[PATCH] s390: dasd partition detection

DASD allows to open a device as soon as gendisk is registered, which means the
device is a fake device (capacity=0) and we do know nothing about blocksize
and partitions at that point of time.  In case the device is opened by
someone, the bdev and inode creation is done with the fake device info and the
following partition detection code is just using the wrong data.

To avoid this modify the DASD state machine to make sure that the open is
rejected until the device analysis is either finished or an unformatted device
was detected.

Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

4 files changed, 36 insertions, 14 deletions

diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index af1d5b404cee..33157c84d1d3 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -215,9 +215,10 @@ dasd_state_basic_to_known(struct dasd_device * device)
  * interrupt for this detection ccw uses the kernel event daemon to
  * trigger the call to dasd_change_state. All this is done in the
  * discipline code, see dasd_eckd.c.
- * After the analysis ccw is done (do_analysis returned 0 or error)
- * the block device is setup. Either a fake disk is added to allow
- * formatting or a proper device request queue is created.
+ * After the analysis ccw is done (do_analysis returned 0) the block
+ * device is setup.
+ * In case the analysis returns an error, the device setup is stopped
+ * (a fake disk was already added to allow formatting).
  */
 static inline int
 dasd_state_basic_to_ready(struct dasd_device * device)
@@ -227,13 +228,19 @@ dasd_state_basic_to_ready(struct dasd_device * device)
 	rc = 0;
 	if (device->discipline->do_analysis != NULL)
 		rc = device->discipline->do_analysis(device);
-	if (rc)
+	if (rc) {
+		if (rc != -EAGAIN)
+			device->state = DASD_STATE_UNFMT;
 		return rc;
+	}
+	/* make disk known with correct capacity */
 	dasd_setup_queue(device);
+	set_capacity(device->gdp, device->blocks << device->s2b_shift);
 	device->state = DASD_STATE_READY;
-	if (dasd_scan_partitions(device) != 0)
+	rc = dasd_scan_partitions(device);
+	if (rc)
 		device->state = DASD_STATE_BASIC;
-	return 0;
+	return rc;
 }
 
 /*
@@ -254,6 +261,15 @@ dasd_state_ready_to_basic(struct dasd_device * device)
 }
 
 /*
+ * Back to basic.
+ */
+static inline void
+dasd_state_unfmt_to_basic(struct dasd_device * device)
+{
+	device->state = DASD_STATE_BASIC;
+}
+
+/*
  * Make the device online and schedule the bottom half to start
  * the requeueing of requests from the linux request queue to the
  * ccw queue.
@@ -319,8 +335,12 @@ dasd_decrease_state(struct dasd_device *device)
 	if (device->state == DASD_STATE_READY &&
 	    device->target <= DASD_STATE_BASIC)
 		dasd_state_ready_to_basic(device);
-	
-	if (device->state == DASD_STATE_BASIC && 
+
+	if (device->state == DASD_STATE_UNFMT &&
+	    device->target <= DASD_STATE_BASIC)
+		dasd_state_unfmt_to_basic(device);
+
+	if (device->state == DASD_STATE_BASIC &&
 	    device->target <= DASD_STATE_KNOWN)
 		dasd_state_basic_to_known(device);
 	
@@ -1722,7 +1742,7 @@ dasd_open(struct inode *inp, struct file *filp)
 		goto out;
 	}
 
-	if (device->state < DASD_STATE_BASIC) {
+	if (device->state <= DASD_STATE_BASIC) {
 		DBF_DEV_EVENT(DBF_ERR, device, " %s",
 			      " Cannot open unrecognized device");
 		rc = -ENODEV;
diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c
index 65dc844b975c..fce2835e7d19 100644
--- a/drivers/s390/block/dasd_genhd.c
+++ b/drivers/s390/block/dasd_genhd.c
@@ -100,8 +100,6 @@ dasd_scan_partitions(struct dasd_device * device)
 {
 	struct block_device *bdev;
 
-	/* Make the disk known. */
-	set_capacity(device->gdp, device->blocks << device->s2b_shift);
 	bdev = bdget_disk(device->gdp, 0);
 	if (!bdev || blkdev_get(bdev, FMODE_READ, 1) < 0)
 		return -ENODEV;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 0592354cc604..7cb0b9e78a6a 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -26,7 +26,7 @@
  *   new: the dasd_device structure is allocated.
  *   known: the discipline for the device is identified.
  *   basic: the device can do basic i/o.
- *   accept: the device is analysed (format is known).
+ *   unfmt: the device could not be analyzed (format is unknown).
  *   ready: partition detection is done and the device is can do block io.
  *   online: the device accepts requests from the block device queue.
  *
@@ -47,8 +47,9 @@
 #define DASD_STATE_NEW	  0
 #define DASD_STATE_KNOWN  1
 #define DASD_STATE_BASIC  2
-#define DASD_STATE_READY  3
-#define DASD_STATE_ONLINE 4
+#define DASD_STATE_UNFMT  3
+#define DASD_STATE_READY  4
+#define DASD_STATE_ONLINE 5
 
 #include <linux/module.h>
 #include <linux/wait.h>
diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c
index 2d5da3c75ca7..4c1acc8daa82 100644
--- a/drivers/s390/block/dasd_proc.c
+++ b/drivers/s390/block/dasd_proc.c
@@ -93,6 +93,9 @@ dasd_devices_show(struct seq_file *m, void *v)
 	case DASD_STATE_BASIC:
 		seq_printf(m, "basic");
 		break;
+	case DASD_STATE_UNFMT:
+		seq_printf(m, "unnformatted");
+		break;
 	case DASD_STATE_READY:
 	case DASD_STATE_ONLINE:
 		seq_printf(m, "active ");