_drv.h
@@ -212,7 +212,6 @@ extern int savage_driver_load(drm_device_t *dev, unsigned long chipset);
 extern int savage_driver_firstopen(drm_device_t *dev);
 extern void savage_driver_lastclose(drm_device_t *dev);
 extern int savage_driver_unload(drm_device_t *dev);
-extern int savage_do_cleanup_bci(drm_device_t * dev);
 extern void savage_reclaim_buffers(drm_device_t * dev, DRMFILE filp);
 
 /* state functions */
diff --git a/drivers/char/drm/via_dma.c b/drivers/char/drm/via_dma.c
index 593c0b8f650a..a691ae74129d 100644
--- a/drivers/char/drm/via_dma.c
+++ b/drivers/char/drm/via_dma.c
@@ -222,7 +222,7 @@ static int via_initialize(drm_device_t * dev,
 	return 0;
 }
 
-int via_dma_init(DRM_IOCTL_ARGS)
+static int via_dma_init(DRM_IOCTL_ARGS)
 {
 	DRM_DEVICE;
 	drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
@@ -321,7 +321,7 @@ int via_driver_dma_quiescent(drm_device_t * dev)
 	return 0;
 }
 
-int via_flush_ioctl(DRM_IOCTL_ARGS)
+static int via_flush_ioctl(DRM_IOCTL_ARGS)
 {
 	DRM_DEVICE;
 
@@ -330,7 +330,7 @@ int via_flush_ioctl(DRM_IOCTL_ARGS)
 	return via_driver_dma_quiescent(dev);
 }
 
-int via_cmdbuffer(DRM_IOCTL_ARGS)
+static int via_cmdbuffer(DRM_IOCTL_ARGS)
 {
 	DRM_DEVICE;
 	drm_via_cmdbuffer_t cmdbuf;
@@ -375,7 +375,7 @@ static int via_dispatch_pci_cmdbuffer(drm_device_t * dev,
 	return ret;
 }
 
-int via_pci_cmdbuffer(DRM_IOCTL_ARGS)
+static int via_pci_cmdbuffer(DRM_IOCTL_ARGS)
 {
 	DRM_DEVICE;
 	drm_via_cmdbuffer_t cmdbuf;
@@ -665,7 +665,7 @@ static void via_cmdbuf_reset(drm_via_private_t * dev_priv)
  * User interface to the space and lag functions.
  */
 
-int via_cmdbuf_size(DRM_IOCTL_ARGS)
+static int via_cmdbuf_size(DRM_IOCTL_ARGS)
 {
 	DRM_DEVICE;
 	drm_via_cmdbuf_size_t d_siz;
diff --git a/drivers/char/drm/via_dmablit.c b/drivers/char/drm/via_dmablit.c
index 9d5e027dae0e..b7f17457b424 100644
--- a/drivers/char/drm/via_dmablit.c
+++ b/drivers/char/drm/via_dmablit.c
@@ -108,7 +108,7 @@ via_map_blit_for_device(struct pci_dev *pdev,
 	int num_desc = 0;
 	int cur_line;
 	dma_addr_t next = 0 | VIA_DMA_DPR_EC;
-	drm_via_descriptor_t *desc_ptr = 0;
+	drm_via_descriptor_t *desc_ptr = NULL;
 
 	if (mode == 1) 
 		desc_ptr = vsg->desc_pages[cur_descriptor_page];
@@ -167,7 +167,7 @@ via_map_blit_for_device(struct pci_dev *pdev,
  */
 
 
-void
+static void
 via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg) 
 {
 	struct page *page;
@@ -581,7 +581,7 @@ via_build_sg_info(drm_device_t *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *
 	int ret = 0;
 	
 	vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
-	vsg->bounce_buffer = 0;
+	vsg->bounce_buffer = NULL;
 
 	vsg->state = dr_via_sg_init;
 
diff --git a/drivers/char/drm/via_drv.h b/drivers/char/drm/via_drv.h
index aad4f99f5405..52bcc7b1ba45 100644
--- a/drivers/char/drm/via_drv.h
+++ b/drivers/char/drm/via_drv.h
@@ -110,11 +110,6 @@ extern int via_mem_free(DRM_IOCTL_ARGS);
 extern int via_agp_init(DRM_IOCTL_ARGS);
 extern int via_map_init(DRM_IOCTL_ARGS);
 extern int via_decoder_futex(DRM_IOCTL_ARGS);
-extern int via_dma_init(DRM_IOCTL_ARGS);
-extern int via_cmdbuffer(DRM_IOCTL_ARGS);
-extern int via_flush_ioctl(DRM_IOCTL_ARGS);
-extern int via_pci_cmdbuffer(DRM_IOCTL_ARGS);
-extern int via_cmdbuf_size(DRM_IOCTL_ARGS);
 extern int via_wait_irq(DRM_IOCTL_ARGS);
 extern int via_dma_blit_sync( DRM_IOCTL_ARGS );
 extern int via_dma_blit( DRM_IOCTL_ARGS );
@@ -139,8 +134,6 @@ extern int via_driver_dma_quiescent(drm_device_t * dev);
 extern void via_init_futex(drm_via_private_t * dev_priv);
 extern void via_cleanup_futex(drm_via_private_t * dev_priv);
 extern void via_release_futex(drm_via_private_t * dev_priv, int context);
-extern int via_driver_irq_wait(drm_device_t * dev, unsigned int irq,
-			       int force_sequence, unsigned int *sequence);
 
 extern void via_dmablit_handler(drm_device_t *dev, int engine, int from_irq);
 extern void via_init_dmablit(drm_device_t *dev);
diff --git a/drivers/char/drm/via_irq.c b/drivers/char/drm/via_irq.c
index 56d7e3daea12..6152415644e9 100644
--- a/drivers/char/drm/via_irq.c
+++ b/drivers/char/drm/via_irq.c
@@ -190,7 +190,7 @@ int via_driver_vblank_wait(drm_device_t * dev, unsigned int *sequence)
 	return ret;
 }
 
-int
+static int
 via_driver_irq_wait(drm_device_t * dev, unsigned int irq, int force_sequence,
 		    unsigned int *sequence)
 {
diff --git a/drivers/char/esp.c b/drivers/char/esp.c
index 3f3ac039f4d9..57539d8f9f7c 100644
--- a/drivers/char/esp.c
+++ b/drivers/char/esp.c
@@ -359,7 +359,7 @@ static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
 		}
 	}
 
-	schedule_delayed_work(&tty->buf.work, 1);
+	tty_schedule_flip(tty);
 
 	info->stat_flags &= ~ESP_STAT_RX_TIMEOUT;
 	release_pio_buffer(pio_buf);
@@ -426,7 +426,7 @@ static inline void receive_chars_dma_done(struct esp_struct *info,
 			}
 			tty_insert_flip_char(tty, dma_buffer[num_bytes - 1], statflag);
 		}
-		schedule_delayed_work(&tty->buf.work, 1);
+		tty_schedule_flip(tty);
 	}
 
 	if (dma_bytes != num_bytes) {
diff --git a/drivers/char/ip2/i2cmd.c b/drivers/char/ip2/i2cmd.c
index cb8f4198e9a3..e7af647800b6 100644
--- a/drivers/char/ip2/i2cmd.c
+++ b/drivers/char/ip2/i2cmd.c
@@ -139,7 +139,6 @@ static UCHAR ct79[] = { 2, BYP,     0x4F,0                   }; // XMIT_NOW
 //static UCHAR ct86[]={ 2, BTH,     0x56,0                   }; // RCV_ENABLE
 static UCHAR ct87[] = { 1, BYP,     0x57                     }; // HW_TEST
 //static UCHAR ct88[]={ 3, BTH,     0x58,0,0                 }; // RCV_THRESHOLD
-static UCHAR ct89[]={ 1, BYP,     0x59                     }; // DSS_NOW
 //static UCHAR ct90[]={ 3, BYP,     0x5A,0,0                 }; // Set SILO
 //static UCHAR ct91[]={ 2, BYP,     0x5B,0                   }; // timed break
 
diff --git a/drivers/char/ip2main.c b/drivers/char/ip2main.c
index 56e93a5a1e24..48fcfba37bfa 100644
--- a/drivers/char/ip2main.c
+++ b/drivers/char/ip2main.c
@@ -2906,65 +2906,16 @@ ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg )
 		rc = -EINVAL;
 		break;
 	case 3:	    // Trace device
-		if ( cmd == 1 ) {
-			rc = put_user(iiSendPendingMail, pIndex++ );
-			rc = put_user(i2InitChannels, pIndex++ );
-			rc = put_user(i2QueueNeeds, pIndex++ );
-			rc = put_user(i2QueueCommands, pIndex++ );
-			rc = put_user(i2GetStatus, pIndex++ );
-			rc = put_user(i2Input, pIndex++ );
-			rc = put_user(i2InputFlush, pIndex++ );
-			rc = put_user(i2Output, pIndex++ );
-			rc = put_user(i2FlushOutput, pIndex++ );
-			rc = put_user(i2DrainWakeup, pIndex++ );
-			rc = put_user(i2DrainOutput, pIndex++ );
-			rc = put_user(i2OutputFree, pIndex++ );
-			rc = put_user(i2StripFifo, pIndex++ );
-			rc = put_user(i2StuffFifoBypass, pIndex++ );
-			rc = put_user(i2StuffFifoFlow, pIndex++ );
-			rc = put_user(i2StuffFifoInline, pIndex++ );
-			rc = put_user(i2ServiceBoard, pIndex++ );
-			rc = put_user(serviceOutgoingFifo, pIndex++ );
-			// rc = put_user(ip2_init, pIndex++ );
-			rc = put_user(ip2_init_board, pIndex++ );
-			rc = put_user(find_eisa_board, pIndex++ );
-			rc = put_user(set_irq, pIndex++ );
-			rc = put_user(ip2_interrupt, pIndex++ );
-			rc = put_user(ip2_poll, pIndex++ );
-			rc = put_user(service_all_boards, pIndex++ );
-			rc = put_user(do_input, pIndex++ );
-			rc = put_user(do_status, pIndex++ );
-#ifndef IP2DEBUG_OPEN
-			rc = put_user(0, pIndex++ );
-#else
-			rc = put_user(open_sanity_check, pIndex++ );
-#endif
-			rc = put_user(ip2_open, pIndex++ );
-			rc = put_user(ip2_close, pIndex++ );
-			rc = put_user(ip2_hangup, pIndex++ );
-			rc = put_user(ip2_write, pIndex++ );
-			rc = put_user(ip2_putchar, pIndex++ );
-			rc = put_user(ip2_flush_chars, pIndex++ );
-			rc = put_user(ip2_write_room, pIndex++ );
-			rc = put_user(ip2_chars_in_buf, pIndex++ );
-			rc = put_user(ip2_flush_buffer, pIndex++ );
-
-			//rc = put_user(ip2_wait_until_sent, pIndex++ );
-			rc = put_user(0, pIndex++ );
-
-			rc = put_user(ip2_throttle, pIndex++ );
-			rc = put_user(ip2_unthrottle, pIndex++ );
-			rc = put_user(ip2_ioctl, pIndex++ );
-			rc = put_user(0, pIndex++ );
-			rc = put_user(get_serial_info, pIndex++ );
-			rc = put_user(set_serial_info, pIndex++ );
-			rc = put_user(ip2_set_termios, pIndex++ );
-			rc = put_user(ip2_set_line_discipline, pIndex++ );
-			rc = put_user(set_params, pIndex++ );
-		} else {
+		/*
+		 * akpm: This used to write a whole bunch of function addresses
+		 * to userspace, which generated lots of put_user() warnings.
+		 * I killed it all.  Just return "success" and don't do
+		 * anything.
+		 */
+		if (cmd == 1)
+			rc = 0;
+		else
 			rc = -EINVAL;
-		}
-
 		break;
 
 	default:
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 0097f06fa67b..d745004281d0 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -481,7 +481,7 @@ int ipmi_validate_addr(struct ipmi_addr *addr, int len)
 	}
 
 	if ((addr->channel == IPMI_BMC_CHANNEL)
-	    || (addr->channel >= IPMI_NUM_CHANNELS)
+	    || (addr->channel >= IPMI_MAX_CHANNELS)
 	    || (addr->channel < 0))
 		return -EINVAL;
 
@@ -1321,7 +1321,7 @@ static int i_ipmi_request(ipmi_user_t          user,
 		unsigned char         ipmb_seq;
 		long                  seqid;
 
-		if (addr->channel >= IPMI_NUM_CHANNELS) {
+		if (addr->channel >= IPMI_MAX_CHANNELS) {
 			spin_lock_irqsave(&intf->counter_lock, flags);
 			intf->sent_invalid_commands++;
 			spin_unlock_irqrestore(&intf->counter_lock, flags);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 6ed213bd702c..e59b638766ef 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1270,36 +1270,36 @@ static int try_init_port(int intf_num, struct smi_info **new_info)
 	return 0;
 }
 
-static unsigned char mem_inb(struct si_sm_io *io, unsigned int offset)
+static unsigned char intf_mem_inb(struct si_sm_io *io, unsigned int offset)
 {
 	return readb((io->addr)+(offset * io->regspacing));
 }
 
-static void mem_outb(struct si_sm_io *io, unsigned int offset,
+static void intf_mem_outb(struct si_sm_io *io, unsigned int offset,
 		     unsigned char b)
 {
 	writeb(b, (io->addr)+(offset * io->regspacing));
 }
 
-static unsigned char mem_inw(struct si_sm_io *io, unsigned int offset)
+static unsigned char intf_mem_inw(struct si_sm_io *io, unsigned int offset)
 {
 	return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift)
 		&& 0xff;
 }
 
-static void mem_outw(struct si_sm_io *io, unsigned int offset,
+static void intf_mem_outw(struct si_sm_io *io, unsigned int offset,
 		     unsigned char b)
 {
 	writeb(b << io->regshift, (io->addr)+(offset * io->regspacing));
 }
 
-static unsigned char mem_inl(struct si_sm_io *io, unsigned int offset)
+static unsigned char intf_mem_inl(struct si_sm_io *io, unsigned int offset)
 {
 	return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift)
 		&& 0xff;
 }
 
-static void mem_outl(struct si_sm_io *io, unsigned int offset,
+static void intf_mem_outl(struct si_sm_io *io, unsigned int offset,
 		     unsigned char b)
 {
 	writel(b << io->regshift, (io->addr)+(offset * io->regspacing));
@@ -1349,16 +1349,16 @@ static int mem_setup(struct smi_info *info)
 	   upon the register size. */
 	switch (info->io.regsize) {
 	case 1:
-		info->io.inputb = mem_inb;
-		info->io.outputb = mem_outb;
+		info->io.inputb = intf_mem_inb;
+		info->io.outputb = intf_mem_outb;
 		break;
 	case 2:
-		info->io.inputb = mem_inw;
-		info->io.outputb = mem_outw;
+		info->io.inputb = intf_mem_inw;
+		info->io.outputb = intf_mem_outw;
 		break;
 	case 4:
-		info->io.inputb = mem_inl;
-		info->io.outputb = mem_outl;
+		info->io.inputb = intf_mem_inl;
+		info->io.outputb = intf_mem_outl;
 		break;
 #ifdef readq
 	case 8:
diff --git a/drivers/char/rio/cirrus.h b/drivers/char/rio/cirrus.h
index 217ff09f2fa1..89bd94eb45be 100644
--- a/drivers/char/rio/cirrus.h
+++ b/drivers/char/rio/cirrus.h
@@ -40,148 +40,6 @@
 #endif
 #define _cirrus_h 1
 
-#ifdef RTA
-#define	TO_UART	RX
-#define TO_DRIVER TX
-#endif
-
-#ifdef HOST
-#define	TO_UART	TX
-#define TO_DRIVER RX
-#endif
-#ifdef RTA
-/* Miscellaneous defines for CIRRUS addresses and related logic for
-   interrupts etc.
-*/
-#define	MAP(a)		((short *)(cirrus_base + (a)))
-#define outp(a,b)	(*MAP (a) =(b))
-#define inp(a)		((*MAP (a)) & 0xff)
-#define	CIRRUS_FIRST	(short*)0x7300
-#define	CIRRUS_SECOND	(short*)0x7200
-#define	CIRRUS_THIRD	(short*)0x7100
-#define	CIRRUS_FOURTH	(short*)0x7000
-#define	PORTS_ON_CIRRUS	4
-#define	CIRRUS_FIFO_SIZE	12
-#define	SPACE		0x20
-#define	TAB		0x09
-#define	LINE_FEED	0x0a
-#define	CARRIAGE_RETURN	0x0d
-#define	BACKSPACE	0x08
-#define	SPACES_IN_TABS	8
-#define	SEND_ESCAPE	0x00
-#define START_BREAK	0x81
-#define	TIMER_TICK	0x82
-#define STOP_BREAK	0x83
-#define BASE(a) ((a) < 4 ? (short*)CIRRUS_FIRST : ((a) < 8 ? (short *)CIRRUS_SECOND : ((a) < 12 ? (short*)CIRRUS_THIRD : (short *)CIRRUS_FOURTH)))
-#define txack1	((short *)0x7104)
-#define rxack1	((short *)0x7102)
-#define mdack1  ((short *)0x7106)
-#define txack2  ((short *)0x7006)
-#define rxack2	((short *)0x7004)
-#define mdack2  ((short *)0x7100)
-#define int_latch       ((short *) 0x7800)
-#define int_status      ((short *) 0x7c00)
-#define tx1_pending     0x20
-#define rx1_pending     0x10
-#define md1_pending     0x40
-#define tx2_pending     0x02
-#define rx2_pending     0x01
-#define md2_pending     0x40
-#define module1_bits	0x07
-#define module1_modern	0x08
-#define module2_bits	0x70
-#define module2_modern	0x80
-#define module_blank	0xf
-#define rs232_d25	0x0
-#define	rs232_rj45	0x1
-#define rs422_d25	0x3
-#define parallel	0x5
-
-#define	CLK0	0x00
-#define CLK1	0x01
-#define CLK2	0x02
-#define CLK3	0x03
-#define CLK4	0x04
-
-#define CIRRUS_REVC    0x42
-#define CIRRUS_REVE    0x44
-
-#define	TURNON	1
-#define TURNOFF 0
-
-/* The list of CIRRUS registers. 
-   NB. These registers are relative values on 8 bit boundaries whereas
-   on the RTA's the CIRRUS registers are on word boundaries. Use pointer
-   arithmetic (short *) to obtain the real addresses required */
-#define ccr	0x05		/* Channel Command Register     */
-#define ier	0x06		/* Interrupt Enable Register    */
-#define cor1	0x08		/* Channel Option Register 1    */
-#define cor2	0x09		/* Channel Option Register 2    */
-#define cor3	0x0a		/* Channel Option Register 3    */
-#define cor4	0x1e		/* Channel Option Register 4    */
-#define	cor5	0x1f		/* Channel Option Register 5    */
-
-#define ccsr	0x0b		/* Channel Control Status Register */
-#define rdcr	0x0e		/* Receive Data Count Register  */
-#define tdcr	0x12		/* Transmit Data Count Register */
-#define mcor1	0x15		/* Modem Change Option Register 1 */
-#define mcor2	0x16		/* Modem Change Option Regsiter 2 */
-
-#define livr	0x18		/* Local Interrupt Vector Register */
-#define schr1	0x1a		/* Special Character Register 1 */
-#define schr2	0x1b		/* Special Character Register 2 */
-#define schr3	0x1c		/* Special Character Register 3 */
-#define schr4	0x1d		/* Special Character Register 4 */
-
-#define rtr	0x20		/* Receive Timer Register */
-#define rtpr	0x21		/* Receive Timeout Period Register */
-#define lnc	0x24		/* Lnext character */
-
-#define rivr	0x43		/* Receive Interrupt Vector Register    */
-#define tivr	0x42		/* Transmit Interrupt Vector Register   */
-#define mivr	0x41		/* Modem Interrupt Vector Register      */
-#define gfrcr	0x40		/* Global Firmware Revision code Reg    */
-#define ricr	0x44		/* Receive Interrupting Channel Reg     */
-#define ticr	0x45		/* Transmit Interrupting Channel Reg    */
-#define micr	0x46		/* Modem Interrupting Channel Register  */
-
-#define gcr	0x4b		/* Global configuration register */
-#define misr    0x4c		/* Modem interrupt status register */
-
-#define rbusr	0x59
-#define tbusr	0x5a
-#define mbusr	0x5b
-
-#define eoir	0x60		/* End Of Interrupt Register */
-#define rdsr	0x62		/* Receive Data / Status Register */
-#define tdr	0x63		/* Transmit Data Register */
-#define svrr	0x67		/* Service Request Register */
-
-#define car	0x68		/* Channel Access Register */
-#define mir	0x69		/* Modem Interrupt Register */
-#define tir	0x6a		/* Transmit Interrupt Register */
-#define rir	0x6b		/* Receive Interrupt Register */
-#define msvr1	0x6c		/* Modem Signal Value Register 1 */
-#define msvr2	0x6d		/* Modem Signal Value Register 2 */
-#define psvr	0x6f		/* Printer Signal Value Register */
-
-#define tbpr	0x72		/* Transmit Baud Rate Period Register */
-#define tcor	0x76		/* Transmit Clock Option Register */
-
-#define rbpr	0x78		/* Receive Baud Rate Period Register */
-#define rber	0x7a		/* Receive Baud Rate Extension Register */
-#define rcor	0x7c		/* Receive Clock Option Register */
-#define ppr	0x7e		/* Prescalar Period Register    */
-
-/* Misc registers used for forcing the 1400 out of its reset woes */
-#define airl	0x6d
-#define airm	0x6e
-#define airh	0x6f
-#define btcr	0x66
-#define mtcr	0x6c
-#define tber	0x74
-
-#endif				/* #ifdef RTA */
 
 
 /* Bit fields for particular registers */
diff --git a/drivers/char/rio/defaults.h b/drivers/char/rio/defaults.h
index 5b600c32ac02..d55c2f6a9877 100644
--- a/drivers/char/rio/defaults.h
+++ b/drivers/char/rio/defaults.h
@@ -45,13 +45,6 @@ static char *_rio_defaults_h_sccs = "@(#)defaults.h	1.1";
 #define MILLISECOND           (int) (1000/64)	/* 15.625 low ticks */
 #define SECOND                (int) 15625	/* Low priority ticks */
 
-#ifdef RTA
-#define RX_LIMIT       (ushort) 3
-#endif
-#ifdef HOST
-#define RX_LIMIT       (ushort) 1
-#endif
-
 #define LINK_TIMEOUT          (int) (POLL_PERIOD / 2)
 
 
diff --git a/drivers/char/rio/link.h b/drivers/char/rio/link.h
index bfba5b0c033e..48d68ca7f825 100644
--- a/drivers/char/rio/link.h
+++ b/drivers/char/rio/link.h
@@ -102,30 +102,14 @@
 /*
 ** LED stuff
 */
-#if defined(RTA)
-#define LED_OFF            ((ushort) 0)	/* LED off */
-#define LED_RED            ((ushort) 1)	/* LED Red */
-#define LED_GREEN          ((ushort) 2)	/* LED Green */
-#define LED_ORANGE         ((ushort) 4)	/* LED Orange */
-#define LED_1TO8_OPEN      ((ushort) 1)	/* Port 1->8 LED on */
-#define LED_9TO16_OPEN     ((ushort) 2)	/* Port 9->16 LED on */
-#define LED_SET_COLOUR(colour)	(link->led = (colour))
-#define LED_OR_COLOUR(colour)	(link->led |= (colour))
-#define LED_TIMEOUT(time)    (link->led_timeout = RioTimePlus(RioTime(),(time)))
-#else
 #define LED_SET_COLOUR(colour)
 #define LED_OR_COLOUR(colour)
 #define LED_TIMEOUT(time)
-#endif				/* RTA */
 
 struct LPB {
 	WORD link_number;	/* Link Number */
 	Channel_ptr in_ch;	/* Link In Channel */
 	Channel_ptr out_ch;	/* Link Out Channel */
-#ifdef RTA
-	uchar stat_led;		/* Port open leds */
-	uchar led;		/* True, light led! */
-#endif
 	BYTE attached_serial[4];	/* Attached serial number */
 	BYTE attached_host_serial[4];
 	/* Serial number of Host who
@@ -144,30 +128,12 @@ struct LPB {
 	WORD WaitNoBoot;	/* Secs to hold off booting */
 	PKT_ptr add_packet_list;	/* Add packets to here */
 	PKT_ptr remove_packet_list;	/* Send packets from here */
-#ifdef RTA
-#ifdef DCIRRUS
-#define    QBUFS_PER_REDIRECT (4 / PKTS_PER_BUFFER + 1)
-#else
-#define    QBUFS_PER_REDIRECT (8 / PKTS_PER_BUFFER + 1)
-#endif
-	PKT_ptr_ptr rd_add;	/* Add a new Packet here */
-	Q_BUF_ptr rd_add_qb;	/* Pointer to the add Q buf */
-	PKT_ptr_ptr rd_add_st_qbb;	/* Pointer to start of the Q's buf */
-	PKT_ptr_ptr rd_add_end_qbb;	/* Pointer to the end of the Q's buf */
-	PKT_ptr_ptr rd_remove;	/* Remove a Packet here */
-	Q_BUF_ptr rd_remove_qb;	/* Pointer to the remove Q buf */
-	PKT_ptr_ptr rd_remove_st_qbb;	/* Pointer to the start of the Q buf */
-	PKT_ptr_ptr rd_remove_end_qbb;	/* Pointer to the end of the Q buf */
-	ushort pkts_in_q;	/* Packets in queue */
-#endif
 
 	Channel_ptr lrt_fail_chan;	/* Lrt's failure channel */
 	Channel_ptr ltt_fail_chan;	/* Ltt's failure channel */
 
-#if defined (HOST) || defined (INKERNEL)
 	/* RUP structure for HOST to driver communications */
 	struct RUP rup;
-#endif
 	struct RUP link_rup;	/* RUP for the link (POLL,
 				   topology etc.) */
 	WORD attached_link;	/* Number of attached link */
diff --git a/drivers/char/rio/list.h b/drivers/char/rio/list.h
index 36aad4c9cb3a..79b853140ae5 100644
--- a/drivers/char/rio/list.h
+++ b/drivers/char/rio/list.h
@@ -44,8 +44,6 @@ static char *_rio_list_h_sccs = "@(#)list.h	1.9";
 
 #define PKT_IN_USE    0x1
 
-#ifdef INKERNEL
-
 #define ZERO_PTR (ushort) 0x8000
 #define	CaD	PortP->Caddr
 
@@ -54,143 +52,5 @@ static char *_rio_list_h_sccs = "@(#)list.h	1.9";
 ** to by the TxAdd pointer has PKT_IN_USE clear in its address.
 */
 
-#ifndef linux
-#if defined( MIPS ) && !defined( MIPSEISA )
-/* May the shoes of the Devil dance on your grave for creating this */
-#define   can_add_transmit(PacketP,PortP) \
-          (!((uint)(PacketP = (struct PKT *)RIO_PTR(CaD,RINDW(PortP->TxAdd))) \
-          & (PKT_IN_USE<<2)))
-
-#elif  defined(MIPSEISA) || defined(nx6000) || \
-       defined(drs6000)  || defined(UWsparc)
-
-#define   can_add_transmit(PacketP,PortP) \
-          (!((uint)(PacketP = (struct PKT *)RIO_PTR(CaD,RINDW(PortP->TxAdd))) \
-	  & PKT_IN_USE))
-
-#else
-#define   can_add_transmit(PacketP,PortP) \
-          (!((uint)(PacketP = (struct PKT *)RIO_PTR(CaD,*PortP->TxAdd)) \
-	  & PKT_IN_USE))
-#endif
-
-/*
-** To add a packet to the queue, you set the PKT_IN_USE bit in the address,
-** and then move the TxAdd pointer along one position to point to the next
-** packet pointer. You must wrap the pointer from the end back to the start.
-*/
-#if defined(MIPS) || defined(nx6000) || defined(drs6000) || defined(UWsparc)
-#   define add_transmit(PortP)  \
-	WINDW(PortP->TxAdd,RINDW(PortP->TxAdd) | PKT_IN_USE);\
-	if (PortP->TxAdd == PortP->TxEnd)\
-	    PortP->TxAdd = PortP->TxStart;\
-	else\
-	    PortP->TxAdd++;\
-	WWORD(PortP->PhbP->tx_add , RIO_OFF(CaD,PortP->TxAdd));
-#elif defined(AIX)
-#   define add_transmit(PortP)  \
-	{\
-	    register ushort *TxAddP = (ushort *)RIO_PTR(Cad,PortP->TxAddO);\
-	    WINDW( TxAddP, RINDW( TxAddP ) | PKT_IN_USE );\
-	    if (PortP->TxAddO == PortP->TxEndO )\
-		PortP->TxAddO = PortP->TxStartO;\
-	    else\
-		PortP->TxAddO += sizeof(ushort);\
-	    WWORD(((PHB *)RIO_PTR(Cad,PortP->PhbO))->tx_add , PortP->TxAddO );\
-	}
-#else
-#   define add_transmit(PortP)  \
-	*PortP->TxAdd |= PKT_IN_USE;\
-	if (PortP->TxAdd == PortP->TxEnd)\
-	    PortP->TxAdd = PortP->TxStart;\
-	else\
-	    PortP->TxAdd++;\
-	PortP->PhbP->tx_add = RIO_OFF(CaD,PortP->TxAdd);
-#endif
-
-/*
-** can_remove_receive( PacketP, PortP ) returns non-zero if PKT_IN_USE is set
-** for the next packet on the queue. It will also set PacketP to point to the
-** relevant packet, [having cleared the PKT_IN_USE bit]. If PKT_IN_USE is clear,
-** then can_remove_receive() returns 0.
-*/
-#if defined(MIPS) || defined(nx6000) || defined(drs6000) || defined(UWsparc)
-#   define can_remove_receive(PacketP,PortP) \
-	((RINDW(PortP->RxRemove) & PKT_IN_USE) ? \
-	(PacketP=(struct PKT *)RIO_PTR(CaD,(RINDW(PortP->RxRemove) & ~PKT_IN_USE))):0)
-#elif defined(AIX)
-#   define can_remove_receive(PacketP,PortP) \
-	((RINDW((ushort *)RIO_PTR(Cad,PortP->RxRemoveO)) & PKT_IN_USE) ? \
-	(PacketP=(struct PKT *)RIO_PTR(Cad,RINDW((ushort *)RIO_PTR(Cad,PortP->RxRemoveO)) & ~PKT_IN_USE)):0)
-#else
-#   define can_remove_receive(PacketP,PortP) \
-	((*PortP->RxRemove & PKT_IN_USE) ? \
-	(PacketP=(struct PKT *)RIO_PTR(CaD,(*PortP->RxRemove & ~PKT_IN_USE))):0)
-#endif
-
-
-/*
-** Will God see it within his heart to forgive us for this thing that
-** we have created? To remove a packet from the receive queue you clear
-** its PKT_IN_USE bit, and then bump the pointers. Once the pointers
-** get to the end, they must be wrapped back to the start.
-*/
-#if defined(MIPS) || defined(nx6000) || defined(drs6000) || defined(UWsparc)
-#   define remove_receive(PortP) \
-	WINDW(PortP->RxRemove, (RINDW(PortP->RxRemove) & ~PKT_IN_USE));\
-	if (PortP->RxRemove == PortP->RxEnd)\
-	    PortP->RxRemove = PortP->RxStart;\
-	else\
-	    PortP->RxRemove++;\
-	WWORD(PortP->PhbP->rx_remove , RIO_OFF(CaD,PortP->RxRemove));
-#elif defined(AIX)
-#   define remove_receive(PortP) \
-    {\
-        register ushort *RxRemoveP = (ushort *)RIO_PTR(Cad,PortP->RxRemoveO);\
-        WINDW( RxRemoveP, RINDW( RxRemoveP ) & ~PKT_IN_USE );\
-        if (PortP->RxRemoveO == PortP->RxEndO)\
-            PortP->RxRemoveO = PortP->RxStartO;\
-        else\
-            PortP->RxRemoveO += sizeof(ushort);\
-        WWORD(((PHB *)RIO_PTR(Cad,PortP->PhbO))->rx_remove, PortP->RxRemoveO );\
-    }
-#else
-#   define remove_receive(PortP) \
-	*PortP->RxRemove &= ~PKT_IN_USE;\
-	if (PortP->RxRemove == PortP->RxEnd)\
-	    PortP->RxRemove = PortP->RxStart;\
-	else\
-	    PortP->RxRemove++;\
-	PortP->PhbP->rx_remove = RIO_OFF(CaD,PortP->RxRemove);
-#endif
-#endif
-
-
-#else				/* !IN_KERNEL */
-
-#define ZERO_PTR NULL
-
-
-#ifdef HOST
-/* #define can_remove_transmit(pkt,phb) ((((char*)pkt = (*(char**)(phb->tx_remove))-1) || 1)) && (*phb->u3.s2.tx_remove_ptr & PKT_IN_USE))   */
-#define remove_transmit(phb) *phb->u3.s2.tx_remove_ptr &= ~(ushort)PKT_IN_USE;\
-                             if (phb->tx_remove == phb->tx_end)\
-                                phb->tx_remove = phb->tx_start;\
-                             else\
-                                phb->tx_remove++;
-#define can_add_receive(phb) !(*phb->u4.s2.rx_add_ptr & PKT_IN_USE)
-#define add_receive(pkt,phb) *phb->rx_add = pkt;\
-                             *phb->u4.s2.rx_add_ptr |= PKT_IN_USE;\
-                             if (phb->rx_add == phb->rx_end)\
-                                phb->rx_add = phb->rx_start;\
-                             else\
-                                phb->rx_add++;
-#endif
-#endif
-
-#ifdef RTA
-#define splx(oldspl)    if ((oldspl) == 0) spl0()
-#endif
-
 #endif				/* ifndef _list.h */
 /*********** end of file ***********/
diff --git a/drivers/char/rio/parmmap.h b/drivers/char/rio/parmmap.h
index fe4e00567065..e24acc1d1844 100644
--- a/drivers/char/rio/parmmap.h
+++ b/drivers/char/rio/parmmap.h
@@ -78,14 +78,9 @@ struct PARM_MAP {
 	WORD idle_count;	/* Idle time counter */
 	WORD busy_count;	/* Busy counter */
 	WORD idle_control;	/* Control Idle Process */
-#if defined(HOST) || defined(INKERNEL)
 	WORD tx_intr;		/* TX interrupt pending */
 	WORD rx_intr;		/* RX interrupt pending */
 	WORD rup_intr;		/* RUP interrupt pending */
-#endif
-#if defined(RTA)
-	WORD dying_count;	/* Count of processes dead */
-#endif
 };
 
 #endif
diff --git a/drivers/char/rio/phb.h b/drivers/char/rio/phb.h
index 3baebf8513af..2663ca0306e2 100644
--- a/drivers/char/rio/phb.h
+++ b/drivers/char/rio/phb.h
@@ -44,17 +44,6 @@
 #endif
 
 
- /*************************************************
-  * Set the LIMIT values.
-  ************************************************/
-#ifdef RTA
-#define RX_LIMIT       (ushort) 3
-#endif
-#ifdef HOST
-#define RX_LIMIT       (ushort) 1
-#endif
-
-
 /*************************************************
  * Handshake asserted. Deasserted by the LTT(s)
  ************************************************/
@@ -69,11 +58,7 @@
 /*************************************************
  * Maximum number of PHB's
  ************************************************/
-#if defined (HOST) || defined (INKERNEL)
 #define MAX_PHB               ((ushort) 128)	/* range 0-127 */
-#else
-#define MAX_PHB               ((ushort) 8)	/* range 0-7 */
-#endif
 
 /*************************************************
  * Defines for the mode fields
@@ -139,141 +124,23 @@
  * the start. The pointer tx_add points to a SPACE to put a Packet.
  * The pointer tx_remove points to the next Packet to remove
  *************************************************************************/
-#ifndef INKERNEL
-#define src_unit     u2.s2.unit
-#define src_port     u2.s2.port
-#define dest_unit    u1.s1.unit
-#define dest_port    u1.s1.port
-#endif
-#ifdef HOST
-#define tx_start     u3.s1.tx_start_ptr_ptr
-#define tx_add       u3.s1.tx_add_ptr_ptr
-#define tx_end       u3.s1.tx_end_ptr_ptr
-#define tx_remove    u3.s1.tx_remove_ptr_ptr
-#define rx_start     u4.s1.rx_start_ptr_ptr
-#define rx_add       u4.s1.rx_add_ptr_ptr
-#define rx_end       u4.s1.rx_end_ptr_ptr
-#define rx_remove    u4.s1.rx_remove_ptr_ptr
-#endif
 typedef struct PHB PHB;
 struct PHB {
-#ifdef RTA
-	ushort port;
-#endif
-#ifdef INKERNEL
 	WORD source;
-#else
-	union {
-		ushort source;	/* Complete source */
-		struct {
-			unsigned char unit;	/* Source unit */
-			unsigned char port;	/* Source port */
-		} s2;
-	} u2;
-#endif
 	WORD handshake;
 	WORD status;
 	NUMBER timeout;		/* Maximum of 1.9 seconds */
 	WORD link;		/* Send down this link */
-#ifdef INKERNEL
 	WORD destination;
-#else
-	union {
-		ushort destination;	/* Complete destination */
-		struct {
-			unsigned char unit;	/* Destination unit */
-			unsigned char port;	/* Destination port */
-		} s1;
-	} u1;
-#endif
-#ifdef RTA
-	ushort tx_pkts_added;
-	ushort tx_pkts_removed;
-	Q_BUF_ptr tx_q_start;	/* Start of the Q list chain */
-	short num_tx_q_bufs;	/* Number of Q buffers in the chain */
-	PKT_ptr_ptr tx_add;	/* Add a new Packet here */
-	Q_BUF_ptr tx_add_qb;	/* Pointer to the add Q buf */
-	PKT_ptr_ptr tx_add_st_qbb;	/* Pointer to start of the Q's buf */
-	PKT_ptr_ptr tx_add_end_qbb;	/* Pointer to the end of the Q's buf */
-	PKT_ptr_ptr tx_remove;	/* Remove a Packet here */
-	Q_BUF_ptr tx_remove_qb;	/* Pointer to the remove Q buf */
-	PKT_ptr_ptr tx_remove_st_qbb;	/* Pointer to the start of the Q buf */
-	PKT_ptr_ptr tx_remove_end_qbb;	/* Pointer to the end of the Q buf */
-#endif
-#ifdef INKERNEL
 	PKT_ptr_ptr tx_start;
 	PKT_ptr_ptr tx_end;
 	PKT_ptr_ptr tx_add;
 	PKT_ptr_ptr tx_remove;
-#endif
-#ifdef HOST
-	union {
-		struct {
-			PKT_ptr_ptr tx_start_ptr_ptr;
-			PKT_ptr_ptr tx_end_ptr_ptr;
-			PKT_ptr_ptr tx_add_ptr_ptr;
-			PKT_ptr_ptr tx_remove_ptr_ptr;
-		} s1;
-		struct {
-			ushort *tx_start_ptr;
-			ushort *tx_end_ptr;
-			ushort *tx_add_ptr;
-			ushort *tx_remove_ptr;
-		} s2;
-	} u3;
-#endif
 
-#ifdef  RTA
-	ushort rx_pkts_added;
-	ushort rx_pkts_removed;
-	Q_BUF_ptr rx_q_start;	/* Start of the Q list chain */
-	short num_rx_q_bufs;	/* Number of Q buffers in the chain */
-	PKT_ptr_ptr rx_add;	/* Add a new Packet here */
-	Q_BUF_ptr rx_add_qb;	/* Pointer to the add Q buf */
-	PKT_ptr_ptr rx_add_st_qbb;	/* Pointer to start of the Q's buf */
-	PKT_ptr_ptr rx_add_end_qbb;	/* Pointer to the end of the Q's buf */
-	PKT_ptr_ptr rx_remove;	/* Remove a Packet here */
-	Q_BUF_ptr rx_remove_qb;	/* Pointer to the remove Q buf */
-	PKT_ptr_ptr rx_remove_st_qbb;	/* Pointer to the start of the Q buf */
-	PKT_ptr_ptr rx_remove_end_qbb;	/* Pointer to the end of the Q buf */
-#endif
-#ifdef INKERNEL
 	PKT_ptr_ptr rx_start;
 	PKT_ptr_ptr rx_end;
 	PKT_ptr_ptr rx_add;
 	PKT_ptr_ptr rx_remove;
-#endif
-#ifdef HOST
-	union {
-		struct {
-			PKT_ptr_ptr rx_start_ptr_ptr;
-			PKT_ptr_ptr rx_end_ptr_ptr;
-			PKT_ptr_ptr rx_add_ptr_ptr;
-			PKT_ptr_ptr rx_remove_ptr_ptr;
-		} s1;
-		struct {
-			ushort *rx_start_ptr;
-			ushort *rx_end_ptr;
-			ushort *rx_add_ptr;
-			ushort *rx_remove_ptr;
-		} s2;
-	} u4;
-#endif
-
-#ifdef RTA			/* some fields for the remotes */
-	ushort flush_count;	/* Count of write flushes */
-	ushort txmode;		/* Modes for tx */
-	ushort rxmode;		/* Modes for rx */
-	ushort portmode;	/* Generic modes */
-	ushort column;		/* TAB3 column count */
-	ushort tx_subscript;	/* (TX) Subscript into data field */
-	ushort rx_subscript;	/* (RX) Subscript into data field */
-	PKT_ptr rx_incomplete;	/* Hold an incomplete packet here */
-	ushort modem_bits;	/* Modem bits to mask */
-	ushort lastModem;	/* Modem control lines. */
-	ushort addr;		/* Address for sub commands */
-	ushort MonitorTstate;	/* TRUE if monitoring tstop */
-#endif
 
 };
 
diff --git a/drivers/char/rio/pkt.h b/drivers/char/rio/pkt.h
index 882fd429ac2e..7011e52e82db 100644
--- a/drivers/char/rio/pkt.h
+++ b/drivers/char/rio/pkt.h
@@ -70,39 +70,12 @@
 #define CONTROL_DATA_WNDW  (DATA_WNDW << 8)
 
 struct PKT {
-#ifdef INKERNEL
 	BYTE dest_unit;		/* Destination Unit Id */
 	BYTE dest_port;		/* Destination POrt */
 	BYTE src_unit;		/* Source Unit Id */
 	BYTE src_port;		/* Source POrt */
-#else
-	union {
-		ushort destination;	/* Complete destination */
-		struct {
-			unsigned char unit;	/* Destination unit */
-			unsigned char port;	/* Destination port */
-		} s1;
-	} u1;
-	union {
-		ushort source;	/* Complete source */
-		struct {
-			unsigned char unit;	/* Source unit */
-			unsigned char port;	/* Source port */
-		} s2;
-	} u2;
-#endif
-#ifdef INKERNEL
 	BYTE len;
 	BYTE control;
-#else
-	union {
-		ushort control;
-		struct {
-			unsigned char len;
-			unsigned char control;
-		} s3;
-	} u3;
-#endif
 	BYTE data[PKT_MAX_DATA_LEN];
 	/* Actual data :-) */
 	WORD csum;		/* C-SUM */
diff --git a/drivers/char/rio/qbuf.h b/drivers/char/rio/qbuf.h
index acd9e8e5307d..391ffc335535 100644
--- a/drivers/char/rio/qbuf.h
+++ b/drivers/char/rio/qbuf.h
@@ -46,11 +46,7 @@ static char *_rio_qbuf_h_sccs = "@(#)qbuf.h	1.1";
 
 
 
-#ifdef HOST
-#define PKTS_PER_BUFFER    1
-#else
 #define PKTS_PER_BUFFER    (220 / PKT_LENGTH)
-#endif
 
 typedef struct Q_BUF Q_BUF;
 struct Q_BUF {
diff --git a/drivers/char/rio/riotypes.h b/drivers/char/rio/riotypes.h
index 9b67e2468bec..46084d5c7e98 100644
--- a/drivers/char/rio/riotypes.h
+++ b/drivers/char/rio/riotypes.h
@@ -43,9 +43,6 @@
 #endif
 #endif
 
-#ifdef INKERNEL
-
-#if !defined(MIPSAT)
 typedef unsigned short NUMBER_ptr;
 typedef unsigned short WORD_ptr;
 typedef unsigned short BYTE_ptr;
@@ -65,69 +62,6 @@ typedef unsigned short RUP_ptr;
 typedef unsigned short short_ptr;
 typedef unsigned short u_short_ptr;
 typedef unsigned short ushort_ptr;
-#else
-/* MIPSAT types */
-typedef char RIO_POINTER[8];
-typedef RIO_POINTER NUMBER_ptr;
-typedef RIO_POINTER WORD_ptr;
-typedef RIO_POINTER BYTE_ptr;
-typedef RIO_POINTER char_ptr;
-typedef RIO_POINTER Channel_ptr;
-typedef RIO_POINTER FREE_LIST_ptr_ptr;
-typedef RIO_POINTER FREE_LIST_ptr;
-typedef RIO_POINTER LPB_ptr;
-typedef RIO_POINTER Process_ptr;
-typedef RIO_POINTER PHB_ptr;
-typedef RIO_POINTER PKT_ptr;
-typedef RIO_POINTER PKT_ptr_ptr;
-typedef RIO_POINTER Q_BUF_ptr;
-typedef RIO_POINTER Q_BUF_ptr_ptr;
-typedef RIO_POINTER ROUTE_STR_ptr;
-typedef RIO_POINTER RUP_ptr;
-typedef RIO_POINTER short_ptr;
-typedef RIO_POINTER u_short_ptr;
-typedef RIO_POINTER ushort_ptr;
-#endif
-
-#else				/* not INKERNEL */
-typedef unsigned char BYTE;
-typedef unsigned short WORD;
-typedef unsigned long DWORD;
-typedef short NUMBER;
-typedef short *NUMBER_ptr;
-typedef unsigned short *WORD_ptr;
-typedef unsigned char *BYTE_ptr;
-typedef unsigned char uchar;
-typedef unsigned short ushort;
-typedef unsigned int uint;
-typedef unsigned long ulong;
-typedef unsigned char u_char;
-typedef unsigned short u_short;
-typedef unsigned int u_int;
-typedef unsigned long u_long;
-typedef unsigned short ERROR;
-typedef unsigned long ID;
-typedef char *char_ptr;
-typedef Channel *Channel_ptr;
-typedef struct FREE_LIST *FREE_LIST_ptr;
-typedef struct FREE_LIST **FREE_LIST_ptr_ptr;
-typedef struct LPB *LPB_ptr;
-typedef struct Process *Process_ptr;
-typedef struct PHB *PHB_ptr;
-typedef struct PKT *PKT_ptr;
-typedef struct PKT **PKT_ptr_ptr;
-typedef struct Q_BUF *Q_BUF_ptr;
-typedef struct Q_BUF **Q_BUF_ptr_ptr;
-typedef struct ROUTE_STR *ROUTE_STR_ptr;
-typedef struct RUP *RUP_ptr;
-typedef short *short_ptr;
-typedef u_short *u_short_ptr;
-typedef ushort *ushort_ptr;
-typedef struct PKT PKT;
-typedef struct LPB LPB;
-typedef struct RUP RUP;
-#endif
-
 
 #endif				/* __riotypes__ */
 
diff --git a/drivers/char/rio/rup.h b/drivers/char/rio/rup.h
index 8d44fec91dd5..f74f67c6f702 100644
--- a/drivers/char/rio/rup.h
+++ b/drivers/char/rio/rup.h
@@ -43,12 +43,7 @@
 #endif
 #endif
 
-#if defined( HOST ) || defined( INKERNEL )
 #define MAX_RUP          ((short) 16)
-#endif
-#ifdef RTA
-#define MAX_RUP          ((short) 1)
-#endif
 
 #define PKTS_PER_RUP     ((short) 2)	/* They are always used in pairs */
 
diff --git a/drivers/char/rio/sam.h b/drivers/char/rio/sam.h
index 31494054b213..6f754e19015d 100644
--- a/drivers/char/rio/sam.h
+++ b/drivers/char/rio/sam.h
@@ -43,10 +43,6 @@
 #endif
 
 
-#if !defined( HOST ) && !defined( INKERNEL )
-#define RTA 1
-#endif
-
 #define NUM_FREE_LIST_UNITS     500
 
 #ifndef FALSE
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 0949dcef0697..7edc6a4dbdc4 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -433,7 +433,7 @@ static void rp_do_receive(struct r_port *info,
 		count += ToRecv;
 	}
 	/*  Push the data up to the tty layer */
-	ld->receive_buf(tty, cbuf, fbuf, count);
+	ld->receive_buf(tty, chead, fhead, count);
 done:
 	tty_ldisc_deref(ld);
 }
diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c
index 80a5b840e22f..fee68cc895f8 100644
--- a/drivers/char/ser_a2232.c
+++ b/drivers/char/ser_a2232.c
@@ -103,6 +103,7 @@
 
 #include <linux/serial.h>
 #include <linux/generic_serial.h>
+#include <linux/tty_flip.h>
 
 #include "ser_a2232.h"
 #include "ser_a2232fw.h"
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index 64bf89cb574f..c2490e270f1f 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -931,7 +931,7 @@ static int sx_set_real_termios (void *ptr)
 	case CS6:sx_write_channel_byte (port, hi_mask, 0x3f);break;
 	case CS5:sx_write_channel_byte (port, hi_mask, 0x1f);break;
 	default:
-		printk (KERN_INFO "sx: Invalid wordsize: %d\n", CFLAG & CSIZE);
+		printk (KERN_INFO "sx: Invalid wordsize: %u\n", CFLAG & CSIZE);
 		break;
 	}
 
@@ -958,7 +958,7 @@ static int sx_set_real_termios (void *ptr)
 	} else {
 		set_bit(TTY_HW_COOK_IN, &port->gs.tty->flags);
 	}
-	sx_dprintk (SX_DEBUG_TERMIOS, "iflags: %x(%d) ", 
+	sx_dprintk (SX_DEBUG_TERMIOS, "iflags: %x(%d) ",
 	            port->gs.tty->termios->c_iflag, 
 	            I_OTHER(port->gs.tty));
 
@@ -973,7 +973,7 @@ static int sx_set_real_termios (void *ptr)
 	} else {
 		clear_bit(TTY_HW_COOK_OUT, &port->gs.tty->flags);
 	}
-	sx_dprintk (SX_DEBUG_TERMIOS, "oflags: %x(%d)\n", 
+	sx_dprintk (SX_DEBUG_TERMIOS, "oflags: %x(%d)\n",
 	            port->gs.tty->termios->c_oflag, 
 	            O_OTHER(port->gs.tty));
 	/* port->c_dcd = sx_get_CD (port); */
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index eb8b5be4e249..076e07c1da38 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -253,6 +253,7 @@ static void tty_buffer_free_all(struct tty_struct *tty)
 
 static void tty_buffer_init(struct tty_struct *tty)
 {
+	spin_lock_init(&tty->buf.lock);
 	tty->buf.head = NULL;
 	tty->buf.tail = NULL;
 	tty->buf.free = NULL;
@@ -266,6 +267,7 @@ static struct tty_buffer *tty_buffer_alloc(size_t size)
 	p->used = 0;
 	p->size = size;
 	p->next = NULL;
+	p->active = 0;
 	p->char_buf_ptr = (char *)(p->data);
 	p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
 /* 	printk("Flip create %p\n", p); */
@@ -312,25 +314,36 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
 
 int tty_buffer_request_room(struct tty_struct *tty, size_t size)
 {
-	struct tty_buffer *b = tty->buf.tail, *n;
-	int left = 0;
+	struct tty_buffer *b, *n;
+	int left;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tty->buf.lock, flags);
 
 	/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
 	   remove this conditional if its worth it. This would be invisible
 	   to the callers */
-	if(b != NULL)
+	if ((b = tty->buf.tail) != NULL) {
 		left = b->size - b->used;
-	if(left >= size)
-		return size;
-	/* This is the slow path - looking for new buffers to use */
-	n = tty_buffer_find(tty, size);
-	if(n == NULL)
-		return left;
-	if(b != NULL)
-		b->next = n;
-	else
-		tty->buf.head = n;
-	tty->buf.tail = n;
+		b->active = 1;
+	} else
+		left = 0;
+
+	if (left < size) {
+		/* This is the slow path - looking for new buffers to use */
+		if ((n = tty_buffer_find(tty, size)) != NULL) {
+			if (b != NULL) {
+				b->next = n;
+				b->active = 0;
+			} else
+				tty->buf.head = n;
+			tty->buf.tail = n;
+			n->active = 1;
+		} else
+			size = left;
+	}
+
+	spin_unlock_irqrestore(&tty->buf.lock, flags);
 	return size;
 }
 
@@ -396,10 +409,12 @@ EXPORT_SYMBOL_GPL(tty_insert_flip_string_flags);
 int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_t size)
 {
 	int space = tty_buffer_request_room(tty, size);
-	struct tty_buffer *tb = tty->buf.tail;
-	*chars = tb->char_buf_ptr + tb->used;
-	memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
-	tb->used += space;
+	if (likely(space)) {
+		struct tty_buffer *tb = tty->buf.tail;
+		*chars = tb->char_buf_ptr + tb->used;
+		memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
+		tb->used += space;
+	}
 	return space;
 }
 
@@ -416,10 +431,12 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
 int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size)
 {
 	int space = tty_buffer_request_room(tty, size);
-	struct tty_buffer *tb = tty->buf.tail;
-	*chars = tb->char_buf_ptr + tb->used;
-	*flags = tb->flag_buf_ptr + tb->used;
-	tb->used += space;
+	if (likely(space)) {
+		struct tty_buffer *tb = tty->buf.tail;
+		*chars = tb->char_buf_ptr + tb->used;
+		*flags = tb->flag_buf_ptr + tb->used;
+		tb->used += space;
+	}
 	return space;
 }
 
@@ -2747,20 +2764,20 @@ static void flush_to_ldisc(void *private_)
 		schedule_delayed_work(&tty->buf.work, 1);
 		goto out;
 	}
-	spin_lock_irqsave(&tty->read_lock, flags);
-	while((tbuf = tty->buf.head) != NULL) {
+	spin_lock_irqsave(&tty->buf.lock, flags);
+	while((tbuf = tty->buf.head) != NULL && !tbuf->active) {
 		tty->buf.head = tbuf->next;
 		if (tty->buf.head == NULL)
 			tty->buf.tail = NULL;
-		spin_unlock_irqrestore(&tty->read_lock, flags);
+		spin_unlock_irqrestore(&tty->buf.lock, flags);
 		/* printk("Process buffer %p for %d\n", tbuf, tbuf->used); */
 		disc->receive_buf(tty, tbuf->char_buf_ptr,
 				       tbuf->flag_buf_ptr,
 				       tbuf->used);
-		spin_lock_irqsave(&tty->read_lock, flags);
+		spin_lock_irqsave(&tty->buf.lock, flags);
 		tty_buffer_free(tty, tbuf);
 	}
-	spin_unlock_irqrestore(&tty->read_lock, flags);
+	spin_unlock_irqrestore(&tty->buf.lock, flags);
 out:
 	tty_ldisc_deref(disc);
 }
@@ -2852,6 +2869,12 @@ EXPORT_SYMBOL(tty_get_baud_rate);
 
 void tty_flip_buffer_push(struct tty_struct *tty)
 {
+	unsigned long flags;
+	spin_lock_irqsave(&tty->buf.lock, flags);
+	if (tty->buf.tail != NULL)
+		tty->buf.tail->active = 0;
+	spin_unlock_irqrestore(&tty->buf.lock, flags);
+
 	if (tty->low_latency)
 		flush_to_ldisc((void *) tty);
 	else
diff --git a/drivers/char/watchdog/sbc_epx_c3.c b/drivers/char/watchdog/sbc_epx_c3.c
index 951764614ebf..837b1ec3ffe3 100644
--- a/drivers/char/watchdog/sbc_epx_c3.c
+++ b/drivers/char/watchdog/sbc_epx_c3.c
@@ -25,6 +25,7 @@
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
+#include <linux/ioport.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
@@ -91,7 +92,7 @@ static int epx_c3_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t epx_c3_write(struct file *file, const char *data,
+static ssize_t epx_c3_write(struct file *file, const char __user *data,
 			size_t len, loff_t *ppos)
 {
 	/* Refresh the timer. */
@@ -104,6 +105,7 @@ static int epx_c3_ioctl(struct inode *inode, struct file *file,
 			unsigned int cmd, unsigned long arg)
 {
 	int options, retval = -EINVAL;
+	int __user *argp = (void __user *)arg;
 	static struct watchdog_info ident = {
 		.options		= WDIOF_KEEPALIVEPING |
 					  WDIOF_MAGICCLOSE,
@@ -113,20 +115,19 @@ static int epx_c3_ioctl(struct inode *inode, struct file *file,
 
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
-		if (copy_to_user((struct watchdog_info *)arg,
-				 &ident, sizeof(ident)))
+		if (copy_to_user(argp, &ident, sizeof(ident)))
 			return -EFAULT;
 		return 0;
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-		return put_user(0,(int *)arg);
+		return put_user(0, argp);
 	case WDIOC_KEEPALIVE:
 		epx_c3_pet();
 		return 0;
 	case WDIOC_GETTIMEOUT:
-		return put_user(WATCHDOG_TIMEOUT,(int *)arg);
-	case WDIOC_SETOPTIONS: {
-		if (get_user(options, (int *)arg))
+		return put_user(WATCHDOG_TIMEOUT, argp);
+	case WDIOC_SETOPTIONS:
+		if (get_user(options, argp))
 			return -EFAULT;
 
 		if (options & WDIOS_DISABLECARD) {
@@ -140,7 +141,6 @@ static int epx_c3_ioctl(struct inode *inode, struct file *file,
 		}
 
 		return retval;
-	}
 	default:
 		return -ENOIOCTLCMD;
 	}
@@ -181,11 +181,14 @@ static int __init watchdog_init(void)
 {
 	int ret;
 
+	if (!request_region(EPXC3_WATCHDOG_CTL_REG, 2, "epxc3_watchdog"))
+		return -EBUSY;
+
 	ret = register_reboot_notifier(&epx_c3_notifier);
 	if (ret) {
 		printk(KERN_ERR PFX "cannot register reboot notifier "
 			"(err=%d)\n", ret);
-		return ret;
+		goto out;
 	}
 
 	ret = misc_register(&epx_c3_miscdev);
@@ -193,18 +196,23 @@ static int __init watchdog_init(void)
 		printk(KERN_ERR PFX "cannot register miscdev on minor=%d "
 			"(err=%d)\n", WATCHDOG_MINOR, ret);
 		unregister_reboot_notifier(&epx_c3_notifier);
-		return ret;
+		goto out;
 	}
 
 	printk(banner);
 
 	return 0;
+
+out:
+	release_region(EPXC3_WATCHDOG_CTL_REG, 2);
+	return ret;
 }
 
 static void __exit watchdog_exit(void)
 {
 	misc_deregister(&epx_c3_miscdev);
 	unregister_reboot_notifier(&epx_c3_notifier);
+	release_region(EPXC3_WATCHDOG_CTL_REG, 2);
 }
 
 module_init(watchdog_init);
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 4819e7fc00dd..18a455651121 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -11,7 +11,6 @@ menu 'EDAC - error detection and reporting (RAS)'
 config EDAC
 	tristate "EDAC core system error reporting"
 	depends on X86
-	default y
 	help
 	  EDAC is designed to report errors in the core system.
 	  These are low-level errors that are reported in the CPU or
@@ -46,7 +45,7 @@ config EDAC_MM_EDAC
 
 config EDAC_AMD76X
 	tristate "AMD 76x (760, 762, 768)"
-	depends on EDAC_MM_EDAC  && PCI
+	depends on EDAC_MM_EDAC && PCI && X86_32
 	help
 	  Support for error detection and correction on the AMD 76x
 	  series of chipsets used with the Athlon processor.
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index 770a5a633079..c454ded2b060 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -1039,10 +1039,10 @@ MODULE_DEVICE_TABLE(pci, e752x_pci_tbl);
 
 
 static struct pci_driver e752x_driver = {
-      name: BS_MOD_STR,
-      probe: e752x_init_one,
-      remove: __devexit_p(e752x_remove_one),
-      id_table: e752x_pci_tbl,
+	.name = BS_MOD_STR,
+	.probe = e752x_init_one,
+	.remove = __devexit_p(e752x_remove_one),
+	.id_table = e752x_pci_tbl,
 };
 
 
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 4be9bd0a1267..b10ee4698b1d 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -14,7 +14,6 @@
 
 
 #include <linux/config.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/proc_fs.h>
 #include <linux/kernel.h>
diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c
index 009c08fe5d69..1991f94af753 100644
--- a/drivers/edac/i82875p_edac.c
+++ b/drivers/edac/i82875p_edac.c
@@ -159,7 +159,7 @@ enum i82875p_chips {
 
 struct i82875p_pvt {
 	struct pci_dev *ovrfl_pdev;
-	void *ovrfl_window;
+	void __iomem *ovrfl_window;
 };
 
 
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index c58295914365..7230d4e08196 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -113,6 +113,16 @@ config SENSORS_DS1621
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1621.
 
+config SENSORS_F71805F
+	tristate "Fintek F71805F/FG"
+	depends on HWMON && EXPERIMENTAL
+	help
+	  If you say yes here you get support for hardware monitoring
+	  features of the Fintek F71805F/FG chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called f71805f.
+
 config SENSORS_FSCHER
 	tristate "FSC Hermes"
 	depends on HWMON && I2C && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 06d4a1d14105..fbdb8d911a72 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_SENSORS_ADM1031)	+= adm1031.o
 obj-$(CONFIG_SENSORS_ADM9240)	+= adm9240.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
+obj-$(CONFIG_SENSORS_F71805F)	+= f71805f.o
 obj-$(CONFIG_SENSORS_FSCHER)	+= fscher.o
 obj-$(CONFIG_SENSORS_FSCPOS)	+= fscpos.o
 obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
new file mode 100644
index 000000000000..e029e0a94ecc
--- /dev/null
+++ b/drivers/hwmon/f71805f.c
@@ -0,0 +1,908 @@
+/*
+ * f71805f.c - driver for the Fintek F71805F/FG Super-I/O chip integrated
+ *             hardware monitoring features
+ * Copyright (C) 2005  Jean Delvare <khali@linux-fr.org>
+ *
+ * The F71805F/FG is a LPC Super-I/O chip made by Fintek. It integrates
+ * complete hardware monitoring features: voltage, fan and temperature
+ * sensors, and manual and automatic fan speed control.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <asm/io.h>
+
+static struct platform_device *pdev;
+
+#define DRVNAME "f71805f"
+
+/*
+ * Super-I/O constants and functions
+ */
+
+#define F71805F_LD_HWM		0x04
+
+#define SIO_REG_LDSEL		0x07	/* Logical device select */
+#define SIO_REG_DEVID		0x20	/* Device ID (2 bytes) */
+#define SIO_REG_DEVREV		0x22	/* Device revision */
+#define SIO_REG_MANID		0x23	/* Fintek ID (2 bytes) */
+#define SIO_REG_ENABLE		0x30	/* Logical device enable */
+#define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
+
+#define SIO_FINTEK_ID		0x1934
+#define SIO_F71805F_ID		0x0406
+
+static inline int
+superio_inb(int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static int
+superio_inw(int base, int reg)
+{
+	int val;
+	outb(reg++, base);
+	val = inb(base + 1) << 8;
+	outb(reg, base);
+	val |= inb(base + 1);
+	return val;
+}
+
+static inline void
+superio_select(int base, int ld)
+{
+	outb(SIO_REG_LDSEL, base);
+	outb(ld, base + 1);
+}
+
+static inline void
+superio_enter(int base)
+{
+	outb(0x87, base);
+	outb(0x87, base);
+}
+
+static inline void
+superio_exit(int base)
+{
+	outb(0xaa, base);
+}
+
+/*
+ * ISA constants
+ */
+
+#define REGION_LENGTH		2
+#define ADDR_REG_OFFSET		0
+#define DATA_REG_OFFSET		1
+
+static struct resource f71805f_resource __initdata = {
+	.flags	= IORESOURCE_IO,
+};
+
+/*
+ * Registers
+ */
+
+/* in nr from 0 to 8 (8-bit values) */
+#define F71805F_REG_IN(nr)		(0x10 + (nr))
+#define F71805F_REG_IN_HIGH(nr)		(0x40 + 2 * (nr))
+#define F71805F_REG_IN_LOW(nr)		(0x41 + 2 * (nr))
+/* fan nr from 0 to 2 (12-bit values, two registers) */
+#define F71805F_REG_FAN(nr)		(0x20 + 2 * (nr))
+#define F71805F_REG_FAN_LOW(nr)		(0x28 + 2 * (nr))
+#define F71805F_REG_FAN_CTRL(nr)	(0x60 + 16 * (nr))
+/* temp nr from 0 to 2 (8-bit values) */
+#define F71805F_REG_TEMP(nr)		(0x1B + (nr))
+#define F71805F_REG_TEMP_HIGH(nr)	(0x54 + 2 * (nr))
+#define F71805F_REG_TEMP_HYST(nr)	(0x55 + 2 * (nr))
+#define F71805F_REG_TEMP_MODE		0x01
+
+#define F71805F_REG_START		0x00
+/* status nr from 0 to 2 */
+#define F71805F_REG_STATUS(nr)		(0x36 + (nr))
+
+/*
+ * Data structures and manipulation thereof
+ */
+
+struct f71805f_data {
+	unsigned short addr;
+	const char *name;
+	struct semaphore lock;
+	struct class_device *class_dev;
+
+	struct semaphore update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+	unsigned long last_limits;	/* In jiffies */
+
+	/* Register values */
+	u8 in[9];
+	u8 in_high[9];
+	u8 in_low[9];
+	u16 fan[3];
+	u16 fan_low[3];
+	u8 fan_enabled;		/* Read once at init time */
+	u8 temp[3];
+	u8 temp_high[3];
+	u8 temp_hyst[3];
+	u8 temp_mode;
+	u8 alarms[3];
+};
+
+static inline long in_from_reg(u8 reg)
+{
+	return (reg * 8);
+}
+
+/* The 2 least significant bits are not used */
+static inline u8 in_to_reg(long val)
+{
+	if (val <= 0)
+		return 0;
+	if (val >= 2016)
+		return 0xfc;
+	return (((val + 16) / 32) << 2);
+}
+
+/* in0 is downscaled by a factor 2 internally */
+static inline long in0_from_reg(u8 reg)
+{
+	return (reg * 16);
+}
+
+static inline u8 in0_to_reg(long val)
+{
+	if (val <= 0)
+		return 0;
+	if (val >= 4032)
+		return 0xfc;
+	return (((val + 32) / 64) << 2);
+}
+
+/* The 4 most significant bits are not used */
+static inline long fan_from_reg(u16 reg)
+{
+	reg &= 0xfff;
+	if (!reg || reg == 0xfff)
+		return 0;
+	return (1500000 / reg);
+}
+
+static inline u16 fan_to_reg(long rpm)
+{
+	/* If the low limit is set below what the chip can measure,
+	   store the largest possible 12-bit value in the registers,
+	   so that no alarm will ever trigger. */
+	if (rpm < 367)
+		return 0xfff;
+	return (1500000 / rpm);
+}
+
+static inline long temp_from_reg(u8 reg)
+{
+	return (reg * 1000);
+}
+
+static inline u8 temp_to_reg(long val)
+{
+	if (val < 0)
+		val = 0;
+	else if (val > 1000 * 0xff)
+		val = 0xff;
+	return ((val + 500) / 1000);
+}
+
+/*
+ * Device I/O access
+ */
+
+static u8 f71805f_read8(struct f71805f_data *data, u8 reg)
+{
+	u8 val;
+
+	down(&data->lock);
+	outb(reg, data->addr + ADDR_REG_OFFSET);
+	val = inb(data->addr + DATA_REG_OFFSET);
+	up(&data->lock);
+
+	return val;
+}
+
+static void f71805f_write8(struct f71805f_data *data, u8 reg, u8 val)
+{
+	down(&data->lock);
+	outb(reg, data->addr + ADDR_REG_OFFSET);
+	outb(val, data->addr + DATA_REG_OFFSET);
+	up(&data->lock);
+}
+
+/* It is important to read the MSB first, because doing so latches the
+   value of the LSB, so we are sure both bytes belong to the same value. */
+static u16 f71805f_read16(struct f71805f_data *data, u8 reg)
+{
+	u16 val;
+
+	down(&data->lock);
+	outb(reg, data->addr + ADDR_REG_OFFSET);
+	val = inb(data->addr + DATA_REG_OFFSET) << 8;
+	outb(++reg, data->addr + ADDR_REG_OFFSET);
+	val |= inb(data->addr + DATA_REG_OFFSET);
+	up(&data->lock);
+
+	return val;
+}
+
+static void f71805f_write16(struct f71805f_data *data, u8 reg, u16 val)
+{
+	down(&data->lock);
+	outb(reg, data->addr + ADDR_REG_OFFSET);
+	outb(val >> 8, data->addr + DATA_REG_OFFSET);
+	outb(++reg, data->addr + ADDR_REG_OFFSET);
+	outb(val & 0xff, data->addr + DATA_REG_OFFSET);
+	up(&data->lock);
+}
+
+static struct f71805f_data *f71805f_update_device(struct device *dev)
+{
+	struct f71805f_data *data = dev_get_drvdata(dev);
+	int nr;
+
+	down(&data->update_lock);
+
+	/* Limit registers cache is refreshed after 60 seconds */
+	if (time_after(jiffies, data->last_updated + 60 * HZ)
+	 || !data->valid) {
+		for (nr = 0; nr < 9; nr++) {
+			data->in_high[nr] = f71805f_read8(data,
+					    F71805F_REG_IN_HIGH(nr));
+			data->in_low[nr] = f71805f_read8(data,
+					   F71805F_REG_IN_LOW(nr));
+		}
+		for (nr = 0; nr < 3; nr++) {
+			if (data->fan_enabled & (1 << nr))
+				data->fan_low[nr] = f71805f_read16(data,
+						    F71805F_REG_FAN_LOW(nr));
+		}
+		for (nr = 0; nr < 3; nr++) {
+			data->temp_high[nr] = f71805f_read8(data,
+					      F71805F_REG_TEMP_HIGH(nr));
+			data->temp_hyst[nr] = f71805f_read8(data,
+					      F71805F_REG_TEMP_HYST(nr));
+		}
+		data->temp_mode = f71805f_read8(data, F71805F_REG_TEMP_MODE);
+
+		data->last_limits = jiffies;
+	}
+
+	/* Measurement registers cache is refreshed after 1 second */
+	if (time_after(jiffies, data->last_updated + HZ)
+	 || !data->valid) {
+		for (nr = 0; nr < 9; nr++) {
+			data->in[nr] = f71805f_read8(data,
+				       F71805F_REG_IN(nr));
+		}
+		for (nr = 0; nr < 3; nr++) {
+			if (data->fan_enabled & (1 << nr))
+				data->fan[nr] = f71805f_read16(data,
+						F71805F_REG_FAN(nr));
+		}
+		for (nr = 0; nr < 3; nr++) {
+			data->temp[nr] = f71805f_read8(data,
+					 F71805F_REG_TEMP(nr));
+		}
+		for (nr = 0; nr < 3; nr++) {
+			data->alarms[nr] = f71805f_read8(data,
+					   F71805F_REG_STATUS(nr));
+		}
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+/*
+ * Sysfs interface
+ */
+
+static ssize_t show_in0(struct device *dev, struct device_attribute *devattr,
+			char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+
+	return sprintf(buf, "%ld\n", in0_from_reg(data->in[0]));
+}
+
+static ssize_t show_in0_max(struct device *dev, struct device_attribute
+			    *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+
+	return sprintf(buf, "%ld\n", in0_from_reg(data->in_high[0]));
+}
+
+static ssize_t show_in0_min(struct device *dev, struct device_attribute
+			    *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+
+	return sprintf(buf, "%ld\n", in0_from_reg(data->in_low[0]));
+}
+
+static ssize_t set_in0_max(struct device *dev, struct device_attribute
+			   *devattr, const char *buf, size_t count)
+{
+	struct f71805f_data *data = dev_get_drvdata(dev);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_high[0] = in0_to_reg(val);
+	f71805f_write8(data, F71805F_REG_IN_HIGH(0), data->in_high[0]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t set_in0_min(struct device *dev, struct device_attribute
+			   *devattr, const char *buf, size_t count)
+{
+	struct f71805f_data *data = dev_get_drvdata(dev);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_low[0] = in0_to_reg(val);
+	f71805f_write8(data, F71805F_REG_IN_LOW(0), data->in_low[0]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+static DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL);
+static DEVICE_ATTR(in0_max, S_IRUGO| S_IWUSR, show_in0_max, set_in0_max);
+static DEVICE_ATTR(in0_min, S_IRUGO| S_IWUSR, show_in0_min, set_in0_min);
+
+static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
+		       char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+
+	return sprintf(buf, "%ld\n", in_from_reg(data->in[nr]));
+}
+
+static ssize_t show_in_max(struct device *dev, struct device_attribute
+			   *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+
+	return sprintf(buf, "%ld\n", in_from_reg(data->in_high[nr]));
+}
+
+static ssize_t show_in_min(struct device *dev, struct device_attribute
+			   *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+
+	return sprintf(buf, "%ld\n", in_from_reg(data->in_low[nr]));
+}
+
+static ssize_t set_in_max(struct device *dev, struct device_attribute
+			  *devattr, const char *buf, size_t count)
+{
+	struct f71805f_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_high[nr] = in_to_reg(val);
+	f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t set_in_min(struct device *dev, struct device_attribute
+			  *devattr, const char *buf, size_t count)
+{
+	struct f71805f_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_low[nr] = in_to_reg(val);
+	f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define sysfs_in(offset)					\
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO,		\
+		show_in, NULL, offset);				\
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR,	\
+		show_in_max, set_in_max, offset);		\
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR,	\
+		show_in_min, set_in_min, offset)
+
+sysfs_in(1);
+sysfs_in(2);
+sysfs_in(3);
+sysfs_in(4);
+sysfs_in(5);
+sysfs_in(6);
+sysfs_in(7);
+sysfs_in(8);
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
+			char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+
+	return sprintf(buf, "%ld\n", fan_from_reg(data->fan[nr]));
+}
+
+static ssize_t show_fan_min(struct device *dev, struct device_attribute
+			    *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+
+	return sprintf(buf, "%ld\n", fan_from_reg(data->fan_low[nr]));
+}
+
+static ssize_t set_fan_min(struct device *dev, struct device_attribute
+			   *devattr, const char *buf, size_t count)
+{
+	struct f71805f_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_low[nr] = fan_to_reg(val);
+	f71805f_write16(data, F71805F_REG_FAN_LOW(nr), data->fan_low[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define sysfs_fan(offset)					\
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO,		\
+		show_fan, NULL, offset - 1);			\
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,	\
+		show_fan_min, set_fan_min, offset - 1)
+
+sysfs_fan(1);
+sysfs_fan(2);
+sysfs_fan(3);
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+
+	return sprintf(buf, "%ld\n", temp_from_reg(data->temp[nr]));
+}
+
+static ssize_t show_temp_max(struct device *dev, struct device_attribute
+			     *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+
+	return sprintf(buf, "%ld\n", temp_from_reg(data->temp_high[nr]));
+}
+
+static ssize_t show_temp_hyst(struct device *dev, struct device_attribute
+			      *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+
+	return sprintf(buf, "%ld\n", temp_from_reg(data->temp_hyst[nr]));
+}
+
+static ssize_t show_temp_type(struct device *dev, struct device_attribute
+			      *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+
+	/* 3 is diode, 4 is thermistor */
+	return sprintf(buf, "%u\n", (data->temp_mode & (1 << nr)) ? 3 : 4);
+}
+
+static ssize_t set_temp_max(struct device *dev, struct device_attribute
+			    *devattr, const char *buf, size_t count)
+{
+	struct f71805f_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_high[nr] = temp_to_reg(val);
+	f71805f_write8(data, F71805F_REG_TEMP_HIGH(nr), data->temp_high[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t set_temp_hyst(struct device *dev, struct device_attribute
+			     *devattr, const char *buf, size_t count)
+{
+	struct f71805f_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_hyst[nr] = temp_to_reg(val);
+	f71805f_write8(data, F71805F_REG_TEMP_HYST(nr), data->temp_hyst[nr]);
+	up(&data->update_lock);
+
+	return count;
+}
+
+#define sysfs_temp(offset)						\
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO,		\
+		show_temp, NULL, offset - 1);				\
+static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,	\
+		show_temp_max, set_temp_max, offset - 1);		\
+static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR,	\
+		show_temp_hyst, set_temp_hyst, offset - 1);		\
+static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO,			\
+		show_temp_type, NULL, offset - 1)
+
+sysfs_temp(1);
+sysfs_temp(2);
+sysfs_temp(3);
+
+static ssize_t show_alarms_in(struct device *dev, struct device_attribute
+			      *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+
+	return sprintf(buf, "%d\n", data->alarms[0] |
+				    ((data->alarms[1] & 0x01) << 8));
+}
+
+static ssize_t show_alarms_fan(struct device *dev, struct device_attribute
+			       *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+
+	return sprintf(buf, "%d\n", data->alarms[2] & 0x07);
+}
+
+static ssize_t show_alarms_temp(struct device *dev, struct device_attribute
+				*devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+
+	return sprintf(buf, "%d\n", (data->alarms[1] >> 3) & 0x07);
+}
+
+static DEVICE_ATTR(alarms_in, S_IRUGO, show_alarms_in, NULL);
+static DEVICE_ATTR(alarms_fan, S_IRUGO, show_alarms_fan, NULL);
+static DEVICE_ATTR(alarms_temp, S_IRUGO, show_alarms_temp, NULL);
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+			 *devattr, char *buf)
+{
+	struct f71805f_data *data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", data->name);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+/*
+ * Device registration and initialization
+ */
+
+static void __devinit f71805f_init_device(struct f71805f_data *data)
+{
+	u8 reg;
+	int i;
+
+	reg = f71805f_read8(data, F71805F_REG_START);
+	if ((reg & 0x41) != 0x01) {
+		printk(KERN_DEBUG DRVNAME ": Starting monitoring "
+		       "operations\n");
+		f71805f_write8(data, F71805F_REG_START, (reg | 0x01) & ~0x40);
+	}
+
+	/* Fan monitoring can be disabled. If it is, we won't be polling
+	   the register values, and won't create the related sysfs files. */
+	for (i = 0; i < 3; i++) {
+		reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(i));
+		if (!(reg & 0x80))
+			data->fan_enabled |= (1 << i);
+	}
+}
+
+static int __devinit f71805f_probe(struct platform_device *pdev)
+{
+	struct f71805f_data *data;
+	struct resource *res;
+	int err;
+
+	if (!(data = kzalloc(sizeof(struct f71805f_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		printk(KERN_ERR DRVNAME ": Out of memory\n");
+		goto exit;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	data->addr = res->start;
+	init_MUTEX(&data->lock);
+	data->name = "f71805f";
+	init_MUTEX(&data->update_lock);
+
+	platform_set_drvdata(pdev, data);
+
+	data->class_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->class_dev)) {
+		err = PTR_ERR(data->class_dev);
+		dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
+		goto exit_free;
+	}
+
+	/* Initialize the F71805F chip */
+	f71805f_init_device(data);
+
+	/* Register sysfs interface files */
+	device_create_file(&pdev->dev, &dev_attr_in0_input);
+	device_create_file(&pdev->dev, &dev_attr_in0_max);
+	device_create_file(&pdev->dev, &dev_attr_in0_min);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in1_input.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in2_input.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in3_input.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in4_input.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in5_input.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in6_input.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in7_input.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in8_input.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in1_max.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in2_max.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in3_max.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in4_max.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in5_max.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in6_max.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in7_max.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in8_max.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in1_min.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in2_min.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in3_min.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in4_min.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in5_min.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in6_min.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in7_min.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_in8_min.dev_attr);
+	if (data->fan_enabled & (1 << 0)) {
+		device_create_file(&pdev->dev,
+				   &sensor_dev_attr_fan1_input.dev_attr);
+		device_create_file(&pdev->dev,
+				   &sensor_dev_attr_fan1_min.dev_attr);
+	}
+	if (data->fan_enabled & (1 << 1)) {
+		device_create_file(&pdev->dev,
+				   &sensor_dev_attr_fan2_input.dev_attr);
+		device_create_file(&pdev->dev,
+				   &sensor_dev_attr_fan2_min.dev_attr);
+	}
+	if (data->fan_enabled & (1 << 2)) {
+		device_create_file(&pdev->dev,
+				   &sensor_dev_attr_fan3_input.dev_attr);
+		device_create_file(&pdev->dev,
+				   &sensor_dev_attr_fan3_min.dev_attr);
+	}
+	device_create_file(&pdev->dev,
+			   &sensor_dev_attr_temp1_input.dev_attr);
+	device_create_file(&pdev->dev,
+			   &sensor_dev_attr_temp2_input.dev_attr);
+	device_create_file(&pdev->dev,
+			   &sensor_dev_attr_temp3_input.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_temp2_max.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_temp3_max.dev_attr);
+	device_create_file(&pdev->dev,
+			   &sensor_dev_attr_temp1_max_hyst.dev_attr);
+	device_create_file(&pdev->dev,
+			   &sensor_dev_attr_temp2_max_hyst.dev_attr);
+	device_create_file(&pdev->dev,
+			   &sensor_dev_attr_temp3_max_hyst.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_temp1_type.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_temp2_type.dev_attr);
+	device_create_file(&pdev->dev, &sensor_dev_attr_temp3_type.dev_attr);
+	device_create_file(&pdev->dev, &dev_attr_alarms_in);
+	device_create_file(&pdev->dev, &dev_attr_alarms_fan);
+	device_create_file(&pdev->dev, &dev_attr_alarms_temp);
+	device_create_file(&pdev->dev, &dev_attr_name);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int __devexit f71805f_remove(struct platform_device *pdev)
+{
+	struct f71805f_data *data = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	hwmon_device_unregister(data->class_dev);
+	kfree(data);
+
+	return 0;
+}
+
+static struct platform_driver f71805f_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= DRVNAME,
+	},
+	.probe		= f71805f_probe,
+	.remove		= __devexit_p(f71805f_remove),
+};
+
+static int __init f71805f_device_add(unsigned short address)
+{
+	int err;
+
+	pdev = platform_device_alloc(DRVNAME, address);
+	if (!pdev) {
+		err = -ENOMEM;
+		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		goto exit;
+	}
+
+	f71805f_resource.start = address;
+	f71805f_resource.end = address + REGION_LENGTH - 1;
+	f71805f_resource.name = pdev->name;
+	err = platform_device_add_resources(pdev, &f71805f_resource, 1);
+	if (err) {
+		printk(KERN_ERR DRVNAME ": Device resource addition failed "
+		       "(%d)\n", err);
+		goto exit_device_put;
+	}
+
+	err = platform_device_add(pdev);
+	if (err) {
+		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+		       err);
+		goto exit_device_put;
+	}
+
+	return 0;
+
+exit_device_put:
+	platform_device_put(pdev);
+exit:
+	return err;
+}
+
+static int __init f71805f_find(int sioaddr, unsigned short *address)
+{
+	int err = -ENODEV;
+	u16 devid;
+
+	superio_enter(sioaddr);
+
+	devid = superio_inw(sioaddr, SIO_REG_MANID);
+	if (devid != SIO_FINTEK_ID)
+		goto exit;
+
+	devid = superio_inw(sioaddr, SIO_REG_DEVID);
+	if (devid != SIO_F71805F_ID) {
+		printk(KERN_INFO DRVNAME ": Unsupported Fintek device, "
+		       "skipping\n");
+		goto exit;
+	}
+
+	superio_select(sioaddr, F71805F_LD_HWM);
+	if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
+		printk(KERN_WARNING DRVNAME ": Device not activated, "
+		       "skipping\n");
+		goto exit;
+	}
+
+	*address = superio_inw(sioaddr, SIO_REG_ADDR);
+	if (*address == 0) {
+		printk(KERN_WARNING DRVNAME ": Base address not set, "
+		       "skipping\n");
+		goto exit;
+	}
+
+	err = 0;
+	printk(KERN_INFO DRVNAME ": Found F71805F chip at %#x, revision %u\n",
+	       *address, superio_inb(sioaddr, SIO_REG_DEVREV));
+
+exit:
+	superio_exit(sioaddr);
+	return err;
+}
+
+static int __init f71805f_init(void)
+{
+	int err;
+	unsigned short address;
+
+	if (f71805f_find(0x2e, &address)
+	 && f71805f_find(0x4e, &address))
+		return -ENODEV;
+
+	err = platform_driver_register(&f71805f_driver);
+	if (err)
+		goto exit;
+
+	/* Sets global pdev as a side effect */
+	err = f71805f_device_add(address);
+	if (err)
+		goto exit_driver;
+
+	return 0;
+
+exit_driver:
+	platform_driver_unregister(&f71805f_driver);
+exit:
+	return err;
+}
+
+static void __exit f71805f_exit(void)
+{
+	platform_device_unregister(pdev);
+	platform_driver_unregister(&f71805f_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("F71805F hardware monitoring driver");
+
+module_init(f71805f_init);
+module_exit(f71805f_exit);
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 0da7c9c508c3..e87d52c59940 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -45,8 +45,7 @@
 
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
-					0x2e, 0x2f, I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
 static unsigned short isa_address;
 
 /* Insmod parameters */
@@ -830,6 +829,11 @@ static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
 	if ((err = i2c_attach_client(new_client)))
 		goto ERROR2;
 
+	if (!is_isa)
+		dev_info(&new_client->dev, "The I2C interface to IT87xxF "
+			 "hardware monitoring chips is deprecated. Please "
+			 "report if you still rely on it.\n");
+
 	/* Check PWM configuration */
 	enable_pwm_interface = it87_check_pwm(new_client);
 
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index a2f420d01fb7..df9e02aaa70a 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -87,15 +87,15 @@ static struct i2c_driver lm77_driver = {
 
 /* In the temperature registers, the low 3 bits are not part of the
    temperature values; they are the status bits. */
-static inline u16 LM77_TEMP_TO_REG(int temp)
+static inline s16 LM77_TEMP_TO_REG(int temp)
 {
 	int ntemp = SENSORS_LIMIT(temp, LM77_TEMP_MIN, LM77_TEMP_MAX);
-	return (u16)((ntemp / 500) * 8);
+	return (ntemp / 500) * 8;
 }
 
-static inline int LM77_TEMP_FROM_REG(u16 reg)
+static inline int LM77_TEMP_FROM_REG(s16 reg)
 {
-	return ((int)reg / 8) * 500;
+	return (reg / 8) * 500;
 }
 
 /* sysfs stuff */
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index b176bf0c4c7b..a2f6bb676235 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -303,10 +303,6 @@ struct w83792d_data {
 static int w83792d_attach_adapter(struct i2c_adapter *adapter);
 static int w83792d_detect(struct i2c_adapter *adapter, int address, int kind);
 static int w83792d_detach_client(struct i2c_client *client);
-
-static int w83792d_read_value(struct i2c_client *client, u8 register);
-static int w83792d_write_value(struct i2c_client *client, u8 register,
-				u8 value);
 static struct w83792d_data *w83792d_update_device(struct device *dev);
 
 #ifdef DEBUG
@@ -329,6 +325,20 @@ static inline long in_count_from_reg(int nr, struct w83792d_data *data)
 	return ((data->in[nr] << 2) | ((data->low_bits >> (2 * nr)) & 0x03));
 }
 
+/* The SMBus locks itself. The Winbond W83792D chip has a bank register,
+   but the driver only accesses registers in bank 0, so we don't have
+   to switch banks and lock access between switches. */
+static inline int w83792d_read_value(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static inline int
+w83792d_write_value(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
 /* following are the sysfs callback functions */
 static ssize_t show_in(struct device *dev, struct device_attribute *attr,
 			char *buf)
@@ -1386,19 +1396,6 @@ w83792d_detach_client(struct i2c_client *client)
 	return 0;
 }
 
-/* The SMBus locks itself. The Winbond W83792D chip has a bank register,
-   but the driver only accesses registers in bank 0, so we don't have
-   to switch banks and lock access between switches. */
-static int w83792d_read_value(struct i2c_client *client, u8 reg)
-{
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int w83792d_write_value(struct i2c_client *client, u8 reg, u8 value)
-{
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
 static void
 w83792d_init_client(struct i2c_client *client)
 {
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
index 938848ae162d..3df3f09995c2 100644
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ b/drivers/i2c/algos/i2c-algo-sibyte.c
@@ -202,7 +202,7 @@ EXPORT_SYMBOL(i2c_sibyte_del_bus);
 #ifdef MODULE
 MODULE_AUTHOR("Kip Walker, Broadcom Corp.");
 MODULE_DESCRIPTION("SiByte I2C-Bus algorithm");
-MODULE_PARM(bit_scan, "i");
+module_param(bit_scan, int, 0);
 MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 08d5b8fed2dc..ff92735c7c85 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -124,6 +124,7 @@ config I2C_I801
 	    ICH6
 	    ICH7
 	    ESB2
+	    ICH8
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 1c752ddc10e2..8e0f3158215f 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -32,6 +32,7 @@
     ICH6		266A
     ICH7		27DA
     ESB2		269B
+    ICH8		283E
     This driver supports several versions of Intel's I/O Controller Hubs (ICH).
     For SMBus support, they are similar to the PIIX4 and are part
     of Intel's '810' and other chipsets.
@@ -527,6 +528,7 @@ static struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
 	{ 0, }
 };
 
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index 3e5eba9fcacb..c63025a4c861 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -121,14 +121,11 @@ static struct i2c_adapter parport_adapter = {
 
 static int __init i2c_parport_init(void)
 {
-	int type_count;
-
-	type_count = sizeof(adapter_parm)/sizeof(struct adapter_parm);
-	if (type < 0 || type >= type_count) {
+	if (type < 0 || type >= ARRAY_SIZE(adapter_parm)) {
 		printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
 		type = 0;
 	}
-	
+
 	if (base == 0) {
 		printk(KERN_INFO "i2c-parport: using default base 0x%x\n", DEFAULT_BASE);
 		base = DEFAULT_BASE;
@@ -152,7 +149,7 @@ static int __init i2c_parport_init(void)
 		release_region(base, 3);
 		return -ENODEV;
 	}
-	
+
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 2854d858fc9b..7e2e8cd1c14a 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -241,14 +241,11 @@ static struct parport_driver i2c_parport_driver = {
 
 static int __init i2c_parport_init(void)
 {
-	int type_count;
-
-	type_count = sizeof(adapter_parm)/sizeof(struct adapter_parm);
-	if (type < 0 || type >= type_count) {
+	if (type < 0 || type >= ARRAY_SIZE(adapter_parm)) {
 		printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
 		type = 0;
 	}
-	
+
 	return parport_register_driver(&i2c_parport_driver);
 }
 
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 86e2234faf80..7579f4b256a8 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -861,7 +861,7 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id, struct pt_regs *r
 		decode_ISR(isr);
 	}
 
-	if (i2c->irqlogidx < sizeof(i2c->isrlog)/sizeof(u32))
+	if (i2c->irqlogidx < ARRAY_SIZE(i2c->isrlog))
 		i2c->isrlog[i2c->irqlogidx++] = isr;
 
 	show_state(i2c);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 0ce58b506046..1a2c9ab5d9e3 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -946,6 +946,20 @@ s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 *val
 	}
 }
 
+s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command,
+				   u8 length, u8 *values)
+{
+	union i2c_smbus_data data;
+
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+	data.block[0] = length;
+	memcpy(data.block + 1, values, length);
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_I2C_BLOCK_DATA, &data);
+}
+
 /* Simulate a SMBus command using the i2c protocol 
    No checking of parameters is done!  */
 static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, 
@@ -1150,6 +1164,7 @@ EXPORT_SYMBOL(i2c_smbus_read_word_data);
 EXPORT_SYMBOL(i2c_smbus_write_word_data);
 EXPORT_SYMBOL(i2c_smbus_write_block_data);
 EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
+EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
 
 MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
 MODULE_DESCRIPTION("I2C-Bus main module");
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 1c81174595b3..d633081fa4c5 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -52,9 +52,9 @@ config IDE
 
 if IDE
 
-config IDE_MAX_HWIFS 
+config IDE_MAX_HWIFS
 	int "Max IDE interfaces"
-	depends on ALPHA || SUPERH
+	depends on ALPHA || SUPERH || IA64
 	default 4
 	help
 	  This is the maximum number of IDE hardware interfaces that will
@@ -162,8 +162,8 @@ config BLK_DEV_IDECS
 	tristate "PCMCIA IDE support"
 	depends on PCMCIA
 	help
-	  Support for outboard IDE disks, tape drives, and CD-ROM drives
-	  connected through a  PCMCIA card.
+	  Support for Compact Flash cards, outboard IDE disks, tape drives,
+	  and CD-ROM drives connected through a PCMCIA card.
 
 config BLK_DEV_IDECD
 	tristate "Include IDE/ATAPI CDROM support"
@@ -267,7 +267,7 @@ config IDE_TASK_IOCTL
 	help
 	  This is a direct raw access to the media.  It is a complex but
 	  elegant solution to test and validate the domain of the hardware and
-	  perform below the driver data recover if needed.  This is the most
+	  perform below the driver data recovery if needed.  This is the most
 	  basic form of media-forensics.
 
 	  If you are unsure, say N here.
@@ -525,7 +525,7 @@ config BLK_DEV_CS5520
 	tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	help
-	  Include support for PIO tuning an virtual DMA on the Cyrix MediaGX 
+	  Include support for PIO tuning and virtual DMA on the Cyrix MediaGX
 	  5510/5520 chipset. This will automatically be detected and
 	  configured if found.
 
@@ -662,7 +662,7 @@ config PDC202XX_BURST
 
 	  It was originally designed for the PDC20246/Ultra33, whose BIOS will
 	  only setup UDMA on the first two PDC20246 cards.  It has also been
-	  used succesfully on a PDC20265/Ultra100, allowing use of UDMA modes
+	  used successfully on a PDC20265/Ultra100, allowing use of UDMA modes
 	  when the PDC20265 BIOS has been disabled (for faster boot up).
 
 	  Please read the comments at the top of
@@ -673,13 +673,6 @@ config PDC202XX_BURST
 config BLK_DEV_PDC202XX_NEW
 	tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
 
-# FIXME - probably wants to be one for old and for new
-config PDC202XX_FORCE
-	bool "Enable controller even if disabled by BIOS"
-	depends on BLK_DEV_PDC202XX_NEW
-	help
-	  Enable the PDC202xx controller even if it has been disabled in the BIOS setup.
-
 config BLK_DEV_SVWKS
 	tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
 	help
@@ -722,7 +715,7 @@ config BLK_DEV_SIS5513
 config BLK_DEV_SLC90E66
 	tristate "SLC90E66 chipset support"
 	help
-	  This driver ensures (U)DMA support for Victroy66 SouthBridges for
+	  This driver ensures (U)DMA support for Victory66 SouthBridges for
 	  SMsC with Intel NorthBridges.  This is an Ultra66 based chipset.
 	  The nice thing about it is that you can mix Ultra/DMA/PIO devices
 	  and it will handle timing cycles.  Since this is an improved
@@ -1060,7 +1053,7 @@ config IDEDMA_IVB
 	  in that mode with an 80c ribbon.
 
 	  If you are experiencing compatibility or performance problems, you
-	  MAY try to answering Y here. However, it does not necessarily solve
+	  MAY try to answer Y here. However, it does not necessarily solve
 	  any of your problems, it could even cause more of them.
 
 	  It is normally safe to answer Y; however, the default is N.
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index ca25f9e3d0f4..09086b8b6486 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -190,7 +190,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
 		if (lba48) {
 			task_ioreg_t tasklets[10];
 
-			pr_debug("%s: LBA=0x%012llx\n", drive->name, block);
+			pr_debug("%s: LBA=0x%012llx\n", drive->name,
+					(unsigned long long)block);
 
 			tasklets[0] = 0;
 			tasklets[1] = 0;
@@ -317,7 +318,8 @@ static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, s
 
 	pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
 		 drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
-		 block, rq->nr_sectors, (unsigned long)rq->buffer);
+		 (unsigned long long)block, rq->nr_sectors,
+		 (unsigned long)rq->buffer);
 
 	if (hwif->rw_disk)
 		hwif->rw_disk(drive, rq);
@@ -776,7 +778,7 @@ static void update_ordered(ide_drive_t *drive)
 			 ide_id_has_flush_cache_ext(id));
 
 		printk(KERN_INFO "%s: cache flushes %ssupported\n",
-		       drive->name, barrier ? "" : "not");
+		       drive->name, barrier ? "" : "not ");
 
 		if (barrier) {
 			ordered = QUEUE_ORDERED_DRAIN_FLUSH;
@@ -889,11 +891,7 @@ static void idedisk_setup (ide_drive_t *drive)
 	if (drive->id_read == 0)
 		return;
 
-	/*
-	 * CompactFlash cards and their brethern look just like hard drives
-	 * to us, but they are removable and don't have a doorlock mechanism.
-	 */
-	if (drive->removable && !(drive->is_flash)) {
+	if (drive->removable) {
 		/*
 		 * Removable disks (eg. SYQUEST); ignore 'WD' drives 
 		 */
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 8d50df4526a4..c01615dec202 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -55,8 +55,8 @@
 #include <asm/io.h>
 #include <asm/bitops.h>
 
-int __ide_end_request(ide_drive_t *drive, struct request *rq, int uptodate,
-		      int nr_sectors)
+static int __ide_end_request(ide_drive_t *drive, struct request *rq,
+			     int uptodate, int nr_sectors)
 {
 	int ret = 1;
 
@@ -91,7 +91,6 @@ int __ide_end_request(ide_drive_t *drive, struct request *rq, int uptodate,
 
 	return ret;
 }
-EXPORT_SYMBOL(__ide_end_request);
 
 /**
  *	ide_end_request		-	complete an IDE I/O
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index af7af958ab3e..b72dde70840a 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -1243,6 +1243,7 @@ int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout)
 		 */
 		if (stat == 0xff)
 			return -ENODEV;
+		touch_softlockup_watchdog();
 	}
 	return -EBUSY;
 }
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index e7425546b4b1..427d1c204174 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -125,45 +125,6 @@ static void ide_disk_init_mult_count(ide_drive_t *drive)
 }
 
 /**
- *	drive_is_flashcard	-	check for compact flash
- *	@drive: drive to check
- *
- *	CompactFlash cards and their brethern pretend to be removable
- *	hard disks, except:
- * 		(1) they never have a slave unit, and
- *		(2) they don't have doorlock mechanisms.
- *	This test catches them, and is invoked elsewhere when setting
- *	appropriate config bits.
- *
- *	FIXME: This treatment is probably applicable for *all* PCMCIA (PC CARD)
- *	devices, so in linux 2.3.x we should change this to just treat all
- *	PCMCIA  drives this way, and get rid of the model-name tests below
- *	(too big of an interface change for 2.4.x).
- *	At that time, we might also consider parameterizing the timeouts and
- *	retries, since these are MUCH faster than mechanical drives. -M.Lord
- */
- 
-static inline int drive_is_flashcard (ide_drive_t *drive)
-{
-	struct hd_driveid *id = drive->id;
-
-	if (drive->removable) {
-		if (id->config == 0x848a) return 1;	/* CompactFlash */
-		if (!strncmp(id->model, "KODAK ATA_FLASH", 15)	/* Kodak */
-		 || !strncmp(id->model, "Hitachi CV", 10)	/* Hitachi */
-		 || !strncmp(id->model, "SunDisk SDCFB", 13)	/* old SanDisk */
-		 || !strncmp(id->model, "SanDisk SDCFB", 13)	/* SanDisk */
-		 || !strncmp(id->model, "HAGIWARA HPC", 12)	/* Hagiwara */
-		 || !strncmp(id->model, "LEXAR ATA_FLASH", 15)	/* Lexar */
-		 || !strncmp(id->model, "ATA_FLASH", 9))	/* Simple Tech */
-		{
-			return 1;	/* yes, it is a flash memory card */
-		}
-	}
-	return 0;	/* no, it is not a flash memory card */
-}
-
-/**
  *	do_identify	-	identify a drive
  *	@drive: drive to identify 
  *	@cmd: command used
@@ -278,13 +239,17 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
 	/*
 	 * Not an ATAPI device: looks like a "regular" hard disk
 	 */
-	if (id->config & (1<<7))
+
+	/*
+	 * 0x848a = CompactFlash device
+	 * These are *not* removable in Linux definition of the term
+	 */
+
+	if ((id->config != 0x848a) && (id->config & (1<<7)))
 		drive->removable = 1;
 
-	if (drive_is_flashcard(drive))
-		drive->is_flash = 1;
 	drive->media = ide_disk;
-	printk("%s DISK drive\n", (drive->is_flash) ? "CFA" : "ATA" );
+	printk("%s DISK drive\n", (id->config == 0x848a) ? "CFA" : "ATA" );
 	QUIRK_LIST(drive);
 	return;
 
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index afeb02bbb722..b2cc43702f65 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -242,7 +242,6 @@ static void init_hwif_data(ide_hwif_t *hwif, unsigned int index)
 		drive->name[2]			= 'a' + (index * MAX_DRIVES) + unit;
 		drive->max_failures		= IDE_DEFAULT_MAX_FAILURES;
 		drive->using_dma		= 0;
-		drive->is_flash			= 0;
 		drive->vdma			= 0;
 		INIT_LIST_HEAD(&drive->list);
 		init_completion(&drive->gendev_rel_comp);
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index a21b1e11eef4..c743e68c33aa 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -262,6 +262,21 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
 	else
 		pci_set_drvdata(dev, (void *) aec6xxx_34_base);
 
+	/* These are necessary to get AEC6280 Macintosh cards to work */
+	if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
+	    (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
+		u8 reg49h = 0, reg4ah = 0;
+		/* Clear reset and test bits.  */
+		pci_read_config_byte(dev, 0x49, &reg49h);
+		pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
+		/* Enable chip interrupt output.  */
+		pci_read_config_byte(dev, 0x4a, &reg4ah);
+		pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
+		/* Enable burst mode. */
+		pci_read_config_byte(dev, 0x4a, &reg4ah);
+		pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
+	}
+
 	return dev->irq;
 }
 
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 7b589d948bf9..940bdd4c5784 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1288,6 +1288,10 @@ static void __devinit hpt37x_clocking(ide_hwif_t *hwif)
 				goto init_hpt37X_done;
 			}
 		}
+		if (!pci_get_drvdata(dev)) {
+			printk("No Clock Stabilization!!!\n");
+			return;
+		}
 pll_recal:
 		if (adjust & 1)
 			pll -= (adjust >> 1);
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 108fda83fea4..38f41b377ff6 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -733,7 +733,7 @@ static void __devinit it8212_disable_raid(struct pci_dev *dev)
 
 	pci_write_config_dword(dev,0x4C, 0x02040204);
 	pci_write_config_byte(dev, 0x42, 0x36);
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0);
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
 }
 
 static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const char *name)
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index fe06ebb0e5bf..acd63173199b 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -420,9 +420,6 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = {
 		.init_hwif	= init_hwif_pdc202new,
 		.channels	= 2,
 		.autodma	= AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
-		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
 		.bootable	= OFF_BOARD,
 	},{	/* 3 */
 		.name		= "PDC20271",
@@ -447,9 +444,6 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = {
 		.init_hwif	= init_hwif_pdc202new,
 		.channels	= 2,
 		.autodma	= AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
-		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
 		.bootable	= OFF_BOARD,
 	},{	/* 6 */
 		.name		= "PDC20277",
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index ad9d95817f95..6f8f8645b02c 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -786,9 +786,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
 		.init_dma	= init_dma_pdc202xx,
 		.channels	= 2,
 		.autodma	= AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
-		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
 		.bootable	= OFF_BOARD,
 		.extra		= 16,
 	},{	/* 1 */
@@ -799,9 +796,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
 		.init_dma	= init_dma_pdc202xx,
 		.channels	= 2,
 		.autodma	= AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
-		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
 		.bootable	= OFF_BOARD,
 		.extra		= 48,
 		.flags		= IDEPCI_FLAG_FORCE_PDC,
@@ -813,9 +807,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
 		.init_dma	= init_dma_pdc202xx,
 		.channels	= 2,
 		.autodma	= AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
-		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
 		.bootable	= OFF_BOARD,
 		.extra		= 48,
 	},{	/* 3 */
@@ -826,9 +817,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
 		.init_dma	= init_dma_pdc202xx,
 		.channels	= 2,
 		.autodma	= AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
-		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
 		.bootable	= OFF_BOARD,
 		.extra		= 48,
 		.flags		= IDEPCI_FLAG_FORCE_PDC,
@@ -840,9 +828,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
 		.init_dma	= init_dma_pdc202xx,
 		.channels	= 2,
 		.autodma	= AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
-		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
 		.bootable	= OFF_BOARD,
 		.extra		= 48,
 	}
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index b3e77df63cef..e9b83e1a3028 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -135,6 +135,7 @@ static u8 piix_ratemask (ide_drive_t *drive)
 		case PCI_DEVICE_ID_INTEL_ICH6_19:
 		case PCI_DEVICE_ID_INTEL_ICH7_21:
 		case PCI_DEVICE_ID_INTEL_ESB2_18:
+		case PCI_DEVICE_ID_INTEL_ICH8_6:
 			mode = 3;
 			break;
 		/* UDMA 66 capable */
@@ -449,6 +450,7 @@ static unsigned int __devinit init_chipset_piix (struct pci_dev *dev, const char
 		case PCI_DEVICE_ID_INTEL_ICH6_19:
 		case PCI_DEVICE_ID_INTEL_ICH7_21:
 		case PCI_DEVICE_ID_INTEL_ESB2_18:
+		case PCI_DEVICE_ID_INTEL_ICH8_6:
 		{
 			unsigned int extra = 0;
 			pci_read_config_dword(dev, 0x54, &extra);
@@ -575,6 +577,7 @@ static ide_pci_device_t piix_pci_info[] __devinitdata = {
 	/* 21 */ DECLARE_PIIX_DEV("ICH7"),
 	/* 22 */ DECLARE_PIIX_DEV("ICH4"),
 	/* 23 */ DECLARE_PIIX_DEV("ESB2"),
+	/* 24 */ DECLARE_PIIX_DEV("ICH8M"),
 };
 
 /**
@@ -651,6 +654,7 @@ static struct pci_device_id piix_pci_tbl[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 21},
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 22},
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_18, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 23},
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 24},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 4ee597d08797..2b286e865163 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2003 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License
@@ -510,7 +510,7 @@ sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
 				       drive->name);
 				goto use_pio_instead;
 			} else {
-				u32 xcount, bcount =
+				u32 bcount =
 				    0x10000 - (cur_addr & 0xffff);
 
 				if (bcount > cur_len)
@@ -525,8 +525,7 @@ sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
 				*table = 0x0;
 				table++;
 
-				xcount = bcount & 0xffff;
-				*table = cpu_to_be32(xcount);
+				*table = cpu_to_be32(bcount);
 				table++;
 
 				cur_addr += bcount;
@@ -680,7 +679,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
 		return -EIO;
 
 	/* Create /proc/ide entries */
-	create_proc_ide_interfaces(); 
+	create_proc_ide_interfaces();
 
 	return 0;
 }
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index e95c4293a496..f6a05965a4e8 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -1319,15 +1319,6 @@ static struct class ucm_class = {
 	.release = ib_ucm_release_class_dev
 };
 
-static ssize_t show_dev(struct class_device *class_dev, char *buf)
-{
-	struct ib_ucm_device *dev;
-	
-	dev = container_of(class_dev, struct ib_ucm_device, class_dev);
-	return print_dev_t(buf, dev->dev.dev);
-}
-static CLASS_DEVICE_ATTR(dev, S_IRUGO, show_dev, NULL);
-
 static ssize_t show_ibdev(struct class_device *class_dev, char *buf)
 {
 	struct ib_ucm_device *dev;
@@ -1364,15 +1355,13 @@ static void ib_ucm_add_one(struct ib_device *device)
 
 	ucm_dev->class_dev.class = &ucm_class;
 	ucm_dev->class_dev.dev = device->dma_device;
+	ucm_dev->class_dev.devt = ucm_dev->dev.dev;
 	snprintf(ucm_dev->class_dev.class_id, BUS_ID_SIZE, "ucm%d",
 		 ucm_dev->devnum);
 	if (class_device_register(&ucm_dev->class_dev))
 		goto err_cdev;
 
 	if (class_device_create_file(&ucm_dev->class_dev,
-				     &class_device_attr_dev))
-		goto err_class;
-	if (class_device_create_file(&ucm_dev->class_dev,
 				     &class_device_attr_ibdev))
 		goto err_class;
 
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 0ef560144be3..6dfc94122dd9 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -351,7 +351,7 @@ config HISAX_ENTERNOW_PCI
 
 config HISAX_AMD7930
 	bool "Am7930 (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && SPARC
+	depends on EXPERIMENTAL && SPARC && BROKEN
 	help
 	  This enables HiSax support for the AMD7930 chips on some SPARCs.
 	  This code is not finished yet.
diff --git a/drivers/isdn/hisax/hisax.h b/drivers/isdn/hisax/hisax.h
index 1b85ce166af8..11fe537e2f6f 100644
--- a/drivers/isdn/hisax/hisax.h
+++ b/drivers/isdn/hisax/hisax.h
@@ -216,7 +216,7 @@ struct Layer1 {
 #define GROUP_TEI	127
 #define TEI_SAPI	63
 #define CTRL_SAPI	0
-#define PACKET_NOACK	250
+#define PACKET_NOACK	7
 
 /* Layer2 Flags */
 
diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c
index 3314a5a19854..94c9afb7017c 100644
--- a/drivers/isdn/sc/ioctl.c
+++ b/drivers/isdn/sc/ioctl.c
@@ -71,14 +71,14 @@ int sc_ioctl(int card, scs_ioctl *data)
 		/*
 		 * Get the SRec from user space
 		 */
-		if (copy_from_user(srec, data->dataptr, sizeof(srec))) {
+		if (copy_from_user(srec, data->dataptr, SCIOC_SRECSIZE)) {
 			kfree(rcvmsg);
 			kfree(srec);
 			return -EFAULT;
 		}
 
 		status = send_and_receive(card, CMPID, cmReqType2, cmReqClass0, cmReqLoadProc,
-				0, sizeof(srec), srec, rcvmsg, SAR_TIMEOUT);
+				0, SCIOC_SRECSIZE, srec, rcvmsg, SAR_TIMEOUT);
 		kfree(rcvmsg);
 		kfree(srec);
 
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 7d4a0ac28c06..12ad462737ba 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -187,6 +187,14 @@ config WINDFARM_PM91
 	  This driver provides thermal control for the PowerMac9,1
           which is the recent (SMU based) single CPU desktop G5
 
+config WINDFARM_PM112
+	tristate "Support for thermal management on PowerMac11,2"
+	depends on WINDFARM && I2C && PMAC_SMU
+	select I2C_POWERMAC
+	help
+	  This driver provides thermal control for the PowerMac11,2
+	  which are the recent dual and quad G5 machines using the
+	  970MP dual-core processor.
 
 config ANSLCD
 	tristate "Support for ANS LCD display"
diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
index f4657aa81fb0..6081acdea404 100644
--- a/drivers/macintosh/Makefile
+++ b/drivers/macintosh/Makefile
@@ -35,3 +35,8 @@ obj-$(CONFIG_WINDFARM_PM91)     += windfarm_smu_controls.o \
 				   windfarm_smu_sensors.o \
 				   windfarm_lm75_sensor.o windfarm_pid.o \
 				   windfarm_cpufreq_clamp.o windfarm_pm91.o
+obj-$(CONFIG_WINDFARM_PM112)	+= windfarm_pm112.o windfarm_smu_sat.o \
+				   windfarm_smu_controls.o \
+				   windfarm_smu_sensors.o \
+				   windfarm_max6690_sensor.o \
+				   windfarm_lm75_sensor.o windfarm_pid.o
diff --git a/drivers/macintosh/windfarm.h b/drivers/macintosh/windfarm.h
index 3f0cb0312ea3..7a2482cc26a7 100644
--- a/drivers/macintosh/windfarm.h
+++ b/drivers/macintosh/windfarm.h
@@ -14,6 +14,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/notifier.h>
+#include <linux/device.h>
 
 /* Display a 16.16 fixed point value */
 #define FIX32TOPRINT(f)	((f) >> 16),((((f) & 0xffff) * 1000) >> 16)
@@ -39,6 +40,7 @@ struct wf_control {
 	char			*name;
 	int			type;
 	struct kref		ref;
+	struct device_attribute	attr;
 };
 
 #define WF_CONTROL_TYPE_GENERIC		0
@@ -87,6 +89,7 @@ struct wf_sensor {
 	struct wf_sensor_ops	*ops;
 	char			*name;
 	struct kref		ref;
+	struct device_attribute	attr;
 };
 
 /* Same lifetime rules as controls */
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index 6c2a471ea6c0..bb8d5efe19bf 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -33,6 +33,7 @@
 #include <linux/reboot.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/mutex.h>
 
 #include "windfarm.h"
 
@@ -48,13 +49,17 @@
 
 static LIST_HEAD(wf_controls);
 static LIST_HEAD(wf_sensors);
-static DECLARE_MUTEX(wf_lock);
+static DEFINE_MUTEX(wf_lock);
 static struct notifier_block *wf_client_list;
 static int wf_client_count;
 static unsigned int wf_overtemp;
 static unsigned int wf_overtemp_counter;
 struct task_struct *wf_thread;
 
+static struct platform_device wf_platform_device = {
+	.name	= "windfarm",
+};
+
 /*
  * Utilities & tick thread
  */
@@ -156,26 +161,67 @@ static void wf_control_release(struct kref *kref)
 		kfree(ct);
 }
 
+static ssize_t wf_show_control(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct wf_control *ctrl = container_of(attr, struct wf_control, attr);
+	s32 val = 0;
+	int err;
+
+	err = ctrl->ops->get_value(ctrl, &val);
+	if (err < 0)
+		return err;
+	return sprintf(buf, "%d\n", val);
+}
+
+/* This is really only for debugging... */
+static ssize_t wf_store_control(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct wf_control *ctrl = container_of(attr, struct wf_control, attr);
+	int val;
+	int err;
+	char *endp;
+
+	val = simple_strtoul(buf, &endp, 0);
+	while (endp < buf + count && (*endp == ' ' || *endp == '\n'))
+		++endp;
+	if (endp - buf < count)
+		return -EINVAL;
+	err = ctrl->ops->set_value(ctrl, val);
+	if (err < 0)
+		return err;
+	return count;
+}
+
 int wf_register_control(struct wf_control *new_ct)
 {
 	struct wf_control *ct;
 
-	down(&wf_lock);
+	mutex_lock(&wf_lock);
 	list_for_each_entry(ct, &wf_controls, link) {
 		if (!strcmp(ct->name, new_ct->name)) {
 			printk(KERN_WARNING "windfarm: trying to register"
 			       " duplicate control %s\n", ct->name);
-			up(&wf_lock);
+			mutex_unlock(&wf_lock);
 			return -EEXIST;
 		}
 	}
 	kref_init(&new_ct->ref);
 	list_add(&new_ct->link, &wf_controls);
 
+	new_ct->attr.attr.name = new_ct->name;
+	new_ct->attr.attr.owner = THIS_MODULE;
+	new_ct->attr.attr.mode = 0644;
+	new_ct->attr.show = wf_show_control;
+	new_ct->attr.store = wf_store_control;
+	device_create_file(&wf_platform_device.dev, &new_ct->attr);
+
 	DBG("wf: Registered control %s\n", new_ct->name);
 
 	wf_notify(WF_EVENT_NEW_CONTROL, new_ct);
-	up(&wf_lock);
+	mutex_unlock(&wf_lock);
 
 	return 0;
 }
@@ -183,9 +229,9 @@ EXPORT_SYMBOL_GPL(wf_register_control);
 
 void wf_unregister_control(struct wf_control *ct)
 {
-	down(&wf_lock);
+	mutex_lock(&wf_lock);
 	list_del(&ct->link);
-	up(&wf_lock);
+	mutex_unlock(&wf_lock);
 
 	DBG("wf: Unregistered control %s\n", ct->name);
 
@@ -197,16 +243,16 @@ struct wf_control * wf_find_control(const char *name)
 {
 	struct wf_control *ct;
 
-	down(&wf_lock);
+	mutex_lock(&wf_lock);
 	list_for_each_entry(ct, &wf_controls, link) {
 		if (!strcmp(ct->name, name)) {
 			if (wf_get_control(ct))
 				ct = NULL;
-			up(&wf_lock);
+			mutex_unlock(&wf_lock);
 			return ct;
 		}
 	}
-	up(&wf_lock);
+	mutex_unlock(&wf_lock);
 	return NULL;
 }
 EXPORT_SYMBOL_GPL(wf_find_control);
@@ -246,26 +292,46 @@ static void wf_sensor_release(struct kref *kref)
 		kfree(sr);
 }
 
+static ssize_t wf_show_sensor(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct wf_sensor *sens = container_of(attr, struct wf_sensor, attr);
+	s32 val = 0;
+	int err;
+
+	err = sens->ops->get_value(sens, &val);
+	if (err < 0)
+		return err;
+	return sprintf(buf, "%d.%03d\n", FIX32TOPRINT(val));
+}
+
 int wf_register_sensor(struct wf_sensor *new_sr)
 {
 	struct wf_sensor *sr;
 
-	down(&wf_lock);
+	mutex_lock(&wf_lock);
 	list_for_each_entry(sr, &wf_sensors, link) {
 		if (!strcmp(sr->name, new_sr->name)) {
 			printk(KERN_WARNING "windfarm: trying to register"
 			       " duplicate sensor %s\n", sr->name);
-			up(&wf_lock);
+			mutex_unlock(&wf_lock);
 			return -EEXIST;
 		}
 	}
 	kref_init(&new_sr->ref);
 	list_add(&new_sr->link, &wf_sensors);
 
+	new_sr->attr.attr.name = new_sr->name;
+	new_sr->attr.attr.owner = THIS_MODULE;
+	new_sr->attr.attr.mode = 0444;
+	new_sr->attr.show = wf_show_sensor;
+	new_sr->attr.store = NULL;
+	device_create_file(&wf_platform_device.dev, &new_sr->attr);
+
 	DBG("wf: Registered sensor %s\n", new_sr->name);
 
 	wf_notify(WF_EVENT_NEW_SENSOR, new_sr);
-	up(&wf_lock);
+	mutex_unlock(&wf_lock);
 
 	return 0;
 }
@@ -273,9 +339,9 @@ EXPORT_SYMBOL_GPL(wf_register_sensor);
 
 void wf_unregister_sensor(struct wf_sensor *sr)
 {
-	down(&wf_lock);
+	mutex_lock(&wf_lock);
 	list_del(&sr->link);
-	up(&wf_lock);
+	mutex_unlock(&wf_lock);
 
 	DBG("wf: Unregistered sensor %s\n", sr->name);
 
@@ -287,16 +353,16 @@ struct wf_sensor * wf_find_sensor(const char *name)
 {
 	struct wf_sensor *sr;
 
-	down(&wf_lock);
+	mutex_lock(&wf_lock);
 	list_for_each_entry(sr, &wf_sensors, link) {
 		if (!strcmp(sr->name, name)) {
 			if (wf_get_sensor(sr))
 				sr = NULL;
-			up(&wf_lock);
+			mutex_unlock(&wf_lock);
 			return sr;
 		}
 	}
-	up(&wf_lock);
+	mutex_unlock(&wf_lock);
 	return NULL;
 }
 EXPORT_SYMBOL_GPL(wf_find_sensor);
@@ -329,7 +395,7 @@ int wf_register_client(struct notifier_block *nb)
 	struct wf_control *ct;
 	struct wf_sensor *sr;
 
-	down(&wf_lock);
+	mutex_lock(&wf_lock);
 	rc = notifier_chain_register(&wf_client_list, nb);
 	if (rc != 0)
 		goto bail;
@@ -341,19 +407,19 @@ int wf_register_client(struct notifier_block *nb)
 	if (wf_client_count == 1)
 		wf_start_thread();
  bail:
-	up(&wf_lock);
+	mutex_unlock(&wf_lock);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(wf_register_client);
 
 int wf_unregister_client(struct notifier_block *nb)
 {
-	down(&wf_lock);
+	mutex_lock(&wf_lock);
 	notifier_chain_unregister(&wf_client_list, nb);
 	wf_client_count++;
 	if (wf_client_count == 0)
 		wf_stop_thread();
-	up(&wf_lock);
+	mutex_unlock(&wf_lock);
 
 	return 0;
 }
@@ -361,23 +427,23 @@ EXPORT_SYMBOL_GPL(wf_unregister_client);
 
 void wf_set_overtemp(void)
 {
-	down(&wf_lock);
+	mutex_lock(&wf_lock);
 	wf_overtemp++;
 	if (wf_overtemp == 1) {
 		printk(KERN_WARNING "windfarm: Overtemp condition detected !\n");
 		wf_overtemp_counter = 0;
 		wf_notify(WF_EVENT_OVERTEMP, NULL);
 	}
-	up(&wf_lock);
+	mutex_unlock(&wf_lock);
 }
 EXPORT_SYMBOL_GPL(wf_set_overtemp);
 
 void wf_clear_overtemp(void)
 {
-	down(&wf_lock);
+	mutex_lock(&wf_lock);
 	WARN_ON(wf_overtemp == 0);
 	if (wf_overtemp == 0) {
-		up(&wf_lock);
+		mutex_unlock(&wf_lock);
 		return;
 	}
 	wf_overtemp--;
@@ -385,7 +451,7 @@ void wf_clear_overtemp(void)
 		printk(KERN_WARNING "windfarm: Overtemp condition cleared !\n");
 		wf_notify(WF_EVENT_NORMALTEMP, NULL);
 	}
-	up(&wf_lock);
+	mutex_unlock(&wf_lock);
 }
 EXPORT_SYMBOL_GPL(wf_clear_overtemp);
 
@@ -395,10 +461,6 @@ int wf_is_overtemp(void)
 }
 EXPORT_SYMBOL_GPL(wf_is_overtemp);
 
-static struct platform_device wf_platform_device = {
-	.name	= "windfarm",
-};
-
 static int __init windfarm_core_init(void)
 {
 	DBG("wf: core loaded\n");
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
new file mode 100644
index 000000000000..5b9ad6ca7cba
--- /dev/null
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -0,0 +1,169 @@
+/*
+ * Windfarm PowerMac thermal control.  MAX6690 sensor.
+ *
+ * Copyright (C) 2005 Paul Mackerras, IBM Corp. <paulus@samba.org>
+ *
+ * Use and redistribute under the terms of the GNU GPL v2.
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>
+#include <asm/prom.h>
+#include <asm/pmac_low_i2c.h>
+
+#include "windfarm.h"
+
+#define VERSION "0.1"
+
+/* This currently only exports the external temperature sensor,
+   since that's all the control loops need. */
+
+/* Some MAX6690 register numbers */
+#define MAX6690_INTERNAL_TEMP	0
+#define MAX6690_EXTERNAL_TEMP	1
+
+struct wf_6690_sensor {
+	struct i2c_client	i2c;
+	struct wf_sensor	sens;
+};
+
+#define wf_to_6690(x)	container_of((x), struct wf_6690_sensor, sens)
+#define i2c_to_6690(x)	container_of((x), struct wf_6690_sensor, i2c)
+
+static int wf_max6690_attach(struct i2c_adapter *adapter);
+static int wf_max6690_detach(struct i2c_client *client);
+
+static struct i2c_driver wf_max6690_driver = {
+	.driver = {
+		.name		= "wf_max6690",
+	},
+	.attach_adapter	= wf_max6690_attach,
+	.detach_client	= wf_max6690_detach,
+};
+
+static int wf_max6690_get(struct wf_sensor *sr, s32 *value)
+{
+	struct wf_6690_sensor *max = wf_to_6690(sr);
+	s32 data;
+
+	if (max->i2c.adapter == NULL)
+		return -ENODEV;
+
+	/* chip gets initialized by firmware */
+	data = i2c_smbus_read_byte_data(&max->i2c, MAX6690_EXTERNAL_TEMP);
+	if (data < 0)
+		return data;
+	*value = data << 16;
+	return 0;
+}
+
+static void wf_max6690_release(struct wf_sensor *sr)
+{
+	struct wf_6690_sensor *max = wf_to_6690(sr);
+
+	if (max->i2c.adapter) {
+		i2c_detach_client(&max->i2c);
+		max->i2c.adapter = NULL;
+	}
+	kfree(max);
+}
+
+static struct wf_sensor_ops wf_max6690_ops = {
+	.get_value	= wf_max6690_get,
+	.release	= wf_max6690_release,
+	.owner		= THIS_MODULE,
+};
+
+static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr)
+{
+	struct wf_6690_sensor *max;
+	char *name = "u4-temp";
+
+	max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
+	if (max == NULL) {
+		printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor %s: "
+		       "no memory\n", name);
+		return;
+	}
+
+	max->sens.ops = &wf_max6690_ops;
+	max->sens.name = name;
+	max->i2c.addr = addr >> 1;
+	max->i2c.adapter = adapter;
+	max->i2c.driver = &wf_max6690_driver;
+	strncpy(max->i2c.name, name, I2C_NAME_SIZE-1);
+
+	if (i2c_attach_client(&max->i2c)) {
+		printk(KERN_ERR "windfarm: failed to attach MAX6690 sensor\n");
+		goto fail;
+	}
+
+	if (wf_register_sensor(&max->sens)) {
+		i2c_detach_client(&max->i2c);
+		goto fail;
+	}
+
+	return;
+
+ fail:
+	kfree(max);
+}
+
+static int wf_max6690_attach(struct i2c_adapter *adapter)
+{
+	struct device_node *busnode, *dev = NULL;
+	struct pmac_i2c_bus *bus;
+	const char *loc;
+	u32 *reg;
+
+	bus = pmac_i2c_adapter_to_bus(adapter);
+	if (bus == NULL)
+		return -ENODEV;
+	busnode = pmac_i2c_get_bus_node(bus);
+
+	while ((dev = of_get_next_child(busnode, dev)) != NULL) {
+		if (!device_is_compatible(dev, "max6690"))
+			continue;
+		loc = get_property(dev, "hwsensor-location", NULL);
+		reg = (u32 *) get_property(dev, "reg", NULL);
+		if (!loc || !reg)
+			continue;
+		printk("found max6690, loc=%s reg=%x\n", loc, *reg);
+		if (strcmp(loc, "BACKSIDE"))
+			continue;
+		wf_max6690_create(adapter, *reg);
+	}
+
+	return 0;
+}
+
+static int wf_max6690_detach(struct i2c_client *client)
+{
+	struct wf_6690_sensor *max = i2c_to_6690(client);
+
+	max->i2c.adapter = NULL;
+	wf_unregister_sensor(&max->sens);
+
+	return 0;
+}
+
+static int __init wf_max6690_sensor_init(void)
+{
+	return i2c_add_driver(&wf_max6690_driver);
+}
+
+static void __exit wf_max6690_sensor_exit(void)
+{
+	i2c_del_driver(&wf_max6690_driver);
+}
+
+module_init(wf_max6690_sensor_init);
+module_exit(wf_max6690_sensor_exit);
+
+MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
+MODULE_DESCRIPTION("MAX6690 sensor objects for PowerMac thermal control");
+MODULE_LICENSE("GPL");
diff --git a/drivers/macintosh/windfarm_pid.c b/drivers/macintosh/windfarm_pid.c
index 2e803b368757..0842432e27ad 100644
--- a/drivers/macintosh/windfarm_pid.c
+++ b/drivers/macintosh/windfarm_pid.c
@@ -88,8 +88,8 @@ EXPORT_SYMBOL_GPL(wf_cpu_pid_init);
 
 s32 wf_cpu_pid_run(struct wf_cpu_pid_state *st, s32 new_power, s32 new_temp)
 {
-	s64	error, integ, deriv, prop;
-	s32	target, sval, adj;
+	s64	integ, deriv, prop;
+	s32	error, target, sval, adj;
 	int	i, hlen = st->param.history_len;
 
 	/* Calculate error term */
@@ -117,7 +117,7 @@ s32 wf_cpu_pid_run(struct wf_cpu_pid_state *st, s32 new_power, s32 new_temp)
 		integ += st->errors[(st->index + hlen - i) % hlen];
 	integ *= st->param.interval;
 	integ *= st->param.gr;
-	sval = st->param.tmax - ((integ >> 20) & 0xffffffff);
+	sval = st->param.tmax - (s32)(integ >> 20);
 	adj = min(st->param.ttarget, sval);
 
 	DBG("integ: %lx, sval: %lx, adj: %lx\n", integ, sval, adj);
@@ -129,7 +129,7 @@ s32 wf_cpu_pid_run(struct wf_cpu_pid_state *st, s32 new_power, s32 new_temp)
 	deriv *= st->param.gd;
 
 	/* Calculate proportional term */
-	prop = (new_temp - adj);
+	prop = st->last_delta = (new_temp - adj);
 	prop *= st->param.gp;
 
 	DBG("deriv: %lx, prop: %lx\n", deriv, prop);
diff --git a/drivers/macintosh/windfarm_pid.h b/drivers/macintosh/windfarm_pid.h
index a364c2a2499c..bbccc22d42b8 100644
--- a/drivers/macintosh/windfarm_pid.h
+++ b/drivers/macintosh/windfarm_pid.h
@@ -72,6 +72,7 @@ struct wf_cpu_pid_state {
 	int	index; 				/* index of current power */
 	int	tindex; 			/* index of current temp */
 	s32	target;				/* current target value */
+	s32	last_delta;			/* last Tactual - Ttarget */
 	s32	powers[WF_PID_MAX_HISTORY];	/* power history buffer */
 	s32	errors[WF_PID_MAX_HISTORY];	/* error history buffer */
 	s32	temps[2];			/* temp. history buffer */
diff --git a/drivers/macintosh/windfarm_pm112.c b/drivers/macintosh/windfarm_pm112.c
new file mode 100644
index 000000000000..c2a4e689c784
--- /dev/null
+++ b/drivers/macintosh/windfarm_pm112.c
@@ -0,0 +1,698 @@
+/*
+ * Windfarm PowerMac thermal control.
+ * Control loops for machines with SMU and PPC970MP processors.
+ *
+ * Copyright (C) 2005 Paul Mackerras, IBM Corp. <paulus@samba.org>
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * Use and redistribute under the terms of the GNU GPL v2.
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <asm/prom.h>
+#include <asm/smu.h>
+
+#include "windfarm.h"
+#include "windfarm_pid.h"
+
+#define VERSION "0.2"
+
+#define DEBUG
+#undef LOTSA_DEBUG
+
+#ifdef DEBUG
+#define DBG(args...)	printk(args)
+#else
+#define DBG(args...)	do { } while(0)
+#endif
+
+#ifdef LOTSA_DEBUG
+#define DBG_LOTS(args...)	printk(args)
+#else
+#define DBG_LOTS(args...)	do { } while(0)
+#endif
+
+/* define this to force CPU overtemp to 60 degree, useful for testing
+ * the overtemp code
+ */
+#undef HACKED_OVERTEMP
+
+/* We currently only handle 2 chips, 4 cores... */
+#define NR_CHIPS	2
+#define NR_CORES	4
+#define NR_CPU_FANS	3 * NR_CHIPS
+
+/* Controls and sensors */
+static struct wf_sensor *sens_cpu_temp[NR_CORES];
+static struct wf_sensor *sens_cpu_power[NR_CORES];
+static struct wf_sensor *hd_temp;
+static struct wf_sensor *slots_power;
+static struct wf_sensor *u4_temp;
+
+static struct wf_control *cpu_fans[NR_CPU_FANS];
+static char *cpu_fan_names[NR_CPU_FANS] = {
+	"cpu-rear-fan-0",
+	"cpu-rear-fan-1",
+	"cpu-front-fan-0",
+	"cpu-front-fan-1",
+	"cpu-pump-0",
+	"cpu-pump-1",
+};
+static struct wf_control *cpufreq_clamp;
+
+/* Second pump isn't required (and isn't actually present) */
+#define CPU_FANS_REQD		(NR_CPU_FANS - 2)
+#define FIRST_PUMP		4
+#define LAST_PUMP		5
+
+/* We keep a temperature history for average calculation of 180s */
+#define CPU_TEMP_HIST_SIZE	180
+
+/* Scale factor for fan speed, *100 */
+static int cpu_fan_scale[NR_CPU_FANS] = {
+	100,
+	100,
+	97,		/* inlet fans run at 97% of exhaust fan */
+	97,
+	100,		/* updated later */
+	100,		/* updated later */
+};
+
+static struct wf_control *backside_fan;
+static struct wf_control *slots_fan;
+static struct wf_control *drive_bay_fan;
+
+/* PID loop state */
+static struct wf_cpu_pid_state cpu_pid[NR_CORES];
+static u32 cpu_thist[CPU_TEMP_HIST_SIZE];
+static int cpu_thist_pt;
+static s64 cpu_thist_total;
+static s32 cpu_all_tmax = 100 << 16;
+static int cpu_last_target;
+static struct wf_pid_state backside_pid;
+static int backside_tick;
+static struct wf_pid_state slots_pid;
+static int slots_started;
+static struct wf_pid_state drive_bay_pid;
+static int drive_bay_tick;
+
+static int nr_cores;
+static int have_all_controls;
+static int have_all_sensors;
+static int started;
+
+static int failure_state;
+#define FAILURE_SENSOR		1
+#define FAILURE_FAN		2
+#define FAILURE_PERM		4
+#define FAILURE_LOW_OVERTEMP	8
+#define FAILURE_HIGH_OVERTEMP	16
+
+/* Overtemp values */
+#define LOW_OVER_AVERAGE	0
+#define LOW_OVER_IMMEDIATE	(10 << 16)
+#define LOW_OVER_CLEAR		((-10) << 16)
+#define HIGH_OVER_IMMEDIATE	(14 << 16)
+#define HIGH_OVER_AVERAGE	(10 << 16)
+#define HIGH_OVER_IMMEDIATE	(14 << 16)
+
+
+/* Implementation... */
+static int create_cpu_loop(int cpu)
+{
+	int chip = cpu / 2;
+	int core = cpu & 1;
+	struct smu_sdbp_header *hdr;
+	struct smu_sdbp_cpupiddata *piddata;
+	struct wf_cpu_pid_param pid;
+	struct wf_control *main_fan = cpu_fans[0];
+	s32 tmax;
+	int fmin;
+
+	/* Get PID params from the appropriate SAT */
+	hdr = smu_sat_get_sdb_partition(chip, 0xC8 + core, NULL);
+	if (hdr == NULL) {
+		printk(KERN_WARNING"windfarm: can't get CPU PID fan config\n");
+		return -EINVAL;
+	}
+	piddata = (struct smu_sdbp_cpupiddata *)&hdr[1];
+
+	/* Get FVT params to get Tmax; if not found, assume default */
+	hdr = smu_sat_get_sdb_partition(chip, 0xC4 + core, NULL);
+	if (hdr) {
+		struct smu_sdbp_fvt *fvt = (struct smu_sdbp_fvt *)&hdr[1];
+		tmax = fvt->maxtemp << 16;
+	} else
+		tmax = 95 << 16;	/* default to 95 degrees C */
+
+	/* We keep a global tmax for overtemp calculations */
+	if (tmax < cpu_all_tmax)
+		cpu_all_tmax = tmax;
+
+	/*
+	 * Darwin has a minimum fan speed of 1000 rpm for the 4-way and
+	 * 515 for the 2-way.  That appears to be overkill, so for now,
+	 * impose a minimum of 750 or 515.
+	 */
+	fmin = (nr_cores > 2) ? 750 : 515;
+
+	/* Initialize PID loop */
+	pid.interval = 1;	/* seconds */
+	pid.history_len = piddata->history_len;
+	pid.gd = piddata->gd;
+	pid.gp = piddata->gp;
+	pid.gr = piddata->gr / piddata->history_len;
+	pid.pmaxadj = (piddata->max_power << 16) - (piddata->power_adj << 8);
+	pid.ttarget = tmax - (piddata->target_temp_delta << 16);
+	pid.tmax = tmax;
+	pid.min = main_fan->ops->get_min(main_fan);
+	pid.max = main_fan->ops->get_max(main_fan);
+	if (pid.min < fmin)
+		pid.min = fmin;
+
+	wf_cpu_pid_init(&cpu_pid[cpu], &pid);
+	return 0;
+}
+
+static void cpu_max_all_fans(void)
+{
+	int i;
+
+	/* We max all CPU fans in case of a sensor error. We also do the
+	 * cpufreq clamping now, even if it's supposedly done later by the
+	 * generic code anyway, we do it earlier here to react faster
+	 */
+	if (cpufreq_clamp)
+		wf_control_set_max(cpufreq_clamp);
+	for (i = 0; i < NR_CPU_FANS; ++i)
+		if (cpu_fans[i])
+			wf_control_set_max(cpu_fans[i]);
+}
+
+static int cpu_check_overtemp(s32 temp)
+{
+	int new_state = 0;
+	s32 t_avg, t_old;
+
+	/* First check for immediate overtemps */
+	if (temp >= (cpu_all_tmax + LOW_OVER_IMMEDIATE)) {
+		new_state |= FAILURE_LOW_OVERTEMP;
+		if ((failure_state & FAILURE_LOW_OVERTEMP) == 0)
+			printk(KERN_ERR "windfarm: Overtemp due to immediate CPU"
+			       " temperature !\n");
+	}
+	if (temp >= (cpu_all_tmax + HIGH_OVER_IMMEDIATE)) {
+		new_state |= FAILURE_HIGH_OVERTEMP;
+		if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0)
+			printk(KERN_ERR "windfarm: Critical overtemp due to"
+			       " immediate CPU temperature !\n");
+	}
+
+	/* We calculate a history of max temperatures and use that for the
+	 * overtemp management
+	 */
+	t_old = cpu_thist[cpu_thist_pt];
+	cpu_thist[cpu_thist_pt] = temp;
+	cpu_thist_pt = (cpu_thist_pt + 1) % CPU_TEMP_HIST_SIZE;
+	cpu_thist_total -= t_old;
+	cpu_thist_total += temp;
+	t_avg = cpu_thist_total / CPU_TEMP_HIST_SIZE;
+
+	DBG_LOTS("t_avg = %d.%03d (out: %d.%03d, in: %d.%03d)\n",
+		 FIX32TOPRINT(t_avg), FIX32TOPRINT(t_old), FIX32TOPRINT(temp));
+
+	/* Now check for average overtemps */
+	if (t_avg >= (cpu_all_tmax + LOW_OVER_AVERAGE)) {
+		new_state |= FAILURE_LOW_OVERTEMP;
+		if ((failure_state & FAILURE_LOW_OVERTEMP) == 0)
+			printk(KERN_ERR "windfarm: Overtemp due to average CPU"
+			       " temperature !\n");
+	}
+	if (t_avg >= (cpu_all_tmax + HIGH_OVER_AVERAGE)) {
+		new_state |= FAILURE_HIGH_OVERTEMP;
+		if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0)
+			printk(KERN_ERR "windfarm: Critical overtemp due to"
+			       " average CPU temperature !\n");
+	}
+
+	/* Now handle overtemp conditions. We don't currently use the windfarm
+	 * overtemp handling core as it's not fully suited to the needs of those
+	 * new machine. This will be fixed later.
+	 */
+	if (new_state) {
+		/* High overtemp -> immediate shutdown */
+		if (new_state & FAILURE_HIGH_OVERTEMP)
+			machine_power_off();
+		if ((failure_state & new_state) != new_state)
+			cpu_max_all_fans();
+		failure_state |= new_state;
+	} else if ((failure_state & FAILURE_LOW_OVERTEMP) &&
+		   (temp < (cpu_all_tmax + LOW_OVER_CLEAR))) {
+		printk(KERN_ERR "windfarm: Overtemp condition cleared !\n");
+		failure_state &= ~FAILURE_LOW_OVERTEMP;
+	}
+
+	return failure_state & (FAILURE_LOW_OVERTEMP | FAILURE_HIGH_OVERTEMP);
+}
+
+static void cpu_fans_tick(void)
+{
+	int err, cpu;
+	s32 greatest_delta = 0;
+	s32 temp, power, t_max = 0;
+	int i, t, target = 0;
+	struct wf_sensor *sr;
+	struct wf_control *ct;
+	struct wf_cpu_pid_state *sp;
+
+	DBG_LOTS(KERN_DEBUG);
+	for (cpu = 0; cpu < nr_cores; ++cpu) {
+		/* Get CPU core temperature */
+		sr = sens_cpu_temp[cpu];
+		err = sr->ops->get_value(sr, &temp);
+		if (err) {
+			DBG("\n");
+			printk(KERN_WARNING "windfarm: CPU %d temperature "
+			       "sensor error %d\n", cpu, err);
+			failure_state |= FAILURE_SENSOR;
+			cpu_max_all_fans();
+			return;
+		}
+
+		/* Keep track of highest temp */
+		t_max = max(t_max, temp);
+
+		/* Get CPU power */
+		sr = sens_cpu_power[cpu];
+		err = sr->ops->get_value(sr, &power);
+		if (err) {
+			DBG("\n");
+			printk(KERN_WARNING "windfarm: CPU %d power "
+			       "sensor error %d\n", cpu, err);
+			failure_state |= FAILURE_SENSOR;
+			cpu_max_all_fans();
+			return;
+		}
+
+		/* Run PID */
+		sp = &cpu_pid[cpu];
+		t = wf_cpu_pid_run(sp, power, temp);
+
+		if (cpu == 0 || sp->last_delta > greatest_delta) {
+			greatest_delta = sp->last_delta;
+			target = t;
+		}
+		DBG_LOTS("[%d] P=%d.%.3d T=%d.%.3d ",
+		    cpu, FIX32TOPRINT(power), FIX32TOPRINT(temp));
+	}
+	DBG_LOTS("fans = %d, t_max = %d.%03d\n", target, FIX32TOPRINT(t_max));
+
+	/* Darwin limits decrease to 20 per iteration */
+	if (target < (cpu_last_target - 20))
+		target = cpu_last_target - 20;
+	cpu_last_target = target;
+	for (cpu = 0; cpu < nr_cores; ++cpu)
+		cpu_pid[cpu].target = target;
+
+	/* Handle possible overtemps */
+	if (cpu_check_overtemp(t_max))
+		return;
+
+	/* Set fans */
+	for (i = 0; i < NR_CPU_FANS; ++i) {
+		ct = cpu_fans[i];
+		if (ct == NULL)
+			continue;
+		err = ct->ops->set_value(ct, target * cpu_fan_scale[i] / 100);
+		if (err) {
+			printk(KERN_WARNING "windfarm: fan %s reports "
+			       "error %d\n", ct->name, err);
+			failure_state |= FAILURE_FAN;
+			break;
+		}
+	}
+}
+
+/* Backside/U4 fan */
+static struct wf_pid_param backside_param = {
+	.interval	= 5,
+	.history_len	= 2,
+	.gd		= 48 << 20,
+	.gp		= 5 << 20,
+	.gr		= 0,
+	.itarget	= 64 << 16,
+	.additive	= 1,
+};
+
+static void backside_fan_tick(void)
+{
+	s32 temp;
+	int speed;
+	int err;
+
+	if (!backside_fan || !u4_temp)
+		return;
+	if (!backside_tick) {
+		/* first time; initialize things */
+		backside_param.min = backside_fan->ops->get_min(backside_fan);
+		backside_param.max = backside_fan->ops->get_max(backside_fan);
+		wf_pid_init(&backside_pid, &backside_param);
+		backside_tick = 1;
+	}
+	if (--backside_tick > 0)
+		return;
+	backside_tick = backside_pid.param.interval;
+
+	err = u4_temp->ops->get_value(u4_temp, &temp);
+	if (err) {
+		printk(KERN_WARNING "windfarm: U4 temp sensor error %d\n",
+		       err);
+		failure_state |= FAILURE_SENSOR;
+		wf_control_set_max(backside_fan);
+		return;
+	}
+	speed = wf_pid_run(&backside_pid, temp);
+	DBG_LOTS("backside PID temp=%d.%.3d speed=%d\n",
+		 FIX32TOPRINT(temp), speed);
+
+	err = backside_fan->ops->set_value(backside_fan, speed);
+	if (err) {
+		printk(KERN_WARNING "windfarm: backside fan error %d\n", err);
+		failure_state |= FAILURE_FAN;
+	}
+}
+
+/* Drive bay fan */
+static struct wf_pid_param drive_bay_prm = {
+	.interval	= 5,
+	.history_len	= 2,
+	.gd		= 30 << 20,
+	.gp		= 5 << 20,
+	.gr		= 0,
+	.itarget	= 40 << 16,
+	.additive	= 1,
+};
+
+static void drive_bay_fan_tick(void)
+{
+	s32 temp;
+	int speed;
+	int err;
+
+	if (!drive_bay_fan || !hd_temp)
+		return;
+	if (!drive_bay_tick) {
+		/* first time; initialize things */
+		drive_bay_prm.min = drive_bay_fan->ops->get_min(drive_bay_fan);
+		drive_bay_prm.max = drive_bay_fan->ops->get_max(drive_bay_fan);
+		wf_pid_init(&drive_bay_pid, &drive_bay_prm);
+		drive_bay_tick = 1;
+	}
+	if (--drive_bay_tick > 0)
+		return;
+	drive_bay_tick = drive_bay_pid.param.interval;
+
+	err = hd_temp->ops->get_value(hd_temp, &temp);
+	if (err) {
+		printk(KERN_WARNING "windfarm: drive bay temp sensor "
+		       "error %d\n", err);
+		failure_state |= FAILURE_SENSOR;
+		wf_control_set_max(drive_bay_fan);
+		return;
+	}
+	speed = wf_pid_run(&drive_bay_pid, temp);
+	DBG_LOTS("drive_bay PID temp=%d.%.3d speed=%d\n",
+		 FIX32TOPRINT(temp), speed);
+
+	err = drive_bay_fan->ops->set_value(drive_bay_fan, speed);
+	if (err) {
+		printk(KERN_WARNING "windfarm: drive bay fan error %d\n", err);
+		failure_state |= FAILURE_FAN;
+	}
+}
+
+/* PCI slots area fan */
+/* This makes the fan speed proportional to the power consumed */
+static struct wf_pid_param slots_param = {
+	.interval	= 1,
+	.history_len	= 2,
+	.gd		= 0,
+	.gp		= 0,
+	.gr		= 0x1277952,
+	.itarget	= 0,
+	.min		= 1560,
+	.max		= 3510,
+};
+
+static void slots_fan_tick(void)
+{
+	s32 power;
+	int speed;
+	int err;
+
+	if (!slots_fan || !slots_power)
+		return;
+	if (!slots_started) {
+		/* first time; initialize things */
+		wf_pid_init(&slots_pid, &slots_param);
+		slots_started = 1;
+	}
+
+	err = slots_power->ops->get_value(slots_power, &power);
+	if (err) {
+		printk(KERN_WARNING "windfarm: slots power sensor error %d\n",
+		       err);
+		failure_state |= FAILURE_SENSOR;
+		wf_control_set_max(slots_fan);
+		return;
+	}
+	speed = wf_pid_run(&slots_pid, power);
+	DBG_LOTS("slots PID power=%d.%.3d speed=%d\n",
+		 FIX32TOPRINT(power), speed);
+
+	err = slots_fan->ops->set_value(slots_fan, speed);
+	if (err) {
+		printk(KERN_WARNING "windfarm: slots fan error %d\n", err);
+		failure_state |= FAILURE_FAN;
+	}
+}
+
+static void set_fail_state(void)
+{
+	int i;
+
+	if (cpufreq_clamp)
+		wf_control_set_max(cpufreq_clamp);
+	for (i = 0; i < NR_CPU_FANS; ++i)
+		if (cpu_fans[i])
+			wf_control_set_max(cpu_fans[i]);
+	if (backside_fan)
+		wf_control_set_max(backside_fan);
+	if (slots_fan)
+		wf_control_set_max(slots_fan);
+	if (drive_bay_fan)
+		wf_control_set_max(drive_bay_fan);
+}
+
+static void pm112_tick(void)
+{
+	int i, last_failure;
+
+	if (!started) {
+		started = 1;
+		for (i = 0; i < nr_cores; ++i) {
+			if (create_cpu_loop(i) < 0) {
+				failure_state = FAILURE_PERM;
+				set_fail_state();
+				break;
+			}
+		}
+		DBG_LOTS("cpu_all_tmax=%d.%03d\n", FIX32TOPRINT(cpu_all_tmax));
+
+#ifdef HACKED_OVERTEMP
+		cpu_all_tmax = 60 << 16;
+#endif
+	}
+
+	/* Permanent failure, bail out */
+	if (failure_state & FAILURE_PERM)
+		return;
+	/* Clear all failure bits except low overtemp which will be eventually
+	 * cleared by the control loop itself
+	 */
+	last_failure = failure_state;
+	failure_state &= FAILURE_LOW_OVERTEMP;
+	cpu_fans_tick();
+	backside_fan_tick();
+	slots_fan_tick();
+	drive_bay_fan_tick();
+
+	DBG_LOTS("last_failure: 0x%x, failure_state: %x\n",
+		 last_failure, failure_state);
+
+	/* Check for failures. Any failure causes cpufreq clamping */
+	if (failure_state && last_failure == 0 && cpufreq_clamp)
+		wf_control_set_max(cpufreq_clamp);
+	if (failure_state == 0 && last_failure && cpufreq_clamp)
+		wf_control_set_min(cpufreq_clamp);
+
+	/* That's it for now, we might want to deal with other failures
+	 * differently in the future though
+	 */
+}
+
+static void pm112_new_control(struct wf_control *ct)
+{
+	int i, max_exhaust;
+
+	if (cpufreq_clamp == NULL && !strcmp(ct->name, "cpufreq-clamp")) {
+		if (wf_get_control(ct) == 0)
+			cpufreq_clamp = ct;
+	}
+
+	for (i = 0; i < NR_CPU_FANS; ++i) {
+		if (!strcmp(ct->name, cpu_fan_names[i])) {
+			if (cpu_fans[i] == NULL && wf_get_control(ct) == 0)
+				cpu_fans[i] = ct;
+			break;
+		}
+	}
+	if (i >= NR_CPU_FANS) {
+		/* not a CPU fan, try the others */
+		if (!strcmp(ct->name, "backside-fan")) {
+			if (backside_fan == NULL && wf_get_control(ct) == 0)
+				backside_fan = ct;
+		} else if (!strcmp(ct->name, "slots-fan")) {
+			if (slots_fan == NULL && wf_get_control(ct) == 0)
+				slots_fan = ct;
+		} else if (!strcmp(ct->name, "drive-bay-fan")) {
+			if (drive_bay_fan == NULL && wf_get_control(ct) == 0)
+				drive_bay_fan = ct;
+		}
+		return;
+	}
+
+	for (i = 0; i < CPU_FANS_REQD; ++i)
+		if (cpu_fans[i] == NULL)
+			return;
+
+	/* work out pump scaling factors */
+	max_exhaust = cpu_fans[0]->ops->get_max(cpu_fans[0]);
+	for (i = FIRST_PUMP; i <= LAST_PUMP; ++i)
+		if ((ct = cpu_fans[i]) != NULL)
+			cpu_fan_scale[i] =
+				ct->ops->get_max(ct) * 100 / max_exhaust;
+
+	have_all_controls = 1;
+}
+
+static void pm112_new_sensor(struct wf_sensor *sr)
+{
+	unsigned int i;
+
+	if (have_all_sensors)
+		return;
+	if (!strncmp(sr->name, "cpu-temp-", 9)) {
+		i = sr->name[9] - '0';
+		if (sr->name[10] == 0 && i < NR_CORES &&
+		    sens_cpu_temp[i] == NULL && wf_get_sensor(sr) == 0)
+			sens_cpu_temp[i] = sr;
+
+	} else if (!strncmp(sr->name, "cpu-power-", 10)) {
+		i = sr->name[10] - '0';
+		if (sr->name[11] == 0 && i < NR_CORES &&
+		    sens_cpu_power[i] == NULL && wf_get_sensor(sr) == 0)
+			sens_cpu_power[i] = sr;
+	} else if (!strcmp(sr->name, "hd-temp")) {
+		if (hd_temp == NULL && wf_get_sensor(sr) == 0)
+			hd_temp = sr;
+	} else if (!strcmp(sr->name, "slots-power")) {
+		if (slots_power == NULL && wf_get_sensor(sr) == 0)
+			slots_power = sr;
+	} else if (!strcmp(sr->name, "u4-temp")) {
+		if (u4_temp == NULL && wf_get_sensor(sr) == 0)
+			u4_temp = sr;
+	} else
+		return;
+
+	/* check if we have all the sensors we need */
+	for (i = 0; i < nr_cores; ++i)
+		if (sens_cpu_temp[i] == NULL || sens_cpu_power[i] == NULL)
+			return;
+
+	have_all_sensors = 1;
+}
+
+static int pm112_wf_notify(struct notifier_block *self,
+			   unsigned long event, void *data)
+{
+	switch (event) {
+	case WF_EVENT_NEW_SENSOR:
+		pm112_new_sensor(data);
+		break;
+	case WF_EVENT_NEW_CONTROL:
+		pm112_new_control(data);
+		break;
+	case WF_EVENT_TICK:
+		if (have_all_controls && have_all_sensors)
+			pm112_tick();
+	}
+	return 0;
+}
+
+static struct notifier_block pm112_events = {
+	.notifier_call = pm112_wf_notify,
+};
+
+static int wf_pm112_probe(struct device *dev)
+{
+	wf_register_client(&pm112_events);
+	return 0;
+}
+
+static int wf_pm112_remove(struct device *dev)
+{
+	wf_unregister_client(&pm112_events);
+	/* should release all sensors and controls */
+	return 0;
+}
+
+static struct device_driver wf_pm112_driver = {
+	.name = "windfarm",
+	.bus = &platform_bus_type,
+	.probe = wf_pm112_probe,
+	.remove = wf_pm112_remove,
+};
+
+static int __init wf_pm112_init(void)
+{
+	struct device_node *cpu;
+
+	if (!machine_is_compatible("PowerMac11,2"))
+		return -ENODEV;
+
+	/* Count the number of CPU cores */
+	nr_cores = 0;
+	for (cpu = NULL; (cpu = of_find_node_by_type(cpu, "cpu")) != NULL; )
+		++nr_cores;
+
+	printk(KERN_INFO "windfarm: initializing for dual-core desktop G5\n");
+	driver_register(&wf_pm112_driver);
+	return 0;
+}
+
+static void __exit wf_pm112_exit(void)
+{
+	driver_unregister(&wf_pm112_driver);
+}
+
+module_init(wf_pm112_init);
+module_exit(wf_pm112_exit);
+
+MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
+MODULE_DESCRIPTION("Thermal control for PowerMac11,2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c
index eb69a601e765..f1df6efcbe68 100644
--- a/drivers/macintosh/windfarm_pm81.c
+++ b/drivers/macintosh/windfarm_pm81.c
@@ -538,45 +538,6 @@ static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
 	}
 }
 
-
-/*
- * ****** Attributes ******
- *
- */
-
-#define BUILD_SHOW_FUNC_FIX(name, data)				\
-static ssize_t show_##name(struct device *dev,                  \
-			   struct device_attribute *attr,       \
-			   char *buf)	                        \
-{								\
-	ssize_t r;						\
-	s32 val = 0;                                            \
-	data->ops->get_value(data, &val);                       \
-	r = sprintf(buf, "%d.%03d", FIX32TOPRINT(val)); 	\
-	return r;						\
-}                                                               \
-static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
-
-
-#define BUILD_SHOW_FUNC_INT(name, data)				\
-static ssize_t show_##name(struct device *dev,                  \
-			   struct device_attribute *attr,       \
-			   char *buf)	                        \
-{								\
-	s32 val = 0;                                            \
-	data->ops->get_value(data, &val);                       \
-	return sprintf(buf, "%d", val);  			\
-}                                                               \
-static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
-
-BUILD_SHOW_FUNC_INT(cpu_fan, fan_cpu_main);
-BUILD_SHOW_FUNC_INT(sys_fan, fan_system);
-BUILD_SHOW_FUNC_INT(hd_fan, fan_hd);
-
-BUILD_SHOW_FUNC_FIX(cpu_temp, sensor_cpu_temp);
-BUILD_SHOW_FUNC_FIX(cpu_power, sensor_cpu_power);
-BUILD_SHOW_FUNC_FIX(hd_temp, sensor_hd_temp);
-
 /*
  * ****** Setup / Init / Misc ... ******
  *
@@ -654,17 +615,13 @@ static void wf_smu_new_control(struct wf_control *ct)
 		return;
 
 	if (fan_cpu_main == NULL && !strcmp(ct->name, "cpu-fan")) {
-		if (wf_get_control(ct) == 0) {
+		if (wf_get_control(ct) == 0)
 			fan_cpu_main = ct;
-			device_create_file(wf_smu_dev, &dev_attr_cpu_fan);
-		}
 	}
 
 	if (fan_system == NULL && !strcmp(ct->name, "system-fan")) {
-		if (wf_get_control(ct) == 0) {
+		if (wf_get_control(ct) == 0)
 			fan_system = ct;
-			device_create_file(wf_smu_dev, &dev_attr_sys_fan);
-		}
 	}
 
 	if (cpufreq_clamp == NULL && !strcmp(ct->name, "cpufreq-clamp")) {
@@ -683,10 +640,8 @@ static void wf_smu_new_control(struct wf_control *ct)
 	}
 
 	if (fan_hd == NULL && !strcmp(ct->name, "drive-bay-fan")) {
-		if (wf_get_control(ct) == 0) {
+		if (wf_get_control(ct) == 0)
 			fan_hd = ct;
-			device_create_file(wf_smu_dev, &dev_attr_hd_fan);
-		}
 	}
 
 	if (fan_system && fan_hd && fan_cpu_main && cpufreq_clamp)
@@ -699,24 +654,18 @@ static void wf_smu_new_sensor(struct wf_sensor *sr)
 		return;
 
 	if (sensor_cpu_power == NULL && !strcmp(sr->name, "cpu-power")) {
-		if (wf_get_sensor(sr) == 0) {
+		if (wf_get_sensor(sr) == 0)
 			sensor_cpu_power = sr;
-			device_create_file(wf_smu_dev, &dev_attr_cpu_power);
-		}
 	}
 
 	if (sensor_cpu_temp == NULL && !strcmp(sr->name, "cpu-temp")) {
-		if (wf_get_sensor(sr) == 0) {
+		if (wf_get_sensor(sr) == 0)
 			sensor_cpu_temp = sr;
-			device_create_file(wf_smu_dev, &dev_attr_cpu_temp);
-		}
 	}
 
 	if (sensor_hd_temp == NULL && !strcmp(sr->name, "hd-temp")) {
-		if (wf_get_sensor(sr) == 0) {
+		if (wf_get_sensor(sr) == 0)
 			sensor_hd_temp = sr;
-			device_create_file(wf_smu_dev, &dev_attr_hd_temp);
-		}
 	}
 
 	if (sensor_cpu_power && sensor_cpu_temp && sensor_hd_temp)
@@ -794,32 +743,20 @@ static int wf_smu_remove(struct device *ddev)
 	 * with that except by adding locks all over... I'll do that
 	 * eventually but heh, who ever rmmod this module anyway ?
 	 */
-	if (sensor_cpu_power) {
-		device_remove_file(wf_smu_dev, &dev_attr_cpu_power);
+	if (sensor_cpu_power)
 		wf_put_sensor(sensor_cpu_power);
-	}
-	if (sensor_cpu_temp) {
-		device_remove_file(wf_smu_dev, &dev_attr_cpu_temp);
+	if (sensor_cpu_temp)
 		wf_put_sensor(sensor_cpu_temp);
-	}
-	if (sensor_hd_temp) {
-		device_remove_file(wf_smu_dev, &dev_attr_hd_temp);
+	if (sensor_hd_temp)
 		wf_put_sensor(sensor_hd_temp);
-	}
 
 	/* Release all controls */
-	if (fan_cpu_main) {
-		device_remove_file(wf_smu_dev, &dev_attr_cpu_fan);
+	if (fan_cpu_main)
 		wf_put_control(fan_cpu_main);
-	}
-	if (fan_hd) {
-		device_remove_file(wf_smu_dev, &dev_attr_hd_fan);
+	if (fan_hd)
 		wf_put_control(fan_hd);
-	}
-	if (fan_system) {
-		device_remove_file(wf_smu_dev, &dev_attr_sys_fan);
+	if (fan_system)
 		wf_put_control(fan_system);
-	}
 	if (cpufreq_clamp)
 		wf_put_control(cpufreq_clamp);
 
diff --git a/drivers/macintosh/windfarm_pm91.c b/drivers/macintosh/windfarm_pm91.c
index 43243cf7410b..0d6372e96d32 100644
--- a/drivers/macintosh/windfarm_pm91.c
+++ b/drivers/macintosh/windfarm_pm91.c
@@ -458,45 +458,6 @@ static void wf_smu_slots_fans_tick(struct wf_smu_slots_fans_state *st)
 
 
 /*
- * ****** Attributes ******
- *
- */
-
-#define BUILD_SHOW_FUNC_FIX(name, data)				\
-static ssize_t show_##name(struct device *dev,                  \
-			   struct device_attribute *attr,       \
-			   char *buf)	                        \
-{								\
-	ssize_t r;						\
-	s32 val = 0;                                            \
-	data->ops->get_value(data, &val);                       \
-	r = sprintf(buf, "%d.%03d", FIX32TOPRINT(val)); 	\
-	return r;						\
-}                                                               \
-static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
-
-
-#define BUILD_SHOW_FUNC_INT(name, data)				\
-static ssize_t show_##name(struct device *dev,                  \
-			   struct device_attribute *attr,       \
-			   char *buf)	                        \
-{								\
-	s32 val = 0;                                            \
-	data->ops->get_value(data, &val);                       \
-	return sprintf(buf, "%d", val);  			\
-}                                                               \
-static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);
-
-BUILD_SHOW_FUNC_INT(cpu_fan, fan_cpu_main);
-BUILD_SHOW_FUNC_INT(hd_fan, fan_hd);
-BUILD_SHOW_FUNC_INT(slots_fan, fan_slots);
-
-BUILD_SHOW_FUNC_FIX(cpu_temp, sensor_cpu_temp);
-BUILD_SHOW_FUNC_FIX(cpu_power, sensor_cpu_power);
-BUILD_SHOW_FUNC_FIX(hd_temp, sensor_hd_temp);
-BUILD_SHOW_FUNC_FIX(slots_power, sensor_slots_power);
-
-/*
  * ****** Setup / Init / Misc ... ******
  *
  */
@@ -581,10 +542,8 @@ static void wf_smu_new_control(struct wf_control *ct)
 		return;
 
 	if (fan_cpu_main == NULL && !strcmp(ct->name, "cpu-rear-fan-0")) {
-		if (wf_get_control(ct) == 0) {
+		if (wf_get_control(ct) == 0)
 			fan_cpu_main = ct;
-			device_create_file(wf_smu_dev, &dev_attr_cpu_fan);
-		}
 	}
 
 	if (fan_cpu_second == NULL && !strcmp(ct->name, "cpu-rear-fan-1")) {
@@ -603,17 +562,13 @@ static void wf_smu_new_control(struct wf_control *ct)
 	}
 
 	if (fan_hd == NULL && !strcmp(ct->name, "drive-bay-fan")) {
-		if (wf_get_control(ct) == 0) {
+		if (wf_get_control(ct) == 0)
 			fan_hd = ct;
-			device_create_file(wf_smu_dev, &dev_attr_hd_fan);
-		}
 	}
 
 	if (fan_slots == NULL && !strcmp(ct->name, "slots-fan")) {
-		if (wf_get_control(ct) == 0) {
+		if (wf_get_control(ct) == 0)
 			fan_slots = ct;
-			device_create_file(wf_smu_dev, &dev_attr_slots_fan);
-		}
 	}
 
 	if (fan_cpu_main && (fan_cpu_second || fan_cpu_third) && fan_hd &&
@@ -627,31 +582,23 @@ static void wf_smu_new_sensor(struct wf_sensor *sr)
 		return;
 
 	if (sensor_cpu_power == NULL && !strcmp(sr->name, "cpu-power")) {
-		if (wf_get_sensor(sr) == 0) {
+		if (wf_get_sensor(sr) == 0)
 			sensor_cpu_power = sr;
-			device_create_file(wf_smu_dev, &dev_attr_cpu_power);
-		}
 	}
 
 	if (sensor_cpu_temp == NULL && !strcmp(sr->name, "cpu-temp")) {
-		if (wf_get_sensor(sr) == 0) {
+		if (wf_get_sensor(sr) == 0)
 			sensor_cpu_temp = sr;
-			device_create_file(wf_smu_dev, &dev_attr_cpu_temp);
-		}
 	}
 
 	if (sensor_hd_temp == NULL && !strcmp(sr->name, "hd-temp")) {
-		if (wf_get_sensor(sr) == 0) {
+		if (wf_get_sensor(sr) == 0)
 			sensor_hd_temp = sr;
-			device_create_file(wf_smu_dev, &dev_attr_hd_temp);
-		}
 	}
 
 	if (sensor_slots_power == NULL && !strcmp(sr->name, "slots-power")) {
-		if (wf_get_sensor(sr) == 0) {
+		if (wf_get_sensor(sr) == 0)
 			sensor_slots_power = sr;
-			device_create_file(wf_smu_dev, &dev_attr_slots_power);
-		}
 	}
 
 	if (sensor_cpu_power && sensor_cpu_temp &&
@@ -720,40 +667,26 @@ static int wf_smu_remove(struct device *ddev)
 	 * with that except by adding locks all over... I'll do that
 	 * eventually but heh, who ever rmmod this module anyway ?
 	 */
-	if (sensor_cpu_power) {
-		device_remove_file(wf_smu_dev, &dev_attr_cpu_power);
+	if (sensor_cpu_power)
 		wf_put_sensor(sensor_cpu_power);
-	}
-	if (sensor_cpu_temp) {
-		device_remove_file(wf_smu_dev, &dev_attr_cpu_temp);
+	if (sensor_cpu_temp)
 		wf_put_sensor(sensor_cpu_temp);
-	}
-	if (sensor_hd_temp) {
-		device_remove_file(wf_smu_dev, &dev_attr_hd_temp);
+	if (sensor_hd_temp)
 		wf_put_sensor(sensor_hd_temp);
-	}
-	if (sensor_slots_power) {
-		device_remove_file(wf_smu_dev, &dev_attr_slots_power);
+	if (sensor_slots_power)
 		wf_put_sensor(sensor_slots_power);
-	}
 
 	/* Release all controls */
-	if (fan_cpu_main) {
-		device_remove_file(wf_smu_dev, &dev_attr_cpu_fan);
+	if (fan_cpu_main)
 		wf_put_control(fan_cpu_main);
-	}
 	if (fan_cpu_second)
 		wf_put_control(fan_cpu_second);
 	if (fan_cpu_third)
 		wf_put_control(fan_cpu_third);
-	if (fan_hd) {
-		device_remove_file(wf_smu_dev, &dev_attr_hd_fan);
+	if (fan_hd)
 		wf_put_control(fan_hd);
-	}
-	if (fan_slots) {
-		device_remove_file(wf_smu_dev, &dev_attr_slots_fan);
+	if (fan_slots)
 		wf_put_control(fan_slots);
-	}
 	if (cpufreq_clamp)
 		wf_put_control(cpufreq_clamp);
 
diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c
index 4d811600bdab..a9e88edc0c72 100644
--- a/drivers/macintosh/windfarm_smu_controls.c
+++ b/drivers/macintosh/windfarm_smu_controls.c
@@ -24,7 +24,7 @@
 
 #include "windfarm.h"
 
-#define VERSION "0.3"
+#define VERSION "0.4"
 
 #undef DEBUG
 
@@ -34,6 +34,8 @@
 #define DBG(args...)	do { } while(0)
 #endif
 
+static int smu_supports_new_fans_ops = 1;
+
 /*
  * SMU fans control object
  */
@@ -59,23 +61,49 @@ static int smu_set_fan(int pwm, u8 id, u16 value)
 
 	/* Fill SMU command structure */
 	cmd.cmd = SMU_CMD_FAN_COMMAND;
-	cmd.data_len = 14;
+
+	/* The SMU has an "old" and a "new" way of setting the fan speed
+	 * Unfortunately, I found no reliable way to know which one works
+	 * on a given machine model. After some investigations it appears
+	 * that MacOS X just tries the new one, and if it fails fallbacks
+	 * to the old ones ... Ugh.
+	 */
+ retry:
+	if (smu_supports_new_fans_ops) {
+		buffer[0] = 0x30;
+		buffer[1] = id;
+		*((u16 *)(&buffer[2])) = value;
+		cmd.data_len = 4;
+	} else {
+		if (id > 7)
+			return -EINVAL;
+		/* Fill argument buffer */
+		memset(buffer, 0, 16);
+		buffer[0] = pwm ? 0x10 : 0x00;
+		buffer[1] = 0x01 << id;
+		*((u16 *)&buffer[2 + id * 2]) = value;
+		cmd.data_len = 14;
+	}
+
 	cmd.reply_len = 16;
 	cmd.data_buf = cmd.reply_buf = buffer;
 	cmd.status = 0;
 	cmd.done = smu_done_complete;
 	cmd.misc = &comp;
 
-	/* Fill argument buffer */
-	memset(buffer, 0, 16);
-	buffer[0] = pwm ? 0x10 : 0x00;
-	buffer[1] = 0x01 << id;
-	*((u16 *)&buffer[2 + id * 2]) = value;
-
 	rc = smu_queue_cmd(&cmd);
 	if (rc)
 		return rc;
 	wait_for_completion(&comp);
+
+	/* Handle fallback (see coment above) */
+	if (cmd.status != 0 && smu_supports_new_fans_ops) {
+		printk(KERN_WARNING "windfarm: SMU failed new fan command "
+		       "falling back to old method\n");
+		smu_supports_new_fans_ops = 0;
+		goto retry;
+	}
+
 	return cmd.status;
 }
 
@@ -158,19 +186,29 @@ static struct smu_fan_control *smu_fan_create(struct device_node *node,
 
 	/* Names used on desktop models */
 	if (!strcmp(l, "Rear Fan 0") || !strcmp(l, "Rear Fan") ||
-	    !strcmp(l, "Rear fan 0") || !strcmp(l, "Rear fan"))
+	    !strcmp(l, "Rear fan 0") || !strcmp(l, "Rear fan") ||
+	    !strcmp(l, "CPU A EXHAUST"))
 		fct->ctrl.name = "cpu-rear-fan-0";
-	else if (!strcmp(l, "Rear Fan 1") || !strcmp(l, "Rear fan 1"))
+	else if (!strcmp(l, "Rear Fan 1") || !strcmp(l, "Rear fan 1") ||
+		 !strcmp(l, "CPU B EXHAUST"))
 		fct->ctrl.name = "cpu-rear-fan-1";
 	else if (!strcmp(l, "Front Fan 0") || !strcmp(l, "Front Fan") ||
-		 !strcmp(l, "Front fan 0") || !strcmp(l, "Front fan"))
+		 !strcmp(l, "Front fan 0") || !strcmp(l, "Front fan") ||
+		 !strcmp(l, "CPU A INTAKE"))
 		fct->ctrl.name = "cpu-front-fan-0";
-	else if (!strcmp(l, "Front Fan 1") || !strcmp(l, "Front fan 1"))
+	else if (!strcmp(l, "Front Fan 1") || !strcmp(l, "Front fan 1") ||
+		 !strcmp(l, "CPU B INTAKE"))
 		fct->ctrl.name = "cpu-front-fan-1";
-	else if (!strcmp(l, "Slots Fan") || !strcmp(l, "Slots fan"))
+	else if (!strcmp(l, "CPU A PUMP"))
+		fct->ctrl.name = "cpu-pump-0";
+	else if (!strcmp(l, "Slots Fan") || !strcmp(l, "Slots fan") ||
+		 !strcmp(l, "EXPANSION SLOTS INTAKE"))
 		fct->ctrl.name = "slots-fan";
-	else if (!strcmp(l, "Drive Bay") || !strcmp(l, "Drive bay"))
+	else if (!strcmp(l, "Drive Bay") || !strcmp(l, "Drive bay") ||
+		 !strcmp(l, "DRIVE BAY A INTAKE"))
 		fct->ctrl.name = "drive-bay-fan";
+	else if (!strcmp(l, "BACKSIDE"))
+		fct->ctrl.name = "backside-fan";
 
 	/* Names used on iMac models */
 	if (!strcmp(l, "System Fan") || !strcmp(l, "System fan"))
@@ -223,7 +261,8 @@ static int __init smu_controls_init(void)
 
 	/* Look for RPM fans */
 	for (fans = NULL; (fans = of_get_next_child(smu, fans)) != NULL;)
-		if (!strcmp(fans->name, "rpm-fans"))
+		if (!strcmp(fans->name, "rpm-fans") ||
+		    device_is_compatible(fans, "smu-rpm-fans"))
 			break;
 	for (fan = NULL;
 	     fans && (fan = of_get_next_child(fans, fan)) != NULL;) {
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
new file mode 100644
index 000000000000..3a32c59494f2
--- /dev/null
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -0,0 +1,418 @@
+/*
+ * Windfarm PowerMac thermal control.  SMU "satellite" controller sensors.
+ *
+ * Copyright (C) 2005 Paul Mackerras, IBM Corp. <paulus@samba.org>
+ *
+ * Released under the terms of the GNU GPL v2.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>
+#include <asm/semaphore.h>
+#include <asm/prom.h>
+#include <asm/smu.h>
+#include <asm/pmac_low_i2c.h>
+
+#include "windfarm.h"
+
+#define VERSION "0.2"
+
+#define DEBUG
+
+#ifdef DEBUG
+#define DBG(args...)	printk(args)
+#else
+#define DBG(args...)	do { } while(0)
+#endif
+
+/* If the cache is older than 800ms we'll refetch it */
+#define MAX_AGE		msecs_to_jiffies(800)
+
+struct wf_sat {
+	int			nr;
+	atomic_t		refcnt;
+	struct semaphore	mutex;
+	unsigned long		last_read; /* jiffies when cache last updated */
+	u8			cache[16];
+	struct i2c_client	i2c;
+	struct device_node	*node;
+};
+
+static struct wf_sat *sats[2];
+
+struct wf_sat_sensor {
+	int		index;
+	int		index2;		/* used for power sensors */
+	int		shift;
+	struct wf_sat	*sat;
+	struct wf_sensor sens;
+};
+
+#define wf_to_sat(c)	container_of(c, struct wf_sat_sensor, sens)
+#define i2c_to_sat(c)	container_of(c, struct wf_sat, i2c)
+
+static int wf_sat_attach(struct i2c_adapter *adapter);
+static int wf_sat_detach(struct i2c_client *client);
+
+static struct i2c_driver wf_sat_driver = {
+	.driver = {
+		.name		= "wf_smu_sat",
+	},
+	.attach_adapter	= wf_sat_attach,
+	.detach_client	= wf_sat_detach,
+};
+
+/*
+ * XXX i2c_smbus_read_i2c_block_data doesn't pass the requested
+ * length down to the low-level driver, so we use this, which
+ * works well enough with the SMU i2c driver code...
+ */
+static int sat_read_block(struct i2c_client *client, u8 command,
+			  u8 *values, int len)
+{
+	union i2c_smbus_data data;
+	int err;
+
+	data.block[0] = len;
+	err = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			     I2C_SMBUS_READ, command, I2C_SMBUS_I2C_BLOCK_DATA,
+			     &data);
+	if (!err)
+		memcpy(values, data.block, len);
+	return err;
+}
+
+struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
+						  unsigned int *size)
+{
+	struct wf_sat *sat;
+	int err;
+	unsigned int i, len;
+	u8 *buf;
+	u8 data[4];
+
+	/* TODO: Add the resulting partition to the device-tree */
+
+	if (sat_id > 1 || (sat = sats[sat_id]) == NULL)
+		return NULL;
+
+	err = i2c_smbus_write_word_data(&sat->i2c, 8, id << 8);
+	if (err) {
+		printk(KERN_ERR "smu_sat_get_sdb_part wr error %d\n", err);
+		return NULL;
+	}
+
+	len = i2c_smbus_read_word_data(&sat->i2c, 9);
+	if (len < 0) {
+		printk(KERN_ERR "smu_sat_get_sdb_part rd len error\n");
+		return NULL;
+	}
+	if (len == 0) {
+		printk(KERN_ERR "smu_sat_get_sdb_part no partition %x\n", id);
+		return NULL;
+	}
+
+	len = le16_to_cpu(len);
+	len = (len + 3) & ~3;
+	buf = kmalloc(len, GFP_KERNEL);
+	if (buf == NULL)
+		return NULL;
+
+	for (i = 0; i < len; i += 4) {
+		err = sat_read_block(&sat->i2c, 0xa, data, 4);
+		if (err) {
+			printk(KERN_ERR "smu_sat_get_sdb_part rd err %d\n",
+			       err);
+			goto fail;
+		}
+		buf[i] = data[1];
+		buf[i+1] = data[0];
+		buf[i+2] = data[3];
+		buf[i+3] = data[2];
+	}
+#ifdef DEBUG
+	DBG(KERN_DEBUG "sat %d partition %x:", sat_id, id);
+	for (i = 0; i < len; ++i)
+		DBG(" %x", buf[i]);
+	DBG("\n");
+#endif
+
+	if (size)
+		*size = len;
+	return (struct smu_sdbp_header *) buf;
+
+ fail:
+	kfree(buf);
+	return NULL;
+}
+
+/* refresh the cache */
+static int wf_sat_read_cache(struct wf_sat *sat)
+{
+	int err;
+
+	err = sat_read_block(&sat->i2c, 0x3f, sat->cache, 16);
+	if (err)
+		return err;
+	sat->last_read = jiffies;
+#ifdef LOTSA_DEBUG
+	{
+		int i;
+		DBG(KERN_DEBUG "wf_sat_get: data is");
+		for (i = 0; i < 16; ++i)
+			DBG(" %.2x", sat->cache[i]);
+		DBG("\n");
+	}
+#endif
+	return 0;
+}
+
+static int wf_sat_get(struct wf_sensor *sr, s32 *value)
+{
+	struct wf_sat_sensor *sens = wf_to_sat(sr);
+	struct wf_sat *sat = sens->sat;
+	int i, err;
+	s32 val;
+
+	if (sat->i2c.adapter == NULL)
+		return -ENODEV;
+
+	down(&sat->mutex);
+	if (time_after(jiffies, (sat->last_read + MAX_AGE))) {
+		err = wf_sat_read_cache(sat);
+		if (err)
+			goto fail;
+	}
+
+	i = sens->index * 2;
+	val = ((sat->cache[i] << 8) + sat->cache[i+1]) << sens->shift;
+	if (sens->index2 >= 0) {
+		i = sens->index2 * 2;
+		/* 4.12 * 8.8 -> 12.20; shift right 4 to get 16.16 */
+		val = (val * ((sat->cache[i] << 8) + sat->cache[i+1])) >> 4;
+	}
+
+	*value = val;
+	err = 0;
+
+ fail:
+	up(&sat->mutex);
+	return err;
+}
+
+static void wf_sat_release(struct wf_sensor *sr)
+{
+	struct wf_sat_sensor *sens = wf_to_sat(sr);
+	struct wf_sat *sat = sens->sat;
+
+	if (atomic_dec_and_test(&sat->refcnt)) {
+		if (sat->i2c.adapter) {
+			i2c_detach_client(&sat->i2c);
+			sat->i2c.adapter = NULL;
+		}
+		if (sat->nr >= 0)
+			sats[sat->nr] = NULL;
+		kfree(sat);
+	}
+	kfree(sens);
+}
+
+static struct wf_sensor_ops wf_sat_ops = {
+	.get_value	= wf_sat_get,
+	.release	= wf_sat_release,
+	.owner		= THIS_MODULE,
+};
+
+static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
+{
+	struct wf_sat *sat;
+	struct wf_sat_sensor *sens;
+	u32 *reg;
+	char *loc, *type;
+	u8 addr, chip, core;
+	struct device_node *child;
+	int shift, cpu, index;
+	char *name;
+	int vsens[2], isens[2];
+
+	reg = (u32 *) get_property(dev, "reg", NULL);
+	if (reg == NULL)
+		return;
+	addr = *reg;
+	DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr);
+
+	sat = kzalloc(sizeof(struct wf_sat), GFP_KERNEL);
+	if (sat == NULL)
+		return;
+	sat->nr = -1;
+	sat->node = of_node_get(dev);
+	atomic_set(&sat->refcnt, 0);
+	init_MUTEX(&sat->mutex);
+	sat->i2c.addr = (addr >> 1) & 0x7f;
+	sat->i2c.adapter = adapter;
+	sat->i2c.driver = &wf_sat_driver;
+	strncpy(sat->i2c.name, "smu-sat", I2C_NAME_SIZE-1);
+
+	if (i2c_attach_client(&sat->i2c)) {
+		printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n");
+		goto fail;
+	}
+
+	vsens[0] = vsens[1] = -1;
+	isens[0] = isens[1] = -1;
+	child = NULL;
+	while ((child = of_get_next_child(dev, child)) != NULL) {
+		reg = (u32 *) get_property(child, "reg", NULL);
+		type = get_property(child, "device_type", NULL);
+		loc = get_property(child, "location", NULL);
+		if (reg == NULL || loc == NULL)
+			continue;
+
+		/* the cooked sensors are between 0x30 and 0x37 */
+		if (*reg < 0x30 || *reg > 0x37)
+			continue;
+		index = *reg - 0x30;
+
+		/* expect location to be CPU [AB][01] ... */
+		if (strncmp(loc, "CPU ", 4) != 0)
+			continue;
+		chip = loc[4] - 'A';
+		core = loc[5] - '0';
+		if (chip > 1 || core > 1) {
+			printk(KERN_ERR "wf_sat_create: don't understand "
+			       "location %s for %s\n", loc, child->full_name);
+			continue;
+		}
+		cpu = 2 * chip + core;
+		if (sat->nr < 0)
+			sat->nr = chip;
+		else if (sat->nr != chip) {
+			printk(KERN_ERR "wf_sat_create: can't cope with "
+			       "multiple CPU chips on one SAT (%s)\n", loc);
+			continue;
+		}
+
+		if (strcmp(type, "voltage-sensor") == 0) {
+			name = "cpu-voltage";
+			shift = 4;
+			vsens[core] = index;
+		} else if (strcmp(type, "current-sensor") == 0) {
+			name = "cpu-current";
+			shift = 8;
+			isens[core] = index;
+		} else if (strcmp(type, "temp-sensor") == 0) {
+			name = "cpu-temp";
+			shift = 10;
+		} else
+			continue;	/* hmmm shouldn't happen */
+
+		/* the +16 is enough for "cpu-voltage-n" */
+		sens = kzalloc(sizeof(struct wf_sat_sensor) + 16, GFP_KERNEL);
+		if (sens == NULL) {
+			printk(KERN_ERR "wf_sat_create: couldn't create "
+			       "%s sensor %d (no memory)\n", name, cpu);
+			continue;
+		}
+		sens->index = index;
+		sens->index2 = -1;
+		sens->shift = shift;
+		sens->sat = sat;
+		atomic_inc(&sat->refcnt);
+		sens->sens.ops = &wf_sat_ops;
+		sens->sens.name = (char *) (sens + 1);
+		snprintf(sens->sens.name, 16, "%s-%d", name, cpu);
+
+		if (wf_register_sensor(&sens->sens)) {
+			atomic_dec(&sat->refcnt);
+			kfree(sens);
+		}
+	}
+
+	/* make the power sensors */
+	for (core = 0; core < 2; ++core) {
+		if (vsens[core] < 0 || isens[core] < 0)
+			continue;
+		cpu = 2 * sat->nr + core;
+		sens = kzalloc(sizeof(struct wf_sat_sensor) + 16, GFP_KERNEL);
+		if (sens == NULL) {
+			printk(KERN_ERR "wf_sat_create: couldn't create power "
+			       "sensor %d (no memory)\n", cpu);
+			continue;
+		}
+		sens->index = vsens[core];
+		sens->index2 = isens[core];
+		sens->shift = 0;
+		sens->sat = sat;
+		atomic_inc(&sat->refcnt);
+		sens->sens.ops = &wf_sat_ops;
+		sens->sens.name = (char *) (sens + 1);
+		snprintf(sens->sens.name, 16, "cpu-power-%d", cpu);
+
+		if (wf_register_sensor(&sens->sens)) {
+			atomic_dec(&sat->refcnt);
+			kfree(sens);
+		}
+	}
+
+	if (sat->nr >= 0)
+		sats[sat->nr] = sat;
+
+	return;
+
+ fail:
+	kfree(sat);
+}
+
+static int wf_sat_attach(struct i2c_adapter *adapter)
+{
+	struct device_node *busnode, *dev = NULL;
+	struct pmac_i2c_bus *bus;
+
+	bus = pmac_i2c_adapter_to_bus(adapter);
+	if (bus == NULL)
+		return -ENODEV;
+	busnode = pmac_i2c_get_bus_node(bus);
+
+	while ((dev = of_get_next_child(busnode, dev)) != NULL)
+		if (device_is_compatible(dev, "smu-sat"))
+			wf_sat_create(adapter, dev);
+	return 0;
+}
+
+static int wf_sat_detach(struct i2c_client *client)
+{
+	struct wf_sat *sat = i2c_to_sat(client);
+
+	/* XXX TODO */
+
+	sat->i2c.adapter = NULL;
+	return 0;
+}
+
+static int __init sat_sensors_init(void)
+{
+	int err;
+
+	err = i2c_add_driver(&wf_sat_driver);
+	if (err < 0)
+		return err;
+	return 0;
+}
+
+static void __exit sat_sensors_exit(void)
+{
+	i2c_del_driver(&wf_sat_driver);
+}
+
+module_init(sat_sensors_init);
+/*module_exit(sat_sensors_exit); Uncomment when cleanup is implemented */
+
+MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
+MODULE_DESCRIPTION("SMU satellite sensors for PowerMac thermal control");
+MODULE_LICENSE("GPL");
diff --git a/drivers/macintosh/windfarm_smu_sensors.c b/drivers/macintosh/windfarm_smu_sensors.c
index 1a00d9c75a23..bed25dcf8a1e 100644
--- a/drivers/macintosh/windfarm_smu_sensors.c
+++ b/drivers/macintosh/windfarm_smu_sensors.c
@@ -220,14 +220,29 @@ static struct smu_ad_sensor *smu_ads_create(struct device_node *node)
 	    !strcmp(l, "CPU T-Diode")) {
 		ads->sens.ops = &smu_cputemp_ops;
 		ads->sens.name = "cpu-temp";
+		if (cpudiode == NULL) {
+			DBG("wf: cpudiode partition (%02x) not found\n",
+			    SMU_SDB_CPUDIODE_ID);
+			goto fail;
+		}
 	} else if (!strcmp(c, "current-sensor") &&
 		   !strcmp(l, "CPU Current")) {
 		ads->sens.ops = &smu_cpuamp_ops;
 		ads->sens.name = "cpu-current";
+		if (cpuvcp == NULL) {
+			DBG("wf: cpuvcp partition (%02x) not found\n",
+			    SMU_SDB_CPUVCP_ID);
+			goto fail;
+		}
 	} else if (!strcmp(c, "voltage-sensor") &&
 		   !strcmp(l, "CPU Voltage")) {
 		ads->sens.ops = &smu_cpuvolt_ops;
 		ads->sens.name = "cpu-voltage";
+		if (cpuvcp == NULL) {
+			DBG("wf: cpuvcp partition (%02x) not found\n",
+			    SMU_SDB_CPUVCP_ID);
+			goto fail;
+		}
 	} else if (!strcmp(c, "power-sensor") &&
 		   !strcmp(l, "Slots Power")) {
 		ads->sens.ops = &smu_slotspow_ops;
@@ -365,29 +380,22 @@ smu_cpu_power_create(struct wf_sensor *volts, struct wf_sensor *amps)
 	return NULL;
 }
 
-static int smu_fetch_param_partitions(void)
+static void smu_fetch_param_partitions(void)
 {
 	struct smu_sdbp_header *hdr;
 
 	/* Get CPU voltage/current/power calibration data */
 	hdr = smu_get_sdb_partition(SMU_SDB_CPUVCP_ID, NULL);
-	if (hdr == NULL) {
-		DBG("wf: cpuvcp partition (%02x) not found\n",
-		    SMU_SDB_CPUVCP_ID);
-		return -ENODEV;
+	if (hdr != NULL) {
+		cpuvcp = (struct smu_sdbp_cpuvcp *)&hdr[1];
+		/* Keep version around */
+		cpuvcp_version = hdr->version;
 	}
-	cpuvcp = (struct smu_sdbp_cpuvcp *)&hdr[1];
-	/* Keep version around */
-	cpuvcp_version = hdr->version;
 
 	/* Get CPU diode calibration data */
 	hdr = smu_get_sdb_partition(SMU_SDB_CPUDIODE_ID, NULL);
-	if (hdr == NULL) {
-		DBG("wf: cpudiode partition (%02x) not found\n",
-		    SMU_SDB_CPUDIODE_ID);
-		return -ENODEV;
-	}
-	cpudiode = (struct smu_sdbp_cpudiode *)&hdr[1];
+	if (hdr != NULL)
+		cpudiode = (struct smu_sdbp_cpudiode *)&hdr[1];
 
 	/* Get slots power calibration data if any */
 	hdr = smu_get_sdb_partition(SMU_SDB_SLOTSPOW_ID, NULL);
@@ -398,23 +406,18 @@ static int smu_fetch_param_partitions(void)
 	hdr = smu_get_sdb_partition(SMU_SDB_DEBUG_SWITCHES_ID, NULL);
 	if (hdr != NULL)
 		debugswitches = (u8 *)&hdr[1];
-
-	return 0;
 }
 
 static int __init smu_sensors_init(void)
 {
 	struct device_node *smu, *sensors, *s;
 	struct smu_ad_sensor *volt_sensor = NULL, *curr_sensor = NULL;
-	int rc;
 
 	if (!smu_present())
 		return -ENODEV;
 
 	/* Get parameters partitions */
-	rc = smu_fetch_param_partitions();
-	if (rc)
-		return rc;
+	smu_fetch_param_partitions();
 
 	smu = of_find_node_by_type(NULL, "smu");
 	if (smu == NULL)
diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c
index 74039db846ba..d73779a42417 100644
--- a/drivers/md/dm-log.c
+++ b/drivers/md/dm-log.c
@@ -545,7 +545,8 @@ static int core_get_resync_work(struct dirty_log *log, region_t *region)
 		return 0;
 
 	do {
-		*region = find_next_zero_bit((unsigned long *) lc->sync_bits,
+		*region = ext2_find_next_zero_bit(
+					     (unsigned long *) lc->sync_bits,
 					     lc->region_count,
 					     lc->sync_search);
 		lc->sync_search = *region + 1;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 7145cd150f7b..d05e3125d298 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1024,7 +1024,7 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
 		rdev-> sb_size = (rdev->sb_size | bmask)+1;
 
 	if (refdev == 0)
-		return 1;
+		ret = 1;
 	else {
 		__u64 ev1, ev2;
 		struct mdp_superblock_1 *refsb = 
@@ -1044,7 +1044,9 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
 		ev2 = le64_to_cpu(refsb->events);
 
 		if (ev1 > ev2)
-			return 1;
+			ret = 1;
+		else
+			ret = 0;
 	}
 	if (minor_version) 
 		rdev->size = ((rdev->bdev->bd_inode->i_size>>9) - le64_to_cpu(sb->data_offset)) / 2;
@@ -1058,7 +1060,7 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
 
 	if (le32_to_cpu(sb->size) > rdev->size*2)
 		return -EINVAL;
-	return 0;
+	return ret;
 }
 
 static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
@@ -1081,7 +1083,7 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 		mddev->size = le64_to_cpu(sb->size)/2;
 		mddev->events = le64_to_cpu(sb->events);
 		mddev->bitmap_offset = 0;
-		mddev->default_bitmap_offset = 1024;
+		mddev->default_bitmap_offset = 1024 >> 9;
 		
 		mddev->recovery_cp = le64_to_cpu(sb->resync_offset);
 		memcpy(mddev->uuid, sb->set_uuid, 16);
@@ -1161,6 +1163,9 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev)
 
 	sb->cnt_corrected_read = atomic_read(&rdev->corrected_errors);
 
+	sb->raid_disks = cpu_to_le32(mddev->raid_disks);
+	sb->size = cpu_to_le64(mddev->size<<1);
+
 	if (mddev->bitmap && mddev->bitmap_file == NULL) {
 		sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_offset);
 		sb->feature_map = cpu_to_le32(MD_FEATURE_BITMAP_OFFSET);
@@ -2686,14 +2691,6 @@ static int do_md_stop(mddev_t * mddev, int ro)
 			set_disk_ro(disk, 1);
 	}
 
-	bitmap_destroy(mddev);
-	if (mddev->bitmap_file) {
-		atomic_set(&mddev->bitmap_file->f_dentry->d_inode->i_writecount, 1);
-		fput(mddev->bitmap_file);
-		mddev->bitmap_file = NULL;
-	}
-	mddev->bitmap_offset = 0;
-
 	/*
 	 * Free resources if final stop
 	 */
@@ -2703,6 +2700,14 @@ static int do_md_stop(mddev_t * mddev, int ro)
 		struct gendisk *disk;
 		printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
 
+		bitmap_destroy(mddev);
+		if (mddev->bitmap_file) {
+			atomic_set(&mddev->bitmap_file->f_dentry->d_inode->i_writecount, 1);
+			fput(mddev->bitmap_file);
+			mddev->bitmap_file = NULL;
+		}
+		mddev->bitmap_offset = 0;
+
 		ITERATE_RDEV(mddev,rdev,tmp)
 			if (rdev->raid_disk >= 0) {
 				char nm[20];
@@ -2939,6 +2944,8 @@ static int get_array_info(mddev_t * mddev, void __user * arg)
 	info.ctime         = mddev->ctime;
 	info.level         = mddev->level;
 	info.size          = mddev->size;
+	if (info.size != mddev->size) /* overflow */
+		info.size = -1;
 	info.nr_disks      = nr;
 	info.raid_disks    = mddev->raid_disks;
 	info.md_minor      = mddev->md_minor;
@@ -3465,7 +3472,7 @@ static int update_size(mddev_t *mddev, unsigned long size)
 		bdev = bdget_disk(mddev->gendisk, 0);
 		if (bdev) {
 			mutex_lock(&bdev->bd_inode->i_mutex);
-			i_size_write(bdev->bd_inode, mddev->array_size << 10);
+			i_size_write(bdev->bd_inode, (loff_t)mddev->array_size << 10);
 			mutex_unlock(&bdev->bd_inode->i_mutex);
 			bdput(bdev);
 		}
@@ -3485,17 +3492,6 @@ static int update_raid_disks(mddev_t *mddev, int raid_disks)
 	if (mddev->sync_thread)
 		return -EBUSY;
 	rv = mddev->pers->reshape(mddev, raid_disks);
-	if (!rv) {
-		struct block_device *bdev;
-
-		bdev = bdget_disk(mddev->gendisk, 0);
-		if (bdev) {
-			mutex_lock(&bdev->bd_inode->i_mutex);
-			i_size_write(bdev->bd_inode, mddev->array_size << 10);
-			mutex_unlock(&bdev->bd_inode->i_mutex);
-			bdput(bdev);
-		}
-	}
 	return rv;
 }
 
@@ -3531,7 +3527,7 @@ static int update_array_info(mddev_t *mddev, mdu_array_info_t *info)
 		)
 		return -EINVAL;
 	/* Check there is only one change */
-	if (mddev->size != info->size) cnt++;
+	if (info->size >= 0 && mddev->size != info->size) cnt++;
 	if (mddev->raid_disks != info->raid_disks) cnt++;
 	if (mddev->layout != info->layout) cnt++;
 	if ((state ^ info->state) & (1<<MD_SB_BITMAP_PRESENT)) cnt++;
@@ -3548,7 +3544,7 @@ static int update_array_info(mddev_t *mddev, mdu_array_info_t *info)
 		else
 			return mddev->pers->reconfig(mddev, info->layout, -1);
 	}
-	if (mddev->size != info->size)
+	if (info->size >= 0 && mddev->size != info->size)
 		rv = update_size(mddev, info->size);
 
 	if (mddev->raid_disks    != info->raid_disks)
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index d03f99cf4b7d..678f4dbbea1d 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -372,7 +372,7 @@ out_free_conf:
 	kfree(conf);
 	mddev->private = NULL;
 out:
-	return 1;
+	return -ENOMEM;
 }
 
 static int raid0_stop (mddev_t *mddev)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 9130d051b474..ab90a6d12020 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -565,6 +565,8 @@ rb_out:
 
 	if (disk >= 0 && (rdev=rcu_dereference(conf->mirrors[disk].rdev))!= NULL)
 		atomic_inc(&conf->mirrors[disk].rdev->nr_pending);
+	else
+		disk = -1;
 	rcu_read_unlock();
 
 	return disk;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 25976bfb6f9c..2dba305daf3c 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -350,7 +350,8 @@ static void shrink_stripes(raid5_conf_t *conf)
 	while (drop_one_stripe(conf))
 		;
 
-	kmem_cache_destroy(conf->slab_cache);
+	if (conf->slab_cache)
+		kmem_cache_destroy(conf->slab_cache);
 	conf->slab_cache = NULL;
 }
 
diff --git a/drivers/md/raid6main.c b/drivers/md/raid6main.c
index f618a53b98be..cd477ebf2ee4 100644
--- a/drivers/md/raid6main.c
+++ b/drivers/md/raid6main.c
@@ -115,7 +115,7 @@ static void __release_stripe(raid6_conf_t *conf, struct stripe_head *sh)
 			list_add_tail(&sh->lru, &conf->inactive_list);
 			atomic_dec(&conf->active_stripes);
 			if (!conf->inactive_blocked ||
-			    atomic_read(&conf->active_stripes) < (NR_STRIPES*3/4))
+			    atomic_read(&conf->active_stripes) < (conf->max_nr_stripes*3/4))
 				wake_up(&conf->wait_for_stripe);
 		}
 	}
@@ -273,7 +273,8 @@ static struct stripe_head *get_active_stripe(raid6_conf_t *conf, sector_t sector
 				conf->inactive_blocked = 1;
 				wait_event_lock_irq(conf->wait_for_stripe,
 						    !list_empty(&conf->inactive_list) &&
-						    (atomic_read(&conf->active_stripes) < (NR_STRIPES *3/4)
+						    (atomic_read(&conf->active_stripes)
+						     < (conf->max_nr_stripes *3/4)
 						     || !conf->inactive_blocked),
 						    conf->device_lock,
 						    unplug_slaves(conf->mddev);
@@ -302,9 +303,31 @@ static struct stripe_head *get_active_stripe(raid6_conf_t *conf, sector_t sector
 	return sh;
 }
 
-static int grow_stripes(raid6_conf_t *conf, int num)
+static int grow_one_stripe(raid6_conf_t *conf)
 {
 	struct stripe_head *sh;
+	sh = kmem_cache_alloc(conf->slab_cache, GFP_KERNEL);
+	if (!sh)
+		return 0;
+	memset(sh, 0, sizeof(*sh) + (conf->raid_disks-1)*sizeof(struct r5dev));
+	sh->raid_conf = conf;
+	spin_lock_init(&sh->lock);
+
+	if (grow_buffers(sh, conf->raid_disks)) {
+		shrink_buffers(sh, conf->raid_disks);
+		kmem_cache_free(conf->slab_cache, sh);
+		return 0;
+	}
+	/* we just created an active stripe so... */
+	atomic_set(&sh->count, 1);
+	atomic_inc(&conf->active_stripes);
+	INIT_LIST_HEAD(&sh->lru);
+	release_stripe(sh);
+	return 1;
+}
+
+static int grow_stripes(raid6_conf_t *conf, int num)
+{
 	kmem_cache_t *sc;
 	int devs = conf->raid_disks;
 
@@ -316,45 +339,35 @@ static int grow_stripes(raid6_conf_t *conf, int num)
 	if (!sc)
 		return 1;
 	conf->slab_cache = sc;
-	while (num--) {
-		sh = kmem_cache_alloc(sc, GFP_KERNEL);
-		if (!sh)
-			return 1;
-		memset(sh, 0, sizeof(*sh) + (devs-1)*sizeof(struct r5dev));
-		sh->raid_conf = conf;
-		spin_lock_init(&sh->lock);
-
-		if (grow_buffers(sh, conf->raid_disks)) {
-			shrink_buffers(sh, conf->raid_disks);
-			kmem_cache_free(sc, sh);
+	while (num--)
+		if (!grow_one_stripe(conf))
 			return 1;
-		}
-		/* we just created an active stripe so... */
-		atomic_set(&sh->count, 1);
-		atomic_inc(&conf->active_stripes);
-		INIT_LIST_HEAD(&sh->lru);
-		release_stripe(sh);
-	}
 	return 0;
 }
 
-static void shrink_stripes(raid6_conf_t *conf)
+static int drop_one_stripe(raid6_conf_t *conf)
 {
 	struct stripe_head *sh;
+	spin_lock_irq(&conf->device_lock);
+	sh = get_free_stripe(conf);
+	spin_unlock_irq(&conf->device_lock);
+	if (!sh)
+		return 0;
+	if (atomic_read(&sh->count))
+		BUG();
+	shrink_buffers(sh, conf->raid_disks);
+	kmem_cache_free(conf->slab_cache, sh);
+	atomic_dec(&conf->active_stripes);
+	return 1;
+}
 
-	while (1) {
-		spin_lock_irq(&conf->device_lock);
-		sh = get_free_stripe(conf);
-		spin_unlock_irq(&conf->device_lock);
-		if (!sh)
-			break;
-		if (atomic_read(&sh->count))
-			BUG();
-		shrink_buffers(sh, conf->raid_disks);
-		kmem_cache_free(conf->slab_cache, sh);
-		atomic_dec(&conf->active_stripes);
-	}
-	kmem_cache_destroy(conf->slab_cache);
+static void shrink_stripes(raid6_conf_t *conf)
+{
+	while (drop_one_stripe(conf))
+		;
+
+	if (conf->slab_cache)
+		kmem_cache_destroy(conf->slab_cache);
 	conf->slab_cache = NULL;
 }
 
@@ -1912,6 +1925,74 @@ static void raid6d (mddev_t *mddev)
 	PRINTK("--- raid6d inactive\n");
 }
 
+static ssize_t
+raid6_show_stripe_cache_size(mddev_t *mddev, char *page)
+{
+	raid6_conf_t *conf = mddev_to_conf(mddev);
+	if (conf)
+		return sprintf(page, "%d\n", conf->max_nr_stripes);
+	else
+		return 0;
+}
+
+static ssize_t
+raid6_store_stripe_cache_size(mddev_t *mddev, const char *page, size_t len)
+{
+	raid6_conf_t *conf = mddev_to_conf(mddev);
+	char *end;
+	int new;
+	if (len >= PAGE_SIZE)
+		return -EINVAL;
+	if (!conf)
+		return -ENODEV;
+
+	new = simple_strtoul(page, &end, 10);
+	if (!*page || (*end && *end != '\n') )
+		return -EINVAL;
+	if (new <= 16 || new > 32768)
+		return -EINVAL;
+	while (new < conf->max_nr_stripes) {
+		if (drop_one_stripe(conf))
+			conf->max_nr_stripes--;
+		else
+			break;
+	}
+	while (new > conf->max_nr_stripes) {
+		if (grow_one_stripe(conf))
+			conf->max_nr_stripes++;
+		else break;
+	}
+	return len;
+}
+
+static struct md_sysfs_entry
+raid6_stripecache_size = __ATTR(stripe_cache_size, S_IRUGO | S_IWUSR,
+				raid6_show_stripe_cache_size,
+				raid6_store_stripe_cache_size);
+
+static ssize_t
+stripe_cache_active_show(mddev_t *mddev, char *page)
+{
+	raid6_conf_t *conf = mddev_to_conf(mddev);
+	if (conf)
+		return sprintf(page, "%d\n", atomic_read(&conf->active_stripes));
+	else
+		return 0;
+}
+
+static struct md_sysfs_entry
+raid6_stripecache_active = __ATTR_RO(stripe_cache_active);
+
+static struct attribute *raid6_attrs[] =  {
+	&raid6_stripecache_size.attr,
+	&raid6_stripecache_active.attr,
+	NULL,
+};
+static struct attribute_group raid6_attrs_group = {
+	.name = NULL,
+	.attrs = raid6_attrs,
+};
+
 static int run(mddev_t *mddev)
 {
 	raid6_conf_t *conf;
@@ -2095,6 +2176,7 @@ static int stop (mddev_t *mddev)
 	shrink_stripes(conf);
 	kfree(conf->stripe_hashtbl);
 	blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
+	sysfs_remove_group(&mddev->kobj, &raid6_attrs_group);
 	kfree(conf);
 	mddev->private = NULL;
 	return 0;
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 2583a865a58e..2963605c0ecc 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -4,7 +4,7 @@ config DVB_B2C2_FLEXCOP
 	select DVB_STV0299
 	select DVB_MT352
 	select DVB_MT312
-	select DVB_NXT2002
+	select DVB_NXT200X
 	select DVB_STV0297
 	select DVB_BCM3510
 	select DVB_LGDT330X
diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h
index 344a3c898460..7d7e1613c5a7 100644
--- a/drivers/media/dvb/b2c2/flexcop-common.h
+++ b/drivers/media/dvb/b2c2/flexcop-common.h
@@ -116,11 +116,9 @@ void flexcop_dma_free(struct flexcop_dma *dma);
 
 int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
 int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
-int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff);
 int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx);
 int flexcop_dma_xfer_control(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index, int onoff);
 int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles);
-int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets);
 
 /* from flexcop-eeprom.c */
 /* the PCI part uses this call to get the MAC address, the USB part has its own */
diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c
index cf4ed1df6086..6f592bc32d22 100644
--- a/drivers/media/dvb/b2c2/flexcop-dma.c
+++ b/drivers/media/dvb/b2c2/flexcop-dma.c
@@ -169,38 +169,3 @@ int flexcop_dma_config_timer(struct flexcop_device *fc,
 }
 EXPORT_SYMBOL(flexcop_dma_config_timer);
 
-/* packet IRQ does not exist in FCII or FCIIb - according to data book and tests */
-int flexcop_dma_control_packet_irq(struct flexcop_device *fc,
-		flexcop_dma_index_t no,
-		int onoff)
-{
-	flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208);
-
-	deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw);
-	if (no & FC_DMA_1)
-		v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff;
-
-	if (no & FC_DMA_2)
-		v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff;
-
-	fc->write_ibi_reg(fc,ctrl_208,v);
-	deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw);
-
-	return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_control_packet_irq);
-
-int flexcop_dma_config_packet_count(struct flexcop_device *fc,
-		flexcop_dma_index_t dma_idx,
-		u8 packets)
-{
-	flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014;
-	flexcop_ibi_value v = fc->read_ibi_reg(fc,r);
-
-	flexcop_dma_remap(fc,dma_idx,1);
-
-	v.dma_0x4_remap.DMA_maxpackets = packets;
-	fc->write_ibi_reg(fc,r,v);
-	return 0;
-}
-EXPORT_SYMBOL(flexcop_dma_config_packet_count);
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 0b940e152b79..390cc3a99ce6 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -9,7 +9,7 @@
 
 #include "stv0299.h"
 #include "mt352.h"
-#include "nxt2002.h"
+#include "nxt200x.h"
 #include "bcm3510.h"
 #include "stv0297.h"
 #include "mt312.h"
@@ -343,9 +343,10 @@ static struct lgdt330x_config air2pc_atsc_hd5000_config = {
 	.clock_polarity_flip = 1,
 };
 
-static struct nxt2002_config samsung_tbmv_config = {
+static struct nxt200x_config samsung_tbmv_config = {
 	.demod_address    = 0x0a,
-	.request_firmware = flexcop_fe_request_firmware,
+	.pll_address      = 0xc2,
+	.pll_desc         = &dvb_pll_samsung_tbmv,
 };
 
 static struct bcm3510_config air2pc_atsc_first_gen_config = {
@@ -505,7 +506,7 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 		info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
 	} else
 	/* try the air atsc 2nd generation (nxt2002) */
-	if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
+	if ((fc->fe = nxt200x_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
 		fc->dev_type          = FC_AIR_ATSC2;
 		info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
 	} else
diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c
index 62282d8dbfa8..167583bf0621 100644
--- a/drivers/media/dvb/b2c2/flexcop-misc.c
+++ b/drivers/media/dvb/b2c2/flexcop-misc.c
@@ -36,14 +36,14 @@ void flexcop_determine_revision(struct flexcop_device *fc)
 	/* bus parts have to decide if hw pid filtering is used or not. */
 }
 
-const char *flexcop_revision_names[] = {
+static const char *flexcop_revision_names[] = {
 	"Unkown chip",
 	"FlexCopII",
 	"FlexCopIIb",
 	"FlexCopIII",
 };
 
-const char *flexcop_device_names[] = {
+static const char *flexcop_device_names[] = {
 	"Unkown device",
 	"Air2PC/AirStar 2 DVB-T",
 	"Air2PC/AirStar 2 ATSC 1st generation",
@@ -54,7 +54,7 @@ const char *flexcop_device_names[] = {
 	"Air2PC/AirStar 2 ATSC 3rd generation (HD5000)",
 };
 
-const char *flexcop_bus_names[] = {
+static const char *flexcop_bus_names[] = {
 	"USB",
 	"PCI",
 };
diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c
index 2f76eb3fea40..9bc40bdcc282 100644
--- a/drivers/media/dvb/b2c2/flexcop-pci.c
+++ b/drivers/media/dvb/b2c2/flexcop-pci.c
@@ -161,8 +161,10 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id, struct pt_regs *regs)
 			fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
 		u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
 
-		deb_irq("%u irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ",
-				jiffies_to_usecs(jiffies - fc_pci->last_irq),v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos);
+		deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
+				jiffies_to_usecs(jiffies - fc_pci->last_irq),
+				v.raw, (unsigned long long)cur_addr, cur_pos,
+				fc_pci->last_dma1_cur_pos);
 		fc_pci->last_irq = jiffies;
 
 		/* buffer end was reached, restarted from the beginning
diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h
index 3153f9513c63..491f9bd6e195 100644
--- a/drivers/media/dvb/b2c2/flexcop-reg.h
+++ b/drivers/media/dvb/b2c2/flexcop-reg.h
@@ -16,8 +16,6 @@ typedef enum {
 	FLEXCOP_III,
 } flexcop_revision_t;
 
-extern const char *flexcop_revision_names[];
-
 typedef enum {
 	FC_UNK = 0,
 	FC_AIR_DVB,
@@ -34,8 +32,6 @@ typedef enum {
 	FC_PCI,
 } flexcop_bus_t;
 
-extern const char *flexcop_device_names[];
-
 /* FlexCop IBI Registers */
 #if defined(__LITTLE_ENDIAN)
 	#include "flexcop_ibi_value_le.h"
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index a04bb61f21f4..34c3189a1a33 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -381,6 +381,23 @@ bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *
 
 EXPORT_SYMBOL(bt878_device_control);
 
+
+struct cards card_list[] __devinitdata = {
+
+	{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV,			"Nebula Electronics DigiTV" },
+	{ 0x07611461, BTTV_BOARD_AVDVBT_761,			"AverMedia AverTV DVB-T 761" },
+	{ 0x001c11bd, BTTV_BOARD_PINNACLESAT,			"Pinnacle PCTV Sat" },
+	{ 0x002611bd, BTTV_BOARD_TWINHAN_DST,			"Pinnacle PCTV SAT CI" },
+	{ 0x00011822, BTTV_BOARD_TWINHAN_DST,			"Twinhan VisionPlus DVB" },
+	{ 0xfc00270f, BTTV_BOARD_TWINHAN_DST,			"ChainTech digitop DST-1000 DVB-S" },
+	{ 0x07711461, BTTV_BOARD_AVDVBT_771,			"AVermedia AverTV DVB-T 771" },
+	{ 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,		"DViCO FusionHDTV DVB-T Lite" },
+	{ 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,	"DViCO FusionHDTV 5 Lite" },
+	{ 0x20007063, BTTV_BOARD_PC_HDTV,			"pcHDTV HD-2000 TV"},
+	{ 0, -1, NULL }
+};
+
+
 /***********************/
 /* PCI device handling */
 /***********************/
@@ -388,18 +405,41 @@ EXPORT_SYMBOL(bt878_device_control);
 static int __devinit bt878_probe(struct pci_dev *dev,
 				 const struct pci_device_id *pci_id)
 {
-	int result;
+	int result = 0, has_dvb = 0, i;
 	unsigned char lat;
 	struct bt878 *bt;
 #if defined(__powerpc__)
 	unsigned int cmd;
 #endif
+	unsigned int cardid;
+	unsigned short id;
+	struct cards *dvb_cards;
 
 	printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n",
 	       bt878_num);
 	if (pci_enable_device(dev))
 		return -EIO;
 
+	pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &id);
+	cardid = id << 16;
+	pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &id);
+	cardid |= id;
+
+	for (i = 0, dvb_cards = card_list; i < ARRAY_SIZE(card_list); i++, dvb_cards++) {
+		if (cardid == dvb_cards->pci_id) {
+			printk("%s: card id=[0x%x],[ %s ] has DVB functions.\n",
+				__func__, cardid, dvb_cards->name);
+			has_dvb = 1;
+		}
+	}
+
+	if (!has_dvb) {
+		printk("%s: card id=[0x%x], Unknown card.\nExiting..\n", __func__, cardid);
+		result = -EINVAL;
+
+		goto fail0;
+	}
+
 	bt = &bt878[bt878_num];
 	bt->dev = dev;
 	bt->nr = bt878_num;
@@ -416,6 +456,8 @@ static int __devinit bt878_probe(struct pci_dev *dev,
 
 	pci_read_config_byte(dev, PCI_CLASS_REVISION, &bt->revision);
 	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+
+
 	printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ",
 	       bt878_num, bt->id, bt->revision, dev->bus->number,
 	       PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
diff --git a/drivers/media/dvb/bt8xx/bt878.h b/drivers/media/dvb/bt8xx/bt878.h
index a73baf00ca39..9faf93770d08 100644
--- a/drivers/media/dvb/bt8xx/bt878.h
+++ b/drivers/media/dvb/bt8xx/bt878.h
@@ -88,6 +88,23 @@
 
 #define BT878_RISC_SYNC_MASK	(1 << 15)
 
+
+#define BTTV_BOARD_UNKNOWN                 0x00
+#define BTTV_BOARD_PINNACLESAT             0x5e
+#define BTTV_BOARD_NEBULA_DIGITV           0x68
+#define BTTV_BOARD_PC_HDTV                 0x70
+#define BTTV_BOARD_TWINHAN_DST             0x71
+#define BTTV_BOARD_AVDVBT_771              0x7b
+#define BTTV_BOARD_AVDVBT_761              0x7c
+#define BTTV_BOARD_DVICO_DVBT_LITE         0x80
+#define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87
+
+struct cards {
+	__u32 pci_id;
+	__u16 card_id;
+	char  *name;
+};
+
 extern int bt878_num;
 
 struct bt878 {
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 90a69d343b79..d3df12039b06 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -83,12 +83,18 @@ config DVB_USB_UMT_010
 	  Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
 
 config DVB_USB_CXUSB
-	tristate "Medion MD95700 hybrid USB2.0 (Conexant) support"
+	tristate "Conexant USB2.0 hybrid reference design support"
 	depends on DVB_USB
 	select DVB_CX22702
+	select DVB_LGDT330X
+	select DVB_MT352
 	help
-	  Say Y here to support the Medion MD95700 hybrid USB2.0 device. Currently
-	  only the DVB-T part is supported.
+	  Say Y here to support the Conexant USB2.0 hybrid reference design.
+	  Currently, only DVB and ATSC modes are supported, analog mode
+	  shall be added in the future. Devices that require this module:
+
+	  Medion MD95700 hybrid USB2.0 device.
+	  DViCO FusionHDTV (Bluebird) USB2.0 devices
 
 config DVB_USB_DIGITV
 	tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index a7fb06f4cd34..f327fac1688e 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -184,7 +184,7 @@ static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	return 0;
 }
 
-struct dvb_usb_rc_key dvico_mce_rc_keys[] = {
+static struct dvb_usb_rc_key dvico_mce_rc_keys[] = {
 	{ 0xfe, 0x02, KEY_TV },
 	{ 0xfe, 0x0e, KEY_MP3 },
 	{ 0xfe, 0x1a, KEY_DVD },
@@ -234,7 +234,7 @@ struct dvb_usb_rc_key dvico_mce_rc_keys[] = {
 
 static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
 {
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x38 };
+	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x28 };
 	static u8 reset []         = { RESET,      0x80 };
 	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
 	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0x20 };
@@ -255,7 +255,7 @@ static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
 
 static int cxusb_mt352_demod_init(struct dvb_frontend* fe)
 {	/* used in both lgz201 and th7579 */
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x39 };
+	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x29 };
 	static u8 reset []         = { RESET,      0x80 };
 	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
 	static u8 agc_cfg []       = { AGC_TARGET, 0x24, 0x20 };
@@ -273,7 +273,7 @@ static int cxusb_mt352_demod_init(struct dvb_frontend* fe)
 	return 0;
 }
 
-struct cx22702_config cxusb_cx22702_config = {
+static struct cx22702_config cxusb_cx22702_config = {
 	.demod_address = 0x63,
 
 	.output_mode = CX22702_PARALLEL_OUTPUT,
@@ -282,13 +282,13 @@ struct cx22702_config cxusb_cx22702_config = {
 	.pll_set  = dvb_usb_pll_set_i2c,
 };
 
-struct lgdt330x_config cxusb_lgdt330x_config = {
+static struct lgdt330x_config cxusb_lgdt330x_config = {
 	.demod_address = 0x0e,
 	.demod_chip    = LGDT3303,
 	.pll_set       = dvb_usb_pll_set_i2c,
 };
 
-struct mt352_config cxusb_dee1601_config = {
+static struct mt352_config cxusb_dee1601_config = {
 	.demod_address = 0x0f,
 	.demod_init    = cxusb_dee1601_demod_init,
 	.pll_set       = dvb_usb_pll_set,
diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c
index e6c55c9c9417..caa1346e3063 100644
--- a/drivers/media/dvb/dvb-usb/digitv.c
+++ b/drivers/media/dvb/dvb-usb/digitv.c
@@ -175,11 +175,13 @@ static int digitv_probe(struct usb_interface *intf,
 	if ((ret = dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE,&d)) == 0) {
 		u8 b[4] = { 0 };
 
-		b[0] = 1;
-		digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
+		if (d != NULL) { /* do that only when the firmware is loaded */
+			b[0] = 1;
+			digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
 
-		b[0] = 0;
-		digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+			b[0] = 0;
+			digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+		}
 	}
 	return ret;
 }
@@ -194,7 +196,7 @@ static struct dvb_usb_properties digitv_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
 
 	.usb_ctrl = CYPRESS_FX2,
-	.firmware = "dvb-usb-digitv-01.fw",
+	.firmware = "dvb-usb-digitv-02.fw",
 
 	.size_of_priv     = 0,
 
@@ -229,6 +231,7 @@ static struct dvb_usb_properties digitv_properties = {
 			{ &digitv_table[0], NULL },
 			{ NULL },
 		},
+		{ NULL },
 	}
 };
 
diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c
index 130ea7f21f5e..12ebaf8bddca 100644
--- a/drivers/media/dvb/dvb-usb/dtt200u.c
+++ b/drivers/media/dvb/dvb-usb/dtt200u.c
@@ -151,7 +151,7 @@ static struct dvb_usb_properties dtt200u_properties = {
 		  .cold_ids = { &dtt200u_usb_table[0], NULL },
 		  .warm_ids = { &dtt200u_usb_table[1], NULL },
 		},
-		{ 0 },
+		{ NULL },
 	}
 };
 
@@ -192,7 +192,7 @@ static struct dvb_usb_properties wt220u_properties = {
 		  .cold_ids = { &dtt200u_usb_table[2], NULL },
 		  .warm_ids = { &dtt200u_usb_table[3], NULL },
 		},
-		{ 0 },
+		{ NULL },
 	}
 };
 
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
index 8535895819fb..9222b0a81f74 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
@@ -24,6 +24,9 @@ static struct usb_cypress_controller cypress[] = {
 	{ .id = CYPRESS_FX2,     .name = "Cypress FX2",     .cpu_cs_register = 0xe600 },
 };
 
+static int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx,
+			       int *pos);
+
 /*
  * load a firmware packet to the device
  */
@@ -112,7 +115,8 @@ int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_properties
 	return ret;
 }
 
-int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, int *pos)
+static int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx,
+			       int *pos)
 {
 	u8 *b = (u8 *) &fw->data[*pos];
 	int data_offs = 4;
@@ -142,5 +146,3 @@ int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, int *pos)
 
 	return *pos;
 }
-EXPORT_SYMBOL(dvb_usb_get_hexline);
-
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index dd568396e594..5e5d21ad93c9 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -341,7 +341,6 @@ struct hexline {
 	u8 data[255];
 	u8 chk;
 };
-extern int dvb_usb_get_hexline(const struct firmware *, struct hexline *, int *);
 extern int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type);
 
 #endif
diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c
index afa00fdb5ec0..4a95eca81c5c 100644
--- a/drivers/media/dvb/dvb-usb/vp702x.c
+++ b/drivers/media/dvb/dvb-usb/vp702x.c
@@ -53,7 +53,8 @@ int vp702x_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8
 	return ret;
 }
 
-int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
+static int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
+			     u16 index, u8 *b, int blen)
 {
 	deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
 	debug_dump(b,blen,deb_xfer);
@@ -88,7 +89,8 @@ unlock:
 	return ret;
 }
 
-int vp702x_usb_inout_cmd(struct dvb_usb_device *d, u8 cmd, u8 *o, int olen, u8 *i, int ilen, int msec)
+static int vp702x_usb_inout_cmd(struct dvb_usb_device *d, u8 cmd, u8 *o,
+				int olen, u8 *i, int ilen, int msec)
 {
 	u8 bout[olen+2];
 	u8 bin[ilen+1];
diff --git a/drivers/media/dvb/dvb-usb/vp702x.h b/drivers/media/dvb/dvb-usb/vp702x.h
index a808d48e7bf2..c2f97f96c21f 100644
--- a/drivers/media/dvb/dvb-usb/vp702x.h
+++ b/drivers/media/dvb/dvb-usb/vp702x.h
@@ -101,8 +101,6 @@ extern int dvb_usb_vp702x_debug;
 extern struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d);
 
 extern int vp702x_usb_inout_op(struct dvb_usb_device *d, u8 *o, int olen, u8 *i, int ilen, int msec);
-extern int vp702x_usb_inout_cmd(struct dvb_usb_device *d, u8 cmd, u8 *o, int olen, u8 *i, int ilen, int msec);
 extern int vp702x_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
-extern int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
 
 #endif
diff --git a/drivers/media/dvb/dvb-usb/vp7045-fe.c b/drivers/media/dvb/dvb-usb/vp7045-fe.c
index 5242cca5db4a..9999336aeeb6 100644
--- a/drivers/media/dvb/dvb-usb/vp7045-fe.c
+++ b/drivers/media/dvb/dvb-usb/vp7045-fe.c
@@ -23,10 +23,11 @@
 
 struct vp7045_fe_state {
 	struct dvb_frontend fe;
+	struct dvb_frontend_ops ops;
+
 	struct dvb_usb_device *d;
 };
 
-
 static int vp7045_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
 {
 	struct vp7045_fe_state *state = fe->demodulator_priv;
@@ -150,7 +151,8 @@ struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d)
 		goto error;
 
 	s->d = d;
-	s->fe.ops = &vp7045_fe_ops;
+	memcpy(&s->ops, &vp7045_fe_ops, sizeof(struct dvb_frontend_ops));
+	s->fe.ops = &s->ops;
 	s->fe.demodulator_priv = s;
 
 	goto success;
diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c
index 028204956bb0..3835235b68df 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.c
+++ b/drivers/media/dvb/dvb-usb/vp7045.c
@@ -247,7 +247,7 @@ static struct dvb_usb_properties vp7045_properties = {
 		  .cold_ids = { &vp7045_usb_table[2], NULL },
 		  .warm_ids = { &vp7045_usb_table[3], NULL },
 		},
-		{ 0 },
+		{ NULL },
 	}
 };
 
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index db3a8b40031e..76b6a2aef32f 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -28,12 +28,6 @@ config DVB_TDA8083
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
-config DVB_TDA80XX
-	tristate "Philips TDA8044 or TDA8083 based"
-	depends on DVB_CORE
-	help
-	  A DVB-S tuner module. Say Y when you want to support this frontend.
-
 config DVB_MT312
 	tristate "Zarlink MT312 based"
 	depends on DVB_CORE
@@ -139,12 +133,6 @@ config DVB_DIB3000MC
 comment "DVB-C (cable) frontends"
 	depends on DVB_CORE
 
-config DVB_ATMEL_AT76C651
-	tristate "Atmel AT76C651 based"
-	depends on DVB_CORE
-	help
-	  A DVB-C tuner module. Say Y when you want to support this frontend.
-
 config DVB_VES1820
 	tristate "VLSI VES1820 based"
 	depends on DVB_CORE
@@ -166,18 +154,6 @@ config DVB_STV0297
 comment "ATSC (North American/Korean Terresterial DTV) frontends"
 	depends on DVB_CORE
 
-config DVB_NXT2002
-	tristate "Nxt2002 based"
-	depends on DVB_CORE
-	select FW_LOADER
-	help
-	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
-
-	  This driver needs external firmware. Please use the command
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" to
-	  download/extract it, and then copy it to /usr/lib/hotplug/firmware
-	  or /lib/firmware (depending on configuration of firmware hotplug).
-
 config DVB_NXT200X
 	tristate "Nextwave NXT2002/NXT2004 based"
 	depends on DVB_CORE
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 615ec830e1c9..1af769cd90c0 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_DVB_CORE) += dvb-pll.o
 obj-$(CONFIG_DVB_STV0299) += stv0299.o
 obj-$(CONFIG_DVB_SP8870) += sp8870.o
 obj-$(CONFIG_DVB_CX22700) += cx22700.o
-obj-$(CONFIG_DVB_ATMEL_AT76C651) += at76c651.o
 obj-$(CONFIG_DVB_CX24110) += cx24110.o
 obj-$(CONFIG_DVB_TDA8083) += tda8083.o
 obj-$(CONFIG_DVB_L64781) += l64781.o
@@ -22,10 +21,8 @@ obj-$(CONFIG_DVB_SP887X) += sp887x.o
 obj-$(CONFIG_DVB_NXT6000) += nxt6000.o
 obj-$(CONFIG_DVB_MT352) += mt352.o
 obj-$(CONFIG_DVB_CX22702) += cx22702.o
-obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o
 obj-$(CONFIG_DVB_TDA10021) += tda10021.o
 obj-$(CONFIG_DVB_STV0297) += stv0297.o
-obj-$(CONFIG_DVB_NXT2002) += nxt2002.o
 obj-$(CONFIG_DVB_NXT200X) += nxt200x.o
 obj-$(CONFIG_DVB_OR51211) += or51211.o
 obj-$(CONFIG_DVB_OR51132) += or51132.o
diff --git a/drivers/media/dvb/frontends/at76c651.c b/drivers/media/dvb/frontends/at76c651.c
deleted file mode 100644
index 8e0f4b3a1417..000000000000
--- a/drivers/media/dvb/frontends/at76c651.c
+++ /dev/null
@@ -1,450 +0,0 @@
-/*
- * at76c651.c
- *
- * Atmel DVB-C Frontend Driver (at76c651/tua6010xs)
- *
- * Copyright (C) 2001 fnbrd <fnbrd@gmx.de>
- *             & 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- *             & 2003 Wolfram Joost <dbox2@frokaschwei.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * AT76C651
- * http://www.nalanda.nitc.ac.in/industry/datasheets/atmel/acrobat/doc1293.pdf
- * http://www.atmel.com/atmel/acrobat/doc1320.pdf
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/bitops.h>
-#include "dvb_frontend.h"
-#include "at76c651.h"
-
-
-struct at76c651_state {
-
-	struct i2c_adapter* i2c;
-
-	struct dvb_frontend_ops ops;
-
-	const struct at76c651_config* config;
-
-	struct dvb_frontend frontend;
-
-	/* revision of the chip */
-	u8 revision;
-
-	/* last QAM value set */
-	u8 qam;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "at76c651: " args); \
-	} while (0)
-
-
-#if ! defined(__powerpc__)
-static __inline__ int __ilog2(unsigned long x)
-{
-	int i;
-
-	if (x == 0)
-		return -1;
-
-	for (i = 0; x != 0; i++)
-		x >>= 1;
-
-	return i - 1;
-}
-#endif
-
-static int at76c651_writereg(struct at76c651_state* state, u8 reg, u8 data)
-{
-	int ret;
-	u8 buf[] = { reg, data };
-	struct i2c_msg msg =
-		{ .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		dprintk("%s: writereg error "
-			"(reg == 0x%02x, val == 0x%02x, ret == %i)\n",
-			__FUNCTION__, reg, data, ret);
-
-	msleep(10);
-
-	return (ret != 1) ? -EREMOTEIO : 0;
-}
-
-static u8 at76c651_readreg(struct at76c651_state* state, u8 reg)
-{
-	int ret;
-	u8 val;
-	struct i2c_msg msg[] = {
-		{ .addr = state->config->demod_address, .flags = 0, .buf = &reg, .len = 1 },
-		{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = &val, .len = 1 }
-	};
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		dprintk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret);
-
-	return val;
-}
-
-static int at76c651_reset(struct at76c651_state* state)
-{
-	return at76c651_writereg(state, 0x07, 0x01);
-}
-
-static void at76c651_disable_interrupts(struct at76c651_state* state)
-{
-	at76c651_writereg(state, 0x0b, 0x00);
-}
-
-static int at76c651_set_auto_config(struct at76c651_state *state)
-{
-	/*
-	 * Autoconfig
-	 */
-
-	at76c651_writereg(state, 0x06, 0x01);
-
-	/*
-	 * Performance optimizations, should be done after autoconfig
-	 */
-
-	at76c651_writereg(state, 0x10, 0x06);
-	at76c651_writereg(state, 0x11, ((state->qam == 5) || (state->qam == 7)) ? 0x12 : 0x10);
-	at76c651_writereg(state, 0x15, 0x28);
-	at76c651_writereg(state, 0x20, 0x09);
-	at76c651_writereg(state, 0x24, ((state->qam == 5) || (state->qam == 7)) ? 0xC0 : 0x90);
-	at76c651_writereg(state, 0x30, 0x90);
-	if (state->qam == 5)
-		at76c651_writereg(state, 0x35, 0x2A);
-
-	/*
-	 * Initialize A/D-converter
-	 */
-
-	if (state->revision == 0x11) {
-		at76c651_writereg(state, 0x2E, 0x38);
-		at76c651_writereg(state, 0x2F, 0x13);
-	}
-
-	at76c651_disable_interrupts(state);
-
-	/*
-	 * Restart operation
-	 */
-
-	at76c651_reset(state);
-
-	return 0;
-}
-
-static void at76c651_set_bbfreq(struct at76c651_state* state)
-{
-	at76c651_writereg(state, 0x04, 0x3f);
-	at76c651_writereg(state, 0x05, 0xee);
-}
-
-static int at76c651_set_symbol_rate(struct at76c651_state* state, u32 symbol_rate)
-{
-	u8 exponent;
-	u32 mantissa;
-
-	if (symbol_rate > 9360000)
-		return -EINVAL;
-
-	/*
-	 * FREF = 57800 kHz
-	 * exponent = 10 + floor (log2(symbol_rate / FREF))
-	 * mantissa = (symbol_rate / FREF) * (1 << (30 - exponent))
-	 */
-
-	exponent = __ilog2((symbol_rate << 4) / 903125);
-	mantissa = ((symbol_rate / 3125) * (1 << (24 - exponent))) / 289;
-
-	at76c651_writereg(state, 0x00, mantissa >> 13);
-	at76c651_writereg(state, 0x01, mantissa >> 5);
-	at76c651_writereg(state, 0x02, (mantissa << 3) | exponent);
-
-	return 0;
-}
-
-static int at76c651_set_qam(struct at76c651_state *state, fe_modulation_t qam)
-{
-	switch (qam) {
-	case QPSK:
-		state->qam = 0x02;
-		break;
-	case QAM_16:
-		state->qam = 0x04;
-		break;
-	case QAM_32:
-		state->qam = 0x05;
-		break;
-	case QAM_64:
-		state->qam = 0x06;
-		break;
-	case QAM_128:
-		state->qam = 0x07;
-		break;
-	case QAM_256:
-		state->qam = 0x08;
-		break;
-#if 0
-	case QAM_512:
-		state->qam = 0x09;
-		break;
-	case QAM_1024:
-		state->qam = 0x0A;
-		break;
-#endif
-	default:
-		return -EINVAL;
-
-	}
-
-	return at76c651_writereg(state, 0x03, state->qam);
-}
-
-static int at76c651_set_inversion(struct at76c651_state* state, fe_spectral_inversion_t inversion)
-{
-	u8 feciqinv = at76c651_readreg(state, 0x60);
-
-	switch (inversion) {
-	case INVERSION_OFF:
-		feciqinv |= 0x02;
-		feciqinv &= 0xFE;
-		break;
-
-	case INVERSION_ON:
-		feciqinv |= 0x03;
-		break;
-
-	case INVERSION_AUTO:
-		feciqinv &= 0xFC;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return at76c651_writereg(state, 0x60, feciqinv);
-}
-
-static int at76c651_set_parameters(struct dvb_frontend* fe,
-				   struct dvb_frontend_parameters *p)
-{
-	int ret;
-	struct at76c651_state* state = fe->demodulator_priv;
-
-	at76c651_writereg(state, 0x0c, 0xc3);
-	state->config->pll_set(fe, p);
-	at76c651_writereg(state, 0x0c, 0xc2);
-
-	if ((ret = at76c651_set_symbol_rate(state, p->u.qam.symbol_rate)))
-		return ret;
-
-	if ((ret = at76c651_set_inversion(state, p->inversion)))
-		return ret;
-
-	return at76c651_set_auto_config(state);
-}
-
-static int at76c651_set_defaults(struct dvb_frontend* fe)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-
-	at76c651_set_symbol_rate(state, 6900000);
-	at76c651_set_qam(state, QAM_64);
-	at76c651_set_bbfreq(state);
-	at76c651_set_auto_config(state);
-
-	if (state->config->pll_init) {
-		at76c651_writereg(state, 0x0c, 0xc3);
-		state->config->pll_init(fe);
-		at76c651_writereg(state, 0x0c, 0xc2);
-	}
-
-	return 0;
-}
-
-static int at76c651_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-	u8 sync;
-
-	/*
-	 * Bits: FEC, CAR, EQU, TIM, AGC2, AGC1, ADC, PLL (PLL=0)
-	 */
-	sync = at76c651_readreg(state, 0x80);
-	*status = 0;
-
-	if (sync & (0x04 | 0x10))	/* AGC1 || TIM */
-		*status |= FE_HAS_SIGNAL;
-	if (sync & 0x10)		/* TIM */
-		*status |= FE_HAS_CARRIER;
-	if (sync & 0x80)		/* FEC */
-		*status |= FE_HAS_VITERBI;
-	if (sync & 0x40)		/* CAR */
-		*status |= FE_HAS_SYNC;
-	if ((sync & 0xF0) == 0xF0)	/* TIM && EQU && CAR && FEC */
-		*status |= FE_HAS_LOCK;
-
-	return 0;
-}
-
-static int at76c651_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-
-	*ber = (at76c651_readreg(state, 0x81) & 0x0F) << 16;
-	*ber |= at76c651_readreg(state, 0x82) << 8;
-	*ber |= at76c651_readreg(state, 0x83);
-	*ber *= 10;
-
-	return 0;
-}
-
-static int at76c651_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-
-	u8 gain = ~at76c651_readreg(state, 0x91);
-	*strength = (gain << 8) | gain;
-
-	return 0;
-}
-
-static int at76c651_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-
-	*snr = 0xFFFF -
-	    ((at76c651_readreg(state, 0x8F) << 8) |
-	     at76c651_readreg(state, 0x90));
-
-	return 0;
-}
-
-static int at76c651_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-
-	*ucblocks = at76c651_readreg(state, 0x82);
-
-	return 0;
-}
-
-static int at76c651_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *fesettings)
-{
-	fesettings->min_delay_ms = 50;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static void at76c651_release(struct dvb_frontend* fe)
-{
-	struct at76c651_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops at76c651_ops;
-
-struct dvb_frontend* at76c651_attach(const struct at76c651_config* config,
-				     struct i2c_adapter* i2c)
-{
-	struct at76c651_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct at76c651_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->qam = 0;
-
-	/* check if the demod is there */
-	if (at76c651_readreg(state, 0x0e) != 0x65) goto error;
-
-	/* finalise state setup */
-	state->i2c = i2c;
-	state->revision = at76c651_readreg(state, 0x0f) & 0xfe;
-	memcpy(&state->ops, &at76c651_ops, sizeof(struct dvb_frontend_ops));
-
-	/* create dvb_frontend */
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops at76c651_ops = {
-
-	.info = {
-		.name = "Atmel AT76C651B DVB-C",
-		.type = FE_QAM,
-		.frequency_min = 48250000,
-		.frequency_max = 863250000,
-		.frequency_stepsize = 62500,
-		/*.frequency_tolerance = */	/* FIXME: 12% of SR */
-		.symbol_rate_min = 0,		/* FIXME */
-		.symbol_rate_max = 9360000,	/* FIXME */
-		.symbol_rate_tolerance = 4000,
-		.caps = FE_CAN_INVERSION_AUTO |
-		    FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-		    FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-		    FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
-		    FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | FE_CAN_QAM_128 |
-		    FE_CAN_MUTE_TS | FE_CAN_QAM_256 | FE_CAN_RECOVER
-	},
-
-	.release = at76c651_release,
-
-	.init = at76c651_set_defaults,
-
-	.set_frontend = at76c651_set_parameters,
-	.get_tune_settings = at76c651_get_tune_settings,
-
-	.read_status = at76c651_read_status,
-	.read_ber = at76c651_read_ber,
-	.read_signal_strength = at76c651_read_signal_strength,
-	.read_snr = at76c651_read_snr,
-	.read_ucblocks = at76c651_read_ucblocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Atmel AT76C651 DVB-C Demodulator Driver");
-MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(at76c651_attach);
diff --git a/drivers/media/dvb/frontends/at76c651.h b/drivers/media/dvb/frontends/at76c651.h
deleted file mode 100644
index 34054df93608..000000000000
--- a/drivers/media/dvb/frontends/at76c651.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * at76c651.c
- *
- * Atmel DVB-C Frontend Driver (at76c651)
- *
- * Copyright (C) 2001 fnbrd <fnbrd@gmx.de>
- *             & 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- *             & 2003 Wolfram Joost <dbox2@frokaschwei.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * AT76C651
- * http://www.nalanda.nitc.ac.in/industry/datasheets/atmel/acrobat/doc1293.pdf
- * http://www.atmel.com/atmel/acrobat/doc1320.pdf
- */
-
-#ifndef AT76C651_H
-#define AT76C651_H
-
-#include <linux/dvb/frontend.h>
-
-struct at76c651_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* PLL maintenance */
-	int (*pll_init)(struct dvb_frontend* fe);
-	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
-};
-
-extern struct dvb_frontend* at76c651_attach(const struct at76c651_config* config,
-					    struct i2c_adapter* i2c);
-
-#endif // AT76C651_H
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index 1b9934ea5b06..4dcb6050d4fa 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -326,11 +326,11 @@ struct dvb_pll_desc dvb_pll_tuv1236d = {
 };
 EXPORT_SYMBOL(dvb_pll_tuv1236d);
 
-/* Samsung TBMV30111IN
+/* Samsung TBMV30111IN / TBMV30712IN1
  * used in Air2PC ATSC - 2nd generation (nxt2002)
  */
-struct dvb_pll_desc dvb_pll_tbmv30111in = {
-	.name = "Samsung TBMV30111IN",
+struct dvb_pll_desc dvb_pll_samsung_tbmv = {
+	.name = "Samsung TBMV30111IN / TBMV30712IN1",
 	.min = 54000000,
 	.max = 860000000,
 	.count = 6,
@@ -343,7 +343,7 @@ struct dvb_pll_desc dvb_pll_tbmv30111in = {
 		{ 999999999, 44000000, 166666, 0xfc, 0x02 },
 	}
 };
-EXPORT_SYMBOL(dvb_pll_tbmv30111in);
+EXPORT_SYMBOL(dvb_pll_samsung_tbmv);
 
 /*
  * Philips SD1878 Tuner.
diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h
index f682c09189b3..bb8d4b4eb183 100644
--- a/drivers/media/dvb/frontends/dvb-pll.h
+++ b/drivers/media/dvb/frontends/dvb-pll.h
@@ -38,7 +38,7 @@ extern struct dvb_pll_desc dvb_pll_tded4;
 
 extern struct dvb_pll_desc dvb_pll_tuv1236d;
 extern struct dvb_pll_desc dvb_pll_tdhu2;
-extern struct dvb_pll_desc dvb_pll_tbmv30111in;
+extern struct dvb_pll_desc dvb_pll_samsung_tbmv;
 extern struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261;
 
 int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c
deleted file mode 100644
index 4f263e65ba14..000000000000
--- a/drivers/media/dvb/frontends/nxt2002.c
+++ /dev/null
@@ -1,706 +0,0 @@
-/*
-    Support for B2C2/BBTI Technisat Air2PC - ATSC
-
-    Copyright (C) 2004 Taylor Jacob <rtjacob@earthlink.net>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-/*
- * This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" to
- * download/extract it, and then copy it to /usr/lib/hotplug/firmware
- * or /lib/firmware (depending on configuration of firmware hotplug).
- */
-#define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw"
-#define CRC_CCIT_MASK 0x1021
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "nxt2002.h"
-
-struct nxt2002_state {
-
-	struct i2c_adapter* i2c;
-	struct dvb_frontend_ops ops;
-	const struct nxt2002_config* config;
-	struct dvb_frontend frontend;
-
-	/* demodulator private data */
-	u8 initialised:1;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "nxt2002: " args); \
-	} while (0)
-
-static int i2c_writebytes (struct nxt2002_state* state, u8 reg, u8 *buf, u8 len)
-{
-	/* probbably a much better way or doing this */
-	u8 buf2 [256],x;
-	int err;
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf2, .len = len + 1 };
-
-	buf2[0] = reg;
-	for (x = 0 ; x < len ; x++)
-		buf2[x+1] = buf[x];
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-		printk ("%s: i2c write error (addr %02x, err == %i)\n",
-			__FUNCTION__, state->config->demod_address, err);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static u8 i2c_readbytes (struct nxt2002_state* state, u8 reg, u8* buf, u8 len)
-{
-	u8 reg2 [] = { reg };
-
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = reg2, .len = 1 },
-			{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } };
-
-	int err;
-
-	if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
-		printk ("%s: i2c read error (addr %02x, err == %i)\n",
-			__FUNCTION__, state->config->demod_address, err);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static u16 nxt2002_crc(u16 crc, u8 c)
-{
-
-	u8 i;
-	u16 input = (u16) c & 0xFF;
-
-	input<<=8;
-	for(i=0 ;i<8 ;i++) {
-		if((crc ^ input) & 0x8000)
-			crc=(crc<<1)^CRC_CCIT_MASK;
-		else
-			crc<<=1;
-	input<<=1;
-	}
-	return crc;
-}
-
-static int nxt2002_writereg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len)
-{
-	u8 buf;
-	dprintk("%s\n", __FUNCTION__);
-
-	/* set multi register length */
-	i2c_writebytes(state,0x34,&len,1);
-
-	/* set mutli register register */
-	i2c_writebytes(state,0x35,&reg,1);
-
-	/* send the actual data */
-	i2c_writebytes(state,0x36,data,len);
-
-	/* toggle the multireg write bit*/
-	buf = 0x02;
-	i2c_writebytes(state,0x21,&buf,1);
-
-	i2c_readbytes(state,0x21,&buf,1);
-
-	if ((buf & 0x02) == 0)
-		return 0;
-
-	dprintk("Error writing multireg register %02X\n",reg);
-
-	return 0;
-}
-
-static int nxt2002_readreg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len)
-{
-	u8 len2;
-	dprintk("%s\n", __FUNCTION__);
-
-	/* set multi register length */
-	len2 = len & 0x80;
-	i2c_writebytes(state,0x34,&len2,1);
-
-	/* set mutli register register */
-	i2c_writebytes(state,0x35,&reg,1);
-
-	/* send the actual data */
-	i2c_readbytes(state,reg,data,len);
-
-	return 0;
-}
-
-static void nxt2002_microcontroller_stop (struct nxt2002_state* state)
-{
-	u8 buf[2],counter = 0;
-	dprintk("%s\n", __FUNCTION__);
-
-	buf[0] = 0x80;
-	i2c_writebytes(state,0x22,buf,1);
-
-	while (counter < 20) {
-		i2c_readbytes(state,0x31,buf,1);
-		if (buf[0] & 0x40)
-			return;
-		msleep(10);
-		counter++;
-	}
-
-	dprintk("Timeout waiting for micro to stop.. This is ok after firmware upload\n");
-	return;
-}
-
-static void nxt2002_microcontroller_start (struct nxt2002_state* state)
-{
-	u8 buf;
-	dprintk("%s\n", __FUNCTION__);
-
-	buf = 0x00;
-	i2c_writebytes(state,0x22,&buf,1);
-}
-
-static int nxt2002_writetuner (struct nxt2002_state* state, u8* data)
-{
-	u8 buf,count = 0;
-
-	dprintk("Tuner Bytes: %02X %02X %02X %02X\n",data[0],data[1],data[2],data[3]);
-
-	dprintk("%s\n", __FUNCTION__);
-	/* stop the micro first */
-	nxt2002_microcontroller_stop(state);
-
-	/* set the i2c transfer speed to the tuner */
-	buf = 0x03;
-	i2c_writebytes(state,0x20,&buf,1);
-
-	/* setup to transfer 4 bytes via i2c */
-	buf = 0x04;
-	i2c_writebytes(state,0x34,&buf,1);
-
-	/* write actual tuner bytes */
-	i2c_writebytes(state,0x36,data,4);
-
-	/* set tuner i2c address */
-	buf = 0xC2;
-	i2c_writebytes(state,0x35,&buf,1);
-
-	/* write UC Opmode to begin transfer */
-	buf = 0x80;
-	i2c_writebytes(state,0x21,&buf,1);
-
-	while (count < 20) {
-		i2c_readbytes(state,0x21,&buf,1);
-		if ((buf & 0x80)== 0x00)
-			return 0;
-		msleep(100);
-		count++;
-	}
-
-	printk("nxt2002: timeout error writing tuner\n");
-	return 0;
-}
-
-static void nxt2002_agc_reset(struct nxt2002_state* state)
-{
-	u8 buf;
-	dprintk("%s\n", __FUNCTION__);
-
-	buf = 0x08;
-	i2c_writebytes(state,0x08,&buf,1);
-
-	buf = 0x00;
-	i2c_writebytes(state,0x08,&buf,1);
-
-	return;
-}
-
-static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
-{
-
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u8 buf[256],written = 0,chunkpos = 0;
-	u16 rambase,position,crc = 0;
-
-	dprintk("%s\n", __FUNCTION__);
-	dprintk("Firmware is %zu bytes\n",fw->size);
-
-	/* Get the RAM base for this nxt2002 */
-	i2c_readbytes(state,0x10,buf,1);
-
-	if (buf[0] & 0x10)
-		rambase = 0x1000;
-	else
-		rambase = 0x0000;
-
-	dprintk("rambase on this nxt2002 is %04X\n",rambase);
-
-	/* Hold the micro in reset while loading firmware */
-	buf[0] = 0x80;
-	i2c_writebytes(state,0x2B,buf,1);
-
-	for (position = 0; position < fw->size ; position++) {
-		if (written == 0) {
-			crc = 0;
-			chunkpos = 0x28;
-			buf[0] = ((rambase + position) >> 8);
-			buf[1] = (rambase + position) & 0xFF;
-			buf[2] = 0x81;
-			/* write starting address */
-			i2c_writebytes(state,0x29,buf,3);
-		}
-		written++;
-		chunkpos++;
-
-		if ((written % 4) == 0)
-			i2c_writebytes(state,chunkpos,&fw->data[position-3],4);
-
-		crc = nxt2002_crc(crc,fw->data[position]);
-
-		if ((written == 255) || (position+1 == fw->size)) {
-			/* write remaining bytes of firmware */
-			i2c_writebytes(state, chunkpos+4-(written %4),
-				&fw->data[position-(written %4) + 1],
-				written %4);
-			buf[0] = crc << 8;
-			buf[1] = crc & 0xFF;
-
-			/* write crc */
-			i2c_writebytes(state,0x2C,buf,2);
-
-			/* do a read to stop things */
-			i2c_readbytes(state,0x2A,buf,1);
-
-			/* set transfer mode to complete */
-			buf[0] = 0x80;
-			i2c_writebytes(state,0x2B,buf,1);
-
-			written = 0;
-		}
-	}
-
-	printk ("done.\n");
-	return 0;
-};
-
-static int nxt2002_setup_frontend_parameters (struct dvb_frontend* fe,
-					     struct dvb_frontend_parameters *p)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u32 freq = 0;
-	u16 tunerfreq = 0;
-	u8 buf[4];
-
-	freq = 44000 + ( p->frequency / 1000 );
-
-	dprintk("freq = %d      p->frequency = %d\n",freq,p->frequency);
-
-	tunerfreq = freq * 24/4000;
-
-	buf[0] = (tunerfreq >> 8) & 0x7F;
-	buf[1] = (tunerfreq & 0xFF);
-
-	if (p->frequency <= 214000000) {
-		buf[2] = 0x84 + (0x06 << 3);
-		buf[3] = (p->frequency <= 172000000) ? 0x01 : 0x02;
-	} else if (p->frequency <= 721000000) {
-		buf[2] = 0x84 + (0x07 << 3);
-		buf[3] = (p->frequency <= 467000000) ? 0x02 : 0x08;
-	} else if (p->frequency <= 841000000) {
-		buf[2] = 0x84 + (0x0E << 3);
-		buf[3] = 0x08;
-	} else {
-		buf[2] = 0x84 + (0x0F << 3);
-		buf[3] = 0x02;
-	}
-
-	/* write frequency information */
-	nxt2002_writetuner(state,buf);
-
-	/* reset the agc now that tuning has been completed */
-	nxt2002_agc_reset(state);
-
-	/* set target power level */
-	switch (p->u.vsb.modulation) {
-		case QAM_64:
-		case QAM_256:
-				buf[0] = 0x74;
-				break;
-		case VSB_8:
-				buf[0] = 0x70;
-				break;
-		default:
-				return -EINVAL;
-				break;
-	}
-	i2c_writebytes(state,0x42,buf,1);
-
-	/* configure sdm */
-	buf[0] = 0x87;
-	i2c_writebytes(state,0x57,buf,1);
-
-	/* write sdm1 input */
-	buf[0] = 0x10;
-	buf[1] = 0x00;
-	nxt2002_writereg_multibyte(state,0x58,buf,2);
-
-	/* write sdmx input */
-	switch (p->u.vsb.modulation) {
-		case QAM_64:
-				buf[0] = 0x68;
-				break;
-		case QAM_256:
-				buf[0] = 0x64;
-				break;
-		case VSB_8:
-				buf[0] = 0x60;
-				break;
-		default:
-				return -EINVAL;
-				break;
-	}
-	buf[1] = 0x00;
-	nxt2002_writereg_multibyte(state,0x5C,buf,2);
-
-	/* write adc power lpf fc */
-	buf[0] = 0x05;
-	i2c_writebytes(state,0x43,buf,1);
-
-	/* write adc power lpf fc */
-	buf[0] = 0x05;
-	i2c_writebytes(state,0x43,buf,1);
-
-	/* write accumulator2 input */
-	buf[0] = 0x80;
-	buf[1] = 0x00;
-	nxt2002_writereg_multibyte(state,0x4B,buf,2);
-
-	/* write kg1 */
-	buf[0] = 0x00;
-	i2c_writebytes(state,0x4D,buf,1);
-
-	/* write sdm12 lpf fc */
-	buf[0] = 0x44;
-	i2c_writebytes(state,0x55,buf,1);
-
-	/* write agc control reg */
-	buf[0] = 0x04;
-	i2c_writebytes(state,0x41,buf,1);
-
-	/* write agc ucgp0 */
-	switch (p->u.vsb.modulation) {
-		case QAM_64:
-				buf[0] = 0x02;
-				break;
-		case QAM_256:
-				buf[0] = 0x03;
-				break;
-		case VSB_8:
-				buf[0] = 0x00;
-				break;
-		default:
-				return -EINVAL;
-				break;
-	}
-	i2c_writebytes(state,0x30,buf,1);
-
-	/* write agc control reg */
-	buf[0] = 0x00;
-	i2c_writebytes(state,0x41,buf,1);
-
-	/* write accumulator2 input */
-	buf[0] = 0x80;
-	buf[1] = 0x00;
-	nxt2002_writereg_multibyte(state,0x49,buf,2);
-	nxt2002_writereg_multibyte(state,0x4B,buf,2);
-
-	/* write agc control reg */
-	buf[0] = 0x04;
-	i2c_writebytes(state,0x41,buf,1);
-
-	nxt2002_microcontroller_start(state);
-
-	/* adjacent channel detection should be done here, but I don't
-	have any stations with this need so I cannot test it */
-
-	return 0;
-}
-
-static int nxt2002_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u8 lock;
-	i2c_readbytes(state,0x31,&lock,1);
-
-	*status = 0;
-	if (lock & 0x20) {
-		*status |= FE_HAS_SIGNAL;
-		*status |= FE_HAS_CARRIER;
-		*status |= FE_HAS_VITERBI;
-		*status |= FE_HAS_SYNC;
-		*status |= FE_HAS_LOCK;
-	}
-	return 0;
-}
-
-static int nxt2002_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u8 b[3];
-
-	nxt2002_readreg_multibyte(state,0xE6,b,3);
-
-	*ber = ((b[0] << 8) + b[1]) * 8;
-
-	return 0;
-}
-
-static int nxt2002_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u8 b[2];
-	u16 temp = 0;
-
-	/* setup to read cluster variance */
-	b[0] = 0x00;
-	i2c_writebytes(state,0xA1,b,1);
-
-	/* get multreg val */
-	nxt2002_readreg_multibyte(state,0xA6,b,2);
-
-	temp = (b[0] << 8) | b[1];
-	*strength = ((0x7FFF - temp) & 0x0FFF) * 16;
-
-	return 0;
-}
-
-static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u8 b[2];
-	u16 temp = 0, temp2;
-	u32 snrdb = 0;
-
-	/* setup to read cluster variance */
-	b[0] = 0x00;
-	i2c_writebytes(state,0xA1,b,1);
-
-	/* get multreg val from 0xA6 */
-	nxt2002_readreg_multibyte(state,0xA6,b,2);
-
-	temp = (b[0] << 8) | b[1];
-	temp2 = 0x7FFF - temp;
-
-	/* snr will be in db */
-	if (temp2 > 0x7F00)
-		snrdb = 1000*24 + ( 1000*(30-24) * ( temp2 - 0x7F00 ) / ( 0x7FFF - 0x7F00 ) );
-	else if (temp2 > 0x7EC0)
-		snrdb = 1000*18 + ( 1000*(24-18) * ( temp2 - 0x7EC0 ) / ( 0x7F00 - 0x7EC0 ) );
-	else if (temp2 > 0x7C00)
-		snrdb = 1000*12 + ( 1000*(18-12) * ( temp2 - 0x7C00 ) / ( 0x7EC0 - 0x7C00 ) );
-	else
-		snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) );
-
-	/* the value reported back from the frontend will be FFFF=32db 0000=0db */
-
-	*snr = snrdb * (0xFFFF/32000);
-
-	return 0;
-}
-
-static int nxt2002_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u8 b[3];
-
-	nxt2002_readreg_multibyte(state,0xE6,b,3);
-	*ucblocks = b[2];
-
-	return 0;
-}
-
-static int nxt2002_sleep(struct dvb_frontend* fe)
-{
-	return 0;
-}
-
-static int nxt2002_init(struct dvb_frontend* fe)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	const struct firmware *fw;
-	int ret;
-	u8 buf[2];
-
-	if (!state->initialised) {
-		/* request the firmware, this will block until someone uploads it */
-		printk("nxt2002: Waiting for firmware upload (%s)...\n", NXT2002_DEFAULT_FIRMWARE);
-		ret = state->config->request_firmware(fe, &fw, NXT2002_DEFAULT_FIRMWARE);
-		printk("nxt2002: Waiting for firmware upload(2)...\n");
-		if (ret) {
-			printk("nxt2002: no firmware upload (timeout or file not found?)\n");
-			return ret;
-		}
-
-		ret = nxt2002_load_firmware(fe, fw);
-		if (ret) {
-			printk("nxt2002: writing firmware to device failed\n");
-			release_firmware(fw);
-			return ret;
-		}
-		printk("nxt2002: firmware upload complete\n");
-
-		/* Put the micro into reset */
-		nxt2002_microcontroller_stop(state);
-
-		/* ensure transfer is complete */
-		buf[0]=0;
-		i2c_writebytes(state,0x2B,buf,1);
-
-		/* Put the micro into reset for real this time */
-		nxt2002_microcontroller_stop(state);
-
-		/* soft reset everything (agc,frontend,eq,fec)*/
-		buf[0] = 0x0F;
-		i2c_writebytes(state,0x08,buf,1);
-		buf[0] = 0x00;
-		i2c_writebytes(state,0x08,buf,1);
-
-		/* write agc sdm configure */
-		buf[0] = 0xF1;
-		i2c_writebytes(state,0x57,buf,1);
-
-		/* write mod output format */
-		buf[0] = 0x20;
-		i2c_writebytes(state,0x09,buf,1);
-
-		/* write fec mpeg mode */
-		buf[0] = 0x7E;
-		buf[1] = 0x00;
-		i2c_writebytes(state,0xE9,buf,2);
-
-		/* write mux selection */
-		buf[0] = 0x00;
-		i2c_writebytes(state,0xCC,buf,1);
-
-		state->initialised = 1;
-	}
-
-	return 0;
-}
-
-static int nxt2002_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
-	fesettings->min_delay_ms = 500;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static void nxt2002_release(struct dvb_frontend* fe)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops nxt2002_ops;
-
-struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config,
-				   struct i2c_adapter* i2c)
-{
-	struct nxt2002_state* state = NULL;
-	u8 buf [] = {0,0,0,0,0};
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct nxt2002_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	memcpy(&state->ops, &nxt2002_ops, sizeof(struct dvb_frontend_ops));
-	state->initialised = 0;
-
-	/* Check the first 5 registers to ensure this a revision we can handle */
-
-	i2c_readbytes(state, 0x00, buf, 5);
-	if (buf[0] != 0x04) goto error;		/* device id */
-	if (buf[1] != 0x02) goto error;		/* fab id */
-	if (buf[2] != 0x11) goto error;		/* month */
-	if (buf[3] != 0x20) goto error;		/* year msb */
-	if (buf[4] != 0x00) goto error;		/* year lsb */
-
-	/* create dvb_frontend */
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops nxt2002_ops = {
-
-	.info = {
-		.name = "Nextwave nxt2002 VSB/QAM frontend",
-		.type = FE_ATSC,
-		.frequency_min =  54000000,
-		.frequency_max = 860000000,
-		/* stepsize is just a guess */
-		.frequency_stepsize = 166666,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_8VSB | FE_CAN_QAM_64 | FE_CAN_QAM_256
-	},
-
-	.release = nxt2002_release,
-
-	.init = nxt2002_init,
-	.sleep = nxt2002_sleep,
-
-	.set_frontend = nxt2002_setup_frontend_parameters,
-	.get_tune_settings = nxt2002_get_tune_settings,
-
-	.read_status = nxt2002_read_status,
-	.read_ber = nxt2002_read_ber,
-	.read_signal_strength = nxt2002_read_signal_strength,
-	.read_snr = nxt2002_read_snr,
-	.read_ucblocks = nxt2002_read_ucblocks,
-
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("NXT2002 ATSC (8VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver");
-MODULE_AUTHOR("Taylor Jacob");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(nxt2002_attach);
diff --git a/drivers/media/dvb/frontends/nxt2002.h b/drivers/media/dvb/frontends/nxt2002.h
deleted file mode 100644
index 462301f577ee..000000000000
--- a/drivers/media/dvb/frontends/nxt2002.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
-   Driver for the Nxt2002 demodulator
-*/
-
-#ifndef NXT2002_H
-#define NXT2002_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-struct nxt2002_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* request firmware for device */
-	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
-};
-
-extern struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config,
-					   struct i2c_adapter* i2c);
-
-#endif // NXT2002_H
diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c
index 78d2b93d35b9..9e3535394509 100644
--- a/drivers/media/dvb/frontends/nxt200x.c
+++ b/drivers/media/dvb/frontends/nxt200x.c
@@ -1,9 +1,10 @@
 /*
  *    Support for NXT2002 and NXT2004 - VSB/QAM
  *
- *    Copyright (C) 2005 Kirk Lapray (kirk.lapray@gmail.com)
+ *    Copyright (C) 2005 Kirk Lapray <kirk.lapray@gmail.com>
+ *    Copyright (C) 2006 Michael Krufky <mkrufky@m1k.net>
  *    based on nxt2002 by Taylor Jacob <rtjacob@earthlink.net>
- *    and nxt2004 by Jean-Francois Thibert (jeanfrancois@sagetv.com)
+ *    and nxt2004 by Jean-Francois Thibert <jeanfrancois@sagetv.com>
  *
  *    This program is free software; you can redistribute it and/or modify
  *    it under the terms of the GNU General Public License as published by
@@ -614,7 +615,17 @@ static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
 	/* write sdm1 input */
 	buf[0] = 0x10;
 	buf[1] = 0x00;
-	nxt200x_writebytes(state, 0x58, buf, 2);
+	switch (state->demod_chip) {
+		case NXT2002:
+			nxt200x_writereg_multibyte(state, 0x58, buf, 2);
+			break;
+		case NXT2004:
+			nxt200x_writebytes(state, 0x58, buf, 2);
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
 
 	/* write sdmx input */
 	switch (p->u.vsb.modulation) {
@@ -632,7 +643,17 @@ static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
 				break;
 	}
 	buf[1] = 0x00;
-	nxt200x_writebytes(state, 0x5C, buf, 2);
+	switch (state->demod_chip) {
+		case NXT2002:
+			nxt200x_writereg_multibyte(state, 0x5C, buf, 2);
+			break;
+		case NXT2004:
+			nxt200x_writebytes(state, 0x5C, buf, 2);
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
 
 	/* write adc power lpf fc */
 	buf[0] = 0x05;
@@ -648,7 +669,17 @@ static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
 	/* write accumulator2 input */
 	buf[0] = 0x80;
 	buf[1] = 0x00;
-	nxt200x_writebytes(state, 0x4B, buf, 2);
+	switch (state->demod_chip) {
+		case NXT2002:
+			nxt200x_writereg_multibyte(state, 0x4B, buf, 2);
+			break;
+		case NXT2004:
+			nxt200x_writebytes(state, 0x4B, buf, 2);
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
 
 	/* write kg1 */
 	buf[0] = 0x00;
@@ -714,8 +745,19 @@ static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
 	/* write accumulator2 input */
 	buf[0] = 0x80;
 	buf[1] = 0x00;
-	nxt200x_writebytes(state, 0x49, buf,2);
-	nxt200x_writebytes(state, 0x4B, buf,2);
+	switch (state->demod_chip) {
+		case NXT2002:
+			nxt200x_writereg_multibyte(state, 0x49, buf, 2);
+			nxt200x_writereg_multibyte(state, 0x4B, buf, 2);
+			break;
+		case NXT2004:
+			nxt200x_writebytes(state, 0x49, buf, 2);
+			nxt200x_writebytes(state, 0x4B, buf, 2);
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
 
 	/* write agc control reg */
 	buf[0] = 0x04;
@@ -1199,7 +1241,7 @@ module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
 MODULE_DESCRIPTION("NXT200X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
-MODULE_AUTHOR("Kirk Lapray, Jean-Francois Thibert, and Taylor Jacob");
+MODULE_AUTHOR("Kirk Lapray, Michael Krufky, Jean-Francois Thibert, and Taylor Jacob");
 MODULE_LICENSE("GPL");
 
 EXPORT_SYMBOL(nxt200x_attach);
diff --git a/drivers/media/dvb/frontends/tda80xx.c b/drivers/media/dvb/frontends/tda80xx.c
deleted file mode 100644
index d1cabb6a0a13..000000000000
--- a/drivers/media/dvb/frontends/tda80xx.c
+++ /dev/null
@@ -1,734 +0,0 @@
-/*
- * tda80xx.c
- *
- * Philips TDA8044 / TDA8083 QPSK demodulator driver
- *
- * Copyright (C) 2001 Felix Domke <tmbinc@elitedvb.net>
- * Copyright (C) 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/config.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/threads.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <asm/irq.h>
-#include <asm/div64.h>
-
-#include "dvb_frontend.h"
-#include "tda80xx.h"
-
-enum {
-	ID_TDA8044 = 0x04,
-	ID_TDA8083 = 0x05,
-};
-
-
-struct tda80xx_state {
-
-	struct i2c_adapter* i2c;
-
-	struct dvb_frontend_ops ops;
-
-	/* configuration settings */
-	const struct tda80xx_config* config;
-
-	struct dvb_frontend frontend;
-
-	u32 clk;
-	int afc_loop;
-	struct work_struct worklet;
-	fe_code_rate_t code_rate;
-	fe_spectral_inversion_t spectral_inversion;
-	fe_status_t status;
-	u8 id;
-};
-
-static int debug = 1;
-#define dprintk	if (debug) printk
-
-static u8 tda8044_inittab_pre[] = {
-	0x02, 0x00, 0x6f, 0xb5, 0x86, 0x22, 0x00, 0xea,
-	0x30, 0x42, 0x98, 0x68, 0x70, 0x42, 0x99, 0x58,
-	0x95, 0x10, 0xf5, 0xe7, 0x93, 0x0b, 0x15, 0x68,
-	0x9a, 0x90, 0x61, 0x80, 0x00, 0xe0, 0x40, 0x00,
-	0x0f, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00
-};
-
-static u8 tda8044_inittab_post[] = {
-	0x04, 0x00, 0x6f, 0xb5, 0x86, 0x22, 0x00, 0xea,
-	0x30, 0x42, 0x98, 0x68, 0x70, 0x42, 0x99, 0x50,
-	0x95, 0x10, 0xf5, 0xe7, 0x93, 0x0b, 0x15, 0x68,
-	0x9a, 0x90, 0x61, 0x80, 0x00, 0xe0, 0x40, 0x6c,
-	0x0f, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00
-};
-
-static u8 tda8083_inittab[] = {
-	0x04, 0x00, 0x4a, 0x79, 0x04, 0x00, 0xff, 0xea,
-	0x48, 0x42, 0x79, 0x60, 0x70, 0x52, 0x9a, 0x10,
-	0x0e, 0x10, 0xf2, 0xa7, 0x93, 0x0b, 0x05, 0xc8,
-	0x9d, 0x00, 0x42, 0x80, 0x00, 0x60, 0x40, 0x00,
-	0x00, 0x75, 0x00, 0xe0, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00
-};
-
-static __inline__ u32 tda80xx_div(u32 a, u32 b)
-{
-	return (a + (b / 2)) / b;
-}
-
-static __inline__ u32 tda80xx_gcd(u32 a, u32 b)
-{
-	u32 r;
-
-	while ((r = a % b)) {
-		a = b;
-		b = r;
-	}
-
-	return b;
-}
-
-static int tda80xx_read(struct tda80xx_state* state, u8 reg, u8 *buf, u8 len)
-{
-	int ret;
-	struct i2c_msg msg[] = { { .addr = state->config->demod_address, .flags = 0, .buf = &reg, .len = 1 },
-			  { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } };
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-
-	if (ret != 2)
-		dprintk("%s: readreg error (reg %02x, ret == %i)\n",
-				__FUNCTION__, reg, ret);
-
-	mdelay(10);
-
-	return (ret == 2) ? 0 : -EREMOTEIO;
-}
-
-static int tda80xx_write(struct tda80xx_state* state, u8 reg, const u8 *buf, u8 len)
-{
-	int ret;
-	u8 wbuf[len + 1];
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = wbuf, .len = len + 1 };
-
-	wbuf[0] = reg;
-	memcpy(&wbuf[1], buf, len);
-
-	ret = i2c_transfer(state->i2c, &msg, 1);
-
-	if (ret != 1)
-		dprintk("%s: i2c xfer error (ret == %i)\n", __FUNCTION__, ret);
-
-	mdelay(10);
-
-	return (ret == 1) ? 0 : -EREMOTEIO;
-}
-
-static __inline__ u8 tda80xx_readreg(struct tda80xx_state* state, u8 reg)
-{
-	u8 val;
-
-	tda80xx_read(state, reg, &val, 1);
-
-	return val;
-}
-
-static __inline__ int tda80xx_writereg(struct tda80xx_state* state, u8 reg, u8 data)
-{
-	return tda80xx_write(state, reg, &data, 1);
-}
-
-static int tda80xx_set_parameters(struct tda80xx_state* state,
-				  fe_spectral_inversion_t inversion,
-				  u32 symbol_rate,
-				  fe_code_rate_t fec_inner)
-{
-	u8 buf[15];
-	u64 ratio;
-	u32 clk;
-	u32 k;
-	u32 sr = symbol_rate;
-	u32 gcd;
-	u8 scd;
-
-	if (symbol_rate > (state->clk * 3) / 16)
-		scd = 0;
-	else if (symbol_rate > (state->clk * 3) / 32)
-		scd = 1;
-	else if (symbol_rate > (state->clk * 3) / 64)
-		scd = 2;
-	else
-		scd = 3;
-
-	clk = scd ? (state->clk / (scd * 2)) : state->clk;
-
-	/*
-	 * Viterbi decoder:
-	 * Differential decoding off
-	 * Spectral inversion unknown
-	 * QPSK modulation
-	 */
-	if (inversion == INVERSION_ON)
-		buf[0] = 0x60;
-	else if (inversion == INVERSION_OFF)
-		buf[0] = 0x20;
-	else
-		buf[0] = 0x00;
-
-	/*
-	 * CLK ratio:
-	 * system clock frequency is up to 64 or 96 MHz
-	 *
-	 * formula:
-	 * r = k * clk / symbol_rate
-	 *
-	 * k:	2^21 for caa 0..3,
-	 *	2^20 for caa 4..5,
-	 *	2^19 for caa 6..7
-	 */
-	if (symbol_rate <= (clk * 3) / 32)
-		k = (1 << 19);
-	else if (symbol_rate <= (clk * 3) / 16)
-		k = (1 << 20);
-	else
-		k = (1 << 21);
-
-	gcd = tda80xx_gcd(clk, sr);
-	clk /= gcd;
-	sr /= gcd;
-
-	gcd = tda80xx_gcd(k, sr);
-	k /= gcd;
-	sr /= gcd;
-
-	ratio = (u64)k * (u64)clk;
-	do_div(ratio, sr);
-
-	buf[1] = ratio >> 16;
-	buf[2] = ratio >> 8;
-	buf[3] = ratio;
-
-	/* nyquist filter roll-off factor 35% */
-	buf[4] = 0x20;
-
-	clk = scd ? (state->clk / (scd * 2)) : state->clk;
-
-	/* Anti Alias Filter */
-	if (symbol_rate < (clk * 3) / 64)
-		printk("tda80xx: unsupported symbol rate: %u\n", symbol_rate);
-	else if (symbol_rate <= clk / 16)
-		buf[4] |= 0x07;
-	else if (symbol_rate <= (clk * 3) / 32)
-		buf[4] |= 0x06;
-	else if (symbol_rate <= clk / 8)
-		buf[4] |= 0x05;
-	else if (symbol_rate <= (clk * 3) / 16)
-		buf[4] |= 0x04;
-	else if (symbol_rate <= clk / 4)
-		buf[4] |= 0x03;
-	else if (symbol_rate <= (clk * 3) / 8)
-		buf[4] |= 0x02;
-	else if (symbol_rate <= clk / 2)
-		buf[4] |= 0x01;
-	else
-		buf[4] |= 0x00;
-
-	/* Sigma Delta converter */
-	buf[5] = 0x00;
-
-	/* FEC: Possible puncturing rates */
-	if (fec_inner == FEC_NONE)
-		buf[6] = 0x00;
-	else if ((fec_inner >= FEC_1_2) && (fec_inner <= FEC_8_9))
-		buf[6] = (1 << (8 - fec_inner));
-	else if (fec_inner == FEC_AUTO)
-		buf[6] = 0xff;
-	else
-		return -EINVAL;
-
-	/* carrier lock detector threshold value */
-	buf[7] = 0x30;
-	/* AFC1: proportional part settings */
-	buf[8] = 0x42;
-	/* AFC1: integral part settings */
-	buf[9] = 0x98;
-	/* PD: Leaky integrator SCPC mode */
-	buf[10] = 0x28;
-	/* AFC2, AFC1 controls */
-	buf[11] = 0x30;
-	/* PD: proportional part settings */
-	buf[12] = 0x42;
-	/* PD: integral part settings */
-	buf[13] = 0x99;
-	/* AGC */
-	buf[14] = 0x50 | scd;
-
-	printk("symbol_rate=%u clk=%u\n", symbol_rate, clk);
-
-	return tda80xx_write(state, 0x01, buf, sizeof(buf));
-}
-
-static int tda80xx_set_clk(struct tda80xx_state* state)
-{
-	u8 buf[2];
-
-	/* CLK proportional part */
-	buf[0] = (0x06 << 5) | 0x08;	/* CMP[2:0], CSP[4:0] */
-	/* CLK integral part */
-	buf[1] = (0x04 << 5) | 0x1a;	/* CMI[2:0], CSI[4:0] */
-
-	return tda80xx_write(state, 0x17, buf, sizeof(buf));
-}
-
-#if 0
-static int tda80xx_set_scpc_freq_offset(struct tda80xx_state* state)
-{
-	/* a constant value is nonsense here imho */
-	return tda80xx_writereg(state, 0x22, 0xf9);
-}
-#endif
-
-static int tda80xx_close_loop(struct tda80xx_state* state)
-{
-	u8 buf[2];
-
-	/* PD: Loop closed, LD: lock detect enable, SCPC: Sweep mode - AFC1 loop closed */
-	buf[0] = 0x68;
-	/* AFC1: Loop closed, CAR Feedback: 8192 */
-	buf[1] = 0x70;
-
-	return tda80xx_write(state, 0x0b, buf, sizeof(buf));
-}
-
-static irqreturn_t tda80xx_irq(int irq, void *priv, struct pt_regs *pt)
-{
-	schedule_work(priv);
-
-	return IRQ_HANDLED;
-}
-
-static void tda80xx_read_status_int(struct tda80xx_state* state)
-{
-	u8 val;
-
-	static const fe_spectral_inversion_t inv_tab[] = {
-		INVERSION_OFF, INVERSION_ON
-	};
-
-	static const fe_code_rate_t fec_tab[] = {
-		FEC_8_9, FEC_1_2, FEC_2_3, FEC_3_4,
-		FEC_4_5, FEC_5_6, FEC_6_7, FEC_7_8,
-	};
-
-	val = tda80xx_readreg(state, 0x02);
-
-	state->status = 0;
-
-	if (val & 0x01) /* demodulator lock */
-		state->status |= FE_HAS_SIGNAL;
-	if (val & 0x02) /* clock recovery lock */
-		state->status |= FE_HAS_CARRIER;
-	if (val & 0x04) /* viterbi lock */
-		state->status |= FE_HAS_VITERBI;
-	if (val & 0x08) /* deinterleaver lock (packet sync) */
-		state->status |= FE_HAS_SYNC;
-	if (val & 0x10) /* derandomizer lock (frame sync) */
-		state->status |= FE_HAS_LOCK;
-	if (val & 0x20) /* frontend can not lock */
-		state->status |= FE_TIMEDOUT;
-
-	if ((state->status & (FE_HAS_CARRIER)) && (state->afc_loop)) {
-		printk("tda80xx: closing loop\n");
-		tda80xx_close_loop(state);
-		state->afc_loop = 0;
-	}
-
-	if (state->status & (FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK)) {
-		val = tda80xx_readreg(state, 0x0e);
-		state->code_rate = fec_tab[val & 0x07];
-		if (state->status & (FE_HAS_SYNC | FE_HAS_LOCK))
-			state->spectral_inversion = inv_tab[(val >> 7) & 0x01];
-		else
-			state->spectral_inversion = INVERSION_AUTO;
-	}
-	else {
-		state->code_rate = FEC_AUTO;
-	}
-}
-
-static void tda80xx_worklet(void *priv)
-{
-	struct tda80xx_state *state = priv;
-
-	tda80xx_writereg(state, 0x00, 0x04);
-	enable_irq(state->config->irq);
-
-	tda80xx_read_status_int(state);
-}
-
-static void tda80xx_wait_diseqc_fifo(struct tda80xx_state* state)
-{
-	size_t i;
-
-	for (i = 0; i < 100; i++) {
-		if (tda80xx_readreg(state, 0x02) & 0x80)
-			break;
-		msleep(10);
-	}
-}
-
-static int tda8044_init(struct dvb_frontend* fe)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-	int ret;
-
-	/*
-	 * this function is a mess...
-	 */
-
-	if ((ret = tda80xx_write(state, 0x00, tda8044_inittab_pre, sizeof(tda8044_inittab_pre))))
-		return ret;
-
-	tda80xx_writereg(state, 0x0f, 0x50);
-#if 1
-	tda80xx_writereg(state, 0x20, 0x8F);		/* FIXME */
-	tda80xx_writereg(state, 0x20, state->config->volt18setting);	/* FIXME */
-	//tda80xx_writereg(state, 0x00, 0x04);
-	tda80xx_writereg(state, 0x00, 0x0C);
-#endif
-	//tda80xx_writereg(state, 0x00, 0x08); /* Reset AFC1 loop filter */
-
-	tda80xx_write(state, 0x00, tda8044_inittab_post, sizeof(tda8044_inittab_post));
-
-	if (state->config->pll_init) {
-		tda80xx_writereg(state, 0x1c, 0x80);
-		state->config->pll_init(fe);
-		tda80xx_writereg(state, 0x1c, 0x00);
-	}
-
-	return 0;
-}
-
-static int tda8083_init(struct dvb_frontend* fe)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	tda80xx_write(state, 0x00, tda8083_inittab, sizeof(tda8083_inittab));
-
-	if (state->config->pll_init) {
-		tda80xx_writereg(state, 0x1c, 0x80);
-		state->config->pll_init(fe);
-		tda80xx_writereg(state, 0x1c, 0x00);
-	}
-
-	return 0;
-}
-
-static int tda80xx_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	switch (voltage) {
-	case SEC_VOLTAGE_13:
-		return tda80xx_writereg(state, 0x20, state->config->volt13setting);
-	case SEC_VOLTAGE_18:
-		return tda80xx_writereg(state, 0x20, state->config->volt18setting);
-	case SEC_VOLTAGE_OFF:
-		return tda80xx_writereg(state, 0x20, 0);
-	default:
-		return -EINVAL;
-	}
-}
-
-static int tda80xx_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	switch (tone) {
-	case SEC_TONE_OFF:
-		return tda80xx_writereg(state, 0x29, 0x00);
-	case SEC_TONE_ON:
-		return tda80xx_writereg(state, 0x29, 0x80);
-	default:
-		return -EINVAL;
-	}
-}
-
-static int tda80xx_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	if (cmd->msg_len > 6)
-		return -EINVAL;
-
-	tda80xx_writereg(state, 0x29, 0x08 | (cmd->msg_len - 3));
-	tda80xx_write(state, 0x23, cmd->msg, cmd->msg_len);
-	tda80xx_writereg(state, 0x29, 0x0c | (cmd->msg_len - 3));
-	tda80xx_wait_diseqc_fifo(state);
-
-	return 0;
-}
-
-static int tda80xx_send_diseqc_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t cmd)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	switch (cmd) {
-	case SEC_MINI_A:
-		tda80xx_writereg(state, 0x29, 0x14);
-		break;
-	case SEC_MINI_B:
-		tda80xx_writereg(state, 0x29, 0x1c);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	tda80xx_wait_diseqc_fifo(state);
-
-	return 0;
-}
-
-static int tda80xx_sleep(struct dvb_frontend* fe)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	tda80xx_writereg(state, 0x00, 0x02);	/* enter standby */
-
-	return 0;
-}
-
-static int tda80xx_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	tda80xx_writereg(state, 0x1c, 0x80);
-	state->config->pll_set(fe, p);
-	tda80xx_writereg(state, 0x1c, 0x00);
-
-	tda80xx_set_parameters(state, p->inversion, p->u.qpsk.symbol_rate, p->u.qpsk.fec_inner);
-	tda80xx_set_clk(state);
-	//tda80xx_set_scpc_freq_offset(state);
-	state->afc_loop = 1;
-
-	return 0;
-}
-
-static int tda80xx_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	if (!state->config->irq)
-		tda80xx_read_status_int(state);
-
-	p->inversion = state->spectral_inversion;
-	p->u.qpsk.fec_inner = state->code_rate;
-
-	return 0;
-}
-
-static int tda80xx_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	if (!state->config->irq)
-		tda80xx_read_status_int(state);
-	*status = state->status;
-
-	return 0;
-}
-
-static int tda80xx_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-	int ret;
-	u8 buf[3];
-
-	if ((ret = tda80xx_read(state, 0x0b, buf, sizeof(buf))))
-		return ret;
-
-	*ber = ((buf[0] & 0x1f) << 16) | (buf[1] << 8) | buf[2];
-
-	return 0;
-}
-
-static int tda80xx_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	u8 gain = ~tda80xx_readreg(state, 0x01);
-	*strength = (gain << 8) | gain;
-
-	return 0;
-}
-
-static int tda80xx_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	u8 quality = tda80xx_readreg(state, 0x08);
-	*snr = (quality << 8) | quality;
-
-	return 0;
-}
-
-static int tda80xx_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	*ucblocks = tda80xx_readreg(state, 0x0f);
-	if (*ucblocks == 0xff)
-		*ucblocks = 0xffffffff;
-
-	return 0;
-}
-
-static int tda80xx_init(struct dvb_frontend* fe)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	switch(state->id) {
-	case ID_TDA8044:
-		return tda8044_init(fe);
-
-	case ID_TDA8083:
-		return tda8083_init(fe);
-	}
-	return 0;
-}
-
-static void tda80xx_release(struct dvb_frontend* fe)
-{
-	struct tda80xx_state* state = fe->demodulator_priv;
-
-	if (state->config->irq)
-		free_irq(state->config->irq, &state->worklet);
-
-	kfree(state);
-}
-
-static struct dvb_frontend_ops tda80xx_ops;
-
-struct dvb_frontend* tda80xx_attach(const struct tda80xx_config* config,
-				    struct i2c_adapter* i2c)
-{
-	struct tda80xx_state* state = NULL;
-	int ret;
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct tda80xx_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	memcpy(&state->ops, &tda80xx_ops, sizeof(struct dvb_frontend_ops));
-	state->spectral_inversion = INVERSION_AUTO;
-	state->code_rate = FEC_AUTO;
-	state->status = 0;
-	state->afc_loop = 0;
-
-	/* check if the demod is there */
-	if (tda80xx_writereg(state, 0x89, 0x00) < 0) goto error;
-	state->id = tda80xx_readreg(state, 0x00);
-
-	switch (state->id) {
-	case ID_TDA8044:
-		state->clk = 96000000;
-		printk("tda80xx: Detected tda8044\n");
-		break;
-
-	case ID_TDA8083:
-		state->clk = 64000000;
-		printk("tda80xx: Detected tda8083\n");
-		break;
-
-	default:
-		goto error;
-	}
-
-	/* setup IRQ */
-	if (state->config->irq) {
-		INIT_WORK(&state->worklet, tda80xx_worklet, state);
-		if ((ret = request_irq(state->config->irq, tda80xx_irq, SA_ONESHOT, "tda80xx", &state->worklet)) < 0) {
-			printk(KERN_ERR "tda80xx: request_irq failed (%d)\n", ret);
-			goto error;
-		}
-	}
-
-	/* create dvb_frontend */
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops tda80xx_ops = {
-
-	.info = {
-		.name = "Philips TDA80xx DVB-S",
-		.type = FE_QPSK,
-		.frequency_min = 500000,
-		.frequency_max = 2700000,
-		.frequency_stepsize = 125,
-		.symbol_rate_min = 4500000,
-		.symbol_rate_max = 45000000,
-		.caps =	FE_CAN_INVERSION_AUTO |
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
-			FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK |
-			FE_CAN_MUTE_TS
-	},
-
-	.release = tda80xx_release,
-
-	.init = tda80xx_init,
-	.sleep = tda80xx_sleep,
-
-	.set_frontend = tda80xx_set_frontend,
-	.get_frontend = tda80xx_get_frontend,
-
-	.read_status = tda80xx_read_status,
-	.read_ber = tda80xx_read_ber,
-	.read_signal_strength = tda80xx_read_signal_strength,
-	.read_snr = tda80xx_read_snr,
-	.read_ucblocks = tda80xx_read_ucblocks,
-
-	.diseqc_send_master_cmd = tda80xx_send_diseqc_msg,
-	.diseqc_send_burst = tda80xx_send_diseqc_burst,
-	.set_tone = tda80xx_set_tone,
-	.set_voltage = tda80xx_set_voltage,
-};
-
-module_param(debug, int, 0644);
-
-MODULE_DESCRIPTION("Philips TDA8044 / TDA8083 DVB-S Demodulator driver");
-MODULE_AUTHOR("Felix Domke, Andreas Oberritter");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(tda80xx_attach);
diff --git a/drivers/media/dvb/frontends/tda80xx.h b/drivers/media/dvb/frontends/tda80xx.h
deleted file mode 100644
index cd639a0aad55..000000000000
--- a/drivers/media/dvb/frontends/tda80xx.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * tda80xx.c
- *
- * Philips TDA8044 / TDA8083 QPSK demodulator driver
- *
- * Copyright (C) 2001 Felix Domke <tmbinc@elitedvb.net>
- * Copyright (C) 2002-2004 Andreas Oberritter <obi@linuxtv.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef TDA80XX_H
-#define TDA80XX_H
-
-#include <linux/dvb/frontend.h>
-
-struct tda80xx_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* IRQ to use (0=>no IRQ used) */
-	u32 irq;
-
-	/* Register setting to use for 13v */
-	u8 volt13setting;
-
-	/* Register setting to use for 18v */
-	u8 volt18setting;
-
-	/* PLL maintenance */
-	int (*pll_init)(struct dvb_frontend* fe);
-	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
-};
-
-extern struct dvb_frontend* tda80xx_attach(const struct tda80xx_config* config,
-					   struct i2c_adapter* i2c);
-
-#endif // TDA80XX_H
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 27494901975f..d36369e9e88f 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -2329,6 +2329,17 @@ static int frontend_init(struct av7110 *av7110)
 			av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
 			break;
 
+		case 0x0004: // Galaxis DVB-S rev1.3
+			/* ALPS BSRV2 */
+			av7110->fe = ves1x93_attach(&alps_bsrv2_config, &av7110->i2c_adap);
+			if (av7110->fe) {
+				av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
+				av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst;
+				av7110->fe->ops->set_tone = av7110_set_tone;
+				av7110->recover = dvb_s_recover;
+			}
+			break;
+
 		case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */
 			/* Grundig 29504-451 */
 			av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
@@ -2930,6 +2941,7 @@ MAKE_AV7110_INFO(tts_1_3se,  "Technotrend/Hauppauge WinTV DVB-S rev1.3 SE");
 MAKE_AV7110_INFO(ttt,        "Technotrend/Hauppauge DVB-T");
 MAKE_AV7110_INFO(fsc,        "Fujitsu Siemens DVB-C");
 MAKE_AV7110_INFO(fss,        "Fujitsu Siemens DVB-S rev1.6");
+MAKE_AV7110_INFO(gxs_1_3,    "Galaxis DVB-S rev1.3");
 
 static struct pci_device_id pci_tbl[] = {
 	MAKE_EXTENSION_PCI(fsc,         0x110a, 0x0000),
@@ -2937,13 +2949,13 @@ static struct pci_device_id pci_tbl[] = {
 	MAKE_EXTENSION_PCI(ttt_1_X,     0x13c2, 0x0001),
 	MAKE_EXTENSION_PCI(ttc_2_X,     0x13c2, 0x0002),
 	MAKE_EXTENSION_PCI(tts_2_X,     0x13c2, 0x0003),
+	MAKE_EXTENSION_PCI(gxs_1_3,     0x13c2, 0x0004),
 	MAKE_EXTENSION_PCI(fss,         0x13c2, 0x0006),
 	MAKE_EXTENSION_PCI(ttt,         0x13c2, 0x0008),
 	MAKE_EXTENSION_PCI(ttc_1_X,     0x13c2, 0x000a),
 	MAKE_EXTENSION_PCI(tts_2_3,     0x13c2, 0x000e),
 	MAKE_EXTENSION_PCI(tts_1_3se,   0x13c2, 0x1002),
 
-/*	MAKE_EXTENSION_PCI(???, 0x13c2, 0x0004), UNDEFINED CARD */ // Galaxis DVB PC-Sat-Carte
 /*	MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1
 /*	MAKE_EXTENSION_PCI(???, 0x13c2, 0x0009), UNDEFINED CARD */ // TT/Hauppauge WinTV Nexus-CA v????
 
diff --git a/drivers/media/dvb/ttpci/av7110.h b/drivers/media/dvb/ttpci/av7110.h
index 6ea30df2e823..fafd25fab835 100644
--- a/drivers/media/dvb/ttpci/av7110.h
+++ b/drivers/media/dvb/ttpci/av7110.h
@@ -273,8 +273,6 @@ struct av7110 {
 extern int ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid,
 		       u16 subpid, u16 pcrpid);
 
-extern int av7110_setup_irc_config (struct av7110 *av7110, u32 ir_config);
-
 extern int av7110_ir_init(struct av7110 *av7110);
 extern void av7110_ir_exit(struct av7110 *av7110);
 
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index 9138132ad25f..617e4f6c0ed7 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -155,6 +155,19 @@ static void input_repeat_key(unsigned long data)
 }
 
 
+static int av7110_setup_irc_config(struct av7110 *av7110, u32 ir_config)
+{
+	int ret = 0;
+
+	dprintk(4, "%p\n", av7110);
+	if (av7110) {
+		ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetIR, 1, ir_config);
+		av7110->ir_config = ir_config;
+	}
+	return ret;
+}
+
+
 static int av7110_ir_write_proc(struct file *file, const char __user *buffer,
 				unsigned long count, void *data)
 {
@@ -187,19 +200,6 @@ static int av7110_ir_write_proc(struct file *file, const char __user *buffer,
 }
 
 
-int av7110_setup_irc_config(struct av7110 *av7110, u32 ir_config)
-{
-	int ret = 0;
-
-	dprintk(4, "%p\n", av7110);
-	if (av7110) {
-		ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetIR, 1, ir_config);
-		av7110->ir_config = ir_config;
-	}
-	return ret;
-}
-
-
 static void ir_handler(struct av7110 *av7110, u32 ircom)
 {
 	dprintk(4, "ircommand = %08x\n", ircom);
diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bttv-driver.c
index aa4c4c521880..578b20085082 100644
--- a/drivers/media/video/bttv-driver.c
+++ b/drivers/media/video/bttv-driver.c
@@ -214,7 +214,7 @@ const struct bttv_tvnorm bttv_tvnorms[] = {
 		   we can capture, of the first and second field. */
 		.vbistart	= { 7,320 },
 	},{
-		.v4l2_id        = V4L2_STD_NTSC_M,
+		.v4l2_id        = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
 		.name           = "NTSC",
 		.Fsc            = 28636363,
 		.swidth         = 768,
diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c
index 297c32ab51e3..840fe0177121 100644
--- a/drivers/media/video/compat_ioctl32.c
+++ b/drivers/media/video/compat_ioctl32.c
@@ -167,29 +167,32 @@ static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user
 	if (kp->clipcount > 2048)
 		return -EINVAL;
 	if (kp->clipcount) {
-		struct v4l2_clip32 *uclips = compat_ptr(up->clips);
-		struct v4l2_clip *kclips;
+		struct v4l2_clip32 __user *uclips;
+		struct v4l2_clip __user *kclips;
 		int n = kp->clipcount;
+		compat_caddr_t p;
 
+		if (get_user(p, &up->clips))
+			return -EFAULT;
+		uclips = compat_ptr(p);
 		kclips = compat_alloc_user_space(n * sizeof(struct v4l2_clip));
 		kp->clips = kclips;
 		while (--n >= 0) {
-			if (!access_ok(VERIFY_READ, &uclips->c, sizeof(uclips->c)) ||
-				copy_from_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
+			if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c)))
+				return -EFAULT;
+			if (put_user(n ? kclips + 1 : NULL, &kclips->next))
 				return -EFAULT;
-			kclips->next = n ? kclips + 1 : 0;
 			uclips += 1;
 			kclips += 1;
 		}
 	} else
-		kp->clips = 0;
+		kp->clips = NULL;
 	return 0;
 }
 
 static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_window32)) ||
-		copy_to_user(&up->w, &kp->w, sizeof(up->w)) ||
+	if (copy_to_user(&up->w, &kp->w, sizeof(up->w)) ||
 		put_user(kp->field, &up->field) ||
 		put_user(kp->chromakey, &up->chromakey) ||
 		put_user(kp->clipcount, &up->clipcount))
@@ -199,33 +202,29 @@ static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user
 
 static inline int get_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pix_format __user *up)
 {
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_pix_format)) ||
-		copy_from_user(kp, up, sizeof(struct v4l2_pix_format)))
-			return -EFAULT;
+	if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format)))
+		return -EFAULT;
 	return 0;
 }
 
 static inline int put_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pix_format __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_pix_format)) ||
-		copy_to_user(up, kp, sizeof(struct v4l2_pix_format)))
-			return -EFAULT;
+	if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format)))
+		return -EFAULT;
 	return 0;
 }
 
 static inline int get_v4l2_vbi_format(struct v4l2_vbi_format *kp, struct v4l2_vbi_format __user *up)
 {
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_vbi_format)) ||
-		copy_from_user(kp, up, sizeof(struct v4l2_vbi_format)))
-			return -EFAULT;
+	if (copy_from_user(kp, up, sizeof(struct v4l2_vbi_format)))
+		return -EFAULT;
 	return 0;
 }
 
 static inline int put_v4l2_vbi_format(struct v4l2_vbi_format *kp, struct v4l2_vbi_format __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_vbi_format)) ||
-		copy_to_user(up, kp, sizeof(struct v4l2_vbi_format)))
-			return -EFAULT;
+	if (copy_to_user(up, kp, sizeof(struct v4l2_vbi_format)))
+		return -EFAULT;
 	return 0;
 }
 
@@ -279,18 +278,16 @@ static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user
 
 static inline int get_v4l2_standard(struct v4l2_standard *kp, struct v4l2_standard __user *up)
 {
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_standard)) ||
-		copy_from_user(kp, up, sizeof(struct v4l2_standard)))
-			return -EFAULT;
+	if (copy_from_user(kp, up, sizeof(struct v4l2_standard)))
+		return -EFAULT;
 	return 0;
 
 }
 
 static inline int put_v4l2_standard(struct v4l2_standard *kp, struct v4l2_standard __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_standard)) ||
-		copy_to_user(up, kp, sizeof(struct v4l2_standard)))
-			return -EFAULT;
+	if (copy_to_user(up, kp, sizeof(struct v4l2_standard)))
+		return -EFAULT;
 	return 0;
 }
 
@@ -328,18 +325,16 @@ static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32
 
 static inline int get_v4l2_tuner(struct v4l2_tuner *kp, struct v4l2_tuner __user *up)
 {
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_tuner)) ||
-		copy_from_user(kp, up, sizeof(struct v4l2_tuner)))
-			return -EFAULT;
+	if (copy_from_user(kp, up, sizeof(struct v4l2_tuner)))
+		return -EFAULT;
 	return 0;
 
 }
 
 static inline int put_v4l2_tuner(struct v4l2_tuner *kp, struct v4l2_tuner __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_tuner)) ||
-		copy_to_user(up, kp, sizeof(struct v4l2_tuner)))
-			return -EFAULT;
+	if (copy_to_user(up, kp, sizeof(struct v4l2_tuner)))
+		return -EFAULT;
 	return 0;
 }
 
@@ -380,11 +375,13 @@ static int get_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user
 		break;
 	case V4L2_MEMORY_USERPTR:
 		{
-		unsigned long tmp = (unsigned long)compat_ptr(up->m.userptr);
+		compat_long_t tmp;
 
-		if(get_user(kp->length, &up->length) ||
-			get_user(kp->m.userptr, &tmp))
-				return -EFAULT;
+		if (get_user(kp->length, &up->length) ||
+		    get_user(tmp, &up->m.userptr))
+			return -EFAULT;
+
+		kp->m.userptr = (unsigned long)compat_ptr(tmp);
 		}
 		break;
 	case V4L2_MEMORY_OVERLAY:
@@ -468,33 +465,29 @@ static int put_v4l2_framebuffer32(struct v4l2_framebuffer *kp, struct v4l2_frame
 
 static inline int get_v4l2_input32(struct v4l2_input *kp, struct v4l2_input __user *up)
 {
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_input) - 4) ||
-		copy_from_user(kp, up, sizeof(struct v4l2_input) - 4))
-			return -EFAULT;
+	if (copy_from_user(kp, up, sizeof(struct v4l2_input) - 4))
+		return -EFAULT;
 	return 0;
 }
 
 static inline int put_v4l2_input32(struct v4l2_input *kp, struct v4l2_input __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_input) - 4) ||
-		copy_to_user(up, kp, sizeof(struct v4l2_input) - 4))
-			return -EFAULT;
+	if (copy_to_user(up, kp, sizeof(struct v4l2_input) - 4))
+		return -EFAULT;
 	return 0;
 }
 
 static inline int get_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user *up)
 {
-	if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_input)) ||
-		copy_from_user(kp, up, sizeof(struct v4l2_input)))
-			return -EFAULT;
+	if (copy_from_user(kp, up, sizeof(struct v4l2_input)))
+		return -EFAULT;
 	return 0;
 }
 
 static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user *up)
 {
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_input)) ||
-		copy_to_user(up, kp, sizeof(struct v4l2_input)))
-			return -EFAULT;
+	if (copy_to_user(up, kp, sizeof(struct v4l2_input)))
+		return -EFAULT;
 	return 0;
 }
 
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index c66c2c1f4809..08ffd1f325fc 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -220,33 +220,23 @@ static void input_change(struct i2c_client *client)
 		cx25840_write(client, 0x808, 0xff);
 		cx25840_write(client, 0x80b, 0x10);
 	} else if (std & V4L2_STD_NTSC) {
-		/* NTSC */
-		if (state->pvr150_workaround) {
-			/* Certain Hauppauge PVR150 models have a hardware bug
-			   that causes audio to drop out. For these models the
-			   audio standard must be set explicitly.
-			   To be precise: it affects cards with tuner models
-			   85, 99 and 112 (model numbers from tveeprom). */
-			if (std == V4L2_STD_NTSC_M_JP) {
-				/* Japan uses EIAJ audio standard */
-				cx25840_write(client, 0x808, 0x2f);
-			} else {
-				/* Others use the BTSC audio standard */
-				cx25840_write(client, 0x808, 0x1f);
-			}
-			/* South Korea uses the A2-M (aka Zweiton M) audio
-			   standard, and should set 0x808 to 0x3f, but I don't
-			   know how to detect this. */
-		} else if (std == V4L2_STD_NTSC_M_JP) {
+		/* Certain Hauppauge PVR150 models have a hardware bug
+		   that causes audio to drop out. For these models the
+		   audio standard must be set explicitly.
+		   To be precise: it affects cards with tuner models
+		   85, 99 and 112 (model numbers from tveeprom). */
+		int hw_fix = state->pvr150_workaround;
+
+		if (std == V4L2_STD_NTSC_M_JP) {
 			/* Japan uses EIAJ audio standard */
-			cx25840_write(client, 0x808, 0xf7);
+			cx25840_write(client, 0x808, hw_fix ? 0x2f : 0xf7);
+		} else if (std == V4L2_STD_NTSC_M_KR) {
+			/* South Korea uses A2 audio standard */
+			cx25840_write(client, 0x808, hw_fix ? 0x3f : 0xf8);
 		} else {
 			/* Others use the BTSC audio standard */
-			cx25840_write(client, 0x808, 0xf6);
+			cx25840_write(client, 0x808, hw_fix ? 0x1f : 0xf6);
 		}
-		/* South Korea uses the A2-M (aka Zweiton M) audio standard,
-		   and should set 0x808 to 0xf8, but I don't know how to
-		   detect this. */
 		cx25840_write(client, 0x80b, 0x00);
 	}
 
@@ -330,17 +320,17 @@ static int set_v4lstd(struct i2c_client *client, v4l2_std_id std)
 	u8 fmt=0; 	/* zero is autodetect */
 
 	/* First tests should be against specific std */
-	if (std & V4L2_STD_NTSC_M_JP) {
+	if (std == V4L2_STD_NTSC_M_JP) {
 		fmt=0x2;
-	} else if (std & V4L2_STD_NTSC_443) {
+	} else if (std == V4L2_STD_NTSC_443) {
 		fmt=0x3;
-	} else if (std & V4L2_STD_PAL_M) {
+	} else if (std == V4L2_STD_PAL_M) {
 		fmt=0x5;
-	} else if (std & V4L2_STD_PAL_N) {
+	} else if (std == V4L2_STD_PAL_N) {
 		fmt=0x6;
-	} else if (std & V4L2_STD_PAL_Nc) {
+	} else if (std == V4L2_STD_PAL_Nc) {
 		fmt=0x7;
-	} else if (std & V4L2_STD_PAL_60) {
+	} else if (std == V4L2_STD_PAL_60) {
 		fmt=0x8;
 	} else {
 		/* Then, test against generic ones */
@@ -369,7 +359,7 @@ v4l2_std_id cx25840_get_v4lstd(struct i2c_client * client)
 	}
 
 	switch (fmt) {
-	case 0x1: return V4L2_STD_NTSC_M;
+	case 0x1: return V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR;
 	case 0x2: return V4L2_STD_NTSC_M_JP;
 	case 0x3: return V4L2_STD_NTSC_443;
 	case 0x4: return V4L2_STD_PAL;
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 53308911ae6e..e99dfbbf3e95 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -32,6 +32,7 @@ config VIDEO_CX88_DVB
 config VIDEO_CX88_ALSA
 	tristate "ALSA DMA audio support"
 	depends on VIDEO_CX88 && SND && EXPERIMENTAL
+	select SND_PCM
 	---help---
 	  This is a video4linux driver for direct (DMA) audio on
 	  Conexant 2388x based TV cards.
@@ -48,6 +49,7 @@ config VIDEO_CX88_DVB_ALL_FRONTENDS
 	default y
 	depends on VIDEO_CX88_DVB
 	select DVB_MT352
+	select VIDEO_CX88_VP3054
 	select DVB_OR51132
 	select DVB_CX22702
 	select DVB_LGDT330X
@@ -69,6 +71,16 @@ config VIDEO_CX88_DVB_MT352
 	  This adds DVB-T support for cards based on the
 	  Connexant 2388x chip and the MT352 demodulator.
 
+config VIDEO_CX88_VP3054
+	tristate "VP-3054 Secondary I2C Bus Support"
+	default m
+	depends on DVB_MT352
+	---help---
+	  This adds DVB-T support for cards based on the
+	  Connexant 2388x chip and the MT352 demodulator,
+	  which also require support for the VP-3054
+	  Secondary I2C bus, such at DNTV Live! DVB-T Pro.
+
 config VIDEO_CX88_DVB_OR51132
 	bool "OR51132 ATSC Support"
 	default y
diff --git a/drivers/media/video/cx88/Makefile b/drivers/media/video/cx88/Makefile
index 6e5eaa22619e..2b902784facc 100644
--- a/drivers/media/video/cx88/Makefile
+++ b/drivers/media/video/cx88/Makefile
@@ -4,8 +4,9 @@ cx8800-objs	:= cx88-video.o cx88-vbi.o
 cx8802-objs	:= cx88-mpeg.o
 
 obj-$(CONFIG_VIDEO_CX88) += cx88xx.o cx8800.o cx8802.o cx88-blackbird.o
-obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o cx88-vp3054-i2c.o
+obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o
 obj-$(CONFIG_VIDEO_CX88_ALSA) += cx88-alsa.o
+obj-$(CONFIG_VIDEO_CX88_VP3054) += cx88-vp3054-i2c.o
 
 EXTRA_CFLAGS += -I$(src)/..
 EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
@@ -18,6 +19,6 @@ extra-cflags-$(CONFIG_DVB_LGDT330X)  += -DHAVE_LGDT330X=1
 extra-cflags-$(CONFIG_DVB_MT352)     += -DHAVE_MT352=1
 extra-cflags-$(CONFIG_DVB_NXT200X)   += -DHAVE_NXT200X=1
 extra-cflags-$(CONFIG_DVB_CX24123)   += -DHAVE_CX24123=1
-extra-cflags-$(CONFIG_VIDEO_CX88_DVB)+= -DHAVE_VP3054_I2C=1
+extra-cflags-$(CONFIG_VIDEO_CX88_VP3054)+= -DHAVE_VP3054_I2C=1
 
 EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index a2e36a1e5f59..2acccd6d49bc 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -128,7 +128,7 @@ MODULE_PARM_DESC(debug,"enable debug messages");
  * BOARD Specific: Sets audio DMA
  */
 
-int _cx88_start_audio_dma(snd_cx88_card_t *chip)
+static int _cx88_start_audio_dma(snd_cx88_card_t *chip)
 {
 	struct cx88_buffer   *buf = chip->buf;
 	struct cx88_core *core=chip->core;
@@ -173,7 +173,7 @@ int _cx88_start_audio_dma(snd_cx88_card_t *chip)
 /*
  * BOARD Specific: Resets audio DMA
  */
-int _cx88_stop_audio_dma(snd_cx88_card_t *chip)
+static int _cx88_stop_audio_dma(snd_cx88_card_t *chip)
 {
 	struct cx88_core *core=chip->core;
 	dprintk(1, "Stopping audio DMA\n");
@@ -613,7 +613,7 @@ static snd_kcontrol_new_t snd_cx88_capture_volume = {
  * Only boards with eeprom and byte 1 at eeprom=1 have it
  */
 
-struct pci_device_id cx88_audio_pci_tbl[] = {
+static struct pci_device_id cx88_audio_pci_tbl[] = {
 	{0x14f1,0x8801,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0x14f1,0x8811,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0, }
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index ad2f565f522c..1bc999247fdc 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1246,6 +1246,11 @@ struct cx88_subid cx88_subids[] = {
 		.card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL,
 	},{
 		.subvendor = 0x18ac,
+		.subdevice = 0xdb54,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL,
+		/* Re-branded DViCO: DigitalNow DVB-T Dual */
+	},{
+		.subvendor = 0x18ac,
 		.subdevice = 0xdb11,
 		.card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS,
 		/* Re-branded DViCO: UltraView DVB-T Plus */
@@ -1293,6 +1298,7 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
 	switch (tv.model)
 	{
 	case 28552: /* WinTV-PVR 'Roslyn' (No IR) */
+	case 34519: /* WinTV-PCI-FM */
 	case 90002: /* Nova-T-PCI (9002) */
 	case 92001: /* Nova-S-Plus (Video and IR) */
 	case 92002: /* Nova-S-Plus (Video and IR) */
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 8d6d6a6cf785..3720f24a25cf 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -787,12 +787,14 @@ static int set_pll(struct cx88_core *core, int prescale, u32 ofreq)
 
 int cx88_start_audio_dma(struct cx88_core *core)
 {
+	/* constant 128 made buzz in analog Nicam-stereo for bigger fifo_size */
+	int bpl = cx88_sram_channels[SRAM_CH25].fifo_size/4;
 	/* setup fifo + format */
-	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], 128, 0);
-	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], 128, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], bpl, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], bpl, 0);
 
-	cx_write(MO_AUDD_LNGTH,    128); /* fifo bpl size */
-	cx_write(MO_AUDR_LNGTH,    128); /* fifo bpl size */
+	cx_write(MO_AUDD_LNGTH, bpl); /* fifo bpl size */
+	cx_write(MO_AUDR_LNGTH, bpl); /* fifo bpl size */
 
 	/* start dma */
 	cx_write(MO_AUD_DMACNTRL, 0x0003); /* Up and Down fifo enable */
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index da2ad5c4b553..165d948624a3 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -482,6 +482,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	switch (core->board) {
 	case CX88_BOARD_DNTV_LIVE_DVB_T:
 	case CX88_BOARD_KWORLD_DVB_T:
+	case CX88_BOARD_KWORLD_DVB_T_CX22702:
 		ir_codes = ir_codes_dntv_live_dvb_t;
 		ir->gpio_addr = MO_GP1_IO;
 		ir->mask_keycode = 0x1f;
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index dff3893f32fd..e5ee8bceb210 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -139,6 +139,9 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
 {
 	int ret, byte;
 
+	if (dev->state & DEV_DISCONNECTED)
+		return(-ENODEV);
+
 	em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
 
 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
@@ -165,6 +168,9 @@ int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg)
 	u8 val;
 	int ret;
 
+	if (dev->state & DEV_DISCONNECTED)
+		return(-ENODEV);
+
 	em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
 
 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
@@ -195,7 +201,12 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 	int ret;
 
 	/*usb_control_msg seems to expect a kmalloced buffer */
-	unsigned char *bufs = kmalloc(len, GFP_KERNEL);
+	unsigned char *bufs;
+
+	if (dev->state & DEV_DISCONNECTED)
+		return(-ENODEV);
+
+	bufs = kmalloc(len, GFP_KERNEL);
 
 	em28xx_regdbg("req=%02x reg=%02x:", req, reg);
 
@@ -212,7 +223,7 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			      0x0000, reg, bufs, len, HZ);
-	mdelay(5);		/* FIXME: magic number */
+	msleep(5);		/* FIXME: magic number */
 	kfree(bufs);
 	return ret;
 }
@@ -253,7 +264,7 @@ int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 * val)
 	if ((ret = em28xx_read_reg(dev, AC97BUSY_REG)) < 0)
 		return ret;
 	else if (((u8) ret) & 0x01) {
-		em28xx_warn ("AC97 command still being exectuted: not handled properly!\n");
+		em28xx_warn ("AC97 command still being executed: not handled properly!\n");
 	}
 	return 0;
 }
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 0591a705b7a1..6ca8631bc36d 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -78,7 +78,7 @@ static int em2800_i2c_send_max4(struct em28xx *dev, unsigned char addr,
 		ret = dev->em28xx_read_reg(dev, 0x05);
 		if (ret == 0x80 + len - 1)
 			return len;
-		mdelay(5);
+		msleep(5);
 	}
 	em28xx_warn("i2c write timed out\n");
 	return -EIO;
@@ -138,7 +138,7 @@ static int em2800_i2c_check_for_device(struct em28xx *dev, unsigned char addr)
 			return -ENODEV;
 		else if (msg == 0x84)
 			return 0;
-		mdelay(5);
+		msleep(5);
 	}
 	return -ENODEV;
 }
@@ -278,9 +278,9 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
 							   msgs[i].buf,
 							   msgs[i].len,
 							   i == num - 1);
-			if (rc < 0)
-				goto err;
 		}
+		if (rc < 0)
+			goto err;
 		if (i2c_debug>=2)
 			printk("\n");
 	}
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index eea304f75176..94a14a2bb6d6 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -6,6 +6,9 @@
 		      Mauro Carvalho Chehab <mchehab@brturbo.com.br>
 		      Sascha Sommer <saschasommer@freenet.de>
 
+	Some parts based on SN9C10x PC Camera Controllers GPL driver made
+		by Luca Risolia <luca.risolia@studio.unibo.it>
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index c64718aec9cb..5a35d3b6550d 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -136,7 +136,7 @@ struct saa7134_board saa7134_boards[] = {
 	},
 	[SAA7134_BOARD_FLYVIDEO2000] = {
 		/* "TC Wan" <tcwan@cs.usm.my> */
-		.name           = "LifeView FlyVIDEO2000",
+		.name           = "LifeView/Typhoon FlyVIDEO2000",
 		.audio_clock    = 0x00200000,
 		.tuner_type     = TUNER_LG_PAL_NEW_TAPC,
 		.radio_type     = UNSET,
@@ -1884,44 +1884,38 @@ struct saa7134_board saa7134_boards[] = {
 			.gpio = 0x000,
 		},
 	},
-	[SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS] = {
-		.name		= "Typhoon DVB-T Duo Digital/Analog Cardbus",
+	[SAA7134_BOARD_FLYDVBT_DUO_CARDBUS] = {
+		.name		= "LifeView/Typhoon FlyDVB-T Duo Cardbus",
 		.audio_clock    = 0x00200000,
 		.tuner_type     = TUNER_PHILIPS_TDA8290,
 		.radio_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
 		.mpeg           = SAA7134_MPEG_DVB,
-		/* .gpiomask       = 0xe000, */
+		.gpiomask	= 0x00200000,
 		.inputs         = {{
 			.name = name_tv,
 			.vmux = 1,
 			.amux = TV,
-		/*	.gpio = 0x0000,      */
+			.gpio = 0x200000,	/* GPIO21=High for TV input */
 			.tv   = 1,
 		},{
+			.name = name_svideo,	/* S-Video signal on S-Video input */
+			.vmux = 8,
+			.amux = LINE2,
+		},{
 			.name = name_comp1,	/* Composite signal on S-Video input */
 			.vmux = 0,
 			.amux = LINE2,
-		/*	.gpio = 0x4000,      */
 		},{
 			.name = name_comp2,	/* Composite input */
 			.vmux = 3,
 			.amux = LINE2,
-		/*	.gpio = 0x4000,      */
-		},{
-			.name = name_svideo,	/* S-Video signal on S-Video input */
-			.vmux = 8,
-			.amux = LINE2,
-		/*	.gpio = 0x4000,      */
 		}},
 		.radio = {
 			.name = name_radio,
-			.amux = LINE2,
-		},
-		.mute = {
-			.name = name_mute,
-			.amux = LINE1,
+			.amux = TV,
+			.gpio = 0x000000,	/* GPIO21=Low for FM radio antenna */
 		},
 	},
 	[SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII] = {
@@ -2701,6 +2695,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.driver_data  = SAA7134_BOARD_FLYVIDEO2000,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7130,
+		.subvendor    = 0x4e42,		/* Typhoon */
+		.subdevice    = 0x0138,		/* LifeView FlyTV Prime30 OEM */
+		.driver_data  = SAA7134_BOARD_FLYVIDEO2000,
+	},{
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x5168,
 		.subdevice    = 0x0212, /* minipci, LR212 */
@@ -2935,7 +2935,7 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x5168,
 		.subdevice    = 0x0502,                /* Cardbus version */
-		.driver_data  = SAA7134_BOARD_FLYDVBTDUO,
+		.driver_data  = SAA7134_BOARD_FLYDVBT_DUO_CARDBUS,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
@@ -2980,12 +2980,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subdevice    = 0x1370,        /* cardbus version */
 		.driver_data  = SAA7134_BOARD_ADS_INSTANT_TV,
 
-	},{     /* Typhoon DVB-T Duo Digital/Analog Cardbus */
+	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
-		.subvendor    = 0x4e42,
-		.subdevice    = 0x0502,
-		.driver_data  = SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS,
+		.subvendor    = 0x4e42,		/* Typhoon */
+		.subdevice    = 0x0502,		/* LifeView LR502 OEM */
+		.driver_data  = SAA7134_BOARD_FLYDVBT_DUO_CARDBUS,
 	},{
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
@@ -3206,8 +3206,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x00040000, 0x00040000);
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000004);
 		break;
-	case SAA7134_BOARD_FLYDVBTDUO:
-	case SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS:
+	case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
 		/* turn the fan on */
 		saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
 		saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x06);
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 399f9952596c..1a536e865277 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -861,7 +861,7 @@ static int dvb_init(struct saa7134_dev *dev)
 		dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
 						    &dev->i2c_adap);
 		break;
-	case SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS:
+	case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
 		dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
 						    &dev->i2c_adap);
 		break;
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index e70eae8d29bb..3261d8bebdd1 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -185,7 +185,7 @@ struct saa7134_format {
 #define SAA7134_BOARD_AVERMEDIA_GO_007_FM 57
 #define SAA7134_BOARD_ADS_INSTANT_TV 58
 #define SAA7134_BOARD_KWORLD_VSTREAM_XPERT 59
-#define SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS 60
+#define SAA7134_BOARD_FLYDVBT_DUO_CARDBUS 60
 #define SAA7134_BOARD_PHILIPS_TOUGH 61
 #define SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII 62
 #define SAA7134_BOARD_KWORLD_XPERT 63
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index 54fc33011ffb..9d769264a329 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -2012,7 +2012,6 @@ static int __devinit init_saa7146(struct pci_dev *pdev)
 {
 	struct saa7146 *saa = pci_get_drvdata(pdev);
 
-	memset(saa, 0, sizeof(*saa));
 	saa->user = 0;
 	/* reset the saa7146 */
 	saawrite(0xffff0000, SAA7146_MC1);
@@ -2062,16 +2061,16 @@ static int __devinit init_saa7146(struct pci_dev *pdev)
 	}
 	if (saa->audbuf == NULL && (saa->audbuf = vmalloc(65536)) == NULL) {
 		dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
-		goto errvid;
+		goto errfree;
 	}
 	if (saa->osdbuf == NULL && (saa->osdbuf = vmalloc(131072)) == NULL) {
 		dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
-		goto erraud;
+		goto errfree;
 	}
 	/* allocate 81920 byte buffer for clipping */
 	if ((saa->dmavid2 = kzalloc(VIDEO_CLIPMAP_SIZE, GFP_KERNEL)) == NULL) {
 		dev_err(&pdev->dev, "%d: clip kmalloc failed\n", saa->nr);
-		goto errosd;
+		goto errfree;
 	}
 	/* setup clipping registers */
 	saawrite(virt_to_bus(saa->dmavid2), SAA7146_BASE_EVEN2);
@@ -2085,15 +2084,11 @@ static int __devinit init_saa7146(struct pci_dev *pdev)
 	I2CBusScan(saa);
 
 	return 0;
-errosd:
+errfree:
 	vfree(saa->osdbuf);
-	saa->osdbuf = NULL;
-erraud:
 	vfree(saa->audbuf);
-	saa->audbuf = NULL;
-errvid:
 	vfree(saa->vidbuf);
-	saa->vidbuf = NULL;
+	saa->audbuf = saa->osdbuf = saa->vidbuf = NULL;
 err:
 	return -ENOMEM;
 }
diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index 5815649bdc78..0d54f6c1982b 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -231,7 +231,7 @@ static struct tvnorm tvnorms[] = {
 			   cAudioIF_6_5   |
 			   cVideoIF_38_90 ),
 	},{
-		.std   = V4L2_STD_NTSC_M,
+		.std   = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
 		.name  = "NTSC-M",
 		.b     = ( cNegativeFmTV  |
 			   cQSS           ),
@@ -619,6 +619,11 @@ static int tda9887_fixup_std(struct tda9887 *t)
 			tda9887_dbg("insmod fixup: NTSC => NTSC_M_JP\n");
 			t->std = V4L2_STD_NTSC_M_JP;
 			break;
+		case 'k':
+		case 'K':
+			tda9887_dbg("insmod fixup: NTSC => NTSC_M_KR\n");
+			t->std = V4L2_STD_NTSC_M_KR;
+			break;
 		case '-':
 			/* default parameter, do nothing */
 			break;
@@ -876,7 +881,7 @@ static int tda9887_resume(struct device * dev)
 /* ----------------------------------------------------------------------- */
 
 static struct i2c_driver driver = {
-	.id             = -1, /* FIXME */
+	.id             = I2C_DRIVERID_TDA9887,
 	.attach_adapter = tda9887_probe,
 	.detach_client  = tda9887_detach,
 	.command        = tda9887_command,
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 2995b22acb43..e7ee619d62c5 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -216,6 +216,7 @@ static void set_type(struct i2c_client *c, unsigned int type,
 		buffer[3] = 0xa4;
 		i2c_master_send(c,buffer,4);
 		default_tuner_init(c);
+		break;
 	default:
 		default_tuner_init(c);
 		break;
@@ -365,6 +366,11 @@ static int tuner_fixup_std(struct tuner *t)
 			tuner_dbg("insmod fixup: NTSC => NTSC_M_JP\n");
 			t->std = V4L2_STD_NTSC_M_JP;
 			break;
+		case 'k':
+		case 'K':
+			tuner_dbg("insmod fixup: NTSC => NTSC_M_KR\n");
+			t->std = V4L2_STD_NTSC_M_KR;
+			break;
 		case '-':
 			/* default parameter, do nothing */
 			break;
@@ -448,7 +454,7 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)
 			printk("%02x ",buffer[i]);
 		printk("\n");
 	}
-	/* TEA5767 autodetection code - only for addr = 0xc0 */
+	/* autodetection code based on the i2c addr */
 	if (!no_autodetect) {
 		switch (addr) {
 		case 0x42:
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index 6d03b9b05c6e..c8e5ad0e8185 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -390,6 +390,14 @@ static void tda9840_setmode(struct CHIPSTATE *chip, int mode)
 		chip_write(chip, TDA9840_SW, t);
 }
 
+static int tda9840_checkit(struct CHIPSTATE *chip)
+{
+	int rc;
+	rc = chip_read(chip);
+	/* lower 5 bits should be 0 */
+	return ((rc & 0x1f) == 0) ? 1 : 0;
+}
+
 /* ---------------------------------------------------------------------- */
 /* audio chip descriptions - defines+functions for tda985x                */
 
@@ -1264,6 +1272,7 @@ static struct CHIPDESC chiplist[] = {
 		.addr_hi    = I2C_TDA9840 >> 1,
 		.registers  = 5,
 
+		.checkit    = tda9840_checkit,
 		.getmode    = tda9840_getmode,
 		.setmode    = tda9840_setmode,
 		.checkmode  = generic_checkmode,
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index fad9ea0ae4f2..1864423b3046 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -746,24 +746,27 @@ static int tvp5150_set_std(struct i2c_client *c, v4l2_std_id std)
 
 static inline void tvp5150_reset(struct i2c_client *c)
 {
-	u8 type, ver_656, msb_id, lsb_id, msb_rom, lsb_rom;
+	u8 msb_id, lsb_id, msb_rom, lsb_rom;
 	struct tvp5150 *decoder = i2c_get_clientdata(c);
 
-	type=tvp5150_read(c,TVP5150_AUTOSW_MSK);
 	msb_id=tvp5150_read(c,TVP5150_MSB_DEV_ID);
 	lsb_id=tvp5150_read(c,TVP5150_LSB_DEV_ID);
 	msb_rom=tvp5150_read(c,TVP5150_ROM_MAJOR_VER);
 	lsb_rom=tvp5150_read(c,TVP5150_ROM_MINOR_VER);
 
-	if (type==0xdc) {
-		ver_656=tvp5150_read(c,TVP5150_REV_SELECT);
-		tvp5150_info("tvp%02x%02xam1 detected 656 version is %d.\n",msb_id, lsb_id,ver_656);
-	} else if (type==0xfc) {
-		tvp5150_info("tvp%02x%02xa detected.\n",msb_id, lsb_id);
+	if ((msb_rom==4)&&(lsb_rom==0)) { /* Is TVP5150AM1 */
+		tvp5150_info("tvp%02x%02xam1 detected.\n",msb_id, lsb_id);
+
+		/* ITU-T BT.656.4 timing */
+		tvp5150_write(c,TVP5150_REV_SELECT,0);
 	} else {
-		tvp5150_info("unknown tvp%02x%02x chip detected(%d).\n",msb_id,lsb_id,type);
+		if ((msb_rom==3)||(lsb_rom==0x21)) { /* Is TVP5150A */
+			tvp5150_info("tvp%02x%02xa detected.\n",msb_id, lsb_id);
+		} else {
+			tvp5150_info("*** unknown tvp%02x%02x chip detected.\n",msb_id,lsb_id);
+			tvp5150_info("*** Rom ver is %d.%d\n",msb_rom,lsb_rom);
+		}
 	}
-	tvp5150_info("Rom ver is %d.%d\n",msb_rom,lsb_rom);
 
 	/* Initializes TVP5150 to its default values */
 	tvp5150_write_inittab(c, tvp5150_init_default);
@@ -893,6 +896,17 @@ static int tvp5150_command(struct i2c_client *c,
 		}
 	case DECODER_GET_STATUS:
 		{
+			int *iarg = arg;
+			int status;
+			int res=0;
+			status = tvp5150_read(c, 0x88);
+			if(status&0x08){
+				res |= DECODER_STATUS_COLOR;
+			}
+			if(status&0x04 && status&0x02){
+				res |= DECODER_STATUS_GOOD;
+			}
+			*iarg=res;
 			break;
 		}
 
diff --git a/drivers/message/i2o/core.h b/drivers/message/i2o/core.h
index 90628562851e..184974cc734d 100644
--- a/drivers/message/i2o/core.h
+++ b/drivers/message/i2o/core.h
@@ -60,4 +60,7 @@ extern void i2o_iop_remove(struct i2o_controller *);
 #define I2O_IN_PORT	0x40
 #define I2O_OUT_PORT	0x44
 
+/* Motorola/Freescale specific register offset */
+#define I2O_MOTOROLA_PORT_OFFSET	0x10400
+
 #define I2O_IRQ_OUTBOUND_POST	0x00000008
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index f9e5a23697a1..c08ddac3717d 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -732,7 +732,7 @@ static int i2o_scsi_abort(struct scsi_cmnd *SCpnt)
 	    cpu_to_le32(I2O_CMD_SCSI_ABORT << 24 | HOST_TID << 12 | tid);
 	msg->body[0] = cpu_to_le32(i2o_cntxt_list_get_ptr(c, SCpnt));
 
-	if (i2o_msg_post_wait(c, msg, I2O_TIMEOUT_SCSI_SCB_ABORT))
+	if (!i2o_msg_post_wait(c, msg, I2O_TIMEOUT_SCSI_SCB_ABORT))
 		status = SUCCESS;
 
 	return status;
diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c
index d698d7709c31..4f1515cae5dc 100644
--- a/drivers/message/i2o/pci.c
+++ b/drivers/message/i2o/pci.c
@@ -88,6 +88,11 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c)
 	struct device *dev = &pdev->dev;
 	int i;
 
+	if (pci_request_regions(pdev, OSM_DESCRIPTION)) {
+		printk(KERN_ERR "%s: device already claimed\n", c->name);
+		return -ENODEV;
+	}
+
 	for (i = 0; i < 6; i++) {
 		/* Skip I/O spaces */
 		if (!(pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
@@ -163,6 +168,24 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c)
 	c->in_port = c->base.virt + I2O_IN_PORT;
 	c->out_port = c->base.virt + I2O_OUT_PORT;
 
+	/* Motorola/Freescale chip does not follow spec */
+	if (pdev->vendor == PCI_VENDOR_ID_MOTOROLA && pdev->device == 0x18c0) {
+		/* Check if CPU is enabled */
+		if (be32_to_cpu(readl(c->base.virt + 0x10000)) & 0x10000000) {
+			printk(KERN_INFO "%s: MPC82XX needs CPU running to "
+			       "service I2O.\n", c->name);
+			i2o_pci_free(c);
+			return -ENODEV;
+		} else {
+			c->irq_status += I2O_MOTOROLA_PORT_OFFSET;
+			c->irq_mask += I2O_MOTOROLA_PORT_OFFSET;
+			c->in_port += I2O_MOTOROLA_PORT_OFFSET;
+			c->out_port += I2O_MOTOROLA_PORT_OFFSET;
+			printk(KERN_INFO "%s: MPC82XX workarounds activated.\n",
+			       c->name);
+		}
+	}
+
 	if (i2o_dma_alloc(dev, &c->status, 8, GFP_KERNEL)) {
 		i2o_pci_free(c);
 		return -ENOMEM;
@@ -298,7 +321,7 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
 	struct i2o_controller *c;
 	int rc;
 	struct pci_dev *i960 = NULL;
-	int pci_dev_busy = 0;
+	int enabled = pdev->is_enabled;
 
 	printk(KERN_INFO "i2o: Checking for PCI I2O controllers...\n");
 
@@ -308,16 +331,12 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
 		return -ENODEV;
 	}
 
-	if ((rc = pci_enable_device(pdev))) {
-		printk(KERN_WARNING "i2o: couldn't enable device %s\n",
-		       pci_name(pdev));
-		return rc;
-	}
-
-	if (pci_request_regions(pdev, OSM_DESCRIPTION)) {
-		printk(KERN_ERR "i2o: device already claimed\n");
-		return -ENODEV;
-	}
+	if (!enabled)
+		if ((rc = pci_enable_device(pdev))) {
+			printk(KERN_WARNING "i2o: couldn't enable device %s\n",
+			       pci_name(pdev));
+			return rc;
+		}
 
 	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
 		printk(KERN_WARNING "i2o: no suitable DMA found for %s\n",
@@ -395,9 +414,7 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
 
 	if ((rc = i2o_pci_alloc(c))) {
 		printk(KERN_ERR "%s: DMA / IO allocation for I2O controller "
-		       " failed\n", c->name);
-		if (rc == -ENODEV)
-			pci_dev_busy = 1;
+		       "failed\n", c->name);
 		goto free_controller;
 	}
 
@@ -425,7 +442,7 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
 	i2o_iop_free(c);
 
       disable:
-	if (!pci_dev_busy)
+	if (!enabled)
 		pci_disable_device(pdev);
 
 	return rc;
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index c483a863b116..5d397b7a5497 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -65,7 +65,7 @@ config MMC_AU1X
 	depends on SOC_AU1X00 && MMC
 	help
 	  This selects the AMD Alchemy(R) Multimedia card interface.
-	  iIf you have a Alchemy platform with a MMC slot, say Y or M here.
+	  If you have a Alchemy platform with a MMC slot, say Y or M here.
 
 	  If unsure, say N.
 
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index aaf04638054e..227c39a7c1b4 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -194,7 +194,7 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
 
 	u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
 
-	switch(cmd->flags) {
+	switch (mmc_rsp_type(cmd->flags)) {
 	case MMC_RSP_R1:
 		mmccmd |= SD_CMD_RT_1;
 		break;
@@ -483,34 +483,35 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
 	cmd = mrq->cmd;
 	cmd->error = MMC_ERR_NONE;
 
-	if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_SHORT) {
-
-		/* Techincally, we should be getting all 48 bits of the response
-		 * (SD_RESP1 + SD_RESP2), but because our response omits the CRC,
-		 * our data ends up being shifted 8 bits to the right.  In this case,
-		 * that means that the OSR data starts at bit 31, so we can just
-		 * read RESP0 and return that
-		 */
-
-		cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
-	}
-	else if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_LONG) {
-		u32 r[4];
-		int i;
-
-		r[0] = au_readl(host->iobase + SD_RESP3);
-		r[1] = au_readl(host->iobase + SD_RESP2);
-		r[2] = au_readl(host->iobase + SD_RESP1);
-		r[3] = au_readl(host->iobase + SD_RESP0);
-
-		/* The CRC is omitted from the response, so really we only got
-		 * 120 bytes, but the engine expects 128 bits, so we have to shift
-		 * things up
-		 */
-
-		for(i = 0; i < 4; i++) {
-			cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
-			if (i != 3) cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			u32 r[4];
+			int i;
+
+			r[0] = au_readl(host->iobase + SD_RESP3);
+			r[1] = au_readl(host->iobase + SD_RESP2);
+			r[2] = au_readl(host->iobase + SD_RESP1);
+			r[3] = au_readl(host->iobase + SD_RESP0);
+
+			/* The CRC is omitted from the response, so really
+			 * we only got 120 bytes, but the engine expects
+			 * 128 bits, so we have to shift things up
+			 */
+
+			for(i = 0; i < 4; i++) {
+				cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
+				if (i != 3)
+					cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
+			}
+		} else {
+			/* Techincally, we should be getting all 48 bits of
+			 * the response (SD_RESP1 + SD_RESP2), but because
+			 * our response omits the CRC, our data ends up
+			 * being shifted 8 bits to the right.  In this case,
+			 * that means that the OSR data starts at bit 31,
+			 * so we can just read RESP0 and return that
+			 */
+			cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
 		}
 	}
 
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index bfca5c176e88..1888060c5e0c 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -211,7 +211,7 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, unsigned int rca,
 
 		appcmd.opcode = MMC_APP_CMD;
 		appcmd.arg = rca << 16;
-		appcmd.flags = MMC_RSP_R1;
+		appcmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
 		appcmd.retries = 0;
 		memset(appcmd.resp, 0, sizeof(appcmd.resp));
 		appcmd.data = NULL;
@@ -331,7 +331,7 @@ static int mmc_select_card(struct mmc_host *host, struct mmc_card *card)
 
 	cmd.opcode = MMC_SELECT_CARD;
 	cmd.arg = card->rca << 16;
-	cmd.flags = MMC_RSP_R1;
+	cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
 
 	err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
 	if (err != MMC_ERR_NONE)
@@ -358,7 +358,7 @@ static int mmc_select_card(struct mmc_host *host, struct mmc_card *card)
 			struct mmc_command cmd;
 			cmd.opcode = SD_APP_SET_BUS_WIDTH;
 			cmd.arg = SD_BUS_WIDTH_4;
-			cmd.flags = MMC_RSP_R1;
+			cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
 
 			err = mmc_wait_for_app_cmd(host, card->rca, &cmd,
 				CMD_RETRIES);
@@ -386,7 +386,7 @@ static void mmc_deselect_cards(struct mmc_host *host)
 
 		cmd.opcode = MMC_SELECT_CARD;
 		cmd.arg = 0;
-		cmd.flags = MMC_RSP_NONE;
+		cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
 
 		mmc_wait_for_cmd(host, &cmd, 0);
 	}
@@ -677,7 +677,7 @@ static void mmc_idle_cards(struct mmc_host *host)
 
 	cmd.opcode = MMC_GO_IDLE_STATE;
 	cmd.arg = 0;
-	cmd.flags = MMC_RSP_NONE;
+	cmd.flags = MMC_RSP_NONE | MMC_CMD_BC;
 
 	mmc_wait_for_cmd(host, &cmd, 0);
 
@@ -738,7 +738,7 @@ static int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 
 	cmd.opcode = MMC_SEND_OP_COND;
 	cmd.arg = ocr;
-	cmd.flags = MMC_RSP_R3;
+	cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
 
 	for (i = 100; i; i--) {
 		err = mmc_wait_for_cmd(host, &cmd, 0);
@@ -766,7 +766,7 @@ static int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 
 	cmd.opcode = SD_APP_OP_COND;
 	cmd.arg = ocr;
-	cmd.flags = MMC_RSP_R3;
+	cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
 
 	for (i = 100; i; i--) {
 		err = mmc_wait_for_app_cmd(host, 0, &cmd, CMD_RETRIES);
@@ -805,7 +805,7 @@ static void mmc_discover_cards(struct mmc_host *host)
 
 		cmd.opcode = MMC_ALL_SEND_CID;
 		cmd.arg = 0;
-		cmd.flags = MMC_RSP_R2;
+		cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
 
 		err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
 		if (err == MMC_ERR_TIMEOUT) {
@@ -835,7 +835,7 @@ static void mmc_discover_cards(struct mmc_host *host)
 
 			cmd.opcode = SD_SEND_RELATIVE_ADDR;
 			cmd.arg = 0;
-			cmd.flags = MMC_RSP_R6;
+			cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR;
 
 			err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
 			if (err != MMC_ERR_NONE)
@@ -856,7 +856,7 @@ static void mmc_discover_cards(struct mmc_host *host)
 		} else {
 			cmd.opcode = MMC_SET_RELATIVE_ADDR;
 			cmd.arg = card->rca << 16;
-			cmd.flags = MMC_RSP_R1;
+			cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
 
 			err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
 			if (err != MMC_ERR_NONE)
@@ -878,7 +878,7 @@ static void mmc_read_csds(struct mmc_host *host)
 
 		cmd.opcode = MMC_SEND_CSD;
 		cmd.arg = card->rca << 16;
-		cmd.flags = MMC_RSP_R2;
+		cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;
 
 		err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
 		if (err != MMC_ERR_NONE) {
@@ -920,7 +920,7 @@ static void mmc_read_scrs(struct mmc_host *host)
 
 		cmd.opcode = MMC_APP_CMD;
 		cmd.arg = card->rca << 16;
-		cmd.flags = MMC_RSP_R1;
+		cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
 
 		err = mmc_wait_for_cmd(host, &cmd, 0);
 		if ((err != MMC_ERR_NONE) || !(cmd.resp[0] & R1_APP_CMD)) {
@@ -932,7 +932,7 @@ static void mmc_read_scrs(struct mmc_host *host)
 
 		cmd.opcode = SD_APP_SEND_SCR;
 		cmd.arg = 0;
-		cmd.flags = MMC_RSP_R1;
+		cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
 
 		memset(&data, 0, sizeof(struct mmc_data));
 
@@ -1003,7 +1003,7 @@ static void mmc_check_cards(struct mmc_host *host)
 
 		cmd.opcode = MMC_SEND_STATUS;
 		cmd.arg = card->rca << 16;
-		cmd.flags = MMC_RSP_R1;
+		cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
 
 		err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES);
 		if (err == MMC_ERR_NONE)
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index 5b014c370e80..8eb2a2ede64b 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -171,14 +171,14 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		brq.mrq.data = &brq.data;
 
 		brq.cmd.arg = req->sector << 9;
-		brq.cmd.flags = MMC_RSP_R1;
+		brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
 		brq.data.timeout_ns = card->csd.tacc_ns * 10;
 		brq.data.timeout_clks = card->csd.tacc_clks * 10;
 		brq.data.blksz_bits = md->block_bits;
 		brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
 		brq.stop.opcode = MMC_STOP_TRANSMISSION;
 		brq.stop.arg = 0;
-		brq.stop.flags = MMC_RSP_R1B;
+		brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
 
 		if (rq_data_dir(req) == READ) {
 			brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
@@ -223,7 +223,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 
 			cmd.opcode = MMC_SEND_STATUS;
 			cmd.arg = card->rca << 16;
-			cmd.flags = MMC_RSP_R1;
+			cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
 			err = mmc_wait_for_cmd(card->host, &cmd, 5);
 			if (err) {
 				printk(KERN_ERR "%s: error %d requesting status\n",
@@ -430,7 +430,7 @@ mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card)
 	mmc_card_claim_host(card);
 	cmd.opcode = MMC_SET_BLOCKLEN;
 	cmd.arg = 1 << md->block_bits;
-	cmd.flags = MMC_RSP_R1;
+	cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
 	err = mmc_wait_for_cmd(card->host, &cmd, 5);
 	mmc_card_release_host(card);
 
diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
index 634ef53e85a5..37ee7f8dc82f 100644
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -124,15 +124,10 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
 	}
 
 	c |= cmd->opcode | MCI_CPSM_ENABLE;
-	switch (cmd->flags & MMC_RSP_MASK) {
-	case MMC_RSP_NONE:
-	default:
-		break;
-	case MMC_RSP_LONG:
-		c |= MCI_CPSM_LONGRSP;
-	case MMC_RSP_SHORT:
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136)
+			c |= MCI_CPSM_LONGRSP;
 		c |= MCI_CPSM_RESPONSE;
-		break;
 	}
 	if (/*interrupt*/0)
 		c |= MCI_CPSM_INTERRUPT;
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index ee8f8a0420d1..285d7d068097 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -178,14 +178,15 @@ static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd,
 	if (cmd->flags & MMC_RSP_BUSY)
 		cmdat |= CMDAT_BUSY;
 
-	switch (cmd->flags & (MMC_RSP_MASK | MMC_RSP_CRC)) {
-	case MMC_RSP_SHORT | MMC_RSP_CRC:
+#define RSP_TYPE(x)	((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
+	switch (RSP_TYPE(mmc_resp_type(cmd))) {
+	case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6 */
 		cmdat |= CMDAT_RESP_SHORT;
 		break;
-	case MMC_RSP_SHORT:
+	case RSP_TYPE(MMC_RSP_R3):
 		cmdat |= CMDAT_RESP_R3;
 		break;
-	case MMC_RSP_LONG | MMC_RSP_CRC:
+	case RSP_TYPE(MMC_RSP_R2):
 		cmdat |= CMDAT_RESP_R2;
 		break;
 	default:
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index f25757625361..3be397d436fa 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -459,7 +459,7 @@ static void wbsd_send_command(struct wbsd_host *host, struct mmc_command *cmd)
 	/*
 	 * Do we expect a reply?
 	 */
-	if ((cmd->flags & MMC_RSP_MASK) != MMC_RSP_NONE) {
+	if (cmd->flags & MMC_RSP_PRESENT) {
 		/*
 		 * Read back status.
 		 */
@@ -476,10 +476,10 @@ static void wbsd_send_command(struct wbsd_host *host, struct mmc_command *cmd)
 			cmd->error = MMC_ERR_BADCRC;
 		/* All ok */
 		else {
-			if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_SHORT)
-				wbsd_get_short_reply(host, cmd);
-			else
+			if (cmd->flags & MMC_RSP_136)
 				wbsd_get_long_reply(host, cmd);
+			else
+				wbsd_get_short_reply(host, cmd);
 		}
 	}
 
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index effa0d7a73ac..205bb7083335 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -301,7 +301,7 @@ config MTD_JEDEC
 
 config MTD_XIP
 	bool "XIP aware MTD support"
-	depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && EXPERIMENTAL && ARM
+	depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && EXPERIMENTAL && ARCH_MTD_XIP
 	default y if XIP_KERNEL
 	help
 	  This allows MTD support to work with flash memory which is also
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
index 701620b6baed..8b3784e2de89 100644
--- a/drivers/mtd/maps/dc21285.c
+++ b/drivers/mtd/maps/dc21285.c
@@ -110,8 +110,9 @@ static void dc21285_copy_to_32(struct map_info *map, unsigned long to, const voi
 {
 	while (len > 0) {
 		map_word d;
-		d.x[0] = *((uint32_t*)from)++;
+		d.x[0] = *((uint32_t*)from);
 		dc21285_write32(map, d, to);
+		from += 4;
 		to += 4;
 		len -= 4;
 	}
@@ -121,8 +122,9 @@ static void dc21285_copy_to_16(struct map_info *map, unsigned long to, const voi
 {
 	while (len > 0) {
 		map_word d;
-		d.x[0] = *((uint16_t*)from)++;
+		d.x[0] = *((uint16_t*)from);
 		dc21285_write16(map, d, to);
+		from += 2;
 		to += 2;
 		len -= 2;
 	}
@@ -131,8 +133,9 @@ static void dc21285_copy_to_16(struct map_info *map, unsigned long to, const voi
 static void dc21285_copy_to_8(struct map_info *map, unsigned long to, const void *from, ssize_t len)
 {
 	map_word d;
-	d.x[0] = *((uint8_t*)from)++;
+	d.x[0] = *((uint8_t*)from);
 	dc21285_write8(map, d, to);
+	from++;
 	to++;
 	len--;
 }
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 7488ee7f7caf..7f47124f118d 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -753,9 +753,11 @@ enum tx_desc_status {
 enum ChipCaps { CapBusMaster=0x20, CapPwrMgmt=0x2000 };
 
 struct vortex_extra_stats {
-        unsigned long tx_deferred;
-        unsigned long tx_multiple_collisions;
-        unsigned long rx_bad_ssd;
+	unsigned long tx_deferred;
+	unsigned long tx_max_collisions;
+	unsigned long tx_multiple_collisions;
+	unsigned long tx_single_collisions;
+	unsigned long rx_bad_ssd;
 };
 
 struct vortex_private {
@@ -863,12 +865,14 @@ static struct {
 	const char str[ETH_GSTRING_LEN];
 } ethtool_stats_keys[] = {
 	{ "tx_deferred" },
+	{ "tx_max_collisions" },
 	{ "tx_multiple_collisions" },
+	{ "tx_single_collisions" },
 	{ "rx_bad_ssd" },
 };
 
 /* number of ETHTOOL_GSTATS u64's */
-#define VORTEX_NUM_STATS     3
+#define VORTEX_NUM_STATS    5
 
 static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
 				   int chip_idx, int card_idx);
@@ -2108,9 +2112,12 @@ vortex_error(struct net_device *dev, int status)
 		iowrite8(0, ioaddr + TxStatus);
 		if (tx_status & 0x30) {			/* txJabber or txUnderrun */
 			do_tx_reset = 1;
-		} else if ((tx_status & 0x08) && (vp->drv_flags & MAX_COLLISION_RESET)) {	/* maxCollisions */
-			do_tx_reset = 1;
-			reset_mask = 0x0108;		/* Reset interface logic, but not download logic */
+		} else if (tx_status & 0x08) {	/* maxCollisions */
+			vp->xstats.tx_max_collisions++;
+			if (vp->drv_flags & MAX_COLLISION_RESET) {
+				do_tx_reset = 1;
+				reset_mask = 0x0108;		/* Reset interface logic, but not download logic */
+			}
 		} else {						/* Merely re-enable the transmitter. */
 			iowrite16(TxEnable, ioaddr + EL3_CMD);
 		}
@@ -2926,7 +2933,6 @@ static void update_stats(void __iomem *ioaddr, struct net_device *dev)
 	EL3WINDOW(6);
 	vp->stats.tx_carrier_errors		+= ioread8(ioaddr + 0);
 	vp->stats.tx_heartbeat_errors		+= ioread8(ioaddr + 1);
-	vp->stats.collisions			+= ioread8(ioaddr + 3);
 	vp->stats.tx_window_errors		+= ioread8(ioaddr + 4);
 	vp->stats.rx_fifo_errors		+= ioread8(ioaddr + 5);
 	vp->stats.tx_packets			+= ioread8(ioaddr + 6);
@@ -2939,10 +2945,15 @@ static void update_stats(void __iomem *ioaddr, struct net_device *dev)
 	vp->stats.tx_bytes 			+= ioread16(ioaddr + 12);
 	/* Extra stats for get_ethtool_stats() */
 	vp->xstats.tx_multiple_collisions	+= ioread8(ioaddr + 2);
+	vp->xstats.tx_single_collisions         += ioread8(ioaddr + 3);
 	vp->xstats.tx_deferred			+= ioread8(ioaddr + 8);
 	EL3WINDOW(4);
 	vp->xstats.rx_bad_ssd			+= ioread8(ioaddr + 12);
 
+	vp->stats.collisions = vp->xstats.tx_multiple_collisions
+		+ vp->xstats.tx_single_collisions
+		+ vp->xstats.tx_max_collisions;
+
 	{
 		u8 up = ioread8(ioaddr + 13);
 		vp->stats.rx_bytes += (up & 0x0f) << 16;
@@ -3036,8 +3047,10 @@ static void vortex_get_ethtool_stats(struct net_device *dev,
 	spin_unlock_irqrestore(&vp->lock, flags);
 
 	data[0] = vp->xstats.tx_deferred;
-	data[1] = vp->xstats.tx_multiple_collisions;
-	data[2] = vp->xstats.rx_bad_ssd;
+	data[1] = vp->xstats.tx_max_collisions;
+	data[2] = vp->xstats.tx_multiple_collisions;
+	data[3] = vp->xstats.tx_single_collisions;
+	data[4] = vp->xstats.rx_bad_ssd;
 }
 
 
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index adfba44dac5a..2beac55b57d6 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -586,6 +586,7 @@ struct rtl8139_private {
 	dma_addr_t tx_bufs_dma;
 	signed char phys[4];		/* MII device addresses. */
 	char twistie, twist_row, twist_col;	/* Twister tune state. */
+	unsigned int watchdog_fired : 1;
 	unsigned int default_port : 4;	/* Last dev->if_port value. */
 	unsigned int have_thread : 1;
 	spinlock_t lock;
@@ -638,6 +639,7 @@ static void rtl8139_set_rx_mode (struct net_device *dev);
 static void __set_rx_mode (struct net_device *dev);
 static void rtl8139_hw_start (struct net_device *dev);
 static void rtl8139_thread (void *_data);
+static void rtl8139_tx_timeout_task(void *_data);
 static struct ethtool_ops rtl8139_ethtool_ops;
 
 /* write MMIO register, with flush */
@@ -1598,13 +1600,14 @@ static void rtl8139_thread (void *_data)
 {
 	struct net_device *dev = _data;
 	struct rtl8139_private *tp = netdev_priv(dev);
-	unsigned long thr_delay;
+	unsigned long thr_delay = next_tick;
 
-	if (rtnl_shlock_nowait() == 0) {
+	if (tp->watchdog_fired) {
+		tp->watchdog_fired = 0;
+		rtl8139_tx_timeout_task(_data);
+	} else if (rtnl_shlock_nowait() == 0) {
 		rtl8139_thread_iter (dev, tp, tp->mmio_addr);
 		rtnl_unlock ();
-
-		thr_delay = next_tick;
 	} else {
 		/* unlikely race.  mitigate with fast poll. */
 		thr_delay = HZ / 2;
@@ -1631,7 +1634,8 @@ static void rtl8139_stop_thread(struct rtl8139_private *tp)
 	if (tp->have_thread) {
 		cancel_rearming_delayed_work(&tp->thread);
 		tp->have_thread = 0;
-	}
+	} else
+		flush_scheduled_work();
 }
 
 static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
@@ -1642,14 +1646,13 @@ static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
 	/* XXX account for unsent Tx packets in tp->stats.tx_dropped */
 }
 
-
-static void rtl8139_tx_timeout (struct net_device *dev)
+static void rtl8139_tx_timeout_task (void *_data)
 {
+	struct net_device *dev = _data;
 	struct rtl8139_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->mmio_addr;
 	int i;
 	u8 tmp8;
-	unsigned long flags;
 
 	printk (KERN_DEBUG "%s: Transmit timeout, status %2.2x %4.4x %4.4x "
 		"media %2.2x.\n", dev->name, RTL_R8 (ChipCmd),
@@ -1670,23 +1673,34 @@ static void rtl8139_tx_timeout (struct net_device *dev)
 	if (tmp8 & CmdTxEnb)
 		RTL_W8 (ChipCmd, CmdRxEnb);
 
-	spin_lock(&tp->rx_lock);
+	spin_lock_bh(&tp->rx_lock);
 	/* Disable interrupts by clearing the interrupt mask. */
 	RTL_W16 (IntrMask, 0x0000);
 
 	/* Stop a shared interrupt from scavenging while we are. */
-	spin_lock_irqsave (&tp->lock, flags);
+	spin_lock_irq(&tp->lock);
 	rtl8139_tx_clear (tp);
-	spin_unlock_irqrestore (&tp->lock, flags);
+	spin_unlock_irq(&tp->lock);
 
 	/* ...and finally, reset everything */
 	if (netif_running(dev)) {
 		rtl8139_hw_start (dev);
 		netif_wake_queue (dev);
 	}
-	spin_unlock(&tp->rx_lock);
+	spin_unlock_bh(&tp->rx_lock);
 }
 
+static void rtl8139_tx_timeout (struct net_device *dev)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+
+	if (!tp->have_thread) {
+		INIT_WORK(&tp->thread, rtl8139_tx_timeout_task, dev);
+		schedule_delayed_work(&tp->thread, next_tick);
+	} else
+		tp->watchdog_fired = 1;
+
+}
 
 static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
 {
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6a6a08441804..47c72a63dfe1 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -4,9 +4,9 @@
 #
 
 menu "Network device support"
+	depends on NET
 
 config NETDEVICES
-	depends on NET
 	default y if UML
 	bool "Network device support"
 	---help---
@@ -24,9 +24,6 @@ config NETDEVICES
 
 	  If unsure, say Y.
 
-# All the following symbols are dependent on NETDEVICES - do not repeat
-# that for each of the symbols.
-if NETDEVICES
 
 config IFB
 	tristate "Intermediate Functional Block support"
@@ -2718,8 +2715,6 @@ config NETCONSOLE
 	If you want to log kernel messages over the network, enable this.
 	See <file:Documentation/networking/netconsole.txt> for details.
 
-endif #NETDEVICES
-
 config NETPOLL
 	def_bool NETCONSOLE
 
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 4ff006c37626..e0f51afec778 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1145,7 +1145,8 @@ int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev)
 }
 
 #define BOND_INTERSECT_FEATURES \
-	(NETIF_F_SG|NETIF_F_IP_CSUM|NETIF_F_NO_CSUM|NETIF_F_HW_CSUM)
+	(NETIF_F_SG|NETIF_F_IP_CSUM|NETIF_F_NO_CSUM|NETIF_F_HW_CSUM|\
+	NETIF_F_TSO|NETIF_F_UFO)
 
 /* 
  * Compute the common dev->feature set available to all slaves.  Some
@@ -1168,6 +1169,16 @@ static int bond_compute_features(struct bonding *bond)
 			  NETIF_F_HW_CSUM)))
 		features &= ~NETIF_F_SG;
 
+	/* 
+	 * features will include NETIF_F_TSO (NETIF_F_UFO) iff all 
+	 * slave devices support NETIF_F_TSO (NETIF_F_UFO), which 
+	 * implies that all slaves also support scatter-gather 
+	 * (NETIF_F_SG), which implies that features also includes 
+	 * NETIF_F_SG. So no need to check whether we have an  
+	 * illegal combination of NETIF_F_{TSO,UFO} and 
+	 * !NETIF_F_SG 
+	 */
+
 	features |= (bond_dev->features & ~BOND_INTERSECT_FEATURES);
 	bond_dev->features = features;
 
@@ -4080,6 +4091,8 @@ static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
 
 static struct ethtool_ops bond_ethtool_ops = {
 	.get_tx_csum		= ethtool_op_get_tx_csum,
+	.get_tso		= ethtool_op_get_tso,
+	.get_ufo		= ethtool_op_get_ufo,
 	.get_sg			= ethtool_op_get_sg,
 	.get_drvinfo		= bond_ethtool_get_drvinfo,
 };
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 32d13da43a0b..041bcc583557 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -260,7 +260,7 @@ static ssize_t bonding_store_slaves(struct class_device *cd, const char *buffer,
 	char *ifname;
 	int i, res, found, ret = count;
 	struct slave *slave;
-	struct net_device *dev = 0;
+	struct net_device *dev = NULL;
 	struct bonding *bond = to_bond(cd);
 
 	/* Quick sanity check -- is the bond interface up? */
@@ -995,7 +995,7 @@ static ssize_t bonding_store_primary(struct class_device *cd, const char *buf, s
 			printk(KERN_INFO DRV_NAME
 			       ": %s: Setting primary slave to None.\n",
 			       bond->dev->name);
-			bond->primary_slave = 0;
+			bond->primary_slave = NULL;
 				bond_select_active_slave(bond);
 		} else {
 			printk(KERN_INFO DRV_NAME
@@ -1123,7 +1123,7 @@ static ssize_t bonding_store_active_slave(struct class_device *cd, const char *b
 			printk(KERN_INFO DRV_NAME
 			       ": %s: Setting active slave to None.\n",
 			       bond->dev->name);
-			bond->primary_slave = 0;
+			bond->primary_slave = NULL;
 				bond_select_active_slave(bond);
 		} else {
 			printk(KERN_INFO DRV_NAME
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index bf1fd2b98bf8..24253c807e55 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -2752,8 +2752,6 @@ static int e100_resume(struct pci_dev *pdev)
 	retval = pci_enable_wake(pdev, 0, 0);
 	if (retval)
 		DPRINTK(PROBE,ERR, "Error clearing wake events\n");
-	if(e100_hw_init(nic))
-		DPRINTK(HW, ERR, "e100_hw_init failed\n");
 
 	netif_device_attach(netdev);
 	if(netif_running(netdev))
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 0c18dbd67d3b..0e8e3fcde9ff 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -199,8 +199,7 @@ static int gfar_probe(struct platform_device *pdev)
 
 	/* get a pointer to the register memory */
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->regs = (struct gfar *)
-		ioremap(r->start, sizeof (struct gfar));
+	priv->regs = ioremap(r->start, sizeof (struct gfar));
 
 	if (NULL == priv->regs) {
 		err = -ENOMEM;
@@ -369,7 +368,7 @@ static int gfar_probe(struct platform_device *pdev)
 	return 0;
 
 register_fail:
-	iounmap((void *) priv->regs);
+	iounmap(priv->regs);
 regs_fail:
 	free_netdev(dev);
 	return err;
@@ -382,7 +381,7 @@ static int gfar_remove(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, NULL);
 
-	iounmap((void *) priv->regs);
+	iounmap(priv->regs);
 	free_netdev(dev);
 
 	return 0;
@@ -454,8 +453,7 @@ static void init_registers(struct net_device *dev)
 
 	/* Zero out the rmon mib registers if it has them */
 	if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
-		memset((void *) &(priv->regs->rmon), 0,
-		       sizeof (struct rmon_mib));
+		memset_io(&(priv->regs->rmon), 0, sizeof (struct rmon_mib));
 
 		/* Mask off the CAM interrupts */
 		gfar_write(&priv->regs->rmon.cam1, 0xffffffff);
@@ -477,7 +475,7 @@ static void init_registers(struct net_device *dev)
 void gfar_halt(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar *regs = priv->regs;
+	struct gfar __iomem *regs = priv->regs;
 	u32 tempval;
 
 	/* Mask all interrupts */
@@ -507,7 +505,7 @@ void gfar_halt(struct net_device *dev)
 void stop_gfar(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar *regs = priv->regs;
+	struct gfar __iomem *regs = priv->regs;
 	unsigned long flags;
 
 	phy_stop(priv->phydev);
@@ -590,7 +588,7 @@ static void free_skb_resources(struct gfar_private *priv)
 void gfar_start(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar *regs = priv->regs;
+	struct gfar __iomem *regs = priv->regs;
 	u32 tempval;
 
 	/* Enable Rx and Tx in MACCFG1 */
@@ -624,7 +622,7 @@ int startup_gfar(struct net_device *dev)
 	unsigned long vaddr;
 	int i;
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar *regs = priv->regs;
+	struct gfar __iomem *regs = priv->regs;
 	int err = 0;
 	u32 rctrl = 0;
 	u32 attrs = 0;
@@ -1622,7 +1620,7 @@ static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 static void adjust_link(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar *regs = priv->regs;
+	struct gfar __iomem *regs = priv->regs;
 	unsigned long flags;
 	struct phy_device *phydev = priv->phydev;
 	int new_state = 0;
@@ -1703,7 +1701,7 @@ static void gfar_set_multi(struct net_device *dev)
 {
 	struct dev_mc_list *mc_ptr;
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar *regs = priv->regs;
+	struct gfar __iomem *regs = priv->regs;
 	u32 tempval;
 
 	if(dev->flags & IFF_PROMISC) {
@@ -1842,7 +1840,7 @@ static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr)
 	int idx;
 	char tmpbuf[MAC_ADDR_LEN];
 	u32 tempval;
-	u32 *macptr = &priv->regs->macstnaddr1;
+	u32 __iomem *macptr = &priv->regs->macstnaddr1;
 
 	macptr += num*2;
 
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index cb9d66ac3ab9..d37d5401be6e 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -682,8 +682,8 @@ struct gfar_private {
 	struct rxbd8 *cur_rx;           /* Next free rx ring entry */
 	struct txbd8 *cur_tx;	        /* Next free ring entry */
 	struct txbd8 *dirty_tx;		/* The Ring entry to be freed. */
-	struct gfar *regs;	/* Pointer to the GFAR memory mapped Registers */
-	u32 *hash_regs[16];
+	struct gfar __iomem *regs;	/* Pointer to the GFAR memory mapped Registers */
+	u32 __iomem *hash_regs[16];
 	int hash_width;
 	struct net_device_stats stats; /* linux network statistics */
 	struct gfar_extra_stats extra_stats;
@@ -718,14 +718,14 @@ struct gfar_private {
 	uint32_t msg_enable;
 };
 
-static inline u32 gfar_read(volatile unsigned *addr)
+static inline u32 gfar_read(volatile unsigned __iomem *addr)
 {
 	u32 val;
 	val = in_be32(addr);
 	return val;
 }
 
-static inline void gfar_write(volatile unsigned *addr, u32 val)
+static inline void gfar_write(volatile unsigned __iomem *addr, u32 val)
 {
 	out_be32(addr, val);
 }
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 765e810620fe..5de7b2e259dc 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -144,11 +144,11 @@ static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy,
 	u64 *extra = (u64 *) & priv->extra_stats;
 
 	if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
-		u32 *rmon = (u32 *) & priv->regs->rmon;
+		u32 __iomem *rmon = (u32 __iomem *) & priv->regs->rmon;
 		struct gfar_stats *stats = (struct gfar_stats *) buf;
 
 		for (i = 0; i < GFAR_RMON_LEN; i++)
-			stats->rmon[i] = (u64) (rmon[i]);
+			stats->rmon[i] = (u64) gfar_read(&rmon[i]);
 
 		for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++)
 			stats->extra[i] = extra[i];
@@ -221,11 +221,11 @@ static void gfar_get_regs(struct net_device *dev, struct ethtool_regs *regs, voi
 {
 	int i;
 	struct gfar_private *priv = netdev_priv(dev);
-	u32 *theregs = (u32 *) priv->regs;
+	u32 __iomem *theregs = (u32 __iomem *) priv->regs;
 	u32 *buf = (u32 *) regbuf;
 
 	for (i = 0; i < sizeof (struct gfar) / sizeof (u32); i++)
-		buf[i] = theregs[i];
+		buf[i] = gfar_read(&theregs[i]);
 }
 
 /* Convert microseconds to ethernet clock ticks, which changes
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
index 74e52fcbf806..c6b725529af5 100644
--- a/drivers/net/gianfar_mii.c
+++ b/drivers/net/gianfar_mii.c
@@ -50,7 +50,7 @@
  * All PHY configuration is done through the TSEC1 MIIM regs */
 int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
 {
-	struct gfar_mii *regs = bus->priv;
+	struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
 
 	/* Set the PHY address and the register address we want to write */
 	gfar_write(&regs->miimadd, (mii_id << 8) | regnum);
@@ -70,7 +70,7 @@ int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
  * configuration has to be done through the TSEC1 MIIM regs */
 int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 {
-	struct gfar_mii *regs = bus->priv;
+	struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
 	u16 value;
 
 	/* Set the PHY address and the register address we want to read */
@@ -94,7 +94,7 @@ int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 /* Reset the MIIM registers, and wait for the bus to free */
 int gfar_mdio_reset(struct mii_bus *bus)
 {
-	struct gfar_mii *regs = bus->priv;
+	struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
 	unsigned int timeout = PHY_INIT_TIMEOUT;
 
 	spin_lock_bh(&bus->mdio_lock);
@@ -126,7 +126,7 @@ int gfar_mdio_probe(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct gianfar_mdio_data *pdata;
-	struct gfar_mii *regs;
+	struct gfar_mii __iomem *regs;
 	struct mii_bus *new_bus;
 	struct resource *r;
 	int err = 0;
@@ -155,15 +155,14 @@ int gfar_mdio_probe(struct device *dev)
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
 	/* Set the PHY base address */
-	regs = (struct gfar_mii *) ioremap(r->start,
-			sizeof (struct gfar_mii));
+	regs = ioremap(r->start, sizeof (struct gfar_mii));
 
 	if (NULL == regs) {
 		err = -ENOMEM;
 		goto reg_map_fail;
 	}
 
-	new_bus->priv = regs;
+	new_bus->priv = (void __force *)regs;
 
 	new_bus->irq = pdata->irq;
 
@@ -181,7 +180,7 @@ int gfar_mdio_probe(struct device *dev)
 	return 0;
 
 bus_register_fail:
-	iounmap((void *) regs);
+	iounmap(regs);
 reg_map_fail:
 	kfree(new_bus);
 
@@ -197,7 +196,7 @@ int gfar_mdio_remove(struct device *dev)
 
 	dev_set_drvdata(dev, NULL);
 
-	iounmap((void *) (&bus->priv));
+	iounmap((void __iomem *)bus->priv);
 	bus->priv = NULL;
 	kfree(bus);
 
diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c
index 3b1bef1ee215..77411a00d1ee 100644
--- a/drivers/net/hamradio/baycom_par.c
+++ b/drivers/net/hamradio/baycom_par.c
@@ -86,7 +86,6 @@
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
-#include <asm/bug.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 7ef4b0434a3f..c0998ef938e0 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -32,6 +32,8 @@
  */
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
+#include <linux/in.h>
+#include <linux/ip.h>
 #include <linux/tcp.h>
 #include <linux/udp.h>
 #include <linux/etherdevice.h>
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 1c6d328165bb..0245e40b51a1 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1610,6 +1610,8 @@ ppp_receive_nonmp_frame(struct ppp *ppp, struct sk_buff *skb)
 		}
 		else if (!pskb_may_pull(skb, skb->len))
 			goto err;
+		else
+			skb->ip_summed = CHECKSUM_NONE;
 
 		len = slhc_uncompress(ppp->vj, skb->data + 2, skb->len - 2);
 		if (len <= 0) {
@@ -1690,6 +1692,7 @@ ppp_receive_nonmp_frame(struct ppp *ppp, struct sk_buff *skb)
 			kfree_skb(skb);
 		} else {
 			skb_pull(skb, 2);	/* chop off protocol */
+			skb_postpull_rcsum(skb, skb->data - 2, 2);
 			skb->dev = ppp->dev;
 			skb->protocol = htons(npindex_to_ethertype[npi]);
 			skb->mac.raw = skb->data;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 2e1bed153c39..6e1018448eea 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -484,13 +484,12 @@ static void mdio_write(void __iomem *ioaddr, int RegAddr, int value)
 	int i;
 
 	RTL_W32(PHYAR, 0x80000000 | (RegAddr & 0xFF) << 16 | value);
-	udelay(1000);
 
-	for (i = 2000; i > 0; i--) {
+	for (i = 20; i > 0; i--) {
 		/* Check if the RTL8169 has completed writing to the specified MII register */
 		if (!(RTL_R32(PHYAR) & 0x80000000)) 
 			break;
-		udelay(100);
+		udelay(25);
 	}
 }
 
@@ -499,15 +498,14 @@ static int mdio_read(void __iomem *ioaddr, int RegAddr)
 	int i, value = -1;
 
 	RTL_W32(PHYAR, 0x0 | (RegAddr & 0xFF) << 16);
-	udelay(1000);
 
-	for (i = 2000; i > 0; i--) {
+	for (i = 20; i > 0; i--) {
 		/* Check if the RTL8169 has completed retrieving data from the specified MII register */
 		if (RTL_R32(PHYAR) & 0x80000000) {
 			value = (int) (RTL_R32(PHYAR) & 0xFFFF);
 			break;
 		}
-		udelay(100);
+		udelay(25);
 	}
 	return value;
 }
@@ -677,6 +675,9 @@ static int rtl8169_set_speed_xmii(struct net_device *dev,
 
 		if (duplex == DUPLEX_HALF)
 			auto_nego &= ~(PHY_Cap_10_Full | PHY_Cap_100_Full);
+
+		if (duplex == DUPLEX_FULL)
+			auto_nego &= ~(PHY_Cap_10_Half | PHY_Cap_100_Half);
 	}
 
 	tp->phy_auto_nego_reg = auto_nego;
diff --git a/drivers/net/sis900.h b/drivers/net/sis900.h
index 4233ea55670f..50323941e3c0 100644
--- a/drivers/net/sis900.h
+++ b/drivers/net/sis900.h
@@ -33,7 +33,6 @@ enum sis900_registers {
         rxcfg=0x34,             //Receive Configuration Register
         flctrl=0x38,            //Flow Control Register
         rxlen=0x3c,             //Receive Packet Length Register
-        cfgpmcsr=0x44,          //Configuration Power Management Control/Status Register
         rfcr=0x48,              //Receive Filter Control Register
         rfdr=0x4C,              //Receive Filter Data Register
         pmctrl=0xB0,            //Power Management Control Register
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index f8b973a04b65..cae2edf23004 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -23,12 +23,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-/*
- * TOTEST
- *	- speed setting
- *	- suspend/resume
- */
-
 #include <linux/config.h>
 #include <linux/crc32.h>
 #include <linux/kernel.h>
@@ -57,7 +51,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"0.13"
+#define DRV_VERSION		"0.15"
 #define PFX			DRV_NAME " "
 
 /*
@@ -102,6 +96,10 @@ static int copybreak __read_mostly = 256;
 module_param(copybreak, int, 0);
 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
 
+static int disable_msi = 0;
+module_param(disable_msi, int, 0);
+MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
+
 static const struct pci_device_id sky2_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
@@ -198,7 +196,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 
 	pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control);
-	vaux = (sky2_read8(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
+	vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
 		(power_control & PCI_PM_CAP_PME_D3cold);
 
 	pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control);
@@ -1834,6 +1832,8 @@ static int sky2_poll(struct net_device *dev0, int *budget)
 	u16 hwidx;
 	u16 tx_done[2] = { TX_NO_STATUS, TX_NO_STATUS };
 
+	sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+
 	hwidx = sky2_read16(hw, STAT_PUT_IDX);
 	BUG_ON(hwidx >= STATUS_RING_SIZE);
 	rmb();
@@ -1913,12 +1913,10 @@ static int sky2_poll(struct net_device *dev0, int *budget)
 	}
 
 exit_loop:
-	sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
-
 	sky2_tx_check(hw, 0, tx_done[0]);
 	sky2_tx_check(hw, 1, tx_done[1]);
 
-	if (sky2_read16(hw, STAT_PUT_IDX) == hw->st_idx) {
+	if (likely(work_done < to_do)) {
 		/* need to restart TX timer */
 		if (is_ec_a1(hw)) {
 			sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
@@ -2141,14 +2139,12 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
 
 static int sky2_reset(struct sky2_hw *hw)
 {
-	u32 ctst;
 	u16 status;
 	u8 t8, pmd_type;
-	int i;
-
-	ctst = sky2_read32(hw, B0_CTST);
+	int i, err;
 
 	sky2_write8(hw, B0_CTST, CS_RST_CLR);
+
 	hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
 	if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) {
 		printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n",
@@ -2156,12 +2152,6 @@ static int sky2_reset(struct sky2_hw *hw)
 		return -EOPNOTSUPP;
 	}
 
-	/* ring for status responses */
-	hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
-					 &hw->st_dma);
-	if (!hw->st_le)
-		return -ENOMEM;
-
 	/* disable ASF */
 	if (hw->chip_id <= CHIP_ID_YUKON_EC) {
 		sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
@@ -2173,19 +2163,24 @@ static int sky2_reset(struct sky2_hw *hw)
 	sky2_write8(hw, B0_CTST, CS_RST_CLR);
 
 	/* clear PCI errors, if any */
-	pci_read_config_word(hw->pdev, PCI_STATUS, &status);
+	err = pci_read_config_word(hw->pdev, PCI_STATUS, &status);
+	if (err)
+		goto pci_err;
+
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-	pci_write_config_word(hw->pdev, PCI_STATUS,
-			      status | PCI_STATUS_ERROR_BITS);
+	err = pci_write_config_word(hw->pdev, PCI_STATUS,
+				    status | PCI_STATUS_ERROR_BITS);
+	if (err)
+		goto pci_err;
 
 	sky2_write8(hw, B0_CTST, CS_MRST_CLR);
 
 	/* clear any PEX errors */
-	if (is_pciex(hw)) {
-		u16 lstat;
-		pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
-				       0xffffffffUL);
-		pci_read_config_word(hw->pdev, PEX_LNK_STAT, &lstat);
+	if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) {
+		err = pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
+						 0xffffffffUL);
+		if (err)
+			goto pci_err;
 	}
 
 	pmd_type = sky2_read8(hw, B2_PMD_TYP);
@@ -2297,6 +2292,14 @@ static int sky2_reset(struct sky2_hw *hw)
 	sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
 
 	return 0;
+
+pci_err:
+	/* This is to catch a BIOS bug workaround where
+	 * mmconfig table doesn't have other buses.
+	 */
+	printk(KERN_ERR PFX "%s: can't access PCI config space\n",
+	       pci_name(hw->pdev));
+	return err;
 }
 
 static u32 sky2_supported_modes(const struct sky2_hw *hw)
@@ -2551,19 +2554,24 @@ static struct net_device_stats *sky2_get_stats(struct net_device *dev)
 static int sky2_set_mac_address(struct net_device *dev, void *p)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
-	struct sockaddr *addr = p;
+	struct sky2_hw *hw = sky2->hw;
+	unsigned port = sky2->port;
+	const struct sockaddr *addr = p;
 
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EADDRNOTAVAIL;
 
 	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
-	memcpy_toio(sky2->hw->regs + B2_MAC_1 + sky2->port * 8,
+	memcpy_toio(hw->regs + B2_MAC_1 + port * 8,
 		    dev->dev_addr, ETH_ALEN);
-	memcpy_toio(sky2->hw->regs + B2_MAC_2 + sky2->port * 8,
+	memcpy_toio(hw->regs + B2_MAC_2 + port * 8,
 		    dev->dev_addr, ETH_ALEN);
 
-	if (netif_running(dev))
-		sky2_phy_reinit(sky2);
+	/* virtual address for data */
+	gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
+
+	/* physical address: used for pause frames */
+	gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
 
 	return 0;
 }
@@ -2843,7 +2851,7 @@ static int sky2_set_coalesce(struct net_device *dev,
 	if (ecmd->rx_coalesce_usecs_irq == 0)
 		sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
 	else {
-		sky2_write32(hw, STAT_TX_TIMER_INI,
+		sky2_write32(hw, STAT_ISR_TIMER_INI,
 			     sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
 		sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
 	}
@@ -3055,6 +3063,61 @@ static void __devinit sky2_show_addr(struct net_device *dev)
 		       dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
 }
 
+/* Handle software interrupt used during MSI test */
+static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id,
+					    struct pt_regs *regs)
+{
+	struct sky2_hw *hw = dev_id;
+	u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
+
+	if (status == 0)
+		return IRQ_NONE;
+
+	if (status & Y2_IS_IRQ_SW) {
+		sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
+		hw->msi = 1;
+	}
+	sky2_write32(hw, B0_Y2_SP_ICR, 2);
+
+	sky2_read32(hw, B0_IMSK);
+	return IRQ_HANDLED;
+}
+
+/* Test interrupt path by forcing a a software IRQ */
+static int __devinit sky2_test_msi(struct sky2_hw *hw)
+{
+	struct pci_dev *pdev = hw->pdev;
+	int i, err;
+
+	sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
+
+	err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw);
+	if (err) {
+		printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
+		       pci_name(pdev), pdev->irq);
+		return err;
+	}
+
+	sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
+	wmb();
+
+	for (i = 0; i < 10; i++) {
+		barrier();
+		if (hw->msi)
+			goto found;
+		mdelay(1);
+	}
+
+	err = -EOPNOTSUPP;
+	sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
+ found:
+	sky2_write32(hw, B0_IMSK, 0);
+
+	free_irq(pdev->irq, hw);
+
+	return err;
+}
+
 static int __devinit sky2_probe(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
@@ -3135,6 +3198,12 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 	}
 	hw->pm_cap = pm_cap;
 
+	/* ring for status responses */
+	hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
+					 &hw->st_dma);
+	if (!hw->st_le)
+		goto err_out_iounmap;
+
 	err = sky2_reset(hw);
 	if (err)
 		goto err_out_iounmap;
@@ -3169,7 +3238,22 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 		}
 	}
 
-	err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw);
+	if (!disable_msi && pci_enable_msi(pdev) == 0) {
+		err = sky2_test_msi(hw);
+		if (err == -EOPNOTSUPP) {
+			/* MSI test failed, go back to INTx mode */
+			printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
+			       "switching to INTx mode. Please report this failure to "
+			       "the PCI maintainer and include system chipset information.\n",
+			       pci_name(pdev));
+			pci_disable_msi(pdev);
+		}
+		else if (err)
+			goto err_out_unregister;
+	}
+
+	err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM,
+			  DRV_NAME, hw);
 	if (err) {
 		printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
 		       pci_name(pdev), pdev->irq);
@@ -3184,6 +3268,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 	return 0;
 
 err_out_unregister:
+	if (hw->msi)
+		pci_disable_msi(pdev);
 	if (dev1) {
 		unregister_netdev(dev1);
 		free_netdev(dev1);
@@ -3226,6 +3312,8 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
 	sky2_read8(hw, B0_CTST);
 
 	free_irq(pdev->irq, hw);
+	if (hw->msi)
+		pci_disable_msi(pdev);
 	pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
@@ -3263,25 +3351,33 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 static int sky2_resume(struct pci_dev *pdev)
 {
 	struct sky2_hw *hw = pci_get_drvdata(pdev);
-	int i;
+	int i, err;
 
 	pci_restore_state(pdev);
 	pci_enable_wake(pdev, PCI_D0, 0);
-	sky2_set_power_state(hw, PCI_D0);
+	err = sky2_set_power_state(hw, PCI_D0);
+	if (err)
+		goto out;
 
-	sky2_reset(hw);
+	err = sky2_reset(hw);
+	if (err)
+		goto out;
 
 	for (i = 0; i < 2; i++) {
 		struct net_device *dev = hw->dev[i];
-		if (dev) {
-			if (netif_running(dev)) {
-				netif_device_attach(dev);
-				if (sky2_up(dev))
-					dev_close(dev);
+		if (dev && netif_running(dev)) {
+			netif_device_attach(dev);
+			err = sky2_up(dev);
+			if (err) {
+				printk(KERN_ERR PFX "%s: could not up: %d\n",
+				       dev->name, err);
+				dev_close(dev);
+				break;
 			}
 		}
 	}
-	return 0;
+out:
+	return err;
 }
 #endif
 
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 95518921001c..fd12c289a238 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1841,6 +1841,7 @@ struct sky2_hw {
 	struct net_device    *dev[2];
 
 	int		     pm_cap;
+	int		     msi;
 	u8	     	     chip_id;
 	u8		     chip_rev;
 	u8		     copper;
@@ -1867,14 +1868,6 @@ static inline u8 sky2_read8(const struct sky2_hw *hw, unsigned reg)
 	return readb(hw->regs + reg);
 }
 
-/* This should probably go away, bus based tweeks suck */
-static inline int is_pciex(const struct sky2_hw *hw)
-{
-	u32 status;
-	pci_read_config_dword(hw->pdev, PCI_DEV_STATUS, &status);
-	return (status & PCI_OS_PCI_X) == 0;
-}
-
 static inline void sky2_write32(const struct sky2_hw *hw, unsigned reg, u32 val)
 {
 	writel(val, hw->regs + reg);
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f2d1dafde087..e7dc653d5bd6 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.48"
-#define DRV_MODULE_RELDATE	"Jan 16, 2006"
+#define DRV_MODULE_VERSION	"3.49"
+#define DRV_MODULE_RELDATE	"Feb 2, 2006"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -3482,6 +3482,17 @@ static void tg3_reset_task(void *_data)
 	struct tg3 *tp = _data;
 	unsigned int restart_timer;
 
+	tg3_full_lock(tp, 0);
+	tp->tg3_flags |= TG3_FLAG_IN_RESET_TASK;
+
+	if (!netif_running(tp->dev)) {
+		tp->tg3_flags &= ~TG3_FLAG_IN_RESET_TASK;
+		tg3_full_unlock(tp);
+		return;
+	}
+
+	tg3_full_unlock(tp);
+
 	tg3_netif_stop(tp);
 
 	tg3_full_lock(tp, 1);
@@ -3494,10 +3505,12 @@ static void tg3_reset_task(void *_data)
 
 	tg3_netif_start(tp);
 
-	tg3_full_unlock(tp);
-
 	if (restart_timer)
 		mod_timer(&tp->timer, jiffies + 1);
+
+	tp->tg3_flags &= ~TG3_FLAG_IN_RESET_TASK;
+
+	tg3_full_unlock(tp);
 }
 
 static void tg3_tx_timeout(struct net_device *dev)
@@ -6786,6 +6799,13 @@ static int tg3_close(struct net_device *dev)
 {
 	struct tg3 *tp = netdev_priv(dev);
 
+	/* Calling flush_scheduled_work() may deadlock because
+	 * linkwatch_event() may be on the workqueue and it will try to get
+	 * the rtnl_lock which we are holding.
+	 */
+	while (tp->tg3_flags & TG3_FLAG_IN_RESET_TASK)
+		msleep(1);
+
 	netif_stop_queue(dev);
 
 	del_timer_sync(&tp->timer);
@@ -10880,6 +10900,7 @@ static void __devexit tg3_remove_one(struct pci_dev *pdev)
 	if (dev) {
 		struct tg3 *tp = netdev_priv(dev);
 
+		flush_scheduled_work();
 		unregister_netdev(dev);
 		if (tp->regs) {
 			iounmap(tp->regs);
@@ -10901,6 +10922,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
 	if (!netif_running(dev))
 		return 0;
 
+	flush_scheduled_work();
 	tg3_netif_stop(tp);
 
 	del_timer_sync(&tp->timer);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index e8243305f0e8..7f4b7f6ac40d 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2162,6 +2162,7 @@ struct tg3 {
 #define TG3_FLAG_JUMBO_RING_ENABLE	0x00800000
 #define TG3_FLAG_10_100_ONLY		0x01000000
 #define TG3_FLAG_PAUSE_AUTONEG		0x02000000
+#define TG3_FLAG_IN_RESET_TASK		0x04000000
 #define TG3_FLAG_BROKEN_CHECKSUMS	0x10000000
 #define TG3_FLAG_GOT_SERDES_FLOWCTL	0x20000000
 #define TG3_FLAG_SPLIT_MODE		0x40000000
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 983981666800..238e9c72cb3a 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -214,7 +214,7 @@ static u32 uli526x_cr6_user_set;
 /* For module input parameter */
 static int debug;
 static u32 cr6set;
-static unsigned char mode = 8;
+static int mode = 8;
 
 /* function declaration ------------------------------------- */
 static int uli526x_open(struct net_device *);
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 2f61a47b4716..1ff5de076d21 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -1943,7 +1943,7 @@ static int dscc4_init_ring(struct net_device *dev)
 					(++i%TX_RING_SIZE)*sizeof(*tx_fd));
 	} while (i < TX_RING_SIZE);
 
-	if (dscc4_init_dummy_skb(dpriv) < 0)
+	if (!dscc4_init_dummy_skb(dpriv))
 		goto err_free_dma_tx;
 
 	memset(dpriv->rx_skbuff, 0, sizeof(struct sk_buff *)*RX_RING_SIZE);
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
index 8dea07b47999..eba8e5cfacc2 100644
--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -29,7 +29,7 @@
 #include <linux/netdevice.h>
 #include <linux/hdlc.h>
 #include <linux/pci.h>
-#include <asm/delay.h>
+#include <linux/delay.h>
 #include <asm/io.h>
 
 #include "hd64572.h"
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index 9c1e10602f2b..9d3b51c3ef54 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -27,8 +27,8 @@
 #include <linux/hdlc.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
+#include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/delay.h>
 
 #include "wanxl.h"
 
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index c5cd61c7f927..e5bb9f5ae429 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -748,7 +748,7 @@ prism54_get_essid(struct net_device *ndev, struct iw_request_info *info,
 	if (essid->length) {
 		dwrq->flags = 1;	/* set ESSID to ON for Wireless Extensions */
 		/* if it is to big, trunk it */
-		dwrq->length = min(IW_ESSID_MAX_SIZE, essid->length);
+		dwrq->length = min((u8)IW_ESSID_MAX_SIZE, essid->length);
 	} else {
 		dwrq->flags = 0;
 		dwrq->length = 0;
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 9e0229f7e25f..f46e8438e0d2 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1423,7 +1423,7 @@ static void __init ccio_init_resources(struct ioc *ioc)
 	struct resource *res = ioc->mmio_region;
 	char *name = kmalloc(14, GFP_KERNEL);
 
-	sprintf(name, "GSC Bus [%d/]", ioc->hw_path);
+	snprintf(name, 14, "GSC Bus [%d/]", ioc->hw_path);
 
 	ccio_init_resource(res, name, &ioc->ioc_regs->io_io_low);
 	ccio_init_resource(res + 1, name, &ioc->ioc_regs->io_io_low_hv);
@@ -1557,12 +1557,11 @@ static int ccio_probe(struct parisc_device *dev)
 	int i;
 	struct ioc *ioc, **ioc_p = &ioc_list;
 	
-	ioc = kmalloc(sizeof(struct ioc), GFP_KERNEL);
+	ioc = kzalloc(sizeof(struct ioc), GFP_KERNEL);
 	if (ioc == NULL) {
 		printk(KERN_ERR MODULE_NAME ": memory allocation failure\n");
 		return 1;
 	}
-	memset(ioc, 0, sizeof(struct ioc));
 
 	ioc->name = dev->id.hversion == U2_IOA_RUNWAY ? "U2" : "UTurn";
 
@@ -1578,7 +1577,7 @@ static int ccio_probe(struct parisc_device *dev)
 	ccio_ioc_init(ioc);
 	ccio_init_resources(ioc);
 	hppa_dma_ops = &ccio_ops;
-	dev->dev.platform_data = kmalloc(sizeof(struct pci_hba_data), GFP_KERNEL);
+	dev->dev.platform_data = kzalloc(sizeof(struct pci_hba_data), GFP_KERNEL);
 
 	/* if this fails, no I/O cards will work, so may as well bug */
 	BUG_ON(dev->dev.platform_data == NULL);
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 216d1d859326..3d1a7f98c676 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -989,14 +989,12 @@ static int __init dino_probe(struct parisc_device *dev)
 */
 	}
 
-	dino_dev = kmalloc(sizeof(struct dino_device), GFP_KERNEL);
+	dino_dev = kzalloc(sizeof(struct dino_device), GFP_KERNEL);
 	if (!dino_dev) {
 		printk("dino_init_chip - couldn't alloc dino_device\n");
 		return 1;
 	}
 
-	memset(dino_dev, 0, sizeof(struct dino_device));
-
 	dino_dev->hba.dev = dev;
 	dino_dev->hba.base_addr = ioremap(hpa, 4096);
 	dino_dev->hba.lmmio_space_offset = 0;	/* CPU addrs == bus addrs */
diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c
index 5edf93f80757..07dc2b6d4e93 100644
--- a/drivers/parisc/hppb.c
+++ b/drivers/parisc/hppb.c
@@ -60,12 +60,11 @@ static int hppb_probe(struct parisc_device *dev)
 	}
 
 	if(card->hpa) {
-		card->next = kmalloc(sizeof(struct hppb_card), GFP_KERNEL);
+		card->next = kzalloc(sizeof(struct hppb_card), GFP_KERNEL);
 		if(!card->next) {
 			printk(KERN_ERR "HP-PB: Unable to allocate memory.\n");
 			return 1;
 		}
-		memset(card->next, '\0', sizeof(struct hppb_card));
 		card = card->next;
 	}
         printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa.start);
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 19657efa8dc3..8d7a36392eb8 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -873,28 +873,24 @@ void *iosapic_register(unsigned long hpa)
 		return NULL;
 	}
 
-	isi = (struct iosapic_info *)kmalloc(sizeof(struct iosapic_info), GFP_KERNEL);
+	isi = (struct iosapic_info *)kzalloc(sizeof(struct iosapic_info), GFP_KERNEL);
 	if (!isi) {
 		BUG();
 		return NULL;
 	}
 
-	memset(isi, 0, sizeof(struct iosapic_info));
-
 	isi->addr = ioremap(hpa, 4096);
 	isi->isi_hpa = hpa;
 	isi->isi_version = iosapic_rd_version(isi);
 	isi->isi_num_vectors = IOSAPIC_IRDT_MAX_ENTRY(isi->isi_version) + 1;
 
 	vip = isi->isi_vector = (struct vector_info *)
-		kmalloc(sizeof(struct vector_info) * isi->isi_num_vectors, GFP_KERNEL);
+		kzalloc(sizeof(struct vector_info) * isi->isi_num_vectors, GFP_KERNEL);
 	if (vip == NULL) {
 		kfree(isi);
 		return NULL;
 	}
 
-	memset(vip, 0, sizeof(struct vector_info) * isi->isi_num_vectors);
-
 	for (cnt=0; cnt < isi->isi_num_vectors; cnt++, vip++) {
 		vip->irqline = (unsigned char) cnt;
 		vip->iosapic = isi;
diff --git a/drivers/parisc/lasi.c b/drivers/parisc/lasi.c
index 2b3ba1dcf332..cb3d28176129 100644
--- a/drivers/parisc/lasi.c
+++ b/drivers/parisc/lasi.c
@@ -166,11 +166,12 @@ static void lasi_power_off(void)
 int __init
 lasi_init_chip(struct parisc_device *dev)
 {
+	extern void (*chassis_power_off)(void);
 	struct gsc_asic *lasi;
 	struct gsc_irq gsc_irq;
 	int ret;
 
-	lasi = kmalloc(sizeof(*lasi), GFP_KERNEL);
+	lasi = kzalloc(sizeof(*lasi), GFP_KERNEL);
 	if (!lasi)
 		return -ENOMEM;
 
@@ -222,7 +223,7 @@ lasi_init_chip(struct parisc_device *dev)
 	 * ensure that only the first LASI (the one controlling the power off)
 	 * should set the HPA here */
 	lasi_power_off_hpa = lasi->hpa;
-	pm_power_off = lasi_power_off;
+	chassis_power_off = lasi_power_off;
 	
 	return ret;
 }
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index cbae8c8963fa..e8a2a4a852f5 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -1565,7 +1565,7 @@ lba_driver_probe(struct parisc_device *dev)
 	} else if (IS_MERCURY(dev) || IS_QUICKSILVER(dev)) {
 		func_class &= 0xff;
 		version = kmalloc(6, GFP_KERNEL);
-		sprintf(version,"TR%d.%d",(func_class >> 4),(func_class & 0xf));
+		snprintf(version, 6, "TR%d.%d",(func_class >> 4),(func_class & 0xf));
 		/* We could use one printk for both Elroy and Mercury,
                  * but for the mask for func_class.
                  */ 
@@ -1586,14 +1586,12 @@ lba_driver_probe(struct parisc_device *dev)
 	**	have an IRT entry will get NULL back from iosapic code.
 	*/
 	
-	lba_dev = kmalloc(sizeof(struct lba_device), GFP_KERNEL);
+	lba_dev = kzalloc(sizeof(struct lba_device), GFP_KERNEL);
 	if (!lba_dev) {
 		printk(KERN_ERR "lba_init_chip - couldn't alloc lba_device\n");
 		return(1);
 	}
 
-	memset(lba_dev, 0, sizeof(struct lba_device));
-
 
 	/* ---------- First : initialize data we already have --------- */
 
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 42a3c54e8e6c..a28e17898fbd 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -1,7 +1,7 @@
 /* 
  *    Interfaces to retrieve and set PDC Stable options (firmware)
  *
- *    Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *    Copyright (C) 2005-2006 Thibaut VARENE <varenet@parisc-linux.org>
  *
  *    This program is free software; you can redistribute it and/or modify
  *    it under the terms of the GNU General Public License as published by
@@ -26,11 +26,19 @@
  *
  *    Since locations between 96 and 192 are the various paths, most (if not
  *    all) PA-RISC machines should have them. Anyway, for safety reasons, the
- *    following code can deal with only 96 bytes of Stable Storage, and all
+ *    following code can deal with just 96 bytes of Stable Storage, and all
  *    sizes between 96 and 192 bytes (provided they are multiple of struct
  *    device_path size, eg: 128, 160 and 192) to provide full information.
  *    The code makes no use of data above 192 bytes. One last word: there's one
  *    path we can always count on: the primary path.
+ *
+ *    The current policy wrt file permissions is:
+ *	- write: root only
+ *	- read: (reading triggers PDC calls) ? root only : everyone
+ *    The rationale is that PDC calls could hog (DoS) the machine.
+ *
+ *	TODO:
+ *	- timer/fastsize write calls
  */
 
 #undef PDCS_DEBUG
@@ -50,13 +58,15 @@
 #include <linux/kobject.h>
 #include <linux/device.h>
 #include <linux/errno.h>
+#include <linux/spinlock.h>
 
 #include <asm/pdc.h>
 #include <asm/page.h>
 #include <asm/uaccess.h>
 #include <asm/hardware.h>
 
-#define PDCS_VERSION	"0.10"
+#define PDCS_VERSION	"0.22"
+#define PDCS_PREFIX	"PDC Stable Storage"
 
 #define PDCS_ADDR_PPRI	0x00
 #define PDCS_ADDR_OSID	0x40
@@ -70,10 +80,12 @@ MODULE_DESCRIPTION("sysfs interface to HP PDC Stable Storage data");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(PDCS_VERSION);
 
+/* holds Stable Storage size. Initialized once and for all, no lock needed */
 static unsigned long pdcs_size __read_mostly;
 
 /* This struct defines what we need to deal with a parisc pdc path entry */
 struct pdcspath_entry {
+	rwlock_t rw_lock;		/* to protect path entry access */
 	short ready;			/* entry record is valid if != 0 */
 	unsigned long addr;		/* entry address in stable storage */
 	char *name;			/* entry name */
@@ -121,6 +133,8 @@ struct pdcspath_attribute paths_attr_##_name = { \
  * content of the stable storage WRT various paths in these structs. We read
  * these structs when reading the files, and we will write to these structs when
  * writing to the files, and only then write them back to the Stable Storage.
+ *
+ * This function expects to be called with @entry->rw_lock write-hold.
  */
 static int
 pdcspath_fetch(struct pdcspath_entry *entry)
@@ -160,14 +174,15 @@ pdcspath_fetch(struct pdcspath_entry *entry)
  * pointer, from which it'll find out the corresponding hardware path.
  * For now we do not handle the case where there's an error in writing to the
  * Stable Storage area, so you'd better not mess up the data :P
+ *
+ * This function expects to be called with @entry->rw_lock write-hold.
  */
-static int
+static void
 pdcspath_store(struct pdcspath_entry *entry)
 {
 	struct device_path *devpath;
 
-	if (!entry)
-		return -EINVAL;
+	BUG_ON(!entry);
 
 	devpath = &entry->devpath;
 	
@@ -176,10 +191,8 @@ pdcspath_store(struct pdcspath_entry *entry)
 	   First case, we don't have a preset hwpath... */
 	if (!entry->ready) {
 		/* ...but we have a device, map it */
-		if (entry->dev)
-			device_to_hwpath(entry->dev, (struct hardware_path *)devpath);
-		else
-			return -EINVAL;
+		BUG_ON(!entry->dev);
+		device_to_hwpath(entry->dev, (struct hardware_path *)devpath);
 	}
 	/* else, we expect the provided hwpath to be valid. */
 	
@@ -191,15 +204,13 @@ pdcspath_store(struct pdcspath_entry *entry)
 		printk(KERN_ERR "%s: an error occured when writing to PDC.\n"
 				"It is likely that the Stable Storage data has been corrupted.\n"
 				"Please check it carefully upon next reboot.\n", __func__);
-		return -EIO;
+		WARN_ON(1);
 	}
 		
 	/* kobject is already registered */
 	entry->ready = 2;
 	
 	DPRINTK("%s: device: 0x%p\n", __func__, entry->dev);
-	
-	return 0;
 }
 
 /**
@@ -214,14 +225,17 @@ pdcspath_hwpath_read(struct pdcspath_entry *entry, char *buf)
 {
 	char *out = buf;
 	struct device_path *devpath;
-	unsigned short i;
+	short i;
 
 	if (!entry || !buf)
 		return -EINVAL;
 
+	read_lock(&entry->rw_lock);
 	devpath = &entry->devpath;
+	i = entry->ready;
+	read_unlock(&entry->rw_lock);
 
-	if (!entry->ready)
+	if (!i)	/* entry is not ready */
 		return -ENODATA;
 	
 	for (i = 0; i < 6; i++) {
@@ -242,7 +256,7 @@ pdcspath_hwpath_read(struct pdcspath_entry *entry, char *buf)
  * 
  * We will call this function to change the current hardware path.
  * Hardware paths are to be given '/'-delimited, without brackets.
- * We take care to make sure that the provided path actually maps to an existing
+ * We make sure that the provided path actually maps to an existing
  * device, BUT nothing would prevent some foolish user to set the path to some
  * PCI bridge or even a CPU...
  * A better work around would be to make sure we are at the end of a device tree
@@ -298,17 +312,19 @@ pdcspath_hwpath_write(struct pdcspath_entry *entry, const char *buf, size_t coun
 	}
 	
 	/* So far so good, let's get in deep */
+	write_lock(&entry->rw_lock);
 	entry->ready = 0;
 	entry->dev = dev;
 	
 	/* Now, dive in. Write back to the hardware */
-	WARN_ON(pdcspath_store(entry));	/* this warn should *NEVER* happen */
+	pdcspath_store(entry);
 	
 	/* Update the symlink to the real device */
 	sysfs_remove_link(&entry->kobj, "device");
 	sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+	write_unlock(&entry->rw_lock);
 	
-	printk(KERN_INFO "PDC Stable Storage: changed \"%s\" path to \"%s\"\n",
+	printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" path to \"%s\"\n",
 		entry->name, buf);
 	
 	return count;
@@ -326,14 +342,17 @@ pdcspath_layer_read(struct pdcspath_entry *entry, char *buf)
 {
 	char *out = buf;
 	struct device_path *devpath;
-	unsigned short i;
+	short i;
 
 	if (!entry || !buf)
 		return -EINVAL;
 	
+	read_lock(&entry->rw_lock);
 	devpath = &entry->devpath;
+	i = entry->ready;
+	read_unlock(&entry->rw_lock);
 
-	if (!entry->ready)
+	if (!i)	/* entry is not ready */
 		return -ENODATA;
 	
 	for (i = 0; devpath->layers[i] && (likely(i < 6)); i++)
@@ -388,15 +407,17 @@ pdcspath_layer_write(struct pdcspath_entry *entry, const char *buf, size_t count
 	}
 		
 	/* So far so good, let's get in deep */
+	write_lock(&entry->rw_lock);
 	
 	/* First, overwrite the current layers with the new ones, not touching
 	   the hardware path. */
 	memcpy(&entry->devpath.layers, &layers, sizeof(layers));
 	
 	/* Now, dive in. Write back to the hardware */
-	WARN_ON(pdcspath_store(entry));	/* this warn should *NEVER* happen */
+	pdcspath_store(entry);
+	write_unlock(&entry->rw_lock);
 	
-	printk(KERN_INFO "PDC Stable Storage: changed \"%s\" layers to \"%s\"\n",
+	printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" layers to \"%s\"\n",
 		entry->name, buf);
 	
 	return count;
@@ -415,9 +436,6 @@ pdcspath_attr_show(struct kobject *kobj, struct attribute *attr, char *buf)
 	struct pdcspath_attribute *pdcs_attr = to_pdcspath_attribute(attr);
 	ssize_t ret = 0;
 
-	if (!capable(CAP_SYS_ADMIN))
-		return -EACCES;
-
 	if (pdcs_attr->show)
 		ret = pdcs_attr->show(entry, buf);
 
@@ -454,8 +472,8 @@ static struct sysfs_ops pdcspath_attr_ops = {
 };
 
 /* These are the two attributes of any PDC path. */
-static PATHS_ATTR(hwpath, 0600, pdcspath_hwpath_read, pdcspath_hwpath_write);
-static PATHS_ATTR(layer, 0600, pdcspath_layer_read, pdcspath_layer_write);
+static PATHS_ATTR(hwpath, 0644, pdcspath_hwpath_read, pdcspath_hwpath_write);
+static PATHS_ATTR(layer, 0644, pdcspath_layer_read, pdcspath_layer_write);
 
 static struct attribute *paths_subsys_attrs[] = {
 	&paths_attr_hwpath.attr,
@@ -484,36 +502,119 @@ static struct pdcspath_entry *pdcspath_entries[] = {
 	NULL,
 };
 
+
+/* For more insight of what's going on here, refer to PDC Procedures doc,
+ * Section PDC_STABLE */
+
 /**
- * pdcs_info_read - Pretty printing of the remaining useful data.
+ * pdcs_size_read - Stable Storage size output.
  * @entry: An allocated and populated subsytem struct. We don't use it tho.
  * @buf: The output buffer to write to.
- * 
- * We will call this function to format the output of the 'info' attribute file.
- * Please refer to PDC Procedures documentation, section PDC_STABLE to get a
- * better insight of what we're doing here.
  */
 static ssize_t
-pdcs_info_read(struct subsystem *entry, char *buf)
+pdcs_size_read(struct subsystem *entry, char *buf)
 {
 	char *out = buf;
-	__u32 result;
-	struct device_path devpath;
-	char *tmpstr = NULL;
 	
 	if (!entry || !buf)
 		return -EINVAL;
 		
 	/* show the size of the stable storage */
-	out += sprintf(out, "Stable Storage size: %ld bytes\n", pdcs_size);
+	out += sprintf(out, "%ld\n", pdcs_size);
 
-	/* deal with flags */
-	if (pdc_stable_read(PDCS_ADDR_PPRI, &devpath, sizeof(devpath)) != PDC_OK)
-		return -EIO;
+	return out - buf;
+}
+
+/**
+ * pdcs_auto_read - Stable Storage autoboot/search flag output.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ * @knob: The PF_AUTOBOOT or PF_AUTOSEARCH flag
+ */
+static ssize_t
+pdcs_auto_read(struct subsystem *entry, char *buf, int knob)
+{
+	char *out = buf;
+	struct pdcspath_entry *pathentry;
 	
-	out += sprintf(out, "Autoboot: %s\n", (devpath.flags & PF_AUTOBOOT) ? "On" : "Off");
-	out += sprintf(out, "Autosearch: %s\n", (devpath.flags & PF_AUTOSEARCH) ? "On" : "Off");
-	out += sprintf(out, "Timer: %u s\n", (devpath.flags & PF_TIMER) ? (1 << (devpath.flags & PF_TIMER)) : 0);
+	if (!entry || !buf)
+		return -EINVAL;
+
+	/* Current flags are stored in primary boot path entry */
+	pathentry = &pdcspath_entry_primary;
+
+	read_lock(&pathentry->rw_lock);
+	out += sprintf(out, "%s\n", (pathentry->devpath.flags & knob) ?
+					"On" : "Off");
+	read_unlock(&pathentry->rw_lock);
+
+	return out - buf;
+}
+
+/**
+ * pdcs_autoboot_read - Stable Storage autoboot flag output.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ */
+static inline ssize_t
+pdcs_autoboot_read(struct subsystem *entry, char *buf)
+{
+	return pdcs_auto_read(entry, buf, PF_AUTOBOOT);
+}
+
+/**
+ * pdcs_autosearch_read - Stable Storage autoboot flag output.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ */
+static inline ssize_t
+pdcs_autosearch_read(struct subsystem *entry, char *buf)
+{
+	return pdcs_auto_read(entry, buf, PF_AUTOSEARCH);
+}
+
+/**
+ * pdcs_timer_read - Stable Storage timer count output (in seconds).
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ *
+ * The value of the timer field correponds to a number of seconds in powers of 2.
+ */
+static ssize_t
+pdcs_timer_read(struct subsystem *entry, char *buf)
+{
+	char *out = buf;
+	struct pdcspath_entry *pathentry;
+
+	if (!entry || !buf)
+		return -EINVAL;
+
+	/* Current flags are stored in primary boot path entry */
+	pathentry = &pdcspath_entry_primary;
+
+	/* print the timer value in seconds */
+	read_lock(&pathentry->rw_lock);
+	out += sprintf(out, "%u\n", (pathentry->devpath.flags & PF_TIMER) ?
+				(1 << (pathentry->devpath.flags & PF_TIMER)) : 0);
+	read_unlock(&pathentry->rw_lock);
+
+	return out - buf;
+}
+
+/**
+ * pdcs_osid_read - Stable Storage OS ID register output.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ */
+static ssize_t
+pdcs_osid_read(struct subsystem *entry, char *buf)
+{
+	char *out = buf;
+	__u32 result;
+	char *tmpstr = NULL;
+
+	if (!entry || !buf)
+		return -EINVAL;
 
 	/* get OSID */
 	if (pdc_stable_read(PDCS_ADDR_OSID, &result, sizeof(result)) != PDC_OK)
@@ -529,13 +630,31 @@ pdcs_info_read(struct subsystem *entry, char *buf)
 		case 0x0005:	tmpstr = "Novell Netware dependent data"; break;
 		default:	tmpstr = "Unknown"; break;
 	}
-	out += sprintf(out, "OS ID: %s (0x%.4x)\n", tmpstr, (result >> 16));
+	out += sprintf(out, "%s (0x%.4x)\n", tmpstr, (result >> 16));
+
+	return out - buf;
+}
+
+/**
+ * pdcs_fastsize_read - Stable Storage FastSize register output.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The output buffer to write to.
+ *
+ * This register holds the amount of system RAM to be tested during boot sequence.
+ */
+static ssize_t
+pdcs_fastsize_read(struct subsystem *entry, char *buf)
+{
+	char *out = buf;
+	__u32 result;
+
+	if (!entry || !buf)
+		return -EINVAL;
 
 	/* get fast-size */
 	if (pdc_stable_read(PDCS_ADDR_FSIZ, &result, sizeof(result)) != PDC_OK)
 		return -EIO;
 
-	out += sprintf(out, "Memory tested: ");
 	if ((result & 0x0F) < 0x0E)
 		out += sprintf(out, "%d kB", (1<<(result & 0x0F))*256);
 	else
@@ -546,22 +665,18 @@ pdcs_info_read(struct subsystem *entry, char *buf)
 }
 
 /**
- * pdcs_info_write - This function handles boot flag modifying.
+ * pdcs_auto_write - This function handles autoboot/search flag modifying.
  * @entry: An allocated and populated subsytem struct. We don't use it tho.
  * @buf: The input buffer to read from.
  * @count: The number of bytes to be read.
+ * @knob: The PF_AUTOBOOT or PF_AUTOSEARCH flag
  * 
- * We will call this function to change the current boot flags.
+ * We will call this function to change the current autoboot flag.
  * We expect a precise syntax:
- *	\"n n\" (n == 0 or 1) to toggle respectively AutoBoot and AutoSearch
- *
- * As of now there is no incentive on my side to provide more "knobs" to that
- * interface, since modifying the rest of the data is pretty meaningless when
- * the machine is running and for the expected use of that facility, such as
- * PALO setting up the boot disk when installing a Linux distribution...
+ *	\"n\" (n == 0 or 1) to toggle AutoBoot Off or On
  */
 static ssize_t
-pdcs_info_write(struct subsystem *entry, const char *buf, size_t count)
+pdcs_auto_write(struct subsystem *entry, const char *buf, size_t count, int knob)
 {
 	struct pdcspath_entry *pathentry;
 	unsigned char flags;
@@ -582,7 +697,9 @@ pdcs_info_write(struct subsystem *entry, const char *buf, size_t count)
 	pathentry = &pdcspath_entry_primary;
 	
 	/* Be nice to the existing flag record */
+	read_lock(&pathentry->rw_lock);
 	flags = pathentry->devpath.flags;
+	read_unlock(&pathentry->rw_lock);
 	
 	DPRINTK("%s: flags before: 0x%X\n", __func__, flags);
 			
@@ -595,50 +712,85 @@ pdcs_info_write(struct subsystem *entry, const char *buf, size_t count)
 	if ((c != 0) && (c != 1))
 		goto parse_error;
 	if (c == 0)
-		flags &= ~PF_AUTOBOOT;
+		flags &= ~knob;
 	else
-		flags |= PF_AUTOBOOT;
-	
-	if (*temp++ != ' ')
-		goto parse_error;
-	
-	c = *temp++ - '0';
-	if ((c != 0) && (c != 1))
-		goto parse_error;
-	if (c == 0)
-		flags &= ~PF_AUTOSEARCH;
-	else
-		flags |= PF_AUTOSEARCH;
+		flags |= knob;
 	
 	DPRINTK("%s: flags after: 0x%X\n", __func__, flags);
 		
 	/* So far so good, let's get in deep */
+	write_lock(&pathentry->rw_lock);
 	
 	/* Change the path entry flags first */
 	pathentry->devpath.flags = flags;
 		
 	/* Now, dive in. Write back to the hardware */
-	WARN_ON(pdcspath_store(pathentry));	/* this warn should *NEVER* happen */
+	pdcspath_store(pathentry);
+	write_unlock(&pathentry->rw_lock);
 	
-	printk(KERN_INFO "PDC Stable Storage: changed flags to \"%s\"\n", buf);
+	printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" to \"%s\"\n",
+		(knob & PF_AUTOBOOT) ? "autoboot" : "autosearch",
+		(flags & knob) ? "On" : "Off");
 	
 	return count;
 
 parse_error:
-	printk(KERN_WARNING "%s: Parse error: expect \"n n\" (n == 0 or 1) for AB and AS\n", __func__);
+	printk(KERN_WARNING "%s: Parse error: expect \"n\" (n == 0 or 1)\n", __func__);
 	return -EINVAL;
 }
 
-/* The last attribute (the 'root' one actually) with all remaining data. */
-static PDCS_ATTR(info, 0600, pdcs_info_read, pdcs_info_write);
+/**
+ * pdcs_autoboot_write - This function handles autoboot flag modifying.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The input buffer to read from.
+ * @count: The number of bytes to be read.
+ *
+ * We will call this function to change the current boot flags.
+ * We expect a precise syntax:
+ *	\"n\" (n == 0 or 1) to toggle AutoSearch Off or On
+ */
+static inline ssize_t
+pdcs_autoboot_write(struct subsystem *entry, const char *buf, size_t count)
+{
+	return pdcs_auto_write(entry, buf, count, PF_AUTOBOOT);
+}
+
+/**
+ * pdcs_autosearch_write - This function handles autosearch flag modifying.
+ * @entry: An allocated and populated subsytem struct. We don't use it tho.
+ * @buf: The input buffer to read from.
+ * @count: The number of bytes to be read.
+ *
+ * We will call this function to change the current boot flags.
+ * We expect a precise syntax:
+ *	\"n\" (n == 0 or 1) to toggle AutoSearch Off or On
+ */
+static inline ssize_t
+pdcs_autosearch_write(struct subsystem *entry, const char *buf, size_t count)
+{
+	return pdcs_auto_write(entry, buf, count, PF_AUTOSEARCH);
+}
+
+/* The remaining attributes. */
+static PDCS_ATTR(size, 0444, pdcs_size_read, NULL);
+static PDCS_ATTR(autoboot, 0644, pdcs_autoboot_read, pdcs_autoboot_write);
+static PDCS_ATTR(autosearch, 0644, pdcs_autosearch_read, pdcs_autosearch_write);
+static PDCS_ATTR(timer, 0444, pdcs_timer_read, NULL);
+static PDCS_ATTR(osid, 0400, pdcs_osid_read, NULL);
+static PDCS_ATTR(fastsize, 0400, pdcs_fastsize_read, NULL);
 
 static struct subsys_attribute *pdcs_subsys_attrs[] = {
-	&pdcs_attr_info,
-	NULL,	/* maybe more in the future? */
+	&pdcs_attr_size,
+	&pdcs_attr_autoboot,
+	&pdcs_attr_autosearch,
+	&pdcs_attr_timer,
+	&pdcs_attr_osid,
+	&pdcs_attr_fastsize,
+	NULL,
 };
 
 static decl_subsys(paths, &ktype_pdcspath, NULL);
-static decl_subsys(pdc, NULL, NULL);
+static decl_subsys(stable, NULL, NULL);
 
 /**
  * pdcs_register_pathentries - Prepares path entries kobjects for sysfs usage.
@@ -656,8 +808,16 @@ pdcs_register_pathentries(void)
 	struct pdcspath_entry *entry;
 	int err;
 	
+	/* Initialize the entries rw_lock before anything else */
+	for (i = 0; (entry = pdcspath_entries[i]); i++)
+		rwlock_init(&entry->rw_lock);
+
 	for (i = 0; (entry = pdcspath_entries[i]); i++) {
-		if (pdcspath_fetch(entry) < 0)
+		write_lock(&entry->rw_lock);
+		err = pdcspath_fetch(entry);
+		write_unlock(&entry->rw_lock);
+
+		if (err < 0)
 			continue;
 
 		if ((err = kobject_set_name(&entry->kobj, "%s", entry->name)))
@@ -667,13 +827,14 @@ pdcs_register_pathentries(void)
 			return err;
 		
 		/* kobject is now registered */
+		write_lock(&entry->rw_lock);
 		entry->ready = 2;
 		
-		if (!entry->dev)
-			continue;
-
 		/* Add a nice symlink to the real device */
-		sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+		if (entry->dev)
+			sysfs_create_link(&entry->kobj, &entry->dev->kobj, "device");
+
+		write_unlock(&entry->rw_lock);
 	}
 	
 	return 0;
@@ -688,14 +849,17 @@ pdcs_unregister_pathentries(void)
 	unsigned short i;
 	struct pdcspath_entry *entry;
 	
-	for (i = 0; (entry = pdcspath_entries[i]); i++)
+	for (i = 0; (entry = pdcspath_entries[i]); i++) {
+		read_lock(&entry->rw_lock);
 		if (entry->ready >= 2)
-			kobject_unregister(&entry->kobj);	
+			kobject_unregister(&entry->kobj);
+		read_unlock(&entry->rw_lock);
+	}
 }
 
 /*
- * For now we register the pdc subsystem with the firmware subsystem
- * and the paths subsystem with the pdc subsystem
+ * For now we register the stable subsystem with the firmware subsystem
+ * and the paths subsystem with the stable subsystem
  */
 static int __init
 pdc_stable_init(void)
@@ -707,19 +871,23 @@ pdc_stable_init(void)
 	if (pdc_stable_get_size(&pdcs_size) != PDC_OK) 
 		return -ENODEV;
 
-	printk(KERN_INFO "PDC Stable Storage facility v%s\n", PDCS_VERSION);
+	/* make sure we have enough data */
+	if (pdcs_size < 96)
+		return -ENODATA;
+
+	printk(KERN_INFO PDCS_PREFIX " facility v%s\n", PDCS_VERSION);
 
-	/* For now we'll register the pdc subsys within this driver */
-	if ((rc = firmware_register(&pdc_subsys)))
+	/* For now we'll register the stable subsys within this driver */
+	if ((rc = firmware_register(&stable_subsys)))
 		goto fail_firmreg;
 
-	/* Don't forget the info entry */
+	/* Don't forget the root entries */
 	for (i = 0; (attr = pdcs_subsys_attrs[i]) && !error; i++)
 		if (attr->show)
-			error = subsys_create_file(&pdc_subsys, attr);
+			error = subsys_create_file(&stable_subsys, attr);
 	
-	/* register the paths subsys as a subsystem of pdc subsys */
-	kset_set_kset_s(&paths_subsys, pdc_subsys);
+	/* register the paths subsys as a subsystem of stable subsys */
+	kset_set_kset_s(&paths_subsys, stable_subsys);
 	if ((rc= subsystem_register(&paths_subsys)))
 		goto fail_subsysreg;
 
@@ -734,10 +902,10 @@ fail_pdcsreg:
 	subsystem_unregister(&paths_subsys);
 	
 fail_subsysreg:
-	firmware_unregister(&pdc_subsys);
+	firmware_unregister(&stable_subsys);
 	
 fail_firmreg:
-	printk(KERN_INFO "PDC Stable Storage bailing out\n");
+	printk(KERN_INFO PDCS_PREFIX " bailing out\n");
 	return rc;
 }
 
@@ -747,7 +915,7 @@ pdc_stable_exit(void)
 	pdcs_unregister_pathentries();
 	subsystem_unregister(&paths_subsys);
 
-	firmware_unregister(&pdc_subsys);
+	firmware_unregister(&stable_subsys);
 }
 
 
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index c85653f315aa..52f265e97729 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -2064,14 +2064,13 @@ sba_driver_callback(struct parisc_device *dev)
 	printk(KERN_INFO "%s found %s at 0x%lx\n",
 		MODULE_NAME, version, dev->hpa.start);
 
-	sba_dev = kmalloc(sizeof(struct sba_device), GFP_KERNEL);
+	sba_dev = kzalloc(sizeof(struct sba_device), GFP_KERNEL);
 	if (!sba_dev) {
 		printk(KERN_ERR MODULE_NAME " - couldn't alloc sba_device\n");
 		return -ENOMEM;
 	}
 
 	parisc_set_drvdata(dev, sba_dev);
-	memset(sba_dev, 0, sizeof(struct sba_device));
 
 	for(i=0; i<MAX_IOC; i++)
 		spin_lock_init(&(sba_dev->ioc[i].res_lock));
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index d14888e149bb..ba971fecd0d8 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -89,6 +89,9 @@ static struct superio_device sio_dev;
 #define DBG_INIT(x...)
 #endif
 
+#define SUPERIO	"SuperIO"
+#define PFX	SUPERIO ": "
+
 static irqreturn_t
 superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
 {
@@ -117,7 +120,7 @@ superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
 	local_irq = results & 0x0f;
 
 	if (local_irq == 2 || local_irq > 7) {
-		printk(KERN_ERR "SuperIO: slave interrupted!\n");
+		printk(KERN_ERR PFX "slave interrupted!\n");
 		return IRQ_HANDLED;
 	}
 
@@ -128,7 +131,7 @@ superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
 		outb(OCW3_ISR,IC_PIC1+0);
 		results = inb(IC_PIC1+0);
 		if ((results & 0x80) == 0) { /* if ISR7 not set: spurious */
-			printk(KERN_WARNING "SuperIO: spurious interrupt!\n");
+			printk(KERN_WARNING PFX "spurious interrupt!\n");
 			return IRQ_HANDLED;
 		}
 	}
@@ -163,27 +166,27 @@ superio_init(struct pci_dev *pcidev)
 	/* ...then properly fixup the USB to point at suckyio PIC */
 	sio->usb_pdev->irq = superio_fixup_irq(sio->usb_pdev);
 
-	printk(KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
+	printk(KERN_INFO PFX "Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
 	       pci_name(pdev), pdev->irq);
 
 	pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base);
 	sio->sp1_base &= ~1;
-	printk (KERN_INFO "SuperIO: Serial port 1 at 0x%x\n", sio->sp1_base);
+	printk(KERN_INFO PFX "Serial port 1 at 0x%x\n", sio->sp1_base);
 
 	pci_read_config_dword (pdev, SIO_SP2BAR, &sio->sp2_base);
 	sio->sp2_base &= ~1;
-	printk (KERN_INFO "SuperIO: Serial port 2 at 0x%x\n", sio->sp2_base);
+	printk(KERN_INFO PFX "Serial port 2 at 0x%x\n", sio->sp2_base);
 
 	pci_read_config_dword (pdev, SIO_PPBAR, &sio->pp_base);
 	sio->pp_base &= ~1;
-	printk (KERN_INFO "SuperIO: Parallel port at 0x%x\n", sio->pp_base);
+	printk(KERN_INFO PFX "Parallel port at 0x%x\n", sio->pp_base);
 
 	pci_read_config_dword (pdev, SIO_FDCBAR, &sio->fdc_base);
 	sio->fdc_base &= ~1;
-	printk (KERN_INFO "SuperIO: Floppy controller at 0x%x\n", sio->fdc_base);
+	printk(KERN_INFO PFX "Floppy controller at 0x%x\n", sio->fdc_base);
 	pci_read_config_dword (pdev, SIO_ACPIBAR, &sio->acpi_base);
 	sio->acpi_base &= ~1;
-	printk (KERN_INFO "SuperIO: ACPI at 0x%x\n", sio->acpi_base);
+	printk(KERN_INFO PFX "ACPI at 0x%x\n", sio->acpi_base);
 
 	request_region (IC_PIC1, 0x1f, "pic1");
 	request_region (IC_PIC2, 0x1f, "pic2");
@@ -263,14 +266,14 @@ superio_init(struct pci_dev *pcidev)
 	/* Setup USB power regulation */
 	outb(1, sio->acpi_base + USB_REG_CR);
 	if (inb(sio->acpi_base + USB_REG_CR) & 1)
-		printk(KERN_INFO "SuperIO: USB regulator enabled\n");
+		printk(KERN_INFO PFX "USB regulator enabled\n");
 	else
-		printk(KERN_ERR "USB regulator not initialized!\n");
+		printk(KERN_ERR PFX "USB regulator not initialized!\n");
 
 	if (request_irq(pdev->irq, superio_interrupt, SA_INTERRUPT,
-			"SuperIO", (void *)sio)) {
+			SUPERIO, (void *)sio)) {
 
-		printk(KERN_ERR "SuperIO: could not get irq\n");
+		printk(KERN_ERR PFX "could not get irq\n");
 		BUG();
 		return;
 	}
@@ -284,7 +287,7 @@ static void superio_disable_irq(unsigned int irq)
 	u8 r8;
 
 	if ((irq < 1) || (irq == 2) || (irq > 7)) {
-		printk(KERN_ERR "SuperIO: Illegal irq number.\n");
+		printk(KERN_ERR PFX "Illegal irq number.\n");
 		BUG();
 		return;
 	}
@@ -301,7 +304,7 @@ static void superio_enable_irq(unsigned int irq)
 	u8 r8;
 
 	if ((irq < 1) || (irq == 2) || (irq > 7)) {
-		printk(KERN_ERR "SuperIO: Illegal irq number (%d).\n", irq);
+		printk(KERN_ERR PFX "Illegal irq number (%d).\n", irq);
 		BUG();
 		return;
 	}
@@ -319,7 +322,7 @@ static unsigned int superio_startup_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type superio_interrupt_type = {
-	.typename =	"SuperIO",
+	.typename =	SUPERIO,
 	.startup =	superio_startup_irq,
 	.shutdown =	superio_disable_irq,
 	.enable =	superio_enable_irq,
@@ -413,7 +416,7 @@ static void __devinit superio_serial_init(void)
 
 	retval = early_serial_setup(&serial[0]);
 	if (retval < 0) {
-		printk(KERN_WARNING "SuperIO: Register Serial #0 failed.\n");
+		printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
 		return;
 	}
 
@@ -423,7 +426,7 @@ static void __devinit superio_serial_init(void)
 	retval = early_serial_setup(&serial[1]);
 
 	if (retval < 0)
-		printk(KERN_WARNING "SuperIO: Register Serial #1 failed.\n");
+		printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
 #endif /* CONFIG_SERIAL_8250 */
 }
 
@@ -437,7 +440,7 @@ static void __devinit superio_parport_init(void)
 			PARPORT_DMA_NONE /* dma */,
 			NULL /*struct pci_dev* */) )
 
-		printk(KERN_WARNING "SuperIO: Probing parallel port failed.\n");
+		printk(KERN_WARNING PFX "Probing parallel port failed.\n");
 #endif	/* CONFIG_PARPORT_PC */
 }
 
@@ -499,7 +502,7 @@ static struct pci_device_id superio_tbl[] = {
 };
 
 static struct pci_driver superio_driver = {
-	.name =         "SuperIO",
+	.name =         SUPERIO,
 	.id_table =     superio_tbl,
 	.probe =        superio_probe,
 };
diff --git a/drivers/parisc/wax.c b/drivers/parisc/wax.c
index 17dce2adf7fe..813c2c24ab1e 100644
--- a/drivers/parisc/wax.c
+++ b/drivers/parisc/wax.c
@@ -76,7 +76,7 @@ wax_init_chip(struct parisc_device *dev)
 	struct gsc_irq gsc_irq;
 	int ret;
 
-	wax = kmalloc(sizeof(*wax), GFP_KERNEL);
+	wax = kzalloc(sizeof(*wax), GFP_KERNEL);
 	if (!wax)
 		return -ENOMEM;
 
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index f605dea57224..f63c387976cf 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -90,6 +90,15 @@ config PARPORT_ARC
 	depends on ARM && PARPORT
 	select PARPORT_NOT_PC
 
+config PARPORT_IP32
+	tristate "SGI IP32 builtin port (EXPERIMENTAL)"
+	depends on SGI_IP32 && PARPORT && EXPERIMENTAL
+	select PARPORT_NOT_PC
+	help
+	  Say Y here if you need support for the parallel port on
+	  SGI O2 machines. This code is also available as a module (say M),
+	  called parport_ip32.  If in doubt, saying N is the safe plan.
+
 config PARPORT_AMIGA
 	tristate "Amiga builtin port"
 	depends on AMIGA && PARPORT
diff --git a/drivers/parport/Makefile b/drivers/parport/Makefile
index 5372212bb9d9..a19de35f8de2 100644
--- a/drivers/parport/Makefile
+++ b/drivers/parport/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_PARPORT_MFC3)	+= parport_mfc3.o
 obj-$(CONFIG_PARPORT_ATARI)	+= parport_atari.o
 obj-$(CONFIG_PARPORT_SUNBPP)	+= parport_sunbpp.o
 obj-$(CONFIG_PARPORT_GSC)	+= parport_gsc.o
+obj-$(CONFIG_PARPORT_IP32)	+= parport_ip32.o
diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
index 5b887ba5aaf9..690b239ad3a7 100644
--- a/drivers/parport/ieee1284.c
+++ b/drivers/parport/ieee1284.c
@@ -61,10 +61,10 @@ static void timeout_waiting_on_port (unsigned long cookie)
  *	set to zero, it returns immediately.
  *
  *	If an interrupt occurs before the timeout period elapses, this
- *	function returns one immediately.  If it times out, it returns
- *	a value greater than zero.  An error code less than zero
- *	indicates an error (most likely a pending signal), and the
- *	calling code should finish what it's doing as soon as it can.
+ *	function returns zero immediately.  If it times out, it returns
+ *	one.  An error code less than zero indicates an error (most
+ *	likely a pending signal), and the calling code should finish
+ *	what it's doing as soon as it can.
  */
 
 int parport_wait_event (struct parport *port, signed long timeout)
@@ -110,7 +110,7 @@ int parport_wait_event (struct parport *port, signed long timeout)
  *
  *	If the status lines take on the desired values before the
  *	timeout period elapses, parport_poll_peripheral() returns zero
- *	immediately.  A zero return value greater than zero indicates
+ *	immediately.  A return value greater than zero indicates
  *	a timeout.  An error code (less than zero) indicates an error,
  *	most likely a signal that arrived, and the caller should
  *	finish what it is doing as soon as possible.
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index fde29a75f888..1de52d9febf9 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -249,7 +249,7 @@ struct parport *__devinit parport_gsc_probe_port (unsigned long base,
 	struct parport tmp;
 	struct parport *p = &tmp;
 
-	priv = kmalloc (sizeof (struct parport_gsc_private), GFP_KERNEL);
+	priv = kzalloc (sizeof (struct parport_gsc_private), GFP_KERNEL);
 	if (!priv) {
 		printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
 		return NULL;
diff --git a/drivers/parport/parport_ip32.c b/drivers/parport/parport_ip32.c
new file mode 100644
index 000000000000..46e06e596d73
--- /dev/null
+++ b/drivers/parport/parport_ip32.c
@@ -0,0 +1,2253 @@
+/* Low-level parallel port routines for built-in port on SGI IP32
+ *
+ * Author: Arnaud Giersch <arnaud.giersch@free.fr>
+ *
+ * Based on parport_pc.c by
+ *	Phil Blundell, Tim Waugh, Jose Renau, David Campbell,
+ *	Andrea Arcangeli, et al.
+ *
+ * Thanks to Ilya A. Volynets-Evenbakh for his help.
+ *
+ * Copyright (C) 2005, 2006 Arnaud Giersch.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* Current status:
+ *
+ *	Basic SPP and PS2 modes are supported.
+ *	Support for parallel port IRQ is present.
+ *	Hardware SPP (a.k.a. compatibility), EPP, and ECP modes are
+ *	supported.
+ *	SPP/ECP FIFO can be driven in PIO or DMA mode.  PIO mode can work with
+ *	or without interrupt support.
+ *
+ *	Hardware ECP mode is not fully implemented (ecp_read_data and
+ *	ecp_write_addr are actually missing).
+ *
+ * To do:
+ *
+ *	Fully implement ECP mode.
+ *	EPP and ECP mode need to be tested.  I currently do not own any
+ *	peripheral supporting these extended mode, and cannot test them.
+ *	If DMA mode works well, decide if support for PIO FIFO modes should be
+ *	dropped.
+ *	Use the io{read,write} family functions when they become available in
+ *	the linux-mips.org tree.  Note: the MIPS specific functions readsb()
+ *	and writesb() are to be translated by ioread8_rep() and iowrite8_rep()
+ *	respectively.
+ */
+
+/* The built-in parallel port on the SGI 02 workstation (a.k.a. IP32) is an
+ * IEEE 1284 parallel port driven by a Texas Instrument TL16PIR552PH chip[1].
+ * This chip supports SPP, bidirectional, EPP and ECP modes.  It has a 16 byte
+ * FIFO buffer and supports DMA transfers.
+ *
+ * [1] http://focus.ti.com/docs/prod/folders/print/tl16pir552.html
+ *
+ * Theoretically, we could simply use the parport_pc module.  It is however
+ * not so simple.  The parport_pc code assumes that the parallel port
+ * registers are port-mapped.  On the O2, they are memory-mapped.
+ * Furthermore, each register is replicated on 256 consecutive addresses (as
+ * it is for the built-in serial ports on the same chip).
+ */
+
+/*--- Some configuration defines ---------------------------------------*/
+
+/* DEBUG_PARPORT_IP32
+ *	0	disable debug
+ *	1	standard level: pr_debug1 is enabled
+ *	2	parport_ip32_dump_state is enabled
+ *	>=3	verbose level: pr_debug is enabled
+ */
+#if !defined(DEBUG_PARPORT_IP32)
+#	define DEBUG_PARPORT_IP32  0	/* 0 (disabled) for production */
+#endif
+
+/*----------------------------------------------------------------------*/
+
+/* Setup DEBUG macros.  This is done before any includes, just in case we
+ * activate pr_debug() with DEBUG_PARPORT_IP32 >= 3.
+ */
+#if DEBUG_PARPORT_IP32 == 1
+#	warning DEBUG_PARPORT_IP32 == 1
+#elif DEBUG_PARPORT_IP32 == 2
+#	warning DEBUG_PARPORT_IP32 == 2
+#elif DEBUG_PARPORT_IP32 >= 3
+#	warning DEBUG_PARPORT_IP32 >= 3
+#	if !defined(DEBUG)
+#		define DEBUG /* enable pr_debug() in kernel.h */
+#	endif
+#endif
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/ip32/ip32_ints.h>
+#include <asm/ip32/mace.h>
+
+/*--- Global variables -------------------------------------------------*/
+
+/* Verbose probing on by default for debugging. */
+#if DEBUG_PARPORT_IP32 >= 1
+#	define DEFAULT_VERBOSE_PROBING	1
+#else
+#	define DEFAULT_VERBOSE_PROBING	0
+#endif
+
+/* Default prefix for printk */
+#define PPIP32 "parport_ip32: "
+
+/*
+ * These are the module parameters:
+ * @features:		bit mask of features to enable/disable
+ *			(all enabled by default)
+ * @verbose_probing:	log chit-chat during initialization
+ */
+#define PARPORT_IP32_ENABLE_IRQ	(1U << 0)
+#define PARPORT_IP32_ENABLE_DMA	(1U << 1)
+#define PARPORT_IP32_ENABLE_SPP	(1U << 2)
+#define PARPORT_IP32_ENABLE_EPP	(1U << 3)
+#define PARPORT_IP32_ENABLE_ECP	(1U << 4)
+static unsigned int features =	~0U;
+static int verbose_probing =	DEFAULT_VERBOSE_PROBING;
+
+/* We do not support more than one port. */
+static struct parport *this_port = NULL;
+
+/* Timing constants for FIFO modes.  */
+#define FIFO_NFAULT_TIMEOUT	100	/* milliseconds */
+#define FIFO_POLLING_INTERVAL	50	/* microseconds */
+
+/*--- I/O register definitions -----------------------------------------*/
+
+/**
+ * struct parport_ip32_regs - virtual addresses of parallel port registers
+ * @data:	Data Register
+ * @dsr:	Device Status Register
+ * @dcr:	Device Control Register
+ * @eppAddr:	EPP Address Register
+ * @eppData0:	EPP Data Register 0
+ * @eppData1:	EPP Data Register 1
+ * @eppData2:	EPP Data Register 2
+ * @eppData3:	EPP Data Register 3
+ * @ecpAFifo:	ECP Address FIFO
+ * @fifo:	General FIFO register.  The same address is used for:
+ *		- cFifo, the Parallel Port DATA FIFO
+ *		- ecpDFifo, the ECP Data FIFO
+ *		- tFifo, the ECP Test FIFO
+ * @cnfgA:	Configuration Register A
+ * @cnfgB:	Configuration Register B
+ * @ecr:	Extended Control Register
+ */
+struct parport_ip32_regs {
+	void __iomem *data;
+	void __iomem *dsr;
+	void __iomem *dcr;
+	void __iomem *eppAddr;
+	void __iomem *eppData0;
+	void __iomem *eppData1;
+	void __iomem *eppData2;
+	void __iomem *eppData3;
+	void __iomem *ecpAFifo;
+	void __iomem *fifo;
+	void __iomem *cnfgA;
+	void __iomem *cnfgB;
+	void __iomem *ecr;
+};
+
+/* Device Status Register */
+#define DSR_nBUSY		(1U << 7)	/* PARPORT_STATUS_BUSY */
+#define DSR_nACK		(1U << 6)	/* PARPORT_STATUS_ACK */
+#define DSR_PERROR		(1U << 5)	/* PARPORT_STATUS_PAPEROUT */
+#define DSR_SELECT		(1U << 4)	/* PARPORT_STATUS_SELECT */
+#define DSR_nFAULT		(1U << 3)	/* PARPORT_STATUS_ERROR */
+#define DSR_nPRINT		(1U << 2)	/* specific to TL16PIR552 */
+/* #define DSR_reserved		(1U << 1) */
+#define DSR_TIMEOUT		(1U << 0)	/* EPP timeout */
+
+/* Device Control Register */
+/* #define DCR_reserved		(1U << 7) | (1U <<  6) */
+#define DCR_DIR			(1U << 5)	/* direction */
+#define DCR_IRQ			(1U << 4)	/* interrupt on nAck */
+#define DCR_SELECT		(1U << 3)	/* PARPORT_CONTROL_SELECT */
+#define DCR_nINIT		(1U << 2)	/* PARPORT_CONTROL_INIT */
+#define DCR_AUTOFD		(1U << 1)	/* PARPORT_CONTROL_AUTOFD */
+#define DCR_STROBE		(1U << 0)	/* PARPORT_CONTROL_STROBE */
+
+/* ECP Configuration Register A */
+#define CNFGA_IRQ		(1U << 7)
+#define CNFGA_ID_MASK		((1U << 6) | (1U << 5) | (1U << 4))
+#define CNFGA_ID_SHIFT		4
+#define CNFGA_ID_16		(00U << CNFGA_ID_SHIFT)
+#define CNFGA_ID_8		(01U << CNFGA_ID_SHIFT)
+#define CNFGA_ID_32		(02U << CNFGA_ID_SHIFT)
+/* #define CNFGA_reserved	(1U << 3) */
+#define CNFGA_nBYTEINTRANS	(1U << 2)
+#define CNFGA_PWORDLEFT		((1U << 1) | (1U << 0))
+
+/* ECP Configuration Register B */
+#define CNFGB_COMPRESS		(1U << 7)
+#define CNFGB_INTRVAL		(1U << 6)
+#define CNFGB_IRQ_MASK		((1U << 5) | (1U << 4) | (1U << 3))
+#define CNFGB_IRQ_SHIFT		3
+#define CNFGB_DMA_MASK		((1U << 2) | (1U << 1) | (1U << 0))
+#define CNFGB_DMA_SHIFT		0
+
+/* Extended Control Register */
+#define ECR_MODE_MASK		((1U << 7) | (1U << 6) | (1U << 5))
+#define ECR_MODE_SHIFT		5
+#define ECR_MODE_SPP		(00U << ECR_MODE_SHIFT)
+#define ECR_MODE_PS2		(01U << ECR_MODE_SHIFT)
+#define ECR_MODE_PPF		(02U << ECR_MODE_SHIFT)
+#define ECR_MODE_ECP		(03U << ECR_MODE_SHIFT)
+#define ECR_MODE_EPP		(04U << ECR_MODE_SHIFT)
+/* #define ECR_MODE_reserved	(05U << ECR_MODE_SHIFT) */
+#define ECR_MODE_TST		(06U << ECR_MODE_SHIFT)
+#define ECR_MODE_CFG		(07U << ECR_MODE_SHIFT)
+#define ECR_nERRINTR		(1U << 4)
+#define ECR_DMAEN		(1U << 3)
+#define ECR_SERVINTR		(1U << 2)
+#define ECR_F_FULL		(1U << 1)
+#define ECR_F_EMPTY		(1U << 0)
+
+/*--- Private data -----------------------------------------------------*/
+
+/**
+ * enum parport_ip32_irq_mode - operation mode of interrupt handler
+ * @PARPORT_IP32_IRQ_FWD:	forward interrupt to the upper parport layer
+ * @PARPORT_IP32_IRQ_HERE:	interrupt is handled locally
+ */
+enum parport_ip32_irq_mode { PARPORT_IP32_IRQ_FWD, PARPORT_IP32_IRQ_HERE };
+
+/**
+ * struct parport_ip32_private - private stuff for &struct parport
+ * @regs:		register addresses
+ * @dcr_cache:		cached contents of DCR
+ * @dcr_writable:	bit mask of writable DCR bits
+ * @pword:		number of bytes per PWord
+ * @fifo_depth:		number of PWords that FIFO will hold
+ * @readIntrThreshold:	minimum number of PWords we can read
+ *			if we get an interrupt
+ * @writeIntrThreshold:	minimum number of PWords we can write
+ *			if we get an interrupt
+ * @irq_mode:		operation mode of interrupt handler for this port
+ * @irq_complete:	mutex used to wait for an interrupt to occur
+ */
+struct parport_ip32_private {
+	struct parport_ip32_regs	regs;
+	unsigned int			dcr_cache;
+	unsigned int			dcr_writable;
+	unsigned int			pword;
+	unsigned int			fifo_depth;
+	unsigned int			readIntrThreshold;
+	unsigned int			writeIntrThreshold;
+	enum parport_ip32_irq_mode	irq_mode;
+	struct completion		irq_complete;
+};
+
+/*--- Debug code -------------------------------------------------------*/
+
+/*
+ * pr_debug1 - print debug messages
+ *
+ * This is like pr_debug(), but is defined for %DEBUG_PARPORT_IP32 >= 1
+ */
+#if DEBUG_PARPORT_IP32 >= 1
+#	define pr_debug1(...)	printk(KERN_DEBUG __VA_ARGS__)
+#else /* DEBUG_PARPORT_IP32 < 1 */
+#	define pr_debug1(...)	do { } while (0)
+#endif
+
+/*
+ * pr_trace, pr_trace1 - trace function calls
+ * @p:		pointer to &struct parport
+ * @fmt:	printk format string
+ * @...:	parameters for format string
+ *
+ * Macros used to trace function calls.  The given string is formatted after
+ * function name.  pr_trace() uses pr_debug(), and pr_trace1() uses
+ * pr_debug1().  __pr_trace() is the low-level macro and is not to be used
+ * directly.
+ */
+#define __pr_trace(pr, p, fmt, ...)					\
+	pr("%s: %s" fmt "\n",						\
+	   ({ const struct parport *__p = (p);				\
+		   __p ? __p->name : "parport_ip32"; }),		\
+	   __func__ , ##__VA_ARGS__)
+#define pr_trace(p, fmt, ...)	__pr_trace(pr_debug, p, fmt , ##__VA_ARGS__)
+#define pr_trace1(p, fmt, ...)	__pr_trace(pr_debug1, p, fmt , ##__VA_ARGS__)
+
+/*
+ * __pr_probe, pr_probe - print message if @verbose_probing is true
+ * @p:		pointer to &struct parport
+ * @fmt:	printk format string
+ * @...:	parameters for format string
+ *
+ * For new lines, use pr_probe().  Use __pr_probe() for continued lines.
+ */
+#define __pr_probe(...)							\
+	do { if (verbose_probing) printk(__VA_ARGS__); } while (0)
+#define pr_probe(p, fmt, ...)						\
+	__pr_probe(KERN_INFO PPIP32 "0x%lx: " fmt, (p)->base , ##__VA_ARGS__)
+
+/*
+ * parport_ip32_dump_state - print register status of parport
+ * @p:		pointer to &struct parport
+ * @str:	string to add in message
+ * @show_ecp_config:	shall we dump ECP configuration registers too?
+ *
+ * This function is only here for debugging purpose, and should be used with
+ * care.  Reading the parallel port registers may have undesired side effects.
+ * Especially if @show_ecp_config is true, the parallel port is resetted.
+ * This function is only defined if %DEBUG_PARPORT_IP32 >= 2.
+ */
+#if DEBUG_PARPORT_IP32 >= 2
+static void parport_ip32_dump_state(struct parport *p, char *str,
+				    unsigned int show_ecp_config)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	unsigned int i;
+
+	printk(KERN_DEBUG PPIP32 "%s: state (%s):\n", p->name, str);
+	{
+		static const char ecr_modes[8][4] = {"SPP", "PS2", "PPF",
+						     "ECP", "EPP", "???",
+						     "TST", "CFG"};
+		unsigned int ecr = readb(priv->regs.ecr);
+		printk(KERN_DEBUG PPIP32 "    ecr=0x%02x", ecr);
+		printk(" %s",
+		       ecr_modes[(ecr & ECR_MODE_MASK) >> ECR_MODE_SHIFT]);
+		if (ecr & ECR_nERRINTR)
+			printk(",nErrIntrEn");
+		if (ecr & ECR_DMAEN)
+			printk(",dmaEn");
+		if (ecr & ECR_SERVINTR)
+			printk(",serviceIntr");
+		if (ecr & ECR_F_FULL)
+			printk(",f_full");
+		if (ecr & ECR_F_EMPTY)
+			printk(",f_empty");
+		printk("\n");
+	}
+	if (show_ecp_config) {
+		unsigned int oecr, cnfgA, cnfgB;
+		oecr = readb(priv->regs.ecr);
+		writeb(ECR_MODE_PS2, priv->regs.ecr);
+		writeb(ECR_MODE_CFG, priv->regs.ecr);
+		cnfgA = readb(priv->regs.cnfgA);
+		cnfgB = readb(priv->regs.cnfgB);
+		writeb(ECR_MODE_PS2, priv->regs.ecr);
+		writeb(oecr, priv->regs.ecr);
+		printk(KERN_DEBUG PPIP32 "    cnfgA=0x%02x", cnfgA);
+		printk(" ISA-%s", (cnfgA & CNFGA_IRQ) ? "Level" : "Pulses");
+		switch (cnfgA & CNFGA_ID_MASK) {
+		case CNFGA_ID_8:
+			printk(",8 bits");
+			break;
+		case CNFGA_ID_16:
+			printk(",16 bits");
+			break;
+		case CNFGA_ID_32:
+			printk(",32 bits");
+			break;
+		default:
+			printk(",unknown ID");
+			break;
+		}
+		if (!(cnfgA & CNFGA_nBYTEINTRANS))
+			printk(",ByteInTrans");
+		if ((cnfgA & CNFGA_ID_MASK) != CNFGA_ID_8)
+			printk(",%d byte%s left", cnfgA & CNFGA_PWORDLEFT,
+			       ((cnfgA & CNFGA_PWORDLEFT) > 1) ? "s" : "");
+		printk("\n");
+		printk(KERN_DEBUG PPIP32 "    cnfgB=0x%02x", cnfgB);
+		printk(" irq=%u,dma=%u",
+		       (cnfgB & CNFGB_IRQ_MASK) >> CNFGB_IRQ_SHIFT,
+		       (cnfgB & CNFGB_DMA_MASK) >> CNFGB_DMA_SHIFT);
+		printk(",intrValue=%d", !!(cnfgB & CNFGB_INTRVAL));
+		if (cnfgB & CNFGB_COMPRESS)
+			printk(",compress");
+		printk("\n");
+	}
+	for (i = 0; i < 2; i++) {
+		unsigned int dcr = i ? priv->dcr_cache : readb(priv->regs.dcr);
+		printk(KERN_DEBUG PPIP32 "    dcr(%s)=0x%02x",
+		       i ? "soft" : "hard", dcr);
+		printk(" %s", (dcr & DCR_DIR) ? "rev" : "fwd");
+		if (dcr & DCR_IRQ)
+			printk(",ackIntEn");
+		if (!(dcr & DCR_SELECT))
+			printk(",nSelectIn");
+		if (dcr & DCR_nINIT)
+			printk(",nInit");
+		if (!(dcr & DCR_AUTOFD))
+			printk(",nAutoFD");
+		if (!(dcr & DCR_STROBE))
+			printk(",nStrobe");
+		printk("\n");
+	}
+#define sep (f++ ? ',' : ' ')
+	{
+		unsigned int f = 0;
+		unsigned int dsr = readb(priv->regs.dsr);
+		printk(KERN_DEBUG PPIP32 "    dsr=0x%02x", dsr);
+		if (!(dsr & DSR_nBUSY))
+			printk("%cBusy", sep);
+		if (dsr & DSR_nACK)
+			printk("%cnAck", sep);
+		if (dsr & DSR_PERROR)
+			printk("%cPError", sep);
+		if (dsr & DSR_SELECT)
+			printk("%cSelect", sep);
+		if (dsr & DSR_nFAULT)
+			printk("%cnFault", sep);
+		if (!(dsr & DSR_nPRINT))
+			printk("%c(Print)", sep);
+		if (dsr & DSR_TIMEOUT)
+			printk("%cTimeout", sep);
+		printk("\n");
+	}
+#undef sep
+}
+#else /* DEBUG_PARPORT_IP32 < 2 */
+#define parport_ip32_dump_state(...)	do { } while (0)
+#endif
+
+/*
+ * CHECK_EXTRA_BITS - track and log extra bits
+ * @p:		pointer to &struct parport
+ * @b:		byte to inspect
+ * @m:		bit mask of authorized bits
+ *
+ * This is used to track and log extra bits that should not be there in
+ * parport_ip32_write_control() and parport_ip32_frob_control().  It is only
+ * defined if %DEBUG_PARPORT_IP32 >= 1.
+ */
+#if DEBUG_PARPORT_IP32 >= 1
+#define CHECK_EXTRA_BITS(p, b, m)					\
+	do {								\
+		unsigned int __b = (b), __m = (m);			\
+		if (__b & ~__m)						\
+			pr_debug1(PPIP32 "%s: extra bits in %s(%s): "	\
+				  "0x%02x/0x%02x\n",			\
+				  (p)->name, __func__, #b, __b, __m);	\
+	} while (0)
+#else /* DEBUG_PARPORT_IP32 < 1 */
+#define CHECK_EXTRA_BITS(...)	do { } while (0)
+#endif
+
+/*--- IP32 parallel port DMA operations --------------------------------*/
+
+/**
+ * struct parport_ip32_dma_data - private data needed for DMA operation
+ * @dir:	DMA direction (from or to device)
+ * @buf:	buffer physical address
+ * @len:	buffer length
+ * @next:	address of next bytes to DMA transfer
+ * @left:	number of bytes remaining
+ * @ctx:	next context to write (0: context_a; 1: context_b)
+ * @irq_on:	are the DMA IRQs currently enabled?
+ * @lock:	spinlock to protect access to the structure
+ */
+struct parport_ip32_dma_data {
+	enum dma_data_direction		dir;
+	dma_addr_t			buf;
+	dma_addr_t			next;
+	size_t				len;
+	size_t				left;
+	unsigned int			ctx;
+	unsigned int			irq_on;
+	spinlock_t			lock;
+};
+static struct parport_ip32_dma_data parport_ip32_dma;
+
+/**
+ * parport_ip32_dma_setup_context - setup next DMA context
+ * @limit:	maximum data size for the context
+ *
+ * The alignment constraints must be verified in caller function, and the
+ * parameter @limit must be set accordingly.
+ */
+static void parport_ip32_dma_setup_context(unsigned int limit)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&parport_ip32_dma.lock, flags);
+	if (parport_ip32_dma.left > 0) {
+		/* Note: ctxreg is "volatile" here only because
+		 * mace->perif.ctrl.parport.context_a and context_b are
+		 * "volatile".  */
+		volatile u64 __iomem *ctxreg = (parport_ip32_dma.ctx == 0) ?
+			&mace->perif.ctrl.parport.context_a :
+			&mace->perif.ctrl.parport.context_b;
+		u64 count;
+		u64 ctxval;
+		if (parport_ip32_dma.left <= limit) {
+			count = parport_ip32_dma.left;
+			ctxval = MACEPAR_CONTEXT_LASTFLAG;
+		} else {
+			count = limit;
+			ctxval = 0;
+		}
+
+		pr_trace(NULL,
+			 "(%u): 0x%04x:0x%04x, %u -> %u%s",
+			 limit,
+			 (unsigned int)parport_ip32_dma.buf,
+			 (unsigned int)parport_ip32_dma.next,
+			 (unsigned int)count,
+			 parport_ip32_dma.ctx, ctxval ? "*" : "");
+
+		ctxval |= parport_ip32_dma.next &
+			MACEPAR_CONTEXT_BASEADDR_MASK;
+		ctxval |= ((count - 1) << MACEPAR_CONTEXT_DATALEN_SHIFT) &
+			MACEPAR_CONTEXT_DATALEN_MASK;
+		writeq(ctxval, ctxreg);
+		parport_ip32_dma.next += count;
+		parport_ip32_dma.left -= count;
+		parport_ip32_dma.ctx ^= 1U;
+	}
+	/* If there is nothing more to send, disable IRQs to avoid to
+	 * face an IRQ storm which can lock the machine.  Disable them
+	 * only once. */
+	if (parport_ip32_dma.left == 0 && parport_ip32_dma.irq_on) {
+		pr_debug(PPIP32 "IRQ off (ctx)\n");
+		disable_irq_nosync(MACEISA_PAR_CTXA_IRQ);
+		disable_irq_nosync(MACEISA_PAR_CTXB_IRQ);
+		parport_ip32_dma.irq_on = 0;
+	}
+	spin_unlock_irqrestore(&parport_ip32_dma.lock, flags);
+}
+
+/**
+ * parport_ip32_dma_interrupt - DMA interrupt handler
+ * @irq:	interrupt number
+ * @dev_id:	unused
+ * @regs:	pointer to &struct pt_regs
+ */
+static irqreturn_t parport_ip32_dma_interrupt(int irq, void *dev_id,
+					      struct pt_regs *regs)
+{
+	if (parport_ip32_dma.left)
+		pr_trace(NULL, "(%d): ctx=%d", irq, parport_ip32_dma.ctx);
+	parport_ip32_dma_setup_context(MACEPAR_CONTEXT_DATA_BOUND);
+	return IRQ_HANDLED;
+}
+
+#if DEBUG_PARPORT_IP32
+static irqreturn_t parport_ip32_merr_interrupt(int irq, void *dev_id,
+					       struct pt_regs *regs)
+{
+	pr_trace1(NULL, "(%d)", irq);
+	return IRQ_HANDLED;
+}
+#endif
+
+/**
+ * parport_ip32_dma_start - begins a DMA transfer
+ * @dir:	DMA direction: DMA_TO_DEVICE or DMA_FROM_DEVICE
+ * @addr:	pointer to data buffer
+ * @count:	buffer size
+ *
+ * Calls to parport_ip32_dma_start() and parport_ip32_dma_stop() must be
+ * correctly balanced.
+ */
+static int parport_ip32_dma_start(enum dma_data_direction dir,
+				  void *addr, size_t count)
+{
+	unsigned int limit;
+	u64 ctrl;
+
+	pr_trace(NULL, "(%d, %lu)", dir, (unsigned long)count);
+
+	/* FIXME - add support for DMA_FROM_DEVICE.  In this case, buffer must
+	 * be 64 bytes aligned. */
+	BUG_ON(dir != DMA_TO_DEVICE);
+
+	/* Reset DMA controller */
+	ctrl = MACEPAR_CTLSTAT_RESET;
+	writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+
+	/* DMA IRQs should normally be enabled */
+	if (!parport_ip32_dma.irq_on) {
+		WARN_ON(1);
+		enable_irq(MACEISA_PAR_CTXA_IRQ);
+		enable_irq(MACEISA_PAR_CTXB_IRQ);
+		parport_ip32_dma.irq_on = 1;
+	}
+
+	/* Prepare DMA pointers */
+	parport_ip32_dma.dir = dir;
+	parport_ip32_dma.buf = dma_map_single(NULL, addr, count, dir);
+	parport_ip32_dma.len = count;
+	parport_ip32_dma.next = parport_ip32_dma.buf;
+	parport_ip32_dma.left = parport_ip32_dma.len;
+	parport_ip32_dma.ctx = 0;
+
+	/* Setup DMA direction and first two contexts */
+	ctrl = (dir == DMA_TO_DEVICE) ? 0 : MACEPAR_CTLSTAT_DIRECTION;
+	writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+	/* Single transfer should not cross a 4K page boundary */
+	limit = MACEPAR_CONTEXT_DATA_BOUND -
+		(parport_ip32_dma.next & (MACEPAR_CONTEXT_DATA_BOUND - 1));
+	parport_ip32_dma_setup_context(limit);
+	parport_ip32_dma_setup_context(MACEPAR_CONTEXT_DATA_BOUND);
+
+	/* Real start of DMA transfer */
+	ctrl |= MACEPAR_CTLSTAT_ENABLE;
+	writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+
+	return 0;
+}
+
+/**
+ * parport_ip32_dma_stop - ends a running DMA transfer
+ *
+ * Calls to parport_ip32_dma_start() and parport_ip32_dma_stop() must be
+ * correctly balanced.
+ */
+static void parport_ip32_dma_stop(void)
+{
+	u64 ctx_a;
+	u64 ctx_b;
+	u64 ctrl;
+	u64 diag;
+	size_t res[2];	/* {[0] = res_a, [1] = res_b} */
+
+	pr_trace(NULL, "()");
+
+	/* Disable IRQs */
+	spin_lock_irq(&parport_ip32_dma.lock);
+	if (parport_ip32_dma.irq_on) {
+		pr_debug(PPIP32 "IRQ off (stop)\n");
+		disable_irq_nosync(MACEISA_PAR_CTXA_IRQ);
+		disable_irq_nosync(MACEISA_PAR_CTXB_IRQ);
+		parport_ip32_dma.irq_on = 0;
+	}
+	spin_unlock_irq(&parport_ip32_dma.lock);
+	/* Force IRQ synchronization, even if the IRQs were disabled
+	 * elsewhere. */
+	synchronize_irq(MACEISA_PAR_CTXA_IRQ);
+	synchronize_irq(MACEISA_PAR_CTXB_IRQ);
+
+	/* Stop DMA transfer */
+	ctrl = readq(&mace->perif.ctrl.parport.cntlstat);
+	ctrl &= ~MACEPAR_CTLSTAT_ENABLE;
+	writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+
+	/* Adjust residue (parport_ip32_dma.left) */
+	ctx_a = readq(&mace->perif.ctrl.parport.context_a);
+	ctx_b = readq(&mace->perif.ctrl.parport.context_b);
+	ctrl = readq(&mace->perif.ctrl.parport.cntlstat);
+	diag = readq(&mace->perif.ctrl.parport.diagnostic);
+	res[0] = (ctrl & MACEPAR_CTLSTAT_CTXA_VALID) ?
+		1 + ((ctx_a & MACEPAR_CONTEXT_DATALEN_MASK) >>
+		     MACEPAR_CONTEXT_DATALEN_SHIFT) :
+		0;
+	res[1] = (ctrl & MACEPAR_CTLSTAT_CTXB_VALID) ?
+		1 + ((ctx_b & MACEPAR_CONTEXT_DATALEN_MASK) >>
+		     MACEPAR_CONTEXT_DATALEN_SHIFT) :
+		0;
+	if (diag & MACEPAR_DIAG_DMACTIVE)
+		res[(diag & MACEPAR_DIAG_CTXINUSE) != 0] =
+			1 + ((diag & MACEPAR_DIAG_CTRMASK) >>
+			     MACEPAR_DIAG_CTRSHIFT);
+	parport_ip32_dma.left += res[0] + res[1];
+
+	/* Reset DMA controller, and re-enable IRQs */
+	ctrl = MACEPAR_CTLSTAT_RESET;
+	writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+	pr_debug(PPIP32 "IRQ on (stop)\n");
+	enable_irq(MACEISA_PAR_CTXA_IRQ);
+	enable_irq(MACEISA_PAR_CTXB_IRQ);
+	parport_ip32_dma.irq_on = 1;
+
+	dma_unmap_single(NULL, parport_ip32_dma.buf, parport_ip32_dma.len,
+			 parport_ip32_dma.dir);
+}
+
+/**
+ * parport_ip32_dma_get_residue - get residue from last DMA transfer
+ *
+ * Returns the number of bytes remaining from last DMA transfer.
+ */
+static inline size_t parport_ip32_dma_get_residue(void)
+{
+	return parport_ip32_dma.left;
+}
+
+/**
+ * parport_ip32_dma_register - initialize DMA engine
+ *
+ * Returns zero for success.
+ */
+static int parport_ip32_dma_register(void)
+{
+	int err;
+
+	spin_lock_init(&parport_ip32_dma.lock);
+	parport_ip32_dma.irq_on = 1;
+
+	/* Reset DMA controller */
+	writeq(MACEPAR_CTLSTAT_RESET, &mace->perif.ctrl.parport.cntlstat);
+
+	/* Request IRQs */
+	err = request_irq(MACEISA_PAR_CTXA_IRQ, parport_ip32_dma_interrupt,
+			  0, "parport_ip32", NULL);
+	if (err)
+		goto fail_a;
+	err = request_irq(MACEISA_PAR_CTXB_IRQ, parport_ip32_dma_interrupt,
+			  0, "parport_ip32", NULL);
+	if (err)
+		goto fail_b;
+#if DEBUG_PARPORT_IP32
+	/* FIXME - what is this IRQ for? */
+	err = request_irq(MACEISA_PAR_MERR_IRQ, parport_ip32_merr_interrupt,
+			  0, "parport_ip32", NULL);
+	if (err)
+		goto fail_merr;
+#endif
+	return 0;
+
+#if DEBUG_PARPORT_IP32
+fail_merr:
+	free_irq(MACEISA_PAR_CTXB_IRQ, NULL);
+#endif
+fail_b:
+	free_irq(MACEISA_PAR_CTXA_IRQ, NULL);
+fail_a:
+	return err;
+}
+
+/**
+ * parport_ip32_dma_unregister - release and free resources for DMA engine
+ */
+static void parport_ip32_dma_unregister(void)
+{
+#if DEBUG_PARPORT_IP32
+	free_irq(MACEISA_PAR_MERR_IRQ, NULL);
+#endif
+	free_irq(MACEISA_PAR_CTXB_IRQ, NULL);
+	free_irq(MACEISA_PAR_CTXA_IRQ, NULL);
+}
+
+/*--- Interrupt handlers and associates --------------------------------*/
+
+/**
+ * parport_ip32_wakeup - wakes up code waiting for an interrupt
+ * @p:		pointer to &struct parport
+ */
+static inline void parport_ip32_wakeup(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	complete(&priv->irq_complete);
+}
+
+/**
+ * parport_ip32_interrupt - interrupt handler
+ * @irq:	interrupt number
+ * @dev_id:	pointer to &struct parport
+ * @regs:	pointer to &struct pt_regs
+ *
+ * Caught interrupts are forwarded to the upper parport layer if IRQ_mode is
+ * %PARPORT_IP32_IRQ_FWD.
+ */
+static irqreturn_t parport_ip32_interrupt(int irq, void *dev_id,
+					  struct pt_regs *regs)
+{
+	struct parport * const p = dev_id;
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	enum parport_ip32_irq_mode irq_mode = priv->irq_mode;
+	switch (irq_mode) {
+	case PARPORT_IP32_IRQ_FWD:
+		parport_generic_irq(irq, p, regs);
+		break;
+	case PARPORT_IP32_IRQ_HERE:
+		parport_ip32_wakeup(p);
+		break;
+	}
+	return IRQ_HANDLED;
+}
+
+/*--- Some utility function to manipulate ECR register -----------------*/
+
+/**
+ * parport_ip32_read_econtrol - read contents of the ECR register
+ * @p:		pointer to &struct parport
+ */
+static inline unsigned int parport_ip32_read_econtrol(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return readb(priv->regs.ecr);
+}
+
+/**
+ * parport_ip32_write_econtrol - write new contents to the ECR register
+ * @p:		pointer to &struct parport
+ * @c:		new value to write
+ */
+static inline void parport_ip32_write_econtrol(struct parport *p,
+					       unsigned int c)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	writeb(c, priv->regs.ecr);
+}
+
+/**
+ * parport_ip32_frob_econtrol - change bits from the ECR register
+ * @p:		pointer to &struct parport
+ * @mask:	bit mask of bits to change
+ * @val:	new value for changed bits
+ *
+ * Read from the ECR, mask out the bits in @mask, exclusive-or with the bits
+ * in @val, and write the result to the ECR.
+ */
+static inline void parport_ip32_frob_econtrol(struct parport *p,
+					      unsigned int mask,
+					      unsigned int val)
+{
+	unsigned int c;
+	c = (parport_ip32_read_econtrol(p) & ~mask) ^ val;
+	parport_ip32_write_econtrol(p, c);
+}
+
+/**
+ * parport_ip32_set_mode - change mode of ECP port
+ * @p:		pointer to &struct parport
+ * @mode:	new mode to write in ECR
+ *
+ * ECR is reset in a sane state (interrupts and DMA disabled), and placed in
+ * mode @mode.  Go through PS2 mode if needed.
+ */
+static void parport_ip32_set_mode(struct parport *p, unsigned int mode)
+{
+	unsigned int omode;
+
+	mode &= ECR_MODE_MASK;
+	omode = parport_ip32_read_econtrol(p) & ECR_MODE_MASK;
+
+	if (!(mode == ECR_MODE_SPP || mode == ECR_MODE_PS2
+	      || omode == ECR_MODE_SPP || omode == ECR_MODE_PS2)) {
+		/* We have to go through PS2 mode */
+		unsigned int ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
+		parport_ip32_write_econtrol(p, ecr);
+	}
+	parport_ip32_write_econtrol(p, mode | ECR_nERRINTR | ECR_SERVINTR);
+}
+
+/*--- Basic functions needed for parport -------------------------------*/
+
+/**
+ * parport_ip32_read_data - return current contents of the DATA register
+ * @p:		pointer to &struct parport
+ */
+static inline unsigned char parport_ip32_read_data(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return readb(priv->regs.data);
+}
+
+/**
+ * parport_ip32_write_data - set new contents for the DATA register
+ * @p:		pointer to &struct parport
+ * @d:		new value to write
+ */
+static inline void parport_ip32_write_data(struct parport *p, unsigned char d)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	writeb(d, priv->regs.data);
+}
+
+/**
+ * parport_ip32_read_status - return current contents of the DSR register
+ * @p:		pointer to &struct parport
+ */
+static inline unsigned char parport_ip32_read_status(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return readb(priv->regs.dsr);
+}
+
+/**
+ * __parport_ip32_read_control - return cached contents of the DCR register
+ * @p:		pointer to &struct parport
+ */
+static inline unsigned int __parport_ip32_read_control(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return priv->dcr_cache; /* use soft copy */
+}
+
+/**
+ * __parport_ip32_write_control - set new contents for the DCR register
+ * @p:		pointer to &struct parport
+ * @c:		new value to write
+ */
+static inline void __parport_ip32_write_control(struct parport *p,
+						unsigned int c)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	CHECK_EXTRA_BITS(p, c, priv->dcr_writable);
+	c &= priv->dcr_writable; /* only writable bits */
+	writeb(c, priv->regs.dcr);
+	priv->dcr_cache = c;		/* update soft copy */
+}
+
+/**
+ * __parport_ip32_frob_control - change bits from the DCR register
+ * @p:		pointer to &struct parport
+ * @mask:	bit mask of bits to change
+ * @val:	new value for changed bits
+ *
+ * This is equivalent to read from the DCR, mask out the bits in @mask,
+ * exclusive-or with the bits in @val, and write the result to the DCR.
+ * Actually, the cached contents of the DCR is used.
+ */
+static inline void __parport_ip32_frob_control(struct parport *p,
+					       unsigned int mask,
+					       unsigned int val)
+{
+	unsigned int c;
+	c = (__parport_ip32_read_control(p) & ~mask) ^ val;
+	__parport_ip32_write_control(p, c);
+}
+
+/**
+ * parport_ip32_read_control - return cached contents of the DCR register
+ * @p:		pointer to &struct parport
+ *
+ * The return value is masked so as to only return the value of %DCR_STROBE,
+ * %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
+ */
+static inline unsigned char parport_ip32_read_control(struct parport *p)
+{
+	const unsigned int rm =
+		DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
+	return __parport_ip32_read_control(p) & rm;
+}
+
+/**
+ * parport_ip32_write_control - set new contents for the DCR register
+ * @p:		pointer to &struct parport
+ * @c:		new value to write
+ *
+ * The value is masked so as to only change the value of %DCR_STROBE,
+ * %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
+ */
+static inline void parport_ip32_write_control(struct parport *p,
+					      unsigned char c)
+{
+	const unsigned int wm =
+		DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
+	CHECK_EXTRA_BITS(p, c, wm);
+	__parport_ip32_frob_control(p, wm, c & wm);
+}
+
+/**
+ * parport_ip32_frob_control - change bits from the DCR register
+ * @p:		pointer to &struct parport
+ * @mask:	bit mask of bits to change
+ * @val:	new value for changed bits
+ *
+ * This differs from __parport_ip32_frob_control() in that it only allows to
+ * change the value of %DCR_STROBE, %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
+ */
+static inline unsigned char parport_ip32_frob_control(struct parport *p,
+						      unsigned char mask,
+						      unsigned char val)
+{
+	const unsigned int wm =
+		DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
+	CHECK_EXTRA_BITS(p, mask, wm);
+	CHECK_EXTRA_BITS(p, val, wm);
+	__parport_ip32_frob_control(p, mask & wm, val & wm);
+	return parport_ip32_read_control(p);
+}
+
+/**
+ * parport_ip32_disable_irq - disable interrupts on the rising edge of nACK
+ * @p:		pointer to &struct parport
+ */
+static inline void parport_ip32_disable_irq(struct parport *p)
+{
+	__parport_ip32_frob_control(p, DCR_IRQ, 0);
+}
+
+/**
+ * parport_ip32_enable_irq - enable interrupts on the rising edge of nACK
+ * @p:		pointer to &struct parport
+ */
+static inline void parport_ip32_enable_irq(struct parport *p)
+{
+	__parport_ip32_frob_control(p, DCR_IRQ, DCR_IRQ);
+}
+
+/**
+ * parport_ip32_data_forward - enable host-to-peripheral communications
+ * @p:		pointer to &struct parport
+ *
+ * Enable the data line drivers, for 8-bit host-to-peripheral communications.
+ */
+static inline void parport_ip32_data_forward(struct parport *p)
+{
+	__parport_ip32_frob_control(p, DCR_DIR, 0);
+}
+
+/**
+ * parport_ip32_data_reverse - enable peripheral-to-host communications
+ * @p:		pointer to &struct parport
+ *
+ * Place the data bus in a high impedance state, if @p->modes has the
+ * PARPORT_MODE_TRISTATE bit set.
+ */
+static inline void parport_ip32_data_reverse(struct parport *p)
+{
+	__parport_ip32_frob_control(p, DCR_DIR, DCR_DIR);
+}
+
+/**
+ * parport_ip32_init_state - for core parport code
+ * @dev:	pointer to &struct pardevice
+ * @s:		pointer to &struct parport_state to initialize
+ */
+static void parport_ip32_init_state(struct pardevice *dev,
+				    struct parport_state *s)
+{
+	s->u.ip32.dcr = DCR_SELECT | DCR_nINIT;
+	s->u.ip32.ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
+}
+
+/**
+ * parport_ip32_save_state - for core parport code
+ * @p:		pointer to &struct parport
+ * @s:		pointer to &struct parport_state to save state to
+ */
+static void parport_ip32_save_state(struct parport *p,
+				    struct parport_state *s)
+{
+	s->u.ip32.dcr = __parport_ip32_read_control(p);
+	s->u.ip32.ecr = parport_ip32_read_econtrol(p);
+}
+
+/**
+ * parport_ip32_restore_state - for core parport code
+ * @p:		pointer to &struct parport
+ * @s:		pointer to &struct parport_state to restore state from
+ */
+static void parport_ip32_restore_state(struct parport *p,
+				       struct parport_state *s)
+{
+	parport_ip32_set_mode(p, s->u.ip32.ecr & ECR_MODE_MASK);
+	parport_ip32_write_econtrol(p, s->u.ip32.ecr);
+	__parport_ip32_write_control(p, s->u.ip32.dcr);
+}
+
+/*--- EPP mode functions -----------------------------------------------*/
+
+/**
+ * parport_ip32_clear_epp_timeout - clear Timeout bit in EPP mode
+ * @p:		pointer to &struct parport
+ *
+ * Returns 1 if the Timeout bit is clear, and 0 otherwise.
+ */
+static unsigned int parport_ip32_clear_epp_timeout(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	unsigned int cleared;
+
+	if (!(parport_ip32_read_status(p) & DSR_TIMEOUT))
+		cleared = 1;
+	else {
+		unsigned int r;
+		/* To clear timeout some chips require double read */
+		parport_ip32_read_status(p);
+		r = parport_ip32_read_status(p);
+		/* Some reset by writing 1 */
+		writeb(r | DSR_TIMEOUT, priv->regs.dsr);
+		/* Others by writing 0 */
+		writeb(r & ~DSR_TIMEOUT, priv->regs.dsr);
+
+		r = parport_ip32_read_status(p);
+		cleared = !(r & DSR_TIMEOUT);
+	}
+
+	pr_trace(p, "(): %s", cleared ? "cleared" : "failed");
+	return cleared;
+}
+
+/**
+ * parport_ip32_epp_read - generic EPP read function
+ * @eppreg:	I/O register to read from
+ * @p:		pointer to &struct parport
+ * @buf:	buffer to store read data
+ * @len:	length of buffer @buf
+ * @flags:	may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_read(void __iomem *eppreg,
+				    struct parport *p, void *buf,
+				    size_t len, int flags)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	size_t got;
+	parport_ip32_set_mode(p, ECR_MODE_EPP);
+	parport_ip32_data_reverse(p);
+	parport_ip32_write_control(p, DCR_nINIT);
+	if ((flags & PARPORT_EPP_FAST) && (len > 1)) {
+		readsb(eppreg, buf, len);
+		if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+			parport_ip32_clear_epp_timeout(p);
+			return -EIO;
+		}
+		got = len;
+	} else {
+		u8 *bufp = buf;
+		for (got = 0; got < len; got++) {
+			*bufp++ = readb(eppreg);
+			if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+				parport_ip32_clear_epp_timeout(p);
+				break;
+			}
+		}
+	}
+	parport_ip32_data_forward(p);
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	return got;
+}
+
+/**
+ * parport_ip32_epp_write - generic EPP write function
+ * @eppreg:	I/O register to write to
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ * @flags:	may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_write(void __iomem *eppreg,
+				     struct parport *p, const void *buf,
+				     size_t len, int flags)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	size_t written;
+	parport_ip32_set_mode(p, ECR_MODE_EPP);
+	parport_ip32_data_forward(p);
+	parport_ip32_write_control(p, DCR_nINIT);
+	if ((flags & PARPORT_EPP_FAST) && (len > 1)) {
+		writesb(eppreg, buf, len);
+		if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+			parport_ip32_clear_epp_timeout(p);
+			return -EIO;
+		}
+		written = len;
+	} else {
+		const u8 *bufp = buf;
+		for (written = 0; written < len; written++) {
+			writeb(*bufp++, eppreg);
+			if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+				parport_ip32_clear_epp_timeout(p);
+				break;
+			}
+		}
+	}
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	return written;
+}
+
+/**
+ * parport_ip32_epp_read_data - read a block of data in EPP mode
+ * @p:		pointer to &struct parport
+ * @buf:	buffer to store read data
+ * @len:	length of buffer @buf
+ * @flags:	may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_read_data(struct parport *p, void *buf,
+					 size_t len, int flags)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return parport_ip32_epp_read(priv->regs.eppData0, p, buf, len, flags);
+}
+
+/**
+ * parport_ip32_epp_write_data - write a block of data in EPP mode
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ * @flags:	may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_write_data(struct parport *p, const void *buf,
+					  size_t len, int flags)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return parport_ip32_epp_write(priv->regs.eppData0, p, buf, len, flags);
+}
+
+/**
+ * parport_ip32_epp_read_addr - read a block of addresses in EPP mode
+ * @p:		pointer to &struct parport
+ * @buf:	buffer to store read data
+ * @len:	length of buffer @buf
+ * @flags:	may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_read_addr(struct parport *p, void *buf,
+					 size_t len, int flags)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return parport_ip32_epp_read(priv->regs.eppAddr, p, buf, len, flags);
+}
+
+/**
+ * parport_ip32_epp_write_addr - write a block of addresses in EPP mode
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ * @flags:	may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_write_addr(struct parport *p, const void *buf,
+					  size_t len, int flags)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return parport_ip32_epp_write(priv->regs.eppAddr, p, buf, len, flags);
+}
+
+/*--- ECP mode functions (FIFO) ----------------------------------------*/
+
+/**
+ * parport_ip32_fifo_wait_break - check if the waiting function should return
+ * @p:		pointer to &struct parport
+ * @expire:	timeout expiring date, in jiffies
+ *
+ * parport_ip32_fifo_wait_break() checks if the waiting function should return
+ * immediately or not.  The break conditions are:
+ *	- expired timeout;
+ *	- a pending signal;
+ *	- nFault asserted low.
+ * This function also calls cond_resched().
+ */
+static unsigned int parport_ip32_fifo_wait_break(struct parport *p,
+						 unsigned long expire)
+{
+	cond_resched();
+	if (time_after(jiffies, expire)) {
+		pr_debug1(PPIP32 "%s: FIFO write timed out\n", p->name);
+		return 1;
+	}
+	if (signal_pending(current)) {
+		pr_debug1(PPIP32 "%s: Signal pending\n", p->name);
+		return 1;
+	}
+	if (!(parport_ip32_read_status(p) & DSR_nFAULT)) {
+		pr_debug1(PPIP32 "%s: nFault asserted low\n", p->name);
+		return 1;
+	}
+	return 0;
+}
+
+/**
+ * parport_ip32_fwp_wait_polling - wait for FIFO to empty (polling)
+ * @p:		pointer to &struct parport
+ *
+ * Returns the number of bytes that can safely be written in the FIFO.  A
+ * return value of zero means that the calling function should terminate as
+ * fast as possible.
+ */
+static unsigned int parport_ip32_fwp_wait_polling(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	struct parport * const physport = p->physport;
+	unsigned long expire;
+	unsigned int count;
+	unsigned int ecr;
+
+	expire = jiffies + physport->cad->timeout;
+	count = 0;
+	while (1) {
+		if (parport_ip32_fifo_wait_break(p, expire))
+			break;
+
+		/* Check FIFO state.  We do nothing when the FIFO is nor full,
+		 * nor empty.  It appears that the FIFO full bit is not always
+		 * reliable, the FIFO state is sometimes wrongly reported, and
+		 * the chip gets confused if we give it another byte. */
+		ecr = parport_ip32_read_econtrol(p);
+		if (ecr & ECR_F_EMPTY) {
+			/* FIFO is empty, fill it up */
+			count = priv->fifo_depth;
+			break;
+		}
+
+		/* Wait a moment... */
+		udelay(FIFO_POLLING_INTERVAL);
+	} /* while (1) */
+
+	return count;
+}
+
+/**
+ * parport_ip32_fwp_wait_interrupt - wait for FIFO to empty (interrupt-driven)
+ * @p:		pointer to &struct parport
+ *
+ * Returns the number of bytes that can safely be written in the FIFO.  A
+ * return value of zero means that the calling function should terminate as
+ * fast as possible.
+ */
+static unsigned int parport_ip32_fwp_wait_interrupt(struct parport *p)
+{
+	static unsigned int lost_interrupt = 0;
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	struct parport * const physport = p->physport;
+	unsigned long nfault_timeout;
+	unsigned long expire;
+	unsigned int count;
+	unsigned int ecr;
+
+	nfault_timeout = min((unsigned long)physport->cad->timeout,
+			     msecs_to_jiffies(FIFO_NFAULT_TIMEOUT));
+	expire = jiffies + physport->cad->timeout;
+	count = 0;
+	while (1) {
+		if (parport_ip32_fifo_wait_break(p, expire))
+			break;
+
+		/* Initialize mutex used to take interrupts into account */
+		INIT_COMPLETION(priv->irq_complete);
+
+		/* Enable serviceIntr */
+		parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);
+
+		/* Enabling serviceIntr while the FIFO is empty does not
+		 * always generate an interrupt, so check for emptiness
+		 * now. */
+		ecr = parport_ip32_read_econtrol(p);
+		if (!(ecr & ECR_F_EMPTY)) {
+			/* FIFO is not empty: wait for an interrupt or a
+			 * timeout to occur */
+			wait_for_completion_interruptible_timeout(
+				&priv->irq_complete, nfault_timeout);
+			ecr = parport_ip32_read_econtrol(p);
+			if ((ecr & ECR_F_EMPTY) && !(ecr & ECR_SERVINTR)
+			    && !lost_interrupt) {
+				printk(KERN_WARNING PPIP32
+				       "%s: lost interrupt in %s\n",
+				       p->name, __func__);
+				lost_interrupt = 1;
+			}
+		}
+
+		/* Disable serviceIntr */
+		parport_ip32_frob_econtrol(p, ECR_SERVINTR, ECR_SERVINTR);
+
+		/* Check FIFO state */
+		if (ecr & ECR_F_EMPTY) {
+			/* FIFO is empty, fill it up */
+			count = priv->fifo_depth;
+			break;
+		} else if (ecr & ECR_SERVINTR) {
+			/* FIFO is not empty, but we know that can safely push
+			 * writeIntrThreshold bytes into it */
+			count = priv->writeIntrThreshold;
+			break;
+		}
+		/* FIFO is not empty, and we did not get any interrupt.
+		 * Either it's time to check for nFault, or a signal is
+		 * pending.  This is verified in
+		 * parport_ip32_fifo_wait_break(), so we continue the loop. */
+	} /* while (1) */
+
+	return count;
+}
+
+/**
+ * parport_ip32_fifo_write_block_pio - write a block of data (PIO mode)
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ *
+ * Uses PIO to write the contents of the buffer @buf into the parallel port
+ * FIFO.  Returns the number of bytes that were actually written.  It can work
+ * with or without the help of interrupts.  The parallel port must be
+ * correctly initialized before calling parport_ip32_fifo_write_block_pio().
+ */
+static size_t parport_ip32_fifo_write_block_pio(struct parport *p,
+						const void *buf, size_t len)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	const u8 *bufp = buf;
+	size_t left = len;
+
+	priv->irq_mode = PARPORT_IP32_IRQ_HERE;
+
+	while (left > 0) {
+		unsigned int count;
+
+		count = (p->irq == PARPORT_IRQ_NONE) ?
+			parport_ip32_fwp_wait_polling(p) :
+			parport_ip32_fwp_wait_interrupt(p);
+		if (count == 0)
+			break;	/* Transmission should be stopped */
+		if (count > left)
+			count = left;
+		if (count == 1) {
+			writeb(*bufp, priv->regs.fifo);
+			bufp++, left--;
+		} else {
+			writesb(priv->regs.fifo, bufp, count);
+			bufp += count, left -= count;
+		}
+	}
+
+	priv->irq_mode = PARPORT_IP32_IRQ_FWD;
+
+	return len - left;
+}
+
+/**
+ * parport_ip32_fifo_write_block_dma - write a block of data (DMA mode)
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ *
+ * Uses DMA to write the contents of the buffer @buf into the parallel port
+ * FIFO.  Returns the number of bytes that were actually written.  The
+ * parallel port must be correctly initialized before calling
+ * parport_ip32_fifo_write_block_dma().
+ */
+static size_t parport_ip32_fifo_write_block_dma(struct parport *p,
+						const void *buf, size_t len)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	struct parport * const physport = p->physport;
+	unsigned long nfault_timeout;
+	unsigned long expire;
+	size_t written;
+	unsigned int ecr;
+
+	priv->irq_mode = PARPORT_IP32_IRQ_HERE;
+
+	parport_ip32_dma_start(DMA_TO_DEVICE, (void *)buf, len);
+	INIT_COMPLETION(priv->irq_complete);
+	parport_ip32_frob_econtrol(p, ECR_DMAEN | ECR_SERVINTR, ECR_DMAEN);
+
+	nfault_timeout = min((unsigned long)physport->cad->timeout,
+			     msecs_to_jiffies(FIFO_NFAULT_TIMEOUT));
+	expire = jiffies + physport->cad->timeout;
+	while (1) {
+		if (parport_ip32_fifo_wait_break(p, expire))
+			break;
+		wait_for_completion_interruptible_timeout(&priv->irq_complete,
+							  nfault_timeout);
+		ecr = parport_ip32_read_econtrol(p);
+		if (ecr & ECR_SERVINTR)
+			break;	/* DMA transfer just finished */
+	}
+	parport_ip32_dma_stop();
+	written = len - parport_ip32_dma_get_residue();
+
+	priv->irq_mode = PARPORT_IP32_IRQ_FWD;
+
+	return written;
+}
+
+/**
+ * parport_ip32_fifo_write_block - write a block of data
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ *
+ * Uses PIO or DMA to write the contents of the buffer @buf into the parallel
+ * p FIFO.  Returns the number of bytes that were actually written.
+ */
+static size_t parport_ip32_fifo_write_block(struct parport *p,
+					    const void *buf, size_t len)
+{
+	size_t written = 0;
+	if (len)
+		/* FIXME - Maybe some threshold value should be set for @len
+		 * under which we revert to PIO mode? */
+		written = (p->modes & PARPORT_MODE_DMA) ?
+			parport_ip32_fifo_write_block_dma(p, buf, len) :
+			parport_ip32_fifo_write_block_pio(p, buf, len);
+	return written;
+}
+
+/**
+ * parport_ip32_drain_fifo - wait for FIFO to empty
+ * @p:		pointer to &struct parport
+ * @timeout:	timeout, in jiffies
+ *
+ * This function waits for FIFO to empty.  It returns 1 when FIFO is empty, or
+ * 0 if the timeout @timeout is reached before, or if a signal is pending.
+ */
+static unsigned int parport_ip32_drain_fifo(struct parport *p,
+					    unsigned long timeout)
+{
+	unsigned long expire = jiffies + timeout;
+	unsigned int polling_interval;
+	unsigned int counter;
+
+	/* Busy wait for approx. 200us */
+	for (counter = 0; counter < 40; counter++) {
+		if (parport_ip32_read_econtrol(p) & ECR_F_EMPTY)
+			break;
+		if (time_after(jiffies, expire))
+			break;
+		if (signal_pending(current))
+			break;
+		udelay(5);
+	}
+	/* Poll slowly.  Polling interval starts with 1 millisecond, and is
+	 * increased exponentially until 128.  */
+	polling_interval = 1; /* msecs */
+	while (!(parport_ip32_read_econtrol(p) & ECR_F_EMPTY)) {
+		if (time_after_eq(jiffies, expire))
+			break;
+		msleep_interruptible(polling_interval);
+		if (signal_pending(current))
+			break;
+		if (polling_interval < 128)
+			polling_interval *= 2;
+	}
+
+	return !!(parport_ip32_read_econtrol(p) & ECR_F_EMPTY);
+}
+
+/**
+ * parport_ip32_get_fifo_residue - reset FIFO
+ * @p:		pointer to &struct parport
+ * @mode:	current operation mode (ECR_MODE_PPF or ECR_MODE_ECP)
+ *
+ * This function resets FIFO, and returns the number of bytes remaining in it.
+ */
+static unsigned int parport_ip32_get_fifo_residue(struct parport *p,
+						  unsigned int mode)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	unsigned int residue;
+	unsigned int cnfga;
+
+	/* FIXME - We are missing one byte if the printer is off-line.  I
+	 * don't know how to detect this.  It looks that the full bit is not
+	 * always reliable.  For the moment, the problem is avoided in most
+	 * cases by testing for BUSY in parport_ip32_compat_write_data().
+	 */
+	if (parport_ip32_read_econtrol(p) & ECR_F_EMPTY)
+		residue = 0;
+	else {
+		pr_debug1(PPIP32 "%s: FIFO is stuck\n", p->name);
+
+		/* Stop all transfers.
+		 *
+		 * Microsoft's document instructs to drive DCR_STROBE to 0,
+		 * but it doesn't work (at least in Compatibility mode, not
+		 * tested in ECP mode).  Switching directly to Test mode (as
+		 * in parport_pc) is not an option: it does confuse the port,
+		 * ECP service interrupts are no more working after that.  A
+		 * hard reset is then needed to revert to a sane state.
+		 *
+		 * Let's hope that the FIFO is really stuck and that the
+		 * peripheral doesn't wake up now.
+		 */
+		parport_ip32_frob_control(p, DCR_STROBE, 0);
+
+		/* Fill up FIFO */
+		for (residue = priv->fifo_depth; residue > 0; residue--) {
+			if (parport_ip32_read_econtrol(p) & ECR_F_FULL)
+				break;
+			writeb(0x00, priv->regs.fifo);
+		}
+	}
+	if (residue)
+		pr_debug1(PPIP32 "%s: %d PWord%s left in FIFO\n",
+			  p->name, residue,
+			  (residue == 1) ? " was" : "s were");
+
+	/* Now reset the FIFO */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+
+	/* Host recovery for ECP mode */
+	if (mode == ECR_MODE_ECP) {
+		parport_ip32_data_reverse(p);
+		parport_ip32_frob_control(p, DCR_nINIT, 0);
+		if (parport_wait_peripheral(p, DSR_PERROR, 0))
+			pr_debug1(PPIP32 "%s: PEerror timeout 1 in %s\n",
+				  p->name, __func__);
+		parport_ip32_frob_control(p, DCR_STROBE, DCR_STROBE);
+		parport_ip32_frob_control(p, DCR_nINIT, DCR_nINIT);
+		if (parport_wait_peripheral(p, DSR_PERROR, DSR_PERROR))
+			pr_debug1(PPIP32 "%s: PEerror timeout 2 in %s\n",
+				  p->name, __func__);
+	}
+
+	/* Adjust residue if needed */
+	parport_ip32_set_mode(p, ECR_MODE_CFG);
+	cnfga = readb(priv->regs.cnfgA);
+	if (!(cnfga & CNFGA_nBYTEINTRANS)) {
+		pr_debug1(PPIP32 "%s: cnfgA contains 0x%02x\n",
+			  p->name, cnfga);
+		pr_debug1(PPIP32 "%s: Accounting for extra byte\n",
+			  p->name);
+		residue++;
+	}
+
+	/* Don't care about partial PWords since we do not support
+	 * PWord != 1 byte. */
+
+	/* Back to forward PS2 mode. */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	parport_ip32_data_forward(p);
+
+	return residue;
+}
+
+/**
+ * parport_ip32_compat_write_data - write a block of data in SPP mode
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ * @flags:	ignored
+ */
+static size_t parport_ip32_compat_write_data(struct parport *p,
+					     const void *buf, size_t len,
+					     int flags)
+{
+	static unsigned int ready_before = 1;
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	struct parport * const physport = p->physport;
+	size_t written = 0;
+
+	/* Special case: a timeout of zero means we cannot call schedule().
+	 * Also if O_NONBLOCK is set then use the default implementation. */
+	if (physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+		return parport_ieee1284_write_compat(p, buf, len, flags);
+
+	/* Reset FIFO, go in forward mode, and disable ackIntEn */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+	parport_ip32_data_forward(p);
+	parport_ip32_disable_irq(p);
+	parport_ip32_set_mode(p, ECR_MODE_PPF);
+	physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+	/* Wait for peripheral to become ready */
+	if (parport_wait_peripheral(p, DSR_nBUSY | DSR_nFAULT,
+				       DSR_nBUSY | DSR_nFAULT)) {
+		/* Avoid to flood the logs */
+		if (ready_before)
+			printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
+			       p->name, __func__);
+		ready_before = 0;
+		goto stop;
+	}
+	ready_before = 1;
+
+	written = parport_ip32_fifo_write_block(p, buf, len);
+
+	/* Wait FIFO to empty.  Timeout is proportional to FIFO_depth.  */
+	parport_ip32_drain_fifo(p, physport->cad->timeout * priv->fifo_depth);
+
+	/* Check for a potential residue */
+	written -= parport_ip32_get_fifo_residue(p, ECR_MODE_PPF);
+
+	/* Then, wait for BUSY to get low. */
+	if (parport_wait_peripheral(p, DSR_nBUSY, DSR_nBUSY))
+		printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n",
+		       p->name, __func__);
+
+stop:
+	/* Reset FIFO */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return written;
+}
+
+/*
+ * FIXME - Insert here parport_ip32_ecp_read_data().
+ */
+
+/**
+ * parport_ip32_ecp_write_data - write a block of data in ECP mode
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ * @flags:	ignored
+ */
+static size_t parport_ip32_ecp_write_data(struct parport *p,
+					  const void *buf, size_t len,
+					  int flags)
+{
+	static unsigned int ready_before = 1;
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	struct parport * const physport = p->physport;
+	size_t written = 0;
+
+	/* Special case: a timeout of zero means we cannot call schedule().
+	 * Also if O_NONBLOCK is set then use the default implementation. */
+	if (physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+		return parport_ieee1284_ecp_write_data(p, buf, len, flags);
+
+	/* Negotiate to forward mode if necessary. */
+	if (physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
+		/* Event 47: Set nInit high. */
+		parport_ip32_frob_control(p, DCR_nINIT | DCR_AUTOFD,
+					     DCR_nINIT | DCR_AUTOFD);
+
+		/* Event 49: PError goes high. */
+		if (parport_wait_peripheral(p, DSR_PERROR, DSR_PERROR)) {
+			printk(KERN_DEBUG PPIP32 "%s: PError timeout in %s",
+			       p->name, __func__);
+			physport->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
+			return 0;
+		}
+	}
+
+	/* Reset FIFO, go in forward mode, and disable ackIntEn */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+	parport_ip32_data_forward(p);
+	parport_ip32_disable_irq(p);
+	parport_ip32_set_mode(p, ECR_MODE_ECP);
+	physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+	/* Wait for peripheral to become ready */
+	if (parport_wait_peripheral(p, DSR_nBUSY | DSR_nFAULT,
+				       DSR_nBUSY | DSR_nFAULT)) {
+		/* Avoid to flood the logs */
+		if (ready_before)
+			printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
+			       p->name, __func__);
+		ready_before = 0;
+		goto stop;
+	}
+	ready_before = 1;
+
+	written = parport_ip32_fifo_write_block(p, buf, len);
+
+	/* Wait FIFO to empty.  Timeout is proportional to FIFO_depth.  */
+	parport_ip32_drain_fifo(p, physport->cad->timeout * priv->fifo_depth);
+
+	/* Check for a potential residue */
+	written -= parport_ip32_get_fifo_residue(p, ECR_MODE_ECP);
+
+	/* Then, wait for BUSY to get low. */
+	if (parport_wait_peripheral(p, DSR_nBUSY, DSR_nBUSY))
+		printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n",
+		       p->name, __func__);
+
+stop:
+	/* Reset FIFO */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return written;
+}
+
+/*
+ * FIXME - Insert here parport_ip32_ecp_write_addr().
+ */
+
+/*--- Default parport operations ---------------------------------------*/
+
+static __initdata struct parport_operations parport_ip32_ops = {
+	.write_data		= parport_ip32_write_data,
+	.read_data		= parport_ip32_read_data,
+
+	.write_control		= parport_ip32_write_control,
+	.read_control		= parport_ip32_read_control,
+	.frob_control		= parport_ip32_frob_control,
+
+	.read_status		= parport_ip32_read_status,
+
+	.enable_irq		= parport_ip32_enable_irq,
+	.disable_irq		= parport_ip32_disable_irq,
+
+	.data_forward		= parport_ip32_data_forward,
+	.data_reverse		= parport_ip32_data_reverse,
+
+	.init_state		= parport_ip32_init_state,
+	.save_state		= parport_ip32_save_state,
+	.restore_state		= parport_ip32_restore_state,
+
+	.epp_write_data		= parport_ieee1284_epp_write_data,
+	.epp_read_data		= parport_ieee1284_epp_read_data,
+	.epp_write_addr		= parport_ieee1284_epp_write_addr,
+	.epp_read_addr		= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data		= parport_ieee1284_ecp_write_data,
+	.ecp_read_data		= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr		= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner			= THIS_MODULE,
+};
+
+/*--- Device detection -------------------------------------------------*/
+
+/**
+ * parport_ip32_ecp_supported - check for an ECP port
+ * @p:		pointer to the &parport structure
+ *
+ * Returns 1 if an ECP port is found, and 0 otherwise.  This function actually
+ * checks if an Extended Control Register seems to be present.  On successful
+ * return, the port is placed in SPP mode.
+ */
+static __init unsigned int parport_ip32_ecp_supported(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	unsigned int ecr;
+
+	ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
+	writeb(ecr, priv->regs.ecr);
+	if (readb(priv->regs.ecr) != (ecr | ECR_F_EMPTY))
+		goto fail;
+
+	pr_probe(p, "Found working ECR register\n");
+	parport_ip32_set_mode(p, ECR_MODE_SPP);
+	parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+	return 1;
+
+fail:
+	pr_probe(p, "ECR register not found\n");
+	return 0;
+}
+
+/**
+ * parport_ip32_fifo_supported - check for FIFO parameters
+ * @p:		pointer to the &parport structure
+ *
+ * Check for FIFO parameters of an Extended Capabilities Port.  Returns 1 on
+ * success, and 0 otherwise.  Adjust FIFO parameters in the parport structure.
+ * On return, the port is placed in SPP mode.
+ */
+static __init unsigned int parport_ip32_fifo_supported(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	unsigned int configa, configb;
+	unsigned int pword;
+	unsigned int i;
+
+	/* Configuration mode */
+	parport_ip32_set_mode(p, ECR_MODE_CFG);
+	configa = readb(priv->regs.cnfgA);
+	configb = readb(priv->regs.cnfgB);
+
+	/* Find out PWord size */
+	switch (configa & CNFGA_ID_MASK) {
+	case CNFGA_ID_8:
+		pword = 1;
+		break;
+	case CNFGA_ID_16:
+		pword = 2;
+		break;
+	case CNFGA_ID_32:
+		pword = 4;
+		break;
+	default:
+		pr_probe(p, "Unknown implementation ID: 0x%0x\n",
+			 (configa & CNFGA_ID_MASK) >> CNFGA_ID_SHIFT);
+		goto fail;
+		break;
+	}
+	if (pword != 1) {
+		pr_probe(p, "Unsupported PWord size: %u\n", pword);
+		goto fail;
+	}
+	priv->pword = pword;
+	pr_probe(p, "PWord is %u bits\n", 8 * priv->pword);
+
+	/* Check for compression support */
+	writeb(configb | CNFGB_COMPRESS, priv->regs.cnfgB);
+	if (readb(priv->regs.cnfgB) & CNFGB_COMPRESS)
+		pr_probe(p, "Hardware compression detected (unsupported)\n");
+	writeb(configb & ~CNFGB_COMPRESS, priv->regs.cnfgB);
+
+	/* Reset FIFO and go in test mode (no interrupt, no DMA) */
+	parport_ip32_set_mode(p, ECR_MODE_TST);
+
+	/* FIFO must be empty now */
+	if (!(readb(priv->regs.ecr) & ECR_F_EMPTY)) {
+		pr_probe(p, "FIFO not reset\n");
+		goto fail;
+	}
+
+	/* Find out FIFO depth. */
+	priv->fifo_depth = 0;
+	for (i = 0; i < 1024; i++) {
+		if (readb(priv->regs.ecr) & ECR_F_FULL) {
+			/* FIFO full */
+			priv->fifo_depth = i;
+			break;
+		}
+		writeb((u8)i, priv->regs.fifo);
+	}
+	if (i >= 1024) {
+		pr_probe(p, "Can't fill FIFO\n");
+		goto fail;
+	}
+	if (!priv->fifo_depth) {
+		pr_probe(p, "Can't get FIFO depth\n");
+		goto fail;
+	}
+	pr_probe(p, "FIFO is %u PWords deep\n", priv->fifo_depth);
+
+	/* Enable interrupts */
+	parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);
+
+	/* Find out writeIntrThreshold: number of PWords we know we can write
+	 * if we get an interrupt. */
+	priv->writeIntrThreshold = 0;
+	for (i = 0; i < priv->fifo_depth; i++) {
+		if (readb(priv->regs.fifo) != (u8)i) {
+			pr_probe(p, "Invalid data in FIFO\n");
+			goto fail;
+		}
+		if (!priv->writeIntrThreshold
+		    && readb(priv->regs.ecr) & ECR_SERVINTR)
+			/* writeIntrThreshold reached */
+			priv->writeIntrThreshold = i + 1;
+		if (i + 1 < priv->fifo_depth
+		    && readb(priv->regs.ecr) & ECR_F_EMPTY) {
+			/* FIFO empty before the last byte? */
+			pr_probe(p, "Data lost in FIFO\n");
+			goto fail;
+		}
+	}
+	if (!priv->writeIntrThreshold) {
+		pr_probe(p, "Can't get writeIntrThreshold\n");
+		goto fail;
+	}
+	pr_probe(p, "writeIntrThreshold is %u\n", priv->writeIntrThreshold);
+
+	/* FIFO must be empty now */
+	if (!(readb(priv->regs.ecr) & ECR_F_EMPTY)) {
+		pr_probe(p, "Can't empty FIFO\n");
+		goto fail;
+	}
+
+	/* Reset FIFO */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	/* Set reverse direction (must be in PS2 mode) */
+	parport_ip32_data_reverse(p);
+	/* Test FIFO, no interrupt, no DMA */
+	parport_ip32_set_mode(p, ECR_MODE_TST);
+	/* Enable interrupts */
+	parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);
+
+	/* Find out readIntrThreshold: number of PWords we can read if we get
+	 * an interrupt. */
+	priv->readIntrThreshold = 0;
+	for (i = 0; i < priv->fifo_depth; i++) {
+		writeb(0xaa, priv->regs.fifo);
+		if (readb(priv->regs.ecr) & ECR_SERVINTR) {
+			/* readIntrThreshold reached */
+			priv->readIntrThreshold = i + 1;
+			break;
+		}
+	}
+	if (!priv->readIntrThreshold) {
+		pr_probe(p, "Can't get readIntrThreshold\n");
+		goto fail;
+	}
+	pr_probe(p, "readIntrThreshold is %u\n", priv->readIntrThreshold);
+
+	/* Reset ECR */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	parport_ip32_data_forward(p);
+	parport_ip32_set_mode(p, ECR_MODE_SPP);
+	return 1;
+
+fail:
+	priv->fifo_depth = 0;
+	parport_ip32_set_mode(p, ECR_MODE_SPP);
+	return 0;
+}
+
+/*--- Initialization code ----------------------------------------------*/
+
+/**
+ * parport_ip32_make_isa_registers - compute (ISA) register addresses
+ * @regs:	pointer to &struct parport_ip32_regs to fill
+ * @base:	base address of standard and EPP registers
+ * @base_hi:	base address of ECP registers
+ * @regshift:	how much to shift register offset by
+ *
+ * Compute register addresses, according to the ISA standard.  The addresses
+ * of the standard and EPP registers are computed from address @base.  The
+ * addresses of the ECP registers are computed from address @base_hi.
+ */
+static void __init
+parport_ip32_make_isa_registers(struct parport_ip32_regs *regs,
+				void __iomem *base, void __iomem *base_hi,
+				unsigned int regshift)
+{
+#define r_base(offset)    ((u8 __iomem *)base    + ((offset) << regshift))
+#define r_base_hi(offset) ((u8 __iomem *)base_hi + ((offset) << regshift))
+	*regs = (struct parport_ip32_regs){
+		.data		= r_base(0),
+		.dsr		= r_base(1),
+		.dcr		= r_base(2),
+		.eppAddr	= r_base(3),
+		.eppData0	= r_base(4),
+		.eppData1	= r_base(5),
+		.eppData2	= r_base(6),
+		.eppData3	= r_base(7),
+		.ecpAFifo	= r_base(0),
+		.fifo		= r_base_hi(0),
+		.cnfgA		= r_base_hi(0),
+		.cnfgB		= r_base_hi(1),
+		.ecr		= r_base_hi(2)
+	};
+#undef r_base_hi
+#undef r_base
+}
+
+/**
+ * parport_ip32_probe_port - probe and register IP32 built-in parallel port
+ *
+ * Returns the new allocated &parport structure.  On error, an error code is
+ * encoded in return value with the ERR_PTR function.
+ */
+static __init struct parport *parport_ip32_probe_port(void)
+{
+	struct parport_ip32_regs regs;
+	struct parport_ip32_private *priv = NULL;
+	struct parport_operations *ops = NULL;
+	struct parport *p = NULL;
+	int err;
+
+	parport_ip32_make_isa_registers(&regs, &mace->isa.parallel,
+					&mace->isa.ecp1284, 8 /* regshift */);
+
+	ops = kmalloc(sizeof(struct parport_operations), GFP_KERNEL);
+	priv = kmalloc(sizeof(struct parport_ip32_private), GFP_KERNEL);
+	p = parport_register_port(0, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, ops);
+	if (ops == NULL || priv == NULL || p == NULL) {
+		err = -ENOMEM;
+		goto fail;
+	}
+	p->base = MACE_BASE + offsetof(struct sgi_mace, isa.parallel);
+	p->base_hi = MACE_BASE + offsetof(struct sgi_mace, isa.ecp1284);
+	p->private_data = priv;
+
+	*ops = parport_ip32_ops;
+	*priv = (struct parport_ip32_private){
+		.regs			= regs,
+		.dcr_writable		= DCR_DIR | DCR_SELECT | DCR_nINIT |
+					  DCR_AUTOFD | DCR_STROBE,
+		.irq_mode		= PARPORT_IP32_IRQ_FWD,
+	};
+	init_completion(&priv->irq_complete);
+
+	/* Probe port. */
+	if (!parport_ip32_ecp_supported(p)) {
+		err = -ENODEV;
+		goto fail;
+	}
+	parport_ip32_dump_state(p, "begin init", 0);
+
+	/* We found what looks like a working ECR register.  Simply assume
+	 * that all modes are correctly supported.  Enable basic modes. */
+	p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
+	p->modes |= PARPORT_MODE_TRISTATE;
+
+	if (!parport_ip32_fifo_supported(p)) {
+		printk(KERN_WARNING PPIP32
+		       "%s: error: FIFO disabled\n", p->name);
+		/* Disable hardware modes depending on a working FIFO. */
+		features &= ~PARPORT_IP32_ENABLE_SPP;
+		features &= ~PARPORT_IP32_ENABLE_ECP;
+		/* DMA is not needed if FIFO is not supported.  */
+		features &= ~PARPORT_IP32_ENABLE_DMA;
+	}
+
+	/* Request IRQ */
+	if (features & PARPORT_IP32_ENABLE_IRQ) {
+		int irq = MACEISA_PARALLEL_IRQ;
+		if (request_irq(irq, parport_ip32_interrupt, 0, p->name, p)) {
+			printk(KERN_WARNING PPIP32
+			       "%s: error: IRQ disabled\n", p->name);
+			/* DMA cannot work without interrupts. */
+			features &= ~PARPORT_IP32_ENABLE_DMA;
+		} else {
+			pr_probe(p, "Interrupt support enabled\n");
+			p->irq = irq;
+			priv->dcr_writable |= DCR_IRQ;
+		}
+	}
+
+	/* Allocate DMA resources */
+	if (features & PARPORT_IP32_ENABLE_DMA) {
+		if (parport_ip32_dma_register())
+			printk(KERN_WARNING PPIP32
+			       "%s: error: DMA disabled\n", p->name);
+		else {
+			pr_probe(p, "DMA support enabled\n");
+			p->dma = 0; /* arbitrary value != PARPORT_DMA_NONE */
+			p->modes |= PARPORT_MODE_DMA;
+		}
+	}
+
+	if (features & PARPORT_IP32_ENABLE_SPP) {
+		/* Enable compatibility FIFO mode */
+		p->ops->compat_write_data = parport_ip32_compat_write_data;
+		p->modes |= PARPORT_MODE_COMPAT;
+		pr_probe(p, "Hardware support for SPP mode enabled\n");
+	}
+	if (features & PARPORT_IP32_ENABLE_EPP) {
+		/* Set up access functions to use EPP hardware. */
+		p->ops->epp_read_data = parport_ip32_epp_read_data;
+		p->ops->epp_write_data = parport_ip32_epp_write_data;
+		p->ops->epp_read_addr = parport_ip32_epp_read_addr;
+		p->ops->epp_write_addr = parport_ip32_epp_write_addr;
+		p->modes |= PARPORT_MODE_EPP;
+		pr_probe(p, "Hardware support for EPP mode enabled\n");
+	}
+	if (features & PARPORT_IP32_ENABLE_ECP) {
+		/* Enable ECP FIFO mode */
+		p->ops->ecp_write_data = parport_ip32_ecp_write_data;
+		/* FIXME - not implemented */
+/*		p->ops->ecp_read_data  = parport_ip32_ecp_read_data; */
+/*		p->ops->ecp_write_addr = parport_ip32_ecp_write_addr; */
+		p->modes |= PARPORT_MODE_ECP;
+		pr_probe(p, "Hardware support for ECP mode enabled\n");
+	}
+
+	/* Initialize the port with sensible values */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+	parport_ip32_data_forward(p);
+	parport_ip32_disable_irq(p);
+	parport_ip32_write_data(p, 0x00);
+	parport_ip32_dump_state(p, "end init", 0);
+
+	/* Print out what we found */
+	printk(KERN_INFO "%s: SGI IP32 at 0x%lx (0x%lx)",
+	       p->name, p->base, p->base_hi);
+	if (p->irq != PARPORT_IRQ_NONE)
+		printk(", irq %d", p->irq);
+	printk(" [");
+#define printmode(x)	if (p->modes & PARPORT_MODE_##x)		\
+				printk("%s%s", f++ ? "," : "", #x)
+	{
+		unsigned int f = 0;
+		printmode(PCSPP);
+		printmode(TRISTATE);
+		printmode(COMPAT);
+		printmode(EPP);
+		printmode(ECP);
+		printmode(DMA);
+	}
+#undef printmode
+	printk("]\n");
+
+	parport_announce_port(p);
+	return p;
+
+fail:
+	if (p)
+		parport_put_port(p);
+	kfree(priv);
+	kfree(ops);
+	return ERR_PTR(err);
+}
+
+/**
+ * parport_ip32_unregister_port - unregister a parallel port
+ * @p:		pointer to the &struct parport
+ *
+ * Unregisters a parallel port and free previously allocated resources
+ * (memory, IRQ, ...).
+ */
+static __exit void parport_ip32_unregister_port(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	struct parport_operations *ops = p->ops;
+
+	parport_remove_port(p);
+	if (p->modes & PARPORT_MODE_DMA)
+		parport_ip32_dma_unregister();
+	if (p->irq != PARPORT_IRQ_NONE)
+		free_irq(p->irq, p);
+	parport_put_port(p);
+	kfree(priv);
+	kfree(ops);
+}
+
+/**
+ * parport_ip32_init - module initialization function
+ */
+static int __init parport_ip32_init(void)
+{
+	pr_info(PPIP32 "SGI IP32 built-in parallel port driver v0.6\n");
+	pr_debug1(PPIP32 "Compiled on %s, %s\n", __DATE__, __TIME__);
+	this_port = parport_ip32_probe_port();
+	return IS_ERR(this_port) ? PTR_ERR(this_port) : 0;
+}
+
+/**
+ * parport_ip32_exit - module termination function
+ */
+static void __exit parport_ip32_exit(void)
+{
+	parport_ip32_unregister_port(this_port);
+}
+
+/*--- Module stuff -----------------------------------------------------*/
+
+MODULE_AUTHOR("Arnaud Giersch <arnaud.giersch@free.fr>");
+MODULE_DESCRIPTION("SGI IP32 built-in parallel port driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.6");		/* update in parport_ip32_init() too */
+
+module_init(parport_ip32_init);
+module_exit(parport_ip32_exit);
+
+module_param(verbose_probing, bool, S_IRUGO);
+MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialization");
+
+module_param(features, uint, S_IRUGO);
+MODULE_PARM_DESC(features,
+		 "Bit mask of features to enable"
+		 ", bit 0: IRQ support"
+		 ", bit 1: DMA support"
+		 ", bit 2: hardware SPP mode"
+		 ", bit 3: hardware EPP mode"
+		 ", bit 4: hardware ECP mode");
+
+/*--- Inform (X)Emacs about preferred coding style ---------------------*/
+/*
+ * Local Variables:
+ * mode: c
+ * c-file-style: "linux"
+ * indent-tabs-mode: t
+ * tab-width: 8
+ * fill-column: 78
+ * ispell-local-dictionary: "american"
+ * End:
+ */
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index 76dd077e3184..166de3507780 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -329,9 +329,9 @@ static int __devinit parport_register (struct pci_dev *dev,
 
 		if (priv->num_par == ARRAY_SIZE (priv->port)) {
 			printk (KERN_WARNING
-				"parport_serial: %s: only %u parallel ports "
+				"parport_serial: %s: only %zu parallel ports "
 				"supported (%d reported)\n", pci_name (dev),
-				ARRAY_SIZE (priv->port), card->numports);
+				ARRAY_SIZE(priv->port), card->numports);
 			break;
 		}
 
diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c
index b62aee8de3cb..ea83b70e0de2 100644
--- a/drivers/parport/probe.c
+++ b/drivers/parport/probe.c
@@ -199,7 +199,7 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
 
 		if (port->physport->ieee1284.phase != IEEE1284_PH_HBUSY_DAVAIL) {
 			if (belen != len) {
-				printk (KERN_DEBUG "%s: Device ID was %d bytes"
+				printk (KERN_DEBUG "%s: Device ID was %zd bytes"
 					" while device told it would be %d"
 					" bytes\n",
 					port->name, len, belen);
@@ -214,7 +214,7 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
 		if (buffer[len-1] == ';') {
  			printk (KERN_DEBUG "%s: Device ID reading stopped"
 				" before device told data not available. "
-				"Current idlen %d of %d, len bytes %02X %02X\n",
+				"Current idlen %u of %u, len bytes %02X %02X\n",
 				port->name, current_idlen, numidlens,
 				length[0], length[1]);
 			goto done;
diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig
index 6f50cc9323d9..6912399d0937 100644
--- a/drivers/s390/block/Kconfig
+++ b/drivers/s390/block/Kconfig
@@ -55,13 +55,21 @@ config DASD_DIAG
 	  Disks under VM.  If you are not running under VM or unsure what it is,
 	  say "N".
 
+config DASD_EER
+	tristate "Extended error reporting (EER)"
+	depends on DASD
+	help
+	  This driver provides a character device interface to the
+          DASD extended error reporting. This is only needed if you want to
+          use applications written for the EER facility.
+
 config DASD_CMB
 	tristate "Compatibility interface for DASD channel measurement blocks"
 	depends on DASD
 	help
-	  This driver provides an additional interface to the channel measurement
-	  facility, which is normally accessed though sysfs, with a set of
-	  ioctl functions specific to the dasd driver.
+	  This driver provides an additional interface to the channel
+          measurement facility, which is normally accessed though sysfs, with
+          a set of ioctl functions specific to the dasd driver.
 	  This is only needed if you want to use applications written for
 	  linux-2.4 dasd channel measurement facility interface.
 
diff --git a/drivers/s390/block/Makefile b/drivers/s390/block/Makefile
index 58c6780134f7..0c0d871e8f51 100644
--- a/drivers/s390/block/Makefile
+++ b/drivers/s390/block/Makefile
@@ -5,6 +5,7 @@
 dasd_eckd_mod-objs := dasd_eckd.o dasd_3990_erp.o dasd_9343_erp.o
 dasd_fba_mod-objs  := dasd_fba.o dasd_3370_erp.o dasd_9336_erp.o
 dasd_diag_mod-objs := dasd_diag.o
+dasd_eer_mod-objs := dasd_eer.o
 dasd_mod-objs      := dasd.o dasd_ioctl.o dasd_proc.o dasd_devmap.o \
 			dasd_genhd.o dasd_erp.o
 
@@ -13,5 +14,6 @@ obj-$(CONFIG_DASD_DIAG) += dasd_diag_mod.o
 obj-$(CONFIG_DASD_ECKD) += dasd_eckd_mod.o
 obj-$(CONFIG_DASD_FBA)  += dasd_fba_mod.o
 obj-$(CONFIG_DASD_CMB)  += dasd_cmb.o
+obj-$(CONFIG_DASD_EER)  += dasd_eer.o
 obj-$(CONFIG_BLK_DEV_XPRAM) += xpram.o
 obj-$(CONFIG_DCSSBLK) += dcssblk.o
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index abdf1ee633e7..08c88fcd8963 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/buffer_head.h>
 #include <linux/hdreg.h>
+#include <linux/notifier.h>
 
 #include <asm/ccwdev.h>
 #include <asm/ebcdic.h>
@@ -57,6 +58,7 @@ static void dasd_int_handler(struct ccw_device *, unsigned long, struct irb *);
 static void dasd_flush_ccw_queue(struct dasd_device *, int);
 static void dasd_tasklet(struct dasd_device *);
 static void do_kick_device(void *data);
+static void dasd_disable_eer(struct dasd_device *device);
 
 /*
  * SECTION: Operations on the device structure.
@@ -151,6 +153,8 @@ dasd_state_new_to_known(struct dasd_device *device)
 static inline void
 dasd_state_known_to_new(struct dasd_device * device)
 {
+	/* disable extended error reporting for this device */
+	dasd_disable_eer(device);
 	/* Forget the discipline information. */
 	device->discipline = NULL;
 	device->state = DASD_STATE_NEW;
@@ -867,6 +871,9 @@ dasd_handle_state_change_pending(struct dasd_device *device)
 	struct dasd_ccw_req *cqr;
 	struct list_head *l, *n;
 
+	/* first of all call extended error reporting */
+	dasd_write_eer_trigger(DASD_EER_STATECHANGE, device, NULL);
+
 	device->stopped &= ~DASD_STOPPED_PENDING;
 
         /* restart all 'running' IO on queue */
@@ -1086,6 +1093,19 @@ restart:
 			}
 			goto restart;
 		}
+
+		/* first of all call extended error reporting */
+		if (device->eer && cqr->status == DASD_CQR_FAILED) {
+			dasd_write_eer_trigger(DASD_EER_FATALERROR,
+					       device, cqr);
+
+			/* restart request  */
+			cqr->status = DASD_CQR_QUEUED;
+			cqr->retries = 255;
+			device->stopped |= DASD_STOPPED_QUIESCE;
+			goto restart;
+		}
+
 		/* Process finished ERP request. */
 		if (cqr->refers) {
 			__dasd_process_erp(device, cqr);
@@ -1223,7 +1243,8 @@ __dasd_start_head(struct dasd_device * device)
 	cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, list);
         /* check FAILFAST */
 	if (device->stopped & ~DASD_STOPPED_PENDING &&
-	    test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags)) {
+	    test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags) &&
+	    (!device->eer)) {
 		cqr->status = DASD_CQR_FAILED;
 		dasd_schedule_bh(device);
 	}
@@ -1965,6 +1986,9 @@ dasd_generic_notify(struct ccw_device *cdev, int event)
 	switch (event) {
 	case CIO_GONE:
 	case CIO_NO_PATH:
+		/* first of all call extended error reporting */
+		dasd_write_eer_trigger(DASD_EER_NOPATH, device, NULL);
+
 		if (device->state < DASD_STATE_BASIC)
 			break;
 		/* Device is active. We want to keep it. */
@@ -2022,6 +2046,51 @@ dasd_generic_auto_online (struct ccw_driver *dasd_discipline_driver)
 	put_driver(drv);
 }
 
+/*
+ * notifications for extended error reports
+ */
+static struct notifier_block *dasd_eer_chain;
+
+int
+dasd_register_eer_notifier(struct notifier_block *nb)
+{
+	return notifier_chain_register(&dasd_eer_chain, nb);
+}
+
+int
+dasd_unregister_eer_notifier(struct notifier_block *nb)
+{
+	return notifier_chain_unregister(&dasd_eer_chain, nb);
+}
+
+/*
+ * Notify the registered error reporting module of a problem
+ */
+void
+dasd_write_eer_trigger(unsigned int id, struct dasd_device *device,
+		       struct dasd_ccw_req *cqr)
+{
+	if (device->eer) {
+		struct dasd_eer_trigger temp;
+		temp.id = id;
+		temp.device = device;
+		temp.cqr = cqr;
+		notifier_call_chain(&dasd_eer_chain, DASD_EER_TRIGGER,
+				    (void *)&temp);
+	}
+}
+
+/*
+ * Tell the registered error reporting module to disable error reporting for
+ * a given device and to cleanup any private data structures on that device.
+ */
+static void
+dasd_disable_eer(struct dasd_device *device)
+{
+	notifier_call_chain(&dasd_eer_chain, DASD_EER_DISABLE, (void *)device);
+}
+
+
 static int __init
 dasd_init(void)
 {
@@ -2103,6 +2172,11 @@ EXPORT_SYMBOL_GPL(dasd_generic_set_online);
 EXPORT_SYMBOL_GPL(dasd_generic_set_offline);
 EXPORT_SYMBOL_GPL(dasd_generic_auto_online);
 
+EXPORT_SYMBOL(dasd_register_eer_notifier);
+EXPORT_SYMBOL(dasd_unregister_eer_notifier);
+EXPORT_SYMBOL(dasd_write_eer_trigger);
+
+
 /*
  * Overrides for Emacs so that we follow Linus's tabbing style.
  * Emacs will notice this stuff at the end of the file and automatically
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index 4ee0f934e325..c811380b9079 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -1108,6 +1108,9 @@ dasd_3990_handle_env_data(struct dasd_ccw_req * erp, char *sense)
 		case 0x0B:
 			DEV_MESSAGE(KERN_WARNING, device, "%s",
 				    "FORMAT F - Volume is suspended duplex");
+			/* call extended error reporting (EER) */
+			dasd_write_eer_trigger(DASD_EER_PPRCSUSPEND, device,
+					       erp->refers);
 			break;
 		case 0x0C:
 			DEV_MESSAGE(KERN_WARNING, device, "%s",
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index bc3823d35223..e15dd7978050 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -29,6 +29,7 @@
 #define DASD_ECKD_CCW_PSF		 0x27
 #define DASD_ECKD_CCW_RSSD		 0x3e
 #define DASD_ECKD_CCW_LOCATE_RECORD	 0x47
+#define DASD_ECKD_CCW_SNSS               0x54
 #define DASD_ECKD_CCW_DEFINE_EXTENT	 0x63
 #define DASD_ECKD_CCW_WRITE_MT		 0x85
 #define DASD_ECKD_CCW_READ_MT		 0x86
diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
new file mode 100644
index 000000000000..f70cd7716b24
--- /dev/null
+++ b/drivers/s390/block/dasd_eer.c
@@ -0,0 +1,1090 @@
+/*
+ *	character device driver for extended error reporting
+ *
+ *
+ *	Copyright (C) 2005 IBM Corporation
+ *	extended error reporting for DASD ECKD devices
+ *	Author(s): Stefan Weinhuber <wein@de.ibm.com>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/workqueue.h>
+#include <linux/poll.h>
+#include <linux/notifier.h>
+
+#include <asm/uaccess.h>
+#include <asm/semaphore.h>
+#include <asm/atomic.h>
+#include <asm/ebcdic.h>
+
+#include "dasd_int.h"
+#include "dasd_eckd.h"
+
+
+MODULE_LICENSE("GPL");
+
+MODULE_AUTHOR("Stefan Weinhuber <wein@de.ibm.com>");
+MODULE_DESCRIPTION("DASD extended error reporting module");
+
+
+#ifdef PRINTK_HEADER
+#undef PRINTK_HEADER
+#endif				/* PRINTK_HEADER */
+#define PRINTK_HEADER "dasd(eer):"
+
+
+
+
+
+/*****************************************************************************/
+/*      the internal buffer                                                  */
+/*****************************************************************************/
+
+/*
+ * The internal buffer is meant to store obaque blobs of data, so it doesn't
+ * know of higher level concepts like triggers.
+ * It consists of a number of pages that are used as a ringbuffer. Each data
+ * blob is stored in a simple record that consists of an integer, which
+ * contains the size of the following data, and the data bytes themselfes.
+ *
+ * To allow for multiple independent readers we create one internal buffer
+ * each time the device is opened and destroy the buffer when the file is
+ * closed again.
+ *
+ * One record can be written to a buffer by using the functions
+ * - dasd_eer_start_record (one time per record to write the size to the buffer
+ *                          and reserve the space for the data)
+ * - dasd_eer_write_buffer (one or more times per record to write the data)
+ * The data can be written in several steps but you will have to compute
+ * the total size up front for the invocation of dasd_eer_start_record.
+ * If the ringbuffer is full, dasd_eer_start_record will remove the required
+ * number of old records.
+ *
+ * A record is typically read in two steps, first read the integer that
+ * specifies the size of the following data, then read the data.
+ * Both can be done by
+ * - dasd_eer_read_buffer
+ *
+ * For all mentioned functions you need to get the bufferlock first and keep it
+ * until a complete record is written or read.
+ */
+
+
+/*
+ * Alle information necessary to keep track of an internal buffer is kept in
+ * a struct eerbuffer. The buffer specific to a file pointer is strored in
+ * the private_data field of that file. To be able to write data to all
+ * existing buffers, each buffer is also added to the bufferlist.
+ * If the user doesn't want to read a complete record in one go, we have to
+ * keep track of the rest of the record. residual stores the number of bytes
+ * that are still to deliver. If the rest of the record is invalidated between
+ * two reads then residual will be set to -1 so that the next read will fail.
+ * All entries in the eerbuffer structure are protected with the bufferlock.
+ * To avoid races between writing to a buffer on the one side and creating
+ * and destroying buffers on the other side, the bufferlock must also be used
+ * to protect the bufferlist.
+ */
+
+struct eerbuffer {
+	struct list_head list;
+	char **buffer;
+	int buffersize;
+	int buffer_page_count;
+	int head;
+        int tail;
+	int residual;
+};
+
+LIST_HEAD(bufferlist);
+
+static spinlock_t bufferlock = SPIN_LOCK_UNLOCKED;
+
+DECLARE_WAIT_QUEUE_HEAD(dasd_eer_read_wait_queue);
+
+/*
+ * How many free bytes are available on the buffer.
+ * needs to be called with bufferlock held
+ */
+static int
+dasd_eer_get_free_bytes(struct eerbuffer *eerb)
+{
+	if (eerb->head < eerb->tail) {
+		return eerb->tail - eerb->head - 1;
+	} else
+		return eerb->buffersize - eerb->head + eerb->tail -1;
+}
+
+/*
+ * How many bytes of buffer space are used.
+ * needs to be called with bufferlock held
+ */
+static int
+dasd_eer_get_filled_bytes(struct eerbuffer *eerb)
+{
+
+	if (eerb->head >= eerb->tail) {
+		return eerb->head - eerb->tail;
+	} else
+		return eerb->buffersize - eerb->tail + eerb->head;
+}
+
+/*
+ * The dasd_eer_write_buffer function just copies count bytes of data
+ * to the buffer. Make sure to call dasd_eer_start_record first, to
+ * make sure that enough free space is available.
+ * needs to be called with bufferlock held
+ */
+static void
+dasd_eer_write_buffer(struct eerbuffer *eerb, int count, char *data)
+{
+
+	unsigned long headindex,localhead;
+	unsigned long rest, len;
+	char *nextdata;
+
+	nextdata = data;
+	rest = count;
+	while (rest > 0) {
+ 		headindex = eerb->head / PAGE_SIZE;
+ 		localhead = eerb->head % PAGE_SIZE;
+		len = min(rest, (PAGE_SIZE - localhead));
+		memcpy(eerb->buffer[headindex]+localhead, nextdata, len);
+		nextdata += len;
+		rest -= len;
+		eerb->head += len;
+		if ( eerb->head == eerb->buffersize )
+			eerb->head = 0; /* wrap around */
+		if (eerb->head > eerb->buffersize) {
+			MESSAGE(KERN_ERR, "%s", "runaway buffer head.");
+			BUG();
+		}
+	}
+}
+
+/*
+ * needs to be called with bufferlock held
+ */
+static int
+dasd_eer_read_buffer(struct eerbuffer *eerb, int count, char *data)
+{
+
+	unsigned long tailindex,localtail;
+	unsigned long rest, len, finalcount;
+	char *nextdata;
+
+	finalcount = min(count, dasd_eer_get_filled_bytes(eerb));
+	nextdata = data;
+	rest = finalcount;
+	while (rest > 0) {
+ 		tailindex = eerb->tail / PAGE_SIZE;
+ 		localtail = eerb->tail % PAGE_SIZE;
+		len = min(rest, (PAGE_SIZE - localtail));
+		memcpy(nextdata, eerb->buffer[tailindex]+localtail, len);
+		nextdata += len;
+		rest -= len;
+		eerb->tail += len;
+		if ( eerb->tail == eerb->buffersize )
+			eerb->tail = 0; /* wrap around */
+		if (eerb->tail > eerb->buffersize) {
+			MESSAGE(KERN_ERR, "%s", "runaway buffer tail.");
+			BUG();
+		}
+	}
+	return finalcount;
+}
+
+/*
+ * Whenever you want to write a blob of data to the internal buffer you
+ * have to start by using this function first. It will write the number
+ * of bytes that will be written to the buffer. If necessary it will remove
+ * old records to make room for the new one.
+ * needs to be called with bufferlock held
+ */
+static int
+dasd_eer_start_record(struct eerbuffer *eerb, int count)
+{
+	int tailcount;
+	if (count + sizeof(count) > eerb->buffersize)
+		return -ENOMEM;
+	while (dasd_eer_get_free_bytes(eerb) < count + sizeof(count)) {
+		if (eerb->residual > 0) {
+			eerb->tail += eerb->residual;
+			if (eerb->tail >= eerb->buffersize)
+				eerb->tail -= eerb->buffersize;
+			eerb->residual = -1;
+		}
+		dasd_eer_read_buffer(eerb, sizeof(tailcount),
+				     (char*)(&tailcount));
+		eerb->tail += tailcount;
+		if (eerb->tail >= eerb->buffersize)
+			eerb->tail -= eerb->buffersize;
+	}
+	dasd_eer_write_buffer(eerb, sizeof(count), (char*)(&count));
+
+	return 0;
+};
+
+/*
+ * release pages that are not used anymore
+ */
+static void
+dasd_eer_free_buffer_pages(char **buf, int no_pages)
+{
+	int i;
+
+	for (i = 0; i < no_pages; ++i) {
+		free_page((unsigned long)buf[i]);
+	}
+}
+
+/*
+ * allocate a new set of memory pages
+ */
+static int
+dasd_eer_allocate_buffer_pages(char **buf, int no_pages)
+{
+	int i;
+
+	for (i = 0; i < no_pages; ++i) {
+		buf[i] = (char *) get_zeroed_page(GFP_KERNEL);
+		if (!buf[i]) {
+			dasd_eer_free_buffer_pages(buf, i);
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+/*
+ * empty the buffer by resetting head and tail
+ * In case there is a half read data blob in the buffer, we set residual
+ * to -1 to indicate that the remainder of the blob is lost.
+ */
+static void
+dasd_eer_purge_buffer(struct eerbuffer *eerb)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&bufferlock, flags);
+	if (eerb->residual > 0)
+		eerb->residual = -1;
+	eerb->tail=0;
+	eerb->head=0;
+	spin_unlock_irqrestore(&bufferlock, flags);
+}
+
+/*
+ * set the size of the buffer, newsize is the new number of pages to be used
+ * we don't try to copy any data back an forth, so any resize will also purge
+ * the buffer
+ */
+static int
+dasd_eer_resize_buffer(struct eerbuffer *eerb, int newsize)
+{
+	int i, oldcount, reuse;
+	char **new;
+	char **old;
+	unsigned long flags;
+
+	if (newsize < 1)
+		return -EINVAL;
+	if (eerb->buffer_page_count == newsize) {
+		/* documented behaviour is that any successfull invocation
+                 * will purge all records */
+		dasd_eer_purge_buffer(eerb);
+		return 0;
+	}
+	new = kmalloc(newsize*sizeof(char*), GFP_KERNEL);
+	if (!new)
+		return -ENOMEM;
+
+	reuse=min(eerb->buffer_page_count, newsize);
+	for (i = 0; i < reuse; ++i) {
+		new[i] = eerb->buffer[i];
+	}
+	if (eerb->buffer_page_count < newsize) {
+		if (dasd_eer_allocate_buffer_pages(
+			    &new[eerb->buffer_page_count],
+			    newsize - eerb->buffer_page_count)) {
+			kfree(new);
+			return -ENOMEM;
+		}
+	}
+
+	spin_lock_irqsave(&bufferlock, flags);
+	old = eerb->buffer;
+	eerb->buffer = new;
+	if (eerb->residual > 0)
+		eerb->residual = -1;
+	eerb->tail = 0;
+	eerb->head = 0;
+	oldcount = eerb->buffer_page_count;
+	eerb->buffer_page_count = newsize;
+	spin_unlock_irqrestore(&bufferlock, flags);
+
+	if (oldcount > newsize) {
+		for (i = newsize; i < oldcount; ++i) {
+			free_page((unsigned long)old[i]);
+		}
+	}
+	kfree(old);
+
+	return 0;
+}
+
+
+/*****************************************************************************/
+/*      The extended error reporting functionality                           */
+/*****************************************************************************/
+
+/*
+ * When a DASD device driver wants to report an error, it calls the
+ * function dasd_eer_write_trigger (via a notifier mechanism) and gives the
+ * respective trigger ID as parameter.
+ * Currently there are four kinds of triggers:
+ *
+ * DASD_EER_FATALERROR:  all kinds of unrecoverable I/O problems
+ * DASD_EER_PPRCSUSPEND: PPRC was suspended
+ * DASD_EER_NOPATH:      There is no path to the device left.
+ * DASD_EER_STATECHANGE: The state of the device has changed.
+ *
+ * For the first three triggers all required information can be supplied by
+ * the caller. For these triggers a record is written by the function
+ * dasd_eer_write_standard_trigger.
+ *
+ * When dasd_eer_write_trigger is called to write a DASD_EER_STATECHANGE
+ * trigger, we have to gather the necessary sense data first. We cannot queue
+ * the necessary SNSS (sense subsystem status) request immediatly, since we
+ * are likely to run in a deadlock situation. Instead, we schedule a
+ * work_struct that calls the function dasd_eer_sense_subsystem_status to
+ * create and start an SNSS  request asynchronously.
+ *
+ * To avoid memory allocations at runtime, the necessary memory is allocated
+ * when the extended error reporting is enabled for a device (by
+ * dasd_eer_probe). There is one private eer data structure for each eer
+ * enabled DASD device. It contains memory for the work_struct, one SNSS cqr
+ * and a flags field that is used to coordinate the use of the cqr. The call
+ * to write a state change trigger can come in at any time, so we have one flag
+ * CQR_IN_USE that protects the cqr itself. When this flag indicates that the
+ * cqr is currently in use, dasd_eer_sense_subsystem_status cannot start a
+ * second request but sets the SNSS_REQUESTED flag instead.
+ *
+ * When the request is finished, the callback function dasd_eer_SNSS_cb
+ * is called. This function will invoke the function
+ * dasd_eer_write_SNSS_trigger to finally write the trigger. It will also
+ * check the SNSS_REQUESTED flag and if it is set it will call
+ * dasd_eer_sense_subsystem_status again.
+ *
+ * To avoid race conditions during the handling of the lock, the flags must
+ * be protected by the snsslock.
+ */
+
+struct dasd_eer_private {
+	struct dasd_ccw_req *cqr;
+	unsigned long flags;
+	struct work_struct worker;
+};
+
+static void dasd_eer_destroy(struct dasd_device *device,
+			     struct dasd_eer_private *eer);
+static int
+dasd_eer_write_trigger(struct dasd_eer_trigger *trigger);
+static void dasd_eer_sense_subsystem_status(void *data);
+static int dasd_eer_notify(struct notifier_block *self,
+			   unsigned long action, void *data);
+
+struct workqueue_struct *dasd_eer_workqueue;
+
+#define SNSS_DATA_SIZE 44
+static spinlock_t snsslock = SPIN_LOCK_UNLOCKED;
+
+#define DASD_EER_BUSID_SIZE 10
+struct dasd_eer_header {
+	__u32 total_size;
+	__u32 trigger;
+	__u64 tv_sec;
+	__u64 tv_usec;
+	char busid[DASD_EER_BUSID_SIZE];
+} __attribute__ ((packed));
+
+static struct notifier_block dasd_eer_nb = {
+	.notifier_call = dasd_eer_notify,
+};
+
+/*
+ * flags for use with dasd_eer_private
+ */
+#define CQR_IN_USE     0
+#define SNSS_REQUESTED 1
+
+/*
+ * This function checks if extended error reporting is available for a given
+ * dasd_device. If yes, then it creates and returns a struct dasd_eer,
+ * otherwise it returns an -EPERM error pointer.
+ */
+struct dasd_eer_private *
+dasd_eer_probe(struct dasd_device *device)
+{
+	struct dasd_eer_private *private;
+
+	if (!(device && device->discipline
+	      && !strcmp(device->discipline->name, "ECKD"))) {
+		return ERR_PTR(-EPERM);
+	}
+	/* allocate the private data structure */
+	private = (struct dasd_eer_private *)kmalloc(
+		sizeof(struct dasd_eer_private), GFP_KERNEL);
+	if (!private) {
+		return ERR_PTR(-ENOMEM);
+	}
+	INIT_WORK(&private->worker, dasd_eer_sense_subsystem_status,
+		  (void *)device);
+	private->cqr = dasd_kmalloc_request("ECKD",
+					    1 /* SNSS */ ,
+					    SNSS_DATA_SIZE ,
+					    device);
+	if (!private->cqr) {
+		kfree(private);
+		return ERR_PTR(-ENOMEM);
+	}
+	private->flags = 0;
+	return private;
+};
+
+/*
+ * If our private SNSS request is queued, remove it from the
+ * dasd ccw queue so we can free the requests memory.
+ */
+static void
+dasd_eer_dequeue_SNSS_request(struct dasd_device *device,
+			      struct dasd_eer_private *eer)
+{
+	struct list_head *lst, *nxt;
+	struct dasd_ccw_req *cqr, *erpcqr;
+	dasd_erp_fn_t erp_fn;
+
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
+	list_for_each_safe(lst, nxt, &device->ccw_queue) {
+		cqr = list_entry(lst, struct dasd_ccw_req, list);
+		/* we are looking for two kinds or requests */
+		/* first kind: our SNSS request: */
+		if (cqr == eer->cqr) {
+			if (cqr->status == DASD_CQR_IN_IO)
+				device->discipline->term_IO(cqr);
+			list_del(&cqr->list);
+			break;
+		}
+		/* second kind: ERP requests for our SNSS request */
+		if (cqr->refers) {
+			/* If this erp request chain ends in our cqr, then */
+                        /* cal the erp_postaction to clean it up  */
+			erpcqr = cqr;
+			while (erpcqr->refers) {
+				erpcqr = erpcqr->refers;
+			}
+			if (erpcqr == eer->cqr) {
+				erp_fn = device->discipline->erp_postaction(
+					 cqr);
+				erp_fn(cqr);
+			}
+			continue;
+		}
+	}
+	spin_unlock_irq(get_ccwdev_lock(device->cdev));
+}
+
+/*
+ * This function dismantles a struct dasd_eer that was created by
+ * dasd_eer_probe. Since we want to free our private data structure,
+ * we must make sure that the memory is not in use anymore.
+ * We have to flush the work queue and remove a possible SNSS request
+ * from the dasd queue.
+ */
+static void
+dasd_eer_destroy(struct dasd_device *device, struct dasd_eer_private *eer)
+{
+	flush_workqueue(dasd_eer_workqueue);
+	dasd_eer_dequeue_SNSS_request(device, eer);
+	dasd_kfree_request(eer->cqr, device);
+	kfree(eer);
+};
+
+/*
+ * enable the extended error reporting for a particular device
+ */
+static int
+dasd_eer_enable_on_device(struct dasd_device *device)
+{
+	void *eer;
+	if (!device)
+		return -ENODEV;
+	if (device->eer)
+		return 0;
+	if (!try_module_get(THIS_MODULE)) {
+		return -EINVAL;
+	}
+	eer = (void *)dasd_eer_probe(device);
+	if (IS_ERR(eer)) {
+		module_put(THIS_MODULE);
+		return PTR_ERR(eer);
+	}
+	device->eer = eer;
+	return 0;
+}
+
+/*
+ * enable the extended error reporting for a particular device
+ */
+static int
+dasd_eer_disable_on_device(struct dasd_device *device)
+{
+	struct dasd_eer_private *eer = device->eer;
+
+	if (!device)
+		return -ENODEV;
+	if (!device->eer)
+		return 0;
+	device->eer = NULL;
+	dasd_eer_destroy(device,eer);
+	module_put(THIS_MODULE);
+
+	return 0;
+}
+
+/*
+ * Set extended error reporting (eer)
+ * Note: This will be registered as a DASD ioctl, to be called on DASD devices.
+ */
+static int
+dasd_ioctl_set_eer(struct block_device *bdev, int no, long args)
+{
+	struct dasd_device *device;
+	int intval;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+	if (bdev != bdev->bd_contains)
+		/* Error-reporting is not allowed for partitions */
+		return -EINVAL;
+	if (get_user(intval, (int __user *) args))
+		return -EFAULT;
+	device =  bdev->bd_disk->private_data;
+	if (device == NULL)
+		return -ENODEV;
+
+	intval = (intval != 0);
+	DEV_MESSAGE (KERN_DEBUG, device,
+		     "set eer on device to %d", intval);
+	if (intval)
+		return dasd_eer_enable_on_device(device);
+	else
+		return dasd_eer_disable_on_device(device);
+}
+
+/*
+ * Get value of extended error reporting.
+ * Note: This will be registered as a DASD ioctl, to be called on DASD devices.
+ */
+static int
+dasd_ioctl_get_eer(struct block_device *bdev, int no, long args)
+{
+	struct dasd_device *device;
+
+	device =  bdev->bd_disk->private_data;
+	if (device == NULL)
+		return -ENODEV;
+	return put_user((device->eer != NULL), (int __user *) args);
+}
+
+/*
+ * The following function can be used for those triggers that have
+ * all necessary data available when the function is called.
+ * If the parameter cqr is not NULL, the chain of requests will be searched
+ * for valid sense data, and all valid sense data sets will be added to
+ * the triggers data.
+ */
+static int
+dasd_eer_write_standard_trigger(int trigger, struct dasd_device *device,
+				struct dasd_ccw_req *cqr)
+{
+	struct dasd_ccw_req *temp_cqr;
+	int data_size;
+	struct timeval tv;
+	struct dasd_eer_header header;
+	unsigned long flags;
+	struct eerbuffer *eerb;
+
+	/* go through cqr chain and count the valid sense data sets */
+	temp_cqr = cqr;
+	data_size = 0;
+	while (temp_cqr) {
+		if (temp_cqr->irb.esw.esw0.erw.cons)
+			data_size += 32;
+		temp_cqr = temp_cqr->refers;
+	}
+
+	header.total_size = sizeof(header) + data_size + 4; /* "EOR" */
+	header.trigger = trigger;
+	do_gettimeofday(&tv);
+	header.tv_sec = tv.tv_sec;
+	header.tv_usec = tv.tv_usec;
+	strncpy(header.busid, device->cdev->dev.bus_id, DASD_EER_BUSID_SIZE);
+
+	spin_lock_irqsave(&bufferlock, flags);
+	list_for_each_entry(eerb, &bufferlist, list) {
+		dasd_eer_start_record(eerb, header.total_size);
+		dasd_eer_write_buffer(eerb, sizeof(header), (char*)(&header));
+		temp_cqr = cqr;
+		while (temp_cqr) {
+			if (temp_cqr->irb.esw.esw0.erw.cons)
+				dasd_eer_write_buffer(eerb, 32, cqr->irb.ecw);
+			temp_cqr = temp_cqr->refers;
+		}
+		dasd_eer_write_buffer(eerb, 4,"EOR");
+	}
+	spin_unlock_irqrestore(&bufferlock, flags);
+
+	wake_up_interruptible(&dasd_eer_read_wait_queue);
+
+	return 0;
+}
+
+/*
+ * This function writes a DASD_EER_STATECHANGE trigger.
+ */
+static void
+dasd_eer_write_SNSS_trigger(struct dasd_device *device,
+			    struct dasd_ccw_req *cqr)
+{
+	int data_size;
+	int snss_rc;
+	struct timeval tv;
+	struct dasd_eer_header header;
+	unsigned long flags;
+	struct eerbuffer *eerb;
+
+	snss_rc = (cqr->status == DASD_CQR_FAILED) ? -EIO : 0;
+	if (snss_rc)
+		data_size = 0;
+	else
+		data_size = SNSS_DATA_SIZE;
+
+	header.total_size = sizeof(header) + data_size + 4; /* "EOR" */
+	header.trigger = DASD_EER_STATECHANGE;
+	do_gettimeofday(&tv);
+	header.tv_sec = tv.tv_sec;
+	header.tv_usec = tv.tv_usec;
+	strncpy(header.busid, device->cdev->dev.bus_id, DASD_EER_BUSID_SIZE);
+
+	spin_lock_irqsave(&bufferlock, flags);
+	list_for_each_entry(eerb, &bufferlist, list) {
+		dasd_eer_start_record(eerb, header.total_size);
+		dasd_eer_write_buffer(eerb, sizeof(header),(char*)(&header));
+		if (!snss_rc)
+			dasd_eer_write_buffer(eerb, SNSS_DATA_SIZE, cqr->data);
+		dasd_eer_write_buffer(eerb, 4,"EOR");
+	}
+	spin_unlock_irqrestore(&bufferlock, flags);
+
+	wake_up_interruptible(&dasd_eer_read_wait_queue);
+}
+
+/*
+ * callback function for use with SNSS request
+ */
+static void
+dasd_eer_SNSS_cb(struct dasd_ccw_req *cqr, void *data)
+{
+        struct dasd_device *device;
+	struct dasd_eer_private *private;
+	unsigned long irqflags;
+
+        device = (struct dasd_device *)data;
+	private = (struct dasd_eer_private *)device->eer;
+	dasd_eer_write_SNSS_trigger(device, cqr);
+	spin_lock_irqsave(&snsslock, irqflags);
+	if(!test_and_clear_bit(SNSS_REQUESTED, &private->flags)) {
+		clear_bit(CQR_IN_USE, &private->flags);
+		spin_unlock_irqrestore(&snsslock, irqflags);
+		return;
+	};
+	clear_bit(CQR_IN_USE, &private->flags);
+	spin_unlock_irqrestore(&snsslock, irqflags);
+	dasd_eer_sense_subsystem_status(device);
+	return;
+}
+
+/*
+ * clean a used cqr before using it again
+ */
+static void
+dasd_eer_clean_SNSS_request(struct dasd_ccw_req *cqr)
+{
+	struct ccw1 *cpaddr = cqr->cpaddr;
+	void *data = cqr->data;
+
+	memset(cqr, 0, sizeof(struct dasd_ccw_req));
+	memset(cpaddr, 0, sizeof(struct ccw1));
+	memset(data, 0, SNSS_DATA_SIZE);
+	cqr->cpaddr = cpaddr;
+	cqr->data = data;
+	strncpy((char *) &cqr->magic, "ECKD", 4);
+	ASCEBC((char *) &cqr->magic, 4);
+	set_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
+}
+
+/*
+ * build and start an SNSS request
+ * This function is called from a work queue so we have to
+ * pass the dasd_device pointer as a void pointer.
+ */
+static void
+dasd_eer_sense_subsystem_status(void *data)
+{
+	struct dasd_device *device;
+	struct dasd_eer_private *private;
+	struct dasd_ccw_req *cqr;
+	struct ccw1 *ccw;
+	unsigned long irqflags;
+
+	device = (struct dasd_device *)data;
+	private = (struct dasd_eer_private *)device->eer;
+	if (!private) /* device not eer enabled any more */
+		return;
+	cqr = private->cqr;
+	spin_lock_irqsave(&snsslock, irqflags);
+	if(test_and_set_bit(CQR_IN_USE, &private->flags)) {
+		set_bit(SNSS_REQUESTED, &private->flags);
+		spin_unlock_irqrestore(&snsslock, irqflags);
+		return;
+	};
+	spin_unlock_irqrestore(&snsslock, irqflags);
+	dasd_eer_clean_SNSS_request(cqr);
+	cqr->device = device;
+	cqr->retries = 255;
+	cqr->expires = 10 * HZ;
+
+	ccw = cqr->cpaddr;
+	ccw->cmd_code = DASD_ECKD_CCW_SNSS;
+	ccw->count = SNSS_DATA_SIZE;
+	ccw->flags = 0;
+	ccw->cda = (__u32)(addr_t)cqr->data;
+
+	cqr->buildclk = get_clock();
+	cqr->status = DASD_CQR_FILLED;
+	cqr->callback = dasd_eer_SNSS_cb;
+	cqr->callback_data = (void *)device;
+        dasd_add_request_head(cqr);
+
+	return;
+}
+
+/*
+ * This function is called for all triggers. It calls the appropriate
+ * function that writes the actual trigger records.
+ */
+static int
+dasd_eer_write_trigger(struct dasd_eer_trigger *trigger)
+{
+	int rc;
+	struct dasd_eer_private *private = trigger->device->eer;
+
+	switch (trigger->id) {
+	case DASD_EER_FATALERROR:
+	case DASD_EER_PPRCSUSPEND:
+		rc = dasd_eer_write_standard_trigger(
+			trigger->id, trigger->device, trigger->cqr);
+		break;
+	case DASD_EER_NOPATH:
+		rc = dasd_eer_write_standard_trigger(
+			trigger->id, trigger->device, NULL);
+		break;
+	case DASD_EER_STATECHANGE:
+                if (queue_work(dasd_eer_workqueue, &private->worker)) {
+                        rc=0;
+                } else {
+                        /* If the work_struct was already queued, it can't
+                         * be queued again. But this is OK since we don't
+                         * need to have it queued twice.
+                         */
+                        rc = -EBUSY;
+                }
+		break;
+	default: /* unknown trigger, so we write it without any sense data */
+		rc = dasd_eer_write_standard_trigger(
+			trigger->id, trigger->device, NULL);
+		break;
+	}
+	return rc;
+}
+
+/*
+ * This function is registered with the dasd device driver and gets called
+ * for all dasd eer notifications.
+ */
+static int dasd_eer_notify(struct notifier_block *self,
+			    unsigned long action, void *data)
+{
+	switch (action) {
+	case DASD_EER_DISABLE:
+		dasd_eer_disable_on_device((struct dasd_device *)data);
+		break;
+	case DASD_EER_TRIGGER:
+		dasd_eer_write_trigger((struct dasd_eer_trigger *)data);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+
+/*****************************************************************************/
+/*      the device operations                                                */
+/*****************************************************************************/
+
+/*
+ * On the one side we need a lock to access our internal buffer, on the
+ * other side a copy_to_user can sleep. So we need to copy the data we have
+ * to transfer in a readbuffer, which is protected by the readbuffer_mutex.
+ */
+static char readbuffer[PAGE_SIZE];
+DECLARE_MUTEX(readbuffer_mutex);
+
+
+static int
+dasd_eer_open(struct inode *inp, struct file *filp)
+{
+	struct eerbuffer *eerb;
+	unsigned long flags;
+
+	eerb = kmalloc(sizeof(struct eerbuffer), GFP_KERNEL);
+	eerb->head = 0;
+	eerb->tail = 0;
+	eerb->residual = 0;
+	eerb->buffer_page_count = 1;
+	eerb->buffersize = eerb->buffer_page_count * PAGE_SIZE;
+        eerb->buffer = kmalloc(eerb->buffer_page_count*sizeof(char*),
+			       GFP_KERNEL);
+        if (!eerb->buffer)
+                return -ENOMEM;
+	if (dasd_eer_allocate_buffer_pages(eerb->buffer,
+					   eerb->buffer_page_count)) {
+		kfree(eerb->buffer);
+		return -ENOMEM;
+	}
+	filp->private_data = eerb;
+	spin_lock_irqsave(&bufferlock, flags);
+	list_add(&eerb->list, &bufferlist);
+	spin_unlock_irqrestore(&bufferlock, flags);
+
+	return nonseekable_open(inp,filp);
+}
+
+static int
+dasd_eer_close(struct inode *inp, struct file *filp)
+{
+	struct eerbuffer *eerb;
+	unsigned long flags;
+
+	eerb = (struct eerbuffer *)filp->private_data;
+	spin_lock_irqsave(&bufferlock, flags);
+	list_del(&eerb->list);
+	spin_unlock_irqrestore(&bufferlock, flags);
+	dasd_eer_free_buffer_pages(eerb->buffer, eerb->buffer_page_count);
+	kfree(eerb->buffer);
+	kfree(eerb);
+
+	return 0;
+}
+
+static long
+dasd_eer_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	int intval;
+	struct eerbuffer *eerb;
+
+	eerb = (struct eerbuffer *)filp->private_data;
+	switch (cmd) {
+	case DASD_EER_PURGE:
+		dasd_eer_purge_buffer(eerb);
+		return 0;
+	case DASD_EER_SETBUFSIZE:
+		if (get_user(intval, (int __user *)arg))
+			return -EFAULT;
+		return dasd_eer_resize_buffer(eerb, intval);
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+static ssize_t
+dasd_eer_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos)
+{
+	int tc,rc;
+	int tailcount,effective_count;
+        unsigned long flags;
+	struct eerbuffer *eerb;
+
+	eerb = (struct eerbuffer *)filp->private_data;
+	if(down_interruptible(&readbuffer_mutex))
+		return -ERESTARTSYS;
+
+	spin_lock_irqsave(&bufferlock, flags);
+
+	if (eerb->residual < 0) { /* the remainder of this record */
+		                  /* has been deleted             */
+		eerb->residual = 0;
+		spin_unlock_irqrestore(&bufferlock, flags);
+		up(&readbuffer_mutex);
+		return -EIO;
+	} else if (eerb->residual > 0) {
+		/* OK we still have a second half of a record to deliver */
+		effective_count = min(eerb->residual, (int)count);
+		eerb->residual -= effective_count;
+	} else {
+		tc = 0;
+		while (!tc) {
+			tc = dasd_eer_read_buffer(eerb,
+				sizeof(tailcount), (char*)(&tailcount));
+			if (!tc) {
+				/* no data available */
+				spin_unlock_irqrestore(&bufferlock, flags);
+				up(&readbuffer_mutex);
+				if (filp->f_flags & O_NONBLOCK)
+					return -EAGAIN;
+				rc = wait_event_interruptible(
+					dasd_eer_read_wait_queue,
+					eerb->head != eerb->tail);
+				if (rc) {
+					return rc;
+				}
+				if(down_interruptible(&readbuffer_mutex))
+					return -ERESTARTSYS;
+				spin_lock_irqsave(&bufferlock, flags);
+			}
+		}
+		WARN_ON(tc != sizeof(tailcount));
+		effective_count = min(tailcount,(int)count);
+		eerb->residual = tailcount - effective_count;
+	}
+
+	tc = dasd_eer_read_buffer(eerb, effective_count, readbuffer);
+	WARN_ON(tc != effective_count);
+
+	spin_unlock_irqrestore(&bufferlock, flags);
+
+	if (copy_to_user(buf, readbuffer, effective_count)) {
+		up(&readbuffer_mutex);
+		return -EFAULT;
+	}
+
+	up(&readbuffer_mutex);
+	return effective_count;
+}
+
+static unsigned int
+dasd_eer_poll (struct file *filp, poll_table *ptable)
+{
+	unsigned int mask;
+	unsigned long flags;
+	struct eerbuffer *eerb;
+
+	eerb = (struct eerbuffer *)filp->private_data;
+	poll_wait(filp, &dasd_eer_read_wait_queue, ptable);
+	spin_lock_irqsave(&bufferlock, flags);
+	if (eerb->head != eerb->tail)
+		mask = POLLIN | POLLRDNORM ;
+	else
+		mask = 0;
+	spin_unlock_irqrestore(&bufferlock, flags);
+	return mask;
+}
+
+static struct file_operations dasd_eer_fops = {
+	.open		= &dasd_eer_open,
+	.release	= &dasd_eer_close,
+	.unlocked_ioctl = &dasd_eer_ioctl,
+	.compat_ioctl	= &dasd_eer_ioctl,
+	.read		= &dasd_eer_read,
+	.poll		= &dasd_eer_poll,
+	.owner		= THIS_MODULE,
+};
+
+static struct miscdevice dasd_eer_dev = {
+	.minor	    = MISC_DYNAMIC_MINOR,
+	.name	    = "dasd_eer",
+	.fops	    = &dasd_eer_fops,
+};
+
+
+/*****************************************************************************/
+/*	Init and exit							     */
+/*****************************************************************************/
+
+static int
+__init dasd_eer_init(void)
+{
+	int rc;
+
+	dasd_eer_workqueue = create_singlethread_workqueue("dasd_eer");
+	if (!dasd_eer_workqueue) {
+		MESSAGE(KERN_ERR , "%s", "dasd_eer_init could not "
+		       "create workqueue \n");
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	rc = dasd_register_eer_notifier(&dasd_eer_nb);
+	if (rc) {
+		MESSAGE(KERN_ERR, "%s", "dasd_eer_init could not "
+		       "register error reporting");
+		goto queue;
+	}
+
+	dasd_ioctl_no_register(THIS_MODULE, BIODASDEERSET, dasd_ioctl_set_eer);
+	dasd_ioctl_no_register(THIS_MODULE, BIODASDEERGET, dasd_ioctl_get_eer);
+
+	/* we don't need our own character device,
+	 * so we just register as misc device */
+	rc = misc_register(&dasd_eer_dev);
+	if (rc) {
+		MESSAGE(KERN_ERR, "%s", "dasd_eer_init could not "
+		       "register misc device");
+		goto unregister;
+	}
+
+	return 0;
+
+unregister:
+	dasd_unregister_eer_notifier(&dasd_eer_nb);
+	dasd_ioctl_no_unregister(THIS_MODULE, BIODASDEERSET,
+				 dasd_ioctl_set_eer);
+	dasd_ioctl_no_unregister(THIS_MODULE, BIODASDEERGET,
+				 dasd_ioctl_get_eer);
+queue:
+	destroy_workqueue(dasd_eer_workqueue);
+out:
+	return rc;
+
+}
+module_init(dasd_eer_init);
+
+static void
+__exit dasd_eer_exit(void)
+{
+	dasd_unregister_eer_notifier(&dasd_eer_nb);
+	dasd_ioctl_no_unregister(THIS_MODULE, BIODASDEERSET,
+				 dasd_ioctl_set_eer);
+	dasd_ioctl_no_unregister(THIS_MODULE, BIODASDEERGET,
+				 dasd_ioctl_get_eer);
+	destroy_workqueue(dasd_eer_workqueue);
+
+	WARN_ON(misc_deregister(&dasd_eer_dev) != 0);
+}
+module_exit(dasd_eer_exit);
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index c20af9874500..d1b08fa13fd2 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -275,6 +275,34 @@ struct dasd_discipline {
 
 extern struct dasd_discipline *dasd_diag_discipline_pointer;
 
+
+/*
+ * Notification numbers for extended error reporting notifications:
+ * The DASD_EER_DISABLE notification is sent before a dasd_device (and it's
+ * eer pointer) is freed. The error reporting module needs to do all necessary
+ * cleanup steps.
+ * The DASD_EER_TRIGGER notification sends the actual error reports (triggers).
+ */
+#define DASD_EER_DISABLE 0
+#define DASD_EER_TRIGGER 1
+
+/* Trigger IDs for extended error reporting DASD_EER_TRIGGER notification */
+#define DASD_EER_FATALERROR  1
+#define DASD_EER_NOPATH      2
+#define DASD_EER_STATECHANGE 3
+#define DASD_EER_PPRCSUSPEND 4
+
+/*
+ * The dasd_eer_trigger structure contains all data that we need to send
+ * along with an DASD_EER_TRIGGER notification.
+ */
+struct dasd_eer_trigger {
+	unsigned int id;
+	struct dasd_device *device;
+	struct dasd_ccw_req *cqr;
+};
+
+
 struct dasd_device {
 	/* Block device stuff. */
 	struct gendisk *gdp;
@@ -288,6 +316,9 @@ struct dasd_device {
 	unsigned long flags;		/* per device flags */
 	unsigned short features;        /* copy of devmap-features (read-only!) */
 
+	/* extended error reporting stuff (eer) */
+	void *eer;
+
 	/* Device discipline stuff. */
 	struct dasd_discipline *discipline;
 	char *private;
@@ -488,6 +519,12 @@ int dasd_generic_set_online(struct ccw_device *, struct dasd_discipline *);
 int dasd_generic_set_offline (struct ccw_device *cdev);
 int dasd_generic_notify(struct ccw_device *, int);
 void dasd_generic_auto_online (struct ccw_driver *);
+int dasd_register_eer_notifier(struct notifier_block *);
+int dasd_unregister_eer_notifier(struct notifier_block *);
+void dasd_write_eer_trigger(unsigned int , struct dasd_device *,
+			struct dasd_ccw_req *);
+
+
 
 /* externals in dasd_devmap.c */
 extern int dasd_max_devindex;
diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h
index 44e4b4bb1c5a..3e75095f35d0 100644
--- a/drivers/s390/cio/chsc.h
+++ b/drivers/s390/cio/chsc.h
@@ -68,6 +68,6 @@ extern void *chsc_get_chp_desc(struct subchannel*, int);
 
 extern int chsc_enable_facility(int);
 
-#define to_channelpath(dev) container_of(dev, struct channel_path, dev)
+#define to_channelpath(device) container_of(device, struct channel_path, dev)
 
 #endif
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 38d6d00fb0fc..014cc8d54a9f 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -38,10 +38,10 @@
 #include <linux/slab.h>
 #include <linux/completion.h>
 #include <linux/blkdev.h>
+#include <linux/delay.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_device.h>
 #include <asm/semaphore.h>
-#include <asm/delay.h>
 
 #include "aacraid.h"
 
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index 311a4122bd70..93edaa8696cf 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -537,9 +537,9 @@ static int mac53c94_remove(struct macio_dev *mdev)
 	free_irq(fp->intr, fp);
 
 	if (fp->regs)
-		iounmap((void *) fp->regs);
+		iounmap(fp->regs);
 	if (fp->dma)
-		iounmap((void *) fp->dma);
+		iounmap(fp->dma);
 	kfree(fp->dma_cmd_space);
 
 	scsi_host_put(host);
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 245ca99a641e..c551bb84dbfb 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1245,7 +1245,7 @@ static int __init init_scsi(void)
 	if (error)
 		goto cleanup_sysctl;
 
-	for (i = 0; i < NR_CPUS; i++)
+	for_each_cpu(i)
 		INIT_LIST_HEAD(&per_cpu(scsi_done_q, i));
 
 	devfs_mk_dir("scsi");
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 59a1c9d9d3bd..723f7acbeb12 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -463,7 +463,7 @@ static inline struct list_head *skb_to_lh(struct sk_buff *skb)
 }
 
 static void*
-mempool_zone_alloc_skb(unsigned int gfp_mask, void *pool_data)
+mempool_zone_alloc_skb(gfp_t gfp_mask, void *pool_data)
 {
 	struct mempool_zone *zone = pool_data;
 
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 7d0700091f3d..2a547538d444 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1679,7 +1679,7 @@ static int
 sg_build_sgat(Sg_scatter_hold * schp, const Sg_fd * sfp, int tablesize)
 {
 	int sg_bufflen = tablesize * sizeof(struct scatterlist);
-	unsigned int gfp_flags = GFP_ATOMIC | __GFP_NOWARN;
+	gfp_t gfp_flags = GFP_ATOMIC | __GFP_NOWARN;
 
 	/*
 	 * TODO: test without low_dma, we should not need it since
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 7aef7518b0d1..8c5c276c5577 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -362,7 +362,7 @@ static struct uart_ops serial21285_ops = {
 
 static struct uart_port serial21285_port = {
 	.mapbase	= 0x42000160,
-	.iotype		= SERIAL_IO_MEM,
+	.iotype		= UPIO_MEM,
 	.irq		= NO_IRQ,
 	.fifosize	= 16,
 	.ops		= &serial21285_ops,
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 8cbf0fc5a225..7f0f35a05dca 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -332,7 +332,7 @@ static _INLINE_ void receive_chars(struct m68k_serial *info, struct pt_regs *reg
 		 * Make sure that we do not overflow the buffer
 		 */
 		if (tty_request_buffer_room(tty, 1) == 0) {
-			schedule_work(&tty->flip.work);
+			tty_schedule_flip(tty);
 			return;
 		}
 
@@ -353,7 +353,7 @@ static _INLINE_ void receive_chars(struct m68k_serial *info, struct pt_regs *reg
 	} while((rx = uart->urx.w) & URX_DATA_READY);
 #endif
 
-	schedule_work(&tty->flip.work);
+	tty_schedule_flip(tty);
 
 clear_and_exit:
 	return;
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 60f5a5dc17f1..9843ae3d420e 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -509,7 +509,7 @@ static _INLINE_ void receive_chars(ser_info_t *info)
 
 	info->rx_cur = (QUICC_BD *)bdp;
 
-	schedule_work(&tty->flip.work);
+	tty_schedule_flip(tty);
 }
 
 static _INLINE_ void receive_break(ser_info_t *info)
@@ -521,7 +521,7 @@ static _INLINE_ void receive_break(ser_info_t *info)
 	 * the break.  If not, we exit now, losing the break.  FIXME
 	 */
 	tty_insert_flip_char(tty, 0, TTY_BREAK);
-	schedule_work(&tty->flip.work);
+	tty_schedule_flip(tty);
 }
 
 static _INLINE_ void transmit_chars(ser_info_t *info)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 179c1f065e60..b1fc97d5f643 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2229,6 +2229,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 	 *	and restore the IER
 	 */
 	wait_for_xmitr(up, BOTH_EMPTY);
+	up->ier |= UART_IER_THRI;
 	serial_out(up, UART_IER, ier | UART_IER_THRI);
 }
 
diff --git a/drivers/serial/8250_au1x00.c b/drivers/serial/8250_au1x00.c
index 06ae8fbcc947..8d8d7a70d03e 100644
--- a/drivers/serial/8250_au1x00.c
+++ b/drivers/serial/8250_au1x00.c
@@ -56,7 +56,6 @@ static struct plat_serial8250_port au1x00_data[] = {
 #elif defined(CONFIG_SOC_AU1550)
 	PORT(UART0_ADDR, AU1550_UART0_INT),
 	PORT(UART1_ADDR, AU1550_UART1_INT),
-	PORT(UART2_ADDR, AU1550_UART2_INT),
 	PORT(UART3_ADDR, AU1550_UART3_INT),
 #elif defined(CONFIG_SOC_AU1200)
 	PORT(UART0_ADDR, AU1200_UART0_INT),
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 2a912153321e..94886c000d2a 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -439,6 +439,20 @@ static int pci_siig_init(struct pci_dev *dev)
 	return -ENODEV;
 }
 
+static int pci_siig_setup(struct serial_private *priv,
+			  struct pciserial_board *board,
+			  struct uart_port *port, int idx)
+{
+	unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
+
+	if (idx > 3) {
+		bar = 4;
+		offset = (idx - 4) * 8;
+	}
+
+	return setup_port(priv, port, bar, offset, 0);
+}
+
 /*
  * Timedia has an explosion of boards, and to avoid the PCI table from
  * growing *huge*, we use this function to collapse some 70 entries
@@ -748,7 +762,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_siig_init,
-		.setup		= pci_default_setup,
+		.setup		= pci_siig_setup,
 	},
 	/*
 	 * Titan cards
@@ -1868,6 +1882,10 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_SUBVENDOR_ID_CONNECT_TECH,
 		PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0,
 		pbn_b0_4_1843200 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+		PCI_VENDOR_ID_AFAVLAB,
+		PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0,
+		pbn_b0_4_1152000 },
 	{	PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
 		PCI_SUBVENDOR_ID_CONNECT_TECH,
 		PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0,
@@ -2141,6 +2159,15 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_bt_4_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_8_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_8_921600 },
+	{	PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_8_921600 },
 
 	/*
 	 * Computone devices submitted by Doug McNash dmcnash@computone.com
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 0d38f0f2ae29..0f4361c8466b 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -98,6 +98,7 @@ config SERIAL_8250_NR_UARTS
 config SERIAL_8250_RUNTIME_UARTS
 	int "Number of 8250/16550 serial ports to register at runtime"
 	depends on SERIAL_8250
+	range 0 SERIAL_8250_NR_UARTS
 	default "4"
 	help
 	  Set this to the maximum number of serial ports you want
@@ -892,20 +893,20 @@ config SERIAL_VR41XX_CONSOLE
 	  a console on a serial port, say Y.  Otherwise, say N.
 
 config SERIAL_JSM
-        tristate "Digi International NEO PCI Support"
-	depends on PCI && BROKEN
-        select SERIAL_CORE
-        help
-          This is a driver for Digi International's Neo series
-          of cards which provide multiple serial ports. You would need
-          something like this to connect more than two modems to your Linux
-          box, for instance in order to become a dial-in server. This driver
-          supports PCI boards only.
-          If you have a card like this, say Y here and read the file
-          <file:Documentation/jsm.txt>.
-
-          To compile this driver as a module, choose M here: the
-          module will be called jsm.
+	tristate "Digi International NEO PCI Support"
+	depends on PCI
+	select SERIAL_CORE
+	help
+	  This is a driver for Digi International's Neo series
+	  of cards which provide multiple serial ports. You would need
+	  something like this to connect more than two modems to your Linux
+	  box, for instance in order to become a dial-in server. This driver
+	  supports PCI boards only.
+	  If you have a card like this, say Y here and read the file
+	  <file:Documentation/jsm.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called jsm.
 
 config SERIAL_SGI_IOC4
 	tristate "SGI IOC4 controller serial support"
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 429de2723a1c..321a3b3a5728 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -561,7 +561,7 @@ static struct uart_amba_port amba_ports[UART_NR] = {
 		.port	= {
 			.membase	= (void *)IO_ADDRESS(INTEGRATOR_UART0_BASE),
 			.mapbase	= INTEGRATOR_UART0_BASE,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.irq		= IRQ_UARTINT0,
 			.uartclk	= 14745600,
 			.fifosize	= 16,
@@ -576,7 +576,7 @@ static struct uart_amba_port amba_ports[UART_NR] = {
 		.port	= {
 			.membase	= (void *)IO_ADDRESS(INTEGRATOR_UART1_BASE),
 			.mapbase	= INTEGRATOR_UART1_BASE,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.irq		= IRQ_UARTINT1,
 			.uartclk	= 14745600,
 			.fifosize	= 16,
diff --git a/drivers/serial/au1x00_uart.c b/drivers/serial/au1x00_uart.c
index ceb5d7f37bbd..344022fe53ef 100644
--- a/drivers/serial/au1x00_uart.c
+++ b/drivers/serial/au1x00_uart.c
@@ -892,7 +892,7 @@ serial8250_request_std_resource(struct uart_8250_port *up, struct resource **res
 	int ret = 0;
 
 	switch (up->port.iotype) {
-	case SERIAL_IO_MEM:
+	case UPIO_MEM:
 		if (up->port.mapbase) {
 			*res = request_mem_region(up->port.mapbase, size, "serial");
 			if (!*res)
@@ -900,8 +900,8 @@ serial8250_request_std_resource(struct uart_8250_port *up, struct resource **res
 		}
 		break;
 
-	case SERIAL_IO_HUB6:
-	case SERIAL_IO_PORT:
+	case UPIO_HUB6:
+	case UPIO_PORT:
 		*res = request_region(up->port.iobase, size, "serial");
 		if (!*res)
 			ret = -EBUSY;
@@ -919,7 +919,7 @@ static void serial8250_release_port(struct uart_port *port)
 	size <<= up->port.regshift;
 
 	switch (up->port.iotype) {
-	case SERIAL_IO_MEM:
+	case UPIO_MEM:
 		if (up->port.mapbase) {
 			/*
 			 * Unmap the area.
@@ -935,8 +935,8 @@ static void serial8250_release_port(struct uart_port *port)
 		}
 		break;
 
-	case SERIAL_IO_HUB6:
-	case SERIAL_IO_PORT:
+	case UPIO_HUB6:
+	case UPIO_PORT:
 		start = up->port.iobase;
 
 		if (size)
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 16af5626c243..b7bf4c698a47 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -252,12 +252,9 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
 		/* If we have not enough room in tty flip buffer, then we try
 		 * later, which will be the next rx-interrupt or a timeout
 		 */
-		if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
-			tty->flip.work.func((void *)tty);
-			if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
-				printk(KERN_WARNING "TTY_DONT_FLIP set\n");
-				return;
-			}
+		if(tty_buffer_request_room(tty, i) < i) {
+			printk(KERN_WARNING "No room in flip buffer\n");
+			return;
 		}
 
 		/* get pointer */
@@ -276,9 +273,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
 				continue;
 
 		      error_return:
-			*tty->flip.char_buf_ptr++ = ch;
-			*tty->flip.flag_buf_ptr++ = flg;
-			tty->flip.count++;
+			tty_insert_flip_char(tty, ch, flg);
 
 		}		/* End while (i--) */
 
@@ -908,7 +903,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 		.port = {
 			.irq		= SMC1_IRQ,
 			.ops		= &cpm_uart_pops,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.lock		= SPIN_LOCK_UNLOCKED,
 		},
 		.flags = FLAG_SMC,
@@ -922,7 +917,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 		.port = {
 			.irq		= SMC2_IRQ,
 			.ops		= &cpm_uart_pops,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.lock		= SPIN_LOCK_UNLOCKED,
 		},
 		.flags = FLAG_SMC,
@@ -939,7 +934,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 		.port = {
 			.irq		= SCC1_IRQ,
 			.ops		= &cpm_uart_pops,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.lock		= SPIN_LOCK_UNLOCKED,
 		},
 		.tx_nrfifos = TX_NUM_FIFO,
@@ -953,7 +948,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 		.port = {
 			.irq		= SCC2_IRQ,
 			.ops		= &cpm_uart_pops,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.lock		= SPIN_LOCK_UNLOCKED,
 		},
 		.tx_nrfifos = TX_NUM_FIFO,
@@ -967,7 +962,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 		.port = {
 			.irq		= SCC3_IRQ,
 			.ops		= &cpm_uart_pops,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.lock		= SPIN_LOCK_UNLOCKED,
 		},
 		.tx_nrfifos = TX_NUM_FIFO,
@@ -981,7 +976,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 		.port = {
 			.irq		= SCC4_IRQ,
 			.ops		= &cpm_uart_pops,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.lock		= SPIN_LOCK_UNLOCKED,
 		},
 		.tx_nrfifos = TX_NUM_FIFO,
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index a64ba26a94e8..ba5541de673b 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -262,6 +262,7 @@ static inline void dz_receive_chars(struct dz_port *dport)
 		}
 		tty_insert_flip_char(tty, ch, flag);
 	      ignore_char:
+			;
 	} while (status & DZ_DVAL);
 
 	if (tty)
@@ -650,7 +651,7 @@ static void __init dz_init_ports(void)
 	for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) {
 		spin_lock_init(&dport->port.lock);
 		dport->port.membase	= (char *) base;
-		dport->port.iotype	= SERIAL_IO_PORT;
+		dport->port.iotype	= UPIO_PORT;
 		dport->port.irq		= dec_interrupt[DEC_IRQ_DZ11];
 		dport->port.line	= i;
 		dport->port.fifosize	= 1;
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 858048efe1ed..4d53fb5ca87b 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -668,7 +668,7 @@ static struct imx_port imx_ports[] = {
 	.rtsirq = UART1_MINT_RTS,
 	.port	= {
 		.type		= PORT_IMX,
-		.iotype		= SERIAL_IO_MEM,
+		.iotype		= UPIO_MEM,
 		.membase	= (void *)IMX_UART1_BASE,
 		.mapbase	= IMX_UART1_BASE, /* FIXME */
 		.irq		= UART1_MINT_RX,
@@ -684,7 +684,7 @@ static struct imx_port imx_ports[] = {
 	.rtsirq = UART2_MINT_RTS,
 	.port	= {
 		.type		= PORT_IMX,
-		.iotype		= SERIAL_IO_MEM,
+		.iotype		= UPIO_MEM,
 		.membase	= (void *)IMX_UART2_BASE,
 		.mapbase	= IMX_UART2_BASE, /* FIXME */
 		.irq		= UART2_MINT_RX,
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 66f117d15065..419dd3cd7862 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -215,7 +215,7 @@ static void __load_zsregs(struct zilog_channel *channel, unsigned char *regs)
 	/* Lower and upper byte of baud rate generator divisor.  */
 	write_zsreg(channel, R12, regs[R12]);
 	write_zsreg(channel, R13, regs[R13]);
-	
+
 	/* Now rewrite R14, with BRENAB (if set).  */
 	write_zsreg(channel, R14, regs[R14]);
 
@@ -571,7 +571,7 @@ static void ip22zilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	else
 		clear_bits |= DTR;
 
-	/* NOTE: Not subject to 'transmitter active' rule.  */ 
+	/* NOTE: Not subject to 'transmitter active' rule.  */
 	up->curregs[R5] |= set_bits;
 	up->curregs[R5] &= ~clear_bits;
 	write_zsreg(channel, R5, up->curregs[R5]);
@@ -654,7 +654,7 @@ static void ip22zilog_enable_ms(struct uart_port *port)
 	if (new_reg != up->curregs[R15]) {
 		up->curregs[R15] = new_reg;
 
-		/* NOTE: Not subject to 'transmitter active' rule.  */ 
+		/* NOTE: Not subject to 'transmitter active' rule.  */
 		write_zsreg(channel, R15, up->curregs[R15]);
 	}
 }
@@ -680,7 +680,7 @@ static void ip22zilog_break_ctl(struct uart_port *port, int break_state)
 	if (new_reg != up->curregs[R5]) {
 		up->curregs[R5] = new_reg;
 
-		/* NOTE: Not subject to 'transmitter active' rule.  */ 
+		/* NOTE: Not subject to 'transmitter active' rule.  */
 		write_zsreg(channel, R5, up->curregs[R5]);
 	}
 
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 18753193f59b..dfc1e86d3aa1 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -380,7 +380,6 @@ struct neo_uart_struct {
 extern struct	uart_driver jsm_uart_driver;
 extern struct	board_ops jsm_neo_ops;
 extern int	jsm_debug;
-extern int	jsm_rawreadok;
 
 /*************************************************************************
  *
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 7e56c7824194..b1b66e71d281 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -49,11 +49,8 @@ struct uart_driver jsm_uart_driver = {
 };
 
 int jsm_debug;
-int jsm_rawreadok;
 module_param(jsm_debug, int, 0);
-module_param(jsm_rawreadok, int, 0);
 MODULE_PARM_DESC(jsm_debug, "Driver debugging level");
-MODULE_PARM_DESC(jsm_rawreadok, "Bypass flip buffers on input");
 
 static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 6fa0d62d6f68..4d48b625cd3d 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -20,8 +20,10 @@
  *
  * Contact Information:
  * Scott H Kilau <Scott_Kilau@digi.com>
- * Wendy Xiong   <wendyx@us.ltcfwd.linux.ibm.com>
- *
+ * Ananda Venkatarman <mansarov@us.ibm.com>
+ * Modifications:
+ * 01/19/06:	changed jsm_input routine to use the dynamically allocated
+ *		tty_buffer changes. Contributors: Scott Kilau and Ananda V.
  ***********************************************************************/
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
@@ -497,16 +499,15 @@ void jsm_input(struct jsm_channel *ch)
 {
 	struct jsm_board *bd;
 	struct tty_struct *tp;
+	struct tty_ldisc *ld;
 	u32 rmask;
 	u16 head;
 	u16 tail;
 	int data_len;
 	unsigned long lock_flags;
-	int flip_len;
+	int flip_len = 0;
 	int len = 0;
 	int n = 0;
-	char *buf = NULL;
-	char *buf2 = NULL;
 	int s = 0;
 	int i = 0;
 
@@ -574,56 +575,50 @@ void jsm_input(struct jsm_channel *ch)
 
 	/*
 	 * If the rxbuf is empty and we are not throttled, put as much
-	 * as we can directly into the linux TTY flip buffer.
-	 * The jsm_rawreadok case takes advantage of carnal knowledge that
-	 * the char_buf and the flag_buf are next to each other and
-	 * are each of (2 * TTY_FLIPBUF_SIZE) size.
+	 * as we can directly into the linux TTY buffer.
 	 *
-	 * NOTE: if(!tty->real_raw), the call to ldisc.receive_buf
-	 *actually still uses the flag buffer, so you can't
-	 *use it for input data
 	 */
-	if (jsm_rawreadok) {
-		if (tp->real_raw)
-			flip_len = MYFLIPLEN;
-		else
-			flip_len = 2 * TTY_FLIPBUF_SIZE;
-	} else
-		flip_len = TTY_FLIPBUF_SIZE - tp->flip.count;
+	flip_len = TTY_FLIPBUF_SIZE;
 
 	len = min(data_len, flip_len);
 	len = min(len, (N_TTY_BUF_SIZE - 1) - tp->read_cnt);
+	ld = tty_ldisc_ref(tp);
 
-	if (len <= 0) {
-		spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-		jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n");
-		return;
-	}
+	/*
+	 * If the DONT_FLIP flag is on, don't flush our buffer, and act
+	 * like the ld doesn't have any space to put the data right now.
+	 */
+	if (test_bit(TTY_DONT_FLIP, &tp->flags))
+		len = 0;
 
 	/*
-	 * If we're bypassing flip buffers on rx, we can blast it
-	 * right into the beginning of the buffer.
+	 * If we were unable to get a reference to the ld,
+	 * don't flush our buffer, and act like the ld doesn't
+	 * have any space to put the data right now.
 	 */
-	if (jsm_rawreadok) {
-		if (tp->real_raw) {
-			if (ch->ch_flags & CH_FLIPBUF_IN_USE) {
-				jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
-					"JSM - FLIPBUF in use. delaying input\n");
-				spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-				return;
-			}
-			ch->ch_flags |= CH_FLIPBUF_IN_USE;
-			buf = ch->ch_bd->flipbuf;
-			buf2 = NULL;
-		} else {
-			buf = tp->flip.char_buf;
-			buf2 = tp->flip.flag_buf;
-		}
+	if (!ld) {
+		len = 0;
 	} else {
-		buf = tp->flip.char_buf_ptr;
-		buf2 = tp->flip.flag_buf_ptr;
+		/*
+		 * If ld doesn't have a pointer to a receive_buf function,
+		 * flush the data, then act like the ld doesn't have any
+		 * space to put the data right now.
+		 */
+		if (!ld->receive_buf) {
+				ch->ch_r_head = ch->ch_r_tail;
+				len = 0;
+		}
 	}
 
+	if (len <= 0) {
+		spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+		jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n");
+		if (ld)
+			tty_ldisc_deref(ld);
+		return;
+	}
+
+	len = tty_buffer_request_room(tp, len);
 	n = len;
 
 	/*
@@ -638,121 +633,47 @@ void jsm_input(struct jsm_channel *ch)
 		if (s <= 0)
 			break;
 
-		memcpy(buf, ch->ch_rqueue + tail, s);
-
-		/* buf2 is only set when port isn't raw */
-		if (buf2)
-			memcpy(buf2, ch->ch_equeue + tail, s);
-
-		tail += s;
-		buf += s;
-		if (buf2)
-			buf2 += s;
-		n -= s;
-		/* Flip queue if needed */
-		tail &= rmask;
-	}
+			/*
+			 * If conditions are such that ld needs to see all
+			 * UART errors, we will have to walk each character
+			 * and error byte and send them to the buffer one at
+			 * a time.
+			 */
 
-	/*
-	 * In high performance mode, we don't have to update
-	 * flag_buf or any of the counts or pointers into flip buf.
-	 */
-	if (!jsm_rawreadok) {
 		if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
-			for (i = 0; i < len; i++) {
+			for (i = 0; i < s; i++) {
 				/*
 				 * Give the Linux ld the flags in the
 				 * format it likes.
 				 */
-				if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI)
-					tp->flip.flag_buf_ptr[i] = TTY_BREAK;
-				else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE)
-					tp->flip.flag_buf_ptr[i] = TTY_PARITY;
-				else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE)
-					tp->flip.flag_buf_ptr[i] = TTY_FRAME;
+				if (*(ch->ch_equeue +tail +i) & UART_LSR_BI)
+					tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i),  TTY_BREAK);
+				else if (*(ch->ch_equeue +tail +i) & UART_LSR_PE)
+					tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_PARITY);
+				else if (*(ch->ch_equeue +tail +i) & UART_LSR_FE)
+					tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_FRAME);
 				else
-					tp->flip.flag_buf_ptr[i] = TTY_NORMAL;
+				tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_NORMAL);
 			}
 		} else {
-			memset(tp->flip.flag_buf_ptr, 0, len);
+			tty_insert_flip_string(tp, ch->ch_rqueue + tail, s) ;
 		}
-
-		tp->flip.char_buf_ptr += len;
-		tp->flip.flag_buf_ptr += len;
-		tp->flip.count += len;
-	}
-	else if (!tp->real_raw) {
-		if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
-			for (i = 0; i < len; i++) {
-				/*
-				 * Give the Linux ld the flags in the
-				 * format it likes.
-				 */
-				if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI)
-					tp->flip.flag_buf_ptr[i] = TTY_BREAK;
-				else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE)
-					tp->flip.flag_buf_ptr[i] = TTY_PARITY;
-				else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE)
-					tp->flip.flag_buf_ptr[i] = TTY_FRAME;
-				else
-					tp->flip.flag_buf_ptr[i] = TTY_NORMAL;
-			}
-		} else
-			memset(tp->flip.flag_buf, 0, len);
+		tail += s;
+		n -= s;
+		/* Flip queue if needed */
+		tail &= rmask;
 	}
 
-	/*
-	 * If we're doing raw reads, jam it right into the
-	 * line disc bypassing the flip buffers.
-	 */
-	if (jsm_rawreadok) {
-		if (tp->real_raw) {
-			ch->ch_r_tail = tail & rmask;
-			ch->ch_e_tail = tail & rmask;
-
-			jsm_check_queue_flow_control(ch);
-
-			/* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */
+	ch->ch_r_tail = tail & rmask;
+	ch->ch_e_tail = tail & rmask;
+	jsm_check_queue_flow_control(ch);
+	spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
 
-			spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+	/* Tell the tty layer its okay to "eat" the data now */
+	tty_flip_buffer_push(tp);
 
-			jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
-				"jsm_input. %d real_raw len:%d calling receive_buf for board %d\n",
-				__LINE__, len, ch->ch_bd->boardnum);
-			tp->ldisc.receive_buf(tp, ch->ch_bd->flipbuf, NULL, len);
-
-			/* Allow use of channel flip buffer again */
-			spin_lock_irqsave(&ch->ch_lock, lock_flags);
-			ch->ch_flags &= ~CH_FLIPBUF_IN_USE;
-			spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-
-		} else {
-			ch->ch_r_tail = tail & rmask;
-			ch->ch_e_tail = tail & rmask;
-
-			jsm_check_queue_flow_control(ch);
-
-			/* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */
-			spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-
-			jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
-				"jsm_input. %d not real_raw len:%d calling receive_buf for board %d\n",
-				__LINE__, len, ch->ch_bd->boardnum);
-
-			tp->ldisc.receive_buf(tp, tp->flip.char_buf, tp->flip.flag_buf, len);
-		}
-	} else {
-		ch->ch_r_tail = tail & rmask;
-		ch->ch_e_tail = tail & rmask;
-
-		jsm_check_queue_flow_control(ch);
-
-		spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-
-		jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
-			"jsm_input. %d not jsm_read raw okay scheduling flip\n", __LINE__);
-		tty_schedule_flip(tp);
-	}
+	if (ld)
+		tty_ldisc_deref(ld);
 
 	jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
 }
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index b48066a64a7d..242a04104393 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -80,7 +80,7 @@
 #include <asm/serial.h>
 
 /* Standard COM flags */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
 
 /*
  * SERIAL_PORT_DFNS tells us about built-in ports that have no
diff --git a/drivers/serial/m32r_sio.h b/drivers/serial/m32r_sio.h
index 07d0dd80aa3d..7c3ec24f7e50 100644
--- a/drivers/serial/m32r_sio.h
+++ b/drivers/serial/m32r_sio.h
@@ -37,7 +37,7 @@ struct old_serial_port {
 	unsigned int irq;
 	unsigned int flags;
 	unsigned char io_type;
-	unsigned char *iomem_base;
+	unsigned char __iomem *iomem_base;
 	unsigned short iomem_reg_shift;
 };
 
diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
index d957a3a9edf1..8cbbb954df2c 100644
--- a/drivers/serial/mcfserial.c
+++ b/drivers/serial/mcfserial.c
@@ -57,20 +57,16 @@ struct timer_list mcfrs_timer_struct;
  *	keep going.  Perhaps one day the cflag settings for the
  *	console can be used instead.
  */
-#if defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
-    defined(CONFIG_senTec) || defined(CONFIG_SNEHA)
-#define	CONSOLE_BAUD_RATE	19200
-#define	DEFAULT_CBAUD		B19200
-#endif
-
 #if defined(CONFIG_HW_FEITH)
 #define	CONSOLE_BAUD_RATE	38400
 #define	DEFAULT_CBAUD		B38400
-#endif
-
-#if defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB)
+#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB)
 #define CONSOLE_BAUD_RATE 	115200
 #define DEFAULT_CBAUD		B115200
+#elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
+      defined(CONFIG_senTec) || defined(CONFIG_SNEHA)
+#define	CONSOLE_BAUD_RATE	19200
+#define	DEFAULT_CBAUD		B19200
 #endif
 
 #ifndef CONSOLE_BAUD_RATE
@@ -350,8 +346,7 @@ static inline void receive_chars(struct mcf_serial *info)
 		}
 		tty_insert_flip_char(tty, ch, flag);
 	}
-
-	schedule_work(&tty->flip.work);
+	tty_schedule_flip(tty);
 	return;
 }
 
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 4e49168c3176..868eaf4a1a68 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -462,7 +462,7 @@ static int __init mux_probe(struct parisc_device *dev)
 		port->mapbase	= dev->hpa.start + MUX_OFFSET +
 						(i * MUX_LINE_OFFSET);
 		port->membase	= ioremap(port->mapbase, MUX_LINE_OFFSET);
-		port->iotype	= SERIAL_IO_MEM;
+		port->iotype	= UPIO_MEM;
 		port->type	= PORT_MUX;
 		port->irq	= NO_IRQ;
 		port->uartclk	= 0;
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 4e03a87f3fb4..9b7ed58cb53b 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1492,7 +1492,7 @@ no_dma:
 	/*
 	 * Init remaining bits of "port" structure
 	 */
-	uap->port.iotype = SERIAL_IO_MEM;
+	uap->port.iotype = UPIO_MEM;
 	uap->port.irq = np->intrs[0].line;
 	uap->port.uartclk = ZS_CLOCK;
 	uap->port.fifosize = 1;
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 0a2dd6c5b95f..7410e093a6b9 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -161,7 +161,11 @@ s3c24xx_serial_dbg(const char *fmt, ...)
 
 /* we can support 3 uarts, but not always use them */
 
+#ifdef CONFIG_CPU_S3C2400
+#define NR_PORTS (2)
+#else
 #define NR_PORTS (3)
+#endif
 
 /* port irq numbers */
 
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index ff7b60b4de37..2c00b8625852 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -628,7 +628,7 @@ static void __init sa1100_init_ports(void)
 		sa1100_ports[i].port.ops       = &sa1100_pops;
 		sa1100_ports[i].port.fifosize  = 8;
 		sa1100_ports[i].port.line      = i;
-		sa1100_ports[i].port.iotype    = SERIAL_IO_MEM;
+		sa1100_ports[i].port.iotype    = UPIO_MEM;
 		init_timer(&sa1100_ports[i].timer);
 		sa1100_ports[i].timer.function = sa1100_timeout;
 		sa1100_ports[i].timer.data     = (unsigned long)&sa1100_ports[i];
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 0717abfdae06..95fb4939c675 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2237,7 +2237,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 	 * If this port is a console, then the spinlock is already
 	 * initialised.
 	 */
-	if (!uart_console(port))
+	if (!(uart_console(port) && (port->cons->flags & CON_ENABLED)))
 		spin_lock_init(&port->lock);
 
 	uart_configure_port(drv, state, port);
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index d0490f67f597..04186eaae227 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -501,7 +501,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
 		.port = {
 			.membase	= (void*) io_p2v (UART1_PHYS),
 			.mapbase	= UART1_PHYS,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.irq		= IRQ_UART1INTR,
 			.uartclk	= 14745600/2,
 			.fifosize	= 16,
@@ -514,7 +514,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
 		.port = {
 			.membase	= (void*) io_p2v (UART2_PHYS),
 			.mapbase	= UART2_PHYS,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.irq		= IRQ_UART2INTR,
 			.uartclk	= 14745600/2,
 			.fifosize	= 16,
@@ -527,7 +527,7 @@ static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
 		.port = {
 			.membase	= (void*) io_p2v (UART3_PHYS),
 			.mapbase	= UART3_PHYS,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.irq		= IRQ_UART3INTR,
 			.uartclk	= 14745600/2,
 			.fifosize	= 16,
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 80737c131ce7..44f6bf79bbe1 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1468,10 +1468,10 @@ static struct sci_port sci_ports[] = {
 		.port   = {
 			.membase	= (void *)0xff923000,
 			.mapbase	= 0xff923000,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.irq		= 61,
 			.ops		= &sci_uart_ops,
-			.flags		= ASYNC_BOOT_AUTOCONF,
+			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 0,
 		},
 		.type		= PORT_SCIF,
@@ -1482,10 +1482,10 @@ static struct sci_port sci_ports[] = {
 		.port   = {
 			.membase	= (void *)0xff924000,
 			.mapbase	= 0xff924000,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.irq		= 62,
 			.ops		= &sci_uart_ops,
-			.flags		= ASYNC_BOOT_AUTOCONF,
+			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 1,
 		},
 		.type		= PORT_SCIF,
@@ -1496,10 +1496,10 @@ static struct sci_port sci_ports[] = {
 		.port   = {
 			.membase	= (void *)0xff925000,
 			.mapbase	= 0xff925000,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.irq		= 63,
 			.ops		= &sci_uart_ops,
-			.flags		= ASYNC_BOOT_AUTOCONF,
+			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 2,
 		},
 		.type		= PORT_SCIF,
@@ -1511,10 +1511,10 @@ static struct sci_port sci_ports[] = {
 		.port   = {
 			.membase	= (void *)0xffe00000,
 			.mapbase	= 0xffe00000,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.irq		= 43,
 			.ops		= &sci_uart_ops,
-			.flags		= ASYNC_BOOT_AUTOCONF,
+			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 0,
 		},
 		.type		= PORT_SCIF,
@@ -1525,10 +1525,10 @@ static struct sci_port sci_ports[] = {
 		.port   = {
 			.membase	= (void *)0xffe10000,
 			.mapbase	= 0xffe10000,
-			.iotype		= SERIAL_IO_MEM,
+			.iotype		= UPIO_MEM,
 			.irq		= 79,
 			.ops		= &sci_uart_ops,
-			.flags		= ASYNC_BOOT_AUTOCONF,
+			.flags		= UPF_BOOT_AUTOCONF,
 			.line		= 1,
 		},
 		.type		= PORT_SCIF,
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 8bcaebcc0ad7..85664228a0b6 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -1036,7 +1036,7 @@ static void __init sab_attach_callback(struct linux_ebus_device *edev, void *arg
 		up->port.irq = edev->irqs[0];
 		up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
 		up->port.mapbase = (unsigned long)up->regs;
-		up->port.iotype = SERIAL_IO_MEM;
+		up->port.iotype = UPIO_MEM;
 
 		writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
 
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index bc67442c6b4c..308704566948 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -109,11 +109,11 @@ static _INLINE_ unsigned int serial_in(struct uart_sunsu_port *up, int offset)
 	offset <<= up->port.regshift;
 
 	switch (up->port.iotype) {
-	case SERIAL_IO_HUB6:
+	case UPIO_HUB6:
 		outb(up->port.hub6 - 1 + offset, up->port.iobase);
 		return inb(up->port.iobase + 1);
 
-	case SERIAL_IO_MEM:
+	case UPIO_MEM:
 		return readb(up->port.membase + offset);
 
 	default:
@@ -139,12 +139,12 @@ serial_out(struct uart_sunsu_port *up, int offset, int value)
 	offset <<= up->port.regshift;
 
 	switch (up->port.iotype) {
-	case SERIAL_IO_HUB6:
+	case UPIO_HUB6:
 		outb(up->port.hub6 - 1 + offset, up->port.iobase);
 		outb(value, up->port.iobase + 1);
 		break;
 
-	case SERIAL_IO_MEM:
+	case UPIO_MEM:
 		writeb(value, up->port.membase + offset);
 		break;
 
@@ -1052,7 +1052,7 @@ static void sunsu_autoconfig(struct uart_sunsu_port *up)
 		return;
 
 	up->type_probed = PORT_UNKNOWN;
-	up->port.iotype = SERIAL_IO_MEM;
+	up->port.iotype = UPIO_MEM;
 
 	/*
 	 * First we look for Ebus-bases su's
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 3c72484adea7..5cc4d4c2935c 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1487,7 +1487,7 @@ static void __init sunzilog_prepare(void)
 		up[(chip * 2) + 1].port.membase = (void __iomem *)&rp->channelB;
 
 		/* Channel A */
-		up[(chip * 2) + 0].port.iotype = SERIAL_IO_MEM;
+		up[(chip * 2) + 0].port.iotype = UPIO_MEM;
 		up[(chip * 2) + 0].port.irq = zilog_irq;
 		up[(chip * 2) + 0].port.uartclk = ZS_CLOCK;
 		up[(chip * 2) + 0].port.fifosize = 1;
@@ -1498,7 +1498,7 @@ static void __init sunzilog_prepare(void)
 		up[(chip * 2) + 0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
 
 		/* Channel B */
-		up[(chip * 2) + 1].port.iotype = SERIAL_IO_MEM;
+		up[(chip * 2) + 1].port.iotype = UPIO_MEM;
 		up[(chip * 2) + 1].port.irq = zilog_irq;
 		up[(chip * 2) + 1].port.uartclk = ZS_CLOCK;
 		up[(chip * 2) + 1].port.fifosize = 1;
diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c
index 9378895a8d56..df705fda4243 100644
--- a/drivers/serial/v850e_uart.c
+++ b/drivers/serial/v850e_uart.c
@@ -496,7 +496,7 @@ static int __init v850e_uart_init (void)
 
 			port->ops = &v850e_uart_ops;
 			port->line = chan;
-			port->iotype = SERIAL_IO_MEM;
+			port->iotype = UPIO_MEM;
 			port->flags = UPF_BOOT_AUTOCONF;
 
 			/* We actually use multiple IRQs, but the serial
diff --git a/drivers/sn/ioc3.c b/drivers/sn/ioc3.c
index c70ae81b5d98..12357e1fa558 100644
--- a/drivers/sn/ioc3.c
+++ b/drivers/sn/ioc3.c
@@ -38,10 +38,10 @@ static inline unsigned mcr_pack(unsigned pulse, unsigned sample)
 
 static int nic_wait(struct ioc3_driver_data *idd)
 {
-	volatile unsigned mcr;
+	unsigned mcr;
 
         do {
-                mcr = (volatile unsigned)idd->vma->mcr;
+                mcr = readl(&idd->vma->mcr);
         } while (!(mcr & 2));
 
         return mcr & 1;
@@ -53,7 +53,7 @@ static int nic_reset(struct ioc3_driver_data *idd)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	idd->vma->mcr = mcr_pack(500, 65);
+	writel(mcr_pack(500, 65), &idd->vma->mcr);
 	presence = nic_wait(idd);
 	local_irq_restore(flags);
 
@@ -68,7 +68,7 @@ static inline int nic_read_bit(struct ioc3_driver_data *idd)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	idd->vma->mcr = mcr_pack(6, 13);
+	writel(mcr_pack(6, 13), &idd->vma->mcr);
 	result = nic_wait(idd);
 	local_irq_restore(flags);
 
@@ -80,9 +80,9 @@ static inline int nic_read_bit(struct ioc3_driver_data *idd)
 static inline void nic_write_bit(struct ioc3_driver_data *idd, int bit)
 {
 	if (bit)
-		idd->vma->mcr = mcr_pack(6, 110);
+		writel(mcr_pack(6, 110), &idd->vma->mcr);
 	else
-		idd->vma->mcr = mcr_pack(80, 30);
+		writel(mcr_pack(80, 30), &idd->vma->mcr);
 
 	nic_wait(idd);
 }
@@ -337,7 +337,7 @@ static void probe_nic(struct ioc3_driver_data *idd)
         int save = 0, loops = 3;
         unsigned long first, addr;
 
-        idd->vma->gpcr_s = GPCR_MLAN_EN;
+        writel(GPCR_MLAN_EN, &idd->vma->gpcr_s);
 
         while(loops>0) {
                 idd->nic_part[0] = 0;
@@ -408,7 +408,7 @@ static irqreturn_t ioc3_intr_io(int irq, void *arg, struct pt_regs *regs)
 
 	read_lock_irqsave(&ioc3_submodules_lock, flags);
 
-	if(idd->dual_irq && idd->vma->eisr) {
+	if(idd->dual_irq && readb(&idd->vma->eisr)) {
 		/* send Ethernet IRQ to the driver */
 		if(ioc3_ethernet && idd->active[ioc3_ethernet->id] &&
 						ioc3_ethernet->intr) {
@@ -682,7 +682,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 	idd->id = ioc3_counter++;
 	up_write(&ioc3_devices_rwsem);
 
-	idd->gpdr_shadow = idd->vma->gpdr;
+	idd->gpdr_shadow = readl(&idd->vma->gpdr);
 
 	/* Read IOC3 NIC contents */
 	probe_nic(idd);
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index b77dbd63e596..7a75faeb0526 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -75,16 +75,6 @@ config SPI_BUTTERFLY
 	  inexpensive battery powered microcontroller evaluation board.
 	  This same cable can be used to flash new firmware.
 
-config SPI_BUTTERFLY
-	tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)"
-	depends on SPI_MASTER && PARPORT && EXPERIMENTAL
-	select SPI_BITBANG
-	help
-	  This uses a custom parallel port cable to connect to an AVR
-	  Butterfly <http://www.atmel.com/products/avr/butterfly>, an
-	  inexpensive battery powered microcontroller evaluation board.
-	  This same cable can be used to flash new firmware.
-
 #
 # Add new SPI master controllers in alphabetical order above this line
 #
diff --git a/drivers/spi/spi_butterfly.c b/drivers/spi/spi_butterfly.c
index 79a3c59615ab..ff9e5faa4dc9 100644
--- a/drivers/spi/spi_butterfly.c
+++ b/drivers/spi/spi_butterfly.c
@@ -163,21 +163,20 @@ static void butterfly_chipselect(struct spi_device *spi, int value)
 	struct butterfly	*pp = spidev_to_pp(spi);
 
 	/* set default clock polarity */
-	if (value)
+	if (value != BITBANG_CS_INACTIVE)
 		setsck(spi, spi->mode & SPI_CPOL);
 
 	/* no chipselect on this USI link config */
 	if (is_usidev(spi))
 		return;
 
-	/* here, value == "activate or not" */
-
-	/* most PARPORT_CONTROL_* bits are negated */
+	/* here, value == "activate or not";
+	 * most PARPORT_CONTROL_* bits are negated, so we must
+	 * morph it to value == "bit value to write in control register"
+	 */
 	if (spi_cs_bit == PARPORT_CONTROL_INIT)
 		value = !value;
 
-	/* here, value == "bit value to write in control register"  */
-
 	parport_frob_control(pp->port, spi_cs_bit, value ? spi_cs_bit : 0);
 }
 
@@ -202,7 +201,9 @@ butterfly_txrx_word_mode0(struct spi_device *spi,
 
 /* override default partitioning with cmdlinepart */
 static struct mtd_partition partitions[] = { {
-	/* JFFS2 wants partitions of 4*N blocks for this device ... */
+	/* JFFS2 wants partitions of 4*N blocks for this device,
+	 * so sectors 0 and 1 can't be partitions by themselves.
+	 */
 
 	/* sector 0 = 8 pages * 264 bytes/page (1 block)
 	 * sector 1 = 248 pages * 264 bytes/page
@@ -316,8 +317,9 @@ static void butterfly_attach(struct parport *p)
 	if (status < 0)
 		goto clean2;
 
-	/* Bus 1 lets us talk to at45db041b (firmware disables AVR)
-	 * or AVR (firmware resets at45, acts as spi slave)
+	/* Bus 1 lets us talk to at45db041b (firmware disables AVR SPI), AVR
+	 * (firmware resets at45, acts as spi slave) or neither (we ignore
+	 * both, AVR uses AT45).  Here we expect firmware for the first option.
 	 */
 	pp->info[0].max_speed_hz = 15 * 1000 * 1000;
 	strcpy(pp->info[0].modalias, "mtd_dataflash");
@@ -330,7 +332,9 @@ static void butterfly_attach(struct parport *p)
 				pp->dataflash->dev.bus_id);
 
 #ifdef	HAVE_USI
-	/* even more custom AVR firmware */
+	/* Bus 2 is only for talking to the AVR, and it can work no
+	 * matter who masters bus 1; needs appropriate AVR firmware.
+	 */
 	pp->info[1].max_speed_hz = 10 /* ?? */ * 1000 * 1000;
 	strcpy(pp->info[1].modalias, "butterfly");
 	// pp->info[1].platform_data = ... TBD ... ;
@@ -378,13 +382,8 @@ static void butterfly_detach(struct parport *p)
 	pp = butterfly;
 	butterfly = NULL;
 
-#ifdef	HAVE_USI
-	spi_unregister_device(pp->butterfly);
-	pp->butterfly = NULL;
-#endif
-	spi_unregister_device(pp->dataflash);
-	pp->dataflash = NULL;
-
+	/* stop() unregisters child devices too */
+	pdev = to_platform_device(pp->bitbang.master->cdev.dev);
 	status = spi_bitbang_stop(&pp->bitbang);
 
 	/* turn off VCC */
@@ -394,8 +393,6 @@ static void butterfly_detach(struct parport *p)
 	parport_release(pp->pd);
 	parport_unregister_device(pp->pd);
 
-	pdev = to_platform_device(pp->bitbang.master->cdev.dev);
-
 	(void) spi_master_put(pp->bitbang.master);
 
 	platform_device_unregister(pdev);
@@ -420,4 +417,5 @@ static void __exit butterfly_exit(void)
 }
 module_exit(butterfly_exit);
 
+MODULE_DESCRIPTION("Parport Adapter driver for AVR Butterfly");
 MODULE_LICENSE("GPL");
diff --git a/drivers/tc/tc.c b/drivers/tc/tc.c
index a0e5af638e0e..4a51e56f85b6 100644
--- a/drivers/tc/tc.c
+++ b/drivers/tc/tc.c
@@ -17,7 +17,6 @@
 #include <linux/types.h>
 
 #include <asm/addrspace.h>
-#include <asm/bug.h>
 #include <asm/errno.h>
 #include <asm/io.h>
 #include <asm/paccess.h>
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index f6704688ee8c..5578a9dd04e8 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -3558,10 +3558,16 @@ static void ixj_write_frame(IXJ *j)
 				}
 			/* Add word 0 to G.729 frames for the 8021.  Right now we don't do VAD/CNG  */
 				if (j->play_codec == G729 && (cnt == 0 || cnt == 10 || cnt == 20)) {
-					if(j->write_buffer_rp + cnt == 0 && j->write_buffer_rp + cnt + 1 == 0 && j->write_buffer_rp + cnt + 2 == 0 &&
-					   j->write_buffer_rp + cnt + 3 == 0 && j->write_buffer_rp + cnt + 4 == 0 && j->write_buffer_rp + cnt + 5 == 0 &&
-					   j->write_buffer_rp + cnt + 6 == 0 && j->write_buffer_rp + cnt + 7 == 0 && j->write_buffer_rp + cnt + 8 == 0 &&
-					   j->write_buffer_rp + cnt + 9 == 0) {
+					if (j->write_buffer_rp[cnt] == 0 &&
+					    j->write_buffer_rp[cnt + 1] == 0 &&
+					    j->write_buffer_rp[cnt + 2] == 0 &&
+					    j->write_buffer_rp[cnt + 3] == 0 &&
+					    j->write_buffer_rp[cnt + 4] == 0 &&
+					    j->write_buffer_rp[cnt + 5] == 0 &&
+					    j->write_buffer_rp[cnt + 6] == 0 &&
+					    j->write_buffer_rp[cnt + 7] == 0 &&
+					    j->write_buffer_rp[cnt + 8] == 0 &&
+					    j->write_buffer_rp[cnt + 9] == 0) {
 					/* someone is trying to write silence lets make this a type 0 frame. */
 						outb_p(0x00, j->DSPbase + 0x0C);
 						outb_p(0x00, j->DSPbase + 0x0D);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 076462c8ba2a..dce9d987f0fc 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -378,7 +378,7 @@ const struct usb_device_id *usb_match_id(struct usb_interface *interface,
 
 	return NULL;
 }
-EXPORT_SYMBOL_GPL(usb_match_id);
+EXPORT_SYMBOL(usb_match_id);
 
 int usb_device_match(struct device *dev, struct device_driver *drv)
 {
@@ -446,7 +446,7 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner)
 
 	return retval;
 }
-EXPORT_SYMBOL_GPL(usb_register_driver);
+EXPORT_SYMBOL(usb_register_driver);
 
 /**
  * usb_deregister - unregister a USB driver
@@ -469,4 +469,4 @@ void usb_deregister(struct usb_driver *driver)
 
 	usbfs_update_special();
 }
-EXPORT_SYMBOL_GPL(usb_deregister);
+EXPORT_SYMBOL(usb_deregister);
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 9d5015e99372..bd39bbd88d41 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -13,7 +13,6 @@
 #include <linux/ctype.h>
 #include <linux/err.h>
 #include <linux/fb.h>
-#include <asm/bug.h>
 
 static ssize_t backlight_show_power(struct class_device *cdev, char *buf)
 {
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index 68c690605aa7..9e32485ee7bb 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -13,7 +13,6 @@
 #include <linux/ctype.h>
 #include <linux/err.h>
 #include <linux/fb.h>
-#include <asm/bug.h>
 
 static ssize_t lcd_show_power(struct class_device *cdev, char *buf)
 {
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index a7bcd17112c0..0339f5640a78 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -30,10 +30,11 @@
 
 #define STI_DRIVERVERSION "Version 0.9a"
 
-struct sti_struct *default_sti;
+struct sti_struct *default_sti __read_mostly;
 
-static int num_sti_roms;			  /* # of STI ROMS found */
-static struct sti_struct *sti_roms[MAX_STI_ROMS]; /* ptr to each sti_struct */
+/* number of STI ROMS found and their ptrs to each struct */
+static int num_sti_roms __read_mostly;
+static struct sti_struct *sti_roms[MAX_STI_ROMS] __read_mostly;
 
 
 /* The colour indices used by STI are
@@ -266,7 +267,7 @@ sti_rom_copy(unsigned long base, unsigned long count, void *dest)
 
 
 
-static char default_sti_path[21];
+static char default_sti_path[21] __read_mostly;
 
 #ifndef MODULE
 static int __init sti_setup(char *str)
@@ -414,10 +415,10 @@ sti_init_glob_cfg(struct sti_struct *sti,
 	if (!sti->sti_mem_request)
 		sti->sti_mem_request = 256; /* STI default */
 
-	glob_cfg = kmalloc(sizeof(*sti->glob_cfg), GFP_KERNEL);
-	glob_cfg_ext = kmalloc(sizeof(*glob_cfg_ext), GFP_KERNEL);
-	save_addr = kmalloc(save_addr_size, GFP_KERNEL);
-	sti_mem_addr = kmalloc(sti->sti_mem_request, GFP_KERNEL);
+	glob_cfg = kzalloc(sizeof(*sti->glob_cfg), GFP_KERNEL);
+	glob_cfg_ext = kzalloc(sizeof(*glob_cfg_ext), GFP_KERNEL);
+	save_addr = kzalloc(save_addr_size, GFP_KERNEL);
+	sti_mem_addr = kzalloc(sti->sti_mem_request, GFP_KERNEL);
 
 	if (!(glob_cfg && glob_cfg_ext && save_addr && sti_mem_addr)) {
 		kfree(glob_cfg);
@@ -427,11 +428,6 @@ sti_init_glob_cfg(struct sti_struct *sti,
 		return -ENOMEM;
 	}
 
-	memset(glob_cfg, 0, sizeof(*glob_cfg));
-	memset(glob_cfg_ext, 0, sizeof(*glob_cfg_ext));
-	memset(save_addr, 0, save_addr_size);
-	memset(sti_mem_addr, 0, sti->sti_mem_request);
-
 	glob_cfg->ext_ptr = STI_PTR(glob_cfg_ext);
 	glob_cfg->save_addr = STI_PTR(save_addr);
 	for (i=0; i<8; i++) {
@@ -502,9 +498,9 @@ sti_init_glob_cfg(struct sti_struct *sti,
 
 #ifdef CONFIG_FB
 struct sti_cooked_font * __init
-sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name )
+sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
 {
-	struct font_desc *fbfont;
+	const struct font_desc *fbfont;
 	unsigned int size, bpc;
 	void *dest;
 	struct sti_rom_font *nf;
@@ -525,10 +521,9 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name )
 	size = bpc * 256;
 	size += sizeof(struct sti_rom_font);
 
-	nf = kmalloc(size, GFP_KERNEL);
+	nf = kzalloc(size, GFP_KERNEL);
 	if (!nf)
 		return NULL;
-	memset(nf, 0, size);
 
 	nf->first_char = 0;
 	nf->last_char = 255;
@@ -544,7 +539,7 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name )
 	dest += sizeof(struct sti_rom_font);
 	memcpy(dest, fbfont->data, bpc*256);
 
-	cooked_font = kmalloc(sizeof(*cooked_font), GFP_KERNEL);
+	cooked_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL);
 	if (!cooked_font) {
 		kfree(nf);
 		return NULL;
@@ -559,7 +554,7 @@ sti_select_fbfont( struct sti_cooked_rom *cooked_rom, char *fbfont_name )
 }
 #else
 struct sti_cooked_font * __init
-sti_select_fbfont(struct sti_cooked_rom *cooked_rom, char *fbfont_name)
+sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
 {
 	return NULL;
 }
@@ -617,7 +612,7 @@ sti_cook_fonts(struct sti_cooked_rom *cooked_rom,
 	struct sti_rom_font *raw_font, *font_start;
 	struct sti_cooked_font *cooked_font;
 	
-	cooked_font = kmalloc(sizeof(*cooked_font), GFP_KERNEL);
+	cooked_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL);
 	if (!cooked_font)
 		return 0;
 
@@ -631,7 +626,7 @@ sti_cook_fonts(struct sti_cooked_rom *cooked_rom,
 	while (raw_font->next_font) {
 		raw_font = ((void *)font_start) + (raw_font->next_font);
 
-		cooked_font->next_font = kmalloc(sizeof(*cooked_font), GFP_KERNEL);
+		cooked_font->next_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL);
 		if (!cooked_font->next_font)
 			return 1;
 
@@ -668,10 +663,9 @@ sti_bmode_font_raw(struct sti_cooked_font *f)
 	unsigned char *n, *p, *q;
 	int size = f->raw->bytes_per_char*256+sizeof(struct sti_rom_font);
 	
-	n = kmalloc (4*size, GFP_KERNEL);
+	n = kzalloc (4*size, GFP_KERNEL);
 	if (!n)
 		return NULL;
-	memset (n, 0, 4*size);
 	p = n + 3;
 	q = (unsigned char *)f->raw;
 	while (size--) {
@@ -816,13 +810,12 @@ sti_try_rom_generic(unsigned long address, unsigned long hpa, struct pci_dev *pd
 		return NULL;
 	}
 	
-	sti = kmalloc(sizeof(*sti), GFP_KERNEL);
+	sti = kzalloc(sizeof(*sti), GFP_KERNEL);
 	if (!sti) {
 		printk(KERN_ERR "Not enough memory !\n");
 		return NULL;
 	}
 
-	memset(sti, 0, sizeof(*sti));
 	spin_lock_init(&sti->lock);
 
 test_rom:
@@ -1035,7 +1028,7 @@ static struct parisc_driver pa_sti_driver = {
  * sti_init_roms() - detects all STI ROMs and stores them in sti_roms[]
  */
 
-static int sticore_initialized;
+static int sticore_initialized __read_mostly;
 
 static void __init sti_init_roms(void)
 {
diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/pmag-ba-fb.c
index f3927b6cda9d..f5361cd8ccce 100644
--- a/drivers/video/pmag-ba-fb.c
+++ b/drivers/video/pmag-ba-fb.c
@@ -30,7 +30,6 @@
 #include <linux/module.h>
 #include <linux/types.h>
 
-#include <asm/bug.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/pmagb-b-fb.c
index 25148de5fe67..eeeac924b500 100644
--- a/drivers/video/pmagb-b-fb.c
+++ b/drivers/video/pmagb-b-fb.c
@@ -27,7 +27,6 @@
 #include <linux/module.h>
 #include <linux/types.h>
 
-#include <asm/bug.h>
 #include <asm/io.h>
 #include <asm/system.h>